INSTALL

   1
   2  OPENSSL INSTALLATION
   3  --------------------
   4
   5  [This document describes installation on the main supported operating
   6   systems, currently the Linux/Unix family, OpenVMS and Windows.
   7   Installation on DOS (with djgpp), MacOS (before MacOS X)
   8   is described in INSTALL.DJGPP or INSTALL.MacOS, respectively.]
   9
  10  To install OpenSSL, you will need:
  11
  12   * make
  13   * Perl 5 with core modules (please read README.PERL)
  14   * The perl module Text::Template (please read README.PERL)
  15   * an ANSI C compiler
  16   * a development environment in the form of development libraries and C
  17     header files
  18   * a supported operating system
  19
  20  For additional platform specific requirements and other details,
  21  please read one of these:
  22
  23   * NOTES.VMS (OpenVMS)
  24   * NOTES.WIN (any Windows except for Windows CE)
  25
  26  Quick Start
  27  -----------
  28
  29  If you want to just get on with it, do:
  30
  31   on Unix:
  32
  33     $ ./config
  34     $ make
  35     $ make test
  36     $ make install
  37
  38   on OpenVMS:
  39
  40     $ @config
  41     $ mms
  42     $ mms test
  43     $ mms install
  44
  45   on Windows (only pick one of the targets for configuration):
  46
  47     $ perl Configure { VC-WIN32 | VC-WIN64A | VC-WIN64I | VC-CE }
  48     $ nmake
  49     $ nmake test
  50     $ nmake install
  51
  52  [If any of these steps fails, see section Installation in Detail below.]
  53
  54  This will build and install OpenSSL in the default location, which is:
  55
  56   Unix:    normal installation directories under /usr/local
  57   OpenVMS: SYS$COMMON:[OPENSSL-'version'...], where 'version' is the
  58            OpenSSL version number with underscores instead of periods.
  59   Windows: C:\Program Files\OpenSSL or C:\Program Files (x86)\OpenSSL
  60
  61  If you want to install it anywhere else, run config like this:
  62
  63   On Unix:
  64
  65     $ ./config --prefix=/opt/openssl --openssldir=/usr/local/ssl
  66
  67   On OpenVMS:
  68
  69     $ @config --prefix=PROGRAM:[INSTALLS] --openssldir=SYS$MANAGER:[OPENSSL]
  70
  71
  72  Configuration Options
  73  ---------------------
  74
  75  There are several options to ./config (or ./Configure) to customize
  76  the build (note that for Windows, the defaults for --prefix and
  77  --openssldir depend in what configuration is used and what Windows
  78  implementation OpenSSL is built on.  More notes on this in NOTES.WIN):
  79
  80   --prefix=DIR
  81                    The top of the installation directory tree.  Defaults are:
  82
  83                    Unix:           /usr/local
  84                    Windows:        C:\Program Files\OpenSSL
  85                                 or C:\Program Files (x86)\OpenSSL
  86                    OpenVMS:        SYS$COMMON:[OPENSSL-'version']
  87
  88   --openssldir=DIR
  89                    Directory for OpenSSL configuration files, and also the
  90                    default certificate and key store.  Defaults are:
  91
  92                    Unix:           /usr/local/ssl
  93                    Windows:        C:\Program Files\Common Files\SSL
  94                                 or C:\Program Files (x86)\Common Files\SSL
  95                    OpenVMS:        SYS$COMMON:[OPENSSL-COMMON]
  96
  97   --api=x.y.z
  98                    Don't build with support for deprecated APIs below the
  99                    specified version number. For example "--api=1.1.0" will
 100                    remove support for all APIS that were deprecated in OpenSSL
 101                    version 1.1.0 or below.
 102
 103   no-afalgeng
 104                    Don't build the AFALG engine. This option will be forced if
 105                    on a platform that does not support AFALG.
 106
 107   no-asm
 108                    Do not use assembler code. On some platforms a small amount
 109                    of assembler code may still be used.
