]>
Commit | Line | Data |
---|---|---|
75bd9771 | 1 | /* |
07623986 | 2 | * LIBUSB interface code for CUPS. |
75bd9771 | 3 | * |
f81d6520 | 4 | * Copyright 2007-2015 by Apple Inc. |
75bd9771 | 5 | * |
07623986 MS |
6 | * These coded instructions, statements, and computer programs are the |
7 | * property of Apple Inc. and are protected by Federal copyright | |
8 | * law. Distribution and use rights are outlined in the file "LICENSE.txt" | |
9 | * which should have been included with this file. If this file is | |
57b7b66b | 10 | * missing or damaged, see the license at "http://www.cups.org/". |
75bd9771 MS |
11 | */ |
12 | ||
13 | /* | |
14 | * Include necessary headers... | |
15 | */ | |
16 | ||
12f89d24 | 17 | #include <libusb.h> |
39ff2fe7 | 18 | #include <cups/cups-private.h> |
3867aed5 | 19 | #include <cups/ppd-private.h> |
f8f52a90 | 20 | #include <cups/dir.h> |
12f89d24 MS |
21 | #include <pthread.h> |
22 | #include <sys/select.h> | |
23 | #include <sys/types.h> | |
24 | #include <sys/stat.h> | |
25 | #include <sys/time.h> | |
26 | #include <unistd.h> | |
27 | ||
28 | ||
29 | /* | |
30 | * WAIT_EOF_DELAY is number of seconds we'll wait for responses from | |
31 | * the printer after we've finished sending all the data | |
32 | */ | |
33 | ||
34 | #define WAIT_EOF 0 | |
35 | #define WAIT_EOF_DELAY 7 | |
36 | #define WAIT_SIDE_DELAY 3 | |
37 | #define DEFAULT_TIMEOUT 5000L | |
75bd9771 MS |
38 | |
39 | ||
40 | /* | |
41 | * Local types... | |
42 | */ | |
43 | ||
44 | typedef struct usb_printer_s /**** USB Printer Data ****/ | |
45 | { | |
12f89d24 | 46 | struct libusb_device *device; /* Device info */ |
75bd9771 | 47 | int conf, /* Configuration */ |
37e7e6e0 | 48 | origconf, /* Original configuration */ |
75bd9771 MS |
49 | iface, /* Interface */ |
50 | altset, /* Alternate setting */ | |
51 | write_endp, /* Write endpoint */ | |
37e7e6e0 | 52 | read_endp, /* Read endpoint */ |
12f89d24 | 53 | protocol, /* Protocol: 1 = Uni-di, 2 = Bi-di. */ |
37e7e6e0 | 54 | usblp_attached, /* "usblp" kernel module attached? */ |
89a65306 MS |
55 | reset_after_job;/* Set to 1 by print_device() */ |
56 | unsigned quirks; /* Quirks flags */ | |
12f89d24 | 57 | struct libusb_device_handle *handle; /* Open handle to device */ |
75bd9771 MS |
58 | } usb_printer_t; |
59 | ||
60 | typedef int (*usb_cb_t)(usb_printer_t *, const char *, const char *, | |
61 | const void *); | |
62 | ||
89a65306 | 63 | typedef struct usb_globals_s /* Global USB printer information */ |
12f89d24 MS |
64 | { |
65 | usb_printer_t *printer; /* Printer */ | |
66 | ||
67 | pthread_mutex_t read_thread_mutex; | |
68 | pthread_cond_t read_thread_cond; | |
69 | int read_thread_stop; | |
70 | int read_thread_done; | |
71 | ||
72 | pthread_mutex_t readwrite_lock_mutex; | |
73 | pthread_cond_t readwrite_lock_cond; | |
74 | int readwrite_lock; | |
75 | ||
76 | int print_fd; /* File descriptor to print */ | |
77 | ssize_t print_bytes; /* Print bytes read */ | |
78 | ||
79 | int wait_eof; | |
80 | int drain_output; /* Drain all pending output */ | |
81 | int bidi_flag; /* 0=unidirectional, 1=bidirectional */ | |
82 | ||
83 | pthread_mutex_t sidechannel_thread_mutex; | |
84 | pthread_cond_t sidechannel_thread_cond; | |
85 | int sidechannel_thread_stop; | |
86 | int sidechannel_thread_done; | |
87 | } usb_globals_t; | |
88 | ||
37e7e6e0 | 89 | /* |
89a65306 | 90 | * Quirks: various printer quirks are handled by this structure and its flags. |
37e7e6e0 | 91 | * |
89a65306 MS |
92 | * The quirks table used to be compiled into the backend but is now loaded from |
93 | * one or more files in the /usr/share/cups/usb directory. | |
37e7e6e0 MS |
94 | */ |
95 | ||
89a65306 MS |
96 | #define USB_QUIRK_BLACKLIST 0x0001 /* Does not conform to the spec */ |
97 | #define USB_QUIRK_NO_REATTACH 0x0002 /* After printing we cannot re-attach | |
37e7e6e0 | 98 | the usblp kernel module */ |
89a65306 MS |
99 | #define USB_QUIRK_SOFT_RESET 0x0004 /* After printing do a soft reset |
100 | for clean-up */ | |
101 | #define USB_QUIRK_UNIDIR 0x0008 /* Requires unidirectional mode */ | |
102 | #define USB_QUIRK_USB_INIT 0x0010 /* Needs vendor USB init string */ | |
103 | #define USB_QUIRK_VENDOR_CLASS 0x0020 /* Descriptor uses vendor-specific | |
104 | Class or SubClass */ | |
f81d6520 | 105 | #define USB_QUIRK_DELAY_CLOSE 0x0040 /* Delay close */ |
89a65306 MS |
106 | #define USB_QUIRK_WHITELIST 0x0000 /* no quirks */ |
107 | ||
108 | ||
109 | typedef struct usb_quirk_s /* USB "quirk" information */ | |
110 | { | |
111 | int vendor_id, /* Affected vendor ID */ | |
112 | product_id; /* Affected product ID or 0 for all */ | |
113 | unsigned quirks; /* Quirks bitfield */ | |
114 | } usb_quirk_t; | |
115 | ||
37e7e6e0 | 116 | |
37e7e6e0 | 117 | |
12f89d24 MS |
118 | |
119 | /* | |
120 | * Globals... | |
121 | */ | |
122 | ||
89a65306 | 123 | cups_array_t *all_quirks; /* Array of printer quirks */ |
12f89d24 | 124 | usb_globals_t g = { 0 }; /* Globals */ |
f8f52a90 | 125 | libusb_device **all_list; /* List of connected USB devices */ |
12f89d24 | 126 | |
75bd9771 MS |
127 | |
128 | /* | |
129 | * Local functions... | |
130 | */ | |
131 | ||
132 | static int close_device(usb_printer_t *printer); | |
89a65306 | 133 | static int compare_quirks(usb_quirk_t *a, usb_quirk_t *b); |
75bd9771 | 134 | static usb_printer_t *find_device(usb_cb_t cb, const void *data); |
89a65306 | 135 | static unsigned find_quirks(int vendor_id, int product_id); |
75bd9771 MS |
136 | static int get_device_id(usb_printer_t *printer, char *buffer, |
137 | size_t bufsize); | |
138 | static int list_cb(usb_printer_t *printer, const char *device_uri, | |
139 | const char *device_id, const void *data); | |
89a65306 | 140 | static void load_quirks(void); |
75bd9771 MS |
141 | static char *make_device_uri(usb_printer_t *printer, |
142 | const char *device_id, | |
143 | char *uri, size_t uri_size); | |
144 | static int open_device(usb_printer_t *printer, int verbose); | |
145 | static int print_cb(usb_printer_t *printer, const char *device_uri, | |
146 | const char *device_id, const void *data); | |
12f89d24 MS |
147 | static void *read_thread(void *reference); |
148 | static void *sidechannel_thread(void *reference); | |
149 | static void soft_reset(void); | |
89a65306 | 150 | static int soft_reset_printer(usb_printer_t *printer); |
75bd9771 MS |
151 | |
152 | ||
153 | /* | |
154 | * 'list_devices()' - List the available printers. | |
155 | */ | |
156 | ||
157 | void | |
158 | list_devices(void) | |
159 | { | |
f8f52a90 MS |
160 | load_quirks(); |
161 | ||
75bd9771 MS |
162 | fputs("DEBUG: list_devices\n", stderr); |
163 | find_device(list_cb, NULL); | |
164 | } | |
165 | ||
166 | ||
167 | /* | |
168 | * 'print_device()' - Print a file to a USB device. | |
169 | */ | |
170 | ||
171 | int /* O - Exit status */ | |
172 | print_device(const char *uri, /* I - Device URI */ | |
173 | const char *hostname, /* I - Hostname/manufacturer */ | |
174 | const char *resource, /* I - Resource/modelname */ | |
175 | char *options, /* I - Device options/serial number */ | |
176 | int print_fd, /* I - File descriptor to print */ | |
177 | int copies, /* I - Copies to print */ | |
178 | int argc, /* I - Number of command-line arguments (6 or 7) */ | |
179 | char *argv[]) /* I - Command-line arguments */ | |
180 | { | |
12f89d24 MS |
181 | int bytes; /* Bytes written */ |
182 | ssize_t total_bytes; /* Total bytes written */ | |
75bd9771 | 183 | struct sigaction action; /* Actions for POSIX signals */ |
12f89d24 MS |
184 | int status = CUPS_BACKEND_OK, |
185 | /* Function results */ | |
186 | iostatus; /* Current IO status */ | |
187 | pthread_t read_thread_id, /* Read thread */ | |
188 | sidechannel_thread_id; /* Side-channel thread */ | |
37e7e6e0 MS |
189 | int have_sidechannel = 0, /* Was the side-channel thread started? */ |
190 | have_backchannel = 0; /* Do we have a back channel? */ | |
12f89d24 MS |
191 | struct stat sidechannel_info; /* Side-channel file descriptor info */ |
192 | unsigned char print_buffer[8192], /* Print data buffer */ | |
193 | *print_ptr; /* Pointer into print data buffer */ | |
194 | fd_set input_set; /* Input set for select() */ | |
195 | int nfds; /* Number of file descriptors */ | |
196 | struct timeval *timeout, /* Timeout pointer */ | |
197 | tv; /* Time value */ | |
198 | struct timespec cond_timeout; /* pthread condition timeout */ | |
37e7e6e0 MS |
199 | int num_opts; /* Number of options */ |
200 | cups_option_t *opts; /* Options */ | |
201 | const char *val; /* Option value */ | |
75bd9771 MS |
202 | |
203 | ||
f8f52a90 MS |
204 | load_quirks(); |
205 | ||
12f89d24 MS |
206 | /* |
207 | * See if the side-channel descriptor is valid... | |
208 | */ | |
209 | ||
210 | have_sidechannel = !fstat(CUPS_SC_FD, &sidechannel_info) && | |
211 | S_ISSOCK(sidechannel_info.st_mode); | |
212 | ||
213 | g.wait_eof = WAIT_EOF; | |
75bd9771 MS |
214 | |
215 | /* | |
