-# Traditional Chinese Messages for util-linux-ng.
+# Traditional Chinese Messages for util-linux.
# Copyright (C) 2005 Free Software Foundation, Inc.
-# This file is distributed under the same license as the util-linux-ng package.
-# Wei-Lun Chao <chaoweilun@gmail.com>, 2010.
+# This file is distributed under the same license as the util-linux package.
+# Wei-Lun Chao <bluebat@member.fsf.org>, 2010.
#
msgid ""
msgstr ""
-"Project-Id-Version: util-linux-ng 2.18-rc2\n"
+"Project-Id-Version: util-linux 2.23.1\n"
"Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
-"POT-Creation-Date: 2012-02-24 11:35+0100\n"
-"PO-Revision-Date: 2010-08-22 00:14+0800\n"
-"Last-Translator: Wei-Lun Chao <chaoweilun@gmail.com>\n"
+"POT-Creation-Date: 2020-01-08 10:06+0100\n"
+"PO-Revision-Date: 2013-06-07 23:29+0800\n"
+"Last-Translator: Wei-Lun Chao <bluebat@member.fsf.org>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: disk-utils/blockdev.c:61
+#: disk-utils/addpart.c:15
+#, fuzzy, c-format
+msgid " %s <disk device> <partition number> <start> <length>\n"
+msgstr " %s <disk device><分割區編號><開始><長度>\n"
+
+#: disk-utils/addpart.c:19
+msgid "Tell the kernel about the existence of a specified partition.\n"
+msgstr ""
+
+#: disk-utils/addpart.c:52 disk-utils/blockdev.c:244 disk-utils/delpart.c:52
+#: disk-utils/mkfs.bfs.c:127 disk-utils/resizepart.c:96 misc-utils/kill.c:314
+#: misc-utils/kill.c:376 misc-utils/rename.c:280 misc-utils/whereis.c:533
+#: sys-utils/flock.c:177 sys-utils/ipcrm.c:160 sys-utils/ldattach.c:368
+#: sys-utils/renice.c:144 sys-utils/switch_root.c:240 sys-utils/tunelp.c:152
+#: term-utils/agetty.c:888 term-utils/agetty.c:889 term-utils/agetty.c:897
+#: term-utils/agetty.c:898
+#, fuzzy
+msgid "not enough arguments"
+msgstr "不足引數"
+
+#: disk-utils/addpart.c:57 disk-utils/blockdev.c:293 disk-utils/blockdev.c:437
+#: disk-utils/blockdev.c:463 disk-utils/cfdisk.c:2721 disk-utils/delpart.c:58
+#: disk-utils/fdformat.c:229 disk-utils/fdisk.c:780 disk-utils/fdisk.c:1085
+#: disk-utils/fdisk-list.c:326 disk-utils/fdisk-list.c:366
+#: disk-utils/fdisk-list.c:385 disk-utils/fsck.c:1468
+#: disk-utils/fsck.cramfs.c:152 disk-utils/fsck.cramfs.c:511
+#: disk-utils/isosize.c:53 disk-utils/mkfs.bfs.c:186
+#: disk-utils/mkfs.cramfs.c:171 disk-utils/mkfs.cramfs.c:660
+#: disk-utils/mkfs.cramfs.c:799 disk-utils/mkfs.minix.c:823
+#: disk-utils/mkswap.c:217 disk-utils/mkswap.c:246 disk-utils/partx.c:1019
+#: disk-utils/resizepart.c:104 disk-utils/sfdisk.c:476 disk-utils/sfdisk.c:724
+#: disk-utils/sfdisk.c:780 disk-utils/sfdisk.c:834 disk-utils/sfdisk.c:893
+#: disk-utils/sfdisk.c:972 disk-utils/sfdisk.c:1013 disk-utils/sfdisk.c:1043
+#: disk-utils/sfdisk.c:1080 disk-utils/sfdisk.c:1641 disk-utils/swaplabel.c:65
+#: libfdisk/src/bsd.c:642 login-utils/islocal.c:87 login-utils/last.c:667
+#: login-utils/sulogin.c:444 login-utils/sulogin.c:481
+#: login-utils/utmpdump.c:134 login-utils/utmpdump.c:355
+#: login-utils/utmpdump.c:375 login-utils/vipw.c:261 login-utils/vipw.c:279
+#: misc-utils/findmnt.c:1106 misc-utils/logger.c:1241 misc-utils/mcookie.c:115
+#: misc-utils/uuidd.c:198 sys-utils/blkdiscard.c:181 sys-utils/blkzone.c:96
+#: sys-utils/dmesg.c:527 sys-utils/eject.c:500 sys-utils/eject.c:699
+#: sys-utils/fallocate.c:399 sys-utils/fsfreeze.c:116 sys-utils/fstrim.c:102
+#: sys-utils/hwclock.c:233 sys-utils/hwclock.c:873 sys-utils/hwclock-rtc.c:138
+#: sys-utils/hwclock-rtc.c:403 sys-utils/hwclock-rtc.c:438
+#: sys-utils/ldattach.c:392 sys-utils/lscpu.c:527 sys-utils/nsenter.c:129
+#: sys-utils/rfkill.c:192 sys-utils/rfkill.c:553 sys-utils/rtcwake.c:137
+#: sys-utils/rtcwake.c:290 sys-utils/setpriv.c:259 sys-utils/setpriv.c:628
+#: sys-utils/setpriv.c:651 sys-utils/swapon.c:375 sys-utils/swapon.c:518
+#: sys-utils/switch_root.c:167 sys-utils/unshare.c:116 sys-utils/unshare.c:131
+#: sys-utils/wdctl.c:361 sys-utils/zramctl.c:515 term-utils/agetty.c:2938
+#: term-utils/mesg.c:143 term-utils/script.c:382 term-utils/scriptlive.c:256
+#: term-utils/scriptlive.c:259 term-utils/scriptlive.c:262
+#: term-utils/scriptreplay.c:260 term-utils/scriptreplay.c:263
+#: term-utils/scriptreplay.c:266 term-utils/scriptreplay.c:269
+#: term-utils/wall.c:421 text-utils/colcrt.c:284 text-utils/more.c:361
+#: text-utils/rev.c:139 text-utils/ul.c:230
+#, c-format
+msgid "cannot open %s"
+msgstr "無法開啟 %s"
+
+#: disk-utils/addpart.c:60 disk-utils/delpart.c:61 disk-utils/resizepart.c:101
+#, fuzzy
+msgid "invalid partition number argument"
+msgstr "無效的分割區編號引數"
+
+#: disk-utils/addpart.c:61
+#, fuzzy
+msgid "invalid start argument"
+msgstr "無效的開始引數"
+
+#: disk-utils/addpart.c:62 disk-utils/resizepart.c:111
+#, fuzzy
+msgid "invalid length argument"
+msgstr "無效的長度引數"
+
+#: disk-utils/addpart.c:63
+#, fuzzy
+msgid "failed to add partition"
+msgstr "加入分割時失敗"
+
+#: disk-utils/blockdev.c:63
msgid "set read-only"
msgstr "設定唯讀"
-#: disk-utils/blockdev.c:68
+#: disk-utils/blockdev.c:70
msgid "set read-write"
msgstr "設定可讀寫"
-#: disk-utils/blockdev.c:74
+#: disk-utils/blockdev.c:76
msgid "get read-only"
msgstr "取得唯讀"
-#: disk-utils/blockdev.c:80
+#: disk-utils/blockdev.c:82
+#, fuzzy
msgid "get discard zeroes support status"
-msgstr ""
+msgstr "提取捨棄零支援狀態"
-#: disk-utils/blockdev.c:86
+#: disk-utils/blockdev.c:88
msgid "get logical block (sector) size"
msgstr "取得邏輯區塊 (磁區) 大小"
-#: disk-utils/blockdev.c:92
+#: disk-utils/blockdev.c:94
msgid "get physical block (sector) size"
msgstr "取得實際區塊 (磁區) 大小"
-#: disk-utils/blockdev.c:98
+#: disk-utils/blockdev.c:100
msgid "get minimum I/O size"
msgstr "取得最小 I/O 大小"
-#: disk-utils/blockdev.c:104
+#: disk-utils/blockdev.c:106
msgid "get optimal I/O size"
msgstr "取得最佳化 I/O 大小"
-#: disk-utils/blockdev.c:110
+#: disk-utils/blockdev.c:112
#, fuzzy
msgid "get alignment offset in bytes"
-msgstr "取得對齊偏移值"
+msgstr "提取對齊偏移在中位元組"
-#: disk-utils/blockdev.c:116
+#: disk-utils/blockdev.c:118
msgid "get max sectors per request"
msgstr "取得單一要求最大磁區"
-#: disk-utils/blockdev.c:122
+#: disk-utils/blockdev.c:124
msgid "get blocksize"
msgstr "取得區塊大小"
-#: disk-utils/blockdev.c:129
-msgid "set blocksize"
-msgstr "設定區塊大小"
+#: disk-utils/blockdev.c:131
+msgid "set blocksize on file descriptor opening the block device"
+msgstr ""
-#: disk-utils/blockdev.c:135
+#: disk-utils/blockdev.c:137
#, fuzzy
msgid "get 32-bit sector count (deprecated, use --getsz)"
-msgstr "取得 32-bit 磁區數"
+msgstr "提取 32-bit 磁區計數 (不宜用，使用 --getsz)"
-#: disk-utils/blockdev.c:141
+#: disk-utils/blockdev.c:143
msgid "get size in bytes"
msgstr "以位元組為單位取得大小"
-#: disk-utils/blockdev.c:148
+#: disk-utils/blockdev.c:150
msgid "set readahead"
msgstr "設定預先讀取"
-#: disk-utils/blockdev.c:154
+#: disk-utils/blockdev.c:156
msgid "get readahead"
msgstr "取得預先讀取"
-#: disk-utils/blockdev.c:161
+#: disk-utils/blockdev.c:163
msgid "set filesystem readahead"
msgstr "設定檔案系統預先讀取"
-#: disk-utils/blockdev.c:167
+#: disk-utils/blockdev.c:169
msgid "get filesystem readahead"
msgstr "取得檔案系統預先讀取"
-#: disk-utils/blockdev.c:171
+#: disk-utils/blockdev.c:173
msgid "flush buffers"
msgstr "清理緩衝區"
-#: disk-utils/blockdev.c:175
+#: disk-utils/blockdev.c:177
msgid "reread partition table"
msgstr "重新讀取分割表"
-#: disk-utils/blockdev.c:182
+#: disk-utils/blockdev.c:187
#, c-format
msgid ""
-"\n"
-"Usage:\n"
-" %1$s -V\n"
-" %1$s --report [devices]\n"
" %1$s [-v|-q] commands devices\n"
-"\n"
-"Available commands:\n"
+" %1$s --report [devices]\n"
+" %1$s -h|-V\n"
+msgstr ""
+
+#: disk-utils/blockdev.c:193
+msgid "Call block device ioctls from the command line."
+msgstr ""
+
+#: disk-utils/blockdev.c:196
+#, fuzzy
+msgid " -q quiet mode"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: disk-utils/blockdev.c:197
+#, fuzzy
+msgid " -v verbose mode"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: disk-utils/blockdev.c:198
+msgid " --report print report for specified (or all) devices"
msgstr ""
-#: disk-utils/blockdev.c:188
+#: disk-utils/blockdev.c:203
+#, fuzzy
+msgid "Available commands:"
+msgstr "可用欄位：\n"
+
+#: disk-utils/blockdev.c:204
#, fuzzy, c-format
msgid " %-25s get size in 512-byte sectors\n"
-msgstr "以 512 位元組為單位取得大小"
+msgstr " %-25s 提取大小在中 512-byte 磁區\n"
-#: disk-utils/blockdev.c:230 disk-utils/fsck.minix.c:1270
-#: disk-utils/isosize.c:196 disk-utils/mkfs.c:59 disk-utils/mkfs.minix.c:666
-#: misc-utils/ddate.c:181 sys-utils/swapon.c:733 sys-utils/swapon.c:785
-#, c-format
-msgid "%s (%s)\n"
-msgstr "%s (%s)\n"
-
-#: disk-utils/blockdev.c:274 disk-utils/blockdev.c:418
-#: disk-utils/blockdev.c:443 disk-utils/mkfs.bfs.c:182
-#: disk-utils/mkfs.cramfs.c:793 sys-utils/cytune.c:177 sys-utils/cytune.c:407
-#: sys-utils/cytune.c:421 sys-utils/cytune.c:437 sys-utils/ldattach.c:291
-#, c-format
-msgid "cannot open %s"
-msgstr "無法開啟 %s"
+#: disk-utils/blockdev.c:286 disk-utils/fdformat.c:219
+#: disk-utils/fsck.minix.c:1340 disk-utils/isosize.c:155
+#: disk-utils/mkfs.bfs.c:175 disk-utils/mkfs.c:110 disk-utils/mkfs.minix.c:812
+#: disk-utils/swaplabel.c:180 misc-utils/wipefs.c:756
+#: sys-utils/blkdiscard.c:170 sys-utils/blkzone.c:402 sys-utils/tunelp.c:241
+#: sys-utils/zramctl.c:708 sys-utils/zramctl.c:734
+#, fuzzy
+msgid "no device specified"
+msgstr "沒有迴圈裝置指定的"
-#: disk-utils/blockdev.c:309
+#: disk-utils/blockdev.c:328
#, fuzzy
msgid "could not get device size"
-msgstr "無法取得磁碟大小"
+msgstr "無法提取裝置大小"
-#: disk-utils/blockdev.c:315
+#: disk-utils/blockdev.c:334
#, fuzzy, c-format
msgid "Unknown command: %s"
-msgstr "%s：不明的命令：%s\n"
+msgstr "不明命令：%s"
-#: disk-utils/blockdev.c:331
+#: disk-utils/blockdev.c:350
#, fuzzy, c-format
msgid "%s requires an argument"
-msgstr "%s 需要一個引數\n"
+msgstr "%s 需要一個引數"
-#: disk-utils/blockdev.c:368
+#: disk-utils/blockdev.c:385 disk-utils/blockdev.c:494
+#, fuzzy, c-format
+msgid "ioctl error on %s"
+msgstr "ioctl 錯誤於 %s"
+
+#: disk-utils/blockdev.c:387
#, c-format
msgid "%s failed.\n"
msgstr "%s 失敗。\n"
-#: disk-utils/blockdev.c:375
+#: disk-utils/blockdev.c:394
#, c-format
msgid "%s succeeded.\n"
msgstr "%s 成功。\n"
-#: disk-utils/blockdev.c:459
+#: disk-utils/blockdev.c:480
#, fuzzy, c-format
-msgid "ioctl error on %s"
-msgstr "%s：ioctl 錯誤發生於 %s\n"
+msgid "%s: failed to read partition start from sysfs"
+msgstr "%s：無法讀取分割表"
-#: disk-utils/blockdev.c:467
+#: disk-utils/blockdev.c:502
#, c-format
msgid "RO RA SSZ BSZ StartSec Size Device\n"
msgstr "RO RA SSZ BSZ 起始磁區 大小 裝置\n"
-#: disk-utils/elvtune.c:48
-#, c-format
-msgid "usage:\n"
-msgstr "用法：\n"
+#: disk-utils/cfdisk.c:190
+msgid "Bootable"
+msgstr "可開機"
-#: disk-utils/elvtune.c:53
-#, c-format
-msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
-msgstr "\t註記：elvtune 只適用於 2.4 內核\n"
+#: disk-utils/cfdisk.c:190
+msgid "Toggle bootable flag of the current partition"
+msgstr "切換目前分割區的屬性旗標"
-#: disk-utils/elvtune.c:107
-#, c-format
-msgid "missing blockdevice, use -h for help\n"
-msgstr "缺少區塊裝置，使用 -h 以獲得說明\n"
+#: disk-utils/cfdisk.c:191
+msgid "Delete"
+msgstr "刪除"
-#: disk-utils/elvtune.c:128
-#, c-format
-msgid ""
-"\n"
-"elvtune is only useful on older kernels;\n"
-"for 2.6 use IO scheduler sysfs tunables instead..\n"
+#: disk-utils/cfdisk.c:191
+msgid "Delete the current partition"
+msgstr "刪除目前的分割區"
+
+#: disk-utils/cfdisk.c:192
+msgid "Resize"
msgstr ""
-"\n"
-" elvtune 只適用於舊的內核；\n"
-"於 2.6 請使用 IO 排程程式 sysfs tunables 做為替代。\n"
-#: disk-utils/fdformat.c:27
-#, c-format
-msgid "Formatting ... "
-msgstr "格式化中…"
+#: disk-utils/cfdisk.c:192
+#, fuzzy
+msgid "Reduce or enlarge the current partition"
+msgstr "刪除目前的分割區"
-#: disk-utils/fdformat.c:47 disk-utils/fdformat.c:87
-#, c-format
-msgid "done\n"
-msgstr "已完成\n"
+#: disk-utils/cfdisk.c:193
+msgid "New"
+msgstr "新增"
-#: disk-utils/fdformat.c:58
-#, c-format
-msgid "Verifying ... "
-msgstr "驗證中…"
+#: disk-utils/cfdisk.c:193
+msgid "Create new partition from free space"
+msgstr "從剩餘空間新增一個新的分割區"
-#: disk-utils/fdformat.c:61 disk-utils/fdformat.c:153
-#: disk-utils/mkfs.cramfs.c:663 term-utils/wall.c:262
-#, fuzzy, c-format
-msgid "cannot open file %s"
-msgstr "無法開啟檔案 '%s'"
+#: disk-utils/cfdisk.c:194
+msgid "Quit"
+msgstr "離開"
-#: disk-utils/fdformat.c:70
-msgid "Read: "
-msgstr "讀取："
+#: disk-utils/cfdisk.c:194
+#, fuzzy
+msgid "Quit program without writing changes"
+msgstr "離開本程式且不寫入分割表"
-#: disk-utils/fdformat.c:72
-#, c-format
-msgid "Problem reading cylinder %d, expected %d, read %d\n"
-msgstr "問題發生在讀取第 %d 個磁柱時，預計資料為 %d，實際讀取資料為 %d\n"
+#: disk-utils/cfdisk.c:195 libfdisk/src/bsd.c:439 libfdisk/src/bsd.c:1031
+#: libfdisk/src/dos.c:2501 libfdisk/src/gpt.c:3009 libfdisk/src/sgi.c:1160
+#: libfdisk/src/sun.c:1136
+msgid "Type"
+msgstr "類型"
-#: disk-utils/fdformat.c:80
-#, c-format
-msgid ""
-"bad data in cyl %d\n"
-"Continuing ... "
-msgstr ""
-"第 %d 個磁柱有壞資料。\n"
-"繼續進行..."
+#: disk-utils/cfdisk.c:195
+#, fuzzy
+msgid "Change the partition type"
+msgstr "列印分割表"
-#: disk-utils/fdformat.c:94
-#, fuzzy, c-format
-msgid "Usage: %s [options] device\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: disk-utils/cfdisk.c:196
+msgid "Help"
+msgstr "求助"
-#: disk-utils/fdformat.c:97
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -n, --no-verify disable the verification after the format\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: disk-utils/cfdisk.c:196
+msgid "Print help screen"
+msgstr "顯示說明畫面"
+
+#: disk-utils/cfdisk.c:197
+msgid "Sort"
msgstr ""
-#: disk-utils/fdformat.c:129 disk-utils/mkfs.bfs.c:88
-#: disk-utils/mkfs.cramfs.c:772 disk-utils/mkswap.c:526 fdisk/sfdisk.c:2629
-#: fsck/fsck.c:1451 getopt/getopt.c:430 hwclock/hwclock.c:1353
-#: misc-utils/cal.c:351 misc-utils/kill.c:195 misc-utils/logger.c:234
-#: misc-utils/look.c:124 misc-utils/mcookie.c:116 misc-utils/namei.c:458
-#: misc-utils/rename.c:99 misc-utils/uuidd.c:505 misc-utils/uuidgen.c:75
-#: misc-utils/whereis.c:464 misc-utils/wipefs.c:395 schedutils/ionice.c:169
-#: sys-utils/chcpu.c:297 sys-utils/cytune.c:381 sys-utils/dmesg.c:765
-#: sys-utils/lscpu.c:1301 term-utils/agetty.c:681 term-utils/mesg.c:103
-#: term-utils/script.c:211 term-utils/scriptreplay.c:170
-#: term-utils/setterm.c:811 term-utils/wall.c:139 term-utils/write.c:110
-#: text-utils/col.c:210 text-utils/colcrt.c:116 text-utils/colrm.c:171
-#: text-utils/column.c:150 text-utils/hexsyntax.c:114 text-utils/rev.c:112
-#: text-utils/tailf.c:263 text-utils/ul.c:193
-#, c-format
-msgid "%s from %s\n"
-msgstr "%s 來自 %s\n"
+#: disk-utils/cfdisk.c:197
+#, fuzzy
+msgid "Fix partitions order"
+msgstr "修正分割排序"
-#: disk-utils/fdformat.c:144
-#, fuzzy, c-format
-msgid "cannot stat file %s"
-msgstr "無法識別裝置狀態 %s"
+#: disk-utils/cfdisk.c:198
+msgid "Write"
+msgstr "寫入"
-#: disk-utils/fdformat.c:147 misc-utils/lsblk.c:833 partx/partx.c:840
-#: sys-utils/mountpoint.c:102
-#, fuzzy, c-format
-msgid "%s: not a block device"
-msgstr "%s：不是區塊裝置\n"
+#: disk-utils/cfdisk.c:198
+msgid "Write partition table to disk (this might destroy data)"
+msgstr "寫入分割表至硬碟中 (可能使該分割區中的資料消失!)"
-#: disk-utils/fdformat.c:149
-#, fuzzy, c-format
-msgid "cannot access file %s"
-msgstr "無法開啟檔案 '%s'"
+#: disk-utils/cfdisk.c:199
+msgid "Dump"
+msgstr ""
-#: disk-utils/fdformat.c:155
-msgid "Could not determine current format type"
-msgstr "無法決定目前的格式類型"
+#: disk-utils/cfdisk.c:199
+#, fuzzy
+msgid "Dump partition table to sfdisk compatible script file"
+msgstr "印出分割表至螢幕或檔案"
-#: disk-utils/fdformat.c:157
+#: disk-utils/cfdisk.c:644 disk-utils/fdisk.c:465
#, c-format
-msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
-msgstr "%s面、%d 磁軌、%d 磁區/磁軌。總容量 %d kB。\n"
+msgid "internal error: unsupported dialog type %d"
+msgstr ""
-#: disk-utils/fdformat.c:158
-msgid "Double"
-msgstr "雙"
+#: disk-utils/cfdisk.c:1279
+#, fuzzy, c-format
+msgid "%s (mounted)"
+msgstr "%s：無法掛載"
-#: disk-utils/fdformat.c:158
-msgid "Single"
-msgstr "單"
+#: disk-utils/cfdisk.c:1299
+#, fuzzy
+msgid "Partition name:"
+msgstr "分割名稱"
-#: disk-utils/fsck.cramfs.c:113
-#, c-format
-msgid ""
-"usage: %s [-hv] [-x dir] file\n"
-" -h print this help\n"
-" -x dir extract into dir\n"
-" -v be more verbose\n"
-" file file to test\n"
-msgstr ""
-"用法：%s [-hv] [-x dir] file\n"
-" -h 印出這個說明\n"
-" -x dir 解開到目錄\n"
-" -v 更詳細的訊息\n"
-" file 用來測試的檔案\n"
+#: disk-utils/cfdisk.c:1306
+#, fuzzy
+msgid "Partition UUID:"
+msgstr "分割 UUID"
-#: disk-utils/fsck.cramfs.c:141
-#, c-format
-msgid "stat failed: %s"
-msgstr "狀態取得失敗：%s"
+#: disk-utils/cfdisk.c:1318
+#, fuzzy
+msgid "Partition type:"
+msgstr "分割區編號"
-#: disk-utils/fsck.cramfs.c:145 disk-utils/fsck.cramfs.c:497
-#: sys-utils/rtcwake.c:117 sys-utils/rtcwake.c:276 sys-utils/rtcwake.c:514
-#: term-utils/script.c:232 term-utils/script.c:553
-#, c-format
-msgid "open failed: %s"
-msgstr "開啟失敗：%s"
+#: disk-utils/cfdisk.c:1325
+msgid "Attributes:"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:151
-#, c-format
-msgid "ioctl failed: unable to determine device size: %s"
-msgstr "ioctl 失敗：無法決定裝置大小：%s"
+#: disk-utils/cfdisk.c:1349
+#, fuzzy
+msgid "Filesystem UUID:"
+msgstr "檔案系統 UUID"
-#: disk-utils/fsck.cramfs.c:157
-#, c-format
-msgid "not a block device or file: %s"
-msgstr "不是區塊裝置或檔案：%s"
+#: disk-utils/cfdisk.c:1356
+#, fuzzy
+msgid "Filesystem LABEL:"
+msgstr "檔案系統標貼"
-#: disk-utils/fsck.cramfs.c:160 disk-utils/fsck.cramfs.c:194
-msgid "file length too short"
-msgstr "檔案長度太短"
+#: disk-utils/cfdisk.c:1362
+#, fuzzy
+msgid "Filesystem:"
+msgstr "郵件系統"
-#: disk-utils/fsck.cramfs.c:164 disk-utils/fsck.cramfs.c:170
-#: disk-utils/fsck.cramfs.c:226 disk-utils/fsck.cramfs.c:243
-#, c-format
-msgid "read failed: %s"
-msgstr "讀取失敗：%s"
+#: disk-utils/cfdisk.c:1367
+#, fuzzy
+msgid "Mountpoint:"
+msgstr "mountpoint"
-#: disk-utils/fsck.cramfs.c:174 disk-utils/fsck.cramfs.c:176
-msgid "superblock magic not found"
-msgstr "找不到超區塊的魔術標記"
+#: disk-utils/cfdisk.c:1711
+#, fuzzy, c-format
+msgid "Disk: %s"
+msgstr "磁碟：%.*s\n"
-#: disk-utils/fsck.cramfs.c:179
-#, c-format
-msgid "cramfs endianness is %s\n"
+#: disk-utils/cfdisk.c:1713
+#, fuzzy, c-format
+msgid "Size: %s, %<PRIu64> bytes, %ju sectors"
msgstr ""
+"\n"
+"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: disk-utils/fsck.cramfs.c:180
-msgid "big"
-msgstr ""
+#: disk-utils/cfdisk.c:1716
+#, fuzzy, c-format
+msgid "Label: %s, identifier: %s"
+msgstr "磁碟識別碼：0x%08x\n"
-#: disk-utils/fsck.cramfs.c:180
-msgid "little"
+#: disk-utils/cfdisk.c:1719
+#, fuzzy, c-format
+msgid "Label: %s"
+msgstr "標籤：%.*s\n"
+
+#: disk-utils/cfdisk.c:1869
+msgid "May be followed by M for MiB, G for GiB, T for TiB, or S for sectors."
msgstr ""
-#: disk-utils/fsck.cramfs.c:184
-msgid "unsupported filesystem features"
-msgstr "不受支援的檔案系統特徵"
+#: disk-utils/cfdisk.c:1875
+#, fuzzy
+msgid "Please, specify size."
+msgstr "未指定任何檔名。"
-#: disk-utils/fsck.cramfs.c:187
-#, c-format
-msgid "superblock size (%d) too small"
-msgstr "超區塊大小 (%d) 太小"
+#: disk-utils/cfdisk.c:1897
+#, fuzzy, c-format
+msgid "Minimum size is %<PRIu64> bytes."
+msgstr "以位元組為單位取得大小"
-#: disk-utils/fsck.cramfs.c:192
-msgid "zero file count"
-msgstr "零個檔案計數"
+#: disk-utils/cfdisk.c:1906
+#, fuzzy, c-format
+msgid "Maximum size is %<PRIu64> bytes."
+msgstr "以位元組為單位取得大小"
-#: disk-utils/fsck.cramfs.c:197
-#, c-format
-msgid "warning: file extends past end of filesystem\n"
-msgstr "警告：檔案延伸超過檔案系統末端\n"
+#: disk-utils/cfdisk.c:1913
+#, fuzzy
+msgid "Failed to parse size."
+msgstr "剖析大小時失敗"
-#: disk-utils/fsck.cramfs.c:199
-#, c-format
-msgid "warning: old cramfs format\n"
-msgstr "警告：舊的 cramfs 格式\n"
+#: disk-utils/cfdisk.c:1971
+#, fuzzy
+msgid "Select partition type"
+msgstr "已選分割區 %d\n"
-#: disk-utils/fsck.cramfs.c:211
-msgid "unable to test CRC: old cramfs format"
-msgstr "無法測試循環冗餘檢查：舊的 cramfs 格式"
+#: disk-utils/cfdisk.c:2021 disk-utils/cfdisk.c:2051
+#, fuzzy
+msgid "Enter script file name: "
+msgstr "無法寫入指令稿檔案"
-#: disk-utils/fsck.cramfs.c:262
-msgid "crc error"
-msgstr "循環冗餘檢查錯誤"
+#: disk-utils/cfdisk.c:2022
+#, fuzzy
+msgid "The script file will be applied to in-memory partition table."
+msgstr "您將不能寫入分割表。\n"
-#: disk-utils/fsck.cramfs.c:323
-msgid "root inode is not directory"
-msgstr "根 inode 並非目錄"
+#: disk-utils/cfdisk.c:2031 disk-utils/cfdisk.c:2073
+#: disk-utils/fdisk-menu.c:481 disk-utils/fdisk-menu.c:525
+#, fuzzy, c-format
+msgid "Cannot open %s"
+msgstr "無法開啟 %s\n"
-#: disk-utils/fsck.cramfs.c:327
-#, c-format
-msgid "bad root offset (%lu)"
-msgstr "不當的根偏移 (%lu)"
+#: disk-utils/cfdisk.c:2033 disk-utils/fdisk-menu.c:483
+#, fuzzy, c-format
+msgid "Failed to parse script file %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
-#: disk-utils/fsck.cramfs.c:345
-msgid "data block too large"
-msgstr "資料區塊太大"
+#: disk-utils/cfdisk.c:2035 disk-utils/fdisk-menu.c:485
+#, fuzzy, c-format
+msgid "Failed to apply script %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
-#: disk-utils/fsck.cramfs.c:349
-#, c-format
-msgid "decompression error %p(%d): %s"
-msgstr "解壓縮錯誤 %p(%d)：%s"
+#: disk-utils/cfdisk.c:2052
+msgid "The current in-memory partition table will be dumped to the file."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:375
-#, c-format
-msgid " hole at %ld (%zd)\n"
-msgstr " 漏洞位於 %ld (%zd)\n"
+#: disk-utils/cfdisk.c:2060 disk-utils/fdisk-menu.c:513
+#, fuzzy
+msgid "Failed to allocate script handler"
+msgstr "配置迭代器時失敗"
-#: disk-utils/fsck.cramfs.c:382 disk-utils/fsck.cramfs.c:536
-#, c-format
-msgid " uncompressing block at %ld to %ld (%ld)\n"
-msgstr " 解壓縮區塊位於 %ld 到 %ld (%ld)\n"
+#: disk-utils/cfdisk.c:2066
+#, fuzzy
+msgid "Failed to read disk layout into script."
+msgstr "加入輸出列時失敗"
-#: disk-utils/fsck.cramfs.c:389
-#, c-format
-msgid "non-block (%ld) bytes"
-msgstr "非區塊 (%ld) 位元組"
+#: disk-utils/cfdisk.c:2080
+msgid "Disk layout successfully dumped."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:393
-#, c-format
-msgid "non-size (%ld vs %ld) bytes"
-msgstr "非大小 (%ld vs %ld) 位元組"
+#: disk-utils/cfdisk.c:2083 disk-utils/fdisk-menu.c:531
+#, fuzzy, c-format
+msgid "Failed to write script %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
-#: disk-utils/fsck.cramfs.c:399
-#, c-format
-msgid "write failed: %s"
-msgstr "寫入失敗：%s"
+#: disk-utils/cfdisk.c:2119
+#, fuzzy
+msgid "Select label type"
+msgstr "不合法的類型\n"
-#: disk-utils/fsck.cramfs.c:411
-#, c-format
-msgid "lchown failed: %s"
-msgstr "lchown 失敗：%s"
+#: disk-utils/cfdisk.c:2122 disk-utils/fdisk.c:1093 disk-utils/fdisk-menu.c:489
+#, fuzzy
+msgid "Device does not contain a recognized partition table."
+msgstr "裝置不包含辨識的分割表\n"
-#: disk-utils/fsck.cramfs.c:415
-#, c-format
-msgid "chown failed: %s"
-msgstr "chown 失敗：%s"
+#: disk-utils/cfdisk.c:2130
+msgid "Select a type to create a new label or press 'L' to load script file."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:420
-#, c-format
-msgid "utime failed: %s"
-msgstr "utime 失敗：%s"
+#: disk-utils/cfdisk.c:2179
+#, fuzzy
+msgid "This is cfdisk, a curses-based disk partitioning program."
+msgstr "本程式 cfdisk，是一個以游標操作為基礎的硬碟分割程式，"
-#: disk-utils/fsck.cramfs.c:432
-#, c-format
-msgid "directory inode has zero offset and non-zero size: %s"
-msgstr "目錄 inode 有零偏移值和非零大小：%s"
-
-#: disk-utils/fsck.cramfs.c:447
-#, c-format
-msgid "mkdir failed: %s"
-msgstr "mkdir 失敗：%s"
-
-#: disk-utils/fsck.cramfs.c:463
-msgid "filename length is zero"
-msgstr "檔名長度為零"
-
-#: disk-utils/fsck.cramfs.c:465
-msgid "bad filename length"
-msgstr "不當的檔名長度"
-
-#: disk-utils/fsck.cramfs.c:471
-msgid "bad inode offset"
-msgstr "不當的 inode 偏移值"
+#: disk-utils/cfdisk.c:2180
+#, fuzzy
+msgid "It lets you create, delete, and modify partitions on a block device."
+msgstr "可供您新增、刪除和修改硬碟中的分割區"
-#: disk-utils/fsck.cramfs.c:486
-msgid "file inode has zero offset and non-zero size"
-msgstr "æª\94æ¡\88 inode æ\9c\89é\9b¶å\81\8f移å\80¼å\92\8cé\9d\9eé\9b¶å¤§å°\8f"
+#: disk-utils/cfdisk.c:2182
+msgid "Command Meaning"
+msgstr "æ\8c\89é\8dµå\91½ä»¤ æ\84\8f義"
-#: disk-utils/fsck.cramfs.c:489
-msgid "file inode has zero size and non-zero offset"
-msgstr "檔案 inode 有零大小和非零偏移值"
+#: disk-utils/cfdisk.c:2183
+msgid "------- -------"
+msgstr "------- -------"
-#: disk-utils/fsck.cramfs.c:517
-msgid "symbolic link has zero offset"
-msgstr "符號連結有零偏移值"
+#: disk-utils/cfdisk.c:2184
+msgid " b Toggle bootable flag of the current partition"
+msgstr " b 切換目前分割區的開機屬性旗標"
-#: disk-utils/fsck.cramfs.c:519
-msgid "symbolic link has zero size"
-msgstr "符號連結有零大小"
+#: disk-utils/cfdisk.c:2185
+msgid " d Delete the current partition"
+msgstr " d 刪除目前的分割區"
-#: disk-utils/fsck.cramfs.c:528
-#, c-format
-msgid "size error in symlink: %s"
-msgstr "大小錯誤發生於符號連結：%s"
+#: disk-utils/cfdisk.c:2186
+msgid " h Print this screen"
+msgstr " h 顯示本說明畫面"
-#: disk-utils/fsck.cramfs.c:542
-#, c-format
-msgid "symlink failed: %s"
-msgstr "符號連結失敗：%s"
+#: disk-utils/cfdisk.c:2187
+msgid " n Create new partition from free space"
+msgstr " n 由剩餘空間中新增一塊分割區"
-#: disk-utils/fsck.cramfs.c:555
-#, c-format
-msgid "special file has non-zero offset: %s"
-msgstr "特殊檔案有非零偏移值：%s"
+#: disk-utils/cfdisk.c:2188
+msgid " q Quit program without writing partition table"
+msgstr " q 離開本程式並且不寫入分割表"
-#: disk-utils/fsck.cramfs.c:565
-#, c-format
-msgid "fifo has non-zero size: %s"
-msgstr "fifo 有非零大小：%s"
+#: disk-utils/cfdisk.c:2189
+msgid " s Fix partitions order (only when in disarray)"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:571
-#, c-format
-msgid "socket has non-zero size: %s"
-msgstr "通訊端有非零大小：%s"
+#: disk-utils/cfdisk.c:2190
+#, fuzzy
+msgid " t Change the partition type"
+msgstr " t 變更檔案系統的類型"
-#: disk-utils/fsck.cramfs.c:574
-#, c-format
-msgid "bogus mode: %s (%o)"
-msgstr "假造模式：%s (%o)"
+#: disk-utils/cfdisk.c:2191
+msgid " u Dump disk layout to sfdisk compatible script file"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:583
-#, c-format
-msgid "mknod failed: %s"
-msgstr "mknod 失敗：%s"
+#: disk-utils/cfdisk.c:2192
+#, fuzzy
+msgid " W Write partition table to disk (you must enter uppercase W);"
+msgstr " W 寫入分割表 (寫入一定要用大寫 W)"
-#: disk-utils/fsck.cramfs.c:615
-#, c-format
-msgid "directory data start (%ld) < sizeof(struct cramfs_super) + start (%ld)"
-msgstr "目錄資料起始 (%ld) < sizeof(struct cramfs_super) + 起始 (%ld)"
+#: disk-utils/cfdisk.c:2193
+#, fuzzy
+msgid " since this might destroy data on the disk, you must either"
+msgstr " 因為這將會使您的硬碟中的資料消失，您必須"
-#: disk-utils/fsck.cramfs.c:619
-#, c-format
-msgid "directory data end (%ld) != file data start (%ld)"
-msgstr "目錄資料結束 (%ld) != 檔案資料起始 (%ld)"
+#: disk-utils/cfdisk.c:2194
+#, fuzzy
+msgid " confirm or deny the write by entering 'yes' or 'no'"
+msgstr " 明確地回答 'yes' 代表寫入，若不要寫入請回答"
-#: disk-utils/fsck.cramfs.c:624
-msgid "invalid file data offset"
-msgstr "無效的檔案資料偏移值"
+#: disk-utils/cfdisk.c:2195
+#, fuzzy
+msgid " x Display/hide extra information about a partition"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: disk-utils/fsck.cramfs.c:659
-msgid "compiled without -x support"
-msgstr "編譯時不具 -x 支援"
+#: disk-utils/cfdisk.c:2196
+msgid "Up Arrow Move cursor to the previous partition"
+msgstr "向上鍵 移動往上鍵可移至上一個分割區"
-#: disk-utils/fsck.cramfs.c:677 fdisk/sfdisk.c:2855
-#, c-format
-msgid "%s: OK\n"
-msgstr "%s：確定\n"
+#: disk-utils/cfdisk.c:2197
+msgid "Down Arrow Move cursor to the next partition"
+msgstr "向下鍵 移動往下鍵可移至下一個分割區"
-#: disk-utils/fsck.minix.c:196
-#, c-format
-msgid "Usage: %s [-larvsmf] /dev/name\n"
-msgstr "用法：%s [-larvsmf] /dev/name\n"
+#: disk-utils/cfdisk.c:2198
+#, fuzzy
+msgid "Left Arrow Move cursor to the previous menu item"
+msgstr "向上鍵 移動往上鍵可移至上一個分割區"
-#: disk-utils/fsck.minix.c:293
-#, c-format
-msgid "%s is mounted.\t "
-msgstr "%s 已掛載。\t"
+#: disk-utils/cfdisk.c:2199
+#, fuzzy
+msgid "Right Arrow Move cursor to the next menu item"
+msgstr "向下鍵 移動往下鍵可移至下一個分割區"
-#: disk-utils/fsck.minix.c:295
-msgid "Do you really want to continue"
-msgstr "æ\82¨ç\9c\9fç\9a\84è¦\81ç¹¼çº\8cå\97\8eï¼\9f"
+#: disk-utils/cfdisk.c:2201
+msgid "Note: All of the commands can be entered with either upper or lower"
+msgstr "注æ\84\8f: 以ä¸\8aæ\89\80æ\9c\89ç\9a\84æ\8c\89é\8dµå\91½ä»¤å\9d\87ä¸\8då\8d\80å\88\86大å°\8f寫"
-#: disk-utils/fsck.minix.c:299
-#, c-format
-msgid "check aborted.\n"
-msgstr "已放棄檢查。\n"
+#: disk-utils/cfdisk.c:2202
+#, fuzzy
+msgid "case letters (except for Write)."
+msgstr "(除了 '寫入' 之外)。"
-#: disk-utils/fsck.minix.c:318 disk-utils/fsck.minix.c:341
-#, c-format
-msgid "Zone nr < FIRSTZONE in file `%s'."
-msgstr "區域 nr < 檔案「%s」中的 FIRSTZONE。"
+#: disk-utils/cfdisk.c:2204
+msgid "Use lsblk(8) or partx(8) to see more details about the device."
+msgstr ""
-#: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:345
-#, c-format
-msgid "Zone nr >= ZONES in file `%s'."
-msgstr "區域 nr >= 檔案「%s」中的 ZONES。"
+#: disk-utils/cfdisk.c:2214 disk-utils/cfdisk.c:2517
+#, fuzzy
+msgid "Press a key to continue."
+msgstr "按任何鍵繼續"
-#: disk-utils/fsck.minix.c:327 disk-utils/fsck.minix.c:350
-msgid "Remove block"
-msgstr "移除區塊"
+#: disk-utils/cfdisk.c:2300
+msgid "Could not toggle the flag."
+msgstr ""
-#: disk-utils/fsck.minix.c:368
-#, c-format
-msgid "Read error: unable to seek to block in file '%s'\n"
-msgstr "讀取錯誤：無法在檔案「%s」中搜尋到區塊\n"
+#: disk-utils/cfdisk.c:2310
+#, fuzzy, c-format
+msgid "Could not delete partition %zu."
+msgstr "已選分割區 %d\n"
-#: disk-utils/fsck.minix.c:374
-#, c-format
-msgid "Read error: bad block in file '%s'\n"
-msgstr "讀取錯誤：在檔案「%s」中有不良區塊\n"
+#: disk-utils/cfdisk.c:2312 disk-utils/fdisk-menu.c:662
+#, fuzzy, c-format
+msgid "Partition %zu has been deleted."
+msgstr "分割 %d 被刪除\n"
-#: disk-utils/fsck.minix.c:389
-#, c-format
-msgid ""
-"Internal error: trying to write bad block\n"
-"Write request ignored\n"
-msgstr ""
-"內部錯誤：嘗試寫入不良區塊\n"
-"寫入要求已忽略\n"
+#: disk-utils/cfdisk.c:2333
+#, fuzzy
+msgid "Partition size: "
+msgstr "分割區 (a-%c)："
-#: disk-utils/fsck.minix.c:395
-msgid "seek failed in write_block"
-msgstr "write_block 時搜尋失敗"
+#: disk-utils/cfdisk.c:2374
+#, fuzzy, c-format
+msgid "Changed type of partition %zu."
+msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n"
-#: disk-utils/fsck.minix.c:398
-#, c-format
-msgid "Write error: bad block in file '%s'\n"
-msgstr "寫å\85¥é\8c¯èª¤ï¼\9aå\9c¨æª\94æ¡\88ã\80\8c%sã\80\8dä¸æ\9c\89ä¸\8dè\89¯å\8d\80å¡\8a\n"
+#: disk-utils/cfdisk.c:2376
+#, fuzzy, c-format
+msgid "The type of partition %zu is unchanged."
+msgstr "å\88\86å\89²å\8d\80 %d ç\9a\84系統é¡\9eå\9e\8bæ\9cªè¢«è®\8aæ\9b´ï¼\9a%x (%s)\n"
-#: disk-utils/fsck.minix.c:514
-msgid "seek failed in write_super_block"
-msgstr "write_super_block 時搜尋失敗"
+#: disk-utils/cfdisk.c:2397
+#, fuzzy
+msgid "New size: "
+msgstr "新命令殼"
-#: disk-utils/fsck.minix.c:516
-msgid "unable to write super-block"
-msgstr "無法寫入 super-block"
+#: disk-utils/cfdisk.c:2412
+#, fuzzy, c-format
+msgid "Partition %zu resized."
+msgstr "%s：分割 #%d 移除\n"
-#: disk-utils/fsck.minix.c:529
-msgid "Unable to write inode map"
-msgstr "無法寫入 inode 對映"
+#: disk-utils/cfdisk.c:2430 disk-utils/cfdisk.c:2546 disk-utils/fdisk.c:1082
+#: disk-utils/fdisk-menu.c:592
+msgid "Device is open in read-only mode."
+msgstr ""
-#: disk-utils/fsck.minix.c:532
-msgid "Unable to write zone map"
-msgstr "無法寫入區域對映"
+#: disk-utils/cfdisk.c:2435
+#, fuzzy
+msgid "Are you sure you want to write the partition table to disk? "
+msgstr "您確定要將分割表寫入硬碟中嗎? (yes 或 no):"
-#: disk-utils/fsck.minix.c:535
-msgid "Unable to write inodes"
-msgstr "無法寫入 inodes"
+#: disk-utils/cfdisk.c:2437
+msgid "Type \"yes\" or \"no\", or press ESC to leave this dialog."
+msgstr ""
-#: disk-utils/fsck.minix.c:563
-msgid "seek failed"
-msgstr "搜尋失敗"
+#: disk-utils/cfdisk.c:2442 login-utils/lslogins.c:211 sys-utils/lscpu.c:1584
+#: sys-utils/lscpu.c:1594 sys-utils/lsmem.c:266
+msgid "yes"
+msgstr "是"
-#: disk-utils/fsck.minix.c:567
-msgid "unable to alloc buffer for superblock"
-msgstr "無法配置緩衝區給超區塊"
+#: disk-utils/cfdisk.c:2443
+#, fuzzy
+msgid "Did not write partition table to disk."
+msgstr "不要將分割表寫入硬碟"
-#: disk-utils/fsck.minix.c:570
-msgid "unable to read super block"
-msgstr "無法讀取超區塊"
+#: disk-utils/cfdisk.c:2448
+#, fuzzy
+msgid "Failed to write disklabel."
+msgstr "%s：無法寫入標籤"
-#: disk-utils/fsck.minix.c:588
-msgid "bad magic number in super-block"
-msgstr "超區塊中有不當的魔術數字"
+#: disk-utils/cfdisk.c:2454 disk-utils/fdisk-menu.c:599
+#, fuzzy
+msgid "The partition table has been altered."
+msgstr ""
+"分割表已變更！\n"
+"\n"
-#: disk-utils/fsck.minix.c:590
-msgid "Only 1k blocks/zones supported"
-msgstr "只有支援 1k 區塊/區域"
+#: disk-utils/cfdisk.c:2477 disk-utils/cfdisk.c:2548
+#, fuzzy
+msgid "Note that partition table entries are not in disk order now."
+msgstr ""
+"\n"
+"分割表項目未按磁碟排序\n"
-#: disk-utils/fsck.minix.c:592
-msgid "bad s_imap_blocks field in super-block"
-msgstr "超區塊中有不當的 s_imap_blocks 欄位"
+#: disk-utils/cfdisk.c:2514
+#, c-format
+msgid "Device already contains a %s signature; it will be removed by a write command."
+msgstr ""
-#: disk-utils/fsck.minix.c:594
-msgid "bad s_zmap_blocks field in super-block"
-msgstr "超區塊中有不當的 s_zmap_blocks 欄位"
+#: disk-utils/cfdisk.c:2525
+#, fuzzy
+msgid "failed to create a new disklabel"
+msgstr "建立新的清空 Sun disklabel"
-#: disk-utils/fsck.minix.c:610
-msgid "Unable to allocate buffer for inode map"
-msgstr "無法配置 inode 對映緩衝區"
+#: disk-utils/cfdisk.c:2533
+#, fuzzy
+msgid "failed to read partitions"
+msgstr "加入分割時失敗"
-#: disk-utils/fsck.minix.c:613
-msgid "Unable to allocate buffer for zone map"
-msgstr "無法配置區域對映緩衝區"
+#: disk-utils/cfdisk.c:2632
+#, fuzzy, c-format
+msgid " %1$s [options] <disk>\n"
+msgstr " %s [選項] <device>\n"
-#: disk-utils/fsck.minix.c:616
-msgid "Unable to allocate buffer for inodes"
-msgstr "無法配置 inodes 緩衝區"
+#: disk-utils/cfdisk.c:2635 disk-utils/fdisk.c:825 disk-utils/sfdisk.c:1919
+#, fuzzy
+msgid "Display or manipulate a disk partition table.\n"
+msgstr "%s：無法讀取分割表"
-#: disk-utils/fsck.minix.c:619
-msgid "Unable to allocate buffer for inode count"
-msgstr "無法配置 inode 計數緩衝區"
+#: disk-utils/cfdisk.c:2639
+#, fuzzy, c-format
+msgid " -L, --color[=<when>] colorize output (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.minix.c:622
-msgid "Unable to allocate buffer for zone count"
-msgstr "無法配置區域計數緩衝區"
+#: disk-utils/cfdisk.c:2642
+#, fuzzy
+msgid " -z, --zero start with zeroed partition table\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.minix.c:626
-msgid "Unable to read inode map"
-msgstr "無法讀取 inode 對映"
+#: disk-utils/cfdisk.c:2680 disk-utils/fdisk.c:970 disk-utils/sfdisk.c:2201
+#: misc-utils/cal.c:429 sys-utils/dmesg.c:1425 text-utils/hexdump.c:114
+#, fuzzy
+msgid "unsupported color mode"
+msgstr "不受支援的命令"
-#: disk-utils/fsck.minix.c:630
-msgid "Unable to read zone map"
-msgstr "無法讀取區域對映"
+#: disk-utils/cfdisk.c:2699 disk-utils/fdisk.c:908 disk-utils/sfdisk.c:227
+#, fuzzy
+msgid "failed to allocate libfdisk context"
+msgstr "配置迭代器時失敗"
-#: disk-utils/fsck.minix.c:634
-msgid "Unable to read inodes"
-msgstr "無法讀取 inodes"
+#: disk-utils/delpart.c:15
+#, fuzzy, c-format
+msgid " %s <disk device> <partition number>\n"
+msgstr " %s <disk device><分割區編號>\n"
-#: disk-utils/fsck.minix.c:636
-#, c-format
-msgid "Warning: Firstzone != Norm_firstzone\n"
-msgstr "警告：Firstzone != Norm_firstzone\n"
+#: disk-utils/delpart.c:19
+msgid "Tell the kernel to forget about a specified partition.\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:641
-#, c-format
-msgid "%ld inodes\n"
-msgstr "%ld inodes\n"
+#: disk-utils/delpart.c:62
+#, fuzzy
+msgid "failed to remove partition"
+msgstr "移除分割時失敗"
-#: disk-utils/fsck.minix.c:642
+#: disk-utils/fdformat.c:54
#, c-format
-msgid "%ld blocks\n"
-msgstr "%ld 區塊\n"
+msgid "Formatting ... "
+msgstr "格式化中…"
-#: disk-utils/fsck.minix.c:643 disk-utils/mkfs.minix.c:545
+#: disk-utils/fdformat.c:69 disk-utils/fdformat.c:139
#, c-format
-msgid "Firstdatazone=%ld (%ld)\n"
-msgstr "第一資料區=%ld (%ld)\n"
+msgid "done\n"
+msgstr "已完成\n"
-#: disk-utils/fsck.minix.c:644 disk-utils/mkfs.minix.c:546
+#: disk-utils/fdformat.c:81
#, c-format
-msgid "Zonesize=%d\n"
-msgstr "區域大小=%d\n"
+msgid "Verifying ... "
+msgstr "驗證中…"
-#: disk-utils/fsck.minix.c:645
-#, c-format
-msgid "Maxsize=%ld\n"
-msgstr "最大大小=%ld\n"
+#: disk-utils/fdformat.c:109
+msgid "Read: "
+msgstr "讀取："
-#: disk-utils/fsck.minix.c:646
-#, c-format
-msgid "Filesystem state=%d\n"
-msgstr "檔案系統狀態=%d\n"
+#: disk-utils/fdformat.c:111
+#, fuzzy, c-format
+msgid "Problem reading track/head %u/%u, expected %d, read %d\n"
+msgstr "問題發生在讀取第 %d 個磁柱時，預計資料為 %d，實際讀取資料為 %d\n"
-#: disk-utils/fsck.minix.c:647
+#: disk-utils/fdformat.c:128
#, fuzzy, c-format
msgid ""
-"namelen=%zd\n"
-"\n"
+"bad data in track/head %u/%u\n"
+"Continuing ... "
msgstr ""
-"名稱長度=%d\n"
-"\n"
+"第 %d 個磁柱有壞資料。\n"
+"繼續進行..."
-#: disk-utils/fsck.minix.c:662 disk-utils/fsck.minix.c:713
-#, c-format
-msgid "Inode %d marked unused, but used for file '%s'\n"
-msgstr "Inode %d 標記為未使用，但是卻用於檔案「%s」\n"
+#: disk-utils/fdformat.c:146 disk-utils/fsck.minix.c:183
+#: disk-utils/swaplabel.c:123 misc-utils/wipefs.c:641 sys-utils/blkdiscard.c:85
+#: sys-utils/tunelp.c:95
+#, fuzzy, c-format
+msgid " %s [options] <device>\n"
+msgstr " %s [選項] <device>\n"
-#: disk-utils/fsck.minix.c:666 disk-utils/fsck.minix.c:717
-msgid "Mark in use"
-msgstr "標記為使用中"
+#: disk-utils/fdformat.c:150
+msgid "Do a low-level formatting of a floppy disk.\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:688 disk-utils/fsck.minix.c:737
-#, c-format
-msgid "The file `%s' has mode %05o\n"
-msgstr "檔案「%s」具有模式 %05o\n"
+#: disk-utils/fdformat.c:153
+#, fuzzy
+msgid " -f, --from <N> start at the track N (default 0)\n"
+msgstr " -a, --all 所有 (預設)\n"
-#: disk-utils/fsck.minix.c:695 disk-utils/fsck.minix.c:743
-#, c-format
-msgid "Warning: inode count too big.\n"
-msgstr "警告：inode 數量太大。\n"
+#: disk-utils/fdformat.c:154
+#, fuzzy
+msgid " -t, --to <N> stop at the track N\n"
+msgstr " -2, --twostopbits 設定停止位元到兩\n"
-#: disk-utils/fsck.minix.c:755 disk-utils/fsck.minix.c:763
-msgid "root inode isn't a directory"
-msgstr "根 inode 並非目錄"
+#: disk-utils/fdformat.c:155
+msgid ""
+" -r, --repair <N> try to repair tracks failed during\n"
+" the verification (max N retries)\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:775 disk-utils/fsck.minix.c:806
-#, c-format
-msgid "Block has been used before. Now in file `%s'."
-msgstr "區塊於之前已使用。現在屬於檔案「%s」。"
+#: disk-utils/fdformat.c:157
+msgid " -n, --no-verify disable the verification after the format\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:777 disk-utils/fsck.minix.c:808
-#: disk-utils/fsck.minix.c:1131 disk-utils/fsck.minix.c:1141
-#: disk-utils/fsck.minix.c:1187 disk-utils/fsck.minix.c:1196
-msgid "Clear"
-msgstr "清除"
+#: disk-utils/fdformat.c:195
+#, fuzzy
+msgid "invalid argument - from"
+msgstr "無效的引數：%s"
-#: disk-utils/fsck.minix.c:787 disk-utils/fsck.minix.c:818
-#, c-format
-msgid "Block %d in file `%s' is marked not in use."
-msgstr "檔案「%2$s」中的 區塊 %1$d 已標記為未被使用。"
+#: disk-utils/fdformat.c:199
+#, fuzzy
+msgid "invalid argument - to"
+msgstr "無效的引數：%s"
-#: disk-utils/fsck.minix.c:789 disk-utils/fsck.minix.c:820
-msgid "Correct"
-msgstr "修正"
+#: disk-utils/fdformat.c:202
+#, fuzzy
+msgid "invalid argument - repair"
+msgstr "無效的引數：%s"
-#: disk-utils/fsck.minix.c:959 disk-utils/fsck.minix.c:1026
-#, c-format
-msgid "The directory '%s' contains a bad inode number for file '%.*s'."
-msgstr "目錄「%s」含有不當的 inode 編號於檔案「%.*s」。"
+#: disk-utils/fdformat.c:223 disk-utils/fsck.cramfs.c:148
+#: disk-utils/mkfs.bfs.c:182 disk-utils/mkfs.cramfs.c:337
+#: disk-utils/mkfs.cramfs.c:758 disk-utils/mkfs.cramfs.c:796
+#: disk-utils/mkfs.minix.c:820 disk-utils/mkswap.c:243 disk-utils/partx.c:957
+#: login-utils/last.c:681 login-utils/utmpdump.c:137 misc-utils/namei.c:135
+#: misc-utils/rename.c:120 sys-utils/blkdiscard.c:184 sys-utils/blkzone.c:99
+#: sys-utils/dmesg.c:529 sys-utils/fallocate.c:198 sys-utils/fsfreeze.c:119
+#: sys-utils/fstrim.c:74 sys-utils/nsenter.c:164 sys-utils/nsenter.c:168
+#: sys-utils/swapon.c:523 sys-utils/switch_root.c:94
+#: sys-utils/switch_root.c:137 term-utils/mesg.c:145 text-utils/more.c:350
+#, fuzzy, c-format
+msgid "stat of %s failed"
+msgstr "stat 失敗"
-#: disk-utils/fsck.minix.c:962 disk-utils/fsck.minix.c:1029
-msgid " Remove"
-msgstr " 移除"
+#: disk-utils/fdformat.c:226 disk-utils/partx.c:1016 misc-utils/lsblk.c:1437
+#: sys-utils/blkdiscard.c:186 sys-utils/blkzone.c:101
+#: sys-utils/mountpoint.c:107
+#, fuzzy, c-format
+msgid "%s: not a block device"
+msgstr "%s：不是區塊裝置"
-#: disk-utils/fsck.minix.c:976 disk-utils/fsck.minix.c:1043
-#, c-format
-msgid "%s: bad directory: '.' isn't first\n"
-msgstr "%s：不當的目錄：「.」不是第一個\n"
+#: disk-utils/fdformat.c:231
+#, fuzzy
+msgid "could not determine current format type"
+msgstr "無法決定目前的格式類型"
-#: disk-utils/fsck.minix.c:984 disk-utils/fsck.minix.c:1052
+#: disk-utils/fdformat.c:233
#, c-format
-msgid "%s: bad directory: '..' isn't second\n"
-msgstr "%s：不當的目錄：「..」不是第二個\n"
+msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
+msgstr "%s面、%d 磁軌、%d 磁區/磁軌。總容量 %d kB。\n"
-#: disk-utils/fsck.minix.c:1086 disk-utils/fsck.minix.c:1104
-msgid "internal error"
-msgstr "內部錯誤"
+#: disk-utils/fdformat.c:234
+msgid "Double"
+msgstr "雙"
-#: disk-utils/fsck.minix.c:1089 disk-utils/fsck.minix.c:1107
-#, c-format
-msgid "%s: bad directory: size < 32"
-msgstr "%s：不當的目錄：大小 < 32"
+#: disk-utils/fdformat.c:234
+msgid "Single"
+msgstr "單"
-#: disk-utils/fsck.minix.c:1120
-msgid "seek failed in bad_zone"
-msgstr "在損毀區域中搜尋失敗"
+#: disk-utils/fdformat.c:241
+msgid "user defined start track exceeds the medium specific maximum"
+msgstr ""
-#: disk-utils/fsck.minix.c:1130 disk-utils/fsck.minix.c:1186
-#, fuzzy, c-format
-msgid "Inode %lu mode not cleared."
-msgstr "Inode %d 模式無法清空。"
+#: disk-utils/fdformat.c:243
+msgid "user defined end track exceeds the medium specific maximum"
+msgstr ""
+
+#: disk-utils/fdformat.c:245
+msgid "user defined start track exceeds the user defined end track"
+msgstr ""
+
+#: disk-utils/fdformat.c:253 misc-utils/logger.c:1045
+#, fuzzy
+msgid "close failed"
+msgstr "搜尋失敗"
-#: disk-utils/fsck.minix.c:1139 disk-utils/fsck.minix.c:1195
+#: disk-utils/fdisk.c:206
#, fuzzy, c-format
-msgid "Inode %lu not used, marked used in the bitmap."
-msgstr "Inode %d 未被使用，在點陣圖中標記為使用。"
+msgid "Select (default %c): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:1146 disk-utils/fsck.minix.c:1201
+#: disk-utils/fdisk.c:211
#, fuzzy, c-format
-msgid "Inode %lu used, marked unused in the bitmap."
-msgstr "Inode %d 已使用，在點陣圖中標記為未使用。"
+msgid "Using default response %c."
+msgstr "使用預設回應 %c\n"
-#: disk-utils/fsck.minix.c:1148 disk-utils/fsck.minix.c:1202
-msgid "Set"
-msgstr "設定"
+#: disk-utils/fdisk.c:224 disk-utils/fdisk.c:298 disk-utils/fdisk.c:375
+#: libfdisk/src/dos.c:1287 libfdisk/src/gpt.c:2341
+#, fuzzy
+msgid "Value out of range."
+msgstr "數值超出範圍。\n"
-#: disk-utils/fsck.minix.c:1152 disk-utils/fsck.minix.c:1206
+#: disk-utils/fdisk.c:253
#, fuzzy, c-format
-msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
-msgstr "Inode %d (模式 = %07o)，i_nlinks=%d，數量=%d。"
+msgid "%s (%s, default %c): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:1154 disk-utils/fsck.minix.c:1208
-msgid "Set i_nlinks to count"
-msgstr "設定 in_links 加入計數"
+#: disk-utils/fdisk.c:256 disk-utils/fdisk.c:323
+#, fuzzy, c-format
+msgid "%s (%s, default %<PRIu64>): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:1166 disk-utils/fsck.minix.c:1220
+#: disk-utils/fdisk.c:261
#, fuzzy, c-format
-msgid "Zone %lu: marked in use, no file uses it."
-msgstr "區域 %d: 標記為使用中，但無檔案使用它。"
+msgid "%s (%c-%c, default %c): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:1167 disk-utils/fsck.minix.c:1222
-msgid "Unmark"
-msgstr "取消標記"
+#: disk-utils/fdisk.c:265 disk-utils/fdisk.c:327
+#, fuzzy, c-format
+msgid "%s (%<PRIu64>-%<PRIu64>, default %<PRIu64>): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:1172 disk-utils/fsck.minix.c:1227
+#: disk-utils/fdisk.c:268
#, fuzzy, c-format
-msgid "Zone %lu: in use, counted=%d\n"
-msgstr "區域 %d: 使用中，數量=%d\n"
+msgid "%s (%c-%c): "
+msgstr "%s (%s)\n"
-#: disk-utils/fsck.minix.c:1175 disk-utils/fsck.minix.c:1230
+#: disk-utils/fdisk.c:271 disk-utils/fdisk.c:330
#, fuzzy, c-format
-msgid "Zone %lu: not in use, counted=%d\n"
-msgstr "區域 %d: 未被使用，數量=%d\n"
+msgid "%s (%<PRIu64>-%<PRIu64>): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:1275
-msgid "bad inode size"
-msgstr "不當的 inode 大小"
+#: disk-utils/fdisk.c:442 disk-utils/sfdisk.c:201
+msgid " [Y]es/[N]o: "
+msgstr ""
-#: disk-utils/fsck.minix.c:1277
-msgid "bad v2 inode size"
-msgstr "不當的 v2 inode 大小"
+#: disk-utils/fdisk.c:484
+#, fuzzy
+msgid "Hex code (type L to list all codes): "
+msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-#: disk-utils/fsck.minix.c:1303
-msgid "need terminal for interactive repairs"
-msgstr "需要終端機以進行互動式修復"
+#: disk-utils/fdisk.c:485
+#, fuzzy
+msgid "Partition type (type L to list all types): "
+msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-#: disk-utils/fsck.minix.c:1307
+#: disk-utils/fdisk.c:502
#, fuzzy, c-format
-msgid "unable to open '%s': %m"
-msgstr "無法開啟「%s」：%s"
+msgid "Failed to parse '%s' partition type."
+msgstr "剖析機能『%s 時失敗』"
-#: disk-utils/fsck.minix.c:1322
-#, c-format
-msgid "%s is clean, no check.\n"
-msgstr "%s 已清除，不做檢查。\n"
+#: disk-utils/fdisk.c:595
+#, fuzzy
+msgid "DOS Compatibility flag is set (DEPRECATED!)"
+msgstr "DOS 相容性旗標已設定 (不宜再用！)\n"
-#: disk-utils/fsck.minix.c:1326
-#, c-format
-msgid "Forcing filesystem check on %s.\n"
-msgstr "強制檢查 %s 檔案系統。\n"
+#: disk-utils/fdisk.c:596
+#, fuzzy
+msgid "DOS Compatibility flag is not set"
+msgstr "DOS 相容性旗標未設定\n"
-#: disk-utils/fsck.minix.c:1328
-#, c-format
-msgid "Filesystem on %s is dirty, needs checking.\n"
-msgstr "%s 檔案系統不乾淨，需要檢查。\n"
+#: disk-utils/fdisk.c:618 disk-utils/fdisk.c:656
+#, fuzzy, c-format
+msgid "Partition %zu does not exist yet!"
+msgstr "分割區 %d 尚不存在！\n"
-#: disk-utils/fsck.minix.c:1361
-#, c-format
-msgid ""
-"\n"
-"%6ld inodes used (%ld%%)\n"
-msgstr ""
-"\n"
-"%6ld inodes 已使用 (%ld%%)\n"
+#: disk-utils/fdisk.c:623 disk-utils/fdisk.c:634 libfdisk/src/ask.c:1028
+msgid "Unknown"
+msgstr "未知"
-#: disk-utils/fsck.minix.c:1366
-#, c-format
-msgid "%6ld zones used (%ld%%)\n"
-msgstr "%6ld 區域已使用 (%ld%%)\n"
+#: disk-utils/fdisk.c:633
+#, fuzzy, c-format
+msgid "Changed type of partition '%s' to '%s'."
+msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n"
+
+#: disk-utils/fdisk.c:637
+#, fuzzy, c-format
+msgid "Type of partition %zu is unchanged: %s."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: disk-utils/fsck.minix.c:1368
+#: disk-utils/fdisk.c:733
#, c-format
msgid ""
"\n"
-"%6d regular files\n"
-"%6d directories\n"
-"%6d character device files\n"
-"%6d block device files\n"
-"%6d links\n"
-"%6d symbolic links\n"
-"------\n"
-"%6d files\n"
+"%s: offset = %<PRIu64>, size = %zu bytes."
msgstr ""
-"\n"
-"%6d 標準檔案\n"
-"%6d 目錄\n"
-"%6d 字元裝置檔案\n"
-"%6d 區塊裝置檔案\n"
-"%6d 鏈結\n"
-"%6d 符號連結\n"
-"------\n"
-"%6d 檔案\n"
-#: disk-utils/fsck.minix.c:1381
-#, c-format
-msgid ""
-"----------------------------\n"
-"FILE SYSTEM HAS BEEN CHANGED\n"
-"----------------------------\n"
-msgstr ""
-"----------------------------\n"
-"檔案系統已變更\n"
-"----------------------------\n"
+#: disk-utils/fdisk.c:739
+#, fuzzy
+msgid "cannot seek"
+msgstr "無法衍生執行"
-#: disk-utils/isosize.c:125
-#, fuzzy, c-format
-msgid "failed to open %s"
-msgstr "%s：開啟失敗：%s\n"
+#: disk-utils/fdisk.c:744
+#, fuzzy
+msgid "cannot read"
+msgstr "無法讀取 %s"
-#: disk-utils/isosize.c:128
-#, fuzzy, c-format
-msgid "seek error on %s"
-msgstr "%s：於 %s 尋找錯誤\n"
+#: disk-utils/fdisk.c:757 libfdisk/src/bsd.c:258 libfdisk/src/dos.c:948
+#: libfdisk/src/gpt.c:2269
+#, fuzzy
+msgid "First sector"
+msgstr "起初 %s"
-#: disk-utils/isosize.c:131
+#: disk-utils/fdisk.c:784
#, fuzzy, c-format
-msgid "read error on %s"
-msgstr "%s：於 %s 讀取錯誤\n"
+msgid "BLKGETSIZE ioctl failed on %s"
+msgstr "BLKGETSIZE ioctl 失敗的於 %s"
-#: disk-utils/isosize.c:138
+#: disk-utils/fdisk.c:802
#, c-format
-msgid "sector count: %d, sector size: %d\n"
-msgstr "磁區數量：%d, 磁區大小：%d\n"
+msgid "The device contains '%s' signature and it will be removed by a write command. See fdisk(8) man page and --wipe option for more details."
+msgstr ""
-#: disk-utils/isosize.c:155
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] iso9660_image_file\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: disk-utils/fdisk.c:807
+#, c-format
+msgid "The device contains '%s' signature and it may remain on the device. It is recommended to wipe the device with wipefs(8) or fdisk --wipe, in order to avoid possible collisions."
+msgstr ""
-#: disk-utils/isosize.c:159
+#: disk-utils/fdisk.c:820
#, c-format
msgid ""
-"\n"
-"Options:\n"
-" -d, --divisor=NUM devide bytes NUM\n"
-" -x, --sectors show sector count and size\n"
-" -V, --version output version information and exit\n"
-" -H, --help display this help and exit\n"
-"\n"
+" %1$s [options] <disk> change partition table\n"
+" %1$s [options] -l [<disk>] list partition table(s)\n"
msgstr ""
-#: disk-utils/isosize.c:190
-msgid "invalid divisor argument"
-msgstr ""
+#: disk-utils/fdisk.c:828
+#, fuzzy
+msgid " -b, --sector-size <size> physical and logical sector size\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: disk-utils/mkfs.bfs.c:70
-#, fuzzy, c-format
-msgid "Usage: %s [options] device [block-count]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: disk-utils/fdisk.c:829
+msgid " -B, --protect-boot don't erase bootbits when creating a new label\n"
+msgstr ""
-#: disk-utils/mkfs.bfs.c:72
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -N, --inodes=NUM specify desired number of inodes\n"
-" -V, --vname=NAME specify volume name\n"
-" -F, --fname=NAME specify file system name\n"
-" -v, --verbose explain what is being done\n"
-" -c this option is silently ignored\n"
-" -l this option is silently ignored\n"
-" -V, --version output version information and exit\n"
-" -V as version must be only option\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: disk-utils/fdisk.c:830
+msgid " -c, --compatibility[=<mode>] mode is 'dos' or 'nondos' (default)\n"
msgstr ""
-#: disk-utils/mkfs.bfs.c:134
+#: disk-utils/fdisk.c:832
+#, fuzzy, c-format
+msgid " -L, --color[=<when>] colorize output (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: disk-utils/fdisk.c:835
#, fuzzy
-msgid "invalid number of inodes"
-msgstr "無效的列數"
+msgid " -l, --list display partitions and exit\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: disk-utils/mkfs.bfs.c:140
-msgid "volume name too long"
-msgstr "卷冊名稱太長"
+#: disk-utils/fdisk.c:836
+#, fuzzy
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: disk-utils/mkfs.bfs.c:147
-msgid "fsname name too long"
-msgstr "檔案系統名稱太長"
+#: disk-utils/fdisk.c:837
+#, fuzzy
+msgid " -t, --type <type> recognize specified partition table type only\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: disk-utils/mkfs.bfs.c:175
-#, c-format
-msgid "cannot stat device %s"
-msgstr "無法識別裝置狀態 %s"
+#: disk-utils/fdisk.c:838
+msgid " -u, --units[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
+msgstr ""
-#: disk-utils/mkfs.bfs.c:178
-#, c-format
-msgid "%s is not a block special device"
-msgstr "%s 並非區塊特殊裝置"
+#: disk-utils/fdisk.c:839
+#, fuzzy
+msgid " -s, --getsz display device size in 512-byte sectors [DEPRECATED]\n"
+msgstr " -G, --get-glush 顯示預設清理逾時值\n"
-#: disk-utils/mkfs.bfs.c:186
+#: disk-utils/fdisk.c:840
#, fuzzy
-msgid "invalid block-count"
-msgstr "無效的選項"
+msgid " --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: disk-utils/mkfs.bfs.c:192
-#, c-format
-msgid "cannot get size of %s"
-msgstr "無法取得 %s 的大小"
+#: disk-utils/fdisk.c:842
+#, fuzzy, c-format
+msgid " -w, --wipe <mode> wipe signatures (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/mkfs.bfs.c:197
-#, c-format
-msgid "blocks argument too large, max is %llu"
-msgstr "區塊引數太大，最大是 %llu"
+#: disk-utils/fdisk.c:844 disk-utils/sfdisk.c:1966
+#, fuzzy, c-format
+msgid " -W, --wipe-partitions <mode> wipe signatures from new partitions (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/mkfs.bfs.c:212
-msgid "too many inodes - max is 512"
-msgstr "太多 inodes - 最大為 512"
+#: disk-utils/fdisk.c:847
+#, fuzzy
+msgid " -C, --cylinders <number> specify the number of cylinders\n"
+msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
-#: disk-utils/mkfs.bfs.c:222
-#, c-format
-msgid "not enough space, need at least %llu blocks"
-msgstr "沒有足夠的空間，需要至少 %llu 區塊"
+#: disk-utils/fdisk.c:848
+#, fuzzy
+msgid " -H, --heads <number> specify the number of heads\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
-#: disk-utils/mkfs.bfs.c:234 fdisk/fdisk.c:2600
-#, c-format
-msgid "Device: %s\n"
-msgstr "裝置：%s\n"
+#: disk-utils/fdisk.c:849
+#, fuzzy
+msgid " -S, --sectors <number> specify the number of sectors per track\n"
+msgstr " -S# [或 --sectors #]： 設定要用的磁區數量"
-#: disk-utils/mkfs.bfs.c:235
-#, c-format
-msgid "Volume: <%-6s>\n"
-msgstr "卷冊：<%-6s>\n"
+#: disk-utils/fdisk.c:918 disk-utils/fdisk.c:920 disk-utils/partx.c:880
+#, fuzzy
+msgid "invalid sector size argument"
+msgstr "無效的磁區大小引數"
-#: disk-utils/mkfs.bfs.c:236
-#, c-format
-msgid "FSname: <%-6s>\n"
-msgstr "檔案系統名稱：<%-6s>\n"
+#: disk-utils/fdisk.c:930
+#, fuzzy
+msgid "invalid cylinders argument"
+msgstr "無效的磁柱引數"
-#: disk-utils/mkfs.bfs.c:237
-#, c-format
-msgid "BlockSize: %d\n"
-msgstr "區塊大小：%d\n"
+#: disk-utils/fdisk.c:942
+#, fuzzy
+msgid "not found DOS label driver"
+msgstr "找不到未使用的裝置"
-#: disk-utils/mkfs.bfs.c:239
+#: disk-utils/fdisk.c:948
#, fuzzy, c-format
-msgid "Inodes: %lu (in 1 block)\n"
-msgstr "Inodes：%d (在 1 個區塊中)\n"
+msgid "unknown compatibility mode '%s'"
+msgstr "不明機能『%s』"
-#: disk-utils/mkfs.bfs.c:242
-#, fuzzy, c-format
-msgid "Inodes: %lu (in %llu blocks)\n"
-msgstr "Inodes：%d (在 %lld 個區塊中)\n"
+#: disk-utils/fdisk.c:955
+#, fuzzy
+msgid "invalid heads argument"
+msgstr "無效的前端引數"
-#: disk-utils/mkfs.bfs.c:244
-#, c-format
-msgid "Blocks: %lld\n"
-msgstr "區塊：%lld\n"
-
-#: disk-utils/mkfs.bfs.c:245
-#, c-format
-msgid "Inode end: %d, Data end: %d\n"
-msgstr "Inode 結束：%d, 資料結束：%d\n"
-
-#: disk-utils/mkfs.bfs.c:250
-msgid "error writing superblock"
-msgstr "寫入超區塊時發生錯誤"
+#: disk-utils/fdisk.c:961
+#, fuzzy
+msgid "invalid sectors argument"
+msgstr "無效的磁區引數"
-#: disk-utils/mkfs.bfs.c:270
-msgid "error writing root inode"
-msgstr "寫入根 inode 時發生錯誤"
+#: disk-utils/fdisk.c:987
+#, fuzzy, c-format
+msgid "unsupported disklabel: %s"
+msgstr "不受支援的引數：%s"
-#: disk-utils/mkfs.bfs.c:275
-msgid "error writing inode"
-msgstr "寫入 inode 時發生錯誤"
+#: disk-utils/fdisk.c:995
+#, fuzzy
+msgid "unsupported unit"
+msgstr "不受支援的引數：%s"
-#: disk-utils/mkfs.bfs.c:278
-msgid "seek error"
-msgstr "尋找錯誤"
+#: disk-utils/fdisk.c:1003 disk-utils/fdisk.c:1008 disk-utils/sfdisk.c:2165
+#: disk-utils/sfdisk.c:2170
+#, fuzzy
+msgid "unsupported wipe mode"
+msgstr "不受支援的命令"
-#: disk-utils/mkfs.bfs.c:284
-msgid "error writing . entry"
-msgstr "寫入 . 項目時發生錯誤"
+#: disk-utils/fdisk.c:1021
+#, fuzzy
+msgid "The device properties (sector size and geometry) should be used with one specified device only."
+msgstr "警告：-b (設定磁區大小) 選項應該與一個指定裝置共同使用\n"
-#: disk-utils/mkfs.bfs.c:288
-msgid "error writing .. entry"
-msgstr "寫入 .. 項目時發生錯誤"
+#: disk-utils/fdisk.c:1052 disk-utils/fdisk.c:1067 disk-utils/fsck.cramfs.c:693
+#: disk-utils/mkfs.bfs.c:192 disk-utils/mkfs.cramfs.c:786
+#: disk-utils/partx.c:973 disk-utils/raw.c:136 disk-utils/raw.c:149
+#: disk-utils/raw.c:161 disk-utils/raw.c:202 misc-utils/cal.c:519
+#: misc-utils/findfs.c:58 misc-utils/look.c:149 misc-utils/whereis.c:586
+#: misc-utils/whereis.c:597 misc-utils/whereis.c:608 misc-utils/whereis.c:650
+#: schedutils/chrt.c:504 schedutils/ionice.c:262 schedutils/taskset.c:188
+#: sys-utils/chcpu.c:355 sys-utils/chmem.c:422 sys-utils/dmesg.c:1489
+#: sys-utils/ipcmk.c:134 sys-utils/ldattach.c:321 sys-utils/losetup.c:913
+#: sys-utils/lscpu.c:2391 sys-utils/lsmem.c:631 sys-utils/mount.c:812
+#: sys-utils/mount.c:820 sys-utils/mount.c:867 sys-utils/mount.c:880
+#: sys-utils/mount.c:952 sys-utils/mountpoint.c:189 sys-utils/pivot_root.c:71
+#: sys-utils/swapoff.c:229 sys-utils/swapon.c:993 sys-utils/switch_root.c:249
+#: sys-utils/umount.c:596 term-utils/setterm.c:1200 text-utils/col.c:233
+#: text-utils/more.c:1986
+#, fuzzy
+msgid "bad usage"
+msgstr "不當的值"
-#: disk-utils/mkfs.bfs.c:291
+#: disk-utils/fdisk.c:1073
#, c-format
-msgid "error closing %s"
-msgstr "關閉 %s 時發生錯誤"
-
-#: disk-utils/mkfs.c:38
-#, fuzzy, c-format
-msgid "Usage: %s [options] [-t type fs-options] device [size]\n"
-msgstr "用法：mkfs [-V] [-t 檔案系統類型] [檔案系統選項] 裝置 [大小]\n"
+msgid "Welcome to fdisk (%s)."
+msgstr ""
-#: disk-utils/mkfs.c:41
-#, c-format
+#: disk-utils/fdisk.c:1075 disk-utils/sfdisk.c:1692
+#, fuzzy
msgid ""
+"Changes will remain in memory only, until you decide to write them.\n"
+"Be careful before using the write command.\n"
+msgstr ""
+"歡迎使用 fdisk (%s)。\n"
"\n"
-"Options:\n"
-" -t, --type=TYPE file system type, when undefined ext2 is used\n"
-" fs-options parameters to real file system builder\n"
-" device path to a device\n"
-" size number of blocks on the device\n"
-" -V, --verbose explain what is done\n"
-" defining -V more than once will cause a dry-run\n"
-" -V, --version output version information and exit\n"
-" -V as version must be only option\n"
-" -h, --help display this help and exit\n"
+"變更將剩下在中記憶體只有，直到您決定到寫入它們。\n"
+"請小心之前使用寫入命令。\n"
+"\n"
+
+#: disk-utils/fdisk.c:1098
+msgid "A hybrid GPT was detected. You have to sync the hybrid MBR manually (expert command 'M')."
msgstr ""
-#: disk-utils/mkfs.c:52
+#: disk-utils/fdisk-list.c:43
#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see mkfs(8).\n"
+msgid "Disklabel type: %s"
+msgstr "硬碟: %s\n"
+
+#: disk-utils/fdisk-list.c:47
+#, fuzzy, c-format
+msgid "Disk identifier: %s"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: disk-utils/fdisk-list.c:61
+#, fuzzy, c-format
+msgid "Disk %s: %s, %ju bytes, %ju sectors"
msgstr ""
"\n"
-"要獲得更多資訊請參看 wipefs(8)。\n"
-
-#: disk-utils/mkfs.c:129
-#, c-format
-msgid "mkfs (%s)\n"
-msgstr "mkfs (%s)\n"
+"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: disk-utils/mkfs.cramfs.c:125
-#, c-format
-msgid ""
-"usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n "
-"name] dirname outfile\n"
-" -h print this help\n"
-" -v be verbose\n"
-" -E make all warnings errors (non-zero exit status)\n"
-" -b blksize use this blocksize, must equal page size\n"
-" -e edition set edition number (part of fsid)\n"
-" -N endian set cramfs endianness (big|little|host), default host\n"
-" -i file insert a file image into the filesystem (requires >= 2.4.0)\n"
-" -n name set name of cramfs filesystem\n"
-" -p pad by %d bytes for boot code\n"
-" -s sort directory entries (old option, ignored)\n"
-" -z make explicit holes (requires >= 2.3.39)\n"
-" dirname root of the filesystem to be compressed\n"
-" outfile output file\n"
-msgstr ""
-"用法：%s [-h] [-v] [-b 區塊大小] [-e 編次] [-N 尾序] [-i 檔案] [-n 名稱] "
-"dirname outfile\n"
-" -h 印出這個說明\n"
-" -v 詳細訊息\n"
-" -E 所有警告視為錯誤 (非零結束狀態)\n"
-" -b 區塊大小 使用這個區塊大小，必須等於頁面大小\n"
-" -e 編次 設定編次數字 (部分的 fsid)\n"
-" -N 尾序 設定 cramfs 尾序 (大|小|主機)，預設依主機\n"
-" -i 檔案 插入檔案影像到檔案系統 (需求 >= 2.4.0)\n"
-" -n 名稱 設定 cramfs 檔案系統的名稱\n"
-" -p 填充 %d 位元組於開機碼\n"
-" -s 排序目錄項目 (舊選項，忽略)\n"
-" -z 製作明確的空洞 (需求 >= 2.3.39)\n"
-" dirname 壓縮的檔案系統根目錄\n"
-" outfile 輸出檔案\n"
-
-#: disk-utils/mkfs.cramfs.c:298
+#: disk-utils/fdisk-list.c:68
#, fuzzy, c-format
-msgid "could not read directory %s"
-msgstr "%s：並非目錄"
+msgid "Disk model: %s"
+msgstr "磁碟：%.*s\n"
-#: disk-utils/mkfs.cramfs.c:323
+#: disk-utils/fdisk-list.c:71
#, fuzzy, c-format
-msgid ""
-"Very long (%zu bytes) filename `%s' found.\n"
-" Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting."
-msgstr ""
-"找到很長 (%zu 位元組) 的檔名「%s」。\n"
-"請在 mkcramfs.c 中增加 MAX_INPUT_NAMELEN 並重新編譯。離開。\n"
+msgid "Geometry: %d heads, %llu sectors/track, %llu cylinders"
+msgstr "%d 前端，%llu 磁區/軌段，%llu 磁柱\n"
-#: disk-utils/mkfs.cramfs.c:445
-#, fuzzy
-msgid "filesystem too big. Exiting."
-msgstr "檔案系統太大。離開。\n"
+#: disk-utils/fdisk-list.c:76 disk-utils/fdisk-list.c:298
+#, fuzzy, c-format
+msgid "Units: %s of %d * %ld = %ld bytes"
+msgstr "單位=%s 的 %d * %ld=%ld 位元組\n"
-#: disk-utils/mkfs.cramfs.c:604
-#, c-format
-msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
-msgstr "AIEEE：區塊「被壓縮」到 > 2*區塊長度 (%ld)\n"
+#: disk-utils/fdisk-list.c:82 disk-utils/fdisk-list.c:304
+#, fuzzy, c-format
+msgid "Sector size (logical/physical): %lu bytes / %lu bytes"
+msgstr "磁區大小 (邏輯的/實體)：%lu 位元組/%lu 位元組\n"
-#: disk-utils/mkfs.cramfs.c:623
-#, c-format
-msgid "%6.2f%% (%+ld bytes)\t%s\n"
-msgstr "%6.2f%% (%+ld 位元組)\t%s\n"
+#: disk-utils/fdisk-list.c:85
+#, fuzzy, c-format
+msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes"
+msgstr "I/O 大小 (最小/最佳化)：%lu 位元組 / %lu 位元組\n"
-#: disk-utils/mkfs.cramfs.c:668
+#: disk-utils/fdisk-list.c:89
#, fuzzy, c-format
-msgid "cannot close file %s"
-msgstr "無法開啟檔案 '%s'"
+msgid "Alignment offset: %lu bytes"
+msgstr "對齊偏移值：%lu 位元組\n"
-#: disk-utils/mkfs.cramfs.c:730
+#: disk-utils/fdisk-list.c:120 disk-utils/fdisk-list.c:240
+#: disk-utils/fsck.c:1255
#, fuzzy
-msgid "failed to parse blocksize argument"
-msgstr "剖析 pid 時失敗"
+msgid "failed to allocate iterator"
+msgstr "配置迭代器時失敗"
-#: disk-utils/mkfs.cramfs.c:733
+#: disk-utils/fdisk-list.c:126 disk-utils/fdisk-list.c:246
+#: disk-utils/partx.c:667 login-utils/lslogins.c:1013 misc-utils/fincore.c:356
+#: misc-utils/findmnt.c:1625 misc-utils/lsblk.c:2071 misc-utils/lslocks.c:456
+#: misc-utils/uuidparse.c:252 misc-utils/wipefs.c:156 sys-utils/losetup.c:325
+#: sys-utils/lscpu.c:1655 sys-utils/lscpu.c:1867 sys-utils/lscpu.c:1999
+#: sys-utils/lsipc.c:351 sys-utils/prlimit.c:297 sys-utils/rfkill.c:459
+#: sys-utils/swapon.c:284 sys-utils/wdctl.c:299 sys-utils/zramctl.c:494
+#: text-utils/column.c:209
#, fuzzy
-msgid "invalid block size"
-msgstr "umount：%s: 無效的區塊裝置"
+msgid "failed to allocate output table"
+msgstr "初始化輸出表格時失敗"
-#: disk-utils/mkfs.cramfs.c:741
-#, fuzzy
-msgid "edition number argument failed"
-msgstr "啟用 rtc 警示"
+#: disk-utils/fdisk-list.c:167 disk-utils/fdisk-list.c:270
+#: disk-utils/partx.c:581 login-utils/lslogins.c:1071 misc-utils/fincore.c:123
+#: misc-utils/findmnt.c:688 misc-utils/findmnt.c:706 misc-utils/lsblk.c:1073
+#: misc-utils/lslocks.c:393 misc-utils/uuidparse.c:154 misc-utils/wipefs.c:223
+#: sys-utils/losetup.c:348 sys-utils/losetup.c:377 sys-utils/lscpu.c:1674
+#: sys-utils/lscpu.c:1895 sys-utils/lscpu.c:1923 sys-utils/lsipc.c:480
+#: sys-utils/lsipc.c:555 sys-utils/lsipc.c:657 sys-utils/lsipc.c:749
+#: sys-utils/lsipc.c:910 sys-utils/prlimit.c:229 sys-utils/rfkill.c:376
+#: sys-utils/swapon.c:179 sys-utils/wdctl.c:249 sys-utils/zramctl.c:412
+#: text-utils/column.c:453 text-utils/column.c:474
+#, fuzzy
+msgid "failed to allocate output line"
+msgstr "callocate cpu 集合時失敗"
-#: disk-utils/mkfs.cramfs.c:751
-msgid "invalid endianness given. Must be 'big', 'little', or 'host'"
-msgstr ""
+#: disk-utils/fdisk-list.c:177 disk-utils/fdisk-list.c:277
+#: disk-utils/partx.c:644 login-utils/lslogins.c:1172 misc-utils/fincore.c:159
+#: misc-utils/findmnt.c:692 misc-utils/findmnt.c:711 misc-utils/lsblk.c:1114
+#: misc-utils/lslocks.c:443 misc-utils/uuidparse.c:239 misc-utils/wipefs.c:263
+#: sys-utils/losetup.c:305 sys-utils/lscpu.c:1741 sys-utils/lscpu.c:1903
+#: sys-utils/lscpu.c:1927 sys-utils/lscpu.c:1935 sys-utils/lsipc.c:514
+#: sys-utils/lsipc.c:639 sys-utils/prlimit.c:261 sys-utils/rfkill.c:404
+#: sys-utils/swapon.c:227 sys-utils/wdctl.c:277 sys-utils/zramctl.c:479
+#: text-utils/column.c:460
+#, fuzzy
+msgid "failed to add output data"
+msgstr "加入輸出列時失敗"
-#: disk-utils/mkfs.cramfs.c:757 disk-utils/mkfs.cramfs.c:790
+#: disk-utils/fdisk-list.c:197
#, fuzzy, c-format
-msgid "cannot stat %s"
-msgstr "無法識別「%s」狀態"
+msgid "Partition %zu does not start on physical sector boundary."
+msgstr "分割區 %i 並非開始於磁柱邊界。\n"
-#: disk-utils/mkfs.cramfs.c:811
-#, fuzzy, c-format
-msgid ""
-"warning: guestimate of required size (upper bound) is %lldMB, but maximum "
-"image size is %uMB. We might die prematurely."
+#: disk-utils/fdisk-list.c:204
+#, c-format
+msgid "Filesystem/RAID signature on partition %zu will be wiped."
msgstr ""
-"警告：所需大小預估 (上限) 為 %lldMB，但是影像大小最大值為 %uMB。 我們也許會過"
-"早中斷執行。\n"
-
-#: disk-utils/mkfs.cramfs.c:835
-msgid "ROM image map"
-msgstr "唯讀記憶體圖像映射"
-#: disk-utils/mkfs.cramfs.c:847
-#, c-format
-msgid "Including: %s\n"
-msgstr "包含：%s\n"
+#: disk-utils/fdisk-list.c:213
+#, fuzzy
+msgid "Partition table entries are not in disk order."
+msgstr ""
+"\n"
+"分割表項目未按磁碟排序\n"
-#: disk-utils/mkfs.cramfs.c:853
-#, c-format
-msgid "Directory data: %zd bytes\n"
-msgstr "目錄資料：%zd 位元組\n"
+#: disk-utils/fdisk-list.c:232 libfdisk/src/bsd.c:1026 libfdisk/src/dos.c:2495
+#: libfdisk/src/gpt.c:3005 libfdisk/src/sgi.c:1154 libfdisk/src/sun.c:1130
+#, fuzzy
+msgid "Start"
+msgstr "啟始"
-#: disk-utils/mkfs.cramfs.c:861
-#, c-format
-msgid "Everything: %zd kilobytes\n"
-msgstr "所有東西：%zd 千位元組\n"
+#: disk-utils/fdisk-list.c:232 libfdisk/src/bsd.c:1027 libfdisk/src/dos.c:2496
+#: libfdisk/src/gpt.c:3006 libfdisk/src/sgi.c:1155 libfdisk/src/sun.c:1131
+msgid "End"
+msgstr "結束"
-#: disk-utils/mkfs.cramfs.c:866
-#, c-format
-msgid "Super block: %zd bytes\n"
-msgstr "超區塊：%zd 位元組\n"
+#: disk-utils/fdisk-list.c:232 libfdisk/src/bsd.c:1028 libfdisk/src/dos.c:2497
+#: libfdisk/src/gpt.c:3007 libfdisk/src/sgi.c:1156 libfdisk/src/sun.c:1132
+msgid "Sectors"
+msgstr "磁區"
-#: disk-utils/mkfs.cramfs.c:873
-#, c-format
-msgid "CRC: %x\n"
-msgstr "CRC：%x\n"
+#: disk-utils/fdisk-list.c:232 libfdisk/src/bsd.c:1030 libfdisk/src/dos.c:2499
+#: libfdisk/src/gpt.c:3008 libfdisk/src/sgi.c:1158 libfdisk/src/sun.c:1134
+msgid "Size"
+msgstr ""
-#: disk-utils/mkfs.cramfs.c:878
+#: disk-utils/fdisk-list.c:292
#, fuzzy, c-format
-msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
-msgstr "配置給唯讀記憶體映像的空間不足 (%lld 已配置，%zu 已使用)\n"
-
-#: disk-utils/mkfs.cramfs.c:885
-msgid "ROM image"
-msgstr "唯讀記憶體映像"
+msgid "Unpartitioned space %s: %s, %ju bytes, %ju sectors"
+msgstr ""
+"\n"
+"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: disk-utils/mkfs.cramfs.c:887
+#: disk-utils/fdisk-list.c:478
#, fuzzy, c-format
-msgid "ROM image write failed (%zd %zd)"
-msgstr "唯讀記憶體映像寫入失敗 (%zd %zd)\n"
+msgid "%s unknown column: %s"
+msgstr "不明直欄：%s"
+
+#: disk-utils/fdisk-menu.c:96
+msgid "Generic"
+msgstr ""
-#: disk-utils/mkfs.cramfs.c:897
+#: disk-utils/fdisk-menu.c:97
#, fuzzy
-msgid "warning: filenames truncated to 255 bytes."
-msgstr "警告：檔名截短至 255 位元組。\n"
+msgid "delete a partition"
+msgstr "刪除分割"
-#: disk-utils/mkfs.cramfs.c:899
+#: disk-utils/fdisk-menu.c:98
#, fuzzy
-msgid "warning: files were skipped due to errors."
-msgstr "警告：檔案已因錯誤而略過。\n"
+msgid "list free unpartitioned space"
+msgstr "清單進階分割區"
-#: disk-utils/mkfs.cramfs.c:901
-#, fuzzy, c-format
-msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
-msgstr "警告：檔案大小截短至 %luMB (減去 1 位元組)。\n"
+#: disk-utils/fdisk-menu.c:99
+#, fuzzy
+msgid "list known partition types"
+msgstr "清單已知分割區類型"
-#: disk-utils/mkfs.cramfs.c:905
-#, fuzzy, c-format
-msgid "warning: uids truncated to %u bits. (This may be a security concern.)"
-msgstr "警告：uids 截短至 %u 位元。 (這個也許是安全上的考量。)\n"
+#: disk-utils/fdisk-menu.c:100
+#, fuzzy
+msgid "add a new partition"
+msgstr "加入新的分割"
-#: disk-utils/mkfs.cramfs.c:908
-#, fuzzy, c-format
-msgid "warning: gids truncated to %u bits. (This may be a security concern.)"
-msgstr "警告：gids 截短至 %u 位元。 (這個也許是安全上的考量。)\n"
+#: disk-utils/fdisk-menu.c:101
+#, fuzzy
+msgid "print the partition table"
+msgstr "列印分割表"
-#: disk-utils/mkfs.cramfs.c:911
-#, fuzzy, c-format
-msgid ""
-"WARNING: device numbers truncated to %u bits. This almost certainly means\n"
-"that some device files will be wrong."
-msgstr ""
-"警告：裝置數量截短至 %u 位元。 這幾乎明確意味著\n"
-"某些裝置檔案將會發生錯誤。\n"
+#: disk-utils/fdisk-menu.c:102
+#, fuzzy
+msgid "change a partition type"
+msgstr "變更分割系統識別號"
-#: disk-utils/mkfs.minix.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
-msgstr "用法：%s [-c | -l 檔名] [-nXX] [-iXX] /dev/名稱 [區塊]\n"
+#: disk-utils/fdisk-menu.c:103
+#, fuzzy
+msgid "verify the partition table"
+msgstr "驗證分割表"
-#: disk-utils/mkfs.minix.c:170
-#, c-format
-msgid "%s is mounted; will not make a filesystem here!"
-msgstr "%s 已掛載；在此將無法製作檔案系統！"
+#: disk-utils/fdisk-menu.c:104
+#, fuzzy
+msgid "print information about a partition"
+msgstr "%s：不是區塊裝置"
-#: disk-utils/mkfs.minix.c:196
-#, fuzzy, c-format
-msgid "%s: seek to boot block failed in write_tables"
-msgstr "å\9c¨ write_tables ä¸æ\90\9cå°\8bå\95\9få\8b\95å\8d\80å¡\8aæ\99\82失æ\95\97"
+#: disk-utils/fdisk-menu.c:106
+#, fuzzy
+msgid "print the raw data of the first sector from the device"
+msgstr "å\88\97å\8d°æ\9cªç¶\93è\99\95ç\90\86è³\87æ\96\99å\9c¨ä¸å\88\86å\89²è¡¨"
-#: disk-utils/mkfs.minix.c:199
-#, fuzzy, c-format
-msgid "%s: unable to clear boot sector"
-msgstr "無法清空開機磁區"
+#: disk-utils/fdisk-menu.c:107
+#, fuzzy
+msgid "print the raw data of the disklabel from the device"
+msgstr "列印未經處理資料在中分割表"
-#: disk-utils/mkfs.minix.c:201
-#, fuzzy, c-format
-msgid "%s: seek failed in write_tables"
-msgstr "在 write_tables 中的尋找失敗"
+#: disk-utils/fdisk-menu.c:108
+#, fuzzy
+msgid "fix partitions order"
+msgstr "修正分割排序"
-#: disk-utils/mkfs.minix.c:204
-#, fuzzy, c-format
-msgid "%s: unable to write super-block"
-msgstr "無法寫入 super-block"
+#: disk-utils/fdisk-menu.c:110
+msgid "Misc"
+msgstr ""
-#: disk-utils/mkfs.minix.c:207
-#, fuzzy, c-format
-msgid "%s: unable to write inode map"
-msgstr "無法寫入 inode 對映"
+#: disk-utils/fdisk-menu.c:111
+#, fuzzy
+msgid "print this menu"
+msgstr "印出這份選單"
-#: disk-utils/mkfs.minix.c:210
-#, fuzzy, c-format
-msgid "%s: unable to write zone map"
-msgstr "無法寫入區域對映"
+#: disk-utils/fdisk-menu.c:112
+#, fuzzy
+msgid "change display/entry units"
+msgstr "變更顯示/條目單位"
-#: disk-utils/mkfs.minix.c:213
-#, fuzzy, c-format
-msgid "%s: unable to write inodes"
-msgstr "無法寫入 inodes"
+#: disk-utils/fdisk-menu.c:113
+#, fuzzy
+msgid "extra functionality (experts only)"
+msgstr "額外功能性 (專家限用)"
-#: disk-utils/mkfs.minix.c:218
-#, fuzzy, c-format
-msgid "%s: seek failed in write_block"
-msgstr "write_block 時搜尋失敗"
+#: disk-utils/fdisk-menu.c:115
+msgid "Script"
+msgstr ""
-#: disk-utils/mkfs.minix.c:221
-#, fuzzy, c-format
-msgid "%s: write failed in write_block"
-msgstr "寫入 write_block 時失敗"
+#: disk-utils/fdisk-menu.c:116
+msgid "load disk layout from sfdisk script file"
+msgstr ""
-#: disk-utils/mkfs.minix.c:230 disk-utils/mkfs.minix.c:305
-#: disk-utils/mkfs.minix.c:354
-#, fuzzy, c-format
-msgid "%s: too many bad blocks"
-msgstr "太多不良區塊"
+#: disk-utils/fdisk-menu.c:117
+msgid "dump disk layout to sfdisk script file"
+msgstr ""
-#: disk-utils/mkfs.minix.c:238
-#, fuzzy, c-format
-msgid "%s: not enough good blocks"
-msgstr "良好區塊不足"
+#: disk-utils/fdisk-menu.c:119
+msgid "Save & Exit"
+msgstr ""
-#: disk-utils/mkfs.minix.c:484
-#, fuzzy, c-format
-msgid "%s: unable to alloc buffer for superblock"
-msgstr "無法配置緩衝區給超區塊"
+#: disk-utils/fdisk-menu.c:120
+#, fuzzy
+msgid "write table to disk and exit"
+msgstr "寫入表格到磁碟然後離開"
-#: disk-utils/mkfs.minix.c:530
-#, fuzzy, c-format
-msgid "%s: unable to allocate buffers for maps"
-msgstr "無法配置對映緩衝區"
+#: disk-utils/fdisk-menu.c:121
+#, fuzzy
+msgid "write table to disk"
+msgstr "寫入 disklabel 到磁碟"
-#: disk-utils/mkfs.minix.c:540
-#, fuzzy, c-format
-msgid "%s: unable to allocate buffer for inodes"
-msgstr "無法配置 inodes 緩衝區"
+#: disk-utils/fdisk-menu.c:122
+#, fuzzy
+msgid "quit without saving changes"
+msgstr "離開但不儲存變更"
-#: disk-utils/mkfs.minix.c:543
-#, fuzzy, c-format
-msgid "%lu inodes\n"
-msgstr "%ld inodes\n"
+#: disk-utils/fdisk-menu.c:123
+#, fuzzy
+msgid "return to main menu"
+msgstr "回傳到主選單"
-#: disk-utils/mkfs.minix.c:544
-#, fuzzy, c-format
-msgid "%lu blocks\n"
-msgstr "%ld 區塊\n"
+#: disk-utils/fdisk-menu.c:125
+msgid "return from BSD to DOS"
+msgstr ""
-#: disk-utils/mkfs.minix.c:547
-#, c-format
-msgid ""
-"Maxsize=%ld\n"
-"\n"
+#: disk-utils/fdisk-menu.c:127 disk-utils/fdisk-menu.c:226
+msgid "return from protective/hybrid MBR to GPT"
msgstr ""
-"最大容量=%ld\n"
-"\n"
-#: disk-utils/mkfs.minix.c:560
-#, fuzzy, c-format
-msgid "%s: seek failed during testing of blocks"
-msgstr "測試區塊的尋找失敗"
+#: disk-utils/fdisk-menu.c:138
+#, fuzzy
+msgid "Create a new label"
+msgstr "建立新的清空 Sun disklabel"
-#: disk-utils/mkfs.minix.c:567
-#, c-format
-msgid "Weird values in do_check: probably bugs\n"
-msgstr "do_check 中出現異常值：可能錯誤\n"
+#: disk-utils/fdisk-menu.c:139
+#, fuzzy
+msgid "create a new empty GPT partition table"
+msgstr "建立新的清空 DOS 分割表"
-#: disk-utils/mkfs.minix.c:600
-#, fuzzy, c-format
-msgid "%s: seek failed in check_blocks"
-msgstr "å\9c¨ check_blocks ä¸ç\9a\84å°\8bæ\89¾å¤±æ\95\97"
+#: disk-utils/fdisk-menu.c:140
+#, fuzzy
+msgid "create a new empty SGI (IRIX) partition table"
+msgstr "建ç«\8bæ\96°ç\9a\84æ¸\85空 DOS å\88\86å\89²è¡¨"
-#: disk-utils/mkfs.minix.c:610
-#, fuzzy, c-format
-msgid "%s: bad blocks before data-area: cannot make fs"
-msgstr "資料區之前有不良區塊：無法製作檔案系統"
+#: disk-utils/fdisk-menu.c:141
+#, fuzzy
+msgid "create a new empty DOS partition table"
+msgstr "建立新的清空 DOS 分割表"
-#: disk-utils/mkfs.minix.c:617 disk-utils/mkfs.minix.c:643
-#, c-format
-msgid "%d bad blocks\n"
-msgstr "%d 個不良區塊\n"
+#: disk-utils/fdisk-menu.c:142
+#, fuzzy
+msgid "create a new empty Sun partition table"
+msgstr "建立新的清空 DOS 分割表"
-#: disk-utils/mkfs.minix.c:619 disk-utils/mkfs.minix.c:645
-#, c-format
-msgid "one bad block\n"
-msgstr "一個不良區塊\n"
+#: disk-utils/fdisk-menu.c:146
+#, fuzzy
+msgid "create an IRIX (SGI) partition table"
+msgstr "建立 IRIX (SGI) 分割表"
-#: disk-utils/mkfs.minix.c:628
-#, fuzzy, c-format
-msgid "%s: can't open file of bad blocks"
-msgstr "無法開啟不良區塊中的檔案"
+#: disk-utils/fdisk-menu.c:155
+msgid "Geometry (for the current label)"
+msgstr ""
-#: disk-utils/mkfs.minix.c:633
-#, c-format
-msgid "badblock number input error on line %d\n"
-msgstr "損壞區塊編號輸入錯誤於第 %d 列\n"
+#: disk-utils/fdisk-menu.c:156
+#, fuzzy
+msgid "change number of cylinders"
+msgstr "變更磁柱數量"
-#: disk-utils/mkfs.minix.c:634
-#, fuzzy, c-format
-msgid "%s: cannot read badblocks file"
-msgstr "無法讀取損壞區塊檔案"
+#: disk-utils/fdisk-menu.c:157
+#, fuzzy
+msgid "change number of heads"
+msgstr "變更前端數量"
-#: disk-utils/mkfs.minix.c:671 disk-utils/mkfs.minix.c:673
-#, fuzzy, c-format
-msgid "%s: bad inode size"
-msgstr "不當的 inode 大小"
+#: disk-utils/fdisk-menu.c:158
+#, fuzzy
+msgid "change number of sectors/track"
+msgstr "變更磁區數量/軌段"
-#: disk-utils/mkfs.minix.c:723
-#, c-format
-msgid "strtol error: number of blocks not specified"
-msgstr "strtol 錯誤：區塊數量尚未指定"
+#: disk-utils/fdisk-menu.c:167 include/pt-mbr-partnames.h:98
+msgid "GPT"
+msgstr "GPT"
-#: disk-utils/mkfs.minix.c:753 partx/partx.c:782 sys-utils/fstrim.c:135
-#: sys-utils/swapon.c:435
-#, c-format
-msgid "%s: stat failed"
-msgstr "%s：stat 失敗"
+#: disk-utils/fdisk-menu.c:168
+#, fuzzy
+msgid "change disk GUID"
+msgstr "已變更"
-#: disk-utils/mkfs.minix.c:760 login-utils/last.c:238 login-utils/vipw.c:152
-#: misc-utils/findmnt.c:741 partx/partx.c:843 sys-utils/fallocate.c:149
-#: sys-utils/fsfreeze.c:102 sys-utils/fstrim.c:141 sys-utils/losetup.c:116
-#: sys-utils/swapon.c:232 sys-utils/swapon.c:318 sys-utils/swapon.c:466
-#: sys-utils/swapon.c:632 sys-utils/swapon.c:837 text-utils/rev.c:129
-#: text-utils/ul.c:229
-#, c-format
-msgid "%s: open failed"
-msgstr "%s：開啟失敗"
+#: disk-utils/fdisk-menu.c:169
+#, fuzzy
+msgid "change partition name"
+msgstr "分割名稱"
-#: disk-utils/mkfs.minix.c:769
-#, fuzzy, c-format
-msgid "%s: device is misaligned"
-msgstr "%s：%s：裝置忙碌中"
+#: disk-utils/fdisk-menu.c:170
+#, fuzzy
+msgid "change partition UUID"
+msgstr "分割 UUID"
-#: disk-utils/mkfs.minix.c:772
-#, c-format
-msgid "block size smaller than physical sector size of %s"
-msgstr "å\8d\80段大å°\8få°\8fæ\96¼ %s ç\9a\84實é«\94ç£\81å\8d\80大å°\8f"
+#: disk-utils/fdisk-menu.c:171
+#, fuzzy
+msgid "change table length"
+msgstr "å\89\96æ\9e\90é\95·åº¦æ\99\82失æ\95\97"
-#: disk-utils/mkfs.minix.c:776
-#, c-format
-msgid "cannot determine size of %s"
-msgstr "無法決定 %s 的大小"
+#: disk-utils/fdisk-menu.c:172
+msgid "enter protective/hybrid MBR"
+msgstr ""
-#: disk-utils/mkfs.minix.c:785
-#, c-format
-msgid "will not try to make filesystem on '%s'"
-msgstr "å°\87ä¸\8dæ\9c\83試è\91\97æ\96¼ã\80\8c%sã\80\8d製ä½\9cæª\94æ¡\88系統"
+#: disk-utils/fdisk-menu.c:175
+#, fuzzy
+msgid "toggle the legacy BIOS bootable flag"
+msgstr "å\88\87æ\8f\9bå\8f¯é\96\8bæ©\9fç\9a\84æ\97\97æ¨\99"
-#: disk-utils/mkfs.minix.c:787
-#, fuzzy, c-format
-msgid "%s: number of blocks too small"
-msgstr "å\8d\80å¡\8aæ\95¸é\87\8f太å°\8f"
+#: disk-utils/fdisk-menu.c:176
+#, fuzzy
+msgid "toggle the no block IO protocol flag"
+msgstr "å\88\87æ\8f\9b DOS ç\9b¸å®¹æ\80§æ\97\97æ¨\99"
-#: disk-utils/mkswap.c:160
-#, fuzzy, c-format
-msgid "Bad user-specified page size %lu"
-msgstr "不當的使用者指定頁面大小 %d\n"
+#: disk-utils/fdisk-menu.c:177
+#, fuzzy
+msgid "toggle the required partition flag"
+msgstr "切換 DOS 相容性旗標"
-#: disk-utils/mkswap.c:166
-#, fuzzy, c-format
-msgid "Using user-specified page size %d, instead of the system value %d"
-msgstr "正在採行使用者指定頁面大小 %d, 以代替系統值 %d\n"
+#: disk-utils/fdisk-menu.c:178
+msgid "toggle the GUID specific bits"
+msgstr ""
+
+#: disk-utils/fdisk-menu.c:188
+msgid "Sun"
+msgstr ""
-#: disk-utils/mkswap.c:189
+#: disk-utils/fdisk-menu.c:189
#, fuzzy
-msgid "Bad swap header size, no label written."
-msgstr "不當的交換頁首大小，未寫入標籤。\n"
+msgid "toggle the read-only flag"
+msgstr "切換唯讀旗標"
-#: disk-utils/mkswap.c:199
+#: disk-utils/fdisk-menu.c:190
#, fuzzy
-msgid "Label was truncated."
-msgstr "標籤已被截斷。\n"
+msgid "toggle the mountable flag"
+msgstr "切換 mountable 旗標"
-#: disk-utils/mkswap.c:205
-#, c-format
-msgid "no label, "
-msgstr "無標籤，"
+#: disk-utils/fdisk-menu.c:192
+#, fuzzy
+msgid "change number of alternate cylinders"
+msgstr "變更交替磁柱數量"
+
+#: disk-utils/fdisk-menu.c:193
+#, fuzzy
+msgid "change number of extra sectors per cylinder"
+msgstr "變更額外磁區數量各磁柱"
+
+#: disk-utils/fdisk-menu.c:194
+#, fuzzy
+msgid "change interleave factor"
+msgstr "變更交插因子"
+
+#: disk-utils/fdisk-menu.c:195
+#, fuzzy
+msgid "change rotation speed (rpm)"
+msgstr "變更轉速 (rpm)"
+
+#: disk-utils/fdisk-menu.c:196
+#, fuzzy
+msgid "change number of physical cylinders"
+msgstr "變更實體磁柱數量"
+
+#: disk-utils/fdisk-menu.c:205
+#, fuzzy
+msgid "SGI"
+msgstr "SGI raw"
+
+#: disk-utils/fdisk-menu.c:206
+#, fuzzy
+msgid "select bootable partition"
+msgstr "選取可開機的分割"
+
+#: disk-utils/fdisk-menu.c:207
+#, fuzzy
+msgid "edit bootfile entry"
+msgstr "編輯 bootfile 條目"
+
+#: disk-utils/fdisk-menu.c:208
+#, fuzzy
+msgid "select sgi swap partition"
+msgstr "選取 sgi 交換分割區"
+
+#: disk-utils/fdisk-menu.c:209
+msgid "create SGI info"
+msgstr ""
+
+#: disk-utils/fdisk-menu.c:218
+#, fuzzy
+msgid "DOS (MBR)"
+msgstr "DOS R/O"
+
+#: disk-utils/fdisk-menu.c:219
+#, fuzzy
+msgid "toggle a bootable flag"
+msgstr "切換可開機的旗標"
+
+#: disk-utils/fdisk-menu.c:220
+#, fuzzy
+msgid "edit nested BSD disklabel"
+msgstr "編輯 bsd disklabel"
+
+#: disk-utils/fdisk-menu.c:221
+#, fuzzy
+msgid "toggle the dos compatibility flag"
+msgstr "切換 DOS 相容性旗標"
+
+#: disk-utils/fdisk-menu.c:223
+#, fuzzy
+msgid "move beginning of data in a partition"
+msgstr "移動起始部分的資料在中分割"
+
+#: disk-utils/fdisk-menu.c:224
+#, fuzzy
+msgid "change the disk identifier"
+msgstr "變更磁碟識別碼"
+
+#: disk-utils/fdisk-menu.c:236
+#, fuzzy
+msgid "BSD"
+msgstr "BSD/OS"
+
+#: disk-utils/fdisk-menu.c:237
+#, fuzzy
+msgid "edit drive data"
+msgstr "編輯推動資料"
+
+#: disk-utils/fdisk-menu.c:238
+#, fuzzy
+msgid "install bootstrap"
+msgstr "安裝啟動程式"
+
+#: disk-utils/fdisk-menu.c:239
+#, fuzzy
+msgid "show complete disklabel"
+msgstr "顯示完成 disklabel"
-#: disk-utils/mkswap.c:213
+#: disk-utils/fdisk-menu.c:240
+#, fuzzy
+msgid "link BSD partition to non-BSD partition"
+msgstr "鏈結 BSD 分割到 non-BSD 分割"
+
+#: disk-utils/fdisk-menu.c:372
#, c-format
-msgid "no uuid\n"
-msgstr "沒有 uuid\n"
+msgid ""
+"\n"
+"Help (expert commands):\n"
+msgstr ""
-#: disk-utils/mkswap.c:278
+#: disk-utils/fdisk-menu.c:374 disk-utils/sfdisk.c:1357
#, fuzzy, c-format
msgid ""
"\n"
-"Usage:\n"
-" %s [options] device [size]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+"Help:\n"
+msgstr "求助"
-#: disk-utils/mkswap.c:283
+#: disk-utils/fdisk-menu.c:394
#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -c, --check check bad blocks before creating the swap area\n"
-" -f, --force allow swap size area be larger than device\n"
-" -p, --pagesize SIZE specify page size in bytes\n"
-" -L, --label LABEL specify label\n"
-" -v, --swapversion NUM specify swap-space version number\n"
-" -U, --uuid UUID specify the uuid to use\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+msgid "You're editing nested '%s' partition table, primary partition table is '%s'."
msgstr ""
-#: disk-utils/mkswap.c:302
-msgid "too many bad pages"
-msgstr "太å¤\9aä¸\8dè\89¯é \81é\9d¢"
+#: disk-utils/fdisk-menu.c:424
+msgid "Expert command (m for help): "
+msgstr "å°\88家å\91½ä»¤ (m 以ç\8d²å¾\97說æ\98\8e)ï¼\9a"
-#: disk-utils/mkswap.c:319
-msgid "seek failed in check_blocks"
-msgstr "å\9c¨ check_blocks ä¸ç\9a\84å°\8bæ\89¾å¤±æ\95\97"
+#: disk-utils/fdisk-menu.c:426
+msgid "Command (m for help): "
+msgstr "å\91½ä»¤ (m 以ç\8d²å¾\97說æ\98\8e)ï¼\9a"
-#: disk-utils/mkswap.c:325
-#, c-format
-msgid "one bad page\n"
-msgstr "一個不良頁面\n"
+#: disk-utils/fdisk-menu.c:436
+msgid ""
+"\n"
+"All unwritten changes will be lost, do you really want to quit? "
+msgstr ""
-#: disk-utils/mkswap.c:327
-#, c-format
-msgid "%lu bad pages\n"
-msgstr "%lu 個不良頁面\n"
+#: disk-utils/fdisk-menu.c:449
+#, fuzzy, c-format
+msgid "%c: unknown command"
+msgstr "%c: 不明的命令\n"
-#: disk-utils/mkswap.c:379
-msgid "unable to alloc new libblkid probe"
-msgstr "無法配置新的 libblkid 探針"
+#: disk-utils/fdisk-menu.c:474 disk-utils/fdisk-menu.c:507
+#, fuzzy
+msgid "Enter script file name"
+msgstr "無法寫入指令稿檔案"
-#: disk-utils/mkswap.c:381
-msgid "unable to assign device to libblkid probe"
-msgstr "無法指派裝置給 libblkid 探針"
+#: disk-utils/fdisk-menu.c:486
+msgid "Resetting fdisk!"
+msgstr ""
-#: disk-utils/mkswap.c:397 disk-utils/mkswap.c:431 disk-utils/mkswap.c:655
-msgid "unable to rewind swap-device"
-msgstr "無法倒轉交換裝置"
+#: disk-utils/fdisk-menu.c:493
+msgid "Script successfully applied."
+msgstr ""
-#: disk-utils/mkswap.c:435
-msgid "unable to erase bootbits sectors"
-msgstr "無法清除開機磁區"
+#: disk-utils/fdisk-menu.c:519
+#, fuzzy
+msgid "Failed to transform disk layout into script"
+msgstr "加入輸出列時失敗"
+
+#: disk-utils/fdisk-menu.c:533
+msgid "Script successfully saved."
+msgstr ""
-#: disk-utils/mkswap.c:451
+#: disk-utils/fdisk-menu.c:556 disk-utils/sfdisk.c:1580
#, fuzzy, c-format
-msgid "%s: warning: don't erase bootbits sectors"
-msgstr "%s：%s：警告：不清除開機磁區\n"
+msgid "Partition #%zu contains a %s signature."
+msgstr "警告：分割區 %d 含有磁區 0\n"
-#: disk-utils/mkswap.c:454
-#, c-format
-msgid " (%s partition table detected). "
-msgstr " (偵測到 %s 分割表)。"
+#: disk-utils/fdisk-menu.c:559 disk-utils/sfdisk.c:1583
+#, fuzzy
+msgid "Do you want to remove the signature?"
+msgstr "您要將這個寫入磁碟嗎？[ynq] "
-#: disk-utils/mkswap.c:456
-#, c-format
-msgid " on whole disk. "
-msgstr " 於整個磁碟。"
+#: disk-utils/fdisk-menu.c:564 disk-utils/sfdisk.c:1588
+msgid "The signature will be removed by a write command."
+msgstr ""
-#: disk-utils/mkswap.c:458
-#, c-format
-msgid " (compiled without libblkid). "
-msgstr " (編譯時未支援 libblkid)。"
+#: disk-utils/fdisk-menu.c:597
+#, fuzzy
+msgid "failed to write disklabel"
+msgstr "%s：無法寫入標籤"
-#: disk-utils/mkswap.c:509
+#: disk-utils/fdisk-menu.c:640
#, fuzzy
-msgid "parse page size failed"
-msgstr "%s：取得大小時失敗"
+msgid "Failed to fix partitions order."
+msgstr "修正分割排序"
-#: disk-utils/mkswap.c:515
+#: disk-utils/fdisk-menu.c:642
#, fuzzy
-msgid "parse version number failed"
-msgstr "建立號誌時失敗"
+msgid "Partitions order fixed."
+msgstr "無已定義分割區\n"
-#: disk-utils/mkswap.c:521
+#: disk-utils/fdisk-menu.c:660
#, fuzzy, c-format
-msgid "warning: ignore -U (UUIDs are unsupported by %s)"
-msgstr "%1$s: 警告：忽略 -U (UUIDs 未被 %1$s 支援)\n"
+msgid "Could not delete partition %zu"
+msgstr "已選分割區 %d\n"
-#: disk-utils/mkswap.c:546
-#, fuzzy, c-format
-msgid "does not support swapspace version %lu."
-msgstr "%s：不支援 swapspace 版本 %d。\n"
+#: disk-utils/fdisk-menu.c:689
+#, fuzzy
+msgid "Changing display/entry units to cylinders (DEPRECATED!)."
+msgstr "變更顯示/輸入單位為磁柱 (不宜再用！)\n"
-#: disk-utils/mkswap.c:552
-msgid "error: UUID parsing failed"
-msgstr "錯誤：UUID 剖析失敗"
+#: disk-utils/fdisk-menu.c:691
+#, fuzzy
+msgid "Changing display/entry units to sectors."
+msgstr "變更顯示/輸入單位為磁區\n"
-#: disk-utils/mkswap.c:561
+#: disk-utils/fdisk-menu.c:701 disk-utils/fdisk-menu.c:872
#, fuzzy
-msgid "error: Nowhere to set up swap on?"
-msgstr "%s：錯誤：無處可設置開啟交換？\n"
+msgid "Leaving nested disklabel."
+msgstr "編輯 bsd disklabel"
-#: disk-utils/mkswap.c:579
-#, fuzzy, c-format
-msgid "error: size %llu KiB is larger than device size %llu KiB"
-msgstr "%s：錯誤：大小 %llu KiB 大於裝置大小 %llu KiB\n"
+#: disk-utils/fdisk-menu.c:738
+msgid "New maximum entries"
+msgstr ""
-#: disk-utils/mkswap.c:585
-#, fuzzy, c-format
-msgid "error: swap area needs to be at least %ld KiB"
-msgstr "%s：錯誤：交換區需要至少 %ld KiB\n"
+#: disk-utils/fdisk-menu.c:749
+msgid "Entering protective/hybrid MBR disklabel."
+msgstr ""
-#: disk-utils/mkswap.c:601
-#, fuzzy, c-format
-msgid "warning: truncating swap area to %llu KiB"
-msgstr "%s：警告：將交換區截斷為 %llu KiB\n"
+#: disk-utils/fdisk-menu.c:765
+msgid "New UUID (in 8-4-4-4-12 format)"
+msgstr ""
-#: disk-utils/mkswap.c:623
-#, fuzzy, c-format
-msgid "error: will not try to make swapdevice on '%s'"
-msgstr "%s：錯誤：將不會試著於「%s」製作交換裝置\n"
+#: disk-utils/fdisk-menu.c:780
+#, fuzzy
+msgid "New name"
+msgstr "使用者名稱"
+
+#: disk-utils/fdisk-menu.c:843
+#, fuzzy
+msgid "Entering nested BSD disklabel."
+msgstr "建立新的 Sun disklabel。\n"
+
+#: disk-utils/fdisk-menu.c:1041
+msgid "Number of cylinders"
+msgstr "磁柱數量"
+
+#: disk-utils/fdisk-menu.c:1048
+msgid "Number of heads"
+msgstr "磁頭數量"
+
+#: disk-utils/fdisk-menu.c:1054
+msgid "Number of sectors"
+msgstr "磁區數量"
-#: disk-utils/mkswap.c:627
+#: disk-utils/fsck.c:213
#, fuzzy, c-format
-msgid "error: %s is mounted; will not make swapspace."
-msgstr "%s：錯誤：%s 已掛載；將不會製作交換空間。\n"
+msgid "%s is mounted\n"
+msgstr "%s 被掛載\n"
-#: disk-utils/mkswap.c:631
+#: disk-utils/fsck.c:215
#, fuzzy, c-format
-msgid "warning: %s is misaligned"
-msgstr "警告：%s 並非區塊裝置\n"
+msgid "%s is not mounted\n"
+msgstr "%s 未被掛載\n"
-#: disk-utils/mkswap.c:644
-msgid "Unable to set up swap-space: unreadable"
-msgstr "無法設置交換空間：無法讀取"
+#: disk-utils/fsck.c:329 disk-utils/fsck.cramfs.c:171
+#: disk-utils/fsck.cramfs.c:178 disk-utils/fsck.cramfs.c:234
+#: disk-utils/fsck.cramfs.c:255 disk-utils/sfdisk.c:301 libfdisk/src/bsd.c:647
+#: login-utils/last.c:208 login-utils/last.c:245 login-utils/sulogin.c:657
+#: misc-utils/hardlink.c:290 misc-utils/hardlink.c:292
+#: sys-utils/ctrlaltdel.c:44 sys-utils/rfkill.c:213 sys-utils/setpriv.c:268
+#: term-utils/setterm.c:747 term-utils/setterm.c:804 term-utils/setterm.c:808
+#: term-utils/setterm.c:815
+#, fuzzy, c-format
+msgid "cannot read %s"
+msgstr "無法讀取 %s"
-#: disk-utils/mkswap.c:647
+#: disk-utils/fsck.c:331
#, c-format
-msgid "Setting up swapspace version 1, size = %llu KiB\n"
-msgstr "設定 swapspace 版本 1, 大小 = %llu KiB\n"
+msgid "parse error: %s"
+msgstr "剖析錯誤：%s"
-#: disk-utils/mkswap.c:659
+#: disk-utils/fsck.c:358
#, fuzzy, c-format
-msgid "%s: unable to write signature page"
-msgstr "%s：%s：無法寫入簽章頁面：%s"
+msgid "cannot create directory %s"
+msgstr "無法變更目錄到 %s"
-#: disk-utils/mkswap.c:668
-msgid "fsync failed"
-msgstr "fsync 失敗"
-
-#: disk-utils/mkswap.c:680
+#: disk-utils/fsck.c:371
#, fuzzy, c-format
-msgid "%s: unable to obtain selinux file label"
-msgstr "%s: %s: 無法得到 selinux 檔案標籤：%s\n"
+msgid "Locking disk by %s ... "
+msgstr "鎖定磁碟 %s…"
-#: disk-utils/mkswap.c:683
-msgid "unable to matchpathcon()"
-msgstr "無法 matchpathcon()"
+#: disk-utils/fsck.c:382
+#, fuzzy, c-format
+msgid "(waiting) "
+msgstr "(等待) "
-#: disk-utils/mkswap.c:686
-msgid "unable to create new selinux context"
-msgstr "無法建立新的 selinux 相關項目"
+#. TRANSLATORS: These are followups to "Locking disk...".
+#: disk-utils/fsck.c:392
+#, fuzzy
+msgid "succeeded"
+msgstr "成功"
-#: disk-utils/mkswap.c:688
-msgid "couldn't compute selinux context"
-msgstr "無法計算 selinux 相關項目"
+#: disk-utils/fsck.c:392
+#, fuzzy
+msgid "failed"
+msgstr "失敗"
-#: disk-utils/mkswap.c:694
+#: disk-utils/fsck.c:410
#, fuzzy, c-format
-msgid "unable to relabel %s to %s"
-msgstr "%s：無法重新標籤 %s 為 %s: %s\n"
+msgid "Unlocking %s.\n"
+msgstr "正在使用 %s。\n"
-#: disk-utils/raw.c:50
-#, c-format
-msgid ""
-"Usage:\n"
-" %1$s %2$srawN <major> <minor>\n"
-" %1$s %2$srawN /dev/<blockdevice>\n"
-" %1$s -q %2$srawN\n"
-" %1$s -qa\n"
-msgstr ""
+#: disk-utils/fsck.c:442
+#, fuzzy, c-format
+msgid "failed to setup description for %s"
+msgstr "設定描述用於 %s 時失敗"
-#: disk-utils/raw.c:125
+#: disk-utils/fsck.c:472 misc-utils/findmnt.c:784 misc-utils/lsblk-mnt.c:17
+#: sys-utils/mount.c:95 sys-utils/swapon-common.c:19 sys-utils/umount.c:51
#, fuzzy, c-format
-msgid ""
-"Device '%s' is the control raw device (use raw<N> where <N> is greater than "
-"zero)\n"
-msgstr "裝置「%s」控制 raw 裝置 (使用 raw<N> 其中 <N> 大於零)\n"
+msgid "%s: parse error at line %d -- ignored"
+msgstr "%s：剖析錯誤於列 %d -- 忽略"
-#: disk-utils/raw.c:145
+#: disk-utils/fsck.c:504 disk-utils/fsck.c:506
#, fuzzy, c-format
-msgid "Cannot locate block device '%s' (%m)\n"
-msgstr "無法定位區塊裝置「%s」(%s)\n"
+msgid "%s: failed to parse fstab"
+msgstr "%s：無法剖析 fstab"
+
+#: disk-utils/fsck.c:687 login-utils/login.c:943 login-utils/sulogin.c:1024
+#: login-utils/vipw.c:208 sys-utils/flock.c:348 sys-utils/nsenter.c:180
+#: sys-utils/swapon.c:320 sys-utils/unshare.c:229 sys-utils/unshare.c:494
+msgid "fork failed"
+msgstr "衍生執行時失敗"
-#: disk-utils/raw.c:151
+#: disk-utils/fsck.c:694
#, fuzzy, c-format
-msgid "Device '%s' is not a block device\n"
-msgstr "裝置「%s」並非區塊裝置\n"
+msgid "%s: execute failed"
+msgstr "%s：執行失敗"
+
+#: disk-utils/fsck.c:782
+#, fuzzy
+msgid "wait: no more child process?!?"
+msgstr "等待：已無更多子行程 ?!?"
-#: disk-utils/raw.c:184
+#: disk-utils/fsck.c:785 sys-utils/flock.c:366 sys-utils/swapon.c:352
+#: sys-utils/unshare.c:478 sys-utils/unshare.c:499
+msgid "waitpid failed"
+msgstr "waitpid 失敗"
+
+#: disk-utils/fsck.c:803
#, fuzzy, c-format
-msgid "Cannot open master raw device '%s' (%s)\n"
-msgstr "無法定位 raw 裝置「%s」(%s)\n"
+msgid "Warning... %s for device %s exited with signal %d."
+msgstr "警告…%s 用於裝置 %s 離開的與信號 %d。"
-#: disk-utils/raw.c:202
+#: disk-utils/fsck.c:809
#, fuzzy, c-format
-msgid "Cannot locate raw device '%s' (%m)\n"
-msgstr "無法定位 raw 裝置「%s」(%s)\n"
+msgid "%s %s: status is %x, should never happen."
+msgstr "%s %s：狀態是 %x，應該永不發生。"
-#: disk-utils/raw.c:208
+#: disk-utils/fsck.c:855
#, c-format
-msgid "Raw device '%s' is not a character dev\n"
-msgstr "Raw 裝置「%s」並非字元裝置\n"
+msgid "Finished with %s (exit status %d)\n"
+msgstr "以 %s 完成 (離開狀態 %d)\n"
+
+#: disk-utils/fsck.c:936
+#, fuzzy, c-format
+msgid "error %d (%m) while executing fsck.%s for %s"
+msgstr "%d 當執行 fsck 時發生錯誤.%s 用於 %s"
+
+#: disk-utils/fsck.c:1002
+#, fuzzy
+msgid ""
+"Either all or none of the filesystem types passed to -t must be prefixed\n"
+"with 'no' or '!'."
+msgstr ""
+"還是所有或沒有任何檔案系統類型傳遞到 -t 必須被前綴\n"
+"與『沒有』或『！』。"
+
+#: disk-utils/fsck.c:1118
+#, fuzzy, c-format
+msgid "%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
+msgstr "%s：跳過不當的列在中/etc/fstab：繫結掛載與非零值 fsck 傳送號碼"
-#: disk-utils/raw.c:213
+#: disk-utils/fsck.c:1130
#, c-format
-msgid "Device '%s' is not a raw dev\n"
-msgstr "裝置「%s」並非 raw 裝置\n"
+msgid "%s: skipping nonexistent device\n"
+msgstr "%s：跳過不存在的裝置\n"
-#: disk-utils/raw.c:228
+#: disk-utils/fsck.c:1135
#, fuzzy, c-format
-msgid "Error querying raw device (%m)\n"
-msgstr "查詢 raw 裝置 (%s) 時發生錯誤\n"
+msgid "%s: nonexistent device (\"nofail\" fstab option may be used to skip this device)\n"
+msgstr "%s：不存在的裝置 (「nofail」fstab 選項也許會被用來跳過這個裝置)\n"
-#: disk-utils/raw.c:237 disk-utils/raw.c:256
+#: disk-utils/fsck.c:1152
#, fuzzy, c-format
-msgid "%sraw%d: bound to major %d, minor %d\n"
-msgstr "raw%d:\t繫結到主要 %d，次要 %d\n"
+msgid "%s: skipping unknown filesystem type\n"
+msgstr "%s：跳過不明檔案系統型態\n"
-#: disk-utils/raw.c:253
+#: disk-utils/fsck.c:1166
#, fuzzy, c-format
-msgid "Error setting raw device (%m)\n"
-msgstr "設定 raw 裝置 (%s) 時發生錯誤\n"
+msgid "cannot check %s: fsck.%s not found"
+msgstr "無法檢查 %s：fsck.not 找到 %s "
+
+#: disk-utils/fsck.c:1270
+msgid "Checking all file systems.\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/swaplabel.c:49 disk-utils/swaplabel.c:62
+#: disk-utils/fsck.c:1361
#, c-format
-msgid "%s: unable to probe device"
-msgstr "%s：無法探查裝置"
-
-#: disk-utils/swaplabel.c:64
-#, c-format
-msgid "%s: ambivalent probing result, use wipefs(8)"
-msgstr "%s：探查結果產生矛盾，使用 wipefs(8)"
-
-#: disk-utils/swaplabel.c:66
-#, c-format
-msgid "%s: not a valid swap partition"
-msgstr "%s：不是有效的交換分割區"
-
-#: disk-utils/swaplabel.c:72
-#, c-format
-msgid "%s: unsupported swap version '%s'"
-msgstr "%s：不受支援的交換版本「%s」"
-
-#: disk-utils/swaplabel.c:103
-#, c-format
-msgid "%s: failed to open"
-msgstr "%s：無法開啟"
+msgid "--waiting-- (pass %d)\n"
+msgstr "--等待-- (通過 %d)\n"
-#: disk-utils/swaplabel.c:112
-#, c-format
-msgid "failed to parse UUID: %s"
-msgstr "剖析 UUID 時失敗：%s"
+#: disk-utils/fsck.c:1387
+#, fuzzy, c-format
+msgid " %s [options] -- [fs-options] [<filesystem> ...]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [fsck-options] [fs-options] [filesys...]\n"
-#: disk-utils/swaplabel.c:116
-#, c-format
-msgid "%s: failed to seek to swap UUID"
-msgstr "%s：無法尋指到交換 UUID"
+#: disk-utils/fsck.c:1391
+#, fuzzy
+msgid "Check and repair a Linux filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/swaplabel.c:120
-#, c-format
-msgid "%s: failed to write UUID"
-msgstr "%s：無法寫入 UUID"
+#: disk-utils/fsck.c:1394
+#, fuzzy
+msgid " -A check all filesystems\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/swaplabel.c:131
-#, c-format
-msgid "%s: failed to seek to swap label "
-msgstr "%s：無法尋指到交換標籤 "
+#: disk-utils/fsck.c:1395
+msgid " -C [<fd>] display progress bar; file descriptor is for GUIs\n"
+msgstr ""
-#: disk-utils/swaplabel.c:138
-#, c-format
-msgid "label is too long. Truncating it to '%s'"
-msgstr "標籤太長。將它截斷為「%s」"
+#: disk-utils/fsck.c:1396
+msgid " -l lock the device to guarantee exclusive access\n"
+msgstr ""
-#: disk-utils/swaplabel.c:141
-#, c-format
-msgid "%s: failed to write label"
-msgstr "%s：無法寫入標籤"
+#: disk-utils/fsck.c:1397
+#, fuzzy
+msgid " -M do not check mounted filesystems\n"
+msgstr " t 變更檔案系統的類型"
-#: disk-utils/swaplabel.c:156
-#, c-format
-msgid ""
-"Usage: %s [options] <device>\n"
-"\n"
-"Options:\n"
+#: disk-utils/fsck.c:1398
+msgid " -N do not execute, just show what would be done\n"
msgstr ""
-"用法：%s [選項] <裝置>\n"
-"\n"
-"選項：\n"
-#: disk-utils/swaplabel.c:160
-#, c-format
-msgid ""
-" -h, --help this help\n"
-" -L, --label <label> specify a new label\n"
-" -U, --uuid <uuid> specify a new uuid\n"
+#: disk-utils/fsck.c:1399
+msgid " -P check filesystems in parallel, including root\n"
msgstr ""
-" -h, --help 這個說明\n"
-" -L, --label <label> 指定新的標籤\n"
-" -U, --uuid <uuid> 指定新的 uuid\n"
-#: disk-utils/swaplabel.c:164
-#, c-format
-msgid ""
-"\n"
-"For more information see swaplabel(8).\n"
+#: disk-utils/fsck.c:1400
+msgid " -R skip root filesystem; useful only with '-A'\n"
msgstr ""
-"\n"
-"要獲得更多資訊請參看 swaplabel(8)。\n"
-
-#: disk-utils/swaplabel.c:198
-msgid "ignore -U (UUIDs are unsupported)"
-msgstr "忽略 -U (UUIDs 不受支援)"
-#: fdisk/cfdisk.c:362
-#, c-format
-msgid "%s: Out of memory!\n"
-msgstr "%s：記憶體不足！\n"
+#: disk-utils/fsck.c:1401
+#, fuzzy
+msgid ""
+" -r [<fd>] report statistics for each device checked;\n"
+" file descriptor is for GUIs\n"
+msgstr " -l [或 --list]： 列出每個裝置的分割區"
-# "無法建立 %s: %s\n"
-#: fdisk/cfdisk.c:387 fdisk/cfdisk.c:1900
-msgid "Unusable"
-msgstr "無法使用"
+#: disk-utils/fsck.c:1403
+#, fuzzy
+msgid " -s serialize the checking operations\n"
+msgstr " d 刪除目前的分割區"
-#: fdisk/cfdisk.c:389 fdisk/cfdisk.c:1902
-msgid "Free Space"
-msgstr "剩餘空間"
+#: disk-utils/fsck.c:1404
+#, fuzzy
+msgid " -T do not show the title on startup\n"
+msgstr " -f 不分割長列\n"
-#: fdisk/cfdisk.c:404
-#, c-format
-msgid "Disk has been changed.\n"
-msgstr "磁碟已變更。\n"
+#: disk-utils/fsck.c:1405
+msgid ""
+" -t <type> specify filesystem types to be checked;\n"
+" <type> is allowed to be a comma-separated list\n"
+msgstr ""
-#: fdisk/cfdisk.c:406
-#, c-format
-msgid "Reboot the system to ensure the partition table is correctly updated.\n"
-msgstr "系統重新開機以確保分割表正確地被更新。\n"
+#: disk-utils/fsck.c:1407
+#, fuzzy
+msgid " -V explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: fdisk/cfdisk.c:410
-#, c-format
-msgid ""
-"\n"
-"WARNING: If you have created or modified any\n"
-"DOS 6.x partitions, please see the cfdisk manual\n"
-"page for additional information.\n"
+#: disk-utils/fsck.c:1413
+msgid "See the specific fsck.* commands for available fs-options."
msgstr ""
-"\n"
-"警告：如果您已建立或修改任何\n"
-"DOS 6.x 分割區，請參看 cfdisk 手冊\n"
-"以獲得額外的資訊。\n"
-#: fdisk/cfdisk.c:554
-msgid "FATAL ERROR"
-msgstr "嚴重錯誤"
+#: disk-utils/fsck.c:1458
+#, fuzzy
+msgid "too many devices"
+msgstr "太多裝置"
-#: fdisk/cfdisk.c:555
-msgid "Press any key to exit cfdisk"
-msgstr "按任何鍵以離開 cfdisk"
+#: disk-utils/fsck.c:1470
+#, fuzzy
+msgid "Is /proc mounted?"
+msgstr "是/proc 掛載？"
-#: fdisk/cfdisk.c:602 fdisk/cfdisk.c:610
-msgid "Cannot seek on disk drive"
-msgstr "無法搜尋磁碟"
+#: disk-utils/fsck.c:1478
+#, fuzzy, c-format
+msgid "must be root to scan for matching filesystems: %s"
+msgstr "必須是根到掃描用於匹配檔案系統：%s"
-#: fdisk/cfdisk.c:604
-msgid "Cannot read disk drive"
-msgstr "無法讀取磁碟"
+#: disk-utils/fsck.c:1482
+#, fuzzy, c-format
+msgid "couldn't find matching filesystem: %s"
+msgstr "找不到匹配檔案系統：%s"
-#: fdisk/cfdisk.c:612
-msgid "Cannot write disk drive"
-msgstr "無法寫入磁碟"
+#: disk-utils/fsck.c:1490 disk-utils/fsck.c:1587 misc-utils/kill.c:281
+#: sys-utils/eject.c:279
+#, fuzzy
+msgid "too many arguments"
+msgstr "太多引數"
-#: fdisk/cfdisk.c:820
-msgid "Too many partitions"
-msgstr "分割區過多"
+#: disk-utils/fsck.c:1545 disk-utils/fsck.c:1548
+#, fuzzy
+msgid "invalid argument of -r"
+msgstr "無效的引數：%s"
-#: fdisk/cfdisk.c:825
-msgid "Partition begins before sector 0"
-msgstr "分割區開端小於磁區 0"
+#: disk-utils/fsck.c:1560
+#, fuzzy, c-format
+msgid "option '%s' may be specified only once"
+msgstr "選項 --pid 也許會被指定的只一次"
-#: fdisk/cfdisk.c:830
-msgid "Partition ends before sector 0"
-msgstr "分割區結尾小於磁區 0"
+#: disk-utils/fsck.c:1567 misc-utils/kill.c:327 misc-utils/kill.c:343
+#, fuzzy, c-format
+msgid "option '%s' requires an argument"
+msgstr "%s 需要一個引數"
-#: fdisk/cfdisk.c:835
-msgid "Partition begins after end-of-disk"
-msgstr "分割區開端大於磁碟末端"
+#: disk-utils/fsck.c:1598
+#, fuzzy, c-format
+msgid "invalid argument of -r: %d"
+msgstr "無效的引數：%s"
-#: fdisk/cfdisk.c:840
-msgid "Partition ends after end-of-disk"
-msgstr "分割區結尾大於磁碟末端"
+#: disk-utils/fsck.c:1641
+#, fuzzy
+msgid "the -l option can be used with one device only -- ignore"
+msgstr "-l 選項可以被使用與一個裝置只有 -- 忽略"
-#: fdisk/cfdisk.c:864
-msgid "logical partitions not in disk order"
-msgstr "邏輯分割區未按磁碟順序"
+#: disk-utils/fsck.cramfs.c:111
+#, fuzzy, c-format
+msgid " %s [options] <file>\n"
+msgstr " %s [選項] [<file>]\n"
-#: fdisk/cfdisk.c:867
-msgid "logical partitions overlap"
-msgstr "邏輯分割區重疊"
+#: disk-utils/fsck.cramfs.c:114
+msgid "Check and repair a compressed ROM filesystem.\n"
+msgstr ""
-#: fdisk/cfdisk.c:871
-msgid "enlarged logical partitions overlap"
-msgstr "擴大的邏輯分割區重疊"
+#: disk-utils/fsck.cramfs.c:117
+msgid " -a for compatibility only, ignored\n"
+msgstr ""
-#: fdisk/cfdisk.c:901
-msgid ""
-"!!!! Internal error creating logical drive with no extended partition !!!!"
-msgstr "!!!! 內部錯誤! 新增邏輯磁碟沒有用於擴展分割區 !!!!"
+#: disk-utils/fsck.cramfs.c:118
+#, fuzzy
+msgid " -v, --verbose be more verbose\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: fdisk/cfdisk.c:912 fdisk/cfdisk.c:924
-msgid ""
-"Cannot create logical drive here -- would create two extended partitions"
-msgstr "無法在此新增邏輯磁碟 -- 如此將造成二個擴展分割區"
+#: disk-utils/fsck.cramfs.c:119
+msgid " -y for compatibility only, ignored\n"
+msgstr ""
-#: fdisk/cfdisk.c:1058
-msgid "Menu item too long. Menu may look odd."
-msgstr "選單項目太長，選單看起來會很奇怪。"
+#: disk-utils/fsck.cramfs.c:120
+msgid " -b, --blocksize <size> use this blocksize, defaults to page size\n"
+msgstr ""
-#: fdisk/cfdisk.c:1173
-msgid "Illegal key"
-msgstr "無效按鍵"
+#: disk-utils/fsck.cramfs.c:121
+msgid " --extract[=<dir>] test uncompression, optionally extract into <dir>\n"
+msgstr ""
-#: fdisk/cfdisk.c:1198
-msgid "Press a key to continue"
-msgstr "按任何鍵繼續"
+#: disk-utils/fsck.cramfs.c:158
+#, c-format
+msgid "ioctl failed: unable to determine device size: %s"
+msgstr "ioctl 失敗：無法決定裝置大小：%s"
-#: fdisk/cfdisk.c:1245 fdisk/cfdisk.c:1871 fdisk/cfdisk.c:2403
-#: fdisk/cfdisk.c:2405
-msgid "Primary"
-msgstr "主è¦\81ç\9a\84"
+#: disk-utils/fsck.cramfs.c:164
+#, c-format
+msgid "not a block device or file: %s"
+msgstr "ä¸\8dæ\98¯å\8d\80å¡\8aè£\9dç½®æ\88\96æª\94æ¡\88ï¼\9a%s"
-#: fdisk/cfdisk.c:1245
-msgid "Create a new primary partition"
-msgstr "æ\96°å¢\9eä¸\80å\80\8b主è¦\81å\88\86å\89²å\8d\80"
+#: disk-utils/fsck.cramfs.c:167 disk-utils/fsck.cramfs.c:203
+msgid "file length too short"
+msgstr "æª\94æ¡\88é\95·åº¦å¤ªç\9f"
-#: fdisk/cfdisk.c:1246 fdisk/cfdisk.c:1871 fdisk/cfdisk.c:2402
-#: fdisk/cfdisk.c:2405
-msgid "Logical"
-msgstr "邏輯的"
+#: disk-utils/fsck.cramfs.c:176 disk-utils/fsck.cramfs.c:231
+#: disk-utils/fsck.cramfs.c:251 libfdisk/src/bsd.c:719 libfdisk/src/bsd.c:901
+#: login-utils/last.c:203 login-utils/last.c:237 sys-utils/fallocate.c:203
+#, fuzzy, c-format
+msgid "seek on %s failed"
+msgstr "搜尋失敗"
-#: fdisk/cfdisk.c:1246
-msgid "Create a new logical partition"
-msgstr "æ\96°å¢\9eä¸\80å\80\8bé\82\8f輯å\88\86å\89²å\8d\80"
+#: disk-utils/fsck.cramfs.c:182 disk-utils/fsck.cramfs.c:184
+msgid "superblock magic not found"
+msgstr "æ\89¾ä¸\8då\88°è¶\85å\8d\80å¡\8aç\9a\84é\94è¡\93æ¨\99è¨\98"
-#: fdisk/cfdisk.c:1247 fdisk/cfdisk.c:1302 fdisk/cfdisk.c:2076
-msgid "Cancel"
-msgstr "取消"
+#: disk-utils/fsck.cramfs.c:187
+#, fuzzy, c-format
+msgid "cramfs endianness is %s\n"
+msgstr "cramfs 尾序是 %s\n"
-#: fdisk/cfdisk.c:1247 fdisk/cfdisk.c:1302
-msgid "Don't create a partition"
-msgstr "不要新增一個分割區"
+#: disk-utils/fsck.cramfs.c:188
+#, fuzzy
+msgid "big"
+msgstr "大"
-#: fdisk/cfdisk.c:1263
-msgid "!!! Internal error !!!"
-msgstr "!!! 內部錯誤 !!!"
+#: disk-utils/fsck.cramfs.c:188
+#, fuzzy
+msgid "little"
+msgstr "小型"
-#: fdisk/cfdisk.c:1266
-msgid "Size (in MB): "
-msgstr "大小 (單位 MB): "
+#: disk-utils/fsck.cramfs.c:192
+msgid "unsupported filesystem features"
+msgstr "不受支援的檔案系統特徵"
-#: fdisk/cfdisk.c:1300
-msgid "Beginning"
-msgstr "開始"
+#: disk-utils/fsck.cramfs.c:196
+#, c-format
+msgid "superblock size (%d) too small"
+msgstr "超區塊大小 (%d) 太小"
-#: fdisk/cfdisk.c:1300
-msgid "Add partition at beginning of free space"
-msgstr "新增分割區於剩餘空間開頭位置"
+#: disk-utils/fsck.cramfs.c:201
+msgid "zero file count"
+msgstr "零個檔案計數"
-#: fdisk/cfdisk.c:1301
-msgid "End"
-msgstr "結束"
+#: disk-utils/fsck.cramfs.c:205
+#, fuzzy
+msgid "file extends past end of filesystem"
+msgstr "警告：檔案延伸超過檔案系統末端\n"
-#: fdisk/cfdisk.c:1301
-msgid "Add partition at end of free space"
-msgstr "新增分割區於剩餘空間末端"
+#: disk-utils/fsck.cramfs.c:207
+#, fuzzy
+msgid "old cramfs format"
+msgstr "警告：舊的 cramfs 格式\n"
-#: fdisk/cfdisk.c:1319
-msgid "No room to create the extended partition"
-msgstr "已無多餘的磁碟空間可開啟擴充分割區"
+#: disk-utils/fsck.cramfs.c:216
+msgid "unable to test CRC: old cramfs format"
+msgstr "無法測試循環冗餘檢查：舊的 cramfs 格式"
-#: fdisk/cfdisk.c:1388
-msgid "No partition table.\n"
-msgstr "無分割表。\n"
+#: disk-utils/fsck.cramfs.c:236
+#, fuzzy, c-format
+msgid "failed to read %<PRIu32> bytes from file %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
-#: fdisk/cfdisk.c:1392
-msgid "No partition table. Starting with zero table."
-msgstr "無分割表。以空的表格開始。"
+#: disk-utils/fsck.cramfs.c:274
+msgid "crc error"
+msgstr "循環冗餘檢查錯誤"
-#: fdisk/cfdisk.c:1402
-msgid "Bad signature on partition table"
-msgstr "分割表上有不當的簽章"
+#: disk-utils/fsck.cramfs.c:304 disk-utils/fsck.minix.c:560
+msgid "seek failed"
+msgstr "搜尋失敗"
-#: fdisk/cfdisk.c:1406
-msgid "Unknown partition table type"
-msgstr "不明的分割表類型"
+#: disk-utils/fsck.cramfs.c:308
+#, fuzzy
+msgid "read romfs failed"
+msgstr "fread 失敗"
-#: fdisk/cfdisk.c:1408
-msgid "Do you wish to start with a zero table [y/N] ?"
-msgstr "æ\82¨æ\83³è¦\81以ä¸\80å\80\8b空ç\9a\84å\88\86å\89²è¡¨é\96\8bå§\8bå\97\8e [y/N] ?"
+#: disk-utils/fsck.cramfs.c:340
+msgid "root inode is not directory"
+msgstr "æ ¹ inode 並é\9d\9eç\9b®é\8c\84"
-#: fdisk/cfdisk.c:1455
-msgid "You specified more cylinders than fit on disk"
-msgstr "您指定了比磁碟上還多的磁柱數"
+#: disk-utils/fsck.cramfs.c:344
+#, c-format
+msgid "bad root offset (%lu)"
+msgstr "不當的根偏移 (%lu)"
-#: fdisk/cfdisk.c:1491
-msgid "Cannot open disk drive"
-msgstr "無法開啟磁碟"
+#: disk-utils/fsck.cramfs.c:362
+msgid "data block too large"
+msgstr "資料區塊太大"
-#: fdisk/cfdisk.c:1493 fdisk/cfdisk.c:1682
-msgid "Opened disk read-only - you have no permission to write"
-msgstr "已開啟磁碟為唯讀 - 您無權限可寫入"
+#: disk-utils/fsck.cramfs.c:366
+#, fuzzy, c-format
+msgid "decompression error: %s"
+msgstr "解壓縮錯誤 %p(%d)：%s"
-#: fdisk/cfdisk.c:1504
-msgid ""
-"Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
-msgstr "警告 !! 偵測到不受支援的 GPT (GUID 分割表)。使用 GNU Parted。"
+#: disk-utils/fsck.cramfs.c:392
+#, fuzzy, c-format
+msgid " hole at %lu (%zu)\n"
+msgstr " 漏洞位於 %ld (%zd)\n"
-#: fdisk/cfdisk.c:1523
-msgid "Cannot get disk size"
-msgstr "無法取得磁碟大小"
+#: disk-utils/fsck.cramfs.c:399 disk-utils/fsck.cramfs.c:551
+#, fuzzy, c-format
+msgid " uncompressing block at %lu to %lu (%lu)\n"
+msgstr " 解壓縮區塊位於 %ld 到 %ld (%ld)\n"
-#: fdisk/cfdisk.c:1549
-msgid "Bad primary partition"
-msgstr "壞的主要分割區"
+#: disk-utils/fsck.cramfs.c:406
+#, c-format
+msgid "non-block (%ld) bytes"
+msgstr "非區塊 (%ld) 位元組"
-#: fdisk/cfdisk.c:1579
-msgid "Bad logical partition"
-msgstr "壞的邏輯分割區"
+#: disk-utils/fsck.cramfs.c:410
+#, c-format
+msgid "non-size (%ld vs %ld) bytes"
+msgstr "非大小 (%ld vs %ld) 位元組"
-#: fdisk/cfdisk.c:1694
-msgid "Warning!! This may destroy data on your disk!"
-msgstr "警告!! 這項操作可能會使您硬碟中的資料消失!"
+#: disk-utils/fsck.cramfs.c:415 disk-utils/fsck.cramfs.c:517
+#: disk-utils/swaplabel.c:109 misc-utils/uuidd.c:369 sys-utils/fallocate.c:411
+#: sys-utils/rfkill.c:560 sys-utils/setpriv.c:634 sys-utils/setpriv.c:657
+#: sys-utils/swapon.c:393 term-utils/script.c:318 term-utils/ttymsg.c:175
+#, c-format
+msgid "write failed: %s"
+msgstr "寫入失敗：%s"
-#: fdisk/cfdisk.c:1698
-msgid ""
-"Are you sure you want to write the partition table to disk? (yes or no): "
-msgstr "您確定要將分割表寫入硬碟中嗎? (yes 或 no):"
+#: disk-utils/fsck.cramfs.c:425
+#, c-format
+msgid "lchown failed: %s"
+msgstr "lchown 失敗：%s"
-#: fdisk/cfdisk.c:1704 sys-utils/lscpu.c:862 sys-utils/lscpu.c:872
+#: disk-utils/fsck.cramfs.c:429
#, c-format
-msgid "no"
-msgstr "否"
+msgid "chown failed: %s"
+msgstr "chown 失敗：%s"
-#: fdisk/cfdisk.c:1706
-msgid "Did not write partition table to disk"
-msgstr "不要將分割表寫入硬碟"
+#: disk-utils/fsck.cramfs.c:434
+#, fuzzy, c-format
+msgid "utimes failed: %s"
+msgstr "utime 失敗：%s"
-#: fdisk/cfdisk.c:1708 sys-utils/lscpu.c:862 sys-utils/lscpu.c:872
+#: disk-utils/fsck.cramfs.c:446
#, c-format
-msgid "yes"
-msgstr "是"
+msgid "directory inode has zero offset and non-zero size: %s"
+msgstr "目錄 inode 有零偏移值和非零大小：%s"
-#: fdisk/cfdisk.c:1712
-msgid "Please enter `yes' or `no'"
-msgstr "請鍵入 `yes' 或 `no'"
+#: disk-utils/fsck.cramfs.c:461
+#, c-format
+msgid "mkdir failed: %s"
+msgstr "mkdir 失敗：%s"
-#: fdisk/cfdisk.c:1716
-msgid "Writing partition table to disk..."
-msgstr "æ£å¯«å\85¥å\88\86å\89²è¡¨å\88°ç¡¬ç¢\9fâ\80¦"
+#: disk-utils/fsck.cramfs.c:477
+msgid "filename length is zero"
+msgstr "æª\94å\90\8dé\95·åº¦ç\82ºé\9b¶"
-#: fdisk/cfdisk.c:1741 fdisk/cfdisk.c:1745
-msgid "Wrote partition table to disk"
-msgstr "已將分割表寫入硬碟"
+#: disk-utils/fsck.cramfs.c:479
+msgid "bad filename length"
+msgstr "不當的檔名長度"
-#: fdisk/cfdisk.c:1743
-msgid ""
-"Wrote partition table, but re-read table failed. Run partprobe(8), kpartx"
-"(8) or reboot to update table."
-msgstr ""
-"已寫入分割表，但重讀失敗。 請執行 partprobe(8)、kpartx(8) 或重新開機以更新分"
-"割表。"
+#: disk-utils/fsck.cramfs.c:485
+msgid "bad inode offset"
+msgstr "不當的 inode 偏移值"
+
+#: disk-utils/fsck.cramfs.c:500
+msgid "file inode has zero offset and non-zero size"
+msgstr "檔案 inode 有零偏移值和非零大小"
-#: fdisk/cfdisk.c:1753
-msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
-msgstr "æ²\92æ\9c\89主è¦\81å\88\86å\89²å\8d\80被æ¨\99è¨\98ç\82ºå\8f¯é\96\8bæ©\9f. DOS MBR ç\84¡æ³\95ç\94±æ¤é\96\8bæ©\9f."
+#: disk-utils/fsck.cramfs.c:503
+msgid "file inode has zero size and non-zero offset"
+msgstr "æª\94æ¡\88 inode æ\9c\89é\9b¶å¤§å°\8få\92\8cé\9d\9eé\9b¶å\81\8f移å\80¼"
-#: fdisk/cfdisk.c:1755
-msgid ""
-"More than one primary partition is marked bootable. DOS MBR cannot boot this."
-msgstr "超過一個主要分割區標記為可開機. DOS MBR 無法由此開機."
+#: disk-utils/fsck.cramfs.c:532
+msgid "symbolic link has zero offset"
+msgstr "符號連結有零偏移值"
-#: fdisk/cfdisk.c:1813 fdisk/cfdisk.c:1932 fdisk/cfdisk.c:2016
-msgid "Enter filename or press RETURN to display on screen: "
-msgstr "鍵入檔名或按 Enter 鍵以顯示於螢幕上: "
+#: disk-utils/fsck.cramfs.c:534
+msgid "symbolic link has zero size"
+msgstr "符號連結有零大小"
-#: fdisk/cfdisk.c:1822 fdisk/cfdisk.c:1940 fdisk/cfdisk.c:2024
+#: disk-utils/fsck.cramfs.c:543
#, c-format
-msgid "Cannot open file '%s'"
-msgstr "無法開啟檔案 '%s'"
+msgid "size error in symlink: %s"
+msgstr "大小錯誤發生於符號連結：%s"
-#: fdisk/cfdisk.c:1833
+#: disk-utils/fsck.cramfs.c:557
#, c-format
-msgid "Disk Drive: %s\n"
-msgstr "硬碟: %s\n"
-
-#: fdisk/cfdisk.c:1835
-msgid "Sector 0:\n"
-msgstr "磁區 0:\n"
+msgid "symlink failed: %s"
+msgstr "符號連結失敗：%s"
-#: fdisk/cfdisk.c:1842
+#: disk-utils/fsck.cramfs.c:570
#, c-format
-msgid "Sector %d:\n"
-msgstr "ç£\81å\8d\80 %d:\n"
+msgid "special file has non-zero offset: %s"
+msgstr "ç\89¹æ®\8aæª\94æ¡\88æ\9c\89é\9d\9eé\9b¶å\81\8f移å\80¼ï¼\9a%s"
-#: fdisk/cfdisk.c:1862
-msgid " None "
-msgstr " 無 "
+#: disk-utils/fsck.cramfs.c:580
+#, c-format
+msgid "fifo has non-zero size: %s"
+msgstr "fifo 有非零大小：%s"
-#: fdisk/cfdisk.c:1864
-msgid " Pri/Log"
-msgstr " 主要/邏輯"
+#: disk-utils/fsck.cramfs.c:586
+#, c-format
+msgid "socket has non-zero size: %s"
+msgstr "通訊端有非零大小：%s"
-#: fdisk/cfdisk.c:1866
-msgid " Primary"
-msgstr " 主要的 "
+#: disk-utils/fsck.cramfs.c:589
+#, c-format
+msgid "bogus mode: %s (%o)"
+msgstr "假造模式：%s (%o)"
-#: fdisk/cfdisk.c:1868
-msgid " Logical"
-msgstr " 邏輯的"
+#: disk-utils/fsck.cramfs.c:598
+#, c-format
+msgid "mknod failed: %s"
+msgstr "mknod 失敗：%s"
-#: fdisk/cfdisk.c:1906 fdisk/fdisk.c:1712 fdisk/fdisk.c:2050
-#: fdisk/fdisksgilabel.c:227 fdisk/fdisksunlabel.c:584 fdisk/sfdisk.c:610
-msgid "Unknown"
-msgstr "未知"
+#: disk-utils/fsck.cramfs.c:630
+#, fuzzy, c-format
+msgid "directory data start (%lu) < sizeof(struct cramfs_super) + start (%zu)"
+msgstr "目錄資料起始 (%ld) < sizeof(struct cramfs_super) + 起始 (%ld)"
-#: fdisk/cfdisk.c:1912 fdisk/cfdisk.c:2380 fdisk/fdisksunlabel.c:32
-msgid "Boot"
-msgstr "可開機"
+#: disk-utils/fsck.cramfs.c:634
+#, fuzzy, c-format
+msgid "directory data end (%lu) != file data start (%lu)"
+msgstr "目錄資料結束 (%ld) != 檔案資料起始 (%ld)"
-#: fdisk/cfdisk.c:1914
-#, c-format
-msgid "(%02X)"
-msgstr "(%02X)"
+#: disk-utils/fsck.cramfs.c:638
+msgid "invalid file data offset"
+msgstr "無效的檔案資料偏移值"
-#: fdisk/cfdisk.c:1916
-msgid "None"
-msgstr "無"
+#: disk-utils/fsck.cramfs.c:686 disk-utils/mkfs.cramfs.c:736
+#, fuzzy
+msgid "invalid blocksize argument"
+msgstr "無效的區塊大小引數"
-#: fdisk/cfdisk.c:1951 fdisk/cfdisk.c:2035
+#: disk-utils/fsck.cramfs.c:709
#, c-format
-msgid "Partition Table for %s\n"
-msgstr "%s 的分割表\n"
-
-#: fdisk/cfdisk.c:1953
-msgid " First Last\n"
-msgstr " 第一個 最後的\n"
+msgid "%s: OK\n"
+msgstr "%s：確定\n"
-#: fdisk/cfdisk.c:1954
-msgid ""
-" # Type Sector Sector Offset Length Filesystem Type (ID) "
-"Flag\n"
-msgstr ""
-" # 類型 磁區 磁區偏移值 長度 檔案系統類型 (ID) 旗"
-"標\n"
-
-#: fdisk/cfdisk.c:1955
-msgid ""
-"-- ------- ----------- ----------- ------ ----------- -------------------- "
-"----\n"
-msgstr ""
-"-- ------- ----------- ----------- ------ ----------- -------------------- "
-"----\n"
-
-#: fdisk/cfdisk.c:2038
-msgid " ---Starting---- ----Ending----- Start Number of\n"
-msgstr " ---開始--- ----結束----- 開始 數量\n"
-
-#: fdisk/cfdisk.c:2039
-msgid " # Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors\n"
-msgstr " # 旗標 磁頭 磁區 磁柱 ID 磁頭 磁區 磁柱 磁區 磁區數 \n"
-
-#: fdisk/cfdisk.c:2040
-msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
-msgstr ""
-"-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
-
-#: fdisk/cfdisk.c:2073
-msgid "Raw"
-msgstr "原始"
+#: disk-utils/fsck.minix.c:185
+#, fuzzy
+msgid "Check the consistency of a Minix filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
-#: fdisk/cfdisk.c:2073
-msgid "Print the table using raw data format"
-msgstr "用原始資料格式顯示分割表"
+#: disk-utils/fsck.minix.c:187
+#, fuzzy
+msgid " -l, --list list all filenames\n"
+msgstr " -l 列出所有檔名\n"
-#: fdisk/cfdisk.c:2074 fdisk/cfdisk.c:2177
-msgid "Sectors"
-msgstr "磁區"
+#: disk-utils/fsck.minix.c:188
+#, fuzzy
+msgid " -a, --auto automatic repair\n"
+msgstr " -a 自動修復\n"
-#: fdisk/cfdisk.c:2074
-msgid "Print the table ordered by sectors"
-msgstr "用磁區數大小顯示分割表"
+#: disk-utils/fsck.minix.c:189
+#, fuzzy
+msgid " -r, --repair interactive repair\n"
+msgstr " -r 互動式修復\n"
-#: fdisk/cfdisk.c:2075
-msgid "Table"
-msgstr "分割表"
+#: disk-utils/fsck.minix.c:190
+#, fuzzy
+msgid " -v, --verbose be verbose\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisk/cfdisk.c:2075
-msgid "Just print the partition table"
-msgstr "只顯示此分割表"
+#: disk-utils/fsck.minix.c:191
+#, fuzzy
+msgid " -s, --super output super-block information\n"
+msgstr " -s 輸出超區塊資訊\n"
-#: fdisk/cfdisk.c:2076
-msgid "Don't print the table"
-msgstr "不顯示此分割表"
+#: disk-utils/fsck.minix.c:192
+#, fuzzy
+msgid " -m, --uncleared activate mode not cleared warnings\n"
+msgstr " -m 啟用模式無法清空的警告\n"
-#: fdisk/cfdisk.c:2104
-msgid "Help Screen for cfdisk"
-msgstr "cfdisk 的說明畫面"
+#: disk-utils/fsck.minix.c:193
+#, fuzzy
+msgid " -f, --force force check\n"
+msgstr " -f 強制檢查\n"
-#: fdisk/cfdisk.c:2106
-msgid "This is cfdisk, a curses based disk partitioning program, which"
-msgstr "本程式 cfdisk，是一個以游標操作為基礎的硬碟分割程式，"
+#. TRANSLATORS: these yes no questions uses rpmatch(), and should be
+#. * translated.
+#: disk-utils/fsck.minix.c:252
+#, fuzzy, c-format
+msgid "%s (y/n)? "
+msgstr "%s (y/n)？"
-#: fdisk/cfdisk.c:2107
-msgid "allows you to create, delete and modify partitions on your hard"
-msgstr "可供您新增、刪除和修改硬碟中的分割區"
+#: disk-utils/fsck.minix.c:252
+#, fuzzy, c-format
+msgid "%s (n/y)? "
+msgstr "%s (n/y)？"
-#: fdisk/cfdisk.c:2108
-msgid "disk drive."
-msgstr "。"
+#: disk-utils/fsck.minix.c:269
+#, fuzzy, c-format
+msgid "y\n"
+msgstr "y\n"
-#: fdisk/cfdisk.c:2110
-msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
-msgstr "著作權©1994-1999 Kevin E.Martin & aeb"
+#: disk-utils/fsck.minix.c:271
+#, fuzzy, c-format
+msgid "n\n"
+msgstr "n\n"
-#: fdisk/cfdisk.c:2112
-msgid "Command Meaning"
-msgstr "按鍵命令 意義"
+#: disk-utils/fsck.minix.c:287
+#, c-format
+msgid "%s is mounted.\t "
+msgstr "%s 已掛載。\t"
-#: fdisk/cfdisk.c:2113
-msgid "------- -------"
-msgstr "------- -------"
+#: disk-utils/fsck.minix.c:289
+msgid "Do you really want to continue"
+msgstr "您真的要繼續嗎？"
-#: fdisk/cfdisk.c:2114
-msgid " b Toggle bootable flag of the current partition"
-msgstr " b 切換目前分割區的開機屬性旗標"
+#: disk-utils/fsck.minix.c:293
+#, c-format
+msgid "check aborted.\n"
+msgstr "已放棄檢查。\n"
-#: fdisk/cfdisk.c:2115
-msgid " d Delete the current partition"
-msgstr " d 刪除目前的分割區"
+#: disk-utils/fsck.minix.c:319 disk-utils/fsck.minix.c:340
+#, c-format
+msgid "Zone nr < FIRSTZONE in file `%s'."
+msgstr "區域 nr < 檔案「%s」中的 FIRSTZONE。"
-#: fdisk/cfdisk.c:2116
-msgid " g Change cylinders, heads, sectors-per-track parameters"
-msgstr " g 變更磁柱、磁頭、每一磁軌磁區數各項參數"
+#: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:343
+#, c-format
+msgid "Zone nr >= ZONES in file `%s'."
+msgstr "區域 nr >= 檔案「%s」中的 ZONES。"
-#: fdisk/cfdisk.c:2117
-msgid " WARNING: This option should only be used by people who"
-msgstr " 警告: 此選項只適用於那些"
+#: disk-utils/fsck.minix.c:326 disk-utils/fsck.minix.c:347
+msgid "Remove block"
+msgstr "移除區塊"
-#: fdisk/cfdisk.c:2118
-msgid " know what they are doing."
-msgstr " 知道他自己在做什麼的人。"
+#: disk-utils/fsck.minix.c:363
+#, c-format
+msgid "Read error: unable to seek to block in file '%s'\n"
+msgstr "讀取錯誤：無法在檔案「%s」中搜尋到區塊\n"
-#: fdisk/cfdisk.c:2119
-msgid " h Print this screen"
-msgstr " h 顯示本說明畫面"
+#: disk-utils/fsck.minix.c:369
+#, c-format
+msgid "Read error: bad block in file '%s'\n"
+msgstr "讀取錯誤：在檔案「%s」中有不良區塊\n"
-#: fdisk/cfdisk.c:2120
-msgid " m Maximize disk usage of the current partition"
-msgstr " m 將分割區的用量最大化"
+#: disk-utils/fsck.minix.c:381
+#, c-format
+msgid ""
+"Internal error: trying to write bad block\n"
+"Write request ignored\n"
+msgstr ""
+"內部錯誤：嘗試寫入不良區塊\n"
+"寫入要求已忽略\n"
-#: fdisk/cfdisk.c:2121
-msgid " Note: This may make the partition incompatible with"
-msgstr " 注意: 這將使分割區不相容於"
+#: disk-utils/fsck.minix.c:387
+msgid "seek failed in write_block"
+msgstr "write_block 時搜尋失敗"
-#: fdisk/cfdisk.c:2122
-msgid " DOS, OS/2, ..."
-msgstr " DOS, OS/2,…"
+#: disk-utils/fsck.minix.c:390
+#, c-format
+msgid "Write error: bad block in file '%s'\n"
+msgstr "寫入錯誤：在檔案「%s」中有不良區塊\n"
-#: fdisk/cfdisk.c:2123
-msgid " n Create new partition from free space"
-msgstr " n 由剩餘空間中新增一塊分割區"
+#: disk-utils/fsck.minix.c:424
+#, fuzzy, c-format
+msgid "Warning: block out of range\n"
+msgstr "警告：inode 數量太大。\n"
-#: fdisk/cfdisk.c:2124
-msgid " p Print partition table to the screen or to a file"
-msgstr " p 顯示分割表於螢幕或輸出至檔案"
+#: disk-utils/fsck.minix.c:511
+msgid "seek failed in write_super_block"
+msgstr "write_super_block 時搜尋失敗"
-#: fdisk/cfdisk.c:2125
-msgid " There are several different formats for the partition"
-msgstr " 這裡有不同的分割區格式"
+#: disk-utils/fsck.minix.c:513
+msgid "unable to write super-block"
+msgstr "無法寫入 super-block"
-#: fdisk/cfdisk.c:2126
-msgid " that you can choose from:"
-msgstr " 以下您可以選擇:"
+#: disk-utils/fsck.minix.c:526
+msgid "Unable to write inode map"
+msgstr "無法寫入 inode 對映"
-#: fdisk/cfdisk.c:2127
-msgid " r - Raw data (exactly what would be written to disk)"
-msgstr " r - 原始資料 (和您寫入硬碟中的一樣)"
+#: disk-utils/fsck.minix.c:529
+msgid "Unable to write zone map"
+msgstr "無法寫入區域對映"
-#: fdisk/cfdisk.c:2128
-msgid " s - Table ordered by sectors"
-msgstr " s - 分割表以磁區數排列"
+#: disk-utils/fsck.minix.c:532
+msgid "Unable to write inodes"
+msgstr "無法寫入 inodes"
-#: fdisk/cfdisk.c:2129
-msgid " t - Table in raw format"
-msgstr " t - 分割表以原始格式顯示"
+#: disk-utils/fsck.minix.c:564
+msgid "unable to alloc buffer for superblock"
+msgstr "無法配置緩衝區給超區塊"
-#: fdisk/cfdisk.c:2130
-msgid " q Quit program without writing partition table"
-msgstr " q 離開本程式並且不寫入分割表"
+#: disk-utils/fsck.minix.c:567
+msgid "unable to read super block"
+msgstr "無法讀取超區塊"
-#: fdisk/cfdisk.c:2131
-msgid " t Change the filesystem type"
-msgstr " t 變更檔案系統的類型"
+#: disk-utils/fsck.minix.c:589
+msgid "bad magic number in super-block"
+msgstr "超區塊中有不當的魔術數字"
-#: fdisk/cfdisk.c:2132
-msgid " u Change units of the partition size display"
-msgstr " u 變更分割區大小的顯示單位"
+#: disk-utils/fsck.minix.c:591
+msgid "Only 1k blocks/zones supported"
+msgstr "只有支援 1k 區塊/區域"
-#: fdisk/cfdisk.c:2133
-msgid " Rotates through MB, sectors and cylinders"
-msgstr " 循環顯示 MB、磁區數和磁柱數"
+#: disk-utils/fsck.minix.c:593
+#, fuzzy
+msgid "bad s_ninodes field in super-block"
+msgstr "超區塊中有不當的 s_imap_blocks 欄位"
-#: fdisk/cfdisk.c:2134
-msgid " W Write partition table to disk (must enter upper case W)"
-msgstr " W 寫入分割表 (寫入一定要用大寫 W)"
+#: disk-utils/fsck.minix.c:595
+msgid "bad s_imap_blocks field in super-block"
+msgstr "超區塊中有不當的 s_imap_blocks 欄位"
-#: fdisk/cfdisk.c:2135
-msgid " Since this might destroy data on the disk, you must"
-msgstr " 因為這將會使您的硬碟中的資料消失，您必須"
+#: disk-utils/fsck.minix.c:597
+#, fuzzy
+msgid "bad s_firstdatazone field in super-block"
+msgstr "超區塊中有不當的 s_imap_blocks 欄位"
-#: fdisk/cfdisk.c:2136
-msgid " either confirm or deny the write by entering `yes' or"
-msgstr " 明確地回答 'yes' 代表寫入，若不要寫入請回答"
+#: disk-utils/fsck.minix.c:600
+msgid "bad s_zmap_blocks field in super-block"
+msgstr "超區塊中有不當的 s_zmap_blocks 欄位"
-#: fdisk/cfdisk.c:2137
-msgid " `no'"
-msgstr " `no'"
+#: disk-utils/fsck.minix.c:616
+msgid "Unable to allocate buffer for inode map"
+msgstr "無法配置 inode 對映緩衝區"
-#: fdisk/cfdisk.c:2138
-msgid "Up Arrow Move cursor to the previous partition"
-msgstr "向上鍵 移動往上鍵可移至上一個分割區"
+#: disk-utils/fsck.minix.c:619
+msgid "Unable to allocate buffer for zone map"
+msgstr "無法配置區域對映緩衝區"
-#: fdisk/cfdisk.c:2139
-msgid "Down Arrow Move cursor to the next partition"
-msgstr "向下鍵 移動往下鍵可移至下一個分割區"
+#: disk-utils/fsck.minix.c:622
+msgid "Unable to allocate buffer for inodes"
+msgstr "無法配置 inodes 緩衝區"
-#: fdisk/cfdisk.c:2140
-msgid "CTRL-L Redraws the screen"
-msgstr "CTRL-L 重新整理畫面(以免有殘影)"
+#: disk-utils/fsck.minix.c:625
+msgid "Unable to allocate buffer for inode count"
+msgstr "無法配置 inode 計數緩衝區"
-#: fdisk/cfdisk.c:2141
-msgid " ? Print this screen"
-msgstr " ? 顯示此畫面"
+#: disk-utils/fsck.minix.c:628
+msgid "Unable to allocate buffer for zone count"
+msgstr "無法配置區域計數緩衝區"
-#: fdisk/cfdisk.c:2143
-msgid "Note: All of the commands can be entered with either upper or lower"
-msgstr "注意: 以上所有的按鍵命令均不區分大小寫"
+#: disk-utils/fsck.minix.c:632
+msgid "Unable to read inode map"
+msgstr "無法讀取 inode 對映"
-#: fdisk/cfdisk.c:2144
-msgid "case letters (except for Writes)."
-msgstr "(除了 '寫入' 之外)。"
+#: disk-utils/fsck.minix.c:636
+msgid "Unable to read zone map"
+msgstr "無法讀取區域對映"
-#: fdisk/cfdisk.c:2175 fdisk/fdisksunlabel.c:200
-msgid "Cylinders"
-msgstr "ç£\81æ\9f±"
+#: disk-utils/fsck.minix.c:640
+msgid "Unable to read inodes"
+msgstr "ç\84¡æ³\95è®\80å\8f\96 inodes"
-#: fdisk/cfdisk.c:2175
-msgid "Change cylinder geometry"
-msgstr "變更磁柱結構"
+#: disk-utils/fsck.minix.c:642
+#, c-format
+msgid "Warning: Firstzone != Norm_firstzone\n"
+msgstr "警告：Firstzone != Norm_firstzone\n"
-#: fdisk/cfdisk.c:2176 fdisk/fdisksunlabel.c:198
-msgid "Heads"
-msgstr "磁頭"
+#: disk-utils/fsck.minix.c:647
+#, c-format
+msgid "%ld inodes\n"
+msgstr "%ld inodes\n"
-#: fdisk/cfdisk.c:2176
-msgid "Change head geometry"
-msgstr "變更磁頭結構"
+#: disk-utils/fsck.minix.c:648
+#, c-format
+msgid "%ld blocks\n"
+msgstr "%ld 區塊\n"
-#: fdisk/cfdisk.c:2177
-msgid "Change sector geometry"
-msgstr "變更磁區結構"
+#: disk-utils/fsck.minix.c:649 disk-utils/mkfs.minix.c:568
+#, fuzzy, c-format
+msgid "Firstdatazone=%jd (%jd)\n"
+msgstr "第一資料區=%ld (%ld)\n"
-#: fdisk/cfdisk.c:2178
-msgid "Done"
-msgstr "完成"
+#: disk-utils/fsck.minix.c:651
+#, c-format
+msgid "Zonesize=%d\n"
+msgstr "區域大小=%d\n"
-#: fdisk/cfdisk.c:2178
-msgid "Done with changing geometry"
-msgstr "變更結構完成"
+#: disk-utils/fsck.minix.c:652
+#, fuzzy, c-format
+msgid "Maxsize=%zu\n"
+msgstr "最大大小=%ld\n"
-#: fdisk/cfdisk.c:2191
-msgid "Enter the number of cylinders: "
-msgstr "鍵入磁柱數: "
+#: disk-utils/fsck.minix.c:654
+#, c-format
+msgid "Filesystem state=%d\n"
+msgstr "檔案系統狀態=%d\n"
-#: fdisk/cfdisk.c:2202 fdisk/cfdisk.c:2779
-msgid "Illegal cylinders value"
-msgstr "磁柱數值不合法"
+#: disk-utils/fsck.minix.c:655
+#, fuzzy, c-format
+msgid ""
+"namelen=%zd\n"
+"\n"
+msgstr ""
+"namelen=%zd\n"
+"\n"
-#: fdisk/cfdisk.c:2208
-msgid "Enter the number of heads: "
-msgstr "鍵入磁頭數字: "
+#: disk-utils/fsck.minix.c:670 disk-utils/fsck.minix.c:720
+#, c-format
+msgid "Inode %d marked unused, but used for file '%s'\n"
+msgstr "Inode %d 標記為未使用，但是卻用於檔案「%s」\n"
-#: fdisk/cfdisk.c:2215 fdisk/cfdisk.c:2789
-msgid "Illegal heads value"
-msgstr "磁頭數值不合法"
+#: disk-utils/fsck.minix.c:673 disk-utils/fsck.minix.c:723
+msgid "Mark in use"
+msgstr "標記為使用中"
-#: fdisk/cfdisk.c:2221
-msgid "Enter the number of sectors per track: "
-msgstr "鍵入每一磁軌的磁區數: "
+#: disk-utils/fsck.minix.c:695 disk-utils/fsck.minix.c:743
+#, c-format
+msgid "The file `%s' has mode %05o\n"
+msgstr "檔案「%s」具有模式 %05o\n"
-#: fdisk/cfdisk.c:2228 fdisk/cfdisk.c:2796
-msgid "Illegal sectors value"
-msgstr "磁區數不合法"
+#: disk-utils/fsck.minix.c:702 disk-utils/fsck.minix.c:749
+#, c-format
+msgid "Warning: inode count too big.\n"
+msgstr "警告：inode 數量太大。\n"
-#: fdisk/cfdisk.c:2331
-msgid "Enter filesystem type: "
-msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+#: disk-utils/fsck.minix.c:761 disk-utils/fsck.minix.c:769
+msgid "root inode isn't a directory"
+msgstr "根 inode 並非目錄"
-#: fdisk/cfdisk.c:2349
-msgid "Cannot change FS Type to empty"
-msgstr "無法變更檔案系統類型為空"
+#: disk-utils/fsck.minix.c:781 disk-utils/fsck.minix.c:812
+#, c-format
+msgid "Block has been used before. Now in file `%s'."
+msgstr "區塊於之前已使用。現在屬於檔案「%s」。"
-#: fdisk/cfdisk.c:2351
-msgid "Cannot change FS Type to extended"
-msgstr "無法變更檔案系統類型為擴展的"
+#: disk-utils/fsck.minix.c:783 disk-utils/fsck.minix.c:814
+#: disk-utils/fsck.minix.c:1149 disk-utils/fsck.minix.c:1158
+#: disk-utils/fsck.minix.c:1205 disk-utils/fsck.minix.c:1214
+msgid "Clear"
+msgstr "清除"
-#: fdisk/cfdisk.c:2382
+#: disk-utils/fsck.minix.c:793 disk-utils/fsck.minix.c:824
#, c-format
-msgid "Unk(%02X)"
-msgstr "Unk(%02X)"
+msgid "Block %d in file `%s' is marked not in use."
+msgstr "檔案「%2$s」中的 區塊 %1$d 已標記為未被使用。"
-#: fdisk/cfdisk.c:2385 fdisk/cfdisk.c:2388
-msgid ", NC"
-msgstr ", NC"
+#: disk-utils/fsck.minix.c:795 disk-utils/fsck.minix.c:826
+msgid "Correct"
+msgstr "修正"
-#: fdisk/cfdisk.c:2393 fdisk/cfdisk.c:2396
-msgid "NC"
-msgstr "NC"
+#: disk-utils/fsck.minix.c:965 disk-utils/fsck.minix.c:1039
+#, c-format
+msgid "The directory '%s' contains a bad inode number for file '%.*s'."
