]> git.ipfire.org Git - people/ms/u-boot.git/commitdiff
net: convert altera_tse to driver model and phylib
authorThomas Chou <thomas@wytron.com.tw>
Thu, 22 Oct 2015 07:29:11 +0000 (15:29 +0800)
committerThomas Chou <thomas@wytron.com.tw>
Fri, 23 Oct 2015 06:55:48 +0000 (14:55 +0800)
Convert altera_tse to driver model and phylib.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
configs/nios2-generic_defconfig
doc/device-tree-bindings/net/altera_tse.txt [new file with mode: 0644]
drivers/net/Kconfig
drivers/net/altera_tse.c
drivers/net/altera_tse.h
include/configs/nios2-generic.h

index ea07b567f518aa34c7ff45e5eab773775cc8fdd4..fbc27ea17f0f7657d48af6ab206ef37f80b47da1 100644 (file)
@@ -18,6 +18,8 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_ALTERA_PIO=y
 CONFIG_MISC=y
 CONFIG_ALTERA_SYSID=y
+CONFIG_DM_ETH=y
+CONFIG_ALTERA_TSE=y
 CONFIG_ALTERA_JTAG_UART=y
 CONFIG_ALTERA_JTAG_UART_BYPASS=y
 CONFIG_TIMER=y
diff --git a/doc/device-tree-bindings/net/altera_tse.txt b/doc/device-tree-bindings/net/altera_tse.txt
new file mode 100644 (file)
index 0000000..cb190df
--- /dev/null
@@ -0,0 +1,112 @@
+* Altera Triple-Speed Ethernet MAC driver (TSE)
+
+Required properties:
+- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
+               be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
+- reg: Address and length of the register set for the device. It contains
+  the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+  "control_port": MAC configuration space region
+  "tx_csr":       xDMA Tx dispatcher control and status space region
+  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
+  "rx_csr" :      xDMA Rx dispatcher control and status space region
+  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
+  "rx_resp":      MSGDMA Rx dispatcher response space region
+  "s1":                  SGDMA descriptor memory
+- interrupts: Should contain the TSE interrupts and it's mode.
+- interrupt-names: Should contain the interrupt names
+  "rx_irq":       xDMA Rx dispatcher interrupt
+  "tx_irq":       xDMA Tx dispatcher interrupt
+- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
+- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
+- phy-mode: See ethernet.txt in the same directory.
+- phy-handle: See ethernet.txt in the same directory.
+- phy-addr: See ethernet.txt in the same directory. A configuration should
+               include phy-handle or phy-addr.
+- altr,has-supplementary-unicast:
+               If present, TSE supports additional unicast addresses.
+               Otherwise additional unicast addresses are not supported.
+- altr,has-hash-multicast-filter:
+               If present, TSE supports a hash based multicast filter.
+               Otherwise, hash-based multicast filtering is not supported.
+
+- mdio device tree subnode: When the TSE has a phy connected to its local
+               mdio, there must be device tree subnode with the following
+               required properties:
+
+       - compatible: Must be "altr,tse-mdio".
+       - #address-cells: Must be <1>.
+       - #size-cells: Must be <0>.
+
+       For each phy on the mdio bus, there must be a node with the following
+       fields:
+
+       - reg: phy id used to communicate to phy.
+       - device_type: Must be "ethernet-phy".
+
+Optional properties:
+- local-mac-address: See ethernet.txt in the same directory.
+- max-frame-size: See ethernet.txt in the same directory.
+
+Example:
+
+       tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
+               compatible = "altr,tse-msgdma-1.0";
+               reg =   <0x00000001 0x00000000 0x00000400>,
+                       <0x00000001 0x00000460 0x00000020>,
+                       <0x00000001 0x00000480 0x00000020>,
+                       <0x00000001 0x000004A0 0x00000008>,
+                       <0x00000001 0x00000400 0x00000020>,
+                       <0x00000001 0x00000420 0x00000020>;
+               reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+               interrupt-parent = <&hps_0_arm_gic_0>;
+               interrupts = <0 41 4>, <0 40 4>;
+               interrupt-names = "rx_irq", "tx_irq";
+               rx-fifo-depth = <2048>;
+               tx-fifo-depth = <2048>;
+               address-bits = <48>;
+               max-frame-size = <1500>;
+               local-mac-address = [ 00 00 00 00 00 00 ];
+               phy-mode = "gmii";
+               altr,has-supplementary-unicast;
+               altr,has-hash-multicast-filter;
+               phy-handle = <&phy0>;
+               mdio {
+                       compatible = "altr,tse-mdio";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       phy0: ethernet-phy@0 {
+                               reg = <0x0>;
+                               device_type = "ethernet-phy";
+                       };
+
+                       phy1: ethernet-phy@1 {
+                               reg = <0x1>;
+                               device_type = "ethernet-phy";
+                       };
+
+               };
+       };
+
+       tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
+               compatible = "altr,tse-msgdma-1.0";
+               reg =   <0x00000001 0x00001000 0x00000400>,
+                       <0x00000001 0x00001460 0x00000020>,
+                       <0x00000001 0x00001480 0x00000020>,
+                       <0x00000001 0x000014A0 0x00000008>,
+                       <0x00000001 0x00001400 0x00000020>,
+                       <0x00000001 0x00001420 0x00000020>;
+               reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+               interrupt-parent = <&hps_0_arm_gic_0>;
+               interrupts = <0 43 4>, <0 42 4>;
+               interrupt-names = "rx_irq", "tx_irq";
+               rx-fifo-depth = <2048>;
+               tx-fifo-depth = <2048>;
+               address-bits = <48>;
+               max-frame-size = <1500>;
+               local-mac-address = [ 00 00 00 00 00 00 ];
+               phy-mode = "gmii";
+               altr,has-supplementary-unicast;
+               altr,has-hash-multicast-filter;
+               phy-handle = <&phy1>;
+       };
index bbec6a60e01a42b4411bd6b75d0d5d8fc6ab93ac..a03a95d0fbff6e27db930198f30a15d8f56490c6 100644 (file)
@@ -25,6 +25,15 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config ALTERA_TSE
+       bool "Altera Triple-Speed Ethernet MAC support"
+       depends on DM_ETH
+       select PHYLIB
+       help
+         This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
+         Please find details on the "Triple-Speed Ethernet MegaCore Function
+         Resource Center" of Altera.
+
 config E1000
        bool "Intel PRO/1000 Gigabit Ethernet support"
        help
index ad3bd1e2124059f7da1fed4f37859f7ec6e7f69e..319983c4829bb9fbbac6f50abbd7bdd0571e7bb3 100644 (file)
@@ -8,91 +8,44 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <config.h>
 #include <common.h>
-#include <malloc.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdt_support.h>
+#include <memalign.h>
+#include <miiphy.h>
 #include <net.h>
-#include <command.h>
 #include <asm/cache.h>
 #include <asm/dma-mapping.h>
-#include <miiphy.h>
+#include <asm/io.h>
 #include "altera_tse.h"
 
-/* sgdma debug - print descriptor */
-static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
-{
-       debug("SGDMA DEBUG :\n");
-       debug("desc->source : 0x%x \n", (unsigned int)desc->source);
-       debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
-       debug("desc->next : 0x%x \n", (unsigned int)desc->next);
-       debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
-       debug("desc->destination_pad : 0x%x \n",
-             (unsigned int)desc->destination_pad);
-       debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
-       debug("desc->bytes_to_transfer : 0x%x \n",
-             (unsigned int)desc->bytes_to_transfer);
-       debug("desc->actual_bytes_transferred : 0x%x \n",
-             (unsigned int)desc->actual_bytes_transferred);
-       debug("desc->descriptor_status : 0x%x \n",
-             (unsigned int)desc->descriptor_status);
-       debug("desc->descriptor_control : 0x%x \n",
-             (unsigned int)desc->descriptor_control);
-}
+DECLARE_GLOBAL_DATA_PTR;
 
