]>
Commit | Line | Data |
---|---|---|
52826846 | 1 | .\" -*- nroff -*- |
8431b2b2 | 2 | .TH MDADM 8 "" v2.0m |
52826846 | 3 | .SH NAME |
9a9dab36 | 4 | mdadm \- manage MD devices |
cd29a5c8 NB |
5 | .I aka |
6 | Linux Software Raid. | |
7 | ||
52826846 NB |
8 | .SH SYNOPSIS |
9 | ||
e0d19036 | 10 | .BI mdadm " [mode] <raiddevice> [options] <component-devices>" |
52826846 NB |
11 | |
12 | .SH DESCRIPTION | |
13 | RAID devices are virtual devices created from two or more | |
cd29a5c8 NB |
14 | real block devices. This allows multiple devices (typically disk |
15 | drives or partitions there-of) to be combined into a single device to | |
16 | hold (for example) a single filesystem. | |
2d465520 | 17 | Some RAID levels include redundancy and so can survive some degree of |
cd29a5c8 NB |
18 | device failure. |
19 | ||
2d465520 NB |
20 | Linux Software RAID devices are implemented through the md (Multiple |
21 | Devices) device driver. | |
cd29a5c8 NB |
22 | |
23 | Currently, Linux supports | |
24 | .B LINEAR | |
25 | md devices, | |
26 | .B RAID0 | |
27 | (striping), | |
28 | .B RAID1 | |
29 | (mirroring), | |
d013a55e NB |
30 | .BR RAID4 , |
31 | .BR RAID5 , | |
98c6faba | 32 | .BR RAID6 , |
1a7dfc35 | 33 | .BR RAID10 , |
b5e64645 | 34 | .BR MULTIPATH , |
cd29a5c8 | 35 | and |
b5e64645 | 36 | .BR FAULTY . |
d013a55e | 37 | |
a9d69660 NB |
38 | .B MULTIPATH |
39 | is not a Software RAID mechanism, but does involve | |
d013a55e NB |
40 | multiple devices. For |
41 | .B MULTIPATH | |
42 | each device is a path to one common physical storage device. | |
43 | ||
a9d69660 NB |
44 | .B FAULTY |
45 | is also not true RAID, and it only involves one device. It | |
b5e64645 | 46 | provides a layer over a true device that can be used to inject faults. |
52826846 | 47 | |
a9d69660 NB |
48 | '''.B mdadm |
49 | '''is a program that can be used to create, manage, and monitor | |
50 | '''MD devices. As | |
51 | '''such it provides a similar set of functionality to the | |
52 | '''.B raidtools | |
53 | '''packages. | |
54 | '''The key differences between | |
55 | '''.B mdadm | |
56 | '''and | |
57 | '''.B raidtools | |
58 | '''are: | |
59 | '''.IP \(bu 4 | |
60 | '''.B mdadm | |
61 | '''is a single program and not a collection of programs. | |
62 | '''.IP \(bu 4 | |
63 | '''.B mdadm | |
64 | '''can perform (almost) all of its functions without having a | |
65 | '''configuration file and does not use one by default. Also | |
66 | '''.B mdadm | |
67 | '''helps with management of the configuration | |
68 | '''file. | |
69 | '''.IP \(bu 4 | |
70 | '''.B mdadm | |
71 | '''can provide information about your arrays (through Query, Detail, and Examine) | |
72 | '''that | |
73 | '''.B raidtools | |
74 | '''cannot. | |
75 | '''.P | |
76 | '''.I mdadm | |
77 | '''does not use | |
78 | '''.IR /etc/raidtab , | |
79 | '''the | |
80 | '''.B raidtools | |
81 | '''configuration file, at all. It has a different configuration file | |
82 | '''with a different format and an different purpose. | |
52826846 NB |
83 | |
84 | .SH MODES | |
dd0781e5 | 85 | mdadm has 7 major modes of operation: |
cd29a5c8 NB |
86 | .TP |
87 | .B Assemble | |
88 | Assemble the parts of a previously created | |
52826846 NB |
89 | array into an active array. Components can be explicitly given |
90 | or can be searched for. | |
9a9dab36 | 91 | .B mdadm |
cd29a5c8 NB |
92 | checks that the components |
93 | do form a bona fide array, and can, on request, fiddle superblock | |
94 | information so as to assemble a faulty array. | |
95 | ||
96 | .TP | |
97 | .B Build | |
a9d69660 NB |
98 | Build an array that doesn't have per-device superblocks. For these |
99 | sorts of arrays, | |
100 | .I mdadm | |
101 | cannot differentiate between initial creation and subsequent assembly | |
102 | of an array. It also cannot perform any checks that appropriate | |
103 | devices have been requested. Because of this, the | |
104 | .B Build | |
105 | mode should only be used together with a complete understanding of | |
106 | what you are doing. | |
cd29a5c8 NB |
107 | |
108 | .TP | |
109 | .B Create | |
110 | Create a new array with per-device superblocks. | |
111 | '''It can progress | |
112 | '''in several step create-add-add-run or it can all happen with one command. | |
113 | ||
114 | .TP | |
e0d19036 NB |
115 | .B Manage |
116 | This is for doing things to specific components of an array such as | |
117 | adding new spares and removing faulty devices. | |
cd29a5c8 NB |
118 | |
119 | .TP | |
e0d19036 NB |
120 | .B Misc |
121 | This mode allows operations on independent devices such as examine MD | |
122 | superblocks, erasing old superblocks and stopping active arrays. | |
cd29a5c8 NB |
123 | |
124 | .TP | |
125 | .B "Follow or Monitor" | |
5787fa49 | 126 | Monitor one or more md devices and act on any state changes. This is |
1a7dfc35 | 127 | only meaningful for raid1, 4, 5, 6, 10 or multipath arrays as |
98c6faba NB |
128 | only these have interesting state. raid0 or linear never have |
129 | missing, spare, or failed drives, so there is nothing to monitor. | |
5787fa49 | 130 | |
dd0781e5 NB |
131 | .TP |
132 | .B "Grow" | |
133 | Grow (or shrink) an array, or otherwise reshape it in some way. | |
134 | Currently supported growth options including changing the active size | |
135 | of componenet devices in RAID level 1/4/5/6 and changing the number of | |
136 | active devices in RAID1. | |
cd29a5c8 | 137 | |
52826846 NB |
138 | .SH OPTIONS |
139 | ||
140 | Available options are: | |
141 | ||
cd29a5c8 NB |
142 | .TP |
143 | .BR -A ", " --assemble | |
2d465520 | 144 | Assemble a pre-existing array. |
52826846 | 145 | |
cd29a5c8 NB |
146 | .TP |
147 | .BR -B ", " --build | |
148 | Build a legacy array without superblocks. | |
52826846 | 149 | |
cd29a5c8 NB |
150 | .TP |
151 | .BR -C ", " --create | |
152 | Create a new array. | |
52826846 | 153 | |
e0d19036 NB |
154 | .TP |
155 | .BR -Q ", " --query | |
156 | Examine a device to see | |
157 | (1) if it is an md device and (2) if it is a component of an md | |
158 | array. | |
159 | Information about what is discovered is presented. | |
160 | ||
cd29a5c8 NB |
161 | .TP |
162 | .BR -D ", " --detail | |
163 | Print detail of one or more md devices. | |
52826846 | 164 | |
cd29a5c8 NB |
165 | .TP |
166 | .BR -E ", " --examine | |
167 | Print content of md superblock on device(s). | |
52826846 | 168 | |
cd29a5c8 NB |
169 | .TP |
170 | .BR -F ", " --follow ", " --monitor | |
171 | Select | |
172 | .B Monitor | |
173 | mode. | |
52826846 | 174 | |
dd0781e5 NB |
175 | .TP |
176 | .BR -G ", " --grow | |
177 | Change the size or shape of an active array. | |
178 | ||
e793c2e5 NB |
179 | .TP |
180 | .BR -X ", " --examine-bitmap | |
181 | Report information about a bitmap file. | |
182 | ||
cd29a5c8 NB |
183 | .TP |
184 | .BR -h ", " --help | |
a9d69660 NB |
185 | Display general help message or, after one of the above options, a |
186 | mode specific help message. | |
56eedc1a NB |
187 | |
188 | .TP | |
189 | .B --help-options | |
190 | Display more detailed help about command line parsing and some commonly | |
191 | used options. | |
52826846 | 192 | |
cd29a5c8 NB |
193 | .TP |
194 | .BR -V ", " --version | |
9a9dab36 | 195 | Print version information for mdadm. |
52826846 | 196 | |
cd29a5c8 NB |
197 | .TP |
198 | .BR -v ", " --verbose | |
22892d56 NB |
199 | Be more verbose about what is happening. This can be used twice to be |
200 | extra-verbose. | |
a9d69660 | 201 | The extra verbosity currently only affects |
22892d56 NB |
202 | .B --detail --scan |
203 | and | |
204 | .BR "--examine --scan" . | |
52826846 | 205 | |
dab6685f NB |
206 | .TP |
207 | .BR -q ", " --quiet | |
