/*
- * "$Id: printers.c 7968 2008-09-19 23:03:01Z mike $"
+ * Printer routines for the CUPS scheduler.
*
- * Printer routines for the CUPS scheduler.
+ * Copyright © 2007-2018 by Apple Inc.
+ * Copyright © 1997-2007 by Easy Software Products, all rights reserved.
*
- * Copyright 2007-2011 by Apple Inc.
- * Copyright 1997-2007 by Easy Software Products, all rights reserved.
- *
- * These coded instructions, statements, and computer programs are the
- * property of Apple Inc. and are protected by Federal copyright
- * law. Distribution and use rights are outlined in the file "LICENSE.txt"
- * which should have been included with this file. If this file is
- * file is missing or damaged, see the license at "http://www.cups.org/".
- *
- * Contents:
- *
- * cupsdAddPrinter() - Add a printer to the system.
- * cupsdCreateCommonData() - Create the common printer data.
- * cupsdDeleteAllPrinters() - Delete all printers from the system.
- * cupsdDeletePrinter() - Delete a printer from the system.
- * cupsdFindDest() - Find a destination in the list.
- * cupsdFindPrinter() - Find a printer in the list.
- * cupsdLoadAllPrinters() - Load printers from the printers.conf file.
- * cupsdRenamePrinter() - Rename a printer.
- * cupsdSaveAllPrinters() - Save all printer definitions to the
- * printers.conf file.
- * cupsdSetAuthInfoRequired() - Set the required authentication info.
- * cupsdSetDeviceURI() - Set the device URI for a printer.
- * cupsdSetPrinterAttr() - Set a printer attribute.
- * cupsdSetPrinterAttrs() - Set printer attributes based upon the PPD
- * file.
- * cupsdSetPrinterReasons() - Set/update the reasons strings.
- * cupsdSetPrinterState() - Update the current state of a printer.
- * cupsdStopPrinter() - Stop a printer from printing any jobs...
- * cupsdUpdatePrinterPPD() - Update keywords in a printer's PPD file.
- * cupsdUpdatePrinters() - Update printers after a partial reload.
- * cupsdValidateDest() - Validate a printer/class destination.
- * cupsdWritePrintcap() - Write a pseudo-printcap file for older
- * applications that need it...
- * add_printer_defaults() - Add name-default attributes to the printer
- * attributes.
- * add_printer_filter() - Add a MIME filter for a printer.
- * add_printer_formats() - Add document-format-supported values for a
- * printer.
- * compare_printers() - Compare two printers.
- * delete_printer_filters() - Delete all MIME filters for a printer.
- * dirty_printer() - Mark config and state files dirty for the
- * specified printer.
- * load_ppd() - Load a cached PPD file, updating the cache as
- * needed.
- * new_media_col() - Create a media-col collection value.
- * write_irix_config() - Update the config files used by the IRIX
- * desktop tools.
- * write_irix_state() - Update the status files used by IRIX printing
- * desktop tools.
- * write_xml_string() - Write a string with XML escaping.
+ * Licensed under Apache License v2.0. See the file "LICENSE" for more
+ * information.
*/
/*
#ifdef HAVE_SYS_VFS_H
# include <sys/vfs.h>
#endif /* HAVE_SYS_VFS_H */
+#ifdef __APPLE__
+# include <asl.h>
+#endif /* __APPLE__ */
/*
static void delete_printer_filters(cupsd_printer_t *p);
static void dirty_printer(cupsd_printer_t *p);
static void load_ppd(cupsd_printer_t *p);
-static ipp_t *new_media_col(_pwg_size_t *size, const char *source,
+static ipp_t *new_media_col(pwg_size_t *size, const char *source,
const char *type);
-#ifdef __sgi
-static void write_irix_config(cupsd_printer_t *p);
-static void write_irix_state(cupsd_printer_t *p);
-#endif /* __sgi */
static void write_xml_string(cups_file_t *fp, const char *s);
return (NULL);
}
+ _cupsRWInit(&p->lock);
+
cupsdSetString(&p->name, name);
cupsdSetString(&p->info, name);
cupsdSetString(&p->hostname, ServerName);
httpAssembleURIf(HTTP_URI_CODING_ALL, uri, sizeof(uri), "ipp", NULL,
ServerName, RemotePort, "/printers/%s", name);
cupsdSetString(&p->uri, uri);
- cupsdSetString(&p->uuid, _httpAssembleUUID(ServerName, RemotePort, name, 0,
- uuid, sizeof(uuid)));
+ cupsdSetString(&p->uuid, httpAssembleUUID(ServerName, RemotePort, name, 0,
+ uuid, sizeof(uuid)));
cupsdSetDeviceURI(p, "file:///dev/null");
- p->state = IPP_PRINTER_STOPPED;
- p->state_time = time(NULL);
- p->accepting = 0;
- p->shared = DefaultShared;
- p->filetype = mimeAddType(MimeDatabase, "printer", name);
+ p->config_time = time(NULL);
+ p->state = IPP_PRINTER_STOPPED;
+ p->state_time = time(NULL);
+ p->accepting = 0;
+ p->shared = DefaultShared;
+ p->filetype = mimeAddType(MimeDatabase, "printer", name);
cupsdSetString(&p->job_sheets[0], "none");
cupsdSetString(&p->job_sheets[1], "none");
"cupsdAddPrinter: Adding %s to Printers", p->name);
cupsArrayAdd(Printers, p);
- if (!ImplicitPrinters)
- ImplicitPrinters = cupsArrayNew(compare_printers, NULL);
-
/*
* Return the new printer...
*/
struct statfs spoolinfo; /* FS info for spool directory */
double spoolsize; /* FS size */
#endif /* HAVE_STATVFS */
- static const int nups[] = /* number-up-supported values */
+ static const char * const page_delivery[] =
+ { /* page-delivery-supported values */
+ "reverse-order",
+ "same-order"
+ };
+ static const char * const print_scaling[] =
+ { /* print-scaling-supported values */
+ "auto",
+ "auto-fit",
+ "fill",
+ "fit",
+ "none"
+ };
+ static const int number_up[] = /* number-up-supported values */
{ 1, 2, 4, 6, 9, 16 };
+ static const char * const number_up_layout[] =
+ { /* number-up-layout-supported values */
+ "btlr",
+ "btrl",
+ "lrbt",
+ "lrtb",
+ "rlbt",
+ "rltb",
+ "tblr",
+ "tbrl"
+ };
static const int orients[4] =/* orientation-requested-supported values */
{
IPP_PORTRAIT,
"third-shift",
"weekend"
};
+ static const char * const features[] =/* ipp-features-supported values */
+ {
+ "subscription-object"
+ };
static const char * const versions[] =/* ipp-versions-supported values */
{
"1.0",
};
static const int ops[] = /* operations-supported values */
{
- IPP_PRINT_JOB,
- IPP_VALIDATE_JOB,
- IPP_CREATE_JOB,
- IPP_SEND_DOCUMENT,
- IPP_CANCEL_JOB,
- IPP_GET_JOB_ATTRIBUTES,
- IPP_GET_JOBS,
- IPP_GET_PRINTER_ATTRIBUTES,
- IPP_HOLD_JOB,
- IPP_RELEASE_JOB,
- IPP_RESTART_JOB,
- IPP_PAUSE_PRINTER,
- IPP_RESUME_PRINTER,
- IPP_PURGE_JOBS,
- IPP_SET_PRINTER_ATTRIBUTES,
- IPP_SET_JOB_ATTRIBUTES,
- IPP_GET_PRINTER_SUPPORTED_VALUES,
- IPP_CREATE_PRINTER_SUBSCRIPTION,
- IPP_CREATE_JOB_SUBSCRIPTION,
- IPP_GET_SUBSCRIPTION_ATTRIBUTES,
- IPP_GET_SUBSCRIPTIONS,
- IPP_RENEW_SUBSCRIPTION,
- IPP_CANCEL_SUBSCRIPTION,
- IPP_GET_NOTIFICATIONS,
- IPP_ENABLE_PRINTER,
- IPP_DISABLE_PRINTER,
- IPP_HOLD_NEW_JOBS,
- IPP_RELEASE_HELD_NEW_JOBS,
- IPP_CANCEL_JOBS,
- IPP_CANCEL_MY_JOBS,
- IPP_CLOSE_JOB,
- CUPS_GET_DEFAULT,
- CUPS_GET_PRINTERS,
- CUPS_ADD_PRINTER,
- CUPS_DELETE_PRINTER,
- CUPS_GET_CLASSES,
- CUPS_ADD_CLASS,
- CUPS_DELETE_CLASS,
- CUPS_ACCEPT_JOBS,
- CUPS_REJECT_JOBS,
- CUPS_SET_DEFAULT,
- CUPS_GET_DEVICES,
- CUPS_GET_PPDS,
- CUPS_MOVE_JOB,
- CUPS_AUTHENTICATE_JOB,
- CUPS_GET_PPD,
- CUPS_GET_DOCUMENT,
- IPP_RESTART_JOB
+ IPP_OP_PRINT_JOB,
+ IPP_OP_VALIDATE_JOB,
+ IPP_OP_CREATE_JOB,
+ IPP_OP_SEND_DOCUMENT,
+ IPP_OP_CANCEL_JOB,
+ IPP_OP_GET_JOB_ATTRIBUTES,
+ IPP_OP_GET_JOBS,
+ IPP_OP_GET_PRINTER_ATTRIBUTES,
+ IPP_OP_HOLD_JOB,
+ IPP_OP_RELEASE_JOB,
+ IPP_OP_PAUSE_PRINTER,
+ IPP_OP_RESUME_PRINTER,
+ IPP_OP_PURGE_JOBS,
+ IPP_OP_SET_PRINTER_ATTRIBUTES,
+ IPP_OP_SET_JOB_ATTRIBUTES,
+ IPP_OP_GET_PRINTER_SUPPORTED_VALUES,
+ IPP_OP_CREATE_PRINTER_SUBSCRIPTIONS,
+ IPP_OP_CREATE_JOB_SUBSCRIPTIONS,
+ IPP_OP_GET_SUBSCRIPTION_ATTRIBUTES,
+ IPP_OP_GET_SUBSCRIPTIONS,
+ IPP_OP_RENEW_SUBSCRIPTION,
+ IPP_OP_CANCEL_SUBSCRIPTION,
+ IPP_OP_GET_NOTIFICATIONS,
+ IPP_OP_ENABLE_PRINTER,
+ IPP_OP_DISABLE_PRINTER,
+ IPP_OP_HOLD_NEW_JOBS,
+ IPP_OP_RELEASE_HELD_NEW_JOBS,
+ IPP_OP_CANCEL_JOBS,
+ IPP_OP_CANCEL_MY_JOBS,
+ IPP_OP_CLOSE_JOB,
+ IPP_OP_CUPS_GET_DEFAULT,
+ IPP_OP_CUPS_GET_PRINTERS,
+ IPP_OP_CUPS_ADD_MODIFY_PRINTER,
+ IPP_OP_CUPS_DELETE_PRINTER,
+ IPP_OP_CUPS_GET_CLASSES,
+ IPP_OP_CUPS_ADD_MODIFY_CLASS,
+ IPP_OP_CUPS_DELETE_CLASS,
+ IPP_OP_CUPS_ACCEPT_JOBS,
+ IPP_OP_CUPS_REJECT_JOBS,
+ IPP_OP_CUPS_SET_DEFAULT,
+ IPP_OP_CUPS_GET_DEVICES,
+ IPP_OP_CUPS_GET_PPDS,
+ IPP_OP_CUPS_MOVE_JOB,
+ IPP_OP_CUPS_AUTHENTICATE_JOB,
+ IPP_OP_CUPS_GET_PPD,
+ IPP_OP_CUPS_GET_DOCUMENT,
+ IPP_OP_RESTART_JOB
};
static const char * const charsets[] =/* charset-supported values */
{
{ /* job-creation-attributes-supported */
"copies",
"finishings",
+ "finishings-col",
"ipp-attribute-fidelity",
"job-hold-until",
"job-name",
"media-col",
"multiple-document-handling",
"number-up",
- "output-bin",
- "output-mode",
+ "number-up-layout",
"orientation-requested",
+ "output-bin",
+ "page-delivery",
"page-ranges",
+ "print-color-mode",
"print-quality",
+ "print-scaling",
"printer-resolution",
"sides"
};
"multiple-document-handling",
"number-up",
"output-bin",
- "output-mode",
"orientation-requested",
"page-ranges",
+ "print-color-mode",
"print-quality",
"printer-resolution",
"sides"
};
static const char * const printer_settable[] =
{ /* printer-settable-attributes-supported */
+ "printer-geo-location",
"printer-info",
- "printer-location"
