po: update cs.po (from translationproject.org)

[thirdparty/util-linux.git] / po / zh_CN.po

# Chinese simplified translation of util-linux.
# Copyright (C) 2008-2016, util-linux's authors.
# This file is distributed under the same license as the util-linux package.
# Ray Wang <wanglei1123@gmail.com>, 2008.
# Wylmer Wang <wantinghard@gmail.com>, 2012, 2013, 2014, 2015, 2016.
# Boyuan Yang <073plan@gmail.com>, 2019, 2020, 2021, 2022.
msgid ""
msgstr ""
"Project-Id-Version: util-linux-2.38-rc4\n"
"Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
"POT-Creation-Date: 2023-04-19 09:50+0200\n"
"PO-Revision-Date: 2022-03-17 10:51-0400\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.0.1\n"

#: disk-utils/addpart.c:15
#, c-format
msgid " %s <disk device> <partition number> <start> <length>\n"
msgstr " %s <磁盘设备> <分区号> <起点> <长度>\n"

#: disk-utils/addpart.c:19
msgid "Tell the kernel about the existence of a specified partition.\n"
msgstr "通知内核，存在某个指定分区。\n"

#: disk-utils/addpart.c:52 disk-utils/blockdev.c:251 disk-utils/delpart.c:52
#: disk-utils/mkfs.bfs.c:134 disk-utils/resizepart.c:96 misc-utils/kill.c:323
#: misc-utils/kill.c:384 misc-utils/rename.c:348 misc-utils/whereis.c:539
#: sys-utils/flock.c:177 sys-utils/ipcrm.c:161 sys-utils/ldattach.c:368
#: sys-utils/renice.c:175 sys-utils/switch_root.c:261 sys-utils/tunelp.c:152
#: term-utils/agetty.c:910 term-utils/agetty.c:911 term-utils/agetty.c:919
#: term-utils/agetty.c:920
msgid "not enough arguments"
msgstr "参数不够"

#. TRANSLATORS: '%s' refers to a file
#: disk-utils/addpart.c:57 disk-utils/blockdev.c:300 disk-utils/blockdev.c:444
#: disk-utils/blockdev.c:471 disk-utils/cfdisk.c:2820 disk-utils/delpart.c:58
#: disk-utils/fdformat.c:229 disk-utils/fdisk.c:810 disk-utils/fdisk.c:1141
#: disk-utils/fdisk-list.c:327 disk-utils/fdisk-list.c:368
#: disk-utils/fdisk-list.c:391 disk-utils/fsck.c:1473
#: disk-utils/fsck.cramfs.c:158 disk-utils/fsck.cramfs.c:542
#: disk-utils/isosize.c:53 disk-utils/mkfs.bfs.c:202
#: disk-utils/mkfs.cramfs.c:175 disk-utils/mkfs.cramfs.c:664
#: disk-utils/mkfs.cramfs.c:812 disk-utils/mkfs.minix.c:838
#: disk-utils/mkswap.c:347 disk-utils/mkswap.c:377 disk-utils/partx.c:1022
#: disk-utils/resizepart.c:104 disk-utils/sfdisk.c:381 disk-utils/sfdisk.c:502
#: disk-utils/sfdisk.c:814 disk-utils/sfdisk.c:1118 disk-utils/swaplabel.c:65
#: libfdisk/src/bsd.c:642 login-utils/islocal.c:86 login-utils/last.c:683
#: login-utils/sulogin.c:497 login-utils/sulogin.c:534
#: login-utils/utmpdump.c:142 login-utils/utmpdump.c:367
#: login-utils/utmpdump.c:391 login-utils/vipw.c:257 login-utils/vipw.c:275
#: misc-utils/fadvise.c:148 misc-utils/findmnt.c:1227 misc-utils/logger.c:1247
#: misc-utils/mcookie.c:119 misc-utils/pipesz.c:162 misc-utils/uuidd.c:235
#: sys-utils/blkdiscard.c:248 sys-utils/blkpr.c:164 sys-utils/blkzone.c:144
#: sys-utils/dmesg.c:541 sys-utils/eject.c:501 sys-utils/eject.c:696
#: sys-utils/fallocate.c:405 sys-utils/fsfreeze.c:116 sys-utils/fstrim.c:106
#: sys-utils/hwclock.c:241 sys-utils/hwclock.c:912 sys-utils/hwclock-rtc.c:108
#: sys-utils/hwclock-rtc.c:353 sys-utils/hwclock-rtc.c:389
#: sys-utils/hwclock-rtc.c:449 sys-utils/hwclock-rtc.c:502
#: sys-utils/irq-common.c:263 sys-utils/ldattach.c:392
#: sys-utils/lscpu-cputype.c:477 sys-utils/lsmem.c:671 sys-utils/nsenter.c:139
#: sys-utils/rfkill.c:195 sys-utils/rtcwake.c:137 sys-utils/rtcwake.c:292
#: sys-utils/setpriv.c:256 sys-utils/setpriv.c:622 sys-utils/setpriv.c:645
#: sys-utils/swapon.c:382 sys-utils/swapon.c:525 sys-utils/switch_root.c:174
#: sys-utils/unshare.c:115 sys-utils/unshare.c:130 sys-utils/wdctl.c:417
#: sys-utils/zramctl.c:517 term-utils/agetty.c:3013 term-utils/mesg.c:154
#: term-utils/script.c:386 term-utils/scriptlive.c:256
#: term-utils/scriptlive.c:259 term-utils/scriptlive.c:262
#: term-utils/scriptreplay.c:281 term-utils/scriptreplay.c:284
#: term-utils/scriptreplay.c:287 term-utils/scriptreplay.c:290
#: term-utils/wall.c:353 text-utils/colcrt.c:284 text-utils/more.c:459
#: text-utils/rev.c:165 text-utils/ul.c:637
#, c-format
msgid "cannot open %s"
msgstr "打不开 %s"

#: disk-utils/addpart.c:60 disk-utils/delpart.c:61 disk-utils/resizepart.c:101
msgid "invalid partition number argument"
msgstr "无效的分区号参数"

#: disk-utils/addpart.c:61
msgid "invalid start argument"
msgstr "无效的 起点 参数"

#: disk-utils/addpart.c:62 disk-utils/resizepart.c:111 misc-utils/fadvise.c:115
msgid "invalid length argument"
msgstr "无效的长度参数"

#: disk-utils/addpart.c:63
msgid "failed to add partition"
msgstr "添加分区失败"

#: disk-utils/blockdev.c:64
msgid "set read-only"
msgstr "设置只读"

#: disk-utils/blockdev.c:71
msgid "set read-write"
msgstr "设置读写"

#: disk-utils/blockdev.c:77
msgid "get read-only"
msgstr "获得只读"

#: disk-utils/blockdev.c:83
msgid "get discard zeroes support status"
msgstr "获取 忽略零数据 支持状态"

#: disk-utils/blockdev.c:89
msgid "get logical block (sector) size"
msgstr "获得逻辑块(扇区)大小"

#: disk-utils/blockdev.c:95
msgid "get physical block (sector) size"
msgstr "获得物理块(扇区)大小"

#: disk-utils/blockdev.c:101
msgid "get minimum I/O size"
msgstr "获得最小 I/O 大小"

#: disk-utils/blockdev.c:107
msgid "get optimal I/O size"
msgstr "获得最优 I/O 大小"

#: disk-utils/blockdev.c:113
msgid "get alignment offset in bytes"
msgstr "获得对齐偏移字节数"

#: disk-utils/blockdev.c:119
msgid "get max sectors per request"
msgstr "获得每次请求的最大扇区数"

#: disk-utils/blockdev.c:125
msgid "get blocksize"
msgstr "获得块大小"

#: disk-utils/blockdev.c:132
msgid "set blocksize on file descriptor opening the block device"
msgstr "设置打开该块设备的文件描述符的块大小"

#: disk-utils/blockdev.c:138
msgid "get 32-bit sector count (deprecated, use --getsz)"
msgstr "获得 32-bit 扇区数量(已废弃，请使用 --getsz)"

#: disk-utils/blockdev.c:144
msgid "get size in bytes"
msgstr "获得字节大小"

#: disk-utils/blockdev.c:151
msgid "set readahead"
msgstr "设置 readahead"

#: disk-utils/blockdev.c:157
msgid "get readahead"
msgstr "获取 readahead"

#: disk-utils/blockdev.c:164
msgid "set filesystem readahead"
msgstr "设置 文件系统 readahead"

#: disk-utils/blockdev.c:170
msgid "get filesystem readahead"
msgstr "获取 文件系统 readahead"

#: disk-utils/blockdev.c:176
#, fuzzy
#| msgid "disk serial number"
msgid "get disk sequence number"
msgstr "磁盘序列号"

#: disk-utils/blockdev.c:180
msgid "flush buffers"
msgstr "刷新缓存"

#: disk-utils/blockdev.c:184
msgid "reread partition table"
msgstr "重新读取分区表"

