1 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2 # 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2014
3 # Free Software Foundation, Inc.
5 # This file is free software; you can redistribute it and/or modify it
6 # under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful, but
11 # WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 # General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; see the file COPYING3. If not see
17 # <http://www.gnu.org/licenses/>.
19 ##############################################################################
20 ### WARNING: this file contains embedded tabs. Do not run untabify on this file.
22 m4_include(config/acx.m4)
23 m4_include(config/override.m4)
24 m4_include(config/proginstall.m4)
25 m4_include(config/elf.m4)
26 m4_include([libtool.m4])
27 m4_include([ltoptions.m4])
28 m4_include([ltsugar.m4])
29 m4_include([ltversion.m4])
30 m4_include([lt~obsolete.m4])
31 m4_include([config/isl.m4])
33 AC_INIT(move-if-change)
35 AC_DISABLE_OPTION_CHECKING
38 # if PWD already has a value, it is probably wrong.
39 if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
41 # Export original configure arguments for use by sub-configures.
42 # Quote arguments with shell meta charatcers.
43 TOPLEVEL_CONFIGURE_ARGUMENTS=
44 set -- "$progname" "$@"
48 *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
49 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
50 # if the argument is of the form -foo=baz, quote the baz part only
51 ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
54 # Add the quoted argument to the list.
55 TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
57 if test "$silent" = yes; then
58 TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
60 # Remove the initial space we just introduced and, as these will be
61 # expanded by make, quote '$'.
62 TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
63 AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
65 # Find the build, host, and target systems.
66 ACX_NONCANONICAL_BUILD
68 ACX_NONCANONICAL_TARGET
70 dnl Autoconf 2.5x and later will set a default program prefix if
71 dnl --target was used, even if it was the same as --host. Disable
72 dnl that behavior. This must be done before AC_CANONICAL_SYSTEM
74 test "$host_noncanonical" = "$target_noncanonical" &&
75 test "$program_prefix$program_suffix$program_transform_name" = \
77 program_transform_name=s,y,y,
82 m4_pattern_allow([^AS_FOR_TARGET$])dnl
83 m4_pattern_allow([^AS_FOR_BUILD$])dnl
85 # Get 'install' or 'install-sh' and its variants.
92 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
94 # We pass INSTALL explicitly to sub-makes. Make sure that it is not
96 if test "$INSTALL" = "${srcdir}/install-sh -c"; then
97 INSTALL="${srcpwd}/install-sh -c"
100 # Set srcdir to "." if that's what it is.
101 # This is important for multilib support.
103 if test "${pwd}" = "${srcpwd}" ; then
111 ### To add a new directory to the tree, first choose whether it is a target
112 ### or a host dependent tool. Then put it into the appropriate list
113 ### (library or tools, host or target), doing a dependency sort.
115 # Subdirs will be configured in the order listed in build_configdirs,
116 # configdirs, or target_configdirs; see the serialization section below.
118 # Dependency sorting is only needed when *configuration* must be done in
119 # a particular order. In all cases a dependency should be specified in
120 # the Makefile, whether or not it's implicitly specified here.
122 # Double entries in build_configdirs, configdirs, or target_configdirs may
123 # cause circular dependencies and break everything horribly.
125 # these library is used by various programs built for the build
128 build_libs="build-libiberty build-libcpp"
130 # these tools are built for the build environment
131 build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
133 # these libraries are used by various programs built for the host environment
135 host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
137 # these tools are built for the host environment
138 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
139 # know that we are building the simulator.
140 # binutils, gas and ld appear in that order because it makes sense to run
141 # "make check" in that particular order.
142 # If --enable-gold is used, "gold" may replace "ld".
143 host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1"
145 # libgcj represents the runtime libraries only used by gcj.
146 libgcj="target-libffi \
150 # these libraries are built for the target environment, and are built after
151 # the host libraries and the host tools (which may be a cross compiler)
152 # Note that libiberty is not a target library.
153 target_libraries="target-libgcc \
154 target-libbacktrace \
161 target-libstdc++-v3 \
162 target-libsanitizer \
173 # these tools are built using the target libraries, and are intended to
174 # run only in the target environment
176 # note: any program that *uses* libraries that are in the "target_libraries"
177 # list belongs in this list.
179 target_tools="target-rda"
181 ################################################################################
183 ## All tools belong in one of the four categories, and are assigned above
184 ## We assign ${configdirs} this way to remove all embedded newlines. This
185 ## is important because configure will choke if they ever get through.
186 ## ${configdirs} is directories we build using the host tools.
187 ## ${target_configdirs} is directories we build using the target tools.
188 configdirs=`echo ${host_libs} ${host_tools}`
189 target_configdirs=`echo ${target_libraries} ${target_tools}`
190 build_configdirs=`echo ${build_libs} ${build_tools}`
192 m4_divert_text([PARSE_ARGS],
195 m4_pushdef([AS_MESSAGE_LOG_FD], [])dnl
196 AC_MSG_ERROR([path to source, $srcdir, contains spaces])
197 m4_popdef([AS_MESSAGE_LOG_FD])dnl
200 ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
203 ################################################################################
205 srcname="gnu development package"
207 # This gets set non-empty for some net releases of packages.
210 # Define is_cross_compiler to save on calls to 'test'.
212 if test x"${host}" = x"${target}" ; then
215 is_cross_compiler=yes
218 # Find the build and target subdir names.
220 # Be sure to cover against remnants of an in-tree build.
221 if test $srcdir != . && test -d $srcdir/host-${host_noncanonical}; then
222 AC_MSG_ERROR([building out of tree but $srcdir contains host-${host_noncanonical}.
223 Use a pristine source tree when building in a separate tree])
226 # Skipdirs are removed silently.
228 # Noconfigdirs are removed loudly.
232 # Make sure we don't let GNU ld be added if we didn't want it.
233 if test x$with_gnu_ld = xno ; then
235 noconfigdirs="$noconfigdirs ld gold"
239 # Make sure we don't let GNU as be added if we didn't want it.
240 if test x$with_gnu_as = xno ; then
242 noconfigdirs="$noconfigdirs gas"
246 # Make sure we don't let ZLIB be added if we didn't want it.
247 if test x$with_system_zlib = xyes ; then
249 noconfigdirs="$noconfigdirs zlib"
252 # some tools are so dependent upon X11 that if we're not building with X,
253 # it's not even worth trying to configure, much less build, that tool.
256 yes | "") ;; # the default value for this tree is that X11 is available
258 skipdirs="${skipdirs} tk itcl libgui"
259 # We won't be able to build gdbtk without X.
262 *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
265 # Some are only suitable for cross toolchains.
266 # Remove these if host=target.
267 cross_only="target-libgloss target-newlib target-opcodes"
269 case $is_cross_compiler in
270 no) skipdirs="${skipdirs} ${cross_only}" ;;
273 # If both --with-headers and --with-libs are specified, default to
275 if test x"${with_headers}" != x && test x"${with_headers}" != xno \
276 && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
277 if test x"${with_newlib}" = x ; then
282 # Recognize --with-newlib/--without-newlib.
283 case ${with_newlib} in
284 no) skipdirs="${skipdirs} target-newlib" ;;
285 yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
288 AC_ARG_ENABLE(as-accelerator-for,
289 [AS_HELP_STRING([--enable-as-accelerator-for=ARG],
290 [build as offload target compiler.
291 Specify offload host triple by ARG])],
292 ENABLE_AS_ACCELERATOR_FOR=$enableval,
293 ENABLE_AS_ACCELERATOR_FOR=no)
295 AC_ARG_ENABLE(offload-targets,
296 [AS_HELP_STRING([--enable-offload-targets=LIST],
297 [enable offloading to devices from comma-separated LIST of
298 TARGET[=DIR]. Use optional path to find offload target compiler
301 if test x"$enable_offload_targets" = x; then
302 AC_MSG_ERROR([no offload targets specified])
304 ], [enable_offload_targets=])
306 # Handle --enable-gold, --enable-ld.
307 # --disable-gold [--enable-ld]
308 # Build only ld. Default option.
309 # --enable-gold [--enable-ld]
310 # Build both gold and ld. Install gold as "ld.gold", install ld
311 # as "ld.bfd" and "ld".
312 # --enable-gold=default [--enable-ld]
313 # Build both gold and ld. Install gold as "ld.gold" and "ld",
314 # install ld as "ld.bfd".
315 # --enable-gold[=default] --disable-ld
316 # Build only gold, which is then installed as both "ld.gold" and "ld".
317 # --enable-gold --enable-ld=default
318 # Build both gold (installed as "ld.gold") and ld (installed as "ld"
320 # In other words, ld is default
321 # --enable-gold=default --enable-ld=default
326 [AS_HELP_STRING([[--enable-gold[=ARG]]],
327 [build gold @<:@ARG={default,yes,no}@:>@])],
328 ENABLE_GOLD=$enableval,
330 case "${ENABLE_GOLD}" in
332 # Check for ELF target.
335 *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
336 | *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
337 | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
338 | *-*-solaris2* | *-*-nto* | *-*-nacl*)
340 *-*-linux*aout* | *-*-linux*oldld*)
348 if test "$is_elf" = "yes"; then
349 # Check for target supported by gold.
351 i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
352 | aarch64*-*-* | tilegx*-*-*)
353 configdirs="$configdirs gold"
354 if test x${ENABLE_GOLD} = xdefault; then
365 AC_MSG_ERROR([invalid --enable-gold argument])
370 [AS_HELP_STRING([[--enable-ld[=ARG]]],
371 [build ld @<:@ARG={default,yes,no}@:>@])],
372 ENABLE_LD=$enableval,
375 case "${ENABLE_LD}" in
377 if test x${default_ld} != x; then
378 AC_MSG_ERROR([either gold or ld can be the default ld])
384 if test x${ENABLE_GOLD} != xyes; then
385 AC_MSG_WARN([neither ld nor gold are enabled])
387 configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'`
390 AC_MSG_ERROR([invalid --enable-ld argument])
394 # Configure extra directories which are host specific
398 configdirs="$configdirs libtermcap" ;;
401 # A target can indicate whether a language isn't supported for some reason.
402 # Only spaces may be used in this macro; not newlines or tabs.
403 unsupported_languages=
405 # Remove more programs from consideration, based on the host or
406 # target this usually means that a port of the program doesn't
410 i[[3456789]]86-*-msdosdjgpp*)
411 noconfigdirs="$noconfigdirs tcl tk itcl"
416 AC_ARG_ENABLE(libquadmath,
417 AS_HELP_STRING([--disable-libquadmath],
418 [do not build libquadmath directory]),
419 ENABLE_LIBQUADMATH=$enableval,
420 ENABLE_LIBQUADMATH=yes)
421 if test "${ENABLE_LIBQUADMATH}" = "no" ; then
422 noconfigdirs="$noconfigdirs target-libquadmath"
426 AC_ARG_ENABLE(libquadmath-support,
427 AS_HELP_STRING([--disable-libquadmath-support],
428 [disable libquadmath support for Fortran]),
429 ENABLE_LIBQUADMATH_SUPPORT=$enableval,
430 ENABLE_LIBQUADMATH_SUPPORT=yes)
431 enable_libquadmath_support=
432 if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
433 enable_libquadmath_support=no
437 AC_ARG_ENABLE(libada,
438 [AS_HELP_STRING([--enable-libada], [build libada directory])],
439 ENABLE_LIBADA=$enableval,
441 if test "${ENABLE_LIBADA}" != "yes" ; then
442 noconfigdirs="$noconfigdirs gnattools"
445 AC_ARG_ENABLE(libssp,
446 [AS_HELP_STRING([--enable-libssp], [build libssp directory])],
447 ENABLE_LIBSSP=$enableval,
450 AC_ARG_ENABLE(libstdcxx,
451 AS_HELP_STRING([--disable-libstdcxx],
452 [do not build libstdc++-v3 directory]),
453 ENABLE_LIBSTDCXX=$enableval,
454 ENABLE_LIBSTDCXX=default)
455 [if test "${ENABLE_LIBSTDCXX}" = "no" ; then
456 noconfigdirs="$noconfigdirs target-libstdc++-v3"
459 # Save it here so that, even in case of --enable-libgcj, if the Java
460 # front-end isn't enabled, we still get libgcj disabled.
