1 #ifndef __LINUX_NL80211_H
2 #define __LINUX_NL80211_H
4 * 802.11 netlink interface public header
6 * Copyright 2006, 2007, 2008 Johannes Berg <johannes@sipsolutions.net>
7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
9 * Copyright 2008 Michael Buesch <mb@bu3sch.de>
10 * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
12 * Copyright 2008 Colin McCabe <colin@cozybit.com>
14 * Permission to use, copy, modify, and/or distribute this software for any
15 * purpose with or without fee is hereby granted, provided that the above
16 * copyright notice and this permission notice appear in all copies.
18 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
19 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
20 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
21 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
22 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
23 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
24 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
29 * DOC: Station handling
31 * Stations are added per interface, but a special case exists with VLAN
32 * interfaces. When a station is bound to an AP interface, it may be moved
33 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
34 * The station is still assumed to belong to the AP interface it was added
37 * TODO: need more info?
41 * enum nl80211_commands - supported nl80211 commands
43 * @NL80211_CMD_UNSPEC: unspecified command to catch errors
45 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
46 * to get a list of all present wiphys.
47 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
48 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
49 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
50 * %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
51 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
52 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
53 * %NL80211_ATTR_WIPHY_NAME.
54 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
55 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
57 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
58 * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
59 * on an %NL80211_ATTR_IFINDEX is supported.
60 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
61 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
62 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
63 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
64 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
65 * be sent from userspace to request creation of a new virtual interface,
66 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
67 * %NL80211_ATTR_IFNAME.
68 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
69 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
70 * userspace to request deletion of a virtual interface, then requires
71 * attribute %NL80211_ATTR_IFINDEX.
73 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
74 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
75 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
76 * %NL80211_ATTR_KEY_THRESHOLD.
77 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
78 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
80 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
81 * or %NL80211_ATTR_MAC.
83 * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
84 * %NL80222_CMD_NEW_BEACON message)
85 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
86 * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
87 * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
88 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
89 * parameters are like for %NL80211_CMD_SET_BEACON.
90 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
92 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
93 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
94 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
95 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
96 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
97 * the interface identified by %NL80211_ATTR_IFINDEX.
98 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
99 * or, if no MAC address given, all stations, on the interface identified
100 * by %NL80211_ATTR_IFINDEX.
102 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
103 * destination %NL80211_ATTR_MAC on the interface identified by
104 * %NL80211_ATTR_IFINDEX.
105 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
106 * destination %NL80211_ATTR_MAC on the interface identified by
107 * %NL80211_ATTR_IFINDEX.
108 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
109 * the interface identified by %NL80211_ATTR_IFINDEX.
110 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
111 * or, if no MAC address given, all mesh paths, on the interface identified
112 * by %NL80211_ATTR_IFINDEX.
113 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
114 * %NL80211_ATTR_IFINDEX.
116 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
117 * after being queried by the kernel. CRDA replies by sending a regulatory
118 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
119 * current alpha2 if it found a match. It also provides
120 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
121 * regulatory rule is a nested set of attributes given by
122 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
123 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
124 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
125 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
126 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
127 * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
128 * store this as a valid request and then query userspace for it.
