fi
prefix='[0-9][0-9]'
-if [ -n "$1" ]
-then prefix=$1
-fi
dir=`pwd`
mdadm=$dir/mdadm
echo >&2 "test: $mdadm isn't usable."
fi
+testdir="tests"
+logdir="$testdir/logs"
+logsave=0
+exitonerror=1
+
+# Check whether to run multipath tests
+modprobe multipath 2> /dev/null
+if grep -s 'Personalities : .*multipath' > /dev/null /proc/mdstat ; then
+ MULTIPATH="yes"
+fi
+
# assume md0, md1, md2 exist in /dev
md0=/dev/md0 md1=/dev/md1 md2=/dev/md2
mdp0=/dev/md_d0
mdsize1a=19988
mdsize12=19988
# super1.2 for linear: round to multiple of 2, subtract 4
-mdsize1_l=18976
-mdsize2_l=18976
+mdsize1_l=19996
+mdsize2_l=19996
# subtract another 4 for bitmaps
mdsize1b=19988
mdsize11=19992
-mdsize11a=18944
+mdsize11a=19456
mdsize12=19988
# ddf needs bigger devices as 32Meg is reserved!
ddfsize=65536
+config=/tmp/mdadm.conf
+
cleanup() {
udevadm settle
$mdadm -Ssq 2> /dev/null
done
}
-trap cleanup 0 1 2 3 15
+do_setup() {
+ trap cleanup 0 1 2 3 15
-devlist=
-for d in 0 1 2 3 4 5 6 7 8 9 10 11 12
-do
- sz=$size
- if [ $d -gt 7 ]; then sz=$ddfsize ; fi
- [ -f $targetdir/mdtest$d ] || dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1
- [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d
- if [ $d -eq 7 ]
- then
- losetup /dev/loop$d $targetdir/mdtest6 # for multipath use
- else
- losetup /dev/loop$d $targetdir/mdtest$d
- fi
- eval dev$d=/dev/loop$d
- eval file$d=$targetdir/mdtest$d
- eval devlist=\"\$devlist \$dev$d\"
+ devlist=
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12
+ do
+ sz=$size
+ if [ $d -gt 7 ]; then sz=$ddfsize ; fi
+ [ -f $targetdir/mdtest$d ] || dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1
+ [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d
+ if [ $d -eq 7 ]
+ then
+ losetup /dev/loop$d $targetdir/mdtest6 # for multipath use
+ else
+ losetup /dev/loop$d $targetdir/mdtest$d
+ fi
+ eval dev$d=/dev/loop$d
+ eval file$d=$targetdir/mdtest$d
+ eval devlist=\"\$devlist \$dev$d\"
#" <-- add this quote to un-confuse vim syntax highlighting
-done
-path0=$dev6
-path1=$dev7
+ done
+ path0=$dev6
+ path1=$dev7
-ulimit -c unlimited
-[ -f /proc/mdstat ] || modprobe md_mod
-echo 2000 > /proc/sys/dev/raid/speed_limit_max
-echo 0 > /sys/module/md_mod/parameters/start_ro
-
-if [ " $1" = " setup" ]
-then trap 0 ; exit 0
-fi
+ ulimit -c unlimited
+ [ -f /proc/mdstat ] || modprobe md_mod
+ echo 2000 > /proc/sys/dev/raid/speed_limit_max
+ echo 0 > /sys/module/md_mod/parameters/start_ro
+}
# mdadm always adds --quiet, and we want to see any unexpected messages
mdadm() {
* ) $mdadm 2> $targetdir/stderr --quiet "$@"
esac
rv=$?
+ case $* in
+ *-S* ) udevadm settle;;
+ esac
cat >&2 $targetdir/stderr
return $rv
}
nosync )
sleep 0.5
- if grep -s -E '(resync|recovery|reshape) =' > /dev/null /proc/mdstat ; then
+ if grep -s -E '(resync|recovery|reshape) *=' > /dev/null /proc/mdstat ; then
echo >&2 "ERROR resync or recovery is happening!"; cat /proc/mdstat ; exit 1;
fi
;;
wait )
sleep 0.1
- while grep -E '(resync|recovery|reshape|check|repair) =' > /dev/null /proc/mdstat
+ while grep -E '(resync|recovery|reshape|check|repair) *=' > /dev/null /proc/mdstat
do sleep 2;
done
;;
rasize=$[rasize*DEV_ROUND_K*2]
fi
if [ `/sbin/blockdev --getsize $dev` -eq 0 ]; then sleep 2 ; fi
- if [ $rasize -ne `/sbin/blockdev --getsize $dev` ]
+ _sz=`/sbin/blockdev --getsize $dev`
+ if [ $rasize -lt $_sz -o $[rasize*4/5] -gt $_sz ]
then
- echo "ERROR: size is wrong for $dev: $cnt * $dvsize (chunk=$chunk) = $rasize, not `/sbin/blockdev --getsize $dev`"
+ echo "ERROR: size is wrong for $dev: $cnt * $dvsize (chunk=$chunk) = $rasize, not $_sz"
exit 1
fi
}
fsck -fn $dev >&2
}
-setup_environment() {
- if [ -f $1 ]; then
- . $environment
- setup_env
- fi
+do_test() {
+ _script=$1
+ _basename=`basename $_script`
+ if [ -f "$_script" ]
+ then
+ rm -f $targetdir/stderr
+ # stop all arrays, just incase some script left an array active.