+ "printer-location",
+ "printer-organization",
+ "printer-organizational-unit"
};
static const char * const which_jobs[] =
{ /* which-jobs-supported values */
ippAddString(CommonData, IPP_TAG_PRINTER, IPP_TAG_LANGUAGE,
"generated-natural-language-supported", NULL, DefaultLanguage);
+ /* ipp-features-supported */
+ ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "ipp-features-supported", sizeof(features) / sizeof(features[0]), NULL, features);
+
/* ipp-versions-supported */
ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_TAG_KEYWORD | IPP_TAG_COPY,
"ipp-versions-supported", sizeof(versions) / sizeof(versions[0]),
ippAddInteger(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"ippget-event-life", 15);
+ /* job-cancel-after-supported */
+ ippAddRange(CommonData, IPP_TAG_PRINTER, "job-cancel-after-supported",
+ 0, INT_MAX);
+
/* job-creation-attributes-supported */
ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_TAG_KEYWORD | IPP_TAG_COPY,
"job-creation-attributes-supported",
ippAddBoolean(CommonData, IPP_TAG_PRINTER, "job-ids-supported", 1);
/* job-k-octets-supported */
- ippAddInteger(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
- "job-k-octets-supported", k_supported);
+ ippAddRange(CommonData, IPP_TAG_PRINTER, "job-k-octets-supported", 0,
+ k_supported);
/* job-priority-supported */
ippAddInteger(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
ippAddInteger(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"multiple-operation-time-out", MultipleOperationTimeout);
+ /* multiple-operation-time-out-action */
+ ippAddString(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "multiple-operation-time-out-action", NULL, "process-job");
+
/* natural-language-configured (no IPP_TAG_COPY) */
ippAddString(CommonData, IPP_TAG_PRINTER, IPP_TAG_LANGUAGE,
"natural-language-configured", NULL, DefaultLanguage);
/* number-up-supported */
ippAddIntegers(CommonData, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
- "number-up-supported", sizeof(nups) / sizeof(nups[0]), nups);
+ "number-up-supported", sizeof(number_up) / sizeof(number_up[0]), number_up);
+
+ /* number-up-layout-supported */
+ ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "number-up-layout-supported", sizeof(number_up_layout) / sizeof(number_up_layout[0]), NULL, number_up_layout);
/* operations-supported */
ippAddIntegers(CommonData, IPP_TAG_PRINTER, IPP_TAG_ENUM,
- "operations-supported",
- sizeof(ops) / sizeof(ops[0]) + JobFiles - 1, ops);
+ "operations-supported", sizeof(ops) / sizeof(ops[0]), ops);
/* orientation-requested-supported */
ippAddIntegers(CommonData, IPP_TAG_PRINTER, IPP_TAG_ENUM,
"orientation-requested-supported", 4, orients);
+ /* page-delivery-supported */
+ ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "page-delivery-supported", sizeof(page_delivery) / sizeof(page_delivery[0]), NULL, page_delivery);
+
/* page-ranges-supported */
ippAddBoolean(CommonData, IPP_TAG_PRINTER, "page-ranges-supported", 1);
ippAddString(CommonData, IPP_TAG_PRINTER, IPP_TAG_KEYWORD | IPP_TAG_COPY,
"pdl-override-supported", NULL, "attempted");
+ /* print-scaling-supported */
+ ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "print-scaling-supported", sizeof(print_scaling) / sizeof(print_scaling[0]), NULL, print_scaling);
+
+ /* printer-get-attributes-supported */
+ ippAddString(CommonData, IPP_TAG_PRINTER, IPP_CONST_TAG(IPP_TAG_KEYWORD), "printer-get-attributes-supported", NULL, "document-format");
+
/* printer-op-policy-supported */
attr = ippAddStrings(CommonData, IPP_TAG_PRINTER, IPP_TAG_NAME | IPP_TAG_COPY,
"printer-op-policy-supported", cupsArrayCount(Policies),
{
int i, /* Looping var */
changed = 0; /* Class changed? */
-#ifdef __sgi
- char filename[1024]; /* Interface script filename */
-#endif /* __sgi */
cupsdLogMessage(CUPSD_LOG_DEBUG2, "cupsdDeletePrinter(p=%p(%s), update=%d)",
update ? "Job stopped due to printer being deleted." :
"Job stopped.");
- /*
- * If this printer is the next for browsing, point to the next one...
- */
-
- if (p == BrowseNext)
- {
- cupsArrayFind(Printers, p);
- BrowseNext = (cupsd_printer_t *)cupsArrayNext(Printers);
- }
-
/*
* Remove the printer from the list...
*/
"cupsdDeletePrinter: Removing %s from Printers", p->name);
cupsArrayRemove(Printers, p);
- if (p->type & CUPS_PRINTER_IMPLICIT)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "cupsdDeletePrinter: Removing %s from ImplicitPrinters",
- p->name);
- cupsArrayRemove(ImplicitPrinters, p);
- }
-
/*
- * Remove the dummy interface/icon/option files under IRIX...
+ * If p is the default printer, assign a different one...
*/
-#ifdef __sgi
- snprintf(filename, sizeof(filename), "/var/spool/lp/interface/%s", p->name);
- unlink(filename);
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/gui_interface/ELF/%s.gui",
- p->name);
- unlink(filename);
+ if (p == DefaultPrinter)
+ DefaultPrinter = NULL;
- snprintf(filename, sizeof(filename), "/var/spool/lp/activeicons/%s", p->name);
- unlink(filename);
+ /*
+ * Remove this printer from any classes...
+ */
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.config", p->name);
- unlink(filename);
+ changed = cupsdDeletePrinterFromClasses(p);
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.status", p->name);
- unlink(filename);
+ /*
+ * Deregister from any browse protocols...
+ */
- snprintf(filename, sizeof(filename), "/var/spool/lp/member/%s", p->name);
- unlink(filename);
-#endif /* __sgi */
+ cupsdDeregisterPrinter(p, 1);
/*
- * If p is the default printer, assign a different one...
+ * Remove support files if this is a temporary queue and deregister color
+ * profiles...
*/
- if (p == DefaultPrinter)
+ if (p->temporary)
{
- DefaultPrinter = NULL;
-
- if (UseNetworkDefault)
- {
- /*
- * Find the first network default printer and use it...
- */
-
- cupsd_printer_t *dp; /* New default printer */
+ char filename[1024]; /* Script/PPD filename */
+ /*
+ * Remove any old PPD or script files...
+ */
- for (dp = (cupsd_printer_t *)cupsArrayFirst(Printers);
- dp;
- dp = (cupsd_printer_t *)cupsArrayNext(Printers))
- if (dp != p && (dp->type & CUPS_PRINTER_DEFAULT))
- {
- DefaultPrinter = dp;
- break;
- }
- }
- }
+ snprintf(filename, sizeof(filename), "%s/ppd/%s.ppd", ServerRoot, p->name);
+ unlink(filename);
+ snprintf(filename, sizeof(filename), "%s/ppd/%s.ppd.O", ServerRoot, p->name);
+ unlink(filename);
- /*
- * Remove this printer from any classes...
- */
+ snprintf(filename, sizeof(filename), "%s/%s.png", CacheDir, p->name);
+ unlink(filename);
- if (!(p->type & CUPS_PRINTER_IMPLICIT))
- {
- changed = cupsdDeletePrinterFromClasses(p);
+ snprintf(filename, sizeof(filename), "%s/%s.data", CacheDir, p->name);
+ unlink(filename);
/*
- * Deregister from any browse protocols...
+ * Unregister color profiles...
*/
- cupsdDeregisterPrinter(p, 1);
+ cupsdUnregisterColor(p);
}
/*
cupsdClearString(&p->hostname);
cupsdClearString(&p->name);
cupsdClearString(&p->location);
+ cupsdClearString(&p->geo_location);
cupsdClearString(&p->make_model);
cupsdClearString(&p->info);
cupsdClearString(&p->job_sheets[0]);
cupsdClearString(&p->port_monitor);
cupsdClearString(&p->op_policy);
cupsdClearString(&p->error_policy);
+ cupsdClearString(&p->strings);
cupsdClearString(&p->alert);
cupsdClearString(&p->alert_description);
-#ifdef HAVE_DNSSD
+#if defined(HAVE_DNSSD) || defined(HAVE_AVAHI)
cupsdClearString(&p->pdl);
-#endif /* HAVE_DNSSD */
+ cupsdClearString(&p->reg_name);
+#endif /* HAVE_DNSSD || HAVE_AVAHI */
cupsArrayDelete(p->filetypes);
- if (p->browse_attrs)
- free(p->browse_attrs);
-
cupsFreeOptions(p->num_options, p->options);
free(p);
}
+/*
+ * 'cupsdDeleteTemporaryPrinters()' - Delete unneeded temporary printers.
+ */
+
+void
+cupsdDeleteTemporaryPrinters(int force) /* I - Force deletion instead of auto? */
+{
+ cupsd_printer_t *p; /* Current printer */
+ time_t unused_time; /* Last time for printer state change */
+
+
+ /*
+ * Allow temporary printers to stick around for 60 seconds after the last job
+ * completes.
+ */
+
+ unused_time = time(NULL) - 60;
+
+ for (p = (cupsd_printer_t *)cupsArrayFirst(Printers); p; p = (cupsd_printer_t *)cupsArrayNext(Printers))
+ {
+ if (p->temporary && (force || p->state_time < unused_time))
+ cupsdDeletePrinter(p, 0);
+ }
+}
+
+
/*
* 'cupsdFindDest()' - Find a destination in the list.
*/
* Decode the directive...
*/
- if (!_cups_strcasecmp(line, "<Printer") ||
- !_cups_strcasecmp(line, "<DefaultPrinter"))
+ if (!_cups_strcasecmp(line, "NextPrinterId"))
+ {
+ if (value && (i = atoi(value)) > 0)
+ NextPrinterId = i;
+ else
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Syntax error on line %d of printers.conf.", linenum);
+ }
+ else if (!_cups_strcasecmp(line, "<Printer") || !_cups_strcasecmp(line, "<DefaultPrinter"))
{
/*
* <Printer name> or <DefaultPrinter name>
cupsdLogMessage(CUPSD_LOG_ERROR,
"Syntax error on line %d of printers.conf.", linenum);
}
- else if (!_cups_strcasecmp(line, "</Printer>"))
+ else if (!_cups_strcasecmp(line, "</Printer>") || !_cups_strcasecmp(line, "</DefaultPrinter>"))
{
if (p != NULL)
{
* Close out the current printer...