462 case $enable_libgcj in
464 # If we reset it here, it won't get added to noconfigdirs in the
465 # target-specific build rules, so it will be forcibly enabled
466 # (unless the Java language itself isn't enabled).
470 # Make sure we get it printed in the list of not supported target libs.
471 # Don't disable libffi, though, other languages use it.
472 noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
473 # Clear libgcj_saved so that even if java is enabled libffi won't be
479 AC_ARG_ENABLE(static-libjava,
480 [AS_HELP_STRING([[--enable-static-libjava[=ARG]]],
481 [build static libjava @<:@default=no@:>@])],
482 ENABLE_STATIC_LIBJAVA=$enableval,
483 ENABLE_STATIC_LIBJAVA=no)
484 enable_static_libjava=
485 if test "${ENABLE_STATIC_LIBJAVA}" = "yes" ; then
486 enable_static_libjava=yes
489 if test x$enable_static_libjava != xyes ; then
490 EXTRA_CONFIGARGS_LIBJAVA=--disable-static
492 AC_SUBST(EXTRA_CONFIGARGS_LIBJAVA)
494 # Disable libgomp on non POSIX hosted systems.
495 if test x$enable_libgomp = x ; then
496 # Enable libgomp by default on hosted POSIX systems.
498 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
500 *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
502 *-*-solaris2* | *-*-hpux11*)
504 *-*-darwin* | *-*-aix*)
507 noconfigdirs="$noconfigdirs target-libgomp"
512 # Disable libatomic on unsupported systems.
513 if test -d ${srcdir}/libatomic; then
514 if test x$enable_libatomic = x; then
515 AC_MSG_CHECKING([for libatomic support])
516 if (srcdir=${srcdir}/libatomic; \
517 . ${srcdir}/configure.tgt; \
518 test -n "$UNSUPPORTED")
521 noconfigdirs="$noconfigdirs target-libatomic"
528 # Disable libcilkrts on unsupported systems.
529 if test -d ${srcdir}/libcilkrts; then
530 if test x$enable_libcilkrts = x; then
531 AC_MSG_CHECKING([for libcilkrts support])
532 if (srcdir=${srcdir}/libcilkrts; \
533 . ${srcdir}/configure.tgt; \
534 test -n "$UNSUPPORTED")
537 noconfigdirs="$noconfigdirs target-libcilkrts"
544 # Disable libitm on unsupported systems.
545 if test -d ${srcdir}/libitm; then
546 if test x$enable_libitm = x; then
547 AC_MSG_CHECKING([for libitm support])
548 if (srcdir=${srcdir}/libitm; \
549 . ${srcdir}/configure.tgt; \
550 test -n "$UNSUPPORTED")
553 noconfigdirs="$noconfigdirs target-libitm"
560 # Disable libsanitizer on unsupported systems.
561 if test -d ${srcdir}/libsanitizer; then
562 if test x$enable_libsanitizer = x; then
563 AC_MSG_CHECKING([for libsanitizer support])
564 if (srcdir=${srcdir}/libsanitizer; \
565 . ${srcdir}/configure.tgt; \
566 test -n "$UNSUPPORTED")
569 noconfigdirs="$noconfigdirs target-libsanitizer"
576 # Disable libvtv on unsupported systems.
577 if test -d ${srcdir}/libvtv; then
578 if test x$enable_libvtv = x; then
579 AC_MSG_CHECKING([for libvtv support])
580 if (srcdir=${srcdir}/libvtv; \
581 . ${srcdir}/configure.tgt; \
582 test "$VTV_SUPPORTED" != "yes")
585 noconfigdirs="$noconfigdirs target-libvtv"
592 # Disable libquadmath for some systems.
595 noconfigdirs="$noconfigdirs target-libquadmath"
597 # libquadmath is unused on AIX and libquadmath build process use of
598 # LD_LIBRARY_PATH can break AIX bootstrap.
599 powerpc-*-aix* | rs6000-*-aix*)
600 noconfigdirs="$noconfigdirs target-libquadmath"
604 # Disable libssp for some systems.
607 # No hosted I/O support.
608 noconfigdirs="$noconfigdirs target-libssp"
610 powerpc-*-aix* | rs6000-*-aix*)
611 noconfigdirs="$noconfigdirs target-libssp"
614 # libssp uses a misaligned load to trigger a fault, but the RL78
615 # doesn't fault for those - instead, it gives a build-time error
616 # for explicit misaligned loads.
617 noconfigdirs="$noconfigdirs target-libssp"
621 # Disable libstdc++-v3 for some systems.
622 # Allow user to override this if they pass --enable-libstdc++-v3
623 if test "${ENABLE_LIBSTDCXX}" = "default" ; then
626 # VxWorks uses the Dinkumware C++ library.
627 noconfigdirs="$noconfigdirs target-libstdc++-v3"
630 # the C++ libraries don't build on top of CE's C libraries
631 noconfigdirs="$noconfigdirs target-libstdc++-v3"
634 noconfigdirs="$noconfigdirs target-libstdc++-v3"
639 # Disable Fortran for some systems.
642 # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
643 unsupported_languages="$unsupported_languages fortran"
647 # Disable Java if libffi is not supported.
679 powerpc-*-aix* | rs6000-*-aix*)
683 powerpc64-*-freebsd*)
687 s390-*-* | s390x-*-*)
689 sh-*-* | sh[[34]]*-*-*)
698 unsupported_languages="$unsupported_languages java"
702 # Disable Java, libgcj or related libraries for some systems.
706 i[[3456789]]86-*-darwin*)
708 x86_64-*-darwin[[912]]*)
711 noconfigdirs="$noconfigdirs ${libgcj}"
714 noconfigdirs="$noconfigdirs ${libgcj}"
717 noconfigdirs="$noconfigdirs ${libgcj}"
720 noconfigdirs="$noconfigdirs ${libgcj}"
723 noconfigdirs="$noconfigdirs ${libgcj}"
726 noconfigdirs="$noconfigdirs ${libgcj}"
729 noconfigdirs="$noconfigdirs ${libgcj}"
732 noconfigdirs="$noconfigdirs ${libgcj}"
735 noconfigdirs="$noconfigdirs ${libgcj}"
738 noconfigdirs="$noconfigdirs target-boehm-gc"
740 cris-*-* | crisv32-*-*)
741 unsupported_languages="$unsupported_languages java"
745 *) # See PR46792 regarding target-libffi.
746 noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
750 # In this case, it's because the hppa64-linux target is for
751 # the kernel only at this point and has no libc, and thus no
752 # headers, crt*.o, etc., all of which are needed by these.
753 unsupported_languages="$unsupported_languages java"
756 noconfigdirs="$noconfigdirs ${libgcj}"
761 # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
762 # build on HP-UX 10.20.
763 noconfigdirs="$noconfigdirs ${libgcj}"
766 noconfigdirs="$noconfigdirs ${libgcj}"
768 i[[3456789]]86-w64-mingw*)
769 noconfigdirs="$noconfigdirs ${libgcj}"
771 i[[3456789]]86-*-mingw*)
772 noconfigdirs="$noconfigdirs ${libgcj}"
775 noconfigdirs="$noconfigdirs ${libgcj}"
778 noconfigdirs="$noconfigdirs target-libffi target-boehm-gc"
781 # copied from rs6000-*-* entry
782 noconfigdirs="$noconfigdirs ${libgcj}"
785 noconfigdirs="$noconfigdirs ${libgcj}"
788 noconfigdirs="$noconfigdirs ${libgcj}"
792 # Disable the go frontend on systems where it is known to not work. Please keep
793 # this in sync with contrib/config-list.mk.
795 *-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix*)
796 unsupported_languages="$unsupported_languages go"
800 # Disable libgo for some systems where it is known to not work.
801 # For testing, you can easily override this with --enable-libgo.
802 if test x$enable_libgo = x; then
806 noconfigdirs="$noconfigdirs target-libgo"
808 *-*-cygwin* | *-*-mingw*)
809 noconfigdirs="$noconfigdirs target-libgo"
812 noconfigdirs="$noconfigdirs target-libgo"
817 # Default libgloss CPU subdirectory.
818 libgloss_dir="$target_cpu"
821 sh*-*-pe|mips*-*-pe|*arm-wince-pe)
830 cris-*-* | crisv32-*-*)
839 m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
856 # Disable newlib and libgloss for various target OSes.
859 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
861 i[[3456789]]86-*-linux*)
862 # This section makes it possible to build newlib natively on linux.
863 # If we are using a cross compiler then don't configure newlib.
864 if test x${is_cross_compiler} != xno ; then
865 noconfigdirs="$noconfigdirs target-newlib"
867 noconfigdirs="$noconfigdirs target-libgloss"
868 # If we are not using a cross compiler, do configure newlib.
869 # Note however, that newlib will only be configured in this situation
870 # if the --with-newlib option has been given, because otherwise
871 # 'target-newlib' will appear in skipdirs.
873 i[[3456789]]86-*-rdos*)
874 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
876 sh*-*-pe|mips*-*-pe|arm-wince-pe)
877 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
880 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
883 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
886 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
889 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
892 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
895 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
897 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
898 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
901 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
904 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
907 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
910 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
913 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
916 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
919 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
927 noconfigdirs="$noconfigdirs ld gas gdb gprof"
928 noconfigdirs="$noconfigdirs sim target-rda"
930 i[[3456789]]86-*-darwin*)
931 noconfigdirs="$noconfigdirs ld gprof"
932 noconfigdirs="$noconfigdirs sim target-rda"
934 x86_64-*-darwin[[912]]*)
935 noconfigdirs="$noconfigdirs ld gas gprof"
936 noconfigdirs="$noconfigdirs sim target-rda"
939 noconfigdirs="$noconfigdirs ld gas gdb gprof"
940 noconfigdirs="$noconfigdirs sim target-rda"
945 if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
946 && test -f /usr/local/include/gmp.h; then
951 # Remove unsupported stuff on all kaOS configurations.
952 noconfigdirs="$noconfigdirs target-libgloss"
959 noconfigdirs="$noconfigdirs target-libgloss"
961 # The tpf target doesn't support gdb yet.
963 noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
966 noconfigdirs="$noconfigdirs target-rda"
971 # ld works, but does not support shared libraries.
972 # gas doesn't generate exception information.
