include/configs/a3m071.h

   1 /*
   2  * Copyright 2012-2013 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * High Level Configuration Options
  12  * (easy to change)
  13  */
  14
  15 #define CONFIG_MPC5200
  16 #define CONFIG_A3M071                   /* A3M071 board */
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 #define CONFIG_SYS_TEXT_BASE    0x01000000      /* boot low for 32 MiB boards */
  20
  21 #define CONFIG_SPL_TARGET       "u-boot-img.bin"
  22
  23 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  24
  25 #define CONFIG_MISC_INIT_R
  26 #define CONFIG_SYS_LOWBOOT              /* Enable lowboot       */
  27
  28 #ifdef CONFIG_A4M2K
  29 #define CONFIG_HOSTNAME         a4m2k
  30 #else
  31 #define CONFIG_HOSTNAME         a3m071
  32 #endif
  33
  34 #define CONFIG_BOOTCOUNT_LIMIT
  35
  36 /*
  37  * Serial console configuration
  38  */
  39 #define CONFIG_PSC_CONSOLE      1           /* console is on PSC1 */
  40 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  41 #define CONFIG_SYS_BAUDRATE_TABLE               \
  42         { 9600, 19200, 38400, 57600, 115200, 230400 }
  43
  44 /*
  45  * Command line configuration.
  46  */
  47 #define CONFIG_CMD_BSP
  48 #define CONFIG_CMD_CACHE
  49 #define CONFIG_CMD_MII
  50 #define CONFIG_CMD_REGINFO
  51 #define CONFIG_CMD_DHCP
  52 #define CONFIG_BOOTP_SEND_HOSTNAME
  53 #define CONFIG_BOOTP_SERVERIP
  54 #define CONFIG_BOOTP_MAY_FAIL
  55 #define CONFIG_BOOTP_BOOTPATH
  56 #define CONFIG_BOOTP_GATEWAY
  57 #define CONFIG_BOOTP_SERVERIP
  58 #define CONFIG_NET_RETRY_COUNT 3
  59 #define CONFIG_CMD_LINK_LOCAL
  60 #define CONFIG_NETCONSOLE
  61 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  62 #define CONFIG_CMD_PING
  63 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  64 #define CONFIG_MTD_PARTITIONS   /* needed for UBI */
  65 #define CONFIG_FLASH_CFI_MTD
  66 #define MTDIDS_DEFAULT          "nor0=fc000000.flash"
  67 #define MTDPARTS_DEFAULT        "mtdparts=fc000000.flash:512k(u-boot)," \
  68                                                 "128k(env1),"   \
  69                                                 "128k(env2),"   \
  70                                                 "128k(hwinfo)," \
  71                                                 "1M(nvramsim)," \
  72                                                 "128k(dtb),"    \
  73                                                 "5M(kernel),"   \
  74                                                 "128k(sysinfo),"        \
  75                                                 "7552k(root),"  \
  76                                                 "4M(app),"      \
  77                                                 "5376k(data),"  \
  78                                                 "8M(install)"
  79
  80 #define CONFIG_LZO                      /* needed for UBI */
  81 #define CONFIG_RBTREE                   /* needed for UBI */
  82 #define CONFIG_CMD_MTDPARTS
  83 #define CONFIG_CMD_UBI
  84 #define CONFIG_CMD_UBIFS
  85
  86 /*
  87  * IPB Bus clocking configuration.