208 | Avoid printing purely informative messages. With this, | |
209 | .B mdadm | |
210 | will be silent unless there is something really important to report. | |
211 | ||
cd29a5c8 NB |
212 | .TP |
213 | .BR -b ", " --brief | |
214 | Be less verbose. This is used with | |
215 | .B --detail | |
216 | and | |
217 | .BR --examine . | |
22892d56 NB |
218 | Using |
219 | .B --brief | |
220 | with | |
221 | .B --verbose | |
222 | gives an intermediate level of verbosity. | |
52826846 | 223 | |
dfd4d8ee NB |
224 | .TP |
225 | .BR -W ", " --write-mostly | |
226 | subsequent devices lists in a | |
227 | .BR --build , | |
228 | .BR --create , | |
229 | or | |
230 | .B --add | |
231 | command will be flagged as 'write-mostly'. This is valid for RAID1 | |
232 | only and means that the 'md' driver will avoid reading from these | |
233 | devices if at all possible. This can be useful if mirroring over a | |
234 | slow link. | |
235 | ||
e793c2e5 NB |
236 | .TP |
237 | .BR -b ", " --bitmap= | |
238 | Give the name of a bitmap file to use with this array. Can be used | |
fe80f49b NB |
239 | with --create (file should not exist), --assemble (file should |
240 | exist), of --grow (file should not exist). | |
241 | ||
242 | The file | |
243 | .B internal | |
244 | can be used to indicate that the bitmap should be stored in the array, | |
245 | near the superblock. There is a limited amount of space for such | |
246 | bitmaps, but it is often sufficient. | |
247 | ||
248 | The file | |
249 | .B none | |
250 | can be given when used with --grow to remove a bitmap. | |
e793c2e5 NB |
251 | |
252 | .TP | |
253 | .BR --bitmap-chunk= | |
254 | Set the Chunksize of the bitmap. Each bit corresponds to that many | |
255 | Kilobytes of storage. Default is 4. | |
256 | ||
dfd4d8ee NB |
257 | .TP |
258 | .BR --write-behind= | |
259 | Specify that write-behind mode should be enabled (valid for RAID1 | |
260 | only). If an argument is specified, it will set the maximum number | |
261 | of outstanding writes allowed. The default value is 256. | |
262 | A write-intent bitmap is required in order to use write-behind | |
263 | mode, and write-behind is only attempted on drives marked as | |
264 | .IR write-mostly . | |
265 | ||
e793c2e5 | 266 | |
e0d19036 NB |
267 | .TP |
268 | .BR -f ", " --force | |
269 | Be more forceful about certain operations. See the various modes of | |
270 | the exact meaning of this option in different contexts. | |
271 | ||
272 | .TP | |
273 | .BR -c ", " --config= | |
274 | Specify the config file. Default is | |
275 | .BR /etc/mdadm.conf . | |
5787fa49 NB |
276 | If the config file given is |
277 | .B partitions | |
278 | then nothing will be read, but | |
279 | .I mdadm | |
280 | will act as though the config file contained exactly | |
281 | .B "DEVICE partitions" | |
282 | and will read | |
283 | .B /proc/partitions | |
284 | to find a list of devices to scan. | |
d013a55e NB |
285 | If the word |
286 | .B none | |
287 | is given for the config file, then | |
288 | .I mdadm | |
289 | will act as though the config file were empty. | |
e0d19036 NB |
290 | |
291 | .TP | |
292 | .BR -s ", " --scan | |
293 | scan config file or | |
294 | .B /proc/mdstat | |
295 | for missing information. | |
296 | In general, this option gives | |
297 | .B mdadm | |
298 | permission to get any missing information, like component devices, | |
299 | array devices, array identities, and alert destination from the | |
300 | configuration file: | |
301 | .BR /etc/mdadm.conf . | |
302 | One exception is MISC mode when using | |
303 | .B --detail | |
304 | or | |
305 | .B --stop | |
306 | in which case | |
307 | .B --scan | |
308 | says to get a list of array devices from | |
309 | .BR /proc/mdstat . | |
310 | ||
570c0542 NB |
311 | .TP |
312 | .B -e ", " --metadata= | |
313 | Declare the style of superblock (raid metadata) to be used. The | |
314 | default is 0.90 for --create, and to guess for other operations. | |
315 | ||
316 | Options are: | |
317 | .RS | |
318 | .IP "0, 0.90, default" | |
319 | Use the original 0.90 format superblock. This format limits arrays to | |
320 | 28 componenet devices and limits component devices of levels 1 and | |
321 | greater to 2 terabytes. | |
322 | .IP "1, 1.0, 1.1, 1.2" | |
323 | Use the new version-1 format superblock. This has few restrictions. | |
324 | The different subversion store the superblock at different locations | |
325 | on the device, either at the end (for 1.0), at the start (for 1.1) or | |
326 | 4K from the start (for 1.2). | |
327 | .RE | |
328 | ||
cd29a5c8 | 329 | .SH For create or build: |
52826846 | 330 | |
cd29a5c8 NB |
331 | .TP |
332 | .BR -c ", " --chunk= | |
333 | Specify chunk size of kibibytes. The default is 64. | |
52826846 | 334 | |
cd29a5c8 NB |
335 | .TP |
336 | .BR --rounding= | |
337 | Specify rounding factor for linear array (==chunk size) | |
52826846 | 338 | |
cd29a5c8 NB |
339 | .TP |
340 | .BR -l ", " --level= | |
aa88f531 NB |
341 | Set raid level. When used with |
342 | .IR --create , | |
98c6faba | 343 | options are: linear, raid0, 0, stripe, raid1, 1, mirror, raid4, 4, |
1a7dfc35 | 344 | raid5, 5, raid6, 6, raid10, 10, multipath, mp, fautly. Obviously some of these are synonymous. |
aa88f531 NB |
345 | |
346 | When used with | |
347 | .IR --build , | |
a9d69660 | 348 | only linear, stripe, raid0, 0, raid1, multipath, mp, and faulty are valid. |
52826846 | 349 | |
cd29a5c8 | 350 | .TP |
1a7dfc35 NB |
351 | .BR -p ", " --layout= |
352 | This option configures the fine details of data layout for raid5, | |
353 | and raid10 arrays, and controls the failure modes for | |
354 | .IR faulty . | |
355 | ||
356 | The layout of the raid5 parity block can be one of | |
2d465520 NB |
357 | left-asymmetric, |
358 | left-symmetric, | |
359 | right-asymmetric, | |
360 | right-symmetric, | |
361 | la, ra, ls, rs. The default is left-symmetric. | |
52826846 | 362 | |
1a7dfc35 NB |
363 | When setting the failure mode for |
364 | .I faulty | |
365 | the options are: | |
b5e64645 NB |
366 | write-transient, |
367 | wt, | |
368 | read-transient, | |
369 | rt, | |
370 | write-presistent, | |
371 | wp, | |
372 | read-persistent, | |
373 | rp, | |
374 | write-all, | |
375 | read-fixable, | |
376 | rf, | |
377 | clear, | |
378 | flush, | |
379 | none. | |
380 | ||
381 | Each mode can be followed by a number which is used as a period | |
382 | between fault generation. Without a number, the fault is generated | |
383 | once on the first relevant request. With a number, the fault will be | |
384 | generated after that many request, and will continue to be generated | |
385 | every time the period elapses. | |
386 | ||
387 | Multiple failure modes can be current simultaneously by using the | |
388 | "--grow" option to set subsequent failure modes. | |
389 | ||
390 | "clear" or "none" will remove any pending or periodic failure modes, | |
391 | and "flush" will clear any persistant faults. | |
392 | ||
393 | To set the parity with "--grow", the level of the array ("faulty") | |
394 | must be specified before the fault mode is specified. | |
395 | ||
1a7dfc35 NB |
396 | Finally, the layout options for RAID10 are either 'n' or 'p' followed |
397 | by a small number. The default is 'n2'. | |
398 | ||
399 | .I n | |
400 | signals 'near' copies (multiple copies of one data block are at | |
401 | similar offsets in different devices) while | |
402 | .I f | |
403 | signals 'far' copies | |
404 | (multiple copies have very different offsets). See md(4) for more | |
405 | detail about 'near' and 'far'. | |
406 | ||
407 | The number is the number of copies of each datablock. 2 is normal, 3 | |
408 | can be useful. This number can be at most equal to the number of | |
