3 * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
5 * Copyright © 2005 Agere Systems Inc.
9 *------------------------------------------------------------------------------
11 * et131x_initpci.c - Routines and data used to register the driver with the
12 * PCI (and PCI Express) subsystem, as well as basic driver
15 *------------------------------------------------------------------------------
19 * This software is provided subject to the following terms and conditions,
20 * which you should read carefully before using the software. Using this
21 * software indicates your acceptance of these terms and conditions. If you do
22 * not agree with these terms and conditions, do not use the software.
24 * Copyright © 2005 Agere Systems Inc.
25 * All rights reserved.
27 * Redistribution and use in source or binary forms, with or without
28 * modifications, are permitted provided that the following conditions are met:
30 * . Redistributions of source code must retain the above copyright notice, this
31 * list of conditions and the following Disclaimer as comments in the code as
32 * well as in the documentation and/or other materials provided with the
35 * . Redistributions in binary form must reproduce the above copyright notice,
36 * this list of conditions and the following Disclaimer in the documentation
37 * and/or other materials provided with the distribution.
39 * . Neither the name of Agere Systems Inc. nor the names of the contributors
40 * may be used to endorse or promote products derived from this software
41 * without specific prior written permission.
45 * THIS SOFTWARE IS PROVIDED \93AS IS\94 AND ANY EXPRESS OR IMPLIED WARRANTIES,
46 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
47 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
48 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
49 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
50 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
51 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
52 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
53 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
54 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
55 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
60 #include "et131x_version.h"
61 #include "et131x_debug.h"
62 #include "et131x_defs.h"
64 #include <linux/pci.h>
65 #include <linux/init.h>
66 #include <linux/module.h>
67 #include <linux/types.h>
68 #include <linux/kernel.h>
70 #include <linux/sched.h>
71 #include <linux/ptrace.h>
72 #include <linux/slab.h>
73 #include <linux/ctype.h>
74 #include <linux/string.h>
75 #include <linux/timer.h>
76 #include <linux/interrupt.h>
78 #include <linux/delay.h>
80 #include <asm/system.h>
81 #include <asm/bitops.h>
83 #include <linux/netdevice.h>
84 #include <linux/etherdevice.h>
85 #include <linux/skbuff.h>
86 #include <linux/if_arp.h>
87 #include <linux/ioport.h>
88 #include <linux/random.h>
90 #include "et1310_phy.h"
91 #include "et1310_pm.h"
92 #include "et1310_jagcore.h"
94 #include "et131x_adapter.h"
95 #include "et131x_netdev.h"
96 #include "et131x_config.h"
97 #include "et131x_isr.h"
99 #include "et1310_address_map.h"
100 #include "et1310_jagcore.h"
101 #include "et1310_tx.h"
102 #include "et1310_rx.h"
103 #include "et1310_mac.h"
104 #include "et1310_eeprom.h"
107 int __devinit
et131x_pci_setup(struct pci_dev
*pdev
,
108 const struct pci_device_id
*ent
);
109 void __devexit
et131x_pci_remove(struct pci_dev
*pdev
);
112 /* Modinfo parameters (filled out using defines from et131x_version.h) */
113 MODULE_AUTHOR(DRIVER_AUTHOR
);
114 MODULE_DESCRIPTION(DRIVER_INFO
);
115 MODULE_LICENSE(DRIVER_LICENSE
);
117 /* Module Parameters and related data for debugging facilities */
