"\tForm mounted:" = "\tForm mounted:";
"\tForms allowed:" = "\tForms allowed:";
"\tInterface: %s.ppd" = "\tInterface: %s.ppd";
-"\tInterface: %s/interfaces/%s" = "\tInterface: %s/interfaces/%s";
"\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd";
"\tLocation: %s" = "\tLocation: %s";
"\tOn fault: no alert" = "\tOn fault: no alert";
"\tUsers denied:" = "\tUsers denied:";
"\tdaemon present" = "\tdaemon present";
"\tno entries" = "\tno entries";
-"\tprinter is on device '%s' speed -1" = "\tprinter is on device '%s' speed -1";
+"\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1";
"\tprinting is disabled" = "\tprinting is disabled";
"\tprinting is enabled" = "\tprinting is enabled";
"\tqueued for %s" = "\tqueued for %s";
"\tqueuing is enabled" = "\tqueuing is enabled";
"\treason unknown" = "\treason unknown";
"\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS";
-" Ignore specific warnings." = " Ignore specific warnings.";
-" Issue warnings instead of errors." = " Issue warnings instead of errors.";
" REF: Page 15, section 3.1." = " REF: Page 15, section 3.1.";
" REF: Page 15, section 3.2." = " REF: Page 15, section 3.2.";
" REF: Page 19, section 3.3." = " REF: Page 19, section 3.3.";
" WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7.";
" WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7.";
" WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3.";
-" cupsaddsmb [options] -a" = " cupsaddsmb [options] -a";
-" cupstestdsc [options] -" = " cupstestdsc [options] -";
-" program | cupstestppd [options] -" = " program | cupstestppd [options] -";
-" %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\").";
+" %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s “%s %s” conflicts with “%s %s”\n (constraint=“%s %s %s %s”).";
" %s %s %s does not exist." = " %s %s %s does not exist.";
-" %s %s file \"%s\" has the wrong capitalization." = " %s %s file \"%s\" has the wrong capitalization.";
+" %s %s file \"%s\" has the wrong capitalization." = " %s %s file “%s” has the wrong capitalization.";
" %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17";
-" %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 \"%s\" translation string for option %s, choice %s.";
-" %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 \"%s\" translation string for option %s.";
-" %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value \"%s\".";
-" %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value \"%s\".";
+" %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 “%s” translation string for option %s, choice %s.";
+" %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 “%s” translation string for option %s.";
+" %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value “%s”.";
+" %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value “%s”.";
" %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s.";
-" %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value \"%s\".";
-" %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: \"%s\"";
-" %s Bad language \"%s\"." = " %s Bad language \"%s\".";
-" %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file \"%s\".";
+" %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value “%s”.";
+" %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: “%s”";
+" %s Bad language \"%s\"." = " %s Bad language “%s”.";
+" %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file “%s”.";
" %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s.";
" %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID.";
" %s Default choices conflicting." = " %s Default choices conflicting.";
" %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s";
-" %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing \"%s\" translation string for option %s, choice %s.";
-" %s Missing \"%s\" translation string for option %s." = " %s Missing \"%s\" translation string for option %s.";
-" %s Missing %s file \"%s\"." = " %s Missing %s file \"%s\".";
+" %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing “%s” translation string for option %s, choice %s.";
+" %s Missing \"%s\" translation string for option %s." = " %s Missing “%s” translation string for option %s.";
+" %s Missing %s file \"%s\"." = " %s Missing %s file “%s”.";
" %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14.";
" %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14.";
-" %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\".";
-" %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"";
+" %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints “*%s %s *%s %s”.";
+" %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: “%s”";
" %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s";
-" %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints \"*%s %s *%s %s\".";
-" %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: \"%s\"";
-" %s No base translation \"%s\" is included in file." = " %s No base translation \"%s\" is included in file.";
+" %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints “*%s %s *%s %s”.";
+" %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: “%s”";
+" %s No base translation \"%s\" is included in file." = " %s No base translation “%s” is included in file.";
" %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17";
-" %s Size \"%s\" defined for %s but not for %s." = " %s Size \"%s\" defined for %s but not for %s.";
-" %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size \"%s\" has unexpected dimensions (%gx%g).";
-" %s Size \"%s\" should be \"%s\"." = " %s Size \"%s\" should be \"%s\".";
-" %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size \"%s\" should be the Adobe standard name \"%s\".";
+" %s Size \"%s\" defined for %s but not for %s." = " %s Size “%s” defined for %s but not for %s.";
+" %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size “%s” has unexpected dimensions (%gx%g).";
+" %s Size \"%s\" should be \"%s\"." = " %s Size “%s” should be “%s”.";
+" %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size “%s” should be the Adobe standard name “%s”.";
" %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s.";
" %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop.";
" %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options.";
" **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5.";
" **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15.";
" **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15.";
-" **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3.";
-" **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3.";
+" **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion “%s”\n REF: Page 56, section 5.3.";
+" **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion “%s”\n REF: Page 56, section 5.3.";
" **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4.";
" **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1.";
" **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English.";
-" **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1.";
-" **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3.";
-" **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3.";
-" **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3.";
+" **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be “%s”)\n REF: Page 211, table D.1.";
+" **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - “%c” not allowed in string.\n REF: Pages 59-60, section 5.3.";
+" **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not “(string) int”.\n REF: Pages 62-64, section 5.3.";
+" **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not “(string)”.\n REF: Page 62, section 5.3.";
" **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3.";
" **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9";
" **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s";
" **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3.";
" **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d.";
" %d ERRORS FOUND" = " %d ERRORS FOUND";
-" -h Show program usage" = " -h Show program usage";
-" Bad %%%%BoundingBox: on line %d.\n REF: Page 39, %%%%BoundingBox:" = " Bad %%%%BoundingBox: on line %d.\n REF: Page 39, %%%%BoundingBox:";
-" Bad %%%%Page: on line %d.\n REF: Page 53, %%%%Page:" = " Bad %%%%Page: on line %d.\n REF: Page 53, %%%%Page:";
-" Bad %%%%Pages: on line %d.\n REF: Page 43, %%%%Pages:" = " Bad %%%%Pages: on line %d.\n REF: Page 43, %%%%Pages:";
-" Line %d is longer than 255 characters (%d).\n REF: Page 25, Line Length" = " Line %d is longer than 255 characters (%d).\n REF: Page 25, Line Length";
-" Missing %!PS-Adobe-3.0 on first line.\n REF: Page 17, 3.1 Conforming Documents" = " Missing %!PS-Adobe-3.0 on first line.\n REF: Page 17, 3.1 Conforming Documents";
-" Missing %%EndComments comment. REF: Page 41, %%EndComments" = " Missing %%EndComments comment. REF: Page 41, %%EndComments";
-" Missing or bad %%BoundingBox: comment.\n REF: Page 39, %%BoundingBox:" = " Missing or bad %%BoundingBox: comment.\n REF: Page 39, %%BoundingBox:";
-" Missing or bad %%Page: comments.\n REF: Page 53, %%Page:" = " Missing or bad %%Page: comments.\n REF: Page 53, %%Page:";
-" Missing or bad %%Pages: comment.\n REF: Page 43, %%Pages:" = " Missing or bad %%Pages: comment.\n REF: Page 43, %%Pages:";
" NO ERRORS FOUND" = " NO ERRORS FOUND";
-" Saw %d lines that exceeded 255 characters." = " Saw %d lines that exceeded 255 characters.";
-" Too many %%BeginDocument comments." = " Too many %%BeginDocument comments.";
-" Too many %%EndDocument comments." = " Too many %%EndDocument comments.";
-" Warning: file contains binary data." = " Warning: file contains binary data.";
-" Warning: no %%EndComments comment in file." = " Warning: no %%EndComments comment in file.";
-" Warning: obsolete DSC version %.1f in file." = " Warning: obsolete DSC version %.1f in file.";
-" ! expression Unary NOT of expression." = " ! expression Unary NOT of expression.";
-" ( expressions ) Group expressions." = " ( expressions ) Group expressions.";
-" --[no-]debug-logging Turn debug logging on/off." = " --[no-]debug-logging Turn debug logging on/off.";
-" --[no-]remote-admin Turn remote administration on/off." = " --[no-]remote-admin Turn remote administration on/off.";
-" --[no-]remote-any Allow/prevent access from the Internet." = " --[no-]remote-any Allow/prevent access from the Internet.";
-" --[no-]share-printers Turn printer sharing on/off." = " --[no-]share-printers Turn printer sharing on/off.";
-" --[no-]user-cancel-any Allow/prevent users to cancel any job." = " --[no-]user-cancel-any Allow/prevent users to cancel any job.";
" --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9).";
" --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows).";
-" --domain regex Match domain to regular expression." = " --domain regex Match domain to regular expression.";
-" --exec utility [argument ...] ;\n Execute program if true." = " --exec utility [argument ...] ;\n Execute program if true.";
-" --false Always false." = " --false Always false.";
-" --help Show this help." = " --help Show this help.";
-" --host regex Match hostname to regular expression." = " --host regex Match hostname to regular expression.";
-" --lf End lines with LF (UNIX/Linux/OS X)." = " --lf End lines with LF (UNIX/Linux/OS X).";
-" --local True if service is local." = " --local True if service is local.";
-" --ls List attributes." = " --ls List attributes.";
-" --name regex Match service name to regular expression." = " --name regex Match service name to regular expression.";
-" --not expression Unary NOT of expression." = " --not expression Unary NOT of expression.";
-" --path regex Match resource path to regular expression." = " --path regex Match resource path to regular expression.";
-" --port number[-number] Match port to number or range." = " --port number[-number] Match port to number or range.";
-" --print Print URI if true." = " --print Print URI if true.";
-" --print-name Print service name if true." = " --print-name Print service name if true.";
-" --quiet Quietly report match via exit code." = " --quiet Quietly report match via exit code.";
-" --remote True if service is remote." = " --remote True if service is remote.";
-" --true Always true." = " --true Always true.";
-" --txt key True if the TXT record contains the key." = " --txt key True if the TXT record contains the key.";
-" --txt-* regex Match TXT record key to regular expression." = " --txt-* regex Match TXT record key to regular expression.";
-" --uri regex Match URI to regular expression." = " --uri regex Match URI to regular expression.";
-" --version Show program version." = " --version Show program version.";
-" -4 Connect using IPv4." = " -4 Connect using IPv4.";
-" -6 Connect using IPv6." = " -6 Connect using IPv6.";
-" -C Send requests using chunking (default)." = " -C Send requests using chunking (default).";
+" --lf End lines with LF (UNIX/Linux/macOS)." = " --lf End lines with LF (UNIX/Linux/macOS).";
+" --list-filters List filters that will be used." = " --list-filters List filters that will be used.";
" -D Remove the input file when finished." = " -D Remove the input file when finished.";
" -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
-" -E Encrypt the connection." = " -E Encrypt the connection.";
-" -E Test with HTTP Upgrade to TLS." = " -E Test with HTTP Upgrade to TLS.";
-" -F Run in the foreground but detach from console." = " -F Run in the foreground but detach from console.";
-" -H samba-server Use the named SAMBA server." = " -H samba-server Use the named SAMBA server.";
-" -I Ignore errors." = " -I Ignore errors.";
" -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
-" -I {filename,filters,none,profiles}" = " -I {filename,filters,none,profiles}";
-" -L Send requests using content-length." = " -L Send requests using content-length.";
" -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file.";
-" -P number[-number] Match port to number or range." = " -P number[-number] Match port to number or range.";
-" -R root-directory Set alternate root." = " -R root-directory Set alternate root.";
-" -S Test with SSL encryption." = " -S Test with SSL encryption.";
-" -T seconds Set the browse timeout in seconds." = " -T seconds Set the browse timeout in seconds.";
-" -T seconds Set the receive/send timeout in seconds." = " -T seconds Set the receive/send timeout in seconds.";
" -U username Specify username." = " -U username Specify username.";
-" -V version Set default IPP version." = " -V version Set default IPP version.";
-" -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}" = " -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}";
-" -X Produce XML plist instead of plain text." = " -X Produce XML plist instead of plain text.";
-" -a Browse for all services." = " -a Browse for all services.";
-" -a Export all printers." = " -a Export all printers.";
" -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog.";
-" -c cupsd.conf Set cupsd.conf file to use." = " -c cupsd.conf Set cupsd.conf file to use.";
-" -d domain Browse/resolve in specified domain." = " -d domain Browse/resolve in specified domain.";
-" -d name=value Set named variable to value." = " -d name=value Set named variable to value.";
+" -c cups-files.conf Set cups-files.conf file to use." = " -c cups-files.conf Set cups-files.conf file to use.";
" -d output-dir Specify the output directory." = " -d output-dir Specify the output directory.";
" -d printer Use the named printer." = " -d printer Use the named printer.";
-" -d regex Match domain to regular expression." = " -d regex Match domain to regular expression.";
" -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
-" -f Run in the foreground." = " -f Run in the foreground.";
-" -f filename Set default request filename." = " -f filename Set default request filename.";
-" -h Show this usage message." = " -h Show this usage message.";
-" -h regex Match hostname to regular expression." = " -h regex Match hostname to regular expression.";
-" -h server[:port] Specify server address." = " -h server[:port] Specify server address.";
" -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed).";
-" -i seconds Repeat the last file with the given time interval." = " -i seconds Repeat the last file with the given time interval.";
" -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1).";
-" -l List attributes." = " -l List attributes.";
-" -l Run cupsd from launchd(8)." = " -l Run cupsd from launchd(8).";
-" -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,...] Specify the output language(s) (locale).";
+" -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,…] Specify the output language(s) (locale).";
" -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename.";
" -m mime/type Set output MIME type (otherwise application/pdf)." = " -m mime/type Set output MIME type (otherwise application/pdf).";
" -n copies Set number of copies." = " -n copies Set number of copies.";
-" -n count Repeat the last file the given number of times." = " -n count Repeat the last file the given number of times.";
-" -n regex Match service name to regular expression." = " -n regex Match service name to regular expression.";
" -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv).";
" -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout).";
" -o name=value Set option(s)." = " -o name=value Set option(s).";
-" -p Print URI if true." = " -p Print URI if true.";
" -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file.";
-" -p program Run specified program for each service." = " -p program Run specified program for each service.";
-" -q Quietly report match via exit code." = " -q Quietly report match via exit code.";
-" -q Run silently." = " -q Run silently.";
-" -r True if service is remote." = " -r True if service is remote.";
-" -r Use 'relaxed' open mode." = " -r Use 'relaxed' open mode.";
-" -s Print service name if true." = " -s Print service name if true.";
-" -t Produce a test report." = " -t Produce a test report.";
" -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them.";
-" -t Test the configuration file." = " -t Test the configuration file.";
-" -t key True if the TXT record contains the key." = " -t key True if the TXT record contains the key.";
" -t title Set title." = " -t title Set title.";
-" -t type Browse/resolve with specified type." = " -t type Browse/resolve with specified type.";
" -u Remove the PPD file when finished." = " -u Remove the PPD file when finished.";
-" -u regex Match URI to regular expression." = " -u regex Match URI to regular expression.";
" -v Be verbose." = " -v Be verbose.";
-" -vv Be very verbose." = " -vv Be very verbose.";
-" -x utility [argument ...] ;\n Execute program if true." = " -x utility [argument ...] ;\n Execute program if true.";
" -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip.";
-" IPPFIND_SERVICE_DOMAIN Domain name" = " IPPFIND_SERVICE_DOMAIN Domain name";
-" IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = " IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name";
-" IPPFIND_SERVICE_NAME Service instance name" = " IPPFIND_SERVICE_NAME Service instance name";
-" IPPFIND_SERVICE_PORT Port number" = " IPPFIND_SERVICE_PORT Port number";
-" IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = " IPPFIND_SERVICE_REGTYPE DNS-SD registration type";
-" IPPFIND_SERVICE_SCHEME URI scheme" = " IPPFIND_SERVICE_SCHEME URI scheme";
-" IPPFIND_SERVICE_URI URI" = " IPPFIND_SERVICE_URI URI";
-" IPPFIND_TXT_* Value of TXT record key" = " IPPFIND_TXT_* Value of TXT record key";
-" expression --and expression\n Logical AND." = " expression --and expression\n Logical AND.";
-" expression --or expression\n Logical OR." = " expression --or expression\n Logical OR.";
-" expression expression Logical AND." = " expression expression Logical AND.";
-" {service_domain} Domain name" = " {service_domain} Domain name";
-" {service_hostname} Fully-qualified domain name" = " {service_hostname} Fully-qualified domain name";
-" {service_name} Service instance name" = " {service_name} Service instance name";
-" {service_port} Port number" = " {service_port} Port number";
-" {service_regtype} DNS-SD registration type" = " {service_regtype} DNS-SD registration type";
-" {service_scheme} URI scheme" = " {service_scheme} URI scheme";
-" {service_uri} URI" = " {service_uri} URI";
-" {txt_*} Value of TXT record key" = " {txt_*} Value of TXT record key";
-" {} URI" = " {} URI";
" FAIL" = " FAIL";
" PASS" = " PASS";
-"\"%s\": Bad URI value \"%s\" - %s (RFC 2911 section 4.1.5)." = "\"%s\": Bad URI value \"%s\" - %s (RFC 2911 section 4.1.5).";
-"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 2911 section 4.1.5)." = "\"%s\": Bad URI value \"%s\" - bad length %d (RFC 2911 section 4.1.5).";
-"\"%s\": Bad attribute name - bad length %d (RFC 2911 section 4.1.3)." = "\"%s\": Bad attribute name - bad length %d (RFC 2911 section 4.1.3).";
-"\"%s\": Bad attribute name - invalid character (RFC 2911 section 4.1.3)." = "\"%s\": Bad attribute name - invalid character (RFC 2911 section 4.1.3).";
-"\"%s\": Bad boolen value %d (RFC 2911 section 4.1.11)." = "\"%s\": Bad boolen value %d (RFC 2911 section 4.1.11).";
-"\"%s\": Bad charset value \"%s\" - bad characters (RFC 2911 section 4.1.7)." = "\"%s\": Bad charset value \"%s\" - bad characters (RFC 2911 section 4.1.7).";
-"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 2911 section 4.1.7)." = "\"%s\": Bad charset value \"%s\" - bad length %d (RFC 2911 section 4.1.7).";
-"\"%s\": Bad dateTime UTC hours %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime UTC hours %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime UTC minutes %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime UTC minutes %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime UTC sign '%c' (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime UTC sign '%c' (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime day %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime day %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime deciseconds %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime deciseconds %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime hours %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime hours %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime minutes %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime minutes %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime month %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime month %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad dateTime seconds %u (RFC 2911 section 4.1.14)." = "\"%s\": Bad dateTime seconds %u (RFC 2911 section 4.1.14).";
-"\"%s\": Bad enum value %d - out of range (RFC 2911 section 4.1.4)." = "\"%s\": Bad enum value %d - out of range (RFC 2911 section 4.1.4).";
-"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 2911 section 4.1.3)." = "\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 2911 section 4.1.3).";
-"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 2911 section 4.1.3)." = "\"%s\": Bad keyword value \"%s\" - invalid character (RFC 2911 section 4.1.3).";
-"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 2911 section 4.1.9)." = "\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 2911 section 4.1.9).";
-"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 2911 section 4.1.9)." = "\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 2911 section 4.1.9).";
-"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 2911 section 4.1.2)." = "\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 2911 section 4.1.2).";
-"\"%s\": Bad name value \"%s\" - bad length %d (RFC 2911 section 4.1.2)." = "\"%s\": Bad name value \"%s\" - bad length %d (RFC 2911 section 4.1.2).";
-"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 2911 section 4.1.8)." = "\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 2911 section 4.1.8).";
-"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 2911 section 4.1.8)." = "\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 2911 section 4.1.8).";
-"\"%s\": Bad octetString value - bad length %d (RFC 2911 section 4.1.10)." = "\"%s\": Bad octetString value - bad length %d (RFC 2911 section 4.1.10).";
-"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 2911 section 4.1.13)." = "\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 2911 section 4.1.13).";
-"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 2911 section 4.1.15)." = "\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 2911 section 4.1.15).";
-"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 2911 section 4.1.15)." = "\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 2911 section 4.1.15).";
-"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 2911 section 4.1.15)." = "\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 2911 section 4.1.15).";
-"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 2911 section 4.1.1)." = "\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 2911 section 4.1.1).";
-"\"%s\": Bad text value \"%s\" - bad length %d (RFC 2911 section 4.1.1)." = "\"%s\": Bad text value \"%s\" - bad length %d (RFC 2911 section 4.1.1).";
-"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 2911 section 4.1.6)." = "\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 2911 section 4.1.6).";
-"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 2911 section 4.1.6)." = "\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 2911 section 4.1.6).";
-"%-6s %-10.10s %-4d %-10d %-27.27s %.0f bytes" = "%-6s %-10.10s %-4d %-10d %-27.27s %.0f bytes";
+"! expression Unary NOT of expression" = "! expression Unary NOT of expression";
+"\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6).";
+"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6).";
+"\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4).";
+"\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4).";
+"\"%s\": Bad boolean value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolean value %d (RFC 8011 section 5.1.21).";
+"\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8).";
+"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8).";
+"\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15).";
+"\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5).";
+"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4).";
+"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4).";
+"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10).";
+"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10).";
+"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3).";
+"\"%s\": Bad name value \"%s\" - bad control character (PWG 5100.14 section 8.1)." = "“%s”: Bad name value “%s” - bad control character (PWG 5100.14 section 8.1).";
+"\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3).";
+"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9).";
+"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9).";
+"\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20).";
+"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14).";
+"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16).";
+"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16).";
+"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16).";
+"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2).";
+"\"%s\": Bad text value \"%s\" - bad control character (PWG 5100.14 section 8.3)." = "“%s”: Bad text value “%s” - bad control character (PWG 5100.14 section 8.3).";
+"\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2).";
+"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7).";
+"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7).";
+"\"requesting-user-name\" attribute in wrong group." = "“requesting-user-name” attribute in wrong group.";
+"\"requesting-user-name\" attribute with wrong syntax." = "“requesting-user-name” attribute with wrong syntax.";
"%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes";
+"%d x %d mm" = "%d x %d mm";
+"%g x %g \"" = "%g x %g ″";
+"%s (%s)" = "%s (%s)";
+"%s (%s, %s)" = "%s (%s, %s)";
+"%s (Borderless)" = "%s (Borderless)";
+"%s (Borderless, %s)" = "%s (Borderless, %s)";
+"%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)";
"%s accepting requests since %s" = "%s accepting requests since %s";
"%s cannot be changed." = "%s cannot be changed.";
"%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc.";
// TRANSLATORS: Message is "subject: error"
"%s: %s" = "%s: %s";
"%s: %s failed: %s" = "%s: %s failed: %s";
-"%s: Bad version %s for \"-V\"." = "%s: Bad version %s for \"-V\".";
-"%s: Don't know what to do." = "%s: Don't know what to do.";
-"%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination \"%s\".";
-"%s: Error - add '/version=1.1' to server name." = "%s: Error - add '/version=1.1' to server name.";
+"%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”.";
+"%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”.";
+"%s: Don't know what to do." = "%s: Don’t know what to do.";
+"%s: Error - %s" = "%s: Error - %s";
+"%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”.";
+"%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name.";
"%s: Error - bad job ID." = "%s: Error - bad job ID.";
"%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously.";
"%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided.";
-"%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after \"-S\" option.";
-"%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after \"-T\" option.";
-"%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after \"-#\" option.";
-"%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after \"-n\" option.";
-"%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after \"-P\" option.";
-"%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after \"-d\" option.";
-"%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after \"-f\" option.";
-"%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after \"-H\" option.";
-"%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after \"-H\" option.";
-"%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after \"-h\" option.";
-"%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after \"-y\" option.";
-"%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after \"-%c\" option.";
-"%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after \"-o\" option.";
-"%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after \"-P\" option.";
-"%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after \"-%c\" option.";
-"%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after \"-r\" option.";
-"%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after \"-t\" option.";
-"%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after \"-U\" option.";
-"%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after \"-u\" option.";
-"%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after \"-%c\" option.";
-"%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option.";
+"%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more.";
+"%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option.";
+"%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option.";
+"%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option.";
+"%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option.";
+"%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option.";
+"%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option.";
+"%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option.";
+"%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option.";
+"%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option.";
+"%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option.";
+"%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option.";
+"%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option.";
+"%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option.";
+"%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option.";
+"%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option.";
+"%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option.";
+"%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option.";
+"%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option.";
+"%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option.";
+"%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option.";
+"%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, or “all” after “-W” option.";
"%s: Error - no default destination available." = "%s: Error - no default destination available.";
"%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100.";
"%s: Error - scheduler not responding." = "%s: Error - scheduler not responding.";
-"%s: Error - too many files - \"%s\"." = "%s: Error - too many files - \"%s\".";
-"%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access \"%s\" - %s";
+"%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”.";
+"%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s";
"%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s.";
-"%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination \"%s\".";
-"%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination \"%s/%s\".";
-"%s: Error - unknown option \"%c\"." = "%s: Error - unknown option \"%c\".";
-"%s: Error - unknown option \"%s\"." = "%s: Error - unknown option \"%s\".";
-"%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after \"-i\" option.";
-"%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list \"%s\".";
-"%s: Invalid filter string \"%s\"." = "%s: Invalid filter string \"%s\".";
-"%s: Missing timeout for \"-T\"." = "%s: Missing timeout for \"-T\".";
-"%s: Missing version for \"-V\"." = "%s: Missing version for \"-V\".";
-"%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (\"-i jobid\") before \"-H restart\".";
+"%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”.";
+"%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”.";
+"%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”.";
+"%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”.";
+"%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option.";
+"%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”.";
+"%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”.";
+"%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”.";
+"%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”.";
+"%s: Missing version for \"-V\"." = "%s: Missing version for “-V”.";
+"%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”.";
"%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s.";
"%s: Operation failed: %s" = "%s: Operation failed: %s";
"%s: Sorry, no encryption support." = "%s: Sorry, no encryption support.";
+"%s: Unable to connect to \"%s:%d\": %s" = "%s: Unable to connect to “%s:%d”: %s";
"%s: Unable to connect to server." = "%s: Unable to connect to server.";
"%s: Unable to contact server." = "%s: Unable to contact server.";
-"%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of \"%s\".";
+"%s: Unable to create PPD file: %s" = "%s: Unable to create PPD file: %s";
+"%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”.";
+"%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s";
"%s: Unable to open %s: %s" = "%s: Unable to open %s: %s";
"%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d.";
-"%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from \"%s\" or \"%s\".";
-"%s: Unknown destination \"%s\"." = "%s: Unknown destination \"%s\".";
+"%s: Unable to query printer: %s" = "%s: Unable to query printer: %s";
+"%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”.";
+"%s: Unable to resolve \"%s\"." = "%s: Unable to resolve “%s”.";
+"%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”.";
+"%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”.";
"%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s.";
-"%s: Unknown option \"%c\"." = "%s: Unknown option \"%c\".";
-"%s: Unknown option \"%s\"." = "%s: Unknown option \"%s\".";
-"%s: Unknown option \"-%c\"." = "%s: Unknown option \"-%c\".";
+"%s: Unknown option \"%c\"." = "%s: Unknown option “%c”.";
+"%s: Unknown option \"%s\"." = "%s: Unknown option “%s”.";
+"%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”.";
"%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s.";
-"%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - \"%c\" format modifier not supported - output may not be correct.";
+"%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct.";
"%s: Warning - character set option ignored." = "%s: Warning - character set option ignored.";
"%s: Warning - content type option ignored." = "%s: Warning - content type option ignored.";
"%s: Warning - form option ignored." = "%s: Warning - form option ignored.";
"%s: Warning - mode option ignored." = "%s: Warning - mode option ignored.";
+"( expressions ) Group expressions" = "( expressions ) Group expressions";
+"- Cancel all jobs" = "- Cancel all jobs";
+"-# num-copies Specify the number of copies to print" = "-# num-copies Specify the number of copies to print";
+"--[no-]debug-logging Turn debug logging on/off" = "--[no-]debug-logging Turn debug logging on/off";
+"--[no-]remote-admin Turn remote administration on/off" = "--[no-]remote-admin Turn remote administration on/off";
+"--[no-]remote-any Allow/prevent access from the Internet" = "--[no-]remote-any Allow/prevent access from the Internet";
+"--[no-]share-printers Turn printer sharing on/off" = "--[no-]share-printers Turn printer sharing on/off";
+"--[no-]user-cancel-any Allow/prevent users to cancel any job" = "--[no-]user-cancel-any Allow/prevent users to cancel any job";
+"--device-id device-id Show models matching the given IEEE 1284 device ID" = "--device-id device-id Show models matching the given IEEE 1284 device ID";
+"--domain regex Match domain to regular expression" = "--domain regex Match domain to regular expression";
+"--exclude-schemes scheme-list\n Exclude the specified URI schemes" = "--exclude-schemes scheme-list\n Exclude the specified URI schemes";
+"--exec utility [argument ...] ;\n Execute program if true" = "--exec utility [argument …] ;\n Execute program if true";
+"--false Always false" = "--false Always false";
+"--help Show program help" = "--help Show program help";
+"--hold Hold new jobs" = "--hold Hold new jobs";
+"--host regex Match hostname to regular expression" = "--host regex Match hostname to regular expression";
+"--include-schemes scheme-list\n Include only the specified URI schemes" = "--include-schemes scheme-list\n Include only the specified URI schemes";
+"--ippserver filename Produce ippserver attribute file" = "--ippserver filename Produce ippserver attribute file";
+"--language locale Show models matching the given locale" = "--language locale Show models matching the given locale";
+"--local True if service is local" = "--local True if service is local";
+"--ls List attributes" = "--ls List attributes";
+"--make-and-model name Show models matching the given make and model name" = "--make-and-model name Show models matching the given make and model name";
+"--name regex Match service name to regular expression" = "--name regex Match service name to regular expression";
+"--no-web-forms Disable web forms for media and supplies" = "--no-web-forms Disable web forms for media and supplies";
+"--not expression Unary NOT of expression" = "--not expression Unary NOT of expression";
+"--path regex Match resource path to regular expression" = "--path regex Match resource path to regular expression";
+"--port number[-number] Match port to number or range" = "--port number[-number] Match port to number or range";
+"--print Print URI if true" = "--print Print URI if true";
+"--print-name Print service name if true" = "--print-name Print service name if true";
+"--product name Show models matching the given PostScript product" = "--product name Show models matching the given PostScript product";
+"--quiet Quietly report match via exit code" = "--quiet Quietly report match via exit code";
+"--release Release previously held jobs" = "--release Release previously held jobs";
+"--remote True if service is remote" = "--remote True if service is remote";
+"--stop-after-include-error\n Stop tests after a failed INCLUDE" = "--stop-after-include-error\n Stop tests after a failed INCLUDE";
+"--timeout seconds Specify the maximum number of seconds to discover devices" = "--timeout seconds Specify the maximum number of seconds to discover devices";
+"--true Always true" = "--true Always true";
+"--txt key True if the TXT record contains the key" = "--txt key True if the TXT record contains the key";
+"--txt-* regex Match TXT record key to regular expression" = "--txt-* regex Match TXT record key to regular expression";
+"--uri regex Match URI to regular expression" = "--uri regex Match URI to regular expression";
+"--version Show program version" = "--version Show program version";
+"--version Show version" = "--version Show version";
"-1" = "-1";
"-10" = "-10";
"-100" = "-100";
"-14" = "-14";
"-15" = "-15";
"-2" = "-2";
+"-2 Set 2-sided printing support (default=1-sided)" = "-2 Set 2-sided printing support (default=1-sided)";
"-20" = "-20";
"-25" = "-25";
"-3" = "-3";
"-30" = "-30";
"-35" = "-35";
"-4" = "-4";
+"-4 Connect using IPv4" = "-4 Connect using IPv4";
"-40" = "-40";
"-45" = "-45";
"-5" = "-5";
"-50" = "-50";
"-55" = "-55";
"-6" = "-6";
+"-6 Connect using IPv6" = "-6 Connect using IPv6";
"-60" = "-60";
"-65" = "-65";
"-7" = "-7";
"-9" = "-9";
"-90" = "-90";
"-95" = "-95";
+"-C Send requests using chunking (default)" = "-C Send requests using chunking (default)";
+"-D description Specify the textual description of the printer" = "-D description Specify the textual description of the printer";
+"-D device-uri Set the device URI for the printer" = "-D device-uri Set the device URI for the printer";
+"-E Enable and accept jobs on the printer (after -p)" = "-E Enable and accept jobs on the printer (after -p)";
+"-E Encrypt the connection to the server" = "-E Encrypt the connection to the server";