130 * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
131 * interface identified by %NL80211_ATTR_IFINDEX
133 * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
134 * interface identified by %NL80211_ATTR_IFINDEX
136 * @NL80211_CMD_GET_SCAN: get scan results
137 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
138 * @NL80211_CMD_NEW_SCAN: scan notification (as a reply to NL80211_CMD_GET_SCAN
139 * and on the "scan" multicast group)
141 * @NL80211_CMD_MAX: highest used command number
142 * @__NL80211_CMD_AFTER_LAST: internal use
144 enum nl80211_commands
{
145 /* don't change the order or add anything inbetween, this is ABI! */
148 NL80211_CMD_GET_WIPHY
, /* can dump */
149 NL80211_CMD_SET_WIPHY
,
150 NL80211_CMD_NEW_WIPHY
,
151 NL80211_CMD_DEL_WIPHY
,
153 NL80211_CMD_GET_INTERFACE
, /* can dump */
154 NL80211_CMD_SET_INTERFACE
,
155 NL80211_CMD_NEW_INTERFACE
,
156 NL80211_CMD_DEL_INTERFACE
,
163 NL80211_CMD_GET_BEACON
,
164 NL80211_CMD_SET_BEACON
,
165 NL80211_CMD_NEW_BEACON
,
166 NL80211_CMD_DEL_BEACON
,
168 NL80211_CMD_GET_STATION
,
169 NL80211_CMD_SET_STATION
,
170 NL80211_CMD_NEW_STATION
,
171 NL80211_CMD_DEL_STATION
,
173 NL80211_CMD_GET_MPATH
,
174 NL80211_CMD_SET_MPATH
,
175 NL80211_CMD_NEW_MPATH
,
176 NL80211_CMD_DEL_MPATH
,
181 NL80211_CMD_REQ_SET_REG
,
183 NL80211_CMD_GET_MESH_PARAMS
,
184 NL80211_CMD_SET_MESH_PARAMS
,
186 NL80211_CMD_GET_SCAN
,
187 NL80211_CMD_TRIGGER_SCAN
,
188 NL80211_CMD_NEW_SCAN
,
190 /* add new commands above here */
192 /* used to define NL80211_CMD_MAX below */
193 __NL80211_CMD_AFTER_LAST
,
194 NL80211_CMD_MAX
= __NL80211_CMD_AFTER_LAST
- 1
198 * Allow user space programs to use #ifdef on new commands by defining them
201 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
204 * enum nl80211_attrs - nl80211 netlink attributes
206 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
208 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
209 * /sys/class/ieee80211/<phyname>/index
210 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
211 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
212 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
213 * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ
214 * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
215 * NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including
217 * NL80211_SEC_CHAN_DISABLED = HT20 only
218 * NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel
219 * NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel
221 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
222 * @NL80211_ATTR_IFNAME: network interface name
223 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
225 * @NL80211_ATTR_MAC: MAC address (various uses)
227 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
228 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
230 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
231 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
232 * section 7.3.2.25.1, e.g. 0x000FAC04)
233 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
234 * CCMP keys, each six bytes in little endian
236 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
237 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
238 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
239 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
241 * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
242 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
243 * &enum nl80211_sta_flags.
244 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
245 * IEEE 802.11 7.3.1.6 (u16).
246 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
247 * rates as defined by IEEE 802.11 7.3.2.2 but without the length
248 * restriction (at most %NL80211_MAX_SUPP_RATES).
249 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
250 * to, or the AP interface the station was originally added to to.
251 * @NL80211_ATTR_STA_INFO: information about a station, part of station info
252 * given for %NL80211_CMD_GET_STATION, nested attribute containing
253 * info as possible, see &enum nl80211_sta_info.
255 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
256 * consisting of a nested array.
258 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
259 * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
260 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
261 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
262 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
263 * &enum nl80211_mpath_info.
265 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
266 * &enum nl80211_mntr_flags.
268 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
269 * current regulatory domain should be set to or is already set to.
270 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
271 * to query the CRDA to retrieve one regulatory domain. This attribute can
272 * also be used by userspace to query the kernel for the currently set
273 * regulatory domain. We chose an alpha2 as that is also used by the
274 * IEEE-802.11d country information element to identify a country.
275 * Users can also simply ask the wireless core to set regulatory domain
276 * to a specific alpha2.
277 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
280 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
281 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
283 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
285 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
286 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
287 * restriction (at most %NL80211_MAX_SUPP_RATES).
289 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
290 * association request when used with NL80211_CMD_NEW_STATION)
292 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
293 * supported interface types, each a flag attribute with the number
294 * of the interface mode.
296 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
297 * a single scan request, a wiphy attribute.