118 #ifdef CONFIG_ET131X_DEBUG
119 static u32 et131x_debug_level
= DBG_LVL
;
120 static u32 et131x_debug_flags
= DBG_DEFAULTS
;
124 Level of debugging desired (0-7)
125 7 : DBG_RX_ON | DBG_TX_ON
135 module_param(et131x_debug_level
, uint
, 0);
136 module_param(et131x_debug_flags
, uint
, 0);
138 MODULE_PARM_DESC(et131x_debug_level
, "Level of debugging desired (0-7)");
140 static dbg_info_t et131x_info
= { DRIVER_NAME_EXT
, 0, 0 };
141 dbg_info_t
*et131x_dbginfo
= &et131x_info
;
142 #endif /* CONFIG_ET131X_DEBUG */
144 static struct pci_device_id et131x_pci_table
[] __devinitdata
= {
145 {ET131X_PCI_VENDOR_ID
, ET131X_PCI_DEVICE_ID_GIG
, PCI_ANY_ID
,
146 PCI_ANY_ID
, 0, 0, 0UL},
147 {ET131X_PCI_VENDOR_ID
, ET131X_PCI_DEVICE_ID_FAST
, PCI_ANY_ID
,
148 PCI_ANY_ID
, 0, 0, 0UL},
152 MODULE_DEVICE_TABLE(pci
, et131x_pci_table
);
154 static struct pci_driver et131x_driver
= {
156 .id_table
= et131x_pci_table
,
157 .probe
= et131x_pci_setup
,
158 .remove
= __devexit_p(et131x_pci_remove
),
159 .suspend
= NULL
, //et131x_pci_suspend,
160 .resume
= NULL
, //et131x_pci_resume,
165 * et131x_init_module - The "main" entry point called on driver initialization
167 * Returns 0 on success, errno on failure (as defined in errno.h)
169 int et131x_init_module(void)
173 #ifdef CONFIG_ET131X_DEBUG
174 /* Set the level of debug messages displayed using the module
177 et131x_dbginfo
->dbgFlags
= et131x_debug_flags
;
179 switch (et131x_debug_level
) {
181 et131x_dbginfo
->dbgFlags
|= (DBG_RX_ON
| DBG_TX_ON
);
184 et131x_dbginfo
->dbgFlags
|= DBG_PARAM_ON
;
187 et131x_dbginfo
->dbgFlags
|= DBG_VERBOSE_ON
;
190 et131x_dbginfo
->dbgFlags
|= DBG_TRACE_ON
;
193 et131x_dbginfo
->dbgFlags
|= DBG_NOTICE_ON
;
201 #endif /* CONFIG_ET131X_DEBUG */
203 DBG_ENTER(et131x_dbginfo
);
204 DBG_PRINT("%s\n", DRIVER_INFO
);
206 result
= pci_register_driver(&et131x_driver
);
208 DBG_LEAVE(et131x_dbginfo
);
213 * et131x_cleanup_module - The entry point called on driver cleanup
215 void et131x_cleanup_module(void)
217 DBG_ENTER(et131x_dbginfo
);
219 pci_unregister_driver(&et131x_driver
);
221 DBG_LEAVE(et131x_dbginfo
);
225 * These macros map the driver-specific init_module() and cleanup_module()
226 * routines so they can be called by the kernel.
228 module_init(et131x_init_module
);
229 module_exit(et131x_cleanup_module
);
233 * et131x_find_adapter - Find the adapter and get all the assigned resources
234 * @adapter: pointer to our private adapter structure
236 * Returns 0 on success, errno on failure (as defined in errno.h)
238 int et131x_find_adapter(struct et131x_adapter
*adapter
, struct pci_dev
*pdev
)
242 uint8_t maxPayload
= 0;
243 uint8_t read_size_reg
;
245 DBG_ENTER(et131x_dbginfo
);
247 /* Allow disabling of Non-Maskable Interrupts in I/O space, to
248 * support validation.
250 if (adapter
->RegistryNMIDisable
) {
253 RegisterVal
= inb(ET1310_NMI_DISABLE
);
256 if (adapter
->RegistryNMIDisable
== 2) {
260 outb(ET1310_NMI_DISABLE
, RegisterVal
);
263 /* We first need to check the EEPROM Status code located at offset
264 * 0xB2 of config space
266 result
= pci_read_config_byte(pdev
, ET1310_PCI_EEPROM_STATUS
,
269 /* THIS IS A WORKAROUND:
270 * I need to call this function twice to get my card in a
271 * LG M1 Express Dual running. I tried also a msleep before this
272 * function, because I thougth there could be some time condidions
273 * but it didn't work. Call the whole function twice also work.
275 result
= pci_read_config_byte(pdev
, ET1310_PCI_EEPROM_STATUS
,
277 if (result
!= PCIBIOS_SUCCESSFUL
) {
278 DBG_ERROR(et131x_dbginfo
, "Could not read PCI config space for "
280 DBG_LEAVE(et131x_dbginfo
);
284 /* Determine if the error(s) we care about are present. If they are
285 * present, we need to fail.
