N: Andre Schwarz
E: andre.schwarz@matrix-vision.de
-D: Support for Matrix Vision boards (MVBLM7/MVBC_P)
+D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR)
N: Robert Schwebel
E: r.schwebel@pengutronix.de
mvbc_p MPC5200
mvblm7 MPC8343
+ mvsmr MPC5200
Jon Smirl <jonsmirl@gmail.com>
openrd_base ARM926EJS (Kirkwood SoC)
+Minkyu Kang <mk7.kang@samsung.com>
+
+ SMDKC100 ARM CORTEX-A8 (S5PC100 SoC)
+
Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
SONATA ARM926EJS
SCHMOOGIE ARM926EJS
-Sandeep Paulraj <s-paulraj@ti.com>
-
- davinci_dm355evm ARM926EJS
- davinci_dm355leopard ARM926EJS
- davinci_dm365evm ARM926EJS
- davinci_dm6467evm ARM926EJS
-
Prakash Kumar <prakash@embedx.com>
cerf250 xscale
+Vipin Kumar <vipin.kumar@st.com>
+
+ spear300 ARM926EJS (spear300 Soc)
+ spear310 ARM926EJS (spear310 Soc)
+ spear320 ARM926EJS (spear320 Soc)
+ spear600 ARM926EJS (spear600 Soc)
+
Sergey Lapin <slapin@ossfans.org>
afeb9260 ARM926EJS (AT91SAM9260 SoC)
apollon ARM1136EJS
+Sandeep Paulraj <s-paulraj@ti.com>
+
+ davinci_dm355evm ARM926EJS
+ davinci_dm355leopard ARM926EJS
+ davinci_dm365evm ARM926EJS
+ davinci_dm6467evm ARM926EJS
+
Peter Pearse <peter.pearse@arm.com>
integratorcp All current ARM supplied & supported core modules
-see http://www.arm.com/products/DevTools/Hardware_Platforms.html
lart SA1100
dnp1110 SA1110
-Minkyu Kang <mk7.kang@samsung.com>
-
- SMDKC100 ARM CORTEX-A8 (S5PC100 SoC)
-
-------------------------------------------------------------------------
Unknown / orphaned boards:
motionpro \
munices \
MVBC_P \
+ MVSMR \
o2dnt \
pcm030 \
pf5200 \
{ echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; }
@$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
+MVSMR_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/matrix_vision/mvsmr
+ @$(MKCONFIG) $(@:_config=) ppc mpc5xxx mvsmr matrix_vision
+
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
images, gzipped BMP images can be displayed via the
splashscreen support or the bmp command.
+- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8
+
+ If this option is set, 8-bit RLE compressed BMP images
+ can be displayed via the splashscreen support or the
+ bmp command.
+
- Compression support:
CONFIG_BZIP2
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (unsigned char *) info->start[sect];
- writeb (addr, 0xaa);
- writeb (addr, 0x55);
- writeb (addr, 0x80);
- writeb (addr, 0xaa);
- writeb (addr, 0x55);
- writeb (addr2, 0x30);
+ writeb (0xaa, addr);
+ writeb (0x55, addr);
+ writeb (0x80, addr);
+ writeb (0xaa, addr);
+ writeb (0x55, addr);
+ writeb (0x30, addr2);
/* Now just wait for 0xff & provide some user
* feedback while we wait.
*/
return (2);
}
- writeb (cmd, 0xaa);
- writeb (cmd, 0x55);
- writeb (cmd, 0xa0);
- writeb (dst, b);
+ writeb (0xaa, cmd);
+ writeb (0x55, cmd);
+ writeb (0xa0, cmd);
+ writeb (b, dst);
/* Verify write */
start = get_timer (0);
val &= ~mask;
else
val |= mask;
- writel (&pio->data, val);
+ writel (val, &pio->data);
}
void __led_set (led_id_t mask, int state)
val &= ~mask;
else
val |= mask;
- writel (&pio->data, val);
+ writel (val, &pio->data);
}
void __led_toggle (led_id_t mask)
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
val ^= mask;
- writel (&pio->data, val);
+ writel (val, &pio->data);
}
#ifdef CONFIG_SMC91111
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
-#ifdef CONFIG_PCI
rc += pci_eth_init(bis);
-#endif
return rc;
}
#endif
COBJS-${CONFIG_FSL_VIA} += cds_via.o
COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o
COBJS-${CONFIG_FSL_PIXIS} += pixis.o
+COBJS-${CONFIG_FSL_NGPIXIS} += ngpixis.o
COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o
COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o
COBJS-${CONFIG_FSL_SGMII_RISER} += sgmii_riser.o
--- /dev/null
+/**
+ * Copyright 2010 Freescale Semiconductor
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This file provides support for the ngPIXIS, a board-specific FPGA used on
+ * some Freescale reference boards.
+ *
+ * A "switch" is black rectangular block on the motherboard. It contains
+ * eight "bits". The ngPIXIS has a set of memory-mapped registers (SWx) that
+ * shadow the actual physical switches. There is also another set of
+ * registers (ENx) that tell the ngPIXIS which bits of SWx should actually be
+ * used to override the values of the bits in the physical switches.
+ *
+ * The following macros need to be defined:
+ *
+ * PIXIS_BASE - The virtual address of the base of the PIXIS register map
+ *
+ * PIXIS_LBMAP_SWITCH - The switch number (i.e. the "x" in "SWx"). This value
+ * is used in the PIXIS_SW() macro to determine which offset in
+ * the PIXIS register map corresponds to the physical switch that controls
+ * the boot bank.
+ *
+ * PIXIS_LBMAP_MASK - A bit mask the defines which bits in SWx to use.
+ *
+ * PIXIS_LBMAP_SHIFT - The shift value that corresponds to PIXIS_LBMAP_MASK.
+ *
+ * PIXIS_LBMAP_ALTBANK - The value to program into SWx to tell the ngPIXIS to
+ * boot from the alternate bank.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <watchdog.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+#include "ngpixis.h"
+
+/*
+ * Reset the board. This ignores the ENx registers.
+ */
+void pixis_reset(void)
+{
+ out_8(&pixis->rst, 0);
+
+ while (1);
+}
+
+/*
+ * Reset the board. Like pixis_reset(), but it honors the ENx registers.
+ */
+void pixis_bank_reset(void)
+{
+ out_8(&pixis->vctl, 0);
+ out_8(&pixis->vctl, 1);
+
+ while (1);
+}
+
+/**
+ * Set the boot bank to the power-on default bank
+ */
+void clear_altbank(void)
+{
+ /* Tell the ngPIXIS to use this the bits in the physical switch for the
+ * boot bank value, instead of the SWx register. We need to be careful
+ * only to set the bits in SWx that correspond to the boot bank.
+ */
+ clrbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK);
+}
+
+/**
+ * Set the boot bank to the alternate bank
+ */
+void set_altbank(void)
+{
+ /* Program the alternate bank number into the SWx register.
+ */
+ clrsetbits_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK,
+ PIXIS_LBMAP_ALTBANK);
+
+ /* Tell the ngPIXIS to use this the bits in the SWx register for the
+ * boot bank value, instead of the physical switch. We need to be
+ * careful only to set the bits in SWx that correspond to the boot bank.
+ */
+ setbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK);
+}
+
+
+int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ unsigned int i;
+ char *p_altbank = NULL;
+ char *unknown_param = NULL;
+
+ /* No args is a simple reset request.
+ */
+ if (argc <= 1)
+ pixis_reset();
+
+ for (i = 1; i < argc; i++) {
+ if (strcmp(argv[i], "altbank") == 0) {
+ p_altbank = argv[i];
+ continue;
+ }
+
+ unknown_param = argv[i];
+ }
+
+ if (unknown_param) {
+ printf("Invalid option: %s\n", unknown_param);
+ return 1;
+ }
+
+ if (p_altbank)
+ set_altbank();
+ else
+ clear_altbank();
+
+ pixis_bank_reset();
+
+ /* Shouldn't be reached. */
+ return 0;
+}
+
+U_BOOT_CMD(
+ pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
+ "Reset the board using the FPGA sequencer",
+ "- hard reset to default bank\n"
+ "pixis_reset altbank - reset to alternate bank\n"
+ );
--- /dev/null
+/**
+ * Copyright 2010 Freescale Semiconductor
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This file provides support for the ngPIXIS, a board-specific FPGA used on
+ * some Freescale reference boards.
+ */
+
+/* ngPIXIS register set. Hopefully, this won't change too much over time.
+ * Feel free to add board-specific #ifdefs where necessary.
+ */
+typedef struct ngpixis {
+ u8 id;
+ u8 arch;
+ u8 scver;
+ u8 csr;
+ u8 rst;
+ u8 res1;
+ u8 aux;
+ u8 spd;
+ u8 brdcfg0;
+ u8 dma;
+ u8 addr;
+ u8 res2[2];
+ u8 data;
+ u8 led;
+ u8 res3;
+ u8 vctl;
+ u8 vstat;
+ u8 vcfgen0;
+ u8 res4;
+ u8 ocmcsr;
+ u8 ocmmsg;
+ u8 gmdbg;
+ u8 res5[2];
+ u8 sclk[3];
+ u8 dclk[3];
+ u8 watch;
+ struct {
+ u8 sw;
+ u8 en;
+ } s[8];
+} ngpixis_t __attribute__ ((aligned(1)));
+
+/* Pointer to the PIXIS register set */
+#define pixis ((ngpixis_t *)PIXIS_BASE)
+
+/* The PIXIS SW register that corresponds to board switch X, where x >= 1 */
+#define PIXIS_SW(x) (pixis->s[(x) - 1].sw)
+
+/* The PIXIS EN register that corresponds to board switch X, where x >= 1 */
+#define PIXIS_EN(x) (pixis->s[(x) - 1].en)
/*
- * Copyright 2006 Freescale Semiconductor
+ * Copyright 2006,2010 Freescale Semiconductor
* Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
#include <common.h>
#include <command.h>
-#include <watchdog.h>
-#include <asm/cache.h>
#include <asm/io.h>
-#include "pixis.h"
-
-
-static ulong strfractoint(uchar *strptr);
-
+#define pixis_base (u8 *)PIXIS_BASE
/*
* Simple board reset.
*/
void pixis_reset(void)
{
- u8 *pixis_base = (u8 *)PIXIS_BASE;
out_8(pixis_base + PIXIS_RST, 0);
-}
+ while (1);
+}
/*
* Per table 27, page 58 of MPC8641HPCN spec.
*/
-int set_px_sysclk(ulong sysclk)
+static int set_px_sysclk(unsigned long sysclk)
{
u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
switch (sysclk) {
case 33:
return 1;
}
-
-int set_px_mpxpll(ulong mpxpll)
+/* Set the CFG_SYSPLL bits
+ *
+ * This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
+ * read_from_px_regs() is called.
+ */
+static int set_px_mpxpll(unsigned long mpxpll)
{
- u8 tmp;
- u8 val;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
switch (mpxpll) {
case 2:
case 4:
case 12:
case 14:
case 16:
- val = (u8) mpxpll;
- break;
- default:
- printf("Unsupported MPXPLL ratio.\n");
- return 0;
+ clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
+ return 1;
}
- tmp = in_8(pixis_base + PIXIS_VSPEED1);
- tmp = (tmp & 0xF0) | (val & 0x0F);
- out_8(pixis_base + PIXIS_VSPEED1, tmp);
-
- return 1;
+ printf("Unsupported MPXPLL ratio.\n");
+ return 0;
}
-
-int set_px_corepll(ulong corepll)
+static int set_px_corepll(unsigned long corepll)
{
- u8 tmp;
u8 val;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- switch ((int)corepll) {
+ switch (corepll) {
case 20:
val = 0x08;
break;
return 0;
}
- tmp = in_8(pixis_base + PIXIS_VSPEED0);
- tmp = (tmp & 0xE0) | (val & 0x1F);
- out_8(pixis_base + PIXIS_VSPEED0, tmp);
-
+ clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
return 1;
}
+#ifndef CONFIG_SYS_PIXIS_VCFGEN0_ENABLE
+#define CONFIG_SYS_PIXIS_VCFGEN0_ENABLE 0x1C
+#endif
-void read_from_px_regs(int set)
+/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
+ *
+ * The PIXIS can be programmed to look at either the on-board dip switches
+ * or various other PIXIS registers to determine the values for COREPLL,
+ * MPXPLL, and SYSCLK.
+ *
+ * CONFIG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
+ * register that tells the pixis to use the various PIXIS register.
+ */
+static void read_from_px_regs(int set)
{
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- u8 mask = 0x1C; /* COREPLL, MPXPLL, SYSCLK controlled by PIXIS */
u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);
if (set)
- tmp = tmp | mask;
+ tmp = tmp | CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
else
- tmp = tmp & ~mask;
+ tmp = tmp & ~CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
+
out_8(pixis_base + PIXIS_VCFGEN0, tmp);
}
+/* CONFIG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
+ * register that tells the pixis to use the PX_VBOOT[LBMAP] register.
+ */
+#ifndef CONFIG_SYS_PIXIS_VBOOT_ENABLE
+#define CONFIG_SYS_PIXIS_VBOOT_ENABLE 0x04
+#endif
-void read_from_px_regs_altbank(int set)
+/* Configure the source of the boot location
+ *
+ * The PIXIS can be programmed to look at either the on-board dip switches
+ * or the PX_VBOOT[LBMAP] register to determine where we should boot.
+ *
+ * If we want to boot from the alternate boot bank, we need to tell the PIXIS
+ * to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
+ */
+static void read_from_px_regs_altbank(int set)
{
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- u8 mask = 0x04; /* FLASHBANK and FLASHMAP controlled by PIXIS */
u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);
if (set)
- tmp = tmp | mask;
+ tmp = tmp | CONFIG_SYS_PIXIS_VBOOT_ENABLE;
else
- tmp = tmp & ~mask;
+ tmp = tmp & ~CONFIG_SYS_PIXIS_VBOOT_ENABLE;
+
out_8(pixis_base + PIXIS_VCFGEN1, tmp);
}
+/* CONFIG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
+ * tells the PIXIS what the alternate flash bank is.
+ *
+ * Note that it's not really a mask. It contains the actual LBMAP bits that
+ * must be set to select the alternate bank. This code assumes that the
+ * primary bank has these bits set to 0, and the alternate bank has these
+ * bits set to 1.
+ */
#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
#define CONFIG_SYS_PIXIS_VBOOT_MASK (0x40)
#endif
-void clear_altbank(void)
+/* Tell the PIXIS to boot from the default flash bank
+ *
+ * Program the default flash bank into the VBOOT register. This register is
+ * used only if PX_VCFGEN1[FLASH]=1.
+ */
+static void clear_altbank(void)
{
- u8 tmp;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- tmp = in_8(pixis_base + PIXIS_VBOOT);
- tmp &= ~CONFIG_SYS_PIXIS_VBOOT_MASK;
-
- out_8(pixis_base + PIXIS_VBOOT, tmp);
+ clrbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
}
-
-void set_altbank(void)
+/* Tell the PIXIS to boot from the alternate flash bank
+ *
+ * Program the alternate flash bank into the VBOOT register. This register is
+ * used only if PX_VCFGEN1[FLASH]=1.
+ */
+static void set_altbank(void)
{
- u8 tmp;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- tmp = in_8(pixis_base + PIXIS_VBOOT);
- tmp |= CONFIG_SYS_PIXIS_VBOOT_MASK;
-
- out_8(pixis_base + PIXIS_VBOOT, tmp);
+ setbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
}
-
-void set_px_go(void)
+/* Reset the board with watchdog disabled.
+ *
+ * This respects the altbank setting.
+ */
+static void set_px_go(void)
{
- u8 tmp;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
+ /* Disable the VELA sequencer and watchdog */
+ clrbits_8(pixis_base + PIXIS_VCTL, 9);
- tmp = in_8(pixis_base + PIXIS_VCTL);
- tmp = tmp & 0x1E; /* clear GO bit */
- out_8(pixis_base + PIXIS_VCTL, tmp);
+ /* Reboot by starting the VELA sequencer */
+ setbits_8(pixis_base + PIXIS_VCTL, 0x1);
- tmp = in_8(pixis_base + PIXIS_VCTL);
- tmp = tmp | 0x01; /* set GO bit - start reset sequencer */
- out_8(pixis_base + PIXIS_VCTL, tmp);
+ while (1);
}
-
-void set_px_go_with_watchdog(void)
+/* Reset the board with watchdog enabled.