*/
+ if (!p->printer_id)
+ {
+ p->printer_id = NextPrinterId ++;
+ cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
+ }
+
cupsdSetPrinterAttrs(p);
- if (strncmp(p->device_uri, "file:", 5) &&
- p->state != IPP_PRINTER_STOPPED)
+ if (strncmp(p->device_uri, "file:", 5) && p->state != IPP_PRINTER_STOPPED)
{
/*
* See if the backend exists...
*/
- snprintf(line, sizeof(line), "%s/backend/%s", ServerBin,
- p->device_uri);
+ snprintf(line, sizeof(line), "%s/backend/%s", ServerBin, p->device_uri);
if ((valueptr = strchr(line + strlen(ServerBin), ':')) != NULL)
*valueptr = '\0'; /* Chop everything but URI scheme */
*/
p->state = IPP_PRINTER_STOPPED;
- snprintf(p->state_message, sizeof(p->state_message),
- "Backend %s does not exist!", line);
+ snprintf(p->state_message, sizeof(p->state_message), "Backend %s does not exist!", line);
}
}
cupsdLogMessage(CUPSD_LOG_ERROR,
"Syntax error on line %d of printers.conf.", linenum);
}
+ else if (!_cups_strcasecmp(line, "PrinterId"))
+ {
+ if (value && (i = atoi(value)) > 0)
+ p->printer_id = i;
+ else
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Bad PrinterId on line %d of printers.conf.", linenum);
+ }
else if (!_cups_strcasecmp(line, "UUID"))
{
if (value && !strncmp(value, "urn:uuid:", 9))
if (value)
cupsdSetString(&p->location, value);
}
+ else if (!_cups_strcasecmp(line, "GeoLocation"))
+ {
+ if (value)
+ cupsdSetString(&p->geo_location, value);
+ }
+ else if (!_cups_strcasecmp(line, "Organization"))
+ {
+ if (value)
+ cupsdSetString(&p->organization, value);
+ }
+ else if (!_cups_strcasecmp(line, "OrganizationalUnit"))
+ {
+ if (value)
+ cupsdSetString(&p->organizational_unit, value);
+ }
else if (!_cups_strcasecmp(line, "DeviceURI"))
{
if (value)
if (value)
p->state_time = atoi(value);
}
+ else if (!_cups_strcasecmp(line, "ConfigTime"))
+ {
+ /*
+ * Set the config time...
+ */
+
+ if (value)
+ p->config_time = atoi(value);
+ }
else if (!_cups_strcasecmp(line, "Accepting"))
{
/*
else if (!_cups_strcasecmp(line, "Type"))
{
if (value)
- p->type = atoi(value);
+ p->type = (cups_ptype_t)atoi(value);
else
cupsdLogMessage(CUPSD_LOG_ERROR,
"Syntax error on line %d of printers.conf.", linenum);
else if (!_cups_strcasecmp(line, "ErrorPolicy"))
{
if (value)
- cupsdSetString(&p->error_policy, value);
+ {
+ if (strcmp(value, "retry-current-job") &&
+ strcmp(value, "abort-job") &&
+ strcmp(value, "retry-job") &&
+ strcmp(value, "stop-printer"))
+ cupsdLogMessage(CUPSD_LOG_ALERT, "Invalid ErrorPolicy \"%s\" on line %d or printers.conf.", ErrorPolicy, linenum);
+ else
+ cupsdSetString(&p->error_policy, value);
+ }
else
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Syntax error on line %d of printers.conf.", linenum);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "Syntax error on line %d of printers.conf.", linenum);
}
else if (!_cups_strcasecmp(line, "Attribute") && value)
{
"cupsdRenamePrinter: Removing %s from Printers", p->name);
cupsArrayRemove(Printers, p);
- if (p->type & CUPS_PRINTER_IMPLICIT)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "cupsdRenamePrinter: Removing %s from ImplicitPrinters",
- p->name);
- cupsArrayRemove(ImplicitPrinters, p);
- }
-
/*
* Rename the printer type...
*/
cupsdLogMessage(CUPSD_LOG_DEBUG2,
"cupsdRenamePrinter: Adding %s to Printers", p->name);
cupsArrayAdd(Printers, p);
-
- if (p->type & CUPS_PRINTER_IMPLICIT)
- {
- cupsdLogMessage(CUPSD_LOG_DEBUG2,
- "cupsdRenamePrinter: Adding %s to ImplicitPrinters",
- p->name);
- cupsArrayAdd(ImplicitPrinters, p);
- }
}
cupsFilePrintf(fp, "# Written by cupsd on %s\n", temp);
cupsFilePuts(fp, "# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING\n");
+ cupsFilePrintf(fp, "NextPrinterId %d\n", NextPrinterId);
+
/*
* Write each local printer known to the system...
*/
printer = (cupsd_printer_t *)cupsArrayNext(Printers))
{
/*
- * Skip remote destinations and printer classes...
+ * Skip printer classes and temporary queues...
*/
- if ((printer->type & CUPS_PRINTER_DISCOVERED) ||
- (printer->type & CUPS_PRINTER_CLASS) ||
- (printer->type & CUPS_PRINTER_IMPLICIT))
+ if ((printer->type & CUPS_PRINTER_CLASS) || printer->temporary)
continue;
/*
else
cupsFilePrintf(fp, "<Printer %s>\n", printer->name);
+ if (printer->printer_id)
+ cupsFilePrintf(fp, "PrinterId %d\n", printer->printer_id);
+
cupsFilePrintf(fp, "UUID %s\n", printer->uuid);
if (printer->num_auth_info_required > 0)
if (printer->location)
cupsFilePutConf(fp, "Location", printer->location);
+ if (printer->geo_location)
+ cupsFilePutConf(fp, "GeoLocation", printer->geo_location);
+
if (printer->make_model)
cupsFilePutConf(fp, "MakeModel", printer->make_model);
+ if (printer->organization)
+ cupsFilePutConf(fp, "Organization", printer->organization);
+
+ if (printer->organizational_unit)
+ cupsFilePutConf(fp, "OrganizationalUnit", printer->organizational_unit);
+
cupsFilePutConf(fp, "DeviceURI", printer->device_uri);
if (printer->port_monitor)
{
cupsFilePuts(fp, "State Stopped\n");
- if (printer->state_message)
+ if (printer->state_message[0])
cupsFilePutConf(fp, "StateMessage", printer->state_message);
}
else
cupsFilePuts(fp, "State Idle\n");
cupsFilePrintf(fp, "StateTime %d\n", (int)printer->state_time);
+ cupsFilePrintf(fp, "ConfigTime %d\n", (int)printer->config_time);
for (i = 0; i < printer->num_reasons; i ++)
if (strcmp(printer->reasons[i], "connecting-to-device") &&
if (i)
*ptr++ = ',';
- strlcpy(ptr, marker->values[i].string.text,
- value + sizeof(value) - ptr);
+ strlcpy(ptr, marker->values[i].string.text, (size_t)(value + sizeof(value) - ptr));
ptr += strlen(ptr);
}
if (i)
*ptr++ = ',';
- strlcpy(ptr, marker->values[i].string.text,
- value + sizeof(value) - ptr);
+ strlcpy(ptr, marker->values[i].string.text, (size_t)(value + sizeof(value) - ptr));
ptr += strlen(ptr);
}
if (i)
*ptr++ = ',';
- strlcpy(ptr, marker->values[i].string.text,
- value + sizeof(value) - ptr);
+ strlcpy(ptr, marker->values[i].string.text, (size_t)(value + sizeof(value) - ptr));
ptr += strlen(ptr);
}
cupsFilePrintf(fp, "Attribute marker-change-time %ld\n",
(long)printer->marker_time);
- cupsFilePuts(fp, "</Printer>\n");
-
-#ifdef __sgi
- /*
- * Make IRIX desktop & printer status happy
- */
-
- write_irix_state(printer);
-#endif /* __sgi */
+ if (printer == DefaultPrinter)
+ cupsFilePuts(fp, "</DefaultPrinter>\n");
+ else
+ cupsFilePuts(fp, "</Printer>\n");
}
cupsdCloseCreatedConfFile(fp, filename);
strcmp(p->auth_info_required[0], "none"))
p->type |= CUPS_PRINTER_AUTHENTICATED;
else
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_AUTHENTICATED;
return (1);
}
if (!attr || attr->num_values > 4)
return (0);
- /*
- * Update the printer-type value as needed...
- */
-
- if (attr->num_values > 1 ||
- strcmp(attr->values[0].string.text, "none"))
- p->type |= CUPS_PRINTER_AUTHENTICATED;
- else
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
-
for (i = 0; i < attr->num_values; i ++)
{
if (!strcmp(attr->values[i].string.text, "none"))
cupsdSetPrinterAttr(
cupsd_printer_t *p, /* I - Printer */
const char *name, /* I - Attribute name */
- char *value) /* I - Attribute value string */
+ const char *value) /* I - Attribute value string */
{
ipp_attribute_t *attr; /* Attribute */
int i, /* Looping var */
count; /* Number of values */
- char *ptr; /* Pointer into value */
+ char *temp, /* Temporary copy of value string */
+ *ptr, /* Pointer into value */
+ *start, /* Start of value */
+ quote; /* Quote character */
ipp_tag_t value_tag; /* Value tag for this attribute */
return;
}
+ /*
+ * Copy the value string so we can do what we want with it...
+ */
+
+ if ((temp = strdup(value)) == NULL)
+ {
+ cupsdLogMessage(CUPSD_LOG_ERROR,
+ "Unable to duplicate value for \"%s\" attribute.", name);
+ return;
+ }
+
/*
* Count the number of values...
*/
- for (count = 1, ptr = value;
- (ptr = strchr(ptr, ',')) != NULL;
- ptr ++, count ++);
+ for (count = 1, quote = '\0', ptr = temp;
+ *ptr;
+ ptr ++)
+ {
+ if (*ptr == quote)
+ quote = '\0';
+ else if (quote)
+ continue;
+ else if (*ptr == '\\' && ptr[1])
+ ptr ++;
+ else if (*ptr == '\'' || *ptr == '\"')
+ quote = *ptr;
+ else if (*ptr == ',')
+ count ++;
+ }
/*
* Then add or update the attribute as needed...
if (!attr)
{
+ free(temp);
cupsdLogMessage(CUPSD_LOG_ERROR,
"Unable to allocate memory for printer attribute "
"(%d values)", count);
return;
}
- for (i = 0; i < count; i ++)
+ for (i = 0, start = temp; i < count; i ++)
{
- if ((ptr = strchr(value, ',')) != NULL)
+ if ((ptr = strchr(start, ',')) != NULL)
*ptr++ = '\0';
- attr->values[i].integer = strtol(value, NULL, 10);
+ attr->values[i].integer = strtol(start, NULL, 10);
if (ptr)
- value = ptr;
+ start = ptr;
}
}
else
if (!attr)
{
+ free(temp);
cupsdLogMessage(CUPSD_LOG_ERROR,
"Unable to allocate memory for printer attribute "
"(%d values)", count);
return;
}
+ for (i = 0, quote = '\0', ptr = temp; i < count; i ++)
+ {
+ for (start = ptr; *ptr; ptr ++)
+ {
+ if (*ptr == quote)
+ *ptr = quote = '\0';
+ else if (quote)
+ continue;
+ else if (*ptr == '\\' && ptr[1])
+ _cups_strcpy(ptr, ptr + 1);
+ else if (*ptr == '\'' || *ptr == '\"')
+ {
+ quote = *ptr;
+
+ if (ptr == start)
+ start ++;
+ else
+ _cups_strcpy(ptr, ptr + 1);
+ }
+ else if (*ptr == ',')
+ {
+ *ptr++ = '\0';
+ break;
+ }
+ }
+
+ attr->values[i].string.text = _cupsStrAlloc(start);
+ }
+ }
+
+ free(temp);
+
+ /*
+ * Update the printer-supply and printer-supply-description, as needed...
