+ PPP_NIC=${DEVICE}
+
+ if [ "$TYPE" == "vdsl" ]; then
+ boot_mesg "Createing VLAN Interface ${DEVICE}.${RED_VDSL_INET_VLAN} ..."
+ modprobe 8021q
+ vconfig add ${DEVICE} ${RED_VDSL_INET_VLAN}
+ if [ -n "$MAC1" ]; then
+ boot_mesg "Setting mac address on ${DEVICE}.${RED_VDSL_INET_VLAN} to ${MAC1}"
+ ip link set dev ${DEVICE}.${RED_VDSL_INET_VLAN} address ${MAC1}
+ evaluate_retval
+ fi
+ PPP_NIC=${DEVICE}.${RED_VDSL_INET_VLAN}
+ sleep 0.2
+ ip link set ${PPP_NIC} up
+ TYPE="pppoe"
+ if [ "${RED_VDSL_IPTV_DISABLE}" == "0" ]; then
+ PIDFILE="/var/run/dhcpcd-${DEVICE}.${RED_VDSL_IPTV_VLAN}.pid"
+ LEASEINFO="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.${RED_VDSL_IPTV_VLAN}.info"
+ # Don't startup services ...
+ DHCP_START="-C 70 "
+ DHCP_STOP="-k "
+ # Test to see if there is a stale pid file
+ if [ -f "$PIDFILE" ]; then
+ ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
+ if [ $? != 0 ]; then
+ rm -f /var/run/dhcpcd-${DEVICE}.${RED_VDSL_IPTV_VLAN}.pid > /dev/null
+ fi
+ fi
+
+ if [ ! -f "$PIDFILE" ]; then
+ boot_mesg "Createing VLAN Interface ${DEVICE}.${RED_VDSL_IPTV_VLAN} ..."
+ vconfig add ${DEVICE} ${RED_VDSL_IPTV_VLAN}
+ if [ -n "$MAC2" ]; then
+ boot_mesg "Setting mac address on ${DEVICE}.${RED_VDSL_IPTV_VLAN} to ${MAC2}"
+ ip link set dev ${DEVICE}.${RED_VDSL_IPTV_VLAN} address ${MAC2}
+ evaluate_retval
+ fi
+ boot_mesg -n "Starting dhcpcd on the ${DEVICE}.${RED_VDSL_IPTV_VLAN} interface..."
+ /sbin/dhcpcd ${DEVICE}.${RED_VDSL_IPTV_VLAN} ${DHCP_START} >/dev/null 2>&1
+ RET="$?"
+
+ if [ "$RET" = "0" ]; then
+ . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.${RED_VDSL_IPTV_VLAN}.info
+ echo ""
+ echo_ok
+ boot_mesg " DHCP Assigned Settings for ${DEVICE}.${RED_VDSL_IPTV_VLAN}:"
+ boot_mesg_flush
+ boot_mesg " IP Address: $ip_address"
+ boot_mesg_flush
+ boot_mesg " Hostname: $RED_DHCP_HOSTNAME"
+ boot_mesg_flush
+ boot_mesg " Subnet Mask: $subnet_mask"
+ boot_mesg_flush
+ boot_mesg " Default Gateway: $routers"
+ boot_mesg_flush
+ boot_mesg " DNS Server: $domain_name_servers"
+ boot_mesg_flush
+
+ else
+ echo ""
+ $(exit "$RET")
+ evaluate_retval
+ fi
+ fi
+ fi
+ fi
+
+ if [ "$TYPE" == "pppoeatm" ] || [ "$TYPE" == "pptpatm" ]; then
+ PPP_NIC=nas0
+ boot_mesg "Createing ATM-Bridge as $PPP_NIC ..."
+ br2684ctl -c0 -e${ENCAP} -a0.${VPI}.${VCI} >/dev/null 2>&1 &
+ sleep 1
+ if [ "$TYPE" == "pppoeatm" ]; then
+ TYPE="pppoe"
+ fi
+ if [ "$TYPE" == "pptpatm" ]; then
+ TYPE="pptp"
+ fi
+ fi
+ if [ "$TYPE" == "pppoe" ] || [ "$TYPE" == "pptp" ]; then
+ if [ "$PPP_NIC" == "" ]; then
+ boot_mesg "No device for red interface given. Check netsetup or dialprofile!" ${FAILURE}
+ echo_failure
+ exit 0
+ fi
+ boot_mesg "Bringing up the $TYPE interface on $PPP_NIC ..."
+ ip addr flush dev $PPP_NIC >/dev/null 2>&1
+ if [ "$TYPE" == "pptp" ]; then
+ if [ "$PPTP_NICCFG" == "dhcp" ]; then
+ # Don't startup services ...
+ DHCP_START="-C 70 "
+ DHCP_STOP="-k "
+
+ # Test to see if there is a stale pid file
+ if [ -f "$PIDFILE" ]; then
+ ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
+ if [ $? != 0 ]; then
+ rm -f /var/run/dhcpcd-${DEVICE}.pid > /dev/null
+ fi
+ fi
+
+ if [ ! -f "$PIDFILE" ]; then
+ boot_mesg -n "Starting dhcpcd on the ${DEVICE} interface..."
+ /sbin/dhcpcd ${DEVICE} ${DHCP_START} >/dev/null 2>&1
+ RET="$?"
+
+ if [ "$RET" = "0" ]; then
+ . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
+ echo ""
+ echo_ok
+ boot_mesg " DHCP Assigned Settings for ${DEVICE}:"
+ boot_mesg_flush
+ boot_mesg " IP Address: $ip_address"
+ boot_mesg_flush
+ boot_mesg " Hostname: $RED_DHCP_HOSTNAME"
+ boot_mesg_flush
+ boot_mesg " Subnet Mask: $subnet_mask"
+ boot_mesg_flush
+ boot_mesg " Default Gateway: $routers"
+ boot_mesg_flush
+ boot_mesg " DNS Server: $domain_name_servers"
+ boot_mesg_flush
+ /sbin/route add $PPTP_PEER gw $routers $PPP_NIC
+ else
+ echo ""
+ $(exit "$RET")
+ evaluate_retval
+ fi
+ fi
+ else
+ ip addr add $PPTP_NICCFG dev $PPP_NIC
+ fi
+ fi
+ ip link set ${PPP_NIC} up