]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/UCP1020.h
projects / people / ms / u-boot.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
common/board_f.c: change the macro name and remove it for PPC platforms
[people/ms/u-boot.git] / include / configs / UCP1020.h
1 /*
2 * Copyright 2013-2015 Arcturus Networks, Inc.
3 * http://www.arcturusnetworks.com/products/ucp1020/
4 * based on include/configs/p1_p2_rdb_pc.h
5 * original copyright follows:
6 * Copyright 2009-2011 Freescale Semiconductor, Inc.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 /*
12 * QorIQ uCP1020-xx boards configuration file
13 */
14 #ifndef __CONFIG_H
15 #define __CONFIG_H
16
17 #define CONFIG_DISPLAY_BOARDINFO
18
19 #define CONFIG_FSL_ELBC
20 #define CONFIG_PCI
21 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
22 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
23 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
24 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
25 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
26 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
27
28 #if defined(CONFIG_TARTGET_UCP1020T1)
29
30 #define CONFIG_UCP1020_REV_1_3
31
32 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
33 #define CONFIG_P1020
34
35 #define CONFIG_TSEC_ENET
36 #define CONFIG_TSEC1
37 #define CONFIG_TSEC3
38 #define CONFIG_HAS_ETH0
39 #define CONFIG_HAS_ETH1
40 #define CONFIG_ETHADDR 00:19:D3:FF:FF:FF
41 #define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE
42 #define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD
43 #define CONFIG_IPADDR 10.80.41.229
44 #define CONFIG_SERVERIP 10.80.41.227
45 #define CONFIG_NETMASK 255.255.252.0
46 #define CONFIG_ETHPRIME "eTSEC3"
47
48 #ifndef CONFIG_SPI_FLASH
49 #endif
50 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
51
52 #define CONFIG_MMC
53 #define CONFIG_SYS_L2_SIZE (256 << 10)
54
55 #define CONFIG_LAST_STAGE_INIT
56
57 #if !defined(CONFIG_DONGLE)
58 #define CONFIG_SILENT_CONSOLE
59 #endif
60
61 #endif
62
63 #if defined(CONFIG_TARGET_UCP1020)
64
65 #define CONFIG_UCP1020
66 #define CONFIG_UCP1020_REV_1_3
67
68 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
69 #define CONFIG_P1020
70
71 #define CONFIG_TSEC_ENET
72 #define CONFIG_TSEC1
73 #define CONFIG_TSEC2
74 #define CONFIG_TSEC3
75 #define CONFIG_HAS_ETH0
76 #define CONFIG_HAS_ETH1
77 #define CONFIG_HAS_ETH2
78 #define CONFIG_ETHADDR 00:06:3B:FF:FF:FF
79 #define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE
80 #define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD
81 #define CONFIG_IPADDR 192.168.1.81
82 #define CONFIG_IPADDR1 192.168.1.82
83 #define CONFIG_IPADDR2 192.168.1.83
84 #define CONFIG_SERVERIP 192.168.1.80
85 #define CONFIG_GATEWAYIP 102.168.1.1
86 #define CONFIG_NETMASK 255.255.255.0
87 #define CONFIG_ETHPRIME "eTSEC1"
88
89 #ifndef CONFIG_SPI_FLASH
90 #endif
91 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
92
93 #define CONFIG_MMC
94 #define CONFIG_SYS_L2_SIZE (256 << 10)
95
96 #define CONFIG_LAST_STAGE_INIT
97
98 #endif
99
100 #ifdef CONFIG_SDCARD
101 #define CONFIG_RAMBOOT_SDCARD
102 #define CONFIG_SYS_RAMBOOT
103 #define CONFIG_SYS_EXTRA_ENV_RELOC
104 #define CONFIG_SYS_TEXT_BASE 0x11000000
105 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
106 #endif
107
108 #ifdef CONFIG_SPIFLASH
109 #define CONFIG_RAMBOOT_SPIFLASH
110 #define CONFIG_SYS_RAMBOOT
111 #define CONFIG_SYS_EXTRA_ENV_RELOC
112 #define CONFIG_SYS_TEXT_BASE 0x11000000
113 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
114 #endif
115
116 #ifndef CONFIG_SYS_TEXT_BASE
117 #define CONFIG_SYS_TEXT_BASE 0xeff80000
118 #endif
119 #define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000
120
121 #ifndef CONFIG_RESET_VECTOR_ADDRESS
122 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
123 #endif
124
125 #ifndef CONFIG_SYS_MONITOR_BASE
126 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
127 #endif
128
129 /* High Level Configuration Options */
130 #define CONFIG_BOOKE
131 #define CONFIG_E500
132 /* #define CONFIG_MPC85xx */
133
134 #define CONFIG_MP
135
136 #define CONFIG_FSL_LAW
137
138 #define CONFIG_ENV_OVERWRITE
139
140 #define CONFIG_CMD_SATA
141 #define CONFIG_SATA_SIL
142 #define CONFIG_SYS_SATA_MAX_DEVICE 2
143 #define CONFIG_LIBATA
144 #define CONFIG_LBA48
145
146 #define CONFIG_SYS_CLK_FREQ 66666666
147 #define CONFIG_DDR_CLK_FREQ 66666666
148
149 #define CONFIG_HWCONFIG
150
151 #define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
152 #define CONFIG_SYS_DTT_BUS_NUM 1 /* The I2C bus for DTT */
153 #define CONFIG_DTT_SENSORS { 0, 1 } /* Sensor index */
154 /*
155 * ADM1021/NCT72 temp sensor configuration (see dtt/adm1021.c for details).
