/*
- * "$Id: job.c 7902 2008-09-03 14:20:17Z mike $"
+ * Job management routines for the CUPS scheduler.
*
- * Job management routines for the CUPS scheduler.
+ * Copyright 2007-2016 by Apple Inc.
+ * Copyright 1997-2007 by Easy Software Products, all rights reserved.
*
- * Copyright 2007-2010 by Apple Inc.
- * Copyright 1997-2007 by Easy Software Products, all rights reserved.
- *
- * These coded instructions, statements, and computer programs are the
- * property of Apple Inc. and are protected by Federal copyright
- * law. Distribution and use rights are outlined in the file "LICENSE.txt"
- * which should have been included with this file. If this file is
- * file is missing or damaged, see the license at "http://www.cups.org/".
- *
- * Contents:
- *
- * cupsdAddJob() - Add a new job to the job queue.
- * cupsdCancelJobs() - Cancel all jobs for the given
- * destination/user.
- * cupsdCheckJobs() - Check the pending jobs and start any if the
- * destination is available.
- * cupsdCleanJobs() - Clean out old jobs.
- * cupsdContinueJob() - Continue printing with the next file in a job.
- * cupsdDeleteJob() - Free all memory used by a job.
- * cupsdFreeAllJobs() - Free all jobs from memory.
- * cupsdFindJob() - Find the specified job.
- * cupsdGetPrinterJobCount() - Get the number of pending, processing, or held
- * jobs in a printer or class.
- * cupsdGetUserJobCount() - Get the number of pending, processing, or held
- * jobs for a user.
- * cupsdLoadAllJobs() - Load all jobs from disk.
- * cupsdLoadJob() - Load a single job.
- * cupsdMoveJob() - Move the specified job to a different
- * destination.
- * cupsdReleaseJob() - Release the specified job.
- * cupsdRestartJob() - Restart the specified job.
- * cupsdSaveAllJobs() - Save a summary of all jobs to disk.
- * cupsdSaveJob() - Save a job to disk.
- * cupsdSetJobHoldUntil() - Set the hold time for a job.
- * cupsdSetJobPriority() - Set the priority of a job, moving it up/down
- * in the list as needed.
- * cupsdSetJobState() - Set the state of the specified print job.
- * cupsdStopAllJobs() - Stop all print jobs.
- * cupsdUnloadCompletedJobs() - Flush completed job history from memory.
- * compare_active_jobs() - Compare the job IDs and priorities of two
- * jobs.
- * compare_jobs() - Compare the job IDs of two jobs.
- * dump_job_history() - Dump any debug messages for a job.
- * free_job_history() - Free any log history.
- * finalize_job() - Cleanup after job filter processes and support
- * data.
- * get_options() - Get a string containing the job options.
- * ipp_length() - Compute the size of the buffer needed to hold
- * the textual IPP attributes.
- * load_job_cache() - Load jobs from the job.cache file.
- * load_next_job_id() - Load the NextJobId value from the job.cache
- * file.
- * load_request_root() - Load jobs from the RequestRoot directory.
- * set_hold_until() - Set the hold time and update job-hold-until
- * attribute.
- * set_time() - Set one of the "time-at-xyz" attributes.
- * start_job() - Start a print job.
- * stop_job() - Stop a print job.
- * unload_job() - Unload a job from memory.
- * update_job() - Read a status update from a job's filters.
- * update_job_attrs() - Update the job-printer-* attributes.
+ * These coded instructions, statements, and computer programs are the
+ * property of Apple Inc. and are protected by Federal copyright
+ * law. Distribution and use rights are outlined in the file "LICENSE.txt"
+ * which should have been included with this file. If this file is
+ * missing or damaged, see the license at "http://www.cups.org/".
*/
/*
#include <grp.h>
#include <cups/backend.h>
#include <cups/dir.h>
+#ifdef __APPLE__
+# include <IOKit/pwr_mgt/IOPMLib.h>
+# ifdef HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H
+# include <IOKit/pwr_mgt/IOPMLibPrivate.h>
+# endif /* HAVE_IOKIT_PWR_MGT_IOPMLIBPRIVATE_H */
+#endif /* __APPLE__ */
/*
*/
static int compare_active_jobs(void *first, void *second, void *data);
+static int compare_completed_jobs(void *first, void *second, void *data);
static int compare_jobs(void *first, void *second, void *data);
static void dump_job_history(cupsd_job_t *job);
static void finalize_job(cupsd_job_t *job, int set_job_state);
static void load_job_cache(const char *filename);
static void load_next_job_id(const char *filename);
static void load_request_root(void);
-static void set_hold_until(cupsd_job_t *job, time_t holdtime);
+static void remove_job_files(cupsd_job_t *job);
+static void remove_job_history(cupsd_job_t *job);
static void set_time(cupsd_job_t *job, const char *name);
static void start_job(cupsd_job_t *job, cupsd_printer_t *printer);
static void stop_job(cupsd_job_t *job, cupsd_jobaction_t action);
"Job canceled by user.");
}
}
-
- cupsdCheckJobs();
}
*pclass; /* Printer class destination */
ipp_attribute_t *attr; /* Job attribute */
time_t curtime; /* Current time */
+ const char *reasons; /* job-state-reasons value */
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "cupsdCheckJobs: %d active jobs, sleeping=%d, reload=%d",
- cupsArrayCount(ActiveJobs), Sleeping, NeedReload);
-
curtime = time(NULL);
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCheckJobs: %d active jobs, sleeping=%d, ac-power=%d, reload=%d, curtime=%ld", cupsArrayCount(ActiveJobs), Sleeping, ACPower, NeedReload, (long)curtime);
+
for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs);
job;
job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
{
+ cupsdLogMessage(CUPSD_LOG_DEBUG2,
+ "cupsdCheckJobs: Job %d - dest=\"%s\", printer=%p, "
+ "state=%d, cancel_time=%ld, hold_until=%ld, kill_time=%ld, "
+ "pending_cost=%d, pending_timeout=%ld", job->id, job->dest,
+ job->printer, job->state_value, (long)job->cancel_time,
+ (long)job->hold_until, (long)job->kill_time,
+ job->pending_cost, (long)job->pending_timeout);
+
/*
* Kill jobs if they are unresponsive...
*/
if (job->kill_time && job->kill_time <= curtime)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] Stopping unresponsive job!",
- job->id);
+ if (!job->completed)
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Stopping unresponsive job.");
stop_job(job, CUPSD_JOB_FORCE);
continue;
}
+ /*
+ * Cancel stuck jobs...
+ */
+
+ if (job->cancel_time && job->cancel_time <= curtime)
+ {
+ int cancel_after; /* job-cancel-after value */
+
+ attr = ippFindAttribute(job->attrs, "job-cancel-after", IPP_TAG_INTEGER);
+ cancel_after = attr ? ippGetInteger(attr, 0) : MaxJobTime;
+
+ if (job->completed)
+ cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_FORCE, "Marking stuck job as completed after %d seconds.", cancel_after);
+ else
+ cupsdSetJobState(job, IPP_JOB_CANCELED, CUPSD_JOB_DEFAULT, "Canceling stuck job after %d seconds.", cancel_after);
+ continue;
+ }
+
/*
* Start held jobs if they are ready...
*/
cupsd_client_t *con; /* Current client connection */
-
for (con = (cupsd_client_t *)cupsArrayFirst(Clients);
con;
con = (cupsd_client_t *)cupsArrayNext(Clients))
((FilterLevel + job->pending_cost) < FilterLimit || FilterLevel == 0))
cupsdContinueJob(job);
+ /*
+ * Skip jobs that where held-on-create
+ */
+
+ reasons = ippGetString(job->reasons, 0, NULL);
+ if (reasons && !strcmp(reasons, "job-held-on-create"))
+ {
+ /*
+ * Check whether the printer is still holding new jobs...
+ */
+
+ printer = cupsdFindDest(job->dest);
+
+ if (printer->holding_new_jobs)
+ continue;
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+ }
+
/*
* Start pending jobs if the destination is available...
*/
- if (job->state_value == IPP_JOB_PENDING && !NeedReload && !Sleeping &&
- !DoingShutdown && !job->printer)
+ if (job->state_value == IPP_JOB_PENDING && !NeedReload &&
+ (!Sleeping || ACPower) && !DoingShutdown && !job->printer)
{
printer = cupsdFindDest(job->dest);
pclass = NULL;
- while (printer &&
- (printer->type & (CUPS_PRINTER_IMPLICIT | CUPS_PRINTER_CLASS)))
+ while (printer && (printer->type & CUPS_PRINTER_CLASS))
{
/*
* If the class is remote, just pass it to the remote server...
"Job aborted because the destination printer/class "
"has gone away.");
}
- else if (printer && !printer->holding_new_jobs)
+ else if (printer)
{
/*
* See if the printer is available or remote and not printing a job;
if (pclass)
{
/*
- * Add/update a job-actual-printer-uri attribute for this job
+ * Add/update a job-printer-uri-actual attribute for this job
* so that we know which printer actually printed the job...
*/
- if ((attr = ippFindAttribute(job->attrs, "job-actual-printer-uri",
- IPP_TAG_URI)) != NULL)
- cupsdSetString(&attr->values[0].string.text, printer->uri);
+ if ((attr = ippFindAttribute(job->attrs, "job-printer-uri-actual", IPP_TAG_URI)) != NULL)
+ ippSetString(job->attrs, &attr, 0, printer->uri);
else
- ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_URI,
- "job-actual-printer-uri", NULL, printer->uri);
+ ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_URI, "job-printer-uri-actual", NULL, printer->uri);
job->dirty = 1;
cupsdMarkDirty(CUPSD_DIRTY_JOBS);
}
- if ((!(printer->type & CUPS_PRINTER_DISCOVERED) && /* Printer is local */
- printer->state == IPP_PRINTER_IDLE) || /* and idle, OR */
- ((printer->type & CUPS_PRINTER_DISCOVERED) && /* Printer is remote */
- !printer->job)) /* and not printing */
+ if (!printer->job && printer->state == IPP_PRINTER_IDLE)
{
/*
* Start the job...
*/
+ cupsArraySave(ActiveJobs);
start_job(job, printer);
+ cupsArrayRestore(ActiveJobs);
}
}
}
cupsdCleanJobs(void)
{
cupsd_job_t *job; /* Current job */
+ time_t curtime; /* Current time */
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2,
+ "cupsdCleanJobs: MaxJobs=%d, JobHistory=%d, JobFiles=%d",
+ MaxJobs, JobHistory, JobFiles);
- if (MaxJobs <= 0 && JobHistory)
+ if (MaxJobs <= 0 && JobHistory == INT_MAX && JobFiles == INT_MAX)
return;
+ curtime = time(NULL);
+ JobHistoryUpdate = 0;
+
for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
- job && (cupsArrayCount(Jobs) >= MaxJobs || !JobHistory);
+ job;
job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ {
if (job->state_value >= IPP_JOB_CANCELED && !job->printer)
- cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ {
+ /*
+ * Expire old jobs (or job files)...
+ */
+
+ if ((MaxJobs > 0 && cupsArrayCount(Jobs) >= MaxJobs) ||
+ (job->history_time && job->history_time <= curtime))
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing from history.");
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ }
+ else if (job->file_time && job->file_time <= curtime)
+ {
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Removing document files.");
+ remove_job_files(job);
+
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
+ }
+ else
+ {
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
+
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
+ }
+ }
+ }
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdCleanJobs: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
}
int filterfds[2][2] = { { -1, -1 }, { -1, -1 } };
/* Pipes used between filters */
int envc; /* Number of environment variables */
+ struct stat fileinfo; /* Job file information */
+ int argc = 0; /* Number of arguments */
char **argv = NULL, /* Filter command-line arguments */
filename[1024], /* Job filename */
command[1024], /* Full path to command */
/* Job title string */
copies[255], /* # copies string */
*options, /* Options string */
- *envp[MAX_ENV + 19],
+ *envp[MAX_ENV + 21],
/* Environment variables */
charset[255], /* CHARSET env variable */
class_name[255],/* CLASS env variable */
/* CONTENT_TYPE env variable */
device_uri[1024],
/* DEVICE_URI env variable */
- final_content_type[1024],
+ final_content_type[1024] = "",
/* FINAL_CONTENT_TYPE env variable */
lang[255], /* LANG env variable */
#ifdef __APPLE__
apple_language[255],
/* APPLE_LANGUAGE env variable */
#endif /* __APPLE__ */
+ auth_info_required[255],
+ /* AUTH_INFO_REQUIRED env variable */
ppd[1024], /* PPD env variable */
printer_info[255],
/* PRINTER_INFO env variable */
/* PRINTER_LOCATION env variable */
printer_name[255],
/* PRINTER env variable */
+ *printer_state_reasons = NULL,
+ /* PRINTER_STATE_REASONS env var */
rip_max_cache[255];
/* RIP_MAX_CACHE env variable */
memset(job->filters, 0, sizeof(job->filters));
-
if (job->printer->raw)
{
/*
* Local jobs get filtered...
*/
- filters = mimeFilter(MimeDatabase, job->filetypes[job->current_file],
- job->printer->filetype, &(job->cost));
+ mime_type_t *dst = job->printer->filetype;
+ /* Destination file type */
+
+ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
+ job->id, job->current_file + 1);
+ if (stat(filename, &fileinfo))
+ fileinfo.st_size = 0;
+
+ if (job->retry_as_raster)
+ {
+ /*
+ * Need to figure out whether the printer supports image/pwg-raster or
+ * image/urf, and use the corresponding type...