+ */
+
+ if (!strcmp(name, "marker-names"))
+ {
+ ipp_attribute_t *supply_desc = ippFindAttribute(p->attrs, "printer-supply-description", IPP_TAG_TEXT);
+ /* printer-supply-description attribute */
+
+ if (supply_desc != NULL)
+ ippDeleteAttribute(p->attrs, supply_desc);
+
+ supply_desc = ippCopyAttribute(p->attrs, attr, 0);
+ ippSetName(p->attrs, &supply_desc, "printer-supply-description");
+ ippSetValueTag(p->attrs, &supply_desc, IPP_TAG_TEXT);
+ }
+ else if (!strcmp(name, "marker-colors") || !strcmp(name, "marker-levels") || !strcmp(name, "marker-types"))
+ {
+ char buffer[256], /* printer-supply values */
+ pstype[64], /* printer-supply type value */
+ *psptr; /* Pointer into type */
+ const char *color, /* marker-colors value */
+ *type; /* marker-types value */
+ int level; /* marker-levels value */
+ ipp_attribute_t *colors = ippFindAttribute(p->attrs, "marker-colors", IPP_TAG_NAME);
+ /* marker-colors attribute */
+ ipp_attribute_t *levels = ippFindAttribute(p->attrs, "marker-levels", IPP_TAG_INTEGER);
+ /* marker-levels attribute */
+ ipp_attribute_t *types = ippFindAttribute(p->attrs, "marker-types", IPP_TAG_KEYWORD);
+ /* marker-types attribute */
+ ipp_attribute_t *supply = ippFindAttribute(p->attrs, "printer-supply", IPP_TAG_STRING);
+ /* printer-supply attribute */
+
+ if (supply != NULL)
+ {
+ ippDeleteAttribute(p->attrs, supply);
+ supply = NULL;
+ }
+
+ if (!colors || !levels || !types)
+ return;
+
+ count = ippGetCount(colors);
+ if (count != ippGetCount(levels) || count != ippGetCount(types))
+ return;
+
for (i = 0; i < count; i ++)
{
- if ((ptr = strchr(value, ',')) != NULL)
- *ptr++ = '\0';
+ color = ippGetString(colors, i, NULL);
+ level = ippGetInteger(levels, i);
+ type = ippGetString(types, i, NULL);
- attr->values[i].string.text = _cupsStrAlloc(value);
+ for (psptr = pstype; *type && psptr < (pstype + sizeof(pstype) - 1); type ++)
+ if (*type == '-')
+ {
+ type ++;
+ *psptr++ = (char)toupper(*type & 255);
+ }
+ else
+ *psptr++ = *type;
+ *psptr = '\0';
- if (ptr)
- value = ptr;
+ snprintf(buffer, sizeof(buffer), "index=%d;class=%s;type=%s;unit=percent;maxcapacity=100;level=%d;colorantname=%s;", i + 1, strncmp(pstype, "waste", 5) ? "supplyThatIsConsumed" : "receptacleThatIsFilled", pstype, level, color);
+
+ if (!i)
+ supply = ippAddOctetString(p->attrs, IPP_TAG_PRINTER, "printer-supply", buffer, (int)strlen(buffer));
+ else
+ ippSetOctetString(p->attrs, &supply, i, buffer, (int)strlen(buffer));
}
}
}
void
cupsdSetPrinterAttrs(cupsd_printer_t *p)/* I - Printer to setup */
{
- int i, /* Looping var */
- length; /* Length of browse attributes */
+ int i; /* Looping var */
char resource[HTTP_MAX_URI]; /* Resource portion of URI */
- int num_air; /* Number of auth-info-required values */
- const char * const *air; /* auth-info-required values */
cupsd_location_t *auth; /* Pointer to authentication element */
const char *auth_supported; /* Authentication supported */
ipp_t *oldattrs; /* Old printer attributes */
ipp_attribute_t *attr; /* Attribute data */
- cups_option_t *option; /* Current printer option */
char *name, /* Current user/group name */
*filter; /* Current filter */
- static const char * const air_none[] =
- { /* No authentication */
- "none"
- };
- static const char * const air_userpass[] =
- { /* Basic/Digest authentication */
- "username",
- "password"
- };
- DEBUG_printf(("cupsdSetPrinterAttrs: entering name = %s, type = %x\n", p->name,
- p->type));
-
/*
* Make sure that we have the common attributes defined...
*/
if (!CommonData)
cupsdCreateCommonData();
+ _cupsRWLockWrite(&p->lock);
+
/*
* Clear out old filters, if any...
*/
*/
auth_supported = "requesting-user-name";
- num_air = 1;
- air = air_none;
-
- if (p->num_auth_info_required > 0 && strcmp(p->auth_info_required[0], "none"))
- {
- num_air = p->num_auth_info_required;
- air = p->auth_info_required;
- }
- else if ((p->type & CUPS_PRINTER_AUTHENTICATED) &&
- (p->type & CUPS_PRINTER_DISCOVERED))
- {
- num_air = 2;
- air = air_userpass;
- }
if (p->type & CUPS_PRINTER_CLASS)
snprintf(resource, sizeof(resource), "/classes/%s", p->name);
if ((auth_type = auth->type) == CUPSD_AUTH_DEFAULT)
- auth_type = DefaultAuthType;
+ auth_type = cupsdDefaultAuthType();
- if (auth_type == CUPSD_AUTH_BASIC || auth_type == CUPSD_AUTH_BASICDIGEST)
+ if (auth_type == CUPSD_AUTH_BASIC)
auth_supported = "basic";
- else if (auth_type == CUPSD_AUTH_DIGEST)
- auth_supported = "digest";
#ifdef HAVE_GSSAPI
else if (auth_type == CUPSD_AUTH_NEGOTIATE)
auth_supported = "negotiate";
#endif /* HAVE_GSSAPI */
- if (!(p->type & CUPS_PRINTER_DISCOVERED))
- {
- if (auth_type != CUPSD_AUTH_NONE)
- p->type |= CUPS_PRINTER_AUTHENTICATED;
- else
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
- }
+ if (auth_type != CUPSD_AUTH_NONE)
+ p->type |= CUPS_PRINTER_AUTHENTICATED;
+ else
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_AUTHENTICATED;
}
- else if (!(p->type & CUPS_PRINTER_DISCOVERED))
- p->type &= ~CUPS_PRINTER_AUTHENTICATED;
+ else
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_AUTHENTICATED;
/*
* Create the required IPP attributes for a printer...
"uri-authentication-supported", NULL, auth_supported);
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"uri-security-supported", NULL, "none");
+ if (p->printer_id)
+ ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER, "printer-id", p->printer_id);
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_NAME, "printer-name", NULL,
p->name);
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-location",
NULL, p->location ? p->location : "");
+ if (p->geo_location)
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-geo-location", NULL, p->geo_location);
+ else
+ ippAddOutOfBand(p->attrs, IPP_TAG_PRINTER, IPP_TAG_UNKNOWN, "printer-geo-location");
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-info",
NULL, p->info ? p->info : "");
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-uuid", NULL,
- p->uuid);
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-organization", NULL, p->organization ? p->organization : "");
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-organizational-unit", NULL, p->organizational_unit ? p->organizational_unit : "");
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-uuid", NULL, p->uuid);
if (cupsArrayCount(p->users) > 0)
{
for (i = 0, name = (char *)cupsArrayFirst(p->users);
name;
i ++, name = (char *)cupsArrayNext(p->users))
- attr->values[i].string.text = _cupsStrRetain(name);
+ attr->values[i].string.text = _cupsStrAlloc(name);
}
ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"job-k-limit", p->k_limit);
ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"job-page-limit", p->page_limit);
- ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "auth-info-required", num_air, NULL, air);
+ if (p->num_auth_info_required > 0 && strcmp(p->auth_info_required[0], "none"))
+ ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
+ "auth-info-required", p->num_auth_info_required, NULL,
+ p->auth_info_required);
- if (cupsArrayCount(Banners) > 0 && !(p->type & CUPS_PRINTER_DISCOVERED))
+ if (cupsArrayCount(Banners) > 0)
{
/*
* Setup the job-sheets-default attribute...
p->raw = 0;
p->remote = 0;
- if (p->type & CUPS_PRINTER_DISCOVERED)
+ /*
+ * Assign additional attributes depending on whether this is a printer
+ * or class...
+ */
+
+ if (p->type & CUPS_PRINTER_CLASS)
{
+ p->raw = 1;
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_OPTIONS;
+
/*
- * Tell the client this is a remote printer of some type...
+ * Add class-specific attributes...
*/
- if (strchr(p->uri, '?'))
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT,
+ "printer-make-and-model", NULL, "Local Printer Class");
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "device-uri", NULL,
+ "file:///dev/null");
+
+ if (p->num_printers > 0)
{
/*
- * Strip trailing "?options" from URI...
+ * Add a list of member names; URIs are added in copy_printer_attrs...
*/
- char *ptr; /* Pointer into URI */
+ attr = ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_NAME,
+ "member-names", p->num_printers, NULL, NULL);
+ p->type |= CUPS_PRINTER_OPTIONS;
- strlcpy(resource, p->uri, sizeof(resource));
- if ((ptr = strchr(resource, '?')) != NULL)
- *ptr = '\0';
+ for (i = 0; i < p->num_printers; i ++)
+ {
+ if (attr != NULL)
+ attr->values[i].string.text = _cupsStrAlloc(p->printers[i]->name);
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI,
- "printer-uri-supported", NULL, resource);
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_OPTIONS | p->printers[i]->type;
+ }
}
- else
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI,
- "printer-uri-supported", NULL, p->uri);
-
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "printer-more-info",
- NULL, p->uri);
-
- if (p->make_model)
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT,
- "printer-make-and-model", NULL, p->make_model);
-
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "device-uri", NULL,
- p->uri);
-
- p->raw = 1;
- p->remote = 1;
}
else
{
/*
- * Assign additional attributes depending on whether this is a printer
- * or class...
+ * Add printer-specific attributes...
*/
- if (p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT))
- {
- p->raw = 1;
- p->type &= ~CUPS_PRINTER_OPTIONS;
-
- /*
- * Add class-specific attributes...
- */
-
- if ((p->type & CUPS_PRINTER_IMPLICIT) && p->num_printers > 0 &&
- p->printers[0]->make_model)
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT,
- "printer-make-and-model", NULL, p->printers[0]->make_model);
- else
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT,
- "printer-make-and-model", NULL, "Local Printer Class");
+ ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "device-uri", NULL,
+ p->sanitized_device_uri);
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "device-uri", NULL,
- "file:///dev/null");
+ /*
+ * Assign additional attributes from the PPD file (if any)...
+ */
- if (p->num_printers > 0)
- {
- /*
- * Add a list of member names; URIs are added in copy_printer_attrs...
