]>
Commit | Line | Data |
---|---|---|
52826846 | 1 | .\" -*- nroff -*- |
90fc992e NB |
2 | ''' Copyright Neil Brown and others. |
3 | ''' This program is free software; you can redistribute it and/or modify | |
4 | ''' it under the terms of the GNU General Public License as published by | |
5 | ''' the Free Software Foundation; either version 2 of the License, or | |
6 | ''' (at your option) any later version. | |
7 | ''' See file COPYING in distribution for details. | |
9255bbc8 | 8 | .TH MDADM 8 "" v2.5.6 |
52826846 | 9 | .SH NAME |
9a9dab36 | 10 | mdadm \- manage MD devices |
cd29a5c8 NB |
11 | .I aka |
12 | Linux Software Raid. | |
13 | ||
52826846 NB |
14 | .SH SYNOPSIS |
15 | ||
e0d19036 | 16 | .BI mdadm " [mode] <raiddevice> [options] <component-devices>" |
52826846 | 17 | |
2ae555c3 | 18 | .SH DESCRIPTION |
52826846 | 19 | RAID devices are virtual devices created from two or more |
cd29a5c8 NB |
20 | real block devices. This allows multiple devices (typically disk |
21 | drives or partitions there-of) to be combined into a single device to | |
22 | hold (for example) a single filesystem. | |
2d465520 | 23 | Some RAID levels include redundancy and so can survive some degree of |
cd29a5c8 NB |
24 | device failure. |
25 | ||
2d465520 NB |
26 | Linux Software RAID devices are implemented through the md (Multiple |
27 | Devices) device driver. | |
cd29a5c8 NB |
28 | |
29 | Currently, Linux supports | |
30 | .B LINEAR | |
31 | md devices, | |
32 | .B RAID0 | |
33 | (striping), | |
34 | .B RAID1 | |
35 | (mirroring), | |
d013a55e NB |
36 | .BR RAID4 , |
37 | .BR RAID5 , | |
98c6faba | 38 | .BR RAID6 , |
1a7dfc35 | 39 | .BR RAID10 , |
b5e64645 | 40 | .BR MULTIPATH , |
cd29a5c8 | 41 | and |
b5e64645 | 42 | .BR FAULTY . |
d013a55e | 43 | |
a9d69660 NB |
44 | .B MULTIPATH |
45 | is not a Software RAID mechanism, but does involve | |
d013a55e NB |
46 | multiple devices. For |
47 | .B MULTIPATH | |
48 | each device is a path to one common physical storage device. | |
49 | ||
a9d69660 NB |
50 | .B FAULTY |
51 | is also not true RAID, and it only involves one device. It | |
b5e64645 | 52 | provides a layer over a true device that can be used to inject faults. |
52826846 | 53 | |
a9d69660 NB |
54 | '''.B mdadm |
55 | '''is a program that can be used to create, manage, and monitor | |
56 | '''MD devices. As | |
57 | '''such it provides a similar set of functionality to the | |
58 | '''.B raidtools | |
59 | '''packages. | |
60 | '''The key differences between | |
61 | '''.B mdadm | |
62 | '''and | |
63 | '''.B raidtools | |
64 | '''are: | |
65 | '''.IP \(bu 4 | |
66 | '''.B mdadm | |
67 | '''is a single program and not a collection of programs. | |
68 | '''.IP \(bu 4 | |
69 | '''.B mdadm | |
70 | '''can perform (almost) all of its functions without having a | |
71 | '''configuration file and does not use one by default. Also | |
72 | '''.B mdadm | |
73 | '''helps with management of the configuration | |
74 | '''file. | |
75 | '''.IP \(bu 4 | |
76 | '''.B mdadm | |
77 | '''can provide information about your arrays (through Query, Detail, and Examine) | |
78 | '''that | |
79 | '''.B raidtools | |
80 | '''cannot. | |
81 | '''.P | |
82 | '''.I mdadm | |
83 | '''does not use | |
84 | '''.IR /etc/raidtab , | |
85 | '''the | |
86 | '''.B raidtools | |
87 | '''configuration file, at all. It has a different configuration file | |
98b24a2a | 88 | '''with a different format and a different purpose. |
52826846 NB |
89 | |
90 | .SH MODES | |
dd0781e5 | 91 | mdadm has 7 major modes of operation: |
cd29a5c8 NB |
92 | .TP |
93 | .B Assemble | |
94 | Assemble the parts of a previously created | |
52826846 | 95 | array into an active array. Components can be explicitly given |
2ae555c3 | 96 | or can be searched for. |
9a9dab36 | 97 | .B mdadm |
cd29a5c8 NB |
98 | checks that the components |
99 | do form a bona fide array, and can, on request, fiddle superblock | |
100 | information so as to assemble a faulty array. | |
101 | ||
102 | .TP | |
103 | .B Build | |
a9d69660 NB |
104 | Build an array that doesn't have per-device superblocks. For these |
105 | sorts of arrays, | |
106 | .I mdadm | |
107 | cannot differentiate between initial creation and subsequent assembly | |
108 | of an array. It also cannot perform any checks that appropriate | |
109 | devices have been requested. Because of this, the | |
110 | .B Build | |
111 | mode should only be used together with a complete understanding of | |
112 | what you are doing. | |
cd29a5c8 NB |
113 | |
114 | .TP | |
115 | .B Create | |
116 | Create a new array with per-device superblocks. | |
117 | '''It can progress | |
118 | '''in several step create-add-add-run or it can all happen with one command. | |
119 | ||
cd29a5c8 NB |
120 | .TP |
121 | .B "Follow or Monitor" | |
5787fa49 | 122 | Monitor one or more md devices and act on any state changes. This is |
1a7dfc35 | 123 | only meaningful for raid1, 4, 5, 6, 10 or multipath arrays as |
98c6faba NB |
124 | only these have interesting state. raid0 or linear never have |
125 | missing, spare, or failed drives, so there is nothing to monitor. | |
5787fa49 | 126 | |
dd0781e5 NB |
127 | .TP |
128 | .B "Grow" | |
129 | Grow (or shrink) an array, or otherwise reshape it in some way. | |
130 | Currently supported growth options including changing the active size | |
2ae555c3 | 131 | of component devices in RAID level 1/4/5/6 and changing the number of |
dd0781e5 | 132 | active devices in RAID1. |
cd29a5c8 | 133 | |
2ae555c3 NB |
134 | .TP |
135 | .B Manage | |
136 | This is for doing things to specific components of an array such as | |
137 | adding new spares and removing faulty devices. | |
138 | ||
139 | .TP | |
140 | .B Misc | |
141 | This is an 'everything else' mode that supports operations on active | |
142 | arrays, operations on component devices such as erasing old superblocks, and | |
143 | information gathering operations. | |
144 | '''This mode allows operations on independent devices such as examine MD | |
145 | '''superblocks, erasing old superblocks and stopping active arrays. | |
146 | ||
52826846 NB |
147 | .SH OPTIONS |
148 | ||
2ae555c3 | 149 | .SH Options for selecting a mode are: |
52826846 | 150 | |
cd29a5c8 NB |
151 | .TP |
152 | .BR -A ", " --assemble | |
2d465520 | 153 | Assemble a pre-existing array. |
52826846 | 154 | |
cd29a5c8 NB |
155 | .TP |
156 | .BR -B ", " --build | |
157 | Build a legacy array without superblocks. | |
52826846 | 158 | |
cd29a5c8 NB |
159 | .TP |
160 | .BR -C ", " --create | |
161 | Create a new array. | |
52826846 | 162 | |
cd29a5c8 NB |
163 | .TP |
164 | .BR -F ", " --follow ", " --monitor | |
165 | Select | |
166 | .B Monitor | |
167 | mode. | |
52826846 | 168 | |
dd0781e5 NB |
169 | .TP |
170 | .BR -G ", " --grow | |
171 | Change the size or shape of an active array. | |
2ae555c3 NB |
172 | .P |
173 | If a device is given before any options, or if the first option is | |
174 | .BR --add , | |
175 | .BR --fail , | |
176 | or | |
177 | .BR --remove , | |
178 | then the MANAGE mode is assume. | |
179 | Anything other than these will cause the | |
180 | .B Misc | |
181 | mode to be assumed. | |
dd0781e5 | 182 | |
2ae555c3 | 183 | .SH Options that are not mode-specific are: |
e793c2e5 | 184 | |
cd29a5c8 NB |
185 | .TP |
186 | .BR -h ", " --help | |
a9d69660 NB |
187 | Display general help message or, after one of the above options, a |
188 | mode specific help message. | |
56eedc1a NB |
189 | |
190 | .TP | |
191 | .B --help-options | |
192 | Display more detailed help about command line parsing and some commonly | |
193 | used options. | |
52826846 | 194 | |
cd29a5c8 NB |
195 | .TP |
196 | .BR -V ", " --version | |
9a9dab36 | 197 | Print version information for mdadm. |
52826846 | 198 | |
cd29a5c8 NB |
199 | .TP |
200 | .BR -v ", " --verbose | |
22892d56 NB |
201 | Be more verbose about what is happening. This can be used twice to be |
202 | extra-verbose. | |
a9d69660 | 203 | The extra verbosity currently only affects |
22892d56 NB |
204 | .B --detail --scan |
205 | and | |
206 | .BR "--examine --scan" . | |
52826846 | 207 | |
dab6685f NB |
208 | .TP |
209 | .BR -q ", " --quiet | |
210 | Avoid printing purely informative messages. With this, | |
211 | .B mdadm | |
212 | will be silent unless there is something really important to report. | |
213 | ||
cd29a5c8 NB |
214 | .TP |
215 | .BR -b ", " --brief | |
216 | Be less verbose. This is used with | |
217 | .B --detail | |
218 | and | |
219 | .BR --examine . | |
22892d56 NB |
220 | Using |
221 | .B --brief | |
222 | with | |
223 | .B --verbose | |
224 | gives an intermediate level of verbosity. | |
52826846 | 225 | |
e0d19036 NB |
226 | .TP |
227 | .BR -f ", " --force | |
228 | Be more forceful about certain operations. See the various modes of | |
229 | the exact meaning of this option in different contexts. | |
230 | ||
231 | .TP | |
232 | .BR -c ", " --config= | |
2ae555c3 NB |
233 | Specify the config file. Default is to use |
234 | .BR /etc/mdadm.conf , | |
235 | or if that is missing, then | |
236 | .BR /etc/mdadm/mdadm.conf . | |
5787fa49 NB |
237 | If the config file given is |
238 | .B partitions | |
239 | then nothing will be read, but | |
240 | .I mdadm | |
241 | will act as though the config file contained exactly | |
242 | .B "DEVICE partitions" | |
243 | and will read | |
244 | .B /proc/partitions | |
245 | to find a list of devices to scan. | |
d013a55e NB |
246 | If the word |
247 | .B none | |
248 | is given for the config file, then | |
249 | .I mdadm | |