973 noconfigdirs="$noconfigdirs gas ld"
976 noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
979 # newlib is not 64 bit ready
980 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
982 sh*-*-pe|mips*-*-pe|*arm-wince-pe)
983 noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
986 noconfigdirs="$noconfigdirs target-libgloss"
989 noconfigdirs="$noconfigdirs target-libgloss"
992 noconfigdirs="$noconfigdirs ld target-libgloss"
997 if test x${with_avrlibc} != xno; then
998 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
1001 c4x-*-* | tic4x-*-*)
1002 noconfigdirs="$noconfigdirs target-libgloss"
1005 noconfigdirs="$noconfigdirs target-libgloss gdb"
1008 noconfigdirs="$noconfigdirs target-libgloss"
1011 noconfigdirs="$noconfigdirs gdb"
1014 noconfigdirs="$noconfigdirs gdb"
1017 noconfigdirs="$noconfigdirs gprof"
1020 noconfigdirs="$noconfigdirs target-libgloss"
1023 noconfigdirs="$noconfigdirs target-libgloss"
1025 hppa1.1-*-osf* | hppa1.1-*-bsd* )
1033 hppa*-*-openbsd* | \
1037 noconfigdirs="$noconfigdirs ld"
1042 noconfigdirs="$noconfigdirs ld"
1045 noconfigdirs="$noconfigdirs gdb"
1048 # No gdb support yet.
1049 noconfigdirs="$noconfigdirs readline libgui itcl gdb"
1052 # No ld support yet.
1053 noconfigdirs="$noconfigdirs libgui itcl ld"
1056 # No ld support yet.
1057 noconfigdirs="$noconfigdirs libgui itcl ld"
1059 i[[3456789]]86-w64-mingw*)
1061 i[[3456789]]86-*-mingw*)
1062 target_configdirs="$target_configdirs target-winsup"
1065 target_configdirs="$target_configdirs target-libtermcap target-winsup"
1066 noconfigdirs="$noconfigdirs target-libgloss"
1067 # always build newlib if winsup directory is present.
1068 if test -d "$srcdir/winsup/cygwin"; then
1069 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
1070 elif test -d "$srcdir/newlib"; then
1071 echo "Warning: winsup/cygwin is missing so newlib can't be built."
1074 i[[3456789]]86-*-pe)
1075 noconfigdirs="$noconfigdirs target-libgloss"
1077 i[[3456789]]86-*-sco3.2v5*)
1078 # The linker does not yet know about weak symbols in COFF,
1079 # and is not configured to handle mixed ELF and COFF.
1080 noconfigdirs="$noconfigdirs ld target-libgloss"
1082 i[[3456789]]86-*-sco*)
1083 noconfigdirs="$noconfigdirs gprof target-libgloss"
1085 i[[3456789]]86-*-solaris2* | x86_64-*-solaris2.1[[0-9]]*)
1086 noconfigdirs="$noconfigdirs target-libgloss"
1088 i[[3456789]]86-*-sysv4*)
1089 noconfigdirs="$noconfigdirs target-libgloss"
1091 i[[3456789]]86-*-beos*)
1092 noconfigdirs="$noconfigdirs gdb"
1094 i[[3456789]]86-*-rdos*)
1095 noconfigdirs="$noconfigdirs gdb"
1098 noconfigdirs="$noconfigdirs gdb"
1101 noconfigdirs="$noconfigdirs sim"
1104 # copied from rs6000-*-* entry
1105 noconfigdirs="$noconfigdirs gprof"
1107 powerpc*-*-winnt* | powerpc*-*-pe*)
1108 target_configdirs="$target_configdirs target-winsup"
1109 noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
1110 # always build newlib.
1111 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
1113 # This is temporary until we can link against shared libraries
1114 powerpcle-*-solaris*)
1115 noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
1118 noconfigdirs="$noconfigdirs gdb"
1121 noconfigdirs="$noconfigdirs gprof"
1124 noconfigdirs="$noconfigdirs gprof"
1127 noconfigdirs="$noconfigdirs gprof"
1130 noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
1133 noconfigdirs="$noconfigdirs gprof"
1135 mips*-sde-elf* | mips*-mti-elf*)
1136 if test x$with_newlib = xyes; then
1137 noconfigdirs="$noconfigdirs gprof"
1141 noconfigdirs="$noconfigdirs gprof target-libgloss"
1144 noconfigdirs="$noconfigdirs gprof target-libgloss"
1147 noconfigdirs="$noconfigdirs ld gas gprof target-libgloss"
1151 mips*-*-ultrix* | mips*-*-osf* | mips*-*-ecoff* | mips*-*-pe* \
1152 | mips*-*-irix* | mips*-*-lnews* | mips*-*-riscos*)
1153 noconfigdirs="$noconfigdirs ld gas gprof"
1156 noconfigdirs="$noconfigdirs gprof"
1159 # nvptx is just a compiler
1160 noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
1167 noconfigdirs="$noconfigdirs target-libgloss" ;;
1171 if test x${is_cross_compiler} = xno ; then
1176 noconfigdirs="$noconfigdirs sim"
1178 tilepro*-*-* | tilegx*-*-*)
1179 noconfigdirs="$noconfigdirs sim"
1182 noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
1185 noconfigdirs="$noconfigdirs target-newlib target-libgloss"
1189 # If we aren't building newlib, then don't build libgloss, since libgloss
1190 # depends upon some newlib header files.
1191 case "${noconfigdirs}" in
1192 *target-libgloss*) ;;
1193 *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
1196 # Work in distributions that contain no compiler tools, like Autoconf.
1197 host_makefile_frag=/dev/null
1198 if test -d ${srcdir}/config ; then
1200 i[[3456789]]86-*-msdosdjgpp*)
1201 host_makefile_frag="config/mh-djgpp"
1204 ACX_CHECK_CYGWIN_CAT_WORKS
1205 host_makefile_frag="config/mh-cygwin"
1208 host_makefile_frag="config/mh-mingw"
1211 host_makefile_frag="config/mh-alpha-linux"
1214 host_makefile_frag="config/mh-pa-hpux10"
1217 host_makefile_frag="config/mh-pa"
1220 host_makefile_frag="config/mh-pa"
1223 host_makefile_frag="config/mh-darwin"
1226 host_makefile_frag="config/mh-ppc-aix"
1229 host_makefile_frag="config/mh-ppc-aix"
1234 if test "${build}" != "${host}" ; then
1235 AR_FOR_BUILD=${AR_FOR_BUILD-ar}
1236 AS_FOR_BUILD=${AS_FOR_BUILD-as}
1237 CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
1238 CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
1239 GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
1240 GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
1241 GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
1242 DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
1243 LD_FOR_BUILD=${LD_FOR_BUILD-ld}
1244 NM_FOR_BUILD=${NM_FOR_BUILD-nm}
1245 RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib}
1246 WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres}
1247 WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc}
1249 AR_FOR_BUILD="\$(AR)"
1250 AS_FOR_BUILD="\$(AS)"
1251 CC_FOR_BUILD="\$(CC)"
1252 CXX_FOR_BUILD="\$(CXX)"
1253 GCJ_FOR_BUILD="\$(GCJ)"
1254 GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
1255 GOC_FOR_BUILD="\$(GOC)"
1256 DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
1257 LD_FOR_BUILD="\$(LD)"
1258 NM_FOR_BUILD="\$(NM)"
1259 RANLIB_FOR_BUILD="\$(RANLIB)"
1260 WINDRES_FOR_BUILD="\$(WINDRES)"
1261 WINDMC_FOR_BUILD="\$(WINDMC)"
1267 # We must set the default linker to the linker used by gcc for the correct
1268 # operation of libtool. If LD is not defined and we are using gcc, try to
1269 # set the LD default to the ld used by gcc.
1270 if test -z "$LD"; then
1271 if test "$GCC" = yes; then
1274 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
1276 gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
1278 case $gcc_prog_ld in
1279 # Accept absolute paths.
1280 [[\\/]* | [A-Za-z]:[\\/]*)]
1281 LD="$gcc_prog_ld" ;;
1286 # Check whether -static-libstdc++ -static-libgcc is supported.
1288 if test "$GCC" = yes; then
1289 saved_LDFLAGS="$LDFLAGS"
1291 LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
1292 AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
1295 #if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
1296 #error -static-libstdc++ not implemented
1299 [AC_MSG_RESULT([yes]); have_static_libs=yes],
1300 [AC_MSG_RESULT([no])])
1303 LDFLAGS="$saved_LDFLAGS"
1307 ACX_PROG_CMP_IGNORE_INITIAL
1309 AC_ARG_ENABLE([bootstrap],
1310 [AS_HELP_STRING([--enable-bootstrap],
1311 [enable bootstrapping @<:@yes if native build@:>@])],,
1312 enable_bootstrap=default)
1314 # Issue errors and warnings for invalid/strange bootstrap combinations.
1315 if test -r $srcdir/gcc/configure; then
1321 case "$have_compiler:$host:$target:$enable_bootstrap" in
1324 # Default behavior. Enable bootstrap if we have a compiler
1325 # and we are in a native configuration.
1326 yes:$build:$build:default)
1327 enable_bootstrap=yes ;;
1330 enable_bootstrap=no ;;
1332 # We have a compiler and we are in a native configuration, bootstrap is ok
1333 yes:$build:$build:yes)
1336 # Other configurations, but we have a compiler. Assume the user knows
1339 AC_MSG_WARN([trying to bootstrap a cross compiler])
1342 # No compiler: if they passed --enable-bootstrap explicitly, fail
1344 AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
1346 # Fail if wrong command line
1348 AC_MSG_ERROR([invalid option for --enable-bootstrap])
1352 # Used for setting $lt_cv_objdir
1355 # Check for GMP, MPFR and MPC
1356 gmplibs="-lmpc -lmpfr -lgmp"
1360 # Specify a location for mpc
1361 # check for this first so it ends up on the link line before mpfr.
1363 [AS_HELP_STRING([--with-mpc=PATH],
1364 [specify prefix directory for installed MPC package.
1365 Equivalent to --with-mpc-include=PATH/include
1366 plus --with-mpc-lib=PATH/lib])])
1367 AC_ARG_WITH(mpc-include,
1368 [AS_HELP_STRING([--with-mpc-include=PATH],
1369 [specify directory for installed MPC include files])])
1370 AC_ARG_WITH(mpc-lib,
1371 [AS_HELP_STRING([--with-mpc-lib=PATH],
1372 [specify directory for the installed MPC library])])
1374 if test "x$with_mpc" != x; then
1375 gmplibs="-L$with_mpc/lib $gmplibs"
1376 gmpinc="-I$with_mpc/include $gmpinc"
1378 if test "x$with_mpc_include" != x; then
1379 gmpinc="-I$with_mpc_include $gmpinc"
1381 if test "x$with_mpc_lib" != x; then
1382 gmplibs="-L$with_mpc_lib $gmplibs"
1384 if test "x$with_mpc$with_mpc_include$with_mpc_lib" = x && test -d ${srcdir}/mpc; then
1385 gmplibs='-L$$r/$(HOST_SUBDIR)/mpc/src/'"$lt_cv_objdir $gmplibs"
1386 gmpinc='-I$$s/mpc/src '"$gmpinc"
1387 # Do not test the mpc version. Assume that it is sufficient, since
1388 # it is in the source tree, and the library has not been built yet
1389 # but it would be included on the link line in the version check below
1390 # hence making the test fail.
1394 # Specify a location for mpfr
1395 # check for this first so it ends up on the link line before gmp.
1396 AC_ARG_WITH(mpfr-dir,
1397 [AS_HELP_STRING([--with-mpfr-dir=PATH], [this option has been REMOVED])],
1398 [AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
1399 Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])])
1402 [AS_HELP_STRING([--with-mpfr=PATH],
1403 [specify prefix directory for installed MPFR package.