- */
+ load_ppd(p);
- attr = ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_NAME,
- "member-names", p->num_printers, NULL, NULL);
- p->type |= CUPS_PRINTER_OPTIONS;
+ /*
+ * Add filters for printer...
+ */
- for (i = 0; i < p->num_printers; i ++)
- {
- if (attr != NULL)
- attr->values[i].string.text = _cupsStrRetain(p->printers[i]->name);
+ cupsdSetPrinterReasons(p, "-cups-missing-filter-warning,"
+ "cups-insecure-filter-warning");
- p->type &= ~CUPS_PRINTER_OPTIONS | p->printers[i]->type;
- }
- }
+ if (p->pc && p->pc->filters)
+ {
+ for (filter = (char *)cupsArrayFirst(p->pc->filters);
+ filter;
+ filter = (char *)cupsArrayNext(p->pc->filters))
+ add_printer_filter(p, p->filetype, filter);
}
- else
+ else if (!(p->type & CUPS_PRINTER_REMOTE))
{
/*
- * Add printer-specific attributes...
- */
-
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI, "device-uri", NULL,
- p->sanitized_device_uri);
-
- /*
- * Assign additional attributes from the PPD file (if any)...
+ * Add a filter from application/vnd.cups-raw to printer/name to
+ * handle "raw" printing by users.
*/
- load_ppd(p);
+ add_printer_filter(p, p->filetype, "application/vnd.cups-raw 0 -");
/*
- * Add filters for printer...
+ * Add a PostScript filter, since this is still possibly PS printer.
*/
- cupsdSetPrinterReasons(p, "-cups-missing-filter-warning,"
- "cups-insecure-filter-warning");
-
- if (p->pc && p->pc->filters)
- {
- for (filter = (char *)cupsArrayFirst(p->pc->filters);
- filter;
- filter = (char *)cupsArrayNext(p->pc->filters))
- add_printer_filter(p, p->filetype, filter);
- }
- else if (!(p->type & CUPS_PRINTER_REMOTE))
- {
- char interface[1024]; /* Interface script */
-
-
- snprintf(interface, sizeof(interface), "%s/interfaces/%s", ServerRoot,
- p->name);
- if (!access(interface, X_OK))
- {
- /*
- * Yes, we have a System V style interface script; use it!
- */
-
- snprintf(interface, sizeof(interface), "*/* 0 %s/interfaces/%s",
- ServerRoot, p->name);
- add_printer_filter(p, p->filetype, interface);
- }
- else
- {
- /*
- * Add a filter from application/vnd.cups-raw to printer/name to
- * handle "raw" printing by users.
- */
-
- add_printer_filter(p, p->filetype, "application/vnd.cups-raw 0 -");
-
- /*
- * Add a PostScript filter, since this is still possibly PS printer.
- */
-
- add_printer_filter(p, p->filetype,
- "application/vnd.cups-postscript 0 -");
- }
- }
+ add_printer_filter(p, p->filetype,
+ "application/vnd.cups-postscript 0 -");
+ }
- if (p->pc && p->pc->prefilters)
- {
- if (!p->prefiltertype)
- p->prefiltertype = mimeAddType(MimeDatabase, "prefilter", p->name);
+ if (p->pc && p->pc->prefilters)
+ {
+ if (!p->prefiltertype)
+ p->prefiltertype = mimeAddType(MimeDatabase, "prefilter", p->name);
- for (filter = (char *)cupsArrayFirst(p->pc->prefilters);
- filter;
- filter = (char *)cupsArrayNext(p->pc->prefilters))
- add_printer_filter(p, p->prefiltertype, filter);
- }
+ for (filter = (char *)cupsArrayFirst(p->pc->prefilters);
+ filter;
+ filter = (char *)cupsArrayNext(p->pc->prefilters))
+ add_printer_filter(p, p->prefiltertype, filter);
}
}
{
for (i = 0; i < oldattr->num_values; i ++)
attr->values[i].string.text =
- _cupsStrRetain(oldattr->values[i].string.text);
+ _cupsStrAlloc(oldattr->values[i].string.text);
}
}
NULL)) != NULL)
{
for (i = 0; i < oldattr->num_values; i ++)
- attr->values[i].string.text =
- _cupsStrRetain(oldattr->values[i].string.text);
- }
- }
-
- if ((oldattr = ippFindAttribute(oldattrs, "marker-types",
- IPP_TAG_KEYWORD)) != NULL)
- {
- if ((attr = ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "marker-types", oldattr->num_values, NULL,
- NULL)) != NULL)
- {
- for (i = 0; i < oldattr->num_values; i ++)
- attr->values[i].string.text =
- _cupsStrRetain(oldattr->values[i].string.text);
- }
- }
-
- ippDelete(oldattrs);
- }
-
- /*
- * Force sharing off for remote queues...
- */
-
- if (p->type & (CUPS_PRINTER_REMOTE | CUPS_PRINTER_IMPLICIT))
- p->shared = 0;
- else
- {
- /*
- * Copy the printer options into a browse attributes string we can re-use.
- */
-
- const char *valptr; /* Pointer into value */
- char *attrptr; /* Pointer into attribute string */
-
-
- /*
- * Free the old browse attributes as needed...
- */
-
- if (p->browse_attrs)
- free(p->browse_attrs);
-
- /*
- * Compute the length of all attributes + job-sheets, lease-duration,
- * and BrowseLocalOptions.
- */
-
- for (length = 1, i = p->num_options, option = p->options;
- i > 0;
- i --, option ++)
- {
- length += strlen(option->name) + 2;
-
- if (option->value)
- {
- for (valptr = option->value; *valptr; valptr ++)
- if (strchr(" \"\'\\", *valptr))
- length += 2;
- else
- length ++;
- }
- }
-
- length += 13 + strlen(p->job_sheets[0]) + strlen(p->job_sheets[1]);
- length += 32;
- if (BrowseLocalOptions)
- length += 12 + strlen(BrowseLocalOptions);
-
- /*
- * Allocate the new string...
- */
-
- if ((p->browse_attrs = calloc(1, length)) == NULL)
- cupsdLogMessage(CUPSD_LOG_ERROR,
- "Unable to allocate %d bytes for browse data!",
- length);
- else
- {
- /*
- * Got the allocated string, now copy the options and attributes over...
- */
-
- sprintf(p->browse_attrs, "job-sheets=%s,%s lease-duration=%d",
- p->job_sheets[0], p->job_sheets[1], BrowseTimeout);
- attrptr = p->browse_attrs + strlen(p->browse_attrs);
-
- if (BrowseLocalOptions)
- {
- sprintf(attrptr, " ipp-options=%s", BrowseLocalOptions);
- attrptr += strlen(attrptr);
+ attr->values[i].string.text =
+ _cupsStrAlloc(oldattr->values[i].string.text);
}
+ }
- for (i = p->num_options, option = p->options;
- i > 0;
- i --, option ++)
+ if ((oldattr = ippFindAttribute(oldattrs, "marker-types",
+ IPP_TAG_KEYWORD)) != NULL)
+ {
+ if ((attr = ippAddStrings(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
+ "marker-types", oldattr->num_values, NULL,
+ NULL)) != NULL)
{
- *attrptr++ = ' ';
- strcpy(attrptr, option->name);
- attrptr += strlen(attrptr);
-
- if (option->value)
- {
- *attrptr++ = '=';
-
- for (valptr = option->value; *valptr; valptr ++)
- {
- if (strchr(" \"\'\\", *valptr))
- *attrptr++ = '\\';
-
- *attrptr++ = *valptr;
- }
- }
+ for (i = 0; i < oldattr->num_values; i ++)
+ attr->values[i].string.text =
+ _cupsStrAlloc(oldattr->values[i].string.text);
}
}
+
+ ippDelete(oldattrs);
}
+ /*
+ * Force sharing off for remote queues...
+ */
+
+ if (p->type & CUPS_PRINTER_REMOTE)
+ p->shared = 0;
+
/*
* Populate the document-format-supported attribute...
*/
add_printer_formats(p);
- DEBUG_printf(("cupsdSetPrinterAttrs: leaving name = %s, type = %x\n", p->name,
- p->type));
-
/*
* Add name-default attributes...
*/
add_printer_defaults(p);
-#ifdef __sgi
- /*
- * Write the IRIX printer config and status files...
- */
-
- write_irix_config(p);
- write_irix_state(p);
-#endif /* __sgi */
+ _cupsRWUnlock(&p->lock);
/*
* Let the browse protocols reflect the change
_cupsStrFree(p->reasons[i]);
if (i < p->num_reasons)
- memmove(p->reasons + i, p->reasons + i + 1,
- (p->num_reasons - i) * sizeof(char *));
+ memmove(p->reasons + i, p->reasons + i + 1, (size_t)(p->num_reasons - i) * sizeof(char *));
if (!strcmp(reason, "paused") && p->state == IPP_PRINTER_STOPPED)
cupsdSetPrinterState(p, IPP_PRINTER_IDLE, 1);
+ if (!strcmp(reason, "cups-waiting-for-job-completed") && p->job)
+ p->job->completed = 0;
+
if (strcmp(reason, "connecting-to-device"))
dirty_printer(p);
+
break;
}
}
if (!strcmp(reason, "paused") && p->state != IPP_PRINTER_STOPPED)
cupsdSetPrinterState(p, IPP_PRINTER_STOPPED, 1);
+ if (!strcmp(reason, "cups-waiting-for-job-completed") && p->job)
+ p->job->completed = 1;
+
if (strcmp(reason, "connecting-to-device"))
dirty_printer(p);
}
ipp_pstate_t s, /* I - New state */
int update) /* I - Update printers.conf? */
{
+ cupsd_job_t *job; /* Current job */
ipp_pstate_t old_state; /* Old printer state */
static const char * const printer_states[] =
{ /* State strings */
};
- /*
- * Can't set status of remote printers...
- */
-
- if (p->type & CUPS_PRINTER_DISCOVERED)
- return;
-
/*
* Set the new state...
*/
* Let the browse code know this needs to be updated...
*/
- BrowseNext = p;
- p->state_time = time(NULL);
- p->browse_time = 0;
-
-#ifdef __sgi
- write_irix_state(p);
-#endif /* __sgi */
+ p->state_time = time(NULL);
}
/*
else
cupsdSetPrinterReasons(p, "-paused");
+ if (old_state != s)
+ {
+ for (job = (cupsd_job_t *)cupsArrayFirst(ActiveJobs);
+ job;
+ job = (cupsd_job_t *)cupsArrayNext(ActiveJobs))
+ if (job->reasons && job->state_value == IPP_JOB_PENDING &&
+ !_cups_strcasecmp(job->dest, p->name))
+ ippSetString(job->attrs, &job->reasons, 0,
+ s == IPP_PRINTER_STOPPED ? "printer-stopped" : "none");
+ }
+
/*
* Clear the message for the queue when going to processing...
*/
p;
p = (cupsd_printer_t *)cupsArrayNext(Printers))
{
- /*
- * Remove remote printers if we are no longer browsing...
- */
-
- if (!Browsing &&
- (p->type & (CUPS_PRINTER_IMPLICIT | CUPS_PRINTER_DISCOVERED)))
- {
- if (p->type & CUPS_PRINTER_IMPLICIT)
- cupsArrayRemove(ImplicitPrinters, p);
-
- cupsArraySave(Printers);
- cupsdDeletePrinter(p, 0);
- cupsArrayRestore(Printers);
- continue;
- }
-
/*
* Update the operation policy pointer...
*/
p->op_policy_ptr = DefaultPolicyPtr;
/*
- * Update printer attributes as needed...
+ * Update printer attributes...