+"-E Test with encryption using HTTP Upgrade to TLS" = "-E Test with encryption using HTTP Upgrade to TLS";
+"-F Run in the foreground but detach from console." = "-F Run in the foreground but detach from console.";
+"-F output-type/subtype Set the output format for the printer" = "-F output-type/subtype Set the output format for the printer";
+"-H Show the default server and port" = "-H Show the default server and port";
+"-H HH:MM Hold the job until the specified UTC time" = "-H HH:MM Hold the job until the specified UTC time";
+"-H hold Hold the job until released/resumed" = "-H hold Hold the job until released/resumed";
+"-H immediate Print the job as soon as possible" = "-H immediate Print the job as soon as possible";
+"-H restart Reprint the job" = "-H restart Reprint the job";
+"-H resume Resume a held job" = "-H resume Resume a held job";
+"-H server[:port] Connect to the named server and port" = "-H server[:port] Connect to the named server and port";
+"-I Ignore errors" = "-I Ignore errors";
+"-I {filename,filters,none,profiles}\n Ignore specific warnings" = "-I {filename,filters,none,profiles}\n Ignore specific warnings";
+"-K keypath Set location of server X.509 certificates and keys." = "-K keypath Set location of server X.509 certificates and keys.";
+"-L Send requests using content-length" = "-L Send requests using content-length";
+"-L location Specify the textual location of the printer" = "-L location Specify the textual location of the printer";
+"-M manufacturer Set manufacturer name (default=Test)" = "-M manufacturer Set manufacturer name (default=Test)";
+"-P destination Show status for the specified destination" = "-P destination Show status for the specified destination";
+"-P destination Specify the destination" = "-P destination Specify the destination";
+"-P filename.plist Produce XML plist to a file and test report to standard output" = "-P filename.plist Produce XML plist to a file and test report to standard output";
+"-P filename.ppd Load printer attributes from PPD file" = "-P filename.ppd Load printer attributes from PPD file";
+"-P number[-number] Match port to number or range" = "-P number[-number] Match port to number or range";
+"-P page-list Specify a list of pages to print" = "-P page-list Specify a list of pages to print";
+"-R Show the ranking of jobs" = "-R Show the ranking of jobs";
+"-R name-default Remove the default value for the named option" = "-R name-default Remove the default value for the named option";
+"-R root-directory Set alternate root" = "-R root-directory Set alternate root";
+"-S Test with encryption using HTTPS" = "-S Test with encryption using HTTPS";
+"-T seconds Set the browse timeout in seconds" = "-T seconds Set the browse timeout in seconds";
+"-T seconds Set the receive/send timeout in seconds" = "-T seconds Set the receive/send timeout in seconds";
+"-T title Specify the job title" = "-T title Specify the job title";
+"-U username Specify the username to use for authentication" = "-U username Specify the username to use for authentication";
+"-U username Specify username to use for authentication" = "-U username Specify username to use for authentication";
+"-V version Set default IPP version" = "-V version Set default IPP version";
+"-W completed Show completed jobs" = "-W completed Show completed jobs";
+"-W not-completed Show pending jobs" = "-W not-completed Show pending jobs";
+"-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors" = "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors";
+"-X Produce XML plist instead of plain text" = "-X Produce XML plist instead of plain text";
+"-a Cancel all jobs" = "-a Cancel all jobs";
+"-a Show jobs on all destinations" = "-a Show jobs on all destinations";
+"-a [destination(s)] Show the accepting state of destinations" = "-a [destination(s)] Show the accepting state of destinations";
+"-a filename.conf Load printer attributes from conf file" = "-a filename.conf Load printer attributes from conf file";
+"-c Make a copy of the print file(s)" = "-c Make a copy of the print file(s)";
+"-c Produce CSV output" = "-c Produce CSV output";
+"-c [class(es)] Show classes and their member printers" = "-c [class(es)] Show classes and their member printers";
+"-c class Add the named destination to a class" = "-c class Add the named destination to a class";
+"-c command Set print command" = "-c command Set print command";
+"-c cupsd.conf Set cupsd.conf file to use." = "-c cupsd.conf Set cupsd.conf file to use.";
+"-d Show the default destination" = "-d Show the default destination";
+"-d destination Set default destination" = "-d destination Set default destination";
+"-d destination Set the named destination as the server default" = "-d destination Set the named destination as the server default";
+"-d name=value Set named variable to value" = "-d name=value Set named variable to value";
+"-d regex Match domain to regular expression" = "-d regex Match domain to regular expression";
+"-d spool-directory Set spool directory" = "-d spool-directory Set spool directory";
+"-e Show available destinations on the network" = "-e Show available destinations on the network";
+"-f Run in the foreground." = "-f Run in the foreground.";
+"-f filename Set default request filename" = "-f filename Set default request filename";
+"-f type/subtype[,...] Set supported file types" = "-f type/subtype[,…] Set supported file types";
+"-h Show this usage message." = "-h Show this usage message.";
+"-h Validate HTTP response headers" = "-h Validate HTTP response headers";
+"-h regex Match hostname to regular expression" = "-h regex Match hostname to regular expression";
+"-h server[:port] Connect to the named server and port" = "-h server[:port] Connect to the named server and port";
+"-i iconfile.png Set icon file" = "-i iconfile.png Set icon file";
+"-i id Specify an existing job ID to modify" = "-i id Specify an existing job ID to modify";
+"-i ppd-file Specify a PPD file for the printer" = "-i ppd-file Specify a PPD file for the printer";
+"-i seconds Repeat the last file with the given time interval" = "-i seconds Repeat the last file with the given time interval";
+"-k Keep job spool files" = "-k Keep job spool files";
+"-l List attributes" = "-l List attributes";
+"-l Produce plain text output" = "-l Produce plain text output";
+"-l Run cupsd on demand." = "-l Run cupsd on demand.";
+"-l Show supported options and values" = "-l Show supported options and values";
+"-l Show verbose (long) output" = "-l Show verbose (long) output";
+"-l location Set location of printer" = "-l location Set location of printer";
+"-m Send an email notification when the job completes" = "-m Send an email notification when the job completes";
+"-m Show models" = "-m Show models";
+"-m everywhere Specify the printer is compatible with IPP Everywhere" = "-m everywhere Specify the printer is compatible with IPP Everywhere";
+"-m model Set model name (default=Printer)" = "-m model Set model name (default=Printer)";
+"-m model Specify a standard model/PPD file for the printer" = "-m model Specify a standard model/PPD file for the printer";
+"-n count Repeat the last file the given number of times" = "-n count Repeat the last file the given number of times";
+"-n hostname Set hostname for printer" = "-n hostname Set hostname for printer";
+"-n num-copies Specify the number of copies to print" = "-n num-copies Specify the number of copies to print";
+"-n regex Match service name to regular expression" = "-n regex Match service name to regular expression";
+"-o Name=Value Specify the default value for the named PPD option " = "-o Name=Value Specify the default value for the named PPD option ";
+"-o [destination(s)] Show jobs" = "-o [destination(s)] Show jobs";
+"-o cupsIPPSupplies=false\n Disable supply level reporting via IPP" = "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP";
+"-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP" = "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP";
+"-o job-k-limit=N Specify the kilobyte limit for per-user quotas" = "-o job-k-limit=N Specify the kilobyte limit for per-user quotas";
+"-o job-page-limit=N Specify the page limit for per-user quotas" = "-o job-page-limit=N Specify the page limit for per-user quotas";
+"-o job-quota-period=N Specify the per-user quota period in seconds" = "-o job-quota-period=N Specify the per-user quota period in seconds";
+"-o job-sheets=standard Print a banner page with the job" = "-o job-sheets=standard Print a banner page with the job";
+"-o media=size Specify the media size to use" = "-o media=size Specify the media size to use";
+"-o name-default=value Specify the default value for the named option" = "-o name-default=value Specify the default value for the named option";
+"-o name[=value] Set default option and value" = "-o name[=value] Set default option and value";
+"-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)" = "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)";
+"-o option[=value] Specify a printer-specific option" = "-o option[=value] Specify a printer-specific option";
+"-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation" = "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation";
+"-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)" = "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)";
+"-o printer-error-policy=name\n Specify the printer error policy" = "-o printer-error-policy=name\n Specify the printer error policy";
+"-o printer-is-shared=true\n Share the printer" = "-o printer-is-shared=true\n Share the printer";
+"-o printer-op-policy=name\n Specify the printer operation policy" = "-o printer-op-policy=name\n Specify the printer operation policy";
+"-o sides=one-sided Specify 1-sided printing" = "-o sides=one-sided Specify 1-sided printing";
+"-o sides=two-sided-long-edge\n Specify 2-sided portrait printing" = "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing";
+"-o sides=two-sided-short-edge\n Specify 2-sided landscape printing" = "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing";
+"-p Print URI if true" = "-p Print URI if true";
+"-p [printer(s)] Show the processing state of destinations" = "-p [printer(s)] Show the processing state of destinations";
+"-p destination Specify a destination" = "-p destination Specify a destination";
+"-p destination Specify/add the named destination" = "-p destination Specify/add the named destination";
+"-p port Set port number for printer" = "-p port Set port number for printer";
+"-q Quietly report match via exit code" = "-q Quietly report match via exit code";
+"-q Run silently" = "-q Run silently";
+"-q Specify the job should be held for printing" = "-q Specify the job should be held for printing";
+"-q priority Specify the priority from low (1) to high (100)" = "-q priority Specify the priority from low (1) to high (100)";
+"-r Remove the file(s) after submission" = "-r Remove the file(s) after submission";
+"-r Show whether the CUPS server is running" = "-r Show whether the CUPS server is running";
+"-r True if service is remote" = "-r True if service is remote";
+"-r Use 'relaxed' open mode" = "-r Use ‘relaxed’ open mode";
+"-r class Remove the named destination from a class" = "-r class Remove the named destination from a class";
+"-r reason Specify a reason message that others can see" = "-r reason Specify a reason message that others can see";
+"-r subtype,[subtype] Set DNS-SD service subtype" = "-r subtype,[subtype] Set DNS-SD service subtype";
+"-s Be silent" = "-s Be silent";
+"-s Print service name if true" = "-s Print service name if true";
+"-s Show a status summary" = "-s Show a status summary";
+"-s cups-files.conf Set cups-files.conf file to use." = "-s cups-files.conf Set cups-files.conf file to use.";
+"-s speed[,color-speed] Set speed in pages per minute" = "-s speed[,color-speed] Set speed in pages per minute";
+"-t Produce a test report" = "-t Produce a test report";
+"-t Show all status information" = "-t Show all status information";
+"-t Test the configuration file." = "-t Test the configuration file.";
+"-t key True if the TXT record contains the key" = "-t key True if the TXT record contains the key";
+"-t title Specify the job title" = "-t title Specify the job title";
+"-u [user(s)] Show jobs queued by the current or specified users" = "-u [user(s)] Show jobs queued by the current or specified users";
+"-u allow:all Allow all users to print" = "-u allow:all Allow all users to print";
+"-u allow:list Allow the list of users or groups (@name) to print" = "-u allow:list Allow the list of users or groups (@name) to print";
+"-u deny:list Prevent the list of users or groups (@name) to print" = "-u deny:list Prevent the list of users or groups (@name) to print";
+"-u owner Specify the owner to use for jobs" = "-u owner Specify the owner to use for jobs";
+"-u regex Match URI to regular expression" = "-u regex Match URI to regular expression";
+"-v Be verbose" = "-v Be verbose";
+"-v Show devices" = "-v Show devices";
+"-v [printer(s)] Show the devices for each destination" = "-v [printer(s)] Show the devices for each destination";
+"-v device-uri Specify the device URI for the printer" = "-v device-uri Specify the device URI for the printer";
+"-vv Be very verbose" = "-vv Be very verbose";
+"-x Purge jobs rather than just canceling" = "-x Purge jobs rather than just canceling";
+"-x destination Remove default options for destination" = "-x destination Remove default options for destination";
+"-x destination Remove the named destination" = "-x destination Remove the named destination";
+"-x utility [argument ...] ;\n Execute program if true" = "-x utility [argument …] ;\n Execute program if true";
+"/etc/cups/lpoptions file names default destination that does not exist." = "/etc/cups/lpoptions file names default destination that does not exist.";
"0" = "0";
"1" = "1";
"1 inch/sec." = "1 inch/sec.";
-"1.25x0.25\"" = "1.25x0.25\"";
-"1.25x2.25\"" = "1.25x2.25\"";
+"1.25x0.25\"" = "1.25x0.25″";
+"1.25x2.25\"" = "1.25x2.25″";
"1.5 inch/sec." = "1.5 inch/sec.";
-"1.50x0.25\"" = "1.50x0.25\"";
-"1.50x0.50\"" = "1.50x0.50\"";
-"1.50x1.00\"" = "1.50x1.00\"";
-"1.50x2.00\"" = "1.50x2.00\"";
+"1.50x0.25\"" = "1.50x0.25″";
+"1.50x0.50\"" = "1.50x0.50″";
+"1.50x1.00\"" = "1.50x1.00″";
+"1.50x2.00\"" = "1.50x2.00″";
"10" = "10";
"10 inches/sec." = "10 inches/sec.";
"10 x 11" = "10 x 11";
"2" = "2";
"2 inches/sec." = "2 inches/sec.";
"2-Sided Printing" = "2-Sided Printing";
-"2.00x0.37\"" = "2.00x0.37\"";
-"2.00x0.50\"" = "2.00x0.50\"";
-"2.00x1.00\"" = "2.00x1.00\"";
-"2.00x1.25\"" = "2.00x1.25\"";
-"2.00x2.00\"" = "2.00x2.00\"";
-"2.00x3.00\"" = "2.00x3.00\"";
-"2.00x4.00\"" = "2.00x4.00\"";
-"2.00x5.50\"" = "2.00x5.50\"";
-"2.25x0.50\"" = "2.25x0.50\"";
-"2.25x1.25\"" = "2.25x1.25\"";
-"2.25x4.00\"" = "2.25x4.00\"";
-"2.25x5.50\"" = "2.25x5.50\"";
-"2.38x5.50\"" = "2.38x5.50\"";
+"2.00x0.37\"" = "2.00x0.37″";
+"2.00x0.50\"" = "2.00x0.50″";
+"2.00x1.00\"" = "2.00x1.00″";
+"2.00x1.25\"" = "2.00x1.25″";
+"2.00x2.00\"" = "2.00x2.00″";
+"2.00x3.00\"" = "2.00x3.00″";
+"2.00x4.00\"" = "2.00x4.00″";
+"2.00x5.50\"" = "2.00x5.50″";
+"2.25x0.50\"" = "2.25x0.50″";
+"2.25x1.25\"" = "2.25x1.25″";
+"2.25x4.00\"" = "2.25x4.00″";
+"2.25x5.50\"" = "2.25x5.50″";
+"2.38x5.50\"" = "2.38x5.50″";
"2.5 inches/sec." = "2.5 inches/sec.";
-"2.50x1.00\"" = "2.50x1.00\"";
-"2.50x2.00\"" = "2.50x2.00\"";
-"2.75x1.25\"" = "2.75x1.25\"";
-"2.9 x 1\"" = "2.9 x 1\"";
+"2.50x1.00\"" = "2.50x1.00″";
+"2.50x2.00\"" = "2.50x2.00″";
+"2.75x1.25\"" = "2.75x1.25″";
+"2.9 x 1\"" = "2.9 x 1″";
"20" = "20";
"20 mm/sec." = "20 mm/sec.";
"200 mm/sec." = "200 mm/sec.";
"3" = "3";
"3 inches/sec." = "3 inches/sec.";
"3 x 5" = "3 x 5";
-"3.00x1.00\"" = "3.00x1.00\"";
-"3.00x1.25\"" = "3.00x1.25\"";
-"3.00x2.00\"" = "3.00x2.00\"";
-"3.00x3.00\"" = "3.00x3.00\"";
-"3.00x5.00\"" = "3.00x5.00\"";
-"3.25x2.00\"" = "3.25x2.00\"";
-"3.25x5.00\"" = "3.25x5.00\"";
-"3.25x5.50\"" = "3.25x5.50\"";
-"3.25x5.83\"" = "3.25x5.83\"";
-"3.25x7.83\"" = "3.25x7.83\"";
+"3.00x1.00\"" = "3.00x1.00″";
+"3.00x1.25\"" = "3.00x1.25″";
+"3.00x2.00\"" = "3.00x2.00″";
+"3.00x3.00\"" = "3.00x3.00″";
+"3.00x5.00\"" = "3.00x5.00″";
+"3.25x2.00\"" = "3.25x2.00″";
+"3.25x5.00\"" = "3.25x5.00″";
+"3.25x5.50\"" = "3.25x5.50″";
+"3.25x5.83\"" = "3.25x5.83″";
+"3.25x7.83\"" = "3.25x7.83″";
"3.5 x 5" = "3.5 x 5";
-"3.5\" Disk" = "3.5\" Disk";
-"3.50x1.00\"" = "3.50x1.00\"";
+"3.5\" Disk" = "3.5″ Disk";
+"3.50x1.00\"" = "3.50x1.00″";
"30" = "30";
"30 mm/sec." = "30 mm/sec.";
"300 mm/sec." = "300 mm/sec.";
"360x180dpi" = "360x180dpi";
"4" = "4";
"4 inches/sec." = "4 inches/sec.";
-"4.00x1.00\"" = "4.00x1.00\"";
-"4.00x13.00\"" = "4.00x13.00\"";
-"4.00x2.00\"" = "4.00x2.00\"";
-"4.00x2.50\"" = "4.00x2.50\"";
-"4.00x3.00\"" = "4.00x3.00\"";
-"4.00x4.00\"" = "4.00x4.00\"";
-"4.00x5.00\"" = "4.00x5.00\"";
-"4.00x6.00\"" = "4.00x6.00\"";
-"4.00x6.50\"" = "4.00x6.50\"";
+"4.00x1.00\"" = "4.00x1.00″";
+"4.00x13.00\"" = "4.00x13.00″";
+"4.00x2.00\"" = "4.00x2.00″";
+"4.00x2.50\"" = "4.00x2.50″";
+"4.00x3.00\"" = "4.00x3.00″";
+"4.00x4.00\"" = "4.00x4.00″";
+"4.00x5.00\"" = "4.00x5.00″";
+"4.00x6.00\"" = "4.00x6.00″";
+"4.00x6.50\"" = "4.00x6.50″";
"40" = "40";
"40 mm/sec." = "40 mm/sec.";
"45" = "45";
"55" = "55";
"6" = "6";
"6 inches/sec." = "6 inches/sec.";
-"6.00x1.00\"" = "6.00x1.00\"";
-"6.00x2.00\"" = "6.00x2.00\"";
-"6.00x3.00\"" = "6.00x3.00\"";
-"6.00x4.00\"" = "6.00x4.00\"";
-"6.00x5.00\"" = "6.00x5.00\"";
-"6.00x6.00\"" = "6.00x6.00\"";
-"6.00x6.50\"" = "6.00x6.50\"";
+"6.00x1.00\"" = "6.00x1.00″";
+"6.00x2.00\"" = "6.00x2.00″";
+"6.00x3.00\"" = "6.00x3.00″";
+"6.00x4.00\"" = "6.00x4.00″";
+"6.00x5.00\"" = "6.00x5.00″";
+"6.00x6.00\"" = "6.00x6.00″";
+"6.00x6.50\"" = "6.00x6.50″";
"60" = "60";
"60 mm/sec." = "60 mm/sec.";
"600dpi" = "600dpi";
"7 inches/sec." = "7 inches/sec.";
"7 x 9" = "7 x 9";
"70" = "70";
-"720dpi" = "720dpi";
"75" = "75";
"8" = "8";
"8 inches/sec." = "8 inches/sec.";
"8 x 10" = "8 x 10";
-"8.00x1.00\"" = "8.00x1.00\"";
-"8.00x2.00\"" = "8.00x2.00\"";
-"8.00x3.00\"" = "8.00x3.00\"";
-"8.00x4.00\"" = "8.00x4.00\"";
-"8.00x5.00\"" = "8.00x5.00\"";
-"8.00x6.00\"" = "8.00x6.00\"";
-"8.00x6.50\"" = "8.00x6.50\"";
+"8.00x1.00\"" = "8.00x1.00″";
+"8.00x2.00\"" = "8.00x2.00″";
+"8.00x3.00\"" = "8.00x3.00″";
+"8.00x4.00\"" = "8.00x4.00″";
+"8.00x5.00\"" = "8.00x5.00″";
+"8.00x6.00\"" = "8.00x6.00″";
+"8.00x6.50\"" = "8.00x6.50″";
"80" = "80";
"80 mm/sec." = "80 mm/sec.";
"85" = "85";
"90" = "90";
"95" = "95";
"?Invalid help command unknown." = "?Invalid help command unknown.";
-"A Samba password is required to export printer drivers" = "A Samba password is required to export printer drivers";
-"A Samba username is required to export printer drivers" = "A Samba username is required to export printer drivers";
-"A class named \"%s\" already exists." = "A class named \"%s\" already exists.";
-"A printer named \"%s\" already exists." = "A printer named \"%s\" already exists.";
+"A class named \"%s\" already exists." = "A class named “%s” already exists.";
+"A printer named \"%s\" already exists." = "A printer named “%s” already exists.";
"A0" = "A0";
"A0 Long Edge" = "A0 Long Edge";
"A1" = "A1";
"Accepted" = "Accepted";
"Add Class" = "Add Class";
"Add Printer" = "Add Printer";
-"Add RSS Subscription" = "Add RSS Subscription";
"Address" = "Address";
"Administration" = "Administration";
"Always" = "Always";
"AppSocket/HP JetDirect" = "AppSocket/HP JetDirect";
"Applicator" = "Applicator";
"Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d.";
+"Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group.";
+"Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type.";
"Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x).";
"B0" = "B0";
"B1" = "B1";
"B7" = "B7";
"B8" = "B8";
"B9" = "B9";
-"Bad 'document-format' value \"%s\"." = "Bad 'document-format' value \"%s\".";
+"Bad \"printer-id\" value %d." = "Bad “printer-id” value %d.";
+"Bad '%s' value." = "Bad ‘%s’ value.";
+"Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”.";
+"Bad CloseUI/JCLCloseUI" = "Bad CloseUI/JCLCloseUI";
"Bad NULL dests pointer" = "Bad NULL dests pointer";
"Bad OpenGroup" = "Bad OpenGroup";
"Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI";
"Bad OrderDependency" = "Bad OrderDependency";
"Bad PPD cache file." = "Bad PPD cache file.";
+"Bad PPD file." = "Bad PPD file.";
"Bad Request" = "Bad Request";
"Bad SNMP version number" = "Bad SNMP version number";
"Bad UIConstraints" = "Bad UIConstraints";
+"Bad URI." = "Bad URI.";
+"Bad arguments to function" = "Bad arguments to function";
"Bad copies value %d." = "Bad copies value %d.";
"Bad custom parameter" = "Bad custom parameter";
-"Bad device-uri \"%s\"." = "Bad device-uri \"%s\".";
-"Bad device-uri scheme \"%s\"." = "Bad device-uri scheme \"%s\".";
-"Bad document-format \"%s\"." = "Bad document-format \"%s\".";
-"Bad document-format-default \"%s\"." = "Bad document-format-default \"%s\".";
+"Bad device-uri \"%s\"." = "Bad device-uri “%s”.";
+"Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”.";
+"Bad document-format \"%s\"." = "Bad document-format “%s”.";
+"Bad document-format-default \"%s\"." = "Bad document-format-default “%s”.";
"Bad filename buffer" = "Bad filename buffer";
+"Bad hostname/address in URI" = "Bad hostname/address in URI";
"Bad job-name value: %s" = "Bad job-name value: %s";
"Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count.";
"Bad job-priority value." = "Bad job-priority value.";
-"Bad job-sheets value \"%s\"." = "Bad job-sheets value \"%s\".";
+"Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”.";
"Bad job-sheets value type." = "Bad job-sheets value type.";
"Bad job-state value." = "Bad job-state value.";
-"Bad job-uri \"%s\"." = "Bad job-uri \"%s\".";
-"Bad notify-pull-method \"%s\"." = "Bad notify-pull-method \"%s\".";
-"Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri \"%s\".";
+"Bad job-uri \"%s\"." = "Bad job-uri “%s”.";
+"Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”.";
+"Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”.";
+"Bad notify-user-data \"%s\"." = "Bad notify-user-data “%s”.";
"Bad number-up value %d." = "Bad number-up value %d.";
-"Bad option + choice on line %d." = "Bad option + choice on line %d.";
"Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d.";
-"Bad port-monitor \"%s\"." = "Bad port-monitor \"%s\".";
-"Bad printer URI." = "Bad printer URI.";
+"Bad port number in URI" = "Bad port number in URI";
+"Bad port-monitor \"%s\"." = "Bad port-monitor “%s”.";
"Bad printer-state value %d." = "Bad printer-state value %d.";
+"Bad printer-uri." = "Bad printer-uri.";
"Bad request ID %d." = "Bad request ID %d.";
"Bad request version number %d.%d." = "Bad request version number %d.%d.";
-"Bad subscription ID" = "Bad subscription ID";
+"Bad resource in URI" = "Bad resource in URI";
+"Bad scheme in URI" = "Bad scheme in URI";
+"Bad username in URI" = "Bad username in URI";
"Bad value string" = "Bad value string";
+"Bad/empty URI" = "Bad/empty URI";
"Banners" = "Banners";
"Bond Paper" = "Bond Paper";
-"Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option \"%s\".";
+"Booklet" = "Booklet";
+"Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”.";
"Buffer overflow detected, aborting." = "Buffer overflow detected, aborting.";
"CMYK" = "CMYK";
"CPCL Label Printer" = "CPCL Label Printer";
-"Cancel RSS Subscription" = "Cancel RSS Subscription";
+"Cancel Jobs" = "Cancel Jobs";
"Canceling print job." = "Canceling print job.";
+"Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues.";
"Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer.";
"Cassette" = "Cassette";
"Change Settings" = "Change Settings";
-"Character set \"%s\" not supported." = "Character set \"%s\" not supported.";
+"Character set \"%s\" not supported." = "Character set “%s” not supported.";
"Classes" = "Classes";
"Clean Print Heads" = "Clean Print Heads";
-"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn't support the job-uri attribute.";
+"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute.";
"Color" = "Color";
"Color Mode" = "Color Mode";
"Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?";
"Control file sent successfully." = "Control file sent successfully.";
"Copying print data." = "Copying print data.";
"Created" = "Created";
+"Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate.";
+"Credentials have expired." = "Credentials have expired.";
"Custom" = "Custom";
"CustominCutInterval" = "CustominCutInterval";
"CustominTearInterval" = "CustominTearInterval";
"Dark" = "Dark";
"Darkness" = "Darkness";
"Data file sent successfully." = "Data file sent successfully.";
+"Deep Color" = "Deep Color";
+"Deep Gray" = "Deep Gray";
"Delete Class" = "Delete Class";
"Delete Printer" = "Delete Printer";
"DeskJet Series" = "DeskJet Series";
-"Destination \"%s\" is not accepting jobs." = "Destination \"%s\" is not accepting jobs.";
+"Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs.";
+"Device CMYK" = "Device CMYK";
+"Device Gray" = "Device Gray";
+"Device RGB" = "Device RGB";
"Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s";
"Direct Thermal Media" = "Direct Thermal Media";
-"Directory \"%s\" contains a relative path." = "Directory \"%s\" contains a relative path.";
-"Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d).";
-"Directory \"%s\" is a file." = "Directory \"%s\" is a file.";
-"Directory \"%s\" not available: %s" = "Directory \"%s\" not available: %s";
-"Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d).";
+"Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path.";
+"Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
+"Directory \"%s\" is a file." = "Directory “%s” is a file.";
+"Directory \"%s\" not available: %s" = "Directory “%s” not available: %s";
+"Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d).";
"Disabled" = "Disabled";
"Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d.";
+"Draft" = "Draft";
"Duplexer" = "Duplexer";
"Dymo" = "Dymo";
"EPL1 Label Printer" = "EPL1 Label Printer";
"EPL2 Label Printer" = "EPL2 Label Printer";
"Edit Configuration File" = "Edit Configuration File";
-"Empty PPD file." = "Empty PPD file.";
+"Encryption is not supported." = "Encryption is not supported.";
// TRANSLATORS: Banner/cover sheet after the print job.
"Ending Banner" = "Ending Banner";
"English" = "English";
-"Enter old password:" = "Enter old password:";
-"Enter password again:" = "Enter password again:";
-"Enter password:" = "Enter password:";
"Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.";
-"Envelope #10 " = "Envelope #10 ";
+"Envelope #10" = "Envelope #10";
"Envelope #11" = "Envelope #11";
"Envelope #12" = "Envelope #12";
"Envelope #14" = "Envelope #14";
"Envelope Kaku3" = "Envelope Kaku3";
"Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge";
"Envelope Monarch" = "Envelope Monarch";
-"Envelope PRC1 " = "Envelope PRC1 ";
+"Envelope PRC1" = "Envelope PRC1";
"Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge";
"Envelope PRC10" = "Envelope PRC10";
"Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge";
"Environment Variables:" = "Environment Variables:";
"Epson" = "Epson";
"Error Policy" = "Error Policy";
+"Error reading raster data." = "Error reading raster data.";
"Error sending raster data." = "Error sending raster data.";
-"Error: need hostname after \"-h\" option." = "Error: need hostname after \"-h\" option.";
+"Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option.";
+"European Fanfold" = "European Fanfold";
+"European Fanfold Legal" = "European Fanfold Legal";
"Every 10 Labels" = "Every 10 Labels";
"Every 2 Labels" = "Every 2 Labels";
"Every 3 Labels" = "Every 3 Labels";
"Every Label" = "Every Label";
"Executive" = "Executive";
"Expectation Failed" = "Expectation Failed";
-"Export Printers to Samba" = "Export Printers to Samba";
"Expressions:" = "Expressions:";
-"FAIL" = "FAIL";
-"FanFold German" = "FanFold German";
-"FanFold Legal German" = "FanFold Legal German";
-"Fanfold US" = "Fanfold US";
-"File \"%s\" contains a relative path." = "File \"%s\" contains a relative path.";
-"File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d).";
-"File \"%s\" is a directory." = "File \"%s\" is a directory.";
-"File \"%s\" not available: %s" = "File \"%s\" not available: %s";
-"File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File \"%s\" permissions OK (0%o/uid=%d/gid=%d).";
-"File Folder " = "File Folder ";
-"File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\".";
+"Fast Grayscale" = "Fast Grayscale";
+"File \"%s\" contains a relative path." = "File “%s” contains a relative path.";
+"File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
+"File \"%s\" is a directory." = "File “%s” is a directory.";
+"File \"%s\" not available: %s" = "File “%s” not available: %s";
+"File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d).";
+"File Folder" = "File Folder";
+"File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”.";
"Finished page %d." = "Finished page %d.";
+"Finishing Preset" = "Finishing Preset";
+"Fold" = "Fold";
"Folio" = "Folio";
"Forbidden" = "Forbidden";
+"Found" = "Found";
"General" = "General";
"Generic" = "Generic";
"Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length";
"Grayscale" = "Grayscale";
"HP" = "HP";
"Hanging Folder" = "Hanging Folder";
+"Hash buffer too small." = "Hash buffer too small.";
"Help file not in index." = "Help file not in index.";
+"High" = "High";
"IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags.";
"IPP attribute has no name." = "IPP attribute has no name.";
"IPP attribute is not a member of the message." = "IPP attribute is not a member of the message.";
"IPP string length overflows value." = "IPP string length overflows value.";
"IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes.";
"IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes.";
+"IPPFIND_SERVICE_DOMAIN Domain name" = "IPPFIND_SERVICE_DOMAIN Domain name";
+"IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name";
+"IPPFIND_SERVICE_NAME Service instance name" = "IPPFIND_SERVICE_NAME Service instance name";
+"IPPFIND_SERVICE_PORT Port number" = "IPPFIND_SERVICE_PORT Port number";
+"IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = "IPPFIND_SERVICE_REGTYPE DNS-SD registration type";
+"IPPFIND_SERVICE_SCHEME URI scheme" = "IPPFIND_SERVICE_SCHEME URI scheme";
+"IPPFIND_SERVICE_URI URI" = "IPPFIND_SERVICE_URI URI";
+"IPPFIND_TXT_* Value of TXT record key" = "IPPFIND_TXT_* Value of TXT record key";
"ISOLatin1" = "ISOLatin1";
"Illegal control character" = "Illegal control character";
"Illegal main keyword string" = "Illegal main keyword string";
"Internet Postage 2-Part" = "Internet Postage 2-Part";
"Internet Postage 3-Part" = "Internet Postage 3-Part";
"Internet Printing Protocol" = "Internet Printing Protocol";
+"Invalid group tag." = "Invalid group tag.";
"Invalid media name arguments." = "Invalid media name arguments.";
"Invalid media size." = "Invalid media size.";
-"Invalid printer command \"%s\"." = "Invalid printer command \"%s\".";
+"Invalid named IPP attribute in collection." = "Invalid named IPP attribute in collection.";
+"Invalid ppd-name value." = "Invalid ppd-name value.";
+"Invalid printer command \"%s\"." = "Invalid printer command “%s”.";
"JCL" = "JCL";
"JIS B0" = "JIS B0";
"JIS B1" = "JIS B1";
"JIS B9" = "JIS B9";
"Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files.";
"Job #%d does not exist." = "Job #%d does not exist.";
-"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can't cancel.";
-"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can't cancel.";
-"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can't cancel.";
+"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel.";
+"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel.";
+"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel.";
"Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered.";
"Job #%d is not complete." = "Job #%d is not complete.";
"Job #%d is not held for authentication." = "Job #%d is not held for authentication.";
"Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed.";
"Jobs" = "Jobs";
"LPD/LPR Host or Printer" = "LPD/LPR Host or Printer";
+"LPDEST environment variable names default destination that does not exist." = "LPDEST environment variable names default destination that does not exist.";
"Label Printer" = "Label Printer";
"Label Top" = "Label Top";
-"Language \"%s\" not supported." = "Language \"%s\" not supported.";
+"Language \"%s\" not supported." = "Language “%s” not supported.";
"Large Address" = "Large Address";
"LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5";
"Letter Oversize" = "Letter Oversize";
"Light" = "Light";
"Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)";
"List Available Printers" = "List Available Printers";
+"Listening on port %d." = "Listening on port %d.";
+"Local printer created." = "Local printer created.";
"Long-Edge (Portrait)" = "Long-Edge (Portrait)";
"Looking for printer." = "Looking for printer.";
"Manual Feed" = "Manual Feed";
"Medium" = "Medium";
"Memory allocation error" = "Memory allocation error";
"Missing CloseGroup" = "Missing CloseGroup";
+"Missing CloseUI/JCLCloseUI" = "Missing CloseUI/JCLCloseUI";
"Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header";
"Missing asterisk in column 1" = "Missing asterisk in column 1";
"Missing document-number attribute." = "Missing document-number attribute.";
-"Missing double quote on line %d." = "Missing double quote on line %d.";
"Missing form variable" = "Missing form variable";
"Missing last-document attribute in request." = "Missing last-document attribute in request.";
"Missing media or media-col." = "Missing media or media-col.";
"Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute.";
"Missing option keyword" = "Missing option keyword";
"Missing requesting-user-name attribute." = "Missing requesting-user-name attribute.";
+"Missing required attribute \"%s\"." = "Missing required attribute “%s”.";
"Missing required attributes." = "Missing required attributes.";
-"Missing value on line %d." = "Missing value on line %d.";
+"Missing resource in URI" = "Missing resource in URI";
+"Missing scheme in URI" = "Missing scheme in URI";
"Missing value string" = "Missing value string";
"Missing x-dimension in media-size." = "Missing x-dimension in media-size.";
"Missing y-dimension in media-size." = "Missing y-dimension in media-size.";
"Name OID uses indefinite length" = "Name OID uses indefinite length";
"Nested classes are not allowed." = "Nested classes are not allowed.";
"Never" = "Never";
-"New Stylus Color Series" = "New Stylus Color Series";
-"New Stylus Photo Series" = "New Stylus Photo Series";
+"New credentials are not valid for name." = "New credentials are not valid for name.";
+"New credentials are older than stored credentials." = "New credentials are older than stored credentials.";
"No" = "No";
"No Content" = "No Content";
+"No IPP attributes." = "No IPP attributes.";
"No PPD name" = "No PPD name";
"No VarBind SEQUENCE" = "No VarBind SEQUENCE";
-"No Windows printer drivers are installed." = "No Windows printer drivers are installed.";
"No active connection" = "No active connection";
+"No active connection." = "No active connection.";
"No active jobs on %s." = "No active jobs on %s.";
"No attributes in request." = "No attributes in request.";
"No authentication information provided." = "No authentication information provided.";
+"No common name specified." = "No common name specified.";
"No community name" = "No community name";
+"No default destination." = "No default destination.";
"No default printer." = "No default printer.";
"No destinations added." = "No destinations added.";
"No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable.";
"No printer-uri found" = "No printer-uri found";
"No printer-uri found for class" = "No printer-uri found for class";
"No printer-uri in request." = "No printer-uri in request.";
+"No request URI." = "No request URI.";
+"No request protocol version." = "No request protocol version.";
+"No request sent." = "No request sent.";
"No request-id" = "No request-id";
+"No stored credentials, not valid for name." = "No stored credentials, not valid for name.";
"No subscription attributes in request." = "No subscription attributes in request.";
"No subscriptions found." = "No subscriptions found.";
"No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE";
"No version number" = "No version number";
"Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)";
"Non-continuous (Web sensing)" = "Non-continuous (Web sensing)";
+"None" = "None";
"Normal" = "Normal";
"Not Found" = "Not Found";
"Not Implemented" = "Not Implemented";
"Not Supported" = "Not Supported";
"Not allowed to print." = "Not allowed to print.";
"Note" = "Note";
-"Note: this program only validates the DSC comments, not the PostScript itself." = "Note: this program only validates the DSC comments, not the PostScript itself.";
"OK" = "OK";
"Off (1-Sided)" = "Off (1-Sided)";
"Oki" = "Oki";
"Online Help" = "Online Help";
+"Only local users can create a local printer." = "Only local users can create a local printer.";
"Open of %s failed: %s" = "Open of %s failed: %s";
"OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first";
"OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first";
"Operation Policy" = "Operation Policy";
-"Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option \"%s\" cannot be included via %%%%IncludeFeature.";
+"Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature.";
"Options Installed" = "Options Installed";
"Options:" = "Options:";
+"Other Media" = "Other Media";
+"Other Tray" = "Other Tray";
"Out of date PPD cache file." = "Out of date PPD cache file.";
"Out of memory." = "Out of memory.";
"Output Mode" = "Output Mode";
-"Output for printer %s is sent to %s" = "Output for printer %s is sent to %s";
-"Output for printer %s is sent to remote printer %s on %s" = "Output for printer %s is sent to remote printer %s on %s";
-"Output for printer %s/%s is sent to %s" = "Output for printer %s/%s is sent to %s";
-"Output for printer %s/%s is sent to remote printer %s on %s" = "Output for printer %s/%s is sent to remote printer %s on %s";
-"PASS" = "PASS";
"PCL Laser Printer" = "PCL Laser Printer";
"PRC16K" = "PRC16K";
"PRC16K Long Edge" = "PRC16K Long Edge";
"PRC32K Long Edge" = "PRC32K Long Edge";
"PRC32K Oversize" = "PRC32K Oversize";
"PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge";
+"PRINTER environment variable names default destination that does not exist." = "PRINTER environment variable names default destination that does not exist.";
"Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU";
"Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE";
"ParamCustominCutInterval" = "ParamCustominCutInterval";
"ParamCustominTearInterval" = "ParamCustominTearInterval";
"Password for %s on %s? " = "Password for %s on %s? ";
-"Password for %s required to access %s via SAMBA: " = "Password for %s required to access %s via SAMBA: ";
"Pause Class" = "Pause Class";
"Pause Printer" = "Pause Printer";
"Peel-Off" = "Peel-Off";
"Port Monitor" = "Port Monitor";
"PostScript Printer" = "PostScript Printer";
"Postcard" = "Postcard";
-"Postcard Double " = "Postcard Double ";
+"Postcard Double" = "Postcard Double";
"Postcard Double Long Edge" = "Postcard Double Long Edge";
"Postcard Long Edge" = "Postcard Long Edge";
"Preparing to print." = "Preparing to print.";
"Print Density" = "Print Density";
"Print Job:" = "Print Job:";
"Print Mode" = "Print Mode";
+"Print Quality" = "Print Quality";
"Print Rate" = "Print Rate";
"Print Self-Test Page" = "Print Self-Test Page";
"Print Speed" = "Print Speed";
"Print job canceled at printer." = "Print job canceled at printer.";
"Print job too large." = "Print job too large.";
"Print job was not accepted." = "Print job was not accepted.";
+"Printer \"%s\" already exists." = "Printer “%s” already exists.";
"Printer Added" = "Printer Added";
"Printer Default" = "Printer Default";
"Printer Deleted" = "Printer Deleted";
"Printer Settings" = "Printer Settings";
"Printer cannot print supplied content." = "Printer cannot print supplied content.";
"Printer cannot print with supplied options." = "Printer cannot print with supplied options.";
+"Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats.";
"Printer:" = "Printer:";
"Printers" = "Printers";
-"Printing page %d, %d%% complete." = "Printing page %d, %d%% complete.";
-"Purge Jobs" = "Purge Jobs";
+"Printing page %d, %u%% complete." = "Printing page %d, %u%% complete.";
+"Punch" = "Punch";
"Quarto" = "Quarto";
"Quota limit reached." = "Quota limit reached.";
"Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size";
-// TRANSLATORS: Pri is job priority.
-"Rank Owner Pri Job Files Total Size" = "Rank Owner Pri Job Files Total Size";
"Reject Jobs" = "Reject Jobs";
"Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d).";
"Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d).";
"Resume Printer" = "Resume Printer";
"Return Address" = "Return Address";
"Rewind" = "Rewind";
-"Running command: %s %s -N -A %s -c '%s'" = "Running command: %s %s -N -A %s -c '%s'";
"SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length";
"SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error";
"See Other" = "See Other";
+"See remote printer." = "See remote printer.";
+"Self-signed credentials are blocked." = "Self-signed credentials are blocked.";
"Sending data to printer." = "Sending data to printer.";
"Server Restarted" = "Server Restarted";
"Server Security Auditing" = "Server Security Auditing";
"Server Started" = "Server Started";
"Server Stopped" = "Server Stopped";
+"Server credentials not set." = "Server credentials not set.";
"Service Unavailable" = "Service Unavailable";
"Set Allowed Users" = "Set Allowed Users";
"Set As Server Default" = "Set As Server Default";
"Special Paper" = "Special Paper";
"Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete.";
"Standard" = "Standard";
+"Staple" = "Staple";
// TRANSLATORS: Banner/cover sheet before the print job.