 110
 111   no-async
 112                    Do not build support for async operations.
 113
 114   no-autoalginit
 115                    Don't automatically load all supported ciphers and digests.
 116                    Typically OpenSSL will make available all of its supported
 117                    ciphers and digests. For a statically linked application this
 118                    may be undesirable if small executable size is an objective.
 119                    This only affects libcrypto. Ciphers and digests will have to
 120                    be loaded manually using EVP_add_cipher() and
 121                    EVP_add_digest() if this option is used. This option will
 122                    force a non-shared build.
 123
 124   no-autoerrinit
 125                    Don't automatically load all libcrypto/libssl error strings.
 126                    Typically OpenSSL will automatically load human readable
 127                    error strings. For a statically linked application this may
 128                    be undesirable if small executable size is an objective.
 129
 130
 131   no-capieng
 132                    Don't build the CAPI engine. This option will be forced if
 133                    on a platform that does not support CAPI.
 134
 135   no-cms
 136                    Don't build support for CMS features
 137
 138   no-comp
 139                    Don't build support for SSL/TLS compression. If this option
 140                    is left enabled (the default), then compression will only
 141                    work if the zlib or zlib-dynamic options are also chosen.
 142
 143   enable-crypto-mdebug
 144                    Build support for debugging memory allocated via
 145                    OPENSSL_malloc() or OPENSSL_zalloc().
 146
 147   enable-crypto-mdebug-backtrace
 148                    As for crypto-mdebug, but additionally provide backtrace
 149                    information for allocated memory.
 150
 151   no-ct
 152                    Don't build support for Certificate Transparency.
 153
 154   no-deprecated
 155                    Don't build with support for any deprecated APIs. This is the
 156                    same as using "--api" and supplying the latest version
 157                    number.
 158
 159   no-dgram
 160                    Don't build support for datagram based BIOs. Selecting this
 161                    option will also force the disabling of DTLS.
 162
 163   no-dso
 164                    Don't build support for loading Dynamic Shared Objects.
 165
 166   no-dynamic-engine
 167                    Don't build the dynamically loaded engines. This only has an
 168                    effect in a "shared" build
 169
 170   no-ec
 171                    Don't build support for Elliptic Curves.
 172
 173   no-ec2m
 174                    Don't build support for binary Elliptic Curves
 175
 176   enable-ec_nistp_64_gcc_128
 177                    Enable support for optimised implementations of some commonly
 178                    used NIST elliptic curves. This is only supported on some
 179                    platforms.
 180
 181   enable-egd
 182                    Build support for gathering entropy from EGD (Entropy
 183                    Gathering Daemon).
 184
 185   no-engine
 186                    Don't build support for loading engines.
 187
 188   no-err
 189                    Don't compile in any error strings.
 190
 191   no-filenames
 192                    Don't compile in filename and line number information (e.g.
 193                    for errors and memory allocation).
 194
 195   no-gost
 196                    Don't build support for GOST based ciphersuites. Note that
 197                    if this feature is enabled then GOST ciphersuites are only
 198                    available if the GOST algorithms are also available through
 199                    loading an externally supplied engine.
 200
 201   enable-heartbeats
 202                    Build support for DTLS heartbeats.
 203
 204   no-hw-padlock
 205                    Don't build the padlock engine.
 206
 207   no-makedepend
 208                    Don't generate dependencies.
 209
 210   no-multiblock
 211                    Don't build support for writing multiple records in one
 212                    go in libssl (Note: this is a different capability to the
 213                    pipelining functionality).
 214
 215   no-nextprotoneg
 216                    Don't build support for the NPN TLS extension.
 217
 218   no-ocsp
 219                    Don't build support for OCSP.
 220
 221   no-pic
 222                    Don't build with support for Position Independent Code.
 223
 224   no-posix-io
 225                    Don't use POSIX IO capabilities.
 226
 227   no-psk
 228                    Don't build support for Pre-Shared Key based ciphersuites.
 229
 230   no-rdrand
 231                    Don't use hardware RDRAND capabilities.
 232
 233   no-rfc3779
 234                    Don't build support for RFC3779 ("X.509 Extensions for IP
 235                    Addresses and AS Identifiers")
 236
 237   sctp
 238                    Build support for SCTP
 239
 240   no-shared
 241                    Do not create shared libraries, only static ones.  See "Note
 242                    on shared libraries" below.