287 if (eepromStat
& 0x4C) {
288 result
= pci_read_config_byte(pdev
, PCI_REVISION_ID
,
289 &adapter
->RevisionID
);
290 if (result
!= PCIBIOS_SUCCESSFUL
) {
291 DBG_ERROR(et131x_dbginfo
,
292 "Could not read PCI config space for "
294 DBG_LEAVE(et131x_dbginfo
);
296 } else if (adapter
->RevisionID
== 0x01) {
298 uint8_t ucTemp
[4] = { 0xFE, 0x13, 0x10, 0xFF };
300 /* Re-write the first 4 bytes if we have an eeprom
301 * present and the revision id is 1, this fixes the
302 * corruption seen with 1310 B Silicon
304 for (nLoop
= 0; nLoop
< 3; nLoop
++) {
305 EepromWriteByte(adapter
, nLoop
, ucTemp
[nLoop
],
310 DBG_ERROR(et131x_dbginfo
,
311 "Fatal EEPROM Status Error - 0x%04x\n", eepromStat
);
313 /* This error could mean that there was an error reading the
314 * eeprom or that the eeprom doesn't exist. We will treat
315 * each case the same and not try to gather additional
316 * information that normally would come from the eeprom, like
319 adapter
->bEepromPresent
= false;
321 DBG_LEAVE(et131x_dbginfo
);
324 DBG_TRACE(et131x_dbginfo
, "EEPROM Status Code - 0x%04x\n",
326 adapter
->bEepromPresent
= true;
329 /* Read the EEPROM for information regarding LED behavior. Refer to
330 * ET1310_phy.c, et131x_xcvr_init(), for its use.
332 EepromReadByte(adapter
, 0x70, &adapter
->eepromData
[0], 0, SINGLE_BYTE
);
333 EepromReadByte(adapter
, 0x71, &adapter
->eepromData
[1], 0, SINGLE_BYTE
);
335 if (adapter
->eepromData
[0] != 0xcd) {
336 adapter
->eepromData
[1] = 0x00; // Disable all optional features
339 /* Let's set up the PORT LOGIC Register. First we need to know what
340 * the max_payload_size is
342 result
= pci_read_config_byte(pdev
, ET1310_PCI_MAX_PYLD
, &maxPayload
);
343 if (result
!= PCIBIOS_SUCCESSFUL
) {
344 DBG_ERROR(et131x_dbginfo
, "Could not read PCI config space for "
345 "Max Payload Size\n");
346 DBG_LEAVE(et131x_dbginfo
);
350 /* Program the Ack/Nak latency and replay timers */
351 maxPayload
&= 0x07; // Only the lower 3 bits are valid
353 if (maxPayload
< 2) {
354 const uint16_t AckNak
[2] = { 0x76, 0xD0 };
355 const uint16_t Replay
[2] = { 0x1E0, 0x2ED };
357 result
= pci_write_config_word(pdev
, ET1310_PCI_ACK_NACK
,
359 if (result
!= PCIBIOS_SUCCESSFUL
) {
360 DBG_ERROR(et131x_dbginfo
,
361 "Could not write PCI config space "
363 DBG_LEAVE(et131x_dbginfo
);
367 result
= pci_write_config_word(pdev
, ET1310_PCI_REPLAY
,
369 if (result
!= PCIBIOS_SUCCESSFUL
) {
370 DBG_ERROR(et131x_dbginfo
,
371 "Could not write PCI config space "
372 "for Replay Timer\n");
373 DBG_LEAVE(et131x_dbginfo
);
378 /* l0s and l1 latency timers. We are using default values.