"Starting Banner" = "Starting Banner";
"Starting page %d." = "Starting page %d.";
"Statement" = "Statement";
-"Stylus Color Series" = "Stylus Color Series";
-"Stylus Photo Series" = "Stylus Photo Series";
"Subscription #%d does not exist." = "Subscription #%d does not exist.";
"Substitutions:" = "Substitutions:";
"Super A" = "Super A";
"Tear" = "Tear";
"Tear-Off" = "Tear-Off";
"Tear-Off Adjust Position" = "Tear-Off Adjust Position";
-"The \"%s\" attribute is required for print jobs." = "The \"%s\" attribute is required for print jobs.";
+"The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs.";
"The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids.";
-"The '%s' Job Description attribute cannot be supplied in a job creation request." = "The '%s' Job Description attribute cannot be supplied in a job creation request.";
-"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The '%s' operation attribute cannot be supplied in a Create-Job request.";
-"The PPD file \"%s\" could not be found." = "The PPD file \"%s\" could not be found.";
-"The PPD file \"%s\" could not be opened: %s" = "The PPD file \"%s\" could not be opened: %s";
+"The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request.";
+"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request.";
+"The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found.";
+"The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s";
"The PPD file could not be opened." = "The PPD file could not be opened.";
"The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
-"The developer unit needs to be replaced." = "The developer unit needs to be replaced.";
-"The developer unit will need to be replaced soon." = "The developer unit will need to be replaced soon.";
-"The fuser's temperature is high." = "The fuser's temperature is high.";
-"The fuser's temperature is low." = "The fuser's temperature is low.";
"The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions.";
"The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets).";
-"The optical photoconductor needs to be replaced." = "The optical photoconductor needs to be replaced.";
-"The optical photoconductor will need to be replaced soon." = "The optical photoconductor will need to be replaced soon.";
-"The output bin is almost full." = "The output bin is almost full.";
-"The output bin is full." = "The output bin is full.";
-"The output bin is missing." = "The output bin is missing.";
-"The paper tray is almost empty." = "The paper tray is almost empty.";
-"The paper tray is empty." = "The paper tray is empty.";
-"The paper tray is missing." = "The paper tray is missing.";
-"The paper tray needs to be filled." = "The paper tray needs to be filled.";
"The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists.";
"The printer did not respond." = "The printer did not respond.";
"The printer is in use." = "The printer is in use.";
"The printer is now connected." = "The printer is now connected.";
"The printer is now online." = "The printer is now online.";
"The printer is offline." = "The printer is offline.";
-"The printer is running low on ink." = "The printer is running low on ink.";
-"The printer is running low on toner." = "The printer is running low on toner.";
"The printer is unreachable at this time." = "The printer is unreachable at this time.";
-"The printer may be out of ink." = "The printer may be out of ink.";
-"The printer may be out of toner." = "The printer may be out of toner.";
"The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time.";
-"The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
+"The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (' \"), question mark (?), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (’ ″), question mark (?), or the pound sign (#).";
"The printer or class does not exist." = "The printer or class does not exist.";
"The printer or class is not shared." = "The printer or class is not shared.";
-"The printer's cover is open." = "The printer's cover is open.";
-"The printer's door is open." = "The printer's door is open.";
-"The printer's interlock is open." = "The printer's interlock is open.";
-"The printer's waste bin is almost full." = "The printer's waste bin is almost full.";
-"The printer's waste bin is full." = "The printer's waste bin is full.";
-"The printer-uri \"%s\" contains invalid characters." = "The printer-uri \"%s\" contains invalid characters.";
+"The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters.";
"The printer-uri attribute is required." = "The printer-uri attribute is required.";
-"The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\".";
-"The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\".";
-"The subscription name may not contain spaces, slashes (/), question marks (?), or the pound sign (#)." = "The subscription name may not contain spaces, slashes (/), question marks (?), or the pound sign (#).";
-"The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it.";
-"The which-jobs value \"%s\" is not supported." = "The which-jobs value \"%s\" is not supported.";
+"The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”.";
+"The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”.";
+"The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.";
+"The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported.";
"There are too many subscriptions." = "There are too many subscriptions.";
-"There is a paper jam." = "There is a paper jam.";
"There was an unrecoverable USB error." = "There was an unrecoverable USB error.";
"Thermal Transfer Media" = "Thermal Transfer Media";
"Too many active jobs." = "Too many active jobs.";
"Tray 2" = "Tray 2";
"Tray 3" = "Tray 3";
"Tray 4" = "Tray 4";
+"Trust on first use is disabled." = "Trust on first use is disabled.";
"URI Too Long" = "URI Too Long";
+"URI too large" = "URI too large";
+"US Fanfold" = "US Fanfold";
"US Ledger" = "US Ledger";
"US Legal" = "US Legal";
"US Legal Oversize" = "US Legal Oversize";
"US Letter Small" = "US Letter Small";
"Unable to access cupsd.conf file" = "Unable to access cupsd.conf file";
"Unable to access help file." = "Unable to access help file.";
-"Unable to add RSS subscription" = "Unable to add RSS subscription";
"Unable to add class" = "Unable to add class";
"Unable to add document to print job." = "Unable to add document to print job.";
-"Unable to add job for destination \"%s\"." = "Unable to add job for destination \"%s\".";
+"Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”.";
"Unable to add printer" = "Unable to add printer";
"Unable to allocate memory for file types." = "Unable to allocate memory for file types.";
"Unable to allocate memory for page info" = "Unable to allocate memory for page info";
"Unable to allocate memory for pages array" = "Unable to allocate memory for pages array";
-"Unable to cancel RSS subscription" = "Unable to cancel RSS subscription";
+"Unable to allocate memory for printer" = "Unable to allocate memory for printer";
"Unable to cancel print job." = "Unable to cancel print job.";
"Unable to change printer" = "Unable to change printer";
"Unable to change printer-is-shared attribute" = "Unable to change printer-is-shared attribute";
"Unable to configure printer options." = "Unable to configure printer options.";
"Unable to connect to host." = "Unable to connect to host.";
"Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class.";
-"Unable to copy 64-bit CUPS printer driver files (%d)." = "Unable to copy 64-bit CUPS printer driver files (%d).";
-"Unable to copy 64-bit Windows printer driver files (%d)." = "Unable to copy 64-bit Windows printer driver files (%d).";
-"Unable to copy CUPS printer driver files (%d)." = "Unable to copy CUPS printer driver files (%d).";
"Unable to copy PPD file - %s" = "Unable to copy PPD file - %s";
"Unable to copy PPD file." = "Unable to copy PPD file.";
-"Unable to copy Windows 2000 printer driver files (%d)." = "Unable to copy Windows 2000 printer driver files (%d).";
-"Unable to copy Windows 9x printer driver files (%d)." = "Unable to copy Windows 9x printer driver files (%d).";
-"Unable to copy interface script - %s" = "Unable to copy interface script - %s";
+"Unable to create credentials from array." = "Unable to create credentials from array.";
"Unable to create printer-uri" = "Unable to create printer-uri";
+"Unable to create printer." = "Unable to create printer.";
+"Unable to create server credentials." = "Unable to create server credentials.";
+"Unable to create spool directory \"%s\": %s" = "Unable to create spool directory “%s”: %s";
"Unable to create temporary file" = "Unable to create temporary file";
"Unable to delete class" = "Unable to delete class";
"Unable to delete printer" = "Unable to delete printer";
"Unable to do maintenance command" = "Unable to do maintenance command";
"Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB";
+"Unable to establish a secure connection to host (%d)." = "Unable to establish a secure connection to host (%d).";
"Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid).";
"Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid).";
"Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate).";
"Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate).";
"Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate).";
"Unable to establish a secure connection to host." = "Unable to establish a secure connection to host.";
+"Unable to execute command \"%s\": %s" = "Unable to execute command “%s”: %s";
"Unable to find destination for job" = "Unable to find destination for job";
"Unable to find printer." = "Unable to find printer.";
+"Unable to find server credentials." = "Unable to find server credentials.";
"Unable to get backend exit status." = "Unable to get backend exit status.";
"Unable to get class list" = "Unable to get class list";
"Unable to get class status" = "Unable to get class status";
"Unable to get printer list" = "Unable to get printer list";
"Unable to get printer status" = "Unable to get printer status";
"Unable to get printer status." = "Unable to get printer status.";
-"Unable to install Windows 2000 printer driver files (%d)." = "Unable to install Windows 2000 printer driver files (%d).";
-"Unable to install Windows 9x printer driver files (%d)." = "Unable to install Windows 9x printer driver files (%d).";
"Unable to load help index." = "Unable to load help index.";
-"Unable to locate printer \"%s\"." = "Unable to locate printer \"%s\".";
+"Unable to locate printer \"%s\"." = "Unable to locate printer “%s”.";
"Unable to locate printer." = "Unable to locate printer.";
"Unable to modify class" = "Unable to modify class";
"Unable to modify printer" = "Unable to modify printer";
"Unable to open raster file" = "Unable to open raster file";
"Unable to print test page" = "Unable to print test page";
"Unable to read print data." = "Unable to read print data.";
-"Unable to resolve printer URI." = "Unable to resolve printer URI.";
-"Unable to run \"%s\": %s" = "Unable to run \"%s\": %s";
+"Unable to register \"%s.%s\": %d" = "Unable to register “%s.%s”: %d";
+"Unable to rename job document file." = "Unable to rename job document file.";
+"Unable to resolve printer-uri." = "Unable to resolve printer-uri.";
"Unable to see in file" = "Unable to see in file";
"Unable to send command to printer driver" = "Unable to send command to printer driver";
"Unable to send data to printer." = "Unable to send data to printer.";
-"Unable to set Windows printer driver (%d)." = "Unable to set Windows printer driver (%d).";
"Unable to set options" = "Unable to set options";
"Unable to set server default" = "Unable to set server default";
"Unable to start backend process." = "Unable to start backend process.";
"Unauthorized" = "Unauthorized";
"Units" = "Units";
"Unknown" = "Unknown";
-"Unknown choice \"%s\" for option \"%s\"." = "Unknown choice \"%s\" for option \"%s\".";
-"Unknown encryption option value: \"%s\"." = "Unknown encryption option value: \"%s\".";
-"Unknown file order: \"%s\"." = "Unknown file order: \"%s\".";
-"Unknown format character: \"%c\"." = "Unknown format character: \"%c\".";
+"Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”.";
+"Unknown directive \"%s\" on line %d of \"%s\" ignored." = "Unknown directive “%s” on line %d of “%s” ignored.";
+"Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”.";
+"Unknown file order: \"%s\"." = "Unknown file order: “%s”.";
+"Unknown format character: \"%c\"." = "Unknown format character: “%c”.";
+"Unknown hash algorithm." = "Unknown hash algorithm.";
"Unknown media size name." = "Unknown media size name.";
-"Unknown option \"%s\" with value \"%s\"." = "Unknown option \"%s\" with value \"%s\".";
-"Unknown option \"%s\"." = "Unknown option \"%s\".";
-"Unknown print mode: \"%s\"." = "Unknown print mode: \"%s\".";
-"Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy \"%s\".";
-"Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy \"%s\".";
+"Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”.";
+"Unknown option \"%s\"." = "Unknown option “%s”.";
+"Unknown print mode: \"%s\"." = "Unknown print mode: “%s”.";
+"Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”.";
+"Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”.";
+"Unknown request method." = "Unknown request method.";
+"Unknown request version." = "Unknown request version.";
+"Unknown scheme in URI" = "Unknown scheme in URI";
"Unknown service name." = "Unknown service name.";
-"Unknown version option value: \"%s\"." = "Unknown version option value: \"%s\".";
-"Unsupported 'compression' value \"%s\"." = "Unsupported 'compression' value \"%s\".";
-"Unsupported 'document-format' value \"%s\"." = "Unsupported 'document-format' value \"%s\".";
-"Unsupported 'job-name' value." = "Unsupported 'job-name' value.";
-"Unsupported character set \"%s\"." = "Unsupported character set \"%s\".";
-"Unsupported compression \"%s\"." = "Unsupported compression \"%s\".";
-"Unsupported document-format \"%s\"." = "Unsupported document-format \"%s\".";
-"Unsupported document-format \"%s/%s\"." = "Unsupported document-format \"%s/%s\".";
-"Unsupported format \"%s\"." = "Unsupported format \"%s\".";
+"Unknown version option value: \"%s\"." = "Unknown version option value: “%s”.";
+"Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”.";
+"Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”.";
+"Unsupported 'job-hold-until' value." = "Unsupported ‘job-hold-until’ value.";
+"Unsupported 'job-name' value." = "Unsupported ‘job-name’ value.";
+"Unsupported character set \"%s\"." = "Unsupported character set “%s”.";
+"Unsupported compression \"%s\"." = "Unsupported compression “%s”.";
+"Unsupported document-format \"%s\"." = "Unsupported document-format “%s”.";
+"Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”.";
+"Unsupported format \"%s\"." = "Unsupported format “%s”.";
"Unsupported margins." = "Unsupported margins.";
"Unsupported media value." = "Unsupported media value.";
"Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1.";
"Unsupported raster data." = "Unsupported raster data.";
"Unsupported value type" = "Unsupported value type";
"Upgrade Required" = "Upgrade Required";
-"Usage:\n\n lpadmin [-h server] -d destination\n lpadmin [-h server] -x destination\n lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n [-r remove-class] [-v device] [-D description]\n [-P ppd-file] [-o name=value]\n [-u allow:user,user] [-u deny:user,user]" = "Usage:\n\n lpadmin [-h server] -d destination\n lpadmin [-h server] -x destination\n lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n [-r remove-class] [-v device] [-D description]\n [-P ppd-file] [-o name=value]\n [-u allow:user,user] [-u deny:user,user]";
+"Usage: %s [options] destination(s)" = "Usage: %s [options] destination(s)";
"Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]";
-"Usage: cupsaddsmb [options] printer1 ... printerN" = "Usage: cupsaddsmb [options] printer1 ... printerN";
-"Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value ... paramN=valueN]";
+"Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]" = "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]";
+"Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]";
"Usage: cupsd [options]" = "Usage: cupsd [options]";
-"Usage: cupsfilter [ options ] filename" = "Usage: cupsfilter [ options ] filename";
-"Usage: cupstestdsc [options] filename.ps [... filename.ps]" = "Usage: cupstestdsc [options] filename.ps [... filename.ps]";
-"Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]" = "Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]";
-"Usage: ippdiscover [options] -a\n ippdiscover [options] \"service name\"\n\nOptions:" = "Usage: ippdiscover [options] -a\n ippdiscover [options] \"service name\"\n\nOptions:";
-"Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version";
-"Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ ... filenameN ]";
-"Usage: lpmove job/src dest" = "Usage: lpmove job/src dest";
-"Usage: lpoptions [-h server] [-E] -d printer\n lpoptions [-h server] [-E] [-p printer] -l\n lpoptions [-h server] [-E] -p printer -o option[=value] ...\n lpoptions [-h server] [-E] -x printer" = "Usage: lpoptions [-h server] [-E] -d printer\n lpoptions [-h server] [-E] [-p printer] -l\n lpoptions [-h server] [-E] -p printer -o option[=value] ...\n lpoptions [-h server] [-E] -x printer";
-"Usage: lppasswd [-g groupname]" = "Usage: lppasswd [-g groupname]";
-"Usage: lppasswd [-g groupname] [username]\n lppasswd [-g groupname] -a [username]\n lppasswd [-g groupname] -x [username]" = "Usage: lppasswd [-g groupname] [username]\n lppasswd [-g groupname] -a [username]\n lppasswd [-g groupname] -x [username]";
-"Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]" = "Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]";
-"Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ ... filenameN.drv ]";
+"Usage: cupsfilter [ options ] [ -- ] filename" = "Usage: cupsfilter [ options ] [ -- ] filename";
+"Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]\n program | cupstestppd [options] -" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]\n program | cupstestppd [options] -";
+"Usage: ippeveprinter [options] \"name\"" = "Usage: ippeveprinter [options] “name”";
+"Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n ippfind [options] name[.regtype[.domain.]] … [expression]\n ippfind --help\n ippfind --version";
+"Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]";
+"Usage: lp [options] [--] [file(s)]\n lp [options] -i id" = "Usage: lp [options] [--] [file(s)]\n lp [options] -i id";
+"Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination" = "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination";
+"Usage: lpinfo [options] -m\n lpinfo [options] -v" = "Usage: lpinfo [options] -m\n lpinfo [options] -v";
+"Usage: lpmove [options] job destination\n lpmove [options] source-destination destination" = "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination";
+"Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination" = "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination";
+"Usage: lpq [options] [+interval]" = "Usage: lpq [options] [+interval]";
+"Usage: lpr [options] [file(s)]" = "Usage: lpr [options] [file(s)]";
+"Usage: lprm [options] [id]\n lprm [options] -" = "Usage: lprm [options] [id]\n lprm [options] -";
+"Usage: lpstat [options]" = "Usage: lpstat [options]";
+"Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]";
"Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html";
-"Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]";
-"Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]";
-"Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]";
+"Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]";
+"Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]";
+"Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]";
"Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]";
+"Using spool directory \"%s\"." = "Using spool directory “%s”.";
"Value uses indefinite length" = "Value uses indefinite length";
"VarBind uses indefinite length" = "VarBind uses indefinite length";
"Version uses indefinite length" = "Version uses indefinite length";
"Waiting for job to complete." = "Waiting for job to complete.";
"Waiting for printer to become available." = "Waiting for printer to become available.";
"Waiting for printer to finish." = "Waiting for printer to finish.";
-"Warning, no Windows 2000 printer drivers are installed." = "Warning, no Windows 2000 printer drivers are installed.";
+"Warning: This program will be removed in a future version of CUPS." = "Warning: This program will be removed in a future version of CUPS.";
"Web Interface is Disabled" = "Web Interface is Disabled";
"Yes" = "Yes";
-"You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>." = "You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>.";
-"Your password must be at least 6 characters long, cannot contain your username, and must contain at least one letter and number." = "Your password must be at least 6 characters long, cannot contain your username, and must contain at least one letter and number.";
+"You cannot access this page." = "You cannot access this page.";
+"You must access this page using the URL https://%s:%d%s." = "You must access this page using the URL https://%s:%d%s.";
+"Your account does not have the necessary privileges." = "Your account does not have the necessary privileges.";
"ZPL Label Printer" = "ZPL Label Printer";
"Zebra" = "Zebra";
"aborted" = "aborted";
+// TRANSLATORS: Accuracy Units
+"accuracy-units" = "Accuracy Units";
+// TRANSLATORS: Millimeters
+"accuracy-units.mm" = "Millimeters";
+// TRANSLATORS: Nanometers
+"accuracy-units.nm" = "Nanometers";
+// TRANSLATORS: Micrometers
+"accuracy-units.um" = "Micrometers";
+// TRANSLATORS: Bale Output
+"baling" = "Bale Output";
+// TRANSLATORS: Bale Using
+"baling-type" = "Bale Using";
+// TRANSLATORS: Band
+"baling-type.band" = "Band";
+// TRANSLATORS: Shrink Wrap
+"baling-type.shrink-wrap" = "Shrink Wrap";
+// TRANSLATORS: Wrap
+"baling-type.wrap" = "Wrap";
+// TRANSLATORS: Bale After
+"baling-when" = "Bale After";
+// TRANSLATORS: Job
+"baling-when.after-job" = "Job";
+// TRANSLATORS: Sets
+"baling-when.after-sets" = "Sets";
+// TRANSLATORS: Bind Output
+"binding" = "Bind Output";
+// TRANSLATORS: Bind Edge
+"binding-reference-edge" = "Bind Edge";
+// TRANSLATORS: Bottom
+"binding-reference-edge.bottom" = "Bottom";
+// TRANSLATORS: Left
+"binding-reference-edge.left" = "Left";
+// TRANSLATORS: Right
+"binding-reference-edge.right" = "Right";
+// TRANSLATORS: Top
+"binding-reference-edge.top" = "Top";
+// TRANSLATORS: Binder Type
+"binding-type" = "Binder Type";
+// TRANSLATORS: Adhesive
+"binding-type.adhesive" = "Adhesive";
+// TRANSLATORS: Comb
+"binding-type.comb" = "Comb";
+// TRANSLATORS: Flat
+"binding-type.flat" = "Flat";
+// TRANSLATORS: Padding
+"binding-type.padding" = "Padding";
+// TRANSLATORS: Perfect
+"binding-type.perfect" = "Perfect";
+// TRANSLATORS: Spiral
+"binding-type.spiral" = "Spiral";
+// TRANSLATORS: Tape
+"binding-type.tape" = "Tape";
+// TRANSLATORS: Velo
+"binding-type.velo" = "Velo";
"canceled" = "canceled";
+// TRANSLATORS: Chamber Humidity
+"chamber-humidity" = "Chamber Humidity";
+// TRANSLATORS: Chamber Temperature
+"chamber-temperature" = "Chamber Temperature";
+// TRANSLATORS: Print Job Cost
+"charge-info-message" = "Print Job Cost";
+// TRANSLATORS: Coat Sheets
+"coating" = "Coat Sheets";
+// TRANSLATORS: Add Coating To
+"coating-sides" = "Add Coating To";
+// TRANSLATORS: Back
+"coating-sides.back" = "Back";
+// TRANSLATORS: Front and Back
+"coating-sides.both" = "Front and Back";
+// TRANSLATORS: Front
+"coating-sides.front" = "Front";
+// TRANSLATORS: Type of Coating
+"coating-type" = "Type of Coating";
+// TRANSLATORS: Archival
+"coating-type.archival" = "Archival";
+// TRANSLATORS: Archival Glossy
+"coating-type.archival-glossy" = "Archival Glossy";
+// TRANSLATORS: Archival Matte
+"coating-type.archival-matte" = "Archival Matte";
+// TRANSLATORS: Archival Semi Gloss
+"coating-type.archival-semi-gloss" = "Archival Semi Gloss";
+// TRANSLATORS: Glossy
+"coating-type.glossy" = "Glossy";
+// TRANSLATORS: High Gloss
+"coating-type.high-gloss" = "High Gloss";
+// TRANSLATORS: Matte
+"coating-type.matte" = "Matte";
+// TRANSLATORS: Semi-gloss
+"coating-type.semi-gloss" = "Semi-gloss";
+// TRANSLATORS: Silicone
+"coating-type.silicone" = "Silicone";
+// TRANSLATORS: Translucent
+"coating-type.translucent" = "Translucent";
"completed" = "completed";
+// TRANSLATORS: Print Confirmation Sheet
+"confirmation-sheet-print" = "Print Confirmation Sheet";
+// TRANSLATORS: Copies
+"copies" = "Copies";
+// TRANSLATORS: Back Cover
+"cover-back" = "Back Cover";
+// TRANSLATORS: Front Cover
+"cover-front" = "Front Cover";
+// TRANSLATORS: Cover Sheet Info
+"cover-sheet-info" = "Cover Sheet Info";
+// TRANSLATORS: Date Time
+"cover-sheet-info-supported.date-time" = "Date Time";
+// TRANSLATORS: From Name
+"cover-sheet-info-supported.from-name" = "From Name";
+// TRANSLATORS: Logo
+"cover-sheet-info-supported.logo" = "Logo";
+// TRANSLATORS: Message
+"cover-sheet-info-supported.message" = "Message";
+// TRANSLATORS: Organization
+"cover-sheet-info-supported.organization" = "Organization";
+// TRANSLATORS: Subject
+"cover-sheet-info-supported.subject" = "Subject";
+// TRANSLATORS: To Name
+"cover-sheet-info-supported.to-name" = "To Name";
+// TRANSLATORS: Printed Cover
+"cover-type" = "Printed Cover";
+// TRANSLATORS: No Cover
+"cover-type.no-cover" = "No Cover";
+// TRANSLATORS: Back Only
+"cover-type.print-back" = "Back Only";
+// TRANSLATORS: Front and Back
+"cover-type.print-both" = "Front and Back";
+// TRANSLATORS: Front Only
+"cover-type.print-front" = "Front Only";
+// TRANSLATORS: None
+"cover-type.print-none" = "None";
+// TRANSLATORS: Cover Output
+"covering" = "Cover Output";
+// TRANSLATORS: Add Cover
+"covering-name" = "Add Cover";
+// TRANSLATORS: Plain
+"covering-name.plain" = "Plain";
+// TRANSLATORS: Pre-cut
+"covering-name.pre-cut" = "Pre-cut";
+// TRANSLATORS: Pre-printed
+"covering-name.pre-printed" = "Pre-printed";
"cups-deviced failed to execute." = "cups-deviced failed to execute.";
"cups-driverd failed to execute." = "cups-driverd failed to execute.";
-"cupsaddsmb: No PPD file for printer \"%s\" - %s" = "cupsaddsmb: No PPD file for printer \"%s\" - %s";
-"cupsctl: Cannot set Listen or Port directly." = "cupsctl: Cannot set Listen or Port directly.";
+"cupsctl: Cannot set %s directly." = "cupsctl: Cannot set %s directly.";
"cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s";
-"cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option \"%s\"";
-"cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option \"-%c\"";
-"cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after \"-c\" option.";
-"cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after \"-s\" option.";
+"cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”";
+"cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”";
+"cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option.";
+"cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option.";
+"cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode.";
"cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed.";
"cupsd: Unable to get current directory." = "cupsd: Unable to get current directory.";
"cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file.";
-"cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument \"%s\" - aborting.";
-"cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option \"%c\" - aborting.";
-"cupsd: launchd(8) support not compiled in, running in normal mode." = "cupsd: launchd(8) support not compiled in, running in normal mode.";
+"cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting.";
+"cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting.";
"cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d.";
"cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d.";
"cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified.";
"cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s";
"cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option.";
"cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option.";
+// TRANSLATORS: Detailed Status Message
+"detailed-status-message" = "Detailed Status Message";
"device for %s/%s: %s" = "device for %s/%s: %s";
"device for %s: %s" = "device for %s: %s";
+// TRANSLATORS: Copies
+"document-copies" = "Copies";
+// TRANSLATORS: Document Privacy Attributes
+"document-privacy-attributes" = "Document Privacy Attributes";
+// TRANSLATORS: All
+"document-privacy-attributes.all" = "All";
+// TRANSLATORS: Default
+"document-privacy-attributes.default" = "Default";
+// TRANSLATORS: Document Description
+"document-privacy-attributes.document-description" = "Document Description";
+// TRANSLATORS: Document Template
+"document-privacy-attributes.document-template" = "Document Template";
+// TRANSLATORS: None
+"document-privacy-attributes.none" = "None";
+// TRANSLATORS: Document Privacy Scope
+"document-privacy-scope" = "Document Privacy Scope";
+// TRANSLATORS: All
+"document-privacy-scope.all" = "All";
+// TRANSLATORS: Default
+"document-privacy-scope.default" = "Default";
+// TRANSLATORS: None
+"document-privacy-scope.none" = "None";
+// TRANSLATORS: Owner
+"document-privacy-scope.owner" = "Owner";
+// TRANSLATORS: Document State
+"document-state" = "Document State";
+// TRANSLATORS: Detailed Document State
+"document-state-reasons" = "Detailed Document State";
+// TRANSLATORS: Aborted By System
+"document-state-reasons.aborted-by-system" = "Aborted By System";
+// TRANSLATORS: Canceled At Device
+"document-state-reasons.canceled-at-device" = "Canceled At Device";
+// TRANSLATORS: Canceled By Operator
+"document-state-reasons.canceled-by-operator" = "Canceled By Operator";
+// TRANSLATORS: Canceled By User
+"document-state-reasons.canceled-by-user" = "Canceled By User";
+// TRANSLATORS: Completed Successfully
+"document-state-reasons.completed-successfully" = "Completed Successfully";
+// TRANSLATORS: Completed With Errors
+"document-state-reasons.completed-with-errors" = "Completed With Errors";
+// TRANSLATORS: Completed With Warnings
+"document-state-reasons.completed-with-warnings" = "Completed With Warnings";
+// TRANSLATORS: Compression Error
+"document-state-reasons.compression-error" = "Compression Error";
+// TRANSLATORS: Data Insufficient
+"document-state-reasons.data-insufficient" = "Data Insufficient";
+// TRANSLATORS: Digital Signature Did Not Verify
+"document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
+// TRANSLATORS: Digital Signature Type Not Supported
+"document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
+// TRANSLATORS: Digital Signature Wait
+"document-state-reasons.digital-signature-wait" = "Digital Signature Wait";
+// TRANSLATORS: Document Access Error
+"document-state-reasons.document-access-error" = "Document Access Error";
+// TRANSLATORS: Document Fetchable
+"document-state-reasons.document-fetchable" = "Document Fetchable";
+// TRANSLATORS: Document Format Error
+"document-state-reasons.document-format-error" = "Document Format Error";
+// TRANSLATORS: Document Password Error
+"document-state-reasons.document-password-error" = "Document Password Error";
+// TRANSLATORS: Document Permission Error
+"document-state-reasons.document-permission-error" = "Document Permission Error";
+// TRANSLATORS: Document Security Error
+"document-state-reasons.document-security-error" = "Document Security Error";
+// TRANSLATORS: Document Unprintable Error
+"document-state-reasons.document-unprintable-error" = "Document Unprintable Error";
+// TRANSLATORS: Errors Detected
+"document-state-reasons.errors-detected" = "Errors Detected";
+// TRANSLATORS: Incoming
+"document-state-reasons.incoming" = "Incoming";
+// TRANSLATORS: Interpreting
+"document-state-reasons.interpreting" = "Interpreting";
+// TRANSLATORS: None
+"document-state-reasons.none" = "None";
+// TRANSLATORS: Outgoing
+"document-state-reasons.outgoing" = "Outgoing";
+// TRANSLATORS: Printing
+"document-state-reasons.printing" = "Printing";
+// TRANSLATORS: Processing To Stop Point
+"document-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
+// TRANSLATORS: Queued
+"document-state-reasons.queued" = "Queued";
+// TRANSLATORS: Queued For Marker
+"document-state-reasons.queued-for-marker" = "Queued For Marker";
+// TRANSLATORS: Queued In Device
+"document-state-reasons.queued-in-device" = "Queued In Device";
+// TRANSLATORS: Resources Are Not Ready
+"document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
+// TRANSLATORS: Resources Are Not Supported
+"document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
+// TRANSLATORS: Submission Interrupted
+"document-state-reasons.submission-interrupted" = "Submission Interrupted";
+// TRANSLATORS: Transforming
+"document-state-reasons.transforming" = "Transforming";
+// TRANSLATORS: Unsupported Compression
+"document-state-reasons.unsupported-compression" = "Unsupported Compression";
+// TRANSLATORS: Unsupported Document Format
+"document-state-reasons.unsupported-document-format" = "Unsupported Document Format";
+// TRANSLATORS: Warnings Detected
+"document-state-reasons.warnings-detected" = "Warnings Detected";
+// TRANSLATORS: Pending
+"document-state.3" = "Pending";
+// TRANSLATORS: Processing
+"document-state.5" = "Processing";
+// TRANSLATORS: Stopped
+"document-state.6" = "Stopped";
+// TRANSLATORS: Canceled
+"document-state.7" = "Canceled";
+// TRANSLATORS: Aborted
+"document-state.8" = "Aborted";
+// TRANSLATORS: Completed
+"document-state.9" = "Completed";
"error-index uses indefinite length" = "error-index uses indefinite length";
"error-status uses indefinite length" = "error-status uses indefinite length";
+"expression --and expression\n Logical AND" = "expression --and expression\n Logical AND";
+"expression --or expression\n Logical OR" = "expression --or expression\n Logical OR";
+"expression expression Logical AND" = "expression expression Logical AND";
+// TRANSLATORS: Feed Orientation
+"feed-orientation" = "Feed Orientation";
+// TRANSLATORS: Long Edge First
+"feed-orientation.long-edge-first" = "Long Edge First";
+// TRANSLATORS: Short Edge First
+"feed-orientation.short-edge-first" = "Short Edge First";
+// TRANSLATORS: Fetch Status Code
+"fetch-status-code" = "Fetch Status Code";
+// TRANSLATORS: Finishing Template
+"finishing-template" = "Finishing Template";
+// TRANSLATORS: Bale
+"finishing-template.bale" = "Bale";
+// TRANSLATORS: Bind
+"finishing-template.bind" = "Bind";
+// TRANSLATORS: Bind Bottom
+"finishing-template.bind-bottom" = "Bind Bottom";
+// TRANSLATORS: Bind Left
+"finishing-template.bind-left" = "Bind Left";
+// TRANSLATORS: Bind Right
+"finishing-template.bind-right" = "Bind Right";
+// TRANSLATORS: Bind Top
+"finishing-template.bind-top" = "Bind Top";
+// TRANSLATORS: Booklet Maker
+"finishing-template.booklet-maker" = "Booklet Maker";
+// TRANSLATORS: Coat
+"finishing-template.coat" = "Coat";
+// TRANSLATORS: Cover
+"finishing-template.cover" = "Cover";
+// TRANSLATORS: Edge Stitch
+"finishing-template.edge-stitch" = "Edge Stitch";
+// TRANSLATORS: Edge Stitch Bottom
+"finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom";
+// TRANSLATORS: Edge Stitch Left
+"finishing-template.edge-stitch-left" = "Edge Stitch Left";
+// TRANSLATORS: Edge Stitch Right
+"finishing-template.edge-stitch-right" = "Edge Stitch Right";
+// TRANSLATORS: Edge Stitch Top
+"finishing-template.edge-stitch-top" = "Edge Stitch Top";
+// TRANSLATORS: Fold
+"finishing-template.fold" = "Fold";
+// TRANSLATORS: Accordion Fold
+"finishing-template.fold-accordion" = "Accordion Fold";
+// TRANSLATORS: Double Gate Fold
+"finishing-template.fold-double-gate" = "Double Gate Fold";
+// TRANSLATORS: Engineering Z Fold
+"finishing-template.fold-engineering-z" = "Engineering Z Fold";
+// TRANSLATORS: Gate Fold
+"finishing-template.fold-gate" = "Gate Fold";
+// TRANSLATORS: Half Fold
+"finishing-template.fold-half" = "Half Fold";
+// TRANSLATORS: Half Z Fold
+"finishing-template.fold-half-z" = "Half Z Fold";
+// TRANSLATORS: Left Gate Fold
+"finishing-template.fold-left-gate" = "Left Gate Fold";
+// TRANSLATORS: Letter Fold
+"finishing-template.fold-letter" = "Letter Fold";
+// TRANSLATORS: Parallel Fold
+"finishing-template.fold-parallel" = "Parallel Fold";
+// TRANSLATORS: Poster Fold
+"finishing-template.fold-poster" = "Poster Fold";
+// TRANSLATORS: Right Gate Fold
+"finishing-template.fold-right-gate" = "Right Gate Fold";
+// TRANSLATORS: Z Fold
+"finishing-template.fold-z" = "Z Fold";
+// TRANSLATORS: JDF F10-1
+"finishing-template.jdf-f10-1" = "JDF F10-1";
+// TRANSLATORS: JDF F10-2
+"finishing-template.jdf-f10-2" = "JDF F10-2";
+// TRANSLATORS: JDF F10-3
+"finishing-template.jdf-f10-3" = "JDF F10-3";
+// TRANSLATORS: JDF F12-1
+"finishing-template.jdf-f12-1" = "JDF F12-1";
+// TRANSLATORS: JDF F12-10
+"finishing-template.jdf-f12-10" = "JDF F12-10";
+// TRANSLATORS: JDF F12-11
+"finishing-template.jdf-f12-11" = "JDF F12-11";
+// TRANSLATORS: JDF F12-12
+"finishing-template.jdf-f12-12" = "JDF F12-12";
+// TRANSLATORS: JDF F12-13
+"finishing-template.jdf-f12-13" = "JDF F12-13";
+// TRANSLATORS: JDF F12-14
+"finishing-template.jdf-f12-14" = "JDF F12-14";
+// TRANSLATORS: JDF F12-2
+"finishing-template.jdf-f12-2" = "JDF F12-2";
+// TRANSLATORS: JDF F12-3
+"finishing-template.jdf-f12-3" = "JDF F12-3";
+// TRANSLATORS: JDF F12-4
+"finishing-template.jdf-f12-4" = "JDF F12-4";
+// TRANSLATORS: JDF F12-5
+"finishing-template.jdf-f12-5" = "JDF F12-5";
+// TRANSLATORS: JDF F12-6
+"finishing-template.jdf-f12-6" = "JDF F12-6";
+// TRANSLATORS: JDF F12-7
+"finishing-template.jdf-f12-7" = "JDF F12-7";
+// TRANSLATORS: JDF F12-8
+"finishing-template.jdf-f12-8" = "JDF F12-8";
+// TRANSLATORS: JDF F12-9
+"finishing-template.jdf-f12-9" = "JDF F12-9";
+// TRANSLATORS: JDF F14-1
+"finishing-template.jdf-f14-1" = "JDF F14-1";
+// TRANSLATORS: JDF F16-1
+"finishing-template.jdf-f16-1" = "JDF F16-1";
+// TRANSLATORS: JDF F16-10
+"finishing-template.jdf-f16-10" = "JDF F16-10";
+// TRANSLATORS: JDF F16-11
+"finishing-template.jdf-f16-11" = "JDF F16-11";
+// TRANSLATORS: JDF F16-12
+"finishing-template.jdf-f16-12" = "JDF F16-12";
+// TRANSLATORS: JDF F16-13
+"finishing-template.jdf-f16-13" = "JDF F16-13";
+// TRANSLATORS: JDF F16-14
+"finishing-template.jdf-f16-14" = "JDF F16-14";
+// TRANSLATORS: JDF F16-2
+"finishing-template.jdf-f16-2" = "JDF F16-2";
+// TRANSLATORS: JDF F16-3
+"finishing-template.jdf-f16-3" = "JDF F16-3";
+// TRANSLATORS: JDF F16-4
+"finishing-template.jdf-f16-4" = "JDF F16-4";
+// TRANSLATORS: JDF F16-5
+"finishing-template.jdf-f16-5" = "JDF F16-5";
+// TRANSLATORS: JDF F16-6