+msgstr "目錄「%s」含有不當的 inode 編號於檔案「%.*s」。"
-#: fdisk/cfdisk.c:2404
-msgid "Pri/Log"
-msgstr "主要/邏輯"
+#: disk-utils/fsck.minix.c:967 disk-utils/fsck.minix.c:1041
+msgid " Remove"
+msgstr " 移除"
-#: fdisk/cfdisk.c:2411
+#: disk-utils/fsck.minix.c:983 disk-utils/fsck.minix.c:1057
#, c-format
-msgid "Unknown (%02X)"
-msgstr "未知的 (%02X)"
+msgid "%s: bad directory: '.' isn't first\n"
+msgstr "%s：不當的目錄：「.」不是第一個\n"
-#: fdisk/cfdisk.c:2480
+#: disk-utils/fsck.minix.c:992 disk-utils/fsck.minix.c:1066
#, c-format
-msgid "Disk Drive: %s"
-msgstr "硬碟: %s"
+msgid "%s: bad directory: '..' isn't second\n"
+msgstr "%s：不當的目錄：「..」不是第二個\n"
-#: fdisk/cfdisk.c:2487
-#, c-format
-msgid "Size: %lld bytes, %lld MB"
-msgstr "大小: %lld 位元組, %lld MB"
+#: disk-utils/fsck.minix.c:1100 disk-utils/fsck.minix.c:1123
+msgid "internal error"
+msgstr "內部錯誤"
-#: fdisk/cfdisk.c:2490
+#: disk-utils/fsck.minix.c:1103 disk-utils/fsck.minix.c:1126
#, c-format
-msgid "Size: %lld bytes, %lld.%lld GB"
-msgstr "大小: %lld 位元組, %lld.%lld GB"
+msgid "%s: bad directory: size < 32"
+msgstr "%s：不當的目錄：大小 < 32"
-#: fdisk/cfdisk.c:2494
-#, c-format
-msgid "Heads: %d Sectors per Track: %d Cylinders: %lld"
-msgstr "磁頭數: %d 每一磁軌的磁區數: %d 磁柱數: %lld"
+#: disk-utils/fsck.minix.c:1109
+#, fuzzy, c-format
+msgid "%s: bad directory: invalid i_zone, use --repair to fix\n"
+msgstr "%s：不當的目錄：「.」不是第一個\n"
-#: fdisk/cfdisk.c:2498 login-utils/chfn.c:246 login-utils/chfn.c:326
-msgid "Name"
-msgstr "å\90\8d稱"
+#: disk-utils/fsck.minix.c:1138
+msgid "seek failed in bad_zone"
+msgstr "å\9c¨æ\90\8dæ¯\80å\8d\80å\9f\9fä¸æ\90\9cå°\8b失æ\95\97"
-#: fdisk/cfdisk.c:2499
-msgid "Flags"
-msgstr "屬性旗標"
+#: disk-utils/fsck.minix.c:1148 disk-utils/fsck.minix.c:1204
+#, fuzzy, c-format
+msgid "Inode %lu mode not cleared."
+msgstr "Inode %lu 模式無法清空。"
-#: fdisk/cfdisk.c:2500
-msgid "Part Type"
-msgstr "分割區類型"
+#: disk-utils/fsck.minix.c:1157 disk-utils/fsck.minix.c:1213
+#, fuzzy, c-format
+msgid "Inode %lu not used, marked used in the bitmap."
+msgstr "Inode %lu 未使用，標記的已用於位元圖。"
-#: fdisk/cfdisk.c:2501
-msgid "FS Type"
-msgstr "檔案系統類型"
+#: disk-utils/fsck.minix.c:1163 disk-utils/fsck.minix.c:1219
+#, fuzzy, c-format
+msgid "Inode %lu used, marked unused in the bitmap."
+msgstr "Inode %lu 使用，標記的未使用的在中位元圖。"
-#: fdisk/cfdisk.c:2502
-msgid "[Label]"
-msgstr "[標記名稱]"
+#: disk-utils/fsck.minix.c:1164 disk-utils/fsck.minix.c:1220
+msgid "Set"
+msgstr "設定"
-#: fdisk/cfdisk.c:2504
-msgid " Sectors"
-msgstr " 磁區"
+#: disk-utils/fsck.minix.c:1168 disk-utils/fsck.minix.c:1224
+#, fuzzy, c-format
+msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
+msgstr "Inode %lu (模式=%07o)，inlinks=%d(_N)，計數=%d。"
-#: fdisk/cfdisk.c:2506
-msgid " Cylinders"
-msgstr " 磁柱"
+#: disk-utils/fsck.minix.c:1171 disk-utils/fsck.minix.c:1227
+msgid "Set i_nlinks to count"
+msgstr "設定 in_links 加入計數"
-#: fdisk/cfdisk.c:2508
-msgid " Size (MB)"
-msgstr " 大小 (MB)"
+#: disk-utils/fsck.minix.c:1183 disk-utils/fsck.minix.c:1239
+#, fuzzy, c-format
+msgid "Zone %lu: marked in use, no file uses it."
+msgstr "區 %lu：標記的在中使用，沒有檔案使用它。"
-#: fdisk/cfdisk.c:2510
-msgid " Size (GB)"
-msgstr " 大小 (GB)"
+#: disk-utils/fsck.minix.c:1185 disk-utils/fsck.minix.c:1241
+msgid "Unmark"
+msgstr "取消標記"
-#: fdisk/cfdisk.c:2532
-msgid "No more partitions"
-msgstr "已無多餘的分割區"
+#: disk-utils/fsck.minix.c:1190 disk-utils/fsck.minix.c:1246
+#, fuzzy, c-format
+msgid "Zone %lu: in use, counted=%d\n"
+msgstr "區 %lu：在中使用，計數=%d\n"
-#: fdisk/cfdisk.c:2565
-msgid "Bootable"
-msgstr "可開機"
+#: disk-utils/fsck.minix.c:1193 disk-utils/fsck.minix.c:1249
+#, fuzzy, c-format
+msgid "Zone %lu: not in use, counted=%d\n"
+msgstr "區 %lu：不在使用中，計數=%d\n"
-#: fdisk/cfdisk.c:2565
-msgid "Toggle bootable flag of the current partition"
-msgstr "切換目前分割區的屬性旗標"
+#: disk-utils/fsck.minix.c:1299
+msgid "bad inode size"
+msgstr "不當的 inode 大小"
-#: fdisk/cfdisk.c:2566
-msgid "Delete"
-msgstr "刪除"
+#: disk-utils/fsck.minix.c:1301
+msgid "bad v2 inode size"
+msgstr "不當的 v2 inode 大小"
-#: fdisk/cfdisk.c:2566
-msgid "Delete the current partition"
-msgstr "刪除目前的分割區"
+#: disk-utils/fsck.minix.c:1345
+msgid "need terminal for interactive repairs"
+msgstr "需要終端機以進行互動式修復"
-#: fdisk/cfdisk.c:2567
-msgid "Geometry"
-msgstr "結構"
+#: disk-utils/fsck.minix.c:1349
+#, fuzzy, c-format
+msgid "cannot open %s: %s"
+msgstr "無法開啟 %s：%s"
-#: fdisk/cfdisk.c:2567
-msgid "Change disk geometry (experts only)"
-msgstr "變更磁碟結構 (老手適用)"
+#: disk-utils/fsck.minix.c:1360
+#, c-format
+msgid "%s is clean, no check.\n"
+msgstr "%s 已清除，不做檢查。\n"
-#: fdisk/cfdisk.c:2568
-msgid "Help"
-msgstr "求助"
-
-#: fdisk/cfdisk.c:2568
-msgid "Print help screen"
-msgstr "顯示說明畫面"
-
-#: fdisk/cfdisk.c:2569
-msgid "Maximize"
-msgstr "最大化"
-
-#: fdisk/cfdisk.c:2569
-msgid "Maximize disk usage of the current partition (experts only)"
-msgstr "使目前的分割區的磁碟使用最大化 (老手適用)"
-
-#: fdisk/cfdisk.c:2570
-msgid "New"
-msgstr "新增"
-
-#: fdisk/cfdisk.c:2570
-msgid "Create new partition from free space"
-msgstr "從剩餘空間新增一個新的分割區"
-
-#: fdisk/cfdisk.c:2571
-msgid "Print"
-msgstr "印出"
-
-#: fdisk/cfdisk.c:2571
-msgid "Print partition table to the screen or to a file"
-msgstr "印出分割表至螢幕或檔案"
+#: disk-utils/fsck.minix.c:1363
+#, c-format
+msgid "Forcing filesystem check on %s.\n"
+msgstr "強制檢查 %s 檔案系統。\n"
-#: fdisk/cfdisk.c:2572
-msgid "Quit"
-msgstr "離開"
+#: disk-utils/fsck.minix.c:1365
+#, c-format
+msgid "Filesystem on %s is dirty, needs checking.\n"
+msgstr "%s 檔案系統不乾淨，需要檢查。\n"
-#: fdisk/cfdisk.c:2572
-msgid "Quit program without writing partition table"
-msgstr "離開本程式且不寫入分割表"
+#: disk-utils/fsck.minix.c:1397
+#, c-format
+msgid ""
+"\n"
+"%6ld inodes used (%ld%%)\n"
+msgstr ""
+"\n"
+"%6ld inodes 已使用 (%ld%%)\n"
-#: fdisk/cfdisk.c:2573
-msgid "Type"
-msgstr "類型"
+#: disk-utils/fsck.minix.c:1403
+#, c-format
+msgid "%6ld zones used (%ld%%)\n"
+msgstr "%6ld 區域已使用 (%ld%%)\n"
-#: fdisk/cfdisk.c:2573
-msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
-msgstr "變更檔案系統的類型 (DOS, Linux, swap, OS/2 等等)"
+#: disk-utils/fsck.minix.c:1405
+#, c-format
+msgid ""
+"\n"
+"%6d regular files\n"
+"%6d directories\n"
+"%6d character device files\n"
+"%6d block device files\n"
+"%6d links\n"
+"%6d symbolic links\n"
+"------\n"
+"%6d files\n"
+msgstr ""
+"\n"
+"%6d 標準檔案\n"
+"%6d 目錄\n"
+"%6d 字元裝置檔案\n"
+"%6d 區塊裝置檔案\n"
+"%6d 鏈結\n"
+"%6d 符號連結\n"
+"------\n"
+"%6d 檔案\n"
-#: fdisk/cfdisk.c:2574
-msgid "Units"
-msgstr "單位"
+#: disk-utils/fsck.minix.c:1419
+#, c-format
+msgid ""
+"----------------------------\n"
+"FILE SYSTEM HAS BEEN CHANGED\n"
+"----------------------------\n"
+msgstr ""
+"----------------------------\n"
+"檔案系統已變更\n"
+"----------------------------\n"
-#: fdisk/cfdisk.c:2574
-msgid "Change units of the partition size display (MB, sect, cyl)"
-msgstr "變更分割區大小的顯示單位 (用 MB、磁區數或磁柱數)"
+#: disk-utils/fsck.minix.c:1431 disk-utils/mkfs.minix.c:837
+#: disk-utils/mkswap.c:541 disk-utils/partx.c:1066 disk-utils/resizepart.c:115
+#: login-utils/utmpdump.c:392 sys-utils/dmesg.c:675 sys-utils/wdctl.c:386
+#: sys-utils/wdctl.c:446 term-utils/setterm.c:911 text-utils/pg.c:1256
+#, fuzzy
+msgid "write failed"
+msgstr "寫入失敗"
-#: fdisk/cfdisk.c:2575
-msgid "Write"
-msgstr "寫入"
+#: disk-utils/isosize.c:57
+#, c-format
+msgid "%s: might not be an ISO filesystem"
+msgstr ""
-#: fdisk/cfdisk.c:2575
-msgid "Write partition table to disk (this might destroy data)"
-msgstr "寫入分割表至硬碟中 (可能使該分割區中的資料消失!)"
+#: disk-utils/isosize.c:62 disk-utils/isosize.c:64
+#, fuzzy, c-format
+msgid "read error on %s"
+msgstr "讀取錯誤於 %s"
-#: fdisk/cfdisk.c:2622
-msgid "Cannot make this partition bootable"
-msgstr "無法讓這個分割區變成可開機"
+#: disk-utils/isosize.c:75
+#, c-format
+msgid "sector count: %d, sector size: %d\n"
+msgstr "磁區數量：%d, 磁區大小：%d\n"
-#: fdisk/cfdisk.c:2632
-msgid "Cannot delete an empty partition"
-msgstr "無法刪除一個空的分割區"
+#: disk-utils/isosize.c:99
+#, fuzzy, c-format
+msgid " %s [options] <iso9660_image_file> ...\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [選項] iso9660_image_file\n"
-#: fdisk/cfdisk.c:2652 fdisk/cfdisk.c:2654
-msgid "Cannot maximize this partition"
-msgstr "無法將這個分割區最大化"
+#: disk-utils/isosize.c:103
+msgid "Show the length of an ISO-9660 filesystem.\n"
+msgstr ""
-#: fdisk/cfdisk.c:2662
-msgid "This partition is unusable"
-msgstr "這個分割區無法使用"
+#: disk-utils/isosize.c:106
+msgid " -d, --divisor=<number> divide the amount of bytes by <number>\n"
+msgstr ""
-#: fdisk/cfdisk.c:2664
-msgid "This partition is already in use"
-msgstr "這個分割區已在使用中"
+#: disk-utils/isosize.c:107
+#, fuzzy
+msgid " -x, --sectors show sector count and size\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: fdisk/cfdisk.c:2681
-msgid "Cannot change the type of an empty partition"
-msgstr "無法變更一個空分割區的類型"
+#: disk-utils/isosize.c:138
+#, fuzzy
+msgid "invalid divisor argument"
+msgstr "無效的除數引數"
-#: fdisk/cfdisk.c:2725
-msgid "Illegal command"
-msgstr "無效的命令"
+#: disk-utils/mkfs.bfs.c:74
+#, fuzzy, c-format
+msgid "Usage: %s [options] device [block-count]\n"
+msgstr "用法：%s [選項] 裝置 [block-count]\n"
-#: fdisk/cfdisk.c:2735
-#, c-format
-msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
-msgstr "版權©1994-2002 Kevin E. Martin & aeb\n"
+#: disk-utils/mkfs.bfs.c:78
+msgid "Make an SCO bfs filesystem.\n"
+msgstr ""
-#: fdisk/cfdisk.c:2742
-#, c-format
+#: disk-utils/mkfs.bfs.c:80
+#, fuzzy, c-format
msgid ""
"\n"
-"Usage:\n"
-"Print version:\n"
-" %s -v\n"
-"Print partition table:\n"
-" %s -P {r|s|t} [options] device\n"
-"Interactive use:\n"
-" %s [options] device\n"
-"\n"
"Options:\n"
-"-a: Use arrow instead of highlighting;\n"
-"-z: Start with a zero partition table, instead of reading the pt from disk;\n"
-"-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
-" the number of heads and the number of sectors/track.\n"
-"\n"
+" -N, --inodes=NUM specify desired number of inodes\n"
+" -V, --vname=NAME specify volume name\n"
+" -F, --fname=NAME specify file system name\n"
+" -v, --verbose explain what is being done\n"
+" -c this option is silently ignored\n"
+" -l this option is silently ignored\n"
msgstr ""
"\n"
-"用法：\n"
-"印出版本：\n"
-" %s -v\n"
-"印出分割表：\n"
-" %s -P {r|s|t} [選項] 裝置\n"
-"互動式使用：\n"
-" %s [選項] 裝置\n"
-"\n"
"選項：\n"
-"-a: 使用箭頭以代替高亮度顯示；\n"
-"-z: 以零分割表開始，以代替從磁碟讀取分割表；\n"
-"-c C -h H -s S:強制變更內核認為的磁柱數量、\n"
-" 磁頭數量和每一磁軌的磁區數量。\n"
+" -N, --inodes=NUM 指定設想的 inodes 數量\n"
+" -V, --vname=名稱 指定卷冊名稱\n"
+" -F, --fname=名稱 指定檔案系統名稱\n"
+" -v, --verbose 解釋什麼正在是已完成\n"
+" -c 這個選項是寂靜的忽略\n"
+" -l 這個選項是寂靜的忽略\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -V 做為版本必須是只有選項\n"
+" -h, --help 顯示這份說明然後離開\n"
"\n"
-#: fdisk/fdiskaixlabel.c:27
-msgid ""
-"\n"
-"\tThere is a valid AIX label on this disk.\n"
-"\tUnfortunately Linux cannot handle these\n"
-"\tdisks at the moment. Nevertheless some\n"
-"\tadvice:\n"
-"\t1. fdisk will destroy its contents on write.\n"
-"\t2. Be sure that this disk is NOT a still vital\n"
-"\t part of a volume group. (Otherwise you may\n"
-"\t erase the other disks as well, if unmirrored.)\n"
-"\t3. Before deleting this physical volume be sure\n"
-"\t to remove the disk logically from your AIX\n"
-"\t machine. (Otherwise you become an AIXpert)."
-msgstr ""
-"\n"
-"\t這個磁碟具備有效的 AIX 標籤。\n"
-"\t不幸地 Linux 目前無法處理這些\n"
-"\t磁碟。 即使如此還是有一些\n"
-"\t忠告：\n"
-"\t1.fdisk 於寫入時將銷毀它的內容。\n"
-"\t2.請確認這個磁碟並非仍然活躍\n"
-"\t 的卷冊群之一部份。(否則您也許會\n"
-"\t 同時清除了其他磁碟，如果未被鏡射的話)\n"
-"\t3.刪除這個實體卷冊之前請確定，\n"
-"\t 邏輯上從您的 AIX 機器\n"
-"\t 移除磁碟。(除非您成為 AIX 專家)。"
-
-#: fdisk/fdiskbsdlabel.c:121
-#, c-format
-msgid ""
-"\n"
-"BSD label for device: %s\n"
-msgstr ""
-"\n"
-"裝置的 BSD 標籤：%s\n"
+#: disk-utils/mkfs.bfs.c:139
+#, fuzzy
+msgid "invalid number of inodes"
+msgstr "無效的 inodes 數量"
-#: fdisk/fdiskbsdlabel.c:155
-#, c-format
-msgid "Partition %s has invalid starting sector 0.\n"
-msgstr "分割區 %s 具有無效的開始磁區 0。\n"
+#: disk-utils/mkfs.bfs.c:145
+msgid "volume name too long"
+msgstr "卷冊名稱太長"
+
+#: disk-utils/mkfs.bfs.c:152
+msgid "fsname name too long"
+msgstr "檔案系統名稱太長"
+
+#: disk-utils/mkfs.bfs.c:190
+#, fuzzy
+msgid "invalid block-count"
+msgstr "無效的 block-count"
-#: fdisk/fdiskbsdlabel.c:159
+#: disk-utils/mkfs.bfs.c:198
#, c-format
-msgid "Reading disklabel of %s at sector %d.\n"
-msgstr "於磁區 %2$d 讀取 %1$s 的磁碟標籤。\n"
+msgid "cannot get size of %s"
+msgstr "無法取得 %s 的大小"
-#: fdisk/fdiskbsdlabel.c:169
+#: disk-utils/mkfs.bfs.c:203
#, c-format
-msgid "There is no *BSD partition on %s.\n"
-msgstr "沒有任何 *BSD 分割位於 %s。\n"
+msgid "blocks argument too large, max is %llu"
+msgstr "區塊引數太大，最大是 %llu"
-#: fdisk/fdiskbsdlabel.c:183
-msgid "BSD disklabel command (m for help): "
-msgstr "BSD 磁碟標籤命令 (m 以獲得說明)："
+#: disk-utils/mkfs.bfs.c:218
+msgid "too many inodes - max is 512"
+msgstr "太多 inodes - 最大為 512"
-#: fdisk/fdiskbsdlabel.c:263 fdisk/fdisk.c:2280 fdisk/fdisksgilabel.c:644
-#: fdisk/fdisksunlabel.c:394
+#: disk-utils/mkfs.bfs.c:228
#, c-format
-msgid "First %s"
-msgstr "起初 %s"
+msgid "not enough space, need at least %llu blocks"
+msgstr "沒有足夠的空間，需要至少 %llu 區塊"
-#: fdisk/fdiskbsdlabel.c:270 fdisk/fdisksunlabel.c:451
+#: disk-utils/mkfs.bfs.c:240
#, c-format
-msgid "Last %s or +size or +sizeM or +sizeK"
-msgstr "最後 %s 或 +size 或 +sizeM 或 +sizeK"
+msgid "Device: %s\n"
+msgstr "裝置：%s\n"
-#: fdisk/fdiskbsdlabel.c:297
+#: disk-utils/mkfs.bfs.c:241
#, c-format
-msgid "type: %s\n"
-msgstr "類型：%s\n"
+msgid "Volume: <%-6s>\n"
+msgstr "卷冊：<%-6s>\n"
-#: fdisk/fdiskbsdlabel.c:299
+#: disk-utils/mkfs.bfs.c:242
#, c-format
-msgid "type: %d\n"
-msgstr "類型：%d\n"
+msgid "FSname: <%-6s>\n"
+msgstr "檔案系統名稱：<%-6s>\n"
-#: fdisk/fdiskbsdlabel.c:300
+#: disk-utils/mkfs.bfs.c:243
#, c-format
-msgid "disk: %.*s\n"
-msgstr "磁碟：%.*s\n"
+msgid "BlockSize: %d\n"
+msgstr "區塊大小：%d\n"
-#: fdisk/fdiskbsdlabel.c:301
-#, c-format
-msgid "label: %.*s\n"
-msgstr "標籤：%.*s\n"
+#: disk-utils/mkfs.bfs.c:245
+#, fuzzy, c-format
+msgid "Inodes: %ld (in 1 block)\n"
+msgstr "Inodes：%lu (在中 1 區塊)\n"
-#: fdisk/fdiskbsdlabel.c:302
-#, c-format
-msgid "flags:"
-msgstr "旗標："
+#: disk-utils/mkfs.bfs.c:248
+#, fuzzy, c-format
+msgid "Inodes: %ld (in %llu blocks)\n"
+msgstr "Inodes：%lu (在中 %llu 區塊)\n"
-#: fdisk/fdiskbsdlabel.c:304
-#, c-format
-msgid " removable"
-msgstr " 可移除的"
+#: disk-utils/mkfs.bfs.c:250
+#, fuzzy, c-format
+msgid "Blocks: %llu\n"
+msgstr "區塊：%lld\n"
-#: fdisk/fdiskbsdlabel.c:306
+#: disk-utils/mkfs.bfs.c:251
#, c-format
-msgid " ecc"
-msgstr " ecc"
+msgid "Inode end: %d, Data end: %d\n"
+msgstr "Inode 結束：%d, 資料結束：%d\n"
-#: fdisk/fdiskbsdlabel.c:308
-#, c-format
-msgid " badsect"
-msgstr " 不良磁區"
+#: disk-utils/mkfs.bfs.c:256
+msgid "error writing superblock"
+msgstr "寫入超區塊時發生錯誤"
-#: fdisk/fdiskbsdlabel.c:312
-#, c-format
-msgid "bytes/sector: %ld\n"
-msgstr "位元組/磁區：%ld\n"
+#: disk-utils/mkfs.bfs.c:277
+msgid "error writing root inode"
+msgstr "寫入根 inode 時發生錯誤"
-#: fdisk/fdiskbsdlabel.c:313
-#, c-format
-msgid "sectors/track: %ld\n"
-msgstr "磁區/磁軌：%ld\n"
+#: disk-utils/mkfs.bfs.c:282
+msgid "error writing inode"
+msgstr "寫入 inode 時發生錯誤"
-#: fdisk/fdiskbsdlabel.c:314
-#, c-format
-msgid "tracks/cylinder: %ld\n"
-msgstr "磁軌/磁柱：%ld\n"
+#: disk-utils/mkfs.bfs.c:285
+msgid "seek error"
+msgstr "尋找錯誤"
-#: fdisk/fdiskbsdlabel.c:315
-#, c-format
-msgid "sectors/cylinder: %ld\n"
-msgstr "磁區/磁柱：%ld\n"
+#: disk-utils/mkfs.bfs.c:291
+msgid "error writing . entry"
+msgstr "寫入 . 項目時發生錯誤"
-#: fdisk/fdiskbsdlabel.c:316
-#, c-format
-msgid "cylinders: %ld\n"
-msgstr "磁柱：%ld\n"
+#: disk-utils/mkfs.bfs.c:295
+msgid "error writing .. entry"
+msgstr "寫入 .. 項目時發生錯誤"
-#: fdisk/fdiskbsdlabel.c:317
+#: disk-utils/mkfs.bfs.c:298
#, c-format
-msgid "rpm: %d\n"
-msgstr "rpm：%d\n"
+msgid "error closing %s"
+msgstr "關閉 %s 時發生錯誤"
-#: fdisk/fdiskbsdlabel.c:318
-#, c-format
-msgid "interleave: %d\n"
-msgstr "交錯：%d\n"
+#: disk-utils/mkfs.c:45
+#, fuzzy, c-format
+msgid " %s [options] [-t <type>] [fs-options] <device> [<size>]\n"
+msgstr "用法：%s [選項] [-t 型態 fs-options] 裝置 [大小]\n"
-#: fdisk/fdiskbsdlabel.c:319
-#, c-format
-msgid "trackskew: %d\n"
-msgstr "trackskew：%d\n"
+#: disk-utils/mkfs.c:49
+#, fuzzy
+msgid "Make a Linux filesystem.\n"
+msgstr "檔案系統型態"
-#: fdisk/fdiskbsdlabel.c:320
+#: disk-utils/mkfs.c:52
#, c-format
-msgid "cylinderskew: %d\n"
-msgstr "cylinderskew：%d\n"
+msgid " -t, --type=<type> filesystem type; when unspecified, ext2 is used\n"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:321
+#: disk-utils/mkfs.c:53
#, c-format
-msgid "headswitch: %ld\t\t# milliseconds\n"
-msgstr "headswitch：%ld\t\t# 毫秒\n"
+msgid " fs-options parameters for the real filesystem builder\n"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:323
+#: disk-utils/mkfs.c:54
#, c-format
-msgid "track-to-track seek: %ld\t# milliseconds\n"
-msgstr "軌對軌搜尋：%ld\t# 毫秒\n"
+msgid " <device> path to the device to be used\n"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:325
+#: disk-utils/mkfs.c:55
#, c-format
-msgid "drivedata: "
-msgstr "磁碟資料："
+msgid " <size> number of blocks to be used on the device\n"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:334
+#: disk-utils/mkfs.c:56
#, c-format
msgid ""
-"\n"
-"%d partitions:\n"
+" -V, --verbose explain what is being done;\n"
+" specifying -V more than once will cause a dry-run\n"
msgstr ""
-"\n"
-"%d 分割區：\n"
-
-#: fdisk/fdiskbsdlabel.c:335
-#, c-format
-msgid "# start end size fstype [fsize bsize cpg]\n"
-msgstr "# 開始 結束 大小 檔案系統類型 [fsize bsize cpg]\n"
-#: fdisk/fdiskbsdlabel.c:384 fdisk/fdiskbsdlabel.c:387
+#: disk-utils/mkfs.c:133 include/c.h:252 login-utils/su-common.c:1207
+#: login-utils/sulogin.c:793 login-utils/sulogin.c:797 sys-utils/flock.c:123
+#: sys-utils/rtcwake.c:609
#, c-format
-msgid "Writing disklabel to %s.\n"
-msgstr "å°\87ç£\81ç¢\9fæ¨\99籤寫å\85¥ %sã\80\82\n"
+msgid "failed to execute %s"
+msgstr "å\9f·è¡\8c %s æ\99\82失æ\95\97"
-#: fdisk/fdiskbsdlabel.c:399 fdisk/fdiskbsdlabel.c:401
+#: disk-utils/mkfs.cramfs.c:128
#, c-format
-msgid "%s contains no disklabel.\n"
-msgstr "%s 不含任何磁碟標籤。\n"
-
-#: fdisk/fdiskbsdlabel.c:406
-msgid "Do you want to create a disklabel? (y/n) "
-msgstr "您要建立磁碟標籤嗎？(y/n) "
+msgid " %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:446
-msgid "bytes/sector"
-msgstr "位元組/磁區"
+#: disk-utils/mkfs.cramfs.c:131
+#, fuzzy
+msgid "Make compressed ROM file system."
+msgstr "檔案系統型態"
-#: fdisk/fdiskbsdlabel.c:447
-msgid "sectors/track"
-msgstr "磁區/磁軌"
+#: disk-utils/mkfs.cramfs.c:133
+#, fuzzy
+msgid " -v be verbose"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisk/fdiskbsdlabel.c:448
-msgid "tracks/cylinder"
-msgstr "磁軌/磁柱"
+#: disk-utils/mkfs.cramfs.c:134
+msgid " -E make all warnings errors (non-zero exit status)"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:449 fdisk/fdisk.c:662 fdisk/sfdisk.c:914
-msgid "cylinders"
-msgstr "磁柱"
+#: disk-utils/mkfs.cramfs.c:135
+msgid " -b blksize use this blocksize, must equal page size"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:456
-msgid "sectors/cylinder"
-msgstr "磁區/磁柱"
+#: disk-utils/mkfs.cramfs.c:136
+msgid " -e edition set edition number (part of fsid)"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:460
+#: disk-utils/mkfs.cramfs.c:137
#, c-format
-msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
-msgstr "必須 <= 磁區/磁軌 * 磁軌/磁柱 (預設)。\n"
+msgid " -N endian set cramfs endianness (%s|%s|%s), default %s\n"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:462
-msgid "rpm"
-msgstr "rpm"
+#: disk-utils/mkfs.cramfs.c:138
+#, fuzzy
+msgid " -i file insert a file image into the filesystem"
+msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
-#: fdisk/fdiskbsdlabel.c:463
-msgid "interleave"
-msgstr "交錯"
+#: disk-utils/mkfs.cramfs.c:139
+#, fuzzy
+msgid " -n name set name of cramfs filesystem"
+msgstr "檢查所有檔案系統。\n"
-#: fdisk/fdiskbsdlabel.c:464
-msgid "trackskew"
-msgstr "trackskew"
+#: disk-utils/mkfs.cramfs.c:140
+#, fuzzy, c-format
+msgid " -p pad by %d bytes for boot code\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisk/fdiskbsdlabel.c:465
-msgid "cylinderskew"
-msgstr "cylinderskew"
+#: disk-utils/mkfs.cramfs.c:141
+msgid " -s sort directory entries (old option, ignored)"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:466
-msgid "headswitch"
-msgstr "headswitch"
+#: disk-utils/mkfs.cramfs.c:142
+#, fuzzy
+msgid " -z make explicit holes"
+msgstr " -f 不分割長列\n"
-#: fdisk/fdiskbsdlabel.c:467
-msgid "track-to-track seek"
-msgstr "軌對軌搜尋"
+#: disk-utils/mkfs.cramfs.c:143
+msgid " dirname root of the filesystem to be compressed"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:508
-#, c-format
-msgid "Bootstrap: %sboot -> boot%s (%s): "
-msgstr "啟動程式：%sboot -> boot%s (%s)："
+#: disk-utils/mkfs.cramfs.c:144
+msgid " outfile output file"
+msgstr ""
-#: fdisk/fdiskbsdlabel.c:533
-#, c-format
-msgid "Bootstrap overlaps with disk label!\n"
-msgstr "啟動程式與磁碟標籤重疊！\n"
+#: disk-utils/mkfs.cramfs.c:162
+#, fuzzy, c-format
+msgid "readlink failed: %s"
+msgstr "讀取失敗：%s"
-#: fdisk/fdiskbsdlabel.c:554 fdisk/fdiskbsdlabel.c:556
-#, c-format
-msgid "Bootstrap installed on %s.\n"
-msgstr "啟動程式已安裝於 %s。\n"
-
-#: fdisk/fdiskbsdlabel.c:578
-#, c-format
-msgid "Partition (a-%c): "
-msgstr "分割區 (a-%c)："
+#: disk-utils/mkfs.cramfs.c:307
+#, fuzzy, c-format
+msgid "could not read directory %s"
+msgstr "無法讀取目錄 %s"
-#: fdisk/fdiskbsdlabel.c:597 fdisk/fdisk.c:2442
-#, c-format
-msgid "The maximum number of partitions has been created\n"
-msgstr "已建立分割區的最大數量\n"
+#: disk-utils/mkfs.cramfs.c:442
+#, fuzzy
+msgid "filesystem too big. Exiting."
+msgstr "檔案系統太大。 離開。"
-#: fdisk/fdiskbsdlabel.c:609
+#: disk-utils/mkfs.cramfs.c:601
#, c-format
-msgid "This partition already exists.\n"
-msgstr "這個分割區已經存在。\n"
+msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
+msgstr "AIEEE：區塊「被壓縮」到 > 2*區塊長度 (%ld)\n"
-#: fdisk/fdiskbsdlabel.c:737
+#: disk-utils/mkfs.cramfs.c:620
#, c-format
-msgid "Warning: too many partitions (%d, maximum is %d).\n"
-msgstr "警告：太多分割區 (%d, 最大值為 %d)。\n"
+msgid "%6.2f%% (%+ld bytes)\t%s\n"
+msgstr "%6.2f%% (%+ld 位元組)\t%s\n"
-#: fdisk/fdiskbsdlabel.c:785
-#, c-format
-msgid ""
-"\n"
-"Syncing disks.\n"
-msgstr ""
-"\n"
-"同步磁碟。\n"
+#: disk-utils/mkfs.cramfs.c:665
+#, fuzzy, c-format
+msgid "cannot close file %s"
+msgstr "無法關閉檔案 %s"
-#: fdisk/fdisk.c:90
+#: disk-utils/mkfs.cramfs.c:742
#, fuzzy
-msgid "toggle a bootable flag"
-msgstr " a 切換可開機的旗標"
+msgid "invalid edition number argument"
+msgstr "無效的分割區編號引數"
-#: fdisk/fdisk.c:91
+#: disk-utils/mkfs.cramfs.c:752
#, fuzzy
-msgid "toggle a read only flag"
-msgstr " a 切換唯讀旗標"
+msgid "invalid endianness given; must be 'big', 'little', or 'host'"
+msgstr "無效的尾序給定的。必須是『大』，『小型』，或『主機』"
-#: fdisk/fdisk.c:92
-#, fuzzy
-msgid "select bootable partition"
-msgstr " a 選取可開機的分割區"
+#: disk-utils/mkfs.cramfs.c:817
+#, fuzzy, c-format
+msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely."
+msgstr "警告：guestimate 的必要項大小 (上限) 是 %lldMB，但是最大值影像大小是 %uMB。 我們也許消滅過早。"
-#: fdisk/fdisk.c:93
-#, fuzzy
-msgid "change number of alternate cylinders"
-msgstr " a 變更交替磁柱數量"
+#: disk-utils/mkfs.cramfs.c:841
+msgid "ROM image map"
+msgstr "唯讀記憶體圖像映射"
-#: fdisk/fdisk.c:94
-#, fuzzy
-msgid "edit bsd disklabel"
-msgstr " b 編輯 bsd 磁碟標籤"
+#: disk-utils/mkfs.cramfs.c:853
+#, c-format
+msgid "Including: %s\n"
+msgstr "包含：%s\n"
-#: fdisk/fdisk.c:95
-#, fuzzy
-msgid "edit bootfile entry"
-msgstr " b 編輯開機檔案項目"
+#: disk-utils/mkfs.cramfs.c:859
+#, c-format
+msgid "Directory data: %zd bytes\n"
+msgstr "目錄資料：%zd 位元組\n"
-#: fdisk/fdisk.c:96
-#, fuzzy
-msgid "move beginning of data in a partition"
-msgstr " b 移動分割區中資料的開始位置"
+#: disk-utils/mkfs.cramfs.c:867
+#, c-format
+msgid "Everything: %zd kilobytes\n"
+msgstr "所有東西：%zd 千位元組\n"
-#: fdisk/fdisk.c:97
-#, fuzzy
-msgid "toggle the dos compatibility flag"
-msgstr " c 切換 DOS 相容性旗標"
+#: disk-utils/mkfs.cramfs.c:872
+#, c-format
+msgid "Super block: %zd bytes\n"
+msgstr "超區塊：%zd 位元組\n"
-#: fdisk/fdisk.c:98
-#, fuzzy
-msgid "toggle the mountable flag"
-msgstr " c 切換掛載表旗標"
+#: disk-utils/mkfs.cramfs.c:879
+#, c-format
+msgid "CRC: %x\n"
+msgstr "CRC：%x\n"
-#: fdisk/fdisk.c:99
-#, fuzzy
-msgid "select sgi swap partition"
-msgstr " c 選取 sgi 交換分割區"
+#: disk-utils/mkfs.cramfs.c:884
+#, fuzzy, c-format
+msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
+msgstr "不足空格配置的用於唯讀記憶體影像 (%lld 配置，%zu 使用)"
-#: fdisk/fdisk.c:100
-#, fuzzy
-msgid "change number of cylinders"
-msgstr " c 變更磁柱數量"
+#: disk-utils/mkfs.cramfs.c:890
+#, fuzzy, c-format
+msgid "ROM image write failed (%zd %zd)"
+msgstr "唯讀記憶體影像寫入失敗 (%zd %zd)"
-#: fdisk/fdisk.c:101
-#, fuzzy
-msgid "delete a partition"
-msgstr " d 刪除分割區"
+#: disk-utils/mkfs.cramfs.c:893
+msgid "ROM image"
+msgstr "唯讀記憶體映像"
-#: fdisk/fdisk.c:102
-#, fuzzy
-msgid "print the raw data in the partition table"
-msgstr " d 印出分割表中未經處理資料在之中"
+#: disk-utils/mkfs.cramfs.c:902
+#, fuzzy, c-format
+msgid "warning: filenames truncated to %u bytes."
+msgstr "警告：檔名截短至 255 位元組。"
-#: fdisk/fdisk.c:103
+#: disk-utils/mkfs.cramfs.c:904
#, fuzzy
-msgid "change number of extra sectors per cylinder"
-msgstr " e 變更各磁柱的額外磁區數"
+msgid "warning: files were skipped due to errors."
+msgstr "警告：檔案被略過由於錯誤。"
-#: fdisk/fdisk.c:104
-#, fuzzy
-msgid "list extended partitions"
-msgstr " e 列出擴充分割區"
+#: disk-utils/mkfs.cramfs.c:906
+#, fuzzy, c-format
+msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
+msgstr "警告：檔案大小截短至 %luMB (minus 1 位元組)。"
-#: fdisk/fdisk.c:105
-#, fuzzy
-msgid "edit drive data"
-msgstr " e 編輯磁碟資料"
+#: disk-utils/mkfs.cramfs.c:910
+#, fuzzy, c-format
+msgid "warning: uids truncated to %u bits. (This may be a security concern.)"
+msgstr "警告：uids 截短至 %u 位元。 (這也許會是安全上的考量.)"
-#: fdisk/fdisk.c:106
-#, fuzzy
-msgid "fix partition order"
-msgstr " f 修正分割區排序"
+#: disk-utils/mkfs.cramfs.c:913
+#, fuzzy, c-format
+msgid "warning: gids truncated to %u bits. (This may be a security concern.)"
+msgstr "警告：gids 截短至 %u 位元。 (這也許會是安全上的考量.)"
-#: fdisk/fdisk.c:107
-#, fuzzy
-msgid "create an IRIX (SGI) partition table"
-msgstr " g 建立 IRIX (SGI) 分割表"
+#: disk-utils/mkfs.cramfs.c:916
+#, fuzzy, c-format
+msgid ""
+"WARNING: device numbers truncated to %u bits. This almost certainly means\n"
+"that some device files will be wrong."
+msgstr ""
+"警告：裝置編號截短至 %u 位元。 這個幾乎某些表示\n"
+"該某些裝置檔案將是錯誤的。"
-#: fdisk/fdisk.c:108
-#, fuzzy
-msgid "change number of heads"
-msgstr " h 變更磁頭數量"
+#: disk-utils/mkfs.minix.c:138
+#, fuzzy, c-format
+msgid " %s [options] /dev/name [blocks]\n"
+msgstr "用法：%s [選項] 裝置 [block-count]\n"
-#: fdisk/fdisk.c:109
+#: disk-utils/mkfs.minix.c:140
#, fuzzy
-msgid "change interleave factor"
-msgstr " i 變更交錯因子"
+msgid " -1 use Minix version 1\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: fdisk/fdisk.c:110
+#: disk-utils/mkfs.minix.c:141
#, fuzzy
-msgid "change the disk identifier"
-msgstr " i 變更磁碟識別碼"
+msgid " -2, -v use Minix version 2\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: fdisk/fdisk.c:111
+#: disk-utils/mkfs.minix.c:142
#, fuzzy
-msgid "install bootstrap"
-msgstr " i 安裝啟動程式"
+msgid " -3 use Minix version 3\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: fdisk/fdisk.c:112
+#: disk-utils/mkfs.minix.c:143
#, fuzzy
-msgid "list known partition types"
-msgstr " l 列出已知分割區類型"
+msgid " -n, --namelength <num> maximum length of filenames\n"
+msgstr "剖析列號的時失敗"
-#: fdisk/fdisk.c:113
+#: disk-utils/mkfs.minix.c:144
#, fuzzy
-msgid "print this menu"
-msgstr " m 印出這個選單"
+msgid " -i, --inodes <num> number of inodes for the filesystem\n"
+msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
-#: fdisk/fdisk.c:114
+#: disk-utils/mkfs.minix.c:145
#, fuzzy
-msgid "add a new partition"
-msgstr " n 加入新的分割區"
+msgid " -c, --check check the device for bad blocks\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: fdisk/fdisk.c:115
-#, fuzzy
-msgid "create a new empty DOS partition table"
-msgstr " o 建立新的空白 DOS 分割表"
+#: disk-utils/mkfs.minix.c:146
+msgid " -l, --badblocks <file> list of bad blocks from file\n"
+msgstr ""
-#: fdisk/fdisk.c:116
-#, fuzzy
-msgid "change rotation speed (rpm)"
-msgstr " o 變更轉速 (rpm)"
+#: disk-utils/mkfs.minix.c:189
+#, fuzzy, c-format
+msgid "%s: seek to boot block failed in write_tables"
+msgstr "%s：尋指到啟動區段失敗 在中 writetables(_T)"
-#: fdisk/fdisk.c:117
-#, fuzzy
-msgid "print the partition table"
-msgstr "只顯示此分割表"
+#: disk-utils/mkfs.minix.c:192
+#, fuzzy, c-format
+msgid "%s: unable to clear boot sector"
+msgstr "%s：無法清空開機磁區"
-#: fdisk/fdisk.c:118
-#, fuzzy
-msgid "quit without saving changes"
-msgstr " q 離開而不需儲存變更"
+#: disk-utils/mkfs.minix.c:194
+#, fuzzy, c-format
+msgid "%s: seek failed in write_tables"
+msgstr "%s：尋指失敗的在中 writetables(_T)"
-#: fdisk/fdisk.c:119
-#, fuzzy
-msgid "return to main menu"
-msgstr " r 回到主選單"
+#: disk-utils/mkfs.minix.c:197
+#, fuzzy, c-format
+msgid "%s: unable to write super-block"
+msgstr "%s：無法寫入超區塊"
-#: fdisk/fdisk.c:120
-#, fuzzy
-msgid "create a new empty Sun disklabel"
-msgstr " s 建立新的空白 Sun 磁碟標籤"
+#: disk-utils/mkfs.minix.c:200
+#, fuzzy, c-format
+msgid "%s: unable to write inode map"
+msgstr "%s：無法寫入 inode 映射"
-#: fdisk/fdisk.c:121
-#, fuzzy
-msgid "change number of sectors/track"
-msgstr " s 變更每條磁軌的磁區數"
+#: disk-utils/mkfs.minix.c:203
+#, fuzzy, c-format
+msgid "%s: unable to write zone map"
+msgstr "%s：無法寫入區映射"
-#: fdisk/fdisk.c:122
-#, fuzzy
-msgid "show complete disklabel"
-msgstr " s 顯示完整磁碟標籤"
+#: disk-utils/mkfs.minix.c:206
+#, fuzzy, c-format
+msgid "%s: unable to write inodes"
+msgstr "%s：無法寫入 inodes"
-#: fdisk/fdisk.c:123
-#, fuzzy
-msgid "change a partition's system id"
-msgstr " t 變更分割區系統識別號"
+#: disk-utils/mkfs.minix.c:211
+#, fuzzy, c-format
+msgid "%s: seek failed in write_block"
+msgstr "%s：尋指失敗的在中 writeblock(_B)"
-#: fdisk/fdisk.c:124
-#, fuzzy
-msgid "change display/entry units"
-msgstr " u 變更顯示/輸入單位"
+#: disk-utils/mkfs.minix.c:214
+#, fuzzy, c-format
+msgid "%s: write failed in write_block"
+msgstr "%s：寫入失敗的在中 writeblock(_B)"
-#: fdisk/fdisk.c:125
-#, fuzzy
-msgid "verify the partition table"
-msgstr " v 驗證分割表"
+#: disk-utils/mkfs.minix.c:223 disk-utils/mkfs.minix.c:298
+#: disk-utils/mkfs.minix.c:347
+#, fuzzy, c-format
+msgid "%s: too many bad blocks"
+msgstr "%s：太多不當的區塊"
-#: fdisk/fdisk.c:126
-#, fuzzy
-msgid "write table to disk and exit"
-msgstr " w 分割表寫入磁碟然後離開"
+#: disk-utils/mkfs.minix.c:231
+#, fuzzy, c-format
+msgid "%s: not enough good blocks"
+msgstr "%s：不足良好區塊"
-#: fdisk/fdisk.c:127
-#, fuzzy
-msgid "write disklabel to disk"
-msgstr " w 將磁碟標籤寫入磁碟"
+#: disk-utils/mkfs.minix.c:546
+#, c-format
+msgid ""
+"First data block at %jd, which is too far (max %d).\n"
+"Try specifying fewer inodes by passing --inodes <num>"
+msgstr ""
-#: fdisk/fdisk.c:128
-#, fuzzy
-msgid "extra functionality (experts only)"
-msgstr " x 額外功能 (專家限用)"
+#: disk-utils/mkfs.minix.c:566
+#, fuzzy, c-format
+msgid "%lu inode\n"
+msgid_plural "%lu inodes\n"
+msgstr[0] "%lu inodes\n"
-#: fdisk/fdisk.c:130
-#, fuzzy
-msgid "link BSD partition to non-BSD partition"
-msgstr " x 鏈結 BSD 分割區到非 BSD 分割"
+#: disk-utils/mkfs.minix.c:567
+#, fuzzy, c-format
+msgid "%lu block\n"
+msgid_plural "%lu blocks\n"
+msgstr[0] "%lu 區塊\n"
-#: fdisk/fdisk.c:132
-#, fuzzy
-msgid "change number of physical cylinders"
-msgstr " y 變更實體磁柱數量"
+#: disk-utils/mkfs.minix.c:570
+#, fuzzy, c-format
+msgid "Zonesize=%zu\n"
+msgstr "區域大小=%d\n"
-#: fdisk/fdisk.c:297
+#: disk-utils/mkfs.minix.c:571
#, fuzzy, c-format
msgid ""
-"Usage:\n"
-" %1$s [options] <disk> change partition table\n"
-" %1$s [options] -l <disk> list partition table(s)\n"
-" %1$s -s <partition> give partition size(s) in blocks\n"
-"\n"
-"Options:\n"
-" -b <size> sector size (512, 1024, 2048 or 4096)\n"
-" -c[=<mode>] compatible mode: 'dos' or 'nondos' (default)\n"
-" -h print this help text\n"
-" -u[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
-" -v print program version\n"
-" -C <number> specify the number of cylinders\n"
-" -H <number> specify the number of heads\n"
-" -S <number> specify the number of sectors per track\n"
+"Maxsize=%zu\n"
"\n"
msgstr ""
-"用法：\n"
-" fdisk [選項] <disk> 變更分割表\n"
-" fdisk [選項] -l <disk> 清單分割表\n"
-" fdisk -s <partition> 給出分割區大小(單位：區塊)\n"
-"\n"
-"選項：\n"
-" -b <size> 磁區大小 (512,- 1024, 2048 或 4096)\n"
-" -c[=<mode>] 相容模式：'dos' 或 'nondos' (預設)\n"
-" -h 列印這個說明文字\n"
-" -u[=<unit>] dysplay 單位：'cylinders' 或 'sectors' (預設)\n"
-" -v 列印程式版本\n"
-" -C <number> 指定磁柱編號\n"
-" -H <number> 指定前端編號\n"
-" -S <number> 指定各軌段磁區數量\n"
+"最大容量=%ld\n"
"\n"
-#: fdisk/fdisk.c:323
+#: disk-utils/mkfs.minix.c:584
+#, fuzzy, c-format
+msgid "%s: seek failed during testing of blocks"
+msgstr "%s：尋指失敗的在的期間測試的區塊"
+
+#: disk-utils/mkfs.minix.c:591
#, c-format
-msgid "unable to open %s"
-msgstr "無法開啟 %s"
+msgid "Weird values in do_check: probably bugs\n"
+msgstr "do_check 中出現異常值：可能錯誤\n"
-#: fdisk/fdisk.c:326
+#: disk-utils/mkfs.minix.c:624
#, fuzzy, c-format
-msgid "unable to read %s"
-msgstr "無法讀取 %s\n"
+msgid "%s: seek failed in check_blocks"
+msgstr "%s：尋指失敗的在中 checkblocks(_B)"
-#: fdisk/fdisk.c:329
+#: disk-utils/mkfs.minix.c:634
#, fuzzy, c-format
-msgid "unable to seek on %s"
-msgstr "無法尋找 %s\n"
+msgid "%s: bad blocks before data-area: cannot make fs"
+msgstr "%s：不當的區塊之前 data-area：無法製作 fs"
-#: fdisk/fdisk.c:332
+#: disk-utils/mkfs.minix.c:641 disk-utils/mkfs.minix.c:665
#, fuzzy, c-format
-msgid "unable to write %s"
-msgstr "無法寫入 %s\n"
+msgid "%d bad block\n"
+msgid_plural "%d bad blocks\n"
+msgstr[0] "%d 個不良區塊\n"
-#: fdisk/fdisk.c:335
+#: disk-utils/mkfs.minix.c:650
#, fuzzy, c-format
-msgid "BLKGETSIZE ioctl failed on %s"
-msgstr "BLKGETSIZE ioctl 失敗於 %s\n"
-
-#: fdisk/fdisk.c:338
-#, fuzzy
-msgid "fatal error"
-msgstr "嚴重錯誤\n"
-
-#: fdisk/fdisk.c:431
-msgid "Command action"
-msgstr "命令動作"
+msgid "%s: can't open file of bad blocks"
+msgstr "%s：無法開啟檔案的不當的區塊"
-#: fdisk/fdisk.c:557
+#: disk-utils/mkfs.minix.c:655
#, c-format
-msgid "You must set"
-msgstr "您必須設定"
-
-#: fdisk/fdisk.c:658
-msgid "heads"
-msgstr "磁頭"
+msgid "badblock number input error on line %d\n"
+msgstr "損壞區塊編號輸入錯誤於第 %d 列\n"
-#: fdisk/fdisk.c:660 fdisk/sfdisk.c:914
-msgid "sectors"
-msgstr "磁區"
+#: disk-utils/mkfs.minix.c:656
+#, fuzzy, c-format
+msgid "%s: cannot read badblocks file"
+msgstr "%s：無法讀取 badblocks 檔案"
-#: fdisk/fdisk.c:666
+#: disk-utils/mkfs.minix.c:696
#, c-format
-msgid ""
-"%s%s.\n"
-"You can do this from the extra functions menu.\n"
-msgstr ""
-"%s%s.\n"
-"您可以從額外函式選單來做這個。\n"
-
-#: fdisk/fdisk.c:667
-msgid " and "
-msgstr " 和 "
+msgid "block size smaller than physical sector size of %s"
+msgstr "區段大小小於 %s 的實體磁區大小"
-#: fdisk/fdisk.c:688
+#: disk-utils/mkfs.minix.c:699
#, c-format
-msgid ""
-"\n"
-"WARNING: The size of this disk is %d.%d TB (%llu bytes).\n"
-"DOS partition table format can not be used on drives for volumes\n"
-"larger than (%llu bytes) for %d-byte sectors. Use parted(1) and GUID \n"
-"partition table format (GPT).\n"
-"\n"
-msgstr ""
-"\n"
-"警告：這個磁碟的大小是 %d.%d TB (%llu 位元組)。\n"
-"DOS 分割表格式無法用於容量大於 (%llu 位元組)\n"
-"而有 %d-位元組磁區的磁碟。使用 parted(1) 和 GUID\n"
-"分割表格式 (GPT)。\n"
-"\n"
+msgid "cannot determine size of %s"
+msgstr "無法決定 %s 的大小"
-#: fdisk/fdisk.c:706
+#: disk-utils/mkfs.minix.c:707
#, c-format
-msgid ""
-"\n"
-"The device presents a logical sector size that is smaller than\n"
-"the physical sector size. Aligning to a physical sector (or optimal\n"
-"I/O) size boundary is recommended, or performance may be impacted.\n"
+msgid "%s: requested blocks (%llu) exceeds available (%llu) blocks\n"
msgstr ""
-"\n"
-"裝置呈現的邏輯區大小小於\n"
-"實體磁區大小。建議對齊到實體磁區 (或最佳化\n"
-"I/O) 大小邊界，否則效能也許會被影響。\n"
-#: fdisk/fdisk.c:712
-#, c-format
-msgid ""
-"\n"
-"WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
-" switch off the mode (with command 'c')."
-msgstr ""
-"\n"
-"警告：不宜再使用 DOS 相容模式。強烈建議\n"
-" 關掉此模式 (利用命令「c」)。"
+#: disk-utils/mkfs.minix.c:710
+#, fuzzy, c-format
+msgid "%s: number of blocks too small"
+msgstr "%s：區塊數量太小"
-#: fdisk/fdisk.c:717
-#, c-format
-msgid ""
-"\n"
-"WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
-" change units to sectors.\n"
-msgstr ""
-"\n"
-"警告：不宜再用磁柱做為顯示單位。使用命令「u」以\n"
-" 變更單位為磁區。\n"
+#: disk-utils/mkfs.minix.c:725 disk-utils/mkfs.minix.c:731
+#, fuzzy, c-format
+msgid "unsupported name length: %d"
+msgstr "不受支援的引數：%s"
-#: fdisk/fdisk.c:736
-#, c-format
-msgid "Bad offset in primary extended partition\n"
-msgstr "在主要擴充分割區中的不當偏移值\n"
+#: disk-utils/mkfs.minix.c:734
+#, fuzzy, c-format
+msgid "unsupported minix file system version: %d"
+msgstr "不受支援的檔案系統特徵"
-#: fdisk/fdisk.c:750
-#, c-format
-msgid ""
-"Warning: omitting partitions after #%d.\n"
-"They will be deleted if you save this partition table.\n"
+#: disk-utils/mkfs.minix.c:771
+msgid "-v is ambiguous, use '-2' instead"
msgstr ""
-"警告：忽略 #%d 之後的分割區。\n"
-"如果您儲存這個分割表就會刪除它們。\n"
-#: fdisk/fdisk.c:769
-#, c-format
-msgid "Warning: extra link pointer in partition table %d\n"
-msgstr "警告：在分割表中有額外的鏈結指標 %d\n"
+#: disk-utils/mkfs.minix.c:782
+#, fuzzy
+msgid "failed to parse maximum length of filenames"
+msgstr "剖析列號的時失敗"
-#: fdisk/fdisk.c:777
-#, c-format
-msgid "Warning: ignoring extra data in partition table %d\n"
-msgstr "警告：忽略分割表 %d 中的額外資料\n"
+#: disk-utils/mkfs.minix.c:786
+#, fuzzy
+msgid "failed to parse number of inodes"
+msgstr "剖析列號的時失敗"
-#: fdisk/fdisk.c:810
-#, c-format
-msgid "omitting empty partition (%d)\n"
-msgstr "忽ç\95¥ç©ºç\9a\84å\88\86å\89² (%d)\n"
+#: disk-utils/mkfs.minix.c:809
+#, fuzzy
+msgid "failed to parse number of blocks"
+msgstr "å\89\96æ\9e\90å\88\97è\99\9fç\9a\84æ\99\82失æ\95\97"
-#: fdisk/fdisk.c:829
+#: disk-utils/mkfs.minix.c:817
#, c-format
-msgid "Disk identifier: 0x%08x\n"
-msgstr "磁碟識別碼：0x%08x\n"
+msgid "%s is mounted; will not make a filesystem here!"
+msgstr "%s 已掛載；在此將無法製作檔案系統！"
-#: fdisk/fdisk.c:838
-#, c-format
-msgid "New disk identifier (current 0x%08x): "
-msgstr "新磁碟識別碼 (目前為 0x%08x)："
+#: disk-utils/mkswap.c:80
+#, fuzzy, c-format
+msgid "Bad user-specified page size %u"
+msgstr "不當的使用者指定的頁面大小 %u"
-#: fdisk/fdisk.c:881
-#, c-format
-msgid "Building a new DOS disklabel with disk identifier 0x%08x.\n"
-msgstr ""
+#: disk-utils/mkswap.c:83
+#, fuzzy, c-format
+msgid "Using user-specified page size %d, instead of the system value %d"
+msgstr "使用使用者指定的頁面大小 %d，以代替系統值 %d"
-#: fdisk/fdisk.c:952
-#, c-format
-msgid "Note: sector size is %d (not %d)\n"
-msgstr "註記：磁區大小為 %d (而非 %d)\n"
+#: disk-utils/mkswap.c:124
+#, fuzzy
+msgid "Label was truncated."
+msgstr "標貼被截斷。"
-#: fdisk/fdisk.c:1123
+#: disk-utils/mkswap.c:132
#, c-format
-msgid "Ignoring extra extended partition %d\n"
-msgstr "忽略額外的擴充分割區 %d\n"
+msgid "no label, "
+msgstr "無標籤，"
-#: fdisk/fdisk.c:1135
+#: disk-utils/mkswap.c:140
#, c-format
-msgid ""
-"Warning: invalid flag 0x%04x of partition table %d will be corrected by w"
-"(rite)\n"
-msgstr "警告：分割表 %2$d 的無效旗標 0x%1$04x 將由 w(rite) 所修正\n"
-
-#: fdisk/fdisk.c:1162
-#, c-format
-msgid "You will not be able to write the partition table.\n"
-msgstr "您將不能寫入分割表。\n"
+msgid "no uuid\n"
+msgstr "沒有 uuid\n"
-#: fdisk/fdisk.c:1186
-#, c-format
+#: disk-utils/mkswap.c:148
+#, fuzzy, c-format
msgid ""
-"This disk has both DOS and BSD magic.\n"
-"Give the 'b' command to go to BSD mode.\n"
+"\n"
+"Usage:\n"
+" %s [options] device [size]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [選項] 裝置 [大小]\n"
+
+#: disk-utils/mkswap.c:153
+msgid "Set up a Linux swap area.\n"
msgstr ""
-"這個磁碟同時有 DOS 和 BSD 特殊碼。\n"
-"輸入「b」命令以前往 BSD 模式。\n"
-#: fdisk/fdisk.c:1196
+#: disk-utils/mkswap.c:156
#, fuzzy, c-format
-msgid "Device does not contain a recognized partition table\n"
-msgstr "磁碟 %s 不包含有效的分割表\n"
+msgid ""
+"\n"
+"Options:\n"
+" -c, --check check bad blocks before creating the swap area\n"
+" -f, --force allow swap size area be larger than device\n"
+" -p, --pagesize SIZE specify page size in bytes\n"
+" -L, --label LABEL specify label\n"
+" -v, --swapversion NUM specify swap-space version number\n"
+" -U, --uuid UUID specify the uuid to use\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -c, --check 檢查不當的區塊之前建立交換區域\n"
+" -f, --force 允許交換大小區域是大於裝置\n"
+" -p, --pagesize 大小 指定頁面大小在中位元組\n"
+" -L, --label 標貼 指定標貼\n"
+" -v, --swapversion NUM 指定交換空間版本編號\n"
+" -U, --uuid UUID 指定 uuid 以使用\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -h, --help 顯示這份說明然後離開\n"
+"\n"
-#: fdisk/fdisk.c:1225
+#: disk-utils/mkswap.c:176
#, fuzzy, c-format
-msgid "Do you really want to quit? "
-msgstr "您真的要繼續嗎？"
+msgid "too many bad pages: %lu"
+msgstr "太多不良頁面"
-#: fdisk/fdisk.c:1286
-msgid "Hex code (type L to list codes): "
-msgstr "å\8d\81å\85é\80²ä½\8d編碼 (輸å\85¥ L 以å\88\97å\87ºç·¨ç¢¼)ï¼\9a"
+#: disk-utils/mkswap.c:197
+msgid "seek failed in check_blocks"
+msgstr "å\9c¨ check_blocks ä¸ç\9a\84å°\8bæ\89¾å¤±æ\95\97"
-#: fdisk/fdisk.c:1319
-#, c-format
-msgid "%s (%u-%u, default %u): "
-msgstr "%s (%u-%u, 預設 %u)："
+#: disk-utils/mkswap.c:205
+#, fuzzy, c-format
+msgid "%lu bad page\n"
+msgid_plural "%lu bad pages\n"
+msgstr[0] "%lu 個不良頁面\n"
-#: fdisk/fdisk.c:1389
-#, c-format
-msgid "Unsupported suffix: '%s'.\n"
-msgstr "不受支援的字尾：「%s」。\n"
+#: disk-utils/mkswap.c:230
+msgid "unable to alloc new libblkid probe"
+msgstr "無法配置新的 libblkid 探針"
+
+#: disk-utils/mkswap.c:232
+msgid "unable to assign device to libblkid probe"
+msgstr "無法指派裝置給 libblkid 探針"
-#: fdisk/fdisk.c:1390
+#: disk-utils/mkswap.c:249
#, c-format
-msgid ""
-"Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
-" 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
+msgid "warning: checking bad blocks from swap file is not supported: %s"
msgstr ""
-"支援的單位: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
-" 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
-#: fdisk/fdisk.c:1416
-#, c-format
-msgid "Using default value %u\n"
-msgstr "使用預設值 %u\n"
+#: disk-utils/mkswap.c:265 disk-utils/mkswap.c:290 disk-utils/mkswap.c:337
+msgid "unable to rewind swap-device"
+msgstr "無法倒轉交換裝置"
+
+#: disk-utils/mkswap.c:293
+msgid "unable to erase bootbits sectors"
+msgstr "無法清除開機磁區"
-#: fdisk/fdisk.c:1422
+#: disk-utils/mkswap.c:309
#, c-format
-msgid "Value out of range.\n"
-msgstr "數值超出範圍。\n"
+msgid "%s: warning: wiping old %s signature."
+msgstr ""
-#: fdisk/fdisk.c:1449
-msgid "Partition number"
-msgstr "分割區編號"
+#: disk-utils/mkswap.c:314
+#, fuzzy, c-format
+msgid "%s: warning: don't erase bootbits sectors"
+msgstr "%s：警告：不清除 bootbits 磁區"
-#: fdisk/fdisk.c:1460
+#: disk-utils/mkswap.c:317
#, c-format
-msgid "Warning: partition %d has empty type\n"
-msgstr "警告：分割區 %d 有空的類型\n"
+msgid " (%s partition table detected). "
+msgstr " (偵測到 %s 分割表)。"
-#: fdisk/fdisk.c:1493 fdisk/fdisk.c:1523
+#: disk-utils/mkswap.c:319
#, c-format
-msgid "Selected partition %d\n"
-msgstr "已選分割區 %d\n"
+msgid " (compiled without libblkid). "
+msgstr " (編譯時未支援 libblkid)。"
-#: fdisk/fdisk.c:1496
-#, c-format
-msgid "No partition is defined yet!\n"
-msgstr "尚無分割區被定義！\n"
+#: disk-utils/mkswap.c:320
+#, fuzzy, c-format
+msgid "Use -f to force.\n"
+msgstr " -f 強制檢查\n"
-#: fdisk/fdisk.c:1526
-#, c-format
-msgid "All primary partitions have been defined already!\n"
-msgstr "所有主要分割區已被定義！\n"
+#: disk-utils/mkswap.c:342
+#, fuzzy, c-format
+msgid "%s: unable to write signature page"
+msgstr "%s：無法寫入簽名頁面"
-#: fdisk/fdisk.c:1537
+#: disk-utils/mkswap.c:383
#, fuzzy
-msgid "cylinder"
-msgid_plural "cylinders"
-msgstr[0] "磁柱"
+msgid "parsing page size failed"
+msgstr "剖析頁面大小失敗"
-#: fdisk/fdisk.c:1538
+#: disk-utils/mkswap.c:389
#, fuzzy
-msgid "sector"
-msgid_plural "sectors"
-msgstr[0] "磁區"
+msgid "parsing version number failed"
+msgstr "剖析版本編號失敗"
-#: fdisk/fdisk.c:1547
-#, c-format
-msgid "Changing display/entry units to cylinders (DEPRECATED!)\n"
-msgstr "變更顯示/輸入單位為磁柱 (不宜再用！)\n"
+#: disk-utils/mkswap.c:392
+#, fuzzy, c-format
+msgid "swapspace version %d is not supported"
+msgstr "速度 %d 不受支援"
-#: fdisk/fdisk.c:1549
-#, c-format
-msgid "Changing display/entry units to sectors\n"
-msgstr "è®\8aæ\9b´é¡¯ç¤º/輸å\85¥å\96®ä½\8dç\82ºç£\81å\8d\80\n"
+#: disk-utils/mkswap.c:398
+#, fuzzy, c-format
+msgid "warning: ignoring -U (UUIDs are unsupported by %s)"
+msgstr "è¦å\91\8aï¼\9a忽ç\95¥ -U (UUIDs 被ä¸\8då\8f\97æ\94¯æ\8f´ç\9a\84ç\94± %s)"
-#: fdisk/fdisk.c:1559
-#, c-format
-msgid "WARNING: Partition %d is an extended partition\n"
-msgstr "警告：分割區 %d 是擴充分割區\n"
+#: disk-utils/mkswap.c:416
+msgid "only one device argument is currently supported"
+msgstr ""
-#: fdisk/fdisk.c:1569
-#, c-format
-msgid "DOS Compatibility flag is set (DEPRECATED!)\n"
-msgstr "DOS 相容性旗標已設定 (不宜再用！)\n"
+#: disk-utils/mkswap.c:423
+#, fuzzy
+msgid "error: parsing UUID failed"
+msgstr "錯誤：UUID 剖析失敗"
-#: fdisk/fdisk.c:1571
-#, c-format
-msgid "DOS Compatibility flag is not set\n"
-msgstr "DOS 相容性旗標未設定\n"
+#: disk-utils/mkswap.c:432
+#, fuzzy
+msgid "error: Nowhere to set up swap on?"
+msgstr "錯誤：無處可設置交換於？"
-#: fdisk/fdisk.c:1649
+#: disk-utils/mkswap.c:438
+#, fuzzy
+msgid "invalid block count argument"
+msgstr "無效的區塊計數引數"
+
+#: disk-utils/mkswap.c:447
#, fuzzy, c-format
-msgid "Partition %d is deleted\n"
-msgstr "分割區 %d 沒有資料區域\n"
+msgid "error: size %llu KiB is larger than device size %<PRIu64> KiB"
+msgstr "錯誤：大小 %llu KiB 是大於裝置大小 %llu KiB"
-#: fdisk/fdisk.c:1668
-#, c-format
-msgid "Partition %d does not exist yet!\n"
-msgstr "分割區 %d 尚不存在！\n"
+#: disk-utils/mkswap.c:453
+#, fuzzy, c-format
+msgid "error: swap area needs to be at least %ld KiB"
+msgstr "錯誤：交換區域需要是至少 %ld KiB"
-#: fdisk/fdisk.c:1673
-#, c-format
-msgid ""
-"Type 0 means free space to many systems\n"
-"(but not to Linux). Having partitions of\n"
-"type 0 is probably unwise. You can delete\n"
-"a partition using the `d' command.\n"
-msgstr ""
-"類型 0 對於許多系統而言表示剩餘空間\n"
-"(並不包括 Linux)。具有\n"
-"類型為 0 的分割區可能不太明智。您可以\n"
-"使用「d」命令來刪除分割區。\n"
+#: disk-utils/mkswap.c:458
+#, fuzzy, c-format
+msgid "warning: truncating swap area to %llu KiB"
+msgstr "警告：截斷交換區域到 %llu KiB"
-#: fdisk/fdisk.c:1682
-#, c-format
-msgid ""
-"You cannot change a partition into an extended one or vice versa\n"
-"Delete it first.\n"
-msgstr ""
-"您無法變更分割區為一個擴充分割或反之\n"
-"請先刪除它。\n"
+#: disk-utils/mkswap.c:463
+#, fuzzy, c-format
+msgid "error: %s is mounted; will not make swapspace"
+msgstr "錯誤：%s 被掛載；將無法製作 swapspace。"
-#: fdisk/fdisk.c:1691
+#: disk-utils/mkswap.c:470 sys-utils/swapon.c:529
#, c-format
-msgid ""
-"Consider leaving partition 3 as Whole disk (5),\n"
-"as SunOS/Solaris expects it and even Linux likes it.\n"
-"\n"
-msgstr ""
-"考慮保留分割區 3 為整個磁碟 (5)，\n"
-"SunOS/Solaris 是如此預期．甚至 Linux 也喜歡它。\n"
-"\n"
+msgid "%s: insecure permissions %04o, %04o suggested."
+msgstr "%s：不安全的權限 %04o, 建議使用 %04o。"
-#: fdisk/fdisk.c:1697
-#, c-format
-msgid ""
-"Consider leaving partition 9 as volume header (0),\n"
-"and partition 11 as entire volume (6), as IRIX expects it.\n"
-"\n"
-msgstr ""
-"考慮保留分割區 9 為卷冊標頭 (0)，\n"
-"以及分割區 11 為整個卷冊 (6)，如同 IRIX 所預期。\n"
-"\n"
+#: disk-utils/mkswap.c:474 sys-utils/swapon.c:534
+#, fuzzy, c-format
+msgid "%s: insecure file owner %d, 0 (root) suggested."
+msgstr "%s：不安全檔案擁有者 %d，0 (根) 建議。"
-#: fdisk/fdisk.c:1714
-#, c-format
-msgid "Changed system type of partition %d to %x (%s)\n"
-msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n"
+#: disk-utils/mkswap.c:489
+msgid "Unable to set up swap-space: unreadable"
+msgstr "無法設置交換空間：無法讀取"
-#: fdisk/fdisk.c:1717
-#, c-format
-msgid "System type of partition %d is unchanged: %x (%s)\n"
-msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
+#: disk-utils/mkswap.c:494
+#, fuzzy, c-format
+msgid "Setting up swapspace version %d, size = %s (%<PRIu64> bytes)\n"
+msgstr "設定 swapspace 版本 1, 大小 = %llu KiB\n"
-#: fdisk/fdisk.c:1772
-#, c-format
-msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n"
-msgstr "分割區 %d 有不同的實體/邏輯開始位置 (非 Linux？)：\n"
+#: disk-utils/mkswap.c:514
+#, fuzzy, c-format
+msgid "%s: unable to obtain selinux file label"
+msgstr "%s：無法得到 selinux 檔案標貼"
-#: fdisk/fdisk.c:1774 fdisk/fdisk.c:1782 fdisk/fdisk.c:1791 fdisk/fdisk.c:1801
-#, c-format
-msgid " phys=(%d, %d, %d) "
-msgstr " 實體=(%d, %d, %d) "
+#: disk-utils/mkswap.c:517
+msgid "unable to matchpathcon()"
+msgstr "無法 matchpathcon()"
-#: fdisk/fdisk.c:1775 fdisk/fdisk.c:1783
-#, c-format
-msgid "logical=(%d, %d, %d)\n"
-msgstr "邏輯=(%d, %d, %d)\n"
+#: disk-utils/mkswap.c:520
+msgid "unable to create new selinux context"
+msgstr "無法建立新的 selinux 相關項目"
-#: fdisk/fdisk.c:1780
-#, c-format
-msgid "Partition %d has different physical/logical endings:\n"
-msgstr "分割區 %d 有不同的實體/邏輯結束位置：\n"
+#: disk-utils/mkswap.c:522
+msgid "couldn't compute selinux context"
+msgstr "無法計算 selinux 相關項目"
-#: fdisk/fdisk.c:1789
-#, c-format
-msgid "Partition %i does not start on cylinder boundary:\n"
-msgstr "分割區 %i 並非開始於磁柱邊界：\n"
+#: disk-utils/mkswap.c:528
+#, fuzzy, c-format
+msgid "unable to relabel %s to %s"
+msgstr "無法 relabel %s 到 %s"
-#: fdisk/fdisk.c:1792
-#, c-format
-msgid "should be (%d, %d, 1)\n"
-msgstr "應該是 (%d, %d, 1)\n"
+#: disk-utils/partx.c:86
+#, fuzzy
+msgid "partition number"
+msgstr "分割區編號"
-#: fdisk/fdisk.c:1798
-#, c-format
-msgid "Partition %i does not end on cylinder boundary.\n"
-msgstr "分割區 %i 並非結束於磁柱邊界。\n"
+#: disk-utils/partx.c:87
+#, fuzzy
+msgid "start of the partition in sectors"
+msgstr "開始的分割在中磁區"
-#: fdisk/fdisk.c:1802
-#, c-format
-msgid "should be (%d, %d, %d)\n"
-msgstr "應該是 (%d, %d, %d)\n"
+#: disk-utils/partx.c:88
+#, fuzzy
+msgid "end of the partition in sectors"
+msgstr "結束的分割在中磁區"
-#: fdisk/fdisk.c:1812
-#, c-format
-msgid "Partition %i does not start on physical sector boundary.\n"
-msgstr "分割區 %i 並非開始於磁柱邊界。\n"
+#: disk-utils/partx.c:89
+#, fuzzy
+msgid "number of sectors"
+msgstr "磁區數量"
-#: fdisk/fdisk.c:1822
-#, c-format
-msgid ""
-"\n"
-"Disk %s: %ld MB, %lld bytes\n"
-msgstr ""
-"\n"
-"磁碟 %s: %ld MB，%lld 位元組\n"
+#: disk-utils/partx.c:90
+#, fuzzy
+msgid "human readable size"
+msgstr "人類 readable 大小"
-#: fdisk/fdisk.c:1826
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Disk %s: %ld.%ld GB, %llu bytes\n"
-msgstr ""
-"\n"
-"磁碟 %s: %ld.%ld GB，%lld 位元組\n"
+#: disk-utils/partx.c:91
+#, fuzzy
+msgid "partition name"
+msgstr "分割名稱"
-#: fdisk/fdisk.c:1829
-#, c-format
-msgid "%d heads, %llu sectors/track, %d cylinders"
-msgstr "%d 磁頭，%llu 磁區/磁軌，%d 磁柱"
+#: disk-utils/partx.c:92 misc-utils/findmnt.c:108 misc-utils/lsblk.c:175
+#, fuzzy
+msgid "partition UUID"
+msgstr "分割 UUID"
-#: fdisk/fdisk.c:1832
-#, c-format
-msgid ", total %llu sectors"
-msgstr "，總計 %llu 磁區"
+#: disk-utils/partx.c:93
+#, fuzzy
+msgid "partition table type (dos, gpt, ...)"
+msgstr "分割表型態 (DOS、gpt，...)"
-#: fdisk/fdisk.c:1834
-#, c-format
-msgid "Units = %s of %d * %d = %d bytes\n"
-msgstr "å\96®ä½\8d = %s ä¹\8bæ\96¼ %d * %d = %d ä½\8då\85\83çµ\84\n"
+#: disk-utils/partx.c:94 misc-utils/lsblk.c:176
+#, fuzzy
+msgid "partition flags"
+msgstr "å\88\86å\89²æ\97\97æ¨\99"
-#: fdisk/fdisk.c:1838
-#, c-format
-msgid "Sector size (logical/physical): %u bytes / %lu bytes\n"
-msgstr "磁區大小 (邏輯/實體)：%u 位元組 / %lu 位元組\n"
+#: disk-utils/partx.c:95
+msgid "partition type (a string, a UUID, or hex)"
+msgstr ""
-#: fdisk/fdisk.c:1840
-#, c-format
-msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes\n"
-msgstr "I/O 大小 (最小/最佳化)：%lu 位元組 / %lu 位元組\n"
+#: disk-utils/partx.c:114 sys-utils/losetup.c:534 sys-utils/losetup.c:648
+#, fuzzy
+msgid "failed to initialize loopcxt"
+msgstr "初始化 loopcxt 時失敗"
-#: fdisk/fdisk.c:1843
-#, c-format
-msgid "Alignment offset: %lu bytes\n"
-msgstr "對齊偏移值：%lu 位元組\n"
+#: disk-utils/partx.c:118
+#, fuzzy, c-format
+msgid "%s: failed to find unused loop device"
+msgstr "%s：無法尋找未使用的迴圈裝置"
-#: fdisk/fdisk.c:1952
-#, c-format
-msgid ""
-"Nothing to do. Ordering is correct already.\n"
-"\n"
-msgstr ""
-"無事可做。順序已經是正確的。\n"
-"\n"
+#: disk-utils/partx.c:122
+#, fuzzy, c-format
+msgid "Trying to use '%s' for the loop device\n"
+msgstr "嘗試使用『%s』用於迴圈裝置\n"
-#: fdisk/fdisk.c:1980
-#, c-format
-msgid "Done.\n"
-msgstr "完成。\n"
+#: disk-utils/partx.c:126
+#, fuzzy, c-format
+msgid "%s: failed to set backing file"
+msgstr "%s：無法設定上一步檔案"
-#: fdisk/fdisk.c:2008
-#, c-format
-msgid ""
-"This doesn't look like a partition table\n"
-"Probably you selected the wrong device.\n"
-"\n"
-msgstr ""
-"這看起來不像是一個分割表\n"
-"您大概選了錯誤的裝置。\n"
-"\n"
+#: disk-utils/partx.c:131 sys-utils/losetup.c:581
+#, fuzzy, c-format
+msgid "%s: failed to set up loop device"
+msgstr "%s：無法設定迴圈裝置"
-#: fdisk/fdisk.c:2021
+#: disk-utils/partx.c:161 login-utils/lslogins.c:311 misc-utils/fincore.c:92
+#: misc-utils/findmnt.c:376 misc-utils/lsblk.c:315 misc-utils/lslocks.c:344
+#: misc-utils/uuidparse.c:125 misc-utils/wipefs.c:131 sys-utils/losetup.c:112
+#: sys-utils/lscpu.c:245 sys-utils/lscpu.c:260 sys-utils/lsipc.c:232
+#: sys-utils/lsmem.c:178 sys-utils/lsns.c:223 sys-utils/prlimit.c:277
+#: sys-utils/rfkill.c:159 sys-utils/swapon.c:150 sys-utils/wdctl.c:161
+#: sys-utils/zramctl.c:147
#, c-format
-msgid "%*s Boot Start End Blocks Id System\n"
-msgstr "%*s 開機 開始 結束 區塊 識別號 系統\n"
+msgid "unknown column: %s"
+msgstr "不明直欄：%s"
-#: fdisk/fdisk.c:2022 fdisk/fdisksgilabel.c:210 fdisk/fdisksunlabel.c:566
-msgid "Device"
-msgstr "所用裝置"
+#: disk-utils/partx.c:209
+#, fuzzy, c-format
+msgid "%s: failed to get partition number"
+msgstr "%s：無法提取分割區編號"
-#: fdisk/fdisk.c:2060
-#, c-format
-msgid ""
-"\n"
-"Partition table entries are not in disk order\n"
-msgstr ""
-"\n"
-"分割表項目未按磁碟排序\n"
+#: disk-utils/partx.c:287 disk-utils/partx.c:325 disk-utils/partx.c:477
+#, fuzzy, c-format
+msgid "specified range <%d:%d> does not make sense"
+msgstr "指定的範圍<%d:%d>不具任何意義"
-#: fdisk/fdisk.c:2070
+#: disk-utils/partx.c:291
#, c-format
-msgid ""
-"\n"
-"Disk %s: %d heads, %llu sectors, %d cylinders\n"
-"\n"
+msgid "range recount: max partno=%d, lower=%d, upper=%d\n"
msgstr ""
-"\n"
-"磁碟 %s: %d 磁頭，%llu 磁區，%d 磁柱\n"
-"\n"
-#: fdisk/fdisk.c:2072
-#, c-format
-msgid "Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID\n"
-msgstr "Nr AF 磁頭 磁區 磁柱 磁頭 磁區 磁柱 開始 大小 ID\n"
+#: disk-utils/partx.c:298
+#, fuzzy, c-format
+msgid "%s: error deleting partition %d"
+msgstr "%s：錯誤刪除分割 %d"
-#: fdisk/fdisk.c:2120
-#, c-format
-msgid "Warning: partition %d contains sector 0\n"
-msgstr "警告：分割區 %d 含有磁區 0\n"
+#: disk-utils/partx.c:300
+#, fuzzy, c-format
+msgid "%s: error deleting partitions %d-%d"
+msgstr "%s：錯誤刪除分割區 %d-%d"
-#: fdisk/fdisk.c:2123
-#, c-format
-msgid "Partition %d: head %d greater than maximum %d\n"
-msgstr "分割區 %d: 磁頭 %d 大於最大值 %d\n"
+#: disk-utils/partx.c:333
+#, fuzzy, c-format
+msgid "%s: partition #%d removed\n"
+msgstr "%s：分割 #%d 移除\n"
-#: fdisk/fdisk.c:2126
-#, c-format
-msgid "Partition %d: sector %d greater than maximum %llu\n"
-msgstr "分割區 %d: 磁區 %d 大於最大值 %llu\n"
+#: disk-utils/partx.c:337
+#, fuzzy, c-format
+msgid "%s: partition #%d doesn't exist\n"
+msgstr "%s：分割 #%d 已經不存在\n"
-#: fdisk/fdisk.c:2129
-#, c-format
-msgid "Partitions %d: cylinder %d greater than maximum %d\n"
-msgstr "分割區 %d: 磁柱 %d 大於最大值 %d\n"
+#: disk-utils/partx.c:342
+#, fuzzy, c-format
+msgid "%s: deleting partition #%d failed"
+msgstr "%s：刪除分割 #%d 失敗"
-#: fdisk/fdisk.c:2133
-#, c-format
-msgid "Partition %d: previous sectors %d disagrees with total %d\n"
-msgstr "分割區 %d: 之前磁區 %d 與總計不一致 %d\n"
+#: disk-utils/partx.c:362
+#, fuzzy, c-format
+msgid "%s: error adding partition %d"
+msgstr "%s：錯誤加入分割 %d"
-#: fdisk/fdisk.c:2167
-#, c-format
-msgid "Warning: bad start-of-data in partition %d\n"
-msgstr "警告：在分割區 %d 中不當的資料起始\n"
+#: disk-utils/partx.c:364
+#, fuzzy, c-format
+msgid "%s: error adding partitions %d-%d"
+msgstr "%s：錯誤加入分割區 %d-%d"
-#: fdisk/fdisk.c:2175
-#, c-format
-msgid "Warning: partition %d overlaps partition %d.\n"
-msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
+#: disk-utils/partx.c:405 disk-utils/partx.c:513
+#, fuzzy, c-format
+msgid "%s: partition #%d added\n"
+msgstr "%s：分割 #%d 已加入\n"
-#: fdisk/fdisk.c:2195
-#, c-format
-msgid "Warning: partition %d is empty\n"
-msgstr "警告：分割區 %d 是空的\n"
+#: disk-utils/partx.c:410
+#, fuzzy, c-format
+msgid "%s: adding partition #%d failed"
+msgstr "%s：加入分割 #%d 失敗"
-#: fdisk/fdisk.c:2200
-#, c-format
-msgid "Logical partition %d not entirely in partition %d\n"
-msgstr "邏輯分割區 %d 並非完整處於分割區 %d 中\n"
+#: disk-utils/partx.c:445
+#, fuzzy, c-format
+msgid "%s: error updating partition %d"
+msgstr "%s：錯誤刪除分割 %d"
-#: fdisk/fdisk.c:2206
-#, c-format
-msgid "Total allocated sectors %llu greater than the maximum %llu\n"
-msgstr "配置的磁區總計 %llu 大於最大值 %llu\n"
+#: disk-utils/partx.c:447
+#, fuzzy, c-format
+msgid "%s: error updating partitions %d-%d"
+msgstr "%s：錯誤刪除分割區 %d-%d"
-#: fdisk/fdisk.c:2209
-#, c-format
-msgid "Remaining %lld unallocated %d-byte sectors\n"
-msgstr "尚餘 %lld 未配置的 %d-位元組磁區\n"
+#: disk-utils/partx.c:486
+#, fuzzy, c-format
+msgid "%s: no partition #%d"
+msgstr "%s：分割 #%d 已加入\n"
-#: fdisk/fdisk.c:2238
+#: disk-utils/partx.c:507
#, fuzzy, c-format
-msgid "Partition %d of type %s and of size %s is set\n"
-msgstr "分割區 %d 尚不存在！\n"
+msgid "%s: partition #%d resized\n"
+msgstr "%s：分割 #%d 移除\n"
-#: fdisk/fdisk.c:2252 fdisk/fdisksgilabel.c:626 fdisk/fdisksunlabel.c:379
-#, c-format
-msgid "Partition %d is already defined. Delete it before re-adding it.\n"
-msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+#: disk-utils/partx.c:521
+#, fuzzy, c-format
+msgid "%s: updating partition #%d failed"
+msgstr "%s：刪除分割 #%d 失敗"
-#: fdisk/fdisk.c:2298
-#, c-format
-msgid "Sector %llu is already allocated\n"
-msgstr "磁區 %llu 已經配置\n"
+#: disk-utils/partx.c:562
+#, fuzzy, c-format
+msgid "#%2d: %9ju-%9ju (%9ju sector, %6ju MB)\n"
+msgid_plural "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
+msgstr[0] "#%2d：%9 ju-%9 ju (%9 ju 磁區，%6 ju MB)\n"
-#: fdisk/fdisk.c:2334
-#, c-format
-msgid "No free sectors available\n"
-msgstr "沒有可用的磁區存在\n"
+#: disk-utils/partx.c:678 misc-utils/fincore.c:370 misc-utils/findmnt.c:1653
+#: misc-utils/lsblk.c:2110 misc-utils/lslocks.c:471 sys-utils/losetup.c:339
+#: sys-utils/lscpu.c:1664 sys-utils/lscpu.c:1876 sys-utils/prlimit.c:306
+#: sys-utils/rfkill.c:471 sys-utils/swapon.c:293 sys-utils/wdctl.c:310
+#, fuzzy
+msgid "failed to allocate output column"
+msgstr "callocate cpu 集合時失敗"
-#: fdisk/fdisk.c:2345
-#, c-format
-msgid "Last %1$s, +%2$s or +size{K,M,G}"
-msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+#: disk-utils/partx.c:722
+#, fuzzy, c-format
+msgid "failed to initialize blkid filter for '%s'"
+msgstr "初始化 blkid 篩選器用於『%s 時失敗』"
-#: fdisk/fdisk.c:2399
+#: disk-utils/partx.c:730
#, fuzzy, c-format
-msgid "Adding logical partition %d\n"
-msgstr "壞的邏輯分割區"
+msgid "%s: failed to read partition table"
+msgstr "%s：無法讀取分割表"
-#: fdisk/fdisk.c:2421
-#, c-format
-msgid ""
-"\tSorry - this fdisk cannot handle AIX disk labels.\n"
-"\tIf you want to add DOS-type partitions, create\n"
-"\ta new empty DOS partition table first. (Use o.)\n"
-"\tWARNING: This will destroy the present disk contents.\n"
-msgstr ""
-"\t抱歉 - fdisk 無法處理 AIX 磁碟標籤。\n"
-"\t如果您要加入 DOS 類型分割區，請先建立\n"
-"\t新的空 DOS 分割表。(使用 o.)\n"
-"\t警告：這將銷毀現有磁碟內容。\n"
+#: disk-utils/partx.c:736
+#, fuzzy, c-format
+msgid "%s: partition table type '%s' detected\n"
+msgstr "%s：分割表型態『%s』偵測到\n"
-#: fdisk/fdisk.c:2430
-#, c-format
-msgid ""
-"\tSorry - this fdisk cannot handle Mac disk labels.\n"
-"\tIf you want to add DOS-type partitions, create\n"
-"\ta new empty DOS partition table first. (Use o.)\n"
-"\tWARNING: This will destroy the present disk contents.\n"
-msgstr ""
-"\t抱歉 - fdisk 無法處理 Mac 磁碟標籤。\n"
-"\t如果您要加入 DOS 類型分割區，請先建立\n"
-"\t新的空 DOS 分割表。(使用 o.)\n"
-"\t警告：這將銷毀現有磁碟內容。\n"
+#: disk-utils/partx.c:740
+#, fuzzy, c-format
+msgid "%s: partition table with no partitions"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisk.c:2448
+#: disk-utils/partx.c:753
#, fuzzy, c-format
-msgid "All primary partitions are in use\n"
-msgstr "所有邏輯分割區都在使用中\n"
+msgid " %s [-a|-d|-s|-u] [--nr <n:m> | <partition>] <disk>\n"
+msgstr " %s [-a|-d|-s] [--nr <n:m>|<分割>]<磁碟>\n"
-#: fdisk/fdisk.c:2451
-#, c-format
-msgid ""
-"If you want to create more than four partitions, you must replace a\n"
-"primary partition with an extended partition first.\n"
+#: disk-utils/partx.c:757
+msgid "Tell the kernel about the presence and numbering of partitions.\n"
msgstr ""
-#: fdisk/fdisk.c:2454
-#, c-format
-msgid "All logical partitions are in use\n"
-msgstr "所有邏輯分割區都在使用中\n"
-
-#: fdisk/fdisk.c:2455
-#, c-format
-msgid "Adding a primary partition\n"
-msgstr "加入一個主要分割區\n"
+#: disk-utils/partx.c:760
+#, fuzzy
+msgid " -a, --add add specified partitions or all of them\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisk/fdisk.c:2462
-#, c-format
-msgid ""
-"Partition type:\n"
-" p primary (%d primary, %d extended, %d free)\n"
-"%s\n"
-"Select (default %c): "
+#: disk-utils/partx.c:761
+msgid " -d, --delete delete specified partitions or all of them\n"
msgstr ""
-#: fdisk/fdisk.c:2467
+#: disk-utils/partx.c:762
#, fuzzy
-msgid " l logical (numbered from 5)"
-msgstr "l 邏輯 (5 或之上)"
+msgid " -u, --update update specified partitions or all of them\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/fdisk.c:2467
+#: disk-utils/partx.c:763
#, fuzzy
-msgid " e extended"
-msgstr "e 擴充"
-
-#: fdisk/fdisk.c:2473
-#, fuzzy, c-format
-msgid "Using default response %c\n"
-msgstr "使用預設值 %u\n"
-
-#: fdisk/fdisk.c:2489
-#, fuzzy, c-format
-msgid "Invalid partition type `%c'\n"
-msgstr "無效的分割區編號用於類型「%c」\n"
-
-#: fdisk/fdisk.c:2531
-#, c-format
msgid ""
-"The partition table has been altered!\n"
-"\n"
-msgstr ""
-"分割表已變更！\n"
+" -s, --show list partitions\n"
"\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/fdisk.c:2544
-#, c-format
-msgid "Calling ioctl() to re-read partition table.\n"
-msgstr "呼叫 ioctl() 以重新讀取分割表。\n"
-
-#: fdisk/fdisk.c:2553
-#, fuzzy, c-format
-msgid ""
-"\n"
-"WARNING: Re-reading the partition table failed with error %d: %m.\n"
-"The kernel still uses the old table. The new table will be used at\n"
-"the next reboot or after you run partprobe(8) or kpartx(8)\n"
+#: disk-utils/partx.c:764 misc-utils/lsblk.c:1770 sys-utils/lsmem.c:503
+msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n"
msgstr ""
-"\n"
-"警告：重新讀取分割表失敗並產生錯誤 %d: %s。\n"
-"內核仍然使用舊的表格。新的表格將於下一次\n"
-"重新開機時使用，或是您執行 partprobe(8) 或 kpartx(8) 之後。\n"
-#: fdisk/fdisk.c:2561
-#, c-format
-msgid ""
-"\n"
-"WARNING: If you have created or modified any DOS 6.x\n"
-"partitions, please see the fdisk manual page for additional\n"
-"information.\n"
+#: disk-utils/partx.c:765
+msgid " -g, --noheadings don't print headings for --show\n"
msgstr ""
-"\n"
-"警告：如果您已建立或修改任何 DOS 6.x\n"
-"分割區，請參看 fdisk 線上手冊以獲得額外\n"
-"資訊。\n"
-#: fdisk/fdisk.c:2567
-#, c-format
-msgid ""
-"\n"
-"Error closing file\n"
+#: disk-utils/partx.c:766
+msgid " -n, --nr <n:m> specify the range of partitions (e.g. --nr 2:4)\n"
msgstr ""
-"\n"
-"關閉檔案發生錯誤\n"
-#: fdisk/fdisk.c:2571
-#, c-format
-msgid "Syncing disks.\n"
-msgstr "同步磁碟。\n"
+#: disk-utils/partx.c:767
+#, fuzzy
+msgid " -o, --output <list> define which output columns to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: fdisk/fdisk.c:2617
-#, c-format
-msgid "Partition %d has no data area\n"
-msgstr "分割區 %d 沒有資料區域\n"
+#: disk-utils/partx.c:768 sys-utils/lsmem.c:506
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: fdisk/fdisk.c:2646
-msgid "New beginning of data"
-msgstr "新的資料開始部份"
+#: disk-utils/partx.c:769 misc-utils/lsblk.c:1766 sys-utils/lsmem.c:501
+#, fuzzy
+msgid " -P, --pairs use key=\"value\" output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: fdisk/fdisk.c:2663
-msgid "Expert command (m for help): "
-msgstr "專家命令 (m 以獲得說明)："
+#: disk-utils/partx.c:770 misc-utils/lsblk.c:1781 sys-utils/lsmem.c:507
+#, fuzzy
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: fdisk/fdisk.c:2676
-msgid "Number of cylinders"
-msgstr "磁柱數量"
+#: disk-utils/partx.c:771
+#, fuzzy
+msgid " -S, --sector-size <num> overwrite sector size\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: fdisk/fdisk.c:2701
-msgid "Number of heads"
-msgstr "磁頭數量"
+#: disk-utils/partx.c:772
+#, fuzzy
+msgid " -t, --type <type> specify the partition type\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/fdisk.c:2728
-msgid "Number of sectors"
-msgstr "磁區數量"
+#: disk-utils/partx.c:773
+#, fuzzy
+msgid " --list-types list supported partition types and exit\n"
+msgstr " -T [或 --list-types]：列出已知分割區類型"
-#: fdisk/fdisk.c:2730
-#, c-format
-msgid "Warning: setting sector offset for DOS compatiblity\n"
-msgstr "警告：設定磁區偏移以達到 DOS 相容性\n"
+#: disk-utils/partx.c:774 sys-utils/fallocate.c:101
+#, fuzzy
+msgid " -v, --verbose verbose mode\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisk/fdisk.c:2768
-#, c-format
-msgid ""
-"\n"
-"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't "
-"support GPT. Use GNU Parted.\n"
-"\n"
+#: disk-utils/partx.c:859
+#, fuzzy
+msgid "failed to parse --nr <M-N> range"
+msgstr "剖析 --nr 時失敗 <M-N> 範圍"
+
+#: disk-utils/partx.c:948
+#, fuzzy
+msgid "partition and disk name do not match"
msgstr ""
+"分割表已變更！\n"
"\n"
-"警告：於「%s」偵測到 GPT (GUID 分割表)！工具程式 fdisk 不支援 GPT。請使用 "
-"GNU Parted。\n"
-"\n"
-
-#: fdisk/fdisk.c:2790
-#, c-format
-msgid "Disk %s doesn't contain a valid partition table\n"
-msgstr "磁碟 %s 不包含有效的分割表\n"
-
-#: fdisk/fdisk.c:2801
-#, c-format
-msgid "Cannot open %s\n"
-msgstr "無法開啟 %s\n"
-#: fdisk/fdisk.c:2821 fdisk/sfdisk.c:2728
-#, c-format
-msgid "cannot open %s\n"
-msgstr "無法開啟 %s\n"
-
-#: fdisk/fdisk.c:2846
-#, c-format
-msgid "%c: unknown command\n"
-msgstr "%c: 不明的命令\n"
+#: disk-utils/partx.c:977
+#, fuzzy
+msgid "--nr and <partition> are mutually exclusive"
+msgstr "--nr 和 <partition> 彼此互斥"
-#: fdisk/fdisk.c:2856
-#, c-format
-msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
-msgstr "於 %s 偵測到 OSF/1 磁碟標籤，進入磁碟標籤模式。\n"
+#: disk-utils/partx.c:996
+#, fuzzy, c-format
+msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
+msgstr "分割：%s，磁碟：%s，降低：%d，大寫：%d\n"
-#: fdisk/fdisk.c:2866
-msgid "Command (m for help): "
-msgstr "命令 (m 以獲得說明)："
+#: disk-utils/partx.c:1008
+#, fuzzy, c-format
+msgid "%s: cannot delete partitions"
+msgstr "%s：無法刪除分割區"
-#: fdisk/fdisk.c:3025
-#, c-format
-msgid "This kernel finds the sector size itself - -b option ignored\n"
-msgstr "內核自行找到磁區大小 - -b 選項忽略\n"
+#: disk-utils/partx.c:1011
+#, fuzzy, c-format
+msgid "%s: partitioned loop devices unsupported"
+msgstr "%s：分割的迴圈裝置不受支援的"
-#: fdisk/fdisk.c:3029
-#, c-format
-msgid ""
-"Warning: the -b (set sector size) option should be used with one specified "
-"device\n"
-msgstr "警告：-b (設定磁區大小) 選項應該與一個指定裝置共同使用\n"
+#: disk-utils/partx.c:1028
+#, fuzzy, c-format
+msgid "%s: failed to initialize blkid prober"
+msgstr "%s：無法初始化 blkid prober"
-#: fdisk/fdisk.c:3079
+#: disk-utils/raw.c:50
#, fuzzy, c-format
msgid ""
-"Welcome to fdisk (%s).\n"
-"\n"
-"Changes will remain in memory only, until you decide to write them.\n"
-"Be careful before using the write command.\n"
-"\n"
+" %1$s %2$srawN <major> <minor>\n"
+" %1$s %2$srawN /dev/<blockdevice>\n"
+" %1$s -q %2$srawN\n"
+" %1$s -qa\n"
msgstr ""
-"建立新的 sun 磁碟標籤。變更將只存在記憶體中，\n"
-"直到您決定寫入它們。當然在此之後，之前的\n"
-"內容將是不可回復的。\n"
-"\n"
+" %1$s %2$srawN <major><次要>\n"
+" %1$s %2$srawN/dev/<blockdevice>\n"
+" %1$s -q %2$srawN\n"
+" %1$s -qa\n"
-#: fdisk/fdiskmaclabel.c:30
-msgid ""
-"\n"
-"\tThere is a valid Mac label on this disk.\n"
-"\tUnfortunately fdisk(1) cannot handle these disks.\n"
-"\tUse either pdisk or parted to modify the partition table.\n"
-"\tNevertheless some advice:\n"
-"\t1. fdisk will destroy its contents on write.\n"
-"\t2. Be sure that this disk is NOT a still vital\n"
-"\t part of a volume group. (Otherwise you may\n"
-"\t erase the other disks as well, if unmirrored.)\n"
+#: disk-utils/raw.c:57
+msgid "Bind a raw character device to a block device.\n"
msgstr ""
-"\n"
-"\t有效的 Mac 標籤位於這個磁碟。\n"
-"\t不幸地 fdisk(1) 無法處理這些磁碟。\n"
-"\t必須使用 pdisk 或 parted 以修改分割表。\n"
-"\t不論如何還是有些建言：\n"
-"\t1.fdisk 將於寫入時銷毀它的內容。\n"
-"\t2.確認這個磁碟並非仍是\n"
-"\t 卷冊群的現用部份。(否則如果沒有鏡像備份的話，\n"
-"\t 您也許同樣會清除其他磁碟。)\n"
-
-#: fdisk/fdisksgilabel.c:84
-msgid "SGI volhdr"
-msgstr "SGI volhdr"
-#: fdisk/fdisksgilabel.c:85
-msgid "SGI trkrepl"
-msgstr "SGI trkrepl"
+#: disk-utils/raw.c:60
+#, fuzzy
+msgid " -q, --query set query mode\n"
+msgstr " -q, --query 設定查詢模式\n"
-#: fdisk/fdisksgilabel.c:86
-msgid "SGI secrepl"
-msgstr "SGI secrepl"
+#: disk-utils/raw.c:61
+#, fuzzy
+msgid " -a, --all query all raw devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: fdisk/fdisksgilabel.c:87
-msgid "SGI raw"
-msgstr "SGI raw"
+#: disk-utils/raw.c:166
+#, fuzzy, c-format
+msgid "Device '%s' is the control raw device (use raw<N> where <N> is greater than zero)"
+msgstr "裝置『%s』是控制原始裝置 (使用原始<N> 位置<N>是大於零)"
-#: fdisk/fdisksgilabel.c:88
-msgid "SGI bsd"
-msgstr "SGI bsd"
+#: disk-utils/raw.c:183
+#, fuzzy, c-format
+msgid "Cannot locate block device '%s'"
+msgstr "無法尋找位置區塊裝置『%s』"
-#: fdisk/fdisksgilabel.c:89
-msgid "SGI sysv"
-msgstr "SGI sysv"
+#: disk-utils/raw.c:186
+#, fuzzy, c-format
+msgid "Device '%s' is not a block device"
+msgstr "裝置『%s』並非區塊裝置"
-#: fdisk/fdisksgilabel.c:90
-msgid "SGI volume"
-msgstr "SGI volume"
+#: disk-utils/raw.c:195 disk-utils/raw.c:198 sys-utils/ipcrm.c:352
+#: sys-utils/ipcrm.c:366 sys-utils/ipcrm.c:380
+#, fuzzy
+msgid "failed to parse argument"
+msgstr "剖析引數時失敗"
-#: fdisk/fdisksgilabel.c:91
-msgid "SGI efs"
-msgstr "SGI efs"
+#: disk-utils/raw.c:216
+#, fuzzy, c-format
+msgid "Cannot open master raw device '%s'"
+msgstr "無法開啟主原始裝置『%s』"
-#: fdisk/fdisksgilabel.c:92
-msgid "SGI lvol"
-msgstr "SGI lvol"
+#: disk-utils/raw.c:231
+#, fuzzy, c-format
+msgid "Cannot locate raw device '%s'"
+msgstr "無法尋找位置原始裝置『%s』"
-#: fdisk/fdisksgilabel.c:93
-msgid "SGI rlvol"
-msgstr "SGI rlvol"
+#: disk-utils/raw.c:234
+#, fuzzy, c-format
+msgid "Raw device '%s' is not a character dev"
+msgstr "原始裝置『%s』並非字元 dev"
-#: fdisk/fdisksgilabel.c:94
-msgid "SGI xfs"
-msgstr "SGI xfs"
+#: disk-utils/raw.c:238
+#, fuzzy, c-format
+msgid "Device '%s' is not a raw dev"
+msgstr "裝置『%s』並非原始 dev"
-#: fdisk/fdisksgilabel.c:95
-msgid "SGI xfslog"
-msgstr "SGI xfslog"
+#: disk-utils/raw.c:248
+#, fuzzy
+msgid "Error querying raw device"
+msgstr "查詢原始裝置時發生錯誤"
-#: fdisk/fdisksgilabel.c:96
-msgid "SGI xlv"
-msgstr "SGI xlv"
+#: disk-utils/raw.c:257 disk-utils/raw.c:272
+#, fuzzy, c-format
+msgid "%sraw%d: bound to major %d, minor %d\n"
+msgstr "%sraw%d： 約束到主要的 %d，次要 %d\n"
-#: fdisk/fdisksgilabel.c:97
-msgid "SGI xvm"
-msgstr "SGI xvm"
+#: disk-utils/raw.c:271
+#, fuzzy
+msgid "Error setting raw device"
+msgstr "設定原始裝置時發生錯誤"
-#: fdisk/fdisksgilabel.c:98 fdisk/fdisksunlabel.c:43
-msgid "Linux swap"
-msgstr "Linux swap"
+#: disk-utils/resizepart.c:20
+#, fuzzy, c-format
+msgid " %s <disk device> <partition number> <length>\n"
+msgstr " %s <disk device><分割區編號><長度>\n"
-#: fdisk/fdisksgilabel.c:99 fdisk/fdisksunlabel.c:44
-msgid "Linux native"
-msgstr "Linux native"
+#: disk-utils/resizepart.c:24
+msgid "Tell the kernel about the new size of a partition.\n"
+msgstr ""
-#: fdisk/fdisksgilabel.c:100 fdisk/fdisksunlabel.c:45
-#: fdisk/i386_sys_types.c:64
-msgid "Linux LVM"
-msgstr "Linux LVM"
+#: disk-utils/resizepart.c:107
+#, fuzzy, c-format
+msgid "%s: failed to get start of the partition number %s"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisk/fdisksgilabel.c:101
-msgid "Linux RAID"
-msgstr "Linux RAID"
+#: disk-utils/resizepart.c:112
+#, fuzzy
+msgid "failed to resize partition"
+msgstr "調整大小分割時失敗"
-#: fdisk/fdisksgilabel.c:153
-#, c-format
-msgid ""
-"According to MIPS Computer Systems, Inc the Label must not contain more than "
-"512 bytes\n"
-msgstr "根據 MIPS 電腦系統公司，標籤必須包含不超過 512 位元組\n"
+#: disk-utils/sfdisk.c:235
+#, fuzzy
+msgid "failed to allocate nested libfdisk context"
+msgstr "配置迭代器時失敗"
-#: fdisk/fdisksgilabel.c:171
-#, c-format
-msgid "Detected sgi disklabel with wrong checksum.\n"
-msgstr "偵測到 sgi 磁碟標籤與錯誤的總和檢查碼。\n"
+#: disk-utils/sfdisk.c:295
+#, fuzzy, c-format
+msgid "cannot seek %s"
+msgstr "無法開啟 %s"
+
+#: disk-utils/sfdisk.c:306 libfdisk/src/bsd.c:724 libfdisk/src/bsd.c:905
+#: term-utils/script.c:461
+#, fuzzy, c-format
+msgid "cannot write %s"
+msgstr "無法寫入 %s"
-#: fdisk/fdisksgilabel.c:189
+#: disk-utils/sfdisk.c:313
#, c-format
-msgid ""
-"\n"
-"Disk %s (SGI disk label): %d heads, %llu sectors\n"
-"%d cylinders, %d physical cylinders\n"
-"%d extra sects/cyl, interleave %d:1\n"
-"%s\n"
-"Units = %s of %d * %d bytes\n"
-"\n"
+msgid "%12s (offset %5ju, size %5ju): %s"
msgstr ""
-"\n"
-"磁碟 %s (SGI 磁碟標籤)：%d 磁頭，%llu 磁區\n"
-"%d 磁柱，%d 實體磁柱\n"
-"%d 額外磁區/磁柱，交錯 %d:1\n"
-"%s\n"
-"單位 = %s 之於 %d * %d 位元組\n"
-"\n"
-#: fdisk/fdisksgilabel.c:201
-#, c-format
-msgid ""
-"\n"
-"Disk %s (SGI disk label): %d heads, %llu sectors, %d cylinders\n"
-"Units = %s of %d * %d bytes\n"
-"\n"
+#: disk-utils/sfdisk.c:319
+#, fuzzy, c-format
+msgid "%s: failed to create a backup"
+msgstr "%s：無法寫入標籤"
+
+#: disk-utils/sfdisk.c:332
+#, fuzzy
+msgid "failed to create a backup file, $HOME undefined"
+msgstr "%s：無法寫入標籤"
+
+#: disk-utils/sfdisk.c:358
+msgid "Backup files:"
msgstr ""
-"\n"
-"磁碟 %s (SGI 磁碟標籤)：%d 磁頭，%llu 磁區，%d 磁柱\n"
-"單位 = %s 之於 %d * %d 位元組\n"
-"\n"
-#: fdisk/fdisksgilabel.c:208
-#, c-format
-msgid ""
-"----- partitions -----\n"
-"Pt# %*s Info Start End Sectors Id System\n"
+#: disk-utils/sfdisk.c:385
+#, fuzzy
+msgid "failed to read new partition from device; ignoring --move-data"
+msgstr "%s：無法讀取分割表"
+
+#: disk-utils/sfdisk.c:387
+#, fuzzy
+msgid "failed to get size of the new partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
+
+#: disk-utils/sfdisk.c:389
+#, fuzzy
+msgid "failed to get start of the new partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
+
+#: disk-utils/sfdisk.c:391
+#, fuzzy
+msgid "failed to get size of the old partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
+
+#: disk-utils/sfdisk.c:393
+#, fuzzy
+msgid "failed to get start of the old partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
+
+#: disk-utils/sfdisk.c:395
+#, fuzzy
+msgid "start of the partition has not been moved; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
+
+#: disk-utils/sfdisk.c:397
+msgid "new partition is smaller than original; ignoring --move-data"
msgstr ""
-"----- 分割區 -----\n"
-"Pt# %*s 資訊 開始 結束 磁區 識別號 系統\n"
-#: fdisk/fdisksgilabel.c:230
-#, c-format
-msgid ""
-"----- Bootinfo -----\n"
-"Bootfile: %s\n"
-"----- Directory Entries -----\n"
+#: disk-utils/sfdisk.c:450
+msgid "Data move: (--no-act)"
msgstr ""
-"----- 開機資訊 -----\n"
-"開機檔案：%s\n"
-"----- 目錄項目 -----\n"
-#: fdisk/fdisksgilabel.c:238
-#, c-format
-msgid "%2d: %-10s sector%5u size%8u\n"
-msgstr "%2d: %-10s 磁區%5u 大小%8u\n"
+#: disk-utils/sfdisk.c:450
+msgid "Data move:"
+msgstr ""
-#: fdisk/fdisksgilabel.c:292
-#, c-format
-msgid ""
-"\n"
-"Invalid Bootfile!\n"
-"\tThe bootfile must be an absolute non-zero pathname,\n"
-"\te.g. \"/unix\" or \"/unix.save\".\n"
-msgstr ""
-"\n"
-"無效的開機檔案！\n"
-"\t開機檔案名稱必須是絕對且非零路徑，\n"
-"\t例如「/unix」或「/unix.save」。\n"
+#: disk-utils/sfdisk.c:453
+#, fuzzy, c-format
+msgid " typescript file: %s"
+msgstr "無法開啟 typescript 檔案 %s"
-#: fdisk/fdisksgilabel.c:298
+#: disk-utils/sfdisk.c:454
#, c-format
-msgid ""
-"\n"
-"\tName of Bootfile too long: 16 bytes maximum.\n"
+msgid " start sector: (from/to) %ju / %ju\n"
msgstr ""
-"\n"
-"\t開機檔案的名稱太長：最大為 16 位元組。\n"
-#: fdisk/fdisksgilabel.c:303
-#, c-format
-msgid ""
-"\n"
-"\tBootfile must have a fully qualified pathname.\n"
+#: disk-utils/sfdisk.c:455
+#, fuzzy, c-format
+msgid " sectors: %ju\n"
+msgstr "，%llu 磁區\n"
+
+#: disk-utils/sfdisk.c:456
+#, fuzzy, c-format
+msgid " step size: %zu bytes\n"
+msgstr "以位元組為單位取得大小"
+
+#: disk-utils/sfdisk.c:466
+#, fuzzy
+msgid "Do you want to move partition data?"
+msgstr "您要將這個寫入磁碟嗎？[ynq] "
+
+#: disk-utils/sfdisk.c:468 disk-utils/sfdisk.c:1890
+msgid "Leaving."
msgstr ""
-"\n"
-"\t開機檔案必須有完全合法的路徑名稱。\n"
-#: fdisk/fdisksgilabel.c:310
+#: disk-utils/sfdisk.c:554
#, c-format
-msgid ""
-"\n"
-"\tBe aware, that the bootfile is not checked for existence.\n"
-"\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n"
+msgid "Moved %ju from %ju sectors (%.3f%%, %.1f MiB/s)."
msgstr ""
-"\n"
-"\t要知道，開機檔案並未檢查是否存在。\n"
-"\tSGI 預設為「/unix」和用於備份的「/unix.save」。\n"
-#: fdisk/fdisksgilabel.c:321
+#: disk-utils/sfdisk.c:559 disk-utils/sfdisk.c:577
#, c-format
-msgid ""
-"\n"
-"The current boot file is: %s\n"
+msgid "Moved %ju from %ju sectors (%.3f%%)."
msgstr ""
-"\n"
-"目前的啟動檔案為：%s\n"
-#: fdisk/fdisksgilabel.c:322
-msgid "Please enter the name of the new boot file: "
-msgstr "請輸入新的啟動檔案名稱："
+#: disk-utils/sfdisk.c:589
+msgid "Your data has not been moved (--no-act)."
+msgstr ""
-#: fdisk/fdisksgilabel.c:323
-#, c-format
-msgid "Boot file unchanged\n"
-msgstr "啟動檔案未變更\n"
+#: disk-utils/sfdisk.c:594
+#, fuzzy, c-format
+msgid "%s: failed to move data"
+msgstr "設定路徑時失敗"
-#: fdisk/fdisksgilabel.c:337
-#, c-format
+#: disk-utils/sfdisk.c:609
+#, fuzzy
+msgid "The partition table is unchanged (--no-act)."
+msgstr ""
+"分割表已變更！\n"
+"\n"
+
+#: disk-utils/sfdisk.c:617
+#, fuzzy
msgid ""
"\n"
-"\tBootfile is changed to \"%s\".\n"
+"The partition table has been altered."
msgstr ""
+"分割表已變更！\n"
"\n"
-"\t開機檔案已變更為「%s」。\n"
-
-#: fdisk/fdisksgilabel.c:427
-#, c-format
-msgid "More than one entire disk entry present.\n"
-msgstr "存在多於一個完整磁碟項目。\n"
-#: fdisk/fdisksgilabel.c:434 fdisk/fdisksunlabel.c:350
-#, c-format
-msgid "No partitions defined\n"
-msgstr "無已定義分割區\n"
-
-#: fdisk/fdisksgilabel.c:440
-#, c-format
-msgid "IRIX likes when Partition 11 covers the entire disk.\n"
-msgstr "IRIX 偏好分割區 11 涵蓋整個磁碟。\n"
+#: disk-utils/sfdisk.c:700
+#, fuzzy, c-format
+msgid "unsupported label '%s'"
+msgstr "不受支援的引數：%s"
-#: fdisk/fdisksgilabel.c:442
-#, c-format
+#: disk-utils/sfdisk.c:703
msgid ""
-"The entire disk partition should start at block 0,\n"
-"not at diskblock %d.\n"
+"Id Name\n"
+"\n"
msgstr ""
-"整個磁碟分割區應該始於區塊 0，\n"
-"而非磁碟區塊 %d。\n"
+"識別號 名稱\n"
+"\n"
-#: fdisk/fdisksgilabel.c:448
-#, c-format
-msgid ""
-"The entire disk partition is only %d diskblock large,\n"
-"but the disk is %d diskblocks long.\n"
-msgstr ""
-"整個磁碟分割區大小只有 %d 磁碟區塊，\n"
-"但是這個磁碟大小為 %d 磁碟區塊。\n"
+#: disk-utils/sfdisk.c:733
+#, fuzzy
+msgid "unrecognized partition table type"
+msgstr " %s: 無法辨識的分割表類型\n"
-#: fdisk/fdisksgilabel.c:454
+#: disk-utils/sfdisk.c:786
#, fuzzy, c-format
-msgid "Partition 11 should cover the entire disk.\n"
-msgstr "一個分割區 (#11) 應該涵蓋整個磁碟。\n"
+msgid "Cannot get size of %s"
+msgstr "無法提取大小的 %s"
-#: fdisk/fdisksgilabel.c:464
-#, c-format
-msgid "Partition %d does not start on cylinder boundary.\n"
-msgstr "分割區 %d 並非始於磁柱邊界。\n"
+#: disk-utils/sfdisk.c:823
+#, fuzzy, c-format
+msgid "total: %ju blocks\n"
+msgstr "總計：%llu 區塊\n"
-#: fdisk/fdisksgilabel.c:470
-#, c-format
-msgid "Partition %d does not end on cylinder boundary.\n"
-msgstr "分割區 %d 並非終於磁柱邊界。\n"
+#: disk-utils/sfdisk.c:885 disk-utils/sfdisk.c:968 disk-utils/sfdisk.c:1009
+#: disk-utils/sfdisk.c:1039 disk-utils/sfdisk.c:1106 disk-utils/sfdisk.c:1170
+#: disk-utils/sfdisk.c:1225 disk-utils/sfdisk.c:1281 disk-utils/sfdisk.c:1637
+#, fuzzy
+msgid "no disk device specified"
+msgstr "沒有迴圈裝置指定的"
-#: fdisk/fdisksgilabel.c:477
-#, c-format
-msgid "The Partition %d and %d overlap by %d sectors.\n"
-msgstr "分割區 %d 與 %d 有 %d 塊磁區相互重疊。\n"
+#: disk-utils/sfdisk.c:897
+msgid "toggle boot flags is unsupported for Hybrid GPT/MBR"
+msgstr ""
-#: fdisk/fdisksgilabel.c:485 fdisk/fdisksgilabel.c:506
-#, c-format
-msgid "Unused gap of %8u sectors - sectors %8u-%u\n"
-msgstr "%8u 塊磁區的未使用間隙 - 磁區 %8u-%u\n"
+#: disk-utils/sfdisk.c:902
+#, fuzzy
+msgid "cannot switch to PMBR"
+msgstr "無法識別「%s」狀態"
-#: fdisk/fdisksgilabel.c:517
-#, c-format
-msgid ""
-"\n"
-"The boot partition does not exist.\n"
+#: disk-utils/sfdisk.c:903
+msgid "Activation is unsupported for GPT -- entering nested PMBR."
msgstr ""
-"\n"
-"開機分割區不存在。\n"
-#: fdisk/fdisksgilabel.c:520
-#, c-format
-msgid ""
-"\n"
-"The swap partition does not exist.\n"
+#: disk-utils/sfdisk.c:906
+msgid "toggle boot flags is supported for MBR or PMBR only"
msgstr ""
-"\n"
-"交換分割區不存在。\n"
-#: fdisk/fdisksgilabel.c:524
+#: disk-utils/sfdisk.c:941 disk-utils/sfdisk.c:988 disk-utils/sfdisk.c:1111
+#: disk-utils/sfdisk.c:1175 disk-utils/sfdisk.c:1230 disk-utils/sfdisk.c:1286
+#: disk-utils/sfdisk.c:1635 disk-utils/sfdisk.c:2139
+#, fuzzy
+msgid "failed to parse partition number"
+msgstr "%s：無法提取分割區編號"
+
+#: disk-utils/sfdisk.c:946
#, c-format
-msgid ""
-"\n"
-"The swap partition has no swap type.\n"
+msgid "%s: partition %d: failed to toggle bootable flag"
msgstr ""
-"\n"
-"交換分割區不具有交換類型。\n"
-#: fdisk/fdisksgilabel.c:527
-#, c-format
-msgid "\tYou have chosen an unusual boot file name.\n"
-msgstr "\t您選擇了一個不尋常的啟動檔案名稱。\n"
+#: disk-utils/sfdisk.c:983 disk-utils/sfdisk.c:991
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to delete"
+msgstr "%s：無法提取分割區編號"
-#: fdisk/fdisksgilabel.c:536
+#: disk-utils/sfdisk.c:1046
#, fuzzy, c-format
-msgid "Sorry, only for non-empty partitions you can change the tag.\n"
-msgstr "抱歉，只有系統管理者可以變更系統時鐘。\n"
+msgid "%s: does not contain a recognized partition table"
+msgstr "裝置不包含辨識的分割表\n"
-#: fdisk/fdisksgilabel.c:542
-msgid ""
-"It is highly recommended that the partition at offset 0\n"
-"is of type \"SGI volhdr\", the IRIX system will rely on it to\n"
-"retrieve from its directory standalone tools like sash and fx.\n"
-"Only the \"SGI volume\" entire disk section may violate this.\n"
-"Type YES if you are sure about tagging this partition differently.\n"
-msgstr ""
-"強烈建議位於偏移 0 的分割區\n"
-"類型為「SGI volhdr」，IRIX 系統將會依靠它以\n"
-"取回它的目錄獨立工具，諸如 sash 和 fx。\n"
-"只有「SGI 卷冊」整個磁碟區段的話，也許會對此有所妨害。\n"
-"如果您確定將這個分割區貼上不同的標籤，就輸入 YES。\n"
+#: disk-utils/sfdisk.c:1050
+#, fuzzy
+msgid "failed to allocate dump struct"
+msgstr "callocate cpu 集合時失敗"
-#: fdisk/fdisksgilabel.c:547 fdisk/fdisksunlabel.c:517
-msgid "YES\n"
-msgstr "YES\n"
+#: disk-utils/sfdisk.c:1054
+#, fuzzy, c-format
+msgid "%s: failed to dump partition table"
+msgstr "%s：無法讀取分割表"
-#: fdisk/fdisksgilabel.c:572
+#: disk-utils/sfdisk.c:1084
#, fuzzy, c-format
-msgid "Partition overlap on the disk.\n"
-msgstr "您的磁碟上有重疊的分割區，請先修正它！\n"
+msgid "%s: no partition table found"
+msgstr "無分割表。\n"
-#: fdisk/fdisksgilabel.c:632
-#, c-format
-msgid "Attempting to generate entire disk entry automatically.\n"
-msgstr "試圖自動產生整個磁碟項目。\n"
+#: disk-utils/sfdisk.c:1088
+#, fuzzy, c-format
+msgid "%s: partition %zu: partition table contains only %zu partitions"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisksgilabel.c:637
-#, c-format
-msgid "The entire disk is already covered with partitions.\n"
-msgstr "整個磁碟已經被分割區所覆蓋。\n"
+#: disk-utils/sfdisk.c:1091
+#, fuzzy, c-format
+msgid "%s: partition %zu: partition is unused"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisksgilabel.c:641
-#, c-format
-msgid "You got a partition overlap on the disk. Fix it first!\n"
-msgstr "您的磁碟上有重疊的分割區，請先修正它！\n"
+#: disk-utils/sfdisk.c:1110 disk-utils/sfdisk.c:1174 disk-utils/sfdisk.c:1229
+#: disk-utils/sfdisk.c:1285
+#, fuzzy
+msgid "no partition number specified"
+msgstr "未指定任何動作"
-#: fdisk/fdisksgilabel.c:650 fdisk/fdisksgilabel.c:679
-#, c-format
-msgid ""
-"It is highly recommended that eleventh partition\n"
-"covers the entire disk and is of type `SGI volume'\n"
-msgstr ""
-"強烈建議第十一塊分割區\n"
-"覆蓋整個磁碟並且為「SGI 卷冊」類型\n"
+#: disk-utils/sfdisk.c:1116 disk-utils/sfdisk.c:1180 disk-utils/sfdisk.c:1235
+#: disk-utils/sfdisk.c:1291 sys-utils/losetup.c:778
+#, fuzzy
+msgid "unexpected arguments"
+msgstr "未預期的引數數量"
-#: fdisk/fdisksgilabel.c:666
-#, c-format
-msgid "You will get a partition overlap on the disk. Fix it first!\n"
-msgstr "您的磁碟上將會有重疊的分割區，請先修正它！\n"
+#: disk-utils/sfdisk.c:1131
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to get partition type"
+msgstr "%s：無法提取分割區編號"
-#: fdisk/fdisksgilabel.c:671
-#, c-format
-msgid " Last %s"
-msgstr " 最後一筆 %s"
+#: disk-utils/sfdisk.c:1150
+#, fuzzy, c-format
+msgid "failed to parse %s partition type '%s'"
+msgstr "剖析機能『%s 時失敗』"
-#: fdisk/fdisksgilabel.c:701
-#, c-format
-msgid "Building a new SGI disklabel.\n"
-msgstr ""
+#: disk-utils/sfdisk.c:1154
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to set partition type"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisksgilabel.c:722 fdisk/fdisksunlabel.c:190
-#, c-format
-msgid ""
-"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of "
-"%d.\n"
-"This value may be truncated for devices > 33.8 GB.\n"
-msgstr ""
-"警告： BLKGETSIZE ioctl 於 %s 處失敗。使用磁柱的物理位置值 %d。\n"
-"這個值用於 >33.8 GB 的裝置時也許會被截斷。\n"
+#: disk-utils/sfdisk.c:1192
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to get partition UUID"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisksgilabel.c:737
-#, c-format
-msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
-msgstr "識別號=%02x\t開始=%d\t長度=%d\n"
+#: disk-utils/sfdisk.c:1205 disk-utils/sfdisk.c:1260 disk-utils/sfdisk.c:1314
+#, fuzzy
+msgid "failed to allocate partition object"
+msgstr "配置迭代器時失敗"
-#: fdisk/fdisksgilabel.c:745
+#: disk-utils/sfdisk.c:1209
#, fuzzy, c-format
-msgid "Trying to keep parameters of partitions already set.\n"
-msgstr "試著保持分割區的參數 %d。\n"
+msgid "%s: partition %zu: failed to set partition UUID"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisksunlabel.c:31
-msgid "Unassigned"
-msgstr "未指定"
+#: disk-utils/sfdisk.c:1247
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to get partition name"
+msgstr "%s：無法提取分割區編號"
-#: fdisk/fdisksunlabel.c:33
-msgid "SunOS root"
-msgstr "SunOS 根分割區"
+#: disk-utils/sfdisk.c:1264
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to set partition name"
+msgstr "%s：無法提取分割區編號"
-#: fdisk/fdisksunlabel.c:34
-msgid "SunOS swap"
-msgstr "SunOS 交換分割區"
+#: disk-utils/sfdisk.c:1318
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to set partition attributes"
+msgstr "%s：分割表不具任何分割區"
-#: fdisk/fdisksunlabel.c:35
-msgid "SunOS usr"
-msgstr "SunOS usr 分割區"
+#: disk-utils/sfdisk.c:1361
+#, fuzzy
+msgid " Commands:\n"
+msgstr "沒有命令？"
-#: fdisk/fdisksunlabel.c:36
-msgid "Whole disk"
-msgstr "整顆磁碟"
+#: disk-utils/sfdisk.c:1363
+#, fuzzy
+msgid " write write table to disk and exit\n"
+msgstr "寫入表格到磁碟然後離開"
-#: fdisk/fdisksunlabel.c:37
-msgid "SunOS stand"
-msgstr "SunOS stand 分割區"
+#: disk-utils/sfdisk.c:1364
+msgid " quit show new situation and wait for user's feedback before write\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:38
-msgid "SunOS var"
-msgstr "SunOS var 分割區"
+#: disk-utils/sfdisk.c:1365
+msgid " abort exit sfdisk shell\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:39
-msgid "SunOS home"
-msgstr "SunOS home 分割區"
+#: disk-utils/sfdisk.c:1366
+#, fuzzy
+msgid " print display the partition table\n"
+msgstr " p 印出 BSD 分割表"
-#: fdisk/fdisksunlabel.c:40
-msgid "SunOS alt sectors"
-msgstr "SunOS alt 磁區"
+#: disk-utils/sfdisk.c:1367
+#, fuzzy
+msgid " help show this help text\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: fdisk/fdisksunlabel.c:41
-msgid "SunOS cachefs"
-msgstr "SunOS 快取檔案系統"
+#: disk-utils/sfdisk.c:1369
+msgid " Ctrl-D the same as 'quit'\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:42
-msgid "SunOS reserved"
-msgstr "SunOS 保留區"
+#: disk-utils/sfdisk.c:1373
+#, fuzzy
+msgid " Input format:\n"
+msgstr "輸出格式：\n"
-#: fdisk/fdisksunlabel.c:46 fdisk/i386_sys_types.c:104
-msgid "Linux raid autodetect"
-msgstr "Linux raid 自動偵測"
+#: disk-utils/sfdisk.c:1375
+msgid " <start>, <size>, <type>, <bootable>\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:105
-#, c-format
+#: disk-utils/sfdisk.c:1378
msgid ""
-"Detected sun disklabel with wrong checksum.\n"
-"Probably you'll have to set all the values,\n"
-"e.g. heads, sectors, cylinders and partitions\n"
-"or force a fresh label (s command in main menu)\n"
+" <start> Beginning of the partition in sectors, or bytes if\n"
+" specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
+" The default is the first free space.\n"
msgstr ""
-"偵測到具有錯誤總和檢查碼的 sun 磁碟標籤。\n"
-"也許您必須設定所有的值，\n"
-"例如：磁頭、磁區、磁柱和分割區，\n"
-"或是強制設定新的標籤 (使用主選單的 s 命令)\n"
-
-#: fdisk/fdisksunlabel.c:117
-#, c-format
-msgid "Detected sun disklabel with wrong version [0x%08x].\n"
-msgstr "偵測到具有錯誤版本 [0x%08x] 的 sun 磁碟標籤。\n"
-#: fdisk/fdisksunlabel.c:122
-#, c-format
-msgid "Detected sun disklabel with wrong sanity [0x%08x].\n"
-msgstr "偵測到具有不完整性 [0x%08x] 的 sun 磁碟標籤。\n"
+#: disk-utils/sfdisk.c:1383
+msgid ""
+" <size> Size of the partition in sectors, or bytes if\n"
+" specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
+" The default is all available space.\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:127
-#, c-format
-msgid "Detected sun disklabel with wrong num_partitions [%u].\n"
-msgstr "偵測到具有錯誤分割區數 [%u] 的 sun 磁碟標籤。\n"
+#: disk-utils/sfdisk.c:1388
+msgid " <type> The partition type. Default is a Linux data partition.\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:132
-#, c-format
-msgid ""
-"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n"
-msgstr "警告：錯誤值需要經由 w(rite) 而修正\n"
+#: disk-utils/sfdisk.c:1389
+msgid " MBR: hex or L,S,E,X,U,R,V shortcuts.\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:160
-#, fuzzy, c-format
-msgid "Building a new Sun disklabel.\n"
-msgstr "%s 不含任何磁碟標籤。\n"
+#: disk-utils/sfdisk.c:1390
+msgid " GPT: UUID or L,S,H,U,R,V shortcuts.\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:199
-msgid "Sectors/track"
-msgstr "磁區/磁軌"
+#: disk-utils/sfdisk.c:1393
+#, fuzzy
+msgid " <bootable> Use '*' to mark an MBR partition as bootable.\n"
+msgstr "您將不能寫入分割表。\n"
-#: fdisk/fdisksunlabel.c:313
-#, c-format
-msgid "Partition %d doesn't end on cylinder boundary\n"
-msgstr "分割區 %d 並非結束於磁柱邊界\n"
+#: disk-utils/sfdisk.c:1397
+msgid " Example:\n"
+msgstr ""
-#: fdisk/fdisksunlabel.c:333
-#, c-format
-msgid "Partition %d overlaps with others in sectors %d-%d\n"
-msgstr "分割區 %d 與 %d-%d 中的其他磁區重疊\n"
+#: disk-utils/sfdisk.c:1399
+#, fuzzy
+msgid " , 4G Creates a 4GiB partition at default start offset.\n"
+msgstr " n 由剩餘空間中新增一塊分割區"
-#: fdisk/fdisksunlabel.c:355
-#, c-format
-msgid "Unused gap - sectors 0-%d\n"
-msgstr "未使用的間隙 - 磁區 0-%d\n"
+#: disk-utils/sfdisk.c:1431 sys-utils/dmesg.c:1559
+#, fuzzy
+msgid "unsupported command"
+msgstr "不受支援的命令"
-#: fdisk/fdisksunlabel.c:357 fdisk/fdisksunlabel.c:363
-#, c-format
-msgid "Unused gap - sectors %d-%d\n"
-msgstr "未使用的間隙 - 磁區 %d-%d\n"
+#: disk-utils/sfdisk.c:1433
+#, fuzzy, c-format
+msgid "line %d: unsupported command"
+msgstr "不受支援的命令"
-#: fdisk/fdisksunlabel.c:389
+#: disk-utils/sfdisk.c:1549
#, c-format
-msgid ""
-"Other partitions already cover the whole disk.\n"
-"Delete some/shrink them before retry.\n"
+msgid "The device contains '%s' signature and it will be removed by a write command. See sfdisk(8) man page and --wipe option for more details."
msgstr ""
-"其他分割區已經涵蓋整個磁碟。\n"
-"請於重試之前刪除部份或縮減它們。\n"
-#: fdisk/fdisksunlabel.c:412
+#: disk-utils/sfdisk.c:1556
#, c-format
-msgid ""
-"It is highly recommended that the third partition covers the whole disk\n"
-"and is of type `Whole disk'\n"
+msgid "The device contains '%s' signature and it may remain on the device. It is recommended to wipe the device with wipefs(8) or sfdisk --wipe, in order to avoid possible collisions."
msgstr ""
-"強烈建議第三分割區包括\n"
-"整個磁碟並且為「整顆磁碟」類型\n"
-#: fdisk/fdisksunlabel.c:440
-#, c-format
-msgid "Sector %d is already allocated\n"
-msgstr "磁區 %d 已經被配置\n"
+#: disk-utils/sfdisk.c:1604
+#, fuzzy
+msgid "failed to allocate partition name"
+msgstr "加入分割時失敗"
+
+#: disk-utils/sfdisk.c:1645
+#, fuzzy
+msgid "failed to allocate script handler"
+msgstr "配置迭代器時失敗"
+
+#: disk-utils/sfdisk.c:1661
+#, fuzzy, c-format
+msgid "%s: cannot modify partition %d: no partition table was found"
+msgstr "%s：無法讀取分割表"
+
+#: disk-utils/sfdisk.c:1666
+#, fuzzy, c-format
+msgid "%s: cannot modify partition %d: partition table contains only %zu partitions"
+msgstr "%s：分割表不具任何分割區"
+
+#: disk-utils/sfdisk.c:1672
+#, fuzzy, c-format
+msgid "warning: %s: partition %d is not defined yet"
+msgstr "尚無分割區被定義！\n"
-#: fdisk/fdisksunlabel.c:470
+#: disk-utils/sfdisk.c:1690
#, c-format
msgid ""
-"You haven't covered the whole disk with the 3rd partition, but your value\n"
-"%d %s covers some other partition. Your entry has been changed\n"
-"to %d %s\n"
+"\n"
+"Welcome to sfdisk (%s)."
msgstr ""
-"您未以第三分割區涵蓋整個磁碟，但是您設定的值\n"
-"%d %s 涵蓋某些其他的分割區。您的輸入值已變更\n"
-"為 %d %s\n"
-#: fdisk/fdisksunlabel.c:497
-#, c-format
+#: disk-utils/sfdisk.c:1698
+#, fuzzy
+msgid "Checking that no-one is using this disk right now ..."
+msgstr "檢查是否沒有人現在正使用這個磁碟…\n"
+
+#: disk-utils/sfdisk.c:1701
msgid ""
-"If you want to maintain SunOS/Solaris compatibility, consider leaving this\n"
-"partition as Whole disk (5), starting at 0, with %u sectors\n"
+" FAILED\n"
+"\n"
msgstr ""
-"如果您要維持 SunOS/Solaris 的相容性，請考慮保持這個\n"
-"分割區為整個磁碟 (5)，開始於 0, 具備 %u 磁區\n"
-#: fdisk/fdisksunlabel.c:512
+#: disk-utils/sfdisk.c:1704
+#, fuzzy
msgid ""
-"It is highly recommended that the partition at offset 0\n"
-"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
-"there may destroy your partition table and bootblock.\n"
-"Type YES if you're very sure you would like that partition\n"
-"tagged with 82 (Linux swap): "
-msgstr ""
-"強烈建議位於偏移值 0 的分割區\n"
-"為 UFS、EXT2FS 檔案系統或 SunOS 交換區。將 Linux 交換區放在\n"
-"那裏也許會銷毀您的分割表和啟動區塊。\n"
-"如果您很確定想要該分割區被\n"
-"標示為 82 (Linux 交換區) 就輸入 YES："
+"This disk is currently in use - repartitioning is probably a bad idea.\n"
+"Umount all file systems, and swapoff all swap partitions on this disk.\n"
+"Use the --no-reread flag to suppress this check.\n"
+msgstr ""
+"\n"
+"這個磁碟目前在使用中 - 重新設定分割區可能不是個好主意。\n"
+"卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n"
+"使用 --no-reread 旗標以抑制這個檢查。\n"
-#: fdisk/fdisksunlabel.c:544
-#, c-format
+#: disk-utils/sfdisk.c:1709
+#, fuzzy
+msgid "Use the --force flag to overrule all checks."
+msgstr "使用 --force 旗標以駁回所有檢查。\n"
+
+#: disk-utils/sfdisk.c:1711
+#, fuzzy
msgid ""
+" OK\n"
"\n"
-"Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
-"%u cylinders, %d alternate cylinders, %d physical cylinders\n"
-"%d extra sects/cyl, interleave %d:1\n"
-"Label ID: %s\n"
-"Volume ID: %s\n"
-"Units = %s of %d * 512 bytes\n"
-"\n"
-msgstr ""
-"\n"
-"磁碟 %s (Sun 磁碟標籤)：%u 磁頭，%llu 磁區，每分鐘轉速 %d\n"
-"%u 磁柱，%d 替代磁柱，%d 實體磁柱\n"
-"%d 額外磁區/磁柱，交錯 %d:1\n"
-"標籤識別號：%s\n"
-"卷冊識別號：%s\n"
-"單位 = %s 之於 %d * 512 位元組\n"
+msgstr "%s：確定\n"
+
+#: disk-utils/sfdisk.c:1723
+#, fuzzy
+msgid ""
"\n"
+"Old situation:"
+msgstr "舊的情況：\n"
-#: fdisk/fdisksunlabel.c:560
+#: disk-utils/sfdisk.c:1741
#, c-format
msgid ""
"\n"
-"Disk %s (Sun disk label): %u heads, %llu sectors, %u cylinders\n"
-"Units = %s of %d * 512 bytes\n"
-"\n"
+"sfdisk is going to create a new '%s' disk label.\n"
+"Use 'label: <name>' before you define a first partition\n"
+"to override the default."
msgstr ""
-"\n"
-"磁碟 %s (Sun 磁碟標籤)：%u 磁頭，%llu 磁區，%u 磁柱\n"
-"單位 = %s 之於 %d * 512 位元組\n"
-"\n"
-
-#: fdisk/fdisksunlabel.c:565
-#, c-format
-msgid "%*s Flag Start End Blocks Id System\n"
-msgstr "%*s 旗標 開始 結束 區塊 識別號 系統\n"
-#: fdisk/fdisksunlabel.c:593
-msgid "Number of alternate cylinders"
-msgstr "替代磁柱數量"
+#: disk-utils/sfdisk.c:1744
+#, fuzzy
+msgid ""
+"\n"
+"Type 'help' to get more information.\n"
+msgstr "嘗試『%s --help』以獲得更多資訊。\n"
-#: fdisk/fdisksunlabel.c:605
-msgid "Extra sectors per cylinder"
-msgstr "每磁柱的額外磁區"
+#: disk-utils/sfdisk.c:1762
+#, fuzzy
+msgid "All partitions used."
+msgstr "這個分割區已在使用中"
-#: fdisk/fdisksunlabel.c:612
-msgid "Interleave factor"
-msgstr "交錯因子"
+#: disk-utils/sfdisk.c:1790
+#, fuzzy
+msgid "Done.\n"
+msgstr "完成。\n"
-#: fdisk/fdisksunlabel.c:619
-msgid "Rotation speed (rpm)"
-msgstr "旋轉速度 (rpm)"
+#: disk-utils/sfdisk.c:1802
+#, fuzzy
+msgid "Ignoring partition."
+msgstr "已選分割區 %d\n"
-#: fdisk/fdisksunlabel.c:626
-msgid "Number of physical cylinders"
-msgstr "實體磁柱數量"
+#: disk-utils/sfdisk.c:1811 disk-utils/sfdisk.c:1871
+msgid "Failed to apply script headers, disk label not created."
+msgstr ""
-#: fdisk/i386_sys_types.c:6
-msgid "Empty"
-msgstr "空"
+#: disk-utils/sfdisk.c:1830
+#, fuzzy, c-format
+msgid "Failed to add #%d partition"
+msgstr "加入分割時失敗"
-#: fdisk/i386_sys_types.c:7
-msgid "FAT12"
-msgstr "FAT12"
+#: disk-utils/sfdisk.c:1853
+msgid "Script header accepted."
+msgstr ""
-#: fdisk/i386_sys_types.c:8
-msgid "XENIX root"
-msgstr "XENIX root"
+#: disk-utils/sfdisk.c:1878
+#, fuzzy
+msgid ""
+"\n"
+"New situation:"
+msgstr "新的情況：\n"
-#: fdisk/i386_sys_types.c:9
-msgid "XENIX usr"
-msgstr "XENIX usr"
+#: disk-utils/sfdisk.c:1888
+#, fuzzy
+msgid "Do you want to write this to disk?"
+msgstr "您要將這個寫入磁碟嗎？[ynq] "
-#: fdisk/i386_sys_types.c:10
-msgid "FAT16 <32M"
-msgstr "FAT16 <32M"
+#: disk-utils/sfdisk.c:1901
+msgid "Leaving.\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:11
-msgid "Extended"
-msgstr "延伸"
+#: disk-utils/sfdisk.c:1915
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] <dev> [[-N] <part>]\n"
+" %1$s [options] <command>\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
-#: fdisk/i386_sys_types.c:12
-msgid "FAT16"
-msgstr "FAT16"
+#: disk-utils/sfdisk.c:1922
+msgid " -A, --activate <dev> [<part> ...] list or set bootable (P)MBR partitions\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:13
+#: disk-utils/sfdisk.c:1923
#, fuzzy
-msgid "HPFS/NTFS/exFAT"
-msgstr "HPFS/NTFS"
-
-#: fdisk/i386_sys_types.c:14
-msgid "AIX"
-msgstr "AIX"
-
-#: fdisk/i386_sys_types.c:15
-msgid "AIX bootable"
-msgstr "AIX 可開機"
+msgid " -d, --dump <dev> dump partition table (usable for later input)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: fdisk/i386_sys_types.c:16
-msgid "OS/2 Boot Manager"
-msgstr "OS/2 開機管理員"
+#: disk-utils/sfdisk.c:1924
+#, fuzzy
+msgid " -J, --json <dev> dump partition table in JSON format\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: fdisk/i386_sys_types.c:17
-msgid "W95 FAT32"
-msgstr "W95 FAT32"
+#: disk-utils/sfdisk.c:1925
+msgid " -g, --show-geometry [<dev> ...] list geometry of all or specified devices\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:18
-msgid "W95 FAT32 (LBA)"
-msgstr "W95 FAT32 (LBA)"
+#: disk-utils/sfdisk.c:1926
+#, fuzzy
+msgid " -l, --list [<dev> ...] list partitions of each device\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/i386_sys_types.c:19
-msgid "W95 FAT16 (LBA)"
-msgstr "W95 FAT16 (LBA)"
+#: disk-utils/sfdisk.c:1927
+#, fuzzy
+msgid " -F, --list-free [<dev> ...] list unpartitioned free areas of each device\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/i386_sys_types.c:20
-msgid "W95 Ext'd (LBA)"
-msgstr "W95 Ext'd (LBA)"
+#: disk-utils/sfdisk.c:1928
+#, fuzzy
+msgid " -r, --reorder <dev> fix partitions order (by start offset)\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisk/i386_sys_types.c:21
-msgid "OPUS"
-msgstr "OPUS"
+#: disk-utils/sfdisk.c:1929
+#, fuzzy
+msgid " -s, --show-size [<dev> ...] list sizes of all or specified devices\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: fdisk/i386_sys_types.c:22
-msgid "Hidden FAT12"
-msgstr "隱藏 FAT12"
+#: disk-utils/sfdisk.c:1930
+#, fuzzy
+msgid " -T, --list-types print the recognized types (see -X)\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: fdisk/i386_sys_types.c:23
-msgid "Compaq diagnostics"
-msgstr "Compaq 診斷"
+#: disk-utils/sfdisk.c:1931
+#, fuzzy
+msgid " -V, --verify [<dev> ...] test whether partitions seem correct\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: fdisk/i386_sys_types.c:24
-msgid "Hidden FAT16 <32M"
-msgstr "隱藏 FAT16 <32M"
+#: disk-utils/sfdisk.c:1932
+msgid " --delete <dev> [<part> ...] delete all or specified partitions\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:25
-msgid "Hidden FAT16"
-msgstr "隱藏 FAT16"
+#: disk-utils/sfdisk.c:1935
+msgid " --part-label <dev> <part> [<str>] print or change partition label\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:26
-msgid "Hidden HPFS/NTFS"
-msgstr "隱藏 HPFS/NTFS"
+#: disk-utils/sfdisk.c:1936
+msgid " --part-type <dev> <part> [<type>] print or change partition type\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:27
-msgid "AST SmartSleep"
-msgstr "AST 智慧休眠"
+#: disk-utils/sfdisk.c:1937
+#, fuzzy
+msgid " --part-uuid <dev> <part> [<uuid>] print or change partition uuid\n"
+msgstr " -c [或 --id]： 印出或變更分割區識別號"
-#: fdisk/i386_sys_types.c:28
-msgid "Hidden W95 FAT32"
-msgstr "隱藏 W95 FAT32"
+#: disk-utils/sfdisk.c:1938
+msgid " --part-attrs <dev> <part> [<str>] print or change partition attributes\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:29
-msgid "Hidden W95 FAT32 (LBA)"
-msgstr "隱藏 W95 FAT32 (LBA)"
+#: disk-utils/sfdisk.c:1941
+#, fuzzy
+msgid " <dev> device (usually disk) path\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: fdisk/i386_sys_types.c:30
-msgid "Hidden W95 FAT16 (LBA)"
-msgstr "隱藏 W95 FAT16 (LBA)"
+#: disk-utils/sfdisk.c:1942
+#, fuzzy
+msgid " <part> partition number\n"
+msgstr " -N# ： 只變更編號為 # 的分割區"
-#: fdisk/i386_sys_types.c:31
-msgid "NEC DOS"
-msgstr "NEC DOS"
+#: disk-utils/sfdisk.c:1943
+msgid " <type> partition type, GUID for GPT, hex for MBR\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:32
+#: disk-utils/sfdisk.c:1946
#, fuzzy
-msgid "Hidden NTFS WinRE"
-msgstr "隱藏 HPFS/NTFS"
+msgid " -a, --append append partitions to existing partition table\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisk/i386_sys_types.c:33
-msgid "Plan 9"
-msgstr "Plan 9"
+#: disk-utils/sfdisk.c:1947
+#, fuzzy
+msgid " -b, --backup backup partition table sectors (see -O)\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/i386_sys_types.c:34
-msgid "PartitionMagic recovery"
-msgstr "PartitionMagic 復原"
+#: disk-utils/sfdisk.c:1948
+#, fuzzy
+msgid " --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: fdisk/i386_sys_types.c:35
-msgid "Venix 80286"
-msgstr "Venix 80286"
+#: disk-utils/sfdisk.c:1949
+msgid " --move-data[=<typescript>] move partition data after relocation (requires -N)\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:36
-msgid "PPC PReP Boot"
-msgstr "PPC PReP 開機"
+#: disk-utils/sfdisk.c:1950
+msgid " --move-use-fsync use fsync after each write when move data\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:37
-msgid "SFS"
-msgstr "SFS"
+#: disk-utils/sfdisk.c:1951
+#, fuzzy
+msgid " -f, --force disable all consistency checking\n"
+msgstr "您可以停用所有的一致性檢查藉由："
-#: fdisk/i386_sys_types.c:38
-msgid "QNX4.x"
-msgstr "QNX4.x"
+#: disk-utils/sfdisk.c:1953
+#, fuzzy, c-format
+msgid " --color[=<when>] colorize output (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: fdisk/i386_sys_types.c:39
-msgid "QNX4.x 2nd part"
-msgstr "QNX4.x 第二部分"
+#: disk-utils/sfdisk.c:1956
+#, fuzzy
+msgid " -N, --partno <num> specify partition number\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisk/i386_sys_types.c:40
-msgid "QNX4.x 3rd part"
-msgstr "QNX4.x 第三部分"
+#: disk-utils/sfdisk.c:1957
+#, fuzzy
+msgid " -n, --no-act do everything except write to device\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisk/i386_sys_types.c:41
-msgid "OnTrack DM"
-msgstr "OnTrack DM"
+#: disk-utils/sfdisk.c:1958
+#, fuzzy
+msgid " --no-reread do not check whether the device is in use\n"
+msgstr " -c 清空螢幕之前顯示\n"
-#: fdisk/i386_sys_types.c:42
-msgid "OnTrack DM6 Aux1"
-msgstr "OnTrack DM6 Aux1"
+#: disk-utils/sfdisk.c:1959
+#, fuzzy
+msgid " --no-tell-kernel do not tell kernel about changes\n"
+msgstr " -f 不分割長列\n"
-#: fdisk/i386_sys_types.c:43
-msgid "CP/M"
-msgstr "CP/M"
+#: disk-utils/sfdisk.c:1960
+msgid " -O, --backup-file <path> override default backup file name\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:44
-msgid "OnTrack DM6 Aux3"
-msgstr "OnTrack DM6 Aux3"
+#: disk-utils/sfdisk.c:1961
+#, fuzzy
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: fdisk/i386_sys_types.c:45
-msgid "OnTrackDM6"
-msgstr "OnTrackDM6"
+#: disk-utils/sfdisk.c:1962
+#, fuzzy
+msgid " -q, --quiet suppress extra info messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: fdisk/i386_sys_types.c:46
-msgid "EZ-Drive"
-msgstr "EZ-Drive"
+#: disk-utils/sfdisk.c:1964
+#, fuzzy, c-format
+msgid " -w, --wipe <mode> wipe signatures (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: fdisk/i386_sys_types.c:47
-msgid "Golden Bow"
-msgstr "Golden Bow"
+#: disk-utils/sfdisk.c:1967
+#, fuzzy
+msgid " -X, --label <name> specify label type (dos, gpt, ...)\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisk/i386_sys_types.c:48
-msgid "Priam Edisk"
-msgstr "Priam Edisk"
+#: disk-utils/sfdisk.c:1968
+msgid " -Y, --label-nested <name> specify nested label type (dos, bsd)\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:49 fdisk/i386_sys_types.c:93
-#: fdisk/i386_sys_types.c:99 fdisk/i386_sys_types.c:100
-msgid "SpeedStor"
-msgstr "SpeedStor"
+#: disk-utils/sfdisk.c:1970
+msgid " -G, --show-pt-geometry deprecated, alias to --show-geometry\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:50
-msgid "GNU HURD or SysV"
-msgstr "GNU HURD 或 SysV"
+#: disk-utils/sfdisk.c:1971
+#, fuzzy
+msgid " -L, --Linux deprecated, only for backward compatibility\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: fdisk/i386_sys_types.c:51
-msgid "Novell Netware 286"
-msgstr "Novell Netware 286"
+#: disk-utils/sfdisk.c:1972
+#, fuzzy
+msgid " -u, --unit S deprecated, only sector unit is supported\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: fdisk/i386_sys_types.c:52
-msgid "Novell Netware 386"
-msgstr "Novell Netware 386"
+#: disk-utils/sfdisk.c:2093
+#, c-format
+msgid "%s is deprecated in favour of --part-type"
+msgstr ""
-#: fdisk/i386_sys_types.c:53
-msgid "DiskSecure Multi-Boot"
-msgstr "DiskSecure 多種開機"
+#: disk-utils/sfdisk.c:2098
+msgid "--id is deprecated in favour of --part-type"
+msgstr ""
-#: fdisk/i386_sys_types.c:54
-msgid "PC/IX"
-msgstr "PC/IX"
+#: disk-utils/sfdisk.c:2114
+msgid "--show-pt-geometry is no more implemented. Using --show-geometry."
+msgstr ""
-#: fdisk/i386_sys_types.c:55
-msgid "Old Minix"
-msgstr "舊版 Minix"
+#: disk-utils/sfdisk.c:2126
+msgid "--Linux option is unnecessary and deprecated"
+msgstr ""
-#: fdisk/i386_sys_types.c:56
-msgid "Minix / old Linux"
-msgstr "Minix / 舊版 Linux"
+#: disk-utils/sfdisk.c:2155
+#, fuzzy, c-format
+msgid "unsupported unit '%c'"
+msgstr "不受支援的引數：%s"
-#: fdisk/i386_sys_types.c:57
-msgid "Linux swap / Solaris"
-msgstr "Linux 交換區/ Solaris"
+#: disk-utils/sfdisk.c:2236
+msgid "--movedata requires -N"
+msgstr ""
-#: fdisk/i386_sys_types.c:58
-msgid "Linux"
-msgstr "Linux"
+#: disk-utils/swaplabel.c:74
+#, c-format
+msgid "failed to parse UUID: %s"
+msgstr "剖析 UUID 時失敗：%s"
-#: fdisk/i386_sys_types.c:59
-msgid "OS/2 hidden C: drive"
-msgstr "OS/2 隱藏 C: 磁碟"
+#: disk-utils/swaplabel.c:78
+#, c-format
+msgid "%s: failed to seek to swap UUID"
+msgstr "%s：無法尋指到交換 UUID"
-#: fdisk/i386_sys_types.c:60
-msgid "Linux extended"
-msgstr "Linux 擴展"
+#: disk-utils/swaplabel.c:82
+#, c-format
+msgid "%s: failed to write UUID"
+msgstr "%s：無法寫入 UUID"
-#: fdisk/i386_sys_types.c:61 fdisk/i386_sys_types.c:62
-msgid "NTFS volume set"
-msgstr "NTFS 卷冊集"
+#: disk-utils/swaplabel.c:93
+#, c-format
+msgid "%s: failed to seek to swap label "
+msgstr "%s：無法尋指到交換標籤 "
-#: fdisk/i386_sys_types.c:63
-msgid "Linux plaintext"
-msgstr "Linux 純文字"
+#: disk-utils/swaplabel.c:100
+#, c-format
+msgid "label is too long. Truncating it to '%s'"
+msgstr "標籤太長。將它截斷為「%s」"
-#: fdisk/i386_sys_types.c:65
-msgid "Amoeba"
-msgstr "Amoeba"
+#: disk-utils/swaplabel.c:103
+#, c-format
+msgid "%s: failed to write label"
+msgstr "%s：無法寫入標籤"
-#: fdisk/i386_sys_types.c:66
-msgid "Amoeba BBT"
-msgstr "Amoeba BBT"
+#: disk-utils/swaplabel.c:127
+msgid "Display or change the label or UUID of a swap area.\n"
+msgstr ""
-#: fdisk/i386_sys_types.c:67
-msgid "BSD/OS"
-msgstr "BSD/OS"
+#: disk-utils/swaplabel.c:130
+#, fuzzy
+msgid ""
+" -L, --label <label> specify a new label\n"
+" -U, --uuid <uuid> specify a new uuid\n"
+msgstr ""
+" -L, --label <label> 指定新的標貼\n"
+" -U, --uuid<uuid> 指定新的 uuid\n"
-#: fdisk/i386_sys_types.c:68
-msgid "IBM Thinkpad hibernation"
-msgstr "IBM Thinkpad hibernation"
+#: disk-utils/swaplabel.c:171
+msgid "ignore -U (UUIDs are unsupported)"
+msgstr "忽略 -U (UUIDs 不受支援)"
-#: fdisk/i386_sys_types.c:69
-msgid "FreeBSD"
-msgstr "FreeBSD"
+#: include/c.h:243
+#, fuzzy, c-format
+msgid "Try '%s --help' for more information.\n"
+msgstr "嘗試『%s --help』以獲得更多資訊。\n"
-#: fdisk/i386_sys_types.c:70
-msgid "OpenBSD"
-msgstr "OpenBSD"
-
-#: fdisk/i386_sys_types.c:71
-msgid "NeXTSTEP"
-msgstr "NeXTSTEP"
-
-#: fdisk/i386_sys_types.c:72
-msgid "Darwin UFS"
-msgstr "Darwin UFS"
-
-#: fdisk/i386_sys_types.c:73
-msgid "NetBSD"
-msgstr "NetBSD"
-
-#: fdisk/i386_sys_types.c:74
-msgid "Darwin boot"
-msgstr "Darwin 開機"
-
-#: fdisk/i386_sys_types.c:75
-msgid "HFS / HFS+"
-msgstr "HFS / HFS+"
-
-#: fdisk/i386_sys_types.c:76
-msgid "BSDI fs"
-msgstr "BSDI fs"
-
-#: fdisk/i386_sys_types.c:77
-msgid "BSDI swap"
-msgstr "BSDI 交換區"
-
-#: fdisk/i386_sys_types.c:78
-msgid "Boot Wizard hidden"
-msgstr "開機精靈隱藏"
-
-#: fdisk/i386_sys_types.c:79
-msgid "Solaris boot"
-msgstr "Solaris 開機"
-
-#: fdisk/i386_sys_types.c:80
-msgid "Solaris"
-msgstr "Solaris"
-
-#: fdisk/i386_sys_types.c:81
-msgid "DRDOS/sec (FAT-12)"
-msgstr "DRDOS/sec (FAT-12)"
-
-#: fdisk/i386_sys_types.c:82
-msgid "DRDOS/sec (FAT-16 < 32M)"
-msgstr "DRDOS/sec (FAT-16 < 32M)"
-
-#: fdisk/i386_sys_types.c:83
-msgid "DRDOS/sec (FAT-16)"
-msgstr "DRDOS/sec (FAT-16)"
-
-#: fdisk/i386_sys_types.c:84
-msgid "Syrinx"
-msgstr "Syrinx"
-
-#: fdisk/i386_sys_types.c:85
-msgid "Non-FS data"
-msgstr "Non-FS 資料"
-
-#: fdisk/i386_sys_types.c:86
-msgid "CP/M / CTOS / ..."
-msgstr "CP/M / CTOS /…"
-
-#: fdisk/i386_sys_types.c:88
-msgid "Dell Utility"
-msgstr "Dell 公用程式"
-
-#: fdisk/i386_sys_types.c:89
-msgid "BootIt"
-msgstr "BootIt"
-
-#: fdisk/i386_sys_types.c:90
-msgid "DOS access"
-msgstr "DOS 存取"
-
-#: fdisk/i386_sys_types.c:92
-msgid "DOS R/O"
-msgstr "DOS R/O"
-
-#: fdisk/i386_sys_types.c:95
-msgid "BeOS fs"
-msgstr "BeOS fs"
-
-#: fdisk/i386_sys_types.c:96
-msgid "GPT"
-msgstr "GPT"
-
-#: fdisk/i386_sys_types.c:97
-msgid "EFI (FAT-12/16/32)"
-msgstr "EFI (FAT-12/16/32)"
-
-#: fdisk/i386_sys_types.c:98
-msgid "Linux/PA-RISC boot"
-msgstr "Linux/PA-RISC 開機"
-
-#: fdisk/i386_sys_types.c:101
-msgid "DOS secondary"
-msgstr "DOS 次級"
-
-#: fdisk/i386_sys_types.c:102
-msgid "VMware VMFS"
-msgstr "VMware VMFS"
-
-#: fdisk/i386_sys_types.c:103
-msgid "VMware VMKCORE"
-msgstr "VMware VMKCORE"
-
-#: fdisk/i386_sys_types.c:107
-msgid "LANstep"
-msgstr "LANstep"
-
-#: fdisk/i386_sys_types.c:108
-msgid "BBT"
-msgstr "BBT"
-
-#: fdisk/sfdisk.c:129
-#, c-format
-msgid "seek error on %s - cannot seek to %lu\n"
-msgstr "於 %s 搜尋錯誤 - 無法搜尋至 %lu\n"
-
-#: fdisk/sfdisk.c:134
-#, c-format
-msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
-msgstr "搜尋錯誤：想要 0x%08x%08x, 得到 0x%08x%08x\n"
-
-#: fdisk/sfdisk.c:184 fdisk/sfdisk.c:267
-#, c-format
-msgid "read error on %s - cannot read sector %lu\n"
-msgstr "於 %s 讀取錯誤 - 無法讀取磁區 %lu\n"
-
-#: fdisk/sfdisk.c:202
-#, c-format
-msgid "ERROR: sector %lu does not have an msdos signature\n"
-msgstr "錯誤：磁區 %lu 沒有 msdos 簽章\n"
-
-#: fdisk/sfdisk.c:217
-#, c-format
-msgid "write error on %s - cannot write sector %lu\n"
-msgstr "於 %s 寫入錯誤 - 無法寫入磁區 %lu\n"
-
-#: fdisk/sfdisk.c:255
-#, c-format
-msgid "cannot open partition sector save file (%s)\n"
-msgstr "無法開啟分割磁區的儲存檔案 (%s)\n"
-
-#: fdisk/sfdisk.c:273
-#, c-format
-msgid "write error on %s\n"
-msgstr "於 %s 寫入錯誤\n"
-
-#: fdisk/sfdisk.c:299
-#, c-format
-msgid "cannot stat partition restore file (%s)\n"
-msgstr "無法識別分割區的還原檔案狀態 (%s)\n"
-
-#: fdisk/sfdisk.c:304
-msgid "partition restore file has wrong size - not restoring\n"
-msgstr "分割區還原檔案大小有誤 - 無法還原\n"
-
-#: fdisk/sfdisk.c:308
-msgid "out of memory?\n"
-msgstr "記憶體不足？\n"
-
-#: fdisk/sfdisk.c:316
-#, c-format
-msgid "cannot open partition restore file (%s)\n"
-msgstr "無法開啟分割區的還原檔案 (%s)\n"
-
-#: fdisk/sfdisk.c:322
-#, c-format
-msgid "error reading %s\n"
-msgstr "讀取 %s 時發生錯誤\n"
-
-#: fdisk/sfdisk.c:329
-#, c-format
-msgid "cannot open device %s for writing\n"
-msgstr "無法開啟裝置 %s 以供寫入\n"
-
-#: fdisk/sfdisk.c:340
-#, c-format
-msgid "error writing sector %lu on %s\n"
-msgstr "於 %2$s 寫入磁區 %1$lu 時發生錯誤\n"
-
-#: fdisk/sfdisk.c:408
-#, c-format
-msgid "Disk %s: cannot get geometry\n"
-msgstr "磁碟 %s: 無法取得結構參數\n"
-
-#: fdisk/sfdisk.c:425
-#, c-format
-msgid "Disk %s: cannot get size\n"
-msgstr "磁碟 %s: 無法取得大小\n"
-
-#: fdisk/sfdisk.c:457
-#, c-format
-msgid ""
-"Warning: start=%lu - this looks like a partition rather than\n"
-"the entire disk. Using fdisk on it is probably meaningless.\n"
-"[Use the --force option if you really want this]\n"
-msgstr ""
-"警告：開始=%lu - 這看來像是分割區而非\n"
-"整個磁碟。於其上使用 fdisk 可能不具意義的。\n"
-"[如果您確實想要如此，就使用 --force 選項]\n"
-
-#: fdisk/sfdisk.c:465
-#, c-format
-msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
-msgstr "警告：HDIO_GETGEO 表示具有 %lu 個磁頭\n"
-
-#: fdisk/sfdisk.c:468
-#, c-format
-msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
-msgstr "警告：HDIO_GETGEO 表示具有 %lu 段磁區\n"
-
-#: fdisk/sfdisk.c:472
-#, c-format
-msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
-msgstr "警告：BLKGETSIZE/HDIO_GETGEO 表示具有 %lu 圈磁柱\n"
-
-#: fdisk/sfdisk.c:477
-#, c-format
-msgid ""
-"Warning: unlikely number of sectors (%lu) - usually at most 63\n"
-"This will give problems with all software that uses C/H/S addressing.\n"
-msgstr ""
-"警告：不太可能的磁區數量 (%lu) - 通常最多為 63\n"
-"這將對於使用 C/H/S 定址的軟體造成問題。\n"
-
-#: fdisk/sfdisk.c:481
-#, c-format
+#: include/c.h:347
+#, fuzzy
msgid ""
"\n"
-"Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
+"Usage:\n"
msgstr ""
"\n"
-"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-
-#: fdisk/sfdisk.c:567
-#, c-format
-msgid ""
-"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
-msgstr "分割區 %2$s 的 %1$s 有不可能的磁頭數值：%3$lu (應該介於 0-%4$lu)\n"
-
-#: fdisk/sfdisk.c:572
-#, c-format
-msgid ""
-"%s of partition %s has impossible value for sector: %lu (should be in 1-"
-"%lu)\n"
-msgstr "分割區 %1$s 的 %2$s 有不可能的磁區數值：%3$lu (應該介於 1-%4$lu)\n"
-
-#: fdisk/sfdisk.c:577
-#, c-format
-msgid ""
-"%s of partition %s has impossible value for cylinders: %lu (should be in 0-"
-"%lu)\n"
-msgstr "分割區 %1$s 的 %2$s 有不可能的磁柱數值：%3$lu (應該介於 0-%4$lu)\n"
+"用法：\n"
-#: fdisk/sfdisk.c:617
-#, c-format
+#: include/c.h:348
msgid ""
-"Id Name\n"
"\n"
+"Options:\n"
msgstr ""
-"識別號 名稱\n"
"\n"
+"選項：\n"
-#: fdisk/sfdisk.c:776
-#, c-format
-msgid "Re-reading the partition table ...\n"
-msgstr "重新讀取分割表…\n"
-
-#: fdisk/sfdisk.c:781
-msgid ""
-"The command to re-read the partition table failed.\n"
-"Run partprobe(8), kpartx(8) or reboot your system now,\n"
-"before using mkfs\n"
-msgstr ""
-"重新讀取分割表的命令失敗。\n"
-"在使用 mkfs 之前，請執行 partprobe(8),kpartx(8) 或將您的系統重新開機\n"
-
-#: fdisk/sfdisk.c:789
-#, c-format
-msgid "Error closing %s\n"
-msgstr "關閉 %s 時發生錯誤\n"
-
-#: fdisk/sfdisk.c:830
-#, c-format
-msgid "%s: no such partition\n"
-msgstr "%s：無此類分割區\n"
-
-#: fdisk/sfdisk.c:853
-msgid "unrecognized format - using sectors\n"
-msgstr "無法辨識的格式 - 使用磁區數\n"
-
-#: fdisk/sfdisk.c:913
-#, c-format
-msgid "unimplemented format - using %s\n"
-msgstr "尚未實作的格式 - 使用 %s\n"
-
-#: fdisk/sfdisk.c:917
-#, c-format
+#: include/c.h:349
+#, fuzzy
msgid ""
-"Units = cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
+"Functions:\n"
msgstr ""
-"單位 = %lu 位元組的磁柱，1024 位元組的區塊，從 %d 起計數\n"
"\n"
+"函式：\n"
-#: fdisk/sfdisk.c:919
-#, c-format
-msgid " Device Boot Start End #cyls #blocks Id System\n"
-msgstr " 裝置開機起始 結束 磁柱數 區塊數 識別號 系統\n"
-
-#: fdisk/sfdisk.c:924
-#, c-format
+#: include/c.h:350
msgid ""
-"Units = sectors of 512 bytes, counting from %d\n"
"\n"
+"Commands:\n"
msgstr ""
-"單位 = 512 位元組的磁區，從 %d 起計數\n"
-"\n"
-
-#: fdisk/sfdisk.c:926
-#, c-format
-msgid " Device Boot Start End #sectors Id System\n"
-msgstr " 裝置開機 起始 結束 磁區數 識別號 系統\n"
-#: fdisk/sfdisk.c:929
-#, c-format
+#: include/c.h:351
+#, fuzzy
msgid ""
-"Units = blocks of 1024 bytes, counting from %d\n"
"\n"
+"Available output columns:\n"
msgstr ""
-"單位 = 1024 位元組的區塊，從 %d 起計數\n"
"\n"
+"可用欄位：\n"
-#: fdisk/sfdisk.c:931
-#, c-format
-msgid " Device Boot Start End #blocks Id System\n"
-msgstr " 裝置開機 起始 結束 區塊數 識別號 系統\n"
+#: include/c.h:354
+#, fuzzy
+msgid "display this help"
+msgstr " -h 顯示這份說明然後離開\n"
-#: fdisk/sfdisk.c:934
-#, c-format
+#: include/c.h:355
+msgid "display version"
+msgstr ""
+
+#: include/c.h:363
+#, fuzzy, c-format
msgid ""
-"Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
+"For more details see %s.\n"
msgstr ""
-"單位 = 1048576 位元組的 mebibytes，1024 位元組的區塊，從 %d 起計數\n"
"\n"
+"以獲得更多細節參看 %s。\n"
-#: fdisk/sfdisk.c:936
+#: include/c.h:365
#, c-format
-msgid " Device Boot Start End MiB #blocks Id System\n"
-msgstr " 裝置開機起始 結束 MiB 區塊數 識別號 系統\n"
+msgid "%s from %s\n"
+msgstr "%s 來自 %s\n"
-#: fdisk/sfdisk.c:1095
-#, c-format
-msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
-msgstr "\t\t起始：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
+#: include/closestream.h:70 include/closestream.h:72 login-utils/vipw.c:276
+#: login-utils/vipw.c:295 sys-utils/rtcwake.c:302 term-utils/setterm.c:835
+#: text-utils/col.c:160
+#, fuzzy
+msgid "write error"
+msgstr "寫入錯誤"
-#: fdisk/sfdisk.c:1102
-#, c-format
-msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
-msgstr "\t\t結束：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
+#: include/colors.h:27
+#, fuzzy
+msgid "colors are enabled by default"
+msgstr "預設會拒絕從 %2$s 登入到 %1$s。\n"
-#: fdisk/sfdisk.c:1105
-#, c-format
-msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
-msgstr "分割區結束於磁柱 %ld，位於磁碟末端之後\n"
+#: include/colors.h:29
+#, fuzzy
+msgid "colors are disabled by default"
+msgstr "預設會拒絕從 %2$s 登入到 %1$s。\n"
-#: fdisk/sfdisk.c:1115
-msgid "No partitions found\n"
-msgstr "找不到分割區\n"
+#: include/env.h:18 lib/pager.c:153 login-utils/login.c:1029
+#: login-utils/login.c:1033 term-utils/agetty.c:1198
+#, fuzzy, c-format
+msgid "failed to set the %s environment variable"
+msgstr "設定 %s 資源限制時失敗"
-#: fdisk/sfdisk.c:1118
-#, c-format
-msgid ""
-"Warning: The partition table looks like it was made\n"
-" for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
-"For this listing I'll assume that geometry.\n"
+#: include/optutils.h:85
+#, fuzzy, c-format
+msgid "%s: mutually exclusive arguments:"
+msgstr "彼此互斥。"
+
+#: include/pt-gpt-partnames.h:16
+msgid "EFI System"
msgstr ""
-"警告：分割表看起來像是\n"
-"用於 C/H/S=*/%ld/%ld (而非 %ld/%ld/%ld)。\n"
-"我將會假設該結構參數以用於此列表。\n"
-#: fdisk/sfdisk.c:1166
+#: include/pt-gpt-partnames.h:18
#, fuzzy
-msgid "no partition table present."
-msgstr "分割表不存在。\n"
+msgid "MBR partition scheme"
+msgstr "分割名稱"
-#: fdisk/sfdisk.c:1168
-#, fuzzy, c-format
-msgid "strange, only %d partitions defined."