156 * there will be one entry in this array for each two (dummy) sensors in
157 * CONFIG_DTT_SENSORS.
158 *
159 * For uCP1020 module:
160 * - only one ADM1021/NCT72
161 * - i2c addr 0x41
162 * - conversion rate 0x02 = 0.25 conversions/second
163 * - ALERT output disabled
164 * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
165 * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
166 */
167 #define CONFIG_SYS_DTT_ADM1021 { { CONFIG_SYS_I2C_NCT72_ADDR, \
168 0x02, 0, 1, 0, 85, 1, 0, 85} }
169
170 #define CONFIG_CMD_DTT
171
172 /*
173 * These can be toggled for performance analysis, otherwise use default.
174 */
175 #define CONFIG_L2_CACHE
176 #define CONFIG_BTB
177
178 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
179
180 #define CONFIG_ENABLE_36BIT_PHYS
181
182 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
183 #define CONFIG_SYS_MEMTEST_END 0x1fffffff
184 #define CONFIG_PANIC_HANG /* do not reset board on panic */
185
186 #define CONFIG_SYS_CCSRBAR 0xffe00000
187 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
188
189 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
190 SPL code*/
191 #ifdef CONFIG_SPL_BUILD
192 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
193 #endif
194
195 /* DDR Setup */
196 #define CONFIG_DDR_ECC_ENABLE
197 #define CONFIG_SYS_FSL_DDR3
198 #ifndef CONFIG_DDR_ECC_ENABLE
199 #define CONFIG_SYS_DDR_RAW_TIMING
200 #define CONFIG_DDR_SPD
201 #endif
202 #define CONFIG_SYS_SPD_BUS_NUM 1
203 #undef CONFIG_FSL_DDR_INTERACTIVE
204
205 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M
206 #define CONFIG_CHIP_SELECTS_PER_CTRL 1
207 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
208 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
209 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
210
211 #define CONFIG_NUM_DDR_CONTROLLERS 1
212 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
213
214 /* Default settings for DDR3 */
215 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
216 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
217 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
218 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
219 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
220 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
221
222 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
223 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
224 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
225 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
226
227 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
228 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
229 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
230 #define CONFIG_SYS_DDR_RCW_1 0x00000000
231 #define CONFIG_SYS_DDR_RCW_2 0x00000000
232 #ifdef CONFIG_DDR_ECC_ENABLE
233 #define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */
234 #else
235 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
236 #endif
237 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050
238 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
239 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
240
241 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
242 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
243 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
244 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
245 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
246 #define CONFIG_SYS_DDR_MODE_1 0x40461520
247 #define CONFIG_SYS_DDR_MODE_2 0x8000c000
248 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000
249
250 #undef CONFIG_CLOCKS_IN_MHZ
251
252 /*
253 * Memory map
254 *
255 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
256 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2)
257 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
258 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable
259 * (early boot only)
260 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
261 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
262 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
263 */
264
265 /*
266 * Local Bus Definitions
267 */
268 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
269 #define CONFIG_SYS_FLASH_BASE 0xec000000
270
271 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
272
273 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
274 | BR_PS_16 | BR_V)
275
276 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
277
278 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
279 #define CONFIG_SYS_FLASH_QUIET_TEST
280 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
281
282 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
283
284 #undef CONFIG_SYS_FLASH_CHECKSUM
285 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
286 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
287
288 #define CONFIG_FLASH_CFI_DRIVER
289 #define CONFIG_SYS_FLASH_CFI
290 #define CONFIG_SYS_FLASH_EMPTY_INFO
291 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
292
293 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
294
295 #define CONFIG_SYS_INIT_RAM_LOCK
296 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
297 /* Initial L1 address */
298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
300 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
301 /* Size of used area in RAM */
302 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
303
304 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
305 GENERATED_GBL_DATA_SIZE)
306 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
307
308 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
309 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
310
311 #define CONFIG_SYS_PMC_BASE 0xff980000
312 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
313 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
314 BR_PS_8 | BR_V)
315 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
316 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
317 OR_GPCM_EAD)
318