1404 Equivalent to --with-mpfr-include=PATH/include
1405 plus --with-mpfr-lib=PATH/lib])])
1406 AC_ARG_WITH(mpfr-include,
1407 [AS_HELP_STRING([--with-mpfr-include=PATH],
1408 [specify directory for installed MPFR include files])])
1409 AC_ARG_WITH(mpfr-lib,
1410 [AS_HELP_STRING([--with-mpfr-lib=PATH],
1411 [specify directory for the installed MPFR library])])
1413 if test "x$with_mpfr" != x; then
1414 gmplibs="-L$with_mpfr/lib $gmplibs"
1415 gmpinc="-I$with_mpfr/include $gmpinc"
1417 if test "x$with_mpfr_include" != x; then
1418 gmpinc="-I$with_mpfr_include $gmpinc"
1420 if test "x$with_mpfr_lib" != x; then
1421 gmplibs="-L$with_mpfr_lib $gmplibs"
1423 if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
1424 # MPFR v3.1.0 moved the sources into a src sub-directory.
1425 if test -d ${srcdir}/mpfr/src; then
1426 gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
1427 gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
1428 extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
1430 gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
1431 gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
1432 extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
1434 # Do not test the mpfr version. Assume that it is sufficient, since
1435 # it is in the source tree, and the library has not been built yet
1436 # but it would be included on the link line in the version check below
1437 # hence making the test fail.
1441 # Specify a location for gmp
1442 AC_ARG_WITH(gmp-dir,
1443 [AS_HELP_STRING([--with-gmp-dir=PATH], [this option has been REMOVED])],
1444 [AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
1445 Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])])
1448 [AS_HELP_STRING([--with-gmp=PATH],
1449 [specify prefix directory for the installed GMP package.
1450 Equivalent to --with-gmp-include=PATH/include
1451 plus --with-gmp-lib=PATH/lib])])
1452 AC_ARG_WITH(gmp-include,
1453 [AS_HELP_STRING([--with-gmp-include=PATH],
1454 [specify directory for installed GMP include files])])
1455 AC_ARG_WITH(gmp-lib,
1456 [AS_HELP_STRING([--with-gmp-lib=PATH],
1457 [specify directory for the installed GMP library])])
1460 if test "x$with_gmp" != x; then
1461 gmplibs="-L$with_gmp/lib $gmplibs"
1462 gmpinc="-I$with_gmp/include $gmpinc"
1464 if test "x$with_gmp_include" != x; then
1465 gmpinc="-I$with_gmp_include $gmpinc"
1467 if test "x$with_gmp_lib" != x; then
1468 gmplibs="-L$with_gmp_lib $gmplibs"
1470 if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
1471 gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs"
1472 gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
1473 extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
1474 extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
1475 extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
1476 # Do not test the gmp version. Assume that it is sufficient, since
1477 # it is in the source tree, and the library has not been built yet
1478 # but it would be included on the link line in the version check below
1479 # hence making the test fail.
1483 if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
1485 saved_CFLAGS="$CFLAGS"
1486 CFLAGS="$CFLAGS $gmpinc"
1487 # Check for the recommended and required versions of GMP.
1488 AC_MSG_CHECKING([for the correct version of gmp.h])
1489 AC_TRY_COMPILE([#include "gmp.h"],[
1490 #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
1491 #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
1492 #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,3)
1495 ], [AC_TRY_COMPILE([#include <gmp.h>],[
1496 #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
1497 #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
1498 #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,3,2)
1501 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
1502 [AC_MSG_RESULT([no]); have_gmp=no])
1504 # If we have GMP, check the MPFR version.
1505 if test x"$have_gmp" = xyes; then
1506 # Check for the recommended and required versions of MPFR.
1507 AC_MSG_CHECKING([for the correct version of mpfr.h])
1508 AC_TRY_COMPILE([#include <gmp.h>
1509 #include <mpfr.h>],[
1510 #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
1513 ], [AC_TRY_COMPILE([#include <gmp.h>
1514 #include <mpfr.h>],[
1515 #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2)
1518 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
1519 [AC_MSG_RESULT([no]); have_gmp=no])
1522 # Check for the MPC header version.
1523 if test x"$have_gmp" = xyes ; then
1524 # Check for the recommended and required versions of MPC.
1525 AC_MSG_CHECKING([for the correct version of mpc.h])
1526 AC_TRY_COMPILE([#include <mpc.h>],[
1527 #if MPC_VERSION < MPC_VERSION_NUM(0,8,0)
1530 ], [AC_TRY_COMPILE([#include <mpc.h>],[
1531 #if MPC_VERSION < MPC_VERSION_NUM(0,8,1)
1534 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
1535 [AC_MSG_RESULT([no]); have_gmp=no])
1538 # Now check the MPFR library.
1539 if test x"$have_gmp" = xyes; then
1541 LIBS="$LIBS $gmplibs"
1542 AC_MSG_CHECKING([for the correct version of the gmp/mpfr/mpc libraries])
1543 AC_TRY_LINK([#include <mpc.h>],[
1550 mpfr_atan2 (n, n, x, GMP_RNDN);
1551 mpfr_erfc (n, x, GMP_RNDN);
1552 mpfr_subnormalize (x, t, GMP_RNDN);
1556 mpc_set_ui_ui (c, 1, 1, MPC_RNDNN);
1557 mpc_cosh (c, c, MPC_RNDNN);
1558 mpc_pow (c, c, c, MPC_RNDNN);
1559 mpc_acosh (c, c, MPC_RNDNN);
1561 ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
1565 CFLAGS="$saved_CFLAGS"
1567 # The library versions listed in the error message below should match
1568 # the HARD-minimums enforced above.
1569 if test x$have_gmp != xyes; then
1570 AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
1571 Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
1572 their locations. Source code for these libraries can be found at
1573 their respective hosting sites as well as at
1574 ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also
1575 http://gcc.gnu.org/install/prerequisites.html for additional info. If
1576 you obtained GMP, MPFR and/or MPC from a vendor distribution package,
1577 make sure that you have installed both the libraries and the header
1578 files. They may be located in separate packages.])
1582 # Flags needed for both GMP, MPFR and/or MPC.
1585 AC_SUBST(extra_mpfr_configure_flags)
1586 AC_SUBST(extra_mpc_gmp_configure_flags)
1587 AC_SUBST(extra_mpc_mpfr_configure_flags)
1588 AC_SUBST(extra_isl_gmp_configure_flags)
1590 # Allow host libstdc++ to be specified for static linking with PPL.
1591 AC_ARG_WITH(host-libstdcxx,
1592 [AS_HELP_STRING([--with-host-libstdcxx=L],
1593 [use linker arguments L to link with libstdc++
1594 when linking with PPL])])
1596 case $with_host_libstdcxx in
1598 AC_MSG_ERROR([-with-host-libstdcxx needs an argument])
1602 # Libraries to use for stage1 or when not bootstrapping.
1603 AC_ARG_WITH(stage1-libs,
1604 [AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])],
1605 [if test "$withval" = "no" -o "$withval" = "yes"; then
1608 stage1_libs=$withval
1610 [stage1_libs=$with_host_libstdcxx])
1611 AC_SUBST(stage1_libs)
1613 # Linker flags to use for stage1 or when not bootstrapping.
1614 AC_ARG_WITH(stage1-ldflags,
1615 [AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
1616 [if test "$withval" = "no" -o "$withval" = "yes"; then
1619 stage1_ldflags=$withval
1622 # In stage 1, default to linking libstdc++ and libgcc statically with GCC
1623 # if supported. But if the user explicitly specified the libraries to use,
1624 # trust that they are doing what they want.
1625 if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
1626 stage1_ldflags="-static-libstdc++ -static-libgcc"
1628 AC_SUBST(stage1_ldflags)
1630 # Libraries to use for stage2 and later builds. This defaults to the
1631 # argument passed to --with-host-libstdcxx.
1632 AC_ARG_WITH(boot-libs,
1633 [AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])],
1634 [if test "$withval" = "no" -o "$withval" = "yes"; then
1637 poststage1_libs=$withval
1639 [poststage1_libs=$with_host_libstdcxx])
1640 AC_SUBST(poststage1_libs)
1642 # Linker flags to use for stage2 and later builds.
1643 AC_ARG_WITH(boot-ldflags,
1644 [AS_HELP_STRING([--with-boot-ldflags=FLAGS],
1645 [linker flags for stage2 and later])],
1646 [if test "$withval" = "no" -o "$withval" = "yes"; then
1649 poststage1_ldflags=$withval
1651 [poststage1_ldflags=
1652 # In stages 2 and 3, default to linking libstdc++ and libgcc
1653 # statically. But if the user explicitly specified the libraries to
1654 # use, trust that they are doing what they want.
1655 if test "$poststage1_libs" = ""; then
1656 poststage1_ldflags="-static-libstdc++ -static-libgcc"
1658 AC_SUBST(poststage1_ldflags)
1660 # GCC GRAPHITE dependency ISL.
1661 # Basic setup is inlined here, actual checks are in config/isl.m4
1666 [Specify prefix directory for the installed ISL package.
1667 Equivalent to --with-isl-include=PATH/include
1668 plus --with-isl-lib=PATH/lib])])
1670 # Treat --without-isl as a request to disable
1671 # GRAPHITE support and skip all following checks.
1672 if test "x$with_isl" != "xno"; then
1674 dnl Provide configure switches and initialize islinc & isllibs
1675 dnl with user input.
1677 dnl The versions of ISL that work for Graphite
1679 dnl Only execute fail-action, if ISL has been requested.
1681 AC_MSG_ERROR([Unable to find a usable ISL. See config.log for details.])])
1684 # If the ISL check failed, disable builds of in-tree variant of ISL
1685 if test "x$with_isl" = xno ||
1686 test "x$gcc_cv_isl" = xno; then
1687 noconfigdirs="$noconfigdirs isl"
1694 # Check for LTO support.
1696 [AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
1697 enable_lto=$enableval,
1698 enable_lto=yes; default_enable_lto=yes)
1700 ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
1701 build_lto_plugin=yes
1702 ],[if test x"$default_enable_lto" = x"yes" ; then
1704 *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
1705 # On other non-ELF platforms, LTO has yet to be validated.
1709 # Apart from ELF platforms, only Windows and Darwin support LTO so far.
1710 # It would also be nice to check the binutils support, but we don't
1711 # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
1712 # warn during gcc/ subconfigure; unless you're bootstrapping with
1713 # -flto it won't be needed until after installation anyway.
1715 *-cygwin* | *-mingw* | *-apple-darwin*) ;;
1716 *) if test x"$enable_lto" = x"yes"; then
1717 AC_MSG_ERROR([LTO support is not enabled for this target.])
1722 # Among non-ELF, only Windows platforms support the lto-plugin so far.
1723 # Build it unless LTO was explicitly disabled.
1725 *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
1730 AC_ARG_ENABLE(linker-plugin-configure-flags,
1731 [AS_HELP_STRING([[--enable-linker-plugin-configure-flags=FLAGS]],
1732 [additional flags for configuring linker plugins @<:@none@:>@])],
1733 extra_linker_plugin_configure_flags=$enableval,
1734 extra_linker_plugin_configure_flags=)
1735 AC_SUBST(extra_linker_plugin_configure_flags)
1736 AC_ARG_ENABLE(linker-plugin-flags,
1737 [AS_HELP_STRING([[--enable-linker-plugin-flags=FLAGS]],
1738 [additional flags for configuring and building linker plugins @<:@none@:>@])],
1739 extra_linker_plugin_flags=$enableval,
1740 extra_linker_plugin_flags=)
1741 AC_SUBST(extra_linker_plugin_flags)
1744 # By default, C and C++ are the only stage 1 languages.
1745 stage1_languages=,c,
1747 # Target libraries that we bootstrap.
1748 bootstrap_target_libs=,target-libgcc,
1750 # Figure out what language subdirectories are present.