-msgstr "奇怪，只有定義 %d 個分割區。\n"
+#: include/pt-gpt-partnames.h:19
+msgid "Intel Fast Flash"
+msgstr ""
-#: fdisk/sfdisk.c:1177
-#, c-format
-msgid "Warning: partition %s has size 0 but is not marked Empty\n"
-msgstr "警告：分割區 %s 大小為 0 但是並未標記為空\n"
+#: include/pt-gpt-partnames.h:22
+#, fuzzy
+msgid "BIOS boot"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1180
-#, c-format
-msgid "Warning: partition %s has size 0 and is bootable\n"
-msgstr "警告：分割區 %s 大小為 0 且為可開機\n"
+#: include/pt-gpt-partnames.h:25
+#, fuzzy
+msgid "Sony boot partition"
+msgstr "選取可開機的分割"
-#: fdisk/sfdisk.c:1183
-#, c-format
-msgid "Warning: partition %s has size 0 and nonzero start\n"
-msgstr "警告：分割區 %s 大小為 0 且以非零值開始\n"
+#: include/pt-gpt-partnames.h:26
+#, fuzzy
+msgid "Lenovo boot partition"
+msgstr "選取可開機的分割"
-#: fdisk/sfdisk.c:1195
-#, fuzzy, c-format
-msgid "Warning: partition %s is not contained in partition %s\n"
-msgstr "並未包含於分割區 %s 中\n"
+#: include/pt-gpt-partnames.h:29
+#, fuzzy
+msgid "PowerPC PReP boot"
+msgstr "PPC PReP 開機"
-#: fdisk/sfdisk.c:1207
-#, fuzzy, c-format
-msgid "Warning: partitions %s and %s overlap\n"
-msgstr "警告：分割區 %d 是空的\n"
+#: include/pt-gpt-partnames.h:32
+#, fuzzy
+msgid "ONIE boot"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1219
-#, fuzzy, c-format
-msgid ""
-"Warning: partition %s contains part of the partition table (sector %llu),\n"
-"and will destroy it when filled\n"
+#: include/pt-gpt-partnames.h:33
+msgid "ONIE config"
msgstr ""
-"警告：分割區 %s 含有部分的分割表 (磁區 %lu)，\n"
-"當它填滿後將會被損毀\n"
-
-#: fdisk/sfdisk.c:1232
-#, c-format
-msgid "Warning: partition %s starts at sector 0\n"
-msgstr "警告：分割區 %s 開始於磁區 0\n"
-#: fdisk/sfdisk.c:1237
-#, c-format
-msgid "Warning: partition %s extends past end of disk\n"
-msgstr "警告：分割區 %s 延伸超過磁碟末端\n"
-
-#: fdisk/sfdisk.c:1254
-#, c-format
-msgid ""
-"Warning: partition %s has size %d.%d TB (%llu bytes),\n"
-"which is larger than the %llu bytes limit imposed\n"
-"by the DOS partition table for %d-byte sectors\n"
+#: include/pt-gpt-partnames.h:36
+msgid "Microsoft reserved"
msgstr ""
-#: fdisk/sfdisk.c:1270
-#, c-format
-msgid ""
-"Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
-"which exceeds the DOS partition table limit of %llu sectors\n"
+#: include/pt-gpt-partnames.h:37
+msgid "Microsoft basic data"
msgstr ""
-#: fdisk/sfdisk.c:1290
-msgid ""
-"Among the primary partitions, at most one can be extended\n"
-" (although this is not a problem under Linux)\n"
+#: include/pt-gpt-partnames.h:38
+msgid "Microsoft LDM metadata"
msgstr ""
-"在主要分割區之中，最多只能有一個是擴充分割區\n"
-"(雖然這在 Linux 之下並不是個問題)\n"
-
-#: fdisk/sfdisk.c:1310
-#, c-format
-msgid "Warning: partition %s does not start at a cylinder boundary\n"
-msgstr "警告：分割區 %s 並非啟始於磁柱邊界\n"
-#: fdisk/sfdisk.c:1316
-#, c-format
-msgid "Warning: partition %s does not end at a cylinder boundary\n"
-msgstr "警告：分割區 %s 並非結束於磁柱邊界\n"
+#: include/pt-gpt-partnames.h:39
+msgid "Microsoft LDM data"
+msgstr ""
-#: fdisk/sfdisk.c:1335
-msgid ""
-"Warning: more than one primary partition is marked bootable (active)\n"
-"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
+#: include/pt-gpt-partnames.h:40
+msgid "Windows recovery environment"
msgstr ""
-"警告：超過一個的主要分割區被標記為可開機的 (作用中)\n"
-"這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
-#: fdisk/sfdisk.c:1342
-msgid ""
-"Warning: usually one can boot from primary partitions only\n"
-"LILO disregards the `bootable' flag.\n"
+#: include/pt-gpt-partnames.h:41
+msgid "IBM General Parallel Fs"
msgstr ""
-"警告：通常只可以從主要分割區開機\n"
-"LILO 並不理會「可開機的」旗標。\n"
-#: fdisk/sfdisk.c:1348
-msgid ""
-"Warning: no primary partition is marked bootable (active)\n"
-"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
+#: include/pt-gpt-partnames.h:42
+msgid "Microsoft Storage Spaces"
msgstr ""
-"警告：沒有主要分割區被標記為可開機的 (作用中)\n"
-"這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
-#: fdisk/sfdisk.c:1362
-msgid "start"
-msgstr "啟始"
+#: include/pt-gpt-partnames.h:45
+#, fuzzy
+msgid "HP-UX data"
+msgstr "刪除分割"
-#: fdisk/sfdisk.c:1365
-#, c-format
-msgid ""
-"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
-msgstr ""
-"分割區 %s：啟始：(c,h,s) 預期為 (%ld ,%ld ,%ld) 但找到 (%ld ,%ld ,%ld)\n"
+#: include/pt-gpt-partnames.h:46
+#, fuzzy
+msgid "HP-UX service"
+msgstr "已無多餘的分割區"
-#: fdisk/sfdisk.c:1371
-msgid "end"
-msgstr "結束"
+#: include/pt-gpt-partnames.h:49 libfdisk/src/sgi.c:60 libfdisk/src/sun.c:51
+msgid "Linux swap"
+msgstr "Linux swap"
-#: fdisk/sfdisk.c:1374
-#, c-format
-msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
-msgstr "分割區 %s：結束：(c,h,s) 預期為 (%ld ,%ld ,%ld) 找到 (%ld ,%ld ,%ld)\n"
+#: include/pt-gpt-partnames.h:50
+#, fuzzy
+msgid "Linux filesystem"
+msgstr "檔案系統型態"
-#: fdisk/sfdisk.c:1377
-#, c-format
-msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
-msgstr "分割區 %s 結束於磁柱 %ld，位於磁碟的末端之後\n"
+#: include/pt-gpt-partnames.h:51
+#, fuzzy
+msgid "Linux server data"
+msgstr "SunOS 保留區"
-#: fdisk/sfdisk.c:1402
-#, fuzzy, c-format
-msgid ""
-"Warning: shifted start of the extd partition from %lld to %lld\n"
-"(For listing purposes only. Do not change its contents.)\n"
+#: include/pt-gpt-partnames.h:52
+msgid "Linux root (x86)"
msgstr ""
-"警告：擴充分割區的啟始從 %ld 位移到 %ld\n"
-"(只用於列表目的。請不要變更它的內容。)\n"
-#: fdisk/sfdisk.c:1407
-msgid ""
-"Warning: extended partition does not start at a cylinder boundary.\n"
-"DOS and Linux will interpret the contents differently.\n"
+#: include/pt-gpt-partnames.h:53
+msgid "Linux root (ARM)"
msgstr ""
-"警告：擴充分割區非啟始於磁柱邊界。\n"
-"DOS 和 Linux 將對內容有不同解譯。\n"
-#: fdisk/sfdisk.c:1425 fdisk/sfdisk.c:1502
-#, fuzzy, c-format
-msgid "too many partitions - ignoring those past nr (%ld)\n"
-msgstr "太多分割區 - 忽略那些過去的 nr (%d)\n"
+#: include/pt-gpt-partnames.h:54
+msgid "Linux root (x86-64)"
+msgstr ""
-#: fdisk/sfdisk.c:1440
-msgid "tree of partitions?\n"
-msgstr "分割區的樹狀圖？\n"
+#: include/pt-gpt-partnames.h:55
+msgid "Linux root (ARM-64)"
+msgstr ""
-#: fdisk/sfdisk.c:1548
-msgid "detected Disk Manager - unable to handle that\n"
-msgstr "偵測到磁碟管理員 - 無法處理它\n"
+#: include/pt-gpt-partnames.h:56
+msgid "Linux root\t(IA-64)"
+msgstr ""
-#: fdisk/sfdisk.c:1556
-msgid "DM6 signature found - giving up\n"
-msgstr "找到 DM6 簽章 - 放棄\n"
+#: include/pt-gpt-partnames.h:57
+#, fuzzy
+msgid "Linux reserved"
+msgstr "SunOS 保留區"
-#: fdisk/sfdisk.c:1575
-msgid "strange..., an extended partition of size 0?\n"
-msgstr "很奇怪…，大小為 0 的擴充分割區？\n"
+#: include/pt-gpt-partnames.h:58
+#, fuzzy
+msgid "Linux home"
+msgstr "Linux"
-#: fdisk/sfdisk.c:1582 fdisk/sfdisk.c:1593
-msgid "strange..., a BSD partition of size 0?\n"
-msgstr "很奇怪…，大小為 0 的 BSD 分割區？\n"
+#: include/pt-gpt-partnames.h:59 libfdisk/src/sgi.c:63
+msgid "Linux RAID"
+msgstr "Linux RAID"
-#: fdisk/sfdisk.c:1636
-#, c-format
-msgid " %s: unrecognized partition table type\n"
-msgstr " %s: 無法辨識的分割表類型\n"
+#: include/pt-gpt-partnames.h:60 include/pt-mbr-partnames.h:61
+#: libfdisk/src/sgi.c:62 libfdisk/src/sun.c:53
+msgid "Linux LVM"
+msgstr "Linux LVM"
-#: fdisk/sfdisk.c:1648
-msgid "-n flag was given: Nothing changed\n"
-msgstr "-n 旗標已給定：沒有改變任何東西\n"
+#: include/pt-gpt-partnames.h:66 include/pt-mbr-partnames.h:95
+#, fuzzy
+msgid "Linux extended boot"
+msgstr "Linux 擴展"
-#: fdisk/sfdisk.c:1665
-msgid "Failed saving the old sectors - aborting\n"
-msgstr "儲存舊的磁區時失敗 - 放棄\n"
+#: include/pt-gpt-partnames.h:69
+#, fuzzy
+msgid "FreeBSD data"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1670 fdisk/sfdisk.c:1675
-#, c-format
-msgid "Failed writing the partition on %s\n"
-msgstr "寫入分割區於 %s 時失敗\n"
+#: include/pt-gpt-partnames.h:70
+#, fuzzy
+msgid "FreeBSD boot"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1753
+#: include/pt-gpt-partnames.h:71
#, fuzzy
-msgid "long or incomplete input line - quitting"
-msgstr "太長或不完整的輸入列 - 離開\n"
+msgid "FreeBSD swap"
+msgstr "BSDI 交換區"
-#: fdisk/sfdisk.c:1789
-#, fuzzy, c-format
-msgid "input error: `=' expected after %s field"
-msgstr "輸入錯誤：預期「=」位於 %s 欄位之後\n"
+#: include/pt-gpt-partnames.h:72
+#, fuzzy
+msgid "FreeBSD UFS"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1796
-#, fuzzy, c-format
-msgid "input error: unexpected character %c after %s field"
-msgstr "輸入錯誤：未預期的字元 %c 位於 %s 欄位之後\n"
+#: include/pt-gpt-partnames.h:73
+#, fuzzy
+msgid "FreeBSD ZFS"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1802
-#, fuzzy, c-format
-msgid "unrecognized input: %s"
-msgstr "無法辨識的輸入：%s\n"
+#: include/pt-gpt-partnames.h:74
+#, fuzzy
+msgid "FreeBSD Vinum"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:1843 fdisk/sfdisk.c:1880
-msgid "number too big\n"
-msgstr "數字太大\n"
+#: include/pt-gpt-partnames.h:77
+#, fuzzy
+msgid "Apple HFS/HFS+"
+msgstr "HFS / HFS+"
-#: fdisk/sfdisk.c:1847 fdisk/sfdisk.c:1884
-msgid "trailing junk after number\n"
-msgstr "數字之後尾隨無用物\n"
+#: include/pt-gpt-partnames.h:78
+#, fuzzy
+msgid "Apple APFS"
+msgstr "HFS / HFS+"
-#: fdisk/sfdisk.c:2009
-msgid "no room for partition descriptor\n"
-msgstr "沒有空間可用於分割區描述\n"
+#: include/pt-gpt-partnames.h:79
+msgid "Apple UFS"
+msgstr ""
-#: fdisk/sfdisk.c:2042
-msgid "cannot build surrounding extended partition\n"
-msgstr "無法圍繞擴充分割區建立\n"
+#: include/pt-gpt-partnames.h:80
+msgid "Apple RAID"
+msgstr ""
-#: fdisk/sfdisk.c:2093
-msgid "too many input fields\n"
-msgstr "太多輸入欄位\n"
+#: include/pt-gpt-partnames.h:81
+msgid "Apple RAID offline"
+msgstr ""
-#: fdisk/sfdisk.c:2127
-msgid "No room for more\n"
-msgstr "沒有空間可容納更多\n"
+#: include/pt-gpt-partnames.h:82
+msgid "Apple boot"
+msgstr ""
-#: fdisk/sfdisk.c:2146
-msgid "Illegal type\n"
-msgstr "不合法的類型\n"
+#: include/pt-gpt-partnames.h:83
+msgid "Apple label"
+msgstr ""
-#: fdisk/sfdisk.c:2180
-#, c-format
-msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
-msgstr "警告：給定的大小 (%lu) 超出所允許的最大值 (%lu)\n"
+#: include/pt-gpt-partnames.h:84
+msgid "Apple TV recovery"
+msgstr ""
-#: fdisk/sfdisk.c:2186
-msgid "Warning: empty partition\n"
-msgstr "警告：空的分割區\n"
+#: include/pt-gpt-partnames.h:85
+msgid "Apple Core storage"
+msgstr ""
-#: fdisk/sfdisk.c:2200
-#, c-format
-msgid "Warning: bad partition start (earliest %lu)\n"
-msgstr "警告：不當的分割區啟始 (最先 %lu)\n"
+#: include/pt-gpt-partnames.h:88 include/pt-mbr-partnames.h:77
+msgid "Solaris boot"
+msgstr "Solaris 開機"
-#: fdisk/sfdisk.c:2213
-msgid "unrecognized bootable flag - choose - or *\n"
-msgstr "無法辨識的可開機旗標 - 選擇 - 或 *\n"
+#: include/pt-gpt-partnames.h:89
+#, fuzzy
+msgid "Solaris root"
+msgstr "Solaris 開機"
-#: fdisk/sfdisk.c:2230 fdisk/sfdisk.c:2244
-msgid "partial c,h,s specification?\n"
-msgstr "部份 c,h,s 規格？\n"
+#: include/pt-gpt-partnames.h:91
+msgid "Solaris /usr & Apple ZFS"
+msgstr ""
-#: fdisk/sfdisk.c:2255
-msgid "Extended partition not where expected\n"
-msgstr "擴充分割區不在預期的位置\n"
+#: include/pt-gpt-partnames.h:92
+#, fuzzy
+msgid "Solaris swap"
+msgstr "Solaris"
-#: fdisk/sfdisk.c:2287
+#: include/pt-gpt-partnames.h:93
#, fuzzy
-msgid "bad input"
-msgstr "不當的輸入\n"
+msgid "Solaris backup"
+msgstr "Solaris 開機"
-#: fdisk/sfdisk.c:2310
-msgid "too many partitions\n"
-msgstr "太多分割區\n"
+#: include/pt-gpt-partnames.h:94
+#, fuzzy
+msgid "Solaris /var"
+msgstr "Solaris"
-#: fdisk/sfdisk.c:2343
-msgid ""
-"Input in the following format; absent fields get a default value.\n"
-"<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
-"Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
-msgstr ""
-"以下列的格式輸入；缺值欄位將取得預設值。\n"
-"<啟始> <大小> <類型 [E,S,L,X, 十六進位]> <可開機 [-,*]> <c,h,s> <c,h,s>\n"
-"常常您只有需要指定 <啟始> 和 <大小> (也許還有 <類型>)。\n"
-
-#: fdisk/sfdisk.c:2363 getopt/getopt.c:314 hwclock/hwclock.c:1373
-#: misc-utils/cal.c:782 misc-utils/logger.c:138 misc-utils/look.c:366
-#: misc-utils/mcookie.c:66 misc-utils/namei.c:411 misc-utils/rename.c:64
-#: misc-utils/uuidd.c:54 misc-utils/uuidgen.c:33 misc-utils/whereis.c:138
-#: misc-utils/wipefs.c:332 sys-utils/dmesg.c:145 sys-utils/fallocate.c:59
-#: sys-utils/fsfreeze.c:40 sys-utils/fstrim.c:55 sys-utils/mountpoint.c:111
-#: sys-utils/renice.c:54 sys-utils/swapon.c:114 sys-utils/swapon.c:135
-#: term-utils/mesg.c:68 term-utils/script.c:129 term-utils/scriptreplay.c:39
-#: term-utils/setterm.c:675 term-utils/wall.c:87 term-utils/write.c:78
+#: include/pt-gpt-partnames.h:95
#, fuzzy
-msgid ""
-"\n"
-"Usage:\n"
-msgstr "用法:\n"
+msgid "Solaris /home"
+msgstr "Solaris 開機"
-#: fdisk/sfdisk.c:2365
-#, fuzzy, c-format
-msgid " %s [options] <device> [...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: include/pt-gpt-partnames.h:96
+#, fuzzy
+msgid "Solaris alternate sector"
+msgstr "太多交替速度"
-#: fdisk/sfdisk.c:2367 getopt/getopt.c:322 hwclock/hwclock.c:1393
-#: misc-utils/cal.c:787 misc-utils/logger.c:142 misc-utils/look.c:370
-#: misc-utils/mcookie.c:70 misc-utils/namei.c:415 misc-utils/rename.c:69
-#: misc-utils/uuidd.c:58 misc-utils/uuidgen.c:37 misc-utils/whereis.c:142
-#: misc-utils/wipefs.c:336 sys-utils/dmesg.c:149 sys-utils/fallocate.c:63
-#: sys-utils/fsfreeze.c:44 sys-utils/fstrim.c:59 sys-utils/mountpoint.c:116
-#: sys-utils/renice.c:61 sys-utils/swapon.c:117 sys-utils/swapon.c:138
-#: term-utils/mesg.c:72 term-utils/script.c:133 term-utils/scriptreplay.c:44
-#: term-utils/setterm.c:679 term-utils/wall.c:91 term-utils/write.c:83
-#: text-utils/column.c:91
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-msgstr ""
-"\n"
-"選項：\n"
+#: include/pt-gpt-partnames.h:97
+#, fuzzy
+msgid "Solaris reserved 1"
+msgstr "SunOS 保留區"
-#: fdisk/sfdisk.c:2368
-msgid ""
-" -s, --show-size list size of a partition\n"
-" -c, --id change or print partition Id\n"
-" --change-id change Id\n"
-" --print-id print Id\n"
-msgstr ""
+#: include/pt-gpt-partnames.h:98
+#, fuzzy
+msgid "Solaris reserved 2"
+msgstr "SunOS 保留區"
-#: fdisk/sfdisk.c:2372
-msgid ""
-" -l, --list list partitions of each device\n"
-" -d, --dump idem, but in a format suitable for later input\n"
-" -i, --increment number cylinders etc. from 1 instead of from 0\n"
-" -u, --unit <letter> units to be used; <letter> can be one of\n"
-" S (sectors), C (cylinders), B (blocks), or M "
-"(MB)\n"
+#: include/pt-gpt-partnames.h:99
+#, fuzzy
+msgid "Solaris reserved 3"
+msgstr "SunOS 保留區"
+
+#: include/pt-gpt-partnames.h:100
+#, fuzzy
+msgid "Solaris reserved 4"
+msgstr "SunOS 保留區"
+
+#: include/pt-gpt-partnames.h:101
+#, fuzzy
+msgid "Solaris reserved 5"
+msgstr "SunOS 保留區"
+
+#: include/pt-gpt-partnames.h:104
+#, fuzzy
+msgid "NetBSD swap"
+msgstr "BSDI 交換區"
+
+#: include/pt-gpt-partnames.h:105
+#, fuzzy
+msgid "NetBSD FFS"
+msgstr "NetBSD"
+
+#: include/pt-gpt-partnames.h:106
+#, fuzzy
+msgid "NetBSD LFS"
+msgstr "NetBSD"
+
+#: include/pt-gpt-partnames.h:107
+msgid "NetBSD concatenated"
msgstr ""
-#: fdisk/sfdisk.c:2377
-msgid ""
-" -1, --one-only reserved option that does nothing currently\n"
-" -T, --list-types list the known partition types\n"
-" -D, --DOS for DOS-compatibility: waste a little space\n"
-" -E, --DOS-extended DOS extended partition compatibility\n"
-" -R, --re-read make the kernel reread the partition table\n"
+#: include/pt-gpt-partnames.h:108
+msgid "NetBSD encrypted"
msgstr ""
-#: fdisk/sfdisk.c:2382
-msgid ""
-" -N <number> change only the partition with this <number>\n"
-" -n do not actually write to disk\n"
-" -O <file> save the sectors that will be overwritten to "
-"<file>\n"
-" -I <file> restore sectors from <file>\n"
+#: include/pt-gpt-partnames.h:109
+#, fuzzy
+msgid "NetBSD RAID"
+msgstr "NetBSD"
+
+#: include/pt-gpt-partnames.h:112
+msgid "ChromeOS kernel"
msgstr ""
-#: fdisk/sfdisk.c:2386
-msgid ""
-" -V, --verify check that the listed partitions are reasonable\n"
-" -v, --version display version information and exit\n"
-" -h, --help display this help text and exit\n"
+#: include/pt-gpt-partnames.h:113
+msgid "ChromeOS root fs"
msgstr ""
-#: fdisk/sfdisk.c:2390
+#: include/pt-gpt-partnames.h:114
#, fuzzy
-msgid ""
-"\n"
-"Dangerous options:\n"
-msgstr "危險選項："
+msgid "ChromeOS reserved"
+msgstr "SunOS 保留區"
-#: fdisk/sfdisk.c:2391
-msgid ""
-" -f, --force disable all consistency checking\n"
-" --no-reread do not check whether the partition is in use\n"
-" -q, --quiet suppress warning messages\n"
-" -L, --Linux do not complain about things irrelevant for "
-"Linux\n"
+#: include/pt-gpt-partnames.h:117
+msgid "MidnightBSD data"
msgstr ""
-#: fdisk/sfdisk.c:2395
-#, fuzzy
-msgid ""
-" -g, --show-geometry print the kernel's idea of the geometry\n"
-" -G, --show-pt-geometry print geometry guessed from the partition table\n"
-msgstr " -G [或 --show-pt-geometry]：印出根據分割表所猜測的硬碟結構參數"
+#: include/pt-gpt-partnames.h:118
+msgid "MidnightBSD boot"
+msgstr ""
-#: fdisk/sfdisk.c:2397
+#: include/pt-gpt-partnames.h:119
#, fuzzy
-msgid ""
-" -A, --activate[=<device>] activate bootable flag\n"
-" -U, --unhide[=<dev>] set partition unhidden\n"
-" -x, --show-extended also list extended partitions in the output,\n"
-" or expect descriptors for them in the input\n"
-msgstr ""
-" -x [或 --show-extended]：於輸出時也列出擴充分割區\n"
-" 或預期輸入時有對於它們的描述"
+msgid "MidnightBSD swap"
+msgstr "BSDI 交換區"
-#: fdisk/sfdisk.c:2401
-msgid ""
-" --leave-last do not allocate the last cylinder\n"
-" --IBM same as --leave-last\n"
+#: include/pt-gpt-partnames.h:120
+msgid "MidnightBSD UFS"
msgstr ""
-#: fdisk/sfdisk.c:2403
-msgid ""
-" --in-order partitions are in order\n"
-" --not-in-order partitions are not in order\n"
-" --inside-outer all logicals inside outermost extended\n"
-" --not-inside-outer not all logicals inside outermost extended\n"
+#: include/pt-gpt-partnames.h:121
+msgid "MidnightBSD ZFS"
msgstr ""
-#: fdisk/sfdisk.c:2407
-msgid ""
-" --nested every partition is disjoint from all others\n"
-" --chained like nested, but extended partitions may lie "
-"outside\n"
-" --onesector partitions are mutually disjoint\n"
+#: include/pt-gpt-partnames.h:122
+msgid "MidnightBSD Vinum"
msgstr ""
-#: fdisk/sfdisk.c:2411
-msgid ""
-"\n"
-"Override the detected geometry using:\n"
-" -C, --cylinders <number> set the number of cylinders to use\n"
-" -H, --heads <number> set the number of heads to use\n"
-" -S, --sectors <number> set the number of sectors to use\n"
-"\n"
+#: include/pt-gpt-partnames.h:125
+msgid "Ceph Journal"
msgstr ""
-#: fdisk/sfdisk.c:2421
-msgid "Usage:"
-msgstr "用法："
+#: include/pt-gpt-partnames.h:126
+msgid "Ceph Encrypted Journal"
+msgstr ""
-#: fdisk/sfdisk.c:2422
-#, c-format
-msgid "%s device\t\t list active partitions on device\n"
-msgstr "%s 裝置\t\t 列出裝置上的作用中分割區\n"
+#: include/pt-gpt-partnames.h:127
+msgid "Ceph OSD"
+msgstr ""
-#: fdisk/sfdisk.c:2423
-#, c-format
-msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
-msgstr "%s 裝置 n1 n2…啟用分割區 n1..., 停用其餘的\n"
+#: include/pt-gpt-partnames.h:128
+msgid "Ceph crypt OSD"
+msgstr ""
-#: fdisk/sfdisk.c:2425
-#, c-format
-msgid "%s -An device\t activate partition n, inactivate the other ones\n"
-msgstr "%s -An 裝置\t 啟用分割區 n, 停用另外一個\n"
+#: include/pt-gpt-partnames.h:129
+msgid "Ceph disk in creation"
+msgstr ""
-#: fdisk/sfdisk.c:2534
-#, c-format
-msgid ""
-"\n"
-"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk "
-"doesn't support GPT. Use GNU Parted.\n"
-"\n"
+#: include/pt-gpt-partnames.h:130
+msgid "Ceph crypt disk in creation"
msgstr ""
-"\n"
-"警告：GPT (GUID 分割表) 於「%s」偵測到！工具程式 sfdisk 不支援 GPT。使用 GNU "
-"Parted。\n"
-"\n"
-#: fdisk/sfdisk.c:2539
-#, c-format
-msgid "Use the --force flag to overrule this check.\n"
-msgstr "使用 --force 旗標以駁回這個檢查。\n"
+#: include/pt-gpt-partnames.h:133 include/pt-mbr-partnames.h:104
+msgid "VMware VMFS"
+msgstr "VMware VMFS"
-#: fdisk/sfdisk.c:2578
+#: include/pt-gpt-partnames.h:134
#, fuzzy
-msgid "no command?"
-msgstr "沒有命令？\n"
-
-#: fdisk/sfdisk.c:2748
-#, c-format
-msgid "total: %llu blocks\n"
-msgstr "總計：%llu 區塊\n"
+msgid "VMware Diagnostic"
+msgstr "Compaq 診斷"
-#: fdisk/sfdisk.c:2791
+#: include/pt-gpt-partnames.h:135
#, fuzzy
-msgid "usage: sfdisk --print-id device partition-number"
-msgstr "用法：sfdisk --print-id 裝置 分割區編號\n"
+msgid "VMware Virtual SAN"
+msgstr "VMware VMFS"
-#: fdisk/sfdisk.c:2793
+#: include/pt-gpt-partnames.h:136
#, fuzzy
-msgid "usage: sfdisk --change-id device partition-number Id"
-msgstr "用法：sfdisk --change-id 裝置 分割區編號 識別號\n"
+msgid "VMware Virsto"
+msgstr "VMware VMFS"
-#: fdisk/sfdisk.c:2795
+#: include/pt-gpt-partnames.h:137
#, fuzzy
-msgid "usage: sfdisk --id device partition-number [Id]"
-msgstr "用法：sfdisk --id 裝置 分割區編號 [識別號]\n"
+msgid "VMware Reserved"
+msgstr "SunOS 保留區"
-#: fdisk/sfdisk.c:2802
+#: include/pt-gpt-partnames.h:140
#, fuzzy
-msgid "can specify only one device (except with -l or -s)"
-msgstr "只可以指定一個裝置 (除了配合 -l 或 -s)\n"
-
-#: fdisk/sfdisk.c:2828
-#, fuzzy, c-format
-msgid "cannot open %s read-write"
-msgstr "無法開啟 %s 的可讀可寫\n"
-
-#: fdisk/sfdisk.c:2830
-#, fuzzy, c-format
-msgid "cannot open %s for reading"
-msgstr "無法開啟 %s 用於讀取\n"
-
-#: fdisk/sfdisk.c:2874 fdisk/sfdisk.c:2906
-#, c-format
-msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
-msgstr "%s：%ld 磁柱，%ld 磁頭，%ld 磁區/磁軌\n"
+msgid "OpenBSD data"
+msgstr "FreeBSD"
-#: fdisk/sfdisk.c:2925
-#, fuzzy, c-format
-msgid "Cannot get size of %s"
-msgstr "無法取得 %s 的大小\n"
+#: include/pt-gpt-partnames.h:143
+#, fuzzy
+msgid "QNX6 file system"
+msgstr "檔案系統型態"
-#: fdisk/sfdisk.c:3006
-#, c-format
-msgid "bad active byte: 0x%x instead of 0x80\n"
-msgstr "不當的作用中位元組：0x%x 而非 0x80\n"
+#: include/pt-gpt-partnames.h:146
+#, fuzzy
+msgid "Plan 9 partition"
+msgstr "刪除分割"
-#: fdisk/sfdisk.c:3025 fdisk/sfdisk.c:3082 fdisk/sfdisk.c:3115
-msgid ""
-"Done\n"
-"\n"
+#: include/pt-gpt-partnames.h:149
+msgid "HiFive Unleashed FSBL"
msgstr ""
-"完成\n"
-"\n"
-#: fdisk/sfdisk.c:3034
-#, c-format
-msgid ""
-"You have %d active primary partitions. This does not matter for LILO,\n"
-"but the DOS MBR will only boot a disk with 1 active partition.\n"
+#: include/pt-gpt-partnames.h:150
+msgid "HiFive Unleashed BBL"
msgstr ""
-"您有 %d 塊作用中的主要分割區。這個不會影響到 LILO，\n"
-"但是 DOS MBR 只能將具有一塊作用中分割區的磁碟開機。\n"
-#: fdisk/sfdisk.c:3051
-#, fuzzy, c-format
-msgid "partition %s has id %x and is not hidden"
-msgstr "分割區 %s 具有識別號 %x 而且並未隱藏\n"
+#: include/pt-mbr-partnames.h:1
+msgid "Empty"
+msgstr "空"
-#: fdisk/sfdisk.c:3111
-#, fuzzy, c-format
-msgid "Bad Id %lx"
-msgstr "不當的識別號 %lx\n"
+#: include/pt-mbr-partnames.h:2
+msgid "FAT12"
+msgstr "FAT12"
-#: fdisk/sfdisk.c:3129
-msgid "This disk is currently in use.\n"
-msgstr "這個磁碟為目前在使用中。\n"
+#: include/pt-mbr-partnames.h:3
+msgid "XENIX root"
+msgstr "XENIX root"
-#: fdisk/sfdisk.c:3150
-#, fuzzy, c-format
-msgid "Fatal error: cannot find %s"
-msgstr "嚴重錯誤：找不到 %s\n"
+#: include/pt-mbr-partnames.h:4
+msgid "XENIX usr"
+msgstr "XENIX usr"
-#: fdisk/sfdisk.c:3153
-#, c-format
-msgid "Warning: %s is not a block device\n"
-msgstr "警告：%s 並非區塊裝置\n"
+#: include/pt-mbr-partnames.h:5
+msgid "FAT16 <32M"
+msgstr "FAT16 <32M"
-#: fdisk/sfdisk.c:3159
-msgid "Checking that no-one is using this disk right now ...\n"
-msgstr "檢查是否沒有人現在正使用這個磁碟…\n"
+#: include/pt-mbr-partnames.h:6
+msgid "Extended"
+msgstr "延伸"
-#: fdisk/sfdisk.c:3161
-msgid ""
-"\n"
-"This disk is currently in use - repartitioning is probably a bad idea.\n"
-"Umount all file systems, and swapoff all swap partitions on this disk.\n"
-"Use the --no-reread flag to suppress this check.\n"
-msgstr ""
-"\n"
-"這個磁碟目前在使用中 - 重新設定分割區可能不是個好主意。\n"
-"卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n"
-"使用 --no-reread 旗標以抑制這個檢查。\n"
+#: include/pt-mbr-partnames.h:7
+msgid "FAT16"
+msgstr "FAT16"
-#: fdisk/sfdisk.c:3165
-msgid "Use the --force flag to overrule all checks.\n"
-msgstr "使用 --force 旗標以駁回所有檢查。\n"
+#: include/pt-mbr-partnames.h:8
+#, fuzzy
+msgid "HPFS/NTFS/exFAT"
+msgstr "HPFS/NTFS/exFAT"
-#: fdisk/sfdisk.c:3169
-msgid "OK\n"
-msgstr "確定\n"
+#: include/pt-mbr-partnames.h:9
+msgid "AIX"
+msgstr "AIX"
-#: fdisk/sfdisk.c:3178
-#, c-format
-msgid "Old situation:\n"
-msgstr "舊的情況：\n"
+#: include/pt-mbr-partnames.h:10
+msgid "AIX bootable"
+msgstr "AIX 可開機"
-#: fdisk/sfdisk.c:3182
-#, fuzzy, c-format
-msgid "Partition %d does not exist, cannot change it"
-msgstr "分割區 %d 不存在，無法變更它\n"
+#: include/pt-mbr-partnames.h:11
+msgid "OS/2 Boot Manager"
+msgstr "OS/2 開機管理員"
-#: fdisk/sfdisk.c:3190
-#, c-format
-msgid "New situation:\n"
-msgstr "新的情況：\n"
+#: include/pt-mbr-partnames.h:12
+msgid "W95 FAT32"
+msgstr "W95 FAT32"
-#: fdisk/sfdisk.c:3195
-#, fuzzy
-msgid ""
-"I don't like these partitions - nothing changed.\n"
-"(If you really want this, use the --force option.)"
-msgstr ""
-"我不喜歡這些分割 - 沒有變更任何東西。\n"
-"(如果您真的想要如此，請使用 --force 選項。)\n"
+#: include/pt-mbr-partnames.h:13
+msgid "W95 FAT32 (LBA)"
+msgstr "W95 FAT32 (LBA)"
-#: fdisk/sfdisk.c:3198
-msgid "I don't like this - probably you should answer No\n"
-msgstr "我不喜歡這個 - 您也許應該回答 No\n"
+#: include/pt-mbr-partnames.h:14
+msgid "W95 FAT16 (LBA)"
+msgstr "W95 FAT16 (LBA)"
-#: fdisk/sfdisk.c:3203
-#, c-format
-msgid "Are you satisfied with this? [ynq] "
-msgstr "您滿意這個嗎？[ynq] "
+#: include/pt-mbr-partnames.h:15
+msgid "W95 Ext'd (LBA)"
+msgstr "W95 Ext'd (LBA)"
-#: fdisk/sfdisk.c:3205
-#, c-format
-msgid "Do you want to write this to disk? [ynq] "
-msgstr "您要將這個寫入磁碟嗎？[ynq] "
+#: include/pt-mbr-partnames.h:16
+msgid "OPUS"
+msgstr "OPUS"
-#: fdisk/sfdisk.c:3210
-#, c-format
-msgid ""
-"\n"
-"sfdisk: premature end of input\n"
-msgstr ""
-"\n"
-"sfdisk：未達結尾的輸入\n"
+#: include/pt-mbr-partnames.h:17
+msgid "Hidden FAT12"
+msgstr "隱藏 FAT12"
-#: fdisk/sfdisk.c:3212
-#, fuzzy
-msgid "Quitting - nothing changed"
-msgstr "離開中 - 沒有變更任何東西\n"
+#: include/pt-mbr-partnames.h:18
+msgid "Compaq diagnostics"
+msgstr "Compaq 診斷"
-#: fdisk/sfdisk.c:3218
-#, c-format
-msgid "Please answer one of y,n,q\n"
-msgstr "請以 y,n,q 之一回答\n"
+#: include/pt-mbr-partnames.h:19
+msgid "Hidden FAT16 <32M"
+msgstr "隱藏 FAT16 <32M"
-#: fdisk/sfdisk.c:3226
-#, c-format
-msgid ""
-"Successfully wrote the new partition table\n"
-"\n"
-msgstr ""
-"成功寫入新的分割表\n"
-"\n"
+#: include/pt-mbr-partnames.h:20
+msgid "Hidden FAT16"
+msgstr "隱藏 FAT16"
-#: fdisk/sfdisk.c:3234
-msgid ""
-"If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
-"to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
-"(See fdisk(8).)\n"
-msgstr ""
-"如果您建立或變更 DOS 分割區(假設是 /dev/foo7)，就得使用 dd(1)\n"
-"將開頭的 512 位元組歸零：dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
-"(參看 fdisk(8).)\n"
+#: include/pt-mbr-partnames.h:21
+msgid "Hidden HPFS/NTFS"
+msgstr "隱藏 HPFS/NTFS"
-#: fsck/fsck.c:274 lib/path.c:98 lib/path.c:119 lib/path.c:165
-#, c-format
-msgid "failed to read: %s"
-msgstr "讀取時失敗：%s"
+#: include/pt-mbr-partnames.h:22
+msgid "AST SmartSleep"
+msgstr "AST 智慧休眠"
-#: fsck/fsck.c:276 lib/path.c:121
-#, c-format
-msgid "parse error: %s"
-msgstr "剖析錯誤：%s"
+#: include/pt-mbr-partnames.h:23
+msgid "Hidden W95 FAT32"
+msgstr "隱藏 W95 FAT32"
-#: fsck/fsck.c:296
-#, fuzzy, c-format
-msgid "Locking disk %s ... "
-msgstr "同步磁碟。\n"
+#: include/pt-mbr-partnames.h:24
+msgid "Hidden W95 FAT32 (LBA)"
+msgstr "隱藏 W95 FAT32 (LBA)"
-#: fsck/fsck.c:306
-#, c-format
-msgid "(waiting) "
-msgstr ""
+#: include/pt-mbr-partnames.h:25
+msgid "Hidden W95 FAT16 (LBA)"
+msgstr "隱藏 W95 FAT16 (LBA)"
-#. TRANSLATORS: These are followups to "Locking disk...".
-#: fsck/fsck.c:316
+#: include/pt-mbr-partnames.h:26
+msgid "NEC DOS"
+msgstr "NEC DOS"
+
+#: include/pt-mbr-partnames.h:27
#, fuzzy
-msgid "succeeded"
-msgstr "%s 成功。\n"
+msgid "Hidden NTFS WinRE"
+msgstr "隱藏 NTFS WinRE"
-#: fsck/fsck.c:316
-#, fuzzy
-msgid "failed"
-msgstr "%s 失敗。\n"
+#: include/pt-mbr-partnames.h:28
+msgid "Plan 9"
+msgstr "Plan 9"
-#: fsck/fsck.c:445
-#, fuzzy, c-format
-msgid "WARNING: couldn't open %s"
-msgstr "警告：無法開啟 %s：%s\n"
+#: include/pt-mbr-partnames.h:29
+msgid "PartitionMagic recovery"
+msgstr "PartitionMagic 復原"
-#: fsck/fsck.c:454
-#, fuzzy, c-format
-msgid "WARNING: bad format on line %d of %s"
-msgstr "警告：不當的格式於 %2$s 的第 %1$d 列\n"
+#: include/pt-mbr-partnames.h:30
+msgid "Venix 80286"
+msgstr "Venix 80286"
-#: fsck/fsck.c:470
-#, fuzzy
-msgid ""
-"WARNING: Your /etc/fstab does not contain the fsck passno\n"
-"\tfield. I will kludge around things for you, but you\n"
-"\tshould fix your /etc/fstab file as soon as you can.\n"
-msgstr ""
-"警告：您的 /etc/fstab 不包含 fsck passno\n"
-"\t欄位。我將為您打點瑣事，但是您\n"
-"\t應該儘快修正您的 /etc/fstab 檔案。\n"
-"\n"
+#: include/pt-mbr-partnames.h:31
+msgid "PPC PReP Boot"
+msgstr "PPC PReP 開機"
-#: fsck/fsck.c:575 sys-utils/umount.c:216
-#, fuzzy, c-format
-msgid "%s: not found"
-msgstr "fsck：%s：找不到\n"
+#: include/pt-mbr-partnames.h:32
+msgid "SFS"
+msgstr "SFS"
-#: fsck/fsck.c:695
-#, fuzzy
-msgid "wait: no more child process?!?"
-msgstr "%s：等待：沒有更多子進程 ?!?\n"
+#: include/pt-mbr-partnames.h:33
+msgid "QNX4.x"
+msgstr "QNX4.x"
-#: fsck/fsck.c:716
-#, fuzzy, c-format
-msgid "Warning... %s for device %s exited with signal %d."
-msgstr "警告…%s 用於裝置 %s 已用信號 %d 離開。\n"
+#: include/pt-mbr-partnames.h:34
+msgid "QNX4.x 2nd part"
+msgstr "QNX4.x 第二部分"
-#: fsck/fsck.c:722
-#, fuzzy, c-format
-msgid "%s %s: status is %x, should never happen."
-msgstr "%s %s：狀態是 %x，應該永遠不會發生。\n"
+#: include/pt-mbr-partnames.h:35
+msgid "QNX4.x 3rd part"
+msgstr "QNX4.x 第三部分"
-#: fsck/fsck.c:761
-#, c-format
-msgid "Finished with %s (exit status %d)\n"
-msgstr "以 %s 完成 (離開狀態 %d)\n"
+#: include/pt-mbr-partnames.h:36
+msgid "OnTrack DM"
+msgstr "OnTrack DM"
-#: fsck/fsck.c:821
-#, fuzzy, c-format
-msgid "error %d while executing fsck.%s for %s"
-msgstr "%s：錯誤 %d 當執行 fsck.%s 用於 %s\n"
+#: include/pt-mbr-partnames.h:37
+msgid "OnTrack DM6 Aux1"
+msgstr "OnTrack DM6 Aux1"
-#: fsck/fsck.c:892
-#, fuzzy
-msgid ""
-"Either all or none of the filesystem types passed to -t must be prefixed\n"
-"with 'no' or '!'."
-msgstr ""
-"當檔案系統類型傳遞給 -t 時必須全部或是沒有任何一項\n"
-"加上前綴「no」或「!」。\n"
+#: include/pt-mbr-partnames.h:38
+msgid "CP/M"
+msgstr "CP/M"
-#: fsck/fsck.c:1005
-#, fuzzy, c-format
-msgid ""
-"%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
-msgstr "%s：跳過 /etc/fstab 中不當的列：以非零值 fsck 通過數字連結掛載\n"
+#: include/pt-mbr-partnames.h:39
+msgid "OnTrack DM6 Aux3"
+msgstr "OnTrack DM6 Aux3"
-#: fsck/fsck.c:1017
-#, c-format
-msgid "%s: skipping nonexistent device\n"
-msgstr "%s：跳過不存在的裝置\n"
+#: include/pt-mbr-partnames.h:40
+msgid "OnTrackDM6"
+msgstr "OnTrackDM6"
-#: fsck/fsck.c:1022
-#, c-format
-msgid ""
-"%s: nonexistent device (\"nofail\" fstab option may be used to skip this "
-"device)\n"
-msgstr ""
+#: include/pt-mbr-partnames.h:41
+msgid "EZ-Drive"
+msgstr "EZ-Drive"
-#: fsck/fsck.c:1053
-#, fuzzy, c-format
-msgid "cannot check %s: fsck.%s not found"
-msgstr "fsck：無法檢查 %s：找不到 fsck.%s\n"
+#: include/pt-mbr-partnames.h:42
+msgid "Golden Bow"
+msgstr "Golden Bow"
-#: fsck/fsck.c:1139
-msgid "Checking all file systems.\n"
-msgstr "檢查所有檔案系統。\n"
+#: include/pt-mbr-partnames.h:43
+msgid "Priam Edisk"
+msgstr "Priam Edisk"
-#: fsck/fsck.c:1230
-#, c-format
-msgid "--waiting-- (pass %d)\n"
-msgstr "--等待-- (通過 %d)\n"
+#: include/pt-mbr-partnames.h:44 include/pt-mbr-partnames.h:91
+#: include/pt-mbr-partnames.h:101 include/pt-mbr-partnames.h:102
+msgid "SpeedStor"
+msgstr "SpeedStor"
-#: fsck/fsck.c:1250
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [fsck-options] [fs-options] [filesys ...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: include/pt-mbr-partnames.h:45
+msgid "GNU HURD or SysV"
+msgstr "GNU HURD 或 SysV"
-#: fsck/fsck.c:1254
-msgid ""
-"\n"
-"Options:\n"
-" -A check all filesystems\n"
-" -R skip root filesystem; useful only with `-A'\n"
-" -M do not check mounted filesystems\n"
-" -t <type> specify filesystem types to be checked;\n"
-" type is allowed to be comma-separated list\n"
-" -P check filesystems in parallel, including root\n"
-" -s serialize fsck operations\n"
-" -l lock the device using flock()\n"
-" -N do not execute, just show what would be done\n"
-" -T do not show the title on startup\n"
-" -C <fd> display progress bar; file descriptor is for GUIs\n"
-" -V explain what is being done\n"
-" -? display this help and exit\n"
-"\n"
-"See fsck.* commands for fs-options."
-msgstr ""
+#: include/pt-mbr-partnames.h:46
+msgid "Novell Netware 286"
+msgstr "Novell Netware 286"
-#: fsck/fsck.c:1305
-#, fuzzy
-msgid "too many devices"
-msgstr "%s：太多裝置\n"
+#: include/pt-mbr-partnames.h:47
+msgid "Novell Netware 386"
+msgstr "Novell Netware 386"
-#: fsck/fsck.c:1313
-#, fuzzy, c-format
-msgid "couldn't open %s"
-msgstr "無法開啟 %s\n"
+#: include/pt-mbr-partnames.h:48
+msgid "DiskSecure Multi-Boot"
+msgstr "DiskSecure 多種開機"
-#: fsck/fsck.c:1315
-#, fuzzy
-msgid "Is /proc mounted?"
-msgstr "/proc 已經掛載？\n"
+#: include/pt-mbr-partnames.h:49
+msgid "PC/IX"
+msgstr "PC/IX"
-#: fsck/fsck.c:1323
-#, fuzzy, c-format
-msgid "must be root to scan for matching filesystems: %s"
-msgstr "必須是 root 才能掃描符合的檔案系統：%s\n"
+#: include/pt-mbr-partnames.h:50
+msgid "Old Minix"
+msgstr "舊版 Minix"
-#: fsck/fsck.c:1327
-#, fuzzy, c-format
-msgid "couldn't find matching filesystem: %s"
-msgstr "找不到符合的檔案系統：%s\n"
+#: include/pt-mbr-partnames.h:51
+msgid "Minix / old Linux"
+msgstr "Minix / 舊版 Linux"
-#: fsck/fsck.c:1335 fsck/fsck.c:1420
-#, fuzzy
-msgid "too many arguments"
-msgstr "%s：太多引數\n"
+#: include/pt-mbr-partnames.h:52
+msgid "Linux swap / Solaris"
+msgstr "Linux 交換區/ Solaris"
-#: fsck/fsck.c:1473
-msgid "the -l option can be used with one device only -- ignore"
-msgstr ""
+#: include/pt-mbr-partnames.h:53
+msgid "Linux"
+msgstr "Linux"
-#: getopt/getopt.c:219
-#, fuzzy, c-format
-msgid "Try `%s --help' for more information.\n"
+#: include/pt-mbr-partnames.h:54
+msgid "OS/2 hidden or Intel hibernation"
msgstr ""
-"%s: %s\n"
-"嘗試「%s --help」以獲得更多資訊。\n"
-#: getopt/getopt.c:288
-msgid "empty long option after -l or --long argument"
-msgstr "-l 或 --long 引數之後出現空的長選項"
+#: include/pt-mbr-partnames.h:57
+msgid "Linux extended"
+msgstr "Linux 擴展"
-#: getopt/getopt.c:309
-msgid "unknown shell after -s or --shell argument"
-msgstr "-s 或 --shell 引數之後出現不明的命令殼名稱"
+#: include/pt-mbr-partnames.h:58 include/pt-mbr-partnames.h:59
+msgid "NTFS volume set"
+msgstr "NTFS 卷冊集"
-#: getopt/getopt.c:317
-#, fuzzy, c-format
-msgid ""
-" %1$s optstring parameters\n"
-" %1$s [options] [--] optstring parameters\n"
-" %1$s [options] -o|--options optstring [options] [--] parameters\n"
-msgstr " getopt [選項] -o|--options 選項字串 [選項] [--]\n"
+#: include/pt-mbr-partnames.h:60
+msgid "Linux plaintext"
+msgstr "Linux 純文字"
-#: getopt/getopt.c:323
-#, fuzzy
-msgid ""
-" -a, --alternative Allow long options starting with single -\n"
-msgstr " -a, --alternative 允許長選項以單一 - 開始\n"
+#: include/pt-mbr-partnames.h:62
+msgid "Amoeba"
+msgstr "Amoeba"
-#: getopt/getopt.c:324
-#, fuzzy
-msgid " -h, --help This small usage guide\n"
-msgstr " -h, --help 這份簡單用法說明\n"
+#: include/pt-mbr-partnames.h:63
+msgid "Amoeba BBT"
+msgstr "Amoeba BBT"
-#: getopt/getopt.c:325
-#, fuzzy
-msgid " -l, --longoptions <longopts> Long options to be recognized\n"
-msgstr " -l, --longoptions=長選項 做為辨識的長選項\n"
+#: include/pt-mbr-partnames.h:64
+msgid "BSD/OS"
+msgstr "BSD/OS"
-#: getopt/getopt.c:326
-#, fuzzy
-msgid ""
-" -n, --name <progname> The name under which errors are reported\n"
-msgstr " -n, --name=程式名稱 錯誤報告時所用的名稱\n"
+#: include/pt-mbr-partnames.h:65
+msgid "IBM Thinkpad hibernation"
+msgstr "IBM Thinkpad hibernation"
-#: getopt/getopt.c:327
-#, fuzzy
-msgid " -o, --options <optstring> Short options to be recognized\n"
-msgstr " -o, --options=選項字串 做為辨識的短選項\n"
+#: include/pt-mbr-partnames.h:66
+msgid "FreeBSD"
+msgstr "FreeBSD"
-#: getopt/getopt.c:328
-#, fuzzy
-msgid " -q, --quiet Disable error reporting by getopt(3)\n"
-msgstr " -q, --quiet 停用 getopt(3) 發出的錯誤報告\n"
+#: include/pt-mbr-partnames.h:67
+msgid "OpenBSD"
+msgstr "OpenBSD"
-#: getopt/getopt.c:329
-#, fuzzy
-msgid " -Q, --quiet-output No normal output\n"
-msgstr " -Q, --quiet-output 沒有一般的輸出\n"
+#: include/pt-mbr-partnames.h:68
+msgid "NeXTSTEP"
+msgstr "NeXTSTEP"
-#: getopt/getopt.c:330
-#, fuzzy
-msgid " -s, --shell <shell> Set shell quoting conventions\n"
-msgstr " -s, --shell=命令殼 設定命令殼引號慣例\n"
+#: include/pt-mbr-partnames.h:69
+msgid "Darwin UFS"
+msgstr "Darwin UFS"
-#: getopt/getopt.c:331
-#, fuzzy
-msgid " -T, --test Test for getopt(1) version\n"
-msgstr " -T, --test 測試 getopt(1) 的版本\n"
+#: include/pt-mbr-partnames.h:70
+msgid "NetBSD"
+msgstr "NetBSD"
-#: getopt/getopt.c:332
-#, fuzzy
-msgid " -u, --unquote Do not quote the output\n"
-msgstr " -u, --unqote 輸出不加上引號\n"
+#: include/pt-mbr-partnames.h:71
+msgid "Darwin boot"
+msgstr "Darwin 開機"
+
+#: include/pt-mbr-partnames.h:72
+msgid "HFS / HFS+"
+msgstr "HFS / HFS+"
+
+#: include/pt-mbr-partnames.h:73
+msgid "BSDI fs"
+msgstr "BSDI fs"
+
+#: include/pt-mbr-partnames.h:74
+msgid "BSDI swap"
+msgstr "BSDI 交換區"
+
+#: include/pt-mbr-partnames.h:75
+msgid "Boot Wizard hidden"
+msgstr "開機精靈隱藏"
-#: getopt/getopt.c:333
+#: include/pt-mbr-partnames.h:76
#, fuzzy
-msgid " -V, --version Output version information\n"
-msgstr " -V, --version 輸出版本資訊\n"
+msgid "Acronis FAT32 LBA"
+msgstr "W95 FAT32 (LBA)"
-#: getopt/getopt.c:382 getopt/getopt.c:443
-msgid "missing optstring argument"
-msgstr "缺少選項字串引數"
+#: include/pt-mbr-partnames.h:78
+msgid "Solaris"
+msgstr "Solaris"
-#: getopt/getopt.c:438
-msgid "internal error, contact the author."
-msgstr "內部錯誤，請與作者連絡。"
+#: include/pt-mbr-partnames.h:79
+msgid "DRDOS/sec (FAT-12)"
+msgstr "DRDOS/sec (FAT-12)"
-#: hwclock/cmos.c:217
-#, c-format
-msgid "booted from MILO\n"
-msgstr "從 MILO 開機\n"
+#: include/pt-mbr-partnames.h:80
+msgid "DRDOS/sec (FAT-16 < 32M)"
+msgstr "DRDOS/sec (FAT-16 < 32M)"
-#: hwclock/cmos.c:229
-#, c-format
-msgid "Ruffian BCD clock\n"
-msgstr "Ruffian BCD 時鐘\n"
+#: include/pt-mbr-partnames.h:81
+msgid "DRDOS/sec (FAT-16)"
+msgstr "DRDOS/sec (FAT-16)"
-#: hwclock/cmos.c:248
-#, c-format
-msgid "clockport adjusted to 0x%x\n"
-msgstr "時鐘通訊埠調整到 0x%x\n"
+#: include/pt-mbr-partnames.h:82
+msgid "Syrinx"
+msgstr "Syrinx"
-#: hwclock/cmos.c:264
-#, c-format
-msgid "funky TOY!\n"
-msgstr "畏縮的玩具！\n"
+#: include/pt-mbr-partnames.h:83
+msgid "Non-FS data"
+msgstr "Non-FS 資料"
+
+#: include/pt-mbr-partnames.h:84
+msgid "CP/M / CTOS / ..."
+msgstr "CP/M / CTOS /…"
+
+#: include/pt-mbr-partnames.h:86
+msgid "Dell Utility"
+msgstr "Dell 公用程式"
+
+#: include/pt-mbr-partnames.h:87
+msgid "BootIt"
+msgstr "BootIt"
+
+#: include/pt-mbr-partnames.h:88
+msgid "DOS access"
+msgstr "DOS 存取"
+
+#: include/pt-mbr-partnames.h:90
+msgid "DOS R/O"
+msgstr "DOS R/O"
+
+#: include/pt-mbr-partnames.h:97
+msgid "BeOS fs"
+msgstr "BeOS fs"
+
+#: include/pt-mbr-partnames.h:99
+msgid "EFI (FAT-12/16/32)"
+msgstr "EFI (FAT-12/16/32)"
+
+#: include/pt-mbr-partnames.h:100
+msgid "Linux/PA-RISC boot"
+msgstr "Linux/PA-RISC 開機"
+
+#: include/pt-mbr-partnames.h:103
+msgid "DOS secondary"
+msgstr "DOS 次級"
+
+#: include/pt-mbr-partnames.h:105
+msgid "VMware VMKCORE"
+msgstr "VMware VMKCORE"
+
+#: include/pt-mbr-partnames.h:106 libfdisk/src/sun.c:54
+msgid "Linux raid autodetect"
+msgstr "Linux raid 自動偵測"
+
+#: include/pt-mbr-partnames.h:109
+msgid "LANstep"
+msgstr "LANstep"
+
+#: include/pt-mbr-partnames.h:110
+msgid "BBT"
+msgstr "BBT"
-#: hwclock/cmos.c:292
+#: lib/blkdev.c:273
#, fuzzy, c-format
-msgid "atomic %s failed for 1000 iterations!"
-msgstr "%s：基元 %s 於 1000 次反覆運算時失敗！"
+msgid "warning: %s is misaligned"
+msgstr "警告：%s 被 misaligned"
-#: hwclock/cmos.c:319
+#: libfdisk/src/ask.c:505 libfdisk/src/ask.c:517
#, fuzzy, c-format
-msgid "cmos_read(): write to control address %X failed: %m\n"
-msgstr "cmos_read()：寫入控制位址 %X 失敗：%s\n"
+msgid "Selected partition %ju"
+msgstr "已選分割區 %d\n"
+
+#: libfdisk/src/ask.c:508
+#, fuzzy
+msgid "No partition is defined yet!"
+msgstr "尚無分割區被定義！\n"
+
+#: libfdisk/src/ask.c:520
+#, fuzzy
+msgid "No free partition available!"
+msgstr "沒有可用的磁區存在\n"
+
+#: libfdisk/src/ask.c:530
+msgid "Partition number"
+msgstr "分割區編號"
-#: hwclock/cmos.c:324
+#: libfdisk/src/ask.c:1027
#, fuzzy, c-format
-msgid "cmos_read(): read data address %X failed: %m\n"
-msgstr "cmos_read()：讀取資料位址 %X 失敗：%s\n"
+msgid "Created a new partition %d of type '%s' and of size %s."
+msgstr "分割 %d 的型態 %s 和的大小 %s 是設定\n"
-#: hwclock/cmos.c:362
+#: libfdisk/src/bsd.c:165
#, fuzzy, c-format
-msgid "cmos_write(): write to control address %X failed: %m\n"
-msgstr "cmos_write()：寫入控制位址 %X 失敗：%s\n"
+msgid "Partition %zd: has invalid starting sector 0."
+msgstr "分割區 %s 具有無效的開始磁區 0。\n"
-#: hwclock/cmos.c:368
+#: libfdisk/src/bsd.c:180
#, fuzzy, c-format
-msgid "cmos_write(): write to data address %X failed: %m\n"
-msgstr "cmos_write()：寫入資料位址 %X 失敗：%s\n"
+msgid "There is no *BSD partition on %s."
+msgstr "沒有任何 *BSD 分割位於 %s。\n"
-#: hwclock/cmos.c:637
+#: libfdisk/src/bsd.c:258 libfdisk/src/dos.c:948
#, fuzzy
-msgid "Cannot open /dev/port"
-msgstr "ç\84¡æ³\95é\96\8bå\95\9f /dev/portï¼\9a%s"
+msgid "First cylinder"
+msgstr "ç£\81æ\9f±"
-#: hwclock/cmos.c:644
+#: libfdisk/src/bsd.c:291 libfdisk/src/dos.c:1258
#, fuzzy
-msgid "I failed to get permission because I didn't try."
-msgstr "因為我並未嘗試而無法取得權限。\n"
+msgid "Last cylinder, +/-cylinders or +/-size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: hwclock/cmos.c:647
+#: libfdisk/src/bsd.c:296 libfdisk/src/dos.c:1263 libfdisk/src/gpt.c:2318
#, fuzzy
-msgid "unable to get I/O port access: the iopl(3) call failed."
-msgstr "%s 無法存取 I/O 連接埠：iopl(3) 呼叫失敗。\n"
-
-#: hwclock/cmos.c:650
-msgid "Probably you need root privileges.\n"
-msgstr "您大概需要系統管理者權限。\n"
+msgid "Last sector, +/-sectors or +/-size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: hwclock/hwclock.c:169
+#: libfdisk/src/bsd.c:381
#, fuzzy, c-format
-msgid "cannot write %s"
-msgstr "無法開啟 %s"
-
-#: hwclock/hwclock.c:238
-#, c-format
-msgid "Assuming hardware clock is kept in %s time.\n"
-msgstr "假設硬體時鐘被保持在 %s 時間。\n"
-
-#: hwclock/hwclock.c:239 hwclock/hwclock.c:329
-msgid "UTC"
-msgstr "UTC"
-
-#: hwclock/hwclock.c:239 hwclock/hwclock.c:328
-msgid "local"
-msgstr "本地"
+msgid "The device %s does not contain BSD disklabel."
+msgstr "%s 不含任何磁碟標籤。\n"
-#: hwclock/hwclock.c:313
+#: libfdisk/src/bsd.c:383
#, fuzzy
-msgid ""
-"Warning: unrecognized third line in adjtime file\n"
-"(Expected: `UTC' or `LOCAL' or nothing.)"
-msgstr "%s：警告：無法辨識 adjtime 檔案中的第三列\n"
-
-#: hwclock/hwclock.c:322
-#, c-format
-msgid "Last drift adjustment done at %ld seconds after 1969\n"
-msgstr "最後一次偏差調整已於 1969 年之後 %ld 秒完成\n"
-
-#: hwclock/hwclock.c:324
-#, c-format
-msgid "Last calibration done at %ld seconds after 1969\n"
-msgstr "最後一次校測已於 1969 年之後 %ld 秒完成\n"
+msgid "Do you want to create a BSD disklabel?"
+msgstr "您要建立磁碟標籤嗎？(y/n) "
-#: hwclock/hwclock.c:326
-#, c-format
-msgid "Hardware clock is on %s time\n"
-msgstr "硬é«\94æ\99\82é\90\98ä½\8dæ\96¼ %s æ\99\82é\96\93\n"
+#: libfdisk/src/bsd.c:449
+#, fuzzy
+msgid "Disk"
+msgstr "ç£\81ç¢\9fï¼\9a%.*s\n"
-#: hwclock/hwclock.c:329 misc-utils/findmnt.c:379 schedutils/ionice.c:78
-msgid "unknown"
-msgstr "不明的"
+#: libfdisk/src/bsd.c:456
+msgid "Packname"
+msgstr ""
-#: hwclock/hwclock.c:353
-#, c-format
-msgid "Waiting for clock tick...\n"
-msgstr "等候時鐘週期…\n"
+#: libfdisk/src/bsd.c:463 libfdisk/src/sun.c:1137
+msgid "Flags"
+msgstr "屬性旗標"
-#: hwclock/hwclock.c:359
-#, c-format
-msgid "...synchronization failed\n"
-msgstr "...同步化失敗\n"
+#: libfdisk/src/bsd.c:466
+msgid " removable"
+msgstr " 可移除的"
-#: hwclock/hwclock.c:361
-#, c-format
-msgid "...got clock tick\n"
-msgstr "…獲得時鐘週期\n"
+#: libfdisk/src/bsd.c:467
+msgid " ecc"
+msgstr " ecc"
-#: hwclock/hwclock.c:417
-#, c-format
-msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
-msgstr "硬體時鐘的無效值：%4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
+#: libfdisk/src/bsd.c:468
+msgid " badsect"
+msgstr " 不良磁區"
-#: hwclock/hwclock.c:426
-#, c-format
-msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
-msgstr "硬體時鐘時間：%4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
+#: libfdisk/src/bsd.c:476
+#, fuzzy
+msgid "Bytes/Sector"
+msgstr "位元組/磁區"
-#: hwclock/hwclock.c:460
-#, c-format
-msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
-msgstr "從硬體時鐘讀取時間：%4d/%.2d/%.2d %02d:%02d:%02d\n"
+#: libfdisk/src/bsd.c:481
+#, fuzzy
+msgid "Tracks/Cylinder"
+msgstr "磁軌/磁柱"
-#: hwclock/hwclock.c:488
-#, c-format
-msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
-msgstr "設定硬體時鐘為 %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
+#: libfdisk/src/bsd.c:486
+#, fuzzy
+msgid "Sectors/Cylinder"
+msgstr "磁區/磁柱"
-#: hwclock/hwclock.c:494
-#, c-format
-msgid "Clock not changed - testing only.\n"
-msgstr "時鐘未變更 - 只做為測試。\n"
+#: libfdisk/src/bsd.c:491 libfdisk/src/bsd.c:1029 libfdisk/src/dos.c:2498
+#: libfdisk/src/sgi.c:1157 libfdisk/src/sun.c:203 libfdisk/src/sun.c:1133
+msgid "Cylinders"
+msgstr "磁柱"
-#: hwclock/hwclock.c:552
-#, c-format
-msgid ""
-"Time elapsed since reference time has been %.6f seconds.\n"
-"Delaying further to reach the new time.\n"
-msgstr ""
-"從參考時間起算已經過 %.6f 秒。\n"
-"多延遲一點以達到新的時間。\n"
+#: libfdisk/src/bsd.c:496 libfdisk/src/sun.c:783
+#, fuzzy
+msgid "Rpm"
+msgstr "rpm"
-#: hwclock/hwclock.c:588
+#: libfdisk/src/bsd.c:501 libfdisk/src/sgi.c:291 libfdisk/src/sun.c:803
#, fuzzy
-msgid ""
-"The Hardware Clock registers contain values that are either invalid (e.g. "
-"50th day of month) or beyond the range we can handle (e.g. Year 2095)."
-msgstr ""
-"硬體時鐘暫存器所包含的值，若非是無效的 (例如某月第 50 日) 就是位於我們可以處"
-"理的範圍之外 (例如 2095 年)。\n"
+msgid "Interleave"
+msgstr "交錯"
-#: hwclock/hwclock.c:598
-#, c-format
-msgid "%s %.6f seconds\n"
-msgstr "%s %.6f 秒\n"
+#: libfdisk/src/bsd.c:506
+#, fuzzy
+msgid "Trackskew"
+msgstr "trackskew"
-#: hwclock/hwclock.c:629
+#: libfdisk/src/bsd.c:511
#, fuzzy
-msgid "No --date option specified."
-msgstr "未指定 --date 選項。\n"
+msgid "Cylinderskew"
+msgstr "cylinderskew"
-#: hwclock/hwclock.c:635
+#: libfdisk/src/bsd.c:516
#, fuzzy
-msgid "--date argument too long"
-msgstr "--date 引數太長\n"
+msgid "Headswitch"
+msgstr "headswitch"
-#: hwclock/hwclock.c:642
+#: libfdisk/src/bsd.c:521
#, fuzzy
-msgid ""
-"The value of the --date option is not a valid date.\n"
-"In particular, it contains quotation marks."
-msgstr ""
-"--date 選項的值並非有效日期。\n"
-"尤其是它含有引號。\n"
+msgid "Track-to-track seek"
+msgstr "軌對軌搜尋"
-#: hwclock/hwclock.c:650
-#, c-format
-msgid "Issuing date command: %s\n"
-msgstr "執行日期命令：%s\n"
+#: libfdisk/src/bsd.c:611
+msgid "bytes/sector"
+msgstr "位元組/磁區"
-#: hwclock/hwclock.c:654
-msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
-msgstr "ç\84¡æ³\95å\9c¨ /bin/sh å\91½ä»¤æ®¼ä¸é\81\8bè¡\8cã\80\8cdateã\80\8dç¨\8bå¼\8fã\80\82popen() 失æ\95\97"
+#: libfdisk/src/bsd.c:614
+msgid "sectors/track"
+msgstr "ç£\81å\8d\80/ç£\81è»\8c"
-#: hwclock/hwclock.c:662
-#, c-format
-msgid "response from date command = %s\n"
-msgstr "日期命令的回應 = %s\n"
+#: libfdisk/src/bsd.c:615
+msgid "tracks/cylinder"
+msgstr "磁軌/磁柱"
-#: hwclock/hwclock.c:664
-#, fuzzy, c-format
-msgid ""
-"The date command issued by %s returned unexpected results.\n"
-"The command was:\n"
-" %s\n"
-"The response was:\n"
-" %s"
-msgstr ""
-"由 %s 所執行的日期命令回傳了未預期的結果。\n"
-"命令是：\n"
-" %s\n"
-"回應是：\n"
-" %s\n"
+#: libfdisk/src/bsd.c:616
+msgid "cylinders"
+msgstr "磁柱"
-#: hwclock/hwclock.c:675
-#, c-format
-msgid ""
-"The date command issued by %s returned something other than an integer where "
-"the converted time value was expected.\n"
-"The command was:\n"
-" %s\n"
-"The response was:\n"
-" %s\n"
-msgstr ""
-"由 %s 所執行的日期命令回傳了一些非整數的東西，而非預期己轉換的時間值。\n"
-"命令是：\n"
-" %s\n"
-"回應是：\n"
-"%s\n"
+#: libfdisk/src/bsd.c:621
+msgid "sectors/cylinder"
+msgstr "磁區/磁柱"
-#: hwclock/hwclock.c:687
-#, c-format
-msgid "date string %s equates to %ld seconds since 1969.\n"
-msgstr "日期字串 %s 表示自 1969 年以來己過 %ld 秒。\n"
+#: libfdisk/src/bsd.c:624
+msgid "rpm"
+msgstr "rpm"
-#: hwclock/hwclock.c:719
-#, fuzzy
-msgid ""
-"The Hardware Clock does not contain a valid time, so we cannot set the "
-"System Time from it."
-msgstr "硬體時鐘不具有效時間，因而我們無法依其設定系統時間。\n"
+#: libfdisk/src/bsd.c:625
+msgid "interleave"
+msgstr "交錯"
-#: hwclock/hwclock.c:741 hwclock/hwclock.c:822
-#, c-format
-msgid "Calling settimeofday:\n"
-msgstr "呼叫 settimeofday：\n"
+#: libfdisk/src/bsd.c:626
+msgid "trackskew"
+msgstr "trackskew"
-#: hwclock/hwclock.c:742 hwclock/hwclock.c:824
-#, c-format
-msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
-msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
+#: libfdisk/src/bsd.c:627
+msgid "cylinderskew"
+msgstr "cylinderskew"
-#: hwclock/hwclock.c:744 hwclock/hwclock.c:826
-#, c-format
-msgid "\ttz.tz_minuteswest = %d\n"
-msgstr "\ttz.tz_minuteswest = %d\n"
+#: libfdisk/src/bsd.c:629
+msgid "headswitch"
+msgstr "headswitch"
+
+#: libfdisk/src/bsd.c:630
+msgid "track-to-track seek"
+msgstr "軌對軌搜尋"
-#: hwclock/hwclock.c:748 hwclock/hwclock.c:830
+#: libfdisk/src/bsd.c:652
#, c-format
-msgid "Not setting system clock because running in test mode.\n"
-msgstr "未設定系統時鐘，因為在測試模式中執行。\n"
+msgid "The bootstrap file %s successfully loaded."
+msgstr ""
+
+#: libfdisk/src/bsd.c:674
+#, fuzzy, c-format
+msgid "Bootstrap: %1$sboot -> boot%1$s (default %1$s)"
+msgstr "啟動程式：%sboot -> boot%s (%s)："
-#: hwclock/hwclock.c:757 hwclock/hwclock.c:839
+#: libfdisk/src/bsd.c:705
#, fuzzy
-msgid "Must be superuser to set system clock."
-msgstr "å¿\85é \88æ\98¯ç³»çµ±ç®¡ç\90\86è\80\85æ\89\8dè\83½è¨å®\9a系統æ\99\82é\90\98ã\80\82\n"
+msgid "Bootstrap overlaps with disklabel!"
+msgstr "å\95\9få\8b\95ç¨\8bå¼\8fè\88\87ç£\81ç¢\9fæ¨\99籤é\87\8dç\96\8aï¼\81\n"
-#: hwclock/hwclock.c:760 hwclock/hwclock.c:842
-msgid "settimeofday() failed"
-msgstr "settimeofday() 失敗"
+#: libfdisk/src/bsd.c:729
+#, fuzzy, c-format
+msgid "Bootstrap installed on %s."
+msgstr "啟動程式已安裝於 %s。\n"
-#: hwclock/hwclock.c:797
+#: libfdisk/src/bsd.c:911
#, c-format
-msgid "Current system time: %ld = %s\n"
-msgstr "目前的系統時間：%ld = %s\n"
+msgid "Disklabel written to %s. (Don't forget to write the %s disklabel too.)"
+msgstr ""
-#: hwclock/hwclock.c:823
-#, c-format
-msgid "\tUTC: %s\n"
-msgstr "\tUTC：%s\n"
+#: libfdisk/src/bsd.c:914
+#, fuzzy, c-format
+msgid "Disklabel written to %s."
+msgstr "硬碟: %s\n"
-#: hwclock/hwclock.c:871
-#, c-format
-msgid ""
-"Not adjusting drift factor because the Hardware Clock previously contained "
-"garbage.\n"
-msgstr "無法調整偏差係數，因為之前的硬體時鐘包含了無用資料。\n"
+#: libfdisk/src/bsd.c:920 libfdisk/src/context.c:750
+#, fuzzy
+msgid "Syncing disks."
+msgstr "同步磁碟。\n"
-#: hwclock/hwclock.c:876
-#, c-format
-msgid ""
-"Not adjusting drift factor because last calibration time is zero,\n"
-"so history is bad and calibration startover is necessary.\n"
+#: libfdisk/src/bsd.c:961
+msgid "BSD label is not nested within a DOS partition."
msgstr ""
-"無法調整偏差係數，因為最後一次校測時間為零，\n"
-"因而不當的歷史記錄使得啟始校測為必要的。\n"
-#: hwclock/hwclock.c:882
-#, c-format
-msgid ""
-"Not adjusting drift factor because it has been less than a day since the "
-"last calibration.\n"
-msgstr "無法調整偏差係數，因為它從最後一次校測起已經慢過於一天。\n"
+#: libfdisk/src/bsd.c:989
+#, fuzzy, c-format
+msgid "BSD partition '%c' linked to DOS partition %zu."
+msgstr "鏈結 BSD 分割到 non-BSD 分割"
-#: hwclock/hwclock.c:930
-#, c-format
-msgid ""
-"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor "
-"of %f seconds/day.\n"
-"Adjusting drift factor by %f seconds/day\n"
+#: libfdisk/src/bsd.c:1025
+msgid "Slice"
msgstr ""
-"時鐘偏差為 %.1f 秒發生於過去 %d 秒內，而不管 %f 秒/天的偏差係數。\n"
-"以 %f 秒/天來調整偏差係數\n"
-
-#: hwclock/hwclock.c:976
-#, c-format
-msgid "Time since last adjustment is %d seconds\n"
-msgstr "從最後一次調整後經過的時間為 %d 秒\n"
-#: hwclock/hwclock.c:978
-#, c-format
-msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
-msgstr "需要插入 %d 秒並回溯參考 %.6f 秒之前的時間\n"
+#: libfdisk/src/bsd.c:1032
+msgid "Fsize"
+msgstr ""
-#: hwclock/hwclock.c:1008
-#, c-format
-msgid "Not updating adjtime file because of testing mode.\n"
-msgstr "無法更新 adjtime 檔案，因為處於測試模式。\n"
+#: libfdisk/src/bsd.c:1033
+msgid "Bsize"
+msgstr ""
-#: hwclock/hwclock.c:1009
-#, c-format
-msgid ""
-"Would have written the following to %s:\n"
-"%s"
+#: libfdisk/src/bsd.c:1034
+msgid "Cpg"
msgstr ""
-"將會寫入下列資料到 %s:\n"
-"%s"
-#: hwclock/hwclock.c:1018
-#, c-format
-msgid ""
-"Could not open file with the clock adjustment parameters in it (%s) for "
-"writing"
-msgstr "無法以其中的時鐘調整參數 (%s) 開啟檔案用於寫入"
+#: libfdisk/src/context.c:740
+#, fuzzy, c-format
+msgid "%s: fsync device failed"
+msgstr "%s：lseek 失敗"
-#: hwclock/hwclock.c:1024 hwclock/hwclock.c:1031
-#, c-format
-msgid "Could not update file with the clock adjustment parameters (%s) in it"
-msgstr "無法以其中的時鐘調整參數 (%s) 更新檔案"
+#: libfdisk/src/context.c:745
+#, fuzzy, c-format
+msgid "%s: close device failed"
+msgstr "%s：lseek 失敗"
-#: hwclock/hwclock.c:1039
+#: libfdisk/src/context.c:825
#, fuzzy
-msgid "Drift adjustment parameters not updated."
-msgstr "å\81\8f差調æ\95´å\8f\83æ\95¸æ\9cªæ\9b´æ\96°。\n"
+msgid "Calling ioctl() to re-read partition table."
+msgstr "å\91¼å\8f« ioctl() 以é\87\8dæ\96°è®\80å\8f\96å\88\86å\89²è¡¨。\n"
-#: hwclock/hwclock.c:1078
+#: libfdisk/src/context.c:834
#, fuzzy
-msgid ""
-"The Hardware Clock does not contain a valid time, so we cannot adjust it."
-msgstr "硬體時鐘不包含有效時間，因而我們無法調整它。\n"
+msgid "Re-reading the partition table failed."
+msgstr "重新讀取分割表…\n"
-#: hwclock/hwclock.c:1087
-#, c-format
-msgid ""
-"Not setting clock because last adjustment time is zero, so history is bad."
-msgstr "無法設定時鐘因為最後一次調整時間為零，因而歷史記錄是不當的。"
+#: libfdisk/src/context.c:836
+#, fuzzy
+msgid "The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or partx(8)."
+msgstr ""
+"\n"
+"警告：Re-reading 分割表失敗的與錯誤 %d：%m。\n"
+"內核仍然使用舊的表格。新的表格將被使用於\n"
+"下一個重新開機或之後您運行 partprobe (8) 或 kpartx (8)\n"
-#: hwclock/hwclock.c:1109
-#, c-format
-msgid "Needed adjustment is less than one second, so not setting clock.\n"
-msgstr "所需的調整少於一秒鐘，因而無法設定時鐘。\n"
+#: libfdisk/src/context.c:922
+#, fuzzy, c-format
+msgid "Failed to remove partition %zu from system"
+msgstr "移除分割時失敗"
-#: hwclock/hwclock.c:1134
-#, c-format
-msgid "Using %s.\n"
-msgstr "正在使用 %s。\n"
+#: libfdisk/src/context.c:930
+#, fuzzy, c-format
+msgid "Failed to update system information about partition %zu"
+msgstr "%s：不是區塊裝置"
-#: hwclock/hwclock.c:1136
-#, c-format
-msgid "No usable clock interface found.\n"
-msgstr "找不到可用的時鐘介面。\n"
+#: libfdisk/src/context.c:938
+#, fuzzy, c-format
+msgid "Failed to add partition %zu to system"
+msgstr "加入分割時失敗"
-#: hwclock/hwclock.c:1265 hwclock/hwclock.c:1271
-#, c-format
-msgid "Unable to set system clock.\n"
-msgstr "無法設定系統時鐘。\n"
+#: libfdisk/src/context.c:944
+#, fuzzy
+msgid "The kernel still uses the old partitions. The new table will be used at the next reboot. "
+msgstr ""
+"\n"
+"警告：Re-reading 分割表失敗的與錯誤 %d：%m。\n"
+"內核仍然使用舊的表格。新的表格將被使用於\n"
+"下一個重新開機或之後您運行 partprobe (8) 或 kpartx (8)\n"
-#: hwclock/hwclock.c:1284
-#, c-format
-msgid ""
-"At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
-msgstr "1969 年之後 %ld 秒, RTC 預計會讀取 1969 之後 %ld 秒。\n"
+#: libfdisk/src/context.c:1154
+#, fuzzy
+msgid "cylinder"
+msgid_plural "cylinders"
+msgstr[0] "磁柱"
-#: hwclock/hwclock.c:1313
+#: libfdisk/src/context.c:1155
#, fuzzy
-msgid ""
-"The kernel keeps an epoch value for the Hardware Clock only on an Alpha "
-"machine.\n"
-"This copy of hwclock was built for a machine other than Alpha\n"
-"(and thus is presumably not running on an Alpha now). No action taken."
+msgid "sector"
+msgid_plural "sectors"
+msgstr[0] "磁區"
+
+#: libfdisk/src/context.c:1511
+msgid "Incomplete geometry setting."
msgstr ""
-"只有在 Alpha 機器的內核保留時期值以用於硬體時鐘。\n"
-"此一 hwclock 的複本是為了 Alpha 之外的機器所組建\n"
-"(因而推測目前無法於 Alpha 機器中執行)。未採行任何動作。\n"
-#: hwclock/hwclock.c:1330
+#: libfdisk/src/dos.c:213
#, fuzzy
-msgid "Unable to get the epoch value from the kernel."
-msgstr "無法從內核取得時期值。\n"
-
-#: hwclock/hwclock.c:1332
-#, c-format
-msgid "Kernel is assuming an epoch value of %lu\n"
-msgstr "內核假設時期值為 %lu\n"
+msgid "All primary partitions have been defined already."
+msgstr "所有主要分割區已被定義！\n"
-#: hwclock/hwclock.c:1337
+#: libfdisk/src/dos.c:216
#, fuzzy
-msgid ""
-"To set the epoch value, you must use the 'epoch' option to tell to what "
-"value to set it."
-msgstr "要設定時期值，您必須使用「epoch」選項以告訴它要設定為何值。\n"
+msgid "Primary partition not available."
+msgstr "沒有可用的磁區存在\n"
-#: hwclock/hwclock.c:1341
-#, c-format
-msgid "Not setting the epoch to %d - testing only.\n"
-msgstr "不將時期設定為 %d - 只限於測試。\n"
+#: libfdisk/src/dos.c:270
+#, fuzzy, c-format
+msgid "Failed to read extended partition table (offset=%ju)"
+msgstr "%s：無法讀取分割表"
-#: hwclock/hwclock.c:1345
-#, c-format
-msgid "Unable to set the epoch value in the kernel.\n"
-msgstr "無法在內核中設定時期值。\n"
+#: libfdisk/src/dos.c:340
+#, fuzzy
+msgid "You can set geometry from the extra functions menu."
+msgstr ""
+"%s%s.\n"
+"您可以從額外函式選單來做這個。\n"
-#: hwclock/hwclock.c:1374
-msgid " hwclock [function] [option...]\n"
+#: libfdisk/src/dos.c:343
+msgid "DOS-compatible mode is deprecated."
msgstr ""
-#: hwclock/hwclock.c:1376
+#: libfdisk/src/dos.c:347
#, fuzzy
-msgid ""
-"\n"
-"Functions:\n"
+msgid "The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted."
msgstr ""
"\n"
-"選項：\n"
+"裝置呈現的邏輯區大小小於\n"
+"實體磁區大小。建議對齊到實體磁區 (或最佳化\n"
+"I/O) 大小邊界，否則效能也許會被影響。\n"
-#: hwclock/hwclock.c:1377
-msgid ""
-" -h, --help show this help text and exit\n"
-" -r, --show read hardware clock and print result\n"
-" --set set the RTC to the time given with --date\n"
+#: libfdisk/src/dos.c:353
+msgid "Cylinders as display units are deprecated."
msgstr ""
-#: hwclock/hwclock.c:1380
-msgid ""
-" -s, --hctosys set the system time from the hardware clock\n"
-" -w, --systohc set the hardware clock from the current system time\n"
-" --systz set the system time based on the current timezone\n"
-" --adjust adjust the RTC to account for systematic drift since\n"
-" the clock was last set or adjusted\n"
+#: libfdisk/src/dos.c:360
+#, fuzzy, c-format
+msgid "The size of this disk is %s (%ju bytes). DOS partition table format cannot be used on drives for volumes larger than %lu bytes for %lu-byte sectors. Use GUID partition table format (GPT)."
msgstr ""
+"\n"
+"警告：大小的這個磁碟是 %d.%d TB (%llu 位元組)。\n"
+"DOS 分割表格式無法使用的於磁碟用於音量\n"
+"大於 (%llu 位元組) 用於 %ld-byte 磁區。使用退出了 (1) 和 GUID\n"
+"分割表格式 (GPT)。\n"
+"\n"
-#: hwclock/hwclock.c:1386
-msgid ""
-" --getepoch print out the kernel's hardware clock epoch value\n"
-" --setepoch set the kernel's hardware clock epoch value to the \n"
-" value given with --epoch\n"
-msgstr ""
+#: libfdisk/src/dos.c:534
+#, fuzzy
+msgid "Bad offset in primary extended partition."
+msgstr "在主要擴充分割區中的不當偏移值\n"
-#: hwclock/hwclock.c:1390
-msgid ""
-" --predict predict RTC reading at time given with --date\n"
-" -V, --version display version information and exit\n"
+#: libfdisk/src/dos.c:548
+#, fuzzy, c-format
+msgid "Omitting partitions after #%zu. They will be deleted if you save this partition table."
msgstr ""
+"警告：忽略 #%d 之後的分割區。\n"
+"如果您儲存這個分割表就會刪除它們。\n"
-#: hwclock/hwclock.c:1394
-msgid ""
-" -u, --utc the hardware clock is kept in UTC\n"
-" --localtime the hardware clock is kept in local time\n"
-msgstr ""
+#: libfdisk/src/dos.c:581
+#, fuzzy, c-format
+msgid "Extra link pointer in partition table %zu."
+msgstr "警告：在分割表中有額外的鏈結指標 %d\n"
-#: hwclock/hwclock.c:1397
-msgid " -f, --rtc <file> special /dev/... file to use instead of default\n"
-msgstr ""
+#: libfdisk/src/dos.c:589
+#, fuzzy, c-format
+msgid "Ignoring extra data in partition table %zu."
+msgstr "警告：忽略分割表 %d 中的額外資料\n"
-#: hwclock/hwclock.c:1400
-#, c-format
-msgid ""
-" --directisa access the ISA bus directly instead of %s\n"
-" --badyear ignore RTC's year because the BIOS is broken\n"
-" --date <time> specifies the time to which to set the hardware clock\n"
-" --epoch <year> specifies the year which is the beginning of the\n"
-" hardware clock's epoch value\n"
-msgstr ""
+#: libfdisk/src/dos.c:645
+#, fuzzy, c-format
+msgid "omitting empty partition (%zu)"
+msgstr "忽略空的分割 (%d)\n"
-#: hwclock/hwclock.c:1406
-#, c-format
-msgid ""
-" --noadjfile do not access %s; this requires the use of\n"
-" either --utc or --localtime\n"
-" --adjfile <file> specifies the path to the adjust file;\n"
-" the default is %s\n"
-msgstr ""
-
-#: hwclock/hwclock.c:1410
-msgid ""
-" --test do not update anything, just show what would happen\n"
-" -D, --debug debugging mode\n"
-"\n"
-msgstr ""
+#: libfdisk/src/dos.c:705
+#, fuzzy, c-format
+msgid "Created a new DOS disklabel with disk identifier 0x%08x."
+msgstr "建立新的 DOS disklabel 與磁碟識別碼 0x%08x。\n"
-#: hwclock/hwclock.c:1413
+#: libfdisk/src/dos.c:726
#, fuzzy
-msgid ""
-" -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
-" tell hwclock the type of Alpha you have (see hwclock(8))\n"
-"\n"
-msgstr ""
-" -J|--jensen，-A|--arc，-S|--srm，-F|--funky-toy\n"
-" 告訴 hwclock 您所具有的 alpha 類型 (參看 hwclock (8))\n"
+msgid "Enter the new disk identifier"
+msgstr "變更磁碟識別碼"
-#: hwclock/hwclock.c:1509
+#: libfdisk/src/dos.c:733
#, fuzzy
-msgid "Unable to connect to audit system"
-msgstr "%s：無法與稽核系統連接\n"
+msgid "Incorrect value."
+msgstr "無效的設定值"
-#: hwclock/hwclock.c:1600
-#, fuzzy
-msgid "failed to parse epoch"
-msgstr "剖析 pid 時失敗"
+#: libfdisk/src/dos.c:742
+#, fuzzy, c-format
+msgid "Disk identifier changed from 0x%08x to 0x%08x."
+msgstr "磁碟識別碼：0x%08x\n"
-#: hwclock/hwclock.c:1639
-#, c-format
-msgid "%s takes no non-option arguments. You supplied %d.\n"
-msgstr "%s 無需非選項引數。 您卻已給定 %d。\n"
+#: libfdisk/src/dos.c:844
+#, fuzzy, c-format
+msgid "Ignoring extra extended partition %zu"
+msgstr "忽略額外的擴充分割區 %d\n"
-#: hwclock/hwclock.c:1646
-#, fuzzy
-msgid ""
-"You have specified multiple functions.\n"
-"You can only perform one function at a time."
-msgstr ""
-"您已指定多重功能。\n"
-"您只能一次實行一個功能。\n"
+#: libfdisk/src/dos.c:858
+#, fuzzy, c-format
+msgid "Invalid flag 0x%02x%02x of EBR (for partition %zu) will be corrected by w(rite)."
+msgstr "警告：分割表 %2$d 的無效旗標 0x%1$04x 將由 w(rite) 所修正\n"
-#: hwclock/hwclock.c:1652
-#, fuzzy
-msgid ""
-"The --utc and --localtime options are mutually exclusive. You specified "
-"both."
-msgstr "%s：--utc 和 --localtime 選項互斥。 您卻已指定兩者。\n"
+#: libfdisk/src/dos.c:935
+#, fuzzy, c-format
+msgid "Start sector %ju out of range."
+msgstr "數值超出範圍。\n"
-#: hwclock/hwclock.c:1658
-#, fuzzy
-msgid ""
-"The --adjust and --noadjfile options are mutually exclusive. You specified "
-"both."
-msgstr "%s：--adjust 和 --noadjfile 選項互斥。 您卻已指定兩者。\n"
+#: libfdisk/src/dos.c:1127 libfdisk/src/gpt.c:2192 libfdisk/src/sgi.c:838
+#: libfdisk/src/sun.c:528
+#, fuzzy, c-format
+msgid "Partition %zu is already defined. Delete it before re-adding it."
+msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
-#: hwclock/hwclock.c:1664
+#: libfdisk/src/dos.c:1142 libfdisk/src/dos.c:1167 libfdisk/src/dos.c:1229
+#: libfdisk/src/gpt.c:2201
#, fuzzy
-msgid ""
-"The --adjfile and --noadjfile options are mutually exclusive. You specified "
-"both."
-msgstr "%s：--adjust 和 --noadjfile 選項互斥。 您卻已指定兩者。\n"
+msgid "No free sectors available."
+msgstr "沒有可用的磁區存在\n"
+
+#: libfdisk/src/dos.c:1191
+#, fuzzy, c-format
+msgid "Sector %llu is already allocated."
+msgstr "磁區 %llu 已經配置\n"
+
+#: libfdisk/src/dos.c:1385
+#, fuzzy, c-format
+msgid "Adding logical partition %zu"
+msgstr "加入邏輯分割區 %d\n"
+
+#: libfdisk/src/dos.c:1416
+#, fuzzy, c-format
+msgid "Partition %zu: contains sector 0"
+msgstr "警告：分割區 %d 含有磁區 0\n"
+
+#: libfdisk/src/dos.c:1418
+#, fuzzy, c-format
+msgid "Partition %zu: head %d greater than maximum %d"
+msgstr "分割區 %d: 磁頭 %d 大於最大值 %d\n"
+
+#: libfdisk/src/dos.c:1421
+#, fuzzy, c-format
+msgid "Partition %zu: sector %d greater than maximum %llu"
+msgstr "分割區 %d: 磁區 %d 大於最大值 %llu\n"
+
+#: libfdisk/src/dos.c:1424
+#, fuzzy, c-format
+msgid "Partition %zu: cylinder %d greater than maximum %llu"
+msgstr "分割區 %d：磁柱 %d 大於最大值 %llu\n"
+
+#: libfdisk/src/dos.c:1430
+#, fuzzy, c-format
+msgid "Partition %zu: previous sectors %u disagrees with total %u"
+msgstr "分割區 %d: 之前磁區 %d 與總計不一致 %d\n"
+
+#: libfdisk/src/dos.c:1483
+#, fuzzy, c-format
+msgid "Partition %zu: different physical/logical beginnings (non-Linux?): phys=(%d, %d, %d), logical=(%d, %d, %d)"
+msgstr "分割區 %d 有不同的實體/邏輯開始位置 (非 Linux？)：\n"
+
+#: libfdisk/src/dos.c:1494
+#, fuzzy, c-format
+msgid "Partition %zu: different physical/logical endings: phys=(%d, %d, %d), logical=(%d, %d, %d)"
+msgstr "分割區 %d 有不同的實體/邏輯結束位置：\n"
+
+#: libfdisk/src/dos.c:1503
+#, fuzzy, c-format
+msgid "Partition %zu: does not end on cylinder boundary."
+msgstr "分割區 %d 並非終於磁柱邊界。\n"
+
+#: libfdisk/src/dos.c:1550
+#, fuzzy, c-format
+msgid "Partition %zu: bad start-of-data."
+msgstr "分割區結尾小於磁區 0"
+
+#: libfdisk/src/dos.c:1563
+#, fuzzy, c-format
+msgid "Partition %zu: overlaps partition %zu."
+msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
+
+#: libfdisk/src/dos.c:1591
+#, fuzzy, c-format
+msgid "Partition %zu: empty."
+msgstr "分割區 (a-%c)："
+
+#: libfdisk/src/dos.c:1596
+#, fuzzy, c-format
+msgid "Logical partition %zu: not entirely in partition %zu."
+msgstr "邏輯分割區 %d 並非完整處於分割區 %d 中\n"
+
+#: libfdisk/src/dos.c:1604
+#, fuzzy, c-format
+msgid "Total allocated sectors %llu greater than the maximum %llu."
+msgstr "配置的磁區總計 %llu 大於最大值 %llu\n"
+
+#: libfdisk/src/dos.c:1607
+#, fuzzy, c-format
+msgid "Remaining %lld unallocated %ld-byte sectors."
+msgstr "其餘 %lld unallocated %ld-byte 磁區\n"
-#: hwclock/hwclock.c:1672
+#: libfdisk/src/dos.c:1666 libfdisk/src/dos.c:1681 libfdisk/src/dos.c:2133
#, fuzzy
-msgid "With --noadjfile, you must specify either --utc or --localtime"
-msgstr "%s：配合 --noadjfile 使用，您必須指定 --utc 或 --localtime 兩者之一\n"
+msgid "Extended partition already exists."
+msgstr "這個分割區已經存在。\n"
+
+#: libfdisk/src/dos.c:1696
+msgid "Extended partition does not exists. Failed to add logical partition."
+msgstr ""
-#: hwclock/hwclock.c:1685
+#: libfdisk/src/dos.c:1738
#, fuzzy
-msgid "No usable set-to time. Cannot set clock."
-msgstr "無可用的 set-to 時間。 無法設定時鐘。\n"
+msgid "The maximum number of partitions has been created."
+msgstr "已建立分割區的最大數量\n"
-#: hwclock/hwclock.c:1700
+#: libfdisk/src/dos.c:1751
#, fuzzy
-msgid "Sorry, only the superuser can change the Hardware Clock."
-msgstr "æ\8a±æ\89ï¼\8cå\8fªæ\9c\89系統管ç\90\86è\80\85å\8f¯ä»¥è®\8aæ\9b´ç¡¬é«\94æ\99\82é\90\98ã\80\82\n"
+msgid "All primary partitions are in use."
+msgstr "æ\89\80æ\9c\89主è¦\81å\88\86å\89²å\8d\80æ\98¯å\9c¨ä¸ä½¿ç\94¨\n"
-#: hwclock/hwclock.c:1704
+#: libfdisk/src/dos.c:1753 libfdisk/src/dos.c:1764
#, fuzzy
-msgid "Sorry, only the superuser can change the System Clock."
-msgstr "æ\8a±æ\89ï¼\8cå\8fªæ\9c\89系統管ç\90\86è\80\85å\8f¯ä»¥è®\8aæ\9b´ç³»çµ±æ\99\82é\90\98ã\80\82\n"
+msgid "All space for primary partitions is in use."
+msgstr "æ\89\80æ\9c\89主è¦\81å\88\86å\89²å\8d\80æ\98¯å\9c¨ä¸ä½¿ç\94¨\n"
-#: hwclock/hwclock.c:1708
+#. TRANSLATORS: Try to keep this within 80 characters.
+#: libfdisk/src/dos.c:1767
#, fuzzy
-msgid ""
-"Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
-msgstr "抱歉，只有系統管理者可以變更內核中的硬體時鐘時期。\n"
+msgid "To create more partitions, first replace a primary with an extended partition."
+msgstr ""
+"如果您要建立超過四分割區，您必須置換\n"
+"主要分割與進階分割先。\n"
-#: hwclock/hwclock.c:1731
+#: libfdisk/src/dos.c:1772
#, fuzzy
-msgid "Cannot access the Hardware Clock via any known method."
-msgstr "無法透過任何已知方法去存取硬體時鐘。\n"
+msgid "All logical partitions are in use. Adding a primary partition."
+msgstr "所有邏輯分割區都在使用中\n"
-#: hwclock/hwclock.c:1734
+#: libfdisk/src/dos.c:1794
#, fuzzy
-msgid ""
-"Use the --debug option to see the details of our search for an access method."
-msgstr "使用 --debug 選項以參看我們搜尋存取方法的細節。\n"
+msgid "Partition type"
+msgstr "分割區編號"
-#: hwclock/kd.c:49
+#: libfdisk/src/dos.c:1798
#, c-format
-msgid "Waiting in loop for time from KDGHWCLK to change\n"
-msgstr "循環等待自 KDGHWCLK 變更起的時間\n"
-
-#: hwclock/kd.c:52
-msgid "KDGHWCLK ioctl to read time failed"
-msgstr "KDGHWCLK ioctl 讀取時間失敗"
-
-#: hwclock/kd.c:74
-msgid "KDGHWCLK ioctl to read time failed in loop"
-msgstr "KDGHWCLK ioctl 讀取時間於循環中失敗"
+msgid "%u primary, %d extended, %u free"
+msgstr ""
-#: hwclock/kd.c:81 hwclock/rtc.c:235
+#: libfdisk/src/dos.c:1803
#, fuzzy
-msgid "Timed out waiting for time change."
-msgstr "等候時間變更已逾時。\n"
+msgid "primary"
+msgstr "主要的"
-#: hwclock/kd.c:100
-#, c-format
-msgid "ioctl() failed to read time from %s"
-msgstr "ioctl() 從 %s 讀取時間失敗"
+#: libfdisk/src/dos.c:1805
+#, fuzzy
+msgid "extended"
+msgstr "延伸"
-#: hwclock/kd.c:136
-msgid "ioctl KDSHWCLK failed"
-msgstr "ioctl KDSHWCLK 失敗"
+#: libfdisk/src/dos.c:1805
+#, fuzzy
+msgid "container for logical partitions"
+msgstr "壞的邏輯分割區"
-#: hwclock/kd.c:172
-msgid "Can't open /dev/tty1 or /dev/vc/1"
-msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
+#: libfdisk/src/dos.c:1807
+#, fuzzy
+msgid "logical"
+msgstr "邏輯的"
-#: hwclock/kd.c:176
-msgid "KDGHWCLK ioctl failed"
-msgstr "KDGHWCLK ioctl 失敗"
+#: libfdisk/src/dos.c:1807
+#, fuzzy
+msgid "numbered from 5"
+msgstr " l 邏輯的 (已編號從 5)"
-#: hwclock/rtc.c:161 hwclock/rtc.c:255
-#, c-format
-msgid "open() of %s failed"
-msgstr "%s 的 open() 失敗"
+#: libfdisk/src/dos.c:1846
+#, fuzzy, c-format
+msgid "Invalid partition type `%c'."
+msgstr "無效的分割區類型『%c』\n"
-#: hwclock/rtc.c:194
+#: libfdisk/src/dos.c:1864
#, fuzzy, c-format
-msgid "ioctl(%s) to %s to read the time failed"
-msgstr "%s 的 ioctl() 讀取時間失敗。\n"
+msgid "Cannot write sector %jd: seek failed"
+msgstr "無法寫入指令稿檔案"
-#: hwclock/rtc.c:216
-#, c-format
-msgid "Waiting in loop for time from %s to change\n"
-msgstr "循環等候自 %s 變更起的時間\n"
+#: libfdisk/src/dos.c:2024 libfdisk/src/gpt.c:1095
+#, fuzzy
+msgid "Disk identifier"
+msgstr "磁碟識別碼：0x%08x\n"
-#: hwclock/rtc.c:279
-#, c-format
-msgid "%s does not have interrupt functions. "
-msgstr "%s 沒有插斷函式。"
+#: libfdisk/src/dos.c:2138
+#, fuzzy
+msgid "Type 0 means free space to many systems. Having partitions of type 0 is probably unwise."
+msgstr ""
+"類型 0 對於許多系統而言表示剩餘空間\n"
+"(並不包括 Linux)。具有\n"
+"類型為 0 的分割區可能不太明智。您可以\n"
+"使用「d」命令來刪除分割區。\n"
-#: hwclock/rtc.c:291
-#, c-format
-msgid "read() to %s to wait for clock tick failed"
-msgstr "%s 的 read() 等候時鐘週期失敗"
+#: libfdisk/src/dos.c:2143
+msgid "Cannot change type of the extended partition which is already used by logical partitions. Delete logical partitions first."
+msgstr ""
-#: hwclock/rtc.c:316
-#, c-format
-msgid "select() to %s to wait for clock tick failed"
-msgstr "%s 的 select() 等候時鐘週期失敗"
+#: libfdisk/src/dos.c:2329 libfdisk/src/gpt.c:2914
+#, fuzzy
+msgid "Nothing to do. Ordering is correct already."
+msgstr ""
+"無事可做。順序已經是正確的。\n"
+"\n"
-#: hwclock/rtc.c:320
+#: libfdisk/src/dos.c:2384
#, fuzzy, c-format
-msgid "select() to %s to wait for clock tick timed out"
-msgstr "%s 的 select() 等候時鐘週期已逾時\n"
+msgid "Partition %zu: no data area."
+msgstr "分割區 %d 沒有資料區域\n"
-#: hwclock/rtc.c:330
-#, c-format
-msgid "ioctl() to %s to turn off update interrupts failed"
-msgstr "%s 的 ioctl() 關閉更新插斷失敗"
+#: libfdisk/src/dos.c:2417
+msgid "New beginning of data"
+msgstr "新的資料開始部分"
-#: hwclock/rtc.c:334
-#, c-format
-msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
-msgstr "%s 的 ioctl() 打開更新插斷意外地失敗"
+#: libfdisk/src/dos.c:2473
+#, fuzzy, c-format
+msgid "Partition %zu: is an extended partition."
+msgstr "警告：分割區 %d 是擴充分割區\n"
-#: hwclock/rtc.c:388
+#: libfdisk/src/dos.c:2479
#, fuzzy, c-format
-msgid "ioctl(%s) to %s to set the time failed."
-msgstr "%s 的 ioctl() 設定時間失敗。\n"
+msgid "The bootable flag on partition %zu is enabled now."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: hwclock/rtc.c:394
-#, c-format
-msgid "ioctl(%s) was successful.\n"
-msgstr "ioctl(%s) 原本成功。\n"
+#: libfdisk/src/dos.c:2480
+#, fuzzy, c-format
+msgid "The bootable flag on partition %zu is disabled now."
+msgstr "切換目前分割區的屬性旗標"
-#: hwclock/rtc.c:419
-#, c-format
-msgid "Open of %s failed"
-msgstr "開啟 %s 時失敗"
+#: libfdisk/src/dos.c:2493 libfdisk/src/gpt.c:3004 libfdisk/src/sgi.c:1153
+#: libfdisk/src/sun.c:1129
+msgid "Device"
+msgstr "所用裝置"
-#: hwclock/rtc.c:435 hwclock/rtc.c:482
-#, fuzzy, c-format
-msgid ""
-"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' "
-"device driver via the device special file %s. This file does not exist on "
-"this system."
-msgstr ""
-"要操控內核中的時期值，我們必須透過裝置特定檔案 %s 來存取 Linux 'rtc' 裝置驅動"
-"程式。這個檔案不存在於此系統。\n"
+#: libfdisk/src/dos.c:2494 libfdisk/src/sun.c:40
+msgid "Boot"
+msgstr "可開機"
-#: hwclock/rtc.c:440 hwclock/rtc.c:487
-#, c-format
-msgid "Unable to open %s"
-msgstr "無法開啟 %s"
+#: libfdisk/src/dos.c:2500 libfdisk/src/sgi.c:1159 libfdisk/src/sun.c:1135
+msgid "Id"
+msgstr ""
-#: hwclock/rtc.c:447
-#, c-format
-msgid "ioctl(RTC_EPOCH_READ) to %s failed"
-msgstr "%s 的 ioctl(RTC_EPOCH_READ) 失敗"
+#: libfdisk/src/dos.c:2504
+msgid "Start-C/H/S"
+msgstr ""
-#: hwclock/rtc.c:453
-#, c-format
-msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n"
-msgstr "我們已從具備 RTC_EPOCH_READ ioctl 的 %2$s 讀取了時期 %1$ld。\n"
+#: libfdisk/src/dos.c:2505
+msgid "End-C/H/S"
+msgstr ""
-#: hwclock/rtc.c:473
-#, fuzzy, c-format
-msgid "The epoch value may not be less than 1900. You requested %ld"
-msgstr "epoch 值不可以少於 1900。您要求的是 %ld\n"
+#: libfdisk/src/dos.c:2506 libfdisk/src/gpt.c:3014 libfdisk/src/sgi.c:1161
+msgid "Attrs"
+msgstr ""
-#: hwclock/rtc.c:492
-#, c-format
-msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n"
-msgstr "設定 epoch 到 %ld 以及 RTC_EPOCH_SET ioctl 到 %s。\n"
+#: libfdisk/src/gpt.c:529
+#, fuzzy
+msgid "failed to allocate GPT header"
+msgstr "配置迭代器時失敗"
-#: hwclock/rtc.c:498
-#, fuzzy, c-format
-msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
-msgstr "用於 %s 的內核裝置驅動程式沒有 RTC_EPOCH_SET ioctl。\n"
+#: libfdisk/src/gpt.c:612
+msgid "First LBA specified by script is out of range."
+msgstr ""
-#: hwclock/rtc.c:502
-#, c-format
-msgid "ioctl(RTC_EPOCH_SET) to %s failed"
-msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+#: libfdisk/src/gpt.c:624
+msgid "Last LBA specified by script is out of range."
+msgstr ""
-#: lib/path.c:58 lib/path.c:70
+#: libfdisk/src/gpt.c:766
#, c-format
-msgid "error: cannot open %s"
-msgstr "錯誤：無法開啟 %s"
-
-#: lib/path.c:174 sys-utils/lscpu.c:1112
-msgid "failed to callocate cpu set"
-msgstr "callocate cpu 集合時失敗"
+msgid "GPT PMBR size mismatch (%<PRIu64> != %<PRIu64>) will be corrected by write."
+msgstr ""
-#: lib/path.c:178
-#, fuzzy, c-format
-msgid "failed to parse CPU list %s"
-msgstr "剖析 CPU 遮罩 %s 時失敗"
+#: libfdisk/src/gpt.c:791
+#, fuzzy
+msgid "gpt: stat() failed"
+msgstr "%s：stat 失敗"
-#: lib/path.c:181
+#: libfdisk/src/gpt.c:801
#, c-format
-msgid "failed to parse CPU mask %s"
-msgstr "剖析 CPU 遮罩 %s 時失敗"
+msgid "gpt: cannot handle files with mode %o"
+msgstr ""
-#: login-utils/chfn.c:75 login-utils/chsh.c:63
-#, fuzzy, c-format
-msgid " %s [options] [username]\n"
+#: libfdisk/src/gpt.c:1065
+msgid "GPT Header"
msgstr ""
-"\n"
-"用法：%s [選項] 路徑名稱 [路徑名稱...]\n"
-#: login-utils/chfn.c:77
-msgid " -f, --full-name <full-name> real name\n"
+#: libfdisk/src/gpt.c:1070
+msgid "GPT Entries"
msgstr ""
-#: login-utils/chfn.c:78
-msgid " -o, --office <office> office number\n"
+#: libfdisk/src/gpt.c:1102
+#, fuzzy
+msgid "First LBA"
+msgstr "起初 %s"
+
+#: libfdisk/src/gpt.c:1107
+#, fuzzy
+msgid "Last LBA"
+msgstr " 最後一筆 %s"
+
+#. TRANSLATORS: The LBA (Logical Block Address) of the backup GPT header.
+#: libfdisk/src/gpt.c:1113
+msgid "Alternative LBA"
msgstr ""
-#: login-utils/chfn.c:79
+#. TRANSLATORS: The start of the array of partition entries.
+#: libfdisk/src/gpt.c:1119
#, fuzzy
-msgid " -p, --office-phone <phone> office phone number\n"
+msgid "Partition entries LBA"
+msgstr "分割區 (a-%c)："
+
+#: libfdisk/src/gpt.c:1124
+#, fuzzy
+msgid "Allocated partition entries"
+msgstr "已選分割區 %d\n"
+
+#: libfdisk/src/gpt.c:1466
+msgid "The backup GPT table is corrupt, but the primary appears OK, so that will be used."
msgstr ""
-"[ -p office-phone ]\n"
-"\t[ -h home-phone ] "
-#: login-utils/chfn.c:80
-msgid " -h, --home-phone <phone> home phone number\n"
+#: libfdisk/src/gpt.c:1476
+msgid "The primary GPT table is corrupt, but the backup appears OK, so that will be used."
msgstr ""
-#: login-utils/chfn.c:82 login-utils/chsh.c:68
-msgid " -u, --help display this help and exit\n"
+#: libfdisk/src/gpt.c:1489
+msgid "The backup GPT table is not on the end of the device. This problem will be corrected by write."
msgstr ""
-#: login-utils/chfn.c:83 login-utils/chsh.c:69
-#, fuzzy
-msgid " -v, --version output version information and exit\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: libfdisk/src/gpt.c:1671
+#, fuzzy, c-format
+msgid "unsupported GPT attribute bit '%s'"
+msgstr "不受支援的引數：%s"
-#: login-utils/chfn.c:119 login-utils/chsh.c:94
+#: libfdisk/src/gpt.c:1676
#, fuzzy, c-format
-msgid "you (user %d) don't exist."
-msgstr "%s：您 (使用者 %d) 不存在。\n"
+msgid "failed to parse GPT attribute string '%s'"
+msgstr "剖析清單『%s 時失敗』"
-#: login-utils/chfn.c:124 login-utils/chsh.c:99
+#: libfdisk/src/gpt.c:1776
#, fuzzy, c-format
-msgid "user \"%s\" does not exist."
-msgstr "%s：使用者「%s」不存在。\n"
+msgid "Partition UUID changed from %s to %s."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/chfn.c:129
+#: libfdisk/src/gpt.c:1785
#, fuzzy
-msgid "can only change local entries"
-msgstr "%s：只能變更本地項目；使用 yp%s 做為替代。\n"
+msgid "Failed to translate partition name, name not changed."
+msgstr "加入分割時失敗"
-#: login-utils/chfn.c:139
+#: libfdisk/src/gpt.c:1787
#, fuzzy, c-format
-msgid "%s is not authorized to change the finger info of %s"
-msgstr "%s: %s 並未被授權去變更 %s 的 finger 資訊\n"
-
-#: login-utils/chfn.c:141 login-utils/chsh.c:117
-msgid "Unknown user context"
-msgstr "不明的使用者相關環境"
+msgid "Partition name changed from '%s' to '%.*s'."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/chfn.c:147 login-utils/chsh.c:123
+#: libfdisk/src/gpt.c:1816
#, fuzzy
-msgid "can't set default context for /etc/passwd"
-msgstr "%s：無法設定 /etc/passwd 的預設相關環境"
+msgid "The start of the partition understeps FirstUsableLBA."
+msgstr ""
+"\n"
+"開機分割區不存在。\n"
-#: login-utils/chfn.c:157
-#, c-format
-msgid "Changing finger information for %s.\n"
-msgstr "修改 %s 的 finger 資訊。\n"
+#: libfdisk/src/gpt.c:1823
+#, fuzzy
+msgid "The end of the partition oversteps LastUsableLBA."
+msgstr "結束的分割在中磁區"
-#: login-utils/chfn.c:194
-#, c-format
-msgid "Finger information not changed.\n"
-msgstr "Finger 資訊沒有變更。\n"
+#: libfdisk/src/gpt.c:1986
+msgid "The device contains hybrid MBR -- writing GPT only."
+msgstr ""
-#: login-utils/chfn.c:250 login-utils/chfn.c:327
-msgid "Office"
-msgstr "辦公室"
+#: libfdisk/src/gpt.c:2022
+msgid "Disk does not contain a valid backup header."
+msgstr ""
-#: login-utils/chfn.c:254 login-utils/chfn.c:328
-msgid "Office Phone"
-msgstr "辦公室電話"
+#: libfdisk/src/gpt.c:2027
+msgid "Invalid primary header CRC checksum."
+msgstr ""
-#: login-utils/chfn.c:258 login-utils/chfn.c:329
-msgid "Home Phone"
-msgstr "住家電話"
+#: libfdisk/src/gpt.c:2031
+msgid "Invalid backup header CRC checksum."
+msgstr ""
-#: login-utils/chfn.c:349 login-utils/chsh.c:263
+#: libfdisk/src/gpt.c:2036
#, fuzzy
-msgid "Aborted."
+msgid "Invalid partition entry checksum."
+msgstr "無效的分割區類型『%c』\n"
+
+#: libfdisk/src/gpt.c:2041
+msgid "Invalid primary header LBA sanity checks."
msgstr ""
-"\n"
-"已中止。\n"
-#: login-utils/chfn.c:381
-#, fuzzy, c-format
-msgid "field %s is too long"
-msgstr "欄位太長。\n"
+#: libfdisk/src/gpt.c:2045
+msgid "Invalid backup header LBA sanity checks."
+msgstr ""
-#: login-utils/chfn.c:383
-#, fuzzy
-msgid "field is too long"
-msgstr "欄位太長。\n"
+#: libfdisk/src/gpt.c:2050
+msgid "MyLBA mismatch with real position at primary header."
+msgstr ""
+
+#: libfdisk/src/gpt.c:2054
+msgid "MyLBA mismatch with real position at backup header."
+msgstr ""
+
+#: libfdisk/src/gpt.c:2059
+msgid "Disk is too small to hold all data."
+msgstr ""
+
+#: libfdisk/src/gpt.c:2069
+msgid "Primary and backup header mismatch."
+msgstr ""
-#: login-utils/chfn.c:391
+#: libfdisk/src/gpt.c:2075
#, fuzzy, c-format
-msgid "%s: '%c' is not allowed"
-msgstr "%s：「%c」並不被允許。\n"
+msgid "Partition %u overlaps with partition %u."
+msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
-#: login-utils/chfn.c:393 login-utils/chsh.c:307
+#: libfdisk/src/gpt.c:2082
#, fuzzy, c-format
-msgid "'%c' is not allowed"
-msgstr "「%c」未被允許。\n"
+msgid "Partition %u is too big for the disk."
+msgstr "分割重疊在之上磁碟。\n"
-#: login-utils/chfn.c:399
+#: libfdisk/src/gpt.c:2089
#, fuzzy, c-format
-msgid "%s: control characters are not allowed"
-msgstr "%s：控制字元不被允許。\n"
+msgid "Partition %u ends before it starts."
+msgstr "分割區結尾小於磁區 0"
-#: login-utils/chfn.c:402 login-utils/chsh.c:311
-#, fuzzy
-msgid "control characters are not allowed"
-msgstr "控制字元不被允許。\n"
+#: libfdisk/src/gpt.c:2098
+msgid "No errors detected."
+msgstr ""
-#: login-utils/chfn.c:479
-#, c-format
-msgid "Finger information *NOT* changed. Try again later.\n"
-msgstr "Finger 資訊 *未被* 變更。請稍後再嘗試。\n"
+#: libfdisk/src/gpt.c:2099
+#, fuzzy, c-format
+msgid "Header version: %s"
+msgstr "剖析錯誤：%s"
-#: login-utils/chfn.c:482
-#, c-format
-msgid "Finger information changed.\n"
-msgstr "Finger 資訊已變更。\n"
+#: libfdisk/src/gpt.c:2100
+#, fuzzy, c-format
+msgid "Using %zu out of %zu partitions."
+msgstr "怪異的，只有 %d 分割區定義。"
-#: login-utils/chsh.c:65
-#, fuzzy
-msgid " -s, --shell <shell> specify login shell\n"
-msgstr " -s, --shell=命令殼 設定命令殼引號慣例\n"
+#: libfdisk/src/gpt.c:2110
+#, fuzzy, c-format
+msgid "A total of %ju free sectors is available in %u segment."
+msgid_plural "A total of %ju free sectors is available in %u segments (the largest is %s)."
+msgstr[0] "沒有可用的磁區存在\n"
-#: login-utils/chsh.c:66
-msgid " -l, --list-shells print list of shells and exit\n"
-msgstr ""
+#: libfdisk/src/gpt.c:2118
+#, c-format
+msgid "%d error detected."
+msgid_plural "%d errors detected."
+msgstr[0] ""
-#: login-utils/chsh.c:104
+#: libfdisk/src/gpt.c:2197
#, fuzzy
-msgid "can only change local entries."
-msgstr "%s：只能變更本地項目；使用 yp%s 做為替代。\n"
+msgid "All partitions are already in use."
+msgstr "這個分割區已在使用中"
-#: login-utils/chsh.c:116
+#: libfdisk/src/gpt.c:2254 libfdisk/src/gpt.c:2281
#, fuzzy, c-format
-msgid "%s is not authorized to change the shell of %s"
-msgstr "%s: %s 未被授權去變更 %s 的命令殼\n"
+msgid "Sector %ju already used."
+msgstr "磁區 %llu 已經配置\n"
-#: login-utils/chsh.c:135
-#, fuzzy
-msgid ""
-"running UID doesn't match UID of user we're altering, shell change denied"
-msgstr "%s：執行中的 UID 不符合我們正在變更中的使用者 UID，命令殼的變更被拒\n"
+#: libfdisk/src/gpt.c:2347
+#, fuzzy, c-format
+msgid "Could not create partition %zu"
+msgstr "不要新增一個分割區"
-#: login-utils/chsh.c:140
-#, fuzzy
-msgid "your shell is not in /etc/shells, shell change denied"
-msgstr "%s：您的命令殼並不包含於 /etc/shells，命令殼的變更被拒\n"
+#: libfdisk/src/gpt.c:2354
+#, c-format
+msgid "The last usable GPT sector is %ju, but %ju is requested."
+msgstr ""
-#: login-utils/chsh.c:146
+#: libfdisk/src/gpt.c:2361
#, c-format
-msgid "Changing shell for %s.\n"
-msgstr "變更 %s 的 shell。\n"
+msgid "The first usable GPT sector is %ju, but %ju is requested."
+msgstr ""
-#: login-utils/chsh.c:180
-msgid "New shell"
-msgstr "新命令殼"
+#: libfdisk/src/gpt.c:2500
+#, fuzzy, c-format
+msgid "Created a new GPT disklabel (GUID: %s)."
+msgstr "建立新的清空 Sun disklabel"
-#: login-utils/chsh.c:189
-#, fuzzy
-msgid "Shell not changed."
-msgstr "命令殼未變更。\n"
+#: libfdisk/src/gpt.c:2518
+msgid "Enter new disk UUID (in 8-4-4-4-12 format)"
+msgstr ""
-#: login-utils/chsh.c:192
+#: libfdisk/src/gpt.c:2525
#, fuzzy
-msgid ""
-"setpwnam failed\n"
-"Shell *NOT* changed. Try again later."
-msgstr "命令殼 *未* 變更。稍後再試一次。\n"
+msgid "Failed to parse your UUID."
+msgstr "剖析 %s 時失敗"
-#: login-utils/chsh.c:196
-#, c-format
-msgid "Shell changed.\n"
-msgstr "shell 已變更。\n"
+#: libfdisk/src/gpt.c:2539
+#, fuzzy, c-format
+msgid "Disk identifier changed from %s to %s."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/chsh.c:292
+#: libfdisk/src/gpt.c:2559
#, fuzzy
-msgid "shell must be a full path name"
-msgstr "%s：命令殼必須是路徑完整的名稱。\n"
+msgid "Not enough space for new partition table!"
+msgstr "沒有可用的磁區存在\n"
-#: login-utils/chsh.c:296
+#: libfdisk/src/gpt.c:2570
#, fuzzy, c-format
-msgid "\"%s\" does not exist"
-msgstr "%s：「%s」不存在。\n"
+msgid "Partition #%zu out of range (minimal start is %<PRIu64> sectors)"
+msgstr "分割區 %s 具有無效的開始磁區 0。\n"
-#: login-utils/chsh.c:300
-#, fuzzy, c-format
-msgid "\"%s\" is not executable"
-msgstr "%s：「%s」並非可執行。\n"
+#: libfdisk/src/gpt.c:2575
+#, c-format
+msgid "Partition #%zu out of range (maximal end is %<PRIu64> sectors)"
+msgstr ""
-#: login-utils/chsh.c:319
-#, fuzzy, c-format
-msgid "Warning: \"%s\" is not listed in /etc/shells."
-msgstr "警告：「%s」並未表列於 /etc/shells 之中。\n"
+#: libfdisk/src/gpt.c:2621
+#, fuzzy
+msgid "The partition entry size is zero."
+msgstr ""
+"\n"
+"開機分割區不存在。\n"
-#: login-utils/chsh.c:323 login-utils/chsh.c:329
+#: libfdisk/src/gpt.c:2623
#, fuzzy, c-format
-msgid ""
-"\"%s\" is not listed in /etc/shells.\n"
-"Use %s -l to see list."
-msgstr "%s：「%s」並未表列於 /etc/shells 之中。\n"
+msgid "The number of the partition has to be smaller than %zu."
+msgstr "已建立分割區的最大數量\n"
-#: login-utils/chsh.c:353
+#: libfdisk/src/gpt.c:2646
#, fuzzy
-msgid "No known shells."
-msgstr "無已知命令殼。\n"
-
-#: login-utils/islocal.c:86
-#, c-format
-msgid "Failed to open %s for reading, exiting."
-msgstr "開啟 %s 用於讀取時失敗，離開。"
+msgid "Cannot allocate memory!"
+msgstr "配置記憶體時失敗：%m"
-#: login-utils/last.c:148
-msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
-msgstr "用法：last [-#] [-f file] [-t tty] [-h hostname] [user...]\n"
+#: libfdisk/src/gpt.c:2676
+#, fuzzy, c-format
+msgid "Partition table length changed from %<PRIu32> to %<PRIu64>."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/last.c:245
+#: libfdisk/src/gpt.c:2785
#, fuzzy, c-format
-msgid "%s: mmap failed"
-msgstr "%s：swapon 失敗"
+msgid "The attributes on partition %zu changed to 0x%016<PRIx64>."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
+
+#: libfdisk/src/gpt.c:2835
+msgid "Enter GUID specific bit"
+msgstr ""
-#: login-utils/last.c:305
-msgid " still logged in"
-msgstr " 仍然在登入狀態"
+#: libfdisk/src/gpt.c:2850
+#, fuzzy, c-format
+msgid "failed to toggle unsupported bit %lu"
+msgstr "掛載移動 %s 到 %s 時失敗"
-#: login-utils/last.c:327
+#: libfdisk/src/gpt.c:2863
#, c-format
-msgid ""
-"\n"
-"wtmp begins %s"
+msgid "The GUID specific bit %d on partition %zu is enabled now."
msgstr ""
-"\n"
-"wtmp 開始 %s"
-
-#: login-utils/last.c:424
-#, fuzzy
-msgid "gethostname failed"
-msgstr "錯誤：uname 失敗"
-#: login-utils/last.c:470
+#: libfdisk/src/gpt.c:2864
#, c-format
-msgid ""
-"\n"
-"interrupted %10.10s %5.5s \n"
+msgid "The GUID specific bit %d on partition %zu is disabled now."
msgstr ""
-"\n"
-"發生插斷 %10.10s %5.5s\n"
-#. TRANSLATORS: The standard value for %d is 60.
-#: login-utils/login.c:157
+#: libfdisk/src/gpt.c:2868
#, fuzzy, c-format
-msgid "timed out after %d seconds"
-msgstr "%d 秒之後登入將逾時\n"
+msgid "The %s flag on partition %zu is enabled now."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: login-utils/login.c:265
+#: libfdisk/src/gpt.c:2869
#, fuzzy, c-format
-msgid "FATAL: can't reopen tty: %m"
-msgstr "嚴重：無法重新開啟 tty：%s"
+msgid "The %s flag on partition %zu is disabled now."
+msgstr "這個分割區無法使用"
-#: login-utils/login.c:271
-#, c-format
-msgid "FATAL: %s is not a terminal"
-msgstr "嚴重：%s 並非終端機"
+#: libfdisk/src/gpt.c:3011
+#, fuzzy
+msgid "Type-UUID"
+msgstr "類型"
-#: login-utils/login.c:289
-#, fuzzy, c-format
-msgid "chown (%s, %lu, %lu) failed: %m"
-msgstr "chown 失敗：%s"
+#: libfdisk/src/gpt.c:3012
+msgid "UUID"
+msgstr ""
-#: login-utils/login.c:293
-#, fuzzy, c-format
-msgid "chmod (%s, %u) failed: %m"
-msgstr "/dev：chdir() 失敗：%m"
+#: libfdisk/src/gpt.c:3013 login-utils/chfn.c:156 login-utils/chfn.c:158
+#: login-utils/chfn.c:323
+msgid "Name"
+msgstr "名稱"
-#: login-utils/login.c:358
-msgid "FATAL: bad tty"
-msgstr "嚴重：不當的 tty"
+#: libfdisk/src/partition.c:836
+#, fuzzy
+msgid "Free space"
+msgstr "剩餘空間"
-#: login-utils/login.c:386
-#, c-format
-msgid "FATAL: %s: change permissions failed: %m"
-msgstr ""
+#: libfdisk/src/partition.c:1260
+#, fuzzy, c-format
+msgid "Failed to resize partition #%zu."
+msgstr "調整大小分割時失敗"
-#: login-utils/login.c:520
-#, c-format
-msgid "Last login: %.*s "
-msgstr "上次登入：%.*s "
+#: libfdisk/src/parttype.c:239 misc-utils/findmnt.c:655
+#: misc-utils/uuidparse.c:199 misc-utils/uuidparse.c:217 schedutils/chrt.c:205
+#: schedutils/ionice.c:79 sys-utils/hwclock.c:274
+msgid "unknown"
+msgstr "不明的"
-#: login-utils/login.c:522
-#, c-format
-msgid "from %.*s\n"
-msgstr "從 %.*s\n"
+#: libfdisk/src/sgi.c:46
+msgid "SGI volhdr"
+msgstr "SGI volhdr"
-#: login-utils/login.c:525
-#, c-format
-msgid "on %.*s\n"
-msgstr "於 %.*s\n"
+#: libfdisk/src/sgi.c:47
+msgid "SGI trkrepl"
+msgstr "SGI trkrepl"
-#: login-utils/login.c:542
-#, fuzzy
-msgid "write lastlog failed"
-msgstr "寫入標準輸出時失敗"
+#: libfdisk/src/sgi.c:48
+msgid "SGI secrepl"
+msgstr "SGI secrepl"
-#: login-utils/login.c:627
-#, c-format
-msgid "DIALUP AT %s BY %s"
-msgstr "由 %2$s 於 %1$s 撥號進入"
+#: libfdisk/src/sgi.c:49
+msgid "SGI raw"
+msgstr "SGI raw"
-#: login-utils/login.c:632
-#, c-format
-msgid "ROOT LOGIN ON %s FROM %s"
-msgstr "從 %2$s 於 %1$s 登入為系統管理員"
+#: libfdisk/src/sgi.c:50
+msgid "SGI bsd"
+msgstr "SGI bsd"
-#: login-utils/login.c:635
-#, c-format
-msgid "ROOT LOGIN ON %s"
-msgstr "系統管理員於 %s 登入"
+#: libfdisk/src/sgi.c:51
+msgid "SGI sysv"
+msgstr "SGI sysv"
-#: login-utils/login.c:638
-#, c-format
-msgid "LOGIN ON %s BY %s FROM %s"
-msgstr "由 %2$s 從 %3$s 於 %1$s 登入"
+#: libfdisk/src/sgi.c:52
+msgid "SGI volume"
+msgstr "SGI volume"
-#: login-utils/login.c:641
-#, c-format
-msgid "LOGIN ON %s BY %s"
-msgstr "由 %2$s 於 %1$s 登入"
+#: libfdisk/src/sgi.c:53
+msgid "SGI efs"
+msgstr "SGI efs"
-#: login-utils/login.c:702
-msgid "login: "
-msgstr "登入："
+#: libfdisk/src/sgi.c:54
+msgid "SGI lvol"
+msgstr "SGI lvol"
-#: login-utils/login.c:728
-#, fuzzy, c-format
-msgid "PAM failure, aborting: %s"
-msgstr "%s：PAM 失敗，放棄：%s\n"
+#: libfdisk/src/sgi.c:55
+msgid "SGI rlvol"
+msgstr "SGI rlvol"
-#: login-utils/login.c:729
-#, c-format
-msgid "Couldn't initialize PAM: %s"
-msgstr "無法初始化 PAM：%s"
+#: libfdisk/src/sgi.c:56
+msgid "SGI xfs"
+msgstr "SGI xfs"
-#: login-utils/login.c:800
-#, c-format
-msgid "FAILED LOGIN %d FROM %s FOR %s, %s"
-msgstr "失敗的登入 %d 自 %s 用於 %s, %s"
+#: libfdisk/src/sgi.c:57
+msgid "SGI xfslog"
+msgstr "SGI xfslog"
-#: login-utils/login.c:808
-#, c-format
-msgid ""
-"Login incorrect\n"
-"\n"
-msgstr ""
-"登入不正確\n"
-"\n"
+#: libfdisk/src/sgi.c:58
+msgid "SGI xlv"
+msgstr "SGI xlv"
-#: login-utils/login.c:823
-#, c-format
-msgid "TOO MANY LOGIN TRIES (%d) FROM %s FOR %s, %s"
-msgstr "太多登入嘗試 (%d) 自 %s 用於 %s, %s"
+#: libfdisk/src/sgi.c:59
+msgid "SGI xvm"
+msgstr "SGI xvm"
-#: login-utils/login.c:829
-#, c-format
-msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
-msgstr "失敗的登入執行階段自 %s 用於 %s, %s"
+#: libfdisk/src/sgi.c:61 libfdisk/src/sun.c:52
+msgid "Linux native"
+msgstr "Linux native"
-#: login-utils/login.c:837
-#, c-format
-msgid ""
-"\n"
-"Login incorrect\n"
+#: libfdisk/src/sgi.c:158
+msgid "SGI info created on second sector."
msgstr ""
-"\n"
-"登入錯誤\n"
-#: login-utils/login.c:865 login-utils/login.c:1319 login-utils/login.c:1343
+#: libfdisk/src/sgi.c:258
#, fuzzy
-msgid ""
-"\n"
-"Session setup problem, abort."
-msgstr ""
-"\n"
-"執行階段設定發生問題，放棄。\n"
+msgid "Detected an SGI disklabel with wrong checksum."
+msgstr "偵測到 sgi 磁碟標籤與錯誤的總和檢查碼。\n"
-#: login-utils/login.c:866
-#, c-format
-msgid "NULL user name in %s:%d. Abort."
-msgstr "å\9c¨ %s:%d ä¸å\8c\85å\90«ç©ºä½¿ç\94¨è\80\85å\90\8d稱ï¼\8cæ\94¾æ£\84ã\80\82"
+#: libfdisk/src/sgi.c:281 libfdisk/src/sun.c:793
+#, fuzzy
+msgid "Physical cylinders"
+msgstr "實é«\94ç£\81æ\9f±æ\95¸é\87\8f"
-#: login-utils/login.c:1068 login-utils/vipw.c:232 sys-utils/flock.c:306
-#: sys-utils/swapon.c:274 term-utils/script.c:263 term-utils/script.c:273
-msgid "fork failed"
-msgstr "衍生執行時失敗"
+#: libfdisk/src/sgi.c:286 libfdisk/src/sun.c:798
+#, fuzzy
+msgid "Extra sects/cyl"
+msgstr "每磁柱的額外磁區"
-#: login-utils/login.c:1120
-#, c-format
-msgid "TIOCSCTTY failed: %m"
-msgstr "TIOCSCTTY 失敗：%m"
+#: libfdisk/src/sgi.c:296
+#, fuzzy
+msgid "Bootfile"
+msgstr "檔案 %s"
-#: login-utils/login.c:1263
-#, c-format
-msgid "login: -h for super-user only.\n"
-msgstr "login：-h 只提供系統管理者使用。\n"
+#: libfdisk/src/sgi.c:394
+#, fuzzy
+msgid "Invalid bootfile! The bootfile must be an absolute non-zero pathname, e.g. \"/unix\" or \"/unix.save\"."
+msgstr ""
+"\n"
+"無效的開機檔案！\n"
+"\t開機檔案名稱必須是絕對且非零路徑，\n"
+"\t例如「/unix」或「/unix.save」。\n"
-#: login-utils/login.c:1278
+#: libfdisk/src/sgi.c:400
#, fuzzy, c-format
-msgid "usage: login [ -p ] [ -h host ] [ -H ] [ -f username | username ]\n"
-msgstr "用法：last [-#] [-f file] [-t tty] [-h hostname] [user...]\n"
-
-#: login-utils/login.c:1320
-#, c-format
-msgid "Invalid user name \"%s\" in %s:%d. Abort."
-msgstr "無效的使用者名稱「%s」於 %s:%d，放棄。"
+msgid "Name of bootfile is too long: %zu byte maximum."
+msgid_plural "Name of bootfile is too long: %zu bytes maximum."
+msgstr[0] ""
+"\n"
+"\t開機檔案的名稱太長：最大為 16 位元組。\n"
-#: login-utils/login.c:1342
-#, fuzzy, c-format
-msgid "groups initialization failed: %m"
-msgstr "錯誤：%s：試探初始化時失敗"
+#: libfdisk/src/sgi.c:407
+#, fuzzy
+msgid "Bootfile must have a fully qualified pathname."
+msgstr ""
+"\n"
+"\t開機檔案必須有完全合法的路徑名稱。\n"
-#: login-utils/login.c:1367
+#: libfdisk/src/sgi.c:413
#, fuzzy
-msgid "setgid() failed"
-msgstr "setuid() 失敗"
+msgid "Be aware that the bootfile is not checked for existence. SGI's default is \"/unix\", and for backup \"/unix.save\"."
+msgstr ""
+"\n"
+"\t要知道，開機檔案並未檢查是否存在。\n"
+"\tSGI 預設為「/unix」和用於備份的「/unix.save」。\n"
-#: login-utils/login.c:1397
-#, c-format
-msgid "You have new mail.\n"
-msgstr "您有新郵件。\n"
+#: libfdisk/src/sgi.c:438
+#, fuzzy, c-format
+msgid "The current boot file is: %s"
+msgstr ""
+"\n"
+"目前的啟動檔案為：%s\n"
-#: login-utils/login.c:1399
-#, c-format
-msgid "You have mail.\n"
-msgstr "您有郵件。\n"
+#: libfdisk/src/sgi.c:440
+#, fuzzy
+msgid "Enter of the new boot file"
+msgstr "請輸入新的啟動檔案名稱："
-#: login-utils/login.c:1413
-msgid "setuid() failed"
-msgstr "setuid() 失敗"
+#: libfdisk/src/sgi.c:445
+#, fuzzy
+msgid "Boot file is unchanged."
+msgstr "啟動檔案未變更\n"
-#: login-utils/login.c:1419
+#: libfdisk/src/sgi.c:456
#, fuzzy, c-format
-msgid "%s: change directory failed"
-msgstr "%s：取得大小時失敗"
+msgid "Bootfile has been changed to \"%s\"."
+msgstr ""
+"\n"
+"\t開機檔案已變更為「%s」。\n"
-#: login-utils/login.c:1426
-#, c-format
-msgid "Logging in with home = \"/\".\n"
-msgstr "登入時個人資料夾=「/」。\n"
+#: libfdisk/src/sgi.c:595
+#, fuzzy
+msgid "More than one entire disk entry present."
+msgstr "存在多於一個完整磁碟項目。\n"
-#: login-utils/login.c:1455
+#: libfdisk/src/sgi.c:602 libfdisk/src/sun.c:467
#, fuzzy
-msgid "couldn't exec shell script"
-msgstr "login：無法執行命令稿：%s。\n"
+msgid "No partitions defined."
+msgstr "無已定義分割區\n"
-#: login-utils/login.c:1457
+#: libfdisk/src/sgi.c:612
#, fuzzy
-msgid "no shell"
-msgstr "無命令殼"
+msgid "IRIX likes it when partition 11 covers the entire disk."
+msgstr "IRIX 偏好分割區 11 涵蓋整個磁碟。\n"
-#: login-utils/logindefs.c:192
+#: libfdisk/src/sgi.c:616
#, fuzzy, c-format
-msgid "%s: %s contains invalid numerical value: %s"
-msgstr "無效的間隔值：%s\n"
+msgid "The entire disk partition should start at block 0, not at block %d."
+msgstr ""
+"整個磁碟分割區應該始於區塊 0，\n"
+"而非磁碟區塊 %d。\n"
-#: login-utils/newgrp.c:91 sys-utils/losetup.c:350 sys-utils/mount.c:116
-msgid "Password: "
-msgstr "密碼："
+#: libfdisk/src/sgi.c:627
+#, fuzzy
+msgid "Partition 11 should cover the entire disk."
+msgstr "分割 11 應該封套整個磁碟。\n"
-#: login-utils/newgrp.c:103
+#: libfdisk/src/sgi.c:651
#, fuzzy, c-format
-msgid " %s <group>\n"
-msgstr "newgrp：無此群組。"
+msgid "Partitions %d and %d overlap by %d sector."
+msgid_plural "Partitions %d and %d overlap by %d sectors."
+msgstr[0] "分割區 %d 與 %d 有 %d 塊磁區相互重疊。\n"
+
+#: libfdisk/src/sgi.c:662 libfdisk/src/sgi.c:684
+#, fuzzy, c-format
+msgid "Unused gap of %8u sector: sector %8u"
+msgid_plural "Unused gap of %8u sectors: sectors %8u-%u"
+msgstr[0] "%8u 塊磁區的未使用間隙 - 磁區 %8u-%u\n"
-#: login-utils/newgrp.c:139
+#: libfdisk/src/sgi.c:697
#, fuzzy
-msgid "who are you?"
-msgstr "newgrp：您是哪位？"
+msgid "The boot partition does not exist."
+msgstr ""
+"\n"
+"開機分割區不存在。\n"
-#: login-utils/newgrp.c:146 login-utils/newgrp.c:158
+#: libfdisk/src/sgi.c:701
#, fuzzy
-msgid "setgid failed"
-msgstr "setuid() 失敗"
+msgid "The swap partition does not exist."
+msgstr ""
+"\n"
+"交換分割區不存在。\n"
-#: login-utils/newgrp.c:151 login-utils/newgrp.c:154
+#: libfdisk/src/sgi.c:705
#, fuzzy
-msgid "no such group"
-msgstr "newgrp：無此群組。"
+msgid "The swap partition has no swap type."
+msgstr ""
+"\n"
+"交換分割區不具有交換類型。\n"
-#: login-utils/newgrp.c:160 sys-utils/mount.c:387
+#: libfdisk/src/sgi.c:708
#, fuzzy
-msgid "permission denied"
-msgstr "mount：權限被拒"
+msgid "You have chosen an unusual bootfile name."
+msgstr "\t您選擇了一個不尋常的啟動檔案名稱。\n"
-#: login-utils/newgrp.c:165
+#: libfdisk/src/sgi.c:758
#, fuzzy
-msgid "setuid failed"
-msgstr "setuid() 失敗"
+msgid "Partition overlap on the disk."
+msgstr "分割重疊在之上磁碟。\n"
-#: login-utils/newgrp.c:170 sys-utils/unshare.c:134
-#, c-format
-msgid "exec %s failed"
-msgstr "執行 %s 時失敗"
+#: libfdisk/src/sgi.c:843
+#, fuzzy
+msgid "Attempting to generate entire disk entry automatically."
+msgstr "試圖自動產生整個磁碟項目。\n"
-#: login-utils/vipw.c:145
+#: libfdisk/src/sgi.c:848
#, fuzzy
-msgid "cannot lock password file"
-msgstr "無法設定使用者識別號"
+msgid "The entire disk is already covered with partitions."
+msgstr "整個磁碟已經被分割區所覆蓋。\n"
-#: login-utils/vipw.c:147
+#: libfdisk/src/sgi.c:852
#, fuzzy
-msgid "cannot lock group file"
-msgstr "無法設定群組識別號"
+msgid "You got a partition overlap on the disk. Fix it first!"
+msgstr "您的磁碟上有重疊的分割區，請先修正它！\n"
-#: login-utils/vipw.c:159
-#, fuzzy, c-format
-msgid "the %s file is busy (%s present)"
-msgstr "%s: %s 檔案忙碌中 (目前 %s)\n"
+#: libfdisk/src/sgi.c:874 libfdisk/src/sun.c:563
+#, c-format
+msgid "First %s"
+msgstr "起初 %s"
-#: login-utils/vipw.c:162
-#, fuzzy, c-format
-msgid "can't link %s"
-msgstr "%s：無法鏈結 %s: %s\n"
+#: libfdisk/src/sgi.c:898 libfdisk/src/sgi.c:949
+#, fuzzy
+msgid "It is highly recommended that the eleventh partition covers the entire disk and is of type 'SGI volume'."
+msgstr ""
+"強烈建議第十一塊分割區\n"
+"覆蓋整個磁碟並且為「SGI 卷冊」類型\n"
-#: login-utils/vipw.c:187
+#: libfdisk/src/sgi.c:913
#, fuzzy, c-format
-msgid "%s: create a link to %s failed"
-msgstr "%s：重新命名 %s 為 %s 時失敗：%s\n"
+msgid "Last %s or +%s or +size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: login-utils/vipw.c:194
+#: libfdisk/src/sgi.c:985 libfdisk/src/sun.c:248
#, fuzzy, c-format
-msgid "Can't get context for %s"
-msgstr "%s：無法取得 %s 的上下關係"
+msgid "BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu. This value may be truncated for devices > 33.8 GB."
+msgstr ""
+"警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
+"這個值也許會被截斷用於裝置>33.8 GB。\n"
-#: login-utils/vipw.c:200
-#, fuzzy, c-format
-msgid "Can't set context for %s"
-msgstr "%s：無法設定 %s 的上下關係"
+#: libfdisk/src/sgi.c:1051
+#, fuzzy
+msgid "Created a new SGI disklabel."
+msgstr "建立新的清空 Sun disklabel"
-#: login-utils/vipw.c:267
-#, fuzzy, c-format
-msgid "%s unchanged"
-msgstr "%s: %s 未變更\n"
+#: libfdisk/src/sgi.c:1070
+#, fuzzy
+msgid "Sorry, only for non-empty partitions you can change the tag."
+msgstr "抱歉，只有用於非空分割區您可以變更標籤。\n"
-#: login-utils/vipw.c:287
+#: libfdisk/src/sgi.c:1076
#, fuzzy
-msgid "no changes made"
-msgstr "%s：未造成任何變更\n"
+msgid "Consider leaving partition 9 as volume header (0), and partition 11 as entire volume (6), as IRIX expects it."
+msgstr ""
+"考慮保留分割區 9 為卷冊標頭 (0)，\n"
+"以及分割區 11 為整個卷冊 (6)，如同 IRIX 所預期。\n"
+"\n"
-#: login-utils/vipw.c:339
-#, c-format
-msgid "You are using shadow groups on this system.\n"
-msgstr "您正在這個系統中使用陰影群組。\n"
+#: libfdisk/src/sgi.c:1085
+#, fuzzy
+msgid "It is highly recommended that the partition at offset 0 is of type \"SGI volhdr\", the IRIX system will rely on it to retrieve from its directory standalone tools like sash and fx. Only the \"SGI volume\" entire disk section may violate this. Are you sure about tagging this partition differently?"
+msgstr ""
+"強烈建議位於偏移 0 的分割區\n"
+"類型為「SGI volhdr」，IRIX 系統將會依靠它以\n"
+"取回它的目錄獨立工具，諸如 sash 和 fx。\n"
+"只有「SGI 卷冊」整個磁碟區段的話，也許會對此有所妨害。\n"
+"如果您確定將這個分割區貼上不同的標籤，就輸入 YES。\n"
-#: login-utils/vipw.c:340
-#, c-format
-msgid "You are using shadow passwords on this system.\n"
-msgstr "您正在這個系統中使用陰影密碼。\n"
+#: libfdisk/src/sun.c:39
+msgid "Unassigned"
+msgstr "未指定"
-#: login-utils/vipw.c:341
-#, c-format
-msgid "Would you like to edit %s now [y/n]? "
-msgstr "您現在想要編輯 %s 嗎[y/n]？"
+#: libfdisk/src/sun.c:41
+msgid "SunOS root"
+msgstr "SunOS 根分割區"
-#: misc-utils/cal.c:369
-#, fuzzy
-msgid "illegal day value"
-msgstr "磁頭數值不合法"
+#: libfdisk/src/sun.c:42
+msgid "SunOS swap"
+msgstr "SunOS 交換分割區"
-#: misc-utils/cal.c:371 misc-utils/cal.c:385
-#, c-format
-msgid "illegal day value: use 1-%d"
-msgstr "不合法的日號：使用 1-%d"
+#: libfdisk/src/sun.c:43
+msgid "SunOS usr"
+msgstr "SunOS usr 分割區"
-#: misc-utils/cal.c:374 misc-utils/cal.c:376
-msgid "illegal month value: use 1-12"
-msgstr "不合法的月份：使用 1-12"
+#: libfdisk/src/sun.c:44
+msgid "Whole disk"
+msgstr "整顆磁碟"
-#: misc-utils/cal.c:379 misc-utils/cal.c:381
-msgid "illegal year value: use 1-9999"
-msgstr "不合法的年份：使用 1-9999"
+#: libfdisk/src/sun.c:45
+msgid "SunOS stand"
+msgstr "SunOS stand 分割區"
-#: misc-utils/cal.c:469
-#, c-format
-msgid "%s %d"
-msgstr "%s %d"
+#: libfdisk/src/sun.c:46
+msgid "SunOS var"
+msgstr "SunOS var 分割區"
-#: misc-utils/cal.c:784
-#, fuzzy, c-format
-msgid " %s [options] [[[day] month] year]\n"
-msgstr "用法：cal [-13smjyV] [[[日] 月] 年]\n"
+#: libfdisk/src/sun.c:47
+msgid "SunOS home"
+msgstr "SunOS home 分割區"
-#: misc-utils/cal.c:788
-msgid ""
-" -1, --one show only current month (default)\n"
-" -3, --three show previous, current and next month\n"
-" -s, --sunday Sunday as first day of week\n"
-" -m, --monday Monday as first day of week\n"
-" -j, --julian output Julian dates\n"
-" -y, --year show whole current year\n"
-" -V, --version display version information and exit\n"
-" -h, --help display this help text and exit\n"
-"\n"
-msgstr ""
+#: libfdisk/src/sun.c:48
+msgid "SunOS alt sectors"
+msgstr "SunOS alt 磁區"
-#: misc-utils/ddate.c:205
-#, c-format
-msgid "usage: %s [+format] [day month year]\n"
-msgstr "用法：%s [+format] [day month year]\n"
+#: libfdisk/src/sun.c:49
+msgid "SunOS cachefs"
+msgstr "SunOS 快取檔案系統"
-#: misc-utils/ddate.c:252
-msgid "St. Tib's Day"
-msgstr "St. Tib's 日"
+#: libfdisk/src/sun.c:50
+msgid "SunOS reserved"
+msgstr "SunOS 保留區"
-#: misc-utils/findfs.c:24
+#: libfdisk/src/sun.c:86
#, c-format
-msgid "Usage: %s LABEL=<label>|UUID=<uuid>\n"
-msgstr "用法：%s LABEL=<label>|UUID=<uuid>\n"
+msgid "%#zu: start cylinder overflows Sun label limits"
+msgstr ""
-#: misc-utils/findfs.c:55 misc-utils/logger.c:94
+#: libfdisk/src/sun.c:89
#, c-format
-msgid "unable to resolve '%s'"
-msgstr "無法解決「%s」"
+msgid "%#zu: number of sectors overflow Sun label limits"
+msgstr ""
-#: misc-utils/findmnt.c:89
+#: libfdisk/src/sun.c:136
#, fuzzy
-msgid "source device"
-msgstr "區塊裝置 "
-
-#: misc-utils/findmnt.c:90
-msgid "mountpoint"
+msgid "Detected sun disklabel with wrong checksum. Probably you'll have to set all the values, e.g. heads, sectors, cylinders and partitions or force a fresh label (s command in main menu)"
msgstr ""
+"偵測到具有錯誤總和檢查碼的 sun 磁碟標籤。\n"
+"也許您必須設定所有的值，\n"
+"例如：磁頭、磁區、磁柱和分割區，\n"
+"或是強制設定新的標籤 (使用主選單的 s 命令)\n"
-#: misc-utils/findmnt.c:91 misc-utils/lsblk.c:106
-#, fuzzy
-msgid "filesystem type"
-msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+#: libfdisk/src/sun.c:153
+#, fuzzy, c-format
+msgid "Detected sun disklabel with wrong version [%d]."
+msgstr "偵測到具有錯誤版本 [0x%08x] 的 sun 磁碟標籤。\n"
-#: misc-utils/findmnt.c:92
-#, fuzzy
-msgid "all mount options"
-msgstr "å\89\96æ\9e\90 pid æ\99\82失æ\95\97"
+#: libfdisk/src/sun.c:158
+#, fuzzy, c-format
+msgid "Detected sun disklabel with wrong vtoc.sanity [0x%08x]."
+msgstr "å\81µæ¸¬å\88°å\85·æ\9c\89ä¸\8då®\8cæ\95´æ\80§ [0x%08x] ç\9a\84 sun ç£\81ç¢\9fæ¨\99籤ã\80\82\n"
-#: misc-utils/findmnt.c:93
-msgid "VFS specific mount options"
-msgstr ""
+#: libfdisk/src/sun.c:163
+#, fuzzy, c-format
+msgid "Detected sun disklabel with wrong vtoc.nparts [%u]."
+msgstr "偵測到具有錯誤分割區數 [%u] 的 sun 磁碟標籤。\n"
-#: misc-utils/findmnt.c:94
+#: libfdisk/src/sun.c:168
#, fuzzy
-msgid "FS specific mount options"
-msgstr "有用的選項："
+msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)"
+msgstr "警告：錯誤值需要經由 w(rite) 而修正\n"
+
+#: libfdisk/src/sun.c:193
+msgid "Heads"
+msgstr "磁頭"
+
+#: libfdisk/src/sun.c:198
+msgid "Sectors/track"
+msgstr "磁區/磁軌"
-#: misc-utils/findmnt.c:95
+#: libfdisk/src/sun.c:301
#, fuzzy
-msgid "filesystem label"
-msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+msgid "Created a new Sun disklabel."
+msgstr "建立新的清空 Sun disklabel"
-#: misc-utils/findmnt.c:96 misc-utils/lsblk.c:109
-msgid "filesystem UUID"
-msgstr ""
+#: libfdisk/src/sun.c:425
+#, fuzzy, c-format
+msgid "Partition %u doesn't end on cylinder boundary."
+msgstr "分割區 %d 並非結束於磁柱邊界\n"
-#: misc-utils/findmnt.c:97 misc-utils/lsblk.c:105
-msgid "major:minor device number"
-msgstr ""
+#: libfdisk/src/sun.c:444
+#, fuzzy, c-format
+msgid "Partition %u overlaps with others in sectors %u-%u."
+msgstr "分割區 %d 與 %d-%d 中的其他磁區重疊\n"
-#: misc-utils/findmnt.c:98
-msgid "action detected by --poll"
+#: libfdisk/src/sun.c:472
+#, fuzzy, c-format
+msgid "Unused gap - sectors 0-%u."
+msgstr "未使用的間隙 - 磁區 0-%d\n"
+
+#: libfdisk/src/sun.c:474 libfdisk/src/sun.c:480
+#, fuzzy, c-format
+msgid "Unused gap - sectors %u-%u."
+msgstr "未使用的間隙 - 磁區 %d-%d\n"
+
+#: libfdisk/src/sun.c:542
+#, fuzzy
+msgid "Other partitions already cover the whole disk. Delete some/shrink them before retry."
msgstr ""
+"其他分割區已經涵蓋整個磁碟。\n"
+"請於重試之前刪除部分或縮減它們。\n"
-#: misc-utils/findmnt.c:99
-msgid "old mount options saved by --poll"
+#: libfdisk/src/sun.c:559
+#, fuzzy
+msgid "It is highly recommended that the third partition covers the whole disk and is of type `Whole disk'"
msgstr ""
+"強烈建議第三分割區包括\n"
+"整個磁碟並且為「整顆磁碟」類型\n"
-#: misc-utils/findmnt.c:100
-msgid "old mountpoint saved by --poll"
+#: libfdisk/src/sun.c:601
+#, c-format
+msgid "Aligning the first sector from %u to %u to be on cylinder boundary."
msgstr ""
-#: misc-utils/findmnt.c:218
+#: libfdisk/src/sun.c:629
#, fuzzy, c-format
-msgid "unknown action: %s"
-msgstr "不明直欄：%s"
+msgid "Sector %d is already allocated"
+msgstr "磁區 %d 已經被配置\n"
-#: misc-utils/findmnt.c:261 misc-utils/lsblk.c:214 partx/partx.c:148
-#: sys-utils/lscpu.c:257 sys-utils/prlimit.c:270
-#, c-format
-msgid "unknown column: %s"
-msgstr "不明直欄：%s"
+#: libfdisk/src/sun.c:658
+#, fuzzy, c-format
+msgid "Last %s or +/-%s or +/-size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: misc-utils/findmnt.c:367
-#, fuzzy
-msgid "mount"
-msgstr "ncount"
+#: libfdisk/src/sun.c:706
+#, fuzzy, c-format
+msgid ""
+"You haven't covered the whole disk with the 3rd partition, but your value\n"
+"%lu %s covers some other partition. Your entry has been changed\n"
+"to %lu %s"
+msgstr ""
+"您未以第三分割區涵蓋整個磁碟，但是您設定的值\n"
+"%d %s 涵蓋某些其他的分割區。您的輸入值已變更\n"
+"為 %d %s\n"
-#: misc-utils/findmnt.c:370
-#, fuzzy
-msgid "umount"
-msgstr "ncount"
+#: libfdisk/src/sun.c:749
+#, fuzzy, c-format
+msgid "If you want to maintain SunOS/Solaris compatibility, consider leaving this partition as Whole disk (5), starting at 0, with %u sectors"
+msgstr ""
+"如果您要維持 SunOS/Solaris 的相容性，請考慮保持這個\n"
+"分割區為整個磁碟 (5)，開始於 0, 具備 %u 磁區\n"
-#: misc-utils/findmnt.c:373
+#: libfdisk/src/sun.c:773
#, fuzzy
-msgid "remount"
-msgstr "讀取計數"
+msgid "Label ID"
+msgstr "標籤：%.*s\n"
-#: misc-utils/findmnt.c:376
+#: libfdisk/src/sun.c:778
#, fuzzy
-msgid "move"
-msgstr " 移除"
+msgid "Volume ID"
+msgstr "卷冊：<%-6s>\n"
-#: misc-utils/findmnt.c:411 misc-utils/findmnt.c:428 partx/partx.c:438
-#: sys-utils/prlimit.c:221
-msgid "failed to add line to output"
-msgstr "加入輸出列時失敗"
+#: libfdisk/src/sun.c:788
+#, fuzzy
+msgid "Alternate cylinders"
+msgstr "替代磁柱數量"
-#: misc-utils/findmnt.c:493
-#, fuzzy, c-format
-msgid "%s: parse error at line %d"
-msgstr "剖析錯誤發生於列號："
+#: libfdisk/src/sun.c:894
+msgid "Number of alternate cylinders"
+msgstr "替代磁柱數量"
-#: misc-utils/findmnt.c:520 misc-utils/findmnt.c:719 sys-utils/mount.c:546
-#, fuzzy
-msgid "failed to initialize libmount table"
-msgstr "初始化 libmount 頁標時失敗"
+#: libfdisk/src/sun.c:919
+msgid "Extra sectors per cylinder"
+msgstr "每磁柱的額外磁區"
-#: misc-utils/findmnt.c:547 text-utils/parse.c:64
-#, fuzzy, c-format
-msgid "can't read %s"
-msgstr "無法讀取：%s"
+#: libfdisk/src/sun.c:943
+msgid "Interleave factor"
+msgstr "交錯因子"
-#: misc-utils/findmnt.c:659 misc-utils/findmnt.c:725 sys-utils/mount.c:143
-#: sys-utils/mount.c:187 sys-utils/umount.c:240
-msgid "failed to initialize libmount iterator"
-msgstr "初始化 libmount 迭代器時失敗"
+#: libfdisk/src/sun.c:967
+msgid "Rotation speed (rpm)"
+msgstr "旋轉速度 (rpm)"
-#: misc-utils/findmnt.c:731
-#, fuzzy
-msgid "failed to initialize libmount tabdiff"
-msgstr "初始化 libmount 頁標時失敗"
+#: libfdisk/src/sun.c:991
+msgid "Number of physical cylinders"
+msgstr "實體磁柱數量"
-#: misc-utils/findmnt.c:759
+#: libfdisk/src/sun.c:1056
#, fuzzy
-msgid "poll() failed"
-msgstr "malloc() 失敗"
-
-#: misc-utils/findmnt.c:820
-#, c-format
msgid ""
-"\n"
-"Usage:\n"
-" %1$s [options]\n"
-" %1$s [options] <device> | <mountpoint>\n"
-" %1$s [options] <device> <mountpoint>\n"
-" %1$s [options] [--source <device>] [--target <mountpoint>]\n"
+"Consider leaving partition 3 as Whole disk (5),\n"
+"as SunOS/Solaris expects it and even Linux likes it.\n"
msgstr ""
+"考慮保留分割區 3 為整個磁碟 (5)，\n"
+"SunOS/Solaris 是如此預期．甚至 Linux 也喜歡它。\n"
"\n"
-"用法：\n"
-" %1$s [選項]\n"
-" %1$s [選項] <裝置> |<掛載點>\n"
-" %1$s [選項] <裝置> <掛載點>\n"
-" %1$s [選項] [--source <裝置>] [--target <掛載點>]\n"
-#: misc-utils/findmnt.c:828
-#, c-format
+#: libfdisk/src/sun.c:1067
+#, fuzzy
msgid ""
-"\n"
-"Options:\n"
-" -s, --fstab search in static table of filesystems\n"
-" -m, --mtab search in table of mounted filesystems\n"
-" -k, --kernel search in kernel table of mounted\n"
-" filesystems (default)\n"
-"\n"
+"It is highly recommended that the partition at offset 0\n"
+"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
+"there may destroy your partition table and bootblock.\n"
+"Are you sure you want to tag the partition as Linux swap?"
msgstr ""
+"強烈建議位於偏移值 0 的分割區\n"
+"為 UFS、EXT2FS 檔案系統或 SunOS 交換區。將 Linux 交換區放在\n"
+"那裡也許會銷毀您的分割表和啟動區塊。\n"
+"如果您很確定想要該分割區被\n"
+"標示為 82 (Linux 交換區) 就輸入 YES："
-#: misc-utils/findmnt.c:835
-#, c-format
-msgid ""
-" -p, --poll[=<list>] monitor changes in table of mounted filesystems\n"
-" -w, --timeout <num> upper limit in milliseconds that --poll will block\n"
-"\n"
-msgstr ""
+#: libmount/src/context.c:2758
+#, fuzzy, c-format
+msgid "operation failed: %m"
+msgstr "開啟失敗：%s"
-#: misc-utils/findmnt.c:839
-#, c-format
-msgid ""
-" -a, --ascii use ASCII chars for tree formatting\n"
-" -c, --canonicalize canonicalize printed paths\n"
-" -d, --direction <word> direction of search, 'forward' or 'backward'\n"
-" -e, --evaluate convert tags (LABEL/UUID) to device names\n"
-" -F, --tab-file <path> alternative file for --fstab, --mtab or --kernel "
-"options\n"
-" -f, --first-only print the first found filesystem only\n"
-msgstr ""
+#: libmount/src/context_mount.c:1593
+#, fuzzy, c-format
+msgid "WARNING: failed to apply propagation flags"
+msgstr "附加選項時失敗"
-#: misc-utils/findmnt.c:847
-#, c-format
-msgid ""
-" -h, --help display this help text and exit\n"
-" -i, --invert invert the sense of matching\n"
-" -l, --list use list format output\n"
-" -n, --noheadings don't print column headings\n"
-" -u, --notruncate don't truncate text in columns\n"
-msgstr ""
+#: libmount/src/context_mount.c:1603
+#, fuzzy, c-format
+msgid "WARNING: device write-protected, mounted read-only"
+msgstr "%s 被防止寫入的，掛載唯讀"
-#: misc-utils/findmnt.c:853
+#: libmount/src/context_mount.c:1617
#, c-format
-msgid ""
-" -O, --options <list> limit the set of filesystems by mount options\n"
-" -o, --output <list> the output columns to be shown\n"
-" -P, --pairs use key=\"value\" output format\n"
-" -r, --raw use raw output format\n"
-" -t, --types <list> limit the set of filesystems by FS types\n"
+msgid "operation permitted for root only"
msgstr ""
-#: misc-utils/findmnt.c:859
-#, c-format
-msgid ""
-" -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
-" -R, --submounts print all submounts for the matching filesystems\n"
-" -S, --source <string> the device to mount (by name, LABEL= or UUID=)\n"
-" -T, --target <string> the mountpoint to use\n"
-"\n"
-msgstr ""
+#: libmount/src/context_mount.c:1621
+#, fuzzy, c-format
+msgid "%s is already mounted"
+msgstr "%s 已經掛載"
-#: misc-utils/findmnt.c:865 misc-utils/lsblk.c:938 sys-utils/lscpu.c:1225
+#: libmount/src/context_mount.c:1627
#, fuzzy, c-format
-msgid ""
-"\n"
-"Available columns:\n"
-msgstr "可用命令：\n"
+msgid "can't find in %s"
+msgstr "找不到 %s 在中 %s"
-#: misc-utils/findmnt.c:871
-#, c-format
-msgid ""
-"\n"
-"For more information see findmnt(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 findmnt(1)。\n"
+#: libmount/src/context_mount.c:1630
+#, fuzzy, c-format
+msgid "can't find mount point in %s"
+msgstr "找不到 mountpoint %s 在中 %s"
-#: misc-utils/findmnt.c:879 misc-utils/lsblk.c:951
-msgid "options are mutually exclusive"
-msgstr "選項彼此互斥"
+#: libmount/src/context_mount.c:1633
+#, fuzzy, c-format
+msgid "can't find mount source %s in %s"
+msgstr "找不到掛載來源 %s 在中 %s"
-#: misc-utils/findmnt.c:949
+#: libmount/src/context_mount.c:1638
#, c-format
-msgid "unknown direction '%s'"
-msgstr "不明方向「%s」"
-
-#: misc-utils/findmnt.c:1043
-#, fuzzy
-msgid "failed to parse timeout"
-msgstr "剖析 pid 時失敗"
-
-#: misc-utils/findmnt.c:1070
-msgid "--poll accepts only one file, but mure specified by --tab-file"
+msgid "more filesystems detected on %s; use -t <type> or wipefs(8)"
msgstr ""
-#: misc-utils/findmnt.c:1075
-msgid ""
-"options --target and --source can't be used together with command line "
-"element that is not an option"
-msgstr "選項 --target 和 --source 無法與不是選項的命令列元素一起使用"
-
-#: misc-utils/findmnt.c:1117
-msgid "failed to initialize libmount cache"
-msgstr "初始化 libmount 快取時失敗"
+#: libmount/src/context_mount.c:1643
+#, fuzzy, c-format
+msgid "failed to determine filesystem type"
+msgstr "%s：無法讀取速度"
-#: misc-utils/findmnt.c:1127 misc-utils/lsblk.c:1094 partx/partx.c:526
-#: sys-utils/lscpu.c:1016 sys-utils/prlimit.c:282
-msgid "failed to initialize output table"
-msgstr "初始化輸出表格時失敗"
+#: libmount/src/context_mount.c:1644
+#, fuzzy, c-format
+msgid "no filesystem type specified"
+msgstr "未指定任何檔名"
-#: misc-utils/findmnt.c:1139
-#, c-format
-msgid "%s column is requested, but --poll is not enabled"
-msgstr ""
+#: libmount/src/context_mount.c:1651
+#, fuzzy, c-format
+msgid "can't find %s"
+msgstr "找不到 %s"
-#: misc-utils/findmnt.c:1145 misc-utils/lsblk.c:1104 partx/partx.c:534
-#: sys-utils/prlimit.c:290
-msgid "failed to initialize output column"
-msgstr "初始化輸出欄時失敗"
+#: libmount/src/context_mount.c:1653
+#, fuzzy, c-format
+msgid "no mount source specified"
+msgstr "沒有 mountpoint 指定的。"
-#: misc-utils/kill.c:213
-#, c-format
-msgid "%s: unknown signal %s\n"
-msgstr "%s：不明信號 %s\n"
+#: libmount/src/context_mount.c:1659
+#, fuzzy, c-format
+msgid "failed to parse mount options: %m"
+msgstr "剖析掛載選項時失敗"
-#: misc-utils/kill.c:246
-#, fuzzy
-msgid "failed to parse sigval"
-msgstr "剖析 %s %s 時失敗"
+#: libmount/src/context_mount.c:1660
+#, fuzzy, c-format
+msgid "failed to parse mount options"
+msgstr "剖析掛載選項時失敗"
-#: misc-utils/kill.c:287
-#, c-format
-msgid "%s: can't find process \"%s\"\n"
-msgstr "%s：找不到進程「%s」\n"
+#: libmount/src/context_mount.c:1664
+#, fuzzy, c-format
+msgid "failed to setup loop device for %s"
+msgstr "%s：無法設定迴圈裝置"
-#: misc-utils/kill.c:367
-#, c-format
-msgid "%s: unknown signal %s; valid signals:\n"
-msgstr "%s：不明信號 %s; 有效信號：\n"
+#: libmount/src/context_mount.c:1668
+#, fuzzy, c-format
+msgid "overlapping loop device exists for %s"
+msgstr "%s 不是 lp 裝置"
-#: misc-utils/kill.c:415
-#, c-format
-msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
-msgstr "用法：%s [-s signal | -p ] [ -a ] pid…\n"
+#: libmount/src/context_mount.c:1672 libmount/src/context_umount.c:1207
+#, fuzzy, c-format
+msgid "locking failed"
+msgstr "關閉 %s 失敗"
-#: misc-utils/kill.c:416
-#, c-format
-msgid " %s -l [ signal ]\n"
-msgstr " %s -l [ signal ]\n"
+#: libmount/src/context_mount.c:1676 libmount/src/context_umount.c:1211
+#: sys-utils/umount.c:247 sys-utils/umount.c:263
+#, fuzzy, c-format
+msgid "failed to switch namespace"
+msgstr "狀態的裝置"
-#: misc-utils/logger.c:73
+#: libmount/src/context_mount.c:1679
#, fuzzy, c-format
-msgid "openlog %s: pathname too long"
-msgstr "logger：openlog：路徑名稱太長\n"
+msgid "mount failed: %m"
+msgstr "掛載失敗"
-#: misc-utils/logger.c:79
+#: libmount/src/context_mount.c:1689
#, fuzzy, c-format
-msgid "socket %s"
-msgstr "通訊端：%s。\n"
+msgid "filesystem was mounted, but failed to update userspace mount table"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/logger.c:82
+#: libmount/src/context_mount.c:1693
#, fuzzy, c-format
-msgid "connect %s"
-msgstr "連接：%s。\n"
+msgid "filesystem was mounted, but failed to switch namespace back"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/logger.c:97 misc-utils/uuidd.c:140
-msgid "socket"
-msgstr "通訊端"
+#: libmount/src/context_mount.c:1698
+#, fuzzy, c-format
+msgid "filesystem was mounted, but any subsequent operation failed: %m"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/logger.c:104 misc-utils/uuidd.c:151
-msgid "connect"
-msgstr "連接"
+#: libmount/src/context_mount.c:1716 libmount/src/context_mount.c:1773
+#, fuzzy, c-format
+msgid "mount point is not a directory"
+msgstr "掛載點 %s 並非目錄"
-#: misc-utils/logger.c:140
+#: libmount/src/context_mount.c:1718 login-utils/newgrp.c:226
#, fuzzy, c-format
-msgid " %s [options] [message]\n"
-msgstr ""
-"\n"
-"用法：%s [選項]\n"
-"\n"
+msgid "permission denied"
+msgstr "權限被拒"
-#: misc-utils/logger.c:143
-msgid ""
-" -d, --udp use UDP (TCP is default)\n"
-" -i, --id log the process ID too\n"
-" -f, --file <file> log the contents of this file\n"
-" -h, --help display this help text and exit\n"
-msgstr ""
+#: libmount/src/context_mount.c:1720
+#, fuzzy, c-format
+msgid "must be superuser to use mount"
+msgstr "必須是系統管理者以使用掛載"
-#: misc-utils/logger.c:147
-msgid ""
-" -n, --server <name> write to this remote syslog server\n"
-" -P, --port <number> use this UDP port\n"
-" -p, --priority <prio> mark given message with this priority\n"
-" -s, --stderr output message to standard error as well\n"
-msgstr ""
+#: libmount/src/context_mount.c:1730
+#, fuzzy, c-format
+msgid "mount point is busy"
+msgstr "mount：%s 忙碌中"
-#: misc-utils/logger.c:151
-msgid ""
-" -t, --tag <tag> mark every line with this tag\n"
-" -u, --socket <socket> write to this Unix socket\n"
-" -V, --version output version information and exit\n"
-"\n"
-msgstr ""
+#: libmount/src/context_mount.c:1743
+#, fuzzy, c-format
+msgid "%s already mounted on %s"
+msgstr "mount：%s 已經掛載到 %s\n"
-#: misc-utils/logger.c:200
+#: libmount/src/context_mount.c:1749
#, fuzzy, c-format
-msgid "file %s"
-msgstr "(下一個檔案：%s)"
+msgid "%s already mounted or mount point busy"
+msgstr "%s 已經掛載的或 %s 忙碌"
-#: misc-utils/logger.c:227
-#, fuzzy
-msgid "failed to parse port number"
-msgstr "剖析優先權時失敗"
+#: libmount/src/context_mount.c:1755
+#, fuzzy, c-format
+msgid "mount point does not exist"
+msgstr "掛載點 %s 不存在"
-#: misc-utils/logger.c:229
+#: libmount/src/context_mount.c:1758
#, fuzzy, c-format
-msgid "port `%ld' out of range"
-msgstr "æ\95¸å\80¼è¶\85å\87ºç¯\84å\9c\8dã\80\82\n"
+msgid "mount point is a symbolic link to nowhere"
+msgstr "æ\8e\9bè¼\89é»\9e %s æ\98¯ç¬¦è\99\9fé\80£çµ\90å\88° nowhere"
-#: misc-utils/logger.c:327
+#: libmount/src/context_mount.c:1763
#, fuzzy, c-format
-msgid "unknown facility name: %s."
-msgstr "logger：不明功能名稱：%s。\n"
+msgid "special device %s does not exist"
+msgstr "特殊裝置 %s 不存在"
-#: misc-utils/logger.c:337
+#: libmount/src/context_mount.c:1766 libmount/src/context_mount.c:1782
+#: libmount/src/context_mount.c:1866 libmount/src/context_mount.c:1889
#, fuzzy, c-format
-msgid "unknown priority name: %s."
-msgstr "logger：不明的優先名稱：%s。\n"
+msgid "mount(2) system call failed: %m"
+msgstr "掛載 (2) 失敗"
-#: misc-utils/look.c:368
+#: libmount/src/context_mount.c:1778
#, fuzzy, c-format
-msgid " %s [options] string [file]\n"
-msgstr "ç\94¨æ³\95ï¼\9a%s [é\81¸é \85] è£\9dç½®â\80¦\n"
+msgid "special device %s does not exist (a path prefix is not a directory)"
+msgstr "ç\89¹æ®\8aè£\9dç½® %s ä¸\8då\98å\9c¨ (a è·¯å¾\91å\89\8d綴並é\9d\9eç\9b®é\8c\84)"
-#: misc-utils/look.c:371
-msgid ""
-" -a, --alternative use alternate dictionary\n"
-" -d, --alphanum compare only alpha numeric characters\n"
-" -f, --ignore-case ignore when comparing\n"
-" -t, --terminate <char> define string termination character\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
+#: libmount/src/context_mount.c:1790
+#, fuzzy, c-format
+msgid "mount point not mounted or bad option"
+msgstr "掛載：%s 無法掛載的或不當的選項"
-#: misc-utils/lsblk.c:103
-msgid "device name"
-msgstr ""
+#: libmount/src/context_mount.c:1792
+#, fuzzy, c-format
+msgid "not mount point or bad option"
+msgstr "%s 不是 mountpoint 或不當的選項"
-#: misc-utils/lsblk.c:104
-msgid "internal kernel device name"
+#: libmount/src/context_mount.c:1795
+#, c-format
+msgid "bad option; moving a mount residing under a shared mount is unsupported"
msgstr ""
-#: misc-utils/lsblk.c:107
-msgid "where the device is mounted"
+#: libmount/src/context_mount.c:1799
+#, fuzzy, c-format
+msgid "bad option; for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program"
msgstr ""
+" (對於許多檔案系統 (例如 nfs，cifs) 您也許\n"
+" 需要 /sbin/mount.<type> 輔助程式)"
-#: misc-utils/lsblk.c:108
-msgid "filesystem LABEL"
+#: libmount/src/context_mount.c:1803
+#, fuzzy, c-format
+msgid "wrong fs type, bad option, bad superblock on %s, missing codepage or helper program, or other error"
msgstr ""
+"錯誤的 fs 型態，不當的選項，不當的超區塊於 %s，\n"
+" 缺少的編碼頁或輔助程式程式，或其他錯誤"
-#: misc-utils/lsblk.c:110
-#, fuzzy
-msgid "read-only device"
-msgstr "設定唯讀"
-
-#: misc-utils/lsblk.c:111
-#, fuzzy
-msgid "removable device"
-msgstr " 可移除的"
-
-#: misc-utils/lsblk.c:112
-msgid "rotational device"
-msgstr ""
+#: libmount/src/context_mount.c:1810
+#, c-format
+msgid "mount table full"
+msgstr "掛載表已滿"
-#: misc-utils/lsblk.c:113
-msgid "device identifier"
-msgstr ""
+#: libmount/src/context_mount.c:1815
+#, fuzzy, c-format
+msgid "can't read superblock on %s"
+msgstr "%s：無法讀取超區塊"
-#: misc-utils/lsblk.c:114
-msgid "size of the device"
-msgstr ""
+#: libmount/src/context_mount.c:1822
+#, fuzzy, c-format
+msgid "unknown filesystem type '%s'"
+msgstr "不明檔案系統型態『%s』"
-#: misc-utils/lsblk.c:115
-#, fuzzy
-msgid "state of the device"
-msgstr "路徑 stat 時失敗\n"
+#: libmount/src/context_mount.c:1825
+#, fuzzy, c-format
+msgid "unknown filesystem type"
+msgstr "不明檔案系統型態『%s』"
-#: misc-utils/lsblk.c:116
-#, fuzzy
-msgid "user name"
-msgstr "不合法的使用者名稱"
+#: libmount/src/context_mount.c:1834
+#, fuzzy, c-format
+msgid "%s is not a block device, and stat(2) fails?"
+msgstr "%s 並非區塊裝置，而stat (2) 失敗？"
-#: misc-utils/lsblk.c:117
-msgid "group name"
+#: libmount/src/context_mount.c:1837
+#, fuzzy, c-format
+msgid "the kernel does not recognize %s as a block device; maybe \"modprobe driver\" is necessary"
msgstr ""
+"內核不識別 %s 做為區塊裝置\n"
+" (也許『modprobe 驅動程式』?)"
-#: misc-utils/lsblk.c:118
-msgid "device node permissions"
-msgstr ""
+#: libmount/src/context_mount.c:1840
+#, fuzzy, c-format
+msgid "%s is not a block device; try \"-o loop\""
+msgstr "%s 並非區塊裝置 (也許嘗試『-o 迴圈』?)"
-#: misc-utils/lsblk.c:119
-#, fuzzy
-msgid "alignment offset"
-msgstr "取得對齊偏移值"
+#: libmount/src/context_mount.c:1842
+#, fuzzy, c-format
+msgid "%s is not a block device"
+msgstr " %s 並非區塊裝置"
-#: misc-utils/lsblk.c:120
-#, fuzzy
-msgid "minimum I/O size"
-msgstr "取得最小 I/O 大小"
+#: libmount/src/context_mount.c:1849
+#, fuzzy, c-format
+msgid "%s is not a valid block device"
+msgstr "%s 並非有效區塊裝置"
-#: misc-utils/lsblk.c:121
-#, fuzzy
-msgid "optimal I/O size"
-msgstr "取得最佳化 I/O 大小"
+#: libmount/src/context_mount.c:1857
+#, fuzzy, c-format
+msgid "cannot mount %s read-only"
+msgstr "無法掛載 %s 唯讀"
-#: misc-utils/lsblk.c:122
-#, fuzzy
-msgid "physical sector size"
-msgstr "取得實際區塊 (磁區) 大小"
+#: libmount/src/context_mount.c:1859
+#, fuzzy, c-format
+msgid "%s is write-protected but explicit read-write mode requested"
+msgstr "%s 被防止寫入的但是明確的『-w』旗標給定的"
-#: misc-utils/lsblk.c:123
-#, fuzzy
-msgid "logical sector size"
-msgstr "取得邏輯區塊 (磁區) 大小"
+#: libmount/src/context_mount.c:1861
+#, fuzzy, c-format
+msgid "cannot remount %s read-write, is write-protected"
+msgstr "無法 remount %s 可讀可寫，被防止寫入的"
-#: misc-utils/lsblk.c:124
-msgid "I/O scheduler name"
-msgstr ""
+#: libmount/src/context_mount.c:1863
+#, fuzzy, c-format
+msgid "bind %s failed"
+msgstr "%s 失敗。\n"
-#: misc-utils/lsblk.c:125
-msgid "request queue size"
-msgstr ""
+#: libmount/src/context_mount.c:1874
+#, fuzzy, c-format
+msgid "no medium found on %s"
+msgstr "找不到任何中於 %s"
-#: misc-utils/lsblk.c:126
-msgid "device type"
-msgstr ""
+#: libmount/src/context_mount.c:1881
+#, fuzzy, c-format
+msgid "cannot mount; probably corrupted filesystem on %s"
+msgstr "將不會試著於「%s」製作檔案系統"
-#: misc-utils/lsblk.c:127
-#, fuzzy
-msgid "discard alignment offset"
-msgstr "取得對齊偏移值"
+#: libmount/src/context_umount.c:1203 libmount/src/context_umount.c:1249
+#, fuzzy, c-format
+msgid "not mounted"
+msgstr "%s：無法掛載"
-#: misc-utils/lsblk.c:128
-msgid "discard granularity"
-msgstr ""
+#: libmount/src/context_umount.c:1215
+#, fuzzy, c-format
+msgid "umount failed: %m"
+msgstr "%s：umount 失敗"
-#: misc-utils/lsblk.c:129
-msgid "discard max bytes"
-msgstr ""
+#: libmount/src/context_umount.c:1224
+#, fuzzy, c-format
+msgid "filesystem was unmounted, but failed to update userspace mount table"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/lsblk.c:130
-msgid "discard zeroes data"
-msgstr ""
+#: libmount/src/context_umount.c:1228
+#, fuzzy, c-format
+msgid "filesystem was unmounted, but failed to switch namespace back"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/lsblk.c:694
+#: libmount/src/context_umount.c:1233
#, fuzzy, c-format
-msgid "%s: failed to get device path"
-msgstr "%s：無法探查裝置"
+msgid "filesystem was unmounted, but any subsequent operation failed: %m"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/lsblk.c:701
+#: libmount/src/context_umount.c:1246
#, fuzzy, c-format
-msgid "%s: unknown device name"
-msgstr "mount：%s: 不明的裝置"
+msgid "invalid block device"
+msgstr "%s：無效的區塊裝置"
-#: misc-utils/lsblk.c:706
+#: libmount/src/context_umount.c:1252
#, fuzzy, c-format
-msgid "%s: failed to initialize sysfs handler"
-msgstr "初始化列緩衝區時失敗\n"
+msgid "can't write superblock"
+msgstr "%s：無法寫入超區塊"
-#: misc-utils/lsblk.c:725
+#: libmount/src/context_umount.c:1255
#, fuzzy, c-format
-msgid "%s: failed to get dm name"
-msgstr "%s：無法開啟"
+msgid "target is busy"
+msgstr "%s 忙碌中"
-#: misc-utils/lsblk.c:757
-msgid "failed to open device directory in sysfs"
-msgstr ""
+#: libmount/src/context_umount.c:1258
+#, fuzzy, c-format
+msgid "no mount point specified"
+msgstr "沒有 mountpoint 指定的。"
-#: misc-utils/lsblk.c:837
+#: libmount/src/context_umount.c:1261
#, fuzzy, c-format
-msgid "%s: failed to get whole-disk device number"
-msgstr "%s：無法尋指到交換標籤 "
+msgid "must be superuser to unmount"
+msgstr "%s：必須是系統管理者到 umount"
-#: misc-utils/lsblk.c:854
+#: libmount/src/context_umount.c:1264
#, fuzzy, c-format
-msgid "failed to compose sysfs path for %s"
-msgstr "剖析 %s %s 時失敗"
+msgid "block devices are not permitted on filesystem"
+msgstr "%s：區塊裝置無法允許的於 fs"
-#: misc-utils/lsblk.c:861
+#: libmount/src/context_umount.c:1267
#, fuzzy, c-format
-msgid "%s: failed to read link"
-msgstr "%s：無法開啟"
+msgid "umount(2) system call failed: %m"
+msgstr "掛載 (2) 失敗"
-#: misc-utils/lsblk.c:900
+#: lib/pager.c:112
#, fuzzy, c-format
-msgid "failed to parse list '%s'"
-msgstr "剖析 %s %s 時失敗"
+msgid "waitpid failed (%s)"
+msgstr "waitpid 失敗 (%s)"
-#. TRANSLATORS: The standard value for %d is 256.
-#: misc-utils/lsblk.c:905
-#, c-format
-msgid "the list of excluded devices is too large (limit is %d devices)"
-msgstr ""
+#: lib/plymouth-ctrl.c:73
+#, fuzzy
+msgid "cannot open UNIX socket"
+msgstr "無法開啟 %s"
-#: misc-utils/lsblk.c:917
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] [<device> ...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: lib/plymouth-ctrl.c:79
+#, fuzzy
+msgid "cannot set option for UNIX socket"
+msgstr "無法設定逾時用於 %s"
+
+#: lib/plymouth-ctrl.c:90
+#, fuzzy
+msgid "cannot connect on UNIX socket"
+msgstr "無法開啟 %s"
-#: misc-utils/lsblk.c:921
+#: lib/plymouth-ctrl.c:128
#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -a, --all print all devices\n"
-" -b, --bytes print SIZE in bytes rather than in human readable "
-"format\n"
-" -d, --nodeps don't print slaves or holders\n"
-" -D, --discard print discard capabilities\n"
-" -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
-" -f, --fs output info about filesystems\n"
-" -h, --help usage information (this)\n"
-" -i, --ascii use ascii characters only\n"
-" -m, --perms output info about permissions\n"
-" -l, --list use list format ouput\n"
-" -n, --noheadings don't print headings\n"
-" -o, --output <list> output columns\n"
-" -P, --pairs use key=\"value\" output format\n"
-" -r, --raw use raw output format\n"
-" -t, --topology output info about topology\n"
-msgstr ""
-
-#: misc-utils/lsblk.c:943
-#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see lsblk(8).\n"
+msgid "the plymouth request %c is not implemented"
msgstr ""
-"\n"
-"要獲得更多資訊請參看 swaplabel(8)。\n"
-
-#: misc-utils/lsblk.c:957
-#, fuzzy, c-format
-msgid "failed to access sysfs directory: %s"
-msgstr "剖析 %s %s 時失敗"
-
-#: misc-utils/mcookie.c:68 misc-utils/uuidd.c:56 misc-utils/uuidgen.c:35
-#: sys-utils/arch.c:33 sys-utils/dmesg.c:147 sys-utils/ipcmk.c:66
-#: sys-utils/lscpu.c:1212 sys-utils/readprofile.c:103 sys-utils/rtcwake.c:87
-#: term-utils/setterm.c:677
-#, fuzzy, c-format
-msgid " %s [options]\n"
-msgstr "用法：%s [選項]\n"
-#: misc-utils/mcookie.c:71
-msgid ""
-" -f, --file <file> use file as a cookie seed\n"
-" -v, --verbose explain what is being done\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: lib/randutils.c:187
+msgid "getrandom() function"
msgstr ""
-#: misc-utils/mcookie.c:144 misc-utils/mcookie.c:178
-#, fuzzy, c-format
-msgid "Could not open %s"
-msgstr "無法開啟 %s\n"
+#: lib/randutils.c:200
+msgid "libc pseudo-random functions"
+msgstr ""
-#: misc-utils/mcookie.c:149 misc-utils/mcookie.c:173
+#: lib/swapprober.c:17 lib/swapprober.c:30
#, c-format
-msgid "Got %d bytes from %s\n"
-msgstr "從 %2$s 取得 %1$d 位元組\n"
+msgid "%s: unable to probe device"
+msgstr "%s：無法探查裝置"
-#: misc-utils/mcookie.c:155
+#: lib/swapprober.c:32
#, fuzzy, c-format
-msgid "closing %s failed"
-msgstr "執行 %s 時失敗"
+msgid "%s: ambiguous probing result; use wipefs(8)"
+msgstr "%s：探查結果產生矛盾，使用 wipefs(8)"
-#: misc-utils/namei.c:185
+#: lib/swapprober.c:34
#, c-format
-msgid "failed to read symlink: %s"
-msgstr "讀取符號連結時失敗：%s"
+msgid "%s: not a valid swap partition"
+msgstr "%s：不是有效的交換分割區"
-#: misc-utils/namei.c:224
+#: lib/swapprober.c:41
#, c-format
-msgid "could not stat '%s'"
-msgstr "無法顯示狀態「%s」"
+msgid "%s: unsupported swap version '%s'"
+msgstr "%s：不受支援的交換版本「%s」"
+
+#: lib/timeutils.c:465
+msgid "format_iso_time: buffer overflow."
+msgstr ""
-#: misc-utils/namei.c:363
+#: lib/timeutils.c:483 lib/timeutils.c:507
#, fuzzy, c-format
-msgid "%s - No such file or directory\n"
-msgstr "%s：需要檔案描述符號、檔案或目錄\n"
+msgid "time %ld is out of range."
+msgstr "數值超出範圍。\n"
-#: misc-utils/namei.c:413
+#: login-utils/chfn.c:96 login-utils/chsh.c:75 login-utils/lslogins.c:1326
#, fuzzy, c-format
-msgid " %s [options] pathname [pathname ...]\n"
-msgstr ""
-"\n"
-"用法：%s [選項] 路徑名稱 [路徑名稱...]\n"
+msgid " %s [options] [<username>]\n"
+msgstr " %s [選項] [使用者名稱]\n"
-#: misc-utils/namei.c:416
+#: login-utils/chfn.c:99
#, fuzzy
-msgid ""
-" -h, --help displays this help text\n"
-" -V, --version output version information and exit\n"
-" -x, --mountpoints show mount point directories with a 'D'\n"
-" -m, --modes show the mode bits of each file\n"
-" -o, --owners show owner and group name of each file\n"
-" -l, --long use a long listing format (-m -o -v) \n"
-" -n, --nosymlinks don't follow symlinks\n"
-" -v, --vertical vertical align of modes and owners\n"
-msgstr ""
-" -h, --help 顯示這個說明文字\n"
-" -x, --mountpoints 以「D」顯示掛載點目錄\n"
-" -m, --modes 顯示每個檔案的模式位元\n"
-" -o, --owners 顯示每個檔案的擁有者和群組名稱\n"
-" -l, --long 使用長列表格式 (-m -o -v)\n"
-" -n, --nosymlinks 不跟隨符號連結\n"
-" -v, --vertical 垂直對齊模式和擁有者\n"
+msgid "Change your finger information.\n"
+msgstr "修改 %s 的 finger 資訊。\n"
-#: misc-utils/namei.c:425
-msgid ""
-"\n"
-"For more information see namei(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 namei(1)。\n"
+#: login-utils/chfn.c:102
+#, fuzzy
+msgid " -f, --full-name <full-name> real name\n"
+msgstr " -f, --full-name <full-name> 真實名稱\n"
-#: misc-utils/namei.c:485
+#: login-utils/chfn.c:103
#, fuzzy
-msgid "pathname argument is missing"
-msgstr "--date 引數太長\n"
+msgid " -o, --office <office> office number\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: misc-utils/namei.c:509
-#, c-format
-msgid "%s: exceeded limit of symlinks"
-msgstr "%s：超出符號連結的限制"
+#: login-utils/chfn.c:104
+#, fuzzy
+msgid " -p, --office-phone <phone> office phone number\n"
+msgstr " -p, --office-phone <phone> 辦公室電話號碼\n"
-#: misc-utils/rename.c:53
-#, fuzzy, c-format
-msgid "renaming %s to %s failed"
-msgstr "%s：重新命名 %s 為 %s 時失敗：%s\n"
+#: login-utils/chfn.c:105
+#, fuzzy
+msgid " -h, --home-phone <phone> home phone number\n"
+msgstr " -h, --home-phone <phone> 個人資料夾電話號碼\n"
-#: misc-utils/rename.c:66
+#: login-utils/chfn.c:123
#, fuzzy, c-format
-msgid " %s [options] expression replacement file...\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "field %s is too long"
+msgstr "欄位 %s 太長"
-#: misc-utils/rename.c:70
-msgid ""
-" -v, --verbose explain what is being done\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: login-utils/chfn.c:127 login-utils/chsh.c:236
+#, c-format
+msgid "%s: has illegal characters"
msgstr ""
-#: misc-utils/uuidd.c:59
-msgid ""
-" -p, --pid <path> path to pid file\n"
-" -s, --socket <path> path to socket\n"
-" -T, --timeout <sec> specify inactivity timeout\n"
-" -k, --kill kill running daemon\n"
-" -r, --random test random-based generation\n"
-" -t, --time test time-based generation\n"
-" -n, --uuids <num> request number of uuids\n"
-" -d, --debug run in debugging mode\n"
-" -q, --quiet turn on quiet mode\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: login-utils/chfn.c:156 login-utils/chfn.c:162 login-utils/chfn.c:168
+#: login-utils/chfn.c:174
+#, c-format
+msgid "login.defs forbids setting %s"
msgstr ""
-#: misc-utils/uuidd.c:133
-msgid "bad arguments"
-msgstr "不當的引數"
+#: login-utils/chfn.c:162 login-utils/chfn.c:164 login-utils/chfn.c:325
+msgid "Office"
+msgstr "辦公室"
-#: misc-utils/uuidd.c:171
-msgid "write"
-msgstr "寫入"
+#: login-utils/chfn.c:168 login-utils/chfn.c:170 login-utils/chfn.c:327
+msgid "Office Phone"
+msgstr "辦公室電話"
-#: misc-utils/uuidd.c:179
-msgid "read count"
-msgstr "讀取計數"
+#: login-utils/chfn.c:174 login-utils/chfn.c:176 login-utils/chfn.c:329
+msgid "Home Phone"
+msgstr "住家電話"
-#: misc-utils/uuidd.c:185
-msgid "bad response length"
-msgstr "不當的回應長度"
+#: login-utils/chfn.c:193 login-utils/chsh.c:187
+msgid "cannot handle multiple usernames"
+msgstr ""
-#: misc-utils/uuidd.c:226
-#, fuzzy, c-format
-msgid "Failed to open/create %s: %m\n"
-msgstr "開啟/建立 %s 時失敗：%s\n"
+#: login-utils/chfn.c:247
+#, fuzzy
+msgid "Aborted."
+msgstr "放棄。"
-#: misc-utils/uuidd.c:243
-#, fuzzy, c-format
-msgid "Failed to lock %s: %m\n"
-msgstr "鎖定 %s 時失敗：%s\n"
+#: login-utils/chfn.c:310
+#, c-format
+msgid "%s: CHFN_RESTRICT has unexpected value: %s"
+msgstr ""
-#: misc-utils/uuidd.c:249
+#: login-utils/chfn.c:312
#, c-format
-msgid "uuidd daemon already running at pid %s\n"
-msgstr "uuidd 守護程式已經以 pid %s 運行中\n"
+msgid "%s: CHFN_RESTRICT does not allow any changes"
+msgstr ""
+
+#: login-utils/chfn.c:395
+#, c-format
+msgid "Finger information *NOT* changed. Try again later.\n"
+msgstr "Finger 資訊 *未被* 變更。請稍後再嘗試。\n"
+
+#: login-utils/chfn.c:399
+#, c-format
+msgid "Finger information changed.\n"
+msgstr "Finger 資訊已變更。\n"
-#: misc-utils/uuidd.c:257
+#: login-utils/chfn.c:425 login-utils/chsh.c:273
#, fuzzy, c-format
-msgid "Couldn't create unix stream socket: %m"
-msgstr "無法建立 unix 串流通訊端：%s"
+msgid "you (user %d) don't exist."
+msgstr "您 (使用者 %d) 不存在。"
-#: misc-utils/uuidd.c:283
+#: login-utils/chfn.c:431 login-utils/chsh.c:278 login-utils/libuser.c:59
#, fuzzy, c-format
-msgid "Couldn't bind unix socket %s: %m\n"
-msgstr "無法連結 unix 通訊端 %s：%s\n"
+msgid "user \"%s\" does not exist."
+msgstr "使用者「%s」不存在。"
+
+#: login-utils/chfn.c:437 login-utils/chsh.c:284
+#, fuzzy
+msgid "can only change local entries"
+msgstr "只能變更本地條目"
-#: misc-utils/uuidd.c:290
+#: login-utils/chfn.c:450
#, fuzzy, c-format
-msgid "Couldn't listen on unix socket %s: %m\n"
-msgstr "無法監聽 unix 通訊端 %s：%s\n"
+msgid "%s is not authorized to change the finger info of %s"
+msgstr "%s 未被授權到變更手指資訊的 %s"
-#: misc-utils/uuidd.c:329
-#, c-format
-msgid "Error reading from client, len = %d\n"
-msgstr "從客戶端讀取時發生錯誤，長度 = %d\n"
+#: login-utils/chfn.c:452 login-utils/chsh.c:300
+msgid "Unknown user context"
+msgstr "不明的使用者相關環境"
-#: misc-utils/uuidd.c:338
-#, c-format
-msgid "operation %d, incoming num = %d\n"
-msgstr "操作 %d，即將來到的數字 = %d\n"
+#: login-utils/chfn.c:458 login-utils/chsh.c:306
+#, fuzzy, c-format
+msgid "can't set default context for %s"
+msgstr "無法設定預設語境用於 %s"
-#: misc-utils/uuidd.c:341
-#, c-format
-msgid "operation %d\n"
-msgstr "操作 %d\n"
+#: login-utils/chfn.c:469
+#, fuzzy
+msgid "running UID doesn't match UID of user we're altering, change denied"
+msgstr "執行中 UID 不匹配 UID 的使用者我們正在改變，命令殼變更拒絕"
-#: misc-utils/uuidd.c:357
+#: login-utils/chfn.c:473
#, c-format
-msgid "Generated time UUID: %s\n"
-msgstr "產生的時間 UUID：%s\n"
+msgid "Changing finger information for %s.\n"
+msgstr "修改 %s 的 finger 資訊。\n"
-#: misc-utils/uuidd.c:367
+#: login-utils/chfn.c:487
#, c-format
-msgid "Generated random UUID: %s\n"
-msgstr "產生的隨機 UUID：%s\n"
+msgid "Finger information not changed.\n"
+msgstr "Finger 資訊沒有變更。\n"
-#: misc-utils/uuidd.c:376
-#, fuzzy, c-format
-msgid "Generated time UUID %s and %d following\n"
-msgid_plural "Generated time UUID %s and %d following\n"
-msgstr[0] "產生的時間 UUID %s 和 %d 是依照\n"
+#: login-utils/chsh.c:78
+#, fuzzy
+msgid "Change your login shell.\n"
+msgstr "變更 %s 的 shell。\n"
-#: misc-utils/uuidd.c:397
-#, fuzzy, c-format
-msgid "Generated %d UUID:\n"
-msgid_plural "Generated %d UUIDs:\n"
-msgstr[0] "產生 %d UUIDs：\n"
+#: login-utils/chsh.c:81
+#, fuzzy
+msgid " -s, --shell <shell> specify login shell\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: misc-utils/uuidd.c:411
-#, c-format
-msgid "Invalid operation %d\n"
-msgstr "無效的操作 %d\n"
+#: login-utils/chsh.c:82
+#, fuzzy
+msgid " -l, --list-shells print list of shells and exit\n"
+msgstr " -l, --list-shells 列印命令殼清單的然後離開\n"
+
+#: login-utils/chsh.c:230
+#, fuzzy
+msgid "shell must be a full path name"
+msgstr "命令殼必須是完整路徑名稱"
-#: misc-utils/uuidd.c:423
+#: login-utils/chsh.c:232
#, fuzzy, c-format
-msgid "Unexpected reply length from server %d"
-msgstr "未預期從伺服器 %d 的回覆長度\n"
+msgid "\"%s\" does not exist"
+msgstr "「%s」不存在"
-#: misc-utils/uuidd.c:474 misc-utils/uuidd.c:500
-#, c-format
-msgid "Bad number: %s\n"
-msgstr "不當的數字：%s\n"
+#: login-utils/chsh.c:234
+#, fuzzy, c-format
+msgid "\"%s\" is not executable"
+msgstr "「%s」不是可執行檔案"
-#: misc-utils/uuidd.c:538 misc-utils/uuidd.c:566
+#: login-utils/chsh.c:240
#, fuzzy, c-format
-msgid "Error calling uuidd daemon (%s): %m\n"
-msgstr "呼叫 uuidd 守護程式 (%s) 時發生錯誤：%s\n"
+msgid "Warning: \"%s\" is not listed in %s."