409 | devices in the array. It does not need to divide evenly into that | |
410 | number (e.g. it is perfectly legal to have an 'n2' layout for an array | |
411 | with an odd number of devices). | |
412 | ||
cd29a5c8 | 413 | .TP |
1a7dfc35 NB |
414 | .BR --parity= |
415 | same as --layout (thus explaining the p of | |
416 | .IR -p ). | |
52826846 | 417 | |
e793c2e5 NB |
418 | .TP |
419 | .BR -b ", " --bitmap= | |
420 | Specify a file to store a write-intent bitmap in. The file should not | |
421 | exist unless --force is also given. The same file should be provided | |
422 | when assembling the array. | |
423 | ||
424 | .TP | |
425 | .BR --bitmap-chunk= | |
426 | Specifty the chunksize for the bitmap. | |
427 | ||
cd29a5c8 | 428 | .TP |
b83d95f3 | 429 | .BR -n ", " --raid-devices= |
5787fa49 NB |
430 | Specify the number of active devices in the array. This, plus the |
431 | number of spare devices (see below) must equal the number of | |
432 | .I component-devices | |
d013a55e | 433 | (including "\fBmissing\fP" devices) |
dd0781e5 NB |
434 | that are listed on the command line for |
435 | .BR --create . | |
436 | Setting a value of 1 is probably | |
aa88f531 NB |
437 | a mistake and so requires that |
438 | .B --force | |
439 | be specified first. A value of 1 will then be allowed for linear, | |
440 | multipath, raid0 and raid1. It is never allowed for raid4 or raid5. | |
441 | .br | |
dd0781e5 NB |
442 | This number can only be changed using |
443 | .B --grow | |
444 | for RAID1 arrays, and only on kernels which provide necessary support. | |
cd29a5c8 NB |
445 | |
446 | .TP | |
b83d95f3 | 447 | .BR -x ", " --spare-devices= |
5787fa49 NB |
448 | Specify the number of spare (eXtra) devices in the initial array. |
449 | Spares can also be added | |
450 | and removed later. The number of component devices listed | |
451 | on the command line must equal the number of raid devices plus the | |
452 | number of spare devices. | |
453 | ||
cd29a5c8 NB |
454 | |
455 | .TP | |
456 | .BR -z ", " --size= | |
98c6faba | 457 | Amount (in Kibibytes) of space to use from each drive in RAID1/4/5/6. |
cd29a5c8 NB |
458 | This must be a multiple of the chunk size, and must leave about 128Kb |
459 | of space at the end of the drive for the RAID superblock. | |
460 | If this is not specified | |
461 | (as it normally is not) the smallest drive (or partition) sets the | |
462 | size, though if there is a variance among the drives of greater than 1%, a warning is | |
463 | issued. | |
52826846 | 464 | |
dd0781e5 NB |
465 | This value can be set with |
466 | .B --grow | |
467 | for RAID level 1/4/5/6. If the array was created with a size smaller | |
468 | than the currently active drives, the extra space can be accessed | |
469 | using | |
470 | .BR --grow . | |
779043ef NB |
471 | The size can be given as |
472 | .B max | |
a9d69660 | 473 | which means to choose the largest size that fits on all current drives. |
dd0781e5 NB |
474 | |
475 | .TP | |
476 | .BR --assume-clean | |
477 | Tell | |
478 | .I mdadm | |
479 | that the array pre-existed and is known to be clean. This is only | |
480 | really useful for Building RAID1 array. Only use this if you really | |
481 | know what you are doing. This is currently only supported for --build. | |
482 | ||
947fd4dd NB |
483 | .TP |
484 | .BR -N ", " --name= | |
485 | Set a | |
486 | .B name | |
487 | for the array. This is currently only effective when creating an | |
488 | array with a version-1 superblock. The name is a simple textual | |
489 | string that can be used to identify array components when assembling. | |
490 | ||
dd0781e5 NB |
491 | .TP |
492 | .BR -R ", " --run | |
493 | Insist that | |
494 | .I mdadm | |
495 | run the array, even if some of the components | |
496 | appear to be active in another array or filesystem. Normally | |
497 | .I mdadm | |
498 | will ask for confirmation before including such components in an | |
499 | array. This option causes that question to be suppressed. | |
500 | ||
501 | .TP | |
502 | .BR -f ", " --force | |
503 | Insist that | |
504 | .I mdadm | |
505 | accept the geometry and layout specified without question. Normally | |
506 | .I mdadm | |
507 | will not allow creation of an array with only one device, and will try | |
508 | to create a raid5 array with one missing drive (as this makes the | |
509 | initial resync work faster). With | |
510 | .BR --force , | |
511 | .I mdadm | |
512 | will not try to be so clever. | |
513 | ||
514 | .TP | |
515 | .BR -a ", " "--auto{=no,yes,md,mdp,part,p}{NN}" | |
48f7b27a NB |
516 | Instruct mdadm to create the device file if needed, possibly allocating |
517 | an unused minor number. "md" causes a non-partitionable array | |
dd0781e5 | 518 | to be used. "mdp", "part" or "p" causes a partitionable array (2.6 and |
48f7b27a NB |
519 | later) to be used. "yes" requires the named md device to have a |
520 | 'standard' format, and the type and minor number will be determined | |
521 | from this. See DEVICE NAMES below. | |
522 | ||
a9d69660 | 523 | The argument can also come immediately after |
dd0781e5 NB |
524 | "-a". e.g. "-ap". |
525 | ||
1337546d NB |
526 | If |
527 | .I --scan | |
528 | is also given, then any | |
529 | .I auto= | |
530 | entries in the config file will over-ride the | |
531 | .I --auto | |
532 | instruction given on the command line. | |
533 | ||
dd0781e5 NB |
534 | For partitionable arrays, |
535 | .I mdadm | |
536 | will create the device file for the whole array and for the first 4 | |
537 | partitions. A different number of partitions can be specified at the | |
538 | end of this option (e.g. | |
539 | .BR --auto=p7 ). | |
48f7b27a NB |
540 | If the device name ends with a digit, the partition names add a'p', |
541 | and a number, e.g. "/dev/home1p3". If there is no | |
dd0781e5 NB |
542 | trailing digit, then the partition names just have a number added, |
543 | e.g. "/dev/scratch3". | |
544 | ||
48f7b27a NB |
545 | If the md device name is in a 'standard' format as described in DEVICE |
546 | NAMES, then it will be created, if necessary, with the appropriate | |
547 | number based on that name. If the device name is not in one of these | |
a9d69660 | 548 | formats, then a unused minor number will be allocated. The minor |
48f7b27a NB |
549 | number will be considered unused if there is no active array for that |
550 | number, and there is no entry in /dev for that number and with a | |
551 | non-standard name. | |
552 | ||
52826846 NB |
553 | .SH For assemble: |
554 | ||
cd29a5c8 NB |
555 | .TP |
556 | .BR -u ", " --uuid= | |
557 | uuid of array to assemble. Devices which don't have this uuid are | |
558 | excluded | |
559 | ||
560 | .TP | |
561 | .BR -m ", " --super-minor= | |
562 | Minor number of device that array was created for. Devices which | |
563 | don't have this minor number are excluded. If you create an array as | |
2d465520 | 564 | /dev/md1, then all superblocks will contain the minor number 1, even if |
cd29a5c8 NB |
565 | the array is later assembled as /dev/md2. |
566 | ||
d013a55e NB |
567 | Giving the literal word "dev" for |
568 | .B --super-minor | |
569 | will cause | |
570 | .I mdadm | |
571 | to use the minor number of the md device that is being assembled. | |
572 | e.g. when assembling | |
573 | .BR /dev/md0 , | |
574 | .M --super-minor=dev | |
575 | will look for super blocks with a minor number of 0. | |
576 | ||
947fd4dd NB |
577 | .TP |
578 | .BR -N ", " --name= | |
579 | Specify the name of the array to assemble. This must be the name | |
580 | that was specified when creating the array. | |
581 | ||
cd29a5c8 NB |
582 | .TP |
583 | .BR -f ", " --force | |
52826846 NB |