+ *
+ * This respects the altbank setting.
+ */
+static void set_px_go_with_watchdog(void)
{
- u8 tmp;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
+ /* Disable the VELA sequencer */
+ clrbits_8(pixis_base + PIXIS_VCTL, 1);
- tmp = in_8(pixis_base + PIXIS_VCTL);
- tmp = tmp & 0x1E;
- out_8(pixis_base + PIXIS_VCTL, tmp);
+ /* Enable the watchdog and reboot by starting the VELA sequencer */
+ setbits_8(pixis_base + PIXIS_VCTL, 0x9);
- tmp = in_8(pixis_base + PIXIS_VCTL);
- tmp = tmp | 0x09;
- out_8(pixis_base + PIXIS_VCTL, tmp);
+ while (1);
}
-
-int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
- int flag, int argc, char *argv[])
+/* Disable the watchdog
+ *
+ */
+static int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *argv[])
{
- u8 tmp;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- tmp = in_8(pixis_base + PIXIS_VCTL);
- tmp = tmp & 0x1E;
- out_8(pixis_base + PIXIS_VCTL, tmp);
-
- /* setting VCTL[WDEN] to 0 to disable watch dog */
- tmp = in_8(pixis_base + PIXIS_VCTL);
- tmp &= ~0x08;
- out_8(pixis_base + PIXIS_VCTL, tmp);
+ /* Disable the VELA sequencer and the watchdog */
+ clrbits_8(pixis_base + PIXIS_VCTL, 9);
return 0;
}
);
#ifdef CONFIG_PIXIS_SGMII_CMD
-int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+
+/* Enable or disable SGMII mode for a TSEC
+ */
+static int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int which_tsec = -1;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- uchar mask;
- uchar switch_mask;
+ unsigned char mask;
+ unsigned char switch_mask;
- if (argc > 2)
- if (strcmp(argv[1], "all") != 0)
- which_tsec = simple_strtoul(argv[1], NULL, 0);
+ if ((argc > 2) && (strcmp(argv[1], "all") != 0))
+ which_tsec = simple_strtoul(argv[1], NULL, 0);
switch (which_tsec) {
#ifdef CONFIG_TSEC1
" off - disables SGMII\n"
" switch - use switch settings"
);
+
#endif
/*
* FPGA register values.
* input: strptr i.e. argv[2]
*/
-
-static ulong strfractoint(uchar *strptr)
+static unsigned long strfractoint(char *strptr)
{
- int i, j, retval;
+ int i, j;
int mulconst;
- int intarr_len = 0, decarr_len = 0, no_dec = 0;
- ulong intval = 0, decval = 0;
- uchar intarr[3], decarr[3];
+ int intarr_len, no_dec = 0;
+ unsigned long intval = 0, decval = 0;
+ char intarr[3], decarr[3];
/* Assign the integer part to intarr[]
* If there is no decimal point i.e.
j++;
}
- decarr_len = j;
decarr[j] = '\0';
mulconst = 1;
- for (i = 0; i < decarr_len; i++)
+ for (i = 0; i < j; i++)
mulconst *= 10;
- decval = simple_strtoul((char *)decarr, NULL, 10);
+ decval = simple_strtoul(decarr, NULL, 10);
}
- intval = simple_strtoul((char *)intarr, NULL, 10);
+ intval = simple_strtoul(intarr, NULL, 10);
intval = intval * mulconst;
- retval = intval + decval;
-
- return retval;
+ return intval + decval;
}
-
-int
-pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
unsigned int i;
char *p_cf = NULL;
char *p_cf_mpxpll = NULL;
char *p_altbank = NULL;
char *p_wd = NULL;
- unsigned int unknown_param = 0;
+ int unknown_param = 0;
/*
* No args is a simple reset request.
*/
read_from_px_regs(0);
- if (p_altbank) {
+ if (p_altbank)
read_from_px_regs_altbank(0);
- }
+
clear_altbank();
/*
unsigned long mpxpll;
sysclk = simple_strtoul(p_cf_sysclk, NULL, 10);
- corepll = strfractoint((uchar *) p_cf_corepll);
+ corepll = strfractoint(p_cf_corepll);
mpxpll = simple_strtoul(p_cf_mpxpll, NULL, 10);
if (!(set_px_sysclk(sysclk)
/*
* Reset with watchdog specified.
*/
- if (p_wd) {
+ if (p_wd)
set_px_go_with_watchdog();
- } else {
+ else
set_px_go();
- }
/*
* Shouldn't be reached.
#include <netdev.h>
#include <sata.h>
-#include "../common/pixis.h"
#include "../common/sgmii_riser.h"
phys_size_t fixed_sdram(void);
#include <tsec.h>
#include <netdev.h>
-#include "../common/pixis.h"
#include "../common/sgmii_riser.h"
int checkboard (void)
#include <tsec.h>
#include <netdev.h>
-#include "../common/pixis.h"
#include "../common/sgmii_riser.h"
long int fixed_sdram(void);
#include <spd_sdram.h>
#include <netdev.h>
-#include "../common/pixis.h"
-
void sdram_init(void);
phys_size_t fixed_sdram(void);
void mpc8610hpcd_diu_init(void);
#ifdef CONFIG_FSL_DIU_FB
-#include "../common/pixis.h"
#include "../common/fsl_diu_fb.h"
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
#include <fdt_support.h>
#include <netdev.h>
-#include "../common/pixis.h"
-
phys_size_t fixed_sdram(void);
int board_early_init_f(void)
#include <asm/mp.h>
#include <netdev.h>
-#include "../common/pixis.h"
+#include "../common/ngpixis.h"
#include "../common/sgmii_riser.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
- u8 sw7;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
+ u8 sw;
puts("Board: P2020DS ");
#ifdef CONFIG_PHYS_64BIT
puts("(36-bit addrmap) ");
#endif
- printf("Sys ID: 0x%02x, "
- "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
- in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
- in_8(pixis_base + PIXIS_PVER));
+ printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
- sw7 = in_8(pixis_base + PIXIS_SW(7));
- switch ((sw7 & PIXIS_SW7_LBMAP) >> 6) {
- case 0:
- case 1:
- printf ("vBank: %d\n", ((sw7 & PIXIS_SW7_VBANK) >> 4));
- break;
- case 2:
- case 3:
- puts ("Promjet\n");
- break;
- }
+ sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
+ sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ /* The lower two bits are the actual vbank number */
+ printf("vBank: %d\n", sw & 3);
+ else
+ puts("Promjet\n");
return 0;
}
return gd->mem_clk;
}
-unsigned long
-calculate_board_sys_clk(ulong dummy)
+unsigned long calculate_board_sys_clk(ulong dummy)
{
ulong val;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- val = ics307_clk_freq(
- in_8(pixis_base + PIXIS_VSYSCLK0),
- in_8(pixis_base + PIXIS_VSYSCLK1),
- in_8(pixis_base + PIXIS_VSYSCLK2));
+ val = ics307_clk_freq(in_8(&pixis->sclk[0]), in_8(&pixis->sclk[1]),
+ in_8(&pixis->sclk[2]));
debug("sysclk val = %lu\n", val);
return val;
}
-unsigned long
-calculate_board_ddr_clk(ulong dummy)
+unsigned long calculate_board_ddr_clk(ulong dummy)
{
ulong val;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- val = ics307_clk_freq(
- in_8(pixis_base + PIXIS_VDDRCLK0),
- in_8(pixis_base + PIXIS_VDDRCLK1),
- in_8(pixis_base + PIXIS_VDDRCLK2));
+ val = ics307_clk_freq(in_8(&pixis->dclk[0]), in_8(&pixis->dclk[1]),
+ in_8(&pixis->dclk[2]));
debug("ddrclk val = %lu\n", val);
return val;
}
{
u8 i;
ulong val = 0;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- i = in_8(pixis_base + PIXIS_SPD);
+ i = in_8(&pixis->spd);
i &= 0x07;
switch (i) {
{
u8 i;
ulong val = 0;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
- i = in_8(pixis_base + PIXIS_SPD);
+ i = in_8(&pixis->spd);
i &= 0x38;
i >>= 3;
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004-2008
+# Matrix-Vision GmbH, info@matrix-vision.de
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o fpga.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+ @mkimage -T script -C none -n mvSMR_Script -d bootscript bootscript.img
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
--- /dev/null
+echo
+echo "==== running autoscript ===="
+echo
+setenv boot24 'bootm ${kernel_boot} ${mv_initrd_addr_ram}'
+setenv ramkernel 'setenv kernel_boot ${loadaddr}'
+setenv flashkernel 'setenv kernel_boot ${mv_kernel_addr}'
+setenv cpird 'cp ${mv_initrd_addr} ${mv_initrd_addr_ram} ${mv_initrd_length}'
+setenv bootfromflash run flashkernel cpird addcons boot24
+setenv bootfromnet 'tftp ${mv_initrd_addr_ram} ${initrd_name};run ramkernel'
+if test ${console} = yes;
+then
+setenv addcons 'setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8'
+else
+setenv addcons 'setenv bootargs ${bootargs} console=tty0'
+fi
+setenv set_static_ip 'setenv ipaddr ${static_ipaddr}'
+setenv set_static_nm 'setenv netmask ${static_netmask}'
+setenv set_static_gw 'setenv gatewayip ${static_gateway}'
+setenv set_ip 'setenv ip ${ipaddr}::${gatewayip}:${netmask}'
+if test ${servicemode} != yes;
+then
+ echo "=== forced flash mode ==="
+ run set_static_ip set_static_nm set_static_gw set_ip bootfromflash
+fi
+if test ${autoscript_boot} != no;
+then
+ if test ${netboot} = yes;
+ then
+ bootp
+ if test $? = 0;
+ then
+ echo "=== bootp succeeded -> netboot ==="
+ run set_ip bootfromnet addcons boot24
+ else
+ echo "=== netboot failed ==="
+ fi
+ fi
+ echo "=== bootfromflash ==="
+ run set_static_ip set_static_nm set_static_gw set_ip bootfromflash
+else
+ echo "=== boot stopped with autoscript_boot no ==="
+fi
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFF800000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+LDSCRIPT := $(SRCTREE)/board/matrix_vision/mvsmr/u-boot.lds
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * (C) Copyright 2010
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <spartan3.h>
+#include <command.h>
+#include <asm/io.h>
+#include "fpga.h"
+#include "mvsmr.h"
+
+Xilinx_Spartan3_Slave_Serial_fns fpga_fns = {
+ fpga_pre_config_fn,
+ fpga_pgm_fn,
+ fpga_clk_fn,
+ fpga_init_fn,
+ fpga_done_fn,
+ fpga_wr_fn,
+ 0
+};
+
+Xilinx_desc spartan3 = {
+ Xilinx_Spartan2,
+ slave_serial,
+ XILINX_XC3S200_SIZE,
+ (void *) &fpga_fns,
+ 0,
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int mvsmr_init_fpga(void)
+{
+ fpga_init();
+ fpga_add(fpga_xilinx, &spartan3);
+
+ return 1;
+}
+
+int fpga_init_fn(int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ if (in_be32(&gpio->simple_ival) & FPGA_CONFIG)
+ return 0;
+
+ return 1;
+}
+
+int fpga_done_fn(int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+ int result = 0;
+
+ udelay(10);
+ if (in_be32(&gpio->simple_ival) & FPGA_DONE)
+ result = 1;
+
+ return result;
+}
+
+int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ if (!assert)
+ setbits_8(&gpio->sint_dvo, FPGA_STATUS);
+ else
+ clrbits_8(&gpio->sint_dvo, FPGA_STATUS);
+
+ return assert;
+}
+
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ if (assert_clk)
+ setbits_be32(&gpio->simple_dvo, FPGA_CCLK);
+ else
+ clrbits_be32(&gpio->simple_dvo, FPGA_CCLK);
+
+ return assert_clk;
+}
+
+int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ if (assert_write)
+ setbits_be32(&gpio->simple_dvo, FPGA_DIN);
+ else
+ clrbits_be32(&gpio->simple_dvo, FPGA_DIN);
+
+ return assert_write;
+}
+
+int fpga_pre_config_fn(int cookie)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ setbits_8(&gpio->sint_dvo, FPGA_STATUS);
+
+ return 0;
+}
/*
- * Copyright 2006 Freescale Semiconductor
+ * (C) Copyright 2008
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
*
* See file CREDITS for list of people who contributed to this
* project.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
+ *
*/
-extern void pixis_reset(void);
-extern int set_px_sysclk(ulong sysclk);
-extern int set_px_mpxpll(ulong mpxpll);
-extern int set_px_corepll(ulong corepll);
-extern void read_from_px_regs(int set);
-extern void read_from_px_regs_altbank(int set);
-extern void set_altbank(void);
-extern void set_px_go(void);
-extern void set_px_go_with_watchdog(void);
+extern int mvsmr_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_init_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn(int assert_write, int flush, int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_pre_config_fn(int cookie);
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2005-2010
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <malloc.h>
+#include <pci.h>
+#include <i2c.h>
+#include <fpga.h>
+#include <environment.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include "fpga.h"
+#include "mvsmr.h"
+#include "../common/mv_common.h"
+
+#define SDRAM_DDR 1
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x715f0f00
+#define SDRAM_CONFIG1 0xd3722930
+#define SDRAM_CONFIG2 0x46770000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void sdram_start(int hi_addr)
+{
+ long hi_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 |
+ hi_bit);
+
+ /* precharge all banks */
+ out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 |
+ hi_bit);
+
+ /* set mode register: extended mode */
+ out_be32((u32 *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE);
+
+ /* set mode register: reset DLL */
+ out_be32((u32 *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000);
+
+ /* precharge all banks */
+ out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 |
+ hi_bit);
+
+ /* auto refresh */
+ out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 |
+ hi_bit);
+
+ /* set mode register */
+ out_be32((u32 *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
+
+ /* normal operation */
+ out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit);
+}
+
+phys_addr_t initdram(int board_type)
+{
+ ulong dramsize = 0;
+ ulong test1,
+ test2;
+
+ /* setup SDRAM chip selects */
+ out_be32((u32 *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e);
+
+ /* setup config registers */
+ out_be32((u32 *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
+ out_be32((u32 *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else
+ dramsize = test2;
+
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ if (dramsize > 0)
+ out_be32((u32 *)MPC5XXX_SDRAM_CS0CFG, 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1);
+ else
+ out_be32((u32 *)MPC5XXX_SDRAM_CS0CFG, 0);
+
+ return dramsize;
+}
+
+void mvsmr_init_gpio(void)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+ struct mpc5xxx_wu_gpio *wu_gpio =
+ (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
+ struct mpc5xxx_gpt_0_7 *timers = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+ printf("Ports : 0x%08x\n", gpio->port_config);
+ printf("PORCFG: 0x%08x\n", in_be32((unsigned *)MPC5XXX_CDM_PORCFG));
+
+ out_be32(&gpio->simple_ddr, SIMPLE_DDR);
+ out_be32(&gpio->simple_dvo, SIMPLE_DVO);
+ out_be32(&gpio->simple_ode, SIMPLE_ODE);
+ out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN);
+
+ out_8(&gpio->sint_ode, SINT_ODE);
+ out_8(&gpio->sint_ddr, SINT_DDR);
+ out_8(&gpio->sint_dvo, SINT_DVO);
+ out_8(&gpio->sint_inten, SINT_INTEN);
+ out_be16(&gpio->sint_itype, SINT_ITYPE);
+ out_8(&gpio->sint_gpioe, SINT_GPIOEN);
+
+ out_8(&wu_gpio->ode, WKUP_ODE);
+ out_8(&wu_gpio->ddr, WKUP_DIR);
+ out_8(&wu_gpio->dvo, WKUP_DO);
+ out_8(&wu_gpio->enable, WKUP_EN);
+
+ out_be32(&timers->gpt0.emsr, 0x00000234); /* OD output high */
+ out_be32(&timers->gpt1.emsr, 0x00000234);
+ out_be32(&timers->gpt2.emsr, 0x00000234);
+ out_be32(&timers->gpt3.emsr, 0x00000234);
+ out_be32(&timers->gpt4.emsr, 0x00000234);
+ out_be32(&timers->gpt5.emsr, 0x00000234);
+ out_be32(&timers->gpt6.emsr, 0x00000024); /* push-pull output low */
+ out_be32(&timers->gpt7.emsr, 0x00000024);
+}
+
+int misc_init_r(void)
+{
+ char *s = getenv("reset_env");
+
+ if (s) {
+ printf(" === FACTORY RESET ===\n");
+ mv_reset_environment();
+ saveenv();
+ }
+
+ return -1;
+}
+
+void mvsmr_get_dbg_present(void)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+ struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
+
+ if (in_be32(&gpio->simple_ival) & COP_PRESENT) {
+ setenv("dbg_present", "no\0");
+ setenv("bootstopkey", "abcdefghijklmnopqrstuvwxyz\0");
+ } else {
+ setenv("dbg_present", "yes\0");
+ setenv("bootstopkey", "s\0");
+ setbits_8(&psc->command, PSC_RX_ENABLE);
+ }
+}
+
+void mvsmr_get_service_mode(void)
+{
+ struct mpc5xxx_wu_gpio *wu_gpio =
+ (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
+
+ if (in_8(&wu_gpio->ival) & SERVICE_MODE)
+ setenv("servicemode", "no\0");
+ else
+ setenv("servicemode", "yes\0");
+}
+
+int mvsmr_get_mac(void)
+{
+ unsigned char mac[6];
+ struct mpc5xxx_wu_gpio *wu_gpio =
+ (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
+
+ if (in_8(&wu_gpio->ival) & LAN_PRSNT) {
+ setenv("lan_present", "no\0");
+ return -1;
+ } else
+ setenv("lan_present", "yes\0");
+
+ i2c_read(0x50, 0, 1, mac, 6);
+
+ eth_setenv_enetaddr("ethaddr", mac);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ mvsmr_init_gpio();
+ printf("Board: Matrix Vision mvSMR\n");
+
+ return 0;
+}
+
+void flash_preinit(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write
+ * access for detection process.
+ * Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+ clrbits_be32((u32 *)MPC5XXX_BOOTCS_CFG, 0x1);
+}
+
+void flash_afterinit(ulong size)
+{
+ out_be32((u32 *)MPC5XXX_BOOTCS_START,
+ START_REG(CONFIG_SYS_BOOTCS_START | size));
+ out_be32((u32 *)MPC5XXX_CS0_START,
+ START_REG(CONFIG_SYS_BOOTCS_START | size));
+ out_be32((u32 *)MPC5XXX_BOOTCS_STOP,
+ STOP_REG(CONFIG_SYS_BOOTCS_START | size, size));
+ out_be32((u32 *)MPC5XXX_CS0_STOP,
+ STOP_REG(CONFIG_SYS_BOOTCS_START | size, size));
+}
+
+struct pci_controller hose;
+
+void pci_init_board(void)
+{
+ mvsmr_get_dbg_present();
+ mvsmr_get_service_mode();
+ mvsmr_init_fpga();
+ mv_load_fpga();
+ pci_mpc5xxx_init(&hose);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ if (!mvsmr_get_mac())
+ return cpu_eth_init(bis);
+
+ return pci_eth_init(bis);
+}
--- /dev/null
+#include <pci.h>
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+#define FPGA_DIN MPC5XXX_GPIO_SIMPLE_PSC3_0
+#define FPGA_CCLK MPC5XXX_GPIO_SIMPLE_PSC3_1
+#define FPGA_DONE MPC5XXX_GPIO_SIMPLE_PSC3_2
+#define FPGA_CONFIG MPC5XXX_GPIO_SIMPLE_PSC3_3
+#define FPGA_STATUS MPC5XXX_GPIO_SINT_PSC3_4
+#define S_FPGA_DIN MPC5XXX_GPIO_SINT_PSC3_5
+#define S_FPGA_CCLK MPC5XXX_GPIO_SIMPLE_PSC3_6
+#define S_FPGA_DONE MPC5XXX_GPIO_SIMPLE_PSC3_7
+#define S_FPGA_CONFIG MPC5XXX_GPIO_SINT_PSC3_8
+#define S_FPGA_STATUS MPC5XXX_GPIO_WKUP_PSC3_9
+
+#define MAN_RST MPC5XXX_GPIO_WKUP_PSC6_0
+#define WD_TS MPC5XXX_GPIO_WKUP_PSC6_1
+#define WD_WDI MPC5XXX_GPIO_SIMPLE_PSC6_2
+#define COP_PRESENT MPC5XXX_GPIO_SIMPLE_PSC6_3
+#define SERVICE_MODE MPC5XXX_GPIO_WKUP_6
+#define FLASH_RBY MPC5XXX_GPIO_WKUP_7
+#define UART_EN1 MPC5XXX_GPIO_WKUP_PSC1_4
+#define LAN_PRSNT MPC5XXX_GPIO_WKUP_PSC2_4
+
+#define SIMPLE_DDR (FPGA_DIN | FPGA_CCLK | FPGA_CONFIG | WD_WDI |\
+ S_FPGA_CCLK)
+#define SIMPLE_DVO (FPGA_CONFIG)
+#define SIMPLE_ODE (FPGA_CONFIG)
+#define SIMPLE_GPIOEN (FPGA_DIN | FPGA_CCLK | FPGA_DONE | FPGA_CONFIG |\
+ S_FPGA_CCLK | S_FPGA_DONE | WD_WDI | COP_PRESENT)
+
+#define SINT_ODE 0x1
+#define SINT_DDR 0x3
+#define SINT_DVO 0x1
+#define SINT_INTEN 0
+#define SINT_ITYPE 0
+#define SINT_GPIOEN (FPGA_STATUS | S_FPGA_DIN | S_FPGA_CONFIG)
+
+#define WKUP_ODE (MAN_RST | S_FPGA_STATUS)
+#define WKUP_DIR (MAN_RST | WD_TS | S_FPGA_STATUS)
+#define WKUP_DO (MAN_RST | WD_TS | S_FPGA_STATUS)
+#define WKUP_EN (MAN_RST | WD_TS | S_FPGA_STATUS | SERVICE_MODE |\
+ FLASH_RBY | UART_EN1 | LAN_PRSNT)
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2010
+ * André Schwarz, Matrix Vision GmbH, as@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the first two sectors (=8KB) of our S29GL flash chip */
+ cpu/mpc5xxx/start.o (.text)
+ cpu/mpc5xxx/traps.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/cache.o (.text)
+ lib_ppc/time.o (.text)
+
+ /* This is only needed to force failure if size of above code will ever */
+ /* increase and grow into reserved space. */
+ . = ALIGN(0x2000); /* location counter has to be 0x4000 now */
+ . += 0x4000; /* ->0x8000, i.e. move to env_offset */
+
+ . = env_offset; /* ld error as soon as above ALIGN misplaces lc */
+ common/env_embedded.o (.ppcenv)
+
+ *(.text)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (unsigned char *) info->start[sect];
- writeb (addr, 0xaa);
- writeb (addr, 0x55);
- writeb (addr, 0x80);
- writeb (addr, 0xaa);
- writeb (addr, 0x55);
- writeb (addr2, 0x30);
+ writeb (0xaa, addr);
+ writeb (0x55, addr);
+ writeb (0x80, addr);
+ writeb (0xaa, addr);
+ writeb (0x55, addr);
+ writeb (0x30, addr2);
/* Now just wait for 0xff & provide some user
* feedback while we wait.
*/
return (2);
}
- writeb (cmd, 0xaa);
- writeb (cmd, 0x55);
- writeb (cmd, 0xa0);
+ writeb (0xaa, cmd);
+ writeb (0x55, cmd);
+ writeb (0xa0, cmd);
writeb (dst, b);
/* Verify write */
val &= ~mask;
else
val |= mask;
- writel (&pio->data, val);
+ writel (val, &pio->data);
}
void __led_set (led_id_t mask, int state)
val &= ~mask;
else
val |= mask;
- writel (&pio->data, val);
+ writel (val, &pio->data);
}
void __led_toggle (led_id_t mask)
nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR;
val ^= mask;
- writel (&pio->data, val);
+ writel (val, &pio->data);
}
*/
#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/smc.h>
+#include <asm/arch/gpio.h>
+#include <netdev.h>
+
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+static void smc9115_pre_init(void)
+{
+ u32 smc_bw_conf, smc_bc_conf;
+
+ struct s5pc100_gpio *const gpio =
+ (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+ /* gpio configuration GPK0CON */
+ gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+
+ /* Ethernet needs bus width of 16 bits */
+ smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
+ smc_bc_conf = SMC_BC_TACS(0x0) | SMC_BC_TCOS(0x4) | SMC_BC_TACC(0xe)
+ | SMC_BC_TCOH(0x1) | SMC_BC_TAH(0x4)
+ | SMC_BC_TACP(0x6) | SMC_BC_PMC(0x0);
+
+ /* Select and configure the SROMC bank */
+ s5pc1xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
+}
+
int board_init(void)
{
+ smc9115_pre_init();
+
gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
}
#endif
+static int do_bmp_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong addr;
-/*
- * Subroutine: do_bmp
- *
- * Description: Handler for 'bmp' command..
- *
- * Inputs: argv[1] contains the subcommand
- *
- * Return: None
- *
- */
-int do_bmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+ switch (argc) {
+ case 1: /* use load_addr as default address */
+ addr = load_addr;
+ break;
+ case 2: /* use argument */
+ addr = simple_strtoul(argv[1], NULL, 16);
+ break;
+ default:
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ return (bmp_info(addr));
+}
+
+static int do_bmp_display(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
ulong addr;
int x = 0, y = 0;
switch (argc) {
- case 2: /* use load_addr as default address */
+ case 1: /* use load_addr as default address */
addr = load_addr;
break;
- case 3: /* use argument */
- addr = simple_strtoul(argv[2], NULL, 16);
+ case 2: /* use argument */
+ addr = simple_strtoul(argv[1], NULL, 16);
break;
- case 5:
- addr = simple_strtoul(argv[2], NULL, 16);
- x = simple_strtoul(argv[3], NULL, 10);
- y = simple_strtoul(argv[4], NULL, 10);
+ case 4:
+ addr = simple_strtoul(argv[1], NULL, 16);
+ x = simple_strtoul(argv[2], NULL, 10);
+ y = simple_strtoul(argv[3], NULL, 10);
break;
default:
cmd_usage(cmdtp);
return 1;
}
- /* Allow for short names
- * Adjust length if more sub-commands get added
- */
- if (strncmp(argv[1],"info",1) == 0) {
- return (bmp_info(addr));
- } else if (strncmp(argv[1],"display",1) == 0) {
- return (bmp_display(addr, x, y));
+ return (bmp_display(addr, x, y));
+}
+
+static cmd_tbl_t cmd_bmp_sub[] = {
+ U_BOOT_CMD_MKENT(info, 3, 0, do_bmp_info, "", ""),
+ U_BOOT_CMD_MKENT(display, 5, 0, do_bmp_display, "", ""),
+};
+
+/*
+ * Subroutine: do_bmp
+ *
+ * Description: Handler for 'bmp' command..
+ *
+ * Inputs: argv[1] contains the subcommand
+ *
+ * Return: None
+ *
+ */
+static int do_bmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ cmd_tbl_t *c;
+
+ /* Strip off leading 'bmp' command argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], &cmd_bmp_sub[0], ARRAY_SIZE(cmd_bmp_sub));
+
+ if (c) {
+ return c->cmd(cmdtp, flag, argc, argv);
} else {
cmd_usage(cmdtp);
return 1;
{
int i, err, reserved_pebs;
int found = 0, vol_id = 0;
- struct ubi_volume *vol;
+ struct ubi_volume *vol = NULL;
for (i = 0; i < ubi->vtbl_slots; i++) {
vol = ubi->volumes[i];
dev = simple_strtoul(boot_device, &ep, 16);
stor_dev = usb_stor_get_dev(dev);
- if (stor_dev->type == DEV_TYPE_UNKNOWN) {
+ if (stor_dev == NULL || stor_dev->type == DEV_TYPE_UNKNOWN) {
printf("\n** Device %d not available\n", dev);
return 1;
}
if (strncmp(argv[1], "part", 4) == 0) {
int devno, ok = 0;
if (argc == 2) {
- for (devno = 0; devno < USB_MAX_STOR_DEV; ++devno) {
+ for (devno = 0; ; ++devno) {
stor_dev = usb_stor_get_dev(devno);
+ if (stor_dev == NULL)
+ break;
if (stor_dev->type != DEV_TYPE_UNKNOWN) {
ok++;
if (devno)
} else {
devno = simple_strtoul(argv[2], NULL, 16);
stor_dev = usb_stor_get_dev(devno);
- if (stor_dev->type != DEV_TYPE_UNKNOWN) {
+ if (stor_dev != NULL &&
+ stor_dev->type != DEV_TYPE_UNKNOWN) {
ok++;
debug("print_part of %x\n", devno);
print_part(stor_dev);
if (argc == 3) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf("\nUSB device %d: ", dev);
- if (dev >= USB_MAX_STOR_DEV) {
+ stor_dev = usb_stor_get_dev(dev);
+ if (stor_dev == NULL) {
printf("unknown device\n");
return 1;
}
printf("\n Device %d: ", dev);
- stor_dev = usb_stor_get_dev(dev);
dev_print(stor_dev);
if (stor_dev->type == DEV_TYPE_UNKNOWN)
return 1;
ulong new = old + increment;
if ((new < mem_malloc_start) || (new > mem_malloc_end))
- return NULL;
+ return (void *)MORECORE_FAILURE;
mem_malloc_brk = new;
}
}
#endif
+
+void fdt_del_node_and_alias(void *blob, const char *alias)
+{
+ int off = fdt_path_offset(blob, alias);
+
+ if (off < 0)
+ return;
+
+ fdt_del_node(blob, off);
+
+ off = fdt_path_offset(blob, "/aliases");
+ fdt_delprop(blob, off, alias);
+}
while (!tstc()) { /* while no incoming data */
if (retry_time >= 0 && get_ticks() > endtime)
return (-2); /* timed out */
+ WATCHDOG_RESET();
}
#endif
while (!tstc()) { /* while no incoming data */
if (retry_time >= 0 && get_ticks() > endtime)
return (-2); /* timed out */
+ WATCHDOG_RESET();
}
#endif
WATCHDOG_RESET(); /* Trigger watchdog, if needed */
while (!tstc()) {
extern void show_activity(int arg);
show_activity(0);
+ WATCHDOG_RESET();
}
#endif
c = getc();
block_dev_desc_t *usb_stor_get_dev(int index)
{
- return (index < USB_MAX_STOR_DEV) ? &usb_dev_desc[index] : NULL;
+ return (index < usb_max_devs) ? &usb_dev_desc[index] : NULL;
}
* get info and fill it in
*/
if (usb_stor_get_info(dev, &usb_stor[usb_max_devs],
- &usb_dev_desc[usb_max_devs]))
+ &usb_dev_desc[usb_max_devs]) == 1)
usb_max_devs++;
}
/* if storage device */
USB_STOR_PRINTF("inquiry returns %d\n", i);
if (i == 0)
break;
- } while (retry--);
+ } while (--retry);
if (!retry) {
printf("error in inquiry\n");
#include <common.h>
#include <command.h>
+#ifdef CONFIG_S3C64XX
#include <asm/arch/s3c6400.h>
+#endif
#include <asm/system.h>
static void cache_flush (void);
#ifdef CONFIG_ENABLE_MMU
#include <asm/proc/domain.h>
#endif
+#ifdef CONFIG_S3C64XX
#include <asm/arch/s3c6400.h>
+#endif
#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
#endif
mmu_disable_phys:
+#ifdef CONFIG_S3C64XX
/* Peri port setup */
ldr r0, =0x70000000
orr r0, r0, #0x13
mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff)
+#endif
/*
* Go setup Memory and board specific bits prior to relocation.
/*
* Cirrus Logic EP93xx timer support.
