1 2018-08-12 Martin Mares <mj@ucw.cz>
5 * Added "-P" and "-PP" switches to lspci, which display the path
6 through bridges to each device.
8 * Fixed a couple of bugs in computation of bus topology. It was
9 previously used only for the tree display, but we re-use it for
12 * As usually, updated pci.ids to the current snapshot of the database.
14 2018-07-12 Martin Mares <mj@ucw.cz>
18 * Fixed compilation issues on Linux systems with MUSL libc.
20 2018-06-30 Martin Mares <mj@ucw.cz>
24 * BARs reported by the OS, but not set on the device itself are
25 reliably marked with "[virtual]".
27 * Library: Introduced a generic mechanism of string properties. This
28 avoids lots of special cases and makes ABI compatibility easier.
30 * On Linux systems with OpenFirmware, report corresponding device tree nodes
33 * VPD decoder knows several non-standard extensions.
35 * When PCIe link speed is less than the maximum supported by the
36 device, it is explicitly marked as "downgraded".
38 * Several new capabilities are not decoded yet, but at least their
41 * The Null capability is easily decoded.
43 * Formatting of several capabilities was cleaned up.
45 * The VGA16 bit in the bridge control register is now supported.
47 * Added a port to SylixOS. Thanks to YuJian Gong for contribution.
49 * Added a port to DOS/DJGPP. Thanks to Rudolf Marek for contribution.
51 * The order in which back-ends are probed was decoupled from the
52 internal back-end IDs. This helps, because new back-ends must have
53 their ID allocated at the end to keep the ABI, but they might need
56 * The fbsd-device back-end should work again.
58 * Fixed a couple of bugs. Most notably, DeviceName was not printed.
60 * As usually, updated pci.ids to the current snapshot of the database.
62 2017-11-17 Martin Mares <mj@ucw.cz>
66 * Improvements of the FreeBSD back-end: read-only access for non-root,
67 support DragonFly BSD, support extended config space.
69 * MN VPD keyword is decoded correctly.
71 * As usually, updated pci.ids to the current snapshot of the database.
73 2017-07-05 Martin Mares <mj@ucw.cz>
77 * Better decoding of AER capability.
79 * "Slot Implemented" flag is decoded for PCI/PCI-X to PCIe bridges.
81 * Minor fixes of decoding other capabilities.
83 * As usually, updated pci.ids to the current snapshot of the database.
85 2017-02-25 Martin Mares <mj@ucw.cz>
89 * Previous version broke compilation on systems, for which lib/types.h
90 did not provide a 64-bit integer type. It is provided everywhere now.
92 2017-02-15 Martin Mares <mj@ucw.cz>
96 * When lspci looks for Linux kernel modules, it uses the default
97 path to module directory provided by libkmod. Previously,
98 it tried to construct the path explicitly, which need not
101 * Improved formatting of memory and I/O ranges behind a bridge.
103 * PCIe link capabilities now display GEN4 speed (16GT/s).
105 * PCIe device capabilities now show bits related to atomic operations.
106 Thanks to Satanand Burla for a patch.
108 * As usually, updated pci.ids to the current snapshot of the database.
110 2016-10-03 Martin Mares <mj@ucw.cz>
114 * The L1 power management capability is now decoded more
115 thoroughly. Thanks to Rajat Jain for the patch.
117 * The table of configuration registers used by setpci
118 had a bug in the definition of SUBSYSTEM_VENDOR_ID.
120 2016-05-22 Martin Mares <mj@ucw.cz>
124 * Fixed symbol versioning of pci_init().
126 2016-05-19 Martin Mares <mj@ucw.cz>
130 * New capabilities decoded: Downstream Port Containment,
131 Precision Time Measurement. Thanks to Keith Busch and
134 * Domain numbers extended to 31 bits. This will be used by the
135 Linux kernel on some machines in near future.
137 * Enhanced allocation regions are now decoded on Linux.
139 * The NetBSD back-end supports PCIe extended configuration space.
141 * Updated pci.ids to the current snapshot of the database.
143 2016-01-03 Martin Mares <mj@ucw.cz>
147 * New capabilities decoded: Process Address Space, Page Request
148 Interface, Enhanced Allocation. Thanks to David Daney and
151 * DevCap SlotPowerLimit is now decoded for all components with
154 * Database mirror at SourceForge moved to GitHub.
156 * Updated pci.ids to the current snapshot of the database.
158 2015-09-14 Martin Mares <mj@ucw.cz>
162 * On Linux, we report NUMA nodes of devices.
164 * The sysfs back-end does not die on read errors
165 of optional attributes. Instead, a warning is produced.
167 * Fixed several minor bugs.
169 * Updated pci.ids to the current snapshot of the database.
171 2015-04-09 Martin Mares <mj@ucw.cz>
175 * Removed hacks for backward compatibility with Linux libc5,
176 which were breaking newer non-glibc Linux systems. Thanks
179 * Display VirtIO vendor-specific capability. Patch by Gerd
182 * Fixed memory leak in name cache.
184 * Updated pci.ids to the current snapshot of the database.
186 2014-11-10 Martin Mares <mj@ucw.cz>
189 (celebrating a one-year anniversary of the previous version :))
191 * Device names exported by BIOS are displayed on Linux.
193 * On Linux systems, HWDB is used to look up device names
194 when our ID database gives no match. (More precisely,
195 HWDB is consulted after local pci.ids, but before using
196 network to query online pci.ids.) Thanks to Tom Gundersen
197 for the initial patch.
199 * Added experimental back-end for OS X / Darwin. Thanks to
200 Richard Yao for providing it.
202 * Filters now support matching by device class. Original
203 patch by Matthew Wilcox, wrappers for ABI compatibility
206 * Interrupt Pin and Interrupt Line registers are displayed
207 for bridge devices, too.
209 * Several portability bugs have been fixed.
211 * Several typos have been fixed. Also, use of questionable
212 constructs in man pages has been reduced.
214 * PCIe link capabilities now include the ASPMOptComp bit.
216 * The "CRS Software Visibility" bit is now decoded properly.
218 * Updated pci.ids to the current snapshot of the database.
220 2013-11-10 Martin Mares <mj@ucw.cz>
224 * CardBus bridge capabilities are displayed.
226 * PCIe L1 PM substates are decoded.
228 * Various bugs were fixed in decoding of PCIe capabilities.
230 * The sysfs back-end does not spit out unnecessary warnings when
231 empty slots report only a partial device address. This actually
232 happens on IBM pSeries.
234 * Updated pci.ids to the today's snapshot of the database.
236 2013-04-19 Martin Mares <mj@ucw.cz>
240 * On newer Linux systems, we use libkmod to look up kernel modules
241 (modules.pcimap no longer exists). To facilitate this, libpci
242 is able to look up module aliases in sysfs.
244 * Various minor bug fixes.
246 * Updated pci.ids to the today's snapshot of the database.
248 2012-06-25 Martin Mares <mj@ucw.cz>
250 * Released as 3.1.10.
252 * Decoding of LTR/OBFF in PCIe capabilities.
254 * Various minor bug fixes.
256 * Updated pci.ids to the today's snapshot of the database.
258 2012-01-14 Martin Mares <mj@ucw.cz>
264 * Wherever we mention the PCI ID database, we now refer to
265 http://pci-ids.ucw.cz/ and the sf.net site is mentioned only
266 as a mirror. This includes update-pciids.
268 * Decode PCIe Gen 3 speeds and link status fields.
270 * Various minor bug fixes.
272 * Updated pci.ids to the today's snapshot of the database.
274 2011-10-02 Martin Mares <mj@ucw.cz>
278 * More capabilities: Transaction Processing Hints, Latency Tolerance
279 Reporting. Thanks to Jesse Barnes.
281 * Added BeOS and Haiku ports. Contributed by Francois Revol.
283 * pciutils.pc now uses Libs.private properly.
285 * When we format a name and it does not fit in the buffer, we truncate
286 it instead of returning "buffer too small" instead. This works on all
287 platforms with sane (i.e., C99-compatible) snprintf().
289 * Various minor bug fixes.
291 * Updated pci.ids to the today's snapshot of the database.
293 2010-01-31 Martin Mares <mj@ucw.cz>
297 * Minor improvements and bug fixes in decoding of the Virtual Channel
300 2010-01-24 Martin Mares <mj@ucw.cz>
304 * More capabilities decoded: Virtual Channel (except arbitration
305 tables), Root Complex Link, Vendor-Specific (header only), SATA HBA.
307 * All extended capabilities have their version displayed (-vv or more).
309 2010-01-19 Martin Mares <mj@ucw.cz>
313 * Updated pci.ids to the today's snapshot of the database.
315 * When scanning extended capabilities, properly mask the lowest 2 bits,
316 which are currently reserved. This avoids unaligned access errors on
317 broken hardware (see tests/broken-ecaps).
319 * Large bar sizes are displayed in human-readable format (with units).
320 Thanks to Matthew Wilcox.
322 * Physical slot information is displayed correctly for multi-function cards.