+msgstr "警告：「%s」未被清單在中 %s。"
-#: misc-utils/uuidd.c:547
+#: login-utils/chsh.c:244 login-utils/chsh.c:248
#, fuzzy, c-format
-msgid "%s and %d subsequent UUID\n"
-msgid_plural "%s and %d subsequent UUIDs\n"
-msgstr[0] "%s 和後續的 %d UUIDs\n"
+msgid ""
+"\"%s\" is not listed in %s.\n"
+"Use %s -l to see list."
+msgstr ""
+"「%s」未被清單在中 %s。\n"
+"使用 %s -l 到參看清單。"
-#: misc-utils/uuidd.c:551
-#, c-format
-msgid "List of UUIDs:\n"
-msgstr "UUIDs 列表：\n"
+#: login-utils/chsh.c:299
+#, fuzzy, c-format
+msgid "%s is not authorized to change the shell of %s"
+msgstr "%s 未被授權到變更命令殼的 %s"
+
+#: login-utils/chsh.c:325
+#, fuzzy
+msgid "running UID doesn't match UID of user we're altering, shell change denied"
+msgstr "執行中 UID 不匹配 UID 的使用者我們正在改變，命令殼變更拒絕"
-#: misc-utils/uuidd.c:585
+#: login-utils/chsh.c:330
#, fuzzy, c-format
-msgid "Couldn't kill uuidd running at pid %d: %m\n"
-msgstr "無法砍除執行於 pid %d 的 uuidd：%s\n"
+msgid "your shell is not in %s, shell change denied"
+msgstr "您的命令殼不是在中 %s，命令殼變更拒絕"
-#: misc-utils/uuidd.c:590
+#: login-utils/chsh.c:334
#, c-format
-msgid "Killed uuidd running at pid %d\n"
-msgstr "已砍除執行於 pid %d 的 uuidd\n"
+msgid "Changing shell for %s.\n"
+msgstr "變更 %s 的 shell。\n"
-#: misc-utils/uuidgen.c:38
-msgid ""
-" -r, --random generate random-based uuid\n"
-" -t, --time generate time-based uuid\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
+#: login-utils/chsh.c:342
+msgid "New shell"
+msgstr "新命令殼"
-#: misc-utils/whereis.c:140
-#, fuzzy, c-format
-msgid " %s [options] file\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: login-utils/chsh.c:350
+#, fuzzy
+msgid "Shell not changed."
+msgstr "命令殼無法變更。"
-#: misc-utils/whereis.c:143
-msgid ""
-" -f <file> define search scope\n"
-" -b search only binaries\n"
-" -B <dirs> define binaries lookup path\n"
-" -m search only manual paths\n"
-" -M <dirs> define man lookup path\n"
-" -s search only sources path\n"
-" -S <dirs> define sources lookup path\n"
-" -u search from unusual enties\n"
-" -V output version information and exit\n"
-" -h display this help and exit\n"
-"\n"
+#: login-utils/chsh.c:355
+#, fuzzy
+msgid "Shell *NOT* changed. Try again later."
msgstr ""
+"setpwnam 失敗\n"
+"命令殼 * 無法 * 變更。 稍後再試一次。"
-#: misc-utils/whereis.c:154
-msgid "See how to use file and dirs arguments from whereis(1) manual.\n"
+#: login-utils/chsh.c:359
+#, fuzzy
+msgid ""
+"setpwnam failed\n"
+"Shell *NOT* changed. Try again later."
msgstr ""
+"setpwnam 失敗\n"
+"命令殼 * 無法 * 變更。 稍後再試一次。"
-#: misc-utils/wipefs.c:229
+#: login-utils/chsh.c:363
#, c-format
-msgid "error: %s: probing initialization failed"
-msgstr "錯誤：%s：試探初始化時失敗"
+msgid "Shell changed.\n"
+msgstr "shell 已變更。\n"
-#: misc-utils/wipefs.c:272
+#: login-utils/islocal.c:96
#, fuzzy, c-format
-msgid "failed to erase %s magic string at offset 0x%08jx"
-msgstr "%s：無法尋指到偏移值 0x%jx"
+msgid "Usage: %s <passwordfile> <username>...\n"
+msgstr "用法：%s [選項] [檔案...]\n"
-#: misc-utils/wipefs.c:277
+#: login-utils/last.c:169 login-utils/lslogins.c:1317 sys-utils/dmesg.c:1285
+#: sys-utils/lsipc.c:282
#, fuzzy, c-format
-msgid "%zd bytes were erased at offset 0x%08jx (%s): "
-msgstr "] 已清除於偏移值 0x%jx (%s)\n"
+msgid "unknown time format: %s"
+msgstr "不明動作：%s"
-#: misc-utils/wipefs.c:291
+#: login-utils/last.c:276 login-utils/last.c:284
#, fuzzy, c-format
-msgid "offset 0x%jx not found"
-msgstr "umount：%s: 找不到"
+msgid "Interrupted %s"
+msgstr ""
+"\n"
+"發生插斷 %10.10s %5.5s\n"
-#: misc-utils/wipefs.c:324
-#, c-format
-msgid "invalid offset value '%s' specified"
-msgstr "指定了無效的偏移值「%s」"
+#: login-utils/last.c:434 login-utils/last.c:445 login-utils/last.c:885
+msgid "preallocation size exceeded"
+msgstr ""
-#: misc-utils/wipefs.c:334 sys-utils/tunelp.c:80
+#: login-utils/last.c:564
#, fuzzy, c-format
-msgid " %s [options] <device>\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid " %s [options] [<username>...] [<tty>...]\n"
+msgstr " %s [選項] <user> [<ttyname>]\n"
-#: misc-utils/wipefs.c:337
-#, fuzzy
-msgid ""
-" -a, --all wipe all magic strings (BE CAREFUL!)\n"
-" -h, --help show this help text\n"
-" -n, --no-act do everything except the actual write() call\n"
-" -o, --offset <num> offset to erase, in bytes\n"
-" -p, --parsable print out in parsable instead of printable format\n"
-" -t, --types <list> limit the set of filesystem, RAIDs or partition tables\n"
-" -V, --version output version information and exit\n"
-msgstr ""
-" -a, --all 抹拭所有魔術字串 (請小心 !)\n"
-" -h, --help 顯示這個說明文字\n"
-" -n, --no-act 執行所有東西除了實際的 write() 呼叫\n"
-" -o, --offset <num> 要清除的偏移值，以位元組為單位\n"
-" -p, --parsable 以可剖析而非可列印的格式來印出\n"
-
-#: misc-utils/wipefs.c:345
-#, c-format
-msgid ""
-"\n"
-"For more information see wipefs(8).\n"
+#: login-utils/last.c:567
+msgid "Show a listing of last logged in users.\n"
msgstr ""
-"\n"
-"要獲得更多資訊請參看 wipefs(8)。\n"
-#: misc-utils/wipefs.c:405
-msgid "--offset and --all are mutually exclusive"
-msgstr "--offset 和 --all 彼此互斥"
+#: login-utils/last.c:570
+msgid " -<number> how many lines to show\n"
+msgstr ""
-#: misc-utils/wipefs.c:412
-msgid "only one device as argument is currently supported."
+#: login-utils/last.c:571
+msgid " -a, --hostlast display hostnames in the last column\n"
msgstr ""
-#: mount/fstab.c:145
-#, c-format
-msgid "warning: error reading %s: %s"
-msgstr "警告：讀取時發生錯誤 %s: %s"
+#: login-utils/last.c:572
+msgid " -d, --dns translate the IP number back into a hostname\n"
+msgstr ""
-#: mount/fstab.c:190
-#, fuzzy
-msgid "warning: failed to read mtab"
-msgstr "讀取時失敗：%s"
+#: login-utils/last.c:574
+#, fuzzy, c-format
+msgid " -f, --file <file> use a specific file instead of %s\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
-#: mount/fstab.c:218 mount/fstab.c:244
-#, c-format
-msgid "warning: can't open %s: %s"
-msgstr "警告：無法開啟 %s: %s"
+#: login-utils/last.c:575
+msgid " -F, --fulltimes print full login and logout times and dates\n"
+msgstr ""
-#: mount/fstab.c:223
-#, c-format
-msgid "mount: could not open %s - using %s instead\n"
-msgstr "mount：無法開啟 %s - 使用 %s 做為替代\n"
+#: login-utils/last.c:576
+#, fuzzy
+msgid " -i, --ip display IP numbers in numbers-and-dots notation\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: mount/fstab.c:680
-#, c-format
-msgid "can't create lock file %s: %s (use -n flag to override)"
-msgstr "無法建立鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+#: login-utils/last.c:577
+msgid " -n, --limit <number> how many lines to show\n"
+msgstr ""
-#: mount/fstab.c:706
-#, c-format
-msgid "can't link lock file %s: %s (use -n flag to override)"
-msgstr "無法鏈結鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+#: login-utils/last.c:578
+#, fuzzy
+msgid " -R, --nohostname don't display the hostname field\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
-#: mount/fstab.c:722
-#, c-format
-msgid "can't open lock file %s: %s (use -n flag to override)"
-msgstr "無法開啟鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+#: login-utils/last.c:579
+#, fuzzy
+msgid " -s, --since <time> display the lines since the specified time\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: mount/fstab.c:737
-#, c-format
-msgid "Can't lock lock file %s: %s\n"
-msgstr "無法鎖定已鎖定檔案 %s: %s\n"
+#: login-utils/last.c:580
+#, fuzzy
+msgid " -t, --until <time> display the lines until the specified time\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: mount/fstab.c:751
-#, c-format
-msgid "can't lock lock file %s: %s"
-msgstr "無法鎖定已鎖定檔案 %s: %s"
+#: login-utils/last.c:581
+msgid " -p, --present <time> display who were present at the specified time\n"
+msgstr ""
-#: mount/fstab.c:753
-msgid "timed out"
-msgstr "已逾時"
+#: login-utils/last.c:582
+#, fuzzy
+msgid " -w, --fullnames display full user and domain names\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: mount/fstab.c:760
-#, c-format
-msgid ""
-"Cannot create link %s\n"
-"Perhaps there is a stale lock file?\n"
+#: login-utils/last.c:583
+msgid " -x, --system display system shutdown entries and run level changes\n"
msgstr ""
-"無法建立鏈結 %s\n"
-"也許有失去時效的鎖定檔案？\n"
-
-#: mount/fstab.c:902 mount/fstab.c:959
-#, c-format
-msgid "cannot open %s (%s) - mtab not updated"
-msgstr "無法開啟 %s (%s) - mtab 尚未更新"
-#: mount/fstab.c:967
-#, c-format
-msgid "error writing %s: %s"
-msgstr "寫入 %s 時發生錯誤：%s"
+#: login-utils/last.c:584
+msgid ""
+" --time-format <format> show timestamps in the specified <format>:\n"
+" notime|short|full|iso\n"
+msgstr ""
-#: mount/fstab.c:982
+#: login-utils/last.c:886
#, fuzzy, c-format
-msgid "%s: cannot fflush changes: %s"
-msgstr "%s：無法鏈結 %s: %s\n"
-
-#: mount/fstab.c:999
-#, c-format
-msgid "error changing mode of %s: %s\n"
-msgstr "變更 %s 模式時發生錯誤：%s\n"
-
-#: mount/fstab.c:1012
-#, c-format
-msgid "error changing owner of %s: %s\n"
-msgstr "變更 %s 的擁有者時發生錯誤：%s\n"
-
-#: mount/fstab.c:1023
-#, c-format
-msgid "can't rename %s to %s: %s\n"
-msgstr "無法重新命名 %s 為 %s: %s\n"
-
-#: mount/mount.c:325
-#, c-format
msgid ""
"\n"
-"mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
-" It's possible that information reported by mount(8) is not\n"
-" up to date. For actual information about system mount points\n"
-" check the /proc/mounts file.\n"
-"\n"
+"%s begins %s\n"
msgstr ""
"\n"
-"mount：警告：/etc/mtab 不可寫入 (例：唯讀檔案系統)。\n"
-" 由 mount(8) 所報告的資訊有可能不是最新狀況。\n"
-" 想要獲得有關系統掛載點的實際資訊，\n"
-" 請檢查 /proc/mounts 檔案。\n"
-"\n"
+"wtmp 開始 %s"
-#: mount/mount.c:375
-#, c-format
-msgid "mount: improperly quoted option string '%s'"
-msgstr "mount：選項字串「%s」加入了不適當的引號"
+#: login-utils/last.c:964 term-utils/scriptlive.c:85 term-utils/scriptlive.c:89
+#: term-utils/scriptreplay.c:79 term-utils/scriptreplay.c:83
+#, fuzzy
+msgid "failed to parse number"
+msgstr "剖析列號的時失敗"
-#: mount/mount.c:408
-#, c-format
-msgid "mount: translated %s '%s' to '%s'\n"
-msgstr "mount：已翻譯 %s「%s」為「%s」\n"
+#: login-utils/last.c:985 login-utils/last.c:990 login-utils/last.c:995
+#: sys-utils/rtcwake.c:508
+#, fuzzy, c-format
+msgid "invalid time value \"%s\""
+msgstr "無效的逾時引數"
-#: mount/mount.c:465
-#, c-format
-msgid "mount: SELinux *context= options are ignore on remount.\n"
+#: login-utils/libuser.c:29 login-utils/libuser.c:31
+msgid "Couldn't drop group privileges"
msgstr ""
-#: mount/mount.c:660
-#, c-format
-msgid "mount: according to mtab, %s is already mounted on %s"
-msgstr "mount：根據 mtab，%s 已經掛載到 %s"
+#: login-utils/libuser.c:47
+#, fuzzy, c-format
+msgid "libuser initialization failed: %s."
+msgstr "群組初始化失敗：%m"
-#: mount/mount.c:665
-#, c-format
-msgid "mount: according to mtab, %s is mounted on %s"
-msgstr "mount：根據 mtab，%s 已經掛載到 %s"
+#: login-utils/libuser.c:52
+#, fuzzy
+msgid "changing user attribute failed"
+msgstr "變更 %s 模式失敗"
-#: mount/mount.c:689
+#: login-utils/libuser.c:66
#, c-format
-msgid "mount: can't open %s for writing: %s"
-msgstr "mount：無法開啟 %s 以用於寫入：%s"
+msgid "user attribute not changed: %s"
+msgstr ""
-#: mount/mount.c:706
-#, c-format
-msgid "mount: error writing %s: %s"
-msgstr "mount：寫入時發生錯誤 %s: %s"
+#: login-utils/login.c:293
+#, fuzzy, c-format
+msgid "FATAL: can't reopen tty: %m"
+msgstr "嚴重：無法重新開啟 tty：%m"
-#: mount/mount.c:714
+#: login-utils/login.c:299
#, c-format
-msgid "mount: error changing mode of %s: %s"
-msgstr "mount：變更模式時發生錯誤 %s: %s"
+msgid "FATAL: %s is not a terminal"
+msgstr "嚴重：%s 並非終端機"
-#: mount/mount.c:820
+#: login-utils/login.c:317
#, fuzzy, c-format
-msgid "mount: cannot set group id: %m"
-msgstr "mount：無法設定群組識別編號：%s"
+msgid "chown (%s, %lu, %lu) failed: %m"
+msgstr "chown (%s，%lu，%lu) 失敗：%m"
-#: mount/mount.c:823
+#: login-utils/login.c:321
#, fuzzy, c-format
-msgid "mount: cannot set user id: %m"
-msgstr "mount：無法設定使用者識別編號：%s"
-
-#: mount/mount.c:870 mount/mount.c:2289
-#, c-format
-msgid "mount: cannot fork: %s"
-msgstr "mount：無法衍生執行：%s"
+msgid "chmod (%s, %u) failed: %m"
+msgstr "chmod (%s，%u) 失敗：%m"
-#: mount/mount.c:1006
-#, c-format
-msgid "Trying %s\n"
-msgstr "嘗試 %s\n"
+#: login-utils/login.c:382
+msgid "FATAL: bad tty"
+msgstr "嚴重：不當的 tty"
-#: mount/mount.c:1034
-#, c-format
-msgid "mount: you didn't specify a filesystem type for %s\n"
-msgstr "mount：您並未指定 %s 的檔案系統類型\n"
+#: login-utils/login.c:400
+#, fuzzy, c-format
+msgid "FATAL: %s: change permissions failed: %m"
+msgstr "嚴重：%s：變更權限失敗：%m"
-#: mount/mount.c:1037
+#: login-utils/login.c:529
#, c-format
-msgid " I will try all types mentioned in %s or %s\n"
-msgstr " 我將嘗試所有在 %s 或 %s 中提及的類型\n"
+msgid "Last login: %.*s "
+msgstr "上次登入：%.*s "
-#: mount/mount.c:1040
+#: login-utils/login.c:531
#, c-format
-msgid " and it looks like this is swapspace\n"
-msgstr " 而它看起來像是個置換空間\n"
+msgid "from %.*s\n"
+msgstr "從 %.*s\n"
-#: mount/mount.c:1042
+#: login-utils/login.c:534
#, c-format
-msgid " I will try type %s\n"
-msgstr " 我將嘗試類型 %s\n"
+msgid "on %.*s\n"
+msgstr "於 %.*s\n"
-#: mount/mount.c:1067
-#, c-format
-msgid "%s looks like swapspace - not mounted"
-msgstr "%s 看起來像是置換空間 - 未掛載"
+#: login-utils/login.c:552
+#, fuzzy
+msgid "write lastlog failed"
+msgstr "寫入 lastlog 失敗"
-#: mount/mount.c:1075
+#: login-utils/login.c:643
#, c-format
-msgid ""
-"mount: %s: more filesystems detected. This should not happen,\n"
-" use -t <type> to explicitly specify the filesystem type or\n"
-" use wipefs(8) to clean up the device.\n"
-msgstr ""
-"掛載：%s：偵測到多個檔案系統。這不應發生，\n"
-" 使用 -t <type> 以明確指定檔案系統型態或\n"
-" 使用 wipefs(8) 以清理裝置。\n"
-
-#: mount/mount.c:1163
-msgid "mount failed"
-msgstr "掛載失敗"
+msgid "DIALUP AT %s BY %s"
+msgstr "由 %2$s 於 %1$s 撥號進入"
-#: mount/mount.c:1165
+#: login-utils/login.c:648
#, c-format
-msgid "mount: only root can mount %s on %s"
-msgstr "mount：只有 root 可以將 %s 掛載到 %s"
-
-#: mount/mount.c:1254
-msgid "mount: loop device specified twice"
-msgstr "mount：環路裝置被指定了兩次"
-
-#: mount/mount.c:1259
-msgid "mount: type specified twice"
-msgstr "mount：類型被指定了兩次"
+msgid "ROOT LOGIN ON %s FROM %s"
+msgstr "從 %2$s 於 %1$s 登入為系統管理員"
-#: mount/mount.c:1287
+#: login-utils/login.c:651
#, c-format
-msgid "mount: skipping the setup of a loop device\n"
-msgstr "mount：跳過環路裝置的設定\n"
-
-#: mount/mount.c:1298
-#, fuzzy, c-format
-msgid "mount: enabling autoclear loopdev flag\n"
-msgstr "mount：即將使用環路裝置 %s\n"
+msgid "ROOT LOGIN ON %s"
+msgstr "系統管理員於 %s 登入"
-#: mount/mount.c:1306
+#: login-utils/login.c:654
#, c-format
-msgid "mount: invalid offset '%s' specified"
-msgstr "mount：指定了無效的偏移值「%s」"
+msgid "LOGIN ON %s BY %s FROM %s"
+msgstr "由 %2$s 從 %3$s 於 %1$s 登入"
-#: mount/mount.c:1310
+#: login-utils/login.c:657
#, c-format
-msgid "mount: invalid sizelimit '%s' specified"
-msgstr "mount：指定了無效的大小限制「%s」"
+msgid "LOGIN ON %s BY %s"
+msgstr "由 %2$s 於 %1$s 登入"
-#: mount/mount.c:1315
-#, c-format
-msgid "mount: according to mtab %s is already mounted on %s as loop"
-msgstr "mount：根據 mtab %s 已被當做環路而掛載於 %s"
+#: login-utils/login.c:691
+msgid "login: "
+msgstr "登入："
-#: mount/mount.c:1332
-#, fuzzy
-msgid "mount: failed to found free loop device"
-msgstr "mount：設定環路裝置時失敗\n"
+#: login-utils/login.c:722
+#, fuzzy, c-format
+msgid "PAM failure, aborting: %s"
+msgstr "PAM 失敗，放棄：%s"
-#: mount/mount.c:1337
+#: login-utils/login.c:723
#, c-format
-msgid "mount: going to use the loop device %s\n"
-msgstr "mount：即將使用環路裝置 %s\n"
+msgid "Couldn't initialize PAM: %s"
+msgstr "無法初始化 PAM：%s"
-#: mount/mount.c:1349
+#: login-utils/login.c:793
#, fuzzy, c-format
-msgid "mount: %s: failed to set loopdev attributes"
-msgstr "å\8f\96å¾\97 pid %d ç\9a\84屬æ\80§æ\99\82失æ\95\97"
+msgid "FAILED LOGIN %u FROM %s FOR %s, %s"
+msgstr "失æ\95\97ç\9a\84ç\99»å\85¥ %u å¾\9e %s ç\94¨æ\96¼ %sï¼\8c%s"
-#: mount/mount.c:1361
+#: login-utils/login.c:801 login-utils/sulogin.c:1013
#, c-format
-msgid "mount: failed setting up loop device\n"
-msgstr "mount：設定環路裝置時失敗\n"
-
-#: mount/mount.c:1372
-#, c-format
-msgid "mount: stolen loop=%s ...trying again\n"
-msgstr "mount：丟失環路=%s ...再試一次\n"
+msgid ""
+"Login incorrect\n"
+"\n"
+msgstr ""
+"登入不正確\n"
+"\n"
-#: mount/mount.c:1377
-#, c-format
-msgid "mount: stolen loop=%s"
-msgstr "mount：丟失環路=%s"
+#: login-utils/login.c:816
+#, fuzzy, c-format
+msgid "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"
+msgstr "太多登入嘗試 (%u) 從 %s 用於 %s，%s"
-#: mount/mount.c:1384
+#: login-utils/login.c:822
#, c-format
-msgid "mount: setup loop device successfully\n"
-msgstr "mount：成功設定環路裝置\n"
+msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
+msgstr "失敗的登入執行階段自 %s 用於 %s, %s"
-#: mount/mount.c:1475 mount/mount.c:1507
+#: login-utils/login.c:830
#, c-format
-msgid "mount: no %s found - creating it..\n"
-msgstr "mount：找不到 %s - 建立它…\n"
+msgid ""
+"\n"
+"Login incorrect\n"
+msgstr ""
+"\n"
+"登入錯誤\n"
+
+#: login-utils/login.c:858 login-utils/login.c:1247 login-utils/login.c:1270
+#, fuzzy
+msgid ""
+"\n"
+"Session setup problem, abort."
+msgstr ""
+"\n"
+"作業階段設定問題，放棄。"
-#: mount/mount.c:1530
-msgid "mount: argument to -p or --pass-fd must be a number"
-msgstr "mount：-p 或 --pass-fd 的引數必須是數字"
+#: login-utils/login.c:859
+#, fuzzy
+msgid "NULL user name. Abort."
+msgstr "在 %s:%d 中包含空使用者名稱，放棄。"
-#: mount/mount.c:1543
+#: login-utils/login.c:997
#, c-format
-msgid "mount: cannot open %s for setting speed"
-msgstr "mount：無法開啟 %s 以用於設定速度"
+msgid "TIOCSCTTY failed: %m"
+msgstr "TIOCSCTTY 失敗：%m"
-#: mount/mount.c:1546
+#: login-utils/login.c:1101
#, fuzzy, c-format
-msgid "mount: cannot set speed: %m"
-msgstr "mount：無法設定速度：%s"
-
-#: mount/mount.c:1637
-#, c-format
-msgid "mount: according to mtab, %s is already mounted on %s\n"
-msgstr "mount：根據 mtab，%s 已經掛載到 %s\n"
+msgid " %s [-p] [-h <host>] [-H] [[-f] <username>]\n"
+msgstr "用法：登入 [-p] [-h 主機] [-H] [-f 使用者名稱|使用者名稱]\n"
-#: mount/mount.c:1724
-#, c-format
-msgid "mount: warning: %s seems to be mounted read-write.\n"
-msgstr "mount：警告：%s 似乎被掛載為可讀可寫。\n"
+#: login-utils/login.c:1103
+#, fuzzy
+msgid "Begin a session on the system.\n"
+msgstr "您正在這個系統中使用陰影密碼。\n"
-#: mount/mount.c:1736
-#, c-format
-msgid "mount: warning: %s seems to be mounted read-only.\n"
-msgstr "mount：警告：%s 似乎被掛載為唯讀。\n"
+#: login-utils/login.c:1106
+#, fuzzy
+msgid " -p do not destroy the environment"
+msgstr " -f 不分割長列\n"
-#: mount/mount.c:1777
-msgid ""
-"mount: I could not determine the filesystem type, and none was specified"
-msgstr "mount：我無法決定檔案系統類型，而它並未被指定"
+#: login-utils/login.c:1107
+msgid " -f skip a second login authentication"
+msgstr ""
-#: mount/mount.c:1780
-msgid "mount: you must specify the filesystem type"
-msgstr "mount：您必須指定檔案系統類型"
+#: login-utils/login.c:1108
+msgid " -h <host> hostname to be used for utmp logging"
+msgstr ""
-#: mount/mount.c:1783
-msgid "mount: mount failed"
-msgstr "mount：掛載時失敗"
+#: login-utils/login.c:1109
+#, fuzzy
+msgid " -H suppress hostname in the login prompt"
+msgstr " -e 不暫停於結束的檔案\n"
-#: mount/mount.c:1789 mount/mount.c:1826
-#, c-format
-msgid "mount: mount point %s is not a directory"
-msgstr "mount：掛載點 %s 並非目錄"
+#: login-utils/login.c:1155
+#, fuzzy, c-format
+msgid "%s: timed out after %u seconds"
+msgstr "已逾時之後 %u 秒"
-#: mount/mount.c:1791
-msgid "mount: permission denied"
-msgstr "mount：權限被拒"
+#: login-utils/login.c:1188
+#, fuzzy, c-format
+msgid "login: -h is for superuser only\n"
+msgstr "login：-h 只提供系統管理者使用。\n"
-#: mount/mount.c:1793
-msgid "mount: must be superuser to use mount"
-msgstr "mount：必須是系統管理者才能使用掛載"
+#: login-utils/login.c:1248
+#, fuzzy, c-format
+msgid "Invalid user name \"%s\". Abort."
+msgstr "無效的使用者名稱「%s」於 %s:%d，放棄。"
-#: mount/mount.c:1797 mount/mount.c:1801
-#, c-format
-msgid "mount: %s is busy"
-msgstr "mount：%s 忙碌中"
+#: login-utils/login.c:1269
+#, fuzzy, c-format
+msgid "groups initialization failed: %m"
+msgstr "群組初始化失敗：%m"
-#: mount/mount.c:1803
-msgid "mount: proc already mounted"
-msgstr "mount：proc 已被掛載"
+#: login-utils/login.c:1294 sys-utils/mount.c:57 sys-utils/umount.c:122
+#, fuzzy
+msgid "setgid() failed"
+msgstr "setgid() 失敗"
-#: mount/mount.c:1805
+#: login-utils/login.c:1324
#, c-format
-msgid "mount: %s already mounted or %s busy"
-msgstr "mount：%s 已被掛載或者 %s 忙碌中"
+msgid "You have new mail.\n"
+msgstr "您有新郵件。\n"
-#: mount/mount.c:1811
+#: login-utils/login.c:1326
#, c-format
-msgid "mount: mount point %s does not exist"
-msgstr "mount：掛載點 %s 不存在"
+msgid "You have mail.\n"
+msgstr "您有郵件。\n"
-#: mount/mount.c:1813
-#, c-format
-msgid "mount: mount point %s is a symbolic link to nowhere"
-msgstr "mount：掛載點 %s 是不明位置的符號連結"
+#: login-utils/login.c:1340 sys-utils/mount.c:60 sys-utils/umount.c:125
+msgid "setuid() failed"
+msgstr "setuid() 失敗"
-#: mount/mount.c:1818
-#, c-format
-msgid "mount: special device %s does not exist"
-msgstr "mount：特殊裝置 %s 不存在"
+#: login-utils/login.c:1346 login-utils/sulogin.c:731
+#, fuzzy, c-format
+msgid "%s: change directory failed"
+msgstr "%s：變更目錄失敗"
-#: mount/mount.c:1830
+#: login-utils/login.c:1353 login-utils/sulogin.c:732
#, c-format
-msgid ""
-"mount: special device %s does not exist\n"
-" (a path prefix is not a directory)\n"
-msgstr ""
-"mount：特殊裝置 %s 不存在\n"
-" (路徑前綴並非目錄)\n"
+msgid "Logging in with home = \"/\".\n"
+msgstr "登入時個人資料夾=「/」。\n"
+
+#: login-utils/login.c:1379
+#, fuzzy
+msgid "couldn't exec shell script"
+msgstr "無法 exec 命令稿"
+
+#: login-utils/login.c:1381
+#, fuzzy
+msgid "no shell"
+msgstr "沒有命令殼"
-#: mount/mount.c:1842
+#: login-utils/logindefs.c:213
#, fuzzy, c-format
-msgid "mount: %s not mounted or bad option"
-msgstr "mount：%s 未被掛載，或是不當的選項"
+msgid "%s: %s contains invalid numerical value: %s"
+msgstr "%s：%s 含有無效的數值：%s"
-#: mount/mount.c:1844
-#, c-format
-msgid ""
-"mount: wrong fs type, bad option, bad superblock on %s,\n"
-" missing codepage or helper program, or other error"
+#: login-utils/logindefs.c:383
+msgid "hush login status: restore original IDs failed"
msgstr ""
-"mount：錯誤檔案系統類型、不當的選項、不當的超區塊於 %s,\n"
-" 缺少編碼頁或輔助程式，或其他錯誤"
-#: mount/mount.c:1851
-msgid ""
-" (for several filesystems (e.g. nfs, cifs) you might\n"
-" need a /sbin/mount.<type> helper program)"
-msgstr ""
-" (對於許多檔案系統 (例如 nfs，cifs) 您也許\n"
-" 需要 /sbin/mount.<type> 輔助程式)"
+#: login-utils/lslogins.c:210 sys-utils/lscpu.c:1584 sys-utils/lscpu.c:1594
+#: sys-utils/lsmem.c:266
+msgid "no"
+msgstr "否"
-#: mount/mount.c:1860
-msgid ""
-" (could this be the IDE device where you in fact use\n"
-" ide-scsi so that sr0 or sda or so is needed?)"
-msgstr ""
-" (是否可能您使用 IDE 裝置其實是\n"
-" ide-scsi 因而需要 sr0 或 sda 之類裝置?)"
+#: login-utils/lslogins.c:219 misc-utils/lsblk.c:188
+#, fuzzy
+msgid "user name"
+msgstr "使用者名稱"
-#: mount/mount.c:1865
-msgid ""
-" (aren't you trying to mount an extended partition,\n"
-" instead of some logical partition inside?)"
+#: login-utils/lslogins.c:219
+#, fuzzy
+msgid "Username"
+msgstr "使用者名稱"
+
+#: login-utils/lslogins.c:220 sys-utils/renice.c:54
+#, fuzzy
+msgid "user ID"
+msgstr "使用者識別號"
+
+#: login-utils/lslogins.c:221
+msgid "password not required"
msgstr ""
-" (您是否試著掛載擴充分割區，\n"
-" 而非其中的邏輯分割區 ?)"
-#: mount/mount.c:1872
-msgid ""
-" In some cases useful info is found in syslog - try\n"
-" dmesg | tail or so\n"
+#: login-utils/lslogins.c:221
+msgid "Password not required"
msgstr ""
-" 在某些狀況下，syslog 中可以找到有用的資訊 - 嘗試\n"
-" dmesg | tail 之類命令\n"
-#: mount/mount.c:1878 sys-utils/mount.c:469
-msgid "mount table full"
-msgstr "掛載表已滿"
+#: login-utils/lslogins.c:222
+#, fuzzy
+msgid "login by password disabled"
+msgstr "%s：Root 密碼錯亂"
-#: mount/mount.c:1880
-#, c-format
-msgid "mount: %s: can't read superblock"
-msgstr "mount：%s: 無法讀取超區塊"
+#: login-utils/lslogins.c:222
+#, fuzzy
+msgid "Login by password disabled"
+msgstr "%s：Root 密碼錯亂"
-#: mount/mount.c:1886
-#, c-format
-msgid "mount: %s: unknown device"
-msgstr "mount：%s: 不明的裝置"
+#: login-utils/lslogins.c:223
+msgid "password defined, but locked"
+msgstr ""
-#: mount/mount.c:1891
-#, c-format
-msgid "mount: unknown filesystem type '%s'"
-msgstr "mount：不明的檔案系統類型「%s」"
+#: login-utils/lslogins.c:223
+#, fuzzy
+msgid "Password is locked"
+msgstr "密碼："
-#: mount/mount.c:1903
-#, c-format
-msgid "mount: probably you meant %s"
-msgstr "mount：您的意思大概是 %s"
+#: login-utils/lslogins.c:224
+#, fuzzy
+msgid "password encryption method"
+msgstr "密碼："
-#: mount/mount.c:1906
-msgid "mount: maybe you meant 'iso9660'?"
-msgstr "mount：也許您的意思是「iso9660」？"
+#: login-utils/lslogins.c:224
+#, fuzzy
+msgid "Password encryption method"
+msgstr "密碼："
-#: mount/mount.c:1909
-msgid "mount: maybe you meant 'vfat'?"
-msgstr "mount：也許您的意思是「vfat」？"
+#: login-utils/lslogins.c:225
+msgid "log in disabled by nologin(8) or pam_nologin(8)"
+msgstr ""
-#: mount/mount.c:1912
-#, c-format
-msgid "mount: %s has wrong device number or fs type %s not supported"
-msgstr "mount：%s 有錯誤的裝置編號，或是不支援檔案系統類型 %s"
+#: login-utils/lslogins.c:225
+#, fuzzy
+msgid "No login"
+msgstr "登入："
-#: mount/mount.c:1920
-#, c-format
-msgid "mount: %s is not a block device, and stat fails?"
-msgstr "mount：%s 並非一個區塊裝置，而且取得狀態時失敗？"
+#: login-utils/lslogins.c:226
+#, fuzzy
+msgid "primary group name"
+msgstr "群組名稱"
-#: mount/mount.c:1922
-#, c-format
-msgid ""
-"mount: the kernel does not recognize %s as a block device\n"
-" (maybe `modprobe driver'?)"
-msgstr ""
-"mount：內核無法識別 %s 為一個區塊裝置\n"
-" (也許要用「modprobe driver」?)"
+#: login-utils/lslogins.c:226
+#, fuzzy
+msgid "Primary group"
+msgstr "主要的"
-#: mount/mount.c:1925
-#, c-format
-msgid "mount: %s is not a block device (maybe try `-o loop'?)"
-msgstr "mount：%s 並非一個區塊裝置 (也許試試「-o loop」?)"
+#: login-utils/lslogins.c:227
+#, fuzzy
+msgid "primary group ID"
+msgstr "處理群組識別號"
-#: mount/mount.c:1928
-#, c-format
-msgid "mount: %s is not a block device"
-msgstr "mount：%s 並非一個區塊裝置"
+#: login-utils/lslogins.c:228
+msgid "supplementary group names"
+msgstr ""
-#: mount/mount.c:1933
-#, c-format
-msgid "mount: %s is not a valid block device"
-msgstr "mount：%s 並非有效的區塊裝置"
+#: login-utils/lslogins.c:228
+msgid "Supplementary groups"
+msgstr ""
-#: mount/mount.c:1936
-msgid "block device "
-msgstr "區塊裝置 "
+#: login-utils/lslogins.c:229
+msgid "supplementary group IDs"
+msgstr ""
-#: mount/mount.c:1938
-#, c-format
-msgid "mount: cannot mount %s%s read-only"
-msgstr "mount：無法以唯讀方式掛載 %s%s"
+#: login-utils/lslogins.c:229
+msgid "Supplementary group IDs"
+msgstr ""
-#: mount/mount.c:1942
-#, c-format
-msgid "mount: %s%s is write-protected but explicit `-w' flag given"
-msgstr "mount：%s%s 為防寫，但卻明確給定了「-w」旗標"
+#: login-utils/lslogins.c:230
+#, fuzzy
+msgid "home directory"
+msgstr "目錄 %s 不存在！\n"
-#: mount/mount.c:1946
-#, c-format
-msgid "mount: cannot remount %s%s read-write, is write-protected"
-msgstr "mount：無法重新將 %s%s 掛載成可讀可寫，其為防寫的"
+#: login-utils/lslogins.c:230
+#, fuzzy
+msgid "Home directory"
+msgstr "目錄 %s 不存在！\n"
-#: mount/mount.c:1961
-#, c-format
-msgid "mount: %s%s is write-protected, mounting read-only"
-msgstr "mount：%s%s 為防寫，即將以唯讀方式掛載"
+#: login-utils/lslogins.c:231
+#, fuzzy
+msgid "login shell"
+msgstr "沒有命令殼"
-#: mount/mount.c:1969
-#, c-format
-msgid "mount: no medium found on %s"
-msgstr "mount：%s 中找不到任何媒體"
+#: login-utils/lslogins.c:231
+#, fuzzy
+msgid "Shell"
+msgstr "沒有命令殼"
-#: mount/mount.c:1987 sys-utils/mount.c:278
-#, c-format
-msgid ""
-"mount: %s does not contain SELinux labels.\n"
-" You just mounted an file system that supports labels which does not\n"
-" contain labels, onto an SELinux box. It is likely that confined\n"
-" applications will generate AVC messages and not be allowed access to\n"
-" this file system. For more details see restorecon(8) and mount(8).\n"
+#: login-utils/lslogins.c:232
+#, fuzzy
+msgid "full user name"
+msgstr "使用者名稱"
+
+#: login-utils/lslogins.c:232
+msgid "Gecos field"
msgstr ""
-"mount：%s 不包含 SELinux 標籤。\n"
-" 您剛掛載了支援標籤的檔案系統，它卻在 SELinux 框上\n"
-" 不包含標籤。似乎受限的應用程式\n"
-" 將產生 AVC 訊息，並且不被允許去存取\n"
-" 這個檔案系統。要獲得更多細節請參看 restorecon(8) 和 mount(8)。\n"
-#: mount/mount.c:2067
-#, c-format
-msgid "mount: no type was given - I'll assume nfs because of the colon\n"
-msgstr "mount：沒有給定任何類型 - 我將因為冒號而假設是 nfs\n"
+#: login-utils/lslogins.c:233
+#, fuzzy
+msgid "date of last login"
+msgstr "略過第一列"
-#: mount/mount.c:2073
-#, c-format
-msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
-msgstr "mount：沒有給定任何類型 - 我將因為 // 前綴而假設是 cifs\n"
+#: login-utils/lslogins.c:233
+#, fuzzy
+msgid "Last login"
+msgstr "上次登入：%.*s "
-#: mount/mount.c:2177
-#, c-format
-msgid "mount: ignore %s (unparsable offset= option)\n"
+#: login-utils/lslogins.c:234
+msgid "last tty used"
msgstr ""
-#: mount/mount.c:2190
-#, c-format
-msgid "mount: %s already mounted on %s\n"
-msgstr "mount：%s 已經掛載到 %s\n"
-
-#: mount/mount.c:2371
-#, c-format
-msgid ""
-"Usage: mount -V : print version\n"
-" mount -h : print this help\n"
-" mount : list mounted filesystems\n"
-" mount -l : idem, including volume labels\n"
-"So far the informational part. Next the mounting.\n"
-"The command is `mount [-t fstype] something somewhere'.\n"
-"Details found in /etc/fstab may be omitted.\n"
-" mount -a [-t|-O] ... : mount all stuff from /etc/fstab\n"
-" mount device : mount device at the known place\n"
-" mount directory : mount known device here\n"
-" mount -t type dev dir : ordinary mount command\n"
-"Note that one does not really mount a device, one mounts\n"
-"a filesystem (of the given type) found on the device.\n"
-"One can also mount an already visible directory tree elsewhere:\n"
-" mount --bind olddir newdir\n"
-"or move a subtree:\n"
-" mount --move olddir newdir\n"
-"One can change the type of mount containing the directory dir:\n"
-" mount --make-shared dir\n"
-" mount --make-slave dir\n"
-" mount --make-private dir\n"
-" mount --make-unbindable dir\n"
-"One can change the type of all the mounts in a mount subtree\n"
-"containing the directory dir:\n"
-" mount --make-rshared dir\n"
-" mount --make-rslave dir\n"
-" mount --make-rprivate dir\n"
-" mount --make-runbindable dir\n"
-"A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
-"or by label, using -L label or by uuid, using -U uuid .\n"
-"Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
-"For many more details, say man 8 mount .\n"
-msgstr ""
-"用法：mount -V ：印出版本\n"
-" mount -h ：印出這個說明\n"
-" mount ：列出掛載的檔案系統\n"
-" mount -l ：idem，包含卷冊標籤\n"
-"目前為止是有關資訊部分。下列有關掛載。\n"
-"命令為「mount [-t fstype] something somewhere」。\n"
-"在 /etc/fstab 中找到的細節也許會被省略。\n"
-" mount -a [-t|-O]… ：依據 /etc/fstab 掛載所有項目\n"
-" mount device ：於已知位置掛載裝置\n"
-" mount directory ：在此掛載已知裝置\n"
-" mount -t type dev dir ：標準的掛載命令\n"
-"要注意的是，並非真正地掛載裝置，而是掛載一個\n"
-"在裝置中找到的檔案系統 (給定的類型)。\n"
-"已經可見的目錄樹也可以被掛載到其他地方：\n"
-" mount --bind olddir newdir\n"
-"或是移動子樹：\n"
-" mount --move olddir newdir\n"
-"也可以變更包含目錄 dir 的掛載類型：\n"
-" mount --make-shared dir\n"
-" mount --make-slave dir\n"
-" mount --make-private dir\n"
-" mount --make-unbindable dir\n"
-"包含目錄 dir 的掛載子樹中所有掛載的類型\n"
-"都可以變更：\n"
-" mount --make-rshared dir\n"
-" mount --make-rslave dir\n"
-" mount --make-rprivate dir\n"
-" mount --make-runbindable dir\n"
-"裝置可以由名稱給定，例如 /dev/hda1 或 /dev/cdrom，\n"
-"或是利用 -L label 經由標籤，或是利用 -U uuid 而經由 uuid。\n"
-"其他選項：[-nfFrsvw] [-o options] [-p passwdfd]。\n"
-"要獲得更多細節，就用 man 8 mount。\n"
-
-#: mount/mount.c:2703
-#, c-format
-msgid "mount: only root can do that (effective UID is %u)"
-msgstr "mount：只有 root 可以那樣做 (有效 UID 是 %u)"
-
-#: mount/mount.c:2706
-msgid "mount: only root can do that"
-msgstr "mount：只有 root 可以那樣做"
-
-#: mount/mount.c:2717
-msgid "nothing was mounted"
-msgstr "沒有掛載任何東西"
-
-#: mount/mount.c:2735 mount/mount.c:2761
-msgid "mount: no such partition found"
-msgstr "mount：找不到此類分割"
-
-#: mount/mount.c:2738
-#, c-format
-msgid "mount: can't find %s in %s or %s"
-msgstr "mount：無法在 %2$s 或 %3$s 中找到 %1$s"
-
-#: mount/mount_mntent.c:108
-#, c-format
-msgid "[mntent]: warning: no final newline at the end of %s\n"
-msgstr "[mntent]：警告：在 %s 的結尾沒有最後的換列字元\n"
-
-#: mount/mount_mntent.c:158
-#, c-format
-msgid "[mntent]: line %d in %s is bad%s\n"
-msgstr "[mntent]：在 %2$s 中的第 %1$d 列是不當的 %3$s\n"
-
-#: mount/mount_mntent.c:161
-msgid "; rest of file ignored"
-msgstr "；忽略檔案的其餘部份"
-
-#: mount/sundries.c:30
-msgid "bug in xstrndup call"
-msgstr "在 xstrndup 呼叫中有程式錯誤"
-
-#: mount/sundries.c:225 mount/sundries.c:283 mount/sundries.c:298
-msgid "not enough memory"
-msgstr "記憶體不足"
+#: login-utils/lslogins.c:234
+#, fuzzy
+msgid "Last terminal"
+msgstr "嚴重：%s 並非終端機"
-#: mount/umount.c:42
-#, c-format
-msgid "umount: compiled without support for -f\n"
-msgstr "umount：編譯時未支援 -f\n"
+#: login-utils/lslogins.c:235
+msgid "hostname during the last session"
+msgstr ""
-#: mount/umount.c:138
-#, fuzzy, c-format
-msgid "umount: cannot set group id: %m"
-msgstr "umount：無法設定群組識別號：%s"
+#: login-utils/lslogins.c:235
+#, fuzzy
+msgid "Last hostname"
+msgstr "last：gethostname"
-#: mount/umount.c:141
-#, fuzzy, c-format
-msgid "umount: cannot set user id: %m"
-msgstr "umount：無法設定使用者識別號：%s"
+#: login-utils/lslogins.c:236
+#, fuzzy
+msgid "date of last failed login"
+msgstr "路徑 lstat 時失敗\n"
-#: mount/umount.c:170
-#, c-format
-msgid "umount: cannot fork: %s"
-msgstr "umount：無法衍生執行：%s"
+#: login-utils/lslogins.c:236
+msgid "Failed login"
+msgstr ""
-#: mount/umount.c:191
-#, c-format
-msgid "umount: %s: invalid block device"
-msgstr "umount：%s: 無效的區塊裝置"
+#: login-utils/lslogins.c:237
+#, fuzzy
+msgid "where did the login fail?"
+msgstr "寫入 lastlog 失敗"
-#: mount/umount.c:193
-#, c-format
-msgid "umount: %s: not mounted"
-msgstr "umount：%s: 未掛載"
+#: login-utils/lslogins.c:237
+#, fuzzy
+msgid "Failed login terminal"
+msgstr "設定控制終端機時失敗"
-#: mount/umount.c:195
-#, c-format
-msgid "umount: %s: can't write superblock"
-msgstr "umount：%s: 無法寫入超區塊"
+#: login-utils/lslogins.c:238
+msgid "user's hush settings"
+msgstr ""
-#: mount/umount.c:199
-#, c-format
-msgid ""
-"umount: %s: device is busy.\n"
-" (In some cases useful info about processes that use\n"
-" the device is found by lsof(8) or fuser(1))"
+#: login-utils/lslogins.c:238
+msgid "Hushed"
msgstr ""
-"umount：%s：裝置忙碌中。\n"
-" (在某些情況下關於使用該裝置之進程的\n"
-" 有用資訊，可以藉由 lsof(8) 或 fuser(1) 找到)"
-#: mount/umount.c:204
-#, c-format
-msgid "umount: %s: not found"
-msgstr "umount：%s: 找不到"
+#: login-utils/lslogins.c:239
+msgid "days user is warned of password expiration"
+msgstr ""
-#: mount/umount.c:206
-#, c-format
-msgid "umount: %s: must be superuser to umount"
-msgstr "umount：%s: 必須是系統管理者才能 umount"
+#: login-utils/lslogins.c:239
+msgid "Password expiration warn interval"
+msgstr ""
-#: mount/umount.c:208
-#, c-format
-msgid "umount: %s: block devices not permitted on fs"
-msgstr "umount：%s: 區塊裝置在檔案系統中不被允許"
+#: login-utils/lslogins.c:240
+msgid "password expiration date"
+msgstr ""
-#: mount/umount.c:210
-#, c-format
-msgid "umount: %s: %s"
-msgstr "umount：%s: %s"
+#: login-utils/lslogins.c:240
+#, fuzzy
+msgid "Password expiration"
+msgstr "密碼："
-#: mount/umount.c:238
-#, c-format
-msgid "umount: internal error: invalid abs path: %s"
+#: login-utils/lslogins.c:241
+msgid "date of last password change"
msgstr ""
-#: mount/umount.c:253
-#, fuzzy, c-format
-msgid "umount: failed to chdir to %s: %m"
-msgstr "mount：變更模式時發生錯誤 %s: %s"
+#: login-utils/lslogins.c:241
+#, fuzzy
+msgid "Password changed"
+msgstr "密碼："
-#: mount/umount.c:256
-#, fuzzy, c-format
-msgid "umount: failed to obtain current directory: %m"
-msgstr "mount：變更模式時發生錯誤 %s: %s"
+#: login-utils/lslogins.c:242
+msgid "number of days required between changes"
+msgstr ""
-#: mount/umount.c:259
-#, fuzzy, c-format
-msgid "umount: mountpoint moved (%s -> %s)"
-msgstr "mount：掛載點 %s 不存在"
+#: login-utils/lslogins.c:242
+#, fuzzy
+msgid "Minimum change time"
+msgstr "沒有變更所做"
-#: mount/umount.c:262
-#, c-format
-msgid "current directory moved to %s\n"
+#: login-utils/lslogins.c:243
+msgid "max number of days a password may remain unchanged"
msgstr ""
-#: mount/umount.c:334
-#, c-format
-msgid "no umount2, trying umount...\n"
-msgstr "沒有 umount2, 試試 umount...\n"
+#: login-utils/lslogins.c:243
+msgid "Maximum change time"
+msgstr ""
-#: mount/umount.c:354
-#, c-format
-msgid "umount: %s busy - remounted read-only\n"
-msgstr "umount：%s 忙碌中 - 已重新以唯讀掛載\n"
+#: login-utils/lslogins.c:244
+msgid "the user's security context"
+msgstr ""
-#: mount/umount.c:372
-#, c-format
-msgid "umount: could not remount %s read-only\n"
-msgstr "umount：無法以唯讀重新掛載 %s\n"
+#: login-utils/lslogins.c:244
+#, fuzzy
+msgid "Selinux context"
+msgstr "Linux 純文字"
-#: mount/umount.c:381
-#, c-format
-msgid "%s has been unmounted\n"
-msgstr "%s 已卸載\n"
+#: login-utils/lslogins.c:245
+#, fuzzy
+msgid "number of processes run by the user"
+msgstr "最大行程數量"
-#: mount/umount.c:487
-msgid "umount: cannot find list of filesystems to unmount"
-msgstr "umount：找不到可卸載檔案系統的列表"
+#: login-utils/lslogins.c:245
+#, fuzzy
+msgid "Running processes"
+msgstr "%s：找不到行程「%s」\n"
-#: mount/umount.c:519
+#: login-utils/lslogins.c:292 misc-utils/findmnt.c:136 misc-utils/lsblk.c:227
+#: sys-utils/lsipc.c:204 sys-utils/lsmem.c:145
#, c-format
-msgid ""
-"Usage: umount -h | -V\n"
-" umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
-" umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
+msgid "too many columns specified, the limit is %zu columns"
msgstr ""
-"用法：umount -h | -V\n"
-" umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
-" umount [-d] [-f] [-r] [-n] [-v] 特殊 | 節點…\n"
-
-#: mount/umount.c:563
-#, fuzzy, c-format
-msgid "failed to parse 'offset=%s' options\n"
-msgstr "剖析 %s %s 時失敗"
-#: mount/umount.c:571
-#, c-format
-msgid "device %s is associated with %s\n"
-msgstr "裝置 %s 與 %s 有所關聯\n"
+#: login-utils/lslogins.c:346 sys-utils/lsipc.c:467
+#, fuzzy
+msgid "unsupported time type"
+msgstr "不受支援的引數：%s"
-#: mount/umount.c:577
-#, c-format
-msgid "device %s is not associated with %s\n"
-msgstr "裝置 %s 未與 %s 有所關聯\n"
+#: login-utils/lslogins.c:350
+#, fuzzy
+msgid "failed to compose time string"
+msgstr "剖析大小時失敗"
-#: mount/umount.c:611
-msgid "Cannot unmount \"\"\n"
-msgstr "無法卸載「」\n"
+#: login-utils/lslogins.c:725
+#, fuzzy
+msgid "failed to get supplementary groups"
+msgstr "設定 umount 目標時失敗"
-#: mount/umount.c:619
-#, c-format
-msgid "Trying to unmount %s\n"
-msgstr "嘗試卸載 %s\n"
+#: login-utils/lslogins.c:992
+#, fuzzy, c-format
+msgid "cannot found '%s'"
+msgstr "無法開啟 %s"
-#: mount/umount.c:633
-msgid "umount: confused when analyzing mtab"
-msgstr "umount：分析 mtab 時感到困惑"
+#: login-utils/lslogins.c:1168
+#, fuzzy
+msgid "internal error: unknown column"
+msgstr "內部錯誤"
-#: mount/umount.c:639
-#, c-format
-msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
-msgstr "umount：無法卸載 %s -- %s 被掛載於相同點之上"
+#: login-utils/lslogins.c:1266
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Last logs:\n"
+msgstr "上次登入：%.*s "
-#: mount/umount.c:647
-#, c-format
-msgid "Could not find %s in mtab\n"
-msgstr "在 mtab 中找不到 %s\n"
+#: login-utils/lslogins.c:1329
+msgid "Display information about known users in the system.\n"
+msgstr ""
-#: mount/umount.c:657
-#, fuzzy, c-format
-msgid "%s is associated with %s\n"
-msgstr "裝置 %s 與 %s 有所關聯\n"
+#: login-utils/lslogins.c:1332
+msgid " -a, --acc-expiration display info about passwords expiration\n"
+msgstr ""
-#: mount/umount.c:663
-#, c-format
-msgid "umount: warning: %s is associated with more than one loop device\n"
+#: login-utils/lslogins.c:1333
+msgid " -c, --colon-separate display data in a format similar to /etc/passwd\n"
msgstr ""
-#: mount/umount.c:681
-#, c-format
-msgid "umount: %s is not mounted (according to mtab)"
-msgstr "umount：%s 未掛載 (根據 mtab)"
+#: login-utils/lslogins.c:1334 sys-utils/lsipc.c:310
+#, fuzzy
+msgid " -e, --export display in an export-able output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: mount/umount.c:695
-#, c-format
-msgid "umount: it seems %s is mounted multiple times"
-msgstr "umount：%s 似乎已被多次掛載"
+#: login-utils/lslogins.c:1335
+#, fuzzy
+msgid " -f, --failed display data about the users' last failed logins\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: mount/umount.c:709
-#, c-format
-msgid "umount: %s is not in the fstab (and you are not root)"
-msgstr "umount：%s 並不在 fstab 之中(而且您不是 root)"
+#: login-utils/lslogins.c:1336
+#, fuzzy
+msgid " -G, --supp-groups display information about groups\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: mount/umount.c:715
-#, c-format
-msgid "umount: %s mount disagrees with the fstab"
-msgstr "umount：%s 掛載與 fstab 不相符"
+#: login-utils/lslogins.c:1337
+msgid " -g, --groups=<groups> display users belonging to a group in <groups>\n"
+msgstr ""
-#: mount/umount.c:756
-#, c-format
-msgid "umount: only %s can unmount %s from %s"
-msgstr "umount：只有 %1$s 可以從 %3$s 卸載 %2$s"
+#: login-utils/lslogins.c:1338
+#, fuzzy
+msgid " -L, --last show info about the users' last login sessions\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: mount/umount.c:852
-msgid "umount: only root can do that"
-msgstr "umount：只有 root 可以那樣做"
+#: login-utils/lslogins.c:1339
+msgid " -l, --logins=<logins> display only users from <logins>\n"
+msgstr ""
-#: partx/partx.c:75
+#: login-utils/lslogins.c:1340 sys-utils/lsipc.c:312
#, fuzzy
-msgid "partition number"
-msgstr "分割區編號"
+msgid " -n, --newline display each piece of information on a new line\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: partx/partx.c:76
+#: login-utils/lslogins.c:1341 sys-utils/lsipc.c:305
#, fuzzy
-msgid "start of the partition in sectors"
-msgstr "只顯示此分割表"
+msgid " --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: partx/partx.c:77
+#: login-utils/lslogins.c:1342 sys-utils/lsipc.c:306
#, fuzzy
-msgid "end of the partition in sectors"
-msgstr "寫å\85¥å\88\86å\89²å\8d\80æ\96¼ %s æ\99\82失æ\95\97\n"
+msgid " --notruncate don't truncate output\n"
+msgstr " -f ä¸\8då\88\86å\89²é\95·å\88\97\n"
-#: partx/partx.c:78
+#: login-utils/lslogins.c:1343 sys-utils/lsipc.c:314
#, fuzzy
-msgid "number of sectors"
-msgstr "磁區數量"
+msgid " -o, --output[=<list>] define the columns to output\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: partx/partx.c:79
-msgid "human readable size"
-msgstr ""
+#: login-utils/lslogins.c:1344
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: partx/partx.c:80
+#: login-utils/lslogins.c:1345
#, fuzzy
-msgid "partition name"
-msgstr "分割區編號"
+msgid " -p, --pwd display information related to login by password.\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: partx/partx.c:81
+#: login-utils/lslogins.c:1346 sys-utils/lsipc.c:316
#, fuzzy
-msgid "partition UUID"
+msgid " -r, --raw display in raw mode\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: login-utils/lslogins.c:1347
+#, fuzzy
+msgid " -s, --system-accs display system accounts\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: login-utils/lslogins.c:1348 sys-utils/lsipc.c:307
+msgid " --time-format=<type> display dates in short, full or iso format\n"
msgstr ""
-"\n"
-"%d 分割區：\n"
-#: partx/partx.c:82
+#: login-utils/lslogins.c:1349
#, fuzzy
-msgid "partition table type (dos, gpt, ...)"
-msgstr "正寫入分割表到硬碟…"
+msgid " -u, --user-accs display user accounts\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: partx/partx.c:83
+#: login-utils/lslogins.c:1350
#, fuzzy
-msgid "partition flags"
-msgstr ""
-"\n"
-"%d 分割區：\n"
+msgid " -Z, --context display SELinux contexts\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-#: partx/partx.c:84
+#: login-utils/lslogins.c:1351
#, fuzzy
-msgid "partition type hex or uuid"
-msgstr "權限被拒用於識別號"
+msgid " -z, --print0 delimit user entries with a nul character\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: partx/partx.c:105
-#, fuzzy, c-format
-msgid "%s: failed to find unused loop device"
-msgstr "%s：找不到任何可用的環路裝置"
+#: login-utils/lslogins.c:1352
+msgid " --wtmp-file <path> set an alternate path for wtmp\n"
+msgstr ""
-#: partx/partx.c:109
-#, fuzzy, c-format
-msgid "Trying to use '%s' for the loop device\n"
-msgstr "mount：即將使用環路裝置 %s\n"
+#: login-utils/lslogins.c:1353
+msgid " --btmp-file <path> set an alternate path for btmp\n"
+msgstr ""
-#: partx/partx.c:113
-#, fuzzy, c-format
-msgid "%s: failed to set backing file"
-msgstr "%s：無法尋指到交換標籤 "
+#: login-utils/lslogins.c:1537
+#, fuzzy
+msgid "failed to request selinux state"
+msgstr "剖析開始時失敗"
-#: partx/partx.c:118
-#, fuzzy, c-format
-msgid "%s: failed to setup loop device"
-msgstr "%s：無法探查裝置"
+#: login-utils/lslogins.c:1551 login-utils/lslogins.c:1556
+msgid "Only one user may be specified. Use -l for multiple users."
+msgstr ""
-#: partx/partx.c:195
-#, fuzzy, c-format
-msgid "%s: failed to get partition number"
-msgstr "%s：無法寫入標籤"
+#: login-utils/newgrp.c:49 login-utils/newgrp.c:55
+#, fuzzy
+msgid "could not set terminal attributes"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: login-utils/newgrp.c:57
+#, fuzzy
+msgid "getline() failed"
+msgstr "setgid() 失敗"
+
+#: login-utils/newgrp.c:150
+msgid "Password: "
+msgstr "密碼："
+
+#: login-utils/newgrp.c:160 login-utils/sulogin.c:997
+#, fuzzy
+msgid "crypt failed"
+msgstr "寫入失敗"
-#: partx/partx.c:260
+#: login-utils/newgrp.c:173
#, fuzzy, c-format
-msgid "%s: error deleting partition %d"
-msgstr "已選分割區 %d\n"
+msgid " %s <group>\n"
+msgstr " %s <group>\n"
-#: partx/partx.c:262
-#, c-format
-msgid "%s: error deleting partitions %d-%d"
+#: login-utils/newgrp.c:176
+msgid "Log in to a new group.\n"
msgstr ""
-#: partx/partx.c:286 partx/partx.c:865
-#, c-format
-msgid "specified range <%d:%d> does not make sense"
-msgstr ""
+#: login-utils/newgrp.c:212
+#, fuzzy
+msgid "who are you?"
+msgstr "誰是您？"
-#: partx/partx.c:295
-#, fuzzy, c-format
-msgid "%s: partition #%d removed\n"
-msgstr "無已定義分割區\n"
+#: login-utils/newgrp.c:216 login-utils/newgrp.c:228 sys-utils/nsenter.c:473
+#: sys-utils/unshare.c:562
+#, fuzzy
+msgid "setgid failed"
+msgstr "setgid 失敗"
-#: partx/partx.c:299
-#, fuzzy, c-format
-msgid "%s: partition #%d already doesn't exist\n"
-msgstr "這個分割區已經存在。\n"
+#: login-utils/newgrp.c:221 login-utils/newgrp.c:223
+#, fuzzy
+msgid "no such group"
+msgstr "沒有此類群組"
-#: partx/partx.c:304
-#, fuzzy, c-format
-msgid "%s: deleting partition #%d failed"
-msgstr "已選分割區 %d\n"
+#: login-utils/newgrp.c:232 sys-utils/nsenter.c:475 sys-utils/unshare.c:565
+#, fuzzy
+msgid "setuid failed"
+msgstr "setuid 失敗"
-#: partx/partx.c:324
+#: login-utils/nologin.c:27 misc-utils/lslocks.c:528 misc-utils/mcookie.c:83
+#: misc-utils/uuidd.c:62 misc-utils/uuidgen.c:26 sys-utils/dmesg.c:267
+#: sys-utils/ipcmk.c:67 sys-utils/lscpu.c:2226 sys-utils/lsipc.c:291
+#: sys-utils/lsmem.c:494 sys-utils/readprofile.c:104 sys-utils/rtcwake.c:99
+#: term-utils/scriptlive.c:57 term-utils/scriptreplay.c:46
+#: term-utils/setterm.c:382 text-utils/line.c:31
#, fuzzy, c-format
-msgid "%s: error adding partition %d"
-msgstr "並未包含於分割區 %s 中\n"
+msgid " %s [options]\n"
+msgstr " %s [選項]\n"
-#: partx/partx.c:326
-#, fuzzy, c-format
-msgid "%s: error adding partitions %d-%d"
-msgstr "警告：分割區 %s "
+#: login-utils/nologin.c:30
+msgid "Politely refuse a login.\n"
+msgstr ""
-#: partx/partx.c:363
-#, fuzzy, c-format
-msgid "%s: partition #%d added\n"
-msgstr "無已定義分割區\n"
+#: login-utils/nologin.c:33
+#, fuzzy
+msgid " -c, --command <command> does nothing (for compatibility with su -c)\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
-#: partx/partx.c:368
+#: login-utils/nologin.c:113
#, fuzzy, c-format
-msgid "%s: adding partition #%d failed"
-msgstr "%s：swapon 失敗"
+msgid "This account is currently not available.\n"
+msgstr "這個磁碟為目前在使用中。\n"
-#: partx/partx.c:421
-#, c-format
-msgid "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
+#: login-utils/su-common.c:222
+msgid " (core dumped)"
msgstr ""
-#: partx/partx.c:572
-#, fuzzy, c-format
-msgid "failed to initialize blkid filter for '%s'"
-msgstr "初始化 libmount 迭代器時失敗"
+#: login-utils/su-common.c:344
+#, fuzzy
+msgid "failed to modify environment"
+msgstr "開啟目錄時失敗"
-#: partx/partx.c:580
-#, fuzzy, c-format
-msgid "%s: failed to read partition table"
-msgstr "重新讀取分割表"
+#: login-utils/su-common.c:380
+msgid "may not be used by non-root users"
+msgstr ""
-#: partx/partx.c:586
-#, fuzzy, c-format
-msgid "%s: partition table type '%s' detected\n"
-msgstr " (偵測到 %s 分割表)。"
+#: login-utils/su-common.c:404
+#, fuzzy
+msgid "authentication failed"
+msgstr "tcgetattr 失敗"
-#: partx/partx.c:590
+#: login-utils/su-common.c:417
#, fuzzy, c-format
-msgid "%s: partition table with no partitions"
-msgstr "ç£\81ç¢\9f %s ä¸\8då\8c\85å\90«æ\9c\89æ\95\88ç\9a\84å\88\86å\89²è¡¨\n"
+msgid "cannot open session: %s"
+msgstr "ç\84¡æ³\95ç\84¡æ³\95é\96\8bå\95\9fä½\9cæ¥é\9a\8e段ï¼\9a%s"
-#: partx/partx.c:602
-#, c-format
-msgid " %s [-a|-d|-s] [--nr <n:m> | <partition>] <disk>\n"
-msgstr ""
+#: login-utils/su-common.c:436
+#, fuzzy
+msgid "cannot block signals"
+msgstr "無法區塊信號"
-#: partx/partx.c:606
-msgid ""
-" -a, --add add specified partitions or all of them\n"
-" -d, --delete delete specified partitions or all of them\n"
-" -l, --list list partitions (DEPRECATED)\n"
-" -s, --show list partitions\n"
-"\n"
-" -b, --bytes print SIZE in bytes rather than in human readable "
-"format\n"
-" -g, --noheadings don't print headings for --show\n"
-" -n, --nr <n:m> specify the range of partitions (e.g. --nr 2:4)\n"
-" -o, --output <type> define which output columns to use\n"
-" -P, --pairs use key=\"value\" output format\n"
-" -r, --raw use raw output format\n"
-" -t, --type <type> specify the partition type (dos, bsd, solaris, etc.)\n"
-" -v, --verbose verbose mode\n"
+#: login-utils/su-common.c:453
+msgid "cannot initialize signal mask for session"
msgstr ""
-#: partx/partx.c:624
+#: login-utils/su-common.c:461
#, fuzzy
-msgid ""
-"\n"
-"Available columns (for --show, --raw or --pairs):\n"
-msgstr "可用命令：\n"
+msgid "cannot initialize signal mask"
+msgstr "無法區塊信號"
-#: partx/partx.c:637 sys-utils/losetup.c:229
-#, fuzzy, c-format
-msgid "the options %s are mutually exclusive"
-msgstr "選項彼此互斥"
+#: login-utils/su-common.c:471
+#, fuzzy
+msgid "cannot set signal handler for session"
+msgstr "無法設定信號處理程式"
-#: partx/partx.c:703
+#: login-utils/su-common.c:479 misc-utils/uuidd.c:401 sys-utils/lscpu.c:878
#, fuzzy
-msgid "failed to parse --nr <M-N> range"
-msgstr "剖析優先權時失敗"
+msgid "cannot set signal handler"
+msgstr "無法設定信號處理程式"
-#: partx/partx.c:801
+#: login-utils/su-common.c:487
#, fuzzy
-msgid "--nr and <partition> are mutually exclusive"
-msgstr "選項彼此互斥"
+msgid "cannot set signal mask"
+msgstr "無法設定信號處理程式"
-#: partx/partx.c:820
-#, c-format
-msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
-msgstr ""
+#: login-utils/su-common.c:512 term-utils/script.c:953
+#: term-utils/scriptlive.c:296
+#, fuzzy
+msgid "failed to create pseudo-terminal"
+msgstr "初始化輸出表格時失敗"
-#: partx/partx.c:832
-#, fuzzy, c-format
-msgid "%s: cannot delete partitions"
-msgstr "無法刪除一個空的分割區"
+#: login-utils/su-common.c:524 term-utils/script.c:963
+#: term-utils/scriptlive.c:303
+#, fuzzy
+msgid "cannot create child process"
+msgstr "無法建立子行程"
-#: partx/partx.c:835
+#: login-utils/su-common.c:543
#, fuzzy, c-format
-msgid "%s: partitioned loop devices unsupported"
-msgstr "速度 %d 不受支援"
+msgid "cannot change directory to %s"
+msgstr "無法變更目錄到 %s"
-#: partx/partx.c:852
+#: login-utils/su-common.c:570 term-utils/scriptlive.c:352
#, fuzzy, c-format
-msgid "%s: failed to initialize blkid prober"
-msgstr "初始化列緩衝區時失敗\n"
-
-#: schedutils/chrt.c:63
-#, c-format
msgid ""
"\n"
-"chrt - manipulate real-time attributes of a process\n"
-"\n"
-"Set policy:\n"
-" chrt [options] <policy> <priority> {<pid> | <command> [<arg> ...]}\n"
-"\n"
-"Get policy:\n"
-" chrt [options] {<pid> | <command> [<arg> ...]}\n"
+"Session terminated, killing shell..."
msgstr ""
"\n"
-" chrt - 操控進程的即時屬性\n"
-"\n"
-"設定策略：\n"
-" chrt [選項] <policy> <priority> {<pid> |<command> [<arg>...]}\n"
-"\n"
-"取得策略：\n"
-" chrt [選項] {<pid> | <command> [<arg>...]}\n"
+"作業階段終止，killing 命令殼…"
-#: schedutils/chrt.c:70
-#, c-format
+#: login-utils/su-common.c:581
+#, fuzzy, c-format
+msgid " ...killed.\n"
+msgstr "...killed。\n"
+
+#: login-utils/su-common.c:678
+#, fuzzy
+msgid "failed to set the PATH environment variable"
+msgstr "設定 %s 資源限制時失敗"
+
+#: login-utils/su-common.c:755
+#, fuzzy
+msgid "cannot set groups"
+msgstr "無法設定群組"
+
+#: login-utils/su-common.c:761
+#, fuzzy, c-format
+msgid "failed to establish user credentials: %s"
+msgstr "剖析等級『%s 時失敗』"
+
+#: login-utils/su-common.c:771 sys-utils/eject.c:661
+msgid "cannot set group id"
+msgstr "無法設定群組識別號"
+
+#: login-utils/su-common.c:773 sys-utils/eject.c:664
+msgid "cannot set user id"
+msgstr "無法設定使用者識別號"
+
+#: login-utils/su-common.c:841
+msgid " -m, -p, --preserve-environment do not reset environment variables\n"
+msgstr ""
+
+#: login-utils/su-common.c:842
+msgid " -w, --whitelist-environment <list> don't reset specified variables\n"
+msgstr ""
+
+#: login-utils/su-common.c:845
+#, fuzzy
+msgid " -g, --group <group> specify the primary group\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: login-utils/su-common.c:846
+#, fuzzy
+msgid " -G, --supp-group <group> specify a supplemental group\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: login-utils/su-common.c:849
+#, fuzzy
+msgid " -, -l, --login make the shell a login shell\n"
+msgstr " -h, --help 這個小用法指導\n"
+
+#: login-utils/su-common.c:850
+#, fuzzy
+msgid " -c, --command <command> pass a single command to the shell with -c\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: login-utils/su-common.c:851
+#, fuzzy
msgid ""
-"\n"
-"Scheduling policies:\n"
-" -b | --batch set policy to SCHED_BATCH\n"
-" -f | --fifo set policy to SCHED_FIFO\n"
-" -i | --idle set policy to SCHED_IDLE\n"
-" -o | --other set policy to SCHED_OTHER\n"
-" -r | --rr set policy to SCHED_RR (default)\n"
+" --session-command <command> pass a single command to the shell with -c\n"
+" and do not create a new session\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: login-utils/su-common.c:853
+#, fuzzy
+msgid " -f, --fast pass -f to the shell (for csh or tcsh)\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: login-utils/su-common.c:854
+#, fuzzy
+msgid " -s, --shell <shell> run <shell> if /etc/shells allows it\n"
+msgstr " -s, --shell <shell> 設定命令殼引言慣例\n"
+
+#: login-utils/su-common.c:855
+#, fuzzy
+msgid " -P, --pty create a new pseudo-terminal\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: login-utils/su-common.c:865
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] -u <user> [[--] <command>]\n"
+" %1$s [options] [-] [<user> [<argument>...]]\n"
msgstr ""
-"\n"
-"排程策略：\n"
-" -b | --batch 設定策略為 SCHED_BATCH\n"
-" -f | --fifo 設定策略為 SCHED_FIFO\n"
-" -i | --idle 設定策略為 SCHED_IDLE\n"
-" -o | --other 設定策略為 SCHED_OTHER\n"
-" -r | --rr 設定策略為 SCHED_RR (預設)\n"
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
-#: schedutils/chrt.c:79
-#, c-format
+#: login-utils/su-common.c:870
msgid ""
-"\n"
-"Scheduling flags:\n"
-" -R | --reset-on-fork set SCHED_RESET_ON_FORK for FIFO or RR\n"
+"Run <command> with the effective user ID and group ID of <user>. If -u is\n"
+"not given, fall back to su(1)-compatible semantics and execute standard shell.\n"
+"The options -c, -f, -l, and -s are mutually exclusive with -u.\n"
msgstr ""
-"\n"
-"排程旗標：\n"
-" -R | --reset-on-fork 設定 SCHED_RESET_ON_FORK 用於 FIFO 或 RR\n"
-#: schedutils/chrt.c:83
+#: login-utils/su-common.c:875
+#, fuzzy
+msgid " -u, --user <user> username\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: login-utils/su-common.c:886
#, fuzzy, c-format
+msgid " %s [options] [-] [<user> [<argument>...]]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: login-utils/su-common.c:890
+#, fuzzy
msgid ""
-"\n"
-"Options:\n"
-" -a | --all-tasks operate on all the tasks (threads) for a given pid\n"
-" -h | --help display this help\n"
-" -m | --max show min and max valid priorities\n"
-" -p | --pid operate on existing given pid\n"
-" -v | --verbose display status information\n"
-" -V | --version output version information\n"
-"\n"
+"Change the effective user ID and group ID to that of <user>.\n"
+"A mere - implies -l. If <user> is not given, root is assumed.\n"
msgstr ""
"\n"
-"選項：\n"
-" -h | --help 顯示這個說明\n"
-" -m | --max 顯示最小和最大的有效優先等級\n"
-" -p | --pid 作用於現有給定的 pid\n"
-" -v | --verbose 顯示狀態資訊\n"
-" -V | --version 輸出版本資訊\n"
-"\n"
-
-#: schedutils/chrt.c:105
-#, c-format
-msgid "failed to get pid %d's policy"
-msgstr "取得 pid %d 的策略時失敗"
+" 變更有效使用者識別號和群組識別號到該的使用者。\n"
+" mere - 意味著 -l. 如果使用者無法給定的，假設根。\n"
-#: schedutils/chrt.c:108
+#: login-utils/su-common.c:936
#, c-format
-msgid "pid %d's new scheduling policy: "
-msgstr "pid %d 新的排程策略："
+msgid "specifying more than %d supplemental group is not possible"
+msgid_plural "specifying more than %d supplemental groups is not possible"
+msgstr[0] ""
-#: schedutils/chrt.c:110
-#, c-format
-msgid "pid %d's current scheduling policy: "
-msgstr "pid %d 目前的排程策略："
+#: login-utils/su-common.c:942
+#, fuzzy, c-format
+msgid "group %s does not exist"
+msgstr "使用者 %s 不存在"
-#: schedutils/chrt.c:143
-#, fuzzy
-msgid "unknown scheduling policy"
-msgstr "pid %d 新的排程策略："
+#: login-utils/su-common.c:1051
+msgid "--pty is not supported for your system"
+msgstr ""
-#: schedutils/chrt.c:147
-#, c-format
-msgid "failed to get pid %d's attributes"
-msgstr "取得 pid %d 的屬性時失敗"
+#: login-utils/su-common.c:1085
+msgid "ignoring --preserve-environment, it's mutually exclusive with --login"
+msgstr ""
-#: schedutils/chrt.c:150
-#, c-format
-msgid "pid %d's new scheduling priority: %d\n"
-msgstr "pid %d 新的排程優先權：%d\n"
+#: login-utils/su-common.c:1099
+msgid "options --{shell,fast,command,session-command,login} and --user are mutually exclusive"
+msgstr ""
-#: schedutils/chrt.c:153
-#, c-format
-msgid "pid %d's current scheduling priority: %d\n"
-msgstr "pid %d 目前的排程優先權：%d\n"
+#: login-utils/su-common.c:1102
+#, fuzzy
+msgid "no command was specified"
+msgstr "未指定任何動作"
-#: schedutils/chrt.c:188
-#, c-format
-msgid "SCHED_%s min/max priority\t: %d/%d\n"
-msgstr "SCHED_%s 最小/最大優先權\t：%d/%d\n"
+#: login-utils/su-common.c:1114
+msgid "only root can specify alternative groups"
+msgstr ""
-#: schedutils/chrt.c:191
+#: login-utils/su-common.c:1125
#, c-format
-msgid "SCHED_%s not supported?\n"
-msgstr "SCHED_%s 不被支援？\n"
+msgid "user %s does not exist or the user entry does not contain all the required fields"
+msgstr ""
-#: schedutils/chrt.c:256 schedutils/ionice.c:163 schedutils/ionice.c:211
-#: schedutils/ionice.c:221 schedutils/taskset.c:159
-msgid "failed to parse pid"
-msgstr "剖析 pid 時失敗"
+#: login-utils/su-common.c:1160
+#, fuzzy, c-format
+msgid "using restricted shell %s"
+msgstr "使用限制的命令殼 %s"
-#: schedutils/chrt.c:286 schedutils/chrt.c:319
+#: login-utils/su-common.c:1179
#, fuzzy
-msgid "cannot obtain the list of tasks"
-msgstr "找不到做為 %s 的裝置"
+msgid "failed to allocate pty handler"
+msgstr "配置迭代器時失敗"
-#: schedutils/chrt.c:298
-msgid "failed to parse priority"
-msgstr "剖析優先權時失敗"
-
-#: schedutils/chrt.c:304
-msgid ""
-"SCHED_RESET_ON_FORK flag is suppoted for SCHED_FIFO and SCHED_RR policies "
-"only"
-msgstr "SCHED_RESET_ON_FORK 旗標只被支援用於 SCHED_FIFO 和 SCHED_RR 策略"
-
-#: schedutils/chrt.c:322
+#: login-utils/su-common.c:1201
#, fuzzy, c-format
-msgid "failed to set tid %d's policy"
-msgstr "è¨å®\9a pid %d ç\9a\84ç\96ç\95¥æ\99\82失æ\95\97"
+msgid "warning: cannot change directory to %s"
+msgstr "è¦å\91\8aï¼\9aç\84¡æ³\95è®\8aæ\9b´ç\9b®é\8c\84å\88° %s"
-#: schedutils/chrt.c:325
-#, c-format
-msgid "failed to set pid %d's policy"
-msgstr "設定 pid %d 的策略時失敗"
+#: login-utils/sulogin.c:130
+#, fuzzy
+msgid "tcgetattr failed"
+msgstr "tcgetattr 失敗"
-#: schedutils/chrt.c:334 sys-utils/switch_root.c:221 term-utils/script.c:445
-#, c-format
-msgid "failed to execute %s"
-msgstr "執行 %s 時失敗"
+#: login-utils/sulogin.c:208
+#, fuzzy
+msgid "tcsetattr failed"
+msgstr "tcsetattr 失敗"
-#: schedutils/ionice.c:75
-msgid "ioprio_get failed"
-msgstr "ioprio_get 失敗"
+#: login-utils/sulogin.c:470
+#, fuzzy, c-format
+msgid "%s: no entry for root\n"
+msgstr "%s：沒有條目用於根\n"
-#: schedutils/ionice.c:97
-msgid "ioprio_set failed"
-msgstr "ioprio_set 失敗"
+#: login-utils/sulogin.c:497
+#, fuzzy, c-format
+msgid "%s: no entry for root"
+msgstr "%s：沒有條目用於根"
+
+#: login-utils/sulogin.c:502
+#, fuzzy, c-format
+msgid "%s: root password garbled"
+msgstr "%s：Root 密碼錯亂"
-#: schedutils/ionice.c:103
+#: login-utils/sulogin.c:531
#, c-format
msgid ""
"\n"
-"%1$s - sets or gets process io scheduling class and priority.\n"
-"\n"
-"Usage:\n"
-" %1$s [OPTION] -p PID [PID...]\n"
-" %1$s [OPTION] COMMAND\n"
-"\n"
-"Options:\n"
-" -c, --class <class> scheduling class name or number\n"
-" 0: none, 1: realtime, 2: best-effort, 3: idle\n"
-" -n, --classdata <num> scheduling class data\n"
-" 0-7 for realtime and best-effort classes\n"
-" -p, --pid=PID view or modify already running process\n"
-" -t, --ignore ignore failures\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
+"Cannot open access to console, the root account is locked.\n"
+"See sulogin(8) man page for more details.\n"
"\n"
+"Press Enter to continue.\n"
msgstr ""
-#: schedutils/ionice.c:146
-#, fuzzy
-msgid "failed to parse class data"
-msgstr "剖析 %s %s 時失敗"
+#: login-utils/sulogin.c:537
+#, fuzzy, c-format
+msgid "Give root password for login: "
+msgstr "給出 Root 密碼用於維護\n"
-#: schedutils/ionice.c:152
-#, fuzzy
-msgid "failed to parse class"
-msgstr "剖析 %s %s 時失敗"
+#: login-utils/sulogin.c:539
+#, fuzzy, c-format
+msgid "Press Enter for login: "
+msgstr "按下輸入用於維護"
-#: schedutils/ionice.c:157
+#: login-utils/sulogin.c:542
#, fuzzy, c-format
-msgid "unknown scheduling class: '%s'"
-msgstr "不明直欄：%s"
+msgid "Give root password for maintenance\n"
+msgstr "給出 Root 密碼用於維護\n"
-#: schedutils/ionice.c:181
-msgid "ignoring given class data for none class"
-msgstr "忽略給定的無類別資料"
+#: login-utils/sulogin.c:544
+#, fuzzy, c-format
+msgid "Press Enter for maintenance\n"
+msgstr "按下輸入用於維護"
-#: schedutils/ionice.c:189
-msgid "ignoring given class data for idle class"
-msgstr "忽略給定的閒置類別資料"
+#: login-utils/sulogin.c:545
+#, fuzzy, c-format
+msgid "(or press Control-D to continue): "
+msgstr "(或型態 Control-D 到繼續)："
-#: schedutils/ionice.c:194
+#: login-utils/sulogin.c:735
+#, fuzzy
+msgid "change directory to system root failed"
+msgstr "變更目錄到系統根失敗"
+
+#: login-utils/sulogin.c:784
+#, fuzzy
+msgid "setexeccon failed"
+msgstr "setexeccon 失敗"
+
+#: login-utils/sulogin.c:805
#, fuzzy, c-format
-msgid "unknown prio class %d"
-msgstr "不當的優先權類別 %d"
+msgid " %s [options] [tty device]\n"
+msgstr " %s [選項] [tty 裝置]\n"
-#: schedutils/ionice.c:230 schedutils/taskset.c:236 sys-utils/prlimit.c:642
-#, c-format
-msgid "executing %s failed"
-msgstr "執行 %s 時失敗"
+#: login-utils/sulogin.c:808
+msgid "Single-user login.\n"
+msgstr ""
-#: schedutils/taskset.c:51
-#, c-format
+#: login-utils/sulogin.c:811
+#, fuzzy
msgid ""
-"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
-"\n"
+" -p, --login-shell start a login shell\n"
+" -t, --timeout <seconds> max time to wait for a password (default: no limit)\n"
+" -e, --force examine password files directly if getpwnam(3) fails\n"
msgstr ""
-"用法：%s [選項] [遮罩| cpu-list] [pid|cmd [引數...]]\n"
-"\n"
+" -p, --login-shell 開始登入命令殼\n"
+" -t, --timeout <seconds> 最大時間到等待密碼 (預設：沒有限制)\n"
+" -e, --force 檢查密碼檔案直接如果 getpwnam (3) 失敗\n"
-#: schedutils/taskset.c:55
-#, fuzzy, c-format
-msgid ""
-"Options:\n"
-" -a, --all-tasks operate on all the tasks (threads) for a given pid\n"
-" -p, --pid operate on existing given pid\n"
-" -c, --cpu-list display and specify cpus in list format\n"
-" -h, --help display this help\n"
-" -V, --version output version information\n"
-"\n"
-msgstr ""
-"選項：\n"
-" -p, --pid 作用於現有給定的 pid\n"
-" -c, --cpu-list 以清單格式顯示和指定中央處理器\n"
-" -h, --help 顯示這個說明\n"
-" -V, --version 輸出版本資訊\n"
-"\n"
+#: login-utils/sulogin.c:867 misc-utils/findmnt.c:1489 sys-utils/wdctl.c:640
+#: term-utils/agetty.c:842 term-utils/wall.c:217
+#, fuzzy
+msgid "invalid timeout argument"
+msgstr "無效的逾時引數"
-#: schedutils/taskset.c:63
-#, c-format
-msgid ""
-"The default behavior is to run a new command:\n"
-" %1$s 03 sshd -b 1024\n"
-"You can retrieve the mask of an existing task:\n"
-" %1$s -p 700\n"
-"Or set it:\n"
-" %1$s -p 03 700\n"
-"List format uses a comma-separated list instead of a mask:\n"
-" %1$s -pc 0,3,7-11 700\n"
-"Ranges in list format can take a stride argument:\n"
-" e.g. 0-31:2 is equivalent to mask 0x55555555\n"
-msgstr ""
-"預設行為是執行新的命令：\n"
-" %1$s 03 sshd -b 1024\n"
-"您可以取回現有任務的遮罩：\n"
-" %1$s -p 700\n"
-"或設定它：\n"
-" %1$s -p 03 700\n"
-"清單格式使用以逗號分隔的清單以代替遮罩：\n"
-" %1$s -pc 0,3,7-11 700\n"
-"清單格式中的範圍可以加上一個跨越引數：\n"
-" 例如：0-31:2 相當於遮罩 0x55555555\n"
+#: login-utils/sulogin.c:886
+#, fuzzy
+msgid "only superuser can run this program"
+msgstr "只有根可以運行這個程式。"
-#: schedutils/taskset.c:75
-#, c-format
+#: login-utils/sulogin.c:929
+#, fuzzy
+msgid "cannot open console"
+msgstr "無法開啟 %s"
+
+#: login-utils/sulogin.c:936
+#, fuzzy
+msgid "cannot open password database"
+msgstr "無法開啟密碼資料庫。"
+
+#: login-utils/sulogin.c:1010
+#, fuzzy, c-format
msgid ""
+"cannot execute su shell\n"
"\n"
-"For more information see taskset(1).\n"
-msgstr ""
+msgstr "無法取得磁碟大小"
+
+#: login-utils/sulogin.c:1017
+#, fuzzy
+msgid ""
+"Timed out\n"
"\n"
-"要獲得更多資訊請參看 taskset(1)。\n"
+msgstr "已逾時"
-#: schedutils/taskset.c:86
-#, c-format
-msgid "pid %d's new affinity list: %s\n"
-msgstr "pid %d 新的近似者清單：%s\n"
+#: login-utils/sulogin.c:1049
+#, fuzzy
+msgid ""
+"cannot wait on su shell\n"
+"\n"
+msgstr "無法取得磁碟大小"
-#: schedutils/taskset.c:87
-#, c-format
-msgid "pid %d's current affinity list: %s\n"
-msgstr "pid %d 目前的近似者清單：%s\n"
+#: login-utils/utmpdump.c:173
+#, fuzzy, c-format
+msgid "%s: cannot get file position"
+msgstr "%s：無法刪除分割區"
-#: schedutils/taskset.c:90
+#: login-utils/utmpdump.c:177
#, c-format
-msgid "pid %d's new affinity mask: %s\n"
-msgstr "pid %d 新的近似者遮罩：%s\n"
+msgid "%s: cannot add inotify watch."
+msgstr "%s：無法加入 inotify 監看。"
-#: schedutils/taskset.c:91
+#: login-utils/utmpdump.c:186
#, c-format
-msgid "pid %d's current affinity mask: %s\n"
-msgstr "pid %d 目前的近似者遮罩：%s\n"
+msgid "%s: cannot read inotify events"
+msgstr "%s：無法讀取 inotify 事件"
-#: schedutils/taskset.c:96
+#: login-utils/utmpdump.c:247 login-utils/utmpdump.c:252
#, fuzzy
-msgid "conversion from cpuset to string failed"
-msgstr "轉換 rtc 時間"
+msgid "Extraneous newline in file. Exiting."
+msgstr "外來新列字元在中檔案。離開。"
-#: schedutils/taskset.c:106 schedutils/taskset.c:122
-#, c-format
-msgid "failed to get pid %d's affinity"
-msgstr "取得 pid %d 的近似者時失敗"
+#: login-utils/utmpdump.c:306
+#, fuzzy, c-format
+msgid " %s [options] [filename]\n"
+msgstr " %s [選項] [檔名]\n"
-#: schedutils/taskset.c:116
-#, c-format
-msgid "failed to set pid %d's affinity"
-msgstr "設定 pid %d 的近似者時失敗"
+#: login-utils/utmpdump.c:309
+msgid "Dump UTMP and WTMP files in raw format.\n"
+msgstr ""
-#: schedutils/taskset.c:183 sys-utils/chcpu.c:252
-msgid "cannot determine NR_CPUS; aborting"
-msgstr "無法決定 NR_CPUS；放棄"
+#: login-utils/utmpdump.c:312
+#, fuzzy
+msgid " -f, --follow output appended data as the file grows\n"
+msgstr ""
+" -f, --follow 輸出附加的資料做為檔案 grows\n"
+" -r, --reverse 寫入上一步傾印的資料進入 utmp 檔案\n"
-#: schedutils/taskset.c:192 schedutils/taskset.c:205 sys-utils/chcpu.c:258
-msgid "cpuset_alloc failed"
-msgstr "cpuset_alloc 失敗"
+#: login-utils/utmpdump.c:313
+#, fuzzy
+msgid " -r, --reverse write back dumped data into utmp file\n"
+msgstr ""
+" -f, --follow 輸出附加的資料做為檔案 grows\n"
+" -r, --reverse 寫入上一步傾印的資料進入 utmp 檔案\n"
+
+#: login-utils/utmpdump.c:314
+#, fuzzy
+msgid " -o, --output <file> write to file instead of standard output\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
-#: schedutils/taskset.c:212 sys-utils/chcpu.c:205
+#: login-utils/utmpdump.c:378
+#, fuzzy
+msgid "following standard input is unsupported"
+msgstr "下列標準輸入被不受支援的"
+
+#: login-utils/utmpdump.c:384
#, fuzzy, c-format
-msgid "failed to parse CPU list: %s"
-msgstr "剖析 CPU 遮罩 %s 時失敗"
+msgid "Utmp undump of %s\n"
+msgstr "Utmp undump 的 %s\n"
-#: schedutils/taskset.c:215
+#: login-utils/utmpdump.c:387
#, fuzzy, c-format
-msgid "failed to parse CPU mask: %s"
-msgstr "剖析 CPU 遮罩 %s 時失敗"
+msgid "Utmp dump of %s\n"
+msgstr "Utmp 傾印的 %s\n"
-#: sys-utils/arch.c:67
+#: login-utils/vipw.c:145
#, fuzzy
-msgid "uname failed"
-msgstr "unshare 失敗"
+msgid "can't open temporary file"
+msgstr "無法開啟暫存檔"
-#: sys-utils/chcpu.c:75 sys-utils/chcpu.c:157
+#: login-utils/vipw.c:161
#, fuzzy, c-format
-msgid "CPU %d does not exist\n"
-msgstr "%s：「%s」不存在。\n"
+msgid "%s: create a link to %s failed"
+msgstr "%s：建立連結到 %s 失敗"
-#: sys-utils/chcpu.c:79
-#, c-format
-msgid "CPU %d is not hot pluggable\n"
-msgstr ""
+#: login-utils/vipw.c:168
+#, fuzzy, c-format
+msgid "Can't get context for %s"
+msgstr "無法提取語境用於 %s"
-#: sys-utils/chcpu.c:84
+#: login-utils/vipw.c:174
#, fuzzy, c-format
-msgid "CPU %d is already enabled\n"
-msgstr "ç£\81å\8d\80 %d å·²ç¶\93被é\85\8dç½®\n"
+msgid "Can't set context for %s"
+msgstr "ç\84¡æ³\95è¨å®\9aèª\9eå¢\83ç\94¨æ\96¼ %s"
-#: sys-utils/chcpu.c:88
+#: login-utils/vipw.c:239
#, fuzzy, c-format
-msgid "CPU %d is already disabled\n"
-msgstr "磁區 %d 已經被配置\n"
+msgid "%s unchanged"
+msgstr "%s 未變更"
-#: sys-utils/chcpu.c:96
-#, c-format
-msgid "CPU %d enable failed (CPU is deconfigured)\n"
+#: login-utils/vipw.c:257
+#, fuzzy
+msgid "cannot get lock"
+msgstr "無法提取鎖定"
+
+#: login-utils/vipw.c:284
+#, fuzzy
+msgid "no changes made"
+msgstr "沒有變更所做"
+
+#: login-utils/vipw.c:293
+#, fuzzy
+msgid "cannot chmod file"
+msgstr "無法 chmod 檔案"
+
+#: login-utils/vipw.c:308
+msgid "Edit the password or group file.\n"
msgstr ""
-#: sys-utils/chcpu.c:99
+#: login-utils/vipw.c:360
+msgid "You are using shadow groups on this system.\n"
+msgstr "您正在這個系統中使用陰影群組。\n"
+
+#: login-utils/vipw.c:361
+msgid "You are using shadow passwords on this system.\n"
+msgstr "您正在這個系統中使用陰影密碼。\n"
+
+#. TRANSLATORS: this program uses for y and n rpmatch(3),
+#. * which means they can be translated.
+#: login-utils/vipw.c:365
#, c-format
-msgid "CPU %d enable failed (%m)\n"
-msgstr ""
+msgid "Would you like to edit %s now [y/n]? "
+msgstr "您現在想要編輯 %s 嗎[y/n]？"
-#: sys-utils/chcpu.c:101
+#: misc-utils/blkid.c:70
#, c-format
-msgid "CPU %d enabled\n"
+msgid ""
+" %s --label <label> | --uuid <uuid>\n"
+"\n"
msgstr ""
-#: sys-utils/chcpu.c:104
+#: misc-utils/blkid.c:71
#, c-format
-msgid "CPU %d disable failed (last enabled CPU)\n"
+msgid ""
+" %s [--cache-file <file>] [-ghlLv] [--output <format>] [--match-tag <tag>] \n"
+" [--match-token <token>] [<dev> ...]\n"
+"\n"
msgstr ""
-#: sys-utils/chcpu.c:110
+#: misc-utils/blkid.c:73
#, c-format
-msgid "CPU %d disable failed (%m)\n"
+msgid ""
+" %s -p [--match-tag <tag>] [--offset <offset>] [--size <size>] \n"
+" [--output <format>] <dev> ...\n"
+"\n"
msgstr ""
-#: sys-utils/chcpu.c:112
+#: misc-utils/blkid.c:75
#, c-format
-msgid "CPU %d disabled\n"
+msgid " %s -i [--match-tag <tag>] [--output <format>] <dev> ...\n"
msgstr ""
-#: sys-utils/chcpu.c:124
-msgid "This system does not support rescanning of CPUs"
+#: misc-utils/blkid.c:77
+#, fuzzy
+msgid ""
+" -c, --cache-file <file> read from <file> instead of reading from the default\n"
+" cache file (-c /dev/null means no cache)\n"
msgstr ""
+" --noadjfile 不存取 %s；這個需求使用的\n"
+" 還是 --utc 或 --localtime\n"
+" --adjfile <file> 指定路徑到調整檔案；\n"
+" 預設是 %s\n"
-#: sys-utils/chcpu.c:126
+#: misc-utils/blkid.c:79
#, fuzzy
-msgid "Failed to trigger rescan of CPUs"
-msgstr "設定身分為 %s 時失敗"
+msgid " -d, --no-encoding don't encode non-printing characters\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/chcpu.c:127
-#, c-format
-msgid "Triggered rescan of CPUs\n"
+#: misc-utils/blkid.c:80
+msgid " -g, --garbage-collect garbage collect the blkid cache\n"
msgstr ""
-#: sys-utils/chcpu.c:134
-msgid "This system does not support setting the dispatching mode of CPUs"
+#: misc-utils/blkid.c:81
+msgid ""
+" -o, --output <format> output format; can be one of:\n"
+" value, device, export or full; (default: full)\n"
msgstr ""
-#: sys-utils/chcpu.c:138
+#: misc-utils/blkid.c:83
#, fuzzy
-msgid "Failed to set horizontal dispatch mode"
-msgstr "設定身分為 %s 時失敗"
+msgid " -k, --list-filesystems list all known filesystems/RAIDs and exit\n"
+msgstr " -l, --list-shells 列印命令殼清單的然後離開\n"
-#: sys-utils/chcpu.c:139
-#, c-format
-msgid "Succesfully set horizontal dispatching mode\n"
+#: misc-utils/blkid.c:84
+msgid " -s, --match-tag <tag> show specified tag(s) (default show all tags)\n"
msgstr ""
-#: sys-utils/chcpu.c:142
+#: misc-utils/blkid.c:85
+msgid " -t, --match-token <token> find device with a specific token (NAME=value pair)\n"
+msgstr ""
+
+#: misc-utils/blkid.c:86
#, fuzzy
-msgid "Failed to set vertical dispatch mode"
-msgstr "設定身分為 %s 時失敗"
+msgid " -l, --list-one look up only first device with token specified by -t\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: sys-utils/chcpu.c:143
-#, c-format
-msgid "Succesfully set vertical dispatching mode\n"
-msgstr ""
+#: misc-utils/blkid.c:87
+#, fuzzy
+msgid " -L, --label <label> convert LABEL to device name\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/chcpu.c:161
-#, fuzzy, c-format
-msgid "CPU %d is not configurable\n"
-msgstr "%s：「%s」並非可執行。\n"
+#: misc-utils/blkid.c:88
+#, fuzzy
+msgid " -U, --uuid <uuid> convert UUID to device name\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: sys-utils/chcpu.c:166
-#, fuzzy, c-format
-msgid "CPU %d is already configured\n"
-msgstr "磁區 %d 已經被配置\n"
+#: misc-utils/blkid.c:89
+#, fuzzy
+msgid " <dev> specify device(s) to probe (default: all devices)\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: sys-utils/chcpu.c:170
-#, fuzzy, c-format
-msgid "CPU %d is already deconfigured\n"
-msgstr "磁區 %d 已經被配置\n"
+#: misc-utils/blkid.c:91
+#, fuzzy
+msgid "Low-level probing options:\n"
+msgstr "輸出格式：\n"
-#: sys-utils/chcpu.c:175
-#, c-format
-msgid "CPU %d deconfigure failed (CPU is enabled)\n"
-msgstr ""
+#: misc-utils/blkid.c:92
+#, fuzzy
+msgid " -p, --probe low-level superblocks probing (bypass cache)\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
-#: sys-utils/chcpu.c:182
-#, c-format
-msgid "CPU %d configure failed (%m)\n"
-msgstr ""
+#: misc-utils/blkid.c:93
+#, fuzzy
+msgid " -i, --info gather information about I/O limits\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/chcpu.c:184
-#, c-format
-msgid "CPU %d configured\n"
-msgstr ""
+#: misc-utils/blkid.c:94
+#, fuzzy
+msgid " -S, --size <size> overwrite device size\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/chcpu.c:188
-#, c-format
-msgid "CPU %d deconfigure failed (%m)\n"
-msgstr ""
+#: misc-utils/blkid.c:95
+#, fuzzy
+msgid " -O, --offset <offset> probe at the given offset\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: sys-utils/chcpu.c:190
-#, c-format
-msgid "CPU %d deconfigured\n"
+#: misc-utils/blkid.c:96
+#, fuzzy
+msgid " -u, --usages <list> filter by \"usage\" (e.g. -u filesystem,raid)\n"
+msgstr " l 列出已知檔案系統類型"
+
+#: misc-utils/blkid.c:97
+#, fuzzy
+msgid " -n, --match-types <list> filter by filesystem type (e.g. -n vfat,ext3)\n"
+msgstr " l 列出已知檔案系統類型"
+
+#: misc-utils/blkid.c:98
+#, fuzzy
+msgid " -D, --no-part-details don't print info from partition table\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: misc-utils/blkid.c:232
+msgid "(mounted, mtpt unknown)"
msgstr ""
-#: sys-utils/chcpu.c:204
-#, fuzzy, c-format
-msgid "invalid CPU number in CPU list: %s"
-msgstr "無效的列數"
+#: misc-utils/blkid.c:234
+#, fuzzy
+msgid "(in use)"
+msgstr "標記為使用中"
-#: sys-utils/chcpu.c:211 text-utils/col.c:120
+#: misc-utils/blkid.c:236
+#, fuzzy
+msgid "(not mounted)"
+msgstr "%s：無法掛載"
+
+#: misc-utils/blkid.c:504 misc-utils/blkid.c:510
#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options]\n"
-msgstr ""
-"\n"
-"用法：%s [選項]\n"
-"\n"
+msgid "error: %s"
+msgstr "剖析錯誤：%s"
-#: sys-utils/chcpu.c:214
-msgid ""
-"\n"
-"Options:\n"
-" -h, --help print this help\n"
-" -e, --enable <cpu-list> enable cpus\n"
-" -d, --disable <cpu-list> disable cpus\n"
-" -c, --configure <cpu-list> configure cpus\n"
-" -g, --deconfigure <cpu-list> deconfigure cpus\n"
-" -p, --dispatch <mode> set dispatching mode\n"
-" -r, --rescan trigger rescan of cpus\n"
-" -V, --version output version information and exit\n"
+#: misc-utils/blkid.c:553
+#, c-format
+msgid "%s: ambivalent result (probably more filesystems on the device, use wipefs(8) to see more details)"
msgstr ""
-#: sys-utils/chcpu.c:263
-msgid ""
-"configure, deconfigure, disable, dispatch, enable and rescan are mutually "
-"exclusive"
+#: misc-utils/blkid.c:599
+#, fuzzy, c-format
+msgid "unknown keyword in -u <list> argument: '%s'"
+msgstr "不明引數：%s"
+
+#: misc-utils/blkid.c:616
+msgid "error: -u <list> argument is empty"
msgstr ""
-#: sys-utils/chcpu.c:290
+#: misc-utils/blkid.c:765
#, fuzzy, c-format
-msgid "unsupported argument: %s"
-msgstr "%s：不明的引數：%s\n"
+msgid "unsupported output format %s"
+msgstr "不受支援的引數：%s"
-#: sys-utils/ctrlaltdel.c:20
-#, fuzzy, c-format
-msgid " %s <hard|soft>\n"
-msgstr "ç\94¨æ³\95ï¼\9actrlaltdel hard|soft\n"
+#: misc-utils/blkid.c:768 misc-utils/wipefs.c:733
+#, fuzzy
+msgid "invalid offset argument"
+msgstr "ç\84¡æ\95\88ç\9a\84å\81\8f移å¼\95æ\95¸"
-#: sys-utils/ctrlaltdel.c:54
+#: misc-utils/blkid.c:775
#, fuzzy
-msgid "You must be root to set the Ctrl-Alt-Del behaviour"
-msgstr "æ\82¨å¿\85é \88æ\98¯ root æ\89\8dè\83½è¨å®\9a Ctrl-Alt-Del å\8b\95ä½\9cã\80\82\n"
+msgid "Too many tags specified"
+msgstr "æ\9cªæ\8c\87å®\9aä»»ä½\95å\8b\95ä½\9c"
-#: sys-utils/cytune.c:91
-#, fuzzy, c-format
-msgid " %s [options] <tty> [...]\n"
-msgstr "ç\94¨æ³\95ï¼\9a%s [é\81¸é \85] è£\9dç½®â\80¦\n"
+#: misc-utils/blkid.c:781
+#, fuzzy
+msgid "invalid size argument"
+msgstr "ç\84¡æ\95\88ç\9a\84æ\99\82é\96\93å¼\95æ\95¸"
-#: sys-utils/cytune.c:93
-#, c-format
-msgid " -s, --set-threshold <num> set interruption threshold value\n"
+#: misc-utils/blkid.c:785
+msgid "Can only search for one NAME=value pair"
msgstr ""
-#: sys-utils/cytune.c:94
-#, c-format
-msgid " -g, --get-threshold display current threshold value\n"
+#: misc-utils/blkid.c:792
+msgid "-t needs NAME=value pair"
msgstr ""
-#: sys-utils/cytune.c:95
+#: misc-utils/blkid.c:798
#, fuzzy, c-format
-msgid " -S, --set-default-threshold <num> set default threshold value\n"
-msgstr "%s：%ld 為預設臨界值以及 %ld 為預設逾時值\n"
+msgid "%s from %s (libblkid %s, %s)\n"
+msgstr "%s 從 %s (libmount %s"
-#: sys-utils/cytune.c:96
-#, c-format
-msgid " -t, --set-flush <num> set flush timeout to value\n"
+#: misc-utils/blkid.c:844
+msgid "The low-level probing mode does not support 'list' output format"
msgstr ""
-#: sys-utils/cytune.c:97
-#, fuzzy, c-format
-msgid ""
-" -G, --get-glush display default flush timeout value\n"
-msgstr " -h, --help 這份簡單用法說明\n"
-
-#: sys-utils/cytune.c:98
-#, c-format
-msgid ""
-" -T, --set-default-flush <num> set the default flush timeout to value\n"
+#: misc-utils/blkid.c:857
+msgid "The low-level probing mode requires a device"
msgstr ""
-#: sys-utils/cytune.c:99
-#, c-format
-msgid " -q, --stats display statistics about the tty\n"
+#: misc-utils/blkid.c:907
+msgid "The lookup option requires a search type specified using -t"
msgstr ""
-#: sys-utils/cytune.c:100
-#, c-format
-msgid ""
-" -i, --interval <seconds> gather statistics every <seconds> "
-"interval\n"
-msgstr ""
+#: misc-utils/cal.c:411
+#, fuzzy
+msgid "invalid month argument"
+msgstr "無效的長度引數"
-#: sys-utils/cytune.c:131
-#, fuzzy, c-format
-msgid ""
-"File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
-"and the maximum transfer rate in characters/second was %f"
-msgstr ""
-"檔案 %s, 用於臨界值 %lu，在 fifo 中字元最大值是 %d,\n"
-"而轉送速率最大值(字元/秒)是 %f\n"
+#: misc-utils/cal.c:419
+#, fuzzy
+msgid "invalid week argument"
+msgstr "無效的速度引數"
+
+#: misc-utils/cal.c:421
+#, fuzzy
+msgid "illegal week value: use 1-54"
+msgstr "不合法的日號：使用 1-%d"
-#: sys-utils/cytune.c:140
+#: misc-utils/cal.c:465
#, fuzzy, c-format
-msgid ""
-"File %s, For threshold value %lu and timrout value %lu, Maximum characters "
-"in fifo were %d,\n"
-"and the maximum transfer rate in characters/second was %f"
-msgstr ""
-"檔案 %s, 用於臨界值 %lu 和 逾時值 %lu，fifo 中最大字元值為 %d,\n"
-"而轉送速率最大值(字元/秒)是 %f\n"
+msgid "failed to parse timestamp or unknown month name: %s"
+msgstr "剖析大小時失敗"
-#: sys-utils/cytune.c:169
+#: misc-utils/cal.c:474
#, fuzzy
-msgid "cannot set signal handler"
-msgstr "無法設定訊號處理程式"
+msgid "illegal day value"
+msgstr "不合法的天值"
-#: sys-utils/cytune.c:171 sys-utils/cytune.c:195 sys-utils/dmesg.c:342
-msgid "gettimeofday failed"
-msgstr "gettimeofday 失敗"
+#: misc-utils/cal.c:476 misc-utils/cal.c:500
+#, c-format
+msgid "illegal day value: use 1-%d"
+msgstr "不合法的日號：使用 1-%d"
-#: sys-utils/cytune.c:180 sys-utils/cytune.c:203
-#, fuzzy, c-format
-msgid "cannot issue CYGETMON on %s"
-msgstr "無法發放 CYGETMON 於 %s: %s\n"
+#: misc-utils/cal.c:480 misc-utils/cal.c:488
+msgid "illegal month value: use 1-12"
+msgstr "不合法的月分：使用 1-12"
-#: sys-utils/cytune.c:185 sys-utils/cytune.c:208 sys-utils/cytune.c:442
+#: misc-utils/cal.c:484
#, fuzzy, c-format
-msgid "cannot get threshold for %s"
-msgstr "無法取得臨界值用於 %s: %s\n"
+msgid "unknown month name: %s"
+msgstr "不明優先權名稱：%s。"
-#: sys-utils/cytune.c:188 sys-utils/cytune.c:213 sys-utils/cytune.c:447
-#, fuzzy, c-format
-msgid "cannot get timeout for %s"
-msgstr "無法取得逾時值用於 %s: %s\n"
+#: misc-utils/cal.c:491 misc-utils/cal.c:495
+#, fuzzy
+msgid "illegal year value"
+msgstr "不合法的天值"
+
+#: misc-utils/cal.c:493
+#, fuzzy
+msgid "illegal year value: use positive integer"
+msgstr "不合法的年分：使用 1-9999"
-#: sys-utils/cytune.c:246
+#: misc-utils/cal.c:529 misc-utils/cal.c:542
#, c-format
-msgid ""
-"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+msgid "illegal week value: year %d doesn't have week %d"
msgstr ""
-"%s：%lu 間隔值，%lu/%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大"
-"值，%lu 當前值\n"
-#: sys-utils/cytune.c:252
-#, c-format
-msgid " %f int/sec; %f rec, %f send (char/sec)\n"
-msgstr " %f 間隔/秒；%f 記錄，%f 發送 (字元/秒)\n"
+#: misc-utils/cal.c:1116
+#, fuzzy, c-format
+msgid " %s [options] [[[day] month] year]\n"
+msgstr " %s [選項] [[[天] 月] 年]\n"
-#: sys-utils/cytune.c:255
-#, c-format
-msgid ""
-"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#: misc-utils/cal.c:1117
+#, fuzzy, c-format
+msgid " %s [options] <timestamp|monthname>\n"
+msgstr " %s [選項] <filename>\n"
+
+#: misc-utils/cal.c:1120
+msgid "Display a calendar, or some part of it.\n"
msgstr ""
-"%s：%lu 間隔值，%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大值，%lu 當"
-"前值\n"
-#: sys-utils/cytune.c:260
-#, c-format
-msgid " %f int/sec; %f rec (char/sec)\n"
-msgstr " %f 間隔/秒；%f 記錄 (字元/秒)\n"
+#: misc-utils/cal.c:1121
+msgid "Without any arguments, display the current month.\n"
+msgstr ""
-#: sys-utils/cytune.c:325
+#: misc-utils/cal.c:1124
#, fuzzy
-msgid "Invalid interval value"
-msgstr "無效的間隔值：%s\n"
+msgid " -1, --one show only a single month (default)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/cytune.c:327
-#, fuzzy, c-format
-msgid "Invalid interval value: %d"
-msgstr "無效的間隔值：%s\n"
+#: misc-utils/cal.c:1125
+#, fuzzy
+msgid " -3, --three show three months spanning the date\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/cytune.c:335
+#: misc-utils/cal.c:1126
#, fuzzy
-msgid "Invalid set value"
-msgstr "無效的設定值：%s\n"
+msgid " -n, --months <num> show num months starting with date's month\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/cytune.c:337
-#, fuzzy, c-format
-msgid "Invalid set value: %d"
-msgstr "無效的設定值：%s\n"
+#: misc-utils/cal.c:1127
+#, fuzzy
+msgid " -S, --span span the date when displaying multiple months\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-#: sys-utils/cytune.c:345
+#: misc-utils/cal.c:1128
#, fuzzy
-msgid "Invalid default value"
-msgstr "無效的預設值：%s\n"
+msgid " -s, --sunday Sunday as first day of week\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/cytune.c:347
-#, fuzzy, c-format
-msgid "Invalid default value: %d"
-msgstr "無效的預設值：%s\n"
+#: misc-utils/cal.c:1129
+#, fuzzy
+msgid " -m, --monday Monday as first day of week\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/cytune.c:356
+#: misc-utils/cal.c:1130
#, fuzzy
-msgid "Invalid set time value"
-msgstr "無效的設定時間值：%s\n"
+msgid " -j, --julian use day-of-year for all calendars\n"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: sys-utils/cytune.c:358
-#, fuzzy, c-format
-msgid "Invalid set time value: %d"
-msgstr "無效的設定時間值：%s\n"
+#: misc-utils/cal.c:1131
+msgid " --reform <val> Gregorian reform date (1752|gregorian|iso|julian)\n"
+msgstr ""
-#: sys-utils/cytune.c:367
+#: misc-utils/cal.c:1132
#, fuzzy
-msgid "Invalid default time value"
-msgstr "無效的預設時間值：%s\n"
+msgid " --iso alias for --reform=iso\n"
+msgstr " t - 分割表以原始格式顯示"
-#: sys-utils/cytune.c:369
+#: misc-utils/cal.c:1133
+#, fuzzy
+msgid " -y, --year show the whole year\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: misc-utils/cal.c:1134
+#, fuzzy
+msgid " -Y, --twelve show the next twelve months\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: misc-utils/cal.c:1135
+msgid " -w, --week[=<num>] show US or ISO-8601 week numbers\n"
+msgstr ""
+
+#: misc-utils/cal.c:1137
+#, fuzzy, c-format
+msgid " --color[=<when>] colorize messages (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: misc-utils/fincore.c:61
+#, fuzzy
+msgid "file data resident in memory in pages"
+msgstr "共用記憶體識別號：%d\n"
+
+#: misc-utils/fincore.c:62
+#, fuzzy
+msgid "file data resident in memory in bytes"
+msgstr "共用記憶體識別號：%d\n"
+
+#: misc-utils/fincore.c:63
+#, fuzzy
+msgid "size of the file"
+msgstr "大小的裝置"
+
+#: misc-utils/fincore.c:64
+#, fuzzy
+msgid "file name"
+msgstr "檔名"
+
+#: misc-utils/fincore.c:174
+#, fuzzy, c-format
+msgid "failed to do mincore: %s"
+msgstr "讀取符號連結時失敗：%s"
+
+#: misc-utils/fincore.c:210
+#, fuzzy, c-format
+msgid "failed to do mmap: %s"
+msgstr "讀取時失敗：%s"
+
+#: misc-utils/fincore.c:236
#, fuzzy, c-format
-msgid "Invalid default time value: %d"
-msgstr "無效的預設時間值：%s\n"
+msgid "failed to open: %s"
+msgstr "%s：開啟失敗：%s\n"
-#: sys-utils/cytune.c:412
+#: misc-utils/fincore.c:241
#, fuzzy, c-format
-msgid "cannot set %s to threshold %d"
-msgstr "無法設定 %s 為臨界值 %d: %s\n"
+msgid "failed to do fstat: %s"
+msgstr "讀取時失敗：%s"
-#: sys-utils/cytune.c:426
+#: misc-utils/fincore.c:262
#, fuzzy, c-format
-msgid "cannot set %s to time threshold %d"
-msgstr "無法設定 %s 到時間臨界值 %d: %s\n"
+msgid " %s [options] file...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: misc-utils/fincore.c:265
+#, fuzzy
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: misc-utils/fincore.c:266
+#, fuzzy
+msgid " -b, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: misc-utils/fincore.c:267
+#, fuzzy
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/cytune.c:450
+#: misc-utils/fincore.c:268
+#, fuzzy
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: misc-utils/fincore.c:269
+#, fuzzy
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: misc-utils/fincore.c:338 sys-utils/losetup.c:820
+#, fuzzy
+msgid "no file specified"
+msgstr "沒有檔案指定的"
+
+#: misc-utils/findfs.c:28
#, c-format
-msgid "%s: %ld current threshold and %ld current timeout\n"
-msgstr "%s：%ld 為目前臨界值以及 %ld 為目前逾時值\n"
+msgid " %s [options] {LABEL,UUID,PARTUUID,PARTLABEL}=<value>\n"
+msgstr ""
-#: sys-utils/cytune.c:453
+#: misc-utils/findfs.c:32
+#, fuzzy
+msgid "Find a filesystem by label or UUID.\n"
+msgstr "強制檢查 %s 檔案系統。\n"
+
+#: misc-utils/findfs.c:74
#, c-format
-msgid "%s: %ld default threshold and %ld default timeout\n"
-msgstr "%s：%ld 為預設臨界值以及 %ld 為預設逾時值\n"
+msgid "unable to resolve '%s'"
+msgstr "無法解決「%s」"
-#: sys-utils/dmesg.c:69
+#: misc-utils/findmnt.c:99
#, fuzzy
-msgid "system is unusable"
-msgstr "這個分割區無法使用"
+msgid "source device"
+msgstr "來源裝置"
-#: sys-utils/dmesg.c:70
-msgid "action must be taken immediately"
-msgstr ""
+#: misc-utils/findmnt.c:100
+#, fuzzy
+msgid "mountpoint"
+msgstr "mountpoint"
-#: sys-utils/dmesg.c:71
-msgid "critical conditions"
-msgstr ""
+#: misc-utils/findmnt.c:101 misc-utils/lsblk.c:160
+#, fuzzy
+msgid "filesystem type"
+msgstr "檔案系統型態"
-#: sys-utils/dmesg.c:72
+#: misc-utils/findmnt.c:102
#, fuzzy
-msgid "error conditions"
-msgstr "關閉 %s 時發生錯誤"
+msgid "all mount options"
+msgstr "所有掛載選項"
-#: sys-utils/dmesg.c:73
+#: misc-utils/findmnt.c:103
#, fuzzy
-msgid "warning conditions"
-msgstr "警告：分割區 %s "
+msgid "VFS specific mount options"
+msgstr "VFS 特定的掛載選項"
-#: sys-utils/dmesg.c:74
-msgid "normal but significant condition"
-msgstr ""
+#: misc-utils/findmnt.c:104
+#, fuzzy
+msgid "FS specific mount options"
+msgstr "FS 特定的掛載選項"
-#: sys-utils/dmesg.c:75
-msgid "informational"
-msgstr ""
+#: misc-utils/findmnt.c:105
+#, fuzzy
+msgid "filesystem label"
+msgstr "檔案系統標貼"
-#: sys-utils/dmesg.c:76
-msgid "debug-level messages"
-msgstr ""
+#: misc-utils/findmnt.c:106 misc-utils/lsblk.c:167
+#, fuzzy
+msgid "filesystem UUID"
+msgstr "檔案系統 UUID"
-#: sys-utils/dmesg.c:90
+#: misc-utils/findmnt.c:107
#, fuzzy
-msgid "kernel messages"
-msgstr "訊息"
+msgid "partition label"
+msgstr "分割標貼"
-#: sys-utils/dmesg.c:91
-msgid "random user-level messages"
-msgstr ""
+#: misc-utils/findmnt.c:109 misc-utils/lsblk.c:156
+#, fuzzy
+msgid "major:minor device number"
+msgstr "主要的：次級裝置數字"
-#: sys-utils/dmesg.c:92
+#: misc-utils/findmnt.c:110
#, fuzzy
-msgid "mail system"
-msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+msgid "action detected by --poll"
+msgstr "動作偵測到由 --poll"
-#: sys-utils/dmesg.c:93
-msgid "system daemons"
-msgstr ""
+#: misc-utils/findmnt.c:111
+#, fuzzy
+msgid "old mount options saved by --poll"
+msgstr "舊的掛載選項儲存的由 --poll"
-#: sys-utils/dmesg.c:94
-msgid "security/authorization messages"
-msgstr ""
+#: misc-utils/findmnt.c:112
+#, fuzzy
+msgid "old mountpoint saved by --poll"
+msgstr "舊的 mountpoint 儲存的由 --poll"
-#: sys-utils/dmesg.c:95
-msgid "messages generated internally by syslogd"
-msgstr ""
+#: misc-utils/findmnt.c:113 misc-utils/lsblk.c:159
+#, fuzzy
+msgid "filesystem size"
+msgstr "檔案系統大小"
-#: sys-utils/dmesg.c:96
-msgid "line printer subsystem"
-msgstr ""
+#: misc-utils/findmnt.c:114 misc-utils/lsblk.c:158
+#, fuzzy
+msgid "filesystem size available"
+msgstr "檔案系統大小可用"
-#: sys-utils/dmesg.c:97
-msgid "network news subsystem"
-msgstr ""
+#: misc-utils/findmnt.c:115 misc-utils/lsblk.c:161
+#, fuzzy
+msgid "filesystem size used"
+msgstr "檔案系統大小使用"
-#: sys-utils/dmesg.c:98
-msgid "UUCP subsystem"
-msgstr ""
+#: misc-utils/findmnt.c:116 misc-utils/lsblk.c:162
+#, fuzzy
+msgid "filesystem use percentage"
+msgstr "檔案系統使用百分比"
-#: sys-utils/dmesg.c:99
+#: misc-utils/findmnt.c:117
#, fuzzy
-msgid "clock daemon"
-msgstr "無法守護程式化"
+msgid "filesystem root"
+msgstr "檔案系統根"
-#: sys-utils/dmesg.c:100
-msgid "security/authorization messages (private)"
-msgstr ""
+#: misc-utils/findmnt.c:118
+#, fuzzy
+msgid "task ID"
+msgstr "任務識別號"
-#: sys-utils/dmesg.c:101
+#: misc-utils/findmnt.c:119
#, fuzzy
-msgid "ftp daemon"
-msgstr "無法守護程式化"
+msgid "mount ID"
+msgstr "掛載"
-#: sys-utils/dmesg.c:150
-msgid ""
-" -C, --clear clear the kernel ring buffer\n"
-" -c, --read-clear read and clear all messages\n"
-" -D, --console-off disable printing messages to console\n"
-" -d, --show-delta show time delta between printed messages\n"
-" -E, --console-on enable printing messages to console\n"
-" -F, --file <file> use the file instead of the kernel log buffer\n"
-" -f, --facility <list> restrict output to defined facilities\n"
-" -h, --help display this help and exit\n"
-" -k, --kernel display kernel messages\n"
-" -l, --level <list> restrict output to defined levels\n"
-" -n, --console-level <level> set level of messages printed to console\n"
-" -r, --raw print the raw message buffer\n"
-" -s, --buffer-size <size> buffer size to query the kernel ring buffer\n"
-" -T, --ctime show human readable timestamp (could be \n"
-" inaccurate if you have used SUSPEND/RESUME)\n"
-" -t, --notime don't print messages timestamp\n"
-" -u, --userspace display userspace messages\n"
-" -V, --version output version information and exit\n"
-" -x, --decode decode facility and level to readable string\n"
-msgstr ""
-
-#: sys-utils/dmesg.c:170
-msgid ""
-"\n"
-"Supported log facilities:\n"
+#: misc-utils/findmnt.c:120
+#, fuzzy
+msgid "optional mount fields"
+msgstr "mount：掛載時失敗"
+
+#: misc-utils/findmnt.c:121
+#, fuzzy
+msgid "VFS propagation flags"
+msgstr "分割旗標"
+
+#: misc-utils/findmnt.c:122
+msgid "dump(8) period in days [fstab only]"
msgstr ""
-#: sys-utils/dmesg.c:177
-msgid ""
-"\n"
-"Supported log levels (priorities):\n"
+#: misc-utils/findmnt.c:123
+msgid "pass number on parallel fsck(8) [fstab only]"
msgstr ""
-#: sys-utils/dmesg.c:221
+#: misc-utils/findmnt.c:333
#, fuzzy, c-format
-msgid "failed to parse level '%s'"
-msgstr "剖析 %s %s 時失敗"
+msgid "unknown action: %s"
+msgstr "不明動作：%s"
-#: sys-utils/dmesg.c:223
-#, fuzzy, c-format
-msgid "unknown level '%s'"
-msgstr "不明直欄：%s"
+#: misc-utils/findmnt.c:643
+#, fuzzy
+msgid "mount"
+msgstr "掛載"
-#: sys-utils/dmesg.c:259
-#, fuzzy, c-format
-msgid "failed to parse facility '%s'"
-msgstr "剖析 %s %s 時失敗"
+#: misc-utils/findmnt.c:646
+#, fuzzy
+msgid "umount"
+msgstr "umount"
-#: sys-utils/dmesg.c:261
-#, fuzzy, c-format
-msgid "unknown facility '%s'"
-msgstr "不明方向「%s」"
+#: misc-utils/findmnt.c:649
+#, fuzzy
+msgid "remount"
+msgstr "remount"
-#: sys-utils/dmesg.c:340
+#: misc-utils/findmnt.c:652
#, fuzzy
-msgid "sysinfo failed"
-msgstr "fsync 失敗"
+msgid "move"
+msgstr "移動"
-#: sys-utils/dmesg.c:358
-#, fuzzy, c-format
-msgid "cannot open: %s"
-msgstr "無法開啟 %s"
+#: misc-utils/findmnt.c:814 misc-utils/findmnt.c:1084 sys-utils/eject.c:718
+#: sys-utils/mount.c:369
+#, fuzzy
+msgid "failed to initialize libmount table"
+msgstr "初始化 libmount 表格時失敗"
-#: sys-utils/dmesg.c:360
+#: misc-utils/findmnt.c:841 text-utils/hexdump-parse.c:84
#, fuzzy, c-format
-msgid "cannot stat: %s"
-msgstr "ç\84¡æ³\95è\98å\88¥ã\80\8c%sã\80\8dç\8b\80æ\85\8b"
+msgid "can't read %s"
+msgstr "ç\84¡æ³\95è®\80å\8f\96 %s"
-#: sys-utils/dmesg.c:364
-#, fuzzy, c-format
-msgid "cannot mmap: %s"
-msgstr "無法開啟 %s"
+#: misc-utils/findmnt.c:1024 misc-utils/findmnt.c:1090
+#: misc-utils/findmnt-verify.c:95 misc-utils/findmnt-verify.c:487
+#: sys-utils/fstrim.c:285 sys-utils/mount.c:127 sys-utils/mount.c:175
+#: sys-utils/mount.c:242 sys-utils/swapoff.c:55 sys-utils/swapoff.c:154
+#: sys-utils/swapon.c:248 sys-utils/swapon.c:278 sys-utils/swapon.c:737
+#: sys-utils/umount.c:187
+msgid "failed to initialize libmount iterator"
+msgstr "初始化 libmount 迭代器時失敗"
-#: sys-utils/dmesg.c:458 term-utils/script.c:301 term-utils/script.c:393
+#: misc-utils/findmnt.c:1096
#, fuzzy
-msgid "write failed"
-msgstr "寫入失敗：%s"
-
-#: sys-utils/dmesg.c:696
-msgid ""
-"clear, read-clear, console-level, console-on, and console-off options are "
-"mutually exclusive"
-msgstr ""
+msgid "failed to initialize libmount tabdiff"
+msgstr "初始化 libmount tabdiff 時失敗"
-#: sys-utils/dmesg.c:747
+#: misc-utils/findmnt.c:1124 misc-utils/kill.c:408
#, fuzzy
-msgid "failed to parse buffer size"
-msgstr "剖析 %s %s 時失敗"
+msgid "poll() failed"
+msgstr "意見調查() 失敗"
-#: sys-utils/dmesg.c:788
+#: misc-utils/findmnt.c:1199
+#, fuzzy, c-format
msgid ""
-"--raw can't be used together with level, facility, decode, delta, ctime or "
-"notime options"
-msgstr ""
-
-#: sys-utils/dmesg.c:792
-msgid "--notime can't be used together with ctime "
+" %1$s [options]\n"
+" %1$s [options] <device> | <mountpoint>\n"
+" %1$s [options] <device> <mountpoint>\n"
+" %1$s [options] [--source <device>] [--target <path> | --mountpoint <dir>]\n"
msgstr ""
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
-#: sys-utils/dmesg.c:819
+#: misc-utils/findmnt.c:1206
#, fuzzy
-msgid "unsupported command"
-msgstr "æ²\92æ\9c\89å\91½ä»¤ï¼\9f\n"
+msgid "Find a (mounted) filesystem.\n"
+msgstr "æª\94æ¡\88系統å\9e\8bæ\85\8b"
-#: sys-utils/dmesg.c:824
+#: misc-utils/findmnt.c:1209
#, fuzzy
-msgid "klogctl failed"
-msgstr "msgctl 失敗"
-
-#: sys-utils/fallocate.c:61
-#, fuzzy, c-format
-msgid " %s [options] <filename>\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid " -s, --fstab search in static table of filesystems\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/fallocate.c:64
+#: misc-utils/findmnt.c:1210
#, fuzzy
msgid ""
-" -h, --help this help\n"
-" -n, --keep-size don't modify the length of the file\n"
-" -p, --punch-hole punch holes in the file\n"
-" -o, --offset <num> offset of the allocation, in bytes\n"
-" -l, --length <num> length of the allocation, in bytes\n"
+" -m, --mtab search in table of mounted filesystems\n"
+" (includes user space mount options)\n"
msgstr ""
-" -h, --help 這個說明\n"
-" -n, --keep-size 不修改檔案的長度\n"
-" -o, --offset <num> 以位元組為單位的配置偏移值\n"
-" -l, --length <num> 以位元組為單位的配置長度\n"
+"\n"
+"選項：\n"
+" -s, --fstab 搜尋在中靜態表格的檔案系統\n"
+" -m, --mtab 搜尋在中表格的掛載的檔案系統\n"
+" -k, --kernel 搜尋在中內核表格的掛載\n"
+" 檔案系統 (預設)\n"
+"\n"
-#: sys-utils/fallocate.c:70
-#, c-format
+#: misc-utils/findmnt.c:1212
+#, fuzzy
msgid ""
-"\n"
-"For more information see fallocate(1).\n"
+" -k, --kernel search in kernel table of mounted\n"
+" filesystems (default)\n"
msgstr ""
"\n"
-"要獲得更多資訊請參看 fallocate(1)。\n"
-
-#: sys-utils/fallocate.c:132
-msgid "no length argument specified"
-msgstr "未指定任何長度引數"
-
-#: sys-utils/fallocate.c:134
-msgid "invalid length value specified"
-msgstr "指定了無效的長度值"
-
-#: sys-utils/fallocate.c:136
-msgid "invalid offset value specified"
-msgstr "指定了無效的偏移值"
-
-#: sys-utils/fallocate.c:138
-msgid "no filename specified."
-msgstr "未指定任何檔名。"
+"選項：\n"
+" -s, --fstab 搜尋在中靜態表格的檔案系統\n"
+" -m, --mtab 搜尋在中表格的掛載的檔案系統\n"
+" -k, --kernel 搜尋在中內核表格的掛載\n"
+" 檔案系統 (預設)\n"
+"\n"
-#: sys-utils/fallocate.c:143 sys-utils/fsfreeze.c:96 sys-utils/fstrim.c:130
-msgid "unexpected number of arguments"
-msgstr "未預期的引數數量"
+#: misc-utils/findmnt.c:1215
+#, fuzzy
+msgid " -p, --poll[=<list>] monitor changes in table of mounted filesystems\n"
+msgstr ""
+" -p, --poll [=<list>] 監視器變更在中表格的掛載的檔案系統\n"
+" -w, --timeout<num> 上限在中毫秒該 --poll 將區塊\n"
+"\n"
-#: sys-utils/fallocate.c:163
-msgid "keep size mode (-n option) unsupported"
-msgstr "保持大小模式 (-n 選項) 未受支援"
+#: misc-utils/findmnt.c:1216
+#, fuzzy
+msgid " -w, --timeout <num> upper limit in milliseconds that --poll will block\n"
+msgstr ""
+" -p, --poll [=<list>] 監視器變更在中表格的掛載的檔案系統\n"
+" -w, --timeout<num> 上限在中毫秒該 --poll 將區塊\n"
+"\n"
-#: sys-utils/fallocate.c:164
-#, c-format
-msgid "%s: fallocate failed"
-msgstr "%s：fallocate 失敗"
+#: misc-utils/findmnt.c:1219
+#, fuzzy
+msgid " -A, --all disable all built-in filters, print all filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#: sys-utils/flock.c:50
-#, c-format
-msgid ""
-" %1$s [options] <file descriptor number>\n"
-" %1$s [options] <file> -c <command>\n"
-" %1$s [options} <directory> -c <command>\n"
-msgstr ""
+#: misc-utils/findmnt.c:1220
+#, fuzzy
+msgid " -a, --ascii use ASCII chars for tree formatting\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/flock.c:55
-msgid " -s --shared get a shared lock\n"
-msgstr ""
+#: misc-utils/findmnt.c:1221
+#, fuzzy
+msgid " -b, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/flock.c:56
-msgid " -x --exclusive get an exclusive lock (default)\n"
+#: misc-utils/findmnt.c:1222
+msgid " -C, --nocanonicalize don't canonicalize when comparing paths\n"
msgstr ""
-#: sys-utils/flock.c:57
-msgid " -u --unlock remove a lock\n"
+#: misc-utils/findmnt.c:1223
+msgid " -c, --canonicalize canonicalize printed paths\n"
msgstr ""
-#: sys-utils/flock.c:58
-msgid " -n --nonblock fail rather than wait\n"
-msgstr ""
+#: misc-utils/findmnt.c:1224
+#, fuzzy
+msgid " -D, --df imitate the output of df(1)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/flock.c:59
-msgid " -w --timeout <secs> wait for a limited amount of time\n"
+#: misc-utils/findmnt.c:1225
+msgid " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
msgstr ""
-#: sys-utils/flock.c:60
+#: misc-utils/findmnt.c:1226
msgid ""
-" -o --close close file descriptor before running command\n"
+" -e, --evaluate convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
+" to device names\n"
msgstr ""
-#: sys-utils/flock.c:61
-msgid ""
-" -c --command <command> run a single command string through the shell\n"
+#: misc-utils/findmnt.c:1228
+msgid " -F, --tab-file <path> alternative file for -s, -m or -k options\n"
msgstr ""
-#: sys-utils/flock.c:84
+#: misc-utils/findmnt.c:1229
#, fuzzy
-msgid "timeout cannot be zero"
-msgstr "mount：無法設定使用者識別編號：%s"
-
-#: sys-utils/flock.c:121
-#, fuzzy, c-format
-msgid "cannot open lock file %s"
-msgstr "無法開啟檔案 '%s'"
+msgid " -f, --first-only print the first found filesystem only\n"
+msgstr " l 列出已知檔案系統類型"
-#: sys-utils/flock.c:213
-#, fuzzy, c-format
-msgid "%s requires exactly one command argument"
-msgstr "%s：%s 需要剛好一個指令引數\n"
+#: misc-utils/findmnt.c:1230
+#, fuzzy
+msgid " -i, --invert invert the sense of matching\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/flock.c:234
+#: misc-utils/findmnt.c:1231 misc-utils/lslocks.c:535 sys-utils/lsns.c:904
+#: sys-utils/rfkill.c:581
#, fuzzy
-msgid "requires file descriptor, file or directory"
-msgstr "%s：需要檔案描述符號、檔案或目錄\n"
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/flock.c:323 sys-utils/swapon.c:298
-msgid "waitpid failed"
-msgstr "waitpid 失敗"
+#: misc-utils/findmnt.c:1232 sys-utils/lsns.c:905
+#, fuzzy
+msgid " -l, --list use list format output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/fsfreeze.c:42 sys-utils/fstrim.c:57
-#, fuzzy, c-format
-msgid " %s [options] <mount point>\n"
+#: misc-utils/findmnt.c:1233
+msgid " -N, --task <tid> use alternative namespace (/proc/<tid>/mountinfo file)\n"
msgstr ""
-"用法：%s [選項] <掛載點>\n"
-"\n"
-"選項：\n"
-#: sys-utils/fsfreeze.c:45
+#: misc-utils/findmnt.c:1234
#, fuzzy
-msgid ""
-" -h, --help this help\n"
-" -f, --freeze freeze the filesystem\n"
-" -u, --unfreeze unfreeze the filesystem\n"
-msgstr ""
-" -h, --help 這個說明\n"
-" -f, --freeze 凍結檔案系統\n"
-" -u, --unfreeze 解除檔案系統凍結\n"
+msgid " -n, --noheadings don't print column headings\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/fsfreeze.c:49
-msgid ""
-"\n"
-"For more information see fsfreeze(8).\n"
+#: misc-utils/findmnt.c:1235
+msgid " -O, --options <list> limit the set of filesystems by mount options\n"
msgstr ""
-"\n"
-"要獲得更多資訊請參看 fsfreeze(8)。\n"
-#: sys-utils/fsfreeze.c:90
-msgid "no action specified"
-msgstr "未指定任何動作"
+#: misc-utils/findmnt.c:1236
+#, fuzzy
+msgid " -o, --output <list> the output columns to be shown\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/fsfreeze.c:92
-msgid "no filename specified"
-msgstr "未指定任何檔名"
+#: misc-utils/findmnt.c:1237
+#, fuzzy
+msgid " --output-all output all available columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/fsfreeze.c:105
-#, c-format
-msgid "%s: fstat failed"
-msgstr "%s：fstat 失敗"
+#: misc-utils/findmnt.c:1238
+#, fuzzy
+msgid " -P, --pairs use key=\"value\" output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/fsfreeze.c:110
-#, c-format
-msgid "%s: is not a directory"
-msgstr "%s：並非目錄"
+#: misc-utils/findmnt.c:1239
+#, fuzzy
+msgid " --pseudo print only pseudo-filesystems\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/fsfreeze.c:116
-#, c-format
-msgid "%s: freeze failed"
-msgstr "%s：凍結時失敗"
+#: misc-utils/findmnt.c:1240
+#, fuzzy
+msgid " -R, --submounts print all submounts for the matching filesystems\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/fsfreeze.c:121
-#, c-format
-msgid "%s: unfreeze failed"
-msgstr "%s：解除凍結時失敗"
+#: misc-utils/findmnt.c:1241
+#, fuzzy
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: misc-utils/findmnt.c:1242
+#, fuzzy
+msgid " --real print only real filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#: sys-utils/fstrim.c:60
+#: misc-utils/findmnt.c:1243
msgid ""
-" -h, --help this help\n"
-" -o, --offset <num> offset in bytes to discard from\n"
-" -l, --length <num> length of bytes to discard from the offset\n"
-" -m, --minimum <num> minimum extent length to discard\n"
-" -v, --verbose print number of discarded bytes\n"
+" -S, --source <string> the device to mount (by name, maj:min, \n"
+" LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
msgstr ""
-#: sys-utils/fstrim.c:66
+#: misc-utils/findmnt.c:1245
#, fuzzy
-msgid ""
-"\n"
-"For more information see fstrim(8).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 findmnt(1)。\n"
-
-#: sys-utils/fstrim.c:102
-#, fuzzy, c-format
-msgid "failed to parse length: %s"
-msgstr "剖析 %s %s 時失敗"
-
-#: sys-utils/fstrim.c:107
-#, fuzzy, c-format
-msgid "failed to parse offset: %s"
-msgstr "剖析 %s %s 時失敗"
+msgid " -T, --target <path> the path to the filesystem to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/fstrim.c:112
-#, fuzzy, c-format
-msgid "failed to parse minimum extent length: %s"
-msgstr "讀取時序檔案 %s 時失敗"
+#: misc-utils/findmnt.c:1246
+#, fuzzy
+msgid " --tree enable tree format output is possible\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/fstrim.c:125
+#: misc-utils/findmnt.c:1247
#, fuzzy
-msgid "no mountpoint specified."
-msgstr "未指定任何動作"
+msgid " -M, --mountpoint <dir> the mountpoint directory\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
-#: sys-utils/fstrim.c:137 sys-utils/mountpoint.c:185
-#, fuzzy, c-format
-msgid "%s: not a directory"
-msgstr "%s：並非目錄"
+#: misc-utils/findmnt.c:1248
+#, fuzzy
+msgid " -t, --types <list> limit the set of filesystems by FS types\n"
+msgstr " l 列出已知檔案系統類型"
-#: sys-utils/fstrim.c:144
-#, fuzzy, c-format
-msgid "%s: FITRIM ioctl failed"
-msgstr "%s：寫入失敗"
+#: misc-utils/findmnt.c:1249
+#, fuzzy
+msgid " -U, --uniq ignore filesystems with duplicate target\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#. TRANSLATORS: The standard value here is a very large number.
-#: sys-utils/fstrim.c:148
-#, c-format
-msgid "%s: %<PRIu64> bytes were trimmed\n"
-msgstr ""
+#: misc-utils/findmnt.c:1250 misc-utils/lslocks.c:542 sys-utils/lsns.c:911
+#, fuzzy
+msgid " -u, --notruncate don't truncate text in columns\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/ipcmk.c:69
-msgid " -M, --shmem <size> create shared memory segment of size <size>\n"
-msgstr ""
+#: misc-utils/findmnt.c:1251
+#, fuzzy
+msgid " -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/ipcmk.c:70
-msgid ""
-" -S, --semaphore <nsems> create semaphore array with <nsems> elements\n"
-msgstr ""
+#: misc-utils/findmnt.c:1254
+#, fuzzy
+msgid " -x, --verify verify mount table content (default is fstab)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/ipcmk.c:71
+#: misc-utils/findmnt.c:1255
#, fuzzy
-msgid " -Q, --queue create message queue\n"
-msgstr " -Q, --quiet-output 沒有一般的輸出\n"
+msgid " --verbose print more details\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/ipcmk.c:72
-msgid ""
-" -p, --mode <mode> permission for the resource (default is 0644)\n"
-msgstr ""
+#: misc-utils/findmnt.c:1390
+#, c-format
+msgid "unknown direction '%s'"
+msgstr "不明方向「%s」"
-#: sys-utils/ipcmk.c:105
+#: misc-utils/findmnt.c:1466
#, fuzzy
-msgid "failed to parse size"
-msgstr "剖析 pid 時失敗"
+msgid "invalid TID argument"
+msgstr "無效的 TID 引數"
-#: sys-utils/ipcmk.c:112
+#: misc-utils/findmnt.c:1545
#, fuzzy
-msgid "failed to parse elements"
-msgstr "剖析 %s %s 時失敗"
+msgid "--poll accepts only one file, but more specified by --tab-file"
+msgstr "--poll 接受只有一個檔案，但是更多指定的由 --tab-file"
-#: sys-utils/ipcmk.c:136
-msgid "create share memory failed"
-msgstr "建立共享記憶體時失敗"
+#: misc-utils/findmnt.c:1549
+msgid "options --target and --source can't be used together with command line element that is not an option"
+msgstr "選項 --target 和 --source 無法與不是選項的命令列元素一起使用"
-#: sys-utils/ipcmk.c:138
-#, c-format
-msgid "Shared memory id: %d\n"
-msgstr "共用記憶體識別號：%d\n"
+#: misc-utils/findmnt.c:1602 sys-utils/fstrim.c:265
+msgid "failed to initialize libmount cache"
+msgstr "初始化 libmount 快取時失敗"
-#: sys-utils/ipcmk.c:144
-msgid "create message queue failed"
-msgstr "建立訊息佇列時失敗"
+#: misc-utils/findmnt.c:1646
+#, fuzzy, c-format
+msgid "%s column is requested, but --poll is not enabled"
+msgstr "%s 欄被要求的，但是 --poll 未被已啟用"
+
+#: misc-utils/findmnt-verify.c:119
+#, fuzzy
+msgid "target specified more than once"
+msgstr "您指定了比磁碟上還多的磁柱數"
-#: sys-utils/ipcmk.c:146
+#: misc-utils/findmnt-verify.c:121
#, c-format
-msgid "Message queue id: %d\n"
-msgstr "訊息佇列識別號：%d\n"
+msgid "wrong order: %s specified before %s"
+msgstr ""
-#: sys-utils/ipcmk.c:152
-msgid "create semaphore failed"
-msgstr "建立號誌時失敗"
+#: misc-utils/findmnt-verify.c:135
+msgid "undefined target (fs_file)"
+msgstr ""
-#: sys-utils/ipcmk.c:154
+#: misc-utils/findmnt-verify.c:142
#, c-format
-msgid "Semaphore id: %d\n"
-msgstr "號誌識別號：%d\n"
-
-#: sys-utils/ipcrm.c:52
-msgid " -m, --shmem-id <id> remove shared memory segment by shmid\n"
+msgid "non-canonical target path (real: %s)"
msgstr ""
-#: sys-utils/ipcrm.c:53
-msgid " -M, --shmem-key <key> remove shared memory segment by key\n"
+#: misc-utils/findmnt-verify.c:147
+#, c-format
+msgid "unreachable on boot required target: %m"
msgstr ""
-#: sys-utils/ipcrm.c:54
-msgid " -q, --queue-id <id> remove message queue by id\n"
+#: misc-utils/findmnt-verify.c:149
+#, fuzzy, c-format
+msgid "unreachable target: %m"
+msgstr "無法讀取 %s"
+
+#: misc-utils/findmnt-verify.c:153
+#, fuzzy
+msgid "target is not a directory"
+msgstr "%s：並非目錄"
+
+#: misc-utils/findmnt-verify.c:155
+msgid "target exists"
msgstr ""
-#: sys-utils/ipcrm.c:55
-msgid " -Q, --queue-key <key> remove message queue by key\n"
+#: misc-utils/findmnt-verify.c:167
+#, c-format
+msgid "unreachable on boot required source: %s=%s"
msgstr ""
-#: sys-utils/ipcrm.c:56
-msgid " -s, --semaphore-id <id> remove semaprhore by id\n"
+#: misc-utils/findmnt-verify.c:169
+#, fuzzy, c-format
+msgid "unreachable: %s=%s"
+msgstr "讀取失敗：%s"
+
+#: misc-utils/findmnt-verify.c:171
+#, fuzzy, c-format
+msgid "%s=%s translated to %s"
+msgstr "%s 被關聯的與 %s\n"
+
+#: misc-utils/findmnt-verify.c:192
+msgid "undefined source (fs_spec)"
msgstr ""
-#: sys-utils/ipcrm.c:57
-msgid " -S, --semaphore-key <key> remove semaprhore by key\n"
+#: misc-utils/findmnt-verify.c:201
+#, fuzzy, c-format
+msgid "unsupported source tag: %s"
+msgstr "不受支援的引數：%s"
+
+#: misc-utils/findmnt-verify.c:208
+#, c-format
+msgid "do not check %s source (pseudo/net)"
msgstr ""
-#: sys-utils/ipcrm.c:58
-msgid " -a, --all[=<shm|msg|sem>] remove all\n"
+#: misc-utils/findmnt-verify.c:211
+#, fuzzy, c-format
+msgid "unreachable source: %s: %m"
+msgstr "無法開啟「%s」：%s"
+
+#: misc-utils/findmnt-verify.c:214
+#, c-format
+msgid "non-bind mount source %s is a directory or regular file"
msgstr ""
-#: sys-utils/ipcrm.c:59
-#, fuzzy
-msgid " -v, --verbose explain what is being done\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: misc-utils/findmnt-verify.c:217
+#, fuzzy, c-format
+msgid "source %s is not a block device"
+msgstr " %s 並非區塊裝置"
-#: sys-utils/ipcrm.c:79
+#: misc-utils/findmnt-verify.c:219
#, fuzzy, c-format
-msgid "removing shared memory segment id `%d'\n"
-msgstr ""
-"\n"
-"共用記憶體資料段 shmid = %d\n"
+msgid "source %s exists"
+msgstr "來源裝置"
-#: sys-utils/ipcrm.c:84
+#: misc-utils/findmnt-verify.c:232
#, fuzzy, c-format
-msgid "removing message queue id `%d'\n"
-msgstr "訊息佇列識別號：%d\n"
+msgid "VFS options: %s"
+msgstr "%s：選項 "
-#: sys-utils/ipcrm.c:89
+#: misc-utils/findmnt-verify.c:236
#, fuzzy, c-format
-msgid "removing semaphore id `%d'\n"
-msgstr "號誌識別號：%d\n"
+msgid "FS options: %s"
+msgstr "%s：選項 "
-#: sys-utils/ipcrm.c:101 sys-utils/ipcrm.c:215
-msgid "permission denied for key"
-msgstr "權限被拒用於鍵值"
+#: misc-utils/findmnt-verify.c:240
+#, fuzzy, c-format
+msgid "userspace options: %s"
+msgstr "資源選項：\n"
-#: sys-utils/ipcrm.c:101
-msgid "permission denied for id"
-msgstr "權限被拒用於識別號"
+#: misc-utils/findmnt-verify.c:254
+#, fuzzy, c-format
+msgid "unsupported swaparea discard policy: %s"
+msgstr "不受支援的引數：%s"
-#: sys-utils/ipcrm.c:104 sys-utils/ipcrm.c:221
-msgid "invalid key"
-msgstr "無效的鍵值"
+#: misc-utils/findmnt-verify.c:262
+#, fuzzy
+msgid "failed to parse swaparea priority option"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/ipcrm.c:104
-msgid "invalid id"
-msgstr "無效的識別號"
+#: misc-utils/findmnt-verify.c:398
+#, c-format
+msgid "do not check %s FS type (pseudo/net)"
+msgstr ""
-#: sys-utils/ipcrm.c:107 sys-utils/ipcrm.c:218
-msgid "already removed key"
-msgstr "已經移除的鍵值"
+#: misc-utils/findmnt-verify.c:408
+msgid "\"none\" FS type is recommended for bind or move oprations only"
+msgstr ""
-#: sys-utils/ipcrm.c:107
-msgid "already removed id"
-msgstr "已經移除的識別號"
+#: misc-utils/findmnt-verify.c:418
+#, fuzzy, c-format
+msgid "%s seems unsupported by the current kernel"
+msgstr "唯讀光碟機選取速度命令不支援由這個內核"
-#: sys-utils/ipcrm.c:110 sys-utils/ipcrm.c:224
+#: misc-utils/findmnt-verify.c:424 misc-utils/findmnt-verify.c:425
#, fuzzy
-msgid "key failed"
-msgstr "搜尋失敗"
+msgid "cannot detect on-disk filesystem type"
+msgstr "不明檔案系統型態『%s』"
-#: sys-utils/ipcrm.c:110
-#, fuzzy
-msgid "id failed"
-msgstr "setuid() 失敗"
+#: misc-utils/findmnt-verify.c:433
+#, c-format
+msgid "%s does not match with on-disk %s"
+msgstr ""
-#: sys-utils/ipcrm.c:127
+#: misc-utils/findmnt-verify.c:436
#, fuzzy, c-format
-msgid "invalid id: %s"
-msgstr "無效的識別號：%s\n"
+msgid "on-disk %s seems unsupported by the current kernel"
+msgstr "唯讀光碟機選取速度命令不支援由這個內核"
-#: sys-utils/ipcrm.c:153 term-utils/agetty.c:694 term-utils/agetty.c:703
-#, fuzzy
-msgid "not enough arguments"
-msgstr "引數不足"
+#: misc-utils/findmnt-verify.c:438
+#, fuzzy, c-format
+msgid "FS type is %s"
+msgstr "類型：%s\n"
-#: sys-utils/ipcrm.c:160
+#: misc-utils/findmnt-verify.c:450
#, c-format
-msgid "resource(s) deleted\n"
-msgstr "資源已刪除\n"
+msgid "recommended root FS passno is 1 (current is %d)"
+msgstr ""
-#: sys-utils/ipcrm.c:193
+#: misc-utils/findmnt-verify.c:519
#, fuzzy, c-format
-msgid "illegal key (%s)"
-msgstr "%s：不合法的鍵值 (%s)\n"
+msgid "%d parse error"
+msgid_plural "%d parse errors"
+msgstr[0] "剖析錯誤\n"
+
+#: misc-utils/findmnt-verify.c:520
+#, fuzzy, c-format
+msgid ", %d error"
+msgid_plural ", %d errors"
+msgstr[0] "，錯誤"
+
+#: misc-utils/findmnt-verify.c:521
+#, c-format
+msgid ", %d warning"
+msgid_plural ", %d warnings"
+msgstr[0] ""
+
+#: misc-utils/findmnt-verify.c:524
+#, c-format
+msgid "Success, no errors or warnings detected\n"
+msgstr ""
+
+#: misc-utils/getopt.c:302
+msgid "empty long option after -l or --long argument"
+msgstr "-l 或 --long 引數之後出現空的長選項"
-#: sys-utils/ipcrm.c:251
+#: misc-utils/getopt.c:323
+msgid "unknown shell after -s or --shell argument"
+msgstr "-s 或 --shell 引數之後出現不明的命令殼名稱"
+
+#: misc-utils/getopt.c:330
+#, fuzzy, c-format
+msgid ""
+" %1$s <optstring> <parameters>\n"
+" %1$s [options] [--] <optstring> <parameters>\n"
+" %1$s [options] -o|--options <optstring> [options] [--] <parameters>\n"
+msgstr ""
+" %1$s optstring 參數\n"
+" %1$s [選項] [--] optstring 參數\n"
+" %1$s [選項] -o|--options optstring [選項] [--] 參數\n"
+
+#: misc-utils/getopt.c:336
#, fuzzy
-msgid "kernel not configured for shared memory"
-msgstr "內核未組配支援共用記憶體\n"
+msgid "Parse command options.\n"
+msgstr "所有掛載選項"
-#: sys-utils/ipcrm.c:264
+#: misc-utils/getopt.c:339
#, fuzzy
-msgid "kernel not configured for semaphores"
-msgstr "內核未組配用於號誌\n"
+msgid " -a, --alternative allow long options starting with single -\n"
+msgstr " -a, --alternative 允許長選項開始與單一 -\n"
-#: sys-utils/ipcrm.c:278
+#: misc-utils/getopt.c:340
#, fuzzy
-msgid "kernel not configured for message queues"
-msgstr "內核未組配用於訊息佇列\n"
+msgid " -l, --longoptions <longopts> the long options to be recognized\n"
+msgstr " -l, --longoptions <longopts> 長選項為辨識的\n"
-#: sys-utils/ipcrm.c:338 sys-utils/ipcrm.c:351 sys-utils/ipcrm.c:364
+#: misc-utils/getopt.c:341
#, fuzzy
-msgid "failed to parse argument"
-msgstr "剖析 pid 時失敗"
+msgid " -n, --name <progname> the name under which errors are reported\n"
+msgstr " -n, --name <progname> 名稱之下該項錯誤被報告\n"
-#: sys-utils/ipcrm.c:379 sys-utils/ipcrm.c:403
-#, fuzzy, c-format
-msgid "unknown argument: %s"
-msgstr "%s：不明的引數：%s\n"
+#: misc-utils/getopt.c:342
+#, fuzzy
+msgid " -o, --options <optstring> the short options to be recognized\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/ipcs.c:121
+#: misc-utils/getopt.c:343
#, fuzzy
-msgid " -i, --id <id> print details on resource identified by id\n"
-msgstr ""
-" -h 顯示這個說明\n"
-" -i id 印出由 id 標識出的資源細節\n"
-"\n"
+msgid " -q, --quiet disable error reporting by getopt(3)\n"
+msgstr " -q, --quiet 停用錯誤報告由 getopt (3)\n"
-#: sys-utils/ipcs.c:124 sys-utils/ipcs.c:130
-msgid "\n"
-msgstr ""
+#: misc-utils/getopt.c:344
+#, fuzzy
+msgid " -Q, --quiet-output no normal output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/ipcs.c:125
+#: misc-utils/getopt.c:345
#, fuzzy
-msgid "Resource options:\n"
-msgstr "危險選項："
+msgid " -s, --shell <shell> set quoting conventions to those of <shell>\n"
+msgstr " -s, --shell <shell> 設定命令殼引言慣例\n"
-#: sys-utils/ipcs.c:126
-msgid " -m, --shmems shared memory segments\n"
-msgstr ""
+#: misc-utils/getopt.c:346
+#, fuzzy
+msgid " -T, --test test for getopt(1) version\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: sys-utils/ipcs.c:127
-msgid " -q, --queues message queues\n"
+#: misc-utils/getopt.c:347
+#, fuzzy
+msgid " -u, --unquoted do not quote the output\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: misc-utils/getopt.c:396 misc-utils/getopt.c:456
+msgid "missing optstring argument"
+msgstr "缺少選項字串引數"
+
+#: misc-utils/getopt.c:451
+msgid "internal error, contact the author."
+msgstr "內部錯誤，請與作者連絡。"
+
+#: misc-utils/hardlink.c:127
+#, fuzzy, c-format
+msgid "Directories: %9lld\n"
+msgstr "已交換記憶體頁 %ld\n"
+
+#: misc-utils/hardlink.c:128
+#, c-format
+msgid "Objects: %9lld\n"
msgstr ""
-#: sys-utils/ipcs.c:128
-msgid " -s, --semaphores semaphores\n"
+#: misc-utils/hardlink.c:129
+#, c-format
+msgid "Regular files: %9lld\n"
msgstr ""
-#: sys-utils/ipcs.c:129
-msgid " -a, --all all (default)\n"
+#: misc-utils/hardlink.c:130
+#, fuzzy, c-format
+msgid "Comparisons: %9lld\n"
msgstr ""
+"\n"
+"%d 分割區：\n"
-#: sys-utils/ipcs.c:131
-msgid "Output format:\n"
+#: misc-utils/hardlink.c:132
+msgid "Would link: "
msgstr ""
-#: sys-utils/ipcs.c:132
-msgid " -t, --time show attach, detach and change times\n"
+#: misc-utils/hardlink.c:133
+msgid "Linked: "
msgstr ""
-#: sys-utils/ipcs.c:133
-msgid " -p, --pid show creator and last operations PIDs\n"
+#: misc-utils/hardlink.c:135
+msgid "Would save: "
msgstr ""
-#: sys-utils/ipcs.c:134
-msgid " -c, --creator show creator and owner\n"
+#: misc-utils/hardlink.c:136
+msgid "Saved: "
msgstr ""
-#: sys-utils/ipcs.c:135
-msgid " -l, --limits show resource limits\n"
+#: misc-utils/hardlink.c:142
+#, fuzzy, c-format
+msgid " %s [options] directory...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: misc-utils/hardlink.c:145
+msgid "Consolidate duplicate files using hardlinks."
msgstr ""
-#: sys-utils/ipcs.c:136
-msgid " -u, --summary show status summary\n"
+#: misc-utils/hardlink.c:148
+msgid " -c, --content compare only contents, ignore permission, etc."
msgstr ""
-#: sys-utils/ipcs.c:276
-#, c-format
-msgid "kernel not configured for shared memory\n"
-msgstr "內核未組配支援共用記憶體\n"
+#: misc-utils/hardlink.c:149
+#, fuzzy
+msgid " -n, --dry-run don't actually link anything"
+msgstr " -f 不分割長列\n"
-#: sys-utils/ipcs.c:282
-#, c-format
-msgid "------ Shared Memory Limits --------\n"
-msgstr "------ 共用記憶體限度 --------\n"
+#: misc-utils/hardlink.c:150
+#, fuzzy
+msgid " -v, --verbose print summary after hardlinking"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/ipcs.c:289
-#, c-format
-msgid "max number of segments = %lu\n"
-msgstr "最大資料段數量 = %lu\n"
+#: misc-utils/hardlink.c:151
+#, fuzzy
+msgid " -vv print every hardlinked file and summary"
+msgstr " -r, --reset 重置通訊埠\n"
-#: sys-utils/ipcs.c:291
-#, c-format
-msgid "max seg size (kbytes) = %lu\n"
-msgstr "最大資料段大小 (千位元組) = %lu\n"
+#: misc-utils/hardlink.c:152
+#, fuzzy
+msgid " -f, --force force hardlinking across filesystems"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/ipcs.c:293
-#, c-format
-msgid "max total shared memory (kbytes) = %llu\n"
-msgstr "最大共用記憶體 (千位元組) = %llu\n"
+#: misc-utils/hardlink.c:153
+msgid " -x, --exclude <regex> exclude files matching pattern"
+msgstr ""
-#: sys-utils/ipcs.c:295
-#, c-format
-msgid "min seg size (bytes) = %lu\n"
-msgstr "最小資料段大小 (位元組) = %lu\n"
+#: misc-utils/hardlink.c:167
+#, fuzzy
+msgid "integer overflow"
+msgstr "內部錯誤"
-#: sys-utils/ipcs.c:300
+#: misc-utils/hardlink.c:196
#, c-format
-msgid "------ Shared Memory Status --------\n"
-msgstr "------ 共用記憶體狀態 --------\n"
+msgid "%s is on different filesystem than the rest (use -f option to override)."
+msgstr ""
-#: sys-utils/ipcs.c:312
+#: misc-utils/hardlink.c:306 sys-utils/unshare.c:212
+#, fuzzy, c-format
+msgid "cannot stat %s"
+msgstr "無法識別「%s」狀態"
+
+#: misc-utils/hardlink.c:312
+#, fuzzy, c-format
+msgid "file %s changed underneath us"
+msgstr "變更目錄到 %s 時失敗"
+
+#: misc-utils/hardlink.c:332
#, c-format
-msgid ""
-"segments allocated %d\n"
-"pages allocated %ld\n"
-"pages resident %ld\n"
-"pages swapped %ld\n"
-"Swap performance: %ld attempts\t %ld successes\n"
+msgid "failed to hardlink %s to %s (create temporary link as %s failed)"
msgstr ""
-#: sys-utils/ipcs.c:325
+#: misc-utils/hardlink.c:339
#, c-format
-msgid "------ Shared Memory Segment Creators/Owners --------\n"
-msgstr "------ 共用記憶體資料段建立者/擁有者 --------\n"
-
-#: sys-utils/ipcs.c:327 sys-utils/ipcs.c:333 sys-utils/ipcs.c:340
-#: sys-utils/ipcs.c:346
-msgid "shmid"
-msgstr "shmid"
-
-#: sys-utils/ipcs.c:327 sys-utils/ipcs.c:346 sys-utils/ipcs.c:446
-#: sys-utils/ipcs.c:461 sys-utils/ipcs.c:543 sys-utils/ipcs.c:561
-msgid "perms"
-msgstr "perms"
+msgid "failed to hardlink %s to %s (rename temporary link to %s failed)"
+msgstr ""
-#: sys-utils/ipcs.c:327 sys-utils/ipcs.c:446 sys-utils/ipcs.c:543
-msgid "cuid"
-msgstr "cuid"
+#: misc-utils/hardlink.c:343
+#, fuzzy, c-format
+msgid "failed to remove temporary link %s"
+msgstr "移除分割時失敗"
-#: sys-utils/ipcs.c:327 sys-utils/ipcs.c:446 sys-utils/ipcs.c:543
-msgid "cgid"
-msgstr "cgid"
+#: misc-utils/hardlink.c:354
+#, fuzzy, c-format
+msgid " %s %s to %s\n"
+msgstr "%s：掛載的於 %s"
-#: sys-utils/ipcs.c:327 sys-utils/ipcs.c:446 sys-utils/ipcs.c:543
-msgid "uid"
-msgstr "uid"
+#: misc-utils/hardlink.c:355 misc-utils/hardlink.c:361
+msgid "Would link"
+msgstr ""
-#: sys-utils/ipcs.c:327 sys-utils/ipcs.c:446 sys-utils/ipcs.c:543
-msgid "gid"
-msgstr "gid"
+#: misc-utils/hardlink.c:355 misc-utils/hardlink.c:361
+msgid "Linked"
+msgstr ""
-#: sys-utils/ipcs.c:331
+#: misc-utils/hardlink.c:360
#, c-format
-msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
-msgstr "------ 共用記憶體附加/卸離/變更 次數 --------\n"
+msgid " %s %s to %s, %s %jd\n"
+msgstr ""
-#: sys-utils/ipcs.c:333 sys-utils/ipcs.c:340 sys-utils/ipcs.c:346
-#: sys-utils/ipcs.c:452 sys-utils/ipcs.c:461 sys-utils/ipcs.c:549
-#: sys-utils/ipcs.c:555 sys-utils/ipcs.c:561
-msgid "owner"
-msgstr "擁有者"
+#: misc-utils/hardlink.c:363
+msgid "would save"
+msgstr ""
-#: sys-utils/ipcs.c:333
-msgid "attached"
-msgstr "已附加"
-
-#: sys-utils/ipcs.c:333
-msgid "detached"
-msgstr "已卸離"
+#: misc-utils/hardlink.c:363 text-utils/pg.c:1263
+msgid "saved"
+msgstr "已儲存"
-#: sys-utils/ipcs.c:334
-msgid "changed"
-msgstr "已變更"
+#: misc-utils/hardlink.c:437
+msgid "option --exclude not supported (built without pcre2)"
+msgstr ""
-#: sys-utils/ipcs.c:338
-#, c-format
-msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
-msgstr "------ 共用記憶體建立者/最後操作 PIDs --------\n"
+#: misc-utils/hardlink.c:450
+#, fuzzy
+msgid "no directory specified"
+msgstr "沒有迴圈裝置指定的"
-#: sys-utils/ipcs.c:340
-msgid "cpid"
-msgstr "cpid"
+#: misc-utils/hardlink.c:464
+#, fuzzy, c-format
+msgid "pattern error at offset %d: %s"
+msgstr "剖析錯誤發生於列號："
-#: sys-utils/ipcs.c:340
-msgid "lpid"
-msgstr "lpid"
+#: misc-utils/hardlink.c:509
+#, fuzzy, c-format
+msgid "Skipping %s%s\n"
+msgstr ""
+"\n"
+"...跳過 "
-#: sys-utils/ipcs.c:344
-#, c-format
-msgid "------ Shared Memory Segments --------\n"
-msgstr "------ 共用記憶體資料段 --------\n"
+#: misc-utils/kill.c:168
+#, fuzzy, c-format
+msgid "unknown signal %s; valid signals:"
+msgstr "%s：不明信號 %s; 有效信號：\n"
-#: sys-utils/ipcs.c:346 sys-utils/ipcs.c:461 sys-utils/ipcs.c:561
-msgid "key"
-msgstr "鍵值"
+#: misc-utils/kill.c:193
+#, fuzzy, c-format
+msgid " %s [options] <pid>|<name>...\n"
+msgstr " %s [選項] <device> [...]\n"
-#: sys-utils/ipcs.c:346 sys-utils/prlimit.c:69 sys-utils/prlimit.c:72
-#: sys-utils/prlimit.c:75 sys-utils/prlimit.c:76 sys-utils/prlimit.c:84
-msgid "bytes"
-msgstr "位元組"
+#: misc-utils/kill.c:196
+msgid "Forcibly terminate a process.\n"
+msgstr ""
-#: sys-utils/ipcs.c:347
-msgid "nattch"
-msgstr "使用數"
+#: misc-utils/kill.c:199
+msgid ""
+" -a, --all do not restrict the name-to-pid conversion to processes\n"
+" with the same uid as the present process\n"
+msgstr ""
-#: sys-utils/ipcs.c:347
-msgid "status"
-msgstr "狀態"
+#: misc-utils/kill.c:201
+msgid " -s, --signal <signal> send this <signal> instead of SIGTERM\n"
+msgstr ""
-#: sys-utils/ipcs.c:368 sys-utils/ipcs.c:370 sys-utils/ipcs.c:372
-#: sys-utils/ipcs.c:482 sys-utils/ipcs.c:484 sys-utils/ipcs.c:582
-#: sys-utils/ipcs.c:584 sys-utils/ipcs.c:586 sys-utils/ipcs.c:636
-#: sys-utils/ipcs.c:638 sys-utils/ipcs.c:665 sys-utils/ipcs.c:667
-#: sys-utils/ipcs.c:669 sys-utils/ipcs.c:692
-msgid "Not set"
-msgstr "未設定"
+#: misc-utils/kill.c:203
+#, fuzzy
+msgid " -q, --queue <value> use sigqueue(2), not kill(2), and pass <value> as data\n"
+msgstr " -q, --queue-id <id> 移除訊息佇列由識別號\n"
-#: sys-utils/ipcs.c:400
-msgid "dest"
-msgstr "目標"
+#: misc-utils/kill.c:206
+msgid ""
+" --timeout <milliseconds> <follow-up signal>\n"
+" wait up to timeout and send follow-up signal\n"
+msgstr ""
-#: sys-utils/ipcs.c:401
-msgid "locked"
-msgstr "已鎖定"
+#: misc-utils/kill.c:209
+#, fuzzy
+msgid " -p, --pid print pids without signaling them\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/ipcs.c:420
-#, c-format
-msgid "kernel not configured for semaphores\n"
-msgstr "內核未組配用於號誌\n"
+#: misc-utils/kill.c:210
+msgid " -l, --list[=<signal>] list signal names, or convert a signal number to a name\n"
+msgstr ""
-#: sys-utils/ipcs.c:426
-#, c-format
-msgid "------ Semaphore Limits --------\n"
-msgstr "------ 號誌限度 --------\n"
+#: misc-utils/kill.c:211
+msgid " -L, --table list signal names and numbers\n"
+msgstr ""
-#: sys-utils/ipcs.c:430
-#, c-format
-msgid "max number of arrays = %d\n"
-msgstr "最大陣列數量 = %d\n"
+#: misc-utils/kill.c:212
+#, fuzzy
+msgid " --verbose print pids that will be signaled\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/ipcs.c:431
-#, c-format
-msgid "max semaphores per array = %d\n"
-msgstr "各陣列最大號誌 = %d\n"
+#: misc-utils/kill.c:232 term-utils/agetty.c:687
+#, fuzzy, c-format
+msgid "%s from %s"
+msgstr "%s 來自 %s\n"
-#: sys-utils/ipcs.c:432
-#, c-format
-msgid "max semaphores system wide = %d\n"
-msgstr "系統整體最大號誌 = %d\n"
+#: misc-utils/kill.c:236
+msgid " (with: "
+msgstr ""
-#: sys-utils/ipcs.c:433
-#, c-format
-msgid "max ops per semop call = %d\n"
-msgstr "各 semop 呼叫最大 ops = %d\n"
+#: misc-utils/kill.c:285 misc-utils/kill.c:294 sys-utils/setpriv.c:451
+#: sys-utils/unshare.c:422
+#, fuzzy, c-format
+msgid "unknown signal: %s"
+msgstr "%s：不明信號 %s\n"
-#: sys-utils/ipcs.c:434
-#, c-format
-msgid "semaphore max value = %d\n"
-msgstr "號誌最大值 = %d\n"
+#: misc-utils/kill.c:305 misc-utils/kill.c:308 misc-utils/kill.c:317
+#: misc-utils/kill.c:329 misc-utils/kill.c:372 sys-utils/mountpoint.c:193
+#, fuzzy, c-format
+msgid "%s and %s are mutually exclusive"
+msgstr "彼此互斥。"
-#: sys-utils/ipcs.c:438
-#, c-format
-msgid "------ Semaphore Status --------\n"
-msgstr "------ 號誌狀態 --------\n"
+#: misc-utils/kill.c:332 misc-utils/kill.c:347 sys-utils/eject.c:208
+#: sys-utils/eject.c:230 sys-utils/losetup.c:726 sys-utils/tunelp.c:164
+#: sys-utils/tunelp.c:171 sys-utils/tunelp.c:178 sys-utils/tunelp.c:185
+#: sys-utils/tunelp.c:192 sys-utils/tunelp.c:198 sys-utils/tunelp.c:202
+#: sys-utils/tunelp.c:209 term-utils/setterm.c:211 term-utils/setterm.c:214
+#: term-utils/setterm.c:233 term-utils/setterm.c:235 term-utils/setterm.c:273
+#: term-utils/setterm.c:275 term-utils/setterm.c:292 term-utils/setterm.c:299
+#: term-utils/setterm.c:301 term-utils/setterm.c:313 term-utils/setterm.c:315
+#: term-utils/setterm.c:324 term-utils/setterm.c:332 term-utils/setterm.c:347
+#: term-utils/setterm.c:349 term-utils/setterm.c:361 term-utils/setterm.c:363
+#: term-utils/setterm.c:374 term-utils/setterm.c:562 term-utils/setterm.c:567
+#: term-utils/setterm.c:572 term-utils/setterm.c:577 term-utils/setterm.c:601
+#: term-utils/setterm.c:606 term-utils/setterm.c:611 term-utils/setterm.c:616
+#: term-utils/setterm.c:621 term-utils/setterm.c:626 term-utils/setterm.c:635
+#: term-utils/setterm.c:670
+#, fuzzy
+msgid "argument error"
+msgstr "引數錯誤。"
-#: sys-utils/ipcs.c:439
-#, c-format
-msgid "used arrays = %d\n"
-msgstr "已用陣列 = %d\n"
+#: misc-utils/kill.c:369
+#, fuzzy, c-format
+msgid "invalid signal name or number: %s"
+msgstr "無效的 sigval 引數"
-#: sys-utils/ipcs.c:440
-#, c-format
-msgid "allocated semaphores = %d\n"
-msgstr "已配置號誌 = %d\n"
+#: misc-utils/kill.c:396
+#, fuzzy, c-format
+msgid "pidfd_open() failed: %d"
+msgstr "開啟失敗：%s"
-#: sys-utils/ipcs.c:444
-#, c-format
-msgid "------ Semaphore Arrays Creators/Owners --------\n"
-msgstr "------ 號誌陣列建立者/擁有者 --------\n"
+#: misc-utils/kill.c:401 misc-utils/kill.c:415
+#, fuzzy
+msgid "pidfd_send_signal() failed"
+msgstr "settimeofday() 失敗"
-#: sys-utils/ipcs.c:446 sys-utils/ipcs.c:452 sys-utils/ipcs.c:461
-msgid "semid"
-msgstr "semid"
+#: misc-utils/kill.c:412
+#, fuzzy, c-format
+msgid "timeout, sending signal %d to pid %d\n"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/ipcs.c:450
-#, c-format
-msgid "------ Semaphore Operation/Change Times --------\n"
-msgstr "------ 號誌作業/變更 次數 --------\n"
+#: misc-utils/kill.c:427
+#, fuzzy, c-format
+msgid "sending signal %d to pid %d\n"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/ipcs.c:452
-msgid "last-op"
-msgstr "最後操作者"
+#: misc-utils/kill.c:445
+#, fuzzy, c-format
+msgid "sending signal to %s failed"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/ipcs.c:452
-msgid "last-changed"
-msgstr "最後變更者"
+#: misc-utils/kill.c:494
+#, fuzzy, c-format
+msgid "cannot find process \"%s\""
+msgstr "%s：找不到行程「%s」\n"
-#: sys-utils/ipcs.c:459
-#, c-format
-msgid "------ Semaphore Arrays --------\n"
-msgstr "------ 號誌陣列 --------\n"
+#: misc-utils/logger.c:228
+#, fuzzy, c-format
+msgid "unknown facility name: %s"
+msgstr "不明機能名稱：%s。"
-#: sys-utils/ipcs.c:461
-msgid "nsems"
-msgstr "nsems"
+#: misc-utils/logger.c:234
+#, fuzzy, c-format
+msgid "unknown priority name: %s"
+msgstr "不明優先權名稱：%s。"
-#: sys-utils/ipcs.c:519
-#, c-format
-msgid "kernel not configured for message queues\n"
-msgstr "內核未組配用於訊息佇列\n"
+#: misc-utils/logger.c:246
+#, fuzzy, c-format
+msgid "openlog %s: pathname too long"
+msgstr "openlog %s：路徑名稱太長"
-#: sys-utils/ipcs.c:527
-#, c-format
-msgid "------ Messages Limits --------\n"
-msgstr "------ 訊息限度 --------\n"
+#: misc-utils/logger.c:273
+#, fuzzy, c-format
+msgid "socket %s"
+msgstr "通訊端 %s"
-#: sys-utils/ipcs.c:528
-#, c-format
-msgid "max queues system wide = %d\n"
-msgstr "系統整體最大佇列 = %d\n"
+#: misc-utils/logger.c:310
+#, fuzzy, c-format
+msgid "failed to resolve name %s port %s: %s"
+msgstr "掛載移動 %s 到 %s 時失敗"
-#: sys-utils/ipcs.c:529
-#, c-format
-msgid "max size of message (bytes) = %d\n"
-msgstr "訊息最大尺寸 (位元組)=%d\n"
+#: misc-utils/logger.c:327
+#, fuzzy, c-format
+msgid "failed to connect to %s port %s"
+msgstr "掛載移動 %s 到 %s 時失敗"
-#: sys-utils/ipcs.c:530
+#: misc-utils/logger.c:375
#, c-format
-msgid "default max size of queue (bytes) = %d\n"
-msgstr "預設佇列最大尺寸 (位元組)=%d\n"
+msgid "maximum input lines (%d) exceeded"
+msgstr ""
-#: sys-utils/ipcs.c:534
-#, c-format
-msgid "------ Messages Status --------\n"
-msgstr "------ 訊息狀態 --------\n"
+#: misc-utils/logger.c:528
+#, fuzzy
+msgid "send message failed"
+msgstr "建立訊息佇列時失敗"
-#: sys-utils/ipcs.c:535
+#: misc-utils/logger.c:598
#, c-format
-msgid "allocated queues = %d\n"
-msgstr "已配置佇列 = %d\n"
+msgid "structured data ID '%s' is not unique"
+msgstr ""
-#: sys-utils/ipcs.c:536
+#: misc-utils/logger.c:612
#, c-format
-msgid "used headers = %d\n"
-msgstr "已用標頭 = %d\n"
+msgid "--sd-id was not specified for --sd-param %s"
+msgstr ""
-#: sys-utils/ipcs.c:537
-#, c-format
-msgid "used space = %d bytes\n"
-msgstr "已用空間 = %d 位元組\n"
+#: misc-utils/logger.c:791
+#, fuzzy
+msgid "localtime() failed"
+msgstr "意見調查() 失敗"
-#: sys-utils/ipcs.c:541
-#, c-format
-msgid "------ Message Queues Creators/Owners --------\n"
-msgstr "------ 訊息佇列建立者/擁有者 --------\n"
+#: misc-utils/logger.c:801
+#, fuzzy, c-format
+msgid "hostname '%s' is too long"
+msgstr "欄位 %s 太長"
-#: sys-utils/ipcs.c:543 sys-utils/ipcs.c:549 sys-utils/ipcs.c:555
-#: sys-utils/ipcs.c:561
-msgid "msqid"
-msgstr "msqid"
+#: misc-utils/logger.c:807
+#, fuzzy, c-format
+msgid "tag '%s' is too long"
+msgstr "欄位 %s 太長"
-#: sys-utils/ipcs.c:547
-#, c-format
-msgid "------ Message Queues Send/Recv/Change Times --------\n"
-msgstr "------ 訊息佇列發送/接收/變更 次數 --------\n"
+#: misc-utils/logger.c:870
+#, fuzzy, c-format
+msgid "ignoring unknown option argument: %s"
+msgstr "不明引數：%s"
-#: sys-utils/ipcs.c:549
-msgid "send"
-msgstr "發送"
+#: misc-utils/logger.c:882
+#, fuzzy, c-format
+msgid "invalid argument: %s: using automatic errors"
+msgstr "無效的引數到 --auto /-a 選項"
-#: sys-utils/ipcs.c:549
-msgid "recv"
-msgstr "接收"
+#: misc-utils/logger.c:1053
+#, fuzzy, c-format
+msgid " %s [options] [<message>]\n"
+msgstr " %s [選項] [訊息]\n"
-#: sys-utils/ipcs.c:549
-msgid "change"
-msgstr "變更"
+#: misc-utils/logger.c:1056
+#, fuzzy
+msgid "Enter messages into the system log.\n"
+msgstr "無法設定系統時鐘。\n"
-#: sys-utils/ipcs.c:553
-#, c-format
-msgid "------ Message Queues PIDs --------\n"
-msgstr "------ 訊息佇列 PIDs --------\n"
+#: misc-utils/logger.c:1059
+#, fuzzy
+msgid " -i log the logger command's PID\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: sys-utils/ipcs.c:555
-msgid "lspid"
-msgstr "lspid"
+#: misc-utils/logger.c:1060
+#, fuzzy
+msgid " --id[=<id>] log the given <id>, or otherwise the PID\n"
+msgstr " -a, --all 所有 (預設)\n"
-#: sys-utils/ipcs.c:555
-msgid "lrpid"
-msgstr "lrpid"
+#: misc-utils/logger.c:1061
+#, fuzzy
+msgid " -f, --file <file> log the contents of this file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: sys-utils/ipcs.c:559
-#, c-format
-msgid "------ Message Queues --------\n"
-msgstr "------ 訊息佇列 --------\n"
+#: misc-utils/logger.c:1062
+#, fuzzy
+msgid " -e, --skip-empty do not log empty lines when processing files\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/ipcs.c:562
-msgid "used-bytes"
-msgstr "已用位元組"
+#: misc-utils/logger.c:1063
+#, fuzzy
+msgid " --no-act do everything except the write the log\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/ipcs.c:562
-msgid "messages"
-msgstr "訊息"
+#: misc-utils/logger.c:1064
+#, fuzzy
+msgid " -p, --priority <prio> mark given message with this priority\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/ipcs.c:625
-msgid "shmctl failed"
-msgstr "shmctl 失敗"
+#: misc-utils/logger.c:1065
+msgid " --octet-count use rfc6587 octet counting\n"
+msgstr ""
-#: sys-utils/ipcs.c:627
-#, c-format
-msgid ""
-"\n"
-"Shared memory Segment shmid=%d\n"
+#: misc-utils/logger.c:1066
+msgid " --prio-prefix look for a prefix on every line read from stdin\n"
msgstr ""
-"\n"
-"共用記憶體資料段 shmid = %d\n"
-#: sys-utils/ipcs.c:628
-#, fuzzy, c-format
-msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
-msgstr "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\n"
+#: misc-utils/logger.c:1067
+#, fuzzy
+msgid " -s, --stderr output message to standard error as well\n"
+msgstr " -s 列印訊息到標準輸出\n"
-#: sys-utils/ipcs.c:630
-#, c-format
-msgid "mode=%#o\taccess_perms=%#o\n"
-msgstr "mode=%#o\taccess_perms=%#o\n"
+#: misc-utils/logger.c:1068
+#, fuzzy
+msgid " -S, --size <size> maximum size for a single message\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/ipcs.c:632
-#, fuzzy, c-format
-msgid "bytes=%lu\tlpid=%d\tcpid=%d\tnattch=%ld\n"
-msgstr "bytes=%ld\tlpid=%d\tcpid=%d\tnattch=%ld\n"
+#: misc-utils/logger.c:1069
+msgid " -t, --tag <tag> mark every line with this tag\n"
+msgstr ""
-#: sys-utils/ipcs.c:635
-#, c-format
-msgid "att_time=%-26.24s\n"
-msgstr "att_time=%-26.24s\n"
+#: misc-utils/logger.c:1070
+msgid " -n, --server <name> write to this remote syslog server\n"
+msgstr ""
-#: sys-utils/ipcs.c:637
-#, c-format
-msgid "det_time=%-26.24s\n"
-msgstr "det_time=%-26.24s\n"
+#: misc-utils/logger.c:1071
+#, fuzzy
+msgid " -P, --port <port> use this port for UDP or TCP connection\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: sys-utils/ipcs.c:639 sys-utils/ipcs.c:668
-#, c-format
-msgid "change_time=%-26.24s\n"
-msgstr "change_time=%-26.24s\n"
+#: misc-utils/logger.c:1072
+#, fuzzy
+msgid " -T, --tcp use TCP only\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: sys-utils/ipcs.c:651
-msgid "msgctl failed"
-msgstr "msgctl 失敗"
+#: misc-utils/logger.c:1073
+#, fuzzy
+msgid " -d, --udp use UDP only\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: sys-utils/ipcs.c:653
-#, c-format
+#: misc-utils/logger.c:1074
+#, fuzzy
+msgid " --rfc3164 use the obsolete BSD syslog protocol\n"
+msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
+
+#: misc-utils/logger.c:1075
msgid ""
-"\n"
-"Message Queue msqid=%d\n"
+" --rfc5424[=<snip>] use the syslog protocol (the default for remote);\n"
+" <snip> can be notime, or notq, and/or nohost\n"
msgstr ""
-"\n"
-"訊息佇列 msqid=%d\n"
-#: sys-utils/ipcs.c:654
-#, fuzzy, c-format
-msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
-msgstr "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\tmode=%#o\n"
-
-#: sys-utils/ipcs.c:656
-#, c-format
-msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
-msgstr "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
+#: misc-utils/logger.c:1077
+#, fuzzy
+msgid " --sd-id <id> rfc5424 structured data ID\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/ipcs.c:664
-#, c-format
-msgid "send_time=%-26.24s\n"
-msgstr "send_time =%-26.24s\n"
+#: misc-utils/logger.c:1078
+msgid " --sd-param <data> rfc5424 structured data name=value\n"
+msgstr ""
-#: sys-utils/ipcs.c:666
-#, c-format
-msgid "rcv_time=%-26.24s\n"
-msgstr "rcv_time=%-26.24s\n"
+#: misc-utils/logger.c:1079
+#, fuzzy
+msgid " --msgid <msgid> set rfc5424 message id field\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/ipcs.c:683 sys-utils/ipcs.c:705
-msgid "semctl failed"
-msgstr "semctl 失敗"
+#: misc-utils/logger.c:1080
+msgid " -u, --socket <socket> write to this Unix socket\n"
+msgstr ""
-#: sys-utils/ipcs.c:685
-#, c-format
+#: misc-utils/logger.c:1081
msgid ""
-"\n"
-"Semaphore Array semid=%d\n"
+" --socket-errors[=<on|off|auto>]\n"
+" print connection errors when using Unix sockets\n"
+msgstr ""
+
+#: misc-utils/logger.c:1084
+msgid " --journald[=<file>] write journald entry\n"
msgstr ""
-"\n"
-"號誌陣列 semid=%d\n"
-#: sys-utils/ipcs.c:686
+#: misc-utils/logger.c:1170
#, fuzzy, c-format
-msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
-msgstr "uid=%d\t gid=%d\t cuid=%d\t cgid=%d\n"
-
-#: sys-utils/ipcs.c:688
-#, c-format
-msgid "mode=%#o, access_perms=%#o\n"
-msgstr "模式=%#o, access_perms=%#o\n"
-
-#: sys-utils/ipcs.c:690
-#, c-format
-msgid "nsems = %ld\n"
-msgstr "nsems = %ld\n"
-
-#: sys-utils/ipcs.c:691
-#, c-format
-msgid "otime = %-26.24s\n"
-msgstr "otime = %-26.24s\n"
-
-#: sys-utils/ipcs.c:693
-#, c-format
-msgid "ctime = %-26.24s\n"
-msgstr "ctime = %-26.24s\n"
-
-#: sys-utils/ipcs.c:696
-msgid "semnum"
-msgstr "semnum"
-
-#: sys-utils/ipcs.c:696
-msgid "value"
-msgstr "值"
-
-#: sys-utils/ipcs.c:696
-msgid "ncount"
-msgstr "ncount"
-
-#: sys-utils/ipcs.c:696
-msgid "zcount"
-msgstr "zcount"
-
-#: sys-utils/ipcs.c:696
-msgid "pid"
-msgstr "pid"
+msgid "file %s"
+msgstr "檔案 %s"
-#: sys-utils/ldattach.c:143
+#: misc-utils/logger.c:1185
#, fuzzy
-msgid "invalid iflag"
-msgstr "無效的 iflag：%s"
+msgid "failed to parse id"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/ldattach.c:159
-#, fuzzy, c-format
-msgid " %s [options] <ldisc> <device>\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: misc-utils/logger.c:1203
+#, fuzzy
+msgid "failed to parse message size"
+msgstr "剖析大小時失敗"
-#: sys-utils/ldattach.c:162
-msgid " -d, --debug print verbose messages to stderr\n"
+#: misc-utils/logger.c:1233
+msgid "--msgid cannot contain space"
msgstr ""
-#: sys-utils/ldattach.c:163
-msgid " -s, --speed <value> set serial line speed\n"
-msgstr ""
+#: misc-utils/logger.c:1255
+#, fuzzy, c-format
+msgid "invalid structured data ID: '%s'"
+msgstr "無效的引數：%s"
-#: sys-utils/ldattach.c:164
-msgid " -7, --sevenbits set character size to 7 bits\n"
-msgstr ""
+#: misc-utils/logger.c:1260
+#, fuzzy, c-format
+msgid "invalid structured data parameter: '%s'"
+msgstr "無效的逾時引數：%s"
-#: sys-utils/ldattach.c:165
-msgid " -8, --eightbits set character size to 8 bits\n"
-msgstr ""
+#: misc-utils/logger.c:1275
+#, fuzzy
+msgid "--file <file> and <message> are mutually exclusive, message is ignored"
+msgstr "--offset 和 --all 彼此互斥"
-#: sys-utils/ldattach.c:166
-msgid " -n, --noparity set parity to none\n"
+#: misc-utils/logger.c:1282
+msgid "journald entry could not be written"
msgstr ""
-#: sys-utils/ldattach.c:167
-msgid " -e, --evenparity set parity to even\n"
-msgstr ""
+#: misc-utils/look.c:359
+#, fuzzy, c-format
+msgid " %s [options] <string> [<file>...]\n"
+msgstr " %s [選項] 字串 [檔案]\n"
-#: sys-utils/ldattach.c:168
-msgid " -o, --oddparity set parity to odd\n"
+#: misc-utils/look.c:362
+msgid "Display lines beginning with a specified string.\n"
msgstr ""
-#: sys-utils/ldattach.c:169
-msgid " -1, --onestopbit set stop bits to one\n"
-msgstr ""
+#: misc-utils/look.c:365
+#, fuzzy
+msgid " -a, --alternative use the alternative dictionary\n"
+msgstr " -a, --alternative 允許長選項開始與單一 -\n"
-#: sys-utils/ldattach.c:170
-msgid " -2, --twostopbits set stop bits to two\n"
-msgstr ""
+#: misc-utils/look.c:366
+#, fuzzy
+msgid " -d, --alphanum compare only blanks and alphanumeric characters\n"
+msgstr " -c, --chars <num> 輸出字元數的之前暫停\n"
-#: sys-utils/ldattach.c:171
-msgid " -i, --iflag [-]<iflag> set input mode flag\n"
-msgstr ""
+#: misc-utils/look.c:367
+#, fuzzy
+msgid " -f, --ignore-case ignore case differences when comparing\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/ldattach.c:176
-msgid ""
-"\n"
-"Known <ldisc> names:\n"
+#: misc-utils/look.c:368
+msgid " -t, --terminate <char> define the string-termination character\n"
msgstr ""
-"\n"
-"已知 <ldisc> 名稱：\n"
-#: sys-utils/ldattach.c:178
-msgid ""
-"\n"
-"Known <iflag> names:\n"
-msgstr ""
-"\n"
-"已知 <iflag> 名稱：\n"
+#: misc-utils/lsblk.c:152
+#, fuzzy
+msgid "device name"
+msgstr "裝置名稱"
-#: sys-utils/ldattach.c:264
+#: misc-utils/lsblk.c:153
#, fuzzy
-msgid "invalid speed"
-msgstr "無效的速度：%s"
+msgid "internal kernel device name"
+msgstr "內部內核裝置名稱"
-#: sys-utils/ldattach.c:275
-msgid "invalid option"
-msgstr "無效的選項"
+#: misc-utils/lsblk.c:154
+#, fuzzy
+msgid "internal parent kernel device name"
+msgstr "內部內核裝置名稱"
-#: sys-utils/ldattach.c:286
+#: misc-utils/lsblk.c:155
#, fuzzy
-msgid "invalid line discipline"
-msgstr "ç\84¡æ\95\88ç\9a\84ç·\9aè·¯è¦\8få¾\8bï¼\9a%s"
+msgid "path to the device node"
+msgstr "ç\8b\80æ\85\8bç\9a\84è£\9dç½®"
-#: sys-utils/ldattach.c:293
-#, c-format
-msgid "%s is not a serial line"
-msgstr "%s 並非序列線路"
+#: misc-utils/lsblk.c:163
+#, fuzzy
+msgid "filesystem version"
+msgstr "檔案系統大小"
-#: sys-utils/ldattach.c:300
-#, c-format
-msgid "cannot get terminal attributes for %s"
-msgstr "無法取得終端機屬性用於 %s"
+#: misc-utils/lsblk.c:165 sys-utils/zramctl.c:86
+#, fuzzy
+msgid "where the device is mounted"
+msgstr "位置裝置被掛載"
-#: sys-utils/ldattach.c:303
-#, c-format
-msgid "speed %d unsupported"
-msgstr "速度 %d 不受支援"
+#: misc-utils/lsblk.c:166 misc-utils/wipefs.c:109
+#, fuzzy
+msgid "filesystem LABEL"
+msgstr "檔案系統標貼"
-#: sys-utils/ldattach.c:352
-#, c-format
-msgid "cannot set terminal attributes for %s"
-msgstr "無法設定終端機屬性用於 %s"
+#: misc-utils/lsblk.c:169
+msgid "partition table identifier (usually UUID)"
+msgstr ""
-#: sys-utils/ldattach.c:359
-msgid "cannot set line discipline"
-msgstr "無法設定線路規律"
+#: misc-utils/lsblk.c:170
+#, fuzzy
+msgid "partition table type"
+msgstr "不明的分割表類型"
-#: sys-utils/ldattach.c:365
-msgid "cannot daemonize"
-msgstr "無法守護程式化"
+#: misc-utils/lsblk.c:172
+#, fuzzy
+msgid "partition type code or UUID"
+msgstr "分割 UUID"
-#: sys-utils/losetup.c:60 sys-utils/losetup.c:72
-#, fuzzy, c-format
-msgid ", offset %ju"
-msgstr "，偏移 %d"
+#: misc-utils/lsblk.c:173
+#, fuzzy
+msgid "partition type name"
+msgstr "分割名稱"
-#: sys-utils/losetup.c:63 sys-utils/losetup.c:75
-#, fuzzy, c-format
-msgid ", sizelimit %ju"
-msgstr "，大小限制 %<PRIu64>"
+#: misc-utils/lsblk.c:174
+#, fuzzy
+msgid "partition LABEL"
+msgstr "分割標貼"
-#: sys-utils/losetup.c:83
-#, fuzzy, c-format
-msgid ", encryption %s (type %u)"
-msgstr "，加密 %s (類型 %<PRIu32>)"
+#: misc-utils/lsblk.c:178
+#, fuzzy
+msgid "read-ahead of the device"
+msgstr "預先讀取的的裝置"
-#: sys-utils/losetup.c:118
-#, fuzzy, c-format
-msgid "%s: set capacity failed"
-msgstr "%s：stat 失敗"
+#: misc-utils/lsblk.c:179 sys-utils/losetup.c:79
+#, fuzzy
+msgid "read-only device"
+msgstr "唯讀裝置"
-#: sys-utils/losetup.c:128
-#, fuzzy, c-format
-msgid "%s: detach failed"
-msgstr "%s：stat 失敗"
+#: misc-utils/lsblk.c:180
+#, fuzzy
+msgid "removable device"
+msgstr "可移除的裝置"
-#: sys-utils/losetup.c:154
-#, c-format
-msgid ""
-" %1$s [options] [<loopdev>]\n"
-" %1$s [options] -f | <loopdev> <file>\n"
+#: misc-utils/lsblk.c:181
+msgid "removable or hotplug device (usb, pcmcia, ...)"
msgstr ""
-#: sys-utils/losetup.c:159
+#: misc-utils/lsblk.c:182
#, fuzzy
-msgid ""
-" -a, --all list all used devices\n"
-" -d, --detach <loopdev> [...] detach one or more devices\n"
-" -D, --detach-all detach all used devices\n"
-" -f, --find find first unused device\n"
-" -c, --set-capacity <loopdev> resize device\n"
-" -j, --associated <file> list all devices associated with <file>\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %1$s loop_device 提供資訊\n"
-" %1$s -a | --all 列出所有已用的\n"
-" %1$s -d | --detach <loopdev> [<loopdev>...] 刪除\n"
-" %1$s -f | --find 尋找未使用的\n"
-" %1$s -c | --set-capacity <loopdev> 調整大小\n"
-" %1$s -j | --associated <file>[-o <num>] 列出所有與 <file> 相關聯的\n"
-" %1$s [選項] {-f|--find|loopdev} <file> 設定\n"
+msgid "rotational device"
+msgstr "rotational 裝置"
-#: sys-utils/losetup.c:167
-#, fuzzy
-msgid ""
-" -e, --encryption <type> enable encryption with specified <name/num>\n"
-" -o, --offset <num> start at offset <num> into file\n"
-" --sizelimit <num> device limited to <num> bytes of the file\n"
-" -p, --pass-fd <num> read passphrase from file descriptor <num>\n"
-" -P, --partscan create partitioned loop device\n"
-" -r, --read-only setup read-only loop device\n"
-" --show print device name after setup (with -f)\n"
-" -v, --verbose verbose mode\n"
+#: misc-utils/lsblk.c:183
+msgid "adds randomness"
msgstr ""
-"\n"
-"選項：\n"
-" -e | --encryption <type> 以指定的 <name/num> 啟用資料加密\n"
-" -h | --help 這份說明\n"
-" -o | --offset <num> 開始於偏移值 <num> 後進入檔案\n"
-" --sizelimit <num> 限制環路為只有 <num> 位元組的檔案\n"
-" -p | --pass-fd <num> 從檔案描述編號 <num> 讀取密語\n"
-" -r | --read-only 設定唯讀環路裝置\n"
-" --show 印出裝置名稱 (配合 -f <file>)\n"
-" -v | --verbose 詳細模式\n"
-"\n"
-#: sys-utils/losetup.c:267
-#, fuzzy, c-format
-msgid "invalid offset '%s' specified"
-msgstr "%s：指定了無效的偏移值「%s」"
+#: misc-utils/lsblk.c:184
+#, fuzzy
+msgid "device identifier"
+msgstr "裝置識別碼"
-#: sys-utils/losetup.c:272 sys-utils/mount.c:751
-msgid "invalid passphrase file descriptor"
+#: misc-utils/lsblk.c:185
+msgid "disk serial number"
msgstr ""
-#: sys-utils/losetup.c:289
-#, fuzzy, c-format
-msgid "invalid size '%s' specified"
-msgstr "%s：指定了無效的大小限制「%s」"
-
-#: sys-utils/losetup.c:321
+#: misc-utils/lsblk.c:186
#, fuzzy
-msgid "no loop device specified"
-msgstr "mount：環路裝置被指定了兩次"
+msgid "size of the device"
+msgstr "大小的裝置"
-#: sys-utils/losetup.c:325
+#: misc-utils/lsblk.c:187
#, fuzzy
-msgid "no file specified"
-msgstr "未指定任何檔名"
-
-#: sys-utils/losetup.c:332
-#, fuzzy, c-format
-msgid "the options %s are allowed to loop device setup only"
-msgstr "選項彼此互斥"
+msgid "state of the device"
+msgstr "狀態的裝置"
-#: sys-utils/losetup.c:337
-msgid "the option --offset is not allowed in this context."