  88  */
  89 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
  90 /* define for 66MHz speed - undef for 33MHz PCI clock speed */
  91 #ifdef CONFIG_A4M2K
  92 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
  93 #else
  94 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
  95 #endif
  96
  97 /* maximum size of the flat tree (8K) */
  98 #define OF_FLAT_TREE_MAX_SIZE   8192
  99
 100 #define OF_CPU                  "PowerPC,5200@0"
 101 #define OF_SOC                  "soc5200@f0000000"
 102 #define OF_TBCLK                (bd->bi_busfreq / 4)
 103 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 104
 105 /*
 106  * NOR flash configuration
 107  */
 108 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 109 #define CONFIG_SYS_FLASH_SIZE           0x02000000
 110 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x80000)
 111
 112 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 113 #define CONFIG_SYS_MAX_FLASH_SECT       256
 114 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 115 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
 116 #define CONFIG_SYS_FLASH_LOCK_TOUT      5
 117 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    10000
 118 #define CONFIG_SYS_FLASH_PROTECTION
 119 #define CONFIG_FLASH_CFI_DRIVER
 120 #define CONFIG_SYS_FLASH_CFI
 121 #define CONFIG_SYS_FLASH_EMPTY_INFO
 122 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 123 #define CONFIG_FLASH_VERIFY
 124
 125 /*
 126  * Environment settings
 127  */
 128 #define CONFIG_ENV_IS_IN_FLASH
 129 #define CONFIG_ENV_SIZE         0x10000
 130 #define CONFIG_ENV_SECT_SIZE    0x20000
 131 #define CONFIG_ENV_OVERWRITE
 132 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 133 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 134
 135 /*
 136  * Memory map
 137  */
 138 #define CONFIG_SYS_MBAR                 0xf0000000
 139 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 140 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 141
 142 /* Use SRAM until RAM will be available */
 143 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 144 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE
 145
 146 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 147                                          GENERATED_GBL_DATA_SIZE)
 148 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 149
 150 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 151
 152 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 153 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)
 154 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 155
 156 /*
 157  * Ethernet configuration
 158  */
 159 #define CONFIG_MPC5xxx_FEC
 160 #define CONFIG_MPC5xxx_FEC_MII100
 161 #ifdef CONFIG_A4M2K
 162 #define CONFIG_PHY_ADDR                 0x01
 163 #else
 164 #define CONFIG_PHY_ADDR                 0x00
 165 #endif
 166
 167 /*
 168  * GPIO configuration
 169  */
 170
 171 /*
 172  * GPIO-config depends on failsave-level
 173  * failsave 0 means just MPX-config, no digiboard, no fpga
 174  *          1 means digiboard ok
 175  *          2 means fpga ok
 176  */
 177
 178 #ifdef CONFIG_A4M2K
 179 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1005C805
 180 #else
 181 /* for failsave-level 0 - full failsave */
 182 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1005C005
 183 /* for failsave-level 1 - only digiboard ok */
 184 #define CONFIG_SYS_GPS_PORT_CONFIG_1    0x1005C065
 185 /* for failsave-level 2 - all ok */
 186 #define CONFIG_SYS_GPS_PORT_CONFIG_2    0x1005C065
 187 #endif
 188
 189 #define CONFIG_WDOG_GPIO_PIN            GPIO_WKUP_7
 190 #if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD)
 191 #define CONFIG_HW_WATCHDOG              /* Use external HW-Watchdog     */
 192 #endif
 193
 194 /*
 195  * Configuration matrix
 196  *                        MSB                            LSB
 197  * failsave 0  0x1005C005  00010000000001011100000000000101  ( full failsave )
 198  * failsave 1  0x1005C065  00010000000001011100000001100101  ( digib.-ver ok )
 199  * failsave 2  0x1005C065  00010000000001011100000001100101  ( all ok )
 200  *                         || ||| ||  |   ||| |   |   |   |
 201  *                         || ||| ||  |   ||| |   |   |   |  bit rev name
 202  *                         ++-+++-++--+---+++-+---+---+---+-  0   31 CS1
 203  *                          +-+++-++--+---+++-+---+---+---+-  1   30 LPTZ
 204  *                            ||| ||  |   ||| |   |   |   |   2   29 ALTs
 205  *                            +++-++--+---+++-+---+---+---+-  3   28 ALTs
 206  *                             ++-++--+---+++-+---+---+---+-  4   27 CS7
 207  *                              +-++--+---+++-+---+---+---+-  5   26 CS6
 208  *                                ||  |   ||| |   |   |   |   6   25 ATA
 209  *                                ++--+---+++-+---+---+---+-  7   24 ATA
 210  *                                 +--+---+++-+---+---+---+-  8   23 IR_USB_CLK
 211  *                                    |   ||| |   |   |   |   9   22 IRDA
 212  *                                    |   ||| |   |   |   |  10   21 IRDA
 213  *                                    +---+++-+---+---+---+- 11   20 IRDA
 214  *                                        ||| |   |   |   |  12   19 Ether
