1 lldpd: implementation of IEEE 802.1ab (LLDP)
2 ============================================
4 [![Build Status](https://secure.travis-ci.org/vincentbernat/lldpd.png?branch=master)](http://travis-ci.org/vincentbernat/lldpd)
6 http://vincentbernat.github.com/lldpd/
11 LLDP (Link Layer Discovery Protocol) is an industry standard protocol
12 designed to supplant proprietary Link-Layer protocols such as
13 Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery
14 Protocol). The goal of LLDP is to provide an inter-vendor compatible
15 mechanism to deliver Link-Layer notifications to adjacent network
18 lldpd implements both reception and sending. It also implements an
19 SNMP subagent for net-snmp to get local and remote LLDP
20 information. The LLDP-MIB is partially implemented but the most useful
21 tables are here. lldpd also partially implements LLDP-MED.
23 lldpd supports bridge, vlan and bonding.
25 The following OS are supported:
34 Windows is not supported but you can use
35 [WinLLDPService](https://github.com/raspi/WinLLDPService/) as a
41 For general instructions [prefer the
42 website](http://vincentbernat.github.io/lldpd/installation.html),
43 including building from released tarballs.
45 To compile lldpd from Git, use the following commands:
52 lldpd uses privilege separation to increase its security. Two
53 processes, one running as root and doing minimal stuff and the other
54 running as an unprivileged user into a chroot doing most of the stuff,
55 are cooperating. You need to create a user called `_lldpd` in a group
56 `_lldpd` (this can be change with `./configure`). You also need to
57 create an empty directory `/usr/local/var/run/lldpd` (it needs to be
58 owned by root, not `_lldpd`!). If you get fuzzy timestamps from
59 syslog, copy `/etc/locatime` into the chroot.
61 `lldpcli` lets one query information collected through the command
62 line. If you don't want to run it as root, just install it setuid or
66 -----------------------
68 The same procedure as above applies for macOS. However, there are
71 1. Use [Homebrew](https://brew.sh):
74 # Or, for the latest version:
75 brew install https://raw.github.com/vincentbernat/lldpd/master/osx/lldpd.rb
77 2. Build an macOS installer package which should work on the same
80 mkdir build && cd build
81 ../configure --prefix=/usr/local --localstatedir=/var --sysconfdir=/private/etc --with-embedded-libevent \
85 If you want to compile for an older version of macOS, you need
86 to find the right SDK and issues commands like those:
88 SDK=/Developer/SDKs/MacOSX10.6.sdk
89 mkdir build && cd build
90 ../configure --prefix=/usr/local --localstatedir=/var --sysconfdir=/private/etc --with-embedded-libevent \
92 CFLAGS="-mmacosx-version-min=10.6 -isysroot $SDK" \
93 LDFLAGS="-mmacosx-version-min=10.6 -isysroot $SDK"
96 With recent SDK, you don't need to specify an alternate SDK. They
97 are organized in a way that should enable compatibility with older
100 mkdir build && cd build
101 ../configure --prefix=/usr/local --localstatedir=/var --sysconfdir=/private/etc --with-embedded-libevent \
103 CFLAGS="-mmacosx-version-min=10.9" \
104 LDFLAGS="-mmacosx-version-min=10.9"
107 You can check with `otool -l` that you got what you expected in
108 term of supported versions.
110 If you don't follow the above procedures, you will have to create the
111 user/group `_lldpd`. Have a look at how this is done in
112 `osx/scripts/postinstall`.
114 Installation (Android)
115 ----------------------
117 You need to download [Android NDK][]. Once unpacked, you can generate
118 a toolchain using the following command (for ARM64):
120 ./build/tools/make-standalone-toolchain.sh \
121 --platform=android-24 \
123 --install-dir=../android-toolchain
124 export TOOLCHAIN=$PWD/../android-toolchain
126 Then, you can build `lldpd` with the following commands:
128 mkdir build && cd build
129 export PATH=$PATH:$TOOLCHAIN/bin
131 --host=arm64-linux-androideabi \
132 --with-sysroot=$TOOLCHAIN/sysroot \
134 --sbindir=/system/bin \
135 --runstatedir=/data/data/lldpd \
136 --with-privsep-user=root \
137 --with-privsep-group=root
139 make install DESTDIR=$PWD/install
141 Then, copy `install/system/bin/*` to `/system/bin` on the target
142 system and `install/system/lib/*.so*` to `/system/lib` on the target
143 system. You may need to create `/data/data/lldpd` as well.