#: disk-utils/blockdev.c:194
#, c-format
msgid ""
" %1$s [-v|-q] commands devices\n"
" %1$s --report [devices]\n"
" %1$s -h|-V\n"
msgstr ""
" %1$s [-v|-q] 命令 设备\n"
" %1$s --report [设备]\n"
" %1$s -h|-V\n"

#: disk-utils/blockdev.c:200
msgid "Call block device ioctls from the command line."
msgstr "从命令行调用块设备 ioctls。"

#: disk-utils/blockdev.c:203
msgid " -q             quiet mode"
msgstr " -q             安静模式"

#: disk-utils/blockdev.c:204
msgid " -v             verbose mode"
msgstr " -v             详尽模式"

#: disk-utils/blockdev.c:205
msgid "     --report   print report for specified (or all) devices"
msgstr "     --report   输出指定（或全部）设备的报告"

#: disk-utils/blockdev.c:210
msgid "Available commands:"
msgstr "可用命令："

#: disk-utils/blockdev.c:211
#, c-format
msgid " %-25s get size in 512-byte sectors\n"
msgstr " %-25s 获得 512-字节扇区的大小\n"

#: disk-utils/blockdev.c:293 disk-utils/fdformat.c:219
#: disk-utils/fsck.minix.c:1336 disk-utils/isosize.c:155
#: disk-utils/mkfs.bfs.c:191 disk-utils/mkfs.c:110 disk-utils/mkfs.minix.c:827
#: disk-utils/swaplabel.c:180 misc-utils/wipefs.c:764
#: sys-utils/blkdiscard.c:237 sys-utils/blkpr.c:303 sys-utils/blkzone.c:495
#: sys-utils/tunelp.c:241 sys-utils/zramctl.c:716 sys-utils/zramctl.c:742
msgid "no device specified"
msgstr "未指定设备"

#: disk-utils/blockdev.c:335
msgid "could not get device size"
msgstr "无法获取设备大小"

#: disk-utils/blockdev.c:341
#, c-format
msgid "Unknown command: %s"
msgstr "未知命令: %s"

#: disk-utils/blockdev.c:357
#, c-format
msgid "%s requires an argument"
msgstr "%s 需要一个参数"

#: disk-utils/blockdev.c:361
msgid "failed to parse command argument"
msgstr "解析命令参数失败"

#: disk-utils/blockdev.c:392 disk-utils/blockdev.c:504
#, c-format
msgid "ioctl error on %s"
msgstr "%s ioctl 出错"

#: disk-utils/blockdev.c:394
#, c-format
msgid "%s failed.\n"
msgstr "%s 失败。\n"

#: disk-utils/blockdev.c:401
#, c-format
msgid "%s succeeded.\n"
msgstr "%s 成功。\n"

#. TRANSLATORS: Start sector not available. Max. 15 letters.
#: disk-utils/blockdev.c:488
msgid "N/A"
msgstr "N/A"

#: disk-utils/blockdev.c:512
#, c-format
msgid "RO    RA   SSZ   BSZ        StartSec            Size   Device\n"
msgstr "RO    RA   SSZ   BSZ        开始段               大小   设备\n"

#: disk-utils/cfdisk.c:198
msgid "Bootable"
msgstr "可启动"

#: disk-utils/cfdisk.c:198
msgid "Toggle bootable flag of the current partition"
msgstr "开关当前分区的 可启动 标志"

#: disk-utils/cfdisk.c:199
msgid "Delete"
msgstr "删除"

#: disk-utils/cfdisk.c:199
msgid "Delete the current partition"
msgstr "删除当前分区"

#: disk-utils/cfdisk.c:200
msgid "Resize"
msgstr "更改尺寸"

#: disk-utils/cfdisk.c:200
msgid "Reduce or enlarge the current partition"
msgstr "减小或扩大当前分区"

#: disk-utils/cfdisk.c:201
msgid "New"
msgstr "新建"

#: disk-utils/cfdisk.c:201
msgid "Create new partition from free space"
msgstr "在剩余空间上创建新分区"

#: disk-utils/cfdisk.c:202
msgid "Quit"
msgstr "退出"

#: disk-utils/cfdisk.c:202
msgid "Quit program without writing changes"
msgstr "退出程序而不写入更改"

#: disk-utils/cfdisk.c:203 libfdisk/src/bsd.c:439 libfdisk/src/bsd.c:1031
#: libfdisk/src/dos.c:2809 libfdisk/src/gpt.c:3248 libfdisk/src/sgi.c:1165
#: libfdisk/src/sun.c:1136
msgid "Type"
msgstr "类型"

#: disk-utils/cfdisk.c:203
msgid "Change the partition type"
msgstr "更改分区类型"

#: disk-utils/cfdisk.c:204
msgid "Help"
msgstr "帮助"

#: disk-utils/cfdisk.c:204
msgid "Print help screen"
msgstr "打印帮助界面"

#: disk-utils/cfdisk.c:205
msgid "Sort"
msgstr "排序"

#: disk-utils/cfdisk.c:205
msgid "Fix partitions order"
msgstr "修复分区顺序"

#: disk-utils/cfdisk.c:206
msgid "Write"
msgstr "写入"

#: disk-utils/cfdisk.c:206
msgid "Write partition table to disk (this might destroy data)"
msgstr "将分区表写入磁盘(可能损坏数据)"

#: disk-utils/cfdisk.c:207
msgid "Dump"
msgstr "转储"

#: disk-utils/cfdisk.c:207
msgid "Dump partition table to sfdisk compatible script file"
msgstr "将分区表转储到与 sfdisk 兼容的脚本文件"

#: disk-utils/cfdisk.c:652 disk-utils/fdisk.c:465
#, c-format
msgid "internal error: unsupported dialog type %d"
msgstr "内部错误：不支持的对话类型 %d"

#: disk-utils/cfdisk.c:1318
#, c-format
msgid "%s (mounted)"
msgstr "%s (已挂载)"

#: disk-utils/cfdisk.c:1366
msgid "Partition name:"
msgstr "分区名："

#: disk-utils/cfdisk.c:1373
msgid "Partition UUID:"
msgstr "分区 UUID："

#: disk-utils/cfdisk.c:1392
msgid "Partition type:"
msgstr "分区类型："

#: disk-utils/cfdisk.c:1399
msgid "Attributes:"
msgstr "属性："

#: disk-utils/cfdisk.c:1423
msgid "Filesystem UUID:"
msgstr "文件系统 UUID："

#: disk-utils/cfdisk.c:1430
msgid "Filesystem LABEL:"
msgstr "文件系统标签："

#: disk-utils/cfdisk.c:1436
msgid "Filesystem:"
msgstr "文件系统："

#: disk-utils/cfdisk.c:1441
msgid "Mountpoint:"
msgstr "挂载点："

#: disk-utils/cfdisk.c:1785
#, c-format
msgid "Disk: %s"
msgstr "磁盘：%s"

#: disk-utils/cfdisk.c:1787
#, c-format
msgid "Size: %s, %<PRIu64> bytes, %ju sectors"
msgstr "尺寸：%s，%<PRIu64> 字节，%ju 个扇区"

#: disk-utils/cfdisk.c:1790
#, c-format
msgid "Label: %s, identifier: %s"
msgstr "标签：%s，标识符：%s"

#: disk-utils/cfdisk.c:1793
#, c-format
msgid "Label: %s"
msgstr "标签：%s"

#: disk-utils/cfdisk.c:1944
msgid "May be followed by M for MiB, G for GiB, T for TiB, or S for sectors."
msgstr "后面可以加 M(MiB), G(GiB), T(TiB) 或 S(扇区)。"

#: disk-utils/cfdisk.c:1950
msgid "Please, specify size."
msgstr "请指定文件大小。"

#: disk-utils/cfdisk.c:1972
#, c-format
msgid "Minimum size is %<PRIu64> bytes."
msgstr "最小尺寸为 %<PRIu64> 字节。"

#: disk-utils/cfdisk.c:1981
#, c-format
msgid "Maximum size is %<PRIu64> bytes."
msgstr "最大尺寸为 %<PRIu64> 字节。"

#: disk-utils/cfdisk.c:1988
msgid "Failed to parse size."
msgstr "解析大小失败。"

#: disk-utils/cfdisk.c:2046
msgid "Select partition type"
msgstr "选择分区类型"

#: disk-utils/cfdisk.c:2096 disk-utils/cfdisk.c:2126
msgid "Enter script file name: "
msgstr "输入脚本文件名："

#: disk-utils/cfdisk.c:2097
msgid "The script file will be applied to in-memory partition table."
msgstr "该脚本文件将应用于内存中的分区表。"

#: disk-utils/cfdisk.c:2106 disk-utils/cfdisk.c:2148
#: disk-utils/fdisk-menu.c:484 disk-utils/fdisk-menu.c:528
#, c-format
msgid "Cannot open %s"
msgstr "无法打开 %s"

#: disk-utils/cfdisk.c:2108 disk-utils/fdisk-menu.c:486
#, c-format
msgid "Failed to parse script file %s"
msgstr "解析脚本文件 %s 失败"