379 * Representing 001 for L0s and 010 for L1
381 result
= pci_write_config_byte(pdev
, ET1310_PCI_L0L1LATENCY
, 0x11);
382 if (result
!= PCIBIOS_SUCCESSFUL
) {
383 DBG_ERROR(et131x_dbginfo
,
384 "Could not write PCI config space for "
386 DBG_LEAVE(et131x_dbginfo
);
390 /* Change the max read size to 2k */
391 result
= pci_read_config_byte(pdev
, 0x51, &read_size_reg
);
392 if (result
!= PCIBIOS_SUCCESSFUL
) {
393 DBG_ERROR(et131x_dbginfo
,
394 "Could not read PCI config space for Max read size\n");
395 DBG_LEAVE(et131x_dbginfo
);
399 read_size_reg
&= 0x8f;
400 read_size_reg
|= 0x40;
402 result
= pci_write_config_byte(pdev
, 0x51, read_size_reg
);
403 if (result
!= PCIBIOS_SUCCESSFUL
) {
404 DBG_ERROR(et131x_dbginfo
,
405 "Could not write PCI config space for Max read size\n");
406 DBG_LEAVE(et131x_dbginfo
);
410 /* PCI Express Configuration registers 0x48-0x5B (Device Control) */
411 result
= pci_read_config_word(pdev
, ET1310_PCI_DEV_CTRL
,
412 &adapter
->PciXDevCtl
);
413 if (result
!= PCIBIOS_SUCCESSFUL
) {
414 DBG_ERROR(et131x_dbginfo
,
415 "Could not read PCI config space for PCI Express Dev Ctl\n");
416 DBG_LEAVE(et131x_dbginfo
);
420 /* Get MAC address from config space if an eeprom exists, otherwise
421 * the MAC address there will not be valid
423 if (adapter
->bEepromPresent
) {
426 for (i
= 0; i
< ETH_ALEN
; i
++) {
427 result
= pci_read_config_byte(
428 pdev
, ET1310_PCI_MAC_ADDRESS
+ i
,
429 adapter
->PermanentAddress
+ i
);
430 if (result
!= PCIBIOS_SUCCESSFUL
) {
431 DBG_ERROR(et131x_dbginfo
,
432 "Could not read PCI config space for MAC address\n");
433 DBG_LEAVE(et131x_dbginfo
);
439 DBG_LEAVE(et131x_dbginfo
);
444 * et131x_error_timer_handler
445 * @data: timer-specific variable; here a pointer to our adapter structure
447 * The routine called when the error timer expires, to track the number of
450 void et131x_error_timer_handler(unsigned long data
)
452 struct et131x_adapter
*pAdapter
= (struct et131x_adapter
*) data
;
455 pm_csr
.value
= readl(&pAdapter
->CSRAddress
->global
.pm_csr
.value
);
457 if (pm_csr
.bits
.pm_phy_sw_coma
== 0) {
458 if (pAdapter
->RegistryMACStat
) {
459 UpdateMacStatHostCounters(pAdapter
);
462 DBG_VERBOSE(et131x_dbginfo
,
463 "No interrupts, in PHY coma, pm_csr = 0x%x\n",
467 if (!pAdapter
->Bmsr
.bits
.link_status
&&
468 pAdapter
->RegistryPhyComa
&&
469 pAdapter
->PoMgmt
.TransPhyComaModeOnBoot
< 11) {
470 pAdapter
->PoMgmt
.TransPhyComaModeOnBoot
++;
473 if (pAdapter
->PoMgmt
.TransPhyComaModeOnBoot
== 10) {
474 if (!pAdapter
->Bmsr
.bits
.link_status
475 && pAdapter
->RegistryPhyComa
) {
476 if (pm_csr
.bits
.pm_phy_sw_coma
== 0) {
477 // NOTE - This was originally a 'sync with interrupt'. How
478 // to do that under Linux?
479 et131x_enable_interrupts(pAdapter
);
480 EnablePhyComa(pAdapter
);
485 /* This is a periodic timer, so reschedule */
486 mod_timer(&pAdapter
->ErrorTimer
, jiffies
+
487 TX_ERROR_PERIOD
* HZ
/ 1000);
491 * et131x_link_detection_handler
493 * Timer function for link up at driver load time
495 void et131x_link_detection_handler(unsigned long data
)
497 struct et131x_adapter
*pAdapter
= (struct et131x_adapter
*) data
;
498 unsigned long lockflags
;
500 /* Let everyone know that we have run */
501 pAdapter
->bLinkTimerActive
= false;
503 if (pAdapter
->MediaState
== 0) {
504 spin_lock_irqsave(&pAdapter
->Lock
, lockflags
);
506 pAdapter
->MediaState
= NETIF_STATUS_MEDIA_DISCONNECT
;
507 MP_CLEAR_FLAG(pAdapter
, fMP_ADAPTER_LINK_DETECTION
);
509 spin_unlock_irqrestore(&pAdapter
->Lock
, lockflags
);
511 netif_carrier_off(pAdapter
->netdev
);
513 pAdapter
->bSetPending
= false;
518 * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
519 * @adapter: pointer to our private adapter structure
521 * Returns 0 on success, errno on failure (as defined in errno.h)
523 int et131x_adapter_setup(struct et131x_adapter
*pAdapter
)
527 DBG_ENTER(et131x_dbginfo
);
