3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX
="debug-";;
34 -h*) TEST
="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options
=$options" $i" ;;
49 # First get uname entries that we use below
51 [ "$MACHINE" ] || MACHINE
=`(uname -m) 2>/dev/null` || MACHINE
="unknown"
52 [ "$RELEASE" ] || RELEASE
=`(uname -r) 2>/dev/null` || RELEASE
="unknown"
53 [ "$SYSTEM" ] || SYSTEM
=`(uname -s) 2>/dev/null` || SYSTEM
="unknown"
54 [ "$BUILD" ] || VERSION
=`(uname -v) 2>/dev/null` || VERSION
="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL
=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc
/kconfig
]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0
*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1
*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2
*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x
[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102 # Now we simply scan though... In most cases, the SYSTEM info is enough
104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106 MACHINE
=`echo "$MACHINE" | sed -e 's/-/_/g'`
107 echo "parisc-hp-MPE/iX"; exit 0
110 echo "m68k-apple-aux3"; exit 0
114 echo "${MACHINE}-ibm-aix"; exit 0
118 echo "${MACHINE}-ibm-aix"; exit 0
122 echo "${MACHINE}-ibm-aix3"; exit 0
126 if [ -e /boot
/develop
/headers
/be
/bone
]; then
127 echo "beos-x86-bone"; exit 0
129 echo "beos-x86-r5"; exit 0
134 echo "${MACHINE}-dg-dgux"; exit 0
138 echo "${MACHINE}-hi-hiux"; exit 0
142 HPUXVER
=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
144 1[0-9].
*) # HPUX 10 and 11 targets are unified
145 echo "${MACHINE}-hp-hpux1x"; exit 0
148 echo "${MACHINE}-hp-hpux"; exit 0
154 echo "mips2-sgi-irix"; exit 0
158 echo "mips3-sgi-irix"; exit 0
162 echo "mips4-sgi-irix64"; exit 0
166 echo "${MACHINE}-whatever-linux2"; exit 0
170 echo "${MACHINE}-whatever-linux1"; exit 0
174 echo "hurd-x86"; exit 0;
178 echo "${MACHINE}-lynx-lynxos"; exit 0
181 BSD
/OS
:4.
*) # BSD/OS always says 386
182 echo "i486-whatever-bsdi4"; exit 0
185 BSD
/386:*:*:*486*|BSD
/OS
:*:*:*:*486*)
186 case `/sbin/sysctl -n hw.model` in
188 echo "i586-whatever-bsdi"; exit 0
191 echo "i386-whatever-bsdi"; exit 0
197 echo "${MACHINE}-whatever-bsdi"; exit 0
201 VERS
=`echo ${RELEASE} | sed -e 's/[-(].*//'`
202 MACH
=`sysctl -n hw.model`
205 *386* ) MACH
="i386" ;;
206 *486* ) MACH
="i486" ;;
207 Pentium\ II
*) MACH
="i686" ;;
208 Pentium
* ) MACH
="i586" ;;
209 * ) MACH
="$MACHINE" ;;
212 i
[0-9]86 ) ARCH
="pc" ;;
214 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
218 echo "${MACHINE}-whatever-freebsd"; exit 0
222 if [ -z ${CROSS_COMPILE} ]; then
223 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
225 echo "${MACHINE}-whatever-netbsd"; exit 0
230 echo "${MACHINE}-whatever-netbsd"; exit 0
234 echo "${MACHINE}-whatever-openbsd"; exit 0
238 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
242 OSFMAJOR
=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
245 echo "${MACHINE}-dec-tru64"; exit 0
248 echo "${MACHINE}-dec-osf"; exit 0
251 echo "${MACHINE}-dec-osf"; exit 0
259 echo "${MACHINE}-whatever-qnx4"
262 echo "${MACHINE}-whatever-qnx6"
265 echo "${MACHINE}-whatever-qnx"
272 echo "i860-intel-osf1"; exit 0
276 echo "ppc-apple-rhapsody"; exit 0
282 echo "ppc-apple-darwin${VERSION}"
285 echo "i686-apple-darwin${VERSION}"
292 echo "${MACHINE}-whatever-solaris2"; exit 0
296 echo "${MACHINE}-sun-sunos4"; exit 0
300 echo "${MACHINE}-whatever-sysv4"; exit 0
304 echo "i386-stratus-vos"; exit 0
308 echo "hppa1.1-stratus-vos"; exit 0
312 echo "${MACHINE}-whatever-sysv4"; exit 0
316 echo "${MACHINE}-whatever-sysv4"; exit 0
319 *:4.0:3.0:3[34]?? |
*:4.0:3.0:3[34]??