-/* This is a generic routine that the SGDMA mode-specific routines
- * call to populate a descriptor.
- * arg1            :pointer to first SGDMA descriptor.
- * arg2            :pointer to next  SGDMA descriptor.
- * arg3            :Address to where data to be written.
- * arg4            :Address from where data to be read.
- * arg5            :no of byte to transaction.
- * arg6            :variable indicating to generate start of packet or not
- * arg7            :read fixed
- * arg8            :write fixed
- * arg9            :read burst
- * arg10    :write burst
- * arg11    :atlantic_channel number
- */
-static void alt_sgdma_construct_descriptor_burst(
-       volatile struct alt_sgdma_descriptor *desc,
-       volatile struct alt_sgdma_descriptor *next,
-       unsigned int *read_addr,
-       unsigned int *write_addr,
+static inline void alt_sgdma_construct_descriptor(
+       struct alt_sgdma_descriptor *desc,
+       struct alt_sgdma_descriptor *next,
+       void *read_addr,
+       void *write_addr,
        unsigned short length_or_eop,
        int generate_eop,
        int read_fixed,
-       int write_fixed_or_sop,
-       int read_burst,
-       int write_burst,
-       unsigned char atlantic_channel)
+       int write_fixed_or_sop)
 {
+       unsigned char val;
+
        /*
         * Mark the "next" descriptor as "not" owned by hardware. This prevents
-        * The SGDMA controller from continuing to process the chain. This is
-        * done as a single IO write to bypass cache, without flushing
-        * the entire descriptor, since only the 8-bit descriptor status must
-        * be flushed.
+        * The SGDMA controller from continuing to process the chain.
         */
-       if (!next)
-               debug("Next descriptor not defined!!\n");
-
-       next->descriptor_control = (next->descriptor_control &
-               ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK);
-
-       desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF);
-       desc->destination =
-           (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF);
-       desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF);
-       desc->source_pad = 0x0;
-       desc->destination_pad = 0x0;
-       desc->next_pad = 0x0;
-       desc->bytes_to_transfer = length_or_eop;
-       desc->actual_bytes_transferred = 0;
-       desc->descriptor_status = 0x0;
+       next->descriptor_control = next->descriptor_control &
+               ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK;
 
-       /* SGDMA burst not currently supported */
-       desc->read_burst = 0;
-       desc->write_burst = 0;
+       memset(desc, 0, sizeof(struct alt_sgdma_descriptor));
+       desc->source = virt_to_phys(read_addr);
+       desc->destination = virt_to_phys(write_addr);
+       desc->next = virt_to_phys(next);
+       desc->bytes_to_transfer = length_or_eop;
 
        /*
         * Set the descriptor control block as follows:
@@ -108,108 +61,49 @@ static void alt_sgdma_construct_descriptor_burst(
         * pointing at this descriptor, it will not run (via the "owned by
         * hardware" bit) until all other descriptor has been set up.
         */
-
-       desc->descriptor_control =
-           ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
-            (generate_eop ?
-             ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) |
-            (read_fixed ?
-             ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) |
-            (write_fixed_or_sop ?
-             ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) |
-            (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0)
-                   );
+       val = ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK;
+       if (generate_eop)
+               val |= ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK;
+       if (read_fixed)
+               val |= ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK;
+       if (write_fixed_or_sop)
+               val |= ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK;
+       desc->descriptor_control = val;
 }
 
-static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
-                              volatile struct alt_sgdma_descriptor *desc)
+static int alt_sgdma_wait_transfer(struct alt_sgdma_registers *regs)
 {
-       unsigned int status;
-       int counter = 0;
-
-       /* Wait for any pending transfers to complete */
-       alt_sgdma_print_desc(desc);
-       status = dev->status;
+       int status;
+       ulong ctime;
 
-       counter = 0;
-       while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
-               if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
+       /* Wait for the descriptor (chain) to complete */
+       ctime = get_timer(0);
+       while (1) {
+               status = readl(&regs->status);
+               if (!(status & ALT_SGDMA_STATUS_BUSY_MSK))
+                       break;
+               if (get_timer(ctime) > ALT_TSE_SGDMA_BUSY_TIMEOUT) {
+                       status = -ETIMEDOUT;
+                       debug("sgdma timeout\n");
                        break;
+               }
        }
 
-       if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
-               debug("Timeout waiting sgdma in do sync!\n");
-
-       /*
-        * Clear any (previous) status register information
-        * that might occlude our error checking later.
-        */
-       dev->status = 0xFF;
-
-       /* Point the controller at the descriptor */
-       dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
-       debug("next desc in sgdma 0x%x\n",
-             (unsigned int)dev->next_descriptor_pointer);
-
-       /*
-        * Set up SGDMA controller to:
-        * - Disable interrupt generation
-        * - Run once a valid descriptor is written to controller
-        * - Stop on an error with any particular descriptor
-        */
-       dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
-                       ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
-
-       /* Wait for the descriptor (chain) to complete */
-       status = dev->status;
-       debug("wait for sgdma....");
-       while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK)
-               ;
-       debug("done\n");
-
        /* Clear Run */
-       dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
-
-       /* Get & clear status register contents */
-       status = dev->status;
-       dev->status = 0xFF;
+       writel(0, &regs->control);
+       /* Clear status */
+       writel(0xff, &regs->status);
 
-       /* we really should check if the transfer completes properly */
-       debug("tx sgdma status = 0x%x", status);
-       return 0;
+       return status;
 }
 
-static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
-                               volatile struct alt_sgdma_descriptor *desc)
+static int alt_sgdma_start_transfer(struct alt_sgdma_registers *regs,
+                                   struct alt_sgdma_descriptor *desc)
 {
-       int counter = 0;
-
-       /* Wait for any pending transfers to complete */
-       alt_sgdma_print_desc(desc);
-
-       counter = 0;
-       while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
-               if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
-                       break;
-       }
-
-       if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
-               debug("Timeout waiting sgdma in do async!\n");
-
-       /*
-        * Clear the RUN bit in the control register. This is needed
-        * to restart the SGDMA engine later on.
-        */
-       dev->control = 0;
-
-       /*
-        * Clear any (previous) status register information
-        * that might occlude our error checking later.
-        */
-       dev->status = 0xFF;
+       unsigned int val;
 
        /* Point the controller at the descriptor */
-       dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
+       writel(virt_to_phys(desc), &regs->next_descriptor_pointer);
 
        /*
         * Set up SGDMA controller to:
@@ -217,26 +111,31 @@ static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
         * - Run once a valid descriptor is written to controller
         * - Stop on an error with any particular descriptor
         */
-       dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
-                       ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
+       val = ALT_SGDMA_CONTROL_RUN_MSK | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK;
+       writel(val, &regs->control);
 
-       /* we really should check if the transfer completes properly */
        return 0;
 }
 
-/* u-boot interface */
-static int tse_adjust_link(struct altera_tse_priv *priv)
+static void tse_adjust_link(struct altera_tse_priv *priv,
+                           struct phy_device *phydev)
 {
+       struct alt_tse_mac *mac_dev = priv->mac_dev;
        unsigned int refvar;
 
-       refvar = priv->mac_dev->command_config.image;
+       if (!phydev->link) {
+               debug("%s: No link.\n", phydev->dev->name);
+               return;
+       }
+
+       refvar = readl(&mac_dev->command_config);
 
-       if (!(priv->duplexity))
+       if (phydev->duplex)
                refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
        else
                refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK;
 