#: disk-utils/cfdisk.c:2110 disk-utils/fdisk-menu.c:488
#, c-format
msgid "Failed to apply script %s"
msgstr "应用脚本文件 %s 失败"

#: disk-utils/cfdisk.c:2127
msgid "The current in-memory partition table will be dumped to the file."
msgstr "当前的内存中分区表将转储到该文件中。"

#: disk-utils/cfdisk.c:2135 disk-utils/fdisk-menu.c:516
msgid "Failed to allocate script handler"
msgstr "分配脚本处理程序失败"

#: disk-utils/cfdisk.c:2141
msgid "Failed to read disk layout into script."
msgstr "将磁盘布局读入脚本出错。"

#: disk-utils/cfdisk.c:2155
msgid "Disk layout successfully dumped."
msgstr "成功转储了磁盘布局。"

#: disk-utils/cfdisk.c:2158 disk-utils/fdisk-menu.c:534
#, c-format
msgid "Failed to write script %s"
msgstr "写脚本文件 %s 失败"

#: disk-utils/cfdisk.c:2194
msgid "Select label type"
msgstr "选择标签类型"

#: disk-utils/cfdisk.c:2197 disk-utils/fdisk.c:1162 disk-utils/fdisk-menu.c:492
msgid "Device does not contain a recognized partition table."
msgstr "设备不包含可识别的分区表。"

#: disk-utils/cfdisk.c:2205
msgid "Select a type to create a new label, press 'L' to load script file, 'Q' quits."
msgstr "选择一种类型来创建新标签，按“L”加载脚本文件，按“Q”退出。"

# 以下三句连贯，一起翻译
#: disk-utils/cfdisk.c:2254
msgid "This is cfdisk, a curses-based disk partitioning program."
msgstr "这是 cfdisk，一款基于 curses 的磁盘分区程序。"

#: disk-utils/cfdisk.c:2255
msgid "It lets you create, delete, and modify partitions on a block device."
msgstr "可以创建、删除和修改块设备上的分区。"

# 以下两条注意对齐
#: disk-utils/cfdisk.c:2257
msgid "Command      Meaning"
msgstr "命令         意义"

#: disk-utils/cfdisk.c:2258
msgid "-------      -------"
msgstr "-------      -------"

#: disk-utils/cfdisk.c:2259
msgid "  b          Toggle bootable flag of the current partition"
msgstr "  b          切换当前分区的 可启动 标志"

#: disk-utils/cfdisk.c:2260
msgid "  d          Delete the current partition"
msgstr "  d          删除当前分区"

#: disk-utils/cfdisk.c:2261
msgid "  h          Print this screen"
msgstr "  h          打印此屏幕"

#: disk-utils/cfdisk.c:2262
msgid "  n          Create new partition from free space"
msgstr "  n          从空闲空间创建新分区"

#: disk-utils/cfdisk.c:2263
msgid "  q          Quit program without writing partition table"
msgstr "  q          退出程序但不写入分区表"

#: disk-utils/cfdisk.c:2264
msgid "  r          Reduce or enlarge the current partition"
msgstr "  r          减小或扩大当前分区"

#: disk-utils/cfdisk.c:2265
msgid "  s          Fix partitions order (only when in disarray)"
msgstr "  s          修复分区顺序(仅磁盘阵列)"

#: disk-utils/cfdisk.c:2266
msgid "  t          Change the partition type"
msgstr "  t          更改分区类型"

#: disk-utils/cfdisk.c:2267
msgid "  u          Dump disk layout to sfdisk compatible script file"
msgstr "  u          将磁盘布局转储到兼容 sfdisk 的脚本文件"

#: disk-utils/cfdisk.c:2268
msgid "  W          Write partition table to disk (you must enter uppercase W);"
msgstr "  W          将分区表写入磁盘(必须输入大写 W)；"

#: disk-utils/cfdisk.c:2269
msgid "               since this might destroy data on the disk, you must either"
msgstr "             由于这可能破坏磁盘上的数据，您必须"

#: disk-utils/cfdisk.c:2270
msgid "               confirm or deny the write by entering 'yes' or 'no'"
msgstr "             通过输入“yes”或“no”来确认或拒绝"

#: disk-utils/cfdisk.c:2271
msgid "  x          Display/hide extra information about a partition"
msgstr "  x          显示/隐藏分区的额外信息"

#: disk-utils/cfdisk.c:2272
msgid "Up Arrow     Move cursor to the previous partition"
msgstr "上箭头       光标移到上一分区"

#: disk-utils/cfdisk.c:2273
msgid "Down Arrow   Move cursor to the next partition"
msgstr "下箭头       光标移到下一分区"

#: disk-utils/cfdisk.c:2274
msgid "Left Arrow   Move cursor to the previous menu item"
msgstr "上箭头       光标移到上一菜单项"

#: disk-utils/cfdisk.c:2275
msgid "Right Arrow  Move cursor to the next menu item"
msgstr "下箭头       光标移到下一菜单项"

#: disk-utils/cfdisk.c:2277
msgid "Note: All of the commands can be entered with either upper or lower"
msgstr "注：所有命令均可以大写或小写"

#: disk-utils/cfdisk.c:2278
msgid "case letters (except for Write)."
msgstr "字母输入(除了 写入)。"

#: disk-utils/cfdisk.c:2280
msgid "Use lsblk(8) or partx(8) to see more details about the device."
msgstr "使用 lsblk(8) 或 partx(8) 了解有关磁盘的更多细节。"

#: disk-utils/cfdisk.c:2290 disk-utils/cfdisk.c:2593
msgid "Press a key to continue."
msgstr "按下一个键继续。"

#: disk-utils/cfdisk.c:2376
msgid "Could not toggle the flag."
msgstr "无法切换标志。"

#: disk-utils/cfdisk.c:2386
#, c-format
msgid "Could not delete partition %zu."
msgstr "无法删除分区 %zu。"

#: disk-utils/cfdisk.c:2388 disk-utils/fdisk-menu.c:661
#, c-format
msgid "Partition %zu has been deleted."
msgstr "分区 %zu 已删除。"

#: disk-utils/cfdisk.c:2409
msgid "Partition size: "
msgstr "分区大小："

#: disk-utils/cfdisk.c:2450
#, c-format
msgid "Changed type of partition %zu."
msgstr "已更改分区 %zu 的类型。"

#: disk-utils/cfdisk.c:2452
#, c-format
msgid "The type of partition %zu is unchanged."
msgstr "分区 %zu 的类型未更改。"

#: disk-utils/cfdisk.c:2473
msgid "New size: "
msgstr "新大小："

#: disk-utils/cfdisk.c:2488
#, c-format
msgid "Partition %zu resized."
msgstr "已调整分区 %zu 的大小。"

#: disk-utils/cfdisk.c:2506 disk-utils/fdisk.c:1138 disk-utils/fdisk-menu.c:595
msgid "Device is open in read-only mode."
msgstr "设备以只读方式打开。"

#: disk-utils/cfdisk.c:2511
msgid "Are you sure you want to write the partition table to disk? "
msgstr "您确定想将分区表写入磁盘吗？"

#: disk-utils/cfdisk.c:2513
msgid "Type \"yes\" or \"no\", or press ESC to leave this dialog."
msgstr "输入“yes”或“no”或按 ESC 取消对话框。"

#: disk-utils/cfdisk.c:2518 login-utils/lslogins.c:219 sys-utils/lscpu.c:339
#: sys-utils/lsmem.c:266
msgid "yes"
msgstr "是"

#: disk-utils/cfdisk.c:2519
msgid "Did not write partition table to disk."
msgstr "未将分区表写入磁盘。"

#: disk-utils/cfdisk.c:2524
msgid "Failed to write disklabel."
msgstr "写磁盘标签失败。"

#: disk-utils/cfdisk.c:2530 disk-utils/fdisk-menu.c:602
msgid "The partition table has been altered."
msgstr "分区表已调整。"

#: disk-utils/cfdisk.c:2553 disk-utils/cfdisk.c:2628
msgid "Note that partition table entries are not in disk order now."
msgstr "注意，现在分区表记录没有按磁盘顺序。"

#: disk-utils/cfdisk.c:2590
#, c-format
msgid "Device already contains a %s signature; it will be removed by a write command."
msgstr "设备已包含一个 %s 签名；写入命令会将其移除。"

#: disk-utils/cfdisk.c:2602
msgid "failed to create a new disklabel"
msgstr "创建新磁盘标签失败"

#: disk-utils/cfdisk.c:2611
msgid "failed to read partitions"
msgstr "读分区失败"

#: disk-utils/cfdisk.c:2624
msgid "Device is open in read-only mode. Changes will remain in memory only."
msgstr "设备以只读方式打开。修改将仅停留在内存中。"

#: disk-utils/cfdisk.c:2626
msgid "Device is currently in use, repartitioning is probably a bad idea."
msgstr "设备正在被使用，不建议您重新分区。"