319 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
320 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
321 #ifdef CONFIG_NAND_FSL_ELBC
322 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
323 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
324 #endif
325
326 /* Serial Port - controlled on board with jumper J8
327 * open - index 2
328 * shorted - index 1
329 */
330 #define CONFIG_CONS_INDEX 1
331 #undef CONFIG_SERIAL_SOFTWARE_FIFO
332 #define CONFIG_SYS_NS16550
333 #define CONFIG_SYS_NS16550_SERIAL
334 #define CONFIG_SYS_NS16550_REG_SIZE 1
335 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
336 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
337 #define CONFIG_NS16550_MIN_FUNCTIONS
338 #endif
339
340 #define CONFIG_SYS_BAUDRATE_TABLE \
341 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
342
343 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
344 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
345
346 /* Use the HUSH parser */
347 #define CONFIG_SYS_HUSH_PARSER
348
349 /*
350 * Pass open firmware flat tree
351 */
352 #define CONFIG_OF_LIBFDT
353 #define CONFIG_OF_BOARD_SETUP
354 #define CONFIG_OF_STDOUT_VIA_ALIAS
355
356 /* new uImage format support */
357 #define CONFIG_FIT
358 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
359
360 /* I2C */
361 #define CONFIG_SYS_I2C
362 #define CONFIG_SYS_I2C_FSL
363 #define CONFIG_SYS_FSL_I2C_SPEED 400000
364 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
365 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
366 #define CONFIG_SYS_FSL_I2C2_SPEED 400000
367 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
368 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
369 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
370 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
371
372 #define CONFIG_RTC_DS1337
373 #define CONFIG_SYS_RTC_DS1337_NOOSC
374 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
375 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
376 #define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
377 #define CONFIG_SYS_I2C_IDT6V49205B 0x69
378
379 /*
380 * eSPI - Enhanced SPI
381 */
382 #define CONFIG_HARD_SPI
383 #define CONFIG_FSL_ESPI
384
385 #define CONFIG_SPI_FLASH_SST 1
386 #define CONFIG_SPI_FLASH_STMICRO 1
387 #define CONFIG_SPI_FLASH_WINBOND 1
388 #define CONFIG_CMD_SF 1
389 #define CONFIG_CMD_SPI 1
390 #define CONFIG_SF_DEFAULT_SPEED 10000000
391 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
392
393 #if defined(CONFIG_PCI)
394 /*
395 * General PCI
396 * Memory space is mapped 1-1, but I/O space must start from 0.
397 */
398
399 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
400 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9"
401 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
402 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
403 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
404 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
405 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
406 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
407 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
408 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
409
410 /* controller 1, Slot 2, tgtid 1, Base address a000 */
411 #define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10"
412 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
413 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
414 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
415 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
416 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
417 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
418 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
419 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
420
421 #define CONFIG_PCI_PNP /* do pci plug-and-play */
422 #define CONFIG_CMD_PCI
423
424 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
425 #define CONFIG_DOS_PARTITION
426 #endif /* CONFIG_PCI */
427
428 /*
429 * Environment
430 */
431 #ifdef CONFIG_ENV_FIT_UCBOOT
432
433 #define CONFIG_ENV_IS_IN_FLASH
434 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000)
435 #define CONFIG_ENV_SIZE 0x20000
436 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
437
438 #else
439
440 #define CONFIG_ENV_SPI_BUS 0
441 #define CONFIG_ENV_SPI_CS 0
442 #define CONFIG_ENV_SPI_MAX_HZ 10000000
443 #define CONFIG_ENV_SPI_MODE 0
444
445 #ifdef CONFIG_RAMBOOT_SPIFLASH
446
447 #define CONFIG_ENV_IS_IN_SPI_FLASH
448 #define CONFIG_ENV_SIZE 0x3000 /* 12KB */
449 #define CONFIG_ENV_OFFSET 0x2000 /* 8KB */
450 #define CONFIG_ENV_SECT_SIZE 0x1000
451
452 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
453 /* Address and size of Redundant Environment Sector */
454 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
455 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
456 #endif
457
458 #elif defined(CONFIG_RAMBOOT_SDCARD)
459 #define CONFIG_ENV_IS_IN_MMC
460 #define CONFIG_FSL_FIXED_MMC_LOCATION
461 #define CONFIG_ENV_SIZE 0x2000
462 #define CONFIG_SYS_MMC_ENV_DEV 0
463
464 #elif defined(CONFIG_SYS_RAMBOOT)
465 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
466 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
467 #define CONFIG_ENV_SIZE 0x2000
468
469 #else
470 #define CONFIG_ENV_IS_IN_FLASH
471 #define CONFIG_ENV_BASE (CONFIG_SYS_FLASH_BASE)
472 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
473 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
474 #define CONFIG_ENV_ADDR (CONFIG_ENV_BASE + 0xC0000)
475 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
476 /* Address and size of Redundant Environment Sector */
477 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
478 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
479 #endif
480
481 #endif
482
483 #endif /* CONFIG_ENV_FIT_UCBOOT */
484
485 #define CONFIG_LOADS_ECHO /* echo on for serial download */
486 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
487
488 /*
489 * Command line configuration.