-       switch (priv->speed) {
+       switch (phydev->speed) {
        case 1000:
                refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
                refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
@@ -250,721 +149,383 @@ static int tse_adjust_link(struct altera_tse_priv *priv)
                refvar |= ALTERA_TSE_CMD_ENA_10_MSK;
                break;
        }
-       priv->mac_dev->command_config.image = refvar;
-
-       return 0;
+       writel(refvar, &mac_dev->command_config);
 }
 
-static int tse_eth_send(struct eth_device *dev, void *packet, int length)
+static int altera_tse_send(struct udevice *dev, void *packet, int length)
 {
-       struct altera_tse_priv *priv = dev->priv;
-       volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
-       volatile struct alt_sgdma_descriptor *tx_desc =
-           (volatile struct alt_sgdma_descriptor *)priv->tx_desc;
-
-       volatile struct alt_sgdma_descriptor *tx_desc_cur =
-           (volatile struct alt_sgdma_descriptor *)&tx_desc[0];
-
-       flush_dcache_range((unsigned long)packet,
-                       (unsigned long)packet + length);
-       alt_sgdma_construct_descriptor_burst(
-               (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
-               (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
-               (unsigned int *)packet, /* read addr */
-               (unsigned int *)0,
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
+       unsigned long tx_buf = (unsigned long)packet;
+
+       flush_dcache_range(tx_buf, tx_buf + length);
+       alt_sgdma_construct_descriptor(
+               tx_desc,
+               tx_desc + 1,
+               packet, /* read addr */
+               NULL,   /* write addr */
                length, /* length or EOP ,will change for each tx */
-               0x1,    /* gen eop */
-               0x0,    /* read fixed */
-               0x1,    /* write fixed or sop */
-               0x0,    /* read burst */
-               0x0,    /* write burst */
-               0x0     /* channel */
+               1,      /* gen eop */
+               0,      /* read fixed */
+               1       /* write fixed or sop */
                );
-       debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length);
 
        /* send the packet */
-       debug("sending packet\n");
-       alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
-       debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
-       return tx_desc_cur->actual_bytes_transferred;
+       alt_sgdma_start_transfer(priv->sgdma_tx, tx_desc);
+       alt_sgdma_wait_transfer(priv->sgdma_tx);
+       debug("sent %d bytes\n", tx_desc->actual_bytes_transferred);
+
+       return tx_desc->actual_bytes_transferred;
 }
 
-static int tse_eth_rx(struct eth_device *dev)
+static int altera_tse_recv(struct udevice *dev, int flags, uchar **packetp)
 {
-       int packet_length = 0;
-       struct altera_tse_priv *priv = dev->priv;
-       volatile struct alt_sgdma_descriptor *rx_desc =
-           (volatile struct alt_sgdma_descriptor *)priv->rx_desc;
-       volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
+       int packet_length;
 
-       if (rx_desc_cur->descriptor_status &
+       if (rx_desc->descriptor_status &
            ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
-               debug("got packet\n");
                packet_length = rx_desc->actual_bytes_transferred;
-               net_process_received_packet(net_rx_packets[0], packet_length);
-
-               /* start descriptor again */
-               flush_dcache_range((unsigned long)(net_rx_packets[0]),
-                                  (unsigned long)(net_rx_packets[0] +
-                                                  PKTSIZE_ALIGN));
-               alt_sgdma_construct_descriptor_burst(
-                       (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
-                       (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
-                       (unsigned int)0x0,      /* read addr */
-                       (unsigned int *)net_rx_packets[0],
-                       0x0,    /* length or EOP */
-                       0x0,    /* gen eop */
-                       0x0,    /* read fixed */
-                       0x0,    /* write fixed or sop */
-                       0x0,    /* read burst */
-                       0x0,    /* write burst */
-                       0x0     /* channel */
-                   );
-
-               /* setup the sgdma */
-               alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
+               debug("recv %d bytes\n", packet_length);
+               *packetp = priv->rx_buf;
 
                return packet_length;
        }
 
-       return -1;
+       return -EAGAIN;
 }
 
-static void tse_eth_halt(struct eth_device *dev)
+static int altera_tse_free_pkt(struct udevice *dev, uchar *packet,
+                              int length)
 {
-       /* don't do anything! */
-       /* this gets called after each uboot  */
-       /* network command.  don't need to reset the thing all of the time */
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
+       unsigned long rx_buf = (unsigned long)priv->rx_buf;
+
+       alt_sgdma_wait_transfer(priv->sgdma_rx);
+       invalidate_dcache_range(rx_buf, rx_buf + PKTSIZE_ALIGN);
+       alt_sgdma_construct_descriptor(
+               rx_desc,
+               rx_desc + 1,
+               NULL,   /* read addr */
+               priv->rx_buf, /* write addr */
+               0,      /* length or EOP */
+               0,      /* gen eop */
+               0,      /* read fixed */
+               0       /* write fixed or sop */
+               );
+
+       /* setup the sgdma */
+       alt_sgdma_start_transfer(priv->sgdma_rx, rx_desc);
+       debug("recv setup\n");
+
+       return 0;
 }
 
-static void tse_eth_reset(struct eth_device *dev)
+static void altera_tse_stop(struct udevice *dev)
 {
-       /* stop sgdmas, disable tse receive */
-       struct altera_tse_priv *priv = dev->priv;
-       volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
-       volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
-       volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
-       int counter;
-       volatile struct alt_sgdma_descriptor *rx_desc =
-           (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0];
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       struct alt_tse_mac *mac_dev = priv->mac_dev;
+       struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
+       struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
+       struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
+       unsigned int status;
+       int ret;
+       ulong ctime;
 
        /* clear rx desc & wait for sgdma to complete */
        rx_desc->descriptor_control = 0;
-       rx_sgdma->control = 0;
-       counter = 0;
-       while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
-               if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
-                       break;
-       }
-
-       if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
-               debug("Timeout waiting for rx sgdma!\n");
-               rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
-               rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
-       }
-
-       counter = 0;
-       tx_sgdma->control = 0;
-       while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
-               if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
-                       break;
-       }
+       writel(0, &rx_sgdma->control);
+       ret = alt_sgdma_wait_transfer(rx_sgdma);
+       if (ret == -ETIMEDOUT)
+               writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK,
+                      &rx_sgdma->control);
+
+       writel(0, &tx_sgdma->control);
+       ret = alt_sgdma_wait_transfer(tx_sgdma);
+       if (ret == -ETIMEDOUT)
+               writel(ALT_SGDMA_CONTROL_SOFTWARERESET_MSK,
+                      &tx_sgdma->control);
 
-       if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
-               debug("Timeout waiting for tx sgdma!\n");
-               tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
-               tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
-       }
        /* reset the mac */
-       mac_dev->command_config.bits.transmit_enable = 1;
-       mac_dev->command_config.bits.receive_enable = 1;
-       mac_dev->command_config.bits.software_reset = 1;
-
-       counter = 0;
-       while (mac_dev->command_config.bits.software_reset) {
-               if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR)
+       writel(ALTERA_TSE_CMD_SW_RESET_MSK, &mac_dev->command_config);
+       ctime = get_timer(0);
+       while (1) {
+               status = readl(&mac_dev->command_config);
+               if (!(status & ALTERA_TSE_CMD_SW_RESET_MSK))
                        break;
+               if (get_timer(ctime) > ALT_TSE_SW_RESET_TIMEOUT) {
+                       debug("Reset mac timeout\n");
+                       break;
+               }
        }
-
-       if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR)
-               debug("TSEMAC SW reset bit never cleared!\n");
 }
 