299 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies
300 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs
301 * @NL80211_ATTR_BSS: scan result BSS
303 * @NL80211_ATTR_MAX: highest attribute number currently defined
304 * @__NL80211_ATTR_AFTER_LAST: internal use
307 /* don't change the order or add anything inbetween, this is ABI! */
311 NL80211_ATTR_WIPHY_NAME
,
313 NL80211_ATTR_IFINDEX
,
319 NL80211_ATTR_KEY_DATA
,
320 NL80211_ATTR_KEY_IDX
,
321 NL80211_ATTR_KEY_CIPHER
,
322 NL80211_ATTR_KEY_SEQ
,
323 NL80211_ATTR_KEY_DEFAULT
,
325 NL80211_ATTR_BEACON_INTERVAL
,
326 NL80211_ATTR_DTIM_PERIOD
,
327 NL80211_ATTR_BEACON_HEAD
,
328 NL80211_ATTR_BEACON_TAIL
,
330 NL80211_ATTR_STA_AID
,
331 NL80211_ATTR_STA_FLAGS
,
332 NL80211_ATTR_STA_LISTEN_INTERVAL
,
333 NL80211_ATTR_STA_SUPPORTED_RATES
,
334 NL80211_ATTR_STA_VLAN
,
335 NL80211_ATTR_STA_INFO
,
337 NL80211_ATTR_WIPHY_BANDS
,
339 NL80211_ATTR_MNTR_FLAGS
,
341 NL80211_ATTR_MESH_ID
,
342 NL80211_ATTR_STA_PLINK_ACTION
,
343 NL80211_ATTR_MPATH_NEXT_HOP
,
344 NL80211_ATTR_MPATH_INFO
,
346 NL80211_ATTR_BSS_CTS_PROT
,
347 NL80211_ATTR_BSS_SHORT_PREAMBLE
,
348 NL80211_ATTR_BSS_SHORT_SLOT_TIME
,
350 NL80211_ATTR_HT_CAPABILITY
,
352 NL80211_ATTR_SUPPORTED_IFTYPES
,
354 NL80211_ATTR_REG_ALPHA2
,
355 NL80211_ATTR_REG_RULES
,
357 NL80211_ATTR_MESH_PARAMS
,
359 NL80211_ATTR_BSS_BASIC_RATES
,
361 NL80211_ATTR_WIPHY_TXQ_PARAMS
,
362 NL80211_ATTR_WIPHY_FREQ
,
363 NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
,
365 NL80211_ATTR_MAX_NUM_SCAN_SSIDS
,
367 NL80211_ATTR_SCAN_FREQUENCIES
,
368 NL80211_ATTR_SCAN_SSIDS
,
369 NL80211_ATTR_SCAN_GENERATION
,
372 /* add attributes here, update the policy in nl80211.c */
374 __NL80211_ATTR_AFTER_LAST
,
375 NL80211_ATTR_MAX
= __NL80211_ATTR_AFTER_LAST
- 1
379 * Allow user space programs to use #ifdef on new attributes by defining them
382 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
383 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
384 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
385 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
386 #define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
388 #define NL80211_MAX_SUPP_RATES 32
389 #define NL80211_MAX_SUPP_REG_RULES 32
390 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
391 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
392 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
393 #define NL80211_HT_CAPABILITY_LEN 26
396 * enum nl80211_iftype - (virtual) interface types
398 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
399 * @NL80211_IFTYPE_ADHOC: independent BSS member
400 * @NL80211_IFTYPE_STATION: managed BSS member
401 * @NL80211_IFTYPE_AP: access point
402 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
403 * @NL80211_IFTYPE_WDS: wireless distribution interface
404 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
405 * @NL80211_IFTYPE_MESH_POINT: mesh point
406 * @NL80211_IFTYPE_MAX: highest interface type number currently defined
407 * @__NL80211_IFTYPE_AFTER_LAST: internal use
409 * These values are used with the %NL80211_ATTR_IFTYPE
410 * to set the type of an interface.
413 enum nl80211_iftype
{
414 NL80211_IFTYPE_UNSPECIFIED
,
415 NL80211_IFTYPE_ADHOC
,
416 NL80211_IFTYPE_STATION
,
418 NL80211_IFTYPE_AP_VLAN
,
420 NL80211_IFTYPE_MONITOR
,
421 NL80211_IFTYPE_MESH_POINT
,
424 __NL80211_IFTYPE_AFTER_LAST
,
425 NL80211_IFTYPE_MAX
= __NL80211_IFTYPE_AFTER_LAST
- 1
429 * enum nl80211_sta_flags - station flags
431 * Station flags. When a station is added to an AP interface, it is
432 * assumed to be already associated (and hence authenticated.)