 243
 244   no-sock
 245                    Don't build support for socket BIOs
 246
 247   no-srp
 248                    Don't build support for SRP or SRP based ciphersuites.
 249
 250   no-srtp
 251                    Don't build SRTP support
 252
 253   no-sse2
 254                    Exclude SSE2 code paths. Normally SSE2 extension is
 255                    detected at run-time, but the decision whether or not the
 256                    machine code will be executed is taken solely on CPU
 257                    capability vector. This means that if you happen to run OS
 258                    kernel which does not support SSE2 extension on Intel P4
 259                    processor, then your application might be exposed to
 260                    "illegal instruction" exception. There might be a way
 261                    to enable support in kernel, e.g. FreeBSD kernel can be
 262                    compiled with CPU_ENABLE_SSE, and there is a way to
 263                    disengage SSE2 code pathes upon application start-up,
 264                    but if you aim for wider "audience" running such kernel,
 265                    consider no-sse2. Both the 386 and no-asm options imply
 266                    no-sse2.
 267
 268   enable-ssl-trace
 269                    Build with the SSL Trace capabilities (adds the "-trace"
 270                    option to s_client and s_server).
 271
 272   no-static-engine
 273                    Don't build the statically linked engines. This only
 274                    has an impact when not built "shared".
 275
 276   no-stdio
 277                    Don't use any C "stdio" features. Only libcrypto and libssl
 278                    can be built in this way. Using this option will suppress
 279                    building the command line applications. Additionally since
 280                    the OpenSSL tests also use the command line applications the
 281                    tests will also be skipped.
 282
 283   no-threads
 284                    Don't try to build with support for multi-threaded
 285                    applications.
 286
 287   threads
 288                    Build with support for multi-threaded applications. Most
 289                    platforms will enable this by default. However if on a
 290                    platform where this is not the case then this will usually
 291                    require additional system-dependent options! See "Note on
 292                    multi-threading" below.
 293
 294   no-ts
 295                    Don't build Time Stamping Authority support.
 296
 297   no-ui
 298                    Don't build with the "UI" capability (i.e. the set of
 299                    features enabling text based prompts).
 300
 301   enable-unit-test
 302                    Enable additional unit test APIs. This should not typically
 303                    be used in production deployments.
 304
 305   enable-weak-ssl-ciphers
 306                    Build support for SSL/TLS ciphers that are considered "weak"
 307                    (e.g. RC4 based ciphersuites).
 308
 309   zlib
 310                    Build with support for zlib compression/decompression.
 311
 312   zlib-dynamic
 313                    Like "zlib", but has OpenSSL load the zlib library
 314                    dynamically when needed.  This is only supported on systems
 315                    where loading of shared libraries is supported.
 316
 317   386
 318                    On Intel hardware, use the 80386 instruction set only
 319                    (the default x86 code is more efficient, but requires at
 320                    least a 486). Note: Use compiler flags for any other CPU
 321                    specific configuration, e.g. "-m32" to build x86 code on
 322                    an x64 system.
 323
 324   no-<prot>
 325                    Don't build support for negotiating the specified SSL/TLS
 326                    protocol (one of ssl, ssl3, tls, tls1, tls1_1, tls1_2, dtls,
 327                    dtls1 or dtls1_2). If "no-tls" is selected then all of tls1,
 328                    tls1_1 and tls1_2 are disabled. Similarly "no-dtls" will
 329                    disable dtls1 and dtls1_2. The "no-ssl" option is synonymous
 330                    with "no-ssl3". Note this only affects version negotiation.
 331                    OpenSSL will still provide the methods for applications to
 332                    explicitly select the individual protocol versions.
 333
 334   no-<prot>-method
 335                    As for no-<prot> but in addition do not build the methods for
 336                    applications to explicitly select individual protocol
 337                    versions.
 338
 339   enable-<alg>
 340                    Build with support for the specified algorithm, where <alg>
 341                    is one of: md2 or rc5.
