* Copyright (c) 2011 The Chromium OS Authors.
* SPDX-License-Identifier: GPL-2.0+
*/
-
+#define DEBUG
#include <common.h>
+#include <dm.h>
#include <fdtdec.h>
-#include <lcd.h>
-
+#include <video.h>
#include <asm/system.h>
#include <asm/gpio.h>
#include <asm/io.h>
/* Information about the display controller */
struct tegra_lcd_priv {
- int valid; /* config is valid */
int width; /* width in pixels */
int height; /* height in pixels */
int bpp; /* number of bits per pixel */
uint panel_timings[FDT_LCD_TIMINGS];
};
-/* Our LCD config, set up in handle_stage() */
-static struct tegra_lcd_priv config;
-struct tegra_lcd_priv *disp_config; /* Display controller config */
-
enum {
/* Maximum LCD size we support */
LCD_MAX_WIDTH = 1366,
LCD_MAX_HEIGHT = 768,
- LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */
-};
-
-vidinfo_t panel_info = {
- /* Insert a value here so that we don't end up in the BSS */
- .vl_col = -1,
+ LCD_MAX_LOG2_BPP = VIDEO_BPP16,
};
static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
writel(val, &dc->cmd.state_ctrl);
}
-static void write_pair(struct tegra_lcd_priv *config, int item, u32 *reg)
+static void write_pair(struct tegra_lcd_priv *priv, int item, u32 *reg)
{
- writel(config->horiz_timing[item] |
- (config->vert_timing[item] << 16), reg);
+ writel(priv->horiz_timing[item] |
+ (priv->vert_timing[item] << 16), reg);
}
static int update_display_mode(struct dc_disp_reg *disp,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
unsigned long val;
unsigned long rate;
unsigned long div;
writel(0x0, &disp->disp_timing_opt);
- write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
- write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
- write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
- write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
+ write_pair(priv, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
+ write_pair(priv, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
+ write_pair(priv, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
+ write_pair(priv, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
- writel(config->width | (config->height << 16), &disp->disp_active);
+ writel(priv->width | (priv->height << 16), &disp->disp_active);
val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
* up or down as requried.
*/
rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
- div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2;
+ div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2;
debug("Display clock %lu, divider %lu\n", rate, div);
writel(0x00010001, &disp->shift_clk_opt);
}
static int setup_window(struct disp_ctl_win *win,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
win->x = 0;
win->y = 0;
- win->w = config->width;
- win->h = config->height;
+ win->w = priv->width;
+ win->h = priv->height;
win->out_x = 0;
win->out_y = 0;
- win->out_w = config->width;
- win->out_h = config->height;
- win->phys_addr = config->frame_buffer;
- win->stride = config->width * (1 << config->log2_bpp) / 8;
- debug("%s: depth = %d\n", __func__, config->log2_bpp);
- switch (config->log2_bpp) {
+ win->out_w = priv->width;
+ win->out_h = priv->height;
+ win->phys_addr = priv->frame_buffer;
+ win->stride = priv->width * (1 << priv->log2_bpp) / 8;
+ debug("%s: depth = %d\n", __func__, priv->log2_bpp);
+ switch (priv->log2_bpp) {
case 5:
case 24:
win->fmt = COLOR_DEPTH_R8G8B8A8;
return 0;
}
-/**
- * Return the current display configuration
- *
- * @return pointer to display configuration, or NULL if there is no valid
- * config
- */
-struct tegra_lcd_priv *tegra_display_get_config(void)
-{
- return config.valid ? &config : NULL;
-}
-
static void debug_timing(const char *name, unsigned int timing[])
{
#ifdef DEBUG
*
* @param blob fdt blob
* @param node offset of fdt node to read from
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt config into
* @return 0 if ok, -ve on error
*/
static int tegra_decode_panel(const void *blob, int node,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
int front, back, ref;
- config->width = fdtdec_get_int(blob, node, "xres", -1);
- config->height = fdtdec_get_int(blob, node, "yres", -1);
- config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
- if (!config->pixel_clock || config->width == -1 ||
- config->height == -1) {
+ priv->width = fdtdec_get_int(blob, node, "xres", -1);
+ priv->height = fdtdec_get_int(blob, node, "yres", -1);
+ priv->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
+ if (!priv->pixel_clock || priv->width == -1 || priv->height == -1) {
debug("%s: Pixel parameters missing\n", __func__);
return -FDT_ERR_NOTFOUND;
}
}
/* Use a ref-to-sync of 1 always, and take this from the front porch */
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("horiz", config->horiz_timing);
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("horiz", priv->horiz_timing);
back = fdtdec_get_int(blob, node, "upper-margin", -1);
front = fdtdec_get_int(blob, node, "lower-margin", -1);
return -FDT_ERR_NOTFOUND;
}
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("vert", config->vert_timing);
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("vert", priv->vert_timing);
return 0;
}
* Decode the display controller information from the fdt.