434 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
435 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
436 * with short barker preamble
437 * @NL80211_STA_FLAG_WME: station is WME/QoS capable
439 enum nl80211_sta_flags
{
440 __NL80211_STA_FLAG_INVALID
,
441 NL80211_STA_FLAG_AUTHORIZED
,
442 NL80211_STA_FLAG_SHORT_PREAMBLE
,
443 NL80211_STA_FLAG_WME
,
446 __NL80211_STA_FLAG_AFTER_LAST
,
447 NL80211_STA_FLAG_MAX
= __NL80211_STA_FLAG_AFTER_LAST
- 1
451 * enum nl80211_sta_info - station information
453 * These attribute types are used with %NL80211_ATTR_STA_INFO
454 * when getting information about a station.
456 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
457 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
458 * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
459 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
460 * @__NL80211_STA_INFO_AFTER_LAST: internal
461 * @NL80211_STA_INFO_MAX: highest possible station info attribute
463 enum nl80211_sta_info
{
464 __NL80211_STA_INFO_INVALID
,
465 NL80211_STA_INFO_INACTIVE_TIME
,
466 NL80211_STA_INFO_RX_BYTES
,
467 NL80211_STA_INFO_TX_BYTES
,
468 NL80211_STA_INFO_LLID
,
469 NL80211_STA_INFO_PLID
,
470 NL80211_STA_INFO_PLINK_STATE
,
473 __NL80211_STA_INFO_AFTER_LAST
,
474 NL80211_STA_INFO_MAX
= __NL80211_STA_INFO_AFTER_LAST
- 1
478 * enum nl80211_mpath_flags - nl80211 mesh path flags
480 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
481 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
482 * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
483 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
484 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
486 enum nl80211_mpath_flags
{
487 NL80211_MPATH_FLAG_ACTIVE
= 1<<0,
488 NL80211_MPATH_FLAG_RESOLVING
= 1<<1,
489 NL80211_MPATH_FLAG_DSN_VALID
= 1<<2,
490 NL80211_MPATH_FLAG_FIXED
= 1<<3,
491 NL80211_MPATH_FLAG_RESOLVED
= 1<<4,
495 * enum nl80211_mpath_info - mesh path information
497 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
498 * information about a mesh path.
500 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
501 * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
502 * @NL80211_ATTR_MPATH_DSN: destination sequence number
503 * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
504 * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
505 * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
506 * &enum nl80211_mpath_flags;
507 * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
508 * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
510 enum nl80211_mpath_info
{
511 __NL80211_MPATH_INFO_INVALID
,
512 NL80211_MPATH_INFO_FRAME_QLEN
,
513 NL80211_MPATH_INFO_DSN
,
514 NL80211_MPATH_INFO_METRIC
,
515 NL80211_MPATH_INFO_EXPTIME
,
516 NL80211_MPATH_INFO_FLAGS
,
517 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT
,
518 NL80211_MPATH_INFO_DISCOVERY_RETRIES
,
521 __NL80211_MPATH_INFO_AFTER_LAST
,
522 NL80211_MPATH_INFO_MAX
= __NL80211_MPATH_INFO_AFTER_LAST
- 1
526 * enum nl80211_band_attr - band attributes
527 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
528 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
529 * an array of nested frequency attributes
530 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
531 * an array of nested bitrate attributes
532 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
534 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
535 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
536 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
538 enum nl80211_band_attr
{
539 __NL80211_BAND_ATTR_INVALID
,
540 NL80211_BAND_ATTR_FREQS
,
541 NL80211_BAND_ATTR_RATES
,
543 NL80211_BAND_ATTR_HT_MCS_SET
,
544 NL80211_BAND_ATTR_HT_CAPA
,
545 NL80211_BAND_ATTR_HT_AMPDU_FACTOR
,
546 NL80211_BAND_ATTR_HT_AMPDU_DENSITY
,
549 __NL80211_BAND_ATTR_AFTER_LAST
,
550 NL80211_BAND_ATTR_MAX
= __NL80211_BAND_ATTR_AFTER_LAST
- 1
553 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
556 * enum nl80211_frequency_attr - frequency attributes
557 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
558 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
560 * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
561 * permitted on this channel in current regulatory domain.