529 /* Configure the JAGCore */
530 ConfigGlobalRegs(pAdapter
);
532 ConfigMACRegs1(pAdapter
);
533 ConfigMMCRegs(pAdapter
);
535 ConfigRxMacRegs(pAdapter
);
536 ConfigTxMacRegs(pAdapter
);
538 ConfigRxDmaRegs(pAdapter
);
539 ConfigTxDmaRegs(pAdapter
);
541 ConfigMacStatRegs(pAdapter
);
543 /* Move the following code to Timer function?? */
544 status
= et131x_xcvr_find(pAdapter
);
547 DBG_WARNING(et131x_dbginfo
, "Could not find the xcvr\n");
550 /* Prepare the TRUEPHY library. */
551 ET1310_PhyInit(pAdapter
);
553 /* Reset the phy now so changes take place */
554 ET1310_PhyReset(pAdapter
);
557 ET1310_PhyPowerDown(pAdapter
, 1);
560 * We need to turn off 1000 base half dulplex, the mac does not
561 * support it. For the 10/100 part, turn off all gig advertisement
563 if (pAdapter
->DeviceID
!= ET131X_PCI_DEVICE_ID_FAST
) {
564 ET1310_PhyAdvertise1000BaseT(pAdapter
, TRUEPHY_ADV_DUPLEX_FULL
);
566 ET1310_PhyAdvertise1000BaseT(pAdapter
, TRUEPHY_ADV_DUPLEX_NONE
);
570 ET1310_PhyPowerDown(pAdapter
, 0);
572 et131x_setphy_normal(pAdapter
);
574 DBG_LEAVE(et131x_dbginfo
);
579 * et131x_setup_hardware_properties - set up the MAC Address on the ET1310
580 * @adapter: pointer to our private adapter structure
582 void et131x_setup_hardware_properties(struct et131x_adapter
*adapter
)
584 DBG_ENTER(et131x_dbginfo
);
586 /* If have our default mac from registry and no mac address from
587 * EEPROM then we need to generate the last octet and set it on the
590 if (!adapter
->bOverrideAddress
) {
591 if (adapter
->PermanentAddress
[0] == 0x00 &&
592 adapter
->PermanentAddress
[1] == 0x00 &&
593 adapter
->PermanentAddress
[2] == 0x00 &&
594 adapter
->PermanentAddress
[3] == 0x00 &&
595 adapter
->PermanentAddress
[4] == 0x00 &&
596 adapter
->PermanentAddress
[5] == 0x00) {
598 * We need to randomly generate the last octet so we
599 * decrease our chances of setting the mac address to
600 * same as another one of our cards in the system
602 get_random_bytes(&adapter
->CurrentAddress
[5], 1);
605 * We have the default value in the register we are
606 * working with so we need to copy the current
607 * address into the permanent address
609 memcpy(adapter
->PermanentAddress
,
610 adapter
->CurrentAddress
, ETH_ALEN
);
612 /* We do not have an override address, so set the
613 * current address to the permanent address and add
616 memcpy(adapter
->CurrentAddress
,
617 adapter
->PermanentAddress
, ETH_ALEN
);
621 DBG_LEAVE(et131x_dbginfo
);
625 * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
626 * @adapter: pointer to our private adapter structure
628 void et131x_soft_reset(struct et131x_adapter
*adapter
)
630 DBG_ENTER(et131x_dbginfo
);
632 /* Disable MAC Core */
633 writel(0xc00f0000, &adapter
->CSRAddress
->mac
.cfg1
.value
);
635 /* Set everything to a reset value */
636 writel(0x7F, &adapter
->CSRAddress
->global
.sw_reset
.value
);
637 writel(0x000f0000, &adapter
->CSRAddress
->mac
.cfg1
.value
);
638 writel(0x00000000, &adapter
->CSRAddress
->mac
.cfg1
.value
);
640 DBG_LEAVE(et131x_dbginfo
);
644 * et131x_align_allocated_memory - Align allocated memory on a given boundary
645 * @adapter: pointer to our adapter structure
646 * @phys_addr: pointer to Physical address
647 * @offset: pointer to the offset variable
648 * @mask: correct mask
650 void et131x_align_allocated_memory(struct et131x_adapter
*adapter
,
652 uint64_t *offset
, uint64_t mask
)
656 DBG_ENTER(et131x_dbginfo
);
660 new_addr
= *phys_addr
& ~mask
;
662 if (new_addr
!= *phys_addr
) {
663 /* Move to next aligned block */
664 new_addr
+= mask
+ 1;
665 /* Return offset for adjusting virt addr */
666 *offset
= new_addr
- *phys_addr
;
667 /* Return new physical address */
668 *phys_addr
= new_addr
;
671 DBG_LEAVE(et131x_dbginfo
);
675 * et131x_adapter_memory_alloc
676 * @adapter: pointer to our private adapter structure
678 * Returns 0 on success, errno on failure (as defined in errno.h).
