.I version
]
[
+.B \-p
+.I project
+]
+[
.I mode
]
.I files...
.B chattr
changes the file attributes on a Linux file system.
.PP
-The format of a symbolic mode is +-=[acdeijstuADST].
-.PP
-The operator `+' causes the selected attributes to be added to the
-existing attributes of the files; `-' causes them to be removed; and
-`=' causes them to be the only attributes that the files have.
-.PP
-The letters `acdeijstuADST' select the new attributes for the files:
-append only (a), compressed (c), no dump (d), extent format (e), immutable (i),
-data journalling (j), secure deletion (s), no tail-merging (t),
-undeletable (u), no atime updates (A), synchronous directory updates (D),
-synchronous updates (S), and top of directory hierarchy (T).
+The format of a symbolic mode is +-=[aAcCdDeijPsStTu].
+.PP
+The operator '+' causes the selected attributes to be added to the
+existing attributes of the files; '-' causes them to be removed; and '='
+causes them to be the only attributes that the files have.
+.PP
+The letters 'aAcCdDeFijPsStTu' select the new attributes for the files:
+append only (a),
+no atime updates (A),
+compressed (c),
+no copy on write (C),
+no dump (d),
+synchronous directory updates (D),
+extent format (e),
+case-insensitive directory lookups (F),
+immutable (i),
+data journalling (j),
+project hierarchy (P),
+secure deletion (s),
+synchronous updates (S),
+no tail-merging (t),
+top of directory hierarchy (T),
+and undeletable (u).
.PP
The following attributes are read-only, and may be listed by
.BR lsattr (1)
-but not modified by chattr: huge file (h), compression error (E),
-indexed directory (I), compression raw access (X), and compressed dirty
-file (Z).
+but not modified by chattr:
+encrypted (E),
+indexed directory (I),
+and inline data (N).
+.PP
+Not all flags are supported or utilized by all filesystems; refer to
+filesystem-specific man pages such as
+.BR btrfs (5),
+.BR ext4 (5),
+and
+.BR xfs (5)
+for more filesystem-specific details.
.SH OPTIONS
.TP
.B \-R
.TP
.BI \-v " version"
Set the file's version/generation number.
+.TP
+.BI \-p " project"
+Set the file's project number.
.SH ATTRIBUTES
+A file with the 'a' attribute set can only be open in append mode for writing.
+Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE
+capability can set or clear this attribute.
+.PP
When a file with the 'A' attribute set is accessed, its atime record is
not modified. This avoids a certain amount of disk I/O for laptop
systems.
.PP
-A file with the `a' attribute set can only be open in append mode for writing.
-Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE
-capability can set or clear this attribute.
-.PP
-A file with the `c' attribute set is automatically compressed on the disk
+A file with the 'c' attribute set is automatically compressed on the disk
by the kernel. A read from this file returns uncompressed data. A write to
-this file compresses data before storing them on the disk. Note: please
+this file compresses data before storing them on the disk. Note: please
make sure to read the bugs and limitations section at the end of this
document.
.PP
-When a directory with the `D' attribute set is modified,
-the changes are written synchronously on the disk; this is equivalent to
-the `dirsync' mount option applied to a subset of the files.
+A file with the 'C' attribute set will not be subject to copy-on-write
+updates. This flag is only supported on file systems which perform
+copy-on-write. (Note: For btrfs, the 'C' flag should be
+set on new or empty files. If it is set on a file which already has
+data blocks, it is undefined when the blocks assigned to the file will
+be fully stable. If the 'C' flag is set on a directory, it will have no
+effect on the directory, but new files created in that directory will
+have the No_COW attribute set.)
.PP
-A file with the `d' attribute set is not candidate for backup when the
+A file with the 'd' attribute set is not candidate for backup when the
.BR dump (8)
program is run.
.PP
-The 'E' attribute is used by the experimental compression patches to
-indicate that a compressed file has a compression error. It may not be
-set or reset using
-.BR chattr (1),
-although it can be displayed by
-.BR lsattr (1).
+When a directory with the 'D' attribute set is modified,
+the changes are written synchronously on the disk; this is equivalent to
+the 'dirsync' mount option applied to a subset of the files.
.PP
The 'e' attribute indicates that the file is using extents for mapping
the blocks on disk. It may not be removed using
.BR chattr (1).
.PP
+The 'E' attribute is used by the experimental encryption patches to
+indicate that the file has been encrypted. It may not be
+set or reset using
+.BR chattr (1),
+although it can be displayed by
+.BR lsattr (1).
+.PP
+A directory with the 'F' attribute set indicates that all the path
+lookups inside that directory are made in a case-insensitive fashion.
+This attribute can only be changed in empty directories on file systems
+with the fname_encoding feature enabled.
+.PP
+A file with the 'i' attribute cannot be modified: it cannot be deleted or
+renamed, no link can be created to this file, most of the file's
+metadata can not be modified, and the file can not be opened in write mode.
+Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE
+capability can set or clear this attribute.
