2 #include <netlink/attr.h>
8 void mac_addr_n2a(char *mac_addr
, const unsigned char *arg
)
13 for (i
= 0; i
< ETH_ALEN
; i
++) {
15 sprintf(mac_addr
+l
, "%02x", arg
[i
]);
18 sprintf(mac_addr
+l
, ":%02x", arg
[i
]);
24 int mac_addr_a2n(unsigned char *mac_addr
, char *arg
)
28 for (i
= 0; i
< ETH_ALEN
; i
++) {
30 char *cp
= strchr(arg
, ':');
35 if (sscanf(arg
, "%x", &temp
) != 1)
37 if (temp
< 0 || temp
> 255)
51 int parse_hex_mask(char *hexmask
, unsigned char **result
, size_t *result_len
,
54 size_t len
= strlen(hexmask
) / 2;
55 unsigned char *result_val
;
56 unsigned char *result_mask
= NULL
;
62 result_val
= calloc(len
+ 2, 1);
67 result_mask
= calloc(DIV_ROUND_UP(len
, 8) + 2, 1);
74 char *cp
= strchr(hexmask
, ':');
80 if (result_mask
&& (strcmp(hexmask
, "-") == 0 ||
81 strcmp(hexmask
, "xx") == 0 ||
82 strcmp(hexmask
, "--") == 0)) {
83 /* skip this byte and leave mask bit unset */
88 temp
= strtoul(hexmask
, &end
, 16);
91 if (temp
< 0 || temp
> 255)
93 result_val
[pos
] = temp
;
97 result_mask
[mask_pos
] |= 1 << (pos
% 8);
115 unsigned char *parse_hex(char *hex
, size_t *outlen
)
117 unsigned char *result
;
119 if (parse_hex_mask(hex
, &result
, outlen
, NULL
))
124 static const char *ifmodes
[NL80211_IFTYPE_MAX
+ 1] = {
136 "outside context of a BSS",
140 static char modebuf
[100];
142 const char *iftype_name(enum nl80211_iftype iftype
)
144 if (iftype
<= NL80211_IFTYPE_MAX
&& ifmodes
[iftype
])
145 return ifmodes
[iftype
];
146 sprintf(modebuf
, "Unknown mode (%d)", iftype
);
150 static const char *commands
[NL80211_CMD_MAX
+ 1] = {
152 * sed 's%^\tNL80211_CMD_%%;t n;d;:n s%^\([^=]*\),.*%\t[NL80211_CMD_\1] = \"\L\1\",%;t;d' nl80211.h | grep -v "reserved"
154 [NL80211_CMD_UNSPEC
] = "unspec",
155 [NL80211_CMD_GET_WIPHY
] = "get_wiphy",
156 [NL80211_CMD_SET_WIPHY
] = "set_wiphy",
157 [NL80211_CMD_NEW_WIPHY
] = "new_wiphy",
158 [NL80211_CMD_DEL_WIPHY
] = "del_wiphy",
159 [NL80211_CMD_GET_INTERFACE
] = "get_interface",
160 [NL80211_CMD_SET_INTERFACE
] = "set_interface",
161 [NL80211_CMD_NEW_INTERFACE
] = "new_interface",
162 [NL80211_CMD_DEL_INTERFACE
] = "del_interface",
163 [NL80211_CMD_GET_KEY
] = "get_key",
164 [NL80211_CMD_SET_KEY
] = "set_key",
165 [NL80211_CMD_NEW_KEY
] = "new_key",
166 [NL80211_CMD_DEL_KEY
] = "del_key",
167 [NL80211_CMD_GET_BEACON
] = "get_beacon",
168 [NL80211_CMD_SET_BEACON
] = "set_beacon",
169 [NL80211_CMD_START_AP
] = "start_ap",
170 [NL80211_CMD_STOP_AP
] = "stop_ap",
171 [NL80211_CMD_GET_STATION
] = "get_station",
172 [NL80211_CMD_SET_STATION
] = "set_station",
173 [NL80211_CMD_NEW_STATION
] = "new_station",
174 [NL80211_CMD_DEL_STATION
] = "del_station",
175 [NL80211_CMD_GET_MPATH
] = "get_mpath",
176 [NL80211_CMD_SET_MPATH
] = "set_mpath",
177 [NL80211_CMD_NEW_MPATH
] = "new_mpath",
178 [NL80211_CMD_DEL_MPATH
] = "del_mpath",
179 [NL80211_CMD_SET_BSS
] = "set_bss",
180 [NL80211_CMD_SET_REG
] = "set_reg",
181 [NL80211_CMD_REQ_SET_REG
] = "req_set_reg",
182 [NL80211_CMD_GET_MESH_CONFIG
] = "get_mesh_config",
183 [NL80211_CMD_SET_MESH_CONFIG
] = "set_mesh_config",
184 [NL80211_CMD_GET_REG
] = "get_reg",
185 [NL80211_CMD_GET_SCAN
] = "get_scan",
186 [NL80211_CMD_TRIGGER_SCAN
] = "trigger_scan",
187 [NL80211_CMD_NEW_SCAN_RESULTS
] = "new_scan_results",
188 [NL80211_CMD_SCAN_ABORTED
] = "scan_aborted",
189 [NL80211_CMD_REG_CHANGE
] = "reg_change",
190 [NL80211_CMD_AUTHENTICATE
] = "authenticate",
191 [NL80211_CMD_ASSOCIATE
] = "associate",
192 [NL80211_CMD_DEAUTHENTICATE
] = "deauthenticate",
193 [NL80211_CMD_DISASSOCIATE
] = "disassociate",
194 [NL80211_CMD_MICHAEL_MIC_FAILURE
] = "michael_mic_failure",
195 [NL80211_CMD_REG_BEACON_HINT
] = "reg_beacon_hint",
196 [NL80211_CMD_JOIN_IBSS
] = "join_ibss",
197 [NL80211_CMD_LEAVE_IBSS
] = "leave_ibss",
198 [NL80211_CMD_TESTMODE
] = "testmode",
199 [NL80211_CMD_CONNECT
] = "connect",
200 [NL80211_CMD_ROAM
] = "roam",
201 [NL80211_CMD_DISCONNECT
] = "disconnect",
202 [NL80211_CMD_SET_WIPHY_NETNS
] = "set_wiphy_netns",
203 [NL80211_CMD_GET_SURVEY
] = "get_survey",
204 [NL80211_CMD_NEW_SURVEY_RESULTS
] = "new_survey_results",
205 [NL80211_CMD_SET_PMKSA
] = "set_pmksa",
206 [NL80211_CMD_DEL_PMKSA
] = "del_pmksa",
207 [NL80211_CMD_FLUSH_PMKSA
] = "flush_pmksa",
208 [NL80211_CMD_REMAIN_ON_CHANNEL
] = "remain_on_channel",
209 [NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL
] = "cancel_remain_on_channel",
210 [NL80211_CMD_SET_TX_BITRATE_MASK