680 * Allocate all the memory blocks for send, receive and others.
682 int et131x_adapter_memory_alloc(struct et131x_adapter
*adapter
)
686 DBG_ENTER(et131x_dbginfo
);
689 /* Allocate memory for the Tx Ring */
690 status
= et131x_tx_dma_memory_alloc(adapter
);
692 DBG_ERROR(et131x_dbginfo
,
693 "et131x_tx_dma_memory_alloc FAILED\n");
697 /* Receive buffer memory allocation */
698 status
= et131x_rx_dma_memory_alloc(adapter
);
700 DBG_ERROR(et131x_dbginfo
,
701 "et131x_rx_dma_memory_alloc FAILED\n");
702 et131x_tx_dma_memory_free(adapter
);
706 /* Init receive data structures */
707 status
= et131x_init_recv(adapter
);
709 DBG_ERROR(et131x_dbginfo
, "et131x_init_recv FAILED\n");
710 et131x_tx_dma_memory_free(adapter
);
711 et131x_rx_dma_memory_free(adapter
);
716 DBG_LEAVE(et131x_dbginfo
);
721 * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
722 * @adapter: pointer to our private adapter structure
724 void et131x_adapter_memory_free(struct et131x_adapter
*adapter
)
726 DBG_ENTER(et131x_dbginfo
);
728 /* Free DMA memory */
729 et131x_tx_dma_memory_free(adapter
);
730 et131x_rx_dma_memory_free(adapter
);
732 DBG_LEAVE(et131x_dbginfo
);
737 * @pdev: a pointer to the device's pci_dev structure
739 * Registered in the pci_driver structure, this function is called when the
740 * PCI subsystem detects that a PCI device which matches the information
741 * contained in the pci_device_id table has been removed.
743 void __devexit
et131x_pci_remove(struct pci_dev
*pdev
)
745 struct net_device
*netdev
;
746 struct et131x_adapter
*adapter
;
748 DBG_ENTER(et131x_dbginfo
);
750 /* Retrieve the net_device pointer from the pci_dev struct, as well
751 * as the private adapter struct
753 netdev
= (struct net_device
*) pci_get_drvdata(pdev
);
754 adapter
= netdev_priv(netdev
);
756 /* Perform device cleanup */
757 unregister_netdev(netdev
);
758 et131x_adapter_memory_free(adapter
);
759 iounmap(adapter
->CSRAddress
);
761 pci_release_regions(pdev
);
762 pci_disable_device(pdev
);
764 DBG_LEAVE(et131x_dbginfo
);
768 * et131x_pci_setup - Perform device initialization
769 * @pdev: a pointer to the device's pci_dev structure
770 * @ent: this device's entry in the pci_device_id table
772 * Returns 0 on success, errno on failure (as defined in errno.h)
774 * Registered in the pci_driver structure, this function is called when the
775 * PCI subsystem finds a new PCI device which matches the information
776 * contained in the pci_device_id table. This routine is the equivalent to
777 * a device insertion routine.
