-CHANGES.txt - 2.1.0 - 2015-08-13
+CHANGES.txt - 2.2.2 - 2017-01-16
--------------------------------
-CHANGES IN CUPS V2.1.0
-
- - Fixed more scheduler crash bugs in the new logging code (STR #4687,
- STR #4690)
- - Now support new Chinese locale IDs and their correct fallback locales
- (<rdar://problem/22086642>, <rdar://problem/22130168>)
- - "make check" incorrectly reported an expectation of 18 warning
- messages when 8 were expected (STR #4684)
-
-
-CHANGES IN CUPS V2.1rc1
-
- - Added support for 3D printers (basic types only, no built-in filters)
- based on PWG white paper.
- - Fixed bugs in the new journald support (STR #4655, STR #4658,
- STR #4661)
- - Fixed domain socket support on Linux (STR #4679)
- - Fixed signal handlers in the dnssd and usb backends (STR #4671)
- - <Limit All> in <Policy> sections now applies to all operations when
- used by itself (STR #4659)
- - Configure script changes for systemd support (STR #4669)
- - Updated autoconf sources to use newer form of AC_INIT (STR #4664)
-
-
-CHANGES IN CUPS V2.1b1
-
- - Improved speed of ppdMarkDefaults for complex/large PPDs
- (<rdar://problem/15146999>)
- - The IPP backend now stops sending print data if the printer indicates
- the job has been aborted or canceled (<rdar://problem/17837631>)
- - The IPP backend now sends the job-pages-per-set attribute when
- printing multiple copy jobs with finishings
- (<rdar://problem/16792757>)
- - The IPP backend now updates the cupsMandatory values when the printer
- configuration changes (<rdar://problem/18126570>)
- - No longer install banner files since third-party banner filters now
- supply their own (STR #4518)
- - Added support for EXPECT-ALL directive in ipptool test files
- (STR #4469)
- - Added support for WITH-VALUE-FROM predicate in ipptool test files
- (STR #4470)
- - The scheduler no longer listens on the loopback interface unless the
- web interface or printer sharing are enabled
- (<rdar://problem/9136448>)
- - Added a PPD generator for IPP Everywhere printers (STR #4258)
- - Now install "default" versions of more configuration files
- (<rdar://problem/19024491>)
- - The cupstestppd program did not handle "maxsize(nnn)" entries in
- cupsFilter/cupsFilter2 values (<rdar://problem/18974858>)
- - The scheduler now checks the return value of rename() calls
- (STR #4589)
- - The scheduler now validates ErrorPolicy values in config files
- (STR #4591)
- - Long cookies caused the web interface to stop working (STR #4619)
- - Added SSLOptions values to allow Diffie-Hellman key exchange and
- disable TLS/1.0 support.
- - Updated the scheduler to support more IPP Everywhere attributes
- (STR #4630)
- - The scheduler now supports advanced ASL and journald logging when
- "syslog" output is configured (STR #4474)
- - The scheduler now supports logging to stderr when running in the
- foreground (STR #4505)
+CHANGES IN CUPS V2.2.2
+ - Fixed some issues with the Zebra ZPL printer driver (Issue #4898)
+ - Fixed some issues with IPP Everywhere printer support (Issue #4893,
+ Issue #4909, Issue #4916, Issue #4921, Issue #4923, Issue #4932,
+ Issue #4933, Issue #4938)
+ - The scheduler did not detect when an encrypted connection was closed
+ by the client on Linux (Issue #4901)
+ - The cups-lpd program did not catch all legacy usage of ISO-8859-1
+ (Issue #4899)
+ - Fixed builds on systems without a working poll() implementation
+ (Issue #4905)
+ - Added a USB quirk rule for the Kyocera Ecosys P6026cdn (Issue #4900)
+ - The scheduler no longer creates log files on startup
+ (<rdar://problem/28332470>)
+ - The ippContainsString function now uses case-insensitive comparisons
+ for mimeMediaType, name, and text values in conformance with RFC 2911.
