network: do not make link in configured state when no address is assigned
When DHCP6 and RA are enabled, and RA does not provide any addresses,
then link may become configured state even if no address is assigned,
due to the time-lag between RA completion and DHCP reply.
This makes if DHCP is explicitly enabled, then link must have at least
one valid address to be in the configured state.
timer: Adjust calendar timers based on monotonic timer instead of realtime
When the RTC time at boot is off in the future by a few days, OnCalendar=
timers will be scheduled based on the time at boot. But if the time has been
adjusted since boot, the timers will end up scheduled way in the future, which
may cause them not to fire as shortly or often as expected.
Update the logic so that the time will be adjusted based on monotonic time.
We do that by calculating the adjusted manager startup realtime from the
monotonic time stored at that time, by comparing that time with the realtime
and monotonic time of the current time.
Added a test case to validate this works as expected. The test case creates a
QEMU virtual machine with the clock 3 days in the future. Then we adjust the
clock back 3 days, and test creating a timer with an OnCalendar= for every 15
minutes. We also check the manager startup timestamp from both `systemd-analyze
dump` and from D-Bus.
Test output without the corresponding code changes that fix the issue:
Timer elapse outside of the expected 20 minute window.
next_elapsed=1594686119
now=1594426921
time_delta=259198
With the code changes in, the test passes as expected.
Judging by https://launchpad.net/~upstream-systemd-ci/+archive/ubuntu/systemd-ci/+packages,
it got updated about 15 hours ago and the "build check" action has been
failing with
```
The following packages have unmet dependencies:
kbd : Depends: console-setup but it is not going to be installed or
E: Unable to correct problems, you have held broken packages.
console-setup-mini but it is not going to be installed
```
since then
pid1: create ro private tmp dirs when /tmp or /var/tmp is read-only
Read-only /var/tmp is more likely, because it's backed by a real device. /tmp
is (by default) backed by tmpfs, but it doesn't have to be. In both cases the
same consideration applies.
If we boot with read-only /var/tmp, any unit with PrivateTmp=yes would fail
because we cannot create the subdir under /var/tmp to mount the private directory.
But many services actually don't require /var/tmp (either because they only use
it occasionally, or because they only use /tmp, or even because they don't use the
temporary directories at all, and PrivateTmp=yes is used to isolate them from
the rest of the system).
To handle both cases let's create a read-only directory under /run/systemd and
mount it as the private /tmp or /var/tmp. (Read-only to not fool the service into
dumping too much data in /run.)
$ sudo systemd-run -t -p PrivateTmp=yes bash
Running as unit: run-u14.service
Press ^] three times within 1s to disconnect TTY.
[root@workstation /]# ls -l /tmp/
total 0
[root@workstation /]# ls -l /var/tmp/
total 0
[root@workstation /]# touch /tmp/f
[root@workstation /]# touch /var/tmp/f
touch: cannot touch '/var/tmp/f': Read-only file system
This commit has more changes than I like to put in one commit, but it's touching all
the same paths so it's hard to split.
exec_runtime_make() was using the wrong cleanup function, so the directory would be
left behind on error.
nss-mymachines: drop support for UID/GID resolving
Now that we make the user/group name resolving available via userdb and
thus nss-systemd, we do not need the UID/GID resolving support in
nss-mymachines anymore. Let's drop it hence.
We keep the module around, since besides UID/GID resolving it also does
hostname resolving, which we care about. (One of those days we should
replace that by some Varlink logic between
nss-resolve/systemd-resolved.service too)
The hooks are kept in the NSS module, but they do not resolve anything
anymore, in order to keep compat at a maximum.
docs: permit user/group services that do not support enumeration
sssd people don't like enumeration and for some other cases it's not
nice to support either, in particular when synthesizing records for
container/userns UID/GID ranges.
Let's add a catalog entry explaining further details.
Most importantly though: talk to PID 1 directly, via the private D-Bus
socket, so that this actually works correctly during early boot, where
D-Bus is not around.
Apparently systemd is no longer installed in fedora containers
by default
```
docker: Error response from daemon: OCI runtime create failed: container_linux.go:348:
starting container process caused "exec: \"/sbin/init\": stat /sbin/init: no such file or directory": unknown.
The command "$CI_MANAGERS/fedora.sh SETUP" failed and exited with 127 during .
```
repart: include more relevant information in the warning message, fix test
The test would always fail with a long uname. In F33 this is right
now "5.8.0-0.rc2.20200622git625d3449788f.1.fc33.x86_64" which caused the
test to always fail.
rpm: avoid hiding errors and output in *_create_package macros
Commit b0ca726585 "rpm: avoid hiding errors from systemd commands" remove hiding errors and output
for other macros, but did not do that for %sysusers_create_package and %tmpfiles_create_package.