*
- * Copyright (C) 2009, 2010
- * Matthias Kaehlcke <matthias@kaehlcke.net>
+ * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
*
* Copyright (C) 2004, 2005
* Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
static struct ep93xx_timer
{
unsigned long long ticks;
- unsigned long last_update;
+ unsigned long last_read;
} timer;
-static inline unsigned long clk_to_systicks(unsigned long long clk_ticks)
-{
- unsigned long long sys_ticks = (clk_ticks * CONFIG_SYS_HZ);
- do_div(sys_ticks, TIMER_FREQ);
-
- return (unsigned long)sys_ticks;
-}
-
static inline unsigned long long usecs_to_ticks(unsigned long usecs)
{
unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ;
return ticks;
}
-static inline unsigned long read_timer(void)
+static inline void read_timer(void)
{
- struct timer_regs *timer = (struct timer_regs *)TIMER_BASE;
+ struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
+ const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value);
+
+ if (now >= timer.last_read)
+ timer.ticks += now - timer.last_read;
+ else
+ /* an overflow occurred */
+ timer.ticks += TIMER_MAX_VAL - timer.last_read + now;
- return TIMER_MAX_VAL - readl(&timer->timer3.value);
+ timer.last_read = now;
}
/*
*/
unsigned long long get_ticks(void)
{
- const unsigned long now = read_timer();
+ unsigned long long sys_ticks;
- if (now >= timer.last_update)
- timer.ticks += now - timer.last_update;
- else
- /* an overflow occurred */
- timer.ticks += TIMER_MAX_VAL - timer.last_update + now;
+ read_timer();
- timer.last_update = now;
+ sys_ticks = timer.ticks * CONFIG_SYS_HZ;
+ do_div(sys_ticks, TIMER_FREQ);
- return clk_to_systicks(timer.ticks);
+ return sys_ticks;
}
unsigned long get_timer_masked(void)
void reset_timer_masked(void)
{
- timer.last_update = read_timer();
+ read_timer();
timer.ticks = 0;
}
void __udelay(unsigned long usec)
{
- /* read the timer and update timer.ticks */
- get_ticks();
+ unsigned long long target;
+
+ read_timer();
- const unsigned long long target = timer.ticks + usecs_to_ticks(usec);
+ target = timer.ticks + usecs_to_ticks(usec);
while (timer.ticks < target)
- get_ticks();
+ read_timer();
}
int timer_init(void)
{
- struct timer_regs *timer = (struct timer_regs *)TIMER_BASE;
+ struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
- /* use timer 3 with 508KHz and free running */
- writel(TIMER_CLKSEL, &timer->timer3.control);
+ /* use timer 3 with 508KHz and free running, not enabled now */
+ writel(TIMER_CLKSEL, &timer_regs->timer3.control);
- /* set initial timer value 3 */
- writel(TIMER_MAX_VAL, &timer->timer3.load);
+ /* set initial timer value */
+ writel(TIMER_MAX_VAL, &timer_regs->timer3.load);
/* Enable the timer */
writel(TIMER_ENABLE | TIMER_CLKSEL,
- &timer->timer3.control);
+ &timer_regs->timer3.control);
reset_timer_masked();
if (mckr & AT91_PMC_MCKR_MDIV_MASK)
freq /= 2; /* processor clock division */
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
- mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == AT91SAM9_PMC_MDIV_3
+ mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
+ (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
? freq / 3
: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
#else
#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ)
#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ)
-/* macro to read the 32 bit timer: since it decrements, we invert read value */
-#define READ_TIMER() (~readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0)))
+/* macro to read the decrementing 32 bit timer as an increasing count */
+#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0)))
/* Configure a free-running, auto-wrap counter with no prescaler */
int timer_init(void)
/* Restart counting from 0 */
void reset_timer(void)
{
- writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0)); /* Immediate effect */
+ ulong val;
+ writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0));
+ /*
+ * The load-register isn't really immediate: it changes on clock
+ * edges, so we must wait for our newly-written value to appear.
+ * Since we might miss reading 0, wait for any change in value.
+ */
+ val = READ_TIMER();
+ while (READ_TIMER() == val)
+ ;
}
/* Return how many HZ passed since "base" */
COBJS += clock.o
COBJS += cpu_info.o
+COBJS += gpio.o
+COBJS += sromc.o
COBJS += timer.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
-
-#define APLL 0
-#define MPLL 1
-#define EPLL 2
-#define HPLL 3
-#define VPLL 4
+#include <asm/arch/clk.h>
#define CLK_M 0
#define CLK_D 1
--- /dev/null
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+#define CON_MASK(x) (0xf << ((x) << 2))
+#define CON_SFR(x, v) ((v) << ((x) << 2))
+
+#define DAT_MASK(x) (0x1 << (x))
+#define DAT_SET(x) (0x1 << (x))
+
+#define PULL_MASK(x) (0x3 << ((x) << 1))
+#define PULL_MODE(x, v) ((v) << ((x) << 1))
+
+#define DRV_MASK(x) (0x3 << ((x) << 1))
+#define DRV_SET(x, m) ((m) << ((x) << 1))
+#define RATE_MASK(x) (0x1 << (x + 16))
+#define RATE_SET(x) (0x1 << (x + 16))
+
+void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg)
+{
+ unsigned int value;
+
+ value = readl(&bank->con);
+ value &= ~CON_MASK(gpio);
+ value |= CON_SFR(gpio, cfg);
+ writel(value, &bank->con);
+}
+
+void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
+{
+ unsigned int value;
+
+ gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
+
+ value = readl(&bank->dat);
+ value &= ~DAT_MASK(gpio);
+ if (en)
+ value |= DAT_SET(gpio);
+ writel(value, &bank->dat);
+}
+
+void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio)
+{
+ gpio_cfg_pin(bank, gpio, GPIO_INPUT);
+}
+
+void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
+{
+ unsigned int value;
+
+ value = readl(&bank->dat);
+ value &= ~DAT_MASK(gpio);
+ if (en)
+ value |= DAT_SET(gpio);
+ writel(value, &bank->dat);
+}
+
+unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio)
+{
+ unsigned int value;
+
+ value = readl(&bank->dat);
+ return !!(value & DAT_MASK(gpio));
+}
+
+void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+{
+ unsigned int value;
+
+ value = readl(&bank->pull);
+ value &= ~PULL_MASK(gpio);
+
+ switch (mode) {
+ case GPIO_PULL_DOWN:
+ case GPIO_PULL_UP:
+ value |= PULL_MODE(gpio, mode);
+ break;
+ default:
+ return;
+ }
+
+ writel(value, &bank->pull);
+}
+
+void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+{
+ unsigned int value;
+
+ value = readl(&bank->drv);
+ value &= ~DRV_MASK(gpio);
+
+ switch (mode) {
+ case GPIO_DRV_1X:
+ case GPIO_DRV_2X:
+ case GPIO_DRV_3X:
+ case GPIO_DRV_4X:
+ value |= DRV_SET(gpio, mode);
+ break;
+ default:
+ return;
+ }
+
+ writel(value, &bank->drv);
+}
+
+void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+{
+ unsigned int value;
+
+ value = readl(&bank->drv);
+ value &= ~RATE_MASK(gpio);
+
+ switch (mode) {
+ case GPIO_DRV_FAST:
+ case GPIO_DRV_SLOW:
+ value |= RATE_SET(gpio);
+ break;
+ default:
+ return;
+ }
+
+ writel(value, &bank->drv);
+}
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/smc.h>
+
+/*
+ * s5pc1xx_config_sromc() - select the proper SROMC Bank and configure the
+ * band width control and bank control registers
+ * srom_bank - SROM Bank 0 to 5
+ * smc_bw_conf - SMC Band witdh reg configuration value
+ * smc_bc_conf - SMC Bank Control reg configuration value
+ */
+void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf)
+{
+ u32 tmp;
+ struct s5pc1xx_smc *srom;
+
+ if (cpu_is_s5pc100())
+ srom = (struct s5pc1xx_smc *)S5PC100_SROMC_BASE;
+ else
+ srom = (struct s5pc1xx_smc *)S5PC110_SROMC_BASE;
+
+ /* Configure SMC_BW register to handle proper SROMC bank */
+ tmp = srom->bw;
+ tmp &= ~(0xF << (srom_bank * 4));
+ tmp |= smc_bw_conf;
+ srom->bw = tmp;
+
+ /* Configure SMC_BC register */
+ srom->bc[srom_bank] = smc_bc_conf;
+}
#include <command.h>
#include <asm/io.h>
-#include "../../board/freescale/common/pixis.h"
#include "../../board/freescale/common/fsl_diu_fb.h"
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
COBJS-$(CONFIG_P1011) += ddr-gen3.o
+COBJS-$(CONFIG_P1012) += ddr-gen3.o
+COBJS-$(CONFIG_P1013) += ddr-gen3.o
COBJS-$(CONFIG_P1020) += ddr-gen3.o
+COBJS-$(CONFIG_P1021) += ddr-gen3.o
+COBJS-$(CONFIG_P1022) += ddr-gen3.o
COBJS-$(CONFIG_P2010) += ddr-gen3.o
COBJS-$(CONFIG_P2020) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
* Kumar Gala <kumar.gala@freescale.com>
*
* See file CREDITS for list of people who contributed to this
#ifndef CONFIG_E500MC
li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
+ mfspr r0,PVR
+ andi. r0,r0,0xff
+ cmpwi r0,0x50@l /* if we are rev 5.0 or greater set MBDD */
+ blt 1f
+ /* Set MBDD bit also */
+ ori r3, r3, HID1_MBDD@l
+1:
mtspr SPRN_HID1,r3
#endif
/* Enable branch prediction */
- li r3,0x201
+ lis r3,BUCSR_ENABLE@h
+ ori r3,r3,BUCSR_ENABLE@l
mtspr SPRN_BUCSR,r3
/* Ensure TB is 0 */
/*
- * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc.
* Copyright (C) 2003 Motorola,Inc.
*
* See file CREDITS for list of people who contributed to this
#ifndef CONFIG_E500MC
li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
+ mfspr r3,PVR
+ andi. r3,r3, 0xff
+ cmpwi r3,0x50@l /* if we are rev 5.0 or greater set MBDD */
+ blt 1f
+ /* Set MBDD bit also */
+ ori r0, r0, HID1_MBDD@l
+1:
mtspr HID1,r0
#endif
/* Enable Branch Prediction */
#if defined(CONFIG_BTB)
- li r0,0x201 /* BBFI = 1, BPEN = 1 */
- mtspr BUCSR,r0
+ lis r0,BUCSR_ENABLE@h
+ ori r0,r0,BUCSR_ENABLE@l
+ mtspr SPRN_BUCSR,r0
#endif
#if defined(CONFIG_SYS_INIT_DBCR)
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* This file is derived from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c.
* Basically this file contains cpu specific common code for 85xx/86xx
CPU_TYPE_ENTRY(8572, 8572_E, 2),
CPU_TYPE_ENTRY(P1011, P1011, 1),
CPU_TYPE_ENTRY(P1011, P1011_E, 1),
+ CPU_TYPE_ENTRY(P1012, P1012, 1),
+ CPU_TYPE_ENTRY(P1012, P1012_E, 1),
+ CPU_TYPE_ENTRY(P1013, P1013, 1),
+ CPU_TYPE_ENTRY(P1013, P1013_E, 1),
CPU_TYPE_ENTRY(P1020, P1020, 2),
CPU_TYPE_ENTRY(P1020, P1020_E, 2),
+ CPU_TYPE_ENTRY(P1021, P1021, 2),
+ CPU_TYPE_ENTRY(P1021, P1021_E, 2),
+ CPU_TYPE_ENTRY(P1022, P1022, 2),
+ CPU_TYPE_ENTRY(P1022, P1022_E, 2),
CPU_TYPE_ENTRY(P2010, P2010, 1),
CPU_TYPE_ENTRY(P2010, P2010_E, 1),
CPU_TYPE_ENTRY(P2020, P2020, 2),
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
*/
/*
}
/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
-static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr)
+static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
{
unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
#if defined(CONFIG_FSL_DDR3)
- /* We need set BL/2 + 4 for BC4 or OTF */
- rrt = 4; /* BL/2 + 4 clocks */
- wwt = 4; /* BL/2 + 4 clocks */
+ if (popts->burst_length == DDR_BL8) {
+ /* We set BL/2 for fixed BL8 */
+ rrt = 0; /* BL/2 clocks */
+ wwt = 0; /* BL/2 clocks */
+ } else {
+ /* We need to set BL/2 + 2 to BC4 and OTF */
+ rrt = 2; /* BL/2 + 2 clocks */
+ wwt = 2; /* BL/2 + 2 clocks */
+ }
dll_lock = 1; /* tDLLK = 512 clocks from spec */
#endif
ddr->timing_cfg_4 = (0
set_ddr_sdram_clk_cntl(ddr, popts);
set_ddr_init_addr(ddr);
set_ddr_init_ext_addr(ddr);
- set_timing_cfg_4(ddr);
+ set_timing_cfg_4(ddr, popts);
set_timing_cfg_5(ddr);
set_ddr_zq_cntl(ddr, zq_en);
/*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008, 2010 Freescale Semiconductor, Inc.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
*/
#include <common.h>
/* Choose burst length. */
#if defined(CONFIG_FSL_DDR3)
+#if defined(CONFIG_E500MC)
+ popts->OTF_burst_chop_en = 0; /* on-the-fly burst chop disable */
+ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
+#else
popts->OTF_burst_chop_en = 1; /* on-the-fly burst chop */
popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
+#endif
#else
popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
#endif
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#include <pci.h>
struct pci_info {
- u16 cfg;
+ u32 cfg;
};
/* The cfg field is a bit mask in which each bit represents the value of
(1 << 7) | (1 << 0xe) | (1 << 0xf),
},
};
-#elif defined(CONFIG_P1011) || defined(CONFIG_P1020)
+#elif defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
+ defined(CONFIG_P1012) || defined(CONFIG_P1021)
static struct pci_info pci_config_info[] =
{
[LAW_TRGT_IF_PCIE_1] = {
.cfg = (1 << 0xe),
},
};
+#elif defined(CONFIG_P1013) || defined(CONFIG_P1022)
+static struct pci_info pci_config_info[] =
+{
+ [LAW_TRGT_IF_PCIE_1] = {
+ .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xa) |
+ (1 << 0xb) | (1 << 0xd) | (1 << 0xe) |
+ (1 << 0xf) | (1 << 0x15) | (1 << 0x16) |
+ (1 << 0x17) | (1 << 0x18) | (1 << 0x19) |
+ (1 << 0x1a) | (1 << 0x1b) | (1 << 0x1c) |
+ (1 << 0x1d) | (1 << 0x1e) | (1 << 0x1f),
+ },
+ [LAW_TRGT_IF_PCIE_2] = {
+ .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) |
+ (1 << 9) | (1 << 0xa) | (1 << 0xb) | (1 << 0xd) |
+ (1 << 0x15) | (1 << 0x16) | (1 << 0x17) |
+ (1 << 0x18) | (1 << 0x1c),
+ },
+ [LAW_TRGT_IF_PCIE_3] = {
+ .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xd) |
+ (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | (1 << 0x18) |
+ (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b),
+ },
+};
#elif defined(CONFIG_P2010) || defined(CONFIG_P2020)
static struct pci_info pci_config_info[] =
{
START = start.o
SOBJS = exceptions.o
-COBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o
+COBJS = cpu.o interrupts.o sysid.o traps.o epcs.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
if (assert) {
tmp = readl (&epcs->control);
- writel (&epcs->control, tmp | NIOS_SPI_SSO);
+ writel (tmp | NIOS_SPI_SSO, &epcs->control);
} else {
/* Let all bits shift out */
start = get_timer (0);
if (get_timer (start) > EPCS_TIMEOUT)
return (-1);
tmp = readl (&epcs->control);
- writel (&epcs->control, tmp & ~NIOS_SPI_SSO);
+ writel (tmp & ~NIOS_SPI_SSO, &epcs->control);
}
return (0);
}
while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0)
if (get_timer (start) > EPCS_TIMEOUT)
return (-1);
- writel (&epcs->txdata, c);
+ writel (c, &epcs->txdata);
return (0);
}
static struct epcs_devinfo_t devinfo[] = {
{ "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c },
{ "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c },
+ { "EPCS16", 0x14, 21, 32, 16, 8, 0x1c },
+ { "EPCS64", 0x16, 23,128, 16, 8, 0x1c },
{ 0, 0, 0, 0, 0, 0 }
};
}
/* Sector info */
- for (i=0; i<dev->num_sects; i++) {
+ for (i=0; (i < dev->num_sects) && (argc > 1); i++) {
erased = epcs_sect_erased (i, &tmp, dev);
- printf (" %d: %06x ",
+ if ((i & 0x03) == 0) printf ("\n");
+ printf ("%4d: %07x ",
i, i*(1<<dev->sz_sect) );
if (erased)
- printf ("erased\n");
+ printf ("E ");
else
- printf ("data @ 0x%06x\n", tmp);
+ printf (" ");
}
+ printf ("\n");
return;
}
void reset_timer (void)
{
+ nios_timer_t *tmr =(nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
+
+ /* From Embedded Peripherals Handbook:
+ *
+ * "When the hardware is configured with Writeable period
+ * disabled, writing to one of the period_n registers causes
+ * the counter to reset to the fixed Timeout Period specified
+ * at system generation time."
