include/configs/qong.h

   1 /*
   2  * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, <yanok@emcraft.com>
   3  *
   4  * Configuration settings for the Dave/DENX QongEVB-LITE board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_ARM1136                  /* This is an arm1136 CPU core */
  16 #define CONFIG_MX31                     /* in a mx31 */
  17 #define CONFIG_QONG
  18
  19 #define CONFIG_DISPLAY_CPUINFO
  20 #define CONFIG_DISPLAY_BOARDINFO
  21
  22 #define CONFIG_SYS_TEXT_BASE 0xa0000000
  23
  24 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  25 #define CONFIG_SETUP_MEMORY_TAGS
  26 #define CONFIG_INITRD_TAG
  27
  28 /*
  29  * Size of malloc() pool
  30  */
  31 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1536 * 1024)
  32
  33 /*
  34  * Hardware drivers
  35  */
  36
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE    UART1_BASE
  39
  40 #define CONFIG_MXC_GPIO
  41 #define CONFIG_HW_WATCHDOG
  42 #define CONFIG_IMX_WATCHDOG
  43
  44 #define CONFIG_MXC_SPI
  45 #define CONFIG_DEFAULT_SPI_BUS  1
  46 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
  47 #define CONFIG_RTC_MC13XXX
  48
  49 #define CONFIG_POWER
  50 #define CONFIG_POWER_SPI
  51 #define CONFIG_POWER_FSL
  52 #define CONFIG_FSL_PMIC_BUS     1
  53 #define CONFIG_FSL_PMIC_CS      0
  54 #define CONFIG_FSL_PMIC_CLK     100000
  55 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  56 #define CONFIG_FSL_PMIC_BITLEN  32
  57
  58 /* FPGA */
  59 #define CONFIG_FPGA
  60 #define CONFIG_QONG_FPGA
  61 #define CONFIG_FPGA_BASE        (CS1_BASE)
  62 #define CONFIG_FPGA_LATTICE
  63 #define CONFIG_FPGA_COUNT       1
  64
  65 #ifdef CONFIG_QONG_FPGA
  66 /* Ethernet */
  67 #define CONFIG_DNET
  68 #define CONFIG_DNET_BASE        (CS1_BASE + QONG_FPGA_PERIPH_SIZE)
  69
  70 /* Framebuffer and LCD */
  71 #define CONFIG_VIDEO
  72 #define CONFIG_CFB_CONSOLE
  73 #define CONFIG_VIDEO_MX3
  74 #define CONFIG_VIDEO_LOGO
  75 #define CONFIG_VIDEO_SW_CURSOR
  76 #define CONFIG_VGA_AS_SINGLE_DEVICE
  77 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  78 #define CONFIG_SPLASH_SCREEN
  79 #define CONFIG_CMD_BMP
  80 #define CONFIG_BMP_16BPP
  81 #define CONFIG_VIDEO_BMP_GZIP
  82 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (512 << 10)
  83
  84 /* USB */
  85 #define CONFIG_CMD_USB
  86 #ifdef CONFIG_CMD_USB
  87 #define CONFIG_USB_EHCI                 /* Enable EHCI USB support */
  88 #define CONFIG_USB_EHCI_MXC
  89 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  90 #define CONFIG_MXC_USB_PORT     2
  91 #define CONFIG_MXC_USB_PORTSC   (MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT)
  92 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
  93 #define CONFIG_EHCI_IS_TDI
  94 #define CONFIG_USB_STORAGE
  95 #define CONFIG_DOS_PARTITION
  96 #define CONFIG_SUPPORT_VFAT
  97 #define CONFIG_CMD_EXT2
  98 #define CONFIG_CMD_FAT
  99 #endif /* CONFIG_CMD_USB */
 100
 101 /*
 102  * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the
 103  * initial TFTP transfer, should the user wish one, significantly.
 104  */
 105 #define CONFIG_ARP_TIMEOUT      200UL
 106
 107 #endif /* CONFIG_QONG_FPGA */
 108
 109 #define CONFIG_CONS_INDEX       1
 110 #define CONFIG_BAUDRATE         115200
 111
 112 /***********************************************************
 113  * Command definition
 114  ***********************************************************/
 115
 116 #include <config_cmd_default.h>
 117
 118 #define CONFIG_CMD_CACHE
 119 #define CONFIG_CMD_DATE
 120 #define CONFIG_CMD_DHCP
 121 #define CONFIG_CMD_MII
 122 #define CONFIG_CMD_NAND
 123 #define CONFIG_CMD_NET
 124 #define CONFIG_CMD_PING
 125 #define CONFIG_CMD_SETEXPR
 126 #define CONFIG_CMD_SPI
 127 #define CONFIG_CMD_UNZIP
 128
 129 #define CONFIG_BOARD_LATE_INIT
 130
 131 #define CONFIG_BOOTDELAY        5
 132
 133 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
 134
 135 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 136         "netdev=eth0\0"                                                 \
 137         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 138                 "nfsroot=${serverip}:${rootpath}\0"                     \
 139         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 140         "addip=setenv bootargs ${bootargs} "                            \
 141                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 142                 ":${hostname}:${netdev}:off panic=1\0"                  \
 143         "addtty=setenv bootargs ${bootargs}"                            \
 144                 " console=ttymxc0,${baudrate}\0"                        \
 145         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 146         "addmisc=setenv bootargs ${bootargs}\0"                         \
 147         "uboot_addr=A0000000\0"                                         \
 148         "kernel_addr=A00C0000\0"                                        \
 149         "ramdisk_addr=A0300000\0"                                       \
 150         "u-boot=qong/u-boot.bin\0"                                      \
 151         "kernel_addr_r=80800000\0"                                      \
 152         "hostname=qong\0"                                               \
 153         "bootfile=qong/uImage\0"                                        \
 154         "rootpath=/opt/eldk-4.2-arm/armVFP\0"                           \
 155         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 156                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 157         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 158                 "bootm ${kernel_addr}\0"                                \
