#include "mdadm.h"
-char Version[] = Name " - v1.0.1 - 20 May 2002\n";
+char Version[] = Name " - v1.0.9 - 12 Feb 2003\n";
/*
* File: ReadMe.c
*
/*
* mdadm has 6 major modes of operation:
* 1/ Create
- * This mode is used to create a new array with a superbock
+ * This mode is used to create a new array with a superblock
* It can progress in several step create-add-add-run
* or it can all happen with one command
* 2/ Assemble
* This mode is used to assemble the parts of a previously created
* array into an active array. Components can be explicitly given
* or can be searched for. mdadm (optionally) check that the components
- * do form a bonafide array, and can, on request, fiddle superblock
+ * do form a bona-fide array, and can, on request, fiddle superblock
* version numbers so as to assemble a faulty array.
* 3/ Build
* This is for building legacy arrays without superblocks
* This mode never exits but just monitors arrays and reports changes.
*/
-char short_options[]="-ABCDEFGQhVvbc:l:p:m:n:x:u:c:d:z:sarfRSow";
+char short_options[]="-ABCDEFGQhVvbc:l:p:m:n:x:u:c:d:z:U:sarfRSow";
struct option long_options[] = {
{"manage", 0, 0, '@'},
{"misc", 0, 0, '#'},
{"chunk", 1, 0, 'c'},
{"rounding", 1, 0, 'c'}, /* for linear, chunk is really a rounding number */
{"level", 1, 0, 'l'}, /* 0,1,4,5,linear */
- {"parity", 1, 0, 'p'}, /* {left,right}-{a,}symetric */
+ {"parity", 1, 0, 'p'}, /* {left,right}-{a,}symmetric */
{"layout", 1, 0, 'p'},
{"raid-disks",1, 0, 'n'},
{"raid-devices",1, 0, 'n'},
{"config", 1, 0, 'c'},
{"scan", 0, 0, 's'},
{"force", 0, 0, 'f'},
+ {"update", 1, 0, 'U'},
/* Management */
{"add", 0, 0, 'a'},
{"remove", 0, 0, 'r'},
/* For Detail/Examine */
{"brief", 0, 0, 'b'},
{"sparc2.2", 0, 0, 22},
- {"sparc2.2update", 0, 0, 23},
/* For Follow/monitor */
{"mail", 1, 0, 'm'},
" mdadm --misc options... devices\n"
" mdadm --monitor options...\n"
" mdadm device options...\n"
-" mdadm is used for building, manageing, and monitoring\n"
+" mdadm is used for building, managing, and monitoring\n"
" Linux md devices (aka RAID arrays)\n"
" For detail help on the above major modes use --help after the mode\n"
" e.g.\n"
" --build -B : Build a legacy array\n"
" --create -C : Create a new array\n"
" --detail -D : Display details of an array\n"
-" --examine -E : Examine superblock on an array componenet\n"
+" --examine -E : Examine superblock on an array component\n"
" --monitor -F : monitor (follow) some arrays\n"
" --query -Q : Display general information about how a\n"
" device relates to the md driver\n"
"\n"
" For create or build:\n"
" --chunk= -c : chunk size of kibibytes\n"
-" --rounding= : rounding factor for linear array (==chunck size)\n"
+" --rounding= : rounding factor for linear array (==chunk size)\n"
" --level= -l : raid level: 0,1,4,5,linear,mp. 0 or linear for build\n"
-" --paritiy= -p : raid5 parity algorith: {left,right}-{,a}symmetric\n"
+" --parity= -p : raid5 parity algorithm: {left,right}-{,a}symmetric\n"
" --layout= : same as --parity\n"
" --raid-devices= -n : number of active devices in array\n"
" --spare-devices= -x: number of spares (eXtras) devices in initial array\n"
" --config= -c : config file\n"
" --scan -s : scan config file for missing information\n"
" --force -f : Assemble the array even if some superblocks appear out-of-date\n"
+" --update= -U : Update superblock: either sparc2.2 or super-minor\n"
"\n"
" For detail or examine:\n"
" --brief -b : Just print device name and UUID\n"
" --fail -f : mark subsequent devices a faulty\n"
" --set-faulty : same as --fail\n"
" --run -R : start a partially built array\n"
-" --stop -S : deactive array, releasing all resources\n"
+" --stop -S : deactivate array, releasing all resources\n"
" --readonly -o : mark array as readonly\n"
" --readwrite -w : mark array as readwrite\n"
" --zero-superblock : erase the MD superblock from a device.\n"
"\n"
" Options that are valid with --create (-C) are:\n"
" --chunk= -c : chunk size of kibibytes\n"
-" --rounding= : rounding factor for linear array (==chunck size)\n"
+" --rounding= : rounding factor for linear array (==chunk size)\n"
" --level= -l : raid level: 0,1,4,5,linear,multipath and synonyms\n"
-" --paritiy= -p : raid5 parity algorith: {left,right}-{,a}symmetric\n"
+" --parity= -p : raid5 parity algorithm: {left,right}-{,a}symmetric\n"
" --layout= : same as --parity\n"
" --raid-devices= -n : number of active devices in array\n"
" --spare-devices= -x: number of spares (eXtras) devices in initial array\n"
" All devices must be listed and the array will be started once complete.\n"
" Options that are valid with --build (-B) are:\n"
" --chunk= -c : chunk size of kibibytes\n"
-" --rounding= : rounding factor for linear array (==chunck size)\n"
+" --rounding= : rounding factor for linear array (==chunk size)\n"
" --level= -l : 0, raid0, or linear\n"
" --raid-devices= -n : number of active devices in array\n"
;
" for a full array are present\n"
" --force -f : Assemble the array even if some superblocks appear\n"
" : out-of-date. This involves modifying the superblocks.\n"
+" --update= -U : Update superblock: either sparc2.2 or super-minor\n"
;
char Help_manage[] =
" --fail -f : mark subsequent devices a faulty\n"
" --set-faulty : same as --fail\n"
" --run -R : start a partially built array\n"
-" --stop -S : deactive array, releasing all resources\n"
+" --stop -S : deactivate array, releasing all resources\n"
" --readonly -o : mark array as readonly\n"
" --readwrite -w : mark array as readwrite\n"
;
" --query -Q : Display general information about how a\n"
" device relates to the md driver\n"
" --detail -D : Display details of an array\n"
-" --examine -E : Examine superblock on an array componenet\n"
+" --examine -E : Examine superblock on an array component\n"
" --zero-superblock : erase the MD superblock from a device.\n"
" --run -R : start a partially built array\n"
-" --stop -S : deactive array, releasing all resources\n"
+" --stop -S : deactivate array, releasing all resources\n"
" --readonly -o : mark array as readonly\n"
" --readwrite -w : mark array as readwrite\n"
;
" array. The identity can be given as a UUID with a word starting 'uuid=', or\n"
" as a minor-number stored in the superblock using 'super-minor=', or as a list\n"
" of devices. This is given as a comma separated list of names, possibly\n"
-" containing wildcards, preceeded by 'devices='. If multiple critea are given,\n"
+" containing wildcards, preceded by 'devices='. If multiple critea are given,\n"
" than a device must match all of them to be considered.\n"
"\n"
" A mailaddr line starts with the word 'mailaddr' and should contain exactly\n"
projects / thirdparty / mdadm.git / blobdiff