+ */
+
+ char type[MIME_MAX_TYPE]; /* MIME media type for printer */
+
+ snprintf(type, sizeof(type), "%s/image/urf", job->printer->name);
+ if ((dst = mimeType(MimeDatabase, "printer", type)) == NULL)
+ {
+ snprintf(type, sizeof(type), "%s/image/pwg-raster", job->printer->name);
+ dst = mimeType(MimeDatabase, "printer", type);
+ }
+
+ if (dst)
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Retrying job as \"%s\".", strchr(dst->type, '/') + 1);
+ else
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to retry job using a supported raster format.");
+ }
+
+ filters = mimeFilter2(MimeDatabase, job->filetypes[job->current_file], (size_t)fileinfo.st_size, dst, &(job->cost));
if (!filters)
{
cupsdLogJob(job, CUPSD_LOG_ERROR,
- "Unable to convert file %d to printable format!",
+ "Unable to convert file %d to printable format.",
job->current_file);
abort_message = "Aborting job because it cannot be printed.";
abort_state = IPP_JOB_ABORTED;
+ ippSetString(job->attrs, &job->reasons, 0, "document-unprintable-error");
goto abort_job;
}
+ /*
+ * Figure out the final content type...
+ */
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%d filters for job:",
+ cupsArrayCount(filters));
+ for (filter = (mime_filter_t *)cupsArrayFirst(filters);
+ filter;
+ filter = (mime_filter_t *)cupsArrayNext(filters))
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%s (%s/%s to %s/%s, cost %d)",
+ filter->filter,
+ filter->src ? filter->src->super : "???",
+ filter->src ? filter->src->type : "???",
+ filter->dst ? filter->dst->super : "???",
+ filter->dst ? filter->dst->type : "???",
+ filter->cost);
+
+ if (!job->printer->remote)
+ {
+ for (filter = (mime_filter_t *)cupsArrayLast(filters);
+ filter && filter->dst;
+ filter = (mime_filter_t *)cupsArrayPrev(filters))
+ if (strcmp(filter->dst->super, "printer") ||
+ strcmp(filter->dst->type, job->printer->name))
+ break;
+
+ if (filter && filter->dst)
+ {
+ if ((ptr = strchr(filter->dst->type, '/')) != NULL)
+ snprintf(final_content_type, sizeof(final_content_type),
+ "FINAL_CONTENT_TYPE=%s", ptr + 1);
+ else
+ snprintf(final_content_type, sizeof(final_content_type),
+ "FINAL_CONTENT_TYPE=%s/%s", filter->dst->super,
+ filter->dst->type);
+ }
+ else
+ snprintf(final_content_type, sizeof(final_content_type),
+ "FINAL_CONTENT_TYPE=printer/%s", job->printer->name);
+ }
+
/*
* Remove NULL ("-") filters...
*/
* Add decompression/raw filter as needed...
*/
- if ((!job->printer->raw && job->compressions[job->current_file]) ||
- (!filters && !job->printer->remote &&
- (job->num_files > 1 || !strncmp(job->printer->device_uri, "file:", 5))))
+ if ((job->compressions[job->current_file] && (!job->printer->remote || job->num_files == 1)) ||
+ (!job->printer->remote && job->printer->raw && job->num_files > 1))
{
/*
* Add gziptoany filter to the front of the list...
if (cupsArrayCount(filters) > MAX_FILTERS)
{
cupsdLogJob(job, CUPSD_LOG_DEBUG,
- "Too many filters (%d > %d), unable to print!",
+ "Too many filters (%d > %d), unable to print.",
cupsArrayCount(filters), MAX_FILTERS);
abort_message = "Aborting job because it needs too many filters to print.";
abort_state = IPP_JOB_ABORTED;
+ ippSetString(job->attrs, &job->reasons, 0, "document-unprintable-error");
+
goto abort_job;
}
if ((job->job_sheets =
ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_ZERO)) != NULL)
cupsdLogJob(job, CUPSD_LOG_DEBUG,
- "... but someone added one without setting job_sheets!");
+ "... but someone added one without setting job_sheets.");
}
else if (job->job_sheets->num_values == 1)
cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-sheets=%s",
job->job_sheets->values[0].string.text,
job->job_sheets->values[1].string.text);
- if (job->printer->type & (CUPS_PRINTER_REMOTE | CUPS_PRINTER_IMPLICIT))
+ if (job->printer->type & CUPS_PRINTER_REMOTE)
banner_page = 0;
else if (job->job_sheets == NULL)
banner_page = 0;
- else if (strcasecmp(job->job_sheets->values[0].string.text, "none") != 0 &&
+ else if (_cups_strcasecmp(job->job_sheets->values[0].string.text, "none") != 0 &&
job->current_file == 0)
banner_page = 1;
else if (job->job_sheets->num_values > 1 &&
- strcasecmp(job->job_sheets->values[1].string.text, "none") != 0 &&
+ _cups_strcasecmp(job->job_sheets->values[1].string.text, "none") != 0 &&
job->current_file == (job->num_files - 1))
banner_page = 1;
else
*/
if (job->printer->remote)
- argv = calloc(7 + job->num_files, sizeof(char *));
+ argc = 6 + job->num_files;
else
- argv = calloc(8, sizeof(char *));
+ argc = 7;
- if (!argv)
+ if ((argv = calloc((size_t)argc + 1, sizeof(char *))) == NULL)
{
cupsdLogMessage(CUPSD_LOG_DEBUG, "Unable to allocate argument array - %s",
strerror(errno));
{
snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
job->id, job->current_file + 1);
- argv[6] = filename;
+ argv[6] = strdup(filename);
}
for (i = 0; argv[i]; i ++)
IPP_TAG_LANGUAGE);
#ifdef __APPLE__
- strcpy(apple_language, "APPLE_LANGUAGE=");
+ strlcpy(apple_language, "APPLE_LANGUAGE=", sizeof(apple_language));
_cupsAppleLanguage(attr->values[0].string.text,
apple_language + 15, sizeof(apple_language) - 15);
#endif /* __APPLE__ */
* the POSIX locale...
*/
- strcpy(lang, "LANG=C");
+ strlcpy(lang, "LANG=C", sizeof(lang));
break;
case 2 :
snprintf(printer_location, sizeof(printer_name), "PRINTER_LOCATION=%s",
job->printer->location ? job->printer->location : "");
snprintf(printer_name, sizeof(printer_name), "PRINTER=%s", job->printer->name);
+ if (job->printer->num_reasons > 0)
+ {
+ char *psrptr; /* Pointer into PRINTER_STATE_REASONS */
+ size_t psrlen; /* Size of PRINTER_STATE_REASONS */
+
+ for (psrlen = 22, i = 0; i < job->printer->num_reasons; i ++)
+ psrlen += strlen(job->printer->reasons[i]) + 1;
+
+ if ((printer_state_reasons = malloc(psrlen)) != NULL)
+ {
+ /*
+ * All of these strcpy's are safe because we allocated the psr string...
+ */
+
+ strlcpy(printer_state_reasons, "PRINTER_STATE_REASONS=", psrlen);
+ for (psrptr = printer_state_reasons + 22, i = 0;
+ i < job->printer->num_reasons;
+ i ++)
+ {
+ if (i)
+ *psrptr++ = ',';
+ strlcpy(psrptr, job->printer->reasons[i], psrlen - (size_t)(psrptr - printer_state_reasons));
+ psrptr += strlen(psrptr);
+ }
+ }
+ }
snprintf(rip_max_cache, sizeof(rip_max_cache), "RIP_MAX_CACHE=%s", RIPCache);
+ if (job->printer->num_auth_info_required == 1)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s",
+ job->printer->auth_info_required[0]);
+ else if (job->printer->num_auth_info_required == 2)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s,%s",
+ job->printer->auth_info_required[0],
+ job->printer->auth_info_required[1]);
+ else if (job->printer->num_auth_info_required == 3)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s,%s,%s",
+ job->printer->auth_info_required[0],
+ job->printer->auth_info_required[1],
+ job->printer->auth_info_required[2]);
+ else if (job->printer->num_auth_info_required == 4)
+ snprintf(auth_info_required, sizeof(auth_info_required),
+ "AUTH_INFO_REQUIRED=%s,%s,%s,%s",
+ job->printer->auth_info_required[0],
+ job->printer->auth_info_required[1],
+ job->printer->auth_info_required[2],
+ job->printer->auth_info_required[3]);
+ else
+ strlcpy(auth_info_required, "AUTH_INFO_REQUIRED=none",
+ sizeof(auth_info_required));
+
envc = cupsdLoadEnv(envp, (int)(sizeof(envp) / sizeof(envp[0])));
envp[envc ++] = charset;
envp[envc ++] = printer_info;
envp[envc ++] = printer_location;
envp[envc ++] = printer_name;
+ envp[envc ++] = printer_state_reasons ? printer_state_reasons :
+ "PRINTER_STATE_REASONS=none";
envp[envc ++] = banner_page ? "CUPS_FILETYPE=job-sheet" :
"CUPS_FILETYPE=document";
- if (!job->printer->remote && !job->printer->raw)
- {
- filter = (mime_filter_t *)cupsArrayLast(filters);
-
- if (job->printer->port_monitor)
- filter = (mime_filter_t *)cupsArrayPrev(filters);
-
- if (filter && filter->dst)
- {
- snprintf(final_content_type, sizeof(final_content_type),
- "FINAL_CONTENT_TYPE=%s/%s",
- filter->dst->super, filter->dst->type);
- envp[envc ++] = final_content_type;
- }
- }
+ if (final_content_type[0])
+ envp[envc ++] = final_content_type;
if (Classification && !banner_page)
{
envp[envc ++] = classification;
}
- if (job->dtype & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT))
+ if (job->dtype & CUPS_PRINTER_CLASS)
{
snprintf(class_name, sizeof(class_name), "CLASS=%s", job->dest);
envp[envc ++] = class_name;
}
- if (job->auth_username)
- envp[envc ++] = job->auth_username;
- if (job->auth_domain)
- envp[envc ++] = job->auth_domain;
- if (job->auth_password)
- envp[envc ++] = job->auth_password;
+ envp[envc ++] = auth_info_required;
-#ifdef HAVE_GSSAPI
- if (job->ccname)
- envp[envc ++] = job->ccname;
-#endif /* HAVE_GSSAPI */
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ if (job->auth_env[i])
+ envp[envc ++] = job->auth_env[i];
+ else
+ break;
+
+ if (job->auth_uid)
+ envp[envc ++] = job->auth_uid;
envp[envc] = NULL;
}
else
{
- if (job->current_file == 1)
+ if (job->current_file == 1 ||
+ (job->printer->pc && job->printer->pc->single_file))
{
if (strncmp(job->printer->device_uri, "file:", 5) != 0)
{
cupsdLogJob(job, CUPSD_LOG_INFO, "Started filter %s (PID %d)", command,
pid);
- argv[6] = NULL;
- slot = !slot;
+ if (argv[6])
+ {
+ free(argv[6]);
+ argv[6] = NULL;
+ }
+
+ slot = !slot;
}
cupsArrayDelete(filters);
if (strncmp(job->printer->device_uri, "file:", 5) != 0)
{
- if (job->current_file == 1 || job->printer->remote)
+ if (job->current_file == 1 || job->printer->remote ||
+ (job->printer->pc && job->printer->pc->single_file))
{
sscanf(job->printer->device_uri, "%254[^:]", scheme);
snprintf(command, sizeof(command), "%s/backend/%s", ServerBin, scheme);
else if (stat(command, &backinfo))
backroot = 0;
else
- backroot = !(backinfo.st_mode & (S_IRWXG | S_IRWXO));
+ backroot = !(backinfo.st_mode & (S_IWGRP | S_IRWXO));
argv[0] = job->printer->sanitized_device_uri;
pid = cupsdStartProcess(command, argv, envp, filterfds[!slot][0],
filterfds[slot][1], job->status_pipes[1],
job->back_pipes[1], job->side_pipes[1],
- backroot, job->profile, job, &(job->backend));
+ backroot, job->bprofile, job, &(job->backend));
if (pid == 0)
{
}
}
+ if (job->current_file == job->num_files ||
+ (job->printer->pc && job->printer->pc->single_file))
+ cupsdClosePipe(job->print_pipes);
+
if (job->current_file == job->num_files)
{
- cupsdClosePipe(job->print_pipes);
cupsdClosePipe(job->back_pipes);
cupsdClosePipe(job->side_pipes);
filterfds[slot][0] = -1;
filterfds[slot][1] = -1;
- if (job->current_file == job->num_files)
- {
+ if (job->current_file == job->num_files ||
+ (job->printer->pc && job->printer->pc->single_file))
cupsdClosePipe(job->print_pipes);
+ if (job->current_file == job->num_files)
+ {
close(job->status_pipes[1]);
job->status_pipes[1] = -1;
}
cupsdClosePipe(filterfds[slot]);
- if (job->printer->remote && job->num_files > 1)
- {
- for (i = 0; i < job->num_files; i ++)
- free(argv[i + 6]);
- }
+ for (i = 6; i < argc; i ++)
+ if (argv[i])
+ free(argv[i]);
free(argv);
+ if (printer_state_reasons)
+ free(printer_state_reasons);
+
cupsdAddSelect(job->status_buffer->fd, (cupsd_selfunc_t)update_job, NULL,
job);
cupsdAddEvent(CUPSD_EVENT_JOB_STATE, job->printer, job, "Job #%d started.",
job->id);
- /*
- * If we get here than we are able to run the printer driver filters, so clear
- * the missing and insecure warnings...