584 | Assemble the array even if some superblocks appear out-of-date |
585 | ||
cd29a5c8 NB |
586 | .TP |
587 | .BR -R ", " --run | |
588 | Attempt to start the array even if fewer drives were given than are | |
589 | needed for a full array. Normally if not all drives are found and | |
590 | .B --scan | |
591 | is not used, then the array will be assembled but not started. | |
592 | With | |
593 | .B --run | |
594 | an attempt will be made to start it anyway. | |
52826846 | 595 | |
dd0781e5 NB |
596 | .TP |
597 | .BR -a ", " "--auto{=no,yes,md,mdp,part}" | |
598 | See this option under Create and Build options. | |
599 | ||
e793c2e5 NB |
600 | .TP |
601 | .BR -b ", " --bitmap= | |
602 | Specify the bitmap file that was given when the array was created. | |
603 | ||
5787fa49 NB |
604 | .TP |
605 | .BR -U ", " --update= | |
606 | Update the superblock on each device while assembling the array. The | |
feb716e9 NB |
607 | argument given to this flag can be one of |
608 | .BR sparc2.2 , | |
609 | .BR summaries , | |
e5329c37 | 610 | .BR resync , |
586ed405 | 611 | .BR byteorder , |
5787fa49 NB |
612 | or |
613 | .BR super-minor . | |
614 | ||
615 | The | |
616 | .B sparc2.2 | |
617 | option will adjust the superblock of an array what was created on a Sparc | |
618 | machine running a patched 2.2 Linux kernel. This kernel got the | |
619 | alignment of part of the superblock wrong. You can use the | |
620 | .B "--examine --sparc2.2" | |
621 | option to | |
622 | .I mdadm | |
623 | to see what effect this would have. | |
624 | ||
625 | The | |
626 | .B super-minor | |
627 | option will update the | |
628 | .B "prefered minor" | |
629 | field on each superblock to match the minor number of the array being | |
feb716e9 | 630 | assembled. This is not needed on 2.6 and later kernels as they make |
5787fa49 NB |
631 | this adjustment automatically. |
632 | ||
e5329c37 NB |
633 | The |
634 | .B resync | |
635 | option will cause the array to be marked | |
636 | .I dirty | |
637 | meaning that any redundancy in the array (e.g. parity for raid5, | |
638 | copies for raid1) may be incorrect. This will cause the raid system | |
639 | to perform a "resync" pass to make sure that all redundant information | |
640 | is correct. | |
641 | ||
586ed405 NB |
642 | The |
643 | .B byteorder | |
644 | option allows arrays to be moved between machines with different | |
645 | byte-order. | |
646 | When assembling such an array for the first time after a move, giving | |
647 | .B "--update=byteorder" | |
648 | will cause | |
649 | .I mdadm | |
650 | to expect superblocks to have their byteorder reversed, and will | |
651 | correct that order before assembling the array. This is only valid | |
652 | with original (Verion 0.90) superblocks. | |
653 | ||
feb716e9 NB |
654 | The |
655 | .B summaries | |
656 | option will correct the summaries in the superblock. That is the | |
657 | counts of total, working, active, failed, and spare devices. | |
5787fa49 | 658 | |
e0d19036 | 659 | .SH For Manage mode: |
52826846 | 660 | |
cd29a5c8 NB |
661 | .TP |
662 | .BR -a ", " --add | |
663 | '''add, or | |
664 | hotadd listed devices. | |
52826846 | 665 | |
fe80f49b NB |
666 | .TP |
667 | .BR --re-add | |
668 | Listed devices are assumed to have recently been part of the array, | |
669 | and they are re-added. This is only different from --add when a | |
670 | write-intent bitmap is present. It causes only those parts of the | |
671 | device that have changed since the device was removed from the array | |
672 | to be reconstructed. | |
673 | ||
674 | This flag is only needed with arrays that are built without a | |
675 | superblock (i.e. --build, not --create). For array with a superblock, | |
676 | .I mdadm | |
677 | checks if a superblock is present and automatically determines if a | |
678 | re-add is appropriate. | |
679 | ||
cd29a5c8 NB |
680 | .TP |
681 | .BR -r ", " --remove | |
2d465520 | 682 | remove listed devices. They must not be active. i.e. they should |
cd29a5c8 | 683 | be failed or spare devices. |
52826846 | 684 | |
cd29a5c8 NB |
685 | .TP |
686 | .BR -f ", " --fail | |
687 | mark listed devices as faulty. | |
52826846 | 688 | |
cd29a5c8 NB |
689 | .TP |
690 | .BR --set-faulty | |
691 | same as --fail. | |
52826846 | 692 | |
5787fa49 NB |
693 | .SH For Examine mode: |
694 | ||
695 | .TP | |
696 | .B --sparc2.2 | |
a9d69660 | 697 | If an array was created on a 2.2 Linux kernel patched with RAID |
5787fa49 NB |
698 | support, the superblock will have been created incorrectly, or at |
699 | least incompatibly with 2.4 and later kernels. Using the | |
700 | .B --sparc2.2 | |
701 | flag with | |
702 | .B --examine | |
703 | will fix the superblock before displaying it. If this appears to do | |
704 | the right thing, then the array can be successfully assembled using | |
705 | .BR "--assemble --update=sparc2.2" . | |
706 | ||
e0d19036 NB |
707 | .SH For Misc mode: |
708 | ||
cd29a5c8 NB |
709 | .TP |
710 | .BR -R ", " --run | |
711 | start a partially built array. | |
52826846 | 712 | |
cd29a5c8 NB |
713 | .TP |
714 | .BR -S ", " --stop | |
715 | deactivate array, releasing all resources. | |
52826846 | 716 | |
cd29a5c8 NB |
717 | .TP |
718 | .BR -o ", " --readonly | |
719 | mark array as readonly. | |
52826846 | 720 | |
cd29a5c8 NB |
721 | .TP |
722 | .BR -w ", " --readwrite | |
723 | mark array as readwrite. | |
52826846 | 724 | |
e0d19036 NB |
725 | .TP |
726 | .B --zero-superblock | |
727 | If the device contains a valid md superblock, the block is | |
728 | over-written with zeros. With | |
729 | --force | |
730 | the block where the superblock would be is over-written even if it | |
731 | doesn't appear to be valid. | |
52826846 | 732 | |
feb716e9 NB |
733 | .TP |
734 | .BR -t ", " --test | |
735 | When used with | |
736 | .BR --detail , | |
737 | the exit status of | |
738 | .I mdadm | |
739 | is set to reflect the status of the device. | |
740 | ||
e0d19036 NB |
741 | .SH For Monitor mode: |
742 | .TP | |
743 | .BR -m ", " --mail | |
744 | Give a mail address to send alerts to. | |
745 | ||
746 | .TP | |
747 | .BR -p ", " --program ", " --alert | |
748 | Give a program to be run whenever an event is detected. | |
749 | ||
750 | .TP | |
751 | .BR -d ", " --delay | |
752 | Give a delay in seconds. | |
753 | .B mdadm | |
754 | polls the md arrays and then waits this many seconds before polling | |
755 | again. The default is 60 seconds. | |
756 | ||
d013a55e NB |
757 | .TP |
758 | .BR -f ", " --daemonise | |
759 | Tell | |
760 | .B mdadm | |
761 | to run as a background daemon if it decides to monitor anything. This | |
762 | causes it to fork and run in the child, and to disconnect form the | |
763 | terminal. The process id of the child is written to stdout. | |
764 | This is useful with | |
765 | .B --scan | |
766 | which will only continue monitoring if a mail address or alert program | |
767 | is found in the config file. | |
768 | ||
b5e64645 NB |
769 | .TP |
770 | .BR -i ", " --pid-file | |
771 | When | |
772 | .B mdadm | |
773 | is running in daemon mode, write the pid of the daemon process to | |
774 | the specified file, instead of printing it on standard output. | |
775 | ||
aa88f531 NB |
776 | .TP |
777 | .BR -1 ", " --oneshot | |
778 | Check arrays only once. This will generate | |
779 | .B NewArray | |
780 | events and more significantly | |
781 | .B DegradedArray | |
a9d69660 NB |
782 | and |
783 | .B SparesMissing | |
aa88f531 NB |
784 | events. Running |
785 | .in +5 | |
786 | .B " mdadm --monitor --scan -1" | |
787 | .in -5 | |
788 | from a cron script will ensure regular notification of any degraded arrays. | |
789 | ||
98c6faba NB |
790 | .TP |
791 | .BR -t ", " --test | |
792 | Generate a | |