216 | * Connect to the printer... | |
217 | */ | |
218 | ||
37e7e6e0 | 219 | fprintf(stderr, "DEBUG: Printing on printer with URI: %s\n", uri); |
12f89d24 | 220 | while ((g.printer = find_device(print_cb, uri)) == NULL) |
75bd9771 | 221 | { |
0837b7e8 MS |
222 | _cupsLangPrintFilter(stderr, "INFO", |
223 | _("Waiting for printer to become available.")); | |
75bd9771 MS |
224 | sleep(5); |
225 | } | |
226 | ||
12f89d24 | 227 | g.print_fd = print_fd; |
75bd9771 | 228 | |
37e7e6e0 MS |
229 | /* |
230 | * Some devices need a reset after finishing a job, these devices are | |
89a65306 | 231 | * marked with the USB_QUIRK_SOFT_RESET quirk. |
37e7e6e0 | 232 | */ |
89a65306 | 233 | g.printer->reset_after_job = (g.printer->quirks & USB_QUIRK_SOFT_RESET ? 1 : 0); |
37e7e6e0 | 234 | |
75bd9771 MS |
235 | /* |
236 | * If we are printing data from a print driver on stdin, ignore SIGTERM | |
237 | * so that the driver can finish out any page data, e.g. to eject the | |
238 | * current page. We only do this for stdin printing as otherwise there | |
239 | * is no way to cancel a raw print job... | |
240 | */ | |
241 | ||
242 | if (!print_fd) | |
243 | { | |
244 | memset(&action, 0, sizeof(action)); | |
245 | ||
246 | sigemptyset(&action.sa_mask); | |
247 | action.sa_handler = SIG_IGN; | |
248 | sigaction(SIGTERM, &action, NULL); | |
249 | } | |
250 | ||
12f89d24 MS |
251 | /* |
252 | * Start the side channel thread if the descriptor is valid... | |
253 | */ | |
254 | ||
255 | pthread_mutex_init(&g.readwrite_lock_mutex, NULL); | |
256 | pthread_cond_init(&g.readwrite_lock_cond, NULL); | |
257 | g.readwrite_lock = 1; | |
258 | ||
259 | if (have_sidechannel) | |
260 | { | |
261 | g.sidechannel_thread_stop = 0; | |
262 | g.sidechannel_thread_done = 0; | |
263 | ||
264 | pthread_cond_init(&g.sidechannel_thread_cond, NULL); | |
265 | pthread_mutex_init(&g.sidechannel_thread_mutex, NULL); | |
266 | ||
267 | if (pthread_create(&sidechannel_thread_id, NULL, sidechannel_thread, NULL)) | |
268 | { | |
269 | fprintf(stderr, "DEBUG: Fatal USB error.\n"); | |
270 | _cupsLangPrintFilter(stderr, "ERROR", | |
271 | _("There was an unrecoverable USB error.")); | |
272 | fputs("DEBUG: Couldn't create side-channel thread.\n", stderr); | |
273 | close_device(g.printer); | |
274 | return (CUPS_BACKEND_STOP); | |
275 | } | |
276 | } | |
277 | ||
278 | /* | |
37e7e6e0 MS |
279 | * Debug mode: If option "usb-unidir" is given, always deactivate |
280 | * backchannel | |
12f89d24 MS |
281 | */ |
282 | ||
37e7e6e0 MS |
283 | num_opts = cupsParseOptions(argv[5], 0, &opts); |
284 | val = cupsGetOption("usb-unidir", num_opts, opts); | |
285 | if (val && strcasecmp(val, "no") && strcasecmp(val, "off") && | |
286 | strcasecmp(val, "false")) | |
287 | { | |
288 | g.printer->read_endp = -1; | |
289 | fprintf(stderr, "DEBUG: Forced uni-directional communication " | |
290 | "via \"usb-unidir\" option.\n"); | |
291 | } | |
12f89d24 | 292 | |
37e7e6e0 MS |
293 | /* |
294 | * Debug mode: If option "usb-no-reattach" is given, do not re-attach | |
295 | * the usblp kernel module after the job has completed. | |
296 | */ | |
12f89d24 | 297 | |
37e7e6e0 MS |
298 | val = cupsGetOption("usb-no-reattach", num_opts, opts); |
299 | if (val && strcasecmp(val, "no") && strcasecmp(val, "off") && | |
300 | strcasecmp(val, "false")) | |
12f89d24 | 301 | { |
37e7e6e0 MS |
302 | g.printer->usblp_attached = 0; |
303 | fprintf(stderr, "DEBUG: Forced not re-attaching the usblp kernel module " | |
304 | "after the job via \"usb-no-reattach\" option.\n"); | |
12f89d24 MS |
305 | } |
306 | ||
37e7e6e0 MS |
307 | /* |
308 | * Get the read thread going... | |
309 | */ | |
310 | ||
311 | if (g.printer->read_endp != -1) | |
312 | { | |
313 | have_backchannel = 1; | |
314 | ||
315 | g.read_thread_stop = 0; | |
316 | g.read_thread_done = 0; | |
317 | ||
318 | pthread_cond_init(&g.read_thread_cond, NULL); | |
319 | pthread_mutex_init(&g.read_thread_mutex, NULL); | |
320 | ||
321 | if (pthread_create(&read_thread_id, NULL, read_thread, NULL)) | |
322 | { | |
323 | fprintf(stderr, "DEBUG: Fatal USB error.\n"); | |
324 | _cupsLangPrintFilter(stderr, "ERROR", | |
325 | _("There was an unrecoverable USB error.")); | |
326 | fputs("DEBUG: Couldn't create read thread.\n", stderr); | |
327 | close_device(g.printer); | |
328 | return (CUPS_BACKEND_STOP); | |
329 | } | |
330 | } | |
331 | else | |
332 | fprintf(stderr, "DEBUG: Uni-directional device/mode, back channel " | |
333 | "deactivated.\n"); | |
334 | ||
12f89d24 MS |
335 | /* |
336 | * The main thread sends the print file... | |
337 | */ | |
75bd9771 | 338 | |
12f89d24 MS |
339 | g.drain_output = 0; |
340 | g.print_bytes = 0; | |
341 | total_bytes = 0; | |
342 | print_ptr = print_buffer; | |
005dd1eb | 343 | |
12f89d24 | 344 | while (status == CUPS_BACKEND_OK && copies-- > 0) |
75bd9771 | 345 | { |
12f89d24 | 346 | _cupsLangPrintFilter(stderr, "INFO", _("Sending data to printer.")); |
75bd9771 | 347 | |
12f89d24 | 348 | if (print_fd != STDIN_FILENO) |
75bd9771 MS |
349 | { |
350 | fputs("PAGE: 1 1\n", stderr); | |
351 | lseek(print_fd, 0, SEEK_SET); | |
352 | } | |
353 | ||
12f89d24 | 354 | while (status == CUPS_BACKEND_OK) |
75bd9771 | 355 | { |
12f89d24 MS |
356 | FD_ZERO(&input_set); |
357 | ||
358 | if (!g.print_bytes) | |
359 | FD_SET(print_fd, &input_set); | |
360 | ||
361 | /* | |
362 | * Calculate select timeout... | |
363 | * If we have data waiting to send timeout is 100ms. | |
364 | * else if we're draining print_fd timeout is 0. | |
365 | * else we're waiting forever... | |
366 | */ | |
367 | ||
368 | if (g.print_bytes) | |
369 | { | |
370 | tv.tv_sec = 0; | |
371 | tv.tv_usec = 100000; /* 100ms */ | |
372 | timeout = &tv; | |
373 | } | |
374 | else if (g.drain_output) | |
375 | { | |
376 | tv.tv_sec = 0; | |
377 | tv.tv_usec = 0; | |
378 | timeout = &tv; | |
379 | } | |
380 | else | |
381 | timeout = NULL; | |
382 | ||
383 | /* | |
384 | * I/O is unlocked around select... | |
385 | */ | |
386 | ||
387 | pthread_mutex_lock(&g.readwrite_lock_mutex); | |
388 | g.readwrite_lock = 0; | |
389 | pthread_cond_signal(&g.readwrite_lock_cond); | |
390 | pthread_mutex_unlock(&g.readwrite_lock_mutex); | |
391 | ||
392 | nfds = select(print_fd + 1, &input_set, NULL, NULL, timeout); | |
393 | ||
394 | /* | |
395 | * Reacquire the lock... | |
396 | */ | |
397 | ||
398 | pthread_mutex_lock(&g.readwrite_lock_mutex); | |
399 | while (g.readwrite_lock) | |
400 | pthread_cond_wait(&g.readwrite_lock_cond, &g.readwrite_lock_mutex); | |
401 | g.readwrite_lock = 1; | |
402 | pthread_mutex_unlock(&g.readwrite_lock_mutex); | |
403 | ||
404 | if (nfds < 0) | |
405 | { | |
406 | if (errno == EINTR && total_bytes == 0) | |
407 | { | |
408 | fputs("DEBUG: Received an interrupt before any bytes were " | |
409 | "written, aborting.\n", stderr); | |
410 | close_device(g.printer); | |
411 | return (CUPS_BACKEND_OK); | |
412 | } | |
413 | else if (errno != EAGAIN && errno != EINTR) | |
414 | { | |
415 | _cupsLangPrintFilter(stderr, "ERROR", | |
416 | _("Unable to read print data.")); | |
417 | perror("DEBUG: select"); | |
418 | close_device(g.printer); | |
419 | return (CUPS_BACKEND_FAILED); | |
420 | } | |
421 | } | |
422 | ||
423 | /* | |
424 | * If drain output has finished send a response... | |
425 | */ | |
426 | ||
427 | if (g.drain_output && !nfds && !g.print_bytes) | |
428 | { | |
429 | /* Send a response... */ | |
430 | cupsSideChannelWrite(CUPS_SC_CMD_DRAIN_OUTPUT, CUPS_SC_STATUS_OK, NULL, 0, 1.0); | |
431 | g.drain_output = 0; | |
432 | } | |
433 | ||
18ecb428 | 434 | /* |
12f89d24 | 435 | * Check if we have print data ready... |
18ecb428 MS |
436 | */ |
437 | ||
12f89d24 | 438 | if (FD_ISSET(print_fd, &input_set)) |
75bd9771 | 439 | { |
12f89d24 MS |
440 | g.print_bytes = read(print_fd, print_buffer, sizeof(print_buffer)); |
441 | ||
442 | if (g.print_bytes < 0) | |
005dd1eb | 443 | { |
12f89d24 MS |
444 | /* |
445 | * Read error - bail if we don't see EAGAIN or EINTR... | |
446 | */ | |
447 | ||
448 | if (errno != EAGAIN && errno != EINTR) | |
005dd1eb | 449 | { |
0837b7e8 | 450 | _cupsLangPrintFilter(stderr, "ERROR", |
12f89d24 MS |
451 | _("Unable to read print data.")); |
452 | perror("DEBUG: read"); | |
453 | close_device(g.printer); | |
454 | return (CUPS_BACKEND_FAILED); | |
005dd1eb MS |
455 | } |
456 | ||
12f89d24 | 457 | g.print_bytes = 0; |
005dd1eb | 458 | } |
12f89d24 MS |
459 | else if (g.print_bytes == 0) |
460 | { | |
461 | /* | |
462 | * End of file, break out of the loop... | |
463 | */ | |
464 | ||
005dd1eb | 465 | break; |
12f89d24 MS |
466 | } |
467 | ||
468 | print_ptr = print_buffer; | |
469 | ||
470 | fprintf(stderr, "DEBUG: Read %d bytes of print data...\n", | |
471 | (int)g.print_bytes); | |
75bd9771 MS |
472 | } |
473 | ||
12f89d24 | 474 | if (g.print_bytes) |
18ecb428 | 475 | { |
12f89d24 MS |
476 | iostatus = libusb_bulk_transfer(g.printer->handle, |
477 | g.printer->write_endp, | |