562 * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
563 * on this channel in current regulatory domain.
564 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
565 * on this channel in current regulatory domain.
566 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
569 enum nl80211_frequency_attr
{
570 __NL80211_FREQUENCY_ATTR_INVALID
,
571 NL80211_FREQUENCY_ATTR_FREQ
,
572 NL80211_FREQUENCY_ATTR_DISABLED
,
573 NL80211_FREQUENCY_ATTR_PASSIVE_SCAN
,
574 NL80211_FREQUENCY_ATTR_NO_IBSS
,
575 NL80211_FREQUENCY_ATTR_RADAR
,
576 NL80211_FREQUENCY_ATTR_MAX_TX_POWER
,
579 __NL80211_FREQUENCY_ATTR_AFTER_LAST
,
580 NL80211_FREQUENCY_ATTR_MAX
= __NL80211_FREQUENCY_ATTR_AFTER_LAST
- 1
583 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
586 * enum nl80211_bitrate_attr - bitrate attributes
587 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
588 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
591 enum nl80211_bitrate_attr
{
592 __NL80211_BITRATE_ATTR_INVALID
,
593 NL80211_BITRATE_ATTR_RATE
,
594 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE
,
597 __NL80211_BITRATE_ATTR_AFTER_LAST
,
598 NL80211_BITRATE_ATTR_MAX
= __NL80211_BITRATE_ATTR_AFTER_LAST
- 1
602 * enum nl80211_reg_rule_attr - regulatory rule attributes
603 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
604 * considerations for a given frequency range. These are the
605 * &enum nl80211_reg_rule_flags.
606 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
607 * rule in KHz. This is not a center of frequency but an actual regulatory
609 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
610 * in KHz. This is not a center a frequency but an actual regulatory
612 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
613 * frequency range, in KHz.
614 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
615 * for a given frequency range. The value is in mBi (100 * dBi).
616 * If you don't have one then don't send this.
617 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
618 * a given frequency range. The value is in mBm (100 * dBm).
620 enum nl80211_reg_rule_attr
{
621 __NL80211_REG_RULE_ATTR_INVALID
,
622 NL80211_ATTR_REG_RULE_FLAGS
,
624 NL80211_ATTR_FREQ_RANGE_START
,
625 NL80211_ATTR_FREQ_RANGE_END
,
626 NL80211_ATTR_FREQ_RANGE_MAX_BW
,
628 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN
,
629 NL80211_ATTR_POWER_RULE_MAX_EIRP
,
632 __NL80211_REG_RULE_ATTR_AFTER_LAST
,
633 NL80211_REG_RULE_ATTR_MAX
= __NL80211_REG_RULE_ATTR_AFTER_LAST
- 1
637 * enum nl80211_reg_rule_flags - regulatory rule flags
639 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
640 * @NL80211_RRF_NO_CCK: CCK modulation not allowed
641 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
642 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
643 * @NL80211_RRF_DFS: DFS support is required to be used
644 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
645 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
646 * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
647 * @NL80211_RRF_NO_IBSS: no IBSS is allowed
649 enum nl80211_reg_rule_flags
{
650 NL80211_RRF_NO_OFDM
= 1<<0,
651 NL80211_RRF_NO_CCK
= 1<<1,
652 NL80211_RRF_NO_INDOOR
= 1<<2,
653 NL80211_RRF_NO_OUTDOOR
= 1<<3,
654 NL80211_RRF_DFS
= 1<<4,
655 NL80211_RRF_PTP_ONLY
= 1<<5,
656 NL80211_RRF_PTMP_ONLY
= 1<<6,
657 NL80211_RRF_PASSIVE_SCAN
= 1<<7,
658 NL80211_RRF_NO_IBSS
= 1<<8,
662 * enum nl80211_mntr_flags - monitor configuration flags
664 * Monitor configuration flags.
666 * @__NL80211_MNTR_FLAG_INVALID: reserved
668 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
669 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
670 * @NL80211_MNTR_FLAG_CONTROL: pass control frames
671 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
672 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
673 * overrides all other flags.