779 int __devinit
et131x_pci_setup(struct pci_dev
*pdev
,
780 const struct pci_device_id
*ent
)
785 struct net_device
*netdev
= NULL
;
786 struct et131x_adapter
*adapter
= NULL
;
788 DBG_ENTER(et131x_dbginfo
);
790 /* Enable the device via the PCI subsystem */
791 result
= pci_enable_device(pdev
);
793 DBG_ERROR(et131x_dbginfo
, "pci_enable_device() failed\n");
797 /* Perform some basic PCI checks */
798 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
799 DBG_ERROR(et131x_dbginfo
,
800 "Can't find PCI device's base address\n");
805 result
= pci_request_regions(pdev
, DRIVER_NAME
);
807 DBG_ERROR(et131x_dbginfo
, "Can't get PCI resources\n");
811 /* Enable PCI bus mastering */
812 DBG_TRACE(et131x_dbginfo
, "Setting PCI Bus Mastering...\n");
813 pci_set_master(pdev
);
815 /* Query PCI for Power Mgmt Capabilities
817 * NOTE: Now reading PowerMgmt in another location; is this still
820 pm_cap
= pci_find_capability(pdev
, PCI_CAP_ID_PM
);
822 DBG_ERROR(et131x_dbginfo
,
823 "Cannot find Power Management capabilities\n");
825 goto err_release_res
;
828 /* Check the DMA addressing support of this device */
829 if (!pci_set_dma_mask(pdev
, 0xffffffffffffffffULL
)) {
830 DBG_TRACE(et131x_dbginfo
, "64-bit DMA addressing supported\n");
831 pci_using_dac
= true;
834 pci_set_consistent_dma_mask(pdev
, 0xffffffffffffffffULL
);
836 DBG_ERROR(et131x_dbginfo
,
837 "Unable to obtain 64 bit DMA for consistent allocations\n");
838 goto err_release_res
;
840 } else if (!pci_set_dma_mask(pdev
, 0xffffffffULL
)) {
841 DBG_TRACE(et131x_dbginfo
,
842 "64-bit DMA addressing NOT supported\n");
843 DBG_TRACE(et131x_dbginfo
,
844 "32-bit DMA addressing will be used\n");
845 pci_using_dac
= false;
847 DBG_ERROR(et131x_dbginfo
, "No usable DMA addressing method\n");
849 goto err_release_res
;
852 /* Allocate netdev and private adapter structs */
853 DBG_TRACE(et131x_dbginfo
,
854 "Allocate netdev and private adapter structs...\n");
855 netdev
= et131x_device_alloc();
856 if (netdev
== NULL
) {
857 DBG_ERROR(et131x_dbginfo
, "Couldn't alloc netdev struct\n");
859 goto err_release_res
;
862 /* Setup the fundamental net_device and private adapter structure elements */
863 DBG_TRACE(et131x_dbginfo
, "Setting fundamental net_device info...\n");
864 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
866 //netdev->features |= NETIF_F_HIGHDMA;
870 * NOTE - Turn this on when we're ready to deal with SG-DMA
872 * NOTE: According to "Linux Device Drivers", 3rd ed, Rubini et al,
873 * if checksumming is not performed in HW, then the kernel will not
877 * "Note that the kernel does not perform scatter/gather I/O to your
878 * device if it does not also provide some form of checksumming as
879 * well. The reason is that, if the kernel has to make a pass over a
880 * fragmented ("nonlinear") packet to calculate the checksum, it
881 * might as well copy the data and coalesce the packet at the same
884 * This has been verified by setting the flags below and still not
885 * receiving a scattered buffer from the network stack, so leave it
886 * off until checksums are calculated in HW.
888 //netdev->features |= NETIF_F_SG;
889 //netdev->features |= NETIF_F_NO_CSUM;
890 //netdev->features |= NETIF_F_LLTX;
892 /* Allocate private adapter struct and copy in relevant information */
893 adapter
= netdev_priv(netdev
);
894 adapter
->pdev
= pdev
;
895 adapter
->netdev
= netdev
;
896 adapter
->VendorID
= pdev
->vendor
;
897 adapter
->DeviceID
= pdev
->device
;
899 /* Do the same for the netdev struct */
900 netdev
->irq
= pdev
->irq
;
901 netdev
->base_addr
= pdev
->resource
[0].start
;
903 /* Initialize spinlocks here */
904 DBG_TRACE(et131x_dbginfo
, "Initialize spinlocks...\n");
906 spin_lock_init(&adapter
->Lock
);
907 spin_lock_init(&adapter
->TCBSendQLock
);
908 spin_lock_init(&adapter
->TCBReadyQLock
);
909 spin_lock_init(&adapter
->SendHWLock
);
910 spin_lock_init(&adapter
->SendWaitLock
);
911 spin_lock_init(&adapter
->RcvLock
);
912 spin_lock_init(&adapter
->RcvPendLock
);
913 spin_lock_init(&adapter
->FbrLock
);
914 spin_lock_init(&adapter
->PHYLock
);
916 /* Parse configuration parameters into the private adapter struct */
917 et131x_config_parse(adapter
);
919 /* Find the physical adapter
921 * NOTE: This is the equivalent of the MpFindAdapter() routine; can we
922 * lump it's init with the device specific init below into a
923 * single init function?
