-e s/sa110/arm/ \
-e s/ppc64/powerpc/ \
-e s/ppc/powerpc/ \
- -e s/macppc/powerpc/)
+ -e s/macppc/powerpc/\
+ -e s/sh.*/sh/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
unexpand -a | sed -e 's/\s\s*$$//' > $@
include/license.h: tools/bin2header COPYING
- cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
+ cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################
unconfig:
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
-%: %_config
- $(MAKE)
+%_config:: unconfig
+ @$(MKCONFIG) -A $(@:_config=)
+
+##%: %_config
+## $(MAKE)
+
+#
+# Functions to generate common board directory names
+#
+lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
+ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
#========================================================================
# PowerPC
#========================================================================
-#########################################################################
-## MPC5xx Systems
-#########################################################################
-
-canmb_config: unconfig
- @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb
-
-cmi_mpc5xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi
-
-PATI_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl
-
#########################################################################
## MPC5xxx Systems
#########################################################################
-aev_config: unconfig
- @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc
-
-BC3450_config: unconfig
- @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450
-
-cm5200_config: unconfig
- @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200
-
-cpci5200_config: unconfig
- @$(MKCONFIG) -a cpci5200 powerpc mpc5xxx cpci5200 esd
-
digsy_mtc_config \
digsy_mtc_LOWBOOT_config \
digsy_mtc_RAMBOOT_config: unconfig
@mkdir -p $(obj)board/digsy_mtc
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
- }
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
@[ -z "$(findstring RAMBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
- echo "... with RAMBOOT configuration" ; \
- }
- @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc
+ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
+ @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
galaxy5200_LOWBOOT_config \
galaxy5200_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200
-
-hmi1001_config: unconfig
- @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001
+ @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200
Lite5200_config \
Lite5200_LOWBOOT_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { if [ "$(findstring DDR,$@)" ] ; \
+ if [ "$(findstring DDR,$@)" ] ; \
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
- fi ; \
- $(XECHO) "... with LOWBOOT configuration" ; \
- }
+ fi
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
- echo "... with 8 MB flash only" ; \
- $(XECHO) "... with LOWBOOT configuration" ; \
- }
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
- $(XECHO) "... DDR memory revision" ; \
- }
- @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
-
-jupiter_config: unconfig
- @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter
-
-inka4x0_config: unconfig
- @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0
-
-ipek01_config: unconfig
- @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01
+ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
lite5200b_config \
lite5200b_PM_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
- @ $(XECHO) "... DDR memory revision"
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
- { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
- $(XECHO) "... with power management (low-power mode) support" ; \
- }
+ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
- $(XECHO) "... with LOWBOOT configuration" ; \
- }
- @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
+ @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
prs200_highboot_DDR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
- @[ -n "$(findstring highboot,$@)" ] || \
- { $(XECHO) "... with lowboot configuration" ; \
- }
@[ -z "$(findstring highboot,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
- $(XECHO) "... with highboot configuration" ; \
- }
+ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
@[ -n "$(findstring _SDRAM,$@)" ] || \
- { if [ -n "$(findstring mcc200,$@)" ]; \
- then \
- $(XECHO) "... with DDR" ; \
- else \
- if [ -n "$(findstring _DDR,$@)" ];\
+ if [ -n "$(findstring prs200,$@)" ]; \
+ then \
+ if [ -z "$(findstring _DDR,$@)" ];\
then \
- $(XECHO) "... with DDR" ; \
- else \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
- $(XECHO) "... with SDRAM" ; \
fi; \
- fi; \
- }
+ fi
@[ -z "$(findstring _SDRAM,$@)" ] || \
- { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
- $(XECHO) "... with SDRAM" ; \
- }
+ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
@[ -z "$(findstring COM12,$@)" ] || \
- { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
- $(XECHO) "... with console on COM12" ; \
- }
+ echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
@[ -z "$(findstring prs200,$@)" ] || \
- { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
- }
+ echo "#define CONFIG_PRS200" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
-mecp5200_config: unconfig
- @$(MKCONFIG) mecp5200 powerpc mpc5xxx mecp5200 esd
-
-motionpro_config: unconfig
- @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro
-
-mucmc52_config: unconfig
- @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52
-
-munices_config: unconfig
- @$(MKCONFIG) munices powerpc mpc5xxx munices
-
MVBC_P_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mvbc_p
@ >$(obj)include/config.h
@[ -z "$(findstring MVBC_P,$@)" ] || \
- { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
- @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision
+ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision
MVSMR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/matrix_vision/mvsmr
- @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision
-
-o2dnt_config: unconfig
- @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt
+ @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision
pcm030_config \
pcm030_LOWBOOT_config: unconfig
@mkdir -p $(obj)include $(obj)board/phytec/pcm030
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
- }
- @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec
-
-pf5200_config: unconfig
- @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
+ @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_DDR_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
- $(XECHO) "... DDR memory revision" ; \
- }
+ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@[ -z "$(findstring ROMBOOT,$@)" ] || \
- { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
- $(XECHO) "... booting from 8-bit flash" ; \
- }
- @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520
-
-smmaco4_config: unconfig
- @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc
-
-spieval_config: unconfig
- @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc
+ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520
TB5200_B_config \
TB5200_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- $(XECHO) "... with MPC5200B processor" ; \
- }
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
MINI5200_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
@[ -n "$(findstring Rev,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
- $(XECHO) "... revision 1 board" ; \
- }
+ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
@[ -z "$(findstring Rev2_,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
- $(XECHO) "... revision 2 board" ; \
- }
+ echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
- $(XECHO) "... with lowboot configuration" ; \
- }
- @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200
+ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
+ @$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/tqc/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
- { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
- echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- $(XECHO) "... TQM5200S on Cam5200" ; \
+ { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring niosflash,$@)" ] || \
- { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
- $(XECHO) "... with NIOS flash driver" ; \
- }
+ echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h
@[ -z "$(findstring fo300,$@)" ] || \
- { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
- $(XECHO) "... TQM5200 on FO300" ; \
- }
+ echo "#define CONFIG_FO300" >>$(obj)include/config.h
@[ -z "$(findstring MiniFAP,$@)" ] || \
- { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
- $(XECHO) "... TQM5200_AC on MiniFAP" ; \
- }
+ echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
@[ -z "$(findstring STK100,$@)" ] || \
- { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
- $(XECHO) "... on a STK52XX.100 base board" ; \
- }
+ echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
@[ -z "$(findstring TQM5200_B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h
@[ -z "$(findstring TQM5200S,$@)" ] || \
- { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
+ { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
- }
+ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
-uc101_config: unconfig
- @$(MKCONFIG) uc101 powerpc mpc5xxx uc101
-
-v38b_config: unconfig
- @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b
-
#########################################################################
## MPC512x Systems
#########################################################################
-aria_config: unconfig
- @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx
-
-mecp5123_config: unconfig
- @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd
-
mpc5121ads_config \
mpc5121ads_rev2_config \
: unconfig
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale
-
-pdm360ng_config: unconfig
- @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng
+ @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
#########################################################################
## MPC8xx Systems
#########################################################################
-Adder_config \
Adder87x_config \
AdderII_config \
+AdderUSB_config \
+Adder_config \
: unconfig
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
- @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
- @$(MKCONFIG) -a Adder powerpc mpc8xx adder
-
-AdderUSB_config: unconfig
- @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder
+ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
+ @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder
ADS860_config \
FADS823_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads
-
-AMX860_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel
-
-c2mon_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon
-
-CCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens
-
-cogent_mpc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent
-
-ELPT860_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX
-
-EP88x_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x
-
-ESTEEM192E_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e
-
-ETX094_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094
-
-FLAGADM_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm
-
-xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
+ @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads
GEN860T_SC_config \
GEN860T_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _SC,$@)" ] || \
- { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
- $(XECHO) "With reduced H/W feature set (SC)..." ; \
- }
- @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t
-
-GENIETV_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv
-
-GTH_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth
-
-hermes_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes
-
-HMI10_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
-
-IAD210_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens
-
-xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
+ echo "#define CONFIG_SC" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t
ICU862_100MHz_config \
ICU862_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
- $(XECHO) "... with 100MHz system clock" ; \
- }
- @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862
-
-IP860_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860
+ echo "#define CONFIG_100MHz" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVML24_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm
+ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVMS8_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm
-
-kmsupx4_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
-
-KUP4K_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup
-
-KUP4X_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup
-
-LANTEC_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec
-
-lwmon_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon
+ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm
MBX_config \
MBX860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx
-
-mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile
-
-MHPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec
-
-xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
+ @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx
NETVIA_V2_config \
NETVIA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETVIA_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
- $(XECHO) "... Version 1" ; \
- }
+ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
- $(XECHO) "... Version 2" ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia
-
-xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
+ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia
NETPHONE_V2_config \
NETPHONE_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone
-
-xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
+ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone
NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring ISDN_,$@)" ] || \
- { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
@[ -n "$(findstring ISDN_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
- }
+ echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
@[ -z "$(findstring 6412_,$@)" ] || \
- { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
@[ -n "$(findstring 6412_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
- }
+ echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta
-
-xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
+ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta
NETTA2_V2_config \
NETTA2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETTA2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
- }
+ echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2
+ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring CP850,$@)" ] || \
- { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
- echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
- }
+ { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
+ }
@[ -z "$(findstring Rev1,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
- }
+ { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
+ }
@[ -z "$(findstring Rev2,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
- }
- @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650
-
-NX823_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823
-
-pcu_e_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens
-
-QS850_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
-
-QS823_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc
-
-QS860T_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc
-
-quantum_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum
-
-R360MPI_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi
-
-RBC823_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823
-
-RPXClassic_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic
-
-RPXlite_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite
+ { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
+ }
+ @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _64,$@)" ] || \
- { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
- $(XECHO) "... with 64MHz system clock ..."; \
- }
+ echo "#define RPXlite_64MHz" >>$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
- $(XECHO) "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
- { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
- $(XECHO) "... with ENV in NVRAM ..."; \
- }
- @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw
-
-rmu_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu
-
-RRvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision
+ echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
-SM850_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc
-
-spc1920_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920
-
SPD823TS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx
-
-stxxtc_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx
-
-svm_sc8xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx
+ @$(MKCONFIG) $@ powerpc mpc8xx spd8xx
SXNI855T_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet
-
-# EMK MPC8xx based modules
-TOP860_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk
+ @$(MKCONFIG) $@ powerpc mpc8xx sixnet
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
-xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
+xtract_8xx = $(subst _LCD,,$1)
FPS850L_config \
FPS860L_config \
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
- $(XECHO) "... with LCD display" ; \
}
- @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
+ @$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
-uc100_config : unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100
-
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37
+ @$(MKCONFIG) $@ powerpc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
#########################################################################
## PPC4xx Systems
#########################################################################
-xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
-
-acadia_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-ADCIOP_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd
-
-alpr_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive
-
-AP1000_config:unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix
-
-APC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd
-
-AR405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd
-
-ASH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd
-
-bamboo_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc
+ @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-bubinga_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc
-
-CANBT_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd
+ @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
# Arches, Canyonlands & Glacier use different U-Boot images
arches_config \
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+ @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
@mkdir -p $(obj)include
- @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
- @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
+ @echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
+ @echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
- $(XECHO) "SysClk = 25MHz" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
- $(XECHO) "SysClk = 33MHz" ; \
- }
- @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
-
-CMS700_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd
-
-CPCI2DP_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd
+ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd
-
-CPCIISER4_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd
-
-CRAYL1_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray
-
-csb272_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272
-
-csb472_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472
-
-DASA_SIM_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd
-
-dlvision_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys
-
-DP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd
-
-DU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd
-
-DU440_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd
-
-ebony_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc
-
-ERIC_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric
+ @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd
fx12mm_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
>> $(obj)board/avnet/fx12mm/config.tmp
@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
-G2000_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000
-
-gdppc440etx_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys
-
-hcu4_config: unconfig
- @mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal
-
-hcu5_config: unconfig
- @mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal
-
-HH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd
-
-HUB405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd
-
-icon_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx icon mosaixtech
-
# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
intip_config \
devconcenter_config: unconfig
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
-JSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse
-
-KAREF_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst
-
-katmai_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc
+hcu4_config \
+hcu5_config \
+mcu25_config: unconfig
+ @mkdir -p $(obj)board/netstal/common
+ @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
- @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
+ @$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-korat_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat
-
-luan_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc
-
-lwmon5_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5
-
-makalu_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc
-
-mcu25_config: unconfig
- @mkdir -p $(obj)board/netstal/common
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal
-
-METROBOX_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst
-
-MIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl
+ @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
MIP405T_config: unconfig
@mkdir -p $(obj)include
@$(XECHO) "Enable subset config for MIP405T"
@$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
-ML2_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2
-
ml507_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
> $(obj)board/xilinx/ml507/config.tmp
@echo "TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ml507/config.tmp
- @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
-
-neo_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys
-
-ocotea_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc
+ @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
OCRTC_config \
ORSG_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd
-
-p3p440_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive
-
-PCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd
-
-pcs440ep_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep
-
-PIP405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl
-
-PLU405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd
-
-PMC405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd
-
-PMC405DE_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd
-
-PMC440_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd
+ @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_HI_33_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring EVB_BA,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
- $(XECHO) "... BASIC model" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
@[ -z "$(findstring EVB_ME,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
- $(XECHO) "... MEDIUM model" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
@[ -z "$(findstring EVB_HI,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
- $(XECHO) "... HIGH-END model" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
- $(XECHO) "SysClk = 25MHz" ; \
- }
+ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
- $(XECHO) "SysClk = 33MHz" ; \
- }
- @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave
-
-quad100hd_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd
-
-redwood_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc
-
-sbc405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405
-
-sc3_config:unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3
+ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
sequoia_config \
rainier_config: unconfig
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
sequoia_ramboot_config \
rainier_ramboot_config: unconfig
@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
$(obj)board/amcc/sequoia/config.tmp
-
-taihu_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc
-
-taishan_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc
+ @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
v5fx30teval_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
> $(obj)board/avnet/v5fx30teval/config.tmp
@echo "TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
- @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
+ @$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
v5fx30teval_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
>> $(obj)board/avnet/v5fx30teval/config.tmp
@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
-VOH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd
-
-VOM405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd
-
W7OLMC_config \
W7OLMG_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o
+ @$(MKCONFIG) $@ powerpc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
- @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc
-
-WUH405_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd
+ @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc
xilinx-ppc405-generic_flash_config: unconfig
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
-XPEDITE1000_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes
-
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
-yucca_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc
-
-zeus_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus
-
-#########################################################################
-## MPC8220 Systems
-#########################################################################
-
-Alaska8220_config \
-Yukon8220_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska
-
-sorcery_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery
-
#########################################################################
## MPC824x Systems
#########################################################################
-xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
-
-A3000_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000
-barco_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco
-
-BMW_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw
+eXalion_config: unconfig
+ @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
CPC45_config \
CPC45_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45
- @cd $(obj)include ; \
+ @mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- $(XECHO) "... booting from 8-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- $(XECHO) "... booting from 64-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk;
-
-CU824_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824
-
-debris_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin
-
-eXalion_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
-
-HIDDEN_DRAGON_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon
-
-kvme080_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin
+ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+ @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45
# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
esac
@$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
-MOUSSE_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse
-
-MUSENKI_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki
-
-MVBLUE_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue
-
-OXC_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc
-
-PN62_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62
-
Sandpoint8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
+ @$(MKCONFIG) $@ powerpc mpc824x sandpoint
Sandpoint8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint
-
-sbc8240_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240
-
-utx8245_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245
+ @$(MKCONFIG) $@ powerpc mpc824x sandpoint
#########################################################################
## MPC8260 Systems
#########################################################################
-atc_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc
-
cogent_mpc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86
- @cd $(obj)include ; \
+ @mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- $(XECHO) "... booting from 8-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- $(XECHO) "... booting from 64-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk;
+ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+ @$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86
CPU87_config \
CPU87_ROMBOOT_config: unconfig
- @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87
- @cd $(obj)include ; \
+ @mkdir -p $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- $(XECHO) "... booting from 8-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
else \
- echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- $(XECHO) "... booting from 64-bit flash" ; \
+ echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
fi; \
- echo "export CONFIG_BOOT_ROM" >> config.mk;
+ echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
+ @$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87
ep8248_config \
ep8248E_config : unconfig
- @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248
-
-ep8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260
-
-ep82xxm_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm
-
-gw8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260
-
-hymod_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod
-
-IDS8247_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247
-
-IPHASE4539_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539
+ @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248
ISPAN_config \
ISPAN_REVB_config: unconfig
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan
-
-mgcoge_config : unconfig
- @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile
+ @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
- $(XECHO) "... with lowboot configuration" ; \
- }
- @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
-
-MPC8266ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
+ @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
muas3001_dev_config \
muas3001_config : unconfig
@if [ "$(findstring dev,$@)" ] ; then \
echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001
+ @$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- $(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
- $(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
- $(XECHO) "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
- @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826
+ @$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
PM828_config \
PM828_PCI_config \
@mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- $(XECHO) "... with PCI enabled" ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- $(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
- @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828
-
-ppmc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260
+ @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
- @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
- @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler
-
-RPXsuper_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper
-
-rsdproto_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto
-
-sacsng_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng
-
-sbc8260_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260
-
-SCM_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens
+ @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
+ @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler
TQM8255_AA_config \
TQM8260_AA_config \
echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
- echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
- $(XECHO) "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
- $(XECHO) "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
- $(XECHO) "... with 60x Bus Mode" ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
- $(XECHO) "... without 60x Bus Mode" ; \
fi
- @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc
-
-TQM8272_config: unconfig
- @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc
+ @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
- @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
-
-ZPC1900_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900
+ @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
#########################################################################
## Coldfire
astro_mcf5373l_config \
astro_mcf5373l_RAM_config : unconfig
- @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro
-
-M5208EVBE_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
+ @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
M52277EVB_config \
M52277EVB_spansion_config \
echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
- $(XECHO) "... with SPANSION boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
- $(XECHO) "... with ST Micro boot..." ; \
fi
- @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
+ @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5235EVB_Flash16_config \
echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
- @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
-
-M5249EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
-
-M5253DEMO_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
-
-M5253EVBE_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
+ @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
cobra5272_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
+ @$(MKCONFIG) $@ m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+ @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-EP2500_config: unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
-
-idmr_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
-
-M5271EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
-
-M5272C3_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
-
-M5275EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
-
-M5282EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
-
-M53017EVB_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+ @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
M5329AFEE_config \
M5329BFEE_config : unconfig
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+ @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
M5373EVB_config : unconfig
@case "$@" in \
if [ "$${FLASH}" = "NOR" ] ; then \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
- $(XECHO) "... with NOR boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
- $(XECHO) "... with ST Micro boot..." ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
- @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
+ @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
M54455EVB_atmel_config \
echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
- $(XECHO) "... with INTEL boot..." ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- $(XECHO) "... with ATMEL boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- $(XECHO) "... with ST Micro boot..." ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
- $(XECHO) "... with $${FREQ}Hz input clock"
- @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+ @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
M5475AFE_config \
M5475BFE_config \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+ @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485AFE_config \
M5485BFE_config \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
-
-TASREG_config : unconfig
- @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
+ @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
#########################################################################
## MPC83xx Systems
#########################################################################
-kmeter1_config: unconfig
- @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile
-
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8313erdb
@if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "...33M ..." ; \
echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "...66M..." ; \
echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
- $(XECHO) -n "...NAND..." ; \
echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
@if [ "$(findstring _NAND_,$@)" ] ; then \
echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
fi ;
+ @$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
-
-MPC8323ERDB_config: unconfig
- @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
- $(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
- $(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
-
-MPC8349EMDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale
+ @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
- @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale
+ @$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
- $(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
- $(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
+ @$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
- @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
+ @$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
-
-MPC837XERDB_config: unconfig
- @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
-
-MVBLM7_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision
+ @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349
+ @$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/sheldon/simpc8313
@if [ "$(findstring _LP_,$@)" ] ; then \
- $(XECHO) -n "...Large Page NAND..." ; \
echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SP_,$@)" ] ; then \
- $(XECHO) -n "...Small Page NAND..." ; \
echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
fi ;
- @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
-TQM834x_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc
+ @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
caddy2_config \
vme8349_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd
-
-edb9301_config \
-edb9302_config \
-edb9302a_config \
-edb9307_config \
-edb9307a_config \
-edb9312_config \
-edb9315_config \
-edb9315a_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
+ @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd
#########################################################################
## MPC85xx Systems
#########################################################################
-ATUM8548_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548
-
MPC8536DS_NAND_config \
MPC8536DS_SDCARD_config \
MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale
-
-MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
-MPC8540EVAL_66_slave_config: unconfig
+MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
- @if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) "... 33 MHz PCI" ; \
- else \
+ @if [ -z "$(findstring _33_,$@)" ] ; then \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
- $(XECHO) "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
- $(XECHO) " slave" ; \
- else \
- $(XECHO) " host" ; \
fi
- @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval
-
-MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale
+ @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
-
-MPC8544DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale
+ @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
+ @$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
-
-MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale
+ @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
MPC8569MDS_ATM_config \
MPC8569MDS_NAND_config \
MPC8569MDS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale
+ @$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale
P2020DS_36BIT_config \
P2020DS_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale
+ @$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale
P1011RDB_config \
P1011RDB_NAND_config \
P2020RDB_NAND_config \
P2020RDB_SDCARD_config \
P2020RDB_SPIFLASH_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
-
-PM854_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854
-
-PM856_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856
+ @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560
+ @$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560
sbc8548_config \
sbc8548_PCI_33_config \
sbc8548_PCI_66_config \
sbc8548_PCI_33_PCIE_config \
sbc8548_PCI_66_PCIE_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548
+ @$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
- @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560
-
-socrates_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates
-
-stxgp3_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx
+ @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560
stxssa_config \
stxssa_4M_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
- $(XECHO) "... with 4 MiB flash memory" ; \
fi
- @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx
+ @$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx
TQM8540_config \
TQM8541_config \
@mkdir -p $(obj)include
@BTYPE=$(@:_config=); \
CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
- $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
- @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc
@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
-
-XPEDITE5200_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes
-
-XPEDITE5370_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes
+ @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc
#########################################################################
## MPC86xx Systems
#########################################################################
-MPC8610HPCD_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale
-
MPC8641HPCN_36BIT_config \
MPC8641HPCN_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _36BIT_,$@)" ] ; then \
echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
- $(XECHO) "... enabling 36-bit physical addressing." ; \
fi
- @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
-
-sbc8641d_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d
-
-XPEDITE5170_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes
+ @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
#########################################################################
## 74xx/7xx Systems
#########################################################################
-AmigaOneG3SE_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI
-
-BAB7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec
-
-CPCI750_config: unconfig
- @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd
-
-DB64360_config: unconfig
- @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell
-
-DB64460_config: unconfig
- @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell
-
-ELPPC_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec
-
EVB64260_config \
EVB64260_750CX_config: unconfig
- @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260
-
-mpc7448hpc2_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale
-
-P3G4_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
+ @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
- @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive
+ @$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2
-
-ppmc7xx_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx
-
-ZUMA_config: unconfig
- @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260
+ @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2
#========================================================================
# ARM
#========================================================================
-#########################################################################
-## StrongARM Systems
-#########################################################################
-
-assabet_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
-
-dnp1110_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
-
-gcplus_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
-
-lart_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 lart
-
-shannon_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
-
-#########################################################################
-## ARM92xT Systems
-#########################################################################
-
-a320evb_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
#########################################################################
## Atmel AT91RM9200 Systems
#########################################################################
-at91rm9200dk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
-
-at91rm9200ek_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
-
-cmc_pu2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
-
CPUAT91_RAM_config \
CPUAT91_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
-
-csb637_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
-
-eb_cpux9k2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91
-
-kb9202_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
-
-m501sk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
-
-mp2usb_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+ @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
#########################################################################
## ARM926EJ-S Systems
#########################################################################
-afeb9260_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
-
-at91cap9adk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
-
at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
@mkdir -p $(obj)include
@if [ "$(findstring 9g20,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \
- $(XECHO) "... 9G20 Variant" ; \
else \
echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
fi;
- @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9xeek_nandflash_config \
at91sam9xeek_dataflash_cs0_config \
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
fi;
- @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
@mkdir -p $(obj)include
@if [ "$(findstring 9g10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
- $(XECHO) "... 9G10 Variant" ; \
else \
echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
- @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
at91sam9263ek_norflash_config \
at91sam9263ek_norflash_boot_config \
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
elif [ "$(findstring norflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NOR FLASH" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
@if [ "$(findstring norflash_boot,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... and boot from NOR FLASH" ; \
fi;
- @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
- @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
+ @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
CPU9G20_128M_config \
CPU9G20_config \
CPU9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
-
-meesc_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
-
-pm9261_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
+ @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91
at91sam9m10g45ek_nandflash_config \
at91sam9m10g45ek_dataflash_config \
@mkdir -p $(obj)include
@if [ "$(findstring 9m10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
- $(XECHO) "... 9M10G45 Variant" ; \
else \
echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
fi;
-
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in NAND FLASH" ; \
else \
echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
- $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
- @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
-
-otc570_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
-
-pm9263_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+ @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
pm9g45_config : unconfig
@mkdir -p $(obj)include
SBC35_A9G20_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
+ @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
+ @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
-da830evm_config \
-da850evm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci
-
-davinci_dvevm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
-
-davinci_schmoogie_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
-
-davinci_sffsdr_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
-
-davinci_sonata_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
-
-davinci_dm355evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
-
-davinci_dm355leopard_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
-
-davinci_dm365evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
-
-davinci_dm6467evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
-
-edminiv2_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) LaCie orion5x
-
-guruplug_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-magnesium_config \
-imx27lite_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
-
-lpd7a400_config \
-lpd7a404_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
-
-mv88f6281gtw_ge_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-mx1ads_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
-
-mx1fs2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
-
-netstar_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t netstar
-
nhk8815_config \
nhk8815_onenand_config: unconfig
@mkdir -p $(obj)include
@ > $(obj)include/config.h
@if [ "$(findstring _onenand, $@)" ] ; then \
echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
- $(XECHO) "... configured to boot from OneNand Flash"; \
- else \
- $(XECHO) "... configured to boot from Nand Flash"; \
fi
- @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
-
-omap1510inn_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
+ @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- $(XECHO) "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS_AUTO boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
-
-omap5912osk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
-
-openrd_base_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+ @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap730p2_config \
omap730p2_cs0boot_config \
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS0 boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
-
-rd6281a_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-sbc2410x_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
-
-scb9328_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
-
-sheevaplug_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
-
-smdk2400_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
-
-smdk2410_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
+ @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
spear300_config \
spear310_config \
spear320_config : unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear
+ @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
spear600_config : unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear
-
-suen3_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood
+ @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
SX1_stdout_serial_config \
SX1_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for stdout serial"; \
else \
echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- $(XECHO) "... configured for stdout usbtty"; \
fi;
- @$(MKCONFIG) SX1 arm arm925t sx1
+ @$(MKCONFIG) -n $@ SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
-xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
-
trab_config \
trab_bigram_config \
trab_bigflash_config \
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
- $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
- @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
+ @$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0
tx25_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+ @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
-VCMA9_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
+edb9301_config \
+edb9302_config \
+edb9302a_config \
+edb9307_config \
+edb9307a_config \
+edb9312_config \
+edb9315_config \
+edb9315a_config: unconfig
+ @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
#########################################################################
# ARM supplied Versatile development boards
#########################################################################
-cm4008_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
-
-cm41xx_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
-
versatile_config \
versatileab_config \
versatilepb_config : unconfig
@board/armltd/versatile/split_by_variant.sh $@
-voiceblue_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
-
-#########################################################################
-## S3C44B0 Systems
-#########################################################################
-
-B2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
-
-#########################################################################
-## ARM720T Systems
-#########################################################################
-
-armadillo_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
-
-ep7312_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
-
-impa7_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t impa7
-
-modnet50_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
-
-evb4510_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
-
-lpc2292sodimm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
-
-SMN42_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
-
-#########################################################################
-## ARM CORTEX Systems
-#########################################################################
-
-am3517_evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 am3517evm logicpd omap3
-
-devkit8000_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
-
-omap3_beagle_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
-
-omap3_overo_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
-
-omap3_evm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
-
-omap3_pandora_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
-
-omap3_sdp3430_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
-
-omap3_zoom1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
-
-omap3_zoom2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
-
-s5p_goni_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 goni samsung s5pc1xx
-
-smdkc100_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
-
#########################################################################
## XScale Systems
#########################################################################
-actux1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux1
-
-actux2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux2
-
-actux3_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux3
-
-actux4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp actux4
-
-cerf250_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa cerf250
-
-cradle_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa cradle
-
-csb226_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa csb226
-
-delta_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa delta
-
-innokom_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa innokom
-
-ixdp425_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
-
-ixdpg425_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
-
-lubbock_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa lubbock
-
-pleb2_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa pleb2
-
-logodl_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa logodl
-
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
- $(XECHO) "... on SCPU board variant" ; \
fi
- @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
-
-pxa255_idp_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
+ @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
polaris_config \
trizepsiv_config : unconfig
@if [ "$(findstring polaris,$@)" ] ; then \
echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
fi;
- @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
-
-wepep250_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa wepep250
-
-xaeniax_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
-
-xm250_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa xm250
-
-xsengine_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa xsengine
-
-zylonite_config :
- @$(MKCONFIG) $(@:_config=) arm pxa zylonite
+ @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
#########################################################################
## ARM1136 Systems
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
- @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
-
-imx31_litekit_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
+ @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
imx31_phycore_eet_config \
imx31_phycore_config : unconfig
@if [ -n "$(findstring _eet_,$@)" ]; then \
echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
-
-mx31ads_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
+ @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31
mx31pdk_config \
mx31pdk_nand_config : unconfig
echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
-
-mx51evk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51
-
-omap2420h4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
-
-qong_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
+ @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
#########################################################################
## ARM1176 Systems
@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \
else \
echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
- $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \
fi
+ @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-tnetv107x_evm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1176 tnetv107xevm ti tnetv107x
-
-#========================================================================
-# i386
-#========================================================================
-#########################################################################
-## AMD SC520 CDP
-#########################################################################
-eNET_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
-
-sc520_cdp_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
-
-sc520_spunk_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
-
-sc520_spunk_rel_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
-
#========================================================================
# MIPS
#========================================================================
## MIPS32 4Kc
#########################################################################
-xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
-
incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
- $(XECHO) "... with 100MHz system clock" ; \
- }
+ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
@[ -z "$(findstring _133MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
- $(XECHO) "... with 133MHz system clock" ; \
- }
+ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
@[ -z "$(findstring _150MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
- $(XECHO) "... with 150MHz system clock" ; \
- }
- @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
-
-tb0229_config: unconfig
- @$(MKCONFIG) $(@:_config=) mips mips tb0229
+ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a incaip mips mips incaip
vct_premium_config \
vct_premium_small_config \
vct_platinumavc_onenand_config \
vct_platinumavc_onenand_small_config: unconfig
@mkdir -p $(obj)include
- @if [ "$(findstring _premium,$@)" ] ; then \
- echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
- $(XECHO) "... on Premium board variant" ; \
- fi
- @if [ "$(findstring _platinum_,$@)" ] ; then \
- echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
- $(XECHO) "... on Platinum board variant" ; \
- fi
- @if [ "$(findstring _platinumavc,$@)" ] ; then \
- echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
- $(XECHO) "... on PlatinumAVC board variant" ; \
- fi
- @if [ "$(findstring _onenand,$@)" ] ; then \
- echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
- $(XECHO) "... on OneNAND board variant" ; \
- fi
- @if [ "$(findstring _small,$@)" ] ; then \
- echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
- $(XECHO) "... stripped down image variant" ; \
- fi
- @$(MKCONFIG) -a vct mips mips vct micronas
+ @[ -z "$(findstring _premium,$@)" ] || \
+ echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
+ @[ -z "$(findstring _platinum_,$@)" ] || \
+ echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
+ @[ -z "$(findstring _platinumavc,$@)" ] || \
+ echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
+ @[ -z "$(findstring _onenand,$@)" ] || \
+ echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
+ @[ -z "$(findstring _small,$@)" ] || \
+ echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a vct mips mips vct micronas
#########################################################################
## MIPS32 AU1X00
gth2_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
- @$(MKCONFIG) -a gth2 mips mips gth2
+ @$(MKCONFIG) -a $@ mips mips gth2
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
-#########################################################################
-## MIPS64 5Kc
-#########################################################################
-
-purple_config : unconfig
- @$(MKCONFIG) $(@:_config=) mips mips purple
-
#========================================================================
# Nios
#========================================================================
## Nios-II
#########################################################################
-EP1C20_config : unconfig
- @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera
-
-EP1S10_config : unconfig
- @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera
-
-EP1S40_config : unconfig
- @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera
-
-PK1C20_config : unconfig
- @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent
-
-PCI5441_config : unconfig
- @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
-
# nios2 generic boards
NIOS2_GENERIC = nios2-generic
$(NIOS2_GENERIC:%=%_config) : unconfig
- @$(MKCONFIG) $(@:_config=) nios2 nios2 nios2-generic altera
-
-#========================================================================
-## Microblaze
-#========================================================================
-
-microblaze-generic_config: unconfig
- @mkdir -p $(obj)include
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
+ @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera
#========================================================================
# Blackfin
#========================================================================
-# Analog Devices boards
-BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
- bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
-
-# Bluetechnix tinyboards
-BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \
- tcm-bf518 tcm-bf537
-
-# Misc third party boards
-BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04
-
-# I-SYST Micromodule
-BFIN_BOARDS += ibf-dsp561
-
-$(BFIN_BOARDS:%=%_config) : unconfig
- @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
-
bf527-ezkit-v2_config : unconfig
@$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
bf527-ezkit blackfin blackfin bf527-ezkit
-#========================================================================
-# AVR32
-#========================================================================
-
-atngw100_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
-
-atstk1002_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1003_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1004_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-atstk1006_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
-
-favr-32-ezkit_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
-
-hammerhead_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
-
-mimc200_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
-
#========================================================================
# SH3 (SuperH)
#========================================================================
rsk7203_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
+ @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas
#########################################################################
## sh3 (Renesas SuperH)
mpr2_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
+ @$(MKCONFIG) -a $@ sh sh3 mpr2
ms7720se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
+ @$(MKCONFIG) -a $@ sh sh3 ms7720se
#########################################################################
## sh4 (Renesas SuperH)
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
+ @$(MKCONFIG) -a $@ sh sh4 MigoR renesas
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
+ @$(MKCONFIG) -a $@ sh sh4 ms7750se
ms7722se_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
+ @$(MKCONFIG) -a $@ sh sh4 ms7722se
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
+ @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
+ @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
+ @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas
-xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
@mkdir -p $(obj)include
echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x8ff80000" > \
$(obj)board/renesas/sh7785lcr/config.tmp ; \
- $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
fi
- @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
+ @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
+ @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas
espt_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+ @$(MKCONFIG) -a $@ sh sh4 espt
-#========================================================================
-# SPARC
-#========================================================================
-
-#########################################################################
-## LEON3
-#########################################################################
-
-# Gaisler GR-XC3S-1500 board
-gr_xc3s_1500_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
-
-# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
-gr_cpci_ax2000_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
-
-# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
-# Development board Stratix II edition, FPGA Device EP2S60.
-gr_ep2s60_config: unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
-
-# Gaisler LEON3 GRSIM simulator
-grsim_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
-
-#########################################################################
-## LEON2
-#########################################################################
-
-# Gaisler LEON2 GRSIM simulator
-grsim_leon2_config : unconfig
- @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
-
-#########################################################################
#########################################################################
#########################################################################
#endif
/* PHY mask - set only those phy number bits where phy is/can be connected */
-#define EMAC_MDIO_PHY_NUM 1
+#define EMAC_MDIO_PHY_NUM CONFIG_EMAC_MDIO_PHY_NUM
#define EMAC_MDIO_PHY_MASK (1 << EMAC_MDIO_PHY_NUM)
/* Ethernet Min/Max packet size */
#define UHCHIE __REG(0x4C000068)
#define UHCHIT __REG(0x4C00006C)
-#if defined(CONFIG_CPU_MONAHANS)
-#define UP2OCR __REG(0x40600020)
-#endif
-
#define UHCHR_FSBIR (1<<0)
#define UHCHR_FHR (1<<1)
#define UHCHR_CGR (1<<2)
#define UHCHIE_HBAIE (1<<8)
#define UHCHIE_RWIE (1<<7)
+#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
+#define UP2OCR __REG(0x40600020)
+#endif
+
+#define UP2OCR_HXOE (1<<17)
+#define UP2OCR_HXS (1<<16)
+#define UP2OCR_IDON (1<<10)
+#define UP2OCR_EXSUS (1<<9)
+#define UP2OCR_EXSP (1<<8)
+#define UP2OCR_DMSTATE (1<<7)
+#define UP2OCR_VPM (1<<6)
+#define UP2OCR_DPSTATE (1<<5)
+#define UP2OCR_DPPUE (1<<4)
+#define UP2OCR_DMPDE (1<<3)
+#define UP2OCR_DPPDE (1<<2)
+#define UP2OCR_CPVPE (1<<1)
+#define UP2OCR_CPVEN (1<<0)
+
#endif
/*
#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MDREFR_ALTREFA (1 << 31) /* Exiting Alternate Bus Master Mode Refresh Control */
+#define MDREFR_ALTREFB (1 << 30) /* Entering Alternate Bus Master Mode Refresh Control */
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
#define SYSREG_MMUCR_S_OFFSET 4
#define SR_INIT (SYSREG_BIT(GM) | SYSREG_BIT(EM) | SYSREG_BIT(M0))
-#define CPUCR_INIT (SYSREG_BIT(BI) | SYSREG_BIT(BE) \
- | SYSREG_BIT(FE) | SYSREG_BIT(RE) \
- | SYSREG_BIT(IBE) | SYSREG_BIT(IEE))
+/* due to errata (unreliable branch folding) clear FE bit explicitly */
+#define CPUCR_INIT ((SYSREG_BIT(BI) | SYSREG_BIT(BE) \
+ | SYSREG_BIT(RE) | SYSREG_BIT(IBE) \
+ | SYSREG_BIT(IEE)) & ~SYSREG_BIT(FE))
/*
* To save some space, we use the same entry point for
--- /dev/null
+#include <asm-generic/unaligned.h>
static int display_banner (void)
{
printf ("\n\n%s\n\n", version_string);
- printf ("U-Boot code: %p -> %p data: %p -> %p\n",
- _text, _etext, _data, _end);
+ printf ("U-Boot code: %08lx -> %08lx data: %08lx -> %08lx\n",
+ (unsigned long)_text, (unsigned long)_etext,
+ (unsigned long)_data, (unsigned long)_end);
return 0;
}
#include <fdt_support.h>
#endif
-#ifdef CONFIG_AMIGAONEG3SE
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#include "../board/MAI/AmigaOneG3SE/memio.h"
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
cpu_t
/*
* For the 7400 the TB clock runs at 1/4 the cpu bus speed.
*/
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
+#ifndef CONFIG_SYS_BUS_CLK
+#define CONFIG_SYS_BUS_CLK gd->bus_clk
+#endif
+
unsigned long get_tbclk(void)
{
- return (gd->bus_clk / 4);
+ return CONFIG_SYS_BUS_CLK / 4;
}
-#else /* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
-unsigned long get_tbclk (void)
-{
- return CONFIG_SYS_BUS_HZ / 4;
-}
-#endif /* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
/* ------------------------------------------------------------------------- */
+
#if defined(CONFIG_WATCHDOG)
#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
void
int interrupt_init_cpu (unsigned *decrementer_count)
{
-#if defined(DEBUG) && !defined(CONFIG_AMIGAONEG3SE)
- printf("interrupt_init: GT main cause reg: %08x:%08x\n",
+ debug("interrupt_init: GT main cause reg: %08x:%08x\n",
GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER),
GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER));
- printf("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
+ debug("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER),
GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER),
GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER));
- printf("interrupt_init: ethernet mask regs: %08x %08x %08x\n",
+ debug("interrupt_init: ethernet mask regs: %08x %08x %08x\n",
GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER),
GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER),
GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
- puts("interrupt_init: setting decrementer_count\n");
-#endif
+ debug("interrupt_init: setting decrementer_count\n");
+
*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
return (0);
#include <74xx_7xx.h>
#include <asm/processor.h>
-#ifdef CONFIG_AMIGAONEG3SE
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
extern unsigned long get_board_bus_clk (void);
bne 5b
6:
mr r3, r10 /* Destination Address */
-#if defined(CONFIG_AMIGAONEG3SE) || \
- defined(CONFIG_DB64360) || \
- defined(CONFIG_DB64460) || \
+#if defined(CONFIG_DB64360) || \
+ defined(CONFIG_DB64460) || \
defined(CONFIG_CPCI750) || \
defined(CONFIG_PPMC7XX) || \
defined(CONFIG_P3Mx)
#include <kgdb.h>
#include <asm/processor.h>
-#ifdef CONFIG_AMIGAONEG3SE
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
/* THIS NEEDS CHANGING to use the board info structure.