,*)
320 echo "i486-ncr-sysv4"; exit 0
324 echo "${MACHINE}-unknown-ultrix"; exit 0
328 echo "${MACHINE}-siemens-sysv4"; exit 0
332 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
336 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
340 echo "${MACHINE}-ncr-sysv4"; exit 0
344 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
348 echo "mips-sony-newsos4"; exit 0;
352 echo "${MACHINE}-whatever-mingw"; exit 0;
357 echo "${MACHINE}-whatever-cygwin_pre1.3"
360 echo "${MACHINE}-whatever-cygwin"
367 echo "t3e-cray-unicosmk"; exit 0;
371 echo "j90-cray-unicos"; exit 0;
375 echo "nsr-tandem-nsk"; exit 0;
379 echo "${MACHINE}-whatever-vxworks"; exit 0;
384 # Ugg. These are all we can determine by what we know about
385 # the output of uname. Be more creative:
388 # Do the Apollo stuff first. Here, we just simply assume
389 # that the existance of the /usr/apollo directory is proof
391 if [ -d /usr
/apollo
]; then
392 echo "whatever-apollo-whatever"
397 ISNEXT
=`hostinfo 2>/dev/null`
400 echo "whatever-next-nextstep3.3"; exit 0
403 echo "whatever-next-nextstep"; exit 0
407 # At this point we gone through all the one's
410 echo "${MACHINE}-whatever-${SYSTEM}"
414 # ---------------------------------------------------------------------------
415 # this is where the translation occurs into SSLeay terms
416 # ---------------------------------------------------------------------------
418 # Only set CC if not supplied already
419 if [ -z "$CROSS_COMPILE$CC" ]; then
420 GCCVER
=`sh -c "gcc -dumpversion" 2>/dev/null`
421 if [ "$GCCVER" != "" ]; then
422 # then strip off whatever prefix egcs prepends the number with...
423 # Hopefully, this will work for any future prefixes as well.
424 GCCVER
=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
425 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
426 # does give us what we want though, so we use that. We just just the
427 # major and minor version numbers.
428 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
429 GCCVER
=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
436 if [ "$SYSTEM" = "HP-UX" ];then
437 # By default gcc is a ILP32 compiler (with long long == 64).
439 if [ $GCCVER -ge 30 ]; then
440 # PA64 support only came in with gcc 3.0.x.
441 # We check if the preprocessor symbol __LP64__ is defined...
442 if echo "__LP64__" | gcc
-v -E -x c
- 2>/dev
/null |
grep "^__LP64__" 2>&1 > /dev
/null
; then
443 : # __LP64__ has slipped through, it therefore is not defined
449 if [ "$SYSTEM" = "SunOS" ]; then
450 if [ $GCCVER -ge 30 ]; then
451 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
452 # to be working, at the very least 'make test' passes...
453 if gcc
-v -E -x c
/dev
/null
2>&1 |
grep __arch64__
> /dev
/null
; then
459 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
460 CCVER
=`(cc -V 2>&1) 2>/dev/null | \
461 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
462 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
464 if [ $MACHINE != i86pc
-a $CCVER -gt 40 ]; then
465 CC
=cc
# overrides gcc!!!
466 if [ $CCVER -eq 50 ]; then
467 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
468 echo " patch #107357-01 or later applied."
474 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
475 # check for Compaq C, expected output is "blah-blah C Vx.x"
476 CCCVER
=`(ccc -V 2>&1) 2>/dev/null | \
477 egrep -e '.* C V[0-9]\.[0-9]' | \
478 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
480 if [ $CCCVER -gt 60 ]; then
481 CC
=ccc
# overrides gcc!!! well, ccc outperforms inoticeably
482 # only on hash routines and des, otherwise gcc (2.95)
483 # keeps along rather tight...