+ *
+ * Here we force a reload to prevent early timeouts from
+ * get_timer() when the interrupt period is greater than
+ * than 1 msec.
+ *
+ * Simply write to periodl with its own value to force an
+ * internal counter reload, THEN reset the timestamp.
+ */
+ writel (readl (&tmr->periodl), &tmr->periodl);
timestamp = 0;
+
+ /* From Embedded Peripherals Handbook:
+ *
+ * "Writing to one of the period_n registers stops the internal
+ * counter, except when the hardware is configured with Start/Stop
+ * control bits off. If Start/Stop control bits is off, writing
+ * either register does not stop the counter."
+ *
+ * In order to accomodate either configuration, the control
+ * register is re-written. If the counter is stopped, it will
+ * be restarted. If it is running, the write is essentially
+ * a nop.
+ */
+ writel (NIOS_TIMER_ITO | NIOS_TIMER_CONT | NIOS_TIMER_START,
+ &tmr->control);
+
}
ulong get_timer (ulong base)
/* Interrupt is cleared by writing anything to the
* status register.
*/
- writel (&tmr->status, 0);
+ writel (0, &tmr->status);
timestamp += CONFIG_SYS_NIOS_TMRMS;
#ifdef CONFIG_STATUS_LED
status_led_tick(timestamp);
{
nios_timer_t *tmr =(nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
- writel (&tmr->status, 0);
- writel (&tmr->control, 0);
- writel (&tmr->control, NIOS_TIMER_STOP);
+ writel (0, &tmr->status);
+ writel (0, &tmr->control);
+ writel (NIOS_TIMER_STOP, &tmr->control);
#if defined(CONFIG_SYS_NIOS_TMRCNT)
- writel (&tmr->periodl, CONFIG_SYS_NIOS_TMRCNT & 0xffff);
- writel (&tmr->periodh, (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff);
+ writel (CONFIG_SYS_NIOS_TMRCNT & 0xffff, &tmr->periodl);
+ writel ((CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff, &tmr->periodh);
#endif
- writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT |
- NIOS_TIMER_START );
+ writel (NIOS_TIMER_ITO | NIOS_TIMER_CONT | NIOS_TIMER_START,
+ &tmr->control);
irq_install_handler (CONFIG_SYS_NIOS_TMRIRQ, tmr_isr, (void *)tmr);
}
COBJS += denali_spd_ddr2.o
COBJS += ecc.o
COBJS += fdt.o
-COBJS += i2c.o
COBJS += interrupts.o
COBJS += iop480_uart.o
ifdef CONFIG_CMD_REGINFO
--- /dev/null
+Matrix Vision mvSMR
+-------------------
+
+1. Board Description
+
+ The mvSMR is a 75x130mm single image processing board used
+ in automation. Power Supply is 24VDC.
+
+2 System Components
+
+2.1 CPU
+ Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
+ 64MB DDR-I @ 133MHz.
+ 8 MByte Nor Flash on local bus.
+ 2 serial ports. Console running on ttyS0 @ 115200 8N1.
+
+2.2 PCI
+ PCI clock fixed at 33MHz due to old'n'slow Xilinx PCI core.
+
+2.3 FPGA
+ Xilinx Spartan-3 XC3S200 with PCI DMA engine.
+ Connects to Matrix Vision specific CCD/CMOS sensor interface.
+
+2.4 I2C
+ EEPROM @ 0xA0 for vendor specifics.
+ image sensor interface (slave adresses depend on sensor)
+
+3 Flash layout.
+
+ reset vector is 0x00000100, i.e. "LOWBOOT".
+
+ FF800000 u-boot
+ FF806000 u-boot script image
+ FF808000 u-boot environment
+ FF840000 FPGA raw bit file
+ FF880000 root FS
+ FFF00000 kernel
+
+4 Booting
+
+ On startup the bootscript @ FF806000 is executed. This script can be
+ exchanged easily. Default boot mode is "boot from flash", i.e. system
+ works stand-alone.
+
+ This behaviour depends on some environment variables :
+
+ "netboot" : yes ->try dhcp/bootp and boot from network.
+ A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
+ DHCP server configuration, e.g. to provide different images to
+ different devices.
+
+ During netboot the system tries to get 3 image files:
+ 1. Kernel - name + data is given during BOOTP.
+ 2. Initrd - name is stored in "initrd_name"
+ Fallback files are the flash versions.
printf("cpu is s5pc110\n");
gpio
- not supported yet.
+
+ struct s5pc100_gpio *gpio = (struct s5pc100_gpio*)S5PC100_GPIO_BASE;
+
+ /* GPA[0] pin set to irq */
+ gpio_cfg_pin(&gpio->gpio_a, 0, GPIO_IRQ);
+
+ /* GPA[0] pin set to input */
+ gpio_direction_input(&gpio->gpio_a, 0);
+
+ /* GPA[0] pin set to output/high */
+ gpio_direction_output(&gpio->gpio_a, 0, 1);
+
+ /* GPA[0] value set to low */
+ gpio_set_value(&gpio->gpio_a, 0, 0);
+
+ /* get GPA[0] value */
+ value = gpio_get_value(&gpio->gpio_a, 0);
Links
=====
****************************************************************************/
void *PCI_mapBIOSImage(pci_dev_t pcidev)
{
- u32 BIOSImagePhys;
+ u32 BIOSImageBus;
int BIOSImageBAR;
u8 *BIOSImage;
specific programming for different cards to solve this problem.
*/
- if ((BIOSImagePhys = PCI_findBIOSAddr(pcidev, &BIOSImageBAR)) == 0) {
+ BIOSImageBus = PCI_findBIOSAddr(pcidev, &BIOSImageBAR);
+ if (BIOSImageBus == 0) {
printf("Find bios addr error\n");
return NULL;
}
- BIOSImage = (u8 *) BIOSImagePhys;
+ BIOSImage = pci_bus_to_virt(pcidev, BIOSImageBus,
+ PCI_REGION_MEM, 0, MAP_NOCACHE);
/*Change the PCI BAR registers to map it onto the bus.*/
pci_write_config_dword(pcidev, BIOSImageBAR, 0);
- pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImagePhys | 0x1);
+ pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
udelay(1);
BE_init(0, 65536, VGAInfo, 0);
/*Post all the display controller BIOS'es*/
- PCI_postController(pcidev, VGAInfo);
+ if (!PCI_postController(pcidev, VGAInfo))
+ return false;
/*Cleanup and exit the emulator if requested. If the BIOS emulator
is needed after booting the card, we will not call BE_exit and
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
+COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o
COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#define FSL_HW_NUM_LAWS 10
#elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \
defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
+ defined(CONFIG_P1012) || defined(CONFIG_P1021) || \
+ defined(CONFIG_P1013) || defined(CONFIG_P1022) || \
defined(CONFIG_P2010) || defined(CONFIG_P2020)
#define FSL_HW_NUM_LAWS 12
#elif defined(CONFIG_PPC_P4080)
/*
- * Copyright 2007, Freescale Semiconductor, Inc
+ * Copyright 2007,2010 Freescale Semiconductor, Inc
* Andy Fleming
*
* Based vaguely on the pxa mmc code:
if (wml_value > 0x10)
wml_value = 0x10;
- wml_value = 0x100000 | wml_value;
-
+ esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
esdhc_write32(®s->dsaddr, (u32)data->dest);
} else {
if (wml_value > 0x80)
printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
return TIMEOUT;
}
- wml_value = wml_value << 16 | 0x10;
+
+ esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
+ wml_value << 16);
esdhc_write32(®s->dsaddr, (u32)data->src);
}
- esdhc_write32(®s->wml, wml_value);
-
esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize);
/* Calculate the timeout period for data transactions */
clk = (pre_div << 8) | (div << 4);
- /* On imx the clock must be stopped before changing frequency */
- if (cfg->clk_enable)
- esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN);
+ esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN);
esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk);
udelay(10000);
- clk = SYSCTL_PEREN;
- /* On imx systems the clock must be explicitely enabled */
- if (cfg->clk_enable)
- clk |= SYSCTL_CKEN;
+ clk = SYSCTL_PEREN | SYSCTL_CKEN;
esdhc_setbits32(®s->sysctl, clk);
}
return ret;
}
+static void esdhc_reset(struct fsl_esdhc *regs)
+{
+ unsigned long timeout = 100; /* wait max 100 ms */
+
+ /* reset the controller */
+ esdhc_write32(®s->sysctl, SYSCTL_RSTA);
+
+ /* hardware clears the bit when it is done */
+ while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
+ udelay(1000);
+ if (!timeout)
+ printf("MMC/SD: Reset never completed.\n");
+}
+
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
{
struct fsl_esdhc *regs;
sprintf(mmc->name, "FSL_ESDHC");
regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ /* First reset the eSDHC controller */
+ esdhc_reset(regs);
+
mmc->priv = cfg;
mmc->send_cmd = esdhc_send_cmd;
mmc->set_ios = esdhc_set_ios;
#endif
/* Wait for command completion */
+ reset_timer();
start = get_timer (0);
while (flash_is_busy (info, sector)) {
if (get_timer (start) > tout) {
#endif
/* Wait for command completion */
+ reset_timer();
start = get_timer(0);
while (1) {
switch (info->portwidth) {
slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000,
CONFIG_DEFAULT_SPI_MODE);
+ if(!slave)
+ return 0;
+
spi_claim_bus(slave);
/* command */
slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000,
CONFIG_DEFAULT_SPI_MODE);
+ if (!slave)
+ return 0;
+
spi_claim_bus(slave);
buf[0] = SPI_EEPROM_WREN;
/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
struct pci_controller *hose)
{
int off = fdt_path_offset(blob, pci_alias);
+ u32 bus_range[2];
- if (off >= 0) {
- u32 bus_range[2];
+ if (off < 0)
+ return;
+ /* We assume a cfg_addr not being set means we didn't setup the controller */
+ if ((hose == NULL) || (hose->cfg_addr == NULL)) {
+ fdt_del_node_and_alias(blob, pci_alias);
+ } else {
bus_range[0] = 0;
bus_range[1] = hose->last_busno - hose->first_busno;
fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
LIB := $(obj)libserial.a
+COBJS-$(CONFIG_ALTERA_UART) += altera_uart.o
+COBJS-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
+COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
--- /dev/null
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <nios2-io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*------------------------------------------------------------------
+ * JTAG acts as the serial port
+ *-----------------------------------------------------------------*/
+static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
+
+void serial_setbrg( void ){ return; }
+int serial_init( void ) { return(0);}
+
+void serial_putc (char c)
+{
+ while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0)
+ WATCHDOG_RESET ();
+ writel ((unsigned char)c, &jtag->data);
+}
+
+void serial_puts (const char *s)
+{
+ while (*s != 0)
+ serial_putc (*s++);
+}
+
+int serial_tstc (void)
+{
+ return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
+}
+
+int serial_getc (void)
+{
+ int c;
+ unsigned val;
+
+ while (1) {
+ WATCHDOG_RESET ();
+ val = readl (&jtag->data);
+ if (val & NIOS_JTAG_RVALID)
+ break;
+ }
+ c = val & 0x0ff;
+ return (c);
+}
--- /dev/null
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <nios2-io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*------------------------------------------------------------------
+ * UART the serial port
+ *-----------------------------------------------------------------*/
+
+static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE;
+
+#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
+
+/* Everything's already setup for fixed-baud PTF
+ * assignment
+ */
+void serial_setbrg (void){ return; }
+int serial_init (void) { return (0);}
+
+#else
+
+void serial_setbrg (void)
+{
+ unsigned div;
+
+ div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
+ writel (div, &uart->divisor);
+ return;
+}
+
+int serial_init (void)
+{
+ serial_setbrg ();
+ return (0);
+}
+
+#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
+
+/*-----------------------------------------------------------------------
+ * UART CONSOLE
+ *---------------------------------------------------------------------*/
+void serial_putc (char c)
+{
+ if (c == '\n')
+ serial_putc ('\r');
+ while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
+ WATCHDOG_RESET ();
+ writel ((unsigned char)c, &uart->txdata);
+}
+
+void serial_puts (const char *s)
+{
+ while (*s != 0) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_tstc (void)
+{
+ return (readl (&uart->status) & NIOS_UART_RRDY);
+}
+
+int serial_getc (void)
+{
+ while (serial_tstc () == 0)
+ WATCHDOG_RESET ();
+ return (readl (&uart->rxdata) & 0x00ff );
+}
/*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * YANU Support:
* Copyright 2010, Renato Andreola <renato.andreola@imagos.it>
*
* See file CREDITS for list of people who contributed to this
* MA 02111-1307 USA
*/
-
#include <common.h>
#include <watchdog.h>
#include <asm/io.h>
-#include <nios2-io.h>
#include <nios2-yanu.h>
DECLARE_GLOBAL_DATA_PTR;
-/*------------------------------------------------------------------
- * JTAG acts as the serial port
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
-
-static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-void serial_setbrg( void ){ return; }
-int serial_init( void ) { return(0);}
-
-void serial_putc (char c)
-{
- unsigned val;
-
- while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0)
- WATCHDOG_RESET ();
- writel (&jtag->data, (unsigned char)c);
-}
-
-void serial_puts (const char *s)
-{
- while (*s != 0)
- serial_putc (*s++);
-}
-
-int serial_tstc (void)
-{
- return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
-}
-
-int serial_getc (void)
-{
- int c;
- unsigned val;
-
- while (1) {
- WATCHDOG_RESET ();
- val = readl (&jtag->data);
- if (val & NIOS_JTAG_RVALID)
- break;
- }
- c = val & 0x0ff;
- return (c);
-}
-
-#elif defined(CONFIG_CONSOLE_YANU)
/*-----------------------------------------------------------------*/
/* YANU Imagos serial port */
/*-----------------------------------------------------------------*/
((unsigned)CONFIG_SYS_CLK_FREQ >> k);
baud = best_m + best_n * YANU_BAUDE;
- writel(&uart->baud, baud);
+ writel(baud, &uart->baud);
return;
}
((unsigned)CONFIG_SYS_CLK_FREQ >> k);
baud = best_m + best_n * YANU_BAUDE;
- writel(&uart->baud, baud);
+ writel(baud, &uart->baud);
return;
}
YANU_ACTION_RPE |
YANU_ACTION_RFE | YANU_ACTION_RFIFO_CLEAR | YANU_ACTION_TFIFO_CLEAR;
- writel(&uart->action, action);
+ writel(action, &uart->action);
/* control register cleanup */
/* no interrupts enabled */
control |= YANU_CONTROL_RDYDLY * YANU_RXFIFO_DLY;
control |= YANU_CONTROL_TXTHR * YANU_TXFIFO_THR;
- writel(&uart->control, control);
+ writel(control, &uart->control);
/* to set baud rate */
serial_setbrg();
WATCHDOG_RESET ();
}
- writel(&uart->data, (unsigned char)c);
+ writel((unsigned char)c, &uart->data);
}
void serial_puts (const char *s)
WATCHDOG_RESET ();
/* first we pull the char */
- writel(&uart->action, YANU_ACTION_RFIFO_PULL);
+ writel(YANU_ACTION_RFIFO_PULL, &uart->action);
return(readl(&uart->data) & YANU_DATA_CHAR_MASK);
}
-
-#else /*CONFIG_CONSOLE_YANU*/
-
-/*------------------------------------------------------------------
- * UART the serial port
- *-----------------------------------------------------------------*/
-
-static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE;
-
-#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
-
-/* Everything's already setup for fixed-baud PTF
- * assignment
- */
-void serial_setbrg (void){ return; }
-int serial_init (void) { return (0);}
-
-#else
-
-void serial_setbrg (void)
-{
- unsigned div;
-
- div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
- writel (&uart->divisor,div);
- return;
-}
-
-int serial_init (void)
-{
- serial_setbrg ();
- return (0);
-}
-
-#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
-
-
-/*-----------------------------------------------------------------------
- * UART CONSOLE
- *---------------------------------------------------------------------*/
-void serial_putc (char c)
-{
- if (c == '\n')
- serial_putc ('\r');
- while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
- WATCHDOG_RESET ();
- writel (&uart->txdata,(unsigned char)c);
-}
-
-void serial_puts (const char *s)
-{
- while (*s != 0) {
- serial_putc (*s++);
- }
-}
-
-int serial_tstc (void)
-{
- return (readl (&uart->status) & NIOS_UART_RRDY);
-}
-
-int serial_getc (void)
-{
- while (serial_tstc () == 0)
- WATCHDOG_RESET ();
- return (readl (&uart->rxdata) & 0x00ff );
-}
-
-#endif /* CONFIG_JTAG_CONSOLE */
{
0x12, /* bLength */
1, /* bDescriptorType: UDESC_DEVICE */
- 0x0002, /* bcdUSB: v2.0 */
+ cpu_to_le16(0x0200), /* bcdUSB: v2.0 */
9, /* bDeviceClass: UDCLASS_HUB */
0, /* bDeviceSubClass: UDSUBCLASS_HUB */
1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */
64, /* bMaxPacketSize: 64 bytes */
0x0000, /* idVendor */
0x0000, /* idProduct */
- 0x0001, /* bcdDevice */
+ cpu_to_le16(0x0100), /* bcdDevice */
1, /* iManufacturer */
2, /* iProduct */
0, /* iSerialNumber */
uint32_t reg;
uint32_t *status_reg;
- if (le16_to_cpu(req->index) >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+ if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
printf("The request port(%d) is not configured\n",
le16_to_cpu(req->index) - 1);
return -1;
tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
if (reg & EHCI_PS_OCA)
tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
- if (reg & EHCI_PS_PR &&
- (portreset & (1 << le16_to_cpu(req->index)))) {
- int ret;
- /* force reset to complete */
- reg = reg & ~(EHCI_PS_PR | EHCI_PS_CLEAR);
- ehci_writel(status_reg, reg);
- ret = handshake(status_reg, EHCI_PS_PR, 0, 2 * 1000);
- if (!ret)
- tmpbuf[0] |= USB_PORT_STAT_RESET;
- else
- printf("port(%d) reset error\n",
- le16_to_cpu(req->index) - 1);
- }
+ if (reg & EHCI_PS_PR)
+ tmpbuf[0] |= USB_PORT_STAT_RESET;
if (reg & EHCI_PS_PP)
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
ehci_writel(status_reg, reg);
break;
} else {
+ int ret;
+
reg |= EHCI_PS_PR;
reg &= ~EHCI_PS_PE;
ehci_writel(status_reg, reg);
wait_ms(50);
/* terminate the reset */
ehci_writel(status_reg, reg & ~EHCI_PS_PR);
- wait_ms(2);
- portreset |= 1 << le16_to_cpu(req->index);
+ /*
+ * A host controller must terminate the reset
+ * and stabilize the state of the port within
+ * 2 milliseconds
+ */
+ ret = handshake(status_reg, EHCI_PS_PR, 0,
+ 2 * 1000);
+ if (!ret)
+ portreset |=
+ 1 << le16_to_cpu(req->index);
+ else
+ printf("port(%d) reset error\n",
+ le16_to_cpu(req->index) - 1);
}
break;
default:
#ifdef CONFIG_PCI_EHCI_DEVICE
static struct pci_device_id ehci_pci_ids[] = {
/* Please add supported PCI EHCI controller ids here */
+ {0x1033, 0x00E0},
{0, 0}
};
#endif
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-#ifndef CONFIG_AT91_LEGACY
-#define CONFIG_AT91_LEGACY
-#warning Please update to use C structur SoC access !