-static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
+static int tse_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
 {
-       volatile struct alt_tse_mac *mac_dev;
-       unsigned int *mdio_regs;
-       unsigned int data;
-       u16 value;
-
-       mac_dev = priv->mac_dev;
+       struct altera_tse_priv *priv = bus->priv;
+       struct alt_tse_mac *mac_dev = priv->mac_dev;
+       unsigned int value;
 
        /* set mdio address */
-       mac_dev->mdio_phy1_addr = priv->phyaddr;
-       mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
-
+       writel(addr, &mac_dev->mdio_phy1_addr);
        /* get the data */
-       data = mdio_regs[regnum];
+       value = readl(&mac_dev->mdio_phy1[reg]);
 
-       value = data & 0xffff;
-
-       return value;
+       return value & 0xffff;
 }
 
-static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
-                  unsigned int value)
+static int tse_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
+                         u16 val)
 {
-       volatile struct alt_tse_mac *mac_dev;
-       unsigned int *mdio_regs;
-       unsigned int data;
-
-       mac_dev = priv->mac_dev;
+       struct altera_tse_priv *priv = bus->priv;
+       struct alt_tse_mac *mac_dev = priv->mac_dev;
 
        /* set mdio address */
-       mac_dev->mdio_phy1_addr = priv->phyaddr;
-       mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
-
-       /* get the data */
-       data = (unsigned int)value;
-
-       mdio_regs[regnum] = data;
-
-       return 0;
-}
-
-/* MDIO access to phy */
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
-static int altera_tse_miiphy_write(const char *devname, unsigned char addr,
-                                  unsigned char reg, unsigned short value)
-{
-       struct eth_device *dev;
-       struct altera_tse_priv *priv;
-       dev = eth_get_dev_by_name(devname);
-       priv = dev->priv;
-
-       tse_mdio_write(priv, (uint) reg, (uint) value);
-
-       return 0;
-}
-
-static int altera_tse_miiphy_read(const char *devname, unsigned char addr,
-                                 unsigned char reg, unsigned short *value)
-{
-       struct eth_device *dev;
-       struct altera_tse_priv *priv;
-       volatile struct alt_tse_mac *mac_dev;
-       unsigned int *mdio_regs;
-
-       dev = eth_get_dev_by_name(devname);
-       priv = dev->priv;
-
-       mac_dev = priv->mac_dev;
-       mac_dev->mdio_phy1_addr = (int)addr;
-       mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
-
-       *value = 0xffff & mdio_regs[reg];
-
-       return 0;
-
-}
-#endif
-
-/*
- * Also copied from tsec.c
- */
-/* Parse the status register for link, and then do
- * auto-negotiation
- */
-static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
-{
-       /*
-        * Wait if the link is up, and autonegotiation is in progress
-        * (ie - we're capable and it's not done)
-        */
-       mii_reg = tse_mdio_read(priv, MIIM_STATUS);
-
-       if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE)
-           && !(mii_reg & BMSR_ANEGCOMPLETE)) {
-               int i = 0;
-
-               puts("Waiting for PHY auto negotiation to complete");
-               while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
-                       /*
-                        * Timeout reached ?
-                        */
-                       if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-                               puts(" TIMEOUT !\n");
-                               priv->link = 0;
-                               return 0;
-                       }
-
-                       if ((i++ % 1000) == 0)
-                               putc('.');
-                       udelay(1000);   /* 1 ms */
-                       mii_reg = tse_mdio_read(priv, MIIM_STATUS);
-               }
-               puts(" done\n");
-               priv->link = 1;
-               udelay(500000); /* another 500 ms (results in faster booting) */
-       } else {
-               if (mii_reg & MIIM_STATUS_LINK) {
-                       debug("Link is up\n");
-                       priv->link = 1;
-               } else {
-                       debug("Link is down\n");
-                       priv->link = 0;
-               }
-       }
+       writel(addr, &mac_dev->mdio_phy1_addr);
+       /* set the data */
+       writel(val, &mac_dev->mdio_phy1[reg]);
 
        return 0;
 }
 
-/* Parse the 88E1011's status register for speed and duplex
- * information
- */
-static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
+static int tse_mdio_init(const char *name, struct altera_tse_priv *priv)
 {
-       uint speed;
-
-       mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
-
-       if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
-           !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
-               int i = 0;
-
-               puts("Waiting for PHY realtime link");
-               while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
-                       /* Timeout reached ? */
-                       if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-                               puts(" TIMEOUT !\n");
-                               priv->link = 0;
-                               break;
-                       }
-
-                       if ((i++ == 1000) == 0) {
-                               i = 0;
-                               puts(".");
-                       }
-                       udelay(1000);   /* 1 ms */
-                       mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
-               }
-               puts(" done\n");
-               udelay(500000); /* another 500 ms (results in faster booting) */
-       } else {
-               if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
-                       priv->link = 1;
-               else
-                       priv->link = 0;
-       }
-
-       if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
-               priv->duplexity = 1;
-       else
-               priv->duplexity = 0;
-
-       speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
+       struct mii_dev *bus = mdio_alloc();
 
-       switch (speed) {
-       case MIIM_88E1011_PHYSTAT_GBIT:
-               priv->speed = 1000;
-               debug("PHY Speed is 1000Mbit\n");
-               break;
-       case MIIM_88E1011_PHYSTAT_100:
-               debug("PHY Speed is 100Mbit\n");
-               priv->speed = 100;
-               break;
-       default:
-               debug("PHY Speed is 10Mbit\n");
-               priv->speed = 10;
+       if (!bus) {
+               printf("Failed to allocate MDIO bus\n");
+               return -ENOMEM;
        }
 
-       return 0;
-}
-
-static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
-{
-       uint mii_data = tse_mdio_read(priv, mii_reg);
-       mii_data &= 0xfff0;
-       if ((priv->flags >= 1) && (priv->flags <= 4))
-               mii_data |= 0xb;
-       else if (priv->flags == 5)
-               mii_data |= 0x4;
-
-       return mii_data;
-}
+       bus->read = tse_mdio_read;
+       bus->write = tse_mdio_write;
+       snprintf(bus->name, sizeof(bus->name), name);
 
-static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
-{
-       uint mii_data = tse_mdio_read(priv, mii_reg);
-       mii_data &= ~0x82;
-       if ((priv->flags >= 1) && (priv->flags <= 4))
-               mii_data |= 0x82;
+       bus->priv = (void *)priv;
 