 342
 343   no-<alg>
 344                    Build without support for the specified algorithm, where
 345                    <alg> is one of: bf, blake2, camellia, cast, chacha, cmac,
 346                    des, dh, dsa, ecdh, ecdsa, idea, md4, md5, mdc2, ocb,
 347                    ploy1305, rc2, rc4, rmd160, scrypt, seed or whirlpool. The
 348                    "ripemd" algorithm is deprecated and if used is synonymous
 349                    with rmd160.
 350
 351   -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx
 352                    These system specific options will be passed through to the
 353                    compiler to allow you to define preprocessor symbols, specify
 354                    additional libraries, library directories or other compiler
 355                    options.
 356
 357
 358  Installation in Detail
 359  ----------------------
 360
 361  1a. Configure OpenSSL for your operation system automatically:
 362
 363      NOTE: This is not available on Windows.
 364
 365        $ ./config [options]                             # Unix
 366
 367        or
 368
 369        $ @config [options]                              ! OpenVMS
 370
 371      For the remainder of this text, the Unix form will be used in all
 372      examples, please use the appropriate form for your platform.
 373
 374      This guesses at your operating system (and compiler, if necessary) and
 375      configures OpenSSL based on this guess. Run ./config -t to see
 376      if it guessed correctly. If you want to use a different compiler, you
 377      are cross-compiling for another platform, or the ./config guess was
 378      wrong for other reasons, go to step 1b. Otherwise go to step 2.
 379
 380      On some systems, you can include debugging information as follows:
 381
 382        $ ./config -d [options]
 383
 384  1b. Configure OpenSSL for your operating system manually
 385
 386      OpenSSL knows about a range of different operating system, hardware and
 387      compiler combinations. To see the ones it knows about, run
 388
 389        $ ./Configure                                    # Unix
 390
 391        or
 392
 393        $ perl Configure                                 # All other platforms
 394
 395      For the remainder of this text, the Unix form will be used in all
 396      examples, please use the appropriate form for your platform.
 397
 398      Pick a suitable name from the list that matches your system. For most
 399      operating systems there is a choice between using "cc" or "gcc".  When
 400      you have identified your system (and if necessary compiler) use this name
 401      as the argument to Configure. For example, a "linux-elf" user would
 402      run:
 403
 404        $ ./Configure linux-elf [options]
 405
 406      If your system isn't listed, you will have to create a configuration
 407      file named Configurations/{something}.conf and add the correct
 408      configuration for your system. See the available configs as examples
 409      and read Configurations/README and Configurations/README.design for
 410      more information.
 411
 412      The generic configurations "cc" or "gcc" should usually work on 32 bit
 413      Unix-like systems.
 414
 415      Configure creates a build file ("Makefile" on Unix and "descrip.mms"
 416      on OpenVMS) from a suitable template in Configurations, and
 417      defines various macros in crypto/opensslconf.h (generated from
 418      crypto/opensslconf.h.in).
 419
 420  1c. Configure OpenSSL for building outside of the source tree.
 421
 422      OpenSSL can be configured to build in a build directory separate from
 423      the directory with the source code.  It's done by placing yourself in
 424      some other directory and invoking the configuration commands from
 425      there.
 426
 427      Unix example:
 428
 429        $ mkdir /var/tmp/openssl-build
 430        $ cd /var/tmp/openssl-build
 431        $ /PATH/TO/OPENSSL/SOURCE/config [options]
 432
 433        or
 434
 435        $ /PATH/TO/OPENSSL/SOURCE/Configure [target] [options]
 436
 437      OpenVMS example:
 438
 439        $ set default sys$login:
 440        $ create/dir [.tmp.openssl-build]
 441        $ set default [.tmp.openssl-build]
 442        $ @[PATH.TO.OPENSSL.SOURCE]config {options}
 443
 444        or
 445
 446        $ @[PATH.TO.OPENSSL.SOURCE]Configure {target} {options}
 447
 448      Windows example:
 449
 450        $ C:
 451        $ mkdir \temp-openssl
 452        $ cd \temp-openssl
 453        $ perl d:\PATH\TO\OPENSSL\SOURCE\Configure {target} {options}
 454
 455      Paths can be relative just as well as absolute.  Configure will
 456      do its best to translate them to relative paths whenever possible.
