INSTALL

   1 Basic Installation
   2 ==================
   3
   4 These are installation instructions for Bash.
   5
   6 The simplest way to compile Bash is:
   7
   8   1. `cd' to the directory containing the source code and type
   9      `./configure' to configure Bash for your system.  If you're using
  10      `csh' on an old version of System V, you might need to type `sh
  11      ./configure' instead to prevent `csh' from trying to execute
  12      `configure' itself.
  13
  14      Running `configure' takes some time.  While running, it prints
  15      messages telling which features it is checking for.
  16
  17   2. Type `make' to compile Bash and build the `bashbug' bug reporting
  18      script.
  19
  20   3. Optionally, type `make tests' to run the Bash test suite.
  21
  22   4. Type `make install' to install `bash' and `bashbug'.  This will
  23      also install the manual pages and Info file.
  24
  25 The `configure' shell script attempts to guess correct values for
  26 various system-dependent variables used during compilation.  It uses
  27 those values to create a `Makefile' in each directory of the package
  28 (the top directory, the `builtins', `doc', and `support' directories,
  29 each directory under `lib', and several others).  It also creates a
  30 `config.h' file containing system-dependent definitions.  Finally, it
  31 creates a shell script named `config.status' that you can run in the
  32 future to recreate the current configuration, a file `config.cache'
  33 that saves the results of its tests to speed up reconfiguring, and a
  34 file `config.log' containing compiler output (useful mainly for
  35 debugging `configure').  If at some point `config.cache' contains
  36 results you don't want to keep, you may remove or edit it.
  37
  38 To find out more about the options and arguments that the `configure'
  39 script understands, type
  40
  41      bash-2.04$ ./configure --help
  42
  43 at the Bash prompt in your Bash source directory.
  44
  45 If you need to do unusual things to compile Bash, please try to figure
  46 out how `configure' could check whether or not to do them, and mail
  47 diffs or instructions to <bash-maintainers@gnu.org> so they can be
  48 considered for the next release.
  49
  50 The file `configure.in' is used to create `configure' by a program
  51 called Autoconf.  You only need `configure.in' if you want to change it
  52 or regenerate `configure' using a newer version of Autoconf.  If you do
  53 this, make sure you are using Autoconf version 2.50 or newer.
  54
  55 You can remove the program binaries and object files from the source
  56 code directory by typing `make clean'.  To also remove the files that
  57 `configure' created (so you can compile Bash for a different kind of
  58 computer), type `make distclean'.
  59
  60 Compilers and Options
  61 =====================
  62
  63 Some systems require unusual options for compilation or linking that
  64 the `configure' script does not know about.  You can give `configure'
  65 initial values for variables by setting them in the environment.  Using
  66 a Bourne-compatible shell, you can do that on the command line like
  67 this:
  68
  69      CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
  70
  71 On systems that have the `env' program, you can do it like this:
  72
  73      env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
  74
  75 The configuration process uses GCC to build Bash if it is available.
  76
  77 Compiling For Multiple Architectures
  78 ====================================
  79
  80 You can compile Bash for more than one kind of computer at the same
  81 time, by placing the object files for each architecture in their own
  82 directory.  To do this, you must use a version of `make' that supports
  83 the `VPATH' variable, such as GNU `make'.  `cd' to the directory where
  84 you want the object files and executables to go and run the `configure'
  85 script from the source directory.  You may need to supply the
  86 `--srcdir=PATH' argument to tell `configure' where the source files
  87 are.  `configure' automatically checks for the source code in the
  88 directory that `configure' is in and in `..'.
  89
  90 If you have to use a `make' that does not supports the `VPATH'
  91 variable, you can compile Bash for one architecture at a time in the
  92 source code directory.  After you have installed Bash for one
  93 architecture, use `make distclean' before reconfiguring for another
  94 architecture.
  95
  96 Alternatively, if your system supports symbolic links, you can use the
  97 `support/mkclone' script to create a build tree which has symbolic
  98 links back to each file in the source directory.  Here's an example
  99 that creates a build directory in the current directory from a source
 100 directory `/usr/gnu/src/bash-2.0':
 101
 102      bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
 103
 104 The `mkclone' script requires Bash, so you must have already built Bash
 105 for at least one architecture before you can create build directories
 106 for other architectures.
 107
 108 Installation Names
 109 ==================
 110
 111 By default, `make install' will install into `/usr/local/bin',
 112 `/usr/local/man', etc.  You can specify an installation prefix other
 113 than `/usr/local' by giving `configure' the option `--prefix=PATH', or
 114 by specifying a value for the `DESTDIR' `make' variable when running
 115 `make install'.
 116
 117 You can specify separate installation prefixes for
 118 architecture-specific files and architecture-independent files.  If you
 119 give `configure' the option `--exec-prefix=PATH', `make install' will
 120 use PATH as the prefix for installing programs and libraries.