-       return mii_data;
+       return mdio_register(bus);
 }
 
-/*
- * Returns which value to write to the control register.
- * For 10/100, the value is slightly different
- */
-static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
-{
-       return MIIM_CONTROL_INIT;
-}
-
-/*
- * PHY & MDIO code
- * Need to add SGMII stuff
- *
- */
-
-static struct phy_info phy_info_M88E1111S = {
-       0x01410cc,
-       "Marvell 88E1111S",
-       4,
-       (struct phy_cmd[]){     /* config */
-                          /* Reset and configure the PHY */
-                          {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-                          {MIIM_88E1111_PHY_EXT_SR, 0x848f,
-                           &mii_m88e1111s_setmode_sr},
-                          /* Delay RGMII TX and RX */
-                          {MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
-                           &mii_m88e1111s_setmode_cr},
-                          {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
-                          {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
-                          {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-                          {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-                          {miim_end,}
-                          },
-       (struct phy_cmd[]){     /* startup */
-                          /* Status is read once to clear old link state */
-                          {MIIM_STATUS, miim_read, NULL},
-                          /* Auto-negotiate */
-                          {MIIM_STATUS, miim_read, &mii_parse_sr},
-                          /* Read the status */
-                          {MIIM_88E1011_PHY_STATUS, miim_read,
-                           &mii_parse_88E1011_psr},
-                          {miim_end,}
-                          },
-       (struct phy_cmd[]){     /* shutdown */
-                          {miim_end,}
-                          },
-};
-
-/* a generic flavor.  */
-static struct phy_info phy_info_generic = {
-       0,
-       "Unknown/Generic PHY",
-       32,
-       (struct phy_cmd[]){     /* config */
-                          {MII_BMCR, BMCR_RESET, NULL},
-                          {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL},
-                          {miim_end,}
-                          },
-       (struct phy_cmd[]){     /* startup */
-                          {MII_BMSR, miim_read, NULL},
-                          {MII_BMSR, miim_read, &mii_parse_sr},
-                          {miim_end,}
-                          },
-       (struct phy_cmd[]){     /* shutdown */
-                          {miim_end,}
-                          }
-};
-
-static struct phy_info *phy_info[] = {
-       &phy_info_M88E1111S,
-       NULL
-};
-
- /* Grab the identifier of the device's PHY, and search through
-  * all of the known PHYs to see if one matches.        If so, return
-  * it, if not, return NULL
-  */
-static struct phy_info *get_phy_info(struct eth_device *dev)
+static int tse_phy_init(struct altera_tse_priv *priv, void *dev)
 {
-       struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
-       uint phy_reg, phy_ID;
-       int i;
-       struct phy_info *theInfo = NULL;
-
-       /* Grab the bits from PHYIR1, and put them in the upper half */
-       phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
-       phy_ID = (phy_reg & 0xffff) << 16;
-
-       /* Grab the bits from PHYIR2, and put them in the lower half */
-       phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
-       phy_ID |= (phy_reg & 0xffff);
-
-       /* loop through all the known PHY types, and find one that */
-       /* matches the ID we read from the PHY. */
-       for (i = 0; phy_info[i]; i++) {
-               if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
-                       theInfo = phy_info[i];
-                       break;
-               }
-       }
-
-       if (theInfo == NULL) {
-               theInfo = &phy_info_generic;
-               debug("%s: No support for PHY id %x; assuming generic\n",
-                     dev->name, phy_ID);
-       } else
-               debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
+       struct phy_device *phydev;
+       unsigned int mask = 0xffffffff;
 
-       return theInfo;
-}
-
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary
- */
-static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
-{
-       int i;
-       uint result;
+       if (priv->phyaddr)
+               mask = 1 << priv->phyaddr;
 
-       for (i = 0; cmd->mii_reg != miim_end; i++) {
-               if (cmd->mii_data == miim_read) {
-                       result = tse_mdio_read(priv, cmd->mii_reg);
+       phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+       if (!phydev)
+               return -ENODEV;
 
-                       if (cmd->funct != NULL)
-                               (*(cmd->funct)) (result, priv);
+       phy_connect_dev(phydev, dev);
 
-               } else {
-                       if (cmd->funct != NULL)
-                               result = (*(cmd->funct)) (cmd->mii_reg, priv);
-                       else
-                               result = cmd->mii_data;
+       phydev->supported &= PHY_GBIT_FEATURES;
+       phydev->advertising = phydev->supported;
 
-                       tse_mdio_write(priv, cmd->mii_reg, result);
+       priv->phydev = phydev;
+       phy_config(phydev);
 
-               }
-               cmd++;
-       }
+       return 0;
 }
 
-/* Phy init code */
-static int init_phy(struct eth_device *dev)
+static int altera_tse_write_hwaddr(struct udevice *dev)
 {
-       struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
-       struct phy_info *curphy;
-
-       /* Get the cmd structure corresponding to the attached
-        * PHY */
-       curphy = get_phy_info(dev);
-
-       if (curphy == NULL) {
-               priv->phyinfo = NULL;
-               debug("%s: No PHY found\n", dev->name);
-
-               return 0;
-       } else
-               debug("%s found\n", curphy->name);
-       priv->phyinfo = curphy;
-
-       phy_run_commands(priv, priv->phyinfo->config);
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       struct alt_tse_mac *mac_dev = priv->mac_dev;
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       u8 *hwaddr = pdata->enetaddr;
+       unsigned int mac_lo, mac_hi;
+
+       mac_lo = (hwaddr[3] << 24) | (hwaddr[2] << 16) |
+               (hwaddr[1] << 8) | hwaddr[0];
+       mac_hi = (hwaddr[5] << 8) | hwaddr[4];
+       debug("Set MAC address to 0x%04x%08x\n", mac_hi, mac_lo);
+
+       writel(mac_lo, &mac_dev->mac_addr_0);
+       writel(mac_hi, &mac_dev->mac_addr_1);
+       writel(mac_lo, &mac_dev->supp_mac_addr_0_0);
+       writel(mac_hi, &mac_dev->supp_mac_addr_0_1);
+       writel(mac_lo, &mac_dev->supp_mac_addr_1_0);
+       writel(mac_hi, &mac_dev->supp_mac_addr_1_1);
+       writel(mac_lo, &mac_dev->supp_mac_addr_2_0);
+       writel(mac_hi, &mac_dev->supp_mac_addr_2_1);
+       writel(mac_lo, &mac_dev->supp_mac_addr_3_0);
+       writel(mac_hi, &mac_dev->supp_mac_addr_3_1);
 
-       return 1;
-}
-
-static int tse_set_mac_address(struct eth_device *dev)
-{
-       struct altera_tse_priv *priv = dev->priv;
-       volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
-
-       debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n",
-             dev->enetaddr[5], dev->enetaddr[4],
-             dev->enetaddr[3], dev->enetaddr[2],
-             dev->enetaddr[1], dev->enetaddr[0]);
-       mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 |
-                              (dev->enetaddr[2]) << 16 |
-                              (dev->enetaddr[1]) << 8 | (dev->enetaddr[0]));
-
-       mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 |
-                               (dev->enetaddr[4])) & 0xFFFF);
-
-       /* Set the MAC address */
-       mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
-       mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1;
-
-       /* Set the MAC address */
-       mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0;
-       mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1;
-
-       /* Set the MAC address */
-       mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0;
-       mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1;
-
-       /* Set the MAC address */
-       mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
-       mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
        return 0;
 }
 
-static int tse_eth_init(struct eth_device *dev, bd_t * bd)
+static int altera_tse_start(struct udevice *dev)
 {
-       int dat;
-       struct altera_tse_priv *priv = dev->priv;
-       volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
-       volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
-       volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
-       volatile struct alt_sgdma_descriptor *rx_desc_cur =
-           (volatile struct alt_sgdma_descriptor *)&rx_desc[0];
-
-       /* stop controller */
-       debug("Reseting TSE & SGDMAs\n");
-       tse_eth_reset(dev);
-
-       /* start the phy */
-       debug("Configuring PHY\n");
-       phy_run_commands(priv, priv->phyinfo->startup);
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       struct alt_tse_mac *mac_dev = priv->mac_dev;
+       unsigned int val;
+       int ret;
 
