include/configs/atstk1002.h

   1 /*
   2  * Copyright (C) 2005-2006 Atmel Corporation
   3  *
   4  * Configuration settings for the ATSTK1002 CPU daughterboard
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <asm/arch/hardware.h>
  12
  13 #define CONFIG_AVR32
  14 #define CONFIG_AT32AP
  15 #define CONFIG_AT32AP7000
  16 #define CONFIG_ATSTK1002
  17 #define CONFIG_ATSTK1000
  18
  19 /*
  20  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  21  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  22  * PLL frequency.
  23  * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  24  */
  25 #define CONFIG_PLL
  26 #define CONFIG_SYS_POWER_MANAGER
  27 #define CONFIG_SYS_OSC0_HZ                      20000000
  28 #define CONFIG_SYS_PLL0_DIV                     1
  29 #define CONFIG_SYS_PLL0_MUL                     7
  30 #define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
  31 /*
  32  * Set the CPU running at:
  33  * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  34  */
  35 #define CONFIG_SYS_CLKDIV_CPU                   0
  36 /*
  37  * Set the HSB running at:
  38  * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  39  */
  40 #define CONFIG_SYS_CLKDIV_HSB                   1
  41 /*
  42  * Set the PBA running at:
  43  * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  44  */
  45 #define CONFIG_SYS_CLKDIV_PBA                   2
  46 /*
  47  * Set the PBB running at:
  48  * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  49  */
  50 #define CONFIG_SYS_CLKDIV_PBB                   1
  51
  52 /* Reserve VM regions for SDRAM and NOR flash */
  53 #define CONFIG_SYS_NR_VM_REGIONS                2
  54
  55 /*
  56  * The PLLOPT register controls the PLL like this:
  57  *   icp = PLLOPT<2>
  58  *   ivco = PLLOPT<1:0>
  59  *
  60  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  61  */
  62 #define CONFIG_SYS_PLL0_OPT                     0x04
  63
  64 #define CONFIG_USART_BASE               ATMEL_BASE_USART1
  65 #define CONFIG_USART_ID                 1
  66
  67 /* User serviceable stuff */
  68 #define CONFIG_DOS_PARTITION
  69
  70 #define CONFIG_CMDLINE_TAG
  71 #define CONFIG_SETUP_MEMORY_TAGS
  72 #define CONFIG_INITRD_TAG
  73
  74 #define CONFIG_STACKSIZE                (2048)
  75
  76 #define CONFIG_BAUDRATE                 115200
  77 #define CONFIG_BOOTARGS                                                 \
  78         "console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
  79
  80 #define CONFIG_BOOTCOMMAND                                              \
  81         "fsload; bootm $(fileaddr)"
  82
  83 /*
  84  * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
  85  * data on the serial line may interrupt the boot sequence.
  86  */
  87 #define CONFIG_BOOTDELAY                1
  88 #define CONFIG_AUTOBOOT
  89 #define CONFIG_AUTOBOOT_KEYED
  90 #define CONFIG_AUTOBOOT_PROMPT          \
  91         "Press SPACE to abort autoboot in %d seconds\n", bootdelay
  92 #define CONFIG_AUTOBOOT_DELAY_STR       "d"
  93 #define CONFIG_AUTOBOOT_STOP_STR        " "
  94
  95 /*
  96  * After booting the board for the first time, new ethernet addresses
  97  * should be generated and assigned to the environment variables
  98  * "ethaddr" and "eth1addr". This is normally done during production.
  99  */
 100 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 101
 102 /*
 103  * BOOTP options
 104  */
 105 #define CONFIG_BOOTP_SUBNETMASK
 106 #define CONFIG_BOOTP_GATEWAY
 107
 108
 109 /*
 110  * Command line configuration.
 111  */
 112 #include <config_cmd_default.h>
 113
 114 #define CONFIG_CMD_ASKENV
 115 #define CONFIG_CMD_DHCP
 116 #define CONFIG_CMD_EXT2
 117 #define CONFIG_CMD_FAT
 118 #define CONFIG_CMD_JFFS2
 119 #define CONFIG_CMD_MMC
 120
 121 #undef CONFIG_CMD_FPGA
 122 #undef CONFIG_CMD_SETGETDCR
 123 #undef CONFIG_CMD_SOURCE
 124 #undef CONFIG_CMD_XIMG
 125
 126 #define CONFIG_ATMEL_USART
 127 #define CONFIG_MACB
 128 #define CONFIG_PORTMUX_PIO
 129 #define CONFIG_SYS_NR_PIOS                      5
 130 #define CONFIG_SYS_HSDRAMC
 131 #define CONFIG_MMC
 132 #define CONFIG_GENERIC_ATMEL_MCI
 133 #define CONFIG_GENERIC_MMC
 134
 135 #define CONFIG_SYS_DCACHE_LINESZ                32
 136 #define CONFIG_SYS_ICACHE_LINESZ                32
 137
 138 #define CONFIG_NR_DRAM_BANKS            1
 139
 140 #define CONFIG_SYS_FLASH_CFI
 141 #define CONFIG_FLASH_CFI_DRIVER
 142
 143 #define CONFIG_SYS_FLASH_BASE                   0x00000000
 144 #define CONFIG_SYS_FLASH_SIZE                   0x800000
 145 #define CONFIG_SYS_MAX_FLASH_BANKS              1
 146 #define CONFIG_SYS_MAX_FLASH_SECT               135
 147
 148 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 149 #define CONFIG_SYS_TEXT_BASE            0x00000000
 150
 151 #define CONFIG_SYS_INTRAM_BASE                  INTERNAL_SRAM_BASE
 152 #define CONFIG_SYS_INTRAM_SIZE                  INTERNAL_SRAM_SIZE
 153 #define CONFIG_SYS_SDRAM_BASE                   EBI_SDRAM_BASE
 154
 155 #define CONFIG_ENV_IS_IN_FLASH
 156 #define CONFIG_ENV_SIZE                 65536
 157 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 158
 159 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 160
 161 #define CONFIG_SYS_MALLOC_LEN                   (256*1024)
 162 #define CONFIG_SYS_DMA_ALLOC_LEN                (16384)
 163
 164 /* Allow 4MB for the kernel run-time image */
 165 #define CONFIG_SYS_LOAD_ADDR                    (EBI_SDRAM_BASE + 0x00400000)
 166 #define CONFIG_SYS_BOOTPARAMS_LEN               (16 * 1024)
 167
 168 /* Other configuration settings that shouldn't have to change all that often */
 169 #define CONFIG_SYS_PROMPT                       "U-Boot> "
 170 #define CONFIG_SYS_CBSIZE                       256
 171 #define CONFIG_SYS_MAXARGS                      16
 172 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 173 #define CONFIG_SYS_LONGHELP
 174
 175 #define CONFIG_SYS_MEMTEST_START                EBI_SDRAM_BASE
 176 #define CONFIG_SYS_MEMTEST_END                  (CONFIG_SYS_MEMTEST_START + 0x700000)
 177 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 178
 179 #endif /* __CONFIG_H */