323 Fixed by Matthew Wilcox.
325 * Fixed a couple of typos everywhere.
327 * Library: Fixed bugs in freeing of capabilities.
329 * Windows back-end compiles again.
331 2009-08-14 Martin Mares <mj@ucw.cz>
334 (sorry that I have missed 22/7 and released it later :-))
336 * Updated pci.ids to the today's snapshot of the database.
338 * Fixed memory and file descriptor leak in the dump back-end.
340 * The SR-IOV capability decoder now prints the VF BAR's.
341 Patch by Chris Wright, cleaned up by me.
343 * On request of certain company's lawyers, we now include a copy
344 of the GPL with our package. It seems that the pciutils are getting
345 mature if the most important bug of the month was this one ;-)
347 2009-07-04 Martin Mares <mj@ucw.cz>
351 * Updated pci.ids to the current snapshot of the database.
353 * The VPD parser now reports unknown and vendor-defined items
354 properly. It also stops on any item in unknown format, avoiding long
355 output on bogus VPD data. Thanks to Ben Hutchings and Matthew Wilcox.
357 * The MSI-X table size now matches the spec. Thanks to Michael S.
360 * The Power Management capability now includes the soft reset bit.
363 * Decoding of the Advanced Features capability has been added.
366 * The whole package compiles on GNU/kFreeBSD again.
368 The following patches have been contributed by Matthew Wilcox:
370 * The procfs back-end is able to cope with /proc/bus/pci
371 containing names with domains, which occur on sparc64 and
372 possibly other architectures due to a kernel bug.
374 * The sysfs back-end no longer complains when a slot address
375 is missing, which happens with old versions of Linux fakephp.
377 * The Device Serial Number capability is printed in the right
380 * The MSI and MSI-X capabilities are printed in a prettier way.
382 * The tree output mode (`lspci -t') shows domain numbers only
383 at the root, which makes the output more compact.
385 * Updated documentation on the bus mapping mode (`lspci -M').
387 2009-02-01 Martin Mares <mj@ucw.cz>
391 * Fixed another silly bug in the command-line parser of setpci.
393 2009-01-30 Martin Mares <mj@ucw.cz>
397 * Updated pci.ids to the current snapshot of the database.
399 * The configure script now sets LC_ALL to avoid being fooled by
400 locale-dependent behavior of `tr'.
402 * The command-line parser of setpci did sometimes segfault on invalid
403 input. Thanks to Andreas Wiese for a fix.
405 2009-01-18 Martin Mares <mj@ucw.cz>
409 * Updated pci.ids to the current snapshot of the database.
411 * The Cygwin backend now works on Windows Vista. Thanks to Jonathan
414 * Fixed a bug in decoding of the SR-IOV capability. Patch by Yu Zhao.
416 * Details of some PCIe capabilities are displayed only with -vv.
418 * When a BAR is reported by the OS, but not by the device (i.e.,
419 it is marked as [virtual] in lspci), the [disabled] flag is
420 suppressed, because it does not make sense in such cases.
423 2008-12-13 Martin Mares <mj@ucw.cz>
425 * The source code of lspci has been split to multiple files, hopefully
426 making it easier to maintain.
428 * The library and lspci now know about physical slot names. So far,
429 they are provided by the sysfs back-end only. Thanks go to Alex Chiang.
431 * When a device has the VPD (Vital Product Data) capability and the
432 VPD data are supplied by the OS, they are decoded and printed in the
433 verbose mode. This currently works only on Linux with the sysfs
434 back-end. Thanks to Ben Hutchings of Solarflare for the patch.
436 * `setpci --version' now works properly.
438 * `setpci --dumpregs' prints a table of all known names of
439 registers and capabilities. This replaces the table of registers
440 in the setpci man page.
442 * The dry-run mode of setpci gives better feedback.
444 * The setpci utility is now able to address registers stored in PCI
445 capabilities (actually it allows a more general form of relative
448 * The library has gained functions for working with PCI capabilities.
450 * Address Translation Services capability is now decoded. Patch by
453 2008-11-09 Martin Mares <mj@ucw.cz>
457 * `lspci -k' now displays the subsystem ID, too. This makes `-k'
458 show everything needed to identify the device and the available
459 drivers, which was called for by many users.
461 * Fixed spelling of MSI. Patch by Matthew Wilcox.
463 * Better support for cross-compilation. Thanks to Alon Bar-Lev
466 * Fixed printing of the AER capability. Patch by Max Asbock.
468 * HT 1.02 capabilities are decoded as HT 1.03. Suggested by
469 Carl-Daniel Hailfinger.
471 * Fixed Cygwin build. Thanks to Steve Elliott for reporting the bug.
473 * Updated pci.ids to the current snapshot of the database.
475 2008-09-19 Martin Mares <mj@ucw.cz>
479 * Fixed a minor bug in the configure script, which caused warnings
480 about redefinition of symbols during compilation.
482 2008-09-11 Martin Mares <mj@ucw.cz>
486 * Updated pci.ids to the most recent snapshot.
488 * Added a Cygwin port. Patch by Christopher Voltz, ported to the
489 current tree by Martin Mares.
491 * Worked around compatibility problems with various default settings
492 of wget (we have to set --no-timestamping explicitly). Thanks to Ville
493 Skytta for pointing that out.
495 * Fixed printing of MSI capabilities. Thanks to Matthew Wilcox for
498 * Added decoding of several PCI-X capabilities: device/link/slot 2,
499 Advanced Error Reporting, Access Control Services, Alternative Routing-ID,
500 Single Root I/O Virtualization. Thanks to Yu Zhao for patches.
502 * Fixed bug in filters which caused them to refuse vendor/device ID 0xffff.
504 * README: The linux-pci mailing list has moved to linux-pci@vger.kernel.org.
506 * Fixed several build problems: builds without PCI_USE_DNS on Linux
507 and with PCI_USE_DNS on Solaris and *BSD. Static library mode also
508 compiles again on old versions of GCC.
510 2008-04-10 Martin Mares <mj@ucw.cz>
514 * Updated API and ABI version.
516 2008-02-20 Martin Mares <mj@ucw.cz>
518 * Released as 2.99.1-alpha2.
520 * Changed the default domain for the DNS resolver.
522 2008-02-18 Martin Mares <mj@ucw.cz>
524 * Released as 2.99.1-alpha1.
526 * The makefile system has been reworked. All configuration settings
527 are now passed to the configure script in environment variables,
528 allowing for easy tweaking in the top-level Makefile. All control
529 knobs are now described in the README.
531 * The libpci can be built as a shared library with properly restricted
532 symbol exports. Use `make SHARED=yes' to enable that or `make SHARED=local'
533 for a local testing build (with hardwired paths to the library, so that
534 it does not need installation).
536 * The example program has been moved from lib/example.c to the top-level
537 directory, because it should be built exactly as the other utilities
538 are. It has been also improved slightly to educate better.
540 * The i386-ports method is enabled on Linux/x86_64 as well.
542 2008-02-13 Martin Mares <mj@ucw.cz>
544 * Released as 2.2.10-net2.
546 * Support for resolving of PCI ID's using DNS together with a local
547 cache of resolved entries has been added. See the `-q' and `-Q' options
550 * The library now has a generic system of settable parameters, which
551 also include settings of the DNS resolver and cache. An `-O' option
552 has been added to lspci and setpci to allow setting of these options.
554 * Configuration of the access methods are now specified by the new
555 parameter system, replacing the pci_access->method_params array.
557 * Access methods now also have sensible names and help texts and it
558 is possible to look up method ID by a name.
560 * An `-A' switch has been added to both lspci and setpci, allowing to
561 select an arbitrary access method. The `-P' switch (configure proc
562 backend) has been removed as it is no longer needed and I do not know
565 * Several source files have been split for better maintainability
566 (most notably the resolving of ID's).
568 * Man pages and help texts have been updated. A new man page `pcilib(7)'
569 has been added and description of library options has been moved there.
571 * When an unknown device ID is encountered, we print `Device <id>'
572 instead of `Unknown device <id>'. It uses less space and it also
573 should reduce the number of inexperienced users complaining that
574 the device is not supported by the OS. To lookup up OS drivers,
577 * PCI_LIB_VERSION has been bumped to 0x020299.
579 * Makefile: stripping of the binaries during installation can be
580 overridden by the STRIP variable.
582 * lib/types.h: We use the integer types from <stdint.h> if the
583 compiler claims C99 support.
585 2008-02-11 Martin Mares <mj@ucw.cz>
587 * Released as 2.2.10.
589 * lspci.c, setpci.c: Cleaned up the list of options.
591 * lib/names.c: Fix displaying of errors reported by zlib.
592 Previously, the buffer containing the error message had
593 been deallocated by gzclose() before the message was printed.
595 2008-01-07 Martin Mares <mj@ucw.cz>
597 * update-pciids.sh: Added quiet mode (-q). Clean up uncompressed
598 files left by previous versions of the pciutils. Patch by Mike
601 * update-pciids.man: Mention the -q switch.