925 //while (et131x_find_adapter(adapter, pdev) != 0);
926 et131x_find_adapter(adapter
, pdev
);
928 /* Map the bus-relative registers to system virtual memory */
929 DBG_TRACE(et131x_dbginfo
,
930 "Mapping bus-relative registers to virtual memory...\n");
932 adapter
->CSRAddress
= ioremap_nocache(pci_resource_start(pdev
, 0),
933 pci_resource_len(pdev
, 0));
934 if (adapter
->CSRAddress
== NULL
) {
935 DBG_ERROR(et131x_dbginfo
, "Cannot map device registers\n");
940 /* Perform device-specific initialization here (See code below) */
942 /* If Phy COMA mode was enabled when we went down, disable it here. */
944 PM_CSR_t GlobalPmCSR
= { 0 };
946 GlobalPmCSR
.bits
.pm_sysclk_gate
= 1;
947 GlobalPmCSR
.bits
.pm_txclk_gate
= 1;
948 GlobalPmCSR
.bits
.pm_rxclk_gate
= 1;
949 writel(GlobalPmCSR
.value
,
950 &adapter
->CSRAddress
->global
.pm_csr
.value
);
953 /* Issue a global reset to the et1310 */
954 DBG_TRACE(et131x_dbginfo
, "Issuing soft reset...\n");
955 et131x_soft_reset(adapter
);
957 /* Disable all interrupts (paranoid) */
958 DBG_TRACE(et131x_dbginfo
, "Disable device interrupts...\n");
959 et131x_disable_interrupts(adapter
);
961 /* Allocate DMA memory */
962 result
= et131x_adapter_memory_alloc(adapter
);
964 DBG_ERROR(et131x_dbginfo
,
965 "Could not alloc adapater memory (DMA)\n");
969 /* Init send data structures */
970 DBG_TRACE(et131x_dbginfo
, "Init send data structures...\n");
971 et131x_init_send(adapter
);
973 adapter
->PoMgmt
.PowerState
= NdisDeviceStateD0
;
975 /* Register the interrupt
977 * NOTE - This is being done in the open routine, where most other
978 * Linux drivers setup IRQ handlers. Make sure device
979 * interrupts are not turned on before the IRQ is registered!!
981 * What we will do here is setup the task structure for the
982 * ISR's deferred handler
984 INIT_WORK(&adapter
->task
, et131x_isr_handler
);
986 /* Determine MAC Address, and copy into the net_device struct */
987 DBG_TRACE(et131x_dbginfo
, "Retrieve MAC address...\n");
988 et131x_setup_hardware_properties(adapter
);
990 memcpy(netdev
->dev_addr
, adapter
->CurrentAddress
, ETH_ALEN
);
992 /* Setup et1310 as per the documentation */
993 DBG_TRACE(et131x_dbginfo
, "Setup the adapter...\n");
994 et131x_adapter_setup(adapter
);
996 /* Create a timer to count errors received by the NIC */
997 init_timer(&adapter
->ErrorTimer
);
999 adapter
->ErrorTimer
.expires
= jiffies
+ TX_ERROR_PERIOD
* HZ
/ 1000;
1000 adapter
->ErrorTimer
.function
= et131x_error_timer_handler
;
1001 adapter
->ErrorTimer
.data
= (unsigned long)adapter
;
1003 /* Initialize link state */
1004 et131x_link_detection_handler((unsigned long)adapter
);
1006 /* Intialize variable for counting how long we do not have link status */
1007 adapter
->PoMgmt
.TransPhyComaModeOnBoot
= 0;
1009 /* We can enable interrupts now
1011 * NOTE - Because registration of interrupt handler is done in the
1012 * device's open(), defer enabling device interrupts to that
1016 /* Register the net_device struct with the Linux network layer */
1017 DBG_TRACE(et131x_dbginfo
, "Registering net_device...\n");
1018 if ((result
= register_netdev(netdev
)) != 0) {
1019 DBG_ERROR(et131x_dbginfo
, "register_netdev() failed\n");
1023 /* Register the net_device struct with the PCI subsystem. Save a copy
1024 * of the PCI config space for this device now that the device has
1025 * been initialized, just in case it needs to be quickly restored.
1027 pci_set_drvdata(pdev
, netdev
);
1029 pci_save_state(adapter
->pdev
);
1032 DBG_LEAVE(et131x_dbginfo
);
1036 et131x_adapter_memory_free(adapter
);
1038 iounmap(adapter
->CSRAddress
);
1040 free_netdev(netdev
);
1042 pci_release_regions(pdev
);
1044 pci_disable_device(pdev
);