+"finishing-template.jdf-f16-6" = "JDF F16-6";
+// TRANSLATORS: JDF F16-7
+"finishing-template.jdf-f16-7" = "JDF F16-7";
+// TRANSLATORS: JDF F16-8
+"finishing-template.jdf-f16-8" = "JDF F16-8";
+// TRANSLATORS: JDF F16-9
+"finishing-template.jdf-f16-9" = "JDF F16-9";
+// TRANSLATORS: JDF F18-1
+"finishing-template.jdf-f18-1" = "JDF F18-1";
+// TRANSLATORS: JDF F18-2
+"finishing-template.jdf-f18-2" = "JDF F18-2";
+// TRANSLATORS: JDF F18-3
+"finishing-template.jdf-f18-3" = "JDF F18-3";
+// TRANSLATORS: JDF F18-4
+"finishing-template.jdf-f18-4" = "JDF F18-4";
+// TRANSLATORS: JDF F18-5
+"finishing-template.jdf-f18-5" = "JDF F18-5";
+// TRANSLATORS: JDF F18-6
+"finishing-template.jdf-f18-6" = "JDF F18-6";
+// TRANSLATORS: JDF F18-7
+"finishing-template.jdf-f18-7" = "JDF F18-7";
+// TRANSLATORS: JDF F18-8
+"finishing-template.jdf-f18-8" = "JDF F18-8";
+// TRANSLATORS: JDF F18-9
+"finishing-template.jdf-f18-9" = "JDF F18-9";
+// TRANSLATORS: JDF F2-1
+"finishing-template.jdf-f2-1" = "JDF F2-1";
+// TRANSLATORS: JDF F20-1
+"finishing-template.jdf-f20-1" = "JDF F20-1";
+// TRANSLATORS: JDF F20-2
+"finishing-template.jdf-f20-2" = "JDF F20-2";
+// TRANSLATORS: JDF F24-1
+"finishing-template.jdf-f24-1" = "JDF F24-1";
+// TRANSLATORS: JDF F24-10
+"finishing-template.jdf-f24-10" = "JDF F24-10";
+// TRANSLATORS: JDF F24-11
+"finishing-template.jdf-f24-11" = "JDF F24-11";
+// TRANSLATORS: JDF F24-2
+"finishing-template.jdf-f24-2" = "JDF F24-2";
+// TRANSLATORS: JDF F24-3
+"finishing-template.jdf-f24-3" = "JDF F24-3";
+// TRANSLATORS: JDF F24-4
+"finishing-template.jdf-f24-4" = "JDF F24-4";
+// TRANSLATORS: JDF F24-5
+"finishing-template.jdf-f24-5" = "JDF F24-5";
+// TRANSLATORS: JDF F24-6
+"finishing-template.jdf-f24-6" = "JDF F24-6";
+// TRANSLATORS: JDF F24-7
+"finishing-template.jdf-f24-7" = "JDF F24-7";
+// TRANSLATORS: JDF F24-8
+"finishing-template.jdf-f24-8" = "JDF F24-8";
+// TRANSLATORS: JDF F24-9
+"finishing-template.jdf-f24-9" = "JDF F24-9";
+// TRANSLATORS: JDF F28-1
+"finishing-template.jdf-f28-1" = "JDF F28-1";
+// TRANSLATORS: JDF F32-1
+"finishing-template.jdf-f32-1" = "JDF F32-1";
+// TRANSLATORS: JDF F32-2
+"finishing-template.jdf-f32-2" = "JDF F32-2";
+// TRANSLATORS: JDF F32-3
+"finishing-template.jdf-f32-3" = "JDF F32-3";
+// TRANSLATORS: JDF F32-4
+"finishing-template.jdf-f32-4" = "JDF F32-4";
+// TRANSLATORS: JDF F32-5
+"finishing-template.jdf-f32-5" = "JDF F32-5";
+// TRANSLATORS: JDF F32-6
+"finishing-template.jdf-f32-6" = "JDF F32-6";
+// TRANSLATORS: JDF F32-7
+"finishing-template.jdf-f32-7" = "JDF F32-7";
+// TRANSLATORS: JDF F32-8
+"finishing-template.jdf-f32-8" = "JDF F32-8";
+// TRANSLATORS: JDF F32-9
+"finishing-template.jdf-f32-9" = "JDF F32-9";
+// TRANSLATORS: JDF F36-1
+"finishing-template.jdf-f36-1" = "JDF F36-1";
+// TRANSLATORS: JDF F36-2
+"finishing-template.jdf-f36-2" = "JDF F36-2";
+// TRANSLATORS: JDF F4-1
+"finishing-template.jdf-f4-1" = "JDF F4-1";
+// TRANSLATORS: JDF F4-2
+"finishing-template.jdf-f4-2" = "JDF F4-2";
+// TRANSLATORS: JDF F40-1
+"finishing-template.jdf-f40-1" = "JDF F40-1";
+// TRANSLATORS: JDF F48-1
+"finishing-template.jdf-f48-1" = "JDF F48-1";
+// TRANSLATORS: JDF F48-2
+"finishing-template.jdf-f48-2" = "JDF F48-2";
+// TRANSLATORS: JDF F6-1
+"finishing-template.jdf-f6-1" = "JDF F6-1";
+// TRANSLATORS: JDF F6-2
+"finishing-template.jdf-f6-2" = "JDF F6-2";
+// TRANSLATORS: JDF F6-3
+"finishing-template.jdf-f6-3" = "JDF F6-3";
+// TRANSLATORS: JDF F6-4
+"finishing-template.jdf-f6-4" = "JDF F6-4";
+// TRANSLATORS: JDF F6-5
+"finishing-template.jdf-f6-5" = "JDF F6-5";
+// TRANSLATORS: JDF F6-6
+"finishing-template.jdf-f6-6" = "JDF F6-6";
+// TRANSLATORS: JDF F6-7
+"finishing-template.jdf-f6-7" = "JDF F6-7";
+// TRANSLATORS: JDF F6-8
+"finishing-template.jdf-f6-8" = "JDF F6-8";
+// TRANSLATORS: JDF F64-1
+"finishing-template.jdf-f64-1" = "JDF F64-1";
+// TRANSLATORS: JDF F64-2
+"finishing-template.jdf-f64-2" = "JDF F64-2";
+// TRANSLATORS: JDF F8-1
+"finishing-template.jdf-f8-1" = "JDF F8-1";
+// TRANSLATORS: JDF F8-2
+"finishing-template.jdf-f8-2" = "JDF F8-2";
+// TRANSLATORS: JDF F8-3
+"finishing-template.jdf-f8-3" = "JDF F8-3";
+// TRANSLATORS: JDF F8-4
+"finishing-template.jdf-f8-4" = "JDF F8-4";
+// TRANSLATORS: JDF F8-5
+"finishing-template.jdf-f8-5" = "JDF F8-5";
+// TRANSLATORS: JDF F8-6
+"finishing-template.jdf-f8-6" = "JDF F8-6";
+// TRANSLATORS: JDF F8-7
+"finishing-template.jdf-f8-7" = "JDF F8-7";
+// TRANSLATORS: Jog Offset
+"finishing-template.jog-offset" = "Jog Offset";
+// TRANSLATORS: Laminate
+"finishing-template.laminate" = "Laminate";
+// TRANSLATORS: Punch
+"finishing-template.punch" = "Punch";
+// TRANSLATORS: Punch Bottom Left
+"finishing-template.punch-bottom-left" = "Punch Bottom Left";
+// TRANSLATORS: Punch Bottom Right
+"finishing-template.punch-bottom-right" = "Punch Bottom Right";
+// TRANSLATORS: 2-hole Punch Bottom
+"finishing-template.punch-dual-bottom" = "2-hole Punch Bottom";
+// TRANSLATORS: 2-hole Punch Left
+"finishing-template.punch-dual-left" = "2-hole Punch Left";
+// TRANSLATORS: 2-hole Punch Right
+"finishing-template.punch-dual-right" = "2-hole Punch Right";
+// TRANSLATORS: 2-hole Punch Top
+"finishing-template.punch-dual-top" = "2-hole Punch Top";
+// TRANSLATORS: Multi-hole Punch Bottom
+"finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom";
+// TRANSLATORS: Multi-hole Punch Left
+"finishing-template.punch-multiple-left" = "Multi-hole Punch Left";
+// TRANSLATORS: Multi-hole Punch Right
+"finishing-template.punch-multiple-right" = "Multi-hole Punch Right";
+// TRANSLATORS: Multi-hole Punch Top
+"finishing-template.punch-multiple-top" = "Multi-hole Punch Top";
+// TRANSLATORS: 4-hole Punch Bottom
+"finishing-template.punch-quad-bottom" = "4-hole Punch Bottom";
+// TRANSLATORS: 4-hole Punch Left
+"finishing-template.punch-quad-left" = "4-hole Punch Left";
+// TRANSLATORS: 4-hole Punch Right
+"finishing-template.punch-quad-right" = "4-hole Punch Right";
+// TRANSLATORS: 4-hole Punch Top
+"finishing-template.punch-quad-top" = "4-hole Punch Top";
+// TRANSLATORS: Punch Top Left
+"finishing-template.punch-top-left" = "Punch Top Left";
+// TRANSLATORS: Punch Top Right
+"finishing-template.punch-top-right" = "Punch Top Right";
+// TRANSLATORS: 3-hole Punch Bottom
+"finishing-template.punch-triple-bottom" = "3-hole Punch Bottom";
+// TRANSLATORS: 3-hole Punch Left
+"finishing-template.punch-triple-left" = "3-hole Punch Left";
+// TRANSLATORS: 3-hole Punch Right
+"finishing-template.punch-triple-right" = "3-hole Punch Right";
+// TRANSLATORS: 3-hole Punch Top
+"finishing-template.punch-triple-top" = "3-hole Punch Top";
+// TRANSLATORS: Saddle Stitch
+"finishing-template.saddle-stitch" = "Saddle Stitch";
+// TRANSLATORS: Staple
+"finishing-template.staple" = "Staple";
+// TRANSLATORS: Staple Bottom Left
+"finishing-template.staple-bottom-left" = "Staple Bottom Left";
+// TRANSLATORS: Staple Bottom Right
+"finishing-template.staple-bottom-right" = "Staple Bottom Right";
+// TRANSLATORS: 2 Staples on Bottom
+"finishing-template.staple-dual-bottom" = "2 Staples on Bottom";
+// TRANSLATORS: 2 Staples on Left
+"finishing-template.staple-dual-left" = "2 Staples on Left";
+// TRANSLATORS: 2 Staples on Right
+"finishing-template.staple-dual-right" = "2 Staples on Right";
+// TRANSLATORS: 2 Staples on Top
+"finishing-template.staple-dual-top" = "2 Staples on Top";
+// TRANSLATORS: Staple Top Left
+"finishing-template.staple-top-left" = "Staple Top Left";
+// TRANSLATORS: Staple Top Right
+"finishing-template.staple-top-right" = "Staple Top Right";
+// TRANSLATORS: 3 Staples on Bottom
+"finishing-template.staple-triple-bottom" = "3 Staples on Bottom";
+// TRANSLATORS: 3 Staples on Left
+"finishing-template.staple-triple-left" = "3 Staples on Left";
+// TRANSLATORS: 3 Staples on Right
+"finishing-template.staple-triple-right" = "3 Staples on Right";
+// TRANSLATORS: 3 Staples on Top
+"finishing-template.staple-triple-top" = "3 Staples on Top";
+// TRANSLATORS: Trim
+"finishing-template.trim" = "Trim";
+// TRANSLATORS: Trim After Every Set
+"finishing-template.trim-after-copies" = "Trim After Every Set";
+// TRANSLATORS: Trim After Every Document
+"finishing-template.trim-after-documents" = "Trim After Every Document";
+// TRANSLATORS: Trim After Job
+"finishing-template.trim-after-job" = "Trim After Job";
+// TRANSLATORS: Trim After Every Page
+"finishing-template.trim-after-pages" = "Trim After Every Page";
+// TRANSLATORS: Finishings
+"finishings" = "Finishings";
+// TRANSLATORS: Finishings
+"finishings-col" = "Finishings";
+// TRANSLATORS: Fold
+"finishings.10" = "Fold";
+// TRANSLATORS: Z Fold
+"finishings.100" = "Z Fold";
+// TRANSLATORS: Engineering Z Fold
+"finishings.101" = "Engineering Z Fold";
+// TRANSLATORS: Trim
+"finishings.11" = "Trim";
+// TRANSLATORS: Bale
+"finishings.12" = "Bale";
+// TRANSLATORS: Booklet Maker
+"finishings.13" = "Booklet Maker";
+// TRANSLATORS: Jog Offset
+"finishings.14" = "Jog Offset";
+// TRANSLATORS: Coat
+"finishings.15" = "Coat";
+// TRANSLATORS: Laminate
+"finishings.16" = "Laminate";
+// TRANSLATORS: Staple Top Left
+"finishings.20" = "Staple Top Left";
+// TRANSLATORS: Staple Bottom Left
+"finishings.21" = "Staple Bottom Left";
+// TRANSLATORS: Staple Top Right
+"finishings.22" = "Staple Top Right";
+// TRANSLATORS: Staple Bottom Right
+"finishings.23" = "Staple Bottom Right";
+// TRANSLATORS: Edge Stitch Left
+"finishings.24" = "Edge Stitch Left";
+// TRANSLATORS: Edge Stitch Top
+"finishings.25" = "Edge Stitch Top";
+// TRANSLATORS: Edge Stitch Right
+"finishings.26" = "Edge Stitch Right";
+// TRANSLATORS: Edge Stitch Bottom
+"finishings.27" = "Edge Stitch Bottom";
+// TRANSLATORS: 2 Staples on Left
+"finishings.28" = "2 Staples on Left";
+// TRANSLATORS: 2 Staples on Top
+"finishings.29" = "2 Staples on Top";
+// TRANSLATORS: None
+"finishings.3" = "None";
+// TRANSLATORS: 2 Staples on Right
+"finishings.30" = "2 Staples on Right";
+// TRANSLATORS: 2 Staples on Bottom
+"finishings.31" = "2 Staples on Bottom";
+// TRANSLATORS: 3 Staples on Left
+"finishings.32" = "3 Staples on Left";
+// TRANSLATORS: 3 Staples on Top
+"finishings.33" = "3 Staples on Top";
+// TRANSLATORS: 3 Staples on Right
+"finishings.34" = "3 Staples on Right";
+// TRANSLATORS: 3 Staples on Bottom
+"finishings.35" = "3 Staples on Bottom";
+// TRANSLATORS: Staple
+"finishings.4" = "Staple";
+// TRANSLATORS: Punch
+"finishings.5" = "Punch";
+// TRANSLATORS: Bind Left
+"finishings.50" = "Bind Left";
+// TRANSLATORS: Bind Top
+"finishings.51" = "Bind Top";
+// TRANSLATORS: Bind Right
+"finishings.52" = "Bind Right";
+// TRANSLATORS: Bind Bottom
+"finishings.53" = "Bind Bottom";
+// TRANSLATORS: Cover
+"finishings.6" = "Cover";
+// TRANSLATORS: Trim Pages
+"finishings.60" = "Trim Pages";
+// TRANSLATORS: Trim Documents
+"finishings.61" = "Trim Documents";
+// TRANSLATORS: Trim Copies
+"finishings.62" = "Trim Copies";
+// TRANSLATORS: Trim Job
+"finishings.63" = "Trim Job";
+// TRANSLATORS: Bind
+"finishings.7" = "Bind";
+// TRANSLATORS: Punch Top Left
+"finishings.70" = "Punch Top Left";
+// TRANSLATORS: Punch Bottom Left
+"finishings.71" = "Punch Bottom Left";
+// TRANSLATORS: Punch Top Right
+"finishings.72" = "Punch Top Right";
+// TRANSLATORS: Punch Bottom Right
+"finishings.73" = "Punch Bottom Right";
+// TRANSLATORS: 2-hole Punch Left
+"finishings.74" = "2-hole Punch Left";
+// TRANSLATORS: 2-hole Punch Top
+"finishings.75" = "2-hole Punch Top";
+// TRANSLATORS: 2-hole Punch Right
+"finishings.76" = "2-hole Punch Right";
+// TRANSLATORS: 2-hole Punch Bottom
+"finishings.77" = "2-hole Punch Bottom";
+// TRANSLATORS: 3-hole Punch Left
+"finishings.78" = "3-hole Punch Left";
+// TRANSLATORS: 3-hole Punch Top
+"finishings.79" = "3-hole Punch Top";
+// TRANSLATORS: Saddle Stitch
+"finishings.8" = "Saddle Stitch";
+// TRANSLATORS: 3-hole Punch Right
+"finishings.80" = "3-hole Punch Right";
+// TRANSLATORS: 3-hole Punch Bottom
+"finishings.81" = "3-hole Punch Bottom";
+// TRANSLATORS: 4-hole Punch Left
+"finishings.82" = "4-hole Punch Left";
+// TRANSLATORS: 4-hole Punch Top
+"finishings.83" = "4-hole Punch Top";
+// TRANSLATORS: 4-hole Punch Right
+"finishings.84" = "4-hole Punch Right";
+// TRANSLATORS: 4-hole Punch Bottom
+"finishings.85" = "4-hole Punch Bottom";
+// TRANSLATORS: Multi-hole Punch Left
+"finishings.86" = "Multi-hole Punch Left";
+// TRANSLATORS: Multi-hole Punch Top
+"finishings.87" = "Multi-hole Punch Top";
+// TRANSLATORS: Multi-hole Punch Right
+"finishings.88" = "Multi-hole Punch Right";
+// TRANSLATORS: Multi-hole Punch Bottom
+"finishings.89" = "Multi-hole Punch Bottom";
+// TRANSLATORS: Edge Stitch
+"finishings.9" = "Edge Stitch";
+// TRANSLATORS: Accordion Fold
+"finishings.90" = "Accordion Fold";
+// TRANSLATORS: Double Gate Fold
+"finishings.91" = "Double Gate Fold";
+// TRANSLATORS: Gate Fold
+"finishings.92" = "Gate Fold";
+// TRANSLATORS: Half Fold
+"finishings.93" = "Half Fold";
+// TRANSLATORS: Half Z Fold
+"finishings.94" = "Half Z Fold";
+// TRANSLATORS: Left Gate Fold
+"finishings.95" = "Left Gate Fold";
+// TRANSLATORS: Letter Fold
+"finishings.96" = "Letter Fold";
+// TRANSLATORS: Parallel Fold
+"finishings.97" = "Parallel Fold";
+// TRANSLATORS: Poster Fold
+"finishings.98" = "Poster Fold";
+// TRANSLATORS: Right Gate Fold
+"finishings.99" = "Right Gate Fold";
+// TRANSLATORS: Fold
+"folding" = "Fold";
+// TRANSLATORS: Fold Direction
+"folding-direction" = "Fold Direction";
+// TRANSLATORS: Inward
+"folding-direction.inward" = "Inward";
+// TRANSLATORS: Outward
+"folding-direction.outward" = "Outward";
+// TRANSLATORS: Fold Position
+"folding-offset" = "Fold Position";
+// TRANSLATORS: Fold Edge
+"folding-reference-edge" = "Fold Edge";
+// TRANSLATORS: Bottom
+"folding-reference-edge.bottom" = "Bottom";
+// TRANSLATORS: Left
+"folding-reference-edge.left" = "Left";
+// TRANSLATORS: Right
+"folding-reference-edge.right" = "Right";
+// TRANSLATORS: Top
+"folding-reference-edge.top" = "Top";
+// TRANSLATORS: Font Name
+"font-name-requested" = "Font Name";
+// TRANSLATORS: Font Size
+"font-size-requested" = "Font Size";
+// TRANSLATORS: Force Front Side
+"force-front-side" = "Force Front Side";
+// TRANSLATORS: From Name
+"from-name" = "From Name";
"held" = "held";
"help\t\tGet help on commands." = "help\t\tGet help on commands.";
"idle" = "idle";
+// TRANSLATORS: Imposition Template
+"imposition-template" = "Imposition Template";
+// TRANSLATORS: None
+"imposition-template.none" = "None";
+// TRANSLATORS: Signature
+"imposition-template.signature" = "Signature";
+// TRANSLATORS: Insert Page Number
+"insert-after-page-number" = "Insert Page Number";
+// TRANSLATORS: Insert Count
+"insert-count" = "Insert Count";
+// TRANSLATORS: Insert Sheet
+"insert-sheet" = "Insert Sheet";
+"ippeveprinter: Unable to open \"%s\": %s on line %d." = "ippeveprinter: Unable to open “%s”: %s on line %d.";
"ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s";
"ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or.";
"ippfind: Expected key name after %s." = "ippfind: Expected key name after %s.";
"ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s.";
"ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution.";
"ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis.";
-"ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before \"--and\".";
-"ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before \"--or\".";
+"ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”.";
+"ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”.";
"ippfind: Missing key name after %s." = "ippfind: Missing key name after %s.";
+"ippfind: Missing name after %s." = "ippfind: Missing name after %s.";
"ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis.";
"ippfind: Missing program after %s." = "ippfind: Missing program after %s.";
"ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s.";
"ippfind: Out of memory." = "ippfind: Out of memory.";
"ippfind: Too many parenthesis." = "ippfind: Too many parenthesis.";
"ippfind: Unable to browse or resolve: %s" = "ippfind: Unable to browse or resolve: %s";
-"ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute \"%s\": %s";
+"ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s";
"ippfind: Unable to use Bonjour: %s" = "ippfind: Unable to use Bonjour: %s";
-"ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable \"{%s}\".";
-"ipptool: \"-i\" and \"-n\" are incompatible with -X\"." = "ipptool: \"-i\" and \"-n\" are incompatible with -X\".";
-"ipptool: Bad URI - %s." = "ipptool: Bad URI - %s.";
-"ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for \"-i\".";
+"ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”.";
+"ipptool: \"-i\" and \"-n\" are incompatible with \"--ippserver\", \"-P\", and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “--ippserver”, “-P”, and “-X”.";
+"ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”.";
+"ipptool: Bad URI \"%s\"." = "ipptool: Bad URI “%s”.";
+"ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”.";
"ipptool: May only specify a single URI." = "ipptool: May only specify a single URI.";
-"ipptool: Missing count for \"-n\"." = "ipptool: Missing count for \"-n\".";
-"ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for \"-f\".";
-"ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for \"-d\".";
-"ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for \"-i\".";
+"ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”.";
+"ipptool: Missing filename for \"--ippserver\"." = "ipptool: Missing filename for “--ippserver”.";
+"ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”.";
+"ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”.";
+"ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”.";
"ipptool: URI required before test file." = "ipptool: URI required before test file.";
-"ipptool: Unknown option \"-%c\"." = "ipptool: Unknown option \"-%c\".";
+// TRANSLATORS: Job Account ID
+"job-account-id" = "Job Account ID";
+// TRANSLATORS: Job Account Type
+"job-account-type" = "Job Account Type";
+// TRANSLATORS: General
+"job-account-type.general" = "General";
+// TRANSLATORS: Group
+"job-account-type.group" = "Group";
+// TRANSLATORS: None
+"job-account-type.none" = "None";
+// TRANSLATORS: Job Accounting Output Bin
+"job-accounting-output-bin" = "Job Accounting Output Bin";
+// TRANSLATORS: Job Accounting Sheets
+"job-accounting-sheets" = "Job Accounting Sheets";
+// TRANSLATORS: Type of Job Accounting Sheets
+"job-accounting-sheets-type" = "Type of Job Accounting Sheets";
+// TRANSLATORS: None
+"job-accounting-sheets-type.none" = "None";
+// TRANSLATORS: Standard
+"job-accounting-sheets-type.standard" = "Standard";
+// TRANSLATORS: Job Accounting User ID
+"job-accounting-user-id" = "Job Accounting User ID";
+// TRANSLATORS: Job Cancel After
+"job-cancel-after" = "job-cancel-after";
+// TRANSLATORS: Copies
+"job-copies" = "Copies";
+// TRANSLATORS: Back Cover
+"job-cover-back" = "Back Cover";
+// TRANSLATORS: Front Cover
+"job-cover-front" = "Front Cover";
+// TRANSLATORS: Delay Output Until
+"job-delay-output-until" = "Delay Output Until";
+// TRANSLATORS: Delay Output Until
+"job-delay-output-until-time" = "Delay Output Until";
+// TRANSLATORS: Daytime
+"job-delay-output-until.day-time" = "Daytime";
+// TRANSLATORS: Evening
+"job-delay-output-until.evening" = "Evening";
+// TRANSLATORS: Released
+"job-delay-output-until.indefinite" = "Released";
+// TRANSLATORS: Night
+"job-delay-output-until.night" = "Night";
+// TRANSLATORS: No Delay
+"job-delay-output-until.no-delay-output" = "No Delay";
+// TRANSLATORS: Second Shift
+"job-delay-output-until.second-shift" = "Second Shift";
+// TRANSLATORS: Third Shift
+"job-delay-output-until.third-shift" = "Third Shift";
+// TRANSLATORS: Weekend
+"job-delay-output-until.weekend" = "Weekend";
+// TRANSLATORS: On Error
+"job-error-action" = "On Error";
+// TRANSLATORS: Abort Job
+"job-error-action.abort-job" = "Abort Job";
+// TRANSLATORS: Cancel Job
+"job-error-action.cancel-job" = "Cancel Job";
+// TRANSLATORS: Continue Job
+"job-error-action.continue-job" = "Continue Job";
+// TRANSLATORS: Suspend Job
+"job-error-action.suspend-job" = "Suspend Job";
+// TRANSLATORS: Print Error Sheet
+"job-error-sheet" = "Print Error Sheet";
+// TRANSLATORS: Type of Error Sheet
+"job-error-sheet-type" = "Type of Error Sheet";
+// TRANSLATORS: None
+"job-error-sheet-type.none" = "None";
+// TRANSLATORS: Standard
+"job-error-sheet-type.standard" = "Standard";
+// TRANSLATORS: Print Error Sheet
+"job-error-sheet-when" = "Print Error Sheet";
+// TRANSLATORS: Always
+"job-error-sheet-when.always" = "Always";
+// TRANSLATORS: On Error
+"job-error-sheet-when.on-error" = "On Error";
+// TRANSLATORS: Job Finishings
+"job-finishings" = "Job Finishings";
+// TRANSLATORS: Hold Until
+"job-hold-until" = "Hold Until";
+// TRANSLATORS: Hold Until
+"job-hold-until-time" = "Hold Until";
+// TRANSLATORS: Daytime
+"job-hold-until.day-time" = "Daytime";
+// TRANSLATORS: Evening
+"job-hold-until.evening" = "Evening";
+// TRANSLATORS: Released
+"job-hold-until.indefinite" = "Released";
+// TRANSLATORS: Night
+"job-hold-until.night" = "Night";
+// TRANSLATORS: No Hold
+"job-hold-until.no-hold" = "No Hold";
+// TRANSLATORS: Second Shift
+"job-hold-until.second-shift" = "Second Shift";
+// TRANSLATORS: Third Shift
+"job-hold-until.third-shift" = "Third Shift";
+// TRANSLATORS: Weekend
+"job-hold-until.weekend" = "Weekend";
+// TRANSLATORS: Job Mandatory Attributes
+"job-mandatory-attributes" = "Job Mandatory Attributes";
+// TRANSLATORS: Title
+"job-name" = "Title";
+// TRANSLATORS: Job Pages
+"job-pages" = "Job Pages";
+// TRANSLATORS: Job Pages
+"job-pages-col" = "Job Pages";
+// TRANSLATORS: Job Phone Number
+"job-phone-number" = "Job Phone Number";
"job-printer-uri attribute missing." = "job-printer-uri attribute missing.";
+// TRANSLATORS: Job Priority
+"job-priority" = "Job Priority";
+// TRANSLATORS: Job Privacy Attributes
+"job-privacy-attributes" = "Job Privacy Attributes";
+// TRANSLATORS: All
+"job-privacy-attributes.all" = "All";
+// TRANSLATORS: Default
+"job-privacy-attributes.default" = "Default";
+// TRANSLATORS: Job Description
+"job-privacy-attributes.job-description" = "Job Description";
+// TRANSLATORS: Job Template
+"job-privacy-attributes.job-template" = "Job Template";
+// TRANSLATORS: None
+"job-privacy-attributes.none" = "None";
+// TRANSLATORS: Job Privacy Scope
+"job-privacy-scope" = "Job Privacy Scope";
+// TRANSLATORS: All
+"job-privacy-scope.all" = "All";
+// TRANSLATORS: Default
+"job-privacy-scope.default" = "Default";
+// TRANSLATORS: None
+"job-privacy-scope.none" = "None";
+// TRANSLATORS: Owner
+"job-privacy-scope.owner" = "Owner";
+// TRANSLATORS: Job Recipient Name
+"job-recipient-name" = "Job Recipient Name";
+// TRANSLATORS: Job Retain Until
+"job-retain-until" = "job-retain-until";
+// TRANSLATORS: Job Retain Until Interval
+"job-retain-until-interval" = "job-retain-until-interval";
+// TRANSLATORS: Job Retain Until Time
+"job-retain-until-time" = "job-retain-until-time";
+// TRANSLATORS: End Of Day
+"job-retain-until.end-of-day" = "job-retain-until.end-of-day";
+// TRANSLATORS: End Of Month
+"job-retain-until.end-of-month" = "job-retain-until.end-of-month";
+// TRANSLATORS: End Of Week
+"job-retain-until.end-of-week" = "job-retain-until.end-of-week";
+// TRANSLATORS: Indefinite
+"job-retain-until.indefinite" = "job-retain-until.indefinite";
+// TRANSLATORS: None
+"job-retain-until.none" = "job-retain-until.none";
+// TRANSLATORS: Job Save Disposition
+"job-save-disposition" = "Job Save Disposition";
+// TRANSLATORS: Job Sheet Message
+"job-sheet-message" = "Job Sheet Message";
+// TRANSLATORS: Banner Page
+"job-sheets" = "Banner Page";
+// TRANSLATORS: Banner Page
+"job-sheets-col" = "Banner Page";
+// TRANSLATORS: First Page in Document
+"job-sheets.first-print-stream-page" = "First Page in Document";
+// TRANSLATORS: Start and End Sheets
+"job-sheets.job-both-sheet" = "Start and End Sheets";
+// TRANSLATORS: End Sheet
+"job-sheets.job-end-sheet" = "End Sheet";
+// TRANSLATORS: Start Sheet
+"job-sheets.job-start-sheet" = "Start Sheet";
+// TRANSLATORS: None
+"job-sheets.none" = "None";
+// TRANSLATORS: Standard
+"job-sheets.standard" = "Standard";
+// TRANSLATORS: Job State
+"job-state" = "Job State";
+// TRANSLATORS: Job State Message
+"job-state-message" = "Job State Message";
+// TRANSLATORS: Detailed Job State
+"job-state-reasons" = "Detailed Job State";
+// TRANSLATORS: Stopping
+"job-state-reasons.aborted-by-system" = "Aborted By System";
+// TRANSLATORS: Account Authorization Failed
+"job-state-reasons.account-authorization-failed" = "Account Authorization Failed";
+// TRANSLATORS: Account Closed
+"job-state-reasons.account-closed" = "Account Closed";
+// TRANSLATORS: Account Info Needed
+"job-state-reasons.account-info-needed" = "Account Info Needed";
+// TRANSLATORS: Account Limit Reached
+"job-state-reasons.account-limit-reached" = "Account Limit Reached";
+// TRANSLATORS: Decompression error
+"job-state-reasons.compression-error" = "Compression Error";
+// TRANSLATORS: Conflicting Attributes
+"job-state-reasons.conflicting-attributes" = "Conflicting Attributes";
+// TRANSLATORS: Connected To Destination
+"job-state-reasons.connected-to-destination" = "Connected To Destination";
+// TRANSLATORS: Connecting To Destination
+"job-state-reasons.connecting-to-destination" = "Connecting To Destination";
+// TRANSLATORS: Destination Uri Failed
+"job-state-reasons.destination-uri-failed" = "Destination Uri Failed";
+// TRANSLATORS: Digital Signature Did Not Verify
+"job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
+// TRANSLATORS: Digital Signature Type Not Supported
+"job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
+// TRANSLATORS: Document Access Error
+"job-state-reasons.document-access-error" = "Document Access Error";
+// TRANSLATORS: Document Format Error
+"job-state-reasons.document-format-error" = "Document Format Error";
+// TRANSLATORS: Document Password Error
+"job-state-reasons.document-password-error" = "Document Password Error";
+// TRANSLATORS: Document Permission Error
+"job-state-reasons.document-permission-error" = "Document Permission Error";
+// TRANSLATORS: Document Security Error
+"job-state-reasons.document-security-error" = "Document Security Error";
+// TRANSLATORS: Document Unprintable Error
+"job-state-reasons.document-unprintable-error" = "Document Unprintable Error";
+// TRANSLATORS: Errors Detected
+"job-state-reasons.errors-detected" = "Errors Detected";
+// TRANSLATORS: Canceled at printer
+"job-state-reasons.job-canceled-at-device" = "Job Canceled At Device";
+// TRANSLATORS: Canceled by operator
+"job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator";
+// TRANSLATORS: Canceled by user
+"job-state-reasons.job-canceled-by-user" = "Job Canceled By User";
+// TRANSLATORS:
+"job-state-reasons.job-completed-successfully" = "Job Completed Successfully";
+// TRANSLATORS: Completed with errors
+"job-state-reasons.job-completed-with-errors" = "Job Completed With Errors";
+// TRANSLATORS: Completed with warnings
+"job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings";
+// TRANSLATORS: Insufficient data
+"job-state-reasons.job-data-insufficient" = "Job Data Insufficient";
+// TRANSLATORS: Job Delay Output Until Specified
+"job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified";
+// TRANSLATORS: Job Digital Signature Wait
+"job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait";
+// TRANSLATORS: Job Fetchable
+"job-state-reasons.job-fetchable" = "Job Fetchable";
+// TRANSLATORS: Job Held For Review
+"job-state-reasons.job-held-for-review" = "Job Held For Review";
+// TRANSLATORS: Job held
+"job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified";
+// TRANSLATORS: Incoming
+"job-state-reasons.job-incoming" = "Job Incoming";
+// TRANSLATORS: Interpreting
+"job-state-reasons.job-interpreting" = "Job Interpreting";
+// TRANSLATORS: Outgoing
+"job-state-reasons.job-outgoing" = "Job Outgoing";
+// TRANSLATORS: Job Password Wait
+"job-state-reasons.job-password-wait" = "Job Password Wait";
+// TRANSLATORS: Job Printed Successfully
+"job-state-reasons.job-printed-successfully" = "Job Printed Successfully";
+// TRANSLATORS: Job Printed With Errors
+"job-state-reasons.job-printed-with-errors" = "Job Printed With Errors";
+// TRANSLATORS: Job Printed With Warnings
+"job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings";
+// TRANSLATORS: Printing
+"job-state-reasons.job-printing" = "Job Printing";
+// TRANSLATORS: Preparing to print
+"job-state-reasons.job-queued" = "Job Queued";
+// TRANSLATORS: Processing document
+"job-state-reasons.job-queued-for-marker" = "Job Queued For Marker";
+// TRANSLATORS: Job Release Wait
+"job-state-reasons.job-release-wait" = "Job Release Wait";
+// TRANSLATORS: Restartable
+"job-state-reasons.job-restartable" = "Job Restartable";
+// TRANSLATORS: Job Resuming
+"job-state-reasons.job-resuming" = "Job Resuming";
+// TRANSLATORS: Job Saved Successfully
+"job-state-reasons.job-saved-successfully" = "Job Saved Successfully";
+// TRANSLATORS: Job Saved With Errors
+"job-state-reasons.job-saved-with-errors" = "Job Saved With Errors";
+// TRANSLATORS: Job Saved With Warnings
+"job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings";
+// TRANSLATORS: Job Saving
+"job-state-reasons.job-saving" = "Job Saving";
+// TRANSLATORS: Job Spooling
+"job-state-reasons.job-spooling" = "Job Spooling";
+// TRANSLATORS: Job Streaming
+"job-state-reasons.job-streaming" = "Job Streaming";
+// TRANSLATORS: Suspended
+"job-state-reasons.job-suspended" = "Job Suspended";
+// TRANSLATORS: Job Suspended By Operator
+"job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator";
+// TRANSLATORS: Job Suspended By System
+"job-state-reasons.job-suspended-by-system" = "Job Suspended By System";
+// TRANSLATORS: Job Suspended By User
+"job-state-reasons.job-suspended-by-user" = "Job Suspended By User";
+// TRANSLATORS: Job Suspending
+"job-state-reasons.job-suspending" = "Job Suspending";
+// TRANSLATORS: Job Transferring
+"job-state-reasons.job-transferring" = "Job Transferring";
+// TRANSLATORS: Transforming
+"job-state-reasons.job-transforming" = "Job Transforming";
+// TRANSLATORS: None
+"job-state-reasons.none" = "None";
+// TRANSLATORS: Printer offline
+"job-state-reasons.printer-stopped" = "Printer Stopped";
+// TRANSLATORS: Printer partially stopped
+"job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly";
+// TRANSLATORS: Stopping
+"job-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
+// TRANSLATORS: Ready
+"job-state-reasons.queued-in-device" = "Queued In Device";
+// TRANSLATORS: Resources Are Not Ready
+"job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
+// TRANSLATORS: Resources Are Not Supported
+"job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
+// TRANSLATORS: Service offline
+"job-state-reasons.service-off-line" = "Service Off Line";
+// TRANSLATORS: Submission Interrupted
+"job-state-reasons.submission-interrupted" = "Submission Interrupted";
+// TRANSLATORS: Unsupported Attributes Or Values
+"job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values";
+// TRANSLATORS: Unsupported Compression
+"job-state-reasons.unsupported-compression" = "Unsupported Compression";
+// TRANSLATORS: Unsupported Document Format
+"job-state-reasons.unsupported-document-format" = "Unsupported Document Format";
+// TRANSLATORS: Waiting For User Action
+"job-state-reasons.waiting-for-user-action" = "Waiting For User Action";
+// TRANSLATORS: Warnings Detected
+"job-state-reasons.warnings-detected" = "Warnings Detected";
+// TRANSLATORS: Pending
+"job-state.3" = "Pending";
+// TRANSLATORS: Held
+"job-state.4" = "Held";
+// TRANSLATORS: Processing
+"job-state.5" = "Processing";
+// TRANSLATORS: Stopped
+"job-state.6" = "Stopped";
+// TRANSLATORS: Canceled
+"job-state.7" = "Canceled";
+// TRANSLATORS: Aborted
+"job-state.8" = "Aborted";
+// TRANSLATORS: Completed
+"job-state.9" = "Completed";
+// TRANSLATORS: Laminate Pages
+"laminating" = "Laminate Pages";
+// TRANSLATORS: Laminate
+"laminating-sides" = "Laminate";
+// TRANSLATORS: Back Only
+"laminating-sides.back" = "Back Only";
+// TRANSLATORS: Front and Back
+"laminating-sides.both" = "Front and Back";
+// TRANSLATORS: Front Only
+"laminating-sides.front" = "Front Only";
+// TRANSLATORS: Type of Lamination
+"laminating-type" = "Type of Lamination";
+// TRANSLATORS: Archival
+"laminating-type.archival" = "Archival";
+// TRANSLATORS: Glossy
+"laminating-type.glossy" = "Glossy";
+// TRANSLATORS: High Gloss
+"laminating-type.high-gloss" = "High Gloss";
+// TRANSLATORS: Matte
+"laminating-type.matte" = "Matte";
+// TRANSLATORS: Semi-gloss
+"laminating-type.semi-gloss" = "Semi-gloss";
+// TRANSLATORS: Translucent
+"laminating-type.translucent" = "Translucent";
+// TRANSLATORS: Logo
+"logo" = "Logo";
"lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters.";
-"lpadmin: Expected PPD after \"-P\" option." = "lpadmin: Expected PPD after \"-P\" option.";
-"lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after \"-u\" option.";
-"lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after \"-r\" option.";
-"lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after \"-c\" option.";
-"lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after \"-D\" option.";
-"lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after \"-v\" option.";
-"lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after \"-I\" option.";
-"lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after \"-h\" option.";
-"lpadmin: Expected interface after \"-i\" option." = "lpadmin: Expected interface after \"-i\" option.";
-"lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after \"-L\" option.";
-"lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after \"-m\" option.";
-"lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after \"-R\" option.";
-"lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after \"-o\" option.";
-"lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after \"-p\" option.";
-"lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after \"-d\" option.";
-"lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after \"-x\" option.";
+"lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option.";
+"lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option.";
+"lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option.";
+"lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option.";
+"lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option.";
+"lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option.";
+"lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option.";
+"lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option.";
+"lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option.";
+"lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option.";
+"lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option.";
+"lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option.";
+"lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option.";
+"lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option.";
+"lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option.";
"lpadmin: No member names were seen." = "lpadmin: No member names were seen.";
"lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s.";
"lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s.";
+"lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS." = "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.";
"lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters.";
+"lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS." = "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS.";
+"lpadmin: Raw queues are no longer supported on macOS." = "lpadmin: Raw queues are no longer supported on macOS.";
+"lpadmin: System V interface scripts are no longer supported for security reasons." = "lpadmin: System V interface scripts are no longer supported for security reasons.";
"lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first.";
"lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s";
"lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file";
"lpadmin: Unable to delete option:\n You must specify a printer name first." = "lpadmin: Unable to delete option:\n You must specify a printer name first.";
-"lpadmin: Unable to open PPD file \"%s\" - %s" = "lpadmin: Unable to open PPD file \"%s\" - %s";
+"lpadmin: Unable to open PPD \"%s\": %s" = "lpadmin: Unable to open PPD “%s”: %s";
+"lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d.";
"lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first.";
"lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first.";
-"lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option \"%s\".";
-"lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument \"%s\".";
-"lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option \"%c\".";
+"lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”.";
+"lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”.";
+"lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”.";
+"lpadmin: Use the 'everywhere' model for shared printers." = "lpadmin: Use the ‘everywhere’ model for shared printers.";
"lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored.";
"lpc> " = "lpc> ";
-"lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after \"--device-id\".";
-"lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after \"--language\".";
-"lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after \"--make-and-model\".";
-"lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after \"--product\".";
-"lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after \"--exclude-schemes\".";
-"lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after \"--include-schemes\".";
-"lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after \"--timeout\".";
-"lpinfo: Unknown argument \"%s\"." = "lpinfo: Unknown argument \"%s\".";
-"lpinfo: Unknown option \"%c\"." = "lpinfo: Unknown option \"%c\".";
-"lpinfo: Unknown option \"%s\"." = "lpinfo: Unknown option \"%s\".";
+"lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”.";
+"lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”.";
+"lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”.";
+"lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”.";
+"lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”.";
+"lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”.";
+"lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”.";
"lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s";
-"lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument \"%s\".";
-"lpmove: Unknown option \"%c\"." = "lpmove: Unknown option \"%c\".";
+"lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”.";