603 2007-11-29 Martin Mares <mj@ucw.cz>
605 * lib/dump.c: Squashed compiler warnings about code with
606 no effect (there really were surplus *'s).
608 2007-11-06 Martin Mares <mj@ucw.cz>
612 * lspci.c: Added a new switch `-k' which requests printing
613 of information on kernel drivers attached to each device
614 and on kernel modules reporting the ability to handle the
615 device. So far, this is supported only on Linux with the
616 sysfs back-end, so it is implemented internally in the lspci
617 instead of the libpci. Thanks to Anicka <anicka@anicka.net>
620 2007-10-19 Martin Mares <mj@ucw.cz>
622 * Makefile, lib/Makefile: Moved -lz from LDFLAGS to LDLIBS.
623 Also added an explicit pattern rule for linking to make sure
624 that LDLIBS is used on all platforms. Thanks to Dan Nicholson
627 2007-10-19 Martin Mares <mj@ucw.cz>
631 * pci.ids: Revised class codes to match Conventional PCI 3.0 specs.
632 Added a couple of new ones, renumbered `ADMA continuous operation'
633 prog-if to 0x30 (even the old SATA Class Code ECN doesn't mention
634 0x40) and renumbered the satellite communication controllers.
636 * lib/header.h: Include `PCI hot-plug' and `Secure device'
637 capabilities from PCI 3.0 specs. Also added `SATA HBA' and
638 `Advanced features' caps from various ECN's.
640 * lspci.c: All known capabilities have at least their name displayed
641 now. When we are unable to decode them completely, we signalize it
644 * lspci.man: Document `<?>' and also mention that extended config
645 space is currently available only with the linux_sysfs back-end.
647 * lspci.c: Decode the Debug port capability (per EHCI 0.96 spec).
649 * lspci.c: Big code cleanup: re-arranged functions in the code,
650 renamed everything related to capabilities to cap_* and
651 all options except verbose to opt_*.
653 2007-10-14 Martin Mares <mj@ucw.cz>
655 * lib/[fno]bsd-*: Removed extraneous braces.
657 2007-10-12 Martin Mares <mj@ucw.cz>
659 * Capability loop detection introduced 2.2.7 did not work
660 properly with extended capabilities. Fixed.
662 2007-10-05 Martin Mares <mj@ucw.cz>
666 * lspci.c (show_caps, show_ext_caps): Detect and report loops in
669 * lspci.c, lib/header.h: Finished decoding of the PCI Express
670 capability. The extended capabilities remain undecoded for now,
671 but at least the list of them has been updated to reflect the
672 current PCI Express 2.0 spec.
674 * lspci.c, lib/header.h: Decode new bits of traditional registers
675 as defined by PCIE / PCI-X. This includes discard timers in the bridge
676 control register and INTx enable/status in device control/status
679 * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed
682 2007-09-12 Hasso Tepper <hasso@estpak.ee>
684 * Extended the fbsd-device backend to run on Dragonfly BSD.
686 * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>.
688 2007-09-03 Martin Mares <mj@ucw.cz>
690 * Resurrected the Windows port, including cross-compilation by MinGW.
691 Patch by Samuel Bronson <naesten@gmail.com>.
693 2007-08-31 Martin Mares <mj@ucw.cz>
695 * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow
698 2007-08-27 Martin Mares <mj@ucw.cz>
700 * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode
701 instead of "r". This is needed on DOS systems, where this function
702 somewhat illogically uses the binary flag for the compressed file
703 instead of the decompressed stream inside, where binariness really
706 2007-08-14 Martin Mares <mj@ucw.cz>
708 * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability,
709 based on a patch by Jason Gunthorpe.
711 * tests/cap-MSI-mapping: Added a test case. I plan to add test cases
712 (which are dumps of config space) for all new features.
714 2007-06-20 Martin Mares <mj@ucw.cz>
718 * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson
721 * Makefile, lib/Makefile: Generate and install pkg-config file
722 for libpci. Again by Dan Nicholson.
724 2007-06-20 Thomas Schwinge <tschwinge@gnu.org>
726 * lib/i386-io-hurd.h: Rewritten for new Hurd kernels.
728 2007-05-04 Martin Mares <mj@ucw.cz>
732 * pci.ids: Updated to the current snapshot of the database.
734 2007-02-14 Martin Mares <mj@ucw.cz>
736 * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type.
737 Patch by Mark Glines.
739 2007-02-09 Martin Mares <mj@ucw.cz>
741 * pci.ids: Updated to the current snapshot of the database.
743 2007-02-06 Martin Mares <mj@ucw.cz>
745 * Replaced bzero() by memset() everywhere, it's better to lose a tiny
746 bit of readability than maintain hacks to make it work on various systems.
748 * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]'
749 instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise.
751 * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise
754 2007-02-04 Martin Mares <mj@ucw.cz>
756 * lspci.c: alloca() needs <alloca.h>.
758 2006-09-17 Martin Mares <mj@ucw.cz>
760 * lib/dump.c: Fixed a couple of bugs in the dump backend which caused
761 devices with domains or with extended config space to be read incorrectly.
762 Also, dumps with partial lines are allowed now.
764 2006-09-10 Martin Mares <mj@ucw.cz>
766 * pci.ids: Updated to the current database snapshot.
768 * lspci.c (scan_device): If an error occurs when reading the standard config
769 header of a device, report it and ignore the device and return with exit
772 2006-09-09 Martin Mares <mj@ucw.cz>
776 * maint/release: Remind the maintainer about the current PCI_LIB_VERSION.
778 * lib/pci.h: Updated PCI_LIB_VERSION.
780 * lspci.c (show_machine): In the `-m' mode, do proper shell escaping
781 if the fields printed contain quotes or backslashes.
783 * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse
784 of the `Device' tag for two different purposes.
786 * Makefile: Moved all system-dependent decisions to lib/configure,
787 since config.mk is included in the top-level Makefile anyway.
789 * lib/configure: When configuring for Linux, ignore the kernel version
790 and always build all access methods.
792 * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers
793 at many non-interesting places with gcc 3.4.
795 * Whitespace cleanup of all source files.
797 * The pci.ids file can be stored compressed if zlib is available.
798 Added transparent decompression to lib/names.c, modified update-pciids.sh
799 to keep the file compressed if applicable, updated Makefiles.
800 Based on a patch by Matthew Wilcox, but all the bugs are mine.
802 * Makefile, README: Allow installation to be done to a different directory
803 from the one we will eventually be placed in by setting DESTDIR.
804 Patch by Matthew Wilcox.
806 * Added .gitignore files.
808 * Makefile (clean): Clean *.orig, too.
810 * Cleaned up usage of `char' and `byte'.
812 * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01.
814 * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently
815 defined in the pci.ids file.
817 2006-08-01 Martin Mares <mj@ucw.cz>
819 * lib/i386-io-hurd.h: Fixed a silly typo.
821 2006-07-30 Martin Mares <mj@ucw.cz>
823 * lib/Makefile: Added a missing rule for obsd-device.o.
825 * lspci.c, lib/header.h: Added support for MSI per-vector masking.
826 Contributed by Petr Vandrovec.
828 * lspci.c, lib/header.h: Added support for the `bridge subsystem ID'
829 capability. Contributed by Petr Vandrovec.
831 * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable
832 memory windows. Fix by Petr Vandrovec.
834 * maint/release.pm: Exclude .git directory from releases.
836 * lib/i386-ports.c, lib/i386-io-*: Report failures during port access
837 initialization by a->warn() instead of calling printf() or perror()
840 * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of
841 the port access state to generic code.
843 * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately.
844 Contributed by Thomas Schwinge and Samuel Thibault.
846 * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module.
848 * lib/header.h: Whitespace cleanups.
850 * lib/i386-io-windows.h: Fixed indentation and spelling.
852 * README.Windows: Mention that WinIO.dll is needed and where to get it.
854 2006-06-27 Martin Mares <mj@ucw.cz>
856 * lib/Makefile, Makefile: Added rules for building and cleaning the example.
858 * lib/example.c: Show how to use PCI_FILL_CLASS and used another register
859 for demonstrating the config space accesses. The example is still very
862 * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS.
864 * lib/sysfs.c: Fetch device ID and class from sysfs, because they can
865 be modified by kernel fixups.
867 * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch.
869 2006-06-03 Martin Mares <mj@ucw.cz>
871 * lspci.c: Introduced the -nn switch. Thanks to David N. Welton
874 * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and
875 cleaned up the name selection code.
877 * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given,
878 pci_access->numeric_ids is ignored.
880 * lib/names.c (pci_lookup_name): When class is identified and
881 subclass isn't, display class name and subclass number.
883 2006-05-31 Martin Mares <mj@ucw.cz>
885 * setpci.c (main): Don't crash when an invalid width is specified.
887 * lspci.c, setpci.c, common.c: die() now uses the right program
888 name when printing an error message.
