include/configs/quantum.h

   1 /*
   2  * (C) Copyright 2003-2010
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  * changes for 16M board
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  * (easy to change)
  19  */
  20
  21 #undef CONFIG_MPC860
  22 #define CONFIG_MPC850           1       /* This is a MPC850 CPU         */
  23 #define CONFIG_RPXLITE          1       /* QUANTUM is the RPXlite clone */
  24 #define CONFIG_RMU              1   /* The QUNATUM is based on our RMU */
  25
  26 #define CONFIG_SYS_TEXT_BASE    0xfff00000
  27
  28 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  29 #undef  CONFIG_8xx_CONS_SMC2
  30 #undef  CONFIG_8xx_CONS_NONE
  31 #define CONFIG_BAUDRATE         9600    /* console baudrate = 9600bps   */
  32 #if 0
  33 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
  34 #else
  35 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  36 #endif
  37
  38 /* default developmenmt environment */
  39
  40 #define CONFIG_ETHADDR 00:0B:17:00:00:00
  41
  42 #define CONFIG_IPADDR  10.10.69.10
  43 #define CONFIG_SERVERIP 10.10.69.49
  44 #define CONFIG_NETMASK  255.255.255.0
  45 #define CONFIG_HOSTNAME QUANTUM
  46 #define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx"
  47
  48 #define CONFIG_BOOTARGS  "root=/dev/ram rw"
  49
  50 #define CONFIG_BOOTCOMMAND "bootm ff000000"
  51
  52 #define CONFIG_EXTRA_ENV_SETTINGS \
  53     "serial#=12345\0"           \
  54         "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"    \
  55         "ramargs=setenv bootargs root=/dev/ram rw\0" \
  56     "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0"
  57
  58 /*
  59  * Select the more full-featured memory test (Barr embedded systems)
  60  */
  61 #define CONFIG_SYS_ALT_MEMTEST
  62
  63 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  64 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  65
  66
  67 /* M48T02 Paralled access timekeeper with same interface as the M48T35A*/
  68 #define CONFIG_RTC_M48T35A 1
  69
  70 #if 0
  71 #define CONFIG_WATCHDOG 1               /* watchdog enabled             */
  72 #else
  73 #undef CONFIG_WATCHDOG
  74 #endif
  75
  76 /*  NVRAM and RTC */
  77 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000
  78 #define CONFIG_SYS_NVRAM_SIZE 2048
  79
  80
  81 /*
  82  * Command line configuration.
  83  */
  84 #include <config_cmd_default.h>
  85
  86 #define CONFIG_CMD_DATE
  87 #define CONFIG_CMD_DHCP
  88 #define CONFIG_CMD_NFS
  89 #define CONFIG_CMD_PING
  90 #define CONFIG_CMD_REGINFO
  91 #define CONFIG_CMD_SNTP
  92
  93
  94 /*
  95  * BOOTP options
  96  */
  97 #define CONFIG_BOOTP_SUBNETMASK
  98 #define CONFIG_BOOTP_GATEWAY
  99 #define CONFIG_BOOTP_HOSTNAME
 100 #define CONFIG_BOOTP_BOOTPATH
 101 #define CONFIG_BOOTP_BOOTFILESIZE
 102
 103
 104 #define CONFIG_AUTOBOOT_KEYED   /* Enable password protection */
 105 #define CONFIG_AUTOBOOT_PROMPT          \
 106         "\nEnter password - autoboot in %d sec...\n", bootdelay
 107 #define CONFIG_AUTOBOOT_DELAY_STR       "system"
 108 /*
 109  * Miscellaneous configurable options
 110  */
 111 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 112 #if defined(CONFIG_CMD_KGDB)
 113 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size      */
 114 #else
 115 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size      */
 116 #endif
 117 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 118 #define CONFIG_SYS_MAXARGS      16              /* max number of command args   */
 119 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 120
 121 #define CONFIG_SYS_MEMTEST_START        0x00040000      /* memtest works on     */
 122 #define CONFIG_SYS_MEMTEST_END          0x01f00000      /* 256K ... 15 MB in DRAM       */
 123
 124 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 125
 126 /*
 127  * Low Level Configuration Settings
 128  * (address mappings, register initial values, etc.)
 129  * You should know what you are doing if you make changes here.