#: disk-utils/cfdisk.c:2712
#, c-format
msgid " %1$s [options] <disk>\n"
msgstr " %1$s [选项] <磁盘>\n"

#: disk-utils/cfdisk.c:2715 disk-utils/fdisk.c:855 disk-utils/sfdisk.c:2044
msgid "Display or manipulate a disk partition table.\n"
msgstr "显示或操作磁盘分区表。\n"

#: disk-utils/cfdisk.c:2719
#, c-format
msgid " -L, --color[=<when>]     colorize output (%s, %s or %s)\n"
msgstr " -L, --color[=<时机>]     彩色输出（%s, %s 或 %s）\n"

#: disk-utils/cfdisk.c:2722
msgid " -z, --zero               start with zeroed partition table\n"
msgstr " -z, --zero              以空分区表开始\n"

#: disk-utils/cfdisk.c:2724
#, c-format
msgid "     --lock[=<mode>]      use exclusive device lock (%s, %s or %s)\n"
msgstr "     --lock[=<模式>]      使用独占设备锁（%s、%s 或 %s）\n"

#: disk-utils/cfdisk.c:2725
msgid " -r, --read-only          forced open cfdisk in read-only mode\n"
msgstr " -r, --read-only          强制以只读模式打开 cfdisk\n"

#: disk-utils/cfdisk.c:2768 disk-utils/fdisk.c:1014 disk-utils/sfdisk.c:2350
#: misc-utils/cal.c:421 sys-utils/dmesg.c:1499 text-utils/hexdump.c:121
msgid "unsupported color mode"
msgstr "不支持的颜色模式"

#: disk-utils/cfdisk.c:2798 disk-utils/fdisk.c:949 disk-utils/sfdisk.c:232
msgid "failed to allocate libfdisk context"
msgstr "分配 libfdisk 环境(context)失败"

#: disk-utils/delpart.c:15
#, c-format
msgid " %s <disk device> <partition number>\n"
msgstr " %s <磁盘设备> <分区号>\n"

#: disk-utils/delpart.c:19
msgid "Tell the kernel to forget about a specified partition.\n"
msgstr "通知内核忘记某个特定的分区。\n"

#: disk-utils/delpart.c:62
msgid "failed to remove partition"
msgstr "移除分区失败"

#: disk-utils/fdformat.c:54
#, c-format
msgid "Formatting ... "
msgstr "正在格式化 ... "

#: disk-utils/fdformat.c:69 disk-utils/fdformat.c:139
#, c-format
msgid "done\n"
msgstr "完成\n"

#: disk-utils/fdformat.c:81
#, c-format
msgid "Verifying ... "
msgstr "正在验证 ... "

#: disk-utils/fdformat.c:109
msgid "Read: "
msgstr "读: "

#: disk-utils/fdformat.c:111
#, c-format
msgid "Problem reading track/head %u/%u, expected %d, read %d\n"
msgstr "读磁道/磁头 %u/%u 时出问题, 期望 %d, 读取 %d\n"

#: disk-utils/fdformat.c:128
#, c-format
msgid ""
"bad data in track/head %u/%u\n"
"Continuing ... "
msgstr ""
"磁道/磁头 %u/%u 有坏数据\n"
"将继续 ... "

#: disk-utils/fdformat.c:146 disk-utils/fsck.minix.c:183
#: disk-utils/swaplabel.c:123 misc-utils/wipefs.c:633 sys-utils/blkdiscard.c:92
#: sys-utils/blkpr.c:213 sys-utils/tunelp.c:95
#, c-format
msgid " %s [options] <device>\n"
msgstr " %s [选项] <设备>\n"

#: disk-utils/fdformat.c:150
msgid "Do a low-level formatting of a floppy disk.\n"
msgstr "对软盘进行低级格式化。\n"

#: disk-utils/fdformat.c:153
msgid " -f, --from <N>    start at the track N (default 0)\n"
msgstr " -f, --from <N>    从磁道 N 开始(默认 0)\n"

#: disk-utils/fdformat.c:154
msgid " -t, --to <N>      stop at the track N\n"
msgstr " -t, --to <N>      在磁道 N 停止\n"

#: disk-utils/fdformat.c:155
msgid ""
" -r, --repair <N>  try to repair tracks failed during\n"
"                     the verification (max N retries)\n"
msgstr ""
" -r, --repair <N>  尝试修复在验证时失败的磁道\n"
"                     (最多尝试 N 次)\n"

#: disk-utils/fdformat.c:157
msgid " -n, --no-verify   disable the verification after the format\n"
msgstr " -n, --no-verify   禁止格式化后的验证\n"

#: disk-utils/fdformat.c:195
msgid "invalid argument - from"
msgstr "无效参数 - from"

#: disk-utils/fdformat.c:199
msgid "invalid argument - to"
msgstr "无效参数 - to"

#: disk-utils/fdformat.c:202
msgid "invalid argument - repair"
msgstr "无效参数 - repair"

#: disk-utils/fdformat.c:223 disk-utils/fsck.cramfs.c:162
#: disk-utils/mkfs.bfs.c:198 disk-utils/mkfs.cramfs.c:341
#: disk-utils/mkfs.cramfs.c:763 disk-utils/mkfs.cramfs.c:809
#: disk-utils/mkfs.minix.c:835 disk-utils/mkswap.c:374 disk-utils/partx.c:959
#: login-utils/last.c:697 login-utils/utmpdump.c:145 misc-utils/namei.c:146
#: misc-utils/rename.c:164 misc-utils/rename.c:229 sys-utils/blkdiscard.c:251
#: sys-utils/blkzone.c:147 sys-utils/dmesg.c:543 sys-utils/fallocate.c:201
#: sys-utils/fsfreeze.c:119 sys-utils/fstrim.c:78 sys-utils/nsenter.c:187
#: sys-utils/swapon.c:530 sys-utils/switch_root.c:93
#: sys-utils/switch_root.c:134 sys-utils/switch_root.c:139
#: sys-utils/unshare.c:211 term-utils/mesg.c:144 term-utils/mesg.c:156
#: text-utils/more.c:463
#, c-format
msgid "stat of %s failed"
msgstr "对 %s stat 失败"

#: disk-utils/fdformat.c:226 disk-utils/partx.c:1019 misc-utils/lsblk.c:1663
#: sys-utils/blkdiscard.c:253 sys-utils/blkzone.c:149
#: sys-utils/mountpoint.c:109
#, c-format
msgid "%s: not a block device"
msgstr "%s：不是一个块设备"

#: disk-utils/fdformat.c:231
msgid "could not determine current format type"
msgstr "不能确定当前格式类型"

#: disk-utils/fdformat.c:233
#, c-format
msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
msgstr "%s-面, %d 磁道, %d 秒/磁道. 总容量 %d kB.\n"

#: disk-utils/fdformat.c:234
msgid "Double"
msgstr "双面"

#: disk-utils/fdformat.c:234
msgid "Single"
msgstr "单面"

#: disk-utils/fdformat.c:241
msgid "user defined start track exceeds the medium specific maximum"
msgstr "用户定义的起始磁道超出了媒体的最大指定值"

#: disk-utils/fdformat.c:243
msgid "user defined end track exceeds the medium specific maximum"
msgstr "用户定义的结束磁道超出了媒体的最大指定值"

#: disk-utils/fdformat.c:245
msgid "user defined start track exceeds the user defined end track"
msgstr "用户定义的起始磁道超过了定义的终止磁道"

#: disk-utils/fdformat.c:253 misc-utils/logger.c:1050
msgid "close failed"
msgstr "关闭失败"

#: disk-utils/fdisk.c:206
#, c-format
msgid "Select (default %c): "
msgstr "选择 (默认 %c)："

#: disk-utils/fdisk.c:211
#, c-format
msgid "Using default response %c."
msgstr "将使用默认回应 %c。"

#: disk-utils/fdisk.c:224 disk-utils/fdisk.c:298 disk-utils/fdisk.c:375
#: libfdisk/src/dos.c:1465 libfdisk/src/gpt.c:2574
msgid "Value out of range."
msgstr "值超出范围。"

#: disk-utils/fdisk.c:253
#, c-format
msgid "%s (%s, default %c): "
msgstr "%s (%s，默认 %c)："

#: disk-utils/fdisk.c:256 disk-utils/fdisk.c:323
#, c-format
msgid "%s (%s, default %<PRIu64>): "
msgstr "%s (%s, 默认  %<PRIu64>): "

#: disk-utils/fdisk.c:261
#, c-format
msgid "%s (%c-%c, default %c): "
msgstr "%s (%c-%c，默认为 %c)："

#: disk-utils/fdisk.c:265 disk-utils/fdisk.c:327
#, c-format
msgid "%s (%<PRIu64>-%<PRIu64>, default %<PRIu64>): "
msgstr "%s (%<PRIu64>-%<PRIu64>, 默认 %<PRIu64>): "

#: disk-utils/fdisk.c:268
#, c-format
msgid "%s (%c-%c): "
msgstr "%s (%c-%c)："