250 | will act as though the config file were empty. | |
e0d19036 NB |
251 | |
252 | .TP | |
253 | .BR -s ", " --scan | |
254 | scan config file or | |
255 | .B /proc/mdstat | |
256 | for missing information. | |
257 | In general, this option gives | |
258 | .B mdadm | |
259 | permission to get any missing information, like component devices, | |
260 | array devices, array identities, and alert destination from the | |
261 | configuration file: | |
262 | .BR /etc/mdadm.conf . | |
263 | One exception is MISC mode when using | |
264 | .B --detail | |
265 | or | |
266 | .B --stop | |
267 | in which case | |
268 | .B --scan | |
269 | says to get a list of array devices from | |
270 | .BR /proc/mdstat . | |
271 | ||
570c0542 NB |
272 | .TP |
273 | .B -e ", " --metadata= | |
274 | Declare the style of superblock (raid metadata) to be used. The | |
275 | default is 0.90 for --create, and to guess for other operations. | |
2790ffe3 GB |
276 | The default can be overridden by setting the |
277 | .B metadata | |
278 | value for the | |
279 | .B CREATE | |
280 | keyword in | |
281 | .BR mdadm.conf . | |
570c0542 NB |
282 | |
283 | Options are: | |
284 | .RS | |
285 | .IP "0, 0.90, default" | |
286 | Use the original 0.90 format superblock. This format limits arrays to | |
287 | 28 componenet devices and limits component devices of levels 1 and | |
288 | greater to 2 terabytes. | |
289 | .IP "1, 1.0, 1.1, 1.2" | |
290 | Use the new version-1 format superblock. This has few restrictions. | |
291 | The different subversion store the superblock at different locations | |
292 | on the device, either at the end (for 1.0), at the start (for 1.1) or | |
293 | 4K from the start (for 1.2). | |
294 | .RE | |
295 | ||
41a3b72a NB |
296 | .TP |
297 | .B --homehost= | |
298 | This will over-ride any | |
299 | .B HOMEHOST | |
300 | setting in the config file and provides the identify of the host which | |
301 | should be considered the home for any arrays. | |
302 | ||
303 | When creating an array, the | |
304 | .B homehost | |
305 | will be recorded in the superblock. For version-1 superblocks, it will | |
306 | be prefixed to the array name. For version-0.90 superblocks part of | |
307 | the SHA1 hash of the hostname will be stored in the later half of the | |
308 | UUID. | |
309 | ||
310 | When reporting information about an array, any array which is tagged | |
311 | for the given homehost will be reported as such. | |
312 | ||
313 | When using Auto-Assemble, only arrays tagged for the given homehost | |
314 | will be assembled. | |
315 | ||
2ae555c3 NB |
316 | .SH For create, build, or grow: |
317 | ||
318 | .TP | |
319 | .BR -n ", " --raid-devices= | |
320 | Specify the number of active devices in the array. This, plus the | |
321 | number of spare devices (see below) must equal the number of | |
322 | .I component-devices | |
323 | (including "\fBmissing\fP" devices) | |
324 | that are listed on the command line for | |
325 | .BR --create . | |
326 | Setting a value of 1 is probably | |
327 | a mistake and so requires that | |
328 | .B --force | |
329 | be specified first. A value of 1 will then be allowed for linear, | |
330 | multipath, raid0 and raid1. It is never allowed for raid4 or raid5. | |
331 | .br | |
332 | This number can only be changed using | |
333 | .B --grow | |
334 | for RAID1 arrays, and only on kernels which provide necessary support. | |
335 | ||
336 | .TP | |
337 | .BR -x ", " --spare-devices= | |
338 | Specify the number of spare (eXtra) devices in the initial array. | |
339 | Spares can also be added | |
340 | and removed later. The number of component devices listed | |
341 | on the command line must equal the number of raid devices plus the | |
342 | number of spare devices. | |
343 | ||
344 | ||
345 | .TP | |
346 | .BR -z ", " --size= | |
347 | Amount (in Kibibytes) of space to use from each drive in RAID1/4/5/6. | |
348 | This must be a multiple of the chunk size, and must leave about 128Kb | |
349 | of space at the end of the drive for the RAID superblock. | |
350 | If this is not specified | |
351 | (as it normally is not) the smallest drive (or partition) sets the | |
352 | size, though if there is a variance among the drives of greater than 1%, a warning is | |
353 | issued. | |
354 | ||
355 | This value can be set with | |
356 | .B --grow | |
357 | for RAID level 1/4/5/6. If the array was created with a size smaller | |
358 | than the currently active drives, the extra space can be accessed | |
359 | using | |
360 | .BR --grow . | |
361 | The size can be given as | |
362 | .B max | |
363 | which means to choose the largest size that fits on all current drives. | |
52826846 | 364 | |
cd29a5c8 NB |
365 | .TP |
366 | .BR -c ", " --chunk= | |
367 | Specify chunk size of kibibytes. The default is 64. | |
52826846 | 368 | |
cd29a5c8 NB |
369 | .TP |
370 | .BR --rounding= | |
371 | Specify rounding factor for linear array (==chunk size) | |
52826846 | 372 | |
cd29a5c8 NB |
373 | .TP |
374 | .BR -l ", " --level= | |
aa88f531 NB |
375 | Set raid level. When used with |
376 | .IR --create , | |
98c6faba | 377 | options are: linear, raid0, 0, stripe, raid1, 1, mirror, raid4, 4, |
2ae555c3 | 378 | raid5, 5, raid6, 6, raid10, 10, multipath, mp, faulty. Obviously some of these are synonymous. |
aa88f531 NB |
379 | |
380 | When used with | |
381 | .IR --build , | |
a9d69660 | 382 | only linear, stripe, raid0, 0, raid1, multipath, mp, and faulty are valid. |
52826846 | 383 | |
2ae555c3 NB |
384 | Not yet supported with |
385 | .IR --grow . | |
386 | ||
cd29a5c8 | 387 | .TP |
1a7dfc35 NB |
388 | .BR -p ", " --layout= |
389 | This option configures the fine details of data layout for raid5, | |
390 | and raid10 arrays, and controls the failure modes for | |
391 | .IR faulty . | |
392 | ||
393 | The layout of the raid5 parity block can be one of | |
2d465520 NB |
394 | left-asymmetric, |
395 | left-symmetric, | |
396 | right-asymmetric, | |
397 | right-symmetric, | |
398 | la, ra, ls, rs. The default is left-symmetric. | |
52826846 | 399 | |
1a7dfc35 NB |
400 | When setting the failure mode for |
401 | .I faulty | |
402 | the options are: | |
b5e64645 NB |
403 | write-transient, |
404 | wt, | |
405 | read-transient, | |
406 | rt, | |
2ae555c3 | 407 | write-persistent, |
b5e64645 NB |
408 | wp, |
409 | read-persistent, | |
410 | rp, | |
411 | write-all, | |
412 | read-fixable, | |
413 | rf, | |
414 | clear, | |
415 | flush, | |
416 | none. | |
417 | ||
418 | Each mode can be followed by a number which is used as a period | |
419 | between fault generation. Without a number, the fault is generated | |
420 | once on the first relevant request. With a number, the fault will be | |
421 | generated after that many request, and will continue to be generated | |
422 | every time the period elapses. | |
423 | ||
424 | Multiple failure modes can be current simultaneously by using the | |
425 | "--grow" option to set subsequent failure modes. | |
426 | ||
427 | "clear" or "none" will remove any pending or periodic failure modes, | |
2ae555c3 | 428 | and "flush" will clear any persistent faults. |
b5e64645 NB |
429 | |
430 | To set the parity with "--grow", the level of the array ("faulty") | |
431 | must be specified before the fault mode is specified. | |
432 | ||
b578481c | 433 | Finally, the layout options for RAID10 are one of 'n', 'o' or 'p' followed |
1a7dfc35 NB |
434 | by a small number. The default is 'n2'. |
435 | ||
436 | .I n | |
b578481c NB |
437 | signals 'near' copies. Multiple copies of one data block are at |
438 | similar offsets in different devices. | |
439 | ||
440 | .I o | |
441 | signals 'offset' copies. Rather than the chunks being duplicated | |
442 | within a stripe, whole stripes are duplicated but are rotated by one | |
443 | device so duplicate blocks are on different devices. Thus subsequent | |
444 | copies of a block are in the next drive, and are one chunk further | |
445 | down. | |
446 | ||
1a7dfc35 NB |
447 | .I f |
448 | signals 'far' copies | |
449 | (multiple copies have very different offsets). See md(4) for more | |
450 | detail about 'near' and 'far'. | |
451 | ||
452 | The number is the number of copies of each datablock. 2 is normal, 3 | |
453 | can be useful. This number can be at most equal to the number of | |
454 | devices in the array. It does not need to divide evenly into that | |
455 | number (e.g. it is perfectly legal to have an 'n2' layout for an array | |
456 | with an odd number of devices). | |
457 | ||
cd29a5c8 | 458 | .TP |
1a7dfc35 NB |
459 | .BR --parity= |
460 | same as --layout (thus explaining the p of | |
461 | .IR -p ). | |
52826846 | 462 | |
e793c2e5 NB |
463 | .TP |
464 | .BR -b ", " --bitmap= | |
465 | Specify a file to store a write-intent bitmap in. The file should not | |
466 | exist unless --force is also given. The same file should be provided | |
2ae555c3 NB |
467 | when assembling the array. If the word |
468 | .B internal | |
469 | is given, then the bitmap is stored with the metadata on the array, | |
470 | and so is replicated on all devices. If the word | |
471 | .B none | |
472 | is given with | |
473 | .B --grow | |
474 | mode, then any bitmap that is present is removed. | |
e793c2e5 | 475 | |
2ae555c3 NB |
476 | To help catch typing errors, the filename must contain at least one |
477 | slash ('/') if it is a real file (not 'internal' or 'none'). | |
478 | ||
479 | Note: external bitmaps are only known to work on ext2 and ext3. | |
480 | Storing bitmap files on other filesystems may result in serious problems. | |