+.PP
The 'I' attribute is used by the htree code to indicate that a directory
-is being indexed using hashed trees. It may not be set or reset using
+is being indexed using hashed trees. It may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
-The 'h' attribute indicates the file is storing its blocks in units of the
-filesystem blocksize instead of in units of sectors, and means that the file
-is (or at one time was) larger than 2TB. It may not be set or reset using
+A file with the 'j' attribute has all of its data written to the ext3 or
+ext4 journal before being written to the file itself, if the file system
+is mounted with the "data=ordered" or "data=writeback" options and the
+file system has a journal. When the filesystem is mounted with the
+"data=journal" option all file data is already journalled and this
+attribute has no effect. Only the superuser or a process possessing the
+CAP_SYS_RESOURCE capability can set or clear this attribute.
+.PP
+A file with the 'N' attribute set indicates that the file has data
+stored inline, within the inode itself. It may not be set or reset using
.BR chattr (1),
although it can be displayed by
.BR lsattr (1).
.PP
-A file with the `i' attribute cannot be modified: it cannot be deleted or
-renamed, no link can be created to this file and no data can be written
-to the file. Only the superuser or a process possessing the
-CAP_LINUX_IMMUTABLE capability can set or clear this attribute.
-.PP
-A file with the `j' attribute has all of its data written to the ext3
-journal before being written to the file itself, if the filesystem is
-mounted with the "data=ordered" or "data=writeback" options. When the
-filesystem is mounted with the "data=journal" option all file data
-is already journalled and this attribute has no effect.
-Only the superuser or a process possessing the CAP_SYS_RESOURCE
-capability can set or clear this attribute.
+A directory with the 'P' attribute set will enforce a hierarchical
+structure for project id's. This means that files and directory created
+in the directory will inherit the project id of the directory, rename
+operations are constrained so when a file or directory is moved into
+another directory, that the project id's much match. In addition, a
+hard link to file can only be created when the project id for the file
+and the destination directory match.
.PP
-When a file with the `s' attribute set is deleted, its blocks are zeroed
+When a file with the 's' attribute set is deleted, its blocks are zeroed
and written back to the disk. Note: please make sure to read the bugs
and limitations section at the end of this document.
.PP
-When a file with the `S' attribute set is modified,
+When a file with the 'S' attribute set is modified,
the changes are written synchronously on the disk; this is equivalent to
-the `sync' mount option applied to a subset of the files.
+the 'sync' mount option applied to a subset of the files.
.PP
-A directory with the 'T' attribute will be deemed to be the top of
+A file with the 't' attribute will not have a partial block fragment at
+the end of the file merged with other files (for those filesystems which
+support tail-merging). This is necessary for applications such as LILO
+which read the filesystem directly, and which don't understand tail-merged
+files. Note: As of this writing, the ext2 or ext3 filesystems do not
+(yet, except in very experimental patches) support tail-merging.
+.PP
+A directory with the 'T' attribute will be deemed to be the top of
directory hierarchies for the purposes of the Orlov block allocator.
This is a hint to the block allocator used by ext3 and ext4 that the
subdirectories under this directory are not related, and thus should be
where this attribute is not set, the Orlov block allocator will try to
group subdirectories closer together where possible.
.PP
-A file with the 't' attribute will not have a partial block fragment at
-the end of the file merged with other files (for those filesystems which
-support tail-merging). This is necessary for applications such as LILO
-which read the filesystem directly, and which don't understand tail-merged
-files. Note: As of this writing, the ext2 or ext3 filesystems do not
-(yet, except in very experimental patches) support tail-merging.
-.PP
-When a file with the `u' attribute set is deleted, its contents are
+When a file with the 'u' attribute set is deleted, its contents are
saved. This allows the user to ask for its undeletion. Note: please
make sure to read the bugs and limitations section at the end of this
document.
.PP
-The 'X' attribute is used by the experimental compression patches to
-indicate that a raw contents of a compressed file can be accessed
-directly. It currently may not be set or reset using
-.BR chattr (1),
-although it can be displayed by
-.BR lsattr (1).
-.PP
-The 'Z' attribute is used by the experimental compression patches to
-indicate a compressed file is dirty. It may not be set or reset using
-.BR chattr (1),
-although it can be displayed by
-.BR lsattr (1).
-.PP
.SH AUTHOR
.B chattr
was written by Remy Card <Remy.Card@linux.org>. It is currently being
maintained by Theodore Ts'o <tytso@alum.mit.edu>.
.SH BUGS AND LIMITATIONS
-The `c', 's', and `u' attributes are not honored
-by the ext2 and ext3 filesystems as implemented in the current mainline
-Linux kernels. These attributes may be implemented
-in future versions of the ext2 and ext3 filesystems.
+The 'c', 's', and 'u' attributes are not honored
+by the ext2, ext3, and ext4 filesystems as implemented in the current
+mainline Linux kernels.
+Setting 'a' and 'i' attributes will not affect the ability to write
+to already existing file descriptors.
.PP
-The `j' option is only useful if the filesystem is mounted as ext3.
+The 'j' option is only useful for ext3 and ext4 file systems.
.PP
-The `D' option is only useful on Linux kernel 2.5.19 and later.
+The 'D' option is only useful on Linux kernel 2.5.19 and later.
.SH AVAILABILITY
.B chattr
is part of the e2fsprogs package and is available from
http://e2fsprogs.sourceforge.net.
.SH SEE ALSO
-.BR lsattr (1)
+.BR lsattr (1),
+.BR btrfs (5),
+.BR ext4 (5),
+.BR xfs (5).
projects / thirdparty / e2fsprogs.git / blobdiff