*/
- if (!(p->type & CUPS_PRINTER_DISCOVERED))
- cupsdSetPrinterAttrs(p);
+ cupsdSetPrinterAttrs(p);
}
}
int port; /* Port portion of URI */
- DEBUG_printf(("cupsdValidateDest(uri=\"%s\", dtype=%p, printer=%p)\n", uri,
- dtype, printer));
-
/*
* Initialize return values...
*/
*printer = p;
if (dtype)
- *dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT |
- CUPS_PRINTER_REMOTE | CUPS_PRINTER_DISCOVERED);
+ *dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE);
return (p->name);
}
}
}
- DEBUG_printf(("localized hostname is \"%s\"...\n", localname));
-
/*
* Find a matching printer or class...
*/
*printer = p;
if (dtype)
- *dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_IMPLICIT |
- CUPS_PRINTER_REMOTE | CUPS_PRINTER_DISCOVERED);
+ *dtype = p->type & (CUPS_PRINTER_CLASS | CUPS_PRINTER_REMOTE);
return (p->name);
}
cupsd_printer_t *p; /* Current printer */
-#ifdef __sgi
- /*
- * Update the IRIX printer state for the default printer; if
- * no printers remain, then the default printer file will be
- * removed...
- */
-
- write_irix_state(DefaultPrinter);
-#endif /* __sgi */
-
/*
* See if we have a printcap file; if not, don't bother writing it.
*/
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("copies-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("document-format-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("finishings-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-account-id-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-accounting-user-id-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-cancel-after-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-hold-until-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-priority-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("job-sheets-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("media-col-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("notify-lease-duration-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("notify-events-default"));
cupsArrayAdd(CommonDefaults, _cupsStrAlloc("number-up-default"));
- cupsArrayAdd(CommonDefaults,
- _cupsStrAlloc("orientation-requested-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("orientation-requested-default"));
+ cupsArrayAdd(CommonDefaults, _cupsStrAlloc("print-quality-default"));
}
/*
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_MIMETYPE,
"document-format-default", NULL, "application/octet-stream");
+ if (!cupsGetOption("job-cancel-after", p->num_options, p->options))
+ ippAddInteger(p->attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
+ "job-cancel-after-default", MaxJobTime);
+
if (!cupsGetOption("job-hold-until", p->num_options, p->options))
ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"job-hold-until-default", NULL, "no-hold");
{
char *ptr; /* Pointer into maxsize(nnnn) program */
- maxsize = strtoll(program + 8, &ptr, 10);
+ maxsize = (size_t)strtoll(program + 8, &ptr, 10);
if (*ptr != ')')
{
"add_printer_filter: %s: adding filter %s/%s %s/%s "
"0 -", p->name, desttype->super, desttype->type,
filtertype->super, filtertype->type);
- mimeAddFilter(MimeDatabase, desttype, filtertype, cost, "-");
+ mimeAddFilter(MimeDatabase, desttype, filtertype, 0, "-");
}
}
else
attr->values[i].string.text = _cupsStrAlloc(mimetype);
}
-#ifdef HAVE_DNSSD
+#if defined(HAVE_DNSSD) || defined(HAVE_AVAHI)
{
char pdl[1024]; /* Buffer to build pdl list */
mime_filter_t *filter; /* MIME filter looping var */
filter;
filter = (mime_filter_t *)cupsArrayNext(MimeDatabase->filters))
{
- if (filter->dst == p->filetype && filter->filter &&
- strstr(filter->filter, "PrintJobMgr"))
+ if (filter->dst == p->filetype && strstr(filter->filter, "PrintJobMgr"))
break;
}
cupsdSetString(&p->pdl, pdl);
}
-#endif /* HAVE_DNSSD */
+#endif /* HAVE_DNSSD || HAVE_AVAHI */
}
static void
dirty_printer(cupsd_printer_t *p) /* I - Printer */
{
- if (p->type & CUPS_PRINTER_DISCOVERED)
- cupsdMarkDirty(CUPSD_DIRTY_REMOTE);
- else if (p->type & CUPS_PRINTER_CLASS)
+ if (p->type & CUPS_PRINTER_CLASS)
cupsdMarkDirty(CUPSD_DIRTY_CLASSES);
else
cupsdMarkDirty(CUPSD_DIRTY_PRINTERS);
ppd_file_t *ppd; /* PPD file */
char ppd_name[1024]; /* PPD filename */
struct stat ppd_info; /* PPD file info */
+ char strings_name[1024]; /* Strings filename */
int num_media; /* Number of media options */
ppd_size_t *size; /* Current PPD size */
ppd_option_t *duplex, /* Duplex option */
int xdpi, /* Horizontal resolution */
ydpi; /* Vertical resolution */
const char *resptr; /* Pointer into resolution keyword */
- _pwg_size_t *pwgsize; /* Current PWG size */
- _pwg_map_t *pwgsource, /* Current PWG source */
+ pwg_size_t *pwgsize; /* Current PWG size */
+ pwg_map_t *pwgsource, /* Current PWG source */
*pwgtype; /* Current PWG type */
ipp_attribute_t *attr; /* Attribute data */
- ipp_value_t *val; /* Attribute value */
+ _ipp_value_t *val; /* Attribute value */
int num_finishings, /* Number of finishings */
- finishings[5]; /* finishings-supported values */
+ finishings[100]; /* finishings-supported values */
int num_qualities, /* Number of print-quality values */
qualities[3]; /* print-quality values */
int num_margins, /* Number of media-*-margin-supported values */
margins[16]; /* media-*-margin-supported values */
- const char *filter; /* Current filter */
+ const char *filter, /* Current filter */
+ *mandatory; /* Current mandatory attribute */
+ static const char * const pwg_raster_document_types[] =
+ {
+ "black_1",
+ "sgray_8",
+ "srgb_8"
+ };
static const char * const sides[3] = /* sides-supported values */
{
"one-sided",
if (stat(ppd_name, &ppd_info))
ppd_info.st_mtime = 1;
+ snprintf(strings_name, sizeof(strings_name), "%s/%s.strings", CacheDir, p->name);
+
ippDelete(p->ppd_attrs);
p->ppd_attrs = NULL;
cupsdLogMessage(CUPSD_LOG_DEBUG, "load_ppd: Loading %s...", ppd_name);
- p->type &= ~CUPS_PRINTER_OPTIONS;
+ cupsdClearString(&(p->make_model));
+
+ p->type &= (cups_ptype_t)~CUPS_PRINTER_OPTIONS;
p->type |= CUPS_PRINTER_BW;
finishings[0] = IPP_FINISHINGS_NONE;
p->ppd_attrs = ippNew();
- if ((ppd = ppdOpenFile(ppd_name)) != NULL)
+ if ((ppd = _ppdOpenFile(ppd_name, _PPD_LOCALIZATION_NONE)) != NULL)
{
/*
* Add make/model and other various attributes...
p->pc = _ppdCacheCreateWithPPD(ppd);
+ if (!p->pc)
+ cupsdLogMessage(CUPSD_LOG_WARN, "Unable to create cache of \"%s\": %s",
+ ppd_name, cupsLastErrorString());
+
ppdMarkDefaults(ppd);
if (ppd->color_device)
if (ppd_attr->value && !_cups_strcasecmp(ppd_attr->value, "true"))
p->type |= CUPS_PRINTER_FAX;
- ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER, "color-supported",
- ppd->color_device);
+ ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER, "color-supported", (char)ppd->color_device);
+
+ if (p->pc && p->pc->charge_info_uri)
+ ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_URI,
+ "printer-charge-info-uri", NULL, p->pc->charge_info_uri);
+
+ if (p->pc && p->pc->account_id)
+ ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER, "job-account-id-supported",
+ 1);
+
+ if (p->pc && p->pc->accounting_user_id)
+ ippAddBoolean(p->ppd_attrs, IPP_TAG_PRINTER,
+ "job-accounting-user-id-supported", 1);
+
+ if (p->pc && p->pc->password)
+ {
+ ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
+ "job-password-encryption-supported", NULL, "none");
+ ippAddInteger(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
+ "job-password-supported", (int)strlen(p->pc->password));
+ }
+
if (ppd->throughput)
{
ippAddInteger(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
"pages-per-minute-color", 1);
}
+ if ((ppd_attr = ppdFindAttr(ppd, "1284DeviceId", NULL)) != NULL)
+ ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT, "printer-device-id", NULL, ppd_attr->value);
+
num_qualities = 0;
if ((output_mode = ppdFindOption(ppd, "OutputMode")) != NULL)
ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT,
"printer-make-and-model", NULL, p->make_model);
+ if (p->pc && p->pc->strings)
+ _cupsMessageSave(strings_name, _CUPS_MESSAGE_STRINGS, p->pc->strings);
+
+ if (!access(strings_name, R_OK))
+ cupsdSetString(&p->strings, strings_name);
+ else
+ cupsdClearString(&p->strings);
+
/*
* Add media options from the PPD file...
*/
if (ppd->num_sizes == 0 || !p->pc)
{
- if (!ppdFindAttr(ppd, "APScannerOnly", NULL))
+ if (!ppdFindAttr(ppd, "APScannerOnly", NULL) && !ppdFindAttr(ppd, "cups3D", NULL))
cupsdLogMessage(CUPSD_LOG_CRIT,
"The PPD file for printer %s contains no media "
- "options and is therefore invalid!", p->name);
+ "options and is therefore invalid.", p->name);
ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"media-default", NULL, "unknown");
input_slot = ppdFindMarkedChoice(ppd, "InputSlot");
media_type = ppdFindMarkedChoice(ppd, "MediaType");
col = new_media_col(pwgsize,
- input_slot ?
- _ppdCacheGetSource(p->pc,
- input_slot->choice) :
- NULL,
- media_type ?
- _ppdCacheGetType(p->pc,
- media_type->choice) :
- NULL);
-
- ippAddCollection(p->ppd_attrs, IPP_TAG_PRINTER, "media-col-default",
- col);
+ input_slot ? _ppdCacheGetSource(p->pc, input_slot->choice) : NULL,
+ media_type ? _ppdCacheGetType(p->pc, media_type->choice) : NULL);
+
+ ippAddCollection(p->ppd_attrs, IPP_TAG_PRINTER, "media-col-default", col);
ippDelete(col);
}
for (i = p->pc->num_sizes, pwgsize = p->pc->sizes;
i > 0;
i --, pwgsize ++, val ++)
- val->string.text = _cupsStrRetain(pwgsize->map.pwg);
+ val->string.text = _cupsStrAlloc(pwgsize->map.pwg);
if (p->pc->custom_min_keyword)
{
- val->string.text = _cupsStrRetain(p->pc->custom_min_keyword);
+ val->string.text = _cupsStrAlloc(p->pc->custom_min_keyword);
val ++;
- val->string.text = _cupsStrRetain(p->pc->custom_max_keyword);
+ val->string.text = _cupsStrAlloc(p->pc->custom_max_keyword);
+ }
+ }
+
+ /*
+ * media-size-supported
+ */
+
+ num_media = p->pc->num_sizes;
+ if (p->pc->custom_min_keyword)
+ num_media ++;
+
+ if ((attr = ippAddCollections(p->ppd_attrs, IPP_TAG_PRINTER,
+ "media-size-supported", num_media,
+ NULL)) != NULL)
+ {
+ val = attr->values;
+
+ for (i = p->pc->num_sizes, pwgsize = p->pc->sizes;
+ i > 0;
+ i --, pwgsize ++, val ++)
+ {
+ val->collection = ippNew();
+ ippAddInteger(val->collection, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
+ "x-dimension", pwgsize->width);
+ ippAddInteger(val->collection, IPP_TAG_PRINTER, IPP_TAG_INTEGER,
+ "y-dimension", pwgsize->length);
+ }
+
+ if (p->pc->custom_min_keyword)
+ {
+ val->collection = ippNew();
+ ippAddRange(val->collection, IPP_TAG_PRINTER, "x-dimension",
+ p->pc->custom_min_width, p->pc->custom_max_width);
+ ippAddRange(val->collection, IPP_TAG_PRINTER, "y-dimension",
+ p->pc->custom_min_length, p->pc->custom_max_length);
}
}
val = attr->values;
i > 0;
i --, pwgsource ++, val ++)
- val->string.text = _cupsStrRetain(pwgsource->pwg);
+ val->string.text = _cupsStrAlloc(pwgsource->pwg);
}
/*
val = attr->values;
i > 0;
i --, pwgtype ++, val ++)
- val->string.text = _cupsStrRetain(pwgtype->pwg);
+ val->string.text = _cupsStrAlloc(pwgtype->pwg);
}
/*
}
/*
- * output-mode and print-color-mode...