- */
-
- if (cupsdSetPrinterReasons(job->printer, "-cups-missing-filter-warning,"
- "cups-insecure-filter-warning"))
- cupsdAddEvent(CUPSD_EVENT_PRINTER_STATE, job->printer, NULL,
- "Printer drivers now functional.");
-
return;
if (argv)
{
- if (job->printer->remote && job->num_files > 1)
- {
- for (i = 0; i < job->num_files; i ++)
- free(argv[i + 6]);
- }
-
- free(argv);
+ for (i = 6; i < argc; i ++)
+ if (argv[i])
+ free(argv[i]);
}
+ if (printer_state_reasons)
+ free(printer_state_reasons);
+
cupsdClosePipe(job->print_pipes);
cupsdClosePipe(job->back_pipes);
cupsdClosePipe(job->side_pipes);
cupsdDeleteJob(cupsd_job_t *job, /* I - Job */
cupsd_jobaction_t action)/* I - Action */
{
+ int i; /* Looping var */
+
+
if (job->printer)
finalize_job(job, 1);
if (action == CUPSD_JOB_PURGE)
- {
- /*
- * Remove the job info file...
- */
-
- char filename[1024]; /* Job filename */
-
- snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot,
- job->id);
- unlink(filename);
- }
+ remove_job_history(job);
cupsdClearString(&job->username);
cupsdClearString(&job->dest);
- cupsdClearString(&job->auth_username);
- cupsdClearString(&job->auth_domain);
- cupsdClearString(&job->auth_password);
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ cupsdClearString(job->auth_env + i);
+ cupsdClearString(&job->auth_uid);
-#ifdef HAVE_GSSAPI
- /*
- * Destroy the credential cache and clear the KRB5CCNAME env var string.
- */
-
- if (job->ccache)
- {
- krb5_cc_destroy(KerberosContext, job->ccache);
- job->ccache = NULL;
- }
-
- cupsdClearString(&job->ccname);
-#endif /* HAVE_GSSAPI */
-
- if (job->num_files > 0)
+ if (action == CUPSD_JOB_PURGE)
+ remove_job_files(job);
+ else if (job->num_files > 0)
{
free(job->compressions);
free(job->filetypes);
}
+/*
+ * 'cupsdGetCompletedJobs()'- Generate a completed jobs list.
+ */
+
+cups_array_t * /* O - Array of jobs */
+cupsdGetCompletedJobs(
+ cupsd_printer_t *p) /* I - Printer */
+{
+ cups_array_t *list; /* Array of jobs */
+ cupsd_job_t *job; /* Current job */
+
+
+ list = cupsArrayNew(compare_completed_jobs, NULL);
+
+ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ if ((!p || !_cups_strcasecmp(p->name, job->dest)) && job->state_value >= IPP_JOB_STOPPED && job->completed_time)
+ cupsArrayAdd(list, job);
+
+ return (list);
+}
+
+
/*
* 'cupsdGetPrinterJobCount()' - Get the number of pending, processing,
* or held jobs in a printer or class.
for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0;
job;
job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
- if (job->dest && !strcasecmp(job->dest, dest))
+ if (job->dest && !_cups_strcasecmp(job->dest, dest))
count ++;
return (count);
for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs), count = 0;
job;
job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
- if (!strcasecmp(job->username, username))
+ if (!_cups_strcasecmp(job->username, username))
count ++;
return (count);
cupsdLoadAllJobs(void)
{
char filename[1024]; /* Full filename of job.cache file */
- struct stat fileinfo, /* Information on job.cache file */
- dirinfo; /* Information on RequestRoot dir */
-
+ struct stat fileinfo; /* Information on job.cache file */
+ cups_dir_t *dir; /* RequestRoot dir */
+ cups_dentry_t *dent; /* Entry in RequestRoot */
+ int load_cache = 1; /* Load the job.cache file? */
/*
if (stat(filename, &fileinfo))
{
- fileinfo.st_mtime = 0;
+ /*
+ * No job.cache file...
+ */
+
+ load_cache = 0;
if (errno != ENOENT)
cupsdLogMessage(CUPSD_LOG_ERROR,
"Unable to get file information for \"%s\" - %s",
filename, strerror(errno));
}
+ else if ((dir = cupsDirOpen(RequestRoot)) == NULL)
+ {
+ /*
+ * No spool directory...
+ */
- if (stat(RequestRoot, &dirinfo))
+ load_cache = 0;
+ }
+ else
{
- dirinfo.st_mtime = 0;
+ while ((dent = cupsDirRead(dir)) != NULL)
+ {
+ if (strlen(dent->filename) >= 6 && dent->filename[0] == 'c' && dent->fileinfo.st_mtime > fileinfo.st_mtime)
+ {
+ /*
+ * Job history file is newer than job.cache file...
+ */
- if (errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to get directory information for \"%s\" - %s",
- RequestRoot, strerror(errno));
+ load_cache = 0;
+ break;
+ }
+ }
+
+ cupsDirClose(dir);
}
/*
* Load the most recent source for job data...
*/
- if (dirinfo.st_mtime > fileinfo.st_mtime)
+ if (load_cache)
{
+ /*
+ * Load the job.cache file...
+ */
+
+ load_job_cache(filename);
+ }
+ else
+ {
+ /*
+ * Load the job history files...
+ */
+
load_request_root();
load_next_job_id(filename);
}
- else
- load_job_cache(filename);
/*
* Clean out old jobs as needed...
int /* O - 1 on success, 0 on failure */
cupsdLoadJob(cupsd_job_t *job) /* I - Job */
{
+ int i; /* Looping var */
char jobfile[1024]; /* Job filename */
cups_file_t *fp; /* Job file */
int fileid; /* Current file ID */
if ((job->attrs = ippNew()) == NULL)
{
- cupsdLogJob(job, CUPSD_LOG_ERROR, "Ran out of memory for job attributes!");
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Ran out of memory for job attributes.");
return (0);
}
* Load job attributes...
*/
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] Loading attributes...", job->id);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Loading attributes...");
snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, job->id);
- if ((fp = cupsFileOpen(jobfile, "r")) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to open job control file \"%s\" - %s!",
- job->id, jobfile, strerror(errno));
+ if ((fp = cupsdOpenConfFile(jobfile)) == NULL)
goto error;
- }
if (ippReadIO(fp, (ipp_iocb_t)cupsFileRead, 1, NULL, job->attrs) != IPP_DATA)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to read job control file \"%s\"!", job->id,
- jobfile);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to read job control file \"%s\".", jobfile);
cupsFileClose(fp);
goto error;
}
if (!ippFindAttribute(job->attrs, "time-at-creation", IPP_TAG_INTEGER))
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad time-at-creation attribute in "
- "control file!", job->id);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad time-at-creation attribute in control file.");
goto error;
}
if ((job->state = ippFindAttribute(job->attrs, "job-state",
IPP_TAG_ENUM)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad job-state attribute in control "
- "file!", job->id);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad job-state attribute in control file.");
goto error;
}
- job->state_value = (ipp_jstate_t)job->state->values[0].integer;
+ job->state_value = (ipp_jstate_t)job->state->values[0].integer;
+ job->file_time = 0;
+ job->history_time = 0;
+
+ if ((attr = ippFindAttribute(job->attrs, "time-at-creation", IPP_TAG_INTEGER)) != NULL)
+ job->creation_time = attr->values[0].integer;
+
+ if (job->state_value >= IPP_JOB_CANCELED && (attr = ippFindAttribute(job->attrs, "time-at-completed", IPP_TAG_INTEGER)) != NULL)
+ {
+ job->completed_time = attr->values[0].integer;
+
+ if (JobHistory < INT_MAX)
+ job->history_time = attr->values[0].integer + JobHistory;
+ else
+ job->history_time = INT_MAX;
+
+ if (job->history_time < time(NULL))
+ goto error; /* Expired, remove from history */
+
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
+
+ if (JobFiles < INT_MAX)
+ job->file_time = attr->values[0].integer + JobFiles;
+ else
+ job->file_time = INT_MAX;
+
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdLoadJob: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
+ }
if (!job->dest)
{
if ((attr = ippFindAttribute(job->attrs, "job-printer-uri",
IPP_TAG_URI)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] No job-printer-uri attribute in control file!",
- job->id);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "No job-printer-uri attribute in control file.");
goto error;
}
if ((dest = cupsdValidateDest(attr->values[0].string.text, &(job->dtype),
&destptr)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to queue job for destination \"%s\"!",
- job->id, attr->values[0].string.text);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to queue job for destination \"%s\".",
+ attr->values[0].string.text);
goto error;
}
}
else if ((destptr = cupsdFindDest(job->dest)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to queue job for destination \"%s\"!",
- job->id, job->dest);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unable to queue job for destination \"%s\".",
+ job->dest);
goto error;
}
- job->sheets = ippFindAttribute(job->attrs, "job-media-sheets-completed",
- IPP_TAG_INTEGER);
- job->job_sheets = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_NAME);
+ if ((job->reasons = ippFindAttribute(job->attrs, "job-state-reasons",
+ IPP_TAG_KEYWORD)) == NULL)
+ {
+ const char *reason; /* job-state-reason keyword */
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Adding missing job-state-reasons attribute to control file.");
+
+ switch (job->state_value)
+ {
+ default :
+ case IPP_JOB_PENDING :
+ if (destptr->state == IPP_PRINTER_STOPPED)
+ reason = "printer-stopped";
+ else
+ reason = "none";
+ break;
+
+ case IPP_JOB_HELD :
+ if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
+ IPP_TAG_ZERO)) != NULL &&
+ (attr->value_tag == IPP_TAG_NAME ||
+ attr->value_tag == IPP_TAG_NAMELANG ||
+ attr->value_tag == IPP_TAG_KEYWORD) &&
+ strcmp(attr->values[0].string.text, "no-hold"))
+ reason = "job-hold-until-specified";
+ else
+ reason = "job-incoming";
+ break;
+
+ case IPP_JOB_PROCESSING :
+ reason = "job-printing";
+ break;
+
+ case IPP_JOB_STOPPED :
+ reason = "job-stopped";
+ break;
+
+ case IPP_JOB_CANCELED :
+ reason = "job-canceled-by-user";
+ break;
+
+ case IPP_JOB_ABORTED :
+ reason = "aborted-by-system";
+ break;
+
+ case IPP_JOB_COMPLETED :
+ reason = "job-completed-successfully";
+ break;
+ }
+
+ job->reasons = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD,
+ "job-state-reasons", NULL, reason);
+ }
+ else if (job->state_value == IPP_JOB_PENDING)
+ {
+ if (destptr->state == IPP_PRINTER_STOPPED)
+ ippSetString(job->attrs, &job->reasons, 0, "printer-stopped");
+ else
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+ }
+
+ job->impressions = ippFindAttribute(job->attrs, "job-impressions-completed", IPP_TAG_INTEGER);
+ job->sheets = ippFindAttribute(job->attrs, "job-media-sheets-completed", IPP_TAG_INTEGER);
+ job->job_sheets = ippFindAttribute(job->attrs, "job-sheets", IPP_TAG_NAME);
+
+ if (!job->impressions)
+ job->impressions = ippAddInteger(job->attrs, IPP_TAG_JOB, IPP_TAG_INTEGER, "job-impressions-completed", 0);
if (!job->priority)
{
if ((attr = ippFindAttribute(job->attrs, "job-priority",
IPP_TAG_INTEGER)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad job-priority attribute in "
- "control file!", job->id);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad job-priority attribute in control file.");
goto error;
}
if ((attr = ippFindAttribute(job->attrs, "job-originating-user-name",
IPP_TAG_NAME)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Missing or bad job-originating-user-name "
- "attribute in control file!", job->id);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Missing or bad job-originating-user-name "
+ "attribute in control file.");
goto error;
}
cupsdSetString(&job->username, attr->values[0].string.text);
}
+ if (!job->name)
+ {
+ if ((attr = ippFindAttribute(job->attrs, "job-name", IPP_TAG_NAME)) != NULL)
+ cupsdSetString(&job->name, attr->values[0].string.text);
+ }
+
/*
* Set the job hold-until time and state...