490 */
491 #define CONFIG_CMD_IRQ
492 #define CONFIG_CMD_PING
493 #define CONFIG_CMD_I2C
494 #define CONFIG_CMD_MII
495 #define CONFIG_CMD_DATE
496 #define CONFIG_CMD_I2C
497 #define CONFIG_CMD_IRQ
498 #define CONFIG_CMD_MII
499 #define CONFIG_CMD_PING
500 #define CONFIG_CMD_REGINFO
501 #define CONFIG_CMD_ERRATA
502 #define CONFIG_CMD_CRAMFS
503 #define CONFIG_CRAMFS_CMDLINE
504
505 /*
506 * USB
507 */
508 #define CONFIG_HAS_FSL_DR_USB
509
510 #if defined(CONFIG_HAS_FSL_DR_USB)
511 #define CONFIG_USB_EHCI
512
513 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
514
515 #ifdef CONFIG_USB_EHCI
516 #define CONFIG_CMD_USB
517 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
518 #define CONFIG_USB_EHCI_FSL
519 #define CONFIG_USB_STORAGE
520 #endif
521 #endif
522
523 #undef CONFIG_WATCHDOG /* watchdog disabled */
524
525 #ifdef CONFIG_MMC
526 #define CONFIG_FSL_ESDHC
527 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
528 #define CONFIG_CMD_MMC
529 #define CONFIG_MMC_SPI
530 #define CONFIG_CMD_MMC_SPI
531 #define CONFIG_GENERIC_MMC
532 #endif
533
534 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) || defined(CONFIG_FSL_SATA)
535 #define CONFIG_CMD_EXT2
536 #define CONFIG_CMD_FAT
537 #define CONFIG_DOS_PARTITION
538 #endif
539
540 /* Misc Extra Settings */
541 #define CONFIG_CMD_GPIO 1
542 #undef CONFIG_WATCHDOG /* watchdog disabled */
543
544 /*
545 * Miscellaneous configurable options
546 */
547 #define CONFIG_SYS_LONGHELP /* undef to save memory */
548 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
549 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
550 #if defined(CONFIG_CMD_KGDB)
551 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
552 #else
553 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
554 #endif
555 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
556 /* Print Buffer Size */
557 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
558 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
559 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
560
561 /*
562 * For booting Linux, the board info and command line data
563 * have to be in the first 64 MB of memory, since this is
564 * the maximum mapped by the Linux kernel during initialization.
565 */
566 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
567 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
568
569 #if defined(CONFIG_CMD_KGDB)
570 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
571 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
572 #endif
573
574 /*
575 * Environment Configuration
576 */
577
578 #if defined(CONFIG_TSEC_ENET)
579
580 #if defined(CONFIG_UCP1020_REV_1_2)
581 #define CONFIG_PHY_MICREL_KSZ9021
582 #elif defined(CONFIG_UCP1020_REV_1_3)
583 #define CONFIG_PHY_MICREL_KSZ9031
584 #else
585 #error "UCP1020 module revision is not defined !!!"