#: disk-utils/fdisk.c:271 disk-utils/fdisk.c:330
#, c-format
msgid "%s (%<PRIu64>-%<PRIu64>): "
msgstr "%s (%<PRIu64>-%<PRIu64>): "

#: disk-utils/fdisk.c:442 disk-utils/sfdisk.c:206
msgid " [Y]es/[N]o: "
msgstr "是[Y]/否[N]："

#: disk-utils/fdisk.c:486
msgid "Hex code or alias (type L to list all): "
msgstr "Hex 代码或别名（输入 L 列出所有代码）："

#: disk-utils/fdisk.c:487
msgid "Partition type or alias (type L to list all): "
msgstr "分区类型或别名（输入 L 列出所有类型）："

#: disk-utils/fdisk.c:490
msgid "Hex code (type L to list all codes): "
msgstr "Hex 代码(输入 L 列出所有代码)："

#: disk-utils/fdisk.c:491
msgid "Partition type (type L to list all types): "
msgstr "分区类型(输入 L 列出所有类型)："

#: disk-utils/fdisk.c:511
#, c-format
msgid "Failed to parse '%s' partition type."
msgstr "解析“%s”分区类型失败。"

#: disk-utils/fdisk.c:602
msgid ""
"\n"
"Aliases:\n"
msgstr ""
"\n"
"别名：\n"

#: disk-utils/fdisk.c:628
msgid "DOS Compatibility flag is set (DEPRECATED!)"
msgstr "已设置 DOS 兼容性标志(已废弃！)"

#: disk-utils/fdisk.c:629
msgid "DOS Compatibility flag is not set"
msgstr "DOS 兼容性标志未设置"

#: disk-utils/fdisk.c:651 disk-utils/fdisk.c:689
#, c-format
msgid "Partition %zu does not exist yet!"
msgstr "分区 %zu 还不存在！"

#: disk-utils/fdisk.c:656 disk-utils/fdisk.c:667 libfdisk/src/ask.c:1032
msgid "Unknown"
msgstr "未知"

#: disk-utils/fdisk.c:666
#, c-format
msgid "Changed type of partition '%s' to '%s'."
msgstr "已将分区“%s”的类型更改为“%s”。"

#: disk-utils/fdisk.c:670
#, c-format
msgid "Type of partition %zu is unchanged: %s."
msgstr "分区 %zu 的类型未更改：%s。"

#: disk-utils/fdisk.c:766
#, c-format
msgid ""
"\n"
"%s: offset = %<PRIu64>, size = %zu bytes."
msgstr ""
"\n"
"%s: 偏移 = %<PRIu64>, 大小 = %zu 字节。"

#: disk-utils/fdisk.c:772
msgid "cannot seek"
msgstr "无法定位"

#: disk-utils/fdisk.c:777
msgid "cannot read"
msgstr "不能读"

#: disk-utils/fdisk.c:788 libfdisk/src/bsd.c:258 libfdisk/src/dos.c:1050
#: libfdisk/src/gpt.c:2494
msgid "First sector"
msgstr "第一个扇区"

#: disk-utils/fdisk.c:814
#, c-format
msgid "BLKGETSIZE ioctl failed on %s"
msgstr "对 %s 进行 BLKGETSIZE ioctl 失败"

#: disk-utils/fdisk.c:832
#, c-format
msgid "The device contains '%s' signature and it will be removed by a write command. See fdisk(8) man page and --wipe option for more details."
msgstr "设备已包含一个 '%s' 签名，写入命令会将其移除。请参见 fdisk(8) 的手册页和 --wipe 选项以了解更多细节。"

#: disk-utils/fdisk.c:837
#, fuzzy, c-format
#| msgid "The old %s signature may remain on the device. It is recommended to wipe the device with wipefs(8) or fdisk --wipe, in order to avoid possible collisions."
msgid "The device contains '%s' signature and it may remain on the device. It is recommended to wipe the device with wipefs(8) or fdisk --wipe, in order to avoid possible collisions."
msgstr "旧签名 %s 可能仍然在设备上存留。建议您使用 wipefs(8) 或者 fdisk --wipe 来擦除该设备，以避免潜在的冲突。"

#: disk-utils/fdisk.c:850
#, c-format
msgid ""
" %1$s [options] <disk>         change partition table\n"
" %1$s [options] -l [<disk>...] list partition table(s)\n"
msgstr ""
" %1$s [选项] <磁盘>         更改分区表\n"
" %1$s [选项] -l [<磁盘>...]     列出分区表\n"

#: disk-utils/fdisk.c:858
msgid " -b, --sector-size <size>      physical and logical sector size\n"
msgstr " -b, --sectors-size <大小>     显示扇区计数和大小\n"

#: disk-utils/fdisk.c:859
msgid " -B, --protect-boot            don't erase bootbits when creating a new label\n"
msgstr " -B, --protect-boot            创建新标签时不要擦除 bootbits \n"

#: disk-utils/fdisk.c:860
msgid " -c, --compatibility[=<mode>]  mode is 'dos' or 'nondos' (default)\n"
msgstr " -c, --compatibility[=<模式>]  模式，为“dos”或“nondos”(默认)\n"

#: disk-utils/fdisk.c:862
#, c-format
msgid " -L, --color[=<when>]          colorize output (%s, %s or %s)\n"
msgstr " -L, --color[=<时机>]          彩色输出（%s, %s 或 %s）\n"

#: disk-utils/fdisk.c:865
msgid " -l, --list                    display partitions and exit\n"
msgstr " -l, --list                    显示分区并退出\n"

#: disk-utils/fdisk.c:866
msgid " -x, --list-details            like --list but with more details\n"
msgstr " -x, --list-details            类似 --list 但提供更多细节\n"

#: disk-utils/fdisk.c:868
msgid " -n, --noauto-pt               don't create default partition table on empty devices\n"
msgstr " -n, --noauto-pt               不要在空设备上创建默认分区表\n"

#: disk-utils/fdisk.c:869
msgid " -o, --output <list>           output columns\n"
msgstr " -o, --output <列表>           输出列\n"

#: disk-utils/fdisk.c:870
msgid " -t, --type <type>             recognize specified partition table type only\n"
msgstr " -t, --type <类型>             只识别指定的分区表类型\n"

#: disk-utils/fdisk.c:871
msgid " -u, --units[=<unit>]          display units: 'cylinders' or 'sectors' (default)\n"
msgstr " -u, --units[=<单位>]          显示单位，“cylinders”柱面或“sectors”扇区(默认)\n"

#: disk-utils/fdisk.c:872
msgid " -s, --getsz                   display device size in 512-byte sectors [DEPRECATED]\n"
msgstr " -s, --getsz                   以 512-字节扇区显示设备大小[已废弃]\n"

#: disk-utils/fdisk.c:873
msgid "     --bytes                   print SIZE in bytes rather than in human readable format\n"
msgstr "     -b, --bytes                   以字节为单位而非易读的格式来打印 SIZE\n"

#: disk-utils/fdisk.c:875
#, c-format
msgid "     --lock[=<mode>]           use exclusive device lock (%s, %s or %s)\n"
msgstr "     --lock[=<模式>]           使用独占设备锁（%s、%s 或 %s）\n"

#: disk-utils/fdisk.c:877
#, c-format
msgid " -w, --wipe <mode>             wipe signatures (%s, %s or %s)\n"
msgstr " -w, --wipe <模式>             擦除签名（%s, %s 或 %s）\n"

#: disk-utils/fdisk.c:879 disk-utils/sfdisk.c:2099
#, c-format
msgid " -W, --wipe-partitions <mode>  wipe signatures from new partitions (%s, %s or %s)\n"
msgstr " -W, --wipe-partitions <模式>  擦除新分区的签名(%s, %s 或 %s)\n"

#: disk-utils/fdisk.c:882
msgid " -C, --cylinders <number>      specify the number of cylinders\n"
msgstr " -C, --cylinders <数字>        指定柱面数\n"

#: disk-utils/fdisk.c:883
msgid " -H, --heads <number>          specify the number of heads\n"
msgstr " -H, --heads <数字>            指定磁头数\n"

#: disk-utils/fdisk.c:884
msgid " -S, --sectors <number>        specify the number of sectors per track\n"
msgstr " -S, --sectors <数字>          指定每条磁道的扇区数\n"

#: disk-utils/fdisk.c:959 disk-utils/fdisk.c:961 disk-utils/partx.c:882
msgid "invalid sector size argument"
msgstr "无效的 扇区大小 参数"

#: disk-utils/fdisk.c:971
msgid "invalid cylinders argument"
msgstr "无效的 柱面数 参数"

#: disk-utils/fdisk.c:983
msgid "not found DOS label driver"
msgstr "未找到 DOS 标签驱动"

#: disk-utils/fdisk.c:989
#, c-format
msgid "unknown compatibility mode '%s'"
msgstr "未知兼容模式“%s”"

