-# Copyright 1999-2012 Free Software Foundation, Inc.
+# Copyright 1999-2019 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
-# are we on a target board? If so, don't run these tests.
-# note: this is necessary because we cannot use runto_main (which would
-# work for remote targets too) because of the different prompt we get
-# when using annotation level 2.
+# This testcase cannot use runto_main because of the different prompt
+# we get when using annotation level 2.
#
-if [is_remote target] then {
+if ![target_can_use_run_cmd] {
return 0
}
+set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n"
#
# test running programs
#
-set testfile "annota1"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
+standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
- untested annota1.exp
+ untested "failed to compile"
return -1
}
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-#
-# the line at which break main will put the breakpoint
-#
-set main_line 32
+clean_restart ${binfile}
# The commands we test here produce many lines of output; disable "press
# <return> to continue" prompts.
gdb_test_no_output "set height 0"
#
-# break at main
+# break in main
#
-gdb_test "break main" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
+
+set main_line [gdb_get_line_number "break main"]
+
+gdb_test "break ${srcfile}:${main_line}" \
+ "Breakpoint.*at.* file .*$srcfile, line $main_line\\." \
"breakpoint main"
#exp_internal 1
set binexp [string_to_regexp $binfile]
gdb_test_multiple "run" "run until main breakpoint" {
- -re "\r\n\032\032post-prompt\r\nStarting program: $binexp \(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped.*$gdb_prompt$" {
- pass "run until main breakpoint"
+ -re [join { "\r\n\032\032post-prompt\r\nStarting program: $binexp " \
+ "\(\(\r\nReading \[^\r\n\]+\)|\(\r\nwarning: File transfers from remote targets can be slow\[^\r\n\]+\)\)*" \
+ "\(\r\nwarning: Skipping \[^\r\n\]+ .gdb_index section in \[^\r\n\]+\r\nDo \"set use-deprecated-index-sections on\" before the file is read\r\nto use the section anyway\\.\)?" \
+ "\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n" \
+ "\032\032starting\(\(\r\nReading \[^\r\n\]+\)|\(\r\nwarning: File transfers from remote targets can be slow\[^\r\n\]+\)\)*" \
+ "\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n" \
+ "\032\032breakpoint 1\r\n\r\n" \
+ "Breakpoint 1, \r\n" \
+ "\032\032frame-begin 0 $hex\r\n\r\n" \
+ "\032\032frame-function-name\r\n" \
+ "main\r\n" \
+ "\032\032frame-args\r\n \\(\\)\r\n" \
+ "\032\032frame-source-begin\r\n at \r\n" \
+ "\032\032frame-source-file\r\n.*annota1.c\r\n" \
+ "\032\032frame-source-file-end\r\n:\r\n" \
+ "\032\032frame-source-line\r\n$main_line\r\n" \
+ "\032\032frame-source-end\r\n\r\n\r\n" \
+ "\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n" \
+ "\032\032frame-end\r\n\r\n" \
+ "\032\032stopped.*$gdb_prompt$" } ] {
+ pass "run until main breakpoint"
}
}
#exp_internal 0
# we can test annotate-signal-handler-caller
#
gdb_test_multiple "break handle_USR1" "break handle_USR1" {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
pass "break handle_USR1"
}
}
# break at printf. When we are stopped at printf, we can test
#
gdb_test_multiple "break printf" "break printf" {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex.*\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
pass "break printf"
}
-re "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
#
# get to printf
#
-set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n"
+set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n${breakpoints_invalid}"
set pat_adjust "warning: Breakpoint 3 address previously adjusted from $hex to $hex.\r\n"
set pat_end "\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*.*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$"
unsupported "backtrace @ signal handler"
} else {
gdb_test_multiple "signal SIGUSR1" "send SIGUSR1" {
- -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n$decimal\[^\r\n\]+\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
pass "send SIGUSR1"
}
- -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n$decimal\[^\r\n\]+\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
setup_xfail "*-*-*" 1270
fail "send SIGUSR1"
}
# delete all the breakpoints
#
gdb_test_multiple "delete 1" "delete bp 1" {
- -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
pass "delete bp 1"
}
}
gdb_test_multiple "delete 2" "delete bp 2" {
- -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
pass "delete bp 2"
}
}
gdb_test_multiple "delete 3" "delete bp 3" {
- -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+ -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
pass "delete bp 3"