586 #endif
587
588 #define CONFIG_CMD_DHCP
589 #define CONFIG_BOOTP_SERVERIP
590
591 #define CONFIG_MII /* MII PHY management */
592 #define CONFIG_TSEC1_NAME "eTSEC1"
593 #define CONFIG_TSEC2_NAME "eTSEC2"
594 #define CONFIG_TSEC3_NAME "eTSEC3"
595
596 #define TSEC1_PHY_ADDR 4
597 #define TSEC2_PHY_ADDR 0
598 #define TSEC2_PHY_ADDR_SGMII 0x00
599 #define TSEC3_PHY_ADDR 6
600
601 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
602 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
603 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
604
605 #define TSEC1_PHYIDX 0
606 #define TSEC2_PHYIDX 0
607 #define TSEC3_PHYIDX 0
608
609 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
610
611 #endif
612
613 #define CONFIG_HOSTNAME UCP1020
614 #define CONFIG_ROOTPATH "/opt/nfsroot"
615 #define CONFIG_BOOTFILE "uImage"
616 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
617
618 /* default location for tftp and bootm */
619 #define CONFIG_LOADADDR 1000000
620
621 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
622
623 #define CONFIG_BAUDRATE 115200
624
625 #if defined(CONFIG_DONGLE)
626
627 #define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
628 #define CONFIG_EXTRA_ENV_SETTINGS \
629 "bootcmd=run prog_spi_mbrbootcramfs\0" \
630 "bootfile=uImage\0" \
631 "consoledev=ttyS0\0" \
632 "cramfsfile=image.cramfs\0" \
633 "dtbaddr=0x00c00000\0" \
634 "dtbfile=image.dtb\0" \
635 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
636 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
637 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
638 "fileaddr=0x01000000\0" \
639 "filesize=0x00080000\0" \
640 "flashmbr=sf probe 0; " \
641 "tftp $loadaddr $mbr; " \
642 "sf erase $mbr_offset +$filesize; " \
643 "sf write $loadaddr $mbr_offset $filesize\0" \
644 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
645 "protect off $nor_recoveryaddr +$filesize; " \
646 "erase $nor_recoveryaddr +$filesize; " \
647 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
648 "protect on $nor_recoveryaddr +$filesize\0 " \
649 "flashuboot=tftp $ubootaddr $ubootfile; " \
650 "protect off $nor_ubootaddr +$filesize; " \
651 "erase $nor_ubootaddr +$filesize; " \
652 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
653 "protect on $nor_ubootaddr +$filesize\0 " \
654 "flashworking=tftp $workingaddr $cramfsfile; " \
655 "protect off $nor_workingaddr +$filesize; " \
656 "erase $nor_workingaddr +$filesize; " \
657 "cp.b $workingaddr $nor_workingaddr $filesize; " \
658 "protect on $nor_workingaddr +$filesize\0 " \
659 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
660 "kerneladdr=0x01100000\0" \
661 "kernelfile=uImage\0" \
662 "loadaddr=0x01000000\0" \
663 "mbr=uCP1020d.mbr\0" \
664 "mbr_offset=0x00000000\0" \
665 "mmbr=uCP1020Quiet.mbr\0" \
666 "mmcpart=0:2\0" \
667 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
668 "mmc erase 1 1; " \
669 "mmc write $loadaddr 1 1\0" \
670 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \
671 "mmc erase 0x40 0x400; " \
672 "mmc write $loadaddr 0x40 0x400\0" \
673 "netdev=eth0\0" \
674 "nor_recoveryaddr=0xEC0A0000\0" \
675 "nor_ubootaddr=0xEFF80000\0" \
676 "nor_workingaddr=0xECFA0000\0" \
677 "norbootrecovery=setenv bootargs $recoverybootargs" \
678 " console=$consoledev,$baudrate $othbootargs; " \
679 "run norloadrecovery; " \
680 "bootm $kerneladdr - $dtbaddr\0" \
681 "norbootworking=setenv bootargs $workingbootargs" \
682 " console=$consoledev,$baudrate $othbootargs; " \
683 "run norloadworking; " \
684 "bootm $kerneladdr - $dtbaddr\0" \
685 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
686 "setenv cramfsaddr $nor_recoveryaddr; " \
687 "cramfsload $dtbaddr $dtbfile; " \
688 "cramfsload $kerneladdr $kernelfile\0" \
689 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
690 "setenv cramfsaddr $nor_workingaddr; " \
691 "cramfsload $dtbaddr $dtbfile; " \
692 "cramfsload $kerneladdr $kernelfile\0" \
693 "prog_spi_mbr=run spi__mbr\0" \
694 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \
695 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
696 "run spi__cramfs\0" \
697 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
698 " console=$consoledev,$baudrate $othbootargs; " \
699 "tftp $rootfsaddr $rootfsfile; " \
700 "tftp $loadaddr $kernelfile; " \