890 2006-05-19 Martin Mares <mj@ucw.cz>
892 * README: Mention the public GIT tree.
894 * README: Updated the list of ports.
896 2006-05-10 Martin Mares <mj@ucw.cz>
898 * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD.
899 Thanks to Petr Salinger for the patch.
901 2006-05-05 Martin Mares <mj@ucw.cz>
905 * lspci.c (scan_device): The -D switch didn't work as intended
908 2006-05-05 Martin Mares <mj@ucw.cz>
912 * pci.ids: Updated to the current database snapshot.
914 * lib/obsd-device.c (and other files in lib/*): Added OpenBSD
915 interface by Matthieu Herrb <matthieu.herrb@laas.fr>, based on
916 the existing FreeBSD interface.
918 * Moved pciutils to a GIT repository, which now contains merged
919 history from both CVS and Arch. Good bye, TLA!
921 2006-03-21 Martin Mares <mj@ucw.cz>
923 * lspci.c (show_slot_name): Avoid the previous changes in default
924 display of domain name when in machine-readable mode. However, `-D'
925 forces domain display even there.
927 * lspci.man: Added a warning on -m being the only format, which is
928 guaranteed to be stable between lspci versions.
930 2006-03-13 Martin Mares <mj@ucw.cz>
932 * lspci.man: Documented the -D switch.
934 * lspci.c (show_slot_name, scan_device): If there are multiple PCI
935 domains or if the `-D' switch is used, show the domain number for
938 * lspci.c (show_verbose): Report cache line size in bytes.
940 * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox.
942 2006-01-04 Martin Mares <mj@ucw.cz>
944 * lspci.c (show_express_link): Fixed decoding of link status register.
945 Thanks to Roland Dreier for his report.
947 2005-12-12 Martin Mares <mj@ucw.cz>
949 * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow
950 at least read-only access. Patch by Pavel Celeda <celeda@liberouter.org>.
952 * Makefile: Corrected library path on NetBSD.
954 2005-11-26 Martin Mares <mj@ucw.cz>
958 * lspci.c (show_machine): Subsystem vendors were printed incorrectly
959 in machine-readable modes. Thanks to Pavel Celeda for a bug report.
961 2005-10-11 Martin Mares <mj@ucw.cz>
963 * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it.
965 2005-09-21 Martin Mares <mj@ucw.cz>
969 * pci.ids: Updated copyright header.
971 * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported
972 64-bit addresses, they are now always supported.
974 * lspci.c (show_bases): Corrected printing of 64-bit addresses
977 * lib/configure: Enable 64-bit addresses on all Linux systems.
979 * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they
982 2005-09-11 Martin Mares <mj@ucw.cz>
984 * Released as 2.1.99-test11.
986 * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls.
988 2005-09-10 Martin Mares <mj@ucw.cz>
990 * Released as 2.1.99-test10.
992 * pci.ids: Synchronized with the current database snapshot.
994 * update-pciids.sh: Changed the default URL for downloading pci.ids
995 to http://pciids.sourceforge.net/v2.2/pci.ids.
997 * lib/pci.h (PCI_LIB_VERSION): Added version identifier.
999 * lib/names.c: Rewritten the name database module almost from scratch.
1000 Everything is much cleaner and there are hopefully no more memory leaks;
1001 pci_lookup_name() now uses varargs in a backward compatible fashion.
1002 Introduced PCI_LOOKUP_NO_NUMBERS.
1004 The new code supports subsystem entries not tied to a specific device.
1005 I had to extend the format of pci.ids in order to support it, so I have
1006 extended the idea of the "C" (class) blocks and introduced "S" blocks
1007 for subsystems. To avoid doing more incompatible changes in the future,
1008 the parser skips unknown single-letter blocks without reporting errors.
1010 2005-08-23 Martin Mares <mj@ucw.cz>
1012 * Released as 2.1.99-test9.
1014 * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent
1015 gcc versions when optimizing anyway.
1017 * Made the path to pci.ids customizable and independent on the SHAREDIR.
1018 Just override IDSDIR in the top-level Makefile.
1020 * pci.ids: Synchronized with the current database snapshot.
1022 * lspci.man, setpci.man: Improved the man pages. Documented all access
1023 methods and which operations are privileged.
1025 * lspci.c: Another rewrite of config register caching, now also including
1026 lots of internal checks. It should be now perfectly able to cope with
1027 portions of the configuration space being inaccessible, for example
1028 due to insufficient access rights.
1030 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X
1031 capabilities. Includes partial support for PCI-X 2.0 (probably incomplete
1032 as I haven't seen the spec).
1034 * lspci.c: Quell warnings about unused parameters.
1036 * lspci.c: Removed C++ comments.
1038 * lib/header.h: Merged definitions of extended capabilities and some new
1039 PCI-X capability bits from linux-2.6.11/include/pci.h.
1041 * lspci.c (show_caps): Try to scan extended capabilities only if the
1042 device has either PCI-X or PCI Express capability in its normal capability
1045 * lib/dump.c (dump_init): Reading of dumps works again. The dump reader
1046 now also remembers how much data it has read and refuses attempts to
1047 access more than that.
1049 * setpci.man, lspci.c, README: prefer spelling "buses" over "busses".
1051 * lspci.c: If alloca() is not available, use xmalloc(), not malloc().
1053 * lib/configure: Added x86_64 on Linux.
1055 2005-08-22 Martin Mares <mj@ucw.cz>
1057 * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters.
1058 Thanks to Matthew Wilcox for bug report.
1060 * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places).
1061 Thanks to Krzysztof Oledzki for pointing that out.
1063 2004-08-19 Martin Mares <mj@ucw.cz>
1065 * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism,
1066 because pciutils by default install to /usr/sbin. Update.
1068 2004-08-13 Martin Mares <mj@ucw.cz>
1070 * Released as 2.1.99-test8.
1072 * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are
1073 no longer exported to the outside world.
1075 * README.Windows: Updated.
1077 * maint/release: Substitute version number in win32/config.h.
1079 * win32/config.h: Added.
1081 * lib/sysdep.h (bzero, strcasecmp): are macros on Windows.
1083 * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU
1084 C library for use on systems where the default libraries lack
1085 proper getopt. Currently used by the Windows port.
1087 * lib/sysdep.h, lib/types.h: Updates of the Windows port from
1090 * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define
1091 its own u8, u16, u32, byte and word types and uses what the user
1092 has supplied instead. With this change, all namespace clashes should
1095 * Makefile, lib/Makefile: Updated dependencies.
1097 * pciutils.h: Include lib/sysdep.h and move NONRET et al. there.
1099 * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because
1100 it is included unconditionally in lib/types.h.
1102 * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h,
1103 which is also used by the utilities. Also moved type declarations
1104 from lib/pci.h to lib/types.h.
1106 * All files: Prepend a "PCI_" prefix in front of all configuration
1107 defines to avoid namespace clashes. CAVEAT: If there is any libpci
1108 application using the (undocumented) defines, it has to be updated.
1110 * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing
1111 headers with the kernel a couple of years ago.
1113 * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6.
1115 * lspci.c (show_rom): Use the same logic for printing disabled
1116 or unassigned ROM's as we do in show_bases() for the other BAR's.
1118 * lib/generic.c (pci_generic_fill_info): Better reaction to
1119 invalid 64-bit addresses. Also d->hdrtype should not include
1120 bit 7, which caused mysterious errors on multi-function devices.
1122 * lib/generic.c (pci_generic_fill_info): Fill in base addresses
1123 even if the regions are known to be disabled. It is the client's
1124 job to interpret them. (And it is not a trivial job if you want
1125 to do it correctly, since you need to check I/O and memory enables
1126 on all upstream bridges, too.) However, it could be interesting to
1127 introduce functions for interpreting the addresses and even for
1128 mapping the regions and doing I/O on them.
1130 2004-07-30 Martin Mares <mj@ucw.cz>
1132 * lspci.c: HyperTransport improvements from Maciej.
1134 2004-07-11 Martin Mares <mj@ucw.cz>
1136 * lib/sysfs.c (sysfs_get_resources): Arguments now correspond
1137 to the format string. [Patch by Bill Nottingham]
1139 2004-07-05 Martin Mares <mj@ucw.cz>
1141 * Released as 2.1.99-test7.
1143 * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but
1144 ended up with rewriting the fetching mechanism to be fully dynamic,
1145 but avoid reading config space registers not explicitly requested.
1147 2004-06-29 Matthew Wilcox <willy@debian.org>
1149 * lspci.c: More work on PCI Express dumping.
1151 * lib/header.h: Updated PCI Express capability definitions.
1153 * lib/proc.c (proc_read): Removed bogus warning.
1155 * common.c (xrealloc): Introduced.
1157 * lspci.man: Added -xxxx.
1159 2004-06-27 Martin Mares <mj@ucw.cz>
1161 * Released as 2.1.99-test6.
1163 * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap.