*/
job->state_value = IPP_JOB_PENDING;
}
+ if ((attr = ippFindAttribute(job->attrs, "job-k-octets", IPP_TAG_INTEGER)) != NULL)
+ job->koctets = attr->values[0].integer;
+
if (!job->num_files)
{
/*
if (access(jobfile, 0))
break;
- cupsdLogMessage(CUPSD_LOG_DEBUG,
- "[Job %d] Auto-typing document file \"%s\"...", job->id,
- jobfile);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG,
+ "Auto-typing document file \"%s\"...", jobfile);
if (fileid > job->num_files)
{
if (job->num_files == 0)
{
- compressions = (int *)calloc(fileid, sizeof(int));
- filetypes = (mime_type_t **)calloc(fileid, sizeof(mime_type_t *));
+ compressions = (int *)calloc((size_t)fileid, sizeof(int));
+ filetypes = (mime_type_t **)calloc((size_t)fileid, sizeof(mime_type_t *));
}
else
{
- compressions = (int *)realloc(job->compressions,
- sizeof(int) * fileid);
- filetypes = (mime_type_t **)realloc(job->filetypes,
- sizeof(mime_type_t *) *
- fileid);
+ compressions = (int *)realloc(job->compressions, sizeof(int) * (size_t)fileid);
+ filetypes = (mime_type_t **)realloc(job->filetypes, sizeof(mime_type_t *) * (size_t)fileid);
}
+ if (compressions)
+ job->compressions = compressions;
+
+ if (filetypes)
+ job->filetypes = filetypes;
+
if (!compressions || !filetypes)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Ran out of memory for job file types!",
- job->id);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Ran out of memory for job file types.");
ippDelete(job->attrs);
job->attrs = NULL;
- if (compressions)
- free(compressions);
-
- if (filetypes)
- free(filetypes);
-
if (job->compressions)
{
free(job->compressions);
return (0);
}
- job->compressions = compressions;
- job->filetypes = filetypes;
- job->num_files = fileid;
+ job->num_files = fileid;
}
job->filetypes[fileid - 1] = mimeFileType(MimeDatabase, jobfile, NULL,
{
snprintf(jobfile, sizeof(jobfile), "%s/a%05d", RequestRoot, job->id);
- cupsdClearString(&job->auth_username);
- cupsdClearString(&job->auth_domain);
- cupsdClearString(&job->auth_password);
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ cupsdClearString(job->auth_env + i);
+ cupsdClearString(&job->auth_uid);
if ((fp = cupsFileOpen(jobfile, "r")) != NULL)
{
- int i, /* Looping var */
- bytes; /* Size of auth data */
- char line[255], /* Line from file */
- data[255]; /* Decoded data */
+ int bytes, /* Size of auth data */
+ linenum = 1; /* Current line number */
+ char line[65536], /* Line from file */
+ *value, /* Value from line */
+ data[65536]; /* Decoded data */
- for (i = 0;
- i < destptr->num_auth_info_required &&
- cupsFileGets(fp, line, sizeof(line));
- i ++)
+ if (cupsFileGets(fp, line, sizeof(line)) &&
+ !strcmp(line, "CUPSD-AUTH-V3"))
{
- bytes = sizeof(data);
- httpDecode64_2(data, &bytes, line);
-
- if (!strcmp(destptr->auth_info_required[i], "username"))
- cupsdSetStringf(&job->auth_username, "AUTH_USERNAME=%s", data);
- else if (!strcmp(destptr->auth_info_required[i], "domain"))
- cupsdSetStringf(&job->auth_domain, "AUTH_DOMAIN=%s", data);
- else if (!strcmp(destptr->auth_info_required[i], "password"))
- cupsdSetStringf(&job->auth_password, "AUTH_PASSWORD=%s", data);
+ i = 0;
+ while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
+ {
+ /*
+ * Decode value...
+ */
+
+ if (strcmp(line, "negotiate") && strcmp(line, "uid"))
+ {
+ bytes = sizeof(data);
+ httpDecode64_2(data, &bytes, value);
+ }
+
+ /*
+ * Assign environment variables...
+ */
+
+ if (!strcmp(line, "uid"))
+ {
+ cupsdSetStringf(&job->auth_uid, "AUTH_UID=%s", value);
+ continue;
+ }
+ else if (i >= (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0])))
+ break;
+
+ if (!strcmp(line, "username"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_USERNAME=%s", data);
+ else if (!strcmp(line, "domain"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_DOMAIN=%s", data);
+ else if (!strcmp(line, "password"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_PASSWORD=%s", data);
+ else if (!strcmp(line, "negotiate"))
+ cupsdSetStringf(job->auth_env + i, "AUTH_NEGOTIATE=%s", value);
+ else
+ continue;
+
+ i ++;
+ }
}
cupsFileClose(fp);
ippDelete(job->attrs);
job->attrs = NULL;
- if (job->compressions)
- {
- free(job->compressions);
- job->compressions = NULL;
- }
-
- if (job->filetypes)
- {
- free(job->filetypes);
- job->filetypes = NULL;
- }
-
- job->num_files = 0;
-
- unlink(jobfile);
+ remove_job_history(job);
+ remove_job_files(job);
return (0);
}
* Change the destination information...
*/
- cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT,
- "Stopping job prior to move.");
+ if (job->state_value > IPP_JOB_HELD)
+ cupsdSetJobState(job, IPP_JOB_PENDING, CUPSD_JOB_DEFAULT,
+ "Stopping job prior to move.");
cupsdAddEvent(CUPSD_EVENT_JOB_CONFIG_CHANGED, oldp, job,
"Job #%d moved from %s to %s.", job->id, olddest,
p->name);
cupsdSetString(&job->dest, p->name);
- job->dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE |
- CUPS_PRINTER_IMPLICIT);
+ job->dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE);
if ((attr = ippFindAttribute(job->attrs, "job-printer-uri",
IPP_TAG_URI)) != NULL)
- cupsdSetString(&(attr->values[0].string.text), p->uri);
+ ippSetString(job->attrs, &attr, 0, p->uri);
cupsdAddEvent(CUPSD_EVENT_JOB_STOPPED, p, job,
"Job #%d moved from %s to %s.", job->id, olddest,
cupsdSaveAllJobs(void)
{
int i; /* Looping var */
- cups_file_t *fp; /* Job cache file */
- char temp[1024]; /* Temporary string */
+ cups_file_t *fp; /* job.cache file */
+ char filename[1024], /* job.cache filename */
+ temp[1024]; /* Temporary string */
cupsd_job_t *job; /* Current job */
time_t curtime; /* Current time */
struct tm *curdate; /* Current date */
- snprintf(temp, sizeof(temp), "%s/job.cache", CacheDir);
- if ((fp = cupsFileOpen(temp, "w")) == NULL)
- {
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to create job cache file \"%s\" - %s",
- temp, strerror(errno));
+ snprintf(filename, sizeof(filename), "%s/job.cache", CacheDir);
+ if ((fp = cupsdCreateConfFile(filename, ConfigFilePerm)) == NULL)
return;
- }
- cupsdLogMessage(CUPSD_LOG_INFO, "Saving job cache file \"%s\"...", temp);
-
- /*
- * Restrict access to the file...
- */
-
- fchown(cupsFileNumber(fp), getuid(), Group);
- fchmod(cupsFileNumber(fp), ConfigFilePerm);
+ cupsdLogMessage(CUPSD_LOG_INFO, "Saving job.cache...");
/*
* Write a small header to the file...
job;
job = (cupsd_job_t *)cupsArrayNext(Jobs))
{
+ if (job->printer && job->printer->temporary)
+ {
+ /*
+ * Don't save jobs on temporary printers...
+ */
+
+ continue;
+ }
+
cupsFilePrintf(fp, "<Job %d>\n", job->id);
cupsFilePrintf(fp, "State %d\n", job->state_value);
+ cupsFilePrintf(fp, "Created %ld\n", (long)job->creation_time);
+ if (job->completed_time)
+ cupsFilePrintf(fp, "Completed %ld\n", (long)job->completed_time);
cupsFilePrintf(fp, "Priority %d\n", job->priority);
- cupsFilePrintf(fp, "HoldUntil %d\n", (int)job->hold_until);
+ if (job->hold_until)
+ cupsFilePrintf(fp, "HoldUntil %ld\n", (long)job->hold_until);
cupsFilePrintf(fp, "Username %s\n", job->username);
+ if (job->name)
+ cupsFilePutConf(fp, "Name", job->name);
cupsFilePrintf(fp, "Destination %s\n", job->dest);
cupsFilePrintf(fp, "DestType %d\n", job->dtype);
+ cupsFilePrintf(fp, "KOctets %d\n", job->koctets);
cupsFilePrintf(fp, "NumFiles %d\n", job->num_files);
for (i = 0; i < job->num_files; i ++)
cupsFilePrintf(fp, "File %d %s/%s %d\n", i + 1, job->filetypes[i]->super,
cupsFilePuts(fp, "</Job>\n");
}
- cupsFileClose(fp);
+ cupsdCloseCreatedConfFile(fp, filename);
}
cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdSaveJob(job=%p(%d)): job->attrs=%p",
job, job->id, job->attrs);
- snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot, job->id);
-
- if ((fp = cupsFileOpen(filename, "w")) == NULL)
+ if (job->printer && job->printer->temporary)
{
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to create job control file \"%s\" - %s.",
- job->id, filename, strerror(errno));
+ /*
+ * Don't save jobs on temporary printers...
+ */
+
+ job->dirty = 0;
return;
}
- fchmod(cupsFileNumber(fp), 0600);
+ snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot, job->id);
+
+ if ((fp = cupsdCreateConfFile(filename, ConfigFilePerm & 0600)) == NULL)
+ return;
+
fchown(cupsFileNumber(fp), RunUser, Group);
job->attrs->state = IPP_IDLE;
if (ippWriteIO(fp, (ipp_iocb_t)cupsFileWrite, 1, NULL,
job->attrs) != IPP_DATA)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unable to write job control file!", job->id);
+ {
+ cupsdLogJob(job, CUPSD_LOG_ERROR, "Unable to write job control file.");
+ cupsFileClose(fp);
+ return;
+ }
- cupsFileClose(fp);
+ if (!cupsdCloseCreatedConfFile(fp, filename))
+ {
+ /*
+ * Remove backup file and mark this job as clean...
+ */
+
+ strlcat(filename, ".O", sizeof(filename));
+ unlink(filename);
- job->dirty = 0;
+ job->dirty = 0;
+ }
}
attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
if (attr)
- cupsdSetString(&(attr->values[0].string.text), when);
+ ippSetString(job->attrs, &attr, 0, when);
else
attr = ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD,
"job-hold-until", NULL, when);
job->dirty = 1;
cupsdMarkDirty(CUPSD_DIRTY_JOBS);
}
+
}
+ if (strcmp(when, "no-hold"))
+ ippSetString(job->attrs, &job->reasons, 0, "job-hold-until-specified");
+ else
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+
/*
* Update the hold time...
*/
+ job->cancel_time = 0;
+
if (!strcmp(when, "indefinite") || !strcmp(when, "auth-info-required"))
{
/*
*/
job->hold_until = 0;
+
+ if (MaxHoldTime > 0)
+ job->cancel_time = time(NULL) + MaxHoldTime;
}
else if (!strcmp(when, "day-time"))
{
if (!cupsdLoadJob(job))
return;
- /*
- * Don't do anything if the state is unchanged and we aren't purging the
- * job...
- */
+ /*
+ * Don't do anything if the state is unchanged and we aren't purging the
+ * job...
+ */
- oldstate = job->state_value;
- if (newstate == oldstate && action != CUPSD_JOB_PURGE)
- return;
+ oldstate = job->state_value;
+ if (newstate == oldstate && action != CUPSD_JOB_PURGE)
+ return;
/*
* Stop any processes that are working on the current job...
* Set the new job state...
*/
- job->state->values[0].integer = newstate;
- job->state_value = newstate;
+ job->state_value = newstate;
+
+ if (job->state)
+ job->state->values[0].integer = newstate;
switch (newstate)
{
if (attr)
{
- attr->value_tag = IPP_TAG_KEYWORD;
- cupsdSetString(&(attr->values[0].string.text), "no-hold");
+ ippSetValueTag(job->attrs, &attr, IPP_TAG_KEYWORD);
+ ippSetString(job->attrs, &attr, 0, "no-hold");
}
default :
case IPP_JOB_CANCELED :
case IPP_JOB_COMPLETED :
set_time(job, "time-at-completed");
+ ippSetString(job->attrs, &job->reasons, 0, "processing-to-stop-point");
break;
}
"Unable to remove authentication cache: %s",
strerror(errno));
- cupsdClearString(&job->auth_username);
- cupsdClearString(&job->auth_domain);
- cupsdClearString(&job->auth_password);
-
-#ifdef HAVE_GSSAPI
- /*
- * Destroy the credential cache and clear the KRB5CCNAME env var string.
- */
-
- if (job->ccache)
- {
- krb5_cc_destroy(KerberosContext, job->ccache);
- job->ccache = NULL;
- }
+ for (i = 0;
+ i < (int)(sizeof(job->auth_env) / sizeof(job->auth_env[0]));
+ i ++)
+ cupsdClearString(job->auth_env + i);
- cupsdClearString(&job->ccname);
-#endif /* HAVE_GSSAPI */
+ cupsdClearString(&job->auth_uid);
/*
* Remove the print file for good if we aren't preserving jobs or
*/
if (!JobHistory || !JobFiles || action == CUPSD_JOB_PURGE)
- {
- for (i = 1; i <= job->num_files; i ++)
- {
- snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
- job->id, i);
- unlink(filename);
- }
-
- if (job->num_files > 0)
- {
- free(job->filetypes);
- free(job->compressions);
-
- job->num_files = 0;
- job->filetypes = NULL;
- job->compressions = NULL;
- }
- }
+ remove_job_files(job);
if (JobHistory && action != CUPSD_JOB_PURGE)
{
job;
job = (cupsd_job_t *)cupsArrayNext(PrintingJobs))
{
- if (kill_delay)
- job->kill_time = time(NULL) + kill_delay;
+ if (job->completed)
+ {
+ cupsdSetJobState(job, IPP_JOB_COMPLETED, CUPSD_JOB_FORCE, NULL);
+ }
+ else
+ {
+ if (kill_delay)
+ job->kill_time = time(NULL) + kill_delay;
- cupsdSetJobState(job, IPP_JOB_PENDING, action, NULL);
+ cupsdSetJobState(job, IPP_JOB_PENDING, action, NULL);
+ }
}
}
if (job->dirty)
cupsdSaveJob(job);
- unload_job(job);
+ if (!job->dirty)
+ unload_job(job);
}
}
+/*
+ * 'cupsdUpdateJobs()' - Update the history/file files for all jobs.