}
}
#
-# break at main, after value is initialized. This is in preparation
+# break in main, after value is initialized. This is in preparation
# to test the annotate output for the display command.
#
-gdb_test_multiple "break main" "break at 28" {
- -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" {
- pass "break at 28"
+set test "break in main"
+gdb_test_multiple "break ${srcfile}:${main_line}" $test {
+ -re "post-prompt.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" {
+ pass $test
}
- -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" {
+ -re "post-prompt.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" {
setup_xfail "*-*-*" 1270
- fail "break at 28"
+ fail $test
}
}
# Test that breakpoints-invalid is issued once and only once for
# breakpoint ignore count changes, after annotation stopped.
#
-gdb_test_multiple "break 46" "break at 46" {
- -re "Breakpoint 5 at $hex: file .*$srcfile, line 46.*$gdb_prompt$" {
- pass "break at 46"
+
+set value_inc_line [gdb_get_line_number "increment value"]
+
+gdb_test_multiple "break $value_inc_line" "break at value++" {
+ -re "Breakpoint 5 at $hex: file .*$srcfile, line $value_inc_line.*$gdb_prompt$" {
+ pass "break at value++"
}
}
}
gdb_test_multiple "continue" "annotate ignore count change" {
- -re ".*$srcfile:46:.*\032\032stopped\r\n\r\n\032\032breakpoints-invalid\r\n$gdb_prompt$" {
+ -re ".*breakpoints-invalid.*breakpoints-invalid.*$gdb_prompt$" {
+ fail "annotate ignore count change"
+ }
+ -re ".*$srcfile:$value_inc_line:.*\032\032stopped\r\n$gdb_prompt$" {
pass "annotate ignore count change"
}
}
}
}
+set after_loop_line [gdb_get_line_number "after loop"]
+
gdb_test_multiple "next" "breakpoint ignore count" {
- -re ".*$srcfile:49:.*$gdb_prompt$" {
+ -re ".*$srcfile:$after_loop_line:.*$gdb_prompt$" {
pass "breakpoint ignore count"
}
}
# annotate-signal-string-end
# FIXME: annotate-signal not tested (requires that the inferior be
# stopped by a "random" signal)
-#
-# SIGTRAP signals are dropped before they get to the inferior process
-# on hpux11. In theory, this behaivor can be controlled by setting
-# TTEO_NORM_SIGTRAP in the inferior, but doing so did not cause
-# the signal to be properly delivered.
-#
-# It has been verified that other signals will be delivered. However,
-# rather than twiddle the test, I choose to leave it as-is as it
-# exposes an interesting failure on hpux11.
if [target_info exists gdb,nosignals] {
unsupported "signal sent"
} else {
- setup_xfail hppa*-*-hpux11*
gdb_test_multiple "signal SIGTRAP" "signal sent" {
- -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+ -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032thread-exited,id=\"${decimal}\",group-id=\"i${decimal}\"\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
pass "signal sent"
}
}
}
proc thread_test {} {
- global objdir subdir srcdir testfile
+ global subdir srcdir testfile srcfile binfile
global gdb_prompt old_gdb_prompt
+ global decimal
set srcfile watch_thread_num.c
- set binfile ${objdir}/${subdir}/${testfile}-watch_thread_num
+ set binfile [standard_output_file ${testfile}-watch_thread_num]
set gdb_prompt $old_gdb_prompt
- if { ![get_compiler_info ${binfile}] && [gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] == "" } {
+ if { ![get_compiler_info] && [gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] == "" } {
gdb_exit
gdb_start
return
}
+ set linenum [gdb_get_line_number "all threads started"]
+ gdb_breakpoint "$linenum"
+
+ set linenum [gdb_get_line_number "first child thread exited"]
+ gdb_breakpoint "$linenum"
+
set gdb_prompt \
"\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
}
}
- gdb_test_multiple "next 2" "new thread" {
- -re ".*\032\032new-thread" {
+ gdb_test_multiple "continue" "new thread" {
+ -re "\032\032new-thread.*\r\n$gdb_prompt$" {
pass "new thread"
}
}
+
+ gdb_test_multiple "continue" "thread exit" {
+ -re "\032\032thread-exited,id=\"${decimal}\",group-id=\"i${decimal}\".*\r\n$gdb_prompt$" {
+ pass "thread exit"
+ }
+ }
}
}