2 <!DOCTYPE refentry PUBLIC
"-//OASIS/DTD DocBook XML V4.2//EN"
3 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
5 <refentry id=
"network-zone-pptp">
7 <title>network-zone-pptp
</title>
8 <productname>network
</productname>
12 <contrib>Developer
</contrib>
13 <firstname>Stefan
</firstname>
14 <surname>Schantl
</surname>
15 <email>stefan.schantl@ipfire.org
</email>
21 <refentrytitle>network-zone-pptp
</refentrytitle>
22 <manvolnum>8</manvolnum>
26 <refname>network-zone-pptp
</refname>
27 <refpurpose>Network Configuration Control Program
</refpurpose>
32 <command>network zone new
<replaceable>ZONE
</replaceable> pptp ...
</command>
37 <title>Description
</title>
40 The pptp hook creates a Point-to-Point tunnel over IP and is used by some ISP for
41 internet dialin or other VPN services.
46 <title>Options
</title>
49 The following options are understood:
55 <option>--peer-address=
<replaceable>ADDRESS
</replaceable></option>
60 The IPv4 address of the system to connect to.
63 For PPTP dialin connections this will be IP address of your modem.
64 If you are using PPTP for VPN services use the address of the remote server.
71 <option>--username=
<replaceable>USERNAME
</replaceable></option>
76 Sets the username for authentication.
83 <option>--password=
<replaceable>PASSWORD
</replaceable></option>
88 Sets the password for authentication.
91 Use the
<option>--auth=
</option> option to transmit it
92 in a secure manner to the provider.
99 <option>--port=
<replaceable>PORT
</replaceable></option>
104 This options sets the port, pppd is using to connect to
105 the modem. This may be a normal ethernet or vlan interface.
108 The port option is only required if you are using PPTP for
116 <option>--interface-address=
<replaceable>ADDRESS
</replaceable></option>
121 Add this IPV4 address to the configured port.
125 Optionally a DHCP client can be used, istead of
126 configuring a static IPv4 address. Use the
<option>--use-dhcp
</option>
127 to benefit from this feature.
134 <option>--prefix=
<replaceable>PREFIX
</replaceable></option>
139 Sets the following network prefix to the configured port.
146 <option>--use-dhcp=[
<emphasis>false
</emphasis>|true]
</option>
151 Use a DHCP client to gather the interface address and prefix settings.
158 <option>--ipv6=[
<emphasis>true
</emphasis>|false]
</option>
163 By this option the support for IPv6 can be enabled or disabled.
170 <option>--mtu=
<emphasis>1492</emphasis></option>
175 Sets the default MTU of the PPP connection.
176 The default value is
1492 which is a common MTU used
184 <option>--auth=[chap|pap]
</option>
189 Define the authentication method that is used to
190 authenticate against your provider.
191 The default is to use the provider's preference.
196 <emphasis>Challange-Handshake Authentication Protocol
</emphasis>
197 (chap) is the preferred secure method.
202 <emphasis>Password Authentication Protocol
</emphasis>
203 (pap) sends the plaintext password to the authentication
204 server which is the reason why it should be avoided to use PAP.
213 <option>--refuse-auth-methods=
<replaceable>STRING
</replaceable></option>
218 By this option, you may define a list of auth methods which
219 are not supported by the service provider.
227 <title>See Also
</title>
231 <refentrytitle>network
</refentrytitle>
232 <manvolnum>8</manvolnum>
235 <refentrytitle>network-zone
</refentrytitle>
236 <manvolnum>8</manvolnum>