#: disk-utils/fdisk.c:996
msgid "invalid heads argument"
msgstr "无效的 磁头数 参数"

#: disk-utils/fdisk.c:1002
msgid "invalid sectors argument"
msgstr "无效的 扇区数 参数"

#: disk-utils/fdisk.c:1034
#, c-format
msgid "unsupported disklabel: %s"
msgstr "不支持的磁盘标签：%s"

#: disk-utils/fdisk.c:1042
msgid "unsupported unit"
msgstr "不支持的单位"

#: disk-utils/fdisk.c:1050 disk-utils/fdisk.c:1055 disk-utils/sfdisk.c:2311
#: disk-utils/sfdisk.c:2316
msgid "unsupported wipe mode"
msgstr "不支持的擦除模式"

#: disk-utils/fdisk.c:1076
msgid "The device properties (sector size and geometry) should be used with one specified device only."
msgstr "设备属性(扇区大小和几何属性)只能用于某个指定的设备。"

#: disk-utils/fdisk.c:1107 disk-utils/fdisk.c:1122 disk-utils/fsck.cramfs.c:723
#: disk-utils/mkfs.bfs.c:211 disk-utils/mkfs.cramfs.c:799
#: disk-utils/partx.c:975 disk-utils/raw.c:136 disk-utils/raw.c:149
#: disk-utils/raw.c:161 disk-utils/raw.c:202 misc-utils/cal.c:525
#: misc-utils/findfs.c:58 misc-utils/look.c:147 misc-utils/whereis.c:592
#: misc-utils/whereis.c:603 misc-utils/whereis.c:614 misc-utils/whereis.c:659
#: schedutils/chrt.c:442 schedutils/ionice.c:264 schedutils/taskset.c:207
#: sys-utils/chcpu.c:355 sys-utils/chmem.c:429 sys-utils/dmesg.c:1579
#: sys-utils/ipcmk.c:143 sys-utils/ldattach.c:321 sys-utils/losetup.c:918
#: sys-utils/lscpu.c:1350 sys-utils/lsmem.c:656 sys-utils/mount.c:867
#: sys-utils/mount.c:875 sys-utils/mount.c:924 sys-utils/mount.c:937
#: sys-utils/mount.c:1009 sys-utils/mountpoint.c:191 sys-utils/pivot_root.c:71
#: sys-utils/swapoff.c:258 sys-utils/swapon.c:1011 sys-utils/switch_root.c:270
#: sys-utils/umount.c:629 term-utils/setterm.c:1197 text-utils/col.c:584
#: text-utils/more.c:2096
msgid "bad usage"
msgstr "错误用法"

#: disk-utils/fdisk.c:1128
#, c-format
msgid "Welcome to fdisk (%s)."
msgstr "欢迎使用 fdisk (%s)。"

#: disk-utils/fdisk.c:1130 disk-utils/sfdisk.c:1808
msgid ""
"Changes will remain in memory only, until you decide to write them.\n"
"Be careful before using the write command.\n"
msgstr ""
"更改将停留在内存中，直到您决定将更改写入磁盘。\n"
"使用写入命令前请三思。\n"

#: disk-utils/fdisk.c:1145
msgid ""
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"It's recommended to umount all file systems, and swapoff all swap\n"
"partitions on this disk.\n"
msgstr ""
"该磁盘目前正在使用 - 不建议您重新分区。\n"
"推荐您卸载此磁盘上所有的文件系统，并关闭（swapoff）上面的交换分区。\n"

#: disk-utils/fdisk.c:1168
msgid "A hybrid GPT was detected. You have to sync the hybrid MBR manually (expert command 'M')."
msgstr "检测到混合 GPT。您需要手动同步混合 MBR (用专家命令“M”)"

#: disk-utils/fdisk-list.c:43
#, c-format
msgid "Disklabel type: %s"
msgstr "磁盘标签类型：%s"

#: disk-utils/fdisk-list.c:47
#, c-format
msgid "Disk identifier: %s"
msgstr "磁盘标识符：%s"

#: disk-utils/fdisk-list.c:61
#, c-format
msgid "Disk %s: %s, %ju bytes, %ju sectors"
msgstr "Disk %s：%s，%ju 字节，%ju 个扇区"

#: disk-utils/fdisk-list.c:68
#, c-format
msgid "Disk model: %s"
msgstr "磁盘型号：%s"

#: disk-utils/fdisk-list.c:71
#, c-format
msgid "Geometry: %d heads, %ju sectors/track, %ju cylinders"
msgstr "几何属性：%d 个磁头, %ju 个扇区/磁道, %ju 个柱面"

#: disk-utils/fdisk-list.c:76 disk-utils/fdisk-list.c:299
#, c-format
msgid "Units: %s of %d * %ld = %ld bytes"
msgstr "单元：%s / %d * %ld = %ld 字节"

#: disk-utils/fdisk-list.c:82 disk-utils/fdisk-list.c:305
#, c-format
msgid "Sector size (logical/physical): %lu bytes / %lu bytes"
msgstr "扇区大小(逻辑/物理)：%lu 字节 / %lu 字节"

#: disk-utils/fdisk-list.c:85
#, c-format
msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes"
msgstr "I/O 大小(最小/最佳)：%lu 字节 / %lu 字节"

#: disk-utils/fdisk-list.c:89
#, c-format
msgid "Alignment offset: %lu bytes"
msgstr "对齐偏移量：%lu 字节"

#: disk-utils/fdisk-list.c:120 disk-utils/fdisk-list.c:241
#: disk-utils/fsck.c:1260
msgid "failed to allocate iterator"
msgstr "分配迭代器失败"

#: disk-utils/fdisk-list.c:126 disk-utils/fdisk-list.c:247
#: disk-utils/partx.c:669 login-utils/lslogins.c:1113 misc-utils/fincore.c:357
#: misc-utils/findmnt.c:1763 misc-utils/lsblk.c:2351 misc-utils/lsfd.c:1970
#: misc-utils/lslocks.c:472 misc-utils/uuidparse.c:252 misc-utils/wipefs.c:157
#: sys-utils/losetup.c:325 sys-utils/lscpu.c:604 sys-utils/lscpu.c:759
#: sys-utils/lscpu.c:970 sys-utils/lsipc.c:354 sys-utils/prlimit.c:311
#: sys-utils/rfkill.c:474 sys-utils/swapon.c:296 sys-utils/wdctl.c:349
#: sys-utils/zramctl.c:496 text-utils/column.c:217
msgid "failed to allocate output table"
msgstr "分配输出表失败"

#: disk-utils/fdisk-list.c:167 disk-utils/fdisk-list.c:271
#: disk-utils/partx.c:583 login-utils/lslogins.c:1173 misc-utils/fincore.c:123
#: misc-utils/findmnt.c:788 misc-utils/findmnt.c:806 misc-utils/lsblk.c:1231
#: misc-utils/lsfd.c:1134 misc-utils/lslocks.c:400 misc-utils/uuidparse.c:154
#: misc-utils/wipefs.c:202 sys-utils/losetup.c:348 sys-utils/losetup.c:377
#: sys-utils/lscpu.c:518 sys-utils/lscpu.c:794 sys-utils/lscpu.c:826
#: sys-utils/lsipc.c:486 sys-utils/lsipc.c:567 sys-utils/lsipc.c:669
#: sys-utils/lsipc.c:761 sys-utils/lsipc.c:925 sys-utils/prlimit.c:240
#: sys-utils/rfkill.c:389 sys-utils/swapon.c:179 sys-utils/wdctl.c:299
#: sys-utils/zramctl.c:414 text-utils/column.c:559 text-utils/column.c:584
msgid "failed to allocate output line"
msgstr "分配输出行失败"

#: disk-utils/fdisk-list.c:177 disk-utils/fdisk-list.c:278
#: disk-utils/partx.c:646 login-utils/lslogins.c:1277 misc-utils/fincore.c:159
#: misc-utils/findmnt.c:792 misc-utils/findmnt.c:811 misc-utils/lsblk.c:1272
#: misc-utils/lsfd-bdev.c:48 misc-utils/lsfd-bdev.c:61
#: misc-utils/lsfd-bdev.c:87 misc-utils/lsfd-bdev.c:89
#: misc-utils/lsfd-cdev.c:49 misc-utils/lsfd-cdev.c:66
#: misc-utils/lsfd-cdev.c:101 misc-utils/lsfd-cdev.c:103
#: misc-utils/lsfd-fifo.c:59 misc-utils/lsfd-fifo.c:91
#: misc-utils/lsfd-fifo.c:93 misc-utils/lsfd-file.c:131
#: misc-utils/lsfd-file.c:137 misc-utils/lsfd-file.c:143
#: misc-utils/lsfd-file.c:150 misc-utils/lsfd-file.c:157
#: misc-utils/lsfd-file.c:162 misc-utils/lsfd-file.c:274
#: misc-utils/lsfd-file.c:276 misc-utils/lsfd-file.c:444
#: misc-utils/lsfd-file.c:451 misc-utils/lsfd-sock.c:54
#: misc-utils/lsfd-sock.c:114 misc-utils/lsfd-sock.c:116
#: misc-utils/lsfd-unkn.c:114 misc-utils/lsfd-unkn.c:116
#: misc-utils/lslocks.c:459 misc-utils/uuidparse.c:239 misc-utils/wipefs.c:242
#: sys-utils/losetup.c:305 sys-utils/lscpu.c:586 sys-utils/lscpu.c:801
#: sys-utils/lscpu.c:830 sys-utils/lscpu.c:840 sys-utils/lsipc.c:526
#: sys-utils/lsipc.c:651 sys-utils/prlimit.c:275 sys-utils/rfkill.c:417
#: sys-utils/swapon.c:227 sys-utils/wdctl.c:327 sys-utils/zramctl.c:481
#: text-utils/column.c:568
msgid "failed to add output data"
msgstr "添加输出信息失败"