        /* need to create sgdma */
-       debug("Configuring tx desc\n");
-       alt_sgdma_construct_descriptor_burst(
-               (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
-               (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
-               (unsigned int *)NULL,   /* read addr */
-               (unsigned int *)0,
-               0,      /* length or EOP ,will change for each tx */
-               0x1,    /* gen eop */
-               0x0,    /* read fixed */
-               0x1,    /* write fixed or sop */
-               0x0,    /* read burst */
-               0x0,    /* write burst */
-               0x0     /* channel */
-               );
        debug("Configuring rx desc\n");
-       flush_dcache_range((unsigned long)(net_rx_packets[0]),
-                          (unsigned long)(net_rx_packets[0]) + PKTSIZE_ALIGN);
-       alt_sgdma_construct_descriptor_burst(
-               (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
-               (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
-               (unsigned int)0x0,      /* read addr */
-               (unsigned int *)net_rx_packets[0],
-               0x0,    /* length or EOP */
-               0x0,    /* gen eop */
-               0x0,    /* read fixed */
-               0x0,    /* write fixed or sop */
-               0x0,    /* read burst */
-               0x0,    /* write burst */
-               0x0     /* channel */
-               );
-       /* start rx async transfer */
-       debug("Starting rx sgdma\n");
-       alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
-
+       altera_tse_free_pkt(dev, priv->rx_buf, PKTSIZE_ALIGN);
        /* start TSE */
        debug("Configuring TSE Mac\n");
        /* Initialize MAC registers */
-       mac_dev->max_frame_length = PKTSIZE_ALIGN;
-       mac_dev->rx_almost_empty_threshold = 8;
-       mac_dev->rx_almost_full_threshold = 8;
-       mac_dev->tx_almost_empty_threshold = 8;
-       mac_dev->tx_almost_full_threshold = 3;
-       mac_dev->tx_sel_empty_threshold =
-           CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
-       mac_dev->tx_sel_full_threshold = 0;
-       mac_dev->rx_sel_empty_threshold =
-           CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
-       mac_dev->rx_sel_full_threshold = 0;
+       writel(PKTSIZE_ALIGN, &mac_dev->max_frame_length);
+       writel(priv->rx_fifo_depth - 16, &mac_dev->rx_sel_empty_threshold);
+       writel(0, &mac_dev->rx_sel_full_threshold);
+       writel(priv->tx_fifo_depth - 16, &mac_dev->tx_sel_empty_threshold);
+       writel(0, &mac_dev->tx_sel_full_threshold);
+       writel(8, &mac_dev->rx_almost_empty_threshold);
+       writel(8, &mac_dev->rx_almost_full_threshold);
+       writel(8, &mac_dev->tx_almost_empty_threshold);
+       writel(3, &mac_dev->tx_almost_full_threshold);
 
        /* NO Shift */
-       mac_dev->rx_cmd_stat.bits.rx_shift16 = 0;
-       mac_dev->tx_cmd_stat.bits.tx_shift16 = 0;
+       writel(0, &mac_dev->rx_cmd_stat);
+       writel(0, &mac_dev->tx_cmd_stat);
 
        /* enable MAC */
-       dat = 0;
-       dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
+       val = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
+       writel(val, &mac_dev->command_config);
+
+       /* Start up the PHY */
+       ret = phy_startup(priv->phydev);
+       if (ret) {
+               debug("Could not initialize PHY %s\n",
+                     priv->phydev->dev->name);
+               return ret;
+       }
 
-       mac_dev->command_config.image = dat;
+       tse_adjust_link(priv, priv->phydev);
 
-       /* configure the TSE core  */
-       /*  -- output clocks,  */
-       /*  -- and later config stuff for SGMII */
-       if (priv->link) {
-               debug("Adjusting TSE to link speed\n");
-               tse_adjust_link(priv);
-       }
+       if (!priv->phydev->link)
+               return -EIO;
 
-       return priv->link ? 0 : -1;
+       return 0;
 }
 
-/* TSE init code */
-int altera_tse_initialize(u8 dev_num, int mac_base,
-                         int sgdma_rx_base, int sgdma_tx_base,
-                         u32 sgdma_desc_base, u32 sgdma_desc_size)
+static int altera_tse_probe(struct udevice *dev)
 {
-       struct altera_tse_priv *priv;
-       struct eth_device *dev;
-       struct alt_sgdma_descriptor *rx_desc;
-       struct alt_sgdma_descriptor *tx_desc;
-       unsigned long dma_handle;
-
-       dev = (struct eth_device *)malloc(sizeof *dev);
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       struct altera_tse_priv *priv = dev_get_priv(dev);
+       const void *blob = gd->fdt_blob;
+       int node = dev->of_offset;
+       const char *list, *end;
+       const fdt32_t *cell;
+       void *base, *desc_mem = NULL;
+       unsigned long addr, size;
+       int len, idx;
+       int ret;
 
-       if (NULL == dev)
-               return 0;
+       /*
+        * decode regs, assume address-cells and size-cells are both one.
+        * there are multiple reg tuples, and they need to match with
+        * reg-names.
+        */
+       list = fdt_getprop(blob, node, "reg-names", &len);
+       if (!list)
+               return -ENOENT;
+       end = list + len;
+       cell = fdt_getprop(blob, node, "reg", &len);
+       if (!cell)
+               return -ENOENT;
+       idx = 0;
+       while (list < end) {
+               addr = fdt_translate_address((void *)blob,
+                                            node, cell + idx);
+               size = fdt_addr_to_cpu(cell[idx + 1]);
+               base = ioremap(addr, size);
+               len = strlen(list);
+               if (strcmp(list, "control_port") == 0)
+                       priv->mac_dev = base;
+               else if (strcmp(list, "rx_csr") == 0)
+                       priv->sgdma_rx = base;
+               else if (strcmp(list, "tx_csr") == 0)
+                       priv->sgdma_tx = base;
+               else if (strcmp(list, "s1") == 0)
+                       desc_mem = base;
+               idx += 2;
+               list += (len + 1);
+       }
+       /* decode fifo depth */
+       priv->rx_fifo_depth = fdtdec_get_int(blob, node,
+               "rx-fifo-depth", 0);
+       priv->tx_fifo_depth = fdtdec_get_int(blob, node,
+               "tx-fifo-depth", 0);
+       /* decode phy */
+       addr = fdtdec_get_int(blob, node,
+                             "phy-handle", 0);
+       addr = fdt_node_offset_by_phandle(blob, addr);
+       priv->phyaddr = fdtdec_get_int(blob, addr,
+               "reg", 0);
+       /* init desc */
+       len = sizeof(struct alt_sgdma_descriptor) * 4;
+       if (!desc_mem) {
+               desc_mem = dma_alloc_coherent(len, &addr);
+               if (!desc_mem)
+                       return -ENOMEM;
+       }
+       memset(desc_mem, 0, len);
+       priv->tx_desc = desc_mem;
+       priv->rx_desc = priv->tx_desc + 2;
+       /* allocate recv packet buffer */
+       priv->rx_buf = malloc_cache_aligned(PKTSIZE_ALIGN);
+       if (!priv->rx_buf)
+               return -ENOMEM;
 
-       memset(dev, 0, sizeof *dev);
+       /* stop controller */
+       debug("Reset TSE & SGDMAs\n");
+       altera_tse_stop(dev);
 
-       priv = malloc(sizeof(*priv));
+       /* start the phy */
+       priv->interface = pdata->phy_interface;
+       tse_mdio_init(dev->name, priv);
+       priv->bus = miiphy_get_dev_by_name(dev->name);
 
-       if (!priv) {
-               free(dev);
-               return 0;
-       }
-       if (sgdma_desc_size) {
-               if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) {
-                       printf("ALTERA_TSE-%hu: "
-                              "descriptor memory is too small\n", dev_num);
-                       free(priv);
-                       free(dev);
-                       return 0;
-               }
-               tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base;
-       } else {
-               tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
-                                            &dma_handle);
-       }
+       ret = tse_phy_init(priv, dev);
 
-       rx_desc = tx_desc + 2;
-       debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
-       debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
+       return ret;
+}
 