478 | print_buffer, g.print_bytes, | |
3af9ac9e | 479 | &bytes, 0); |
12f89d24 MS |
480 | /* |
481 | * Ignore timeout errors, but retain the number of bytes written to | |
482 | * avoid sending duplicate data... | |
483 | */ | |
484 | ||
485 | if (iostatus == LIBUSB_ERROR_TIMEOUT) | |
486 | { | |
487 | fputs("DEBUG: Got USB transaction timeout during write.\n", stderr); | |
488 | iostatus = 0; | |
489 | } | |
490 | ||
491 | /* | |
492 | * If we've stalled, retry the write... | |
493 | */ | |
494 | ||
495 | else if (iostatus == LIBUSB_ERROR_PIPE) | |
496 | { | |
497 | fputs("DEBUG: Got USB pipe stalled during write.\n", stderr); | |
498 | ||
499 | iostatus = libusb_bulk_transfer(g.printer->handle, | |
500 | g.printer->write_endp, | |
501 | print_buffer, g.print_bytes, | |
3af9ac9e | 502 | &bytes, 0); |
12f89d24 MS |
503 | } |
504 | ||
505 | /* | |
506 | * Retry a write after an aborted write since we probably just got | |
507 | * SIGTERM... | |
508 | */ | |
509 | ||
510 | else if (iostatus == LIBUSB_ERROR_INTERRUPTED) | |
511 | { | |
512 | fputs("DEBUG: Got USB return aborted during write.\n", stderr); | |
513 | ||
514 | iostatus = libusb_bulk_transfer(g.printer->handle, | |
515 | g.printer->write_endp, | |
516 | print_buffer, g.print_bytes, | |
3af9ac9e | 517 | &bytes, 0); |
12f89d24 MS |
518 | } |
519 | ||
520 | if (iostatus) | |
521 | { | |
522 | /* | |
523 | * Write error - bail if we don't see an error we can retry... | |
524 | */ | |
525 | ||
526 | _cupsLangPrintFilter(stderr, "ERROR", | |
527 | _("Unable to send data to printer.")); | |
528 | fprintf(stderr, "DEBUG: libusb write operation returned %x.\n", | |
529 | iostatus); | |
530 | ||
531 | status = CUPS_BACKEND_FAILED; | |
532 | break; | |
533 | } | |
534 | else if (bytes > 0) | |
535 | { | |
536 | fprintf(stderr, "DEBUG: Wrote %d bytes of print data...\n", | |
537 | (int)bytes); | |
538 | ||
539 | g.print_bytes -= bytes; | |
540 | print_ptr += bytes; | |
541 | total_bytes += bytes; | |
542 | } | |
18ecb428 | 543 | } |
12f89d24 MS |
544 | |
545 | if (print_fd != 0 && status == CUPS_BACKEND_OK) | |
546 | fprintf(stderr, "DEBUG: Sending print file, " CUPS_LLFMT " bytes...\n", | |
547 | CUPS_LLCAST total_bytes); | |
75bd9771 MS |
548 | } |
549 | } | |
550 | ||
12f89d24 MS |
551 | fprintf(stderr, "DEBUG: Sent " CUPS_LLFMT " bytes...\n", |
552 | CUPS_LLCAST total_bytes); | |
553 | ||
75bd9771 | 554 | /* |
12f89d24 | 555 | * Signal the side channel thread to exit... |
75bd9771 MS |
556 | */ |
557 | ||
12f89d24 MS |
558 | if (have_sidechannel) |
559 | { | |
560 | close(CUPS_SC_FD); | |
561 | pthread_mutex_lock(&g.readwrite_lock_mutex); | |
562 | g.readwrite_lock = 0; | |
563 | pthread_cond_signal(&g.readwrite_lock_cond); | |
564 | pthread_mutex_unlock(&g.readwrite_lock_mutex); | |
565 | ||
566 | g.sidechannel_thread_stop = 1; | |
567 | pthread_mutex_lock(&g.sidechannel_thread_mutex); | |
568 | ||
569 | if (!g.sidechannel_thread_done) | |
570 | { | |
571 | gettimeofday(&tv, NULL); | |
572 | cond_timeout.tv_sec = tv.tv_sec + WAIT_SIDE_DELAY; | |
573 | cond_timeout.tv_nsec = tv.tv_usec * 1000; | |
75bd9771 | 574 | |
12f89d24 MS |
575 | while (!g.sidechannel_thread_done) |
576 | { | |
577 | if (pthread_cond_timedwait(&g.sidechannel_thread_cond, | |
578 | &g.sidechannel_thread_mutex, | |
579 | &cond_timeout) != 0) | |
580 | break; | |
581 | } | |
582 | } | |
583 | ||
584 | pthread_mutex_unlock(&g.sidechannel_thread_mutex); | |
585 | } | |
586 | ||
587 | /* | |
588 | * Signal the read thread to exit then wait 7 seconds for it to complete... | |
589 | */ | |
590 | ||
37e7e6e0 | 591 | if (have_backchannel) |
12f89d24 | 592 | { |
37e7e6e0 | 593 | g.read_thread_stop = 1; |
12f89d24 | 594 | |
37e7e6e0 | 595 | pthread_mutex_lock(&g.read_thread_mutex); |
a29fd7dd | 596 | |
12f89d24 MS |
597 | if (!g.read_thread_done) |
598 | { | |
37e7e6e0 | 599 | fputs("DEBUG: Waiting for read thread to exit...\n", stderr); |
12f89d24 MS |
600 | |
601 | gettimeofday(&tv, NULL); | |
37e7e6e0 | 602 | cond_timeout.tv_sec = tv.tv_sec + WAIT_EOF_DELAY; |
12f89d24 | 603 | cond_timeout.tv_nsec = tv.tv_usec * 1000; |
a29fd7dd | 604 | |
12f89d24 MS |
605 | while (!g.read_thread_done) |
606 | { | |
607 | if (pthread_cond_timedwait(&g.read_thread_cond, &g.read_thread_mutex, | |
608 | &cond_timeout) != 0) | |
609 | break; | |
610 | } | |
37e7e6e0 MS |
611 | |
612 | /* | |
613 | * If it didn't exit abort the pending read and wait an additional | |
614 | * second... | |
615 | */ | |
0fa6c7fa | 616 | |
37e7e6e0 MS |
617 | if (!g.read_thread_done) |
618 | { | |
0fa6c7fa | 619 | fputs("DEBUG: Read thread still active, aborting the pending read...\n", |
37e7e6e0 MS |
620 | stderr); |
621 | ||
622 | g.wait_eof = 0; | |
623 | ||
624 | gettimeofday(&tv, NULL); | |
625 | cond_timeout.tv_sec = tv.tv_sec + 1; | |
626 | cond_timeout.tv_nsec = tv.tv_usec * 1000; | |
0fa6c7fa | 627 | |
37e7e6e0 MS |
628 | while (!g.read_thread_done) |
629 | { | |
630 | if (pthread_cond_timedwait(&g.read_thread_cond, &g.read_thread_mutex, | |
631 | &cond_timeout) != 0) | |
632 | break; | |
633 | } | |
634 | } | |
12f89d24 | 635 | } |
12f89d24 | 636 | |
37e7e6e0 MS |
637 | pthread_mutex_unlock(&g.read_thread_mutex); |
638 | } | |
12f89d24 | 639 | |
12f89d24 MS |
640 | /* |
641 | * Close the connection and input file and general clean up... | |
642 | */ | |
643 | ||
499aa6cd | 644 | if (g.printer->quirks & USB_QUIRK_DELAY_CLOSE) |
f81d6520 MS |
645 | sleep(1); |
646 | ||
12f89d24 MS |
647 | close_device(g.printer); |
648 | ||
649 | /* | |
650 | * Clean up .... | |
651 | */ | |
652 | ||
f8f52a90 | 653 | libusb_free_device_list(all_list, 1); |
12f89d24 MS |
654 | libusb_exit(NULL); |
655 | ||
656 | return (status); | |
75bd9771 MS |
657 | } |
658 | ||
659 | ||
660 | /* | |
661 | * 'close_device()' - Close the connection to the USB printer. | |
662 | */ | |
663 | ||
664 | static int /* I - 0 on success, -1 on failure */ | |
665 | close_device(usb_printer_t *printer) /* I - Printer */ | |
666 | { | |
12f89d24 MS |
667 | struct libusb_device_descriptor devdesc; |
668 | /* Current device descriptor */ | |
669 | struct libusb_config_descriptor *confptr; | |
670 | /* Pointer to current configuration */ | |
671 | ||
672 | ||
75bd9771 MS |
673 | if (printer->handle) |
674 | { | |
557dde9f MS |
675 | /* |
676 | * Release interfaces before closing so that we know all data is written | |
677 | * to the device... | |
678 | */ | |
679 | ||
37e7e6e0 MS |
680 | int errcode; /* Return value of libusb function */ |
681 | int number1, /* Interface number */ | |
682 | number2; /* Configuration number */ | |
557dde9f | 683 | |
37e7e6e0 MS |
684 | errcode = |
685 | libusb_get_config_descriptor(printer->device, printer->conf, &confptr); | |
686 | if (errcode >= 0) | |
687 | { | |
688 | number1 = confptr->interface[printer->iface]. | |
689 | altsetting[printer->altset].bInterfaceNumber; | |
690 | libusb_release_interface(printer->handle, number1); | |
691 | ||
692 | number2 = confptr->bConfigurationValue; | |
693 | ||
694 | libusb_free_config_descriptor(confptr); | |
695 | ||
696 | /* | |
697 | * If we have changed the configuration from one valid configuration | |
698 | * to another, restore the old one | |
699 | */ | |
700 | if (printer->origconf > 0 && printer->origconf != number2) | |
701 | { | |
0fa6c7fa | 702 | fprintf(stderr, "DEBUG: Restoring USB device configuration: %d -> %d\n", |
37e7e6e0 MS |
703 | number2, printer->origconf); |
704 | if ((errcode = libusb_set_configuration(printer->handle, | |
705 | printer->origconf)) < 0) | |
706 | { | |
707 | if (errcode != LIBUSB_ERROR_BUSY) | |
708 | { | |
709 | errcode = | |
710 | libusb_get_device_descriptor (printer->device, &devdesc); | |
711 | if (errcode < 0) | |
712 | fprintf(stderr, | |
713 | "DEBUG: Failed to set configuration %d\n", | |
714 | printer->origconf); | |
715 | else | |
716 | fprintf(stderr, | |
717 | "DEBUG: Failed to set configuration %d for %04x:%04x\n", | |
718 | printer->origconf, devdesc.idVendor, devdesc.idProduct); | |
719 | } | |
720 | } | |
721 | } | |
722 | ||
723 | /* | |
724 | * Re-attach "usblp" kernel module if it was attached before using this | |
725 | * device | |
726 | */ | |
727 | if (printer->usblp_attached == 1) | |
728 | if (libusb_attach_kernel_driver(printer->handle, number1) < 0) | |
729 | { | |
730 | errcode = libusb_get_device_descriptor (printer->device, &devdesc); | |
731 | if (errcode < 0) | |
732 | fprintf(stderr, | |
733 | "DEBUG: Failed to re-attach \"usblp\" kernel module\n"); | |
734 | else | |
735 | fprintf(stderr, | |
736 | "DEBUG: Failed to re-attach \"usblp\" kernel module to " | |
737 | "%04x:%04x\n", devdesc.idVendor, devdesc.idProduct); | |
738 | } | |
739 | } | |
740 | else | |
741 | fprintf(stderr, | |
742 | "DEBUG: Failed to get configuration descriptor %d\n", | |
743 | printer->conf); | |
12f89d24 MS |
744 | |
745 | /* | |
37e7e6e0 | 746 | * Reset the device to clean up after the job |
12f89d24 MS |