-#endif
-
#include <asm/arch/hardware.h>
#include <asm/arch/io.h>
#include <asm/arch/at91_pmc.h>
int usb_cpu_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE;
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
defined(CONFIG_AT91SAM9261)
/* Enable PLLB */
- at91_sys_write(AT91_CKGR_PLLBR, get_pllb_init());
- while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
+ writel(get_pllb_init(), &pmc->pllbr);
+ while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
#endif
/* Enable USB host clock. */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+ writel(1 << AT91_ID_UHP, &pmc->pcer);
#ifdef CONFIG_AT91SAM9261
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0);
+ writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
#else
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
+ writel(AT91_PMC_UHP, &pmc->scer);
#endif
return 0;
int usb_cpu_stop(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE;
+
/* Disable USB host clock. */
- at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+ writel(1 << AT91_ID_UHP, &pmc->pcdr);
#ifdef CONFIG_AT91SAM9261
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0);
+ writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
#else
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
+ writel(AT91_PMC_UHP, &pmc->scdr);
#endif
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
/* Disable PLLB */
- at91_sys_write(AT91_CKGR_PLLBR, 0);
- while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0)
+ writel(0, &pmc->pllbr);
+ while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
#endif
* ToDo: identify these cases
*/
- DPRINT("radeonfb: Found %ldk of %s %d bits wide videoram\n",
+ DPRINT("radeonfb: Found %dk of %s %d bits wide videoram\n",
rinfo->video_ram / 1024,
rinfo->vram_ddr ? "DDR" : "SDRAM",
rinfo->vram_width);
rinfo->pdev.device = did;
rinfo->family = get_radeon_id_family(rinfo->pdev.device);
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0,
- &rinfo->fb_base_phys);
+ &rinfo->fb_base_bus);
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_2,
- &rinfo->mmio_base_phys);
- rinfo->fb_base_phys &= 0xfffff000;
- rinfo->mmio_base_phys &= ~0x04;
-
- rinfo->mmio_base = (void *)rinfo->mmio_base_phys;
- DPRINT("rinfo->mmio_base = 0x%x\n",rinfo->mmio_base);
+ &rinfo->mmio_base_bus);
+ rinfo->fb_base_bus &= 0xfffff000;
+ rinfo->mmio_base_bus &= ~0x04;
+
+ rinfo->mmio_base = pci_bus_to_virt(pdev, rinfo->mmio_base_bus,
+ PCI_REGION_MEM, 0, MAP_NOCACHE);
+ DPRINT("rinfo->mmio_base = 0x%p bus=0x%x\n",
+ rinfo->mmio_base, rinfo->mmio_base_bus);
rinfo->fb_local_base = INREG(MC_FB_LOCATION) << 16;
DPRINT("rinfo->fb_local_base = 0x%x\n",rinfo->fb_local_base);
/* PostBIOS with x86 emulater */
- BootVideoCardBIOS(pdev, NULL, 0);
+ if (!BootVideoCardBIOS(pdev, NULL, 0))
+ return -1;
/*
* Check for errata
rinfo->mapped_vram = min_t(unsigned long, MAX_MAPPED_VRAM,
rinfo->video_ram);
- rinfo->fb_base = (void *)rinfo->fb_base_phys;
-
- DPRINT("Radeon: framebuffer base phy address 0x%08x," \
- "MMIO base phy address 0x%08x," \
- "framebuffer local base 0x%08x.\n ",
- rinfo->fb_base_phys, rinfo->mmio_base_phys,
- rinfo->fb_local_base);
-
+ rinfo->fb_base = pci_bus_to_virt(pdev, rinfo->fb_base_bus,
+ PCI_REGION_MEM, 0, MAP_NOCACHE);
+ DPRINT("Radeon: framebuffer base address 0x%08x, "
+ "bus address 0x%08x\n"
+ "MMIO base address 0x%08x, bus address 0x%08x, "
+ "framebuffer local base 0x%08x.\n ",
+ (u32)rinfo->fb_base, rinfo->fb_base_bus,
+ (u32)rinfo->mmio_base, rinfo->mmio_base_bus,
+ rinfo->fb_local_base);
return 0;
}
return -1;
}
pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
- pGD->pciBase = rinfo->fb_base_phys;
- pGD->frameAdrs = rinfo->fb_base_phys;
+ pGD->pciBase = (unsigned int)rinfo->fb_base;
+ pGD->frameAdrs = (unsigned int)rinfo->fb_base;
pGD->memSize = 64 * 1024 * 1024;
/* Cursor Start Address */
- pGD->dprBase =
- (pGD->winSizeX * pGD->winSizeY * pGD->gdfBytesPP) + rinfo->fb_base_phys;
+ pGD->dprBase = (pGD->winSizeX * pGD->winSizeY * pGD->gdfBytesPP) +
+ (unsigned int)rinfo->fb_base;
if ((pGD->dprBase & 0x0fff) != 0) {
/* allign it */
pGD->dprBase &= 0xfffff000;
}
DPRINT ("Cursor Start %x Pattern Start %x\n", pGD->dprBase,
PATTERN_ADR);
- pGD->vprBase = rinfo->fb_base_phys; /* Dummy */
- pGD->cprBase = rinfo->fb_base_phys; /* Dummy */
+ pGD->vprBase = (unsigned int)rinfo->fb_base; /* Dummy */
+ pGD->cprBase = (unsigned int)rinfo->fb_base; /* Dummy */
/* set up Hardware */
/* Clear video memory (only visible screen area) */
struct pci_device_id pdev;
u16 family;
- u32 fb_base_phys;
- u32 mmio_base_phys;
+ u32 fb_base_bus;
+ u32 mmio_base_bus;
void *mmio_base;
void *fb_base;
}
#endif
+/*
+ * RLE8 bitmap support
+ */
+
+#ifdef CONFIG_VIDEO_BMP_RLE8
+/* Pre-calculated color table entry */
+struct palette {
+ union {
+ unsigned short w; /* word */
+ unsigned int dw; /* double word */
+ } ce; /* color entry */
+};
+
+/*
+ * Helper to draw encoded/unencoded run.
+ */
+static void draw_bitmap (uchar **fb, uchar *bm, struct palette *p,
+ int cnt, int enc)
+{
+ ulong addr = (ulong)*fb;
+ int *off;
+ int enc_off = 1;
+ int i;
+
+ /*
+ * Setup offset of the color index in the bitmap.
+ * Color index of encoded run is at offset 1.
+ */
+ off = enc ? &enc_off : &i;
+
+ switch (VIDEO_DATA_FORMAT) {
+ case GDF__8BIT_INDEX:
+ for (i = 0; i < cnt; i++)
+ *(unsigned char *)addr++ = bm[*off];
+ break;
+ case GDF_15BIT_555RGB:
+ case GDF_16BIT_565RGB:
+ /* differences handled while pre-calculating palette */
+ for (i = 0; i < cnt; i++) {
+ *(unsigned short *)addr = p[bm[*off]].ce.w;
+ addr += 2;
+ }
+ break;
+ case GDF_32BIT_X888RGB:
+ for (i = 0; i < cnt; i++) {
+ *(unsigned long *)addr = p[bm[*off]].ce.dw;
+ addr += 4;
+ }
+ break;
+ }
+ *fb = (uchar *)addr; /* return modified address */
+}
+
+static int display_rle8_bitmap (bmp_image_t *img, int xoff, int yoff,
+ int width, int height)
+{
+ unsigned char *bm;
+ unsigned char *fbp;
+ unsigned int cnt, runlen;
+ int decode = 1;
+ int x, y, bpp, i, ncolors;
+ struct palette p[256];
+ bmp_color_table_entry_t cte;
+ int green_shift, red_off;
+
+ x = 0;
+ y = __le32_to_cpu(img->header.height) - 1;
+ ncolors = __le32_to_cpu(img->header.colors_used);
+ bpp = VIDEO_PIXEL_SIZE;
+ fbp = (unsigned char *)((unsigned int)video_fb_address +
+ (((y + yoff) * VIDEO_COLS) + xoff) * bpp);
+
+ bm = (uchar *)img + __le32_to_cpu(img->header.data_offset);
+
+ /* pre-calculate and setup palette */
+ switch (VIDEO_DATA_FORMAT) {
+ case GDF__8BIT_INDEX:
+ for (i = 0; i < ncolors; i++) {
+ cte = img->color_table[i];
+ video_set_lut (i, cte.red, cte.green, cte.blue);
+ }
+ break;
+ case GDF_15BIT_555RGB:
+ case GDF_16BIT_565RGB:
+ if (VIDEO_DATA_FORMAT == GDF_15BIT_555RGB) {
+ green_shift = 3;
+ red_off = 10;
+ } else {
+ green_shift = 2;
+ red_off = 11;
+ }
+ for (i = 0; i < ncolors; i++) {
+ cte = img->color_table[i];
+ p[i].ce.w = SWAP16((unsigned short)
+ (((cte.red >> 3) << red_off) |
+ ((cte.green >> green_shift) << 5) |
+ cte.blue >> 3));
+ }
+ break;
+ case GDF_32BIT_X888RGB:
+ for (i = 0; i < ncolors; i++) {
+ cte = img->color_table[i];
+ p[i].ce.dw = SWAP32((cte.red << 16) | (cte.green << 8) |
+ cte.blue);
+ }
+ break;
+ default:
+ printf("RLE Bitmap unsupported in video mode 0x%x\n",
+ VIDEO_DATA_FORMAT);
+ return -1;
+ }
+
+ while (decode) {
+ switch (bm[0]) {
+ case 0:
+ switch (bm[1]) {
+ case 0:
+ /* scan line end marker */
+ bm += 2;
+ x = 0;
+ y--;
+ fbp = (unsigned char *)
+ ((unsigned int)video_fb_address +
+ (((y + yoff) * VIDEO_COLS) +
+ xoff) * bpp);
+ continue;
+ case 1:
+ /* end of bitmap data marker */
+ decode = 0;
+ break;
+ case 2:
+ /* run offset marker */
+ x += bm[2];
+ y -= bm[3];
+ fbp = (unsigned char *)
+ ((unsigned int)video_fb_address +
+ (((y + yoff) * VIDEO_COLS) +
+ x + xoff) * bpp);
+ bm += 4;
+ break;
+ default:
+ /* unencoded run */
+ cnt = bm[1];
+ runlen = cnt;
+ bm += 2;
+ if (y < height) {
+ if (x >= width) {
+ x += runlen;
+ goto next_run;
+ }
+ if (x + runlen > width)
+ cnt = width - x;
+
+ draw_bitmap (&fbp, bm, p, cnt, 0);
+ x += runlen;
+ }
+next_run:
+ bm += runlen;
+ if (runlen & 1)
+ bm++; /* 0 padding if length is odd */
+ }
+ break;
+ default:
+ /* encoded run */
+ if (y < height) { /* only draw into visible area */
+ cnt = bm[0];
+ runlen = cnt;
+ if (x >= width) {
+ x += runlen;
+ bm += 2;
+ continue;
+ }
+ if (x + runlen > width)
+ cnt = width - x;
+
+ draw_bitmap (&fbp, bm, p, cnt, 1);
+ x += runlen;
+ }
+ bm += 2;
+ break;
+ }
+ }
+ return 0;
+}
+#endif
+
/*
* Display the BMP file located at address bmp_image.
- * Only uncompressed
*/
int video_display_bitmap (ulong bmp_image, int x, int y)
{
debug ("Display-bmp: %d x %d with %d colors\n",
width, height, colors);
- if (compression != BMP_BI_RGB) {
+ if (compression != BMP_BI_RGB
+#ifdef CONFIG_VIDEO_BMP_RLE8
+ && compression != BMP_BI_RLE8
+#endif
+ ) {
printf ("Error: compression type %ld not supported\n",
compression);
#ifdef CONFIG_VIDEO_BMP_GZIP
((y + height - 1) * VIDEO_COLS * VIDEO_PIXEL_SIZE) +
x * VIDEO_PIXEL_SIZE);
+#ifdef CONFIG_VIDEO_BMP_RLE8
+ if (compression == BMP_BI_RLE8) {
+ return display_rle8_bitmap(bmp,
+ x, y, width, height);
+ }
+#endif
+
/* We handle only 8bpp or 24 bpp bitmap */
switch (le16_to_cpu (bmp->header.bit_count)) {
case 8:
static int at91_wdt_settimeout(unsigned int timeout)
{
unsigned int reg;
- unsigned int mr;
+ at91_wdt_t *wd = (at91_wdt_t *) AT91_WDT_BASE;
/* Check if disabled */
- mr = at91_sys_read(AT91_WDT_MR);
- if (mr & AT91_WDT_WDDIS) {
+ if (readl(&wd->mr) & AT91_WDT_MR_WDDIS) {
printf("sorry, watchdog is disabled\n");
return -1;
}
* Since WDV is a 12-bit counter, the maximum period is
* 4096 / 256 = 16 seconds.
*/
- reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
- /* | AT91_WDT_WDRPROC causes processor reset only */
- | AT91_WDT_WDDBGHLT /* disabled in debug mode */
- | AT91_WDT_WDD /* restart at any time */
- | (timeout & AT91_WDT_WDV); /* timer value */
- at91_sys_write(AT91_WDT_MR, reg);
+
+ reg = AT91_WDT_MR_WDRSTEN /* causes watchdog reset */
+ | AT91_WDT_MR_WDDBGHLT /* disabled in debug mode */
+ | AT91_WDT_MR_WDD(0xfff) /* restart at any time */
+ | AT91_WDT_MR_WDV(timeout); /* timer value */
+
+ writel(reg, &wd->mr);
return 0;
}
void hw_watchdog_reset(void)
{
- at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
+ at91_wdt_t *wd = (at91_wdt_t *) AT91_WDT_BASE;
+ writel(AT91_WDT_CR_WDRSTT | AT91_WDT_CR_KEY, &wd->cr);
}
void hw_watchdog_init(void)
#define AT91_PMC_IXR_PCKRDY3 0x00000800
#ifdef CONFIG_AT91_LEGACY
-
#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
+#endif
+
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+#ifdef CONFIG_AT91_LEGACY
#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#endif
+
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+#ifdef CONFIG_AT91_LEGACY
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
+#endif
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-
+#ifdef CONFIG_AT91_LEGACY
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
+#endif
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-
+#ifdef CONFIG_AT91_LEGACY
#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
+#endif
#define AT91_PMC_DIV (0xff << 0) /* Divider */
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_PLLA_WR_ERRATA (1 << 29) /* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
+#ifdef CONFIG_AT91_LEGACY
#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+#endif
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
#define AT91_PMC_CSS_SLOW (0 << 0)
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
+#ifdef CONFIG_AT91_LEGACY
#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
+#endif
#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#ifdef CONFIG_AT91_LEGACY
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
+#endif
#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
-
+#ifdef CONFIG_AT91_LEGACY
#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
-
#endif /* CONFIG_AT91_LEGACY */
#endif
#ifndef __ASM_ARM_ARCH_CLK_H_
#define __ASM_ARM_ARCH_CLK_H_
+#define APLL 0
+#define MPLL 1
+#define EPLL 2
+#define HPLL 3
+#define VPLL 4
+
void s5pc1xx_clock_init(void);
extern unsigned long (*get_pll_clk)(int pllreg);
struct s5pc1xx_gpio_bank gpio_h2;
struct s5pc1xx_gpio_bank gpio_h3;
};
+
+/* functions */
+void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg);
+void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en);
+void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio);
+void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en);
+unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio);
+void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
+void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
+void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
#endif
+/* Pin configurations */
+#define GPIO_INPUT 0x0
+#define GPIO_OUTPUT 0x1
+#define GPIO_IRQ 0xf
+#define GPIO_FUNC(x) (x)
+
+/* Pull mode */
+#define GPIO_PULL_NONE 0x0
+#define GPIO_PULL_DOWN 0x1
+#define GPIO_PULL_UP 0x2
+
+/* Drive Strength level */
+#define GPIO_DRV_1X 0x0
+#define GPIO_DRV_2X 0x1
+#define GPIO_DRV_3X 0x2
+#define GPIO_DRV_4X 0x3
+#define GPIO_DRV_FAST 0x0
+#define GPIO_DRV_SLOW 0x1
+
#endif
--- /dev/null
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: This file contains the register description for Memory subsystem
+ * (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
+ *
+ * Only SROMC is defined as of now
+ */
+
+#ifndef __ASM_ARCH_SMC_H_
+#define __ASM_ARCH_SMC_H_
+
+#define SMC_DATA16_WIDTH(x) (1<<((x*4)+0))
+#define SMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base address*/
+ /* 1-> Byte base address*/
+#define SMC_WAIT_ENABLE(x) (1<<((x*4)+2))
+#define SMC_BYTE_ENABLE(x) (1<<((x*4)+3))
+
+#define SMC_BC_TACS(x) (x << 28) /* 0clk address set-up */
+#define SMC_BC_TCOS(x) (x << 24) /* 4clk chip selection set-up */
+#define SMC_BC_TACC(x) (x << 16) /* 14clk access cycle */
+#define SMC_BC_TCOH(x) (x << 12) /* 1clk chip selection hold */
+#define SMC_BC_TAH(x) (x << 8) /* 4clk address holding time */
+#define SMC_BC_TACP(x) (x << 4) /* 6clk page mode access cycle */
+#define SMC_BC_PMC(x) (x << 0) /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5pc1xx_smc {
+ unsigned int bw;
+ unsigned int bc[6];
+};
+#endif /* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf);
+
+#endif /* __ASM_ARCH_SMC_H_ */
#ifndef __ASM_NIOS2_BITOPS_H_
#define __ASM_NIOS2_BITOPS_H_
-
-extern void set_bit(int nr, volatile void * a);
-extern void clear_bit(int nr, volatile void * a);
-extern int test_and_clear_bit(int nr, volatile void * a);
-extern void change_bit(unsigned long nr, volatile void *addr);
-extern int test_and_set_bit(int nr, volatile void * a);
-extern int test_and_change_bit(int nr, volatile void * addr);
-extern int test_bit(int nr, volatile void * a);
-extern int ffs(int i);
-#define PLATFORM_FFS
+/* copied from linux-2.6/include/asm-generic/bitops */
+#include <asm/bitops/atomic.h>
+#include <asm/bitops/non-atomic.h>
+#include <asm/bitops/ffs.h>
#endif /* __ASM_NIOS2_BITOPS_H */
--- /dev/null
+#ifndef _ASM_GENERIC_BITOPS_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_ATOMIC_H_
+
+#include <asm/types.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#include <asm/spinlock.h>
+#include <asm/cache.h> /* we use L1_CACHE_BYTES */
+
+/* Use an array of spinlocks for our atomic_ts.
+ * Hash function to index into a different SPINLOCK.
+ * Since "a" is usually an address, use one spinlock per cacheline.
+ */
+# define ATOMIC_HASH_SIZE 4
+# define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ]))
+
+extern raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned;
+
+/* Can't use raw_spin_lock_irq because of #include problems, so
+ * this is the substitute */
+#define _atomic_spin_lock_irqsave(l,f) do { \
+ raw_spinlock_t *s = ATOMIC_HASH(l); \
+ local_irq_save(f); \
+ __raw_spin_lock(s); \
+} while(0)
+
+#define _atomic_spin_unlock_irqrestore(l,f) do { \
+ raw_spinlock_t *s = ATOMIC_HASH(l); \
+ __raw_spin_unlock(s); \
+ local_irq_restore(f); \
+} while(0)
+
+
+#else
+# define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0)
+# define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
+#endif
+
+/*
+ * NMI events can occur at any time, including when interrupts have been
+ * disabled by *_irqsave(). So you can get NMI events occurring while a
+ * *_bit function is holding a spin lock. If the NMI handler also wants
+ * to do bit manipulation (and they do) then you can get a deadlock
+ * between the original caller of *_bit() and the NMI handler.
+ *
+ * by Keith Owens
+ */
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered. See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writing portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long flags;
+
+ _atomic_spin_lock_irqsave(p, flags);
+ *p |= mask;
+ _atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered. However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long flags;
+
+ _atomic_spin_lock_irqsave(p, flags);
+ *p &= ~mask;
+ _atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered. It may be
+ * reordered on other architectures than x86.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long flags;
+
+ _atomic_spin_lock_irqsave(p, flags);
+ *p ^= mask;
+ _atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It may be reordered on other architectures than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+ unsigned long flags;
+
+ _atomic_spin_lock_irqsave(p, flags);
+ old = *p;
+ *p = old | mask;
+ _atomic_spin_unlock_irqrestore(p, flags);
+
+ return (old & mask) != 0;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It can be reorderdered on other architectures other than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+ unsigned long flags;
+
+ _atomic_spin_lock_irqsave(p, flags);
+ old = *p;
+ *p = old & ~mask;
+ _atomic_spin_unlock_irqrestore(p, flags);
+
+ return (old & mask) != 0;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+ unsigned long flags;
+
+ _atomic_spin_lock_irqsave(p, flags);
+ old = *p;
+ *p = old ^ mask;
+ _atomic_spin_unlock_irqrestore(p, flags);
+
+ return (old & mask) != 0;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_ATOMIC_H */
--- /dev/null
+#ifndef _ASM_GENERIC_BITOPS_FFS_H_
+#define _ASM_GENERIC_BITOPS_FFS_H_
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+ int r = 1;
+
+ if (!x)
+ return 0;
+ if (!(x & 0xffff)) {
+ x >>= 16;
+ r += 16;
+ }
+ if (!(x & 0xff)) {
+ x >>= 8;
+ r += 8;
+ }
+ if (!(x & 0xf)) {
+ x >>= 4;
+ r += 4;
+ }
+ if (!(x & 3)) {
+ x >>= 2;
+ r += 2;
+ }
+ if (!(x & 1)) {
+ x >>= 1;
+ r += 1;
+ }
+ return r;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_FFS_H_ */
--- /dev/null
+#ifndef _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
+
+#include <asm/types.h>
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+ *p |= mask;
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+ *p &= ~mask;
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+ *p ^= mask;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail. You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old = *p;
+
+ *p = old | mask;
+ return (old & mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail. You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old = *p;
+
+ *p = old & ~mask;
+ return (old & mask) != 0;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr,
+ volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old = *p;
+
+ *p = old ^ mask;
+ return (old & mask) != 0;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+ return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
+}
+
+#endif /* _ASM_GENERIC_BITOPS_NON_ATOMIC_H_ */
--- /dev/null
+#include <asm-generic/errno.h>
({unsigned long val;\
asm volatile( "ldwio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;})
-#define writeb(addr,val)\
- asm volatile ("stbio %1, 0(%0)" : : "r" (addr), "r" (val))
-#define writew(addr,val)\
- asm volatile ("sthio %1, 0(%0)" : : "r" (addr), "r" (val))
-#define writel(addr,val)\
- asm volatile ("stwio %1, 0(%0)" : : "r" (addr), "r" (val))
+#define writeb(val,addr)\
+ asm volatile ("stbio %0, 0(%1)" : : "r" (val), "r" (addr))
+#define writew(val,addr)\
+ asm volatile ("sthio %0, 0(%1)" : : "r" (val), "r" (addr))
+#define writel(val,addr)\
+ asm volatile ("stwio %0, 0(%1)" : : "r" (val), "r" (addr))
#define inb(addr) readb(addr)
#define inw(addr) readw(addr)
#define inl(addr) readl(addr)
-#define outb(addr,val) writeb(addr,val)
-#define outw(addr,val) writew(addr,val)
-#define outl(addr,val) writel(addr,val)
+#define outb(val, addr) writeb(val,addr)
+#define outw(val, addr) writew(val,addr)
+#define outl(val, addr) writel(val,addr)
static inline void insb (unsigned long port, void *dst, unsigned long count)
{
#ifndef __ASM_NIOS2_SYSTEM_H_
#define __ASM_NIOS2_SYSTEM_H_
+#define local_irq_enable() __asm__ __volatile__ ( \
+ "rdctl r8, status\n" \
+ "ori r8, r8, 1\n" \
+ "wrctl status, r8\n" \
+ : : : "r8")
+
+#define local_irq_disable() __asm__ __volatile__ ( \
+ "rdctl r8, status\n" \
+ "andi r8, r8, 0xfffe\n" \
+ "wrctl status, r8\n" \
+ : : : "r8")
+
+#define local_save_flags(x) __asm__ __volatile__ ( \
+ "rdctl r8, status\n" \
+ "mov %0, r8\n" \
+ : "=r" (x) : : "r8", "memory")
+
+#define local_irq_restore(x) __asm__ __volatile__ ( \
+ "mov r8, %0\n" \
+ "wrctl status, r8\n" \
+ : : "r" (x) : "r8", "memory")
+
+/* For spinlocks etc */
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } \
+ while (0)
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ ((flags & NIOS2_STATUS_PIE_MSK) == 0x0); \
+})
+
#endif /* __ASM_NIOS2_SYSTEM_H */
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
#endif
#if defined(CONFIG_MPC8572) || defined(CONFIG_P1020) || \
+ defined(CONFIG_P1021) || defined(CONFIG_P1022) || \
defined(CONFIG_P2020) || defined(CONFIG_MPC8641)
#define CONFIG_MAX_CPUS 2
#elif defined(CONFIG_PPC_P4080)
#define HID1_RFXE (1<<17) /* Read Fault Exception Enable */
#define HID1_ASTME (1<<13) /* Address bus streaming mode */
#define HID1_ABE (1<<12) /* Address broadcast enable */
+#define HID1_MBDD (1<<6) /* optimized sync instruction */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#ifndef CONFIG_BOOKE
#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
#define SPRN_MCSRR0 0x23a /* Machine Check Save and Restore Register 0 */
#define SPRN_MCSRR1 0x23b /* Machine Check Save and Restore Register 1 */
#define SPRN_BUCSR 0x3f5 /* Branch Control and Status Register */
+#define BUCSR_BBFI 0x00000200 /* Branch buffer flash invalidate */
+#define BUCSR_BPEN 0x00000001 /* Branch prediction enable */
+#define BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN)
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
#define SPRN_PID1 0x279 /* Process ID Register 1 */
#define SVR_8572_E 0x80E800
#define SVR_P1011 0x80E500
#define SVR_P1011_E 0x80ED00
+#define SVR_P1012 0x80E501
+#define SVR_P1012_E 0x80ED01
+#define SVR_P1013 0x80E700
+#define SVR_P1013_E 0x80EF00
#define SVR_P1020 0x80E400
#define SVR_P1020_E 0x80EC00
+#define SVR_P1021 0x80E401
+#define SVR_P1021_E 0x80EC01
+#define SVR_P1022 0x80E600
+#define SVR_P1022_E 0x80EE00
#define SVR_P2010 0x80E300
#define SVR_P2010_E 0x80EB00
#define SVR_P2020 0x80E200
#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
#define CONFIG_CMD_ASKENV /* ask for env variable */
+#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */
#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
#define CONFIG_CMD_EDITENV /* editenv */
#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
-#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMD_FDC /* Floppy Disk Support */
#define CONFIG_CMD_LOADS /* loads */
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
+#define CONFIG_CMD_MG_DISK /* mGine m(g)flash IO node support */
#define CONFIG_CMD_MII /* MII support */
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_CMD_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_SOURCE /* "source" command support */
#define CONFIG_CMD_SPI /* SPI utility */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
+#define CONFIG_CMD_UBI /* UBI Support */
+#define CONFIG_CMD_UBIFS /* UBIFS Support */
#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
#define CONFIG_CMD_UNZIP /* unzip from memory to memory */
#define CONFIG_CMD_USB /* USB Support */
#define CONFIG_CMD_VFD /* VFD support (TRAB) */
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
-#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */
-#define CONFIG_CMD_MG_DISK /* mGine m(g)flash IO node support */
#endif /* _CONFIG_CMD_ALL_H */
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC32) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_ETHADDR 00:40:a6:80:14:5
*/
#define CONFIG_HARD_I2C 1 /* hardware support for i2c */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SDRAM_BANK0 1
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_I2C_MULTI_BUS 1
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
+#define CONFIG_ALTERA_UART 1 /* Use altera uart */
+#if defined(CONFIG_ALTERA_JTAG_UART)
#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
#else
#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
* TIMEBASE --
*
* The high res timer defaults to 1 msec. Since it includes the period
- * registers, we can slow it down to 10 msec using TMRCNT. If the default
- * period is acceptable, TMRCNT can be left undefined.
+ * registers, the interrupt frequency can be reduced using TMRCNT.
+ * If the default period is acceptable, TMRCNT can be left undefined.
+ * TMRMS represents the desired mecs per tick (msecs per interrupt).
*----------------------------------------------------------------------*/
+#define CONFIG_SYS_HZ 1000 /* Always 1000 */
#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
+#define CONFIG_SYS_NIOS_TMRCNT \
+ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
/*------------------------------------------------------------------------
* STATUS LED -- Provides a simple blinking led. For Nios2 each board
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
+#define CONFIG_ALTERA_UART 1 /* Use altera uart */
+#if defined(CONFIG_ALTERA_JTAG_UART)
#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
#else
#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
* TIMEBASE --
*
* The high res timer defaults to 1 msec. Since it includes the period
- * registers, we can slow it down to 10 msec using TMRCNT. If the default
- * period is acceptable, TMRCNT can be left undefined.