*
* @param blob fdt blob
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt priv into
* @return 0 if ok, -ve on error
*/
-static int tegra_display_decode_config(const void *blob,
- struct tegra_lcd_priv *config)
+static int tegra_display_decode_config(const void *blob, int node,
+ struct tegra_lcd_priv *priv)
{
- int node, rgb;
+ int rgb;
int bpp, bit;
- /* TODO: Support multiple controllers */
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC);
- if (node < 0) {
- debug("%s: Cannot find display controller node in fdt\n",
- __func__);
- return node;
- }
- config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
- if (!config->disp) {
+ priv->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ if (!priv->disp) {
debug("%s: No display controller address\n", __func__);
return -1;
}
rgb = fdt_subnode_offset(blob, node, "rgb");
- config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
- if (config->panel_node < 0) {
+ priv->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
+ if (priv->panel_node < 0) {
debug("%s: Cannot find panel information\n", __func__);
return -1;
}
- if (tegra_decode_panel(blob, config->panel_node, config)) {
+ if (tegra_decode_panel(blob, priv->panel_node, priv)) {
debug("%s: Failed to decode panel information\n", __func__);
return -1;
}
- bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel",
+ bpp = fdtdec_get_int(blob, priv->panel_node, "nvidia,bits-per-pixel",
-1);
bit = ffs(bpp) - 1;
if (bpp == (1 << bit))
- config->log2_bpp = bit;
+ priv->log2_bpp = bit;
else
- config->log2_bpp = bpp;
+ priv->log2_bpp = bpp;
if (bpp == -1) {
debug("%s: Pixel bpp parameters missing\n", __func__);
return -FDT_ERR_NOTFOUND;
}
- config->bpp = bpp;
-
- config->valid = 1; /* we have a valid configuration */
+ priv->bpp = bpp;
return 0;
}
* struct tegra_lcd_priv to see what was actually chosen.
*
* @param blob Device tree blob
+ * @param priv Driver's private data
* @param default_lcd_base Default address of LCD frame buffer
* @return 0 if ok, -1 on error (unsupported bits per pixel)
*/
-static int tegra_display_probe(const void *blob, void *default_lcd_base)
+static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv,
+ void *default_lcd_base)
{
struct disp_ctl_win window;
struct dc_ctlr *dc;
- if (tegra_display_decode_config(blob, &config))
- return -1;
-
- config.frame_buffer = (u32)default_lcd_base;
+ priv->frame_buffer = (u32)default_lcd_base;
- dc = (struct dc_ctlr *)config.disp;
+ dc = (struct dc_ctlr *)priv->disp;
/*
* A header file for clock constants was NAKed upstream.
basic_init_timer(&dc->disp);
rgb_enable(&dc->com);
- if (config.pixel_clock)
- update_display_mode(&dc->disp, &config);
+ if (priv->pixel_clock)
+ update_display_mode(&dc->disp, priv);
- if (setup_window(&window, &config))
+ if (setup_window(&window, priv))
return -1;
update_window(dc, &window);
return 0;
}
-static void update_panel_size(struct tegra_lcd_priv *config)
-{
- panel_info.vl_col = config->width;
- panel_info.vl_row = config->height;
- panel_info.vl_bpix = config->log2_bpp;
-}
-
-/*
- * Main init function called by lcd driver.
- * Inits and then prints test pattern if required.
- */
-
-void lcd_ctrl_init(void *lcdbase)
-{
- int type = DCACHE_OFF;
- int size;
-
- assert(disp_config);
-
- /* Make sure that we can acommodate the selected LCD */
- assert(disp_config->width <= LCD_MAX_WIDTH);
- assert(disp_config->height <= LCD_MAX_HEIGHT);
- assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP);
- if (disp_config->width <= LCD_MAX_WIDTH
- && disp_config->height <= LCD_MAX_HEIGHT
- && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP)
- update_panel_size(disp_config);
- size = lcd_get_size(&lcd_line_length);
-
- /* Set up the LCD caching as requested */
- if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
- type = DCACHE_WRITETHROUGH;
- else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
- type = DCACHE_WRITEBACK;
- mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);
-
- /* Enable flushing after LCD writes if requested */
- lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
-
- debug("LCD frame buffer at %pa\n", &disp_config->frame_buffer);
-}
-
-ulong calc_fbsize(void)
-{
- return (panel_info.vl_col * panel_info.vl_row *
- NBITS(panel_info.vl_bpix)) / 8;
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void tegra_lcd_early_init(const void *blob)
-{
- /*
- * Go with the maximum size for now. We will fix this up after
- * relocation. These values are only used for memory alocation.