1164 Patch by Roland Dreier <roland@topspin.com>, cleaned up by me.
1166 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch()
1169 * lib/header.h: Added PCI Express extended capabilities. Again by Matthew.
1171 * lspci.c (show_express): Added dumping of PCI Express cap.
1172 Patch by Matthew Wilcox.
1174 * lib/header.h: Added a list of PCI 3.0 capabilities and also details
1175 on PCI Express caps. Patch by Matthew Wilcox <willy@debian.org>.
1177 * lspci.c (check_root): Gone. No explicit checks for root are needed,
1178 report correct errors reported by the libpci instead.
1180 * lspci.c: Added dumping of the extended config space on "-xxxx".
1181 Better caching of config registers.
1183 * setpci.c (main): Allow access to whole 4096 bytes of the config space.
1185 * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads,
1186 just return the appropriate error code.
1188 * lib: Added support for extended (4096-byte) configuration space,
1189 currently implemented only in Linux proc and sysfs access methods
1190 and of course in the dump reader.
1192 2004-05-29 Martin Mares <mj@ucw.cz>
1194 * Released as 2.1.99-test5.
1196 * lib/pci.h: Windows don't have the standard u_int* types.
1198 * lib/internal.h: <sys/param.h> required on Windows for endianity
1201 * lib/i386-ports.c: Connected i386-io-windows.h.
1203 * lspci.c (check_root): geteuid() is not available on Windows.
1205 * lib/i386-io-windows.h: Added Windows port contributed by Alexander
1206 Stock <stock.alexander@gmx.de>.
1208 * lib/configure: Hopefully fixed SunOS port broken by various
1209 changes to the configure script.
1211 * Makefile, lib/configure: Cross-compilation support, patch by Maciej.
1213 2004-05-28 Martin Mares <mj@ucw.cz>
1215 * Released as 2.1.99-test4.
1217 * lspci.c (show_verbose): Header type 1 is probably legal for all
1218 types of bridges, not only for PCI-to-PCI bridges.
1220 * lspci.c (format_agp_rate): Write "x16", not "x@".
1221 (show_agp): rate[] could overflow.
1222 Bugs reported by Jakub Bogusz <qboosh@pld-linux.org>.
1224 * lspci.c (show_ht_*): Show HyperTransport capability with all its
1225 details. Once again code by Maciej simplified (i.e., possibly broken)
1228 * lib/header.h: Added declarations of HyperTransport capability.
1229 Again thanks to Maciej.
1231 * lspci.c: Decode all bits of the secondary status word in type 1 headers.
1232 Thanks to Maciej W. Rozycki <macro@ds2.pg.gda.pl> for the patch.
1234 2003-12-27 Martin Mares <mj@ucw.cz>
1236 * Released as 2.1.99-test3.
1238 * lspci.man, setpci.man: Document domains and correct spelling.
1240 * lib/dump.c (dump_init): Added ability to read domain numbers.
1242 * lspci.c: Devices in domains different from 0 have their slot number
1243 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains
1246 * lib/filter.c: Slot filters understand domains.
1248 * lib/generic.c: Mention the domain in slot numbers in all error messages.
1250 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong.
1252 * lib/access.c (pci_get_dev): Added support for domains.
1254 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config
1255 registers (or to be precise, leave it for the generic parts of the pcilib
1256 to do so) instead of reading them from the sysfs. It's faster this way.
1258 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal
1259 variable. Better read it from the config registers (it's cached anyway).
1261 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype.
1262 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it.
1263 Saves lots of unnecessary file accesses.
1265 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter
1266 is not supported by all C libraries.
1268 * Makefile: Always enter the lib directory (remember that we don't have
1269 full dependecies for the library in the top-level Makefile; hmmm, another
1270 thing to rewrite some day).
1272 * lib/sysfs.c: Added Linux sysfs access method based on the patch
1273 written by Matthew Wilcox <willy@fc.hp.com>.
1275 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc".
1277 * lib/pread.h: The hacks to support pread on various versions
1278 of Linux libc moved there.
1280 * lib/proc.c (proc_setup): The return value of snprintf() varies
1281 between glibc versions, so we need to check both for a negative
1282 values and for too large values.
1284 * Removed last few references to the "Linux PCI Utilities", the
1285 package is pretty cross-platform now :)
1287 2003-12-27 Martin Mares <mj@ucw.cz>
1289 * Released as 2.1.99-test2.
1291 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the
1292 release scripts insert the current version. "make release" is gone.
1294 * maint/release, maint/release.pm: Added a new system of scripts for
1295 making releases including inter-version diffs etc.
1297 * Makefile: Cleaned up.
1299 * lib/fbsd-device.c: I patched another copy of this file by mistake,
1300 this time the version checks should be right.
1302 2003-12-27 Martin Mares <mj@ucw.cz>
1304 * Released as 2.1.99-test1.
1306 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h:
1307 Remove shadows of the syscall access method which was never
1310 * update-pciids.sh: Try to preserve permissions of the old file
1311 if chmod supports --reference. Should close Debian Bug #223740.
1313 * lib/proc.c (proc_setup): Increased path name length limit to 1024.
1314 Thanks for Redhat and Mandrake for inspiration.
1316 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses.
1317 Grabbed from Redhat (Fedora) patches.
1319 2003-12-27 Martin Mares <mj@ucw.cz>
1321 Merged bug fixes from Debian patches:
1323 * lspci.c (show_verbose): "Cache Line Size" should be capitalized.
1325 * lspci.c (show_pcix_nobridge): Added a missing newline.
1327 * lib/proc.c (proc_scan): When reading the header type, don't
1328 forget to clear the topmost bit indicating that the device has
1331 2003-12-27 Martin Mares <mj@ucw.cz>
1333 Updated the FreeBSD port. Thanks to Samy Al Bahra <samy@kerneled.com>
1336 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
1337 * lib/fbsd-device.c: Select the right set of system includes according
1338 to __FreeBSD_version.
1340 2003-12-27 Martin Mares <mj@ucw.cz>
1342 Merged support for Solaris on i386 by Bill Moore <billm@eng.sun.com>
1345 * lib/configure: Recognize SunOS.
1346 * lib/internal.h: Learn how to recognize byte order on SunOS.
1347 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
1348 * lib/i386-io-linux.h: Linux specific part.
1349 * lib/i386-io-hurd.h: GNU/Hurd specific part.
1350 * lib/i386-io-sunos.h: SunOS specific part.
1352 2003-12-26 Martin Mares <mj@ucw.cz>
1354 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.
1356 * lib/pci.h: Types declared in <sys/types.h> should be usable on all
1357 platforms we currently support, so kill the forest of #ifdef's and
1358 use them in all cases.
1360 * lib/pci.h: Use ULONG_MASK to decide whether we should use long
1361 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
1362 Define format strings for addresses, port numbers and IRQ numbers
1365 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.
1367 2003-12-26 Marco Gerards <metgerards@student.han.nl>
1369 Added support for the GNU Hurd (cleaned up by Martin Mares):
1371 * lib/configure [GNU]: Use the i386 ports for configuration access.
1372 * lib/i386-ports.c: Don't call iopl() on the Hurd.
1373 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
1376 2003-12-26 Martin Mares <mj@ucw.cz>
1378 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
1379 config_fetch() to ensure that the registers have been read. Thanks to
1380 Bill Wood <bill.wood@hp.com> for the patch.
1382 * lspci.c: Ensure that failure of config_fetch() is handled correctly
1385 * lspci.man: There was one more explicit reference to /usr/share/pci.ids.
1386 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <macro@ds2.pg.gda.pl>.
1388 * setpci.c (main): Better error messages.
1390 * setpci.c (ex_op): The demo mode should disable only writing, not reading.
1392 * setpci.man: The documentation was inconsistent on what should -D do.
1393 Document the new behaviour.
1395 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
1396 the GCC specific __attribute__((noreturn)) and killed the hack with
1397 redefining __attribute__ on non-GCC compilers.
1399 * Makefile: Added missing dependencies. Parallel builds work now.
1400 Problem reported by Andreas Haumer <andreas@xss.co.at>, but I chose
1403 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
1404 command every time $(MANDIR) is referenced.
1406 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned
1407 a `-f' switch. Reported by Steve Finney <Steve.Finney@SpirentCom.COM>.
1409 * lib/generic.c: Removed memory leak in pci_generic_bus_scan().
1410 Reported by Gary Parnes <gary_parnes@terago.com>.
1412 * Replaced obsolete syntax of __attribute__((unused)) in the middle of
1413 parameter declarations (which is no longer supported by GCC 3.1) by the
1414 current syntax (attribute at the end). Thanks to pixel@mandrakesoft.com
1415 for reporting this problem.
1417 * Removed CVS $Id$ tags from all files.
1419 * Makefile: Added some more warnings.
1421 * setpci.c: Cleaned up mask/value code.
1423 2003-12-08 Thayne Harbaugh <tharbaugh@lnxi.com>
1425 * setpci.c: Individual bits to be set can be specified as <value>:<mask>.