"lpoptions: No printers." = "lpoptions: No printers.";
"lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s";
"lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s";
"lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s.";
"lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class.";
-"lppasswd: Only root can add or delete passwords." = "lppasswd: Only root can add or delete passwords.";
-"lppasswd: Password file busy." = "lppasswd: Password file busy.";
-"lppasswd: Password file not updated." = "lppasswd: Password file not updated.";
-"lppasswd: Sorry, password doesn't match." = "lppasswd: Sorry, password doesn't match.";
-"lppasswd: Sorry, password rejected." = "lppasswd: Sorry, password rejected.";
-"lppasswd: Sorry, passwords don't match." = "lppasswd: Sorry, passwords don't match.";
-"lppasswd: Unable to copy password string: %s" = "lppasswd: Unable to copy password string: %s";
-"lppasswd: Unable to open password file: %s" = "lppasswd: Unable to open password file: %s";
-"lppasswd: Unable to write to password file: %s" = "lppasswd: Unable to write to password file: %s";
-"lppasswd: failed to backup old password file: %s" = "lppasswd: failed to backup old password file: %s";
-"lppasswd: failed to rename password file: %s" = "lppasswd: failed to rename password file: %s";
-"lppasswd: user \"%s\" and group \"%s\" do not exist." = "lppasswd: user \"%s\" and group \"%s\" do not exist.";
"lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination \"%s\".";
+// TRANSLATORS: Amount of Material
+"material-amount" = "Amount of Material";
+// TRANSLATORS: Amount Units
+"material-amount-units" = "Amount Units";
+// TRANSLATORS: Grams
+"material-amount-units.g" = "Grams";
+// TRANSLATORS: Kilograms
+"material-amount-units.kg" = "Kilograms";
+// TRANSLATORS: Liters
+"material-amount-units.l" = "Liters";
+// TRANSLATORS: Meters
+"material-amount-units.m" = "Meters";
+// TRANSLATORS: Milliliters
+"material-amount-units.ml" = "Milliliters";
+// TRANSLATORS: Millimeters
+"material-amount-units.mm" = "Millimeters";
+// TRANSLATORS: Material Color
+"material-color" = "Material Color";
+// TRANSLATORS: Material Diameter
+"material-diameter" = "Material Diameter";
+// TRANSLATORS: Material Diameter Tolerance
+"material-diameter-tolerance" = "Material Diameter Tolerance";
+// TRANSLATORS: Material Fill Density
+"material-fill-density" = "Material Fill Density";
+// TRANSLATORS: Material Name
+"material-name" = "Material Name";
+// TRANSLATORS: Material Nozzle Diameter
+"material-nozzle-diameter" = "Material Nozzle Diameter";
+// TRANSLATORS: Use Material For
+"material-purpose" = "Use Material For";
+// TRANSLATORS: Everything
+"material-purpose.all" = "Everything";
+// TRANSLATORS: Base
+"material-purpose.base" = "Base";
+// TRANSLATORS: In-fill
+"material-purpose.in-fill" = "In-fill";
+// TRANSLATORS: Shell
+"material-purpose.shell" = "Shell";
+// TRANSLATORS: Supports
+"material-purpose.support" = "Supports";
+// TRANSLATORS: Feed Rate
+"material-rate" = "Feed Rate";
+// TRANSLATORS: Feed Rate Units
+"material-rate-units" = "Feed Rate Units";
+// TRANSLATORS: Milligrams per second
+"material-rate-units.mg_second" = "Milligrams per second";
+// TRANSLATORS: Milliliters per second
+"material-rate-units.ml_second" = "Milliliters per second";
+// TRANSLATORS: Millimeters per second
+"material-rate-units.mm_second" = "Millimeters per second";
+// TRANSLATORS: Material Retraction
+"material-retraction" = "Material Retraction";
+// TRANSLATORS: Material Shell Thickness
+"material-shell-thickness" = "Material Shell Thickness";
+// TRANSLATORS: Material Temperature
+"material-temperature" = "Material Temperature";
+// TRANSLATORS: Material Type
+"material-type" = "Material Type";
+// TRANSLATORS: ABS
+"material-type.abs" = "ABS";
+// TRANSLATORS: Carbon Fiber ABS
+"material-type.abs-carbon-fiber" = "Carbon Fiber ABS";
+// TRANSLATORS: Carbon Nanotube ABS
+"material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS";
+// TRANSLATORS: Chocolate
+"material-type.chocolate" = "Chocolate";
+// TRANSLATORS: Gold
+"material-type.gold" = "Gold";
+// TRANSLATORS: Nylon
+"material-type.nylon" = "Nylon";
+// TRANSLATORS: Pet
+"material-type.pet" = "Pet";
+// TRANSLATORS: Photopolymer
+"material-type.photopolymer" = "Photopolymer";
+// TRANSLATORS: PLA
+"material-type.pla" = "PLA";
+// TRANSLATORS: Conductive PLA
+"material-type.pla-conductive" = "Conductive PLA";
+// TRANSLATORS: Pla Dissolvable
+"material-type.pla-dissolvable" = "Pla Dissolvable";
+// TRANSLATORS: Flexible PLA
+"material-type.pla-flexible" = "Flexible PLA";
+// TRANSLATORS: Magnetic PLA
+"material-type.pla-magnetic" = "Magnetic PLA";
+// TRANSLATORS: Steel PLA
+"material-type.pla-steel" = "Steel PLA";
+// TRANSLATORS: Stone PLA
+"material-type.pla-stone" = "Stone PLA";
+// TRANSLATORS: Wood PLA
+"material-type.pla-wood" = "Wood PLA";
+// TRANSLATORS: Polycarbonate
+"material-type.polycarbonate" = "Polycarbonate";
+// TRANSLATORS: Dissolvable PVA
+"material-type.pva-dissolvable" = "Dissolvable PVA";
+// TRANSLATORS: Silver
+"material-type.silver" = "Silver";
+// TRANSLATORS: Titanium
+"material-type.titanium" = "Titanium";
+// TRANSLATORS: Wax
+"material-type.wax" = "Wax";
+// TRANSLATORS: Materials
+"materials-col" = "Materials";
+// TRANSLATORS: Media
+"media" = "Media";
+// TRANSLATORS: Back Coating of Media
+"media-back-coating" = "Back Coating of Media";
+// TRANSLATORS: Glossy
+"media-back-coating.glossy" = "Glossy";
+// TRANSLATORS: High Gloss
+"media-back-coating.high-gloss" = "High Gloss";
+// TRANSLATORS: Matte
+"media-back-coating.matte" = "Matte";
+// TRANSLATORS: None
+"media-back-coating.none" = "None";
+// TRANSLATORS: Satin
+"media-back-coating.satin" = "Satin";
+// TRANSLATORS: Semi-gloss
+"media-back-coating.semi-gloss" = "Semi-gloss";
+// TRANSLATORS: Media Bottom Margin
+"media-bottom-margin" = "Media Bottom Margin";
+// TRANSLATORS: Media
+"media-col" = "Media";
+// TRANSLATORS: Media Color
+"media-color" = "Media Color";
+// TRANSLATORS: Black
+"media-color.black" = "Black";
+// TRANSLATORS: Blue
+"media-color.blue" = "Blue";
+// TRANSLATORS: Brown
+"media-color.brown" = "Brown";
+// TRANSLATORS: Buff
+"media-color.buff" = "Buff";
+// TRANSLATORS: Clear Black
+"media-color.clear-black" = "Clear Black";
+// TRANSLATORS: Clear Blue
+"media-color.clear-blue" = "Clear Blue";
+// TRANSLATORS: Clear Brown
+"media-color.clear-brown" = "Clear Brown";
+// TRANSLATORS: Clear Buff
+"media-color.clear-buff" = "Clear Buff";
+// TRANSLATORS: Clear Cyan
+"media-color.clear-cyan" = "Clear Cyan";
+// TRANSLATORS: Clear Gold
+"media-color.clear-gold" = "Clear Gold";
+// TRANSLATORS: Clear Goldenrod
+"media-color.clear-goldenrod" = "Clear Goldenrod";
+// TRANSLATORS: Clear Gray
+"media-color.clear-gray" = "Clear Gray";
+// TRANSLATORS: Clear Green
+"media-color.clear-green" = "Clear Green";
+// TRANSLATORS: Clear Ivory
+"media-color.clear-ivory" = "Clear Ivory";
+// TRANSLATORS: Clear Magenta
+"media-color.clear-magenta" = "Clear Magenta";
+// TRANSLATORS: Clear Multi Color
+"media-color.clear-multi-color" = "Clear Multi Color";
+// TRANSLATORS: Clear Mustard
+"media-color.clear-mustard" = "Clear Mustard";
+// TRANSLATORS: Clear Orange
+"media-color.clear-orange" = "Clear Orange";
+// TRANSLATORS: Clear Pink
+"media-color.clear-pink" = "Clear Pink";
+// TRANSLATORS: Clear Red
+"media-color.clear-red" = "Clear Red";
+// TRANSLATORS: Clear Silver
+"media-color.clear-silver" = "Clear Silver";
+// TRANSLATORS: Clear Turquoise
+"media-color.clear-turquoise" = "Clear Turquoise";
+// TRANSLATORS: Clear Violet
+"media-color.clear-violet" = "Clear Violet";
+// TRANSLATORS: Clear White
+"media-color.clear-white" = "Clear White";
+// TRANSLATORS: Clear Yellow
+"media-color.clear-yellow" = "Clear Yellow";
+// TRANSLATORS: Cyan
+"media-color.cyan" = "Cyan";
+// TRANSLATORS: Dark Blue
+"media-color.dark-blue" = "Dark Blue";
+// TRANSLATORS: Dark Brown
+"media-color.dark-brown" = "Dark Brown";
+// TRANSLATORS: Dark Buff
+"media-color.dark-buff" = "Dark Buff";
+// TRANSLATORS: Dark Cyan
+"media-color.dark-cyan" = "Dark Cyan";
+// TRANSLATORS: Dark Gold
+"media-color.dark-gold" = "Dark Gold";
+// TRANSLATORS: Dark Goldenrod
+"media-color.dark-goldenrod" = "Dark Goldenrod";
+// TRANSLATORS: Dark Gray
+"media-color.dark-gray" = "Dark Gray";
+// TRANSLATORS: Dark Green
+"media-color.dark-green" = "Dark Green";
+// TRANSLATORS: Dark Ivory
+"media-color.dark-ivory" = "Dark Ivory";
+// TRANSLATORS: Dark Magenta
+"media-color.dark-magenta" = "Dark Magenta";
+// TRANSLATORS: Dark Mustard
+"media-color.dark-mustard" = "Dark Mustard";
+// TRANSLATORS: Dark Orange
+"media-color.dark-orange" = "Dark Orange";
+// TRANSLATORS: Dark Pink
+"media-color.dark-pink" = "Dark Pink";
+// TRANSLATORS: Dark Red
+"media-color.dark-red" = "Dark Red";
+// TRANSLATORS: Dark Silver
+"media-color.dark-silver" = "Dark Silver";
+// TRANSLATORS: Dark Turquoise
+"media-color.dark-turquoise" = "Dark Turquoise";
+// TRANSLATORS: Dark Violet
+"media-color.dark-violet" = "Dark Violet";
+// TRANSLATORS: Dark Yellow
+"media-color.dark-yellow" = "Dark Yellow";
+// TRANSLATORS: Gold
+"media-color.gold" = "Gold";
+// TRANSLATORS: Goldenrod
+"media-color.goldenrod" = "Goldenrod";
+// TRANSLATORS: Gray
+"media-color.gray" = "Gray";
+// TRANSLATORS: Green
+"media-color.green" = "Green";
+// TRANSLATORS: Ivory
+"media-color.ivory" = "Ivory";
+// TRANSLATORS: Light Black
+"media-color.light-black" = "Light Black";
+// TRANSLATORS: Light Blue
+"media-color.light-blue" = "Light Blue";
+// TRANSLATORS: Light Brown
+"media-color.light-brown" = "Light Brown";
+// TRANSLATORS: Light Buff
+"media-color.light-buff" = "Light Buff";
+// TRANSLATORS: Light Cyan
+"media-color.light-cyan" = "Light Cyan";
+// TRANSLATORS: Light Gold
+"media-color.light-gold" = "Light Gold";
+// TRANSLATORS: Light Goldenrod
+"media-color.light-goldenrod" = "Light Goldenrod";
+// TRANSLATORS: Light Gray
+"media-color.light-gray" = "Light Gray";
+// TRANSLATORS: Light Green
+"media-color.light-green" = "Light Green";
+// TRANSLATORS: Light Ivory
+"media-color.light-ivory" = "Light Ivory";
+// TRANSLATORS: Light Magenta
+"media-color.light-magenta" = "Light Magenta";
+// TRANSLATORS: Light Mustard
+"media-color.light-mustard" = "Light Mustard";
+// TRANSLATORS: Light Orange
+"media-color.light-orange" = "Light Orange";
+// TRANSLATORS: Light Pink
+"media-color.light-pink" = "Light Pink";
+// TRANSLATORS: Light Red
+"media-color.light-red" = "Light Red";
+// TRANSLATORS: Light Silver
+"media-color.light-silver" = "Light Silver";
+// TRANSLATORS: Light Turquoise
+"media-color.light-turquoise" = "Light Turquoise";
+// TRANSLATORS: Light Violet
+"media-color.light-violet" = "Light Violet";
+// TRANSLATORS: Light Yellow
+"media-color.light-yellow" = "Light Yellow";
+// TRANSLATORS: Magenta
+"media-color.magenta" = "Magenta";
+// TRANSLATORS: Multi-color
+"media-color.multi-color" = "Multi-color";
+// TRANSLATORS: Mustard
+"media-color.mustard" = "Mustard";
+// TRANSLATORS: No Color
+"media-color.no-color" = "No Color";
+// TRANSLATORS: Orange
+"media-color.orange" = "Orange";
+// TRANSLATORS: Pink
+"media-color.pink" = "Pink";
+// TRANSLATORS: Red
+"media-color.red" = "Red";
+// TRANSLATORS: Silver
+"media-color.silver" = "Silver";
+// TRANSLATORS: Turquoise
+"media-color.turquoise" = "Turquoise";
+// TRANSLATORS: Violet
+"media-color.violet" = "Violet";
+// TRANSLATORS: White
+"media-color.white" = "White";
+// TRANSLATORS: Yellow
+"media-color.yellow" = "Yellow";
+// TRANSLATORS: Front Coating of Media
+"media-front-coating" = "Front Coating of Media";
+// TRANSLATORS: Media Grain
+"media-grain" = "Media Grain";
+// TRANSLATORS: Cross-Feed Direction
+"media-grain.x-direction" = "Cross-Feed Direction";
+// TRANSLATORS: Feed Direction
+"media-grain.y-direction" = "Feed Direction";
+// TRANSLATORS: Media Hole Count
+"media-hole-count" = "Media Hole Count";
+// TRANSLATORS: Media Info
+"media-info" = "Media Info";
+// TRANSLATORS: Force Media
+"media-input-tray-check" = "Force Media";
+// TRANSLATORS: Media Left Margin
+"media-left-margin" = "Media Left Margin";
+// TRANSLATORS: Pre-printed Media
+"media-pre-printed" = "Pre-printed Media";
+// TRANSLATORS: Blank
+"media-pre-printed.blank" = "Blank";
+// TRANSLATORS: Letterhead
+"media-pre-printed.letter-head" = "Letterhead";
+// TRANSLATORS: Pre-printed
+"media-pre-printed.pre-printed" = "Pre-printed";
+// TRANSLATORS: Recycled Media
+"media-recycled" = "Recycled Media";
+// TRANSLATORS: None
+"media-recycled.none" = "None";
+// TRANSLATORS: Standard
+"media-recycled.standard" = "Standard";
+// TRANSLATORS: Media Right Margin
+"media-right-margin" = "Media Right Margin";
+// TRANSLATORS: Media Dimensions
+"media-size" = "Media Dimensions";
+// TRANSLATORS: Media Name
+"media-size-name" = "Media Name";
+// TRANSLATORS: Media Source
+"media-source" = "Media Source";
+// TRANSLATORS: Alternate
+"media-source.alternate" = "Alternate";
+// TRANSLATORS: Alternate Roll
+"media-source.alternate-roll" = "Alternate Roll";
+// TRANSLATORS: Automatic
+"media-source.auto" = "Automatic";
+// TRANSLATORS: Bottom
+"media-source.bottom" = "Bottom";
+// TRANSLATORS: By-pass Tray
+"media-source.by-pass-tray" = "By-pass Tray";
+// TRANSLATORS: Center
+"media-source.center" = "Center";
+// TRANSLATORS: Disc
+"media-source.disc" = "Disc";
+// TRANSLATORS: Envelope
+"media-source.envelope" = "Envelope";
+// TRANSLATORS: Hagaki
+"media-source.hagaki" = "Hagaki";
+// TRANSLATORS: Large Capacity
+"media-source.large-capacity" = "Large Capacity";
+// TRANSLATORS: Left
+"media-source.left" = "Left";
+// TRANSLATORS: Main
+"media-source.main" = "Main";
+// TRANSLATORS: Main Roll
+"media-source.main-roll" = "Main Roll";
+// TRANSLATORS: Manual
+"media-source.manual" = "Manual";
+// TRANSLATORS: Middle
+"media-source.middle" = "Middle";
+// TRANSLATORS: Photo
+"media-source.photo" = "Photo";
+// TRANSLATORS: Rear
+"media-source.rear" = "Rear";
+// TRANSLATORS: Right
+"media-source.right" = "Right";
+// TRANSLATORS: Roll 1
+"media-source.roll-1" = "Roll 1";
+// TRANSLATORS: Roll 10
+"media-source.roll-10" = "Roll 10";
+// TRANSLATORS: Roll 2
+"media-source.roll-2" = "Roll 2";
+// TRANSLATORS: Roll 3
+"media-source.roll-3" = "Roll 3";
+// TRANSLATORS: Roll 4
+"media-source.roll-4" = "Roll 4";
+// TRANSLATORS: Roll 5
+"media-source.roll-5" = "Roll 5";
+// TRANSLATORS: Roll 6
+"media-source.roll-6" = "Roll 6";
+// TRANSLATORS: Roll 7
+"media-source.roll-7" = "Roll 7";
+// TRANSLATORS: Roll 8
+"media-source.roll-8" = "Roll 8";
+// TRANSLATORS: Roll 9
+"media-source.roll-9" = "Roll 9";
+// TRANSLATORS: Side
+"media-source.side" = "Side";
+// TRANSLATORS: Top
+"media-source.top" = "Top";
+// TRANSLATORS: Tray 1
+"media-source.tray-1" = "Tray 1";
+// TRANSLATORS: Tray 10
+"media-source.tray-10" = "Tray 10";
+// TRANSLATORS: Tray 11
+"media-source.tray-11" = "Tray 11";
+// TRANSLATORS: Tray 12
+"media-source.tray-12" = "Tray 12";
+// TRANSLATORS: Tray 13
+"media-source.tray-13" = "Tray 13";
+// TRANSLATORS: Tray 14
+"media-source.tray-14" = "Tray 14";
+// TRANSLATORS: Tray 15
+"media-source.tray-15" = "Tray 15";
+// TRANSLATORS: Tray 16
+"media-source.tray-16" = "Tray 16";
+// TRANSLATORS: Tray 17
+"media-source.tray-17" = "Tray 17";
+// TRANSLATORS: Tray 18
+"media-source.tray-18" = "Tray 18";
+// TRANSLATORS: Tray 19
+"media-source.tray-19" = "Tray 19";
+// TRANSLATORS: Tray 2
+"media-source.tray-2" = "Tray 2";
+// TRANSLATORS: Tray 20
+"media-source.tray-20" = "Tray 20";
+// TRANSLATORS: Tray 3
+"media-source.tray-3" = "Tray 3";
+// TRANSLATORS: Tray 4
+"media-source.tray-4" = "Tray 4";
+// TRANSLATORS: Tray 5
+"media-source.tray-5" = "Tray 5";
+// TRANSLATORS: Tray 6
+"media-source.tray-6" = "Tray 6";
+// TRANSLATORS: Tray 7
+"media-source.tray-7" = "Tray 7";
+// TRANSLATORS: Tray 8
+"media-source.tray-8" = "Tray 8";
+// TRANSLATORS: Tray 9
+"media-source.tray-9" = "Tray 9";
+// TRANSLATORS: Media Thickness
+"media-thickness" = "Media Thickness";
+// TRANSLATORS: Media Tooth (Texture)
+"media-tooth" = "Media Tooth (Texture)";
+// TRANSLATORS: Antique
+"media-tooth.antique" = "Antique";
+// TRANSLATORS: Extra Smooth
+"media-tooth.calendared" = "Extra Smooth";
+// TRANSLATORS: Coarse
+"media-tooth.coarse" = "Coarse";
+// TRANSLATORS: Fine
+"media-tooth.fine" = "Fine";
+// TRANSLATORS: Linen
+"media-tooth.linen" = "Linen";
+// TRANSLATORS: Medium
+"media-tooth.medium" = "Medium";
+// TRANSLATORS: Smooth
+"media-tooth.smooth" = "Smooth";
+// TRANSLATORS: Stipple
+"media-tooth.stipple" = "Stipple";
+// TRANSLATORS: Rough
+"media-tooth.uncalendared" = "Rough";
+// TRANSLATORS: Vellum
+"media-tooth.vellum" = "Vellum";
+// TRANSLATORS: Media Top Margin
+"media-top-margin" = "Media Top Margin";
+// TRANSLATORS: Media Type
+"media-type" = "Media Type";
+// TRANSLATORS: Aluminum
+"media-type.aluminum" = "Aluminum";
+// TRANSLATORS: Automatic
+"media-type.auto" = "Automatic";
+// TRANSLATORS: Back Print Film
+"media-type.back-print-film" = "Back Print Film";
+// TRANSLATORS: Cardboard
+"media-type.cardboard" = "Cardboard";
+// TRANSLATORS: Cardstock
+"media-type.cardstock" = "Cardstock";
+// TRANSLATORS: CD
+"media-type.cd" = "CD";
+// TRANSLATORS: Continuous
+"media-type.continuous" = "Continuous";
+// TRANSLATORS: Continuous Long
+"media-type.continuous-long" = "Continuous Long";
+// TRANSLATORS: Continuous Short
+"media-type.continuous-short" = "Continuous Short";
+// TRANSLATORS: Corrugated Board
+"media-type.corrugated-board" = "Corrugated Board";
+// TRANSLATORS: Optical Disc
+"media-type.disc" = "Optical Disc";
+// TRANSLATORS: Glossy Optical Disc
+"media-type.disc-glossy" = "Glossy Optical Disc";
+// TRANSLATORS: High Gloss Optical Disc
+"media-type.disc-high-gloss" = "High Gloss Optical Disc";
+// TRANSLATORS: Matte Optical Disc
+"media-type.disc-matte" = "Matte Optical Disc";
+// TRANSLATORS: Satin Optical Disc
+"media-type.disc-satin" = "Satin Optical Disc";
+// TRANSLATORS: Semi-Gloss Optical Disc
+"media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc";
+// TRANSLATORS: Double Wall
+"media-type.double-wall" = "Double Wall";
+// TRANSLATORS: Dry Film
+"media-type.dry-film" = "Dry Film";
+// TRANSLATORS: DVD
+"media-type.dvd" = "DVD";
+// TRANSLATORS: Embossing Foil
+"media-type.embossing-foil" = "Embossing Foil";
+// TRANSLATORS: End Board
+"media-type.end-board" = "End Board";
+// TRANSLATORS: Envelope
+"media-type.envelope" = "Envelope";
+// TRANSLATORS: Archival Envelope
+"media-type.envelope-archival" = "Archival Envelope";
+// TRANSLATORS: Bond Envelope
+"media-type.envelope-bond" = "Bond Envelope";
+// TRANSLATORS: Coated Envelope
+"media-type.envelope-coated" = "Coated Envelope";
+// TRANSLATORS: Cotton Envelope
+"media-type.envelope-cotton" = "Cotton Envelope";
+// TRANSLATORS: Fine Envelope
+"media-type.envelope-fine" = "Fine Envelope";
+// TRANSLATORS: Heavyweight Envelope
+"media-type.envelope-heavyweight" = "Heavyweight Envelope";
+// TRANSLATORS: Inkjet Envelope
+"media-type.envelope-inkjet" = "Inkjet Envelope";
+// TRANSLATORS: Lightweight Envelope
+"media-type.envelope-lightweight" = "Lightweight Envelope";
+// TRANSLATORS: Plain Envelope
+"media-type.envelope-plain" = "Plain Envelope";
+// TRANSLATORS: Preprinted Envelope
+"media-type.envelope-preprinted" = "Preprinted Envelope";
+// TRANSLATORS: Windowed Envelope
+"media-type.envelope-window" = "Windowed Envelope";
+// TRANSLATORS: Fabric
+"media-type.fabric" = "Fabric";
+// TRANSLATORS: Archival Fabric
+"media-type.fabric-archival" = "Archival Fabric";
+// TRANSLATORS: Glossy Fabric
+"media-type.fabric-glossy" = "Glossy Fabric";
+// TRANSLATORS: High Gloss Fabric
+"media-type.fabric-high-gloss" = "High Gloss Fabric";
+// TRANSLATORS: Matte Fabric
+"media-type.fabric-matte" = "Matte Fabric";
+// TRANSLATORS: Semi-Gloss Fabric
+"media-type.fabric-semi-gloss" = "Semi-Gloss Fabric";
+// TRANSLATORS: Waterproof Fabric
+"media-type.fabric-waterproof" = "Waterproof Fabric";
+// TRANSLATORS: Film
+"media-type.film" = "Film";
+// TRANSLATORS: Flexo Base
+"media-type.flexo-base" = "Flexo Base";
+// TRANSLATORS: Flexo Photo Polymer
+"media-type.flexo-photo-polymer" = "Flexo Photo Polymer";
+// TRANSLATORS: Flute
+"media-type.flute" = "Flute";
+// TRANSLATORS: Foil
+"media-type.foil" = "Foil";
+// TRANSLATORS: Full Cut Tabs
+"media-type.full-cut-tabs" = "Full Cut Tabs";
+// TRANSLATORS: Glass
+"media-type.glass" = "Glass";
+// TRANSLATORS: Glass Colored
+"media-type.glass-colored" = "Glass Colored";
+// TRANSLATORS: Glass Opaque
+"media-type.glass-opaque" = "Glass Opaque";
+// TRANSLATORS: Glass Surfaced
+"media-type.glass-surfaced" = "Glass Surfaced";
+// TRANSLATORS: Glass Textured
+"media-type.glass-textured" = "Glass Textured";
+// TRANSLATORS: Gravure Cylinder
+"media-type.gravure-cylinder" = "Gravure Cylinder";
+// TRANSLATORS: Image Setter Paper
+"media-type.image-setter-paper" = "Image Setter Paper";
+// TRANSLATORS: Imaging Cylinder
+"media-type.imaging-cylinder" = "Imaging Cylinder";
+// TRANSLATORS: Labels
+"media-type.labels" = "Labels";
+// TRANSLATORS: Colored Labels
+"media-type.labels-colored" = "Colored Labels";
+// TRANSLATORS: Glossy Labels
+"media-type.labels-glossy" = "Glossy Labels";
+// TRANSLATORS: High Gloss Labels
+"media-type.labels-high-gloss" = "High Gloss Labels";
+// TRANSLATORS: Inkjet Labels
+"media-type.labels-inkjet" = "Inkjet Labels";
+// TRANSLATORS: Matte Labels
+"media-type.labels-matte" = "Matte Labels";
+// TRANSLATORS: Permanent Labels
+"media-type.labels-permanent" = "Permanent Labels";
+// TRANSLATORS: Satin Labels
+"media-type.labels-satin" = "Satin Labels";
+// TRANSLATORS: Security Labels
+"media-type.labels-security" = "Security Labels";
+// TRANSLATORS: Semi-Gloss Labels
+"media-type.labels-semi-gloss" = "Semi-Gloss Labels";
+// TRANSLATORS: Laminating Foil
+"media-type.laminating-foil" = "Laminating Foil";
+// TRANSLATORS: Letterhead
+"media-type.letterhead" = "Letterhead";
+// TRANSLATORS: Metal
+"media-type.metal" = "Metal";
+// TRANSLATORS: Metal Glossy
+"media-type.metal-glossy" = "Metal Glossy";
+// TRANSLATORS: Metal High Gloss
+"media-type.metal-high-gloss" = "Metal High Gloss";
+// TRANSLATORS: Metal Matte
+"media-type.metal-matte" = "Metal Matte";
+// TRANSLATORS: Metal Satin
+"media-type.metal-satin" = "Metal Satin";
+// TRANSLATORS: Metal Semi Gloss
+"media-type.metal-semi-gloss" = "Metal Semi Gloss";
+// TRANSLATORS: Mounting Tape
+"media-type.mounting-tape" = "Mounting Tape";
+// TRANSLATORS: Multi Layer
+"media-type.multi-layer" = "Multi Layer";
+// TRANSLATORS: Multi Part Form
+"media-type.multi-part-form" = "Multi Part Form";
+// TRANSLATORS: Other
+"media-type.other" = "Other";
+// TRANSLATORS: Paper
+"media-type.paper" = "Paper";
+// TRANSLATORS: Photo Paper
+"media-type.photographic" = "Photo Paper";
+// TRANSLATORS: Photographic Archival
+"media-type.photographic-archival" = "Photographic Archival";
+// TRANSLATORS: Photo Film
+"media-type.photographic-film" = "Photo Film";
+// TRANSLATORS: Glossy Photo Paper
+"media-type.photographic-glossy" = "Glossy Photo Paper";
+// TRANSLATORS: High Gloss Photo Paper
+"media-type.photographic-high-gloss" = "High Gloss Photo Paper";
+// TRANSLATORS: Matte Photo Paper
+"media-type.photographic-matte" = "Matte Photo Paper";
+// TRANSLATORS: Satin Photo Paper
+"media-type.photographic-satin" = "Satin Photo Paper";
+// TRANSLATORS: Semi-Gloss Photo Paper
+"media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper";
+// TRANSLATORS: Plastic
+"media-type.plastic" = "Plastic";
+// TRANSLATORS: Plastic Archival
+"media-type.plastic-archival" = "Plastic Archival";
+// TRANSLATORS: Plastic Colored
+"media-type.plastic-colored" = "Plastic Colored";
+// TRANSLATORS: Plastic Glossy
+"media-type.plastic-glossy" = "Plastic Glossy";
+// TRANSLATORS: Plastic High Gloss
+"media-type.plastic-high-gloss" = "Plastic High Gloss";
+// TRANSLATORS: Plastic Matte
+"media-type.plastic-matte" = "Plastic Matte";
+// TRANSLATORS: Plastic Satin
+"media-type.plastic-satin" = "Plastic Satin";
+// TRANSLATORS: Plastic Semi Gloss
+"media-type.plastic-semi-gloss" = "Plastic Semi Gloss";
+// TRANSLATORS: Plate
+"media-type.plate" = "Plate";
+// TRANSLATORS: Polyester
+"media-type.polyester" = "Polyester";
+// TRANSLATORS: Pre Cut Tabs
+"media-type.pre-cut-tabs" = "Pre Cut Tabs";
+// TRANSLATORS: Roll
+"media-type.roll" = "Roll";
+// TRANSLATORS: Screen
+"media-type.screen" = "Screen";
+// TRANSLATORS: Screen Paged
+"media-type.screen-paged" = "Screen Paged";
+// TRANSLATORS: Self Adhesive
+"media-type.self-adhesive" = "Self Adhesive";
+// TRANSLATORS: Self Adhesive Film
+"media-type.self-adhesive-film" = "Self Adhesive Film";
+// TRANSLATORS: Shrink Foil
+"media-type.shrink-foil" = "Shrink Foil";
+// TRANSLATORS: Single Face
+"media-type.single-face" = "Single Face";
+// TRANSLATORS: Single Wall
+"media-type.single-wall" = "Single Wall";
+// TRANSLATORS: Sleeve
+"media-type.sleeve" = "Sleeve";
+// TRANSLATORS: Stationery
+"media-type.stationery" = "Stationery";
+// TRANSLATORS: Stationery Archival
+"media-type.stationery-archival" = "Stationery Archival";
+// TRANSLATORS: Coated Paper
+"media-type.stationery-coated" = "Coated Paper";
+// TRANSLATORS: Stationery Cotton
+"media-type.stationery-cotton" = "Stationery Cotton";
+// TRANSLATORS: Vellum Paper
+"media-type.stationery-fine" = "Vellum Paper";
+// TRANSLATORS: Heavyweight Paper
+"media-type.stationery-heavyweight" = "Heavyweight Paper";
+// TRANSLATORS: Stationery Heavyweight Coated
+"media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated";
+// TRANSLATORS: Stationery Inkjet Paper
+"media-type.stationery-inkjet" = "Stationery Inkjet Paper";
+// TRANSLATORS: Letterhead
+"media-type.stationery-letterhead" = "Letterhead";
+// TRANSLATORS: Lightweight Paper
+"media-type.stationery-lightweight" = "Lightweight Paper";
+// TRANSLATORS: Preprinted Paper
+"media-type.stationery-preprinted" = "Preprinted Paper";
+// TRANSLATORS: Punched Paper
+"media-type.stationery-prepunched" = "Punched Paper";
+// TRANSLATORS: Tab Stock
+"media-type.tab-stock" = "Tab Stock";
+// TRANSLATORS: Tractor
+"media-type.tractor" = "Tractor";
+// TRANSLATORS: Transfer
+"media-type.transfer" = "Transfer";
+// TRANSLATORS: Transparency
+"media-type.transparency" = "Transparency";
+// TRANSLATORS: Triple Wall
+"media-type.triple-wall" = "Triple Wall";
+// TRANSLATORS: Wet Film
+"media-type.wet-film" = "Wet Film";
+// TRANSLATORS: Media Weight (grams per m²)
+"media-weight-metric" = "Media Weight (grams per m²)";
+// TRANSLATORS: 28 x 40″
+"media.asme_f_28x40in" = "28 x 40″";
+// TRANSLATORS: A4 or US Letter
+"media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter";
+// TRANSLATORS: 2a0
+"media.iso_2a0_1189x1682mm" = "2a0";
+// TRANSLATORS: A0
+"media.iso_a0_841x1189mm" = "A0";
+// TRANSLATORS: A0x3
+"media.iso_a0x3_1189x2523mm" = "A0x3";
+// TRANSLATORS: A10
+"media.iso_a10_26x37mm" = "A10";
+// TRANSLATORS: A1
+"media.iso_a1_594x841mm" = "A1";
+// TRANSLATORS: A1x3
+"media.iso_a1x3_841x1783mm" = "A1x3";
+// TRANSLATORS: A1x4
+"media.iso_a1x4_841x2378mm" = "A1x4";
+// TRANSLATORS: A2
+"media.iso_a2_420x594mm" = "A2";
+// TRANSLATORS: A2x3
+"media.iso_a2x3_594x1261mm" = "A2x3";
+// TRANSLATORS: A2x4
+"media.iso_a2x4_594x1682mm" = "A2x4";
+// TRANSLATORS: A2x5
+"media.iso_a2x5_594x2102mm" = "A2x5";
+// TRANSLATORS: A3 (Extra)
+"media.iso_a3-extra_322x445mm" = "A3 (Extra)";
+// TRANSLATORS: A3
+"media.iso_a3_297x420mm" = "A3";
+// TRANSLATORS: A3x3
+"media.iso_a3x3_420x891mm" = "A3x3";
+// TRANSLATORS: A3x4
+"media.iso_a3x4_420x1189mm" = "A3x4";
+// TRANSLATORS: A3x5
+"media.iso_a3x5_420x1486mm" = "A3x5";
+// TRANSLATORS: A3x6
+"media.iso_a3x6_420x1783mm" = "A3x6";
+// TRANSLATORS: A3x7
+"media.iso_a3x7_420x2080mm" = "A3x7";
+// TRANSLATORS: A4 (Extra)
+"media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)";
+// TRANSLATORS: A4 (Tab)
+"media.iso_a4-tab_225x297mm" = "A4 (Tab)";
+// TRANSLATORS: A4
+"media.iso_a4_210x297mm" = "A4";
+// TRANSLATORS: A4x3
+"media.iso_a4x3_297x630mm" = "A4x3";
+// TRANSLATORS: A4x4
+"media.iso_a4x4_297x841mm" = "A4x4";
+// TRANSLATORS: A4x5
+"media.iso_a4x5_297x1051mm" = "A4x5";
+// TRANSLATORS: A4x6
+"media.iso_a4x6_297x1261mm" = "A4x6";
+// TRANSLATORS: A4x7
+"media.iso_a4x7_297x1471mm" = "A4x7";
+// TRANSLATORS: A4x8
+"media.iso_a4x8_297x1682mm" = "A4x8";
+// TRANSLATORS: A4x9
+"media.iso_a4x9_297x1892mm" = "A4x9";
+// TRANSLATORS: A5 (Extra)
+"media.iso_a5-extra_174x235mm" = "A5 (Extra)";
+// TRANSLATORS: A5
+"media.iso_a5_148x210mm" = "A5";
+// TRANSLATORS: A6
+"media.iso_a6_105x148mm" = "A6";
+// TRANSLATORS: A7
+"media.iso_a7_74x105mm" = "A7";
+// TRANSLATORS: A8
+"media.iso_a8_52x74mm" = "A8";
+// TRANSLATORS: A9
+"media.iso_a9_37x52mm" = "A9";
+// TRANSLATORS: B0
+"media.iso_b0_1000x1414mm" = "B0";
+// TRANSLATORS: B10
+"media.iso_b10_31x44mm" = "B10";
+// TRANSLATORS: B1
+"media.iso_b1_707x1000mm" = "B1";
+// TRANSLATORS: B2
+"media.iso_b2_500x707mm" = "B2";
+// TRANSLATORS: B3
+"media.iso_b3_353x500mm" = "B3";
+// TRANSLATORS: B4
+"media.iso_b4_250x353mm" = "B4";
+// TRANSLATORS: B5 (Extra)
+"media.iso_b5-extra_201x276mm" = "B5 (Extra)";
+// TRANSLATORS: Envelope B5
+"media.iso_b5_176x250mm" = "Envelope B5";
+// TRANSLATORS: B6
+"media.iso_b6_125x176mm" = "B6";
+// TRANSLATORS: Envelope B6/C4
+"media.iso_b6c4_125x324mm" = "Envelope B6/C4";
+// TRANSLATORS: B7
+"media.iso_b7_88x125mm" = "B7";
+// TRANSLATORS: B8
+"media.iso_b8_62x88mm" = "B8";
+// TRANSLATORS: B9
+"media.iso_b9_44x62mm" = "B9";
+// TRANSLATORS: CEnvelope 0
+"media.iso_c0_917x1297mm" = "CEnvelope 0";
+// TRANSLATORS: CEnvelope 10
+"media.iso_c10_28x40mm" = "CEnvelope 10";
+// TRANSLATORS: CEnvelope 1
+"media.iso_c1_648x917mm" = "CEnvelope 1";
+// TRANSLATORS: CEnvelope 2
+"media.iso_c2_458x648mm" = "CEnvelope 2";
+// TRANSLATORS: CEnvelope 3
+"media.iso_c3_324x458mm" = "CEnvelope 3";
+// TRANSLATORS: CEnvelope 4
+"media.iso_c4_229x324mm" = "CEnvelope 4";
+// TRANSLATORS: CEnvelope 5
+"media.iso_c5_162x229mm" = "CEnvelope 5";
+// TRANSLATORS: CEnvelope 6
+"media.iso_c6_114x162mm" = "CEnvelope 6";
+// TRANSLATORS: CEnvelope 6c5
+"media.iso_c6c5_114x229mm" = "CEnvelope 6c5";
+// TRANSLATORS: CEnvelope 7
+"media.iso_c7_81x114mm" = "CEnvelope 7";
+// TRANSLATORS: CEnvelope 7c6
+"media.iso_c7c6_81x162mm" = "CEnvelope 7c6";
+// TRANSLATORS: CEnvelope 8
+"media.iso_c8_57x81mm" = "CEnvelope 8";
+// TRANSLATORS: CEnvelope 9
+"media.iso_c9_40x57mm" = "CEnvelope 9";
+// TRANSLATORS: Envelope DL
+"media.iso_dl_110x220mm" = "Envelope DL";
+// TRANSLATORS: Id-1
+"media.iso_id-1_53.98x85.6mm" = "Id-1";
+// TRANSLATORS: Id-3
+"media.iso_id-3_88x125mm" = "Id-3";
+// TRANSLATORS: ISO RA0
+"media.iso_ra0_860x1220mm" = "ISO RA0";
+// TRANSLATORS: ISO RA1
+"media.iso_ra1_610x860mm" = "ISO RA1";
+// TRANSLATORS: ISO RA2
+"media.iso_ra2_430x610mm" = "ISO RA2";
+// TRANSLATORS: ISO RA3
+"media.iso_ra3_305x430mm" = "ISO RA3";
+// TRANSLATORS: ISO RA4
+"media.iso_ra4_215x305mm" = "ISO RA4";
+// TRANSLATORS: ISO SRA0
+"media.iso_sra0_900x1280mm" = "ISO SRA0";
+// TRANSLATORS: ISO SRA1
+"media.iso_sra1_640x900mm" = "ISO SRA1";
+// TRANSLATORS: ISO SRA2
+"media.iso_sra2_450x640mm" = "ISO SRA2";
+// TRANSLATORS: ISO SRA3
+"media.iso_sra3_320x450mm" = "ISO SRA3";
+// TRANSLATORS: ISO SRA4
+"media.iso_sra4_225x320mm" = "ISO SRA4";
+// TRANSLATORS: JIS B0
+"media.jis_b0_1030x1456mm" = "JIS B0";
+// TRANSLATORS: JIS B10
+"media.jis_b10_32x45mm" = "JIS B10";
+// TRANSLATORS: JIS B1
+"media.jis_b1_728x1030mm" = "JIS B1";
+// TRANSLATORS: JIS B2
+"media.jis_b2_515x728mm" = "JIS B2";
+// TRANSLATORS: JIS B3
+"media.jis_b3_364x515mm" = "JIS B3";
+// TRANSLATORS: JIS B4
+"media.jis_b4_257x364mm" = "JIS B4";
+// TRANSLATORS: JIS B5
+"media.jis_b5_182x257mm" = "JIS B5";
+// TRANSLATORS: JIS B6
+"media.jis_b6_128x182mm" = "JIS B6";
+// TRANSLATORS: JIS B7
+"media.jis_b7_91x128mm" = "JIS B7";
+// TRANSLATORS: JIS B8
+"media.jis_b8_64x91mm" = "JIS B8";
+// TRANSLATORS: JIS B9
+"media.jis_b9_45x64mm" = "JIS B9";
+// TRANSLATORS: JIS Executive
+"media.jis_exec_216x330mm" = "JIS Executive";
+// TRANSLATORS: Envelope Chou 2
+"media.jpn_chou2_111.1x146mm" = "Envelope Chou 2";
+// TRANSLATORS: Envelope Chou 3
+"media.jpn_chou3_120x235mm" = "Envelope Chou 3";
+// TRANSLATORS: Envelope Chou 40
+"media.jpn_chou40_90x225mm" = "media.jpn_chou40_90x225mm";
+// TRANSLATORS: Envelope Chou 4
+"media.jpn_chou4_90x205mm" = "Envelope Chou 4";
+// TRANSLATORS: Hagaki
+"media.jpn_hagaki_100x148mm" = "Hagaki";
+// TRANSLATORS: Envelope Kahu
+"media.jpn_kahu_240x322.1mm" = "Envelope Kahu";
+// TRANSLATORS: 270 x 382mm
+"media.jpn_kaku1_270x382mm" = "270 x 382mm";
+// TRANSLATORS: Envelope Kahu 2
+"media.jpn_kaku2_240x332mm" = "Envelope Kahu 2";
+// TRANSLATORS: 216 x 277mm
+"media.jpn_kaku3_216x277mm" = "216 x 277mm";
+// TRANSLATORS: 197 x 267mm
+"media.jpn_kaku4_197x267mm" = "197 x 267mm";
+// TRANSLATORS: 190 x 240mm
+"media.jpn_kaku5_190x240mm" = "190 x 240mm";
+// TRANSLATORS: 142 x 205mm
+"media.jpn_kaku7_142x205mm" = "142 x 205mm";
+// TRANSLATORS: 119 x 197mm
+"media.jpn_kaku8_119x197mm" = "119 x 197mm";
+// TRANSLATORS: Oufuku Reply Postcard
+"media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard";
+// TRANSLATORS: Envelope You 4
+"media.jpn_you4_105x235mm" = "Envelope You 4";
+// TRANSLATORS: 10 x 11″
+"media.na_10x11_10x11in" = "10 x 11″";
+// TRANSLATORS: 10 x 13″
+"media.na_10x13_10x13in" = "10 x 13″";
+// TRANSLATORS: 10 x 14″
+"media.na_10x14_10x14in" = "10 x 14″";
+// TRANSLATORS: 10 x 15″
+"media.na_10x15_10x15in" = "10 x 15″";
+// TRANSLATORS: 11 x 12″
+"media.na_11x12_11x12in" = "11 x 12″";
+// TRANSLATORS: 11 x 15″
+"media.na_11x15_11x15in" = "11 x 15″";
+// TRANSLATORS: 12 x 19″
+"media.na_12x19_12x19in" = "12 x 19″";
+// TRANSLATORS: 5 x 7″
+"media.na_5x7_5x7in" = "5 x 7″";
+// TRANSLATORS: 6 x 9″
+"media.na_6x9_6x9in" = "6 x 9″";
+// TRANSLATORS: 7 x 9″
+"media.na_7x9_7x9in" = "7 x 9″";
+// TRANSLATORS: 9 x 11″
+"media.na_9x11_9x11in" = "9 x 11″";
+// TRANSLATORS: Envelope A2
+"media.na_a2_4.375x5.75in" = "Envelope A2";
+// TRANSLATORS: 9 x 12″
+"media.na_arch-a_9x12in" = "9 x 12″";
+// TRANSLATORS: 12 x 18″
+"media.na_arch-b_12x18in" = "12 x 18″";
+// TRANSLATORS: 18 x 24″
+"media.na_arch-c_18x24in" = "18 x 24″";
+// TRANSLATORS: 24 x 36″
+"media.na_arch-d_24x36in" = "24 x 36″";
+// TRANSLATORS: 26 x 38″
+"media.na_arch-e2_26x38in" = "26 x 38″";
+// TRANSLATORS: 27 x 39″
+"media.na_arch-e3_27x39in" = "27 x 39″";
+// TRANSLATORS: 36 x 48″
+"media.na_arch-e_36x48in" = "36 x 48″";
+// TRANSLATORS: 12 x 19.17″
+"media.na_b-plus_12x19.17in" = "12 x 19.17″";
+// TRANSLATORS: Envelope C5
+"media.na_c5_6.5x9.5in" = "Envelope C5";
+// TRANSLATORS: 17 x 22″
+"media.na_c_17x22in" = "17 x 22″";
+// TRANSLATORS: 22 x 34″
+"media.na_d_22x34in" = "22 x 34″";
+// TRANSLATORS: 34 x 44″
+"media.na_e_34x44in" = "34 x 44″";
+// TRANSLATORS: 11 x 14″
+"media.na_edp_11x14in" = "11 x 14″";
+// TRANSLATORS: 12 x 14″
+"media.na_eur-edp_12x14in" = "12 x 14″";
+// TRANSLATORS: Executive
+"media.na_executive_7.25x10.5in" = "Executive";
+// TRANSLATORS: 44 x 68″
+"media.na_f_44x68in" = "44 x 68″";
+// TRANSLATORS: European Fanfold
+"media.na_fanfold-eur_8.5x12in" = "European Fanfold";
+// TRANSLATORS: US Fanfold
+"media.na_fanfold-us_11x14.875in" = "US Fanfold";
+// TRANSLATORS: Foolscap
+"media.na_foolscap_8.5x13in" = "Foolscap";
+// TRANSLATORS: 8 x 13″
+"media.na_govt-legal_8x13in" = "8 x 13″";
+// TRANSLATORS: 8 x 10″
+"media.na_govt-letter_8x10in" = "8 x 10″";
+// TRANSLATORS: 3 x 5″
+"media.na_index-3x5_3x5in" = "3 x 5″";
+// TRANSLATORS: 6 x 8″
+"media.na_index-4x6-ext_6x8in" = "6 x 8″";
+// TRANSLATORS: 4 x 6″
+"media.na_index-4x6_4x6in" = "4 x 6″";
+// TRANSLATORS: 5 x 8″
+"media.na_index-5x8_5x8in" = "5 x 8″";
+// TRANSLATORS: Statement
+"media.na_invoice_5.5x8.5in" = "Statement";
+// TRANSLATORS: 11 x 17″
+"media.na_ledger_11x17in" = "11 x 17″";
+// TRANSLATORS: US Legal (Extra)
+"media.na_legal-extra_9.5x15in" = "US Legal (Extra)";
+// TRANSLATORS: US Legal
+"media.na_legal_8.5x14in" = "US Legal";
+// TRANSLATORS: US Letter (Extra)
+"media.na_letter-extra_9.5x12in" = "US Letter (Extra)";
+// TRANSLATORS: US Letter (Plus)
+"media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)";
+// TRANSLATORS: US Letter
+"media.na_letter_8.5x11in" = "US Letter";
+// TRANSLATORS: Envelope Monarch
+"media.na_monarch_3.875x7.5in" = "Envelope Monarch";
+// TRANSLATORS: Envelope #10
+"media.na_number-10_4.125x9.5in" = "Envelope #10";
+// TRANSLATORS: Envelope #11
+"media.na_number-11_4.5x10.375in" = "Envelope #11";
+// TRANSLATORS: Envelope #12
+"media.na_number-12_4.75x11in" = "Envelope #12";
+// TRANSLATORS: Envelope #14
+"media.na_number-14_5x11.5in" = "Envelope #14";
+// TRANSLATORS: Envelope #9
+"media.na_number-9_3.875x8.875in" = "Envelope #9";
+// TRANSLATORS: 8.5 x 13.4″
+"media.na_oficio_8.5x13.4in" = "8.5 x 13.4″";
+// TRANSLATORS: Envelope Personal
+"media.na_personal_3.625x6.5in" = "Envelope Personal";
+// TRANSLATORS: Quarto
+"media.na_quarto_8.5x10.83in" = "Quarto";
+// TRANSLATORS: 8.94 x 14″
+"media.na_super-a_8.94x14in" = "8.94 x 14″";
+// TRANSLATORS: 13 x 19″
+"media.na_super-b_13x19in" = "13 x 19″";
+// TRANSLATORS: 30 x 42″
+"media.na_wide-format_30x42in" = "30 x 42″";
+// TRANSLATORS: 12 x 16″
+"media.oe_12x16_12x16in" = "12 x 16″";
+// TRANSLATORS: 14 x 17″
+"media.oe_14x17_14x17in" = "14 x 17″";
+// TRANSLATORS: 18 x 22″
+"media.oe_18x22_18x22in" = "18 x 22″";
+// TRANSLATORS: 17 x 24″
+"media.oe_a2plus_17x24in" = "17 x 24″";
+// TRANSLATORS: 2 x 3.5″
+"media.oe_business-card_2x3.5in" = "2 x 3.5″";
+// TRANSLATORS: 10 x 12″
+"media.oe_photo-10r_10x12in" = "10 x 12″";
+// TRANSLATORS: 20 x 24″
+"media.oe_photo-20r_20x24in" = "20 x 24″";
+// TRANSLATORS: 3.5 x 5″
+"media.oe_photo-l_3.5x5in" = "3.5 x 5″";
+// TRANSLATORS: 10 x 15″
+"media.oe_photo-s10r_10x15in" = "10 x 15″";
+// TRANSLATORS: 4 x 4″
+"media.oe_square-photo_4x4in" = "4 x 4″";
+// TRANSLATORS: 5 x 5″
+"media.oe_square-photo_5x5in" = "5 x 5″";
+// TRANSLATORS: 184 x 260mm
+"media.om_16k_184x260mm" = "184 x 260mm";
+// TRANSLATORS: 195 x 270mm
+"media.om_16k_195x270mm" = "195 x 270mm";
+// TRANSLATORS: 55 x 85mm
+"media.om_business-card_55x85mm" = "55 x 85mm";
+// TRANSLATORS: 55 x 91mm
+"media.om_business-card_55x91mm" = "55 x 91mm";
+// TRANSLATORS: 54 x 86mm
+"media.om_card_54x86mm" = "54 x 86mm";
+// TRANSLATORS: 275 x 395mm
+"media.om_dai-pa-kai_275x395mm" = "275 x 395mm";
+// TRANSLATORS: 89 x 119mm
+"media.om_dsc-photo_89x119mm" = "89 x 119mm";
+// TRANSLATORS: Folio
+"media.om_folio-sp_215x315mm" = "Folio";
+// TRANSLATORS: Folio (Special)
+"media.om_folio_210x330mm" = "Folio (Special)";
+// TRANSLATORS: Envelope Invitation
+"media.om_invite_220x220mm" = "Envelope Invitation";
+// TRANSLATORS: Envelope Italian
+"media.om_italian_110x230mm" = "Envelope Italian";