-msgstr ""
+#: misc-utils/lsblk.c:189
+#, fuzzy
+msgid "group name"
+msgstr "群組名稱"
-#: sys-utils/losetup.c:348 sys-utils/mount.c:112
+#: misc-utils/lsblk.c:190
#, fuzzy
-msgid "couldn't lock into memory"
-msgstr "無法鎖入記憶體，即將離開。\n"
+msgid "device node permissions"
+msgstr "裝置節點權限"
-#: sys-utils/losetup.c:357
+#: misc-utils/lsblk.c:191
#, fuzzy
-msgid "not found unused device"
-msgstr "找不到做為 %s 的裝置"
+msgid "alignment offset"
+msgstr "對齊偏移"
-#: sys-utils/losetup.c:369
-#, fuzzy, c-format
-msgid "%s: failed to use backing file"
-msgstr "重新讀取分割表"
+#: misc-utils/lsblk.c:192
+#, fuzzy
+msgid "minimum I/O size"
+msgstr "最小 I/O 大小"
-#: sys-utils/losetup.c:377
+#: misc-utils/lsblk.c:193
#, fuzzy
-msgid "failed to setup loop device"
-msgstr "mount：設定環路裝置時失敗\n"
+msgid "optimal I/O size"
+msgstr "最佳化 I/O 大小"
-#: sys-utils/losetup.c:400
+#: misc-utils/lsblk.c:194
#, fuzzy
-msgid "find unused loop device failed"
-msgstr "tunelp：ioctl 失敗"
+msgid "physical sector size"
+msgstr "實體磁區大小"
-#: sys-utils/losetup.c:410 sys-utils/umount.c:226
-#, c-format
-msgid "%s"
-msgstr ""
+#: misc-utils/lsblk.c:195
+#, fuzzy
+msgid "logical sector size"
+msgstr "邏輯區大小"
-#: sys-utils/lscpu.c:63
-msgid "none"
-msgstr "無"
+#: misc-utils/lsblk.c:196
+#, fuzzy
+msgid "I/O scheduler name"
+msgstr "I/O 排程程式名稱"
-#: sys-utils/lscpu.c:64
-msgid "para"
-msgstr "部份"
+#: misc-utils/lsblk.c:197
+#, fuzzy
+msgid "request queue size"
+msgstr "要求佇列大小"
-#: sys-utils/lscpu.c:65
-msgid "full"
-msgstr "全部"
+#: misc-utils/lsblk.c:198
+#, fuzzy
+msgid "device type"
+msgstr "裝置類型"
-#: sys-utils/lscpu.c:108
-msgid "horizontal"
-msgstr ""
+#: misc-utils/lsblk.c:199
+#, fuzzy
+msgid "discard alignment offset"
+msgstr "捨棄對齊偏移"
-#: sys-utils/lscpu.c:109
-msgid "vertical"
-msgstr ""
+#: misc-utils/lsblk.c:200
+#, fuzzy
+msgid "discard granularity"
+msgstr "捨棄顆粒性"
-#: sys-utils/lscpu.c:235
-msgid "logical CPU number"
-msgstr ""
+#: misc-utils/lsblk.c:201
+#, fuzzy
+msgid "discard max bytes"
+msgstr "捨棄最大位元組"
-#: sys-utils/lscpu.c:236
+#: misc-utils/lsblk.c:202
#, fuzzy
-msgid "logical core number"
-msgstr "取得邏輯區塊 (磁區) 大小"
+msgid "discard zeroes data"
+msgstr "捨棄零資料"
-#: sys-utils/lscpu.c:237
+#: misc-utils/lsblk.c:203
#, fuzzy
-msgid "logical socket number"
-msgstr "取得邏輯區塊 (磁區) 大小"
+msgid "write same max bytes"
+msgstr "捨棄最大位元組"
-#: sys-utils/lscpu.c:238
-msgid "logical NUMA node number"
-msgstr ""
+#: misc-utils/lsblk.c:204
+#, fuzzy
+msgid "unique storage identifier"
+msgstr "唯一貯藏體識別碼"
-#: sys-utils/lscpu.c:239
-msgid "logical book number"
+#: misc-utils/lsblk.c:205
+msgid "Host:Channel:Target:Lun for SCSI"
msgstr ""
-#: sys-utils/lscpu.c:240
-msgid "shows how caches are shared between CPUs"
-msgstr ""
+#: misc-utils/lsblk.c:206
+#, fuzzy
+msgid "device transport type"
+msgstr "裝置類型"
-#: sys-utils/lscpu.c:241
-msgid "CPU dispatching mode on virtual hardware"
+#: misc-utils/lsblk.c:207
+msgid "de-duplicated chain of subsystems"
msgstr ""
-#: sys-utils/lscpu.c:242
-msgid "physical address of a CPU"
-msgstr ""
+#: misc-utils/lsblk.c:208
+#, fuzzy
+msgid "device revision"
+msgstr "裝置節點權限"
-#: sys-utils/lscpu.c:243
-msgid "shows if the hypervisor has allocated the CPU"
-msgstr ""
+#: misc-utils/lsblk.c:209
+#, fuzzy
+msgid "device vendor"
+msgstr "裝置名稱"
-#: sys-utils/lscpu.c:244
-msgid "shows if Linux currently makes use of the CPU"
+#: misc-utils/lsblk.c:210
+msgid "zone model"
msgstr ""
-#: sys-utils/lscpu.c:336
-msgid "error: uname failed"
-msgstr "錯誤：uname 失敗"
+#: misc-utils/lsblk.c:1233
+#, fuzzy
+msgid "failed to allocate device"
+msgstr "配置迭代器時失敗"
-#: sys-utils/lscpu.c:547
+#: misc-utils/lsblk.c:1273
#, fuzzy
-msgid "failed to allocate memory"
-msgstr "é\85\8d置輸å\87ºç·©è¡\9då\8d\80時失敗"
+msgid "failed to open device directory in sysfs"
+msgstr "é\96\8bå\95\9fè£\9dç½®ç\9b®é\8c\84å\9c¨ä¸ sysfs 時失敗"
-#: sys-utils/lscpu.c:859 sys-utils/lscpu.c:869
-#, c-format
-msgid "Y"
-msgstr ""
+#: misc-utils/lsblk.c:1455
+#, fuzzy, c-format
+msgid "%s: failed to get sysfs name"
+msgstr "%s：無法提取 dm 名稱"
-#: sys-utils/lscpu.c:859 sys-utils/lscpu.c:869
+#: misc-utils/lsblk.c:1467
#, fuzzy, c-format
-msgid "N"
-msgstr "NC"
+msgid "%s: failed to get whole-disk device number"
+msgstr "%s：無法提取 whole-disk 裝置編號"
-#: sys-utils/lscpu.c:943
+#: misc-utils/lsblk.c:1540 misc-utils/lsblk.c:1588
+#, fuzzy
+msgid "failed to allocate /sys handler"
+msgstr "配置迭代器時失敗"
+
+#: misc-utils/lsblk.c:1648 misc-utils/lsblk.c:1650 misc-utils/lsblk.c:1679
+#: misc-utils/lsblk.c:1681
#, fuzzy, c-format
-msgid ""
-"# The following is the parsable format, which can be fed to other\n"
-"# programs. Each different item in every column has an unique ID\n"
-"# starting from zero.\n"
-msgstr ""
-"# 下列是剖析格式，它可以被送入其他\n"
-"# 程式。每一欄中每個不同的項目有從零開始的\n"
-"# 唯一識別號。\n"
-"# CPU,核心,通訊端,節點"
+msgid "failed to parse list '%s'"
+msgstr "剖析清單『%s 時失敗』"
-#: sys-utils/lscpu.c:1075
-msgid "Architecture:"
-msgstr "架構："
+#. TRANSLATORS: The standard value for %d is 256.
+#: misc-utils/lsblk.c:1655
+#, fuzzy, c-format
+msgid "the list of excluded devices is too large (limit is %d devices)"
+msgstr "排除的裝置清單的太大 (限制是 %d 裝置)"
-#: sys-utils/lscpu.c:1089
-msgid "CPU op-mode(s):"
-msgstr "CPU 作業模式："
+#. TRANSLATORS: The standard value for %d is 256.
+#: misc-utils/lsblk.c:1686
+#, fuzzy, c-format
+msgid "the list of included devices is too large (limit is %d devices)"
+msgstr "包含的裝置清單的太大 (限制是 %d 裝置)"
-#: sys-utils/lscpu.c:1092 sys-utils/lscpu.c:1094
-msgid "Byte Order:"
-msgstr ""
+#: misc-utils/lsblk.c:1755 sys-utils/wdctl.c:207
+#, fuzzy, c-format
+msgid " %s [options] [<device> ...]\n"
+msgstr " %s [選項] [<device>...]\n"
-#: sys-utils/lscpu.c:1096
+#: misc-utils/lsblk.c:1758
#, fuzzy
-msgid "CPU(s):"
-msgstr "CPU 通訊端："
+msgid "List information about block devices.\n"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/lscpu.c:1099
-msgid "On-line CPU(s) mask:"
+#: misc-utils/lsblk.c:1761
+msgid " -D, --discard print discard capabilities\n"
msgstr ""
-#: sys-utils/lscpu.c:1100
-msgid "On-line CPU(s) list:"
-msgstr ""
+#: misc-utils/lsblk.c:1762
+#, fuzzy
+msgid " -E, --dedup <column> de-duplicate output by <column>\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/lscpu.c:1118
-msgid "Off-line CPU(s) mask:"
+#: misc-utils/lsblk.c:1763
+msgid " -I, --include <list> show only devices with specified major numbers\n"
msgstr ""
-#: sys-utils/lscpu.c:1119
-msgid "Off-line CPU(s) list:"
-msgstr ""
+#: misc-utils/lsblk.c:1764 sys-utils/lsmem.c:500
+#, fuzzy
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/lscpu.c:1150
-msgid "Thread(s) per core:"
-msgstr "每核心執行緒數："
+#: misc-utils/lsblk.c:1765
+#, fuzzy
+msgid " -O, --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/lscpu.c:1151
-msgid "Core(s) per socket:"
-msgstr "每通訊端核心數："
+#: misc-utils/lsblk.c:1767
+#, fuzzy
+msgid " -S, --scsi output info about SCSI devices\n"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: sys-utils/lscpu.c:1154
+#: misc-utils/lsblk.c:1768
#, fuzzy
-msgid "Socket(s) per book:"
-msgstr "每通訊端核心數："
+msgid " -T, --tree[=<column>] use tree format output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/lscpu.c:1156
-msgid "Book(s):"
-msgstr ""
+#: misc-utils/lsblk.c:1769
+#, fuzzy
+msgid " -a, --all print all devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/lscpu.c:1158
+#: misc-utils/lsblk.c:1771
#, fuzzy
-msgid "Socket(s):"
-msgstr "CPU 通訊端："
+msgid " -d, --nodeps don't print slaves or holders\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/lscpu.c:1162
-msgid "NUMA node(s):"
-msgstr "NUMA 節點："
+#: misc-utils/lsblk.c:1772
+msgid " -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
+msgstr ""
-#: sys-utils/lscpu.c:1164
-msgid "Vendor ID:"
-msgstr "供應商識別號："
+#: misc-utils/lsblk.c:1773
+#, fuzzy
+msgid " -f, --fs output info about filesystems\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/lscpu.c:1166
-msgid "CPU family:"
-msgstr "CPU 家族："
+#: misc-utils/lsblk.c:1774
+#, fuzzy
+msgid " -i, --ascii use ascii characters only\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
-#: sys-utils/lscpu.c:1168
-msgid "Model:"
-msgstr "型號："
+#: misc-utils/lsblk.c:1775
+#, fuzzy
+msgid " -l, --list use list format output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/lscpu.c:1170
-msgid "Stepping:"
-msgstr "製程："
+#: misc-utils/lsblk.c:1776
+#, fuzzy
+msgid " -M, --merge group parents of sub-trees (usable for RAIDs, Multi-path)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/lscpu.c:1172
-msgid "CPU MHz:"
-msgstr "CPU MHz："
+#: misc-utils/lsblk.c:1777
+#, fuzzy
+msgid " -m, --perms output info about permissions\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/lscpu.c:1174
-msgid "BogoMIPS:"
+#: misc-utils/lsblk.c:1778 sys-utils/lsmem.c:504
+msgid " -n, --noheadings don't print headings\n"
msgstr ""
-#: sys-utils/lscpu.c:1177 sys-utils/lscpu.c:1179
-msgid "Virtualization:"
-msgstr "虛擬："
+#: misc-utils/lsblk.c:1779 sys-utils/lsmem.c:505
+msgid " -o, --output <list> output columns\n"
+msgstr ""
-#: sys-utils/lscpu.c:1182
+#: misc-utils/lsblk.c:1780
#, fuzzy
-msgid "Hypervisor:"
-msgstr "Hypervisor 供應商："
-
-#: sys-utils/lscpu.c:1184
-msgid "Hypervisor vendor:"
-msgstr "Hypervisor 供應商："
+msgid " -p, --paths print complete device path\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/lscpu.c:1185
-msgid "Virtualization type:"
-msgstr "虛擬型態："
+#: misc-utils/lsblk.c:1782
+#, fuzzy
+msgid " -s, --inverse inverse dependencies\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/lscpu.c:1188
-msgid "Dispatching mode:"
+#: misc-utils/lsblk.c:1783
+msgid " -t, --topology output info about topology\n"
msgstr ""
-#: sys-utils/lscpu.c:1195
-#, c-format
-msgid "%s cache:"
-msgstr "%s 快取："
-
-#: sys-utils/lscpu.c:1201
-#, c-format
-msgid "NUMA node%d CPU(s):"
-msgstr "NUMA node%d CPU(s)："
+#: misc-utils/lsblk.c:1784
+#, fuzzy
+msgid " -z, --zoned print zone model\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/lscpu.c:1215
-msgid ""
-" -a, --all print online and offline CPUs (default for -e)\n"
-" -b, --online print online CPUs only (default for -p)\n"
-" -c, --offline print offline CPUs only\n"
-" -e, --extended[=<list>] print out an extended readable format\n"
-" -h, --help print this help\n"
-" -p, --parse[=<list>] print out a parsable format\n"
-" -s, --sysroot <dir> use directory DIR as system root\n"
-" -V, --version print version information and exit\n"
-" -x, --hex print hexadecimal masks rather than lists of CPUs\n"
+#: misc-utils/lsblk.c:1785
+msgid " -x, --sort <column> sort output by <column>\n"
msgstr ""
-#: sys-utils/lscpu.c:1230
+#: misc-utils/lsblk.c:1786
+#, fuzzy
+msgid " --sysroot <dir> use specified directory as system root\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: misc-utils/lsblk.c:1803
#, fuzzy, c-format
-msgid ""
-"\n"
-"For more details see lscpu(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 swaplabel(8)。\n"
+msgid "failed to access sysfs directory: %s"
+msgstr "存取 sysfs 目錄時失敗：%s"
-#: sys-utils/lscpu.c:1263
+#: misc-utils/lsblk.c:2142
#, fuzzy
-msgid "extended and parsable formats are mutually exclusive"
-msgstr "é\81¸é \85å½¼æ¤äº\92æ\96¥"
+msgid "failed to allocate device tree"
+msgstr "é\85\8dç½®è¿ä»£å\99¨æ\99\82失æ\95\97"
-#: sys-utils/lscpu.c:1266
+#: misc-utils/lslocks.c:73
#, fuzzy
-msgid "--all, --online and --offline options are mutually exclusive"
-msgstr "選項彼此互斥"
+msgid "command of the process holding the lock"
+msgstr "命令的處理保有鎖定"
-#: sys-utils/mount.c:64 sys-utils/umount.c:111
-#, fuzzy, c-format
-msgid "only root can use \"--%s\" option (effective UID is %u)"
-msgstr "mount：只有 root 可以那樣做 (有效 UID 是 %u)"
+#: misc-utils/lslocks.c:74
+#, fuzzy
+msgid "PID of the process holding the lock"
+msgstr "PID 的處理保有鎖定"
-#: sys-utils/mount.c:67 sys-utils/umount.c:114
-#, fuzzy, c-format
-msgid "only root can do that (effective UID is %u)"
-msgstr "mount：只有 root 可以那樣做 (有效 UID 是 %u)"
+#: misc-utils/lslocks.c:75
+#, fuzzy
+msgid "kind of lock"
+msgstr "大小的鎖定"
-#: sys-utils/mount.c:71 sys-utils/umount.c:118
-#, fuzzy, c-format
-msgid "only root can use \"--%s\" option"
-msgstr "mount：只有 root 可以將 %s 掛載到 %s"
+#: misc-utils/lslocks.c:76
+#, fuzzy
+msgid "size of the lock"
+msgstr "大小的鎖定"
-#: sys-utils/mount.c:72 sys-utils/umount.c:119
+#: misc-utils/lslocks.c:77
#, fuzzy
-msgid "only root can do that"
-msgstr "mount：只有 root 可以那樣做"
+msgid "lock access mode"
+msgstr "鎖定存取模式"
-#: sys-utils/mount.c:83 sys-utils/umount.c:56
-#, fuzzy, c-format
-msgid "%s from %s (libmount %s"
-msgstr "%s 來自 %s\n"
+#: misc-utils/lslocks.c:78
+#, fuzzy
+msgid "mandatory state of the lock: 0 (none), 1 (set)"
+msgstr "必要狀態的鎖定：0 (無)，1 (設定)"
-#: sys-utils/mount.c:100 sys-utils/umount.c:42
-#, fuzzy, c-format
-msgid "%s: parse error: ignore entry at line %d."
-msgstr "å\89\96æ\9e\90é\8c¯èª¤ç\99¼ç\94\9fæ\96¼å\88\97è\99\9fï¼\9a"
+#: misc-utils/lslocks.c:79
+#, fuzzy
+msgid "relative byte offset of the lock"
+msgstr "ç\9b¸å°\8dç\9a\84ä½\8då\85\83çµ\84å\81\8f移ç\9a\84é\8e\96å®\9a"
-#: sys-utils/mount.c:139
+#: misc-utils/lslocks.c:80
#, fuzzy
-msgid "failed to read mtab"
-msgstr "讀取時失敗：%s"
+msgid "ending offset of the lock"
+msgstr "結束部分偏移的鎖定"
-#: sys-utils/mount.c:197 sys-utils/umount.c:250
-#, c-format
-msgid "%-25s: ignored\n"
+#: misc-utils/lslocks.c:81
+#, fuzzy
+msgid "path of the locked file"
+msgstr "路徑的鎖定的檔案"
+
+#: misc-utils/lslocks.c:82
+#, fuzzy
+msgid "PID of the process blocking the lock"
+msgstr "PID 的處理保有鎖定"
+
+#: misc-utils/lslocks.c:259
+#, fuzzy
+msgid "failed to parse ID"
+msgstr "剖析 %s 時失敗"
+
+#: misc-utils/lslocks.c:281 sys-utils/nsenter.c:259
+msgid "failed to parse pid"
+msgstr "剖析 pid 時失敗"
+
+#: misc-utils/lslocks.c:285
+#, fuzzy
+msgid "(unknown)"
+msgstr "(不明)"
+
+#: misc-utils/lslocks.c:287
+msgid "(undefined)"
msgstr ""
-#: sys-utils/mount.c:198
-#, fuzzy, c-format
-msgid "%-25s: already mounted\n"
-msgstr "mount：%s 已經掛載到 %s\n"
+#: misc-utils/lslocks.c:296
+#, fuzzy
+msgid "failed to parse start"
+msgstr "剖析開始時失敗"
-#: sys-utils/mount.c:332
-#, fuzzy, c-format
-msgid "only root can mount %s on %s"
-msgstr "mount：只有 root 可以將 %s 掛載到 %s"
+#: misc-utils/lslocks.c:303
+#, fuzzy
+msgid "failed to parse end"
+msgstr "剖析結束時失敗"
-#: sys-utils/mount.c:335
-#, fuzzy, c-format
-msgid "%s is already mounted"
-msgstr "mount：%s 已經掛載到 %s\n"
+#: misc-utils/lslocks.c:531
+#, fuzzy
+msgid "List local system locks.\n"
+msgstr "無法設定系統時鐘。\n"
-#: sys-utils/mount.c:341
-#, fuzzy, c-format
-msgid "%s not mounted"
-msgstr "fsck：%s：找不到\n"
+#: misc-utils/lslocks.c:534
+#, fuzzy
+msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/mount.c:343
-#, fuzzy, c-format
-msgid "can't find %s in %s"
-msgstr "mount：無法在 %2$s 或 %3$s 中找到 %1$s"
+#: misc-utils/lslocks.c:536
+msgid " -i, --noinaccessible ignore locks without read permissions\n"
+msgstr ""
-#: sys-utils/mount.c:350
+#: misc-utils/lslocks.c:537 sys-utils/lsns.c:906 sys-utils/rfkill.c:582
#, fuzzy
-msgid "I could not determine the filesystem type, and none was specified"
-msgstr "mount：我無法決定檔案系統類型，而它並未被指定"
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/mount.c:353
+#: misc-utils/lslocks.c:538 sys-utils/lsns.c:907 sys-utils/rfkill.c:583
#, fuzzy
-msgid "you must specify the filesystem type"
-msgstr "mount：您必須指定檔案系統類型"
+msgid " -o, --output <list> define which output columns to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/mount.c:356
-#, fuzzy, c-format
-msgid "%s: mount failed"
-msgstr "掛載失敗"
+#: misc-utils/lslocks.c:539 sys-utils/lsns.c:908 sys-utils/rfkill.c:584
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/mount.c:366
-#, fuzzy, c-format
-msgid "%s: filesystem mounted, but mount(8) failed"
-msgstr "mount：掛載時失敗"
+#: misc-utils/lslocks.c:540
+msgid " -p, --pid <pid> display only locks held by this process\n"
+msgstr ""
-#: sys-utils/mount.c:385 sys-utils/mount.c:437
-#, fuzzy, c-format
-msgid "mount point %s is not a directory"
-msgstr "mount：掛載點 %s 並非目錄"
+#: misc-utils/lslocks.c:541 sys-utils/lsns.c:910 sys-utils/rfkill.c:585
+#, fuzzy
+msgid " -r, --raw use the raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/mount.c:389
+#: misc-utils/lslocks.c:606 schedutils/chrt.c:475 schedutils/ionice.c:177
+#: schedutils/taskset.c:171 sys-utils/choom.c:102 sys-utils/lsns.c:992
+#: sys-utils/prlimit.c:585
#, fuzzy
-msgid "must be superuser to use mount"
-msgstr "mount：必須是系統管理者才能使用掛載"
+msgid "invalid PID argument"
+msgstr "無效的 PID 引數"
-#: sys-utils/mount.c:397
-#, fuzzy, c-format
-msgid "%s is busy"
-msgstr "mount：%s 忙碌中"
+#: misc-utils/mcookie.c:86
+msgid "Generate magic cookies for xauth.\n"
+msgstr ""
-#: sys-utils/mount.c:401
-#, fuzzy, c-format
-msgid "%s is already mounted or %s busy"
-msgstr "mount：%s 已被掛載或者 %s 忙碌中"
+#: misc-utils/mcookie.c:89
+#, fuzzy
+msgid " -f, --file <file> use file as a cookie seed\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: sys-utils/mount.c:413
-#, fuzzy, c-format
-msgid " %s is already mounted on %s\n"
-msgstr "mount：%s 已經掛載到 %s\n"
+#: misc-utils/mcookie.c:90
+msgid " -m, --max-size <num> limit how much is read from seed files\n"
+msgstr ""
-#: sys-utils/mount.c:421
-#, fuzzy, c-format
-msgid "mount point %s does not exist"
-msgstr "mount：掛載點 %s 不存在"
+#: misc-utils/mcookie.c:91
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/mount.c:423
+#: misc-utils/mcookie.c:120
#, fuzzy, c-format
-msgid "mount point %s is a symbolic link to nowhere"
-msgstr "mount：掛載點 %s 是不明位置的符號連結"
+msgid "Got %zu byte from %s\n"
+msgid_plural "Got %zu bytes from %s\n"
+msgstr[0] "從 %2$s 取得 %1$d 位元組\n"
-#: sys-utils/mount.c:428
+#: misc-utils/mcookie.c:125
#, fuzzy, c-format
-msgid "special device %s does not exist"
-msgstr "mount：特殊裝置 %s 不存在"
+msgid "closing %s failed"
+msgstr "關閉 %s 失敗"
-#: sys-utils/mount.c:431 sys-utils/mount.c:446
+#: misc-utils/mcookie.c:164 sys-utils/blkdiscard.c:140 sys-utils/fstrim.c:446
+#: text-utils/hexdump.c:117
#, fuzzy
-msgid "mount(2) failed"
-msgstr "掛載失敗"
+msgid "failed to parse length"
+msgstr "剖析長度時失敗"
-#: sys-utils/mount.c:442
-#, fuzzy, c-format
-msgid "special device %s does not exist (a path prefix is not a directory)"
+#: misc-utils/mcookie.c:177
+msgid "--max-size ignored when used without --file"
msgstr ""
-"mount：特殊裝置 %s 不存在\n"
-" (路徑前綴並非目錄)\n"
-#: sys-utils/mount.c:452
+#: misc-utils/mcookie.c:186
#, fuzzy, c-format
-msgid "%s not mounted or bad option"
-msgstr "mount：%s 未被掛載，或是不當的選項"
+msgid "Got %d byte from %s\n"
+msgid_plural "Got %d bytes from %s\n"
+msgstr[0] "從 %2$s 取得 %1$d 位元組\n"
-#: sys-utils/mount.c:454
-#, fuzzy, c-format
-msgid ""
-"wrong fs type, bad option, bad superblock on %s,\n"
-" missing codepage or helper program, or other error"
-msgstr ""
-"mount：錯誤檔案系統類型、不當的選項、不當的超區塊於 %s,\n"
-" 缺少編碼頁或輔助程式，或其他錯誤"
+#: misc-utils/namei.c:90
+#, c-format
+msgid "failed to read symlink: %s"
+msgstr "讀取符號連結時失敗：%s"
-#: sys-utils/mount.c:460
+#: misc-utils/namei.c:334
#, fuzzy, c-format
-msgid ""
-" (for several filesystems (e.g. nfs, cifs) you might\n"
-" need a /sbin/mount.<type> helper program)\n"
+msgid " %s [options] <pathname>...\n"
+msgstr " %s [選項] <device> [...]\n"
+
+#: misc-utils/namei.c:337
+msgid "Follow a pathname until a terminal point is found.\n"
msgstr ""
-" (對於許多檔案系統 (例如 nfs，cifs) 您也許\n"
-" 需要 /sbin/mount.<type> 輔助程式)"
-#: sys-utils/mount.c:464
-#, fuzzy, c-format
+#: misc-utils/namei.c:341
+#, fuzzy
msgid ""
-" In some cases useful info is found in syslog - try\n"
-" dmesg | tail or so\n"
+" -x, --mountpoints show mount point directories with a 'D'\n"
+" -m, --modes show the mode bits of each file\n"
+" -o, --owners show owner and group name of each file\n"
+" -l, --long use a long listing format (-m -o -v) \n"
+" -n, --nosymlinks don't follow symlinks\n"
+" -v, --vertical vertical align of modes and owners\n"
msgstr ""
-" 在某些狀況下，syslog 中可以找到有用的資訊 - 嘗試\n"
-" dmesg | tail 之類命令\n"
+" -h, --help 顯示這份說明文字\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -x, --mountpoints 顯示掛載點目錄與『D』\n"
+" -m, --modes 顯示模式位元的每個檔案\n"
+" -o, --owners 顯示擁有者和群組名稱的每個檔案\n"
+" -l, --long 使用長列表格式 (-m -o -v)\n"
+" -n, --nosymlinks 不追隨符號連結\n"
+" -v, --vertical 垂直對齊的模式和擁有者\n"
-#: sys-utils/mount.c:473
-#, fuzzy, c-format
-msgid "%s: can't read superblock"
-msgstr "mount：%s: 無法讀取超區塊"
+#: misc-utils/namei.c:408
+#, fuzzy
+msgid "pathname argument is missing"
+msgstr "路徑名稱引數缺少"
-#: sys-utils/mount.c:477
-#, fuzzy, c-format
-msgid "unknown filesystem type '%s'"
-msgstr "mount：不明的檔案系統類型「%s」"
+#: misc-utils/namei.c:414 sys-utils/lsns.c:1069
+#, fuzzy
+msgid "failed to allocate UID cache"
+msgstr "配置迭代器時失敗"
-#: sys-utils/mount.c:485
-#, fuzzy, c-format
-msgid "%s is not a block device, and stat(2) fails?"
-msgstr "mount：%s 並非一個區塊裝置，而且取得狀態時失敗？"
+#: misc-utils/namei.c:417
+#, fuzzy
+msgid "failed to allocate GID cache"
+msgstr "配置迭代器時失敗"
-#: sys-utils/mount.c:487
-#, fuzzy, c-format
-msgid ""
-"the kernel does not recognize %s as a block device\n"
-" (maybe `modprobe driver'?)"
-msgstr ""
-"mount：內核無法識別 %s 為一個區塊裝置\n"
-" (也許要用「modprobe driver」?)"
+#: misc-utils/namei.c:439
+#, c-format
+msgid "%s: exceeded limit of symlinks"
+msgstr "%s：超出符號連結的限制"
-#: sys-utils/mount.c:490
+#: misc-utils/rename.c:74
#, fuzzy, c-format
-msgid "%s is not a block device (maybe try `-o loop'?)"
-msgstr "mount：%s 並非一個區塊裝置 (也許試試「-o loop」?)"
+msgid "%s: overwrite `%s'? "
+msgstr "%s：寫入錯誤：%s\n"
-#: sys-utils/mount.c:492
+#: misc-utils/rename.c:115 misc-utils/rename.c:172
#, fuzzy, c-format
-msgid " %s is not a block device"
-msgstr "%sï¼\9aä¸\8dæ\98¯å\8d\80å¡\8aè£\9dç½®\n"
+msgid "%s: not accessible"
+msgstr "%sï¼\9a並é\9d\9eç\9b®é\8c\84"
-#: sys-utils/mount.c:499
+#: misc-utils/rename.c:124
#, fuzzy, c-format
-msgid "%s is not a valid block device"
-msgstr "mount：%s 並非有效的區塊裝置"
+msgid "%s: not a symbolic link"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/mount.c:505
+#: misc-utils/rename.c:129
#, fuzzy, c-format
-msgid "cannot mount %s read-only"
-msgstr "mount：無法以唯讀方式掛載 %s%s"
+msgid "%s: readlink failed"
+msgstr "%s：開啟失敗"
-#: sys-utils/mount.c:508
+#: misc-utils/rename.c:144
#, fuzzy, c-format
-msgid "%s is write-protected but explicit `-w' flag given"
-msgstr "mount：%s%s 為防寫，但卻明確給定了「-w」旗標"
+msgid "Skipping existing link: `%s' -> `%s'\n"
+msgstr "…跳到檔案 "
-#: sys-utils/mount.c:511
+#: misc-utils/rename.c:150
#, fuzzy, c-format
-msgid "cannot remount %s read-write, is write-protected"
-msgstr "mount：無法重新將 %s%s 掛載成可讀可寫，其為防寫的"
+msgid "%s: unlink failed"
+msgstr "%s：lseek 失敗"
-#: sys-utils/mount.c:514
+#: misc-utils/rename.c:154
#, fuzzy, c-format
-msgid "%s is write-protected, mounting read-only"
-msgstr "mount：%s%s 為防寫，即將以唯讀方式掛載"
+msgid "%s: symlinking to %s failed"
+msgstr "%s：建立連結到 %s 失敗"
-#: sys-utils/mount.c:527
+#: misc-utils/rename.c:188
#, fuzzy, c-format
-msgid "no medium found on %s"
-msgstr "mount：%s 中找不到任何媒體"
+msgid "Skipping existing file: `%s'\n"
+msgstr "…跳到檔案 "
-#: sys-utils/mount.c:531
+#: misc-utils/rename.c:192
#, fuzzy, c-format
-msgid "mount %s on %s failed"
-msgstr "%s：重新命名 %s 為 %s 時失敗：%s\n"
+msgid "%s: rename to %s failed"
+msgstr "%s：建立連結到 %s 失敗"
-#: sys-utils/mount.c:553
+#: misc-utils/rename.c:206
#, fuzzy, c-format
-msgid "%s: failed to parse"
-msgstr "%s：無法開啟"
+msgid " %s [options] <expression> <replacement> <file>...\n"
+msgstr " %s [選項] 運算式置換檔案…\n"
-#: sys-utils/mount.c:562
-#, fuzzy, c-format
-msgid ""
-" %1$s [-lhV]\n"
-" %1$s -a [options]\n"
-" %1$s [options] <source> | <directory>\n"
-" %1$s [options] <source> <directory>\n"
-" %1$s <operation> <mountpoint> [<target>]\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %1$s [選項]\n"
-" %1$s [選項] <裝置> |<掛載點>\n"
-" %1$s [選項] <裝置> <掛載點>\n"
-" %1$s [選項] [--source <裝置>] [--target <掛載點>]\n"
+#: misc-utils/rename.c:210
+#, fuzzy
+msgid "Rename files.\n"
+msgstr "uname 失敗"
-#: sys-utils/mount.c:571
-#, c-format
-msgid ""
-" -a, --all mount all filesystems mentioned in fstab\n"
-" -c, --no-canonicalize don't canonicalize paths\n"
-" -f, --fake dry run; skip the mount(2) syscall\n"
-" -F, --fork fork off for each device (use with -a)\n"
-" -T, --fstab <path> alternative file to /etc/fstab\n"
-msgstr ""
+#: misc-utils/rename.c:213
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/mount.c:577
-#, c-format
-msgid ""
-" -h, --help display this help text and exit\n"
-" -i, --internal-only don't call the mount.<type> helpers\n"
-" -l, --show-labels lists all mounts with LABELs\n"
-" -n, --no-mtab don't write to /etc/mtab\n"
-msgstr ""
+#: misc-utils/rename.c:214
+#, fuzzy
+msgid " -s, --symlink act on the target of symlinks\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/mount.c:582
-#, c-format
-msgid ""
-" -o, --options <list> comma-separated list of mount options\n"
-" -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
-" -p, --pass-fd <num> read the passphrase from file descriptor\n"
-" -r, --read-only mount the filesystem read-only (same as -o ro)\n"
-" -t, --types <list> limit the set of filesystem types\n"
-msgstr ""
+#: misc-utils/rename.c:215
+#, fuzzy
+msgid " -n, --no-act do not make any changes\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/mount.c:588
-#, c-format
-msgid ""
-" -v, --verbose say what is being done\n"
-" -V, --version display version information and exit\n"
-" -w, --read-write mount the filesystem read-write (default)\n"
+#: misc-utils/rename.c:216
+msgid " -o, --no-overwrite don't overwrite existing files\n"
msgstr ""
-#: sys-utils/mount.c:597
-#, c-format
-msgid ""
-"\n"
-"Source:\n"
-" -L, --label <label> synonym for LABEL=<label>\n"
-" -U, --uuid <uuid> synonym for UUID=<uuid>\n"
-" LABEL=<label> specifies device by filesystem label\n"
-" UUID=<uuid> specifies device by filesystem UUID\n"
+#: misc-utils/rename.c:217
+msgid " -i, --interactive prompt before overwrite\n"
msgstr ""
-#: sys-utils/mount.c:603
-#, c-format
-msgid ""
-" <device> specifies device by path\n"
-" <directory> mountpoint for bind mounts (see --bind/rbind)\n"
-" <file> regular file for loopdev setup\n"
-msgstr ""
+#: misc-utils/rename.c:293
+#, fuzzy
+msgid "failed to get terminal attributes"
+msgstr "無法取得終端機屬性用於 %s"
-#: sys-utils/mount.c:608
-#, c-format
-msgid ""
-"\n"
-"Operations:\n"
-" -B, --bind mount a subtree somewhere else (same as -o bind)\n"
-" -M, --move move a subtree to some other place\n"
-" -R, --rbind mount a subtree and all submounts somewhere else\n"
+#: misc-utils/uuidd.c:64
+msgid "A daemon for generating UUIDs.\n"
msgstr ""
-#: sys-utils/mount.c:613
-#, c-format
-msgid ""
-" --make-shared mark a subtree as shared\n"
-" --make-slave mark a subtree as slave\n"
-" --make-private mark a subtree as private\n"
-" --make-unbindable mark a subtree as unbindable\n"
-msgstr ""
+#: misc-utils/uuidd.c:66
+#, fuzzy
+msgid " -p, --pid <path> path to pid file\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/mount.c:618
-#, c-format
-msgid ""
-" --make-rshared recursively mark a whole subtree as shared\n"
-" --make-rslave recursively mark a whole subtree as slave\n"
-" --make-rprivate recursively mark a whole subtree as private\n"
-" --make-runbindable recursively mark a whole subtree as unbindable\n"
-msgstr ""
+#: misc-utils/uuidd.c:67
+#, fuzzy
+msgid " -s, --socket <path> path to socket\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/mount.c:692 sys-utils/umount.c:316
+#: misc-utils/uuidd.c:68
#, fuzzy
-msgid "libmount context allocation failed"
-msgstr "mount：掛載時失敗"
+msgid " -T, --timeout <sec> specify inactivity timeout\n"
+msgstr " -w --timeout <secs> 等待限制的數目的時間\n"
-#: sys-utils/mount.c:727 sys-utils/mount.c:738 sys-utils/mount.c:743
+#: misc-utils/uuidd.c:69
#, fuzzy
-msgid "failed to append options"
-msgstr "剖析 pid 時失敗"
+msgid " -k, --kill kill running daemon\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#: sys-utils/mount.c:747 sys-utils/umount.c:361
+#: misc-utils/uuidd.c:70
#, fuzzy
-msgid "failed to set options pattern"
-msgstr "取得 pid %d 的屬性時失敗"
+msgid " -r, --random test random-based generation\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/mount.c:756
-msgid "only one <source> may be specified"
-msgstr ""
+#: misc-utils/uuidd.c:71
+#, fuzzy
+msgid " -t, --time test time-based generation\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
-#: sys-utils/mount.c:759
+#: misc-utils/uuidd.c:72
#, fuzzy
-msgid "failed to allocate source buffer"
-msgstr "配置輸出緩衝區時失敗"
+msgid " -n, --uuids <num> request number of uuids\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
-#: sys-utils/mountpoint.c:113
-#, c-format
-msgid ""
-" %1$s [-qd] /path/to/directory\n"
-" %1$s -x /dev/device\n"
-msgstr ""
+#: misc-utils/uuidd.c:73
+#, fuzzy
+msgid " -P, --no-pid do not create pid file\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
-#: sys-utils/mountpoint.c:117
-msgid ""
-" -q, --quiet quiet mode - don't print anything\n"
-" -d, --fs-devno print maj:min device number of the filesystem\n"
-" -x, --devno print maj:min device number of the block device\n"
-" -h, --help this help\n"
-msgstr ""
+#: misc-utils/uuidd.c:74
+#, fuzzy
+msgid " -F, --no-fork do not daemonize using double-fork\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: misc-utils/uuidd.c:75
+#, fuzzy
+msgid " -S, --socket-activation do not create listening socket\n"
+msgstr "兩者 --socket-activation 和 --socket 指定的。忽略 --socket\n"
+
+#: misc-utils/uuidd.c:76
+#, fuzzy
+msgid " -d, --debug run in debugging mode\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: misc-utils/uuidd.c:77
+#, fuzzy
+msgid " -q, --quiet turn on quiet mode\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: misc-utils/uuidd.c:109
+msgid "bad arguments"
+msgstr "不當的引數"
+
+#: misc-utils/uuidd.c:116
+msgid "socket"
+msgstr "通訊端"
+
+#: misc-utils/uuidd.c:127
+msgid "connect"
+msgstr "連接"
+
+#: misc-utils/uuidd.c:147
+msgid "write"
+msgstr "寫入"
+
+#: misc-utils/uuidd.c:155
+msgid "read count"
+msgstr "讀取計數"
-#: sys-utils/mountpoint.c:122
+#: misc-utils/uuidd.c:161
+msgid "bad response length"
+msgstr "不當的回應長度"
+
+#: misc-utils/uuidd.c:212
#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see mountpoint(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 ipcmk(1)。\n"
-"\n"
+msgid "cannot lock %s"
+msgstr "無法開啟 %s"
+
+#: misc-utils/uuidd.c:237
+#, fuzzy
+msgid "couldn't create unix stream socket"
+msgstr "無法建立 unix 串流通訊端：%m"
-#: sys-utils/mountpoint.c:191
+#: misc-utils/uuidd.c:262
#, fuzzy, c-format
-msgid "%s is not a mountpoint\n"
-msgstr "%s：並非目錄"
+msgid "couldn't bind unix socket %s"
+msgstr "無法繫結 unix 通訊端 %s：%m\n"
+
+#: misc-utils/uuidd.c:289
+#, fuzzy
+msgid "receiving signal failed"
+msgstr "重新命名 %s 到 %s 失敗"
+
+#: misc-utils/uuidd.c:304
+msgid "timed out"
+msgstr "已逾時"
+
+#: misc-utils/uuidd.c:339 sys-utils/flock.c:274
+#, fuzzy
+msgid "cannot set up timer"
+msgstr "無法設定群組識別號"
-#: sys-utils/mountpoint.c:197
+#: misc-utils/uuidd.c:347
#, fuzzy, c-format
-msgid "%s is a mountpoint\n"
-msgstr "%s 已掛載。\t"
+msgid "uuidd daemon is already running at pid %s"
+msgstr "uuidd 守護程式已經以 pid %s 運行中\n"
-#: sys-utils/pivot_root.c:32
+#: misc-utils/uuidd.c:356
#, fuzzy, c-format
-msgid " %s [options] new_root put_old\n"
-msgstr ""
-"用法：%s [選項] <掛載點>\n"
-"\n"
-"選項：\n"
+msgid "couldn't listen on unix socket %s"
+msgstr "無法聽取於 unix 通訊端 %s：%m\n"
-#: sys-utils/pivot_root.c:69
+#: misc-utils/uuidd.c:366
#, fuzzy, c-format
-msgid "failed to change root from `%s' to `%s'"
-msgstr "設定身分為 %s 時失敗"
+msgid "could not truncate file: %s"
+msgstr "無法顯示狀態「%s」"
-#: sys-utils/prlimit.c:69
-msgid "address space limit"
+#: misc-utils/uuidd.c:380
+#, fuzzy
+msgid "sd_listen_fds() failed"
+msgstr "settimeofday() 失敗"
+
+#: misc-utils/uuidd.c:383
+msgid "no file descriptors received, check systemctl status uuidd.socket"
msgstr ""
-#: sys-utils/prlimit.c:70
+#: misc-utils/uuidd.c:386
#, fuzzy
-msgid "max core file size"
-msgstr "無法開啟檔案 '%s'"
+msgid "too many file descriptors received, check uuidd.socket"
+msgstr "沒有或太多檔案描述符號接收。\n"
-#: sys-utils/prlimit.c:70 sys-utils/prlimit.c:73
+#: misc-utils/uuidd.c:414
#, fuzzy
-msgid "blocks"
-msgstr "%ld 區塊\n"
+msgid "poll failed"
+msgstr "意見調查() 失敗"
-#: sys-utils/prlimit.c:71
-#, fuzzy
-msgid "CPU time"
-msgstr "CPU 清單"
+#: misc-utils/uuidd.c:419
+#, fuzzy, c-format
+msgid "timeout [%d sec]\n"
+msgstr "已逾時之後 %u 秒"
-#: sys-utils/prlimit.c:71
+#: misc-utils/uuidd.c:437 term-utils/setterm.c:923 text-utils/column.c:495
+#: text-utils/column.c:518
#, fuzzy
-msgid "seconds"
-msgstr "DOS 次級"
+msgid "read failed"
+msgstr "fread 失敗"
-#: sys-utils/prlimit.c:72
-msgid "max data size"
-msgstr ""
+#: misc-utils/uuidd.c:439
+#, fuzzy, c-format
+msgid "error reading from client, len = %d"
+msgstr "從客戶端讀取時發生錯誤，長度 = %d\n"
-#: sys-utils/prlimit.c:73
-#, fuzzy
-msgid "max file size"
-msgstr "不當的 inode 大小"
+#: misc-utils/uuidd.c:448
+#, c-format
+msgid "operation %d, incoming num = %d\n"
+msgstr "操作 %d，即將來到的數字 = %d\n"
+
+#: misc-utils/uuidd.c:451
+#, c-format
+msgid "operation %d\n"
+msgstr "操作 %d\n"
+
+#: misc-utils/uuidd.c:467
+#, c-format
+msgid "Generated time UUID: %s\n"
+msgstr "產生的時間 UUID：%s\n"
+
+#: misc-utils/uuidd.c:477
+#, c-format
+msgid "Generated random UUID: %s\n"
+msgstr "產生的隨機 UUID：%s\n"
+
+#: misc-utils/uuidd.c:486
+#, fuzzy, c-format
+msgid "Generated time UUID %s and %d following\n"
+msgid_plural "Generated time UUID %s and %d following\n"
+msgstr[0] "產生的時間 UUID %s 和 %d 下列\n"
+
+#: misc-utils/uuidd.c:507
+#, fuzzy, c-format
+msgid "Generated %d UUID:\n"
+msgid_plural "Generated %d UUIDs:\n"
+msgstr[0] "產生 %d UUID：\n"
-#: sys-utils/prlimit.c:74
+#: misc-utils/uuidd.c:521
+#, c-format
+msgid "Invalid operation %d\n"
+msgstr "無效的操作 %d\n"
+
+#: misc-utils/uuidd.c:533
+#, fuzzy, c-format
+msgid "Unexpected reply length from server %d"
+msgstr "未預期的回覆長度從伺服器 %d"
+
+#: misc-utils/uuidd.c:594
#, fuzzy
-msgid "max number of file locks held"
-msgstr "最大資料段數量 = %lu\n"
+msgid "failed to parse --uuids"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/prlimit.c:75
-msgid "max locked-in-memory address space"
-msgstr ""
+#: misc-utils/uuidd.c:611
+#, fuzzy
+msgid "uuidd has been built without support for socket activation"
+msgstr "uuidd 已被 built 而無需支援用於通訊端活化。\n"
-#: sys-utils/prlimit.c:76
-msgid "max bytes in POSIX mqueues"
-msgstr ""
+#: misc-utils/uuidd.c:630
+#, fuzzy
+msgid "failed to parse --timeout"
+msgstr "剖析大小時失敗"
-#: sys-utils/prlimit.c:77
-msgid "max nice prio allowed to raise"
-msgstr ""
+#: misc-utils/uuidd.c:643
+#, fuzzy, c-format
+msgid "socket name too long: %s"
+msgstr "卷冊名稱太長"
-#: sys-utils/prlimit.c:78
+#: misc-utils/uuidd.c:650
#, fuzzy
-msgid "max number of open files"
-msgstr "最大資料段數量 = %lu\n"
+msgid "Both --socket-activation and --socket specified. Ignoring --socket."
+msgstr "兩者 --socket-activation 和 --socket 指定的。忽略 --socket\n"
-#: sys-utils/prlimit.c:79
+#: misc-utils/uuidd.c:657 misc-utils/uuidd.c:685
+#, fuzzy, c-format
+msgid "error calling uuidd daemon (%s)"
+msgstr "呼叫 uuidd 守護程式 (%s) 時發生錯誤：%m\n"
+
+#: misc-utils/uuidd.c:658 misc-utils/uuidd.c:686
#, fuzzy
-msgid "max number of processes"
-msgstr "最大資料段數量 = %lu\n"
+msgid "unexpected error"
+msgstr "%s：未預期的檔案格式"
-#: sys-utils/prlimit.c:80
-msgid "max resident set size"
+#: misc-utils/uuidd.c:666
+#, fuzzy, c-format
+msgid "%s and %d subsequent UUID\n"
+msgid_plural "%s and %d subsequent UUIDs\n"
+msgstr[0] "%s 和 %d 後續 UUID\n"
+
+#: misc-utils/uuidd.c:670
+#, c-format
+msgid "List of UUIDs:\n"
+msgstr "UUIDs 列表：\n"
+
+#: misc-utils/uuidd.c:702
+#, fuzzy, c-format
+msgid "couldn't kill uuidd running at pid %d"
+msgstr "無法砍除 uuidd 執行中於 pid %d：%m\n"
+
+#: misc-utils/uuidd.c:707
+#, fuzzy, c-format
+msgid "Killed uuidd running at pid %d.\n"
+msgstr "已砍除執行於 pid %d 的 uuidd\n"
+
+#: misc-utils/uuidgen.c:29
+msgid "Create a new UUID value.\n"
msgstr ""
-#: sys-utils/prlimit.c:80
+#: misc-utils/uuidgen.c:32
#, fuzzy
-msgid "pages"
-msgstr "訊息"
+msgid " -r, --random generate random-based uuid\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/prlimit.c:81
+#: misc-utils/uuidgen.c:33
#, fuzzy
-msgid "max real-time priority"
-msgstr "getpriority"
+msgid " -t, --time generate time-based uuid\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
-#: sys-utils/prlimit.c:82
-msgid "timeout for real-time tasks"
+#: misc-utils/uuidgen.c:34
+msgid " -n, --namespace ns generate hash-based uuid in this namespace\n"
msgstr ""
-#: sys-utils/prlimit.c:82
-msgid "microsecs"
+#: misc-utils/uuidgen.c:35
+msgid " -N, --name name generate hash-based uuid from this name\n"
msgstr ""
-#: sys-utils/prlimit.c:83
+#: misc-utils/uuidgen.c:36
#, fuzzy
-msgid "max number of pending signals"
-msgstr "最大資料段數量 = %lu\n"
-
-#: sys-utils/prlimit.c:84
-msgid "max stack size"
-msgstr ""
+msgid " -m, --md5 generate md5 hash\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/prlimit.c:115
+#: misc-utils/uuidgen.c:37
#, fuzzy
-msgid "resource name"
-msgstr "不合法的使用者名稱"
+msgid " -s, --sha1 generate sha1 hash\n"
+msgstr " -s --shared 提取共享的鎖定\n"
-#: sys-utils/prlimit.c:116
+#: misc-utils/uuidgen.c:38
#, fuzzy
-msgid "resource description"
-msgstr "區塊裝置 "
+msgid " -x, --hex interpret name as hex string\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/prlimit.c:117
-msgid "soft limit"
-msgstr ""
+#: misc-utils/uuidparse.c:76
+#, fuzzy
+msgid "unique identifier"
+msgstr "唯一貯藏體識別碼"
-#: sys-utils/prlimit.c:118
-msgid "hard limit (ceiling)"
-msgstr ""
+#: misc-utils/uuidparse.c:77
+#, fuzzy
+msgid "variant name"
+msgstr "分割名稱"
-#: sys-utils/prlimit.c:119
+#: misc-utils/uuidparse.c:78
#, fuzzy
-msgid "units"
-msgstr "單位"
+msgid "type name"
+msgstr "使用者名稱"
-#: sys-utils/prlimit.c:155
-#, fuzzy, c-format
-msgid " %s [options] [-p PID]\n"
+#: misc-utils/uuidparse.c:79
+msgid "timestamp"
msgstr ""
-"\n"
-"用法：%s [選項]\n"
-"\n"
-#: sys-utils/prlimit.c:157
+#: misc-utils/uuidparse.c:97
#, fuzzy, c-format
-msgid " %s [options] COMMAND\n"
-msgstr "用法：%s [選項]\n"
+msgid " %s [options] <uuid ...>\n"
+msgstr " %s [選項] [<file>]\n"
-#: sys-utils/prlimit.c:159
+#: misc-utils/uuidparse.c:100
#, fuzzy
-msgid ""
-"\n"
-"General Options:\n"
-msgstr ""
-"\n"
-"選項：\n"
+msgid " -J, --json use JSON output format"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/prlimit.c:160
-msgid ""
-" -p, --pid <pid> process id\n"
-" -o, --output <list> define which output columns to use\n"
-" --noheadings don't print headings\n"
-" --raw use the raw output format\n"
-" --verbose verbose output\n"
-" -h, --help display this help and exit\n"
-" -V, --version output version information and exit\n"
-msgstr ""
+#: misc-utils/uuidparse.c:101
+#, fuzzy
+msgid " -n, --noheadings don't print headings"
+msgstr " -f 不分割長列\n"
-#: sys-utils/prlimit.c:168
+#: misc-utils/uuidparse.c:102
#, fuzzy
-msgid ""
-"\n"
-"Resources Options:\n"
-msgstr "危險選項："
+msgid " -o, --output <list> COLUMNS to display (see below)"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/prlimit.c:169
-msgid ""
-" -c, --core maximum size of core files created\n"
-" -d, --data maximum size of a process's data segment\n"
-" -e, --nice maximum nice priority allowed to raise\n"
-" -f, --fsize maximum size of files written by the process\n"
-" -i, --sigpending maximum number of pending signals\n"
-" -l, --memlock maximum size a process may lock into memory\n"
-" -m, --rss maximum resident set size\n"
-" -n, --nofile maximum number of open files\n"
-" -q, --msgqueue maximum bytes in POSIX message queues\n"
-" -r, --rtprio maximum real-time scheduling priority\n"
-" -s, --stack maximum stack size\n"
-" -t, --cpu maximum amount of CPU time in seconds\n"
-" -u, --nproc maximum number of user processes\n"
-" -v, --as size of virtual memory\n"
-" -x, --locks maximum number of file locks\n"
-" -y, --rttime CPU time in microseconds a process scheduled\n"
-" under real-time scheduling\n"
-msgstr ""
+#: misc-utils/uuidparse.c:103
+#, fuzzy
+msgid " -r, --raw use the raw output format"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/prlimit.c:187
+#: misc-utils/uuidparse.c:172 misc-utils/uuidparse.c:191
+#: misc-utils/uuidparse.c:222
#, fuzzy
-msgid ""
-"\n"
-"Available columns (for --output):\n"
-msgstr "可用命令：\n"
+msgid "invalid"
+msgstr "無效的識別號"
-#: sys-utils/prlimit.c:319
-#, fuzzy, c-format
-msgid "failed to get old %s limit"
-msgstr "取得 pid %d 的近似者時失敗"
+#: misc-utils/uuidparse.c:186
+msgid "other"
+msgstr ""
-#: sys-utils/prlimit.c:343
-#, c-format
-msgid "the soft limit %s cannot exceed the hard limit"
+#: misc-utils/uuidparse.c:197
+msgid "nil"
msgstr ""
-#: sys-utils/prlimit.c:350
-#, c-format
-msgid "New %s limit: "
+#: misc-utils/uuidparse.c:202
+msgid "time-based"
msgstr ""
-#: sys-utils/prlimit.c:352 sys-utils/prlimit.c:357
-msgid "unlimited"
+#: misc-utils/uuidparse.c:208
+msgid "name-based"
msgstr ""
-#: sys-utils/prlimit.c:364
-#, fuzzy, c-format
-msgid "failed to set the %s resource limit"
-msgstr "設定 pid %d 的策略時失敗"
+#: misc-utils/uuidparse.c:211
+msgid "random"
+msgstr ""
-#: sys-utils/prlimit.c:365
-#, fuzzy, c-format
-msgid "failed to get the %s resource limit"
-msgstr "取得 pid %d 的策略時失敗"
+#: misc-utils/uuidparse.c:214
+msgid "sha1-based"
+msgstr ""
-#: sys-utils/prlimit.c:444
+#: misc-utils/uuidparse.c:267 misc-utils/wipefs.c:177 sys-utils/lscpu.c:2009
+#: sys-utils/lsns.c:806 sys-utils/zramctl.c:503
+msgid "failed to initialize output column"
+msgstr "初始化輸出欄時失敗"
+
+#: misc-utils/whereis.c:199
#, fuzzy, c-format
-msgid "failed to parse %s limit"
-msgstr "剖析 %s %s 時失敗"
+msgid " %s [options] [-BMS <dir>... -f] <name>\n"
+msgstr " %s [選項] [<file>]\n"
-#: sys-utils/prlimit.c:580
-msgid "only use one PID at a time"
+#: misc-utils/whereis.c:202
+msgid "Locate the binary, source, and manual-page files for a command.\n"
msgstr ""
-#: sys-utils/prlimit.c:582
+#: misc-utils/whereis.c:205
#, fuzzy
-msgid "cannot parse PID"
-msgstr "無法開啟 %s"
+msgid " -b search only for binaries\n"
+msgstr " -f 不分割長列\n"
+
+#: misc-utils/whereis.c:206
+msgid " -B <dirs> define binaries lookup path\n"
+msgstr ""
-#: sys-utils/prlimit.c:615
+#: misc-utils/whereis.c:207
#, fuzzy
-msgid "--pid option and COMMAND are mutually exclusive"
-msgstr "選項彼此互斥"
+msgid " -m search only for manuals and infos\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/readprofile.c:107
-#, c-format
-msgid " -m, --mapfile <mapfile> (defaults: \"%s\" and\n"
+#: misc-utils/whereis.c:208
+msgid " -M <dirs> define man and info lookup path\n"
msgstr ""
-#: sys-utils/readprofile.c:109
-#, fuzzy, c-format
-msgid " \"%s\")\n"
-msgstr " 第一個 最後的\n"
+#: misc-utils/whereis.c:209
+msgid " -s search only for sources\n"
+msgstr ""
-#: sys-utils/readprofile.c:111
-#, c-format
-msgid " -p, --profile <pro-file> (default: \"%s\")\n"
+#: misc-utils/whereis.c:210
+msgid " -S <dirs> define sources lookup path\n"
msgstr ""
-#: sys-utils/readprofile.c:112
-msgid " -M, --multiplier <mult> set the profiling multiplier to <mult>\n"
+#: misc-utils/whereis.c:211
+#, fuzzy
+msgid " -f terminate <dirs> argument list\n"
+msgstr " -n 終止命令與換列\n"
+
+#: misc-utils/whereis.c:212
+msgid " -u search for unusual entries\n"
msgstr ""
-#: sys-utils/readprofile.c:113
+#: misc-utils/whereis.c:213
+msgid " -l output effective lookup paths\n"
+msgstr ""
+
+#: misc-utils/whereis.c:661
#, fuzzy
-msgid " -i, --info print only info about the sampling step\n"
-msgstr " -u, --unqote 輸出不加上引號\n"
+msgid "option -f is missing"
+msgstr "路徑名稱引數缺少"
-#: sys-utils/readprofile.c:114
+#: misc-utils/wipefs.c:108
#, fuzzy
-msgid " -v, --verbose print verbose data\n"
-msgstr " -V, --version 輸出版本資訊\n"
+msgid "partition/filesystem UUID"
+msgstr "檔案系統 UUID"
-#: sys-utils/readprofile.c:115
-#, fuzzy
-msgid " -a, --all print all symbols, even if count is 0\n"
-msgstr " -h, --help 這份簡單用法說明\n"
-
-#: sys-utils/readprofile.c:116
-msgid " -b, --histbin print individual histogram-bin counts\n"
+#: misc-utils/wipefs.c:110
+msgid "magic string length"
msgstr ""
-#: sys-utils/readprofile.c:117
-msgid " -s, --counters print individual counters within functions\n"
+#: misc-utils/wipefs.c:111
+msgid "superblok type"
msgstr ""
-#: sys-utils/readprofile.c:118
+#: misc-utils/wipefs.c:112
#, fuzzy
-msgid " -r, --reset reset all the counters (root only)\n"
-msgstr " -T, --test 測試 getopt(1) 的版本\n"
+msgid "magic string offset"
+msgstr "不當的 inode 偏移值"
-#: sys-utils/readprofile.c:119
-msgid " -n, --no-auto disable byte order auto-detection\n"
-msgstr ""
+#: misc-utils/wipefs.c:113
+#, fuzzy
+msgid "type description"
+msgstr "旗標描述"
-#: sys-utils/readprofile.c:235
-#, fuzzy, c-format
-msgid "error writing %s"
-msgstr "寫å\85¥ %s æ\99\82ç\99¼ç\94\9fé\8c¯èª¤ï¼\9a%s"
+#: misc-utils/wipefs.c:114
+#, fuzzy
+msgid "block device name"
+msgstr "å\8d\80å¡\8aè£\9dç½® "
-#: sys-utils/readprofile.c:266
+#: misc-utils/wipefs.c:331
#, fuzzy
-msgid "Assuming reversed byte order. Use -n to force native byte order."
-msgstr "å\81\87è¨å\8f\8då\90\91ç\9a\84ä½\8då\85\83çµ\84次åº\8fã\80\82使ç\94¨ -n 以強å\88¶å\8e\9fç\94\9fä½\8då\85\83çµ\84次åº\8fã\80\82\n"
+msgid "partition-table"
+msgstr "å\88\86å\89²æ¨\99è²¼"
-#: sys-utils/readprofile.c:281
+#: misc-utils/wipefs.c:419
#, c-format
-msgid "Sampling_step: %i\n"
-msgstr "取樣率：%i\n"
+msgid "error: %s: probing initialization failed"
+msgstr "錯誤：%s：試探初始化時失敗"
-#: sys-utils/readprofile.c:297 sys-utils/readprofile.c:318
+#: misc-utils/wipefs.c:470
#, fuzzy, c-format
-msgid "%s(%i): wrong map line"
-msgstr "%s: %s(%i)：錯誤對映列\n"
+msgid "%s: failed to erase %s magic string at offset 0x%08jx"
+msgstr "%s：無法清除 %s 魔術字串於偏移 0x%08 jx"
-#: sys-utils/readprofile.c:308
+#: misc-utils/wipefs.c:476
#, fuzzy, c-format
-msgid "can't find \"_stext\" in %s"
-msgstr "%s：在 %s 中找不到「_stext」\n"
-
-#: sys-utils/readprofile.c:341
-#, fuzzy
-msgid "profile address out of range. Wrong map file?"
-msgstr "%s：側寫檔位址超出範圍。錯誤的對映檔案？\n"
+msgid "%s: %zd byte was erased at offset 0x%08jx (%s): "
+msgid_plural "%s: %zd bytes were erased at offset 0x%08jx (%s): "
+msgstr[0] "%s：%zd 位元組被清除於偏移 0x%08 jx (%s)："
-#: sys-utils/readprofile.c:399
-msgid "total"
-msgstr "總計"
+#: misc-utils/wipefs.c:505
+#, fuzzy, c-format
+msgid "%s: failed to create a signature backup"
+msgstr "%s：無法寫入簽名頁面"
-#: sys-utils/renice.c:56
+#: misc-utils/wipefs.c:531
#, fuzzy, c-format
-msgid ""
-" %1$s [-n] <priority> [-p] <pid> [<pid> ...]\n"
-" %1$s [-n] <priority> -g <pgrp> [<pgrp> ...]\n"
-" %1$s [-n] <priority> -u <user> [<user> ...]\n"
+msgid "%s: calling ioctl to re-read partition table: %m\n"
+msgstr "呼叫 ioctl() 以重新讀取分割表。\n"
+
+#: misc-utils/wipefs.c:554
+msgid "failed to create a signature backup, $HOME undefined"
msgstr ""
-"\n"
-"用法：\n"
-" renice [-n] 優先權 [-p|--pid] pid [... pid]\n"
-" renice [-n] 優先權 -g|--pgrp pgrp [... pgrp]\n"
-" renice [-n] 優先權 -u|--user 使用者 [...使用者]\n"
-" renice -h | --help\n"
-" renice -v | --version\n"
-"\n"
-#: sys-utils/renice.c:62
-msgid ""
-" -g, --pgrp <id> interpret as process group ID\n"
-" -h, --help print help\n"
-" -n, --priority <num> set the nice increment value\n"
-" -p, --pid <id> force to be interpreted as process ID\n"
-" -u, --user <name|id> interpret as username or user ID\n"
-" -v, --version print version\n"
+#: misc-utils/wipefs.c:572
+#, c-format
+msgid "%s: ignoring nested \"%s\" partition table on non-whole disk device"
msgstr ""
-#: sys-utils/renice.c:69
+#: misc-utils/wipefs.c:601
+#, fuzzy, c-format
+msgid "%s: offset 0x%jx not found"
+msgstr "%s：找不到偏移 0x%jx "
+
+#: misc-utils/wipefs.c:606
#, fuzzy
-msgid ""
-"\n"
-"For more information see renice(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 namei(1)。\n"
+msgid "Use the --force option to force erase."
+msgstr "使用 --force 旗標以駁回所有檢查。\n"
-#: sys-utils/renice.c:100
-#, c-format
-msgid "renice from %s\n"
-msgstr "renice 自 %s\n"
+#: misc-utils/wipefs.c:644
+#, fuzzy
+msgid "Wipe signatures from a device."
+msgstr "%s：寫入簽章時失敗"
-#: sys-utils/renice.c:137
-#, fuzzy, c-format
-msgid "unknown user %s"
-msgstr "不明直欄：%s"
+#: misc-utils/wipefs.c:647
+#, fuzzy
+msgid " -a, --all wipe all magic strings (BE CAREFUL!)"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/renice.c:144
-#, fuzzy, c-format
-msgid "bad value %s"
-msgstr "不當的逾時設定值：%s"
+#: misc-utils/wipefs.c:648
+#, fuzzy
+msgid " -b, --backup create a signature backup in $HOME"
+msgstr "%s：無法寫入簽名頁面"
-#: sys-utils/renice.c:156
-msgid "process ID"
-msgstr ""
+#: misc-utils/wipefs.c:649
+#, fuzzy
+msgid " -f, --force force erasure"
+msgstr " -f 強制檢查\n"
-#: sys-utils/renice.c:159
+#: misc-utils/wipefs.c:650
#, fuzzy
-msgid "user ID"
-msgstr "使用者"
+msgid " -i, --noheadings don't print headings"
+msgstr " -f 不分割長列\n"
-#: sys-utils/renice.c:161
-msgid "process group ID"
+#: misc-utils/wipefs.c:651
+#, fuzzy
+msgid " -J, --json use JSON output format"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: misc-utils/wipefs.c:652
+#, fuzzy
+msgid " -n, --no-act do everything except the actual write() call"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: misc-utils/wipefs.c:653
+#, fuzzy
+msgid " -o, --offset <num> offset to erase, in bytes"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: misc-utils/wipefs.c:654
+msgid " -O, --output <list> COLUMNS to display (see below)"
msgstr ""
-#: sys-utils/renice.c:166 sys-utils/renice.c:176
-#, fuzzy, c-format
-msgid "failed to get priority for %d (%s)"
-msgstr "設定身分為 %s 時失敗"
+#: misc-utils/wipefs.c:655
+#, fuzzy
+msgid " -p, --parsable print out in parsable instead of printable format"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/renice.c:170
-#, fuzzy, c-format
-msgid "failed to set priority for %d (%s)"
-msgstr "設定身分為 %s 時失敗"
+#: misc-utils/wipefs.c:656
+#, fuzzy
+msgid " -q, --quiet suppress output messages"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: sys-utils/renice.c:180
-#, fuzzy, c-format
-msgid "%d (%s) old priority %d, new priority %d\n"
-msgstr "%d: 舊的優先權 %d, 新的優先權 %d\n"
+#: misc-utils/wipefs.c:657
+#, fuzzy
+msgid " -t, --types <list> limit the set of filesystem, RAIDs or partition tables"
+msgstr " l 列出已知檔案系統類型"
+
+#: misc-utils/wipefs.c:762
+#, fuzzy
+msgid "The --backup option is meaningless in this context"
+msgstr "選項 --offset 未被允許在中這個語境。"
-#: sys-utils/rtcwake.c:90
+#: schedutils/chrt.c:135
+msgid "Show or change the real-time scheduling attributes of a process.\n"
+msgstr ""
+
+#: schedutils/chrt.c:137
#, fuzzy
msgid ""
-" -d, --device <device> select rtc device (rtc0|rtc1|...)\n"
-" -n, --dry-run does everything, but suspend\n"
-" -l, --local RTC uses local timezone\n"
-" -m, --mode <mode> standby|mem|... sleep mode\n"
-" -s, --seconds <seconds> seconds to sleep\n"
-" -t, --time <time_t> time to wake\n"
-" -u, --utc RTC uses UTC\n"
-" -v, --verbose verbose messages\n"
-msgstr ""
-"用法：%s [選項]\n"
-" -d | --device <device> 選取 rtc 裝置 (rtc0|rtc1|...)\n"
-" -n | --dry-run 全部執行，但是懸置\n"
-" -l | --local RTC 使用本地時區\n"
-" -m | --mode standby|mem|... 暫停模式\n"
-" -s | --seconds <seconds> 幾秒後暫停\n"
-" -t | --time <time_t> 喚醒的時間\n"
-" -u | --utc RTC 使用 UTC\n"
-" -v | --verbose 詳細的訊息\n"
-" -V | --version 顯示版本\n"
-
-#: sys-utils/rtcwake.c:154
+"Set policy:\n"
+" chrt [options] <priority> <command> [<arg>...]\n"
+" chrt [options] --pid <priority> <pid>\n"
+msgstr ""
+"\n"
+" chrt - 操控行程的即時屬性\n"
+"\n"
+"設定策略：\n"
+" chrt [選項] <policy> <priority> {<pid> |<command> [<arg>...]}\n"
+"\n"
+"取得策略：\n"
+" chrt [選項] {<pid> | <command> [<arg>...]}\n"
+
+#: schedutils/chrt.c:141
+msgid ""
+"Get policy:\n"
+" chrt [options] -p <pid>\n"
+msgstr ""
+
+#: schedutils/chrt.c:145
#, fuzzy
-msgid "read rtc time failed"
-msgstr "è®\80å\8f\96 rtc æ\99\82é\96\93"
+msgid "Policy options:\n"
+msgstr "è³\87æº\90é\81¸é \85ï¼\9a\n"
-#: sys-utils/rtcwake.c:159
+#: schedutils/chrt.c:146
#, fuzzy
-msgid "read system time failed"
-msgstr "讀取系統時間"
+msgid " -b, --batch set policy to SCHED_BATCH\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/rtcwake.c:177
+#: schedutils/chrt.c:147
#, fuzzy
-msgid "convert rtc time failed"
-msgstr "轉換 rtc 時間"
+msgid " -d, --deadline set policy to SCHED_DEADLINE\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/rtcwake.c:237
+#: schedutils/chrt.c:148
#, fuzzy
-msgid "set rtc alarm failed"
-msgstr "設定 rtc 警示"
+msgid " -f, --fifo set policy to SCHED_FIFO\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/rtcwake.c:241
+#: schedutils/chrt.c:149
#, fuzzy
-msgid "enable rtc alarm failed"
-msgstr "啟用 rtc 警示"
+msgid " -i, --idle set policy to SCHED_IDLE\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/rtcwake.c:245
+#: schedutils/chrt.c:150
#, fuzzy
-msgid "set rtc wake alarm failed"
-msgstr "設定 rtc 喚醒警示"
+msgid " -o, --other set policy to SCHED_OTHER\n"
+msgstr " -o, --oddparity 設定同位到奇數\n"
-#: sys-utils/rtcwake.c:347
+#: schedutils/chrt.c:151
#, fuzzy
-msgid "read rtc alarm failed"
-msgstr "啟用 rtc 警示"
+msgid " -r, --rr set policy to SCHED_RR (default)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/rtcwake.c:353
-#, c-format
-msgid "alarm: off\n"
-msgstr ""
+#: schedutils/chrt.c:154
+#, fuzzy
+msgid "Scheduling options:\n"
+msgstr "輸出格式：\n"
-#: sys-utils/rtcwake.c:370
+#: schedutils/chrt.c:155
#, fuzzy
-msgid "convert time failed"
-msgstr "轉換 rtc 時間"
+msgid " -R, --reset-on-fork set SCHED_RESET_ON_FORK for FIFO or RR\n"
+msgstr ""
+"\n"
+"排程旗標：\n"
+" -R | --reset-on-fork 設定 SCHED_RESET_ON_FORK 用於 FIFO 或 RR\n"
-#: sys-utils/rtcwake.c:377
-#, c-format
-msgid "alarm: on %s"
+#: schedutils/chrt.c:156
+msgid " -T, --sched-runtime <ns> runtime parameter for DEADLINE\n"
msgstr ""
-#: sys-utils/rtcwake.c:433
-#, fuzzy, c-format
-msgid "unrecognized suspend state '%s'"
-msgstr "%s：無法辨識的懸置狀態「%s」\n"
+#: schedutils/chrt.c:157
+msgid " -P, --sched-period <ns> period parameter for DEADLINE\n"
+msgstr ""
+
+#: schedutils/chrt.c:158
+msgid " -D, --sched-deadline <ns> deadline parameter for DEADLINE\n"
+msgstr ""
-#: sys-utils/rtcwake.c:444
+#: schedutils/chrt.c:161
#, fuzzy
-msgid "failed to parse seconds value"
-msgstr "剖析 %s %s 時失敗"
+msgid "Other options:\n"
+msgstr "輸出格式：\n"
-#: sys-utils/rtcwake.c:452
+#: schedutils/chrt.c:162
+msgid " -a, --all-tasks operate on all the tasks (threads) for a given pid\n"
+msgstr ""
+
+#: schedutils/chrt.c:163
#, fuzzy
-msgid "failed to parse time_t value"
-msgstr "剖析 pid 時失敗"
+msgid " -m, --max show min and max valid priorities\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/rtcwake.c:476
-#, c-format
-msgid "%s: assuming RTC uses UTC ...\n"
-msgstr "%s：假設 RTC 使用 UTC ...\n"
+#: schedutils/chrt.c:164
+#, fuzzy
+msgid " -p, --pid operate on existing given pid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: schedutils/chrt.c:165
+#, fuzzy
+msgid " -v, --verbose display status information\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/rtcwake.c:482
+#: schedutils/chrt.c:231 schedutils/chrt.c:253
#, c-format
-msgid "Using UTC time.\n"
-msgstr "使用 UTC 時間。\n"
+msgid "failed to get pid %d's policy"
+msgstr "取得 pid %d 的策略時失敗"
-#: sys-utils/rtcwake.c:483
+#: schedutils/chrt.c:256
#, c-format
-msgid "Using local time.\n"
-msgstr "使用當地時間。\n"
+msgid "failed to get pid %d's attributes"
+msgstr "取得 pid %d 的屬性時失敗"
-#: sys-utils/rtcwake.c:488
-#, fuzzy
-msgid "must provide wake time (see -t and -s options)"
-msgstr "%s：必須提供喚醒時間\n"
+#: schedutils/chrt.c:266
+#, fuzzy, c-format
+msgid "pid %d's new scheduling policy: %s"
+msgstr "pid %d 新的排程策略："
-#: sys-utils/rtcwake.c:505
+#: schedutils/chrt.c:268
#, fuzzy, c-format
-msgid "%s not enabled for wakeup events"
-msgstr "%s: %s 未啟用喚醒事件\n"
+msgid "pid %d's current scheduling policy: %s"
+msgstr "pid %d 目前的排程策略："
-#: sys-utils/rtcwake.c:520
+#: schedutils/chrt.c:275
#, c-format
-msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
-msgstr "警示 %ld，系統時間 %ld，rtc 時間 %ld，秒數 %u\n"
+msgid "pid %d's new scheduling priority: %d\n"
+msgstr "pid %d 新的排程優先權：%d\n"
+
+#: schedutils/chrt.c:277
+#, c-format
+msgid "pid %d's current scheduling priority: %d\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
-#: sys-utils/rtcwake.c:526
+#: schedutils/chrt.c:282
#, c-format
-msgid "suspend to \"%s\" unavailable"
+msgid "pid %d's new runtime/deadline/period parameters: %ju/%ju/%ju\n"
msgstr ""
-#: sys-utils/rtcwake.c:534
+#: schedutils/chrt.c:285
#, fuzzy, c-format
-msgid "time doesn't go backward to %s"
-msgstr "%s：時間無法後退到 %s\n"
+msgid "pid %d's current runtime/deadline/period parameters: %ju/%ju/%ju\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
-#: sys-utils/rtcwake.c:544
+#: schedutils/chrt.c:299 schedutils/chrt.c:395
+#, fuzzy
+msgid "cannot obtain the list of tasks"
+msgstr "無法得到事務清單的"
+
+#: schedutils/chrt.c:333
#, fuzzy, c-format
-msgid "%s: wakeup using %s at %s"
-msgstr "%1$s：使用 %3$s 於 %4$s 自「%2$s」喚醒\n"
+msgid "%s min/max priority\t: %d/%d\n"
+msgstr "SCHED_%s 最小/最大優先權\t：%d/%d\n"
-#: sys-utils/rtcwake.c:548
+#: schedutils/chrt.c:336
#, fuzzy, c-format
-msgid "%s: wakeup from \"%s\" using %s at %s"
-msgstr "%1$s：使用 %3$s 於 %4$s 自「%2$s」喚醒\n"
+msgid "%s not supported?\n"
+msgstr "SCHED_%s 不被支援？\n"
-#: sys-utils/rtcwake.c:557
-#, c-format
-msgid "suspend mode: no; leaving\n"
-msgstr "懸置模式：無；離開\n"
+#: schedutils/chrt.c:399
+#, fuzzy, c-format
+msgid "failed to set tid %d's policy"
+msgstr "設定 tid %d's 策略時失敗"
-#: sys-utils/rtcwake.c:565
+#: schedutils/chrt.c:404
#, c-format
-msgid "suspend mode: off; executing %s\n"
-msgstr "懸置模式：關閉；執行 %s\n"
+msgid "failed to set pid %d's policy"
+msgstr "設定 pid %d 的策略時失敗"
-#: sys-utils/rtcwake.c:575
-#, fuzzy, c-format
-msgid "unable to execute %s"
-msgstr "執行 %s 時失敗"
+#: schedutils/chrt.c:484
+#, fuzzy
+msgid "invalid runtime argument"
+msgstr "無效的時間引數"
-#: sys-utils/rtcwake.c:583
-#, c-format
-msgid "suspend mode: on; reading rtc\n"
-msgstr "懸置模式：開啟；讀取 rtc\n"
+#: schedutils/chrt.c:487
+#, fuzzy
+msgid "invalid period argument"
+msgstr "無效的速度引數"
-#: sys-utils/rtcwake.c:589
+#: schedutils/chrt.c:490
#, fuzzy
-msgid "rtc read failed"
-msgstr "讀取失敗：%s"
+msgid "invalid deadline argument"
+msgstr "無效的前端引數"
-#: sys-utils/rtcwake.c:600
-#, c-format
-msgid "suspend mode: disable; disabling alarm\n"
-msgstr "懸置模式：停用；停用警示\n"
+#: schedutils/chrt.c:515
+#, fuzzy
+msgid "invalid priority argument"
+msgstr "無效的優先權引數"
-#: sys-utils/rtcwake.c:604
-#, fuzzy, c-format
-msgid "suspend mode: show; printing alarm info\n"
-msgstr "懸置模式：停用；停用警示\n"
+#: schedutils/chrt.c:519
+#, fuzzy
+msgid "--reset-on-fork option is supported for SCHED_FIFO and SCHED_RR policies only"
+msgstr "SCHED_RESET_ON_FORK 旗標只被支援用於 SCHED_FIFO 和 SCHED_RR 策略"
-#: sys-utils/rtcwake.c:611
-#, c-format
-msgid "suspend mode: %s; suspending system\n"
-msgstr "懸置模式：%s；懸置系統\n"
+#: schedutils/chrt.c:524
+msgid "--sched-{runtime,deadline,period} options are supported for SCHED_DEADLINE only"
+msgstr ""
-#: sys-utils/rtcwake.c:617
+#: schedutils/chrt.c:539
#, fuzzy
-msgid "disable rtc alarm interrupt failed"
-msgstr "停用 rtc 警示插斷"
+msgid "SCHED_DEADLINE is unsupported"
+msgstr "SCHED_%s 不被支援？\n"
-#: sys-utils/setarch.c:51
+#: schedutils/chrt.c:546
#, c-format
-msgid "Switching on %s.\n"
-msgstr "切換於 %s。\n"
-
-#: sys-utils/setarch.c:93
-#, fuzzy, c-format
-msgid " %s%s [options] [program [program arguments]]\n"
+msgid "unsupported priority value for the policy: %d: see --max for valid range"
msgstr ""
-"用法：%s%s [選項] [程式 [程式引數]]\n"
-"\n"
-"選項：\n"
-#: sys-utils/setarch.c:99
+#: schedutils/ionice.c:76
+msgid "ioprio_get failed"
+msgstr "ioprio_get 失敗"
+
+#: schedutils/ionice.c:85
#, fuzzy, c-format
-msgid ""
-" -v, --verbose says what options are being switched on\n"
-" -R, --addr-no-randomize disables randomization of the virtual address "
-"space\n"
-" -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
-" -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
-" -L, --addr-compat-layout changes the way virtual memory is allocated\n"
-" -X, --read-implies-exec turns on READ_IMPLIES_EXEC\n"
-" -B, --32bit turns on ADDR_LIMIT_32BIT\n"
-" -I, --short-inode turns on SHORT_INODE\n"
-" -S, --whole-seconds turns on WHOLE_SECONDS\n"
-" -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
-" -3, --3gb limits the used address space to a maximum of 3 "
-"GB\n"
-" --4gb ignored (for backward compatibility only)\n"
-" --uname-2.6 turns on UNAME26\n"
-msgstr ""
-" -h, --help 顯示這個說明文字\n"
-" -v, --verbose 顯示什麼選項正在被切換開啟\n"
-" -R, --addr-no-randomize 停用虛擬位址空間的亂數啟始\n"
-" -F, --fdpic-funcptrs 將函式指標指到描述元\n"
-" -Z, --mmap-page-zero 打開 MMAP_PAGE_ZERO\n"
-" -L, --addr-compat-layout 變更虛擬記憶體被配置的方式\n"
-" -X, --read-implies-exec 打開 READ_IMPLIES_EXEC\n"
-" -B, --32bit 打開 ADDR_LIMIT_32BIT\n"
-" -I, --short-inode 打開 SHORT_INODE\n"
-" -S, --whole-seconds 打開 WHOLE_SECONDS\n"
-" -T, --sticky-timeouts 打開 STICKY_TIMEOUTS\n"
-" -3, --3 gb 限制已用的位址空間最大值為 3 GB\n"
-" --4 gb 已忽略 (只用於向後相容性)\n"
-
-#: sys-utils/setarch.c:124
+msgid "%s: prio %lu\n"
+msgstr "%s：選項 "
+
+#: schedutils/ionice.c:98
+msgid "ioprio_set failed"
+msgstr "ioprio_set 失敗"
+
+#: schedutils/ionice.c:105
#, fuzzy, c-format
msgid ""
-"%s\n"
-"Try `%s --help' for more information."
+" %1$s [options] -p <pid>...\n"
+" %1$s [options] -P <pgid>...\n"
+" %1$s [options] -u <uid>...\n"
+" %1$s [options] <command>\n"
msgstr ""
-"%s: %s\n"
-"嘗試「%s --help」以獲得更多資訊。\n"
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
-#: sys-utils/setarch.c:201 sys-utils/setarch.c:216
-#, c-format
-msgid "%s: Unrecognized architecture"
-msgstr "%s：無法辨識的架構"
+#: schedutils/ionice.c:111
+msgid "Show or change the I/O-scheduling class and priority of a process.\n"
+msgstr ""
-#: sys-utils/setarch.c:256 sys-utils/setarch.c:263
-msgid "Not enough arguments"
-msgstr "引數不足"
+#: schedutils/ionice.c:114
+msgid ""
+" -c, --class <class> name or number of scheduling class,\n"
+" 0: none, 1: realtime, 2: best-effort, 3: idle\n"
+msgstr ""
-#: sys-utils/setarch.c:274 sys-utils/setarch.c:333
-#, c-format
-msgid "Failed to set personality to %s"
-msgstr "設定身分為 %s 時失敗"
+#: schedutils/ionice.c:116
+msgid ""
+" -n, --classdata <num> priority (0..7) in the specified scheduling class,\n"
+" only for the realtime and best-effort classes\n"
+msgstr ""
-#: sys-utils/setsid.c:25
-#, fuzzy, c-format
-msgid " %s [options] <program> [arguments ...]\n"
-msgstr "用法：%s [選項] <程式> [引數...]\n"
+#: schedutils/ionice.c:118
+msgid " -p, --pid <pid>... act on these already running processes\n"
+msgstr ""
-#: sys-utils/setsid.c:64
-#, fuzzy
-msgid "fork"
-msgstr "衍生：%s"
+#: schedutils/ionice.c:119
+msgid " -P, --pgid <pgrp>... act on already running processes in these groups\n"
+msgstr ""
-#: sys-utils/setsid.c:75
+#: schedutils/ionice.c:120
#, fuzzy
-msgid "setsid failed"
-msgstr "setuid() 失敗"
+msgid " -t, --ignore ignore failures\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: schedutils/ionice.c:121
+msgid " -u, --uid <uid>... act on already running processes owned by these users\n"
+msgstr ""
-#: sys-utils/setsid.c:78
+#: schedutils/ionice.c:157
#, fuzzy
-msgid "execvp failed"
-msgstr "execv 失敗"
+msgid "invalid class data argument"
+msgstr "無效的類別資料引數"
-#: sys-utils/swapon.c:104
+#: schedutils/ionice.c:163
#, fuzzy
-msgid ""
-"\n"
-"The <spec> parameter:\n"
-" -L <label> LABEL of device to be used\n"
-" -U <uuid> UUID of device to be used\n"
-" LABEL=<label> LABEL of device to be used\n"
-" UUID=<uuid> UUID of device to be used\n"
-" <device> name of device to be used\n"
-" <file> name of file to be used\n"
-"\n"
-msgstr ""
-"<special> 參數：\n"
-" {-L 標籤 | LABEL=標籤} 標籤的裝置為使用\n"
-" {-U uuid | UUID=uuid} UUID 的裝置為使用\n"
-" <device> 要使用的裝置名稱\n"
-" <file> 要使用的檔案名稱\n"
-"\n"
+msgid "invalid class argument"
+msgstr "無效的類別引數"
-#: sys-utils/swapon.c:115 sys-utils/swapon.c:136
+#: schedutils/ionice.c:168
#, fuzzy, c-format
-msgid " %s [options] [<spec>]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "unknown scheduling class: '%s'"
+msgstr "不明排程類別：『%s』"
-#: sys-utils/swapon.c:118
-msgid ""
-" -a, --all enable all swaps from /etc/fstab\n"
-" -d, --discard discard freed pages before they are reused\n"
-" -e, --ifexists silently skip devices that do not exis\n"
-" -f, --fixpgsz reinitialize the swap space if necessary\n"
-" -h, --help display help and exit\n"
-" -p, --priority <prio> specify the priority of the swap device.\n"
-" -s, --summary display summary about used swap devices and exit\n"
-" -v, --verbose verbose mode\n"
-" -V, --version display version and exit\n"
+#: schedutils/ionice.c:176 schedutils/ionice.c:184 schedutils/ionice.c:192
+msgid "can handle only one of pid, pgid or uid at once"
msgstr ""
-#: sys-utils/swapon.c:139
-msgid ""
-" -a, --all disable all swaps from /proc/swaps\n"
-" -h, --help display help and exit\n"
-" -v, --verbose verbose mode\n"
-" -V, --version display version and exit\n"
-msgstr ""
+#: schedutils/ionice.c:185
+#, fuzzy
+msgid "invalid PGID argument"
+msgstr "無效的 PID 引數"
-#: sys-utils/swapon.c:173
-#, c-format
-msgid "%s: unexpected file format"
-msgstr "%s：未預期的檔案格式"
+#: schedutils/ionice.c:193
+#, fuzzy
+msgid "invalid UID argument"
+msgstr "無效的 TID 引數"
-#: sys-utils/swapon.c:270
-#, c-format
-msgid "%s: reinitializing the swap."
-msgstr "%s：重新初始化交換區。"
-
-#: sys-utils/swapon.c:290
-msgid "execv failed"
-msgstr "execv 失敗"
+#: schedutils/ionice.c:212
+msgid "ignoring given class data for none class"
+msgstr "忽略給定的無類別資料"
-#: sys-utils/swapon.c:323
-#, c-format
-msgid "%s: lseek failed"
-msgstr "%s：lseek 失敗"
+#: schedutils/ionice.c:220
+msgid "ignoring given class data for idle class"
+msgstr "忽略給定的閒置類別資料"
-#: sys-utils/swapon.c:329
-#, c-format
-msgid "%s: write signature failed"
-msgstr "%s：寫入簽章時失敗"
+#: schedutils/ionice.c:225
+#, fuzzy, c-format
+msgid "unknown prio class %d"
+msgstr "不明 prio 類別 %d"
-#: sys-utils/swapon.c:415
+#: schedutils/taskset.c:52
#, c-format
-msgid "%s: found swap signature: version %d, page-size %d, %s byte order"
-msgstr "%s：找到交換區簽章：版本 %d，頁面大小 %d，%s 位元組序"
-
-#: sys-utils/swapon.c:420
-msgid "different"
-msgstr "不同"
-
-#: sys-utils/swapon.c:420
-msgid "same"
-msgstr "相同"
+msgid ""
+"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
+"\n"
+msgstr ""
+"用法：%s [選項] [遮罩| cpu-list] [pid|cmd [引數...]]\n"
+"\n"
-#: sys-utils/swapon.c:445
-#, c-format
-msgid "%s: insecure permissions %04o, %04o suggested."
-msgstr "%s：不安全的權限 %04o, 建議使用 %04o。"
+#: schedutils/taskset.c:56
+msgid "Show or change the CPU affinity of a process.\n"
+msgstr ""
-#: sys-utils/swapon.c:450
+#: schedutils/taskset.c:60
#, fuzzy, c-format
-msgid "%s: insecure file owner %d, 0 (root) suggested."
-msgstr "%s：不安全的權限 %04o, 建議使用 %04o。"
+msgid ""
+"Options:\n"
+" -a, --all-tasks operate on all the tasks (threads) for a given pid\n"
+" -p, --pid operate on existing given pid\n"
+" -c, --cpu-list display and specify cpus in list format\n"
+msgstr ""
+"選項：\n"
+" -a, --all-tasks 作用於所有事務 (執行緒) 用於給定的 pid\n"
+" -p, --pid 作用於現有給定的 pid\n"
+" -c, --cpu-list 顯示和指定 cpus 在中清單格式\n"
+" -h, --help 顯示這份說明\n"
+" -V, --version 輸出版本資訊\n"
+"\n"
-#: sys-utils/swapon.c:457
+#: schedutils/taskset.c:69
#, c-format
-msgid "%s: skipping - it appears to have holes."
-msgstr "%s：跳過 - 看來似乎有漏洞。"
+msgid ""
+"The default behavior is to run a new command:\n"
+" %1$s 03 sshd -b 1024\n"
+"You can retrieve the mask of an existing task:\n"
+" %1$s -p 700\n"
+"Or set it:\n"
+" %1$s -p 03 700\n"
+"List format uses a comma-separated list instead of a mask:\n"
+" %1$s -pc 0,3,7-11 700\n"
+"Ranges in list format can take a stride argument:\n"
+" e.g. 0-31:2 is equivalent to mask 0x55555555\n"
+msgstr ""
+"預設行為是執行新的命令：\n"
+" %1$s 03 sshd -b 1024\n"
+"您可以取回現有任務的遮罩：\n"
+" %1$s -p 700\n"
+"或設定它：\n"
+" %1$s -p 03 700\n"
+"清單格式使用以逗號分隔的清單以代替遮罩：\n"
+" %1$s -pc 0,3,7-11 700\n"
+"清單格式中的範圍可以加上一個跨越引數：\n"
+" 例如：0-31:2 相當於遮罩 0x55555555\n"
-#: sys-utils/swapon.c:471
+#: schedutils/taskset.c:91
#, c-format
-msgid "%s: get size failed"
-msgstr "%s：取得大小時失敗"
+msgid "pid %d's new affinity list: %s\n"
+msgstr "pid %d 新的近似者清單：%s\n"
-#: sys-utils/swapon.c:477
+#: schedutils/taskset.c:92
#, c-format
-msgid "%s: read swap header failed"
-msgstr "%s：讀取交換區頁首失敗"
+msgid "pid %d's current affinity list: %s\n"
+msgstr "pid %d 目前的近似者清單：%s\n"
-#: sys-utils/swapon.c:487
+#: schedutils/taskset.c:95
#, c-format
-msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
-msgstr "%s：pagesize=%d，swapsize=%llu，devsize=%llu"
+msgid "pid %d's new affinity mask: %s\n"
+msgstr "pid %d 新的近似者遮罩：%s\n"
-#: sys-utils/swapon.c:492
+#: schedutils/taskset.c:96
#, c-format
-msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
-msgstr "%s：last_page 0x%08llx 大於實際的交換區空間大小"
+msgid "pid %d's current affinity mask: %s\n"
+msgstr "pid %d 目前的近似者遮罩：%s\n"
-#: sys-utils/swapon.c:497
-#, c-format
-msgid "%s: swap format pagesize does not match."
-msgstr "%s：交換區格式頁面大小不吻合。"
+#: schedutils/taskset.c:100
+#, fuzzy
+msgid "internal error: conversion from cpuset to string failed"
+msgstr "轉換從 cpuset 到字串失敗"
-#: sys-utils/swapon.c:502
+#: schedutils/taskset.c:109
#, c-format
-msgid ""
-"%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
-msgstr "%s：交換區格式頁面大小不吻合。(使用 --fixpgsz 以重新初始它。)"
+msgid "failed to set pid %d's affinity"
+msgstr "設定 pid %d 的近似者時失敗"
-#: sys-utils/swapon.c:511
+#: schedutils/taskset.c:110
#, c-format
-msgid "%s: software suspend data detected. Rewriting the swap signature."
-msgstr "%s：偵測到軟體懸置資料。重新寫入交換區簽章。"
+msgid "failed to get pid %d's affinity"
+msgstr "取得 pid %d 的近似者時失敗"
-#: sys-utils/swapon.c:535 sys-utils/swapon.c:590
-#, c-format
-msgid "%s on %s\n"
-msgstr "%s 於 %s\n"
+#: schedutils/taskset.c:194 sys-utils/chcpu.c:300
+msgid "cannot determine NR_CPUS; aborting"
+msgstr "無法決定 NR_CPUS；放棄"
-#: sys-utils/swapon.c:560
-#, c-format
-msgid "%s: swapon failed"
-msgstr "%s：swapon 失敗"
+#: schedutils/taskset.c:203 schedutils/taskset.c:216 sys-utils/chcpu.c:307
+msgid "cpuset_alloc failed"
+msgstr "cpuset_alloc 失敗"
-#: sys-utils/swapon.c:567
-#, c-format
-msgid "cannot find the device for %s"
-msgstr "找不到做為 %s 的裝置"
+#: schedutils/taskset.c:223 sys-utils/chcpu.c:234
+#, fuzzy, c-format
+msgid "failed to parse CPU list: %s"
+msgstr "剖析 CPU 清單時失敗：%s"
-#: sys-utils/swapon.c:602
-msgid "Not superuser."
-msgstr "並非系統管理者。"
+#: schedutils/taskset.c:226
+#, fuzzy, c-format
+msgid "failed to parse CPU mask: %s"
+msgstr "剖析 CPU 遮罩時失敗：%s"
-#: sys-utils/swapon.c:605
+#: sys-utils/blkdiscard.c:69
#, c-format
-msgid "%s: swapoff failed"
-msgstr "%s：swapoff 失敗"
+msgid "%s: Zero-filled %<PRIu64> bytes from the offset %<PRIu64>\n"
+msgstr ""
-#: sys-utils/swapon.c:876
+#: sys-utils/blkdiscard.c:74
#, c-format
-msgid "'%s' is unsupported program name (must be 'swapon' or 'swapoff')."
-msgstr "「%s」為不受支援的程式名稱 (必須是「swapon」或「swapoff」)。"
+msgid "%s: Discarded %<PRIu64> bytes from the offset %<PRIu64>\n"
+msgstr ""
-#: sys-utils/switch_root.c:56
+#: sys-utils/blkdiscard.c:88
+msgid "Discard the content of sectors on a device.\n"
+msgstr ""
+
+#: sys-utils/blkdiscard.c:91
#, fuzzy
-msgid "failed to open directory"
-msgstr "%s：開啟失敗：%s\n"
+msgid " -o, --offset <num> offset in bytes to discard from\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/switch_root.c:64
+#: sys-utils/blkdiscard.c:92
#, fuzzy
-msgid "failed to stat directory"
-msgstr "顯示狀態時失敗：%s"
+msgid " -l, --length <num> length of bytes to discard from the offset\n"
+msgstr "剖析列號的時失敗"
-#: sys-utils/switch_root.c:74
+#: sys-utils/blkdiscard.c:93
#, fuzzy
-msgid "failed to read directory"
-msgstr "%s：並非目錄"
+msgid " -p, --step <num> size of the discard iterations within the offset\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/switch_root.c:87
-#, fuzzy, c-format
-msgid "failed to stat %s"
-msgstr "顯示狀態時失敗：%s"
+#: sys-utils/blkdiscard.c:94
+#, fuzzy
+msgid " -s, --secure perform secure discard\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+
+#: sys-utils/blkdiscard.c:95
+#, fuzzy
+msgid " -z, --zeroout zero-fill rather than discard\n"
+msgstr " -n --nonblock 失敗而非等待\n"
+
+#: sys-utils/blkdiscard.c:96
+#, fuzzy
+msgid " -v, --verbose print aligned length and offset\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/switch_root.c:106
+#: sys-utils/blkdiscard.c:144 sys-utils/fstrim.c:450 sys-utils/losetup.c:706
+#: text-utils/hexdump.c:124
+#, fuzzy
+msgid "failed to parse offset"
+msgstr "剖析偏移時失敗"
+
+#: sys-utils/blkdiscard.c:148
+#, fuzzy
+msgid "failed to parse step"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/blkdiscard.c:175 sys-utils/blkzone.c:406 sys-utils/fallocate.c:376
+#: sys-utils/fsfreeze.c:110 sys-utils/fstrim.c:478 sys-utils/umount.c:586
+msgid "unexpected number of arguments"
+msgstr "未預期的引數數量"
+
+#: sys-utils/blkdiscard.c:189
#, fuzzy, c-format
-msgid "failed to unlink %s"
-msgstr "%s：開啟失敗：%s\n"
+msgid "%s: BLKGETSIZE64 ioctl failed"
+msgstr "BLKGETSIZE ioctl 失敗的於 %s"
-#: sys-utils/switch_root.c:127
+#: sys-utils/blkdiscard.c:191 sys-utils/blkzone.c:107
#, fuzzy, c-format
-msgid "failed to stat directory %s"
-msgstr "顯示狀態時失敗：%s"
+msgid "%s: BLKSSZGET ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
+
+#: sys-utils/blkdiscard.c:195
+#, c-format
+msgid "%s: offset %<PRIu64> is not aligned to sector size %i"
+msgstr ""
-#: sys-utils/switch_root.c:143
+#: sys-utils/blkdiscard.c:200 sys-utils/blkzone.c:270
#, fuzzy, c-format
-msgid "failed to mount moving %s to %s"
-msgstr "剖析 %s %s 時失敗"
+msgid "%s: offset is greater than device size"
+msgstr "無法提取裝置大小"
+
+#: sys-utils/blkdiscard.c:209
+#, c-format
+msgid "%s: length %<PRIu64> is not aligned to sector size %i"
+msgstr ""
-#: sys-utils/switch_root.c:145
+#: sys-utils/blkdiscard.c:222
#, fuzzy, c-format
-msgid "forcing unmount of %s"
-msgstr "嘗試卸載 %s\n"
+msgid "%s: BLKZEROOUT ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#: sys-utils/switch_root.c:151
+#: sys-utils/blkdiscard.c:226
#, fuzzy, c-format
-msgid "failed to change directory to %s"
-msgstr "設定身分為 %s 時失敗"
+msgid "%s: BLKSECDISCARD ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#: sys-utils/switch_root.c:159
+#: sys-utils/blkdiscard.c:230
#, fuzzy, c-format
-msgid "failed to mount moving %s to /"
-msgstr "%s：開啟失敗：%s\n"
+msgid "%s: BLKDISCARD ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#: sys-utils/switch_root.c:165
+#: sys-utils/blkzone.c:73
#, fuzzy
-msgid "failed to change root"
-msgstr "剖析優先權時失敗"
+msgid "Report zone information about the given device"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/switch_root.c:184
-#, fuzzy, c-format
-msgid " %s [options] <newrootdir> <init> <args to init>\n"
+#: sys-utils/blkzone.c:74
+msgid "Reset a range of zones."
msgstr ""
-"用法：%s [選項] <掛載點>\n"
-"\n"
-"選項：\n"
-#: sys-utils/switch_root.c:215
-#, fuzzy
-msgid "failed. Sorry."
-msgstr "%s 失敗。\n"
+#: sys-utils/blkzone.c:104
+#, fuzzy, c-format
+msgid "%s: blkdev_get_sectors ioctl failed"
+msgstr "%s：變更目錄失敗"
-#: sys-utils/switch_root.c:218
+#: sys-utils/blkzone.c:184
#, fuzzy, c-format
-msgid "cannot access %s"
-msgstr "無法開啟檔案 '%s'"
+msgid "%s: offset is greater than or equal to device size"
+msgstr "無法提取裝置大小"
-#: sys-utils/tunelp.c:83
-msgid " -i, --irq <num> specify parallel port irq\n"
-msgstr ""
+#: sys-utils/blkzone.c:188 sys-utils/blkzone.c:260
+#, fuzzy, c-format
+msgid "%s: unable to determine zone size"
+msgstr "%s：無法寫入區映射"
-#: sys-utils/tunelp.c:84
-msgid " -t, --time <ms> driver wait time in milliseconds\n"
-msgstr ""
+#: sys-utils/blkzone.c:206
+#, fuzzy, c-format
+msgid "%s: BLKREPORTZONE ioctl failed"
+msgstr "BLKGETSIZE ioctl 失敗的於 %s"
-#: sys-utils/tunelp.c:85
-msgid ""
-" -c, --chars <num> number of output characters before sleep\n"
+#: sys-utils/blkzone.c:209
+#, c-format
+msgid "Found %d zones from 0x%<PRIx64>\n"
msgstr ""
-#: sys-utils/tunelp.c:86
-msgid " -w, --wait <us> strobe wait in micro seconds\n"
+#: sys-utils/blkzone.c:228
+#, c-format
+msgid " start: 0x%09<PRIx64>, len 0x%06<PRIx64>, wptr 0x%06<PRIx64> reset:%u non-seq:%u, zcond:%2u(%s) [type: %u(%s)]\n"
msgstr ""
-#. TRANSLATORS: do not translate <on|off> arguments. The
-#. argument reader does not recognize locale, unless `on' is
-#. exactly that very same string.
-#: sys-utils/tunelp.c:90
-msgid " -a, --abort <on|off> abort on error\n"
+#: sys-utils/blkzone.c:265
+#, c-format
+msgid "%s: offset %<PRIu64> is not aligned to zone size %lu"
msgstr ""
-#: sys-utils/tunelp.c:91
-msgid " -o, --check-status <on|off> check printer status before printing\n"
+#: sys-utils/blkzone.c:284
+#, c-format
+msgid "%s: number of sectors %<PRIu64> is not aligned to zone size %lu"
msgstr ""
-#: sys-utils/tunelp.c:92
-msgid " -C, --careful <on|off> extra checking to status check\n"
-msgstr ""
+#: sys-utils/blkzone.c:292
+#, fuzzy, c-format
+msgid "%s: BLKRESETZONE ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#: sys-utils/tunelp.c:93
-#, fuzzy
-msgid " -s, --status query printer status\n"
-msgstr " -u, --unqote 輸出不加上引號\n"
+#: sys-utils/blkzone.c:294
+#, fuzzy, c-format
+msgid "%s: successfully reset in range from %<PRIu64>, to %<PRIu64>"
+msgstr "變更根從『%s』到『%s 時失敗』"
+
+#: sys-utils/blkzone.c:308
+#, fuzzy, c-format
+msgid " %s <command> [options] <device>\n"
+msgstr " %s [選項] <device>\n"
-#: sys-utils/tunelp.c:94
-msgid " -T, --trust-irq <on|off> make driver to trust irq\n"
+#: sys-utils/blkzone.c:311
+msgid "Run zone command on the given block device.\n"
msgstr ""
-#: sys-utils/tunelp.c:95
+#: sys-utils/blkzone.c:318
#, fuzzy
-msgid " -r, --reset reset the port\n"
-msgstr " -u, --unqote 輸出不加上引號\n"
+msgid " -o, --offset <sector> start sector of zone to act (in 512-byte sectors)\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/tunelp.c:96
-msgid " -q, --print-irq <on|off> display current irq setting\n"
+#: sys-utils/blkzone.c:319
+msgid " -l, --length <sectors> maximum sectors to act (in 512-byte sectors)\n"
msgstr ""
-#: sys-utils/tunelp.c:109
+#: sys-utils/blkzone.c:320
+#, fuzzy
+msgid " -c, --count <number> maximum number of zones\n"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/blkzone.c:321
#, fuzzy
-msgid "bad value"
-msgstr "不當的逾時設定值：%s"
+msgid " -v, --verbose display more details\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/tunelp.c:269
+#: sys-utils/blkzone.c:363
#, fuzzy, c-format
-msgid "%s not an lp device"
-msgstr "%s: %s 不是 lp 裝置。\n"
+msgid "%s is not valid command name"
+msgstr "%s 並非有效區塊裝置"
-#: sys-utils/tunelp.c:289
-msgid "LPGETSTATUS error"
-msgstr "LPGETSTATUS 錯誤"
+#: sys-utils/blkzone.c:375
+#, fuzzy
+msgid "failed to parse number of zones"
+msgstr "剖析列號的時失敗"
-#: sys-utils/tunelp.c:294
-#, c-format
-msgid "%s status is %d"
-msgstr "%s 狀態為 %d"
+#: sys-utils/blkzone.c:379
+#, fuzzy
+msgid "failed to parse number of sectors"
+msgstr "剖析列號的時失敗"
-#: sys-utils/tunelp.c:296
-#, c-format
-msgid ", busy"
-msgstr "，忙碌中"
+#: sys-utils/blkzone.c:383
+#, fuzzy
+msgid "failed to parse zone offset"
+msgstr "剖析偏移時失敗"
-#: sys-utils/tunelp.c:298
-#, c-format
-msgid ", ready"
-msgstr "，就緒"
+#: sys-utils/blkzone.c:399 sys-utils/setsid.c:92
+#, fuzzy
+msgid "no command specified"
+msgstr "未指定任何動作"
-#: sys-utils/tunelp.c:300
-#, c-format
-msgid ", out of paper"
-msgstr "，紙張耗盡"
+#: sys-utils/chcpu.c:84 sys-utils/chcpu.c:181
+#, fuzzy, c-format
+msgid "CPU %u does not exist"
+msgstr "CPU %d 不存在\n"
-#: sys-utils/tunelp.c:302
-#, c-format
-msgid ", on-line"
-msgstr "，上線"
+#: sys-utils/chcpu.c:89
+#, fuzzy, c-format
+msgid "CPU %u is not hot pluggable"
+msgstr "CPU %d 不是熱門 pluggable\n"
-#: sys-utils/tunelp.c:304
-#, c-format
-msgid ", error"
-msgstr "，錯誤"
+#: sys-utils/chcpu.c:96
+#, fuzzy, c-format
+msgid "CPU %u is already enabled\n"
+msgstr "CPU %d 已經已啟用\n"
-#: sys-utils/tunelp.c:310
-#, fuzzy
-msgid "ioctl failed"
-msgstr "msgctl 失敗"
+#: sys-utils/chcpu.c:100
+#, fuzzy, c-format
+msgid "CPU %u is already disabled\n"
+msgstr "CPU %d 已經已停用\n"
-#: sys-utils/tunelp.c:320
-msgid "LPGETIRQ error"
-msgstr "LPGETIRQ 錯誤"
+#: sys-utils/chcpu.c:108
+#, fuzzy, c-format
+msgid "CPU %u enable failed (CPU is deconfigured)"
+msgstr "CPU %d 啟用失敗 (CPU 被 deconfigured)\n"
-#: sys-utils/tunelp.c:325
-#, c-format
-msgid "%s using IRQ %d\n"
-msgstr "%s 正在使用 IRQ %d\n"
+#: sys-utils/chcpu.c:111
+#, fuzzy, c-format
+msgid "CPU %u enable failed"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: sys-utils/tunelp.c:327
-#, c-format
-msgid "%s using polling\n"
-msgstr "%s 正在使用輪詢\n"
+#: sys-utils/chcpu.c:114
+#, fuzzy, c-format
+msgid "CPU %u enabled\n"
+msgstr "CPU %d 已啟用\n"
-#: sys-utils/umount.c:72
+#: sys-utils/chcpu.c:117
#, fuzzy, c-format
-msgid ""
-" %1$s [-hV]\n"
-" %1$s -a [options]\n"
-" %1$s [options] <source> | <directory>\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %1$s [選項]\n"
-" %1$s [選項] <裝置> |<掛載點>\n"
-" %1$s [選項] <裝置> <掛載點>\n"
-" %1$s [選項] [--source <裝置>] [--target <掛載點>]\n"
+msgid "CPU %u disable failed (last enabled CPU)"
+msgstr "CPU %d 停用失敗 (最後一筆已啟用 CPU)\n"
-#: sys-utils/umount.c:79
-#, c-format
-msgid ""
-" -a, --all umount all filesystems\n"
-" -c, --no-canonicalize don't canonicalize paths\n"
-" -d, --detach-loop if mounted loop device, also free this loop device\n"
-" --fake dry run; skip the umount(2) syscall\n"
-" -f, --force force unmount (in case of an unreachable NFS "
-"system)\n"
-msgstr ""
+#: sys-utils/chcpu.c:123
+#, fuzzy, c-format
+msgid "CPU %u disable failed"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: sys-utils/umount.c:85
-#, c-format
-msgid ""
-" -i, --internal-only don't call the umount.<type> helpers\n"
-" -n, --no-mtab don't write to /etc/mtab\n"
-" -l, --lazy detach the filesystem now, and cleanup all later\n"
-msgstr ""
+#: sys-utils/chcpu.c:126
+#, fuzzy, c-format
+msgid "CPU %u disabled\n"
+msgstr "CPU %d 已停用\n"
-#: sys-utils/umount.c:89
-#, c-format
-msgid ""
-" -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
-" -r, --read-only In case unmounting fails, try to remount read-only\n"
-" -t, --types <list> limit the set of filesystem types\n"
-" -v, --verbose say what is being done\n"
-msgstr ""
+#: sys-utils/chcpu.c:139
+#, fuzzy
+msgid "This system does not support rescanning of CPUs"
+msgstr "這個系統不支援重新掃描的 CPUs"
+
+#: sys-utils/chcpu.c:142
+#, fuzzy
+msgid "Failed to trigger rescan of CPUs"
+msgstr "觸發重新掃描的 CPUs 時失敗"
-#: sys-utils/umount.c:178
+#: sys-utils/chcpu.c:144
#, fuzzy, c-format
-msgid "%s: umount failed"
-msgstr "掛載失敗"
+msgid "Triggered rescan of CPUs\n"
+msgstr "觸發的重新掃描的 CPUs\n"
-#: sys-utils/umount.c:187
+#: sys-utils/chcpu.c:151
+#, fuzzy
+msgid "This system does not support setting the dispatching mode of CPUs"
+msgstr "這個系統不支援設定派送模式的 CPUs"
+
+#: sys-utils/chcpu.c:155
+#, fuzzy
+msgid "Failed to set horizontal dispatch mode"
+msgstr "設定水平派送模式時失敗"
+
+#: sys-utils/chcpu.c:157
#, fuzzy, c-format
-msgid "%s: filesystem umounted, but mount(8) failed"
-msgstr "mount：掛載時失敗"
+msgid "Successfully set horizontal dispatching mode\n"
+msgstr "成功設定水平派送模式\n"
+
+#: sys-utils/chcpu.c:160
+#, fuzzy
+msgid "Failed to set vertical dispatch mode"
+msgstr "設定垂直派送模式時失敗"
-#: sys-utils/umount.c:201
+#: sys-utils/chcpu.c:162
#, fuzzy, c-format
-msgid "%s: invalid block device"
-msgstr "umount：%s: 無效的區塊裝置"
+msgid "Successfully set vertical dispatching mode\n"
+msgstr "成功設定垂直派送模式\n"
-#: sys-utils/umount.c:204
+#: sys-utils/chcpu.c:186
#, fuzzy, c-format
-msgid "%s: not mounted"
-msgstr "fsck：%s：找不到\n"
+msgid "CPU %u is not configurable"
+msgstr "CPU %d 不是可組配的\n"
-#: sys-utils/umount.c:207
+#: sys-utils/chcpu.c:192
#, fuzzy, c-format
-msgid "%s: can't write superblock"
-msgstr "mount：%s: 無法讀取超區塊"
+msgid "CPU %u is already configured\n"
+msgstr "CPU %d 已經已組配\n"
-#: sys-utils/umount.c:210
+#: sys-utils/chcpu.c:196
#, fuzzy, c-format
-msgid ""
-"%s: target is busy.\n"
-" (In some cases useful info about processes that use\n"
-" the device is found by lsof(8) or fuser(1))"
-msgstr ""
-"umount：%s：裝置忙碌中。\n"
-" (在某些情況下關於使用該裝置之進程的\n"
-" 有用資訊，可以藉由 lsof(8) 或 fuser(1) 找到)"
+msgid "CPU %u is already deconfigured\n"
+msgstr "CPU %d 已經 deconfigured\n"
-#: sys-utils/umount.c:219
+#: sys-utils/chcpu.c:201
#, fuzzy, c-format
-msgid "%s: must be superuser to umount"
-msgstr "umount：%s: 必須是系統管理者才能 umount"
+msgid "CPU %u deconfigure failed (CPU is enabled)"
+msgstr "CPU %d deconfigure 失敗 (CPU 已啟用)\n"
-#: sys-utils/umount.c:222
+#: sys-utils/chcpu.c:208
#, fuzzy, c-format
-msgid "%s: block devices not permitted on fs"
-msgstr "umount：%s: 區塊裝置在檔案系統中不被允許"
+msgid "CPU %u configure failed"
+msgstr "CPU %d 組配失敗 (%m)\n"
-#: sys-utils/umount.c:271
-#, fuzzy
-msgid "failed to set umount target"
-msgstr "剖析 pid 時失敗"
+#: sys-utils/chcpu.c:211
+#, fuzzy, c-format
+msgid "CPU %u configured\n"
+msgstr "CPU %d 已組配\n"
-#: sys-utils/unshare.c:59
+#: sys-utils/chcpu.c:215
#, fuzzy, c-format
-msgid " %s [options] <program> [args...]\n"
-msgstr "用法：%s [選項] <程式> [引數...]\n"
+msgid "CPU %u deconfigure failed"
+msgstr "CPU %d deconfigure 失敗 (%m)\n"
-#: sys-utils/unshare.c:62
-#, fuzzy
+#: sys-utils/chcpu.c:218
+#, fuzzy, c-format
+msgid "CPU %u deconfigured\n"
+msgstr "CPU %d deconfigured\n"
+
+#: sys-utils/chcpu.c:233
+#, fuzzy, c-format
+msgid "invalid CPU number in CPU list: %s"
+msgstr "無效的 CPU 數字在中 CPU 清單：%s"
+
+#: sys-utils/chcpu.c:241 text-utils/col.c:131
+#, fuzzy, c-format
msgid ""
-" -m, --mount unshare mounts namespace\n"
-" -u, --uts unshare UTS namespace (hostname etc)\n"
-" -i, --ipc unshare System V IPC namespace\n"
-" -n, --net unshare network namespace\n"
+"\n"
+"Usage:\n"
+" %s [options]\n"
msgstr ""
-"以某些自上層分享的命名空間來執行程式\n"
"\n"
-" -h, --help 用法資訊 (這個說明)\n"
-" -m, --mount 取消分享掛載命名空間\n"
-" -u, --uts 取消分享 UTS 命名空間 (主機名稱等項)\n"
-" -i, --ipc 取消分享 System V IPC 命名空間\n"
-" -n, --net 取消分享網路命名空間\n"
+"用法：\n"
+" %s [選項]\n"
-#: sys-utils/unshare.c:123
-msgid "unshare failed"
-msgstr "unshare 失敗"
+#: sys-utils/chcpu.c:245
+msgid "Configure CPUs in a multi-processor system.\n"
+msgstr ""
-#: sys-utils/unshare.c:127
-msgid "cannot set group id"
-msgstr "無法設定群組識別號"
+#: sys-utils/chcpu.c:249
+#, fuzzy
+msgid ""
+" -e, --enable <cpu-list> enable cpus\n"
+" -d, --disable <cpu-list> disable cpus\n"
+" -c, --configure <cpu-list> configure cpus\n"
+" -g, --deconfigure <cpu-list> deconfigure cpus\n"
+" -p, --dispatch <mode> set dispatching mode\n"
+" -r, --rescan trigger rescan of cpus\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -h, --help 印出這份說明\n"
+" -e, --enable <cpu-list> 啟用 cpus\n"
+" -d, --disable<cpu-list> 停用 cpus\n"
+" -c, --configure<cpu-list> 組配 cpus\n"
+" -g, --deconfigure<cpu-list> deconfigure cpus\n"
+" -p, --dispatch<模式> 設定派送模式\n"
+" -r, --rescan 觸發重新掃描的 cpus\n"
+" -V, --version 輸出版本資訊然後離開\n"
-#: sys-utils/unshare.c:130
-msgid "cannot set user id"
-msgstr "無法設定使用者識別號"
+#: sys-utils/chcpu.c:296
+#, fuzzy
+msgid "failed to initialize sysfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
-#: term-utils/agetty.c:442
+#: sys-utils/chcpu.c:338
#, fuzzy, c-format
-msgid "%s: can't change root directory %s: %m"
-msgstr "%s：無法 exec %s: %m"
+msgid "unsupported argument: %s"
+msgstr "不受支援的引數：%s"
-#: term-utils/agetty.c:447
+#: sys-utils/chmem.c:100
+#, c-format
+msgid "Memory Block %<PRIu64> (0x%016<PRIx64>-0x%016<PRIx64>)"
+msgstr ""
+
+#: sys-utils/chmem.c:124 sys-utils/chmem.c:197
+#, fuzzy
+msgid "Failed to parse index"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/chmem.c:151
#, fuzzy, c-format
-msgid "%s: can't change working directory %s: %m"
-msgstr "%s：無法 exec %s: %m"
+msgid "%s enable failed\n"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: term-utils/agetty.c:452
+#: sys-utils/chmem.c:153
#, fuzzy, c-format
-msgid "%s: can't change process priority: %m"
-msgstr "%s：找不到進程「%s」\n"
+msgid "%s disable failed\n"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: term-utils/agetty.c:458
-#, c-format
-msgid "%s: can't exec %s: %m"
-msgstr "%s：無法 exec %s: %m"
+#: sys-utils/chmem.c:156 sys-utils/chmem.c:242
+#, fuzzy, c-format
+msgid "%s enabled\n"
+msgstr "CPU %d 已啟用\n"
-#: term-utils/agetty.c:487 term-utils/agetty.c:746 term-utils/agetty.c:758
-#: term-utils/agetty.c:1521 term-utils/agetty.c:1881
+#: sys-utils/chmem.c:158 sys-utils/chmem.c:244
#, fuzzy, c-format
-msgid "failed to allocate memory: %m"
-msgstr "配置輸出緩衝區時失敗"
+msgid "%s disabled\n"
+msgstr "CPU %d 已停用\n"
-#: term-utils/agetty.c:663
+#: sys-utils/chmem.c:170
#, c-format
-msgid "bad timeout value: %s"
-msgstr "不當的逾時設定值：%s"
+msgid "Could only enable %s of memory"
+msgstr ""
-#: term-utils/agetty.c:776
+#: sys-utils/chmem.c:172
#, c-format
-msgid "bad speed: %s"
-msgstr "不當的速度：%s"
+msgid "Could only disable %s of memory"
+msgstr ""
-#: term-utils/agetty.c:778
-msgid "too many alternate speeds"
-msgstr "太多交替速度"
+#: sys-utils/chmem.c:206
+#, fuzzy, c-format
+msgid "%s already enabled\n"
+msgstr "CPU %d 已經已啟用\n"
-#: term-utils/agetty.c:899 term-utils/agetty.c:916 term-utils/agetty.c:950
-#, c-format
-msgid "/dev/%s: cannot open as standard input: %m"
-msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+#: sys-utils/chmem.c:208
+#, fuzzy, c-format
+msgid "%s already disabled\n"
+msgstr "CPU %d 已經已停用\n"
-#: term-utils/agetty.c:920 term-utils/agetty.c:924
-#, c-format
-msgid "/dev/%s: not a character device"
-msgstr "/dev/%s: 不是字元裝置"
+#: sys-utils/chmem.c:218
+#, fuzzy, c-format
+msgid "%s enable failed: Zone mismatch"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: term-utils/agetty.c:964
-#, c-format
-msgid "%s: not open for read/write"
-msgstr "%s：無法開啟用於讀取/寫入"
+#: sys-utils/chmem.c:222
+#, fuzzy, c-format
+msgid "%s disable failed: Zone mismatch"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: term-utils/agetty.c:981
-#, c-format
-msgid "%s: dup problem: %m"
-msgstr "%s：dup 問題：%m"
+#: sys-utils/chmem.c:237
+#, fuzzy, c-format
+msgid "%s enable failed"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: term-utils/agetty.c:1332
-msgid "Num Lock off"
-msgstr ""
+#: sys-utils/chmem.c:239
+#, fuzzy, c-format
+msgid "%s disable failed"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: term-utils/agetty.c:1335
-msgid "Num Lock on"
-msgstr ""
+#: sys-utils/chmem.c:265 sys-utils/lsmem.c:478
+#, fuzzy, c-format
+msgid "Failed to read %s"
+msgstr "讀取速度時失敗"
-#: term-utils/agetty.c:1338
-msgid "Caps Lock on"
-msgstr ""
+#: sys-utils/chmem.c:273
+#, fuzzy
+msgid "Failed to parse block number"
+msgstr "剖析列號的時失敗"
-#: term-utils/agetty.c:1341
-msgid "Scroll Lock on"
+#: sys-utils/chmem.c:278
+#, fuzzy
+msgid "Failed to parse size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/chmem.c:282
+#, c-format
+msgid "Size must be aligned to memory block size (%s)"
msgstr ""
-#: term-utils/agetty.c:1344
+#: sys-utils/chmem.c:291
+#, fuzzy
+msgid "Failed to parse start"
+msgstr "剖析開始時失敗"
+
+#: sys-utils/chmem.c:292
+#, fuzzy
+msgid "Failed to parse end"
+msgstr "剖析結束時失敗"
+
+#: sys-utils/chmem.c:296
#, fuzzy, c-format
-msgid ""
-"Hint: %s\n"
-"\n"
-msgstr "類型：%s\n"
+msgid "Invalid start address format: %s"
+msgstr "無效的開始引數"
-#: term-utils/agetty.c:1447
-#, c-format
-msgid "%s: read: %m"
-msgstr "%s：讀取：%m"
+#: sys-utils/chmem.c:298
+#, fuzzy, c-format
+msgid "Invalid end address format: %s"
+msgstr "無效的 sigval 引數"
-#: term-utils/agetty.c:1501
-#, c-format
-msgid "%s: input overrun"
-msgstr "%s：輸入超出"
+#: sys-utils/chmem.c:299
+#, fuzzy
+msgid "Failed to parse start address"
+msgstr "剖析開始時失敗"
-#: term-utils/agetty.c:1651
-#, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %1$s [options] line baud_rate,... [termtype]\n"
-" %1$s [options] baud_rate,... line [termtype]\n"
-msgstr ""
+#: sys-utils/chmem.c:300
+#, fuzzy
+msgid "Failed to parse end address"
+msgstr "剖析結束時失敗"
-#: term-utils/agetty.c:1656
+#: sys-utils/chmem.c:303
#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -8, --8bits assume 8-bit tty\n"
-" -a, --autologin <user> login the specified user automatically\n"
-" -c, --noreset do not reset control mode\n"
-" -f, --issue-file <file> display issue file\n"
-" -h, --flow-control enable hardware flow control\n"
-" -H, --host <hostname> specify login host\n"
-" -i, --noissue do not display issue file\n"
-" -I, --init-string <string> set init string\n"
-" -l, --login-program <file> specify login program\n"
-" -L, --local-line force local line\n"
-" -m, --extract-baud extract baud rate during connect\n"
-" -n, --skip-login do not prompt for login\n"
-" -o, --login-options <opts> options that are passed to login\n"
-" -p, --loginpause wait for any key before the login\n"
-" -R, --hangup do virtually hangup on the tty\n"
-" -s, --keep-baud try to keep baud rate after break\n"
-" -t, --timeout <number> login process timeout\n"
-" -U, --detect-case detect uppercase terminal\n"
-" -w, --wait-cr wait carriage-return\n"
-" --noclear do not clear the screen before prompt\n"
-" --nohints do not print hints\n"
-" --nonewline do not print a newline before issue\n"
-" --no-hostname no hostname at all will be shown\n"
-" --long-hostname show full qualified hostname\n"
-" --version output version information and exit\n"
-" --help display this help and exit\n"
-"\n"
+msgid "Start address and (end address + 1) must be aligned to memory block size (%s)"
msgstr ""
-#: term-utils/agetty.c:1865
-#, c-format
-msgid "user"
-msgstr "使用者"
+#: sys-utils/chmem.c:317
+#, fuzzy, c-format
+msgid "Invalid parameter: %s"
+msgstr "無效的引數：%s"
-#: term-utils/agetty.c:1865
-#, c-format
-msgid "users"
-msgstr "使用者"
+#: sys-utils/chmem.c:324
+#, fuzzy, c-format
+msgid "Invalid range: %s"
+msgstr "無效的引數：%s"
-#: term-utils/mesg.c:70
+#: sys-utils/chmem.c:333
#, fuzzy, c-format
-msgid " %s [options] [y | n]\n"
-msgstr ""
-"\n"
-"用法：%s [選項]\n"
-"\n"
+msgid " %s [options] [SIZE|RANGE|BLOCKRANGE]\n"
+msgstr " %s [選項] [y|n]\n"
-#: term-utils/mesg.c:73
-msgid ""
-" -v, --verbose explain what is being done\n"
-" -V, --version output version information and exit\n"
-" -h, --help output help screen and exit\n"
-"\n"
+#: sys-utils/chmem.c:336
+msgid "Set a particular size or range of memory online or offline.\n"
msgstr ""
-#: term-utils/mesg.c:116
+#: sys-utils/chmem.c:339
#, fuzzy
-msgid "ttyname failed"
-msgstr "unshare 失敗"
-
-#: term-utils/mesg.c:119
-#, fuzzy, c-format
-msgid "stat %s failed"
-msgstr "狀態取得失敗：%s"
+msgid " -e, --enable enable memory\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: term-utils/mesg.c:123
+#: sys-utils/chmem.c:340
#, fuzzy
-msgid "is y"
-msgstr "是 y\n"
+msgid " -d, --disable disable memory\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: term-utils/mesg.c:126
+#: sys-utils/chmem.c:341
#, fuzzy
-msgid "is n"
-msgstr "是 n\n"
-
-#: term-utils/mesg.c:137 term-utils/mesg.c:143
-#, fuzzy, c-format
-msgid "change %s mode failed"
-msgstr "建立號誌時失敗"
+msgid " -b, --blocks use memory blocks\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: term-utils/mesg.c:139
-msgid "write access to your terminal is allowed"
+#: sys-utils/chmem.c:342
+msgid " -z, --zone <name> select memory zone (see below)\n"
msgstr ""
-#: term-utils/mesg.c:145
-msgid "write access to your terminal is denied"
+#: sys-utils/chmem.c:343
+#, fuzzy
+msgid " -v, --verbose verbose output\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/chmem.c:346
+#, fuzzy
+msgid ""
+"\n"
+"Supported zones:\n"
msgstr ""
+"\n"
+"支援的記錄檔機能：\n"
-#: term-utils/mesg.c:148
+#: sys-utils/chmem.c:387 sys-utils/lscpu.c:1430 sys-utils/lsmem.c:642
#, fuzzy, c-format
-msgid "invalid argument: %c"
-msgstr "無效的 iflag：%s"
+msgid "failed to initialize %s handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
-#: term-utils/script.c:121
-#, fuzzy, c-format
-msgid ""
-"output file `%s' is a link\n"
-"Use --force if you really want to use it.\n"
-"Program not started."
+#: sys-utils/chmem.c:433
+msgid "zone ignored, no valid_zones sysfs attribute present"
msgstr ""
-"警告：「%s」是一個鏈結。\n"
-"如果您真的要使用它就輸入「%s [options] %s」。\n"
-"命令稿並未啟動。\n"
-#: term-utils/script.c:131
+#: sys-utils/chmem.c:438
#, fuzzy, c-format
-msgid " %s [options] [file]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "unknown memory zone: %s"
+msgstr "不明優先權名稱：%s。"
-#: term-utils/script.c:134
+#: sys-utils/choom.c:38
+#, fuzzy, c-format
msgid ""
-" -a, --append append the output\n"
-" -c, --command <command> run command rather than interactive shell\n"
-" -r, --return return exit code of the child process\n"
-" -f, --flush run flush after each write\n"
-" --force use output file even when it is a link\n"
-" -q, --quiet be quiet\n"
-" -t, --timing[=<file>] output timing data to stderr (or to FILE)\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+" %1$s [options] -p pid\n"
+" %1$s [options] -n number -p pid\n"
+" %1$s [options] -n number [--] command [args...]]\n"
msgstr ""
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
-#: term-utils/script.c:207 term-utils/scriptreplay.c:195
-#, c-format
-msgid "cannot open timing file %s"
-msgstr "無法開啟時序檔案 %s"
-
-#: term-utils/script.c:242
-#, c-format
-msgid "Script started, file is %s\n"
-msgstr "命令稿已啟動，檔案是 %s\n"
-
-#: term-utils/script.c:362
-#, c-format
-msgid "Script started on %s"
-msgstr "命令稿啟動於 %s"
+#: sys-utils/choom.c:44
+msgid "Display and adjust OOM-killer score.\n"
+msgstr ""
-#: term-utils/script.c:398
+#: sys-utils/choom.c:47
#, fuzzy
-msgid "cannot write script file"
-msgstr "%s：無法寫入命令稿檔案，錯誤：%s\n"
+msgid " -n, --adjust <num> specify the adjust score value\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
-#: term-utils/script.c:475
-#, c-format
-msgid ""
-"\n"
-"Script done on %s"
-msgstr ""
-"\n"
-"命令稿已於 %s 完成"
+#: sys-utils/choom.c:48
+#, fuzzy
+msgid " -p, --pid <num> process ID\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
-#: term-utils/script.c:484
-#, c-format
-msgid "Script done, file is %s\n"
-msgstr "命令稿已完成，檔案是 %s\n"
+#: sys-utils/choom.c:60
+#, fuzzy
+msgid "failed to read OOM score value"
+msgstr "讀取速度時失敗"
-#: term-utils/script.c:506
+#: sys-utils/choom.c:70
#, fuzzy
-msgid "openpty failed"
-msgstr "openpty 失敗\n"
+msgid "failed to read OOM score adjust value"
+msgstr "讀取速度時失敗"
-#: term-utils/script.c:542
+#: sys-utils/choom.c:105
#, fuzzy
-msgid "out of pty's"
-msgstr "pty 數量不足\n"
+msgid "invalid adjust argument"
+msgstr "無效的前端引數"
-#: term-utils/scriptreplay.c:41
+#: sys-utils/choom.c:119 term-utils/mesg.c:177
#, fuzzy, c-format
-msgid " %s [-t] timingfile [typescript] [divisor]\n"
-msgstr "%s <timingfile> [<typescript> [<divisor>]]\n"
+msgid "invalid argument: %s"
+msgstr "無效的引數：%s"
-#: term-utils/scriptreplay.c:45
-msgid ""
-" -t, --timing <file> script timing output file\n"
-" -s, --typescript <file> script terminal session output file\n"
-" -d, --divisor <num> speed up or slow down execution with time divisor\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
+#: sys-utils/choom.c:123
+#, fuzzy
+msgid "no PID or COMMAND specified"
+msgstr "沒有 mountpoint 指定的。"
-#: term-utils/scriptreplay.c:64
-#, c-format
-msgid "expected a number, but got '%s'"
-msgstr "預期一個數字，但是卻得到「%s」"
+#: sys-utils/choom.c:127
+#, fuzzy
+msgid "no OOM score adjust value specified"
+msgstr "指定了無效的偏移值"
-#: term-utils/scriptreplay.c:67 term-utils/scriptreplay.c:71
-#, c-format
-msgid "divisor '%s'"
-msgstr "除數「%s」"
+#: sys-utils/choom.c:135
+#, fuzzy, c-format
+msgid "pid %d's current OOM score: %d\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
-#: term-utils/scriptreplay.c:115
-msgid "write to stdout failed"
-msgstr "寫入標準輸出時失敗"
+#: sys-utils/choom.c:136
+#, fuzzy, c-format
+msgid "pid %d's current OOM score adjust value: %d\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
-#: term-utils/scriptreplay.c:121
-#, c-format
-msgid "unexpected end of file on %s"
-msgstr "未預期的檔案結束於 %s"
+#: sys-utils/choom.c:143 sys-utils/choom.c:150
+#, fuzzy
+msgid "failed to set score adjust value"
+msgstr "設定路徑時失敗"
-#: term-utils/scriptreplay.c:123
+#: sys-utils/choom.c:145
#, c-format
-msgid "failed to read typescript file %s"
-msgstr "讀取 typescript 檔案 %s 時失敗"
+msgid "pid %d's OOM score adjust value changed from %d to %d\n"
+msgstr ""
-#: term-utils/scriptreplay.c:183
-#, fuzzy
-msgid "wrong number of arguments"
-msgstr "未預期的引數數量"
+#: sys-utils/ctrlaltdel.c:28
+#, fuzzy, c-format
+msgid " %s hard|soft\n"
+msgstr " %s <hard|soft>\n"
-#: term-utils/scriptreplay.c:198
+#: sys-utils/ctrlaltdel.c:31
#, c-format
-msgid "cannot open typescript file %s"
-msgstr "無法開啟 typescript 檔案 %s"
+msgid "Set the function of the Ctrl-Alt-Del combination.\n"
+msgstr ""
-#: term-utils/scriptreplay.c:214
-#, c-format
-msgid "failed to read timing file %s"
-msgstr "讀取時序檔案 %s 時失敗"
+#: sys-utils/ctrlaltdel.c:54
+msgid "implicit"
+msgstr ""
-#: term-utils/scriptreplay.c:216
-#, c-format
-msgid "timings file %s: %lu: unexpected format"
-msgstr "æ\99\82åº\8fæª\94æ¡\88 %sï¼\9a%luï¼\9aæ\9cªé \90æ\9c\9fç\9a\84æ ¼å¼\8f"
+#: sys-utils/ctrlaltdel.c:55
+#, fuzzy, c-format
+msgid "unexpected value in %s: %ju"
+msgstr "æ\9cªé \90æ\9c\9fç\9a\84æª\94æ¡\88çµ\90æ\9d\9fæ\96¼ %s"
-#: term-utils/setterm.c:673
+#: sys-utils/ctrlaltdel.c:66
#, fuzzy
-msgid "Argument error."
-msgstr "%s：引數錯誤，用法\n"
+msgid "You must be root to set the Ctrl-Alt-Del behavior"
+msgstr "您必須是根到設定 Ctrl-Alt-Del 行為"
-#: term-utils/setterm.c:680
-msgid ""
-" -term <terminal_name>\n"
-" -reset\n"
-" -initialize\n"
-" -cursor <on|off>\n"
-" -repeat <on|off>\n"
-" -appcursorkeys <on|off>\n"
-" -linewrap <on|off>\n"
-" -default\n"
-" -foreground <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
-" -background <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
-" -ulcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
-" -ulcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
-" -hbcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
-" -hbcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
-" -inversescreen <on|off>\n"
-" -bold <on|off>\n"
-" -half-bright <on|off>\n"
-" -blink <on|off>\n"
-" -reverse <on|off>\n"
-" -underline <on|off>\n"
-" -store >\n"
-" -clear <all|rest>\n"
-" -tabs < tab1 tab2 tab3 ... > (tabn = 1-160)\n"
-" -clrtabs < tab1 tab2 tab3 ... > (tabn = 1-160)\n"
-" -regtabs <1-160>\n"
-" -blank <0-60|force|poke>\n"
-" -dump <1-NR_CONSOLES>\n"
-" -append <1-NR_CONSOLES>\n"
-" -file dumpfilename\n"
-" -msg <on|off>\n"
-" -msglevel <0-8>\n"
-" -powersave <on|vsync|hsync|powerdown|off>\n"
-" -powerdown <0-60>\n"
-" -blength <0-2000>\n"
-" -bfreq freqnumber\n"
-" -version\n"
-" -help\n"
-msgstr ""
-
-#: term-utils/setterm.c:718
+#: sys-utils/ctrlaltdel.c:74 sys-utils/ipcrm.c:395 sys-utils/ipcrm.c:418
#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see lsblk(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 swaplabel(8)。\n"
+msgid "unknown argument: %s"
+msgstr "不明引數：%s"
-#: term-utils/setterm.c:1071
+#: sys-utils/dmesg.c:109
#, fuzzy
-msgid "cannot force blank"
-msgstr "ç\84¡æ³\95å¼·å\88¶ç©ºç\99½\n"
+msgid "system is unusable"
+msgstr "系統æ\98¯ç\84¡æ³\95使ç\94¨"
-#: term-utils/setterm.c:1075
+#: sys-utils/dmesg.c:110
#, fuzzy
-msgid "cannot force unblank"
-msgstr "無法強制非空白\n"
+msgid "action must be taken immediately"
+msgstr "動作必須被佔用即時"
-#: term-utils/setterm.c:1081
+#: sys-utils/dmesg.c:111
#, fuzzy
-msgid "cannot get blank status"
-msgstr "無法取得空白狀態\n"
+msgid "critical conditions"
+msgstr "重要條件"
-#: term-utils/setterm.c:1093
+#: sys-utils/dmesg.c:112
#, fuzzy
-msgid "cannot (un)set powersave mode"
-msgstr "無法(取消)設定省電模式\n"
+msgid "error conditions"
+msgstr "條件時發生錯誤"
-#: term-utils/setterm.c:1113
-#, fuzzy, c-format
-msgid "can not open dump file %s for output"
-msgstr "無法開啟裝置 %s 以供寫入\n"
+#: sys-utils/dmesg.c:113
+#, fuzzy
+msgid "warning conditions"
+msgstr "警告條件"
-#: term-utils/setterm.c:1129 term-utils/setterm.c:1137
+#: sys-utils/dmesg.c:114
#, fuzzy
-msgid "klogctl error"
-msgstr "klogctl 錯誤：%s\n"
+msgid "normal but significant condition"
+msgstr "一般但是顯著的條件"
-#: term-utils/setterm.c:1203
+#: sys-utils/dmesg.c:115
#, fuzzy
-msgid "Error writing screendump"
-msgstr "寫å\85¥è\9e¢å¹\95å\82¾å\8d°æ\99\82ç\99¼ç\94\9fé\8c¯èª¤\n"
+msgid "informational"
+msgstr "å\8f\83è\80\83æ\80§"
-#: term-utils/setterm.c:1210
-#, fuzzy, c-format
-msgid "Couldn't read %s"
-msgstr "無法讀取 %s\n"
+#: sys-utils/dmesg.c:116
+#, fuzzy
+msgid "debug-level messages"
+msgstr "debug-level 訊息"
-#: term-utils/setterm.c:1263
+#: sys-utils/dmesg.c:130
#, fuzzy
-msgid "$TERM is not defined."
-msgstr "%s：$TERM 並未定義。\n"
+msgid "kernel messages"
+msgstr "內核訊息"
-#: term-utils/setterm.c:1271
-msgid "terminfo database cannot be found"
-msgstr ""
+#: sys-utils/dmesg.c:131
+#, fuzzy
+msgid "random user-level messages"
+msgstr "隨機使用者級訊息"
-#: term-utils/setterm.c:1273
-#, fuzzy, c-format
-msgid "%s: unknown terminal type"
-msgstr "%s：不明信號 %s\n"
+#: sys-utils/dmesg.c:132
+#, fuzzy
+msgid "mail system"
+msgstr "郵件系統"
-#: term-utils/setterm.c:1275
-msgid "terminal is hardcopy"
-msgstr ""
+#: sys-utils/dmesg.c:133
+#, fuzzy
+msgid "system daemons"
+msgstr "系統守護程式"
-#: term-utils/ttymsg.c:76
-msgid "too many iov's (change code in wall/ttymsg.c)"
-msgstr "太多 iov's (變更 wall/ttymsg.c 中的編碼)"
+#: sys-utils/dmesg.c:134
+#, fuzzy
+msgid "security/authorization messages"
+msgstr "安全/授權訊息"
-#: term-utils/ttymsg.c:86
-#, c-format
-msgid "excessively long line arg"
-msgstr "過長的命令列引數"
+#: sys-utils/dmesg.c:135
+#, fuzzy
+msgid "messages generated internally by syslogd"
+msgstr "訊息產生的內部由 syslogd"
-#: term-utils/ttymsg.c:141
-#, c-format
-msgid "cannot fork"
-msgstr "無法衍生執行"
+#: sys-utils/dmesg.c:136
+#, fuzzy
+msgid "line printer subsystem"
+msgstr "列印表機子系統"
-#: term-utils/ttymsg.c:145
-#, c-format
-msgid "fork: %s"
-msgstr "衍生：%s"
+#: sys-utils/dmesg.c:137
+#, fuzzy
+msgid "network news subsystem"
+msgstr "網路新聞子系統"
-#: term-utils/ttymsg.c:175
-#, c-format
-msgid "%s: BAD ERROR, message is far too long"
-msgstr ""
+#: sys-utils/dmesg.c:138
+#, fuzzy
+msgid "UUCP subsystem"
+msgstr "UUCP 子系統"
-#: term-utils/wall.c:89
-#, fuzzy, c-format
-msgid " %s [options] [<file>]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: sys-utils/dmesg.c:139
+#, fuzzy
+msgid "clock daemon"
+msgstr "時鐘守護程式"
-#: term-utils/wall.c:92
-msgid ""
-" -n, --nobanner do not print banner, works only for root\n"
-" -t, --timeout <timeout> write timeout in seconds\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
+#: sys-utils/dmesg.c:140
+#, fuzzy
+msgid "security/authorization messages (private)"
+msgstr "安全/授權訊息 (私人的)"
-#: term-utils/wall.c:131
-msgid "--nobanner is available only for root"
+#: sys-utils/dmesg.c:141
+#, fuzzy
+msgid "FTP daemon"
+msgstr "檔案傳輸通訊協定守護程式"
+
+#: sys-utils/dmesg.c:270
+msgid "Display or control the kernel ring buffer.\n"
msgstr ""
-#: term-utils/wall.c:134
+#: sys-utils/dmesg.c:273
#, fuzzy
-msgid "invalid timeout argument"
-msgstr "無效的選項"
+msgid " -C, --clear clear the kernel ring buffer\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: term-utils/wall.c:136
-#, fuzzy, c-format
-msgid "invalid timeout argument: %s"
-msgstr "不當的逾時設定值：%s"
-
-#: term-utils/wall.c:208
-#, fuzzy, c-format
-msgid "can't open temporary file %s"
-msgstr "%s：無法開啟暫存檔。\n"
+#: sys-utils/dmesg.c:274
+#, fuzzy
+msgid " -c, --read-clear read and clear all messages\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: term-utils/wall.c:217
+#: sys-utils/dmesg.c:275
#, fuzzy
-msgid "cannot get passwd uid"
-msgstr "無法設定使用者識別號"
+msgid " -D, --console-off disable printing messages to console\n"
+msgstr " -s 列印訊息到標準輸出\n"
-#: term-utils/wall.c:222
+#: sys-utils/dmesg.c:276
#, fuzzy
-msgid "cannot get tty name"
-msgstr "無法取得磁碟大小"
+msgid " -E, --console-on enable printing messages to console\n"
+msgstr " -s 列印訊息到標準輸出\n"
-#: term-utils/wall.c:238
-#, c-format
-msgid "Broadcast Message from %s@%s"
-msgstr "廣播訊息來自 %s@%s"
+#: sys-utils/dmesg.c:277
+msgid " -F, --file <file> use the file instead of the kernel log buffer\n"
+msgstr ""
-#: term-utils/wall.c:258
-#, fuzzy, c-format
-msgid "will not read %s - use stdin."
-msgstr "%s：無法讀取 %s - 使用標準輸入。\n"
+#: sys-utils/dmesg.c:278
+msgid " -f, --facility <list> restrict output to defined facilities\n"
+msgstr ""
-#: term-utils/wall.c:284
+#: sys-utils/dmesg.c:279
#, fuzzy
-msgid "fstat failed"
-msgstr "%s：fstat 失敗"
+msgid " -H, --human human readable output\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: term-utils/wall.c:290
+#: sys-utils/dmesg.c:280
#, fuzzy
-msgid "fread failed"
-msgstr "讀取失敗：%s"
+msgid " -k, --kernel display kernel messages\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-#: term-utils/write.c:80
+#: sys-utils/dmesg.c:282
#, fuzzy, c-format
-msgid " %s [options] <user> [<ttyname>]\n"
+msgid " -L, --color[=<when>] colorize messages (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/dmesg.c:285
+msgid " -l, --level <list> restrict output to defined levels\n"
msgstr ""
-"\n"
-"用法：%s [選項] 路徑名稱 [路徑名稱...]\n"
-#: term-utils/write.c:84
-msgid ""
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: sys-utils/dmesg.c:286
+msgid " -n, --console-level <level> set level of messages printed to console\n"
msgstr ""
-#: term-utils/write.c:135
+#: sys-utils/dmesg.c:287
#, fuzzy
-msgid "can't find your tty's name"
-msgstr "write：找不到您的 tty 名稱\n"
+msgid " -P, --nopager do not pipe output into a pager\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/dmesg.c:288
+msgid " -p, --force-prefix force timestamp output on each line of multi-line messages\n"
+msgstr ""
-#: term-utils/write.c:148
+#: sys-utils/dmesg.c:289
#, fuzzy
-msgid "you have write permission turned off"
-msgstr "write：您已關閉寫入權限。\n"
+msgid " -r, --raw print the raw message buffer\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: term-utils/write.c:166
-#, fuzzy, c-format
-msgid "%s is not logged in on %s"
-msgstr "write：%s 並未登入 %s。\n"
+#: sys-utils/dmesg.c:290
+#, fuzzy
+msgid " --noescape don't escape unprintable character\n"
+msgstr " -f 不分割長列\n"
-#: term-utils/write.c:172
-#, fuzzy, c-format
-msgid "%s has messages disabled on %s"
-msgstr "write：%s 已於 %s 停用訊息\n"
+#: sys-utils/dmesg.c:291
+#, fuzzy
+msgid " -S, --syslog force to use syslog(2) rather than /dev/kmsg\n"
+msgstr " -s, --status 查詢印表機狀態\n"
-#: term-utils/write.c:267
-#, fuzzy, c-format
-msgid "%s is not logged in"
-msgstr "write：%s 並未登入\n"
+#: sys-utils/dmesg.c:292
+msgid " -s, --buffer-size <size> buffer size to query the kernel ring buffer\n"
+msgstr ""
-#: term-utils/write.c:274
-#, fuzzy, c-format
-msgid "%s has messages disabled"
-msgstr "write：%s 已停用訊息\n"
+#: sys-utils/dmesg.c:293
+#, fuzzy
+msgid " -u, --userspace display userspace messages\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: term-utils/write.c:276
-#, fuzzy, c-format
-msgid "%s is logged in more than once; writing to %s"
-msgstr "write：%s 已登入一次以上；寫入 %s\n"
+#: sys-utils/dmesg.c:294
+#, fuzzy
+msgid " -w, --follow wait for new messages\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
-#: term-utils/write.c:324
-#, fuzzy, c-format
-msgid "tty path %s too long"
-msgstr "輸入列太長。\n"
+#: sys-utils/dmesg.c:295
+msgid " -x, --decode decode facility and level to readable string\n"
+msgstr ""
-#: term-utils/write.c:340
-#, c-format
-msgid "Message from %s@%s (as %s) on %s at %s ..."
-msgstr "訊息來自 %s@%s (身份為 %s) 於 %s 在 %s …"
+#: sys-utils/dmesg.c:296
+#, fuzzy
+msgid " -d, --show-delta show time delta between printed messages\n"
+msgstr " -s, --status 查詢印表機狀態\n"
-#: term-utils/write.c:343
-#, c-format
-msgid "Message from %s@%s on %s at %s ..."
-msgstr "訊息來自 %s@%s 於 %s 在 %s …"
+#: sys-utils/dmesg.c:297
+msgid " -e, --reltime show local time and time delta in readable format\n"
+msgstr ""
-#: term-utils/write.c:370
+#: sys-utils/dmesg.c:298
#, fuzzy
-msgid "carefulputc failed"
-msgstr "calloc 失敗"
+msgid " -T, --ctime show human-readable timestamp (may be inaccurate!)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: text-utils/col.c:124
-#, c-format
+#: sys-utils/dmesg.c:299
+#, fuzzy
+msgid " -t, --notime don't show any timestamp with messages\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/dmesg.c:300
msgid ""
-"\n"
-"Options:\n"
-" -b, --no-backspaces do not output backspaces\n"
-" -f, --fine permit forward half line feeds\n"
-" -p, --pass pass unknown control sequences\n"
-" -h, --tabs convert spaces to tabs\n"
-" -x, --spaces convert tabs to spaces\n"
-" -l, --lines NUM buffer at least NUM lines\n"
-" -V, --version output version information and exit\n"
-" -H, --help display this help and exit\n"
-"\n"
+" --time-format <format> show timestamp using the given format:\n"
+" [delta|reltime|ctime|notime|iso]\n"
+"Suspending/resume will make ctime and iso timestamps inaccurate.\n"
msgstr ""
-#: text-utils/col.c:135 text-utils/colrm.c:65
-#, c-format
+#: sys-utils/dmesg.c:305
+#, fuzzy
msgid ""
-"%s reads from standard input and writes to standard output\n"
"\n"
+"Supported log facilities:\n"
msgstr ""
+"\n"
+"支援的記錄檔機能：\n"
-#: text-utils/col.c:143
-#, fuzzy
-msgid "write error."
-msgstr "col：寫入錯誤。\n"
-
-#: text-utils/col.c:198
+#: sys-utils/dmesg.c:311
#, fuzzy
-msgid "bad -l argument"
-msgstr "col：不當的 -l 引數 %s。\n"
+msgid ""
+"\n"
+"Supported log levels (priorities):\n"
+msgstr ""
+"\n"
+"支援的記錄檔等級 (優先等級)：\n"
-#: text-utils/col.c:200
+#: sys-utils/dmesg.c:365
#, fuzzy, c-format
-msgid "argument %lu is too large"
-msgstr "資料區塊太大"
+msgid "failed to parse level '%s'"
+msgstr "剖析等級『%s 時失敗』"
-#: text-utils/col.c:326
+#: sys-utils/dmesg.c:367
#, fuzzy, c-format
-msgid "warning: can't back up %s."
-msgstr "col：警告：無法備份 %s。\n"
+msgid "unknown level '%s'"
+msgstr "不明等級『%s』"
-#: text-utils/col.c:327
-msgid "past first line"
-msgstr "略過第一列"
+#: sys-utils/dmesg.c:403
+#, fuzzy, c-format
+msgid "failed to parse facility '%s'"
+msgstr "剖析機能『%s 時失敗』"
-#: text-utils/col.c:327
-msgid "-- line already flushed"
-msgstr "-- 列已經清理"
+#: sys-utils/dmesg.c:405
+#, fuzzy, c-format
+msgid "unknown facility '%s'"
+msgstr "不明機能『%s』"
-#: text-utils/colcrt.c:314
+#: sys-utils/dmesg.c:533
#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] [file ...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "cannot mmap: %s"
+msgstr "無法 mmap：%s"
-#: text-utils/colcrt.c:318
-#, c-format
-msgid ""
-" -, --no-underlining suppress all underlining\n"
-" -2, --half-lines print all half-lines\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
+#: sys-utils/dmesg.c:1451
+#, fuzzy
+msgid "invalid buffer size argument"
+msgstr "無效的緩衝區大小引數"
-#: text-utils/colrm.c:57
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [startcol [endcol]]\n"
-msgstr ""
-"\n"
-"用法：%s [選項]\n"
-"\n"
+#: sys-utils/dmesg.c:1508
+#, fuzzy
+msgid "--show-delta is ignored when used together with iso8601 time format"
+msgstr "--reltime 無法使用的一起與 --ctime "
-#: text-utils/colrm.c:61
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
+#: sys-utils/dmesg.c:1531
+#, fuzzy
+msgid "--raw can be used together with --level or --facility only when reading messages from /dev/kmsg"
+msgstr "--raw 無法使用的一起與等級、機能、解碼、delta，ctime 或 notime 選項"
-#: text-utils/colrm.c:182
+#: sys-utils/dmesg.c:1546
#, fuzzy
-msgid "first argument"
-msgstr "不當的引數"
+msgid "read kernel buffer failed"
+msgstr "讀取內核緩衝區失敗"
-#: text-utils/colrm.c:184
+#: sys-utils/dmesg.c:1565
#, fuzzy
-msgid "second argument"
-msgstr "不當的引數"
+msgid "klogctl failed"
+msgstr "klogctl 失敗"
-#: text-utils/column.c:89
+#: sys-utils/eject.c:138
#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage: %s [options] [file ...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid " %s [options] [<device>|<mountpoint>]\n"
+msgstr " %s [選項] [<device>|<mountpoint>]\n"
-#: text-utils/column.c:94
-#, c-format
+#: sys-utils/eject.c:141
+#, fuzzy
+msgid "Eject removable media.\n"
+msgstr "可移除的裝置"
+
+#: sys-utils/eject.c:144
+#, fuzzy
msgid ""
-" -h, --help displays this help text\n"
-" -V, --version output version information and exit\n"
-" -c, --columns <width> width of output in number of characters\n"
-" -t, --table create a table\n"
-" -s, --separator <string> table delimeter\n"
-" -x, --fillrows fill rows before columns\n"
+" -a, --auto <on|off> turn auto-eject feature on or off\n"
+" -c, --changerslot <slot> switch discs on a CD-ROM changer\n"
+" -d, --default display default device\n"
+" -f, --floppy eject floppy\n"
+" -F, --force don't care about device type\n"
+" -i, --manualeject <on|off> toggle manual eject protection on/off\n"
+" -m, --no-unmount do not unmount device even if it is mounted\n"
+" -M, --no-partitions-unmount do not unmount another partitions\n"
+" -n, --noop don't eject, just show device found\n"
+" -p, --proc use /proc/mounts instead of /etc/mtab\n"
+" -q, --tape eject tape\n"
+" -r, --cdrom eject CD-ROM\n"
+" -s, --scsi eject SCSI device\n"
+" -t, --trayclose close tray\n"
+" -T, --traytoggle toggle tray\n"
+" -v, --verbose enable verbose output\n"
+" -x, --cdspeed <speed> set CD-ROM max speed\n"
+" -X, --listspeed list CD-ROM available speeds\n"
msgstr ""
+" -a, --auto <on|off> 輪值 auto-eject 特徵開或關\n"
+" -c, --changerslot<插槽> 切換碟片於唯讀光碟機 changer\n"
+" -d, --default 顯示預設裝置\n"
+" -f, --floppy 退出軟碟\n"
+" -F, --force 不要去管裝置類型\n"
+" -i, --manualeject<於|關閉> 切換手動退出保護開/關\n"
+" -m, --no-unmount 不卸載裝置即使它被掛載\n"
+" -M, --no-partitions-unmount 不卸載另外的分割區\n"
+" -n, --noop 不退出，僅顯示裝置找到\n"
+" -p, --proc 使用/proc/掛載以代替/etc/mtab\n"
+" -q, --tape 退出磁帶\n"
+" -r, --cdrom 退出唯讀光碟機\n"
+" -s, --scsi 退出 SCSI 裝置\n"
+" -t, --trayclose 關閉托盤\n"
+" -T, --traytoggle 切換托盤\n"
+" -v, --verbose 啟用詳細的輸出\n"
+" -x, --cdspeed<速度> 設定唯讀光碟機最大速度\n"
+" -X, --listspeed 清單唯讀光碟機可用速度\n"
-#: text-utils/column.c:101
-#, fuzzy, c-format
+#: sys-utils/eject.c:167
+#, fuzzy
msgid ""
"\n"
-"For more information see column(1).\n"
+"By default tries -r, -s, -f, and -q in order until success.\n"
msgstr ""
"\n"
-"要獲得更多資訊請參看 ipcmk(1)。\n"
-"\n"
+"按照預設嘗試 -r, -s, -f, 和 -q 在中排序直到成功。\n"
-#: text-utils/column.c:140
+#: sys-utils/eject.c:213
#, fuzzy
-msgid "terminal environment COLUMNS failed"
-msgstr "建立號誌時失敗"
+msgid "invalid argument to --changerslot/-c option"
+msgstr "無效的引數到 --changerslot /-c 選項"
-#: text-utils/column.c:155
-msgid "bad columns width value"
-msgstr ""
+#: sys-utils/eject.c:217
+#, fuzzy
+msgid "invalid argument to --cdspeed/-x option"
+msgstr "無效的引數到 --cdspeed /-x 選項"
-#: text-utils/column.c:158
-#, c-format
-msgid "-%c positive integer expected as an argument"
-msgstr ""
+#: sys-utils/eject.c:326
+#, fuzzy
+msgid "CD-ROM auto-eject command failed"
+msgstr "唯讀光碟機 auto-eject 命令失敗"
-#: text-utils/column.c:362
-#, c-format
-msgid "line %d is too long, output will be truncated"
-msgstr ""
+#: sys-utils/eject.c:340
+#, fuzzy
+msgid "CD-ROM door lock is not supported"
+msgstr "光碟機不是就緒"
-#: text-utils/hexdump.c:64
-msgid ""
-"calling hexdump as od has been deprecated in favour to GNU coreutils od."
+#: sys-utils/eject.c:342
+msgid "other users have the drive open and not CAP_SYS_ADMIN"
msgstr ""
-#: text-utils/hexsyntax.c:85
+#: sys-utils/eject.c:344
+#, fuzzy
+msgid "CD-ROM lock door command failed"
+msgstr "唯讀光碟機鎖定匣門命令失敗"
+
+#: sys-utils/eject.c:349
+#, fuzzy
+msgid "CD-Drive may NOT be ejected with device button"
+msgstr "CD-Drive 可能無法被退出與裝置按鈕"
+
+#: sys-utils/eject.c:351
+#, fuzzy
+msgid "CD-Drive may be ejected with device button"
+msgstr "CD-Drive 也許會被退出與裝置按鈕"
+
+#: sys-utils/eject.c:362
+#, fuzzy
+msgid "CD-ROM select disc command failed"
+msgstr "唯讀光碟機選取碟片命令失敗"
+
+#: sys-utils/eject.c:366
+#, fuzzy
+msgid "CD-ROM load from slot command failed"
+msgstr "唯讀光碟機載入從插槽命令失敗"
+
+#: sys-utils/eject.c:368
+#, fuzzy
+msgid "IDE/ATAPI CD-ROM changer not supported by this kernel\n"
+msgstr "整合開發環境/ATAPI 唯讀光碟機 changer 不支援由這個內核\n"
+
+#: sys-utils/eject.c:386
+#, fuzzy
+msgid "CD-ROM tray close command failed"
+msgstr "唯讀光碟機托盤關閉命令失敗"
+
+#: sys-utils/eject.c:388
+#, fuzzy
+msgid "CD-ROM tray close command not supported by this kernel\n"
+msgstr "唯讀光碟機托盤關閉命令不支援由這個內核\n"
+
+#: sys-utils/eject.c:405
+#, fuzzy
+msgid "CD-ROM eject unsupported"
+msgstr "唯讀光碟機退出不受支援的"
+
+#: sys-utils/eject.c:433 sys-utils/eject.c:456 sys-utils/eject.c:1021
+#, fuzzy
+msgid "CD-ROM eject command failed"
+msgstr "唯讀光碟機退出命令失敗"
+
+#: sys-utils/eject.c:436
+#, fuzzy
+msgid "no CD-ROM information available"
+msgstr "沒有唯讀光碟機資訊可用"
+
+#: sys-utils/eject.c:439
+#, fuzzy
+msgid "CD-ROM drive is not ready"
+msgstr "光碟機不是就緒"
+
+#: sys-utils/eject.c:442
+#, fuzzy
+msgid "CD-ROM status command failed"
+msgstr "唯讀光碟機退出命令失敗"
+
+#: sys-utils/eject.c:482
#, fuzzy
-msgid "bad length value"
-msgstr "hexdump：不當的長度值。\n"
+msgid "CD-ROM select speed command failed"
+msgstr "唯讀光碟機選取速度命令失敗"
-#: text-utils/hexsyntax.c:93
+#: sys-utils/eject.c:484
#, fuzzy
-msgid "bad skip value"
-msgstr "hexdump：不當的跳過值。\n"
+msgid "CD-ROM select speed command not supported by this kernel"
+msgstr "唯讀光碟機選取速度命令不支援由這個內核"
-#: text-utils/hexsyntax.c:134
+#: sys-utils/eject.c:521
#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] file...\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "%s: failed to finding CD-ROM name"
+msgstr "%s：無法尋找唯讀光碟機名稱"
-#: text-utils/hexsyntax.c:138
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -b one-byte octal display\n"
-" -c one-byte character display\n"
-" -C canonical hex+ASCII display\n"
-" -d two-byte decimal display\n"
-" -o two-byte octal display\n"
-" -x two-byte hexadecimal display\n"
-" -e format format string to be used for displaying data\n"
-" -f format_file file that contains format strings\n"
-" -n length interpret only length bytes of input\n"
-" -s offset skip offset bytes from the beginning\n"
-" -v display without squeezing similar lines\n"
-" -V output version information and exit\n"
-"\n"
-msgstr ""
+#: sys-utils/eject.c:536
+#, fuzzy, c-format
+msgid "%s: failed to read speed"
+msgstr "%s：無法讀取速度"
+
+#: sys-utils/eject.c:544
+#, fuzzy
+msgid "failed to read speed"
+msgstr "讀取速度時失敗"
-#: text-utils/more.c:299
+#: sys-utils/eject.c:584
+#, fuzzy
+msgid "not an sg device, or old sg driver"
+msgstr "不是 sg 裝置，或舊的 sg 驅動程式"
+
+#: sys-utils/eject.c:656
#, fuzzy, c-format
-msgid ""
-"Usage: %s [options] file...\n"
-"\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "%s: unmounting"
+msgstr "%s：卸載"
-#: text-utils/more.c:302
-#, c-format
-msgid ""
-"Options:\n"
-" -d display help instead of ring bell\n"
-" -f count logical, rather than screen lines\n"
-" -l suppress pause after form feed\n"
-" -p suppress scroll, clean screen and disblay text\n"
-" -c suppress scroll, display text and clean line ends\n"
-" -u suppress underlining\n"
-" -s squeeze multiple blank lines into one\n"
-" -NUM specify the number of lines per screenful\n"
-" +NUM display file beginning from line number NUM\n"
-" +/STRING display file beginning from search string match\n"
-" -V output version information and exit\n"
-msgstr ""
+#: sys-utils/eject.c:674
+#, fuzzy
+msgid "unable to fork"
+msgstr "無法衍生"
-#: text-utils/more.c:537
+#: sys-utils/eject.c:681
#, fuzzy, c-format
-msgid "more (%s)\n"
-msgstr "mkfs (%s)\n"
+msgid "unmount of `%s' did not exit normally"
+msgstr "卸載的『%s』並未正常離開"
-#: text-utils/more.c:541
+#: sys-utils/eject.c:684
#, fuzzy, c-format
-msgid "unknown option -%s"
-msgstr "%s：不明的選項「-%c」\n"
+msgid "unmount of `%s' failed\n"
+msgstr "卸載的『%s』失敗\n"
-#: text-utils/more.c:572
-#, c-format
-msgid ""
-"\n"
-"*** %s: directory ***\n"
-"\n"
-msgstr ""
-"\n"
-"*** %s: 目錄 ***\n"
-"\n"
+#: sys-utils/eject.c:729
+#, fuzzy
+msgid "failed to parse mount table"
+msgstr "剖析掛載表時失敗"
-#: text-utils/more.c:616
-#, c-format
-msgid ""
-"\n"
-"******** %s: Not a text file ********\n"
-"\n"
-msgstr ""
-"\n"
-"******** %s: 不是文字檔 ********\n"
-"\n"
+#: sys-utils/eject.c:795 sys-utils/eject.c:897
+#, fuzzy, c-format
+msgid "%s: mounted on %s"
+msgstr "%s：掛載的於 %s"
-#: text-utils/more.c:720
-#, c-format
-msgid "[Use q or Q to quit]"
-msgstr "[使用 q 或 Q 以離開]"
+#: sys-utils/eject.c:838
+#, fuzzy
+msgid "setting CD-ROM speed to auto"
+msgstr "設定唯讀光碟機速度到自動"
-#: text-utils/more.c:795
-#, c-format
-msgid "--More--"
-msgstr "--更多--"
+#: sys-utils/eject.c:840
+#, fuzzy, c-format
+msgid "setting CD-ROM speed to %ldX"
+msgstr "設定唯讀光碟機速度到 %ldX"
-#: text-utils/more.c:797
-#, c-format
-msgid "(Next file: %s)"
-msgstr "(下一個檔案：%s)"
+#: sys-utils/eject.c:866
+#, fuzzy, c-format
+msgid "default device: `%s'"
+msgstr "預設裝置：『%s』"
-#: text-utils/more.c:802
-#, c-format
-msgid "[Press space to continue, 'q' to quit.]"
