]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/tb0229.h
config: remove platform CONFIG_SYS_HZ definition part 2/2
[people/ms/u-boot.git] / include / configs / tb0229.h
1 /*
2 * (C) Copyright 2003
3 * Masami Komiya <mkomiya@sonare.it>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 /*
9 * Config header file for TANBAC TB0229 board using an VR4131 CPU module
10 */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 #define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */
16 #define CONFIG_TB0229 1 /* on a TB0229 Board */
17
18 #ifndef CPU_CLOCK_RATE
19 #define CPU_CLOCK_RATE 200000000 /* 200 MHz clock for the MIPS core */
20 #endif
21 #define CPU_TCLOCK_RATE 16588800 /* 16.5888 MHz for TClock */
22
23 #define CONFIG_CONS_INDEX 1
24 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
25
26 #define CONFIG_BAUDRATE 115200
27
28 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
29
30 #define CONFIG_PREBOOT "echo;" \
31 "echo Type \\\"boot\\\" for the network boot using DHCP, TFTP and NFS;" \
32 "echo Type \\\"run netboot_initrd\\\" for the network boot with initrd;" \
33 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
34 "echo Type \\\"run flash_local\\\" to mount local root filesystem;" \
35 "echo"
36
37 #undef CONFIG_BOOTARGS
38
39 #define CONFIG_EXTRA_ENV_SETTINGS \
40 "netboot=dhcp;tftp;run netargs; bootm\0" \
41 "nfsargs=setenv bootargs root=/dev/nfs ip=dhcp\0" \
42 "localargs=setenv bootargs root=1F02 ip=dhcp\0" \
43 "addmisc=setenv bootargs ${bootargs} " \
44 "console=ttyS0,${baudrate} " \
45 "read-only=readonly\0" \
46 "netargs=run nfsargs addmisc\0" \
47 "flash_nfs=run nfsargs addmisc;" \
48 "bootm ${kernel_addr}\0" \
49 "flash_local=run localargs addmisc;" \
50 "bootm ${kernel_addr}\0" \
51 "netboot_initrd=dhcp;tftp;tftp 80600000 initrd;" \
52 "setenv bootargs root=/dev/ram ramdisk_size=8192 ip=dhcp;"\
53 "run addmisc;" \
54 "bootm 80400000 80600000\0" \
55 "rootpath=/export/miniroot-mipsel\0" \
56 "autoload=no\0" \
57 "kernel_addr=BFC60000\0" \
58 "ramdisk_addr=B0100000\0" \
59 "u-boot=u-boot.bin\0" \
60 "bootfile=uImage\0" \
61 "load=dhcp;tftp 80400000 ${u-boot}\0" \
62 "load_kernel=dhcp;tftp 80400000 ${bootfile}\0" \
63 "update_uboot=run load;" \
64 "protect off BFC00000 BFC3FFFF;" \
65 "erase BFC00000 BFC3FFFF;" \
66 "cp.b 80400000 BFC00000 ${filesize}\0" \
67 "update_kernel=run load_kernel;" \
68 "erase BFC60000 BFD5FFFF;" \
69 "cp.b 80400000 BFC60000 ${filesize}\0" \
70 "initenv=erase bfc40000 bfc5ffff\0" \
71 ""
72 /*#define CONFIG_BOOTCOMMAND "run flash_local" */
73 #define CONFIG_BOOTCOMMAND "run netboot"
74
75
76 /*
77 * BOOTP options
78 */
79 #define CONFIG_BOOTP_BOOTFILESIZE
80 #define CONFIG_BOOTP_BOOTPATH
81 #define CONFIG_BOOTP_GATEWAY
82 #define CONFIG_BOOTP_HOSTNAME
83
84
85 /*
86 * Command line configuration.
87 */
88 #include <config_cmd_default.h>
89
90 #define CONFIG_CMD_ASKENV
91 #define CONFIG_CMD_DHCP
92 #define CONFIG_CMD_PING
93 #define CONFIG_CMD_PCI
94 #define CONFIG_CMD_ELF
95
96
97 /*
98 * Miscellaneous configurable options
99 */
100 #define CONFIG_SYS_LONGHELP /* undef to save memory */
101 #define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */
102 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
103 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
104 #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
105
106 #define CONFIG_SYS_MALLOC_LEN 128*1024
107
108 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
109
110 #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4)
111
112 #define CONFIG_SYS_SDRAM_BASE 0x80000000
113
114 #define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
115
116 #define CONFIG_SYS_MEMTEST_START 0x80000000
117 #define CONFIG_SYS_MEMTEST_END 0x80800000
118
119 /*-----------------------------------------------------------------------
120 * FLASH and environment organization
121 */
122 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
123 #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
124
125 #define PHYS_FLASH_1 0xbfc00000 /* Flash Bank #1 */
126
127 /* The following #defines are needed to get flash environment right */
128 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
129 #define CONFIG_SYS_MONITOR_LEN (192 << 10)
130
131 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000
132
133 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
134
135 /* timeout values are in ticks */
136 #define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
137 #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
138
139 #define CONFIG_ENV_IS_IN_FLASH 1
140
141 /* Address and size of Primary Environment Sector */
142 #define CONFIG_ENV_ADDR 0xBFC40000
143 #define CONFIG_ENV_SIZE 0x20000
144
145 #define CONFIG_SYS_DIRECT_FLASH_TFTP
146
147 #define CONFIG_NR_DRAM_BANKS 1
148
149 /*-----------------------------------------------------------------------
150 * Cache Configuration
151 */
152 #define CONFIG_SYS_DCACHE_SIZE 16384
153 #define CONFIG_SYS_ICACHE_SIZE 16384
154 #define CONFIG_SYS_CACHELINE_SIZE 16
155
156 /*-----------------------------------------------------------------------
157 * Serial Configuration
158 */
159 #define CONFIG_SYS_NS16550
160 #define CONFIG_SYS_NS16550_SERIAL
161 #define CONFIG_SYS_NS16550_REG_SIZE 1
162 #define CONFIG_SYS_NS16550_CLK 18432000
163 #define CONFIG_SYS_NS16550_COM1 0xaf000800
164
165 /*-----------------------------------------------------------------------
166 * PCI stuff
167 */
168 #define CONFIG_PCI
169 #define CONFIG_PCI_PNP
170 #define CONFIG_EEPRO100
171 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
172
173 #define CONFIG_RTL8139
174
175 #endif /* __CONFIG_H */