793 | .B TestMessage | |
794 | alert for every array found at startup. This alert gets mailed and | |
795 | passed to the alert program. This can be used for testing that alert | |
a9d69660 | 796 | message do get through successfully. |
98c6faba | 797 | |
e0d19036 | 798 | .SH ASSEMBLE MODE |
52826846 | 799 | |
cd29a5c8 NB |
800 | .HP 12 |
801 | Usage: | |
9a9dab36 | 802 | .B mdadm --assemble |
5787fa49 NB |
803 | .I md-device options-and-component-devices... |
804 | .HP 12 | |
805 | Usage: | |
806 | .B mdadm --assemble --scan | |
807 | .I md-devices-and-options... | |
cd29a5c8 NB |
808 | .HP 12 |
809 | Usage: | |
9a9dab36 | 810 | .B mdadm --assemble --scan |
cd29a5c8 | 811 | .I options... |
52826846 | 812 | |
cd29a5c8 | 813 | .PP |
52826846 | 814 | This usage assembles one or more raid arrays from pre-existing components. |
9a9dab36 | 815 | For each array, mdadm needs to know the md device, the identity of the |
e0d19036 | 816 | array, and a number of component-devices. These can be found in a number of ways. |
52826846 | 817 | |
5787fa49 NB |
818 | In the first usage example (without the |
819 | .BR --scan ) | |
820 | the first device given is the md device. | |
821 | In the second usage example, all devices listed are treated as md | |
822 | devices and assembly is attempted. | |
823 | In the third (where no devices are listed) all md devices that are | |
824 | listed in the configuration file are assembled. | |
52826846 | 825 | |
d013a55e NB |
826 | If precisely one device is listed, but |
827 | .B --scan | |
dd0781e5 | 828 | is not given, then |
d013a55e NB |
829 | .I mdadm |
830 | acts as though | |
831 | .B --scan | |
832 | was given and identify information is extracted from the configuration file. | |
833 | ||
cd29a5c8 | 834 | The identity can be given with the |
52826846 | 835 | .B --uuid |
cd29a5c8 NB |
836 | option, with the |
837 | .B --super-minor | |
5787fa49 | 838 | option, can be found in the config file, or will be taken from the |
e0d19036 | 839 | super block on the first component-device listed on the command line. |
52826846 NB |
840 | |
841 | Devices can be given on the | |
842 | .B --assemble | |
5787fa49 NB |
843 | command line or in the config file. Only devices which have an md |
844 | superblock which contains the right identity will be considered for | |
845 | any array. | |
52826846 NB |
846 | |
847 | The config file is only used if explicitly named with | |
848 | .B --config | |
d013a55e | 849 | or requested with (a possibly implicit) |
52826846 NB |
850 | .B --scan. |
851 | In the later case, | |
9a9dab36 | 852 | .B /etc/mdadm.conf |
52826846 NB |
853 | is used. |
854 | ||
855 | If | |
856 | .B --scan | |
cd29a5c8 NB |
857 | is not given, then the config file will only be used to find the |
858 | identity of md arrays. | |
52826846 | 859 | |
2d465520 | 860 | Normally the array will be started after it is assembled. However if |
cd29a5c8 | 861 | .B --scan |
2d465520 | 862 | is not given and insufficient drives were listed to start a complete |
cd29a5c8 NB |
863 | (non-degraded) array, then the array is not started (to guard against |
864 | usage errors). To insist that the array be started in this case (as | |
1a7dfc35 | 865 | may work for RAID1, 4, 5, 6, or 10), give the |
cd29a5c8 NB |
866 | .B --run |
867 | flag. | |
52826846 | 868 | |
dd0781e5 NB |
869 | If an |
870 | .B auto | |
871 | option is given, either on the command line (--auto) or in the | |
872 | configuration file (e.g. auto=part), then | |
873 | .I mdadm | |
874 | will create the md device if necessary or will re-create it if it | |
875 | doesn't look usable as it is. | |
876 | ||
877 | This can be useful for handling partitioned devices (which don't have | |
878 | a stable device number - it can change after a reboot) and when using | |
879 | "udev" to manage your | |
880 | .B /dev | |
881 | tree (udev cannot handle md devices because of the unusual device | |
882 | initialisation conventions). | |
883 | ||
884 | If the option to "auto" is "mdp" or "part" or (on the command line | |
885 | only) "p", then mdadm will create a partitionable array, using the | |
886 | first free one that is not inuse, and does not already have an entry | |
887 | in /dev (apart from numeric /dev/md* entries). | |
888 | ||
889 | If the option to "auto" is "yes" or "md" or (on the command line) | |
890 | nothing, then mdadm will create a traditional, non-partitionable md | |
891 | array. | |
892 | ||
893 | It is expected that the "auto" functionality will be used to create | |
894 | device entries with meaningful names such as "/dev/md/home" or | |
895 | "/dev/md/root", rather than names based on the numerical array number. | |
896 | ||
897 | When using this option to create a partitionable array, the device | |
898 | files for the first 4 partitions are also created. If a different | |
899 | number is required it can be simply appended to the auto option. | |
900 | e.g. "auto=part8". Partition names are created by appending a digit | |
a9d69660 | 901 | string to the device name, with an intervening "p" if the device name |
dd0781e5 NB |
902 | ends with a digit. |
903 | ||
904 | The | |
905 | .B --auto | |
906 | option is also available in Build and Create modes. As those modes do | |
907 | not use a config file, the "auto=" config option does not apply to | |
908 | these modes. | |
52826846 | 909 | |
cd29a5c8 | 910 | .SH BUILD MODE |
52826846 | 911 | |
cd29a5c8 NB |
912 | .HP 12 |
913 | Usage: | |
9a9dab36 | 914 | .B mdadm --build |
cd29a5c8 NB |
915 | .I device |
916 | .BI --chunk= X | |
917 | .BI --level= Y | |
b83d95f3 | 918 | .BI --raid-devices= Z |
cd29a5c8 NB |
919 | .I devices |
920 | ||
921 | .PP | |
52826846 | 922 | This usage is similar to |
cd29a5c8 | 923 | .BR --create . |
a9d69660 | 924 | The difference is that it creates an array without a superblock. With |
cd29a5c8 | 925 | these arrays there is no difference between initially creating the array and |
52826846 NB |
926 | subsequently assembling the array, except that hopefully there is useful |
927 | data there in the second case. | |
928 | ||
a9d69660 NB |
929 | The level may raid0, linear, multipath, or faulty, or one of their |
930 | synonyms. All devices must be listed and the array will be started | |
931 | once complete. | |
cd29a5c8 NB |
932 | |
933 | .SH CREATE MODE | |
934 | ||
935 | .HP 12 | |
936 | Usage: | |
9a9dab36 | 937 | .B mdadm --create |
cd29a5c8 NB |
938 | .I device |
939 | .BI --chunk= X | |
940 | .BI --level= Y | |
941 | .br | |
b83d95f3 | 942 | .BI --raid-devices= Z |
cd29a5c8 NB |
943 | .I devices |
944 | ||
945 | .PP | |
946 | This usage will initialise a new md array, associate some devices with | |
947 | it, and activate the array. | |
948 | ||
a9d69660 | 949 | If the |
dd0781e5 NB |
950 | .B --auto |
951 | option is given (as described in more detail in the section on | |
952 | Assemble mode), then the md device will be created with a suitable | |
953 | device number if necessary. | |
954 | ||
cd29a5c8 | 955 | As devices are added, they are checked to see if they contain raid |
2d465520 | 956 | superblocks or filesystems. They are also checked to see if the variance in |
cd29a5c8 NB |
957 | device size exceeds 1%. |
958 | ||
959 | If any discrepancy is found, the array will not automatically be run, though | |
960 | the presence of a | |
961 | .B --run | |
962 | can override this caution. | |
963 | ||
2d465520 | 964 | To create a "degraded" array in which some devices are missing, simply |
d013a55e | 965 | give the word "\fBmissing\fP" |
2d465520 NB |
966 | in place of a device name. This will cause |
967 | .B mdadm | |
968 | to leave the corresponding slot in the array empty. | |