701 "tftp $dtbaddr $dtbfile; " \
702 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
703 "ramdisk_size=120000\0" \
704 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
705 "recoveryaddr=0x02F00000\0" \
706 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
707 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
708 "mw.l 0xffe0f008 0x00400000\0" \
709 "rootfsaddr=0x02F00000\0" \
710 "rootfsfile=rootfs.ext2.gz.uboot\0" \
711 "rootpath=/opt/nfsroot\0" \
712 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
713 "protect off 0xeC000000 +$filesize; " \
714 "erase 0xEC000000 +$filesize; " \
715 "cp.b $loadaddr 0xEC000000 $filesize; " \
716 "cmp.b $loadaddr 0xEC000000 $filesize; " \
717 "protect on 0xeC000000 +$filesize\0" \
718 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
719 "protect off 0xeFF80000 +$filesize; " \
720 "erase 0xEFF80000 +$filesize; " \
721 "cp.b $loadaddr 0xEFF80000 $filesize; " \
722 "cmp.b $loadaddr 0xEFF80000 $filesize; " \
723 "protect on 0xeFF80000 +$filesize\0" \
724 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \
725 "sf probe 0; sf erase 0x8000 +$filesize; " \
726 "sf write $loadaddr 0x8000 $filesize\0" \
727 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \
728 "protect off 0xec0a0000 +$filesize; " \
729 "erase 0xeC0A0000 +$filesize; " \
730 "cp.b $loadaddr 0xeC0A0000 $filesize; " \
731 "protect on 0xec0a0000 +$filesize\0" \
732 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
733 "sf probe 1; sf erase 0 +$filesize; " \
734 "sf write $loadaddr 0 $filesize\0" \
735 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
736 "sf probe 0; sf erase 0 +$filesize; " \
737 "sf write $loadaddr 0 $filesize\0" \
738 "tftpflash=tftpboot $loadaddr $uboot; " \
739 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
740 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
741 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
742 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
743 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
744 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
745 "ubootaddr=0x01000000\0" \
746 "ubootfile=u-boot.bin\0" \
747 "ubootd=u-boot4dongle.bin\0" \
748 "upgrade=run flashworking\0" \
749 "usb_phy_type=ulpi\0 " \
750 "workingaddr=0x02F00000\0" \
751 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
752
753 #else
754
755 #if defined(CONFIG_UCP1020T1)
756
757 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */
758 #define CONFIG_EXTRA_ENV_SETTINGS \
759 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
760 "bootfile=uImage\0" \
761 "consoledev=ttyS0\0" \
762 "cramfsfile=image.cramfs\0" \
763 "dtbaddr=0x00c00000\0" \
764 "dtbfile=image.dtb\0" \
765 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
766 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
767 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
768 "fileaddr=0x01000000\0" \
769 "filesize=0x00080000\0" \
770 "flashmbr=sf probe 0; " \
771 "tftp $loadaddr $mbr; " \
772 "sf erase $mbr_offset +$filesize; " \
773 "sf write $loadaddr $mbr_offset $filesize\0" \
774 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \
775 "protect off $nor_recoveryaddr +$filesize; " \
776 "erase $nor_recoveryaddr +$filesize; " \
777 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
778 "protect on $nor_recoveryaddr +$filesize\0 " \
779 "flashuboot=tftp $ubootaddr $ubootfile; " \
780 "protect off $nor_ubootaddr +$filesize; " \
781 "erase $nor_ubootaddr +$filesize; " \
782 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
783 "protect on $nor_ubootaddr +$filesize\0 " \
784 "flashworking=tftp $workingaddr $cramfsfile; " \
785 "protect off $nor_workingaddr +$filesize; " \
786 "erase $nor_workingaddr +$filesize; " \
787 "cp.b $workingaddr $nor_workingaddr $filesize; " \
788 "protect on $nor_workingaddr +$filesize\0 " \
789 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
790 "kerneladdr=0x01100000\0" \
791 "kernelfile=uImage\0" \
792 "loadaddr=0x01000000\0" \
793 "mbr=uCP1020.mbr\0" \
794 "mbr_offset=0x00000000\0" \
795 "netdev=eth0\0" \
796 "nor_recoveryaddr=0xEC0A0000\0" \
797 "nor_ubootaddr=0xEFF80000\0" \
798 "nor_workingaddr=0xECFA0000\0" \
799 "norbootrecovery=setenv bootargs $recoverybootargs" \
800 " console=$consoledev,$baudrate $othbootargs; " \
