bool
default n
+config FSP_BROKEN_HOB
+ bool
+ default y
+
endif
dtb-y += bayleybay.dtb \
chromebook_link.dtb \
chromebox_panther.dtb \
+ cougarcanyon2.dtb \
crownbay.dtb \
efi.dtb \
galileo.dtb \
--- /dev/null
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+/include/ "keyboard.dtsi"
+/include/ "rtc.dtsi"
+/include/ "tsc_timer.dtsi"
+
+/ {
+ model = "Intel Cougar Canyon 2";
+ compatible = "intel,cougarcanyon2", "intel,chiefriver";
+
+ aliases {
+ spi0 = &spi0;
+ };
+
+ config {
+ silent_console = <0>;
+ };
+
+ chosen {
+ stdout-path = "/serial";
+ };
+
+ microcode {
+ update@0 {
+#include "microcode/m12306a2_00000008.dtsi"
+ };
+ update@1 {
+#include "microcode/m12306a4_00000007.dtsi"
+ };
+ update@2 {
+#include "microcode/m12306a5_00000007.dtsi"
+ };
+ update@3 {
+#include "microcode/m12306a8_00000010.dtsi"
+ };
+ update@4 {
+#include "microcode/m12306a9_0000001b.dtsi"
+ };
+ };
+
+ fsp {
+ compatible = "intel,ivybridge-fsp";
+ fsp,enable-ht;
+ };
+
+ pci {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "pci-x86";
+ u-boot,dm-pre-reloc;
+ ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000
+ 0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
+ 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
+
+ pch@1f,0 {
+ reg = <0x0000f800 0 0 0 0>;
+ compatible = "intel,bd82x6x";
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ spi0: spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ich9-spi";
+ spi-flash@0 {
+ reg = <0>;
+ compatible = "winbond,w25q64bv", "spi-flash";
+ memory-map = <0xff800000 0x00800000>;
+ };
+ };
+
+ gpioa {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0 0x10>;
+ bank-name = "A";
+ };
+
+ gpiob {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x30 0x10>;
+ bank-name = "B";
+ };
+
+ gpioc {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x40 0x10>;
+ bank-name = "C";
+ };
+ };
+ };
+
+};
4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
PCIe and some other sensor interfaces.
+config TARGET_COUGARCANYON2
+ bool "Cougar Canyon 2"
+ help
+ This is the Intel Cougar Canyon 2 Customer Reference Board. It
+ is built on the Chief River platform with Intel Ivybridge Processor
+ and Panther Point chipset. The board has 4GB RAM, with some other
+ peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI.
+
config TARGET_CROWNBAY
bool "Crown Bay"
help
endchoice
source "board/intel/bayleybay/Kconfig"
+source "board/intel/cougarcanyon2/Kconfig"
source "board/intel/crownbay/Kconfig"
source "board/intel/galileo/Kconfig"
source "board/intel/minnowmax/Kconfig"
--- /dev/null
+if TARGET_COUGARCANYON2
+
+config SYS_BOARD
+ default "cougarcanyon2"
+
+config SYS_VENDOR
+ default "intel"
+
+config SYS_SOC
+ default "ivybridge"
+
+config SYS_CONFIG_NAME
+ default "cougarcanyon2"
+
+config SYS_TEXT_BASE
+ default 0xffe00000
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select X86_RESET_VECTOR
+ select NORTHBRIDGE_INTEL_IVYBRIDGE
+ select HAVE_FSP
+ select BOARD_ROMSIZE_KB_2048
+
+endif
--- /dev/null
+INTEL COUGAR CANYON 2 BOARD
+M: Bin Meng <bmeng.cn@gmail.com>
+S: Maintained
+F: board/intel/cougarcanyon2/
+F: include/configs/cougarcanyon2.h
+F: configs/cougarcanyon2_defconfig
--- /dev/null
+#
+# Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cougarcanyon2.o start.o
--- /dev/null
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <pci.h>
+#include <smsc_sio1007.h>
+#include <asm/ibmpc.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+#define SIO1007_RUNTIME_IOPORT 0x180
+
+int board_early_init_f(void)
+{
+ struct udevice *pch;
+ int ret;
+
+ ret = uclass_first_device(UCLASS_PCH, &pch);
+ if (ret)
+ return ret;
+ if (!pch)
+ return -ENODEV;
+
+ /* Initialize LPC interface to turn on superio chipset decode range */
+ dm_pci_write_config16(pch, LPC_IO_DEC, COMA_DEC_RANGE | COMB_DEC_RANGE);
+ dm_pci_write_config16(pch, LPC_EN, KBC_LPC_EN | COMA_LPC_EN);
+ dm_pci_write_config32(pch, LPC_GEN1_DEC, GEN_DEC_RANGE_256B |
+ (SIO1007_IOPORT3 & 0xff00) | GEN_DEC_RANGE_EN);
+ dm_pci_write_config32(pch, LPC_GEN2_DEC, GEN_DEC_RANGE_16B |
+ SIO1007_RUNTIME_IOPORT | GEN_DEC_RANGE_EN);
+
+ /* Enable legacy serial port at 0x3f8 */
+ sio1007_enable_serial(SIO1007_IOPORT3, 0, UART0_BASE, UART0_IRQ);
+
+ /* Enable SIO1007 runtime I/O port at 0x180 */
+ sio1007_enable_runtime(SIO1007_IOPORT3, SIO1007_RUNTIME_IOPORT);
+
+ /*
+ * On Cougar Canyon 2 board, the RS232 transiver connected to serial
+ * port 0 (0x3f8) is controlled by a GPIO pin (GPIO10) on the SIO1007.
+ * Set the pin value to 1 to enable the RS232 transiver.
+ */
+ sio1007_gpio_config(SIO1007_IOPORT3, 0, GPIO_DIR_OUTPUT,
+ GPIO_POL_NO_INVERT, GPIO_TYPE_PUSH_PULL);
+ sio1007_gpio_set_value(SIO1007_RUNTIME_IOPORT, 0, 1);
+
+ return 0;
+}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+ return;
+}
--- /dev/null
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+ jmp early_board_init_ret
--- /dev/null
+CONFIG_X86=y
+CONFIG_VENDOR_INTEL=y
+CONFIG_DEFAULT_DEVICE_TREE="cougarcanyon2"
+CONFIG_TARGET_COUGARCANYON2=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_SYS_NS16550=y
+CONFIG_ICH_SPI=y
+CONFIG_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USE_PRIVATE_LIBGCC=y
---
+Intel Cougar Canyon 2 specific instructions for bare mode:
+
+This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors
+with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP
+website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the
+time of writing) in the board directory and rename it to fsp.bin.
+
+Now build U-Boot and obtain u-boot.rom
+
+$ make cougarcanyon2_defconfig
+$ make all
+
+The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in
+the board manual. The SPI-0 flash should have flash descriptor plus ME firmware
+and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0
+flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program
+this image to the SPI-0 flash according to the board manual just once and we are
+all set. For programming U-Boot we just need to program SPI-1 flash.
+
+---
+
Intel Minnowboard Max instructions for bare mode:
This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
--- /dev/null
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN (2 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SMSC_SIO1007
+
+#define CONFIG_PCI_PNP
+
+#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0"
+
+#define CONFIG_SCSI_DEV_LIST \
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+
+/* Environment configuration */
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_ENV_OFFSET 0x5ff000
+
+/* Video is not supported for now */
+#undef CONFIG_VIDEO
+#undef CONFIG_CFB_CONSOLE
+
+#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / commitdiff