1427 2003-11-29 Martin Mares <mj@ucw.cz>
1429 * Imported the pciutils sources to my Arch repository. Good-bye, CVS.
1431 2003-01-04 Martin Mares <mj@ucw.cz>
1433 * Released as 2.1.11.
1435 * Makefile: Changed configuration of installation directories --
1436 all paths are now set at the top of the Makefile instead of being
1437 scattered between the installation rules. The default installation
1438 now goes always to /usr/local regardless of the OS as most distributions
1439 already contain some version of pciutils and we don't want custom
1440 installations to interfere with the default ones.
1442 * Makefile: Removed a couple of ancient install hacks: we no longer
1443 try to avoid overwriting a newer pci.ids file (users are now expected
1444 to use update-ids) and we don't try to remove /etc/pci.ids (a long time
1445 has passed since the last version which used it).
1447 * Makefile: Paths to pci.ids in man pages automatically get the right path.
1449 * Added the update-ids utility.
1451 * lib: Removed partially implemented "syscall" access method which will
1452 probably never be needed.
1454 2002-12-27 Martin Mares <mj@ucw.cz>
1456 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.
1458 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
1459 discontiguous numbering of functions. This is already present in the Linux
1460 kernel for several years, but I forgot to update pciutils as well.
1462 2002-12-26 Martin Mares <mj@ucw.cz>
1464 * lib/header.h, lspci.c: Dump AGP3 flags and speeds.
1466 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
1467 there is no reason to prefer the kernel version.
1469 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype.
1471 * Added preliminary version of NetBSD support by Quentin Garnier
1472 <netbsd@quatriemek.com>.
1474 2002-04-06 Martin Mares <mj@ucw.cz>
1476 * lspci.c: Mention "-xxx" in the help.
1478 2002-03-30 Martin Mares <mj@ucw.cz>
1480 * Released as 2.1.10.
1482 * Removed pci.ids from the CVS as they are now maintained separately.
1483 They are still included in the tarball, but if you are building pciutils
1484 from CVS sources or you want to get a newer ID file than the one distributed,
1485 just use "make update-ids" to download the most recent snapshot from
1488 * Makefile, README: Updated accordingly.
1490 * Makefile: Added a couple of maintenance targets.
1492 * maint/*: Maintainer's utilities now reside here (present only in CVS,
1493 not in the tarball).
1495 * lib/names.c (parse_name_list): End-of-line comments are no longer
1496 supported. Hashes are now perfectly valid in all names and they start
1497 a comment only at the start of the line.
1499 2002-03-26 Martin Mares <mj@ucw.cz>
1501 * README: Rewritten.
1503 * Makefile: When the currently installed pci.ids file is newer than
1504 the version to be installed, don't overwrite it. Suggested by
1505 Jean Delvare <khali@linux-fr.org>.
1507 2002-03-24 Martin Mares <mj@ucw.cz>
1509 * lspci.c (show_pcix_bridge): Added PCI-X capability display.
1510 Contributed by Jeff Garzik <jgarzik@mandrakesoft.com>.
1512 * lib/header.h: Added PCI-X stuff. Again by Jeff.
1514 * Makefile (CFLAGS): -Werror is gone.
1516 * lspci.c (format_agp_rate): Fixed AGP rate reporting.
1518 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
1521 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
1522 or device hexadecimally, don't confuse it with chip vendor/device ID.
1523 First reported by Marc Boucher <marc@mbsi.ca>.
1525 2001-11-04 Martin Mares <mj@ucw.cz>
1527 * Released as 2.1.9.
1529 * pci.ids: Synced with the PCI ID Repository at SourceForge
1530 (http://pciids.sourceforge.net/).
1532 2000-08-25 Martin Mares <mj@albireo.ucw.cz>
1534 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7.
1536 2000-06-13 Martin Mares <mj@albireo.ucw.cz>
1538 * Makefile (uninstall): Fixed.
1540 * pci.ids: ID updates.
1542 2000-05-20 Martin Mares <mj@albireo.ucw.cz>
1544 * Released as 2.1.8.
1546 * pci.ids: ID updates.
1548 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.
1550 2000-05-04 Martin Mares <mj@albireo.ucw.cz>
1552 * lspci.c (show_verbose): If the header type doesn't match device
1553 class, just print a warning and still use the header type, assuming
1556 2000-05-01 Martin Mares <mj@albireo.ucw.cz>
1558 * lspci.c (show_pm): Updated according to PCI PM specs 1.1.
1560 * pci.ids: Updated Contemporary Control ARCnet card entries.
1562 * pci.ids: Synchronized class list with latest PCI SIG documents.
1564 2000-04-29 Martin Mares <mj@albireo.ucw.cz>
1566 * lib/names.c (pci_lookup_name): Fixed the cheat.
1568 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations.
1570 * pci.ids: Various ID updates.
1572 2000-04-21 Martin Mares <mj@albireo.ucw.cz>
1574 * Released as 2.1.7.
1576 * pciutils.spec: Added German description.
1578 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
1579 are the same as device ID and just output subsystem name according to
1582 * lib/proc.c: Use UNUSED instead of __attribute__((unused)).
1584 * lib/pci.h: Added the correct typedefs for AIX.
1586 * lib/generic.c (pci_generic_scan_bus): Export.
1588 * lib/configure: Detect AIX. Use "echo '...\c'" instead of
1589 "echo -n" if the shell isn't bash.
1591 * lspci.c: Avoid using alloca() if not compiled by GCC.
1592 (insert_dev): Avoid returning a void value.
1594 * Makefile: Choose which install utility to use according to
1595 OS type. Also use `-o' instead of `-or' in find arguments.
1596 Part of the AIX port.
1598 * lib/aix-device.c: Added AIX low-level interface. Contributed
1599 by Dave Johnson <ddj@brown.edu>, thanks a lot!
1601 * pci.ids: Few new ID's.
1603 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline
1604 when not compiled by GCC.
1606 2000-04-17 Martin Mares <mj@albireo.ucw.cz>
1608 * Released as 2.1.6.
1610 * pci.ids: Added a large batch of ID's contributed by Gunther
1611 Mayer <gunther.mayer@braunschweig.netsurf.de> and synced the
1612 list with the 2.3.99pre6 kernel.
1614 Thu Mar 9 13:11:39 2000 Martin Mares <mj@albireo.ucw.cz>
1616 * lib/example.c: Added a simple example of how to use
1619 * lspci.man, setpci.man: Revealed --version. Well spotted
1622 * pci.ids: Added lots of new ID's and synced with 2.3.50.
1624 Tue Feb 15 00:16:21 2000 Martin Mares <mj@albireo.ucw.cz>
1626 * Released as 2.1.5.
1628 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using
1629 %{_mandir} to find the right location to install manual pages to.
1631 * pci.ids: New ID's.
1633 * setpci.c (main): Don't crash when `-s' or `-d' is given with
1636 Mon Jan 24 20:04:11 2000 Andreas Jaeger <aj@suse.de>
1638 * lib/i386-ports.c: Include <asm/io.h> only on systems without
1641 Mon Jan 24 11:24:43 2000 Martin Mares <mj@albireo.ucw.cz>
1643 * Makefile: Modified to work with the Linux FHS brain-damaged idea
1644 of putting man pages to /usr/share/man. Now we choose either /usr/man
1645 or /usr/share/man depending on which one exists.
1647 Sun Jan 23 10:52:34 2000 Martin Mares <mj@albireo.ucw.cz>
1649 * pci.ids: Synced with Linux 2.3.40.
1651 * Released as version 2.1.4.
1653 Thu Jan 20 11:08:32 2000 Martin Mares <mj@albireo.ucw.cz>
1655 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions.
1657 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :(
1659 * lspci.c (format_agp_rate): Better formatting of AGP rates.
1661 * pci.ids: New ID's.
1663 * lib/configure: Added configuration for ia64 (the same as for Alpha).
1664 Patch from Stephane Eranian <eranian@cello.hpl.hp.com>.
1666 Thu Jan 13 23:01:52 2000 Martin Mares <mj@albireo.ucw.cz>
1668 * Released as version 2.1.3.
1670 * pci.ids: New ID's.
1672 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.
1674 * lib/access.c: Corrected order of access methods -- it's wonderful how
1675 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.
1677 Sat Dec 11 23:34:48 1999 Martin Mares <mj@albireo.ucw.cz>
1679 * Released as version 2.1.2.
1681 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.
1683 Sat Dec 4 13:11:03 1999 Martin Mares <mj@albireo.ucw.cz>
1685 * Released as version 2.1.1.
1687 * pci.ids: Several new ID's.
1689 * setpci.c (exec_op): Don't forget to increment address after writing
1690 single value, so that `30.b=12,34,56,78' works as expected. Reported
1691 by Petr Soucek <petr@ryston.cz>.
1693 Wed Nov 3 10:24:38 1999 Martin Mares <mj@albireo.ucw.cz>
1695 * lspci.c (show_terse): If prog-if is zero, but it's present in the
1698 Sat Oct 30 11:06:35 1999 Martin Mares <mj@albireo.ucw.cz>
1700 * Released as version 2.1.
