include/configs/lubbock.h

   1 /*
   2  * (C) Copyright 2002
   3  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
   4  *
   5  * (C) Copyright 2002
   6  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   7  * Marius Groeger <mgroeger@sysgo.de>
   8  *
   9  * Configuation settings for the LUBBOCK board.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21 #define CONFIG_CPU_PXA25X               1       /* This is an PXA250 CPU    */
  22 #define CONFIG_LUBBOCK          1       /* on an LUBBOCK Board      */
  23 #define CONFIG_LCD              1
  24 #ifdef CONFIG_LCD
  25 #define CONFIG_PXA_LCD
  26 #define CONFIG_SHARP_LM8V31
  27 #endif
  28 #define CONFIG_MMC
  29 #define CONFIG_BOARD_LATE_INIT
  30 #define CONFIG_DOS_PARTITION
  31 #define CONFIG_SYS_TEXT_BASE    0x0
  32
  33 /* we will never enable dcache, because we have to setup MMU first */
  34 #define CONFIG_SYS_DCACHE_OFF
  35
  36 /*
  37  * Size of malloc() pool
  38  */
  39 #define CONFIG_SYS_MALLOC_LEN       (CONFIG_ENV_SIZE + 128*1024)
  40
  41 /*
  42  * Hardware drivers
  43  */
  44 #define CONFIG_LAN91C96
  45 #define CONFIG_LAN91C96_BASE 0x0C000000
  46
  47 /*
  48  * select serial console configuration
  49  */
  50 #define CONFIG_PXA_SERIAL
  51 #define CONFIG_FFUART          1       /* we use FFUART on LUBBOCK */
  52 #define CONFIG_CONS_INDEX       3
  53
  54 /* allow to overwrite serial and ethaddr */
  55 #define CONFIG_ENV_OVERWRITE
  56
  57 #define CONFIG_BAUDRATE         115200
  58
  59
  60 /*
  61  * BOOTP options
  62  */
  63 #define CONFIG_BOOTP_BOOTFILESIZE
  64 #define CONFIG_BOOTP_BOOTPATH
  65 #define CONFIG_BOOTP_GATEWAY
  66 #define CONFIG_BOOTP_HOSTNAME
  67
  68
  69 /*
  70  * Command line configuration.
  71  */
  72 #include <config_cmd_default.h>
  73
  74 #define CONFIG_CMD_FAT
  75
  76
  77 #define CONFIG_BOOTDELAY        3
  78 #define CONFIG_ETHADDR          08:00:3e:26:0a:5b
  79 #define CONFIG_NETMASK          255.255.0.0
  80 #define CONFIG_IPADDR           192.168.0.21
  81 #define CONFIG_SERVERIP         192.168.0.250
  82 #define CONFIG_BOOTCOMMAND      "bootm 80000"
  83 #define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
  84 #define CONFIG_CMDLINE_TAG
  85 #define CONFIG_TIMESTAMP
  86
  87 #if defined(CONFIG_CMD_KGDB)
  88 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
  89 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
  90 #endif
  91
  92 /*
  93  * Miscellaneous configurable options
  94  */
  95 #define CONFIG_SYS_HUSH_PARSER          1
  96
  97 #define CONFIG_SYS_LONGHELP                             /* undef to save memory         */
  98 #ifdef CONFIG_SYS_HUSH_PARSER
  99 #define CONFIG_SYS_PROMPT               "$ "            /* Monitor Command Prompt */
 100 #else
 101 #endif
 102 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
 103 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 104 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
 105 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 106 #define CONFIG_SYS_DEVICE_NULLDEV       1
 107
 108 #define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on     */
 109 #define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM   */
 110
 111 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 112
 113 #define CONFIG_SYS_CPUSPEED             0x161           /* set core clock to 400/200/100 MHz */
 114
 115 #ifdef CONFIG_MMC
 116 #define CONFIG_GENERIC_MMC
 117 #define CONFIG_PXA_MMC_GENERIC
 118 #define CONFIG_CMD_MMC
 119 #define CONFIG_SYS_MMC_BASE             0xF0000000
 120 #endif
 121
 122 /*
 123  * Physical Memory Map
 124  */
 125 #define CONFIG_NR_DRAM_BANKS    4          /* we have 2 banks of DRAM */
 126 #define PHYS_SDRAM_1            0xa0000000 /* SDRAM Bank #1 */
 127 #define PHYS_SDRAM_1_SIZE       0x04000000 /* 64 MB */
 128 #define PHYS_SDRAM_2            0xa4000000 /* SDRAM Bank #2 */
 129 #define PHYS_SDRAM_2_SIZE       0x00000000 /* 0 MB */
 130 #define PHYS_SDRAM_3            0xa8000000 /* SDRAM Bank #3 */
 131 #define PHYS_SDRAM_3_SIZE       0x00000000 /* 0 MB */
 132 #define PHYS_SDRAM_4            0xac000000 /* SDRAM Bank #4 */
 133 #define PHYS_SDRAM_4_SIZE       0x00000000 /* 0 MB */
 134
