#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#include <qemu_fw_cfg.h>
#include <asm/atomic.h>
#include <asm/cpu.h>
#include <asm/interrupt.h>
#include <asm/mtrr.h>
#include <asm/processor.h>
#include <asm/sipi.h>
-#include <asm/fw_cfg.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#include <dm/lists.h>
ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
-obj-y += cpu.o fw_cfg.o qemu.o
+obj-y += cpu.o qemu.o
+obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o
--- /dev/null
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qemu_fw_cfg.h>
+#include <asm/io.h>
+#include <asm/tables.h>
+#include <asm/e820.h>
+#include <linux/list.h>
+#include <memalign.h>
+
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ * (either high memory or low memory)
+ * @addr : The address that should be used for low memory allcation. If the
+ * memory allocation request is 'ZONE_HIGH' then this parameter will
+ * be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
+{
+ uint32_t size, align;
+ struct fw_file *file;
+ unsigned long aligned_addr;
+
+ align = le32_to_cpu(entry->alloc.align);
+ /* align must be power of 2 */
+ if (align & (align - 1)) {
+ printf("error: wrong alignment %u\n", align);
+ return -EINVAL;
+ }
+
+ file = qemu_fwcfg_find_file(entry->alloc.file);
+ if (!file) {
+ printf("error: can't find file %s\n", entry->alloc.file);
+ return -ENOENT;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+
+ /*
+ * ZONE_HIGH means we need to allocate from high memory, since
+ * malloc space is already at the end of RAM, so we directly use it.
+ * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+ * in which is low memory
+ */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+ aligned_addr = (unsigned long)memalign(align, size);
+ if (!aligned_addr) {
+ printf("error: allocating resource\n");
+ return -ENOMEM;
+ }
+ } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+ aligned_addr = ALIGN(*addr, align);
+ } else {
+ printf("error: invalid allocation zone\n");
+ return -EINVAL;
+ }
+
+ debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+ file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, (void *)aligned_addr);
+ file->addr = aligned_addr;
+
+ /* adjust address for low memory allocation */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+ *addr = (aligned_addr + size);
+
+ return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ * ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct bios_linker_entry *entry)
+{
+ struct fw_file *dest, *src;
+ uint32_t offset = le32_to_cpu(entry->pointer.offset);
+ uint64_t pointer = 0;
+
+ dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
+ if (!dest || !dest->addr)
+ return -ENOENT;
+ src = qemu_fwcfg_find_file(entry->pointer.src_file);
+ if (!src || !src->addr)
+ return -ENOENT;
+
+ debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+ dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+ memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+ pointer = le64_to_cpu(pointer);
+ pointer += (unsigned long)src->addr;
+ pointer = cpu_to_le64(pointer);
+ memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+ return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ * checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+{
+ struct fw_file *file;
+ uint8_t *data, cksum = 0;
+ uint8_t *cksum_start;
+
+ file = qemu_fwcfg_find_file(entry->cksum.file);
+ if (!file || !file->addr)
+ return -ENOENT;
+
+ data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+ cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+ cksum = table_compute_checksum(cksum_start,
+ le32_to_cpu(entry->cksum.length));
+ *data = cksum;
+
+ return 0;
+}
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+ entries[0].addr = 0;
+ entries[0].size = ISA_START_ADDRESS;
+ entries[0].type = E820_RAM;
+
+ entries[1].addr = ISA_START_ADDRESS;
+ entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
+ entries[1].type = E820_RESERVED;
+
+ /*
+ * since we use memalign(malloc) to allocate high memory for
+ * storing ACPI tables, we need to reserve them in e820 tables,
+ * otherwise kernel will reclaim them and data will be corrupted
+ */
+ entries[2].addr = ISA_END_ADDRESS;
+ entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
+ entries[2].type = E820_RAM;
+
+ /* for simplicity, reserve entire malloc space */
+ entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
+ entries[3].size = TOTAL_MALLOC_LEN;
+ entries[3].type = E820_RESERVED;
+
+ entries[4].addr = gd->relocaddr;
+ entries[4].size = gd->ram_size - gd->relocaddr;