1702 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
1703 lots of contributed entries.
1705 Thu Oct 14 10:40:12 1999 Dave Jones <dave@powertweak.com>
1707 * pci.ids: Added lots of subsystem definitions.
1709 Sat Oct 9 14:32:28 1999 Martin Mares <mj@albireo.ucw.cz>
1711 * setpci.man: Better example.
1713 * lspci.c: Resolve prog-if names.
1715 * lib/names.c: Adapted to new pci.ids syntax.
1717 * pci.ids: Reorganized the pci.ids file. Subsystems are listed
1718 under devices, classes can optionally contain prog-if information.
1719 New ID's, as usually.
1721 Wed Sep 22 09:45:24 1999 Martin Mares <mj@albireo.ucw.cz>
1723 * pci.ids: New ID's. As usually.
1725 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
1726 unless we're vvvery verbose.
1728 Mon Sep 20 11:22:54 1999 Martin Mares <mj@albireo.ucw.cz>
1730 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.
1732 Tue Sep 14 09:31:01 1999 Martin Mares <mj@albireo.ucw.cz>
1734 * pci.ids: New ID's. Again.
1736 Thu Aug 5 17:45:42 1999 Martin Mares <mj@albireo.ucw.cz>
1738 * lspci.c (show_size): Don't show size if it's zero (usually
1739 due to bus-centric mode being enabled).
1741 Tue Jul 20 13:25:09 1999 Martin Mares <mj@albireo.ucw.cz>
1743 * lib/pci.h: Types are OS dependent.
1745 * lib/internal.h: Byte order hacks are OS dependent.
1747 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.
1749 * lib/Makefile, lib/access.c: Added fbsd-device target.
1751 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
1752 incorrectly set to device ID.
1754 * README: Added a note that we support FreeBSD.
1756 * Makefile (PREFIX, ROOT): Set it depending on the OS.
1757 (%.8): Grrr, BSD date is not able to convert date formats the same way
1758 as GNU date does. Use sed instead.
1759 (install): Use `-c' when calling install.
1761 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
1762 by Jari Kirma <kirma@cs.hut.fi>.
1764 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
1765 and pwrite only when we are certain it's safe (i.e., glibc 2.1
1766 on all architectures or any libc on a i386 where we really know
1767 how to use syscalls directly). In all other cases, emulate it
1768 with lseek/read/write.
1770 * pci.ids: Some more IDs.
1772 Mon Jul 19 14:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1774 * pci.ids: Added IDs of parallel port controller cards as sent
1775 by Tim Waugh <tim@cyberelk.demon.co.uk>.
1777 Wed Jul 7 00:55:48 1999 Martin Mares <mj@albireo.ucw.cz>
1779 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.
1781 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
1784 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
1785 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
1786 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
1787 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
1790 * lspci.c (show_msi): Added dumping of the MSI capability.
1791 (show_slotid): The same for SlotID capability.
1792 (show_caps): Seperated capability dumping, because it should
1793 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
1794 layout of htype2, so I'm a bit unsure about it wrt capabilities
1795 -- they at least have to live somewhere else since address 0x34
1796 is already defined differently in htype2.
1798 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
1799 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
1800 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.
1802 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
1803 (required by the PCI 2.2 specs).
1805 Mon Jul 5 12:45:19 1999 Martin Mares <mj@albireo.ucw.cz>
1807 * lspci.c (show_size): Added new function for dumping of region sizes.
1808 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
1811 * lib/pci.h (struct pci_dev): known_fields moved to the public part
1814 * Added support for region sizes. Needs support in the kernel, because
1815 sizes have to be scanned before drivers initialize yourself. pci_fill_info()
1816 now returns a bitmask of what fields were really read.
1818 Mon Jun 28 18:37:51 1999 Dave Jones <dave@powertweak.com>
1821 Added `uninstall' target - removes all traces of pciutils.
1823 - Lots of cleanups in the ATI, S3, Adaptec vendors.
1824 - Changed Compaq QVision 1280/p definitions, as it's not possible
1825 to determine the revision from the device ID.
1826 - Same for the Tseng ET4000.
1827 The id's said I had a rev C, when it was actually a rev B.
1828 - Removed some unnecessary strings
1829 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
1830 `Ethernet card'. This should be determined from config space.
1831 - Lots of other new vendors & devices
1832 - Other additional small cleanups.
1834 Mon Jun 21 22:11:10 1999 Martin Mares <mj@albireo.ucw.cz>
1836 * lib/names.c (pci_lookup_name): When device ID lookup
1837 fails, return hexadecimal device ID instead of vendor ID.
1838 Well spotted by Axel Bodemann <Axel.Bodemann@ruhr-uni-bochum.de>,
1839 I've just extended the fix to subsystem ID's.
1841 Thu Jun 17 19:48:21 1999 Martin Mares <mj@albireo.ucw.cz>
1843 * lspci.c (show_agp): Bug fix from Petr Vandrovec
1844 <vandrove@vc.cvut.cz>. The command register was displayed
1847 Wed Jun 2 22:42:44 1999 Martin Mares <mj@albireo.ucw.cz>
1849 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
1850 numbers if not supplied by the libc.
1852 Wed May 19 13:24:39 1999 Martin Mares <mj@albireo.ucw.cz>
1854 * Released the whole package as version 2.0.
1856 Fri May 14 22:42:02 1999 Martin Mares <mj@albireo.ucw.cz>
1858 * pci.ids: Added several new ID's contributed by people
1859 on the linux-pci list.
1861 Mon Apr 19 15:21:08 1999 Jakub Jelinek <jj@ultra.linux.cz>
1863 * lspci.c: Display I/O addresses correctly on sparc64.
1864 * lib/header.h: Ditto.
1866 * lib/configure: On sparc set HAVE_64BIT* as well, we want
1867 a binary which works on both 32bit and 64bit SPARCs.
1869 Sun Apr 18 21:14:58 1999 Martin Mares <mj@albireo.ucw.cz>
1871 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
1874 * pci.ids: A lot of updates from Adam J. Richter <adam@yggdrasil.com>.
1876 Sun Feb 28 22:26:21 1999 Martin Mares <mj@albireo.ucw.cz>
1878 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
1879 as a multi-function device, because several single-function devices
1880 don't decode the function bits at all.
1882 Sun Feb 14 23:48:22 1999 Martin Mares <mj@albireo.ucw.cz>
1884 * Makefile (install): Don't use "-o root -g root" for installation
1885 since it breaks on machines where programs are not installed by root.
1886 Reported by Richard Gooch <rgooch@atnf.csiro.au>
1888 Tue Feb 9 15:54:39 1999 Martin Mares <mj@albireo.ucw.cz>
1890 * lspci.c (show_bases): Use new address masking macros and pciaddr_t.
1892 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
1893 or 64-bit depending on CPU.
1895 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
1896 according to bus address width.
1898 Thu Jan 28 20:54:16 1999 Martin Mares <mj@albireo.ucw.cz>
1900 * Released as 1.99.4.
1902 * lspci.c: Capability list parser now recognizes both AGP
1903 registers and PCI Power Management registers (the latter
1904 is mainly guesswork based on DEC/Intel 21153 bridge specs
1905 since I don't have the PCI Power Management document).
1907 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
1910 * lspci.c: Added bridge checks to bus mapping code.
1912 Wed Jan 27 14:59:16 1999 Martin Mares <mj@albireo.ucw.cz>
1914 * lspci.c: Implemented bus mapping mode (-M).
1916 * lspci.c (scan_devices): Split to scan_devices() and scan_device().
1917 (show): Split to show() and show_device().
1919 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
1920 set it to the real access method afterwards.
1922 Mon Jan 25 23:46:13 1999 Martin Mares <mj@albireo.ucw.cz>
1924 * lib/generic.c (pci_generic_fill_info): If in buscentric mode,
1925 don't check PCI_COMMAND for I/O and memory enables.
1927 Mon Jan 25 21:28:49 1999 Martin Mares <mj@albireo.ucw.cz>
1929 * Makefile: Added target `release' which substitutes new version
1930 number to .spec, .lsm and README. Also rewrote target `dist'.
1932 * Released as 1.99.3.
1934 Sun Jan 24 22:10:36 1999 Martin Mares <mj@albireo.ucw.cz>
1936 * lib/header.h: Until kernel adopts new layout of PCI
1937 includes (i.e., separate declaration of header structure,
1938 functions and device IDs), which is not going to happen
1939 before 2.3, we'll use our own definiton of the header.
1941 * lspci.c (show_verbose): Display `Cap' flag in device status.
1943 * lspci.c (show_htype0): Display capability lists whereever
1944 available. The only capability name we recognize now is `AGP'.
1945 Unfortunately, capabilities are stored in device-dependent
1946 portion of the configuration space and are thus available
1947 only to root unless you read a dump.
1949 * lspci.c (scan_devices): Use cache instead of buffering.