e793c2e5 | 481 | |
cd29a5c8 | 482 | .TP |
2ae555c3 NB |
483 | .BR --bitmap-chunk= |
484 | Set the chunksize of the bitmap. Each bit corresponds to that many | |
1bfdbe01 NB |
485 | Kilobytes of storage. |
486 | When using a file based bitmap, the default is to use the smallest | |
487 | size that is atleast 4 and requires no more than 2^21 chunks. | |
2ae555c3 NB |
488 | When using an |
489 | .B internal | |
490 | bitmap, the chunksize is automatically determined to make best use of | |
491 | available space. | |
5787fa49 | 492 | |
cd29a5c8 NB |
493 | |
494 | .TP | |
2ae555c3 NB |
495 | .BR -W ", " --write-mostly |
496 | subsequent devices lists in a | |
497 | .BR --build , | |
498 | .BR --create , | |
499 | or | |
500 | .B --add | |
501 | command will be flagged as 'write-mostly'. This is valid for RAID1 | |
502 | only and means that the 'md' driver will avoid reading from these | |
503 | devices if at all possible. This can be useful if mirroring over a | |
504 | slow link. | |
52826846 | 505 | |
2ae555c3 NB |
506 | .TP |
507 | .BR --write-behind= | |
508 | Specify that write-behind mode should be enabled (valid for RAID1 | |
509 | only). If an argument is specified, it will set the maximum number | |
510 | of outstanding writes allowed. The default value is 256. | |
511 | A write-intent bitmap is required in order to use write-behind | |
512 | mode, and write-behind is only attempted on drives marked as | |
513 | .IR write-mostly . | |
dd0781e5 NB |
514 | |
515 | .TP | |
516 | .BR --assume-clean | |
517 | Tell | |
518 | .I mdadm | |
47d79ef8 NB |
519 | that the array pre-existed and is known to be clean. It can be useful |
520 | when trying to recover from a major failure as you can be sure that no | |
521 | data will be affected unless you actually write to the array. It can | |
522 | also be used when creating a RAID1 or RAID10 if you want to avoid the | |
523 | initial resync, however this practice - while normally safe - is not | |
524 | recommended. Use this ony if you really know what you are doing. | |
dd0781e5 | 525 | |
2ae555c3 NB |
526 | .TP |
527 | .BR --backup-file= | |
528 | This is needed when --grow is used to increase the number of | |
529 | raid-devices in a RAID5 if there are no spare devices available. | |
530 | See the section below on RAID_DEVICE CHANGES. The file should be | |
531 | stored on a separate device, not on the raid array being reshaped. | |
532 | ||
947fd4dd NB |
533 | .TP |
534 | .BR -N ", " --name= | |
535 | Set a | |
536 | .B name | |
537 | for the array. This is currently only effective when creating an | |
538 | array with a version-1 superblock. The name is a simple textual | |
539 | string that can be used to identify array components when assembling. | |
540 | ||
dd0781e5 NB |
541 | .TP |
542 | .BR -R ", " --run | |
543 | Insist that | |
544 | .I mdadm | |
545 | run the array, even if some of the components | |
546 | appear to be active in another array or filesystem. Normally | |
547 | .I mdadm | |
548 | will ask for confirmation before including such components in an | |
549 | array. This option causes that question to be suppressed. | |
550 | ||
551 | .TP | |
552 | .BR -f ", " --force | |
553 | Insist that | |
554 | .I mdadm | |
555 | accept the geometry and layout specified without question. Normally | |
556 | .I mdadm | |
557 | will not allow creation of an array with only one device, and will try | |
558 | to create a raid5 array with one missing drive (as this makes the | |
559 | initial resync work faster). With | |
560 | .BR --force , | |
561 | .I mdadm | |
562 | will not try to be so clever. | |
563 | ||
564 | .TP | |
565 | .BR -a ", " "--auto{=no,yes,md,mdp,part,p}{NN}" | |
48f7b27a NB |
566 | Instruct mdadm to create the device file if needed, possibly allocating |
567 | an unused minor number. "md" causes a non-partitionable array | |
dd0781e5 | 568 | to be used. "mdp", "part" or "p" causes a partitionable array (2.6 and |
2ae555c3 | 569 | later) to be used. "yes" requires the named md device to have |
f9c25f1d | 570 | a 'standard' format, and the type and minor number will be determined |
48f7b27a NB |
571 | from this. See DEVICE NAMES below. |
572 | ||
a9d69660 | 573 | The argument can also come immediately after |
dd0781e5 NB |
574 | "-a". e.g. "-ap". |
575 | ||
75723446 NB |
576 | If --auto is not given on the command line or in the config file, then |
577 | the default will be | |
578 | .BR --auto=yes . | |
579 | ||
1337546d NB |
580 | If |
581 | .I --scan | |
582 | is also given, then any | |
583 | .I auto= | |
584 | entries in the config file will over-ride the | |
585 | .I --auto | |
586 | instruction given on the command line. | |
587 | ||
dd0781e5 NB |
588 | For partitionable arrays, |
589 | .I mdadm | |
590 | will create the device file for the whole array and for the first 4 | |
591 | partitions. A different number of partitions can be specified at the | |
592 | end of this option (e.g. | |
593 | .BR --auto=p7 ). | |
2ae555c3 | 594 | If the device name ends with a digit, the partition names add a 'p', |
48f7b27a | 595 | and a number, e.g. "/dev/home1p3". If there is no |
dd0781e5 NB |
596 | trailing digit, then the partition names just have a number added, |
597 | e.g. "/dev/scratch3". | |
598 | ||
48f7b27a NB |
599 | If the md device name is in a 'standard' format as described in DEVICE |
600 | NAMES, then it will be created, if necessary, with the appropriate | |
601 | number based on that name. If the device name is not in one of these | |
a9d69660 | 602 | formats, then a unused minor number will be allocated. The minor |
48f7b27a NB |
603 | number will be considered unused if there is no active array for that |
604 | number, and there is no entry in /dev for that number and with a | |
605 | non-standard name. | |
606 | ||
38098016 NB |
607 | .TP |
608 | .BR --symlink = no | |
609 | Normally when | |
610 | .B --auto | |
611 | causes | |
612 | .I mdadm | |
613 | to create devices in | |
614 | .B /dev/md/ | |
615 | it will also create symlinks from | |
616 | .B /dev/ | |
617 | with names starting with | |
618 | .B md | |
619 | or | |
620 | .BR md_ . | |
621 | Use | |
622 | .B --symlink=no | |
623 | to suppress this, or | |
624 | .B --symlink=yes | |
625 | to enforce this even if it is suppressing | |
626 | .IR mdadm.conf . | |
627 | ||
628 | ||
52826846 NB |
629 | .SH For assemble: |
630 | ||
cd29a5c8 NB |
631 | .TP |
632 | .BR -u ", " --uuid= | |
633 | uuid of array to assemble. Devices which don't have this uuid are | |
634 | excluded | |
635 | ||
636 | .TP | |
637 | .BR -m ", " --super-minor= | |
638 | Minor number of device that array was created for. Devices which | |
639 | don't have this minor number are excluded. If you create an array as | |
2d465520 | 640 | /dev/md1, then all superblocks will contain the minor number 1, even if |
cd29a5c8 NB |
641 | the array is later assembled as /dev/md2. |
642 | ||
d013a55e NB |
643 | Giving the literal word "dev" for |
644 | .B --super-minor | |
645 | will cause | |
646 | .I mdadm | |
647 | to use the minor number of the md device that is being assembled. | |
648 | e.g. when assembling | |
649 | .BR /dev/md0 , | |
650 | .M --super-minor=dev | |
651 | will look for super blocks with a minor number of 0. | |
652 | ||
947fd4dd NB |
653 | .TP |
654 | .BR -N ", " --name= | |
655 | Specify the name of the array to assemble. This must be the name | |
624920bb NB |
656 | that was specified when creating the array. It must either match |
657 | then name stored in the superblock exactly, or it must match | |
41a3b72a | 658 | with the current |
624920bb NB |
659 | .I homehost |
660 | is added to the start of the given name. | |
947fd4dd | 661 | |
cd29a5c8 NB |
662 | .TP |
663 | .BR -f ", " --force | |
52826846 NB |
664 | Assemble the array even if some superblocks appear out-of-date |
665 | ||
cd29a5c8 NB |
666 | .TP |
667 | .BR -R ", " --run | |
b8a8ccf9 NB |
668 | Attempt to start the array even if fewer drives were given than were |
669 | present last time the array was active. Normally if not all the | |
670 | expected drives are found and | |
cd29a5c8 NB |
671 | .B --scan |
672 | is not used, then the array will be assembled but not started. | |
673 | With | |
674 | .B --run | |
675 | an attempt will be made to start it anyway. | |
52826846 | 676 | |
b8a8ccf9 NB |
677 | .TP |
678 | .B --no-degraded | |
679 | This is the reverse of | |
680 | .B --run | |
681 | in that it inhibits the started if array unless all expected drives | |
682 | are present. This is only needed with | |
683 | .B --scan | |
684 | and can be used if you physical connections to devices are | |
685 | not as reliable as you would like. | |
686 | ||
dd0781e5 NB |
687 | .TP |
688 | .BR -a ", " "--auto{=no,yes,md,mdp,part}" | |
689 | See this option under Create and Build options. | |
690 | ||
e793c2e5 NB |
691 | .TP |
692 | .BR -b ", " --bitmap= | |
2ae555c3 NB |
693 | Specify the bitmap file that was given when the array was created. If |
694 | an array has an | |
695 | .B internal | |
696 | bitmap, there is no need to specify this when assembling the array. | |
697 | ||
698 | .TP | |
699 | .BR --backup-file= | |
700 | If | |
701 | .B --backup-file | |
702 | was used to grow the number of raid-devices in a RAID5, and the system | |
703 | crashed during the critical section, then the same | |
704 | .B --backup-file | |
705 | must be presented to --assemble to allow possibly corrupted data to be | |
706 | restored. | |
e793c2e5 | 707 | |