+ */
+
+void
+cupsdUpdateJobs(void)
+{
+ cupsd_job_t *job; /* Current job */
+ time_t curtime; /* Current time */
+ ipp_attribute_t *attr; /* time-at-completed attribute */
+
+
+ curtime = time(NULL);
+ JobHistoryUpdate = 0;
+
+ for (job = (cupsd_job_t *)cupsArrayFirst(Jobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(Jobs))
+ {
+ if (job->state_value >= IPP_JOB_CANCELED &&
+ (attr = ippFindAttribute(job->attrs, "time-at-completed",
+ IPP_TAG_INTEGER)) != NULL)
+ {
+ /*
+ * Update history/file expiration times...
+ */
+
+ if (JobHistory < INT_MAX)
+ job->history_time = attr->values[0].integer + JobHistory;
+ else
+ job->history_time = INT_MAX;
+
+ if (job->history_time < curtime)
+ {
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
+ continue;
+ }
+
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
+
+ if (JobFiles < INT_MAX)
+ job->file_time = attr->values[0].integer + JobFiles;
+ else
+ job->file_time = INT_MAX;
+
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
+ }
+ }
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdUpdateAllJobs: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
+}
+
+
/*
* 'compare_active_jobs()' - Compare the job IDs and priorities of two jobs.
*/
int diff; /* Difference */
+ (void)data;
+
if ((diff = ((cupsd_job_t *)second)->priority -
((cupsd_job_t *)first)->priority) != 0)
return (diff);
}
+/*
+ * 'compare_completed_jobs()' - Compare the job IDs and completion times of two jobs.
+ */
+
+static int /* O - Difference */
+compare_completed_jobs(void *first, /* I - First job */
+ void *second, /* I - Second job */
+ void *data) /* I - App data (not used) */
+{
+ int diff; /* Difference */
+
+
+ (void)data;
+
+ if ((diff = ((cupsd_job_t *)second)->completed_time -
+ ((cupsd_job_t *)first)->completed_time) != 0)
+ return (diff);
+ else
+ return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id);
+}
+
+
/*
* 'compare_jobs()' - Compare the job IDs of two jobs.
*/
void *second, /* I - Second job */
void *data) /* I - App data (not used) */
{
+ (void)data;
+
return (((cupsd_job_t *)first)->id - ((cupsd_job_t *)second)->id);
}
snprintf(temp, sizeof(temp), "[Job %d] printer-state-reasons=", job->id);
ptr = temp + strlen(temp);
if (printer->num_reasons == 0)
- strlcpy(ptr, "none", sizeof(temp) - (ptr - temp));
+ strlcpy(ptr, "none", sizeof(temp) - (size_t)(ptr - temp));
else
{
for (i = 0;
if (i)
*ptr++ = ',';
- strlcpy(ptr, printer->reasons[i], sizeof(temp) - (ptr - temp));
+ strlcpy(ptr, printer->reasons[i], sizeof(temp) - (size_t)(ptr - temp));
ptr += strlen(ptr);
}
}
cupsdLogMessage(CUPSD_LOG_DEBUG2, "finalize_job(job=%p(%d))", job, job->id);
/*
- * Clear the "connecting-to-device" reason, which is only valid when a printer
- * is processing...
+ * Clear the "connecting-to-device" and "cups-waiting-for-job-completed"
+ * reasons, which are only valid when a printer is processing, along with any
+ * remote printing job state...
*/
- cupsdSetPrinterReasons(job->printer, "-connecting-to-device");
+ cupsdSetPrinterReasons(job->printer, "-connecting-to-device,"
+ "cups-waiting-for-job-completed,"
+ "cups-remote-pending,"
+ "cups-remote-pending-held,"
+ "cups-remote-processing,"
+ "cups-remote-stopped,"
+ "cups-remote-canceled,"
+ "cups-remote-aborted,"
+ "cups-remote-completed");
/*
* Similarly, clear the "offline-report" reason for non-USB devices since we
* rarely have current information for network devices...
*/
- if (strncmp(job->printer->device_uri, "usb:", 4))
+ if (strncmp(job->printer->device_uri, "usb:", 4) &&
+ strncmp(job->printer->device_uri, "ippusb:", 7))
cupsdSetPrinterReasons(job->printer, "-offline-report");
/*
cupsdDestroyProfile(job->profile);
job->profile = NULL;
+ cupsdDestroyProfile(job->bprofile);
+ job->bprofile = NULL;
/*
- * Clear the unresponsive job watchdog timer...
+ * Clear the unresponsive job watchdog timers...
*/
- job->kill_time = 0;
+ job->cancel_time = 0;
+ job->kill_time = 0;
/*
* Close pipes and status buffer...
case IPP_JOB_COMPLETED :
job_state = IPP_JOB_COMPLETED;
message = "Job completed.";
+
+ if (!job->status)
+ ippSetString(job->attrs, &job->reasons, 0,
+ "job-completed-successfully");
break;
case IPP_JOB_STOPPED :
message = "Job stopped.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-stopped");
break;
case IPP_JOB_CANCELED :
message = "Job canceled.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-canceled-by-user");
break;
case IPP_JOB_ABORTED :
int exit_code; /* Exit code from backend */
-
/*
* Convert the status to an exit code. Due to the way the W* macros are
- * implemented on MacOS X (bug?), we have to store the exit status in a
+ * implemented on macOS (bug?), we have to store the exit status in a
* variable first and then convert...
*/
if (WIFEXITED(exit_code))
exit_code = WEXITSTATUS(exit_code);
else
+ {
+ ippSetString(job->attrs, &job->reasons, 0, "cups-backend-crashed");
exit_code = job->status;
+ }
cupsdLogJob(job, CUPSD_LOG_INFO, "Backend returned status %d (%s)",
exit_code,
exit_code == CUPS_BACKEND_HOLD ? "hold job" :
exit_code == CUPS_BACKEND_STOP ? "stop printer" :
exit_code == CUPS_BACKEND_CANCEL ? "cancel job" :
+ exit_code == CUPS_BACKEND_RETRY ? "retry job later" :
+ exit_code == CUPS_BACKEND_RETRY_CURRENT ? "retry job immediately" :
exit_code < 0 ? "crashed" : "unknown");
/*
* act...
*/
- if (job->dtype & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT))
+ if (job->dtype & CUPS_PRINTER_CLASS)
{
/*
* Queued on a class - mark the job as pending and we'll retry on
{
job_state = IPP_JOB_PENDING;
message = "Retrying job on another printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
}
}
else if (!strcmp(job->printer->error_policy, "retry-current-job"))
{
job_state = IPP_JOB_PENDING;
message = "Retrying job on same printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
}
}
else if ((job->printer->type & CUPS_PRINTER_FAX) ||
JobRetryLimit);
job_state = IPP_JOB_ABORTED;
message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
}
else
{
* Try again in N seconds...
*/
- set_hold_until(job, time(NULL) + JobRetryInterval);
-
snprintf(buffer, sizeof(buffer),
"Job held for %d seconds since it could not be sent.",
JobRetryInterval);
- job_state = IPP_JOB_HELD;
- message = buffer;
+
+ job->hold_until = time(NULL) + JobRetryInterval;
+ job_state = IPP_JOB_HELD;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
}
}
}
job_state = IPP_JOB_ABORTED;
message = "Job aborted due to backend errors; please consult "
"the error_log file for details.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
}
else if (job->state_value == IPP_JOB_PROCESSING)
{
printer_state = IPP_PRINTER_STOPPED;
message = "Printer stopped due to backend errors; please "
"consult the error_log file for details.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
}
break;
case CUPS_BACKEND_CANCEL :
/*
- * Abort the job...
+ * Cancel the job...
*/
if (job_state == IPP_JOB_COMPLETED)
{
- job_state = IPP_JOB_ABORTED;
- message = "Job aborted due to backend errors; please consult "
- "the error_log file for details.";
+ job_state = IPP_JOB_CANCELED;
+ message = "Job canceled at printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "canceled-at-device");
}
break;
* Hold the job...
*/
- cupsdSetJobHoldUntil(job, "indefinite", 1);
+ const char *reason = ippGetString(job->reasons, 0, NULL);
- job_state = IPP_JOB_HELD;
- message = "Job held indefinitely due to backend errors; please "
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "job-state-reasons=\"%s\"",
+ reason);
+
+ if (!reason || strncmp(reason, "account-", 8))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 1);
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "job-hold-until-specified");
+ message = "Job held indefinitely due to backend errors; please "
"consult the error_log file for details.";
+ }
+ else if (!strcmp(reason, "account-info-needed"))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account information is "
+ "required.";
+ }
+ else if (!strcmp(reason, "account-closed"))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account has been closed.";
+ }
+ else if (!strcmp(reason, "account-limit-reached"))
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account limit has been "
+ "reached.";
+ }
+ else
+ {
+ cupsdSetJobHoldUntil(job, "indefinite", 0);
+
+ message = "Job held indefinitely - account authorization failed.";
+ }
+
+ job_state = IPP_JOB_HELD;
}
break;
"consult the error_log file for details.";
if (job_state == IPP_JOB_COMPLETED)
+ {
job_state = IPP_JOB_PENDING;
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
+ }
break;
case CUPS_BACKEND_AUTH_REQUIRED :
job_state = IPP_JOB_HELD;
message = "Job held for authentication.";
+
+ if (strncmp(job->reasons->values[0].string.text, "account-", 8))
+ ippSetString(job->attrs, &job->reasons, 0,
+ "cups-held-for-authentication");
}
break;
+
+ case CUPS_BACKEND_RETRY :
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ /*
+ * Hold the job if the number of retries is less than the
+ * JobRetryLimit, otherwise abort the job.
+ */
+
+ job->tries ++;
+
+ if (job->tries > JobRetryLimit && JobRetryLimit > 0)
+ {
+ /*
+ * Too many tries...
+ */
+
+ snprintf(buffer, sizeof(buffer),
+ "Job aborted after %d unsuccessful attempts.",
+ JobRetryLimit);
+ job_state = IPP_JOB_ABORTED;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
+ }
+ else
+ {
+ /*
+ * Try again in N seconds...
+ */
+
+ snprintf(buffer, sizeof(buffer),
+ "Job held for %d seconds since it could not be sent.",
+ JobRetryInterval);
+
+ job->hold_until = time(NULL) + JobRetryInterval;
+ job_state = IPP_JOB_HELD;
+ message = buffer;
+
+ ippSetString(job->attrs, &job->reasons, 0,
+ "resources-are-not-ready");
+ }
+ }
+ break;
+
+ case CUPS_BACKEND_RETRY_CURRENT :
+ /*
+ * Mark the job as pending and retry on the same printer...
+ */
+
+ if (job_state == IPP_JOB_COMPLETED)
+ {
+ job_state = IPP_JOB_PENDING;
+ message = "Retrying job on same printer.";
+
+ ippSetString(job->attrs, &job->reasons, 0, "none");
+ }
+ break;
}
}
else if (job->status > 0)
job_state = IPP_JOB_STOPPED;
message = "Job stopped due to filter errors; please consult the "
"error_log file for details.";
+
+ if (WIFSIGNALED(job->status))
+ ippSetString(job->attrs, &job->reasons, 0, "cups-filter-crashed");
+ else
+ ippSetString(job->attrs, &job->reasons, 0, "job-completed-with-errors");
}
}
* Update the printer and job state.
*/
- if (job_state != job->state_value)
+ if (set_job_state && job_state != job->state_value)
cupsdSetJobState(job, job_state, CUPSD_JOB_DEFAULT, "%s", message);
cupsdSetPrinterState(job->printer, printer_state,
if (job->history)
{
- if (job->status)
+ if (job->status &&
+ (job->state_value == IPP_JOB_ABORTED ||
+ job->state_value == IPP_JOB_STOPPED))
dump_job_history(job);
else
free_job_history(job);
cupsArrayRemove(PrintingJobs, job);
/*
- * Clear the printer <-> job association...
+ * Clear informational messages...
*/
- job->printer->job = NULL;
- job->printer = NULL;
+ if (job->status_level > CUPSD_LOG_ERROR)
+ job->printer->state_message[0] = '\0';
+
+ /*
+ * Apply any PPD updates...
+ */
+
+ if (job->num_keywords)
+ {
+ if (cupsdUpdatePrinterPPD(job->printer, job->num_keywords, job->keywords))
+ cupsdSetPrinterAttrs(job->printer);
+
+ cupsFreeOptions(job->num_keywords, job->keywords);
+
+ job->num_keywords = 0;
+ job->keywords = NULL;
+ }
/*
- * Try printing another job...
+ * Clear the printer <-> job association...