1751 # Look if the user specified --enable-languages="..."; if not, use
1752 # the environment variable $LANGUAGES if defined. $LANGUAGES might
1754 # NB: embedded tabs in this IF block -- do not untabify
1755 if test -d ${srcdir}/gcc; then
1756 if test x"${enable_languages+set}" != xset; then
1757 if test x"${LANGUAGES+set}" = xset; then
1758 enable_languages="${LANGUAGES}"
1759 echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
1761 enable_languages=all
1764 if test x"${enable_languages}" = x ||
1765 test x"${enable_languages}" = xyes;
1767 echo configure.in: --enable-languages needs at least one language argument 1>&2
1771 enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
1773 # 'f95' is the old name for the 'fortran' language. We issue a warning
1774 # and make the substitution.
1775 case ,${enable_languages}, in
1777 echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
1778 enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
1782 # If bootstrapping, C++ must be enabled.
1783 case ",$enable_languages,:$enable_bootstrap" in
1786 if test -f ${srcdir}/gcc/cp/config-lang.in; then
1787 enable_languages="${enable_languages},c++"
1789 AC_MSG_ERROR([bootstrapping requires c++ sources])
1794 # First scan to see if an enabled language requires some other language.
1795 # We assume that a given config-lang.in will list all the language
1796 # front ends it requires, even if some are required indirectly.
1797 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
1798 case ${lang_frag} in
1800 # The odd quoting in the next line works around
1801 # an apparent bug in bash 1.12 on linux.
1802 ${srcdir}/gcc/[[*]]/config-lang.in) ;;
1804 # From the config-lang.in, get $language, $lang_requires, and
1805 # $lang_requires_boot_languages.
1808 lang_requires_boot_languages=
1810 for other in ${lang_requires} ${lang_requires_boot_languages}; do
1811 case ,${enable_languages}, in
1815 echo " \`$other' language required by \`$language'; enabling" 1>&2
1816 enable_languages="${enable_languages},${other}"
1820 for other in ${lang_requires_boot_languages} ; do
1821 if test "$other" != "c"; then
1822 case ,${enable_stage1_languages}, in
1826 case ,${enable_languages}, in
1828 echo " '$other' language required by '$language' in stage 1; enabling" 1>&2
1829 enable_stage1_languages="$enable_stage1_languages,${other}"
1840 new_enable_languages=,c,
1842 # If LTO is enabled, add the LTO front end.
1843 if test "$enable_lto" = "yes" ; then
1844 case ,${enable_languages}, in
1846 *) enable_languages="${enable_languages},lto" ;;
1848 if test "${build_lto_plugin}" = "yes" ; then
1849 configdirs="$configdirs lto-plugin"
1853 missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
1854 potential_languages=,c,
1856 enabled_target_libs=
1857 disabled_target_libs=
1859 for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
1860 case ${lang_frag} in
1862 # The odd quoting in the next line works around
1863 # an apparent bug in bash 1.12 on linux.
1864 ${srcdir}/gcc/[[*]]/config-lang.in) ;;
1866 # From the config-lang.in, get $language, $target_libs,
1867 # $lang_dirs, $boot_language, and $build_by_default
1873 build_by_default=yes
1875 if test x${language} = x; then
1876 echo "${lang_frag} doesn't set \$language." 1>&2
1880 if test "$language" = "c++"; then
1885 case ,${enable_languages}, in
1887 # Language was explicitly selected; include it
1888 # unless it is C, which is enabled by default.
1889 if test "$language" != "c"; then
1894 # 'all' was selected, select it if it is a default language
1895 if test "$language" != "c"; then
1896 add_this_lang=${build_by_default}
1901 # Disable languages that need other directories if these aren't available.
1902 for i in $subdir_requires; do
1903 test -f "$srcdir/gcc/$i/config-lang.in" && continue
1904 case ,${enable_languages}, in
1906 # Specifically requested language; tell them.
1907 AC_MSG_ERROR([The gcc/$i directory contains parts of $language but is missing])
1911 add_this_lang=unsupported
1916 # Disable Ada if no preexisting GNAT is available.
1917 case ,${enable_languages},:${language}:${have_gnat} in
1918 *,${language},*:ada:no)
1919 # Specifically requested language; tell them.
1920 AC_MSG_ERROR([GNAT is required to build $language])
1924 add_this_lang=unsupported
1928 # Disable a language that is unsupported by the target.
1929 case " $unsupported_languages " in
1931 add_this_lang=unsupported
1935 case $add_this_lang in
1937 # Remove language-dependent dirs.
1938 disabled_target_libs="$disabled_target_libs $target_libs"
1939 noconfigdirs="$noconfigdirs $lang_dirs"
1942 # Remove language-dependent dirs; still show language as supported.
1943 disabled_target_libs="$disabled_target_libs $target_libs"
1944 noconfigdirs="$noconfigdirs $lang_dirs"
1945 potential_languages="${potential_languages}${language},"
1948 new_enable_languages="${new_enable_languages}${language},"
1949 potential_languages="${potential_languages}${language},"
1950 missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
1951 enabled_target_libs="$enabled_target_libs $target_libs"
1952 case "${boot_language}:,$enable_stage1_languages," in
1953 yes:* | *:*,$language,* | *:*,yes, | *:*,all,)
1954 # Add to (comma-separated) list of stage 1 languages.
1955 case ",$stage1_languages," in
1956 *,$language,* | ,yes, | ,all,) ;;
1957 *) stage1_languages="${stage1_languages}${language}," ;;
1959 # We need to bootstrap any supporting libraries.
1960 bootstrap_target_libs="${bootstrap_target_libs}${target_libs},"
1969 # Add target libraries which are only needed for disabled languages
1971 if test -n "$disabled_target_libs"; then
1972 for dir in $disabled_target_libs; do
1973 case " $enabled_target_libs " in
1975 *) noconfigdirs="$noconfigdirs $dir" ;;
1980 AC_ARG_ENABLE(stage1-languages,
1981 [AS_HELP_STRING([[--enable-stage1-languages[=all]]],
1982 [choose additional languages to build during
1983 stage1. Mostly useful for compiler development])],
1984 [case ,${enable_stage1_languages}, in
1986 # Set it to something that will have no effect in the loop below
1987 enable_stage1_languages=c ;;
1989 enable_stage1_languages=`echo $new_enable_languages | \
1990 sed -e "s/^,//" -e "s/,$//" ` ;;
1992 enable_stage1_languages=`echo ,$enable_stage1_languages, | \
1993 sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
1996 # Add "good" languages from enable_stage1_languages to stage1_languages,
1997 # while "bad" languages go in missing_languages. Leave no duplicates.
1998 for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
1999 case $potential_languages in
2001 case $stage1_languages in
2003 *) stage1_languages="$stage1_languages$i," ;;
2006 case $missing_languages in
2008 *) missing_languages="$missing_languages$i," ;;
2013 # Remove leading/trailing commas that were added for simplicity
2014 potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
2015 missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
2016 stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
2017 new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
2019 if test "x$missing_languages" != x; then
2021 The following requested languages could not be built: ${missing_languages}
2022 Supported languages are: ${potential_languages}])
2024 if test "x$new_enable_languages" != "x$enable_languages"; then
2025 echo The following languages will be built: ${new_enable_languages}
2026 enable_languages="$new_enable_languages"
2029 AC_SUBST(stage1_languages)
2030 ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[[^ ]]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" `
2033 # Handle --disable-<component> generically.
2034 for dir in $configdirs $build_configdirs $target_configdirs ; do
2035 dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
2036 varname=`echo $dirname | sed -e s/+/_/g`
2037 if eval test x\${enable_${varname}} "=" xno ; then
2038 noconfigdirs="$noconfigdirs $dir"
2042 # Check for Boehm's garbage collector
2043 AC_ARG_ENABLE(objc-gc,
2044 [AS_HELP_STRING([--enable-objc-gc],
2045 [enable use of Boehm's garbage collector with the
2046 GNU Objective-C runtime])],
2047 [case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
2048 *,objc,*:*:yes:*target-boehm-gc*)
2049 AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration])
2053 # Make sure we only build Boehm's garbage collector if required.
2054 case ,${enable_languages},:${enable_objc_gc} in
2056 # Keep target-boehm-gc if requested for Objective-C.
2059 # Otherwise remove target-boehm-gc depending on target-libjava.
2060 if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
2061 noconfigdirs="$noconfigdirs target-boehm-gc"
2066 # Disable libcilkrts, libitm, libsanitizer, libvtv if we're not building C++
2067 case ,${enable_languages}, in
2069 # Disable libcilkrts, libitm, libsanitizer if we're not building libstdc++
2070 case "${noconfigdirs}" in
2071 *target-libstdc++-v3*)
2072 noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer"
2078 noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer target-libvtv"
2082 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
2083 # $build_configdirs and $target_configdirs.
2084 # If we have the source for $noconfigdirs entries, add them to $notsupp.
2087 for dir in . $skipdirs $noconfigdirs ; do
2088 dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
2089 if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2090 configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
2091 if test -r $srcdir/$dirname/configure ; then
2092 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2095 notsupp="$notsupp $dir"
2099 if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2100 build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
2101 if test -r $srcdir/$dirname/configure ; then
2102 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2105 notsupp="$notsupp $dir"
2109 if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2110 target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
2111 if test -r $srcdir/$dirname/configure ; then
2112 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2115 notsupp="$notsupp $dir"
2121 # Quietly strip out all directories which aren't configurable in this tree.
2122 # This relies on all configurable subdirectories being autoconfiscated, which
2124 build_configdirs_all="$build_configdirs"
2126 for i in ${build_configdirs_all} ; do
2127 j=`echo $i | sed -e s/build-//g`
2128 if test -f ${srcdir}/$j/configure ; then
2129 build_configdirs="${build_configdirs} $i"
2133 configdirs_all="$configdirs"
2135 for i in ${configdirs_all} ; do
2136 if test -f ${srcdir}/$i/configure ; then
2137 configdirs="${configdirs} $i"
2141 target_configdirs_all="$target_configdirs"
2143 for i in ${target_configdirs_all} ; do
2144 j=`echo $i | sed -e s/target-//g`
2145 if test -f ${srcdir}/$j/configure ; then
2146 target_configdirs="${target_configdirs} $i"
2150 # libiberty-linker-plugin is special: it doesn't have its own source directory,
2151 # so we have to add it after the preceding checks.
2152 if test x"$extra_linker_plugin_flags$extra_linker_plugin_configure_flags" != x
2154 case " $configdirs " in
2156 # If we can build libiberty, we can also build libiberty-linker-plugin.
2157 configdirs="$configdirs libiberty-linker-plugin"
2158 extra_linker_plugin_configure_flags="$extra_linker_plugin_configure_flags \
2159 --with-libiberty=../libiberty-linker-plugin";;
2161 AC_MSG_ERROR([libiberty missing]);;
2165 # Sometimes we have special requirements for the host libiberty.
2166 extra_host_libiberty_configure_flags=
2167 case " $configdirs " in
2168 *" lto-plugin "* | *" libcc1 "*)
2169 # When these are to be built as shared libraries, the same applies to
2171 extra_host_libiberty_configure_flags=--enable-shared
2174 AC_SUBST(extra_host_libiberty_configure_flags)
2176 # Produce a warning message for the subdirs we can't configure.
2177 # This isn't especially interesting in the Cygnus tree, but in the individual
2178 # FSF releases, it's important to let people know when their machine isn't
2179 # supported by the one or two programs in a package.