-       if (!tx_desc) {
-               free(priv);
-               free(dev);
-               return 0;
+static int altera_tse_ofdata_to_platdata(struct udevice *dev)
+{
+       struct eth_pdata *pdata = dev_get_platdata(dev);
+       const char *phy_mode;
+
+       pdata->phy_interface = -1;
+       phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+       if (phy_mode)
+               pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+       if (pdata->phy_interface == -1) {
+               debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+               return -EINVAL;
        }
-       memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
-       memset(tx_desc, 0, (sizeof *tx_desc) * 2);
-
-       /* initialize tse priv */
-       priv->mac_dev = (volatile struct alt_tse_mac *)mac_base;
-       priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base;
-       priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base;
-       priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR;
-       priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS;
-       priv->rx_desc = rx_desc;
-       priv->tx_desc = tx_desc;
-
-       /* init eth structure */
-       dev->priv = priv;
-       dev->init = tse_eth_init;
-       dev->halt = tse_eth_halt;
-       dev->send = tse_eth_send;
-       dev->recv = tse_eth_rx;
-       dev->write_hwaddr = tse_set_mac_address;
-       sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num);
-
-       eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
-       miiphy_register(dev->name, altera_tse_miiphy_read,
-                       altera_tse_miiphy_write);
-#endif
-
-       init_phy(dev);
-
-       return 1;
+
+       return 0;
 }
+
+static const struct eth_ops altera_tse_ops = {
+       .start          = altera_tse_start,
+       .send           = altera_tse_send,
+       .recv           = altera_tse_recv,
+       .free_pkt       = altera_tse_free_pkt,
+       .stop           = altera_tse_stop,
+       .write_hwaddr   = altera_tse_write_hwaddr,
+};
+
+static const struct udevice_id altera_tse_ids[] = {
+       { .compatible = "altr,tse-1.0", },
+       { }
+};
+
+U_BOOT_DRIVER(altera_tse) = {
+       .name   = "altera_tse",
+       .id     = UCLASS_ETH,
+       .of_match = altera_tse_ids,
+       .ops    = &altera_tse_ops,
+       .ofdata_to_platdata = altera_tse_ofdata_to_platdata,
+       .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+       .priv_auto_alloc_size = sizeof(struct altera_tse_priv),
+       .probe  = altera_tse_probe,
+};
index 8880bfc0f8bdf24ca070a1eb2ff78a9f70d3f15b..08c4f660a0d3da882878ff3b4edd453ddc2710c5 100644 (file)
 
 #define __packed_1_    __attribute__ ((packed, aligned(1)))
 
-/* PHY Stuff */
-#define miim_end -2
-#define miim_read -1
-
-#define PHY_AUTONEGOTIATE_TIMEOUT      5000    /* in ms */
-
-#ifndef CONFIG_SYS_TBIPA_VALUE
-#define CONFIG_SYS_TBIPA_VALUE 0x1f
-#endif
-#define MIIMCFG_INIT_VALUE     0x00000003
-#define MIIMCFG_RESET          0x80000000
-
-#define MIIMIND_BUSY           0x00000001
-#define MIIMIND_NOTVALID       0x00000004
-
-#define MIIM_CONTROL           0x00
-#define MIIM_CONTROL_RESET     0x00009140
-#define MIIM_CONTROL_INIT      0x00001140
-#define MIIM_CONTROL_RESTART   0x00001340
-#define MIIM_ANEN              0x00001000
-
-#define MIIM_CR                0x00
-#define MIIM_CR_RST            0x00008000
-#define MIIM_CR_INIT           0x00001000
-
-#define MIIM_STATUS            0x1
-#define MIIM_STATUS_AN_DONE    0x00000020
-#define MIIM_STATUS_LINK       0x0004
-
-#define MIIM_PHYIR1            0x2
-#define MIIM_PHYIR2            0x3
-
-#define MIIM_ANAR              0x4
-#define MIIM_ANAR_INIT         0x1e1
-
-#define MIIM_TBI_ANLPBPA       0x5
-#define MIIM_TBI_ANLPBPA_HALF  0x00000040
-#define MIIM_TBI_ANLPBPA_FULL  0x00000020
-
-#define MIIM_TBI_ANEX          0x6
-#define MIIM_TBI_ANEX_NP       0x00000004
-#define MIIM_TBI_ANEX_PRX      0x00000002
-
-#define MIIM_GBIT_CONTROL      0x9
-#define MIIM_GBIT_CONTROL_INIT 0xe00
-
-#define MIIM_EXT_PAGE_ACCESS   0x1f
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS        0x11
-#define MIIM_88E1011_PHYSTAT_SPEED     0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT      0x8000
-#define MIIM_88E1011_PHYSTAT_100       0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX    0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE   0x0800
-#define MIIM_88E1011_PHYSTAT_LINK      0x0400
-
-#define MIIM_88E1011_PHY_SCR           0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO    0x0060
-
-#define MIIM_88E1111_PHY_EXT_CR        0x14
-#define MIIM_88E1111_PHY_EXT_SR        0x1b
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL   24
-#define MIIM_88E1111_PHY_LED_DIRECT    0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE   0x411C
-
-#define MIIM_READ_COMMAND      0x00000001
-
-/* struct phy_info: a structure which defines attributes for a PHY
- * id will contain a number which represents the PHY.  During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is.  The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
-       uint id;
-       char *name;
-       uint shift;
-       /* Called to configure the PHY, and modify the controller
-        * based on the results */
-       struct phy_cmd *config;
-
-       /* Called when starting up the controller */
-       struct phy_cmd *startup;
-
-       /* Called when bringing down the controller */
-       struct phy_cmd *shutdown;
-};
-
 /* SGDMA Stuff */
 #define ALT_SGDMA_STATUS_ERROR_MSK                     (0x00000001)
 #define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK           (0x00000002)
@@ -116,18 +20,9 @@ struct phy_info {
 #define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK           (0x00000008)
 #define ALT_SGDMA_STATUS_BUSY_MSK                      (0x00000010)
 
-#define ALT_SGDMA_CONTROL_IE_ERROR_MSK                 (0x00000001)
-#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK       (0x00000002)
-#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK        (0x00000004)
-#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK       (0x00000008)
-#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK                (0x00000010)
 #define ALT_SGDMA_CONTROL_RUN_MSK                      (0x00000020)
 #define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK              (0x00000040)
-#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK    (0x00000080)
-#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK       (0x0000FF00)
 #define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK            (0x00010000)
-#define ALT_SGDMA_CONTROL_PARK_MSK                     (0x00020000)
-#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK          (0x80000000)
 
 #define ALTERA_TSE_SGDMA_INTR_MASK  (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
                        | ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
@@ -176,13 +71,13 @@ struct phy_info {
  *
  */
 struct alt_sgdma_descriptor {
-       unsigned int *source;   /* the address of data to be read. */
+       unsigned int source;    /* the address of data to be read. */
        unsigned int source_pad;
 
-       unsigned int *destination;      /* the address to write data */
+       unsigned int destination;       /* the address to write data */
        unsigned int destination_pad;
 
-       unsigned int *next;     /* the next descriptor in the list. */
+       unsigned int next;      /* the next descriptor in the list. */
        unsigned int next_pad;
 
        unsigned short bytes_to_transfer; /* the number of bytes to transfer */
@@ -241,112 +136,15 @@ struct alt_sgdma_registers {
 
 #define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16      (0x02000000)
 