 121 Documentation and other data files will still use the regular prefix.
 122
 123 Specifying the System Type
 124 ==========================
 125
 126 There may be some features `configure' can not figure out
 127 automatically, but need to determine by the type of host Bash will run
 128 on.  Usually `configure' can figure that out, but if it prints a
 129 message saying it can not guess the host type, give it the
 130 `--host=TYPE' option.  `TYPE' can either be a short name for the system
 131 type, such as `sun4', or a canonical name with three fields:
 132 `CPU-COMPANY-SYSTEM' (e.g., `i386-unknown-freebsd4.2').
 133
 134 See the file `support/config.sub' for the possible values of each field.
 135
 136 Sharing Defaults
 137 ================
 138
 139 If you want to set default values for `configure' scripts to share, you
 140 can create a site shell script called `config.site' that gives default
 141 values for variables like `CC', `cache_file', and `prefix'.  `configure'
 142 looks for `PREFIX/share/config.site' if it exists, then
 143 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 144 `CONFIG_SITE' environment variable to the location of the site script.
 145 A warning: the Bash `configure' looks for a site script, but not all
 146 `configure' scripts do.
 147
 148 Operation Controls
 149 ==================
 150
 151 `configure' recognizes the following options to control how it operates.
 152
 153 `--cache-file=FILE'
 154      Use and save the results of the tests in FILE instead of
 155      `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
 156      debugging `configure'.
 157
 158 `--help'
 159      Print a summary of the options to `configure', and exit.
 160
 161 `--quiet'
 162 `--silent'
 163 `-q'
 164      Do not print messages saying which checks are being made.
 165
 166 `--srcdir=DIR'
 167      Look for the Bash source code in directory DIR.  Usually
 168      `configure' can determine that directory automatically.
 169
 170 `--version'
 171      Print the version of Autoconf used to generate the `configure'
 172      script, and exit.
 173
 174 `configure' also accepts some other, not widely used, boilerplate
 175 options.  `configure --help' prints the complete list.
 176
 177 Optional Features
 178 =================
 179
 180 The Bash `configure' has a number of `--enable-FEATURE' options, where
 181 FEATURE indicates an optional part of Bash.  There are also several
 182 `--with-PACKAGE' options, where PACKAGE is something like `bash-malloc'
 183 or `purify'.  To turn off the default use of a package, use
 184 `--without-PACKAGE'.  To configure Bash without a feature that is
 185 enabled by default, use `--disable-FEATURE'.
 186
 187 Here is a complete list of the `--enable-' and `--with-' options that
 188 the Bash `configure' recognizes.
 189
 190 `--with-afs'
 191      Define if you are using the Andrew File System from Transarc.
 192
 193 `--with-bash-malloc'
 194      Use the Bash version of `malloc' in `lib/malloc/malloc.c'.  This
 195      is not the same `malloc' that appears in GNU libc, but an older
 196      version derived from the 4.2 BSD `malloc'.  This `malloc' is very
 197      fast, but wastes some space on each allocation.  This option is
 198      enabled by default.  The `NOTES' file contains a list of systems
 199      for which this should be turned off, and `configure' disables this
 200      option automatically for a number of systems.
 201
 202 `--with-curses'
 203      Use the curses library instead of the termcap library.  This should
 204      be supplied if your system has an inadequate or incomplete termcap
 205      database.
 206
 207 `--with-gnu-malloc'
 208      A synonym for `--with-bash-malloc'.
 209
 210 `--with-installed-readline[=PREFIX]'
 211      Define this to make Bash link with a locally-installed version of
 212      Readline rather than the version in `lib/readline'.  This works
 213      only with Readline 4.3 and later versions.  If PREFIX is `yes' or
 214      not supplied, `configure' uses the values of the make variables
 215      `includedir' and `libdir', which are subdirectories of `prefix' by
 216      default, to find the installed version of Readline if it is not in
 217      the standard system include and library directories.  If PREFIX is
 218      `no', Bash links with the version in `lib/readline'.  If PREFIX is
 219      set to any other value, `configure' treats it as a directory
 220      pathname and looks for the installed version of Readline in
 221      subdirectories of that directory (include files in
 222      PREFIX/`include' and the library in PREFIX/`lib').
 223
 224 `--with-purify'
 225      Define this to use the Purify memory allocation checker from
 226      Rational Software.
 227
 228 `--enable-minimal-config'
 229      This produces a shell with minimal features, close to the
 230      historical Bourne shell.
 231
 232 There are several `--enable-' options that alter how Bash is compiled
 233 and linked, rather than changing run-time features.
 234
 235 `--enable-largefile'
 236      Enable support for large files
 237      (http://www.sas.com/standards/large_file/x_open.20Mar96.html) if
 238      the operating system requires special compiler options to build
 239      programs which can access large files.  This is enabled by
 240      default, if the operating system provides large file support.
 241
 242 `--enable-profiling'
 243      This builds a Bash binary that produces profiling information to be
 244      processed by `gprof' each time it is executed.
 245
 246 `--enable-static-link'
 247      This causes Bash to be linked statically, if `gcc' is being used.
 248      This could be used to build a version to use as root's shell.
 249
 250 The `minimal-config' option can be used to disable all of the following
 251 options, but it is processed first, so individual options may be
 252 enabled using `enable-FEATURE'.