 457
 458   2. Build OpenSSL by running:
 459
 460        $ make                                           # Unix
 461        $ mms                                            ! (or mmk) OpenVMS
 462        $ nmake                                          # Windows
 463
 464      This will build the OpenSSL libraries (libcrypto.a and libssl.a on
 465      Unix, corresponding on other platforms) and the OpenSSL binary
 466      ("openssl"). The libraries will be built in the top-level directory,
 467      and the binary will be in the "apps" subdirectory.
 468
 469      If the build fails, look at the output.  There may be reasons for
 470      the failure that aren't problems in OpenSSL itself (like missing
 471      standard headers).  If it is a problem with OpenSSL itself, please
 472      report the problem to <rt@openssl.org> (note that your message
 473      will be recorded in the request tracker publicly readable at
 474      https://www.openssl.org/community/index.html#bugs and will be
 475      forwarded to a public mailing list). Please check out the request
 476      tracker. Maybe the bug was already reported or has already been
 477      fixed.
 478
 479      [If you encounter assembler error messages, try the "no-asm"
 480      configuration option as an immediate fix.]
 481
 482      Compiling parts of OpenSSL with gcc and others with the system
 483      compiler will result in unresolved symbols on some systems.
 484
 485   3. After a successful build, the libraries should be tested. Run:
 486
 487        $ make test                                      # Unix
 488        $ mms test                                       ! OpenVMS
 489        $ nmake test                                     # Windows
 490
 491      If some tests fail, look at the output.  There may be reasons for
 492      the failure that isn't a problem in OpenSSL itself (like a
 493      malfunction with Perl).  You may want increased verbosity, that
 494      can be accomplished like this:
 495
 496        $ make VERBOSE=1 test                            # Unix
 497
 498        $ mms /macro=(VERBOSE=1) test                    ! OpenVMS
 499
 500        $ nmake VERBOSE=1 test                           # Windows
 501
 502      If you want to run just one or a few specific tests, you can use
 503      the make variable TESTS to specify them, like this:
 504
 505        $ make TESTS='test_rsa test_dsa' test            # Unix
 506        $ mms/macro="TESTS=test_rsa test_dsa" test       ! OpenVMS
 507        $ nmake TESTS='test_rsa test_dsa' test           # Windows
 508
 509      And of course, you can combine (Unix example shown):
 510
 511        $ make VERBOSE=1 TESTS='test_rsa test_dsa' test
 512
 513      You can find the list of available tests like this:
 514
 515        $ make list-tests                                # Unix
 516        $ mms list-tests                                 ! OpenVMS
 517        $ nmake list-tests                               # Windows
 518
 519      Have a look at the manual for the perl module Test::Harness to
 520      see what other HARNESS_* variables there are.
 521
 522      If you find a problem with OpenSSL itself, try removing any
 523      compiler optimization flags from the CFLAGS line in Makefile and
 524      run "make clean; make" or corresponding.
 525
 526      Please send a bug reports to <rt@openssl.org>.
 527
 528   4. If everything tests ok, install OpenSSL with
 529
 530        $ make install                                   # Unix
 531        $ mms install                                    ! OpenVMS
 532
 533      This will install all the software components in this directory
 534      tree under PREFIX (the directory given with --prefix or its
 535      default):
 536
 537        Unix:
 538
 539          bin/           Contains the openssl binary and a few other
 540                         utility scripts.
 541          include/openssl
 542                         Contains the header files needed if you want
 543                         to build your own programs that use libcrypto
 544                         or libssl.
 545          lib            Contains the OpenSSL library files.
 546          lib/engines    Contains the OpenSSL dynamically loadable engines.
 547          share/man/{man1,man3,man5,man7}
 548                         Contains the OpenSSL man-pages.
 549          share/doc/openssl/html/{man1,man3,man5,man7}
 550                         Contains the HTML rendition of the man-pages.
 551
 552        OpenVMS ('arch' is replaced with the architecture name, "Alpha"
 553        or "ia64"):
 554
 555          [.EXE.'arch']  Contains the openssl binary and a few other
 556                         utility scripts.