*/
-#ifdef CONFIG_AMIGAONEG3SE
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-#else
#define END_OF_MEM 0x02000000
-#endif
/*
* Trap & Exception support
return (void *)pGD;
}
-/**
- * Set the LUT
- *
- * @index: color number
- * @r: red
- * @b: blue
- * @g: green
- */
-void video_set_lut
- (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
-{
- return;
-}
-
#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
#endif /* defined(CONFIG_MPC5xxx) */
+#if defined(CONFIG_MPC512X)
+#define CONFIG_SYS_BOOTCOUNT_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->clk.bcr)
+#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
+#endif /* defined(CONFIG_MPC512X) */
+
#if defined(CONFIG_8xx)
#define CONFIG_SYS_BOOTCOUNT_ADDR (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + \
CPM_BOOTCOUNT_ADDR)
/*
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhoro@renesas.com>
- * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008,2010 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2008,2010 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
#include <common.h>
#include <asm/processor.h>
+#include <asm/system.h>
int watchdog_init(void)
{
void reset_cpu(unsigned long ignored)
{
+ /* Address error with SR.BL=1 first. */
+ trigger_address_error();
+
while (1)
;
}
/*
+ * (C) Copyright 2010
+ * Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
* (C) Copyright 2007
* Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*
#include <common.h>
#include <asm/processor.h>
+#include <asm/system.h>
int watchdog_init(void)
{
void reset_cpu(unsigned long ignored)
{
+ /* Address error with SR.BL=1 first. */
+ trigger_address_error();
+
while (1)
;
}
#include <common.h>
#include <asm/processor.h>
+#include <asm/system.h>
#include <asm/io.h>
#define WDT_BASE WTCNT
void reset_cpu(unsigned long ignored)
{
+ /* Address error with SR.BL=1 first. */
+ trigger_address_error();
+
while (1)
;
}
* from linux kernel code.
*/
-#include <linux/irqflags.h>
+#include <asm/irqflags.h>
#include <asm/types.h>
/*
#define arch_align_stack(x) (x)
+static inline void trigger_address_error(void)
+{
+ __asm__ __volatile__ (
+ "ldc %0, sr\n\t"
+ "mov.l @%1, %0"
+ :
+ : "r" (0x10000000), "r" (0x80000001)
+ );
+}
+
#endif
* (C) Copyright 2009
* Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
- * (C) Copyright 2007-2008
+ * (C) Copyright 2007-2010
* Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* (C) Copyright 2003
#define TMU_MAX_COUNTER (~0UL)
static ulong timer_freq;
+static unsigned long last_tcnt;
+static unsigned long long overflow_ticks;
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tmu_timer_stop(0);
tmu_timer_start(0);
+ last_tcnt = 0;
+ overflow_ticks = 0;
+
return 0;
}
unsigned long long get_ticks (void)
{
- return 0 - readl(TCNT0);
+ unsigned long tcnt = 0 - readl(TCNT0);
+ unsigned long ticks;
+
+ if (last_tcnt > tcnt) { /* overflow */
+ overflow_ticks++;
+ ticks = (0xffffffff - last_tcnt) + tcnt;
+ } else {
+ ticks = tcnt;
+ }
+ last_tcnt = tcnt;
+
+ return (overflow_ticks << 32) | tcnt;
}
void __udelay (unsigned long usec)
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <netdev.h>
-#include "articiaS.h"
-#include "memio.h"
-#include "via686.h"
-
-__asm__(" .globl send_kb \n "
- "send_kb: \n "
- " lis r9, 0xfe00 \n "
- " \n "
- " li r4, 0x10 # retries \n "
- " mtctr r4 \n "
- " \n "
- "idle: \n "
- " lbz r4, 0x64(r9) \n "
- " andi. r4, r4, 0x02 \n "
- " bne idle \n "
-
- "ready: \n "
- " stb r3, 0x60(r9) \n "
- " \n "
- "check: \n "
- " lbz r4, 0x64(r9) \n "
- " andi. r4, r4, 0x01 \n "
- " beq check \n "
- " \n "
- " lbz r4, 0x60(r9) \n "
- " cmpwi r4, 0xfa \n "
- " beq done \n "
-
- " bdnz idle \n "
-
- " li r3, 0 \n "
- " blr \n "
-
- "done: \n "
- " li r3, 1 \n "
- " blr \n "
-
- ".globl test_kb \n "
- "test_kb: \n "
- " mflr r10 \n "
- " li r3, 0xed \n "
- " bl send_kb \n "
- " li r3, 0x01 \n "
- " bl send_kb \n "
- " mtlr r10 \n "
- " blr \n "
-);
-
-
-int checkboard (void)
-{
- printf ("Board: AmigaOneG3SE\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return articiaS_ram_init ();
-}
-
-
-void after_reloc (ulong dest_addr, gd_t *gd)
-{
- board_init_r (gd, dest_addr);
-}
-
-
-int misc_init_r (void)
-{
- extern pci_dev_t video_dev;
- extern void drv_video_init (void);
-
- if (video_dev != ~0)
- drv_video_init ();
-
- return (0);
-}
-
-
-void pci_init_board (void)
-{
-#ifndef CONFIG_RAMBOOT
- articiaS_pci_init ();
-#endif
-}
-
-int board_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_3COM)
- eth_3com_initialize(bis);
-#endif
- return 0;
-}
+++ /dev/null
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../menu)
-$(shell mkdir -p $(obj)../bios_emulator)
-endif
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
- via686.o i8259.o ../bios_emulator/x86interface.o \
- ../bios_emulator/bios.o ../bios_emulator/glue.o \
- interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \
- ../menu/cmd_menu.o cmd_boota.o nvram.o
-
-SOBJS = board_asm_init.o memio.o
-
-EMUDIR = ../bios_emulator/scitech/src/x86emu/
-EMUOBJ = $(EMUDIR)decode.o $(EMUDIR)ops2.o $(EMUDIR)fpu.o $(EMUDIR)prim_ops.o \
- $(EMUDIR)ops.o $(EMUDIR)sys.o
-EMUSRC = $(EMUOBJ:.o=.c)
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-EMUOBJ := $(addprefix $(obj),$(EMUOBJ))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(EMUSRC)
- make $(obj)libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
- -rm $(LIB)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(EMUOBJ)
-
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include "memio.h"
-#include "articiaS.h"
-#include "smbus.h"
-#include "via686.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef DEBUG
-
-struct dimm_bank {
- uint8 used; /* Bank is populated */
- uint32 rows; /* Number of row addresses */
- uint32 columns; /* Number of column addresses */
- uint8 registered; /* SIMM is registered */
- uint8 ecc; /* SIMM has ecc */
- uint8 burst_len; /* Supported burst lengths */
- uint32 cas_lat; /* Supported CAS latencies */
- uint32 cas_used; /* CAS to use (not set by user) */
- uint32 trcd; /* RAS to CAS latency */
- uint32 trp; /* Precharge latency */
- uint32 tclk_hi; /* SDRAM cycle time (highest CAS latency) */
- uint32 tclk_2hi; /* SDRAM second highest CAS latency */
- uint32 size; /* Size of bank in bytes */
- uint8 auto_refresh; /* Module supports auto refresh */
- uint32 refresh_time; /* Refresh time (in ns) */
-};
-
-
-/*
-** Based in part on the evb64260 code
-*/
-
-/*
- * translate ns.ns/10 coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NS10to10PS (unsigned char spd_byte)
-{
- unsigned short ns, ns10;
-
- /* isolate upper nibble */
- ns = (spd_byte >> 4) & 0x0F;
- /* isolate lower nibble */
- ns10 = (spd_byte & 0x0F);
-
- return (ns * 100 + ns10 * 10);
-}
-
-/*
- * translate ns coding of SPD timing values
- * into 10 ps unit values
- */
-static inline unsigned short NSto10PS (unsigned char spd_byte)
-{
- return (spd_byte * 100);
-}
-
-
-long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks)
-{
- int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR;
- uint32 busclock = gd->bus_clk;
- uint32 memclock = busclock;
- uint32 tmemclock = 1000000000 / (memclock / 100);
- uint32 datawidth;
-
- if (sm_get_data (rom, dimm_address) == 0) {
- /* Nothing in slot, make both banks empty */
- debug ("Slot %d: vacant\n", dimmNum);
- banks[0].used = 0;
- banks[1].used = 0;
- return 0;
- }
-
- if (rom[2] != 0x04) {
- debug ("Slot %d: No SDRAM\n", dimmNum);
- banks[0].used = 0;
- banks[1].used = 0;
- return 0;
- }
-
- /* Determine number of banks/rows */
- if (rom[5] == 1) {
- banks[0].used = 1;
- banks[1].used = 0;
- } else {
- banks[0].used = 1;
- banks[1].used = 1;
- }
-
- /* Determine number of row addresses */
- if (rom[3] & 0xf0) {
- /* Different banks sizes */
- banks[0].rows = rom[3] & 0x0f;
- banks[1].rows = (rom[3] & 0xf0) >> 4;
- } else {
- /* Equal sized banks */
- banks[0].rows = rom[3] & 0x0f;
- banks[1].rows = banks[0].rows;
- }
-
- /* Determine number of column addresses */
- if (rom[4] & 0xf0) {
- /* Different bank sizes */
- banks[0].columns = rom[4] & 0x0f;
- banks[1].columns = (rom[4] & 0xf0) >> 4;
- } else {
- banks[0].columns = rom[4] & 0x0f;
- banks[1].columns = banks[0].columns;
- }
-
- /* Check Jedec revision, and modify row/column accordingly */
- if (rom[62] > 0x10) {
- if (banks[0].rows <= 3)
- banks[0].rows += 15;
- if (banks[1].rows <= 3)
- banks[1].rows += 15;
- if (banks[0].columns <= 3)
- banks[0].columns += 15;
- if (banks[0].columns <= 3)
- banks[0].columns += 15;
- }
-
- /* Check registered/unregisterd */
- if (rom[21] & 0x12) {
- banks[0].registered = 1;
- banks[1].registered = 1;
- } else {
- banks[0].registered = 0;
- banks[1].registered = 0;
- }
-
-#ifdef CONFIG_ECC
- /* Check parity/ECC */
- banks[0].ecc = (rom[11] == 0x02);
- banks[1].ecc = (rom[11] == 0x02);
-#endif
-
- /* Find burst lengths supported */
- banks[0].burst_len = rom[16] & 0x8f;
- banks[1].burst_len = rom[16] & 0x8f;
-
- /* Find possible cas latencies */
- banks[0].cas_lat = rom[18] & 0x7F;
- banks[1].cas_lat = rom[18] & 0x7F;
-
- /* RAS/CAS latency */
- banks[0].trcd = (NSto10PS (rom[29]) + (tmemclock - 1)) / tmemclock;
- banks[1].trcd = (NSto10PS (rom[29]) + (tmemclock - 1)) / tmemclock;
-
- /* Precharge latency */
- banks[0].trp = (NSto10PS (rom[27]) + (tmemclock - 1)) / tmemclock;
- banks[1].trp = (NSto10PS (rom[27]) + (tmemclock - 1)) / tmemclock;
-
- /* highest CAS latency */
- banks[0].tclk_hi = NS10to10PS (rom[9]);
- banks[1].tclk_hi = NS10to10PS (rom[9]);
-
- /* second highest CAS latency */
- banks[0].tclk_2hi = NS10to10PS (rom[23]);
- banks[1].tclk_2hi = NS10to10PS (rom[23]);
-
- /* bank sizes */
- datawidth = rom[13] & 0x7f;
- banks[0].size =
- (1L << (banks[0].rows + banks[0].columns)) *
- /* FIXME datawidth */ 8 * rom[17];
- if (rom[13] & 0x80)
- banks[1].size = 2 * banks[0].size;
- else
- banks[1].size = (1L << (banks[1].rows + banks[1].columns)) *
- /* FIXME datawidth */ 8 * rom[17];
-
- /* Refresh */
- if (rom[12] & 0x80) {
- banks[0].auto_refresh = 1;
- banks[1].auto_refresh = 1;
- } else {
- banks[0].auto_refresh = 0;
- banks[1].auto_refresh = 0;
- }
-
- switch (rom[12] & 0x7f) {
- case 0:
- banks[0].refresh_time = (1562500 + (tmemclock - 1)) / tmemclock;
- banks[1].refresh_time = (1562500 + (tmemclock - 1)) / tmemclock;
- break;
- case 1:
- banks[0].refresh_time = (390600 + (tmemclock - 1)) / tmemclock;
- banks[1].refresh_time = (390600 + (tmemclock - 1)) / tmemclock;
- break;
- case 2:
- banks[0].refresh_time = (781200 + (tmemclock - 1)) / tmemclock;
- banks[1].refresh_time = (781200 + (tmemclock - 1)) / tmemclock;
- break;
- case 3:
- banks[0].refresh_time = (3125000 + (tmemclock - 1)) / tmemclock;
- banks[1].refresh_time = (3125000 + (tmemclock - 1)) / tmemclock;
- break;
- case 4:
- banks[0].refresh_time = (6250000 + (tmemclock - 1)) / tmemclock;
- banks[1].refresh_time = (6250000 + (tmemclock - 1)) / tmemclock;
- break;
- case 5:
- banks[0].refresh_time = (12500000 + (tmemclock - 1)) / tmemclock;
- banks[1].refresh_time = (12500000 + (tmemclock - 1)) / tmemclock;
- break;
- default:
- banks[0].refresh_time = 0x100; /* Default of Articia S */
- banks[1].refresh_time = 0x100;
- break;
- }
-
-#ifdef DEBUG
- printf ("\nInformation for SIMM bank %ld:\n", dimmNum);
- printf ("Number of banks: %ld\n", banks[0].used + banks[1].used);
- printf ("Number of row addresses: %ld\n", banks[0].rows);
- printf ("Number of coumns addresses: %ld\n", banks[0].columns);
- printf ("SIMM is %sregistered\n",
- banks[0].registered == 0 ? "not " : "");
-#ifdef CONFIG_ECC
- printf ("SIMM %s ECC\n",
- banks[0].ecc == 1 ? "supports" : "doesn't support");
-#endif
- printf ("Supported burst lenghts: %s %s %s %s %s\n",
- banks[0].burst_len & 0x08 ? "8" : " ",
- banks[0].burst_len & 0x04 ? "4" : " ",
- banks[0].burst_len & 0x02 ? "2" : " ",
- banks[0].burst_len & 0x01 ? "1" : " ",
- banks[0].burst_len & 0x80 ? "PAGE" : " ");
- printf ("Supported CAS latencies: %s %s %s\n",
- banks[0].cas_lat & 0x04 ? "CAS 3" : " ",
- banks[0].cas_lat & 0x02 ? "CAS 2" : " ",
- banks[0].cas_lat & 0x01 ? "CAS 1" : " ");
- printf ("RAS to CAS latency: %ld\n", banks[0].trcd);
- printf ("Precharge latency: %ld\n", banks[0].trp);
- printf ("SDRAM highest CAS latency: %ld\n", banks[0].tclk_hi);
- printf ("SDRAM 2nd highest CAS latency: %ld\n", banks[0].tclk_2hi);
- printf ("SDRAM data width: %ld\n", datawidth);
- printf ("Auto Refresh %ssupported\n",
- banks[0].auto_refresh ? "" : "not ");
- printf ("Refresh time: %ld clocks\n", banks[0].refresh_time);
- if (banks[0].used)
- printf ("Bank 0 size: %ld MB\n", banks[0].size / 1024 / 1024);
- if (banks[1].used)
- printf ("Bank 1 size: %ld MB\n", banks[1].size / 1024 / 1024);
-
- printf ("\n");
-#endif
-
- sm_term ();
- return 1;
-}
-
-void select_cas (struct dimm_bank *banks, uint8 fast)
-{
- if (!banks[0].used) {
- banks[0].cas_used = 0;
- banks[0].cas_used = 0;
- return;
- }
-
- if (fast) {
- /* Search for fast CAS */
- uint32 i;
- uint32 c = 0x01;
-
- for (i = 1; i < 5; i++) {
- if (banks[0].cas_lat & c) {
- banks[0].cas_used = i;
- banks[1].cas_used = i;
- debug ("Using CAS %d (fast)\n", i);
- return;
- }
- c <<= 1;
- }
-
- /* Default to CAS 3 */
- banks[0].cas_used = 3;
- banks[1].cas_used = 3;
- debug ("Using CAS 3 (fast)\n");
-
- return;
- } else {
- /* Search for slow cas */
- uint32 i;
- uint32 c = 0x08;
-
- for (i = 4; i > 1; i--) {
- if (banks[0].cas_lat & c) {
- banks[0].cas_used = i;
- banks[1].cas_used = i;
- debug ("Using CAS %d (slow)\n", i);
- return;
- }
- c >>= 1;
- }
-
- /* Default to CAS 3 */
- banks[0].cas_used = 3;
- banks[1].cas_used = 3;
- debug ("Using CAS 3 (slow)\n");
-
- return;
- }
-
- banks[0].cas_used = 3;
- banks[1].cas_used = 3;
- debug ("Using CAS 3\n");
-
- return;
-}
-
-uint32 get_reg_setting (uint32 banks, uint32 rows, uint32 columns, uint32 size)
-{
- uint32 i;
-
- struct RowColumnSize {
- uint32 banks;
- uint32 rows;
- uint32 columns;
- uint32 size;
- uint32 register_value;
- };
-
- struct RowColumnSize rcs_map[] = {
- /* Sbk Radr Cadr MB Value */
- {1, 11, 8, 8, 0x00840f00},
- {1, 11, 9, 16, 0x00925f00},
- {1, 11, 10, 32, 0x00a64f00},
- {2, 12, 8, 32, 0x00c55f00},
- {2, 12, 9, 64, 0x00d66f00},
- {2, 12, 10, 128, 0x00e77f00},
- {2, 12, 11, 256, 0x00ff8f00},
- {2, 13, 11, 512, 0x00ff9f00},
- {0, 0, 0, 0, 0x00000000}
- };
-
-
- i = 0;
-
- while (rcs_map[i].banks != 0) {
- if (rows == rcs_map[i].rows
- && columns == rcs_map[i].columns
- && (size / 1024 / 1024) == rcs_map[i].size)
- return rcs_map[i].register_value;
-
- i++;
- }
-
- return 0;
-}
-
-uint32 burst_to_len (uint32 support)
-{
- if (support & 0x80)
- return 0x7;
- else if (support & 0x8)
- return 0x3;
- else if (support & 0x4)
- return 0x2;
- else if (support & 0x2)
- return 0x1;
- else if (support & 0x1)
- return 0x0;
-
- return 0;
-}
-
-long articiaS_ram_init (void)
-{
- register uint32 i;
- register uint32 value1;
- register uint32 value2;
- uint8 rom[128];
- uint32 burst_len;
- uint32 burst_support;
- uint32 total_ram = 0;
-
- struct dimm_bank banks[4]; /* FIXME: Move to initram */
- uint32 busclock = gd->bus_clk;
- uint32 memclock = busclock;
- uint32 reg32;
- uint32 refresh_clocks;
- uint8 auto_refresh;
-
- memset (banks, 0, sizeof (struct dimm_bank) * 4);
-
- detect_sdram (rom, 0, &banks[0]);
- detect_sdram (rom, 1, &banks[2]);
-
- for (i = 0; i < 4; i++) {
- total_ram = total_ram + (banks[i].used * banks[i].size);
- }
-
- pci_write_cfg_long (0, 0, GLOBALINFO0, 0x117430c0);
- pci_write_cfg_long (0, 0, HBUSACR0, 0x1f0100b0);
- pci_write_cfg_long (0, 0, SRAM_CR, 0x00f12000); /* Note: Might also try 0x00f10000 (original: 0x00f12000) */
- pci_write_cfg_byte (0, 0, DRAM_RAS_CTL0, 0x3f);
- pci_write_cfg_byte (0, 0, DRAM_RAS_CTL1, 0x00); /* was: 0x04); */
- pci_write_cfg_word (0, 0, DRAM_ECC0, 0x2020); /* was: 0x2400); No ECC yet */
-
- /* FIXME: Move this stuff to seperate function, like setup_dimm_bank */
- if (banks[0].used) {
- value1 = get_reg_setting (banks[0].used + banks[1].used,
- banks[0].rows, banks[0].columns,
- banks[0].size);
- } else {
- value1 = 0;
- }
-
- if (banks[1].used) {
- value2 = get_reg_setting (banks[0].used + banks[1].used,
- banks[1].rows, banks[1].columns,
- banks[1].size);
- } else {
- value2 = 0;
- }
-
- pci_write_cfg_long (0, 0, DIMM0_B0_SCR0, value1);
- pci_write_cfg_long (0, 0, DIMM0_B1_SCR0, value2);
-
- debug ("DIMM0_B0_SCR0 = 0x%08x\n", value1);
- debug ("DIMM0_B1_SCR0 = 0x%08x\n", value2);
-
- if (banks[2].used) {
- value1 = get_reg_setting (banks[2].used + banks[3].used,
- banks[2].rows, banks[2].columns,
- banks[2].size);
- } else {
- value1 = 0;
- }
-
- if (banks[3].used) {
- value2 = get_reg_setting (banks[2].used + banks[3].used,
- banks[3].rows, banks[3].columns,
- banks[3].size);
- } else {
- value2 = 0;
- }
-
- pci_write_cfg_long (0, 0, DIMM1_B2_SCR0, value1);
- pci_write_cfg_long (0, 0, DIMM1_B3_SCR0, value2);
-
- debug ("DIMM0_B2_SCR0 = 0x%08x\n", value1);
- debug ("DIMM0_B3_SCR0 = 0x%08x\n", value2);
-
- pci_write_cfg_long (0, 0, DIMM2_B4_SCR0, 0);
- pci_write_cfg_long (0, 0, DIMM2_B5_SCR0, 0);
- pci_write_cfg_long (0, 0, DIMM3_B6_SCR0, 0);
- pci_write_cfg_long (0, 0, DIMM3_B7_SCR0, 0);
-
- /* Determine timing */
- select_cas (&banks[0], 0);
- select_cas (&banks[2], 0);
-
- /* FIXME: What about write recovery */
- /* Auto refresh Precharge */
-#if 0
- reg32 = (0x3 << 13) | (0x7 << 10) | ((banks[0].trp - 2) << 8) |
- /* Write recovery CAS Latency */
- (0x1 << 6) | (banks[0].cas_used << 4) |
- /* RAS/CAS latency */
- ((banks[0].trcd - 1) << 0);
-
- reg32 |= ((0x3 << 13) | (0x7 << 10) | ((banks[2].trp - 2) << 8) |
- (0x1 << 6) | (banks[2].cas_used << 4) |
- ((banks[2].trcd - 1) << 0)) << 16;
-#else
- if (100000000 == gd->bus_clk)
- reg32 = 0x71737173;
- else
- reg32 = 0x69736973;
-#endif
- pci_write_cfg_long (0, 0, DIMM0_TCR0, reg32);
- debug ("DIMM0_TCR0 = 0x%08x\n", reg32);
-
- /* Write default in DIMM2/3 (not used on A1) */
- pci_write_cfg_long (0, 0, DIMM2_TCR0, 0x7d737d73);
-
-
- /* Determine buffered/unbuffered mode for each SIMM. Uses first bank as reference (second, if present, uses the same) */
- reg32 = pci_read_cfg_long (0, 0, DRAM_GCR0);
- reg32 &= 0xFF00FFFF;
-
-#if 0
- if (banks[0].used && banks[0].registered)
- reg32 |= 0x1 << 16;
-
- if (banks[2].used && banks[2].registered)
- reg32 |= 0x1 << 18;
-#else
- if (banks[0].registered || banks[2].registered)
- reg32 |= 0x55 << 16;
-#endif
- pci_write_cfg_long (0, 0, DRAM_GCR0, reg32);
- debug ("DRAM_GCR0 = 0x%08x\n", reg32);
-
- /* Determine refresh */
- refresh_clocks = 0xffffffff;
- auto_refresh = 1;
-
- for (i = 0; i < 4; i++) {
- if (banks[i].used) {
- if (banks[i].auto_refresh == 0)
- auto_refresh = 0;
- if (banks[i].refresh_time < refresh_clocks)
- refresh_clocks = banks[i].refresh_time;
- }
- }
-
-
-#if 1
- /* It seems this is suggested by the ArticiaS data book */
- if (100000000 == gd->bus_clk)
- refresh_clocks = 1561;
- else
- refresh_clocks = 2083;
-#endif
-
-
- debug ("Refresh set to %ld clocks, auto refresh %s\n",
- refresh_clocks, auto_refresh ? "on" : "off");
-
- pci_write_cfg_long (0, 0, DRAM_REFRESH0,
- (1 << 16) | (1 << 15) | (auto_refresh << 12) |
- (refresh_clocks));
- debug ("DRAM_REFRESH0 = 0x%08x\n",
- (1 << 16) | (1 << 15) | (auto_refresh << 12) |
- (refresh_clocks));
-
-/* pci_write_cfg_long(0, 0, DRAM_REFRESH0, 0x00019400); */
-
- /* Set mode registers */
- /* FIXME: For now, set same burst len for all modules. Dunno if that's necessary */
- /* Find a common burst len */
- burst_support = 0xff;
-
- if (banks[0].used)
- burst_support = banks[0].burst_len;
- if (banks[1].used)
- burst_support = banks[1].burst_len;
- if (banks[2].used)
- burst_support = banks[2].burst_len;
- if (banks[3].used)
- burst_support = banks[3].burst_len;
-
- /*
- ** Mode register:
- ** Bits Use
- ** 0-2 Burst len
- ** 3 Burst type (0 = sequential, 1 = interleave)
- ** 4-6 CAS latency
- ** 7-8 Operation mode (0 = default, all others invalid)
- ** 9 Write burst
- ** 10-11 Reserved
- **
- ** Mode register burst table:
- ** A2 A1 A0 lenght
- ** 0 0 0 1
- ** 0 0 1 2
- ** 0 1 0 4
- ** 0 1 1 8
- ** 1 0 0 invalid
- ** 1 0 1 invalid
- ** 1 1 0 invalid
- ** 1 1 1 page (only valid for non-interleaved)
- */
-
- burst_len = burst_to_len (burst_support);
- burst_len = 2; /* FIXME */
-
- if (banks[0].used) {
- pci_write_cfg_word (0, 0, DRAM_PCR0,
- 0x8000 | burst_len | (banks[0].cas_used << 4));
- debug ("Mode bank 0: 0x%08x\n",
- 0x8000 | burst_len | (banks[0].cas_used << 4));
- } else {
- /* Seems to be needed to disable the bank */
- pci_write_cfg_word (0, 0, DRAM_PCR0, 0x0000 | 0x032);
- }
-
- if (banks[1].used) {
- pci_write_cfg_word (0, 0, DRAM_PCR0,
- 0x9000 | burst_len | (banks[1].cas_used << 4));
- debug ("Mode bank 1: 0x%08x\n",
- 0x8000 | burst_len | (banks[1].cas_used << 4));
- } else {
- /* Seems to be needed to disable the bank */
- pci_write_cfg_word (0, 0, DRAM_PCR0, 0x1000 | 0x032);
- }
-
-
- if (banks[2].used) {
- pci_write_cfg_word (0, 0, DRAM_PCR0,
- 0xa000 | burst_len | (banks[2].cas_used << 4));
- debug ("Mode bank 2: 0x%08x\n",
- 0x8000 | burst_len | (banks[2].cas_used << 4));
- } else {
- /* Seems to be needed to disable the bank */
- pci_write_cfg_word (0, 0, DRAM_PCR0, 0x2000 | 0x032);
- }
-
-
- if (banks[3].used) {
- pci_write_cfg_word (0, 0, DRAM_PCR0,
- 0xb000 | burst_len | (banks[3].cas_used << 4));
- debug ("Mode bank 3: 0x%08x\n",
- 0x8000 | burst_len | (banks[3].cas_used << 4));
- } else {
- /* Seems to be needed to disable the bank */
- pci_write_cfg_word (0, 0, DRAM_PCR0, 0x3000 | 0x032);
- }
-
-
- pci_write_cfg_word (0, 0, 0xba, 0x00);
-
- return total_ram;
-}
-
-extern int drv_isa_kbd_init (void);
-
-int last_stage_init (void)
-{
- drv_isa_kbd_init ();
- return 0;
-}
-
-int overwrite_console (void)
-{
- return (0);
-}
-
-#define in_8 read_byte
-#define out_8 write_byte
-
-static __inline__ unsigned long get_msr (void)
-{
- unsigned long msr;
-
- asm volatile ("mfmsr %0":"=r" (msr):);
-
- return msr;
-}
-
-static __inline__ void set_msr (unsigned long msr)
-{
- asm volatile ("mtmsr %0"::"r" (msr));
-}
-
-int board_early_init_f (void)
-{
- unsigned char c_value = 0;
- unsigned long msr;
-
- /* Basic init of PS/2 keyboard (needed for some reason)... */
- /* Ripped from John's code */
- while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0);
- out_8 ((unsigned char *) 0xfe000064, 0xaa);
- while ((in_8 ((unsigned char *) 0xfe000064) & 0x01) == 0);
- c_value = in_8 ((unsigned char *) 0xfe000060);
- while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0);
- out_8 ((unsigned char *) 0xfe000064, 0xab);
- while ((in_8 ((unsigned char *) 0xfe000064) & 0x01) == 0);
- c_value = in_8 ((unsigned char *) 0xfe000060);
- while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0);
- out_8 ((unsigned char *) 0xfe000064, 0xae);
-/* while ((in_8((unsigned char *)0xfe000064) & 0x01) == 0); */
-/* c_value = in_8((unsigned char *)0xfe000060); */
-
- /* Enable FPU */
- msr = get_msr ();
- set_msr (msr | MSR_FP);
-
- via_calibrate_bus_freq ();
-
- return 0;
-}
+++ /dev/null
-#ifndef ARTICIAS_H
-#define ARTICIAS_H
-
-#include "short_types.h"
-#include <common.h>
-
-#define REG_GROUP 0xF0
-
-/* ArticiaS registers */
-#define GLOBALINFO0 0x50
-#define GLOBALINFO1 0x51
-#define GLOBALINFO2 0x52
-#define GLOBALINFO3 0x53
-#define GLOBALCTL0 0x54
-#define GLOBALCTL1 0x55
-#define NVRAMCTL 0x56
-#define PCI1ACR0 0x58
-#define PCI1ACR1 0x59
-#define PCI1ACR2 0x5a
-#define PCI1ACR3 0x5b
-#define HBUSACR0 0x5c
-#define HBUSACR1 0x5d
-#define HBUSACR2 0x5e
-#define HBUSACR3 0x5f
-#define HOSTINT0 0x68
-#define HOSTINT1 0x69
-#define HOSTINT2 0x6a
-#define HOSTINT3 0x6b
-#define HOSTRBCR 0x70
-#define XDBCR 0x74
-
-#define LBSBCR2 0xd2
-
-
-/* Memory controller */
-
-#define DIMM0_B0_SCR0 0x90
-#define DIMM0_B1_SCR0 0x94
-#define DIMM1_B2_SCR0 0x98
-#define DIMM1_B3_SCR0 0x9c
-#define DIMM2_B4_SCR0 0xa0
-#define DIMM2_B5_SCR0 0xa4
-#define DIMM3_B6_SCR0 0xa8
-#define DIMM3_B7_SCR0 0xac
-
-#define DIMM0_TCR0 0xb0
-#define DIMM1_TCR0 0xb2
-#define DIMM2_TCR0 0xb4
-#define DIMM3_TCR0 0xb6
-
-#define DRAM_REFRESH0 0xb8
-#define DRAM_GCR0 0xc0
-#define DRAM_PCR0 0xc6
-#define DRAM_ECC0 0xc4
-#define SRAM_CR 0xc8
-#define DRAM_RAS_CTL0 0xcc
-#define DRAM_RAS_CTL1 0xcd
-
-/* Bits for REG_GROUP */
-#define REG_GROUP_MULTI (1<<1)
-#define REG_GROUP_SPECIAL (1<<3)
-#define REG_GROUP_DIAG (0x1<<4)
-#define REG_GROUP_POWER (0x2<<4)
-
-
-#define GLOBALINFO0_BO (1<<7)
-
-
-#define GLOBALINFO2_B1ARBITER (1<<6)
-
-
-#define HBUSACR0_CPUAPC (1<<0)
-#define HBUSACR0_NUMREQ_2 (0<<1)
-#define HBUSACR0_NUMREQ_3 (1<<1)
-#define HBUSACR0_NUMREQ_4 (2<<1)
-#define HBUSACR0_NUMREQ_MASK (7<<1)
-#define HBUSACR0_RAW (1<<6)
-#define HBUSACR0_WAIT (1<<7)
-#define HBUSACR0_RESERVED (0x30)
-
-
-#define HBUSACR2_BURST (1<<0)
-#define HBUSACR2_LAT (1<<1)
-
-
-#define HBUSACR3_LMWC_SM (1<<0)
-#define HBUSACR3_LMWC_PCI1 (1<<1)
-#define HBUSACR3_LMWC_PCI0 (1<<2)
-#define HBUSACR3_PMWC_PCI1 (1<<3)
-#define HBUSACR3_PMWC_PCI0 (1<<4)
-#define HBUSACR3_FKH (1<<5)
-#define HBUSACR3_92H_EN (1<<6)
-#define HBUSACR3_60H_64H_EN (1<<7)
-
-
-#define HOSTRBCR_PREFETCH (1<<4)
-
-
-#define XDBCR_HWTOXD (1<<0)
-#define XDBCR_KBTOXD (1<<1)
-#define XDBCR_RTCTOXD (1<<2)
-#define XDBCR_SCALE_1_1 (0x0<<3)
-#define XDBCR_SCALE_2_2 (0x1<<3)
-#define XDBCR_SCALE_3_2 (0x2<<3)
-#define XDBCR_SCALE_4_4 (0x3<<3)
-#define XDBCR_SCALE_5_8 (0x4<<3)
-#define XDBCR_SCALE_6_8 (0x5<<3)
-#define XDBCR_SCALE_8_8 (0x6<<3)
-#define XDBCR_SCALE_0_16 (0x7<<3)
-#define XDBCR_XDPROM (1<<7)
-
-
-#define LBSBCR2_1_RWAC (1<<2)
-
-
-/* PCI controller */
-#define ARTICIAS_PCI_CFGADDR 0xfec00cf8
-#define ARTICIAS_PCI_CFGDATA 0xfee00cfc
-
-#define ARTICIAS_PCI_BUS 0x80000000
-#define ARTICIAS_PCI_MAXSIZE 0x7cffffff
-#define ARTICIAS_PCI_PHYS 0x80000000
-
-#define ARTICIAS_SYS_BUS 0x00000000
-#define ARTICIAS_SYS_MAXSIZE 0x7fffffff
-#define ARTICIAS_SYS_PHYS 0x00000000
-
-#define ARTICIAS_PCIIO_BUS 0x00800000
-#define ARTICIAS_PCIIO_MAXSIZE 0x003fffff
-#define ARTICIAS_PCIIO_PHYS 0xfe800000
-
-#define ARTICIAS_ISAIO_BUS 0x00002000
-#define ARTICIAS_ISAIO_MAXSIZE 0x0000d000
-#define ARTICIAS_ISAIO_PHYS 0xfe002000
-
-
-/* Prototypes */
-long articiaS_ram_init(void);
-void articiaS_pci_init(void);
-
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Hyperion Entertainment, Hans-JoergF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include "memio.h"
-#include "articiaS.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef ARTICIA_PCI_DEBUG
-
-#ifdef ARTICIA_PCI_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-struct pci_controller articiaS_hose;
-
-long irq_alloc(long wanted);
-
-static pci_dev_t pci_hose_find_class(struct pci_controller *hose, int bus, short find_class, int index);
-static int articiaS_init_vga(void);
-static void pci_cfgfunc_dummy(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table);
-unsigned char pci_irq_alloc(void);
-
-extern void via_cfgfunc_via686(struct pci_controller * host, pci_dev_t dev, struct pci_config_table *table);
-extern void via_cfgfunc_ide_init(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table);
-extern void via_init_irq_routing(uint8 []);
-extern void via_init_afterscan(void);
-
-#define cfgfunc_via686 1
-#define cfgfunc_dummy 2
-#define cfgfunc_ide_init 3
-
-static struct pci_config_table config_table[] =
-{
- {
- 0x1106, PCI_ANY_ID, PCI_CLASS_BRIDGE_ISA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- (void *)cfgfunc_via686, {0, 0, 0}
- },
- {
- 0x1106, PCI_ANY_ID, PCI_ANY_ID, 0,7,4,
- (void *)cfgfunc_dummy, {0,0,0}
- },
- {
- 0x1106, 0x3068, PCI_ANY_ID, 0, 7, PCI_ANY_ID,
- (void *)cfgfunc_dummy, {0,0,0}
- },
- {
- 0x1106, PCI_ANY_ID, PCI_ANY_ID, 0,7,1,
- (void *)cfgfunc_ide_init, {0,0,0}
- },
- {
- 0,
- }
-};
-
-
-void pci_cfgfunc_dummy(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table)
-{
-
-
-}
-
-unsigned long irq_penalties[16] =
-{
- 1000, /* 0:timer */
- 1000, /* 1:keyboard */
- 1000, /* 2:cascade */
- 50, /* 3:serial (COM2) */
- 50, /* 4:serial (COM1) */
- 4, /* 5:USB2 */
- 100, /* 6:floppy */
- 3, /* 7:parallel */
- 50, /* 8:AC97/MC97 */
- 0, /* 9: */
- 3, /* 10:: */
- 0, /* 11: */
- 3, /* 12: USB1 */
- 0, /* 13: */
- 100, /* 14: ide0 */
- 100, /* 15: ide1 */
-};
-
-
-/*
- * The following defines a hard-coded interrupt mapping for the
- * know devices on the board.
- * If a device isn't found here, assumed to be a device that's
- * plugged into a PCI or AGP slot
- * NOTE: This table is machine dependant.
- */
-
-struct pci_irq_fixup_table
-{
- uint8 bus; /* Bus number */
- uint8 device; /* Device number */
- uint8 func; /* Function number */
- uint8 interrupt; /* Interrupt to use (0xff to disable) */
-};
-
-struct pci_irq_fixup_table fixuptab [] =
-{
- { 0, 0, 0, 0xff}, /* Articia S host bridge */
- { 0, 1, 0, 0xff}, /* Articia S AGP bridge */
-/* { 0, 6, 0, 0x05}, /###* 3COM ethernet */
- { 0, 7, 0, 0xff}, /* VIA southbridge */
- { 0, 7, 1, 0x0e}, /* IDE controller in legacy mode */
-/* { 0, 7, 2, 0x05}, /###* First USB controller */
-/* { 0, 7, 3, 0x0c}, /###* Second USB controller (shares interrupt with ethernet) */
- { 0, 7, 4, 0xff}, /* ACPI Power Management */
-/* { 0, 7, 5, 0x08}, /###* AC97 */
-/* { 0, 7, 6, 0x08}, /###* MC97 */
- { 0xff, 0xff, 0xff, 0xff}
-};
-
-
-/*
- * This table maps IRQ's to PCI interrupts
- */
-
-uint8 pci_intmap[4] = {0, 0, 0, 0};
-
-/*
- * Map PCI slots to interrupt routings
- * This table lists the device number assigned to a card inserted
- * into the slot, along with a permutation for the slot's IRQ routing.
- * NOTE: This table is machine dependant.