2181 if test -n "${notsupp}" && test -z "${norecursion}" ; then
2182 # If $appdirs is non-empty, at least one of those directories must still
2183 # be configured, or we error out. (E.g., if the gas release supports a
2184 # specified target in some subdirs but not the gas subdir, we shouldn't
2185 # pretend that all is well.)
2186 if test -n "$appdirs" ; then
2187 for dir in $appdirs ; do
2188 if test -r $dir/Makefile.in ; then
2189 if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
2193 if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
2199 if test -n "$appdirs" ; then
2200 echo "*** This configuration is not supported by this package." 1>&2
2204 # Okay, some application will build, or we don't care to check. Still
2205 # notify of subdirs not getting built.
2206 echo "*** This configuration is not supported in the following subdirectories:" 1>&2
2207 echo " ${notsupp}" 1>&2
2208 echo " (Any other directories should still work fine.)" 1>&2
2216 # To find our prefix, in gcc_cv_tool_prefix.
2221 AC_ARG_WITH([build-sysroot],
2222 [AS_HELP_STRING([--with-build-sysroot=SYSROOT],
2223 [use sysroot as the system root during the build])],
2224 [if test x"$withval" != x ; then
2225 SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
2227 [SYSROOT_CFLAGS_FOR_TARGET=])
2228 AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
2230 AC_ARG_WITH([debug-prefix-map],
2231 [AS_HELP_STRING([--with-debug-prefix-map='A=B C=D ...'],
2232 [map A to B, C to D ... in debug information])],
2233 [if test x"$withval" != x; then
2234 DEBUG_PREFIX_CFLAGS_FOR_TARGET=
2235 for debug_map in $withval; do
2236 DEBUG_PREFIX_CFLAGS_FOR_TARGET="$DEBUG_PREFIX_CFLAGS_FOR_TARGET -fdebug-prefix-map=$debug_map"
2239 [DEBUG_PREFIX_CFLAGS_FOR_TARGET=])
2240 AC_SUBST(DEBUG_PREFIX_CFLAGS_FOR_TARGET)
2242 # During gcc bootstrap, if we use some random cc for stage1 then CFLAGS
2243 # might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS
2244 # might also be empty (or "-g", if a non-GCC C++ compiler is in the path).
2245 # We want to ensure that TARGET libraries (which we know are built with
2246 # gcc) are built with "-O2 -g", so include those options when setting
2247 # CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
2248 if test "x$CFLAGS_FOR_TARGET" = x; then
2249 CFLAGS_FOR_TARGET=$CFLAGS
2252 *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
2255 *" -g "* | *" -g3 "*) ;;
2256 *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
2259 AC_SUBST(CFLAGS_FOR_TARGET)
2261 if test "x$CXXFLAGS_FOR_TARGET" = x; then
2262 CXXFLAGS_FOR_TARGET=$CXXFLAGS
2263 case " $CXXFLAGS " in
2265 *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
2267 case " $CXXFLAGS " in
2268 *" -g "* | *" -g3 "*) ;;
2269 *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
2272 AC_SUBST(CXXFLAGS_FOR_TARGET)
2274 AC_SUBST(LDFLAGS_FOR_TARGET)
2276 # Handle --with-headers=XXX. If the value is not "yes", the contents of
2277 # the named directory are copied to $(tooldir)/sys-include.
2278 if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
2279 if test x${is_cross_compiler} = xno ; then
2280 echo 1>&2 '***' --with-headers is only supported when cross compiling
2283 if test x"${with_headers}" != xyes ; then
2284 x=${gcc_cv_tool_prefix}
2285 copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include"
2289 # Handle --with-libs=XXX. If the value is not "yes", the contents of
2290 # the name directories are copied to $(tooldir)/lib. Multiple directories
2292 if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
2293 if test x${is_cross_compiler} = xno ; then
2294 echo 1>&2 '***' --with-libs is only supported when cross compiling
2297 if test x"${with_libs}" != xyes ; then
2298 # Copy the libraries in reverse order, so that files in the first named
2299 # library override files in subsequent libraries.
2300 x=${gcc_cv_tool_prefix}
2301 for l in ${with_libs}; do
2302 copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}"
2307 # Set with_gnu_as, with_gnu_ld, and with_system_zlib as appropriate.
2309 # This is done by determining whether or not the appropriate directory
2310 # is available, and by checking whether or not specific configurations
2311 # have requested that this magic not happen.
2313 # The command line options always override the explicit settings in
2314 # configure.in, and the settings in configure.in override this magic.
2316 # If the default for a toolchain is to use GNU as and ld, and you don't
2317 # want to do that, then you should use the --without-gnu-as and
2318 # --without-gnu-ld options for the configure script. Similarly, if
2319 # the default is to use the included zlib and you don't want to do that,
2320 # you should use the --with-system-zlib option for the configure script.
2322 if test x${use_gnu_as} = x &&
2323 echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
2325 extra_host_args="$extra_host_args --with-gnu-as"
2328 if test x${use_gnu_ld} = x &&
2329 echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then
2331 extra_host_args="$extra_host_args --with-gnu-ld"
2334 if test x${use_included_zlib} = x &&
2335 echo " ${configdirs} " | grep " zlib " > /dev/null 2>&1 ; then
2338 with_system_zlib=yes
2339 extra_host_args="$extra_host_args --with-system-zlib"
2342 # If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
2343 # can detect this case.
2345 if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
2347 extra_host_args="$extra_host_args --with-newlib"
2350 # Handle ${copy_dirs}
2351 set fnord ${copy_dirs}
2353 while test $# != 0 ; do
2354 if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
2357 echo Copying $1 to $2
2359 # Use the install script to create the directory and all required
2360 # parent directories.
2361 if test -d $2 ; then
2365 ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
2368 # Copy the directory, assuming we have tar.
2369 # FIXME: Should we use B in the second tar? Not all systems support it.
2370 (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
2372 # It is the responsibility of the user to correctly adjust all
2373 # symlinks. If somebody can figure out how to handle them correctly
2374 # here, feel free to add the code.
2381 # Determine a target-dependent exec_prefix that the installed
2382 # gcc will search in. Keep this list sorted by triplet, with
2383 # the *-*-osname triplets last.
2386 i[[34567]]86-pc-msdosdjgpp*)
2387 md_exec_prefix=/dev/env/DJDIR/bin
2392 md_exec_prefix=/usr/ccs/bin
2396 extra_arflags_for_target=
2397 extra_nmflags_for_target=
2398 extra_ranlibflags_for_target=
2399 target_makefile_frag=/dev/null
2402 target_makefile_frag="config/mt-spu"
2404 mips*-sde-elf* | mips*-mti-elf*)
2405 target_makefile_frag="config/mt-sde"
2407 mipsisa*-*-elfoabi*)
2408 target_makefile_frag="config/mt-mips-elfoabi"
2410 mips*-*-*linux* | mips*-*-gnu*)
2411 target_makefile_frag="config/mt-mips-gnu"
2414 target_makefile_frag="config/mt-nios2-elf"
2416 *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
2417 target_makefile_frag="config/mt-gnu"
2419 *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
2420 # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
2421 # commands to handle both 32-bit and 64-bit objects. These flags are
2422 # harmless if we're using GNU nm or ar.
2423 extra_arflags_for_target=" -X32_64"
2424 extra_nmflags_for_target=" -B -X32_64"
2428 alphaieee_frag=/dev/null
2431 # This just makes sure to use the -mieee option to build target libs.
2432 # This should probably be set individually by each library.
2433 alphaieee_frag="config/mt-alphaieee"
2437 # If --enable-target-optspace always use -Os instead of -O2 to build
2438 # the target libraries, similarly if it is not specified, use -Os
2439 # on selected platforms.
2440 ospace_frag=/dev/null
2441 case "${enable_target_optspace}:${target}" in
2443 ospace_frag="config/mt-ospace"
2446 ospace_frag="config/mt-d30v"
2448 :m32r-* | :d10v-* | :fr30-*)
2449 ospace_frag="config/mt-ospace"
2454 echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
2458 # Some systems (e.g., one of the i386-aix systems the gas testers are
2459 # using) don't handle "\$" correctly, so don't use it here.
2460 tooldir='${exec_prefix}'/${target_noncanonical}
2461 build_tooldir=${tooldir}
2463 # Create a .gdbinit file which runs the one in srcdir
2464 # and tells GDB to look there for source files.
2466 if test -r ${srcdir}/.gdbinit ; then
2469 *) cat > ./.gdbinit <<EOF
2473 source ${srcdir}/.gdbinit
2479 # Make sure that the compiler is able to generate an executable. If it
2480 # can't, we are probably in trouble. We don't care whether we can run the
2481 # executable--we might be using a cross compiler--we only care whether it
2482 # can be created. At this point the main configure script has set CC.
2484 echo "int main () { return 0; }" > conftest.c
2485 ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
2486 if test $? = 0 ; then
2487 if test -s conftest || test -s conftest.exe ; then
2493 echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
2494 echo 1>&2 "*** You must set the environment variable CC to a working compiler."
2501 # Decide which environment variable is used to find dynamic libraries.
2503 *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
2504 *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
2505 *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
2506 *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
2509 # On systems where the dynamic library environment variable is PATH,
2510 # gcc/ will put dynamic libraries into a subdirectory to avoid adding
2511 # built executables to PATH.
2512 if test "$RPATH_ENVVAR" = PATH; then
2513 GCC_SHLIB_SUBDIR=/shlib
2518 # Adjust the toplevel makefile according to whether bootstrap was selected.
2519 case $enable_bootstrap in
2521 bootstrap_suffix=bootstrap
2522 BUILD_CONFIG=bootstrap-debug
2525 bootstrap_suffix=no-bootstrap
2530 AC_MSG_CHECKING(for default BUILD_CONFIG)
2532 AC_ARG_WITH([build-config],
2533 [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
2534 [use config/NAME.mk build configuration])],
2535 [case $with_build_config in
2536 yes) with_build_config= ;;
2537 no) with_build_config= BUILD_CONFIG= ;;
2540 if test "x${with_build_config}" != x; then
2541 BUILD_CONFIG=$with_build_config
2543 case $BUILD_CONFIG in
2545 if echo "int f (void) { return 0; }" > conftest.c &&
2546 ${CC} -c conftest.c &&
2547 mv conftest.o conftest.o.g0 &&
2548 ${CC} -c -g conftest.c &&
2549 mv conftest.o conftest.o.g &&
2550 ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
2555 rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
2559 AC_MSG_RESULT($BUILD_CONFIG)
2560 AC_SUBST(BUILD_CONFIG)
2562 # Use same top-level configure hooks in libgcc/libstdc++/libvtv.
2563 AC_MSG_CHECKING([for --enable-vtable-verify])
2564 AC_ARG_ENABLE(vtable-verify,
2565 [ --enable-vtable-verify Enable vtable verification feature ],
2566 [case "$enableval" in
2567 yes) enable_vtable_verify=yes ;;
2568 no) enable_vtable_verify=no ;;
2569 *) enable_vtable_verify=no;;
2571 [enable_vtable_verify=no])
2572 AC_MSG_RESULT($enable_vtable_verify)
2574 # Record target_configdirs and the configure arguments for target and
2575 # build configuration in Makefile.
2576 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
2577 build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
2578 bootstrap_fixincludes=no
2580 # If we are building libgomp, bootstrap it.
2581 if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
2582 bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
2585 # If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
2586 # or bootstrap-ubsan, bootstrap it.
2587 if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
2588 case "$BUILD_CONFIG" in
2589 *bootstrap-asan* | *bootstrap-ubsan* )
2590 bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
2591 bootstrap_fixincludes=yes
2596 # If we are building libvtv and --enable-vtable-verify, bootstrap it.