 215  *                                        ||| |   |   |   |  13   18 Ether
 216  *                                        ||| |   |   |   |  14   17 Ether
 217  *                                        +++-+---+---+---+- 15   16 Ether
 218  *                                         ++-+---+---+---+- 16   15 PCI_DIS
 219  *                                          +-+---+---+---+- 17   14 USB_SE
 220  *                                            |   |   |   |  18   13 USB
 221  *                                            +---+---+---+- 19   12 USB
 222  *                                                |   |   |  20   11 PSC3
 223  *                                                |   |   |  21   10 PSC3
 224  *                                                |   |   |  22    9 PSC3
 225  *                                                +---+---+- 23    8 PSC3
 226  *                                                    |   |  24    7 -
 227  *                                                    |   |  25    6 PSC2
 228  *                                                    |   |  26    5 PSC2
 229  *                                                    +---+- 27    4 PSC2
 230  *                                                        |  28    3 -
 231  *                                                        |  29    2 PSC1
 232  *                                                        |  30    1 PSC1
 233  *                                                        +- 31    0 PSC1
 234  */
 235
 236
 237 /*
 238  * Miscellaneous configurable options
 239  */
 240 #define CONFIG_SYS_LONGHELP
 241
 242 #define CONFIG_CMDLINE_EDITING
 243
 244 #if defined(CONFIG_CMD_KGDB)
 245 #define CONFIG_SYS_CBSIZE               1024
 246 #else
 247 #define CONFIG_SYS_CBSIZE               256
 248 #endif
 249 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 250 #define CONFIG_SYS_MAXARGS              16
 251 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 252
 253 #define CONFIG_SYS_MEMTEST_START        0x00100000
 254 #define CONFIG_SYS_MEMTEST_END          0x00f00000
 255
 256 #define CONFIG_SYS_LOAD_ADDR            0x00100000
 257
 258 #define CONFIG_LOOPW
 259 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup*/
 260
 261 /*
 262  * Various low-level settings
 263  */
 264 #define CONFIG_SYS_HID0_INIT            (HID0_ICE | HID0_ICFI)
 265 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 266
 267 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 268 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 269 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 270 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 271
 272 #ifdef CONFIG_A4M2K
 273 /* external MRAM */
 274 #define CONFIG_SYS_CS1_START            0xf1000000
 275 #define CONFIG_SYS_CS1_SIZE             (512 << 10)     /* 512KiB MRAM */
 276 #endif
 277
 278 #define CONFIG_SYS_CS2_START            0xe0000000
 279 #define CONFIG_SYS_CS2_SIZE             0x00100000
 280
 281 /* FPGA slave io (512kiB / 1MiB) - see ticket #66 */
 282 #define CONFIG_SYS_CS3_START            0xE9000000
 283 #ifdef CONFIG_A4M2K
 284 #define CONFIG_SYS_CS3_SIZE             0x00100000
 285 #else
 286 #define CONFIG_SYS_CS3_SIZE             0x00080000
 287 #endif
 288 /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
 289 #define CONFIG_SYS_CS3_CFG              0x0032B900
 290
 291 #ifndef CONFIG_A4M2K
 292 /* Diagnosis Interface - see ticket #63 */
 293 #define CONFIG_SYS_CS4_START            0xEA000000
 294 #define CONFIG_SYS_CS4_SIZE             0x00000001
 295 /* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0002B900 */
 296 #define CONFIG_SYS_CS4_CFG              0x0002B900
 297 #endif
 298
 299 /* FPGA master io (64kiB / 1MiB) - see ticket #66 */
 300 #define CONFIG_SYS_CS5_START            0xE8000000
 301 #ifdef CONFIG_A4M2K
 302 #define CONFIG_SYS_CS5_SIZE             0x00100000
 303 #else
 304 #define CONFIG_SYS_CS5_SIZE             0x00010000
 305 #endif
 306 /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
 307 #define CONFIG_SYS_CS5_CFG              0x0032B900
 308
 309 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for pci_clk  = 66 MHz */
 310 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 311 #define CONFIG_SYS_CS1_CFG              0x0008FD00
 312 #define CONFIG_SYS_CS2_CFG              0x0006F90C
 313 #else   /* for pci_clk = 33 MHz */
 314 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 315 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 316 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 317 #endif
 318
 319 #define CONFIG_SYS_CS_BURST             0x00000000
 320 /* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */
 321 /* R  7  R  6  R  5  R  4  R  3  R  2  R  1  R  0  */
 322 /* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */
 323 #define CONFIG_SYS_CS_DEADCYCLE         0x33030000
 324
 325 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 326
 327 /*
 328  * Environment Configuration
 329  */
 330
 331 #define CONFIG_BOOTDELAY        3       /* -1 disables auto-boot */
 332 #undef  CONFIG_BOOTARGS
 333 #define CONFIG_ZERO_BOOTDELAY_CHECK
 334
 335 #define CONFIG_SYS_AUTOLOAD     "n"
 336
 337 #define CONFIG_PREBOOT  "echo;" \
 338         "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \
 339         "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \
 340         "echo"
 341
 342 #undef  CONFIG_BOOTARGS
 343
 344 #define CONFIG_SYS_OS_BASE      0xfc200000
 345 #define CONFIG_SYS_FDT_BASE     0xfc1e0000
 346
 347 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 348         "netdev=eth0\0"                                                 \
 349         "verify=no\0"                                                   \
 350         "loadaddr=200000\0"                                             \
 351         "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0"             \
 352         "kernel_addr_r=1000000\0"                                       \
 353         "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0"               \
 354         "fdt_addr_r=1800000\0"                                          \
 355         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 356         "fdtfile=" __stringify(CONFIG_HOSTNAME) "/"                     \
 357                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 358         "rootpath=/opt/eldk-5.2.1/powerpc/"                             \
 359                 "core-image-minimal-mtdutils-dropbear-generic\0"        \
 360         "consoledev=ttyPSC0\0"                                          \
 361         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 362                 "nfsroot=${serverip}:${rootpath}\0"                     \
 363         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 364         "mtdargs=setenv bootargs root=/dev/mtdblock8 "                  \
 365                 "rootfstype=squashfs,jffs2\0"                           \
 366         "addhost=setenv bootargs ${bootargs} "                          \
 367                 "hostname=${hostname}\0"                                \
 368         "addip=setenv bootargs ${bootargs} "                            \
 369                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 370                 ":${hostname}:${netdev}:off panic=1\0"                  \
 371         "addtty=setenv bootargs ${bootargs} "                           \
 372                 "console=${consoledev},${baudrate}\0"                   \
 373         "flash_nfs=run nfsargs addip addtty addmtd addhost;"            \
 374                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 375         "flash_mtd=run mtdargs addip addtty addmtd addhost;"            \
 376                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 377         "flash_self=run ramargs addip addtty addmtd addhost;"           \
 378                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 379         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 380                 "tftp ${fdt_addr_r} ${fdtfile};"                        \
 381                 "run nfsargs addip addtty addmtd addhost;"              \
 382                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 383         "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME)           \
 384                 "/u-boot-img.bin\0"                                     \
 385         "update=protect off fc000000 fc07ffff;"                         \
 386                 "era fc000000 fc07ffff;"                                \
 387                 "cp.b ${loadaddr} fc000000 ${filesize}\0"               \
 388         "upd=run load;run update\0"                                     \
 389         "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;"                       \
 390                 "run mtdargs addip addtty addmtd addhost;"              \
 391                 "fdt addr 1800000;fdt boardsetup;fdt chosen;"           \
 392                 "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000"   \
 393         "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;"           \
 394                 "erase fc200000 fc6fffff;"                              \
 395                 "cp.b 1000000 fc200000 ${filesize}"                     \
 396         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 397         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 398         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 399         ""
 400
 401 #define CONFIG_BOOTCOMMAND      "run flash_mtd"
 402
 403 /*
 404  * SPL related defines
 405  */
 406 #define CONFIG_SPL_FRAMEWORK
 407 #define CONFIG_SPL_BOARD_INIT
 408 #define CONFIG_SPL_NOR_SUPPORT
 409 #define CONFIG_SPL_TEXT_BASE    0xfc000000
 410 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* image.c */
 411 #define CONFIG_SPL_LIBGENERIC_SUPPORT   /* string.c */
 412 #define CONFIG_SPL_SERIAL_SUPPORT
 413
 414 /* Place BSS for SPL near end of SDRAM */
 415 #define CONFIG_SPL_BSS_START_ADDR       ((128 - 1) << 20)
 416 #define CONFIG_SPL_BSS_MAX_SIZE         (64 << 10)
 417
 418 #define CONFIG_SPL_OS_BOOT
 419 #define CONFIG_SPL_ENV_SUPPORT
 420 /* Place patched DT blob (fdt) at this address */
 421 #define CONFIG_SYS_SPL_ARGS_ADDR        0x01800000
 422
 423 /* Settings for real U-Boot to be loaded from NOR flash */
 424 #ifndef __ASSEMBLY__
 425 extern char __spl_flash_end[];
 426 #endif
 427 #define CONFIG_SYS_UBOOT_BASE           __spl_flash_end
 428 #define CONFIG_SYS_SPL_MAX_LEN          (32 << 10)
 429 #define CONFIG_SYS_UBOOT_START          0x1000100
 430
 431 #endif /* __CONFIG_H */