#: disk-utils/fdisk-list.c:197
#, c-format
msgid "Partition %zu does not start on physical sector boundary."
msgstr "分区 %zu 未起始于物理扇区边界。"

#: disk-utils/fdisk-list.c:205
#, c-format
msgid "Filesystem/RAID signature on partition %zu will be wiped."
msgstr "%zu 分区上的文件系统/RAID 签名将被擦除。"

#: disk-utils/fdisk-list.c:214
msgid "Partition table entries are not in disk order."
msgstr "分区表记录没有按磁盘顺序。"

#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1026 libfdisk/src/dos.c:2803
#: libfdisk/src/gpt.c:3244 libfdisk/src/sgi.c:1159 libfdisk/src/sun.c:1130
msgid "Start"
msgstr "起点"

#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1027 libfdisk/src/dos.c:2804
#: libfdisk/src/gpt.c:3245 libfdisk/src/sgi.c:1160 libfdisk/src/sun.c:1131
msgid "End"
msgstr "末尾"

#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1028 libfdisk/src/dos.c:2805
#: libfdisk/src/gpt.c:3246 libfdisk/src/sgi.c:1161 libfdisk/src/sun.c:1132
msgid "Sectors"
msgstr "扇区"

#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1030 libfdisk/src/dos.c:2807
#: libfdisk/src/gpt.c:3247 libfdisk/src/sgi.c:1163 libfdisk/src/sun.c:1134
msgid "Size"
msgstr "大小"

#: disk-utils/fdisk-list.c:293
#, c-format
msgid "Unpartitioned space %s: %s, %ju bytes, %ju sectors"
msgstr "未分区的空间 %s：%s，%ju 个字节，%ju 个扇区"

#: disk-utils/fdisk-list.c:483
#, c-format
msgid "%s unknown column: %s"
msgstr "%s 未知列: %s"

#: disk-utils/fdisk-menu.c:96
msgid "Generic"
msgstr "常规"

#: disk-utils/fdisk-menu.c:97
msgid "delete a partition"
msgstr "删除分区"

#: disk-utils/fdisk-menu.c:98
msgid "list free unpartitioned space"
msgstr "列出未分区的空闲区"

#: disk-utils/fdisk-menu.c:99
msgid "list known partition types"
msgstr "列出已知分区类型"

#: disk-utils/fdisk-menu.c:100
msgid "add a new partition"
msgstr "添加新分区"

#: disk-utils/fdisk-menu.c:101
msgid "print the partition table"
msgstr "打印分区表"

#: disk-utils/fdisk-menu.c:102
msgid "change a partition type"
msgstr "更改分区类型"

#: disk-utils/fdisk-menu.c:103
msgid "verify the partition table"
msgstr "检查分区表"

#: disk-utils/fdisk-menu.c:104
msgid "print information about a partition"
msgstr "打印某个分区的相关信息"

#: disk-utils/fdisk-menu.c:106
msgid "print the raw data of the first sector from the device"
msgstr "打印设备第1个扇区的原始数据"

#: disk-utils/fdisk-menu.c:107
msgid "print the raw data of the disklabel from the device"
msgstr "打印设备磁盘标签的原始数据"

#: disk-utils/fdisk-menu.c:108
msgid "fix partitions order"
msgstr "修复分区顺序"

#: disk-utils/fdisk-menu.c:110
msgid "Misc"
msgstr "杂项"

#: disk-utils/fdisk-menu.c:111
msgid "print this menu"
msgstr "打印此菜单"

#: disk-utils/fdisk-menu.c:112
msgid "change display/entry units"
msgstr "更改 显示/记录 单位"

#: disk-utils/fdisk-menu.c:113
msgid "extra functionality (experts only)"
msgstr "更多功能(仅限专业人员)"

#: disk-utils/fdisk-menu.c:115
msgid "Script"
msgstr "脚本"

#: disk-utils/fdisk-menu.c:116
msgid "load disk layout from sfdisk script file"
msgstr "从 sfdisk 脚本文件加载磁盘布局"

#: disk-utils/fdisk-menu.c:117
msgid "dump disk layout to sfdisk script file"
msgstr "将磁盘布局转储为 sfdisk 脚本文件"

#: disk-utils/fdisk-menu.c:119
msgid "Save & Exit"
msgstr "保存并退出"

#: disk-utils/fdisk-menu.c:120
msgid "write table to disk and exit"
msgstr "将分区表写入磁盘并退出"

#: disk-utils/fdisk-menu.c:121
msgid "write table to disk"
msgstr "将分区表写入磁盘"

#: disk-utils/fdisk-menu.c:122
msgid "quit without saving changes"
msgstr "退出而不保存更改"

#: disk-utils/fdisk-menu.c:123
msgid "return to main menu"
msgstr "返回主菜单"

#: disk-utils/fdisk-menu.c:125
#, fuzzy
#| msgid "return from BSD to DOS"
msgid "return from BSD to DOS (MBR)"
msgstr "从 BSD 回到 DOS"

#: disk-utils/fdisk-menu.c:127 disk-utils/fdisk-menu.c:227
msgid "return from protective/hybrid MBR to GPT"
msgstr "从 保护/混合 MBR 回到 GPT"

#: disk-utils/fdisk-menu.c:138
msgid "Create a new label"
msgstr "新建空磁盘标签"

#: disk-utils/fdisk-menu.c:139
msgid "create a new empty GPT partition table"
msgstr "新建一份 GPT 分区表"

#: disk-utils/fdisk-menu.c:140
msgid "create a new empty SGI (IRIX) partition table"
msgstr "新建一份空 GPT (IRIX) 分区表"

#: disk-utils/fdisk-menu.c:141
#, fuzzy
#| msgid "create a new empty DOS partition table"
msgid "create a new empty MBR (DOS) partition table"
msgstr "新建一份的空 DOS 分区表"

#: disk-utils/fdisk-menu.c:142
msgid "create a new empty Sun partition table"
msgstr "新建一份空 Sun 分区表"

#: disk-utils/fdisk-menu.c:146
msgid "create an IRIX (SGI) partition table"
msgstr "创建一份 IRIX(SGI) 分区表"

#: disk-utils/fdisk-menu.c:155
msgid "Geometry (for the current label)"
msgstr "几何属性（对当前标签）"

#: disk-utils/fdisk-menu.c:156
msgid "change number of cylinders"
msgstr "更改柱面数"

#: disk-utils/fdisk-menu.c:157
msgid "change number of heads"
msgstr "更改磁头数"

#: disk-utils/fdisk-menu.c:158
msgid "change number of sectors/track"
msgstr "更改扇区/磁道数"

#: disk-utils/fdisk-menu.c:167 include/pt-mbr-partnames.h:102
msgid "GPT"
msgstr "GPT"

#: disk-utils/fdisk-menu.c:168
msgid "change disk GUID"
msgstr "更改磁盘 GUID"

#: disk-utils/fdisk-menu.c:169
msgid "change partition name"
msgstr "更改分区名"

#: disk-utils/fdisk-menu.c:170
msgid "change partition UUID"
msgstr "更改分区 UUID"

#: disk-utils/fdisk-menu.c:171
msgid "change table length"
msgstr "更改表长度"

#: disk-utils/fdisk-menu.c:172
msgid "enter protective/hybrid MBR"
msgstr "进入 保护/混合 MBR"

#: disk-utils/fdisk-menu.c:175
msgid "toggle the legacy BIOS bootable flag"
msgstr "开关旧 BIOS 的 可启动 标志"

#: disk-utils/fdisk-menu.c:176
msgid "toggle the no block IO protocol flag"
msgstr "开关 不阻塞 IO 协议 标志"

#: disk-utils/fdisk-menu.c:177
msgid "toggle the required partition flag"
msgstr "开关 必需分区 标志"

#: disk-utils/fdisk-menu.c:178
msgid "toggle the GUID specific bits"
msgstr "开/关 GUID 特定位"

#: disk-utils/fdisk-menu.c:188
msgid "Sun"
msgstr "Sun"

#: disk-utils/fdisk-menu.c:189
msgid "toggle the read-only flag"
msgstr "开关 只读 标志"