-#define ALT_TSE_SW_RESET_WATCHDOG_CNTR         10000
-#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR       90000000
-
-/* Command_Config Register Bit Definitions */
-
-typedef volatile union __alt_tse_command_config {
-       unsigned int image;
-       struct {
-               unsigned int
-                transmit_enable:1,             /* bit 0 */
-                receive_enable:1,              /* bit 1 */
-                pause_frame_xon_gen:1, /* bit 2 */
-                ethernet_speed:1,              /* bit 3 */
-                promiscuous_enable:1,          /* bit 4 */
-                pad_enable:1,                  /* bit 5 */
-                crc_forward:1,         /* bit 6 */
-                pause_frame_forward:1, /* bit 7 */
-                pause_frame_ignore:1,          /* bit 8 */
-                set_mac_address_on_tx:1,       /* bit 9 */
-                halfduplex_enable:1,           /* bit 10 */
-                excessive_collision:1, /* bit 11 */
-                late_collision:1,              /* bit 12 */
-                software_reset:1,              /* bit 13 */
-                multicast_hash_mode_sel:1,     /* bit 14 */
-                loopback_enable:1,             /* bit 15 */
-                src_mac_addr_sel_on_tx:3,      /* bit 18:16 */
-                magic_packet_detect:1, /* bit 19 */
-                sleep_mode_enable:1,           /* bit 20 */
-                wake_up_request:1,             /* bit 21 */
-                pause_frame_xoff_gen:1,        /* bit 22 */
-                control_frame_enable:1,        /* bit 23 */
-                payload_len_chk_disable:1,     /* bit 24 */
-                enable_10mbps_intf:1,          /* bit 25 */
-                rx_error_discard_enable:1,     /* bit 26 */
-                reserved_bits:4,               /* bit 30:27 */
-                self_clear_counter_reset:1;    /* bit 31 */
-       } __packed_1_ bits;
-} __packed_1_ alt_tse_command_config;
-
-/* Tx_Cmd_Stat Register Bit Definitions */
-
-typedef volatile union __alt_tse_tx_cmd_stat {
-       unsigned int image;
-       struct {
-               unsigned int reserved_lsbs:17,  /* bit 16:0  */
-                omit_crc:1,                    /* bit 17 */
-                tx_shift16:1,                  /* bit 18 */
-                reserved_msbs:13;              /* bit 31:19 */
-
-       } __packed_1_ bits;
-} alt_tse_tx_cmd_stat;
-
-/* Rx_Cmd_Stat Register Bit Definitions */
-
-typedef volatile union __alt_tse_rx_cmd_stat {
-       unsigned int image;
-       struct {
-               unsigned int reserved_lsbs:25,  /* bit 24:0  */
-                rx_shift16:1,                  /* bit 25 */
-                reserved_msbs:6;               /* bit 31:26 */
-
-       } __packed_1_ bits;
-} alt_tse_rx_cmd_stat;
-
-struct alt_tse_mdio {
-       unsigned int control;   /*PHY device operation control register */
-       unsigned int status;    /*PHY device operation status register */
-       unsigned int phy_id1;   /*Bits 31:16 of PHY identifier. */
-       unsigned int phy_id2;   /*Bits 15:0 of PHY identifier. */
-       unsigned int auto_negotiation_advertisement;
-       unsigned int remote_partner_base_page_ability;
-
-       unsigned int reg6;
-       unsigned int reg7;
-       unsigned int reg8;
-       unsigned int reg9;
-       unsigned int rega;
-       unsigned int regb;
-       unsigned int regc;
-       unsigned int regd;
-       unsigned int rege;
-       unsigned int regf;
-       unsigned int reg10;
-       unsigned int reg11;
-       unsigned int reg12;
-       unsigned int reg13;
-       unsigned int reg14;
-       unsigned int reg15;
-       unsigned int reg16;
-       unsigned int reg17;
-       unsigned int reg18;
-       unsigned int reg19;
-       unsigned int reg1a;
-       unsigned int reg1b;
-       unsigned int reg1c;
-       unsigned int reg1d;
-       unsigned int reg1e;
-       unsigned int reg1f;
-};
+#define ALT_TSE_SW_RESET_TIMEOUT               (3 * CONFIG_SYS_HZ)
+#define ALT_TSE_SGDMA_BUSY_TIMEOUT             (3 * CONFIG_SYS_HZ)
 
 /* MAC register Space */
 
 struct alt_tse_mac {
        unsigned int megacore_revision;
        unsigned int scratch_pad;
-       alt_tse_command_config command_config;
+       unsigned int command_config;
        unsigned int mac_addr_0;
        unsigned int mac_addr_1;
        unsigned int max_frame_length;
@@ -413,8 +211,8 @@ struct alt_tse_mac {
        unsigned int reservedxE4;
 
        /*FIFO control register. */
-       alt_tse_tx_cmd_stat tx_cmd_stat;
-       alt_tse_rx_cmd_stat rx_cmd_stat;
+       unsigned int tx_cmd_stat;
+       unsigned int rx_cmd_stat;
 
        unsigned int ipaccTxConf;
        unsigned int ipaccRxConf;
@@ -425,8 +223,8 @@ struct alt_tse_mac {
        unsigned int hash_table[64];
 
        /*Registers 0 to 31 within PHY device 0/1 */
-       struct alt_tse_mdio mdio_phy0;
-       struct alt_tse_mdio mdio_phy1;
+       unsigned int mdio_phy0[0x20];
+       unsigned int mdio_phy1[0x20];
 
        /*4 Supplemental MAC Addresses */
        unsigned int supp_mac_addr_0_0;
@@ -441,52 +239,19 @@ struct alt_tse_mac {
        unsigned int reservedx320[56];
 };
 
-/* flags: TSE MII modes */
-/* GMII/MII    = 0 */
-/* RGMII       = 1 */
-/* RGMII_ID    = 2 */
-/* RGMII_TXID  = 3 */
-/* RGMII_RXID  = 4 */
-/* SGMII       = 5 */
 struct altera_tse_priv {
-       char devname[16];
-       volatile struct alt_tse_mac *mac_dev;
-       volatile struct alt_sgdma_registers *sgdma_rx;
-       volatile struct alt_sgdma_registers *sgdma_tx;
-       unsigned int rx_sgdma_irq;
-       unsigned int tx_sgdma_irq;
-       unsigned int has_descriptor_mem;
-       unsigned int descriptor_mem_base;
-       unsigned int descriptor_mem_size;
-       volatile struct alt_sgdma_descriptor *rx_desc;
-       volatile struct alt_sgdma_descriptor *tx_desc;
-       volatile unsigned char *rx_buf;
-       struct phy_info *phyinfo;
+       struct alt_tse_mac *mac_dev;
+       struct alt_sgdma_registers *sgdma_rx;
+       struct alt_sgdma_registers *sgdma_tx;
+       unsigned int rx_fifo_depth;
+       unsigned int tx_fifo_depth;
+       struct alt_sgdma_descriptor *rx_desc;
+       struct alt_sgdma_descriptor *tx_desc;
+       unsigned char *rx_buf;
        unsigned int phyaddr;
-       unsigned int flags;
-       unsigned int link;
-       unsigned int duplexity;
-       unsigned int speed;
+       unsigned int interface;
+       struct phy_device *phydev;
+       struct mii_dev *bus;
 };
 
-/* Phy stuff continued */
-/*
- * struct phy_cmd:  A command for reading or writing a PHY register
- *
- * mii_reg:  The register to read or write
- *
- * mii_data:  For writes, the value to put in the register.
- *     A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- *     For reads, this function will be passed the value read
- *     from the PHY, and process it.
- *     For writes, the result of this function will be written
- *     to the PHY register
- */
-struct phy_cmd {
-       uint mii_reg;
-       uint mii_data;
-       uint(*funct) (uint mii_reg, struct altera_tse_priv *priv);
-};
 #endif /* _ALTERA_TSE_H_ */
index 8cff3ded1cc0564b1e086caf5fed3f9d38ba8fb1..b38513e99b07bda6a675459def63743499e61f27 100644 (file)
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      512
 
+/*
+ * MII/PHY
+ */
+#define CONFIG_CMD_MII                 1
+#define CONFIG_PHY_GIGE                        1
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        1
+#define CONFIG_PHY_MARVELL             1
+
 /*
  * BOOTP options
  */