5787fa49 NB |
708 | .TP |
709 | .BR -U ", " --update= | |
710 | Update the superblock on each device while assembling the array. The | |
feb716e9 NB |
711 | argument given to this flag can be one of |
712 | .BR sparc2.2 , | |
713 | .BR summaries , | |
7d99579f | 714 | .BR uuid , |
c4f12c13 | 715 | .BR name , |
0237e0ca | 716 | .BR homehost , |
e5329c37 | 717 | .BR resync , |
586ed405 | 718 | .BR byteorder , |
bee8ec56 | 719 | .BR devicesize , |
5787fa49 NB |
720 | or |
721 | .BR super-minor . | |
722 | ||
723 | The | |
724 | .B sparc2.2 | |
7d99579f | 725 | option will adjust the superblock of an array what was created on a Sparc |
5787fa49 NB |
726 | machine running a patched 2.2 Linux kernel. This kernel got the |
727 | alignment of part of the superblock wrong. You can use the | |
728 | .B "--examine --sparc2.2" | |
729 | option to | |
730 | .I mdadm | |
731 | to see what effect this would have. | |
732 | ||
733 | The | |
734 | .B super-minor | |
735 | option will update the | |
2ae555c3 | 736 | .B "preferred minor" |
5787fa49 | 737 | field on each superblock to match the minor number of the array being |
45c073c9 NB |
738 | assembled. |
739 | This can be useful if | |
740 | .B --examine | |
741 | reports a different "Preferred Minor" to | |
742 | .BR --detail . | |
743 | In some cases this update will be performed automatically | |
744 | by the kernel driver. In particular the update happens automatically | |
745 | at the first write to an array with redundancy (RAID level 1 or | |
746 | greater) on a 2.6 (or later) kernel. | |
5787fa49 | 747 | |
7d99579f NB |
748 | The |
749 | .B uuid | |
750 | option will change the uuid of the array. If a UUID is given with the | |
38dbfd8a | 751 | "--uuid" option that UUID will be used as a new UUID and will |
7d99579f NB |
752 | .B NOT |
753 | be used to help identify the devices in the array. | |
754 | If no "--uuid" is given, a random uuid is chosen. | |
755 | ||
c4f12c13 NB |
756 | The |
757 | .B name | |
758 | option will change the | |
759 | .I name | |
760 | of the array as stored in the superblock. This is only supported for | |
761 | version-1 superblocks. | |
762 | ||
0237e0ca NB |
763 | The |
764 | .B homehost | |
765 | option will change the | |
766 | .I homehost | |
767 | as recorded in the superblock. For version-0 superblocks, this is the | |
768 | same as updating the UUID. | |
769 | For version-1 superblocks, this involves updating the name. | |
770 | ||
e5329c37 NB |
771 | The |
772 | .B resync | |
773 | option will cause the array to be marked | |
774 | .I dirty | |
775 | meaning that any redundancy in the array (e.g. parity for raid5, | |
776 | copies for raid1) may be incorrect. This will cause the raid system | |
777 | to perform a "resync" pass to make sure that all redundant information | |
778 | is correct. | |
779 | ||
586ed405 NB |
780 | The |
781 | .B byteorder | |
782 | option allows arrays to be moved between machines with different | |
783 | byte-order. | |
2ae555c3 | 784 | When assembling such an array for the first time after a move, giving |
586ed405 NB |
785 | .B "--update=byteorder" |
786 | will cause | |
787 | .I mdadm | |
788 | to expect superblocks to have their byteorder reversed, and will | |
789 | correct that order before assembling the array. This is only valid | |
2ae555c3 | 790 | with original (Version 0.90) superblocks. |
586ed405 | 791 | |
feb716e9 NB |
792 | The |
793 | .B summaries | |
794 | option will correct the summaries in the superblock. That is the | |
795 | counts of total, working, active, failed, and spare devices. | |
5787fa49 | 796 | |
bee8ec56 NB |
797 | The |
798 | .B devicesize | |
799 | will rarely be of use. It applies to version 1.1 and 1.2 metadata | |
800 | only (where the metadata is at the start of the device) and is only | |
801 | useful when the component device has changed size (typically become | |
802 | larger). The version 1 metadata records the amount of the device that | |
803 | can be used to store data, so if a device in a version 1.1 or 1.2 | |
804 | array becomes larger, the metadata will still be visible, but the | |
805 | extra space will not. In this case it might be useful to assemble the | |
806 | array with | |
807 | .BR --update=devicesize . | |
808 | This will cause | |
809 | .I mdadm | |
810 | to determine the maximum usable amount of space on each device and | |
811 | update the relevant field in the metadata. | |
812 | ||
41a3b72a NB |
813 | .TP |
814 | .B --auto-update-homehost | |
815 | This flag is only meaning with auto-assembly (see discussion below). | |
816 | In that situation, if no suitable arrays are found for this homehost, | |
817 | .I mdadm | |
818 | will recan for any arrays at all and will assemble them and update the | |
819 | homehost to match the current host. | |
820 | ||
e0d19036 | 821 | .SH For Manage mode: |
52826846 | 822 | |
cd29a5c8 NB |
823 | .TP |
824 | .BR -a ", " --add | |
2ae555c3 | 825 | hot-add listed devices. |
52826846 | 826 | |
fe80f49b NB |
827 | .TP |
828 | .BR --re-add | |
2ae555c3 | 829 | re-add a device that was recently removed from an array. |
fe80f49b | 830 | |
cd29a5c8 NB |
831 | .TP |
832 | .BR -r ", " --remove | |
2d465520 | 833 | remove listed devices. They must not be active. i.e. they should |
cd29a5c8 | 834 | be failed or spare devices. |
52826846 | 835 | |
cd29a5c8 NB |
836 | .TP |
837 | .BR -f ", " --fail | |
838 | mark listed devices as faulty. | |
52826846 | 839 | |
cd29a5c8 NB |
840 | .TP |
841 | .BR --set-faulty | |
842 | same as --fail. | |
52826846 | 843 | |
2ae555c3 NB |
844 | .P |
845 | Each of these options require that the first device list is the array | |
846 | to be acted upon and the remainder are component devices to be added, | |
847 | removed, or marked as fault. Several different operations can be | |
848 | specified for different devices, e.g. | |
849 | .in +5 | |
850 | mdadm /dev/md0 --add /dev/sda1 --fail /dev/sdb1 --remove /dev/sdb1 | |
851 | .in -5 | |
852 | Each operation applies to all devices listed until the next | |
853 | operations. | |
854 | ||
855 | If an array is using a write-intent bitmap, then devices which have | |
856 | been removed can be re-added in a way that avoids a full | |
857 | reconstruction but instead just updated the blocks that have changed | |
858 | since the device was removed. For arrays with persistent metadata | |
859 | (superblocks) this is done automatically. For arrays created with | |
860 | .B --build | |
861 | mdadm needs to be told that this device we removed recently with | |
862 | .B --re-add. | |
863 | ||
864 | Devices can only be removed from an array if they are not in active | |
865 | use. i.e. that must be spares or failed devices. To remove an active | |
866 | device, it must be marked as | |
867 | .B faulty | |
868 | first. | |
869 | ||
870 | .SH For Misc mode: | |
871 | ||
872 | .TP | |
873 | .BR -Q ", " --query | |
874 | Examine a device to see | |
875 | (1) if it is an md device and (2) if it is a component of an md | |
876 | array. | |
877 | Information about what is discovered is presented. | |
878 | ||
879 | .TP | |
880 | .BR -D ", " --detail | |
881 | Print detail of one or more md devices. | |
5787fa49 | 882 | |
2ae555c3 NB |
883 | .TP |
884 | .BR -E ", " --examine | |
885 | Print content of md superblock on device(s). | |
5787fa49 NB |
886 | .TP |
887 | .B --sparc2.2 | |
a9d69660 | 888 | If an array was created on a 2.2 Linux kernel patched with RAID |
5787fa49 NB |
889 | support, the superblock will have been created incorrectly, or at |
890 | least incompatibly with 2.4 and later kernels. Using the | |
891 | .B --sparc2.2 | |
892 | flag with | |
893 | .B --examine | |
894 | will fix the superblock before displaying it. If this appears to do | |
895 | the right thing, then the array can be successfully assembled using | |
896 | .BR "--assemble --update=sparc2.2" . | |
897 | ||
2ae555c3 NB |
898 | .TP |
899 | .BR -X ", " --examine-bitmap | |
900 | Report information about a bitmap file. | |
e0d19036 | 901 | |
cd29a5c8 NB |
902 | .TP |
903 | .BR -R ", " --run | |
904 | start a partially built array. | |
52826846 | 905 | |
cd29a5c8 NB |
906 | .TP |
907 | .BR -S ", " --stop | |
908 | deactivate array, releasing all resources. | |
52826846 | 909 | |
cd29a5c8 NB |
910 | .TP |
911 | .BR -o ", " --readonly | |
912 | mark array as readonly. | |
52826846 | 913 | |
cd29a5c8 NB |
914 | .TP |
915 | .BR -w ", " --readwrite | |
916 | mark array as readwrite. | |
52826846 | 917 | |
e0d19036 NB |
918 | .TP |
919 | .B --zero-superblock | |
920 | If the device contains a valid md superblock, the block is | |
921 | over-written with zeros. With | |
922 | --force | |
923 | the block where the superblock would be is over-written even if it | |
924 | doesn't appear to be valid. | |
52826846 | 925 | |
feb716e9 NB |
926 | .TP |
927 | .BR -t ", " --test | |
928 | When used with | |
929 | .BR --detail , | |
930 | the exit status of | |
931 | .I mdadm | |
932 | is set to reflect the status of the device. | |
933 | ||
b90c0e9a NB |
934 | .TP |
935 | .BR -W ", " --wait | |
936 | For each md device given, wait for any resync, recovery, or reshape | |
937 | activity to finish before returning. | |
938 | .I mdadm | |
939 | will return with success if it actually waited for every device | |
940 | listed, otherwise it will return failure. | |
941 | ||
e0d19036 NB |
942 | .SH For Monitor mode: |
943 | .TP | |
944 | .BR -m ", " --mail | |
945 | Give a mail address to send alerts to. | |
946 | ||
947 | .TP | |