145 [Android NDK]: http://developer.android.com/tools/sdk/ndk/index.html
150 lldpd also implements CDP (Cisco Discovery Protocol), FDP (Foundry
151 Discovery Protocol), SONMP (Nortel Discovery Protocol) and EDP
152 (Extreme Discovery Protocol). However, recent versions of IOS should
153 support LLDP and most Extreme stuff support LLDP. When a EDP, CDP or
154 SONMP frame is received on a given interface, lldpd starts sending
155 EDP, CDP, FDP or SONMP frame on this interface. Informations collected
156 through EDP/CDP/FDP/SONMP are integrated with other informations and
157 can be queried with `lldpcli` or through SNMP.
160 * http://en.wikipedia.org/wiki/Link_Layer_Discovery_Protocol
161 * http://standards.ieee.org/getieee802/download/802.1AB-2005.pdf
162 * http://wiki.wireshark.org/LinkLayerDiscoveryProtocol
164 Compatibility with older kernels
165 --------------------------------
167 If you have a kernel older than Linux 2.6.39, you need to compile
168 lldpd with `--enable-oldies` to enable some compatibility functions:
169 otherwise, lldpd will only rely on Netlink to receive bridge, bond and
172 For bonding, you need 2.6.24 (in previous version, PACKET_ORIGDEV
173 affected only non multicast packets). See:
175 * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=80feaacb8a6400a9540a961b6743c69a5896b937
176 * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=8032b46489e50ef8f3992159abd0349b5b8e476c
178 Otherwise, a packet received on a bond will be affected to all
179 interfaces of the bond. In this case, lldpd will affect a received
180 randomly to one of the interface (so a neighbor may be affected to the
183 On 2.6.27, we are able to receive packets on real interface for enslaved
184 devices. This allows one to get neighbor information on active/backup
185 bonds. Without the 2.6.27, lldpd won't receive any information on
186 inactive slaves. Here are the patchs (thanks to Joe Eykholt):
188 * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0d7a3681232f545c6a59f77e60f7667673ef0e93
189 * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=cc9bd5cebc0825e0fabc0186ab85806a0891104f
190 * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f982307f22db96201e41540295f24e8dcc10c78f
192 On FreeBSD, only a recent 9 kernel (9.1 or more recent) will allow to
193 send LLDP frames on enslaved devices. See this bug report for more
196 * http://www.freebsd.org/cgi/query-pr.cgi?pr=138620
198 Some devices (notably Cisco IOS) send frames tagged with the native
199 VLAN while they should send them untagged. If your network card does
200 not support accelerated VLAN, you will receive those frames as long as
201 the corresponding interface exists (see below). However, if your
202 network card handles VLAN encapsulation/decapsulation (check with
203 `ethtool -k`), you need a recent kernel to be able to receive those
204 frames without listening on all available VLAN. Starting from Linux
205 2.6.27, lldpd is able to capture VLAN frames when VLAN acceleration is
206 supported by the network card. Here is the patch:
208 * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bc1d0411b804ad190cdadabac48a10067f17b9e6
210 On some other versions, frames are sent on VLAN 1. If this is not the
211 native VLAN and if your network card support accelerated VLAN, you
212 need to subscribe to this VLAN as well. The Linux kernel does not
213 provide any interface for this. The easiest way is to create the VLAN
216 ip link add link eth0 name eth0.1 type vlan id 1
217 ip link set up dev eth0.1
219 You can check both cases using tcpdump:
221 tcpdump -epni eth0 ether host 01:80:c2:00:00:0e
222 tcpdump -eni eth0 ether host 01:80:c2:00:00:0e
224 If the first command does not display received LLDP packets but the
225 second one does, LLDP packets are likely encapsulated into a VLAN:
227 10:54:06.431154 f0:29:29:1d:7c:01 > 01:80:c2:00:00:0e, ethertype 802.1Q (0x8100), length 363: vlan 1, p 7, ethertype LLDP, LLDP, name SW-APP-D07.VTY, length 345
229 In this case, just create VLAN 1 will fix the situation. There are
232 1. Disable VLAN acceleration on the receive side (`ethtool -K eth0
233 rxvlan off`) but this may or may not work. Check if there are
234 similar properties that could apply with `ethtool -k eth0`.