487 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
488 (cc
) 2>&1 |
grep -iv "not found" > /dev
/null
&& CC
=cc
493 # read the output of the embedded GuessOS
496 echo Operating system
: $GUESSOS
498 # now map the output into SSLeay terms ... really should hack into the
499 # script above so we end up with values in vars but that would take
500 # more time that I want to waste at the moment
509 CPU
=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
511 if [ $CPU -ge 4000 ]; then
512 options
="$options -mips2"
517 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
519 #if [ $CPU -ge 5000 ]; then
520 # options="$options -mips4"
522 # options="$options -mips3"
527 echo "WARNING! If you wish to build 64-bit library, then you have to"
528 echo " invoke './Configure irix64-mips4-$CC' *manually*."
529 if [ "$TEST" = "false" -a -t 1 ]; then
530 echo " You have about 5 seconds to press Ctrl-C to abort."
531 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
533 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
535 #if [ $CPU -ge 5000 ]; then
536 # options="$options -mips4"
538 # options="$options -mips3"
542 ppc-apple-rhapsody
) OUT
="rhapsody-ppc-cc" ;;
544 ISA64
=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
545 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
546 echo "WARNING! If you wish to build 64-bit library, then you have to"
547 echo " invoke './Configure darwin64-ppc-cc' *manually*."
548 if [ "$TEST" = "false" -a -t 1 ]; then
549 echo " You have about 5 seconds to press Ctrl-C to abort."
550 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
553 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
554 OUT
="darwin64-ppc-cc"
559 ISA64
=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
560 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
561 echo "WARNING! If you wish to build 64-bit library, then you have to"
562 echo " invoke './Configure darwin64-x86_64-cc' *manually*."
563 if [ "$TEST" = "false" -a -t 1 ]; then
564 echo " You have about 5 seconds to press Ctrl-C to abort."
565 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
568 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
569 OUT
="darwin64-x86_64-cc"
574 options
="$options -arch%20armv6 -arch%20armv7"
575 OUT
="iphoneos-cross" ;;
577 options
="$options -arch%20${MACHINE}"
578 OUT
="iphoneos-cross" ;;
579 arm64-
*-iphoneos|
*-*-ios64)
582 ISA
=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
583 case ${ISA:-generic} in
584 *[678]) OUT
="linux-alpha+bwx-$CC" ;;
585 *) OUT
="linux-alpha-$CC" ;;
587 if [ "$CC" = "gcc" ]; then
588 case ${ISA:-generic} in
589 EV5|EV45
) options
="$options -mcpu=ev5";;
590 EV56|PCA56
) options
="$options -mcpu=ev56";;
591 *) options
="$options -mcpu=ev6";;
596 echo "WARNING! If you wish to build 64-bit library, then you have to"
597 echo " invoke './Configure linux-ppc64' *manually*."
598 if [ "$TEST" = "false" -a -t 1 ]; then
599 echo " You have about 5 seconds to press Ctrl-C to abort."
600 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
604 ppc-
*-linux2) OUT
="linux-ppc" ;;
605 ppc60x-
*-vxworks*) OUT
="vxworks-ppc60x" ;;
606 ppcgen-
*-vxworks*) OUT
="vxworks-ppcgen" ;;
607 pentium-
*-vxworks*) OUT
="vxworks-pentium" ;;
608 simlinux-
*-vxworks*) OUT
="vxworks-simlinux" ;;
609 mips-
*-vxworks*) OUT
="vxworks-mips";;
610 ia64-
*-linux?
) OUT
="linux-ia64" ;;
612 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
613 echo " and wish to build 64-bit library, then you have to"
614 echo " invoke './Configure linux64-sparcv9' *manually*."
615 if [ "$TEST" = "false" -a -t 1 ]; then
616 echo " You have about 5 seconds to press Ctrl-C to abort."
617 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
619 OUT
="linux-sparcv9" ;;
621 KARCH
=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
622 case ${KARCH:-sun4} in
623 sun4u
*) OUT
="linux-sparcv9" ;;
624 sun4m
) OUT
="linux-sparcv8" ;;
625 sun4d
) OUT
="linux-sparcv8" ;;
626 *) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
629 # 64-bit builds under parisc64 linux are not supported and
630 # compiler is expected to generate 32-bit objects...