-msgstr "[按下空格以繼續，「q」表示離開。]"
+#: sys-utils/eject.c:872
+#, fuzzy, c-format
+msgid "using default device `%s'"
+msgstr "使用預設裝置『%s』"
-#: text-utils/more.c:1235
-#, c-format
-msgid "...back %d pages"
-msgstr "...倒退 %d 頁"
+#: sys-utils/eject.c:891 sys-utils/rtcwake.c:398
+#, fuzzy, c-format
+msgid "%s: unable to find device"
+msgstr "%s：無法找到裝置"
-#: text-utils/more.c:1237
-msgid "...back 1 page"
-msgstr "...倒退 1 頁"
+#: sys-utils/eject.c:893
+#, fuzzy, c-format
+msgid "device name is `%s'"
+msgstr "裝置名稱是『%s』"
-#: text-utils/more.c:1280
-msgid "...skipping one line"
-msgstr "...跳過 1 列"
+#: sys-utils/eject.c:899 sys-utils/umount.c:341 sys-utils/umount.c:365
+#, fuzzy, c-format
+msgid "%s: not mounted"
+msgstr "%s：無法掛載"
-#: text-utils/more.c:1282
-#, c-format
-msgid "...skipping %d lines"
-msgstr "...跳過 %d 列"
-
-#: text-utils/more.c:1319
-msgid ""
-"\n"
-"***Back***\n"
-"\n"
-msgstr ""
-"\n"
-"***倒退***\n"
-"\n"
-
-#: text-utils/more.c:1358
-msgid ""
-"\n"
-"Most commands optionally preceded by integer argument k. Defaults in "
-"brackets.\n"
-"Star (*) indicates argument becomes new default.\n"
-msgstr ""
-"\n"
-"大部份命令可選用前導的整數引數 k。預設值位於中括號內。\n"
-"星號 (*) 用來指定引數成為新的預設值。\n"
-
-#: text-utils/more.c:1365
-msgid ""
-"<space> Display next k lines of text [current screen size]\n"
-"z Display next k lines of text [current screen size]*\n"
-"<return> Display next k lines of text [1]*\n"
-"d or ctrl-D Scroll k lines [current scroll size, initially 11]*\n"
-"q or Q or <interrupt> Exit from more\n"
-"s Skip forward k lines of text [1]\n"
-"f Skip forward k screenfuls of text [1]\n"
-"b or ctrl-B Skip backwards k screenfuls of text [1]\n"
-"' Go to place where previous search started\n"
-"= Display current line number\n"
-"/<regular expression> Search for kth occurrence of regular expression [1]\n"
-"n Search for kth occurrence of last r.e [1]\n"
-"!<cmd> or :!<cmd> Execute <cmd> in a subshell\n"
-"v Start up /usr/bin/vi at current line\n"
-"ctrl-L Redraw screen\n"
-":n Go to kth next file [1]\n"
-":p Go to kth previous file [1]\n"
-":f Display current file name and line number\n"
-". Repeat previous command\n"
-msgstr ""
-"<space> 顯示下一組 k 列文字 [目前螢幕大小]\n"
-"z 顯示下一組 k 列文字 [目前螢幕大小]*\n"
-"<return> 顯示下一組 k 列文字 [1]*\n"
-"d 或 ctrl-D 捲動 k 列 [目前捲動大小，初始值 11]*\n"
-"q 或 Q 或 <interrupt> 離開 more\n"
-"s 向前跳過 k 列文字 [1]\n"
-"f 向前跳過 k 全螢幕的文字 [1]\n"
-"b 或 ctrl-B 向後跳過 k 全螢幕的文字 [1]\n"
-"' 前往前一個搜尋開始的位置\n"
-"= 顯示目前列號\n"
-"/<正規表示式> 搜尋第 k 個出現的正規表示式 [1]\n"
-"n 搜尋第 k 個出現的倒數正規表示式 [1]\n"
-"!<cmd> 或 :!<cmd> 在 subshell 中執行 <cmd>\n"
-"v 在當前列上啟動 /usr/bin/vi\n"
-"ctrl-L 重繪螢幕\n"
-":n 前往後面第 k 個檔案 [1]\n"
-":p 前往前面第 k 個檔案 [1]\n"
-":f 顯示目前檔案名稱和列號\n"
-". 重複前一個命令\n"
-
-#: text-utils/more.c:1434 text-utils/more.c:1439
-#, c-format
-msgid "[Press 'h' for instructions.]"
-msgstr "[按下「h」列出指令。]"
-
-#: text-utils/more.c:1473
-#, c-format
-msgid "\"%s\" line %d"
-msgstr "「%s」第 %d 列"
-
-#: text-utils/more.c:1475
-#, c-format
-msgid "[Not a file] line %d"
-msgstr "[非檔案] 第 %d 列"
+#: sys-utils/eject.c:903
+#, fuzzy, c-format
+msgid "%s: disc device: %s (disk device will be used for eject)"
+msgstr "%s：碟片裝置：%s (磁碟裝置將被用於退出)"
-#: text-utils/more.c:1559
-msgid " Overflow\n"
-msgstr " 溢位\n"
+#: sys-utils/eject.c:911
+#, fuzzy, c-format
+msgid "%s: not found mountpoint or device with the given name"
+msgstr "%s：找不到 mountpoint 或裝置與給定的名稱"
-#: text-utils/more.c:1606
-msgid "...skipping\n"
-msgstr "...跳過\n"
+#: sys-utils/eject.c:914
+#, fuzzy, c-format
+msgid "%s: is whole-disk device"
+msgstr "%s：是 whole-disk 裝置"
-#: text-utils/more.c:1635
-msgid "Regular expression botch"
-msgstr "正規表示式補丁"
+#: sys-utils/eject.c:918
+#, fuzzy, c-format
+msgid "%s: is not hot-pluggable device"
+msgstr "%s：不是可熱插式的裝置"
-#: text-utils/more.c:1643
-msgid ""
-"\n"
-"Pattern not found\n"
-msgstr ""
-"\n"
-"找不到相符的式樣\n"
+#: sys-utils/eject.c:922
+#, fuzzy, c-format
+msgid "device is `%s'"
+msgstr "裝置是『%s』"
-#: text-utils/more.c:1646 text-utils/pg.c:1116 text-utils/pg.c:1267
-msgid "Pattern not found"
-msgstr "找不到相符的式樣"
+#: sys-utils/eject.c:923
+#, fuzzy
+msgid "exiting due to -n/--noop option"
+msgstr "離開由於 -n/--noop 選項"
-#: text-utils/more.c:1693
-msgid "exec failed\n"
-msgstr "執行時失敗\n"
+#: sys-utils/eject.c:937
+#, fuzzy, c-format
+msgid "%s: enabling auto-eject mode"
+msgstr "%s：啟用 auto-eject 模式"
-#: text-utils/more.c:1707
-msgid "can't fork\n"
-msgstr "無法衍生執行\n"
+#: sys-utils/eject.c:939
+#, fuzzy, c-format
+msgid "%s: disabling auto-eject mode"
+msgstr "%s：停用 auto-eject 模式"
-#: text-utils/more.c:1746
-msgid ""
-"\n"
-"...Skipping "
-msgstr ""
-"\n"
-"...跳過 "
+#: sys-utils/eject.c:947
+#, fuzzy, c-format
+msgid "%s: closing tray"
+msgstr "%s：關閉托盤"
-#: text-utils/more.c:1750
-msgid "...Skipping to file "
-msgstr "...跳到檔案 "
+#: sys-utils/eject.c:956
+#, fuzzy, c-format
+msgid "%s: toggling tray"
+msgstr "%s：切換托盤"
-#: text-utils/more.c:1752
-msgid "...Skipping back to file "
-msgstr "...跳回檔案 "
+#: sys-utils/eject.c:965
+#, fuzzy, c-format
+msgid "%s: listing CD-ROM speed"
+msgstr "%s：列表唯讀光碟機速度"
-#: text-utils/more.c:2028
-msgid "Line too long"
-msgstr "列太長"
+#: sys-utils/eject.c:991
+#, fuzzy, c-format
+msgid "error: %s: device in use"
+msgstr "錯誤：%s：裝置在中使用"
-#: text-utils/more.c:2063
-msgid "No previous command to substitute for"
-msgstr "沒有前一個命令可用於替代"
+#: sys-utils/eject.c:1002
+#, fuzzy, c-format
+msgid "%s: selecting CD-ROM disc #%ld"
+msgstr "%s：選取唯讀光碟機碟片 #%ld"
-#: text-utils/parse.c:67
-msgid "line too long"
-msgstr "列的長度過長"
+#: sys-utils/eject.c:1018
+#, fuzzy, c-format
+msgid "%s: trying to eject using CD-ROM eject command"
+msgstr "%s：嘗試退出使用唯讀光碟機退出命令"
-#: text-utils/parse.c:400
+#: sys-utils/eject.c:1020
#, fuzzy
-msgid "byte count with multiple conversion characters"
-msgstr "hexdump：位元組計數與多重轉換字元。\n"
+msgid "CD-ROM eject command succeeded"
+msgstr "唯讀光碟機退出命令成功"
-#: text-utils/parse.c:479
+#: sys-utils/eject.c:1025
#, fuzzy, c-format
-msgid "bad byte count for conversion character %s"
-msgstr "hexdump：不當的位元組計數用於轉換字元 %s。\n"
+msgid "%s: trying to eject using SCSI commands"
+msgstr "%s：嘗試退出使用 SCSI 命令"
-#: text-utils/parse.c:484
-#, fuzzy, c-format
-msgid "%%s requires a precision or a byte count"
-msgstr "hexdump：%%s 要求精確度或位元組計數。\n"
+#: sys-utils/eject.c:1027
+#, fuzzy
+msgid "SCSI eject succeeded"
+msgstr "SCSI 退出成功"
-#: text-utils/parse.c:489
-#, fuzzy, c-format
-msgid "bad format {%s}"
-msgstr "hexdump：不當的格式 {%s}\n"
+#: sys-utils/eject.c:1028
+#, fuzzy
+msgid "SCSI eject failed"
+msgstr "SCSI 退出失敗"
-#: text-utils/parse.c:494
+#: sys-utils/eject.c:1032
#, fuzzy, c-format
-msgid "bad conversion character %%%s"
-msgstr "hexdump：不當的轉換字元 %%%s。\n"
-
-#: text-utils/pg.c:147
-msgid ""
-"All rights reserved.\n"
-"-------------------------------------------------------\n"
-" h this screen\n"
-" q or Q quit program\n"
-" <newline> next page\n"
-" f skip a page forward\n"
-" d or ^D next halfpage\n"
-" l next line\n"
-" $ last page\n"
-" /regex/ search forward for regex\n"
-" ?regex? or ^regex^ search backward for regex\n"
-" . or ^L redraw screen\n"
-" w or z set page size and go to next page\n"
-" s filename save current file to filename\n"
-" !command shell escape\n"
-" p go to previous file\n"
-" n go to next file\n"
-"\n"
-"Many commands accept preceding numbers, for example:\n"
-"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first "
-"page).\n"
-"\n"
-"See pg(1) for more information.\n"
-"-------------------------------------------------------\n"
-msgstr ""
-"版權所有。\n"
-" -------------------------------------------------------\n"
-" h 這個畫面\n"
-" q 或 Q 離開程式\n"
-" <newline> 下一頁\n"
-" f 向前跳過頁面\n"
-" d 或 ^D 下一半頁\n"
-" l 下一列\n"
-" $ 最後一頁\n"
-" /regex/ 向前搜尋 regex\n"
-" ?regex? 或 ^regex^ 向後搜尋 regex\n"
-" . 或 ^L 重繪螢幕\n"
-" w 或 z 設定頁面大小並前往下一頁\n"
-" s 檔名 儲存目前的檔案為檔名\n"
-" !命令 命令殼命令\n"
-" p 前往上一個檔案\n"
-" n 前往下一個檔案\n"
-"\n"
-"許多命令接受前置數量，舉例來說：\n"
-"+1<newline>(下一頁)；-1<newline> (上一頁)；1<newline>(第一頁)。\n"
-"\n"
-"參看 pg(1) 以獲得更多資訊。\n"
-" -------------------------------------------------------\n"
+msgid "%s: trying to eject using floppy eject command"
+msgstr "%s：嘗試退出使用軟碟退出命令"
-#: text-utils/pg.c:223
-#, c-format
-msgid ""
-"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n"
-msgstr "%s：用法：%s [-數字] [-p 字串] [-cefnrs] [+列] [+/式樣/] [多個檔案]\n"
+#: sys-utils/eject.c:1034
+#, fuzzy
+msgid "floppy eject command succeeded"
+msgstr "軟碟退出命令成功"
-#: text-utils/pg.c:232
-#, c-format
-msgid "%s: option requires an argument -- %s\n"
-msgstr "%s：選項需要一個引數 -- %s\n"
+#: sys-utils/eject.c:1035
+#, fuzzy
+msgid "floppy eject command failed"
+msgstr "軟碟退出命令失敗"
-#: text-utils/pg.c:240
-#, c-format
-msgid "%s: illegal option -- %s\n"
-msgstr "%s：不合法的選項 -- %s\n"
+#: sys-utils/eject.c:1039
+#, fuzzy, c-format
+msgid "%s: trying to eject using tape offline command"
+msgstr "%s：嘗試退出使用磁帶離線命令"
-#: text-utils/pg.c:357
-msgid "...skipping forward\n"
-msgstr "...向前跳過\n"
+#: sys-utils/eject.c:1041
+#, fuzzy
+msgid "tape offline command succeeded"
+msgstr "磁帶離線命令成功"
-#: text-utils/pg.c:359
-msgid "...skipping backward\n"
-msgstr "...向後跳過\n"
+#: sys-utils/eject.c:1042
+#, fuzzy
+msgid "tape offline command failed"
+msgstr "磁帶離線命令失敗"
-#: text-utils/pg.c:381
-msgid "No next file"
-msgstr "沒有下個檔案"
+#: sys-utils/eject.c:1046
+#, fuzzy
+msgid "unable to eject"
+msgstr "無法退出"
-#: text-utils/pg.c:385
-msgid "No previous file"
-msgstr "沒有上個檔案"
+#: sys-utils/fallocate.c:84
+#, fuzzy, c-format
+msgid " %s [options] <filename>\n"
+msgstr " %s [選項] <filename>\n"
-#: text-utils/pg.c:920
-#, c-format
-msgid "%s: Read error from %s file\n"
-msgstr "%s：從 %s 檔案讀取時錯誤\n"
+#: sys-utils/fallocate.c:87
+msgid "Preallocate space to, or deallocate space from a file.\n"
+msgstr ""
-#: text-utils/pg.c:926
-#, c-format
-msgid "%s: Unexpected EOF in %s file\n"
-msgstr "%s：在 %s 檔案中出現未預期的檔案結束\n"
+#: sys-utils/fallocate.c:90
+msgid " -c, --collapse-range remove a range from the file\n"
+msgstr ""
-#: text-utils/pg.c:929
-#, c-format
-msgid "%s: Unknown error in %s file\n"
-msgstr "%s：%s 檔案中發生不明錯誤\n"
+#: sys-utils/fallocate.c:91
+msgid " -d, --dig-holes detect zeroes and replace with holes\n"
+msgstr ""
-#: text-utils/pg.c:1024
-#, c-format
-msgid "%s: Cannot create tempfile\n"
-msgstr "%s：無法建立暫存檔\n"
+#: sys-utils/fallocate.c:92
+msgid " -i, --insert-range insert a hole at range, shifting existing data\n"
+msgstr ""
-#: text-utils/pg.c:1033 text-utils/pg.c:1208 text-utils/pg.c:1235
-msgid "RE error: "
-msgstr "正規表示式錯誤："
+#: sys-utils/fallocate.c:93
+msgid " -l, --length <num> length for range operations, in bytes\n"
+msgstr ""
-#: text-utils/pg.c:1190
-msgid "(EOF)"
-msgstr "(檔案結束)"
+#: sys-utils/fallocate.c:94
+msgid " -n, --keep-size maintain the apparent size of the file\n"
+msgstr ""
-#: text-utils/pg.c:1216 text-utils/pg.c:1243
-msgid "No remembered search string"
-msgstr "沒有被記住的搜尋字串"
+#: sys-utils/fallocate.c:95
+#, fuzzy
+msgid " -o, --offset <num> offset for range operations, in bytes\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: text-utils/pg.c:1299
-msgid "Cannot open "
-msgstr "無法開啟 "
+#: sys-utils/fallocate.c:96
+msgid " -p, --punch-hole replace a range with a hole (implies -n)\n"
+msgstr ""
-#: text-utils/pg.c:1347
-msgid "saved"
-msgstr "已儲存"
+#: sys-utils/fallocate.c:97
+msgid " -z, --zero-range zero and ensure allocation of a range\n"
+msgstr ""
-#: text-utils/pg.c:1454
-msgid ": !command not allowed in rflag mode.\n"
-msgstr "：!命令在 rflag 模式不允許。\n"
+#: sys-utils/fallocate.c:99
+#, fuzzy
+msgid " -x, --posix use posix_fallocate(3) instead of fallocate(2)\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: text-utils/pg.c:1486
-msgid "fork() failed, try again later\n"
-msgstr "fork() 失敗，稍後再試\n"
+#: sys-utils/fallocate.c:136
+#, fuzzy
+msgid "fallocate failed: keep size mode is unsupported"
+msgstr "保持大小模式 (-n 選項) 未受支援"
-#: text-utils/pg.c:1694
-msgid "(Next file: "
-msgstr "(下個檔案："
+#: sys-utils/fallocate.c:137 sys-utils/fallocate.c:146
+#, fuzzy
+msgid "fallocate failed"
+msgstr "%s：fallocate 失敗"
-#: text-utils/rev.c:76
+#: sys-utils/fallocate.c:234
#, fuzzy, c-format
-msgid "Usage: %s [options] [file ...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+msgid "%s: read failed"
+msgstr "fread 失敗"
-#: text-utils/rev.c:79
+#: sys-utils/fallocate.c:275
#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
+msgid "%s: %s (%ju bytes) converted to sparse holes.\n"
msgstr ""
-#: text-utils/rev.c:83
-#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see rev(1).\n"
+#: sys-utils/fallocate.c:355
+msgid "posix_fallocate support is not compiled"
msgstr ""
-"\n"
-"要獲得更多資訊請參看 unshare(1)。\n"
-
-#: text-utils/tailf.c:61 text-utils/tailf.c:98
-#, c-format
-msgid "cannot open \"%s\" for read"
-msgstr "無法開啟「%s」以讀取"
-#: text-utils/tailf.c:101 text-utils/tailf.c:278
-#, c-format
-msgid "cannot stat \"%s\""
-msgstr "無法識別「%s」狀態"
-
-#: text-utils/tailf.c:114
-#, c-format
-msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
-msgstr "寫入「%s」不完整 (已寫入 %zd，預期則為 %zd)\n"
+#: sys-utils/fallocate.c:371 sys-utils/fsfreeze.c:106
+msgid "no filename specified"
+msgstr "未指定任何檔名"
-#: text-utils/tailf.c:160
-#, c-format
-msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
-msgstr "%s：無法加入 inotify 監看 (已達到 inotify 的監看限制)。"
+#: sys-utils/fallocate.c:383 sys-utils/fallocate.c:389
+msgid "invalid length value specified"
+msgstr "指定了無效的長度值"
-#: text-utils/tailf.c:164
-#, c-format
-msgid "%s: cannot add inotify watch."
-msgstr "%s：無法加入 inotify 監看。"
+#: sys-utils/fallocate.c:387
+msgid "no length argument specified"
+msgstr "未指定任何長度引數"
-#: text-utils/tailf.c:173
-#, c-format
-msgid "%s: cannot read inotify events"
-msgstr "%s：無法讀取 inotify 事件"
+#: sys-utils/fallocate.c:392
+msgid "invalid offset value specified"
+msgstr "指定了無效的偏移值"
-#: text-utils/tailf.c:197
+#: sys-utils/flock.c:53
#, fuzzy, c-format
msgid ""
-"\n"
-"Usage:\n"
-" %s [option] file\n"
-msgstr "用法：%s [選項] 裝置…\n"
-
-#: text-utils/tailf.c:202
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -n, --lines NUMBER output the last NUMBER lines\n"
-" -NUMBER same as `-n NUMBER'\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+" %1$s [options] <file>|<directory> <command> [<argument>...]\n"
+" %1$s [options] <file>|<directory> -c <command>\n"
+" %1$s [options] <file descriptor number>\n"
msgstr ""
+" %1$s [選項] <file descriptor number>\n"
+" %1$s [選項]<檔案>-c<命令>\n"
+" %1$s [選項}<目錄>-c<命令>\n"
-#: text-utils/tailf.c:220 text-utils/tailf.c:260
+#: sys-utils/flock.c:59
#, fuzzy
-msgid "failed to parse number of lines"
-msgstr "剖析 %s %s 時失敗"
+msgid "Manage file locks from shell scripts.\n"
+msgstr "login：無記憶體可用於命令稿。\n"
-#: text-utils/tailf.c:273
+#: sys-utils/flock.c:62
#, fuzzy
-msgid "no input file specified"
-msgstr "未指定任何檔名"
+msgid " -s, --shared get a shared lock\n"
+msgstr " -s --shared 提取共享的鎖定\n"
-#: text-utils/ul.c:135
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] [file...]\n"
-msgstr "用法：%s [選項] 裝置…\n"
+#: sys-utils/flock.c:63
+#, fuzzy
+msgid " -x, --exclusive get an exclusive lock (default)\n"
+msgstr " -x --exclusive 提取專用鎖定 (預設)\n"
-#: text-utils/ul.c:139
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -t, --terminal TERMINAL override the TERM environment variable\n"
-" -i, --indicated underlining is indicated via a separate line\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-
-#: text-utils/ul.c:208
-msgid "trouble reading terminfo"
-msgstr "讀取 terminfo 時出現問題"
-
-#: text-utils/ul.c:213
-#, c-format
-msgid "terminal `%s' is not known, defaulting to `dumb'"
-msgstr ""
+#: sys-utils/flock.c:64
+#, fuzzy
+msgid " -u, --unlock remove a lock\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: text-utils/ul.c:312
-#, fuzzy, c-format
-msgid "unknown escape sequence in input: %o, %o"
-msgstr "不明的退出序列於輸入：%o, %o\n"
+#: sys-utils/flock.c:65
+#, fuzzy
+msgid " -n, --nonblock fail rather than wait\n"
+msgstr " -n --nonblock 失敗而非等待\n"
-#: text-utils/ul.c:649
+#: sys-utils/flock.c:66
#, fuzzy
-msgid "Input line too long."
-msgstr "輸入列太長。\n"
+msgid " -w, --timeout <secs> wait for a limited amount of time\n"
+msgstr " -w --timeout <secs> 等待限制的數目的時間\n"
+#: sys-utils/flock.c:67
#, fuzzy
-#~ msgid "%s: %d: parse error -- line ignored.\n"
-#~ msgstr "剖析錯誤發生於列號："
+msgid " -E, --conflict-exit-code <number> exit code after conflict or timeout\n"
+msgstr " -E --conflict-exit-code <number> 離開代碼之後衝突或逾時\n"
+#: sys-utils/flock.c:68
#, fuzzy
-#~ msgid "warning: failed to parse %s"
-#~ msgstr "讀取時失敗：%s"
+msgid " -o, --close close file descriptor before running command\n"
+msgstr " -o --close 關閉檔案描述符號之前執行中命令\n"
+#: sys-utils/flock.c:69
#, fuzzy
-#~ msgid "%-25s: failed: %s\n"
-#~ msgstr "%s：衍生執行時失敗：%s\n"
+msgid " -c, --command <command> run a single command string through the shell\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+#: sys-utils/flock.c:70
#, fuzzy
-#~ msgid "%-25s: failed\n"
-#~ msgstr "%s 失敗。\n"
+msgid " -F, --no-fork execute command without forking\n"
+msgstr " -u --unlock 移除鎖定\n"
-#~ msgid " d delete a BSD partition"
-#~ msgstr " d 刪除 BSD 分割"
+#: sys-utils/flock.c:71
+#, fuzzy
+msgid " --verbose increase verbosity\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#~ msgid " l list known filesystem types"
-#~ msgstr " l 列出已知檔案系統類型"
+#: sys-utils/flock.c:108
+#, fuzzy, c-format
+msgid "cannot open lock file %s"
+msgstr "無法開啟鎖定檔案 %s"
-#~ msgid " n add a new BSD partition"
-#~ msgstr " n 加入新的 BSD 分割"
+#: sys-utils/flock.c:210
+#, fuzzy
+msgid "invalid timeout value"
+msgstr "無效的逾時引數"
-#~ msgid " p print BSD partition table"
-#~ msgstr " p 印出 BSD 分割表"
+#: sys-utils/flock.c:214
+#, fuzzy
+msgid "invalid exit code"
+msgstr "無效的離開代碼"
-#~ msgid " t change a partition's filesystem id"
-#~ msgstr " t 變更分割區的檔案系統識別號"
+#: sys-utils/flock.c:231
+msgid "the --no-fork and --close options are incompatible"
+msgstr ""
-#~ msgid " u change units (cylinders/sectors)"
-#~ msgstr " u 變更單位 (磁柱/磁區)"
+#: sys-utils/flock.c:239
+#, fuzzy, c-format
+msgid "%s requires exactly one command argument"
+msgstr "%s 需求精確的一個指令引數"
-#~ msgid " p print the partition table"
-#~ msgstr " p 印出分割表"
+#: sys-utils/flock.c:257
+#, fuzzy
+msgid "bad file descriptor"
+msgstr "旗標描述"
-#~ msgid ""
-#~ "Building a new DOS disklabel with disk identifier 0x%08x.\n"
-#~ "Changes will remain in memory only, until you decide to write them.\n"
-#~ "After that, of course, the previous content won't be recoverable.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "以磁碟識別碼 0x%08x 建立新的 DOS 磁碟標籤。\n"
-#~ "變更將僅存於記憶體之中，直到您決定寫入它們。\n"
-#~ "在此之後，前一個內容當然將無法回復。\n"
-#~ "\n"
+#: sys-utils/flock.c:260
+#, fuzzy
+msgid "requires file descriptor, file or directory"
+msgstr "需求檔案描述符號，檔案或目錄"
-#~ msgid ""
-#~ "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF "
-#~ "disklabel\n"
-#~ msgstr "裝置不含有效的 DOS 分割表，也不含 Sun、SGI 或 OSF 磁碟標籤\n"
+#: sys-utils/flock.c:284
+#, fuzzy
+msgid "failed to get lock"
+msgstr "設定路徑時失敗"
-#~ msgid "Internal error\n"
-#~ msgstr "內部錯誤\n"
+#: sys-utils/flock.c:291
+msgid "timeout while waiting to get lock"
+msgstr ""
-#~ msgid ""
-#~ "\n"
-#~ "\tSorry, no experts menu for SGI partition tables available.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "\t抱歉，沒有可用的 SGI 分割表專家選單。\n"
-#~ "\n"
+#: sys-utils/flock.c:332
+#, fuzzy, c-format
+msgid "%s: getting lock took %ld.%06ld seconds\n"
+msgstr "%s %.6f 秒\n"
-#~ msgid "Do You know, You got a partition overlap on the disk?\n"
-#~ msgstr "您知道在磁碟上有重疊的分割區嗎？\n"
+#: sys-utils/flock.c:343
+#, fuzzy, c-format
+msgid "%s: executing %s\n"
+msgstr "發生錯誤於執行\t%s\n"
-#~ msgid ""
-#~ "Building a new SGI disklabel. Changes will remain in memory only,\n"
-#~ "until you decide to write them. After that, of course, the previous\n"
-#~ "content will be unrecoverably lost.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "建立新的 SGI 磁碟標籤。變更將只保留於記憶體中，\n"
-#~ "直到您決定寫入它們。當然在此之後，前一個\n"
-#~ "內容將會失去而無法回復。\n"
-#~ "\n"
+#: sys-utils/fsfreeze.c:41
+#, fuzzy, c-format
+msgid " %s [options] <mountpoint>\n"
+msgstr " %s [選項] <mount point>\n"
-#~ msgid "out of memory - giving up\n"
-#~ msgstr "記憶體不足 - 放棄\n"
+#: sys-utils/fsfreeze.c:44
+#, fuzzy
+msgid "Suspend access to a filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
+#: sys-utils/fsfreeze.c:47
#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "For more information see mount(8).\n"
-#~ msgstr ""
-#~ "\n"
-#~ "要獲得更多資訊請參看 ipcmk(1)。\n"
-#~ "\n"
+msgid " -f, --freeze freeze the filesystem\n"
+msgstr " t 變更檔案系統的類型"
-#~ msgid "login: memory low, login may fail\n"
-#~ msgstr "登入：記憶體減少，登入也可能會失敗\n"
+#: sys-utils/fsfreeze.c:48
+msgid " -u, --unfreeze unfreeze the filesystem\n"
+msgstr ""
-#~ msgid "can't malloc for ttyclass"
-#~ msgstr "無法將 malloc 用於 ttyclass"
+#: sys-utils/fsfreeze.c:104
+msgid "neither --freeze or --unfreeze specified"
+msgstr ""
-#~ msgid "can't malloc for grplist"
-#~ msgstr "無法將 malloc 用於 grplist"
+#: sys-utils/fsfreeze.c:124
+#, c-format
+msgid "%s: is not a directory"
+msgstr "%s：並非目錄"
-#~ msgid "Login on %s from %s denied by default.\n"
-#~ msgstr "預設會拒絕從 %2$s 登入到 %1$s。\n"
+#: sys-utils/fsfreeze.c:131
+#, c-format
+msgid "%s: freeze failed"
+msgstr "%s：凍結時失敗"
-#~ msgid "Login on %s from %s denied.\n"
-#~ msgstr "從 %2$s 到 %1$s 的登入被拒。\n"
+#: sys-utils/fsfreeze.c:137
+#, c-format
+msgid "%s: unfreeze failed"
+msgstr "%s：解除凍結時失敗"
-#~ msgid "Usage: %s [ -f full-name ] [ -o office ] "
-#~ msgstr "用法：%s [ -f full-name ] [ -o office ] "
+#: sys-utils/fstrim.c:79
+#, fuzzy, c-format
+msgid "%s: not a directory"
+msgstr "%s：不是目錄"
-#~ msgid "[ --help ] [ --version ]\n"
-#~ msgstr "[ --help ] [ --version ]\n"
+#: sys-utils/fstrim.c:93
+#, fuzzy, c-format
+msgid "cannot get realpath: %s"
+msgstr "無法讀取 %s"
-#, fuzzy
-#~ msgid "%s: PAM failure, aborting: %s"
-#~ msgstr "%s：PAM 失敗，放棄：%s\n"
+#: sys-utils/fstrim.c:109
+#, fuzzy, c-format
+msgid "%s: 0 B (dry run) trimmed on %s\n"
+msgstr "%s：掛載的於 %s"
-#~ msgid "Incorrect password."
-#~ msgstr "錯誤的密碼。"
+#: sys-utils/fstrim.c:111
+#, c-format
+msgid "%s: 0 B (dry run) trimmed\n"
+msgstr ""
-#, fuzzy
-#~ msgid ""
-#~ "Usage: %1$s [-s shell] [username]\n"
-#~ " or: %1$s (--list-shells | --help | --version)\n"
-#~ msgstr ""
-#~ "用法：%s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n"
-#~ " [ username ]\n"
+#: sys-utils/fstrim.c:128
+#, fuzzy, c-format
+msgid "%s: FITRIM ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#, fuzzy
-#~ msgid "%s: can only change local entries."
-#~ msgstr "%s：只能變更本地項目；使用 yp%s 做為替代。\n"
+#. TRANSLATORS: The standard value here is a very large number.
+#: sys-utils/fstrim.c:138
+#, fuzzy, c-format
+msgid "%s: %s (%<PRIu64> bytes) trimmed on %s\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
-#, fuzzy
-#~ msgid "%s: can't set default context for /etc/passwd"
-#~ msgstr "%s：無法設定 /etc/passwd 的預設相關環境"
+#. TRANSLATORS: The standard value here is a very large number.
+#: sys-utils/fstrim.c:142
+#, fuzzy, c-format
+msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
-#, fuzzy
-#~ msgid "setpwnam failed"
-#~ msgstr "strdup 失敗"
+#: sys-utils/fstrim.c:255 sys-utils/lsns.c:1078 sys-utils/swapon.c:733
+#: sys-utils/umount.c:257
+#, fuzzy, c-format
+msgid "failed to parse %s"
+msgstr "剖析 %s 時失敗"
-#~ msgid "%s: Use -l option to see list.\n"
-#~ msgstr "%s：使用 -l 選項以參看列表\n"
+#: sys-utils/fstrim.c:273
+#, fuzzy
+msgid "failed to allocate FS handler"
+msgstr "配置迭代器時失敗"
-#~ msgid "Use %s -l to see list.\n"
-#~ msgstr "使用 %s -l 以參看列表。\n"
+#: sys-utils/fstrim.c:361 sys-utils/fstrim.c:490
+#, fuzzy, c-format
+msgid "%s: the discard operation is not supported"
+msgstr "速度 %d 不受支援"
-#~ msgid "usage: login [-fp] [username]\n"
-#~ msgstr "用法：login [-fp] [username]\n"
+#: sys-utils/fstrim.c:382
+#, fuzzy, c-format
+msgid " %s [options] <mount point>\n"
+msgstr " %s [選項] <mount point>\n"
-#~ msgid "out of memory"
-#~ msgstr "記憶體不足"
+#: sys-utils/fstrim.c:385
+msgid "Discard unused blocks on a mounted filesystem.\n"
+msgstr ""
-#~ msgid "Illegal username"
-#~ msgstr "不合法的使用者名稱"
+#: sys-utils/fstrim.c:388
+#, fuzzy
+msgid " -a, --all trim all supported mounted filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+#: sys-utils/fstrim.c:389
#, fuzzy
-#~ msgid "%s login refused on this terminal."
-#~ msgstr "%s 於此終端機被拒絕登入。\n"
+msgid " -A, --fstab trim all supported mounted filesystems from /etc/fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#~ msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
-#~ msgstr "從 %2$s 於 TTY %3$s 被拒絕登入 %1$s"
+#: sys-utils/fstrim.c:390
+msgid " -o, --offset <num> the offset in bytes to start discarding from\n"
+msgstr ""
-#~ msgid "LOGIN %s REFUSED ON TTY %s"
-#~ msgstr "於 TTY %2$s 被拒絕登入 %1$s"
+#: sys-utils/fstrim.c:391
+msgid " -l, --length <num> the number of bytes to discard\n"
+msgstr ""
-#~ msgid "Login incorrect\n"
-#~ msgstr "登入不正確\n"
+#: sys-utils/fstrim.c:392
+msgid " -m, --minimum <num> the minimum extent length to discard\n"
+msgstr ""
+#: sys-utils/fstrim.c:393
#, fuzzy
-#~ msgid "change terminal owner failed"
-#~ msgstr "建立號誌時失敗"
+msgid " -v, --verbose print number of discarded bytes\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+#: sys-utils/fstrim.c:394
#, fuzzy
-#~ msgid "failure forking"
-#~ msgstr "login：衍生程式失敗：%s"
-
-#~ msgid ""
-#~ "\n"
-#~ "%s login: "
-#~ msgstr ""
-#~ "\n"
-#~ "%s login："
+msgid " --quiet suppress trim error messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#~ msgid "NAME too long"
-#~ msgstr "名稱過長"
+#: sys-utils/fstrim.c:395
+#, fuzzy
+msgid " -n, --dry-run does everything, but trim\n"
+msgstr " -n, --noparity 設定同位到無\n"
+#: sys-utils/fstrim.c:454
#, fuzzy
-#~ msgid "login name much too long."
-#~ msgstr "登入名稱過長。\n"
+msgid "failed to parse minimum extent length"
+msgstr "剖析最小延伸長度時失敗"
+#: sys-utils/fstrim.c:473
#, fuzzy
-#~ msgid "login names may not start with '-'."
-#~ msgstr "登入名稱不可用「-」啟始。\n"
+msgid "no mountpoint specified"
+msgstr "沒有 mountpoint 指定的。"
-#~ msgid "EXCESSIVE linefeeds"
-#~ msgstr "EXCESSIVE 換列字元"
+#: sys-utils/hwclock.c:209
+#, c-format
+msgid "Assuming hardware clock is kept in %s time.\n"
+msgstr "假設硬體時鐘被保持在 %s 時間。\n"
-#, fuzzy
-#~ msgid "too many bare linefeeds."
-#~ msgstr "太多單純換列字元。\n"
+#: sys-utils/hwclock.c:210 sys-utils/hwclock.c:274
+msgid "UTC"
+msgstr "UTC"
-#~ msgid "LOGIN FAILURE FROM %s, %s"
-#~ msgstr "從 %s, %s 的登入失敗"
+#: sys-utils/hwclock.c:210 sys-utils/hwclock.c:273
+msgid "local"
+msgstr "本地"
-#~ msgid "LOGIN FAILURE ON %s, %s"
-#~ msgstr "於 %s, %s 的登入失敗"
+#: sys-utils/hwclock.c:260
+#, fuzzy
+msgid ""
+"Warning: unrecognized third line in adjtime file\n"
+"(Expected: `UTC' or `LOCAL' or nothing.)"
+msgstr ""
+"警告：無法辨識的第三列在中 adjtime 檔案\n"
+"(預期：『UTC』或『本地』或沒有任何東西.)"
-#~ msgid "%d LOGIN FAILURES FROM %s, %s"
-#~ msgstr "%d 從 %s, %s 的登入失敗"
+#: sys-utils/hwclock.c:267
+#, c-format
+msgid "Last drift adjustment done at %ld seconds after 1969\n"
+msgstr "最後一次偏差調整已於 1969 年之後 %ld 秒完成\n"
-#~ msgid "%d LOGIN FAILURES ON %s, %s"
-#~ msgstr "%d 於 %s, %s 的登入失敗"
+#: sys-utils/hwclock.c:269
+#, c-format
+msgid "Last calibration done at %ld seconds after 1969\n"
+msgstr "最後一次校測已於 1969 年之後 %ld 秒完成\n"
-#~ msgid "%s: the password file is busy.\n"
-#~ msgstr "%s：密碼檔案忙碌中。\n"
+#: sys-utils/hwclock.c:271
+#, c-format
+msgid "Hardware clock is on %s time\n"
+msgstr "硬體時鐘位於 %s 時間\n"
-#~ msgid "%s: the group file is busy.\n"
-#~ msgstr "%s：群組檔案忙碌中。\n"
+#: sys-utils/hwclock.c:298
+#, c-format
+msgid "Waiting for clock tick...\n"
+msgstr "等候時鐘週期…\n"
-#~ msgid "%s: can't unlock %s: %s (your changes are still in %s)\n"
-#~ msgstr "%s：無法解除鎖定 %s: %s (您的變更是仍然在 %s 中)\n"
+#: sys-utils/hwclock.c:304
+#, c-format
+msgid "...synchronization failed\n"
+msgstr "…同步化失敗\n"
-#~ msgid "calloc failed"
-#~ msgstr "calloc 失敗"
+#: sys-utils/hwclock.c:306
+#, c-format
+msgid "...got clock tick\n"
+msgstr "…獲得時鐘週期\n"
-#~ msgid "WARNING: %s: appears to contain '%s' partition table"
-#~ msgstr "警告：%s：似乎包含「%s」分割表"
+#: sys-utils/hwclock.c:347
+#, c-format
+msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
+msgstr "硬體時鐘的無效值：%4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
-#~ msgid "no magic string found at offset 0x%jx -- ignored"
-#~ msgstr "找不到任何魔術字串於偏移值 0x%jx -- 忽略"
+#: sys-utils/hwclock.c:355
+#, c-format
+msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
+msgstr "硬體時鐘時間：%4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
-#~ msgid "%s: write failed"
-#~ msgstr "%s：寫入失敗"
+#: sys-utils/hwclock.c:382
+#, c-format
+msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
+msgstr "從硬體時鐘讀取時間：%4d/%.2d/%.2d %02d:%02d:%02d\n"
-#~ msgid "%s: /dev directory does not exist."
-#~ msgstr "%s：/dev 目錄不存在。"
+#: sys-utils/hwclock.c:409
+#, c-format
+msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
+msgstr "設定硬體時鐘為 %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
-#~ msgid "loop: can't set capacity on device %s: %s\n"
-#~ msgstr "loop：無法設定裝置上的容量 %s：%s\n"
+#: sys-utils/hwclock.c:445
+#, fuzzy, c-format
+msgid "RTC type: '%s'\n"
+msgstr "類型：%d\n"
-#~ msgid ", offset %<PRIu64>"
-#~ msgstr "，偏移值 %<PRIu64>"
+#: sys-utils/hwclock.c:545
+#, fuzzy, c-format
+msgid "Using delay: %.6f seconds\n"
+msgstr "%s %.6f 秒\n"
-#~ msgid ", encryption type %d\n"
-#~ msgstr "，加密類型 %d\n"
+#: sys-utils/hwclock.c:564
+#, c-format
+msgid "time jumped backward %.6f seconds to %ld.%06ld - retargeting\n"
+msgstr ""
-#~ msgid "loop: can't get info on device %s: %s\n"
-#~ msgstr "loop：無法取得裝置上的資訊 %s: %s\n"
+#: sys-utils/hwclock.c:586
+#, c-format
+msgid "missed it - %ld.%06ld is too far past %ld.%06ld (%.6f > %.6f)\n"
+msgstr ""
-#~ msgid "loop: can't open device %s: %s\n"
-#~ msgstr "loop：無法開啟裝置 %s: %s\n"
+#: sys-utils/hwclock.c:614
+#, c-format
+msgid ""
+"%ld.%06ld is close enough to %ld.%06ld (%.6f < %.6f)\n"
+"Set RTC to %ld (%ld + %d; refsystime = %ld.%06ld)\n"
+msgstr ""
-#~ msgid "%s: no permission to look at /dev/loop%s<N>"
-#~ msgstr "%s：無權限可查看 /dev/loop%s<N>"
+#: sys-utils/hwclock.c:684
+#, c-format
+msgid "Calling settimeofday(NULL, %d) to set persistent_clock_is_local.\n"
+msgstr ""
+#: sys-utils/hwclock.c:687
+msgid "Calling settimeofday(NULL, 0) to lock the warp function."
+msgstr ""
+
+#: sys-utils/hwclock.c:690
+#, fuzzy, c-format
+msgid "Calling settimeofday(%ld.%06ld, %d)\n"
+msgstr "呼叫 settimeofday：\n"
+
+#: sys-utils/hwclock.c:693
+#, fuzzy, c-format
+msgid "Calling settimeofday(NULL, %d) "
+msgstr "呼叫 settimeofday：\n"
+
+#: sys-utils/hwclock.c:695
+msgid "to set the kernel timezone."
+msgstr ""
+
+#: sys-utils/hwclock.c:697
+msgid "to warp System time."
+msgstr ""
+
+#: sys-utils/hwclock.c:714
+msgid "settimeofday() failed"
+msgstr "settimeofday() 失敗"
+
+#: sys-utils/hwclock.c:738
+#, fuzzy, c-format
+msgid "Not adjusting drift factor because the --update-drift option was not used.\n"
+msgstr "無法調整偏差係數，因為之前的硬體時鐘包含了無用資料。\n"
+
+#: sys-utils/hwclock.c:742
+#, c-format
+msgid ""
+"Not adjusting drift factor because last calibration time is zero,\n"
+"so history is bad and calibration startover is necessary.\n"
+msgstr ""
+"無法調整偏差係數，因為最後一次校測時間為零，\n"
+"因而不當的歷史記錄使得啟始校測為必要的。\n"
+
+#: sys-utils/hwclock.c:748
+#, fuzzy, c-format
+msgid "Not adjusting drift factor because it has been less than four hours since the last calibration.\n"
+msgstr "無法調整偏差係數，因為它從最後一次校測起已經慢過於一天。\n"
+
+#: sys-utils/hwclock.c:786
+#, c-format
+msgid ""
+"Clock drift factor was calculated as %f seconds/day.\n"
+"It is far too much. Resetting to zero.\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:793
+#, fuzzy, c-format
+msgid ""
+"Clock drifted %f seconds in the past %f seconds\n"
+"in spite of a drift factor of %f seconds/day.\n"
+"Adjusting drift factor by %f seconds/day\n"
+msgstr ""
+"時鐘偏差為 %.1f 秒發生於過去 %d 秒內，而不管 %f 秒/天的偏差係數。\n"
+"以 %f 秒/天來調整偏差係數\n"
+
+#: sys-utils/hwclock.c:837
+#, fuzzy, c-format
+msgid "Time since last adjustment is %ld second\n"
+msgid_plural "Time since last adjustment is %ld seconds\n"
+msgstr[0] "從最後一次調整後經過的時間為 %d 秒\n"
+
+#: sys-utils/hwclock.c:841
+#, fuzzy, c-format
+msgid "Calculated Hardware Clock drift is %ld.%06ld seconds\n"
+msgstr "%s %.6f 秒\n"
+
+#: sys-utils/hwclock.c:866
+#, c-format
+msgid ""
+"New %s data:\n"
+"%s"
+msgstr ""
+
+#: sys-utils/hwclock.c:876
+#, fuzzy, c-format
+msgid "cannot update %s"
+msgstr "無法開啟 %s"
+
+#: sys-utils/hwclock.c:912
+#, fuzzy, c-format
+msgid "Not setting clock because last adjustment time is zero, so history is bad.\n"
+msgstr "無法設定時鐘因為最後一次調整時間為零，因而歷史記錄是不當的。"
+
+#: sys-utils/hwclock.c:916
+#, fuzzy, c-format
+msgid "Not setting clock because drift factor %f is far too high.\n"
+msgstr "無法設定時鐘因為最後一次調整時間為零，因而歷史記錄是不當的。"
+
+#: sys-utils/hwclock.c:946
+#, c-format
+msgid "No usable clock interface found.\n"
+msgstr "找不到可用的時鐘介面。\n"
+
+#: sys-utils/hwclock.c:948
+#, fuzzy
+msgid "Cannot access the Hardware Clock via any known method."
+msgstr "無法存取硬體時鐘透過任何已知方法。"
+
+#: sys-utils/hwclock.c:952
+#, fuzzy
+msgid "Use the --verbose option to see the details of our search for an access method."
+msgstr "使用 --debug 選項到參看細節的我們的搜尋存取方法。"
+
+#: sys-utils/hwclock.c:1002
+#, fuzzy, c-format
+msgid "Target date: %ld\n"
+msgstr "已交換記憶體頁 %ld\n"
+
+#: sys-utils/hwclock.c:1003
+#, c-format
+msgid "Predicted RTC: %ld\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1033
+msgid "RTC read returned an invalid value."
+msgstr ""
+
+#: sys-utils/hwclock.c:1061
+#, c-format
+msgid "Needed adjustment is less than one second, so not setting clock.\n"
+msgstr "所需的調整少於一秒鐘，因而無法設定時鐘。\n"
+
+#: sys-utils/hwclock.c:1098
+#, fuzzy
+msgid "unable to read the RTC epoch."
+msgstr "無法讀取超區塊"
+
+#: sys-utils/hwclock.c:1100
+#, c-format
+msgid "The RTC epoch is set to %lu.\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1103
+msgid "--epoch is required for --setepoch."
+msgstr ""
+
+#: sys-utils/hwclock.c:1106
+#, fuzzy
+msgid "unable to set the RTC epoch."
+msgstr "無法設定系統時鐘。\n"
+
+#: sys-utils/hwclock.c:1120
+#, fuzzy, c-format
+msgid " %s [function] [option...]\n"
+msgstr " hwclock [函式] [選項...]\n"
+
+#: sys-utils/hwclock.c:1123
+msgid "Time clocks utility."
+msgstr ""
+
+#: sys-utils/hwclock.c:1126
+#, fuzzy
+msgid " -r, --show display the RTC time"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: sys-utils/hwclock.c:1127
+#, fuzzy
+msgid " --get display drift corrected RTC time"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: sys-utils/hwclock.c:1128
+#, fuzzy
+msgid " --set set the RTC according to --date"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1129
+msgid " -s, --hctosys set the system time from the RTC"
+msgstr ""
+
+#: sys-utils/hwclock.c:1130
+#, fuzzy
+msgid " -w, --systohc set the RTC from the system time"
+msgstr " l 列出已知檔案系統類型"
+
+#: sys-utils/hwclock.c:1131
+msgid " --systz send timescale configurations to the kernel"
+msgstr ""
+
+#: sys-utils/hwclock.c:1132
+msgid " -a, --adjust adjust the RTC to account for systematic drift"
+msgstr ""
+
+#: sys-utils/hwclock.c:1134
+#, fuzzy
+msgid " --getepoch display the RTC epoch"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/hwclock.c:1135
+msgid " --setepoch set the RTC epoch according to --epoch"
+msgstr ""
+
+#: sys-utils/hwclock.c:1137
+msgid " --predict predict the drifted RTC time according to --date"
+msgstr ""
+
+#: sys-utils/hwclock.c:1139
+#, fuzzy
+msgid " -u, --utc the RTC timescale is UTC"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1140
+#, fuzzy
+msgid " -l, --localtime the RTC timescale is Local"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/hwclock.c:1143
+#, fuzzy, c-format
+msgid " -f, --rtc <file> use an alternate file to %1$s\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#: sys-utils/hwclock.c:1146
+#, c-format
+msgid " --directisa use the ISA bus instead of %1$s access\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1147
+msgid " --date <time> date/time input for --set and --predict"
+msgstr ""
+
+#: sys-utils/hwclock.c:1148
+msgid " --delay <sec> delay used when set new RTC time"
+msgstr ""
+
+#: sys-utils/hwclock.c:1150
+msgid " --epoch <year> epoch input for --setepoch"
+msgstr ""
+
+#: sys-utils/hwclock.c:1152
+msgid " --update-drift update the RTC drift factor"
+msgstr ""
+
+#: sys-utils/hwclock.c:1154
+#, fuzzy, c-format
+msgid " --noadjfile do not use %1$s\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/hwclock.c:1156
+#, fuzzy, c-format
+msgid " --adjfile <file> use an alternate file to %1$s\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#: sys-utils/hwclock.c:1157
+#, fuzzy
+msgid " --test dry run; implies --verbose"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/hwclock.c:1158
+#, fuzzy
+msgid " -v, --verbose display more details"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/hwclock.c:1255
+#, fuzzy
+msgid "Unable to connect to audit system"
+msgstr "無法連線到稽核系統"
+
+#: sys-utils/hwclock.c:1279
+msgid "use --verbose, --debug has been deprecated."
+msgstr ""
+
+#: sys-utils/hwclock.c:1381
+#, fuzzy, c-format
+msgid "%d too many arguments given"
+msgstr "太多引數"
+
+#: sys-utils/hwclock.c:1389
+msgid "--update-drift requires --set or --systohc"
+msgstr ""
+
+#: sys-utils/hwclock.c:1394
+#, fuzzy
+msgid "With --noadjfile, you must specify either --utc or --localtime"
+msgstr "與 --noadjfile，您必須指定還是 --utc 或 --localtime"
+
+#: sys-utils/hwclock.c:1401
+msgid "--date is required for --set or --predict"
+msgstr ""
+
+#: sys-utils/hwclock.c:1407
+#, fuzzy, c-format
+msgid "invalid date '%s'"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/hwclock.c:1421
+#, fuzzy, c-format
+msgid "System Time: %ld.%06ld\n"
+msgstr "目前的系統時間：%ld = %s\n"
+
+#: sys-utils/hwclock.c:1437
+#, fuzzy
+msgid "Test mode: nothing was changed."
+msgstr "大小的交換區域"
+
+#: sys-utils/hwclock-cmos.c:360
+msgid "ISA port access is not implemented"
+msgstr ""
+
+#: sys-utils/hwclock-cmos.c:362
+#, fuzzy
+msgid "iopl() port access failed"
+msgstr "無法存取檔案 %s"
+
+#: sys-utils/hwclock-cmos.c:373
+msgid "Using direct ISA access to the clock"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:131
+#, fuzzy, c-format
+msgid "Trying to open: %s\n"
+msgstr "嘗試卸載 %s\n"
+
+#: sys-utils/hwclock-rtc.c:156 sys-utils/hwclock-rtc.c:259
+#, fuzzy
+msgid "cannot open rtc device"
+msgstr "無法開啟 "
+
+#: sys-utils/hwclock-rtc.c:192
+#, fuzzy, c-format
+msgid "ioctl(%s) to %s to read the time failed"
+msgstr "ioctl (%s) 到 %s 到讀取時間失敗"
+
+#: sys-utils/hwclock-rtc.c:220
+#, c-format
+msgid "Waiting in loop for time from %s to change\n"
+msgstr "循環等候自 %s 變更起的時間\n"
+
+#: sys-utils/hwclock-rtc.c:239
+#, fuzzy
+msgid "Timed out waiting for time change."
+msgstr "已逾時等待時間變更。"
+
+#: sys-utils/hwclock-rtc.c:286
+#, fuzzy, c-format
+msgid "select() to %s to wait for clock tick timed out"
+msgstr "選取() 到 %s 到等待時鐘週期已逾時"
+
+#: sys-utils/hwclock-rtc.c:289
+#, c-format
+msgid "select() to %s to wait for clock tick failed"
+msgstr "%s 的 select() 等候時鐘週期失敗"
+
+#: sys-utils/hwclock-rtc.c:294
+#, c-format
+msgid "ioctl() to %s to turn off update interrupts failed"
+msgstr "%s 的 ioctl() 關閉更新插斷失敗"
+
+#: sys-utils/hwclock-rtc.c:300
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_UIE_ON, 0) to %s failed"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:353
+#, fuzzy, c-format
+msgid "ioctl(%s) to %s to set the time failed"
+msgstr "ioctl (%s) 到 %s 到設定時間失敗。"
+
+#: sys-utils/hwclock-rtc.c:359
+#, c-format
+msgid "ioctl(%s) was successful.\n"
+msgstr "ioctl(%s) 原本成功。\n"
+
+#: sys-utils/hwclock-rtc.c:375
+msgid "Using the rtc interface to the clock."
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:408
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_READ, epoch_p) to %s failed"
+msgstr "%s 的 ioctl(RTC_EPOCH_READ) 失敗"
+
+#: sys-utils/hwclock-rtc.c:414
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_READ, epoch_p) to %s succeeded.\n"
+msgstr "%s 的 ioctl(RTC_EPOCH_READ) 失敗"
+
+#: sys-utils/hwclock-rtc.c:432
+#, fuzzy, c-format
+msgid "invalid epoch '%s'."
+msgstr "無效的識別號：%s"
+
+#: sys-utils/hwclock-rtc.c:443
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_SET, %lu) to %s failed"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:449
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_SET, %lu) to %s succeeded.\n"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/ipcmk.c:70
+msgid "Create various IPC resources.\n"
+msgstr ""
+
+#: sys-utils/ipcmk.c:73
+#, fuzzy
+msgid " -M, --shmem <size> create shared memory segment of size <size>\n"
+msgstr " -M, --shmem <size> 建立共用記憶體資料段的大小<大小>\n"
+
+#: sys-utils/ipcmk.c:74
+#, fuzzy
+msgid " -S, --semaphore <number> create semaphore array with <number> elements\n"
+msgstr " -S, --semaphore <nsems> 建立號誌陣列與<nsems>元件\n"
+
+#: sys-utils/ipcmk.c:75
+#, fuzzy
+msgid " -Q, --queue create message queue\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/ipcmk.c:76
+#, fuzzy
+msgid " -p, --mode <mode> permission for the resource (default is 0644)\n"
+msgstr " -p, --mode <mode> 權限用於資源 (預設是 0644)\n"
+
+#: sys-utils/ipcmk.c:110 sys-utils/losetup.c:731 sys-utils/zramctl.c:645
+#, fuzzy
+msgid "failed to parse size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/ipcmk.c:117
+#, fuzzy
+msgid "failed to parse elements"
+msgstr "剖析元件時失敗"
+
+#: sys-utils/ipcmk.c:140
+msgid "create share memory failed"
+msgstr "建立共享記憶體時失敗"
+
+#: sys-utils/ipcmk.c:142
+#, c-format
+msgid "Shared memory id: %d\n"
+msgstr "共用記憶體識別號：%d\n"
+
+#: sys-utils/ipcmk.c:148
+msgid "create message queue failed"
+msgstr "建立訊息佇列時失敗"
+
+#: sys-utils/ipcmk.c:150
+#, c-format
+msgid "Message queue id: %d\n"
+msgstr "訊息佇列識別號：%d\n"
+
+#: sys-utils/ipcmk.c:156
+msgid "create semaphore failed"
+msgstr "建立號誌時失敗"
+
+#: sys-utils/ipcmk.c:158
+#, c-format
+msgid "Semaphore id: %d\n"
+msgstr "號誌識別號：%d\n"
+
+#: sys-utils/ipcrm.c:51
+#, fuzzy, c-format
+msgid ""
+" %1$s [options]\n"
+" %1$s shm|msg|sem <id>...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: sys-utils/ipcrm.c:55
+msgid "Remove certain IPC resources.\n"
+msgstr ""
+
+#: sys-utils/ipcrm.c:58
+#, fuzzy
+msgid " -m, --shmem-id <id> remove shared memory segment by id\n"
+msgstr " -m, --shmem-id <id> 移除共用記憶體資料段由 shmid\n"
+
+#: sys-utils/ipcrm.c:59
+#, fuzzy
+msgid " -M, --shmem-key <key> remove shared memory segment by key\n"
+msgstr " -M, --shmem-key <key> 移除共用記憶體資料段由鍵\n"
+
+#: sys-utils/ipcrm.c:60
+#, fuzzy
+msgid " -q, --queue-id <id> remove message queue by id\n"
+msgstr " -q, --queue-id <id> 移除訊息佇列由識別號\n"
+
+#: sys-utils/ipcrm.c:61
+#, fuzzy
+msgid " -Q, --queue-key <key> remove message queue by key\n"
+msgstr " -Q, --queue-key <key> 移除訊息佇列由鍵\n"
+
+#: sys-utils/ipcrm.c:62
+#, fuzzy
+msgid " -s, --semaphore-id <id> remove semaphore by id\n"
+msgstr " -s, --semaphore-id <id> 移除號誌由識別號\n"
+
+#: sys-utils/ipcrm.c:63
+#, fuzzy
+msgid " -S, --semaphore-key <key> remove semaphore by key\n"
+msgstr " -S, --semaphore-key <key> 移除號誌由鍵\n"
+
+#: sys-utils/ipcrm.c:64
+#, fuzzy
+msgid " -a, --all[=shm|msg|sem] remove all (in the specified category)\n"
+msgstr " -a, --all [=<shm|msg|sem>] 全部移除\n"
+
+#: sys-utils/ipcrm.c:65
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: sys-utils/ipcrm.c:86
+#, fuzzy, c-format
+msgid "removing shared memory segment id `%d'\n"
+msgstr "移除共用記憶體資料段識別號『%d』\n"
+
+#: sys-utils/ipcrm.c:91
+#, fuzzy, c-format
+msgid "removing message queue id `%d'\n"
+msgstr "移除訊息佇列識別號『%d』\n"
+
+#: sys-utils/ipcrm.c:96
+#, fuzzy, c-format
+msgid "removing semaphore id `%d'\n"
+msgstr "移除號誌識別號『%d』\n"
+
+#: sys-utils/ipcrm.c:108 sys-utils/ipcrm.c:222
+msgid "permission denied for key"
+msgstr "權限被拒用於鍵值"
+
+#: sys-utils/ipcrm.c:108
+msgid "permission denied for id"
+msgstr "權限被拒用於識別號"
+
+#: sys-utils/ipcrm.c:111 sys-utils/ipcrm.c:228
+msgid "invalid key"
+msgstr "無效的鍵值"
+
+#: sys-utils/ipcrm.c:111
+msgid "invalid id"
+msgstr "無效的識別號"
+
+#: sys-utils/ipcrm.c:114 sys-utils/ipcrm.c:225
+msgid "already removed key"
+msgstr "已經移除的鍵值"
+
+#: sys-utils/ipcrm.c:114
+msgid "already removed id"
+msgstr "已經移除的識別號"
+
+#: sys-utils/ipcrm.c:117 sys-utils/ipcrm.c:231
+#, fuzzy
+msgid "key failed"
+msgstr "鍵失敗"
+
+#: sys-utils/ipcrm.c:117
+#, fuzzy
+msgid "id failed"
+msgstr "識別號失敗"
+
+#: sys-utils/ipcrm.c:134
+#, fuzzy, c-format
+msgid "invalid id: %s"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/ipcrm.c:167
+#, c-format
+msgid "resource(s) deleted\n"
+msgstr "資源已刪除\n"
+
+#: sys-utils/ipcrm.c:200
+#, fuzzy, c-format
+msgid "illegal key (%s)"
+msgstr "不合法的鍵 (%s)"
+
+#: sys-utils/ipcrm.c:256
+#, fuzzy
+msgid "kernel not configured for shared memory"
+msgstr "內核無法已組配用於共用記憶體"
+
+#: sys-utils/ipcrm.c:269
+#, fuzzy
+msgid "kernel not configured for semaphores"
+msgstr "內核無法已組配用於號誌"
+
+#: sys-utils/ipcrm.c:290
+#, fuzzy
+msgid "kernel not configured for message queues"
+msgstr "內核無法已組配用於訊息佇列"
+
+#: sys-utils/ipcs.c:53
+#, fuzzy, c-format
+msgid ""
+" %1$s [resource-option...] [output-option]\n"
+" %1$s -m|-q|-s -i <id>\n"
+msgstr ""
+"用法：%1$s [資源]... [輸出格式]\n"
+" %1$s [資源] -i 識別號\n"
+"\n"
+
+#: sys-utils/ipcs.c:57 sys-utils/lsipc.c:294
+#, fuzzy
+msgid "Show information on IPC facilities.\n"
+msgstr ""
+"對於您有讀取權限的項目，提供 ipc 機能的資訊。\n"
+"\n"
+
+#: sys-utils/ipcs.c:60
+#, fuzzy
+msgid " -i, --id <id> print details on resource identified by <id>\n"
+msgstr " -i, --id <id> 列印細節於資源識別的由識別號\n"
+
+#: sys-utils/ipcs.c:64 sys-utils/lsipc.c:297
+#, fuzzy
+msgid "Resource options:\n"
+msgstr "資源選項：\n"
+
+#: sys-utils/ipcs.c:65 sys-utils/lsipc.c:298
+#, fuzzy
+msgid " -m, --shmems shared memory segments\n"
+msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#: sys-utils/ipcs.c:66 sys-utils/lsipc.c:299
+#, fuzzy
+msgid " -q, --queues message queues\n"
+msgstr " -q, --queues 訊息佇列\n"
+
+#: sys-utils/ipcs.c:67 sys-utils/lsipc.c:300
+#, fuzzy
+msgid " -s, --semaphores semaphores\n"
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/ipcs.c:68
+#, fuzzy
+msgid " -a, --all all (default)\n"
+msgstr " -a, --all 所有 (預設)\n"
+
+#: sys-utils/ipcs.c:71
+#, fuzzy
+msgid "Output options:\n"
+msgstr "輸出格式：\n"
+
+#: sys-utils/ipcs.c:72
+#, fuzzy
+msgid " -t, --time show attach, detach and change times\n"
+msgstr " -t, --time 顯示附加、卸離和變更次\n"
+
+#: sys-utils/ipcs.c:73
+#, fuzzy
+msgid " -p, --pid show PIDs of creator and last operator\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/ipcs.c:74
+#, fuzzy
+msgid " -c, --creator show creator and owner\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
+
+#: sys-utils/ipcs.c:75
+#, fuzzy
+msgid " -l, --limits show resource limits\n"
+msgstr " -l, --limits 顯示資源限度\n"
+
+#: sys-utils/ipcs.c:76
+#, fuzzy
+msgid " -u, --summary show status summary\n"
+msgstr " -u, --summary 顯示狀態概要\n"
+
+#: sys-utils/ipcs.c:77
+#, fuzzy
+msgid " --human show sizes in human-readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/ipcs.c:78
+#, fuzzy
+msgid " -b, --bytes show sizes in bytes\n"
+msgstr " -l, --limits 顯示資源限度\n"
+
+#: sys-utils/ipcs.c:164
+msgid "when using an ID, a single resource must be specified"
+msgstr ""
+
+#: sys-utils/ipcs.c:204
+#, fuzzy, c-format
+msgid "unable to fetch shared memory limits\n"
+msgstr "最大共用記憶體 (千位元組) = %llu\n"
+
+#: sys-utils/ipcs.c:207
+#, c-format
+msgid "------ Shared Memory Limits --------\n"
+msgstr "------ 共用記憶體限度 --------\n"
+
+#: sys-utils/ipcs.c:208
+#, fuzzy, c-format
+msgid "max number of segments = %ju\n"
+msgstr "最大資料段數量 = %lu\n"
+
+#: sys-utils/ipcs.c:210
+#, fuzzy
+msgid "max seg size"
+msgstr "最大檔案大小"
+
+#: sys-utils/ipcs.c:218
+#, fuzzy
+msgid "max total shared memory"
+msgstr "最大共用記憶體 (千位元組) = %llu\n"
+
+#: sys-utils/ipcs.c:220
+#, fuzzy
+msgid "min seg size"
+msgstr "最大常駐設定大小"
+
+#: sys-utils/ipcs.c:232
+#, c-format
+msgid "kernel not configured for shared memory\n"
+msgstr "內核未組配支援共用記憶體\n"
+
+#: sys-utils/ipcs.c:236
+#, c-format
+msgid "------ Shared Memory Status --------\n"
+msgstr "------ 共用記憶體狀態 --------\n"
+
+#. TRANSLATORS: This output format is maintained for backward
+#. compatibility as ipcs is used in scripts. For consistency
+#. with the rest, the translated form can follow this model:
+#. *
+#. "segments allocated = %d\n"
+#. "pages allocated = %ld\n"
+#. "pages resident = %ld\n"
+#. "pages swapped = %ld\n"
+#. "swap performance = %ld attempts, %ld successes\n"
+#.
+#: sys-utils/ipcs.c:248
+#, fuzzy, c-format
+msgid ""
+"segments allocated %d\n"
+"pages allocated %ld\n"
+"pages resident %ld\n"
+"pages swapped %ld\n"
+"Swap performance: %ld attempts\t %ld successes\n"
+msgstr ""
+"資料段配置 %d\n"
+"頁面配置 %ld\n"
+"頁面常駐 %ld\n"
+"頁面交換 %ld\n"
+"交換效能：%ld 試圖\t %ld 成功\n"
+
+#: sys-utils/ipcs.c:265
+#, c-format
+msgid "------ Shared Memory Segment Creators/Owners --------\n"
+msgstr "------ 共用記憶體資料段建立者/擁有者 --------\n"
+
+#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:273 sys-utils/ipcs.c:280
+#: sys-utils/ipcs.c:286
+msgid "shmid"
+msgstr "shmid"
+
+#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:286 sys-utils/ipcs.c:392
+#: sys-utils/ipcs.c:407 sys-utils/ipcs.c:495 sys-utils/ipcs.c:513
+msgid "perms"
+msgstr "perms"
+
+#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
+msgid "cuid"
+msgstr "cuid"
+
+#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
+msgid "cgid"
+msgstr "cgid"
+
+#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
+msgid "uid"
+msgstr "uid"
+
+#: sys-utils/ipcs.c:267 sys-utils/ipcs.c:392 sys-utils/ipcs.c:495
+msgid "gid"
+msgstr "gid"
+
+#: sys-utils/ipcs.c:271
+#, c-format
+msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
+msgstr "------ 共用記憶體附加/卸離/變更 次數 --------\n"
+
+#: sys-utils/ipcs.c:273 sys-utils/ipcs.c:280 sys-utils/ipcs.c:286
+#: sys-utils/ipcs.c:398 sys-utils/ipcs.c:407 sys-utils/ipcs.c:501
+#: sys-utils/ipcs.c:507 sys-utils/ipcs.c:513
+msgid "owner"
+msgstr "擁有者"
+
+#: sys-utils/ipcs.c:273
+msgid "attached"
+msgstr "已附加"
+
+#: sys-utils/ipcs.c:273
+msgid "detached"
+msgstr "已卸離"
+
+#: sys-utils/ipcs.c:274
+msgid "changed"
+msgstr "已變更"
+
+#: sys-utils/ipcs.c:278
+#, c-format
+msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
+msgstr "------ 共用記憶體建立者/最後操作 PIDs --------\n"
+
+#: sys-utils/ipcs.c:280
+msgid "cpid"
+msgstr "cpid"
+
+#: sys-utils/ipcs.c:280
+msgid "lpid"
+msgstr "lpid"
+
+#: sys-utils/ipcs.c:284
+#, c-format
+msgid "------ Shared Memory Segments --------\n"
+msgstr "------ 共用記憶體資料段 --------\n"
+
+#: sys-utils/ipcs.c:286 sys-utils/ipcs.c:407 sys-utils/ipcs.c:513
+msgid "key"
+msgstr "鍵值"
+
+#: sys-utils/ipcs.c:287 sys-utils/ipcs.c:514
+msgid "size"
+msgstr ""
+
+#: sys-utils/ipcs.c:287 sys-utils/prlimit.c:75 sys-utils/prlimit.c:76
+#: sys-utils/prlimit.c:78 sys-utils/prlimit.c:79 sys-utils/prlimit.c:81
+#: sys-utils/prlimit.c:82 sys-utils/prlimit.c:86 sys-utils/prlimit.c:90
+msgid "bytes"
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:288
+msgid "nattch"
+msgstr "使用數"
+
+#: sys-utils/ipcs.c:288
+msgid "status"
+msgstr "狀態"
+
+#: sys-utils/ipcs.c:312 sys-utils/ipcs.c:314 sys-utils/ipcs.c:316
+#: sys-utils/ipcs.c:430 sys-utils/ipcs.c:432 sys-utils/ipcs.c:538
+#: sys-utils/ipcs.c:540 sys-utils/ipcs.c:542 sys-utils/ipcs.c:596
+#: sys-utils/ipcs.c:598 sys-utils/ipcs.c:627 sys-utils/ipcs.c:629
+#: sys-utils/ipcs.c:631 sys-utils/ipcs.c:655
+msgid "Not set"
+msgstr "未設定"
+
+#: sys-utils/ipcs.c:342 sys-utils/lsipc.c:997 sys-utils/lsipc.c:1003
+msgid "dest"
+msgstr "目標"
+
+#: sys-utils/ipcs.c:343 sys-utils/lsipc.c:998 sys-utils/lsipc.c:1011
+msgid "locked"
+msgstr "已鎖定"
+
+#: sys-utils/ipcs.c:363
+#, fuzzy, c-format
+msgid "unable to fetch semaphore limits\n"
+msgstr "設定 %s 資源限制時失敗"
+
+#: sys-utils/ipcs.c:366
+#, c-format
+msgid "------ Semaphore Limits --------\n"
+msgstr "------ 號誌限度 --------\n"
+
+#: sys-utils/ipcs.c:367
+#, c-format
+msgid "max number of arrays = %d\n"
+msgstr "最大陣列數量 = %d\n"
+
+#: sys-utils/ipcs.c:368
+#, c-format
+msgid "max semaphores per array = %d\n"
+msgstr "各陣列最大號誌 = %d\n"
+
+#: sys-utils/ipcs.c:369
+#, c-format
+msgid "max semaphores system wide = %d\n"
+msgstr "系統整體最大號誌 = %d\n"
+
+#: sys-utils/ipcs.c:370
+#, c-format
+msgid "max ops per semop call = %d\n"
+msgstr "各 semop 呼叫最大 ops = %d\n"
+
+#: sys-utils/ipcs.c:371
+#, fuzzy, c-format
+msgid "semaphore max value = %u\n"
+msgstr "號誌最大值 = %d\n"
+
+#: sys-utils/ipcs.c:380
+#, c-format
+msgid "kernel not configured for semaphores\n"
+msgstr "內核未組配用於號誌\n"
+
+#: sys-utils/ipcs.c:383
+#, c-format
+msgid "------ Semaphore Status --------\n"
+msgstr "------ 號誌狀態 --------\n"
+
+#: sys-utils/ipcs.c:384
+#, c-format
+msgid "used arrays = %d\n"
+msgstr "已用陣列 = %d\n"
+
+#: sys-utils/ipcs.c:385
+#, c-format
+msgid "allocated semaphores = %d\n"
+msgstr "已配置號誌 = %d\n"
+
+#: sys-utils/ipcs.c:390
+#, c-format
+msgid "------ Semaphore Arrays Creators/Owners --------\n"
+msgstr "------ 號誌陣列建立者/擁有者 --------\n"
+
+#: sys-utils/ipcs.c:392 sys-utils/ipcs.c:398 sys-utils/ipcs.c:407
+msgid "semid"
+msgstr "semid"
+
+#: sys-utils/ipcs.c:396
+#, c-format
+msgid "------ Semaphore Operation/Change Times --------\n"
+msgstr "------ 號誌作業/變更 次數 --------\n"
+
+#: sys-utils/ipcs.c:398
+msgid "last-op"
+msgstr "最後操作者"
+
+#: sys-utils/ipcs.c:398
+msgid "last-changed"
+msgstr "最後變更者"
+
+#: sys-utils/ipcs.c:405
+#, c-format
+msgid "------ Semaphore Arrays --------\n"
+msgstr "------ 號誌陣列 --------\n"
+
+#: sys-utils/ipcs.c:407
+msgid "nsems"
+msgstr "nsems"
+
+#: sys-utils/ipcs.c:465
+#, fuzzy, c-format
+msgid "unable to fetch message limits\n"
+msgstr "磁頭數量"
+
+#: sys-utils/ipcs.c:468
+#, c-format
+msgid "------ Messages Limits --------\n"
+msgstr "------ 訊息限度 --------\n"
+
+#: sys-utils/ipcs.c:469
+#, c-format
+msgid "max queues system wide = %d\n"
+msgstr "系統整體最大佇列 = %d\n"
+
+#: sys-utils/ipcs.c:471
+#, fuzzy
+msgid "max size of message"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/ipcs.c:473
+#, fuzzy
+msgid "default max size of queue"
+msgstr "預設佇列最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/ipcs.c:480
+#, c-format
+msgid "kernel not configured for message queues\n"
+msgstr "內核未組配用於訊息佇列\n"
+
+#: sys-utils/ipcs.c:483
+#, c-format
+msgid "------ Messages Status --------\n"
+msgstr "------ 訊息狀態 --------\n"
+
+#: sys-utils/ipcs.c:485
+#, c-format
+msgid "allocated queues = %d\n"
+msgstr "已配置佇列 = %d\n"
+
+#: sys-utils/ipcs.c:486
+#, c-format
+msgid "used headers = %d\n"
+msgstr "已用標頭 = %d\n"
+
+#: sys-utils/ipcs.c:488
+#, fuzzy
+msgid "used space"
+msgstr "已用空間 = %d 位元組\n"
+
+#: sys-utils/ipcs.c:489
+#, fuzzy
+msgid " bytes\n"
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:493
+#, c-format
+msgid "------ Message Queues Creators/Owners --------\n"
+msgstr "------ 訊息佇列建立者/擁有者 --------\n"
+
+#: sys-utils/ipcs.c:495 sys-utils/ipcs.c:501 sys-utils/ipcs.c:507
+#: sys-utils/ipcs.c:513
+msgid "msqid"
+msgstr "msqid"
+
+#: sys-utils/ipcs.c:499
+#, c-format
+msgid "------ Message Queues Send/Recv/Change Times --------\n"
+msgstr "------ 訊息佇列發送/接收/變更 次數 --------\n"
+
+#: sys-utils/ipcs.c:501
+msgid "send"
+msgstr "發送"
+
+#: sys-utils/ipcs.c:501
+msgid "recv"
+msgstr "接收"
+
+#: sys-utils/ipcs.c:501
+msgid "change"
+msgstr "變更"
+
+#: sys-utils/ipcs.c:505
+#, c-format
+msgid "------ Message Queues PIDs --------\n"
+msgstr "------ 訊息佇列 PIDs --------\n"
+
+#: sys-utils/ipcs.c:507
+msgid "lspid"
+msgstr "lspid"
+
+#: sys-utils/ipcs.c:507
+msgid "lrpid"
+msgstr "lrpid"
+
+#: sys-utils/ipcs.c:511
+#, c-format
+msgid "------ Message Queues --------\n"
+msgstr "------ 訊息佇列 --------\n"
+
+#: sys-utils/ipcs.c:514
+msgid "used-bytes"
+msgstr "已用位元組"
+
+#: sys-utils/ipcs.c:515
+msgid "messages"
+msgstr "訊息"
+
+#: sys-utils/ipcs.c:580 sys-utils/ipcs.c:610 sys-utils/ipcs.c:643
+#: sys-utils/lsipc.c:547 sys-utils/lsipc.c:739 sys-utils/lsipc.c:899
+#, fuzzy, c-format
+msgid "id %d not found"
+msgstr "%s：找不到"
+
+#: sys-utils/ipcs.c:584
+#, c-format
+msgid ""
+"\n"
+"Shared memory Segment shmid=%d\n"
+msgstr ""
+"\n"
+"共用記憶體資料段 shmid = %d\n"
+
+#: sys-utils/ipcs.c:585
+#, fuzzy, c-format
+msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
+msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
+
+#: sys-utils/ipcs.c:588
+#, c-format
+msgid "mode=%#o\taccess_perms=%#o\n"
+msgstr "mode=%#o\taccess_perms=%#o\n"
+
+#: sys-utils/ipcs.c:590
+msgid "size="
+msgstr ""
+
+#: sys-utils/ipcs.c:590
+#, fuzzy
+msgid "bytes="
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:592
+#, fuzzy, c-format
+msgid "lpid=%u\tcpid=%u\tnattch=%jd\n"
+msgstr "位元組=%lu\tlpid=%d\tcpid=%d\tnattch=%ld\n"
+
+#: sys-utils/ipcs.c:595
+#, c-format
+msgid "att_time=%-26.24s\n"
+msgstr "att_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:597
+#, c-format
+msgid "det_time=%-26.24s\n"
+msgstr "det_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:599 sys-utils/ipcs.c:630
+#, c-format
+msgid "change_time=%-26.24s\n"
+msgstr "change_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:614
+#, c-format
+msgid ""
+"\n"
+"Message Queue msqid=%d\n"
+msgstr ""
+"\n"
+"訊息佇列 msqid=%d\n"
+
+#: sys-utils/ipcs.c:615
+#, fuzzy, c-format
+msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
+msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\t模式=%#o\n"
+
+#: sys-utils/ipcs.c:619
+msgid "csize="
+msgstr ""
+
+#: sys-utils/ipcs.c:619
+#, fuzzy
+msgid "cbytes="
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:621
+msgid "qsize="
+msgstr ""
+
+#: sys-utils/ipcs.c:621
+#, fuzzy
+msgid "qbytes="
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:626
+#, c-format
+msgid "send_time=%-26.24s\n"
+msgstr "send_time =%-26.24s\n"
+
+#: sys-utils/ipcs.c:628
+#, c-format
+msgid "rcv_time=%-26.24s\n"
+msgstr "rcv_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:647
+#, c-format
+msgid ""
+"\n"
+"Semaphore Array semid=%d\n"
+msgstr ""
+"\n"
+"號誌陣列 semid=%d\n"
+
+#: sys-utils/ipcs.c:648
+#, fuzzy, c-format
+msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
+msgstr "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
+
+#: sys-utils/ipcs.c:651
+#, c-format
+msgid "mode=%#o, access_perms=%#o\n"
+msgstr "模式=%#o, access_perms=%#o\n"
+
+#: sys-utils/ipcs.c:653
+#, fuzzy, c-format
+msgid "nsems = %ju\n"
+msgstr "nsems = %ld\n"
+
+#: sys-utils/ipcs.c:654
+#, c-format
+msgid "otime = %-26.24s\n"
+msgstr "otime = %-26.24s\n"
+
+#: sys-utils/ipcs.c:656
+#, c-format
+msgid "ctime = %-26.24s\n"
+msgstr "ctime = %-26.24s\n"
+
+#: sys-utils/ipcs.c:659
+msgid "semnum"
+msgstr "semnum"
+
+#: sys-utils/ipcs.c:659
+msgid "value"
+msgstr "值"
+
+#: sys-utils/ipcs.c:659
+msgid "ncount"
+msgstr "ncount"
+
+#: sys-utils/ipcs.c:659
+msgid "zcount"
+msgstr "zcount"
+
+#: sys-utils/ipcs.c:659
+msgid "pid"
+msgstr "pid"
+
+#: sys-utils/ipcutils.c:232 sys-utils/ipcutils.c:236 sys-utils/ipcutils.c:240
+#: sys-utils/ipcutils.c:244
+#, fuzzy, c-format
+msgid "%s failed"
+msgstr "%s 失敗。\n"
+
+#: sys-utils/ipcutils.c:505
+#, fuzzy, c-format
+msgid "%s (bytes) = "
+msgstr "%zd 位元組 ["
+
+#: sys-utils/ipcutils.c:507
+#, fuzzy, c-format
+msgid "%s (kbytes) = "
+msgstr "%zd 位元組 ["
+
+#: sys-utils/ldattach.c:184
+#, fuzzy
+msgid "invalid iflag"
+msgstr "無效的 iflag"
+
+#: sys-utils/ldattach.c:200
+#, fuzzy, c-format
+msgid " %s [options] <ldisc> <device>\n"
+msgstr " %s [選項] <ldisc><裝置>\n"
+
+#: sys-utils/ldattach.c:203
+msgid "Attach a line discipline to a serial line.\n"
+msgstr ""
+
+#: sys-utils/ldattach.c:206
+#, fuzzy
+msgid " -d, --debug print verbose messages to stderr\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/ldattach.c:207
+#, fuzzy
+msgid " -s, --speed <value> set serial line speed\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/ldattach.c:208
+msgid " -c, --intro-command <string> intro sent before ldattach\n"
+msgstr ""
+
+#: sys-utils/ldattach.c:209
+msgid " -p, --pause <seconds> pause between intro and ldattach\n"
+msgstr ""
+
+#: sys-utils/ldattach.c:210
+#, fuzzy
+msgid " -7, --sevenbits set character size to 7 bits\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+
+#: sys-utils/ldattach.c:211
+#, fuzzy
+msgid " -8, --eightbits set character size to 8 bits\n"
+msgstr " -8, --eightbits 設定字元大小到 8 位元\n"
+
+#: sys-utils/ldattach.c:212
+#, fuzzy
+msgid " -n, --noparity set parity to none\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/ldattach.c:213
+#, fuzzy
+msgid " -e, --evenparity set parity to even\n"
+msgstr " -e, --evenparity 設定同位到甚至\n"
+
+#: sys-utils/ldattach.c:214
+#, fuzzy
+msgid " -o, --oddparity set parity to odd\n"
+msgstr " -o, --oddparity 設定同位到奇數\n"
+
+#: sys-utils/ldattach.c:215
+#, fuzzy
+msgid " -1, --onestopbit set stop bits to one\n"
+msgstr " -1, --onestopbit 設定停止位元到一個\n"
+
+#: sys-utils/ldattach.c:216
+#, fuzzy
+msgid " -2, --twostopbits set stop bits to two\n"
+msgstr " -2, --twostopbits 設定停止位元到兩\n"
+
+#: sys-utils/ldattach.c:217
+#, fuzzy
+msgid " -i, --iflag [-]<iflag> set input mode flag\n"
+msgstr " -i, --iflag [-]<iflag> 設定輸入模式旗標\n"
+
+#: sys-utils/ldattach.c:222
+msgid ""
+"\n"
+"Known <ldisc> names:\n"
+msgstr ""
+"\n"
+"已知 <ldisc> 名稱：\n"
+
+#: sys-utils/ldattach.c:226
+msgid ""
+"\n"
+"Known <iflag> names:\n"
+msgstr ""
+"\n"
+"已知 <iflag> 名稱：\n"
+
+#: sys-utils/ldattach.c:344
+#, fuzzy
+msgid "invalid speed argument"
+msgstr "無效的速度引數"
+
+#: sys-utils/ldattach.c:347
+#, fuzzy
+msgid "invalid pause argument"
+msgstr "無效的前端引數"
+
+#: sys-utils/ldattach.c:374
+#, fuzzy
+msgid "invalid line discipline argument"
+msgstr "無效的列規律引數"
+
+#: sys-utils/ldattach.c:394
+#, c-format
+msgid "%s is not a serial line"
+msgstr "%s 並非序列線路"
+
+#: sys-utils/ldattach.c:401
+#, c-format
+msgid "cannot get terminal attributes for %s"
+msgstr "無法取得終端機屬性用於 %s"
+
+#: sys-utils/ldattach.c:404
+#, c-format
+msgid "speed %d unsupported"
+msgstr "速度 %d 不受支援"
+
+#: sys-utils/ldattach.c:453
+#, c-format
+msgid "cannot set terminal attributes for %s"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: sys-utils/ldattach.c:463
+#, fuzzy, c-format
+msgid "cannot write intro command to %s"
+msgstr "無法寫入 %s"
+
+#: sys-utils/ldattach.c:473
+msgid "cannot set line discipline"
+msgstr "無法設定線路規律"
+
+#: sys-utils/ldattach.c:483
+msgid "cannot daemonize"
+msgstr "無法守護程式化"
+
+#: sys-utils/losetup.c:72
+msgid "autoclear flag set"
+msgstr ""
+
+#: sys-utils/losetup.c:73
+#, fuzzy
+msgid "device backing file"
+msgstr "裝置識別碼"
+
+#: sys-utils/losetup.c:74
+#, fuzzy
+msgid "backing file inode number"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/losetup.c:75
+#, fuzzy
+msgid "backing file major:minor device number"
+msgstr "主要的：次級裝置數字"
+
+#: sys-utils/losetup.c:76
+#, fuzzy
+msgid "loop device name"
+msgstr "裝置名稱"
+
+#: sys-utils/losetup.c:77
+msgid "offset from the beginning"
+msgstr ""
+
+#: sys-utils/losetup.c:78
+#, fuzzy
+msgid "partscan flag set"
+msgstr "分割旗標"
+
+#: sys-utils/losetup.c:80
+#, fuzzy
+msgid "size limit of the file in bytes"
+msgstr "提取對齊偏移在中位元組"
+
+#: sys-utils/losetup.c:81
+#, fuzzy
+msgid "loop device major:minor number"
+msgstr "主要的：次級裝置數字"
+
+#: sys-utils/losetup.c:82
+msgid "access backing file with direct-io"
+msgstr ""
+
+#: sys-utils/losetup.c:83
+#, fuzzy
+msgid "logical sector size in bytes"
+msgstr "邏輯區大小"
+
+#: sys-utils/losetup.c:140 sys-utils/losetup.c:151
+#, fuzzy, c-format
+msgid ", offset %ju"
+msgstr "，偏移 %ju"
+
+#: sys-utils/losetup.c:143 sys-utils/losetup.c:154
+#, fuzzy, c-format
+msgid ", sizelimit %ju"
+msgstr "，sizelimit %ju"
+
+#: sys-utils/losetup.c:162
+#, fuzzy, c-format
+msgid ", encryption %s (type %u)"
+msgstr "，加密 %s (型態 %u)"
+
+#: sys-utils/losetup.c:206
+#, fuzzy, c-format
+msgid "%s: detach failed"
+msgstr "%s：卸離失敗"
+
+#: sys-utils/losetup.c:401
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] [<loopdev>]\n"
+" %1$s [options] -f | <loopdev> <file>\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
+
+#: sys-utils/losetup.c:406
+msgid "Set up and control loop devices.\n"
+msgstr ""
+
+#: sys-utils/losetup.c:410
+#, fuzzy
+msgid " -a, --all list all used devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/losetup.c:411
+msgid " -d, --detach <loopdev>... detach one or more devices\n"
+msgstr ""
+
+#: sys-utils/losetup.c:412
+#, fuzzy
+msgid " -D, --detach-all detach all used devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/losetup.c:413
+#, fuzzy
+msgid " -f, --find find first unused device\n"
+msgstr " -h, --help 這個小用法指導\n"
+
+#: sys-utils/losetup.c:414
+msgid " -c, --set-capacity <loopdev> resize the device\n"
+msgstr ""
+
+#: sys-utils/losetup.c:415
+msgid " -j, --associated <file> list all devices associated with <file>\n"
+msgstr ""
+
+#: sys-utils/losetup.c:416
+#, fuzzy
+msgid " -L, --nooverlap avoid possible conflict between devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/losetup.c:420
+#, fuzzy
+msgid " -o, --offset <num> start at offset <num> into file\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/losetup.c:421
+#, fuzzy
+msgid " --sizelimit <num> device is limited to <num> bytes of the file\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/losetup.c:422
+#, fuzzy
+msgid " -b, --sector-size <num> set the logical sector size to <num>\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
+
+#: sys-utils/losetup.c:423
+#, fuzzy
+msgid " -P, --partscan create a partitioned loop device\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/losetup.c:424
+#, fuzzy
+msgid " -r, --read-only set up a read-only loop device\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/losetup.c:425
+msgid " --direct-io[=<on|off>] open backing file with O_DIRECT\n"
+msgstr ""
+
+#: sys-utils/losetup.c:426
+msgid " --show print device name after setup (with -f)\n"
+msgstr ""
+
+#: sys-utils/losetup.c:427
+#, fuzzy
+msgid " -v, --verbose verbose mode\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/losetup.c:431
+#, fuzzy
+msgid " -J, --json use JSON --list output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/losetup.c:432
+#, fuzzy
+msgid " -l, --list list info about all or specified (default)\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
+
+#: sys-utils/losetup.c:433
+#, fuzzy
+msgid " -n, --noheadings don't print headings for --list output\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/losetup.c:434
+msgid " -O, --output <cols> specify columns to output for --list\n"
+msgstr ""
+
+#: sys-utils/losetup.c:435
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/losetup.c:436
+#, fuzzy
+msgid " --raw use raw --list output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/losetup.c:464
+#, fuzzy, c-format
+msgid "%s: Warning: file is smaller than 512 bytes; the loop device may be useless or invisible for system tools."
+msgstr "%s：警告：檔案小於 512 位元組，迴圈裝置也許是無用的或隱形的用於系統工具。"
+
+#: sys-utils/losetup.c:468
+#, fuzzy, c-format
+msgid "%s: Warning: file does not fit into a 512-byte sector; the end of the file will be ignored."
+msgstr "%s：警告：檔案不符合進入 512-byte 磁區結束的檔案將被忽略。"
+
+#: sys-utils/losetup.c:490 sys-utils/losetup.c:542
+#, fuzzy, c-format
+msgid "%s: overlapping loop device exists"
+msgstr "%s 不是 lp 裝置"
+
+#: sys-utils/losetup.c:501
+#, c-format
+msgid "%s: overlapping read-only loop device exists"
+msgstr ""
+
+#: sys-utils/losetup.c:508
+#, c-format
+msgid "%s: overlapping encrypted loop device exists"
+msgstr ""
+
+#: sys-utils/losetup.c:514
+#, fuzzy, c-format
+msgid "%s: failed to re-use loop device"
+msgstr "%s：無法設定迴圈裝置"
+
+#: sys-utils/losetup.c:520
+#, fuzzy
+msgid "failed to inspect loop devices"
+msgstr "%s：無法設定迴圈裝置"
+
+#: sys-utils/losetup.c:543
+#, fuzzy, c-format
+msgid "%s: failed to check for conflicting loop devices"
+msgstr "%s：無法設定迴圈裝置"
+
+#: sys-utils/losetup.c:555 sys-utils/losetup.c:875
+#, fuzzy
+msgid "cannot find an unused loop device"
+msgstr "找不到未使用的裝置"
+
+#: sys-utils/losetup.c:568
+#, fuzzy, c-format
+msgid "%s: failed to use backing file"
+msgstr "%s：無法使用上一步檔案"
+
+#: sys-utils/losetup.c:661
+#, fuzzy
+msgid "failed to parse logical block size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/losetup.c:667 sys-utils/losetup.c:677 sys-utils/losetup.c:801
+#: sys-utils/losetup.c:815 sys-utils/losetup.c:855
+#, fuzzy, c-format
+msgid "%s: failed to use device"
+msgstr "%s：無法使用裝置"
+
+#: sys-utils/losetup.c:812
+#, fuzzy
+msgid "no loop device specified"
+msgstr "沒有迴圈裝置指定的"
+
+#: sys-utils/losetup.c:827
+#, fuzzy, c-format
+msgid "the options %s are allowed during loop device setup only"
+msgstr "選項 %s 被允許到迴圈裝置設定只有"
+
+#: sys-utils/losetup.c:832
+#, fuzzy
+msgid "the option --offset is not allowed in this context"
+msgstr "選項 --offset 未被允許在中這個語境。"
+
+#: sys-utils/losetup.c:896
+#, fuzzy, c-format
+msgid "%s: set capacity failed"
+msgstr "%s：設定容量失敗"
+
+#: sys-utils/losetup.c:903
+#, fuzzy, c-format
+msgid "%s: set direct io failed"
+msgstr "%s：變更目錄失敗"
+
+#: sys-utils/losetup.c:909
+#, fuzzy, c-format
+msgid "%s: set logical block size failed"
+msgstr "%s：取得大小時失敗"
+
+#: sys-utils/lscpu.c:86
+msgid "none"
+msgstr "無"
+
+#: sys-utils/lscpu.c:87
+msgid "para"
+msgstr "部分"
+
+#: sys-utils/lscpu.c:88
+msgid "full"
+msgstr "全部"
+
+#: sys-utils/lscpu.c:89
+msgid "container"
+msgstr ""
+
+#: sys-utils/lscpu.c:132
+#, fuzzy
+msgid "horizontal"
+msgstr "水平"
+
+#: sys-utils/lscpu.c:133
+#, fuzzy
+msgid "vertical"
+msgstr "垂直"
+
+#: sys-utils/lscpu.c:201
+#, fuzzy
+msgid "logical CPU number"
+msgstr "邏輯的 CPU 數字"
+
+#: sys-utils/lscpu.c:202
+#, fuzzy
+msgid "logical core number"
+msgstr "邏輯的核心數字"
+
+#: sys-utils/lscpu.c:203
+#, fuzzy
+msgid "logical socket number"
+msgstr "邏輯的通訊端數字"
+
+#: sys-utils/lscpu.c:204
+#, fuzzy
+msgid "logical NUMA node number"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/lscpu.c:205
+#, fuzzy
+msgid "logical book number"
+msgstr "邏輯的書籍數字"
+
+#: sys-utils/lscpu.c:206
+#, fuzzy
+msgid "logical drawer number"
+msgstr "邏輯的核心數字"
+
+#: sys-utils/lscpu.c:207
+#, fuzzy
+msgid "shows how caches are shared between CPUs"
+msgstr "顯示如何 caches 被共享介於 CPUs"
+
+#: sys-utils/lscpu.c:208
+#, fuzzy
+msgid "CPU dispatching mode on virtual hardware"
+msgstr "CPU 派送模式於虛擬硬體"
+
+#: sys-utils/lscpu.c:209
+#, fuzzy
+msgid "physical address of a CPU"
+msgstr "實體位址的 CPU"
+
+#: sys-utils/lscpu.c:210
+#, fuzzy
+msgid "shows if the hypervisor has allocated the CPU"
+msgstr "顯示如果 hypervisor 已配置 CPU"
+
+#: sys-utils/lscpu.c:211
+#, fuzzy
+msgid "shows if Linux currently makes use of the CPU"
+msgstr "顯示如果 Linux 目前利用 CPU"
+
+#: sys-utils/lscpu.c:212
+msgid "shows the maximum MHz of the CPU"
+msgstr ""
+
+#: sys-utils/lscpu.c:213
+msgid "shows the minimum MHz of the CPU"
+msgstr ""
+
+#: sys-utils/lscpu.c:218
+#, fuzzy
+msgid "size of all system caches"
+msgstr "設定檔案系統預先讀取"
+
+#: sys-utils/lscpu.c:219
+msgid "cache level"
+msgstr ""
+
+#: sys-utils/lscpu.c:220
+#, fuzzy
+msgid "cache name"
+msgstr "裝置名稱"
+
+#: sys-utils/lscpu.c:221
+#, fuzzy
+msgid "size of one cache"
+msgstr "大小的裝置"
+
+#: sys-utils/lscpu.c:222
+#, fuzzy
+msgid "cache type"
+msgstr "分割區編號"
+
+#: sys-utils/lscpu.c:223
+msgid "ways of associativity"
+msgstr ""
+
+#: sys-utils/lscpu.c:224
+msgid "allocation policy"
+msgstr ""
+
+#: sys-utils/lscpu.c:225
+#, fuzzy
+msgid "write policy"
+msgstr "寫入錯誤"
+
+#: sys-utils/lscpu.c:226
+#, fuzzy
+msgid "number of physical cache line per cache t"
+msgstr "實體磁柱數量"
+
+#: sys-utils/lscpu.c:227
+msgid "number of sets in the cache; set lines has the same cache index"
+msgstr ""
+
+#: sys-utils/lscpu.c:228
+msgid "minimum amount of data in bytes transferred from memory to cache"
+msgstr ""
+
+#: sys-utils/lscpu.c:523
+msgid "error: uname failed"
+msgstr "錯誤：uname 失敗"
+
+#: sys-utils/lscpu.c:615
+#, fuzzy, c-format
+msgid "failed to determine number of CPUs: %s"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/lscpu.c:883
+#, fuzzy
+msgid "cannot restore signal handler"
+msgstr "無法設定信號處理程式"
+
+#: sys-utils/lscpu.c:1454
+#, fuzzy
+msgid "Failed to extract the node number"
+msgstr "%s：無法提取分割區編號"
+
+#: sys-utils/lscpu.c:1581 sys-utils/lscpu.c:1591
+#, fuzzy
+msgid "Y"
+msgstr "Y"
+
+#: sys-utils/lscpu.c:1581 sys-utils/lscpu.c:1591
+#, fuzzy
+msgid "N"
+msgstr "N"
+
+#: sys-utils/lscpu.c:1783
+#, fuzzy, c-format
+msgid ""
+"# The following is the parsable format, which can be fed to other\n"
+"# programs. Each different item in every column has an unique ID\n"
+"# starting from zero.\n"
+msgstr ""
+"# 下列是 parsable 格式，該項可以被 fed 到其他\n"
+"# 程式。每個不同的項目在中每欄有唯一識別號\n"
+"# 開始從零。\n"
+
+#: sys-utils/lscpu.c:2011
+msgid "Architecture:"
+msgstr "架構："
+
+#: sys-utils/lscpu.c:2024
+msgid "CPU op-mode(s):"
+msgstr "CPU 作業模式："
+
+#: sys-utils/lscpu.c:2027 sys-utils/lscpu.c:2029
+#, fuzzy
+msgid "Byte Order:"
+msgstr "位元組次序："
+
+#: sys-utils/lscpu.c:2033
+msgid "Address sizes:"
+msgstr ""
+
+#: sys-utils/lscpu.c:2035
+#, fuzzy
+msgid "CPU(s):"
+msgstr "CPU (s)："
+
+#: sys-utils/lscpu.c:2038
+#, fuzzy
+msgid "On-line CPU(s) mask:"
+msgstr "線上 CPU (s) 遮罩："
+
+#: sys-utils/lscpu.c:2039
+#, fuzzy
+msgid "On-line CPU(s) list:"
+msgstr "線上 CPU (s) 清單："
+
+#: sys-utils/lscpu.c:2051
+msgid "failed to callocate cpu set"
+msgstr "callocate cpu 集合時失敗"
+
+#: sys-utils/lscpu.c:2058
+#, fuzzy
+msgid "Off-line CPU(s) mask:"
+msgstr "離線 CPU (s) 遮罩："
+
+#: sys-utils/lscpu.c:2059
+#, fuzzy
+msgid "Off-line CPU(s) list:"
+msgstr "離線 CPU (s) 清單："
+
+#: sys-utils/lscpu.c:2094
+msgid "Thread(s) per core:"
+msgstr "每核心執行緒數："
+
+#: sys-utils/lscpu.c:2096
+msgid "Core(s) per socket:"
+msgstr "每通訊端核心數："
+
+#: sys-utils/lscpu.c:2099
+#, fuzzy
+msgid "Socket(s) per book:"
+msgstr "通訊端各書籍："
+
+#: sys-utils/lscpu.c:2102
+msgid "Book(s) per drawer:"
+msgstr ""
+
+#: sys-utils/lscpu.c:2104
+msgid "Drawer(s):"
+msgstr ""
+
+#: sys-utils/lscpu.c:2106
+#, fuzzy
+msgid "Book(s):"
+msgstr "書籍："
+
+#: sys-utils/lscpu.c:2109
+#, fuzzy
+msgid "Socket(s):"
+msgstr "通訊端："
+
+#: sys-utils/lscpu.c:2113
+msgid "NUMA node(s):"
+msgstr "NUMA 節點："
+
+#: sys-utils/lscpu.c:2115
+msgid "Vendor ID:"
+msgstr "供應商識別號："
+
+#: sys-utils/lscpu.c:2117
+#, fuzzy
+msgid "Machine type:"
+msgstr "分割區編號"
+
+#: sys-utils/lscpu.c:2119
+msgid "CPU family:"
+msgstr "CPU 家族："
+
+#: sys-utils/lscpu.c:2121
+msgid "Model:"
+msgstr "型號："
+
+#: sys-utils/lscpu.c:2123
+#, fuzzy
+msgid "Model name:"
+msgstr "型號："
+
+#: sys-utils/lscpu.c:2125
+msgid "Stepping:"
+msgstr "製程："
+
+#: sys-utils/lscpu.c:2127
+#, fuzzy
+msgid "Frequency boost:"
+msgstr "FreeBSD"
+
+#: sys-utils/lscpu.c:2128
+#, fuzzy
+msgid "enabled"
+msgstr "CPU %d 已啟用\n"
+
+#: sys-utils/lscpu.c:2128
+#, fuzzy
+msgid "disabled"
+msgstr "CPU %d 已停用\n"
+
+#: sys-utils/lscpu.c:2130
+msgid "CPU MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:2132
+#, fuzzy
+msgid "CPU dynamic MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:2134
+#, fuzzy
+msgid "CPU static MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:2136
+#, fuzzy
+msgid "CPU max MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:2138
+#, fuzzy
+msgid "CPU min MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:2140
+#, fuzzy
+msgid "BogoMIPS:"
+msgstr "BogoMIPS："
+
+#: sys-utils/lscpu.c:2143 sys-utils/lscpu.c:2145
+msgid "Virtualization:"
+msgstr "虛擬："
+
+#: sys-utils/lscpu.c:2148
+#, fuzzy
+msgid "Hypervisor:"
+msgstr "Hypervisor："
+
+#: sys-utils/lscpu.c:2150
+msgid "Hypervisor vendor:"
+msgstr "Hypervisor 供應商："
+
+#: sys-utils/lscpu.c:2151
+msgid "Virtualization type:"
+msgstr "虛擬型態："
+
+#: sys-utils/lscpu.c:2154
+#, fuzzy
+msgid "Dispatching mode:"
+msgstr "派送模式："
+
+#: sys-utils/lscpu.c:2171 sys-utils/lscpu.c:2189
+#, fuzzy, c-format
+msgid "%s cache:"
+msgstr "%s 快取："
+
+#: sys-utils/lscpu.c:2196
+#, c-format
+msgid "NUMA node%d CPU(s):"
+msgstr "NUMA node%d CPU(s)："
+
+#: sys-utils/lscpu.c:2201
+#, fuzzy
+msgid "Physical sockets:"
+msgstr "實體磁柱數量"
+
+#: sys-utils/lscpu.c:2202
+#, fuzzy
+msgid "Physical chips:"
+msgstr "實體磁柱數量"
+
+#: sys-utils/lscpu.c:2203
+#, fuzzy
+msgid "Physical cores/chip:"
+msgstr "實體磁區大小"
+
+#: sys-utils/lscpu.c:2214
+#, fuzzy
+msgid "Flags:"
+msgstr "屬性旗標"
+
+#: sys-utils/lscpu.c:2229
+msgid "Display information about the CPU architecture.\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:2232
+#, fuzzy
+msgid " -a, --all print both online and offline CPUs (default for -e)\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/lscpu.c:2233
+#, fuzzy
+msgid " -b, --online print online CPUs only (default for -p)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/lscpu.c:2234
+#, fuzzy
+msgid " -B, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/lscpu.c:2235
+msgid " -C, --caches[=<list>] info about caches in extended readable format\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:2236
+#, fuzzy
+msgid " -c, --offline print offline CPUs only\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/lscpu.c:2237
+#, fuzzy
+msgid " -J, --json use JSON for default or extended format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/lscpu.c:2238
+msgid " -e, --extended[=<list>] print out an extended readable format\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:2239
+msgid " -p, --parse[=<list>] print out a parsable format\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:2240
+msgid " -s, --sysroot <dir> use specified directory as system root\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:2241
+#, fuzzy
+msgid " -x, --hex print hexadecimal masks rather than lists of CPUs\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/lscpu.c:2242
+#, fuzzy
+msgid " -y, --physical print physical instead of logical IDs\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/lscpu.c:2243
+#, fuzzy
+msgid " --output-all print all available columns for -e, -p or -C\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/lscpu.c:2247
+#, fuzzy
+msgid ""
+"\n"
+"Available output columns for -e or -p:\n"
+msgstr ""
+"\n"
+"可用欄位：\n"
+
+#: sys-utils/lscpu.c:2251
+#, fuzzy
+msgid ""
+"\n"
+"Available output columns for -C:\n"
+msgstr ""
+"\n"
+"可用欄位：\n"
+
+#: sys-utils/lscpu.c:2384
+#, fuzzy, c-format
+msgid "%s: options --all, --online and --offline may only be used with options --extended or --parse.\n"
+msgstr "%s：選項 --all，--online 和 --offline 也許會只有被使用與選項 --extended 或 --parsable。\n"
+
+#: sys-utils/lscpu.c:2406
+#, fuzzy
+msgid "failed to initialize CPUs sysfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
+
+#: sys-utils/lscpu.c:2413
+#, fuzzy
+msgid "failed to initialize procfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
+
+#: sys-utils/lsipc.c:149
+#, fuzzy
+msgid "Resource key"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:149
+#, fuzzy
+msgid "Key"
+msgstr "鍵值"
+
+#: sys-utils/lsipc.c:150
+#, fuzzy
+msgid "Resource ID"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:150
+msgid "ID"
+msgstr ""
+
+#: sys-utils/lsipc.c:151
+msgid "Owner's username or UID"
+msgstr ""
+
+#: sys-utils/lsipc.c:151
+#, fuzzy
+msgid "Owner"
+msgstr "擁有者"
+
+#: sys-utils/lsipc.c:152
+#, fuzzy
+msgid "Permissions"
+msgstr "權限被拒"
+
+#: sys-utils/lsipc.c:153
+msgid "Creator UID"
+msgstr ""
+
+#: sys-utils/lsipc.c:154
+msgid "Creator user"
+msgstr ""
+
+#: sys-utils/lsipc.c:155
+msgid "Creator GID"
+msgstr ""
+
+#: sys-utils/lsipc.c:156
+#, fuzzy
+msgid "Creator group"
+msgstr "主要的"
+
+#: sys-utils/lsipc.c:157
+#, fuzzy
+msgid "User ID"
+msgstr "使用者識別號"
+
+#: sys-utils/lsipc.c:157
+msgid "UID"
+msgstr ""
+
+#: sys-utils/lsipc.c:158
+#, fuzzy
+msgid "User name"
+msgstr "使用者名稱"
+
+#: sys-utils/lsipc.c:159
+msgid "Group ID"
+msgstr ""
+
+#: sys-utils/lsipc.c:159
+#, fuzzy
+msgid "GID"
+msgstr "SGI raw"
+
+#: sys-utils/lsipc.c:160
+#, fuzzy
+msgid "Group name"
+msgstr "群組名稱"
+
+#: sys-utils/lsipc.c:161
+#, fuzzy
+msgid "Time of the last change"
+msgstr "大小的交換區域"
+
+#: sys-utils/lsipc.c:161
+#, fuzzy
+msgid "Last change"
+msgstr "最後變更者"
+
+#: sys-utils/lsipc.c:164
+#, fuzzy
+msgid "Bytes used"
+msgstr "位元組在中使用"
+
+#: sys-utils/lsipc.c:165
+#, fuzzy
+msgid "Number of messages"
+msgstr "磁頭數量"
+
+#: sys-utils/lsipc.c:165
+#, fuzzy
+msgid "Messages"
+msgstr "訊息"
+
+#: sys-utils/lsipc.c:166
+#, fuzzy
+msgid "Time of last msg sent"
+msgstr "略過第一列"
+
+#: sys-utils/lsipc.c:166
+msgid "Msg sent"
+msgstr ""
+
+#: sys-utils/lsipc.c:167
+msgid "Time of last msg received"
+msgstr ""
+
+#: sys-utils/lsipc.c:167
+msgid "Msg received"
+msgstr ""
+
+#: sys-utils/lsipc.c:168
+msgid "PID of the last msg sender"
+msgstr ""
+
+#: sys-utils/lsipc.c:168
+msgid "Msg sender"
+msgstr ""
+
+#: sys-utils/lsipc.c:169
+msgid "PID of the last msg receiver"
+msgstr ""
+
+#: sys-utils/lsipc.c:169
+msgid "Msg receiver"
+msgstr ""
+
+#: sys-utils/lsipc.c:172
+#, fuzzy
+msgid "Segment size"
+msgstr "取得區塊大小"
+
+#: sys-utils/lsipc.c:173
+#, fuzzy
+msgid "Number of attached processes"
+msgstr "最大行程數量"
+
+#: sys-utils/lsipc.c:173
+msgid "Attached processes"
+msgstr ""
+
+#: sys-utils/lsipc.c:174
+#, fuzzy
+msgid "Status"
+msgstr "狀態"
+
+#: sys-utils/lsipc.c:175
+#, fuzzy
+msgid "Attach time"
+msgstr "已附加"
+
+#: sys-utils/lsipc.c:176
+#, fuzzy
+msgid "Detach time"
+msgstr "已卸離"
+
+#: sys-utils/lsipc.c:177
+#, fuzzy
+msgid "Creator command line"
+msgstr "所有掛載選項"
+
+#: sys-utils/lsipc.c:177
+#, fuzzy
+msgid "Creator command"
+msgstr "無效的命令"
+
+#: sys-utils/lsipc.c:178
+msgid "PID of the creator"
+msgstr ""
+
+#: sys-utils/lsipc.c:178
+msgid "Creator PID"
+msgstr ""
+
+#: sys-utils/lsipc.c:179
+msgid "PID of last user"
+msgstr ""
+
+#: sys-utils/lsipc.c:179
+#, fuzzy
+msgid "Last user PID"
+msgstr "使用者識別號"
+
+#: sys-utils/lsipc.c:182
+#, fuzzy
+msgid "Number of semaphores"
+msgstr "磁區數量"
+
+#: sys-utils/lsipc.c:182
+#, fuzzy
+msgid "Semaphores"
+msgstr "號誌識別號：%d\n"
+
+#: sys-utils/lsipc.c:183
+msgid "Time of the last operation"
+msgstr ""
+
+#: sys-utils/lsipc.c:183
+#, fuzzy
+msgid "Last operation"
+msgstr "操作 %d\n"
+
+#: sys-utils/lsipc.c:186
+#, fuzzy
+msgid "Resource name"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:186
+#, fuzzy
+msgid "Resource"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:187
+#, fuzzy
+msgid "Resource description"
+msgstr "資源描述"
+
+#: sys-utils/lsipc.c:187
+#, fuzzy
+msgid "Description"
+msgstr "旗標描述"
+
+#: sys-utils/lsipc.c:188
+msgid "Currently used"
+msgstr ""
+
+#: sys-utils/lsipc.c:188
+msgid "Used"
+msgstr ""
+
+#: sys-utils/lsipc.c:189
+#, fuzzy
+msgid "Currently use percentage"
+msgstr "檔案系統使用百分比"
+
+#: sys-utils/lsipc.c:189
+#, fuzzy
+msgid "Use"
+msgstr "用法："
+
+#: sys-utils/lsipc.c:190
+msgid "System-wide limit"
+msgstr ""
+
+#: sys-utils/lsipc.c:190
+msgid "Limit"
+msgstr ""
+
+#: sys-utils/lsipc.c:225
+#, c-format
+msgid "column %s does not apply to the specified IPC"
+msgstr ""
+
+#: sys-utils/lsipc.c:301
+msgid " -g, --global info about system-wide usage (may be used with -m, -q and -s)\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:302
+#, fuzzy
+msgid " -i, --id <id> print details on resource identified by <id>\n"
+msgstr " -i, --id <id> 列印細節於資源識別的由識別號\n"
+
+#: sys-utils/lsipc.c:308
+#, fuzzy
+msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/lsipc.c:309
+#, fuzzy
+msgid " -c, --creator show creator and owner\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
+
+#: sys-utils/lsipc.c:311
+#, fuzzy
+msgid " -J, --json use the JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/lsipc.c:313
+#, fuzzy
+msgid " -l, --list force list output format (for example with --id)\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
+
+#: sys-utils/lsipc.c:315
+msgid " -P, --numeric-perms print numeric permissions (PERMS column)\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:317
+#, fuzzy
+msgid " -t, --time show attach, detach and change times\n"
+msgstr " -t, --time 顯示附加、卸離和變更次\n"
+
+#: sys-utils/lsipc.c:322
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Generic columns:\n"
+msgstr ""
+"\n"
+"一般選項：\n"
+
+#: sys-utils/lsipc.c:326
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Shared-memory columns (--shmems):\n"
+msgstr ""
+"\n"
+"共用記憶體資料段 shmid = %d\n"
+
+#: sys-utils/lsipc.c:330
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Message-queue columns (--queues):\n"
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/lsipc.c:334
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Semaphore columns (--semaphores):\n"
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/lsipc.c:338
+#, c-format
+msgid ""
+"\n"
+"Summary columns (--global):\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:424
+#, c-format
+msgid ""
+"Elements:\n"
+"\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:697 sys-utils/lsipc.c:858 sys-utils/lsipc.c:1057
+#, fuzzy
+msgid "failed to set data"
+msgstr "設定路徑時失敗"
+
+#: sys-utils/lsipc.c:722
+#, fuzzy
+msgid "Number of semaphore identifiers"
+msgstr "磁區數量"
+
+#: sys-utils/lsipc.c:723
+#, fuzzy
+msgid "Total number of semaphores"
+msgstr "磁區數量"
+
+#: sys-utils/lsipc.c:724
+#, fuzzy
+msgid "Max semaphores per semaphore set."
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/lsipc.c:725
+#, fuzzy
+msgid "Max number of operations per semop(2)"
+msgstr "最大開啟檔案數量"
+
+#: sys-utils/lsipc.c:726
+#, fuzzy
+msgid "Semaphore max value"
+msgstr "號誌最大值 = %d\n"
+
+#: sys-utils/lsipc.c:883
+#, fuzzy
+msgid "Number of message queues"
+msgstr "磁頭數量"
+
+#: sys-utils/lsipc.c:884
+#, fuzzy
+msgid "Max size of message (bytes)"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:885
+#, fuzzy
+msgid "Default max size of queue (bytes)"
+msgstr "預設佇列最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:999 sys-utils/lsipc.c:1018
+msgid "hugetlb"
+msgstr ""
+
+#: sys-utils/lsipc.c:1000 sys-utils/lsipc.c:1025
+#, fuzzy
+msgid "noreserve"
+msgstr "SunOS 保留區"
+
+#: sys-utils/lsipc.c:1082
+#, fuzzy
+msgid "Shared memory segments"
+msgstr ""
+"\n"
+"共用記憶體資料段 shmid = %d\n"
+
+#: sys-utils/lsipc.c:1083
+#, fuzzy
+msgid "Shared memory pages"
+msgstr "共用記憶體識別號：%d\n"
+
+#: sys-utils/lsipc.c:1084
+#, fuzzy
+msgid "Max size of shared memory segment (bytes)"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:1085
+#, fuzzy
+msgid "Min size of shared memory segment (bytes)"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:1155
+#, fuzzy
+msgid "failed to parse IPC identifier"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/lsipc.c:1249
+#, fuzzy
+msgid "--global is mutually exclusive with --creator, --id and --time"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/lsmem.c:126
+msgid "start and end address of the memory range"
+msgstr ""
+
+#: sys-utils/lsmem.c:127
+#, fuzzy
+msgid "size of the memory range"
+msgstr "大小的裝置"
+
+#: sys-utils/lsmem.c:128
+msgid "online status of the memory range"
+msgstr ""
+
+#: sys-utils/lsmem.c:129
+#, fuzzy
+msgid "memory is removable"
+msgstr " 可移除的"
+
+#: sys-utils/lsmem.c:130
+msgid "memory block number or blocks range"
+msgstr ""
+
+#: sys-utils/lsmem.c:131
+#, fuzzy
+msgid "numa node of memory"
+msgstr "記憶體不足"
+
+#: sys-utils/lsmem.c:132
+#, fuzzy
+msgid "valid zones for the memory range"
+msgstr "大小的裝置"
+
+#: sys-utils/lsmem.c:259
+#, fuzzy
+msgid "online"
+msgstr "，上線"
+
+#: sys-utils/lsmem.c:260
+#, fuzzy
+msgid "offline"
+msgstr "，上線"
+
+#: sys-utils/lsmem.c:261
+msgid "on->off"
+msgstr ""
+
+#: sys-utils/lsmem.c:315 sys-utils/lsmem.c:322
+#, fuzzy
+msgid "Memory block size:"
+msgstr "取得區塊大小"
+
+#: sys-utils/lsmem.c:316 sys-utils/lsmem.c:326
+#, fuzzy
+msgid "Total online memory:"
+msgstr "記憶體不足"
+
+#: sys-utils/lsmem.c:317 sys-utils/lsmem.c:330
+#, fuzzy
+msgid "Total offline memory:"
+msgstr "記憶體不足"
+
+#: sys-utils/lsmem.c:343
+#, fuzzy, c-format
+msgid "Failed to open %s"
+msgstr "無法開啟 %s"
+
+#: sys-utils/lsmem.c:441
+#, fuzzy
+msgid "failed to read memory block size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/lsmem.c:472
+#, fuzzy
+msgid "This system does not support memory blocks"
+msgstr "這個系統不支援重新掃描的 CPUs"
+
+#: sys-utils/lsmem.c:497
+msgid "List the ranges of available memory with their online status.\n"
+msgstr ""
+
+#: sys-utils/lsmem.c:502
+#, fuzzy
+msgid " -a, --all list each individual memory block\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/lsmem.c:508
+#, fuzzy
+msgid " -S, --split <list> split ranges by specified columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/lsmem.c:509
+#, fuzzy
+msgid " -s, --sysroot <dir> use the specified directory as system root\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/lsmem.c:510
+msgid " --summary[=when] print summary information (never,always or only)\n"
+msgstr ""
+
+#: sys-utils/lsmem.c:616
+#, fuzzy
+msgid "unsupported --summary argument"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/lsmem.c:636
+#, fuzzy
+msgid "options --{raw,json,pairs} and --summary=only are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/lsmem.c:644
+#, fuzzy
+msgid "invalid argument to --sysroot"
+msgstr "無效的引數：%s"
+
+#: sys-utils/lsmem.c:675 sys-utils/lsns.c:781
+msgid "failed to initialize output table"
+msgstr "初始化輸出表格時失敗"
+
+#: sys-utils/lsmem.c:690
+#, fuzzy
+msgid "Failed to initialize output column"
+msgstr "初始化輸出欄時失敗"
+
+#: sys-utils/lsns.c:99
+#, fuzzy
+msgid "namespace identifier (inode number)"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/lsns.c:100
+msgid "kind of namespace"
+msgstr ""
+
+#: sys-utils/lsns.c:101
+#, fuzzy
+msgid "path to the namespace"
+msgstr "狀態的裝置"
+
+#: sys-utils/lsns.c:102
+#, fuzzy
+msgid "number of processes in the namespace"
+msgstr "最大行程數量"
+
+#: sys-utils/lsns.c:103
+msgid "lowest PID in the namespace"
+msgstr ""
+
+#: sys-utils/lsns.c:104
+msgid "PPID of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:105
+msgid "command line of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:106
+msgid "UID of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:107
+msgid "username of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:108
+msgid "namespace ID as used by network subsystem"
+msgstr ""
+
+#: sys-utils/lsns.c:109
+msgid "nsfs mountpoint (usually used network subsystem)"
+msgstr ""
+
+#: sys-utils/lsns.c:719
+msgid "failed to add line to output"
+msgstr "加入輸出列時失敗"
+
+#: sys-utils/lsns.c:898
+#, fuzzy, c-format
+msgid " %s [options] [<namespace>]\n"
+msgstr " %s [選項] [訊息]\n"
+
+#: sys-utils/lsns.c:901
+#, fuzzy
+msgid "List system namespaces.\n"
+msgstr "無法設定系統時鐘。\n"
+
+#: sys-utils/lsns.c:909
+#, fuzzy
+msgid " -p, --task <pid> print process namespaces\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/lsns.c:912
+#, fuzzy
+msgid " -W, --nowrap don't use multi-line representation\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/lsns.c:913
+msgid " -t, --type <name> namespace type (mnt, net, ipc, user, pid, uts, cgroup)\n"
+msgstr ""
+
+#: sys-utils/lsns.c:1007
+#, fuzzy, c-format
+msgid "unknown namespace type: %s"
+msgstr "不明的資源類型：%s\n"
+
+#: sys-utils/lsns.c:1036
+#, fuzzy
+msgid "--task is mutually exclusive with <namespace>"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/lsns.c:1037
+#, fuzzy
+msgid "invalid namespace argument"
+msgstr "無效的前端引數"
+
+#: sys-utils/lsns.c:1089
+#, c-format
+msgid "not found namespace: %ju"
+msgstr ""
+
+#: sys-utils/mount.c:65 sys-utils/umount.c:130
+#, fuzzy
+msgid "drop permissions failed."
+msgstr "權限被拒"
+
+#: sys-utils/mount.c:78 sys-utils/umount.c:64
+#, fuzzy, c-format
+msgid "%s from %s (libmount %s"
+msgstr "%s 從 %s (libmount %s"
+
+#: sys-utils/mount.c:123
+#, fuzzy
+msgid "failed to read mtab"
+msgstr "讀取 mtab 時失敗"
+
+#: sys-utils/mount.c:185 sys-utils/mount.c:252 sys-utils/umount.c:197
+#, fuzzy, c-format
+msgid "%-25s: ignored\n"
+msgstr "%-25s: 忽略\n"
+
+#: sys-utils/mount.c:186
+#, fuzzy, c-format
+msgid "%-25s: already mounted\n"
+msgstr "%-25s: 已經掛載\n"
+
+#: sys-utils/mount.c:293
+#, fuzzy, c-format
+msgid "%s: %s moved to %s.\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/mount.c:295
+#, fuzzy, c-format
+msgid "%s: %s bound on %s.\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/mount.c:298 sys-utils/mount.c:302
+#, fuzzy, c-format
+msgid "%s: %s mounted on %s.\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/mount.c:300
+#, c-format
+msgid "%s: %s propagation flags changed.\n"
+msgstr ""
+
+#: sys-utils/mount.c:320
+#, c-format
+msgid ""
+"mount: %s does not contain SELinux labels.\n"
+" You just mounted an file system that supports labels which does not\n"
+" contain labels, onto an SELinux box. It is likely that confined\n"
+" applications will generate AVC messages and not be allowed access to\n"
+" this file system. For more details see restorecon(8) and mount(8).\n"
+msgstr ""
+"mount：%s 不包含 SELinux 標籤。\n"
+" 您剛掛載了支援標籤的檔案系統，它卻在 SELinux 框上\n"
+" 不包含標籤。似乎受限的應用程式\n"
+" 將產生 AVC 訊息，並且不被允許去存取\n"
+" 這個檔案系統。要獲得更多細節請參看 restorecon(8) 和 mount(8)。\n"
+
+#: sys-utils/mount.c:378
+#, fuzzy, c-format
+msgid "%s: failed to parse"
+msgstr "%s：無法剖析"
+
+#: sys-utils/mount.c:418
+#, fuzzy, c-format
+msgid "unsupported option format: %s"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/mount.c:420
+#, fuzzy, c-format
+msgid "failed to append option '%s'"
+msgstr "附加選項時失敗"
+
+#: sys-utils/mount.c:438
+#, fuzzy, c-format
+msgid ""
+" %1$s [-lhV]\n"
+" %1$s -a [options]\n"
+" %1$s [options] [--source] <source> | [--target] <directory>\n"
+" %1$s [options] <source> <directory>\n"
+" %1$s <operation> <mountpoint> [<target>]\n"
+msgstr ""
+" %1$s [-lhV]\n"
+" %1$s -a [選項]\n"
+" %1$s [選項] [--source] <source>|[--target]<目錄>\n"
+" %1$s [選項]<來源><目錄>\n"
+" %1$s<作業><mountpoint>[<目標>]\n"
+
+#: sys-utils/mount.c:446
+#, fuzzy
+msgid "Mount a filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/mount.c:450
+#, fuzzy, c-format
+msgid ""
+" -a, --all mount all filesystems mentioned in fstab\n"
+" -c, --no-canonicalize don't canonicalize paths\n"
+" -f, --fake dry run; skip the mount(2) syscall\n"
+" -F, --fork fork off for each device (use with -a)\n"
+" -T, --fstab <path> alternative file to /etc/fstab\n"
+msgstr ""
+" -a, --all 掛載所有檔案系統提及的在中 fstab\n"
+" -c, --no-canonicalize 不正則化路徑\n"
+" -f, --fake 模擬測試；跳過掛載 (2) syscall\n"
+" -F, --fork 衍生關閉用於每個裝置 (使用與 -a)\n"
+" -T, --fstab <path> 替代方案檔案到/etc/fstab\n"
+
+#: sys-utils/mount.c:456
+#, c-format
+msgid " -i, --internal-only don't call the mount.<type> helpers\n"
+msgstr ""
+
+#: sys-utils/mount.c:458
+#, fuzzy, c-format
+msgid " -l, --show-labels show also filesystem labels\n"
+msgstr " -l, --limits 顯示資源限度\n"
+
+#: sys-utils/mount.c:460 sys-utils/umount.c:98
+#, fuzzy, c-format
+msgid " -n, --no-mtab don't write to /etc/mtab\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/mount.c:462
+#, c-format
+msgid ""
+" --options-mode <mode>\n"
+" what to do with options loaded from fstab\n"
+" --options-source <source>\n"
+" mount options source\n"
+" --options-source-force\n"
+" force use of options from fstab/mtab\n"
+msgstr ""
+
+#: sys-utils/mount.c:469
+#, fuzzy, c-format
+msgid ""
+" -o, --options <list> comma-separated list of mount options\n"
+" -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
+" -r, --read-only mount the filesystem read-only (same as -o ro)\n"
+" -t, --types <list> limit the set of filesystem types\n"
+msgstr ""
+" -o, --options <list> 以逗號分隔的掛載選項清單的\n"
+" -O, --test-opts<清單> 限制集合檔案系統 (使用與 -a)\n"
+" -p, --pass-fd<num> 讀取密語從檔案描述符號\n"
+" -r, --read-only 掛載檔案系統唯讀 (如同 -o ro)\n"
+" -t, --types<清單> 限制集合檔案系統類型\n"
+
+#: sys-utils/mount.c:474
+#, fuzzy, c-format
+msgid ""
+" --source <src> explicitly specifies source (path, label, uuid)\n"
+" --target <target> explicitly specifies mountpoint\n"
+msgstr ""
+" --source <src> 明確的指定來源 (路徑、標貼，uuid)\n"
+" --target<目標> 明確的指定 mountpoint\n"
+
+#: sys-utils/mount.c:477
+#, fuzzy, c-format
+msgid ""
+" --target-prefix <path>\n"
+" specifies path use for all mountpoints\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: sys-utils/mount.c:480 sys-utils/umount.c:104
+#, fuzzy, c-format
+msgid " -v, --verbose say what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: sys-utils/mount.c:482
+#, c-format
+msgid " -w, --rw, --read-write mount the filesystem read-write (default)\n"
+msgstr ""
+
+#: sys-utils/mount.c:484
+#, fuzzy, c-format
+msgid " -N, --namespace <ns> perform mount in another namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/mount.c:490
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Source:\n"
+" -L, --label <label> synonym for LABEL=<label>\n"
+" -U, --uuid <uuid> synonym for UUID=<uuid>\n"
+" LABEL=<label> specifies device by filesystem label\n"
+" UUID=<uuid> specifies device by filesystem UUID\n"
+" PARTLABEL=<label> specifies device by partition label\n"
+" PARTUUID=<uuid> specifies device by partition UUID\n"
+msgstr ""
+"\n"
+"來源：\n"
+" -L, --label <label> 同義字用於標貼=<標貼>\n"
+" -U, --uuid<uuid> 同義字用於 UUID=<uuid>\n"
+" 標貼=<標貼> 指定裝置由檔案系統標貼\n"
+" UUID=<uuid> 指定裝置由檔案系統 UUID\n"
+" PARTLABEL=<標貼> 指定裝置由分割標貼\n"
+" PARTUUID=<uuid> 指定裝置由分割 UUID\n"
+
+#: sys-utils/mount.c:499
+#, fuzzy, c-format
+msgid ""
+" <device> specifies device by path\n"
+" <directory> mountpoint for bind mounts (see --bind/rbind)\n"
+" <file> regular file for loopdev setup\n"
+msgstr ""
+" <device> 指定裝置由路徑\n"
+"<目錄> mountpoint 用於繫結掛載 (參看 --bind/rbind)\n"
+"<檔案> 標準檔案用於 loopdev 設定\n"
+
+#: sys-utils/mount.c:504
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Operations:\n"
+" -B, --bind mount a subtree somewhere else (same as -o bind)\n"
+" -M, --move move a subtree to some other place\n"
+" -R, --rbind mount a subtree and all submounts somewhere else\n"
+msgstr ""
+"\n"
+"計算：\n"
+" -B, --bind 掛載子樹其他地方 (如同 -o 繫結)\n"
+" -M, --move 移動子樹到某些其他置放\n"
+" -R, --rbind 掛載子樹和所有 submounts 其他地方\n"
+
+#: sys-utils/mount.c:509
+#, fuzzy, c-format
+msgid ""
+" --make-shared mark a subtree as shared\n"
+" --make-slave mark a subtree as slave\n"
+" --make-private mark a subtree as private\n"
+" --make-unbindable mark a subtree as unbindable\n"
+msgstr ""
+" --make-shared 標記子樹做為共享\n"
+" --make-slave 標記子樹做為從屬\n"
+" --make-private 標記子樹做為私人的\n"
+" --make-unbindable 標記子樹做為 unbindable\n"
+
+#: sys-utils/mount.c:514
+#, fuzzy, c-format
+msgid ""
+" --make-rshared recursively mark a whole subtree as shared\n"
+" --make-rslave recursively mark a whole subtree as slave\n"
+" --make-rprivate recursively mark a whole subtree as private\n"
+" --make-runbindable recursively mark a whole subtree as unbindable\n"
+msgstr ""
+" --make-rshared 遞迴標記整個子樹做為共享\n"
+" --make-rslave 遞迴標記整個子樹做為從屬\n"
+" --make-rprivate 遞迴標記整個子樹做為私人的\n"
+" --make-runbindable 遞迴標記整個子樹做為 unbindable\n"
+
+#: sys-utils/mount.c:665 sys-utils/umount.c:496
+#, fuzzy
+msgid "libmount context allocation failed"
+msgstr "libmount 語境配額失敗"
+
+#: sys-utils/mount.c:716 sys-utils/umount.c:549
+#, fuzzy
+msgid "failed to set options pattern"
+msgstr "設定選項胚騰時失敗"
+
+#: sys-utils/mount.c:763 sys-utils/umount.c:566
+#, fuzzy, c-format
+msgid "failed to set target namespace to %s"
+msgstr "設定身分為 %s 時失敗"
+
+#: sys-utils/mount.c:929
+#, fuzzy
+msgid "source specified more than once"
+msgstr "您指定了比磁碟上還多的磁柱數"
+
+#: sys-utils/mountpoint.c:119
+#, fuzzy, c-format
+msgid ""
+" %1$s [-qd] /path/to/directory\n"
+" %1$s -x /dev/device\n"
+msgstr ""
+" %1$s [-qd]/路徑/到/目錄\n"
+" %1$s -x/dev/裝置\n"
+
+#: sys-utils/mountpoint.c:123
+msgid "Check whether a directory or file is a mountpoint.\n"
+msgstr ""
+
+#: sys-utils/mountpoint.c:126
+#, fuzzy
+msgid ""
+" -q, --quiet quiet mode - don't print anything\n"
+" --nofollow do not follow symlink\n"
+" -d, --fs-devno print maj:min device number of the filesystem\n"
+" -x, --devno print maj:min device number of the block device\n"
+msgstr ""
+" -q, --quiet 無訊息模式 - 不列印任何事\n"
+" -d, --fs-devno 列印 maj：最小裝置編號的檔案系統\n"
+" -x, --devno 列印 maj：最小裝置編號的區塊裝置\n"
+
+#: sys-utils/mountpoint.c:207
+#, fuzzy, c-format
+msgid "%s is not a mountpoint\n"
+msgstr "%s 並非 mountpoint\n"
+
+#: sys-utils/mountpoint.c:213
+#, fuzzy, c-format
+msgid "%s is a mountpoint\n"
+msgstr "%s 是 mountpoint\n"
+
+#: sys-utils/nsenter.c:73 sys-utils/setarch.c:99 sys-utils/unshare.c:256
+#, fuzzy, c-format
+msgid " %s [options] [<program> [<argument>...]]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/nsenter.c:77
+msgid "Run a program with namespaces of other processes.\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:80
+#, fuzzy
+msgid " -a, --all enter all namespaces\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/nsenter.c:81
+msgid " -t, --target <pid> target process to get namespaces from\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:82
+#, fuzzy
+msgid " -m, --mount[=<file>] enter mount namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:83
+#, fuzzy
+msgid " -u, --uts[=<file>] enter UTS namespace (hostname etc)\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:84
+#, fuzzy
+msgid " -i, --ipc[=<file>] enter System V IPC namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:85
+#, fuzzy
+msgid " -n, --net[=<file>] enter network namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:86
+#, fuzzy
+msgid " -p, --pid[=<file>] enter pid namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:87
+#, fuzzy
+msgid " -C, --cgroup[=<file>] enter cgroup namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:88
+#, fuzzy
+msgid " -U, --user[=<file>] enter user namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:89
+#, fuzzy
+msgid " -S, --setuid <uid> set uid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/nsenter.c:90
+#, fuzzy
+msgid " -G, --setgid <gid> set gid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/nsenter.c:91
+msgid " --preserve-credentials do not touch uids or gids\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:92
+#, fuzzy
+msgid " -r, --root[=<dir>] set the root directory\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/nsenter.c:93
+#, fuzzy
+msgid " -w, --wd[=<dir>] set the working directory\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/nsenter.c:94
+msgid " -F, --no-fork do not fork before exec'ing <program>\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:96
+msgid " -Z, --follow-context set SELinux context according to --target PID\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:121
+#, c-format
+msgid "neither filename nor target pid supplied for %s"
+msgstr ""
+
+#: sys-utils/nsenter.c:304 sys-utils/unshare.c:433
+#, fuzzy
+msgid "failed to parse uid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/nsenter.c:308 sys-utils/unshare.c:437
+#, fuzzy
+msgid "failed to parse gid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/nsenter.c:348
+msgid "no target PID specified for --follow-context"
+msgstr ""
+
+#: sys-utils/nsenter.c:350
+#, fuzzy, c-format
+msgid "failed to get %d SELinux context"
+msgstr "無法建立新的 selinux 相關項目"
+
+#: sys-utils/nsenter.c:353
+#, fuzzy, c-format
+msgid "failed to set exec context to '%s'"
+msgstr "設定身分為 %s 時失敗"
+
+#: sys-utils/nsenter.c:360
+#, fuzzy
+msgid "no target PID specified for --all"
+msgstr "您指定了比磁碟上還多的磁柱數"
+
+#: sys-utils/nsenter.c:424
+#, fuzzy, c-format
+msgid "reassociate to namespace '%s' failed"
+msgstr "讀取系統時間失敗"
+
+#: sys-utils/nsenter.c:440
+#, fuzzy
+msgid "cannot open current working directory"
+msgstr "%s：無法變更工作目錄 %s：%m"
+
+#: sys-utils/nsenter.c:447
+#, fuzzy
+msgid "change directory by root file descriptor failed"
+msgstr "變更目錄到系統根失敗"
+
+#: sys-utils/nsenter.c:450
+#, fuzzy
+msgid "chroot failed"
+msgstr "掛載失敗"
+
+#: sys-utils/nsenter.c:460
+#, fuzzy
+msgid "change directory by working directory file descriptor failed"
+msgstr "變更目錄到系統根失敗"
+
+#: sys-utils/nsenter.c:471 sys-utils/setpriv.c:1031 sys-utils/setpriv.c:1038
+#: sys-utils/unshare.c:560
+#, fuzzy
+msgid "setgroups failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/pivot_root.c:34
+#, fuzzy, c-format
+msgid " %s [options] new_root put_old\n"
+msgstr " %s [選項] new_root put_old\n"
+
+#: sys-utils/pivot_root.c:38
+#, fuzzy
+msgid "Change the root filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/pivot_root.c:75
+#, fuzzy, c-format
+msgid "failed to change root from `%s' to `%s'"
+msgstr "變更根從『%s』到『%s 時失敗』"
+
+#: sys-utils/prlimit.c:75
+#, fuzzy
+msgid "address space limit"
+msgstr "位址空間限制"
+
+#: sys-utils/prlimit.c:76
+#, fuzzy
+msgid "max core file size"
+msgstr "最大記憶體檔案大小"
+
+#: sys-utils/prlimit.c:77
+#, fuzzy
+msgid "CPU time"
+msgstr "CPU 時間"
+
+#: sys-utils/prlimit.c:77
+#, fuzzy
+msgid "seconds"
+msgstr "秒"
+
+#: sys-utils/prlimit.c:78
+#, fuzzy
+msgid "max data size"
+msgstr "最大資料大小"
+
+#: sys-utils/prlimit.c:79
+#, fuzzy
+msgid "max file size"
+msgstr "最大檔案大小"
+
+#: sys-utils/prlimit.c:80
+#, fuzzy
+msgid "max number of file locks held"
+msgstr "最大檔案鎖定數量延遲"
+
+#: sys-utils/prlimit.c:80
+#, fuzzy
+msgid "locks"
+msgstr "區塊"
+
+#: sys-utils/prlimit.c:81
+#, fuzzy
+msgid "max locked-in-memory address space"
+msgstr "最大 locked-in-memory 位址空間"
+
+#: sys-utils/prlimit.c:82
+#, fuzzy
+msgid "max bytes in POSIX mqueues"
+msgstr "最大位元組在中 POSIX mqueues"
+
+#: sys-utils/prlimit.c:83
+#, fuzzy
+msgid "max nice prio allowed to raise"
+msgstr "最大好 prio 允許到引發"
+
+#: sys-utils/prlimit.c:84
+#, fuzzy
+msgid "max number of open files"
+msgstr "最大開啟檔案數量"
+
+#: sys-utils/prlimit.c:84
+#, fuzzy
+msgid "files"
+msgstr "檔案 %s"
+
+#: sys-utils/prlimit.c:85
+#, fuzzy
+msgid "max number of processes"
+msgstr "最大行程數量"
+
+#: sys-utils/prlimit.c:85
+#, fuzzy
+msgid "processes"
+msgstr "處理識別號"
+
+#: sys-utils/prlimit.c:86
+#, fuzzy
+msgid "max resident set size"
+msgstr "最大常駐設定大小"
+
+#: sys-utils/prlimit.c:87
+#, fuzzy
+msgid "max real-time priority"
+msgstr "最大即時優先權"
+
+#: sys-utils/prlimit.c:88
+#, fuzzy
+msgid "timeout for real-time tasks"
+msgstr "逾時用於即時事務"
+
+#: sys-utils/prlimit.c:88
+#, fuzzy
+msgid "microsecs"
+msgstr "microsecs"
+
+#: sys-utils/prlimit.c:89
+#, fuzzy
+msgid "max number of pending signals"
+msgstr "最大擱置信號數量"
+
+#: sys-utils/prlimit.c:89
+msgid "signals"
+msgstr ""
+
+#: sys-utils/prlimit.c:90
+#, fuzzy
+msgid "max stack size"
+msgstr "最大堆疊大小"
+
+#: sys-utils/prlimit.c:123
+#, fuzzy
+msgid "resource name"
+msgstr "資源名稱"
+
+#: sys-utils/prlimit.c:124
+#, fuzzy
+msgid "resource description"
+msgstr "資源描述"
+
+#: sys-utils/prlimit.c:125
+#, fuzzy
+msgid "soft limit"
+msgstr "軟式限制"
+
+#: sys-utils/prlimit.c:126
+#, fuzzy
+msgid "hard limit (ceiling)"
+msgstr "強制限制 (頂符號)"
+
+#: sys-utils/prlimit.c:127
+#, fuzzy
+msgid "units"
+msgstr "單位"
+
+#: sys-utils/prlimit.c:162
+#, fuzzy, c-format
+msgid " %s [options] [-p PID]\n"
+msgstr " %s [選項] [-p PID]\n"
+
+#: sys-utils/prlimit.c:164
+#, fuzzy, c-format
+msgid " %s [options] COMMAND\n"
+msgstr " %s [選項] 命令\n"
+
+#: sys-utils/prlimit.c:167
+msgid "Show or change the resource limits of a process.\n"
+msgstr ""
+
+#: sys-utils/prlimit.c:169
+#, fuzzy
+msgid ""
+"\n"
+"General Options:\n"
+msgstr ""
+"\n"
+"一般選項：\n"
+
+#: sys-utils/prlimit.c:170
+#, fuzzy
+msgid ""
+" -p, --pid <pid> process id\n"
+" -o, --output <list> define which output columns to use\n"
+" --noheadings don't print headings\n"
+" --raw use the raw output format\n"
+" --verbose verbose output\n"
+msgstr ""
+" -p, --pid <pid> 處理識別號\n"
+" -o, --output<清單> 定義該項輸出欄位以使用\n"
+" --noheadings 不列印標頭\n"
+" --raw 使用原始輸出格式\n"
+" --verbose 詳細的輸出\n"
+" -h, --help 顯示這份說明然後離開\n"
+" -V, --version 輸出版本資訊然後離開\n"
+
+#: sys-utils/prlimit.c:178
+#, fuzzy
+msgid ""
+"\n"
+"Resources Options:\n"
+msgstr ""
+"\n"
+"資源選項：\n"
+
+#: sys-utils/prlimit.c:179
+#, fuzzy
+msgid ""
+" -c, --core maximum size of core files created\n"
+" -d, --data maximum size of a process's data segment\n"
+" -e, --nice maximum nice priority allowed to raise\n"
+" -f, --fsize maximum size of files written by the process\n"
+" -i, --sigpending maximum number of pending signals\n"
+" -l, --memlock maximum size a process may lock into memory\n"
+" -m, --rss maximum resident set size\n"
+" -n, --nofile maximum number of open files\n"
+" -q, --msgqueue maximum bytes in POSIX message queues\n"
+" -r, --rtprio maximum real-time scheduling priority\n"
+" -s, --stack maximum stack size\n"
+" -t, --cpu maximum amount of CPU time in seconds\n"
+" -u, --nproc maximum number of user processes\n"
+" -v, --as size of virtual memory\n"
+" -x, --locks maximum number of file locks\n"
+" -y, --rttime CPU time in microseconds a process scheduled\n"
+" under real-time scheduling\n"
+msgstr ""
+" -c, --core 最大容量的記憶體檔案建立\n"
+" -d, --data 最大容量的處理資料區段\n"
+" -e, --nice 最大值好優先權允許到引發\n"
+" -f, --fsize 最大容量的檔案作者處理\n"
+" -i, --sigpending 最大值擱置信號數量\n"
+" -l, --memlock 最大容量處理也許會鎖定進入記憶體\n"
+" -m, --rss 最大值常駐設定大小\n"
+" -n, --nofile 最大值開啟檔案數量\n"
+" -q, --msgqueue 最大值位元組在中 POSIX 訊息佇列\n"
+" -r, --rtprio 最大值即時排程優先權\n"
+" -s, --stack 最大值堆疊大小\n"
+" -t, --cpu 最大值數目的 CPU 時間的秒數\n"
+" -u, --nproc 最大值使用者行程數量\n"
+" -v, --as 大小的虛擬記憶體\n"
+" -x, --locks 最大值檔案鎖定數量\n"
+" -y, --rttime CPU 時間在中 microseconds 處理已排程\n"
+" 之下即時排程\n"
+
+#: sys-utils/prlimit.c:243 sys-utils/prlimit.c:249 sys-utils/prlimit.c:365
+#: sys-utils/prlimit.c:370
+#, fuzzy
+msgid "unlimited"
+msgstr "無限制的"
+
+#: sys-utils/prlimit.c:331
+#, fuzzy, c-format
+msgid "failed to get old %s limit"
+msgstr "提取舊的 %s 限制時失敗"
+
+#: sys-utils/prlimit.c:355
+#, fuzzy, c-format
+msgid "the soft limit %s cannot exceed the hard limit"
+msgstr "軟式限制 %s 無法超出強制限制"
+
+#: sys-utils/prlimit.c:362
+#, fuzzy, c-format
+msgid "New %s limit for pid %d: "
+msgstr "新 %s 限制："
+
+#: sys-utils/prlimit.c:377
+#, fuzzy, c-format
+msgid "failed to set the %s resource limit"
+msgstr "設定 %s 資源限制時失敗"
+
+#: sys-utils/prlimit.c:378
+#, fuzzy, c-format
+msgid "failed to get the %s resource limit"
+msgstr "提取 %s 資源限制時失敗"
+
+#: sys-utils/prlimit.c:455
+#, fuzzy, c-format
+msgid "failed to parse %s limit"
+msgstr "剖析 %s 限制時失敗"
+
+#: sys-utils/prlimit.c:584
+#, fuzzy
+msgid "option --pid may be specified only once"
+msgstr "選項 --pid 也許會被指定的只一次"
+
+#: sys-utils/prlimit.c:613
+#, fuzzy
+msgid "options --pid and COMMAND are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/readprofile.c:107
+msgid "Display kernel profiling information.\n"
+msgstr ""
+
+#: sys-utils/readprofile.c:111
+#, fuzzy, c-format
+msgid " -m, --mapfile <mapfile> (defaults: \"%s\" and\n"
+msgstr " -m, --mapfile <mapfile> (預設值：「%s」和\n"
+
+#: sys-utils/readprofile.c:113
+#, fuzzy, c-format
+msgid " \"%s\")\n"
+msgstr " 「%s」)\n"
+
+#: sys-utils/readprofile.c:115
+#, fuzzy, c-format
+msgid " -p, --profile <pro-file> (default: \"%s\")\n"
+msgstr " -p, --profile <pro-file> (預設：「%s」)\n"
+
+#: sys-utils/readprofile.c:116
+#, fuzzy
+msgid " -M, --multiplier <mult> set the profiling multiplier to <mult>\n"
+msgstr " -M, --multiplier <mult> 設定側寫檔倍數到<mult>\n"
+
+#: sys-utils/readprofile.c:117
+#, fuzzy
+msgid " -i, --info print only info about the sampling step\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/readprofile.c:118
+#, fuzzy
+msgid " -v, --verbose print verbose data\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/readprofile.c:119
+#, fuzzy
+msgid " -a, --all print all symbols, even if count is 0\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/readprofile.c:120
+#, fuzzy
+msgid " -b, --histbin print individual histogram-bin counts\n"
+msgstr " -b, --histbin 列印個別 histogram-bin 計數\n"
+
+#: sys-utils/readprofile.c:121
+#, fuzzy
+msgid " -s, --counters print individual counters within functions\n"
+msgstr " -s, --counters 列印個別計數器在之內函式\n"
+
+#: sys-utils/readprofile.c:122
+#, fuzzy
+msgid " -r, --reset reset all the counters (root only)\n"
+msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+
+#: sys-utils/readprofile.c:123
+#, fuzzy
+msgid " -n, --no-auto disable byte order auto-detection\n"
+msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
+
+#: sys-utils/readprofile.c:239
+#, fuzzy, c-format
+msgid "error writing %s"
+msgstr "寫入 %s 時發生錯誤"
+
+#: sys-utils/readprofile.c:250
+#, fuzzy
+msgid "input file is empty"
+msgstr "檔案系統型態"
+
+#: sys-utils/readprofile.c:272
+#, fuzzy
+msgid "Assuming reversed byte order. Use -n to force native byte order."
+msgstr "假設反向的位元組次序。使用 -n 到強制原生位元組次序。"
+
+#: sys-utils/readprofile.c:287
+#, fuzzy, c-format
+msgid "Sampling_step: %u\n"
+msgstr "取樣率：%i\n"
+
+#: sys-utils/readprofile.c:303 sys-utils/readprofile.c:324
+#, fuzzy, c-format
+msgid "%s(%i): wrong map line"
+msgstr "%s(%i)：錯誤的映射列"
+
+#: sys-utils/readprofile.c:314
+#, fuzzy, c-format
+msgid "can't find \"_stext\" in %s"
+msgstr "找不到「stext」在中 %s(_S)"
+
+#: sys-utils/readprofile.c:347
+#, fuzzy
+msgid "profile address out of range. Wrong map file?"
+msgstr "側寫檔位址超出範圍。錯誤的映射檔案？"
+
+#: sys-utils/readprofile.c:405
+msgid "total"
+msgstr "總計"
+
+#: sys-utils/renice.c:52
+#, fuzzy
+msgid "process ID"
+msgstr "處理識別號"
+
+#: sys-utils/renice.c:53
+#, fuzzy
+msgid "process group ID"
+msgstr "處理群組識別號"
+
+#: sys-utils/renice.c:62
+#, fuzzy, c-format
+msgid ""
+" %1$s [-n] <priority> [-p|--pid] <pid>...\n"
+" %1$s [-n] <priority> -g|--pgrp <pgid>...\n"
+" %1$s [-n] <priority> -u|--user <user>...\n"
+msgstr ""
+" %1$s [-n] <priority> [-p]<pid>[<pid>...]\n"
+" %1$s [-n]<優先權> -g<pgrp>[<pgrp>...]\n"
+" %1$s [-n]<優先權> -u<使用者>[<使用者>...]\n"
+
+#: sys-utils/renice.c:68
+msgid "Alter the priority of running processes.\n"
+msgstr ""
+
+#: sys-utils/renice.c:71
+#, fuzzy
+msgid " -n, --priority <num> specify the nice value\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+
+#: sys-utils/renice.c:72
+#, fuzzy
+msgid " -p, --pid interpret arguments as process ID (default)\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/renice.c:73
+#, fuzzy
+msgid " -g, --pgrp interpret arguments as process group ID\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/renice.c:74
+#, fuzzy
+msgid " -u, --user interpret arguments as username or user ID\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/renice.c:86
+#, fuzzy, c-format
+msgid "failed to get priority for %d (%s)"
+msgstr "提取優先權用於 %d (%s) 時失敗"
+
+#: sys-utils/renice.c:99
+#, fuzzy, c-format
+msgid "failed to set priority for %d (%s)"
+msgstr "設定優先權用於 %d (%s) 時失敗"
+
+#: sys-utils/renice.c:104
+#, fuzzy, c-format
+msgid "%d (%s) old priority %d, new priority %d\n"
+msgstr "%d (%s) 舊的優先權 %d，新優先權 %d\n"
+
+#: sys-utils/renice.c:150
+#, fuzzy, c-format
+msgid "invalid priority '%s'"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/renice.c:177
+#, fuzzy, c-format
+msgid "unknown user %s"
+msgstr "不明使用者 %s"
+
+#. TRANSLATORS: The first %s is one of the above
+#. * three ID names. Read: "bad value for %s: %s"
+#: sys-utils/renice.c:186
+#, fuzzy, c-format
+msgid "bad %s value: %s"
+msgstr "不當的值 %s"
+
+#: sys-utils/rfkill.c:128
+#, fuzzy
+msgid "kernel device name"
+msgstr "內部內核裝置名稱"
+
+#: sys-utils/rfkill.c:129
+#, fuzzy
+msgid "device identifier value"
+msgstr "裝置識別碼"
+
+#: sys-utils/rfkill.c:130
+msgid "device type name that can be used as identifier"
+msgstr ""
+
+#: sys-utils/rfkill.c:131
+#, fuzzy
+msgid "device type description"
+msgstr "旗標描述"
+
+#: sys-utils/rfkill.c:132
+#, fuzzy
+msgid "status of software block"
+msgstr "大小的鎖定"
+
+#: sys-utils/rfkill.c:133
+#, fuzzy
+msgid "status of hardware block"
+msgstr "大小的鎖定"
+
+#: sys-utils/rfkill.c:197
+#, fuzzy, c-format
+msgid "cannot set non-blocking %s"
+msgstr "無法開啟 %s"
+
+#: sys-utils/rfkill.c:218
+#, c-format
+msgid "wrong size of rfkill event: %zu < %d"
+msgstr ""
+
+#: sys-utils/rfkill.c:248
+#, fuzzy, c-format
+msgid "failed to poll %s"
+msgstr "剖析 %s 時失敗"
+
+#: sys-utils/rfkill.c:315
+#, fuzzy
+msgid "invalid identifier"
+msgstr "裝置識別碼"
+
+#: sys-utils/rfkill.c:395 sys-utils/rfkill.c:398
+#, fuzzy
+msgid "blocked"
+msgstr "已鎖定"
+
+#: sys-utils/rfkill.c:395 sys-utils/rfkill.c:398
+#, fuzzy
+msgid "unblocked"
+msgstr "已鎖定"
+
+#: sys-utils/rfkill.c:417 sys-utils/rfkill.c:489 sys-utils/rfkill.c:533
+#, fuzzy, c-format
+msgid "invalid identifier: %s"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:575
+#, fuzzy, c-format
+msgid " %s [options] command [identifier ...]\n"
+msgstr " %s [選項] [檔案]\n"
+
+#: sys-utils/rfkill.c:578
+msgid "Tool for enabling and disabling wireless devices.\n"
+msgstr ""
+
+#. TRANSLATORS: command names should not be translated, explaining
+#. them as additional field after identifier is fine, for example
+#. *
+#. list [identifier] (lista [tarkenne])
+#.
+#: sys-utils/rfkill.c:602
+msgid " help\n"
+msgstr ""
+
+#: sys-utils/rfkill.c:603
+msgid " event\n"
+msgstr ""
+
+#: sys-utils/rfkill.c:604
+#, fuzzy
+msgid " list [identifier]\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:605
+#, fuzzy
+msgid " block identifier\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:606
+#, fuzzy
+msgid " unblock identifier\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rtcwake.c:102
+msgid "Enter a system sleep state until a specified wakeup time.\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:105
+#, fuzzy
+msgid " -a, --auto reads the clock mode from adjust file (default)\n"
+msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
+
+#: sys-utils/rtcwake.c:107
+#, fuzzy, c-format
+msgid ""
+" -A, --adjfile <file> specifies the path to the adjust file\n"
+" the default is %s\n"
+msgstr ""
+" --noadjfile 不存取 %s；這個需求使用的\n"
+" 還是 --utc 或 --localtime\n"
+" --adjfile <file> 指定路徑到調整檔案；\n"
+" 預設是 %s\n"
+
+#: sys-utils/rtcwake.c:109
+msgid " --date <timestamp> date time of timestamp to wake\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:110
+msgid " -d, --device <device> select rtc device (rtc0|rtc1|...)\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:111
+msgid " -n, --dry-run does everything, but suspend\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:112
+#, fuzzy
+msgid " -l, --local RTC uses local timezone\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/rtcwake.c:113
+msgid " --list-modes list available modes\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:114
+msgid " -m, --mode <mode> standby|mem|... sleep mode\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:115
+msgid " -s, --seconds <seconds> seconds to sleep\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:116
+msgid " -t, --time <time_t> time to wake\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:117
+#, fuzzy
+msgid " -u, --utc RTC uses UTC\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/rtcwake.c:118
+#, fuzzy
+msgid " -v, --verbose verbose messages\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/rtcwake.c:168
+#, fuzzy
+msgid "read rtc time failed"
+msgstr "讀取 rtc 時間失敗"
+
+#: sys-utils/rtcwake.c:174
+#, fuzzy
+msgid "read system time failed"
+msgstr "讀取系統時間失敗"
+
+#: sys-utils/rtcwake.c:190
+#, fuzzy
+msgid "convert rtc time failed"
+msgstr "轉換 rtc 時間失敗"
+
+#: sys-utils/rtcwake.c:238
+#, fuzzy
+msgid "set rtc wake alarm failed"
+msgstr "設定 rtc 喚醒警示失敗"
+
+#: sys-utils/rtcwake.c:278
+#, fuzzy
+msgid "discarding stdin"
+msgstr "捨棄對齊偏移"
+
+#: sys-utils/rtcwake.c:329
+#, fuzzy, c-format
+msgid "unexpected third line in: %s: %s"
+msgstr "未預期的檔案結束於 %s"
+
+#: sys-utils/rtcwake.c:342 sys-utils/rtcwake.c:661
+#, fuzzy
+msgid "read rtc alarm failed"
+msgstr "讀取 rtc 警示失敗"
+
+#: sys-utils/rtcwake.c:347
+#, fuzzy, c-format
+msgid "alarm: off\n"
+msgstr "警示：關閉\n"
+
+#: sys-utils/rtcwake.c:360
+#, fuzzy
+msgid "convert time failed"
+msgstr "轉換時間失敗"
+
+#: sys-utils/rtcwake.c:365
+#, fuzzy, c-format
+msgid "alarm: on %s"
+msgstr "警示：於 %s"
+
+#: sys-utils/rtcwake.c:409
+#, fuzzy, c-format
+msgid "could not read: %s"
+msgstr "無法讀取 %s"
+
+#: sys-utils/rtcwake.c:490
+#, fuzzy, c-format
+msgid "unrecognized suspend state '%s'"
+msgstr "無法辨識的懸置狀態『%s』"
+
+#: sys-utils/rtcwake.c:498
+#, fuzzy
+msgid "invalid seconds argument"
+msgstr "無效的秒引數"
+
+#: sys-utils/rtcwake.c:502
+#, fuzzy
+msgid "invalid time argument"
+msgstr "無效的時間引數"
+
+#: sys-utils/rtcwake.c:529
+#, c-format
+msgid "%s: assuming RTC uses UTC ...\n"
+msgstr "%s：假設 RTC 使用 UTC …\n"
+
+#: sys-utils/rtcwake.c:534
+msgid "Using UTC time.\n"
+msgstr "使用 UTC 時間。\n"
+
+#: sys-utils/rtcwake.c:535
+msgid "Using local time.\n"
+msgstr "使用當地時間。\n"
+
+#: sys-utils/rtcwake.c:538
+#, fuzzy
+msgid "must provide wake time (see --seconds, --time and --date options)"
+msgstr "必須提供喚醒時間 (參看 -t 和 -s 選項)"
+
+#: sys-utils/rtcwake.c:544
+#, fuzzy, c-format
+msgid "%s not enabled for wakeup events"
+msgstr "%s 未啟用用於 wakeup 事件"
+
+#: sys-utils/rtcwake.c:551
+#, c-format
+msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
+msgstr "警示 %ld，系統時間 %ld，rtc 時間 %ld，秒數 %u\n"
+
+#: sys-utils/rtcwake.c:558
+#, fuzzy, c-format
+msgid "time doesn't go backward to %s"
+msgstr "時間不前往退一步到 %s"
+
+#: sys-utils/rtcwake.c:568
+#, fuzzy, c-format
+msgid "%s: wakeup using %s at %s"
+msgstr "%s：wakeup 使用 %s 於 %s"
+
+#: sys-utils/rtcwake.c:572
+#, fuzzy, c-format
+msgid "%s: wakeup from \"%s\" using %s at %s"
+msgstr "%s：wakeup 從「%s」使用 %s 於 %s"
+
+#: sys-utils/rtcwake.c:582
+#, c-format
+msgid "suspend mode: no; leaving\n"
+msgstr "懸置模式：無；離開\n"
+
+#: sys-utils/rtcwake.c:605
+#, c-format
+msgid "suspend mode: off; executing %s\n"
+msgstr "懸置模式：關閉；執行 %s\n"
+
+#: sys-utils/rtcwake.c:614
+#, fuzzy
+msgid "failed to find shutdown command"
+msgstr "讀取時失敗：%s"
+
+#: sys-utils/rtcwake.c:624
+#, c-format
+msgid "suspend mode: on; reading rtc\n"
+msgstr "懸置模式：開啟；讀取 rtc\n"
+
+#: sys-utils/rtcwake.c:629
+#, fuzzy
+msgid "rtc read failed"
+msgstr "rtc 讀取失敗"
+
+#: sys-utils/rtcwake.c:641
+#, c-format
+msgid "suspend mode: disable; disabling alarm\n"
+msgstr "懸置模式：停用；停用警示\n"
+
+#: sys-utils/rtcwake.c:645
+#, fuzzy, c-format
+msgid "suspend mode: show; printing alarm info\n"
+msgstr "懸置模式：顯示；列印警示資訊\n"
+
+#: sys-utils/rtcwake.c:652
+#, c-format
+msgid "suspend mode: %s; suspending system\n"
+msgstr "懸置模式：%s；懸置系統\n"
+
+#: sys-utils/rtcwake.c:666
+#, fuzzy
+msgid "disable rtc alarm interrupt failed"
+msgstr "停用 rtc 警示插斷失敗"
+
+#: sys-utils/setarch.c:48
+#, c-format
+msgid "Switching on %s.\n"
+msgstr "切換於 %s。\n"
+
+#: sys-utils/setarch.c:97
+#, fuzzy, c-format
+msgid " %s [<arch>] [options] [<program> [<argument>...]]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/setarch.c:102
+msgid "Change the reported architecture and set personality flags.\n"
+msgstr ""
+
+#: sys-utils/setarch.c:105
+msgid " -B, --32bit turns on ADDR_LIMIT_32BIT\n"
+msgstr ""
+
+#: sys-utils/setarch.c:106
+msgid " -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
+msgstr ""
+
+#: sys-utils/setarch.c:107
+msgid " -I, --short-inode turns on SHORT_INODE\n"
+msgstr ""
+
+#: sys-utils/setarch.c:108
+msgid " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
+msgstr ""
+
+#: sys-utils/setarch.c:109
+msgid " -R, --addr-no-randomize disables randomization of the virtual address space\n"
+msgstr ""
+
+#: sys-utils/setarch.c:110
+msgid " -S, --whole-seconds turns on WHOLE_SECONDS\n"
+msgstr ""
+
+#: sys-utils/setarch.c:111
+msgid " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
+msgstr ""
+
+#: sys-utils/setarch.c:112
+msgid " -X, --read-implies-exec turns on READ_IMPLIES_EXEC\n"
+msgstr ""
+
+#: sys-utils/setarch.c:113
+msgid " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
+msgstr ""
+
+#: sys-utils/setarch.c:114
+msgid " -3, --3gb limits the used address space to a maximum of 3 GB\n"
+msgstr ""
+
+#: sys-utils/setarch.c:115
+msgid " --4gb ignored (for backward compatibility only)\n"
+msgstr ""
+
+#: sys-utils/setarch.c:116
+msgid " --uname-2.6 turns on UNAME26\n"
+msgstr ""
+
+#: sys-utils/setarch.c:117
+#, fuzzy
+msgid " -v, --verbose say what options are being switched on\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: sys-utils/setarch.c:120
+msgid " --list list settable architectures, and exit\n"
+msgstr ""
+
+#: sys-utils/setarch.c:271
+#, fuzzy, c-format
+msgid "Kernel cannot set architecture to %s"
+msgstr "無法設定逾時用於 %s"
+
+#: sys-utils/setarch.c:321
+msgid "Not enough arguments"
+msgstr "引數不足"
+
+#: sys-utils/setarch.c:389
+#, fuzzy
+msgid "unrecognized option '--list'"
+msgstr "無法辨識的輸入：%s"
+
+#: sys-utils/setarch.c:402
+#, fuzzy
+msgid "no architecture argument or personality flags specified"
+msgstr "未指定任何長度引數"
+
+#: sys-utils/setarch.c:414
+#, c-format
+msgid "%s: Unrecognized architecture"
+msgstr "%s：無法辨識的架構"
+
+#: sys-utils/setarch.c:432
+#, fuzzy, c-format
+msgid "failed to set personality to %s"
+msgstr "設定身分為 %s 時失敗"
+
+#: sys-utils/setarch.c:444
+#, fuzzy, c-format
+msgid "Execute command `%s'.\n"
+msgstr "執行日期命令：%s\n"
+
+#: sys-utils/setpriv.c:119
+#, fuzzy, c-format
+msgid " %s [options] <program> [<argument>...]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/setpriv.c:123
+msgid "Run a program with different privilege settings.\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:126
+#, fuzzy
+msgid " -d, --dump show current state (and do not exec)\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/setpriv.c:127
+msgid " --nnp, --no-new-privs disallow granting new privileges\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:128
+msgid " --ambient-caps <caps,...> set ambient capabilities\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:129
+msgid " --inh-caps <caps,...> set inheritable capabilities\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:130
+msgid " --bounding-set <caps> set capability bounding set\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:131
+#, fuzzy
+msgid " --ruid <uid|user> set real uid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:132
+#, fuzzy
+msgid " --euid <uid|user> set effective uid\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/setpriv.c:133
+#, fuzzy
+msgid " --rgid <gid|user> set real gid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:134
+#, fuzzy
+msgid " --egid <gid|group> set effective gid\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/setpriv.c:135
+#, fuzzy
+msgid " --reuid <uid|user> set real and effective uid\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/setpriv.c:136
+#, fuzzy
+msgid " --regid <gid|group> set real and effective gid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:137
+#, fuzzy
+msgid " --clear-groups clear supplementary groups\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:138
+#, fuzzy
+msgid " --keep-groups keep supplementary groups\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:139
+#, fuzzy
+msgid " --init-groups initialize supplementary groups\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:140
+#, fuzzy
+msgid " --groups <group,...> set supplementary groups by UID or name\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:141
+#, fuzzy
+msgid " --securebits <bits> set securebits\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+
+#: sys-utils/setpriv.c:142
+#, fuzzy
+msgid ""
+" --pdeathsig keep|clear|<signame>\n"
+" set or clear parent death signal\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: sys-utils/setpriv.c:144
+#, fuzzy
+msgid " --selinux-label <label> set SELinux label\n"
+msgstr " -o, --office <office> 辦公室數字\n"
+
+#: sys-utils/setpriv.c:145
+msgid " --apparmor-profile <pr> set AppArmor profile\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:146
+msgid ""
+" --reset-env clear all environment and initialize\n"
+" HOME, SHELL, USER, LOGNAME and PATH\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:152
+msgid " This tool can be dangerous. Read the manpage, and be careful.\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:170
+#, fuzzy
+msgid "invalid capability type"
+msgstr "無效的分割區類型『%c』\n"
+
+#: sys-utils/setpriv.c:222 sys-utils/setpriv.c:566
+msgid "getting process secure bits failed"
+msgstr ""
+
+#: sys-utils/setpriv.c:226
+#, c-format
+msgid "Securebits: "
+msgstr ""
+
+#: sys-utils/setpriv.c:246
+#, fuzzy, c-format
+msgid "[none]\n"
+msgstr "無"
+
+#: sys-utils/setpriv.c:272
+#, fuzzy, c-format
+msgid "%s: too long"
+msgstr "列太長"
+
+#: sys-utils/setpriv.c:300
+#, c-format
+msgid "Supplementary groups: "
+msgstr ""
+
+#: sys-utils/setpriv.c:302 sys-utils/setpriv.c:368 sys-utils/setpriv.c:373
+#: sys-utils/setpriv.c:379 sys-utils/setpriv.c:385 sys-utils/setpriv.c:392
+#, fuzzy, c-format
+msgid "[none]"
+msgstr "無"
+
+#: sys-utils/setpriv.c:320
+#, fuzzy
+msgid "get pdeathsig failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:340
+#, c-format
+msgid "uid: %u\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:341
+#, c-format
+msgid "euid: %u\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:344
+#, c-format
+msgid "suid: %u\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:346 sys-utils/setpriv.c:459
+#, fuzzy
+msgid "getresuid failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:355 sys-utils/setpriv.c:474
+#, fuzzy
+msgid "getresgid failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/setpriv.c:366
+#, c-format
+msgid "Effective capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:371
+#, c-format
+msgid "Permitted capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:377
+#, c-format
+msgid "Inheritable capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:382
+#, c-format
+msgid "Ambient capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:387
+#, fuzzy, c-format
+msgid "[unsupported]"
+msgstr "不受支援的命令"
+
+#: sys-utils/setpriv.c:390
+#, c-format
+msgid "Capability bounding set: "
+msgstr ""
+
+#: sys-utils/setpriv.c:399
+#, fuzzy
+msgid "SELinux label"
+msgstr "Linux 純文字"
+
+#: sys-utils/setpriv.c:402
+msgid "AppArmor profile"
+msgstr ""
+
+#: sys-utils/setpriv.c:415
+#, c-format
+msgid "cap %d: libcap-ng is broken"
+msgstr ""
+
+#: sys-utils/setpriv.c:437
+msgid "Invalid supplementary group id"
+msgstr ""
+
+#: sys-utils/setpriv.c:447
+#, fuzzy
+msgid "failed to get parent death signal"
+msgstr "剖析掛載表時失敗"
+
+#: sys-utils/setpriv.c:467
+#, fuzzy
+msgid "setresuid failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:482
+#, fuzzy
+msgid "setresgid failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/setpriv.c:514
+#, fuzzy
+msgid "unsupported capability type"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/setpriv.c:531
+msgid "bad capability string"
+msgstr ""
+
+#: sys-utils/setpriv.c:539
+msgid "libcap-ng is too old for \"all\" caps"
+msgstr ""
+
+#: sys-utils/setpriv.c:551
+#, fuzzy, c-format
+msgid "unknown capability \"%s\""
+msgstr "不明機能『%s』"
+
+#: sys-utils/setpriv.c:575
+#, fuzzy
+msgid "unrecognized securebit set -- refusing to adjust"
+msgstr "無法辨識的格式 - 使用磁區數\n"
+
+#: sys-utils/setpriv.c:579
+msgid "bad securebits string"
+msgstr ""
+
+#: sys-utils/setpriv.c:586
+#, fuzzy
+msgid "+all securebits is not allowed"
+msgstr "『%c』未被允許"
+
+#: sys-utils/setpriv.c:599
+#, fuzzy
+msgid "adjusting keep_caps does not make sense"
+msgstr "指定的範圍<%d:%d>不具任何意義"
+
+#: sys-utils/setpriv.c:603
+#, fuzzy
+msgid "unrecognized securebit"
+msgstr "無法辨識的輸入：%s"
+
+#: sys-utils/setpriv.c:623
+msgid "SELinux is not running"
+msgstr ""
+
+#: sys-utils/setpriv.c:638
+#, fuzzy, c-format
+msgid "close failed: %s"
+msgstr "搜尋失敗"
+
+#: sys-utils/setpriv.c:646
+msgid "AppArmor is not running"
+msgstr ""
+
+#: sys-utils/setpriv.c:825
+msgid "duplicate --no-new-privs option"
+msgstr ""
+
+#: sys-utils/setpriv.c:830
+msgid "duplicate ruid"
+msgstr ""
+
+#: sys-utils/setpriv.c:832
+#, fuzzy
+msgid "failed to parse ruid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:840
+msgid "duplicate euid"
+msgstr ""
+
+#: sys-utils/setpriv.c:842
+#, fuzzy
+msgid "failed to parse euid"
+msgstr "剖析結束時失敗"
+
+#: sys-utils/setpriv.c:846
+msgid "duplicate ruid or euid"
+msgstr ""
+
+#: sys-utils/setpriv.c:848
+#, fuzzy
+msgid "failed to parse reuid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:857
+msgid "duplicate rgid"
+msgstr ""
+
+#: sys-utils/setpriv.c:859
+#, fuzzy
+msgid "failed to parse rgid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:863
+msgid "duplicate egid"
+msgstr ""
+
+#: sys-utils/setpriv.c:865
+#, fuzzy
+msgid "failed to parse egid"
+msgstr "剖析結束時失敗"
+
+#: sys-utils/setpriv.c:869
+msgid "duplicate rgid or egid"
+msgstr ""
+
+#: sys-utils/setpriv.c:871
+#, fuzzy
+msgid "failed to parse regid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:876
+msgid "duplicate --clear-groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:882
+msgid "duplicate --keep-groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:888
+msgid "duplicate --init-groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:894
+msgid "duplicate --groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:900
+msgid "duplicate --keep-pdeathsig option"
+msgstr ""
+
+#: sys-utils/setpriv.c:909
+msgid "duplicate --inh-caps option"
+msgstr ""
+
+#: sys-utils/setpriv.c:915
+msgid "duplicate --ambient-caps option"
+msgstr ""
+
+#: sys-utils/setpriv.c:921
+msgid "duplicate --bounding-set option"
+msgstr ""
+
+#: sys-utils/setpriv.c:927
+msgid "duplicate --securebits option"
+msgstr ""
+
+#: sys-utils/setpriv.c:933
+msgid "duplicate --selinux-label option"
+msgstr ""
+
+#: sys-utils/setpriv.c:939
+msgid "duplicate --apparmor-profile option"
+msgstr ""
+
+#: sys-utils/setpriv.c:958
+msgid "--dump is incompatible with all other options"
+msgstr ""
+
+#: sys-utils/setpriv.c:966
+#, fuzzy
+msgid "--list-caps must be specified alone"
+msgstr "選項 --pid 也許會被指定的只一次"
+
+#: sys-utils/setpriv.c:972
+#, fuzzy
+msgid "No program specified"
+msgstr "未指定任何檔名"
+
+#: sys-utils/setpriv.c:978
+msgid "--[re]gid requires --keep-groups, --clear-groups, --init-groups, or --groups"
+msgstr ""
+
+#: sys-utils/setpriv.c:982
+msgid "--init-groups requires --ruid or --reuid"
+msgstr ""
+
+#: sys-utils/setpriv.c:986
+#, c-format
+msgid "uid %ld not found, --init-groups requires an user that can be found on the system"
+msgstr ""
+
+#: sys-utils/setpriv.c:1001
+msgid "disallow granting new privileges failed"
+msgstr ""
+
+#: sys-utils/setpriv.c:1009
+msgid "keep process capabilities failed"
+msgstr ""
+
+#: sys-utils/setpriv.c:1017
+msgid "activate capabilities"
+msgstr ""
+
+#: sys-utils/setpriv.c:1023
+msgid "reactivate capabilities"
+msgstr ""
+
+#: sys-utils/setpriv.c:1034
+#, fuzzy
+msgid "initgroups failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/setpriv.c:1042
+#, fuzzy
+msgid "set process securebits failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:1048
+msgid "apply bounding set"
+msgstr ""
+
+#: sys-utils/setpriv.c:1054
+msgid "apply capabilities"
+msgstr ""
+
+#: sys-utils/setpriv.c:1063
+#, fuzzy
+msgid "set parent death signal failed"
+msgstr "設定 rtc 喚醒警示失敗"
+
+#: sys-utils/setsid.c:33
+#, fuzzy, c-format
+msgid " %s [options] <program> [arguments ...]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/setsid.c:37
+msgid "Run a program in a new session.\n"
+msgstr ""
+
+#: sys-utils/setsid.c:40
+#, fuzzy
+msgid " -c, --ctty set the controlling terminal to the current one\n"
+msgstr " -c, --ctty 設定控制終端機到目前的一個\n"
+
+#: sys-utils/setsid.c:41
+#, fuzzy
+msgid " -f, --fork always fork\n"
+msgstr " -f 強制檢查\n"
+
+#: sys-utils/setsid.c:42
+msgid " -w, --wait wait program to exit, and use the same return\n"
+msgstr ""
+
+#: sys-utils/setsid.c:100
+#, fuzzy
+msgid "fork"
+msgstr "衍生"
+
+#: sys-utils/setsid.c:112
+#, fuzzy, c-format
+msgid "child %d did not exit normally"
+msgstr "卸載的『%s』並未正常離開"
+
+#: sys-utils/setsid.c:117
+#, fuzzy
+msgid "setsid failed"
+msgstr "setsid 失敗"
+
+#: sys-utils/setsid.c:120
+#, fuzzy
+msgid "failed to set the controlling terminal"
+msgstr "設定控制終端機時失敗"
+
+#: sys-utils/swapoff.c:85
+#, fuzzy, c-format
+msgid "swapoff %s\n"
+msgstr "swapoff %s\n"
+
+#: sys-utils/swapoff.c:104
+msgid "Not superuser."
+msgstr "並非系統管理者。"
+
+#: sys-utils/swapoff.c:107
+#, c-format
+msgid "%s: swapoff failed"
+msgstr "%s：swapoff 失敗"
+
+#: sys-utils/swapoff.c:122 sys-utils/swapon.c:794
+#, fuzzy, c-format
+msgid " %s [options] [<spec>]\n"
+msgstr " %s [選項] [<spec>]\n"
+
+#: sys-utils/swapoff.c:125
+msgid "Disable devices and files for paging and swapping.\n"
+msgstr ""
+
+#: sys-utils/swapoff.c:128
+#, fuzzy
+msgid ""
+" -a, --all disable all swaps from /proc/swaps\n"
+" -v, --verbose verbose mode\n"
+msgstr ""
+" -a, --all 全部停用交換從/proc/交換\n"
+" -v, --verbose 詳細模式\n"
+
+#: sys-utils/swapoff.c:134
+#, fuzzy
+msgid ""
+"\n"
+"The <spec> parameter:\n"
+" -L <label> LABEL of device to be used\n"
+" -U <uuid> UUID of device to be used\n"
+" LABEL=<label> LABEL of device to be used\n"
+" UUID=<uuid> UUID of device to be used\n"
+" <device> name of device to be used\n"
+" <file> name of file to be used\n"
+msgstr ""
+"\n"
+"<spec> 參數：\n"
+" -L<標貼> 標貼的裝置為使用\n"
+" -U<uuid> UUID 的裝置為使用\n"
+" 標貼=<標貼> 標貼的裝置為使用\n"
+" UUID=<uuid> UUID 的裝置為使用\n"
+"<裝置> 名稱的裝置為使用\n"
+"<檔案> 名稱的檔案為使用\n"
+
+#: sys-utils/swapon.c:96
+#, fuzzy
+msgid "device file or partition path"
+msgstr "裝置檔案或分割路徑"
+
+#: sys-utils/swapon.c:97
+#, fuzzy
+msgid "type of the device"
+msgstr "型態的裝置"
+
+#: sys-utils/swapon.c:98
+#, fuzzy
+msgid "size of the swap area"
+msgstr "大小的交換區域"
+
+#: sys-utils/swapon.c:99
+#, fuzzy
+msgid "bytes in use"
+msgstr "位元組在中使用"
+
+#: sys-utils/swapon.c:100
+#, fuzzy
+msgid "swap priority"
+msgstr "交換優先權"
+
+#: sys-utils/swapon.c:101
+msgid "swap uuid"
+msgstr ""
+
+#: sys-utils/swapon.c:102
+#, fuzzy
+msgid "swap label"
+msgstr "無標籤，"
+
+#: sys-utils/swapon.c:250
+#, fuzzy, c-format
+msgid "%s\t\t\t\tType\t\tSize\tUsed\tPriority\n"
+msgstr "%s\t\t\t\t型態\t\t大小\t使用\t優先權\n"
+
+#: sys-utils/swapon.c:250
+#, fuzzy
+msgid "Filename"
+msgstr "檔名"
+
+#: sys-utils/swapon.c:316
+#, c-format
+msgid "%s: reinitializing the swap."
+msgstr "%s：重新初始化交換區。"
+
+#: sys-utils/swapon.c:380
+#, c-format
+msgid "%s: lseek failed"
+msgstr "%s：lseek 失敗"
+
+#: sys-utils/swapon.c:386
+#, c-format
+msgid "%s: write signature failed"
+msgstr "%s：寫入簽章時失敗"
+
+#: sys-utils/swapon.c:540
+#, c-format
+msgid "%s: skipping - it appears to have holes."
+msgstr "%s：跳過 - 看來似乎有漏洞。"
+
+#: sys-utils/swapon.c:548
+#, c-format
+msgid "%s: get size failed"
+msgstr "%s：取得大小時失敗"
+
+#: sys-utils/swapon.c:554
+#, c-format
+msgid "%s: read swap header failed"
+msgstr "%s：讀取交換區頁首失敗"
+
+#: sys-utils/swapon.c:559
+#, fuzzy, c-format
+msgid "%s: found signature [pagesize=%d, signature=%s]"
+msgstr "%s：找到交換區簽章：版本 %d，頁面大小 %d，%s 位元組序"
+
+#: sys-utils/swapon.c:570
+#, c-format
+msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
+msgstr "%s：pagesize=%d，swapsize=%llu，devsize=%llu"
+
+#: sys-utils/swapon.c:575
+#, c-format
+msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
+msgstr "%s：last_page 0x%08llx 大於實際的交換區空間大小"
+
+#: sys-utils/swapon.c:585
+#, c-format
+msgid "%s: swap format pagesize does not match."
+msgstr "%s：交換區格式頁面大小不吻合。"
+
+#: sys-utils/swapon.c:591
+#, c-format
+msgid "%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
+msgstr "%s：交換區格式頁面大小不吻合。(使用 --fixpgsz 以重新初始它。)"
+
+#: sys-utils/swapon.c:600
+#, c-format
+msgid "%s: software suspend data detected. Rewriting the swap signature."
+msgstr "%s：偵測到軟體懸置資料。重新寫入交換區簽章。"
+
+#: sys-utils/swapon.c:670
+#, fuzzy, c-format
+msgid "swapon %s\n"
+msgstr "swapon %s\n"
+
+#: sys-utils/swapon.c:674
+#, c-format
+msgid "%s: swapon failed"
+msgstr "%s：swapon 失敗"
+
+#: sys-utils/swapon.c:747
+#, fuzzy, c-format
+msgid "%s: noauto option -- ignored"
+msgstr "%s：剖析錯誤於列 %d -- 忽略"
+
+#: sys-utils/swapon.c:769
+#, fuzzy, c-format
+msgid "%s: already active -- ignored"
+msgstr "%s：剖析錯誤於列 %d -- 忽略"
+
+#: sys-utils/swapon.c:775
+#, fuzzy, c-format
+msgid "%s: inaccessible -- ignored"
+msgstr "%s：無法寫入 inodes"
+
+#: sys-utils/swapon.c:797
+msgid "Enable devices and files for paging and swapping.\n"
+msgstr ""
+
+#: sys-utils/swapon.c:800
+#, fuzzy
+msgid " -a, --all enable all swaps from /etc/fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/swapon.c:801
+msgid " -d, --discard[=<policy>] enable swap discards, if supported by device\n"
+msgstr ""
+
+#: sys-utils/swapon.c:802
+msgid " -e, --ifexists silently skip devices that do not exist\n"
+msgstr ""
+
+#: sys-utils/swapon.c:803
+msgid " -f, --fixpgsz reinitialize the swap space if necessary\n"
+msgstr ""
+
+#: sys-utils/swapon.c:804
+msgid " -o, --options <list> comma-separated list of swap options\n"
+msgstr ""
+
+#: sys-utils/swapon.c:805
+#, fuzzy
+msgid " -p, --priority <prio> specify the priority of the swap device\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/swapon.c:806
+msgid " -s, --summary display summary about used swap devices (DEPRECATED)\n"
+msgstr ""
+
+#: sys-utils/swapon.c:807
+msgid " --show[=<columns>] display summary in definable table\n"
+msgstr ""
+
+#: sys-utils/swapon.c:808
+#, fuzzy
+msgid " --noheadings don't print table heading (with --show)\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/swapon.c:809
+#, fuzzy
+msgid " --raw use the raw output format (with --show)\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/swapon.c:810
+#, fuzzy
+msgid " --bytes display swap size in bytes in --show output\n"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/swapon.c:811
+#, fuzzy
+msgid " -v, --verbose verbose mode\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/swapon.c:816
+#, fuzzy
+msgid ""
+"\n"
+"The <spec> parameter:\n"
+" -L <label> synonym for LABEL=<label>\n"
+" -U <uuid> synonym for UUID=<uuid>\n"
+" LABEL=<label> specifies device by swap area label\n"
+" UUID=<uuid> specifies device by swap area UUID\n"
+" PARTLABEL=<label> specifies device by partition label\n"
+" PARTUUID=<uuid> specifies device by partition UUID\n"
+" <device> name of device to be used\n"
+" <file> name of file to be used\n"
+msgstr ""
+"\n"
+"<spec> 參數：\n"
+" -L<標貼> 同義字用於標貼=<標貼>\n"
+" -U<uuid> 同義字用於 UUID=<uuid>\n"
+" 標貼=<標貼> 指定裝置由交換區域標貼\n"
+" UUID=<uuid> 指定裝置由交換區域 UUID\n"
+" PARTLABEL=<標貼> 指定裝置由分割標貼\n"
+" PARTUUID=<uuid> 指定裝置由分割 UUID\n"
+"<裝置> 名稱的裝置為使用\n"
+"<檔案> 名稱的檔案為使用\n"
+
+#: sys-utils/swapon.c:826
+msgid ""
+"\n"
+"Available discard policy types (for --discard):\n"
+" once : only single-time area discards are issued\n"
+" pages : freed pages are discarded before they are reused\n"
+"If no policy is selected, both discard types are enabled (default).\n"
+msgstr ""
+
+#: sys-utils/swapon.c:908
+#, fuzzy
+msgid "failed to parse priority"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/swapon.c:927
+#, fuzzy, c-format
+msgid "unsupported discard policy: %s"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/swapon-common.c:73
+#, c-format
+msgid "cannot find the device for %s"
+msgstr "找不到做為 %s 的裝置"
+
+#: sys-utils/switch_root.c:60
+#, fuzzy
+msgid "failed to open directory"
+msgstr "開啟目錄時失敗"
+
+#: sys-utils/switch_root.c:68
+#, fuzzy
+msgid "stat failed"
+msgstr "stat 失敗"
+
+#: sys-utils/switch_root.c:79
+#, fuzzy
+msgid "failed to read directory"
+msgstr "讀取目錄時失敗"
+
+#: sys-utils/switch_root.c:116
+#, fuzzy, c-format
+msgid "failed to unlink %s"
+msgstr "取消連結 %s 時失敗"
+
+#: sys-utils/switch_root.c:153
+#, fuzzy, c-format
+msgid "failed to mount moving %s to %s"
+msgstr "掛載移動 %s 到 %s 時失敗"
+
+#: sys-utils/switch_root.c:155
+#, fuzzy, c-format
+msgid "forcing unmount of %s"
+msgstr "強制卸載的 %s"
+
+#: sys-utils/switch_root.c:161
+#, fuzzy, c-format
+msgid "failed to change directory to %s"
+msgstr "變更目錄到 %s 時失敗"
+
+#: sys-utils/switch_root.c:173
+#, fuzzy, c-format
+msgid "failed to mount moving %s to /"
+msgstr "掛載移動 %s 到時失敗/"
+
+#: sys-utils/switch_root.c:179
+#, fuzzy
+msgid "failed to change root"
+msgstr "變更根時失敗"
+
+#: sys-utils/switch_root.c:192
+msgid "old root filesystem is not an initramfs"
+msgstr ""
+
+#: sys-utils/switch_root.c:205
+#, fuzzy, c-format
+msgid " %s [options] <newrootdir> <init> <args to init>\n"
+msgstr " %s [選項] <newrootdir><init><引數到 init>\n"
+
+#: sys-utils/switch_root.c:209
+msgid "Switch to another filesystem as the root of the mount tree.\n"
+msgstr ""
+
+#: sys-utils/switch_root.c:254
+#, fuzzy
+msgid "failed. Sorry."