+ entries[4].type = E820_RESERVED;
+
+ entries[5].addr = CONFIG_PCIE_ECAM_BASE;
+ entries[5].size = CONFIG_PCIE_ECAM_SIZE;
+ entries[5].type = E820_RESERVED;
+
+ return 6;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+u32 write_acpi_tables(u32 addr)
+{
+ int i, ret = 0;
+ struct fw_file *file;
+ struct bios_linker_entry *table_loader;
+ struct bios_linker_entry *entry;
+ uint32_t size;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret) {
+ printf("error: can't read firmware file list\n");
+ return addr;
+ }
+
+ file = qemu_fwcfg_find_file("etc/table-loader");
+ if (!file) {
+ printf("error: can't find etc/table-loader\n");
+ return addr;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+ if ((size % sizeof(*entry)) != 0) {
+ printf("error: table-loader maybe corrupted\n");
+ return addr;
+ }
+
+ table_loader = malloc(size);
+ if (!table_loader) {
+ printf("error: no memory for table-loader\n");
+ return addr;
+ }
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, table_loader);
+
+ for (i = 0; i < (size / sizeof(*entry)); i++) {
+ entry = table_loader + i;
+ switch (le32_to_cpu(entry->command)) {
+ case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+ ret = bios_linker_allocate(entry, &addr);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+ ret = bios_linker_add_pointer(entry);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+ ret = bios_linker_add_checksum(entry);
+ if (ret)
+ goto out;
+ break;
+ default:
+ break;
+ }
+ }
+
+out:
+ if (ret)
+ qemu_fwcfg_free_files();
+
+ free(table_loader);
+ return addr;
+}
#include <cpu.h>
#include <dm.h>
#include <errno.h>
+#include <qemu_fw_cfg.h>
#include <asm/cpu.h>
-#include <asm/fw_cfg.h>
DECLARE_GLOBAL_DATA_PTR;
#include <common.h>
#include <pci.h>
+#include <qemu_fw_cfg.h>
#include <asm/irq.h>
#include <asm/post.h>
#include <asm/processor.h>
#include <asm/arch/device.h>
#include <asm/arch/qemu.h>
-#include <asm/fw_cfg.h>
static bool i440fx;
/*
* QEMU's version of write_acpi_tables is defined in
- * arch/x86/cpu/qemu/fw_cfg.c
+ * arch/x86/cpu/qemu/acpi_table.c
*/
u32 write_acpi_tables(u32 start)
{
sound init - set up sound system
sound play - play a sound
+config CMD_QEMU_FW_CFG
+ bool "qfw"
+ depends on X86
+ help
+ This provides access to the QEMU firmware interface. The main
+ feature is to allow easy loading of files passed to qemu-system
+ via -kernel / -initrd
endmenu
config CMD_BOOTSTAGE
obj-y += pcmcia.o
obj-$(CONFIG_CMD_PORTIO) += portio.o
obj-$(CONFIG_CMD_PXE) += pxe.o
+obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o
obj-$(CONFIG_CMD_READ) += read.o
obj-$(CONFIG_CMD_REGINFO) += reginfo.o
obj-$(CONFIG_CMD_REISER) += reiser.o
#include <command.h>
#include <errno.h>
#include <malloc.h>
+#include <qemu_fw_cfg.h>
#include <asm/io.h>
-#include <asm/fw_cfg.h>
-#include <asm/tables.h>
-#include <asm/e820.h>
#include <linux/list.h>
-#include <memalign.h>
static bool fwcfg_present;
static bool fwcfg_dma_present;
return false;
}
-static void qemu_fwcfg_read_entry(uint16_t entry,
- uint32_t length, void *address)
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
{
if (fwcfg_dma_present)
qemu_fwcfg_read_entry_dma(entry, length, address);
return 0;
}
-static int qemu_fwcfg_read_firmware_list(void)
+int qemu_fwcfg_read_firmware_list(void)
{
int i;
uint32_t count;
return -ENOMEM;
}
-#ifdef CONFIG_QEMU_ACPI_TABLE
-static struct fw_file *qemu_fwcfg_find_file(const char *name)
+struct fw_file *qemu_fwcfg_find_file(const char *name)
{
struct list_head *entry;
struct fw_file *file;
return NULL;
}
-/*
- * This function allocates memory for ACPI tables
- *
- * @entry : BIOS linker command entry which tells where to allocate memory
- * (either high memory or low memory)
- * @addr : The address that should be used for low memory allcation. If the
- * memory allocation request is 'ZONE_HIGH' then this parameter will
- * be ignored.
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
-{
- uint32_t size, align;
- struct fw_file *file;
- unsigned long aligned_addr;
-
- align = le32_to_cpu(entry->alloc.align);
- /* align must be power of 2 */
- if (align & (align - 1)) {
- printf("error: wrong alignment %u\n", align);
- return -EINVAL;
- }
-
- file = qemu_fwcfg_find_file(entry->alloc.file);
- if (!file) {
- printf("error: can't find file %s\n", entry->alloc.file);
- return -ENOENT;
- }
-
- size = be32_to_cpu(file->cfg.size);
-
- /*
- * ZONE_HIGH means we need to allocate from high memory, since
- * malloc space is already at the end of RAM, so we directly use it.
- * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
- * in which is low memory
- */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
- aligned_addr = (unsigned long)memalign(align, size);
- if (!aligned_addr) {
- printf("error: allocating resource\n");
- return -ENOMEM;
- }
- } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
- aligned_addr = ALIGN(*addr, align);
- } else {
- printf("error: invalid allocation zone\n");
- return -EINVAL;
- }
-
- debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
- file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, (void *)aligned_addr);
- file->addr = aligned_addr;
-
- /* adjust address for low memory allocation */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
- *addr = (aligned_addr + size);
-
- return 0;
-}
-
-/*
- * This function patches ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells how to patch
- * ACPI tables
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_pointer(struct bios_linker_entry *entry)
-{
- struct fw_file *dest, *src;
- uint32_t offset = le32_to_cpu(entry->pointer.offset);
- uint64_t pointer = 0;
-
- dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
- if (!dest || !dest->addr)
- return -ENOENT;
- src = qemu_fwcfg_find_file(entry->pointer.src_file);
- if (!src || !src->addr)
- return -ENOENT;
-
- debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
- dest->addr, src->addr, offset, entry->pointer.size, pointer);
-
- memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
- pointer = le64_to_cpu(pointer);
- pointer += (unsigned long)src->addr;
- pointer = cpu_to_le64(pointer);
- memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
-
- return 0;
-}
-
-/*
- * This function updates checksum fields of ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells where to update ACPI table
- * checksums
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+void qemu_fwcfg_free_files(void)
{
struct fw_file *file;
- uint8_t *data, cksum = 0;
- uint8_t *cksum_start;
-
- file = qemu_fwcfg_find_file(entry->cksum.file);
- if (!file || !file->addr)
- return -ENOENT;
-
- data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
- cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
- cksum = table_compute_checksum(cksum_start,
- le32_to_cpu(entry->cksum.length));
- *data = cksum;
-
- return 0;
-}
-
-unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
-{
- entries[0].addr = 0;
- entries[0].size = ISA_START_ADDRESS;
- entries[0].type = E820_RAM;
-
- entries[1].addr = ISA_START_ADDRESS;
- entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
- entries[1].type = E820_RESERVED;
-
- /*
- * since we use memalign(malloc) to allocate high memory for
- * storing ACPI tables, we need to reserve them in e820 tables,
- * otherwise kernel will reclaim them and data will be corrupted
- */
- entries[2].addr = ISA_END_ADDRESS;
- entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
- entries[2].type = E820_RAM;
-
- /* for simplicity, reserve entire malloc space */
- entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
- entries[3].size = TOTAL_MALLOC_LEN;
- entries[3].type = E820_RESERVED;
-
- entries[4].addr = gd->relocaddr;
- entries[4].size = gd->ram_size - gd->relocaddr;
- entries[4].type = E820_RESERVED;
-
- entries[5].addr = CONFIG_PCIE_ECAM_BASE;
- entries[5].size = CONFIG_PCIE_ECAM_SIZE;
- entries[5].type = E820_RESERVED;
-
- return 6;
-}
-
-/* This function loads and patches ACPI tables provided by QEMU */
-u32 write_acpi_tables(u32 addr)
-{
- int i, ret = 0;
- struct fw_file *file;
- struct bios_linker_entry *table_loader;
- struct bios_linker_entry *entry;
- uint32_t size;
struct list_head *list;
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret) {
- printf("error: can't read firmware file list\n");
- return addr;
+ list_for_each(list, &fw_list) {
+ file = list_entry(list, struct fw_file, list);
+ if (file->addr)
+ free((void *)file->addr);
}
-
- file = qemu_fwcfg_find_file("etc/table-loader");
- if (!file) {
- printf("error: can't find etc/table-loader\n");
- return addr;
- }
-
- size = be32_to_cpu(file->cfg.size);
- if ((size % sizeof(*entry)) != 0) {
- printf("error: table-loader maybe corrupted\n");
- return addr;
- }
-
- table_loader = malloc(size);
- if (!table_loader) {
- printf("error: no memory for table-loader\n");
- return addr;
- }
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, table_loader);
-
- for (i = 0; i < (size / sizeof(*entry)); i++) {
- entry = table_loader + i;
- switch (le32_to_cpu(entry->command)) {
- case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
- ret = bios_linker_allocate(entry, &addr);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
- ret = bios_linker_add_pointer(entry);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
- ret = bios_linker_add_checksum(entry);
- if (ret)
- goto out;
- break;
- default:
- break;
- }
- }
-
-out:
- if (ret) {
- list_for_each(list, &fw_list) {
- file = list_entry(list, struct fw_file, list);
- if (file->addr)
- free((void *)file->addr);
- }
- }
-
- free(table_loader);
- return addr;
}
-#endif
static int qemu_fwcfg_list_firmware(void)
{
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_QEMU_FW_CFG=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
*/
void qemu_fwcfg_init(void);
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
+int qemu_fwcfg_read_firmware_list(void);
+struct fw_file *qemu_fwcfg_find_file(const char *name);
+void qemu_fwcfg_free_files(void);
+
/**
* Get system cpu number
*
projects / people / ms / u-boot.git / commitdiff