- */
-
-struct pci_slot_irq_routing
-{
- uint8 bus;
- uint8 device;
-
- uint8 ints[4];
-};
-
-struct pci_slot_irq_routing amigaone_pci_routing[] =
-{
- {0, 8, {0, 1, 2, 3}}, /* Slot 1 (left of riser slot) */
- {0, 9, {1, 2, 3, 0}}, /* Slot 2 (middle slot) */
- {0, 10, {2, 3, 0, 1}}, /* Slot 3 (leftmost slot) */
- {1, 0, {1, 0, 2, 3}}, /* AGP slot (only IRQA and IRQB) */
- {1, 1, {1, 2, 3, 0}}, /* PCI slot on AGP bus */
- {0, 6, {3, 3, 3, 3}}, /* On board ethernet */
- {0, 7, {0, 1, 2, 3}}, /* Southbridge */
- {0xff, 0, {0, 0, 0, 0}}
-};
-
-void articiaS_pci_irq_init(void)
-{
- char *s;
-
- s = getenv("pci_irqa");
- if (s)
- pci_intmap[0] = simple_strtoul (s, NULL, 10);
- else
- pci_intmap[0] = pci_irq_alloc();
-
- s = getenv("pci_irqb");
- if (s)
- pci_intmap[1] = simple_strtoul (s, NULL, 10);
- else
- pci_intmap[1] = pci_irq_alloc();
-
- s = getenv("pci_irqc");
- if (s)
- pci_intmap[2] = simple_strtoul (s, NULL, 10);
- else
- pci_intmap[2] = pci_irq_alloc();
-
- s = getenv("pci_irqd");
- if (s)
- pci_intmap[3] = simple_strtoul (s, NULL, 10);
- else
- pci_intmap[3] = pci_irq_alloc();
-}
-
-
-unsigned char pci_irq_alloc(void)
-{
- int i;
- int interrupt = 10;
- unsigned long min_penalty = 1000;
-
- /* Search for the minimal penalty, favoring interrupts at the end */
- for (i = 0; i < 16; i++)
- {
- if (irq_penalties[i] <= min_penalty)
- {
- interrupt = i;
- min_penalty = irq_penalties[i];
- }
- }
-
- PRINTF("pci_irq_alloc: Minimal penalty is %ld for %d\n", min_penalty, interrupt);
-
- irq_penalties[interrupt]++;
-
- return interrupt;
-}
-
-
-void articiaS_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
- int8 bus, device, func, pin, line;
- int i;
-
- bus = PCI_BUS(dev);
- device = PCI_DEV(dev);
- func = PCI_FUNC(dev);
-
- PRINTF("Fixup irq of %d:%d.%d\n", bus, device, func);
-
- /* Search for the device in the table */
- for (i = 0; fixuptab[i].bus != 0xff; i++)
- {
- if (bus == fixuptab[i].bus && device == fixuptab[i].device && func == fixuptab[i].func)
- {
- /* If the device needs an interrupt, write it */
- if (fixuptab[i].interrupt != 0xff)
- {
- PRINTF("Assigning IRQ %d (fixed)\n", fixuptab[i].interrupt);
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, fixuptab[i].interrupt);
- }
- else
- {
- /* Otherwise, see if it wants an interrupt, and disable it if needed */
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin)
- {
- PRINTF("Disabling IRQ\n");
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0xff);
- }
- }
-
- return;
- }
- }
-
- /* If we get here, we have another PCI device in a slot... find the appropriate IRQ */
-
- /* Find matching pin */
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- pin--;
-
- /* Search for it's map */
- for (i = 0; amigaone_pci_routing[i].bus != 0xff; i++)
- {
- if (bus == amigaone_pci_routing[i].bus && device == amigaone_pci_routing[i].device)
- {
- line = pci_intmap[amigaone_pci_routing[i].ints[pin]];
- PRINTF("Assigning IRQ %d (pin %d)\n", line, pin);
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, line);
- return;
- }
- }
-
- PRINTF("Unkonwn PCI device found\n");
-}
-
-void articiaS_pci_init (void)
-{
- int i;
- char *s;
-
- PRINTF("atriciaS_pci_init\n");
-
- /* Why aren't these relocated?? */
- for (i=0; config_table[i].config_device; i++)
- {
- switch((int)config_table[i].config_device)
- {
- case cfgfunc_via686: config_table[i].config_device = via_cfgfunc_via686; break;
- case cfgfunc_dummy: config_table[i].config_device = pci_cfgfunc_dummy; break;
- case cfgfunc_ide_init: config_table[i].config_device = via_cfgfunc_ide_init; break;
- default: PRINTF("Error: Unknown constant\n");
- }
- }
-
- articiaS_hose.first_busno = 0;
- articiaS_hose.last_busno = 0xff;
- articiaS_hose.config_table = config_table;
- articiaS_hose.fixup_irq = articiaS_pci_fixup_irq;
-
- articiaS_pci_irq_init();
-
- /* System memory */
- pci_set_region(articiaS_hose.regions + 0,
- ARTICIAS_SYS_BUS,
- ARTICIAS_SYS_PHYS,
- ARTICIAS_SYS_MAXSIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(articiaS_hose.regions + 1,
- ARTICIAS_PCI_BUS,
- ARTICIAS_PCI_PHYS,
- ARTICIAS_PCI_MAXSIZE,
- PCI_REGION_MEM);
-
- /* PCI io space */
- pci_set_region(articiaS_hose.regions + 2,
- ARTICIAS_PCIIO_BUS,
- ARTICIAS_PCIIO_PHYS,
- ARTICIAS_PCIIO_MAXSIZE,
- PCI_REGION_IO);
-
- /* PCI/ISA io space */
- pci_set_region(articiaS_hose.regions + 3,
- ARTICIAS_ISAIO_BUS,
- ARTICIAS_ISAIO_PHYS,
- ARTICIAS_ISAIO_MAXSIZE,
- PCI_REGION_IO);
-
-
- articiaS_hose.region_count = 4;
-
- pci_setup_indirect(&articiaS_hose, ARTICIAS_PCI_CFGADDR, ARTICIAS_PCI_CFGDATA);
- PRINTF("Registering articia hose...\n");
- pci_register_hose(&articiaS_hose);
- PRINTF("Enabling AGP...\n");
- pci_write_config_byte(PCI_BDF(0,0,0), 0x58, 0x01);
- PRINTF("Scanning bus...\n");
- articiaS_hose.last_busno = pci_hose_scan(&articiaS_hose);
-
- via_init_irq_routing(pci_intmap);
-
- PRINTF("After-Scan results:\n");
- PRINTF("Bus range: %d - %d\n", articiaS_hose.first_busno , articiaS_hose.last_busno);
-
- via_init_afterscan();
-
- pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF);
-
- s = getenv("as_irq");
- if (s)
- {
- pci_write_config_byte(PCI_BDF(0,0,0), PCI_INTERRUPT_LINE, simple_strtoul (s, NULL, 10));
- }
-
- s = getenv("x86_run_bios");
- if (!s || (s && strcmp(s, "on")==0))
- {
- if (articiaS_init_vga() == -1)
- {
- /* If the VGA didn't init and we have stdout set to VGA, reset to serial */
-/* s = getenv("stdout"); */
-/* if (s && strcmp(s, "vga") == 0) */
-/* { */
-/* setenv("stdout", "serial"); */
-/* } */
- }
- }
- pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF);
-
-}
-
-pci_dev_t pci_hose_find_class(struct pci_controller *hose, int bus, short find_class, int index)
-{
- unsigned int sub_bus, found_multi=0;
- unsigned short vendor, class;
- unsigned char header_type;
- pci_dev_t dev;
- u8 c1, c2;
-
- sub_bus = bus;
-
- for (dev = PCI_BDF(bus,0,0);
- dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
- dev += PCI_BDF(0,0,1))
- {
- if ( dev == PCI_BDF(hose->first_busno,0,0) )
- continue;
-
- if (PCI_FUNC(dev) && !found_multi)
- continue;
-
- pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
-
- pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
-
- if (vendor != 0xffff && vendor != 0x0000)
- {
-
- if (!PCI_FUNC(dev))
- found_multi = header_type & 0x80;
- pci_hose_read_config_byte(hose, dev, 0x0B, &c1);
- pci_hose_read_config_byte(hose, dev, 0x0A, &c2);
- class = c1<<8 | c2;
- /*printf("At %02x:%02x:%02x: class %x\n", */
- /* PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), class); */
- if (class == find_class)
- {
- if (index == 0)
- return dev;
- else index--;
- }
- }
- }
-
- return ~0;
-}
-
-
-/*
- * For a given bus number, find the bridge on this hose that provides this
- * bus number. The function scans for bridges and peeks config space offset
- * 0x19 (PCI_SECONDARY_BUS).
- */
-pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr)
-{
- pci_dev_t dev;
- int bus;
- unsigned int found_multi=0;
- unsigned char header_type;
- unsigned short vendor;
- unsigned char secondary_bus;
-
- if (hose == NULL) hose = &articiaS_hose;
-
- if (busnr < hose->first_busno || busnr > hose->last_busno) return PCI_ANY_ID; /* Not in range */
-
- /*
- * The bridge must be on a lower bus number
- */
- for (bus = hose->first_busno; bus < busnr; bus++)
- {
- for (dev = PCI_BDF(bus,0,0);
- dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
- dev += PCI_BDF(0,0,1))
- {
- if ( dev == PCI_BDF(hose->first_busno,0,0) )
- continue;
-
- if (PCI_FUNC(dev) && !found_multi)
- continue;
-
- pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
-
- pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
-
- if (vendor != 0xffff && vendor != 0x0000)
- {
-
- if (!PCI_FUNC(dev))
- found_multi = header_type & 0x80;
- if (header_type == 1) /* Bridge device header */
- {
- pci_hose_read_config_byte(hose, dev, PCI_SECONDARY_BUS, &secondary_bus);
- if ((int)secondary_bus == busnr) return dev;
- }
-
- }
- }
- }
- return PCI_ANY_ID;
-}
-
-static short classes[] =
-{
- PCI_CLASS_DISPLAY_VGA,
- PCI_CLASS_DISPLAY_XGA,
- PCI_CLASS_DISPLAY_3D,
- PCI_CLASS_DISPLAY_OTHER,
- ~0
-};
-
-extern int execute_bios(pci_dev_t gr_dev, void *);
-
-pci_dev_t video_dev;
-
-int articiaS_init_vga (void)
-{
- extern void shutdown_bios(void);
- pci_dev_t dev = ~0;
- int busnr = 0;
- int classnr = 0;
-
- video_dev = PCI_ANY_ID;
-
- printf("VGA: ");
-
- PRINTF("Trying to initialize x86 VGA Card(s)\n");
-
- while (dev == ~0)
- {
- PRINTF("Searching for class 0x%x on bus %d\n", classes[classnr], busnr);
- /* Find the first of this class on this bus */
- dev = pci_hose_find_class(&articiaS_hose, busnr, classes[classnr], 0);
- if (dev != ~0)
- {
- PRINTF("Found VGA Card at %02x:%02x:%02x\n", PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
- break;
- }
- busnr++;
- if (busnr > articiaS_hose.last_busno)
- {
- busnr = 0;
- classnr ++;
- if (classes[classnr] == ~0)
- {
- printf("NOT PRESENT\n");
- return -1;
- }
- }
- }
-
- /*
- * If we get here we have found the first graphics card.
- * If the bus number is not 0, then it is probably behind a bridge, and the
- * bridge needs to be told to forward VGA access.
- */
-
- if (PCI_BUS(dev) != 0)
- {
- pci_dev_t bridge;
- PRINTF("Behind bridge, looking for bridge\n");
- bridge = pci_find_bridge_for_bus(&articiaS_hose, PCI_BUS(dev));
- if (dev != PCI_ANY_ID)
- {
- unsigned char agp_control_0;
- PRINTF("Got the bridge at %02x:%02x:%02x\n",
- PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
- pci_hose_read_config_byte(&articiaS_hose, bridge, 0x3E, &agp_control_0);
- agp_control_0 |= 0x18;
- pci_hose_write_config_byte(&articiaS_hose, bridge, 0x3E, agp_control_0);
- PRINTF("Configured for VGA forwarding\n");
- }
- }
-
- /*
- * Now try to run the bios
- */
- PRINTF("Trying to run bios now\n");
- if (execute_bios(dev, gd->relocaddr))
- {
- printf("OK\n");
- video_dev = dev;
- }
- else
- {
- printf("ERROR\n");
- }
-
- PRINTF("Done scanning.\n");
-
- shutdown_bios();
-
- if (dev == PCI_ANY_ID) return -1;
- else return 0;
-
-}
+++ /dev/null
-#include "macros.h"
-
-
-#define GLOBALINFO0 0x50
-#define GLOBALINFO0_BO (1<<7)
-#define GLOBALINFO2_B1ARBITER (1<<6)
-#define HBUSACR0 0x5c
-#define HBUSACR2_BURST (1<<0)
-#define HBUSACR2_LAT (1<<1)
-
-#define RECEIVER_HOLDING 0
-#define TRANSMITTER_HOLDING 0
-#define INTERRUPT_ENABLE 1
-#define INTERRUPT_STATUS 2
-#define FIFO_CONTROL 2
-#define LINE_CONTROL 3
-#define MODEM_CONTROL 4
-#define LINE_STATUS 5
-#define MODEM_STATUS 6
-#define SCRATCH_PAD 7
-
-#define DIVISOR_LATCH_LSB 0
-#define DIVISOR_LATCH_MSB 1
-#define PRESCALER_DIVISION 5
-
-#define UART(x) (0x3f8+(x))
-
-#define GLOBALINFO0 0x50
-#define GLOBALINFO0_BO (1<<7)
-#define GLOBALINFO2_B1ARBITER (1<<6)
-#define HBUSACR0 0x5c
-#define HBUSACR2_BURST (1<<0)
-#define HBUSACR2_LAT (1<<1)
-
-#define SUPERIO_1 ((7 << 3) | (0))
-#define SUPERIO_2 ((7 << 3) | (1))
-
- .globl board_asm_init
-
-board_asm_init:
- mflr r29
- /* Set 'Must-set' register */
- li r3, 0
- li r4, 0
- li r5, 0x5e
- bl pci_read_cfg_byte
- ori r3, r3, (1<<1)
- xori r6, r3, (1<<1)
- li r3, 0
- bl pci_write_cfg_byte
-
- li r3, 0
- li r5, 0x52
- bl pci_read_cfg_byte
- ori r6, r3, (1<<6)
- li r3, 0
- bl pci_write_cfg_byte
-
- li r3, 0
- li r4, 0x08
- li r5, 0xd2
- bl pci_read_cfg_byte
- ori r6, r3, (1<<2)
- li r3, 0
- bl pci_write_cfg_byte
-
-
- /* Do PCI reset */
-/* li r3, 0
- li r4, 0x38
- li r5, 0x47
- bl pci_read_cfg_byte
- ori r6, r3, 0x01
- li r3, 0
- li r4, 0x38
- li r5, 0x47
- bl pci_write_cfg_byte*/
-
-
- /* Enable NVRAM for environment */
- li r3, 0
- li r4, 0
- li r5, 0x56
- li r6, 0x0B
- bl pci_write_cfg_byte
-
-
- /* Init Super-I/O chips */
-
- siowb 0x40, 0x08
- siowb 0x41, 0x01
- siowb 0x45, 0x80
- siowb 0x46, 0x60
- siowb 0x47, 0x20
- siowb 0x48, 0x01
- siowb 0x4a, 0xc4
- siowb 0x50, 0x0e
- siowb 0x51, 0x76
- siowb 0x52, 0x34
- siowb 0x54, 0x00
- siowb 0x55, 0x90
- siowb 0x56, 0x99
- siowb 0x57, 0x90
- siowb 0x85, 0x01
-
- /* Enable configuration mode for SuperIO */
- li r3, 0
- li r4, (7<<3)
- li r5, 0x85
- bl pci_read_cfg_byte
- ori r6, r3, 0x02
- mr r31, r6
- li r3,0
- bl pci_write_cfg_byte
-
- /* COM1 as 3f8 */
- outb 0x3f0, 0xe7
- outb 0x3f1, 0xfe
-
- /* COM2 as 2f8 */
- outb 0x3f0, 0xe8
- outb 0x3f1, 0xeb
-
- /* Enable */
- outb 0x3f0, 0xe2
- inb r3, 0x3f1
- ori r3, r3, 0x0c
- outb 0x3f0, 0xe2
- outbr 0x3f1, r3
-
- /* Disable configuration mode */
- li r3, 0
- li r4, (7<<3)
- li r5, 0x85
- mr r6, r31
- bl pci_write_cfg_byte
-
- /* Set line control */
- outb UART(LINE_CONTROL), 0x83
- outb UART(DIVISOR_LATCH_LSB), 0x0c
- outb UART(DIVISOR_LATCH_MSB), 0x00
- outb UART(LINE_CONTROL), 0x3
-
- mtlr r29
- blr
-
-
- .globl new_reset
- .globl new_reset_end
-new_reset:
- li r0, 0x100
- oris r0, r0, 0xFFF0
- mtlr r0
- blr
-
-new_reset_end:
+++ /dev/null
-#include <common.h>
-#include <command.h>
-#include "../disk/part_amiga.h"
-#include <asm/cache.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef BOOTA_DEBUG
-
-#ifdef BOOTA_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-struct block_header {
- u32 id;
- u32 summed_longs;
- s32 chk_sum;
-};
-
-extern block_dev_desc_t *ide_get_dev (int dev);
-extern struct bootcode_block *get_bootcode (block_dev_desc_t * dev_desc);
-extern int sum_block (struct block_header *header);
-
-struct bootcode_block bblk;
-
-int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- unsigned char *load_address = (unsigned char *) CONFIG_SYS_LOAD_ADDR;
- unsigned char *base_address;
- unsigned long offset;
-
- unsigned long part_number = 0;
- block_dev_desc_t *boot_disk;
- char *s;
- struct bootcode_block *boot_code;
-
- /* Get parameters */
-
- switch (argc) {
- case 2:
- load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16);
- part_number = 0;
- break;
- case 3:
- load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16);
- part_number = simple_strtol (argv[2], NULL, 16);
- break;
- }
-
- base_address = load_address;
-
- PRINTF ("Loading boot code from disk %d to %p\n", part_number,
- load_address);
-
- /* Find the appropriate disk device */
- boot_disk = ide_get_dev (part_number);
- if (!boot_disk) {
- PRINTF ("Unknown disk %d\n", part_number);
- return 1;
- }
-
- /* Find the bootcode block */
- boot_code = get_bootcode (boot_disk);
- if (!boot_code) {
- PRINTF ("Not a bootable disk %d\n", part_number);
- return 1;
- }
-
- /* Only use the offset from the first block */
- offset = boot_code->load_data[0];
- memcpy (load_address, &boot_code->load_data[1], 122 * 4);
- load_address += 122 * 4;
-
- /* Setup for the loop */
- bblk.next = boot_code->next;
- boot_code = &bblk;
-
- /* Scan the chain, and copy the loader succesively into the destination area */
- while (0xffffffff != boot_code->next) {
- PRINTF ("Loading block %d\n", boot_code->next);
-
- /* Load block */
- if (1 !=
- boot_disk->block_read (boot_disk->dev, boot_code->next, 1,
- (ulong *) & bblk)) {
- PRINTF ("Read error\n");
- return 1;
- }
-
- /* check sum */
- if (sum_block ((struct block_header *) (ulong *) & bblk) != 0) {
- PRINTF ("Checksum error\n");
- return 1;
- }
-
- /* Ok, concatenate it to the already loaded code */
- memcpy (load_address, boot_code->load_data, 123 * 4);
- load_address += 123 * 4;
- }
-
- printf ("Bootcode loaded to %p (size %d)\n", base_address,
- load_address - base_address);
- printf ("Entry point at %p\n", base_address + offset);
-
- flush_cache (base_address, load_address - base_address);
-
-
- s = getenv ("autostart");
- if (s && strcmp (s, "yes") == 0) {
- void (*boot) (bd_t *, char *, block_dev_desc_t *);
- char *args;
-
- boot = (void (*)(bd_t *, char *, block_dev_desc_t *)) (base_address + offset);
- boot (gd->bd, getenv ("amiga_bootargs"), boot_disk);
- }
-
-
- return 0;
-}
-#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
-U_BOOT_CMD(
- boota, 3, 1, do_boota,
- "boot an Amiga kernel",
- "address disk"
-);
-#endif /* _CMD_BOOTA_H */
+++ /dev/null
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# AmigaOneG3SE boards
-#
-
-X86EMU = -I../bios_emulator/scitech/include -I../bios_emulator/scitech/src/x86emu
-
-TEXT_BASE = 0xfff00000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -Wa,-mregnames -DEASTEREGG $(X86EMU) -Dprintk=printf #-DDEBUG
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Adam Kowalczyk, ACK Software Controls Inc. akowalczyk@cogeco.ca
- *
- * Some portions taken from 3c59x.c Written 1996-1999 by Donald Becker.
- *
- * Outline of the program based on eepro100.c which is
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#include "articiaS.h"
-#include "memio.h"
-
-/* 3Com Ethernet PCI definitions*/
-
-/* #define PCI_VENDOR_ID_3COM 0x10B7 */
-#define PCI_DEVICE_ID_3COM_3C905C 0x9200
-
-/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */
-
-#define TotalReset (0<<11)
-#define SelectWindow (1<<11)
-#define StartCoax (2<<11)
-#define RxDisable (3<<11)
-#define RxEnable (4<<11)
-#define RxReset (5<<11)
-#define UpStall (6<<11)
-#define UpUnstall (6<<11)+1
-#define DownStall (6<<11)+2
-#define DownUnstall (6<<11)+3
-#define RxDiscard (8<<11)
-#define TxEnable (9<<11)
-#define TxDisable (10<<11)
-#define TxReset (11<<11)
-#define FakeIntr (12<<11)
-#define AckIntr (13<<11)
-#define SetIntrEnb (14<<11)
-#define SetStatusEnb (15<<11)
-#define SetRxFilter (16<<11)
-#define SetRxThreshold (17<<11)
-#define SetTxThreshold (18<<11)
-#define SetTxStart (19<<11)
-#define StartDMAUp (20<<11)
-#define StartDMADown (20<<11)+1
-#define StatsEnable (21<<11)
-#define StatsDisable (22<<11)
-#define StopCoax (23<<11)
-#define SetFilterBit (25<<11)
-
-/* The SetRxFilter command accepts the following classes */
-
-#define RxStation 1
-#define RxMulticast 2
-#define RxBroadcast 4
-#define RxProm 8
-
-/* 3Com status word defnitions */
-
-#define IntLatch 0x0001
-#define HostError 0x0002
-#define TxComplete 0x0004
-#define TxAvailable 0x0008
-#define RxComplete 0x0010
-#define RxEarly 0x0020
-#define IntReq 0x0040
-#define StatsFull 0x0080
-#define DMADone (1<<8)
-#define DownComplete (1<<9)
-#define UpComplete (1<<10)
-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
-
-/* Polling Registers */
-
-#define DnPoll 0x2d
-#define UpPoll 0x3d
-
-/* Register window 0 offets */
-
-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
-#define IntrStatus 0x0E /* Valid in all windows. */
-
-/* Register window 0 EEPROM bits */
-
-#define EEPROM_Read 0x80
-#define EEPROM_WRITE 0x40
-#define EEPROM_ERASE 0xC0
-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
-
-/* EEPROM locations. */
-
-#define PhysAddr01 0
-#define PhysAddr23 1
-#define PhysAddr45 2
-#define ModelID 3
-#define EtherLink3ID 7
-#define IFXcvrIO 8
-#define IRQLine 9
-#define NodeAddr01 10
-#define NodeAddr23 11
-#define NodeAddr45 12
-#define DriverTune 13
-#define Checksum 15
-
-/* Register window 1 offsets, the window used in normal operation */
-
-#define TX_FIFO 0x10
-#define RX_FIFOa 0x10
-#define RxErrors 0x14
-#define RxStatus 0x18
-#define Timer 0x1A
-#define TxStatus 0x1B
-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
-
-/* Register Window 2 */
-
-#define Wn2_ResetOptions 12
-
-/* Register Window 3: MAC/config bits */
-
-#define Wn3_Config 0 /* Internal Configuration */
-#define Wn3_MAC_Ctrl 6
-#define Wn3_Options 8
-
-#define BFEXT(value, offset, bitcount) \
- ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
-
-#define BFINS(lhs, rhs, offset, bitcount) \
- (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
- (((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
-
-#define RAM_SIZE(v) BFEXT(v, 0, 3)
-#define RAM_WIDTH(v) BFEXT(v, 3, 1)
-#define RAM_SPEED(v) BFEXT(v, 4, 2)
-#define ROM_SIZE(v) BFEXT(v, 6, 2)
-#define RAM_SPLIT(v) BFEXT(v, 16, 2)
-#define XCVR(v) BFEXT(v, 20, 4)
-#define AUTOSELECT(v) BFEXT(v, 24, 1)
-
-/* Register Window 4: Xcvr/media bits */
-
-#define Wn4_FIFODiag 4
-#define Wn4_NetDiag 6
-#define Wn4_PhysicalMgmt 8
-#define Wn4_Media 10
-
-#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
-#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
-#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
-#define Media_LnkBeat 0x0800
-
-/* Register Window 7: Bus Master control */
-
-#define Wn7_MasterAddr 0
-#define Wn7_MasterLen 6
-#define Wn7_MasterStatus 12
-
-/* Boomerang bus master control registers. */
-
-#define PktStatus 0x20
-#define DownListPtr 0x24
-#define FragAddr 0x28
-#define FragLen 0x2c
-#define TxFreeThreshold 0x2f
-#define UpPktStatus 0x30
-#define UpListPtr 0x38
-
-/* The Rx and Tx descriptor lists. */
-
-#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */
-#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */
-
-struct rx_desc_3com {
- u32 next; /* Last entry points to 0 */
- u32 status; /* FSH -> Frame Start Header */
- u32 addr; /* Up to 63 addr/len pairs possible */
- u32 length; /* Set LAST_FRAG to indicate last pair */
-};
-
-/* Values for the Rx status entry. */
-
-#define RxDComplete 0x00008000
-#define RxDError 0x4000
-#define IPChksumErr (1<<25)
-#define TCPChksumErr (1<<26)
-#define UDPChksumErr (1<<27)
-#define IPChksumValid (1<<29)
-#define TCPChksumValid (1<<30)
-#define UDPChksumValid (1<<31)
-
-struct tx_desc_3com {
- u32 next; /* Last entry points to 0 */
- u32 status; /* bits 0:12 length, others see below */
- u32 addr;
- u32 length;
-};
-
-/* Values for the Tx status entry. */
-
-#define CRCDisable 0x2000
-#define TxDComplete 0x8000
-#define AddIPChksum 0x02000000
-#define AddTCPChksum 0x04000000
-#define AddUDPChksum 0x08000000
-#define TxIntrUploaded 0x80000000 /* IRQ when in FIFO, but maybe not sent. */
-
-/* XCVR Types */
-
-#define XCVR_10baseT 0
-#define XCVR_AUI 1
-#define XCVR_10baseTOnly 2
-#define XCVR_10base2 3
-#define XCVR_100baseTx 4
-#define XCVR_100baseFx 5
-#define XCVR_MII 6
-#define XCVR_NWAY 8
-#define XCVR_ExtMII 9
-#define XCVR_Default 10 /* I don't think this is correct -> should have been 0x10 if Auto Negotiate */
-
-struct descriptor { /* A generic descriptor. */
- u32 next; /* Last entry points to 0 */
- u32 status; /* FSH -> Frame Start Header */
- u32 addr; /* Up to 63 addr/len pairs possible */
- u32 length; /* Set LAST_FRAG to indicate last pair */
-};
-
-/* Misc. definitions */
-
-#define NUM_RX_DESC PKTBUFSRX * 10
-#define NUM_TX_DESC 1 /* Number of TX descriptors */
-
-#define TOUT_LOOP 1000000
-
-#define ETH_ALEN 6
-
-#define EL3WINDOW(dev, win_num) ETH_OUTW(dev, SelectWindow + (win_num), EL3_CMD)
-#define EL3_CMD 0x0e
-#define EL3_STATUS 0x0e
-
-
-#undef ETH_DEBUG
-
-#ifdef ETH_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-
-static struct rx_desc_3com *rx_ring; /* RX descriptor ring */
-static struct tx_desc_3com *tx_ring; /* TX descriptor ring */
-static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN];/* storage for the incoming messages */
-static int rx_next = 0; /* RX descriptor ring pointer */
-static int tx_next = 0; /* TX descriptor ring pointer */
-static int tx_threshold;
-
-static void init_rx_ring(struct eth_device* dev);
-static void purge_tx_ring(struct eth_device* dev);
-
-static void read_hw_addr(struct eth_device* dev, bd_t * bis);
-
-static int eth_3com_init(struct eth_device* dev, bd_t *bis);
-static int eth_3com_send(struct eth_device* dev, volatile void *packet, int length);
-static int eth_3com_recv(struct eth_device* dev);
-static void eth_3com_halt(struct eth_device* dev);
-
-#define io_to_phys(a) pci_io_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_io(a) pci_phys_to_io((pci_dev_t)dev->priv, a)
-#define mem_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_mem(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
-
-static inline int ETH_INL(struct eth_device* dev, u_long addr)
-{
- __asm__ volatile ("eieio");
- return le32_to_cpu(*(volatile u32 *)io_to_phys(addr + dev->iobase));
-}
-
-static inline int ETH_INW(struct eth_device* dev, u_long addr)
-{
- __asm__ volatile ("eieio");
- return le16_to_cpu(*(volatile u16 *)io_to_phys(addr + dev->iobase));
-}
-
-static inline int ETH_INB(struct eth_device* dev, u_long addr)
-{
- __asm__ volatile ("eieio");
- return *(volatile u8 *)io_to_phys(addr + dev->iobase);
-}
-
-static inline void ETH_OUTB(struct eth_device* dev, int command, u_long addr)
-{
- *(volatile u8 *)io_to_phys(addr + dev->iobase) = command;
- __asm__ volatile ("eieio");
-}
-
-static inline void ETH_OUTW(struct eth_device* dev, int command, u_long addr)
-{
- *(volatile u16 *)io_to_phys(addr + dev->iobase) = cpu_to_le16(command);
- __asm__ volatile ("eieio");
-}
-
-static inline void ETH_OUTL(struct eth_device* dev, int command, u_long addr)
-{
- *(volatile u32 *)io_to_phys(addr + dev->iobase) = cpu_to_le32(command);
- __asm__ volatile ("eieio");
-}
-
-static inline int ETH_STATUS(struct eth_device* dev)
-{
- __asm__ volatile ("eieio");
- return le16_to_cpu(*(volatile u16 *)io_to_phys(EL3_STATUS + dev->iobase));
-}
-
-static inline void ETH_CMD(struct eth_device* dev, int command)
-{
- *(volatile u16 *)io_to_phys(EL3_CMD + dev->iobase) = cpu_to_le16(command);
- __asm__ volatile ("eieio");
-}
-
-/* Command register is always in the same spot in all the register windows */
-/* This function issues a command and waits for it so complete by checking the CmdInProgress bit */
-
-static int issue_and_wait(struct eth_device* dev, int command)
-{
-
- int i, status;
-
- ETH_CMD(dev, command);
- for (i = 0; i < 2000; i++) {
- status = ETH_STATUS(dev);
- /*printf ("Issue: status 0x%4x.\n", status); */
- if (!(status & CmdInProgress))
- return 1;
- }
-
- /* OK, that didn't work. Do it the slow way. One second */
- for (i = 0; i < 100000; i++) {
- status = ETH_STATUS(dev);
- /*printf ("Issue: status 0x%4x.\n", status); */
- return 1;
- udelay(10);
- }
- PRINTF("Ethernet command: 0x%4x did not complete! Status: 0x%4x\n", command, ETH_STATUS(dev) );
- return 0;
-}
-
-/* Determine network media type and set up 3com accordingly */
-/* I think I'm going to start with something known first like 10baseT */
-
-static int auto_negotiate (struct eth_device *dev)
-{
- int i;
-
- EL3WINDOW (dev, 1);
-
- /* Wait for Auto negotiation to complete */
- for (i = 0; i <= 1000; i++) {
- if (ETH_INW (dev, 2) & 0x04)
- break;
- udelay (100);
-
- if (i == 1000) {
- PRINTF ("Error: Auto negotiation failed\n");
- return 0;
- }
- }
-
-
- return 1;
-}
-
-void eth_interrupt (struct eth_device *dev)
-{
- u16 status = ETH_STATUS (dev);
-
- printf ("eth0: status = 0x%04x\n", status);
-
- if (!(status & IntLatch))
- return;
-
- if (status & (1 << 6)) {
- ETH_CMD (dev, AckIntr | (1 << 6));
- printf ("Acknowledged Interrupt command\n");
- }
-
- if (status & DownComplete) {
- ETH_CMD (dev, AckIntr | DownComplete);
- printf ("Acknowledged DownComplete\n");
- }
-
- if (status & UpComplete) {
- ETH_CMD (dev, AckIntr | UpComplete);
- printf ("Acknowledged UpComplete\n");
- }
-
- ETH_CMD (dev, AckIntr | IntLatch);
- printf ("Acknowledged IntLatch\n");
-}
-
-int eth_3com_initialize (bd_t * bis)
-{
- u32 eth_iobase = 0, status;
- int card_number = 0, ret;
- struct eth_device *dev;
- pci_dev_t devno;
- char *s;
-
- s = getenv ("3com_base");
-
- /* Find ethernet controller on the PCI bus */
-
- if ((devno =
- pci_find_device (PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C,
- 0)) < 0) {
- PRINTF ("Error: Cannot find the ethernet device on the PCI bus\n");
- goto Done;
- }
-
- if (s) {
- unsigned long base = atoi (s);
-
- pci_write_config_dword (devno, PCI_BASE_ADDRESS_0,
- base | 0x01);
- }
-
- ret = pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, ð_iobase);
- eth_iobase &= ~0xf;
-
- PRINTF ("eth: 3Com Found at Address: 0x%x\n", eth_iobase);
-
- pci_write_config_dword (devno, PCI_COMMAND,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
-
- /* Check if I/O accesses and Bus Mastering are enabled */
-
- ret = pci_read_config_dword (devno, PCI_COMMAND, &status);
-
- if (!(status & PCI_COMMAND_IO)) {
- printf ("Error: Cannot enable IO access.\n");
- goto Done;
- }
-
- if (!(status & PCI_COMMAND_MEMORY)) {
- printf ("Error: Cannot enable MEMORY access.\n");
- goto Done;
- }
-
- if (!(status & PCI_COMMAND_MASTER)) {
- printf ("Error: Cannot enable Bus Mastering.\n");
- goto Done;
- }
-
- dev = (struct eth_device *) malloc (sizeof (*dev)); /*struct eth_device)); */
-
- sprintf (dev->name, "3Com 3c920c#%d", card_number);
- dev->iobase = eth_iobase;
- dev->priv = (void *) devno;
- dev->init = eth_3com_init;
- dev->halt = eth_3com_halt;
- dev->send = eth_3com_send;
- dev->recv = eth_3com_recv;
-
- eth_register (dev);
-
-/* { */
-/* char interrupt; */
-/* devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0); */
-/* pci_read_config_byte(devno, PCI_INTERRUPT_LINE, &interrupt); */
-
-/* printf("Installing eth0 interrupt handler to %d\n", interrupt); */
-/* irq_install_handler(interrupt, eth_interrupt, dev); */
-/* } */
-
- card_number++;
-
- /* Set the latency timer for value */
- s = getenv ("3com_latency");
- if (s) {
- ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER,
- (unsigned char) atoi (s));
- } else
- ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x0a);
-
- read_hw_addr (dev, bis); /* get the MAC address from Window 2 */
-
- /* Reset the ethernet controller */
-
- PRINTF ("Issuing reset command....\n");
- if (!issue_and_wait (dev, TotalReset)) {
- printf ("Error: Cannot reset ethernet controller.\n");
- goto Done;
- } else
- PRINTF ("Ethernet controller reset.\n");
-
- /* allocate memory for rx and tx rings */
-
- if (!(rx_ring = memalign (sizeof (struct rx_desc_3com) * NUM_RX_DESC, 16))) {
- PRINTF ("Cannot allocate memory for RX_RING.....\n");
- goto Done;
- }
-
- if (!(tx_ring = memalign (sizeof (struct tx_desc_3com) * NUM_TX_DESC, 16))) {
- PRINTF ("Cannot allocate memory for TX_RING.....\n");
- goto Done;
- }
-
-Done:
- return status;
-}
-
-
-static int eth_3com_init (struct eth_device *dev, bd_t * bis)
-{
- int i, status = 0;
- int tx_cur, loop;
- u16 status_enable, intr_enable;
- struct descriptor *ias_cmd;
-
- /* Determine what type of network the machine is connected to */
- /* presently drops the connect to 10Mbps */
-
- if (!auto_negotiate (dev)) {
- printf ("Error: Cannot determine network media.\n");
- goto Done;
- }
-
- issue_and_wait (dev, TxReset);
- issue_and_wait (dev, RxReset | 0x04);
-
- /* Switch to register set 7 for normal use. */
- EL3WINDOW (dev, 7);
-
- /* Initialize Rx and Tx rings */
-
- init_rx_ring (dev);
- purge_tx_ring (dev);
-
- ETH_CMD (dev, SetRxFilter | RxStation | RxBroadcast | RxProm);
-
- issue_and_wait (dev, SetTxStart | 0x07ff);
-
- /* Below sets which indication bits to be seen. */
-
- status_enable =
- SetStatusEnb | HostError | DownComplete | UpComplete | (1 <<
- 6);
- ETH_CMD (dev, status_enable);
-
- /* Below sets no bits are to cause an interrupt since this is just polling */
-
- intr_enable = SetIntrEnb;
-/* intr_enable = SetIntrEnb | (1<<9) | (1<<10) | (1<<6); */
- ETH_CMD (dev, intr_enable);
- ETH_OUTB (dev, 127, UpPoll);
-
- /* Ack all pending events, and set active indicator mask */
-
- ETH_CMD (dev, AckIntr | IntLatch | TxAvailable | RxEarly | IntReq);
- ETH_CMD (dev, intr_enable);
-
- /* Tell the adapter where the RX ring is located */
-
- issue_and_wait (dev, UpStall); /* Stall and set the UplistPtr */
- ETH_OUTL (dev, (u32) & rx_ring[rx_next], UpListPtr);
- ETH_CMD (dev, RxEnable); /* Enable the receiver. */
- issue_and_wait (dev, UpUnstall);
-
- /* Send the Individual Address Setup frame */
-
- tx_cur = tx_next;
- tx_next = ((tx_next + 1) % NUM_TX_DESC);
-
- ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
- ias_cmd->status = cpu_to_le32 (1 << 31); /* set DnIndicate bit. */
- ias_cmd->next = 0;
- ias_cmd->addr = cpu_to_le32 ((u32) dev->enetaddr);
- ias_cmd->length = cpu_to_le32 (6 | LAST_FRAG);
-
- /* Tell the adapter where the TX ring is located */
-
- ETH_CMD (dev, TxEnable); /* Enable transmitter. */
- issue_and_wait (dev, DownStall); /* Stall and set the DownListPtr. */
- ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr);
- issue_and_wait (dev, DownUnstall);
- for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
- if (i >= TOUT_LOOP) {
- PRINTF ("TX Ring status (Init): 0x%4x\n",
- le32_to_cpu (tx_ring[tx_cur].status));
- PRINTF ("ETH_STATUS: 0x%x\n", ETH_STATUS (dev));
- goto Done;
- }
- }
- if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */
- ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */
- issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */
- ETH_OUTL (dev, 0, DownListPtr);
- issue_and_wait (dev, DownUnstall);
- }
- status = 1;
-Done:
- return status;
-}
-
-int eth_3com_send (struct eth_device *dev, volatile void *packet, int length)
-{
- int i, status = 0;
- int tx_cur;
-
- if (length <= 0) {
- PRINTF ("eth: bad packet size: %d\n", length);
- goto Done;
- }
-
- tx_cur = tx_next;
- tx_next = (tx_next + 1) % NUM_TX_DESC;
-
- tx_ring[tx_cur].status = cpu_to_le32 (1 << 31); /* set DnIndicate bit */
- tx_ring[tx_cur].next = 0;
- tx_ring[tx_cur].addr = cpu_to_le32 (((u32) packet));
- tx_ring[tx_cur].length = cpu_to_le32 (length | LAST_FRAG);
-
- /* Send the packet */
-
- issue_and_wait (dev, DownStall); /* stall and set the DownListPtr */
- ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr);
- issue_and_wait (dev, DownUnstall);
-
- for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
- if (i >= TOUT_LOOP) {
- PRINTF ("TX Ring status (send): 0x%4x\n",
- le32_to_cpu (tx_ring[tx_cur].status));
- goto Done;
- }
- }
- if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */
- ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */
- issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */
- ETH_OUTL (dev, 0, DownListPtr);
- issue_and_wait (dev, DownUnstall);
- }
- status = 1;
-Done:
- return status;
-}
-
-void PrintPacket (uchar * packet, int length)
-{
- int loop;
- uchar *ptr;
-
- printf ("Printing packet of length %x.\n\n", length);
- ptr = packet;
- for (loop = 1; loop <= length; loop++) {
- printf ("%2x ", *ptr++);
- if ((loop % 40) == 0)
- printf ("\n");
- }
-}
-
-int eth_3com_recv (struct eth_device *dev)
-{
- u16 stat = 0;
- u32 status;
- int rx_prev, length = 0;
-
- while (!(ETH_STATUS (dev) & UpComplete)) /* wait on receipt of packet */
- ;
-
- status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */
-
- while (status & (1 << 15)) {
- /* A packet has been received */
-
- if (status & (1 << 15)) {
- /* A valid frame received */
-
- length = le32_to_cpu (rx_ring[rx_next].status) & 0x1fff; /* length is in bits 0 - 12 */
-
- /* Pass the packet up to the protocol layers */
-
- NetReceive ((uchar *)
- le32_to_cpu (rx_ring[rx_next].addr),
- length);
- rx_ring[rx_next].status = 0; /* clear the status word */
- ETH_CMD (dev, AckIntr | UpComplete);
- issue_and_wait (dev, UpUnstall);
- } else if (stat & HostError) {
- /* There was an error */
-
- printf ("Rx error status: 0x%4x\n", stat);
- init_rx_ring (dev);
- goto Done;
- }
-
- rx_prev = rx_next;
- rx_next = (rx_next + 1) % NUM_RX_DESC;
- stat = ETH_STATUS (dev); /* register status */
- status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */
- }
-Done:
- return length;
-}
-
-void eth_3com_halt (struct eth_device *dev)
-{
- if (!(dev->iobase)) {
- goto Done;
- }
-
- issue_and_wait (dev, DownStall); /* shut down transmit and receive */
- issue_and_wait (dev, UpStall);
- issue_and_wait (dev, RxDisable);
- issue_and_wait (dev, TxDisable);
-
-/* free(tx_ring); /###* release memory allocated to the DPD and UPD rings */
-/* free(rx_ring); */
-
-Done:
- return;
-}
-
-static void init_rx_ring (struct eth_device *dev)
-{
- int i;
-
- PRINTF ("Initializing rx_ring. rx_buffer = %p\n", rx_buffer);
- issue_and_wait (dev, UpStall);
-
- for (i = 0; i < NUM_RX_DESC; i++) {
- rx_ring[i].next =
- cpu_to_le32 (((u32) &
- rx_ring[(i + 1) % NUM_RX_DESC]));
- rx_ring[i].status = 0;
- rx_ring[i].addr = cpu_to_le32 (((u32) & rx_buffer[i][0]));
- rx_ring[i].length = cpu_to_le32 (PKTSIZE_ALIGN | LAST_FRAG);
- }
- rx_next = 0;
-}
-
-static void purge_tx_ring (struct eth_device *dev)
-{
- int i;
-
- PRINTF ("Purging tx_ring.\n");
-
- tx_next = 0;
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- tx_ring[i].next = 0;
- tx_ring[i].status = 0;
- tx_ring[i].addr = 0;
- tx_ring[i].length = 0;
- }
-}
-
-static void read_hw_addr (struct eth_device *dev, bd_t * bis)
-{
- u8 hw_addr[ETH_ALEN];
- unsigned int eeprom[0x40];
- unsigned int checksum = 0;
- int i, j, timer;
-
- /* First, try the env ... if that works, we're all done! */
- if (eth_getenv_enetaddr("ethaddr", hw_addr))
- goto Done;
-
- /* Read the station address from the EEPROM. */
-
- EL3WINDOW (dev, 0);
- for (i = 0; i < 0x40; i++) {
- ETH_OUTW (dev, EEPROM_Read + i, Wn0EepromCmd);
- /* Pause for at least 162 us. for the read to take place. */
- for (timer = 10; timer >= 0; timer--) {
- udelay (162);
- if ((ETH_INW (dev, Wn0EepromCmd) & 0x8000) == 0)
- break;
- }
- eeprom[i] = ETH_INW (dev, Wn0EepromData);
- }
-
- /* Checksum calculation. I'm not sure about this part and there seems to be a bug on the 3com side of things */
-
- for (i = 0; i < 0x21; i++)
- checksum ^= eeprom[i];
- checksum = (checksum ^ (checksum >> 8)) & 0xff;
-
- if (checksum != 0xbb)
- printf (" *** INVALID EEPROM CHECKSUM %4.4x *** \n",
- checksum);
-
- for (i = 0, j = 0; i < 3; i++) {
- hw_addr[j++] = (u8) ((eeprom[i + 10] >> 8) & 0xff);
- hw_addr[j++] = (u8) (eeprom[i + 10] & 0xff);
- }
-
- /* MAC Address is in window 2, write value from EEPROM to window 2 */
-
- EL3WINDOW (dev, 2);