] = "set_tx_bitrate_mask",
211 [NL80211_CMD_REGISTER_FRAME
] = "register_frame",
212 [NL80211_CMD_FRAME
] = "frame",
213 [NL80211_CMD_FRAME_TX_STATUS
] = "frame_tx_status",
214 [NL80211_CMD_SET_POWER_SAVE
] = "set_power_save",
215 [NL80211_CMD_GET_POWER_SAVE
] = "get_power_save",
216 [NL80211_CMD_SET_CQM
] = "set_cqm",
217 [NL80211_CMD_NOTIFY_CQM
] = "notify_cqm",
218 [NL80211_CMD_SET_CHANNEL
] = "set_channel",
219 [NL80211_CMD_SET_WDS_PEER
] = "set_wds_peer",
220 [NL80211_CMD_FRAME_WAIT_CANCEL
] = "frame_wait_cancel",
221 [NL80211_CMD_JOIN_MESH
] = "join_mesh",
222 [NL80211_CMD_LEAVE_MESH
] = "leave_mesh",
223 [NL80211_CMD_UNPROT_DEAUTHENTICATE
] = "unprot_deauthenticate",
224 [NL80211_CMD_UNPROT_DISASSOCIATE
] = "unprot_disassociate",
225 [NL80211_CMD_NEW_PEER_CANDIDATE
] = "new_peer_candidate",
226 [NL80211_CMD_GET_WOWLAN
] = "get_wowlan",
227 [NL80211_CMD_SET_WOWLAN
] = "set_wowlan",
228 [NL80211_CMD_START_SCHED_SCAN
] = "start_sched_scan",
229 [NL80211_CMD_STOP_SCHED_SCAN
] = "stop_sched_scan",
230 [NL80211_CMD_SCHED_SCAN_RESULTS
] = "sched_scan_results",
231 [NL80211_CMD_SCHED_SCAN_STOPPED
] = "sched_scan_stopped",
232 [NL80211_CMD_SET_REKEY_OFFLOAD
] = "set_rekey_offload",
233 [NL80211_CMD_PMKSA_CANDIDATE
] = "pmksa_candidate",
234 [NL80211_CMD_TDLS_OPER
] = "tdls_oper",
235 [NL80211_CMD_TDLS_MGMT
] = "tdls_mgmt",
236 [NL80211_CMD_UNEXPECTED_FRAME
] = "unexpected_frame",
237 [NL80211_CMD_PROBE_CLIENT
] = "probe_client",
238 [NL80211_CMD_REGISTER_BEACONS
] = "register_beacons",
239 [NL80211_CMD_UNEXPECTED_4ADDR_FRAME
] = "unexpected_4addr_frame",
240 [NL80211_CMD_SET_NOACK_MAP
] = "set_noack_map",
241 [NL80211_CMD_CH_SWITCH_NOTIFY
] = "ch_switch_notify",
242 [NL80211_CMD_START_P2P_DEVICE
] = "start_p2p_device",
243 [NL80211_CMD_STOP_P2P_DEVICE
] = "stop_p2p_device",
244 [NL80211_CMD_CONN_FAILED
] = "conn_failed",
245 [NL80211_CMD_SET_MCAST_RATE
] = "set_mcast_rate",
246 [NL80211_CMD_SET_MAC_ACL
] = "set_mac_acl",
247 [NL80211_CMD_RADAR_DETECT
] = "radar_detect",
248 [NL80211_CMD_GET_PROTOCOL_FEATURES
] = "get_protocol_features",
249 [NL80211_CMD_UPDATE_FT_IES
] = "update_ft_ies",
250 [NL80211_CMD_FT_EVENT
] = "ft_event",
251 [NL80211_CMD_CRIT_PROTOCOL_START
] = "crit_protocol_start",
252 [NL80211_CMD_CRIT_PROTOCOL_STOP
] = "crit_protocol_stop",
253 [NL80211_CMD_GET_COALESCE
] = "get_coalesce",
254 [NL80211_CMD_SET_COALESCE
] = "set_coalesce",
255 [NL80211_CMD_CHANNEL_SWITCH
] = "channel_switch",
256 [NL80211_CMD_VENDOR
] = "vendor",
257 [NL80211_CMD_SET_QOS_MAP
] = "set_qos_map",
258 [NL80211_CMD_ADD_TX_TS
] = "add_tx_ts",
259 [NL80211_CMD_DEL_TX_TS
] = "del_tx_ts",
260 [NL80211_CMD_GET_MPP
] = "get_mpp",
261 [NL80211_CMD_JOIN_OCB
] = "join_ocb",
262 [NL80211_CMD_LEAVE_OCB
] = "leave_ocb",
263 [NL80211_CMD_CH_SWITCH_STARTED_NOTIFY
] = "ch_switch_started_notify",
264 [NL80211_CMD_TDLS_CHANNEL_SWITCH
] = "tdls_channel_switch",
265 [NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH
] = "tdls_cancel_channel_switch",
266 [NL80211_CMD_WIPHY_REG_CHANGE
] = "wiphy_reg_change",
267 [NL80211_CMD_ABORT_SCAN
] = "abort_scan",
268 [NL80211_CMD_START_NAN
] = "start_nan",
269 [NL80211_CMD_STOP_NAN
] = "stop_nan",
270 [NL80211_CMD_ADD_NAN_FUNCTION
] = "add_nan_function",
271 [NL80211_CMD_DEL_NAN_FUNCTION
] = "del_nan_function",
272 [NL80211_CMD_CHANGE_NAN_CONFIG
] = "change_nan_config",
273 [NL80211_CMD_NAN_MATCH
] = "nan_match",
274 [NL80211_CMD_SET_MULTICAST_TO_UNICAST
] = "set_multicast_to_unicast",
275 [NL80211_CMD_UPDATE_CONNECT_PARAMS
] = "update_connect_params",
276 [NL80211_CMD_SET_PMK
] = "set_pmk",
277 [NL80211_CMD_DEL_PMK
] = "del_pmk",
278 [NL80211_CMD_PORT_AUTHORIZED
] = "port_authorized",
279 [NL80211_CMD_RELOAD_REGDB
] = "reload_regdb",
280 [NL80211_CMD_EXTERNAL_AUTH
] = "external_auth",
281 [NL80211_CMD_STA_OPMODE_CHANGED
] = "sta_opmode_changed",
282 [NL80211_CMD_CONTROL_PORT_FRAME
] = "control_port_frame",
283 [NL80211_CMD_GET_FTM_RESPONDER_STATS
] = "get_ftm_responder_stats",
284 [NL80211_CMD_PEER_MEASUREMENT_START
] = "peer_measurement_start",
285 [NL80211_CMD_PEER_MEASUREMENT_RESULT
] = "peer_measurement_result",
286 [NL80211_CMD_PEER_MEASUREMENT_COMPLETE
] = "peer_measurement_complete",
287 [NL80211_CMD_NOTIFY_RADAR
] = "notify_radar",
290 static char cmdbuf
[100];
292 const char *command_name(enum nl80211_commands cmd
)
294 if (cmd
<= NL80211_CMD_MAX
&& commands
[cmd
])
295 return commands
[cmd
];
296 sprintf(cmdbuf