 159         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 160                 "run nfsargs addip addtty addmtd addmisc;"              \
 161                 "bootm\0"                                               \
 162         "bootcmd=run flash_self\0"                                      \
 163         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 164         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 165                 " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
 166                 " +${filesize};cp.b ${fileaddr} "                       \
 167                 __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
 168         "upd=run load update\0"                                         \
 169         "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000,"  \
 170                 "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296,"   \
 171                 "vmode:0\0"                                             \
 172
 173 /*
 174  * Miscellaneous configurable options
 175  */
 176 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 177 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 178 /* Print Buffer Size */
 179 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 180                 sizeof(CONFIG_SYS_PROMPT) + 16)
 181 #define CONFIG_SYS_MAXARGS              32      /* max number of command args */
 182 /* Boot Argument Buffer Size */
 183 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 184
 185 /* memtest works on first 255MB of RAM */
 186 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
 187 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + 0xff000000)
 188
 189 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 190
 191 #define CONFIG_CMDLINE_EDITING
 192 #define CONFIG_SYS_HUSH_PARSER                  /* Use the HUSH parser */
 193
 194 #define CONFIG_MISC_INIT_R
 195
 196 /*-----------------------------------------------------------------------
 197  * Physical Memory Map
 198  */
 199 #define CONFIG_NR_DRAM_BANKS    1
 200 #define PHYS_SDRAM_1            CSD0_BASE
 201 #define PHYS_SDRAM_1_SIZE       0x10000000      /* 256 MB */
 202
 203 /*
 204  * NAND driver
 205  */
 206
 207 #ifndef __ASSEMBLY__
 208 extern void qong_nand_plat_init(void *chip);
 209 extern int qong_nand_rdy(void *chip);
 210 #endif
 211 #define CONFIG_NAND_PLAT
 212 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 213 #define CONFIG_SYS_NAND_BASE    CS3_BASE
 214 #define NAND_PLAT_INIT() qong_nand_plat_init(nand)
 215
 216 #define QONG_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 24))
 217 #define QONG_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 23))
 218 #define QONG_NAND_WRITE(addr, cmd) \
 219         do { \
 220                 __REG8(addr) = cmd; \
 221         } while (0)
 222
 223 #define NAND_PLAT_WRITE_CMD(chip, cmd) QONG_NAND_WRITE(QONG_NAND_CLE(chip), cmd)
 224 #define NAND_PLAT_WRITE_ADR(chip, cmd) QONG_NAND_WRITE(QONG_NAND_ALE(chip), cmd)
 225 #define NAND_PLAT_DEV_READY(chip)      (qong_nand_rdy(chip))
 226
 227 /*-----------------------------------------------------------------------
 228  * FLASH and environment organization
 229  */
 230 #define CONFIG_SYS_FLASH_BASE           CS0_BASE
 231 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 232 /* max number of sectors on one chip */
 233 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 234 /* Monitor at beginning of flash */
 235 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 236 #define CONFIG_SYS_MONITOR_LEN          0x40000         /* Reserve 256KiB */
 237
 238 #define CONFIG_ENV_IS_IN_FLASH
 239 #define CONFIG_ENV_SECT_SIZE    0x20000
 240 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 241 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x80000)
 242
 243 /* Address and size of Redundant Environment Sector     */
 244 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 245 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 246
 247 /*-----------------------------------------------------------------------
 248  * CFI FLASH driver setup
 249  */
 250 /* Flash memory is CFI compliant */
 251 #define CONFIG_SYS_FLASH_CFI
 252 /* Use drivers/cfi_flash.c */
 253 #define CONFIG_FLASH_CFI_DRIVER
 254 /* Use buffered writes (~10x faster) */
 255 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 256 /* Use hardware sector protection */
 257 #define CONFIG_SYS_FLASH_PROTECTION
 258
 259 /*
 260  * Filesystem
 261  */
 262 #define CONFIG_CMD_JFFS2
 263 #define CONFIG_CMD_UBI
 264 #define CONFIG_CMD_UBIFS
 265 #define CONFIG_RBTREE
 266 #define CONFIG_MTD_PARTITIONS
 267 #define CONFIG_CMD_MTDPARTS
 268 #define CONFIG_LZO
 269 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 270 #define CONFIG_FLASH_CFI_MTD
 271 #define MTDIDS_DEFAULT          "nor0=physmap-flash.0,"         \
 272                                 "nand0=gen_nand"
 273 #define MTDPARTS_DEFAULT        \
 274         "mtdparts=physmap-flash.0:"                             \
 275                         "512k(U-Boot),128k(env1),128k(env2),"   \
 276                         "2304k(kernel),13m(ramdisk),-(user);"   \
 277                 "gen_nand:"                                     \
 278                         "128m(nand)"
 279
 280 /* additions for new relocation code, must be added to all boards */
 281 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 282 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 283 #define CONFIG_SYS_INIT_RAM_SIZE                IRAM_SIZE
 284 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 285 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
 286
 287 #define CONFIG_BOARD_EARLY_INIT_F
 288
 289 #endif /* __CONFIG_H */