- for (i = 0; i < 6; i++)
- ETH_OUTB (dev, hw_addr[i], i);
-
- for (j = 0; j < ETH_ALEN; j += 2) {
- hw_addr[j] = (u8) (ETH_INW (dev, j) & 0xff);
- hw_addr[j + 1] = (u8) ((ETH_INW (dev, j) >> 8) & 0xff);
- }
-
- /* Save the result in the environment */
- eth_setenv_enetaddr("ethaddr", hw_addr);
-
-Done:
- memcpy(dev->enetaddr, hw_addr, 6);
- return;
-}
+++ /dev/null
-#include <common.h>
-#include <flash.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-unsigned long flash_init(void)
-{
- int i;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = 0;
- flash_info[i].size = 0;
- }
-
-
- return 1;
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- return 1;
-}
-
-void flash_print_info(flash_info_t *info)
-{
- printf("No flashrom installed\n");
-}
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <flash.h>
-#include <asm/io.h>
-#include "memio.h"
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static ulong flash_get_size (ulong addr, flash_info_t *info);
-static int flash_get_offsets (ulong base, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_reset (ulong addr);
-
-int flash_xd_nest;
-
-static void flash_to_xd(void)
-{
- unsigned char x;
-
- flash_xd_nest ++;
-
- if (flash_xd_nest == 1)
- {
- DEBUGF("Flash on XD\n");
- x = pci_read_cfg_byte(0, 0, 0x74);
- pci_write_cfg_byte(0, 0, 0x74, x|1);
- }
-}
-
-static void flash_to_mem(void)
-{
- unsigned char x;
-
- flash_xd_nest --;
-
- if (flash_xd_nest == 0)
- {
- DEBUGF("Flash on memory bus\n");
- x = pci_read_cfg_byte(0, 0, 0x74);
- pci_write_cfg_byte(0, 0, 0x74, x&0xFE);
- }
-}
-
-unsigned long flash_init_old(void)
-{
- int i;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = 0;
- flash_info[i].size = 0;
- }
-
-
- return 1;
-}
-
-unsigned long flash_init (void)
-{
- unsigned int i;
- unsigned long flash_size = 0;
-
- flash_xd_nest = 0;
-
- flash_to_xd();
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = 0;
- flash_info[i].size = 0;
- }
-
- DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);
-
- flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);
-
- DEBUGF("## Flash bank size: %08lx\n", flash_size);
-
- if (flash_size) {
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
- CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- } else {
- puts ("Warning: the BOOT Flash is not initialised !");
- }
-
- flash_to_mem();
-
- return flash_size;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (ulong addr, flash_info_t *info)
-{
- short i;
- uchar value;
- uchar *x = (uchar *)addr;
-
- flash_to_xd();
-
- /* Write auto select command: read Manufacturer ID */
- x[0x0555] = 0xAA;
- __asm__ volatile ("sync\n eieio");
- x[0x02AA] = 0x55;
- __asm__ volatile ("sync\n eieio");
- x[0x0555] = 0x90;
- __asm__ volatile ("sync\n eieio");
-
- value = x[0];
- __asm__ volatile ("sync\n eieio");
-
- DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value);
-
- switch (value | (value << 16)) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
-
- case STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- flash_reset (addr);
- return 0;
- }
-
- value = x[1];
- __asm__ volatile ("sync\n eieio");
-
- DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value);
-
- switch (value) {
- case AMD_ID_F040B:
- DEBUGF("Am29F040B\n");
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case AMD_ID_LV040B:
- DEBUGF("Am29LV040B\n");
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case AMD_ID_LV400T:
- DEBUGF("Am29LV400T\n");
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- DEBUGF("Am29LV400B\n");
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- DEBUGF("Am29LV800T\n");
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- DEBUGF("Am29LV400B\n");
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- DEBUGF("Am29LV160T\n");
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- DEBUGF("Am29LV160B\n");
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV320T:
- DEBUGF("Am29LV320T\n");
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
-#if 0
- /* Has the same ID as AMD_ID_LV320T, to be fixed */
- case AMD_ID_LV320B:
- DEBUGF("Am29LV320B\n");
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
-
- case AMD_ID_LV033C:
- DEBUGF("Am29LV033C\n");
- info->flash_id += FLASH_AM033C;
- info->sector_count = 64;
- info->size = 0x01000000;
- break; /* => 16Mb */
-
- case STM_ID_F040B:
- DEBUGF("M29F040B\n");
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- flash_reset (addr);
- flash_to_mem();
- return (0); /* => no or unknown flash */
-
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- if (! flash_get_offsets (addr, info)) {
- flash_reset (addr);
- flash_to_mem();
- return 0;
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- value = in8(info->start[i] + 2);
- iobarrier_rw();
- info->protect[i] = (value & 1) != 0;
- }
-
- /*
- * Reset bank to read mode
- */
- flash_reset (addr);
-
- flash_to_mem();
-
- return (info->size);
-}
-
-static int flash_get_offsets (ulong base, flash_info_t *info)
-{
- unsigned int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- /* set sector offsets for uniform sector type */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + i * info->size /
- info->sector_count;
- }
- break;
- default:
- return 0;
- }
-
- return 1;
-}
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile ulong addr = info->start[0];
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- flash_to_xd();
-
- if (s_first < 0 || s_first > s_last) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- flash_to_mem();
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- flash_to_mem();
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- out8(addr + 0x555, 0xAA);
- iobarrier_rw();
- out8(addr + 0x2AA, 0x55);
- iobarrier_rw();
- out8(addr + 0x555, 0x80);
- iobarrier_rw();
- out8(addr + 0x555, 0xAA);
- iobarrier_rw();
- out8(addr + 0x2AA, 0x55);
- iobarrier_rw();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = info->start[sect];
- out8(addr, 0x30);
- iobarrier_rw();
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = info->start[l_sect];
-
- DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);
-
- while ((in8(addr) & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- flash_reset (info->start[0]);
- flash_to_mem();
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- iobarrier_rw();
- }
-
-DONE:
- /* reset to read mode */
- flash_reset (info->start[0]);
- flash_to_mem();
-
- printf (" done\n");
- return 0;
-}
-
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- flash_to_xd();
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- flash_to_mem();
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- flash_to_mem();
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- flash_to_mem();
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
-
- flash_to_mem();
- return (write_word(info, wp, data));
-}
-
-/*
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile ulong addr = info->start[0];
- ulong start;
- int i;
-
- flash_to_xd();
-
- /* Check if Flash is (sufficiently) erased */
- if ((in32(dest) & data) != data) {
- flash_to_mem();
- return (2);
- }
-
- /* write each byte out */
- for (i = 0; i < 4; i++) {
- char *data_ch = (char *)&data;
- int flag = disable_interrupts();
-
- out8(addr + 0x555, 0xAA);
- iobarrier_rw();
- out8(addr + 0x2AA, 0x55);
- iobarrier_rw();
- out8(addr + 0x555, 0xA0);
- iobarrier_rw();
- out8(dest+i, data_ch[i]);
- iobarrier_rw();
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- flash_reset (addr);
- flash_to_mem();
- return (1);
- }
- iobarrier_rw();
- }
- }
-
- flash_reset (addr);
- flash_to_mem();
- return (0);
-}
-
-/*
- * Reset bank to read mode
- */
-static void flash_reset (ulong addr)
-{
- flash_to_xd();
- out8(addr, 0xF0); /* reset bank */
- iobarrier_rw();
- flash_to_mem();
-}
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_STM: printf ("SGS THOMSON "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- if (info->size % 0x100000 == 0) {
- printf (" Size: %ld MB in %d Sectors\n",
- info->size / 0x100000, info->sector_count);
- } else if (info->size % 0x400 == 0) {
- printf (" Size: %ld KB in %d Sectors\n",
- info->size / 0x400, info->sector_count);
- } else {
- printf (" Size: %ld B in %d Sectors\n",
- info->size, info->sector_count);
- }
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * John W. Linville, linville@tuxdriver.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "i8259.h"
-
-#undef IRQ_DEBUG
-
-#ifdef IRQ_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-static inline unsigned char read_byte(volatile unsigned char* from)
-{
- int x;
- asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
- return (unsigned char)x;
-}
-
-static inline void write_byte(volatile unsigned char *to, int x)
-{
- asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline unsigned long read_long_little(volatile unsigned long *from)
-{
- unsigned long x;
- asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from));
- return (unsigned long)x;
-}
-
-#ifdef out8
-#undef out8
-#endif
-
-#ifdef in8
-#undef in8
-#endif
-
-#define out8(addr, byte) write_byte(0xFE000000 | addr, byte)
-#define in8(addr) read_byte(0xFE000000 | addr)
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-static char cached_imr[2] = {0xff, 0xff};
-
-#define cached_imr1 (cached_imr[0])
-#define cached_imr2 (cached_imr[1])
-
-void i8259_init(void)
-{
- char dummy;
- PRINTF("Initializing Interrupt controller\n");
- /* init master interrupt controller */
- out8(0x20, 0x11); /* 0x19); /###* Start init sequence */
- out8(0x21, 0x00); /* Vector base */
- out8(0x21, 0x04); /* edge tiggered, Cascade (slave) on IRQ2 */
- out8(0x21, 0x11); /* was: 0x01); /###* Select 8086 mode */
-
- /* init slave interrupt controller */
- out8(0xA0, 0x11); /* 0x19); /###* Start init sequence */
- out8(0xA1, 0x08); /* Vector base */
- out8(0xA1, 0x02); /* edge triggered, Cascade (slave) on IRQ2 */
- out8(0xA1, 0x11); /* was: 0x01); /###* Select 8086 mode */
-
- /* always read ISR */
- out8(0x20, 0x0B);
- dummy = in8(ISR_1);
- out8(0xA0, 0x0B);
- dummy = in8(ISR_2);
-
-/* out8(0x43, 0x30); */
-/* out8(0x40, 0); */
-/* out8(0x40, 0); */
-/* out8(0x43, 0x70); */
-/* out8(0x41, 0); */
-/* out8(0x41, 0); */
-/* out8(0x43, 0xb0); */
-/* out8(0x42, 0); */
-/* out8(0x42, 0); */
-
- /* Mask all interrupts */
- out8(IMR_2, cached_imr2);
- out8(IMR_1, cached_imr1);
-
- i8259_unmask_irq(2);
-#if 0
- {
- int i;
- for (i=0; i<16; i++)
- {
- i8259_unmask_irq(i);
- }
- }
-#endif
-}
-
-static volatile char *pci_intack = (void *)0xFEF00000;
-
-int i8259_irq(void)
-{
- int irq;
-
- irq = read_long_little(pci_intack) & 0xff;
- if (irq==7) {
- /*
- * This may be a spurious interrupt.
- *
- * Read the interrupt status register (ISR). If the most
- * significant bit is not set then there is no valid
- * interrupt.
- */
- if(~in8(0x20)&0x80) {
- irq = -1;
- }
- }
-
- return irq;
-}
-int i8259_get_irq(struct pt_regs *regs)
-{
- unsigned char irq;
-
- /*
- * Perform an interrupt acknowledge cycle on controller 1
- */
- out8(OCW3_1, 0x0C); /* prepare for poll */
- irq = in8(IPL_1) & 7;
- if (irq == 2) {
- /*
- * Interrupt is cascaded so perform interrupt
- * acknowledge on controller 2
- */
- out8(OCW3_2, 0x0C); /* prepare for poll */
- irq = (in8(IPL_2) & 7) + 8;
- if (irq == 15) {
- /*
- * This may be a spurious interrupt
- *
- * Read the interrupt status register. If the most
- * significant bit is not set then there is no valid
- * interrupt
- */
- out8(OCW3_2, 0x0b);
- if (~(in8(ISR_2) & 0x80)) {
- return -1;
- }
- }
- } else if (irq == 7) {
- /*
- * This may be a spurious interrupt
- *
- * Read the interrupt status register. If the most
- * significant bit is not set then there is no valid
- * interrupt
- */
- out8(OCW3_1, 0x0b);
- if (~(in8(ISR_1) & 0x80)) {
- return -1;
- }
- }
- return irq;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-void i8259_mask_and_ack(int irq)
-{
- if (irq > 7) {
- cached_imr2 |= (1 << (irq - 8));
- in8(IMR_2); /* DUMMY */
- out8(IMR_2, cached_imr2);
- out8(OCW2_2, 0x20); /* Non-specific EOI */
- out8(OCW2_1, 0x20); /* Non-specific EOI to cascade */
- } else {
- cached_imr1 |= (1 << irq);
- in8(IMR_1); /* DUMMY */
- out8(IMR_1, cached_imr1);
- out8(OCW2_1, 0x20); /* Non-specific EOI */
- }
-}
-
-void i8259_mask_irq(int irq)
-{
- if (irq & 8) {
- cached_imr2 |= (1 << (irq & 7));
- out8(IMR_2, cached_imr2);
- } else {
- cached_imr1 |= (1 << irq);
- out8(IMR_1, cached_imr1);
- }
-}
-
-void i8259_unmask_irq(int irq)
-{
- if (irq & 8) {
- cached_imr2 &= ~(1 << (irq & 7));
- out8(IMR_2, cached_imr2);
- } else {
- cached_imr1 &= ~(1 << irq);
- out8(IMR_1, cached_imr1);
- }
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * John W. Linville, linville@tuxdriver.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define ICW1_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
-#define ICW1_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
-#define ICW2_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
-#define ICW2_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
-#define ICW3_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
-#define ICW3_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
-#define ICW4_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
-#define ICW4_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
-#define OCW1_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
-#define OCW1_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
-#define OCW2_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
-#define OCW2_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
-#define OCW3_1 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
-#define OCW3_2 CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3
-
-#define IMR_1 OCW1_1
-#define IMR_2 OCW1_2
-
-#define ISR_1 ICW1_1
-#define ISR_2 ICW1_2
-
-#define IPL_1 ICW1_1
-#define IPL_2 ICW1_2
-
-extern void i8259_init(void);
-
-extern int i8259_get_irq(struct pt_regs *regs);
-
-extern void i8259_mask_and_ack(int irq);
-
-extern void i8259_mask_irq(int irq);
-
-extern void i8259_unmask_irq(int irq);
+++ /dev/null
-/*
- * (C) Copyright 2002
- * John W. Linville <linville@tuxdriver.com>
- *
- * Copied and modified from original code by Josh Huber. Original
- * copyright notice preserved below.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-#include "i8259.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-#define NR_IRQS 16
-
-void irq_alloc_init(void);
-long irq_alloc(long wanted);
-
-/****************************************************************************/
-
-unsigned decrementer_count; /* count value for 1e6/HZ microseconds */
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS];
-
-/****************************************************************************/
-
-static __inline__ unsigned long
-get_msr(void)
-{
- unsigned long msr;
-
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void
-set_msr(unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-static __inline__ unsigned long
-get_dec(void)
-{
- unsigned long val;
-
- asm volatile("mfdec %0" : "=r" (val) :);
- return val;
-}
-
-
-static __inline__ void
-set_dec(unsigned long val)
-{
- asm volatile("mtdec %0" : : "r" (val));
-}
-
-
-void
-enable_interrupts(void)
-{
- set_msr (get_msr() | MSR_EE);
-}
-
-/* returns flag if MSR_EE was set before */
-int
-disable_interrupts(void)
-{
- ulong msr;
-
- msr = get_msr();
- set_msr (msr & ~MSR_EE);
- return ((msr & MSR_EE) != 0);
-}
-
-/****************************************************************************/
-
-int interrupt_init (void)
-{
- extern void new_reset(void);
- extern void new_reset_end(void);
-#ifdef DEBUG
- puts("interrupt_init: setting decrementer_count\n");
-#endif
- decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
-#ifdef DEBUG
- puts("interrupt_init: setting actual decremter\n");
-#endif
- set_dec (get_tbclk() / CONFIG_SYS_HZ);
-
-#ifdef DEBUG
- puts("interrupt_init: clearing external interrupt table\n");
-#endif
- /* clear external interrupt table here */
- memset(irq_handlers, 0, sizeof(irq_handlers));
-
-#ifdef DEBUG
- puts("interrupt_init: initializing interrupt controller\n");
-#endif
- i8259_init();
-
-#ifdef DEBUG
- puts("Copying reset trampoline\n");
-#endif
- /* WARNING: Assmues that the first megabyte is CACHEINHIBIT! */
- memcpy((void *)0x100, new_reset, new_reset_end - new_reset);
-
-#ifdef DEBUG
- PRINTF("interrupt_init: enabling interrupts (msr = %08x)\n",
- get_msr());
-#endif
- set_msr (get_msr() | MSR_EE);
-
-#ifdef DEBUG
- PRINTF("interrupt_init: done. (msr = %08x)\n", get_msr());
-#endif
-
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void
-external_interrupt(struct pt_regs *regs)
-{
- extern int i8259_irq(void);
-
- int irq, unmask = 1;
-
- irq = i8259_irq(); /*i8259_get_irq(regs); */
-/* printf("irq = %d, handler at %p ack=%d\n", irq, irq_handlers[irq].handler, *(volatile unsigned char *)0xFEF00000); */
- i8259_mask_and_ack(irq);
-
- if (irq_handlers[irq].handler != NULL)
- (*irq_handlers[irq].handler)(irq_handlers[irq].arg);
- else {
- PRINTF ("\nBogus External Interrupt IRQ %d\n", irq);
- /*
- * turn off the bogus interrupt, otherwise it
- * might repeat forever
- */
- unmask = 0;
- }
-
- if (unmask) i8259_unmask_irq(irq);
-}
-
-volatile ulong timestamp = 0;
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void
-timer_interrupt(struct pt_regs *regs)
-{
- set_dec(decrementer_count);
- timestamp++;
-}
-
-/****************************************************************************/
-
-void
-reset_timer(void)
-{
- timestamp = 0;
-}
-
-ulong
-get_timer(ulong base)
-{
- return (timestamp - base);
-}
-
-void
-set_timer(ulong t)
-{
- timestamp = t;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void
-irq_install_handler(int irq, interrupt_handler_t *handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- PRINTF("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- PRINTF("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong)handler, (ulong)irq_handlers[irq].handler);
-
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- i8259_unmask_irq(irq);
-}
-
-void
-irq_free_handler(int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- PRINTF("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- i8259_mask_irq(irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
- puts("IRQ related functions are unimplemented currently.\n");
-}
+++ /dev/null
-
-#ifndef _MACROS_H
-#define _MACROS_H
-
- /*
- ** Load a long integer into a register
- */
- .macro liw reg, value
- lis \reg, \value@h
- ori \reg, \reg, \value@l
- .endm
-
-
- /*
- ** Generate config_addr request
- ** This macro expects the values in registers:
- ** r3 - bus
- ** r4 - devfn
- ** r5 - offset
- */
- .macro config_addr
- rlwinm r9, r5, 24, 0, 6
- rlwinm r8, r4, 16, 0, 31
- rlwinm r7, r3, 8, 0, 31
- or r9, r8, r9
- or r9, r7, r9
- ori r9, r9, 0x80
- liw r10, 0xfec00cf8
- stw r9, 0(r10)
- eieio
- sync
- .endm
-
-
- /*
- ** Generate config_data address
- */
- .macro config_data mask
- andi. r9, r5, \mask
- addi r9, r9, 0xcfc
- oris r9, r9, 0xfee0
- .endm
-
-
- /*
- ** Write a byte value to an output port
- */
- .macro outb port, value
- lis r2, 0xfe00
- li r0, \value
- stb r0, \port(r2)
- .endm
-
-
- /*
- ** Write a register byte value to an output port
- */
- .macro outbr port, value
- lis r2, 0xfe00
- stb \value, \port(r2)
- .endm
-
-
- /*
- ** Read a byte value from a port into a specified register
- */
- .macro inb reg, port
- lis r2, 0xfe00
- lbz \reg, \port(r2)
- .endm
-
-
- /*
- ** Write a byte to the SuperIO config area
- */
- .macro siowb offset, value
- li r3, 0
- li r4, (7<<3)
- li r5, \offset
- li r6, \value
- bl pci_write_cfg_byte
- .endm
-
-#endif
+++ /dev/null
-#include "macros.h"
-
-
- .globl pci_read_cfg_byte
-
-pci_read_cfg_byte:
- config_addr
- config_data 3
- eieio
- sync
- lbz r3, 0(r9)
- blr
-
-
- .globl pci_write_cfg_byte
-
-pci_write_cfg_byte:
- config_addr
- config_data 3
- stb r6, 0(r9)
- eieio
- sync
- blr
-
-
- .globl pci_read_cfg_word
-
-pci_read_cfg_word:
- config_addr
- config_data 2
- lhbrx r3, 0, r9
- eieio
- sync
- blr
-
-
- .globl pci_write_cfg_word
-
-pci_write_cfg_word:
- config_addr
- config_data 2
- sthbrx r6, 0, r9
- eieio
- sync
- blr
-
-
- .globl pci_read_cfg_long
-
-pci_read_cfg_long:
- config_addr
- config_data 0
- lwbrx r3, 0, r9
- eieio
- sync
- blr
-
-
- .globl pci_write_cfg_long
-
-pci_write_cfg_long:
- config_addr
- config_data 0
- stwbrx r6, 0, r9
- eieio
- sync
- blr
+++ /dev/null
-/*
- * Memory mapped IO
- *
- * (C) Copyright 2002
- * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- * You may also use this under a BSD license.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-
-#ifndef _MEMIO_H
-#define _MEMIO_H
-
-#include "short_types.h"
-
-#define IOBASE 0xFE000000
-
-#define in_byte(from) read_byte( (uint8 *)(IOBASE | (from)))
-#define in_word(from) read_word_little((uint16 *)(IOBASE | (from)))
-#define in_long(from) read_long_little((uint32 *)(IOBASE | (from)))
-#define out_byte(to, val) write_byte((uint8 *)(IOBASE | (to)), val)
-#define out_word(to, val) write_word_little((uint16 *)(IOBASE | (to)), val)
-#define out_long(to, val) write_long_little((uint32 *)(IOBASE | (to)), val)
-
-
-static inline uint8 read_byte(volatile uint8 *from)
-{
- int x;
- asm volatile ("lbz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from));
- return (uint8)x;
-}
-
-
-static inline void write_byte(volatile uint8 *to, uint8 x)
-{
- asm volatile ("stb %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x));
-}
-
-static inline uint16 read_word_little(volatile uint16 *from)
-{
- int x;
- asm volatile ("lhbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m" (*from));
- return (uint16)x;
-}
-
-static inline uint16 read_word_big(volatile uint16 *from)
-{
- int x;
- asm volatile ("lhz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from));
- return (uint16)x;
-}
-
-static inline void write_word_little(volatile uint16 *to, int x)
-{
- asm volatile ("sthbrx %1,0,%2\n eieio\n sync" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_word_big(volatile uint16 *to, int x)
-{
- asm volatile ("sth %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x));
-}
-
-static inline uint32 read_long_little(volatile uint32 *from)
-{
- unsigned long x;
- asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from));
- return (uint32)x;
-}
-
-static inline uint32 read_long_big(volatile uint32 *from)
-{
- unsigned long x;
- asm volatile ("lwz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from));
- return (uint32)x;
-}
-
-static inline void write_long_little(volatile uint32 *to, uint32 x)
-{
- asm volatile ("stwbrx %1,0,%2\n eieio\n sync" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_long_big(volatile uint32 *to, uint32 x)
-{
- asm volatile ("stw %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x));
-}
-
-#define CONFIG_ADDR(bus, devfn, offset) \
- write_long_big((uint32 *)0xFEC00CF8, \
- ((offset & 0xFC)<<24) | (devfn << 16) \
- | (bus<<8) | 0x80);
-#define CONFIG_DATA(offset,mask) ((void *)(0xFEE00CFC+(offset & mask)))
-
-
-uint8 pci_read_cfg_byte(int32 bus, int32 devfn, int32 offset);
-void pci_write_cfg_byte(int32 bus, int32 devfn, int32 offset, uint8 x);
-uint16 pci_read_cfg_word(int32 bus, int32 devfn, int32 offset);
-void pci_write_cfg_word(int32 bus, int32 devfn, int32 offset, uint16 x);
-uint32 pci_read_cfg_long(int32 bus, int32 devfn, int32 offset);
-void pci_write_cfg_long(int32 bus, int32 devfn, int32 offset, uint32 x);
-
-
-#endif
+++ /dev/null
-64 MB:
-0x00: 80 08 04 0c 09 01 40 00 01 a0 60 00 80 08 00 01
-0x10: 8f 04 04 01 01 00 06 a0 60 00 00 14 10 14 2d 10
-0x20: 20 10 20 10 00 00 00 00 00 00 00 00 00 00 00 00
-0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 f2
-0x40: 7f 61 00 00 00 00 00 00 46 04 00 ff ff ff ff ff
-0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
-0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 64 f4
-
-512 MB:
-0x00: 80 08 04 0d 0a 02 40 00 01 75 54 00 82 08 00 01
-0x10: 8f 04 04 01 01 00 0f 00 00 00 00 14 0f 14 2d 40
-0x20: 15 08 15 08 00 00 00 00 00 00 00 00 00 00 00 00
-0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 d2
-0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 fd
-
-256 MB:
-0x00: 80 08 04 0c 0a 02 40 00 01 75 54 00 80 08 00 01
-0x10: 8f 04 06 01 01 00 0e a0 60 00 00 14 0f 14 2d 20
-0x20: 15 08 15 08 00 00 00 00 00 00 00 00 00 00 00 00
-0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 b0
-0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 f6
-
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Thomas Frieden, Hyperion Entertainment
- * ThomasF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "memio.h"
-
-void enable_nvram(void)
-{
- pci_write_cfg_byte(0, 0, 0x56, 0x0b);
-}
-
-void disable_nvram(void)
-{
- pci_write_cfg_byte(0, 0, 0x56, 0x0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * John W. Linville, linville@tuxdriver.com
- *
- * Modified from code for support of MIP405 and PIP405 boards. Previous
- * copyright follows.
- *
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Source partly derived from:
- * linux/drivers/char/pc_keyb.c
- *
- *
- */
-#include <common.h>
-#include <asm/processor.h>
-#include <stdio_dev.h>
-#include "ps2kbd.h"
-
-
-unsigned char kbd_read_status(void);
-unsigned char kbd_read_input(void);
-void kbd_send_data(unsigned char data);
-void i8259_mask_irq(unsigned int irq);
-void i8259_unmask_irq(unsigned int irq);
-
-/* used only by send_data - set by keyboard_interrupt */
-
-
-#undef KBG_DEBUG
-
-#ifdef KBG_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-#define KBD_STAT_KOBF 0x01
-#define KBD_STAT_IBF 0x02
-#define KBD_STAT_SYS 0x04
-#define KBD_STAT_CD 0x08
-#define KBD_STAT_LOCK 0x10
-#define KBD_STAT_MOBF 0x20
-#define KBD_STAT_TI_OUT 0x40
-#define KBD_STAT_PARERR 0x80
-
-#define KBD_INIT_TIMEOUT 2000 /* Timeout in ms for initializing the keyboard */
-#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */
-#define KBD_TIMEOUT 2000 /* Timeout in ms for keyboard command acknowledge */
-/*
- * Keyboard Controller Commands
- */
-
-#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
-#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */
-#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */
-#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */
-#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */
-#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */
-#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */
-#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */
-#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */
-#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */
-#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if
- initiated by the auxiliary device */
-#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
-
-/*
- * Keyboard Commands
- */
-
-#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
-#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
-#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
-#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */
-#define KBD_CMD_RESET 0xFF /* Reset */
-
-/*
- * Keyboard Replies
- */
-
-#define KBD_REPLY_POR 0xAA /* Power on reset */
-#define KBD_REPLY_ACK 0xFA /* Command ACK */
-#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */
-
-/*
- * Status Register Bits
- */
-
-#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */
-#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */
-#define KBD_STAT_SELFTEST 0x04 /* Self test successful */
-#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */
-#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */
-#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */
-#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */
-#define KBD_STAT_PERR 0x80 /* Parity error */
-
-#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
-
-/*
- * Controller Mode Register Bits
- */
-
-#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */
-#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS 0x04 /* The system flag (?) */
-#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */
-#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */
-#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */
-#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
-#define KBD_MODE_RFU 0x80
-
-
-#define KDB_DATA_PORT 0x60
-#define KDB_COMMAND_PORT 0x64
-
-#define LED_SCR 0x01 /* scroll lock led */
-#define LED_CAP 0x04 /* caps lock led */
-#define LED_NUM 0x02 /* num lock led */
-
-#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
-
-
-static volatile char kbd_buffer[KBD_BUFFER_LEN];
-static volatile int in_pointer = 0;
-static volatile int out_pointer = 0;
-
-
-static unsigned char num_lock = 0;
-static unsigned char caps_lock = 0;
-static unsigned char scroll_lock = 0;
-static unsigned char shift = 0;
-static unsigned char ctrl = 0;
-static unsigned char alt = 0;
-static unsigned char e0 = 0;
-static unsigned char leds = 0;
-
-#define DEVNAME "ps2kbd"
-
-/* Simple translation table for the keys */
-
-static unsigned char kbd_plain_xlate[] = {
- 0xff,0x1b, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=','\b','\t', /* 0x00 - 0x0f */
- 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']','\r',0xff, 'a', 's', /* 0x10 - 0x1f */
- 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';','\'', '`',0xff,'\\', 'z', 'x', 'c', 'v', /* 0x20 - 0x2f */
- 'b', 'n', 'm', ',', '.', '/',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */
- 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */
- '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */
- '\r',0xff,0xff
- };
-
-static unsigned char kbd_shift_xlate[] = {
- 0xff,0x1b, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+','\b','\t', /* 0x00 - 0x0f */
- 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}','\r',0xff, 'A', 'S', /* 0x10 - 0x1f */
- 'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',0xff, '|', 'Z', 'X', 'C', 'V', /* 0x20 - 0x2f */
- 'B', 'N', 'M', '<', '>', '?',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */
- 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */
- '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */
- '\r',0xff,0xff
- };
-
-static unsigned char kbd_ctrl_xlate[] = {
- 0xff,0x1b, '1',0x00, '3', '4', '5',0x1E, '7', '8', '9', '0',0x1F, '=','\b','\t', /* 0x00 - 0x0f */
- 0x11,0x17,0x05,0x12,0x14,0x18,0x15,0x09,0x0f,0x10,0x1b,0x1d,'\n',0xff,0x01,0x13, /* 0x10 - 0x1f */
- 0x04,0x06,0x08,0x09,0x0a,0x0b,0x0c, ';','\'', '~',0x00,0x1c,0x1a,0x18,0x03,0x16, /* 0x20 - 0x2f */
- 0x02,0x0e,0x0d, '<', '>', '?',0xff,0xff,0xff,0x00,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */
- 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */
- '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */
- '\r',0xff,0xff
- };
-
-/******************************************************************
- * Init
- ******************************************************************/
-
-int isa_kbd_init (void)
-{
- char *result;
-
- result = kbd_initialize ();
- if (result != NULL) {
- result = kbd_initialize ();
- }
- if (result == NULL) {
- printf ("AT Keyboard initialized\n");
- irq_install_handler (KBD_INTERRUPT,
- (interrupt_handler_t *) kbd_interrupt,
- NULL);
- return (1);
- } else {
- printf ("%s\n", result);
- return (-1);
- }
-}
-
-#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-extern int overwrite_console (void);
-#else
-int overwrite_console (void)
-{
- return (0);
-}
-#endif
-
-int drv_isa_kbd_init (void)
-{
- int error;
- struct stdio_dev kbddev ;
- char *stdinname = getenv ("stdin");
-
- if(isa_kbd_init() == -1)
- return -1;
- memset (&kbddev, 0, sizeof(kbddev));
- strcpy(kbddev.name, DEVNAME);
- kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
- kbddev.putc = NULL ;
- kbddev.puts = NULL ;
- kbddev.getc = kbd_getc ;
- kbddev.tstc = kbd_testc ;
-
- error = stdio_register (&kbddev);
- if(error==0) {
- /* check if this is the standard input device */
- if(strcmp(stdinname,DEVNAME)==0) {
- /* reassign the console */
- if(overwrite_console()) {
- return 1;
- }
- error=console_assign(stdin,DEVNAME);
- if(error==0)
- return 1;
- else
- return error;
- }
- return 1;
- }
- return error;
-}
-
-/******************************************************************
- * Queue handling
- ******************************************************************/
-/* puts character in the queue and sets up the in and out pointer */
-void kbd_put_queue(char data)
-{
- if((in_pointer+1)==KBD_BUFFER_LEN) {
- if(out_pointer==0) {
- return; /* buffer full */
- } else{
- in_pointer=0;
- }
- } else {
- if((in_pointer+1)==out_pointer)
- return; /* buffer full */
- in_pointer++;
- }
- kbd_buffer[in_pointer]=data;
- return;
-}
-
-/* test if a character is in the queue */
-int kbd_testc(void)
-{
- if(in_pointer==out_pointer)
- return(0); /* no data */
- else
- return(1);
-}
-/* gets the character from the queue */
-int kbd_getc(void)
-{
- char c;
-
- while(in_pointer==out_pointer);
- if((out_pointer+1)==KBD_BUFFER_LEN)
- out_pointer=0;
- else
- out_pointer++;
- c=kbd_buffer[out_pointer];
- return (int)c;
-
-}
-
-/* set LEDs */
-
-void kbd_set_leds(void)
-{
- if(caps_lock==0)
- leds&=~LED_CAP; /* switch caps_lock off */
- else
- leds|=LED_CAP; /* switch on LED */
- if(num_lock==0)
- leds&=~LED_NUM; /* switch LED off */
- else
- leds|=LED_NUM; /* switch on LED */
- if(scroll_lock==0)
- leds&=~LED_SCR; /* switch LED off */
- else
- leds|=LED_SCR; /* switch on LED */
- kbd_send_data(KBD_CMD_SET_LEDS);
- kbd_send_data(leds);
-}
-
-void handle_keyboard_event (unsigned char scancode)
-{
- unsigned char keycode;
-
- /* Convert scancode to keycode */
- PRINTF ("scancode %x\n", scancode);
- if (scancode == 0xe0) {
- e0 = 1; /* special charakters */
- return;
- }
- if (e0 == 1) {
- e0 = 0; /* delete flag */
- if (!(((scancode & 0x7F) == 0x38) || /* the right ctrl key */
- ((scancode & 0x7F) == 0x1D) || /* the right alt key */
- ((scancode & 0x7F) == 0x35) || /* the right '/' key */
- ((scancode & 0x7F) == 0x1C) || /* the right enter key */
- ((scancode) == 0x48) || /* arrow up */
- ((scancode) == 0x50) || /* arrow down */
- ((scancode) == 0x4b) || /* arrow left */
- ((scancode) == 0x4d)))
- /* arrow right */
- /* we swallow unknown e0 codes */
- return;
- }
- /* special cntrl keys */
- switch (scancode) {
- case 0x48:
- kbd_put_queue (27);
- kbd_put_queue (91);
- kbd_put_queue ('A');
- return;
- case 0x50:
- kbd_put_queue (27);
- kbd_put_queue (91);
- kbd_put_queue ('B');
- return;
- case 0x4b:
- kbd_put_queue (27);
- kbd_put_queue (91);
- kbd_put_queue ('D');
- return;
- case 0x4D:
- kbd_put_queue (27);
- kbd_put_queue (91);
- kbd_put_queue ('C');
- return;
- case 0x58: /* F12 key */
- if (ctrl == 1) {
- extern int console_changed;
-
- setenv ("stdin", DEVNAME);
- setenv ("stdout", "vga");
- console_changed = 1;
- }
- return;
- case 0x2A:
- case 0x36: /* shift pressed */
- shift = 1;
- return; /* do nothing else */
- case 0xAA:
- case 0xB6: /* shift released */
- shift = 0;
- return; /* do nothing else */
- case 0x38: /* alt pressed */
- alt = 1;
- return; /* do nothing else */
- case 0xB8: /* alt released */
- alt = 0;
- return; /* do nothing else */
- case 0x1d: /* ctrl pressed */
- ctrl = 1;
- return; /* do nothing else */
- case 0x9d: /* ctrl released */
- ctrl = 0;
- return; /* do nothing else */
- case 0x46: /* scrollock pressed */
- scroll_lock = ~scroll_lock;
- kbd_set_leds ();
- return; /* do nothing else */
- case 0x3A: /* capslock pressed */
- caps_lock = ~caps_lock;
- kbd_set_leds ();
- return;
- case 0x45: /* numlock pressed */
- num_lock = ~num_lock;
- kbd_set_leds ();
- return;
- case 0xC6: /* scroll lock released */
- case 0xC5: /* num lock released */
- case 0xBA: /* caps lock released */
- return; /* just swallow */
- }
- if ((scancode & 0x80) == 0x80) /* key released */
- return;
- /* now, decide which table we need */
- if (scancode > (sizeof (kbd_plain_xlate) / sizeof (kbd_plain_xlate[0]))) { /* scancode not in list */
- PRINTF ("unkown scancode %X\n", scancode);
- return; /* swallow it */
- }
- /* setup plain code first */
- keycode = kbd_plain_xlate[scancode];
- if (caps_lock == 1) { /* caps_lock is pressed, overwrite plain code */
- if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */
- PRINTF ("unkown caps-locked scancode %X\n", scancode);
- return; /* swallow it */
- }
- keycode = kbd_shift_xlate[scancode];
- if (keycode < 'A') { /* we only want the alphas capital */
- keycode = kbd_plain_xlate[scancode];
- }
- }
- if (shift == 1) { /* shift overwrites caps_lock */
- if (scancode > (sizeof (kbd_shift_xlate) / sizeof (kbd_shift_xlate[0]))) { /* scancode not in list */
- PRINTF ("unkown shifted scancode %X\n", scancode);
- return; /* swallow it */
- }
- keycode = kbd_shift_xlate[scancode];
- }
- if (ctrl == 1) { /* ctrl overwrites caps_lock and shift */
- if (scancode > (sizeof (kbd_ctrl_xlate) / sizeof (kbd_ctrl_xlate[0]))) { /* scancode not in list */
- PRINTF ("unkown ctrl scancode %X\n", scancode);
- return; /* swallow it */
- }
- keycode = kbd_ctrl_xlate[scancode];
- }
- /* check if valid keycode */
- if (keycode == 0xff) {
- PRINTF ("unkown scancode %X\n", scancode);
- return; /* swallow unknown codes */
- }
-
- kbd_put_queue (keycode);
- PRINTF ("%x\n", keycode);
-}
-
-/*
- * This reads the keyboard status port, and does the
- * appropriate action.