747 | */ |
748 | ||
37e7e6e0 | 749 | if (printer->reset_after_job == 1) |
12f89d24 | 750 | { |
37e7e6e0 MS |
751 | if ((errcode = libusb_reset_device(printer->handle)) < 0) |
752 | fprintf(stderr, | |
753 | "DEBUG: Device reset failed, error code: %d\n", | |
754 | errcode); | |
755 | else | |
12f89d24 | 756 | fprintf(stderr, |
37e7e6e0 | 757 | "DEBUG: Resetting printer.\n"); |
12f89d24 MS |
758 | } |
759 | ||
557dde9f MS |
760 | /* |
761 | * Close the interface and return... | |
762 | */ | |
763 | ||
12f89d24 | 764 | libusb_close(printer->handle); |
75bd9771 MS |
765 | printer->handle = NULL; |
766 | } | |
767 | ||
768 | return (0); | |
769 | } | |
770 | ||
771 | ||
89a65306 MS |
772 | /* |
773 | * 'compare_quirks()' - Compare two quirks entries. | |
774 | */ | |
775 | ||
776 | static int /* O - Result of comparison */ | |
777 | compare_quirks(usb_quirk_t *a, /* I - First quirk entry */ | |
778 | usb_quirk_t *b) /* I - Second quirk entry */ | |
779 | { | |
780 | int result; /* Result of comparison */ | |
781 | ||
782 | if ((result = b->vendor_id - a->vendor_id) == 0) | |
783 | result = b->product_id - a->product_id; | |
784 | ||
785 | return (result); | |
786 | } | |
787 | ||
788 | ||
75bd9771 MS |
789 | /* |
790 | * 'find_device()' - Find or enumerate USB printers. | |
791 | */ | |
792 | ||
793 | static usb_printer_t * /* O - Found printer */ | |
794 | find_device(usb_cb_t cb, /* I - Callback function */ | |
795 | const void *data) /* I - User data for callback */ | |
796 | { | |
12f89d24 MS |
797 | libusb_device **list; /* List of connected USB devices */ |
798 | libusb_device *device = NULL; /* Current device */ | |
799 | struct libusb_device_descriptor devdesc; | |
800 | /* Current device descriptor */ | |
801 | struct libusb_config_descriptor *confptr = NULL; | |
802 | /* Pointer to current configuration */ | |
803 | const struct libusb_interface *ifaceptr = NULL; | |
804 | /* Pointer to current interface */ | |
805 | const struct libusb_interface_descriptor *altptr = NULL; | |
75bd9771 | 806 | /* Pointer to current alternate setting */ |
12f89d24 | 807 | const struct libusb_endpoint_descriptor *endpptr = NULL; |
75bd9771 | 808 | /* Pointer to current endpoint */ |
2a241c9e MS |
809 | ssize_t err = 0, /* Error code */ |
810 | numdevs, /* number of connected devices */ | |
12f89d24 MS |
811 | i = 0; |
812 | uint8_t conf, /* Current configuration */ | |
75bd9771 MS |
813 | iface, /* Current interface */ |
814 | altset, /* Current alternate setting */ | |
815 | protocol, /* Current protocol */ | |
816 | endp, /* Current endpoint */ | |
817 | read_endp, /* Current read endpoint */ | |
818 | write_endp; /* Current write endpoint */ | |
819 | char device_id[1024],/* IEEE-1284 device ID */ | |
820 | device_uri[1024]; | |
821 | /* Device URI */ | |
822 | static usb_printer_t printer; /* Current printer */ | |
823 | ||
824 | ||
825 | /* | |
826 | * Initialize libusb... | |
827 | */ | |
828 | ||
2a241c9e MS |
829 | err = libusb_init(NULL); |
830 | if (err) | |
831 | { | |
832 | fprintf(stderr, "DEBUG: Unable to initialize USB access via libusb, " | |
f8f52a90 | 833 | "libusb error %i\n", (int)err); |
2a241c9e MS |
834 | return (NULL); |
835 | } | |
836 | ||
12f89d24 MS |
837 | numdevs = libusb_get_device_list(NULL, &list); |
838 | fprintf(stderr, "DEBUG: libusb_get_device_list=%d\n", (int)numdevs); | |
75bd9771 MS |
839 | |
840 | /* | |
841 | * Then loop through the devices it found... | |
842 | */ | |
843 | ||
12f89d24 MS |
844 | if (numdevs > 0) |
845 | for (i = 0; i < numdevs; i++) | |
75bd9771 | 846 | { |
12f89d24 MS |
847 | device = list[i]; |
848 | ||
75bd9771 MS |
849 | /* |
850 | * Ignore devices with no configuration data and anything that is not | |
851 | * a printer... | |
852 | */ | |
853 | ||
37e7e6e0 MS |
854 | if (libusb_get_device_descriptor(device, &devdesc) < 0) |
855 | continue; | |
12f89d24 MS |
856 | |
857 | if (!devdesc.bNumConfigurations || !devdesc.idVendor || | |
858 | !devdesc.idProduct) | |
75bd9771 MS |
859 | continue; |
860 | ||
89a65306 | 861 | printer.quirks = find_quirks(devdesc.idVendor, devdesc.idProduct); |
0cb67df3 MS |
862 | |
863 | /* | |
864 | * Ignore blacklisted printers... | |
865 | */ | |
866 | ||
89a65306 | 867 | if (printer.quirks & USB_QUIRK_BLACKLIST) |
0cb67df3 | 868 | continue; |
37e7e6e0 | 869 | |
12f89d24 MS |
870 | for (conf = 0; conf < devdesc.bNumConfigurations; conf ++) |
871 | { | |
a29fd7dd | 872 | if (libusb_get_config_descriptor(device, conf, &confptr) < 0) |
12f89d24 | 873 | continue; |
75bd9771 MS |
874 | for (iface = 0, ifaceptr = confptr->interface; |
875 | iface < confptr->bNumInterfaces; | |
876 | iface ++, ifaceptr ++) | |
877 | { | |
878 | /* | |
879 | * Some printers offer multiple interfaces... | |
880 | */ | |
881 | ||
882 | protocol = 0; | |
883 | ||
884 | for (altset = 0, altptr = ifaceptr->altsetting; | |
885 | altset < ifaceptr->num_altsetting; | |
886 | altset ++, altptr ++) | |
887 | { | |
888 | /* | |
889 | * Currently we only support unidirectional and bidirectional | |
890 | * printers. Future versions of this code will support the | |
891 | * 1284.4 (packet mode) protocol as well. | |
892 | */ | |
893 | ||
37e7e6e0 | 894 | if (((altptr->bInterfaceClass != LIBUSB_CLASS_PRINTER || |
0fa6c7fa | 895 | altptr->bInterfaceSubClass != 1) && |
89a65306 | 896 | ((printer.quirks & USB_QUIRK_VENDOR_CLASS) == 0)) || |
75bd9771 MS |
897 | (altptr->bInterfaceProtocol != 1 && /* Unidirectional */ |
898 | altptr->bInterfaceProtocol != 2) || /* Bidirectional */ | |
899 | altptr->bInterfaceProtocol < protocol) | |
900 | continue; | |
901 | ||
89a65306 | 902 | if (printer.quirks & USB_QUIRK_VENDOR_CLASS) |
37e7e6e0 MS |
903 | fprintf(stderr, "DEBUG: Printer does not report class 7 and/or " |
904 | "subclass 1 but works as a printer anyway\n"); | |
905 | ||
07623986 MS |
906 | read_endp = 0xff; |
907 | write_endp = 0xff; | |
75bd9771 MS |
908 | |
909 | for (endp = 0, endpptr = altptr->endpoint; | |
910 | endp < altptr->bNumEndpoints; | |
911 | endp ++, endpptr ++) | |
12f89d24 MS |
912 | if ((endpptr->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK) == |
913 | LIBUSB_TRANSFER_TYPE_BULK) | |
75bd9771 | 914 | { |
12f89d24 | 915 | if (endpptr->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK) |
75bd9771 MS |
916 | read_endp = endp; |
917 | else | |
918 | write_endp = endp; | |
919 | } | |
920 | ||
ce7d367d | 921 | if (write_endp != 0xff) |
75bd9771 MS |
922 | { |
923 | /* | |
924 | * Save the best match so far... | |
925 | */ | |
926 | ||
927 | protocol = altptr->bInterfaceProtocol; | |
928 | printer.altset = altset; | |
929 | printer.write_endp = write_endp; | |
37e7e6e0 MS |
930 | if (protocol > 1) |
931 | printer.read_endp = read_endp; | |
932 | else | |
933 | printer.read_endp = -1; | |
75bd9771 MS |
934 | } |
935 | } | |
936 | ||
937 | if (protocol > 0) | |
938 | { | |
12f89d24 MS |
939 | printer.device = device; |
940 | printer.conf = conf; | |
941 | printer.iface = iface; | |
942 | printer.protocol = protocol; | |
943 | printer.handle = NULL; | |
75bd9771 MS |
944 | |
945 | if (!open_device(&printer, data != NULL)) | |
946 | { | |
12f89d24 MS |
947 | get_device_id(&printer, device_id, sizeof(device_id)); |
948 | make_device_uri(&printer, device_id, device_uri, | |
949 | sizeof(device_uri)); | |
75bd9771 | 950 | |
37e7e6e0 MS |
951 | fprintf(stderr, "DEBUG2: Printer found with device ID: %s " |
952 | "Device URI: %s\n", | |
953 | device_id, device_uri); | |
954 | ||
12f89d24 MS |
955 | if ((*cb)(&printer, device_uri, device_id, data)) |
956 | { | |
37e7e6e0 MS |
957 | fprintf(stderr, "DEBUG: Device protocol: %d\n", |
958 | printer.protocol); | |
89a65306 | 959 | if (printer.quirks & USB_QUIRK_UNIDIR) |
37e7e6e0 MS |
960 | { |
961 | printer.read_endp = -1; | |
962 | fprintf(stderr, "DEBUG: Printer reports bi-di support " | |
963 | "but in reality works only uni-directionally\n"); | |
964 | } | |
965 | if (printer.read_endp != -1) | |
966 | { | |
967 | printer.read_endp = confptr->interface[printer.iface]. | |
968 | altsetting[printer.altset]. | |
969 | endpoint[printer.read_endp]. | |
970 | bEndpointAddress; | |
971 | } | |
972 | else | |
0fa6c7fa | 973 | fprintf(stderr, "DEBUG: Uni-directional USB communication " |
37e7e6e0 | 974 | "only!\n"); |
12f89d24 | 975 | printer.write_endp = confptr->interface[printer.iface]. |
005dd1eb MS |
976 | altsetting[printer.altset]. |
977 | endpoint[printer.write_endp]. | |
978 | bEndpointAddress; | |
89a65306 | 979 | if (printer.quirks & USB_QUIRK_NO_REATTACH) |
37e7e6e0 MS |
980 | { |
981 | printer.usblp_attached = 0; | |
982 | fprintf(stderr, "DEBUG: Printer does not like usblp " | |
983 | "kernel module to be re-attached after job\n"); | |
984 | } | |
985 | libusb_free_config_descriptor(confptr); | |
12f89d24 | 986 | return (&printer); |
75bd9771 MS |
987 | } |
988 | ||
989 | close_device(&printer); | |
990 | } | |
991 | } | |
992 | } | |
12f89d24 MS |