+ * registers, the interrupt frequency can be reduced using TMRCNT.
+ * If the default period is acceptable, TMRCNT can be left undefined.
+ * TMRMS represents the desired mecs per tick (msecs per interrupt).
*----------------------------------------------------------------------*/
+#define CONFIG_SYS_HZ 1000 /* Always 1000 */
#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
+#define CONFIG_SYS_NIOS_TMRCNT \
+ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
/*------------------------------------------------------------------------
* STATUS LED -- Provides a simple blinking led. For Nios2 each board
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
+#define CONFIG_ALTERA_UART 1 /* Use altera uart */
+#if defined(CONFIG_ALTERA_JTAG_UART)
#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
#else
#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
* TIMEBASE --
*
* The high res timer defaults to 1 msec. Since it includes the period
- * registers, we can slow it down to 10 msec using TMRCNT. If the default
- * period is acceptable, TMRCNT can be left undefined.
+ * registers, the interrupt frequency can be reduced using TMRCNT.
+ * If the default period is acceptable, TMRCNT can be left undefined.
+ * TMRMS represents the desired mecs per tick (msecs per interrupt).
*----------------------------------------------------------------------*/
+#define CONFIG_SYS_HZ 1000 /* Always 1000 */
#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec) */
+#define CONFIG_SYS_NIOS_TMRCNT \
+ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
/*------------------------------------------------------------------------
* STATUS LED -- Provides a simple blinking led. For Nios2 each board
#endif /* total size of a X1240 is 2048 bytes */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#if 0 /* test-only */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#else
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C hardware support */
#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
***************************************************************/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
-#define CONFIG_SYS_PIXIS_VBOOT_MASK 0x0C /* Reset altbank mask*/
+#define CONFIG_SYS_PIXIS_VBOOT_MASK 0xC0 /* Reset altbank mask */
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2010
+ * Matrix-Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <version.h>
+
+#define CONFIG_MPC5xxx 1
+#define CONFIG_MPC5200 1
+
+#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
+
+#define BOOTFLAG_COLD 0x01
+#define BOOTFLAG_WARM 0x02
+
+#define CONFIG_MISC_INIT_R 1
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CACHELINE_SHIFT 5
+#endif
+
+#define CONFIG_PSC_CONSOLE 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200,\
+ 230400}
+
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#undef CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_SYS_XLB_PIPELINING 1
+#define CONFIG_HIGH_BATS 1
+
+#define MV_CI mvSMR
+#define MV_VCI mvSMR
+#define MV_FPGA_DATA 0xff840000
+#define MV_FPGA_SIZE 0x1ff88
+#define MV_KERNEL_ADDR 0xfff00000
+#define MV_SCRIPT_ADDR 0xff806000
+#define MV_INITRD_ADDR 0xff880000
+#define MV_INITRD_LENGTH 0x00240000
+#define MV_SCRATCH_ADDR 0xffcc0000
+#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+
+#define MV_KERNEL_ADDR_RAM 0x00100000
+#define MV_INITRD_ADDR_RAM 0x00400000
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_NTPSERVER
+#define CONFIG_BOOTP_RANDOM_DELAY
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_VENDOREX
+
+/*
+ * Autoboot
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "abcdefg"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_BOOTCOMMAND "source ${script_addr}"
+#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" \
+ " allocate=6M"
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0" \
+ "console=no\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0" \
+ "fpga=0\0" \
+ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
+ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
+ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
+ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
+ "script_addr=" MK_STR(MV_SCRIPT_ADDR) "\0" \
+ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
+ "mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0" \
+ "mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0" \
+ "mv_scratch_addr=" MK_STR(MV_SCRATCH_ADDR) "\0" \
+ "mv_scratch_length=" MK_STR(MV_SCRATCH_LENGTH) "\0" \
+ "mv_version=" U_BOOT_VERSION "\0" \
+ "dhcp_client_id=" MK_STR(MV_CI) "\0" \
+ "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0" \
+ "netretry=no\0" \
+ "use_static_ipaddr=no\0" \
+ "static_ipaddr=192.168.0.101\0" \
+ "static_netmask=255.255.255.0\0" \
+ "static_gateway=0.0.0.0\0" \
+ "initrd_name=uInitrd.mvsmr-rfs\0" \
+ "zcip=yes\0" \
+ "netboot=no\0" \
+ ""
+
+#undef XMK_STR
+#undef MK_STR
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
+
+/*
+ * Flash configuration
+ */
+#undef CONFIG_FLASH_16BIT
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 50000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+
+#define CONFIG_SYS_LOWBOOT
+#define CONFIG_SYS_FLASH_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_SIZE 0x00800000
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_HAS_UID
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#define CONFIG_ENV_OFFSET 0x8000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x2000
+
+/* used by linker script to wrap code around */
+#define CONFIG_SCRIPT_OFFSET 0x6000
+#define CONFIG_SCRIPT_SECT_SIZE 0x2000
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_MBAR 0xF0000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
+
+#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT 1
+#endif
+
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN (512 << 10)
+#define CONFIG_SYS_MALLOC_LEN (512 << 10)
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C_MODULE 1
+#define CONFIG_SYS_I2C_SPEED 86000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_NET_RETRY_COUNT 5
+
+#define CONFIG_MPC5xxx_FEC
+#define CONFIG_MPC5xxx_FEC_MII100
+#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_NETDEV eth0
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#undef CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE 1024
+#else
+#define CONFIG_SYS_CBSIZE 256
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x00800000
+#define CONFIG_SYS_MEMTEST_END 0x02f00000
+
+#define CONFIG_SYS_HZ 1000
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x02000000
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 0x00200000
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG 0x00050044
+
+#define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI)
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
+
+#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG 0x00047800
+#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
+
+#define CONFIG_SYS_CS_BURST 0x000000f0
+#define CONFIG_SYS_CS_DEADCYCLE 0x33333303
+
+#define CONFIG_SYS_RESET_ADDRESS 0x00000100
+
+#undef FPGA_DEBUG
+#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_FPGA CONFIG_SYS_XILINX_SPARTAN2
+#define CONFIG_FPGA_XILINX 1
+#define CONFIG_FPGA_SPARTAN2 1
+#define CONFIG_FPGA_COUNT 1
+
+#endif
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_NS16550_MIN_FUNCTIONS
+#endif
#define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
-#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
+#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */
+
+#ifdef CONFIG_FSL_NGPIXIS
#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
#ifdef CONFIG_PHYS_64BIT
#define PIXIS_BASE_PHYS 0xfffdf0000ull
#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
-#define PIXIS_ID 0x0 /* Board ID at offset 0 */
-#define PIXIS_VER 0x1 /* Board version at offset 1 */
-#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
-#define PIXIS_CSR 0x3 /* PIXIS General control/status register */
-#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
-#define PIXIS_PWR 0x5 /* PIXIS Power status register */
-#define PIXIS_AUX 0x6 /* Auxiliary 1 register */
-#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
-#define PIXIS_AUX2 0x8 /* Auxiliary 2 register */
-#define PIXIS_VCTL 0x10 /* VELA Control Register */
-#define PIXIS_VSTAT 0x11 /* VELA Status Register */
-#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
-#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
-#define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */
-#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
-#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
-#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
-#define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */
-#define PIXIS_VSYSCLK0 0x19 /* VELA SYSCLK0 Register */
-#define PIXIS_VSYSCLK1 0x1A /* VELA SYSCLK1 Register */
-#define PIXIS_VSYSCLK2 0x1B /* VELA SYSCLK2 Register */
-#define PIXIS_VDDRCLK0 0x1C /* VELA DDRCLK0 Register */
-#define PIXIS_VDDRCLK1 0x1D /* VELA DDRCLK1 Register */
-#define PIXIS_VDDRCLK2 0x1E /* VELA DDRCLK2 Register */
-
-#define PIXIS_VWATCH 0x24 /* Watchdog Register */
-#define PIXIS_LED 0x25 /* LED Register */
-
-#define PIXIS_SW(x) 0x20 + (x - 1) * 2
-#define PIXIS_EN(x) 0x21 + (x - 1) * 2
-#define PIXIS_SW7_LBMAP 0xc0 /* SW7 - cfg_lbmap */
-#define PIXIS_SW7_VBANK 0x30 /* SW7 - cfg_vbank */
-
-/* old pixis referenced names */
-#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
-#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
-#define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0
-#define PIXIS_VSPEED2_TSEC1SER 0x8
-#define PIXIS_VSPEED2_TSEC2SER 0x4
-#define PIXIS_VSPEED2_TSEC3SER 0x2
-#define PIXIS_VSPEED2_TSEC4SER 0x1
-#define PIXIS_VCFGEN1_TSEC1SER 0x20
-#define PIXIS_VCFGEN1_TSEC2SER 0x20
-#define PIXIS_VCFGEN1_TSEC3SER 0x20
-#define PIXIS_VCFGEN1_TSEC4SER 0x20
-#define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \
- | PIXIS_VSPEED2_TSEC2SER \
- | PIXIS_VSPEED2_TSEC3SER \
- | PIXIS_VSPEED2_TSEC4SER)
-#define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \
- | PIXIS_VCFGEN1_TSEC2SER \
- | PIXIS_VCFGEN1_TSEC3SER \
- | PIXIS_VCFGEN1_TSEC4SER)
+#define PIXIS_LBMAP_SWITCH 7
+#define PIXIS_LBMAP_MASK 0xf0
+#define PIXIS_LBMAP_SHIFT 4
+#define PIXIS_LBMAP_ALTBANK 0x20
+#endif
#define CONFIG_SYS_INIT_RAM_LOCK 1
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
+#define CONFIG_ALTERA_UART 1 /* Use altera uart */
+#if defined(CONFIG_ALTERA_JTAG_UART)
#define CONFIG_SYS_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */
#else
#define CONFIG_SYS_NIOS_CONSOLE 0x009208a0 /* UART base addr */
* TIMEBASE --
*
* The high res timer defaults to 1 msec. Since it includes the period
- * registers, we can slow it down to 10 msec using TMRCNT. If the default
- * period is acceptable, TMRCNT can be left undefined.
+ * registers, the interrupt frequency can be reduced using TMRCNT.
+ * If the default period is acceptable, TMRCNT can be left undefined.
+ * TMRMS represents the desired mecs per tick (msecs per interrupt).
*----------------------------------------------------------------------*/
+#define CONFIG_SYS_HZ 1000 /* Always 1000 */
#define CONFIG_SYS_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/
+#define CONFIG_SYS_NIOS_TMRCNT \
+ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
/*
* The Atmel EEPROM uses 16Bit addressing.
***************************************************************/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
+#define CONFIG_ALTERA_UART 1 /* Use altera uart */
+#if defined(CONFIG_ALTERA_JTAG_UART)
#define CONFIG_SYS_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */
#else
#define CONFIG_SYS_NIOS_CONSOLE 0x02120840 /* UART base addr */
* TIMEBASE --
*
* The high res timer defaults to 1 msec. Since it includes the period
- * registers, we can slow it down to 10 msec using TMRCNT. If the default
- * period is acceptable, TMRCNT can be left undefined.
+ * registers, the interrupt frequency can be reduced using TMRCNT.
+ * If the default period is acceptable, TMRCNT can be left undefined.
+ * TMRMS represents the desired mecs per tick (msecs per interrupt).
*----------------------------------------------------------------------*/
+#define CONFIG_SYS_HZ 1000 /* Always 1000 */
#define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */
-#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
-#define CONFIG_SYS_NIOS_TMRMS 10 /* 10 msec per tick */
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ/(CONFIG_SYS_NIOS_TMRCNT + 1))
+#define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */
+#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period */
+#define CONFIG_SYS_NIOS_TMRCNT \
+ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
/*------------------------------------------------------------------------
* STATUS LED -- Provides a simple blinking led. For Nios2 each board
* I2C EEPROM (24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (24W16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC08) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (ATMEL 24C04N)
*/
#define CONFIG_HARD_I2C 1 /* Hardware assisted I2C */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* I2C
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7f
#define CONFIG_I2C_MULTI_BUS
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
* I2C
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*
*
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
*
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
* I2C
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
* Command line configuration.
*/
#include <config_cmd_default.h>
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
*/
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define I2C_INIT
#define I2C_ACTIVE 0
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NET
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_REGINFO
#define CONFIG_DOS_PARTITION 1
+/*
+ * Ethernet Contoller driver
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1 /* we have a SMC9115 on-board */
+#define CONFIG_SMC911X_16_BIT 1 /* SMC911X_16_BIT Mode */
+#define CONFIG_SMC911X_BASE 0x98800300 /* SMC911X Drive Base */
+#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
+#endif /* CONFIG_CMD_NET */
+
#endif /* __CONFIG_H */
*----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
+void fdt_del_node_and_alias(void *blob, const char *alias);
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */
* FSL SD/MMC Defines
*-------------------------------------------------------------------
*
- * Copyright 2007-2008, Freescale Semiconductor, Inc
+ * Copyright 2007-2008,2010 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
#define SYSCTL_PEREN 0x00000004
#define SYSCTL_HCKEN 0x00000002
#define SYSCTL_IPGEN 0x00000001
+#define SYSCTL_RSTA 0x01000000
#define IRQSTAT 0x0002e030
#define IRQSTAT_DMAE (0x10000000)
#define WML 0x2e044
#define WML_WRITE 0x00010000
+#define WML_RD_WML_MASK 0xff
+#define WML_WR_WML_MASK 0xff0000
#define BLKATTR 0x2e004
#define BLKATTR_CNT(x) ((x & 0xffff) << 16)
struct fsl_esdhc_cfg {
u32 esdhc_base;
u32 no_snoop;
- u32 clk_enable;
};
/* Select the correct accessors depending on endianess */
#endif /* __PPC__ */
#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) ||\
- defined (__microblaze__)
+ defined (__microblaze__) || defined (__nios2__)
struct stat {
unsigned short st_dev;
board_late_init ();
#endif
+#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
+ puts ("Net: ");
+#endif
+ eth_initialize (bd);
+#endif
+
/* main_loop */
for (;;) {
WATCHDOG_RESET ();
#include <asm/byteorder.h>
#include <asm/cache.h>
+#define NIOS_MAGIC 0x534f494e /* enable command line and initrd passing */
+
int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
{
- void (*kernel)(void) = (void (*)(void))images->ep;
+ void (*kernel)(int, int, int, char *) = (void *)images->ep;
+ char *commandline = getenv("bootargs");
+ ulong initrd_start = images->rd_start;
+ ulong initrd_end = images->rd_end;
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
return 1;
/* flushes data and instruction caches before calling the kernel */
- flush_dcache (0,CONFIG_SYS_DCACHE_SIZE);
- flush_icache (0,CONFIG_SYS_ICACHE_SIZE);
+ disable_interrupts();
+ flush_dcache((ulong)kernel, CONFIG_SYS_DCACHE_SIZE);
+ flush_icache((ulong)kernel, CONFIG_SYS_ICACHE_SIZE);
- /* For now we assume the Microtronix linux ... which only
- * needs to be called ;-)
- */
- kernel ();
+ debug("bootargs=%s @ 0x%lx\n", commandline, (ulong)&commandline);
+ debug("initrd=0x%lx-0x%lx\n", (ulong)initrd_start, (ulong)initrd_end);
+ kernel(NIOS_MAGIC, initrd_start, initrd_end, commandline);
/* does not return */
return 1;
{
int ifd = -1;
struct stat sbuf;
- unsigned char *ptr;
+ char *ptr;
int retval = 0;
struct image_type_params *tparams = NULL;
case 'a':
if (--argc <= 0)
usage ();
- params.addr = strtoul (*++argv,
- (char **)&ptr, 16);
+ params.addr = strtoul (*++argv, &ptr, 16);
if (*ptr) {
fprintf (stderr,
"%s: invalid load address %s\n",
case 'e':
if (--argc <= 0)
usage ();
- params.ep = strtoul (*++argv,
- (char **)&ptr, 16);
+ params.ep = strtoul (*++argv, &ptr, 16);
if (*ptr) {
fprintf (stderr,
"%s: invalid entry point %s\n",
projects / people / ms / u-boot.git / commitdiff