- *
- */
-unsigned char handle_kbd_event (void)
-{
- unsigned char status = kbd_read_status ();
- unsigned int work = 10000;
-
- while ((--work > 0) && (status & KBD_STAT_OBF)) {
- unsigned char scancode;
-
- scancode = kbd_read_input ();
-
- /* Error bytes must be ignored to make the
- Synaptics touchpads compaq use work */
- /* Ignore error bytes */
- if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
- if (status & KBD_STAT_MOUSE_OBF); /* not supported: handle_mouse_event(scancode); */
- else
- handle_keyboard_event (scancode);
- }
- status = kbd_read_status ();
- }
- if (!work)
- PRINTF ("pc_keyb: controller jammed (0x%02X).\n", status);
- return status;
-}
-
-/******************************************************************************
- * Lowlevel Part of keyboard section
- */
-unsigned char kbd_read_status(void)
-{
- return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
-}
-
-unsigned char kbd_read_input(void)
-{
- return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
-}
-
-void kbd_write_command(unsigned char cmd)
-{
- out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
-}
-
-void kbd_write_output(unsigned char data)
-{
- out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
-}
-
-int kbd_read_data(void)
-{
- int val;
- unsigned char status;
-
- val = -1;
- status = kbd_read_status();
- if (status & KBD_STAT_OBF) {
- val = kbd_read_input();
- if (status & (KBD_STAT_GTO | KBD_STAT_PERR))
- val = -2;
- }
- return val;
-}
-
-int kbd_wait_for_input (void)
-{
- unsigned long timeout;
- int val;
-
- timeout = KBD_TIMEOUT;
- val = kbd_read_data ();
- while (val < 0) {
- if (timeout-- == 0)
- return -1;
- udelay (1000);
- val = kbd_read_data ();
- }
- return val;
-}
-
-
-int kb_wait (void)
-{
- unsigned long timeout = KBC_TIMEOUT * 10;
-
- do {
- unsigned char status = handle_kbd_event ();
-
- if (!(status & KBD_STAT_IBF))
- return 0; /* ok */
- udelay (1000);
- timeout--;
- } while (timeout);
- return 1;
-}
-
-void kbd_write_command_w (int data)
-{
- if (kb_wait ())
- PRINTF ("timeout in kbd_write_command_w\n");
- kbd_write_command (data);
-}
-
-void kbd_write_output_w (int data)
-{
- if (kb_wait ())
- PRINTF ("timeout in kbd_write_output_w\n");
- kbd_write_output (data);
-}
-
-void kbd_send_data (unsigned char data)
-{
- unsigned char status;
-
- i8259_mask_irq (KBD_INTERRUPT); /* disable interrupt */
- kbd_write_output_w (data);
- status = kbd_wait_for_input ();
- if (status == KBD_REPLY_ACK)
- i8259_unmask_irq (KBD_INTERRUPT); /* enable interrupt */
-}
-
-
-char *kbd_initialize (void)
-{
- int status;
-
- in_pointer = 0; /* delete in Buffer */
- out_pointer = 0;
- /*
- * Test the keyboard interface.
- * This seems to be the only way to get it going.
- * If the test is successful a x55 is placed in the input buffer.
- */
- kbd_write_command_w (KBD_CCMD_SELF_TEST);
- if (kbd_wait_for_input () != 0x55)
- return "Kbd: failed self test";
- /*
- * Perform a keyboard interface test. This causes the controller
- * to test the keyboard clock and data lines. The results of the
- * test are placed in the input buffer.
- */
- kbd_write_command_w (KBD_CCMD_KBD_TEST);
- if (kbd_wait_for_input () != 0x00)
- return "Kbd: interface failed self test";
- /*
- * Enable the keyboard by allowing the keyboard clock to run.
- */
- kbd_write_command_w (KBD_CCMD_KBD_ENABLE);
- status = kbd_wait_for_input ();
- /*
- * Reset keyboard. If the read times out
- * then the assumption is that no keyboard is
- * plugged into the machine.
- * This defaults the keyboard to scan-code set 2.
- *
- * Set up to try again if the keyboard asks for RESEND.
- */
- do {
- kbd_write_output_w (KBD_CMD_RESET);
- status = kbd_wait_for_input ();
- if (status == KBD_REPLY_ACK)
- break;
- if (status != KBD_REPLY_RESEND) {
- PRINTF ("status: %X\n", status);
- return "Kbd: reset failed, no ACK";
- }
- } while (1);
- if (kbd_wait_for_input () != KBD_REPLY_POR)
- return "Kbd: reset failed, no POR";
-
- /*
- * Set keyboard controller mode. During this, the keyboard should be
- * in the disabled state.
- *
- * Set up to try again if the keyboard asks for RESEND.
- */
- do {
- kbd_write_output_w (KBD_CMD_DISABLE);
- status = kbd_wait_for_input ();
- if (status == KBD_REPLY_ACK)
- break;
- if (status != KBD_REPLY_RESEND)
- return "Kbd: disable keyboard: no ACK";
- } while (1);
-
- kbd_write_command_w (KBD_CCMD_WRITE_MODE);
- kbd_write_output_w (KBD_MODE_KBD_INT
- | KBD_MODE_SYS
- | KBD_MODE_DISABLE_MOUSE | KBD_MODE_KCC);
-
- /* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
- kbd_write_command_w (KBD_CCMD_READ_MODE);
- if (!(kbd_wait_for_input () & KBD_MODE_KCC)) {
- /*
- * If the controller does not support conversion,
- * Set the keyboard to scan-code set 1.
- */
- kbd_write_output_w (0xF0);
- kbd_wait_for_input ();
- kbd_write_output_w (0x01);
- kbd_wait_for_input ();
- }
- kbd_write_output_w (KBD_CMD_ENABLE);
- if (kbd_wait_for_input () != KBD_REPLY_ACK)
- return "Kbd: enable keyboard: no ACK";
-
- /*
- * Finally, set the typematic rate to maximum.
- */
- kbd_write_output_w (KBD_CMD_SET_RATE);
- if (kbd_wait_for_input () != KBD_REPLY_ACK)
- return "Kbd: Set rate: no ACK";
- kbd_write_output_w (0x00);
- if (kbd_wait_for_input () != KBD_REPLY_ACK)
- return "Kbd: Set rate: no ACK";
- return NULL;
-}
-
-void kbd_interrupt(void)
-{
- handle_kbd_event();
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * John W. Linville, linville@tuxdriver.com
- *
- * Modified from code for support of MIP405 and PIP405 boards. Previous
- * copyright follows.
- *
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef _KBD_H_
-#define _KBD_H_
-
-extern int kbd_testc(void);
-extern int kbd_getc(void);
-extern void kbd_interrupt(void);
-extern char *kbd_initialize(void);
-
-unsigned char kbd_is_init(void);
-#define KBD_INTERRUPT 1
-#endif
+++ /dev/null
-#include <common.h>
-#include <ns16550.h>
-#include "short_types.h"
-#include "memio.h"
-#include "articiaS.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_NS16550
-static uint32 ComPort1;
-
-uint16 SerialEcho = 1;
-
-
-#define RECEIVER_HOLDING 0
-#define TRANSMITTER_HOLDING 0
-#define INTERRUPT_ENABLE 1
-#define INTERRUPT_STATUS 2
-#define FIFO_CONTROL 2
-#define LINE_CONTROL 3
-#define MODEM_CONTROL 4
-#define LINE_STATUS 5
-#define MODEM_STATUS 6
-#define SCRATCH_PAD 7
-
-#define DIVISOR_LATCH_LSB 0
-#define DIVISOR_LATCH_MSB 1
-#define PRESCALER_DIVISION 5
-
-#define COM_WRITE_BYTE(reg, byte) out_byte((ComPort1+reg), byte)
-#define COM_READ_BYTE(reg) in_byte((ComPort1+reg))
-
-static int serial_init_done = 0;
-
-void serial_init (void)
-{
-#if 0
- uint32 clock_divisor = 115200 / baudrate;
- uint8 cfg;
- uint8 a;
- uint16 devfn = 7 << 3;
-
- if (serial_init_done)
- return;
-
- /* Enter configuration mode */
- cfg = pci_read_cfg_byte (0, devfn, 0x85);
- pci_write_cfg_byte (0, devfn, 0x85, cfg | 0x02);
-
- /* Set serial port COM1 as 3F8 */
- out_byte (0x3F0, 0xE7);
- out_byte (0x3f1, 0xfe);
-
- /* Set serial port COM2 as 2F8 */
- out_byte (0x3f0, 0xe8);
- out_byte (0x3f1, 0xeb);
-
- /* Enable */
- out_byte (0x3f0, 0xe2);
- a = in_byte (0x3f1);
- a |= 0xc;
- out_byte (0x3f0, 0xe2);
- out_byte (0x3f1, a);
-
- /* Reset the configuration mode */
- pci_write_cfg_byte (0, devfn, 0x85, cfg);
-#endif
-
- ComPort1 = 0x3F8;
-
- /* Disable interrupts */
- COM_WRITE_BYTE (INTERRUPT_ENABLE, 0x00);
-
- /* Set baud rate */
- /* COM_WRITE_BYTE(LINE_CONTROL, 0x83); */
- /* COM_WRITE_BYTE(DIVISOR_LATCH_LSB, (uint8)(clock_divisor & 0xFF)); */
- /* COM_WRITE_BYTE(DIVISOR_LATCH_MSB, (uint8)(clock_divisor >> 8)); */
- /* __asm__("eieio"); */
-
- /* Set 8-N-1 */
- COM_WRITE_BYTE (LINE_CONTROL, 0x03);
- __asm__ ("eieio");
-
- /* Disable FIFO */
- COM_WRITE_BYTE (MODEM_CONTROL, 0x03);
- COM_WRITE_BYTE (FIFO_CONTROL, 0x07);
-
- __asm__ ("eieio");
- serial_init_done = 1;
-}
-
-extern int console_changed;
-
-void serial_putc (const char sendme)
-{
- if (sendme == '\n') {
- while ((in_byte (0x3FD) & 0x40) == 0);
- out_byte (0x3f8, 0x0D);
- }
-
- while ((in_byte (0x3FD) & 0x40) == 0);
- out_byte (0x3f8, sendme);
-}
-
-int serial_getc (void)
-{
-#if 0
- uint8 c;
-
- for (;;) {
- uint8 x = in_byte (0x3FD);
-
- if (x & 0x01)
- break;
-
- if (x & 0x0C)
- out_byte (0x3fd, 0x0c);
- }
-
- c = in_byte (0x3F8);
-
- return c;
-#else
- while ((in_byte (0x3FD) & 0x01) == 0) {
- if (console_changed != 0) {
- printf ("Console changed\n");
- console_changed = 0;
- return 0;
- }
- }
- return in_byte (0x3F8);
-#endif
-}
-
-int serial_tstc (void)
-{
- return (in_byte (0x03FD) & 0x01) != 0;
-}
-
-void serial_debug_putc (int c)
-{
- serial_puts ("DBG");
- serial_putc (c);
- serial_putc (0x0d);
- serial_putc (0x0A);
-}
-
-#else
-
-const NS16550_t Com0 = (NS16550_t) CONFIG_SYS_NS16550_COM1;
-const NS16550_t Com1 = (NS16550_t) CONFIG_SYS_NS16550_COM2;
-
-int serial_init (void)
-{
- uint32 clock_divisor = 115200 / gd->baudrate;
-
- NS16550_init (Com0, clock_divisor);
- /* NS16550_reinit(Com1, clock_divisor); */
- /* serial_puts("COM1: 3F8h initalized"); */
-
- return (0);
-}
-
-#if 0
-void serial_putc (const char c)
-{
- NS16550_putc (Com0, c);
- if (c == '\n')
- NS16550_putc (Com0, 0x0D);
-}
-
-int serial_getc (void)
-{
- return (int) NS16550_getc (Com0);
-}
-
-int serial_tstc (void)
-{
- return NS16550_tstc (Com0);
-}
-#else
-void serial_putc (const char sendme)
-{
- if (sendme == '\n') {
- while ((in_byte (0x3FD) & 0x40) == 0);
- out_byte (0x3f8, 0x0D);
- }
-
- while ((in_byte (0x3FD) & 0x40) == 0);
- out_byte (0x3f8, sendme);
-}
-
-
-extern int console_changed;
-
-int serial_getc (void)
-{
-#if 0
- uint8 c;
-
- for (;;) {
- uint8 x = in_byte (0x3FD);
-
- if (x & 0x01)
- break;
-
- if (x & 0x0C)
- out_byte (0x3fd, 0x0c);
- }
-
- c = in_byte (0x3F8);
-
- return c;
-#else
- while ((in_byte (0x3FD) & 0x01) == 0) {
- if (console_changed != 0) {
- console_changed = 0;
- return 0;
- }
- }
-
- return in_byte (0x3F8);
-#endif
-}
-
-int serial_tstc (void)
-{
- return (in_byte (0x03FD) & 0x01) != 0;
-}
-#endif
-
-#endif
-
-void serial_puts (const char *string)
-{
- while (*string)
- serial_putc (*string++);
-}
-
-void serial_setbrg (void)
-{
- uint32 clock_divisor = 115200 / gd->baudrate;
-
- NS16550_init (Com0, clock_divisor);
-}
+++ /dev/null
-/*
- * short type names
- *
- * (C) Copyright 2002
- * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SHORT_TYPES_H
-#define _SHORT_TYPES_H
-
-typedef unsigned long uint32;
-typedef long int32;
-typedef unsigned short uint16;
-typedef short int16;
-typedef unsigned char uint8;
-typedef signed char int8;
-
-#endif
+++ /dev/null
-#include "memio.h"
-#include "articiaS.h"
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-
-void sm_write_mode(void)
-{
- out_byte(0xA539, 0x00);
- out_byte(0xA53A, 0x03);
-}
-
-void sm_read_mode(void)
-{
- out_byte(0xA53A, 0x02);
- out_byte(0xA539, 0x02);
-}
-
-void sm_write_byte(uint8 writeme)
-{
- int i;
- int level;
-
- out_byte(0xA539, 0x00);
-
- level = 0;
-
- for (i=0; i<8; i++)
- {
- if ((writeme & 0x80) == (level<<7))
- {
- /* Bit did not change, rewrite strobe */
- out_byte(0xA539, level | 0x02);
- out_byte(0xA539, level);
- }
- else
- {
- /* Bit changed, set bit, then strobe */
- level = (writeme & 0x80) >> 7;
- out_byte(0xA539, level);
- out_byte(0xA539, level | 0x02);
- out_byte(0xA539, level);
- }
- writeme <<= 1;
- }
- out_byte(0xA539, 0x00);
-}
-
-uint8 sm_read_byte(void)
-{
- uint8 retme, r;
- int i;
-
- retme = 0;
- for (i=0; i<8; i++)
- {
- retme <<= 1;
- out_byte(0xA539, 0x00);
- out_byte(0xA539, 0x02);
- r = in_byte(0xA538) & 0x01;
- retme |= r;
- }
-
- return retme;
-}
-
-int sm_get_ack(void)
-{
- uint8 r;
- r = in_byte(0xA538);
- if ((r&0x01) == 0) return TRUE;
- else return FALSE;
-}
-
-void sm_write_ack(void)
-{
- out_byte(0xA539, 0x00);
- out_byte(0xA539, 0x02);
- out_byte(0xA539, 0x00);
-}
-
-void sm_write_nack(void)
-{
- out_byte(0xA539, 0x01);
- out_byte(0xA539, 0x03);
- out_byte(0xA539, 0x01);
-}
-
-void sm_send_start(void)
-{
- out_byte(0xA539, 0x03);
- out_byte(0xA539, 0x02);
-}
-
-void sm_send_stop(void)
-{
- out_byte(0xA539, 0x02);
- out_byte(0xA539, 0x03);
-}
-
-int sm_read_byte_from_device(uint8 addr, uint8 reg, uint8 *storage)
-{
- /* S Addr Wr */
- sm_write_mode();
- sm_send_start();
- sm_write_byte((addr<<1));
-
- /* [A] */
- sm_read_mode();
- if (sm_get_ack() == FALSE) return FALSE;
-
- /* Comm */
- sm_write_mode();
- sm_write_byte(reg);
-
- /* [A] */
- sm_read_mode();
- if (sm_get_ack() == FALSE) return FALSE;
-
- /* S Addr Rd */
- sm_write_mode();
- sm_send_start();
- sm_write_byte((addr<<1)|1);
-
- /* [A] */
- sm_read_mode();
- if (sm_get_ack() == FALSE) return FALSE;
-
- /* [Data] */
- *storage = sm_read_byte();
-
- /* NA */
- sm_write_mode();
- sm_write_nack();
- sm_send_stop();
-
- return TRUE;
-}
-
-void sm_init(void)
-{
- /* Switch to PMC mode */
- pci_write_cfg_byte(0, 0, REG_GROUP, (uint8)(REG_GROUP_SPECIAL|REG_GROUP_POWER));
-
- /* Set GPIO Base */
- pci_write_cfg_long(0, 0, 0x40, 0xa500);
-
- /* Enable GPIO */
- pci_write_cfg_byte(0, 0, 0x44, 0x11);
-
- /* Set both GPIO 0 and 1 as output */
- out_byte(0xA53A, 0x03);
-}
-
-
-void sm_term(void)
-{
- /* Switch to normal mode */
- pci_write_cfg_byte(0, 0, REG_GROUP, 0);
-}
-
-
-int sm_get_data(uint8 *DataArray, int dimm_socket)
-{
- int j;
-
-#if 0
- /* Switch to PMC mode */
- pci_write_cfg_byte(0, 0, REG_GROUP, (uint8)(REG_GROUP_SPECIAL|REG_GROUP_POWER));
-
- /* Set GPIO Base */
- pci_write_cfg_long(0, 0, 0x40, 0xa500);
-
- /* Enable GPIO */
- pci_write_cfg_byte(0, 0, 0x44, 0x11);
-
- /* Set both GPIO 0 and 1 as output */
- out_byte(0xA53A, 0x03);
-#endif
-
- sm_init();
- /* Start reading the rom */
-
- j = 0;
-
- do
- {
- if (sm_read_byte_from_device(dimm_socket, (uint8)j, DataArray) == FALSE)
- {
- sm_term();
- return FALSE;
- }
-
- DataArray++;
- j++;
- } while (j < 128);
-
- sm_term();
- return TRUE;
-}
+++ /dev/null
-#ifndef _SMBUS_H_
-#define _SMBUS_H_
-
-#include "short_types.h"
-
-#define SM_DIMM0_ADDR 0x51
-#define SM_DIMM1_ADDR 0x52
-
-void sm_write_mode(void);
-void sm_read_mode(void);
-void sm_write_byte(uint8 writeme);
-uint8 sm_read_byte(void);
-int sm_get_ack(void);
-void sm_write_ack(void);
-void sm_write_nack(void);
-void sm_send_start(void);
-void sm_send_stop(void);
-int sm_read_byte_from_device(uint8 addr, uint8 reg, uint8 *storage);
-int sm_get_data(uint8 *DataArray, int dimm_socket);
-void sm_init(void);
-void sm_term(void);
-#endif
+++ /dev/null
-
- /*------------------------------------------------------*/
- /* TERON Articia / SDRAM Init */
- /*------------------------------------------------------*/
-
-* XD_CTL = 0x81000000 (0x74)
-
-* HBUS_ACC_CTL_0 &= 0xFFFFFDFF (0x5c)
- /* host bus access ctl reg 2(5e) */
- /* set - CPU read from memory data one clock after data is latched */
-
-* GLOBL_INFO_0 |= 0x00004000 (0x50)
- /* global info register 2 (52), AGP/PCI bus 1 arbiter is addressed in Articia S */
-
- PCI_1_SB_CONFIG_0 |= 0x00000400 (0x80d0)
- /* PCI1 side band config reg 2 (d2), enable read acces while write buffer not empty */
-
- MEM_RAS_CTL_0 |= 0x3f000000 (0xcc)
- &= 0x3fffffff
- /* RAS park control reg 0(cc), park access enable is set */
-
- HOST_RDBUF_CTL |= 0x10000000 (0x70)
- &= 0x10ffffff
- /* host read buffer control reg, enable prefetch for CPU read from DRAM control */
-
- HBUS_ACC_CTL_0 |= 0x0100001f (0x5c)
- &= 0xf1ffffff
- /* host bus access control register, enable CPU address bus pipe control */
- /* two outstanding requests, *** changed to 2 from 3 */
- /* enable line merge write control for CPU write to system memory, PCI 1 */
- /* and PCI 0 bus memory; enable page merge write control for write to */
- /* PCI bus 0 & bus 1 memory */
-
- SRAM_CTL |= 0x00004000 (0xc8)
- &= 0xffbff7ff
- /* DRAM detail timing control register 1 (ca), bit 3 set to 0 */
- /* DRAM start access latency control - wait for one clock */
- /* ff9f changed to ffbf */
-
- DIM0_TIM_CTL_0 = 0x737d737d (0xc9)
- /* DRAM timing control for dimm0 & dimm1; set wait one clock */
- /* cycle for next data access */
-
- DIM2_TIM_CTL_0 = 0x737d737d (0xca)
- /* DRAM timing control for dimm2 & dimm3; set wait one clock */
- /* cycle for next data access */
-
- DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB (0x90)
- /* set dimm0 bank0 for 128 MB */
-
- DIM0_BNK1_CTL_0 = BNK1_RAM_SIZ_128MB (0x94)
- /* set dimm0 for bank1 */
-
- DIM0_TIM_CTL_0 = 0xf3bf0000 (0xc9)
- /* dimm0 timing control register; RAS - CAS latency - 4 clock */
- /* CAS access latency - 3 wait; pre-charge latency - 3 wait */
- /* pre-charge command period control - 5 clock; wait one clock */
- /* cycle for next data access; read to write access latency control */
- /* - 2 clock cycles */
-
- DRAM_GBL_CTL_0 |= 0x00000100 (0xc0)
- &= 0xffff01ff
- /* memory global control register - support buffer sdram on bank 0 */
-
- DRAM_ECC_CTL_0 |= 0x00260000 (0xc4)
- &= 0xff26ffff
- /* enable ECC; enable read, modify, write control */
-
- DRAM_REF_CTL_0 = DRAM_REF_DATA (0xb8)
- /* set DRAM refresh parameters *** changed to 00940100 */
-
- nop
- nop
- nop
- nop
- nop
-
- DRAM_ECC_CTL_0 |= 0x20243280 (0xc4)
- /* turn off ecc */
- /* for SDRAM bank 0 */
-
- DRAM_ECC_CTL_0 |= 0x20243290 (0xc4) ?
- /* for SDRAM bank 1 */
-
-
-/* Additional Stuff...*/
-
- GLOBL_CTRL |= 0x20000b00 (0x54)
-
- PCI_0_SB_CONFIG |= 0x04100007 (0xd0)
- /* PCI 0 Side band config reg*/
-
- 0x8000083c |= 0x00080000
- /* Disable VGA decode on PCI Bus 1 */
-
-
-/*End Additional Stuff..*/
-
- /*--------------------------------------------------------------*/
- /* TERON serial port initialization code */
- /*--------------------------------------------------------------*/
-
- 0x84380080 |= 0x00030000
- /* enable super IO configuration VIA chip Register 85 */
- /* Enable super I/O config mode */
-
- 0xfe0003f0 = 0xe2
- bl delay1
-
- 0xfe0003f1 = 0x0f
- bl delay1
- /* enable com1 & com2, parallel port disabled */
-
- 0xfe0003f0 = 0xe7
- bl delay1
- /* let's make com1 base as 0x3f8 */
-
- 0xfe0003f1 = 0xfe
- bl delay1
-
- 0xfe0003f0 = 0xe8
- bl delay1
- /* let's make com2 base as 0x2f8 */
-
- 0xfe0003f1 = 0xbe
-
- 0x84380080 &= 0xfffdffff
- /* closing super IO configuration VIA chip Register 85 */
-
-
-/* -------------------------------*/
-
- 0xfe0003fb = 0x83
- bl delay1
- /*latch enable word length -8 bit */ /* set mslab bit */
- 0xfe0003f8 = 0x0c
- bl delay1
- /* set baud rate lsb for 9600 baud */
- 0xfe0003f9 = 0x0
- bl delay1
- /* set baud rate msb for 9600 baud */
- 0xfe0003fb = 0x03
- bl delay1
- /* reset mslab */
-
- /*--------------------------------------------------------------*/
- /* END TERON Serial Port Initialization Code */
- /*--------------------------------------------------------------*/
-
-
- /*--------------------------------------------------------------*/
- /* END TERON Articia / SDRAM Initialization code */
- /*--------------------------------------------------------------*/
-
-Proposed from Documentation:
-
-write dmem 0xfec00cf8 0x50000080
-write dmem 0xfee00cfc 0xc0305411
-
- Writes to index 0x50-0x53.
- 0x50: Global Information Register 0
- 0xC0 = Little Endian CPU, Sequential order Burst
- 0x51: Global Information Register 1
- Read only, 0x30 = Provides PowerPC and X86 support
- 0x52: Global Information Register 2
- 0x05 = 64/128 bit CPU bus support
- 0x53: Global Information Register 3
- 0x80 = PCI Bus 0 grant active time is 1 clock after REQ# deasserted
-
-write dmem 0xfec00cf8 0x5c000080
-write dmem 0xfee00cfc 0xb300011F
-
-write dmem 0xfec00cf8 0xc8000080
-write dmem 0xfee00cfc 0x0020f100
-
-write dmem 0xfec00cf8 0x90000080
-write dmem 0xfee00cfc 0x007fe700
-
-write dmem 0xfec00cf8 0x9400080
-write dmem 0xfee00cfc 0x007fe700
-
-write dmem 0xfec00cf8 0xb0000080
-write dmem 0xfee00cfc 0x737d737d
-
-write dmem 0xfec00cf8 0xb4000080
-write dmem 0xfee00cfc 0x737d737d
-
-write dmem 0xfec00cf8 0xc0000080
-write dmem 0xfee00cfc 0x40005500
-
-write dmem 0xfec00cf8 0xb8000080
-write dmem 0xfee00cfc 0x00940100
-
-write dmem 0xfec00cf8 0xc4000080
-write dmem 0xfee00cfc 0x00003280
-
-write dmem 0xfec00cf8 0xc4000080
-write dmem 0xfee00cfc 0x00003290
+++ /dev/null
-- Init interrupt controller
-- init sdram
-- init ide controller
\ No newline at end of file
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the AmigaOneG3SE Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = ALIGN(4) /*.*/ ;
- PROVIDE (end = ALIGN(4) /*.*/);
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Note: Part of this code has been derived from linux
- *
- */
-
-/**********************************************************************
- * How it works:
- * -------------
- * The framelist / Transfer descriptor / Queue Heads are similar like
- * in the linux usb_uhci.c.
- *
- * During initialization, the following skeleton is allocated in init_skel:
- *
- * framespecific | common chain
- *
- * framelist[]
- * [ 0 ]-----> TD ---------\
- * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
- * ... TD ---------/
- * [1023]-----> TD --------/
- *
- * ^^ ^^ ^^ ^^ ^^
- * 7 TDs for 1 TD for Start of Start of End Chain
- * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
- *
- *
- * Since this is a bootloader, the isochronous transfer descriptor have been removed.
- *
- * Interrupt Transfers.
- * --------------------
- * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
- * will be inserted after the appropriate (depending the interval setting) skeleton TD.
- * If an interrupt has been detected the dev->irqhandler is called. The status and number
- * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
- * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
- * the interrupt TD will be reactivated.
- *
- * Control Transfers
- * -----------------
- * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- * Bulk Transfers
- * --------------
- * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- *
- */
-
-#include <common.h>
-#include <pci.h>
-
-#ifdef CONFIG_USB_UHCI
-
-#include <usb.h>
-#include "usb_uhci.h"
-
-#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
-#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
-
-
-/*#define USB_UHCI_DEBUG */
-
-#ifdef USB_UHCI_DEBUG
-#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define USB_UHCI_PRINTF(fmt,args...)
-#endif
-
-
-static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */
-unsigned int usb_base_addr; /* base address */
-
-static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */
-static uhci_qh_t qh_cntrl; /* control Queue Head */
-static uhci_qh_t qh_bulk; /* bulk Queue Head */
-static uhci_qh_t qh_end; /* end Queue Head */
-static uhci_td_t td_last; /* last TD (linked with end chain) */
-
-/* temporary tds */
-static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */
-static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */
-
-static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */
-
-static struct virt_root_hub rh; /* struct for root hub */
-
-/**********************************************************************
- * some forward decleration
- */
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len,struct devrequest *setup);
-
-/* fill a td with the approproiate data. Link, status, info and buffer
- * are used by the USB controller itselfes, dev is used to identify the
- * "connected" device
- */
-void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status,
- unsigned long info, unsigned long buffer, unsigned long dev)
-{
- td->link=swap_32(link);
- td->status=swap_32(status);
- td->info=swap_32(info);
- td->buffer=swap_32(buffer);
- td->dev_ptr=dev;
-}
-
-/* fill a qh with the approproiate data. Head and element are used by the USB controller
- * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
- * Please note, that after completion of the td chain, the entry element is removed /
- * marked invalid by the USB controller.
- */
-void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element)
-{
- qh->head=swap_32(head);
- qh->element=swap_32(element);
- qh->dev_ptr=0L;
-}
-
-/* get the status of a td->status
- */
-unsigned long usb_uhci_td_stat(unsigned long status)
-{
- unsigned long result=0;
- result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
- result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
- result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
- result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
- result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
- result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
- result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
- return result;
-}
-
-/* get the status and the transfered len of a td chain.
- * called from the completion handler
- */
-int usb_get_td_status(uhci_td_t *td,struct usb_device *dev)
-{
- unsigned long temp,info;
- unsigned long stat;
- uhci_td_t *mytd=td;
-
- if(dev->devnum==rh.devnum)
- return 0;
- dev->act_len=0;
- stat=0;
- do {
- temp=swap_32((unsigned long)mytd->status);
- stat=usb_uhci_td_stat(temp);
- info=swap_32((unsigned long)mytd->info);
- if(((info & 0xff)!= USB_PID_SETUP) &&
- (((info >> 21) & 0x7ff)!= 0x7ff) &&
- (temp & 0x7FF)!=0x7ff)
- { /* if not setup and not null data pack */
- dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
- }
- if(stat) { /* status no ok */
- dev->status=stat;
- return -1;
- }
- temp=swap_32((unsigned long)mytd->link);
- mytd=(uhci_td_t *)(temp & 0xfffffff0);
- }while((temp & 0x1)==0); /* process all TDs */
- dev->status=stat;
- return 0; /* Ok */
-}
-
-
-/*-------------------------------------------------------------------
- * LOW LEVEL STUFF
- * assembles QHs und TDs for control, bulk and iso
- *-------------------------------------------------------------------*/
-
-/* Submits a control message. That is a Setup, Data and Status transfer.
- * Routine does not wait for completion.
- */
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len,struct devrequest *setup)
-{
- unsigned long destination, status;
- int maxsze = usb_maxpacket(dev, pipe);
- unsigned long dataptr;
- int len;
- int pktsze;
- int i=0;
-
- if (!maxsze) {
- USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe);
- return -1;
- }
- if(((pipe>>8)&0x7f)==rh.devnum) {
- /* this is the root hub -> redirect it */
- return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup);
- }
- USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze);
- /* The "pipe" thing contains the destination in bits 8--18 */
- destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
- /* 3 errors */
- status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
- /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
- /* Build the TD for the control request, try forever, 8 bytes of data */
- usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev);
-#if 0
- {
- char *sp=(char *)setup;
- printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
- sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]);
- }
-#endif
- dataptr = (unsigned long)buffer;
- len=transfer_len;
-
- /* If direction is "send", change the frame from SETUP (0x2D)
- to OUT (0xE1). Else change it from SETUP to IN (0x69). */
- destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN);
- while (len > 0) {
- /* data stage */
- pktsze = len;
- i++;
- if (pktsze > maxsze)
- pktsze = maxsze;
- destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */
- usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
- tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
-
- dataptr += pktsze;
- len -= pktsze;
- }
-
- /* Build the final TD for control status */
- /* It's only IN if the pipe is out AND we aren't expecting data */
-
- destination &= ~UHCI_PID;
- if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0))
- destination |= USB_PID_IN;
- else
- destination |= USB_PID_OUT;
- destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */
- i++;
- status &=~TD_CTRL_SPD;
- /* no limit on errors on final packet , 0 bytes of data */
- usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev);
- tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */
- /* usb_show_td(i+1);*/
- USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i);
- /* first mark the control QH element terminated */
- qh_cntrl.element=0xffffffffL;
- /* set qh active */
- qh_cntrl.dev_ptr=(unsigned long)dev;
- /* fill in tmp_td_chain */
- qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]);
- return 0;
-}
-
-/*-------------------------------------------------------------------
- * Prepare TDs for bulk transfers.
- */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len)
-{
- unsigned long destination, status,info;
- unsigned long dataptr;
- int maxsze = usb_maxpacket(dev, pipe);
- int len;
- int i=0;
-
- if(transfer_len < 0) {
- printf("Negative transfer length in submit_bulk\n");
- return -1;
- }
- if (!maxsze)
- return -1;
- /* The "pipe" thing contains the destination in bits 8--18. */
- destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe);
- /* 3 errors */
- status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
- /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
- /* Build the TDs for the bulk request */
- len = transfer_len;
- dataptr = (unsigned long)buffer;
- do {
- int pktsze = len;
- if (pktsze > maxsze)
- pktsze = maxsze;
- /* pktsze bytes of data */
- info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) |
- (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE);
-
- if((len-pktsze)==0)
- status |= TD_CTRL_IOC; /* last one generates INT */
-
- usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
- if(i>0)
- tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
- i++;
- dataptr += pktsze;
- len -= pktsze;
- usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
- } while (len > 0);
- /* first mark the bulk QH element terminated */
- qh_bulk.element=0xffffffffL;
- /* set qh active */
- qh_bulk.dev_ptr=(unsigned long)dev;
- /* fill in tmp_td_chain */
- qh_bulk.element=swap_32((unsigned long)&tmp_td[0]);
- return 0;
-}
-
-
-/* search a free interrupt td
- */
-uhci_td_t *uhci_alloc_int_td(void)
-{
- int i;
- for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
- if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */
- return &tmp_int_td[i];
- }
- return NULL;
-}
-
-#if 0
-void uhci_show_temp_int_td(void)
-{
- int i;
- for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
- if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */
- printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr);
- }
- printf("all others temp_tds are free\n");
-}
-#endif
-/*-------------------------------------------------------------------
- * submits USB interrupt (ie. polling ;-)
- */
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval)
-{
- int nint, n;
- unsigned long status, destination;
- unsigned long info,tmp;
- uhci_td_t *mytd;
- if (interval < 0 || interval >= 256)
- return -1;
-
- if (interval == 0)
- nint = 0;
- else {
- for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */
- {
- if(interval < n) {
- interval = n / 2;
- break;
- }
- }
- nint--;
- }
-
- USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint);
- mytd=uhci_alloc_int_td();
- if(mytd==NULL) {
- printf("No free INT TDs found\n");
- return -1;
- }
- status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
-/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
-*/
-
- destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21);
-
- info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
- tmp = swap_32(td_int[nint].link);
- usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev);
- /* Link it */
- tmp = swap_32((unsigned long)mytd);
- td_int[nint].link=tmp;
-
- usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
-
- return 0;
-}
-
-/**********************************************************************
- * Low Level functions
- */
-
-
-void reset_hc(void)
-{
-
- /* Global reset for 100ms */
- out16r( usb_base_addr + USBPORTSC1,0x0204);
- out16r( usb_base_addr + USBPORTSC2,0x0204);
- out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS);
- /* Turn off all interrupts */
- out16r(usb_base_addr + USBINTR,0);
- wait_ms(50);
- out16r( usb_base_addr + USBCMD,0);
- wait_ms(10);
-}
-
-void start_hc(void)
-{
- int timeout = 1000;
-
- while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
- if (!--timeout) {
- printf("USBCMD_HCRESET timed out!\n");
- break;
- }
- }
- /* Turn on all interrupts */
- out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
- /* Start at frame 0 */
- out16r(usb_base_addr + USBFRNUM,0);
- /* set Framebuffer base address */
- out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist);
- /* Run and mark it configured with a 64-byte max packet */
- out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
-}
-
-/* Initialize the skeleton
- */
-void usb_init_skel(void)
-{
- unsigned long temp;
- int n;
-
- for(n=0;n<USB_MAX_TEMP_INT_TD;n++)
- tmp_int_td[n].dev_ptr=0L; /* no devices connected */
- /* last td */
- usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L);
- /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
- /* End Queue Header */
- usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last);
- /* Bulk Queue Header */
- temp=(unsigned long)&qh_end;
- usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM);
- /* Control Queue Header */
- temp=(unsigned long)&qh_bulk;
- usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM);
- /* 1ms Interrupt td */
- temp=(unsigned long)&qh_cntrl;
- usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L);
- temp=(unsigned long)&td_int[0];
- for(n=1; n<8; n++)
- usb_fill_td(&td_int[n],temp,0,0,0,0L);
- for (n = 0; n < 1024; n++) {
- /* link all framelist pointers to one of the interrupts */
- int m, o;
- if ((n&127)==127)
- framelist[n]= swap_32((unsigned long)&td_int[0]);
- else
- for (o = 1, m = 2; m <= 128; o++, m += m)
- if ((n & (m - 1)) == ((m - 1) / 2))
- framelist[n]= swap_32((unsigned long)&td_int[o]);
- }
-}
-
-/* check the common skeleton for completed transfers, and update the status
- * of the "connected" device. Called from the IRQ routine.
- */
-void usb_check_skel(void)
-{
- struct usb_device *dev;
- /* start with the control qh */
- if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
- {
- dev=(struct usb_device *)qh_cntrl.dev_ptr;
- usb_get_td_status(&tmp_td[0],dev); /* update status */
- if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
- qh_cntrl.dev_ptr=0;
- }
- }
- /* now process the bulk */
- if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
- {
- dev=(struct usb_device *)qh_bulk.dev_ptr;
- usb_get_td_status(&tmp_td[0],dev); /* update status */
- if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
- qh_bulk.dev_ptr=0;
- }
- }
-}
-
-/* check the interrupt chain, ubdate the status of the appropriate device,
- * call the appropriate irqhandler and reactivate the TD if the irqhandler
- * returns with 1
- */
-void usb_check_int_chain(void)
-{
- int i,res;
- unsigned long link,status;
- struct usb_device *dev;
- uhci_td_t *td,*prevtd;
-
- for(i=0;i<8;i++) {
- prevtd = &td_int[i]; /* the first previous td is the skeleton td */
- link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
- td=(uhci_td_t *)link; /* assign it */
- /* all interrupt TDs are finally linked to the td_int[0].
- * so we process all until we find the td_int[0].
- * if int0 chain points to a QH, we're also done
- */
- while(((i>0) && (link != (unsigned long)&td_int[0])) ||
- ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH)))
- {
- /* check if a device is assigned with this td */
- status=swap_32(td->status);
- if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) {
- /* td is not active and a device is assigned -> call irqhandler */
- dev=(struct usb_device *)td->dev_ptr;
- dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
- dev->irq_status=usb_uhci_td_stat(status); /* get status */
- res=dev->irq_handle(dev); /* call irqhandler */
- if(res==1) {
- /* reactivate */
- status|=TD_CTRL_ACTIVE;
- td->status=swap_32(status);
- prevtd=td; /* previous td = this td */
- }
- else {
- prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */
- /* remove device pointer */
- td->dev_ptr=0L;
- }
- } /* if we call the irq handler */
- link=swap_32(td->link) & 0xfffffff0; /* next in chain */
- td=(uhci_td_t *)link; /* assign it */
- } /* process all td in this int chain */
- } /* next interrupt chain */
-}
-
-
-/* usb interrupt service routine.
- */
-void handle_usb_interrupt(void)
-{
- unsigned short status;
-
- /*
- * Read the interrupt status, and write it back to clear the
- * interrupt cause
- */
-
- status = in16r(usb_base_addr + USBSTS);
-
- if (!status) /* shared interrupt, not mine */
- return;
- if (status != 1) {
- /* remove host controller halted state */
- if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) {
- out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD));
- }
- }
- usb_check_int_chain(); /* call interrupt handlers for int tds */
- usb_check_skel(); /* call completion handler for common transfer routines */
- out16r(usb_base_addr+USBSTS,status);
-}
-
-
-/* init uhci
- */
-int usb_lowlevel_init(void)
-{
- unsigned char temp;
- int busdevfunc;
-/*
- * HJF - configure IRQ and base from variables optionally.
- */
- char *s;
-
-
- busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */
- if(busdevfunc == -1) {
- printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID);
- return -1;
- }
-
-#if 1
- s = getenv("usb_irq");
- if (s)
- {
- temp = atoi(s);
- pci_write_config_byte(busdevfunc, PCI_INTERRUPT_LINE, temp);
- }
- else
-#endif
- pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp);
-
- s = getenv("usb_base");
- if (s)
- {
- unsigned long temp2;
- temp2 = atoi(s);
- pci_write_config_dword(busdevfunc, PCI_BASE_ADDRESS_4, temp2|0x01);
- }
-
- irqvec = temp;
- irq_free_handler(irqvec);
- USB_UHCI_PRINTF("Interrupt Line = %d\n",irqvec);
- pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp);
- USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp);
- pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
- USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
- usb_base_addr&=0xFFFFFFF0;
- usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
- rh.devnum = 0;
- usb_init_skel();
- reset_hc();
- start_hc();
- irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL);
- irq_install_handler(0, (interrupt_handler_t *)handle_usb_interrupt, NULL);
-
- return 0;
-}
-
-/* stop uhci
- */
-int usb_lowlevel_stop(void)
-{
- if(irqvec == -1)
- return 1;
- irq_free_handler(irqvec);
- irq_free_handler(0);
- reset_hc();
- irqvec = -1;
- return 0;
-}
-
-/*******************************************************************************************
- * Virtual Root Hub
- * Since the uhci does not have a real HUB, we simulate one ;-)
- */
-#undef USB_RH_DEBUG
-
-#ifdef USB_RH_DEBUG
-#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args)
-static void usb_display_wValue(unsigned short wValue,unsigned short wIndex);
-static void usb_display_Req(unsigned short req);
-#else
-#define USB_RH_PRINTF(fmt,args...)