*/
- if (printer_state != IPP_PRINTER_STOPPED)
- cupsdCheckJobs();
+ job->printer->job = NULL;
+ job->printer = NULL;
}
char *optptr, /* Pointer to options */
*valptr; /* Pointer in value string */
ipp_attribute_t *attr; /* Current attribute */
- _pwg_t *pwg; /* PWG->PPD mapping data */
+ _ppd_cache_t *pc; /* PPD cache and mapping data */
int num_pwgppds; /* Number of PWG->PPD options */
cups_option_t *pwgppds, /* PWG->PPD options */
*pwgppd, /* Current PWG->PPD option */
*preset; /* Current preset option */
- int output_mode, /* Output mode (if any) */
+ int print_color_mode,
+ /* Output mode (if any) */
print_quality; /* Print quality (if any) */
const char *ppd; /* PPD option choice */
int exact; /* Did we get an exact match? */
* First build an options array for any PWG->PPD mapped option/choice pairs.
*/
- pwg = job->printer->pwg;
+ pc = job->printer->pc;
num_pwgppds = 0;
pwgppds = NULL;
- if (pwg &&
+ if (pc &&
!ippFindAttribute(job->attrs,
"com.apple.print.DocumentTicket.PMSpoolFormat",
IPP_TAG_ZERO) &&
- (ippFindAttribute(job->attrs, "output-mode", IPP_TAG_ZERO) ||
+ !ippFindAttribute(job->attrs, "APPrinterPreset", IPP_TAG_ZERO) &&
+ (ippFindAttribute(job->attrs, "print-color-mode", IPP_TAG_ZERO) ||
ippFindAttribute(job->attrs, "print-quality", IPP_TAG_ZERO)))
{
/*
- * Map output-mode and print-quality to a preset...
+ * Map print-color-mode and print-quality to a preset...
*/
- if ((attr = ippFindAttribute(job->attrs, "output-mode",
+ if ((attr = ippFindAttribute(job->attrs, "print-color-mode",
IPP_TAG_KEYWORD)) != NULL &&
- !strcmp(attr->values[0].string.text, "monochrome"))
- output_mode = _PWG_OUTPUT_MODE_MONOCHROME;
+ !strcmp(attr->values[0].string.text, "monochrome"))
+ print_color_mode = _PWG_PRINT_COLOR_MODE_MONOCHROME;
else
- output_mode = _PWG_OUTPUT_MODE_COLOR;
+ print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR;
if ((attr = ippFindAttribute(job->attrs, "print-quality",
IPP_TAG_ENUM)) != NULL &&
else
print_quality = _PWG_PRINT_QUALITY_NORMAL;
- if (pwg->num_presets[output_mode][print_quality] == 0)
+ if (pc->num_presets[print_color_mode][print_quality] == 0)
{
/*
* Try to find a preset that works so that we maximize the chances of us
* getting a good print using IPP attributes.
*/
- if (pwg->num_presets[output_mode][_PWG_PRINT_QUALITY_NORMAL] > 0)
+ if (pc->num_presets[print_color_mode][_PWG_PRINT_QUALITY_NORMAL] > 0)
print_quality = _PWG_PRINT_QUALITY_NORMAL;
- else if (pwg->num_presets[_PWG_OUTPUT_MODE_COLOR][print_quality] > 0)
- output_mode = _PWG_OUTPUT_MODE_COLOR;
+ else if (pc->num_presets[_PWG_PRINT_COLOR_MODE_COLOR][print_quality] > 0)
+ print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR;
else
{
- print_quality = _PWG_PRINT_QUALITY_NORMAL;
- output_mode = _PWG_OUTPUT_MODE_COLOR;
+ print_quality = _PWG_PRINT_QUALITY_NORMAL;
+ print_color_mode = _PWG_PRINT_COLOR_MODE_COLOR;
}
}
- if (pwg->num_presets[output_mode][print_quality] > 0)
+ if (pc->num_presets[print_color_mode][print_quality] > 0)
{
/*
* Copy the preset options as long as the corresponding names are not
* already defined in the IPP request...
*/
- for (i = pwg->num_presets[output_mode][print_quality],
- preset = pwg->presets[output_mode][print_quality];
+ for (i = pc->num_presets[print_color_mode][print_quality],
+ preset = pc->presets[print_color_mode][print_quality];
i > 0;
i --, preset ++)
{
}
}
- if (pwg)
+ if (pc)
{
- if (pwg->sides_option &&
- !ippFindAttribute(job->attrs, pwg->sides_option, IPP_TAG_ZERO) &&
- (attr = ippFindAttribute(job->attrs, "sides", IPP_TAG_KEYWORD)) != NULL)
- {
- /*
- * Add a duplex option...
- */
-
- if (!strcmp(attr->values[0].string.text, "one-sided"))
- num_pwgppds = cupsAddOption(pwg->sides_option, pwg->sides_1sided,
- num_pwgppds, &pwgppds);
- else if (!strcmp(attr->values[0].string.text, "two-sided-long-edge"))
- num_pwgppds = cupsAddOption(pwg->sides_option, pwg->sides_2sided_long,
- num_pwgppds, &pwgppds);
- else if (!strcmp(attr->values[0].string.text, "two-sided-short-edge"))
- num_pwgppds = cupsAddOption(pwg->sides_option, pwg->sides_2sided_short,
- num_pwgppds, &pwgppds);
- }
-
if (!ippFindAttribute(job->attrs, "InputSlot", IPP_TAG_ZERO) &&
!ippFindAttribute(job->attrs, "HPPaperSource", IPP_TAG_ZERO))
{
- if ((ppd = _pwgGetInputSlot(pwg, job->attrs, NULL)) != NULL)
- num_pwgppds = cupsAddOption(pwg->source_option, ppd, num_pwgppds,
+ if ((ppd = _ppdCacheGetInputSlot(pc, job->attrs, NULL)) != NULL)
+ num_pwgppds = cupsAddOption(pc->source_option, ppd, num_pwgppds,
&pwgppds);
- else if (!ippFindAttribute(job->attrs, "AP_D_InputSlot", IPP_TAG_ZERO))
- num_pwgppds = cupsAddOption("AP_D_InputSlot", "", num_pwgppds,
- &pwgppds);
}
-
if (!ippFindAttribute(job->attrs, "MediaType", IPP_TAG_ZERO) &&
- (ppd = _pwgGetMediaType(pwg, job->attrs, NULL)) != NULL)
+ (ppd = _ppdCacheGetMediaType(pc, job->attrs, NULL)) != NULL)
num_pwgppds = cupsAddOption("MediaType", ppd, num_pwgppds, &pwgppds);
if (!ippFindAttribute(job->attrs, "PageRegion", IPP_TAG_ZERO) &&
!ippFindAttribute(job->attrs, "PageSize", IPP_TAG_ZERO) &&
- (ppd = _pwgGetPageSize(pwg, job->attrs, NULL, &exact)) != NULL)
+ (ppd = _ppdCacheGetPageSize(pc, job->attrs, NULL, &exact)) != NULL)
{
num_pwgppds = cupsAddOption("PageSize", ppd, num_pwgppds, &pwgppds);
IPP_TAG_ZERO)) != NULL &&
(attr->value_tag == IPP_TAG_KEYWORD ||
attr->value_tag == IPP_TAG_NAME) &&
- (ppd = _pwgGetOutputBin(pwg, attr->values[0].string.text)) != NULL)
+ (ppd = _ppdCacheGetOutputBin(pc, attr->values[0].string.text)) != NULL)
+ {
+ /*
+ * Map output-bin to OutputBin option...
+ */
+
num_pwgppds = cupsAddOption("OutputBin", ppd, num_pwgppds, &pwgppds);
+ }
+
+ if (pc->sides_option &&
+ !ippFindAttribute(job->attrs, pc->sides_option, IPP_TAG_ZERO) &&
+ (attr = ippFindAttribute(job->attrs, "sides", IPP_TAG_KEYWORD)) != NULL)
+ {
+ /*
+ * Map sides to duplex option...
+ */
+
+ if (!strcmp(attr->values[0].string.text, "one-sided"))
+ num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_1sided,
+ num_pwgppds, &pwgppds);
+ else if (!strcmp(attr->values[0].string.text, "two-sided-long-edge"))
+ num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_2sided_long,
+ num_pwgppds, &pwgppds);
+ else if (!strcmp(attr->values[0].string.text, "two-sided-short-edge"))
+ num_pwgppds = cupsAddOption(pc->sides_option, pc->sides_2sided_short,
+ num_pwgppds, &pwgppds);
+ }
+
+ /*
+ * Map finishings values...
+ */
+
+ num_pwgppds = _ppdCacheGetFinishingOptions(pc, job->attrs,
+ IPP_FINISHINGS_NONE, num_pwgppds,
+ &pwgppds);
}
/*
* Then allocate/reallocate the option buffer as needed...
*/
+ if (newlength == 0) /* This can never happen, but Clang */
+ newlength = 1; /* thinks it can... */
+
if (newlength > optlength || !options)
{
if (!options)
if (!optptr)
{
cupsdLogJob(job, CUPSD_LOG_CRIT,
- "Unable to allocate " CUPS_LLFMT " bytes for option buffer!",
+ "Unable to allocate " CUPS_LLFMT " bytes for option buffer.",
CUPS_LLCAST newlength);
return (NULL);
}
attr->value_tag == IPP_TAG_MIMETYPE ||
attr->value_tag == IPP_TAG_NAMELANG ||
attr->value_tag == IPP_TAG_TEXTLANG ||
- (attr->value_tag == IPP_TAG_URI && strcmp(attr->name, "job-uuid")) ||
+ (attr->value_tag == IPP_TAG_URI && strcmp(attr->name, "job-uuid") &&
+ strcmp(attr->name, "job-authorization-uri")) ||
attr->value_tag == IPP_TAG_URISCHEME ||
attr->value_tag == IPP_TAG_BEGIN_COLLECTION) /* Not yet supported */
continue;
- if (!strcmp(attr->name, "job-hold-until"))
+ if (!strcmp(attr->name, "job-hold-until") ||
+ !strcmp(attr->name, "job-id") ||
+ !strcmp(attr->name, "job-k-octets") ||
+ !strcmp(attr->name, "job-media-sheets") ||
+ !strcmp(attr->name, "job-media-sheets-completed") ||
+ !strcmp(attr->name, "job-state") ||
+ !strcmp(attr->name, "job-state-reasons"))
continue;
if (!strncmp(attr->name, "job-", 4) &&
+ strcmp(attr->name, "job-account-id") &&
+ strcmp(attr->name, "job-accounting-user-id") &&
+ strcmp(attr->name, "job-authorization-uri") &&
strcmp(attr->name, "job-billing") &&
strcmp(attr->name, "job-impressions") &&
strcmp(attr->name, "job-originating-host-name") &&
+ strcmp(attr->name, "job-password") &&
+ strcmp(attr->name, "job-password-encryption") &&
strcmp(attr->name, "job-uuid") &&
!(job->printer->type & CUPS_PRINTER_REMOTE))
continue;
!strncmp(attr->name, "number-up", 9) ||
!strcmp(attr->name, "page-ranges") ||
!strcmp(attr->name, "page-set") ||
- !strcasecmp(attr->name, "AP_FIRSTPAGE_InputSlot") ||
- !strcasecmp(attr->name, "AP_FIRSTPAGE_ManualFeed") ||
- !strcasecmp(attr->name, "com.apple.print.PrintSettings."
+ !_cups_strcasecmp(attr->name, "AP_FIRSTPAGE_InputSlot") ||
+ !_cups_strcasecmp(attr->name, "AP_FIRSTPAGE_ManualFeed") ||
+ !_cups_strcasecmp(attr->name, "com.apple.print.PrintSettings."
"PMTotalSidesImaged..n.") ||
- !strcasecmp(attr->name, "com.apple.print.PrintSettings."
+ !_cups_strcasecmp(attr->name, "com.apple.print.PrintSettings."
"PMTotalBeginPages..n.")) &&
banner_page)
continue;
*/
if (optptr > options)
- strlcat(optptr, " ", optlength - (optptr - options));
+ strlcat(optptr, " ", optlength - (size_t)(optptr - options));
if (attr->value_tag != IPP_TAG_BOOLEAN)
{
- strlcat(optptr, attr->name, optlength - (optptr - options));
- strlcat(optptr, "=", optlength - (optptr - options));
+ strlcat(optptr, attr->name, optlength - (size_t)(optptr - options));
+ strlcat(optptr, "=", optlength - (size_t)(optptr - options));
}
for (i = 0; i < attr->num_values; i ++)
{
if (i)
- strlcat(optptr, ",", optlength - (optptr - options));
+ strlcat(optptr, ",", optlength - (size_t)(optptr - options));
optptr += strlen(optptr);
{
case IPP_TAG_INTEGER :
case IPP_TAG_ENUM :
- snprintf(optptr, optlength - (optptr - options),
+ snprintf(optptr, optlength - (size_t)(optptr - options),
"%d", attr->values[i].integer);
break;
case IPP_TAG_BOOLEAN :
if (!attr->values[i].boolean)
- strlcat(optptr, "no", optlength - (optptr - options));
+ strlcat(optptr, "no", optlength - (size_t)(optptr - options));
- strlcat(optptr, attr->name,
- optlength - (optptr - options));
+ strlcat(optptr, attr->name, optlength - (size_t)(optptr - options));
break;
case IPP_TAG_RANGE :
if (attr->values[i].range.lower == attr->values[i].range.upper)
- snprintf(optptr, optlength - (optptr - options) - 1,
+ snprintf(optptr, optlength - (size_t)(optptr - options) - 1,
"%d", attr->values[i].range.lower);
else
- snprintf(optptr, optlength - (optptr - options) - 1,
+ snprintf(optptr, optlength - (size_t)(optptr - options) - 1,
"%d-%d", attr->values[i].range.lower,
attr->values[i].range.upper);
break;
case IPP_TAG_RESOLUTION :
- snprintf(optptr, optlength - (optptr - options) - 1,
+ snprintf(optptr, optlength - (size_t)(optptr - options) - 1,
"%dx%d%s", attr->values[i].resolution.xres,
attr->values[i].resolution.yres,
attr->values[i].resolution.units == IPP_RES_PER_INCH ?