 557          [.include.openssl]
 558                         Contains the header files needed if you want
 559                         to build your own programs that use libcrypto
 560                         or libssl.
 561          [.LIB.'arch']  Contains the OpenSSL library files.
 562          [.ENGINES.'arch']
 563                         Contains the OpenSSL dynamically loadable engines.
 564          [.SYS$STARTUP] Contains startup, login and shutdown scripts.
 565                         These define appropriate logical names and
 566                         command symbols.
 567
 568
 569      Additionally, install will add the following directories under
 570      OPENSSLDIR (the directory given with --openssldir or its default)
 571      for you convenience:
 572
 573          certs          Initially empty, this is the default location
 574                         for certificate files.
 575          private        Initially empty, this is the default location
 576                         for private key files.
 577          misc           Various scripts.
 578
 579      Package builders who want to configure the library for standard
 580      locations, but have the package installed somewhere else so that
 581      it can easily be packaged, can use
 582
 583        $ make DESTDIR=/tmp/package-root install         # Unix
 584        $ mms/macro="DESTDIR=TMP:[PACKAGE-ROOT]" install ! OpenVMS
 585
 586      The specified destination directory will be prepended to all
 587      installation target paths.
 588
 589   Compatibility issues with previous OpenSSL versions:
 590
 591   *  COMPILING existing applications
 592
 593      OpenSSL 1.1 hides a number of structures that were previously
 594      open.  This includes all internal libssl structures and a number
 595      of EVP types.  Accessor functions have been added to allow
 596      controlled access to the structures' data.
 597
 598      This means that some software needs to be rewritten to adapt to
 599      the new ways of doing things.  This often amounts to allocating
 600      an instance of a structure explicitly where you could previously
 601      allocate them on the stack as automatic variables, and using the
 602      provided accessor functions where you would previously access a
 603      structure's field directly.
 604
 605      <TBA>
 606
 607      Some APIs have changed as well.  However, older APIs have been
 608      preserved when possible.
 609
 610
 611  Note on multi-threading
 612  -----------------------
 613
 614  For some systems, the OpenSSL Configure script knows what compiler options
 615  are needed to generate a library that is suitable for multi-threaded
 616  applications.  On these systems, support for multi-threading is enabled
 617  by default; use the "no-threads" option to disable (this should never be
 618  necessary).
 619
 620  On other systems, to enable support for multi-threading, you will have
 621  to specify at least two options: "threads", and a system-dependent option.
 622  (The latter is "-D_REENTRANT" on various systems.)  The default in this
 623  case, obviously, is not to include support for multi-threading (but
 624  you can still use "no-threads" to suppress an annoying warning message
 625  from the Configure script.)
 626
 627  OpenSSL provides built-in support for two threading models: pthreads (found on
 628  most UNIX/Linux systems), and Windows threads. No other threading models are
 629  supported. If your platform does not provide pthreads or Windows threads then
 630  you should Configure with the "no-threads" option.
 631
 632  Note on shared libraries
 633  ------------------------
 634
 635  For most systems the OpenSSL Configure script knows what is needed to
 636  build shared libraries for libcrypto and libssl. On these systems
 637  the shared libraries will be created by default. This can be suppressed and
 638  only static libraries created by using the "no-shared" option. On systems
 639  where OpenSSL does not know how to build shared libraries the "no-shared"
 640  option will be forced and only static libraries will be created.
 641
 642  Note on random number generation
 643  --------------------------------
 644
 645  Availability of cryptographically secure random numbers is required for
 646  secret key generation. OpenSSL provides several options to seed the
 647  internal PRNG. If not properly seeded, the internal PRNG will refuse
 648  to deliver random bytes and a "PRNG not seeded error" will occur.
 649  On systems without /dev/urandom (or similar) device, it may be necessary
 650  to install additional support software to obtain random seed.
 651  Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
 652  and the FAQ for more information.
 653