2597 if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
2598 test "$enable_vtable_verify" != no; then
2599 bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
2602 # Determine whether gdb needs tk/tcl or not.
2603 # Use 'maybe' since enable_gdbtk might be true even if tk isn't available
2604 # and in that case we want gdb to be built without tk. Ugh!
2605 # In fact I believe gdb is the *only* package directly dependent on tk,
2606 # so we should be able to put the 'maybe's in unconditionally and
2607 # leave out the maybe dependencies when enable_gdbtk is false. I'm not
2608 # 100% sure that that's safe though.
2610 gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
2611 case "$enable_gdbtk" in
2615 GDB_TK="${gdb_tk}" ;;
2617 # Only add the dependency on gdbtk when GDBtk is part of the gdb
2618 # distro. Eventually someone will fix this and move Insight, nee
2619 # gdbtk to a separate directory.
2620 if test -d ${srcdir}/gdb/gdbtk ; then
2627 CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
2628 INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
2630 # Strip out unwanted targets.
2632 # While at that, we remove Makefiles if we were started for recursive
2633 # configuration, so that the top-level Makefile reconfigures them,
2634 # like we used to do when configure itself was recursive.
2636 # Loop over modules. We used to use the "$extrasub" feature from Autoconf
2637 # but now we're fixing up the Makefile ourselves with the additional
2638 # commands passed to AC_CONFIG_FILES. Use separate variables
2639 # extrasub-{build,host,target} not because there is any reason to split
2640 # the substitutions up that way, but only to remain below the limit of
2641 # 99 commands in a script, for HP-UX sed.
2642 # Do not nest @if/@endif pairs, because configure will not warn you at all.
2644 case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
2645 yes:yes:*\ gold\ *:*,c++,*) ;;
2646 yes:yes:*\ gold\ *:*)
2647 AC_MSG_ERROR([in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages])
2652 for module in ${build_configdirs} ; do
2653 if test -z "${no_recursion}" \
2654 && test -f ${build_subdir}/${module}/Makefile; then
2655 echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
2656 rm -f ${build_subdir}/${module}/Makefile
2658 extrasub_build="$extrasub_build
2659 /^@if build-$module\$/d
2660 /^@endif build-$module\$/d
2661 /^@if build-$module-$bootstrap_suffix\$/d
2662 /^@endif build-$module-$bootstrap_suffix\$/d"
2665 for module in ${configdirs} ; do
2666 if test -z "${no_recursion}"; then
2667 for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
2668 if test -f ${file}; then
2669 echo 1>&2 "*** removing ${file} to force reconfigure"
2674 case ${module},${bootstrap_fixincludes} in
2675 fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
2676 *) host_bootstrap_suffix=$bootstrap_suffix ;;
2678 extrasub_host="$extrasub_host
2680 /^@endif $module\$/d
2681 /^@if $module-$host_bootstrap_suffix\$/d
2682 /^@endif $module-$host_bootstrap_suffix\$/d"
2685 for module in ${target_configdirs} ; do
2686 if test -z "${no_recursion}" \
2687 && test -f ${target_subdir}/${module}/Makefile; then
2688 echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
2689 rm -f ${target_subdir}/${module}/Makefile
2692 # We only bootstrap target libraries listed in bootstrap_target_libs.
2693 case $bootstrap_target_libs in
2694 *,target-$module,*) target_bootstrap_suffix=$bootstrap_suffix ;;
2695 *) target_bootstrap_suffix=no-bootstrap ;;
2698 extrasub_target="$extrasub_target
2699 /^@if target-$module\$/d
2700 /^@endif target-$module\$/d
2701 /^@if target-$module-$target_bootstrap_suffix\$/d
2702 /^@endif target-$module-$target_bootstrap_suffix\$/d"
2705 # Do the final fixup along with target modules.
2706 extrasub_target="$extrasub_target
2707 /^@if /,/^@endif /d"
2709 # Create the serialization dependencies. This uses a temporary file.
2711 AC_ARG_ENABLE([serial-configure],
2712 [AS_HELP_STRING([[--enable-serial-[{host,target,build}-]configure]],
2713 [force sequential configuration of
2714 sub-packages for the host, target or build
2715 machine, or all sub-packages])])
2717 case ${enable_serial_configure} in
2719 enable_serial_build_configure=yes
2720 enable_serial_host_configure=yes
2721 enable_serial_target_configure=yes
2725 # These force 'configure's to be done one at a time, to avoid problems
2726 # with contention over a shared config.cache.
2728 echo '# serdep.tmp' > serdep.tmp
2730 test "x${enable_serial_build_configure}" = xyes &&
2731 for item in ${build_configdirs} ; do
2734 *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
2739 test "x${enable_serial_host_configure}" = xyes &&
2740 for item in ${configdirs} ; do
2743 *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
2748 test "x${enable_serial_target_configure}" = xyes &&
2749 for item in ${target_configdirs} ; do
2752 *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
2756 serialization_dependencies=serdep.tmp
2757 AC_SUBST_FILE(serialization_dependencies)
2759 # Base args. Strip norecursion, cache-file, srcdir, host, build,
2760 # target, nonopt, and variable assignments. These are the ones we
2761 # might not want to pass down to subconfigures. The exception being
2762 # --cache-file=/dev/null, which is used to turn off the use of cache
2763 # files altogether, and which should be passed on to subconfigures.
2764 # Also strip program-prefix, program-suffix, and program-transform-name,
2765 # so that we can pass down a consistent program-transform-name.
2770 eval "set -- $ac_configure_args"
2773 if test X"$skip_next" = X"yes"; then
2777 if test X"$keep_next" = X"yes"; then
2780 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
2782 baseargs="$baseargs '$ac_arg'"
2783 tbaseargs="$tbaseargs '$ac_arg'"
2788 # Handle separated arguments. Based on the logic generated by
2791 *=* | --config-cache | -C | -disable-* | --disable-* \
2792 | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
2793 | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
2794 | -with-* | --with-* | -without-* | --without-* | --x)
2808 --with-* | --without-*)
2809 libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
2813 lib=`echo "$libopt" | sed 's,[-_]include$,,'`
2816 lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
2825 mpc | mpfr | gmp | isl)
2826 # If we're processing --with-$lib, --with-$lib-include or
2827 # --with-$lib-lib, for one of the libs above, and target is
2828 # different from host, don't pass the current argument to any
2829 # target library's configure.
2830 if test x$is_cross_compiler = xyes; then
2839 --cache-file=/dev/null | \
2840 -cache-file=/dev/null )
2841 # Handled here to avoid the test to skip args below.
2842 baseargs="$baseargs '$ac_arg'"
2843 tbaseargs="$tbaseargs '$ac_arg'"
2844 # Assert: $separate_arg should always be no.
2845 keep_next=$separate_arg
2861 -program-prefix* | \
2862 -program-suffix* | \
2863 -program-transform-name* )
2864 skip_next=$separate_arg
2868 # An option. Add it.
2871 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
2873 baseargs="$baseargs '$ac_arg'"
2874 if test X"$skip_targ" = Xno; then
2875 tbaseargs="$tbaseargs '$ac_arg'"
2877 keep_next=$separate_arg
2880 # Either a variable assignment, or a nonopt (triplet). Don't
2881 # pass it down; let the Makefile handle this.
2886 # Remove the initial space we just introduced and, as these will be
2887 # expanded by make, quote '$'.
2888 baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
2890 # Add in --program-transform-name, after --program-prefix and
2891 # --program-suffix have been applied to it. Autoconf has already
2892 # doubled dollar signs and backslashes in program_transform_name; we want
2893 # the backslashes un-doubled, and then the entire thing wrapped in single
2894 # quotes, because this will be expanded first by make and then by the shell.
2895 # Also, because we want to override the logic in subdir configure scripts to
2896 # choose program_transform_name, replace any s,x,x, with s,y,y,.
2897 sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
2898 ${program_transform_name}
2900 gcc_transform_name=`cat conftestsed.out`
2901 rm -f conftestsed.out
2902 baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
2903 tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
2904 if test "$silent" = yes; then
2905 baseargs="$baseargs --silent"
2906 tbaseargs="$tbaseargs --silent"
2908 baseargs="$baseargs --disable-option-checking"
2909 tbaseargs="$tbaseargs --disable-option-checking"
2911 # Record and document user additions to sub configure arguments.
2912 AC_ARG_VAR([build_configargs],
2913 [additional configure arguments for build directories])
2914 AC_ARG_VAR([host_configargs],
2915 [additional configure arguments for host directories])
2916 AC_ARG_VAR([target_configargs],
2917 [additional configure arguments for target directories])
2919 # For the build-side libraries, we just need to pretend we're native,
2920 # and not use the same cache file. Multilibs are neither needed nor
2921 # desired. We can't even use the same cache file for all build-side
2922 # libraries, as they're compiled differently; some with C, some with
2923 # C++ or with different feature-enabling options.
2924 build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
2926 # For host modules, accept cache file option, or specification as blank.
2927 case "${cache_file}" in
2929 cache_file_option="" ;;
2930 /* | [[A-Za-z]]:[[\\/]]* ) # absolute path
2931 cache_file_option="--cache-file=${cache_file}" ;;
2933 cache_file_option="--cache-file=../${cache_file}" ;;
2936 # Host dirs don't like to share a cache file either, horribly enough.
2937 # This seems to be due to autoconf 2.5x stupidity.
2938 host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
2940 target_configargs="$target_configargs ${tbaseargs}"
2942 # Passing a --with-cross-host argument lets the target libraries know
2943 # whether they are being built with a cross-compiler or being built
2944 # native. However, it would be better to use other mechanisms to make the
2945 # sorts of decisions they want to make on this basis. Please consider
2946 # this option to be deprecated. FIXME.
2947 if test x${is_cross_compiler} = xyes ; then
2948 target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
2951 # Special user-friendly check for native x86_64-linux build, if
2952 # multilib is not explicitly enabled.
2953 case "$target:$have_compiler:$host:$target:$enable_multilib" in
2954 x86_64-*linux*:yes:$build:$build:)
2955 # Make sure we have a developement environment that handles 32-bit
2957 echo "int main () { return 0; }" > conftest.c
2958 ${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
2959 if test $? = 0 ; then
2960 if test -s conftest || test -s conftest.exe ; then
2965 if test x${dev64} != xyes ; then
2966 AC_MSG_ERROR([I suspect your system does not have 32-bit developement libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib.])
2971 # Default to --enable-multilib.
2972 if test x${enable_multilib} = x ; then
2973 target_configargs="--enable-multilib ${target_configargs}"
2976 # Pass --with-newlib if appropriate. Note that target_configdirs has
2977 # changed from the earlier setting of with_newlib.
2978 if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
2979 target_configargs="--with-newlib ${target_configargs}"
2982 # Different target subdirs use different values of certain variables
2983 # (notably CXX). Worse, multilibs use *lots* of different values.
2984 # Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
2985 # it doesn't automatically accept command-line overrides of them.
2986 # This means it's not safe for target subdirs to share a cache file,
2987 # which is disgusting, but there you have it. Hopefully this can be
2988 # fixed in future. It's still worthwhile to use a cache file for each
2989 # directory. I think.
2991 # Pass the appropriate --build, --host, --target and --cache-file arguments.
2992 # We need to pass --target, as newer autoconf's requires consistency
2993 # for target_alias and gcc doesn't manage it consistently.
2994 target_configargs="--cache-file=./config.cache ${target_configargs}"
2997 case " $target_configdirs " in
2999 case " $target_configargs " in
3000 *" --with-newlib "*)
3003 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
3007 # If we're not building GCC, don't discard standard headers.