 130  */
 131 /*-----------------------------------------------------------------------
 132  * Internal Memory Mapped Register
 133  */
 134 #define CONFIG_SYS_IMMR         0xFA200000
 135
 136 /*-----------------------------------------------------------------------
 137  * Definitions for initial stack pointer and data area (in DPRAM)
 138  */
 139 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 140 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 141 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 142 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 143
 144 /*-----------------------------------------------------------------------
 145  * Start addresses for the final memory configuration
 146  * (Set up by the startup code)
 147  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 148  */
 149 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 150 #define CONFIG_SYS_FLASH_BASE   0xFF000000
 151
 152 #if 1
 153     #define CONFIG_FLASH_CFI_DRIVER
 154 #else
 155     #undef CONFIG_FLASH_CFI_DRIVER
 156 #endif
 157
 158
 159 #ifdef CONFIG_FLASH_CFI_DRIVER
 160     #define CONFIG_SYS_FLASH_CFI 1
 161     #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 162     #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
 163 #endif
 164
 165 /*%%% #define CONFIG_SYS_FLASH_BASE             0xFFF00000 */
 166 #if defined(DEBUG) || defined(CONFIG_CMD_IDE)
 167 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 168 #else
 169 #define CONFIG_SYS_MONITOR_LEN          (128 << 10)     /* Reserve 128 kB for Monitor   */
 170 #endif
 171 #define CONFIG_SYS_MONITOR_BASE 0xFFF00000
 172 /*%%% #define CONFIG_SYS_MONITOR_BASE   CONFIG_SYS_FLASH_BASE */
 173 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 174
 175 /*
 176  * For booting Linux, the board info and command line data
 177  * have to be in the first 8 MB of memory, since this is
 178  * the maximum mapped by the Linux kernel during initialization.
 179  */
 180 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 181
 182 /*-----------------------------------------------------------------------
 183  * FLASH organization
 184  */
 185 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 186 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip */
 187
 188 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 189 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 190
 191 #define CONFIG_ENV_IS_IN_FLASH  1
 192 #define CONFIG_ENV_OFFSET           0x00040000  /*   Offset   of Environment Sector     absolute address 0xfff40000*/
 193 #define CONFIG_ENV_SECT_SIZE    0x40000 /* Total Size of Environment Sector     */
 194 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 195 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 196
 197 /* Address and size of Redundant Environment Sector     */
 198 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
 199 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 200
 201 /* FPGA */
 202 #define CONFIG_MISC_INIT_R
 203 #define CONFIG_SYS_FPGA_SPARTAN2
 204 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 205
 206
 207 /*-----------------------------------------------------------------------
 208  * Reset address
 209  */
 210 #define CONFIG_SYS_RESET_ADDRESS        ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
 211
 212 /*-----------------------------------------------------------------------
 213  * Cache Configuration
 214  */
 215 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 216 #if defined(CONFIG_CMD_KGDB)
 217 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 218 #endif
 219
 220 /*-----------------------------------------------------------------------
 221  * SYPCR - System Protection Control                            11-9
 222  * SYPCR can only be written once after reset!
 223  *-----------------------------------------------------------------------
 224  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 225  */
 226 #if defined(CONFIG_WATCHDOG)
 227 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 228                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 229 #else
 230 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 231 #endif
 232
 233 /*-----------------------------------------------------------------------
 234  * SIUMCR - SIU Module Configuration                            11-6
 235  *-----------------------------------------------------------------------
 236  * PCMCIA config., multi-function pin tri-state
 237  */
 238 #define CONFIG_SYS_SIUMCR       (SIUMCR_MLRC10)
 239
 240 /*-----------------------------------------------------------------------
 241  * TBSCR - Time Base Status and Control                         11-26
 242  *-----------------------------------------------------------------------
 243  * Clear Reference Interrupt Status, Timebase freezing enabled
 244  */
 245 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
 246
 247 /*-----------------------------------------------------------------------
 248  * RTCSC - Real-Time Clock Status and Control Register          11-27
 249  *-----------------------------------------------------------------------
 250  */
 251 /*%%%#define CONFIG_SYS_RTCSC   (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
 252 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_RTE)
 253
 254 /*-----------------------------------------------------------------------
 255  * PISCR - Periodic Interrupt Status and Control                11-31
 256  *-----------------------------------------------------------------------
 257  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 258  */
 259 #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
 260
 261 /*-----------------------------------------------------------------------
 262  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 263  *-----------------------------------------------------------------------
 264  * Reset PLL lock status sticky bit, timer expired status bit and timer
 265  * interrupt status bit
 266  *
 267  * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 268  */
