]> git.ipfire.org Git - people/ms/u-boot.git/commitdiff
mpc512x_fec: Move PHY initialization from probe into init routine.
authorDetlev Zundel <dzu@denx.de>
Thu, 8 Apr 2010 09:49:59 +0000 (11:49 +0200)
committerBen Warren <biggerbadderben@gmail.com>
Mon, 3 May 2010 21:52:48 +0000 (14:52 -0700)
This saves the autonegotation delay when not using ethernet in U-Boot

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
drivers/net/mpc512x_fec.c

index 3aba748aa1b94f4cb004352df09b7d5274503905..c580c827a6e8b1c173e089a340a1f0a2c7e93b77 100644 (file)
@@ -160,7 +160,7 @@ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
 }
 
 /********************************************************************/
-static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
+static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, unsigned char *mac)
 {
        u8 currByte;                    /* byte for which to compute the CRC */
        int byte;                       /* loop - counter */
@@ -226,6 +226,12 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
        printf ("mpc512x_fec_init... Begin\n");
 #endif
 
+       mpc512x_fec_set_hwaddr (fec, dev->enetaddr);
+       out_be32(&fec->eth->gaddr1, 0x00000000);
+       out_be32(&fec->eth->gaddr2, 0x00000000);
+
+       mpc512x_fec_init_phy (dev, bis);
+
        /* Set interrupt mask register */
        out_be32(&fec->eth->imask, 0x00000000);
 
@@ -611,8 +617,6 @@ int mpc512x_fec_initialize (bd_t * bis)
        volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
        mpc512x_fec_priv *fec;
        struct eth_device *dev;
-       int i;
-       char *tmp, *end, env_enetaddr[6];
        void * bd;
 
        fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
@@ -663,25 +667,6 @@ int mpc512x_fec_initialize (bd_t * bis)
         */
        out_be32(&fec->eth->ievent, 0xffffffff);
 
-       /*
-        * Try to set the mac address now. The fec mac address is
-        * a garbage after reset. When not using fec for booting
-        * the Linux fec driver will try to work with this garbage.
-        */
-       tmp = getenv ("ethaddr");
-       if (tmp) {
-               for (i=0; i<6; i++) {
-                       env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0;
-                       if (tmp)
-                               tmp = (*end) ? end+1 : end;
-               }
-               mpc512x_fec_set_hwaddr (fec, env_enetaddr);
-               out_be32(&fec->eth->gaddr1, 0x00000000);
-               out_be32(&fec->eth->gaddr2, 0x00000000);
-       }
-
-       mpc512x_fec_init_phy (dev, bis);
-
        return 1;
 }