-static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {}
-static void usb_display_Req(unsigned short req) {}
-#endif
-
-static unsigned char root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x00, /* __u16 bcdUSB; v1.0 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x01, /* __u8 iManufacturer; */
- 0x00, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static unsigned char root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-
-static unsigned char root_hub_hub_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
- 0x02, /* __u8 bNbrPorts; */
- 0x00, /* __u16 wHubCharacteristics; */
- 0x00,
- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
- 0x00, /* __u8 bHubContrCurrent; 0 mA */
- 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'U', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-
-/*
- * Root Hub Control Pipe (interrupt Pipes are not supported)
- */
-
-
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd)
-{
- void *data = buffer;
- int leni = transfer_len;
- int len = 0;
- int status = 0;
- int stat = 0;
- int i;
-
- unsigned short cstatus;
-
- unsigned short bmRType_bReq;
- unsigned short wValue;
- unsigned short wIndex;
- unsigned short wLength;
-
- if (usb_pipeint(pipe)) {
- printf("Root-Hub submit IRQ: NOT implemented\n");
-#if 0
- uhci->rh.urb = urb;
- uhci->rh.send = 1;
- uhci->rh.interval = urb->interval;
- rh_init_int_timer (urb);
-#endif
- return 0;
- }
- bmRType_bReq = cmd->requesttype | cmd->request << 8;
- wValue = swap_16(cmd->value);
- wIndex = swap_16(cmd->index);
- wLength = swap_16(cmd->length);
- usb_display_Req(bmRType_bReq);
- for (i = 0; i < 8; i++)
- rh.c_p_r[i] = 0;
- USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
- dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(unsigned short *) data = swap_16(1);
- len=2;
- break;
- case RH_GET_STATUS | RH_INTERFACE:
- *(unsigned short *) data = swap_16(0);
- len=2;
- break;
- case RH_GET_STATUS | RH_ENDPOINT:
- *(unsigned short *) data = swap_16(0);
- len=2;
- break;
- case RH_GET_STATUS | RH_CLASS:
- *(unsigned long *) data = swap_32(0);
- len=4;
- break; /* hub power ** */
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-
- status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
- cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
- ((status & USBPORTSC_PEC) >> (3 - 1)) |
- (rh.c_p_r[wIndex - 1] << (0 + 4));
- status = (status & USBPORTSC_CCS) |
- ((status & USBPORTSC_PE) >> (2 - 1)) |
- ((status & USBPORTSC_SUSP) >> (12 - 2)) |
- ((status & USBPORTSC_PR) >> (9 - 4)) |
- (1 << 8) | /* power on ** */
- ((status & USBPORTSC_LSDA) << (-8 + 9));
-
- *(unsigned short *) data = swap_16(status);
- *(unsigned short *) (data + 2) = swap_16(cstatus);
- len=4;
- break;
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL):
- len=0;
- break;
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case (RH_C_HUB_OVER_CURRENT):
- len=0; /* hub power over current ** */
- break;
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- usb_display_wValue(wValue,wIndex);
- switch (wValue) {
- case (RH_PORT_ENABLE):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) & ~USBPORTSC_PE;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- case (RH_PORT_SUSPEND):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) & ~USBPORTSC_SUSP;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- case (RH_PORT_POWER):
- len=0; /* port power ** */
- break;
- case (RH_C_PORT_CONNECTION):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) | USBPORTSC_CSC;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- case (RH_C_PORT_ENABLE):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) | USBPORTSC_PEC;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- case (RH_C_PORT_SUSPEND):
-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
- len=0;
- break;
- case (RH_C_PORT_OVER_CURRENT):
- len=0;
- break;
- case (RH_C_PORT_RESET):
- rh.c_p_r[wIndex - 1] = 0;
- len=0;
- break;
- }
- break;
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- usb_display_wValue(wValue,wIndex);
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) | USBPORTSC_SUSP;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- case (RH_PORT_RESET):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) | USBPORTSC_PR;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- wait_ms(10);
- status = (status & 0xfff5) & ~USBPORTSC_PR;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- udelay(10);
- status = (status & 0xfff5) | USBPORTSC_PE;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- wait_ms(10);
- status = (status & 0xfff5) | 0xa;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- case (RH_PORT_POWER):
- len=0; /* port power ** */
- break;
- case (RH_PORT_ENABLE):
- status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
- status = (status & 0xfff5) | USBPORTSC_PE;
- out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
- len=0;
- break;
- }
- break;
-
- case RH_SET_ADDRESS:
- rh.devnum = wValue;
- len=0;
- break;
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- i=sizeof(root_hub_config_des);
- status=i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy (data, root_hub_dev_des, len);
- break;
- case (0x02): /* configuration descriptor */
- i=sizeof(root_hub_config_des);
- status=i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy (data, root_hub_config_des, len);
- break;
- case (0x03): /*string descriptors */
- if(wValue==0x0300) {
- i=sizeof(root_hub_str_index0);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy (data, root_hub_str_index0, len);
- break;
- }
- if(wValue==0x0301) {
- i=sizeof(root_hub_str_index1);
- status = i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy (data, root_hub_str_index1, len);
- break;
- }
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- root_hub_hub_des[2] = 2;
- i=sizeof(root_hub_hub_des);
- status= i > wLength ? wLength : i;
- len = leni > status ? status : leni;
- memcpy (data, root_hub_hub_des, len);
- break;
- case RH_GET_CONFIGURATION:
- *(unsigned char *) data = 0x01;
- len = 1;
- break;
- case RH_SET_CONFIGURATION:
- len=0;
- break;
- default:
- stat = USB_ST_STALLED;
- }
- USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat,
- in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2));
- dev->act_len=len;
- dev->status=stat;
- return stat;
-
-}
-
-/********************************************************************************
- * Some Debug Routines
- */
-
-#ifdef USB_RH_DEBUG
-
-static void usb_display_Req(unsigned short req)
-{
- USB_RH_PRINTF("- Root-Hub Request: ");
- switch (req) {
- case RH_GET_STATUS:
- USB_RH_PRINTF("Get Status ");
- break;
- case RH_GET_STATUS | RH_INTERFACE:
- USB_RH_PRINTF("Get Status Interface ");
- break;
- case RH_GET_STATUS | RH_ENDPOINT:
- USB_RH_PRINTF("Get Status Endpoint ");
- break;
- case RH_GET_STATUS | RH_CLASS:
- USB_RH_PRINTF("Get Status Class");
- break; /* hub power ** */
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- USB_RH_PRINTF("Get Status Class Others");
- break;
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- USB_RH_PRINTF("Clear Feature Endpoint ");
- break;
- case RH_CLEAR_FEATURE | RH_CLASS:
- USB_RH_PRINTF("Clear Feature Class ");
- break;
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- USB_RH_PRINTF("Clear Feature Other Class ");
- break;
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- USB_RH_PRINTF("Set Feature Other Class ");
- break;
- case RH_SET_ADDRESS:
- USB_RH_PRINTF("Set Address ");
- break;
- case RH_GET_DESCRIPTOR:
- USB_RH_PRINTF("Get Descriptor ");
- break;
- case RH_GET_DESCRIPTOR | RH_CLASS:
- USB_RH_PRINTF("Get Descriptor Class ");
- break;
- case RH_GET_CONFIGURATION:
- USB_RH_PRINTF("Get Configuration ");
- break;
- case RH_SET_CONFIGURATION:
- USB_RH_PRINTF("Get Configuration ");
- break;
- default:
- USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req);
- }
- USB_RH_PRINTF("\n");
-
-}
-
-static void usb_display_wValue(unsigned short wValue,unsigned short wIndex)
-{
- switch (wValue) {
- case (RH_PORT_ENABLE):
- USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex);
- break;
- case (RH_PORT_SUSPEND):
- USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex);
- break;
- case (RH_PORT_POWER):
- USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex);
- break;
- case (RH_C_PORT_CONNECTION):
- USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex);
- break;
- case (RH_C_PORT_ENABLE):
- USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex);
- break;
- case (RH_C_PORT_SUSPEND):
- USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex);
- break;
- case (RH_C_PORT_OVER_CURRENT):
- USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex);
- break;
- case (RH_C_PORT_RESET):
- USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex);
- break;
- default:
- USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex);
- break;
- }
-}
-
-#endif
-
-
-#ifdef USB_UHCI_DEBUG
-
-static int usb_display_td(uhci_td_t *td)
-{
- unsigned long tmp;
- int valid;
-
- printf("TD at %p:\n",td);
-
- tmp=swap_32(td->link);
- printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0,
- ((tmp & 0x4)==0x4) ? "Depth" : "Breath",
- ((tmp & 0x2)==0x2) ? "QH" : "TD",
- ((tmp & 0x1)==0x1) ? "invalid" : "valid");
- valid=((tmp & 0x1)==0x0);
- tmp=swap_32(td->status);
- printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n",
- (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable",
- ((tmp>>28)&0x3),
- (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed",
- (((tmp>>25)&0x1)==0x1) ? "ISO " : "",
- (((tmp>>24)&0x1)==0x1) ? "IOC " : "",
- (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ",
- (((tmp>>22)&0x1)==0x1) ? "Stalled" : "",
- (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "",
- (((tmp>>20)&0x1)==0x1) ? "Babble" : "",
- (((tmp>>19)&0x1)==0x1) ? "NAK" : "",
- (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "",
- (tmp&0x7ff));
- tmp=swap_32(td->info);
- printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF));
- printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "",
- ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF);
- tmp=swap_32(td->buffer);
- printf(" Buffer 0x%08lX\n",tmp);
- printf(" DEV %08lX\n",td->dev_ptr);
- return valid;
-}
-
-
-void usb_show_td(int max)
-{
- int i;
- if(max>0) {
- for(i=0;i<max;i++) {
- usb_display_td(&tmp_td[i]);
- }
- }
- else {
- i=0;
- do {
- printf("tmp_td[%d]\n",i);
- }while(usb_display_td(&tmp_td[i++]));
- }
-}
-
-
-#endif
-#endif /* CONFIG_USB_UHCI */
-
-/* EOF */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Note: Part of this code has been derived from linux
- *
- */
-#ifndef _USB_UHCI_H_
-#define _USB_UHCI_H_
-
-#undef USB_UHCI_VEND_ID
-#define USB_UHCI_VEND_ID PCI_VENDOR_ID_VIA
-#undef USB_UHCI_DEV_ID
-#define USB_UHCI_DEV_ID 0x3038
-
-/* Command register */
-#define USBCMD 0
-#define USBCMD_RS 0x0001 /* Run/Stop */
-#define USBCMD_HCRESET 0x0002 /* Host reset */
-#define USBCMD_GRESET 0x0004 /* Global reset */
-#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
-#define USBCMD_FGR 0x0010 /* Force Global Resume */
-#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
-#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
-#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
-
-/* Status register */
-#define USBSTS 2
-#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
-#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
-#define USBSTS_RD 0x0004 /* Resume Detect */
-#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
-#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
-#define USBSTS_HCH 0x0020 /* HC Halted */
-
-/* Interrupt enable register */
-#define USBINTR 4
-#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
-#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
-#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
-#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
-
-#define USBFRNUM 6
-#define USBFLBASEADD 8
-#define USBSOF 12
-
-/* USB port status and control registers */
-#define USBPORTSC1 16
-#define USBPORTSC2 18
-#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
-#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
-#define USBPORTSC_PE 0x0004 /* Port Enable */
-#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
-#define USBPORTSC_LS 0x0030 /* Line Status */
-#define USBPORTSC_RD 0x0040 /* Resume Detect */
-#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
-#define USBPORTSC_PR 0x0200 /* Port Reset */
-#define USBPORTSC_SUSP 0x1000 /* Suspend */
-
-/* Legacy support register */
-#define USBLEGSUP 0xc0
-#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-
-#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */
-#define UHCI_PID 0xff /* PID MASK */
-
-#define UHCI_PTR_BITS 0x000F
-#define UHCI_PTR_TERM 0x0001
-#define UHCI_PTR_QH 0x0002
-#define UHCI_PTR_DEPTH 0x0004
-
-/* for TD <status>: */
-#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
-#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
-#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
-#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
-#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
-#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
-#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
-#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
-#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
-#define TD_CTRL_NAK (1 << 19) /* NAK Received */
-#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
-#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
-#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */
-
-#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
- TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
-
-#define TD_TOKEN_TOGGLE 19
-
-/* ------------------------------------------------------------------------------------
- Virtual Root HUB
- ------------------------------------------------------------------------------------ */
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP 0x00
-
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-
-/* Transfer descriptor structure */
-typedef struct {
- unsigned long link; /* next td/qh (LE)*/
- unsigned long status; /* status of the td */
- unsigned long info; /* Max Lenght / Endpoint / device address and PID */
- unsigned long buffer; /* pointer to data buffer (LE) */
- unsigned long dev_ptr; /* pointer to the assigned device (BE) */
- unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */
-} uhci_td_t, *puhci_td_t;
-
-/* Queue Header structure */
-typedef struct {
- unsigned long head; /* Next QH (LE)*/
- unsigned long element; /* Queue element pointer (LE) */
- unsigned long res[5]; /* reserved */
- unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */
-} uhci_qh_t, *puhci_qh_t;
-
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- int numports; /* number of ports */
- int c_p_r[8]; /* C_PORT_RESET */
-};
-
-
-#endif /* _USB_UHCI_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Hyperion Entertainment, Hans-JoergF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <pci.h>
-#include <ata.h>
-#include "memio.h"
-#include "articiaS.h"
-#include "via686.h"
-#include "i8259.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef VIA_DEBUG
-
-#ifdef VIA_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-
-/* Setup the ISA-to-PCI host bridge */
-void via_isa_init(pci_dev_t dev, struct pci_config_table *table)
-{
- char regval;
- if (PCI_FUNC(dev) == 0)
- {
- PRINTF("... PCI-to-ISA bridge, dev=0x%X\n", dev);
-
- /* Enable I/O Recovery time */
- pci_write_config_byte(dev, 0x40, 0x08);
-
- /* Enable ISA refresh */
- pci_write_config_byte(dev, 0x41, 0x41); /* was 01 */
-
- /* Enable ISA line buffer */
- pci_write_config_byte(dev, 0x45, 0x80);
-
- /* Gate INTR, and flush line buffer */
- pci_write_config_byte(dev, 0x46, 0x60);
-
- /* Enable EISA ports 4D0/4D1. Do we need this ? */
- pci_write_config_byte(dev, 0x47, 0xe6); /* was 20 */
-
- /* 512 K PCI Decode */
- pci_write_config_byte(dev, 0x48, 0x01);
-
- /* Wait for PGNT before grant to ISA Master/DMA */
- /* ports 0-FF to SDBus */
- /* IRQ 14 and 15 for ide 0/1 */
- pci_write_config_byte(dev, 0x4a, 0x04); /* Was c4 */
-
- /* Plug'n'Play */
- /* Parallel DRQ 3, Floppy DRQ 2 (default) */
- pci_write_config_byte(dev, 0x50, 0x0e);
-
- /* IRQ Routing for Floppy and Parallel port */
- /* IRQ 6 for floppy, IRQ 7 for parallel port */
- pci_write_config_byte(dev, 0x51, 0x76);
-
- /* IRQ Routing for serial ports (take IRQ 3 and 4) */
- pci_write_config_byte(dev, 0x52, 0x34);
-
- /* All IRQ's level triggered. */
- pci_write_config_byte(dev, 0x54, 0x00);
-
- /* PCI IRQ's all at IRQ 9 */
- pci_write_config_byte(dev, 0x55, 0x90);
- pci_write_config_byte(dev, 0x56, 0x99);
- pci_write_config_byte(dev, 0x57, 0x90);
-
- /* Enable Keyboard */
- pci_read_config_byte(dev, 0x5A, ®val);
- regval |= 0x01;
- pci_write_config_byte(dev, 0x5A, regval);
-
- pci_write_config_byte(dev, 0x80, 0);
- pci_write_config_byte(dev, 0x85, 0x01);
-
-/* pci_write_config_byte(dev, 0x77, 0x00); */
- }
-}
-
-/*
- * Initialize PNP irq routing
- */
-
-void via_init_irq_routing(uint8 irq_map[])
-{
- char *s;
- uint8 level_edge_bits = 0xf;
-
- /* Set irq routings */
- pci_write_cfg_byte(0, 7<<3, 0x55, irq_map[0]<<4);
- pci_write_cfg_byte(0, 7<<3, 0x56, irq_map[1] | irq_map[2]<<4);
- pci_write_cfg_byte(0, 7<<3, 0x57, irq_map[3]<<4);
-
- /*
- * Gather level/edge bits
- * Default is to assume level triggered
- */
-
- s = getenv("pci_irqa_select");
- if (s && strcmp(s, "level") == 0)
- level_edge_bits &= ~0x01;
-
- s = getenv("pci_irqb_select");
- if (s && strcmp(s, "level") == 0)
- level_edge_bits &= ~0x02;
-
- s = getenv("pci_irqc_select");
- if (s && strcmp(s, "level") == 0)
- level_edge_bits &= ~0x04;
-
- s = getenv("pci_irqd_select");
- if (s && strcmp(s, "level") == 0)
- level_edge_bits &= ~0x08;
-
- PRINTF("IRQ map\n");
- PRINTF("%d: %s\n", irq_map[0], level_edge_bits&0x1 ? "edge" : "level");
- PRINTF("%d: %s\n", irq_map[1], level_edge_bits&0x2 ? "edge" : "level");
- PRINTF("%d: %s\n", irq_map[2], level_edge_bits&0x4 ? "edge" : "level");
- PRINTF("%d: %s\n", irq_map[3], level_edge_bits&0x8 ? "edge" : "level");
- pci_write_cfg_byte(0, 7<<3, 0x54, level_edge_bits);
-
- PRINTF("%02x %02x %02x %02x\n", pci_read_cfg_byte(0, 7<<3, 0x54),
- pci_read_cfg_byte(0, 7<<3, 0x55), pci_read_cfg_byte(0, 7<<3, 0x56),
- pci_read_cfg_byte(0, 7<<3, 0x57));
-}
-
-
-/* Setup the IDE controller. This doesn't seem to work yet. I/O to an IDE controller port */
-/* always return the last character output on the serial port (!) */
-/* This function is called by the pnp-library when it encounters 0:7:1 */
-void via_cfgfunc_ide_init(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table)
-{
- PRINTF("... IDE controller, dev=0x%X\n", dev);
-
- /* Enable both IDE channels. */
- pci_write_config_byte(dev, 0x40, 0x03);
- /* udelay(10000); */
- /* udelay(10000); */
-
- /* Enable IO Space */
- pci_write_config_word(dev, 0x04, 0x03);
-
- /* Set to compatibility mode */
- pci_write_config_byte(dev, 0x09, 0x8A); /* WAS: 0x8f); */
-
- /* Set to legacy interrupt mode */
- pci_write_config_byte(dev, 0x3d, 0x00); /* WAS: 0x01); */
-
-}
-
-
-/* Set the base address of the floppy controller to 0x3F0 */
-void via_fdc_init(pci_dev_t dev)
-{
- unsigned char c;
- /* Enable Configuration mode */
- pci_read_config_byte(dev, 0x85, &c);
- c |= 0x02;
- pci_write_config_byte(dev, 0x85, c);
-
- /* Set floppy controller port to 0x3F0. */
- SIO_WRITE_CONFIG(0xE3, (0x3F<<2));
-
- /* Enable floppy controller */
- SIO_READ_CONFIG(0xE2, c);
- c |= 0x10;
- SIO_WRITE_CONFIG(0xE2, c);
-
- /* Switch of configuration mode */
- pci_read_config_byte(dev, 0x85, &c);
- c &= ~0x02;
- pci_write_config_byte(dev, 0x85, c);
-}
-
-/* Init function 0 of the via southbridge. Called by the pnp-library */
-void via_cfgfunc_via686(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table)
-{
- if (PCI_FUNC(dev) == 0)
- {
- /* FIXME: Try to generate a PCI reset */
- /* unsigned char c; */
- /* pci_read_config_byte(dev, 0x47, &c); */
- /* pci_write_config_byte(dev, 0x47, c | 0x01); */
-
- via_isa_init(dev, table);
- via_fdc_init(dev);
- }
-}
-
-__asm__ (" .globl via_calibrate_time_base \n"
- "via_calibrate_time_base: \n"
- " lis 9, 0xfe00 \n"
- " li 0, 0x00 \n"
- " mttbu 0 \n"
- " mttbl 0 \n"
- "ctb_loop: \n"
- " lbz 0, 0x61(9) \n"
- " eieio \n"
- " andi. 0, 0, 0x20 \n"
- " beq ctb_loop \n"
- "ctb_done: \n"
- " mftb 3 \n"
- " blr");
-
-extern unsigned long via_calibrate_time_base(void);
-
-void via_calibrate_bus_freq (void)
-{
- unsigned long tb;
-
- /* This is 20 microseconds */
-#define CALIBRATE_TIME 28636
-
- /* Enable the timer (and disable speaker) */
- unsigned char c;
-
- c = in_byte (0x61);
- out_byte (0x61, ((c & ~0x02) | 0x01));
-
- /* Set timer 2 to low/high writing */
- out_byte (0x43, 0xb0);
- out_byte (0x42, CALIBRATE_TIME & 0xff);
- out_byte (0x42, CALIBRATE_TIME >> 8);
-
- /* Read the time base */
- tb = via_calibrate_time_base ();
-
- if (tb >= 700000)
- gd->bus_clk = 133333333;
- else
- gd->bus_clk = 100000000;
-
-}
-
-
-void ide_led(uchar led, uchar status)
-{
-/* unsigned char c = in_byte(0x92); */
-
-/* if (!status) */
-/* out_byte(0x92, c | 0xC0); */
-/* else */
-/* out_byte(0x92, c & ~0xC0); */
-}
-
-
-void via_init_afterscan(void)
-{
- /* Modify IDE controller setup */
- pci_write_cfg_byte(0, 7<<3|1, PCI_LATENCY_TIMER, 0x20);
- pci_write_cfg_byte(0, 7<<3|1, PCI_COMMAND, PCI_COMMAND_IO|PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER);
- pci_write_cfg_byte(0, 7<<3|1, PCI_INTERRUPT_LINE, 0xff);
- pci_write_cfg_byte(0, 7<<3|1, 0x40, 0x0b); /* FIXME: Might depend on drives connected */
- pci_write_cfg_byte(0, 7<<3|1, 0x41, 0x42); /* FIXME: Might depend on drives connected */
- pci_write_cfg_byte(0, 7<<3|1, 0x43, 0x05);
- pci_write_cfg_byte(0, 7<<3|1, 0x44, 0x18);
- pci_write_cfg_byte(0, 7<<3|1, 0x45, 0x10);
- pci_write_cfg_byte(0, 7<<3|1, 0x4e, 0x22); /* FIXME: Not documented, but set in PC bios */
- pci_write_cfg_byte(0, 7<<3|1, 0x4f, 0x20); /* FIXME: Not documented */
-
- /* Modify some values in the USB controller */
- pci_write_cfg_byte(0, 7<<3|2, 0x05, 0x17);
- pci_write_cfg_byte(0, 7<<3|2, 0x06, 0x01);
- pci_write_cfg_byte(0, 7<<3|2, 0x41, 0x12);
- pci_write_cfg_byte(0, 7<<3|2, 0x42, 0x03);
- pci_write_cfg_byte(0, 7<<3|2, PCI_LATENCY_TIMER, 0x40);
-
- pci_write_cfg_byte(0, 7<<3|3, 0x05, 0x17);
- pci_write_cfg_byte(0, 7<<3|3, 0x06, 0x01);
- pci_write_cfg_byte(0, 7<<3|3, 0x41, 0x12);
- pci_write_cfg_byte(0, 7<<3|3, 0x42, 0x03);
- pci_write_cfg_byte(0, 7<<3|3, PCI_LATENCY_TIMER, 0x40);
-
-
-}
+++ /dev/null
-#ifndef VIA686_H_
-#define VIA686_H_
-
-
-#define CMOS_ADDR 0x70
-#define CMOS_DATA 0x71
-
-#define I8259_MASTER_CONTROL 0x20
-#define I8259_MASTER_MASK 0x21
-
-#define I8259_SLAVE_CONTROL 0xA0
-#define I8259_SLAVE_MASK 0xA1
-
-#define SIO_CONFIG_ADDR 0x3F0
-#define SIO_CONFIG_DATA 0x3F1
-
-#define SIO_WRITE_CONFIG(addr, byte) \
- out_byte(SIO_CONFIG_ADDR, addr); \
- out_byte(SIO_CONFIG_DATA, byte);
-
-#define SIO_READ_CONFIG(addr, byte) \
- out_byte(SIO_CONFIG_ADDR, addr); \
- byte = in_byte(SIO_CONFIG_DATA);
-
-void via_init(void);
-
-void via_calibrate_bus_freq(void);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Hyperion Entertainment, Hans-JoergF@hyperion-entertainment.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include "memio.h"
-#include <part.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned char *cursor_position;
-unsigned int cursor_row;
-unsigned int cursor_col;
-
-unsigned char current_attr;
-
-unsigned int video_numrows = 25;
-unsigned int video_numcols = 80;
-unsigned int video_scrolls = 0;
-
-#define VIDEO_BASE (unsigned char *)0xFD0B8000
-#define VIDEO_ROWS video_numrows
-#define VIDEO_COLS video_numcols
-#define VIDEO_PITCH (2 * video_numcols)
-#define VIDEO_SIZE (video_numrows * video_numcols * 2)
-#define VIDEO_NAME "vga"
-
-void video_test(void);
-void video_putc(char ch);
-void video_puts(char *string);
-void video_scroll(int rows);
-void video_banner(void);
-int video_init(void);
-int video_start(void);
-int video_rows(void);
-int video_cols(void);
-
-char *prompt_string = "=>";
-unsigned char video_get_attr(void);
-
-void video_set_color(unsigned char attr)
-{
- unsigned char *fb = (unsigned char *)VIDEO_BASE;
- int i;
-
- current_attr = video_get_attr();
-
- for (i=0; i<VIDEO_SIZE; i+=2)
- {
- *(fb+i+1) = current_attr;
- }
-}
-
-unsigned char video_get_attr(void)
-{
- char *s;
- unsigned char attr;
-
- attr = 0x0f;
-
- s = getenv("vga_fg_color");
- if (s)
- {
- attr = atoi(s);
- }
-
- s = getenv("vga_bg_color");
- if (s)
- {
- attr |= atoi(s)<<4;
- }
-
- return attr;
-}
-
-int video_inited = 0;
-
-int drv_video_init(void)
-{
- int error, devices = 1 ;
- struct stdio_dev vgadev ;
- if (video_inited) return 1;
- video_inited = 1;
- video_init();
- memset (&vgadev, 0, sizeof(vgadev));
-
- strcpy(vgadev.name, VIDEO_NAME);
- vgadev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_SYSTEM;
- vgadev.putc = video_putc;
- vgadev.puts = video_puts;
- vgadev.getc = NULL;
- vgadev.tstc = NULL;
- vgadev.start = video_start;
-
- error = stdio_register (&vgadev);
-
- if (error == 0)
- {
- char *s = getenv("stdout");
- if (s && strcmp(s, VIDEO_NAME)==0)
- {
- if (overwrite_console()) return 1;
- error = console_assign(stdout, VIDEO_NAME);
- if (error == 0) return 1;
- else return error;
- }
- return 1;
- }
-
- return error;
-}
-
-int video_init(void)
-{
- cursor_position = VIDEO_BASE; /* Color text display base */
- cursor_row = 0;
- cursor_col = 0;
- current_attr = video_get_attr(); /* Currently selected value for attribute. */
-/* video_test(); */
- video_set_color(current_attr);
-
- return 0;
-}
-
-void video_set_cursor(int line, int column)
-{
- unsigned short offset = line*video_numcols + column;
- cursor_position = VIDEO_BASE + line*VIDEO_PITCH + column*2;
- out_byte(0x3D4, 0x0E);
- out_byte(0x3D5, offset/256);
- out_byte(0x3D4, 0x0F);
- out_byte(0x3D5, offset%256);
-}
-
-void video_write_char(int character)
-{
- *cursor_position = character;
- *(cursor_position+1) = current_attr;
-}
-
-void video_test(void)
-{
-
-}
-
-void video_putc(char ch)
-{
- switch(ch)
- {
- case '\n':
- cursor_col = 0;
- cursor_row += 1;
- break;
- case '\r':
- cursor_col = 0;
- break;
- case '\b':
- if (cursor_col) cursor_col--;
- else return;
- break;
- case '\t':
- cursor_col = (cursor_col/8+1)*8;
- break;
- default:
- video_write_char(ch);
- cursor_col++;
- if (cursor_col > VIDEO_COLS-1)
- {
- cursor_row++;
- cursor_col=0;
- }
- }
-
- if (cursor_row > VIDEO_ROWS-1)
- video_scroll(1);
- video_set_cursor(cursor_row, cursor_col);
-}
-
-void video_scroll(int rows)
-{
- unsigned short clear = ((unsigned short)current_attr) | (' '<<8);
- unsigned short* addr16 = &((unsigned short *)VIDEO_BASE)[(VIDEO_ROWS-rows)*VIDEO_COLS];
- int i;
- char *s;
-
- s = getenv("vga_askscroll");
- video_scrolls += rows;
-
- if (video_scrolls >= video_numrows)
- {
- if (s && strcmp(s, "yes"))
- {
- while (-1 == tstc());
- }
-
- video_scrolls = 0;
- }
-
-
- memcpy(VIDEO_BASE, VIDEO_BASE+rows*(VIDEO_COLS*2), (VIDEO_ROWS-rows)*(VIDEO_COLS*2));
- for (i = 0 ; i < rows * VIDEO_COLS ; i++)
- addr16[i] = clear;
- cursor_row-=rows;
- cursor_col=0;
-}
-
-void video_puts(char *string)
-{
- while (*string)
- {
- video_putc(*string);
- string++;
- }
-}
-
-int video_start(void)
-{
- return 0;
-}
-
-unsigned char video_single_box[] =
-{
- 218, 196, 191,
- 179, 179,
- 192, 196, 217
-};
-
-unsigned char video_double_box[] =
-{
- 201, 205, 187,
- 186, 186,
- 200, 205, 188
-};
-
-unsigned char video_single_title[] =
-{
- 195, 196, 180, 180, 195
-};
-
-unsigned char video_double_title[] =
-{
- 204, 205, 185, 181, 198
-};
-
-#define SINGLE_BOX 0
-#define DOUBLE_BOX 1
-
-unsigned char *video_addr(int x, int y)
-{
- return VIDEO_BASE + 2*(VIDEO_COLS*y) + 2*x;
-}
-
-void video_bios_print_string(char *s, int x, int y, int attr, int count)
-{
- int cattr = current_attr;
- if (attr != -1) current_attr = attr;
- video_set_cursor(x,y);
- while (count)
- {
- char c = *s++;
- if (attr == -1) current_attr = *s++;
- video_putc(c);
- count--;
- }
-}
-
-void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h)
-{
- unsigned char *fb, *fb2;
- unsigned char *st = (style == SINGLE_BOX)?video_single_box : video_double_box;
- unsigned char *ti = (style == SINGLE_BOX)?video_single_title : video_double_title;
- int i;
-
- fb = video_addr(x,y);
- *(fb) = st[0];
- *(fb+1) = attr;
- fb += 2;
-
- fb2 = video_addr(x,y+h-1);
- *(fb2) = st[5];
- *(fb2+1) = attr;
- fb2 += 2;
-
- for (i=0; i<w-2;i++)
- {
- *fb = st[1];
- fb++;
- *fb = attr;
- fb++;
-
- *fb2 = st[6];
- fb2++;
- *fb2 = attr;
- fb2++;
-
- }
- *fb = st[2];
- *(fb+1) = attr;
-
- *fb2 = st[7];
- *(fb2+1) = attr;
-
- fb = video_addr(x, y+1);
- fb2 = video_addr(x+w-1, y+1);
- for (i=0; i<h-2; i++)
- {
- *fb = st[3];
- *(fb+1) = attr; fb += 2*VIDEO_COLS;
-
- *fb2 = st[4];
- *(fb2+1) = attr; fb2 += 2*VIDEO_COLS;
- }
-
- /* Draw title */
- if (title)
- {
- if (separate == 0)
- {
- fb = video_addr(x+1, y);
- *fb = ti[3];
- fb += 2;
- *fb = ' ';
- fb += 2;
- while (*title)
- {
- *fb = *title;
- fb ++;
- *fb = attr;
- fb++; title++;
- }
- *fb = ' ';
- fb += 2;
- *fb = ti[4];
- }
- else
- {
- fb = video_addr(x, y+2);
- *fb = ti[0];
- fb += 2;
- for (i=0; i<w-2; i++)
- {
- *fb = ti[1];
- *(fb+1) = attr;
- fb += 2;
- }
- *fb = ti[2];
- *(fb+1) = attr;
- fb = video_addr(x+1, y+1);
- for (i=0; i<w-2; i++)
- {
- *fb = ' ';
- *(fb+1) = attr;
- fb += 2;
- }
- fb = video_addr(x+2, y+1);
-
- while (*title)
- {
- *fb = *title;
- *(fb+1) = attr;
- fb += 2;
- title++;
- }
- }
- }
-
-}
-
-void video_draw_text(int x, int y, int attr, char *text)
-{
- unsigned char *fb = video_addr(x,y);
- while (*text)
- {
- *fb++ = *text++;
- *fb++ = attr;
- }
-}
-
-void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr)
-{
- unsigned char *save = (unsigned char *)save_area;
- unsigned char *fb = video_addr(x,y);
- int i,j;
- for (i=0; i<h; i++)
- {
- unsigned char *fbb = fb;
- for (j=0; j<w; j++)
- {
- *save ++ = *fb;
- if (clearchar > 0) *fb = clearchar;
- fb ++;
- *save ++ = *fb;
- if (clearattr > 0) *fb = clearattr;
- }
- fb = fbb + 2*VIDEO_COLS;
- }
-}
-
-void video_restore_rect(int x, int y, int w, int h, void *save_area)
-{
- unsigned char *save = (unsigned char *)save_area;
- unsigned char *fb = video_addr(x,y);
- int i,j;
- for (i=0; i<h; i++)
- {
- unsigned char *fbb = fb;
- for (j=0; j<w; j++)
- {
- *fb ++ = *save ++;
- *fb ++ = *save ++;
- }
- fb = fbb + 2*VIDEO_COLS;
- }
-
-}
-
-int video_rows(void)
-{
- return VIDEO_ROWS;
-}
-
-int video_cols(void)
-{
- return VIDEO_COLS;
-}
-
-void video_size(int cols, int rows)
-{
- video_numrows = rows;
- video_numcols = cols;
-}
-
-void video_clear(void)
-{
- unsigned short *fbb = (unsigned short *)0xFD0B8000;
- int i,j;
- unsigned short val = 0x2000 | current_attr;
-
- for (i=0; i<video_rows(); i++)
- {
- for (j=0; j<video_cols(); j++)
- {
- *fbb++ = val;
- }
- }
- video_set_cursor(0,0);
- cursor_row = 0;
- cursor_col = 0;
-}
-
-#ifdef EASTEREGG
-int video_easteregg_active = 0;
-
-void video_easteregg(void)
-{
- video_easteregg_active = 1;
-}
-#endif
-
-extern block_dev_desc_t * ide_get_dev(int dev);
-extern char version_string[];
-
-void video_banner(void)
-{
- block_dev_desc_t *ide;
- int i;
- char *s;
- int maxdev;
-
-
- if (video_inited == 0) return;
-#ifdef EASTEREGG
- if (video_easteregg_active)
- {
- prompt_string="";
- video_clear();
- printf("\n");
- printf(" **** COMMODORE 64 BASIC X2 ****\n\n");
- printf(" 64K RAM SYSTEM 38911 BASIC BYTES FREE\n\n");
- printf("READY\n");
- }
- else
- {
-#endif
- s = getenv("ide_maxbus");
- if (s)
- maxdev = atoi(s) * 2;
- else
- maxdev = 4;
-
- s = getenv("stdout");
- if (s && strcmp(s, "serial") == 0)
- return;
-
- video_clear();
- printf("%s\n\nCPU: ", version_string);
- checkcpu();
- printf("DRAM: %ld MB\n", gd->bd->bi_memsize/(1024*1024));
- printf("FSB: %ld MHz\n", gd->bd->bi_busfreq/1000000);
-
- printf("\n---- Disk summary ----\n");
- for (i = 0; i < maxdev; i++)
- {
- ide = ide_get_dev(i);
- printf("Device %d: ", i);
- dev_print(ide);
- }
-
-/*
- video_draw_box(SINGLE_BOX, 0x0F, "Test 1", 0, 0,18, 72, 4);
- video_draw_box(DOUBLE_BOX, 0x0F, "Test 2", 1, 4,10, 50, 6);
- video_draw_box(DOUBLE_BOX, 0x0F, "Test 3", 0, 40, 3, 20, 5);
-
- video_draw_text(1, 4, 0x2F, "Highlighted options");
- video_draw_text(1, 5, 0x0F, "Non-selected option");
- video_draw_text(1, 6, 0x07, "disabled option");
-*/
-#ifdef EASTEREGG
- }
-#endif
-}
+++ /dev/null
-#include <common.h>
-#include <command.h>
-
-int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] )
-{
-/* printf("<NOT YET IMPLEMENTED>\n"); */
- return 0;
-}
-
-#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
-U_BOOT_CMD(
- menu, 1, 1, do_menu,
- "display BIOS setup menu",
- ""
-);
-#endif
case 0x0:
case 0x80: /* refresh period is 15.625 usec */
sdram_config_reg =
- (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
+ (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_CLK)
/ (float) 1000000.0);
break;
case 0x1:
case 0x81: /* refresh period is 3.9 usec */
sdram_config_reg =
- (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x2:
case 0x82: /* refresh period is 7.8 usec */
sdram_config_reg =
- (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x3:
case 0x83: /* refresh period is 31.3 usec */
sdram_config_reg =
- (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x4:
case 0x84: /* refresh period is 62.5 usec */
sdram_config_reg =
- (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x5:
case 0x85: /* refresh period is 125 usec */
sdram_config_reg =
- (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
default: /* refresh period undefined */
case 0x0:
case 0x80: /* refresh period is 15.625 usec */
sdram_config_reg =
- (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
+ (unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_CLK)
/ (float) 1000000.0);
break;
case 0x1:
case 0x81: /* refresh period is 3.9 usec */
sdram_config_reg =
- (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x2:
case 0x82: /* refresh period is 7.8 usec */
sdram_config_reg =
- (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x3:
case 0x83: /* refresh period is 31.3 usec */
sdram_config_reg =
- (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x4:
case 0x84: /* refresh period is 62.5 usec */
sdram_config_reg =
- (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
case 0x5:
case 0x85: /* refresh period is 125 usec */
sdram_config_reg =
- (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
+ (unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_CLK) /
(float) 1000000.0);
break;
default: /* refresh period undefined */
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
TEXT_BASE = 0x00000000
-LDSCRIPT = $(obj)board/atmel/atstk1000/u-boot.lds
+LDSCRIPT = $(src)board/atmel/atstk1000/u-boot.lds
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
TEXT_BASE = 0x00000000
-LDSCRIPT = $(obj)board/earthlcd/favr-32-ezkit/u-boot.lds
+LDSCRIPT = $(src)board/earthlcd/favr-32-ezkit/u-boot.lds
#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
/* from tclk */
- clock = (CONFIG_SYS_BUS_HZ/(16*rate)) - 1;
+ clock = (CONFIG_SYS_BUS_CLK/(16*rate)) - 1;
#else
clock = (3686400/(16*rate)) - 1;
#endif
return (void *)pGD;
}
-void video_set_lut (unsigned int index, /* color number */
- unsigned char r, /* red */
- unsigned char g, /* green */
- unsigned char b /* blue */
- )
-{
- return;
-}
-
#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
#endif /* CONFIG_FSL_DIU_FB */
/* Only 2 PCIe ports used on ICON, so the last one is 1 */
return 1;
}
+
+/*
+ * Video
+ */
+#ifdef CONFIG_VIDEO_SM501
+#include <sm501.h>
+
+#define DISPLAY_WIDTH 640
+#define DISPLAY_HEIGHT 480
+
+static const SMI_REGS sm502_init_regs[] = {
+ {0x00004, 0x0},
+ {0x00040, 0x00021847},
+ {0x00044, 0x091a0a01}, /* 24 MHz pixclk */
+ {0x00054, 0x0},
+ {0x00048, 0x00021847},
+ {0x0004C, 0x091a0a01},
+ {0x00054, 0x1},
+ {0x80004, 0xc428bb17},
+ {0x8000C, 0x00000000},
+ {0x80010, 0x0a000a00},
+ {0x80014, 0x02800000},
+ {0x80018, 0x01e00000},
+ {0x8001C, 0x00000000},
+ {0x80020, 0x01e00280},
+ {0x80024, 0x02fa027f},
+ {0x80028, 0x004a0280},
+ {0x8002C, 0x020c01df},
+ {0x80030, 0x000201e7},
+ {0x80200, 0x00010000},
+ {0x00008, 0x20000000}, /* gpio29 is pwm0, LED_PWM */
+ {0x0000C, 0x3f000000}, /* gpio56 - gpio61 as flat panel data pins */
+ {0x10020, 0x25725728}, /* 20 kHz pwm0, 50 % duty cycle, disabled */
+ {0x80000, 0x0f010106}, /* vsync & hsync pos, disp on */
+ {0, 0}
+};
+
+/*
+ * Return a pointer to the register initialization table.