 269 /* up to 50 MHz we use a 1:1 clock */
 270 #define CONFIG_SYS_PLPRCR       ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
 271
 272 /*-----------------------------------------------------------------------
 273  * SCCR - System Clock and reset Control Register               15-27
 274  *-----------------------------------------------------------------------
 275  * Set clock output, timebase and RTC source and divider,
 276  * power management and some other internal clocks
 277  */
 278 #define SCCR_MASK       SCCR_EBDF00
 279 /* up to 50 MHz we use a 1:1 clock */
 280 #define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS)
 281
 282 /*-----------------------------------------------------------------------
 283  * PCMCIA stuff
 284  *-----------------------------------------------------------------------
 285  *
 286  */
 287 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 288 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 289 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 290 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 291 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 292 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 293 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 294 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 295
 296 /*-----------------------------------------------------------------------
 297  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 298  *-----------------------------------------------------------------------
 299  */
 300
 301 #define CONFIG_IDE_PREINIT      1       /* Use preinit IDE hook */
 302 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 303
 304 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 305 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 306 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 307
 308 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 309 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 310
 311 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 312
 313 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 314
 315 /* Offset for data I/O                  */
 316 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 317
 318 /* Offset for normal register accesses  */
 319 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 320
 321 /* Offset for alternate registers       */
 322 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 323
 324 /*-----------------------------------------------------------------------
 325  *
 326  *-----------------------------------------------------------------------
 327  *
 328  */
 329 /*#define       CONFIG_SYS_DER 0x2002000F*/
 330 #define CONFIG_SYS_DER 0
 331
 332 /*
 333  * Init Memory Controller:
 334  *
 335  * BR0 and OR0 (FLASH)
 336  */
 337
 338 #define FLASH_BASE_PRELIM       0xFE000000      /* FLASH base */
 339 #define CONFIG_SYS_PRELIM_OR_AM 0xFE000000      /* OR addr mask */
 340
 341 /* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
 342 #define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
 343
 344 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 345 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
 346
 347 /*
 348  * BR1 and OR1 (SDRAM)
 349  *
 350  */
 351 #define SDRAM_BASE_PRELIM       0x00000000      /* SDRAM base   */
 352 #define SDRAM_MAX_SIZE          0x08000000      /* max 128 MB */
 353
 354 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 355 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000E00
 356
 357 #define CONFIG_SYS_OR1_PRELIM   (0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */
 358 #define CONFIG_SYS_BR1_PRELIM   ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 359
 360 /* RPXLITE mem setting */
 361 #define CONFIG_SYS_BR3_PRELIM   0xFA400001              /* FPGA */
 362 #define CONFIG_SYS_OR3_PRELIM   0xFFFF8910
 363
 364 #define CONFIG_SYS_BR4_PRELIM   0xFA000401              /* NVRAM&SRAM */
 365 #define CONFIG_SYS_OR4_PRELIM   0xFFFE0970
 366
 367 /*
 368  * Memory Periodic Timer Prescaler
 369  */
 370
 371 /* periodic timer for refresh */
 372 #define CONFIG_SYS_MAMR_PTA     20
 373
 374 /*
 375  * Refresh clock Prescalar
 376  */
 377 #define CONFIG_SYS_MPTPR        MPTPR_PTP_DIV2
 378
 379 /*
 380  * MAMR settings for SDRAM
 381  */
 382
 383 /* 9 column SDRAM */
 384 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 385                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 386                          MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
 387
 388 /*
 389  * BCSRx
 390  *
 391  * Board Status and Control Registers
 392  *
 393  */
 394
 395 #define BCSR0 0xFA400000
 396 #define BCSR1 0xFA400001
 397 #define BCSR2 0xFA400002
 398 #define BCSR3 0xFA400003
 399
 400 #define BCSR0_ENMONXCVR 0x01    /* Monitor XVCR Control */
 401 #define BCSR0_ENNVRAM   0x02    /* CS4# Control */
 402 #define BCSR0_LED5      0x04    /* LED5 control 0='on' 1='off' */
 403 #define BCSR0_LED4      0x08    /* LED4 control 0='on' 1='off' */
 404 #define BCSR0_FULLDPLX  0x10    /* Ethernet XCVR Control */
 405 #define BCSR0_COLTEST   0x20
 406 #define BCSR0_ETHLPBK   0x40
 407 #define BCSR0_ETHEN     0x80
 408
 409 #define BCSR1_PCVCTL7   0x01    /* PC Slot B Control */
 410 #define BCSR1_PCVCTL6   0x02
 411 #define BCSR1_PCVCTL5   0x04
 412 #define BCSR1_PCVCTL4   0x08
 413 #define BCSR1_IPB5SEL   0x10
 414
 415 #define BCSR2_ENPA5HDR  0x08    /* USB Control */
 416 #define BCSR2_ENUSBCLK  0x10
 417 #define BCSR2_USBPWREN  0x20
 418 #define BCSR2_USBSPD    0x40
 419 #define BCSR2_USBSUSP   0x80
 420
 421 #define BCSR3_BWRTC     0x01    /* Real Time Clock Battery */
 422 #define BCSR3_BWNVR     0x02    /* NVRAM Battery */
 423 #define BCSR3_RDY_BSY   0x04    /* Flash Operation */
 424 #define BCSR3_RPXL      0x08    /* Reserved (reads back '1') */
 425 #define BCSR3_D27       0x10    /* Dip Switch settings */
 426 #define BCSR3_D26       0x20
 427 #define BCSR3_D25       0x40
 428 #define BCSR3_D24       0x80
 429
 430 #endif  /* __CONFIG_H */