, "Unknown command (%d)", cmd
);
300 int ieee80211_channel_to_frequency(int chan
, enum nl80211_band band
)
302 /* see 802.11 17.3.8.3.2 and Annex J
303 * there are overlapping channel numbers in 5GHz and 2GHz bands */
305 return 0; /* not supported */
307 case NL80211_BAND_2GHZ
:
311 return 2407 + chan
* 5;
313 case NL80211_BAND_5GHZ
:
314 if (chan
>= 182 && chan
<= 196)
315 return 4000 + chan
* 5;
317 return 5000 + chan
* 5;
319 case NL80211_BAND_60GHZ
:
321 return 56160 + chan
* 2160;
326 return 0; /* not supported */
329 int ieee80211_frequency_to_channel(int freq
)
331 /* see 802.11-2007 17.3.8.3.2 and Annex J */
334 else if (freq
< 2484)
335 return (freq
- 2407) / 5;
336 else if (freq
>= 4910 && freq
<= 4980)
337 return (freq
- 4000) / 5;
338 else if (freq
<= 45000) /* DMG band lower limit */
339 return (freq
- 5000) / 5;
340 else if (freq
>= 58320 && freq
<= 64800)
341 return (freq
- 56160) / 2160;
346 void print_ssid_escaped(const uint8_t len
, const uint8_t *data
)
350 for (i
= 0; i
< len
; i
++) {
351 if (isprint(data
[i
]) && data
[i
] != ' ' && data
[i
] != '\\')
352 printf("%c", data
[i
]);
353 else if (data
[i
] == ' ' &&
354 (i
!= 0 && i
!= len
-1))
357 printf("\\x%.2x", data
[i
]);
361 static int hex2num(char digit
)
363 if (!isxdigit(digit
))
367 return tolower(digit
) - 'a' + 10;
370 static int hex2byte(const char *hex
)
374 d1
= hex2num(hex
[0]);
377 d2
= hex2num(hex
[1]);
380 return (d1
<< 4) | d2
;
383 char *hex2bin(const char *hex
, char *buf
)
400 static int parse_akm_suite(const char *cipher_str
)
403 if (!strcmp(cipher_str
, "PSK"))
405 if (!strcmp(cipher_str
, "FT/PSK"))
407 if (!strcmp(cipher_str
, "PSK/SHA-256"))
412 static int parse_cipher_suite(const char *cipher_str
)
415 if (!strcmp(cipher_str
, "TKIP"))
417 if (!strcmp(cipher_str
, "CCMP") || !strcmp(cipher_str
, "CCMP-128"))
419 if (!strcmp(cipher_str
, "GCMP") || !strcmp(cipher_str
, "GCMP-128"))
421 if (!strcmp(cipher_str
, "GCMP-256"))
423 if (!strcmp(cipher_str
, "CCMP-256"))
428 int parse_keys(struct nl_msg
*msg
, char **argv
[], int *argc
)
432 bool have_default
= false;
440 if (!memcmp(&arg
[pos
], "psk", 3)) {
442 int cipher_suite
, akm_suite
;
452 NLA_PUT_U32(msg
, NL80211_ATTR_WPA_VERSIONS
, NL80211_WPA_VERSION_2
);
454 if (strlen(&arg
[pos
]) != (sizeof(psk_keybuf
) * 2) || !hex2bin(&arg
[pos
], psk_keybuf
)) {
459 NLA_PUT(msg
, NL80211_ATTR_PMK
, 32, psk_keybuf
);
460 NLA_PUT_U32(msg
, NL80211_ATTR_AUTH_TYPE
, NL80211_AUTHTYPE_OPEN_SYSTEM
);
466 akm_suite
= parse_akm_suite(arg
);
470 NLA_PUT_U32(msg
, NL80211_ATTR_AKM_SUITES
, akm_suite
);
476 cipher_suite
= parse_cipher_suite(arg
);
477 if (cipher_suite
< 0)
480 NLA_PUT_U32(msg
, NL80211_ATTR_CIPHER_SUITES_PAIRWISE
, cipher_suite
);
486 cipher_suite
= parse_cipher_suite(arg
);
487 if (cipher_suite
< 0)
490 NLA_PUT_U32(msg
, NL80211_ATTR_CIPHER_SUITE_GROUP
, cipher_suite
);
497 NLA_PUT_FLAG(msg
, NL80211_ATTR_PRIVACY
);
499 keys
= nla_nest_start(msg
, NL80211_ATTR_KEYS
);
505 struct nlattr
*key
= nla_nest_start(msg
, ++i
);
514 if (arg
[pos
] == 'd') {
515 NLA_PUT_FLAG(msg
, NL80211_KEY_DEFAULT
);
522 if (!isdigit(arg
[pos
]))
524 NLA_PUT_U8(msg
, NL80211_KEY_IDX
, arg
[pos
++] - '0');
525 if (arg
[pos
++] != ':')
528 switch (strlen(keydata
)) {
530 keydata
= hex2bin(keydata
, keybuf
);
533 NLA_PUT_U32(msg
, NL80211_KEY_CIPHER
, 0x000FAC01);
537 keydata
= hex2bin(keydata
, keybuf
);
540 NLA_PUT_U32(msg
, NL80211_KEY_CIPHER
, 0x000FAC05);
550 NLA_PUT(msg
, NL80211_KEY_DATA
, keylen
, keydata
);
555 /* one key should be TX key */
556 if (!have_default
&& !*argc
)
557 NLA_PUT_FLAG(msg
, NL80211_KEY_DEFAULT
);
559 nla_nest_end(msg
, key
);
562 nla_nest_end(msg
, keys
);
568 fprintf(stderr
, "key must be [d:]index:data where\n"
569 " 'd:' means default (transmit) key\n"
570 " 'index:' is a single digit (0-3)\n"
571 " 'data' must be 5 or 13 ascii chars\n"
572 " or 10 or 26 hex digits\n"
573 "for example: d:2:6162636465 is the same as d:2:abcde\n"
574 "or psk:data <AKM Suite> <pairwise CIPHER> <groupwise CIPHER> where\n"
575 " 'data' is the PSK (output of wpa_passphrase and the CIPHER can be CCMP or GCMP\n"
576 "for example: psk:0123456789abcdef PSK CCMP CCMP\n"
577 "The allowed AKM suites are PSK, FT/PSK, PSK/SHA-256\n"
578 "The allowed Cipher suites are TKIP, CCMP, GCMP, GCMP-256, CCMP-256\n");
582 enum nl80211_chan_width
str_to_bw(const char *str
)
584 static const struct {
588 { .name