948 | .BR -p ", " --program ", " --alert | |
949 | Give a program to be run whenever an event is detected. | |
950 | ||
773135f5 NB |
951 | .TP |
952 | .BR -y ", " --syslog | |
953 | Cause all events to be reported through 'syslog'. The messages have | |
954 | facility of 'daemon' and varying priorities. | |
955 | ||
e0d19036 NB |
956 | .TP |
957 | .BR -d ", " --delay | |
958 | Give a delay in seconds. | |
959 | .B mdadm | |
960 | polls the md arrays and then waits this many seconds before polling | |
961 | again. The default is 60 seconds. | |
962 | ||
d013a55e NB |
963 | .TP |
964 | .BR -f ", " --daemonise | |
965 | Tell | |
966 | .B mdadm | |
967 | to run as a background daemon if it decides to monitor anything. This | |
968 | causes it to fork and run in the child, and to disconnect form the | |
969 | terminal. The process id of the child is written to stdout. | |
970 | This is useful with | |
971 | .B --scan | |
972 | which will only continue monitoring if a mail address or alert program | |
973 | is found in the config file. | |
974 | ||
b5e64645 NB |
975 | .TP |
976 | .BR -i ", " --pid-file | |
977 | When | |
978 | .B mdadm | |
979 | is running in daemon mode, write the pid of the daemon process to | |
980 | the specified file, instead of printing it on standard output. | |
981 | ||
aa88f531 NB |
982 | .TP |
983 | .BR -1 ", " --oneshot | |
984 | Check arrays only once. This will generate | |
985 | .B NewArray | |
986 | events and more significantly | |
987 | .B DegradedArray | |
a9d69660 NB |
988 | and |
989 | .B SparesMissing | |
aa88f531 NB |
990 | events. Running |
991 | .in +5 | |
992 | .B " mdadm --monitor --scan -1" | |
993 | .in -5 | |
994 | from a cron script will ensure regular notification of any degraded arrays. | |
995 | ||
98c6faba NB |
996 | .TP |
997 | .BR -t ", " --test | |
998 | Generate a | |
999 | .B TestMessage | |
1000 | alert for every array found at startup. This alert gets mailed and | |
1001 | passed to the alert program. This can be used for testing that alert | |
a9d69660 | 1002 | message do get through successfully. |
98c6faba | 1003 | |
e0d19036 | 1004 | .SH ASSEMBLE MODE |
52826846 | 1005 | |
cd29a5c8 NB |
1006 | .HP 12 |
1007 | Usage: | |
9a9dab36 | 1008 | .B mdadm --assemble |
5787fa49 NB |
1009 | .I md-device options-and-component-devices... |
1010 | .HP 12 | |
1011 | Usage: | |
1012 | .B mdadm --assemble --scan | |
1013 | .I md-devices-and-options... | |
cd29a5c8 NB |
1014 | .HP 12 |
1015 | Usage: | |
9a9dab36 | 1016 | .B mdadm --assemble --scan |
cd29a5c8 | 1017 | .I options... |
52826846 | 1018 | |
cd29a5c8 | 1019 | .PP |
52826846 | 1020 | This usage assembles one or more raid arrays from pre-existing components. |
9a9dab36 | 1021 | For each array, mdadm needs to know the md device, the identity of the |
e0d19036 | 1022 | array, and a number of component-devices. These can be found in a number of ways. |
52826846 | 1023 | |
5787fa49 NB |
1024 | In the first usage example (without the |
1025 | .BR --scan ) | |
1026 | the first device given is the md device. | |
1027 | In the second usage example, all devices listed are treated as md | |
1028 | devices and assembly is attempted. | |
1029 | In the third (where no devices are listed) all md devices that are | |
1030 | listed in the configuration file are assembled. | |
52826846 | 1031 | |
d013a55e NB |
1032 | If precisely one device is listed, but |
1033 | .B --scan | |
dd0781e5 | 1034 | is not given, then |
d013a55e NB |
1035 | .I mdadm |
1036 | acts as though | |
1037 | .B --scan | |
1038 | was given and identify information is extracted from the configuration file. | |
1039 | ||
2ae555c3 | 1040 | The identity can be given with the |
52826846 | 1041 | .B --uuid |
cd29a5c8 NB |
1042 | option, with the |
1043 | .B --super-minor | |
5787fa49 | 1044 | option, can be found in the config file, or will be taken from the |
e0d19036 | 1045 | super block on the first component-device listed on the command line. |
52826846 | 1046 | |
2ae555c3 | 1047 | Devices can be given on the |
52826846 | 1048 | .B --assemble |
5787fa49 NB |
1049 | command line or in the config file. Only devices which have an md |
1050 | superblock which contains the right identity will be considered for | |
1051 | any array. | |
52826846 | 1052 | |
2ae555c3 | 1053 | The config file is only used if explicitly named with |
52826846 | 1054 | .B --config |
d013a55e | 1055 | or requested with (a possibly implicit) |
2ae555c3 | 1056 | .B --scan. |
52826846 | 1057 | In the later case, |
9a9dab36 | 1058 | .B /etc/mdadm.conf |
52826846 NB |
1059 | is used. |
1060 | ||
2ae555c3 | 1061 | If |
52826846 | 1062 | .B --scan |
cd29a5c8 NB |
1063 | is not given, then the config file will only be used to find the |
1064 | identity of md arrays. | |
52826846 | 1065 | |
2d465520 | 1066 | Normally the array will be started after it is assembled. However if |
cd29a5c8 | 1067 | .B --scan |
2d465520 | 1068 | is not given and insufficient drives were listed to start a complete |
cd29a5c8 NB |
1069 | (non-degraded) array, then the array is not started (to guard against |
1070 | usage errors). To insist that the array be started in this case (as | |
1a7dfc35 | 1071 | may work for RAID1, 4, 5, 6, or 10), give the |
cd29a5c8 NB |
1072 | .B --run |
1073 | flag. | |
52826846 | 1074 | |
75723446 NB |
1075 | If the md device does not exist, then it will be created providing the |
1076 | intent is clear. i.e. the name must be in a standard form, or the | |
1077 | .I --auto | |
1078 | option must be given to clarify how and whether the device should be | |
1079 | created. | |
dd0781e5 NB |
1080 | |
1081 | This can be useful for handling partitioned devices (which don't have | |
1082 | a stable device number - it can change after a reboot) and when using | |
1083 | "udev" to manage your | |
1084 | .B /dev | |
1085 | tree (udev cannot handle md devices because of the unusual device | |
1086 | initialisation conventions). | |
1087 | ||
1088 | If the option to "auto" is "mdp" or "part" or (on the command line | |
1089 | only) "p", then mdadm will create a partitionable array, using the | |
2ae555c3 | 1090 | first free one that is not in use, and does not already have an entry |
dd0781e5 NB |
1091 | in /dev (apart from numeric /dev/md* entries). |
1092 | ||
1093 | If the option to "auto" is "yes" or "md" or (on the command line) | |
1094 | nothing, then mdadm will create a traditional, non-partitionable md | |
1095 | array. | |
1096 | ||
1097 | It is expected that the "auto" functionality will be used to create | |
1098 | device entries with meaningful names such as "/dev/md/home" or | |
1099 | "/dev/md/root", rather than names based on the numerical array number. | |
1100 | ||
1101 | When using this option to create a partitionable array, the device | |
1102 | files for the first 4 partitions are also created. If a different | |
1103 | number is required it can be simply appended to the auto option. | |
1104 | e.g. "auto=part8". Partition names are created by appending a digit | |
a9d69660 | 1105 | string to the device name, with an intervening "p" if the device name |
dd0781e5 NB |
1106 | ends with a digit. |
1107 | ||
1108 | The | |
1109 | .B --auto | |
1110 | option is also available in Build and Create modes. As those modes do | |
1111 | not use a config file, the "auto=" config option does not apply to | |
1112 | these modes. | |
52826846 | 1113 | |
41a3b72a NB |
1114 | .SS Auto Assembly |
1115 | When | |
1116 | .B --assemble | |
1117 | is used with | |
1118 | .B --scan | |
1119 | and no devices are listed, | |
1120 | .I mdadm | |
1121 | will first attempt to assemble all the arrays listed in the config | |
1122 | file. | |
1123 | ||
1124 | If a | |
1125 | .B homehost | |
1126 | has been specified (either in the config file or on the command line), | |
1127 | .I mdadm | |
1128 | will look further for possible arrays and will try to assemble | |
1129 | anything that it finds which is tagged as belonging to the given | |
1130 | homehost. This is the only situation where | |
1131 | .I mdadm | |
1132 | will assemble arrays without being given specific device name or | |
1133 | identify information for the array. | |
1134 | ||
1135 | If | |
1136 | .I mdadm | |
1137 | finds a consistent set of devices that look like they should comprise | |
1138 | an array, and if the superblock is tagged as belonging to the given | |
1139 | home host, it will automatically choose a device name and try to | |
1140 | assemble the array. If the array uses version-0.90 metadata, then the | |
1141 | .B minor | |
1142 | number as recorded in the superblock is used to create a name in | |
1143 | .B /dev/md/ | |
1144 | so for example | |
1145 | .BR /dev/md/3 . | |
1146 | If the array uses version-1 metadata, then the | |
1147 | .B name | |
1148 | from the superblock is used to similarly create a name in | |
1149 | .BR /dev/md . | |
1150 | The name will have any 'host' prefix stripped first. | |
1151 | ||
1152 | If | |
1153 | .I mdadm | |
1154 | cannot find any array for the given host at all, and if | |
1155 | .B --auto-update-homehost | |
1156 | is given, then | |
1157 | .I mdadm | |
1158 | will search again for any array (not just an array created for this | |
1159 | host) and will assemble each assuming | |
1160 | .IR --update=homehost . | |
1161 | This will change the host tag in the superblock so that on the next run, | |
1162 | these arrays will be found without the second pass. The intention of | |
1163 | this feature is to support transitioning a set of md arrays to using | |