+// TRANSLATORS: 198 x 275mm
+"media.om_juuro-ku-kai_198x275mm" = "198 x 275mm";
+// TRANSLATORS: 200 x 300
+"media.om_large-photo_200x300" = "200 x 300";
+// TRANSLATORS: 130 x 180mm
+"media.om_medium-photo_130x180mm" = "130 x 180mm";
+// TRANSLATORS: 267 x 389mm
+"media.om_pa-kai_267x389mm" = "267 x 389mm";
+// TRANSLATORS: Envelope Postfix
+"media.om_postfix_114x229mm" = "Envelope Postfix";
+// TRANSLATORS: 100 x 150mm
+"media.om_small-photo_100x150mm" = "100 x 150mm";
+// TRANSLATORS: 89 x 89mm
+"media.om_square-photo_89x89mm" = "89 x 89mm";
+// TRANSLATORS: 100 x 200mm
+"media.om_wide-photo_100x200mm" = "100 x 200mm";
+// TRANSLATORS: Envelope Chinese #10
+"media.prc_10_324x458mm" = "Envelope Chinese #10";
+// TRANSLATORS: Chinese 16k
+"media.prc_16k_146x215mm" = "Chinese 16k";
+// TRANSLATORS: Envelope Chinese #1
+"media.prc_1_102x165mm" = "Envelope Chinese #1";
+// TRANSLATORS: Envelope Chinese #2
+"media.prc_2_102x176mm" = "Envelope Chinese #2";
+// TRANSLATORS: Chinese 32k
+"media.prc_32k_97x151mm" = "Chinese 32k";
+// TRANSLATORS: Envelope Chinese #3
+"media.prc_3_125x176mm" = "Envelope Chinese #3";
+// TRANSLATORS: Envelope Chinese #4
+"media.prc_4_110x208mm" = "Envelope Chinese #4";
+// TRANSLATORS: Envelope Chinese #5
+"media.prc_5_110x220mm" = "Envelope Chinese #5";
+// TRANSLATORS: Envelope Chinese #6
+"media.prc_6_120x320mm" = "Envelope Chinese #6";
+// TRANSLATORS: Envelope Chinese #7
+"media.prc_7_160x230mm" = "Envelope Chinese #7";
+// TRANSLATORS: Envelope Chinese #8
+"media.prc_8_120x309mm" = "Envelope Chinese #8";
+// TRANSLATORS: ROC 16k
+"media.roc_16k_7.75x10.75in" = "ROC 16k";
+// TRANSLATORS: ROC 8k
+"media.roc_8k_10.75x15.5in" = "ROC 8k";
"members of class %s:" = "members of class %s:";
+// TRANSLATORS: Multiple Document Handling
+"multiple-document-handling" = "Multiple Document Handling";
+// TRANSLATORS: Separate Documents Collated Copies
+"multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies";
+// TRANSLATORS: Separate Documents Uncollated Copies
+"multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies";
+// TRANSLATORS: Single Document
+"multiple-document-handling.single-document" = "Single Document";
+// TRANSLATORS: Single Document New Sheet
+"multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet";
+// TRANSLATORS: Multiple Object Handling
+"multiple-object-handling" = "Multiple Object Handling";
+// TRANSLATORS: Multiple Object Handling Actual
+"multiple-object-handling-actual" = "Multiple Object Handling Actual";
+// TRANSLATORS: Automatic
+"multiple-object-handling.auto" = "Automatic";
+// TRANSLATORS: Best Fit
+"multiple-object-handling.best-fit" = "Best Fit";
+// TRANSLATORS: Best Quality
+"multiple-object-handling.best-quality" = "Best Quality";
+// TRANSLATORS: Best Speed
+"multiple-object-handling.best-speed" = "Best Speed";
+// TRANSLATORS: One At A Time
+"multiple-object-handling.one-at-a-time" = "One At A Time";
+// TRANSLATORS: On Timeout
+"multiple-operation-time-out-action" = "On Timeout";
+// TRANSLATORS: Abort Job
+"multiple-operation-time-out-action.abort-job" = "Abort Job";
+// TRANSLATORS: Hold Job
+"multiple-operation-time-out-action.hold-job" = "Hold Job";
+// TRANSLATORS: Process Job
+"multiple-operation-time-out-action.process-job" = "Process Job";
"no entries" = "no entries";
"no system default destination" = "no system default destination";
+// TRANSLATORS: Noise Removal
+"noise-removal" = "Noise Removal";
+// TRANSLATORS: Notify Attributes
+"notify-attributes" = "Notify Attributes";
+// TRANSLATORS: Notify Charset
+"notify-charset" = "Notify Charset";
+// TRANSLATORS: Notify Events
+"notify-events" = "Notify Events";
"notify-events not specified." = "notify-events not specified.";
-"notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI \"%s\" is already used.";
+// TRANSLATORS: Document Completed
+"notify-events.document-completed" = "Document Completed";
+// TRANSLATORS: Document Config Changed
+"notify-events.document-config-changed" = "Document Config Changed";
+// TRANSLATORS: Document Created
+"notify-events.document-created" = "Document Created";
+// TRANSLATORS: Document Fetchable
+"notify-events.document-fetchable" = "Document Fetchable";
+// TRANSLATORS: Document State Changed
+"notify-events.document-state-changed" = "Document State Changed";
+// TRANSLATORS: Document Stopped
+"notify-events.document-stopped" = "Document Stopped";
+// TRANSLATORS: Job Completed
+"notify-events.job-completed" = "Job Completed";
+// TRANSLATORS: Job Config Changed
+"notify-events.job-config-changed" = "Job Config Changed";
+// TRANSLATORS: Job Created
+"notify-events.job-created" = "Job Created";
+// TRANSLATORS: Job Fetchable
+"notify-events.job-fetchable" = "Job Fetchable";
+// TRANSLATORS: Job Progress
+"notify-events.job-progress" = "Job Progress";
+// TRANSLATORS: Job State Changed
+"notify-events.job-state-changed" = "Job State Changed";
+// TRANSLATORS: Job Stopped
+"notify-events.job-stopped" = "Job Stopped";
+// TRANSLATORS: None
+"notify-events.none" = "None";
+// TRANSLATORS: Printer Config Changed
+"notify-events.printer-config-changed" = "Printer Config Changed";
+// TRANSLATORS: Printer Finishings Changed
+"notify-events.printer-finishings-changed" = "Printer Finishings Changed";
+// TRANSLATORS: Printer Media Changed
+"notify-events.printer-media-changed" = "Printer Media Changed";
+// TRANSLATORS: Printer Queue Order Changed
+"notify-events.printer-queue-order-changed" = "Printer Queue Order Changed";
+// TRANSLATORS: Printer Restarted
+"notify-events.printer-restarted" = "Printer Restarted";
+// TRANSLATORS: Printer Shutdown
+"notify-events.printer-shutdown" = "Printer Shutdown";
+// TRANSLATORS: Printer State Changed
+"notify-events.printer-state-changed" = "Printer State Changed";
+// TRANSLATORS: Printer Stopped
+"notify-events.printer-stopped" = "Printer Stopped";
+// TRANSLATORS: Notify Get Interval
+"notify-get-interval" = "Notify Get Interval";
+// TRANSLATORS: Notify Lease Duration
+"notify-lease-duration" = "Notify Lease Duration";
+// TRANSLATORS: Notify Natural Language
+"notify-natural-language" = "Notify Natural Language";
+// TRANSLATORS: Notify Pull Method
+"notify-pull-method" = "Notify Pull Method";
+// TRANSLATORS: Notify Recipient
+"notify-recipient-uri" = "Notify Recipient";
+"notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used.";
"notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI \"%s\" uses unknown scheme.";
+// TRANSLATORS: Notify Sequence Numbers
+"notify-sequence-numbers" = "Notify Sequence Numbers";
+// TRANSLATORS: Notify Subscription Ids
+"notify-subscription-ids" = "Notify Subscription Ids";
+// TRANSLATORS: Notify Time Interval
+"notify-time-interval" = "Notify Time Interval";
+// TRANSLATORS: Notify User Data
+"notify-user-data" = "Notify User Data";
+// TRANSLATORS: Notify Wait
+"notify-wait" = "Notify Wait";
+// TRANSLATORS: Number Of Retries
+"number-of-retries" = "Number Of Retries";
+// TRANSLATORS: Number-Up
+"number-up" = "Number-Up";
+// TRANSLATORS: Object Offset
+"object-offset" = "Object Offset";
+// TRANSLATORS: Object Size
+"object-size" = "Object Size";
+// TRANSLATORS: Organization Name
+"organization-name" = "Organization Name";
+// TRANSLATORS: Orientation
+"orientation-requested" = "Orientation";
+// TRANSLATORS: Portrait
+"orientation-requested.3" = "Portrait";
+// TRANSLATORS: Landscape
+"orientation-requested.4" = "Landscape";
+// TRANSLATORS: Reverse Landscape
+"orientation-requested.5" = "Reverse Landscape";
+// TRANSLATORS: Reverse Portrait
+"orientation-requested.6" = "Reverse Portrait";
+// TRANSLATORS: None
+"orientation-requested.7" = "None";
+// TRANSLATORS: Scanned Image Options
+"output-attributes" = "Scanned Image Options";
+// TRANSLATORS: Output Tray
+"output-bin" = "Output Tray";
+// TRANSLATORS: Automatic
+"output-bin.auto" = "Automatic";
+// TRANSLATORS: Bottom
+"output-bin.bottom" = "Bottom";
+// TRANSLATORS: Center
+"output-bin.center" = "Center";
+// TRANSLATORS: Face Down
+"output-bin.face-down" = "Face Down";
+// TRANSLATORS: Face Up
+"output-bin.face-up" = "Face Up";
+// TRANSLATORS: Large Capacity
+"output-bin.large-capacity" = "Large Capacity";
+// TRANSLATORS: Left
+"output-bin.left" = "Left";
+// TRANSLATORS: Mailbox 1
+"output-bin.mailbox-1" = "Mailbox 1";
+// TRANSLATORS: Mailbox 10
+"output-bin.mailbox-10" = "Mailbox 10";
+// TRANSLATORS: Mailbox 2
+"output-bin.mailbox-2" = "Mailbox 2";
+// TRANSLATORS: Mailbox 3
+"output-bin.mailbox-3" = "Mailbox 3";
+// TRANSLATORS: Mailbox 4
+"output-bin.mailbox-4" = "Mailbox 4";
+// TRANSLATORS: Mailbox 5
+"output-bin.mailbox-5" = "Mailbox 5";
+// TRANSLATORS: Mailbox 6
+"output-bin.mailbox-6" = "Mailbox 6";
+// TRANSLATORS: Mailbox 7
+"output-bin.mailbox-7" = "Mailbox 7";
+// TRANSLATORS: Mailbox 8
+"output-bin.mailbox-8" = "Mailbox 8";
+// TRANSLATORS: Mailbox 9
+"output-bin.mailbox-9" = "Mailbox 9";
+// TRANSLATORS: Middle
+"output-bin.middle" = "Middle";
+// TRANSLATORS: My Mailbox
+"output-bin.my-mailbox" = "My Mailbox";
+// TRANSLATORS: Rear
+"output-bin.rear" = "Rear";
+// TRANSLATORS: Right
+"output-bin.right" = "Right";
+// TRANSLATORS: Side
+"output-bin.side" = "Side";
+// TRANSLATORS: Stacker 1
+"output-bin.stacker-1" = "Stacker 1";
+// TRANSLATORS: Stacker 10
+"output-bin.stacker-10" = "Stacker 10";
+// TRANSLATORS: Stacker 2
+"output-bin.stacker-2" = "Stacker 2";
+// TRANSLATORS: Stacker 3
+"output-bin.stacker-3" = "Stacker 3";
+// TRANSLATORS: Stacker 4
+"output-bin.stacker-4" = "Stacker 4";
+// TRANSLATORS: Stacker 5
+"output-bin.stacker-5" = "Stacker 5";
+// TRANSLATORS: Stacker 6
+"output-bin.stacker-6" = "Stacker 6";
+// TRANSLATORS: Stacker 7
+"output-bin.stacker-7" = "Stacker 7";
+// TRANSLATORS: Stacker 8
+"output-bin.stacker-8" = "Stacker 8";
+// TRANSLATORS: Stacker 9
+"output-bin.stacker-9" = "Stacker 9";
+// TRANSLATORS: Top
+"output-bin.top" = "Top";
+// TRANSLATORS: Tray 1
+"output-bin.tray-1" = "Tray 1";
+// TRANSLATORS: Tray 10
+"output-bin.tray-10" = "Tray 10";
+// TRANSLATORS: Tray 2
+"output-bin.tray-2" = "Tray 2";
+// TRANSLATORS: Tray 3
+"output-bin.tray-3" = "Tray 3";
+// TRANSLATORS: Tray 4
+"output-bin.tray-4" = "Tray 4";
+// TRANSLATORS: Tray 5
+"output-bin.tray-5" = "Tray 5";
+// TRANSLATORS: Tray 6
+"output-bin.tray-6" = "Tray 6";
+// TRANSLATORS: Tray 7
+"output-bin.tray-7" = "Tray 7";
+// TRANSLATORS: Tray 8
+"output-bin.tray-8" = "Tray 8";
+// TRANSLATORS: Tray 9
+"output-bin.tray-9" = "Tray 9";
+// TRANSLATORS: Scanned Image Quality
+"output-compression-quality-factor" = "Scanned Image Quality";
+// TRANSLATORS: Page Delivery
+"page-delivery" = "Page Delivery";
+// TRANSLATORS: Reverse Order Face-down
+"page-delivery.reverse-order-face-down" = "Reverse Order Face-down";
+// TRANSLATORS: Reverse Order Face-up
+"page-delivery.reverse-order-face-up" = "Reverse Order Face-up";
+// TRANSLATORS: Same Order Face-down
+"page-delivery.same-order-face-down" = "Same Order Face-down";
+// TRANSLATORS: Same Order Face-up
+"page-delivery.same-order-face-up" = "Same Order Face-up";
+// TRANSLATORS: System Specified
+"page-delivery.system-specified" = "System Specified";
+// TRANSLATORS: Page Order Received
+"page-order-received" = "Page Order Received";
+// TRANSLATORS: 1 To N
+"page-order-received.1-to-n-order" = "1 To N";
+// TRANSLATORS: N To 1
+"page-order-received.n-to-1-order" = "N To 1";
+// TRANSLATORS: Page Ranges
+"page-ranges" = "Page Ranges";
+// TRANSLATORS: Pages
+"pages" = "Pages";
+// TRANSLATORS: Pages Per Subset
+"pages-per-subset" = "Pages Per Subset";
+// TRANSLATORS: Pclm Raster Back Side
+"pclm-raster-back-side" = "Pclm Raster Back Side";
+// TRANSLATORS: Flipped
+"pclm-raster-back-side.flipped" = "Flipped";
+// TRANSLATORS: Normal
+"pclm-raster-back-side.normal" = "Normal";
+// TRANSLATORS: Rotated
+"pclm-raster-back-side.rotated" = "Rotated";
+// TRANSLATORS: Pclm Source Resolution
+"pclm-source-resolution" = "Pclm Source Resolution";
"pending" = "pending";
-"ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory \"%s\".";
+// TRANSLATORS: Platform Shape
+"platform-shape" = "Platform Shape";
+// TRANSLATORS: Round
+"platform-shape.ellipse" = "Round";
+// TRANSLATORS: Rectangle
+"platform-shape.rectangle" = "Rectangle";
+// TRANSLATORS: Platform Temperature
+"platform-temperature" = "Platform Temperature";
+// TRANSLATORS: Post-dial String
+"post-dial-string" = "Post-dial String";
+"ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”.";
"ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s.";
"ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s.";
"ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s";
-"ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name \"%s\" on line %d of %s.";
+"ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s.";
"ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s.";
"ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s.";
"ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option.";
"ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s.";
"ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s.";
"ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s.";
-"ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename \"%s\".";
+"ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”.";
"ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s.";
"ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s.";
"ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s.";
-"ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section \"%s\" on line %d of %s.";
-"ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type \"%s\" on line %d of %s.";
-"ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file \"%s\".";
-"ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale \"%s\".";
-"ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from \"%s\".";
-"ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of \"%s\".";
+"ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s.";
+"ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s.";
+"ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”.";
+"ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”.";
+"ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”.";
+"ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”.";
"ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s.";
"ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s.";
"ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s.";
"ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s.";
"ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s.";
"ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s.";
-"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if's on line %d of %s.";
-"ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file \"%s\" - %s.";
+"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s.";
+"ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s.";
"ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s";
"ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s";
"ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s";
"ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s.";
-"ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file \"%s\" on line %d of %s.";
-"ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for \"%s\" - %s";
-"ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file \"%s\" - %s";
+"ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s.";
+"ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s";
+"ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s";
"ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s";
"ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s.";
"ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s.";
"ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s.";
-"ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type \"%s\" on line %d of %s.";
-"ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size \"%s\" on line %d of %s.";
-"ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for \"%s\".";
-"ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token \"%s\" seen on line %d of %s.";
-"ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s.";
+"ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s.";
+"ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s.";
+"ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”.";
+"ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s.";
+"ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s.";
"ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s.";
-"ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename \"%s\".";
+"ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”.";
"ppdc: Writing %s." = "ppdc: Writing %s.";
-"ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory \"%s\".";
-"ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion \"%s\" in %s.";
+"ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”.";
+"ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s.";
"ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s.";
"ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s";
+// TRANSLATORS: Pre-dial String
+"pre-dial-string" = "Pre-dial String";
+// TRANSLATORS: Number-Up Layout
+"presentation-direction-number-up" = "Number-Up Layout";
+// TRANSLATORS: Top-bottom, Right-left
+"presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left";
+// TRANSLATORS: Top-bottom, Left-right
+"presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right";
+// TRANSLATORS: Right-left, Top-bottom
+"presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom";
+// TRANSLATORS: Right-left, Bottom-top
+"presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top";
+// TRANSLATORS: Left-right, Top-bottom
+"presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom";
+// TRANSLATORS: Left-right, Bottom-top
+"presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top";
+// TRANSLATORS: Bottom-top, Right-left
+"presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left";
+// TRANSLATORS: Bottom-top, Left-right
+"presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right";
+// TRANSLATORS: Print Accuracy
+"print-accuracy" = "Print Accuracy";
+// TRANSLATORS: Print Base
+"print-base" = "Print Base";
+// TRANSLATORS: Print Base Actual
+"print-base-actual" = "Print Base Actual";
+// TRANSLATORS: Brim
+"print-base.brim" = "Brim";
+// TRANSLATORS: None
+"print-base.none" = "None";
+// TRANSLATORS: Raft
+"print-base.raft" = "Raft";
+// TRANSLATORS: Skirt
+"print-base.skirt" = "Skirt";
+// TRANSLATORS: Standard
+"print-base.standard" = "Standard";
+// TRANSLATORS: Print Color Mode
+"print-color-mode" = "Print Color Mode";
+// TRANSLATORS: Automatic
+"print-color-mode.auto" = "Automatic";
+// TRANSLATORS: Auto Monochrome
+"print-color-mode.auto-monochrome" = "Auto Monochrome";
+// TRANSLATORS: Text
+"print-color-mode.bi-level" = "Text";
+// TRANSLATORS: Color
+"print-color-mode.color" = "Color";
+// TRANSLATORS: Highlight
+"print-color-mode.highlight" = "Highlight";
+// TRANSLATORS: Monochrome
+"print-color-mode.monochrome" = "Monochrome";
+// TRANSLATORS: Process Text
+"print-color-mode.process-bi-level" = "Process Text";
+// TRANSLATORS: Process Monochrome
+"print-color-mode.process-monochrome" = "Process Monochrome";
+// TRANSLATORS: Print Optimization
+"print-content-optimize" = "Print Optimization";
+// TRANSLATORS: Print Content Optimize Actual
+"print-content-optimize-actual" = "print-content-optimize-actual";
+// TRANSLATORS: Automatic
+"print-content-optimize.auto" = "Automatic";
+// TRANSLATORS: Graphics
+"print-content-optimize.graphic" = "Graphics";
+// TRANSLATORS: Graphics
+"print-content-optimize.graphics" = "print-content-optimize.graphics";
+// TRANSLATORS: Photo
+"print-content-optimize.photo" = "Photo";
+// TRANSLATORS: Text
+"print-content-optimize.text" = "Text";
+// TRANSLATORS: Text and Graphics
+"print-content-optimize.text-and-graphic" = "Text and Graphics";
+// TRANSLATORS: Text And Graphics
+"print-content-optimize.text-and-graphics" = "print-content-optimize.text-and-graphics";
+// TRANSLATORS: Print Objects
+"print-objects" = "Print Objects";
+// TRANSLATORS: Print Quality
+"print-quality" = "Print Quality";
+// TRANSLATORS: Draft
+"print-quality.3" = "Draft";
+// TRANSLATORS: Normal
+"print-quality.4" = "Normal";
+// TRANSLATORS: High
+"print-quality.5" = "High";
+// TRANSLATORS: Print Rendering Intent
+"print-rendering-intent" = "Print Rendering Intent";
+// TRANSLATORS: Absolute
+"print-rendering-intent.absolute" = "Absolute";
+// TRANSLATORS: Automatic
+"print-rendering-intent.auto" = "Automatic";
+// TRANSLATORS: Perceptual
+"print-rendering-intent.perceptual" = "Perceptual";
+// TRANSLATORS: Relative
+"print-rendering-intent.relative" = "Relative";
+// TRANSLATORS: Relative w/Black Point Compensation
+"print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation";
+// TRANSLATORS: Saturation
+"print-rendering-intent.saturation" = "Saturation";
+// TRANSLATORS: Print Scaling
+"print-scaling" = "Print Scaling";
+// TRANSLATORS: Automatic
+"print-scaling.auto" = "Automatic";
+// TRANSLATORS: Auto-fit
+"print-scaling.auto-fit" = "Auto-fit";
+// TRANSLATORS: Fill
+"print-scaling.fill" = "Fill";
+// TRANSLATORS: Fit
+"print-scaling.fit" = "Fit";
+// TRANSLATORS: None
+"print-scaling.none" = "None";
+// TRANSLATORS: Print Supports
+"print-supports" = "Print Supports";
+// TRANSLATORS: Print Supports Actual
+"print-supports-actual" = "Print Supports Actual";
+// TRANSLATORS: With Specified Material
+"print-supports.material" = "With Specified Material";
+// TRANSLATORS: None
+"print-supports.none" = "None";
+// TRANSLATORS: Standard
+"print-supports.standard" = "Standard";
"printer %s disabled since %s -" = "printer %s disabled since %s -";
+"printer %s is holding new jobs. enabled since %s" = "printer %s is holding new jobs. enabled since %s";
"printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s";
"printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s";
"printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -";
"printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s";
"printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s";
+// TRANSLATORS: Printer Kind
+"printer-kind" = "printer-kind";
+// TRANSLATORS: Disc
+"printer-kind.disc" = "printer-kind.disc";
+// TRANSLATORS: Document
+"printer-kind.document" = "printer-kind.document";
+// TRANSLATORS: Envelope
+"printer-kind.envelope" = "printer-kind.envelope";
+// TRANSLATORS: Label
+"printer-kind.label" = "printer-kind.label";
+// TRANSLATORS: Large Format
+"printer-kind.large-format" = "printer-kind.large-format";
+// TRANSLATORS: Photo
+"printer-kind.photo" = "printer-kind.photo";
+// TRANSLATORS: Postcard
+"printer-kind.postcard" = "printer-kind.postcard";
+// TRANSLATORS: Receipt
+"printer-kind.receipt" = "printer-kind.receipt";
+// TRANSLATORS: Roll
+"printer-kind.roll" = "printer-kind.roll";
+// TRANSLATORS: Message From Operator
+"printer-message-from-operator" = "Message From Operator";
+// TRANSLATORS: Print Resolution
+"printer-resolution" = "Print Resolution";
+// TRANSLATORS: Printer State
+"printer-state" = "Printer State";
+// TRANSLATORS: Detailed Printer State
+"printer-state-reasons" = "Detailed Printer State";
+// TRANSLATORS: Old Alerts Have Been Removed
+"printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed";
+// TRANSLATORS: Bander Added
+"printer-state-reasons.bander-added" = "Bander Added";
+// TRANSLATORS: Bander Almost Empty
+"printer-state-reasons.bander-almost-empty" = "Bander Almost Empty";
+// TRANSLATORS: Bander Almost Full
+"printer-state-reasons.bander-almost-full" = "Bander Almost Full";
+// TRANSLATORS: Bander At Limit
+"printer-state-reasons.bander-at-limit" = "Bander At Limit";
+// TRANSLATORS: Bander Closed
+"printer-state-reasons.bander-closed" = "Bander Closed";
+// TRANSLATORS: Bander Configuration Change
+"printer-state-reasons.bander-configuration-change" = "Bander Configuration Change";
+// TRANSLATORS: Bander Cover Closed
+"printer-state-reasons.bander-cover-closed" = "Bander Cover Closed";
+// TRANSLATORS: Bander Cover Open
+"printer-state-reasons.bander-cover-open" = "Bander Cover Open";
+// TRANSLATORS: Bander Empty
+"printer-state-reasons.bander-empty" = "Bander Empty";
+// TRANSLATORS: Bander Full
+"printer-state-reasons.bander-full" = "Bander Full";
+// TRANSLATORS: Bander Interlock Closed
+"printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed";
+// TRANSLATORS: Bander Interlock Open
+"printer-state-reasons.bander-interlock-open" = "Bander Interlock Open";
+// TRANSLATORS: Bander Jam
+"printer-state-reasons.bander-jam" = "Bander Jam";
+// TRANSLATORS: Bander Life Almost Over
+"printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over";
+// TRANSLATORS: Bander Life Over
+"printer-state-reasons.bander-life-over" = "Bander Life Over";
+// TRANSLATORS: Bander Memory Exhausted
+"printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted";
+// TRANSLATORS: Bander Missing
+"printer-state-reasons.bander-missing" = "Bander Missing";
+// TRANSLATORS: Bander Motor Failure
+"printer-state-reasons.bander-motor-failure" = "Bander Motor Failure";
+// TRANSLATORS: Bander Near Limit
+"printer-state-reasons.bander-near-limit" = "Bander Near Limit";
+// TRANSLATORS: Bander Offline
+"printer-state-reasons.bander-offline" = "Bander Offline";
+// TRANSLATORS: Bander Opened
+"printer-state-reasons.bander-opened" = "Bander Opened";
+// TRANSLATORS: Bander Over Temperature
+"printer-state-reasons.bander-over-temperature" = "Bander Over Temperature";
+// TRANSLATORS: Bander Power Saver
+"printer-state-reasons.bander-power-saver" = "Bander Power Saver";
+// TRANSLATORS: Bander Recoverable Failure
+"printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure";
+// TRANSLATORS: Bander Recoverable Storage
+"printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage";
+// TRANSLATORS: Bander Removed
+"printer-state-reasons.bander-removed" = "Bander Removed";
+// TRANSLATORS: Bander Resource Added
+"printer-state-reasons.bander-resource-added" = "Bander Resource Added";
+// TRANSLATORS: Bander Resource Removed
+"printer-state-reasons.bander-resource-removed" = "Bander Resource Removed";
+// TRANSLATORS: Bander Thermistor Failure
+"printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure";
+// TRANSLATORS: Bander Timing Failure
+"printer-state-reasons.bander-timing-failure" = "Bander Timing Failure";
+// TRANSLATORS: Bander Turned Off
+"printer-state-reasons.bander-turned-off" = "Bander Turned Off";
+// TRANSLATORS: Bander Turned On
+"printer-state-reasons.bander-turned-on" = "Bander Turned On";
+// TRANSLATORS: Bander Under Temperature
+"printer-state-reasons.bander-under-temperature" = "Bander Under Temperature";
+// TRANSLATORS: Bander Unrecoverable Failure
+"printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure";
+// TRANSLATORS: Bander Unrecoverable Storage Error
+"printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error";
+// TRANSLATORS: Bander Warming Up
+"printer-state-reasons.bander-warming-up" = "Bander Warming Up";
+// TRANSLATORS: Binder Added
+"printer-state-reasons.binder-added" = "Binder Added";
+// TRANSLATORS: Binder Almost Empty
+"printer-state-reasons.binder-almost-empty" = "Binder Almost Empty";
+// TRANSLATORS: Binder Almost Full
+"printer-state-reasons.binder-almost-full" = "Binder Almost Full";
+// TRANSLATORS: Binder At Limit
+"printer-state-reasons.binder-at-limit" = "Binder At Limit";
+// TRANSLATORS: Binder Closed
+"printer-state-reasons.binder-closed" = "Binder Closed";
+// TRANSLATORS: Binder Configuration Change
+"printer-state-reasons.binder-configuration-change" = "Binder Configuration Change";
+// TRANSLATORS: Binder Cover Closed
+"printer-state-reasons.binder-cover-closed" = "Binder Cover Closed";
+// TRANSLATORS: Binder Cover Open
+"printer-state-reasons.binder-cover-open" = "Binder Cover Open";
+// TRANSLATORS: Binder Empty
+"printer-state-reasons.binder-empty" = "Binder Empty";
+// TRANSLATORS: Binder Full
+"printer-state-reasons.binder-full" = "Binder Full";
+// TRANSLATORS: Binder Interlock Closed
+"printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed";
+// TRANSLATORS: Binder Interlock Open
+"printer-state-reasons.binder-interlock-open" = "Binder Interlock Open";
+// TRANSLATORS: Binder Jam
+"printer-state-reasons.binder-jam" = "Binder Jam";
+// TRANSLATORS: Binder Life Almost Over
+"printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over";
+// TRANSLATORS: Binder Life Over
+"printer-state-reasons.binder-life-over" = "Binder Life Over";
+// TRANSLATORS: Binder Memory Exhausted
+"printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted";
+// TRANSLATORS: Binder Missing
+"printer-state-reasons.binder-missing" = "Binder Missing";
+// TRANSLATORS: Binder Motor Failure
+"printer-state-reasons.binder-motor-failure" = "Binder Motor Failure";
+// TRANSLATORS: Binder Near Limit
+"printer-state-reasons.binder-near-limit" = "Binder Near Limit";
+// TRANSLATORS: Binder Offline
+"printer-state-reasons.binder-offline" = "Binder Offline";
+// TRANSLATORS: Binder Opened
+"printer-state-reasons.binder-opened" = "Binder Opened";
+// TRANSLATORS: Binder Over Temperature
+"printer-state-reasons.binder-over-temperature" = "Binder Over Temperature";
+// TRANSLATORS: Binder Power Saver
+"printer-state-reasons.binder-power-saver" = "Binder Power Saver";
+// TRANSLATORS: Binder Recoverable Failure
+"printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure";
+// TRANSLATORS: Binder Recoverable Storage
+"printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage";
+// TRANSLATORS: Binder Removed
+"printer-state-reasons.binder-removed" = "Binder Removed";
+// TRANSLATORS: Binder Resource Added
+"printer-state-reasons.binder-resource-added" = "Binder Resource Added";
+// TRANSLATORS: Binder Resource Removed
+"printer-state-reasons.binder-resource-removed" = "Binder Resource Removed";
+// TRANSLATORS: Binder Thermistor Failure
+"printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure";
+// TRANSLATORS: Binder Timing Failure
+"printer-state-reasons.binder-timing-failure" = "Binder Timing Failure";
+// TRANSLATORS: Binder Turned Off
+"printer-state-reasons.binder-turned-off" = "Binder Turned Off";
+// TRANSLATORS: Binder Turned On
+"printer-state-reasons.binder-turned-on" = "Binder Turned On";
+// TRANSLATORS: Binder Under Temperature
+"printer-state-reasons.binder-under-temperature" = "Binder Under Temperature";
+// TRANSLATORS: Binder Unrecoverable Failure
+"printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure";
+// TRANSLATORS: Binder Unrecoverable Storage Error
+"printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error";
+// TRANSLATORS: Binder Warming Up
+"printer-state-reasons.binder-warming-up" = "Binder Warming Up";
+// TRANSLATORS: Camera Failure
+"printer-state-reasons.camera-failure" = "Camera Failure";
+// TRANSLATORS: Chamber Cooling
+"printer-state-reasons.chamber-cooling" = "Chamber Cooling";
+// TRANSLATORS: Chamber Failure
+"printer-state-reasons.chamber-failure" = "Chamber Failure";
+// TRANSLATORS: Chamber Heating
+"printer-state-reasons.chamber-heating" = "Chamber Heating";
+// TRANSLATORS: Chamber Temperature High
+"printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High";
+// TRANSLATORS: Chamber Temperature Low
+"printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low";
+// TRANSLATORS: Cleaner Life Almost Over
+"printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over";
+// TRANSLATORS: Cleaner Life Over
+"printer-state-reasons.cleaner-life-over" = "Cleaner Life Over";
+// TRANSLATORS: Configuration Change
+"printer-state-reasons.configuration-change" = "Configuration Change";
+// TRANSLATORS: Connecting To Device
+"printer-state-reasons.connecting-to-device" = "Connecting To Device";
+// TRANSLATORS: Cover Open
+"printer-state-reasons.cover-open" = "Cover Open";
+// TRANSLATORS: Deactivated
+"printer-state-reasons.deactivated" = "Deactivated";
+// TRANSLATORS: Developer Empty
+"printer-state-reasons.developer-empty" = "Developer Empty";
+// TRANSLATORS: Developer Low
+"printer-state-reasons.developer-low" = "Developer Low";
+// TRANSLATORS: Die Cutter Added
+"printer-state-reasons.die-cutter-added" = "Die Cutter Added";
+// TRANSLATORS: Die Cutter Almost Empty
+"printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty";
+// TRANSLATORS: Die Cutter Almost Full
+"printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full";
+// TRANSLATORS: Die Cutter At Limit
+"printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit";
+// TRANSLATORS: Die Cutter Closed
+"printer-state-reasons.die-cutter-closed" = "Die Cutter Closed";
+// TRANSLATORS: Die Cutter Configuration Change
+"printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change";
+// TRANSLATORS: Die Cutter Cover Closed
+"printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed";
+// TRANSLATORS: Die Cutter Cover Open
+"printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open";
+// TRANSLATORS: Die Cutter Empty
+"printer-state-reasons.die-cutter-empty" = "Die Cutter Empty";
+// TRANSLATORS: Die Cutter Full
+"printer-state-reasons.die-cutter-full" = "Die Cutter Full";
+// TRANSLATORS: Die Cutter Interlock Closed
+"printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed";
+// TRANSLATORS: Die Cutter Interlock Open
+"printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open";
+// TRANSLATORS: Die Cutter Jam
+"printer-state-reasons.die-cutter-jam" = "Die Cutter Jam";
+// TRANSLATORS: Die Cutter Life Almost Over
+"printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over";
+// TRANSLATORS: Die Cutter Life Over
+"printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over";
+// TRANSLATORS: Die Cutter Memory Exhausted
+"printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted";
+// TRANSLATORS: Die Cutter Missing
+"printer-state-reasons.die-cutter-missing" = "Die Cutter Missing";
+// TRANSLATORS: Die Cutter Motor Failure
+"printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure";
+// TRANSLATORS: Die Cutter Near Limit
+"printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit";
+// TRANSLATORS: Die Cutter Offline
+"printer-state-reasons.die-cutter-offline" = "Die Cutter Offline";
+// TRANSLATORS: Die Cutter Opened
+"printer-state-reasons.die-cutter-opened" = "Die Cutter Opened";
+// TRANSLATORS: Die Cutter Over Temperature
+"printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature";
+// TRANSLATORS: Die Cutter Power Saver
+"printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver";
+// TRANSLATORS: Die Cutter Recoverable Failure
+"printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure";
+// TRANSLATORS: Die Cutter Recoverable Storage
+"printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage";
+// TRANSLATORS: Die Cutter Removed
+"printer-state-reasons.die-cutter-removed" = "Die Cutter Removed";
+// TRANSLATORS: Die Cutter Resource Added
+"printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added";
+// TRANSLATORS: Die Cutter Resource Removed
+"printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed";
+// TRANSLATORS: Die Cutter Thermistor Failure
+"printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure";
+// TRANSLATORS: Die Cutter Timing Failure
+"printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure";
+// TRANSLATORS: Die Cutter Turned Off
+"printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off";
+// TRANSLATORS: Die Cutter Turned On
+"printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On";
+// TRANSLATORS: Die Cutter Under Temperature
+"printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature";
+// TRANSLATORS: Die Cutter Unrecoverable Failure
+"printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure";
+// TRANSLATORS: Die Cutter Unrecoverable Storage Error
+"printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error";
+// TRANSLATORS: Die Cutter Warming Up
+"printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up";
+// TRANSLATORS: Door Open
+"printer-state-reasons.door-open" = "Door Open";
+// TRANSLATORS: Extruder Cooling
+"printer-state-reasons.extruder-cooling" = "Extruder Cooling";
+// TRANSLATORS: Extruder Failure
+"printer-state-reasons.extruder-failure" = "Extruder Failure";
+// TRANSLATORS: Extruder Heating
+"printer-state-reasons.extruder-heating" = "Extruder Heating";
+// TRANSLATORS: Extruder Jam
+"printer-state-reasons.extruder-jam" = "Extruder Jam";
+// TRANSLATORS: Extruder Temperature High
+"printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High";
+// TRANSLATORS: Extruder Temperature Low
+"printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low";
+// TRANSLATORS: Fan Failure
+"printer-state-reasons.fan-failure" = "Fan Failure";
+// TRANSLATORS: Fax Modem Life Almost Over
+"printer-state-reasons.fax-modem-life-almost-over" = "printer-state-reasons.fax-modem-life-almost-over";
+// TRANSLATORS: Fax Modem Life Over
+"printer-state-reasons.fax-modem-life-over" = "printer-state-reasons.fax-modem-life-over";
+// TRANSLATORS: Fax Modem Missing
+"printer-state-reasons.fax-modem-missing" = "printer-state-reasons.fax-modem-missing";
+// TRANSLATORS: Fax Modem Turned Off
+"printer-state-reasons.fax-modem-turned-off" = "printer-state-reasons.fax-modem-turned-off";
+// TRANSLATORS: Fax Modem Turned On
+"printer-state-reasons.fax-modem-turned-on" = "printer-state-reasons.fax-modem-turned-on";
+// TRANSLATORS: Folder Added
+"printer-state-reasons.folder-added" = "Folder Added";
+// TRANSLATORS: Folder Almost Empty
+"printer-state-reasons.folder-almost-empty" = "Folder Almost Empty";
+// TRANSLATORS: Folder Almost Full
+"printer-state-reasons.folder-almost-full" = "Folder Almost Full";
+// TRANSLATORS: Folder At Limit
+"printer-state-reasons.folder-at-limit" = "Folder At Limit";
+// TRANSLATORS: Folder Closed
+"printer-state-reasons.folder-closed" = "Folder Closed";
+// TRANSLATORS: Folder Configuration Change
+"printer-state-reasons.folder-configuration-change" = "Folder Configuration Change";
+// TRANSLATORS: Folder Cover Closed
+"printer-state-reasons.folder-cover-closed" = "Folder Cover Closed";
+// TRANSLATORS: Folder Cover Open
+"printer-state-reasons.folder-cover-open" = "Folder Cover Open";
+// TRANSLATORS: Folder Empty
+"printer-state-reasons.folder-empty" = "Folder Empty";
+// TRANSLATORS: Folder Full
+"printer-state-reasons.folder-full" = "Folder Full";
+// TRANSLATORS: Folder Interlock Closed
+"printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed";
+// TRANSLATORS: Folder Interlock Open
+"printer-state-reasons.folder-interlock-open" = "Folder Interlock Open";
+// TRANSLATORS: Folder Jam
+"printer-state-reasons.folder-jam" = "Folder Jam";
+// TRANSLATORS: Folder Life Almost Over
+"printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over";