801 "run norloadrecovery; " \
802 "bootm $kerneladdr - $dtbaddr\0" \
803 "norbootworking=setenv bootargs $workingbootargs" \
804 " console=$consoledev,$baudrate $othbootargs; " \
805 "run norloadworking; " \
806 "bootm $kerneladdr - $dtbaddr\0" \
807 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
808 "setenv cramfsaddr $nor_recoveryaddr; " \
809 "cramfsload $dtbaddr $dtbfile; " \
810 "cramfsload $kerneladdr $kernelfile\0" \
811 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
812 "setenv cramfsaddr $nor_workingaddr; " \
813 "cramfsload $dtbaddr $dtbfile; " \
814 "cramfsload $kerneladdr $kernelfile\0" \
815 "othbootargs=quiet\0" \
816 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
817 " console=$consoledev,$baudrate $othbootargs; " \
818 "tftp $rootfsaddr $rootfsfile; " \
819 "tftp $loadaddr $kernelfile; " \
820 "tftp $dtbaddr $dtbfile; " \
821 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
822 "ramdisk_size=120000\0" \
823 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
824 "recoveryaddr=0x02F00000\0" \
825 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
826 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
827 "mw.l 0xffe0f008 0x00400000\0" \
828 "rootfsaddr=0x02F00000\0" \
829 "rootfsfile=rootfs.ext2.gz.uboot\0" \
830 "rootpath=/opt/nfsroot\0" \
831 "silent=1\0" \
832 "tftpflash=tftpboot $loadaddr $uboot; " \
833 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
834 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
835 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
836 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
837 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
838 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
839 "ubootaddr=0x01000000\0" \
840 "ubootfile=u-boot.bin\0" \
841 "upgrade=run flashworking\0" \
842 "workingaddr=0x02F00000\0" \
843 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
844
845 #else /* For Arcturus Modules */
846
847 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */
848 #define CONFIG_EXTRA_ENV_SETTINGS \
849 "bootcmd=run norkernel\0" \
850 "bootfile=uImage\0" \
851 "consoledev=ttyS0\0" \
852 "dtbaddr=0x00c00000\0" \
853 "dtbfile=image.dtb\0" \
854 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
855 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
856 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
857 "fileaddr=0x01000000\0" \
858 "filesize=0x00080000\0" \
859 "flashmbr=sf probe 0; " \
860 "tftp $loadaddr $mbr; " \
861 "sf erase $mbr_offset +$filesize; " \
862 "sf write $loadaddr $mbr_offset $filesize\0" \
863 "flashuboot=tftp $loadaddr $ubootfile; " \
864 "protect off $nor_ubootaddr0 +$filesize; " \
865 "erase $nor_ubootaddr0 +$filesize; " \
866 "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \
867 "protect on $nor_ubootaddr0 +$filesize; " \
868 "protect off $nor_ubootaddr1 +$filesize; " \
869 "erase $nor_ubootaddr1 +$filesize; " \
870 "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \
871 "protect on $nor_ubootaddr1 +$filesize\0 " \
872 "format0=protect off $part0base +$part0size; " \
873 "erase $part0base +$part0size\0" \
874 "format1=protect off $part1base +$part1size; " \
875 "erase $part1base +$part1size\0" \
876 "format2=protect off $part2base +$part2size; " \
877 "erase $part2base +$part2size\0" \
878 "format3=protect off $part3base +$part3size; " \
879 "erase $part3base +$part3size\0" \
880 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
881 "kerneladdr=0x01100000\0" \
882 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \
883 "kernelfile=uImage\0" \
884 "loadaddr=0x01000000\0" \
885 "mbr=uCP1020.mbr\0" \
886 "mbr_offset=0x00000000\0" \
887 "netdev=eth0\0" \
888 "nor_ubootaddr0=0xEC000000\0" \
889 "nor_ubootaddr1=0xEFF80000\0" \
890 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
891 "run norkernelload; " \
892 "bootm $kerneladdr - $dtbaddr\0" \
893 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \
894 "setenv cramfsaddr $part0base; " \
895 "cramfsload $dtbaddr $dtbfile; " \
896 "cramfsload $kerneladdr $kernelfile\0" \
897 "part0base=0xEC100000\0" \
898 "part0size=0x00700000\0" \
899 "part1base=0xEC800000\0" \
900 "part1size=0x02000000\0" \
901 "part2base=0xEE800000\0" \
902 "part2size=0x00800000\0" \