1164 | homehost tagging. | |
1165 | ||
1166 | The reason for requiring arrays to be tagged with the homehost for | |
1167 | auto assembly is to guard against problems that can arise when moving | |
1168 | devices from one host to another. | |
1169 | ||
cd29a5c8 | 1170 | .SH BUILD MODE |
52826846 | 1171 | |
cd29a5c8 NB |
1172 | .HP 12 |
1173 | Usage: | |
9a9dab36 | 1174 | .B mdadm --build |
cd29a5c8 NB |
1175 | .I device |
1176 | .BI --chunk= X | |
1177 | .BI --level= Y | |
b83d95f3 | 1178 | .BI --raid-devices= Z |
cd29a5c8 NB |
1179 | .I devices |
1180 | ||
1181 | .PP | |
2ae555c3 | 1182 | This usage is similar to |
cd29a5c8 | 1183 | .BR --create . |
a9d69660 | 1184 | The difference is that it creates an array without a superblock. With |
cd29a5c8 | 1185 | these arrays there is no difference between initially creating the array and |
52826846 NB |
1186 | subsequently assembling the array, except that hopefully there is useful |
1187 | data there in the second case. | |
1188 | ||
a9d69660 NB |
1189 | The level may raid0, linear, multipath, or faulty, or one of their |
1190 | synonyms. All devices must be listed and the array will be started | |
1191 | once complete. | |
cd29a5c8 NB |
1192 | |
1193 | .SH CREATE MODE | |
1194 | ||
1195 | .HP 12 | |
1196 | Usage: | |
9a9dab36 | 1197 | .B mdadm --create |
cd29a5c8 NB |
1198 | .I device |
1199 | .BI --chunk= X | |
1200 | .BI --level= Y | |
1201 | .br | |
b83d95f3 | 1202 | .BI --raid-devices= Z |
cd29a5c8 NB |
1203 | .I devices |
1204 | ||
1205 | .PP | |
1206 | This usage will initialise a new md array, associate some devices with | |
1207 | it, and activate the array. | |
1208 | ||
a9d69660 | 1209 | If the |
dd0781e5 NB |
1210 | .B --auto |
1211 | option is given (as described in more detail in the section on | |
1212 | Assemble mode), then the md device will be created with a suitable | |
1213 | device number if necessary. | |
1214 | ||
cd29a5c8 | 1215 | As devices are added, they are checked to see if they contain raid |
2d465520 | 1216 | superblocks or filesystems. They are also checked to see if the variance in |
cd29a5c8 NB |
1217 | device size exceeds 1%. |
1218 | ||
1219 | If any discrepancy is found, the array will not automatically be run, though | |
2ae555c3 | 1220 | the presence of a |
cd29a5c8 NB |
1221 | .B --run |
1222 | can override this caution. | |
1223 | ||
2d465520 | 1224 | To create a "degraded" array in which some devices are missing, simply |
d013a55e | 1225 | give the word "\fBmissing\fP" |
2d465520 NB |
1226 | in place of a device name. This will cause |
1227 | .B mdadm | |
1228 | to leave the corresponding slot in the array empty. | |
1229 | For a RAID4 or RAID5 array at most one slot can be | |
98c6faba | 1230 | "\fBmissing\fP"; for a RAID6 array at most two slots. |
2d465520 NB |
1231 | For a RAID1 array, only one real device needs to be given. All of the |
1232 | others can be | |
d013a55e | 1233 | "\fBmissing\fP". |
2d465520 | 1234 | |
feb716e9 NB |
1235 | When creating a RAID5 array, |
1236 | .B mdadm | |
1237 | will automatically create a degraded array with an extra spare drive. | |
1238 | This is because building the spare into a degraded array is in general faster than resyncing | |
1239 | the parity on a non-degraded, but not clean, array. This feature can | |
1240 | be over-ridden with the | |
b5e64645 | 1241 | .I --force |
feb716e9 NB |
1242 | option. |
1243 | ||
41a3b72a NB |
1244 | When creating an array with version-1 metadata a name for the host is |
1245 | required. | |
1246 | If this is not given with the | |
1247 | .B --name | |
1248 | option, | |
1249 | .I mdadm | |
1250 | will chose a name based on the last component of the name of the | |
1251 | device being created. So if | |
1252 | .B /dev/md3 | |
1253 | is being created, then the name | |
1254 | .B 3 | |
1255 | will be chosen. | |
1256 | If | |
1257 | .B /dev/md/home | |
1258 | is being created, then the name | |
1259 | .B home | |
1260 | will be used. | |
1261 | ||
2ae555c3 | 1262 | '''If the |
cd29a5c8 | 1263 | '''.B --size |
e0d19036 | 1264 | '''option is given, it is not necessary to list any component-devices in this command. |
cd29a5c8 | 1265 | '''They can be added later, before a |
2ae555c3 NB |
1266 | '''.B --run. |
1267 | '''If no | |
cd29a5c8 NB |
1268 | '''.B --size |
1269 | '''is given, the apparent size of the smallest drive given is used. | |
1270 | ||
1271 | The General Management options that are valid with --create are: | |
1272 | .TP | |
1273 | .B --run | |
dd0781e5 | 1274 | insist on running the array even if some devices look like they might |
cd29a5c8 NB |
1275 | be in use. |
1276 | ||
1277 | .TP | |
1278 | .B --readonly | |
1279 | start the array readonly - not supported yet. | |
52826846 | 1280 | |
2ae555c3 | 1281 | |
e0d19036 | 1282 | .SH MANAGE MODE |
cd29a5c8 NB |
1283 | .HP 12 |
1284 | Usage: | |
e0d19036 NB |
1285 | .B mdadm |
1286 | .I device | |
1287 | .I options... devices... | |
cd29a5c8 NB |
1288 | .PP |
1289 | ||
e0d19036 NB |
1290 | This usage will allow individual devices in an array to be failed, |
1291 | removed or added. It is possible to perform multiple operations with | |
1292 | on command. For example: | |
1293 | .br | |
5787fa49 | 1294 | .B " mdadm /dev/md0 -f /dev/hda1 -r /dev/hda1 -a /dev/hda1" |
e0d19036 NB |
1295 | .br |
1296 | will firstly mark | |
1297 | .B /dev/hda1 | |
1298 | as faulty in | |
1299 | .B /dev/md0 | |
1300 | and will then remove it from the array and finally add it back | |
2d465520 | 1301 | in as a spare. However only one md array can be affected by a single |
2ae555c3 | 1302 | command. |
e0d19036 NB |
1303 | |
1304 | .SH MISC MODE | |
1305 | .HP 12 | |
1306 | Usage: | |
9a9dab36 | 1307 | .B mdadm |
e0d19036 NB |
1308 | .I options ... |
1309 | .I devices ... | |
1310 | .PP | |
cd29a5c8 | 1311 | |
b5e64645 | 1312 | MISC mode includes a number of distinct operations that |
e0d19036 NB |
1313 | operate on distinct devices. The operations are: |
1314 | .TP | |
1315 | --query | |
1316 | The device is examined to see if it is | |
1317 | (1) an active md array, or | |
1318 | (2) a component of an md array. | |
1319 | The information discovered is reported. | |
1320 | ||
1321 | .TP | |
1322 | --detail | |
2d465520 NB |
1323 | The device should be an active md device. |
1324 | .B mdadm | |
1325 | will display a detailed description of the array. | |
cd29a5c8 | 1326 | .B --brief |
2d465520 NB |
1327 | or |
1328 | .B --scan | |
1329 | will cause the output to be less detailed and the format to be | |
e0d19036 | 1330 | suitable for inclusion in |
9a9dab36 | 1331 | .BR /etc/mdadm.conf . |
feb716e9 NB |
1332 | The exit status of |
1333 | .I mdadm | |
1334 | will normally be 0 unless | |
1335 | .I mdadm | |
1336 | failed to get useful information about the device(s). However if the | |
1337 | .B --test | |
1338 | option is given, then the exit status will be: | |
1339 | .RS | |
1340 | .TP | |
1341 | 0 | |
1342 | The array is functioning normally. | |
1343 | .TP | |
1344 | 1 | |
1345 | The array has at least one failed device. | |
1346 | .TP | |
1347 | 2 | |
1348 | The array has multiple failed devices and hence is unusable (raid4 or | |
1349 | raid5). | |
1350 | .TP | |
1351 | 4 | |
1352 | There was an error while trying to get information about the device. | |
1353 | .RE | |
cd29a5c8 | 1354 | |
e0d19036 NB |
1355 | .TP |
1356 | --examine | |
2d465520 NB |
1357 | The device should be a component of an md array. |
1358 | .B mdadm | |
1359 | will read the md superblock of the device and display the contents. | |
e0d19036 NB |
1360 | If |
1361 | .B --brief | |
1362 | is given, or | |
1363 | .B --scan | |
1364 | then multiple devices that are components of the one array | |
1365 | are grouped together and reported in a single entry suitable | |
1366 | for inclusion in | |
1367 | .BR /etc/mdadm.conf . | |
1368 | ||
2d465520 | 1369 | Having |
e0d19036 NB |
1370 | .B --scan |
1371 | without listing any devices will cause all devices listed in the | |
1372 | config file to be examined. | |
1373 | ||
1374 | .TP | |
1375 | --stop | |
98c6faba NB |
1376 | The devices should be active md arrays which will be deactivated, as |
1377 | long as they are not currently in use. | |
e0d19036 NB |
1378 | |
1379 | .TP | |
1380 | --run | |
1381 | This will fully activate a partially assembled md array. | |
1382 | ||
1383 | .TP | |
1384 | --readonly | |
1385 | This will mark an active array as read-only, providing that it is | |
1386 | not currently being used. | |
1387 | ||
1388 | .TP | |
1389 | --readwrite | |
1390 | This will change a | |
1391 | .B readonly | |
1392 | array back to being read/write. | |
1393 | ||
2d465520 NB |
1394 | .TP |
1395 | --scan | |
1396 | For all operations except | |
1397 | .BR --examine , | |
1398 | .B --scan | |
1399 | will cause the operation to be applied to all arrays listed in | |
1400 | .BR /proc/mdstat . | |
1401 | For | |
1402 | .BR --examine, | |
1403 | .B --scan | |
1404 | causes all devices listed in the config file to be examined. | |
1405 | ||
1406 | ||
e0d19036 NB |
1407 | .SH MONITOR MODE |
1408 | ||
cd29a5c8 NB |
1409 | .HP 12 |
1410 | Usage: | |
e0d19036 NB |
1411 | .B mdadm --monitor |
1412 | .I options... devices... | |
1413 | ||
cd29a5c8 | 1414 | .PP |
e0d19036 NB |
1415 | This usage causes |
1416 | .B mdadm | |
1417 | to periodically poll a number of md arrays and to report on any events | |
1418 | noticed. | |
1419 | .B mdadm | |
1420 | will never exit once it decides that there are arrays to be checked, | |