969 | For a RAID4 or RAID5 array at most one slot can be | |
98c6faba | 970 | "\fBmissing\fP"; for a RAID6 array at most two slots. |
2d465520 NB |
971 | For a RAID1 array, only one real device needs to be given. All of the |
972 | others can be | |
d013a55e | 973 | "\fBmissing\fP". |
2d465520 | 974 | |
feb716e9 NB |
975 | When creating a RAID5 array, |
976 | .B mdadm | |
977 | will automatically create a degraded array with an extra spare drive. | |
978 | This is because building the spare into a degraded array is in general faster than resyncing | |
979 | the parity on a non-degraded, but not clean, array. This feature can | |
980 | be over-ridden with the | |
b5e64645 | 981 | .I --force |
feb716e9 NB |
982 | option. |
983 | ||
cd29a5c8 NB |
984 | '''If the |
985 | '''.B --size | |
e0d19036 | 986 | '''option is given, it is not necessary to list any component-devices in this command. |
cd29a5c8 NB |
987 | '''They can be added later, before a |
988 | '''.B --run. | |
989 | '''If no | |
990 | '''.B --size | |
991 | '''is given, the apparent size of the smallest drive given is used. | |
992 | ||
993 | The General Management options that are valid with --create are: | |
994 | .TP | |
995 | .B --run | |
dd0781e5 | 996 | insist on running the array even if some devices look like they might |
cd29a5c8 NB |
997 | be in use. |
998 | ||
999 | .TP | |
1000 | .B --readonly | |
1001 | start the array readonly - not supported yet. | |
52826846 | 1002 | |
e0d19036 | 1003 | .SH MANAGE MODE |
cd29a5c8 NB |
1004 | .HP 12 |
1005 | Usage: | |
e0d19036 NB |
1006 | .B mdadm |
1007 | .I device | |
1008 | .I options... devices... | |
cd29a5c8 NB |
1009 | .PP |
1010 | ||
e0d19036 NB |
1011 | This usage will allow individual devices in an array to be failed, |
1012 | removed or added. It is possible to perform multiple operations with | |
1013 | on command. For example: | |
1014 | .br | |
5787fa49 | 1015 | .B " mdadm /dev/md0 -f /dev/hda1 -r /dev/hda1 -a /dev/hda1" |
e0d19036 NB |
1016 | .br |
1017 | will firstly mark | |
1018 | .B /dev/hda1 | |
1019 | as faulty in | |
1020 | .B /dev/md0 | |
1021 | and will then remove it from the array and finally add it back | |
2d465520 | 1022 | in as a spare. However only one md array can be affected by a single |
e0d19036 NB |
1023 | command. |
1024 | ||
1025 | .SH MISC MODE | |
1026 | .HP 12 | |
1027 | Usage: | |
9a9dab36 | 1028 | .B mdadm |
e0d19036 NB |
1029 | .I options ... |
1030 | .I devices ... | |
1031 | .PP | |
cd29a5c8 | 1032 | |
b5e64645 | 1033 | MISC mode includes a number of distinct operations that |
e0d19036 NB |
1034 | operate on distinct devices. The operations are: |
1035 | .TP | |
1036 | --query | |
1037 | The device is examined to see if it is | |
1038 | (1) an active md array, or | |
1039 | (2) a component of an md array. | |
1040 | The information discovered is reported. | |
1041 | ||
1042 | .TP | |
1043 | --detail | |
2d465520 NB |
1044 | The device should be an active md device. |
1045 | .B mdadm | |
1046 | will display a detailed description of the array. | |
cd29a5c8 | 1047 | .B --brief |
2d465520 NB |
1048 | or |
1049 | .B --scan | |
1050 | will cause the output to be less detailed and the format to be | |
e0d19036 | 1051 | suitable for inclusion in |
9a9dab36 | 1052 | .BR /etc/mdadm.conf . |
feb716e9 NB |
1053 | The exit status of |
1054 | .I mdadm | |
1055 | will normally be 0 unless | |
1056 | .I mdadm | |
1057 | failed to get useful information about the device(s). However if the | |
1058 | .B --test | |
1059 | option is given, then the exit status will be: | |
1060 | .RS | |
1061 | .TP | |
1062 | 0 | |
1063 | The array is functioning normally. | |
1064 | .TP | |
1065 | 1 | |
1066 | The array has at least one failed device. | |
1067 | .TP | |
1068 | 2 | |
1069 | The array has multiple failed devices and hence is unusable (raid4 or | |
1070 | raid5). | |
1071 | .TP | |
1072 | 4 | |
1073 | There was an error while trying to get information about the device. | |
1074 | .RE | |
cd29a5c8 | 1075 | |
e0d19036 NB |
1076 | .TP |
1077 | --examine | |
2d465520 NB |
1078 | The device should be a component of an md array. |
1079 | .B mdadm | |
1080 | will read the md superblock of the device and display the contents. | |
e0d19036 NB |
1081 | If |
1082 | .B --brief | |
1083 | is given, or | |
1084 | .B --scan | |
1085 | then multiple devices that are components of the one array | |
1086 | are grouped together and reported in a single entry suitable | |
1087 | for inclusion in | |
1088 | .BR /etc/mdadm.conf . | |
1089 | ||
2d465520 | 1090 | Having |
e0d19036 NB |
1091 | .B --scan |
1092 | without listing any devices will cause all devices listed in the | |
1093 | config file to be examined. | |
1094 | ||
1095 | .TP | |
1096 | --stop | |
98c6faba NB |
1097 | The devices should be active md arrays which will be deactivated, as |
1098 | long as they are not currently in use. | |
e0d19036 NB |
1099 | |
1100 | .TP | |
1101 | --run | |
1102 | This will fully activate a partially assembled md array. | |
1103 | ||
1104 | .TP | |
1105 | --readonly | |
1106 | This will mark an active array as read-only, providing that it is | |
1107 | not currently being used. | |
1108 | ||
1109 | .TP | |
1110 | --readwrite | |
1111 | This will change a | |
1112 | .B readonly | |
1113 | array back to being read/write. | |
1114 | ||
2d465520 NB |
1115 | .TP |
1116 | --scan | |
1117 | For all operations except | |
1118 | .BR --examine , | |
1119 | .B --scan | |
1120 | will cause the operation to be applied to all arrays listed in | |
1121 | .BR /proc/mdstat . | |
1122 | For | |
1123 | .BR --examine, | |
1124 | .B --scan | |
1125 | causes all devices listed in the config file to be examined. | |
1126 | ||
1127 | ||
e0d19036 NB |
1128 | .SH MONITOR MODE |
1129 | ||
cd29a5c8 NB |
1130 | .HP 12 |
1131 | Usage: | |
e0d19036 NB |
1132 | .B mdadm --monitor |
1133 | .I options... devices... | |
1134 | ||
cd29a5c8 | 1135 | .PP |
e0d19036 NB |
1136 | This usage causes |
1137 | .B mdadm | |
1138 | to periodically poll a number of md arrays and to report on any events | |
1139 | noticed. | |
1140 | .B mdadm | |
1141 | will never exit once it decides that there are arrays to be checked, | |
1142 | so it should normally be run in the background. | |
1143 | ||
2d465520 NB |
1144 | As well as reporting events, |
1145 | .B mdadm | |
1146 | may move a spare drive from one array to another if they are in the | |
1147 | same | |
1148 | .B spare-group | |
a9d69660 | 1149 | and if the destination array has a failed drive but no spares. |
2d465520 | 1150 | |
e0d19036 NB |
1151 | If any devices are listed on the command line, |
1152 | .B mdadm | |
1153 | will only monitor those devices. Otherwise all arrays listed in the | |
1154 | configuration file will be monitored. Further, if | |
1155 | .B --scan | |
1156 | is given, then any other md devices that appear in | |
1157 | .B /proc/mdstat | |
1158 | will also be monitored. | |
1159 | ||
1160 | The result of monitoring the arrays is the generation of events. | |
bd526cee | 1161 | These events are passed to a separate program (if specified) and may |
2d465520 | 1162 | be mailed to a given E-mail address. |
e0d19036 | 1163 | |
bd526cee NB |
1164 | When passing event to program, the program is run once for each event |
1165 | and is given 2 or 3 command-line arguements. The first is the | |
1166 | name of the event (see below). The second is the name of the | |
1167 | md device which is affected, and the third is the name of a related | |
1168 | device if relevant, such as a component device that has failed. | |
cd29a5c8 NB |
1169 | |
1170 | If | |
1171 | .B --scan | |
e0d19036 NB |
1172 | is given, then a program or an E-mail address must be specified on the |