+msgstr "失敗。抱歉。"
+
+#: sys-utils/switch_root.c:257
+#, fuzzy, c-format
+msgid "cannot access %s"
+msgstr "無法存取 %s"
+
+#: sys-utils/tunelp.c:98
+msgid "Set various parameters for the line printer.\n"
+msgstr ""
+
+#: sys-utils/tunelp.c:101
+#, fuzzy
+msgid " -i, --irq <num> specify parallel port irq\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/tunelp.c:102
+#, fuzzy
+msgid " -t, --time <ms> driver wait time in milliseconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+
+#: sys-utils/tunelp.c:103
+#, fuzzy
+msgid " -c, --chars <num> number of output characters before sleep\n"
+msgstr " -c, --chars <num> 輸出字元數的之前暫停\n"
+
+#: sys-utils/tunelp.c:104
+#, fuzzy
+msgid " -w, --wait <us> strobe wait in micro seconds\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+
+#. TRANSLATORS: do not translate <on|off> arguments. The
+#. argument reader does not recognize locale, unless `on' is
+#. exactly that very same string.
+#: sys-utils/tunelp.c:108
+#, fuzzy
+msgid " -a, --abort <on|off> abort on error\n"
+msgstr " -a, --abort <on|off> 放棄於錯誤\n"
+
+#: sys-utils/tunelp.c:109
+#, fuzzy
+msgid " -o, --check-status <on|off> check printer status before printing\n"
+msgstr " -o, --check-status <on|off> 檢查印表機狀態之前列印\n"
+
+#: sys-utils/tunelp.c:110
+#, fuzzy
+msgid " -C, --careful <on|off> extra checking to status check\n"
+msgstr " -C, --careful <on|off> 額外檢查到狀態檢查\n"
+
+#: sys-utils/tunelp.c:111
+#, fuzzy
+msgid " -s, --status query printer status\n"
+msgstr " -s, --status 查詢印表機狀態\n"
+
+#: sys-utils/tunelp.c:112
+#, fuzzy
+msgid " -r, --reset reset the port\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/tunelp.c:113
+#, fuzzy
+msgid " -q, --print-irq <on|off> display current irq setting\n"
+msgstr " -q, --print-irq <on|off> 顯示目前的 irq 設定\n"
+
+#: sys-utils/tunelp.c:258
+#, fuzzy, c-format
+msgid "%s not an lp device"
+msgstr "%s 不是 lp 裝置"
+
+#: sys-utils/tunelp.c:277
+msgid "LPGETSTATUS error"
+msgstr "LPGETSTATUS 錯誤"
+
+#: sys-utils/tunelp.c:282
+#, c-format
+msgid "%s status is %d"
+msgstr "%s 狀態為 %d"
+
+#: sys-utils/tunelp.c:284
+#, c-format
+msgid ", busy"
+msgstr "，忙碌中"
+
+#: sys-utils/tunelp.c:286
+#, c-format
+msgid ", ready"
+msgstr "，就緒"
+
+#: sys-utils/tunelp.c:288
+#, c-format
+msgid ", out of paper"
+msgstr "，紙張耗盡"
+
+#: sys-utils/tunelp.c:290
+#, c-format
+msgid ", on-line"
+msgstr "，上線"
+
+#: sys-utils/tunelp.c:292
+#, c-format
+msgid ", error"
+msgstr "，錯誤"
+
+#: sys-utils/tunelp.c:297
+#, fuzzy
+msgid "ioctl failed"
+msgstr "ioctl 失敗"
+
+#: sys-utils/tunelp.c:307
+msgid "LPGETIRQ error"
+msgstr "LPGETIRQ 錯誤"
+
+#: sys-utils/tunelp.c:312
+#, c-format
+msgid "%s using IRQ %d\n"
+msgstr "%s 正在使用 IRQ %d\n"
+
+#: sys-utils/tunelp.c:314
+#, c-format
+msgid "%s using polling\n"
+msgstr "%s 正在使用輪詢\n"
+
+#: sys-utils/umount.c:81
+#, fuzzy, c-format
+msgid ""
+" %1$s [-hV]\n"
+" %1$s -a [options]\n"
+" %1$s [options] <source> | <directory>\n"
+msgstr ""
+" %1$s [-hV]\n"
+" %1$s -a [選項]\n"
+" %1$s [選項] <source>|<目錄>\n"
+
+#: sys-utils/umount.c:87
+#, fuzzy
+msgid "Unmount filesystems.\n"
+msgstr "檔案系統型態"
+
+#: sys-utils/umount.c:90
+#, fuzzy
+msgid " -a, --all unmount all filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/umount.c:91
+msgid ""
+" -A, --all-targets unmount all mountpoints for the given device in the\n"
+" current namespace\n"
+msgstr ""
+
+#: sys-utils/umount.c:93
+msgid " -c, --no-canonicalize don't canonicalize paths\n"
+msgstr ""
+
+#: sys-utils/umount.c:94
+msgid " -d, --detach-loop if mounted loop device, also free this loop device\n"
+msgstr ""
+
+#: sys-utils/umount.c:95
+msgid " --fake dry run; skip the umount(2) syscall\n"
+msgstr ""
+
+#: sys-utils/umount.c:96
+msgid " -f, --force force unmount (in case of an unreachable NFS system)\n"
+msgstr ""
+
+#: sys-utils/umount.c:97
+msgid " -i, --internal-only don't call the umount.<type> helpers\n"
+msgstr ""
+
+#: sys-utils/umount.c:99
+#, fuzzy
+msgid " -l, --lazy detach the filesystem now, clean up things later\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/umount.c:100
+msgid " -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
+msgstr ""
+
+#: sys-utils/umount.c:101
+msgid " -R, --recursive recursively unmount a target with all its children\n"
+msgstr ""
+
+#: sys-utils/umount.c:102
+#, fuzzy
+msgid " -r, --read-only in case unmounting fails, try to remount read-only\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/umount.c:103
+#, fuzzy
+msgid " -t, --types <list> limit the set of filesystem types\n"
+msgstr " l 列出已知檔案系統類型"
+
+#: sys-utils/umount.c:105
+#, fuzzy
+msgid " -q, --quiet suppress 'not mounted' error messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: sys-utils/umount.c:106
+#, fuzzy
+msgid " -N, --namespace <ns> perform umount in another namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/umount.c:149
+#, fuzzy, c-format
+msgid "%s (%s) unmounted"
+msgstr "%s 被掛載\n"
+
+#: sys-utils/umount.c:151
+#, fuzzy, c-format
+msgid "%s unmounted"
+msgstr "%s：無法掛載"
+
+#: sys-utils/umount.c:220
+#, fuzzy
+msgid "failed to set umount target"
+msgstr "設定 umount 目標時失敗"
+
+#: sys-utils/umount.c:251
+#, fuzzy
+msgid "libmount table allocation failed"
+msgstr "libmount 語境配額失敗"
+
+#: sys-utils/umount.c:297 sys-utils/umount.c:379
+#, fuzzy
+msgid "libmount iterator allocation failed"
+msgstr "libmount 語境配額失敗"
+
+#: sys-utils/umount.c:303
+#, fuzzy, c-format
+msgid "failed to get child fs of %s"
+msgstr "提取舊的 %s 限制時失敗"
+
+#: sys-utils/umount.c:342 sys-utils/umount.c:366
+#, fuzzy, c-format
+msgid "%s: not found"
+msgstr "%s：找不到"
+
+#: sys-utils/umount.c:373
+#, c-format
+msgid "%s: failed to determine source (--all-targets is unsupported on systems with regular mtab file)."
+msgstr ""
+
+#: sys-utils/unshare.c:99
+#, fuzzy, c-format
+msgid "unsupported --setgroups argument '%s'"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/unshare.c:120 sys-utils/unshare.c:135
+#, fuzzy, c-format
+msgid "write failed %s"
+msgstr "寫入失敗：%s"
+
+#: sys-utils/unshare.c:158
+#, fuzzy, c-format
+msgid "unsupported propagation mode: %s"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/unshare.c:167
+#, fuzzy
+msgid "cannot change root filesystem propagation"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/unshare.c:198
+#, fuzzy, c-format
+msgid "mount %s on %s failed"
+msgstr "掛載 %s 於 %s 失敗"
+
+#: sys-utils/unshare.c:223
+#, fuzzy
+msgid "pipe failed"
+msgstr "openpty 失敗"
+
+#: sys-utils/unshare.c:237
+#, fuzzy
+msgid "failed to read pipe"
+msgstr "讀取速度時失敗"
+
+#: sys-utils/unshare.c:260
+msgid "Run a program with some namespaces unshared from the parent.\n"
+msgstr ""
+
+#: sys-utils/unshare.c:263
+#, fuzzy
+msgid " -m, --mount[=<file>] unshare mounts namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:264
+#, fuzzy
+msgid " -u, --uts[=<file>] unshare UTS namespace (hostname etc)\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:265
+#, fuzzy
+msgid " -i, --ipc[=<file>] unshare System V IPC namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:266
+#, fuzzy
+msgid " -n, --net[=<file>] unshare network namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:267
+#, fuzzy
+msgid " -p, --pid[=<file>] unshare pid namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:268
+#, fuzzy
+msgid " -U, --user[=<file>] unshare user namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:269
+#, fuzzy
+msgid " -C, --cgroup[=<file>] unshare cgroup namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:271
+#, fuzzy
+msgid " -f, --fork fork before launching <program>\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/unshare.c:272
+msgid " -r, --map-root-user map current user to root (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:273
+msgid " -c, --map-current-user map current user to itself (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:275
+msgid ""
+" --kill-child[=<signame>] when dying, kill the forked child (implies --fork)\n"
+" defaults to SIGKILL\n"
+msgstr ""
+
+#: sys-utils/unshare.c:277
+msgid " --mount-proc[=<dir>] mount proc filesystem first (implies --mount)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:278
+msgid ""
+" --propagation slave|shared|private|unchanged\n"
+" modify mount propagation in mount namespace\n"
+msgstr ""
+
+#: sys-utils/unshare.c:280
+msgid " --setgroups allow|deny control the setgroups syscall in user namespaces\n"
+msgstr ""
+
+#: sys-utils/unshare.c:281
+#, fuzzy
+msgid " --keep-caps retain capabilities granted in user namespaces\n"
+msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#: sys-utils/unshare.c:283
+#, fuzzy
+msgid " -R, --root=<dir>\t run the command with root directory set to <dir>\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/unshare.c:284
+#, fuzzy
+msgid " -w, --wd=<dir>\t change working directory to <dir>\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/unshare.c:285
+#, fuzzy
+msgid " -S, --setuid <uid>\t set uid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/unshare.c:286
+#, fuzzy
+msgid " -G, --setgid <gid>\t set gid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/unshare.c:398 sys-utils/unshare.c:406
+#, fuzzy
+msgid "options --map-root-user and --map-current-user are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/unshare.c:460
+msgid "unshare failed"
+msgstr "unshare 失敗"
+
+#: sys-utils/unshare.c:504
+#, fuzzy
+msgid "child exit failed"
+msgstr "識別號失敗"
+
+#: sys-utils/unshare.c:518
+#, fuzzy
+msgid "options --setgroups=allow and --map-root-user are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/unshare.c:527
+#, fuzzy
+msgid "options --setgroups=allow and --map-current-user are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/unshare.c:545
+#, fuzzy, c-format
+msgid "cannot change root directory to '%s'"
+msgstr "無法變更目錄到 %s"
+
+#: sys-utils/unshare.c:549
+#, fuzzy, c-format
+msgid "cannot chdir to '%s'"
+msgstr "無法變更目錄到 %s"
+
+#: sys-utils/unshare.c:553
+#, fuzzy, c-format
+msgid "umount %s failed"
+msgstr "掛載失敗"
+
+#: sys-utils/unshare.c:555
+#, fuzzy, c-format
+msgid "mount %s failed"
+msgstr "掛載失敗"
+
+#: sys-utils/unshare.c:581
+#, fuzzy
+msgid "capget failed"
+msgstr "寫入失敗"
+
+#: sys-utils/unshare.c:589
+#, fuzzy
+msgid "capset failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/unshare.c:601
+msgid "prctl(PR_CAP_AMBIENT) failed"
+msgstr ""
+
+#: sys-utils/wdctl.c:72
+#, fuzzy
+msgid "Card previously reset the CPU"
+msgstr "卡在之前重置 CPU"
+
+#: sys-utils/wdctl.c:73
+#, fuzzy
+msgid "External relay 1"
+msgstr "外部中繼 1"
+
+#: sys-utils/wdctl.c:74
+#, fuzzy
+msgid "External relay 2"
+msgstr "外部中繼 2"
+
+#: sys-utils/wdctl.c:75
+#, fuzzy
+msgid "Fan failed"
+msgstr "影迷失敗"
+
+#: sys-utils/wdctl.c:76
+#, fuzzy
+msgid "Keep alive ping reply"
+msgstr "保持活動狀態 ping 回覆"
+
+#: sys-utils/wdctl.c:77
+#, fuzzy
+msgid "Supports magic close char"
+msgstr "支援魔術關閉字元"
+
+#: sys-utils/wdctl.c:78
+#, fuzzy
+msgid "Reset due to CPU overheat"
+msgstr "重置由於 CPU overheat"
+
+#: sys-utils/wdctl.c:79
+#, fuzzy
+msgid "Power over voltage"
+msgstr "乘冪之上 voltage"
+
+#: sys-utils/wdctl.c:80
+#, fuzzy
+msgid "Power bad/power fault"
+msgstr "乘冪不當的/乘冪失誤"
+
+#: sys-utils/wdctl.c:81
+#, fuzzy
+msgid "Pretimeout (in seconds)"
+msgstr "Pretimeout (的秒數)"
+
+#: sys-utils/wdctl.c:82
+#, fuzzy
+msgid "Set timeout (in seconds)"
+msgstr "設定逾時 (的秒數)"
+
+#: sys-utils/wdctl.c:83
+msgid "Not trigger reboot"
+msgstr ""
+
+#: sys-utils/wdctl.c:99
+#, fuzzy
+msgid "flag name"
+msgstr "旗標名稱"
+
+#: sys-utils/wdctl.c:100
+#, fuzzy
+msgid "flag description"
+msgstr "旗標描述"
+
+#: sys-utils/wdctl.c:101
+#, fuzzy
+msgid "flag status"
+msgstr "旗標狀態"
+
+#: sys-utils/wdctl.c:102
+#, fuzzy
+msgid "flag boot status"
+msgstr "旗標開機狀態"
+
+#: sys-utils/wdctl.c:103
+#, fuzzy
+msgid "watchdog device name"
+msgstr "監視程式裝置名稱"
+
+#: sys-utils/wdctl.c:148
+#, fuzzy, c-format
+msgid "unknown flag: %s"
+msgstr "不明旗標：%s"
+
+#: sys-utils/wdctl.c:210
+msgid "Show the status of the hardware watchdog.\n"
+msgstr ""
+
+#: sys-utils/wdctl.c:213
+#, fuzzy
+msgid ""
+" -f, --flags <list> print selected flags only\n"
+" -F, --noflags don't print information about flags\n"
+" -I, --noident don't print watchdog identity information\n"
+" -n, --noheadings don't print headings for flags table\n"
+" -O, --oneline print all information on one line\n"
+" -o, --output <list> output columns of the flags\n"
+" -r, --raw use raw output format for flags table\n"
+" -T, --notimeouts don't print watchdog timeouts\n"
+" -s, --settimeout <sec> set watchdog timeout\n"
+" -x, --flags-only print only flags table (same as -I -T)\n"
+msgstr ""
+" -f, --flags <list> 列印已選旗標只有\n"
+" -F, --noflags 不列印相關資訊旗標\n"
+" -I, --noident 不列印監視程式身分資訊\n"
+" -n, --noheadings 不列印標頭用於旗標表格\n"
+" -O, --oneline 列印所有資訊於一個列\n"
+" -o, --output<清單> 輸出欄位的旗標\n"
+" -r, --raw 使用原始輸出格式用於旗標表格\n"
+" -T, --notimeouts 不列印監視程式逾時\n"
+" -s, --settimeout<sec>設定監視程式逾時\n"
+" -x, --flags-only 列印只有旗標表格 (如同 -I -T)\n"
+
+#: sys-utils/wdctl.c:229
+#, fuzzy, c-format
+msgid "The default device is %s.\n"
+msgstr "預設裝置是 %s。\n"
+
+#: sys-utils/wdctl.c:231
+#, fuzzy, c-format
+msgid "No default device is available.\n"
+msgstr "預設裝置是 %s。\n"
+
+#: sys-utils/wdctl.c:329
+#, fuzzy, c-format
+msgid "%s: unknown flags 0x%x\n"
+msgstr "%s：不明旗標 0x%x\n"
+
+#: sys-utils/wdctl.c:359
+#, fuzzy, c-format
+msgid "%s: watchdog already in use, terminating."
+msgstr "%s：監視程式已在使用中，終止。"
+
+#: sys-utils/wdctl.c:373 sys-utils/wdctl.c:438
+#, fuzzy, c-format
+msgid "%s: failed to disarm watchdog"
+msgstr "%s：無法 disarm 監視程式"
+
+#: sys-utils/wdctl.c:382
+#, fuzzy, c-format
+msgid "cannot set timeout for %s"
+msgstr "無法設定逾時用於 %s"
+
+#: sys-utils/wdctl.c:388
+#, fuzzy, c-format
+msgid "Timeout has been set to %d second.\n"
+msgid_plural "Timeout has been set to %d seconds.\n"
+msgstr[0] "從最後一次調整後經過的時間為 %d 秒\n"
+
+#: sys-utils/wdctl.c:417
+#, fuzzy, c-format
+msgid "%s: failed to get information about watchdog"
+msgstr "%s：無法提取相關資訊監視程式"
+
+#: sys-utils/wdctl.c:503
+#, fuzzy, c-format
+msgid "cannot read information about %s"
+msgstr "無法寫入 %s"
+
+#: sys-utils/wdctl.c:513 sys-utils/wdctl.c:516 sys-utils/wdctl.c:519
+#, fuzzy, c-format
+msgid "%-14s %2i second\n"
+msgid_plural "%-14s %2i seconds\n"
+msgstr[0] "%-15s%2i 秒\n"
+
+#: sys-utils/wdctl.c:514
+#, fuzzy
+msgid "Timeout:"
+msgstr "逾時："
+
+#: sys-utils/wdctl.c:517
+#, fuzzy
+msgid "Pre-timeout:"
+msgstr "Pre-timeout："
+
+#: sys-utils/wdctl.c:520
+#, fuzzy
+msgid "Timeleft:"
+msgstr "Timeleft："
+
+#: sys-utils/wdctl.c:576
+#, fuzzy
+msgid "Device:"
+msgstr "裝置："
+
+#: sys-utils/wdctl.c:578
+msgid "Identity:"
+msgstr ""
+
+#: sys-utils/wdctl.c:580
+msgid "version"
+msgstr ""
+
+#: sys-utils/wdctl.c:690
+#, fuzzy
+msgid "No default device is available."
+msgstr "預設裝置是 %s。\n"
+
+#: sys-utils/zramctl.c:75
+#, fuzzy
+msgid "zram device name"
+msgstr "裝置名稱"
+
+#: sys-utils/zramctl.c:76
+msgid "limit on the uncompressed amount of data"
+msgstr ""
+
+#: sys-utils/zramctl.c:77
+msgid "uncompressed size of stored data"
+msgstr ""
+
+#: sys-utils/zramctl.c:78
+msgid "compressed size of stored data"
+msgstr ""
+
+#: sys-utils/zramctl.c:79
+msgid "the selected compression algorithm"
+msgstr ""
+
+#: sys-utils/zramctl.c:80
+msgid "number of concurrent compress operations"
+msgstr ""
+
+#: sys-utils/zramctl.c:81
+#, fuzzy
+msgid "empty pages with no allocated memory"
+msgstr "配置記憶體時失敗"
+
+#: sys-utils/zramctl.c:82
+msgid "all memory including allocator fragmentation and metadata overhead"
+msgstr ""
+
+#: sys-utils/zramctl.c:83
+msgid "memory limit used to store compressed data"
+msgstr ""
+
+#: sys-utils/zramctl.c:84
+msgid "memory zram have been consumed to store compressed data"
+msgstr ""
+
+#: sys-utils/zramctl.c:85
+msgid "number of objects migrated by compaction"
+msgstr ""
+
+#: sys-utils/zramctl.c:378
+#, fuzzy
+msgid "Failed to parse mm_stat"
+msgstr "剖析開始時失敗"
+
+#: sys-utils/zramctl.c:539
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] <device>\n"
+" %1$s -r <device> [...]\n"
+" %1$s [options] -f | <device> -s <size>\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
+
+#: sys-utils/zramctl.c:545
+msgid "Set up and control zram devices.\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:548
+msgid " -a, --algorithm lzo|lz4|lz4hc|deflate|842 compression algorithm to use\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:549
+#, fuzzy
+msgid " -b, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/zramctl.c:550
+#, fuzzy
+msgid " -f, --find find a free device\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/zramctl.c:551
+#, fuzzy
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/zramctl.c:552
+#, fuzzy
+msgid " -o, --output <list> columns to use for status output\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/zramctl.c:553
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/zramctl.c:554
+#, fuzzy
+msgid " --raw use raw status output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/zramctl.c:555
+#, fuzzy
+msgid " -r, --reset reset all specified devices\n"
+msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+
+#: sys-utils/zramctl.c:556
+#, fuzzy
+msgid " -s, --size <size> device size\n"
+msgstr " -o, --office <office> 辦公室數字\n"
+
+#: sys-utils/zramctl.c:557
+msgid " -t, --streams <number> number of compression streams\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:649
+#, fuzzy
+msgid "failed to parse streams"
+msgstr "剖析開始時失敗"
+
+#: sys-utils/zramctl.c:671
+#, fuzzy
+msgid "option --find is mutually exclusive with <device>"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/zramctl.c:677
+msgid "only one <device> at a time is allowed"
+msgstr ""
+
+#: sys-utils/zramctl.c:680
+msgid "options --algorithm and --streams must be combined with --size"
+msgstr ""
+
+#: sys-utils/zramctl.c:713 sys-utils/zramctl.c:742
+#, fuzzy, c-format
+msgid "%s: failed to reset"
+msgstr "%s：無法剖析"
+
+#: sys-utils/zramctl.c:724 sys-utils/zramctl.c:732
+msgid "no free zram device found"
+msgstr ""
+
+#: sys-utils/zramctl.c:746
+#, fuzzy, c-format
+msgid "%s: failed to set number of streams"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/zramctl.c:750
+#, fuzzy, c-format
+msgid "%s: failed to set algorithm"
+msgstr "%s：無法設定上一步檔案"
+
+#: sys-utils/zramctl.c:753
+#, fuzzy, c-format
+msgid "%s: failed to set disksize (%ju bytes)"
+msgstr "%s：無法提取 whole-disk 裝置編號"
+
+#: term-utils/agetty.c:492
+#, c-format
+msgid "%s%s (automatic login)\n"
+msgstr ""
+
+#: term-utils/agetty.c:549
+#, fuzzy, c-format
+msgid "%s: can't change root directory %s: %m"
+msgstr "%s：無法變更根目錄 %s：%m"
+
+#: term-utils/agetty.c:552
+#, fuzzy, c-format
+msgid "%s: can't change working directory %s: %m"
+msgstr "%s：無法變更工作目錄 %s：%m"
+
+#: term-utils/agetty.c:555
+#, fuzzy, c-format
+msgid "%s: can't change process priority: %m"
+msgstr "%s：無法變更處理優先權：%m"
+
+#: term-utils/agetty.c:566
+#, c-format
+msgid "%s: can't exec %s: %m"
+msgstr "%s：無法 exec %s: %m"
+
+#: term-utils/agetty.c:597 term-utils/agetty.c:930 term-utils/agetty.c:1466
+#: term-utils/agetty.c:1484 term-utils/agetty.c:1521 term-utils/agetty.c:1531
+#: term-utils/agetty.c:1573 term-utils/agetty.c:2277 term-utils/agetty.c:2841
+#, fuzzy, c-format
+msgid "failed to allocate memory: %m"
+msgstr "配置記憶體時失敗：%m"
+
+#: term-utils/agetty.c:773
+#, fuzzy
+msgid "invalid delay argument"
+msgstr "無效的前端引數"
+
+#: term-utils/agetty.c:811
+#, fuzzy
+msgid "invalid argument of --local-line"
+msgstr "無效的引數到 --auto /-a 選項"
+
+#: term-utils/agetty.c:830
+#, fuzzy
+msgid "invalid nice argument"
+msgstr "無效的時間引數"
+
+#: term-utils/agetty.c:935
+#, c-format
+msgid "bad speed: %s"
+msgstr "不當的速度：%s"
+
+#: term-utils/agetty.c:937
+msgid "too many alternate speeds"
+msgstr "太多交替速度"
+
+#: term-utils/agetty.c:1044 term-utils/agetty.c:1048 term-utils/agetty.c:1101
+#, c-format
+msgid "/dev/%s: cannot open as standard input: %m"
+msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+
+#: term-utils/agetty.c:1067
+#, c-format
+msgid "/dev/%s: not a character device"
+msgstr "/dev/%s: 不是字元裝置"
+
+#: term-utils/agetty.c:1069
+#, fuzzy, c-format
+msgid "/dev/%s: not a tty"
+msgstr "%s：不是 tty"
+
+#: term-utils/agetty.c:1073 term-utils/agetty.c:1105
+#, fuzzy, c-format
+msgid "/dev/%s: cannot get controlling tty: %m"
+msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+
+#: term-utils/agetty.c:1095
+#, fuzzy, c-format
+msgid "/dev/%s: vhangup() failed: %m"
+msgstr "%s：calloc() 失敗：%s\n"
+
+#: term-utils/agetty.c:1116
+#, c-format
+msgid "%s: not open for read/write"
+msgstr "%s：無法開啟用於讀取/寫入"
+
+#: term-utils/agetty.c:1121
+#, fuzzy, c-format
+msgid "/dev/%s: cannot set process group: %m"
+msgstr "%s：無法變更處理優先權：%m"
+
+#: term-utils/agetty.c:1135
+#, c-format
+msgid "%s: dup problem: %m"
+msgstr "%s：dup 問題：%m"
+
+#: term-utils/agetty.c:1152
+#, fuzzy, c-format
+msgid "%s: failed to get terminal attributes: %m"
+msgstr "無法取得終端機屬性用於 %s"
+
+#: term-utils/agetty.c:1363 term-utils/agetty.c:1392
+#, fuzzy, c-format
+msgid "setting terminal attributes failed: %m"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: term-utils/agetty.c:1511
+#, fuzzy
+msgid "cannot open os-release file"
+msgstr "無法開啟鎖定檔案 %s"
+
+#: term-utils/agetty.c:1678
+#, fuzzy, c-format
+msgid "failed to create reload file: %s: %m"
+msgstr "讀取 typescript 檔案 %s 時失敗"
+
+#: term-utils/agetty.c:1988
+#, fuzzy, c-format
+msgid "failed to get terminal attributes: %m"
+msgstr "無法取得終端機屬性用於 %s"
+
+#: term-utils/agetty.c:2010
+msgid "[press ENTER to login]"
+msgstr ""
+
+#: term-utils/agetty.c:2037
+#, fuzzy
+msgid "Num Lock off"
+msgstr "Num 鎖定關閉"
+
+#: term-utils/agetty.c:2040
+#, fuzzy
+msgid "Num Lock on"
+msgstr "Num 鎖定開"
+
+#: term-utils/agetty.c:2043
+#, fuzzy
+msgid "Caps Lock on"
+msgstr "大寫鍵開"
+
+#: term-utils/agetty.c:2046
+#, fuzzy
+msgid "Scroll Lock on"
+msgstr "捲動鎖定開"
+
+#: term-utils/agetty.c:2049
+#, fuzzy, c-format
+msgid ""
+"Hint: %s\n"
+"\n"
+msgstr ""
+"提示：%s\n"
+"\n"
+
+#: term-utils/agetty.c:2191
+#, c-format
+msgid "%s: read: %m"
+msgstr "%s：讀取：%m"
+
+#: term-utils/agetty.c:2253
+#, c-format
+msgid "%s: input overrun"
+msgstr "%s：輸入超出"
+
+#: term-utils/agetty.c:2273 term-utils/agetty.c:2281
+#, c-format
+msgid "%s: invalid character conversion for login name"
+msgstr ""
+
+#: term-utils/agetty.c:2287
+#, c-format
+msgid "%s: invalid character 0x%x in login name"
+msgstr ""
+
+#: term-utils/agetty.c:2372
+#, fuzzy, c-format
+msgid "%s: failed to set terminal attributes: %m"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: term-utils/agetty.c:2410
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] <line> [<baud_rate>,...] [<termtype>]\n"
+" %1$s [options] <baud_rate>,... <line> [<termtype>]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %1$s [選項] 列 baud_rate ,...[termtype]\n"
+" %1$s [選項] baud_rate ,...列 [termtype]\n"
+
+#: term-utils/agetty.c:2414
+msgid "Open a terminal and set its mode.\n"
+msgstr ""
+
+#: term-utils/agetty.c:2417
+#, fuzzy
+msgid " -8, --8bits assume 8-bit tty\n"
+msgstr " -s, --status 查詢印表機狀態\n"
+
+#: term-utils/agetty.c:2418
+msgid " -a, --autologin <user> login the specified user automatically\n"
+msgstr ""
+
+#: term-utils/agetty.c:2419
+#, fuzzy
+msgid " -c, --noreset do not reset control mode\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/agetty.c:2420
+#, fuzzy
+msgid " -E, --remote use -r <hostname> for login(1)\n"
+msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+
+#: term-utils/agetty.c:2421
+#, fuzzy
+msgid " -f, --issue-file <file> display issue file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/agetty.c:2422
+#, fuzzy
+msgid " --show-issue display issue file and exit\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/agetty.c:2423
+msgid " -h, --flow-control enable hardware flow control\n"
+msgstr ""
+
+#: term-utils/agetty.c:2424
+#, fuzzy
+msgid " -H, --host <hostname> specify login host\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
+
+#: term-utils/agetty.c:2425
+#, fuzzy
+msgid " -i, --noissue do not display issue file\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/agetty.c:2426
+msgid " -I, --init-string <string> set init string\n"
+msgstr ""
+
+#: term-utils/agetty.c:2427
+#, fuzzy
+msgid " -J --noclear do not clear the screen before prompt\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/agetty.c:2428
+msgid " -l, --login-program <file> specify login program\n"
+msgstr ""
+
+#: term-utils/agetty.c:2429
+#, fuzzy
+msgid " -L, --local-line[=<mode>] control the local line flag\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: term-utils/agetty.c:2430
+msgid " -m, --extract-baud extract baud rate during connect\n"
+msgstr ""
+
+#: term-utils/agetty.c:2431
+#, fuzzy
+msgid " -n, --skip-login do not prompt for login\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2432
+#, fuzzy
+msgid " -N --nonewline do not print a newline before issue\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: term-utils/agetty.c:2433
+#, fuzzy
+msgid " -o, --login-options <opts> options that are passed to login\n"
+msgstr " -l, --longoptions <longopts> 長選項為辨識的\n"
+
+#: term-utils/agetty.c:2434
+#, fuzzy
+msgid " -p, --login-pause wait for any key before the login\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2435
+#, fuzzy
+msgid " -r, --chroot <dir> change root to the directory\n"
+msgstr " -a, --abort <on|off> 放棄於錯誤\n"
+
+#: term-utils/agetty.c:2436
+#, fuzzy
+msgid " -R, --hangup do virtually hangup on the tty\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: term-utils/agetty.c:2437
+#, fuzzy
+msgid " -s, --keep-baud try to keep baud rate after break\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: term-utils/agetty.c:2438
+msgid " -t, --timeout <number> login process timeout\n"
+msgstr ""
+
+#: term-utils/agetty.c:2439
+msgid " -U, --detect-case detect uppercase terminal\n"
+msgstr ""
+
+#: term-utils/agetty.c:2440
+#, fuzzy
+msgid " -w, --wait-cr wait carriage-return\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+
+#: term-utils/agetty.c:2441
+#, fuzzy
+msgid " --nohints do not print hints\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2442
+#, fuzzy
+msgid " --nohostname no hostname at all will be shown\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: term-utils/agetty.c:2443
+msgid " --long-hostname show full qualified hostname\n"
+msgstr ""
+
+#: term-utils/agetty.c:2444
+msgid " --erase-chars <string> additional backspace chars\n"
+msgstr ""
+
+#: term-utils/agetty.c:2445
+msgid " --kill-chars <string> additional kill chars\n"
+msgstr ""
+
+#: term-utils/agetty.c:2446
+msgid " --chdir <directory> chdir before the login\n"
+msgstr ""
+
+#: term-utils/agetty.c:2447
+#, fuzzy
+msgid " --delay <number> sleep seconds before prompt\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/agetty.c:2448
+msgid " --nice <number> run login with this priority\n"
+msgstr ""
+
+#: term-utils/agetty.c:2449
+#, fuzzy
+msgid " --reload reload prompts on running agetty instances\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2450
+#, fuzzy
+msgid " --list-speeds display supported baud rates\n"
+msgstr " -T [或 --list-types]：列出已知分割區類型"
+
+#: term-utils/agetty.c:2798
+#, fuzzy, c-format
+msgid "%d user"
+msgid_plural "%d users"
+msgstr[0] "使用者"
+
+#: term-utils/agetty.c:2929
+#, fuzzy, c-format
+msgid "checkname failed: %m"
+msgstr "chown 失敗：%s"
+
+#: term-utils/agetty.c:2941
+#, fuzzy, c-format
+msgid "cannot touch file %s"
+msgstr "無法關閉檔案 %s"
+
+#: term-utils/agetty.c:2945
+msgid "--reload is unsupported on your system"
+msgstr ""
+
+#: term-utils/mesg.c:78
+#, fuzzy, c-format
+msgid " %s [options] [y | n]\n"
+msgstr " %s [選項] [y|n]\n"
+
+#: term-utils/mesg.c:81
+#, fuzzy
+msgid "Control write access of other users to your terminal.\n"
+msgstr "寫入存取到您的終端機被拒絕"
+
+#: term-utils/mesg.c:84
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: term-utils/mesg.c:130
+msgid "no tty"
+msgstr ""
+
+#: term-utils/mesg.c:139
+#, c-format
+msgid "ttyname() failed, attempting to go around using: %s"
+msgstr ""
+
+#: term-utils/mesg.c:150
+#, fuzzy
+msgid "is y"
+msgstr "是 y"
+
+#: term-utils/mesg.c:153
+#, fuzzy
+msgid "is n"
+msgstr "是 n"
+
+#: term-utils/mesg.c:164 term-utils/mesg.c:171
+#, fuzzy, c-format
+msgid "change %s mode failed"
+msgstr "變更 %s 模式失敗"
+
+#: term-utils/mesg.c:166
+#, fuzzy
+msgid "write access to your terminal is allowed"
+msgstr "寫入存取到您的終端機被允許"
+
+#: term-utils/mesg.c:173
+#, fuzzy
+msgid "write access to your terminal is denied"
+msgstr "寫入存取到您的終端機被拒絕"
+
+#: term-utils/script.c:190
+#, fuzzy, c-format
+msgid " %s [options] [file]\n"
+msgstr " %s [選項] [檔案]\n"
+
+#: term-utils/script.c:193
+msgid "Make a typescript of a terminal session.\n"
+msgstr ""
+
+#: term-utils/script.c:196
+#, fuzzy
+msgid " -I, --log-in <file> log stdin to file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/script.c:197
+#, fuzzy
+msgid " -O, --log-out <file> log stdout to file (default)\n"
+msgstr " -a, --all 所有 (預設)\n"
+
+#: term-utils/script.c:198
+#, fuzzy
+msgid " -B, --log-io <file> log stdin and stdout to file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/script.c:201
+#, fuzzy
+msgid " -T, --log-timing <file> log timing information to file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/script.c:202
+msgid " -t[<file>], --timing[=<file>] deprecated alias to -T (default file is stderr)\n"
+msgstr ""
+
+#: term-utils/script.c:203
+msgid " -m, --logging-format <name> force to 'classic' or 'advanced' format\n"
+msgstr ""
+
+#: term-utils/script.c:206
+#, fuzzy
+msgid " -a, --append append to the log file\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: term-utils/script.c:207
+#, fuzzy
+msgid " -c, --command <command> run command rather than interactive shell\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: term-utils/script.c:208
+#, fuzzy
+msgid " -e, --return return exit code of the child process\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/script.c:209
+#, fuzzy
+msgid " -f, --flush run flush after each write\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: term-utils/script.c:210
+#, fuzzy
+msgid " --force use output file even when it is a link\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: term-utils/script.c:211
+#, fuzzy
+msgid " -E, --echo <when> echo input (auto, always or never)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: term-utils/script.c:212
+#, fuzzy
+msgid " -o, --output-limit <size> terminate if output files exceed size\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: term-utils/script.c:213
+#, fuzzy
+msgid " -q, --quiet be quiet\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: term-utils/script.c:296
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Script done on %s [<%s>]\n"
+msgstr ""
+"\n"
+"命令稿已於 %s 完成"
+
+#: term-utils/script.c:298
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Script done on %s [COMMAND_EXIT_CODE=\"%d\"]\n"
+msgstr ""
+"\n"
+"命令稿已於 %s 完成"
+
+#: term-utils/script.c:394
+#, fuzzy, c-format
+msgid "Script started on %s ["
+msgstr "命令稿啟動於 %s"
+
+#: term-utils/script.c:406
+#, c-format
+msgid "<not executed on terminal>"
+msgstr ""
+
+#: term-utils/script.c:680
+#, c-format
+msgid "Script terminated, max output files size %<PRIu64> exceeded.\n"
+msgstr ""
+
+#: term-utils/script.c:682
+msgid "max output size exceeded"
+msgstr ""
+
+#: term-utils/script.c:743
+#, fuzzy, c-format
+msgid ""
+"output file `%s' is a link\n"
+"Use --force if you really want to use it.\n"
+"Program not started."
+msgstr ""
+"輸出檔案『%s』是鏈結\n"
+"使用 --force 如果您真的要使用它。\n"
+"程式無法開始。"
+
+#: term-utils/script.c:827
+#, fuzzy, c-format
+msgid "unssuported echo mode: '%s'"
+msgstr "不受支援的命令"
+
+#: term-utils/script.c:852
+#, fuzzy
+msgid "failed to parse output limit size"
+msgstr "剖析 %s 限制時失敗"
+
+#: term-utils/script.c:863
+#, fuzzy, c-format
+msgid "unssuported logging format: '%s'"
+msgstr "不受支援的引數：%s"
+
+#: term-utils/script.c:911
+#, fuzzy
+msgid "log multiple streams is mutually exclusive with 'classic' format"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: term-utils/script.c:938
+#, fuzzy, c-format
+msgid "Script started"
+msgstr "命令稿啟動於 %s"
+
+#: term-utils/script.c:940
+#, fuzzy, c-format
+msgid ", output log file is '%s'"
+msgstr "命令稿已完成，檔案是 %s\n"
+
+#: term-utils/script.c:942
+#, fuzzy, c-format
+msgid ", input log file is '%s'"
+msgstr "命令稿已完成，檔案是 %s\n"
+
+#: term-utils/script.c:944
+#, fuzzy, c-format
+msgid ", timing file is '%s'"
+msgstr "無法開啟時序檔案 %s"
+
+#: term-utils/script.c:945
+#, fuzzy, c-format
+msgid ".\n"
+msgstr "\n"
+
+#: term-utils/script.c:1051
+#, fuzzy, c-format
+msgid "Script done.\n"
+msgstr "命令稿已完成，檔案是 %s\n"
+
+#: term-utils/scriptlive.c:60
+#, fuzzy, c-format
+msgid " %s [-t] timingfile [-I|-B] typescript\n"
+msgstr " %s [-t] timingfile [typescript] [除數]\n"
+
+#: term-utils/scriptlive.c:64
+msgid "Execute terminal typescript.\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:67 term-utils/scriptreplay.c:56
+#, fuzzy
+msgid " -t, --timing <file> script timing log file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/scriptlive.c:68
+msgid " -T, --log-timing <file> alias to -t\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:69 term-utils/scriptreplay.c:58
+#, fuzzy
+msgid " -I, --log-in <file> script stdin log file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/scriptlive.c:70 term-utils/scriptreplay.c:60
+msgid " -B, --log-io <file> script stdin and stdout log file\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:73
+#, fuzzy
+msgid " -c, --command <command> run command rather than interactive shell\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: term-utils/scriptlive.c:74 term-utils/scriptreplay.c:66
+msgid " -d, --divisor <num> speed up or slow down execution with time divisor\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:75 term-utils/scriptreplay.c:67
+#, fuzzy
+msgid " -m, --maxdelay <num> wait at most this many seconds between updates\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/scriptlive.c:226 term-utils/scriptreplay.c:212
+#, fuzzy
+msgid "failed to parse maximal delay argument"
+msgstr "剖析引數時失敗"
+
+#: term-utils/scriptlive.c:249 term-utils/scriptreplay.c:253
+#, fuzzy
+msgid "timing file not specified"
+msgstr "沒有檔案指定的"
+
+#: term-utils/scriptlive.c:251
+#, fuzzy
+msgid "stdin typescript file not specified"
+msgstr "沒有輸入檔案指定的"
+
+#: term-utils/scriptlive.c:277
+#, c-format
+msgid ">>> scriptlive: Starting your typescript execution by %s.\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:284
+#, fuzzy
+msgid "failed to allocate PTY handler"
+msgstr "配置迭代器時失敗"
+
+#: term-utils/scriptlive.c:363
+#, c-format
+msgid ""
+"\n"
+">>> scriptlive: done.\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:49
+#, fuzzy, c-format
+msgid " %s [-t] timingfile [typescript] [divisor]\n"
+msgstr " %s [-t] timingfile [typescript] [除數]\n"
+
+#: term-utils/scriptreplay.c:53
+msgid "Play back terminal typescripts, using timing information.\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:57
+msgid " -T, --log-timing <file> aliast to -t\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:59
+#, fuzzy
+msgid " -O, --log-out <file> script stdout log file (default)\n"
+msgstr " -a, --all 所有 (預設)\n"
+
+#: term-utils/scriptreplay.c:62
+msgid " -s, --typescript <file> deprecated alias to -O\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:65
+#, fuzzy
+msgid " --summary display overview about recorded session and exit\n"
+msgstr " -V 輸出版本資訊然後離開\n"
+
+#: term-utils/scriptreplay.c:68
+msgid " -x, --stream <name> stream type (out, in, signal or info)\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:69
+msgid " -c, --cr-mode <type> CR char mode (auto, never, always)\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:191
+#, fuzzy, c-format
+msgid "unsupported mode name: '%s'"
+msgstr "不受支援的引數：%s"
+
+#: term-utils/scriptreplay.c:224
+#, fuzzy, c-format
+msgid "unsupported stream name: '%s'"
+msgstr "不受支援的引數：%s"
+
+#: term-utils/scriptreplay.c:255
+#, fuzzy
+msgid "data log file not specified"
+msgstr "沒有檔案指定的"
+
+#: term-utils/scriptreplay.c:304
+#, fuzzy, c-format
+msgid "%s: log file error"
+msgstr "klogctl 錯誤"
+
+#: term-utils/scriptreplay.c:306
+#, c-format
+msgid "%s: line %d: timing file error"
+msgstr ""
+
+#: term-utils/setterm.c:237
+#, fuzzy, c-format
+msgid "argument error: bright %s is not supported"
+msgstr "速度 %d 不受支援"
+
+#: term-utils/setterm.c:329
+#, fuzzy
+msgid "too many tabs"
+msgstr "太多引數"
+
+#: term-utils/setterm.c:385
+msgid "Set the attributes of a terminal.\n"
+msgstr ""
+
+#: term-utils/setterm.c:388
+#, fuzzy
+msgid " --term <terminal_name> override TERM environment variable\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:389
+#, fuzzy
+msgid " --reset reset terminal to power-on state\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:390
+#, fuzzy
+msgid " --resize reset terminal rows and columns\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:391
+#, fuzzy
+msgid " --initialize display init string, and use default settings\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/setterm.c:392
+#, fuzzy
+msgid " --default use default terminal settings\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/setterm.c:393
+#, fuzzy
+msgid " --store save current terminal settings as default\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/setterm.c:396
+#, fuzzy
+msgid " --cursor on|off display cursor\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: term-utils/setterm.c:397
+#, fuzzy
+msgid " --repeat on|off keyboard repeat\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:398
+msgid " --appcursorkeys on|off cursor key application mode\n"
+msgstr ""
+
+#: term-utils/setterm.c:399
+#, fuzzy
+msgid " --linewrap on|off continue on a new line when a line is full\n"
+msgstr " -h, --help 這個小用法指導\n"
+
+#: term-utils/setterm.c:400
+msgid " --inversescreen on|off swap colors for the whole screen\n"
+msgstr ""
+
+#: term-utils/setterm.c:403
+#, fuzzy
+msgid " --msg on|off send kernel messages to console\n"
+msgstr " -s 列印訊息到標準輸出\n"
+
+#: term-utils/setterm.c:404
+#, fuzzy
+msgid " --msglevel <0-8> kernel console log level\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: term-utils/setterm.c:407
+msgid " --foreground default|<color> set foreground color\n"
+msgstr ""
+
+#: term-utils/setterm.c:408
+msgid " --background default|<color> set background color\n"
+msgstr ""
+
+#: term-utils/setterm.c:409
+msgid " --ulcolor [bright] <color> set underlined text color\n"
+msgstr ""
+
+#: term-utils/setterm.c:410
+msgid " --hbcolor [bright] <color> set half-bright text color\n"
+msgstr ""
+
+#: term-utils/setterm.c:411
+msgid " <color>: black blue cyan green grey magenta red white yellow\n"
+msgstr ""
+
+#: term-utils/setterm.c:414
+#, fuzzy
+msgid " --bold on|off bold\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: term-utils/setterm.c:415
+#, fuzzy
+msgid " --half-bright on|off dim\n"
+msgstr " [ -half-bright [on|off] ]\n"
+
+#: term-utils/setterm.c:416
+#, fuzzy
+msgid " --blink on|off blink\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: term-utils/setterm.c:417
+#, fuzzy
+msgid " --underline on|off underline\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: term-utils/setterm.c:418
+msgid " --reverse on|off swap foreground and background colors\n"
+msgstr ""
+
+#: term-utils/setterm.c:421
+#, fuzzy
+msgid " --clear[=<all|rest>] clear screen and set cursor position\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/setterm.c:422
+msgid " --tabs[=<number>...] set these tab stop positions, or show them\n"
+msgstr ""
+
+#: term-utils/setterm.c:423
+msgid " --clrtabs[=<number>...] clear these tab stop positions, or all\n"
+msgstr ""
+
+#: term-utils/setterm.c:424
+msgid " --regtabs[=1-160] set a regular tab stop interval\n"
+msgstr ""
+
+#: term-utils/setterm.c:425
+msgid " --blank[=0-60|force|poke] set time of inactivity before screen blanks\n"
+msgstr ""
+
+#: term-utils/setterm.c:428
+msgid " --dump[=<number>] write vcsa<number> console dump to file\n"
+msgstr ""
+
+#: term-utils/setterm.c:429
+#, fuzzy
+msgid " --append <number> append vcsa<number> console dump to file\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: term-utils/setterm.c:430
+#, fuzzy
+msgid " --file <filename> name of the dump file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/setterm.c:433
+#, fuzzy
+msgid " --powersave on|vsync|hsync|powerdown|off\n"
+msgstr " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
+
+#: term-utils/setterm.c:434
+#, fuzzy
+msgid " set vesa powersaving features\n"
+msgstr " 「%s」)\n"
+
+#: term-utils/setterm.c:435
+msgid " --powerdown[=<0-60>] set vesa powerdown interval in minutes\n"
+msgstr ""
+
+#: term-utils/setterm.c:438
+#, fuzzy
+msgid " --blength[=<0-2000>] duration of the bell in milliseconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+
+#: term-utils/setterm.c:439
+msgid " --bfreq[=<number>] bell frequency in Hertz\n"
+msgstr ""
+
+#: term-utils/setterm.c:452
+msgid "duplicate use of an option"
+msgstr ""
+
+#: term-utils/setterm.c:764
+#, fuzzy
+msgid "cannot force blank"
+msgstr "無法強制空白"
+
+#: term-utils/setterm.c:769
+#, fuzzy
+msgid "cannot force unblank"
+msgstr "無法強制 unblank"
+
+#: term-utils/setterm.c:775
+#, fuzzy
+msgid "cannot get blank status"
+msgstr "無法提取空白狀態"
+
+#: term-utils/setterm.c:801
+#, fuzzy, c-format
+msgid "cannot open dump file %s for output"
+msgstr "無法開啟傾印檔案 %s 用於輸出"
+
+#: term-utils/setterm.c:843
+#, fuzzy, c-format
+msgid "terminal %s does not support %s"
+msgstr "使用者 %s 不存在"
+
+#: term-utils/setterm.c:881
+#, fuzzy
+msgid "select failed"
+msgstr "semctl 失敗"
+
+#: term-utils/setterm.c:907
+#, fuzzy
+msgid "stdin does not refer to a terminal"
+msgstr "%s 於此終端機被拒絕登入。\n"
+
+#: term-utils/setterm.c:935
+#, fuzzy, c-format
+msgid "invalid cursor position: %s"
+msgstr "無效的選項"
+
+#: term-utils/setterm.c:957
+#, fuzzy
+msgid "reset failed"
+msgstr "setgid 失敗"
+
+#: term-utils/setterm.c:1121
+#, fuzzy
+msgid "cannot (un)set powersave mode"
+msgstr "無法 (un) 設定 powersave 模式"
+
+#: term-utils/setterm.c:1140 term-utils/setterm.c:1149
+#, fuzzy
+msgid "klogctl error"
+msgstr "klogctl 錯誤"
+
+#: term-utils/setterm.c:1170
+#, fuzzy
+msgid "$TERM is not defined."
+msgstr "$TERM 未被定義。"
+
+#: term-utils/setterm.c:1177
+#, fuzzy
+msgid "terminfo database cannot be found"
+msgstr "terminfo 資料庫無法找到"
+
+#: term-utils/setterm.c:1179
+#, fuzzy, c-format
+msgid "%s: unknown terminal type"
+msgstr "%s：不明終端機類型"
+
+#: term-utils/setterm.c:1181
+#, fuzzy
+msgid "terminal is hardcopy"
+msgstr "終端機是 hardcopy"
+
+#: term-utils/ttymsg.c:81
+#, fuzzy, c-format
+msgid "internal error: too many iov's"
+msgstr "內部錯誤"
+
+#: term-utils/ttymsg.c:94
+#, c-format
+msgid "excessively long line arg"
+msgstr "過長的命令列引數"
+
+#: term-utils/ttymsg.c:108
+#, fuzzy, c-format
+msgid "open failed"
+msgstr "openpty 失敗"
+
+#: term-utils/ttymsg.c:147
+#, fuzzy, c-format
+msgid "fork: %m"
+msgstr "衍生：%s"
+
+#: term-utils/ttymsg.c:149
+#, c-format
+msgid "cannot fork"
+msgstr "無法衍生執行"
+
+#: term-utils/ttymsg.c:182
+#, fuzzy, c-format
+msgid "%s: BAD ERROR, message is far too long"
+msgstr "%s：不當的錯誤，訊息是 far 太長"
+
+#: term-utils/wall.c:87
+#, fuzzy, c-format
+msgid " %s [options] [<file> | <message>]\n"
+msgstr " %s [選項] [訊息]\n"
+
+#: term-utils/wall.c:90
+msgid "Write a message to all users.\n"
+msgstr ""
+
+#: term-utils/wall.c:93
+#, fuzzy
+msgid " -g, --group <group> only send message to group\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: term-utils/wall.c:94
+#, fuzzy
+msgid " -n, --nobanner do not print banner, works only for root\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: term-utils/wall.c:95
+#, fuzzy
+msgid " -t, --timeout <timeout> write timeout in seconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+
+#: term-utils/wall.c:123
+#, fuzzy
+msgid "invalid group argument"
+msgstr "無效的速度引數"
+
+#: term-utils/wall.c:125
+#, fuzzy, c-format
+msgid "%s: unknown gid"
+msgstr "%c: 不明的命令\n"
+
+#: term-utils/wall.c:168
+msgid "getgrouplist found more groups than sysconf allows"
+msgstr ""
+
+#: term-utils/wall.c:214
+#, fuzzy
+msgid "--nobanner is available only for root"
+msgstr "--nobanner 是可用只有用於根"
+
+#: term-utils/wall.c:219
+#, fuzzy, c-format
+msgid "invalid timeout argument: %s"
+msgstr "無效的逾時引數：%s"
+
+#: term-utils/wall.c:360
+#, fuzzy
+msgid "cannot get passwd uid"
+msgstr "無法提取 passwd uid"
+
+#: term-utils/wall.c:384
+#, fuzzy, c-format
+msgid "Broadcast message from %s@%s (%s) (%s):"
+msgstr "廣播訊息來自 %s@%s"
+
+#: term-utils/wall.c:417
+#, fuzzy, c-format
+msgid "will not read %s - use stdin."
+msgstr "將無法讀取 %s - 使用標準輸入。"
+
+#: term-utils/write.c:87
+#, fuzzy, c-format
+msgid " %s [options] <user> [<ttyname>]\n"
+msgstr " %s [選項] <user> [<ttyname>]\n"
+
+#: term-utils/write.c:91
+msgid "Send a message to another user.\n"
+msgstr ""
+
+#: term-utils/write.c:116
+#, c-format
+msgid "effective gid does not match group of %s"
+msgstr ""
+
+#: term-utils/write.c:201
+#, fuzzy, c-format
+msgid "%s is not logged in"
+msgstr "%s 未被登入"
+
+#: term-utils/write.c:206
+#, fuzzy
+msgid "can't find your tty's name"
+msgstr "找不到您的 tty's 名稱"
+
+#: term-utils/write.c:211
+#, fuzzy, c-format
+msgid "%s has messages disabled"
+msgstr "%s 有訊息已停用"
+
+#: term-utils/write.c:214
+#, fuzzy, c-format
+msgid "%s is logged in more than once; writing to %s"
+msgstr "%s 被登入一次以上；寫入 %s"
+
+#: term-utils/write.c:237
+#, fuzzy
+msgid "carefulputc failed"
+msgstr "carefulputc 失敗"
+
+#: term-utils/write.c:279
+#, fuzzy, c-format
+msgid "Message from %s@%s (as %s) on %s at %02d:%02d ..."
+msgstr "訊息來自 %s@%s (身分為 %s) 於 %s 在 %s …"
+
+#: term-utils/write.c:283
+#, fuzzy, c-format
+msgid "Message from %s@%s on %s at %02d:%02d ..."
+msgstr "訊息來自 %s@%s 於 %s 在 %s …"
+
+#: term-utils/write.c:329
+#, fuzzy
+msgid "you have write permission turned off"
+msgstr "您有寫入權限被關閉"
+
+#: term-utils/write.c:352
+#, fuzzy, c-format
+msgid "%s is not logged in on %s"
+msgstr "%s 未被登入於 %s"
+
+#: term-utils/write.c:358
+#, fuzzy, c-format
+msgid "%s has messages disabled on %s"
+msgstr "%s 有訊息已停用於 %s"
+
+#: text-utils/col.c:135
+#, fuzzy
+msgid "Filter out reverse line feeds.\n"
+msgstr "太多單純換列字元。\n"
+
+#: text-utils/col.c:138
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Options:\n"
+" -b, --no-backspaces do not output backspaces\n"
+" -f, --fine permit forward half line feeds\n"
+" -p, --pass pass unknown control sequences\n"
+" -h, --tabs convert spaces to tabs\n"
+" -x, --spaces convert tabs to spaces\n"
+" -l, --lines NUM buffer at least NUM lines\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -b, --no-backspaces 不輸出退格\n"
+" -f, --fine 允許轉寄半送列\n"
+" -p, --pass 回合不明控制序列\n"
+" -h, --tabs 轉換空格轉為跳格\n"
+" -x, --spaces 轉換跳格轉為空格\n"
+" -l, --lines NUM 緩衝區至少 NUM 列\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -H, --help 顯示這份說明然後離開\n"
+"\n"
+
+#: text-utils/col.c:151 text-utils/colrm.c:69
+#, fuzzy, c-format
+msgid ""
+"%s reads from standard input and writes to standard output\n"
+"\n"
+msgstr ""
+"%s 讀取從標準輸入和寫入標準輸出\n"
+"\n"
+
+#: text-utils/col.c:215
+#, fuzzy
+msgid "bad -l argument"
+msgstr "不當的 -l 引數"
+
+#: text-utils/col.c:246
+#, fuzzy, c-format
+msgid "failed on line %d"
+msgstr "取消連結 %s 時失敗"
+
+#: text-utils/col.c:344
+#, fuzzy, c-format
+msgid "warning: can't back up %s."
+msgstr "警告：無法上一步向上 %s。"
+
+#: text-utils/col.c:345
+msgid "past first line"
+msgstr "略過第一列"
+
+#: text-utils/col.c:345
+msgid "-- line already flushed"
+msgstr "-- 列已經清理"
+
+#: text-utils/colcrt.c:82 text-utils/column.c:626
+#, fuzzy, c-format
+msgid " %s [options] [<file>...]\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: text-utils/colcrt.c:85
+msgid "Filter nroff output for CRT previewing.\n"
+msgstr ""
+
+#: text-utils/colcrt.c:88
+msgid " -, --no-underlining suppress all underlining\n"
+msgstr ""
+
+#: text-utils/colcrt.c:89
+#, fuzzy
+msgid " -2, --half-lines print all half-lines\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: text-utils/colrm.c:60
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Usage:\n"
+" %s [startcol [endcol]]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [startcol [endcol]]\n"
+
+#: text-utils/colrm.c:65
+msgid "Filter out the specified columns.\n"
+msgstr ""
+
+#: text-utils/colrm.c:184
+#, fuzzy
+msgid "first argument"
+msgstr "第一個引數"
+
+#: text-utils/colrm.c:186
+#, fuzzy
+msgid "second argument"
+msgstr "秒引數"
+
+#: text-utils/column.c:235
+#, fuzzy
+msgid "failed to parse column"
+msgstr "剖析結束時失敗"
+
+#: text-utils/column.c:245
+#, fuzzy, c-format
+msgid "undefined column name '%s'"
+msgstr "mountpoint"
+
+#: text-utils/column.c:321
+#, fuzzy
+msgid "failed to parse --table-order list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:397
+#, fuzzy
+msgid "failed to parse --table-right list"
+msgstr "剖析開始時失敗"
+
+#: text-utils/column.c:401
+#, fuzzy
+msgid "failed to parse --table-trunc list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:405
+#, fuzzy
+msgid "failed to parse --table-noextreme list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:409
+#, fuzzy
+msgid "failed to parse --table-wrap list"
+msgstr "剖析開始時失敗"
+
+#: text-utils/column.c:413
+#, fuzzy
+msgid "failed to parse --table-hide list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:444
+#, c-format
+msgid "line %zu: for JSON the name of the column %zu is required"
+msgstr ""
+
+#: text-utils/column.c:458
+#, fuzzy
+msgid "failed to allocate output data"
+msgstr "初始化輸出表格時失敗"
+
+#: text-utils/column.c:629
+msgid "Columnate lists.\n"
+msgstr ""
+
+#: text-utils/column.c:632
+#, fuzzy
+msgid " -t, --table create a table\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: text-utils/column.c:633
+#, fuzzy
+msgid " -n, --table-name <name> table name for JSON output\n"
+msgstr " -n, --name <progname> 名稱之下該項錯誤被報告\n"
+
+#: text-utils/column.c:634
+#, fuzzy
+msgid " -O, --table-order <columns> specify order of output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: text-utils/column.c:635
+#, fuzzy
+msgid " -N, --table-columns <names> comma separated columns names\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: text-utils/column.c:636
+msgid " -E, --table-noextreme <columns> don't count long text from the columns to column width\n"
+msgstr ""
+
+#: text-utils/column.c:637
+#, fuzzy
+msgid " -d, --table-noheadings don't print header\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/column.c:638
+msgid " -e, --table-header-repeat repeat header for each page\n"
+msgstr ""
+
+#: text-utils/column.c:639
+#, fuzzy
+msgid " -H, --table-hide <columns> don't print the columns\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: text-utils/column.c:640
+msgid " -R, --table-right <columns> right align text in these columns\n"
+msgstr ""
+
+#: text-utils/column.c:641
+#, fuzzy
+msgid " -T, --table-truncate <columns> truncate text in the columns when necessary\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: text-utils/column.c:642
+msgid " -W, --table-wrap <columns> wrap text in the columns when necessary\n"
+msgstr ""
+
+#: text-utils/column.c:643
+#, fuzzy
+msgid " -L, --table-empty-lines don't ignore empty lines\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/column.c:644
+#, fuzzy
+msgid " -J, --json use JSON output format for table\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: text-utils/column.c:647
+#, fuzzy
+msgid " -r, --tree <column> column to use tree-like output for the table\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: text-utils/column.c:648
+#, fuzzy
+msgid " -i, --tree-id <column> line ID to specify child-parent relation\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: text-utils/column.c:649
+#, fuzzy
+msgid " -p, --tree-parent <column> parent to specify child-parent relation\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: text-utils/column.c:652
+#, fuzzy
+msgid " -c, --output-width <width> width of output in number of characters\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: text-utils/column.c:653
+msgid " -o, --output-separator <string> columns separator for table output (default is two spaces)\n"
+msgstr ""
+
+#: text-utils/column.c:654
+msgid " -s, --separator <string> possible table delimiters\n"
+msgstr ""
+
+#: text-utils/column.c:655
+#, fuzzy
+msgid " -x, --fillrows fill rows before columns\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: text-utils/column.c:724
+#, fuzzy
+msgid "invalid columns argument"
+msgstr "無效的欄位引數"
+
+#: text-utils/column.c:749
+#, fuzzy
+msgid "failed to parse column names"
+msgstr "剖析掛載表時失敗"
+
+#: text-utils/column.c:804
+msgid "options --tree-id and --tree-parent are required for tree formatting"
+msgstr ""
+
+#: text-utils/column.c:812
+msgid "option --table required for all --table-*"
+msgstr ""
+
+#: text-utils/column.c:815
+msgid "option --table-columns required for --json"
+msgstr ""
+
+#: text-utils/hexdump.c:155 text-utils/more.c:205
+#, fuzzy, c-format
+msgid " %s [options] <file>...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: text-utils/hexdump.c:158
+msgid "Display file contents in hexadecimal, decimal, octal, or ascii.\n"
+msgstr ""
+
+#: text-utils/hexdump.c:161
+msgid " -b, --one-byte-octal one-byte octal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:162
+msgid " -c, --one-byte-char one-byte character display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:163
+msgid " -C, --canonical canonical hex+ASCII display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:164
+msgid " -d, --two-bytes-decimal two-byte decimal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:165
+msgid " -o, --two-bytes-octal two-byte octal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:166
+msgid " -x, --two-bytes-hex two-byte hexadecimal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:167
+msgid " -L, --color[=<mode>] interpret color formatting specifiers\n"
+msgstr ""
+
+#: text-utils/hexdump.c:170
+msgid " -e, --format <format> format string to be used for displaying data\n"
+msgstr ""
+
+#: text-utils/hexdump.c:171
+msgid " -f, --format-file <file> file that contains format strings\n"
+msgstr ""
+
+#: text-utils/hexdump.c:172
+msgid " -n, --length <length> interpret only length bytes of input\n"
+msgstr ""
+
+#: text-utils/hexdump.c:173
+msgid " -s, --skip <offset> skip offset bytes from the beginning\n"
+msgstr ""
+
+#: text-utils/hexdump.c:174
+#, fuzzy
+msgid " -v, --no-squeezing output identical lines\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: text-utils/hexdump-display.c:365
+#, fuzzy
+msgid "all input file arguments failed"
+msgstr "所有輸入檔案引數失敗"
+
+#: text-utils/hexdump-parse.c:55
+#, fuzzy, c-format
+msgid "bad byte count for conversion character %s"
+msgstr "不當的位元組計數用於轉換字元 %s"
+
+#: text-utils/hexdump-parse.c:60
+#, fuzzy, c-format
+msgid "%%s requires a precision or a byte count"
+msgstr "%%s 需要精確度或位元組計數"
+
+#: text-utils/hexdump-parse.c:65
+#, fuzzy, c-format
+msgid "bad format {%s}"
+msgstr "不當的格式 {%s}"
+
+#: text-utils/hexdump-parse.c:70
+#, fuzzy, c-format
+msgid "bad conversion character %%%s"
+msgstr "不當的轉換字元 %%%s"
+
+#: text-utils/hexdump-parse.c:436
+#, fuzzy
+msgid "byte count with multiple conversion characters"
+msgstr "位元組計數與多重轉換字元"
+
+#: text-utils/line.c:34
+msgid "Read one line.\n"
+msgstr ""
+
+#: text-utils/more.c:208
+msgid "A file perusal filter for CRT viewing.\n"
+msgstr ""
+
+#: text-utils/more.c:211
+#, fuzzy
+msgid " -d display help instead of ringing bell\n"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: text-utils/more.c:212
+#, fuzzy
+msgid " -f count logical rather than screen lines\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/more.c:213
+#, fuzzy
+msgid " -l suppress pause after form feed\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: text-utils/more.c:214
+#, fuzzy
+msgid " -c do not scroll, display text and clean line ends\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/more.c:215
+#, fuzzy
+msgid " -p do not scroll, clean screen and display text\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: text-utils/more.c:216
+#, fuzzy
+msgid " -s squeeze multiple blank lines into one\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: text-utils/more.c:217
+msgid " -u suppress underlining\n"
+msgstr ""
+
+#: text-utils/more.c:218
+#, fuzzy
+msgid " -<number> the number of lines per screenful\n"
+msgstr " -number 列各頁面\n"
+
+#: text-utils/more.c:219
+msgid " +<number> display file beginning from line number\n"
+msgstr ""
+
+#: text-utils/more.c:220
+msgid " +/<string> display file beginning from search string match\n"
+msgstr ""
+
+#: text-utils/more.c:282
+#, fuzzy, c-format
+msgid "unknown option -%s"
+msgstr "不明選項 -%s"
+
+#: text-utils/more.c:329
+#, c-format
+msgid ""
+"\n"
+"******** %s: Not a text file ********\n"
+"\n"
+msgstr ""
+"\n"
+"******** %s: 不是文字檔 ********\n"
+"\n"
+
+#: text-utils/more.c:354
+#, c-format
+msgid ""
+"\n"
+"*** %s: directory ***\n"
+"\n"
+msgstr ""
+"\n"
+"*** %s: 目錄 ***\n"
+"\n"
+
+#: text-utils/more.c:702
+#, c-format
+msgid "--More--"
+msgstr "--更多--"
+
+#: text-utils/more.c:704
+#, c-format
+msgid "(Next file: %s)"
+msgstr "(下一個檔案：%s)"
+
+#: text-utils/more.c:712
+#, c-format
+msgid "[Press space to continue, 'q' to quit.]"
+msgstr "[按下空格以繼續，「q」表示離開。]"
+
+#: text-utils/more.c:817
+msgid ""
+"\n"
+"...Skipping "
+msgstr ""
+"\n"
+"...跳過 "
+
+#: text-utils/more.c:821
+msgid "...Skipping to file "
+msgstr "…跳到檔案 "
+
+#: text-utils/more.c:823
+msgid "...Skipping back to file "
+msgstr "…跳回檔案 "
+
+#: text-utils/more.c:992
+msgid "Line too long"
+msgstr "列太長"
+
+#: text-utils/more.c:1028
+msgid "No previous command to substitute for"
+msgstr "沒有前一個命令可用於替代"
+
+#: text-utils/more.c:1068
+#, c-format
+msgid "[Use q or Q to quit]"
+msgstr "[使用 q 或 Q 以離開]"
+
+#: text-utils/more.c:1148
+msgid "exec failed\n"
+msgstr "執行時失敗\n"
+
+#: text-utils/more.c:1163
+msgid "can't fork\n"
+msgstr "無法衍生執行\n"
+
+#: text-utils/more.c:1193
+msgid " Overflow\n"
+msgstr " 溢位\n"
+
+#: text-utils/more.c:1224
+#, c-format
+msgid "\"%s\" line %d"
+msgstr "「%s」第 %d 列"
+
+#: text-utils/more.c:1226
+#, c-format
+msgid "[Not a file] line %d"
+msgstr "[非檔案] 第 %d 列"
+
+#: text-utils/more.c:1338
+msgid "...skipping\n"
+msgstr "…跳過\n"
+
+#: text-utils/more.c:1372
+msgid ""
+"\n"
+"Pattern not found\n"
+msgstr ""
+"\n"
+"找不到相符的式樣\n"
+
+#: text-utils/more.c:1378 text-utils/pg.c:1035 text-utils/pg.c:1181
+msgid "Pattern not found"
+msgstr "找不到相符的式樣"
+
+#: text-utils/more.c:1441
+#, fuzzy, c-format
+msgid "...back %d page"
+msgid_plural "...back %d pages"
+msgstr[0] "…倒退 %d 頁"
+
+#: text-utils/more.c:1495
+#, fuzzy, c-format
+msgid "...skipping %d line"
+msgid_plural "...skipping %d lines"
+msgstr[0] "…跳過 %d 列"
+
+#: text-utils/more.c:1539
+msgid ""
+"\n"
+"***Back***\n"
+"\n"
+msgstr ""
+"\n"
+"***倒退***\n"
+"\n"
+
+#: text-utils/more.c:1556
+#, fuzzy
+msgid "No previous regular expression"
+msgstr "沒有前一個正規表示式"
+
+#: text-utils/more.c:1588
+msgid ""
+"\n"
+"Most commands optionally preceded by integer argument k. Defaults in brackets.\n"
+"Star (*) indicates argument becomes new default.\n"
+msgstr ""
+"\n"
+"大部分命令可選用前導的整數引數 k。預設值位於中括號內。\n"
+"星號 (*) 用來指定引數成為新的預設值。\n"
+
+#: text-utils/more.c:1595
+msgid ""
+"<space> Display next k lines of text [current screen size]\n"
+"z Display next k lines of text [current screen size]*\n"
+"<return> Display next k lines of text [1]*\n"
+"d or ctrl-D Scroll k lines [current scroll size, initially 11]*\n"
+"q or Q or <interrupt> Exit from more\n"
+"s Skip forward k lines of text [1]\n"
+"f Skip forward k screenfuls of text [1]\n"
+"b or ctrl-B Skip backwards k screenfuls of text [1]\n"
+"' Go to place where previous search started\n"
+"= Display current line number\n"
+"/<regular expression> Search for kth occurrence of regular expression [1]\n"
+"n Search for kth occurrence of last r.e [1]\n"
+"!<cmd> or :!<cmd> Execute <cmd> in a subshell\n"
+"v Start up /usr/bin/vi at current line\n"
+"ctrl-L Redraw screen\n"
+":n Go to kth next file [1]\n"
+":p Go to kth previous file [1]\n"
+":f Display current file name and line number\n"
+". Repeat previous command\n"
+msgstr ""
+"<space> 顯示下一組 k 列文字 [目前螢幕大小]\n"
+"z 顯示下一組 k 列文字 [目前螢幕大小]*\n"
+"<return> 顯示下一組 k 列文字 [1]*\n"
+"d 或 ctrl-D 捲動 k 列 [目前捲動大小，初始值 11]*\n"
+"q 或 Q 或 <interrupt> 離開 more\n"
+"s 向前跳過 k 列文字 [1]\n"
+"f 向前跳過 k 全螢幕的文字 [1]\n"
+"b 或 ctrl-B 向後跳過 k 全螢幕的文字 [1]\n"
+"' 前往前一個搜尋開始的位置\n"
+"= 顯示目前列號\n"
+"/<正規表示式> 搜尋第 k 個出現的正規表示式 [1]\n"
+"n 搜尋第 k 個出現的倒數正規表示式 [1]\n"
+"!<cmd> 或 :!<cmd> 在 subshell 中執行 <cmd>\n"
+"v 在當前列上啟動 /usr/bin/vi\n"
+"ctrl-L 重繪螢幕\n"
+":n 前往後面第 k 個檔案 [1]\n"
+":p 前往前面第 k 個檔案 [1]\n"
+":f 顯示目前檔案名稱和列號\n"
+". 重複前一個命令\n"
+
+#: text-utils/more.c:1668 text-utils/more.c:1674
+#, c-format
+msgid "[Press 'h' for instructions.]"
+msgstr "[按下「h」列出指令。]"
+
+#: text-utils/pg.c:152
+#, fuzzy
+msgid ""
+"-------------------------------------------------------\n"
+" h this screen\n"
+" q or Q quit program\n"
+" <newline> next page\n"
+" f skip a page forward\n"
+" d or ^D next halfpage\n"
+" l next line\n"
+" $ last page\n"
+" /regex/ search forward for regex\n"
+" ?regex? or ^regex^ search backward for regex\n"
+" . or ^L redraw screen\n"
+" w or z set page size and go to next page\n"
+" s filename save current file to filename\n"
+" !command shell escape\n"
+" p go to previous file\n"
+" n go to next file\n"
+"\n"
+"Many commands accept preceding numbers, for example:\n"
+"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first page).\n"
+"\n"
+"See pg(1) for more information.\n"
+"-------------------------------------------------------\n"
+msgstr ""
+"-------------------------------------------------------\n"
+" h 這個螢幕\n"
+" q 或 Q 離開程式\n"
+" <newline> 下一頁\n"
+" f 跳過頁面轉寄\n"
+" d 或 ^D 下一個 halfpage\n"
+" l 下一個列\n"
+" $ 最後一頁\n"
+" /regex/ 搜尋轉寄用於 regex\n"
+" ？regex？或 ^ regex ^ 向後搜尋用於 regex\n"
+" .或 ^L 重繪螢幕\n"
+" w 或 z 設定頁面大小並前往下一頁\n"
+" s 檔名 儲存目前的檔案到檔名\n"
+" ！命令 命令殼退出\n"
+" p 前往前一個檔案\n"
+" n 前往下一個檔案\n"
+"\n"
+"許多命令接受前繼數量，舉例來說：\n"
+"+1<新列字元>(下一頁)；-1< 新列字元>(上一頁)；1<新列字元>(第一頁)。\n"
+"\n"
+"參看 pg (1) 以獲得更多資訊。\n"
+"-------------------------------------------------------\n"
+
+#: text-utils/pg.c:231
+#, fuzzy, c-format
+msgid " %s [options] [+line] [+/pattern/] [files]\n"
+msgstr " %s [選項] [+列] [+/胚騰/] [檔案]\n"
+
+#: text-utils/pg.c:235
+msgid "Browse pagewise through text files.\n"
+msgstr ""
+
+#: text-utils/pg.c:238
+#, fuzzy
+msgid " -number lines per page\n"
+msgstr " -number 列各頁面\n"
+
+#: text-utils/pg.c:239
+#, fuzzy
+msgid " -c clear screen before displaying\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: text-utils/pg.c:240
+#, fuzzy
+msgid " -e do not pause at end of a file\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: text-utils/pg.c:241
+#, fuzzy
+msgid " -f do not split long lines\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/pg.c:242
+#, fuzzy
+msgid " -n terminate command with new line\n"
+msgstr " -n 終止命令與換列\n"
+
+#: text-utils/pg.c:243
+#, fuzzy
+msgid " -p <prompt> specify prompt\n"
+msgstr " -p <prompt> 指定提示\n"
+
+#: text-utils/pg.c:244
+#, fuzzy
+msgid " -r disallow shell escape\n"
+msgstr " -r disallow 命令殼退出\n"
+
+#: text-utils/pg.c:245
+#, fuzzy
+msgid " -s print messages to stdout\n"
+msgstr " -s 列印訊息到標準輸出\n"
+
+#: text-utils/pg.c:246
+#, fuzzy
+msgid " +number start at the given line\n"
+msgstr "+數字 開始於給定的列\n"
+
+#: text-utils/pg.c:247
+#, fuzzy
+msgid " +/pattern/ start at the line containing pattern\n"
+msgstr "+/胚騰/ 開始於列包含胚騰\n"
+
+#: text-utils/pg.c:258
+#, fuzzy, c-format
+msgid "option requires an argument -- %s"
+msgstr "%s：選項需要一個引數 -- %s\n"
+
+#: text-utils/pg.c:264
+#, fuzzy, c-format
+msgid "illegal option -- %s"
+msgstr "%s：不合法的選項 -- %s\n"
+
+#: text-utils/pg.c:367
+msgid "...skipping forward\n"
+msgstr "…向前跳過\n"
+
+#: text-utils/pg.c:369
+msgid "...skipping backward\n"
+msgstr "…向後跳過\n"
+
+#: text-utils/pg.c:385
+msgid "No next file"
+msgstr "沒有下個檔案"
+
+#: text-utils/pg.c:389
+msgid "No previous file"
+msgstr "沒有上個檔案"
+
+#: text-utils/pg.c:891
+#, fuzzy, c-format
+msgid "Read error from %s file"
+msgstr "%s：從 %s 檔案讀取時錯誤\n"
+
+#: text-utils/pg.c:894
+#, fuzzy, c-format
+msgid "Unexpected EOF in %s file"
+msgstr "%s：在 %s 檔案中出現未預期的檔案結束\n"
+
+#: text-utils/pg.c:896
+#, fuzzy, c-format
+msgid "Unknown error in %s file"
+msgstr "%s：%s 檔案中發生不明錯誤\n"
+
+#: text-utils/pg.c:949
+#, fuzzy
+msgid "Cannot create temporary file"
+msgstr "%s：無法建立暫存檔\n"
+
+#: text-utils/pg.c:958 text-utils/pg.c:1122 text-utils/pg.c:1148
+msgid "RE error: "
+msgstr "正規表示式錯誤："
+
+#: text-utils/pg.c:1105
+msgid "(EOF)"
+msgstr "(檔案結束)"
+
+#: text-utils/pg.c:1130 text-utils/pg.c:1156
+msgid "No remembered search string"
+msgstr "沒有被記住的搜尋字串"
+
+#: text-utils/pg.c:1211
+#, fuzzy
+msgid "cannot open "
+msgstr "無法開啟 "
+
+#: text-utils/pg.c:1353
+msgid ": !command not allowed in rflag mode.\n"
+msgstr "：!命令在 rflag 模式不允許。\n"
+
+#: text-utils/pg.c:1387
+msgid "fork() failed, try again later\n"
+msgstr "fork() 失敗，稍後再試\n"
+
+#: text-utils/pg.c:1475
+msgid "(Next file: "
+msgstr "(下個檔案："
+
+#: text-utils/pg.c:1541
+#, fuzzy, c-format
+msgid "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"
+msgstr "%s %s 著作權©2000-2001 Gunnar Ritter。版權所有。\n"
+
+#: text-utils/pg.c:1594 text-utils/pg.c:1667
+#, fuzzy
+msgid "failed to parse number of lines per page"
+msgstr "剖析列號的時失敗"
+
+#: text-utils/rev.c:75
+#, fuzzy, c-format
+msgid "Usage: %s [options] [file ...]\n"
+msgstr "用法：%s [選項] [檔案...]\n"
+
+#: text-utils/rev.c:79
+msgid "Reverse lines characterwise.\n"
+msgstr ""
+
+#: text-utils/ul.c:142
+#, fuzzy, c-format
+msgid " %s [options] [<file> ...]\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: text-utils/ul.c:145
+msgid "Do underlining.\n"
+msgstr ""
+
+#: text-utils/ul.c:148
+msgid " -t, -T, --terminal TERMINAL override the TERM environment variable\n"
+msgstr ""
+
+#: text-utils/ul.c:149
+msgid " -i, --indicated underlining is indicated via a separate line\n"
+msgstr ""
+
+#: text-utils/ul.c:209
+msgid "trouble reading terminfo"
+msgstr "讀取 terminfo 時出現問題"
+
+#: text-utils/ul.c:214
+#, fuzzy, c-format
+msgid "terminal `%s' is not known, defaulting to `dumb'"
+msgstr "終端機『%s』不是已知，預設到『dumb』"
+
+#: text-utils/ul.c:304
+#, fuzzy, c-format
+msgid "unknown escape sequence in input: %o, %o"
+msgstr "不明的退出序列在中輸入：%o，%o"
+
+#: text-utils/ul.c:629
+#, fuzzy
+msgid "Input line too long."
+msgstr "輸入列太長。"
+
+#, fuzzy
+#~ msgid "Rufus alignment"
+#~ msgstr "第一個引數"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Do you really want to quit? "
+#~ msgstr "您真的要離開嗎？"
+
+#, fuzzy
+#~ msgid ""
+#~ "usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
+#~ " -v be verbose\n"
+#~ " -E make all warnings errors (non-zero exit status)\n"
+#~ " -b blksize use this blocksize, must equal page size\n"
+#~ " -e edition set edition number (part of fsid)\n"
+#~ " -N endian set cramfs endianness (big|little|host), default host\n"
+#~ " -i file insert a file image into the filesystem\n"
+#~ " -n name set name of cramfs filesystem\n"
+#~ " -p pad by %d bytes for boot code\n"
+#~ " -s sort directory entries (old option, ignored)\n"
+#~ " -z make explicit holes\n"
+#~ " dirname root of the filesystem to be compressed\n"
+#~ " outfile output file\n"
+#~ msgstr ""
+#~ "用法：%s [-h] [-v] [-b 區塊大小] [-e 編次] [-N 尾序] [-i 檔案] [-n 名稱] dirname outfile\n"
+#~ " -h 印出這個說明\n"
+#~ " -v 詳細訊息\n"
+#~ " -E 所有警告視為錯誤 (非零結束狀態)\n"
+#~ " -b 區塊大小 使用這個區塊大小，必須等於頁面大小\n"
+#~ " -e 編次 設定編次數字 (部分的 fsid)\n"
+#~ " -N 尾序 設定 cramfs 尾序 (大|小|主機)，預設依主機\n"
+#~ " -i 檔案 插入檔案影像到檔案系統 (需求 >= 2.4.0)\n"
+#~ " -n 名稱 設定 cramfs 檔案系統的名稱\n"
+#~ " -p 填充 %d 位元組於開機碼\n"
+#~ " -s 排序目錄項目 (舊選項，忽略)\n"
+#~ " -z 製作明確的空洞 (需求 >= 2.3.39)\n"
+#~ " dirname 壓縮的檔案系統根目錄\n"
+#~ " outfile 輸出檔案\n"
+
+#, fuzzy
+#~ msgid "user %s does not exist"
+#~ msgstr "使用者 %s 不存在"
+
+#, fuzzy
+#~ msgid "only root can use \"--%s\" option (effective UID is %u)"
+#~ msgstr "只有根可以使用「--%s」選項 (有效 UID 是 %u)"
+
+#, fuzzy
+#~ msgid "only root can do that (effective UID is %u)"
+#~ msgstr "只有根可以那樣做 (有效 UID 是 %u)"
+
+#, fuzzy
+#~ msgid "only root can use \"--%s\" option"
+#~ msgstr "只有根可以使用「--%s」選項"
+
+#, fuzzy
+#~ msgid "only root can do that"
+#~ msgstr "只有根可以那樣做"
+
+#, fuzzy
+#~ msgid ""
+#~ " -a, --append append the output\n"
+#~ " -c, --command <command> run command rather than interactive shell\n"
+#~ " -e, --return return exit code of the child process\n"
+#~ " -f, --flush run flush after each write\n"
+#~ " --force use output file even when it is a link\n"
+#~ " -o, --output-limit <size> terminate if output files exceed size\n"
+#~ " -q, --quiet be quiet\n"
+#~ " -t[<file>], --timing[=<file>] output timing data to stderr or to FILE\n"
+#~ msgstr ""
+#~ " -a, --append 附加輸出\n"
+#~ " -c, --command <command> 運行命令而非互動式命令殼\n"
+#~ " -e, --return 回傳離開代碼的子行程\n"
+#~ " -f, --flush 運行清理之後每個寫入\n"
+#~ " --force 使用輸出檔案甚至時它是鏈結\n"
+#~ " -q, --quiet 是安靜的\n"
+#~ " -t, --timing [=<檔案>] 輸出時機資料到標準勘誤 (或到檔案)\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "cannot write script file"
+#~ msgstr "無法寫入指令稿檔案"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Session terminated.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "作業階段終止，killing 命令殼…"
+
+#, fuzzy
+#~ msgid "openpty failed"
+#~ msgstr "openpty 失敗"
+
+#, fuzzy
+#~ msgid "out of pty's"
+#~ msgstr "發信匣的 pty's"
+
+#~ msgid "Script started, file is %s\n"
+#~ msgstr "命令稿已啟動，檔案是 %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -t, --timing <file> script timing output file\n"
+#~ " -s, --typescript <file> script terminal session output file\n"
+#~ " -d, --divisor <num> speed up or slow down execution with time divisor\n"
+#~ " -m, --maxdelay <num> wait at most this many seconds between updates\n"
+#~ msgstr ""
+#~ " -t, --timing <file> 指令稿時機輸出檔案\n"
+#~ " -s, --typescript<檔案>指令稿終端機作業階段輸出檔案\n"
+#~ " -d, --divisor<num> 加速或拖慢執行與時間除數\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#~ msgid "write to stdout failed"
+#~ msgstr "寫入標準輸出時失敗"
+
+#~ msgid "unexpected end of file on %s"
+#~ msgstr "未預期的檔案結束於 %s"
+
+#~ msgid "failed to read typescript file %s"
+#~ msgstr "讀取 typescript 檔案 %s 時失敗"
+
+#, fuzzy
+#~ msgid "wrong number of arguments"
+#~ msgstr "錯誤的引數數量"
+
+#~ msgid "failed to read timing file %s"
+#~ msgstr "讀取時序檔案 %s 時失敗"
+
+#, fuzzy
+#~ msgid "timing file %s: line %lu: unexpected format"
+#~ msgstr "時序檔案 %s：%lu：未預期的格式"
+
+#, fuzzy
+#~ msgid "ttyname failed"
+#~ msgstr "ttyname 失敗"
+
+#, fuzzy
+#~ msgid "incorrect password"
+#~ msgstr "不正確密碼"
+
+#~ msgid "Failed to set personality to %s"
+#~ msgstr "設定身分為 %s 時失敗"
+
+#, fuzzy
+#~ msgid "cannot get tty name"
+#~ msgstr "無法提取 tty 名稱"
+
+#, fuzzy
+#~ msgid "%15s: %s"
+#~ msgstr "磁碟：%.*s\n"
+
+#, fuzzy
+#~ msgid "failed to parse CPU list %s"
+#~ msgstr "剖析 CPU 清單 %s 時失敗"
+
+#~ msgid "failed to parse CPU mask %s"
+#~ msgstr "剖析 CPU 遮罩 %s 時失敗"
+
+#, fuzzy
+#~ msgid "%s"
+#~ msgstr "%s"
+
+#, fuzzy
+#~ msgid "%s %04d"
+#~ msgstr "%s %d"
+
+#, fuzzy
+#~ msgid "%s: failed to compose sysfs path"
+#~ msgstr "撰寫 sysfs 路徑用於 %s 時失敗"
+
+#, fuzzy
+#~ msgid "%s: failed to read link"
+#~ msgstr "%s：無法讀取鏈結"
+
+#, fuzzy
+#~ msgid "%s - No such file or directory\n"
+#~ msgstr "%s - 沒有此類檔案或目錄\n"
+
+#, fuzzy
+#~ msgid "%s: %s."
+#~ msgstr "磁碟：%.*s\n"
+
+#~ msgid "Geometry"
+#~ msgstr "結構"
+
+#, fuzzy
+#~ msgid "kind of lock: FL_FLOCK or FL_POSIX."
+#~ msgstr "kind 的鎖定：FL_FLOCK 或 FL_POSIX。"
+
+#, fuzzy
+#~ msgid "unable to exec /bin/umount of `%s'"
+#~ msgstr "無法 exec/bin/umount 的『%s』"
+
+#, fuzzy
+#~ msgid " -D, --debug display more details"
+#~ msgstr " -v, --verbose 列印詳細的資料\n"
+
+#, fuzzy
+#~ msgid "failed to read from: %s"
+#~ msgstr "讀取時失敗：%s"
+
+#, fuzzy
+#~ msgid "cannot execute: %s"
+#~ msgstr "無法寫入 %s"
+
+#, fuzzy
+#~ msgid "unsupported algorithm: %s"
+#~ msgstr "不受支援的引數：%s"
+
+#, fuzzy
+#~ msgid ""
+#~ "Test mode: %s was not updated with:\n"
+#~ "%s"
+#~ msgstr "裝置 %s 未與 %s 有所關聯\n"
+
+#~ msgid "Could not open file with the clock adjustment parameters in it (%s) for writing"
+#~ msgstr "無法以其中的時鐘調整參數 (%s) 開啟檔案用於寫入"
+
+#~ msgid "Could not update file with the clock adjustment parameters (%s) in it"
+#~ msgstr "無法以其中的時鐘調整參數 (%s) 更新檔案"
+
+#, fuzzy
+#~ msgid "Drift adjustment parameters not updated."
+#~ msgstr "漂移調整參數無法更新。"
+
+#, fuzzy
+#~ msgid "Test mode: epoch was not set to %s.\n"
+#~ msgstr "大小的交換區域"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %1$s -V\n"
+#~ " %1$s --report [devices]\n"
+#~ " %1$s [-v|-q] commands devices\n"
+#~ "\n"
+#~ "Available commands:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %1$s -V\n"
+#~ " %1$s --report [裝置]\n"
+#~ " %1$s [-v|-q] 命令裝置\n"
+#~ "\n"
+#~ "可用命令：\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for -o):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --show)：\n"
+
+#, fuzzy
+#~ msgid "seek error on %s"
+#~ msgstr "尋指錯誤於 %s"
+
+#, fuzzy
+#~ msgid ""
+#~ " -V, --version display version information and exit;\n"
+#~ " -V as --version must be the only option\n"
+#~ msgstr ""
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid " -h, --help display this help text and exit\n"
+#~ msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for --show, --raw or --pairs):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --show，--raw 或 --pairs)：\n"
+
+#, fuzzy
+#~ msgid " -v, --version output version information and exit\n"
+#~ msgstr " -v, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "Try '%s -h' for more information.\n"
+#~ msgstr "嘗試『%s --help』以獲得更多資訊。\n"
+
+#, fuzzy
+#~ msgid " -h, --help display this help and exit\n"
+#~ msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid " -V, --version output version information and exit\n"
+#~ msgstr " -V, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid " -u, --help display this help and exit\n"
+#~ msgstr " -u, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid "No known shells."
+#~ msgstr "沒有已知命令殼。"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位：\n"
+
+#, fuzzy
+#~ msgid " %s [options] -u <user> [[--] <command>]\n"
+#~ msgstr " %s [選項] <user> [<ttyname>]\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for --output):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --output)：\n"
+
+#, fuzzy
+#~ msgid "Try `%s --help' for more information.\n"
+#~ msgstr "嘗試『%s --help』以獲得更多資訊。\n"
+
+#, fuzzy
+#~ msgid " -v, --verbose explain what is being done\n"
+#~ msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -r, --random generate random-based uuid\n"
+#~ " -t, --time generate time-based uuid\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -r, --random 產生 random-based uuid\n"
+#~ " -t, --time 產生 time-based uuid\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -a, --all wipe all magic strings (BE CAREFUL!)\n"
+#~ " -b, --backup create a signature backup in $HOME\n"
+#~ " -f, --force force erasure\n"
+#~ " -h, --help show this help text\n"
+#~ " -n, --no-act do everything except the actual write() call\n"
+#~ " -o, --offset <num> offset to erase, in bytes\n"
+#~ " -p, --parsable print out in parsable instead of printable format\n"
+#~ " -q, --quiet suppress output messages\n"
+#~ " -t, --types <list> limit the set of filesystem, RAIDs or partition tables\n"
+#~ " -V, --version output version information and exit\n"
+#~ msgstr ""
+#~ " -a, --all 撥所有魔術字串 (請小心 !)\n"
+#~ " -h, --help 顯示這份說明文字\n"
+#~ " -n, --no-act 做所有東西除了實際的寫入() 呼叫\n"
+#~ " -o, --offset <num> 偏移到清除，在中位元組\n"
+#~ " -p, --parsable 印出在中 parsable 以代替可列印格式\n"
+#~ " -q, --quiet 抑制輸出訊息\n"
+#~ " -t, --types<清單> 限制集合檔案系統，RAIDs 或分割表\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095)."
+#~ msgstr "硬體鐘訊暫存器包含值所還是無效的(例如：50 th 月中某日) 或位於之後範圍我們可以控柄(例如：年 2095)。"
+
+#, fuzzy
+#~ msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it."
+#~ msgstr "硬體時鐘不包含有效時間，因而我們無法設定系統時間從它。"
+
+#~ msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
+#~ msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
+
+#~ msgid "\ttz.tz_minuteswest = %d\n"
+#~ msgstr "\ttz.tz_minuteswest = %d\n"
+
+#, fuzzy
+#~ msgid "Must be superuser to set system clock."
+#~ msgstr "必須是系統管理者到設定系統時鐘。"
+
+#~ msgid "\tUTC: %s\n"
+#~ msgstr "\tUTC：%s\n"
+
+#~ msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n"
+#~ msgstr "無法調整偏差係數，因為之前的硬體時鐘包含了無用資料。\n"
+
+#, fuzzy
+#~ msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it."
+#~ msgstr "硬體時鐘不包含有效時間，因而我們無法調整它。"
+
+#~ msgid "At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
+#~ msgstr "1969 年之後 %ld 秒, RTC 預計會讀取 1969 之後 %ld 秒。\n"
+
+#, fuzzy
+#~ msgid "Unable to get the epoch value from the kernel."
+#~ msgstr "無法提取時期值從內核。"
+
+#~ msgid "Kernel is assuming an epoch value of %lu\n"
+#~ msgstr "內核假設時期值為 %lu\n"
+
+#, fuzzy
+#~ msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it."
+#~ msgstr "要設定時期值，您必須使用『時期』選項到告訴到什麼值到設定它。"
+
+#, fuzzy
+#~ msgid "Not setting the epoch to %lu - testing only.\n"
+#~ msgstr "不將時期設定為 %d - 只限於測試。\n"
+
+#~ msgid "Unable to set the epoch value in the kernel.\n"
+#~ msgstr "無法在內核中設定時期值。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -h, --help show this help text and exit\n"
+#~ " -r, --show read hardware clock and print result\n"
+#~ " --get read hardware clock and print drift corrected result\n"
+#~ " --set set the RTC to the time given with --date\n"
+#~ msgstr ""
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ " -r, --show 讀取硬體時鐘和列印結果\n"
+#~ " --set 設定 RTC 到時間給定的與 --date\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -s, --hctosys set the system time from the hardware clock\n"
+#~ " -w, --systohc set the hardware clock from the current system time\n"
+#~ " --systz set the system time based on the current timezone\n"
+#~ " --adjust adjust the RTC to account for systematic drift since\n"
+#~ " the clock was last set or adjusted\n"
+#~ msgstr ""
+#~ " -s, --hctosys 設定系統時間從硬體時鐘\n"
+#~ " -w, --systohc 設定硬體時鐘從目前的系統時間\n"
+#~ " --systz 設定系統時間基於目前的時區\n"
+#~ " --adjust 調整 RTC 到帳號用於 systematic 漂移自從\n"
+#~ " 時鐘是最後一筆設定或調整\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --getepoch print out the kernel's hardware clock epoch value\n"
+#~ " --setepoch set the kernel's hardware clock epoch value to the \n"
+#~ " value given with --epoch\n"
+#~ msgstr ""
+#~ " --getepoch 印出內核『s 硬體時鐘時期值\n"
+#~ " --setepoch 設定內核』s 硬體時鐘時期值到\n"
+#~ " 值給定的與 --epoch\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --predict predict RTC reading at time given with --date\n"
+#~ " -V, --version display version information and exit\n"
+#~ msgstr ""
+#~ " --predict 預測 RTC 讀取於時間給定的與 --date\n"
+#~ " -V, --version 顯示版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -u, --utc the hardware clock is kept in UTC\n"
+#~ " --localtime the hardware clock is kept in local time\n"
+#~ msgstr ""
+#~ " -u, --utc 硬體時鐘被保持在中 UTC\n"
+#~ " --localtime 硬體時鐘被保持在中本地時間\n"
+
+#, fuzzy
+#~ msgid " -f, --rtc <file> special /dev/... file to use instead of default\n"
+#~ msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --update-drift update drift factor in %1$s (requires\n"
+#~ " --set or --systohc)\n"
+#~ " --noadjfile do not access %1$s; this requires the use of\n"
+#~ " either --utc or --localtime\n"
+#~ " --adjfile <file> specifies the path to the adjust file;\n"
+#~ " the default is %1$s\n"
+#~ msgstr ""
+#~ " --noadjfile 不存取 %s；這個需求使用的\n"
+#~ " 還是 --utc 或 --localtime\n"
+#~ " --adjfile <file> 指定路徑到調整檔案；\n"
+#~ " 預設是 %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --test do not update anything, just show what would happen\n"
+#~ " -D, --debug debugging mode\n"
+#~ "\n"
+#~ msgstr ""
+#~ " --test 不更新任何事，僅顯示什麼會發生\n"
+#~ " -D, --debug 偵錯模式\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "invalid epoch argument"
+#~ msgstr "無效的時期引數"
+
+#~ msgid "%s does not have interrupt functions. "
+#~ msgstr "%s 沒有插斷函式。"
+
+#~ msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
+#~ msgstr "%s 的 ioctl() 打開更新插斷意外地失敗"
+
+#, fuzzy
+#~ msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file. This file does not exist on this system."
+#~ msgstr "要操控時期值在中內核，我們必須存取 Linux『rtc』裝置驅動程式透過裝置特殊檔案 %s。 這個檔案不存在於這個系統。"
+
+#, fuzzy
+#~ msgid "we have read epoch %lu from %s with RTC_EPOCH_READ ioctl.\n"
+#~ msgstr "我們已從具備 RTC_EPOCH_READ ioctl 的 %2$s 讀取了時期 %1$ld。\n"
+
+#, fuzzy
+#~ msgid "The epoch value may not be less than 1900. You requested %ld"
+#~ msgstr "時期值可能無法是少於 1900. 您要求的 %ld"
+
+#, fuzzy
+#~ msgid "setting epoch to %lu with RTC_EPOCH_SET ioctl to %s.\n"
+#~ msgstr "設定 epoch 到 %ld 以及 RTC_EPOCH_SET ioctl 到 %s。\n"
+
+#, fuzzy
+#~ msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
+#~ msgstr "內核裝置驅動程式用於 %s 沒有 RTC_EPOCH_SET ioctl。"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s\n"
+#~ "Try `%s --help' for more information."
+#~ msgstr ""
+#~ "%s\n"
+#~ "嘗試『%s --help』以獲得更多資訊。"
+
+#, fuzzy
+#~ msgid "Try `%s --help' for more information."
+#~ msgstr "嘗試『%s --help』以獲得更多資訊。"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for --show):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --show)：\n"
+
+#, fuzzy
+#~ msgid " -T, --trust-irq <on|off> make driver to trust irq\n"
+#~ msgstr " -T, --trust-irq <on|off> 製作驅動程式到信賴 irq\n"
+
+#, fuzzy
+#~ msgid " --version output version information and exit\n"
+#~ msgstr " -V 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid " --version show version information and exit\n"
+#~ msgstr " -V 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid " --help display this help and exit\n"
+#~ msgstr " -h 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid "failed to add data to output table"
+#~ msgstr "加入輸出列時失敗"
+
+#, fuzzy
+#~ msgid "failed to initialize output line"
+#~ msgstr "初始化輸出表格時失敗"
+
+#, fuzzy
+#~ msgid "%s: these options are mutually exclusive:"
+#~ msgstr "--nr 和 <partition> 彼此互斥"
+
+#, fuzzy
+#~ msgid " -m, --mtab search in table of mounted filesystems\n"
+#~ msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#~ msgid "Clock not changed - testing only.\n"
+#~ msgstr "時鐘未變更 - 只做為測試。\n"
+
+#, fuzzy
+#~ msgid "No --date option specified."
+#~ msgstr "沒有 --date 選項指定的。"
+
+#, fuzzy
+#~ msgid "--date argument too long"
+#~ msgstr "--date 引數太長"
+
+#, fuzzy
+#~ msgid ""
+#~ "The value of the --date option is not a valid date.\n"
+#~ "In particular, it contains quotation marks."
+#~ msgstr ""
+#~ "值的 --date 選項並非有效日期。\n"
+#~ "尤其，它含有引號。"
+
+#~ msgid "Issuing date command: %s\n"
+#~ msgstr "執行日期命令：%s\n"
+
+#~ msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
+#~ msgstr "無法在 /bin/sh 命令殼中運行「date」程式。popen() 失敗"
+
+#~ msgid "response from date command = %s\n"
+#~ msgstr "日期命令的回應 = %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "The date command issued by %s returned unexpected results.\n"
+#~ "The command was:\n"
+#~ " %s\n"
+#~ "The response was:\n"
+#~ " %s"
+#~ msgstr ""
+#~ "日期命令議題的由 %s 回傳的未預期的結果。\n"
+#~ "命令是：\n"
+#~ " %s\n"
+#~ "回應是：\n"
+#~ " %s"
+
+#~ msgid ""
+#~ "The date command issued by %s returned something other than an integer where the converted time value was expected.\n"
+#~ "The command was:\n"
+#~ " %s\n"
+#~ "The response was:\n"
+#~ " %s\n"
+#~ msgstr ""
+#~ "由 %s 所執行的日期命令回傳了一些非整數的東西，而非預期己轉換的時間值。\n"
+#~ "命令是：\n"
+#~ " %s\n"
+#~ "回應是：\n"
+#~ "%s\n"
+
+#~ msgid "date string %s equates to %ld seconds since 1969.\n"
+#~ msgstr "日期字串 %s 表示自 1969 年以來己過 %ld 秒。\n"
+
+#~ msgid "Not setting system clock because running in test mode.\n"
+#~ msgstr "未設定系統時鐘，因為在測試模式中執行。\n"
+
+#~ msgid "Not updating adjtime file because of testing mode.\n"
+#~ msgstr "無法更新 adjtime 檔案，因為處於測試模式。\n"
+
+#~ msgid ""
+#~ "Would have written the following to %s:\n"
+#~ "%s"
+#~ msgstr ""
+#~ "將會寫入下列資料到 %s:\n"
+#~ "%s"
+
+#, fuzzy
+#~ msgid ""
+#~ "The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n"
+#~ "This copy of hwclock was built for a machine other than Alpha\n"
+#~ "(and thus is presumably not running on an Alpha now). No action taken."
+#~ msgstr ""
+#~ "內核保持時期值用於硬體時鐘只有於 Alpha 機器。\n"
+#~ "這個複製的 hwclock 是 built 用於機器不同於 Alpha\n"
+#~ "(和因而是據推測無法執行中於 Alpha 現在)。 未採取任何行動。"
+
+#, fuzzy
+#~ msgid ""
+#~ " --directisa access the ISA bus directly instead of %s\n"
+#~ " --badyear ignore RTC's year because the BIOS is broken\n"
+#~ " --date <time> specifies the time to which to set the hardware clock\n"
+#~ " --epoch <year> specifies the year which is the beginning of the\n"
+#~ " hardware clock's epoch value\n"
+#~ msgstr ""
+#~ " --directisa 存取 ISA 匯流排直接以代替 %s\n"
+#~ " --badyear 忽略 RTC's 年因為 BIOS 被不完整的\n"
+#~ " --date <time> 指定時間到該項到設定硬體時鐘\n"
+#~ " --epoch<年> 指定年該項是起始部分的\n"
+#~ " 硬體時鐘時期值\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
+#~ " tell hwclock the type of Alpha you have (see hwclock(8))\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -J|--jensen，-A|--arc，-S|--srm，-F|--funky-toy\n"
+#~ " 告訴 hwclock 型態的 Alpha 您有 (參看 hwclock (8))\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "Sorry, only the superuser can use the Hardware Clock."
+#~ msgstr "抱歉，只有系統管理者可以變更硬體時鐘。"
+
+#~ msgid "%s takes no non-option arguments. You supplied %d.\n"
+#~ msgstr "%s 無需非選項引數。 您卻已給定 %d。\n"
+
+#, fuzzy
+#~ msgid "No usable set-to time. Cannot set clock."
+#~ msgstr "沒有可用 set-to 時間。 無法設定時鐘。"
+
+#~ msgid "booted from MILO\n"
+#~ msgstr "從 MILO 開機\n"
+
+#~ msgid "Ruffian BCD clock\n"
+#~ msgstr "Ruffian BCD 時鐘\n"
+
+#~ msgid "clockport adjusted to 0x%x\n"
+#~ msgstr "時鐘通訊埠調整到 0x%x\n"
+
+#~ msgid "funky TOY!\n"
+#~ msgstr "畏縮的玩具！\n"
+
+#, fuzzy
+#~ msgid "atomic %s failed for 1000 iterations!"
+#~ msgstr "基元的 %s 失敗的用於 1000 反覆運算！"
+
+#, fuzzy
+#~ msgid "cmos_read(): write to control address %X failed"
+#~ msgstr "cmosread()(_R)：寫入控制位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "cmos_read(): read from data address %X failed"
+#~ msgstr "cmosread()(_R)：讀取資料位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "cmos_write(): write to control address %X failed"
+#~ msgstr "cmoswrite()(_W)：寫入控制位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "cmos_write(): write to data address %X failed"
+#~ msgstr "cmoswrite()(_W)：寫入資料位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "I failed to get permission because I didn't try."
+#~ msgstr "我無法提取權限因為我並未嘗試。"
+
+#, fuzzy
+#~ msgid "unable to get I/O port access: the iopl(3) call failed."
+#~ msgstr "無法提取 I/O 通訊埠存取： iopl (3) 呼叫失敗。"
+
+#~ msgid "Probably you need root privileges.\n"
+#~ msgstr "您大概需要系統管理者權限。\n"
+
+#, fuzzy
+#~ msgid "error: can not set signal handler"
+#~ msgstr "無法設定信號處理程式"
+
+#, fuzzy
+#~ msgid "error: can not restore signal handler"
+#~ msgstr "無法設定信號處理程式"
+
+#, fuzzy
+#~ msgid "only root can mount %s on %s"
+#~ msgstr "只有根可以掛載 %s 於 %s"
+
+#, fuzzy
+#~ msgid "%s is used as read only loop, mounting read-only"
+#~ msgstr "%s 被防止寫入的，掛載唯讀"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: more filesystems detected. This should not happen,\n"
+#~ " use -t <type> to explicitly specify the filesystem type or\n"
+#~ " use wipefs(8) to clean up the device."
+#~ msgstr ""
+#~ "掛載：%s：偵測到多個檔案系統。這不應發生，\n"
+#~ " 使用 -t <type> 以明確指定檔案系統型態或\n"
+#~ " 使用 wipefs(8) 以清理裝置。\n"
+
+#, fuzzy
+#~ msgid "I could not determine the filesystem type, and none was specified"
+#~ msgstr "我無法決定檔案系統型態，而無被指定的"
+
+#, fuzzy
+#~ msgid "you must specify the filesystem type"
+#~ msgstr "您必須指定檔案系統型態"
+
+#, fuzzy
+#~ msgid "mount source not defined"
+#~ msgstr "掛載來源無法定義"
+
+#, fuzzy
+#~ msgid "%s: mount failed"
+#~ msgstr "%s：掛載失敗"
+
+#, fuzzy
+#~ msgid "%s: filesystem mounted, but mount(8) failed"
+#~ msgstr "%s：檔案系統掛載，但是掛載 (8) 失敗"
+
+#, fuzzy
+#~ msgid " %s is already mounted on %s\n"
+#~ msgstr " %s 已經掛載的於 %s\n"
+
+#, fuzzy
+#~ msgid "%s not mounted or bad option"
+#~ msgstr "%s 無法掛載的或不當的選項"
+
+#, fuzzy
+#~ msgid ""
+#~ " (for several filesystems (e.g. nfs, cifs) you might\n"
+#~ " need a /sbin/mount.<type> helper program)\n"
+#~ msgstr ""
+#~ " (用於多個檔案系統(例如：nfs，cifs) 您也許\n"
+#~ " 需要/sbin/掛載。<type> 輔助程式程式)\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ " In some cases useful info is found in syslog - try\n"
+#~ " dmesg | tail or so.\n"
+#~ msgstr ""
+#~ " 在某些情況下有用資訊是找到在中 syslog - 嘗試\n"
+#~ " dmesg|尾端之類\n"
+
+#, fuzzy
+#~ msgid "unrecognized option '%c'"
+#~ msgstr "無法辨識的輸入：%s"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: target is busy\n"
+#~ " (In some cases useful info about processes that\n"
+#~ " use the device is found by lsof(8) or fuser(1).)"
+#~ msgstr ""
+#~ "%s：目標忙碌中。\n"
+#~ " (在某些情況下有用資訊關於行程該使用\n"
+#~ " 裝置是找到由 lsof (8) 或 fuser (1))"
+
+#, fuzzy
+#~ msgid "%s: mountpoint not found"
+#~ msgstr "%s：找不到"
+
+#, fuzzy
+#~ msgid "line %d is too long, output will be truncated"
+#~ msgstr "列 %d 太長，輸出將被截斷"
+
+#~ msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
+#~ msgstr "寫入「%s」不完整 (已寫入 %zd，預期則為 %zd)\n"
+
+#~ msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
+#~ msgstr "%s：無法加入 inotify 監看 (已達到 inotify 的監看限制)。"
+
+#, fuzzy
+#~ msgid " %s [option] <file>\n"
+#~ msgstr " %s [選項] [<file>]\n"
+
+#, fuzzy
+#~ msgid " -<number> same as '-n <number>'\n"
+#~ msgstr " -v, --verbose 是更多詳細的\n"
+
+#, fuzzy
+#~ msgid "failed to initialize seccomp context"
+#~ msgstr "初始化 loopcxt 時失敗"
+
+#, fuzzy
+#~ msgid "failed to load seccomp rule"
+#~ msgstr "讀取速度時失敗"
+
+#, fuzzy
+#~ msgid "Filesystem label:"
+#~ msgstr "檔案系統標貼"
+
+#, fuzzy
+#~ msgid "failed to set PATH"
+#~ msgstr "設定路徑時失敗"
+
+#~ msgid "expected a number, but got '%s'"
+#~ msgstr "預期一個數字，但是卻得到「%s」"
+
+#~ msgid "divisor '%s'"
+#~ msgstr "除數「%s」"
+
+#, fuzzy
+#~ msgid "argument error: %s"
+#~ msgstr "引數錯誤。"
+
+#, fuzzy
+#~ msgid "tty path %s too long"
+#~ msgstr "tty 路徑 %s 太長"
+
+#~ msgid "bad timeout value: %s"
+#~ msgstr "不當的逾時設定值：%s"
+
+#, fuzzy
+#~ msgid "%s: parse error at line %d"
+#~ msgstr "%s：剖析錯誤於列 %d"
+
+#, fuzzy
+#~ msgid "%s: parse error: ignore entry at line %d."
+#~ msgstr "%s：剖析錯誤：忽略條目於列 %d。"
+
+#, fuzzy
+#~ msgid "cannot not setup timer"
+#~ msgstr "無法設定群組識別號"
+
+#~ msgid "different"
+#~ msgstr "不同"
+
+#~ msgid "same"
+#~ msgstr "相同"
+
+#~ msgid "%s is not a block special device"
+#~ msgstr "%s 並非區塊特殊裝置"
+
+#, fuzzy
+#~ msgid "%s: device is misaligned"
+#~ msgstr "%s：裝置被 misaligned"
+
+#~ msgid "OS/2 hidden C: drive"
+#~ msgstr "OS/2 隱藏 C: 磁碟"
+
+#, fuzzy
+#~ msgid "%s: failed to get device path"
+#~ msgstr "%s：無法提取裝置路徑"
+
+#, fuzzy
+#~ msgid "%s: unknown device name"
+#~ msgstr "%s：不明裝置名稱"
+
+#, fuzzy
+#~ msgid "%s: failed to get dm name"
+#~ msgstr "%s：無法提取 dm 名稱"
+
+#, fuzzy
+#~ msgid ""
+#~ " -p, --pid <path> path to pid file\n"
+#~ " -s, --socket <path> path to socket\n"
+#~ " -T, --timeout <sec> specify inactivity timeout\n"
+#~ " -k, --kill kill running daemon\n"
+#~ " -r, --random test random-based generation\n"
+#~ " -t, --time test time-based generation\n"
+#~ " -n, --uuids <num> request number of uuids\n"
+#~ " -P, --no-pid do not create pid file\n"
+#~ " -F, --no-fork do not daemonize using double-fork\n"
+#~ " -S, --socket-activation do not create listening socket\n"
+#~ " -d, --debug run in debugging mode\n"
+#~ " -q, --quiet turn on quiet mode\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -p, --pid <path> 路徑到 pid 檔案\n"
+#~ " -s, --socket<路徑> 路徑到通訊端\n"
+#~ " -T, --timeout<sec> 指定不作用逾時\n"
+#~ " -k, --kill 砍除執行中守護程式\n"
+#~ " -r, --random 測試 random-based 產生\n"
+#~ " -t, --time 測試 time-based 產生\n"
+#~ " -n, --uuids<num> 要求 uuids 數量\n"
+#~ " -P, --no-pid 不建立 pid 檔案\n"
+#~ " -F, --no-fork 不 daemonize 使用 double-fork\n"
+#~ " -S, --socket-activation 不建立傾聽通訊端\n"
+#~ " -d, --debug 運行在中偵錯模式\n"
+#~ " -q, --quiet 打開無訊息模式\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "unknown scheduling policy"
+#~ msgstr "不明排程策略"
+
+#, fuzzy
+#~ msgid ""
+#~ " -o, --offset <num> offset in bytes to discard from\n"
+#~ " -l, --length <num> length of bytes to discard from the offset\n"
+#~ " -p, --step <num> size of the discard iterations within the offset\n"
+#~ " -s, --secure perform secure discard\n"
+#~ " -v, --verbose print aligned length and offset\n"
+#~ msgstr ""
+#~ " -o, --offset <num> 偏移在中位元組到捨棄從\n"
+#~ " -l, --length<num> 長度的位元組到捨棄從偏移\n"
+#~ " -m, --minimum<num>最小延伸長度到捨棄\n"
+#~ " -v, --verbose 列印捨棄的位元組數量\n"
+
+#, fuzzy
+#~ msgid "pages"
+#~ msgstr "頁面"
+
+#, fuzzy
+#~ msgid ""
+#~ "Very long (%zu bytes) filename `%s' found.\n"
+#~ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting."
+#~ msgstr ""
+#~ "很長 (%zu 位元組) 檔名『%s』找到。\n"
+#~ " 請增加 MAX_INPUT_NAMELEN 在中 mkcramfs.c 和重新編譯。 離開。"
+
+#, fuzzy
+#~ msgid "%s: unable to allocate buffer for superblock"
+#~ msgstr "%s：無法 alloc 緩衝區用於超區塊"
+
+#, fuzzy
+#~ msgid "%s: unable to allocate buffers for maps"
+#~ msgstr "%s：無法配置緩衝區用於映射"
+
+#, fuzzy
+#~ msgid "%s: unable to allocate buffer for inodes"
+#~ msgstr "%s：無法配置緩衝區用於 inodes"
+
+#, fuzzy
+#~ msgid ""
+#~ " -J, --json use JSON output format\n"
+#~ " -p, --pid <pid> process id\n"
+#~ " -o, --output <list> define which output columns to use\n"
+#~ " -n, --noheadings don't print headings\n"
+#~ " -r, --raw use the raw output format\n"
+#~ " -u, --notruncate don't truncate text in columns\n"
+#~ " -h, --help display this help and exit\n"
+#~ " -V, --version output version information and exit\n"
+#~ msgstr ""
+#~ " -p, --pid <pid> 處理識別號\n"
+#~ " -o, --output<清單> 定義該項輸出欄位以使用\n"
+#~ " -n, --noheadings 不列印標頭\n"
+#~ " -r --raw 使用原始輸出格式\n"
+#~ " -u, --notruncate 不截斷文字在中欄位\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "Number of Semaphore IDs"
+#~ msgstr "磁區數量"
+
+#, fuzzy
+#~ msgid ""
+#~ " -h, --help display this help text and exit\n"
+#~ " -i, --internal-only don't call the mount.<type> helpers\n"
+#~ " -l, --show-labels lists all mounts with LABELs\n"
+#~ " -n, --no-mtab don't write to /etc/mtab\n"
+#~ msgstr ""
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ " -i, --internal-only 不呼叫掛載。<type> 輔助程式\n"
+#~ " -l, --show-labels 列出所有掛載與標貼\n"
+#~ " -n, --no-mtab 不寫入/etc/mtab\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -v, --verbose say what is being done\n"
+#~ " -V, --version display version information and exit\n"
+#~ " -w, --rw, --read-write mount the filesystem read-write (default)\n"
+#~ msgstr ""
+#~ " -v, --verbose 表示什麼正在是已完成\n"
+#~ " -V, --version 顯示版本資訊然後離開\n"
+#~ " -w, --read-write 掛載檔案系統可讀可寫 (預設)\n"
+
+#, fuzzy
+#~ msgid " -v be verbose\n"
+#~ msgstr " -v 是詳細的\n"
+
+#, fuzzy
+#~ msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
+#~ msgstr "用法：%s [-c|-l 檔名] [-nXX] [-iXX]/dev/名稱 [區塊]"
+
+#, fuzzy
+#~ msgid "%s: bad inode size"
+#~ msgstr "%s：不當的 inode 大小"
+
+#, fuzzy
+#~ msgid "disk: %.*s"
+#~ msgstr "磁碟：%.*s\n"
+
+#, fuzzy
+#~ msgid "label: %.*s"
+#~ msgstr "標籤：%.*s\n"
+
+#, fuzzy
+#~ msgid "flags: %s"
+#~ msgstr "旗標："
+
+#, fuzzy
+#~ msgid "bytes/sector: %ld"
+#~ msgstr "位元組/磁區：%ld\n"
+
+#, fuzzy
+#~ msgid "sectors/track: %ld"
+#~ msgstr "磁區/磁軌：%ld\n"
+
+#, fuzzy
+#~ msgid "tracks/cylinder: %ld"
+#~ msgstr "磁軌/磁柱：%ld\n"
+
+#, fuzzy
+#~ msgid "sectors/cylinder: %ld"
+#~ msgstr "磁區/磁柱：%ld\n"
+
+#, fuzzy
+#~ msgid "cylinders: %ld"
+#~ msgstr "磁柱：%ld\n"
+
+#, fuzzy
+#~ msgid "rpm: %d"
+#~ msgstr "rpm：%d\n"
+
+#, fuzzy
+#~ msgid "interleave: %d"
+#~ msgstr "交錯：%d\n"
+
+#, fuzzy
+#~ msgid "trackskew: %d"
+#~ msgstr "trackskew：%d\n"
+
+#, fuzzy
+#~ msgid "cylinderskew: %d"
+#~ msgstr "cylinderskew：%d\n"
+
+#, fuzzy
+#~ msgid "headswitch: %ld (milliseconds)"
+#~ msgstr "headswitch：%ld\t\t# 毫秒\n"
+
+#, fuzzy
+#~ msgid "track-to-track seek: %ld (milliseconds)"
+#~ msgstr "軌對軌搜尋：%ld\t# 毫秒\n"
+
+#, fuzzy
+#~ msgid "You cannot change a partition into an extended one or vice versa. Delete it first."
+#~ msgstr ""
+#~ "您無法變更分割區為一個擴充分割或反之\n"
+#~ "請先刪除它。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Label geometry: %d heads, %llu sectors\n"
+#~ " %llu cylinders, %d physical cylinders\n"
+#~ " %d extra sects/cyl, interleave %d:1\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (SGI 磁碟標貼)：%d 前端，%llu 磁區\n"
+#~ "%llu 磁柱，%d 實體磁柱\n"
+#~ "%d 額外 sects/cyl，交插 %d:1\n"
+#~ "%s\n"
+#~ "單位=%s 的 %d * %ld 位元組\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "<none>"
+#~ msgstr "無"
+
+#~ msgid "gettimeofday failed"
+#~ msgstr "gettimeofday 失敗"
+
+#, fuzzy
+#~ msgid "sysinfo failed"
+#~ msgstr "sysinfo 失敗"
+
+#~ msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
+#~ msgstr "用法：last [-#] [-f file] [-t tty] [-h hostname] [user…]\n"
+
+#, fuzzy
+#~ msgid "%s: mmap failed"
+#~ msgstr "%s：mmap 失敗"
+
+#~ msgid " still logged in"
+#~ msgstr " 仍然在登入狀態"
+
+#~ msgid ""
+#~ "\n"
+#~ "wtmp begins %s"
+#~ msgstr ""
+#~ "\n"
+#~ "wtmp 開始 %s"
+
+#, fuzzy
+#~ msgid "gethostname failed"
+#~ msgstr "gethostname 失敗"
+
+#~ msgid ""
+#~ "\n"
+#~ "interrupted %10.10s %5.5s \n"
+#~ msgstr ""
+#~ "\n"
+#~ "發生插斷 %10.10s %5.5s\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Scheduling policies:\n"
+#~ " -b | --batch set policy to SCHED_BATCH\n"
+#~ " -f | --fifo set policy to SCHED_FIFO\n"
+#~ " -i | --idle set policy to SCHED_IDLE\n"
+#~ " -o | --other set policy to SCHED_OTHER\n"
+#~ " -r | --rr set policy to SCHED_RR (default)\n"
+#~ msgstr ""
+#~ "\n"
+#~ "排程策略：\n"
+#~ " -b | --batch 設定策略為 SCHED_BATCH\n"
+#~ " -f | --fifo 設定策略為 SCHED_FIFO\n"
+#~ " -i | --idle 設定策略為 SCHED_IDLE\n"
+#~ " -o | --other 設定策略為 SCHED_OTHER\n"
+#~ " -r | --rr 設定策略為 SCHED_RR (預設)\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -a | --all-tasks operate on all the tasks (threads) for a given pid\n"
+#~ " -h | --help display this help\n"
+#~ " -m | --max show min and max valid priorities\n"
+#~ " -p | --pid operate on existing given pid\n"
+#~ " -v | --verbose display status information\n"
+#~ " -V | --version output version information\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -a|--all-tasks 作用於所有事務 (執行緒) 用於給定的 pid\n"
+#~ " -h|--help 顯示這份說明\n"
+#~ " -m|--max 顯示最小和最大有效優先等級\n"
+#~ " -p|--pid 作用於現有給定的 pid\n"
+#~ " -v|--verbose 顯示狀態資訊\n"
+#~ " -V|--version 輸出版本資訊\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "invalid argument to --auto/-a option"
+#~ msgstr "無效的引數到 --auto /-a 選項"
+
+#, fuzzy
+#~ msgid "invalid argument to --manualeject/-i option"
+#~ msgstr "無效的引數到 --manualeject /-i 選項"
+
+#, fuzzy
+#~ msgid "Sorry, only the superuser can change the System Clock."
+#~ msgstr "抱歉，只有系統管理者可以變更系統時鐘。"
+
+#, fuzzy
+#~ msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
+#~ msgstr "抱歉，只有系統管理者可以變更硬體時鐘時期在中內核。"
+
+#~ msgid "read() to %s to wait for clock tick failed"
+#~ msgstr "%s 的 read() 等候時鐘週期失敗"
+
+#, fuzzy
+#~ msgid "set rtc alarm failed"
+#~ msgstr "設定 rtc 警示失敗"
+
+#, fuzzy
+#~ msgid "enable rtc alarm failed"
+#~ msgstr "啟用 rtc 警示失敗"
+
+#, fuzzy
+#~ msgid "suspend to \"%s\" unavailable"
+#~ msgstr "懸置到「%s」不得使用"
+
+#, fuzzy
+#~ msgid " -m, --mount unshare mounts namespace\n"
+#~ msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#, fuzzy
+#~ msgid " -u, --uts unshare UTS namespace (hostname etc)\n"
+#~ msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#, fuzzy
+#~ msgid " -i, --ipc unshare System V IPC namespace\n"
+#~ msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#, fuzzy
+#~ msgid " -n, --net unshare network namespace\n"
+#~ msgstr " -n, --noparity 設定同位到無\n"
+
+#, fuzzy
+#~ msgid "cannot open %s: %m"
+#~ msgstr "無法開啟 %s：%s"
+
+#, fuzzy
+#~ msgid "fread failed"
+#~ msgstr "fread 失敗"
+
+#~ msgid "Help Screen for cfdisk"
+#~ msgstr "cfdisk 的說明畫面"
+
+#~ msgid "disk drive."
+#~ msgstr "。"
+
+#~ msgid " `no'"
+#~ msgstr " `no'"
+
+#, fuzzy
+#~ msgid "Too small partition size specified."
+#~ msgstr "沒有 --date 選項指定的。"
+
+#, fuzzy
+#~ msgid "stat failed %s"
+#~ msgstr "stat 失敗 %s"
+
+#, fuzzy
+#~ msgid "faild to allocate iterator"
+#~ msgstr "配置迭代器時失敗"
+
+#, fuzzy
+#~ msgid "cannot open: %s"
+#~ msgstr "無法開啟 %s"
+
+#~ msgid "%s: stat failed"
+#~ msgstr "%s：stat 失敗"
+
+#, fuzzy
+#~ msgid "%s: lstat failed"
+#~ msgstr "%s：stat 失敗"
+
+#~ msgid "set blocksize"
+#~ msgstr "設定區塊大小"
+
+#~ msgid "usage:\n"
+#~ msgstr "用法：\n"
+
+#~ msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
+#~ msgstr "\t註記：elvtune 只適用於 2.4 內核\n"
+
+#~ msgid "missing blockdevice, use -h for help\n"
+#~ msgstr "缺少區塊裝置，使用 -h 以獲得說明\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "elvtune is only useful on older kernels;\n"
+#~ "for 2.6 use IO scheduler sysfs tunables instead..\n"
+#~ msgstr ""
+#~ "\n"
+#~ " elvtune 只適用於舊的內核；\n"
+#~ "於 2.6 請使用 IO 排程程式 sysfs tunables 做為替代。\n"
+
+#, fuzzy
+#~ msgid "Usage: %s [options] device\n"
+#~ msgstr "用法：%s [選項] 裝置\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -n, --no-verify disable the verification after the format\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -n, --no-verify 停用驗證之後格式\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "waidpid failed"
+#~ msgstr "waidpid 失敗"
+
+#, fuzzy
+#~ msgid " %s [options] file\n"
+#~ msgstr " %s [選項] 檔案\n"
+
+#, fuzzy
+#~ msgid " -x, --destination <dir> extract into directory\n"
+#~ msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#~ msgid "compiled without -x support"
+#~ msgstr "編譯時不具 -x 支援"
+
+#, fuzzy
+#~ msgid "Usage:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "For more information see mkfs(8).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 mkfs (8)。\n"
+
+#, fuzzy
+#~ msgid "edition number argument failed"
+#~ msgstr "編輯數字引數失敗"
+
+#~ msgid "one bad block\n"
+#~ msgstr "一個不良區塊\n"
+
+#, fuzzy
+#~ msgid "Bad swap header size, no label written."
+#~ msgstr "不當的交換頁首大小，沒有標貼手寫的。"
+
+#~ msgid "fsync failed"
+#~ msgstr "fsync 失敗"
+
+#, fuzzy
+#~ msgid "partition type hex or uuid"
+#~ msgstr "分割區類型十六進位或 uuid"
+
+#~ msgid "%s: Out of memory!\n"
+#~ msgstr "%s：記憶體不足！\n"
+
+# "無法建立 %s: %s\n"
+#~ msgid "Unusable"
+#~ msgstr "無法使用"
+
+#~ msgid "Disk has been changed.\n"
+#~ msgstr "磁碟已變更。\n"
+
+#~ msgid "Reboot the system to ensure the partition table is correctly updated.\n"
+#~ msgstr "系統重新開機以確保分割表正確地被更新。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: If you have created or modified any\n"
+#~ "DOS 6.x partitions, please see the cfdisk manual\n"
+#~ "page for additional information.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "警告：如果您已建立或修改任何\n"
+#~ "DOS 6.x 分割區，請參看 cfdisk 手冊\n"
+#~ "以獲得額外的資訊。\n"
+
+#~ msgid "FATAL ERROR"
+#~ msgstr "嚴重錯誤"
+
+#~ msgid "Press any key to exit cfdisk"
+#~ msgstr "按任何鍵以離開 cfdisk"
+
+#~ msgid "Cannot seek on disk drive"
+#~ msgstr "無法搜尋磁碟"
+
+#~ msgid "Cannot read disk drive"
+#~ msgstr "無法讀取磁碟"
+
+#~ msgid "Cannot write disk drive"
+#~ msgstr "無法寫入磁碟"
+
+#~ msgid "Too many partitions"
+#~ msgstr "分割區過多"
+
+#~ msgid "Partition begins before sector 0"
+#~ msgstr "分割區開端小於磁區 0"
+
+#~ msgid "Partition ends before sector 0"
+#~ msgstr "分割區結尾小於磁區 0"
+
+#~ msgid "Partition begins after end-of-disk"
+#~ msgstr "分割區開端大於磁碟末端"
+
+#~ msgid "Partition ends after end-of-disk"
+#~ msgstr "分割區結尾大於磁碟末端"
+
+#~ msgid "logical partitions not in disk order"
+#~ msgstr "邏輯分割區未按磁碟順序"
+
+#~ msgid "logical partitions overlap"
+#~ msgstr "邏輯分割區重疊"
+
+#~ msgid "enlarged logical partitions overlap"
+#~ msgstr "擴大的邏輯分割區重疊"
+
+#~ msgid "!!!! Internal error creating logical drive with no extended partition !!!!"
+#~ msgstr "!!!! 內部錯誤! 新增邏輯磁碟沒有用於擴展分割區 !!!!"
+
+#~ msgid "Cannot create logical drive here -- would create two extended partitions"
+#~ msgstr "無法在此新增邏輯磁碟 -- 如此將造成二個擴展分割區"
+
+#~ msgid "Menu item too long. Menu may look odd."
+#~ msgstr "選單項目太長，選單看起來會很奇怪。"
+
+#~ msgid "Illegal key"
+#~ msgstr "無效按鍵"
+
+#~ msgid "Create a new primary partition"
+#~ msgstr "新增一個主要分割區"
+
+#~ msgid "Create a new logical partition"
+#~ msgstr "新增一個邏輯分割區"
+
+#~ msgid "Cancel"
+#~ msgstr "取消"
+
+#~ msgid "Don't create a partition"
+#~ msgstr "不要新增一個分割區"
+
+#~ msgid "!!! Internal error !!!"
+#~ msgstr "!!! 內部錯誤 !!!"
+
+#~ msgid "Size (in MB): "
+#~ msgstr "大小 (單位 MB): "
+
+#~ msgid "Beginning"
+#~ msgstr "開始"
+
+#~ msgid "Add partition at beginning of free space"
+#~ msgstr "新增分割區於剩餘空間開頭位置"
+
+#~ msgid "Add partition at end of free space"
+#~ msgstr "新增分割區於剩餘空間末端"
+
+#~ msgid "No room to create the extended partition"
+#~ msgstr "已無多餘的磁碟空間可開啟擴充分割區"
+
+#~ msgid "No partition table. Starting with zero table."
+#~ msgstr "無分割表。以空的表格開始。"
+
+#~ msgid "Bad signature on partition table"
+#~ msgstr "分割表上有不當的簽章"
+
+#~ msgid "Do you wish to start with a zero table [y/N] ?"
+#~ msgstr "您想要以一個空的分割表開始嗎 [y/N] ?"
+
+#~ msgid "Cannot open disk drive"
+#~ msgstr "無法開啟磁碟"
+
+#~ msgid "Opened disk read-only - you have no permission to write"
+#~ msgstr "已開啟磁碟為唯讀 - 您無權限可寫入"
+
+#~ msgid "Cannot get disk size"
+#~ msgstr "無法取得磁碟大小"
+
+#~ msgid "Bad primary partition"
+#~ msgstr "壞的主要分割區"
+
+#~ msgid "Warning!! This may destroy data on your disk!"
+#~ msgstr "警告!! 這項操作可能會使您硬碟中的資料消失!"
+
+#~ msgid "Please enter `yes' or `no'"
+#~ msgstr "請鍵入 `yes' 或 `no'"
+
+#~ msgid "Writing partition table to disk..."
+#~ msgstr "正寫入分割表到硬碟…"
+
+#~ msgid "Wrote partition table to disk"
+#~ msgstr "已將分割表寫入硬碟"
+
+#~ msgid "Wrote partition table, but re-read table failed. Run partprobe(8), kpartx(8) or reboot to update table."
+#~ msgstr "已寫入分割表，但重讀失敗。 請執行 partprobe(8)、kpartx(8) 或重新開機以更新分割表。"
+
+#~ msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
+#~ msgstr "沒有主要分割區被標記為可開機. DOS MBR 無法由此開機."
+
+#~ msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this."
+#~ msgstr "超過一個主要分割區標記為可開機. DOS MBR 無法由此開機."
+
+#~ msgid "Enter filename or press RETURN to display on screen: "
+#~ msgstr "鍵入檔名或按 Enter 鍵以顯示於螢幕上: "
+
+#~ msgid "Disk Drive: %s\n"
+#~ msgstr "硬碟: %s\n"
+
+#~ msgid "Sector 0:\n"
+#~ msgstr "磁區 0:\n"
+
+#~ msgid "Sector %d:\n"
+#~ msgstr "磁區 %d:\n"
+
+#~ msgid " None "
+#~ msgstr " 無 "
+
+#~ msgid " Pri/Log"
+#~ msgstr " 主要/邏輯"
+
+#~ msgid " Primary"
+#~ msgstr " 主要的 "
+
+#~ msgid " Logical"
+#~ msgstr " 邏輯的"
+
+#~ msgid "(%02X)"
+#~ msgstr "(%02X)"
+
+#~ msgid "None"
+#~ msgstr "無"
+
+#~ msgid "Partition Table for %s\n"
+#~ msgstr "%s 的分割表\n"
+
+#~ msgid " First Last\n"
+#~ msgstr " 第一個 最後的\n"
+
+#~ msgid " # Type Sector Sector Offset Length Filesystem Type (ID) Flag\n"
+#~ msgstr " # 類型 磁區 磁區偏移值 長度 檔案系統類型 (ID) 旗標\n"
+
+#~ msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
+#~ msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
+
+#~ msgid " ---Starting---- ----Ending----- Start Number of\n"
+#~ msgstr " ---開始--- ----結束----- 開始 數量\n"
+
+#~ msgid " # Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors\n"
+#~ msgstr " # 旗標 磁頭 磁區 磁柱 ID 磁頭 磁區 磁柱 磁區 磁區數 \n"
+
+#~ msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
+#~ msgstr "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
+
+#~ msgid "Raw"
+#~ msgstr "原始"
+
+#~ msgid "Print the table using raw data format"
+#~ msgstr "用原始資料格式顯示分割表"
+
+#~ msgid "Print the table ordered by sectors"
+#~ msgstr "用磁區數大小顯示分割表"
+
+#~ msgid "Table"
+#~ msgstr "分割表"
+
+#~ msgid "Just print the partition table"
+#~ msgstr "只顯示此分割表"
+
+#~ msgid "Don't print the table"
+#~ msgstr "不顯示此分割表"
+
+#~ msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
+#~ msgstr "著作權©1994-1999 Kevin E.Martin & aeb"
+
+#~ msgid " g Change cylinders, heads, sectors-per-track parameters"
+#~ msgstr " g 變更磁柱、磁頭、每一磁軌磁區數各項參數"
+
+#~ msgid " WARNING: This option should only be used by people who"
+#~ msgstr " 警告: 此選項只適用於那些"
+
+#~ msgid " know what they are doing."
+#~ msgstr " 知道他自己在做什麼的人。"
+
+#~ msgid " m Maximize disk usage of the current partition"
+#~ msgstr " m 將分割區的用量最大化"
+
+#~ msgid " Note: This may make the partition incompatible with"
+#~ msgstr " 注意: 這將使分割區不相容於"
+
+#~ msgid " DOS, OS/2, ..."
+#~ msgstr " DOS, OS/2,…"
+
+#~ msgid " p Print partition table to the screen or to a file"
+#~ msgstr " p 顯示分割表於螢幕或輸出至檔案"
+
+#~ msgid " There are several different formats for the partition"
+#~ msgstr " 這裡有不同的分割區格式"
+
+#~ msgid " that you can choose from:"
+#~ msgstr " 以下您可以選擇:"
+
+#~ msgid " r - Raw data (exactly what would be written to disk)"
+#~ msgstr " r - 原始資料 (和您寫入硬碟中的一樣)"
+
+#~ msgid " s - Table ordered by sectors"
+#~ msgstr " s - 分割表以磁區數排列"
+
+#~ msgid " u Change units of the partition size display"
+#~ msgstr " u 變更分割區大小的顯示單位"
+
+#~ msgid " Rotates through MB, sectors and cylinders"
+#~ msgstr " 循環顯示 MB、磁區數和磁柱數"
+
+#~ msgid "CTRL-L Redraws the screen"
+#~ msgstr "CTRL-L 重新整理畫面(以免有殘影)"
+
+#~ msgid " ? Print this screen"
+#~ msgstr " ? 顯示此畫面"
+
+#~ msgid "Change cylinder geometry"
+#~ msgstr "變更磁柱結構"
+
+#~ msgid "Change head geometry"
+#~ msgstr "變更磁頭結構"
+
+#~ msgid "Change sector geometry"
+#~ msgstr "變更磁區結構"
+
+#~ msgid "Done"
+#~ msgstr "完成"
+
+#~ msgid "Done with changing geometry"
+#~ msgstr "變更結構完成"
+
+#~ msgid "Enter the number of cylinders: "
+#~ msgstr "鍵入磁柱數: "
+
+#~ msgid "Illegal cylinders value"
+#~ msgstr "磁柱數值不合法"
+
+#~ msgid "Enter the number of heads: "
+#~ msgstr "鍵入磁頭數字: "
+
+#~ msgid "Illegal heads value"
+#~ msgstr "磁頭數值不合法"
+
+#~ msgid "Enter the number of sectors per track: "
+#~ msgstr "鍵入每一磁軌的磁區數: "
+
+#~ msgid "Illegal sectors value"
+#~ msgstr "磁區數不合法"
+
+#~ msgid "Enter filesystem type: "
+#~ msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+
+#~ msgid "Cannot change FS Type to empty"
+#~ msgstr "無法變更檔案系統類型為空"
+
+#~ msgid "Cannot change FS Type to extended"
+#~ msgstr "無法變更檔案系統類型為擴展的"
+
+#~ msgid "Unk(%02X)"
+#~ msgstr "Unk(%02X)"
+
+#~ msgid ", NC"
+#~ msgstr ", NC"
+
+#~ msgid "NC"
+#~ msgstr "NC"
+
+#~ msgid "Pri/Log"
+#~ msgstr "主要/邏輯"
+
+#~ msgid "Unknown (%02X)"
+#~ msgstr "未知的 (%02X)"
+
+#~ msgid "Disk Drive: %s"
+#~ msgstr "硬碟: %s"
+
+#~ msgid "Size: %lld bytes, %lld MB"
+#~ msgstr "大小: %lld 位元組, %lld MB"
+
+#~ msgid "Size: %lld bytes, %lld.%lld GB"
+#~ msgstr "大小: %lld 位元組, %lld.%lld GB"
+
+#~ msgid "Heads: %d Sectors per Track: %d Cylinders: %lld"
+#~ msgstr "磁頭數: %d 每一磁軌的磁區數: %d 磁柱數: %lld"
+
+#~ msgid "Part Type"
+#~ msgstr "分割區類型"
+
+#~ msgid "FS Type"
+#~ msgstr "檔案系統類型"
+
+#~ msgid "[Label]"
+#~ msgstr "[標記名稱]"
+
+#~ msgid " Sectors"
+#~ msgstr " 磁區"
+
+#~ msgid " Cylinders"
+#~ msgstr " 磁柱"
+
+#~ msgid " Size (MB)"
+#~ msgstr " 大小 (MB)"
+
+#~ msgid " Size (GB)"
+#~ msgstr " 大小 (GB)"
+
+#~ msgid "No more partitions"
+#~ msgstr "已無多餘的分割區"
+
+#~ msgid "Change disk geometry (experts only)"
+#~ msgstr "變更磁碟結構 (老手適用)"
+
+#~ msgid "Maximize"
+#~ msgstr "最大化"
+
+#~ msgid "Maximize disk usage of the current partition (experts only)"
+#~ msgstr "使目前的分割區的磁碟使用最大化 (老手適用)"
+
+#~ msgid "Print"
+#~ msgstr "印出"
+
+#~ msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
+#~ msgstr "變更檔案系統的類型 (DOS, Linux, swap, OS/2 等等)"
+
+#~ msgid "Units"
+#~ msgstr "單位"
+
+#~ msgid "Change units of the partition size display (MB, sect, cyl)"
+#~ msgstr "變更分割區大小的顯示單位 (用 MB、磁區數或磁柱數)"
+
+#~ msgid "Cannot make this partition bootable"
+#~ msgstr "無法讓這個分割區變成可開機"
+
+#~ msgid "Cannot delete an empty partition"
+#~ msgstr "無法刪除一個空的分割區"
+
+#~ msgid "Cannot maximize this partition"
+#~ msgstr "無法將這個分割區最大化"
+
+#~ msgid "This partition is already in use"
+#~ msgstr "這個分割區已在使用中"
+
+#~ msgid "Cannot change the type of an empty partition"
+#~ msgstr "無法變更一個空分割區的類型"
+
+#~ msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
+#~ msgstr "版權©1994-2002 Kevin E. Martin & aeb\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ "Print version:\n"
+#~ " %s -v\n"
+#~ "Print partition table:\n"
+#~ " %s -P {r|s|t} [options] device\n"
+#~ "Interactive use:\n"
+#~ " %s [options] device\n"
+#~ "\n"
+#~ "Options:\n"
+#~ "-a: Use arrow instead of highlighting;\n"
+#~ "-z: Start with a zero partition table, instead of reading the pt from disk;\n"
+#~ "-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
+#~ " the number of heads and the number of sectors/track.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ "印出版本：\n"
+#~ " %s -v\n"
+#~ "印出分割表：\n"
+#~ " %s -P {r|s|t} [選項] 裝置\n"
+#~ "互動式使用：\n"
+#~ " %s [選項] 裝置\n"
+#~ "\n"
+#~ "選項：\n"
+#~ "-a: 使用箭頭以代替高亮度顯示；\n"
+#~ "-z: 以零分割表開始，以代替從磁碟讀取分割表；\n"
+#~ "-c C -h H -s S:強制變更內核認為的磁柱數量、\n"
+#~ " 磁頭數量和每一磁軌的磁區數量。\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "cannot parse number of cylinders"
+#~ msgstr "無法剖析磁柱數量"
+
+#, fuzzy
+#~ msgid "cannot parse number of heads"
+#~ msgstr "無法剖析前端數量"
+
+#, fuzzy
+#~ msgid "cannot parse number of sectors"
+#~ msgstr "無法剖析磁區數量"
+
+#~ msgid "Writing disklabel to %s.\n"
+#~ msgstr "將磁碟標籤寫入 %s。\n"
+
+#~ msgid "Last %s or +size or +sizeM or +sizeK"
+#~ msgstr "最後 %s 或 +size 或 +sizeM 或 +sizeK"
+
+#~ msgid "Reading disklabel of %s at sector %d.\n"
+#~ msgstr "於磁區 %2$d 讀取 %1$s 的磁碟標籤。\n"
+
+#~ msgid "BSD disklabel command (m for help): "
+#~ msgstr "BSD 磁碟標籤命令 (m 以獲得說明)："
+
+#~ msgid "drivedata: "
+#~ msgstr "磁碟資料："
+
+#~ msgid "# start end size fstype [fsize bsize cpg]\n"
+#~ msgstr "# 開始 結束 大小 檔案系統類型 [fsize bsize cpg]\n"
+
+#~ msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
+#~ msgstr "必須 <= 磁區/磁軌 * 磁軌/磁柱 (預設)。\n"
+
+#~ msgid "Warning: too many partitions (%d, maximum is %d).\n"
+#~ msgstr "警告：太多分割區 (%d, 最大值為 %d)。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Syncing disks.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "同步磁碟。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Usage:\n"
+#~ " %1$s [options] <disk> change partition table\n"
+#~ " %1$s [options] -l <disk> list partition table(s)\n"
+#~ " %1$s -s <partition> give partition size(s) in blocks\n"
+#~ "\n"
+#~ "Options:\n"
+#~ " -b <size> sector size (512, 1024, 2048 or 4096)\n"
+#~ " -c[=<mode>] compatible mode: 'dos' or 'nondos' (default)\n"
+#~ " -h print this help text\n"
+#~ " -u[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
+#~ " -v print program version\n"
+#~ " -C <number> specify the number of cylinders\n"
+#~ " -H <number> specify the number of heads\n"
+#~ " -S <number> specify the number of sectors per track\n"
+#~ "\n"
+#~ msgstr ""
+#~ "用法：\n"
+#~ " %1$s [選項] <disk> 變更分割表\n"
+#~ " %1$s [選項] -l<磁碟>清單分割表\n"
+#~ " %1$s -s<分割> 給出分割區大小在中區塊\n"
+#~ "\n"
+#~ "選項：\n"
+#~ " -b<大小> 磁區大小 (512,- 1024, 2048 或 4096)\n"
+#~ " -c[=< 模式>] 相容模式：'dos' 或 'nondos' (預設)\n"
+#~ " -h 印出這份說明文字\n"
+#~ " -u[=< 單位>] 顯示單位：'cylinders' 或 'sectors' (預設)\n"
+#~ " -v 列印程式版本\n"
+#~ " -C<數字> 指定磁柱數量\n"
+#~ " -H<數字> 指定前端數量\n"
+#~ " -S<數字> 指定磁區數量各軌段\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "unable to seek on %s"
+#~ msgstr "無法尋指於 %s"
+
+#, fuzzy
+#~ msgid "unable to write %s"
+#~ msgstr "無法寫入 %s"
+
+#, fuzzy
+#~ msgid "fatal error"
+#~ msgstr "嚴重錯誤"
+
+#~ msgid "Command action"
+#~ msgstr "命令動作"
+
+#~ msgid "You must set"
+#~ msgstr "您必須設定"
+
+#~ msgid "heads"
+#~ msgstr "磁頭"
+
+#~ msgid "sectors"
+#~ msgstr "磁區"
+
+#~ msgid " and "
+#~ msgstr " 和 "
+
+#~ msgid "Unsupported suffix: '%s'.\n"
+#~ msgstr "不受支援的字尾：「%s」。\n"
+
+#~ msgid ""
+#~ "Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
+#~ " 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
+#~ msgstr ""
+#~ "支援的單位: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
+#~ " 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
+
+#~ msgid "Using default value %u\n"
+#~ msgstr "使用預設值 %u\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s: %ld MB, %lld bytes"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s：%ld MB，%lld 位元組"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s: %ld.%ld GB, %llu bytes"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s：%ld.%ld GB，%llu 位元組"
+
+#, fuzzy
+#~ msgid "cannot write disk label"
+#~ msgstr "無法寫入磁碟標貼"
+
+#~ msgid ""
+#~ "\n"
+#~ "Error closing file\n"
+#~ msgstr ""
+#~ "\n"
+#~ "關閉檔案發生錯誤\n"
+
+#, fuzzy
+#~ msgid "Warning: setting sector offset for DOS compatibility\n"
+#~ msgstr "警告：設定磁區偏移用於 DOS 相容性\n"
+
+#~ msgid "cannot open %s\n"
+#~ msgstr "無法開啟 %s\n"
+
+#~ msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
+#~ msgstr "於 %s 偵測到 OSF/1 磁碟標籤，進入磁碟標籤模式。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
+#~ " switch off the mode (with command 'c')."
+#~ msgstr ""
+#~ "\n"
+#~ "警告：不宜再使用 DOS 相容模式。強烈建議\n"
+#~ " 關掉此模式 (利用命令「c」)。"
+
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
+#~ " change units to sectors.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "警告：不宜再用磁柱做為顯示單位。使用命令「u」以\n"
+#~ " 變更單位為磁區。\n"
+
+#~ msgid "New disk identifier (current 0x%08x): "
+#~ msgstr "新磁碟識別碼 (目前為 0x%08x)："
+
+#~ msgid "Partition %d is already defined. Delete it before re-adding it.\n"
+#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+
+#~ msgid "No free sectors available\n"
+#~ msgstr "沒有可用的磁區存在\n"
+
+#~ msgid "Last %1$s, +%2$s or +size{K,M,G}"
+#~ msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+
+#~ msgid " phys=(%d, %d, %d) "
+#~ msgstr " 實體=(%d, %d, %d) "
+
+#~ msgid "logical=(%d, %d, %d)\n"
+#~ msgstr "邏輯=(%d, %d, %d)\n"
+
+#, fuzzy
+#~ msgid "Warning: bad start-of-data in partition %zd\n"
+#~ msgstr "警告：在分割區 %d 中不當的資料起始\n"
+
+#, fuzzy
+#~ msgid "Warning: partition %zd overlaps partition %zd.\n"
+#~ msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
+
+#, fuzzy
+#~ msgid "Warning: partition %zd is empty\n"
+#~ msgstr "警告：分割區 %d 是空的\n"
+
+#~ msgid "Adding a primary partition\n"
+#~ msgstr "加入一個主要分割區\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Partition type:\n"
+#~ " p primary (%zd primary, %d extended, %zd free)\n"
+#~ "%s\n"
+#~ "Select (default %c): "
+#~ msgstr ""
+#~ "分割區類型：\n"
+#~ " p 主要 (%d 主要，%d 進階，%d 自由)\n"
+#~ "%s\n"
+#~ "選取 (預設 %c)："
+
+#, fuzzy
+#~ msgid " e extended"
+#~ msgstr " e 進階"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: If you have created or modified any DOS 6.xpartitions, please see the fdisk manual page for additionalinformation.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "警告：如果您已建立或修改任何 DOS 6.x\n"
+#~ "分割區，請參看 fdisk 線上手冊以獲得額外\n"
+#~ "資訊。\n"
+
+#~ msgid ""
+#~ "This doesn't look like a partition table\n"
+#~ "Probably you selected the wrong device.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "這看起來不像是一個分割表\n"
+#~ "您大概選了錯誤的裝置。\n"
+#~ "\n"
+
+#~ msgid "%*s Boot Start End Blocks Id System\n"
+#~ msgstr "%*s 開機 開始 結束 區塊 識別號 系統\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s: %d heads, %llu sectors, %llu cylinders\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s：%d 前端，%llu 磁區，%llu 磁柱\n"
+#~ "\n"
+
+#~ msgid "Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID\n"
+#~ msgstr "Nr AF 磁頭 磁區 磁柱 磁頭 磁區 磁柱 開始 大小 ID\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "\tThere is a valid Mac label on this disk.\n"
+#~ "\tUnfortunately fdisk(1) cannot handle these disks.\n"
+#~ "\tUse either pdisk or parted to modify the partition table.\n"
+#~ "\tNevertheless some advice:\n"
+#~ "\t1. fdisk will destroy its contents on write.\n"
+#~ "\t2. Be sure that this disk is NOT a still vital\n"
+#~ "\t part of a volume group. (Otherwise you may\n"
+#~ "\t erase the other disks as well, if unmirrored.)\n"
+#~ msgstr ""
+#~ "\n"
+#~ "\t有效的 Mac 標籤位於這個磁碟。\n"
+#~ "\t不幸地 fdisk(1) 無法處理這些磁碟。\n"
+#~ "\t必須使用 pdisk 或 parted 以修改分割表。\n"
+#~ "\t不論如何還是有些建言：\n"
+#~ "\t1.fdisk 將於寫入時銷毀它的內容。\n"
+#~ "\t2.確認這個磁碟並非仍是\n"
+#~ "\t 卷冊群的現用部分。(否則如果沒有鏡像備份的話，\n"
+#~ "\t 您也許同樣會清除其他磁碟。)\n"
+
+#~ msgid ""
+#~ "\tSorry - this fdisk cannot handle Mac disk labels.\n"
+#~ "\tIf you want to add DOS-type partitions, create\n"
+#~ "\ta new empty DOS partition table first. (Use o.)\n"
+#~ "\tWARNING: This will destroy the present disk contents.\n"
+#~ msgstr ""
+#~ "\t抱歉 - fdisk 無法處理 Mac 磁碟標籤。\n"
+#~ "\t如果您要加入 DOS 類型分割區，請先建立\n"
+#~ "\t新的空 DOS 分割表。(使用 o.)\n"
+#~ "\t警告：這將銷毀現有磁碟內容。\n"
+
+#~ msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n"
+#~ msgstr "根據 MIPS 電腦系統公司，標籤必須包含不超過 512 位元組\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s (SGI disk label): %d heads, %llu sectors, %llu cylinders\n"
+#~ "Units = %s of %d * %ld bytes\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (SGI 磁碟標貼)：%d 前端，%llu 磁區，%llu 磁柱\n"
+#~ "單位=%s 的 %d * %ld 位元組\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "----- partitions -----\n"
+#~ "Pt# %*s Info Start End Sectors Id System\n"
+#~ msgstr ""
+#~ "----- 分割區 -----\n"
+#~ "Pt# %*s 資訊 開始 結束 磁區 識別號 系統\n"
+
+#~ msgid ""
+#~ "----- Bootinfo -----\n"
+#~ "Bootfile: %s\n"
+#~ "----- Directory Entries -----\n"
+#~ msgstr ""
+#~ "----- 開機資訊 -----\n"
+#~ "開機檔案：%s\n"
+#~ "----- 目錄項目 -----\n"
+
+#, fuzzy
+#~ msgid "%2zd: %-10s sector%5u size%8u\n"
+#~ msgstr "%2d: %-10s 磁區%5u 大小%8u\n"
+
+#~ msgid "No partitions defined\n"
+#~ msgstr "無已定義分割區\n"
+
+#~ msgid ""
+#~ "The entire disk partition is only %d diskblock large,\n"
+#~ "but the disk is %d diskblocks long.\n"
+#~ msgstr ""
+#~ "整個磁碟分割區大小只有 %d 磁碟區塊，\n"
+#~ "但是這個磁碟大小為 %d 磁碟區塊。\n"
+
+#~ msgid "Partition %d does not start on cylinder boundary.\n"
+#~ msgstr "分割區 %d 並非始於磁柱邊界。\n"
+
+#~ msgid "Partition %d does not end on cylinder boundary.\n"
+#~ msgstr "分割區 %d 並非終於磁柱邊界。\n"
+
+#, fuzzy
+#~ msgid "Partition %zd is already defined. Delete it before re-adding it.\n"
+#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+
+#~ msgid "You will get a partition overlap on the disk. Fix it first!\n"
+#~ msgstr "您的磁碟上將會有重疊的分割區，請先修正它！\n"
+
+#, fuzzy
+#~ msgid "Building a new SGI disklabel.\n"
+#~ msgstr "建立新的 SGI disklabel。\n"
+
+#, fuzzy
+#~ msgid "HDIO_GETGEO ioctl failed on %s"
+#~ msgstr "HDIO_GETGEO ioctl 失敗的於 %s"
+
+#, fuzzy
+#~ msgid ""
+#~ "Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu.\n"
+#~ "This value may be truncated for devices > 33.8 GB.\n"
+#~ msgstr ""
+#~ "警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
+#~ "這個值也許會被截斷用於裝置>33.8 GB。\n"
+
+#~ msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
+#~ msgstr "識別號=%02x\t開始=%d\t長度=%d\n"
+
+#, fuzzy
+#~ msgid "Trying to keep parameters of partitions already set.\n"
+#~ msgstr "嘗試保持參數的分割區已經設定。\n"
+
+#~ msgid "YES\n"
+#~ msgstr "YES\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
+#~ "%llu cylinders, %d alternate cylinders, %d physical cylinders\n"
+#~ "%d extra sects/cyl, interleave %d:1\n"
+#~ "Label ID: %s\n"
+#~ "Volume ID: %s\n"
+#~ "Units = %s of %d * 512 bytes\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (Sun 磁碟標貼)：%u 前端，%llu 磁區，%d rpm\n"
+#~ "%llu 磁柱，%d 交替磁柱，%d 實體磁柱\n"
+#~ "%d 額外 sects/cyl，交插 %d:1\n"
+#~ "標貼識別號：%s\n"
+#~ "音量識別號：%s\n"
+#~ "單位=%s 的 %d * 512 位元組\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %llu cylinders\n"
+#~ "Units = %s of %d * 512 bytes\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (Sun 磁碟標貼)：%u 前端，%llu 磁區，%llu 磁柱\n"
+#~ "單位=%s 的 %d * 512 位元組\n"
+#~ "\n"
+
+#~ msgid "%*s Flag Start End Blocks Id System\n"
+#~ msgstr "%*s 旗標 開始 結束 區塊 識別號 系統\n"
+
+#~ msgid "seek error on %s - cannot seek to %lu\n"
+#~ msgstr "於 %s 搜尋錯誤 - 無法搜尋至 %lu\n"
+
+#~ msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
+#~ msgstr "搜尋錯誤：想要 0x%08x%08x, 得到 0x%08x%08x\n"
+
+#~ msgid "read error on %s - cannot read sector %lu\n"
+#~ msgstr "於 %s 讀取錯誤 - 無法讀取磁區 %lu\n"
+
+#~ msgid "write error on %s - cannot write sector %lu\n"
+#~ msgstr "於 %s 寫入錯誤 - 無法寫入磁區 %lu\n"
+
+#~ msgid "cannot open partition sector save file (%s)\n"
+#~ msgstr "無法開啟分割磁區的儲存檔案 (%s)\n"
+
+#~ msgid "write error on %s\n"
+#~ msgstr "於 %s 寫入錯誤\n"
+
+#~ msgid "cannot stat partition restore file (%s)\n"
+#~ msgstr "無法識別分割區的還原檔案狀態 (%s)\n"
+
+#~ msgid "partition restore file has wrong size - not restoring\n"
+#~ msgstr "分割區還原檔案大小有誤 - 無法還原\n"
+
+#~ msgid "cannot open partition restore file (%s)\n"
+#~ msgstr "無法開啟分割區的還原檔案 (%s)\n"
+
+#~ msgid "error reading %s\n"
+#~ msgstr "讀取 %s 時發生錯誤\n"
+
+#~ msgid "cannot open device %s for writing\n"
+#~ msgstr "無法開啟裝置 %s 以供寫入\n"
+
+#~ msgid "error writing sector %lu on %s\n"
+#~ msgstr "於 %2$s 寫入磁區 %1$lu 時發生錯誤\n"
+
+#~ msgid "Disk %s: cannot get geometry\n"
+#~ msgstr "磁碟 %s: 無法取得結構參數\n"
+
+#~ msgid "Disk %s: cannot get size\n"
+#~ msgstr "磁碟 %s: 無法取得大小\n"
+
+#~ msgid ""
+#~ "Warning: start=%lu - this looks like a partition rather than\n"
+#~ "the entire disk. Using fdisk on it is probably meaningless.\n"
+#~ "[Use the --force option if you really want this]\n"
+#~ msgstr ""
+#~ "警告：開始=%lu - 這看來像是分割區而非\n"
+#~ "整個磁碟。於其上使用 fdisk 可能不具意義的。\n"
+#~ "[如果您確實想要如此，就使用 --force 選項]\n"
+
+#~ msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
+#~ msgstr "警告：HDIO_GETGEO 表示具有 %lu 個磁頭\n"
+
+#~ msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
+#~ msgstr "警告：HDIO_GETGEO 表示具有 %lu 段磁區\n"
+
+#~ msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
+#~ msgstr "警告：BLKGETSIZE/HDIO_GETGEO 表示具有 %lu 圈磁柱\n"
+
+#~ msgid ""
+#~ "Warning: unlikely number of sectors (%lu) - usually at most 63\n"
+#~ "This will give problems with all software that uses C/H/S addressing.\n"
+#~ msgstr ""
+#~ "警告：不太可能的磁區數量 (%lu) - 通常最多為 63\n"
+#~ "這將對於使用 C/H/S 定址的軟體造成問題。\n"
+
+#~ msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
+#~ msgstr "分割區 %2$s 的 %1$s 有不可能的磁頭數值：%3$lu (應該介於 0-%4$lu)\n"
+
+#~ msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n"
+#~ msgstr "分割區 %1$s 的 %2$s 有不可能的磁區數值：%3$lu (應該介於 1-%4$lu)\n"
+
+#~ msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n"
+#~ msgstr "分割區 %1$s 的 %2$s 有不可能的磁柱數值：%3$lu (應該介於 0-%4$lu)\n"
+
+#~ msgid ""
+#~ "The command to re-read the partition table failed.\n"
+#~ "Run partprobe(8), kpartx(8) or reboot your system now,\n"
+#~ "before using mkfs\n"
+#~ msgstr ""
+#~ "重新讀取分割表的命令失敗。\n"
+#~ "在使用 mkfs 之前，請執行 partprobe(8),kpartx(8) 或將您的系統重新開機\n"
+
+#~ msgid "Error closing %s\n"
+#~ msgstr "關閉 %s 時發生錯誤\n"
+
+#~ msgid "%s: no such partition\n"
+#~ msgstr "%s：無此類分割區\n"
+
+#~ msgid "unrecognized format - using sectors\n"
+#~ msgstr "無法辨識的格式 - 使用磁區數\n"
+
+#~ msgid "unimplemented format - using %s\n"
+#~ msgstr "尚未實作的格式 - 使用 %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Units: cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：磁柱的 %lu 位元組，區塊的 1024 位元組，計數從 %d\n"
+#~ "\n"
+
+#~ msgid " Device Boot Start End #cyls #blocks Id System\n"
+#~ msgstr " 裝置開機起始 結束 磁柱數 區塊數 識別號 系統\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Units: sectors of 512 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：磁區的 512 位元組，計數從 %d\n"
+#~ "\n"
+
+#~ msgid " Device Boot Start End #sectors Id System\n"
+#~ msgstr " 裝置開機 起始 結束 磁區數 識別號 系統\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Units: blocks of 1024 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：區塊的 1024 位元組，計數從 %d\n"
+#~ "\n"
+
+#~ msgid " Device Boot Start End #blocks Id System\n"
+#~ msgstr " 裝置開機 起始 結束 區塊數 識別號 系統\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：1 MiB=1024*1024 位元組，區塊的 1024 位元組，計數從 %d\n"
+#~ "\n"
+
+#~ msgid " Device Boot Start End MiB #blocks Id System\n"
+#~ msgstr " 裝置開機起始 結束 MiB 區塊數 識別號 系統\n"
+
+#~ msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "\t\t起始：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
+
+#~ msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "\t\t結束：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
+
+#~ msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
+#~ msgstr "分割區結束於磁柱 %ld，位於磁碟末端之後\n"
+
+#~ msgid "No partitions found\n"
+#~ msgstr "找不到分割區\n"
+
+#~ msgid ""
+#~ "Warning: The partition table looks like it was made\n"
+#~ " for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
+#~ "For this listing I'll assume that geometry.\n"
+#~ msgstr ""
+#~ "警告：分割表看起來像是\n"
+#~ "用於 C/H/S=*/%ld/%ld (而非 %ld/%ld/%ld)。\n"
+#~ "我將會假設該結構參數以用於此列表。\n"
+
+#, fuzzy
+#~ msgid "no partition table present."
+#~ msgstr "沒有分割表呈現。"
+
+#, fuzzy
+#~ msgid "strange, only %d partitions defined."
+#~ msgstr "怪異的，只有 %d 分割區定義。"
+
+#~ msgid "Warning: partition %s has size 0 but is not marked Empty\n"
+#~ msgstr "警告：分割區 %s 大小為 0 但是並未標記為空\n"
+
+#~ msgid "Warning: partition %s has size 0 and is bootable\n"
+#~ msgstr "警告：分割區 %s 大小為 0 且為可開機\n"
+
+#~ msgid "Warning: partition %s has size 0 and nonzero start\n"
+#~ msgstr "警告：分割區 %s 大小為 0 且以非零值開始\n"
+
+#, fuzzy
+#~ msgid "Warning: partition %s is not contained in partition %s\n"
+#~ msgstr "警告：分割 %s 未被包含在中分割 %s\n"
+
+#, fuzzy
+#~ msgid "Warning: partitions %s and %s overlap\n"
+#~ msgstr "警告：分割區 %s 和 %s 重疊\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Warning: partition %s contains part of the partition table (sector %llu),\n"
+#~ "and will destroy it when filled\n"
+#~ msgstr ""
+#~ "警告：分割 %s 含有部分的分割表 (磁區 %llu)，\n"
+#~ "並將銷毀它時 filled\n"
+
+#~ msgid "Warning: partition %s starts at sector 0\n"
+#~ msgstr "警告：分割區 %s 開始於磁區 0\n"
+
+#~ msgid "Warning: partition %s extends past end of disk\n"
+#~ msgstr "警告：分割區 %s 延伸超過磁碟末端\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Warning: partition %s has size %d.%d TB (%llu bytes),\n"
+#~ "which is larger than the %llu bytes limit imposed\n"
+#~ "by the DOS partition table for %d-byte sectors\n"
+#~ msgstr ""
+#~ "警告：分割 %s 有大小 %d.%d TB (%llu 位元組)，\n"
+#~ "該項是大於 %llu 位元組限制施加\n"
+#~ "由 DOS 分割表用於 %d-byte 磁區\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
+#~ "which exceeds the DOS partition table limit of %llu sectors\n"
+#~ msgstr ""
+#~ "警告：分割 %s 開始於磁區 %llu (%d.%d TB 用於 %d-byte 磁區)，\n"
+#~ "該項超出 DOS 分割表限制的 %llu 磁區\n"
+
+#~ msgid ""
+#~ "Among the primary partitions, at most one can be extended\n"
+#~ " (although this is not a problem under Linux)\n"
+#~ msgstr ""
+#~ "在主要分割區之中，最多只能有一個是擴充分割區\n"
+#~ "(雖然這在 Linux 之下並不是個問題)\n"
+
+#~ msgid "Warning: partition %s does not start at a cylinder boundary\n"
+#~ msgstr "警告：分割區 %s 並非啟始於磁柱邊界\n"
+
+#~ msgid "Warning: partition %s does not end at a cylinder boundary\n"
+#~ msgstr "警告：分割區 %s 並非結束於磁柱邊界\n"
+
+#~ msgid ""
+#~ "Warning: more than one primary partition is marked bootable (active)\n"
+#~ "This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
+#~ msgstr ""
+#~ "警告：超過一個的主要分割區被標記為可開機的 (作用中)\n"
+#~ "這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
+
+#~ msgid ""
+#~ "Warning: usually one can boot from primary partitions only\n"
+#~ "LILO disregards the `bootable' flag.\n"
+#~ msgstr ""
+#~ "警告：通常只可以從主要分割區開機\n"
+#~ "LILO 並不理會「可開機的」旗標。\n"
+
+#~ msgid ""
+#~ "Warning: no primary partition is marked bootable (active)\n"
+#~ "This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
+#~ msgstr ""
+#~ "警告：沒有主要分割區被標記為可開機的 (作用中)\n"
+#~ "這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
+
+#~ msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "分割區 %s：啟始：(c,h,s) 預期為 (%ld ,%ld ,%ld) 但找到 (%ld ,%ld ,%ld)\n"
+
+#~ msgid "end"
+#~ msgstr "結束"
+
+#~ msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "分割區 %s：結束：(c,h,s) 預期為 (%ld ,%ld ,%ld) 找到 (%ld ,%ld ,%ld)\n"
+
+#~ msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
+#~ msgstr "分割區 %s 結束於磁柱 %ld，位於磁碟的末端之後\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Warning: shifted start of the extd partition from %lld to %lld\n"
+#~ "(For listing purposes only. Do not change its contents.)\n"
+#~ msgstr ""
+#~ "警告：Shift 的開始的 extd 分割從 %lld 到 %lld\n"
+#~ "(用於列表宗旨只有。不變更它的內容.)\n"
+
+#~ msgid ""
+#~ "Warning: extended partition does not start at a cylinder boundary.\n"
+#~ "DOS and Linux will interpret the contents differently.\n"
+#~ msgstr ""
+#~ "警告：擴充分割區非啟始於磁柱邊界。\n"
+#~ "DOS 和 Linux 將對內容有不同解譯。\n"
+
+#~ msgid "ERROR: sector %lu does not have an msdos signature\n"
+#~ msgstr "錯誤：磁區 %lu 沒有 msdos 簽章\n"
+
+#, fuzzy
+#~ msgid "too many partitions - ignoring those past nr (%zu)\n"
+#~ msgstr "太多分割區 - 忽略那些過去 nr (%ld)\n"
+
+#~ msgid "tree of partitions?\n"
+#~ msgstr "分割區的樹狀圖？\n"
+
+#~ msgid "detected Disk Manager - unable to handle that\n"
+#~ msgstr "偵測到磁碟管理員 - 無法處理它\n"
+
+#~ msgid "DM6 signature found - giving up\n"
+#~ msgstr "找到 DM6 簽章 - 放棄\n"
+
+#~ msgid "strange..., an extended partition of size 0?\n"
+#~ msgstr "很奇怪…，大小為 0 的擴充分割區？\n"
+
+#~ msgid "strange..., a BSD partition of size 0?\n"
+#~ msgstr "很奇怪…，大小為 0 的 BSD 分割區？\n"
+
+#~ msgid "-n flag was given: Nothing changed\n"
+#~ msgstr "-n 旗標已給定：沒有改變任何東西\n"
+
+#~ msgid "Failed saving the old sectors - aborting\n"
+#~ msgstr "儲存舊的磁區時失敗 - 放棄\n"
+
+#~ msgid "Failed writing the partition on %s\n"
+#~ msgstr "寫入分割區於 %s 時失敗\n"
+
+#, fuzzy
+#~ msgid "long or incomplete input line - quitting"
+#~ msgstr "長或不完整輸入列 - 離開"
+
+#, fuzzy
+#~ msgid "input error: `=' expected after %s field"
+#~ msgstr "輸入錯誤：『=』預期的之後 %s 欄位"
+
+#, fuzzy
+#~ msgid "input error: unexpected character %c after %s field"
+#~ msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
+
+#, fuzzy
+#~ msgid "unrecognized input: %s"
+#~ msgstr "無法辨識的輸入：%s"
+
+#~ msgid "number too big\n"
+#~ msgstr "數字太大\n"
+
+#~ msgid "trailing junk after number\n"
+#~ msgstr "數字之後尾隨無用物\n"
+
+#~ msgid "no room for partition descriptor\n"
+#~ msgstr "沒有空間可用於分割區描述\n"
+
+#~ msgid "cannot build surrounding extended partition\n"
+#~ msgstr "無法圍繞擴充分割區建立\n"
+
+#~ msgid "too many input fields\n"
+#~ msgstr "太多輸入欄位\n"
+
+#~ msgid "No room for more\n"
+#~ msgstr "沒有空間可容納更多\n"
+
+#~ msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
+#~ msgstr "警告：給定的大小 (%lu) 超出所允許的最大值 (%lu)\n"
+
+#~ msgid "Warning: empty partition\n"
+#~ msgstr "警告：空的分割區\n"
+
+#~ msgid "Warning: bad partition start (earliest %lu)\n"
+#~ msgstr "警告：不當的分割區啟始 (最先 %lu)\n"
+
+#~ msgid "unrecognized bootable flag - choose - or *\n"
+#~ msgstr "無法辨識的可開機旗標 - 選擇 - 或 *\n"
+
+#~ msgid "partial c,h,s specification?\n"
+#~ msgstr "部分 c,h,s 規格？\n"
+
+#~ msgid "Extended partition not where expected\n"
+#~ msgstr "擴充分割區不在預期的位置\n"
+
+#, fuzzy
+#~ msgid "bad input"
+#~ msgstr "不當的輸入"
+
+#~ msgid "too many partitions\n"
+#~ msgstr "太多分割區\n"
+
+#~ msgid ""
+#~ "Input in the following format; absent fields get a default value.\n"
+#~ "<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
+#~ "Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
+#~ msgstr ""
+#~ "以下列的格式輸入；缺值欄位將取得預設值。\n"
+#~ "<啟始> <大小> <類型 [E,S,L,X, 十六進位]> <可開機 [-,*]> <c,h,s> <c,h,s>\n"
+#~ "常常您只有需要指定 <啟始> 和 <大小> (也許還有 <類型>)。\n"
+
+#, fuzzy
+#~ msgid " %s [options] <device> [...]\n"
+#~ msgstr " %s [選項] <device> [...]\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -s, --show-size list size of a partition\n"
+#~ " -c, --id change or print partition Id\n"
+#~ " --change-id change Id\n"
+#~ " --print-id print Id\n"
+#~ msgstr ""
+#~ " -s, --show-size 清單大小的分割\n"
+#~ " -c, --id 變更或列印分割識別號\n"
+#~ " --change-id 變更識別號\n"
+#~ " --print-id 列印識別號\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -l, --list list partitions of each device\n"
+#~ " -d, --dump idem, but in a format suitable for later input\n"
+#~ " -i, --increment number cylinders etc. from 1 instead of from 0\n"
+#~ " -u, --unit <letter> units to be used; <letter> can be one of\n"
+#~ " S (sectors), C (cylinders), B (blocks), or M (MB)\n"
+#~ msgstr ""
+#~ " -l, --list 清單分割區的每個裝置\n"
+#~ " -d, --dump idem，但是在中格式適用稍後輸入\n"
+#~ " -i, --increment 數字磁柱等項從 1 以代替從 0\n"
+#~ " -u, --unit <letter> 單位為使用；<字母>可以是之一\n"
+#~ " S (磁區)，C (磁柱)，B (區塊)，或公尺 (MB)\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -1, --one-only reserved option that does nothing currently\n"
+#~ " -T, --list-types list the known partition types\n"
+#~ " -D, --DOS for DOS-compatibility: waste a little space\n"
+#~ " -E, --DOS-extended DOS extended partition compatibility\n"
+#~ " -R, --re-read make the kernel reread the partition table\n"
+#~ msgstr ""
+#~ " -1, --one-only 保留的選項該沒做任何事目前\n"
+#~ " -T, --list-types 清單已知分割區類型\n"
+#~ " -D, --DOS 用於 DOS-compatibility：waste 小型空格\n"
+#~ " -E, --DOS-extended DOS 進階分割相容性\n"
+#~ " -R, --re-read 製作內核重新讀取分割表\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -N <number> change only the partition with this <number>\n"
+#~ " -n do not actually write to disk\n"
+#~ " -O <file> save the sectors that will be overwritten to <file>\n"
+#~ " -I <file> restore sectors from <file>\n"
+#~ msgstr ""
+#~ " -N <number> 變更只有分割與這個<數字>\n"
+#~ " -n 不實際的寫入磁碟\n"
+#~ " -O<檔案> 儲存磁區該將被覆寫到<檔案>\n"
+#~ " -I<檔案> 還原磁區從<檔案>\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -V, --verify check that the listed partitions are reasonable\n"
+#~ " -v, --version display version information and exit\n"
+#~ " -h, --help display this help text and exit\n"
+#~ msgstr ""
+#~ " -V, --verify 檢查該清單的分割區是 reasonable\n"
+#~ " -v, --version 顯示版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Dangerous options:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "危險選項：\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -f, --force disable all consistency checking\n"
+#~ " --no-reread do not check whether the partition is in use\n"
+#~ " -q, --quiet suppress warning messages\n"
+#~ " -L, --Linux do not complain about things irrelevant for Linux\n"
+#~ msgstr ""
+#~ " -f, --force 全部停用一致性檢查\n"
+#~ " --no-reread 不檢查是否分割是在中使用\n"
+#~ " -q, --quiet 抑制警告訊息\n"
+#~ " -L, --Linux 不抱怨關於 irrelevant 用於 Linux\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -g, --show-geometry print the kernel's idea of the geometry\n"
+#~ " -G, --show-pt-geometry print geometry guessed from the partition table\n"
+#~ msgstr ""
+#~ " -g, --show-geometry 列印內核主意的幾何位置\n"
+#~ " -G, --show-pt-geometry 列印幾何位置猜測的從分割表\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -A, --activate[=<device>] activate bootable flag\n"
+#~ " -U, --unhide[=<dev>] set partition unhidden\n"
+#~ " -x, --show-extended also list extended partitions in the output,\n"
+#~ " or expect descriptors for them in the input\n"
+#~ msgstr ""
+#~ " -A, --activate [=<device>] 啟用可開機的旗標\n"
+#~ " -U, --unhide [=<dev>] 設定分割 unhidden\n"
+#~ " -x, --show-extended 也清單進階分割區在中輸出，\n"
+#~ " 或預期描述元用於它們在中輸入\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --leave-last do not allocate the last cylinder\n"
+#~ " --IBM same as --leave-last\n"
+#~ msgstr ""
+#~ " --leave-last 不配置最後一筆磁柱\n"
+#~ " --IBM 如同 --leave-last\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --in-order partitions are in order\n"
+#~ " --not-in-order partitions are not in order\n"
+#~ " --inside-outer all logicals inside outermost extended\n"
+#~ " --not-inside-outer not all logicals inside outermost extended\n"
+#~ msgstr ""
+#~ " --in-order 分割區是在中排序\n"
+#~ " --not-in-order 分割區不是在中排序\n"
+#~ " --inside-outer 所有邏輯的內部 outermost 進階\n"
+#~ " --not-inside-outer 並非所有邏輯的內部 outermost 進階\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --nested every partition is disjoint from all others\n"
+#~ " --chained like nested, but extended partitions may lie outside\n"
+#~ " --onesector partitions are mutually disjoint\n"
+#~ msgstr ""
+#~ " --nested 每分割是 disjoint 從所有其他人\n"
+#~ " --chained 如同巢狀，但是進階分割區也許會 lie 外側\n"
+#~ " --onesector 分割區是交互 disjoint\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Override the detected geometry using:\n"
+#~ " -C, --cylinders <number> set the number of cylinders to use\n"
+#~ " -H, --heads <number> set the number of heads to use\n"
+#~ " -S, --sectors <number> set the number of sectors to use\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "強制變更偵測到幾何位置使用：\n"
+#~ " -C, --cylinders <number> 設定磁柱數量以使用\n"
+#~ " -H, --heads<數字> 設定前端數量以使用\n"
+#~ " -S, --sectors<數字> 設定磁區數量以使用\n"
+#~ "\n"
+
+#~ msgid "%s device\t\t list active partitions on device\n"
+#~ msgstr "%s 裝置\t\t 列出裝置上的作用中分割區\n"
+
+#~ msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
+#~ msgstr "%s 裝置 n1 n2…啟用分割區 n1…, 停用其餘的\n"
+
+#~ msgid "%s -An device\t activate partition n, inactivate the other ones\n"
+#~ msgstr "%s -An 裝置\t 啟用分割區 n, 停用另外一個\n"
+
+#, fuzzy
+#~ msgid "invalid number of partitions argument"
+#~ msgstr "無效的分割區數量引數"
+
+#, fuzzy
+#~ msgid "usage: sfdisk --print-id device partition-number"
+#~ msgstr "用法：sfdisk --print-id 裝置分割區編號"
+
+#, fuzzy
+#~ msgid "usage: sfdisk --change-id device partition-number Id"
+#~ msgstr "用法：sfdisk --change-id 裝置分割區編號識別號"
+
+#, fuzzy
+#~ msgid "usage: sfdisk --id device partition-number [Id]"
+#~ msgstr "用法：sfdisk --id 裝置分割區編號 [識別號]"
+
+#, fuzzy
+#~ msgid "can specify only one device (except with -l or -s)"
+#~ msgstr "可以指定只有一個裝置 (除了與 -l 或 -s)"
+
+#, fuzzy
+#~ msgid "cannot open %s read-write"
+#~ msgstr "無法開啟 %s 可讀可寫"
+
+#, fuzzy
+#~ msgid "cannot open %s for reading"
+#~ msgstr "無法開啟 %s 用於讀取"
+
+#~ msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
+#~ msgstr "%s：%ld 磁柱，%ld 磁頭，%ld 磁區/磁軌\n"
+
+#~ msgid "bad active byte: 0x%x instead of 0x80\n"
+#~ msgstr "不當的作用中位元組：0x%x 而非 0x80\n"
+
+#~ msgid ""
+#~ "Done\n"
+#~ "\n"
+#~ msgstr ""
+#~ "完成\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "You have %d active primary partitions. This does not matter for LILO,\n"
+#~ "but the DOS MBR will only boot a disk with 1 active partition.\n"
+#~ msgstr ""
+#~ "您有 %d 塊作用中的主要分割區。這個不會影響到 LILO，\n"
+#~ "但是 DOS MBR 只能將具有一塊作用中分割區的磁碟開機。\n"
+
+#, fuzzy
+#~ msgid "partition %s has id %x and is not hidden"
+#~ msgstr "分割 %s 有識別號 %x 和未被隱藏"
+
+#, fuzzy
+#~ msgid "Bad Id %lx"
+#~ msgstr "不當的識別號 %lx"
+
+#, fuzzy
+#~ msgid "Fatal error: cannot find %s"
+#~ msgstr "嚴重錯誤：找不到 %s"
+
+#~ msgid "Warning: %s is not a block device\n"
+#~ msgstr "警告：%s 並非區塊裝置\n"
+
+#~ msgid "OK\n"
+#~ msgstr "確定\n"
+
+#, fuzzy
+#~ msgid "Partition %d does not exist, cannot change it"
+#~ msgstr "分割 %d 不存在，無法變更它"
+
+#, fuzzy
+#~ msgid ""
+#~ "I don't like these partitions - nothing changed.\n"
+#~ "(If you really want this, use the --force option.)"
+#~ msgstr ""
+#~ "我不如同這些分割區 - 沒有任何東西變更。\n"
+#~ "(如果您真的要想要這個，使用 --force 選項.)"