1421 | so it should normally be run in the background. | |
1422 | ||
2d465520 NB |
1423 | As well as reporting events, |
1424 | .B mdadm | |
1425 | may move a spare drive from one array to another if they are in the | |
1426 | same | |
1427 | .B spare-group | |
a9d69660 | 1428 | and if the destination array has a failed drive but no spares. |
2d465520 | 1429 | |
e0d19036 NB |
1430 | If any devices are listed on the command line, |
1431 | .B mdadm | |
1432 | will only monitor those devices. Otherwise all arrays listed in the | |
1433 | configuration file will be monitored. Further, if | |
1434 | .B --scan | |
1435 | is given, then any other md devices that appear in | |
1436 | .B /proc/mdstat | |
1437 | will also be monitored. | |
1438 | ||
1439 | The result of monitoring the arrays is the generation of events. | |
bd526cee | 1440 | These events are passed to a separate program (if specified) and may |
2d465520 | 1441 | be mailed to a given E-mail address. |
e0d19036 | 1442 | |
bd526cee | 1443 | When passing event to program, the program is run once for each event |
2ae555c3 | 1444 | and is given 2 or 3 command-line arguments. The first is the |
bd526cee NB |
1445 | name of the event (see below). The second is the name of the |
1446 | md device which is affected, and the third is the name of a related | |
1447 | device if relevant, such as a component device that has failed. | |
cd29a5c8 NB |
1448 | |
1449 | If | |
1450 | .B --scan | |
e0d19036 NB |
1451 | is given, then a program or an E-mail address must be specified on the |
1452 | command line or in the config file. If neither are available, then | |
1453 | .B mdadm | |
1454 | will not monitor anything. | |
1455 | Without | |
cd29a5c8 | 1456 | .B --scan |
e0d19036 | 1457 | .B mdadm |
2d465520 | 1458 | will continue monitoring as long as something was found to monitor. If |
e0d19036 NB |
1459 | no program or email is given, then each event is reported to |
1460 | .BR stdout . | |
cd29a5c8 | 1461 | |
e0d19036 NB |
1462 | The different events are: |
1463 | ||
1464 | .RS 4 | |
1465 | .TP | |
1466 | .B DeviceDisappeared | |
2d465520 | 1467 | An md array which previously was configured appears to no longer be |
773135f5 | 1468 | configured. (syslog priority: Critical) |
e0d19036 | 1469 | |
b8f72a62 NB |
1470 | If |
1471 | .I mdadm | |
1472 | was told to monitor an array which is RAID0 or Linear, then it will | |
1473 | report | |
1474 | .B DeviceDisappeared | |
1475 | with the extra information | |
1476 | .BR Wrong-Level . | |
1477 | This is because RAID0 and Linear do not support the device-failed, | |
1478 | hot-spare and resync operations which are monitored. | |
1479 | ||
e0d19036 NB |
1480 | .TP |
1481 | .B RebuildStarted | |
773135f5 | 1482 | An md array started reconstruction. (syslog priority: Warning) |
e0d19036 NB |
1483 | |
1484 | .TP | |
1485 | .BI Rebuild NN | |
1486 | Where | |
1487 | .I NN | |
1488 | is 20, 40, 60, or 80, this indicates that rebuild has passed that many | |
773135f5 | 1489 | percentage of the total. (syslog priority: Warning) |
e0d19036 | 1490 | |
98c6faba NB |
1491 | .TP |
1492 | .B RebuildFinished | |
1493 | An md array that was rebuilding, isn't any more, either because it | |
773135f5 | 1494 | finished normally or was aborted. (syslog priority: Warning) |
98c6faba | 1495 | |
e0d19036 NB |
1496 | .TP |
1497 | .B Fail | |
773135f5 NB |
1498 | An active component device of an array has been marked as |
1499 | faulty. (syslog priority: Critical) | |
e0d19036 NB |
1500 | |
1501 | .TP | |
1502 | .B FailSpare | |
1503 | A spare component device which was being rebuilt to replace a faulty | |
773135f5 | 1504 | device has failed. (syslog priority: Critial) |
e0d19036 NB |
1505 | |
1506 | .TP | |
1507 | .B SpareActive | |
1508 | A spare component device which was being rebuilt to replace a faulty | |
98b24a2a | 1509 | device has been successfully rebuilt and has been made active. |
773135f5 | 1510 | (syslog priority: Info) |
e0d19036 NB |
1511 | |
1512 | .TP | |
1513 | .B NewArray | |
1514 | A new md array has been detected in the | |
1515 | .B /proc/mdstat | |
773135f5 | 1516 | file. (syslog priority: Info) |
e0d19036 | 1517 | |
aa88f531 NB |
1518 | .TP |
1519 | .B DegradedArray | |
1520 | A newly noticed array appears to be degraded. This message is not | |
1521 | generated when | |
1522 | .I mdadm | |
1523 | notices a drive failure which causes degradation, but only when | |
1524 | .I mdadm | |
1525 | notices that an array is degraded when it first sees the array. | |
773135f5 | 1526 | (syslog priority: Critial) |
aa88f531 | 1527 | |
e0d19036 NB |
1528 | .TP |
1529 | .B MoveSpare | |
1530 | A spare drive has been moved from one array in a | |
1531 | .B spare-group | |
1532 | to another to allow a failed drive to be replaced. | |
773135f5 | 1533 | (syslog priority: Info) |
e0d19036 | 1534 | |
b8f72a62 NB |
1535 | .TP |
1536 | .B SparesMissing | |
1537 | If | |
1538 | .I mdadm | |
1539 | has been told, via the config file, that an array should have a certain | |
1540 | number of spare devices, and | |
1541 | .I mdadm | |
1542 | detects that it has fewer that this number when it first sees the | |
1543 | array, it will report a | |
1544 | .B SparesMissing | |
1545 | message. | |
d1732eeb | 1546 | (syslog priority: Warning) |
b8f72a62 | 1547 | |
98c6faba NB |
1548 | .TP |
1549 | .B TestMessage | |
1550 | An array was found at startup, and the | |
1551 | .B --test | |
1552 | flag was given. | |
773135f5 | 1553 | (syslog priority: Info) |
e0d19036 NB |
1554 | .RE |
1555 | ||
1556 | Only | |
98c6faba NB |
1557 | .B Fail , |
1558 | .B FailSpare , | |
1559 | .B DegradedArray , | |
d1732eeb | 1560 | .B SparesMissing , |
e0d19036 | 1561 | and |
98c6faba | 1562 | .B TestMessage |
e0d19036 NB |
1563 | cause Email to be sent. All events cause the program to be run. |
1564 | The program is run with two or three arguments, they being the event | |
1565 | name, the array device and possibly a second device. | |
1566 | ||
1567 | Each event has an associated array device (e.g. | |
1568 | .BR /dev/md1 ) | |
1569 | and possibly a second device. For | |
1570 | .BR Fail , | |
1571 | .BR FailSpare , | |
1572 | and | |
1573 | .B SpareActive | |
1574 | the second device is the relevant component device. | |
1575 | For | |
1576 | .B MoveSpare | |
1577 | the second device is the array that the spare was moved from. | |
1578 | ||
1579 | For | |
1580 | .B mdadm | |
1581 | to move spares from one array to another, the different arrays need to | |
1582 | be labelled with the same | |
1583 | .B spare-group | |
1584 | in the configuration file. The | |
1585 | .B spare-group | |
1586 | name can be any string. It is only necessary that different spare | |
2d465520 | 1587 | groups use different names. |
e0d19036 NB |
1588 | |
1589 | When | |
9a9dab36 | 1590 | .B mdadm |
e0d19036 NB |
1591 | detects that an array which is in a spare group has fewer active |
1592 | devices than necessary for the complete array, and has no spare | |
1593 | devices, it will look for another array in the same spare group that | |
1594 | has a full complement of working drive and a spare. It will then | |
1595 | attempt to remove the spare from the second drive and add it to the | |
1596 | first. | |
1597 | If the removal succeeds but the adding fails, then it is added back to | |
1598 | the original array. | |
1599 | ||
dd0781e5 NB |
1600 | .SH GROW MODE |
1601 | The GROW mode is used for changing the size or shape of an active | |
1602 | array. | |
1603 | For this to work, the kernel must support the necessary change. | |
2ae555c3 | 1604 | Various types of growth are being added during 2.6 development, |
dd0781e5 NB |
1605 | including restructuring a raid5 array to have more active devices. |
1606 | ||
dfd4d8ee NB |
1607 | Currently the only support available is to |
1608 | .IP \(bu 4 | |
1609 | change the "size" attribute | |
1610 | for RAID1, RAID5 and RAID6. | |
1611 | .IP \(bu 4 | |
2ae555c3 | 1612 | increase the "raid-disks" attribute of RAID1 and RAID5. |
dfd4d8ee | 1613 | .IP \(bu 4 |
2ae555c3 NB |
1614 | add a write-intent bitmap to any array which support these bitmaps, or |
1615 | remove a write-intent bitmap from such an array. | |
dfd4d8ee | 1616 | .PP |
dd0781e5 | 1617 | |
2ae555c3 | 1618 | .SS SIZE CHANGES |
fe80f49b | 1619 | Normally when an array is built the "size" it taken from the smallest |
dd0781e5 NB |
1620 | of the drives. If all the small drives in an arrays are, one at a |
1621 | time, removed and replaced with larger drives, then you could have an | |
1622 | array of large drives with only a small amount used. In this | |
1623 | situation, changing the "size" with "GROW" mode will allow the extra | |
1624 | space to start being used. If the size is increased in this way, a | |
1625 | "resync" process will start to make sure the new parts of the array | |
1626 | are synchronised. | |
1627 | ||
1628 | Note that when an array changes size, any filesystem that may be | |
1629 | stored in the array will not automatically grow to use the space. The | |
1630 | filesystem will need to be explicitly told to use the extra space. | |
1631 | ||
2ae555c3 NB |
1632 | .SS RAID-DEVICES CHANGES |
1633 | ||
dd0781e5 NB |
1634 | A RAID1 array can work with any number of devices from 1 upwards |
1635 | (though 1 is not very useful). There may be times which you want to | |
1636 | increase or decrease the number of active devices. Note that this is | |
1637 | different to hot-add or hot-remove which changes the number of | |