- */
- panel_info.vl_col = LCD_MAX_WIDTH;
- panel_info.vl_row = LCD_MAX_HEIGHT;
- panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
-}
-
/**
* Decode the panel information from the fdt.
*
* @param blob fdt blob
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt config into
* @return 0 if ok, -ve on error
*/
-static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *config)
+static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *priv)
{
int display_node;
- disp_config = tegra_display_get_config();
- if (!disp_config) {
- debug("%s: Display controller is not configured\n", __func__);
- return -1;
- }
- display_node = disp_config->panel_node;
+ display_node = priv->panel_node;
if (display_node < 0) {
debug("%s: No panel configuration available\n", __func__);
return -1;
}
- config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
- if (config->pwm_channel < 0) {
+ priv->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
+ if (priv->pwm_channel < 0) {
debug("%s: Unable to request PWM channel\n", __func__);
return -1;
}
- config->cache_type = fdtdec_get_int(blob, display_node,
+ priv->cache_type = fdtdec_get_int(blob, display_node,
"nvidia,cache-type",
FDT_LCD_CACHE_WRITE_BACK_FLUSH);
/* These GPIOs are all optional */
gpio_request_by_name_nodev(blob, display_node,
"nvidia,backlight-enable-gpios", 0,
- &config->backlight_en, GPIOD_IS_OUT);
+ &priv->backlight_en, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,lvds-shutdown-gpios", 0,
- &config->lvds_shutdown, GPIOD_IS_OUT);
+ &priv->lvds_shutdown, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,backlight-vdd-gpios", 0,
- &config->backlight_vdd, GPIOD_IS_OUT);
+ &priv->backlight_vdd, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,panel-vdd-gpios", 0,
- &config->panel_vdd, GPIOD_IS_OUT);
+ &priv->panel_vdd, GPIOD_IS_OUT);
return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings",
- config->panel_timings, FDT_LCD_TIMINGS);
+ priv->panel_timings, FDT_LCD_TIMINGS);
}
/**
* Handle the next stage of device init
*/
-static int handle_stage(const void *blob)
+static int handle_stage(const void *blob, struct tegra_lcd_priv *priv)
{
debug("%s: stage %d\n", __func__, stage);
/* do the things for this stage */
switch (stage) {
case STAGE_START:
- /* Initialize the Tegra display controller */
- if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) {
- printf("%s: Failed to probe display driver\n",
- __func__);
- return -1;
- }
-
- /* get panel details */
- if (fdt_decode_lcd(blob, &config)) {
- printf("No valid LCD information in device tree\n");
- return -1;
- }
-
/*
* It is possible that the FDT has requested that the LCD be
* disabled. We currently don't support this. It would require
funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
break;
case STAGE_PANEL_VDD:
- if (dm_gpio_is_valid(&config.panel_vdd))
- dm_gpio_set_value(&config.panel_vdd, 1);
+ if (dm_gpio_is_valid(&priv->panel_vdd))
+ dm_gpio_set_value(&priv->panel_vdd, 1);
break;
case STAGE_LVDS:
- if (dm_gpio_is_valid(&config.lvds_shutdown))
- dm_gpio_set_value(&config.lvds_shutdown, 1);
+ if (dm_gpio_is_valid(&priv->lvds_shutdown))
+ dm_gpio_set_value(&priv->lvds_shutdown, 1);
break;
case STAGE_BACKLIGHT_VDD:
- if (dm_gpio_is_valid(&config.backlight_vdd))
- dm_gpio_set_value(&config.backlight_vdd, 1);
+ if (dm_gpio_is_valid(&priv->backlight_vdd))
+ dm_gpio_set_value(&priv->backlight_vdd, 1);
break;
case STAGE_PWM:
/* Enable PWM at 15/16 high, 32768 Hz with divider 1 */
pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
pinmux_tristate_disable(PMUX_PINGRP_GPU);
- pwm_enable(config.pwm_channel, 32768, 0xdf, 1);
+ pwm_enable(priv->pwm_channel, 32768, 0xdf, 1);
break;
case STAGE_BACKLIGHT_EN:
- if (dm_gpio_is_valid(&config.backlight_en))
- dm_gpio_set_value(&config.backlight_en, 1);
+ if (dm_gpio_is_valid(&priv->backlight_en))
+ dm_gpio_set_value(&priv->backlight_en, 1);
break;
case STAGE_DONE:
break;
/* set up timer for next stage */
timer_next = timer_get_us();
if (stage < FDT_LCD_TIMINGS)
- timer_next += config.panel_timings[stage] * 1000;
+ timer_next += priv->panel_timings[stage] * 1000;
/* move to next stage */
stage++;
return 0;
}
-int tegra_lcd_check_next_stage(const void *blob, int wait)
+/**
+ * Perform the next stage of the LCD init if it is time to do so.
