omap5: Migrate CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC to Kconfig

While in theory this value could be used in places outside of "omap5"
(such as OMAP4), we only make use of it today in OMAP5, so place the
Kconfig entry there.  Given that Kconfig lets us provide a default, we
drop CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC entirely.  The contents of
doc/README.omap-reset-time make a good help entry, so adjust them
slightly and delete the file.  Move the comment about range to where we
use the value now, and have Kconfig enforce the upper bound.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/README b/README
index 2ca0102b57b74f03106c33d20052d08ce9f5eac2..f4eecd0a0bd1c70617bda4c8f8790faaf5546f0b 100644 (file)
--- a/README
+++ b/README
@@ -3708,11 +3708,6 @@ Configuration Settings:
        If defined, don't allow the -f switch to env set override variable
        access flags.
 
-- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
-       This is set by OMAP boards for the max time that reset should
-       be asserted. See doc/README.omap-reset-time for details on how
-       the value can be calculated on a given board.
-
 - CONFIG_USE_STDINT
        If stdint.h is available with your toolchain you can define this
        option to enable it. You can provide option 'USE_STDINT=1' when

diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 7ea7199f2b74e2dc67b4bf948e50cf312a84764d..0c99bbdc9320326e843099d0d399f305ca903ced 100644 (file)
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -370,13 +370,6 @@
 #define DPLL_NO_LOCK   0
 #define DPLL_LOCK      1
 
-/*
- * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff.
- * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles
- * into microsec and passing the value.
- */
-#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC        31219
-
 #if defined(CONFIG_DRA7XX)
 #define V_OSCK                 20000000        /* Clock output from T2 */
 #else

diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig
index c89c43830587b31963e28fd48d570123a951e763..1a66abdeb297a2e8ac9ee3e2da1d14b8ed152729 100644 (file)
--- a/arch/arm/mach-omap2/omap5/Kconfig
+++ b/arch/arm/mach-omap2/omap5/Kconfig
@@ -63,6 +63,23 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
          using hardware memory firewalls. This value must be smaller than the
          TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
 
+config OMAP_PLATFORM_RESET_TIME_MAX_USEC
+       int "Something"
+       range 0  31219
+       default 31219
+       help
+         Most OMAPs' provide a way to specify the time for which the reset
+         should be held low while the voltages and Oscillator outputs
+         stabilize.
+         This time is mostly board and PMIC dependent. Hence the boards are
+         expected to specify a pre-computed time using the above option.
+         This value can be computed using a summation of the below 3
+         parameters
+         1: Time taken by the Osciallator to stop and restart
+         2: PMIC OTP time
+         3: Voltage ramp time, which can be derived using the PMIC slew rate
+            and value of voltage ramp needed.
+
 if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM
 menu "Voltage Domain OPP selections"
 

diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c
index 839d79d10204a97f8e3c6a91191dd6be1ddcb034..afe59e0b58260180191dd91d036fc17f6fd30098 100644 (file)
--- a/arch/arm/mach-omap2/omap5/hwinit.c
+++ b/arch/arm/mach-omap2/omap5/hwinit.c
@@ -414,12 +414,13 @@ void setup_warmreset_time(void)
 {
        u32 rst_time, rst_val;
 
-#ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC
-       rst_time = CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC;
-#else
-       rst_time = CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC;
-#endif
-       rst_time = usec_to_32k(rst_time) << RSTTIME1_SHIFT;
+       /*
+        * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff.
+        * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles
+        * into microsec and passing the value.
+        */
+       rst_time = usec_to_32k(CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC)
+               << RSTTIME1_SHIFT;
 
        if (rst_time > RSTTIME1_MASK)
                rst_time = RSTTIME1_MASK;

diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig
index d7fd995f7a4080b3fc5cdfd1fb16b7235331a314..0afc6a27416fac329c07836e7ee27fa3ed825aa2 100644 (file)
--- a/configs/cm_t54_defconfig
+++ b/configs/cm_t54_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP54XX=y
 CONFIG_TARGET_CM_T54=y
+CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=3

diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig
index 865845ee9ca0946902436cb237d10b5b9950b80b..9eefec5cd510cd22f8c363d4bef1f0b0526c8d59 100644 (file)
--- a/configs/omap5_uevm_defconfig
+++ b/configs/omap5_uevm_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_OMAP54XX=y
 CONFIG_TARGET_OMAP5_UEVM=y
+CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_ARMV7_LPAE=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y

diff --git a/doc/README.omap-reset-time b/doc/README.omap-reset-time
deleted file mode 100644 (file)
index 0c974ba..0000000
--- a/doc/README.omap-reset-time
+++ /dev/null
@@ -1,20 +0,0 @@
-README on how reset time on OMAPs should be calculated
-
-CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC:
-Most OMAPs' provide a way to specify the time for
-which the reset should be held low while the voltages
-and Oscillator outputs stabilize.
-
-This time is mostly board and PMIC dependent. Hence the
-boards are expected to specify a pre-computed time
-using the above option, (the details on how to compute
-the value are given below) without which a default time
-as specified by CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC
-is used.
-
-The value for CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC
-can be computed using a summation of the below 3 parameters
--1- Time taken by the Osciallator to stop and restart
--2- PMIC OTP time
--3- Voltage ramp time, which can be derived using the
-PMIC slew rate and value of voltage ramp needed.

diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 477aa07bd89ea30cfeef3379b26ef4b5bea52779..d7e7c29298bda8e5ceb784bc25a10ac6997024f4 100644 (file)
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -86,9 +86,6 @@
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
 
-/* Max time to hold reset on this board, see doc/README.omap-reset-time */
-#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC       16296
-
 /*
  * Miscellaneous configurable options
  */

diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 533bb02c5e2261cc71f23740158eba962c916728..6ac5d506f6a4c5982d603bb3f024fd5a2deb6a6c 100644 (file)
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -68,9 +68,6 @@
 
 #define CONSOLEDEV             "ttyO2"
 
-/* Max time to hold reset on this board, see doc/README.omap-reset-time */
-#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC       16296
-
 #define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 5febd2a1d7a4c3f3261680be2d9e6056ad422ada..87719048ca9605f6da9e4415e309b5d47e87a9f0 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -617,7 +617,6 @@ CONFIG_DEEP_SLEEP
 CONFIG_DEFAULT
 CONFIG_DEFAULT_CONSOLE
 CONFIG_DEFAULT_IMMR
-CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC
 CONFIG_DEFAULT_SPI_BUS
 CONFIG_DEFAULT_SPI_CS
 CONFIG_DEFAULT_SPI_MODE
@@ -1999,7 +1998,6 @@ CONFIG_OMAP_EHCI_PHY1_RESET_GPIO
 CONFIG_OMAP_EHCI_PHY2_RESET_GPIO
 CONFIG_OMAP_EHCI_PHY3_RESET_GPIO
 CONFIG_OMAP_GPIO
-CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC
 CONFIG_OMAP_USB2PHY2_HOST
 CONFIG_OMAP_USB3PHY1_HOST
 CONFIG_OMAP_USB_PHY