- "dpi" : "dpc");
+ "dpi" : "dpcm");
break;
case IPP_TAG_STRING :
for (i = num_pwgppds, pwgppd = pwgppds; i > 0; i --, pwgppd ++)
{
*optptr++ = ' ';
- strcpy(optptr, pwgppd->name);
+ strlcpy(optptr, pwgppd->name, optlength - (size_t)(optptr - options));
optptr += strlen(optptr);
*optptr++ = '=';
- strcpy(optptr, pwgppd->value);
+ strlcpy(optptr, pwgppd->value, optlength - (size_t)(optptr - options));
optptr += strlen(optptr);
}
*/
bytes ++; /* " " separator */
- bytes += attr->num_values; /* "," separators */
+ bytes += (size_t)attr->num_values; /* "," separators */
/*
* Boolean attributes appear as "foo,nofoo,foo,nofoo", while
if (attr->value_tag != IPP_TAG_BOOLEAN)
bytes += strlen(attr->name);
else
- bytes += attr->num_values * strlen(attr->name);
+ bytes += (size_t)attr->num_values * strlen(attr->name);
/*
* Now add the size required for each value in the attribute...
* Minimum value of a signed integer is -2147483647, or 11 digits.
*/
- bytes += attr->num_values * 11;
+ bytes += (size_t)attr->num_values * 11;
break;
case IPP_TAG_BOOLEAN :
* 23 characters max.
*/
- bytes += attr->num_values * 23;
+ bytes += (size_t)attr->num_values * 23;
break;
case IPP_TAG_RESOLUTION :
* suffixed by the units, or 26 characters max.
*/
- bytes += attr->num_values * 26;
+ bytes += (size_t)attr->num_values * 26;
break;
case IPP_TAG_STRING :
* Open the job.cache file...
*/
- if ((fp = cupsFileOpen(filename, "r")) == NULL)
+ if ((fp = cupsdOpenConfFile(filename)) == NULL)
{
- if (errno != ENOENT)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to open job cache file \"%s\": %s",
- filename, strerror(errno));
-
load_request_root();
-
return;
}
while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
{
- if (!strcasecmp(line, "NextJobId"))
+ if (!_cups_strcasecmp(line, "NextJobId"))
{
if (value)
NextJobId = atoi(value);
}
- else if (!strcasecmp(line, "<Job"))
+ else if (!_cups_strcasecmp(line, "<Job"))
{
if (job)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Missing </Job> directive on line %d!",
- linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Missing </Job> directive on line %d of %s.", linenum, filename);
continue;
}
if (!value)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Missing job ID on line %d!", linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Missing job ID on line %d of %s.", linenum, filename);
continue;
}
if (jobid < 1)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad job ID %d on line %d!", jobid,
- linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad job ID %d on line %d of %s.", jobid, linenum, filename);
continue;
}
snprintf(jobfile, sizeof(jobfile), "%s/c%05d", RequestRoot, jobid);
if (access(jobfile, 0))
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] Files have gone away!",
- jobid);
- continue;
+ snprintf(jobfile, sizeof(jobfile), "%s/c%05d.N", RequestRoot, jobid);
+ if (access(jobfile, 0))
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR, "[Job %d] Files have gone away.",
+ jobid);
+
+ /*
+ * job.cache file is out-of-date compared to spool directory; load
+ * that instead...
+ */
+
+ cupsFileClose(fp);
+ load_request_root();
+ return;
+ }
}
job = calloc(1, sizeof(cupsd_job_t));
if (!job)
{
cupsdLogMessage(CUPSD_LOG_EMERG,
- "[Job %d] Unable to allocate memory for job!", jobid);
+ "[Job %d] Unable to allocate memory for job.", jobid);
break;
}
job->status_pipes[0] = -1;
job->status_pipes[1] = -1;
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] Loading from cache...",
- job->id);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Loading from cache...");
}
else if (!job)
{
cupsdLogMessage(CUPSD_LOG_ERROR,
- "Missing <Job #> directive on line %d!", linenum);
+ "Missing <Job #> directive on line %d of %s.", linenum, filename);
continue;
}
- else if (!strcasecmp(line, "</Job>"))
+ else if (!_cups_strcasecmp(line, "</Job>"))
{
cupsArrayAdd(Jobs, job);
if (job->state_value <= IPP_JOB_STOPPED && cupsdLoadJob(job))
cupsArrayAdd(ActiveJobs, job);
+ else if (job->state_value > IPP_JOB_STOPPED)
+ {
+ if (!job->completed_time || !job->creation_time || !job->name || !job->koctets)
+ {
+ cupsdLoadJob(job);
+ unload_job(job);
+ }
+ }
job = NULL;
}
else if (!value)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Missing value on line %d!", linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Missing value on line %d of %s.", linenum, filename);
continue;
}
- else if (!strcasecmp(line, "State"))
+ else if (!_cups_strcasecmp(line, "State"))
{
job->state_value = (ipp_jstate_t)atoi(value);
else if (job->state_value > IPP_JOB_COMPLETED)
job->state_value = IPP_JOB_COMPLETED;
}
- else if (!strcasecmp(line, "HoldUntil"))
+ else if (!_cups_strcasecmp(line, "Name"))
+ {
+ cupsdSetString(&(job->name), value);
+ }
+ else if (!_cups_strcasecmp(line, "Created"))
+ {
+ job->creation_time = strtol(value, NULL, 10);
+ }
+ else if (!_cups_strcasecmp(line, "Completed"))
+ {
+ job->completed_time = strtol(value, NULL, 10);
+ }
+ else if (!_cups_strcasecmp(line, "HoldUntil"))
{
- job->hold_until = atoi(value);
+ job->hold_until = strtol(value, NULL, 10);
}
- else if (!strcasecmp(line, "Priority"))
+ else if (!_cups_strcasecmp(line, "Priority"))
{
job->priority = atoi(value);
}
- else if (!strcasecmp(line, "Username"))
+ else if (!_cups_strcasecmp(line, "Username"))
{
cupsdSetString(&job->username, value);
}
- else if (!strcasecmp(line, "Destination"))
+ else if (!_cups_strcasecmp(line, "Destination"))
{
cupsdSetString(&job->dest, value);
}
- else if (!strcasecmp(line, "DestType"))
+ else if (!_cups_strcasecmp(line, "DestType"))
{
job->dtype = (cups_ptype_t)atoi(value);
}
- else if (!strcasecmp(line, "NumFiles"))
+ else if (!_cups_strcasecmp(line, "KOctets"))
+ {
+ job->koctets = atoi(value);
+ }
+ else if (!_cups_strcasecmp(line, "NumFiles"))
{
job->num_files = atoi(value);
if (job->num_files < 0)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad NumFiles value %d on line %d!",
- job->num_files, linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad NumFiles value %d on line %d of %s.", job->num_files, linenum, filename);
job->num_files = 0;
continue;
}
job->id);
if (access(jobfile, 0))
{
- cupsdLogMessage(CUPSD_LOG_INFO, "[Job %d] Data files have gone away!",
- job->id);
+ cupsdLogJob(job, CUPSD_LOG_INFO, "Data files have gone away.");
job->num_files = 0;
continue;
}
- job->filetypes = calloc(job->num_files, sizeof(mime_type_t *));
- job->compressions = calloc(job->num_files, sizeof(int));
+ job->filetypes = calloc((size_t)job->num_files, sizeof(mime_type_t *));
+ job->compressions = calloc((size_t)job->num_files, sizeof(int));
if (!job->filetypes || !job->compressions)
{
- cupsdLogMessage(CUPSD_LOG_EMERG,
- "[Job %d] Unable to allocate memory for %d files!",
- job->id, job->num_files);
+ cupsdLogJob(job, CUPSD_LOG_EMERG,
+ "Unable to allocate memory for %d files.",
+ job->num_files);
break;
}
}
}
- else if (!strcasecmp(line, "File"))
+ else if (!_cups_strcasecmp(line, "File"))
{
int number, /* File number */
compression; /* Compression value */
if (sscanf(value, "%d%*[ \t]%15[^/]/%255s%d", &number, super, type,
&compression) != 4)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File on line %d!", linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File on line %d of %s.", linenum, filename);
continue;
}
if (number < 1 || number > job->num_files)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File number %d on line %d!",
- number, linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad File number %d on line %d of %s.", number, linenum, filename);
continue;
}
* If the original MIME type is unknown, auto-type it!
*/
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "[Job %d] Unknown MIME type %s/%s for file %d!",
- job->id, super, type, number + 1);
+ cupsdLogJob(job, CUPSD_LOG_ERROR,
+ "Unknown MIME type %s/%s for file %d.",
+ super, type, number + 1);
snprintf(jobfile, sizeof(jobfile), "%s/d%05d-%03d", RequestRoot,
job->id, number + 1);
}
}
else
- cupsdLogMessage(CUPSD_LOG_ERROR, "Unknown %s directive on line %d!",
- line, linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Unknown %s directive on line %d of %s.", line, linenum, filename);
+ }
+
+ if (job)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Missing </Job> directive on line %d of %s.", linenum, filename);
+ cupsdDeleteJob(job, CUPSD_JOB_PURGE);
}
cupsFileClose(fp);
while (cupsFileGetConf(fp, line, sizeof(line), &value, &linenum))
{
- if (!strcasecmp(line, "NextJobId"))
+ if (!_cups_strcasecmp(line, "NextJobId"))
{
if (value)
{
if ((job = calloc(sizeof(cupsd_job_t), 1)) == NULL)
{
- cupsdLogMessage(CUPSD_LOG_ERROR, "Ran out of memory for jobs!");
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Ran out of memory for jobs.");
cupsDirClose(dir);
return;
}
else
unload_job(job);
}
+ else
+ free(job);
}
cupsDirClose(dir);
/*
- * 'set_hold_until()' - Set the hold time and update job-hold-until attribute.
+ * 'remove_job_files()' - Remove the document files for a job.
*/
static void
-set_hold_until(cupsd_job_t *job, /* I - Job to update */
- time_t holdtime) /* I - Hold until time */
+remove_job_files(cupsd_job_t *job) /* I - Job */
{
- ipp_attribute_t *attr; /* job-hold-until attribute */
- struct tm *holddate; /* Hold date */
- char holdstr[64]; /* Hold time */
+ int i; /* Looping var */
+ char filename[1024]; /* Document filename */
- /*
- * Set the hold_until value and hold the job...
- */
+ if (job->num_files <= 0)
+ return;
+
+ for (i = 1; i <= job->num_files; i ++)
+ {
+ snprintf(filename, sizeof(filename), "%s/d%05d-%03d", RequestRoot,
+ job->id, i);
+ cupsdUnlinkOrRemoveFile(filename);
+ }
- cupsdLogMessage(CUPSD_LOG_DEBUG, "set_hold_until: hold_until = %d",
- (int)holdtime);
+ free(job->filetypes);
+ free(job->compressions);
- job->state->values[0].integer = IPP_JOB_HELD;
- job->state_value = IPP_JOB_HELD;
- job->hold_until = holdtime;
+ job->file_time = 0;
+ job->num_files = 0;
+ job->filetypes = NULL;
+ job->compressions = NULL;
- /*
- * Update the job-hold-until attribute with a string representing GMT
- * time (HH:MM:SS)...
- */
+ LastEvent |= CUPSD_EVENT_PRINTER_STATE_CHANGED;
+}
+
+
+/*
+ * 'remove_job_history()' - Remove the control file for a job.
+ */
- holddate = gmtime(&holdtime);
- snprintf(holdstr, sizeof(holdstr), "%d:%d:%d", holddate->tm_hour,
- holddate->tm_min, holddate->tm_sec);
+static void
+remove_job_history(cupsd_job_t *job) /* I - Job */
+{
+ char filename[1024]; /* Control filename */
- if ((attr = ippFindAttribute(job->attrs, "job-hold-until",
- IPP_TAG_KEYWORD)) == NULL)
- attr = ippFindAttribute(job->attrs, "job-hold-until", IPP_TAG_NAME);
/*
- * Either add the attribute or update the value of the existing one
+ * Remove the job info file...