1173 | command line or in the config file. If neither are available, then | |
1174 | .B mdadm | |
1175 | will not monitor anything. | |
1176 | Without | |
cd29a5c8 | 1177 | .B --scan |
e0d19036 | 1178 | .B mdadm |
2d465520 | 1179 | will continue monitoring as long as something was found to monitor. If |
e0d19036 NB |
1180 | no program or email is given, then each event is reported to |
1181 | .BR stdout . | |
cd29a5c8 | 1182 | |
e0d19036 NB |
1183 | The different events are: |
1184 | ||
1185 | .RS 4 | |
1186 | .TP | |
1187 | .B DeviceDisappeared | |
2d465520 | 1188 | An md array which previously was configured appears to no longer be |
e0d19036 NB |
1189 | configured. |
1190 | ||
b8f72a62 NB |
1191 | If |
1192 | .I mdadm | |
1193 | was told to monitor an array which is RAID0 or Linear, then it will | |
1194 | report | |
1195 | .B DeviceDisappeared | |
1196 | with the extra information | |
1197 | .BR Wrong-Level . | |
1198 | This is because RAID0 and Linear do not support the device-failed, | |
1199 | hot-spare and resync operations which are monitored. | |
1200 | ||
e0d19036 NB |
1201 | .TP |
1202 | .B RebuildStarted | |
1203 | An md array started reconstruction. | |
1204 | ||
1205 | .TP | |
1206 | .BI Rebuild NN | |
1207 | Where | |
1208 | .I NN | |
1209 | is 20, 40, 60, or 80, this indicates that rebuild has passed that many | |
1210 | percentage of the total. | |
1211 | ||
98c6faba NB |
1212 | .TP |
1213 | .B RebuildFinished | |
1214 | An md array that was rebuilding, isn't any more, either because it | |
1215 | finished normally or was aborted. | |
1216 | ||
e0d19036 NB |
1217 | .TP |
1218 | .B Fail | |
1219 | An active component device of an array has been marked as faulty. | |
1220 | ||
1221 | .TP | |
1222 | .B FailSpare | |
1223 | A spare component device which was being rebuilt to replace a faulty | |
1224 | device has failed. | |
1225 | ||
1226 | .TP | |
1227 | .B SpareActive | |
1228 | A spare component device which was being rebuilt to replace a faulty | |
1229 | device as been successfully rebuild and has been made active. | |
1230 | ||
1231 | .TP | |
1232 | .B NewArray | |
1233 | A new md array has been detected in the | |
1234 | .B /proc/mdstat | |
1235 | file. | |
1236 | ||
aa88f531 NB |
1237 | .TP |
1238 | .B DegradedArray | |
1239 | A newly noticed array appears to be degraded. This message is not | |
1240 | generated when | |
1241 | .I mdadm | |
1242 | notices a drive failure which causes degradation, but only when | |
1243 | .I mdadm | |
1244 | notices that an array is degraded when it first sees the array. | |
1245 | ||
e0d19036 NB |
1246 | .TP |
1247 | .B MoveSpare | |
1248 | A spare drive has been moved from one array in a | |
1249 | .B spare-group | |
1250 | to another to allow a failed drive to be replaced. | |
1251 | ||
b8f72a62 NB |
1252 | .TP |
1253 | .B SparesMissing | |
1254 | If | |
1255 | .I mdadm | |
1256 | has been told, via the config file, that an array should have a certain | |
1257 | number of spare devices, and | |
1258 | .I mdadm | |
1259 | detects that it has fewer that this number when it first sees the | |
1260 | array, it will report a | |
1261 | .B SparesMissing | |
1262 | message. | |
1263 | ||
98c6faba NB |
1264 | .TP |
1265 | .B TestMessage | |
1266 | An array was found at startup, and the | |
1267 | .B --test | |
1268 | flag was given. | |
e0d19036 NB |
1269 | .RE |
1270 | ||
1271 | Only | |
98c6faba NB |
1272 | .B Fail , |
1273 | .B FailSpare , | |
1274 | .B DegradedArray , | |
e0d19036 | 1275 | and |
98c6faba | 1276 | .B TestMessage |
e0d19036 NB |
1277 | cause Email to be sent. All events cause the program to be run. |
1278 | The program is run with two or three arguments, they being the event | |
1279 | name, the array device and possibly a second device. | |
1280 | ||
1281 | Each event has an associated array device (e.g. | |
1282 | .BR /dev/md1 ) | |
1283 | and possibly a second device. For | |
1284 | .BR Fail , | |
1285 | .BR FailSpare , | |
1286 | and | |
1287 | .B SpareActive | |
1288 | the second device is the relevant component device. | |
1289 | For | |
1290 | .B MoveSpare | |
1291 | the second device is the array that the spare was moved from. | |
1292 | ||
1293 | For | |
1294 | .B mdadm | |
1295 | to move spares from one array to another, the different arrays need to | |
1296 | be labelled with the same | |
1297 | .B spare-group | |
1298 | in the configuration file. The | |
1299 | .B spare-group | |
1300 | name can be any string. It is only necessary that different spare | |
2d465520 | 1301 | groups use different names. |
e0d19036 NB |
1302 | |
1303 | When | |
9a9dab36 | 1304 | .B mdadm |
e0d19036 NB |
1305 | detects that an array which is in a spare group has fewer active |
1306 | devices than necessary for the complete array, and has no spare | |
1307 | devices, it will look for another array in the same spare group that | |
1308 | has a full complement of working drive and a spare. It will then | |
1309 | attempt to remove the spare from the second drive and add it to the | |
1310 | first. | |
1311 | If the removal succeeds but the adding fails, then it is added back to | |
1312 | the original array. | |
1313 | ||
dd0781e5 NB |
1314 | .SH GROW MODE |
1315 | The GROW mode is used for changing the size or shape of an active | |
1316 | array. | |
1317 | For this to work, the kernel must support the necessary change. | |
1318 | Various types of growth may be added during 2.6 development, possibly | |
1319 | including restructuring a raid5 array to have more active devices. | |
1320 | ||
dfd4d8ee NB |
1321 | Currently the only support available is to |
1322 | .IP \(bu 4 | |
1323 | change the "size" attribute | |
1324 | for RAID1, RAID5 and RAID6. | |
1325 | .IP \(bu 4 | |
1326 | change the "raid-disks" attribute of RAID1. | |
1327 | .IP \(bu 4 | |
1328 | add a write-intent bitmap to a RAID1 array. | |
1329 | .PP | |
dd0781e5 | 1330 | |
fe80f49b | 1331 | Normally when an array is built the "size" it taken from the smallest |
dd0781e5 NB |
1332 | of the drives. If all the small drives in an arrays are, one at a |
1333 | time, removed and replaced with larger drives, then you could have an | |
1334 | array of large drives with only a small amount used. In this | |
1335 | situation, changing the "size" with "GROW" mode will allow the extra | |
1336 | space to start being used. If the size is increased in this way, a | |
1337 | "resync" process will start to make sure the new parts of the array | |
1338 | are synchronised. | |
1339 | ||
1340 | Note that when an array changes size, any filesystem that may be | |
1341 | stored in the array will not automatically grow to use the space. The | |
1342 | filesystem will need to be explicitly told to use the extra space. | |
1343 | ||
1344 | A RAID1 array can work with any number of devices from 1 upwards | |
1345 | (though 1 is not very useful). There may be times which you want to | |
1346 | increase or decrease the number of active devices. Note that this is | |
1347 | different to hot-add or hot-remove which changes the number of | |
1348 | inactive devices. | |
1349 | ||
1350 | When reducing the number of devices in a RAID1 array, the slots which | |
1351 | are to be removed from the array must already be vacant. That is, the | |
1352 | devices that which were in those slots must be failed and removed. | |
1353 | ||
1354 | When the number of devices is increased, any hot spares that are | |
a9d69660 | 1355 | present will be activated immediately. |
dd0781e5 | 1356 | |
fe80f49b NB |
1357 | A write-intent bitmap can be added to, or remove from, an active RAID1 |
1358 | array. Either internal bitmap, of bitmaps stored in a separate file | |