+ * print-color-mode...
*/
if (ppd->color_device)
{
- static const char * const output_modes[] =
+ static const char * const color_modes[] =
{
"monochrome",
"color"
};
ippAddStrings(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "output-mode-supported", 2, NULL, output_modes);
- ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "output-mode-default", NULL, "color");
-
- ippAddStrings(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "print-color-mode-supported", 2, NULL, output_modes);
+ "print-color-mode-supported", 2, NULL, color_modes);
ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"print-color-mode-default", NULL, "color");
+ ippAddStrings(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD, "pwg-raster-document-type-supported", 3, NULL, pwg_raster_document_types);
}
else
{
- ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "output-mode-supported", NULL, "monochrome");
- ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
- "output-mode-default", NULL, "monochrome");
-
ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"print-color-mode-supported", NULL, "monochrome");
ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"print-color-mode-default", NULL, "monochrome");
+ ippAddStrings(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD, "pwg-raster-document-type-supported", 2, NULL, pwg_raster_document_types);
+ }
+
+ /*
+ * Mandatory job attributes, if any...
+ */
+
+ if (p->pc && cupsArrayCount(p->pc->mandatory) > 0)
+ {
+ int count = cupsArrayCount(p->pc->mandatory);
+ /* Number of mandatory attributes */
+
+ attr = ippAddStrings(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
+ "printer-mandatory-job-attributes", count, NULL,
+ NULL);
+
+ for (val = attr->values,
+ mandatory = (char *)cupsArrayFirst(p->pc->mandatory);
+ mandatory;
+ val ++, mandatory = (char *)cupsArrayNext(p->pc->mandatory))
+ val->string.text = _cupsStrAlloc(mandatory);
}
/*
* Report all supported resolutions...
*/
- attr = ippAddResolutions(p->ppd_attrs, IPP_TAG_PRINTER,
- "printer-resolution-supported",
- resolution->num_choices, IPP_RES_PER_INCH,
- NULL, NULL);
+ attr = ippAddResolutions(p->ppd_attrs, IPP_TAG_PRINTER, "printer-resolution-supported", resolution->num_choices, IPP_RES_PER_INCH, NULL, NULL);
for (i = 0, choice = resolution->choices;
i < resolution->num_choices;
attr->values[i].resolution.units = IPP_RES_PER_INCH;
if (choice->marked)
- ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER,
- "printer-resolution-default", IPP_RES_PER_INCH,
- xdpi, ydpi);
+ ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER, "printer-resolution-default", IPP_RES_PER_INCH, xdpi, ydpi);
+
+ if (i == 0)
+ ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER, "pwg-raster-document-resolution-supported", IPP_RES_PER_INCH, xdpi, ydpi);
}
}
else if ((ppd_attr = ppdFindAttr(ppd, "DefaultResolution", NULL)) != NULL &&
ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER,
"printer-resolution-supported", IPP_RES_PER_INCH,
xdpi, ydpi);
+ ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER, "pwg-raster-document-resolution-supported", IPP_RES_PER_INCH, xdpi, ydpi);
}
else
{
ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER,
"printer-resolution-supported", IPP_RES_PER_INCH,
300, 300);
+ ippAddResolution(p->ppd_attrs, IPP_TAG_PRINTER, "pwg-raster-document-resolution-supported", IPP_RES_PER_INCH, 300, 300);
}
/*
{
p->type |= CUPS_PRINTER_DUPLEX;
+ ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD, "pwg-raster-document-sheet-back", NULL, "normal");
+
ippAddStrings(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_KEYWORD,
"sides-supported", 3, NULL, sides);
if (ppdFindOption(ppd, "Collate") != NULL)
p->type |= CUPS_PRINTER_COLLATE;
- if (ppdFindOption(ppd, "StapleLocation") != NULL)
+ if (p->pc && p->pc->finishings)
{
- p->type |= CUPS_PRINTER_STAPLE;
- finishings[num_finishings++] = IPP_FINISHINGS_STAPLE;
+ _pwg_finishings_t *fin; /* Current finishing value */
+
+ for (fin = (_pwg_finishings_t *)cupsArrayFirst(p->pc->finishings); fin; fin = (_pwg_finishings_t *)cupsArrayNext(p->pc->finishings))
+ {
+ if (num_finishings < (int)(sizeof(finishings) / sizeof(finishings[0])))
+ finishings[num_finishings++] = fin->value;
+
+ switch (fin->value)
+ {
+ case IPP_FINISHINGS_BIND :
+ case IPP_FINISHINGS_BIND_LEFT :
+ case IPP_FINISHINGS_BIND_TOP :
+ case IPP_FINISHINGS_BIND_RIGHT :
+ case IPP_FINISHINGS_BIND_BOTTOM :
+ case IPP_FINISHINGS_EDGE_STITCH :
+ case IPP_FINISHINGS_EDGE_STITCH_LEFT :
+ case IPP_FINISHINGS_EDGE_STITCH_TOP :
+ case IPP_FINISHINGS_EDGE_STITCH_RIGHT :
+ case IPP_FINISHINGS_EDGE_STITCH_BOTTOM :
+ p->type |= CUPS_PRINTER_BIND;
+ break;
+
+ case IPP_FINISHINGS_COVER :
+ p->type |= CUPS_PRINTER_COVER;
+ break;
+
+ case IPP_FINISHINGS_PUNCH :
+ case IPP_FINISHINGS_PUNCH_TOP_LEFT :
+ case IPP_FINISHINGS_PUNCH_BOTTOM_LEFT :
+ case IPP_FINISHINGS_PUNCH_TOP_RIGHT :
+ case IPP_FINISHINGS_PUNCH_BOTTOM_RIGHT :
+ case IPP_FINISHINGS_PUNCH_DUAL_LEFT :
+ case IPP_FINISHINGS_PUNCH_DUAL_TOP :
+ case IPP_FINISHINGS_PUNCH_DUAL_RIGHT :
+ case IPP_FINISHINGS_PUNCH_DUAL_BOTTOM :
+ case IPP_FINISHINGS_PUNCH_TRIPLE_LEFT :
+ case IPP_FINISHINGS_PUNCH_TRIPLE_TOP :
+ case IPP_FINISHINGS_PUNCH_TRIPLE_RIGHT :
+ case IPP_FINISHINGS_PUNCH_TRIPLE_BOTTOM :
+ case IPP_FINISHINGS_PUNCH_QUAD_LEFT :
+ case IPP_FINISHINGS_PUNCH_QUAD_TOP :
+ case IPP_FINISHINGS_PUNCH_QUAD_RIGHT :
+ case IPP_FINISHINGS_PUNCH_QUAD_BOTTOM :
+ p->type |= CUPS_PRINTER_PUNCH;
+ break;
+
+ case IPP_FINISHINGS_STAPLE :
+ case IPP_FINISHINGS_STAPLE_TOP_LEFT :
+ case IPP_FINISHINGS_STAPLE_BOTTOM_LEFT :
+ case IPP_FINISHINGS_STAPLE_TOP_RIGHT :
+ case IPP_FINISHINGS_STAPLE_BOTTOM_RIGHT :
+ case IPP_FINISHINGS_STAPLE_DUAL_LEFT :
+ case IPP_FINISHINGS_STAPLE_DUAL_TOP :
+ case IPP_FINISHINGS_STAPLE_DUAL_RIGHT :
+ case IPP_FINISHINGS_STAPLE_DUAL_BOTTOM :
+ case IPP_FINISHINGS_STAPLE_TRIPLE_LEFT :
+ case IPP_FINISHINGS_STAPLE_TRIPLE_TOP :
+ case IPP_FINISHINGS_STAPLE_TRIPLE_RIGHT :
+ case IPP_FINISHINGS_STAPLE_TRIPLE_BOTTOM :
+ p->type |= CUPS_PRINTER_STAPLE;
+ break;
+
+ default :
+ break;
+ }
+ }
}
- if (ppdFindOption(ppd, "BindEdge") != NULL)
+ if (p->pc && p->pc->templates)
{
- p->type |= CUPS_PRINTER_BIND;
- finishings[num_finishings++] = IPP_FINISHINGS_BIND;
+ const char *template; /* Finishing template */
+ ipp_attribute_t *fin_col_db; /* finishings-col-database attribute */
+ ipp_t *fin_col; /* finishings-col value */
+
+ fin_col_db = ippAddCollections(p->ppd_attrs, IPP_TAG_PRINTER, "finishings-col-database", cupsArrayCount(p->pc->templates), NULL);
+ for (i = 0, template = (const char *)cupsArrayFirst(p->pc->templates); template; i ++, template = (const char *)cupsArrayNext(p->pc->templates))
+ {
+ fin_col = ippNew();
+ ippAddString(fin_col, IPP_TAG_PRINTER, IPP_TAG_KEYWORD, "finishing-template", NULL, template);
+ ippSetCollection(p->ppd_attrs, &fin_col_db, i, fin_col);
+ ippDelete(fin_col);
+ }
}
for (i = 0; i < ppd->num_sizes; i ++)
CGContextRef context; /* The CG context used for resizing */
snprintf(outPath, sizeof(outPath), "%s/%s.png", CacheDir, p->name);
- outUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault,
- (UInt8 *)outPath,
- strlen(outPath),
- FALSE);
- icnsFileUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault,
- (UInt8 *)ppd_attr->value,
- strlen(ppd_attr->value),
- FALSE);
+ outUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault, (UInt8 *)outPath, (CFIndex)strlen(outPath), FALSE);
+ icnsFileUrl = CFURLCreateFromFileSystemRepresentation(kCFAllocatorDefault, (UInt8 *)ppd_attr->value, (CFIndex)strlen(ppd_attr->value), FALSE);
if (outUrl && icnsFileUrl)
{
sourceRef = CGImageSourceCreateWithURL(icnsFileUrl, NULL);
if (sourceRef)
{
- for (i = 0; i < CGImageSourceGetCount(sourceRef); i ++)
+ for (i = 0; i < (int)CGImageSourceGetCount(sourceRef); i ++)
{
- imageRef = CGImageSourceCreateImageAtIndex(sourceRef, i, NULL);
+ imageRef = CGImageSourceCreateImageAtIndex(sourceRef, (size_t)i, NULL);
if (!imageRef)
continue;
pstatus = ppdLastError(&pline);
- cupsdLogMessage(CUPSD_LOG_ERROR, "PPD file for %s cannot be loaded!",
- p->name);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "PPD file for %s cannot be loaded.", p->name);
if (pstatus <= PPD_ALLOC_ERROR)
- cupsdLogMessage(CUPSD_LOG_ERROR, "%s", strerror(errno));
+ cupsdLogMessage(CUPSD_LOG_ERROR, "%s: %s", ppd_name, strerror(errno));
else
- cupsdLogMessage(CUPSD_LOG_ERROR, "%s on line %d.",
- ppdErrorString(pstatus), pline);
+ cupsdLogMessage(CUPSD_LOG_ERROR, "%s on line %d of %s.", ppdErrorString(pstatus), pline, ppd_name);
cupsdLogMessage(CUPSD_LOG_INFO,
"Hint: Run \"cupstestppd %s\" and fix any errors.",
}
else
{
- /*
- * If we have an interface script, add a filter entry for it...