235 2. Put the interface in promiscuous mode with `ip link set
236 promisc on dev eth0`.
238 The last solution can be done directly by `lldpd` (on Linux only) by
239 using the option `configure system interface promiscuous`.
241 On modern networks, the performance impact should be nonexistent.
246 During development, you may want to execute lldpd at its current
247 location instead of doing `make install`. The correct way to do this is
248 to issue the following command:
250 sudo libtool execute src/daemon/lldpd -L $PWD/src/client/lldpcli -d
252 You can append any further arguments. If lldpd is unable to find
253 `lldpcli` it will start in an unconfigured mode and won't send or
256 You can use [afl](http://lcamtuf.coredump.cx/afl/) to test some
257 aspects of lldpd. To test frame decoding, you can do something like
260 export AFL_USE_ASAN=1 # only on 32bit arch
261 ./configure CC=afl-gcc
266 afl-fuzz -i inputs -o outputs ./decode @@
268 There is a general test suite with `make check`. It's also possible to
269 run integration tests. They need [py.test](http://pytest.org/latest/)
270 and rely on Linux containers to be executed.
272 To enable code coverage, use:
274 ../configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
275 --enable-sanitizers --enable-gcov --with-snmp \
279 # maybe, run integration tests
280 lcov --base-directory $PWD/src/lib \
281 --directory src --capture --output-file gcov.info
282 genhtml gcov.info --output-directory coverage
287 To embed lldpd into an existing system, there are two point of entries:
289 1. If your system does not use standard Linux interface, you can
290 support additional interfaces by implementing the appropriate
291 `struct lldpd_ops`. You can look at
292 `src/daemon/interfaces-linux.c` for examples. Also, have a look at
293 `interfaces_update()` which is responsible for discovering and
294 registering interfaces.
296 2. `lldpcli` provides a convenient way to query `lldpd`. It also
297 comes with various outputs, including XML which allows one to
298 parse its output for integration and automation purpose. Another
299 way is to use SNMP support. A third way is to write your own
300 controller using `liblldpctl.so`. Its API is described in
301 `src/lib/lldpctl.h`. The custom binary protocol between
302 `liblldpctl.so` and `lldpd` is not stable. Therefore, the library
303 should always be shipped with `lldpd`. On the other hand, programs
304 using `liblldpctl.so` can rely on the classic ABI rules.
309 You can use `tcpdump` to look after the packets received and send by
310 `lldpd`. To look after LLDPU, use:
312 tcpdump -s0 -vv -pni eth0 ether dst 01:80:c2:00:00:0e
314 Intel X710 cards may handle LLDP themselves, intercepting any incoming
315 packets. If you don't see anything through `tcpdump`, check if you
316 have such a card (with `lspci`) and stop the embedded LLDP daemon:
318 for f in /sys/kernel/debug/i40e/*/command; do
325 lldpd is distributed under the ISC license:
327 > Permission to use, copy, modify, and/or distribute this software for any
328 > purpose with or without fee is hereby granted, provided that the above
329 > copyright notice and this permission notice appear in all copies.
331 > THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
332 > WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
333 > MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
334 > ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
335 > WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
336 > ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
337 > OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
339 Also, `lldpcli` will be linked to GNU Readline (which is GPL licensed)
340 if available. To avoid this, use `--without-readline` as a configure