993 | libusb_free_config_descriptor(confptr); |
994 | } | |
75bd9771 MS |
995 | } |
996 | ||
997 | /* | |
998 | * If we get this far without returning, then we haven't found a printer | |
999 | * to print to... | |
1000 | */ | |
1001 | ||
12f89d24 MS |
1002 | /* |
1003 | * Clean up .... | |
1004 | */ | |
1005 | ||
2a241c9e MS |
1006 | if (numdevs >= 0) |
1007 | libusb_free_device_list(list, 1); | |
12f89d24 MS |
1008 | libusb_exit(NULL); |
1009 | ||
75bd9771 MS |
1010 | return (NULL); |
1011 | } | |
1012 | ||
1013 | ||
89a65306 MS |
1014 | /* |
1015 | * 'find_quirks()' - Find the quirks for the given printer, if any. | |
1016 | * | |
1017 | * First looks for an exact match, then looks for the vendor ID wildcard match. | |
1018 | */ | |
1019 | ||
1020 | static unsigned /* O - Quirks flags */ | |
1021 | find_quirks(int vendor_id, /* I - Vendor ID */ | |
1022 | int product_id) /* I - Product ID */ | |
1023 | { | |
1024 | usb_quirk_t key, /* Search key */ | |
1025 | *match; /* Matching quirk entry */ | |
1026 | ||
1027 | ||
1028 | key.vendor_id = vendor_id; | |
1029 | key.product_id = product_id; | |
1030 | ||
1031 | if ((match = cupsArrayFind(all_quirks, &key)) != NULL) | |
1032 | return (match->quirks); | |
1033 | ||
1034 | key.product_id = 0; | |
1035 | ||
1036 | if ((match = cupsArrayFind(all_quirks, &key)) != NULL) | |
1037 | return (match->quirks); | |
1038 | ||
1039 | return (USB_QUIRK_WHITELIST); | |
1040 | } | |
1041 | ||
1042 | ||
75bd9771 MS |
1043 | /* |
1044 | * 'get_device_id()' - Get the IEEE-1284 device ID for the printer. | |
1045 | */ | |
1046 | ||
1047 | static int /* O - 0 on success, -1 on error */ | |
1048 | get_device_id(usb_printer_t *printer, /* I - Printer */ | |
1049 | char *buffer, /* I - String buffer */ | |
1050 | size_t bufsize) /* I - Number of bytes in buffer */ | |
1051 | { | |
1052 | int length; /* Length of device ID */ | |
1053 | ||
1054 | ||
12f89d24 MS |
1055 | if (libusb_control_transfer(printer->handle, |
1056 | LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_ENDPOINT_IN | | |
1057 | LIBUSB_RECIPIENT_INTERFACE, | |
1058 | 0, printer->conf, | |
1059 | (printer->iface << 8) | printer->altset, | |
1060 | (unsigned char *)buffer, bufsize, 5000) < 0) | |
75bd9771 MS |
1061 | { |
1062 | *buffer = '\0'; | |
1063 | return (-1); | |
1064 | } | |
1065 | ||
1066 | /* | |
1067 | * Extract the length of the device ID string from the first two | |
1068 | * bytes. The 1284 spec says the length is stored MSB first... | |
1069 | */ | |
1070 | ||
07623986 | 1071 | length = (int)((((unsigned)buffer[0] & 255) << 8) | ((unsigned)buffer[1] & 255)); |
75bd9771 MS |
1072 | |
1073 | /* | |
12f89d24 MS |
1074 | * Check to see if the length is larger than our buffer or less than 14 bytes |
1075 | * (the minimum valid device ID is "MFG:x;MDL:y;" with 2 bytes for the length). | |
1076 | * | |
1077 | * If the length is out-of-range, assume that the vendor incorrectly | |
1078 | * implemented the 1284 spec and re-read the length as LSB first,.. | |
75bd9771 MS |
1079 | */ |
1080 | ||
12f89d24 | 1081 | if (length > bufsize || length < 14) |
07623986 | 1082 | length = (int)((((unsigned)buffer[1] & 255) << 8) | ((unsigned)buffer[0] & 255)); |
75bd9771 | 1083 | |
ee6ddad2 MS |
1084 | if (length > bufsize) |
1085 | length = bufsize; | |
1086 | ||
12f89d24 MS |
1087 | if (length < 14) |
1088 | { | |
1089 | /* | |
1090 | * Invalid device ID, clear it! | |
1091 | */ | |
1092 | ||
1093 | *buffer = '\0'; | |
1094 | return (-1); | |
1095 | } | |
1096 | ||
ee6ddad2 | 1097 | length -= 2; |
75bd9771 MS |
1098 | |
1099 | /* | |
1100 | * Copy the device ID text to the beginning of the buffer and | |
1101 | * nul-terminate. | |
1102 | */ | |
1103 | ||
07623986 | 1104 | memmove(buffer, buffer + 2, (size_t)length); |
75bd9771 MS |
1105 | buffer[length] = '\0'; |
1106 | ||
1107 | return (0); | |
1108 | } | |
1109 | ||
1110 | ||
1111 | /* | |
1112 | * 'list_cb()' - List USB printers for discovery. | |
1113 | */ | |
1114 | ||
1115 | static int /* O - 0 to continue, 1 to stop */ | |
1116 | list_cb(usb_printer_t *printer, /* I - Printer */ | |
1117 | const char *device_uri, /* I - Device URI */ | |
1118 | const char *device_id, /* I - IEEE-1284 device ID */ | |
1119 | const void *data) /* I - User data (not used) */ | |
1120 | { | |
1121 | char make_model[1024]; /* Make and model */ | |
1122 | ||
1123 | ||
1124 | /* | |
1125 | * Get the device URI and make/model strings... | |
1126 | */ | |
1127 | ||
12f89d24 MS |
1128 | if (backendGetMakeModel(device_id, make_model, sizeof(make_model))) |
1129 | strlcpy(make_model, "Unknown", sizeof(make_model)); | |
75bd9771 MS |
1130 | |
1131 | /* | |
1132 | * Report the printer... | |
1133 | */ | |
1134 | ||
749b1e90 MS |
1135 | cupsBackendReport("direct", device_uri, make_model, make_model, device_id, |
1136 | NULL); | |
75bd9771 MS |
1137 | |
1138 | /* | |
1139 | * Keep going... | |
1140 | */ | |
1141 | ||
1142 | return (0); | |
1143 | } | |
1144 | ||
1145 | ||
89a65306 MS |
1146 | /* |
1147 | * 'load_quirks()' - Load all quirks files in the /usr/share/cups/usb directory. | |
1148 | */ | |
1149 | ||
1150 | static void | |
1151 | load_quirks(void) | |
1152 | { | |
1153 | const char *datadir; /* CUPS_DATADIR environment variable */ | |
1154 | char filename[1024], /* Filename */ | |
1155 | line[1024]; /* Line from file */ | |
1156 | cups_dir_t *dir; /* Directory */ | |
1157 | cups_dentry_t *dent; /* Directory entry */ | |
1158 | cups_file_t *fp; /* Quirks file */ | |
1159 | usb_quirk_t *quirk; /* New quirk */ | |
1160 | ||
1161 | ||
1162 | all_quirks = cupsArrayNew((cups_array_func_t)compare_quirks, NULL); | |
1163 | ||
1164 | if ((datadir = getenv("CUPS_DATADIR")) == NULL) | |
1165 | datadir = CUPS_DATADIR; | |
1166 | ||
1167 | snprintf(filename, sizeof(filename), "%s/usb", datadir); | |
1168 | if ((dir = cupsDirOpen(filename)) == NULL) | |
1169 | { | |
1170 | perror(filename); | |
1171 | return; | |
1172 | } | |
1173 | ||
1174 | fprintf(stderr, "DEBUG: Loading USB quirks from \"%s\".\n", filename); | |
1175 | ||
f8f52a90 | 1176 | while ((dent = cupsDirRead(dir)) != NULL) |
89a65306 MS |
1177 | { |
1178 | if (!S_ISREG(dent->fileinfo.st_mode)) | |
1179 | continue; | |
1180 | ||
1181 | snprintf(filename, sizeof(filename), "%s/usb/%s", datadir, dent->filename); | |
1182 | if ((fp = cupsFileOpen(filename, "r")) == NULL) | |
1183 | { | |
1184 | perror(filename); | |
1185 | continue; | |
1186 | } | |
1187 | ||
1188 | while (cupsFileGets(fp, line, sizeof(line))) | |
1189 | { | |
1190 | /* | |
1191 | * Skip blank and comment lines... | |
1192 | */ | |
1193 | ||
1194 | if (line[0] == '#' || !line[0]) | |
1195 | continue; | |
1196 | ||
1197 | /* | |
1198 | * Add a quirk... | |
1199 | */ | |
1200 | ||
1201 | if ((quirk = calloc(1, sizeof(usb_quirk_t))) == NULL) | |
1202 | { | |
1203 | perror("DEBUG: Unable to allocate memory for quirk"); | |
1204 | break; | |
1205 | } | |
1206 | ||
1207 | if (sscanf(line, "%x%x", &quirk->vendor_id, &quirk->product_id) < 1) | |
1208 | { | |
1209 | fprintf(stderr, "DEBUG: Bad line: %s\n", line); | |
1210 | free(quirk); | |
1211 | continue; | |
1212 | } | |
1213 | ||
1214 | if (strstr(line, " blacklist")) | |
1215 | quirk->quirks |= USB_QUIRK_BLACKLIST; | |
1216 | ||
f81d6520 MS |
1217 | if (strstr(line, " delay-close")) |
1218 | quirk->quirks |= USB_QUIRK_DELAY_CLOSE; | |
1219 | ||
89a65306 MS |
1220 | if (strstr(line, " no-reattach")) |
1221 | quirk->quirks |= USB_QUIRK_NO_REATTACH; | |
1222 | ||
1223 | if (strstr(line, " soft-reset")) | |
1224 | quirk->quirks |= USB_QUIRK_SOFT_RESET; | |
1225 | ||
1226 | if (strstr(line, " unidir")) | |
1227 | quirk->quirks |= USB_QUIRK_UNIDIR; | |
1228 | ||
1229 | if (strstr(line, " usb-init")) | |
1230 | quirk->quirks |= USB_QUIRK_USB_INIT; | |
1231 | ||
1232 | if (strstr(line, " vendor-class")) | |
1233 | quirk->quirks |= USB_QUIRK_VENDOR_CLASS; | |
1234 | ||
1235 | cupsArrayAdd(all_quirks, quirk); | |
1236 | } | |
1237 | ||
1238 | cupsFileClose(fp); | |
1239 | } | |
1240 | ||
1241 | fprintf(stderr, "DEBUG: Loaded %d quirks.\n", cupsArrayCount(all_quirks)); | |
1242 | ||
1243 | cupsDirClose(dir); | |
1244 | } | |
1245 | ||
1246 | ||
75bd9771 MS |
1247 | /* |
1248 | * 'make_device_uri()' - Create a device URI for a USB printer. | |
1249 | */ | |
1250 | ||
1251 | static char * /* O - Device URI */ | |
1252 | make_device_uri( | |
1253 | usb_printer_t *printer, /* I - Printer */ | |
1254 | const char *device_id, /* I - IEEE-1284 device ID */ | |
1255 | char *uri, /* I - Device URI buffer */ | |
1256 | size_t uri_size) /* I - Size of device URI buffer */ | |
1257 | { | |
12f89d24 MS |
1258 | struct libusb_device_descriptor devdesc; |
1259 | /* Current device descriptor */ | |
75bd9771 MS |
1260 | char options[1024]; /* Device URI options */ |
1261 | int num_values; /* Number of 1284 parameters */ | |
1262 | cups_option_t *values; /* 1284 parameters */ | |
1263 | const char *mfg, /* Manufacturer */ | |