631 CPUARCH
=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
632 CPUSCHEDULE
=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
634 # ??TODO ?? Model transformations
635 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
636 # assuming no further arch. identification will ever be used by GCC.
637 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
638 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
639 # for these chips in the future.
640 # PA7300LC -> 7100LC (1.1)
641 # PA8200 -> 8000 (2.0)
642 # PA8500 -> 8000 (2.0)
643 # PA8600 -> 8000 (2.0)
645 CPUSCHEDULE
=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
646 # Finish Model transformations
648 options
="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
649 OUT
="linux-generic32" ;;
650 armv
[1-3]*-*-linux2) OUT
="linux-generic32" ;;
651 armv
[7-9]*-*-linux2) OUT
="linux-armv4"; options
="$options -march=armv7-a" ;;
652 arm
*-*-linux2) OUT
="linux-armv4" ;;
653 sh
*b-
*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
654 sh
*-*-linux2) OUT
="linux-generic32"; options
="$options -DL_ENDIAN" ;;
655 m68k
*-*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
656 s390-
*-linux2) OUT
="linux-generic32"; options
="$options -DB_ENDIAN" ;;
658 # To be uncommented when glibc bug is fixed, see Configure...
659 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
660 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
661 # echo " have to invoke './Configure linux32-s390x' *manually*."
662 # if [ "$TEST" = "false" -a -t -1 ]; then
663 # echo " You have about 5 seconds to press Ctrl-C to abort."
664 # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
669 x86_64-
*-linux?
) OUT
="linux-x86_64" ;;
670 *86-*-linux2) OUT
="linux-elf"
671 if [ "$GCCVER" -gt 28 ]; then
672 if grep '^model.*Pentium' /proc
/cpuinfo
>/dev
/null
; then
673 options
="$options -march=pentium"
675 if grep '^model.*Pentium Pro' /proc
/cpuinfo
>/dev
/null
; then
676 options
="$options -march=pentiumpro"
678 if grep '^model.*K6' /proc
/cpuinfo
>/dev
/null
; then
679 options
="$options -march=k6"
682 *-*-linux1) OUT
="linux-aout" ;;
683 *-*-linux2) OUT
="linux-generic32" ;;
684 sun4
[uv
]*-*-solaris2)
685 OUT
="solaris-sparcv9-$CC"
686 ISA64
=`(isalist) 2>/dev/null | grep sparcv9`
687 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
688 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
689 echo "WARNING! If you wish to build 64-bit library, then you have to"
690 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
691 if [ "$TEST" = "false" -a -t 1 ]; then
692 echo " You have about 5 seconds to press Ctrl-C to abort."
693 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
695 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
696 # $GCC_ARCH denotes default ABI chosen by compiler driver
697 # (first one found on the $PATH). I assume that user
698 # expects certain consistency with the rest of his builds
699 # and therefore switch over to 64-bit. <appro>
700 OUT
="solaris64-sparcv9-gcc"
701 echo "WARNING! If you wish to build 32-bit library, then you have to"
702 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
703 if [ "$TEST" = "false" -a -t 1 ]; then
704 echo " You have about 5 seconds to press Ctrl-C to abort."
705 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
707 elif [ "$GCC_ARCH" = "-m32" ]; then
708 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
709 echo " and wish to build 64-bit library, then you have to"
710 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
711 if [ "$TEST" = "false" -a -t 1 ]; then
712 echo " You have about 5 seconds to press Ctrl-C to abort."
713 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
717 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
718 OUT
="solaris64-sparcv9-$CC"
721 sun4m-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
722 sun4d-
*-solaris2) OUT
="solaris-sparcv8-$CC" ;;
723 sun4
*-*-solaris2) OUT
="solaris-sparcv7-$CC" ;;
725 ISA64
=`(isalist) 2>/dev/null | grep amd64`
726 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
727 OUT
="solaris64-x86_64-$CC"
729 OUT
="solaris-x86-$CC"
730 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
731 options
="$options no-sse2"
735 *-*-sunos4) OUT
="sunos-$CC" ;;
737 *86*-*-bsdi4) OUT
="BSD-x86-elf"; options
="$options no-sse2 -ldl" ;;
738 alpha
*-*-*bsd
*) OUT
="BSD-generic64"; options
="$options -DL_ENDIAN" ;;
739 powerpc64-
*-*bsd
*) OUT
="BSD-generic64"; options
="$options -DB_ENDIAN" ;;
740 sparc64-
*-*bsd
*) OUT
="BSD-sparc64" ;;
741 ia64-
*-*bsd
*) OUT
="BSD-ia64" ;;
742 amd64-
*-*bsd
*) OUT
="BSD-x86_64" ;;
743 *86*-*-*bsd
*) if [ -z ${CROSS_COMPILE} ]; then
744 # mimic ld behaviour when it's looking for libc...