675 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
676 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
678 enum nl80211_mntr_flags
{
679 __NL80211_MNTR_FLAG_INVALID
,
680 NL80211_MNTR_FLAG_FCSFAIL
,
681 NL80211_MNTR_FLAG_PLCPFAIL
,
682 NL80211_MNTR_FLAG_CONTROL
,
683 NL80211_MNTR_FLAG_OTHER_BSS
,
684 NL80211_MNTR_FLAG_COOK_FRAMES
,
687 __NL80211_MNTR_FLAG_AFTER_LAST
,
688 NL80211_MNTR_FLAG_MAX
= __NL80211_MNTR_FLAG_AFTER_LAST
- 1
692 * enum nl80211_meshconf_params - mesh configuration parameters
694 * Mesh configuration parameters
696 * @__NL80211_MESHCONF_INVALID: internal use
698 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
699 * millisecond units, used by the Peer Link Open message
701 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
702 * millisecond units, used by the peer link management to close a peer link
704 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
707 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
708 * on this mesh interface
710 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
711 * open retries that can be sent to establish a new peer link instance in a
714 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
717 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
718 * open peer links when we detect compatible mesh peers.
720 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
721 * containing a PREQ that an MP can send to a particular destination (path
724 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
727 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
728 * until giving up on a path discovery (in milliseconds)
730 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
731 * points receiving a PREQ shall consider the forwarding information from the
732 * root to be valid. (TU = time unit)
734 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
735 * TUs) during which an MP can send only one action frame containing a PREQ
738 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
739 * that it takes for an HWMP information element to propagate across the mesh
741 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
743 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
745 enum nl80211_meshconf_params
{
746 __NL80211_MESHCONF_INVALID
,
747 NL80211_MESHCONF_RETRY_TIMEOUT
,
748 NL80211_MESHCONF_CONFIRM_TIMEOUT
,
749 NL80211_MESHCONF_HOLDING_TIMEOUT
,
750 NL80211_MESHCONF_MAX_PEER_LINKS
,
751 NL80211_MESHCONF_MAX_RETRIES
,
752 NL80211_MESHCONF_TTL
,
753 NL80211_MESHCONF_AUTO_OPEN_PLINKS
,
754 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES
,
755 NL80211_MESHCONF_PATH_REFRESH_TIME
,
756 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT
,
757 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT
,
758 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL
,
759 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME
,
762 __NL80211_MESHCONF_ATTR_AFTER_LAST
,
763 NL80211_MESHCONF_ATTR_MAX
= __NL80211_MESHCONF_ATTR_AFTER_LAST
- 1
767 * enum nl80211_txq_attr - TX queue parameter attributes
768 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
769 * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
770 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
772 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
773 * 2^n-1 in the range 1..32767]
774 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
775 * 2^n-1 in the range 1..32767]
776 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
777 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
778 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
780 enum nl80211_txq_attr
{
781 __NL80211_TXQ_ATTR_INVALID
,
782 NL80211_TXQ_ATTR_QUEUE
,
783 NL80211_TXQ_ATTR_TXOP
,
784 NL80211_TXQ_ATTR_CWMIN
,
785 NL80211_TXQ_ATTR_CWMAX
,
786 NL80211_TXQ_ATTR_AIFS
,
789 __NL80211_TXQ_ATTR_AFTER_LAST
,
790 NL80211_TXQ_ATTR_MAX
= __NL80211_TXQ_ATTR_AFTER_LAST
- 1
800 enum nl80211_sec_chan_offset
{
801 NL80211_SEC_CHAN_NO_HT
/* No HT */,
802 NL80211_SEC_CHAN_DISABLED
/* HT20 only */,
803 NL80211_SEC_CHAN_BELOW
/* HT40- */,
804 NL80211_SEC_CHAN_ABOVE
/* HT40+ */
808 __NL80211_BSS_INVALID
,
810 NL80211_BSS_FREQUENCY
,
812 NL80211_BSS_BEACON_INTERVAL
,
813 NL80211_BSS_CAPABILITY
,
814 NL80211_BSS_INFORMATION_ELEMENTS
,
817 __NL80211_BSS_AFTER_LAST
,
818 NL80211_BSS_MAX
= __NL80211_BSS_AFTER_LAST
- 1
821 #endif /* __LINUX_NL80211_H */