1264 | *mdl, /* Model */ | |
12f89d24 | 1265 | *des = NULL, /* Description */ |
75bd9771 | 1266 | *sern; /* Serial number */ |
f99f3698 | 1267 | size_t mfglen; /* Length of manufacturer string */ |
75bd9771 MS |
1268 | char tempmfg[256], /* Temporary manufacturer string */ |
1269 | tempsern[256], /* Temporary serial number string */ | |
1270 | *tempptr; /* Pointer into temp string */ | |
1271 | ||
1272 | ||
1273 | /* | |
1274 | * Get the make, model, and serial numbers... | |
1275 | */ | |
1276 | ||
f8b3a85b | 1277 | num_values = _cupsGet1284Values(device_id, &values); |
75bd9771 MS |
1278 | |
1279 | if ((sern = cupsGetOption("SERIALNUMBER", num_values, values)) == NULL) | |
1280 | if ((sern = cupsGetOption("SERN", num_values, values)) == NULL) | |
7cf5915e | 1281 | if ((sern = cupsGetOption("SN", num_values, values)) == NULL && |
a29fd7dd | 1282 | ((libusb_get_device_descriptor(printer->device, &devdesc) >= 0) && |
12f89d24 | 1283 | devdesc.iSerialNumber)) |
75bd9771 MS |
1284 | { |
1285 | /* | |
1286 | * Try getting the serial number from the device itself... | |
1287 | */ | |
1288 | ||
12f89d24 MS |
1289 | int length = |
1290 | libusb_get_string_descriptor_ascii(printer->handle, | |
1291 | devdesc.iSerialNumber, | |
1292 | (unsigned char *)tempsern, | |
1293 | sizeof(tempsern) - 1); | |
75bd9771 MS |
1294 | if (length > 0) |
1295 | { | |
1296 | tempsern[length] = '\0'; | |
1297 | sern = tempsern; | |
1298 | } | |
1299 | } | |
1300 | ||
1301 | if ((mfg = cupsGetOption("MANUFACTURER", num_values, values)) == NULL) | |
1302 | mfg = cupsGetOption("MFG", num_values, values); | |
1303 | ||
1304 | if ((mdl = cupsGetOption("MODEL", num_values, values)) == NULL) | |
1305 | mdl = cupsGetOption("MDL", num_values, values); | |
1306 | ||
75bd9771 MS |
1307 | /* |
1308 | * To maintain compatibility with the original character device backend on | |
1309 | * Linux and *BSD, map manufacturer names... | |
1310 | */ | |
1311 | ||
1312 | if (mfg) | |
1313 | { | |
88f9aafc | 1314 | if (!_cups_strcasecmp(mfg, "Hewlett-Packard")) |
75bd9771 | 1315 | mfg = "HP"; |
88f9aafc | 1316 | else if (!_cups_strcasecmp(mfg, "Lexmark International")) |
75bd9771 MS |
1317 | mfg = "Lexmark"; |
1318 | } | |
1319 | else | |
75bd9771 MS |
1320 | { |
1321 | /* | |
1322 | * No manufacturer? Use the model string or description... | |
1323 | */ | |
1324 | ||
1325 | if (mdl) | |
1326 | _ppdNormalizeMakeAndModel(mdl, tempmfg, sizeof(tempmfg)); | |
1327 | else if ((des = cupsGetOption("DESCRIPTION", num_values, values)) != NULL || | |
1328 | (des = cupsGetOption("DES", num_values, values)) != NULL) | |
1329 | _ppdNormalizeMakeAndModel(des, tempmfg, sizeof(tempmfg)); | |
1330 | else | |
1331 | strlcpy(tempmfg, "Unknown", sizeof(tempmfg)); | |
1332 | ||
1333 | if ((tempptr = strchr(tempmfg, ' ')) != NULL) | |
1334 | *tempptr = '\0'; | |
1335 | ||
1336 | mfg = tempmfg; | |
1337 | } | |
1338 | ||
12f89d24 MS |
1339 | if (!mdl) |
1340 | { | |
1341 | /* | |
1342 | * No model? Use description... | |
1343 | */ | |
1344 | if (des) | |
1345 | mdl = des; /* We remove the manufacturer name below */ | |
1346 | else if (!strncasecmp(mfg, "Unknown", 7)) | |
1347 | mdl = "Printer"; | |
1348 | else | |
1349 | mdl = "Unknown Model"; | |
1350 | } | |
1351 | ||
f99f3698 MS |
1352 | mfglen = strlen(mfg); |
1353 | ||
1354 | if (!strncasecmp(mdl, mfg, mfglen) && _cups_isspace(mdl[mfglen])) | |
1355 | { | |
1356 | mdl += mfglen + 1; | |
1357 | ||
1358 | while (_cups_isspace(*mdl)) | |
1359 | mdl ++; | |
1360 | } | |
1361 | ||
75bd9771 MS |
1362 | /* |
1363 | * Generate the device URI from the manufacturer, model, serial number, | |
1364 | * and interface number... | |
1365 | */ | |
1366 | ||
1367 | if (sern) | |
1368 | { | |
1369 | if (printer->iface > 0) | |
1370 | snprintf(options, sizeof(options), "?serial=%s&interface=%d", sern, | |
1371 | printer->iface); | |
1372 | else | |
1373 | snprintf(options, sizeof(options), "?serial=%s", sern); | |
1374 | } | |
1375 | else if (printer->iface > 0) | |
1376 | snprintf(options, sizeof(options), "?interface=%d", printer->iface); | |
1377 | else | |
1378 | options[0] = '\0'; | |
1379 | ||
1380 | httpAssembleURIf(HTTP_URI_CODING_ALL, uri, uri_size, "usb", NULL, mfg, 0, | |
1381 | "/%s%s", mdl, options); | |
1382 | ||
1383 | cupsFreeOptions(num_values, values); | |
1384 | ||
1385 | return (uri); | |
1386 | } | |
1387 | ||
1388 | ||
1389 | /* | |
1390 | * 'open_device()' - Open a connection to the USB printer. | |
1391 | */ | |
1392 | ||
1393 | static int /* O - 0 on success, -1 on error */ | |
1394 | open_device(usb_printer_t *printer, /* I - Printer */ | |
1395 | int verbose) /* I - Update connecting-to-device state? */ | |
1396 | { | |
12f89d24 MS |
1397 | struct libusb_device_descriptor devdesc; |
1398 | /* Current device descriptor */ | |
1399 | struct libusb_config_descriptor *confptr = NULL; | |
1400 | /* Pointer to current configuration */ | |
1401 | int number1 = -1, /* Configuration/interface/altset */ | |
1402 | number2 = -1, /* numbers */ | |
1403 | errcode = 0; | |
1404 | char current; /* Current configuration */ | |
75bd9771 MS |
1405 | |
1406 | ||
1407 | /* | |
1408 | * Return immediately if we are already connected... | |
1409 | */ | |
1410 | ||
1411 | if (printer->handle) | |
1412 | return (0); | |
1413 | ||
1414 | /* | |
1415 | * Try opening the printer... | |
1416 | */ | |
1417 | ||
37e7e6e0 MS |
1418 | if ((errcode = libusb_open(printer->device, &printer->handle)) < 0) |
1419 | { | |
1420 | fprintf(stderr, "DEBUG: Failed to open device, code: %d\n", | |
1421 | errcode); | |
75bd9771 | 1422 | return (-1); |
37e7e6e0 | 1423 | } |
75bd9771 | 1424 | |
a29fd7dd | 1425 | printer->usblp_attached = 0; |
37e7e6e0 | 1426 | printer->reset_after_job = 0; |
a29fd7dd | 1427 | |
12f89d24 MS |
1428 | if (verbose) |
1429 | fputs("STATE: +connecting-to-device\n", stderr); | |
1430 | ||
37e7e6e0 | 1431 | if ((errcode = libusb_get_device_descriptor(printer->device, &devdesc)) < 0) |
a29fd7dd MS |
1432 | { |
1433 | fprintf(stderr, "DEBUG: Failed to get device descriptor, code: %d\n", | |
1434 | errcode); | |
1435 | goto error; | |
1436 | } | |
1437 | ||
1438 | /* | |
1439 | * Get the "usblp" kernel module out of the way. This backend only | |
1440 | * works without the module attached. | |
1441 | */ | |
1442 | ||
1443 | errcode = libusb_kernel_driver_active(printer->handle, printer->iface); | |
1444 | if (errcode == 0) | |
1445 | printer->usblp_attached = 0; | |
1446 | else if (errcode == 1) | |
1447 | { | |
1448 | printer->usblp_attached = 1; | |
1449 | if ((errcode = | |
1450 | libusb_detach_kernel_driver(printer->handle, printer->iface)) < 0) | |
1451 | { | |
1452 | fprintf(stderr, "DEBUG: Failed to detach \"usblp\" module from %04x:%04x\n", | |
1453 | devdesc.idVendor, devdesc.idProduct); | |
1454 | goto error; | |
1455 | } | |
1456 | } | |
1457 | else | |
1458 | { | |
1459 | printer->usblp_attached = 0; | |
5e1504aa MS |
1460 | |
1461 | if (errcode != LIBUSB_ERROR_NOT_SUPPORTED) | |
1462 | { | |
1463 | fprintf(stderr, | |
1464 | "DEBUG: Failed to check whether %04x:%04x has the \"usblp\" " | |
1465 | "kernel module attached\n", devdesc.idVendor, devdesc.idProduct); | |
1466 | goto error; | |
1467 | } | |
a29fd7dd MS |
1468 | } |
1469 | ||
75bd9771 | 1470 | /* |
12f89d24 MS |
1471 | * Set the desired configuration, but only if it needs changing. Some |
1472 | * printers (e.g., Samsung) don't like libusb_set_configuration. It will | |
1473 | * succeed, but the following print job is sometimes silently lost by the | |
1474 | * printer. | |
75bd9771 MS |
1475 | */ |
1476 | ||
12f89d24 MS |
1477 | if (libusb_control_transfer(printer->handle, |
1478 | LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_ENDPOINT_IN | | |
1479 | LIBUSB_RECIPIENT_DEVICE, | |
1480 | 8, /* GET_CONFIGURATION */ | |
1481 | 0, 0, (unsigned char *)¤t, 1, 5000) < 0) | |
1482 | current = 0; /* Assume not configured */ | |
75bd9771 | 1483 | |
37e7e6e0 MS |
1484 | printer->origconf = current; |
1485 | ||
0fa6c7fa | 1486 | if ((errcode = |
37e7e6e0 MS |
1487 | libusb_get_config_descriptor (printer->device, printer->conf, &confptr)) |
1488 | < 0) | |
1489 | { | |
1490 | fprintf(stderr, "DEBUG: Failed to get config descriptor for %04x:%04x\n", | |
1491 | devdesc.idVendor, devdesc.idProduct); | |
1492 | goto error; | |
1493 | } | |
12f89d24 | 1494 | number1 = confptr->bConfigurationValue; |
e4572d57 | 1495 | |
12f89d24 | 1496 | if (number1 != current) |
75bd9771 | 1497 | { |
0fa6c7fa | 1498 | fprintf(stderr, "DEBUG: Switching USB device configuration: %d -> %d\n", |
37e7e6e0 | 1499 | current, number1); |
12f89d24 MS |
1500 | if ((errcode = libusb_set_configuration(printer->handle, number1)) < 0) |
1501 | { | |
1502 | /* | |
1503 | * If the set fails, chances are that the printer only supports a | |
1504 | * single configuration. Technically these printers don't conform to | |
1505 | * the USB printer specification, but otherwise they'll work... | |