+// TRANSLATORS: Folder Life Over
+"printer-state-reasons.folder-life-over" = "Folder Life Over";
+// TRANSLATORS: Folder Memory Exhausted
+"printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted";
+// TRANSLATORS: Folder Missing
+"printer-state-reasons.folder-missing" = "Folder Missing";
+// TRANSLATORS: Folder Motor Failure
+"printer-state-reasons.folder-motor-failure" = "Folder Motor Failure";
+// TRANSLATORS: Folder Near Limit
+"printer-state-reasons.folder-near-limit" = "Folder Near Limit";
+// TRANSLATORS: Folder Offline
+"printer-state-reasons.folder-offline" = "Folder Offline";
+// TRANSLATORS: Folder Opened
+"printer-state-reasons.folder-opened" = "Folder Opened";
+// TRANSLATORS: Folder Over Temperature
+"printer-state-reasons.folder-over-temperature" = "Folder Over Temperature";
+// TRANSLATORS: Folder Power Saver
+"printer-state-reasons.folder-power-saver" = "Folder Power Saver";
+// TRANSLATORS: Folder Recoverable Failure
+"printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure";
+// TRANSLATORS: Folder Recoverable Storage
+"printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage";
+// TRANSLATORS: Folder Removed
+"printer-state-reasons.folder-removed" = "Folder Removed";
+// TRANSLATORS: Folder Resource Added
+"printer-state-reasons.folder-resource-added" = "Folder Resource Added";
+// TRANSLATORS: Folder Resource Removed
+"printer-state-reasons.folder-resource-removed" = "Folder Resource Removed";
+// TRANSLATORS: Folder Thermistor Failure
+"printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure";
+// TRANSLATORS: Folder Timing Failure
+"printer-state-reasons.folder-timing-failure" = "Folder Timing Failure";
+// TRANSLATORS: Folder Turned Off
+"printer-state-reasons.folder-turned-off" = "Folder Turned Off";
+// TRANSLATORS: Folder Turned On
+"printer-state-reasons.folder-turned-on" = "Folder Turned On";
+// TRANSLATORS: Folder Under Temperature
+"printer-state-reasons.folder-under-temperature" = "Folder Under Temperature";
+// TRANSLATORS: Folder Unrecoverable Failure
+"printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure";
+// TRANSLATORS: Folder Unrecoverable Storage Error
+"printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error";
+// TRANSLATORS: Folder Warming Up
+"printer-state-reasons.folder-warming-up" = "Folder Warming Up";
+// TRANSLATORS: Fuser temperature high
+"printer-state-reasons.fuser-over-temp" = "Fuser Over Temp";
+// TRANSLATORS: Fuser temperature low
+"printer-state-reasons.fuser-under-temp" = "Fuser Under Temp";
+// TRANSLATORS: Hold New Jobs
+"printer-state-reasons.hold-new-jobs" = "Hold New Jobs";
+// TRANSLATORS: Identify Printer
+"printer-state-reasons.identify-printer-requested" = "Identify Printer";
+// TRANSLATORS: Imprinter Added
+"printer-state-reasons.imprinter-added" = "Imprinter Added";
+// TRANSLATORS: Imprinter Almost Empty
+"printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty";
+// TRANSLATORS: Imprinter Almost Full
+"printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full";
+// TRANSLATORS: Imprinter At Limit
+"printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit";
+// TRANSLATORS: Imprinter Closed
+"printer-state-reasons.imprinter-closed" = "Imprinter Closed";
+// TRANSLATORS: Imprinter Configuration Change
+"printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change";
+// TRANSLATORS: Imprinter Cover Closed
+"printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed";
+// TRANSLATORS: Imprinter Cover Open
+"printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open";
+// TRANSLATORS: Imprinter Empty
+"printer-state-reasons.imprinter-empty" = "Imprinter Empty";
+// TRANSLATORS: Imprinter Full
+"printer-state-reasons.imprinter-full" = "Imprinter Full";
+// TRANSLATORS: Imprinter Interlock Closed
+"printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed";
+// TRANSLATORS: Imprinter Interlock Open
+"printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open";
+// TRANSLATORS: Imprinter Jam
+"printer-state-reasons.imprinter-jam" = "Imprinter Jam";
+// TRANSLATORS: Imprinter Life Almost Over
+"printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over";
+// TRANSLATORS: Imprinter Life Over
+"printer-state-reasons.imprinter-life-over" = "Imprinter Life Over";
+// TRANSLATORS: Imprinter Memory Exhausted
+"printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted";
+// TRANSLATORS: Imprinter Missing
+"printer-state-reasons.imprinter-missing" = "Imprinter Missing";
+// TRANSLATORS: Imprinter Motor Failure
+"printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure";
+// TRANSLATORS: Imprinter Near Limit
+"printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit";
+// TRANSLATORS: Imprinter Offline
+"printer-state-reasons.imprinter-offline" = "Imprinter Offline";
+// TRANSLATORS: Imprinter Opened
+"printer-state-reasons.imprinter-opened" = "Imprinter Opened";
+// TRANSLATORS: Imprinter Over Temperature
+"printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature";
+// TRANSLATORS: Imprinter Power Saver
+"printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver";
+// TRANSLATORS: Imprinter Recoverable Failure
+"printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure";
+// TRANSLATORS: Imprinter Recoverable Storage
+"printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage";
+// TRANSLATORS: Imprinter Removed
+"printer-state-reasons.imprinter-removed" = "Imprinter Removed";
+// TRANSLATORS: Imprinter Resource Added
+"printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added";
+// TRANSLATORS: Imprinter Resource Removed
+"printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed";
+// TRANSLATORS: Imprinter Thermistor Failure
+"printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure";
+// TRANSLATORS: Imprinter Timing Failure
+"printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure";
+// TRANSLATORS: Imprinter Turned Off
+"printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off";
+// TRANSLATORS: Imprinter Turned On
+"printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On";
+// TRANSLATORS: Imprinter Under Temperature
+"printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature";
+// TRANSLATORS: Imprinter Unrecoverable Failure
+"printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure";
+// TRANSLATORS: Imprinter Unrecoverable Storage Error
+"printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error";
+// TRANSLATORS: Imprinter Warming Up
+"printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up";
+// TRANSLATORS: Input Cannot Feed Size Selected
+"printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected";
+// TRANSLATORS: Input Manual Input Request
+"printer-state-reasons.input-manual-input-request" = "Input Manual Input Request";
+// TRANSLATORS: Input Media Color Change
+"printer-state-reasons.input-media-color-change" = "Input Media Color Change";
+// TRANSLATORS: Input Media Form Parts Change
+"printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change";
+// TRANSLATORS: Input Media Size Change
+"printer-state-reasons.input-media-size-change" = "Input Media Size Change";
+// TRANSLATORS: Input Media Tray Failure
+"printer-state-reasons.input-media-tray-failure" = "printer-state-reasons.input-media-tray-failure";
+// TRANSLATORS: Input Media Tray Feed Error
+"printer-state-reasons.input-media-tray-feed-error" = "printer-state-reasons.input-media-tray-feed-error";
+// TRANSLATORS: Input Media Tray Jam
+"printer-state-reasons.input-media-tray-jam" = "printer-state-reasons.input-media-tray-jam";
+// TRANSLATORS: Input Media Type Change
+"printer-state-reasons.input-media-type-change" = "Input Media Type Change";
+// TRANSLATORS: Input Media Weight Change
+"printer-state-reasons.input-media-weight-change" = "Input Media Weight Change";
+// TRANSLATORS: Input Pick Roller Failure
+"printer-state-reasons.input-pick-roller-failure" = "printer-state-reasons.input-pick-roller-failure";
+// TRANSLATORS: Input Pick Roller Life Over
+"printer-state-reasons.input-pick-roller-life-over" = "printer-state-reasons.input-pick-roller-life-over";
+// TRANSLATORS: Input Pick Roller Life Warn
+"printer-state-reasons.input-pick-roller-life-warn" = "printer-state-reasons.input-pick-roller-life-warn";
+// TRANSLATORS: Input Pick Roller Missing
+"printer-state-reasons.input-pick-roller-missing" = "printer-state-reasons.input-pick-roller-missing";
+// TRANSLATORS: Input Tray Elevation Failure
+"printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure";
+// TRANSLATORS: Paper tray is missing
+"printer-state-reasons.input-tray-missing" = "Input Tray Missing";
+// TRANSLATORS: Input Tray Position Failure
+"printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure";
+// TRANSLATORS: Inserter Added
+"printer-state-reasons.inserter-added" = "Inserter Added";
+// TRANSLATORS: Inserter Almost Empty
+"printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty";
+// TRANSLATORS: Inserter Almost Full
+"printer-state-reasons.inserter-almost-full" = "Inserter Almost Full";
+// TRANSLATORS: Inserter At Limit
+"printer-state-reasons.inserter-at-limit" = "Inserter At Limit";
+// TRANSLATORS: Inserter Closed
+"printer-state-reasons.inserter-closed" = "Inserter Closed";
+// TRANSLATORS: Inserter Configuration Change
+"printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change";
+// TRANSLATORS: Inserter Cover Closed
+"printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed";
+// TRANSLATORS: Inserter Cover Open
+"printer-state-reasons.inserter-cover-open" = "Inserter Cover Open";
+// TRANSLATORS: Inserter Empty
+"printer-state-reasons.inserter-empty" = "Inserter Empty";
+// TRANSLATORS: Inserter Full
+"printer-state-reasons.inserter-full" = "Inserter Full";
+// TRANSLATORS: Inserter Interlock Closed
+"printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed";
+// TRANSLATORS: Inserter Interlock Open
+"printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open";
+// TRANSLATORS: Inserter Jam
+"printer-state-reasons.inserter-jam" = "Inserter Jam";
+// TRANSLATORS: Inserter Life Almost Over
+"printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over";
+// TRANSLATORS: Inserter Life Over
+"printer-state-reasons.inserter-life-over" = "Inserter Life Over";
+// TRANSLATORS: Inserter Memory Exhausted
+"printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted";
+// TRANSLATORS: Inserter Missing
+"printer-state-reasons.inserter-missing" = "Inserter Missing";
+// TRANSLATORS: Inserter Motor Failure
+"printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure";
+// TRANSLATORS: Inserter Near Limit
+"printer-state-reasons.inserter-near-limit" = "Inserter Near Limit";
+// TRANSLATORS: Inserter Offline
+"printer-state-reasons.inserter-offline" = "Inserter Offline";
+// TRANSLATORS: Inserter Opened
+"printer-state-reasons.inserter-opened" = "Inserter Opened";
+// TRANSLATORS: Inserter Over Temperature
+"printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature";
+// TRANSLATORS: Inserter Power Saver
+"printer-state-reasons.inserter-power-saver" = "Inserter Power Saver";
+// TRANSLATORS: Inserter Recoverable Failure
+"printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure";
+// TRANSLATORS: Inserter Recoverable Storage
+"printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage";
+// TRANSLATORS: Inserter Removed
+"printer-state-reasons.inserter-removed" = "Inserter Removed";
+// TRANSLATORS: Inserter Resource Added
+"printer-state-reasons.inserter-resource-added" = "Inserter Resource Added";
+// TRANSLATORS: Inserter Resource Removed
+"printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed";
+// TRANSLATORS: Inserter Thermistor Failure
+"printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure";
+// TRANSLATORS: Inserter Timing Failure
+"printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure";
+// TRANSLATORS: Inserter Turned Off
+"printer-state-reasons.inserter-turned-off" = "Inserter Turned Off";
+// TRANSLATORS: Inserter Turned On
+"printer-state-reasons.inserter-turned-on" = "Inserter Turned On";
+// TRANSLATORS: Inserter Under Temperature
+"printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature";
+// TRANSLATORS: Inserter Unrecoverable Failure
+"printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure";
+// TRANSLATORS: Inserter Unrecoverable Storage Error
+"printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error";
+// TRANSLATORS: Inserter Warming Up
+"printer-state-reasons.inserter-warming-up" = "Inserter Warming Up";
+// TRANSLATORS: Interlock Closed
+"printer-state-reasons.interlock-closed" = "Interlock Closed";
+// TRANSLATORS: Interlock Open
+"printer-state-reasons.interlock-open" = "Interlock Open";
+// TRANSLATORS: Interpreter Cartridge Added
+"printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added";
+// TRANSLATORS: Interpreter Cartridge Removed
+"printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed";
+// TRANSLATORS: Interpreter Complex Page Encountered
+"printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered";
+// TRANSLATORS: Interpreter Memory Decrease
+"printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease";
+// TRANSLATORS: Interpreter Memory Increase
+"printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase";
+// TRANSLATORS: Interpreter Resource Added
+"printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added";
+// TRANSLATORS: Interpreter Resource Deleted
+"printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted";
+// TRANSLATORS: Printer resource unavailable
+"printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable";
+// TRANSLATORS: Lamp At End of Life
+"printer-state-reasons.lamp-at-eol" = "Lamp At End of Life";
+// TRANSLATORS: Lamp Failure
+"printer-state-reasons.lamp-failure" = "Lamp Failure";
+// TRANSLATORS: Lamp Near End of Life
+"printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life";
+// TRANSLATORS: Laser At End of Life
+"printer-state-reasons.laser-at-eol" = "Laser At End of Life";
+// TRANSLATORS: Laser Failure
+"printer-state-reasons.laser-failure" = "Laser Failure";
+// TRANSLATORS: Laser Near End of Life
+"printer-state-reasons.laser-near-eol" = "Laser Near End of Life";
+// TRANSLATORS: Envelope Maker Added
+"printer-state-reasons.make-envelope-added" = "Envelope Maker Added";
+// TRANSLATORS: Envelope Maker Almost Empty
+"printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty";
+// TRANSLATORS: Envelope Maker Almost Full
+"printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full";
+// TRANSLATORS: Envelope Maker At Limit
+"printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit";
+// TRANSLATORS: Envelope Maker Closed
+"printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed";
+// TRANSLATORS: Envelope Maker Configuration Change
+"printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change";
+// TRANSLATORS: Envelope Maker Cover Closed
+"printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed";
+// TRANSLATORS: Envelope Maker Cover Open
+"printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open";
+// TRANSLATORS: Envelope Maker Empty
+"printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty";
+// TRANSLATORS: Envelope Maker Full
+"printer-state-reasons.make-envelope-full" = "Envelope Maker Full";
+// TRANSLATORS: Envelope Maker Interlock Closed
+"printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed";
+// TRANSLATORS: Envelope Maker Interlock Open
+"printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open";
+// TRANSLATORS: Envelope Maker Jam
+"printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam";
+// TRANSLATORS: Envelope Maker Life Almost Over
+"printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over";
+// TRANSLATORS: Envelope Maker Life Over
+"printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over";
+// TRANSLATORS: Envelope Maker Memory Exhausted
+"printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted";
+// TRANSLATORS: Envelope Maker Missing
+"printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing";
+// TRANSLATORS: Envelope Maker Motor Failure
+"printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure";
+// TRANSLATORS: Envelope Maker Near Limit
+"printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit";
+// TRANSLATORS: Envelope Maker Offline
+"printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline";
+// TRANSLATORS: Envelope Maker Opened
+"printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened";
+// TRANSLATORS: Envelope Maker Over Temperature
+"printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature";
+// TRANSLATORS: Envelope Maker Power Saver
+"printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver";
+// TRANSLATORS: Envelope Maker Recoverable Failure
+"printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure";
+// TRANSLATORS: Envelope Maker Recoverable Storage
+"printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage";
+// TRANSLATORS: Envelope Maker Removed
+"printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed";
+// TRANSLATORS: Envelope Maker Resource Added
+"printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added";
+// TRANSLATORS: Envelope Maker Resource Removed
+"printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed";
+// TRANSLATORS: Envelope Maker Thermistor Failure
+"printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure";
+// TRANSLATORS: Envelope Maker Timing Failure
+"printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure";
+// TRANSLATORS: Envelope Maker Turned Off
+"printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off";
+// TRANSLATORS: Envelope Maker Turned On
+"printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On";
+// TRANSLATORS: Envelope Maker Under Temperature
+"printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature";
+// TRANSLATORS: Envelope Maker Unrecoverable Failure
+"printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure";
+// TRANSLATORS: Envelope Maker Unrecoverable Storage Error
+"printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error";
+// TRANSLATORS: Envelope Maker Warming Up
+"printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up";
+// TRANSLATORS: Marker Adjusting Print Quality
+"printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality";
+// TRANSLATORS: Marker Cleaner Missing
+"printer-state-reasons.marker-cleaner-missing" = "printer-state-reasons.marker-cleaner-missing";
+// TRANSLATORS: Marker Developer Almost Empty
+"printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty";
+// TRANSLATORS: Marker Developer Empty
+"printer-state-reasons.marker-developer-empty" = "Marker Developer Empty";
+// TRANSLATORS: Marker Developer Missing
+"printer-state-reasons.marker-developer-missing" = "printer-state-reasons.marker-developer-missing";
+// TRANSLATORS: Marker Fuser Missing
+"printer-state-reasons.marker-fuser-missing" = "printer-state-reasons.marker-fuser-missing";
+// TRANSLATORS: Marker Fuser Thermistor Failure
+"printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure";
+// TRANSLATORS: Marker Fuser Timing Failure
+"printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure";
+// TRANSLATORS: Marker Ink Almost Empty
+"printer-state-reasons.marker-ink-almost-empty" = "Marker Ink Almost Empty";
+// TRANSLATORS: Marker Ink Empty
+"printer-state-reasons.marker-ink-empty" = "Marker Ink Empty";
+// TRANSLATORS: Marker Ink Missing
+"printer-state-reasons.marker-ink-missing" = "printer-state-reasons.marker-ink-missing";
+// TRANSLATORS: Marker Opc Missing
+"printer-state-reasons.marker-opc-missing" = "printer-state-reasons.marker-opc-missing";
+// TRANSLATORS: Marker Print Ribbon Almost Empty
+"printer-state-reasons.marker-print-ribbon-almost-empty" = "Marker Print Ribbon Almost Empty";
+// TRANSLATORS: Marker Print Ribbon Empty
+"printer-state-reasons.marker-print-ribbon-empty" = "Marker Print Ribbon Empty";
+// TRANSLATORS: Marker Print Ribbon Missing
+"printer-state-reasons.marker-print-ribbon-missing" = "printer-state-reasons.marker-print-ribbon-missing";
+// TRANSLATORS: Marker Supply Almost Empty
+"printer-state-reasons.marker-supply-almost-empty" = "printer-state-reasons.marker-supply-almost-empty";
+// TRANSLATORS: Ink/toner empty
+"printer-state-reasons.marker-supply-empty" = "Marker Supply Empty";
+// TRANSLATORS: Ink/toner low
+"printer-state-reasons.marker-supply-low" = "Marker Supply Low";
+// TRANSLATORS: Marker Supply Missing
+"printer-state-reasons.marker-supply-missing" = "printer-state-reasons.marker-supply-missing";
+// TRANSLATORS: Marker Toner Cartridge Missing
+"printer-state-reasons.marker-toner-cartridge-missing" = "Marker Toner Cartridge Missing";
+// TRANSLATORS: Marker Toner Missing
+"printer-state-reasons.marker-toner-missing" = "printer-state-reasons.marker-toner-missing";
+// TRANSLATORS: Ink/toner waste bin almost full
+"printer-state-reasons.marker-waste-almost-full" = "Marker Waste Almost Full";
+// TRANSLATORS: Ink/toner waste bin full
+"printer-state-reasons.marker-waste-full" = "Marker Waste Full";
+// TRANSLATORS: Marker Waste Ink Receptacle Almost Full
+"printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full";
+// TRANSLATORS: Marker Waste Ink Receptacle Full
+"printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full";
+// TRANSLATORS: Marker Waste Ink Receptacle Missing
+"printer-state-reasons.marker-waste-ink-receptacle-missing" = "printer-state-reasons.marker-waste-ink-receptacle-missing";
+// TRANSLATORS: Marker Waste Missing
+"printer-state-reasons.marker-waste-missing" = "printer-state-reasons.marker-waste-missing";
+// TRANSLATORS: Marker Waste Toner Receptacle Almost Full
+"printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full";
+// TRANSLATORS: Marker Waste Toner Receptacle Full
+"printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full";
+// TRANSLATORS: Marker Waste Toner Receptacle Missing
+"printer-state-reasons.marker-waste-toner-receptacle-missing" = "printer-state-reasons.marker-waste-toner-receptacle-missing";
+// TRANSLATORS: Material Empty
+"printer-state-reasons.material-empty" = "Material Empty";
+// TRANSLATORS: Material Low
+"printer-state-reasons.material-low" = "Material Low";
+// TRANSLATORS: Material Needed
+"printer-state-reasons.material-needed" = "Material Needed";
+// TRANSLATORS: Media Drying
+"printer-state-reasons.media-drying" = "Media Drying";
+// TRANSLATORS: Paper tray is empty
+"printer-state-reasons.media-empty" = "Media Empty";
+// TRANSLATORS: Paper jam
+"printer-state-reasons.media-jam" = "Media Jam";
+// TRANSLATORS: Paper tray is almost empty
+"printer-state-reasons.media-low" = "Paper tray is almost empty";
+// TRANSLATORS: Load paper
+"printer-state-reasons.media-needed" = "Load paper";
+// TRANSLATORS: Media Path Cannot Do 2-Sided Printing
+"printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing";
+// TRANSLATORS: Media Path Failure
+"printer-state-reasons.media-path-failure" = "Media Path Failure";
+// TRANSLATORS: Media Path Input Empty
+"printer-state-reasons.media-path-input-empty" = "Media Path Input Empty";
+// TRANSLATORS: Media Path Input Feed Error
+"printer-state-reasons.media-path-input-feed-error" = "Media Path Input Feed Error";
+// TRANSLATORS: Media Path Input Jam
+"printer-state-reasons.media-path-input-jam" = "Media Path Input Jam";
+// TRANSLATORS: Media Path Input Request
+"printer-state-reasons.media-path-input-request" = "Media Path Input Request";
+// TRANSLATORS: Media Path Jam
+"printer-state-reasons.media-path-jam" = "Media Path Jam";
+// TRANSLATORS: Media Path Media Tray Almost Full
+"printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full";
+// TRANSLATORS: Media Path Media Tray Full
+"printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full";
+// TRANSLATORS: Media Path Media Tray Missing
+"printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing";
+// TRANSLATORS: Media Path Output Feed Error
+"printer-state-reasons.media-path-output-feed-error" = "Media Path Output Feed Error";
+// TRANSLATORS: Media Path Output Full
+"printer-state-reasons.media-path-output-full" = "Media Path Output Full";
+// TRANSLATORS: Media Path Output Jam
+"printer-state-reasons.media-path-output-jam" = "Media Path Output Jam";
+// TRANSLATORS: Media Path Pick Roller Failure
+"printer-state-reasons.media-path-pick-roller-failure" = "Media Path Pick Roller Failure";
+// TRANSLATORS: Media Path Pick Roller Life Over
+"printer-state-reasons.media-path-pick-roller-life-over" = "Media Path Pick Roller Life Over";
+// TRANSLATORS: Media Path Pick Roller Life Warn
+"printer-state-reasons.media-path-pick-roller-life-warn" = "Media Path Pick Roller Life Warn";
+// TRANSLATORS: Media Path Pick Roller Missing
+"printer-state-reasons.media-path-pick-roller-missing" = "Media Path Pick Roller Missing";
+// TRANSLATORS: Motor Failure
+"printer-state-reasons.motor-failure" = "Motor Failure";
+// TRANSLATORS: Printer going offline
+"printer-state-reasons.moving-to-paused" = "Moving To Paused";
+// TRANSLATORS: None
+"printer-state-reasons.none" = "None";
+// TRANSLATORS: Optical Photoconductor Life Over
+"printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over";
+// TRANSLATORS: OPC almost at end-of-life
+"printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life";
+// TRANSLATORS: Check the printer for errors
+"printer-state-reasons.other" = "Other";
+// TRANSLATORS: Output bin is almost full
+"printer-state-reasons.output-area-almost-full" = "Output Area Almost Full";
+// TRANSLATORS: Output bin is full
+"printer-state-reasons.output-area-full" = "Output Area Full";
+// TRANSLATORS: Output Mailbox Select Failure
+"printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure";
+// TRANSLATORS: Output Media Tray Failure
+"printer-state-reasons.output-media-tray-failure" = "Output Media Tray Failure";
+// TRANSLATORS: Output Media Tray Feed Error
+"printer-state-reasons.output-media-tray-feed-error" = "Output Media Tray Feed Error";
+// TRANSLATORS: Output Media Tray Jam
+"printer-state-reasons.output-media-tray-jam" = "Output Media Tray Jam";
+// TRANSLATORS: Output tray is missing
+"printer-state-reasons.output-tray-missing" = "Output Tray Missing";
+// TRANSLATORS: Paused
+"printer-state-reasons.paused" = "Paused";
+// TRANSLATORS: Perforater Added
+"printer-state-reasons.perforater-added" = "Perforater Added";
+// TRANSLATORS: Perforater Almost Empty
+"printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty";
+// TRANSLATORS: Perforater Almost Full
+"printer-state-reasons.perforater-almost-full" = "Perforater Almost Full";
+// TRANSLATORS: Perforater At Limit
+"printer-state-reasons.perforater-at-limit" = "Perforater At Limit";
+// TRANSLATORS: Perforater Closed
+"printer-state-reasons.perforater-closed" = "Perforater Closed";
+// TRANSLATORS: Perforater Configuration Change
+"printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change";
+// TRANSLATORS: Perforater Cover Closed
+"printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed";
+// TRANSLATORS: Perforater Cover Open
+"printer-state-reasons.perforater-cover-open" = "Perforater Cover Open";
+// TRANSLATORS: Perforater Empty
+"printer-state-reasons.perforater-empty" = "Perforater Empty";
+// TRANSLATORS: Perforater Full
+"printer-state-reasons.perforater-full" = "Perforater Full";
+// TRANSLATORS: Perforater Interlock Closed
+"printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed";
+// TRANSLATORS: Perforater Interlock Open
+"printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open";
+// TRANSLATORS: Perforater Jam
+"printer-state-reasons.perforater-jam" = "Perforater Jam";
+// TRANSLATORS: Perforater Life Almost Over
+"printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over";
+// TRANSLATORS: Perforater Life Over
+"printer-state-reasons.perforater-life-over" = "Perforater Life Over";
+// TRANSLATORS: Perforater Memory Exhausted
+"printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted";
+// TRANSLATORS: Perforater Missing
+"printer-state-reasons.perforater-missing" = "Perforater Missing";
+// TRANSLATORS: Perforater Motor Failure
+"printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure";
+// TRANSLATORS: Perforater Near Limit
+"printer-state-reasons.perforater-near-limit" = "Perforater Near Limit";
+// TRANSLATORS: Perforater Offline
+"printer-state-reasons.perforater-offline" = "Perforater Offline";
+// TRANSLATORS: Perforater Opened
+"printer-state-reasons.perforater-opened" = "Perforater Opened";
+// TRANSLATORS: Perforater Over Temperature
+"printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature";
+// TRANSLATORS: Perforater Power Saver
+"printer-state-reasons.perforater-power-saver" = "Perforater Power Saver";
+// TRANSLATORS: Perforater Recoverable Failure
+"printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure";
+// TRANSLATORS: Perforater Recoverable Storage
+"printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage";
+// TRANSLATORS: Perforater Removed
+"printer-state-reasons.perforater-removed" = "Perforater Removed";
+// TRANSLATORS: Perforater Resource Added
+"printer-state-reasons.perforater-resource-added" = "Perforater Resource Added";
+// TRANSLATORS: Perforater Resource Removed
+"printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed";
+// TRANSLATORS: Perforater Thermistor Failure
+"printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure";
+// TRANSLATORS: Perforater Timing Failure
+"printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure";
+// TRANSLATORS: Perforater Turned Off
+"printer-state-reasons.perforater-turned-off" = "Perforater Turned Off";
+// TRANSLATORS: Perforater Turned On
+"printer-state-reasons.perforater-turned-on" = "Perforater Turned On";
+// TRANSLATORS: Perforater Under Temperature
+"printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature";
+// TRANSLATORS: Perforater Unrecoverable Failure
+"printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure";
+// TRANSLATORS: Perforater Unrecoverable Storage Error
+"printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error";
+// TRANSLATORS: Perforater Warming Up
+"printer-state-reasons.perforater-warming-up" = "Perforater Warming Up";
+// TRANSLATORS: Platform Cooling
+"printer-state-reasons.platform-cooling" = "Platform Cooling";
+// TRANSLATORS: Platform Failure
+"printer-state-reasons.platform-failure" = "Platform Failure";
+// TRANSLATORS: Platform Heating
+"printer-state-reasons.platform-heating" = "Platform Heating";
+// TRANSLATORS: Platform Temperature High
+"printer-state-reasons.platform-temperature-high" = "Platform Temperature High";
+// TRANSLATORS: Platform Temperature Low
+"printer-state-reasons.platform-temperature-low" = "Platform Temperature Low";
+// TRANSLATORS: Power Down
+"printer-state-reasons.power-down" = "Power Down";
+// TRANSLATORS: Power Up
+"printer-state-reasons.power-up" = "Power Up";
+// TRANSLATORS: Printer Reset Manually
+"printer-state-reasons.printer-manual-reset" = "Printer Reset Manually";
+// TRANSLATORS: Printer Reset Remotely
+"printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely";
+// TRANSLATORS: Printer Ready To Print
+"printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print";
+// TRANSLATORS: Puncher Added
+"printer-state-reasons.puncher-added" = "Puncher Added";
+// TRANSLATORS: Puncher Almost Empty
+"printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty";
+// TRANSLATORS: Puncher Almost Full
+"printer-state-reasons.puncher-almost-full" = "Puncher Almost Full";
+// TRANSLATORS: Puncher At Limit
+"printer-state-reasons.puncher-at-limit" = "Puncher At Limit";
+// TRANSLATORS: Puncher Closed
+"printer-state-reasons.puncher-closed" = "Puncher Closed";
+// TRANSLATORS: Puncher Configuration Change
+"printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change";
+// TRANSLATORS: Puncher Cover Closed
+"printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed";
+// TRANSLATORS: Puncher Cover Open
+"printer-state-reasons.puncher-cover-open" = "Puncher Cover Open";
+// TRANSLATORS: Puncher Empty
+"printer-state-reasons.puncher-empty" = "Puncher Empty";
+// TRANSLATORS: Puncher Full
+"printer-state-reasons.puncher-full" = "Puncher Full";
+// TRANSLATORS: Puncher Interlock Closed
+"printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed";
+// TRANSLATORS: Puncher Interlock Open
+"printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open";
+// TRANSLATORS: Puncher Jam
+"printer-state-reasons.puncher-jam" = "Puncher Jam";
+// TRANSLATORS: Puncher Life Almost Over
+"printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over";
+// TRANSLATORS: Puncher Life Over
+"printer-state-reasons.puncher-life-over" = "Puncher Life Over";
+// TRANSLATORS: Puncher Memory Exhausted
+"printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted";
+// TRANSLATORS: Puncher Missing
+"printer-state-reasons.puncher-missing" = "Puncher Missing";
+// TRANSLATORS: Puncher Motor Failure
+"printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure";
+// TRANSLATORS: Puncher Near Limit
+"printer-state-reasons.puncher-near-limit" = "Puncher Near Limit";
+// TRANSLATORS: Puncher Offline
+"printer-state-reasons.puncher-offline" = "Puncher Offline";
+// TRANSLATORS: Puncher Opened
+"printer-state-reasons.puncher-opened" = "Puncher Opened";
+// TRANSLATORS: Puncher Over Temperature
+"printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature";
+// TRANSLATORS: Puncher Power Saver
+"printer-state-reasons.puncher-power-saver" = "Puncher Power Saver";
+// TRANSLATORS: Puncher Recoverable Failure
+"printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure";
+// TRANSLATORS: Puncher Recoverable Storage
+"printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage";
+// TRANSLATORS: Puncher Removed
+"printer-state-reasons.puncher-removed" = "Puncher Removed";
+// TRANSLATORS: Puncher Resource Added
+"printer-state-reasons.puncher-resource-added" = "Puncher Resource Added";
+// TRANSLATORS: Puncher Resource Removed
+"printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed";
+// TRANSLATORS: Puncher Thermistor Failure
+"printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure";
+// TRANSLATORS: Puncher Timing Failure
+"printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure";
+// TRANSLATORS: Puncher Turned Off
+"printer-state-reasons.puncher-turned-off" = "Puncher Turned Off";
+// TRANSLATORS: Puncher Turned On
+"printer-state-reasons.puncher-turned-on" = "Puncher Turned On";
+// TRANSLATORS: Puncher Under Temperature
+"printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature";
+// TRANSLATORS: Puncher Unrecoverable Failure
+"printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure";
+// TRANSLATORS: Puncher Unrecoverable Storage Error
+"printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error";
+// TRANSLATORS: Puncher Warming Up
+"printer-state-reasons.puncher-warming-up" = "Puncher Warming Up";
+// TRANSLATORS: Separation Cutter Added
+"printer-state-reasons.separation-cutter-added" = "Separation Cutter Added";
+// TRANSLATORS: Separation Cutter Almost Empty
+"printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty";
+// TRANSLATORS: Separation Cutter Almost Full
+"printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full";
+// TRANSLATORS: Separation Cutter At Limit
+"printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit";
+// TRANSLATORS: Separation Cutter Closed
+"printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed";
+// TRANSLATORS: Separation Cutter Configuration Change
+"printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change";
+// TRANSLATORS: Separation Cutter Cover Closed
+"printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed";
+// TRANSLATORS: Separation Cutter Cover Open
+"printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open";
+// TRANSLATORS: Separation Cutter Empty
+"printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty";
+// TRANSLATORS: Separation Cutter Full
+"printer-state-reasons.separation-cutter-full" = "Separation Cutter Full";
+// TRANSLATORS: Separation Cutter Interlock Closed
+"printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed";
+// TRANSLATORS: Separation Cutter Interlock Open
+"printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open";
+// TRANSLATORS: Separation Cutter Jam
+"printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam";
+// TRANSLATORS: Separation Cutter Life Almost Over
+"printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over";
+// TRANSLATORS: Separation Cutter Life Over
+"printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over";
+// TRANSLATORS: Separation Cutter Memory Exhausted
+"printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted";
+// TRANSLATORS: Separation Cutter Missing
+"printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing";
+// TRANSLATORS: Separation Cutter Motor Failure
+"printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure";
+// TRANSLATORS: Separation Cutter Near Limit
+"printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit";
+// TRANSLATORS: Separation Cutter Offline
+"printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline";
+// TRANSLATORS: Separation Cutter Opened
+"printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened";
+// TRANSLATORS: Separation Cutter Over Temperature
+"printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature";
+// TRANSLATORS: Separation Cutter Power Saver
+"printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver";
+// TRANSLATORS: Separation Cutter Recoverable Failure
+"printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure";
+// TRANSLATORS: Separation Cutter Recoverable Storage
+"printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage";
+// TRANSLATORS: Separation Cutter Removed
+"printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed";
+// TRANSLATORS: Separation Cutter Resource Added
+"printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added";
+// TRANSLATORS: Separation Cutter Resource Removed
+"printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed";
+// TRANSLATORS: Separation Cutter Thermistor Failure
+"printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure";
+// TRANSLATORS: Separation Cutter Timing Failure
+"printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure";
+// TRANSLATORS: Separation Cutter Turned Off
+"printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off";
+// TRANSLATORS: Separation Cutter Turned On
+"printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On";
+// TRANSLATORS: Separation Cutter Under Temperature
+"printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature";
+// TRANSLATORS: Separation Cutter Unrecoverable Failure
+"printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure";