+ *
+ * LCD init can be time-consuming because of the number of delays we need
+ * while waiting for the backlight power supply, etc. This function can
+ * be called at various times during U-Boot operation to advance the
+ * initialization of the LCD to the next stage if sufficient time has
+ * passed since the last stage. It keeps track of what stage it is up to
+ * and the time that it is permitted to move to the next stage.
+ *
+ * The final call should have wait=1 to complete the init.
+ *
+ * @param blob fdt blob containing LCD information
+ * @param wait 1 to wait until all init is complete, and then return
+ * 0 to return immediately, potentially doing nothing if it is
+ * not yet time for the next init.
+ */
+static int tegra_lcd_check_next_stage(const void *blob,
+ struct tegra_lcd_priv *priv, int wait)
{
if (stage == STAGE_DONE)
return 0;
}
}
- if (handle_stage(blob))
+ if (handle_stage(blob, priv))
return -1;
} while (wait && stage != STAGE_DONE);
if (stage == STAGE_DONE)
return 0;
}
-void lcd_enable(void)
+static int tegra_lcd_probe(struct udevice *dev)
{
- /*
- * Backlight and power init will be done separately in
- * tegra_lcd_check_next_stage(), which should be called in
- * board_late_init().
- *
- * U-Boot code supports only colour depth, selected at compile time.
- * The device tree setting should match this. Otherwise the display
- * will not look right, and U-Boot may crash.
- */
- if (disp_config->log2_bpp != LCD_BPP) {
- printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)"
- " must match setting of LCD_BPP (%d)\n", __func__,
- disp_config->log2_bpp, disp_config->bpp, LCD_BPP);
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct tegra_lcd_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int type = DCACHE_OFF;
+
+ if (tegra_display_decode_config(blob, dev->of_offset, priv))
+ return -1;
+
+ /* get panel details */
+ if (fdt_decode_lcd(blob, priv)) {
+ printf("No valid LCD information in device tree\n");
+ return -1;
+ }
+
+ /* Initialize the Tegra display controller */
+ if (tegra_display_probe(blob, priv, (void *)plat->base)) {
+ printf("%s: Failed to probe display driver\n", __func__);
+ return -1;
}
+
+ tegra_lcd_check_next_stage(blob, priv, 1);
+
+ /* Set up the LCD caching as requested */
+ if (priv->cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
+ type = DCACHE_WRITETHROUGH;
+ else if (priv->cache_type & FDT_LCD_CACHE_WRITE_BACK)
+ type = DCACHE_WRITEBACK;
+ mmu_set_region_dcache_behaviour(priv->frame_buffer, plat->size, type);
+
+ /* Enable flushing after LCD writes if requested */
+ video_set_flush_dcache(dev, priv->cache_type & FDT_LCD_CACHE_FLUSH);
+
+ uc_priv->xsize = priv->width;
+ uc_priv->ysize = priv->height;
+ uc_priv->bpix = priv->log2_bpp;
+ debug("LCD frame buffer at %pa, size %x\n", &priv->frame_buffer,
+ plat->size);
+
+ return 0;
+}
+
+static int tegra_lcd_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+ plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+ (1 << LCD_MAX_LOG2_BPP) / 8;
+
+ return 0;
}
+
+static const struct video_ops tegra_lcd_ops = {
+};
+
+static const struct udevice_id tegra_lcd_ids[] = {
+ { .compatible = "nvidia,tegra20-dc" },
+ { }
+};
+
+U_BOOT_DRIVER(tegra_lcd) = {
+ .name = "tegra_lcd",
+ .id = UCLASS_VIDEO,
+ .of_match = tegra_lcd_ids,
+ .ops = &tegra_lcd_ops,
+ .bind = tegra_lcd_bind,
+ .probe = tegra_lcd_probe,
+ .priv_auto_alloc_size = sizeof(struct tegra_lcd_priv),
+};
projects / people / ms / u-boot.git / commitdiff
