--- /dev/null
+/*
+ * SoC-specific code for tms320dm644x chips
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+
+#define PINMUX0_EMACEN (1 << 31)
+#define PINMUX0_AECS5 (1 << 11)
+#define PINMUX0_AECS4 (1 << 10)
+
+#define PINMUX1_I2C (1 << 7)
+#define PINMUX1_UART1 (1 << 1)
+#define PINMUX1_UART0 (1 << 0)
+
+
+void davinci_enable_uart0(void)
+{
+ lpsc_on(DAVINCI_LPSC_UART0);
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= PINMUX1_UART0;
+}
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+void davinci_enable_emac(void)
+{
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable EMAC. */
+ REG(PINMUX0) |= PINMUX0_EMACEN;
+}
+#endif
+
+void davinci_enable_i2c(void)
+{
+ lpsc_on(DAVINCI_LPSC_I2C);
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= PINMUX1_I2C;
+}
+
+void davinci_errata_workarounds(void)
+{
+ /*
+ * Workaround for TMS320DM6446 errata 1.3.22:
+ * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
+ * Revision(s) Affected: 1.3 and earlier
+ */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /*
+ * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
+ * as suggested in TMS320DM6446 errata 2.1.2:
+ *
+ * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
+ * low priority modules can occupy the bus and prevent high priority
+ * modules like the VPSS from getting the required DDR2 throughput.
+ * A hex value of 0x20 should provide a good ARM (cache enabled)
+ * performance and still allow good utilization by the VPSS or other
+ * modules.
+ */
+ REG(VBPR) = 0x20;
+}
#include <common.h>
#include <asm/arch/hardware.h>
-#define PINMUX0_EMACEN (1 << 31)
-#define PINMUX0_AECS5 (1 << 11)
-#define PINMUX0_AECS4 (1 << 10)
-
-#define PINMUX1_I2C (1 << 7)
-#define PINMUX1_UART1 (1 << 1)
-#define PINMUX1_UART0 (1 << 0)
-
/*
- * The DM6446 includes two separate power domains: "Always On" and "DSP". The
- * "Always On" power domain is always on when the chip is on. The "Always On"
- * domain is powered by the VDD pins of the DM6446. The majority of the
- * DM6446's modules lie within the "Always On" power domain. A separate
- * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain
- * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of
- * the DM6446.
+ * The PSC manages three inputs to a "module" which may be a peripheral or
+ * CPU. Those inputs are the module's: clock; reset signal; and sometimes
+ * its power domain. For our purposes, we only care whether clock and power
+ * are active, and the module is out of reset.
+ *
+ * DaVinci chips may include two separate power domains: "Always On" and "DSP".
+ * Chips without a DSP generally have only one domain.
+ *
+ * The "Always On" power domain is always on when the chip is on, and is
+ * powered by the VDD pins (on DM644X). The majority of DaVinci modules
+ * lie within the "Always On" power domain.
+ *
+ * A separate domain called the "DSP" domain houses the C64x+ and other video
+ * hardware such as VICP. In some chips, the "DSP" domain is not always on.
+ * The "DSP" power domain is powered by the CVDDDSP pins (on DM644X).
*/
/* Works on Always On power domain only (no PD argument) */
mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
- while (REG(PSC_PTSTAT) & 0x01);
+ while (REG(PSC_PTSTAT) & 0x01)
+ continue;
if ((*mdstat & 0x1f) == 0x03)
return; /* Already on and enabled */
*mdctl |= 0x03;
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
switch (id) {
+#ifdef CONFIG_SOC_DM644X
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
case DAVINCI_LPSC_VPSSSLV:
case DAVINCI_LPSC_EMAC:
case DAVINCI_LPSC_EMAC_WRAPPER:
case DAVINCI_LPSC_GPIO:
*mdctl |= 0x200;
break;
+#endif
}
REG(PSC_PTCMD) = 0x01;
- while (REG(PSC_PTSTAT) & 0x03);
- while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
+ while (REG(PSC_PTSTAT) & 0x03)
+ continue;
+ while ((*mdstat & 0x1f) != 0x03) /* Probably an overkill... */
+ continue;
}
+/* Not all DaVinci chips have a DSP power domain. */
+#ifdef CONFIG_SOC_DM644X
+
/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
#if !defined(CONFIG_SYS_USE_DSPLINK)
void dsp_on(void)
}
#endif /* CONFIG_SYS_USE_DSPLINK */
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= PINMUX1_UART0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable EMAC. */
- REG(PINMUX0) |= PINMUX0_EMACEN;
-}
-#endif
-
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= PINMUX1_I2C;
-}
-
-void davinci_errata_workarounds(void)
-{
- /*
- * Workaround for TMS320DM6446 errata 1.3.22:
- * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
- * Revision(s) Affected: 1.3 and earlier
- */
- REG(PSC_SILVER_BULLET) = 0;
-
- /*
- * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
- * as suggested in TMS320DM6446 errata 2.1.2:
- *
- * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
- * low priority modules can occupy the bus and prevent high priority
- * modules like the VPSS from getting the required DDR2 throughput.
- * A hex value of 0x20 should provide a good ARM (cache enabled)
- * performance and still allow good utilization by the VPSS or other
- * modules.
- */
- REG(VBPR) = 0x20;
-}
+#endif /* have a DSP */
projects / people / ms / u-boot.git / commitdiff