+ $mdadm -Ssq 2> /dev/null
+ mdadm --zero $devlist 2> /dev/null
+ mdadm --zero $devlist 2> /dev/null
+ # source script in a subshell, so it has access to our
+ # namespace, but cannot change it.
+ echo -ne "$_script... "
+ if ( set -ex ; . $_script ) 2> $targetdir/log
+ then
+ echo "succeeded"
+ _fail=0
+ else
+ echo "FAILED - see $targetdir/log for details"
+ _fail=1
+ fi
+ if [ "$savelogs" == "1" ]; then
+ cp $targetdir/log $logdir/$_basename.log
+ fi
+ if [ "$_fail" == "1" -a "$exitonerror" == "1" ]; then
+ exit 1
+ fi
+ fi
}
-reset_environment() {
- if [ -f $1 ]; then
- reset_env
- unset setup_env
- unset reset_env
- fi
+do_help() {
+ echo "Usage: $0 [options]"
+ echo " Options:"
+ echo " --tests=<test1,test2,..> Comma separated list of tests to run"
+ echo " --disable-multipath Disable any tests involving multipath"
+ echo " --logdir=<directory> Directory to save logfiles in"
+ echo " --save-logs Save all logs in <logdir>"
+ echo " --no-error Don't stop on error, ie. run all tests"
+ echo " setup Setup test environment and exit"
+ echo " cleanup Cleanup test environment"
+ echo " <prefix> Run tests with <prefix>"
}
-for script in tests/$prefix tests/$prefix*[^~]
-do
- if [ -f "$script" ]
- then
- rm -f $targetdir/stderr
- # stop all arrays, just incase some script left an array active.
- $mdadm -Ssq 2> /dev/null
- mdadm --zero $devlist 2> /dev/null
- mdadm --zero $devlist 2> /dev/null
- environment="tests/env-`basename $script`"
- setup_environment $environment
- # source script in a subshell, so it has access to our
- # namespace, but cannot change it.
- echo -ne "$script... "
- if ( set -ex ; . $script ) 2> $targetdir/log
- then echo "succeeded"
- else echo "FAILED"
- reset_environment $environment
- exit 1
- fi
- reset_environment $environment
- fi
+parse_args() {
+ for i in $*
+ do
+ case $i in
+ [0-9]*)
+ prefix=$i
+ ;;
+ setup)
+ echo "mdadm test environment setup"
+ do_setup
+ trap 0; exit 0
+ ;;
+ cleanup)
+ cleanup
+ exit 0
+ ;;
+ --tests=*)
+ TESTLIST=`expr "x$i" : 'x[^=]*=\(.*\)' | sed -e 's/,/ /g'`
+ ;;
+ --logdir=*)
+ logdir=`expr "x$i" : 'x[^=]*=\(.*\)'`
+ ;;
+ --save-logs)
+ savelogs=1
+ if [ ! -d $logdir ] ; then
+ mkdir $logdir
+ if [ $? -ne 0 ] ; then
+ exit 1;
+ fi
+ fi
+ ;;
+ --no-error)
+ exitonerror=0
+ ;;
+ --disable-multipath)
+ unset MULTIPATH
+ ;;
+ --help)
+ do_help
+ exit 0;
+ ;;
+ -*)
+ echo " $0: Unknown argument: $i"
+ do_help
+ exit 0;
+ ;;
+ esac
done
+}
+
+parse_args $@
+
+do_setup
+
+if [ "$savelogs" == "1" ]; then
+ echo "Saving logs to $logdir"
+fi
+
+if [ "x$TESTLIST" != "x" ]; then
+ for script in $TESTLIST
+ do
+ do_test $testdir/$script
+ done
+else
+ for script in $testdir/$prefix $testdir/$prefix*[^~]
+ do
+ do_test $script
+ done
+fi
exit 0
projects / thirdparty / mdadm.git / blobdiff