3008 if test -d ${srcdir}/gcc; then
3009 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
3011 if test "${build}" != "${host}"; then
3012 # On Canadian crosses, CC_FOR_TARGET will have already been set
3013 # by `configure', so we won't have an opportunity to add -Bgcc/
3014 # to it. This is right: we don't want to search that directory
3015 # for binaries, but we want the header files in there, so add
3017 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include -isystem $$r/$(HOST_SUBDIR)/gcc/include-fixed'
3019 # Someone might think of using the pre-installed headers on
3020 # Canadian crosses, in case the installed compiler is not fully
3021 # compatible with the compiler being built. In this case, it
3022 # would be better to flag an error than risking having
3023 # incompatible object files being constructed. We can't
3024 # guarantee that an error will be flagged, but let's hope the
3025 # compiler will do it, when presented with incompatible header
3030 case "${target}-${is_cross_compiler}" in
3031 i[[3456789]]86-*-linux*-no)
3032 # Here host == target, so we don't need to build gcc,
3033 # so we don't want to discard standard headers.
3034 FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
3037 # If we're building newlib, use its generic headers last, but search
3038 # for any libc-related directories first (so make it the last -B
3040 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
3042 # If we're building libgloss, find the startup file, simulator library
3043 # and linker script.
3044 case " $target_configdirs " in
3046 # Look for startup file, simulator library and maybe linker script.
3047 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir"
3048 # Look for libnosys.a in case the target needs it.
3049 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
3050 # Most targets have the linker script in the source directory.
3051 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir"
3062 x86_64-*mingw* | *-w64-mingw*)
3063 # MinGW-w64 does not use newlib, nor does it use winsup. It may,
3064 # however, use a symlink named 'mingw' in ${prefix} .
3065 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L${prefix}/${target}/lib -L${prefix}/mingw/lib -isystem ${prefix}/${target}/include -isystem ${prefix}/mingw/include'
3068 # MinGW can't be handled as Cygwin above since it does not use newlib.
3069 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include'
3073 # Allow the user to override the flags for
3074 # our build compiler if desired.
3075 if test x"${build}" = x"${host}" ; then
3076 CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
3077 CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
3078 LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
3081 # On Canadian crosses, we'll be searching the right directories for
3082 # the previously-installed cross compiler, so don't bother to add
3083 # flags for directories within the install tree of the compiler
3084 # being built; programs in there won't even run.
3085 if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
3086 # Search for pre-installed headers if nothing else fits.
3087 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
3090 if test "x${use_gnu_ld}" = x &&
3091 echo " ${configdirs} " | grep " ld " > /dev/null ; then
3092 # Arrange for us to find uninstalled linker scripts.
3093 FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
3096 # Search for other target-specific linker scripts and such.
3099 FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
3103 # Makefile fragments.
3104 for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
3106 eval fragval=\$$frag
3107 if test $fragval != /dev/null; then
3108 eval $frag=${srcdir}/$fragval
3111 AC_SUBST_FILE(host_makefile_frag)
3112 AC_SUBST_FILE(target_makefile_frag)
3113 AC_SUBST_FILE(alphaieee_frag)
3114 AC_SUBST_FILE(ospace_frag)
3116 # Miscellanea: directories, flags, etc.
3117 AC_SUBST(RPATH_ENVVAR)
3118 AC_SUBST(GCC_SHLIB_SUBDIR)
3120 AC_SUBST(build_tooldir)
3121 AC_SUBST(CONFIGURE_GDB_TK)
3123 AC_SUBST(INSTALL_GDB_TK)
3125 # Build module lists & subconfigure args.
3126 AC_SUBST(build_configargs)
3127 AC_SUBST(build_configdirs)
3129 # Host module lists & subconfigure args.
3130 AC_SUBST(host_configargs)
3131 AC_SUBST(configdirs)
3132 AC_SUBST(target_configdirs)
3134 # Target module lists & subconfigure args.
3135 AC_SUBST(target_configargs)
3139 AC_SUBST(AR_FOR_BUILD)
3140 AC_SUBST(AS_FOR_BUILD)
3141 AC_SUBST(CC_FOR_BUILD)
3142 AC_SUBST(CFLAGS_FOR_BUILD)
3143 AC_SUBST(CXXFLAGS_FOR_BUILD)
3144 AC_SUBST(CXX_FOR_BUILD)
3145 AC_SUBST(DLLTOOL_FOR_BUILD)
3146 AC_SUBST(GCJ_FOR_BUILD)
3147 AC_SUBST(GFORTRAN_FOR_BUILD)
3148 AC_SUBST(GOC_FOR_BUILD)
3149 AC_SUBST(LDFLAGS_FOR_BUILD)
3150 AC_SUBST(LD_FOR_BUILD)
3151 AC_SUBST(NM_FOR_BUILD)
3152 AC_SUBST(RANLIB_FOR_BUILD)
3153 AC_SUBST(WINDMC_FOR_BUILD)
3154 AC_SUBST(WINDRES_FOR_BUILD)
3156 # Generate default definitions for YACC, M4, LEX and other programs that run
3157 # on the build machine. These are used if the Makefile can't locate these
3158 # programs in objdir.
3159 MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
3161 AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
3162 case " $build_configdirs " in
3163 *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
3166 AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
3167 case " $build_configdirs " in
3168 *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
3171 AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4])
3172 case " $build_configdirs " in
3173 *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
3176 AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex])
3177 case " $build_configdirs " in
3178 *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
3179 *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
3182 AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex])
3183 case " $build_configdirs " in
3184 *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
3187 AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo])
3188 case " $build_configdirs " in
3189 *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
3192 # For an installed makeinfo, we require it to be from texinfo 4.7 or
3193 # higher, else we use the "missing" dummy.
3194 if ${MAKEINFO} --version \
3195 | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
3198 MAKEINFO="$MISSING makeinfo"
3204 # FIXME: expect and dejagnu may become build tools?
3206 AC_CHECK_PROGS(EXPECT, expect, expect)
3207 case " $configdirs " in
3209 test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
3213 AC_CHECK_PROGS(RUNTEST, runtest, runtest)
3214 case " $configdirs " in
3216 test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
3222 NCN_STRICT_CHECK_TOOLS(AR, ar)
3223 NCN_STRICT_CHECK_TOOLS(AS, as)
3224 NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool)
3225 NCN_STRICT_CHECK_TOOLS(LD, ld)
3226 NCN_STRICT_CHECK_TOOLS(LIPO, lipo)
3227 NCN_STRICT_CHECK_TOOLS(NM, nm)
3228 NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, true)
3229 NCN_STRICT_CHECK_TOOLS(STRIP, strip, true)
3230 NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
3231 NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
3232 NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
3233 NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
3234 NCN_STRICT_CHECK_TOOLS(READELF, readelf)
3241 AC_ARG_WITH([build-time-tools],
3242 [AS_HELP_STRING([--with-build-time-tools=PATH],
3243 [use given path to find target tools during the build])],
3244 [case x"$withval" in
3247 with_build_time_tools=
3248 AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path])
3251 [with_build_time_tools=])
3253 NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
3254 NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx)
3255 NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
3256 NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
3257 NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
3258 NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
3260 ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
3261 ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
3262 ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
3263 ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld)
3264 ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
3265 ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
3266 ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
3267 ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
3268 ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
3269 ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
3270 ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
3271 ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc)
3273 RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
3275 GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
3276 GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
3277 GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
3278 dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
3279 GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
3280 [gcc/xg++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
3282 GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
3283 [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
3285 GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool])
3286 GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
3287 GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ,
3288 [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java)
3289 GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN,
3290 [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
3291 GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC,
3292 [gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go)
3293 GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
3294 GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
3295 GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
3296 GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
3297 GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
3298 GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
3299 GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
3300 GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
3301 GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
3303 AC_SUBST(FLAGS_FOR_TARGET)
3304 AC_SUBST(RAW_CXX_FOR_TARGET)
3306 # Certain tools may need extra flags.
3307 AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
3308 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
3309 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
3311 # When building target libraries, except in a Canadian cross, we use
3312 # the same toolchain as the compiler we just built.
3313 COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
3314 COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
3315 COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
3316 if test $host = $build; then
3317 case " $configdirs " in
3319 COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
3320 COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
3321 COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
3326 AC_SUBST(COMPILER_AS_FOR_TARGET)
3327 AC_SUBST(COMPILER_LD_FOR_TARGET)
3328 AC_SUBST(COMPILER_NM_FOR_TARGET)
3330 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
3331 AC_ARG_ENABLE(maintainer-mode,
3332 [AS_HELP_STRING([--enable-maintainer-mode],
3333 [enable make rules and dependencies not useful
3334 (and sometimes confusing) to the casual installer])],
3335 USE_MAINTAINER_MODE=$enableval,
3336 USE_MAINTAINER_MODE=no)
3337 AC_MSG_RESULT($USE_MAINTAINER_MODE)
3338 AC_SUBST(MAINTAINER_MODE_TRUE)
3339 AC_SUBST(MAINTAINER_MODE_FALSE)
3340 if test "$USE_MAINTAINER_MODE" = yes; then
3341 MAINTAINER_MODE_TRUE=
3342 MAINTAINER_MODE_FALSE='#'
3344 MAINTAINER_MODE_TRUE='#'
3345 MAINTAINER_MODE_FALSE=
3347 MAINT=$MAINTAINER_MODE_TRUE
3350 # ---------------------
3351 # GCC bootstrap support
3352 # ---------------------
3354 # Stage specific cflags for build.
3359 yes) stage1_cflags="-g -Wa,-J" ;;
3360 *) stage1_cflags="-g -J" ;;
3364 AC_SUBST(stage1_cflags)
3366 # Enable --enable-checking in stage1 of the compiler.
3367 AC_ARG_ENABLE(stage1-checking,
3368 [AS_HELP_STRING([[--enable-stage1-checking[=all]]],
3369 [choose additional checking for stage1 of the compiler])],
3370 [stage1_checking=--enable-checking=${enable_stage1_checking}],
3371 [if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
3372 stage1_checking=--enable-checking=yes,types
3374 stage1_checking=--enable-checking=$enable_checking,types
3376 AC_SUBST(stage1_checking)
3378 # Enable -Werror in bootstrap stage2 and later.
3379 AC_ARG_ENABLE(werror,
3380 [AS_HELP_STRING([--enable-werror],
3381 [enable -Werror in bootstrap stage2 and later])], [],
3382 [if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
3387 case ${enable_werror} in
3388 yes) stage2_werror_flag="--enable-werror-always" ;;
3389 *) stage2_werror_flag="" ;;
3391 AC_SUBST(stage2_werror_flag)
3393 # Enable --enable-host-shared.
3394 AC_ARG_ENABLE(host-shared,
3395 [AS_HELP_STRING([--enable-host-shared],
3396 [build host code as shared libraries])],
3397 [host_shared=$enableval], [host_shared=no])
3398 AC_SUBST(host_shared)
3400 # Specify what files to not compare during bootstrap.
3402 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
3404 hppa*64*-*-hpux*) ;;
3405 hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
3406 powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
3408 AC_SUBST(compare_exclusions)
3410 AC_CONFIG_FILES([Makefile],
3411 [sed "$extrasub_build" Makefile |
3412 sed "$extrasub_host" |
3413 sed "$extrasub_target" > mf$$
3414 mv -f mf$$ Makefile],
3415 [extrasub_build="$extrasub_build"
3416 extrasub_host="$extrasub_host"
3417 extrasub_target="$extrasub_target"])