 253
 254 All of the following options except for `disabled-builtins' and
 255 `xpg-echo-default' are enabled by default, unless the operating system
 256 does not provide the necessary support.
 257
 258 `--enable-alias'
 259      Allow alias expansion and include the `alias' and `unalias'
 260      builtins (*note Aliases::).
 261
 262 `--enable-arith-for-command'
 263      Include support for the alternate form of the `for' command that
 264      behaves like the C language `for' statement (*note Looping
 265      Constructs::).
 266
 267 `--enable-array-variables'
 268      Include support for one-dimensional array shell variables (*note
 269      Arrays::).
 270
 271 `--enable-bang-history'
 272      Include support for `csh'-like history substitution (*note History
 273      Interaction::).
 274
 275 `--enable-brace-expansion'
 276      Include `csh'-like brace expansion ( `b{a,b}c' ==> `bac bbc' ).
 277      See *Note Brace Expansion::, for a complete description.
 278
 279 `--enable-command-timing'
 280      Include support for recognizing `time' as a reserved word and for
 281      displaying timing statistics for the pipeline following `time'
 282      (*note Pipelines::).  This allows pipelines as well as shell
 283      builtins and functions to be timed.
 284
 285 `--enable-cond-command'
 286      Include support for the `[[' conditional command.  (*note
 287      Conditional Constructs::).
 288
 289 `--enable-cond-regexp'
 290      Include support for matching POSIX regular expressions using the
 291      `=~' binary operator in the `[[' conditional command.  (*note
 292      Conditional Constructs::).
 293
 294 `--enable-directory-stack'
 295      Include support for a `csh'-like directory stack and the `pushd',
 296      `popd', and `dirs' builtins (*note The Directory Stack::).
 297
 298 `--enable-disabled-builtins'
 299      Allow builtin commands to be invoked via `builtin xxx' even after
 300      `xxx' has been disabled using `enable -n xxx'.  See *Note Bash
 301      Builtins::, for details of the `builtin' and `enable' builtin
 302      commands.
 303
 304 `--enable-dparen-arithmetic'
 305      Include support for the `((...))' command (*note Conditional
 306      Constructs::).
 307
 308 `--enable-extended-glob'
 309      Include support for the extended pattern matching features
 310      described above under *Note Pattern Matching::.
 311
 312 `--enable-help-builtin'
 313      Include the `help' builtin, which displays help on shell builtins
 314      and variables (*note Bash Builtins::).
 315
 316 `--enable-history'
 317      Include command history and the `fc' and `history' builtin
 318      commands (*note Bash History Facilities::).
 319
 320 `--enable-job-control'
 321      This enables the job control features (*note Job Control::), if
 322      the operating system supports them.
 323
 324 `--enable-multibyte'
 325      This enables support for multibyte characters if the operating
 326      system provides the necessary support.
 327
 328 `--enable-net-redirections'
 329      This enables the special handling of filenames of the form
 330      `/dev/tcp/HOST/PORT' and `/dev/udp/HOST/PORT' when used in
 331      redirections (*note Redirections::).
 332
 333 `--enable-process-substitution'
 334      This enables process substitution (*note Process Substitution::) if
 335      the operating system provides the necessary support.
 336
 337 `--enable-prompt-string-decoding'
 338      Turn on the interpretation of a number of backslash-escaped
 339      characters in the `$PS1', `$PS2', `$PS3', and `$PS4' prompt
 340      strings.  See *Note Printing a Prompt::, for a complete list of
 341      prompt string escape sequences.
 342
 343 `--enable-progcomp'
 344      Enable the programmable completion facilities (*note Programmable
 345      Completion::).  If Readline is not enabled, this option has no
 346      effect.
 347
 348 `--enable-readline'
 349      Include support for command-line editing and history with the Bash
 350      version of the Readline library (*note Command Line Editing::).
 351
 352 `--enable-restricted'
 353      Include support for a "restricted shell".  If this is enabled,
 354      Bash, when called as `rbash', enters a restricted mode.  See *Note
 355      The Restricted Shell::, for a description of restricted mode.
 356
 357 `--enable-select'
 358      Include the `select' builtin, which allows the generation of simple
 359      menus (*note Conditional Constructs::).
 360
 361 `--enable-usg-echo-default'
 362      A synonym for `--enable-xpg-echo-default'.
 363
 364 `--enable-xpg-echo-default'
 365      Make the `echo' builtin expand backslash-escaped characters by
 366      default, without requiring the `-e' option.  This sets the default
 367      value of the `xpg_echo' shell option to `on', which makes the Bash
 368      `echo' behave more like the version specified in the Single Unix
 369      Specification, version 2.  *Note Bash Builtins::, for a
 370      description of the escape sequences that `echo' recognizes.
 371
 372 The file `config-top.h' contains C Preprocessor `#define' statements
 373 for options which are not settable from `configure'.  Some of these are
 374 not meant to be changed; beware of the consequences if you do.  Read
 375 the comments associated with each definition for more information about
 376 its effect.