 135 #define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
 136 #define PHYS_FLASH_2            0x04000000 /* Flash Bank #2 */
 137 #define PHYS_FLASH_SIZE         0x02000000 /* 32 MB */
 138 #define PHYS_FLASH_BANK_SIZE    0x02000000 /* 32 MB Banks */
 139 #define PHYS_FLASH_SECT_SIZE    0x00040000 /* 256 KB sectors (x2) */
 140
 141 #define CONFIG_SYS_DRAM_BASE            0xa0000000
 142 #define CONFIG_SYS_DRAM_SIZE            0x04000000
 143
 144 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 145
 146 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 147 #define CONFIG_SYS_INIT_SP_ADDR         0xfffff800
 148
 149 #define FPGA_REGS_BASE_PHYSICAL 0x08000000
 150
 151 /*
 152  * GPIO settings
 153  */
 154 #define CONFIG_SYS_GPSR0_VAL            0x00008000
 155 #define CONFIG_SYS_GPSR1_VAL            0x00FC0382
 156 #define CONFIG_SYS_GPSR2_VAL            0x0001FFFF
 157 #define CONFIG_SYS_GPCR0_VAL            0x00000000
 158 #define CONFIG_SYS_GPCR1_VAL            0x00000000
 159 #define CONFIG_SYS_GPCR2_VAL            0x00000000
 160 #define CONFIG_SYS_GPDR0_VAL            0x0060A800
 161 #define CONFIG_SYS_GPDR1_VAL            0x00FF0382
 162 #define CONFIG_SYS_GPDR2_VAL            0x0001C000
 163 #define CONFIG_SYS_GAFR0_L_VAL          0x98400000
 164 #define CONFIG_SYS_GAFR0_U_VAL          0x00002950
 165 #define CONFIG_SYS_GAFR1_L_VAL          0x000A9558
 166 #define CONFIG_SYS_GAFR1_U_VAL          0x0005AAAA
 167 #define CONFIG_SYS_GAFR2_L_VAL          0xA0000000
 168 #define CONFIG_SYS_GAFR2_U_VAL          0x00000002
 169
 170 #define CONFIG_SYS_PSSR_VAL             0x20
 171
 172 #define CONFIG_SYS_CCCR                 CCCR_L27|CCCR_M2|CCCR_N10
 173 #define CONFIG_SYS_CKEN                 0x0
 174
 175 /*
 176  * Memory settings
 177  */
 178 #define CONFIG_SYS_MSC0_VAL             0x23F223F2
 179 #define CONFIG_SYS_MSC1_VAL             0x3FF1A441
 180 #define CONFIG_SYS_MSC2_VAL             0x7FF97FF1
 181 #define CONFIG_SYS_MDCNFG_VAL           0x00001AC9
 182 #define CONFIG_SYS_MDREFR_VAL           0x00018018
 183 #define CONFIG_SYS_MDMRS_VAL            0x00000000
 184
 185 #define CONFIG_SYS_FLYCNFG_VAL          0x00000000
 186 #define CONFIG_SYS_SXCNFG_VAL           0x00000000
 187
 188 /*
 189  * PCMCIA and CF Interfaces
 190  */
 191 #define CONFIG_SYS_MECR_VAL             0x00000000
 192 #define CONFIG_SYS_MCMEM0_VAL           0x00010504
 193 #define CONFIG_SYS_MCMEM1_VAL           0x00010504
 194 #define CONFIG_SYS_MCATT0_VAL           0x00010504
 195 #define CONFIG_SYS_MCATT1_VAL           0x00010504
 196 #define CONFIG_SYS_MCIO0_VAL            0x00004715
 197 #define CONFIG_SYS_MCIO1_VAL            0x00004715
 198
 199 #define _LED                    0x08000010
 200 #define LED_BLANK               0x08000040
 201
 202 /*
 203  * FLASH and environment organization
 204  */
 205 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks           */
 206 #define CONFIG_SYS_MAX_FLASH_SECT       128  /* max number of sectors on one chip    */
 207
 208 /* timeout values are in ticks */
 209 #define CONFIG_SYS_FLASH_ERASE_TOUT     (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 210 #define CONFIG_SYS_FLASH_WRITE_TOUT     (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 211
 212 /* NOTE: many default partitioning schemes assume the kernel starts at the
 213  * second sector, not an environment.  You have been warned!
 214  */
 215 #define CONFIG_SYS_MONITOR_LEN          PHYS_FLASH_SECT_SIZE
 216 #define CONFIG_ENV_IS_IN_FLASH  1
 217 #define CONFIG_ENV_ADDR         (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
 218 #define CONFIG_ENV_SECT_SIZE    PHYS_FLASH_SECT_SIZE
 219 #define CONFIG_ENV_SIZE         (PHYS_FLASH_SECT_SIZE / 16)
 220
 221
 222 /*
 223  * FPGA Offsets
 224  */
 225 #define WHOAMI_OFFSET           0x00
 226 #define HEXLED_OFFSET           0x10
 227 #define BLANKLED_OFFSET         0x40
 228 #define DISCRETELED_OFFSET      0x40
 229 #define CNFG_SWITCHES_OFFSET    0x50
 230 #define USER_SWITCHES_OFFSET    0x60
 231 #define MISC_WR_OFFSET          0x80
 232 #define MISC_RD_OFFSET          0x90
 233 #define INT_MASK_OFFSET         0xC0
 234 #define INT_CLEAR_OFFSET        0xD0
 235 #define GP_OFFSET               0x100
 236
 237 #endif  /* __CONFIG_H */