+
+#~ msgid "I don't like this - probably you should answer No\n"
+#~ msgstr "我不喜歡這個 - 您也許應該回答 No\n"
+
+#~ msgid "Are you satisfied with this? [ynq] "
+#~ msgstr "您滿意這個嗎？[ynq] "
+
+#, fuzzy
+#~ msgid "Quitting - nothing changed"
+#~ msgstr "離開 - 沒有任何東西變更"
+
+#~ msgid "Please answer one of y,n,q\n"
+#~ msgstr "請以 y,n,q 之一回答\n"
+
+#~ msgid ""
+#~ "Successfully wrote the new partition table\n"
+#~ "\n"
+#~ msgstr ""
+#~ "成功寫入新的分割表\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
+#~ "to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
+#~ "(See fdisk(8).)\n"
+#~ msgstr ""
+#~ "如果您建立或變更 DOS 分割區(假設是 /dev/foo7)，就得使用 dd(1)\n"
+#~ "將開頭的 512 位元組歸零：dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
+#~ "(參看 fdisk(8).)\n"
+
+#, fuzzy
+#~ msgid "Partition %zd is already defined. Delete it before re-adding it."
+#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+
+#, fuzzy
+#~ msgid "field is too long"
+#~ msgstr "欄位太長"
+
+#, fuzzy
+#~ msgid "%s: '%c' is not allowed"
+#~ msgstr "%s：『%c』未被允許"
+
+#, fuzzy
+#~ msgid "'%c' is not allowed"
+#~ msgstr "『%c』未被允許"
+
+#, fuzzy
+#~ msgid "%s: control characters are not allowed"
+#~ msgstr "%s：控制字元未被允許"
+
+#, fuzzy
+#~ msgid "control characters are not allowed"
+#~ msgstr "控制字元未被允許"
+
+#, fuzzy
+#~ msgid "can only change local entries."
+#~ msgstr "只能變更本地條目。"
+
+#, fuzzy
+#~ msgid "crypt() failed"
+#~ msgstr "意見調查() 失敗"
+
+#, fuzzy
+#~ msgid " %s [options] -u <USER> COMMAND\n"
+#~ msgstr " %s [選項] 命令\n"
+
+#, fuzzy
+#~ msgid " %s [options] [-] [USER [arg]...]\n"
+#~ msgstr " %s [選項] [-] [使用者 [arg]...]\n"
+
+#, fuzzy
+#~ msgid " and do not create a new session\n"
+#~ msgstr " 「%s」)\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -1, --one show only current month (default)\n"
+#~ " -3, --three show previous, current and next month\n"
+#~ " -s, --sunday Sunday as first day of week\n"
+#~ " -m, --monday Monday as first day of week\n"
+#~ " -j, --julian output Julian dates\n"
+#~ " -y, --year show whole current year\n"
+#~ " -V, --version display version information and exit\n"
+#~ " -h, --help display this help text and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -1, --one 只顯示當月 (預設)\n"
+#~ " -3, --three 顯示前一個、目前的和次月\n"
+#~ " -s, --sunday 週日做為先週中某日\n"
+#~ " -m, --monday 週一做為先週中某日\n"
+#~ " -j, --julian 輸出儒略曆約會\n"
+#~ " -y, --year 顯示整個目前的年\n"
+#~ " -V, --version 顯示版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " %1$s [options] LABEL=<label>\n"
+#~ " %1$s [options] UUID=<uuid>\n"
+#~ msgstr ""
+#~ " %1$s [選項] 標貼=<label>\n"
+#~ " %1$s [選項] UUID=<uuid>\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -A, --all disable all built-in filters, print all filesystems\n"
+#~ " -a, --ascii use ASCII chars for tree formatting\n"
+#~ " -c, --canonicalize canonicalize printed paths\n"
+#~ " -D, --df imitate the output of df(1)\n"
+#~ " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
+#~ " -e, --evaluate convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
+#~ " to device names\n"
+#~ " -F, --tab-file <path> alternative file for --fstab, --mtab or --kernel options\n"
+#~ " -f, --first-only print the first found filesystem only\n"
+#~ msgstr ""
+#~ " -A, --all 全部停用內建篩選器，列印所有檔案系統\n"
+#~ " -a, --ascii 使用 ASCII 字元用於樹格式化\n"
+#~ " -c, --canonicalize 正則化列印的路徑\n"
+#~ " -D, --df imitate 輸出的 df (1)\n"
+#~ " -d, --direction <word> 方向的搜尋，『轉寄』或『退一步』\n"
+#~ " -e, --evaluate 轉換標籤 (標貼，UUID，PARTUUID，PARTLABEL)\n"
+#~ " 到裝置名稱\n"
+#~ " -F, --tab-file<路徑> 替代方案檔案用於 --fstab，--mtab 或 --kernel 選項\n"
+#~ " -f, --first-only 列印第一個找到檔案系統只有\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -i, --invert invert the sense of matching\n"
+#~ " -l, --list use list format output\n"
+#~ " -N, --task <tid> use alternative namespace (/proc/<tid>/mountinfo file)\n"
+#~ " -n, --noheadings don't print column headings\n"
+#~ " -u, --notruncate don't truncate text in columns\n"
+#~ msgstr ""
+#~ " -i, --invert 反向 sense 的匹配\n"
+#~ " -l, --list 使用清單格式輸出\n"
+#~ " -N, --task <tid> 使用替代方案命名空間 (/proc/<tid>/mountinfo 檔案)\n"
+#~ " -n, --noheadings 不列印欄標頭\n"
+#~ " -u, --notruncate 不截斷文字在中欄位\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
+#~ " -R, --submounts print all submounts for the matching filesystems\n"
+#~ " -S, --source <string> the device to mount (by name, maj:min, \n"
+#~ " LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
+#~ " -T, --target <string> the mountpoint to use\n"
+#~ msgstr ""
+#~ " -v, --nofsroot 不列印 [/dir] 用於繫結或 btrfs 掛載\n"
+#~ " -R, --submounts 列印所有 submounts 用於匹配檔案系統\n"
+#~ " -S, --source <string> 裝置到掛載 (依名稱，maj：最小，\n"
+#~ " 標貼=, UUID=, PARTUUID=, PARTLABEL=)\n"
+#~ " -T, --target<字串> mountpoint 以使用\n"
+
+#, fuzzy
+#~ msgid " -V, --version Output version information\n"
+#~ msgstr " -V, --version 輸出版本資訊\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -d, --udp use UDP only\n"
+#~ " -i, --id log the process ID too\n"
+#~ " -f, --file <file> log the contents of this file\n"
+#~ " -h, --help display this help text and exit\n"
+#~ msgstr ""
+#~ " -d, --udp 使用 UDP (TCP 是預設)\n"
+#~ " -i, --id 記錄檔處理識別號太\n"
+#~ " -f, --file <file> 記錄檔內容的這個檔案\n"
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -n, --server <name> write to this remote syslog server\n"
+#~ " -P, --port <number> use this UDP port\n"
+#~ " -p, --priority <prio> mark given message with this priority\n"
+#~ " -s, --stderr output message to standard error as well\n"
+#~ msgstr ""
+#~ " -n, --server <name> 寫入這個遠端 syslog 伺服器\n"
+#~ " -P, --port<數字> 使用這個 UDP 通訊埠\n"
+#~ " -p, --priority<prio>標記給定的訊息與這個優先權\n"
+#~ " -s, --stderr 輸出訊息到標準錯誤同樣\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -t, --tag <tag> mark every line with this tag\n"
+#~ " -u, --socket <socket> write to this Unix socket\n"
+#~ " -V, --version output version information and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -t, --tag <tag> 標記每列與這個標籤\n"
+#~ " -u, --socket<通訊端>寫入這個 Unix 通訊端\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -a, --alternative use alternative dictionary\n"
+#~ " -d, --alphanum compare only alphanumeric characters\n"
+#~ " -f, --ignore-case ignore case differences when comparing\n"
+#~ " -t, --terminate <char> define string termination character\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -a, --alternative 使用交替字典\n"
+#~ " -d, --alphanum 比較只有 alpha 數字字元\n"
+#~ " -f, --ignore-case 忽略時比較\n"
+#~ " -t, --terminate <char> 定義字串終止字元\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -f, --file <file> use file as a cookie seed\n"
+#~ " -v, --verbose explain what is being done\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -f, --file <file> 使用檔案做為庫克種子\n"
+#~ " -v, --verbose 解釋什麼正在是已完成\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid " %s [options] pathname [pathname ...]\n"
+#~ msgstr " %s [選項] 路徑名稱 [路徑名稱...]\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "For more information see namei(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 namei(1)。\n"
+
+#, fuzzy
+#~ msgid "Failed to open/create %s: %m\n"
+#~ msgstr "開啟時失敗/建立 %s：%m\n"
+
+#, fuzzy
+#~ msgid "Failed to lock %s: %m\n"
+#~ msgstr "鎖定 %s 時失敗：%m\n"
+
+#~ msgid "Bad number: %s\n"
+#~ msgstr "不當的數字：%s\n"
+
+#, fuzzy
+#~ msgid "Both --pid and --no-pid specified. Ignoring --no-pid.\n"
+#~ msgstr "兩者 --pid 和 --no-pid 指定的。忽略 --no-pid。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "For more information see wipefs(8).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 wipefs(8)。\n"
+
+#~ msgid "warning: error reading %s: %s"
+#~ msgstr "警告：讀取時發生錯誤 %s: %s"
+
+#~ msgid "warning: can't open %s: %s"
+#~ msgstr "警告：無法開啟 %s: %s"
+
+#~ msgid "mount: could not open %s - using %s instead\n"
+#~ msgstr "mount：無法開啟 %s - 使用 %s 做為替代\n"
+
+#~ msgid "can't create lock file %s: %s (use -n flag to override)"
+#~ msgstr "無法建立鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+
+#~ msgid "can't link lock file %s: %s (use -n flag to override)"
+#~ msgstr "無法鏈結鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+
+#~ msgid "can't open lock file %s: %s (use -n flag to override)"
+#~ msgstr "無法開啟鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+
+#~ msgid "Can't lock lock file %s: %s\n"
+#~ msgstr "無法鎖定已鎖定檔案 %s: %s\n"
+
+#~ msgid "can't lock lock file %s: %s"
+#~ msgstr "無法鎖定已鎖定檔案 %s: %s"
+
+#~ msgid ""
+#~ "Cannot create link %s\n"
+#~ "Perhaps there is a stale lock file?\n"
+#~ msgstr ""
+#~ "無法建立鏈結 %s\n"
+#~ "也許有失去時效的鎖定檔案？\n"
+
+#~ msgid "cannot open %s (%s) - mtab not updated"
+#~ msgstr "無法開啟 %s (%s) - mtab 尚未更新"
+
+#~ msgid "error writing %s: %s"
+#~ msgstr "寫入 %s 時發生錯誤：%s"
+
+#, fuzzy
+#~ msgid "%s: cannot fflush changes: %s"
+#~ msgstr "%s：無法 fflush 變更：%s"
+
+#~ msgid "error changing mode of %s: %s\n"
+#~ msgstr "變更 %s 模式時發生錯誤：%s\n"
+
+#~ msgid "error changing owner of %s: %s\n"
+#~ msgstr "變更 %s 的擁有者時發生錯誤：%s\n"
+
+#~ msgid "can't rename %s to %s: %s\n"
+#~ msgstr "無法重新命名 %s 為 %s: %s\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
+#~ " It's possible that information reported by mount(8) is not\n"
+#~ " up to date. For actual information about system mount points\n"
+#~ " check the /proc/mounts file.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "mount：警告：/etc/mtab 不可寫入 (例：唯讀檔案系統)。\n"
+#~ " 由 mount(8) 所報告的資訊有可能不是最新狀況。\n"
+#~ " 想要獲得有關系統掛載點的實際資訊，\n"
+#~ " 請檢查 /proc/mounts 檔案。\n"
+#~ "\n"
+
+#~ msgid "mount: improperly quoted option string '%s'"
+#~ msgstr "mount：選項字串「%s」加入了不適當的引號"
+
+#~ msgid "mount: translated %s '%s' to '%s'\n"
+#~ msgstr "mount：已翻譯 %s「%s」為「%s」\n"
+
+#, fuzzy
+#~ msgid "mount: SELinux *context= options are ignore on remount.\n"
+#~ msgstr "掛載：SELinux * 語境=選項是忽略於 remount。\n"
+
+#~ msgid "mount: according to mtab, %s is already mounted on %s"
+#~ msgstr "mount：根據 mtab，%s 已經掛載到 %s"
+
+#~ msgid "mount: according to mtab, %s is mounted on %s"
+#~ msgstr "mount：根據 mtab，%s 已經掛載到 %s"
+
+#~ msgid "mount: can't open %s for writing: %s"
+#~ msgstr "mount：無法開啟 %s 以用於寫入：%s"
+
+#~ msgid "mount: error writing %s: %s"
+#~ msgstr "mount：寫入時發生錯誤 %s: %s"
+
+#~ msgid "mount: error changing mode of %s: %s"
+#~ msgstr "mount：變更模式時發生錯誤 %s: %s"
+
+#, fuzzy
+#~ msgid "mount: cannot set group id: %m"
+#~ msgstr "掛載：無法設定群組識別號：%m"
+
+#, fuzzy
+#~ msgid "mount: cannot set user id: %m"
+#~ msgstr "掛載：無法設定使用者識別號：%m"
+
+#~ msgid "mount: cannot fork: %s"
+#~ msgstr "mount：無法衍生執行：%s"
+
+#~ msgid "Trying %s\n"
+#~ msgstr "嘗試 %s\n"
+
+#~ msgid "mount: you didn't specify a filesystem type for %s\n"
+#~ msgstr "mount：您並未指定 %s 的檔案系統類型\n"
+
+#~ msgid " I will try all types mentioned in %s or %s\n"
+#~ msgstr " 我將嘗試所有在 %s 或 %s 中提及的類型\n"
+
+#~ msgid " and it looks like this is swapspace\n"
+#~ msgstr " 而它看起來像是個置換空間\n"
+
+#~ msgid " I will try type %s\n"
+#~ msgstr " 我將嘗試類型 %s\n"
+
+#~ msgid "%s looks like swapspace - not mounted"
+#~ msgstr "%s 看起來像是置換空間 - 未掛載"
+
+#~ msgid ""
+#~ "mount: %s: more filesystems detected. This should not happen,\n"
+#~ " use -t <type> to explicitly specify the filesystem type or\n"
+#~ " use wipefs(8) to clean up the device.\n"
+#~ msgstr ""
+#~ "掛載：%s：偵測到多個檔案系統。這不應發生，\n"
+#~ " 使用 -t <type> 以明確指定檔案系統型態或\n"
+#~ " 使用 wipefs(8) 以清理裝置。\n"
+
+#~ msgid "mount: only root can mount %s on %s"
+#~ msgstr "mount：只有 root 可以將 %s 掛載到 %s"
+
+#~ msgid "mount: loop device specified twice"
+#~ msgstr "mount：環路裝置被指定了兩次"
+
+#~ msgid "mount: type specified twice"
+#~ msgstr "mount：類型被指定了兩次"
+
+#~ msgid "mount: skipping the setup of a loop device\n"
+#~ msgstr "mount：跳過環路裝置的設定\n"
+
+#, fuzzy
+#~ msgid "mount: enabling autoclear loopdev flag\n"
+#~ msgstr "掛載：啟用 autoclear loopdev 旗標\n"
+
+#~ msgid "mount: invalid offset '%s' specified"
+#~ msgstr "mount：指定了無效的偏移值「%s」"
+
+#~ msgid "mount: invalid sizelimit '%s' specified"
+#~ msgstr "mount：指定了無效的大小限制「%s」"
+
+#~ msgid "mount: according to mtab %s is already mounted on %s as loop"
+#~ msgstr "mount：根據 mtab %s 已被當做環路而掛載於 %s"
+
+#, fuzzy
+#~ msgid "mount: tailed to initialize loopdev context"
+#~ msgstr "初始化 loopcxt 時失敗"
+
+#, fuzzy
+#~ msgid "mount: failed to use %s device"
+#~ msgstr "%s：無法使用裝置"
+
+#, fuzzy
+#~ msgid "mount: failed to found free loop device"
+#~ msgstr "掛載：無法找到自由迴圈裝置"
+
+#~ msgid "mount: going to use the loop device %s\n"
+#~ msgstr "mount：即將使用環路裝置 %s\n"
+
+#, fuzzy
+#~ msgid "mount: %s: failed to set loopdev attributes"
+#~ msgstr "掛載：%s：無法設定 loopdev 屬性"
+
+#, fuzzy
+#~ msgid "mount: %s: failed setting up loop device: %m"
+#~ msgstr "掛載：%s：失敗的設定迴圈裝置：%m"
+
+#~ msgid "mount: stolen loop=%s ...trying again\n"
+#~ msgstr "mount：丟失環路=%s …再試一次\n"
+
+#~ msgid "mount: stolen loop=%s"
+#~ msgstr "mount：丟失環路=%s"
+
+#~ msgid "mount: setup loop device successfully\n"
+#~ msgstr "mount：成功設定環路裝置\n"
+
+#~ msgid "mount: no %s found - creating it..\n"
+#~ msgstr "mount：找不到 %s - 建立它…\n"
+
+#~ msgid "mount: cannot open %s for setting speed"
+#~ msgstr "mount：無法開啟 %s 以用於設定速度"
+
+#, fuzzy
+#~ msgid "mount: cannot set speed: %m"
+#~ msgstr "掛載：無法設定速度：%m"
+
+#~ msgid "mount: according to mtab, %s is already mounted on %s\n"
+#~ msgstr "mount：根據 mtab，%s 已經掛載到 %s\n"
+
+#~ msgid "mount: warning: %s seems to be mounted read-write.\n"
+#~ msgstr "mount：警告：%s 似乎被掛載為可讀可寫。\n"
+
+#~ msgid "mount: warning: %s seems to be mounted read-only.\n"
+#~ msgstr "mount：警告：%s 似乎被掛載為唯讀。\n"
+
+#~ msgid "mount: I could not determine the filesystem type, and none was specified"
+#~ msgstr "mount：我無法決定檔案系統類型，而它並未被指定"
+
+#~ msgid "mount: you must specify the filesystem type"
+#~ msgstr "mount：您必須指定檔案系統類型"
+
+#~ msgid "mount: mount failed"
+#~ msgstr "mount：掛載時失敗"
+
+#~ msgid "mount: mount point %s is not a directory"
+#~ msgstr "mount：掛載點 %s 並非目錄"
+
+#~ msgid "mount: permission denied"
+#~ msgstr "mount：權限被拒"
+
+#~ msgid "mount: must be superuser to use mount"
+#~ msgstr "mount：必須是系統管理者才能使用掛載"
+
+#~ msgid "mount: proc already mounted"
+#~ msgstr "mount：proc 已被掛載"
+
+#~ msgid "mount: %s already mounted or %s busy"
+#~ msgstr "mount：%s 已被掛載或者 %s 忙碌中"
+
+#~ msgid "mount: mount point %s does not exist"
+#~ msgstr "mount：掛載點 %s 不存在"
+
+#~ msgid "mount: mount point %s is a symbolic link to nowhere"
+#~ msgstr "mount：掛載點 %s 是不明位置的符號連結"
+
+#~ msgid "mount: special device %s does not exist"
+#~ msgstr "mount：特殊裝置 %s 不存在"
+
+#~ msgid ""
+#~ "mount: special device %s does not exist\n"
+#~ " (a path prefix is not a directory)\n"
+#~ msgstr ""
+#~ "mount：特殊裝置 %s 不存在\n"
+#~ " (路徑前綴並非目錄)\n"
+
+#~ msgid ""
+#~ "mount: wrong fs type, bad option, bad superblock on %s,\n"
+#~ " missing codepage or helper program, or other error"
+#~ msgstr ""
+#~ "mount：錯誤檔案系統類型、不當的選項、不當的超區塊於 %s,\n"
+#~ " 缺少編碼頁或輔助程式，或其他錯誤"
+
+#~ msgid ""
+#~ " (could this be the IDE device where you in fact use\n"
+#~ " ide-scsi so that sr0 or sda or so is needed?)"
+#~ msgstr ""
+#~ " (是否可能您使用 IDE 裝置其實是\n"
+#~ " ide-scsi 因而需要 sr0 或 sda 之類裝置?)"
+
+#~ msgid ""
+#~ " (aren't you trying to mount an extended partition,\n"
+#~ " instead of some logical partition inside?)"
+#~ msgstr ""
+#~ " (您是否試著掛載擴充分割區，\n"
+#~ " 而非其中的邏輯分割區 ?)"
+
+#~ msgid ""
+#~ " In some cases useful info is found in syslog - try\n"
+#~ " dmesg | tail or so\n"
+#~ msgstr ""
+#~ " 在某些狀況下，syslog 中可以找到有用的資訊 - 嘗試\n"
+#~ " dmesg | tail 之類命令\n"
+
+#~ msgid "mount: %s: can't read superblock"
+#~ msgstr "mount：%s: 無法讀取超區塊"
+
+#~ msgid "mount: %s: unknown device"
+#~ msgstr "mount：%s: 不明的裝置"
+
+#~ msgid "mount: unknown filesystem type '%s'"
+#~ msgstr "mount：不明的檔案系統類型「%s」"
+
+#~ msgid "mount: probably you meant %s"
+#~ msgstr "mount：您的意思大概是 %s"
+
+#~ msgid "mount: maybe you meant 'iso9660'?"
+#~ msgstr "mount：也許您的意思是「iso9660」？"
+
+#~ msgid "mount: maybe you meant 'vfat'?"
+#~ msgstr "mount：也許您的意思是「vfat」？"
+
+#~ msgid "mount: %s has wrong device number or fs type %s not supported"
+#~ msgstr "mount：%s 有錯誤的裝置編號，或是不支援檔案系統類型 %s"
+
+#~ msgid "mount: %s is not a block device, and stat fails?"
+#~ msgstr "mount：%s 並非一個區塊裝置，而且取得狀態時失敗？"
+
+#~ msgid ""
+#~ "mount: the kernel does not recognize %s as a block device\n"
+#~ " (maybe `modprobe driver'?)"
+#~ msgstr ""
+#~ "mount：內核無法識別 %s 為一個區塊裝置\n"
+#~ " (也許要用「modprobe driver」?)"
+
+#~ msgid "mount: %s is not a block device (maybe try `-o loop'?)"
+#~ msgstr "mount：%s 並非一個區塊裝置 (也許試試「-o loop」?)"
+
+#~ msgid "mount: %s is not a block device"
+#~ msgstr "mount：%s 並非一個區塊裝置"
+
+#~ msgid "mount: %s is not a valid block device"
+#~ msgstr "mount：%s 並非有效的區塊裝置"
+
+#~ msgid "mount: cannot mount %s%s read-only"
+#~ msgstr "mount：無法以唯讀方式掛載 %s%s"
+
+#~ msgid "mount: %s%s is write-protected but explicit `-w' flag given"
+#~ msgstr "mount：%s%s 為防寫，但卻明確給定了「-w」旗標"
+
+#~ msgid "mount: cannot remount %s%s read-write, is write-protected"
+#~ msgstr "mount：無法重新將 %s%s 掛載成可讀可寫，其為防寫的"
+
+#~ msgid "mount: %s%s is write-protected, mounting read-only"
+#~ msgstr "mount：%s%s 為防寫，即將以唯讀方式掛載"
+
+#~ msgid "mount: no medium found on %s"
+#~ msgstr "mount：%s 中找不到任何媒體"
+
+#~ msgid "mount: no type was given - I'll assume nfs because of the colon\n"
+#~ msgstr "mount：沒有給定任何類型 - 我將因為冒號而假設是 nfs\n"
+
+#~ msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
+#~ msgstr "mount：沒有給定任何類型 - 我將因為 // 前綴而假設是 cifs\n"
+
+#, fuzzy
+#~ msgid "mount: ignore %s (unparsable offset= option)\n"
+#~ msgstr "掛載：忽略 %s (unparsable 偏移=選項)\n"
+
+#~ msgid ""
+#~ "Usage: mount -V : print version\n"
+#~ " mount -h : print this help\n"
+#~ " mount : list mounted filesystems\n"
+#~ " mount -l : idem, including volume labels\n"
+#~ "So far the informational part. Next the mounting.\n"
+#~ "The command is `mount [-t fstype] something somewhere'.\n"
+#~ "Details found in /etc/fstab may be omitted.\n"
+#~ " mount -a [-t|-O] ... : mount all stuff from /etc/fstab\n"
+#~ " mount device : mount device at the known place\n"
+#~ " mount directory : mount known device here\n"
+#~ " mount -t type dev dir : ordinary mount command\n"
+#~ "Note that one does not really mount a device, one mounts\n"
+#~ "a filesystem (of the given type) found on the device.\n"
+#~ "One can also mount an already visible directory tree elsewhere:\n"
+#~ " mount --bind olddir newdir\n"
+#~ "or move a subtree:\n"
+#~ " mount --move olddir newdir\n"
+#~ "One can change the type of mount containing the directory dir:\n"
+#~ " mount --make-shared dir\n"
+#~ " mount --make-slave dir\n"
+#~ " mount --make-private dir\n"
+#~ " mount --make-unbindable dir\n"
+#~ "One can change the type of all the mounts in a mount subtree\n"
+#~ "containing the directory dir:\n"
+#~ " mount --make-rshared dir\n"
+#~ " mount --make-rslave dir\n"
+#~ " mount --make-rprivate dir\n"
+#~ " mount --make-runbindable dir\n"
+#~ "A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
+#~ "or by label, using -L label or by uuid, using -U uuid .\n"
+#~ "Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
+#~ "For many more details, say man 8 mount .\n"
+#~ msgstr ""
+#~ "用法：mount -V ：印出版本\n"
+#~ " mount -h ：印出這個說明\n"
+#~ " mount ：列出掛載的檔案系統\n"
+#~ " mount -l ：idem，包含卷冊標籤\n"
+#~ "目前為止是有關資訊部分。下列有關掛載。\n"
+#~ "命令為「mount [-t fstype] something somewhere」。\n"
+#~ "在 /etc/fstab 中找到的細節也許會被省略。\n"
+#~ " mount -a [-t|-O]… ：依據 /etc/fstab 掛載所有項目\n"
+#~ " mount device ：於已知位置掛載裝置\n"
+#~ " mount directory ：在此掛載已知裝置\n"
+#~ " mount -t type dev dir ：標準的掛載命令\n"
+#~ "要注意的是，並非真正地掛載裝置，而是掛載一個\n"
+#~ "在裝置中找到的檔案系統 (給定的類型)。\n"
+#~ "已經可見的目錄樹也可以被掛載到其他地方：\n"
+#~ " mount --bind olddir newdir\n"
+#~ "或是移動子樹：\n"
+#~ " mount --move olddir newdir\n"
+#~ "也可以變更包含目錄 dir 的掛載類型：\n"
+#~ " mount --make-shared dir\n"
+#~ " mount --make-slave dir\n"
+#~ " mount --make-private dir\n"
+#~ " mount --make-unbindable dir\n"
+#~ "包含目錄 dir 的掛載子樹中所有掛載的類型\n"
+#~ "都可以變更：\n"
+#~ " mount --make-rshared dir\n"
+#~ " mount --make-rslave dir\n"
+#~ " mount --make-rprivate dir\n"
+#~ " mount --make-runbindable dir\n"
+#~ "裝置可以由名稱給定，例如 /dev/hda1 或 /dev/cdrom，\n"
+#~ "或是利用 -L label 經由標籤，或是利用 -U uuid 而經由 uuid。\n"
+#~ "其他選項：[-nfFrsvw] [-o options] [-p passwdfd]。\n"
+#~ "要獲得更多細節，就用 man 8 mount。\n"
+
+#~ msgid "mount: only root can do that (effective UID is %u)"
+#~ msgstr "mount：只有 root 可以那樣做 (有效 UID 是 %u)"
+
+#~ msgid "mount: only root can do that"
+#~ msgstr "mount：只有 root 可以那樣做"
+
+#~ msgid "nothing was mounted"
+#~ msgstr "沒有掛載任何東西"
+
+#~ msgid "mount: no such partition found"
+#~ msgstr "mount：找不到此類分割"
+
+#~ msgid "mount: can't find %s in %s or %s"
+#~ msgstr "mount：無法在 %2$s 或 %3$s 中找到 %1$s"
+
+#~ msgid "[mntent]: warning: no final newline at the end of %s\n"
+#~ msgstr "[mntent]：警告：在 %s 的結尾沒有最後的換列字元\n"
+
+#~ msgid "[mntent]: line %d in %s is bad%s\n"
+#~ msgstr "[mntent]：在 %2$s 中的第 %1$d 列是不當的 %3$s\n"
+
+#~ msgid "; rest of file ignored"
+#~ msgstr "；忽略檔案的其餘部分"
+
+#~ msgid "not enough memory"
+#~ msgstr "記憶體不足"
+
+#~ msgid "umount: compiled without support for -f\n"
+#~ msgstr "umount：編譯時未支援 -f\n"
+
+#, fuzzy
+#~ msgid "umount: cannot set group id: %m"
+#~ msgstr "umount：無法設定群組識別號：%m"
+
+#, fuzzy
+#~ msgid "umount: cannot set user id: %m"
+#~ msgstr "umount：無法設定使用者識別號：%m"
+
+#~ msgid "umount: cannot fork: %s"
+#~ msgstr "umount：無法衍生執行：%s"
+
+#~ msgid "umount: %s: invalid block device"
+#~ msgstr "umount：%s: 無效的區塊裝置"
+
+#~ msgid "umount: %s: not mounted"
+#~ msgstr "umount：%s: 未掛載"
+
+#~ msgid "umount: %s: can't write superblock"
+#~ msgstr "umount：%s: 無法寫入超區塊"
+
+#~ msgid ""
+#~ "umount: %s: device is busy.\n"
+#~ " (In some cases useful info about processes that use\n"
+#~ " the device is found by lsof(8) or fuser(1))"
+#~ msgstr ""
+#~ "umount：%s：裝置忙碌中。\n"
+#~ " (在某些情況下關於使用該裝置之行程的\n"
+#~ " 有用資訊，可以藉由 lsof(8) 或 fuser(1) 找到)"
+
+#~ msgid "umount: %s: not found"
+#~ msgstr "umount：%s: 找不到"
+
+#~ msgid "umount: %s: must be superuser to umount"
+#~ msgstr "umount：%s: 必須是系統管理者才能 umount"
+
+#~ msgid "umount: %s: block devices not permitted on fs"
+#~ msgstr "umount：%s: 區塊裝置在檔案系統中不被允許"
+
+#~ msgid "umount: %s: %s"
+#~ msgstr "umount：%s: %s"
+
+#, fuzzy
+#~ msgid "umount: internal error: invalid abs path: %s"
+#~ msgstr "umount：內部錯誤：無效的 abs 路徑：%s"
+
+#, fuzzy
+#~ msgid "umount: failed to chdir to %s: %m"
+#~ msgstr "umount：無法 chdir 到 %s：%m"
+
+#, fuzzy
+#~ msgid "umount: failed to obtain current directory: %m"
+#~ msgstr "umount：無法得到目前的目錄：%m"
+
+#, fuzzy
+#~ msgid "umount: mountpoint moved (%s -> %s)"
+#~ msgstr "umount：mountpoint 移動 (%s -> %s)"
+
+#, fuzzy
+#~ msgid "current directory moved to %s\n"
+#~ msgstr "目前的目錄移動到 %s\n"
+
+#~ msgid "no umount2, trying umount...\n"
+#~ msgstr "沒有 umount2, 試試 umount…\n"
+
+#~ msgid "umount: %s busy - remounted read-only\n"
+#~ msgstr "umount：%s 忙碌中 - 已重新以唯讀掛載\n"
+
+#~ msgid "umount: could not remount %s read-only\n"
+#~ msgstr "umount：無法以唯讀重新掛載 %s\n"
+
+#~ msgid "%s has been unmounted\n"
+#~ msgstr "%s 已卸載\n"
+
+#~ msgid "umount: cannot find list of filesystems to unmount"
+#~ msgstr "umount：找不到可卸載檔案系統的列表"
+
+#~ msgid ""
+#~ "Usage: umount -h | -V\n"
+#~ " umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
+#~ " umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
+#~ msgstr ""
+#~ "用法：umount -h | -V\n"
+#~ " umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
+#~ " umount [-d] [-f] [-r] [-n] [-v] 特殊 | 節點…\n"
+
+#, fuzzy
+#~ msgid "failed to parse 'offset=%s' options\n"
+#~ msgstr "剖析『偏移時失敗=%s』選項\n"
+
+#~ msgid "device %s is associated with %s\n"
+#~ msgstr "裝置 %s 與 %s 有所關聯\n"
+
+#~ msgid "Cannot unmount \"\"\n"
+#~ msgstr "無法卸載「」\n"
+
+#~ msgid "umount: confused when analyzing mtab"
+#~ msgstr "umount：分析 mtab 時感到困惑"
+
+#~ msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
+#~ msgstr "umount：無法卸載 %s -- %s 被掛載於相同點之上"
+
+#~ msgid "Could not find %s in mtab\n"
+#~ msgstr "在 mtab 中找不到 %s\n"
+
+#, fuzzy
+#~ msgid "umount: warning: %s is associated with more than one loop device\n"
+#~ msgstr "umount：警告：%s 被關聯的與超過一個迴圈裝置\n"
+
+#~ msgid "umount: %s is not mounted (according to mtab)"
+#~ msgstr "umount：%s 未掛載 (根據 mtab)"
+
+#~ msgid "umount: it seems %s is mounted multiple times"
+#~ msgstr "umount：%s 似乎已被多次掛載"
+
+#~ msgid "umount: %s is not in the fstab (and you are not root)"
+#~ msgstr "umount：%s 並不在 fstab 之中(而且您不是 root)"
+
+#~ msgid "umount: %s mount disagrees with the fstab"
+#~ msgstr "umount：%s 掛載與 fstab 不相符"
+
+#~ msgid "umount: only %s can unmount %s from %s"
+#~ msgstr "umount：只有 %1$s 可以從 %3$s 卸載 %2$s"
+
+#~ msgid "umount: only root can do that"
+#~ msgstr "umount：只有 root 可以那樣做"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "%1$s - sets or gets process io scheduling class and priority.\n"
+#~ "\n"
+#~ "Usage:\n"
+#~ " %1$s [OPTION] -p PID [PID...]\n"
+#~ " %1$s [OPTION] COMMAND\n"
+#~ "\n"
+#~ "Options:\n"
+#~ " -c, --class <class> scheduling class name or number\n"
+#~ " 0: none, 1: realtime, 2: best-effort, 3: idle\n"
+#~ " -n, --classdata <num> scheduling class data\n"
+#~ " 0-7 for realtime and best-effort classes\n"
+#~ " -p, --pid=PID view or modify already running process\n"
+#~ " -t, --ignore ignore failures\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "%1$s - 集合或提取處理 io 排程類別和優先權。\n"
+#~ "\n"
+#~ "用法：\n"
+#~ " %1$s [選項] -p PID [PID...]\n"
+#~ " %1$s [選項] 命令\n"
+#~ "\n"
+#~ "選項：\n"
+#~ " -c, --class <class> 排程類別名稱或數字\n"
+#~ " 0:無，1:realtime，2:盡力，3:閒置\n"
+#~ " -n, --classdata<num>排程類別資料\n"
+#~ " 0-7 用於 realtime 和盡力類別\n"
+#~ " -p, --pid=PID 檢視或修改已經執行中處理\n"
+#~ " -t, --ignore 忽略失敗\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "For more information see taskset(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 taskset(1)。\n"
+
+#, fuzzy
+#~ msgid " %s [options] <tty> [...]\n"
+#~ msgstr " %s [選項] <tty> [...]\n"
+
+#, fuzzy
+#~ msgid " -s, --set-threshold <num> set interruption threshold value\n"
+#~ msgstr " -s, --set-threshold <num> 設定插斷臨界值\n"
+
+#, fuzzy
+#~ msgid " -S, --set-default-threshold <num> set default threshold value\n"
+#~ msgstr " -S, --set-default-threshold <num> 設定預設臨界值\n"
+
+#, fuzzy
+#~ msgid " -t, --set-flush <num> set flush timeout to value\n"
+#~ msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#, fuzzy
+#~ msgid " -T, --set-default-flush <num> set the default flush timeout to value\n"
+#~ msgstr " -T, --set-default-flush <num> 設定預設清理逾時到值\n"
+
+#, fuzzy
+#~ msgid " -i, --interval <seconds> gather statistics every <seconds> interval\n"
+#~ msgstr " -i, --interval <seconds> 積聚統計每<秒>間隔\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
+#~ "and the maximum transfer rate in characters/second was %f"
+#~ msgstr ""
+#~ "檔案 %s，用於臨界值 %lu，最大值字元在中 fifo 是 %d，\n"
+#~ "和最大值轉送速率在中字元/秒是 %f"
+
+#, fuzzy
+#~ msgid ""
+#~ "File %s, For threshold value %lu and timeout value %lu, Maximum characters in fifo were %d,\n"
+#~ "and the maximum transfer rate in characters/second was %f"
+#~ msgstr ""
+#~ "檔案 %s，用於臨界值 %lu 和逾時值 %lu，最大值字元在中 fifo 是 %d，\n"
+#~ "和最大值轉送速率在中字元/秒是 %f"
+
+#, fuzzy
+#~ msgid "cannot issue CYGETMON on %s"
+#~ msgstr "無法議題 CYGETMON 於 %s"
+
+#, fuzzy
+#~ msgid "cannot get threshold for %s"
+#~ msgstr "無法提取臨界值用於 %s"
+
+#, fuzzy
+#~ msgid "cannot get timeout for %s"
+#~ msgstr "無法提取逾時用於 %s"
+
+#~ msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#~ msgstr "%s：%lu 間隔值，%lu/%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大值，%lu 當前值\n"
+
+#~ msgid " %f int/sec; %f rec, %f send (char/sec)\n"
+#~ msgstr " %f 間隔/秒；%f 記錄，%f 發送 (字元/秒)\n"
+
+#~ msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#~ msgstr "%s：%lu 間隔值，%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大值，%lu 當前值\n"
+
+#~ msgid " %f int/sec; %f rec (char/sec)\n"
+#~ msgstr " %f 間隔/秒；%f 記錄 (字元/秒)\n"
+
+#, fuzzy
+#~ msgid "Invalid interval value"
+#~ msgstr "無效的間隔值"
+
+#, fuzzy
+#~ msgid "Invalid interval value: %d"
+#~ msgstr "無效的間隔值：%d"
+
+#, fuzzy
+#~ msgid "Invalid set value: %d"
+#~ msgstr "無效的設定值：%d"
+
+#, fuzzy
+#~ msgid "Invalid default value"
+#~ msgstr "無效的預設值"
+
+#, fuzzy
+#~ msgid "Invalid default value: %d"
+#~ msgstr "無效的預設值：%d"
+
+#, fuzzy
+#~ msgid "Invalid set time value"
+#~ msgstr "無效的設定時間值"
+
+#, fuzzy
+#~ msgid "Invalid set time value: %d"
+#~ msgstr "無效的設定時間值：%d"
+
+#, fuzzy
+#~ msgid "Invalid default time value"
+#~ msgstr "無效的預設時間值"
+
+#, fuzzy
+#~ msgid "Invalid default time value: %d"
+#~ msgstr "無效的預設時間值：%d"
+
+#, fuzzy
+#~ msgid "cannot set %s to threshold %d"
+#~ msgstr "無法設定 %s 到臨界值 %d"
+
+#, fuzzy
+#~ msgid "cannot set %s to time threshold %d"
+#~ msgstr "無法設定 %s 到時間臨界值 %d"
+
+#~ msgid "%s: %ld current threshold and %ld current timeout\n"
+#~ msgstr "%s：%ld 為目前臨界值以及 %ld 為目前逾時值\n"
+
+#~ msgid "%s: %ld default threshold and %ld default timeout\n"
+#~ msgstr "%s：%ld 為預設臨界值以及 %ld 為預設逾時值\n"
+
+#, fuzzy
+#~ msgid "--notime can't be used together with --ctime or --reltime"
+#~ msgstr "--notime 無法使用的一起與 --ctime 或 --reltime"
+
+#, fuzzy
+#~ msgid "%s: is removable device"
+#~ msgstr "%s：是可移除的裝置"
+
+#, fuzzy
+#~ msgid "%s: connected by hotplug subsystem: %s"
+#~ msgstr "%s：連線由 hotplug 子系統：%s"
+
+#, fuzzy
+#~ msgid ""
+#~ " -n, --keep-size don't modify the length of the file\n"
+#~ " -p, --punch-hole punch holes in the file\n"
+#~ " -o, --offset <num> offset of the allocation, in bytes\n"
+#~ " -l, --length <num> length of the allocation, in bytes\n"
+#~ msgstr ""
+#~ " -n, --keep-size 不修改長度的檔案\n"
+#~ " -p, --punch-hole 打孔漏洞在中檔案\n"
+#~ " -o, --offset <num> 偏移的配額，在中位元組\n"
+#~ " -l, --length<num> 長度的配額，在中位元組\n"
+
+#, fuzzy
+#~ msgid "timeout cannot be zero"
+#~ msgstr "逾時無法零"
+
+#, fuzzy
+#~ msgid ""
+#~ " -o, --offset <num> offset in bytes to discard from\n"
+#~ " -l, --length <num> length of bytes to discard from the offset\n"
+#~ " -m, --minimum <num> minimum extent length to discard\n"
+#~ " -v, --verbose print number of discarded bytes\n"
+#~ msgstr ""
+#~ " -o, --offset <num> 偏移在中位元組到捨棄從\n"
+#~ " -l, --length<num> 長度的位元組到捨棄從偏移\n"
+#~ " -m, --minimum<num>最小延伸長度到捨棄\n"
+#~ " -v, --verbose 列印捨棄的位元組數量\n"
+
+#~ msgid ""
+#~ "Time elapsed since reference time has been %.6f seconds.\n"
+#~ "Delaying further to reach the new time.\n"
+#~ msgstr ""
+#~ "從參考時間起算已經過 %.6f 秒。\n"
+#~ "多延遲一點以達到新的時間。\n"
+
+#~ msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
+#~ msgstr "需要插入 %d 秒並回溯參考 %.6f 秒之前的時間\n"
+
+#~ msgid "Waiting in loop for time from KDGHWCLK to change\n"
+#~ msgstr "循環等待自 KDGHWCLK 變更起的時間\n"
+
+#~ msgid "KDGHWCLK ioctl to read time failed"
+#~ msgstr "KDGHWCLK ioctl 讀取時間失敗"
+
+#~ msgid "KDGHWCLK ioctl to read time failed in loop"
+#~ msgstr "KDGHWCLK ioctl 讀取時間於循環中失敗"
+
+#~ msgid "ioctl() failed to read time from %s"
+#~ msgstr "ioctl() 從 %s 讀取時間失敗"
+
+#~ msgid "ioctl KDSHWCLK failed"
+#~ msgstr "ioctl KDSHWCLK 失敗"
+
+#~ msgid "Can't open /dev/tty1 or /dev/vc/1"
+#~ msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
+
+#~ msgid "KDGHWCLK ioctl failed"
+#~ msgstr "KDGHWCLK ioctl 失敗"
+
+#, fuzzy
#~ msgid ""
-#~ "%s: Could not find any loop device. Maybe this kernel does not know\n"
-#~ " about the loop device? (If so, recompile or `modprobe loop'.)"
+#~ " -a, --all list all used devices\n"
+#~ " -d, --detach <loopdev> [...] detach one or more devices\n"
+#~ " -D, --detach-all detach all used devices\n"
+#~ " -f, --find find first unused device\n"
+#~ " -c, --set-capacity <loopdev> resize device\n"
+#~ " -j, --associated <file> list all devices associated with <file>\n"
#~ msgstr ""
-#~ "%s：找不到任何環路裝置。也許這個內核不認識\n"
-#~ " 什麼是環路裝置？(如果是這樣，請重新編譯或執行「modprobe loop」。)"
+#~ " -a, --all 列出所有使用的裝置\n"
+#~ " -d, --detach <loopdev> [...] 卸離一或多個裝置\n"
+#~ " -D, --detach-all 卸離所有使用的裝置\n"
+#~ " -f, --find 尋找先未使用的裝置\n"
+#~ " -c, --set-capacity<loopdev> 調整大小裝置\n"
+#~ " -j, --associated<檔案> 列出所有裝置關聯的與<檔案>\n"
-#~ msgid "Out of memory while reading passphrase"
-#~ msgstr "讀取密語時記憶體不足"
+#, fuzzy
+#~ msgid "find unused loop device failed"
+#~ msgstr "尋找未使用的迴圈裝置失敗"
-#~ msgid "warning: %s is already associated with %s\n"
-#~ msgstr "警告：%s 已經和 %s 相關聯\n"
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "For more details see lscpu(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "以獲得更多細節參看 lscpu (1)。\n"
-#~ msgid "warning: %s: is write-protected, using read-only.\n"
-#~ msgstr "警告：%s：為防寫，使用唯讀。\n"
+#, fuzzy
+#~ msgid " %s [options] <program> [args...]\n"
+#~ msgstr " %s [選項] <program> [引數...]\n"
-#~ msgid "ioctl LOOP_SET_FD failed: %s\n"
-#~ msgstr "ioctl LOOP_SET_FD 失敗：%s\n"
+#, fuzzy
+#~ msgid ""
+#~ " -g, --pgrp <id> interpret argument as process group ID\n"
+#~ " -n, --priority <num> specify the nice increment value\n"
+#~ " -p, --pid <id> interpret argument as process ID (default)\n"
+#~ " -u, --user <name|id> interpret argument as username or user ID\n"
+#~ " -h, --help display help text and exit\n"
+#~ " -V, --version display version information and exit\n"
+#~ msgstr ""
+#~ " -g, --pgrp <id> 解譯做為處理群組識別號\n"
+#~ " -h, --help 列印說明\n"
+#~ " -n, --priority<num> 設定好遞增值\n"
+#~ " -p, --pid<識別號> 強制為解譯的做為處理識別號\n"
+#~ " -u, --user<名稱|識別號> 解譯做為使用者名稱或使用者識別號\n"
+#~ " -v, --version 印出版本\n"
-#~ msgid "set_loop(%s,%s,%llu,%llu): success\n"
-#~ msgstr "set_loop(%s,%s,%llu,%llu)：成功\n"
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "For more information see renice(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 renice (1)。\n"
-#~ msgid "del_loop(%s): success\n"
-#~ msgstr "del_loop(%s)：成功\n"
+#, fuzzy
+#~ msgid " %s%s [options] [program [program arguments]]\n"
+#~ msgstr " %s%s [選項] [程式 [程式引數]]\n"
-#~ msgid "loop: can't delete device %s: %s\n"
-#~ msgstr "loop：無法刪除裝置 %s: %s\n"
+#, fuzzy
+#~ msgid ""
+#~ " -a, --all enable all swaps from /etc/fstab\n"
+#~ " -d, --discard discard freed pages before they are reused\n"
+#~ " -e, --ifexists silently skip devices that do not exist\n"
+#~ " -f, --fixpgsz reinitialize the swap space if necessary\n"
+#~ " -p, --priority <prio> specify the priority of the swap device\n"
+#~ " -s, --summary display summary about used swap devices\n"
+#~ " --show[=<columns>] display summary in definable table\n"
+#~ " --noheadings don't print headings, use with --show\n"
+#~ " --raw use the raw output format, use with --show\n"
+#~ " --bytes display swap size in bytes in --show output\n"
+#~ " -v, --verbose verbose mode\n"
+#~ msgstr ""
+#~ " -a, --all 全部啟用交換從/etc/fstab\n"
+#~ " -d, --discard 捨棄自由的頁面之前它們被重新使用\n"
+#~ " -e, --ifexists 寂靜的跳過裝置該不存在\n"
+#~ " -f, --fixpgsz 重新初始化交換空間如果必要的話\n"
+#~ " -p, --priority <prio> 指定優先權的交換裝置\n"
+#~ " -s, --summary 顯示概要關於使用的交換裝置\n"
+#~ " --show [=<欄位>] 顯示概要在中 definable 表格\n"
+#~ " --noheadings 不列印標頭，使用與 --show\n"
+#~ " --raw 使用原始輸出格式，使用與 --show\n"
+#~ " --bytes 顯示交換大小在中位元組在中 --show 輸出\n"
+#~ " -v, --verbose 詳細模式\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -v, --verbose explain what is being done\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help output help screen and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -v, --verbose 解釋什麼正在是已完成\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 輸出說明畫面然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid " -term <terminal_name>\n"
+#~ msgstr " [ -term terminal_name]\n"
+
+#, fuzzy
+#~ msgid " -reset\n"
+#~ msgstr " [ -reset ]\n"
+
+#, fuzzy
+#~ msgid " -initialize\n"
+#~ msgstr " [ -initialize ]\n"
+
+#, fuzzy
+#~ msgid " -cursor <on|off>\n"
+#~ msgstr " [ -cursor [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -repeat <on|off>\n"
+#~ msgstr " [ -repeat [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -appcursorkeys <on|off>\n"
+#~ msgstr " [ -appcursorkeys [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -linewrap <on|off>\n"
+#~ msgstr " [ -linewrap [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -default\n"
+#~ msgstr " [ -default ]\n"
+
+#, fuzzy
+#~ msgid " -inversescreen <on|off>\n"
+#~ msgstr " [ -inversescreen [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -bold <on|off>\n"
+#~ msgstr " [ -bold [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -blink <on|off>\n"
+#~ msgstr " [ -blink [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -reverse <on|off>\n"
+#~ msgstr " [ -reverse [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -underline <on|off>\n"
+#~ msgstr " [ -underline [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -store\n"
+#~ msgstr " [ -store ]\n"
+
+#, fuzzy
+#~ msgid " -clear <all|rest>\n"
+#~ msgstr " [ -clear [all|rest] ]\n"
+
+#, fuzzy
+#~ msgid " -tabs <tab1 tab2 tab3 ...> (tabn = 1-160)\n"
+#~ msgstr " [ -tabs [ tab1 tab2 tab3 … ] ] (tabn = 1-160)\n"
+
+#, fuzzy
+#~ msgid " -clrtabs <tab1 tab2 tab3 ...> (tabn = 1-160)\n"
+#~ msgstr " [ -clrtabs [ tab1 tab2 tab3 … ] ] (tabn = 1-160)\n"
+
+#, fuzzy
+#~ msgid " -regtabs <1-160>\n"
+#~ msgstr " [ -regtabs [1-160] ]\n"
+
+#, fuzzy
+#~ msgid " -blank <0-60|force|poke>\n"
+#~ msgstr " [ -blank [0-60|force|poke] ]\n"
+
+#, fuzzy
+#~ msgid " -dump <1-NR_CONSOLES>\n"
+#~ msgstr " [ -dump [1-NR_CONSOLES] ]\n"
+
+#, fuzzy
+#~ msgid " -append <1-NR_CONSOLES>\n"
+#~ msgstr " [ -append [1-NR_CONSOLES] ]\n"
+
+#, fuzzy
+#~ msgid " -file dumpfilename\n"
+#~ msgstr " -l 列出所有檔名\n"
+
+#, fuzzy
+#~ msgid " -msg <on|off>\n"
+#~ msgstr " [ -msg [on|off] ]\n"
+
+#, fuzzy
+#~ msgid " -msglevel <0-8>\n"
+#~ msgstr " [ -msglevel [0-8] ]\n"
+
+#, fuzzy
+#~ msgid " -powerdown <0-60>\n"
+#~ msgstr " [ -powerdown [0-60] ]\n"
+
+#, fuzzy
+#~ msgid " -blength <0-2000>\n"
+#~ msgstr " [ -blength [0-2000] ]\n"
+
+#, fuzzy
+#~ msgid " -bfreq freqnumber\n"
+#~ msgstr " [ -bfreq 頻率數 ]\n"
+
+#, fuzzy
+#~ msgid "Error writing screendump"
+#~ msgstr "寫入 screendump 時發生錯誤"
+
+#, fuzzy
+#~ msgid "Couldn't read neither /dev/vcsa0 nor /dev/vcsa"
+#~ msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
+
+#, fuzzy
+#~ msgid ""
+#~ " -n, --nobanner do not print banner, works only for root\n"
+#~ " -t, --timeout <timeout> write timeout in seconds\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -n, --nobanner 不列印橫幅，作用只有用於根\n"
+#~ " -t, --timeout <timeout> 寫入逾時的秒數\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %s [options] [file ...]\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] [檔案...]\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -, --no-underlining suppress all underlining\n"
+#~ " -2, --half-lines print all half-lines\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -, --no-underlining 抑制所有底線\n"
+#~ " -2, --half-lines 列印所有 half-lines\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "calling hexdump as od has been deprecated in favour to GNU coreutils od."
+#~ msgstr "呼叫 hexdump 做為 od 已被不宜用在中 favour 到 GNU coreutils od。"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %s [options] file...\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] 檔案…\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -b one-byte octal display\n"
+#~ " -c one-byte character display\n"
+#~ " -C canonical hex+ASCII display\n"
+#~ " -d two-byte decimal display\n"
+#~ " -o two-byte octal display\n"
+#~ " -x two-byte hexadecimal display\n"
+#~ " -e format format string to be used for displaying data\n"
+#~ " -f format_file file that contains format strings\n"
+#~ " -n length interpret only length bytes of input\n"
+#~ " -s offset skip offset bytes from the beginning\n"
+#~ " -v display without squeezing similar lines\n"
+#~ " -V output version information and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -b one-byte 八進位顯示\n"
+#~ " -c one-byte 字元顯示\n"
+#~ " -C 權威的十六進位+ASCII 顯示\n"
+#~ " -d two-byte 十進位顯示\n"
+#~ " -o two-byte 八進位顯示\n"
+#~ " -x two-byte 十六進位顯示\n"
+#~ " -e 格式 格式字串為用於顯示資料\n"
+#~ " -f formatfile 檔案該含有格式字串(_F)\n"
+#~ " -n 長度 解譯只有長度位元組的輸入\n"
+#~ " -s 偏移 跳過偏移位元組從起始部分\n"
+#~ " -v 顯示而無需 squeezing 類似的列\n"
+#~ " -V 輸出版本資訊然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Usage: %s [options] file...\n"
+#~ "\n"
+#~ msgstr ""
+#~ "用法：%s [選項] 檔案…\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Options:\n"
+#~ " -d display help instead of ring bell\n"
+#~ " -f count logical, rather than screen lines\n"
+#~ " -l suppress pause after form feed\n"
+#~ " -p do not scroll, clean screen and display text\n"
+#~ " -c do not scroll, display text and clean line ends\n"
+#~ " -u suppress underlining\n"
+#~ " -s squeeze multiple blank lines into one\n"
+#~ " -NUM specify the number of lines per screenful\n"
+#~ " +NUM display file beginning from line number NUM\n"
+#~ " +/STRING display file beginning from search string match\n"
+#~ " -V output version information and exit\n"
+#~ msgstr ""
+#~ "選項：\n"
+#~ " -d 顯示說明以代替環響鈴\n"
+#~ " -f 計數邏輯的，而非螢幕列\n"
+#~ " -l 抑制暫停之後表格饋送\n"
+#~ " -p 抑制捲動，清除螢幕和顯示文字\n"
+#~ " -c 抑制捲動，顯示文字和清除列結束\n"
+#~ " -u 抑制底線\n"
+#~ " -s squeeze 多重空列進入一個\n"
+#~ " -NUM 指定列號的各全螢幕\n"
+#~ " +NUM 顯示檔案起始部分從列號 NUM\n"
+#~ " +/字串 顯示檔案起始部分從搜尋字串匹配\n"
+#~ " -V 輸出版本資訊然後離開\n"
+
+#~ msgid "...back 1 page"
+#~ msgstr "…倒退 1 頁"
+
+#~ msgid "...skipping one line"
+#~ msgstr "…跳過 1 列"
+
+#~ msgid "line too long"
+#~ msgstr "列的長度過長"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "For more information see rev(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 rev (1)。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %s [option] file\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] 檔案\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -n, --lines NUMBER output the last NUMBER lines\n"
+#~ " -NUMBER same as `-n NUMBER'\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -n, --lines 數字 輸出最後一筆數字列\n"
+#~ " -NUMBER 如同『-n 數字』\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -A check all filesystems\n"
+#~ " -R skip root filesystem; useful only with `-A'\n"
+#~ " -M do not check mounted filesystems\n"
+#~ " -t <type> specify filesystem types to be checked;\n"
+#~ " type is allowed to be comma-separated list\n"
+#~ " -P check filesystems in parallel, including root\n"
+#~ " -r report statistics for each device fsck\n"
+#~ " -s serialize fsck operations\n"
+#~ " -l lock the device using flock()\n"
+#~ " -N do not execute, just show what would be done\n"
+#~ " -T do not show the title on startup\n"
+#~ " -C <fd> display progress bar; file descriptor is for GUIs\n"
+#~ " -V explain what is being done\n"
+#~ " -? display this help and exit\n"
+#~ "\n"
+#~ "See fsck.* commands for fs-options."
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -A 檢查所有檔案系統\n"
+#~ " -R 跳過根檔案系統；有用只有與『-A』\n"
+#~ " -M 不檢查掛載的檔案系統\n"
+#~ " -t <type> 指定檔案系統類型為已勾選；\n"
+#~ " 型態被允許為以逗號分隔的清單\n"
+#~ " -P 檢查檔案系統在中平行，包含根\n"
+#~ " -r 報告統計用於每個裝置 fsck\n"
+#~ " -s 序列化 fsck 計算\n"
+#~ " -l 鎖定裝置使用 flock()\n"
+#~ " -N 不執行，僅顯示什麼會是已完成\n"
+#~ " -T 不顯示標題於啟動\n"
+#~ " -C<fd> 顯示進度桿；檔案描述符號是用於圖形使用者介面\n"
+#~ " -V 解釋什麼正在是已完成\n"
+#~ " -? 顯示這份說明然後離開\n"
+#~ "\n"
+#~ "參看 fsck.* 命令用於 fs-options。"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -d, --divisor=NUM divide bytes NUM\n"
+#~ " -x, --sectors show sector count and size\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -H, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -d, --divisor=NUM 除位元組 NUM\n"
+#~ " -x, --sectors 顯示磁區計數和大小\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -H, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -t, --type=TYPE file system type, when undefined ext2 is used\n"
+#~ " fs-options parameters to real file system builder\n"
+#~ " device path to a device\n"
+#~ " size number of blocks on the device\n"
+#~ " -V, --verbose explain what is done\n"
+#~ " defining -V more than once will cause a dry-run\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -V as version must be only option\n"
+#~ " -h, --help display this help and exit\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -t, --type=型態 檔案系統類型，時未定義 ext2 被使用\n"
+#~ " fs-options 參數到真實檔案系統產生器\n"
+#~ " 裝置 路徑到裝置\n"
+#~ " 大小 區塊數量在之上裝置\n"
+#~ " -V, --verbose 解釋什麼是已完成\n"
+#~ " 定義 -V 一次以上將造成 dry-run\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -V 做為版本必須是只有選項\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
-#~ msgid "This mount was compiled without loop support. Please recompile.\n"
-#~ msgstr "這個 mount 程式編譯時不具環路支援。請重新編譯。\n"
+#~ msgid "mkfs (%s)\n"
+#~ msgstr "mkfs (%s)\n"
-#~ msgid "Loop device is %s\n"
-#~ msgstr "環路裝置是 %s\n"
+#~ msgid "strtol error: number of blocks not specified"
+#~ msgstr "strtol 錯誤：區塊數量尚未指定"
-#~ msgid "stolen loop=%s...trying again\n"
-#~ msgstr "ä¸\9f失ç\9a\84ç\92°è·¯=%s...å\86\8d試ä¸\80次\n"
+#~ msgid "one bad page\n"
+#~ msgstr "ä¸\80å\80\8bä¸\8dè\89¯é \81é\9d¢\n"
-#~ msgid "%s: %s: device is busy"
-#~ msgstr "%s：%s：裝置忙碌中"
+#~ msgid " on whole disk. "
+#~ msgstr " 於整個磁碟。"
-#~ msgid "No loop support was available at compile time. Please recompile.\n"
-#~ msgstr "編譯時期就已不支援環路。請重新編譯。\n"
+#, fuzzy
+#~ msgid "does not support swapspace version %d."
+#~ msgstr "不支援 swapspace 版本 %d。"
#, fuzzy
#~ msgid ""
+#~ " -a, --add add specified partitions or all of them\n"
+#~ " -d, --delete delete specified partitions or all of them\n"
+#~ " -l, --list list partitions (DEPRECATED)\n"
+#~ " -s, --show list partitions\n"
#~ "\n"
-#~ "For more information see partx(8).\n"
+#~ " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+#~ " -g, --noheadings don't print headings for --show\n"
+#~ " -n, --nr <n:m> specify the range of partitions (e.g. --nr 2:4)\n"
+#~ " -o, --output <type> define which output columns to use\n"
+#~ " -P, --pairs use key=\"value\" output format\n"
+#~ " -r, --raw use raw output format\n"
+#~ " -t, --type <type> specify the partition type (dos, bsd, solaris, etc.)\n"
+#~ " -v, --verbose verbose mode\n"
#~ msgstr ""
+#~ " -a, --add 加入指定的分割區或所有的它們\n"
+#~ " -d, --delete 刪除指定的分割區或所有的它們\n"
+#~ " -l, --list 清單分割區 (不宜用)\n"
+#~ " -s, --show 清單分割區\n"
#~ "\n"
-#~ "要獲得更多資訊請參看 setarch(8)。\n"
+#~ " -b, --bytes 列印大小在中位元組而非在中人類 readable 格式\n"
+#~ " -g, --noheadings 不列印標頭用於 --show\n"
+#~ " -n, --nr <n:m> 指定範圍的分割區(例如：--nr 2:4)\n"
+#~ " -o, --output<型態> 定義該項輸出欄位以使用\n"
+#~ " -P, --pairs 使用鍵=\"值\"輸出格式\n"
+#~ " -r, --raw 使用原始輸出格式\n"
+#~ " -t, --type<型態> 指定分割區類型 (DOS、bsd、solaris，etc.)\n"
+#~ " -v, --verbose 詳細模式\n"
+
+#~ msgid "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
+#~ msgstr "警告 !! 偵測到不受支援的 GPT (GUID 分割表)。使用 GNU Parted。"
#~ msgid ""
-#~ "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T "
-#~ "value]) [-g|-G] file [file...]\n"
+#~ "\n"
+#~ "\tThere is a valid AIX label on this disk.\n"
+#~ "\tUnfortunately Linux cannot handle these\n"
+#~ "\tdisks at the moment. Nevertheless some\n"
+#~ "\tadvice:\n"
+#~ "\t1. fdisk will destroy its contents on write.\n"
+#~ "\t2. Be sure that this disk is NOT a still vital\n"
+#~ "\t part of a volume group. (Otherwise you may\n"
+#~ "\t erase the other disks as well, if unmirrored.)\n"
+#~ "\t3. Before deleting this physical volume be sure\n"
+#~ "\t to remove the disk logically from your AIX\n"
+#~ "\t machine. (Otherwise you become an AIXpert)."
#~ msgstr ""
-#~ "用法：%s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T "
-#~ "value]) [-g|-G] file [file...]\n"
+#~ "\n"
+#~ "\t這個磁碟具備有效的 AIX 標籤。\n"
+#~ "\t不幸地 Linux 目前無法處理這些\n"
+#~ "\t磁碟。 即使如此還是有一些\n"
+#~ "\t忠告：\n"
+#~ "\t1.fdisk 於寫入時將銷毀它的內容。\n"
+#~ "\t2.請確認這個磁碟並非仍然活躍\n"
+#~ "\t 的卷冊群之一部分。(否則您也許會\n"
+#~ "\t 同時清除了其他磁碟，如果未被鏡射的話)\n"
+#~ "\t3.刪除這個實體卷冊之前請確定，\n"
+#~ "\t 邏輯上從您的 AIX 機器\n"
+#~ "\t 移除磁碟。(除非您成為 AIX 專家)。"
-#~ msgid "Can't open %s: %s\n"
-#~ msgstr "無法開啟 %s: %s\n"
+#~ msgid ""
+#~ "\tSorry - this fdisk cannot handle AIX disk labels.\n"
+#~ "\tIf you want to add DOS-type partitions, create\n"
+#~ "\ta new empty DOS partition table first. (Use o.)\n"
+#~ "\tWARNING: This will destroy the present disk contents.\n"
+#~ msgstr ""
+#~ "\t抱歉 - fdisk 無法處理 AIX 磁碟標籤。\n"
+#~ "\t如果您要加入 DOS 類型分割區，請先建立\n"
+#~ "\t新的空 DOS 分割表。(使用 o.)\n"
+#~ "\t警告：這將銷毀現有磁碟內容。\n"
-#, fuzzy
#~ msgid ""
-#~ " -s --shared Get a shared lock\n"
-#~ " -x --exclusive Get an exclusive lock\n"
-#~ " -u --unlock Remove a lock\n"
-#~ " -n --nonblock Fail rather than wait\n"
-#~ " -w --timeout Wait for a limited amount of time\n"
-#~ " -o --close Close file descriptor before running command\n"
-#~ " -c --command Run a single command string through the shell\n"
-#~ " -h --help Display this text\n"
-#~ " -V --version Display version\n"
#~ "\n"
+#~ "BSD label for device: %s\n"
#~ msgstr ""
-#~ "用法：%1$s [-sxun ][-w #] fd#\n"
-#~ " %1$s [-sxon ][-w #] 檔案 [-c] 命令…\n"
-#~ " %1$s [-sxon ][-w #] 目錄 [-c] 命令…\n"
-#~ " -s --shared 取得共享的鎖定\n"
-#~ " -x --exclusive 取得專用的鎖定\n"
-#~ " -u --unlock 移除鎖定\n"
-#~ " -n --nonblock 失敗而不是等待\n"
-#~ " -w --timeout 等待一段受限制的時間\n"
-#~ " -o --close 執行命令之前關閉檔案描述符號\n"
-#~ " -c --command 透過命令殼執行單一命令字串\n"
-#~ " -h --help 顯示這個說明\n"
-#~ " -V --version 顯示版本\n"
-
-#~ msgid "%s: cannot open lock file %s: %s\n"
-#~ msgstr "%s：無法開啟鎖定檔案 %s：%s\n"
+#~ "\n"
+#~ "裝置的 BSD 標籤：%s\n"
-#~ msgid "%s: bad number: %s\n"
-#~ msgstr "%s：不當的數字：%s\n"
+#~ msgid "Warning: partition %d has empty type\n"
+#~ msgstr "警告：分割區 %d 有空的類型\n"
-#~ msgid "%s: fork failed: %s\n"
-#~ msgstr "%s：衍生執行時失敗：%s\n"
+#~ msgid "Partition %i does not end on cylinder boundary.\n"
+#~ msgstr "分割區 %i 並非結束於磁柱邊界。\n"
-#, fuzzy
#~ msgid ""
-#~ " -M <size> create shared memory segment of size <size>\n"
-#~ " -S <nsems> create semaphore array with <nsems> elements\n"
-#~ " -Q create message queue\n"
-#~ " -p <mode> permission for the resource (default is 0644)\n"
+#~ "\n"
+#~ "WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n"
+#~ "\n"
#~ msgstr ""
-#~ " -M <size> 以 <size> 大小建立共用記憶體資料段\n"
-#~ " -S <nsems> 以 <nsems> 元件建立號誌陣列\n"
-#~ " -Q 建立訊息佇列\n"
-#~ " -p <mode> 用於資源的權限 (預設是 0644)\n"
+#~ "\n"
+#~ "警告：於「%s」偵測到 GPT (GUID 分割表)！工具程式 fdisk 不支援 GPT。請使用 GNU Parted。\n"
+#~ "\n"
#, fuzzy
+#~ msgid "Note: sector size is %ld (not %d)\n"
+#~ msgstr "註記：磁區大小是 %ld (無法 %d)\n"
+
#~ msgid ""
#~ "\n"
-#~ "For more information see ipcmk(1).\n"
+#~ "WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n"
+#~ "\n"
#~ msgstr ""
#~ "\n"
-#~ "è¦\81ç\8d²å¾\97æ\9b´å¤\9aè³\87è¨\8aè«\8bå\8f\83ç\9c\8b ipcmk(1)。\n"
+#~ "è¦å\91\8aï¼\9aGPT (GUID å\88\86å\89²è¡¨) æ\96¼ã\80\8c%sã\80\8då\81µæ¸¬å\88°ï¼\81å·¥å\85·ç¨\8bå¼\8f sfdisk ä¸\8dæ\94¯æ\8f´ GPTã\80\82使ç\94¨ GNU Parted。\n"
#~ "\n"
-#~ msgid "cannot remove id %s (%s)\n"
-#~ msgstr "無法移除識別號 %s (%s)\n"
-
-#~ msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
-#~ msgstr "不宜用法：%s {shm | msg | sem} id ...\n"
+#~ msgid "Use the --force flag to overrule this check.\n"
+#~ msgstr "使用 --force 旗標以駁回這個檢查。\n"
-#~ msgid "unknown resource type: %s\n"
-#~ msgstr "不明的資源類型：%s\n"
+#~ msgid "exec %s failed"
+#~ msgstr "執行 %s 時失敗"
+#, fuzzy
#~ msgid ""
-#~ "usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
-#~ " [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
+#~ " -, -l, --login make the shell a login shell\n"
+#~ " -c, --command <command> pass a single command to the shell with -c\n"
+#~ " --session-command <command> pass a single command to the shell with -c\n"
+#~ " and do not create a new session\n"
+#~ " -f, --fast pass -f to the shell (for csh or tcsh)\n"
+#~ " -m, --preserve-environment do not reset environment variables\n"
+#~ " -p same as -m\n"
+#~ " -s, --shell <shell> run shell if /etc/shells allows it\n"
#~ msgstr ""
-#~ "用法：%s [ [-q msqid] [-m shmid] [-s semid]\n"
-#~ " [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
+#~ " -, -l, --login 製作命令殼登入命令殼\n"
+#~ " -c, --command <command> 回合單一命令到命令殼與 -c\n"
+#~ " --session-command<命令> 回合單一命令到命令殼與 -c\n"
+#~ " 和不建立新的作業階段\n"
+#~ " -f, --fast 回合 -f 到命令殼 (用於 csh 或 tcsh)\n"
+#~ " -m, --preserve-environment 不重置環境變數\n"
+#~ " -p 如同 -m\n"
+#~ " -s, --shell<命令殼> 運行命令殼如果/etc/命令殼允許它\n"
-#~ msgid "unknown error in key"
-#~ msgstr "鍵值發生不明錯誤"
+#, fuzzy
+#~ msgid "%s: exec failed"
+#~ msgstr "%s：exec 失敗"
-#~ msgid "unknown error in id"
-#~ msgstr "識別號發生不明錯誤"
+#, fuzzy
+#~ msgid "TIOCSCTTY: ioctl failed"
+#~ msgstr "TIOCSCTTY：ioctl 失敗"
-#~ msgid "%s: %s (%s)\n"
-#~ msgstr "%s: %s (%s)\n"
+#~ msgid "usage: %s [+format] [day month year]\n"
+#~ msgstr "用法：%s [+format] [day month year]\n"
+#~ msgid "St. Tib's Day"
+#~ msgstr "St. Tib's 日"
+
+#, fuzzy
#~ msgid ""
-#~ "Usage: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
-#~ " %1$s [-s|-m|-q] -i id\n"
-#~ " %1$s -h for help\n"
+#~ " -O, --options <list> limit the set of filesystems by mount options\n"
+#~ " -o, --output <list> the output columns to be shown\n"
+#~ " -P, --pairs use key=\"value\" output format\n"
+#~ " -r, --raw use raw output format\n"
+#~ " -t, --types <list> limit the set of filesystems by FS types\n"
#~ msgstr ""
-#~ "用法：%1$s [-asmq] [-t|-c|-l|-u|-p]\n"
-#~ " %1$s [-s|-m|-q] -i 識別號\n"
-#~ " %1$s -h 以獲得說明\n"
+#~ " -O, --options <list> 限制集合檔案系統由掛載選項\n"
+#~ " -o, --output<清單> 輸出欄位為顯示\n"
+#~ " -P, --pairs 使用鍵=\"值\"輸出格式\n"
+#~ " -r, --raw 使用原始輸出格式\n"
+#~ " -t, --types<清單> 限制集合檔案系統由 FS 類型\n"
+
+#~ msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
+#~ msgstr "用法：%s [-s signal | -p ] [ -a ] pid…\n"
+
+#~ msgid " %s -l [ signal ]\n"
+#~ msgstr " %s -l [ signal ]\n"
+
+#, fuzzy
+#~ msgid "connect %s"
+#~ msgstr "連接 %s"
+
+#, fuzzy
+#~ msgid "invalid port number argument"
+#~ msgstr "無效的埠號引數"
+#, fuzzy
#~ msgid ""
-#~ "Usage: %1$s [resource]... [output-format]\n"
-#~ " %1$s [resource] -i id\n"
#~ "\n"
+#~ "Usage:\n"
+#~ " %s [options] [<device> ...]\n"
#~ msgstr ""
-#~ "用法：%1$s [資源]... [輸出格式]\n"
-#~ " %1$s [資源] -i 識別號\n"
#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] [<device>...]\n"
+#, fuzzy
#~ msgid ""
-#~ "Provide information on IPC facilities for which you have read access.\n"
#~ "\n"
+#~ "Options:\n"
+#~ " -a, --all print all devices\n"
+#~ " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+#~ " -d, --nodeps don't print slaves or holders\n"
+#~ " -D, --discard print discard capabilities\n"
+#~ " -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
+#~ " -I, --include <list> show only devices with specified major numbers\n"
+#~ " -f, --fs output info about filesystems\n"
+#~ " -h, --help usage information (this)\n"
+#~ " -i, --ascii use ascii characters only\n"
+#~ " -m, --perms output info about permissions\n"
+#~ " -l, --list use list format ouput\n"
+#~ " -n, --noheadings don't print headings\n"
+#~ " -o, --output <list> output columns\n"
+#~ " -P, --pairs use key=\"value\" output format\n"
+#~ " -r, --raw use raw output format\n"
+#~ " -s, --inverse inverse dependencies\n"
+#~ " -t, --topology output info about topology\n"
+#~ " -V, --version output version information and exit\n"
#~ msgstr ""
-#~ "對於您有讀取權限的項目，提供 ipc 機能的資訊。\n"
#~ "\n"
+#~ "選項：\n"
+#~ " -a, --all 列印所有裝置\n"
+#~ " -b, --bytes 列印大小在中位元組而非在中人類 readable 格式\n"
+#~ " -d, --nodeps 不列印從屬或托盤\n"
+#~ " -D, --discard 列印捨棄能力\n"
+#~ " -e, --exclude <list> 排除裝置由主要的數字 (預設：RAM 磁碟)\n"
+#~ " -I, --include<清單>只顯示裝置與指定的主要的數量\n"
+#~ " -f, --fs 輸出資訊關於檔案系統\n"
+#~ " -h, --help 用法資訊 (這個)\n"
+#~ " -i, --ascii 使用 ascii 字元只有\n"
+#~ " -m, --perms 輸出資訊關於權限\n"
+#~ " -l, --list 使用清單格式 ouput\n"
+#~ " -n, --noheadings 不列印標頭\n"
+#~ " -o, --output<清單> 輸出欄位\n"
+#~ " -P, --pairs 使用鍵=「值」輸出格式\n"
+#~ " -r, --raw 使用原始輸出格式\n"
+#~ " -s, --inverse 反依存性\n"
+#~ " -t, --topology 輸出資訊關於拓樸\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#, fuzzy
#~ msgid ""
-#~ "Resource options:\n"
-#~ " -m shared memory segments\n"
-#~ " -q message queues\n"
-#~ " -s semaphores\n"
-#~ " -a all (default)\n"
+#~ " -v, --verbose explain what is being done\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
#~ "\n"
#~ msgstr ""
-#~ "資源選項：\n"
-#~ " -m 共用記憶體資料段\n"
-#~ " -q 訊息佇列\n"
-#~ " -s 號誌\n"
-#~ " -a 全部 (預設)\n"
+#~ " -v, --verbose 解釋什麼正在是已完成\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
#~ "\n"
-#~ msgid ""
-#~ "Output format:\n"
-#~ " -t time\n"
-#~ " -p pid\n"
-#~ " -c creator\n"
-#~ " -l limits\n"
-#~ " -u summary\n"
-#~ msgstr ""
-#~ "輸出格式：\n"
-#~ " -t 時間\n"
-#~ " -p pid\n"
-#~ " -c 建立者\n"
-#~ " -l 限度\n"
-#~ " -u 概要\n"
-
#, fuzzy
#~ msgid ""
-#~ " %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
+#~ " -f <file> define search scope\n"
+#~ " -b search only binaries\n"
+#~ " -B <dirs> define binaries lookup path\n"
+#~ " -m search only manual paths\n"
+#~ " -M <dirs> define man lookup path\n"
+#~ " -s search only sources path\n"
+#~ " -S <dirs> define sources lookup path\n"
+#~ " -u search from unusual entities\n"
+#~ " -V output version information and exit\n"
+#~ " -h display this help and exit\n"
+#~ "\n"
#~ msgstr ""
+#~ " -f <file> 定義搜尋範圍\n"
+#~ " -b 搜尋只有二進位\n"
+#~ " -B<dirs> 定義二進位查找路徑\n"
+#~ " -m 搜尋只有手動路徑\n"
+#~ " -M<dirs> 定義 man 查找路徑\n"
+#~ " -s 搜尋只有原始碼路徑\n"
+#~ " -S<dirs> 定義來源查找路徑\n"
+#~ " -u 搜尋從不尋常的實體\n"
+#~ " -V 輸出版本資訊然後離開\n"
+#~ " -h 顯示這份說明然後離開\n"
#~ "\n"
-#~ "用法：%s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> "
-#~ "<device>\n"
-#~ msgid "ldattach from %s\n"
-#~ msgstr "ldattach 自 %s\n"
+#, fuzzy
+#~ msgid "See how to use file and dirs arguments from whereis(1) manual.\n"
+#~ msgstr "參看如何使用檔案和 dirs 引數從位置 (1) 手動。\n"
#, fuzzy
-#~ msgid ""
-#~ " -h, --help print this help\n"
-#~ " -p, --parse <list> print out a parsable instead of a readable format\n"
-#~ " -s, --sysroot <dir> use directory DIR as system root\n"
-#~ " -x, --hex print hexadecimal masks rather than lists of CPUs\n"
-#~ "\n"
-#~ msgstr ""
-#~ "CPU 架構資訊輔助程式\n"
-#~ "\n"
-#~ " -h, --help 用法資訊\n"
-#~ " -p, --parse 以可剖析格式印出以代替可列印格式。\n"
-#~ " -s, --sysroot 使用此目錄做為新系統的根目錄。\n"
+#~ msgid "mount: couldn't lock into memory"
+#~ msgstr "掛載：無法鎖定進入記憶體"
+
+#~ msgid "mount: argument to -p or --pass-fd must be a number"
+#~ msgstr "mount：-p 或 --pass-fd 的引數必須是數字"
+
+#~ msgid "bug in xstrndup call"
+#~ msgstr "在 xstrndup 呼叫中有程式錯誤"
+
+#~ msgid "executing %s failed"
+#~ msgstr "執行 %s 時失敗"
+#, fuzzy
#~ msgid ""
-#~ "%s: Usage: \"%s [options]\n"
-#~ "\t -m <mapfile> (defaults: \"%s\" and\n"
-#~ "\t\t\t\t \"%s\")\n"
-#~ "\t -p <pro-file> (default: \"%s\")\n"
-#~ "\t -M <mult> set the profiling multiplier to <mult>\n"
-#~ "\t -i print only info about the sampling step\n"
-#~ "\t -v print verbose data\n"
-#~ "\t -a print all symbols, even if count is 0\n"
-#~ "\t -b print individual histogram-bin counts\n"
-#~ "\t -s print individual counters within functions\n"
-#~ "\t -r reset all the counters (root only)\n"
-#~ "\t -n disable byte order auto-detection\n"
-#~ "\t -V print version and exit\n"
+#~ " -C, --clear clear the kernel ring buffer\n"
+#~ " -c, --read-clear read and clear all messages\n"
+#~ " -D, --console-off disable printing messages to console\n"
+#~ " -d, --show-delta show time delta between printed messages\n"
+#~ " -e, --reltime show local time and time delta in readable format\n"
+#~ " -E, --console-on enable printing messages to console\n"
+#~ " -F, --file <file> use the file instead of the kernel log buffer\n"
+#~ " -f, --facility <list> restrict output to defined facilities\n"
+#~ " -h, --help display this help and exit\n"
+#~ " -k, --kernel display kernel messages\n"
+#~ " -l, --level <list> restrict output to defined levels\n"
+#~ " -n, --console-level <level> set level of messages printed to console\n"
+#~ " -r, --raw print the raw message buffer\n"
+#~ " -S, --syslog force to use syslog(2) rather than /dev/kmsg\n"
+#~ " -s, --buffer-size <size> buffer size to query the kernel ring buffer\n"
+#~ " -T, --ctime show human readable timestamp (could be \n"
+#~ " inaccurate if you have used SUSPEND/RESUME)\n"
+#~ " -t, --notime don't print messages timestamp\n"
+#~ " -u, --userspace display userspace messages\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -w, --follow wait for new messages\n"
+#~ " -x, --decode decode facility and level to readable string\n"
#~ msgstr ""
-#~ "%s：用法：\"%s [options]\n"
-#~ "\t -m <mapfile> (預設值：\"%s\" 和\n"
-#~ "\t\t\t\t \"%s\")\n"
-#~ "\t -p <pro-file> (預設：\"%s\")\n"
-#~ "\t -M <mult> 設定側寫檔複製器為<mult>\n"
-#~ "\t -i 只印出有關取樣率的資訊\n"
-#~ "\t -v 印出詳細的資料\n"
-#~ "\t -a 即使計數為 0 也印出所有符號\n"
-#~ "\t -b 印出個別 histogram-bin 計數\n"
-#~ "\t -s 印出函式內個別計數器\n"
-#~ "\t -r 重置所有計數器(只限 root 使用)\n"
-#~ "\t -n 停用位元組次序的自動偵測\n"
-#~ "\t -V 印出版本然後離開\n"
-
-#~ msgid "readprofile: error writing %s: %s\n"
-#~ msgstr "readprofile：寫入 %s 時錯誤：%s\n"
+#~ " -C, --clear 清空內核環緩衝區\n"
+#~ " -c, --read-clear 讀取和全部清除訊息\n"
+#~ " -D, --console-off 停用列印訊息到主控臺\n"
+#~ " -d, --show-delta 顯示時間 delta 介於列印的訊息\n"
+#~ " -e, --reltime 顯示本地時間和時間 delta 在中 readable 格式\n"
+#~ " -E, --console-on 啟用列印訊息到主控臺\n"
+#~ " -F, --file <file> 使用檔案以代替內核記錄檔緩衝區\n"
+#~ " -f, --facility<清單> 限制輸出到定義的機能\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ " -k, --kernel 顯示內核訊息\n"
+#~ " -l, --level<清單> 限制輸出到定義的等級\n"
+#~ " -n, --console-level<等級>設定等級的訊息列印到主控臺\n"
+#~ " -r, --raw 列印原始訊息緩衝區\n"
+#~ " -S, --syslog 強制以使用 syslog (2) 而非/dev/kmsg\n"
+#~ " -s, --buffer-size<大小> 緩衝區大小到查詢內核環緩衝區\n"
+#~ " -T, --ctime 顯示人類 readable 時間戳記 (可能是\n"
+#~ " inaccurate 如果您已使用懸置/再續)\n"
+#~ " -t, --notime 不列印訊息時間戳記\n"
+#~ " -u, --userspace 顯示 userspace 訊息\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -w, --follow 等待新訊息\n"
+#~ " -x, --decode 解碼機能和等級到 readable 字串\n"
+
+#, fuzzy
+#~ msgid "eject: cannot set user id"
+#~ msgstr "退出：無法設定使用者識別號"
#, fuzzy
#~ msgid ""
-#~ "\n"
-#~ "For more information see rtcwake(8).\n"
+#~ " -h, --help this help\n"
+#~ " -f, --freeze freeze the filesystem\n"
+#~ " -u, --unfreeze unfreeze the filesystem\n"
#~ msgstr ""
-#~ "\n"
-#~ "要獲得更多資訊請參看 taskset(1)。\n"
+#~ " -h, --help 這份說明\n"
+#~ " -f, --freeze 固定檔案系統\n"
+#~ " -u, --unfreeze unfreeze 檔案系統\n"
#~ msgid ""
#~ "\n"
-#~ "For more information see setarch(8).\n"
+#~ "For more information see fsfreeze(8).\n"
#~ msgstr ""
#~ "\n"
-#~ "要獲得更多資訊請參看 setarch(8)。\n"
+#~ "要獲得更多資訊請參看 fsfreeze(8)。\n"
+
+#~ msgid "max seg size (kbytes) = %lu\n"
+#~ msgstr "最大資料段大小 (千位元組) = %lu\n"
+
+#~ msgid "min seg size (bytes) = %lu\n"
+#~ msgstr "最小資料段大小 (位元組) = %lu\n"
+
+#~ msgid "shmctl failed"
+#~ msgstr "shmctl 失敗"
+
+#~ msgid "msgctl failed"
+#~ msgstr "msgctl 失敗"
+
+#~ msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
+#~ msgstr "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
+#, fuzzy
#~ msgid ""
-#~ "%s: %s\n"
-#~ "Try `%s --help' for more information.\n"
+#~ " -e, --encryption <type> enable encryption with specified <name/num>\n"
+#~ " -o, --offset <num> start at offset <num> into file\n"
+#~ " --sizelimit <num> device limited to <num> bytes of the file\n"
+#~ " -p, --pass-fd <num> read passphrase from file descriptor <num>\n"
+#~ " -P, --partscan create partitioned loop device\n"
+#~ " -r, --read-only setup read-only loop device\n"
+#~ " --show print device name after setup (with -f)\n"
+#~ " -v, --verbose verbose mode\n"
#~ msgstr ""
-#~ "%s: %s\n"
-#~ "嘗試「%s --help」以獲得更多資訊。\n"
+#~ " -e, --encryption <type> 啟用加密與指定的<名稱/num>\n"
+#~ " -o, --offset<num> 開始於偏移<num>進入檔案\n"
+#~ " --sizelimit<num> 裝置限制到<num>位元組的檔案\n"
+#~ " -p, --pass-fd<num> 讀取密語從檔案描述符號<num>\n"
+#~ " -P, --partscan 建立分割的迴圈裝置\n"
+#~ " -r, --read-only 設定唯讀迴圈裝置\n"
+#~ " --show 列印裝置名稱之後設定 (與 -f)\n"
+#~ " -v, --verbose 詳細模式\n"
-#~ msgid "usage: %s program [arg ...]\n"
-#~ msgstr "用法：%s 程式 [引數...]\n"
+#, fuzzy
+#~ msgid "invalid passphrase file descriptor"
+#~ msgstr "無效的密語檔案描述符號"
+
+#, fuzzy
+#~ msgid "%s failed to use device"
+#~ msgstr "%s 無法使用裝置"
+
+#, fuzzy
+#~ msgid "couldn't lock into memory"
+#~ msgstr "無法鎖定進入記憶體"
+#, fuzzy
#~ msgid ""
-#~ "Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n"
-#~ " -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
-#~ " -T [on|off] ]\n"
+#~ " -a, --all print online and offline CPUs (default for -e)\n"
+#~ " -b, --online print online CPUs only (default for -p)\n"
+#~ " -c, --offline print offline CPUs only\n"
+#~ " -e, --extended[=<list>] print out an extended readable format\n"
+#~ " -h, --help print this help\n"
+#~ " -p, --parse[=<list>] print out a parsable format\n"
+#~ " -s, --sysroot <dir> use directory DIR as system root\n"
+#~ " -V, --version print version information and exit\n"
+#~ " -x, --hex print hexadecimal masks rather than lists of CPUs\n"
#~ msgstr ""
-#~ "用法：%s <裝置> [ -i <IRQ> | -t <時間> | -c <字元> | -w <等待> | \n"
-#~ " -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
-#~ " -T [on|off] ]\n"
+#~ " -a, --all 列印線上和離線 CPUs (預設用於 -e)\n"
+#~ " -b, --online 列印線上 CPUs 只有 (預設用於 -p)\n"
+#~ " -c, --offline 列印離線 CPUs 只有\n"
+#~ " -e, --extended [=<list>] 印出進階 readable 格式\n"
+#~ " -h, --help 印出這份說明\n"
+#~ " -p, --parse [=<清單>] 印出 parsable 格式\n"
+#~ " -s, --sysroot<dir> 使用目錄 DIR 做為系統根\n"
+#~ " -V, --version 印出版本資訊然後離開\n"
+#~ " -x, --hex 列印十六進位遮罩而非清單的 CPUs\n"
+
+#, fuzzy
+#~ msgid "%s: failed to setup loop device (probably unknown encryption type)"
+#~ msgstr "%s：無法設定迴圈裝置 (或許不明加密型態)"
-#~ msgid "%s: bad value\n"
-#~ msgstr "%s：不當的值\n"
+#~ msgid "renice from %s\n"
+#~ msgstr "renice 自 %s\n"
+#, fuzzy
#~ msgid ""
-#~ "\n"
-#~ "For more information see unshare(1).\n"
+#~ " -d, --device <device> select rtc device (rtc0|rtc1|...)\n"
+#~ " -n, --dry-run does everything, but suspend\n"
+#~ " -l, --local RTC uses local timezone\n"
+#~ " -m, --mode <mode> standby|mem|... sleep mode\n"
+#~ " -s, --seconds <seconds> seconds to sleep\n"
+#~ " -t, --time <time_t> time to wake\n"
+#~ " -u, --utc RTC uses UTC\n"
+#~ " -v, --verbose verbose messages\n"
#~ msgstr ""
-#~ "\n"
-#~ "要獲得更多資訊請參看 unshare(1)。\n"
+#~ " -d, --device <device> 選取 rtc 裝置 (rtc0|rtc1|...)\n"
+#~ " -n, --dry-run 做所有東西，但是懸置\n"
+#~ " -l, --local RTC 使用本地時區\n"
+#~ " -m, --mode<模式> 待機|mem|...暫停模式\n"
+#~ " -s, --seconds<秒> 秒到暫停\n"
+#~ " -t, --time<timet(_T)> 時間到喚醒\n"
+#~ " -u, --utc RTC 使用 UTC\n"
+#~ " -v, --verbose 詳細的訊息\n"
+
+#, fuzzy
+#~ msgid "unable to execute %s"
+#~ msgstr "無法執行 %s"
#, fuzzy
-#~ msgid "closing file %s"
+#~ msgid ""
+#~ " -v, --verbose says what options are being switched on\n"
+#~ " -R, --addr-no-randomize disables randomization of the virtual address space\n"
+#~ " -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
+#~ " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
+#~ " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
+#~ " -X, --read-implies-exec turns on READ_IMPLIES_EXEC\n"
+#~ " -B, --32bit turns on ADDR_LIMIT_32BIT\n"
+#~ " -I, --short-inode turns on SHORT_INODE\n"
+#~ " -S, --whole-seconds turns on WHOLE_SECONDS\n"
+#~ " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
+#~ " -3, --3gb limits the used address space to a maximum of 3 GB\n"
+#~ " --4gb ignored (for backward compatibility only)\n"
+#~ " --uname-2.6 turns on UNAME26\n"
#~ msgstr ""
-#~ "\n"
-#~ "關閉檔案發生錯誤\n"
+#~ " -v, --verbose 表示什麼選項正在被切換於\n"
+#~ " -R, --addr-no-randomize 停用 randomization 的虛擬位址空間\n"
+#~ " -F, --fdpic-funcptrs 製作函式指標點到描述元\n"
+#~ " -Z, --mmap-page-zero 打開 MMAP_PAGE_ZERO\n"
+#~ " -L, --addr-compat-layout 變更方式虛擬記憶體被配置\n"
+#~ " -X, --read-implies-exec 打開 READ_IMPLIES_EXEC\n"
+#~ " -B, --32 位元 打開 ADDR_LIMIT_32 位元\n"
+#~ " -I, --short-inode 打開 SHORT_INODE\n"
+#~ " -S, --whole-seconds 打開 WHOLE_SECONDS\n"
+#~ " -T, --sticky-timeouts 打開 STICKY_TIMEOUTS\n"
+#~ " -3, --3 gb 限度使用的位址空間到最大值的 3 GB\n"
+#~ " --4 gb 忽略 (用於回溯相容性只有)\n"
+#~ " --uname-2.6 打開 UNAME26\n"
-#~ msgid "Sorry You may change the Tag of non-empty partitions.\n"
-#~ msgstr "抱歉，您也許變更了非空白分割區的標記。\n"
+#, fuzzy
+#~ msgid "execvp failed"
+#~ msgstr "execvp 失敗"
-#~ msgid "Warning: partition %s "
-#~ msgstr "警告：分割區 %s "
+#~ msgid "execv failed"
+#~ msgstr "execv 失敗"
-#~ msgid "Warning: partitions %s "
-#~ msgstr "警告：分割區 %s "
+#, fuzzy
+#~ msgid ""
+#~ " -a, --all umount all filesystems\n"
+#~ " -c, --no-canonicalize don't canonicalize paths\n"
+#~ " -d, --detach-loop if mounted loop device, also free this loop device\n"
+#~ " --fake dry run; skip the umount(2) syscall\n"
+#~ " -f, --force force unmount (in case of an unreachable NFS system)\n"
+#~ msgstr ""
+#~ " -a, --all umount 所有檔案系統\n"
+#~ " -c, --no-canonicalize 不正則化路徑\n"
+#~ " -d, --detach-loop 如果掛載的迴圈裝置，也自由這個迴圈裝置\n"
+#~ " --fake 模擬測試；跳過 umount (2) syscall\n"
+#~ " -f, --force 強制卸載 (萬一無法連線的 NFS 系統)\n"
-#~ msgid "and %s overlap\n"
-#~ msgstr "和 %s 重疊\n"
+#, fuzzy
+#~ msgid ""
+#~ " -i, --internal-only don't call the umount.<type> helpers\n"
+#~ " -n, --no-mtab don't write to /etc/mtab\n"
+#~ " -l, --lazy detach the filesystem now, and cleanup all later\n"
+#~ msgstr ""
+#~ " -i, --internal-only 不呼叫 umount。<type> 輔助程式\n"
+#~ " -n, --no-mtab 不寫入/etc/mtab\n"
+#~ " -l, --lazy 卸離檔案系統現在，而清理所有稍後\n"
#, fuzzy
#~ msgid ""
-#~ "\n"
-#~ "Usage:\n"
-#~ " %s [options] device [...]\n"
-#~ msgstr "用法：%s [選項] 裝置…\n"
+#~ " -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
+#~ " -r, --read-only In case unmounting fails, try to remount read-only\n"
+#~ " -t, --types <list> limit the set of filesystem types\n"
+#~ " -v, --verbose say what is being done\n"
+#~ msgstr ""
+#~ " -O, --test-opts <list> 限制集合檔案系統 (使用與 -a)\n"
+#~ " -r, --read-only 在中大小寫卸載失敗，試著 remount 唯讀\n"
+#~ " -t, --types<清單> 限制集合檔案系統類型\n"
+#~ " -v, --verbose 表示什麼正在是已完成\n"
#, fuzzy
-#~ msgid "Device is something like /dev/hda or /dev/sda\n"
-#~ msgstr "裝置：諸如 /dev/hda 或 /dev/sda"
+#~ msgid ""
+#~ " -m, --mount unshare mounts namespace\n"
+#~ " -u, --uts unshare UTS namespace (hostname etc)\n"
+#~ " -i, --ipc unshare System V IPC namespace\n"
+#~ " -n, --net unshare network namespace\n"
+#~ msgstr ""
+#~ " -m, --mount unshare 掛載命名空間\n"
+#~ " -u, --uts unshare UTS 命名空間 (主機名稱 etc)\n"
+#~ " -i, --ipc unshare 系統 V IPC 命名空間\n"
+#~ " -n, --net unshare 網路命名空間\n"
+
+#, fuzzy
+#~ msgid "%-15s%s [version %x]\n"
+#~ msgstr "%-15s%s [版本 %x]\n"
#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Options:\n"
-#~ " -s, --fstab search in static table of filesystems\n"
-#~ " -m, --mtab search in table of mounted filesystems\n"
-#~ " -k, --kernel search in kernel table of mounted \n"
-#~ " filesystems (default)\n"
-#~ "\n"
-#~ " -p, --poll[=<list>] monitor changes in table of mounted filesystems\n"
-#~ " -w, --timeout <num> upper limit in millisecods which --poll will "
-#~ "block\n"
-#~ "\n"
-#~ " -c, --canonicalize canonicalize printed paths\n"
-#~ " -d, --direction <word> search direction - 'forward' or 'backward'\n"
-#~ " -e, --evaluate print all TAGs (LABEL/UUID) evaluated\n"
-#~ " -f, --first-only print the first found filesystem only\n"
-#~ " -h, --help print this help\n"
-#~ " -i, --invert invert sense of matching\n"
-#~ " -l, --list use list format output\n"
-#~ " -n, --noheadings don't print headings\n"
-#~ " -u, --notruncate don't truncate text in columns\n"
-#~ " -O, --options <list> limit the set of filesystems by mount options\n"
-#~ " -o, --output <list> output columns\n"
-#~ " -P, --pairs use key=\"value\" output format\n"
-#~ " -r, --raw use raw output format\n"
-#~ " -a, --ascii use ascii chars for tree formatting\n"
-#~ " -t, --types <list> limit the set of filesystem by FS types\n"
-#~ " -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
-#~ " -R, --submounts print all submount for the matching filesystems\n"
-#~ " -S, --source <string> device, LABEL= or UUID=device\n"
-#~ " -T, --target <string> mountpoint\n"
+#~ " -8, --8bits assume 8-bit tty\n"
+#~ " -a, --autologin <user> login the specified user automatically\n"
+#~ " -c, --noreset do not reset control mode\n"
+#~ " -f, --issue-file <file> display issue file\n"
+#~ " -h, --flow-control enable hardware flow control\n"
+#~ " -H, --host <hostname> specify login host\n"
+#~ " -i, --noissue do not display issue file\n"
+#~ " -I, --init-string <string> set init string\n"
+#~ " -l, --login-program <file> specify login program\n"
+#~ " -L, --local-line force local line\n"
+#~ " -m, --extract-baud extract baud rate during connect\n"
+#~ " -n, --skip-login do not prompt for login\n"
+#~ " -o, --login-options <opts> options that are passed to login\n"
+#~ " -p, --loginpause wait for any key before the login\n"
+#~ " -R, --hangup do virtually hangup on the tty\n"
+#~ " -s, --keep-baud try to keep baud rate after break\n"
+#~ " -t, --timeout <number> login process timeout\n"
+#~ " -U, --detect-case detect uppercase terminal\n"
+#~ " -w, --wait-cr wait carriage-return\n"
+#~ " --noclear do not clear the screen before prompt\n"
+#~ " --nohints do not print hints\n"
+#~ " --nonewline do not print a newline before issue\n"
+#~ " --no-hostname no hostname at all will be shown\n"
+#~ " --long-hostname show full qualified hostname\n"
+#~ " --version output version information and exit\n"
+#~ " --help display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "選項：\n"
-#~ " -s, --fstab 在檔案系統的靜態表格中搜尋\n"
-#~ " -m, --mtab 在掛載檔案系統的表格中搜尋\n"
-#~ " -k, --kernel 在掛載檔案系統的內核表格中\n"
-#~ " 搜尋 (預設)\n"
-#~ "\n"
-#~ " -c, --canonicalize 正則化印出路徑\n"
-#~ " -d, --direction <word> 搜尋方向 - 'forward' 或 'backward'\n"
-#~ " -e, --evaluate 印出所有已求值標記 (LABEL/UUID)\n"
-#~ " -f, --first-only 只印出第一個找到的檔案系統\n"
-#~ " -h, --help 印出這個說明\n"
-#~ " -i, --invert 反向符合方式\n"
-#~ " -l, --list 使用清單格式輸出\n"
-#~ " -n, --noheadings 不列印標頭\n"
-#~ " -u, --notruncate 不截斷直欄中的文字\n"
-#~ " -O, --options <list> 依掛載選項限制檔案系統集合\n"
-#~ " -o, --output <list> 輸出直欄\n"
-#~ " -r, --raw 使用原始格式輸出\n"
-#~ " -a, --ascii 使用 ascii 字元於樹狀格式化\n"
-#~ " -t, --types <list> 依檔案系統類型限制檔案系統集合\n"
-#~ " -S, --source <string> 裝置、LABEL= 或 UUID=裝置\n"
-#~ " -T, --target <string> 掛載點\n"
+#~ " -8, --8 位元 假設 8-bit tty\n"
+#~ " -a, --autologin <user> 登入指定的使用者自動\n"
+#~ " -c, --noreset 不重置控制模式\n"
+#~ " -f, --issue-file<檔案> 顯示議題檔案\n"
+#~ " -h, --flow-control 啟用硬體流量控制\n"
+#~ " -H, --host<主機名稱> 指定登入主機\n"
+#~ " -i, --noissue 不顯示議題檔案\n"
+#~ " -I, --init-string<字串>設定 init 字串\n"
+#~ " -l, --login-program<檔案>指定登入程式\n"
+#~ " -L, --local-line 強制本地列\n"
+#~ " -m, --extract-baud 抽出鮑率在的期間連接\n"
+#~ " -n, --skip-login 不提示用於登入\n"
+#~ " -o, --login-options<opts>選項所傳遞到登入\n"
+#~ " -p, --loginpause 等待任何鍵之前登入\n"
+#~ " -R, --hangup 做虛擬掛斷在之上 tty\n"
+#~ " -s, --keep-baud 試著保持鮑率之後中斷\n"
+#~ " -t, --timeout<數字> 登入程序逾時\n"
+#~ " -U, --detect-case 偵測大寫終端機\n"
+#~ " -w, --wait-cr 等待換列字元\n"
+#~ " --noclear 不清空螢幕之前提示\n"
+#~ " --nohints 不列印提示\n"
+#~ " --nonewline 不列印新列字元之前議題\n"
+#~ " --no-hostname 沒有主機名稱於所有將是顯示\n"
+#~ " --long-hostname 顯示全部經資格修飾主機名稱\n"
+#~ " --version 輸出版本資訊然後離開\n"
+#~ " --help 顯示這份說明然後離開\n"
#~ "\n"
-#~ msgid "%zd bytes ["
-#~ msgstr "%zd 位元組 ["
+#~ msgid "users"
+#~ msgstr "使用者"
#, fuzzy
#~ msgid ""
-#~ "\n"
-#~ "Usage:\n"
-#~ " %1$s -a [-e] [-v] [-f] enable all swaps from /etc/fstab\n"
-#~ " %1$s [-p priority] [-d] [-v] [-f] <special> enable given swap\n"
-#~ " %1$s -s display swap usage summary\n"
-#~ " %1$s -h display help\n"
-#~ " %1$s -V display version\n"
-#~ "\n"
+#~ " -term <terminal_name>\n"
+#~ " -reset\n"
+#~ " -initialize\n"
+#~ " -cursor <on|off>\n"
+#~ " -repeat <on|off>\n"
+#~ " -appcursorkeys <on|off>\n"
+#~ " -linewrap <on|off>\n"
+#~ " -default\n"
+#~ " -foreground <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
+#~ " -background <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
+#~ " -ulcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
+#~ " -ulcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
+#~ " -hbcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
+#~ " -hbcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
+#~ " -inversescreen <on|off>\n"
+#~ " -bold <on|off>\n"
+#~ " -half-bright <on|off>\n"
+#~ " -blink <on|off>\n"
+#~ " -reverse <on|off>\n"
+#~ " -underline <on|off>\n"
+#~ " -store >\n"
+#~ " -clear <all|rest>\n"
+#~ " -tabs < tab1 tab2 tab3 ... > (tabn = 1-160)\n"
+#~ " -clrtabs < tab1 tab2 tab3 ... > (tabn = 1-160)\n"
+#~ " -regtabs <1-160>\n"
+#~ " -blank <0-60|force|poke>\n"
+#~ " -dump <1-NR_CONSOLES>\n"
+#~ " -append <1-NR_CONSOLES>\n"
+#~ " -file dumpfilename\n"
+#~ " -msg <on|off>\n"
+#~ " -msglevel <0-8>\n"
+#~ " -powersave <on|vsync|hsync|powerdown|off>\n"
+#~ " -powerdown <0-60>\n"
+#~ " -blength <0-2000>\n"
+#~ " -bfreq freqnumber\n"
+#~ " -version\n"
+#~ " -help\n"
#~ msgstr ""
-#~ "\n"
-#~ "用法：\n"
-#~ " %1$s -a [-e] [-v] [-f] 從 /etc/fstab 啟用全部交換區\n"
-#~ " %1$s [-p 優先權] [-v] [-f] <special> 啟用給定交換區\n"
-#~ " %1$s -s 顯示交換區用法概要\n"
-#~ " %1$s -h 顯示說明\n"
-#~ " %1$s -V 顯示版本\n"
-#~ "\n"
+#~ " -term <terminal_name>\n"
+#~ " -reset\n"
+#~ " -initialize\n"
+#~ " -cursor<於|關閉>\n"
+#~ " -repeat<於|關閉>\n"
+#~ " -appcursorkeys<於|關閉>\n"
+#~ " -linewrap<於|關閉>\n"
+#~ " -default\n"
+#~ " -foreground<黑色|藍色|綠色|青色|紅色|洋紅|黃色|白色|預設>\n"
+#~ " -background<黑色|藍色|綠色|青色|紅色|洋紅|黃色|白色|預設>\n"
+#~ " -ulcolor<黑色|灰色|藍色|綠色|青色|紅色|洋紅|黃色|白色>\n"
+#~ " -ulcolor<明亮藍色|綠色|青色|紅色|洋紅|黃色|白色>\n"
+#~ " -hbcolor<黑色|灰色|藍色|綠色|青色|紅色|洋紅|黃色|白色>\n"
+#~ " -hbcolor<明亮藍色|綠色|青色|紅色|洋紅|黃色|白色>\n"
+#~ " -inversescreen<於|關閉>\n"
+#~ " -bold<於|關閉>\n"
+#~ " -half-bright<於|關閉>\n"
+#~ " -blink<於|關閉>\n"
+#~ " -reverse<於|關閉>\n"
+#~ " -underline<於|關閉>\n"
+#~ " -store>\n"
+#~ " -clear<所有|其餘的>\n"
+#~ " -tabs<tab1 tab2 tab3…> (tabn=1-160)\n"
+#~ " -clrtabs<tab1 tab2 tab3…> (tabn=1-160)\n"
+#~ " -regtabs <1-160>\n"
+#~ " -blank <0-60| 強制|poke>\n"
+#~ " -dump <1-NR_CONSOLES>\n"
+#~ " -append <1-NR_CONSOLES>\n"
+#~ " -file dumpfilename\n"
+#~ " -msg<於|關閉>\n"
+#~ " -msglevel <0-8>\n"
+#~ " -powersave<於|vsync|hsync|powerdown|關閉>\n"
+#~ " -powerdown <0-60>\n"
+#~ " -blength <0-2000>\n"
+#~ " -bfreq freqnumber\n"
+#~ " -version\n"
+#~ " -help\n"
+
+#~ msgid "too many iov's (change code in wall/ttymsg.c)"
+#~ msgstr "太多 iov's (變更 wall/ttymsg.c 中的編碼)"
+
+#, fuzzy
+#~ msgid "write error."
+#~ msgstr "寫入錯誤。"
+#, fuzzy
#~ msgid ""
#~ "\n"
-#~ "Usage:\n"
-#~ " %1$s -a [-v] disable all swaps\n"
-#~ " %1$s [-v] <special> disable given swap\n"
-#~ " %1$s -h display help\n"
-#~ " %1$s -V display version\n"
-#~ "\n"
+#~ "Usage: %s [options] [file ...]\n"
#~ msgstr ""
#~ "\n"
-#~ "用法：\n"
-#~ " %1$s -a [-v] 停用所有交換區\n"
-#~ " %1$s [-v] <special> 停用給定的交換區\n"
-#~ " %1$s -h 顯示說明\n"
-#~ " %1$s -V 顯示版本\n"
-#~ "\n"
+#~ "用法：%s [選項] [檔案...]\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -h, --help displays this help text\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -c, --columns <width> width of output in number of characters\n"
+#~ " -t, --table create a table\n"
+#~ " -s, --separator <string> table delimeter\n"
+#~ " -x, --fillrows fill rows before columns\n"
+#~ msgstr ""
+#~ " -h, --help 顯示這份說明文字\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -c, --columns <width> 寬度的輸出在中字元數的\n"
+#~ " -t, --table 建立表格\n"
+#~ " -s, --separator<字串>表格 delimeter\n"
+#~ " -x, --fillrows 填充列之前欄位\n"
+#, fuzzy
#~ msgid ""
-#~ "Usage: %s [options] <filename>\n"
#~ "\n"
-#~ "Options:\n"
+#~ "For more information see column(1).\n"
#~ msgstr ""
-#~ "用法：%s [選項] <檔案名稱>\n"
#~ "\n"
-#~ "選項：\n"
+#~ "要獲得更多資訊請參看欄 (1)。\n"
+
+#, fuzzy
+#~ msgid "more (%s)\n"
+#~ msgstr "更多 (%s)\n"
+#, fuzzy
#~ msgid ""
#~ "\n"
-#~ "Usage: %s [options]\n"
-#~ "\n"
+#~ "Usage:\n"
+#~ " %s [options] [file...]\n"
#~ msgstr ""
#~ "\n"
-#~ "用法：%s [選項]\n"
-#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] [檔案...]\n"
#, fuzzy
#~ msgid ""
-#~ "Usage: %s [options]\n"
#~ "\n"
#~ "Options:\n"
+#~ " -t, --terminal TERMINAL override the TERM environment variable\n"
+#~ " -i, --indicated underlining is indicated via a separate line\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
#~ msgstr ""
-#~ "用法：%s [選項] <裝置>\n"
#~ "\n"
#~ "選項：\n"
-
-#, fuzzy
-#~ msgid ""
+#~ " -t, --terminal 終端機 強制變更用語環境變數\n"
+#~ " -i, --indicated 底線被指出透過分隔列\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
#~ "\n"
-#~ "Usage:\n"
-#~ " %s [options] [file]\n"
-#~ msgstr "用法：%s [選項] 裝置…\n"
#~ msgid " %s -V\n"
#~ msgstr " %s -V\n"
#~ msgid " %s [-v|-q] commands devices\n"
#~ msgstr " %s [-v|-q] 命令裝置\n"
-#~ msgid "Available commands:\n"
-#~ msgstr "可用命令：\n"
-
#~ msgid "%s: cannot open %s\n"
#~ msgstr "%s：無法開啟 %s\n"
-#~ msgid "parse error\n"
-#~ msgstr "剖析錯誤\n"
-
#~ msgid "usage: %s [ -n ] device\n"
#~ msgstr "用法：%s [-n] 裝置\n"
-#~ msgid "%s: not a block device\n"
-#~ msgstr "%s：不是區塊裝置\n"
+#~ msgid ""
+#~ "usage: %s [-hv] [-x dir] file\n"
+#~ " -h print this help\n"
+#~ " -x dir extract into dir\n"
+#~ " -v be more verbose\n"
+#~ " file file to test\n"
+#~ msgstr ""
+#~ "用法：%s [-hv] [-x dir] file\n"
+#~ " -h 印出這個說明\n"
+#~ " -x dir 解開到目錄\n"
+#~ " -v 更詳細的訊息\n"
+#~ " file 用來測試的檔案\n"
#~ msgid "malloc failed"
#~ msgstr "malloc 失敗"
-#~ msgid "%s: option parse error\n"
-#~ msgstr "%s：選項剖析錯誤\n"
+#~ msgid "Usage: %s [-larvsmf] /dev/name\n"
+#~ msgstr "用法：%s [-larvsmf] /dev/name\n"
#~ msgid "Usage: %s [-x] [-d <num>] iso9660-image\n"
#~ msgstr "用法：%s [-x] [-d<num>] iso9660-image\n"
#~ "用法：%s [-v] [-N nr-of-inodes] [-V 卷冊名稱]\n"
#~ " [-F 檔案系統名稱] 裝置 [區塊數量]\n"
-#~ msgid "unable to stat %s"
-#~ msgstr "無法顯示狀態 %s"
+#~ msgid "cannot stat device %s"
+#~ msgstr "無法識別裝置狀態 %s"
#~ msgid "cannot determine sector size for %s"
#~ msgstr "無法決定磁區大小給 %s"
-#~ msgid "%s: calloc() failed: %s\n"
-#~ msgstr "%s：calloc() 失敗：%s\n"
-
#~ msgid "Usage: %s [-c] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n"
#~ msgstr "用法：%s [-c] [-p頁面大小] [-L 標籤] [-U UUID] /dev/名稱 [區塊]\n"
-#~ msgid "Out of memory"
-#~ msgstr "記憶體不足"
+#~ msgid "%s: error: will not try to make swapdevice on '%s'\n"
+#~ msgstr "%s：錯誤：將不會試著於「%s」製作交換裝置\n"
#~ msgid ""
#~ "Usage:\n"
#~ "用法：\n"
#~ " %s "
-#~ msgid "Cannot open master raw device '"
-#~ msgstr "無法開啟主要 raw 裝置 '"
+#~ msgid ""
+#~ "\n"
+#~ "For more information see swaplabel(8).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 swaplabel(8)。\n"
+
+#~ msgid "Partition ends in the final partial cylinder"
+#~ msgstr "分割區結尾在最後部分磁柱"
#~ msgid "Menu without direction. Defaulting to horizontal."
#~ msgstr "選單沒有方向，預設水平方式。"
+#~ msgid " d delete a BSD partition"
+#~ msgstr " d 刪除 BSD 分割"
+
+#~ msgid " n add a new BSD partition"
+#~ msgstr " n 加入新的 BSD 分割"
+
+#~ msgid " t change a partition's filesystem id"
+#~ msgstr " t 變更分割區的檔案系統識別號"
+
+#~ msgid " u change units (cylinders/sectors)"
+#~ msgstr " u 變更單位 (磁柱/磁區)"
+
+#~ msgid "Unable to open %s\n"
+#~ msgstr "無法開啟 %s\n"
+
+#~ msgid "Unable to allocate any more memory\n"
+#~ msgstr "無法配置更多的記憶體\n"
+
+#~ msgid " p print the partition table"
+#~ msgstr " p 印出分割表"
+
+#~ msgid ""
+#~ "Building a new DOS disklabel with disk identifier 0x%08x.\n"
+#~ "Changes will remain in memory only, until you decide to write them.\n"
+#~ "After that, of course, the previous content won't be recoverable.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "以磁碟識別碼 0x%08x 建立新的 DOS 磁碟標籤。\n"
+#~ "變更將僅存於記憶體之中，直到您決定寫入它們。\n"
+#~ "在此之後，前一個內容當然將無法回復。\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "This disk has both DOS and BSD magic.\n"
+#~ "Give the 'b' command to go to BSD mode.\n"
+#~ msgstr ""
+#~ "這個磁碟同時有 DOS 和 BSD 特殊碼。\n"
+#~ "輸入「b」命令以前往 BSD 模式。\n"
+
+#~ msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n"
+#~ msgstr "裝置不含有效的 DOS 分割表，也不含 Sun、SGI 或 OSF 磁碟標籤\n"
+
+#~ msgid "Internal error\n"
+#~ msgstr "內部錯誤\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "got EOF thrice - exiting..\n"
+#~ msgstr ""
+#~ "\n"
+#~ "得到 EOF 三次 - 離開中..\n"
+
+#~ msgid "Partition %i does not start on cylinder boundary:\n"
+#~ msgstr "分割區 %i 並非開始於磁柱邊界：\n"
+
+#~ msgid "should be (%d, %d, 1)\n"
+#~ msgstr "應該是 (%d, %d, 1)\n"
+
+#~ msgid "should be (%d, %d, %d)\n"
+#~ msgstr "應該是 (%d, %d, %d)\n"
+
#~ msgid "You must delete some partition and add an extended partition first\n"
#~ msgstr "您必須刪除某些分割區並先加入擴充分割區\n"
#~ " %s\n"
#~ " p 主要分割區 (1-4)\n"
-#~ msgid " -s [or --show-size]: list size of a partition"
-#~ msgstr " -s [或 --show-size]：列出分割區大小"
+#~ msgid "This kernel finds the sector size itself - -b option ignored\n"
+#~ msgstr "內核自行找到磁區大小 - -b 選項忽略\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "\tSorry, no experts menu for SGI partition tables available.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "\t抱歉，沒有可用的 SGI 分割表專家選單。\n"
+#~ "\n"
-#~ msgid " -c [or --id]: print or change partition Id"
-#~ msgstr " -c [或 --id]： 印出或變更分割區識別號"
+#~ msgid "Sorry You may change the Tag of non-empty partitions.\n"
+#~ msgstr "抱歉，您也許變更了非空白分割區的標記。\n"
-#~ msgid " -l [or --list]: list partitions of each device"
-#~ msgstr " -l [或 --list]： 列出每個裝置的分割區"
+#~ msgid "Do You know, You got a partition overlap on the disk?\n"
+#~ msgstr "您知道在磁碟上有重疊的分割區嗎？\n"
#~ msgid ""
-#~ " -d [or --dump]: idem, but in a format suitable for later input"
+#~ "Building a new SGI disklabel. Changes will remain in memory only,\n"
+#~ "until you decide to write them. After that, of course, the previous\n"
+#~ "content will be unrecoverably lost.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "建立新的 SGI 磁碟標籤。變更將只保留於記憶體中，\n"
+#~ "直到您決定寫入它們。當然在此之後，前一個\n"
+#~ "內容將會失去而無法回復。\n"
+#~ "\n"
+
+#~ msgid "out of memory - giving up\n"
+#~ msgstr "記憶體不足 - 放棄\n"
+
+#~ msgid "out of memory?\n"
+#~ msgstr "記憶體不足？\n"
+
+#~ msgid "and %s overlap\n"
+#~ msgstr "和 %s 重疊\n"
+
+#~ msgid "device: something like /dev/hda or /dev/sda"
+#~ msgstr "裝置：諸如 /dev/hda 或 /dev/sda"
+
+#~ msgid " -s [or --show-size]: list size of a partition"
+#~ msgstr " -s [或 --show-size]：列出分割區大小"
+
+#~ msgid " -d [or --dump]: idem, but in a format suitable for later input"
#~ msgstr " -d [或 --dump]： idem，但是格式是適於稍後輸入"
-#~ msgid ""
-#~ " -i [or --increment]: number cylinders etc. from 1 instead of from 0"
+#~ msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0"
#~ msgstr " -i [或 --increment]：磁柱等項的編號。從 1 而非 0 開始"
-#~ msgid ""
-#~ " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/"
-#~ "cylinders/MB"
+#~ msgid " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB"
#~ msgstr " -uS，-uB，-uC，-uM： 接受/報告的單位是磁區/區塊/磁柱/MB"
-#~ msgid " -T [or --list-types]:list the known partition types"
-#~ msgstr " -T [或 --list-types]：列出已知分割區類型"
-
#~ msgid " -D [or --DOS]: for DOS-compatibility: waste a little space"
#~ msgstr " -D [或 --DOS]： 用於 DOS-相容性：浪費一些空間"
#~ msgid " -R [or --re-read]: make kernel reread partition table"
#~ msgstr " -R [或 --re-read]： 讓內核重新讀取分割表"
-#~ msgid " -N# : change only the partition with number #"
-#~ msgstr " -N# ： 只變更編號為 # 的分割區"
-
-#~ msgid " -n : do not actually write to disk"
-#~ msgstr " -n ： 不要真地寫入磁碟"
-
-#~ msgid ""
-#~ " -O file : save the sectors that will be overwritten to file"
+#~ msgid " -O file : save the sectors that will be overwritten to file"
#~ msgstr " -O 檔案 ： 把將要被覆寫的磁區儲存到檔案"
#~ msgid " -I file : restore these sectors again"
#~ msgid " -v [or --version]: print version"
#~ msgstr " -v [或 --version]： 印出版本"
-#~ msgid " -? [or --help]: print this message"
-#~ msgstr " -? [或 --help]： 印出這個訊息"
-
#~ msgid " -g [or --show-geometry]: print the kernel's idea of the geometry"
#~ msgstr " -g [或 --show-geometry]：印出內核對於硬碟結構參數的認知"
-#~ msgid ""
-#~ " -L [or --Linux]: do not complain about things irrelevant for "
-#~ "Linux"
+#~ msgid " -L [or --Linux]: do not complain about things irrelevant for Linux"
#~ msgstr " -L [或 --Linux]： 不抱怨對於 Linux 而言並不重要的東西"
-#~ msgid " -q [or --quiet]: suppress warning messages"
-#~ msgstr " -q [或 --quiet]： 抑制警告訊息"
-
#~ msgid " You can override the detected geometry using:"
#~ msgstr " 您可以強制變更偵測到的硬碟結構參數而使用："
-#~ msgid " -C# [or --cylinders #]:set the number of cylinders to use"
-#~ msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
+#~ msgid " -f [or --force]: do what I say, even if it is stupid"
+#~ msgstr " -f [或 --force]： 照我所說的去做，即使它有些愚蠢"
-#~ msgid " -H# [or --heads #]: set the number of heads to use"
-#~ msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+#~ msgid ""
+#~ "\n"
+#~ "sfdisk: premature end of input\n"
+#~ msgstr ""
+#~ "\n"
+#~ "sfdisk：未達結尾的輸入\n"
-#~ msgid " -S# [or --sectors #]: set the number of sectors to use"
-#~ msgstr " -S# [或 --sectors #]： 設定要用的磁區數量"
+#~ msgid "WARNING: couldn't open %s: %s\n"
+#~ msgstr "警告：無法開啟 %s：%s\n"
-#~ msgid "You can disable all consistency checking with:"
-#~ msgstr "您可以停用所有的一致性檢查藉由："
+#~ msgid "WARNING: bad format on line %d of %s\n"
+#~ msgstr "警告：不當的格式於 %2$s 的第 %1$d 列\n"
-#~ msgid " -f [or --force]: do what I say, even if it is stupid"
-#~ msgstr " -f [或 --force]： 照我所說的去做，即使它有些愚蠢"
+#~ msgid ""
+#~ "WARNING: Your /etc/fstab does not contain the fsck passno\n"
+#~ "\tfield. I will kludge around things for you, but you\n"
+#~ "\tshould fix your /etc/fstab file as soon as you can.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "警告：您的 /etc/fstab 不包含 fsck passno\n"
+#~ "\t欄位。我將為您打點瑣事，但是您\n"
+#~ "\t應該儘快修正您的 /etc/fstab 檔案。\n"
+#~ "\n"
#~ msgid "Couldn't allocate memory for filesystem types\n"
#~ msgstr "無法配置記憶體給檔案系統類型\n"
-#~ msgid ""
-#~ "Usage: fsck [-AMNPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] "
-#~ "[filesys ...]\n"
-#~ msgstr ""
-#~ "用法：fsck [-AMNPRTV] [ -C [ fd ] ] [-t 檔案系統類型] [檔案系統選項] [檔案"
-#~ "系統 ...]\n"
+#~ msgid "Usage: fsck [-AMNPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]\n"
+#~ msgstr "用法：fsck [-AMNPRTV] [ -C [ fd ] ] [-t 檔案系統類型] [檔案系統選項] [檔案系統 …]\n"
#~ msgid "Couldn't open %s: %s\n"
#~ msgstr "無法開啟 %s：%s\n"
#~ msgid "getopt (enhanced) 1.1.4\n"
#~ msgstr "getopt (進階版) 1.1.4\n"
+#~ msgid "Cannot open /dev/port: %s"
+#~ msgstr "無法開啟 /dev/port：%s"
+
#~ msgid "(Expected: `UTC' or `LOCAL' or nothing.)\n"
#~ msgstr "(預期：「UTC」、「本地」或沒有任何設定。)\n"
#~ " -s | --hctosys set the system time from the hardware clock\n"
#~ " -w | --systohc set the hardware clock to the current system time\n"
#~ " --systz set the system time based on the current timezone\n"
-#~ " --adjust adjust the rtc to account for systematic drift "
-#~ "since\n"
+#~ " --adjust adjust the rtc to account for systematic drift since\n"
#~ " the clock was last set or adjusted\n"
#~ " --getepoch print out the kernel's hardware clock epoch value\n"
-#~ " --setepoch set the kernel's hardware clock epoch value to "
-#~ "the \n"
+#~ " --setepoch set the kernel's hardware clock epoch value to the \n"
#~ " value given with --epoch\n"
#~ " --predict predict rtc reading at time given with --date\n"
#~ " -v | --version print out the version of hwclock to stdout\n"
#~ " -f | --rtc=path special /dev/... file to use instead of default\n"
#~ " --directisa access the ISA bus directly instead of %s\n"
#~ " --badyear ignore rtc's year because the bios is broken\n"
-#~ " --date specifies the time to which to set the hardware "
-#~ "clock\n"
+#~ " --date specifies the time to which to set the hardware clock\n"
#~ " --epoch=year specifies the year which is the beginning of the \n"
#~ " hardware clock's epoch value\n"
#~ " --noadjfile do not access /etc/adjtime. Requires the use of\n"
#~ " either --utc or --localtime\n"
#~ " --adjfile=path specifies the path to the adjust file (default is\n"
#~ " /etc/adjtime)\n"
-#~ " --test do everything except actually updating the "
-#~ "hardware\n"
+#~ " --test do everything except actually updating the hardware\n"
#~ " clock or anything else\n"
#~ " -D | --debug debug mode\n"
#~ "\n"
#~ " --localtime 硬體時鐘保持為區域時間\n"
#~ " -f | --rtc=path 使用特殊 /dev/... 檔案以代替預設\n"
#~ " --directisa 直接存取 ISA 匯流排以代替 %s\n"
-#~ " --badyear 忽略 rtc 的年份，因為 bios 不完整\n"
+#~ " --badyear 忽略 rtc 的年分，因為 bios 不完整\n"
#~ " --date 指定時間為該項以設定硬體時鐘\n"
#~ " --epoch=year 指定硬體時鐘時期值\n"
-#~ " 的開始年份\n"
+#~ " 的開始年分\n"
#~ " --noadjfile 不存取 /etc/adjtime。需要使用\n"
#~ " --utc 抑或 --localtime\n"
#~ " --adjfile=路徑 指定路徑到調整檔案 (預設是\n"
#~ " -D | --debug 除錯模式\n"
#~ "\n"
+#~ msgid ""
+#~ "You have specified multiple functions.\n"
+#~ "You can only perform one function at a time.\n"
+#~ msgstr ""
+#~ "您已指定多重功能。\n"
+#~ "您只能一次實行一個功能。\n"
+
+#~ msgid "%s: The --utc and --localtime options are mutually exclusive. You specified both.\n"
+#~ msgstr "%s：--utc 和 --localtime 選項互斥。 您卻已指定兩者。\n"
+
+#~ msgid "%s: The --adjust and --noadjfile options are mutually exclusive. You specified both.\n"
+#~ msgstr "%s：--adjust 和 --noadjfile 選項互斥。 您卻已指定兩者。\n"
+
+#~ msgid "%s: The --adjfile and --noadjfile options are mutually exclusive. You specified both.\n"
+#~ msgstr "%s：--adjust 和 --noadjfile 選項互斥。 您卻已指定兩者。\n"
+
+#~ msgid "Open of %s failed"
+#~ msgstr "開啟 %s 時失敗"
+
#~ msgid "can't malloc initstring"
#~ msgstr "無法 malloc 初始字串"
-#, fuzzy
#~ msgid ""
-#~ "Usage: %s [-8hiLmsUw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] baud_rate,... line [termtype]\n"
-#~ "or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] line baud_rate,... [termtype]\n"
+#~ "Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n"
+#~ "or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n"
#~ msgstr ""
-#~ "用法：%s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] baud_rate,... line [termtype]\n"
-#~ "或\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] line baud_rate,... [termtype]\n"
+#~ "用法：%s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n"
+#~ "或\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n"
-#, fuzzy
-#~ msgid "Usage: %s [y | n]"
-#~ msgstr "用法：mesg [y | n]\n"
+#~ msgid "login: memory low, login may fail\n"
+#~ msgstr "登入：記憶體減少，登入也可能會失敗\n"
+
+#~ msgid "can't malloc for ttyclass"
+#~ msgstr "無法將 malloc 用於 ttyclass"
+
+#~ msgid "can't malloc for grplist"
+#~ msgstr "無法將 malloc 用於 grplist"
+
+#~ msgid "Login on %s from %s denied.\n"
+#~ msgstr "從 %2$s 到 %1$s 的登入被拒。\n"
+
+#~ msgid "Usage: %s [ -f full-name ] [ -o office ] "
+#~ msgstr "用法：%s [ -f full-name ] [ -o office ] "
+
+#~ msgid "[ --help ] [ --version ]\n"
+#~ msgstr "[ --help ] [ --version ]\n"
+
+#~ msgid ""
+#~ "Usage: %s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n"
+#~ " [ username ]\n"
+#~ msgstr ""
+#~ "用法：%s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n"
+#~ " [ username ]\n"
+
+#~ msgid "%s: Use -l option to see list.\n"
+#~ msgstr "%s：使用 -l 選項以參看列表\n"
+
+#~ msgid "Use %s -l to see list.\n"
+#~ msgstr "使用 %s -l 以參看列表。\n"
+
+#~ msgid "Failed to open %s for reading, exiting."
+#~ msgstr "開啟 %s 用於讀取時失敗，離開。"
+
+#~ msgid "last: malloc failure.\n"
+#~ msgstr "last：malloc 失敗。\n"
+
+#~ msgid "login: Out of memory\n"
+#~ msgstr "登入：記憶體不足\n"
+
+#~ msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
+#~ msgstr "從 %2$s 於 TTY %3$s 被拒絕登入 %1$s"
+
+#~ msgid "LOGIN %s REFUSED ON TTY %s"
+#~ msgstr "於 TTY %2$s 被拒絕登入 %1$s"
+
+#~ msgid "Login incorrect\n"
+#~ msgstr "登入不正確\n"
+
+#~ msgid "login: failure forking: %s"
+#~ msgstr "login：衍生程式失敗：%s"
+
+#~ msgid "login: no shell: %s.\n"
+#~ msgstr "login：無命令殼：%s。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "%s login: "
+#~ msgstr ""
+#~ "\n"
+#~ "%s login："
+
+#~ msgid "login name much too long.\n"
+#~ msgstr "登入名稱過長。\n"
+
+#~ msgid "NAME too long"
+#~ msgstr "名稱過長"
+
+#~ msgid "login names may not start with '-'.\n"
+#~ msgstr "登入名稱不可用「-」啟始。\n"
+
+#~ msgid "EXCESSIVE linefeeds"
+#~ msgstr "EXCESSIVE 換列字元"
+
+#~ msgid "LOGIN FAILURE FROM %s, %s"
+#~ msgstr "從 %s, %s 的登入失敗"
+
+#~ msgid "LOGIN FAILURE ON %s, %s"
+#~ msgstr "於 %s, %s 的登入失敗"
+
+#~ msgid "%d LOGIN FAILURES FROM %s, %s"
+#~ msgstr "%d 從 %s, %s 的登入失敗"
-#~ msgid "%s: BAD ERROR"
-#~ msgstr "%s：不當的錯誤"
+#~ msgid "%d LOGIN FAILURES ON %s, %s"
+#~ msgstr "%d 於 %s, %s 的登入失敗"
-#, fuzzy
-#~ msgid "usage: %s [-n] [file]\n"
-#~ msgstr "用法：%s [file]\n"
+#~ msgid "usage: mesg [y | n]\n"
+#~ msgstr "用法：mesg [y | n]\n"
-#~ msgid "can't read: %s"
-#~ msgstr "無法讀取：%s"
+#~ msgid "newgrp: setgid"
+#~ msgstr "newgrp：setgid"
-#~ msgid "logger: %s: %s.\n"
-#~ msgstr "logger：%s: %s。\n"
+#~ msgid "newgrp: Permission denied"
+#~ msgstr "newgrp：權限被拒"
-#~ msgid ""
-#~ "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] "
-#~ "[ message ... ]\n"
-#~ msgstr ""
-#~ "用法：logger [-is] [-f file] [-p pri] [-t tag] [-u socket] "
-#~ "[ message ... ]\n"
+#~ msgid "newgrp: setuid"
+#~ msgstr "newgrp：setuid"
-#~ msgid "usage: look [-dfa] [-t char] string [file]\n"
-#~ msgstr "用法：look [-dfa] [-t 字元] 字串 [檔案]\n"
+#~ msgid "Usage: shutdown [-h|-r] [-fqs] [now|hh:ss|+mins]\n"
+#~ msgstr "用法：shutdown [-h|-r] [-fqs] [now|hh：ss|+mins]\n"
-#~ msgid "out of memory?"
-#~ msgstr "記憶體不足？"
+#~ msgid "Shutdown process aborted"
+#~ msgstr "放棄關機行程"
-#~ msgid "call: %s from to files...\n"
-#~ msgstr "呼叫：%s 做為目標檔案…\n"
+#~ msgid "%s: Only root can shut a system down.\n"
+#~ msgstr "%s：只有 root 可以關閉系統。\n"
-#~ msgid "usage: script [-a] [-e] [-f] [-q] [-t] [file]\n"
-#~ msgstr "用法：script [-a] [-e] [-f] [-q] [-t] [檔案]\n"
+#~ msgid "That must be tomorrow, can't you wait till then?\n"
+#~ msgstr "那必須要到明天，您無法等到那時候嗎？\n"
-#~ msgid "%s: write error %d: %s\n"
-#~ msgstr "%s：寫入錯誤 %d：%s\n"
+#~ msgid "for maintenance; bounce, bounce"
+#~ msgstr "基於維護因素；跳開、跳開"
-#~ msgid "%s: write error: %s\n"
-#~ msgstr "%s：寫入錯誤：%s\n"
+#~ msgid "The system is being shut down within 5 minutes"
+#~ msgstr "系統將在五分鐘內關機"
-#~ msgid " [ -term terminal_name ]\n"
-#~ msgstr " [ -term terminal_name]\n"
+#~ msgid "Login is therefore prohibited."
+#~ msgstr "登入因而被禁止。"
-#~ msgid " [ -reset ]\n"
-#~ msgstr " [ -reset ]\n"
+#~ msgid "rebooted by %s: %s"
+#~ msgstr "重新開機命令來自 %s: %s"
-#~ msgid " [ -initialize ]\n"
-#~ msgstr " [ -initialize ]\n"
+#~ msgid "halted by %s: %s"
+#~ msgstr "終止命令來自 %s: %s"
-#~ msgid " [ -cursor [on|off] ]\n"
-#~ msgstr " [ -cursor [on|off] ]\n"
+#~ msgid ""
+#~ "\n"
+#~ "Why am I still alive after reboot?"
+#~ msgstr ""
+#~ "\n"
+#~ "為什麼重新開機之後我還在運行？"
-#~ msgid " [ -snow [on|off] ]\n"
-#~ msgstr " [ -snow [on|off] ]\n"
+#~ msgid ""
+#~ "\n"
+#~ "Now you can turn off the power..."
+#~ msgstr ""
+#~ "\n"
+#~ "現在您可以關閉電源…"
-#~ msgid " [ -softscroll [on|off] ]\n"
-#~ msgstr " [ -softscroll [on|off] ]\n"
+#~ msgid "Calling kernel power-off facility...\n"
+#~ msgstr "呼叫內核關機功能…\n"
-#~ msgid " [ -repeat [on|off] ]\n"
-#~ msgstr " [ -repeat [on|off] ]\n"
+#~ msgid "Error powering off\t%s\n"
+#~ msgstr "關閉電源時發生錯誤\t%s\n"
-#~ msgid " [ -appcursorkeys [on|off] ]\n"
-#~ msgstr " [ -appcursorkeys [on|off] ]\n"
+#~ msgid "Executing the program \"%s\" ...\n"
+#~ msgstr "正在執行程式「%s」…\n"
-#~ msgid " [ -linewrap [on|off] ]\n"
-#~ msgstr " [ -linewrap [on|off] ]\n"
+#~ msgid "URGENT: broadcast message from %s:"
+#~ msgstr "緊急：廣播訊息來自 %s："
-#~ msgid " [ -default ]\n"
-#~ msgstr " [ -default ]\n"
+#~ msgid "System going down in %d hours %d minutes"
+#~ msgstr "系統於 %d 小時 %d 分鐘後進行關機"
-#~ msgid " [ -foreground black|blue|green|cyan"
-#~ msgstr " [ -foreground black|blue|green|cyan"
+#~ msgid "System going down in 1 hour %d minutes"
+#~ msgstr "系統於 1 小時 %d 分鐘後進行關機"
-#~ msgid "|red|magenta|yellow|white|default ]\n"
-#~ msgstr "|red|magenta|yellow|white|default ]\n"
+#~ msgid "System going down in %d minutes\n"
+#~ msgstr "系統於 %d 分鐘後進行關機\n"
-#~ msgid " [ -background black|blue|green|cyan"
-#~ msgstr " [ -background black|blue|green|cyan"
+#~ msgid "System going down in 1 minute\n"
+#~ msgstr "系統於 1 分鐘後進行關機\n"
-#~ msgid " [ -ulcolor black|grey|blue|green|cyan"
-#~ msgstr " [ -ulcolor black|grey|blue|green|cyan"
+#~ msgid "System going down IMMEDIATELY!\n"
+#~ msgstr "系統即將進行關機！\n"
-#~ msgid "|red|magenta|yellow|white ]\n"
-#~ msgstr "|red|magenta|yellow|white ]\n"
+#~ msgid "\t... %s ...\n"
+#~ msgstr "\t… %s …\n"
-#~ msgid " [ -ulcolor bright blue|green|cyan"
-#~ msgstr " [ -ulcolor bright blue|green|cyan"
+#~ msgid "Cannot fork for swapoff. Shrug!"
+#~ msgstr "無法衍生執行 swapoff。沒輒！"
-#~ msgid " [ -hbcolor black|grey|blue|green|cyan"
-#~ msgstr " [ -hbcolor black|grey|blue|green|cyan"
+#~ msgid "Cannot exec swapoff, hoping umount will do the trick."
+#~ msgstr "無法執行 swapoff，希望 umount 能順便做到。"
-#~ msgid " [ -hbcolor bright blue|green|cyan"
-#~ msgstr " [ -hbcolor bright blue|green|cyan"
+#~ msgid "Cannot fork for umount, trying manually."
+#~ msgstr "無法衍生執行 umount，試著手動執行。"
-#~ msgid " [ -standout [ attr ] ]\n"
-#~ msgstr " [ -standout [ attr ] ]\n"
+#~ msgid "Cannot exec %s, trying umount.\n"
+#~ msgstr "無法執行 %s, 試著 umount。\n"
-#~ msgid " [ -inversescreen [on|off] ]\n"
-#~ msgstr " [ -inversescreen [on|off] ]\n"
+#~ msgid "Cannot exec umount, giving up on umount."
+#~ msgstr "無法執行 umount，放棄執行 umount。"
-#~ msgid " [ -bold [on|off] ]\n"
-#~ msgstr " [ -bold [on|off] ]\n"
+#~ msgid "Unmounting any remaining filesystems..."
+#~ msgstr "卸載任何還掛載的檔案系統…"
-#~ msgid " [ -half-bright [on|off] ]\n"
-#~ msgstr " [ -half-bright [on|off] ]\n"
+#~ msgid "shutdown: Couldn't umount %s: %s\n"
+#~ msgstr "shutdown：無法卸載 %s: %s\n"
-#~ msgid " [ -blink [on|off] ]\n"
-#~ msgstr " [ -blink [on|off] ]\n"
+#~ msgid "Booting to single user mode.\n"
+#~ msgstr "開機進入單一使用者模式。\n"
-#~ msgid " [ -reverse [on|off] ]\n"
-#~ msgstr " [ -reverse [on|off] ]\n"
+#~ msgid "exec of single user shell failed\n"
+#~ msgstr "單一使用者命令殼執行時失敗\n"
-#~ msgid " [ -underline [on|off] ]\n"
-#~ msgstr " [ -underline [on|off] ]\n"
+#~ msgid "fork of single user shell failed\n"
+#~ msgstr "單一使用者命令殼衍生執行時失敗\n"
-#~ msgid " [ -store ]\n"
-#~ msgstr " [ -store ]\n"
+#~ msgid "error opening fifo\n"
+#~ msgstr "開啟 fifo 時發生錯誤\n"
-#~ msgid " [ -clear [all|rest] ]\n"
-#~ msgstr " [ -clear [all|rest] ]\n"
+#~ msgid "error setting close-on-exec on /dev/initctl"
+#~ msgstr "於 /dev/initctl 設定 close-on-exec 時發生錯誤"
-#~ msgid " [ -tabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
-#~ msgstr " [ -tabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
+#~ msgid "error running finalprog\n"
+#~ msgstr "執行 finalprog 時發生錯誤\n"
-#~ msgid " [ -clrtabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
-#~ msgstr " [ -clrtabs [ tab1 tab2 tab3 ... ] ] (tabn = 1-160)\n"
+#~ msgid "error forking finalprog\n"
+#~ msgstr "衍生執行 finalprog 時發生錯誤\n"
-#~ msgid " [ -regtabs [1-160] ]\n"
-#~ msgstr " [ -regtabs [1-160] ]\n"
+#~ msgid ""
+#~ "\n"
+#~ "Wrong password.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "錯誤的密碼。\n"
-#~ msgid " [ -blank [0-60|force|poke] ]\n"
-#~ msgstr " [ -blank [0-60|force|poke] ]\n"
+#~ msgid "respawning: \"%s\" too fast: quenching entry\n"
+#~ msgstr "respawning：「%s」太快：停息項目\n"
-#~ msgid " [ -dump [1-NR_CONSOLES] ]\n"
-#~ msgstr " [ -dump [1-NR_CONSOLES] ]\n"
+#~ msgid "fork failed\n"
+#~ msgstr "衍生執行時失敗\n"
-#~ msgid " [ -append [1-NR_CONSOLES] ]\n"
-#~ msgstr " [ -append [1-NR_CONSOLES] ]\n"
+#~ msgid "cannot open inittab\n"
+#~ msgstr "無法開啟 inittab\n"
-#~ msgid " [ -file dumpfilename ]\n"
-#~ msgstr " [ -file dumpfilename ]\n"
+#~ msgid "no TERM or cannot stat tty\n"
+#~ msgstr "沒有 TERM 或無法取得 tty 狀態\n"
-#~ msgid " [ -msg [on|off] ]\n"
-#~ msgstr " [ -msg [on|off] ]\n"
+#~ msgid "error at stopping service \"%s\"\n"
+#~ msgstr "於停止服務「%s」時發生錯誤\n"
-#~ msgid " [ -msglevel [0-8] ]\n"
-#~ msgstr " [ -msglevel [0-8] ]\n"
+#~ msgid "Stopped service: %s\n"
+#~ msgstr "停止的服務：%s\n"
-#~ msgid " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
-#~ msgstr " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
+#~ msgid "error at starting service \"%s\"\n"
+#~ msgstr "於開始服務「%s」時發生錯誤\n"
-#~ msgid " [ -powerdown [0-60] ]\n"
-#~ msgstr " [ -powerdown [0-60] ]\n"
+#~ msgid "%s: BAD ERROR"
+#~ msgstr "%s：不當的錯誤"
-#~ msgid " [ -blength [0-2000] ]\n"
-#~ msgstr " [ -blength [0-2000] ]\n"
+#~ msgid "%s: the group file is busy.\n"
+#~ msgstr "%s：群組檔案忙碌中。\n"
-#~ msgid " [ -bfreq freqnumber ]\n"
-#~ msgstr " [ -bfreq 頻率數 ]\n"
+#~ msgid "%s: the %s file is busy (%s present)\n"
+#~ msgstr "%s: %s 檔案忙碌中 (目前 %s)\n"
-#~ msgid "Usage: %s [-d] [-p pidfile] [-s socketpath] [-T timeout]\n"
-#~ msgstr "用法：%s [-d] [-p pidfile] [-s 通訊端路徑] [-T 逾時]\n"
+#~ msgid "%s: can't unlock %s: %s (your changes are still in %s)\n"
+#~ msgstr "%s：無法解除鎖定 %s: %s (您的變更是仍然在 %s 中)\n"
-#~ msgid " %s [-r|t] [-n num] [-s socketpath]\n"
-#~ msgstr " %s [-r|t] [-n num] [-s 通訊端路徑]\n"
+#~ msgid "%s: Cannot fork\n"
+#~ msgstr "%s：無法衍生執行\n"
-#~ msgid " %s -k\n"
-#~ msgstr " %s -k\n"
+#~ msgid "usage: %s [file]\n"
+#~ msgstr "用法：%s [file]\n"
-#~ msgid "Usage: %s [-r] [-t]\n"
-#~ msgstr "用法：%s [-r] [-t]\n"
+#~ msgid "%s: can't read %s.\n"
+#~ msgstr "%s：無法讀取 %s。\n"
-#~ msgid "whereis [ -sbmu ] [ -SBM dir ... -f ] name...\n"
-#~ msgstr "whereis [ -sbmu ] [ -SBM 目錄 ... -f ] 名稱...\n"
+#~ msgid "%s: can't stat temporary file.\n"
+#~ msgstr "%s：無法取得暫存檔狀態。\n"
-#~ msgid "usage: write user [tty]\n"
-#~ msgstr "用法：write user [tty]\n"
+#~ msgid "%s: can't read temporary file.\n"
+#~ msgstr "%s：無法讀取暫存檔。\n"
-#~ msgid "mount: can't open %s: %s"
-#~ msgstr "mount：無法開啟 %s: %s"
+#~ msgid "usage: cal [-13smjyV] [[[day] month] year]\n"
+#~ msgstr "用法：cal [-13smjyV] [[[日] 月] 年]\n"
-#~ msgid "unknown\n"
-#~ msgstr "不明\n"
+#~ msgid "%s: parse error: %s"
+#~ msgstr "%s：剖析錯誤：%s"
#~ msgid ""
#~ "\n"
-#~ "ionice - sets or gets process io scheduling class and priority.\n"
-#~ "\n"
-#~ "Usage:\n"
-#~ " ionice [ options ] -p <pid> [<pid> ...]\n"
-#~ " ionice [ options ] <command> [<arg> ...]\n"
-#~ "\n"
#~ "Options:\n"
-#~ " -n <classdata> class data (0-7, lower being higher prio)\n"
-#~ " -c <class> scheduling class\n"
-#~ " 0: none, 1: realtime, 2: best-effort, 3: idle\n"
-#~ " -t ignore failures\n"
-#~ " -h this help\n"
-#~ "\n"
-#~ msgstr ""
+#~ " -s, --fstab search in static table of filesystems\n"
+#~ " -m, --mtab search in table of mounted filesystems\n"
+#~ " -k, --kernel search in kernel table of mounted \n"
+#~ " filesystems (default)\n"
#~ "\n"
-#~ "ionice - 設定或取得進程 io 排程類別和優先權。\n"
+#~ " -c, --canonicalize canonicalize printed paths\n"
+#~ " -d, --direction <word> search direction - 'forward' or 'backward'\n"
+#~ " -e, --evaluate print all TAGs (LABEL/UUID) evaluated\n"
+#~ " -f, --first-only print the first found filesystem only\n"
+#~ " -h, --help print this help\n"
+#~ " -i, --invert invert sense of matching\n"
+#~ " -l, --list use list format ouput\n"
+#~ " -n, --noheadings don't print headings\n"
+#~ " -u, --notruncate don't truncate text in columns\n"
+#~ " -O, --options <list> limit the set of filesystems by mount options\n"
+#~ " -o, --output <list> output columns\n"
+#~ " -r, --raw use raw format output\n"
+#~ " -a, --ascii use ascii chars for tree formatting\n"
+#~ " -t, --types <list> limit the set of filesystem by FS types\n"
+#~ " -S, --source <string> device, LABEL= or UUID=device\n"
+#~ " -T, --target <string> mountpoint\n"
#~ "\n"
-#~ "用法：\n"
-#~ " ionice [選項] -p <pid> [<pid>...]\n"
-#~ " ionice [選項] <command> [<arg>...]\n"
+#~ msgstr ""
#~ "\n"
#~ "選項：\n"
-#~ " -n <classdata> 類別資料 (0-7, 較低者有較高優先權)\n"
-#~ " -c <class> 排程類別\n"
-#~ " 0:無，1:即時，2:盡力，3:閒置\n"
-#~ " -t 忽略失敗\n"
-#~ " -h 這個說明\n"
+#~ " -s, --fstab 在檔案系統的靜態表格中搜尋\n"
+#~ " -m, --mtab 在掛載檔案系統的表格中搜尋\n"
+#~ " -k, --kernel 在掛載檔案系統的內核表格中\n"
+#~ " 搜尋 (預設)\n"
+#~ "\n"
+#~ " -c, --canonicalize 正則化印出路徑\n"
+#~ " -d, --direction <word> 搜尋方向 - 'forward' 或 'backward'\n"
+#~ " -e, --evaluate 印出所有已求值標記 (LABEL/UUID)\n"
+#~ " -f, --first-only 只印出第一個找到的檔案系統\n"
+#~ " -h, --help 印出這個說明\n"
+#~ " -i, --invert 反向符合方式\n"
+#~ " -l, --list 使用清單格式輸出\n"
+#~ " -n, --noheadings 不列印標頭\n"
+#~ " -u, --notruncate 不截斷直欄中的文字\n"
+#~ " -O, --options <list> 依掛載選項限制檔案系統集合\n"
+#~ " -o, --output <list> 輸出直欄\n"
+#~ " -r, --raw 使用原始格式輸出\n"
+#~ " -a, --ascii 使用 ascii 字元於樹狀格式化\n"
+#~ " -t, --types <list> 依檔案系統類型限制檔案系統集合\n"
+#~ " -S, --source <string> 裝置、LABEL= 或 UUID=裝置\n"
+#~ " -T, --target <string> 掛載點\n"
#~ "\n"
-#~ msgid "CPU mask"
-#~ msgstr "CPU 遮罩"
+#~ msgid ""
+#~ "\n"
+#~ "For more information see findmnt(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 findmnt(1)。\n"
-#~ msgid "Usage: shutdown [-h|-r] [-fqs] [now|hh:ss|+mins]\n"
-#~ msgstr "用法：shutdown [-h|-r] [-fqs] [now|hh：ss|+mins]\n"
+#~ msgid "logger: %s: %s.\n"
+#~ msgstr "logger：%s: %s。\n"
-#~ msgid "Shutdown process aborted"
-#~ msgstr "放棄關機進程"
+#~ msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n"
+#~ msgstr "用法：logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message … ]\n"
-#, fuzzy
-#~ msgid "only root can shut a system down."
-#~ msgstr "%s：只有 root 可以關閉系統。\n"
+#~ msgid "usage: look [-dfa] [-t char] string [file]\n"
+#~ msgstr "用法：look [-dfa] [-t 字元] 字串 [檔案]\n"
-#, fuzzy
-#~ msgid "that must be tomorrow, can't you wait till then?"
-#~ msgstr "那必須要到明天，您無法等到那時候嗎？\n"
+#~ msgid "Could not open %s\n"
+#~ msgstr "無法開啟 %s\n"
-#~ msgid "for maintenance; bounce, bounce"
-#~ msgstr "基於維護因素；跳開、跳開"
+#~ msgid "out of memory?"
+#~ msgstr "記憶體不足？"
-#~ msgid "The system is being shut down within 5 minutes"
-#~ msgstr "系統將在五分鐘內關機"
+#~ msgid "%s: out of memory\n"
+#~ msgstr "%s：記憶體用盡\n"
-#~ msgid "Login is therefore prohibited."
-#~ msgstr "登入因而被禁止。"
+#~ msgid "call: %s from to files...\n"
+#~ msgstr "呼叫：%s 做為目標檔案…\n"
-#~ msgid "rebooted by %s: %s"
-#~ msgstr "重新開機命令來自 %s: %s"
+#~ msgid "usage: script [-a] [-e] [-f] [-q] [-t] [file]\n"
+#~ msgstr "用法：script [-a] [-e] [-f] [-q] [-t] [檔案]\n"
-#~ msgid "halted by %s: %s"
-#~ msgstr "終止命令來自 %s: %s"
+#~ msgid "%s: write error %d: %s\n"
+#~ msgstr "%s：寫入錯誤 %d：%s\n"
-#~ msgid ""
-#~ "\n"
-#~ "Why am I still alive after reboot?"
-#~ msgstr ""
-#~ "\n"
-#~ "為什麼重新開機之後我還在運行？"
+#~ msgid " [ -snow [on|off] ]\n"
+#~ msgstr " [ -snow [on|off] ]\n"
-#~ msgid ""
-#~ "\n"
-#~ "Now you can turn off the power..."
-#~ msgstr ""
-#~ "\n"
-#~ "現在您可以關閉電源…"
+#~ msgid " [ -softscroll [on|off] ]\n"
+#~ msgstr " [ -softscroll [on|off] ]\n"
-#~ msgid "Calling kernel power-off facility...\n"
-#~ msgstr "呼叫內核關機功能…\n"
+#~ msgid " [ -foreground black|blue|green|cyan"
+#~ msgstr " [ -foreground black|blue|green|cyan"
-#~ msgid "Error powering off\t%s\n"
-#~ msgstr "關閉電源時發生錯誤\t%s\n"
+#~ msgid "|red|magenta|yellow|white|default ]\n"
+#~ msgstr "|red|magenta|yellow|white|default ]\n"
-#~ msgid "Executing the program \"%s\" ...\n"
-#~ msgstr "正在執行程式「%s」…\n"
+#~ msgid " [ -background black|blue|green|cyan"
+#~ msgstr " [ -background black|blue|green|cyan"
-#~ msgid "Error executing\t%s\n"
-#~ msgstr "發生錯誤於執行\t%s\n"
+#~ msgid " [ -ulcolor black|grey|blue|green|cyan"
+#~ msgstr " [ -ulcolor black|grey|blue|green|cyan"
-#~ msgid "URGENT: broadcast message from %s:"
-#~ msgstr "緊急：廣播訊息來自 %s："
+#~ msgid "|red|magenta|yellow|white ]\n"
+#~ msgstr "|red|magenta|yellow|white ]\n"
-#~ msgid "System going down in %d hours %d minutes"
-#~ msgstr "系統於 %d 小時 %d 分鐘後進行關機"
+#~ msgid " [ -ulcolor bright blue|green|cyan"
+#~ msgstr " [ -ulcolor bright blue|green|cyan"
-#~ msgid "System going down in 1 hour %d minutes"
-#~ msgstr "系統於 1 小時 %d 分鐘後進行關機"
+#~ msgid " [ -hbcolor black|grey|blue|green|cyan"
+#~ msgstr " [ -hbcolor black|grey|blue|green|cyan"
-#~ msgid "System going down in %d minutes\n"
-#~ msgstr "系統於 %d 分鐘後進行關機\n"
+#~ msgid " [ -hbcolor bright blue|green|cyan"
+#~ msgstr " [ -hbcolor bright blue|green|cyan"
-#~ msgid "System going down in 1 minute\n"
-#~ msgstr "系統於 1 分鐘後進行關機\n"
+#~ msgid " [ -standout [ attr ] ]\n"
+#~ msgstr " [ -standout [ attr ] ]\n"
-#~ msgid "System going down IMMEDIATELY!\n"
-#~ msgstr "系統å\8d³å°\87é\80²è¡\8cé\97\9cæ©\9fï¼\81\n"
+#~ msgid "Usage: %s [-d] [-p pidfile] [-s socketpath] [-T timeout]\n"
+#~ msgstr "ç\94¨æ³\95ï¼\9a%s [-d] [-p pidfile] [-s é\80\9aè¨\8a端路å¾\91] [-T é\80¾æ\99\82]\n"
-#~ msgid "\t... %s ...\n"
-#~ msgstr "\t… %s …\n"
+#~ msgid " %s [-r|t] [-n num] [-s socketpath]\n"
+#~ msgstr " %s [-r|t] [-n num] [-s 通訊端路徑]\n"
-#~ msgid "Cannot fork for swapoff. Shrug!"
-#~ msgstr "無法衍生執行 swapoff。沒輒！"
+#~ msgid " %s -k\n"
+#~ msgstr " %s -k\n"
-#~ msgid "Cannot exec swapoff, hoping umount will do the trick."
-#~ msgstr "ç\84¡æ³\95å\9f·è¡\8c swapoffï¼\8cå¸\8cæ\9c\9b umount è\83½é \86便å\81\9aå\88°ã\80\82"
+#~ msgid "Usage: %s [-r] [-t]\n"
+#~ msgstr "ç\94¨æ³\95ï¼\9a%s [-r] [-t]\n"
-#~ msgid "Cannot fork for umount, trying manually."
-#~ msgstr "無法衍生執行 umount，試著手動執行。"
+#~ msgid "whereis [ -sbmu ] [ -SBM dir ... -f ] name...\n"
+#~ msgstr "whereis [ -sbmu ] [ -SBM 目錄 … -f ] 名稱…\n"
-#~ msgid "Cannot exec %s, trying umount.\n"
-#~ msgstr "無法執行 %s, 試著 umount。\n"
+#~ msgid "WARNING: %s: appears to contain '%s' partition table"
+#~ msgstr "警告：%s：似乎包含「%s」分割表"
-#~ msgid "Cannot exec umount, giving up on umount."
-#~ msgstr "無法執行 umount，放棄執行 umount。"
+#~ msgid "no magic string found at offset 0x%jx -- ignored"
+#~ msgstr "找不到任何魔術字串於偏移值 0x%jx -- 忽略"
-#~ msgid "Unmounting any remaining filesystems..."
-#~ msgstr "卸載任何還掛載的檔案系統…"
+#~ msgid "invalid offset value '%s' specified"
+#~ msgstr "指定了無效的偏移值「%s」"
-#~ msgid "shutdown: Couldn't umount %s: %s\n"
-#~ msgstr "shutdown：無法卸載 %s: %s\n"
+#~ msgid "usage: write user [tty]\n"
+#~ msgstr "用法：write user [tty]\n"
-#~ msgid "Booting to single user mode.\n"
-#~ msgstr "開機進入單一使用者模式。\n"
+#~ msgid "loop: can't set capacity on device %s: %s\n"
+#~ msgstr "loop：無法設定裝置上的容量 %s：%s\n"
-#~ msgid "exec of single user shell failed\n"
-#~ msgstr "單一使用者命令殼執行時失敗\n"
+#~ msgid ", offset %<PRIu64>"
+#~ msgstr "，偏移值 %<PRIu64>"
-#~ msgid "fork of single user shell failed\n"
-#~ msgstr "單一使用者命令殼衍生執行時失敗\n"
+#~ msgid ", encryption type %d\n"
+#~ msgstr "，加密類型 %d\n"
-#~ msgid "error opening fifo\n"
-#~ msgstr "開啟 fifo 時發生錯誤\n"
+#~ msgid "loop: can't get info on device %s: %s\n"
+#~ msgstr "loop：無法取得裝置上的資訊 %s: %s\n"
-#~ msgid "error setting close-on-exec on /dev/initctl"
-#~ msgstr "於 /dev/initctl 設定 close-on-exec 時發生錯誤"
+#~ msgid "loop: can't open device %s: %s\n"
+#~ msgstr "loop：無法開啟裝置 %s: %s\n"
-#~ msgid "error running finalprog\n"
-#~ msgstr "執行 finalprog 時發生錯誤\n"
+#~ msgid "%s: /dev directory does not exist."
+#~ msgstr "%s：/dev 目錄不存在。"
-#~ msgid "error forking finalprog\n"
-#~ msgstr "衍生執行 finalprog 時發生錯誤\n"
+#~ msgid "%s: no permission to look at /dev/loop%s<N>"
+#~ msgstr "%s：無權限可查看 /dev/loop%s<N>"
#~ msgid ""
-#~ "\n"
-#~ "Wrong password.\n"
+#~ "%s: Could not find any loop device. Maybe this kernel does not know\n"
+#~ " about the loop device? (If so, recompile or `modprobe loop'.)"
#~ msgstr ""
-#~ "\n"
-#~ "錯誤的密碼。\n"
-
-#~ msgid "lstat of path failed\n"
-#~ msgstr "路徑 lstat 時失敗\n"
-
-#~ msgid "open of directory failed\n"
-#~ msgstr "目錄開啟時失敗\n"
-
-#~ msgid "respawning: \"%s\" too fast: quenching entry\n"
-#~ msgstr "respawning：「%s」太快：停息項目\n"
-
-#~ msgid "fork failed\n"
-#~ msgstr "衍生執行時失敗\n"
-
-#~ msgid "cannot open inittab\n"
-#~ msgstr "無法開啟 inittab\n"
-
-#~ msgid "no TERM or cannot stat tty\n"
-#~ msgstr "沒有 TERM 或無法取得 tty 狀態\n"
+#~ "%s：找不到任何環路裝置。也許這個內核不認識\n"
+#~ " 什麼是環路裝置？(如果是這樣，請重新編譯或執行「modprobe loop」。)"
-#~ msgid "error at stopping service \"%s\"\n"
-#~ msgstr "於停止服務「%s」時發生錯誤\n"
+#~ msgid "Out of memory while reading passphrase"
+#~ msgstr "讀取密語時記憶體不足"
-#~ msgid "Stopped service: %s\n"
-#~ msgstr "停止的服務：%s\n"
+#~ msgid "warning: %s is already associated with %s\n"
+#~ msgstr "警告：%s 已經和 %s 相關聯\n"
-#~ msgid "error at starting service \"%s\"\n"
-#~ msgstr "於開始服務「%s」時發生錯誤\n"
+#~ msgid "warning: %s: is write-protected, using read-only.\n"
+#~ msgstr "警告：%s：為防寫，使用唯讀。\n"
-#~ msgid "Usage: %s [-c] [-n level] [-r] [-s bufsize]\n"
-#~ msgstr "用法：%s [-c] [-n 等級] [-r] [-s 緩衝區大小]\n"
+#~ msgid "ioctl LOOP_SET_FD failed: %s\n"
+#~ msgstr "ioctl LOOP_SET_FD 失敗：%s\n"
-#~ msgid "error: strdup failed"
-#~ msgstr "錯誤：strdup 失敗"
+#~ msgid "set_loop(%s,%s,%llu,%llu): success\n"
+#~ msgstr "set_loop(%s,%s,%llu,%llu)：成功\n"
-#~ msgid "error: calloc failed"
-#~ msgstr "錯誤：calloc 失敗"
+#~ msgid "del_loop(%s): success\n"
+#~ msgstr "del_loop(%s)：成功\n"
-#, fuzzy
-#~ msgid "usage: %s [-bfpx] [-l nline]"
-#~ msgstr "用法：col [-bfpx] [-l 列數]\n"
+#~ msgid "loop: can't delete device %s: %s\n"
+#~ msgstr "loop：無法刪除裝置 %s: %s\n"
-#~ msgid "usage: %s [ - ] [ -2 ] [ file ... ]\n"
-#~ msgstr "用法：%s [ - ] [ -2 ] [檔案…]\n"
+#~ msgid "This mount was compiled without loop support. Please recompile.\n"
+#~ msgstr "這個 mount 程式編譯時不具環路支援。請重新編譯。\n"
#~ msgid ""
-#~ "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] "
-#~ "[file ...]\n"
+#~ "\n"
+#~ "Usage:\n"
+#~ " %1$s loop_device give info\n"
+#~ " %1$s -a | --all list all used\n"
+#~ " %1$s -d | --detach <loopdev> [<loopdev> ...] delete\n"
+#~ " %1$s -f | --find find unused\n"
+#~ " %1$s -c | --set-capacity <loopdev> resize\n"
+#~ " %1$s -j | --associated <file> [-o <num>] list all associated with <file>\n"
+#~ " %1$s [ options ] {-f|--find|loopdev} <file> setup\n"
#~ msgstr ""
-#~ "hexdump：[-bcCdovx] [-e 格式] [-f 格式檔案] [-n 長度] [-s 跳過] [檔"
-#~ "案 ...]\n"
-
-#~ msgid "usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n"
-#~ msgstr "用法：%s [-dflpcsu] [+列號 | +/式樣] 名稱一 名稱二…\n"
+#~ "\n"
+#~ "用法：\n"
+#~ " %1$s loop_device 提供資訊\n"
+#~ " %1$s -a | --all 列出所有已用的\n"
+#~ " %1$s -d | --detach <loopdev> [<loopdev>...] 刪除\n"
+#~ " %1$s -f | --find 尋找未使用的\n"
+#~ " %1$s -c | --set-capacity <loopdev> 調整大小\n"
+#~ " %1$s -j | --associated <file>[-o <num>] 列出所有與 <file> 相關聯的\n"
+#~ " %1$s [選項] {-f|--find|loopdev} <file> 設定\n"
-#~ msgid "failed to initialize line buffer\n"
-#~ msgstr "初始化列緩衝區時失敗\n"
+#~ msgid "%s: invalid offset '%s' specified"
+#~ msgstr "%s：指定了無效的偏移值「%s」"
-#~ msgid "hexdump: can't read %s.\n"
-#~ msgstr "hexdump：無法讀取 %s。\n"
+#~ msgid "%s: invalid sizelimit '%s' specified"
+#~ msgstr "%s：指定了無效的大小限制「%s」"
-#~ msgid "hexdump: line too long.\n"
-#~ msgstr "hexdump：列太長。\n"
+#~ msgid "stolen loop=%s...trying again\n"
+#~ msgstr "丟失的環路=%s…再試一次\n"
-#, fuzzy
-#~ msgid "Usage: %s [file ...]\n"
-#~ msgstr "用法：%s [file]\n"
+#~ msgid "No loop support was available at compile time. Please recompile.\n"
+#~ msgstr "編譯時期就已不支援環路。請重新編譯。\n"
-#, fuzzy
-#~ msgid "realloc failed"
-#~ msgstr "malloc 失敗"
+#~ msgid "mount: can't open %s: %s"
+#~ msgstr "mount：無法開啟 %s: %s"
-#~ msgid "usage: tailf [-n N | -N] logfile"
-#~ msgstr "用法：tailf [-n N | -N] 日誌檔案"
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %1$s -a [-e] [-v] [-f] enable all swaps from /etc/fstab\n"
+#~ " %1$s [-p priority] [-v] [-f] <special> enable given swap\n"
+#~ " %1$s -s display swap usage summary\n"
+#~ " %1$s -h display help\n"
+#~ " %1$s -V display version\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %1$s -a [-e] [-v] [-f] 從 /etc/fstab 啟用全部交換區\n"
+#~ " %1$s [-p 優先權] [-v] [-f] <special> 啟用給定交換區\n"
+#~ " %1$s -s 顯示交換區用法概要\n"
+#~ " %1$s -h 顯示說明\n"
+#~ " %1$s -V 顯示版本\n"
+#~ "\n"
-#, fuzzy
-#~ msgid "Usage: %s [ -i ] [ -tTerm ] file...\n"
-#~ msgstr "用法：%s [ -i ] [ -tTerm ] 檔案…\n"
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %1$s -a [-v] disable all swaps\n"
+#~ " %1$s [-v] <special> disable given swap\n"
+#~ " %1$s -h display help\n"
+#~ " %1$s -V display version\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %1$s -a [-v] 停用所有交換區\n"
+#~ " %1$s [-v] <special> 停用給定的交換區\n"
+#~ " %1$s -h 顯示說明\n"
+#~ " %1$s -V 顯示版本\n"
+#~ "\n"
-#~ msgid "Unable to open %s\n"
-#~ msgstr "無法開啟 %s\n"
+#~ msgid "'%s' is unsupported program name (must be 'swapon' or 'swapoff')."
+#~ msgstr "「%s」為不受支援的程式名稱 (必須是「swapon」或「swapoff」)。"
-#~ msgid "Unable to allocate any more memory\n"
-#~ msgstr "無法配置更多的記憶體\n"
+#~ msgid "unknown\n"
+#~ msgstr "不明\n"
#~ msgid ""
#~ "\n"
-#~ "got EOF thrice - exiting..\n"
+#~ "ionice - sets or gets process io scheduling class and priority.\n"
+#~ "\n"
+#~ "Usage:\n"
+#~ " ionice [ options ] -p <pid> [<pid> ...]\n"
+#~ " ionice [ options ] <command> [<arg> ...]\n"
+#~ "\n"
+#~ "Options:\n"
+#~ " -n <classdata> class data (0-7, lower being higher prio)\n"
+#~ " -c <class> scheduling class\n"
+#~ " 0: none, 1: realtime, 2: best-effort, 3: idle\n"
+#~ " -t ignore failures\n"
+#~ " -h this help\n"
+#~ "\n"
#~ msgstr ""
#~ "\n"
-#~ "得到 EOF 三次 - 離開中..\n"
+#~ "ionice - 設定或取得行程 io 排程類別和優先權。\n"
+#~ "\n"
+#~ "用法：\n"
+#~ " ionice [選項] -p <pid> [<pid>...]\n"
+#~ " ionice [選項] <command> [<arg>...]\n"
+#~ "\n"
+#~ "選項：\n"
+#~ " -n <classdata> 類別資料 (0-7, 較低者有較高優先權)\n"
+#~ " -c <class> 排程類別\n"
+#~ " 0:無，1:即時，2:盡力，3:閒置\n"
+#~ " -t 忽略失敗\n"
+#~ " -h 這個說明\n"
+#~ "\n"
-#~ msgid "Partition ends in the final partial cylinder"
-#~ msgstr "分割區結尾在最後部份磁柱"
+#~ msgid "CPU mask"
+#~ msgstr "CPU 遮罩"
-#~ msgid "last: malloc failure.\n"
-#~ msgstr "last：malloc 失敗。\n"
+#~ msgid " and %d."
+#~ msgstr " 和 %d。"
-#~ msgid "last: gethostname"
-#~ msgstr "last：gethostname"
+#~ msgid "Usage: ctrlaltdel hard|soft\n"
+#~ msgstr "用法：ctrlaltdel hard|soft\n"
-#~ msgid "login: Out of memory\n"
-#~ msgstr "ç\99»å\85¥ï¼\9aè¨\98æ\86¶é«\94ä¸\8d足\n"
+#~ msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n"
+#~ msgstr "ç\94¨æ³\95ï¼\9a%s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [fileâ\80¦]\n"
-#~ msgid "No directory %s!\n"
-#~ msgstr "ç\9b®é\8c\84 %s ä¸\8då\98å\9c¨ï¼\81\n"
+#~ msgid "Can't open %s: %s\n"
+#~ msgstr "ç\84¡æ³\95é\96\8bå\95\9f %s: %s\n"
-#~ msgid "login: no memory for shell script.\n"
-#~ msgstr "login：無記憶體可用於命令稿。\n"
+#~ msgid "Usage: %s [-c] [-n level] [-r] [-s bufsize]\n"
+#~ msgstr "用法：%s [-c] [-n 等級] [-r] [-s 緩衝區大小]\n"
-#~ msgid "login: no shell: %s.\n"
-#~ msgstr "login：無命令殼：%s。\n"
+#~ msgid ""
+#~ "Usage: %1$s [-sxun][-w #] fd#\n"
+#~ " %1$s [-sxon][-w #] file [-c] command...\n"
+#~ " %1$s [-sxon][-w #] directory [-c] command...\n"
+#~ " -s --shared Get a shared lock\n"
+#~ " -x --exclusive Get an exclusive lock\n"
+#~ " -u --unlock Remove a lock\n"
+#~ " -n --nonblock Fail rather than wait\n"
+#~ " -w --timeout Wait for a limited amount of time\n"
+#~ " -o --close Close file descriptor before running command\n"
+#~ " -c --command Run a single command string through the shell\n"
+#~ " -h --help Display this text\n"
+#~ " -V --version Display version\n"
+#~ msgstr ""
+#~ "用法：%1$s [-sxun ][-w #] fd#\n"
+#~ " %1$s [-sxon ][-w #] 檔案 [-c] 命令…\n"
+#~ " %1$s [-sxon ][-w #] 目錄 [-c] 命令…\n"
+#~ " -s --shared 取得共享的鎖定\n"
+#~ " -x --exclusive 取得專用的鎖定\n"
+#~ " -u --unlock 移除鎖定\n"
+#~ " -n --nonblock 失敗而不是等待\n"
+#~ " -w --timeout 等待一段受限制的時間\n"
+#~ " -o --close 執行命令之前關閉檔案描述符號\n"
+#~ " -c --command 透過命令殼執行單一命令字串\n"
+#~ " -h --help 顯示這個說明\n"
+#~ " -V --version 顯示版本\n"
-#~ msgid "newgrp: setgid"
-#~ msgstr "newgrp：setgid"
+#~ msgid "%s: bad number: %s\n"
+#~ msgstr "%s：不當的數字：%s\n"
-#~ msgid "newgrp: Permission denied"
-#~ msgstr "newgrp：權限被拒"
+#~ msgid "%s: fork failed: %s\n"
+#~ msgstr "%s：衍生執行時失敗：%s\n"
-#~ msgid "newgrp: setuid"
-#~ msgstr "newgrp：setuid"
+#~ msgid "%s: fstat failed"
+#~ msgstr "%s：fstat 失敗"
-#~ msgid "%s: Cannot fork\n"
-#~ msgstr "%s：無法衍生執行\n"
+#~ msgid ""
+#~ " -M <size> create shared memory segment of size <size>\n"
+#~ " -S <nsems> create semaphore array with <nsems> elements\n"
+#~ " -Q create message queue\n"
+#~ " -p <mode> permission for the resource (default is 0644)\n"
+#~ msgstr ""
+#~ " -M <size> 以 <size> 大小建立共用記憶體資料段\n"
+#~ " -S <nsems> 以 <nsems> 元件建立號誌陣列\n"
+#~ " -Q 建立訊息佇列\n"
+#~ " -p <mode> 用於資源的權限 (預設是 0644)\n"
-#~ msgid "%s: can't read %s.\n"
-#~ msgstr "%s：無法讀取 %s。\n"
+#~ msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
+#~ msgstr "不宜用法：%s {shm | msg | sem} id …\n"
-#~ msgid "%s: can't stat temporary file.\n"
-#~ msgstr "%s：無法取得暫存檔狀態。\n"
+#~ msgid ""
+#~ "usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
+#~ " [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
+#~ msgstr ""
+#~ "用法：%s [ [-q msqid] [-m shmid] [-s semid]\n"
+#~ " [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
-#~ msgid "%s: can't read temporary file.\n"
-#~ msgstr "%s：無法讀取暫存檔。\n"
+#~ msgid "%s: illegal option -- %c\n"
+#~ msgstr "%s：不合法的選項 ─ %c\n"
-#~ msgid "%s: parse error: %s"
-#~ msgstr "%s：剖析錯誤：%s"
+#~ msgid "unknown error in key"
+#~ msgstr "鍵值發生不明錯誤"
-#~ msgid "%s: out of memory\n"
-#~ msgstr "%s：記憶體用盡\n"
+#~ msgid "unknown error in id"
+#~ msgstr "識別號發生不明錯誤"
-#~ msgid "cannot parse number '%s'"
-#~ msgstr "無法剖析數字「%s」"
+#~ msgid "%s: %s (%s)\n"
+#~ msgstr "%s: %s (%s)\n"
-#~ msgid "parse error at lines: "
-#~ msgstr "剖析錯誤發生於列號："
+#~ msgid ""
+#~ "Usage: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
+#~ " %1$s [-s|-m|-q] -i id\n"
+#~ " %1$s -h for help\n"
+#~ msgstr ""
+#~ "用法：%1$s [-asmq] [-t|-c|-l|-u|-p]\n"
+#~ " %1$s [-s|-m|-q] -i 識別號\n"
+#~ " %1$s -h 以獲得說明\n"
-#~ msgid " and %d."
-#~ msgstr " 和 %d。"
+#~ msgid ""
+#~ "Resource options:\n"
+#~ " -m shared memory segments\n"
+#~ " -q message queues\n"
+#~ " -s semaphores\n"
+#~ " -a all (default)\n"
+#~ "\n"
+#~ msgstr ""
+#~ "資源選項：\n"
+#~ " -m 共用記憶體資料段\n"
+#~ " -q 訊息佇列\n"
+#~ " -s 號誌\n"
+#~ " -a 全部 (預設)\n"
+#~ "\n"
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s：不合法的選項 ─ %c\n"
+#~ msgid ""
+#~ "Output format:\n"
+#~ " -t time\n"
+#~ " -p pid\n"
+#~ " -c creator\n"
+#~ " -l limits\n"
+#~ " -u summary\n"
+#~ msgstr ""
+#~ "輸出格式：\n"
+#~ " -t 時間\n"
+#~ " -p pid\n"
+#~ " -c 建立者\n"
+#~ " -l 限度\n"
+#~ " -u 概要\n"
#~ msgid "segments allocated %d\n"
#~ msgstr "已配置資料段 %d\n"
#~ msgid "pages resident %ld\n"
#~ msgstr "常駐記憶體頁 %ld\n"
-#~ msgid "pages swapped %ld\n"
-#~ msgstr "已交換記憶體頁 %ld\n"
-
#~ msgid "Swap performance: %ld attempts\t %ld successes\n"
#~ msgstr "交換效能：%ld 次嘗試\t%ld 次成功\n"
+#~ msgid ""
+#~ "\n"
+#~ "Usage: %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：%s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
+
+#~ msgid "ldattach from %s\n"
+#~ msgstr "ldattach 自 %s\n"
+
+#~ msgid "error: cannot open %s"
+#~ msgstr "錯誤：無法開啟 %s"
+
+#~ msgid "error: strdup failed"
+#~ msgstr "錯誤：strdup 失敗"
+
+#~ msgid "error: calloc failed"
+#~ msgstr "錯誤：calloc 失敗"
+
+#~ msgid ""
+#~ "CPU architecture information helper\n"
+#~ "\n"
+#~ " -h, --help usage information\n"
+#~ " -p, --parse print out in parsable instead of printable format.\n"
+#~ " -s, --sysroot use the directory as a new system root.\n"
+#~ msgstr ""
+#~ "CPU 架構資訊輔助程式\n"
+#~ "\n"
+#~ " -h, --help 用法資訊\n"
+#~ " -p, --parse 以可剖析格式印出以代替可列印格式。\n"
+#~ " -s, --sysroot 使用此目錄做為新系統的根目錄。\n"
+
+#~ msgid ""
+#~ "%s: Usage: \"%s [options]\n"
+#~ "\t -m <mapfile> (defaults: \"%s\" and\n"
+#~ "\t\t\t\t \"%s\")\n"
+#~ "\t -p <pro-file> (default: \"%s\")\n"
+#~ "\t -M <mult> set the profiling multiplier to <mult>\n"
+#~ "\t -i print only info about the sampling step\n"
+#~ "\t -v print verbose data\n"
+#~ "\t -a print all symbols, even if count is 0\n"
+#~ "\t -b print individual histogram-bin counts\n"
+#~ "\t -s print individual counters within functions\n"
+#~ "\t -r reset all the counters (root only)\n"
+#~ "\t -n disable byte order auto-detection\n"
+#~ "\t -V print version and exit\n"
+#~ msgstr ""
+#~ "%s：用法：\"%s [options]\n"
+#~ "\t -m <mapfile> (預設值：\"%s\" 和\n"
+#~ "\t\t\t\t \"%s\")\n"
+#~ "\t -p <pro-file> (預設：\"%s\")\n"
+#~ "\t -M <mult> 設定側寫檔複製器為<mult>\n"
+#~ "\t -i 只印出有關取樣率的資訊\n"
+#~ "\t -v 印出詳細的資料\n"
+#~ "\t -a 即使計數為 0 也印出所有符號\n"
+#~ "\t -b 印出個別 histogram-bin 計數\n"
+#~ "\t -s 印出函式內個別計數器\n"
+#~ "\t -r 重置所有計數器(只限 root 使用)\n"
+#~ "\t -n 停用位元組次序的自動偵測\n"
+#~ "\t -V 印出版本然後離開\n"
+
+#~ msgid "readprofile: error writing %s: %s\n"
+#~ msgstr "readprofile：寫入 %s 時錯誤：%s\n"
+
#~ msgid "renice: %s: unknown user\n"
#~ msgstr "renice：%s: 不明的使用者\n"
#~ msgid "renice: %s: bad value\n"
#~ msgstr "renice：%s: 不當的值\n"
-#~ msgid "setpriority"
-#~ msgstr "setpriority"
-
#~ msgid "%s: illegal interval %s seconds\n"
#~ msgstr "%s：不合法的 %s 秒間隔\n"
#~ msgid "%s: illegal time_t value %s\n"
#~ msgstr "%s：不合法的 time_t 值 %s\n"
-#~ msgid "%s: version %s\n"
-#~ msgstr "%s：版本 %s\n"
-
-#~ msgid "%s: unable to execute %s: %s\n"
-#~ msgstr "%s：無法執行 %s：%s\n"
-
#~ msgid "rtc read"
#~ msgstr "rtc 讀取"
+#~ msgid ""
+#~ "\n"
+#~ "For more information see setarch(8).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 setarch(8)。\n"
+
+#~ msgid "usage: %s program [arg ...]\n"
+#~ msgstr "用法：%s 程式 [引數…]\n"
+
+#~ msgid ""
+#~ "Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n"
+#~ " -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
+#~ " -T [on|off] ]\n"
+#~ msgstr ""
+#~ "用法：%s <裝置> [ -i <IRQ> | -t <時間> | -c <字元> | -w <等待> | \n"
+#~ " -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
+#~ " -T [on|off] ]\n"
+
#~ msgid "malloc error"
#~ msgstr "malloc 錯誤"
+#~ msgid "col: bad -l argument %s.\n"
+#~ msgstr "col：不當的 -l 引數 %s。\n"
+
+#~ msgid "usage: col [-bfpx] [-l nline]\n"
+#~ msgstr "用法：col [-bfpx] [-l 列數]\n"
+
+#~ msgid "usage: %s [ - ] [ -2 ] [ file ... ]\n"
+#~ msgstr "用法：%s [ - ] [ -2 ] [檔案…]\n"
+
#~ msgid "usage: column [-tx] [-c columns] [file ...]\n"
-#~ msgstr "用法：column [-tx] [-c 欄數] [檔案...]\n"
+#~ msgstr "用法：column [-tx] [-c 欄數] [檔案…]\n"
+
+#~ msgid "hexdump: bad length value.\n"
+#~ msgstr "hexdump：不當的長度值。\n"
+
+#~ msgid "hexdump: bad skip value.\n"
+#~ msgstr "hexdump：不當的跳過值。\n"
+
+#~ msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n"
+#~ msgstr "hexdump：[-bcCdovx] [-e 格式] [-f 格式檔案] [-n 長度] [-s 跳過] [檔案 …]\n"
+
+#~ msgid "usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n"
+#~ msgstr "用法：%s [-dflpcsu] [+列號 | +/式樣] 名稱一 名稱二…\n"
#~ msgid "od: od(1) has been deprecated for hexdump(1).\n"
#~ msgstr "od：od(1) 已不宜用於 hexdump(1)。\n"
#~ msgid "; see strings(1)."
#~ msgstr "；參看 strings(1)。"
+#~ msgid "hexdump: can't read %s.\n"
+#~ msgstr "hexdump：無法讀取 %s。\n"
+
+#~ msgid "hexdump: line too long.\n"
+#~ msgstr "hexdump：列太長。\n"
+
#~ msgid "Out of memory\n"
#~ msgstr "記憶體不足\n"
+#~ msgid "Cannot open "
+#~ msgstr "無法開啟 "
+
#~ msgid "unable to allocate bufferspace"
#~ msgstr "無法配置緩衝區空間"
#~ msgid "usage: rev [file ...]\n"
#~ msgstr "用法：rev [檔案…]\n"
+#~ msgid "usage: tailf [-n N | -N] logfile"
+#~ msgstr "用法：tailf [-n N | -N] 日誌檔案"
+
+#~ msgid "usage: %s [ -i ] [ -tTerm ] file...\n"
+#~ msgstr "用法：%s [ -i ] [ -tTerm ] 檔案…\n"
+
#~ msgid "Unable to allocate buffer.\n"
#~ msgstr "無法配置緩衝區。\n"
projects / thirdparty / util-linux.git / blobdiff