ARM: uniphier: remove kernel parameter settings from environment

Currently, console=ttyS0 is hard-coded in CONFIG_EXTRA_ENV_SETTINGS
and it replaces the bootargs in the chosen node of the device tree
passed to the kernel.  This is not preferable because I am going to
add some boards whose console is not ttyS0.

Drop bootargs settings from U-Boot's environment and use the one in
device tree by default.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index bd0769e6d92f6a609bab71a417d72fadd3dd45e3..f44c58bf9d0f58f5932795a9aa3ff942f41bbf4b 100644 (file)
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -224,22 +224,17 @@
        "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
        "tftpboot; bootm;"
 
-#define CONFIG_BOOTARGS                " earlyprintk loglevel=8"
-
 #ifdef CONFIG_FIT
 #define CONFIG_BOOTFILE                        "fitImage"
 #define LINUXBOOT_ENV_SETTINGS \
        "fit_addr=0x00100000\0" \
        "fit_addr_r=0x84100000\0" \
        "fit_size=0x00f00000\0" \
-       "norboot=run add_default_bootargs &&" \
-               "setexpr fit_addr $nor_base + $fit_addr &&" \
+       "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
                "bootm $fit_addr\0" \
-       "nandboot=run add_default_bootargs &&" \
-               "nand read $fit_addr_r $fit_addr $fit_size &&" \
+       "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
                "bootm $fit_addr_r\0" \
-       "tftpboot=run add_default_bootargs &&" \
-               "tftpboot $fit_addr_r $bootfile &&" \
+       "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
                "bootm $fit_addr_r\0"
 #else
 #define CONFIG_BOOTFILE                        "uImage"
@@ -255,18 +250,15 @@
        "ramdisk_addr_r=0x84a00000\0" \
        "ramdisk_size=0x00600000\0" \
        "ramdisk_file=rootfs.cpio.uboot\0" \
-       "norboot=run add_default_bootargs &&" \
-               "setexpr kernel_addr $nor_base + $kernel_addr &&" \
+       "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
                "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
                "setexpr fdt_addr $nor_base + $fdt_addr &&" \
                "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
-       "nandboot=run add_default_bootargs &&" \
-               "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
+       "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
                "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
                "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
                "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
-       "tftpboot=run add_default_bootargs &&" \
-               "tftpboot $kernel_addr_r $bootfile &&" \
+       "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
                "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
                "tftpboot $fdt_addr_r $fdt_file &&" \
                "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
@@ -281,8 +273,6 @@
                "nand write $loadaddr 0 0x00010000 &&"          \
                "tftpboot u-boot-dtb.img &&"                    \
                "nand write $loadaddr 0x00010000 0x000f0000\0"  \
-       "add_default_bootargs=setenv bootargs $bootargs"        \
-               " console=ttyS0,$baudrate\0"                    \
        LINUXBOOT_ENV_SETTINGS
 
 /* Open Firmware flat tree */