745 if [ -L /usr
/lib
/libc.so
]; then # [Free|Net]BSD
746 libc
=/usr
/lib
/libc.so
748 # ld searches for highest libc.so.* and so do we
749 libc
=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null`
752 case "`(file -L $libc) 2>/dev/null`" in
753 *ELF
*) OUT
="BSD-x86-elf" ;;
754 *) OUT
="BSD-x86"; options
="$options no-sse2" ;;
759 ppc85xx-
*-*bsd
*) OUT
="BSD-ppc85xx" ;; # MPC85XX has no hardware FP accelerator
760 *-*-*bsd
*) OUT
="BSD-generic32" ;;
762 *-*-osf) OUT
="osf1-alpha-cc" ;;
763 *-*-tru64) OUT
="tru64-alpha-cc" ;;
765 if [ "$CC" = "gcc" ]; then
766 OUT
="unixware-7-gcc" ; options
="$options no-sse2"
768 OUT
="unixware-7" ; options
="$options no-sse2 -D__i386__"
771 *-*-[Uu
]nix
[Ww
]are20
*) OUT
="unixware-2.0"; options
="$options no-sse2 no-sha512" ;;
772 *-*-[Uu
]nix
[Ww
]are21
*) OUT
="unixware-2.1"; options
="$options no-sse2 no-sha512" ;;
774 options
="$options no-threads no-shared no-asm no-dso"
777 BS2000-siemens-sysv4
) OUT
="BS2000-OSD" ;;
778 RM
*-siemens-sysv4) OUT
="ReliantUNIX" ;;
779 *-siemens-sysv4) OUT
="SINIX" ;;
781 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
782 OUT
="hpux64-parisc2-gcc"
784 [ "$KERNEL_BITS" ] || KERNEL_BITS
=`(getconf KERNEL_BITS) 2>/dev/null`
785 KERNEL_BITS
=${KERNEL_BITS:-32}
786 CPU_VERSION
=`(getconf CPU_VERSION) 2>/dev/null`
787 CPU_VERSION
=${CPU_VERSION:-0}
788 # See <sys/unistd.h> for further info on CPU_VERSION.
789 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
790 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
795 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
796 OUT
=${OUT:-"hpux-parisc2-${CC}"}
797 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
798 echo "WARNING! If you wish to build 64-bit library then you have to"
799 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
800 if [ "$TEST" = "false" -a -t 1 ]; then
801 echo " You have about 5 seconds to press Ctrl-C to abort."
802 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
805 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
806 OUT
="hpux-parisc-${CC}"
807 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
808 OUT
="hpux-parisc-${CC}"
809 else # Motorola(?) CPU
812 options
="$options -D_REENTRANT" ;;
813 *-hpux) OUT
="hpux-parisc-$CC" ;;
815 [ "$KERNEL_BITS" ] || KERNEL_BITS
=`(getconf KERNEL_BITMODE) 2>/dev/null`
816 KERNEL_BITS
=${KERNEL_BITS:-32}
817 OBJECT_MODE
=${OBJECT_MODE:-32}
818 if [ "$CC" = "gcc" ]; then
820 if [ $OBJECT_MODE -eq 64 ]; then
821 echo 'Your $OBJECT_MODE was found to be set to 64'
824 elif [ $OBJECT_MODE -eq 64 ]; then
825 echo 'Your $OBJECT_MODE was found to be set to 64'
829 if [ $KERNEL_BITS -eq 64 ]; then
830 echo "WARNING! If you wish to build 64-bit kit, then you have to"
831 echo " invoke './Configure aix64-cc' *manually*."
832 if [ "$TEST" = "false" -a -t 1 ]; then
833 echo " You have ~5 seconds to press Ctrl-C to abort."