= "5", .val
= NL80211_CHAN_WIDTH_5
, },
589 { .name
= "10", .val
= NL80211_CHAN_WIDTH_10
, },
590 { .name
= "20", .val
= NL80211_CHAN_WIDTH_20
, },
591 { .name
= "40", .val
= NL80211_CHAN_WIDTH_40
, },
592 { .name
= "80", .val
= NL80211_CHAN_WIDTH_80
, },
593 { .name
= "80+80", .val
= NL80211_CHAN_WIDTH_80P80
, },
594 { .name
= "160", .val
= NL80211_CHAN_WIDTH_160
, },
598 for (i
= 0; i
< ARRAY_SIZE(bwmap
); i
++) {
599 if (strcasecmp(bwmap
[i
].name
, str
) == 0)
603 return NL80211_CHAN_WIDTH_20_NOHT
;
606 static int parse_freqs(struct chandef
*chandef
, int argc
, char **argv
,
611 bool need_cf1
= false, need_cf2
= false;
616 chandef
->width
= str_to_bw(argv
[0]);
618 switch (chandef
->width
) {
619 case NL80211_CHAN_WIDTH_20_NOHT
:
620 /* First argument was not understood, give up gracefully. */
622 case NL80211_CHAN_WIDTH_20
:
623 case NL80211_CHAN_WIDTH_5
:
624 case NL80211_CHAN_WIDTH_10
:
626 case NL80211_CHAN_WIDTH_80P80
:
629 case NL80211_CHAN_WIDTH_40
:
630 case NL80211_CHAN_WIDTH_80
:
631 case NL80211_CHAN_WIDTH_160
:
647 freq
= strtoul(argv
[1], &end
, 10);
652 chandef
->center_freq1
= freq
;
663 freq
= strtoul(argv
[2], &end
, 10);
666 chandef
->center_freq2
= freq
;
675 * parse_freqchan - Parse frequency or channel definition
677 * @chandef: chandef structure to be filled in
678 * @chan: Boolean whether to parse a channel or frequency based specifier
679 * @argc: Number of arguments
680 * @argv: Array of string arguments
681 * @parsed: Pointer to return the number of used arguments, or NULL to error
682 * out if any argument is left unused.
684 * The given chandef structure will be filled in from the command line
685 * arguments. argc/argv will be updated so that further arguments from the
686 * command line can be parsed.
688 * Note that despite the fact that the function knows how many center freqs
689 * are needed, there's an ambiguity if the next argument after this is an
690 * integer argument, since the valid channel width values are interpreted
691 * as such, rather than a following argument. This can be avoided by the
692 * user by giving "NOHT" instead.
694 * The working specifier if chan is set are:
695 * <channel> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
697 * And if frequency is set:
698 * <freq> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
699 * <control freq> [5|10|20|40|80|80+80|160] [<center1_freq> [<center2_freq>]]
701 * If the mode/channel width is not given the NOHT is assumed.
703 * Return: Number of used arguments, zero or negative error number otherwise
705 int parse_freqchan(struct chandef
*chandef
, bool chan
, int argc
, char **argv
,
709 static const struct chanmode chanmode
[] = {
711 .width
= NL80211_CHAN_WIDTH_20
,
713 .chantype
= NL80211_CHAN_HT20
},
715 .width
= NL80211_CHAN_WIDTH_40
,
717 .chantype
= NL80211_CHAN_HT40PLUS
},
719 .width
= NL80211_CHAN_WIDTH_40
,
721 .chantype
= NL80211_CHAN_HT40MINUS
},
723 .width
= NL80211_CHAN_WIDTH_20_NOHT
,
725 .chantype
= NL80211_CHAN_NO_HT
},
727 .width
= NL80211_CHAN_WIDTH_5
,
731 .width
= NL80211_CHAN_WIDTH_10
,
735 .width
= NL80211_CHAN_WIDTH_80
,
739 const struct chanmode
*chanmode_selected
= NULL
;
750 freq
= strtoul(argv
[0], &end
, 10);
758 memset(chandef
, 0, sizeof(struct chandef
));
761 enum nl80211_band band
;
763 band
= freq
<= 14 ? NL80211_BAND_2GHZ
: NL80211_BAND_5GHZ
;
764 freq
= ieee80211_channel_to_frequency(freq
, band
);
766 chandef
->control_freq
= freq
;
767 /* Assume 20MHz NOHT channel for now. */
768 chandef
->center_freq1
= freq
;
770 /* Try to parse HT mode definitions */
772 for (i
= 0; i
< ARRAY_SIZE(chanmode
); i
++) {
773 if (strcasecmp(chanmode
[i
].name
, argv
[1]) == 0) {
774 chanmode_selected
= &chanmode
[i
];
781 /* channel mode given, use it and return. */
782 if (chanmode_selected
) {
783 chandef
->center_freq1
= get_cf1(chanmode_selected
, freq
);
784 chandef
->width
= chanmode_selected
->width
;
788 /* This was a only a channel definition, nothing further may follow. */
792 res
= parse_freqs(chandef
, argc
- 1, argv
+ 1, &_parsed
);
795 /* Error out if parsed is NULL. */
796 if (!parsed
&& _parsed
!= argc
)
805 int put_chandef(struct nl_msg
*msg
, struct chandef
*chandef
)
807 NLA_PUT_U32(msg
, NL80211_ATTR_WIPHY_FREQ
, chandef
->control_freq
);
808 NLA_PUT_U32(msg
, NL80211_ATTR_CHANNEL_WIDTH
, chandef
->width
);
810 switch (chandef
->width
) {
811 case NL80211_CHAN_WIDTH_20_NOHT
:
