include/configs/mvebu_armada-8k.h

   1 /*
   2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
   8 #define _CONFIG_MVEBU_ARMADA_8K_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  14
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16
  17 #define CONFIG_SYS_TEXT_BASE    0x00000000
  18
  19 /* additions for new ARM relocation support */
  20 #define CONFIG_SYS_SDRAM_BASE   0x00000000
  21
  22 #define CONFIG_NR_DRAM_BANKS    1
  23
  24 /* auto boot */
  25 #define CONFIG_PREBOOT
  26
  27 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, \
  28                                           115200, 230400, 460800, 921600 }
  29
  30 /*
  31  * For booting Linux, the board info and command line data
  32  * have to be in the first 8 MB of memory, since this is
  33  * the maximum mapped by the Linux kernel during initialization.
  34  */
  35 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
  36 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
  37 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
  38
  39 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
  40 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
  41                 +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
  42
  43 /*
  44  * Size of malloc() pool
  45  */
  46 #define CONFIG_SYS_MALLOC_LEN   (4 << 20) /* 4MiB for malloc() */
  47
  48 /*
  49  * Other required minimal configurations
  50  */
  51 #define CONFIG_SYS_LONGHELP
  52 #define CONFIG_AUTO_COMPLETE
  53 #define CONFIG_CMDLINE_EDITING
  54 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
  55 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  56 #define CONFIG_SYS_MEMTEST_START 0x00800000     /* 8M */
  57 #define CONFIG_SYS_MEMTEST_END  0x00ffffff      /*(_16M -1) */
  58 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
  59 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
  60
  61 #define CONFIG_SYS_ALT_MEMTEST
  62
  63 /* End of 16M scrubbed by training in bootrom */
  64 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
  65
  66 /*
  67  * SPI Flash configuration
  68  */
  69 #define CONFIG_KIRKWOOD_SPI
  70 #define CONFIG_ENV_SPI_BUS              0
  71 #define CONFIG_ENV_SPI_CS               0
  72
  73 /* SPI NOR flash default params, used by sf commands */
  74 #define CONFIG_SF_DEFAULT_SPEED         1000000
  75 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  76 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  77
  78 /* Environment in SPI NOR flash */
  79 #ifdef CONFIG_MVEBU_SPI_BOOT
  80 #define CONFIG_ENV_IS_IN_SPI_FLASH
  81 /* Environment in NAND flash */
  82 #endif
  83
  84 #define CONFIG_ENV_OFFSET               0x180000 /* as Marvell U-Boot version */
  85 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  86 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  87
  88 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  89 #define CONFIG_SYS_NAND_MAX_CHIPS       1
  90 #define CONFIG_SYS_NAND_ONFI_DETECTION
  91 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  92
  93 /*
  94  * Ethernet Driver configuration
  95  */
  96 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
  97 #define CONFIG_PHY_GIGE         /* GbE speed/duplex detect */
  98 #define CONFIG_ARP_TIMEOUT      200
  99 #define CONFIG_NET_RETRY_COUNT  50
 100
 101 /* USB 2.0 */
 102 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 103
 104 /* USB 3.0 */
 105 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
 106
 107 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
 108                                          CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
 109
 110 /* USB ethernet */
 111 #define CONFIG_USB_HOST_ETHER
 112 #define CONFIG_USB_ETHER_ASIX
 113 #define CONFIG_USB_ETHER_MCS7830
 114 #define CONFIG_USB_ETHER_RTL8152
 115 #define CONFIG_USB_ETHER_SMSC95XX
 116
 117 /*
 118  * SATA/SCSI/AHCI configuration
 119  */
 120 #define CONFIG_SCSI_AHCI
 121 #define CONFIG_SCSI_AHCI_PLAT
 122 #define CONFIG_LIBATA
 123 #define CONFIG_LBA48
 124 #define CONFIG_SYS_64BIT_LBA
 125
 126 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
 127 #define CONFIG_SYS_SCSI_MAX_LUN         1
 128 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 129                                          CONFIG_SYS_SCSI_MAX_LUN)
 130
 131 #define CONFIG_SUPPORT_VFAT
 132
 133 /*
 134  * PCI configuration
 135  */
 136 #ifdef CONFIG_PCIE_DW_MVEBU
 137 #define CONFIG_E1000
 138 #define CONFIG_CMD_PCI
 139 #endif
 140
 141 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */