# darwin 5.x (macOS 10.1) onwards we only need to adjust when the
# deployment target is forced to an earlier version.
case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host in
- UNSET,*-darwin[[89]]*|UNSET,*-darwin[[12]][[0123456789]]*)
+ UNSET,*-darwin[[89]]*|UNSET,*-darwin[[12]][[0-9]]*)
;;
10.[[012]][[,.]]*)
_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+
+ # Publish an arg to allow the user to select that Darwin host (and target)
+ # libraries should be given install-names like @rpath/libfoo.dylib. This
+ # requires that the user of the library then adds an 'rpath' to the DSO that
+ # needs access.
+ # NOTE: there are defaults below, for systems that support rpaths. The person
+ # configuring can override the defaults for any system version that supports
+ # them - they are, however, forced off for system versions without support.
+ AC_ARG_ENABLE([darwin-at-rpath],
+ AS_HELP_STRING([--enable-darwin-at-rpath],
+ [install libraries with @rpath/library-name, requires rpaths to be added to executables]),
+ [if test "x$enable_darwin_at_rpath" = "xyes"; then
+ # This is not supported before macOS 10.5 / Darwin9.
+ case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
+ UNSET,darwin[[4-8]]*|UNSET,rhapsody*|10.[[0-4]][[,.]]*)
+ AC_MSG_WARN([Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)])
+ enable_darwin_at_rpath=no
+ ;;
+ esac
+ fi],
+ [case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in
+ # As above, before 10.5 / Darwin9 this does not work.
+ UNSET,darwin[[4-8]]*|UNSET,rhapsody*|10.[[0-4]][[,.]]*)
+ enable_darwin_at_rpath=no
+ ;;
+
+ # We cannot build and test reliably on macOS 10.11+ (Darwin15+) without use
+ # of rpaths, since runpaths set via DYLD_LIBRARY_PATH are elided by key
+ # system executables (e.g. /bin/sh). Force rpaths on for these systems.
+ UNSET,darwin1[[5-9]]*|UNSET,darwin2*|10.1[[1-9]][[,.]]*|1[[1-9]].*[[,.]]* )
+ AC_MSG_NOTICE([@rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)])
+ enable_darwin_at_rpath=yes
+ ;;
+ # NOTE: we are not (yet) doing anything for 10.5 .. 10.10, since they can
+ # work with either DYLD_LIBRARY_PATH or embedded rpaths.
+
+ esac
+ ])
+
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
esac
if test "$_lt_dar_can_shared" = "yes"; then
output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _lt_install_name='\$rpath/\$soname'
+ if test "x$enable_darwin_at_rpath" = "xyes"; then
+ _lt_install_name='@rpath/\$soname'
+ fi
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dsymutil}"
_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dar_export_syms}${_lt_dsymutil}"
_LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
m4_if([$1], [CXX],
[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _lt_install_name='\$rpath/\$soname'
+ if test "x$enable_darwin_at_rpath" = "xyes"; then
+ _lt_install_name='@rpath/\$soname'
+ fi
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring${_lt_dsymutil}"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
fi
],[])
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
+[plugin_option=
+plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
+for plugin in $plugin_names; do
+ plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
+ if test x$plugin_so = x$plugin; then
+ plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
+ fi
+ if test x$plugin_so != x$plugin; then
+ plugin_option="--plugin $plugin_so"
+ break
+ fi
+done
+
+AC_CHECK_TOOL(AR, ar, false)
test -z "$AR" && AR=ar
+if test -n "$plugin_option"; then
+ if $AR --help 2>&1 | grep -q "\--plugin"; then
+ touch conftest.c
+ $AR $plugin_option rc conftest.a conftest.c
+ if test "$?" != 0; then
+ AC_MSG_WARN([Failed: $AR $plugin_option rc])
+ else
+ AR="$AR $plugin_option"
+ fi
+ rm -f conftest.*
+ fi
+fi
test -z "$AR_FLAGS" && AR_FLAGS=cru
_LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1])
AC_CHECK_TOOL(RANLIB, ranlib, :)
test -z "$RANLIB" && RANLIB=:
+if test -n "$plugin_option" && test "$RANLIB" != ":"; then
+ if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+ RANLIB="$RANLIB $plugin_option"
+ fi
+fi
_LT_DECL([], [RANLIB], [1],
[Commands used to install an old-style archive])
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=yes
- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
shlibpath_var=LD_LIBRARY_PATH
;;
+# Shared libraries for VwWorks, >= 7 only at this stage
+# and (fpic) still incompatible with "large" code models
+# in a few configurations. Only for RTP mode in any case,
+# and upon explicit request at configure time.
+vxworks7*)
+ dynamic_linker=no
+ case ${with_multisubdir}-${enable_shared} in
+ *large*)
+ ;;
+ *mrtp*-yes)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker="$host_os module_loader"
+ ;;
+ esac
+ ;;
*)
dynamic_linker=no
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+vxworks*)
+ # Assume VxWorks cross toolchains are built on Linux, possibly
+ # as canadian for Windows hosts.
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
file_magic_cmd=$lt_cv_file_magic_cmd
# LT_PATH_NM
# ----------
-# find the pathname to a BSD- or MS-compatible name lister
+# find the pathname to a BSD- or MS-compatible name lister, and any flags
+# needed to make it compatible
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- : ${lt_cv_path_NM=no}
-fi])
+ # Let the user override the nm to test.
+ lt_nm_to_check="$NM"
+ else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ fi
+ for lt_tmp_nm in "$lt_nm_to_check"; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ # Strip out any user-provided options from the nm to test twice,
+ # the first time to test to see if nm (rather than its options) has
+ # an explicit path, the second time to yield a file which can be
+ # nm'ed itself.
+ tmp_nm_path="`$ECHO "$lt_tmp_nm" | sed 's, -.*$,,'`"
+ case "$tmp_nm_path" in
+ */*|*\\*) tmp_nm="$lt_tmp_nm";;
+ *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+ esac
+ tmp_nm_to_nm="`$ECHO "$tmp_nm" | sed 's, -.*$,,'`"
+ if test -f "$tmp_nm_to_nm" || test -f "$tmp_nm_to_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ case `"$tmp_nm" -B "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+ *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+ *$tmp_nm*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}])
if test "$lt_cv_path_NM" != "no"; then
NM="$lt_cv_path_NM"
else
symcode='[[BCDEGQRST]]'
;;
solaris*)
- symcode='[[BDRT]]'
+ symcode='[[BCDRT]]'
;;
sco3.2v5*)
symcode='[[DT]]'
;;
vxworks*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
+ # For VxWorks ports, we assume the use of a GNU linker with
+ # standard elf conventions.
+ _LT_TAGVAR(ld_shlibs, $1)=yes
;;
*)
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
-
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
projects / thirdparty / gcc.git / blobdiff