813 NL80211_ATTR_WIPHY_CHANNEL_TYPE
,
816 case NL80211_CHAN_WIDTH_20
:
818 NL80211_ATTR_WIPHY_CHANNEL_TYPE
,
821 case NL80211_CHAN_WIDTH_40
:
822 if (chandef
->control_freq
> chandef
->center_freq1
)
824 NL80211_ATTR_WIPHY_CHANNEL_TYPE
,
825 NL80211_CHAN_HT40MINUS
);
828 NL80211_ATTR_WIPHY_CHANNEL_TYPE
,
829 NL80211_CHAN_HT40PLUS
);
835 if (chandef
->center_freq1
)
837 NL80211_ATTR_CENTER_FREQ1
,
838 chandef
->center_freq1
);
840 if (chandef
->center_freq2
)
842 NL80211_ATTR_CENTER_FREQ2
,
843 chandef
->center_freq2
);
851 static void print_mcs_index(const __u8
*mcs
)
853 int mcs_bit
, prev_bit
= -2, prev_cont
= 0;
855 for (mcs_bit
= 0; mcs_bit
<= 76; mcs_bit
++) {
856 unsigned int mcs_octet
= mcs_bit
/8;
857 unsigned int MCS_RATE_BIT
= 1 << mcs_bit
% 8;
858 bool mcs_rate_idx_set
;
860 mcs_rate_idx_set
= !!(mcs
[mcs_octet
] & MCS_RATE_BIT
);
862 if (!mcs_rate_idx_set
)
865 if (prev_bit
!= mcs_bit
- 1) {
867 printf("%d, ", prev_bit
);
870 printf("%d", mcs_bit
);
872 } else if (!prev_cont
) {
881 printf("%d", prev_bit
);
886 * There are only 4 possible values, we just use a case instead of computing it,
887 * but technically this can also be computed through the formula:
889 * Max AMPDU length = (2 ^ (13 + exponent)) - 1 bytes
891 static __u32
compute_ampdu_length(__u8 exponent
)
894 case 0: return 8191; /* (2 ^(13 + 0)) -1 */
895 case 1: return 16383; /* (2 ^(13 + 1)) -1 */
896 case 2: return 32767; /* (2 ^(13 + 2)) -1 */
897 case 3: return 65535; /* (2 ^(13 + 3)) -1 */
902 static const char *print_ampdu_space(__u8 space
)
905 case 0: return "No restriction";
906 case 1: return "1/4 usec";
907 case 2: return "1/2 usec";
908 case 3: return "1 usec";
909 case 4: return "2 usec";
910 case 5: return "4 usec";
911 case 6: return "8 usec";
912 case 7: return "16 usec";
914 return "BUG (spacing more than 3 bits!)";
918 void print_ampdu_length(__u8 exponent
)
920 __u32 max_ampdu_length
;
922 max_ampdu_length
= compute_ampdu_length(exponent
);
924 if (max_ampdu_length
) {
925 printf("\t\tMaximum RX AMPDU length %d bytes (exponent: 0x0%02x)\n",
926 max_ampdu_length
, exponent
);
928 printf("\t\tMaximum RX AMPDU length: unrecognized bytes "
929 "(exponent: %d)\n", exponent
);
933 void print_ampdu_spacing(__u8 spacing
)
935 printf("\t\tMinimum RX AMPDU time spacing: %s (0x%02x)\n",
936 print_ampdu_space(spacing
), spacing
);
939 void print_ht_capability(__u16 cap
)
941 #define PRINT_HT_CAP(_cond, _str) \
944 printf("\t\t\t" _str "\n"); \
947 printf("\t\tCapabilities: 0x%02x\n", cap
);
949 PRINT_HT_CAP((cap
& BIT(0)), "RX LDPC");
950 PRINT_HT_CAP((cap
& BIT(1)), "HT20/HT40");
951 PRINT_HT_CAP(!(cap
& BIT(1)), "HT20");
953 PRINT_HT_CAP(((cap
>> 2) & 0x3) == 0, "Static SM Power Save");
954 PRINT_HT_CAP(((cap
>> 2) & 0x3) == 1, "Dynamic SM Power Save");
955 PRINT_HT_CAP(((cap
>> 2) & 0x3) == 3, "SM Power Save disabled");
957 PRINT_HT_CAP((cap
& BIT(4)), "RX Greenfield");
958 PRINT_HT_CAP((cap
& BIT(5)), "RX HT20 SGI");
959 PRINT_HT_CAP((cap
& BIT(6)), "RX HT40 SGI");
960 PRINT_HT_CAP((cap
& BIT(7)), "TX STBC");
962 PRINT_HT_CAP(((cap
>> 8) & 0x3) == 0, "No RX STBC");
963 PRINT_HT_CAP(((cap
>> 8) & 0x3) == 1, "RX STBC 1-stream");
964 PRINT_HT_CAP(((cap
>> 8) & 0x3) == 2, "RX STBC 2-streams");
965 PRINT_HT_CAP(((cap
>> 8) & 0x3) == 3, "RX STBC 3-streams");
967 PRINT_HT_CAP((cap
& BIT(10)), "HT Delayed Block Ack");
969 PRINT_HT_CAP(!(cap
& BIT(11)), "Max AMSDU length: 3839 bytes");
970 PRINT_HT_CAP((cap
& BIT(11)), "Max AMSDU length: 7935 bytes");
973 * For beacons and probe response this would mean the BSS
974 * does or does not allow the usage of DSSS/CCK HT40.
975 * Otherwise it means the STA does or does not use
978 PRINT_HT_CAP((cap
& BIT(12)), "DSSS/CCK HT40");
979 PRINT_HT_CAP(!(cap
& BIT(12)), "No DSSS/CCK HT40");
981 /* BIT(13) is reserved */
983 PRINT_HT_CAP((cap
& BIT(14)), "40 MHz Intolerant");
985 PRINT_HT_CAP((cap
& BIT(15)), "L-SIG TXOP protection");
989 void print_ht_mcs(const __u8
*mcs
)
991 /* As defined in 7.3.2.57.4 Supported MCS Set field */
992 unsigned int tx_max_num_spatial_streams
, max_rx_supp_data_rate
;
993 bool tx_mcs_set_defined
, tx_mcs_set_equal
, tx_unequal_modulation
;
995 max_rx_supp_data_rate
= (mcs
[10] | ((mcs
[11] & 0x3) << 8));
996 tx_mcs_set_defined
= !!(mcs
[12] & (1 << 0));
997 tx_mcs_set_equal
= !(mcs
[12] & (1 << 1));
998 tx_max_num_spatial_streams
= ((mcs
[12] >> 2) & 3) + 1;
999 tx_unequal_modulation
= !!(mcs