1951 * lib/buffer.c: Removed (obsoleted by the cache).
1953 * lib/access.c: Added general caching mechanism.
1955 Sat Jan 23 21:30:54 1999 Martin Mares <mj@albireo.ucw.cz>
1957 * pci.ids: Added few devices.
1959 Fri Jan 22 19:29:31 1999 Martin Mares <mj@albireo.ucw.cz>
1961 * Version string is now defined in top-level Makefile, exported
1962 to the configure script and also substituted to man pages.
1964 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
1965 (show_verbose): Rewrote interrupt display logic.
1967 * lib/i386-ports.c: Include sys/io.h only on glibc systems.
1969 * lib/configure: Rewrote detection of Linux versions. Now it
1970 works on 2.0 kernels (only with direct/dump access, of course).
1972 * lib/internal.h: New bytesex macros using <asm/byteorder.h>
1975 * lib/proc.c (proc_read, proc_write): Distinguish between short
1976 read/write and real errors.
1978 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
1979 libpci respects buscentric mode automatically.
1981 * lspci.c (show_hex_dump): For CardBus bridges, print out 128
1982 bytes of header (the whole standard part).
1984 * common.c: pcilib options are now all uppercase. Also moved
1985 PCI access debugging option here.
1987 * Released as 1.99.2.
1989 Wed Jan 20 22:50:35 1999 Martin Mares <mj@albireo.ucw.cz>
1991 * Wrote configure script and rewrote Makefiles.
1993 * Removed few unused variables.
1995 Wed Jan 20 12:21:56 1999 Martin Mares <mj@albireo.ucw.cz>
1997 * common.c: Moved several functions used in both setpci and lspci
1998 here. This includes parsing of libpci-related options.
2000 * More library tweaks.
2002 * filter.c, names.c: Moved to library.
2004 * setpci: Rewritten to use the library.
2006 * Released as 1.99.1.
2008 Tue Jan 19 23:00:12 1999 Martin Mares <mj@albireo.ucw.cz>
2010 * lspci.c (scan_devices): For cardbus bridges, read first 128
2011 bytes of config space to get full standard header.
2013 * Makefile (CFLAGS): Removed "-Wno-unused".
2015 * Started the "New Generation" branch and introduced the
2018 * lspci: Rewritten to use the library.
2020 Tue Jan 19 22:24:08 1999 Martin Mares <mj@albireo.ucw.cz>
2022 * Released as version 1.10.
2024 Mon Jan 18 08:51:17 1999 Martin Mares <mj@albireo.ucw.cz>
2026 * lspci.8, setpci.8: Miscellaneous fixes as suggested by
2027 Dag Wieers <dag@digibel.be>.
2029 Sun Nov 29 20:05:56 1998 Martin Mares <mj@albireo.ucw.cz>
2031 * pciutils.spec (Name): Update from Krzysztof G. Baranowski.
2033 Sun Nov 22 10:49:56 1998 Martin Mares <mj@albireo.ucw.cz>
2035 * Makefile, pciutils.h: Moved pci.ids to /usr/share.
2037 * Released as version 1.09.
2039 Wed Nov 18 15:47:05 1998 Martin Mares <mj@albireo.ucw.cz>
2041 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
2042 bridge. Thanks to Petr Vandrovec <vandrove@vc.cvut.cz> for bug report.
2044 Fri Oct 23 18:59:19 1998 Martin Mares <mj@albireo.ucw.cz>
2046 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.
2048 Mon Oct 19 21:53:30 1998 Martin Mares <mj@albireo.ucw.cz>
2050 * Released as version 1.08.
2052 * setpci.c: glibc 2.1.x already defines pread() and pwrite().
2054 * lspci.8: Changed warning about lspci -xxx.
2056 * lspci.c: Require "-xxx" for full configuration space dump, so that
2057 it's impossible to crash the machine by single typo.
2059 * specs: Added (courtesy of Krzysztof G. Baranowski <kgb@knm.org.pl>).
2061 Wed Sep 9 12:03:24 1998 Martin Mares <mj@albireo.ucw.cz>
2063 * lspci.c (show_bases): Better displaying of unassigned and
2064 disabled bases. Thanks to Gabriel Paubert <paubert@iram.es>
2067 Wed Sep 2 10:58:01 1998 Martin Mares <mj@albireo.ucw.cz>
2069 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
2070 (thanks to Geert Uytterhoeven for finding this out)
2072 Fri Jul 17 10:43:30 1998 Martin Mares <mj@albireo.ucw.cz>
2074 * lspci.c (show_verbose): Print subsystem ID using the new resolver.
2075 (show_machine): Print subsystem ID.
2077 * names.c: New name resolution engine supporting subsystem IDs.
2079 * Released as version 1.07.
2081 Wed Jul 15 15:37:21 1998 Martin Mares <mj@albireo.ucw.cz>
2083 * lspci.c (show_htype2 etc.): Displaying of CardBus headers.
2084 (show_bases): Honor the `cnt' argument.
2085 (grow_tree): Parse CardBus headers in tree mode as well.
2087 * pci.h: Updated CardBus header field description. I still don't
2088 have the CardBus standard available, but OZ6832 specs contain
2089 full description of all header fields supported by the chip.
2091 Tue Jun 9 22:53:59 1998 Martin Mares <mj@albireo.ucw.cz>
2095 * names.c (parse_name_list): Killed an unused variable.
2097 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
2098 if they are not defined by glibc (needed for glibc built on older
2101 * setpci.c (exec_op): Fixed error messages. Thanks, Steve!
2103 Mon Jun 8 10:59:22 1998 Martin Mares <mj@albireo.ucw.cz>
2107 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha
2108 should be gone. Again thanks to Steve for bug report.
2110 * filter.c (filter_parse_slot): Fixed ":x" type filters.
2112 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams
2113 <steve@icarus.com> for reporting this.
2115 Sun Jun 7 19:27:51 1998 Martin Mares <mj@albireo.ucw.cz>
2117 * lspci.c (main), setpci.c (main): Implemented "--version".
2121 * pciutils.h (PCIUTILS_VERSION): Added version string.
2123 * filter.c, names.c: Extraneous #include <linux/pci.h> removed.
2124 Thanks to Geert Uytterhoeven <Geert.Uytterhoeven@cs.kuleuven.ac.be>
2127 Thu May 28 14:45:58 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
2129 * pci.ids: More updates from Jens Maurer.
2131 Wed Apr 22 10:00:39 1998 Martin Mares <mj@albireo.ucw.cz>
2133 * pci.ids: Updates from Jens Maurer.
2135 Sun Apr 19 11:14:25 1998 Martin Mares <mj@albireo.ucw.cz>
2139 * setpci.8: Written.
2141 * setpci.c: Finished.
2143 * lspci.c: Now able to fetch expansion ROM base from kernel device list
2144 and print it if not in buscentric mode.
2146 Tue Mar 31 23:11:57 1998 Martin Mares <mj@albireo.ucw.cz>
2150 Sun Mar 22 15:39:08 1998 Martin Mares <mj@albireo.ucw.cz>
2152 * lspci.8: Updated the documentation.
2154 * lspci.c: Modified to use the new filtering mechanism (options -f and -d).
2156 * filter.c: Introduced new generic device filter.
2158 Thu Mar 19 17:03:48 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
2160 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
2161 of PCI-to-PCI bridges in the tree format.
2163 Sun Feb 15 10:12:25 1998 Martin Mares <mj@albireo.ucw.cz>
2165 * lspci.c (show_machine): Added non-verbose mode of machine-readable
2168 * pci.ids: Updates from Jens Maurer.
2170 * Released as version 1.02.
2172 Thu Feb 12 16:53:28 1998 Martin Mares <mj@lomikel.karlin.mff.cuni.cz>
2174 * lspci.c: Added a "-m" switch for dumping machine-readable
2175 configuration data (requested by Bjoern Kriews <bkr@cut.de>).
2177 Mon Feb 9 13:17:43 1998 Martin Mares <mj@albireo.ucw.cz>
2179 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
2180 if available. This should avoid all problems with official kernel
2181 not synchronized to newer PCI code in CVS -- standard distribution
2182 of pciutils now contains pci.h from current CVS kernel, pciutils
2183 in CVS contain no pci.h and use the correct kernel include.
2185 * Makefile: Fixed installation path for man pages.
2187 Sat Feb 7 15:15:46 1998 Martin Mares <mj@albireo.ucw.cz>
2191 * lspci.8: Created a man page.
2193 * Releasing as version 1.0.
2195 Tue Feb 3 20:56:00 1998 Martin Mares <mj@albireo.ucw.cz>
2197 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
2198 to all the C sources. This should eliminate problems with 32-bit compilers
2201 * lspci.c (show_verbose): Recognize CardBus bridge header type.
2202 (show_htype2): Stub routine.
2203 (scan_config): Write sensible error message if the kernel denies reading of
2204 upper part of the PCI config space.
projects / thirdparty / pciutils.git / blob