*/
- if (attr == NULL)
- ippAddString(job->attrs, IPP_TAG_JOB, IPP_TAG_KEYWORD, "job-hold-until",
- NULL, holdstr);
- else
- cupsdSetString(&attr->values[0].string.text, holdstr);
+ snprintf(filename, sizeof(filename), "%s/c%05d", RequestRoot,
+ job->id);
+ cupsdUnlinkOrRemoveFile(filename);
- job->dirty = 1;
- cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ LastEvent |= CUPSD_EVENT_PRINTER_STATE_CHANGED;
}
set_time(cupsd_job_t *job, /* I - Job to update */
const char *name) /* I - Name of attribute */
{
+ char date_name[128]; /* date-time-at-xxx */
ipp_attribute_t *attr; /* Time attribute */
+ time_t curtime; /* Current time */
+
+ curtime = time(NULL);
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "%s=%ld", name, (long)curtime);
if ((attr = ippFindAttribute(job->attrs, name, IPP_TAG_ZERO)) != NULL)
{
attr->value_tag = IPP_TAG_INTEGER;
- attr->values[0].integer = time(NULL);
+ attr->values[0].integer = curtime;
+ }
+
+ snprintf(date_name, sizeof(date_name), "date-%s", name);
+
+ if ((attr = ippFindAttribute(job->attrs, date_name, IPP_TAG_ZERO)) != NULL)
+ {
+ attr->value_tag = IPP_TAG_DATE;
+ ippSetDate(job->attrs, &attr, 0, ippTimeToDate(curtime));
+ }
+
+ if (!strcmp(name, "time-at-completed"))
+ {
+ job->completed_time = curtime;
+
+ if (JobHistory < INT_MAX && attr)
+ job->history_time = attr->values[0].integer + JobHistory;
+ else
+ job->history_time = INT_MAX;
+
+ if (job->history_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->history_time;
+
+ if (JobFiles < INT_MAX && attr)
+ job->file_time = attr->values[0].integer + JobFiles;
+ else
+ job->file_time = INT_MAX;
+
+ if (job->file_time < JobHistoryUpdate || !JobHistoryUpdate)
+ JobHistoryUpdate = job->file_time;
+
+ cupsdLogMessage(CUPSD_LOG_DEBUG2, "set_time: JobHistoryUpdate=%ld",
+ (long)JobHistoryUpdate);
}
}
start_job(cupsd_job_t *job, /* I - Job ID */
cupsd_printer_t *printer) /* I - Printer to print job */
{
+ const char *filename; /* Support filename */
+ ipp_attribute_t *cancel_after = ippFindAttribute(job->attrs,
+ "job-cancel-after",
+ IPP_TAG_INTEGER);
+ /* job-cancel-after attribute */
+
+
cupsdLogMessage(CUPSD_LOG_DEBUG2, "start_job(job=%p(%d), printer=%p(%s))",
job, job->id, printer, printer->name);
if (job->num_files == 0)
{
+ ippSetString(job->attrs, &job->reasons, 0, "aborted-by-system");
cupsdSetJobState(job, IPP_JOB_ABORTED, CUPSD_JOB_DEFAULT,
"Aborting job because it has no files.");
return;
if (!cupsdLoadJob(job))
return;
+ if (!job->printer_message)
+ job->printer_message = ippFindAttribute(job->attrs,
+ "job-printer-state-message",
+ IPP_TAG_TEXT);
+ if (job->printer_message)
+ ippSetString(job->attrs, &job->printer_message, 0, "");
+
+ ippSetString(job->attrs, &job->reasons, 0, "job-printing");
cupsdSetJobState(job, IPP_JOB_PROCESSING, CUPSD_JOB_DEFAULT, NULL);
cupsdSetPrinterState(printer, IPP_PRINTER_PROCESSING, 0);
+ cupsdSetPrinterReasons(printer, "-cups-remote-pending,"
+ "cups-remote-pending-held,"
+ "cups-remote-processing,"
+ "cups-remote-stopped,"
+ "cups-remote-canceled,"
+ "cups-remote-aborted,"
+ "cups-remote-completed");
job->cost = 0;
job->current_file = 0;
+ job->file_time = 0;
+ job->history_time = 0;
job->progress = 0;
job->printer = printer;
printer->job = job;
+ if (cancel_after)
+ job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0);
+ else if (MaxJobTime > 0)
+ job->cancel_time = time(NULL) + MaxJobTime;
+ else
+ job->cancel_time = 0;
+
+ /*
+ * Check for support files...
+ */
+
+ cupsdSetPrinterReasons(job->printer, "-cups-missing-filter-warning,"
+ "cups-insecure-filter-warning");
+
+ if (printer->pc)
+ {
+ for (filename = (const char *)cupsArrayFirst(printer->pc->support_files);
+ filename;
+ filename = (const char *)cupsArrayNext(printer->pc->support_files))
+ {
+ if (_cupsFileCheck(filename, _CUPS_FILE_CHECK_FILE, !RunUser,
+ cupsdLogFCMessage, printer))
+ break;
+ }
+ }
+
/*
* Setup the last exit status and security profiles...
*/
- job->status = 0;
- job->profile = cupsdCreateProfile(job->id);
+ job->status = 0;
+ job->profile = cupsdCreateProfile(job->id, 0);
+ job->bprofile = cupsdCreateProfile(job->id, 1);
/*
* Create the status pipes and buffer...
cupsdDestroyProfile(job->profile);
job->profile = NULL;
+ cupsdDestroyProfile(job->bprofile);
+ job->bprofile = NULL;
return;
}
job->status_buffer = cupsdStatBufNew(job->status_pipes[0], NULL);
job->status_level = CUPSD_LOG_INFO;
- if (job->printer_message)
- cupsdSetString(&(job->printer_message->values[0].string.text), "");
-
/*
* Create the backchannel pipes and make them non-blocking...
*/
cupsdDestroyProfile(job->profile);
job->profile = NULL;
+ cupsdDestroyProfile(job->bprofile);
+ job->bprofile = NULL;
return;
}
cupsdDestroyProfile(job->profile);
job->profile = NULL;
+ cupsdDestroyProfile(job->bprofile);
+ job->bprofile = NULL;
return;
}
FilterLevel -= job->cost;
job->cost = 0;
- if (action == CUPSD_JOB_DEFAULT && !job->kill_time)
+ if (action == CUPSD_JOB_DEFAULT && !job->kill_time && job->backend > 0)
job->kill_time = time(NULL) + JobKillDelay;
else if (action >= CUPSD_JOB_FORCE)
job->kill_time = 0;
if (!job->attrs)
return;
- cupsdLogMessage(CUPSD_LOG_DEBUG, "[Job %d] Unloading...", job->id);
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "Unloading...");
ippDelete(job->attrs);
job->attrs = NULL;
job->state = NULL;
+ job->reasons = NULL;
+ job->impressions = NULL;
job->sheets = NULL;
job->job_sheets = NULL;
job->printer_message = NULL;
*ptr; /* Pointer update... */
int loglevel, /* Log level for message */
event = 0; /* Events? */
+ cupsd_printer_t *printer = job->printer;
+ /* Printer */
static const char * const levels[] = /* Log levels */
{
"NONE",
cupsdLogJob(job, CUPSD_LOG_DEBUG, "PAGE: %s", message);
+ if (job->impressions)
+ {
+ if (!_cups_strncasecmp(message, "total ", 6))
+ {
+ /*
+ * Got a total count of pages from a backend or filter...
+ */
+
+ copies = atoi(message + 6);
+ copies -= ippGetInteger(job->impressions, 0); /* Just track the delta */
+ }
+ else if (!sscanf(message, "%*d%d", &copies))
+ copies = 1;
+
+ ippSetInteger(job->attrs, &job->impressions, 0, ippGetInteger(job->impressions, 0) + copies);
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
+
if (job->sheets)
{
- if (!strncasecmp(message, "total ", 6))
+ if (!_cups_strncasecmp(message, "total ", 6))
{
/*
* Got a total count of pages from a backend or filter...
*/
copies = atoi(message + 6);
- copies -= job->sheets->values[0].integer; /* Just track the delta */
+ copies -= ippGetInteger(job->sheets, 0); /* Just track the delta */
}
else if (!sscanf(message, "%*d%d", &copies))
copies = 1;
- job->sheets->values[0].integer += copies;
+ ippSetInteger(job->attrs, &job->sheets, 0, ippGetInteger(job->sheets, 0) + copies);
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
if (job->printer->page_limit)
cupsdUpdateQuota(job->printer, job->username, copies, 0);
cupsdLogPage(job, message);
if (job->sheets)
- cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job,
- "Printed %d page(s).", job->sheets->values[0].integer);
+ cupsdAddEvent(CUPSD_EVENT_JOB_PROGRESS, job->printer, job, "Printed %d page(s).", ippGetInteger(job->sheets, 0));
+ }
+ else if (loglevel == CUPSD_LOG_JOBSTATE)
+ {
+ /*
+ * Support "keyword" to set job-state-reasons to the specified keyword.
+ * This is sufficient for the current paid printing stuff.
+ */
+
+ cupsdLogJob(job, CUPSD_LOG_DEBUG, "JOBSTATE: %s", message);
+
+ if (!strcmp(message, "cups-retry-as-raster"))
+ job->retry_as_raster = 1;
+ else
+ ippSetString(job->attrs, &job->reasons, 0, message);
}
else if (loglevel == CUPSD_LOG_STATE)
{
cupsdStopPrinter(job->printer, 1);
return;
}
- else if (cupsdSetPrinterReasons(job->printer, message))
+ else if (message[0] && cupsdSetPrinterReasons(job->printer, message))
{
- cupsdAddPrinterHistory(job->printer);
event |= CUPSD_EVENT_PRINTER_STATE;
+
+ if (MaxJobTime > 0)
+ {
+ /*
+ * Reset cancel time after connecting to the device...
+ */
+
+ for (i = 0; i < job->printer->num_reasons; i ++)
+ if (!strcmp(job->printer->reasons[i], "connecting-to-device"))
+ break;
+
+ if (i >= job->printer->num_reasons)
+ {
+ ipp_attribute_t *cancel_after = ippFindAttribute(job->attrs,
+ "job-cancel-after",
+ IPP_TAG_INTEGER);
+ /* job-cancel-after attribute */
+
+ if (cancel_after)
+ job->cancel_time = time(NULL) + ippGetInteger(cancel_after, 0);
+ else
+ job->cancel_time = time(NULL) + MaxJobTime;
+ }
+ }
}
update_job_attrs(job, 0);
cups_option_t *attrs; /* Attributes */
const char *attr; /* Attribute */
-
cupsdLogJob(job, CUPSD_LOG_DEBUG, "ATTR: %s", message);
num_attrs = cupsParseOptions(message, 0, &attrs);
+ if ((attr = cupsGetOption("auth-info-default", num_attrs,
+ attrs)) != NULL)
+ {
+ job->printer->num_options = cupsAddOption("auth-info", attr,
+ job->printer->num_options,
+ &(job->printer->options));
+ cupsdSetPrinterAttrs(job->printer);
+
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
if ((attr = cupsGetOption("auth-info-required", num_attrs,
attrs)) != NULL)
{
cupsdSetAuthInfoRequired(job->printer, attr, NULL);
cupsdSetPrinterAttrs(job->printer);
- if (job->printer->type & CUPS_PRINTER_DISCOVERED)
- cupsdMarkDirty(CUPSD_DIRTY_REMOTE);
- else
- cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
}
if ((attr = cupsGetOption("job-media-progress", num_attrs,
* Set attribute(s)...
*/
- int num_keywords; /* Number of keywords */
- cups_option_t *keywords; /* Keywords */
-
-
cupsdLogJob(job, CUPSD_LOG_DEBUG, "PPD: %s", message);
- num_keywords = cupsParseOptions(message, 0, &keywords);
-
- if (cupsdUpdatePrinterPPD(job->printer, num_keywords, keywords))
- cupsdSetPrinterAttrs(job->printer);
-
- cupsFreeOptions(num_keywords, keywords);
+ job->num_keywords = cupsParseOptions(message, job->num_keywords,
+ &job->keywords);
}
else
{
else
ptr = message;
- cupsdLogJob(job, loglevel, "%s", ptr);
+ if (*ptr)
+ cupsdLogJob(job, loglevel == CUPSD_LOG_INFO ? CUPSD_LOG_DEBUG : loglevel, "%s", ptr);
if (loglevel < CUPSD_LOG_DEBUG &&
strcmp(job->printer->state_message, ptr))
{
strlcpy(job->printer->state_message, ptr,
sizeof(job->printer->state_message));
- cupsdAddPrinterHistory(job->printer);
event |= CUPSD_EVENT_PRINTER_STATE | CUPSD_EVENT_JOB_PROGRESS;
- if (loglevel < job->status_level)
+ if (loglevel <= job->status_level && job->status_level > CUPSD_LOG_ERROR)
{
/*
* Some messages show in the job-printer-state-message attribute...
finalize_job(job, 1);
/*
- * Check for new jobs...
+ * Try printing another job...
*/
- cupsdCheckJobs();
+ if (printer->state != IPP_PRINTER_STOPPED)
+ cupsdCheckJobs();
}
}
if (job->state_value != IPP_JOB_PROCESSING &&
job->status_level == CUPSD_LOG_INFO)
- cupsdSetString(&(job->printer_message->values[0].string.text), "");
+ {
+ ippSetString(job->attrs, &job->printer_message, 0, "");
+
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
else if (job->printer->state_message[0] && do_message)
- cupsdSetString(&(job->printer_message->values[0].string.text),
- job->printer->state_message);
+ {
+ ippSetString(job->attrs, &job->printer_message, 0, job->printer->state_message);
+
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+ }
/*
* ... and the printer-state-reasons value...
for (i = 0; i < num_reasons; i ++)
job->printer_reasons->values[i].string.text = _cupsStrAlloc(reasons[i]);
-}
-
-/*
- * End of "$Id: job.c 7902 2008-09-03 14:20:17Z mike $".
- */
+ job->dirty = 1;
+ cupsdMarkDirty(CUPSD_DIRTY_JOBS);
+}
projects / thirdparty / cups.git / blobdiff