[12] & (1 << 4));
1001 if (max_rx_supp_data_rate
)
1002 printf("\t\tHT Max RX data rate: %d Mbps\n", max_rx_supp_data_rate
);
1003 /* XXX: else see 9.6.0e.5.3 how to get this I think */
1005 if (tx_mcs_set_defined
) {
1006 if (tx_mcs_set_equal
) {
1007 printf("\t\tHT TX/RX MCS rate indexes supported:");
1008 print_mcs_index(mcs
);
1010 printf("\t\tHT RX MCS rate indexes supported:");
1011 print_mcs_index(mcs
);
1013 if (tx_unequal_modulation
)
1014 printf("\t\tTX unequal modulation supported\n");
1016 printf("\t\tTX unequal modulation not supported\n");
1018 printf("\t\tHT TX Max spatial streams: %d\n",
1019 tx_max_num_spatial_streams
);
1021 printf("\t\tHT TX MCS rate indexes supported may differ\n");
1024 printf("\t\tHT RX MCS rate indexes supported:");
1025 print_mcs_index(mcs
);
1026 printf("\t\tHT TX MCS rate indexes are undefined\n");
1030 void print_vht_info(__u32 capa
, const __u8
*mcs
)
1035 printf("\t\tVHT Capabilities (0x%.8x):\n", capa
);
1037 #define PRINT_VHT_CAPA(_bit, _str) \
1039 if (capa & BIT(_bit)) \
1040 printf("\t\t\t" _str "\n"); \
1043 printf("\t\t\tMax MPDU length: ");
1045 case 0: printf("3895\n"); break;
1046 case 1: printf("7991\n"); break;
1047 case 2: printf("11454\n"); break;
1048 case 3: printf("(reserved)\n");
1050 printf("\t\t\tSupported Channel Width: ");
1051 switch ((capa
>> 2) & 3) {
1052 case 0: printf("neither 160 nor 80+80\n"); break;
1053 case 1: printf("160 MHz\n"); break;
1054 case 2: printf("160 MHz, 80+80 MHz\n"); break;
1055 case 3: printf("(reserved)\n");
1057 PRINT_VHT_CAPA(4, "RX LDPC");
1058 PRINT_VHT_CAPA(5, "short GI (80 MHz)");
1059 PRINT_VHT_CAPA(6, "short GI (160/80+80 MHz)");
1060 PRINT_VHT_CAPA(7, "TX STBC");
1062 PRINT_VHT_CAPA(11, "SU Beamformer");
1063 PRINT_VHT_CAPA(12, "SU Beamformee");
1064 /* compressed steering */
1065 /* # of sounding dimensions */
1066 PRINT_VHT_CAPA(19, "MU Beamformer");
1067 PRINT_VHT_CAPA(20, "MU Beamformee");
1068 PRINT_VHT_CAPA(21, "VHT TXOP PS");
1069 PRINT_VHT_CAPA(22, "+HTC-VHT");
1071 /* VHT link adaptation */
1072 PRINT_VHT_CAPA(28, "RX antenna pattern consistency");
1073 PRINT_VHT_CAPA(29, "TX antenna pattern consistency");
1075 printf("\t\tVHT RX MCS set:\n");
1076 tmp
= mcs
[0] | (mcs
[1] << 8);
1077 for (i
= 1; i
<= 8; i
++) {
1078 printf("\t\t\t%d streams: ", i
);
1079 switch ((tmp
>> ((i
-1)*2) ) & 3) {
1080 case 0: printf("MCS 0-7\n"); break;
1081 case 1: printf("MCS 0-8\n"); break;
1082 case 2: printf("MCS 0-9\n"); break;
1083 case 3: printf("not supported\n"); break;
1086 tmp
= mcs
[2] | (mcs
[3] << 8);
1087 printf("\t\tVHT RX highest supported: %d Mbps\n", tmp
& 0x1fff);
1089 printf("\t\tVHT TX MCS set:\n");
1090 tmp
= mcs
[4] | (mcs
[5] << 8);
1091 for (i
= 1; i
<= 8; i
++) {
1092 printf("\t\t\t%d streams: ", i
);
1093 switch ((tmp
>> ((i
-1)*2) ) & 3) {
1094 case 0: printf("MCS 0-7\n"); break;
1095 case 1: printf("MCS 0-8\n"); break;
1096 case 2: printf("MCS 0-9\n"); break;
1097 case 3: printf("not supported\n"); break;
1100 tmp
= mcs
[6] | (mcs
[7] << 8);
1101 printf("\t\tVHT TX highest supported: %d Mbps\n", tmp
& 0x1fff);
1104 void print_he_info(struct nlattr
*nl_iftype
)
1106 struct nlattr
*tb
[NL80211_BAND_IFTYPE_ATTR_MAX
+ 1];
1107 struct nlattr
*tb_flags
[NL80211_IFTYPE_MAX
+ 1];
1108 char *iftypes
[NUM_NL80211_IFTYPES
] = {
1109 "Unspec", "Adhoc", "Station", "AP", "AP/VLAN", "WDS", "Monitor",
1110 "Mesh", "P2P/Client", "P2P/Go", "P2P/Device", "OCB", "NAN",
1112 __u16 mac_cap
[3] = { 0 };
1113 __u16 phy_cap
[6] = { 0 };
1114 __u16 mcs_set
[6] = { 0 };
1115 __u8 ppet
[25] = { 0 };
1119 #define PRINT_HE_CAP(_var, _idx, _bit, _str) \
1121 if (_var[_idx] & BIT(_bit)) \
1122 printf("\t\t\t\t" _str "\n"); \
1125 #define PRINT_HE_CAP_MASK(_var, _idx, _shift, _mask, _str) \
1127 if ((_var[_idx] >> _shift) & _mask) \
1128 printf("\t\t\t\t" _str ": %d\n", (_var[_idx] >> _shift) & _mask); \
1131 #define PRINT_HE_MAC_CAP(...) PRINT_HE_CAP(mac_cap, __VA_ARGS__)
1132 #define PRINT_HE_MAC_CAP_MASK(...) PRINT_HE_CAP_MASK(mac_cap, __VA_ARGS__)
1133 #define PRINT_HE_PHY_CAP(...) PRINT_HE_CAP(phy_cap, __VA_ARGS__)
1134 #define PRINT_HE_PHY_CAP0(_idx, _bit, ...) PRINT_HE_CAP(phy_cap, _idx, _bit + 8, __VA_ARGS__)
1135 #define PRINT_HE_PHY_CAP_MASK(...) PRINT_HE_CAP_MASK(phy_cap, __VA_ARGS__)
1137 nla_parse(tb
, NL80211_BAND_IFTYPE_ATTR_MAX
,
1138 nla_data(nl_iftype
), nla_len(nl_iftype
), NULL
);
1140 if (!tb
[NL80211_BAND_IFTYPE_ATTR_IFTYPES