+ - The network backends now log the addresses that were found for a
+ printer (<rdar://problem/29268474>)
+ - Let's Encrypt certificates did not work when the hostname contained
+ uppercase letters (Issue #4919)
+ - Updated systemd config files (Issue #4935)
+ - Updated documentation (PR #4896)
+ - Updated localizations (PR #4894, PR #4895, PR #4904, PR #4908,
+ Issue #4946)
+ - Updated packaging files (Issue #4940)
+
+
+CHANGES IN CUPS V2.2.1
+
+ - Added "CreateSelfSignedCerts" directive for cups-files.conf to
+ control whether the scheduler automatically creates its own
+ self-signed X.509 certificates for TLS connections (Issue #4876)
+ - http*Connect did not handle partial failures (Issue #4870)
+ - Addressed some build warnings on Linux (Issue #4881)
+ - cupsHashData did not use the correct hashing algorithm
+ (<rdar://problem/28209220>)
+ - Updated man pages (PR #4885)
+ - Updated localizations (PR #4877, PR #4886)
+
+
+CHANGES IN CUPS V2.2.0
+
+ - Normalized the TLS certificate validation code and added additional
+ error messages to aid troubleshooting.
+ - http*Connect did not work on Linux when cupsd was not running
+ (Issue #4870)
+ - The --no-remote-any option of cupsctl had no effect (Issue #4866)
+ - http*Connect did not return early when all addresses failed
+ (Issue #4870)
+
+
+CHANGES IN CUPS V2.2rc1
+
+ - Updated the list of supported IPP Everywhere media types.
+ - The IPP backend did not validate TLS credentials properly.
+ - The printer-state-message attribute was not cleared after a
+ print job with no errors (Issue #4851)
+ - The CUPS-Add-Modify-Class and CUPS-Add-Modify-Printer operations did
+ not always return an error for failed adds (Issue #4854)
+ - PPD files with names longer than 127 bytes did not work (Issue #4860)
+ - Updated localizations (Issue #4846, PR #4858)
+
+
+CHANGES IN CUPS V2.2b2
+
+ - Added Upstart support (PR #4825)
+ - CUPS now supports Let's Encrypt certificates on Linux.
+
+
+CHANGES IN CUPS V2.2b1
+
+ - All CUPS commands now support POSIX options (Issue #4813)
+ - The scheduler now restarts faster (Issue #4760)
+ - Improved performance of web interface with large numbers of jobs
+ (Issue #3819)
+ - Encrypted printing can now be limited to only trusted printers and
+ servers (<rdar://problem/25711658>)
+ - The scheduler now advertises PWG Raster attributes for IPP Everywhere
+ clients (Issue #4428)
+ - The scheduler now logs informational messages for jobs at LogLevel
+ "info" (Issue #4815)
+ - The scheduler now uses the getgrouplist function when available
+ (Issue #4611)
+ - The IPP backend no longer enables compression by default except for
+ certain raster formats that generally benefit from it
+ (<rdar://problem/25166952>)
+ - The scheduler did not handle out-of-disk situations gracefully
+ (Issue #4742)
+ - The LPD mini-daemon now detects invalid UTF-8 sequences in job,
+ document, and user names (Issue #4748)
+ - The IPP backend now continues on to the next job when the remote
+ server/printer puts the job on hold (<rdar://problem/24858548>)
+ - The scheduler did not cancel multi-document jobs immediately
+ (<rdar://problem/24854834>)
+ - The scheduler did not return non-shared printers to local clients
+ unless they connected to the domain socket (<rdar://problem/24566996>)
+ - The scheduler now reads the spool directory if one or more job cache
+ entries point to deleted jobs (<rdar://problem/24048846>)
+ - Added support for disc media sizes (<rdar://problem/20219536>)
+ - The httpAddrConnect and httpConnect* APIs now try connecting to
+ multiple addresses in parallel (<rdar://problem/20643153>)
+ - The cupsd domain socket is no longer world-accessible on macOS
+ (<rdar://problem/7542560>)
+ - Interface scripts are no longer supported for security reasons
+ (<rdar://problem/23135640>)
+ - Added a new cupsHashData API and support for hashed job passwords
+ (<rdar://problem/20221502>)
+ - Localization fixes (<rdar://problem/25292403>,
+ <rdar://problem/25461517>, Issue #4041, Issue #4796)
+ - Documentation changes (Issue #4624, Issue #4781)
+ - Packaging fixes (PR #4832)