+ */
+const SMI_REGS *board_get_regs(void)
+{
+ return sm502_init_regs;
+}
+
+int board_get_width(void)
+{
+ return DISPLAY_WIDTH;
+}
+
+int board_get_height(void)
+{
+ return DISPLAY_HEIGHT;
+}
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+/*
+ * Return text to be printed besides the logo.
+ */
+void video_get_info_str(int line_number, char *info)
+{
+ if (line_number == 1)
+ strcpy(info, " Board: ICON");
+ else
+ info[0] = '\0';
+}
+#endif
+
+#endif /* CONFIG_VIDEO_SM501 */
--- /dev/null
+#
+# List of boards
+#
+# Syntax:
+# white-space separated list of entries;
+# each entry has the following fields:
+#
+# Targetname Architecture CPU Boardname Vendor SoC
+#
+# Unused fields can be specified as "-", or omitted if they
+# are the last field on the line.
+#
+# Lines starting with '#' are comments.
+# Blank lines are ignored.
+#
+# To keep the list sorted, use something like
+#
+# :.,$! sort -f -k2,2 -k3,3 -k6,6 -k5,5 -k1,1
+#
+# Target ARCH CPU Board name Vendor SoC
+###########################################################################
+
+qong arm arm1136 - davedenx mx31
+mx31ads arm arm1136 - freescale mx31
+ep7312 arm arm720t
+impa7 arm arm720t
+SMN42 arm arm720t - siemens lpc2292
+evb4510 arm arm720t - - s3c4510b
+a320evb arm arm920t - faraday a320
+cmc_pu2 arm arm920t - - at91rm9200
+csb637 arm arm920t - - at91rm9200
+kb9202 arm arm920t - - at91rm9200
+m501sk arm arm920t - - at91rm9200
+mp2usb arm arm920t - - at91rm9200
+mx1ads arm arm920t - - imx
+mx1fs2 arm arm920t - - imx
+scb9328 arm arm920t - - imx
+cm4008 arm arm920t - - ks8695
+cm41xx arm arm920t - - ks8695
+VCMA9 arm arm920t vcma9 mpl s3c24x0
+netstar arm arm925t
+meesc arm arm926ejs - esd at91
+otc570 arm arm926ejs - esd at91
+pm9261 arm arm926ejs - ronetix at91
+pm9263 arm arm926ejs - ronetix at91
+suen3 arm arm926ejs km_arm keymile kirkwood
+rd6281a arm arm926ejs - Marvell kirkwood
+mx51evk arm arm_cortexa8 mx51evk freescale mx51
+actux1 arm ixp
+actux2 arm ixp
+actux3 arm ixp
+actux4 arm ixp
+ixdp425 arm ixp
+cerf250 arm pxa
+cradle arm pxa
+csb226 arm pxa
+delta arm pxa
+innokom arm pxa
+logodl arm pxa
+lubbock arm pxa
+pleb2 arm pxa
+xaeniax arm pxa
+xm250 arm pxa
+B2 arm s3c44b0 - dave
+assabet arm sa1100
+dnp1110 arm sa1100
+gcplus arm sa1100
+lart arm sa1100
+shannon arm sa1100
+mimc200 avr32 at32ap - mimc at32ap700x
+eNET i386 i386 - - sc520
+idmr m68k mcf52x2
+TASREG m68k mcf52x2 tasreg esd
+M5272C3 m68k mcf52x2 m5272c3 freescale
+EP2500 m68k mcf52x2 ep2500 Mercury
+purple mips mips
+tb0229 mips mips
+EP1C20 nios2 nios2 ep1c20 altera
+EP1S10 nios2 nios2 ep1s10 altera
+EP1S40 nios2 nios2 ep1s40 altera
+PCI5441 nios2 nios2 pci5441 psyent
+PK1C20 nios2 nios2 pk1c20 psyent
+P3G4 powerpc 74xx_7xx evb64260
+ppmc7xx powerpc 74xx_7xx
+ZUMA powerpc 74xx_7xx evb64260
+BAB7xx powerpc 74xx_7xx bab7xx eltec
+ELPPC powerpc 74xx_7xx elppc eltec
+CPCI750 powerpc 74xx_7xx cpci750 esd
+DB64360 powerpc 74xx_7xx db64360 Marvell
+DB64460 powerpc 74xx_7xx db64460 Marvell
+aria powerpc mpc512x - davedenx
+PATI powerpc mpc5xx pati mpl
+BC3450 powerpc mpc5xxx bc3450
+canmb powerpc mpc5xxx
+cm5200 powerpc mpc5xxx
+hmi1001 powerpc mpc5xxx
+inka4x0 powerpc mpc5xxx
+ipek01 powerpc mpc5xxx
+jupiter powerpc mpc5xxx
+mucmc52 powerpc mpc5xxx
+munices powerpc mpc5xxx
+o2dnt powerpc mpc5xxx
+uc101 powerpc mpc5xxx
+v38b powerpc mpc5xxx
+pf5200 powerpc mpc5xxx - esd
+aev powerpc mpc5xxx tqm5200 tqc
+smmaco4 powerpc mpc5xxx tqm5200 tqc
+spieval powerpc mpc5xxx tqm5200 tqc
+sorcery powerpc mpc8220
+A3000 powerpc mpc824x a3000
+barco powerpc mpc824x
+BMW powerpc mpc824x bmw
+CU824 powerpc mpc824x cu824
+MOUSSE powerpc mpc824x mousse
+MUSENKI powerpc mpc824x musenki
+MVBLUE powerpc mpc824x mvblue
+OXC powerpc mpc824x oxc
+PN62 powerpc mpc824x pn62
+sbc8240 powerpc mpc824x
+utx8245 powerpc mpc824x
+debris powerpc mpc824x - etin
+kvme080 powerpc mpc824x - etin
+atc powerpc mpc8260
+ep8260 powerpc mpc8260
+ep82xxm powerpc mpc8260
+gw8260 powerpc mpc8260
+hymod powerpc mpc8260
+IDS8247 powerpc mpc8260 ids8247
+sacsng powerpc mpc8260
+sbc8260 powerpc mpc8260
+ZPC1900 powerpc mpc8260 zpc1900
+mgcoge powerpc mpc8260 - keymile
+SCM powerpc mpc8260 - siemens
+TQM8272 powerpc mpc8260 tqm8272 tqc
+kmeter1 powerpc mpc83xx kmeter1 keymile
+MVBLM7 powerpc mpc83xx mvblm7 matrix_vision
+TQM834x powerpc mpc83xx tqm834x tqc
+PM854 powerpc mpc85xx pm854
+PM856 powerpc mpc85xx pm856
+stxgp3 powerpc mpc85xx stxgp3 stx
+c2mon powerpc mpc8xx
+EP88x powerpc mpc8xx ep88x
+ETX094 powerpc mpc8xx etx094
+FLAGADM powerpc mpc8xx flagadm
+GENIETV powerpc mpc8xx genietv
+GTH powerpc mpc8xx gth
+hermes powerpc mpc8xx
+IP860 powerpc mpc8xx ip860
+LANTEC powerpc mpc8xx lantec
+lwmon powerpc mpc8xx
+NX823 powerpc mpc8xx nx823
+quantum powerpc mpc8xx
+R360MPI powerpc mpc8xx r360mpi
+RBC823 powerpc mpc8xx rbc823
+rmu powerpc mpc8xx
+RPXlite powerpc mpc8xx
+spc1920 powerpc mpc8xx
+uc100 powerpc mpc8xx
+MHPC powerpc mpc8xx mhpc eltec
+TOP860 powerpc mpc8xx top860 emk
+kmsupx4 powerpc mpc8xx km8xx keymile
+mgsuvd powerpc mpc8xx km8xx keymile
+KUP4K powerpc mpc8xx kup4k kup
+KUP4X powerpc mpc8xx kup4k kup
+ELPT860 powerpc mpc8xx elpt860 LEOX
+CCM powerpc mpc8xx - siemens
+IAD210 powerpc mpc8xx - siemens
+pcu_e powerpc mpc8xx - siemens
+QS823 powerpc mpc8xx qs850 snmc
+QS850 powerpc mpc8xx qs850 snmc
+QS860T powerpc mpc8xx qs860t snmc
+stxxtc powerpc mpc8xx stxxtc stx
+HMI10 powerpc mpc8xx tqm8xx tqc
+SM850 powerpc mpc8xx tqm8xx tqc
+AMX860 powerpc mpc8xx amx860 westel
+csb272 powerpc ppc4xx
+csb472 powerpc ppc4xx
+ERIC powerpc ppc4xx eric
+G2000 powerpc ppc4xx g2000
+JSE powerpc ppc4xx jse
+korat powerpc ppc4xx
+lwmon5 powerpc ppc4xx
+ML2 powerpc ppc4xx
+sbc405 powerpc ppc4xx
+sc3 powerpc ppc4xx
+zeus powerpc ppc4xx
+acadia powerpc ppc4xx - amcc
+bamboo powerpc ppc4xx - amcc
+bubinga powerpc ppc4xx - amcc
+ebony powerpc ppc4xx - amcc
+katmai powerpc ppc4xx - amcc
+luan powerpc ppc4xx - amcc
+makalu powerpc ppc4xx - amcc
+ocotea powerpc ppc4xx - amcc
+redwood powerpc ppc4xx - amcc
+taihu powerpc ppc4xx - amcc
+taishan powerpc ppc4xx - amcc
+yucca powerpc ppc4xx - amcc
+AP1000 powerpc ppc4xx ap1000 amirix
+CRAYL1 powerpc ppc4xx L1 cray
+ADCIOP powerpc ppc4xx adciop esd
+APC405 powerpc ppc4xx apc405 esd
+AR405 powerpc ppc4xx ar405 esd
+ASH405 powerpc ppc4xx ash405 esd
+CANBT powerpc ppc4xx canbt esd
+CMS700 powerpc ppc4xx cms700 esd
+CPCI2DP powerpc ppc4xx cpci2dp esd
+DP405 powerpc ppc4xx dp405 esd
+DU405 powerpc ppc4xx du405 esd
+DU440 powerpc ppc4xx du440 esd
+HH405 powerpc ppc4xx hh405 esd
+HUB405 powerpc ppc4xx hub405 esd
+PCI405 powerpc ppc4xx pci405 esd
+PLU405 powerpc ppc4xx plu405 esd
+PMC405 powerpc ppc4xx pmc405 esd
+PMC440 powerpc ppc4xx pmc440 esd
+VOH405 powerpc ppc4xx voh405 esd
+VOM405 powerpc ppc4xx vom405 esd
+WUH405 powerpc ppc4xx wuh405 esd
+neo powerpc ppc4xx - gdsys
+icon powerpc ppc4xx - mosaixtech
+MIP405 powerpc ppc4xx mip405 mpl
+PIP405 powerpc ppc4xx pip405 mpl
+alpr powerpc ppc4xx - prodrive
+p3p440 powerpc ppc4xx - prodrive
+KAREF powerpc ppc4xx karef sandburst
+grsim sparc leon3 - gaisler
+imx31_litekit arm arm1136 - logicpd mx31
+omap2420h4 arm arm1136 - ti omap24xx
+tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
+armadillo arm arm720t
+modnet50 arm arm720t
+lpc2292sodimm arm arm720t - - lpc2292
+eb_cpux9k2 arm arm920t - BuS at91
+at91rm9200dk arm arm920t - atmel at91rm9200
+at91rm9200ek arm arm920t - atmel at91rm9200
+sbc2410x arm arm920t - - s3c24x0
+smdk2400 arm arm920t - samsung s3c24x0
+smdk2410 arm arm920t - samsung s3c24x0
+voiceblue arm arm925t
+omap1510inn arm arm925t - ti
+afeb9260 arm arm926ejs - - at91
+at91cap9adk arm arm926ejs - atmel at91
+davinci_dvevm arm arm926ejs dvevm davinci davinci
+davinci_sffsdr arm arm926ejs sffsdr davinci davinci
+davinci_sonata arm arm926ejs sonata davinci davinci
+da830evm arm arm926ejs da8xxevm davinci davinci
+da850evm arm arm926ejs da8xxevm davinci davinci
+guruplug arm arm926ejs - Marvell kirkwood
+mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
+openrd_base arm arm926ejs - Marvell kirkwood
+sheevaplug arm arm926ejs - Marvell kirkwood
+imx27lite arm arm926ejs imx27lite logicpd mx27
+magnesium arm arm926ejs imx27lite logicpd mx27
+omap5912osk arm arm926ejs - ti omap
+edminiv2 arm arm926ejs - LaCie orion5x
+omap3_overo arm arm_cortexa8 overo - omap3
+omap3_pandora arm arm_cortexa8 pandora - omap3
+omap3_zoom1 arm arm_cortexa8 zoom1 logicpd omap3
+omap3_zoom2 arm arm_cortexa8 zoom2 logicpd omap3
+omap3_beagle arm arm_cortexa8 beagle ti omap3
+omap3_evm arm arm_cortexa8 evm ti omap3
+omap3_sdp3430 arm arm_cortexa8 sdp3430 ti omap3
+devkit8000 arm arm_cortexa8 devkit8000 timll omap3
+smdkc100 arm arm_cortexa8 smdkc100 samsung s5pc1xx
+ixdpg425 arm ixp
+lpd7a400 arm lh7a40x lpd7a40x
+lpd7a404 arm lh7a40x lpd7a40x
+pxa255_idp arm pxa
+wepep250 arm pxa
+xsengine arm pxa
+zylonite arm pxa
+atngw100 avr32 at32ap - atmel at32ap700x
+atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
+atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
+atstk1004 avr32 at32ap atstk1000 atmel at32ap700x
+atstk1006 avr32 at32ap atstk1000 atmel at32ap700x
+favr-32-ezkit avr32 at32ap - earthlcd at32ap700x
+hammerhead avr32 at32ap - miromico at32ap700x
+bf518f-ezbrd blackfin blackfin
+bf526-ezbrd blackfin blackfin
+bf527-ezkit blackfin blackfin
+bf533-ezkit blackfin blackfin
+bf533-stamp blackfin blackfin
+bf537-minotaur blackfin blackfin
+bf537-pnav blackfin blackfin
+bf537-srv1 blackfin blackfin
+bf537-stamp blackfin blackfin
+bf538f-ezkit blackfin blackfin
+bf548-ezkit blackfin blackfin
+bf561-acvilon blackfin blackfin
+bf561-ezkit blackfin blackfin
+blackstamp blackfin blackfin
+cm-bf527 blackfin blackfin
+cm-bf533 blackfin blackfin
+cm-bf537e blackfin blackfin
+cm-bf537u blackfin blackfin
+cm-bf548 blackfin blackfin
+cm-bf561 blackfin blackfin
+ibf-dsp561 blackfin blackfin
+ip04 blackfin blackfin
+tcm-bf518 blackfin blackfin
+tcm-bf537 blackfin blackfin
+sc520_cdp i386 i386 - - sc520
+sc520_spunk i386 i386 - - sc520
+sc520_spunk_rel i386 i386 sc520_spunk_rel - sc520
+M5208EVBE m68k mcf52x2 m5208evbe freescale
+M5249EVB m68k mcf52x2 m5249evb freescale
+M5253DEMO m68k mcf52x2 m5253demo freescale
+M5253EVBE m68k mcf52x2 m5253evbe freescale
+M5271EVB m68k mcf52x2 m5271evb freescale
+M5275EVB m68k mcf52x2 m5275evb freescale
+M5282EVB m68k mcf52x2 m5282evb freescale
+M53017EVB m68k mcf52x2 m53017evb freescale
+microblaze-generic microblaze microblaze microblaze-generic xilinx
+mpc7448hpc2 powerpc 74xx_7xx mpc7448hpc2 freescale
+pdm360ng powerpc mpc512x
+mecp5123 powerpc mpc512x - esd
+cmi_mpc5xx powerpc mpc5xx cmi
+motionpro powerpc mpc5xxx
+cpci5200 powerpc mpc5xxx - esd
+mecp5200 powerpc mpc5xxx - esd
+Alaska8220 powerpc mpc8220 alaska
+Yukon8220 powerpc mpc8220 alaska
+HIDDEN_DRAGON powerpc mpc824x hidden_dragon
+IPHASE4539 powerpc mpc8260 iphase4539
+ppmc8260 powerpc mpc8260
+RPXsuper powerpc mpc8260 rpxsuper
+rsdproto powerpc mpc8260
+MPC8266ADS powerpc mpc8260 mpc8266ads freescale
+MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
+MPC8349EMDS powerpc mpc83xx mpc8349emds freescale
+MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
+ATUM8548 powerpc mpc85xx atum8548
+socrates powerpc mpc85xx socrates
+MPC8540ADS powerpc mpc85xx mpc8540ads freescale
+MPC8544DS powerpc mpc85xx mpc8544ds freescale
+MPC8560ADS powerpc mpc85xx mpc8560ads freescale
+MPC8568MDS powerpc mpc85xx mpc8568mds freescale
+XPEDITE5200 powerpc mpc85xx xpedite5200 xes
+XPEDITE5370 powerpc mpc85xx xpedite5370 xes
+sbc8641d powerpc mpc86xx
+MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale
+XPEDITE5170 powerpc mpc86xx xpedite5170 xes
+cogent_mpc8xx powerpc mpc8xx cogent
+ESTEEM192E powerpc mpc8xx esteem192e
+RPXClassic powerpc mpc8xx
+RRvision powerpc mpc8xx
+svm_sc8xx powerpc mpc8xx
+pcs440ep powerpc ppc4xx
+quad100hd powerpc ppc4xx
+dlvision powerpc ppc4xx - gdsys
+gdppc440etx powerpc ppc4xx - gdsys
+CPCIISER4 powerpc ppc4xx cpciiser4 esd
+DASA_SIM powerpc ppc4xx dasa_sim esd
+PMC405DE powerpc ppc4xx pmc405de esd
+METROBOX powerpc ppc4xx metrobox sandburst
+XPEDITE1000 powerpc ppc4xx xpedite1000 xes
+grsim_leon2 sparc leon2 - gaisler
+gr_cpci_ax2000 sparc leon3 - gaisler
+gr_ep2s60 sparc leon3 - gaisler
+gr_xc3s_1500 sparc leon3 - gaisler
+davinci_dm355evm arm arm926ejs dm355evm davinci davinci
+davinci_dm365evm arm arm926ejs dm365evm davinci davinci
+davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci
+davinci_schmoogie arm arm926ejs schmoogie davinci davinci
+davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci
#ifndef CONFIG_ARM /* PowerPC and other */
static void print_lnum(const char *, u64);
+#endif
-#ifdef CONFIG_PPC
+#if defined(CONFIG_PPC)
static void print_str(const char *, const char *);
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
-#elif defined(CONFIG_NIOS2) /* Nios-II */
+#elif defined(CONFIG_NIOS2)
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
return 0;
}
-#elif defined(CONFIG_MICROBLAZE) /* ! PPC, which leaves Microblaze */
+
+#elif defined(CONFIG_MICROBLAZE)
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
return 0;
}
-#elif defined(CONFIG_SPARC) /* SPARC */
+#elif defined(CONFIG_SPARC)
+
int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
bd_t *bd = gd->bd;
return 0;
}
-#elif defined(CONFIG_M68K) /* M68K */
+#elif defined(CONFIG_M68K)
+
static void print_str(const char *, const char *);
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#elif defined(CONFIG_BLACKFIN)
+
static void print_str(const char *, const char *);
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
-#else /* ! PPC, which leaves MIPS */
+#elif defined(CONFIG_MIPS)
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
return 0;
}
-#endif /* MIPS */
-#else /* ARM */
+#elif defined(CONFIG_AVR32)
+
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ bd_t *bd = gd->bd;
+
+ print_num ("boot_params", (ulong)bd->bi_boot_params);
+ print_num ("memstart", (ulong)bd->bi_memstart);
+ print_lnum ("memsize", (u64)bd->bi_memsize);
+ print_num ("flashstart", (ulong)bd->bi_flashstart);
+ print_num ("flashsize", (ulong)bd->bi_flashsize);
+ print_num ("flashoffset", (ulong)bd->bi_flashoffset);
+
+ print_eth(0);
+ printf ("ip_addr = %pI4\n", &bd->bi_ip_addr);
+ printf ("baudrate = %lu bps\n", bd->bi_baudrate);
+
+ return 0;
+}
+
+#elif defined(CONFIG_ARM)
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
return 0;
}
-#endif /* CONFIG_ARM XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+#else
+ #error "a case for this architecture does not exist!"
+#endif
static void print_num(const char *name, ulong value)
{
usb_stop();
#endif
-#ifdef CONFIG_AMIGAONEG3SE
- /*
- * We've possible left the caches enabled during
- * bios emulation, so turn them off again
- */
- icache_disable();
- dcache_disable();
-#endif
-
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
#define CONFIG_SYS_ISA_IO_OFFSET 0
#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
-unsigned char INT6_Status;
-
-void fdc_interrupt(void)
-{
- INT6_Status = 0x80;
-}
-
-/* waits for an interrupt (polling) */
-int wait_for_fdc_int(void)
-{
- unsigned long timeout;
- timeout = FDC_TIME_OUT;
- while(((volatile)INT6_Status & 0x80) == 0) {
- timeout--;
- udelay(10);
- if(timeout == 0) /* timeout occured */
- return FALSE;
- }
- INT6_Status = 0;
- return TRUE;
-}
-#endif
-
/* Supporting Functions */
/* reads a Register of the FDC */
unsigned char read_fdc_reg(unsigned int addr)
tmp[0]=val;
}
-#ifndef CONFIG_AMIGAONEG3SE
/* waits for an interrupt (polling) */
int wait_for_fdc_int(void)
{
return TRUE;
}
-#endif
-
/* reads a byte from the FIFO of the FDC and checks direction and RQM bit
of the MSR. returns -1 if timeout, or byte if ok */
int read_fdc_byte(void)
return(fdc_issue_cmd(pCMD,pFG));
}
-#ifndef CONFIG_AMIGAONEG3SE
/* terminates current command, by not servicing the FIFO
* waits for interrupt and fills in the result bytes */
int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
}
return TRUE;
}
-#endif
-#ifdef CONFIG_AMIGAONEG3SE
-int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
-{
- int i;
- for(i=0;i<100;i++)
- udelay(500); /* wait 500usec for fifo overrun */
- while((INT6_Status&0x80)==0x00); /* wait as long as no int has occured */
- for(i=0;i<7;i++) {
- pCMD->result[i]=(unsigned char)read_fdc_byte();
- }
- INT6_Status = 0;
- return TRUE;
-}
-
-#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
-#define disable_interrupts() 0
-#define enable_interrupts() (void)0
-#endif
/* reads data from FDC, seek commands are issued automatic */
int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
return TRUE;
}
-#ifdef CONFIG_AMIGAONEG3SE
-#undef disable_interrupts()
-#undef enable_interrupts()
-#endif
-
/* Scan all drives and check if drive is present and disk is inserted */
int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
{
{
int i;
-#ifdef CONFIG_AMIGAONEG3SE
- irq_install_handler(6, (interrupt_handler_t *)fdc_interrupt, NULL);
- i8259_unmask_irq(6);
-#endif
-
#ifdef CONFIG_SYS_FDC_HW_INIT
fdc_hw_init ();
#endif
};
-#ifndef CONFIG_AMIGAONEG3SE
static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS];
-#else
-static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS] = {0,};
-#endif
block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
-#if !defined(CONFIG_KUP4K) && !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003) &&!defined(CONFIG_CPC45)
+# if !defined(CONFIG_BMS2003) && \
+ !defined(CONFIG_CPC45) && \
+ !defined(CONFIG_KUP4K) && \
+ !defined(CONFIG_KUP4X)
static void ide_led (uchar led, uchar status);
#else
extern void ide_led (uchar led, uchar status);
#endif
#else
-#ifndef CONFIG_AMIGAONEG3SE
#define ide_led(a,b) /* dummy */
-#else
-extern void ide_led(uchar led, uchar status);
-#define LED_IDE1 1
-#define LED_IDE2 2
-#define CONFIG_IDE_LED 1
-#define DEVICE_LED(x) 1
-#endif
#endif
#ifdef CONFIG_IDE_RESET
#endif
unsigned char c;
int i, bus;
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3)
+#if defined(CONFIG_SC3)
unsigned int ata_reset_time = ATA_RESET_TIME;
char *s;
#endif
-#ifdef CONFIG_AMIGAONEG3SE
- unsigned int max_bus_scan;
-#endif
#ifdef CONFIG_IDE_8xx_PCCARD
extern int pcmcia_on (void);
extern int ide_devices_found; /* Initialized in check_ide_device() */
* Wait for IDE to get ready.
* According to spec, this can take up to 31 seconds!
*/
-#ifndef CONFIG_AMIGAONEG3SE
for (bus=0; bus<CONFIG_SYS_IDE_MAXBUS; ++bus) {
int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS);
-#else
- s = getenv("ide_maxbus");
- if (s)
- max_bus_scan = simple_strtol(s, NULL, 10);
- else
- max_bus_scan = CONFIG_SYS_IDE_MAXBUS;
-
- for (bus=0; bus<max_bus_scan; ++bus) {
- int dev = bus * (CONFIG_SYS_IDE_MAXDEVICE / max_bus_scan);
-#endif
#ifdef CONFIG_IDE_8xx_PCCARD
/* Skip non-ide devices from probing */
udelay (100000); /* 100 ms */
ide_outb (dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev));
udelay (100000); /* 100 ms */
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3)
- if ((s = getenv("ide_reset_timeout")) != NULL)
- ata_reset_time = simple_strtol(s, NULL, 10);
-#endif
i = 0;
do {
udelay (10000); /* 10 ms */
c = ide_inb (dev, ATA_STATUS);
i++;
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3)
+#if defined(CONFIG_SC3)
if (i > (ata_reset_time * 100)) {
#else
if (i > (ATA_RESET_TIME * 100)) {
#endif
puts ("** Timeout **\n");
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
-#ifdef CONFIG_AMIGAONEG3SE
- /* If this is the second bus, the first one was OK */
- if (bus != 0) {
- ide_bus_ok[bus] = 0;
- goto skip_bus;
- }
-#endif
return;
}
if ((i >= 100) && ((i%100)==0)) {
WATCHDOG_RESET();
}
-#ifdef CONFIG_AMIGAONEG3SE
- skip_bus:
-#endif
putc ('\n');
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
unsigned char c;
hd_driveid_t *iop = (hd_driveid_t *)iobuf;
-#ifdef CONFIG_AMIGAONEG3SE
- int max_bus_scan;
- char *s;
-#endif
#ifdef CONFIG_ATAPI
int retries = 0;
int do_retry = 0;
device=dev_desc->dev;
printf (" Device %d: ", device);
-#ifdef CONFIG_AMIGAONEG3SE
- s = getenv("ide_maxbus");
- if (s) {
- max_bus_scan = simple_strtol(s, NULL, 10);
- } else {
- max_bus_scan = CONFIG_SYS_IDE_MAXBUS;
- }
- if (device >= max_bus_scan*2) {
- dev_desc->type=DEV_TYPE_UNKNOWN;
- return;
- }
-#endif
-
ide_led (DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
if (((c & ATA_STAT_DRQ) == 0) ||
((c & (ATA_STAT_FAULT|ATA_STAT_ERR)) != 0) ) {
#ifdef CONFIG_ATAPI
-#ifdef CONFIG_AMIGAONEG3SE
- s = getenv("ide_doreset");
- if (s && strcmp(s, "on") == 0)
-#endif
{
/* Need to soft reset the device in case it's an ATAPI... */
debug ("Retrying...\n");
/* ------------------------------------------------------------------------- */
#if defined(CONFIG_IDE_LED) && \
- !defined(CONFIG_AMIGAONEG3SE)&& \
!defined(CONFIG_CPC45) && \
!defined(CONFIG_HMI10) && \
!defined(CONFIG_KUP4K) && \
*/
mask = ATA_STAT_BUSY|ATA_STAT_DRQ;
res = 0;
-#ifdef CONFIG_AMIGAONEG3SE
-# warning THF: Removed LBA mode ???
-#endif
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & mask) != res) {
ide_outb (device, ATA_SECT_NUM, 0);
ide_outb (device, ATA_CYL_LOW, (unsigned char)(buflen & 0xFF));
ide_outb (device, ATA_CYL_HIGH, (unsigned char)((buflen>>8) & 0xFF));
-#ifdef CONFIG_AMIGAONEG3SE
-# warning THF: Removed LBA mode ???
-#endif
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
ide_outb (device, ATA_COMMAND, ATAPI_CMD_PACKET);
unsigned char res,key,asc,ascq;
int notready,unitattn;
-#ifdef CONFIG_AMIGAONEG3SE
- char *s;
- unsigned int timeout, retrycnt;
-
- s = getenv("ide_cd_timeout");
- timeout = s ? (simple_strtol(s, NULL, 10)*1000000)/5 : 0;
-
- retrycnt = 0;
-#endif
-
unitattn=ATAPI_UNIT_ATTN;
notready=ATAPI_DRIVE_NOT_READY;
goto error;
}
-#ifdef CONFIG_AMIGAONEG3SE
- if ((sense_data[2]&0xF)==0x0B) {
- debug ("ABORTED COMMAND...retry\n");
- if (retrycnt++ < 4)
- goto retry;
- return (0xFF);
- }
-
- if ((sense_data[2]&0xf) == 0x02 &&
- sense_data[12] == 0x04 &&
- sense_data[13] == 0x01 ) {
- debug ("Waiting for unit to become active\n");
- udelay(timeout);
- if (retrycnt++ < 4)
- goto retry;
- return 0xFF;
- }
-#endif /* CONFIG_AMIGAONEG3SE */
-
printf ("ERROR: Unknown Sense key %02X ASC %02X ASCQ %02X\n",key,asc,ascq);
error:
debug ("ERROR Sense key %02X ASC %02X ASCQ %02X\n",key,asc,ascq);
return 0;
}
#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
- if (strcmp(argv[1], "vga_fg_color") == 0 ||
- strcmp(argv[1], "vga_bg_color") == 0 ) {
- extern void video_set_color(unsigned char attr);
- extern unsigned char video_get_attr(void);
-
- video_set_color(video_get_attr());
- return 0;
- }
-#endif /* CONFIG_AMIGAONEG3SE */
-
return 0;
}
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_AMIGAONEG3SE
-int console_changed = 0;
-#endif
-
#ifdef CONFIG_SYS_CONSOLE_IS_IN_ENV
/*
* if overwrite_console returns 1, the stdin, stderr and stdout
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_AMIGAONEG3SE
- extern void enable_nvram(void);
- extern void disable_nvram(void);
-#endif
-
#undef DEBUG_ENV
#ifdef DEBUG_ENV
#define DEBUGF(fmt,args...) printf(fmt ,##args)
return (c);
}
-#ifdef CONFIG_AMIGAONEG3SE
-uchar env_get_char_memory (int index)
-{
- uchar retval;
- enable_nvram();
- if (gd->env_valid) {
- retval = ( *((uchar *)(gd->env_addr + index)) );
- } else {
- retval = ( default_environment[index] );
- }
- disable_nvram();
- return retval;
-}
-#else
uchar env_get_char_memory (int index)
{
if (gd->env_valid) {
return ( default_environment[index] );
}
}
-#endif
uchar env_get_char (int index)
{
gd->reloc_off);
#endif
-#ifdef CONFIG_AMIGAONEG3SE
- enable_nvram();
-#endif
-
#ifdef ENV_IS_EMBEDDED
/*
* The environment buffer is embedded with the text segment,
env_relocate_spec ();
}
gd->env_addr = (ulong)&(env_ptr->data);
-
-#ifdef CONFIG_AMIGAONEG3SE
- disable_nvram();
-#endif
}
#ifdef CONFIG_AUTO_COMPLETE
extern uchar default_environment[];
-#ifdef CONFIG_AMIGAONEG3SE
-uchar env_get_char_spec (int index)
-{
-#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
- uchar c;
-
- nvram_read(&c, CONFIG_ENV_ADDR+index, 1);
-
- return c;
-#else
- uchar retval;
- enable_nvram();
- retval = *((uchar *)(gd->env_addr + index));
- disable_nvram();
- return retval;
-#endif
-}
-#else
uchar env_get_char_spec (int index)
{
#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
return *((uchar *)(gd->env_addr + index));
#endif
}
-#endif
void env_relocate_spec (void)
{
int saveenv (void)
{
int rcode = 0;
-#ifdef CONFIG_AMIGAONEG3SE
- enable_nvram();
-#endif
#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE
nvram_write(CONFIG_ENV_ADDR, env_ptr, CONFIG_ENV_SIZE);
#else
if (memcpy ((char *)CONFIG_ENV_ADDR, env_ptr, CONFIG_ENV_SIZE) == NULL)
rcode = 1 ;
-#endif
-#ifdef CONFIG_AMIGAONEG3SE
- udelay(10000);
- disable_nvram();
#endif
return rcode;
}
*/
int env_init (void)
{
-#ifdef CONFIG_AMIGAONEG3SE
- enable_nvram();
-#endif
#if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE)
ulong crc;
uchar data[ENV_SIZE];
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 0;
}
-#ifdef CONFIG_AMIGAONEG3SE
- disable_nvram();
-#endif
return (0);
}
* the License, or (at your option) any later version.
*/
+#ifndef HWCONFIG_TEST
#include <config.h>
#include <common.h>
#include <exports.h>
#include <hwconfig.h>
#include <linux/types.h>
#include <linux/string.h>
+#else
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#define min(a, b) (((a) < (b)) ? (a) : (b))
+#endif /* HWCONFIG_TEST */
static const char *hwconfig_parse(const char *opts, size_t maxlen,
- const char *opt, char stopch, char eqch,
+ const char *opt, char *stopchs, char eqch,
size_t *arglen)
{
size_t optlen = strlen(opt);
if (end - start > maxlen)
return NULL;
- if (str && (str == opts || str[-1] == stopch) &&
- (*end == stopch || *end == eqch || *end == '\0')) {
+ if (str && (str == opts || strpbrk(str - 1, stopchs) == str - 1) &&
+ (strpbrk(end, stopchs) == end || *end == eqch ||
+ *end == '\0')) {
const char *arg_end;
if (!arglen)
if (*end != eqch)
return NULL;
- arg_end = strchr(str, stopch);
+ arg_end = strpbrk(str, stopchs);
if (!arg_end)
*arglen = min(maxlen, strlen(str)) - optlen - 1;
else
if (env_hwconfig)
return hwconfig_parse(env_hwconfig, strlen(env_hwconfig),
- opt, ';', ':', arglen);
+ opt, ";", ':', arglen);
if (board_hwconfig)
return hwconfig_parse(board_hwconfig, strlen(board_hwconfig),
- opt, ';', ':', arglen);
+ opt, ";", ':', arglen);
if (cpu_hwconfig)
return hwconfig_parse(cpu_hwconfig, strlen(cpu_hwconfig),
- opt, ';', ':', arglen);
+ opt, ";", ':', arglen);
return NULL;
}
arg = __hwconfig(opt, &arglen);
if (!arg)
return 0;
- return !!hwconfig_parse(arg, arglen, subopt, ',', '=', NULL);
+ return !!hwconfig_parse(arg, arglen, subopt, ",;", '=', NULL);
}
/*
arg = __hwconfig(opt, &arglen);
if (!arg)
return NULL;
- return hwconfig_parse(arg, arglen, subopt, ',', '=', subarglen);
+ return hwconfig_parse(arg, arglen, subopt, ",;", '=', subarglen);
}
/*
return !strncmp(argstr, subarg, arglen);
}
+
+#ifdef HWCONFIG_TEST
+int main()
+{
+ const char *ret;
+ size_t len;
+
+ setenv("hwconfig", "key1:subkey1=value1,subkey2=value2;key2:value3;;;;"
+ "key3;:,:=;key4", 1);
+
+ ret = hwconfig_arg("key1", &len);
+ printf("%zd %.*s\n", len, (int)len, ret);
+ assert(len == 29);
+ assert(hwconfig_arg_cmp("key1", "subkey1=value1,subkey2=value2"));
+ assert(!strncmp(ret, "subkey1=value1,subkey2=value2", len));
+
+ ret = hwconfig_subarg("key1", "subkey1", &len);
+ printf("%zd %.*s\n", len, (int)len, ret);
+ assert(len == 6);
+ assert(hwconfig_subarg_cmp("key1", "subkey1", "value1"));
+ assert(!strncmp(ret, "value1", len));
+
+ ret = hwconfig_subarg("key1", "subkey2", &len);
+ printf("%zd %.*s\n", len, (int)len, ret);
+ assert(len == 6);
+ assert(hwconfig_subarg_cmp("key1", "subkey2", "value2"));
+ assert(!strncmp(ret, "value2", len));
+
+ ret = hwconfig_arg("key2", &len);
+ printf("%zd %.*s\n", len, (int)len, ret);
+ assert(len == 6);
+ assert(hwconfig_arg_cmp("key2", "value3"));
+ assert(!strncmp(ret, "value3", len));
+
+ assert(hwconfig("key3"));
+ assert(hwconfig_arg("key4", &len) == NULL);
+ assert(hwconfig_arg("bogus", &len) == NULL);
+
+ unsetenv("hwconfig");
+
+ assert(hwconfig(NULL) == 0);
+ assert(hwconfig("") == 0);
+ assert(hwconfig("key3") == 0);
+
+ return 0;
+}
+#endif /* HWCONFIG_TEST */
}
}
#endif /* CONFIG_MENUKEY */
-#endif /* CONFIG_BOOTDELAY */
-
-#ifdef CONFIG_AMIGAONEG3SE
- {
- extern void video_banner(void);
- video_banner();
- }
-#endif
+#endif /* CONFIG_BOOTDELAY */
/*
* Main Loop for Monitor Command Processing
MMC_I_MASK = ~MMC_I_MASK_RXFIFO_RD_REQ;
while (len) {
if (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) {
-#ifdef CONFIG_PXA27X
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
int i;
for (i = min(len, 32); i; i--) {
*dst++ = *((volatile uchar *)&MMC_RXFIFO);
set_GPIO_mode(GPIO6_MMCCLK_MD);
set_GPIO_mode(GPIO8_MMCCS0_MD);
#endif
+#ifdef CONFIG_CPU_MONAHANS /* pxa3xx */
+ CKENA |= CKENA_12_MMC0 | CKENA_13_MMC1;
+#else /* pxa2xx */
CKEN |= CKEN12_MMC; /* enable MMC unit clock */
-
+#endif
MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
MMC_RESTO = MMC_RES_TO_MAX;
MMC_SPI = MMC_SPI_DISABLE;
debug("Detected SD card\n");
break;
}
-#ifdef CONFIG_PXA27X
- udelay(10000);
-#else
udelay(200000);
-#endif
}
if (retries <= 0 || !(IF_TYPE_SD == mmc_dev.if_type)) {
retries = 10;
while (retries-- && resp && !(resp[0] & 0x80000000)) {
-#ifdef CONFIG_PXA27X
- udelay(10000);
-#else
udelay(200000);
-#endif
resp =
mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000,
MMC_CMDAT_R3);
MMC_CLKRT = 0; /* 20 MHz */
resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
-#ifdef CONFIG_PXA27X
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
if (IF_TYPE_SD == mmc_dev.if_type) {
resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1);
resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1);
wday = rtc_read (RTC_DAY_OF_WEEK);
mon = rtc_read (RTC_MONTH);
year = rtc_read (RTC_YEAR);
-#ifdef CONFIG_AMIGAONEG3SE
- wday -= 1; /* VIA 686 stores Sunday = 1, Monday = 2, ... */
-#endif
#ifdef RTC_DEBUG
printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
rtc_write (RTC_YEAR, bin2bcd(tmp->tm_year % 100));
rtc_write (RTC_MONTH, bin2bcd(tmp->tm_mon));
-#ifdef CONFIG_AMIGAONEG3SE
- rtc_write (RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday)+1);
-#else
rtc_write (RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday));
-#endif
rtc_write (RTC_DATE_OF_MONTH, bin2bcd(tmp->tm_mday));
rtc_write (RTC_HOURS, bin2bcd(tmp->tm_hour));
rtc_write (RTC_MINUTES, bin2bcd(tmp->tm_min ));
out8(RTC(reg),val);
}
-#elif defined(CONFIG_AMIGAONEG3SE)
-
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#include "../board/MAI/AmigaOneG3SE/memio.h"
-
-
-static uchar rtc_read (short reg)
-{
- out_byte(CMOS_ADDR, (uint8)reg);
- return in_byte(CMOS_DATA);
-}
-
-static void rtc_write (short reg, uchar val)
-{
- out_byte(CMOS_ADDR, (uint8)reg);
- out_byte(CMOS_DATA, (uint8)val);
-}
-
#elif defined(CONFIG_EVAL5200)
static uchar rtc_read (short reg)
int spi_claim_bus(struct spi_slave *slave)
{
struct davinci_spi_slave *ds = to_davinci_spi(slave);
- unsigned int scalar, data1_reg_val = 0;
+ unsigned int scalar;
/* Enable the SPI hardware */
writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) |
(1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0);
- /* hold cs active at end of transfer until explicitly de-asserted */
- data1_reg_val = (1 << SPIDAT1_CSHOLD_SHIFT) |
- (slave->cs << SPIDAT1_CSNR_SHIFT);
- writel(data1_reg_val, &ds->regs->dat1);
-
/*
* Including a minor delay. No science here. Should be good even with
* no delay
writel(0, &ds->regs->lvl);
/* enable SPI */
- writel((readl(&ds->regs->gcr1) |
- SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
+ writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
return 0;
}
writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
}
+/*
+ * This functions needs to act like a macro to avoid pipeline reloads in the
+ * loops below. Use always_inline. This gains us about 160KiB/s and the bloat
+ * appears to be zero bytes (da830).