])
1143 if (nla_parse_nested(tb_flags
, NL80211_IFTYPE_MAX
,
1144 tb
[NL80211_BAND_IFTYPE_ATTR_IFTYPES
], NULL
))
1147 printf("\t\tHE Iftypes:");
1148 for (i
= 0; i
< NUM_NL80211_IFTYPES
; i
++)
1149 if (nla_get_flag(tb_flags
[i
]) && iftypes
[i
])
1150 printf(" %s", iftypes
[i
]);
1153 if (tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC
]) {
1154 len
= nla_len(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC
]);
1155 if (len
> sizeof(mac_cap
))
1156 len
= sizeof(mac_cap
);
1158 nla_data(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC
]),
1161 printf("\t\t\tHE MAC Capabilities (0x");
1162 for (i
= 0; i
< 3; i
++)
1163 printf("%04x", mac_cap
[i
]);
1166 PRINT_HE_MAC_CAP(0, 0, "+HTC HE Supported");
1167 PRINT_HE_MAC_CAP(0, 1, "TWT Requester");
1168 PRINT_HE_MAC_CAP(0, 2, "TWT Responder");
1169 PRINT_HE_MAC_CAP_MASK(0, 3, 0x3, "Dynamic BA Fragementation Level");
1170 PRINT_HE_MAC_CAP_MASK(0, 5, 0x7, "Maximum number of MSDUS Fragments");
1171 PRINT_HE_MAC_CAP_MASK(0, 8, 0x3, "Minimum Payload size of 128 bytes");
1172 PRINT_HE_MAC_CAP_MASK(0, 10, 0x3, "Trigger Frame MAC Padding Duration");
1173 PRINT_HE_MAC_CAP_MASK(0, 12, 0x7, "Multi-TID Aggregation Support");
1175 PRINT_HE_MAC_CAP(1, 1, "All Ack");
1176 PRINT_HE_MAC_CAP(1, 2, "TRS");
1177 PRINT_HE_MAC_CAP(1, 3, "BSR");
1178 PRINT_HE_MAC_CAP(1, 4, "Broadcast TWT");
1179 PRINT_HE_MAC_CAP(1, 5, "32-bit BA Bitmap");
1180 PRINT_HE_MAC_CAP(1, 6, "MU Cascading");
1181 PRINT_HE_MAC_CAP(1, 7, "Ack-Enabled Aggregation");
1182 PRINT_HE_MAC_CAP(1, 9, "OM Control");
1183 PRINT_HE_MAC_CAP(1, 10, "OFDMA RA");
1184 PRINT_HE_MAC_CAP_MASK(1, 11, 0x3, "Maximum A-MPDU Length Exponent");
1185 PRINT_HE_MAC_CAP(1, 13, "A-MSDU Fragmentation");
1186 PRINT_HE_MAC_CAP(1, 14, "Flexible TWT Scheduling");
1187 PRINT_HE_MAC_CAP(1, 15, "RX Control Frame to MultiBSS");
1189 PRINT_HE_MAC_CAP(2, 0, "BSRP BQRP A-MPDU Aggregation");
1190 PRINT_HE_MAC_CAP(2, 1, "QTP");
1191 PRINT_HE_MAC_CAP(2, 2, "BQR");
1192 PRINT_HE_MAC_CAP(2, 3, "SRP Responder Role");
1193 PRINT_HE_MAC_CAP(2, 4, "NDP Feedback Report");
1194 PRINT_HE_MAC_CAP(2, 5, "OPS");
1195 PRINT_HE_MAC_CAP(2, 6, "A-MSDU in A-MPDU");
1196 PRINT_HE_MAC_CAP_MASK(2, 7, 7, "Multi-TID Aggregation TX");
1197 PRINT_HE_MAC_CAP(2, 10, "HE Subchannel Selective Transmission");
1198 PRINT_HE_MAC_CAP(2, 11, "UL 2x996-Tone RU");
1199 PRINT_HE_MAC_CAP(2, 12, "OM Control UL MU Data Disable RX");
1201 if (tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY
]) {
1202 len
= nla_len(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY
]);
1204 if (len
> sizeof(phy_cap
) - 1)
1205 len
= sizeof(phy_cap
) - 1;
1206 memcpy(&((__u8
*)phy_cap
)[1],
1207 nla_data(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY
]),
1210 printf("\t\t\tHE PHY Capabilities: (0x");
1211 for (i
= 0; i
< 11; i
++)
1212 printf("%02x", ((__u8
*)phy_cap
)[i
+ 1]);
1215 PRINT_HE_PHY_CAP0(0, 1, "HE40/2.4GHz");
1216 PRINT_HE_PHY_CAP0(0, 2, "HE40/HE80/5GHz");
1217 PRINT_HE_PHY_CAP0(0, 3, "HE160/5GHz");
1218 PRINT_HE_PHY_CAP0(0, 4, "HE160/HE80+80/5GHz");
1219 PRINT_HE_PHY_CAP0(0, 5, "242 tone RUs/2.4GHz");
1220 PRINT_HE_PHY_CAP0(0, 6, "242 tone RUs/5GHz");
1222 PRINT_HE_PHY_CAP_MASK(1, 0, 0xf, "Punctured Preamble RX");
1223 PRINT_HE_PHY_CAP_MASK(1, 4, 0x1, "Device Class");
1224 PRINT_HE_PHY_CAP(1, 5, "LDPC Coding in Payload");
1225 PRINT_HE_PHY_CAP(1, 6, "HE SU PPDU with 1x HE-LTF and 0.8us GI");
1226 PRINT_HE_PHY_CAP_MASK(1, 7, 0x3, "Midamble Rx Max NSTS");
1227 PRINT_HE_PHY_CAP(1, 9, "NDP with 4x HE-LTF and 3.2us GI");
1228 PRINT_HE_PHY_CAP(1, 10, "STBC Tx <= 80MHz");
1229 PRINT_HE_PHY_CAP(1, 11, "STBC Rx <= 80MHz");
1230 PRINT_HE_PHY_CAP(1, 12, "Doppler Tx");
1231 PRINT_HE_PHY_CAP(1, 13, "Doppler Rx");
1232 PRINT_HE_PHY_CAP(1, 14, "Full Bandwidth UL MU-MIMO");
1233 PRINT_HE_PHY_CAP(1, 15, "Partial Bandwidth UL MU-MIMO");
1235 PRINT_HE_PHY_CAP_MASK(2, 0, 0x3, "DCM Max Constellation");
1236 PRINT_HE_PHY_CAP_MASK(2, 2, 0x1, "DCM Max NSS Tx");
1237 PRINT_HE_PHY_CAP_MASK(2, 3, 0x3, "DCM Max Constellation Rx");
1238 PRINT_HE_PHY_CAP_MASK(2, 5, 0x1, "DCM Max NSS Rx");
1239 PRINT_HE_PHY_CAP(2, 6, "Rx HE MU PPDU from Non-AP STA");
1240 PRINT_HE_PHY_CAP(2, 7, "SU Beamformer");
1241 PRINT_HE_PHY_CAP(2, 8, "SU Beamformee");
1242 PRINT_HE_PHY_CAP(2, 9, "MU Beamformer");
1243 PRINT_HE_PHY_CAP_MASK(2, 10, 0x7, "Beamformee STS <= 80Mhz");
1244 PRINT_HE_PHY_CAP_MASK(2, 13, 0x7, "Beamformee STS > 80Mhz");