834 (trap "stty `stty -g`" 2 0; stty
-icanon min
0 time 50; read waste
) <&1
838 if (lsattr
-E -O -l `lsdev -c processor|awk '{print$1;exit}'` |
grep -i powerpc
) >/dev
/null
2>&1; then
839 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
841 options
="$options no-asm"
844 # these are all covered by the catchall below
845 # *-dgux) OUT="dgux" ;;
846 mips-sony-newsos4
) OUT
="newsos4-gcc" ;;
847 *-*-cygwin_pre1.3
) OUT
="Cygwin-pre1.3" ;;
848 *-*-cygwin) OUT
="Cygwin" ;;
849 t3e-cray-unicosmk
) OUT
="cray-t3e" ;;
850 j90-cray-unicos
) OUT
="cray-j90" ;;
851 nsr-tandem-nsk
) OUT
="tandem-c89" ;;
852 beos-
*) OUT
="$GUESSOS" ;;
853 x86pc-
*-qnx6) OUT
="QNX6-i386" ;;
854 *-*-qnx6) OUT
="QNX6" ;;
855 x86-
*-android|i?
86-*-android) OUT
="android-x86" ;;
856 armv
[7-9]*-*-android) OUT
="android-armv7" ;;
857 *) OUT
=`echo $GUESSOS | awk -F- '{print $3}'`;;
860 # NB: This atalla support has been superceded by the ENGINE support
861 # That contains its own header and definitions anyway. Support can
862 # be enabled or disabled on any supported platform without external
863 # headers, eg. by adding the "hw-atalla" switch to ./config or
866 # See whether we can compile Atalla support
867 #if [ -f /usr/include/atasi.h ]
869 # options="$options -DATALLA"
872 if [ -n "$CONFIG_OPTIONS" ]; then
873 options
="$options $CONFIG_OPTIONS"
876 if expr "$options" : '.*no\-asm' > /dev
/null
; then :; else
877 sh
-c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
878 grep \\--noexecstack >/dev
/null
&& \
879 options
="$options -Wa,--noexecstack"
882 # gcc < 2.8 does not support -march=ultrasparc
883 if [ "$OUT" = solaris-sparcv9-gcc
-a $GCCVER -lt 28 ]
885 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
886 echo " Upgrade to gcc-2.8 or later."
888 OUT
=solaris-sparcv8-gcc
890 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
892 echo "WARNING! Falling down to 'linux-sparcv8'."
893 echo " Upgrade to gcc-2.8 or later."
899 i386-
*) options
="$options 386" ;;
902 for i
in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
904 if [ ! -d crypto
/$i ]
906 options
="$options no-$i"
910 # Discover Kerberos 5 (since it's still a prototype, we don't
911 # do any guesses yet, that's why this section is commented away.
912 #if [ -d /usr/kerberos ]; then
913 # krb5_dir=/usr/kerberos
914 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
915 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
916 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
917 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
918 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
919 # options="$options --with-krb5-flavor=MIT"
921 #elif [ -d /usr/heimdal ]; then
922 # krb5_dir=/usr/heimdal
923 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
924 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
925 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
926 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
927 # options="$options --with-krb5-flavor=Heimdal"
931 if [ -z "$OUT" ]; then
935 if [ ".$PERL" = .
] ; then
936 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
937 if [ -f "$i/perl5$EXE" ] ; then
944 if [ ".$PERL" = .
] ; then
945 for i
in .
`echo $PATH | sed 's/:/ /g'`; do
946 if [ -f "$i/perl$EXE" ] ; then
947 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
955 if [ ".$PERL" = .
] ; then
956 echo "You need Perl 5."
960 # run Configure to check to see if we need to specify the
961 # compiler for the platform ... in which case we add it on
962 # the end ... otherwise we leave it off
964 $PERL .
/Configure LIST |
grep "$OUT-$CC" > /dev
/null
965 if [ $?
= "0" ]; then
971 $PERL .
/Configure LIST |
grep "$OUT" > /dev
/null
972 if [ $?
= "0" ]; then
973 echo Configuring
for $OUT
975 if [ "$TEST" = "true" ]; then
976 echo $PERL .
/Configure
$OUT $options
978 $PERL .
/Configure
$OUT $options
981 echo "This system ($OUT) is not supported. See file INSTALL for details."