+ */
+__attribute__((always_inline))
+static inline u32 davinci_spi_xfer_data(struct davinci_spi_slave *ds, u32 data)
+{
+ u32 buf_reg_val;
+
+ /* send out data */
+ writel(data, &ds->regs->dat1);
+
+ /* wait for the data to clock in/out */
+ while ((buf_reg_val = readl(&ds->regs->buf)) & SPIBUF_RXEMPTY_MASK)
+ ;
+
+ return buf_reg_val;
+}
+
+static int davinci_spi_read(struct spi_slave *slave, unsigned int len,
+ u8 *rxp, unsigned long flags)
+{
+ struct davinci_spi_slave *ds = to_davinci_spi(slave);
+ unsigned int data1_reg_val;
+
+ /* enable CS hold, CS[n] and clear the data bits */
+ data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
+ (slave->cs << SPIDAT1_CSNR_SHIFT));
+
+ /* wait till TXFULL is deasserted */
+ while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
+ ;
+
+ /* preload the TX buffer to avoid clock starvation */
+ writel(data1_reg_val, &ds->regs->dat1);
+
+ /* keep reading 1 byte until only 1 byte left */
+ while ((len--) > 1)
+ *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val);
+
+ /* clear CS hold when we reach the end */
+ if (flags & SPI_XFER_END)
+ data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
+
+ /* read the last byte */
+ *rxp = davinci_spi_xfer_data(ds, data1_reg_val);
+
+ return 0;
+}
+
+static int davinci_spi_write(struct spi_slave *slave, unsigned int len,
+ const u8 *txp, unsigned long flags)
+{
+ struct davinci_spi_slave *ds = to_davinci_spi(slave);
+ unsigned int data1_reg_val;
+
+ /* enable CS hold and clear the data bits */
+ data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
+ (slave->cs << SPIDAT1_CSNR_SHIFT));
+
+ /* wait till TXFULL is deasserted */
+ while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
+ ;
+
+ /* preload the TX buffer to avoid clock starvation */
+ if (len > 2) {
+ writel(data1_reg_val | *txp++, &ds->regs->dat1);
+ len--;
+ }
+
+ /* keep writing 1 byte until only 1 byte left */
+ while ((len--) > 1)
+ davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
+
+ /* clear CS hold when we reach the end */
+ if (flags & SPI_XFER_END)
+ data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
+
+ /* write the last byte */
+ davinci_spi_xfer_data(ds, data1_reg_val | *txp);
+
+ return 0;
+}
+
+#ifndef CONFIG_SPI_HALF_DUPLEX
+static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len,
+ u8 *rxp, const u8 *txp, unsigned long flags)
+{
+ struct davinci_spi_slave *ds = to_davinci_spi(slave);
+ unsigned int data1_reg_val;
+
+ /* enable CS hold and clear the data bits */
+ data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
+ (slave->cs << SPIDAT1_CSNR_SHIFT));
+
+ /* wait till TXFULL is deasserted */
+ while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
+ ;
+
+ /* keep reading and writing 1 byte until only 1 byte left */
+ while ((len--) > 1)
+ *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
+
+ /* clear CS hold when we reach the end */
+ if (flags & SPI_XFER_END)
+ data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
+
+ /* read and write the last byte */
+ *rxp = davinci_spi_xfer_data(ds, data1_reg_val | *txp);
+
+ return 0;
+}
+#endif
+
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
- struct davinci_spi_slave *ds = to_davinci_spi(slave);
- unsigned int len, data1_reg_val = readl(&ds->regs->dat1);
- unsigned int i_cnt = 0, o_cnt = 0, buf_reg_val;
- const u8 *txp = dout; /* dout can be NULL for read operation */
- u8 *rxp = din; /* din can be NULL for write operation */
+ unsigned int len;
if (bitlen == 0)
/* Finish any previously submitted transfers */
len = bitlen / 8;
- /* do an empty read to clear the current contents */
- readl(&ds->regs->buf);
-
- /* keep writing and reading 1 byte until done */
- while ((i_cnt < len) || (o_cnt < len)) {
- /* read RX buffer and flags */
- buf_reg_val = readl(&ds->regs->buf);
-
- /* if data is available */
- if ((i_cnt < len) &&
- (buf_reg_val & SPIBUF_RXEMPTY_MASK) == 0) {
- /*
- * If there is no read buffer simply
- * ignore the read character
- */
- if (rxp)
- *rxp++ = buf_reg_val & 0xFF;
- /* increment read words count */
- i_cnt++;
- }
-
- /*
- * if the tx buffer is empty and there
- * is still data to transmit
- */
- if ((o_cnt < len) &&
- ((buf_reg_val & SPIBUF_TXFULL_MASK) == 0)) {
- /* write the data */
- data1_reg_val &= ~0xFFFF;
- if (txp)
- data1_reg_val |= *txp++;
- /*
- * Write to DAT1 is required to keep
- * the serial transfer going.
- * We just terminate when we reach the end.
- */
- if ((o_cnt == (len - 1)) && (flags & SPI_XFER_END)) {
- /* clear CS hold */
- writel(data1_reg_val &
- ~(1 << SPIDAT1_CSHOLD_SHIFT),
- &ds->regs->dat1);
- } else {
- /* enable CS hold and write TX register */
- data1_reg_val |= ((1 << SPIDAT1_CSHOLD_SHIFT) |
- (slave->cs << SPIDAT1_CSNR_SHIFT));
- writel(data1_reg_val, &ds->regs->dat1);
- }
- /* increment written words count */
- o_cnt++;
- }
- }
- return 0;
+ if (!dout)
+ return davinci_spi_read(slave, len, din, flags);
+ else if (!din)
+ return davinci_spi_write(slave, len, dout, flags);
+#ifndef CONFIG_SPI_HALF_DUPLEX
+ else
+ return davinci_spi_read_write(slave, len, din, dout, flags);
+#endif
out:
if (flags & SPI_XFER_END) {
- writel(data1_reg_val &
- ~(1 << SPIDAT1_CSHOLD_SHIFT), &ds->regs->dat1);
+ u8 dummy = 0;
+ davinci_spi_write(slave, 1, &dummy, flags);
}
return 0;
}
/*****************************************************************************/
+/*
+ * Do not enforce drivers (or board code) to provide empty
+ * video_set_lut() if they do not support 8 bpp format.
+ * Implement weak default function instead.
+ */
+void __video_set_lut (unsigned int index, unsigned char r,
+ unsigned char g, unsigned char b)
+{
+}
+void video_set_lut (unsigned int, unsigned char, unsigned char, unsigned char)
+ __attribute__((weak, alias("__video_set_lut")));
+
#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
#define FILL_8BIT_332RGB(r,g,b) { \
#include <common.h>
+#include <asm/io.h>
#include <video_fb.h>
#include <sm501.h>
GraphicDevice sm501;
+void write_be32(int off, unsigned int val)
+{
+ out_be32((unsigned __iomem *)(sm501.isaBase + off), val);
+}
+
+void write_le32(int off, unsigned int val)
+{
+ out_le32((unsigned __iomem *)(sm501.isaBase + off), val);
+}
+
+void (*write_reg32)(int off, unsigned int val) = write_be32;
+
/*-----------------------------------------------------------------------------
* SmiSetRegs --
*-----------------------------------------------------------------------------
*/
const SMI_REGS *preg = board_get_regs ();
while (preg->Index) {
- write32 (preg->Index, preg->Value);
+ write_reg32 (preg->Index, preg->Value);
/*
* Insert a delay between
*/
}
}
+#ifdef CONFIG_VIDEO_SM501_PCI
+static struct pci_device_id sm501_pci_tbl[] = {
+ { PCI_VENDOR_ID_SMI, PCI_DEVICE_ID_SMI_501 },
+ {}
+};
+#endif
+
+/*
+ * We do not enforce board code to provide empty/unused
+ * functions for this driver and define weak default
+ * functions here.
+ */
+unsigned int __board_video_init (void)
+{
+ return 0;
+}
+
+unsigned int board_video_init (void)
+ __attribute__((weak, alias("__board_video_init")));
+
+unsigned int __board_video_get_fb (void)
+{
+ return 0;
+}
+
+unsigned int board_video_get_fb (void)
+ __attribute__((weak, alias("__board_video_get_fb")));
+
+void __board_validate_screen (unsigned int base)
+{
+}
+
+void board_validate_screen (unsigned int base)
+ __attribute__((weak, alias("__board_validate_screen")));
+
/*-----------------------------------------------------------------------------
* video_hw_init --
*-----------------------------------------------------------------------------
*/
void *video_hw_init (void)
{
+#ifdef CONFIG_VIDEO_SM501_PCI
+ unsigned int pci_mem_base, pci_mmio_base;
+ unsigned int id;
+ unsigned short device_id;
+ pci_dev_t devbusfn;
+ int mem;
+#endif
unsigned int *vm, i;
memset (&sm501, 0, sizeof (GraphicDevice));
+#ifdef CONFIG_VIDEO_SM501_PCI
+ printf("Video: ");
+
+ /* Look for SM501/SM502 chips */
+ devbusfn = pci_find_devices(sm501_pci_tbl, 0);
+ if (devbusfn < 0) {
+ printf ("PCI Controller not found.\n");
+ goto not_pci;
+ }
+
+ /* Setup */
+ pci_write_config_dword (devbusfn, PCI_COMMAND,
+ (PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
+ pci_read_config_word (devbusfn, PCI_DEVICE_ID, &device_id);
+ pci_read_config_dword (devbusfn, PCI_REVISION_ID, &id);
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &pci_mem_base);
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_1, &pci_mmio_base);
+ sm501.frameAdrs = pci_mem_to_phys (devbusfn, pci_mem_base);
+ sm501.isaBase = pci_mem_to_phys (devbusfn, pci_mmio_base);
+
+ if (sm501.isaBase)
+ write_reg32 = write_le32;
+
+ mem = in_le32 ((unsigned __iomem *)(sm501.isaBase + 0x10));
+ mem = (mem & 0x0000e000) >> 13;
+ switch (mem) {
+ case 1:
+ mem = 8;
+ break;
+ case 2:
+ mem = 16;
+ break;
+ case 3:
+ mem = 32;
+ break;
+ case 4:
+ mem = 64;
+ break;
+ case 5:
+ mem = 2;
+ break;
+ case 0:
+ default:
+ mem = 4;
+ }
+ printf ("PCI SM50%d %d MB\n", ((id & 0xff) == 0xC0) ? 2 : 1, mem);
+not_pci:
+#endif
/*
* Initialization of the access to the graphic chipset Retreive base
* address of the chipset (see board/RPXClassic/eccx.c)
*/
- if ((sm501.isaBase = board_video_init ()) == 0) {
- return (NULL);
+ if (!sm501.isaBase) {
+ sm501.isaBase = board_video_init ();
+ if (!sm501.isaBase)
+ return NULL;
}
- if ((sm501.frameAdrs = board_video_get_fb ()) == 0) {
- return (NULL);
+ if (!sm501.frameAdrs) {
+ sm501.frameAdrs = board_video_get_fb ();
+ if (!sm501.frameAdrs)
+ return NULL;
}
sm501.winSizeX = board_get_width ();
return (&sm501);
}
-
-/*-----------------------------------------------------------------------------
- * video_set_lut --
- *-----------------------------------------------------------------------------
- */
-void video_set_lut (
- unsigned int index, /* color number */
- unsigned char r, /* red */
- unsigned char g, /* green */
- unsigned char b /* blue */
- )
-{
-}
CPPFLAGS += -I..
+# For PowerPC there's no need to compile standalone applications as a
+# relocatable executable. The relocation data is not needed, and
+# also causes the entry point of the standalone application to be
+# inconsistent.
+ifeq ($(ARCH),powerpc)
+AFLAGS := $(filter-out $(RELFLAGS),$(AFLAGS))
+CFLAGS := $(filter-out $(RELFLAGS),$(CFLAGS))
+CPPFLAGS := $(filter-out $(RELFLAGS),$(CPPFLAGS))
+endif
+
all: $(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN) $(ELF)
#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the AmigaOneG3SE board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_AMIGAONEG3SE 1
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R 1
-
-#define CONFIG_VERY_BIG_RAM 1
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks passed to Linux in Hz */
-
-#define CONFIG_BOOTARGS "root=/dev/ram rw ramdisk_size=4096"
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_AMIGA_PARTITION
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FDC
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_PCI
-
-
-#define CONFIG_PCI 1
-/* #define CONFIG_PCI_SCAN_SHOW 1 */
-#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-
-#define atoi(x) simple_strtoul(x,NULL,10)
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "] " /* Monitor Command Prompt */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-/* #undef CONFIG_SYS_HUSH_PARSER */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS 64 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#define CONFIG_SYS_FLASH_MAX_SIZE 0x00080000
-/* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x80000000 /* 2G */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* Reserve 512 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve 128 kB for malloc() */
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \
- CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/* Size in bytes reserved for initial data
- */
-/* HJF: used to be 0x400000 */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_END 0x8000
-#define CONFIG_SYS_GBL_DATA_SIZE 128
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-
-/*
- * Temporary buffer for serial data until the real serial driver
- * is initialised (memtest will destroy this buffer)
- */
-#define CONFIG_SYS_SCONSOLE_ADDR CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_SCONSOLE_SIZE 0x0002000
-
-/* SDRAM 0 - 256MB
- */
-
-/*HJF: #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U*/
-
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-/* PCI Range
- */
-#define CONFIG_SYS_DBAT1L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-/* HJF:
-#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATL_PP_RW)
-#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR) | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATL_PP_RW )
-#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_INIT_RAM_ADDR + 0x20000) | BATU_BL_256M | BATU_VS | BATU_VP)
-*/
-
-/* Init RAM in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-/* This used to be commented out */
-#define CONFIG_SYS_IBAT2L CONFIG_SYS_DBAT2L
-/* This here too */
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-
-
-/* I/O and PCI memory at 0xf0000000
- */
-#define CONFIG_SYS_DBAT3L (0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xf0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- */
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_BUS_HZ 133000000 /* bus speed - 100 mhz */
-#define CONFIG_SYS_CPU_CLK 133000000
-#define CONFIG_SYS_BUS_CLK 133000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* Max number of sectors in one bank */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
-
-/*
- * Environment is stored in NVRAM.
- */
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_ADDR 0xFD0E0000 /* This should be 0xFD0E0000, but we skip bytes to
- * protect softex's settings for now.
- * Original 768 bytes where not enough.
- */
-#define CONFIG_ENV_SIZE 0x8000 /* Size of the Environment. See comment above */
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* stdin/stdout/stderr are in environment */
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_ENV_OVERWRITE 1
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * L2 cache
- */
-#define CONFIG_SYS_L2
-#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-
-/*-----------------------------------------------------------------------
- * IDE ATAPI Configuration
- */
-
-#define CONFIG_ATAPI 1
-#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_IDE_MAXDEVICE 4
-#define CONFIG_ISO_PARTITION 1
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0xFE000000 /* was: via_get_base_addr() */
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1F0
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
-
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_DATA_OFFSET 0
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200
-
-/*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
-/*-----------------------------------------------------------------------
- RTC
-*/
-#define CONFIG_RTC_MC146818
-
-/*-----------------------------------------------------------------------
- * NS16550 Configuration
- */
-
-#define CONFIG_SYS_NS16550
-
-#define CONFIG_SYS_NS16550_COM1 0xFE0003F8
-#define CONFIG_SYS_NS16550_COM2 0xFE0002F8
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-/* base address for ISA I/O
- */
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xFE000000
-
-/* ISA Interrupt stuff (taken from JWL) */
-
-#define ISA_INT1_OCW1 0x21
-#define ISA_INT2_OCW1 0xA1
-#define ISA_INT1_OCW2 0x20
-#define ISA_INT2_OCW2 0xA0
-#define ISA_INT1_OCW3 0x20
-#define ISA_INT2_OCW3 0xA0
-
-#define ISA_INT1_ICW1 0x20
-#define ISA_INT2_ICW1 0xA0
-#define ISA_INT1_ICW2 0x21
-#define ISA_INT2_ICW2 0xA1
-#define ISA_INT1_ICW3 0x21
-#define ISA_INT2_ICW3 0xA1
-#define ISA_INT1_ICW4 0x21
-#define ISA_INT2_ICW4 0xA1
-
-
-/*
- * misc
- */
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SYS_BOARD_ASM_INIT
-#define CONFIG_LAST_STAGE_INIT
-
-/* #define CONFIG_ETHADDR 00:09:D2:10:00:76 */
-/* #define CONFIG_IPADDR 192.168.0.2 */
-/* #define CONFIG_NETMASK 255.255.255.240 */
-/* #define CONFIG_GATEWAYIP 192.168.0.3 */
-
-#define CONFIG_3COM
-/* #define CONFIG_BOOTP_RANDOM_DELAY */
-
-/*
- * USB configuration
- */
-#define CONFIG_USB_UHCI 1
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_USB_KEYBOARD 1
-#define CONFIG_SYS_STDIO_DEREGISTER 1 /* needed by CONFIG_USB_KEYBOARD */
-
-/*
- * Autoboot stuff
- */
-#define CONFIG_BOOTDELAY 5 /* Boot automatically after five seconds */
-#define CONFIG_PREBOOT ""
-#define CONFIG_BOOTCOMMAND "fdcboot; diskboot"
-#define CONFIG_MENUPROMPT \
- "Press any key to interrupt autoboot: %2d ", bootdelay
-#define CONFIG_MENUKEY ' '
-#define CONFIG_MENUCOMMAND "menu"
-/* #define CONFIG_AUTOBOOT_KEYED */
-
-/*
- * Extra ENV stuff
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "stdout=vga\0" \
- "stdin=ps2kbd\0" \
- "ide_doreset=on\0" \
- "ide_maxbus=2\0" \
- "ide_cd_timeout=30\0" \
- "menucmd=menu\0" \
- "pci_irqa=9\0" \
- "pci_irqa_select=edge\0" \
- "pci_irqb=10\0" \
- "pci_irqb_select=edge\0" \
- "pci_irqc=11\0" \
- "pci_irqc_select=edge\0" \
- "pci_irqd=7\0" \
- "pci_irqd_select=edge\0"
-
-
-/* #define CONFIG_MII 1 */
-/* #define CONFIG_BITBANGMII 1 */
-
-
-#endif /* __CONFIG_H */
extern unsigned long bab7xx_get_bus_freq (void);
extern unsigned long bab7xx_get_gclk_freq (void);
#endif
-#define CONFIG_SYS_BUS_HZ bab7xx_get_bus_freq()
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
-#define CONFIG_SYS_CPU_CLK bab7xx_get_gclk_freq()
+#define CONFIG_SYS_BUS_CLK bab7xx_get_bus_freq()
+#define CONFIG_SYS_CPU_CLK bab7xx_get_gclk_freq()
/*
* For booting Linux, the board info and command line data
#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
-#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */
#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
-#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */
#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 200MHZ -> 5.0 ns, 166MHZ -> 6.0, 133MHZ -> 7.50 ns */
/*
* Speed settings are board specific
*/
-#define CONFIG_SYS_BUS_HZ 100000000
-#define CONFIG_SYS_CPU_CLK 400000000
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 100000000
+#define CONFIG_SYS_CPU_CLK 400000000
/*
* For booting Linux, the board info and command line data
#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ 100000000 /* 100 MHz */
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 100000000 /* 100 MHz */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz */
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
* For the detail description refer to the PCIPPC2 user's manual.
*/
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_BUS_HZ 100000000 /* bus speed - 100 mhz */
+#define CONFIG_SYS_BUS_CLK 100000000 /* bus speed - 100 mhz */
#define CONFIG_SYS_CPU_CLK 300000000
-#define CONFIG_SYS_BUS_CLK 100000000
/*
* For booting Linux, the board info and command line data
* For the detail description refer to the PCIPPC2 user's manual.
*/
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_BUS_HZ 100000000 /* bus speed - 100 mhz */
+#define CONFIG_SYS_BUS_CLK 100000000 /* bus speed - 100 mhz */
#define CONFIG_SYS_CPU_CLK 300000000
-#define CONFIG_SYS_BUS_CLK 100000000
/*
* For booting Linux, the board info and command line data
#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
-#define CONFIG_SYS_BUS_HZ 133000000 /* 133 MHz */
-
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
* Network & Ethernet Configuration
*/
#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 1
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
/* Network Configuration */
#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 0
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
/* Network & Ethernet Configuration */
/*==================================*/
#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 1
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
/* Network & Ethernet Configuration */
/*==================================*/
#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 1
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
/* Network & Ethernet Configuration */
#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 1
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
/* Network & Ethernet Configuration */
/*==================================*/
#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 1
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */
+/*
+ * Video options
+ */
+#define CONFIG_VIDEO
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_VIDEO_SM501_PCI
+#define VIDEO_FB_LITTLE_ENDIAN
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
+#endif
+
/*
* Environment
*/
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
#define CONFIG_IBM_EMAC4_V4 /* 440SPe has this EMAC version */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
#define CONFIG_SYS_OCN_CLK 133000000 /* 133 MHz */
-#define CONFIG_SYS_CONFIG_BUS_CLK 133000000
+#define CONFIG_SYS_BUS_CLK 133000000
#define CONFIG_SYS_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
#define CONFIG_750FX /* 750GL/GX/FX */
#define CONFIG_HIGH_BATS /* High BATs supported */
#define CONFIG_SYS_BOARD_NAME "P3M750"
-#define CONFIG_SYS_BUS_HZ 100000000
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 100000000
#define CONFIG_SYS_TCLK 100000000
#elif defined (CONFIG_P3M7448)
#define CONFIG_74xx
#define CONFIG_SYS_BOARD_NAME "P3M7448"
-#define CONFIG_SYS_BUS_HZ 133333333
-#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK 133333333
#define CONFIG_SYS_TCLK 133333333
#endif
#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
/*
* Clocks config
*
- * CONFIG_SYS_BUS_HZ - Bus clock frequency in Hz
- * CONFIG_SYS_BUS_CLK - As above (?)
+ * CONFIG_SYS_BUS_CLK - Bus clock frequency in Hz
* CONFIG_SYS_HZ - Decrementer freq in Hz
*/
-#define CONFIG_SYS_BUS_HZ CONFIG_BUS_CLK
#define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK
#define CONFIG_SYS_HZ 1000
{ \
return uimage_to_cpu (hdr->ih_##f); \
}
-image_get_hdr_l (magic); /* image_get_magic */
-image_get_hdr_l (hcrc); /* image_get_hcrc */
-image_get_hdr_l (time); /* image_get_time */
-image_get_hdr_l (size); /* image_get_size */
-image_get_hdr_l (load); /* image_get_load */
-image_get_hdr_l (ep); /* image_get_ep */
-image_get_hdr_l (dcrc); /* image_get_dcrc */
+image_get_hdr_l (magic) /* image_get_magic */
+image_get_hdr_l (hcrc) /* image_get_hcrc */
+image_get_hdr_l (time) /* image_get_time */
+image_get_hdr_l (size) /* image_get_size */
+image_get_hdr_l (load) /* image_get_load */
+image_get_hdr_l (ep) /* image_get_ep */
+image_get_hdr_l (dcrc) /* image_get_dcrc */
#define image_get_hdr_b(f) \
static inline uint8_t image_get_##f(const image_header_t *hdr) \
{ \
return hdr->ih_##f; \
}
-image_get_hdr_b (os); /* image_get_os */
-image_get_hdr_b (arch); /* image_get_arch */
-image_get_hdr_b (type); /* image_get_type */
-image_get_hdr_b (comp); /* image_get_comp */
+image_get_hdr_b (os) /* image_get_os */
+image_get_hdr_b (arch) /* image_get_arch */
+image_get_hdr_b (type) /* image_get_type */
+image_get_hdr_b (comp) /* image_get_comp */
static inline char *image_get_name (const image_header_t *hdr)
{
{ \
hdr->ih_##f = cpu_to_uimage (val); \
}
-image_set_hdr_l (magic); /* image_set_magic */
-image_set_hdr_l (hcrc); /* image_set_hcrc */
-image_set_hdr_l (time); /* image_set_time */
-image_set_hdr_l (size); /* image_set_size */
-image_set_hdr_l (load); /* image_set_load */
-image_set_hdr_l (ep); /* image_set_ep */
-image_set_hdr_l (dcrc); /* image_set_dcrc */
+image_set_hdr_l (magic) /* image_set_magic */
+image_set_hdr_l (hcrc) /* image_set_hcrc */
+image_set_hdr_l (time) /* image_set_time */
+image_set_hdr_l (size) /* image_set_size */
+image_set_hdr_l (load) /* image_set_load */
+image_set_hdr_l (ep) /* image_set_ep */
+image_set_hdr_l (dcrc) /* image_set_dcrc */
#define image_set_hdr_b(f) \
static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
{ \
hdr->ih_##f = val; \
}
-image_set_hdr_b (os); /* image_set_os */
-image_set_hdr_b (arch); /* image_set_arch */
-image_set_hdr_b (type); /* image_set_type */
-image_set_hdr_b (comp); /* image_set_comp */
+image_set_hdr_b (os) /* image_set_os */
+image_set_hdr_b (arch) /* image_set_arch */
+image_set_hdr_b (type) /* image_set_type */
+image_set_hdr_b (comp) /* image_set_comp */
static inline void image_set_name (image_header_t *hdr, const char *name)
{
#define PCI_DEVICE_ID_SMI_710 0x0710
#define PCI_DEVICE_ID_SMI_712 0x0712
#define PCI_DEVICE_ID_SMI_810 0x0810
+#define PCI_DEVICE_ID_SMI_501 0x0501
#define PCI_VENDOR_ID_HUGHES 0x1273
#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002
BOARD_NAME="" # Name to print in make output
TARGETS=""
+arch=""
+cpu=""
+board=""
+vendor=""
+soc=""
+
+if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
+ # Automatic mode
+ line=`egrep -i "^[[:space:]]*${2}[[:space:]]" boards.cfg` || {
+ echo "make: *** No rule to make target \`$2_config'. Stop." >&2
+ exit 1
+ }
+
+ set ${line}
+ # add default board name if needed
+ [ $# = 3 ] && set ${line} ${1}
+fi
+
while [ $# -gt 0 ] ; do
case "$1" in
--) shift ; break ;;
-a) shift ; APPEND=yes ;;
- -n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
+ -n) shift ; BOARD_NAME="${1%_config}" ; shift ;;
-t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;;
*) break ;;
esac
done
-[ "${BOARD_NAME}" ] || BOARD_NAME="$1"
-
[ $# -lt 4 ] && exit 1
[ $# -gt 6 ] && exit 1
-if [ "${ARCH}" -a "${ARCH}" != "$2" ]; then
- echo "Failed: \$ARCH=${ARCH}, should be '$2' for ${BOARD_NAME}" 1>&2
+CONFIG_NAME="${1%_config}"
+
+[ "${BOARD_NAME}" ] || BOARD_NAME="${CONFIG_NAME}"
+
+arch="$2"
+cpu="$3"
+if [ "$4" = "-" ] ; then
+ board=${BOARD_NAME}
+else
+ board="$4"
+fi
+[ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
+[ $# -gt 5 ] && [ "$6" != "-" ] && soc="$6"
+
+if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
+ echo "Failed: \$ARCH=${ARCH}, should be '${arch}' for ${BOARD_NAME}" 1>&2
exit 1
fi
mkdir -p ${OBJTREE}/include2
cd ${OBJTREE}/include2
rm -f asm
- ln -s ${SRCTREE}/arch/$2/include/asm asm
- LNPREFIX=${SRCTREE}/arch/$2/include/asm/
+ ln -s ${SRCTREE}/arch/${arch}/include/asm asm
+ LNPREFIX=${SRCTREE}/arch/${arch}/include/asm/
cd ../include
rm -f asm
- ln -s ${SRCTREE}/arch/$2/include/asm asm
+ ln -s ${SRCTREE}/arch/${arch}/include/asm asm
else
cd ./include
rm -f asm
- ln -s ../arch/$2/include/asm asm
+ ln -s ../arch/${arch}/include/asm asm
fi
rm -f asm/arch
-if [ -z "$6" -o "$6" = "NULL" ] ; then
- ln -s ${LNPREFIX}arch-$3 asm/arch
+if [ -z "${soc}" ] ; then
+ ln -s ${LNPREFIX}arch-${cpu} asm/arch
else
- ln -s ${LNPREFIX}arch-$6 asm/arch
+ ln -s ${LNPREFIX}arch-${soc} asm/arch
fi
-if [ "$2" = "arm" ] ; then
+if [ "${arch}" = "arm" ] ; then
rm -f asm/proc
ln -s ${LNPREFIX}proc-armv asm/proc
fi
#
# Create include file for Make
#
-echo "ARCH = $2" > config.mk
-echo "CPU = $3" >> config.mk
-echo "BOARD = $4" >> config.mk
+echo "ARCH = ${arch}" > config.mk
+echo "CPU = ${cpu}" >> config.mk
+echo "BOARD = ${board}" >> config.mk
-[ "$5" ] && [ "$5" != "NULL" ] && echo "VENDOR = $5" >> config.mk
+[ "${vendor}" ] && echo "VENDOR = ${vendor}" >> config.mk
-[ "$6" ] && [ "$6" != "NULL" ] && echo "SOC = $6" >> config.mk
+[ "${soc}" ] && echo "SOC = ${soc}" >> config.mk
# Assign board directory to BOARDIR variable
-if [ -z "$5" -o "$5" = "NULL" ] ; then
- BOARDDIR=$4
+if [ -z "${vendor}" ] ; then
+ BOARDDIR=${board}
else
- BOARDDIR=$5/$4
+ BOARDDIR=${vendor}/${board}
fi
#
cat << EOF >> config.h
#define CONFIG_BOARDDIR board/$BOARDDIR
#include <config_defaults.h>
-#include <configs/$1.h>
+#include <configs/${CONFIG_NAME}.h>
#include <asm/config.h>
EOF
#include "fw_env.h"
-#define CMD_GETENV "fw_printenv"
-#define CMD_SETENV "fw_setenv"
+#define WHITESPACE(c) ((c == '\t') || (c == ' '))
#define min(x, y) ({ \
typeof(x) _min1 = (x); \
static int flash_io (int mode);
static char *envmatch (char * s1, char * s2);
-static int env_init (void);
static int parse_config (void);
#if defined(CONFIG_FILE)
return rc;
}
+static char *fw_string_blank(char *s, int noblank)
+{
+ int i;
+ int len = strlen(s);
+
+ for (i = 0; i < len; i++, s++) {
+ if ((noblank && !WHITESPACE(*s)) ||
+ (!noblank && WHITESPACE(*s)))
+ break;
+ }
+ if (i == len)
+ return NULL;
+
+ return s;
+}
+
/*
* Search the environment for a variable.
* Return the value, if found, or NULL, if not found.
{
char *env, *nxt;
- if (env_init ())
+ if (fw_env_open())
return NULL;
for (env = environment.data; *env; env = nxt + 1) {
int i, n_flag;
int rc = 0;
- if (env_init ())
+ if (fw_env_open())
return -1;
if (argc == 1) { /* Print all env variables */
return rc;
}
-/*
- * Deletes or sets environment variables. Returns -1 and sets errno error codes:
- * 0 - OK
- * EINVAL - need at least 1 argument
- * EROFS - certain variables ("ethaddr", "serial#") cannot be
- * modified or deleted
- *
- */
-int fw_setenv (int argc, char *argv[])
+int fw_env_close(void)
{
- int i, len;
- char *env, *nxt;
- char *oldval = NULL;
- char *name;
+ /*
+ * Update CRC
+ */
+ *environment.crc = crc32(0, (uint8_t *) environment.data, ENV_SIZE);
- if (argc < 2) {
- errno = EINVAL;
- return -1;
+ /* write environment back to flash */
+ if (flash_io(O_RDWR)) {
+ fprintf(stderr,
+ "Error: can't write fw_env to flash\n");
+ return -1;
}
- if (env_init ())
- return -1;
+ return 0;
+}
- name = argv[1];
+
+/*
+ * Set/Clear a single variable in the environment.
+ * This is called in sequence to update the environment
+ * in RAM without updating the copy in flash after each set
+ */
+int fw_env_write(char *name, char *value)
+{
+ int len;
+ char *env, *nxt;
+ char *oldval = NULL;
/*
* search if variable with this name already exists
for (nxt = env = environment.data; *env; env = nxt + 1) {
for (nxt = env; *nxt; ++nxt) {
if (nxt >= &environment.data[ENV_SIZE]) {
- fprintf (stderr, "## Error: "
+ fprintf(stderr, "## Error: "
"environment not terminated\n");
errno = EINVAL;
return -1;
}
/* Delete only ? */
- if (argc < 3)
- goto WRITE_FLASH;
+ if (!value || !strlen(value))
+ return 0;
/*
* Append new definition at the end
*/
len = strlen (name) + 2;
/* add '=' for first arg, ' ' for all others */
- for (i = 2; i < argc; ++i) {
- len += strlen (argv[i]) + 1;
- }
+ len += strlen(value) + 1;
+
if (len > (&environment.data[ENV_SIZE] - env)) {
fprintf (stderr,
"Error: environment overflow, \"%s\" deleted\n",
name);
return -1;
}
+
while ((*env = *name++) != '\0')
env++;
+ *env = '=';
+ while ((*++env = *value++) != '\0')
+ ;
+
+ /* end is marked with double '\0' */
+ *++env = '\0';
+
+ return 0;
+}
+
+/*
+ * Deletes or sets environment variables. Returns -1 and sets errno error codes:
+ * 0 - OK
+ * EINVAL - need at least 1 argument
+ * EROFS - certain variables ("ethaddr", "serial#") cannot be
+ * modified or deleted
+ *
+ */
+int fw_setenv(int argc, char *argv[])
+{
+ int i, len;
+ char *name;
+ char *value = NULL;
+ char *tmpval = NULL;
+
+ if (argc < 2) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ if (fw_env_open()) {
+ fprintf(stderr, "Error: environment not initialized\n");
+ return -1;
+ }
+
+ name = argv[1];
+
+ len = strlen(name) + 2;
+ for (i = 2; i < argc; ++i)
+ len += strlen(argv[i]) + 1;
+
+ /* Allocate enough place to the data string */
for (i = 2; i < argc; ++i) {
char *val = argv[i];
-
- *env = (i == 2) ? '=' : ' ';
- while ((*++env = *val++) != '\0');
+ if (!value) {
+ value = (char *)malloc(len - strlen(name));
+ if (!value) {
+ fprintf(stderr,
+ "Cannot malloc %u bytes: %s\n",
+ len - strlen(name), strerror(errno));
+ return -1;
+ }
+ memset(value, 0, len - strlen(name));
+ tmpval = value;
+ }
+ if (i != 2)
+ *tmpval++ = ' ';
+ while (*val != '\0')
+ *tmpval++ = *val++;
}
- /* end is marked with double '\0' */
- *++env = '\0';
+ fw_env_write(name, value);
- WRITE_FLASH:
+ if (value)
+ free(value);
- /*
- * Update CRC
- */
- *environment.crc = crc32 (0, (uint8_t *) environment.data, ENV_SIZE);
+ return fw_env_close();
+}
- /* write environment back to flash */
- if (flash_io (O_RDWR)) {
- fprintf (stderr, "Error: can't write fw_env to flash\n");
+/*
+ * Parse a file and configure the u-boot variables.
+ * The script file has a very simple format, as follows:
+ *
+ * Each line has a couple with name, value:
+ * <white spaces>variable_name<white spaces>variable_value
+ *
+ * Both variable_name and variable_value are interpreted as strings.
+ * Any character after <white spaces> and before ending \r\n is interpreted
+ * as variable's value (no comment allowed on these lines !)
+ *
+ * Comments are allowed if the first character in the line is #
+ *
+ * Returns -1 and sets errno error codes:
+ * 0 - OK
+ * -1 - Error
+ */
+int fw_parse_script(char *fname)
+{
+ FILE *fp;
+ char dump[1024]; /* Maximum line length in the file */
+ char *name;
+ char *val;
+ int lineno = 0;
+ int len;
+ int ret = 0;
+
+ if (fw_env_open()) {
+ fprintf(stderr, "Error: environment not initialized\n");
return -1;
}
- return 0;
+ if (strcmp(fname, "-") == 0)
+ fp = stdin;
+ else {
+ fp = fopen(fname, "r");
+ if (fp == NULL) {
+ fprintf(stderr, "I cannot open %s for reading\n",
+ fname);
+ return -1;
+ }
+ }
+
+ while (fgets(dump, sizeof(dump), fp)) {
+ lineno++;
+ len = strlen(dump);
+
+ /*
+ * Read a whole line from the file. If the line is too long
+ * or is not terminated, reports an error and exit.
+ */
+ if (dump[len - 1] != '\n') {
+ fprintf(stderr,
+ "Line %d not corrected terminated or too long\n",
+ lineno);
+ ret = -1;
+ break;
+ }
+
+ /* Drop ending line feed / carriage return */
+ while (len > 0 && (dump[len - 1] == '\n' ||
+ dump[len - 1] == '\r')) {
+ dump[len - 1] = '\0';
+ len--;
+ }
+
+ /* Skip comment or empty lines */
+ if ((len == 0) || dump[0] == '#')
+ continue;
+
+ /*
+ * Search for variable's name,
+ * remove leading whitespaces
+ */
+ name = fw_string_blank(dump, 1);
+ if (!name)
+ continue;
+
+ /* The first white space is the end of variable name */
+ val = fw_string_blank(name, 0);
+ len = strlen(name);
+ if (val) {
+ *val++ = '\0';
+ if ((val - name) < len)
+ val = fw_string_blank(val, 1);
+ else
+ val = NULL;
+ }
+
+#ifdef DEBUG
+ fprintf(stderr, "Setting %s : %s\n",
+ name, val ? val : " removed");
+#endif
+
+ /*
+ * If there is an error setting a variable,
+ * try to save the environment and returns an error
+ */
+ if (fw_env_write(name, val)) {
+ fprintf(stderr,
+ "fw_env_write returns with error : %s\n",
+ strerror(errno));
+ ret = -1;
+ break;
+ }
+
+ }
+
+ /* Close file if not stdin */
+ if (strcmp(fname, "-") != 0)
+ fclose(fp);
+
+ ret |= fw_env_close();
+
+ return ret;
+
}
/*
/*
* Prevent confusion if running from erased flash memory
*/
-static int env_init (void)
+int fw_env_open(void)
{
int crc0, crc0_ok;
char flag0;
extern int fw_printenv(int argc, char *argv[]);
extern char *fw_getenv (char *name);
extern int fw_setenv (int argc, char *argv[]);
+extern int fw_parse_script(char *fname);
+extern int fw_env_open(void);
+extern int fw_env_write(char *name, char *value);
+extern int fw_env_close(void);
extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned);
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
+#include <getopt.h>
#include "fw_env.h"
#define CMD_PRINTENV "fw_printenv"
#define CMD_SETENV "fw_setenv"
+static struct option long_options[] = {
+ {"script", required_argument, NULL, 's'},
+ {"help", no_argument, NULL, 'h'},
+ {NULL, 0, NULL, 0}
+};
+
+void usage(void)
+{
+
+ fprintf(stderr, "fw_printenv/fw_setenv, "
+ "a command line interface to U-Boot environment\n\n"
+ "usage:\tfw_printenv\n"
+ "\tfw_setenv [variable name] [variable value]\n"
+ "\tfw_setenv -s [ file ]\n"
+ "\tfw_setenv -s - < [ file ]\n\n"
+ "The file passed as argument contains only pairs "
+ "name / value\n"
+ "Example:\n"
+ "# Any line starting with # is treated as comment\n"
+ "\n"
+ "\t netdev eth0\n"
+ "\t kernel_addr 400000\n"
+ "\t var1\n"
+ "\t var2 The quick brown fox jumps over the "
+ "lazy dog\n"
+ "\n"
+ "A variable without value will be dropped. It is possible\n"
+ "to put any number of spaces between the fields, but any\n"
+ "space inside the value is treated as part of the value "
+ "itself.\n\n"
+ );
+}
+
int
main(int argc, char *argv[])
{
char *p;
char *cmdname = *argv;
+ char *script_file = NULL;
+ int c;
if ((p = strrchr (cmdname, '/')) != NULL) {
cmdname = p + 1;
}
+ while ((c = getopt_long (argc, argv, "s:h",
+ long_options, NULL)) != EOF) {
+ switch (c) {
+ case 's':
+ script_file = optarg;
+ break;
+ case 'h':
+ usage();
+ return EXIT_SUCCESS;
+ }
+ }
+
+
if (strcmp(cmdname, CMD_PRINTENV) == 0) {
if (fw_printenv (argc, argv) != 0)
- return (EXIT_FAILURE);
+ return EXIT_FAILURE;
- return (EXIT_SUCCESS);
+ return EXIT_SUCCESS;
} else if (strcmp(cmdname, CMD_SETENV) == 0) {
+ if (!script_file) {
+ if (fw_setenv(argc, argv) != 0)
+ return EXIT_FAILURE;
+ } else {
+ if (fw_parse_script(script_file) != 0)
+ return EXIT_FAILURE;
+ }
- if (fw_setenv (argc, argv) != 0)
- return (EXIT_FAILURE);
-
- return (EXIT_SUCCESS);
+ return EXIT_SUCCESS;
}
"Identity crisis - may be called as `" CMD_PRINTENV
"' or as `" CMD_SETENV "' but not as `%s'\n",
cmdname);
- return (EXIT_FAILURE);
+ return EXIT_FAILURE;
}
projects / people / ms / u-boot.git / commitdiff