1638 | inactive devices. | |
1639 | ||
1640 | When reducing the number of devices in a RAID1 array, the slots which | |
1641 | are to be removed from the array must already be vacant. That is, the | |
1642 | devices that which were in those slots must be failed and removed. | |
1643 | ||
1644 | When the number of devices is increased, any hot spares that are | |
a9d69660 | 1645 | present will be activated immediately. |
dd0781e5 | 1646 | |
2ae555c3 NB |
1647 | Increasing the number of active devices in a RAID5 is much more |
1648 | effort. Every block in the array will need to be read and written | |
1649 | back to a new location. From 2.6.17, the Linux Kernel is able to do | |
1650 | this safely, including restart and interrupted "reshape". | |
1651 | ||
1652 | When relocating the first few stripes on a raid5, it is not possible | |
1653 | to keep the data on disk completely consistent and crash-proof. To | |
1654 | provide the required safety, mdadm disables writes to the array while | |
1655 | this "critical section" is reshaped, and takes a backup of the data | |
1656 | that is in that section. This backup is normally stored in any spare | |
1657 | devices that the array has, however it can also be stored in a | |
1658 | separate file specified with the | |
1659 | .B --backup-file | |
1660 | option. If this option is used, and the system does crash during the | |
1661 | critical period, the same file must be passed to | |
1662 | .B --assemble | |
1663 | to restore the backup and reassemble the array. | |
1664 | ||
1665 | .SS BITMAP CHANGES | |
1666 | ||
1667 | A write-intent bitmap can be added to, or removed from, an active | |
1668 | array. Either internal bitmaps, or bitmaps stored in a separate file | |
fe80f49b NB |
1669 | can be added. Note that if you add a bitmap stored in a file which is |
1670 | in a filesystem that is on the raid array being affected, the system | |
1671 | will deadlock. The bitmap must be on a separate filesystem. | |
1672 | ||
2d465520 NB |
1673 | .SH EXAMPLES |
1674 | ||
5787fa49 | 1675 | .B " mdadm --query /dev/name-of-device" |
2d465520 | 1676 | .br |
5787fa49 NB |
1677 | This will find out if a given device is a raid array, or is part of |
1678 | one, and will provide brief information about the device. | |
2d465520 | 1679 | |
5787fa49 | 1680 | .B " mdadm --assemble --scan" |
2d465520 | 1681 | .br |
2ae555c3 | 1682 | This will assemble and start all arrays listed in the standard config file |
5787fa49 | 1683 | file. This command will typically go in a system startup file. |
2d465520 | 1684 | |
2d465520 | 1685 | .B " mdadm --stop --scan" |
5787fa49 NB |
1686 | .br |
1687 | This will shut down all array that can be shut down (i.e. are not | |
19f8b8fc | 1688 | currently in use). This will typically go in a system shutdown script. |
2d465520 | 1689 | |
5787fa49 | 1690 | .B " mdadm --follow --scan --delay=120" |
2d465520 | 1691 | .br |
5787fa49 NB |
1692 | If (and only if) there is an Email address or program given in the |
1693 | standard config file, then | |
1694 | monitor the status of all arrays listed in that file by | |
1695 | polling them ever 2 minutes. | |
2d465520 | 1696 | |
5787fa49 | 1697 | .B " mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/hd[ac]1" |
2d465520 | 1698 | .br |
5787fa49 | 1699 | Create /dev/md0 as a RAID1 array consisting of /dev/hda1 and /dev/hdc1. |
2d465520 | 1700 | |
2d465520 NB |
1701 | .br |
1702 | .B " echo 'DEVICE /dev/hd*[0-9] /dev/sd*[0-9]' > mdadm.conf" | |
1703 | .br | |
1704 | .B " mdadm --detail --scan >> mdadm.conf" | |
1705 | .br | |
5787fa49 NB |
1706 | This will create a prototype config file that describes currently |
1707 | active arrays that are known to be made from partitions of IDE or SCSI drives. | |
2d465520 NB |
1708 | This file should be reviewed before being used as it may |
1709 | contain unwanted detail. | |
1710 | ||
2d465520 NB |
1711 | .B " echo 'DEVICE /dev/hd[a-z] /dev/sd*[a-z]' > mdadm.conf" |
1712 | .br | |
5787fa49 NB |
1713 | .B " mdadm --examine --scan --config=mdadm.conf >> mdadm.conf" |
1714 | .ber | |
2ae555c3 | 1715 | This will find what arrays could be assembled from existing IDE and |
5787fa49 NB |
1716 | SCSI whole drives (not partitions) and store the information is the |
1717 | format of a config file. | |
2d465520 NB |
1718 | This file is very likely to contain unwanted detail, particularly |
1719 | the | |
1720 | .B devices= | |
5787fa49 NB |
1721 | entries. It should be reviewed and edited before being used as an |
1722 | actual config file. | |
2d465520 | 1723 | |
5787fa49 | 1724 | .B " mdadm --examine --brief --scan --config=partitions" |
2d465520 | 1725 | .br |
5787fa49 NB |
1726 | .B " mdadm -Ebsc partitions" |
1727 | .br | |
1728 | Create a list of devices by reading | |
1729 | .BR /proc/partitions , | |
1730 | scan these for RAID superblocks, and printout a brief listing of all | |
1731 | that was found. | |
2d465520 | 1732 | |
5787fa49 | 1733 | .B " mdadm -Ac partitions -m 0 /dev/md0" |
2d465520 | 1734 | .br |
5787fa49 NB |
1735 | Scan all partitions and devices listed in |
1736 | .BR /proc/partitions | |
1737 | and assemble | |
1738 | .B /dev/md0 | |
1739 | out of all such devices with a RAID superblock with a minor number of 0. | |
2d465520 | 1740 | |
d013a55e NB |
1741 | .B " mdadm --monitor --scan --daemonise > /var/run/mdadm" |
1742 | .br | |
1743 | If config file contains a mail address or alert program, run mdadm in | |
1744 | the background in monitor mode monitoring all md devices. Also write | |
1745 | pid of mdadm daemon to | |
1746 | .BR /var/run/mdadm . | |
1747 | ||
5787fa49 | 1748 | .B " mdadm --create --help" |
2d465520 | 1749 | .br |
2ae555c3 | 1750 | Provide help about the Create mode. |
2d465520 | 1751 | |
5787fa49 NB |
1752 | .B " mdadm --config --help" |
1753 | .br | |
1754 | Provide help about the format of the config file. | |
2d465520 | 1755 | |
5787fa49 NB |
1756 | .B " mdadm --help" |
1757 | .br | |
1758 | Provide general help. | |
cd29a5c8 | 1759 | |
cd29a5c8 NB |
1760 | |
1761 | .SH FILES | |
1762 | ||
1763 | .SS /proc/mdstat | |
1764 | ||
2ae555c3 NB |
1765 | If you're using the |
1766 | .B /proc | |
cd29a5c8 NB |
1767 | filesystem, |
1768 | .B /proc/mdstat | |
2d465520 NB |
1769 | lists all active md devices with information about them. |
1770 | .B mdadm | |
1771 | uses this to find arrays when | |
1772 | .B --scan | |
1773 | is given in Misc mode, and to monitor array reconstruction | |
1774 | on Monitor mode. | |
1775 | ||
cd29a5c8 | 1776 | |
9a9dab36 | 1777 | .SS /etc/mdadm.conf |
cd29a5c8 | 1778 | |
11a3e71d NB |
1779 | The config file lists which devices may be scanned to see if |
1780 | they contain MD super block, and gives identifying information | |
1781 | (e.g. UUID) about known MD arrays. See | |
1782 | .BR mdadm.conf (5) | |
1783 | for more details. | |
cd29a5c8 | 1784 | |
48f7b27a NB |
1785 | .SH DEVICE NAMES |
1786 | ||
1787 | While entries in the /dev directory can have any format you like, | |
1788 | .I mdadm | |
1789 | has an understanding of 'standard' formats which it uses to guide its | |
1790 | behaviour when creating device files via the | |
1791 | .I --auto | |
1792 | option. | |
1793 | ||
1794 | The standard names for non-partitioned arrays (the only sort of md | |
1795 | array available in 2.4 and earlier) either of | |
1796 | .IP | |
1797 | /dev/mdNN | |
1798 | .br | |
1799 | /dev/md/NN | |
1800 | .PP | |
1801 | where NN is a number. | |
1802 | The standard names for partitionable arrays (as available from 2.6 | |
1803 | onwards) is one of | |
1804 | .IP | |
1805 | /dev/md/dNN | |
1806 | .br | |
1807 | /dev/md_dNN | |
1808 | .PP | |
1809 | Partition numbers should be indicated by added "pMM" to these, thus "/dev/md/d1p2". | |
52826846 | 1810 | |
2d465520 NB |
1811 | .SH NOTE |
1812 | .B mdadm | |
1813 | was previously known as | |
1814 | .BR mdctl . | |
a9d69660 NB |
1815 | .P |
1816 | .B mdadm | |
1817 | is completely separate from the | |
1818 | .B raidtools | |
1819 | package, and does not use the | |
1820 | .I /etc/raidtab | |
1821 | configuration file at all. | |
1822 | ||
52826846 | 1823 | .SH SEE ALSO |
cd29a5c8 NB |
1824 | For information on the various levels of |
1825 | RAID, check out: | |
1826 | ||
1827 | .IP | |
1828 | .UR http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/ | |
1829 | http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/ | |
1830 | .UE | |
a9d69660 NB |
1831 | '''.PP |
1832 | '''for new releases of the RAID driver check out: | |
1833 | ''' | |
1834 | '''.IP | |
1835 | '''.UR ftp://ftp.kernel.org/pub/linux/kernel/people/mingo/raid-patches | |
1836 | '''ftp://ftp.kernel.org/pub/linux/kernel/people/mingo/raid-patches | |
1837 | '''.UE | |
1838 | '''.PP | |
1839 | '''or | |
1840 | '''.IP | |
1841 | '''.UR http://www.cse.unsw.edu.au/~neilb/patches/linux-stable/ | |
1842 | '''http://www.cse.unsw.edu.au/~neilb/patches/linux-stable/ | |
1843 | '''.UE | |
cd29a5c8 | 1844 | .PP |
2ae555c3 | 1845 | The latest version of |
a9d69660 NB |
1846 | .I mdadm |
1847 | should always be available from | |
cd29a5c8 | 1848 | .IP |
a9d69660 NB |
1849 | .UR http://www.kernel.org/pub/linux/utils/raid/mdadm/ |
1850 | http://www.kernel.org/pub/linux/utils/raid/mdadm/ | |
cd29a5c8 NB |
1851 | .UE |
1852 | .PP | |
a9d69660 NB |
1853 | .IR mdadm.conf (5), |
1854 | .IR md (4). | |
56eb10c0 | 1855 | .PP |
52826846 NB |
1856 | .IR raidtab (5), |
1857 | .IR raid0run (8), | |
1858 | .IR raidstop (8), | |
a9d69660 | 1859 | .IR mkraid (8). |