+// TRANSLATORS: Separation Cutter Unrecoverable Storage Error
+"printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error";
+// TRANSLATORS: Separation Cutter Warming Up
+"printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up";
+// TRANSLATORS: Sheet Rotator Added
+"printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added";
+// TRANSLATORS: Sheet Rotator Almost Empty
+"printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty";
+// TRANSLATORS: Sheet Rotator Almost Full
+"printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full";
+// TRANSLATORS: Sheet Rotator At Limit
+"printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit";
+// TRANSLATORS: Sheet Rotator Closed
+"printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed";
+// TRANSLATORS: Sheet Rotator Configuration Change
+"printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change";
+// TRANSLATORS: Sheet Rotator Cover Closed
+"printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed";
+// TRANSLATORS: Sheet Rotator Cover Open
+"printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open";
+// TRANSLATORS: Sheet Rotator Empty
+"printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty";
+// TRANSLATORS: Sheet Rotator Full
+"printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full";
+// TRANSLATORS: Sheet Rotator Interlock Closed
+"printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed";
+// TRANSLATORS: Sheet Rotator Interlock Open
+"printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open";
+// TRANSLATORS: Sheet Rotator Jam
+"printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam";
+// TRANSLATORS: Sheet Rotator Life Almost Over
+"printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over";
+// TRANSLATORS: Sheet Rotator Life Over
+"printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over";
+// TRANSLATORS: Sheet Rotator Memory Exhausted
+"printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted";
+// TRANSLATORS: Sheet Rotator Missing
+"printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing";
+// TRANSLATORS: Sheet Rotator Motor Failure
+"printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure";
+// TRANSLATORS: Sheet Rotator Near Limit
+"printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit";
+// TRANSLATORS: Sheet Rotator Offline
+"printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline";
+// TRANSLATORS: Sheet Rotator Opened
+"printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened";
+// TRANSLATORS: Sheet Rotator Over Temperature
+"printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature";
+// TRANSLATORS: Sheet Rotator Power Saver
+"printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver";
+// TRANSLATORS: Sheet Rotator Recoverable Failure
+"printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure";
+// TRANSLATORS: Sheet Rotator Recoverable Storage
+"printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage";
+// TRANSLATORS: Sheet Rotator Removed
+"printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed";
+// TRANSLATORS: Sheet Rotator Resource Added
+"printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added";
+// TRANSLATORS: Sheet Rotator Resource Removed
+"printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed";
+// TRANSLATORS: Sheet Rotator Thermistor Failure
+"printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure";
+// TRANSLATORS: Sheet Rotator Timing Failure
+"printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure";
+// TRANSLATORS: Sheet Rotator Turned Off
+"printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off";
+// TRANSLATORS: Sheet Rotator Turned On
+"printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On";
+// TRANSLATORS: Sheet Rotator Under Temperature
+"printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature";
+// TRANSLATORS: Sheet Rotator Unrecoverable Failure
+"printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure";
+// TRANSLATORS: Sheet Rotator Unrecoverable Storage Error
+"printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error";
+// TRANSLATORS: Sheet Rotator Warming Up
+"printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up";
+// TRANSLATORS: Printer offline
+"printer-state-reasons.shutdown" = "Shutdown";
+// TRANSLATORS: Slitter Added
+"printer-state-reasons.slitter-added" = "Slitter Added";
+// TRANSLATORS: Slitter Almost Empty
+"printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty";
+// TRANSLATORS: Slitter Almost Full
+"printer-state-reasons.slitter-almost-full" = "Slitter Almost Full";
+// TRANSLATORS: Slitter At Limit
+"printer-state-reasons.slitter-at-limit" = "Slitter At Limit";
+// TRANSLATORS: Slitter Closed
+"printer-state-reasons.slitter-closed" = "Slitter Closed";
+// TRANSLATORS: Slitter Configuration Change
+"printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change";
+// TRANSLATORS: Slitter Cover Closed
+"printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed";
+// TRANSLATORS: Slitter Cover Open
+"printer-state-reasons.slitter-cover-open" = "Slitter Cover Open";
+// TRANSLATORS: Slitter Empty
+"printer-state-reasons.slitter-empty" = "Slitter Empty";
+// TRANSLATORS: Slitter Full
+"printer-state-reasons.slitter-full" = "Slitter Full";
+// TRANSLATORS: Slitter Interlock Closed
+"printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed";
+// TRANSLATORS: Slitter Interlock Open
+"printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open";
+// TRANSLATORS: Slitter Jam
+"printer-state-reasons.slitter-jam" = "Slitter Jam";
+// TRANSLATORS: Slitter Life Almost Over
+"printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over";
+// TRANSLATORS: Slitter Life Over
+"printer-state-reasons.slitter-life-over" = "Slitter Life Over";
+// TRANSLATORS: Slitter Memory Exhausted
+"printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted";
+// TRANSLATORS: Slitter Missing
+"printer-state-reasons.slitter-missing" = "Slitter Missing";
+// TRANSLATORS: Slitter Motor Failure
+"printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure";
+// TRANSLATORS: Slitter Near Limit
+"printer-state-reasons.slitter-near-limit" = "Slitter Near Limit";
+// TRANSLATORS: Slitter Offline
+"printer-state-reasons.slitter-offline" = "Slitter Offline";
+// TRANSLATORS: Slitter Opened
+"printer-state-reasons.slitter-opened" = "Slitter Opened";
+// TRANSLATORS: Slitter Over Temperature
+"printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature";
+// TRANSLATORS: Slitter Power Saver
+"printer-state-reasons.slitter-power-saver" = "Slitter Power Saver";
+// TRANSLATORS: Slitter Recoverable Failure
+"printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure";
+// TRANSLATORS: Slitter Recoverable Storage
+"printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage";
+// TRANSLATORS: Slitter Removed
+"printer-state-reasons.slitter-removed" = "Slitter Removed";
+// TRANSLATORS: Slitter Resource Added
+"printer-state-reasons.slitter-resource-added" = "Slitter Resource Added";
+// TRANSLATORS: Slitter Resource Removed
+"printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed";
+// TRANSLATORS: Slitter Thermistor Failure
+"printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure";
+// TRANSLATORS: Slitter Timing Failure
+"printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure";
+// TRANSLATORS: Slitter Turned Off
+"printer-state-reasons.slitter-turned-off" = "Slitter Turned Off";
+// TRANSLATORS: Slitter Turned On
+"printer-state-reasons.slitter-turned-on" = "Slitter Turned On";
+// TRANSLATORS: Slitter Under Temperature
+"printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature";
+// TRANSLATORS: Slitter Unrecoverable Failure
+"printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure";
+// TRANSLATORS: Slitter Unrecoverable Storage Error
+"printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error";
+// TRANSLATORS: Slitter Warming Up
+"printer-state-reasons.slitter-warming-up" = "Slitter Warming Up";
+// TRANSLATORS: Spool Area Full
+"printer-state-reasons.spool-area-full" = "Spool Area Full";
+// TRANSLATORS: Stacker Added
+"printer-state-reasons.stacker-added" = "Stacker Added";
+// TRANSLATORS: Stacker Almost Empty
+"printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty";
+// TRANSLATORS: Stacker Almost Full
+"printer-state-reasons.stacker-almost-full" = "Stacker Almost Full";
+// TRANSLATORS: Stacker At Limit
+"printer-state-reasons.stacker-at-limit" = "Stacker At Limit";
+// TRANSLATORS: Stacker Closed
+"printer-state-reasons.stacker-closed" = "Stacker Closed";
+// TRANSLATORS: Stacker Configuration Change
+"printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change";
+// TRANSLATORS: Stacker Cover Closed
+"printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed";
+// TRANSLATORS: Stacker Cover Open
+"printer-state-reasons.stacker-cover-open" = "Stacker Cover Open";
+// TRANSLATORS: Stacker Empty
+"printer-state-reasons.stacker-empty" = "Stacker Empty";
+// TRANSLATORS: Stacker Full
+"printer-state-reasons.stacker-full" = "Stacker Full";
+// TRANSLATORS: Stacker Interlock Closed
+"printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed";
+// TRANSLATORS: Stacker Interlock Open
+"printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open";
+// TRANSLATORS: Stacker Jam
+"printer-state-reasons.stacker-jam" = "Stacker Jam";
+// TRANSLATORS: Stacker Life Almost Over
+"printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over";
+// TRANSLATORS: Stacker Life Over
+"printer-state-reasons.stacker-life-over" = "Stacker Life Over";
+// TRANSLATORS: Stacker Memory Exhausted
+"printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted";
+// TRANSLATORS: Stacker Missing
+"printer-state-reasons.stacker-missing" = "Stacker Missing";
+// TRANSLATORS: Stacker Motor Failure
+"printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure";
+// TRANSLATORS: Stacker Near Limit
+"printer-state-reasons.stacker-near-limit" = "Stacker Near Limit";
+// TRANSLATORS: Stacker Offline
+"printer-state-reasons.stacker-offline" = "Stacker Offline";
+// TRANSLATORS: Stacker Opened
+"printer-state-reasons.stacker-opened" = "Stacker Opened";
+// TRANSLATORS: Stacker Over Temperature
+"printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature";
+// TRANSLATORS: Stacker Power Saver
+"printer-state-reasons.stacker-power-saver" = "Stacker Power Saver";
+// TRANSLATORS: Stacker Recoverable Failure
+"printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure";
+// TRANSLATORS: Stacker Recoverable Storage
+"printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage";
+// TRANSLATORS: Stacker Removed
+"printer-state-reasons.stacker-removed" = "Stacker Removed";
+// TRANSLATORS: Stacker Resource Added
+"printer-state-reasons.stacker-resource-added" = "Stacker Resource Added";
+// TRANSLATORS: Stacker Resource Removed
+"printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed";
+// TRANSLATORS: Stacker Thermistor Failure
+"printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure";
+// TRANSLATORS: Stacker Timing Failure
+"printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure";
+// TRANSLATORS: Stacker Turned Off
+"printer-state-reasons.stacker-turned-off" = "Stacker Turned Off";
+// TRANSLATORS: Stacker Turned On
+"printer-state-reasons.stacker-turned-on" = "Stacker Turned On";
+// TRANSLATORS: Stacker Under Temperature
+"printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature";
+// TRANSLATORS: Stacker Unrecoverable Failure
+"printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure";
+// TRANSLATORS: Stacker Unrecoverable Storage Error
+"printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error";
+// TRANSLATORS: Stacker Warming Up
+"printer-state-reasons.stacker-warming-up" = "Stacker Warming Up";
+// TRANSLATORS: Stapler Added
+"printer-state-reasons.stapler-added" = "Stapler Added";
+// TRANSLATORS: Stapler Almost Empty
+"printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty";
+// TRANSLATORS: Stapler Almost Full
+"printer-state-reasons.stapler-almost-full" = "Stapler Almost Full";
+// TRANSLATORS: Stapler At Limit
+"printer-state-reasons.stapler-at-limit" = "Stapler At Limit";
+// TRANSLATORS: Stapler Closed
+"printer-state-reasons.stapler-closed" = "Stapler Closed";
+// TRANSLATORS: Stapler Configuration Change
+"printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change";
+// TRANSLATORS: Stapler Cover Closed
+"printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed";
+// TRANSLATORS: Stapler Cover Open
+"printer-state-reasons.stapler-cover-open" = "Stapler Cover Open";
+// TRANSLATORS: Stapler Empty
+"printer-state-reasons.stapler-empty" = "Stapler Empty";
+// TRANSLATORS: Stapler Full
+"printer-state-reasons.stapler-full" = "Stapler Full";
+// TRANSLATORS: Stapler Interlock Closed
+"printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed";
+// TRANSLATORS: Stapler Interlock Open
+"printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open";
+// TRANSLATORS: Stapler Jam
+"printer-state-reasons.stapler-jam" = "Stapler Jam";
+// TRANSLATORS: Stapler Life Almost Over
+"printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over";
+// TRANSLATORS: Stapler Life Over
+"printer-state-reasons.stapler-life-over" = "Stapler Life Over";
+// TRANSLATORS: Stapler Memory Exhausted
+"printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted";
+// TRANSLATORS: Stapler Missing
+"printer-state-reasons.stapler-missing" = "Stapler Missing";
+// TRANSLATORS: Stapler Motor Failure
+"printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure";
+// TRANSLATORS: Stapler Near Limit
+"printer-state-reasons.stapler-near-limit" = "Stapler Near Limit";
+// TRANSLATORS: Stapler Offline
+"printer-state-reasons.stapler-offline" = "Stapler Offline";
+// TRANSLATORS: Stapler Opened
+"printer-state-reasons.stapler-opened" = "Stapler Opened";
+// TRANSLATORS: Stapler Over Temperature
+"printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature";
+// TRANSLATORS: Stapler Power Saver
+"printer-state-reasons.stapler-power-saver" = "Stapler Power Saver";
+// TRANSLATORS: Stapler Recoverable Failure
+"printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure";
+// TRANSLATORS: Stapler Recoverable Storage
+"printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage";
+// TRANSLATORS: Stapler Removed
+"printer-state-reasons.stapler-removed" = "Stapler Removed";
+// TRANSLATORS: Stapler Resource Added
+"printer-state-reasons.stapler-resource-added" = "Stapler Resource Added";
+// TRANSLATORS: Stapler Resource Removed
+"printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed";
+// TRANSLATORS: Stapler Thermistor Failure
+"printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure";
+// TRANSLATORS: Stapler Timing Failure
+"printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure";
+// TRANSLATORS: Stapler Turned Off
+"printer-state-reasons.stapler-turned-off" = "Stapler Turned Off";
+// TRANSLATORS: Stapler Turned On
+"printer-state-reasons.stapler-turned-on" = "Stapler Turned On";
+// TRANSLATORS: Stapler Under Temperature
+"printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature";
+// TRANSLATORS: Stapler Unrecoverable Failure
+"printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure";
+// TRANSLATORS: Stapler Unrecoverable Storage Error
+"printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error";
+// TRANSLATORS: Stapler Warming Up
+"printer-state-reasons.stapler-warming-up" = "Stapler Warming Up";
+// TRANSLATORS: Stitcher Added
+"printer-state-reasons.stitcher-added" = "Stitcher Added";
+// TRANSLATORS: Stitcher Almost Empty
+"printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty";
+// TRANSLATORS: Stitcher Almost Full
+"printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full";
+// TRANSLATORS: Stitcher At Limit
+"printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit";
+// TRANSLATORS: Stitcher Closed
+"printer-state-reasons.stitcher-closed" = "Stitcher Closed";
+// TRANSLATORS: Stitcher Configuration Change
+"printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change";
+// TRANSLATORS: Stitcher Cover Closed
+"printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed";
+// TRANSLATORS: Stitcher Cover Open
+"printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open";
+// TRANSLATORS: Stitcher Empty
+"printer-state-reasons.stitcher-empty" = "Stitcher Empty";
+// TRANSLATORS: Stitcher Full
+"printer-state-reasons.stitcher-full" = "Stitcher Full";
+// TRANSLATORS: Stitcher Interlock Closed
+"printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed";
+// TRANSLATORS: Stitcher Interlock Open
+"printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open";
+// TRANSLATORS: Stitcher Jam
+"printer-state-reasons.stitcher-jam" = "Stitcher Jam";
+// TRANSLATORS: Stitcher Life Almost Over
+"printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over";
+// TRANSLATORS: Stitcher Life Over
+"printer-state-reasons.stitcher-life-over" = "Stitcher Life Over";
+// TRANSLATORS: Stitcher Memory Exhausted
+"printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted";
+// TRANSLATORS: Stitcher Missing
+"printer-state-reasons.stitcher-missing" = "Stitcher Missing";
+// TRANSLATORS: Stitcher Motor Failure
+"printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure";
+// TRANSLATORS: Stitcher Near Limit
+"printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit";
+// TRANSLATORS: Stitcher Offline
+"printer-state-reasons.stitcher-offline" = "Stitcher Offline";
+// TRANSLATORS: Stitcher Opened
+"printer-state-reasons.stitcher-opened" = "Stitcher Opened";
+// TRANSLATORS: Stitcher Over Temperature
+"printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature";
+// TRANSLATORS: Stitcher Power Saver
+"printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver";
+// TRANSLATORS: Stitcher Recoverable Failure
+"printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure";
+// TRANSLATORS: Stitcher Recoverable Storage
+"printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage";
+// TRANSLATORS: Stitcher Removed
+"printer-state-reasons.stitcher-removed" = "Stitcher Removed";
+// TRANSLATORS: Stitcher Resource Added
+"printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added";
+// TRANSLATORS: Stitcher Resource Removed
+"printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed";
+// TRANSLATORS: Stitcher Thermistor Failure
+"printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure";
+// TRANSLATORS: Stitcher Timing Failure
+"printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure";
+// TRANSLATORS: Stitcher Turned Off
+"printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off";
+// TRANSLATORS: Stitcher Turned On
+"printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On";
+// TRANSLATORS: Stitcher Under Temperature
+"printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature";
+// TRANSLATORS: Stitcher Unrecoverable Failure
+"printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure";
+// TRANSLATORS: Stitcher Unrecoverable Storage Error
+"printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error";
+// TRANSLATORS: Stitcher Warming Up
+"printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up";
+// TRANSLATORS: Partially stopped
+"printer-state-reasons.stopped-partly" = "Stopped Partly";
+// TRANSLATORS: Stopping
+"printer-state-reasons.stopping" = "Stopping";
+// TRANSLATORS: Subunit Added
+"printer-state-reasons.subunit-added" = "Subunit Added";
+// TRANSLATORS: Subunit Almost Empty
+"printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty";
+// TRANSLATORS: Subunit Almost Full
+"printer-state-reasons.subunit-almost-full" = "Subunit Almost Full";
+// TRANSLATORS: Subunit At Limit
+"printer-state-reasons.subunit-at-limit" = "Subunit At Limit";
+// TRANSLATORS: Subunit Closed
+"printer-state-reasons.subunit-closed" = "Subunit Closed";
+// TRANSLATORS: Subunit Cooling Down
+"printer-state-reasons.subunit-cooling-down" = "Subunit Cooling Down";
+// TRANSLATORS: Subunit Empty
+"printer-state-reasons.subunit-empty" = "Subunit Empty";
+// TRANSLATORS: Subunit Full
+"printer-state-reasons.subunit-full" = "Subunit Full";
+// TRANSLATORS: Subunit Life Almost Over
+"printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over";
+// TRANSLATORS: Subunit Life Over
+"printer-state-reasons.subunit-life-over" = "Subunit Life Over";
+// TRANSLATORS: Subunit Memory Exhausted
+"printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted";
+// TRANSLATORS: Subunit Missing
+"printer-state-reasons.subunit-missing" = "Subunit Missing";
+// TRANSLATORS: Subunit Motor Failure
+"printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure";
+// TRANSLATORS: Subunit Near Limit
+"printer-state-reasons.subunit-near-limit" = "Subunit Near Limit";
+// TRANSLATORS: Subunit Offline
+"printer-state-reasons.subunit-offline" = "Subunit Offline";
+// TRANSLATORS: Subunit Opened
+"printer-state-reasons.subunit-opened" = "Subunit Opened";
+// TRANSLATORS: Subunit Over Temperature
+"printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature";
+// TRANSLATORS: Subunit Power Saver
+"printer-state-reasons.subunit-power-saver" = "Subunit Power Saver";
+// TRANSLATORS: Subunit Recoverable Failure
+"printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure";
+// TRANSLATORS: Subunit Recoverable Storage
+"printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage";
+// TRANSLATORS: Subunit Removed
+"printer-state-reasons.subunit-removed" = "Subunit Removed";
+// TRANSLATORS: Subunit Resource Added
+"printer-state-reasons.subunit-resource-added" = "Subunit Resource Added";
+// TRANSLATORS: Subunit Resource Removed
+"printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed";
+// TRANSLATORS: Subunit Thermistor Failure
+"printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure";
+// TRANSLATORS: Subunit Timing Failure
+"printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure";
+// TRANSLATORS: Subunit Turned Off
+"printer-state-reasons.subunit-turned-off" = "Subunit Turned Off";
+// TRANSLATORS: Subunit Turned On
+"printer-state-reasons.subunit-turned-on" = "Subunit Turned On";
+// TRANSLATORS: Subunit Under Temperature
+"printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature";
+// TRANSLATORS: Subunit Unrecoverable Failure
+"printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure";
+// TRANSLATORS: Subunit Unrecoverable Storage
+"printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage";
+// TRANSLATORS: Subunit Warming Up
+"printer-state-reasons.subunit-warming-up" = "Subunit Warming Up";
+// TRANSLATORS: Printer stopped responding
+"printer-state-reasons.timed-out" = "Timed Out";
+// TRANSLATORS: Out of toner
+"printer-state-reasons.toner-empty" = "Toner Empty";
+// TRANSLATORS: Toner low
+"printer-state-reasons.toner-low" = "Toner Low";
+// TRANSLATORS: Trimmer Added
+"printer-state-reasons.trimmer-added" = "Trimmer Added";
+// TRANSLATORS: Trimmer Almost Empty
+"printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty";
+// TRANSLATORS: Trimmer Almost Full
+"printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full";
+// TRANSLATORS: Trimmer At Limit
+"printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit";
+// TRANSLATORS: Trimmer Closed
+"printer-state-reasons.trimmer-closed" = "Trimmer Closed";
+// TRANSLATORS: Trimmer Configuration Change
+"printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change";
+// TRANSLATORS: Trimmer Cover Closed
+"printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed";
+// TRANSLATORS: Trimmer Cover Open
+"printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open";
+// TRANSLATORS: Trimmer Empty
+"printer-state-reasons.trimmer-empty" = "Trimmer Empty";
+// TRANSLATORS: Trimmer Full
+"printer-state-reasons.trimmer-full" = "Trimmer Full";
+// TRANSLATORS: Trimmer Interlock Closed
+"printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed";
+// TRANSLATORS: Trimmer Interlock Open
+"printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open";
+// TRANSLATORS: Trimmer Jam
+"printer-state-reasons.trimmer-jam" = "Trimmer Jam";
+// TRANSLATORS: Trimmer Life Almost Over
+"printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over";
+// TRANSLATORS: Trimmer Life Over
+"printer-state-reasons.trimmer-life-over" = "Trimmer Life Over";
+// TRANSLATORS: Trimmer Memory Exhausted
+"printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted";
+// TRANSLATORS: Trimmer Missing
+"printer-state-reasons.trimmer-missing" = "Trimmer Missing";
+// TRANSLATORS: Trimmer Motor Failure
+"printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure";
+// TRANSLATORS: Trimmer Near Limit
+"printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit";
+// TRANSLATORS: Trimmer Offline
+"printer-state-reasons.trimmer-offline" = "Trimmer Offline";
+// TRANSLATORS: Trimmer Opened
+"printer-state-reasons.trimmer-opened" = "Trimmer Opened";
+// TRANSLATORS: Trimmer Over Temperature
+"printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature";
+// TRANSLATORS: Trimmer Power Saver
+"printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver";
+// TRANSLATORS: Trimmer Recoverable Failure
+"printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure";
+// TRANSLATORS: Trimmer Recoverable Storage
+"printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage";
+// TRANSLATORS: Trimmer Removed
+"printer-state-reasons.trimmer-removed" = "Trimmer Removed";
+// TRANSLATORS: Trimmer Resource Added
+"printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added";
+// TRANSLATORS: Trimmer Resource Removed
+"printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed";
+// TRANSLATORS: Trimmer Thermistor Failure
+"printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure";
+// TRANSLATORS: Trimmer Timing Failure
+"printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure";
+// TRANSLATORS: Trimmer Turned Off
+"printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off";
+// TRANSLATORS: Trimmer Turned On
+"printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On";
+// TRANSLATORS: Trimmer Under Temperature
+"printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature";
+// TRANSLATORS: Trimmer Unrecoverable Failure
+"printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure";
+// TRANSLATORS: Trimmer Unrecoverable Storage Error
+"printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error";
+// TRANSLATORS: Trimmer Warming Up
+"printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up";
+// TRANSLATORS: Unknown
+"printer-state-reasons.unknown" = "Unknown";
+// TRANSLATORS: Wrapper Added
+"printer-state-reasons.wrapper-added" = "Wrapper Added";
+// TRANSLATORS: Wrapper Almost Empty
+"printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty";
+// TRANSLATORS: Wrapper Almost Full
+"printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full";
+// TRANSLATORS: Wrapper At Limit
+"printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit";
+// TRANSLATORS: Wrapper Closed
+"printer-state-reasons.wrapper-closed" = "Wrapper Closed";
+// TRANSLATORS: Wrapper Configuration Change
+"printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change";
+// TRANSLATORS: Wrapper Cover Closed
+"printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed";
+// TRANSLATORS: Wrapper Cover Open
+"printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open";
+// TRANSLATORS: Wrapper Empty
+"printer-state-reasons.wrapper-empty" = "Wrapper Empty";
+// TRANSLATORS: Wrapper Full
+"printer-state-reasons.wrapper-full" = "Wrapper Full";
+// TRANSLATORS: Wrapper Interlock Closed
+"printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed";
+// TRANSLATORS: Wrapper Interlock Open
+"printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open";
+// TRANSLATORS: Wrapper Jam
+"printer-state-reasons.wrapper-jam" = "Wrapper Jam";
+// TRANSLATORS: Wrapper Life Almost Over
+"printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over";
+// TRANSLATORS: Wrapper Life Over
+"printer-state-reasons.wrapper-life-over" = "Wrapper Life Over";
+// TRANSLATORS: Wrapper Memory Exhausted
+"printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted";
+// TRANSLATORS: Wrapper Missing
+"printer-state-reasons.wrapper-missing" = "Wrapper Missing";
+// TRANSLATORS: Wrapper Motor Failure
+"printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure";
+// TRANSLATORS: Wrapper Near Limit
+"printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit";
+// TRANSLATORS: Wrapper Offline
+"printer-state-reasons.wrapper-offline" = "Wrapper Offline";
+// TRANSLATORS: Wrapper Opened
+"printer-state-reasons.wrapper-opened" = "Wrapper Opened";
+// TRANSLATORS: Wrapper Over Temperature
+"printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature";
+// TRANSLATORS: Wrapper Power Saver
+"printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver";
+// TRANSLATORS: Wrapper Recoverable Failure
+"printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure";
+// TRANSLATORS: Wrapper Recoverable Storage
+"printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage";
+// TRANSLATORS: Wrapper Removed
+"printer-state-reasons.wrapper-removed" = "Wrapper Removed";
+// TRANSLATORS: Wrapper Resource Added
+"printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added";
+// TRANSLATORS: Wrapper Resource Removed
+"printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed";
+// TRANSLATORS: Wrapper Thermistor Failure
+"printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure";
+// TRANSLATORS: Wrapper Timing Failure
+"printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure";
+// TRANSLATORS: Wrapper Turned Off
+"printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off";
+// TRANSLATORS: Wrapper Turned On
+"printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On";
+// TRANSLATORS: Wrapper Under Temperature
+"printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature";
+// TRANSLATORS: Wrapper Unrecoverable Failure
+"printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure";
+// TRANSLATORS: Wrapper Unrecoverable Storage Error
+"printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error";
+// TRANSLATORS: Wrapper Warming Up
+"printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up";
+// TRANSLATORS: Idle
+"printer-state.3" = "Idle";
+// TRANSLATORS: Processing
+"printer-state.4" = "Processing";
+// TRANSLATORS: Stopped
+"printer-state.5" = "Stopped";
+// TRANSLATORS: Printer Uptime
+"printer-up-time" = "Printer Uptime";
"processing" = "processing";
+// TRANSLATORS: Proof Print
+"proof-print" = "Proof Print";
+// TRANSLATORS: Proof Print Copies
+"proof-print-copies" = "Proof Print Copies";
+// TRANSLATORS: Punching
+"punching" = "Punching";
+// TRANSLATORS: Punching Locations
+"punching-locations" = "Punching Locations";
+// TRANSLATORS: Punching Offset
+"punching-offset" = "Punching Offset";
+// TRANSLATORS: Punch Edge
+"punching-reference-edge" = "Punch Edge";
+// TRANSLATORS: Bottom
+"punching-reference-edge.bottom" = "Bottom";
+// TRANSLATORS: Left
+"punching-reference-edge.left" = "Left";
+// TRANSLATORS: Right
+"punching-reference-edge.right" = "Right";
+// TRANSLATORS: Top
+"punching-reference-edge.top" = "Top";
"request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))";
"request-id uses indefinite length" = "request-id uses indefinite length";
+// TRANSLATORS: Requested Attributes
+"requested-attributes" = "Requested Attributes";
+// TRANSLATORS: Retry Interval
+"retry-interval" = "Retry Interval";
+// TRANSLATORS: Retry Timeout
+"retry-time-out" = "Retry Timeout";
+// TRANSLATORS: Save Disposition
+"save-disposition" = "Save Disposition";
+// TRANSLATORS: None
+"save-disposition.none" = "None";
+// TRANSLATORS: Print and Save
+"save-disposition.print-save" = "Print and Save";
+// TRANSLATORS: Save Only
+"save-disposition.save-only" = "Save Only";
+// TRANSLATORS: Save Document Format
+"save-document-format" = "Save Document Format";
+// TRANSLATORS: Save Info
+"save-info" = "Save Info";
+// TRANSLATORS: Save Location
+"save-location" = "Save Location";
+// TRANSLATORS: Save Name
+"save-name" = "Save Name";
"scheduler is not running" = "scheduler is not running";
"scheduler is running" = "scheduler is running";
+// TRANSLATORS: Separator Sheets
+"separator-sheets" = "Separator Sheets";
+// TRANSLATORS: Type of Separator Sheets
+"separator-sheets-type" = "Type of Separator Sheets";
+// TRANSLATORS: Start and End Sheets
+"separator-sheets-type.both-sheets" = "Start and End Sheets";
+// TRANSLATORS: End Sheet
+"separator-sheets-type.end-sheet" = "End Sheet";
+// TRANSLATORS: None
+"separator-sheets-type.none" = "None";
+// TRANSLATORS: Slip Sheets
+"separator-sheets-type.slip-sheets" = "Slip Sheets";
+// TRANSLATORS: Start Sheet
+"separator-sheets-type.start-sheet" = "Start Sheet";
+// TRANSLATORS: 2-Sided Printing
+"sides" = "2-Sided Printing";
+// TRANSLATORS: Off
+"sides.one-sided" = "Off";
+// TRANSLATORS: On (Portrait)
+"sides.two-sided-long-edge" = "On (Portrait)";
+// TRANSLATORS: On (Landscape)
+"sides.two-sided-short-edge" = "On (Landscape)";
"stat of %s failed: %s" = "stat of %s failed: %s";
"status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue.";
+// TRANSLATORS: Status Message
+"status-message" = "Status Message";
+// TRANSLATORS: Staple
+"stitching" = "Staple";
+// TRANSLATORS: Stitching Angle
+"stitching-angle" = "Stitching Angle";
+// TRANSLATORS: Stitching Locations
+"stitching-locations" = "Stitching Locations";
+// TRANSLATORS: Staple Method
+"stitching-method" = "Staple Method";
+// TRANSLATORS: Automatic
+"stitching-method.auto" = "Automatic";
+// TRANSLATORS: Crimp
+"stitching-method.crimp" = "Crimp";
+// TRANSLATORS: Wire
+"stitching-method.wire" = "Wire";
+// TRANSLATORS: Stitching Offset
+"stitching-offset" = "Stitching Offset";
+// TRANSLATORS: Staple Edge
+"stitching-reference-edge" = "Staple Edge";
+// TRANSLATORS: Bottom
+"stitching-reference-edge.bottom" = "Bottom";
+// TRANSLATORS: Left
+"stitching-reference-edge.left" = "Left";
+// TRANSLATORS: Right
+"stitching-reference-edge.right" = "Right";
+// TRANSLATORS: Top
+"stitching-reference-edge.top" = "Top";
"stopped" = "stopped";
+// TRANSLATORS: Subject
+"subject" = "Subject";
+// TRANSLATORS: Subscription Privacy Attributes
+"subscription-privacy-attributes" = "Subscription Privacy Attributes";
+// TRANSLATORS: All
+"subscription-privacy-attributes.all" = "All";
+// TRANSLATORS: Default
+"subscription-privacy-attributes.default" = "Default";
+// TRANSLATORS: None
+"subscription-privacy-attributes.none" = "None";
+// TRANSLATORS: Subscription Description
+"subscription-privacy-attributes.subscription-description" = "Subscription Description";
+// TRANSLATORS: Subscription Template
+"subscription-privacy-attributes.subscription-template" = "Subscription Template";
+// TRANSLATORS: Subscription Privacy Scope
+"subscription-privacy-scope" = "Subscription Privacy Scope";
+// TRANSLATORS: All
+"subscription-privacy-scope.all" = "All";
+// TRANSLATORS: Default
+"subscription-privacy-scope.default" = "Default";
+// TRANSLATORS: None
+"subscription-privacy-scope.none" = "None";
+// TRANSLATORS: Owner
+"subscription-privacy-scope.owner" = "Owner";
"system default destination: %s" = "system default destination: %s";
"system default destination: %s/%s" = "system default destination: %s/%s";
+// TRANSLATORS: T33 Subaddress
+"t33-subaddress" = "T33 Subaddress";
+// TRANSLATORS: To Name
+"to-name" = "To Name";
+// TRANSLATORS: Transmission Status
+"transmission-status" = "Transmission Status";
+// TRANSLATORS: Pending
+"transmission-status.3" = "Pending";
+// TRANSLATORS: Pending Retry
+"transmission-status.4" = "Pending Retry";
+// TRANSLATORS: Processing
+"transmission-status.5" = "Processing";
+// TRANSLATORS: Canceled
+"transmission-status.7" = "Canceled";
+// TRANSLATORS: Aborted
+"transmission-status.8" = "Aborted";
+// TRANSLATORS: Completed
+"transmission-status.9" = "Completed";
+// TRANSLATORS: Cut
+"trimming" = "Cut";
+// TRANSLATORS: Cut Position
+"trimming-offset" = "Cut Position";
+// TRANSLATORS: Cut Edge
+"trimming-reference-edge" = "Cut Edge";
+// TRANSLATORS: Bottom
+"trimming-reference-edge.bottom" = "Bottom";
+// TRANSLATORS: Left
+"trimming-reference-edge.left" = "Left";
+// TRANSLATORS: Right
+"trimming-reference-edge.right" = "Right";
+// TRANSLATORS: Top
+"trimming-reference-edge.top" = "Top";
+// TRANSLATORS: Type of Cut
+"trimming-type" = "Type of Cut";
+// TRANSLATORS: Draw Line
+"trimming-type.draw-line" = "Draw Line";
+// TRANSLATORS: Full
+"trimming-type.full" = "Full";
+// TRANSLATORS: Partial
+"trimming-type.partial" = "Partial";
+// TRANSLATORS: Perforate
+"trimming-type.perforate" = "Perforate";
+// TRANSLATORS: Score
+"trimming-type.score" = "Score";
+// TRANSLATORS: Tab
+"trimming-type.tab" = "Tab";
+// TRANSLATORS: Cut After
+"trimming-when" = "Cut After";
+// TRANSLATORS: Every Document
+"trimming-when.after-documents" = "Every Document";
+// TRANSLATORS: Job
+"trimming-when.after-job" = "Job";
+// TRANSLATORS: Every Set
+"trimming-when.after-sets" = "Every Set";
+// TRANSLATORS: Every Page
+"trimming-when.after-sheets" = "Every Page";
"unknown" = "unknown";
"untitled" = "untitled";
"variable-bindings uses indefinite length" = "variable-bindings uses indefinite length";
+// TRANSLATORS: X Accuracy
+"x-accuracy" = "X Accuracy";
+// TRANSLATORS: X Dimension
+"x-dimension" = "X Dimension";
+// TRANSLATORS: X Offset
+"x-offset" = "X Offset";
+// TRANSLATORS: X Origin
+"x-origin" = "X Origin";
+// TRANSLATORS: Y Accuracy
+"y-accuracy" = "Y Accuracy";
+// TRANSLATORS: Y Dimension
+"y-dimension" = "Y Dimension";
+// TRANSLATORS: Y Offset
+"y-offset" = "Y Offset";
+// TRANSLATORS: Y Origin
+"y-origin" = "Y Origin";
+// TRANSLATORS: Z Accuracy
+"z-accuracy" = "Z Accuracy";
+// TRANSLATORS: Z Dimension
+"z-dimension" = "Z Dimension";
+// TRANSLATORS: Z Offset
+"z-offset" = "Z Offset";
+"{service_domain} Domain name" = "{service_domain} Domain name";
+"{service_hostname} Fully-qualified domain name" = "{service_hostname} Fully-qualified domain name";
+"{service_name} Service instance name" = "{service_name} Service instance name";
+"{service_port} Port number" = "{service_port} Port number";
+"{service_regtype} DNS-SD registration type" = "{service_regtype} DNS-SD registration type";
+"{service_scheme} URI scheme" = "{service_scheme} URI scheme";
+"{service_uri} URI" = "{service_uri} URI";
+"{txt_*} Value of TXT record key" = "{txt_*} Value of TXT record key";
+"{} URI" = "{} URI";
+"~/.cups/lpoptions file names default destination that does not exist." = "~/.cups/lpoptions file names default destination that does not exist.";
projects / thirdparty / cups.git / blobdiff