1246 PRINT_HE_PHY_CAP_MASK(3, 0, 0x7, "Sounding Dimensions <= 80Mhz");
1247 PRINT_HE_PHY_CAP_MASK(3, 3, 0x7, "Sounding Dimensions > 80Mhz");
1248 PRINT_HE_PHY_CAP(3, 6, "Ng = 16 SU Feedback");
1249 PRINT_HE_PHY_CAP(3, 7, "Ng = 16 MU Feedback");
1250 PRINT_HE_PHY_CAP(3, 8, "Codebook Size SU Feedback");
1251 PRINT_HE_PHY_CAP(3, 9, "Codebook Size MU Feedback");
1252 PRINT_HE_PHY_CAP(3, 10, "Triggered SU Beamforming Feedback");
1253 PRINT_HE_PHY_CAP(3, 11, "Triggered MU Beamforming Feedback");
1254 PRINT_HE_PHY_CAP(3, 12, "Triggered CQI Feedback");
1255 PRINT_HE_PHY_CAP(3, 13, "Partial Bandwidth Extended Range");
1256 PRINT_HE_PHY_CAP(3, 14, "Partial Bandwidth DL MU-MIMO");
1257 PRINT_HE_PHY_CAP(3, 15, "PPE Threshold Present");
1259 PRINT_HE_PHY_CAP(4, 0, "SRP-based SR");
1260 PRINT_HE_PHY_CAP(4, 1, "Power Boost Factor ar");
1261 PRINT_HE_PHY_CAP(4, 2, "HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI");
1262 PRINT_HE_PHY_CAP_MASK(4, 3, 0x7, "Max NC");
1263 PRINT_HE_PHY_CAP(4, 6, "STBC Tx > 80MHz");
1264 PRINT_HE_PHY_CAP(4, 7, "STBC Rx > 80MHz");
1265 PRINT_HE_PHY_CAP(4, 8, "HE ER SU PPDU 4x HE-LTF 0.8us GI");
1266 PRINT_HE_PHY_CAP(4, 9, "20MHz in 40MHz HE PPDU 2.4GHz");
1267 PRINT_HE_PHY_CAP(4, 10, "20MHz in 160/80+80MHz HE PPDU");
1268 PRINT_HE_PHY_CAP(4, 11, "80MHz in 160/80+80MHz HE PPDU");
1269 PRINT_HE_PHY_CAP(4, 12, "HE ER SU PPDU 1x HE-LTF 0.8us GI");
1270 PRINT_HE_PHY_CAP(4, 13, "Midamble Rx 2x & 1x HE-LTF");
1271 PRINT_HE_PHY_CAP_MASK(4, 14, 0x3, "DCM Max BW");
1273 PRINT_HE_PHY_CAP(5, 0, "Longer Than 16HE SIG-B OFDM Symbols");
1274 PRINT_HE_PHY_CAP(5, 1, "Non-Triggered CQI Feedback");
1275 PRINT_HE_PHY_CAP(5, 2, "TX 1024-QAM");
1276 PRINT_HE_PHY_CAP(5, 3, "RX 1024-QAM");
1277 PRINT_HE_PHY_CAP(5, 4, "RX Full BW SU Using HE MU PPDU with Compression SIGB");
1278 PRINT_HE_PHY_CAP(5, 5, "RX Full BW SU Using HE MU PPDU with Non-Compression SIGB");
1280 if (tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET
]) {
1281 len
= nla_len(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET
]);
1282 if (len
> sizeof(mcs_set
))
1283 len
= sizeof(mcs_set
);
1285 nla_data(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET
]),
1289 for (i
= 0; i
< 3; i
++) {
1290 __u8 phy_cap_support
[] = { BIT(1) | BIT(2), BIT(3), BIT(4) };
1291 char *bw
[] = { "<= 80", "160", "80+80" };
1294 if ((phy_cap
[0] & (phy_cap_support
[i
] << 8)) == 0)
1297 for (j
= 0; j
< 2; j
++) {
1299 printf("\t\t\tHE %s MCS and NSS set %s MHz\n", j
? "TX" : "RX", bw
[i
]);
1300 for (k
= 0; k
< 8; k
++) {
1301 __u16 mcs
= mcs_set
[(i
* 2) + j
];
1304 printf("\t\t\t\t\t %d streams: ", k
+ 1);
1306 printf("not supported\n");
1308 printf("MCS 0-%d\n", 7 + (mcs
* 2));
1315 if (tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE
]) {
1316 len
= nla_len(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE
]);
1317 if (len
> sizeof(ppet
))
1320 nla_data(tb
[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE
]),
1324 if (len
&& (phy_cap
[3] & BIT(15))) {
1327 printf("\t\t\tPPE Threshold ");
1328 for (i
= 0; i
< len
; i
++)
1330 printf("0x%02x ", ppet
[i
]);
1335 void iw_hexdump(const char *prefix
, const __u8
*buf
, size_t size
)
1339 printf("%s: ", prefix
);
1340 for (i
= 0; i
< size
; i
++) {
1341 if (i
&& i
% 16 == 0)
1342 printf("\n%s: ", prefix
);
1343 printf("%02x ", buf
[i
]);
1348 int get_cf1(const struct chanmode
*chanmode
, unsigned long freq
)
1350 unsigned int cf1
= freq
, j
;
1351 unsigned int vht80
[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
1353 switch (chanmode
->width
) {
1354 case NL80211_CHAN_WIDTH_80
:
1355 /* setup center_freq1 */
1356 for (j
= 0; j
< ARRAY_SIZE(vht80
); j
++) {
1357 if (freq
>= vht80
[j
] && freq
< vht80
[j
] + 80)
1361 if (j
== ARRAY_SIZE(vht80
))
1364 cf1
= vht80
[j
] + 30;
1367 cf1
= freq
+ chanmode
->freq1_diff
;
1374 int parse_random_mac_addr(struct nl_msg
*msg
, char *addrs
)
1376 char *a_addr
, *a_mask
, *sep
;
1377 unsigned char addr
[ETH_ALEN
], mask
[ETH_ALEN
];
1380 /* randomise all but the multicast bit */
1381 NLA_PUT(msg
, NL80211_ATTR_MAC
, ETH_ALEN
,
1382 "\x00\x00\x00\x00\x00\x00");
1383 NLA_PUT(msg
, NL80211_ATTR_MAC_MASK
, ETH_ALEN
,
1384 "\x01\x00\x00\x00\x00\x00");
1392 sep
= strchr(addrs
, '/');
1400 if (mac_addr_a2n(addr
, a_addr
) || mac_addr_a2n(mask
, a_mask
))
1403 NLA_PUT(msg
, NL80211_ATTR_MAC
, ETH_ALEN
, addr
);
1404 NLA_PUT(msg
, NL80211_ATTR_MAC_MASK
, ETH_ALEN
, mask
);