1359 | can be added. Note that if you add a bitmap stored in a file which is | |
1360 | in a filesystem that is on the raid array being affected, the system | |
1361 | will deadlock. The bitmap must be on a separate filesystem. | |
1362 | ||
2d465520 NB |
1363 | .SH EXAMPLES |
1364 | ||
5787fa49 | 1365 | .B " mdadm --query /dev/name-of-device" |
2d465520 | 1366 | .br |
5787fa49 NB |
1367 | This will find out if a given device is a raid array, or is part of |
1368 | one, and will provide brief information about the device. | |
2d465520 | 1369 | |
5787fa49 | 1370 | .B " mdadm --assemble --scan" |
2d465520 | 1371 | .br |
5787fa49 NB |
1372 | This will assemble and start all arrays listed in the standard confile |
1373 | file. This command will typically go in a system startup file. | |
2d465520 | 1374 | |
2d465520 | 1375 | .B " mdadm --stop --scan" |
5787fa49 NB |
1376 | .br |
1377 | This will shut down all array that can be shut down (i.e. are not | |
19f8b8fc | 1378 | currently in use). This will typically go in a system shutdown script. |
2d465520 | 1379 | |
5787fa49 | 1380 | .B " mdadm --follow --scan --delay=120" |
2d465520 | 1381 | .br |
5787fa49 NB |
1382 | If (and only if) there is an Email address or program given in the |
1383 | standard config file, then | |
1384 | monitor the status of all arrays listed in that file by | |
1385 | polling them ever 2 minutes. | |
2d465520 | 1386 | |
5787fa49 | 1387 | .B " mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/hd[ac]1" |
2d465520 | 1388 | .br |
5787fa49 | 1389 | Create /dev/md0 as a RAID1 array consisting of /dev/hda1 and /dev/hdc1. |
2d465520 | 1390 | |
2d465520 NB |
1391 | .br |
1392 | .B " echo 'DEVICE /dev/hd*[0-9] /dev/sd*[0-9]' > mdadm.conf" | |
1393 | .br | |
1394 | .B " mdadm --detail --scan >> mdadm.conf" | |
1395 | .br | |
5787fa49 NB |
1396 | This will create a prototype config file that describes currently |
1397 | active arrays that are known to be made from partitions of IDE or SCSI drives. | |
2d465520 NB |
1398 | This file should be reviewed before being used as it may |
1399 | contain unwanted detail. | |
1400 | ||
2d465520 NB |
1401 | .B " echo 'DEVICE /dev/hd[a-z] /dev/sd*[a-z]' > mdadm.conf" |
1402 | .br | |
5787fa49 NB |
1403 | .B " mdadm --examine --scan --config=mdadm.conf >> mdadm.conf" |
1404 | .ber | |
1405 | This will find what arrays could be assembled from existign IDE and | |
1406 | SCSI whole drives (not partitions) and store the information is the | |
1407 | format of a config file. | |
2d465520 NB |
1408 | This file is very likely to contain unwanted detail, particularly |
1409 | the | |
1410 | .B devices= | |
5787fa49 NB |
1411 | entries. It should be reviewed and edited before being used as an |
1412 | actual config file. | |
2d465520 | 1413 | |
5787fa49 | 1414 | .B " mdadm --examine --brief --scan --config=partitions" |
2d465520 | 1415 | .br |
5787fa49 NB |
1416 | .B " mdadm -Ebsc partitions" |
1417 | .br | |
1418 | Create a list of devices by reading | |
1419 | .BR /proc/partitions , | |
1420 | scan these for RAID superblocks, and printout a brief listing of all | |
1421 | that was found. | |
2d465520 | 1422 | |
5787fa49 | 1423 | .B " mdadm -Ac partitions -m 0 /dev/md0" |
2d465520 | 1424 | .br |
5787fa49 NB |
1425 | Scan all partitions and devices listed in |
1426 | .BR /proc/partitions | |
1427 | and assemble | |
1428 | .B /dev/md0 | |
1429 | out of all such devices with a RAID superblock with a minor number of 0. | |
2d465520 | 1430 | |
d013a55e NB |
1431 | .B " mdadm --monitor --scan --daemonise > /var/run/mdadm" |
1432 | .br | |
1433 | If config file contains a mail address or alert program, run mdadm in | |
1434 | the background in monitor mode monitoring all md devices. Also write | |
1435 | pid of mdadm daemon to | |
1436 | .BR /var/run/mdadm . | |
1437 | ||
5787fa49 | 1438 | .B " mdadm --create --help" |
2d465520 | 1439 | .br |
5787fa49 | 1440 | Providew help about the Create mode. |
2d465520 | 1441 | |
5787fa49 NB |
1442 | .B " mdadm --config --help" |
1443 | .br | |
1444 | Provide help about the format of the config file. | |
2d465520 | 1445 | |
5787fa49 NB |
1446 | .B " mdadm --help" |
1447 | .br | |
1448 | Provide general help. | |
cd29a5c8 | 1449 | |
cd29a5c8 NB |
1450 | |
1451 | .SH FILES | |
1452 | ||
1453 | .SS /proc/mdstat | |
1454 | ||
1455 | If you're using the | |
1456 | .B /proc | |
1457 | filesystem, | |
1458 | .B /proc/mdstat | |
2d465520 NB |
1459 | lists all active md devices with information about them. |
1460 | .B mdadm | |
1461 | uses this to find arrays when | |
1462 | .B --scan | |
1463 | is given in Misc mode, and to monitor array reconstruction | |
1464 | on Monitor mode. | |
1465 | ||
cd29a5c8 | 1466 | |
9a9dab36 | 1467 | .SS /etc/mdadm.conf |
cd29a5c8 | 1468 | |
11a3e71d NB |
1469 | The config file lists which devices may be scanned to see if |
1470 | they contain MD super block, and gives identifying information | |
1471 | (e.g. UUID) about known MD arrays. See | |
1472 | .BR mdadm.conf (5) | |
1473 | for more details. | |
cd29a5c8 | 1474 | |
48f7b27a NB |
1475 | .SH DEVICE NAMES |
1476 | ||
1477 | While entries in the /dev directory can have any format you like, | |
1478 | .I mdadm | |
1479 | has an understanding of 'standard' formats which it uses to guide its | |
1480 | behaviour when creating device files via the | |
1481 | .I --auto | |
1482 | option. | |
1483 | ||
1484 | The standard names for non-partitioned arrays (the only sort of md | |
1485 | array available in 2.4 and earlier) either of | |
1486 | .IP | |
1487 | /dev/mdNN | |
1488 | .br | |
1489 | /dev/md/NN | |
1490 | .PP | |
1491 | where NN is a number. | |
1492 | The standard names for partitionable arrays (as available from 2.6 | |
1493 | onwards) is one of | |
1494 | .IP | |
1495 | /dev/md/dNN | |
1496 | .br | |
1497 | /dev/md_dNN | |
1498 | .PP | |
1499 | Partition numbers should be indicated by added "pMM" to these, thus "/dev/md/d1p2". | |
52826846 | 1500 | |
2d465520 NB |
1501 | .SH NOTE |
1502 | .B mdadm | |
1503 | was previously known as | |
1504 | .BR mdctl . | |
a9d69660 NB |
1505 | .P |
1506 | .B mdadm | |
1507 | is completely separate from the | |
1508 | .B raidtools | |
1509 | package, and does not use the | |
1510 | .I /etc/raidtab | |
1511 | configuration file at all. | |
1512 | ||
52826846 | 1513 | .SH SEE ALSO |
cd29a5c8 NB |
1514 | For information on the various levels of |
1515 | RAID, check out: | |
1516 | ||
1517 | .IP | |
1518 | .UR http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/ | |
1519 | http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/ | |
1520 | .UE | |
a9d69660 NB |
1521 | '''.PP |
1522 | '''for new releases of the RAID driver check out: | |
1523 | ''' | |
1524 | '''.IP | |
1525 | '''.UR ftp://ftp.kernel.org/pub/linux/kernel/people/mingo/raid-patches | |
1526 | '''ftp://ftp.kernel.org/pub/linux/kernel/people/mingo/raid-patches | |
1527 | '''.UE | |
1528 | '''.PP | |
1529 | '''or | |
1530 | '''.IP | |
1531 | '''.UR http://www.cse.unsw.edu.au/~neilb/patches/linux-stable/ | |
1532 | '''http://www.cse.unsw.edu.au/~neilb/patches/linux-stable/ | |
1533 | '''.UE | |
cd29a5c8 | 1534 | .PP |
a9d69660 NB |
1535 | The lastest version of |
1536 | .I mdadm | |
1537 | should always be available from | |
cd29a5c8 | 1538 | .IP |
a9d69660 NB |
1539 | .UR http://www.kernel.org/pub/linux/utils/raid/mdadm/ |
1540 | http://www.kernel.org/pub/linux/utils/raid/mdadm/ | |
cd29a5c8 NB |
1541 | .UE |
1542 | .PP | |
a9d69660 NB |
1543 | .IR mdadm.conf (5), |
1544 | .IR md (4). | |
56eb10c0 | 1545 | .PP |
52826846 NB |
1546 | .IR raidtab (5), |
1547 | .IR raid0run (8), | |
1548 | .IR raidstop (8), | |
a9d69660 | 1549 | .IR mkraid (8). |