1506 | */ | |
e4572d57 | 1507 | |
12f89d24 MS |
1508 | if (errcode != LIBUSB_ERROR_BUSY) |
1509 | fprintf(stderr, "DEBUG: Failed to set configuration %d for %04x:%04x\n", | |
1510 | number1, devdesc.idVendor, devdesc.idProduct); | |
1511 | } | |
75bd9771 MS |
1512 | } |
1513 | ||
75bd9771 | 1514 | /* |
12f89d24 | 1515 | * Claim interfaces as needed... |
75bd9771 MS |
1516 | */ |
1517 | ||
12f89d24 MS |
1518 | number1 = confptr->interface[printer->iface]. |
1519 | altsetting[printer->altset].bInterfaceNumber; | |
1520 | ||
1521 | while ((errcode = libusb_claim_interface(printer->handle, number1)) < 0) | |
75bd9771 | 1522 | { |
12f89d24 | 1523 | if (errcode != LIBUSB_ERROR_BUSY) |
a29fd7dd | 1524 | { |
75bd9771 | 1525 | fprintf(stderr, |
12f89d24 MS |
1526 | "DEBUG: Failed to claim interface %d for %04x:%04x: %s\n", |
1527 | number1, devdesc.idVendor, devdesc.idProduct, strerror(errno)); | |
75bd9771 | 1528 | |
a29fd7dd MS |
1529 | goto error; |
1530 | } | |
7385c337 MS |
1531 | else if ((errcode = libusb_detach_kernel_driver(printer->handle, printer->iface)) < 0) |
1532 | { | |
1533 | fprintf(stderr, | |
1534 | "DEBUG: Failed to detach \"usblp\" module from %04x:%04x\n", | |
1535 | devdesc.idVendor, devdesc.idProduct); | |
1536 | ||
1537 | goto error; | |
1538 | } | |
1539 | ||
1540 | sleep (1); | |
75bd9771 MS |
1541 | } |
1542 | ||
12f89d24 MS |
1543 | /* |
1544 | * Set alternate setting, but only if there is more than one option. Some | |
1545 | * printers (e.g., Samsung) don't like usb_set_altinterface. | |
1546 | */ | |
1547 | ||
1548 | if (confptr->interface[printer->iface].num_altsetting > 1) | |
1549 | { | |
1550 | number1 = confptr->interface[printer->iface]. | |
1551 | altsetting[printer->altset].bInterfaceNumber; | |
1552 | number2 = confptr->interface[printer->iface]. | |
1553 | altsetting[printer->altset].bAlternateSetting; | |
1554 | ||
1555 | while ((errcode = | |
1556 | libusb_set_interface_alt_setting(printer->handle, number1, number2)) | |
1557 | < 0) | |
1558 | { | |
1559 | if (errcode != LIBUSB_ERROR_BUSY) | |
a29fd7dd | 1560 | { |
12f89d24 MS |
1561 | fprintf(stderr, |
1562 | "DEBUG: Failed to set alternate interface %d for %04x:%04x: " | |
1563 | "%s\n", | |
1564 | number2, devdesc.idVendor, devdesc.idProduct, strerror(errno)); | |
1565 | ||
a29fd7dd MS |
1566 | goto error; |
1567 | } | |
12f89d24 MS |
1568 | } |
1569 | } | |
1570 | ||
1571 | libusb_free_config_descriptor(confptr); | |
1572 | ||
75bd9771 MS |
1573 | if (verbose) |
1574 | fputs("STATE: -connecting-to-device\n", stderr); | |
1575 | ||
1576 | return (0); | |
1577 | ||
1578 | /* | |
1579 | * If we get here, there was a hard error... | |
1580 | */ | |
1581 | ||
1582 | error: | |
1583 | ||
1584 | if (verbose) | |
1585 | fputs("STATE: -connecting-to-device\n", stderr); | |
1586 | ||
12f89d24 | 1587 | libusb_close(printer->handle); |
75bd9771 MS |
1588 | printer->handle = NULL; |
1589 | ||
1590 | return (-1); | |
1591 | } | |
1592 | ||
1593 | ||
1594 | /* | |
1595 | * 'print_cb()' - Find a USB printer for printing. | |
1596 | */ | |
1597 | ||
1598 | static int /* O - 0 to continue, 1 to stop (found) */ | |
1599 | print_cb(usb_printer_t *printer, /* I - Printer */ | |
1600 | const char *device_uri, /* I - Device URI */ | |
1601 | const char *device_id, /* I - IEEE-1284 device ID */ | |
1602 | const void *data) /* I - User data (make, model, S/N) */ | |
1603 | { | |
f99f3698 MS |
1604 | char requested_uri[1024], /* Requested URI */ |
1605 | *requested_ptr, /* Pointer into requested URI */ | |
1606 | detected_uri[1024], /* Detected URI */ | |
1607 | *detected_ptr; /* Pointer into detected URI */ | |
1608 | ||
1609 | ||
1610 | /* | |
1611 | * If we have an exact match, stop now... | |
1612 | */ | |
1613 | ||
1614 | if (!strcmp((char *)data, device_uri)) | |
1615 | return (1); | |
1616 | ||
1617 | /* | |
1618 | * Work on copies of the URIs... | |
1619 | */ | |
1620 | ||
1621 | strlcpy(requested_uri, (char *)data, sizeof(requested_uri)); | |
1622 | strlcpy(detected_uri, device_uri, sizeof(detected_uri)); | |
1623 | ||
1624 | /* | |
1625 | * libusb-discovered URIs can have an "interface" specification and this | |
1626 | * never happens for usblp-discovered URIs, so remove the "interface" | |
1627 | * specification from the URI which we are checking currently. This way a | |
1628 | * queue for a usblp-discovered printer can now be accessed via libusb. | |
1629 | * | |
1630 | * Similarly, strip "?serial=NNN...NNN" as needed. | |
1631 | */ | |
1632 | ||
1633 | if ((requested_ptr = strstr(requested_uri, "?interface=")) == NULL) | |
1634 | requested_ptr = strstr(requested_uri, "&interface="); | |
1635 | if ((detected_ptr = strstr(detected_uri, "?interface=")) == NULL) | |
1636 | detected_ptr = strstr(detected_uri, "&interface="); | |
1637 | ||
1638 | if (!requested_ptr && detected_ptr) | |
1639 | { | |
1640 | /* | |
1641 | * Strip "[?&]interface=nnn" from the detected printer. | |
1642 | */ | |
1643 | ||
1644 | *detected_ptr = '\0'; | |
1645 | } | |
1646 | else if (requested_ptr && !detected_ptr) | |
1647 | { | |
1648 | /* | |
1649 | * Strip "[?&]interface=nnn" from the requested printer. | |
1650 | */ | |
1651 | ||
1652 | *requested_ptr = '\0'; | |
1653 | } | |
1654 | ||
1655 | if ((requested_ptr = strstr(requested_uri, "?serial=?")) != NULL) | |
1656 | { | |
1657 | /* | |
1658 | * Strip "?serial=?" from the requested printer. This is a special | |
1659 | * case, as "?serial=?" means no serial number and not the serial | |
1660 | * number '?'. This is not covered by the checks below... | |
1661 | */ | |
1662 | ||
1663 | *requested_ptr = '\0'; | |
1664 | } | |
1665 | ||
1666 | if ((requested_ptr = strstr(requested_uri, "?serial=")) == NULL && | |
1667 | (detected_ptr = strstr(detected_uri, "?serial=")) != NULL) | |
1668 | { | |
1669 | /* | |
1670 | * Strip "?serial=nnn" from the detected printer. | |
1671 | */ | |
1672 | ||
1673 | *detected_ptr = '\0'; | |
1674 | } | |
1675 | else if (requested_ptr && !detected_ptr) | |
1676 | { | |
1677 | /* | |
1678 | * Strip "?serial=nnn" from the requested printer. | |
1679 | */ | |
1680 | ||
1681 | *requested_ptr = '\0'; | |
1682 | } | |
1683 | ||
1684 | return (!strcmp(requested_uri, detected_uri)); | |
75bd9771 MS |
1685 | } |
1686 | ||
1687 | ||
005dd1eb | 1688 | /* |
12f89d24 | 1689 | * 'read_thread()' - Thread to read the backchannel data on. |
005dd1eb MS |
1690 | */ |
1691 | ||
12f89d24 MS |
1692 | static void *read_thread(void *reference) |
1693 | { | |
1694 | unsigned char readbuffer[512]; | |
1695 | int rbytes; | |
1696 | int readstatus; | |
1697 | struct timeval now, | |
1698 | delay, | |
1699 | end, | |
1700 | timeleft; | |
1701 | ||
1702 | ||
1703 | (void)reference; | |
1704 | ||
1705 | /* | |
1706 | * Read frequency: once every 250 milliseconds. | |
1707 | */ | |
1708 | ||
1709 | delay.tv_sec = 0; | |
1710 | delay.tv_usec = 250000; | |
1711 | ||
1712 | do | |
1713 | { | |
1714 | /* | |
1715 | * Remember when we started so we can throttle the loop after the read | |
1716 | * call... | |
1717 | */ | |
1718 | ||
1719 | gettimeofday(&now, NULL); | |
1720 | ||
1721 | /* | |
1722 | * Calculate what 250 milliSeconds are in absolute time... | |
1723 | */ | |
1724 | ||
1725 | timeradd(&now, &delay, &end); | |
1726 | ||
1727 | rbytes = sizeof(readbuffer); | |
1728 | readstatus = libusb_bulk_transfer(g.printer->handle, | |
1729 | g.printer->read_endp, | |
1730 | readbuffer, rbytes, | |
1731 | &rbytes, 60000); | |
1732 | if (readstatus == LIBUSB_SUCCESS && rbytes > 0) | |
1733 | { | |
1734 | fprintf(stderr, "DEBUG: Read %d bytes of back-channel data...\n", | |
1735 | (int)rbytes); | |
07623986 | 1736 | cupsBackChannelWrite((const char *)readbuffer, (size_t)rbytes, 1.0); |
12f89d24 MS |
1737 | } |
1738 | else if (readstatus == LIBUSB_ERROR_TIMEOUT) | |
1739 | fputs("DEBUG: Got USB transaction timeout during read.\n", stderr); | |
1740 | else if (readstatus == LIBUSB_ERROR_PIPE) | |
1741 | fputs("DEBUG: Got USB pipe stalled during read.\n", stderr); | |
1742 | else if (readstatus == LIBUSB_ERROR_INTERRUPTED) | |
1743 | fputs("DEBUG: Got USB return aborted during read.\n", stderr); | |
1744 | ||
1745 | /* | |
1746 | * Make sure this loop executes no more than once every 250 miliseconds... | |
1747 | */ | |
1748 | ||
1749 | if ((readstatus != LIBUSB_SUCCESS || rbytes == 0) && | |
1750 | (g.wait_eof || !g.read_thread_stop)) | |
1751 | { | |
1752 | gettimeofday(&now, NULL); | |
1753 | if (timercmp(&now, &end, <)) | |
1754 | { | |
1755 | timersub(&end, &now, &timeleft); | |
1756 | usleep(1000000 * timeleft.tv_sec + timeleft.tv_usec); | |
1757 | } | |
1758 | } | |
1759 | } while (g.wait_eof || !g.read_thread_stop); | |
1760 | ||
1761 | /* | |
1762 | * Let the main thread know that we have completed the read thread... | |
1763 | */ | |
1764 | ||
1765 | pthread_mutex_lock(&g.read_thread_mutex); | |
1766 | g.read_thread_done = 1; | |