903 "part3base=0xEF000000\0" \
904 "part3size=0x00F80000\0" \
905 "partENVbase=0xEC080000\0" \
906 "partENVsize=0x00080000\0" \
907 "program0=tftp part0-000000.bin; " \
908 "protect off $part0base +$filesize; " \
909 "erase $part0base +$filesize; " \
910 "cp.b $loadaddr $part0base $filesize; " \
911 "echo Verifying...; " \
912 "cmp.b $loadaddr $part0base $filesize\0" \
913 "program1=tftp part1-000000.bin; " \
914 "protect off $part1base +$filesize; " \
915 "erase $part1base +$filesize; " \
916 "cp.b $loadaddr $part1base $filesize; " \
917 "echo Verifying...; " \
918 "cmp.b $loadaddr $part1base $filesize\0" \
919 "program2=tftp part2-000000.bin; " \
920 "protect off $part2base +$filesize; " \
921 "erase $part2base +$filesize; " \
922 "cp.b $loadaddr $part2base $filesize; " \
923 "echo Verifying...; " \
924 "cmp.b $loadaddr $part2base $filesize\0" \
925 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
926 " console=$consoledev,$baudrate $othbootargs; " \
927 "tftp $rootfsaddr $rootfsfile; " \
928 "tftp $loadaddr $kernelfile; " \
929 "tftp $dtbaddr $dtbfile; " \
930 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
931 "ramdisk_size=120000\0" \
932 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
933 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
934 "mw.l 0xffe0f008 0x00400000\0" \
935 "rootfsaddr=0x02F00000\0" \
936 "rootfsfile=rootfs.ext2.gz.uboot\0" \
937 "rootpath=/opt/nfsroot\0" \
938 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
939 "sf probe 0; sf erase 0 +$filesize; " \
940 "sf write $loadaddr 0 $filesize\0" \
941 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
942 "protect off 0xeC000000 +$filesize; " \
943 "erase 0xEC000000 +$filesize; " \
944 "cp.b $loadaddr 0xEC000000 $filesize; " \
945 "cmp.b $loadaddr 0xEC000000 $filesize; " \
946 "protect on 0xeC000000 +$filesize\0" \
947 "tftpflash=tftpboot $loadaddr $uboot; " \
948 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
949 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
950 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
951 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
952 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
953 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
954 "ubootfile=u-boot.bin\0" \
955 "upgrade=run flashuboot\0" \
956 "usb_phy_type=ulpi\0 " \
957 "boot_nfs= " \
958 "setenv bootargs root=/dev/nfs rw " \
959 "nfsroot=$serverip:$rootpath " \
960 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
961 "console=$consoledev,$baudrate $othbootargs;" \
962 "tftp $loadaddr $bootfile;" \
963 "tftp $fdtaddr $fdtfile;" \
964 "bootm $loadaddr - $fdtaddr\0" \
965 "boot_hd = " \
966 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
967 "console=$consoledev,$baudrate $othbootargs;" \
968 "usb start;" \
969 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
970 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
971 "bootm $loadaddr - $fdtaddr\0" \
972 "boot_usb_fat = " \
973 "setenv bootargs root=/dev/ram rw " \
974 "console=$consoledev,$baudrate $othbootargs " \
975 "ramdisk_size=$ramdisk_size;" \
976 "usb start;" \
977 "fatload usb 0:2 $loadaddr $bootfile;" \
978 "fatload usb 0:2 $fdtaddr $fdtfile;" \
979 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
980 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
981 "boot_usb_ext2 = " \
982 "setenv bootargs root=/dev/ram rw " \
983 "console=$consoledev,$baudrate $othbootargs " \
984 "ramdisk_size=$ramdisk_size;" \
985 "usb start;" \
986 "ext2load usb 0:4 $loadaddr $bootfile;" \
987 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
988 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
989 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
990 "boot_nor = " \
991 "setenv bootargs root=/dev/$jffs2nor rw " \
992 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
993 "bootm $norbootaddr - $norfdtaddr\0 " \
994 "boot_ram = " \
995 "setenv bootargs root=/dev/ram rw " \
996 "console=$consoledev,$baudrate $othbootargs " \
997 "ramdisk_size=$ramdisk_size;" \
998 "tftp $ramdiskaddr $ramdiskfile;" \
999 "tftp $loadaddr $bootfile;" \
1000 "tftp $fdtaddr $fdtfile;" \
1001 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
1002
1003 #endif
1004 #endif
1005
1006 #endif /* __CONFIG_H */
"Das U-Boot" Source Tree