This change syncs their behaviour with %sysusers_create and %tmpfiles_create
The last line in this macros was actually "SYSTEMD_INLINE_EOF " with a space at the end,
but the shell was instructed to look for a line without space.
Macros %sysusers_create_inline and %tmpfiles_create_inline did not have this mistake.
An example:
[root@rosa-2019 bind-server]# cat /etc/passwd | grep named
[root@rosa-2019 bind-server]# cat /tmp/bs
systemd-sysusers --replace=/usr/lib/sysusers.d/named.conf - <<SYSTEMD_INLINE_EOF >/dev/null 2>&1 || :
u named - "BIND DNS Server" /var/lib/named
g named - -
m named named
SYSTEMD_INLINE_EOF
[root@rosa-2019 bind-server]# sh /tmp/bs
/tmp/bs: line 5: warning: here-document at line 1 delimited by end-of-file (wanted `SYSTEMD_INLINE_EOF')
[root@rosa-2019 bind-server]# bash /tmp/bs
/tmp/bs: line 5: warning: here-document at line 1 delimited by end-of-file (wanted `SYSTEMD_INLINE_EOF')
[root@rosa-2019 bind-server]# bash --version
GNU bash, version 5.0.17(1)-release (x86_64-openmandriva-linux-gnu)
The user and group named were NOT created!
Now I remove the trailing space after "SYSTEMD_INLINE_EOF" and rerun:
[root@rosa-2019 bind-server]# sh /tmp/bs
[root@rosa-2019 bind-server]# tail -n 1 /etc/group
named:x:485:named
[root@rosa-2019 bind-server]#
selinux: create standard user-runtime nodes with default context
Currently systemd-user-runtime-dir does not create the files in
/run/user/$UID/systemd/inaccessible with the default SELinux label.
The user and role part of these labels should be based on the user
related to $UID and not based on the process context of
systemd-user-runtime-dir.
Since v246-rc1 (9664be199af6) /run/user/$UID/systemd is also created by
systemd-user-runtime-dir and should also be created with the default
SELinux context.
This commit enables the microphone mute button and the screen rotate button, even if the latter is improperly linked. I have documented how to achieve this in https://wiki.archlinux.org/index.php/MSI_P15#Fn_Keys .
basic/capability-util: let cap_last_cap() return unsigned integer
We never return anything higher than 63, so using "long unsigned"
as the type only confused the reader. (We can still use "long unsigned"
and safe_atolu() to parse the kernel file.)
We would refuse to print capabilities which were didn't have a name
for. The kernel adds new capabilities from time to time, most recently
cap_bpf. 'systmectl show -p CapabilityBoundingSet ...' would fail with
"Failed to parse bus message: Invalid argument" because
capability_set_to_string_alloc() would fail with -EINVAL. So let's
print such capabilities in hexadecimal:
The call would always fail with:
systemd-userwork[780]: Failed to dlopen(libnss_systemd.so.2), ignoring: /usr/lib64libnss_systemd.so.2: cannot open shared object file: No such file or directory
xdg-autostart: ignore all empty entries in multi-string entries
The desktop file specification allows entries like ";;;;;;", full of empty strings.
But looking at the actual list of supported keys [1], empty entries are meaningless
(unless we would allow e.g. the desktop name to be the empty string. But that doesn't
seem very useful either). So let's just simplify our life and skip any empty substrings
entirely.
This would also resolve the fuzzer case:
$ valgrind build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812
test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812... ok
==2899241== HEAP SUMMARY:
==2899241== in use at exit: 0 bytes in 0 blocks
==2899241== total heap usage: 484,385 allocs, 484,385 frees, 12,411,330 bytes allocated
↓
==2899650== HEAP SUMMARY:
==2899650== in use at exit: 0 bytes in 0 blocks
==2899650== total heap usage: 1,325 allocs, 1,325 frees, 1,463,602 bytes allocated
xdg-autostart: avoid quadratic behaviour in strv parsing
The fuzzer test case has a giant line with ";;;;;;;;;;;..." which is turned into
a strv of empty strings. Unfortunately, when pushing each string, strv_push() needs
to walk the whole array, which leads to quadratic behaviour. So let's use
greedy_allocation here and also keep location in the string to avoid iterating.
build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812 51.10s user 0.01s system 99% cpu 51.295 total
↓
build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812 0.07s user 0.01s system 96% cpu 0.083 total
Other minor changes:
- say "was already defined" instead of "defined multiple times" to make it
clear that we're ignoring this second definition, and not all definitions
of the key
- unescaping needs to be done also for the last entry
projects / thirdparty / systemd.git / log