- */
-
- char interface[1024]; /* Interface script */
-
-
- snprintf(interface, sizeof(interface), "%s/interfaces/%s", ServerRoot,
- p->name);
- if (!access(interface, X_OK))
- {
- /*
- * Yes, we have a System V style interface script; use it!
- */
-
- ippAddString(p->ppd_attrs, IPP_TAG_PRINTER, IPP_TAG_TEXT,
- "printer-make-and-model", NULL,
- "Local System V Printer");
- }
- else if (!strncmp(p->device_uri, "ipp://", 6) &&
- (strstr(p->device_uri, "/printers/") != NULL ||
- strstr(p->device_uri, "/classes/") != NULL ||
- (strstr(p->device_uri, "._ipp.") != NULL &&
- !strcmp(p->device_uri + strlen(p->device_uri) - 5,
- "/cups"))))
+ if (((!strncmp(p->device_uri, "ipp://", 6) ||
+ !strncmp(p->device_uri, "ipps://", 7)) &&
+ (strstr(p->device_uri, "/printers/") != NULL ||
+ strstr(p->device_uri, "/classes/") != NULL)) ||
+ ((strstr(p->device_uri, "._ipp.") != NULL ||
+ strstr(p->device_uri, "._ipps.") != NULL) &&
+ !strcmp(p->device_uri + strlen(p->device_uri) - 5, "/cups")))
{
/*
* Tell the client this is really a hard-wired remote printer.
p->type |= CUPS_PRINTER_REMOTE;
- /*
- * Point the printer-uri-supported attribute to the
- * remote printer...
- */
-
- if (strchr(p->device_uri, '?'))
- {
- /*
- * Strip trailing "?options" from URI...
- */
-
- char resource[HTTP_MAX_URI], /* New URI */
- *ptr; /* Pointer into URI */
-
- strlcpy(resource, p->device_uri, sizeof(resource));
- if ((ptr = strchr(resource, '?')) != NULL)
- *ptr = '\0';
-
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI,
- "printer-uri-supported", NULL, resource);
- }
- else
- ippAddString(p->attrs, IPP_TAG_PRINTER, IPP_TAG_URI,
- "printer-uri-supported", NULL, p->device_uri);
-
/*
* Then set the make-and-model accordingly...
*/
*/
static ipp_t * /* O - Collection value */
-new_media_col(_pwg_size_t *size, /* I - media-size/margin values */
+new_media_col(pwg_size_t *size, /* I - media-size/margin values */
const char *source, /* I - media-source value */
const char *type) /* I - media-type value */
{
}
-#ifdef __sgi
-/*
- * 'write_irix_config()' - Update the config files used by the IRIX
- * desktop tools.
- */
-
-static void
-write_irix_config(cupsd_printer_t *p) /* I - Printer to update */
-{
- char filename[1024]; /* Interface script filename */
- cups_file_t *fp; /* Interface script file */
- ipp_attribute_t *attr; /* Attribute data */
-
-
- /*
- * Add dummy interface and GUI scripts to fool SGI's "challenged" printing
- * tools. First the interface script that tells the tools what kind of
- * printer we have...
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/interface/%s", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePuts(fp, "#!/bin/sh\n");
-
- if ((attr = ippFindAttribute(p->attrs, "printer-make-and-model",
- IPP_TAG_TEXT)) != NULL)
- cupsFilePrintf(fp, "NAME=\"%s\"\n", attr->values[0].string.text);
- else if (p->type & CUPS_PRINTER_CLASS)
- cupsFilePuts(fp, "NAME=\"Printer Class\"\n");
- else
- cupsFilePuts(fp, "NAME=\"Remote Destination\"\n");
-
- if (p->type & CUPS_PRINTER_COLOR)
- cupsFilePuts(fp, "TYPE=ColorPostScript\n");
- else
- cupsFilePuts(fp, "TYPE=MonoPostScript\n");
-
- cupsFilePrintf(fp, "HOSTNAME=%s\n", ServerName);
- cupsFilePrintf(fp, "HOSTPRINTER=%s\n", p->name);
-
- cupsFileClose(fp);
-
- chmod(filename, 0755);
- chown(filename, User, Group);
- }
-
- /*
- * Then the member file that tells which device file the queue is connected
- * to... Networked printers use "/dev/null" in this file, so that's what
- * we use (the actual device URI can confuse some apps...)
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/member/%s", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePuts(fp, "/dev/null\n");
-
- cupsFileClose(fp);
-
- chmod(filename, 0644);
- chown(filename, User, Group);
- }
-
- /*
- * The gui_interface file is a script or program that launches a GUI
- * option panel for the printer, using options specified on the
- * command-line in the third argument. The option panel must send
- * any printing options to stdout on a single line when the user
- * accepts them, or nothing if the user cancels the dialog.
- *
- * The default options panel program is /usr/bin/glpoptions, from
- * the ESP Print Pro software. You can select another using the
- * PrintcapGUI option.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/gui_interface/ELF/%s.gui", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePuts(fp, "#!/bin/sh\n");
- cupsFilePrintf(fp, "%s -d %s -o \"$3\"\n", PrintcapGUI, p->name);
-
- cupsFileClose(fp);
-
- chmod(filename, 0755);
- chown(filename, User, Group);
- }
-
- /*
- * The POD config file is needed by the printstatus command to show
- * the printer location and device.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.config", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePrintf(fp, "Printer Class | %s\n",
- (p->type & CUPS_PRINTER_COLOR) ? "ColorPostScript" : "MonoPostScript");
- cupsFilePrintf(fp, "Printer Model | %s\n", p->make_model ? p->make_model : "");
- cupsFilePrintf(fp, "Location Code | %s\n", p->location ? p->location : "");
- cupsFilePrintf(fp, "Physical Location | %s\n", p->info ? p->info : "");
- cupsFilePrintf(fp, "Port Path | %s\n", p->device_uri);
- cupsFilePrintf(fp, "Config Path | /var/spool/lp/pod/%s.config\n", p->name);
- cupsFilePrintf(fp, "Active Status Path | /var/spool/lp/pod/%s.status\n", p->name);
- cupsFilePuts(fp, "Status Update Wait | 10 seconds\n");
-
- cupsFileClose(fp);
-
- chmod(filename, 0664);
- chown(filename, User, Group);
- }
-}
-
-
-/*
- * 'write_irix_state()' - Update the status files used by IRIX printing
- * desktop tools.
- */
-
-static void
-write_irix_state(cupsd_printer_t *p) /* I - Printer to update */
-{
- char filename[1024]; /* Interface script filename */
- cups_file_t *fp; /* Interface script file */
- int tag; /* Status tag value */
-
-
- if (p)
- {
- /*
- * The POD status file is needed for the printstatus window to
- * provide the current status of the printer.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/pod/%s.status", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePrintf(fp, "Operational Status | %s\n",
- (p->state == IPP_PRINTER_IDLE) ? "Idle" :
- (p->state == IPP_PRINTER_PROCESSING) ? "Busy" :
- "Faulted");
- cupsFilePrintf(fp, "Information | 01 00 00 | %s\n", CUPS_SVERSION);
- cupsFilePrintf(fp, "Information | 02 00 00 | Device URI: %s\n",
- p->device_uri);
- cupsFilePrintf(fp, "Information | 03 00 00 | %s jobs\n",
- p->accepting ? "Accepting" : "Not accepting");
- cupsFilePrintf(fp, "Information | 04 00 00 | %s\n", p->state_message);
-
- cupsFileClose(fp);
-
- chmod(filename, 0664);
- chown(filename, User, Group);
- }
-
- /*
- * The activeicons file is needed to provide desktop icons for printers:
- *
- * [ quoted from /usr/lib/print/tagit ]
- *
- * --- Type of printer tags (base values)
- *
- * Dumb=66048 # 0x10200
- * DumbColor=66080 # 0x10220
- * Raster=66112 # 0x10240
- * ColorRaster=66144 # 0x10260
- * Plotter=66176 # 0x10280
- * PostScript=66208 # 0x102A0
- * ColorPostScript=66240 # 0x102C0
- * MonoPostScript=66272 # 0x102E0
- *
- * --- Printer state modifiers for local printers
- *
- * Idle=0 # 0x0
- * Busy=1 # 0x1
- * Faulted=2 # 0x2
- * Unknown=3 # 0x3 (Faulted due to unknown reason)
- *
- * --- Printer state modifiers for network printers
- *
- * NetIdle=8 # 0x8
- * NetBusy=9 # 0x9
- * NetFaulted=10 # 0xA
- * NetUnknown=11 # 0xB (Faulted due to unknown reason)
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/activeicons/%s", p->name);
-
- if (p->type & CUPS_PRINTER_CLASS)
- unlink(filename);
- else if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- if (p->type & CUPS_PRINTER_COLOR)
- tag = 66240;
- else
- tag = 66272;
-
- if (p->type & CUPS_PRINTER_REMOTE)
- tag |= 8;
-
- if (p->state == IPP_PRINTER_PROCESSING)
- tag |= 1;
-
- else if (p->state == IPP_PRINTER_STOPPED)
- tag |= 2;
-
- cupsFilePuts(fp, "#!/bin/sh\n");
- cupsFilePrintf(fp, "#Tag %d\n", tag);
-
- cupsFileClose(fp);
-
- chmod(filename, 0755);
- chown(filename, User, Group);
- }
- }
-
- /*
- * The default file is needed by the printers window to show
- * the default printer.
- */
-
- snprintf(filename, sizeof(filename), "/var/spool/lp/default");
-
- if (DefaultPrinter != NULL)
- {
- if ((fp = cupsFileOpen(filename, "w")) != NULL)
- {
- cupsFilePrintf(fp, "%s\n", DefaultPrinter->name);
-
- cupsFileClose(fp);
-
- chmod(filename, 0644);
- chown(filename, User, Group);
- }
- }
- else
- unlink(filename);
-}
-#endif /* __sgi */
-
-
/*
* 'write_xml_string()' - Write a string with XML escaping.
*/
if (*s == '&')
{
if (s > start)
- cupsFileWrite(fp, start, s - start);
+ cupsFileWrite(fp, start, (size_t)(s - start));
cupsFilePuts(fp, "&");
start = s + 1;
else if (*s == '<')
{
if (s > start)
- cupsFileWrite(fp, start, s - start);
+ cupsFileWrite(fp, start, (size_t)(s - start));
cupsFilePuts(fp, "<");
start = s + 1;
if (s > start)
cupsFilePuts(fp, start);
}
-
-
-/*
- * End of "$Id: printers.c 7968 2008-09-19 23:03:01Z mike $".
- */
projects / thirdparty / cups.git / blobdiff