1767 | pthread_cond_signal(&g.read_thread_cond); | |
1768 | pthread_mutex_unlock(&g.read_thread_mutex); | |
1769 | ||
1770 | return (NULL); | |
1771 | } | |
1772 | ||
1773 | ||
1774 | /* | |
1775 | * 'sidechannel_thread()' - Handle side-channel requests. | |
1776 | */ | |
1777 | ||
1778 | static void* | |
1779 | sidechannel_thread(void *reference) | |
005dd1eb | 1780 | { |
005dd1eb MS |
1781 | cups_sc_command_t command; /* Request command */ |
1782 | cups_sc_status_t status; /* Request/response status */ | |
1783 | char data[2048]; /* Request/response data */ | |
1784 | int datalen; /* Request/response data size */ | |
1785 | ||
1786 | ||
12f89d24 | 1787 | (void)reference; |
005dd1eb | 1788 | |
12f89d24 | 1789 | do |
005dd1eb | 1790 | { |
12f89d24 | 1791 | datalen = sizeof(data); |
005dd1eb | 1792 | |
12f89d24 MS |
1793 | if (cupsSideChannelRead(&command, &status, data, &datalen, 1.0)) |
1794 | { | |
1795 | if (status == CUPS_SC_STATUS_TIMEOUT) | |
1796 | continue; | |
1797 | else | |
1798 | break; | |
1799 | } | |
1800 | ||
1801 | switch (command) | |
1802 | { | |
1803 | case CUPS_SC_CMD_SOFT_RESET: /* Do a soft reset */ | |
1804 | fputs("DEBUG: CUPS_SC_CMD_SOFT_RESET received from driver...\n", | |
1805 | stderr); | |
1806 | ||
1807 | soft_reset(); | |
1808 | cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, NULL, 0, 1.0); | |
1809 | fputs("DEBUG: Returning status CUPS_STATUS_OK with no bytes...\n", | |
1810 | stderr); | |
1811 | break; | |
1812 | ||
1813 | case CUPS_SC_CMD_DRAIN_OUTPUT: /* Drain all pending output */ | |
1814 | fputs("DEBUG: CUPS_SC_CMD_DRAIN_OUTPUT received from driver...\n", | |
1815 | stderr); | |
1816 | ||
1817 | g.drain_output = 1; | |
1818 | break; | |
1819 | ||
1820 | case CUPS_SC_CMD_GET_BIDI: /* Is the connection bidirectional? */ | |
1821 | fputs("DEBUG: CUPS_SC_CMD_GET_BIDI received from driver...\n", | |
1822 | stderr); | |
1823 | ||
1824 | data[0] = (g.printer->protocol >= 2 ? 1 : 0); | |
1825 | cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, 1, 1.0); | |
1826 | ||
1827 | fprintf(stderr, | |
1828 | "DEBUG: Returned CUPS_SC_STATUS_OK with 1 byte (%02X)...\n", | |
1829 | data[0]); | |
1830 | break; | |
1831 | ||
1832 | case CUPS_SC_CMD_GET_DEVICE_ID: /* Return IEEE-1284 device ID */ | |
1833 | fputs("DEBUG: CUPS_SC_CMD_GET_DEVICE_ID received from driver...\n", | |
1834 | stderr); | |
005dd1eb | 1835 | |
12f89d24 MS |
1836 | datalen = sizeof(data); |
1837 | if (get_device_id(g.printer, data, sizeof(data))) | |
1838 | { | |
1839 | status = CUPS_SC_STATUS_IO_ERROR; | |
1840 | datalen = 0; | |
005dd1eb | 1841 | } |
12f89d24 MS |
1842 | else |
1843 | { | |
1844 | status = CUPS_SC_STATUS_OK; | |
1845 | datalen = strlen(data); | |
1846 | } | |
1847 | cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, datalen, 1.0); | |
005dd1eb | 1848 | |
12f89d24 MS |
1849 | if (datalen < sizeof(data)) |
1850 | data[datalen] = '\0'; | |
1851 | else | |
1852 | data[sizeof(data) - 1] = '\0'; | |
005dd1eb | 1853 | |
12f89d24 MS |
1854 | fprintf(stderr, |
1855 | "DEBUG: Returning CUPS_SC_STATUS_OK with %d bytes (%s)...\n", | |
1856 | datalen, data); | |
1857 | break; | |
005dd1eb | 1858 | |
12f89d24 MS |
1859 | case CUPS_SC_CMD_GET_STATE: /* Return device state */ |
1860 | fputs("DEBUG: CUPS_SC_CMD_GET_STATE received from driver...\n", | |
1861 | stderr); | |
005dd1eb | 1862 | |
12f89d24 MS |
1863 | data[0] = CUPS_SC_STATE_ONLINE; |
1864 | cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, 1, 1.0); | |
005dd1eb | 1865 | |
12f89d24 MS |
1866 | fprintf(stderr, |
1867 | "DEBUG: Returned CUPS_SC_STATUS_OK with 1 byte (%02X)...\n", | |
1868 | data[0]); | |
1869 | break; | |
1870 | ||
1871 | case CUPS_SC_CMD_GET_CONNECTED: /* Return whether device is | |
1872 | connected */ | |
1873 | fputs("DEBUG: CUPS_SC_CMD_GET_CONNECTED received from driver...\n", | |
1874 | stderr); | |
1875 | ||
1876 | data[0] = (g.printer->handle ? 1 : 0); | |
1877 | cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, 1, 1.0); | |
1878 | ||
1879 | fprintf(stderr, | |
1880 | "DEBUG: Returned CUPS_SC_STATUS_OK with 1 byte (%02X)...\n", | |
1881 | data[0]); | |
1882 | break; | |
1883 | ||
1884 | default: | |
1885 | fprintf(stderr, "DEBUG: Unknown side-channel command (%d) received " | |
1886 | "from driver...\n", command); | |
1887 | ||
1888 | cupsSideChannelWrite(command, CUPS_SC_STATUS_NOT_IMPLEMENTED, | |
1889 | NULL, 0, 1.0); | |
1890 | ||
1891 | fputs("DEBUG: Returned CUPS_SC_STATUS_NOT_IMPLEMENTED with no bytes...\n", | |
1892 | stderr); | |
1893 | break; | |
1894 | } | |
1895 | } | |
1896 | while (!g.sidechannel_thread_stop); | |
1897 | ||
1898 | pthread_mutex_lock(&g.sidechannel_thread_mutex); | |
1899 | g.sidechannel_thread_done = 1; | |
1900 | pthread_cond_signal(&g.sidechannel_thread_cond); | |
1901 | pthread_mutex_unlock(&g.sidechannel_thread_mutex); | |
1902 | ||
1903 | return (NULL); | |
1904 | } | |
1905 | ||
1906 | ||
1907 | /* | |
1908 | * 'soft_reset()' - Send a soft reset to the device. | |
1909 | */ | |
1910 | ||
89a65306 MS |
1911 | static void |
1912 | soft_reset(void) | |
12f89d24 MS |
1913 | { |
1914 | fd_set input_set; /* Input set for select() */ | |
1915 | struct timeval tv; /* Time value */ | |
1916 | char buffer[2048]; /* Buffer */ | |
1917 | struct timespec cond_timeout; /* pthread condition timeout */ | |
1918 | ||
89a65306 | 1919 | |
12f89d24 MS |
1920 | /* |
1921 | * Send an abort once a second until the I/O lock is released by the main | |
1922 | * thread... | |
1923 | */ | |
1924 | ||
1925 | pthread_mutex_lock(&g.readwrite_lock_mutex); | |
1926 | while (g.readwrite_lock) | |
1927 | { | |
1928 | gettimeofday(&tv, NULL); | |
1929 | cond_timeout.tv_sec = tv.tv_sec + 1; | |
1930 | cond_timeout.tv_nsec = tv.tv_usec * 1000; | |
1931 | ||
1932 | while (g.readwrite_lock) | |
1933 | { | |
1934 | if (pthread_cond_timedwait(&g.readwrite_lock_cond, | |
1935 | &g.readwrite_lock_mutex, | |
1936 | &cond_timeout) != 0) | |
005dd1eb | 1937 | break; |
12f89d24 | 1938 | } |
005dd1eb MS |
1939 | } |
1940 | ||
12f89d24 MS |
1941 | g.readwrite_lock = 1; |
1942 | pthread_mutex_unlock(&g.readwrite_lock_mutex); | |
1943 | ||
1944 | /* | |
1945 | * Flush bytes waiting on print_fd... | |
1946 | */ | |
1947 | ||
1948 | g.print_bytes = 0; | |
1949 | ||
1950 | FD_ZERO(&input_set); | |
1951 | FD_SET(g.print_fd, &input_set); | |
1952 | ||
1953 | tv.tv_sec = 0; | |
1954 | tv.tv_usec = 0; | |
1955 | ||
1956 | while (select(g.print_fd+1, &input_set, NULL, NULL, &tv) > 0) | |
1957 | if (read(g.print_fd, buffer, sizeof(buffer)) <= 0) | |
1958 | break; | |
1959 | ||
1960 | /* | |
1961 | * Send the reset... | |
1962 | */ | |
1963 | ||
89a65306 | 1964 | soft_reset_printer(g.printer); |
12f89d24 MS |
1965 | |
1966 | /* | |
1967 | * Release the I/O lock... | |
1968 | */ | |
005dd1eb | 1969 | |
12f89d24 MS |
1970 | pthread_mutex_lock(&g.readwrite_lock_mutex); |
1971 | g.readwrite_lock = 0; | |
1972 | pthread_cond_signal(&g.readwrite_lock_cond); | |
1973 | pthread_mutex_unlock(&g.readwrite_lock_mutex); | |
005dd1eb MS |
1974 | } |
1975 | ||
1976 | ||
89a65306 MS |
1977 | /* |
1978 | * 'soft_reset_printer()' - Do the soft reset request specific to printers | |
1979 | * | |
1980 | * This soft reset is specific to the printer device class and is much less | |
1981 | * invasive than the general USB reset libusb_reset_device(). Especially it | |
1982 | * does never happen that the USB addressing and configuration changes. What | |
1983 | * is actually done is that all buffers get flushed and the bulk IN and OUT | |
1984 | * pipes get reset to their default states. This clears all stall conditions. | |
1985 | * See http://cholla.mmto.org/computers/linux/usb/usbprint11.pdf | |
1986 | */ | |
1987 | ||
1988 | static int /* O - 0 on success, < 0 on error */ | |
1989 | soft_reset_printer( | |
1990 | usb_printer_t *printer) /* I - Printer */ | |
1991 | { | |
1992 | struct libusb_config_descriptor *confptr = NULL; | |
1993 | /* Pointer to current configuration */ | |
1994 | int interface, /* Interface to reset */ | |
1995 | errcode; /* Error code */ | |
1996 | ||
1997 | ||
1998 | if (libusb_get_config_descriptor(printer->device, printer->conf, | |
1999 | &confptr) < 0) | |
2000 | interface = printer->iface; | |
2001 | else | |
2002 | interface = confptr->interface[printer->iface]. | |
2003 | altsetting[printer->altset].bInterfaceNumber; | |
2004 | ||
2005 | libusb_free_config_descriptor(confptr); | |
2006 | ||
2007 | if ((errcode = libusb_control_transfer(printer->handle, | |
2008 | LIBUSB_REQUEST_TYPE_CLASS | | |
2009 | LIBUSB_ENDPOINT_OUT | | |
2010 | LIBUSB_RECIPIENT_OTHER, | |
2011 | 2, 0, interface, NULL, 0, 5000)) < 0) | |
2012 | errcode = libusb_control_transfer(printer->handle, | |
2013 | LIBUSB_REQUEST_TYPE_CLASS | | |
2014 | LIBUSB_ENDPOINT_OUT | | |
2015 | LIBUSB_RECIPIENT_INTERFACE, | |
2016 | 2, 0, interface, NULL, 0, 5000); | |
2017 | ||
2018 | return (errcode); | |
2019 | } |