#: disk-utils/fdisk-menu.c:190
msgid "toggle the mountable flag"
msgstr "开关 可挂臷 标志"

#: disk-utils/fdisk-menu.c:192
msgid "change number of alternate cylinders"
msgstr "更改备选柱面数"

#: disk-utils/fdisk-menu.c:193
msgid "change number of extra sectors per cylinder"
msgstr "更改每柱面的额外扇区数"

#: disk-utils/fdisk-menu.c:194
msgid "change interleave factor"
msgstr "更改交错系数"

#: disk-utils/fdisk-menu.c:195
msgid "change rotation speed (rpm)"
msgstr "更改转速(转/分)"

#: disk-utils/fdisk-menu.c:196
msgid "change number of physical cylinders"
msgstr "更改物理柱面数"

#: disk-utils/fdisk-menu.c:205
msgid "SGI"
msgstr "SGI"

#: disk-utils/fdisk-menu.c:206
msgid "select bootable partition"
msgstr "选择可启动分区"

#: disk-utils/fdisk-menu.c:207
msgid "edit bootfile entry"
msgstr "编辑启动文件记录"

#: disk-utils/fdisk-menu.c:208
msgid "select sgi swap partition"
msgstr "选择 sgi 交换分区"

#: disk-utils/fdisk-menu.c:209
msgid "create SGI info"
msgstr "创建 SGI 信息"

#: disk-utils/fdisk-menu.c:218
msgid "DOS (MBR)"
msgstr "DOS (MBR)"

#: disk-utils/fdisk-menu.c:219
msgid "toggle a bootable flag"
msgstr "开关 可启动 标志"

#: disk-utils/fdisk-menu.c:220
msgid "edit nested BSD disklabel"
msgstr "编辑嵌套的 BSD 磁盘标签"

#: disk-utils/fdisk-menu.c:221
msgid "toggle the dos compatibility flag"
msgstr "开关 dos 兼容性标志"

#: disk-utils/fdisk-menu.c:223
msgid "move beginning of data in a partition"
msgstr "移动分区数据的起始点"

#: disk-utils/fdisk-menu.c:224
msgid "fix partitions C/H/S values"
msgstr "修复分区 C/H/S 值"

#: disk-utils/fdisk-menu.c:225
msgid "change the disk identifier"
msgstr "更改磁盘标识符"

#: disk-utils/fdisk-menu.c:237
msgid "BSD"
msgstr "BSD"

#: disk-utils/fdisk-menu.c:238
msgid "edit drive data"
msgstr "编辑驱动数据"

#: disk-utils/fdisk-menu.c:239
msgid "install bootstrap"
msgstr "安装引导程序"

#: disk-utils/fdisk-menu.c:240
msgid "show complete disklabel"
msgstr "显示完整磁盘标签"

#: disk-utils/fdisk-menu.c:241
msgid "link BSD partition to non-BSD partition"
msgstr "将 BSD 分区链接到非 BSD 分区"

#: disk-utils/fdisk-menu.c:373
#, c-format
msgid ""
"\n"
"Help (expert commands):\n"
msgstr ""
"\n"
"帮助 (专业命令)：\n"

#: disk-utils/fdisk-menu.c:375 disk-utils/sfdisk.c:1472
#, c-format
msgid ""
"\n"
"Help:\n"
msgstr ""
"\n"
"帮助：\n"

#: disk-utils/fdisk-menu.c:395
#, c-format
msgid "You're editing nested '%s' partition table, primary partition table is '%s'."
msgstr "您正在编辑嵌套的“%s”分区表，主分区表为“%s”。"

#: disk-utils/fdisk-menu.c:425
msgid "Expert command (m for help): "
msgstr "专家命令(输入 m 显示帮助)："

#: disk-utils/fdisk-menu.c:427
msgid "Command (m for help): "
msgstr "命令(输入 m 获取帮助)："

#: disk-utils/fdisk-menu.c:439
#, fuzzy
#| msgid ""
#| "\n"
#| "All unwritten changes will be lost, do you really want to quit? "
msgid ""
"\n"
"All unwritten changes will be lost, do you really want to quit? (y/n)"
msgstr ""
"\n"
"所有未写入的修改均会丢失，您确认要退出吗？"

#: disk-utils/fdisk-menu.c:452
#, c-format
msgid "%c: unknown command"
msgstr "%c：未知命令"

#: disk-utils/fdisk-menu.c:477 disk-utils/fdisk-menu.c:510
msgid "Enter script file name"
msgstr "输入脚本文件名"

#: disk-utils/fdisk-menu.c:489
msgid "Resetting fdisk!"
msgstr "正在重置 fdisk！"

#: disk-utils/fdisk-menu.c:496
msgid "Script successfully applied."
msgstr "成功应用了脚本。"

#: disk-utils/fdisk-menu.c:522
msgid "Failed to transform disk layout into script"
msgstr "将磁盘布局转换成脚本失败"

#: disk-utils/fdisk-menu.c:536
msgid "Script successfully saved."
msgstr "成本保存了脚本。"

#: disk-utils/fdisk-menu.c:559 disk-utils/sfdisk.c:1698
#, c-format
msgid "Partition #%zu contains a %s signature."
msgstr "分区 #%zu 包含一个 %s 签名。"

#: disk-utils/fdisk-menu.c:562 disk-utils/sfdisk.c:1701
msgid "Do you want to remove the signature?"
msgstr "您想移除该签名吗？"

#: disk-utils/fdisk-menu.c:567 disk-utils/sfdisk.c:1706
msgid "The signature will be removed by a write command."
msgstr "写入命令将移除该签名。"

#: disk-utils/fdisk-menu.c:600
msgid "failed to write disklabel"
msgstr "写磁盘标签失败"

#: disk-utils/fdisk-menu.c:659
#, c-format
msgid "Could not delete partition %zu"
msgstr "无法删除分区 %zu"

#: disk-utils/fdisk-menu.c:688
msgid "Changing display/entry units to cylinders (DEPRECATED!)."
msgstr "将显示/记录单位更改为柱面(已废弃！)。"

#: disk-utils/fdisk-menu.c:690
msgid "Changing display/entry units to sectors."
msgstr "将显示/记录单位更改为盲区。"

#: disk-utils/fdisk-menu.c:700 disk-utils/fdisk-menu.c:871
msgid "Leaving nested disklabel."
msgstr "离开嵌套的磁盘标签。"

#: disk-utils/fdisk-menu.c:737
msgid "New maximum entries"
msgstr "新的最大记录数"

#: disk-utils/fdisk-menu.c:748
msgid "Entering protective/hybrid MBR disklabel."
msgstr "进入 保护/混合 MBR 磁盘标签。"

#: disk-utils/fdisk-menu.c:764
msgid "New UUID (in 8-4-4-4-12 format)"
msgstr "新 UUID (以 8-4-4-4-12 格式)"

#: disk-utils/fdisk-menu.c:779
msgid "New name"
msgstr "新名称"

#: disk-utils/fdisk-menu.c:842
msgid "Entering nested BSD disklabel."
msgstr "进入嵌套的 BSD 磁盘标签。"

#: disk-utils/fdisk-menu.c:878
msgid "C/H/S values fixed."
msgstr "C/H/S 值已修复。"

#: disk-utils/fdisk-menu.c:880
msgid "Nothing to do. C/H/S values are correct already."
msgstr "无须操作。C/H/S 值已经是正确的了。"

#: disk-utils/fdisk-menu.c:1047
msgid "Number of cylinders"
msgstr "柱面数"

#: disk-utils/fdisk-menu.c:1054
msgid "Number of heads"
msgstr "磁头数"

#: disk-utils/fdisk-menu.c:1060
msgid "Number of sectors"
msgstr "扇区数"

#: disk-utils/fdisk-menu.c:1111
#, c-format
msgid "Failed to create '%s' disk label"
msgstr "创建“%s”磁盘标签失败"

#: disk-utils/fsck.c:214
#, c-format
msgid "%s is mounted\n"
msgstr "%s 已经挂载\n"

#: disk-utils/fsck.c:216
#, c-format
msgid "%s is not mounted\n"
msgstr "%s 未挂载\n"

#: disk-utils/fsck.c:330 disk-utils/fsck.cramfs.c:179
#: disk-utils/fsck.cramfs.c:186 disk-utils/fsck.cramfs.c:242
#: disk-utils/fsck.cramfs.c:263 disk-utils/sfdisk.c:308 libfdisk/src/bsd.c:647
#: login-utils/last.c:215 login-utils/last.c:252 login-utils/sulogin.c:721
#: misc-utils/hardlink.c:840 schedutils/uclampset.c:111
#: sys-utils/ctrlaltdel.c:44 sys-utils/irq-common.c:269 sys-utils/rfkill.c:216
#: sys-utils/setpriv.c:265 term-utils/setterm.c:746 term-utils/setterm.c:802
#: term-utils/setterm.c:806 term-utils/setterm.c:813
#, c-format
msgid "cannot read %s"
msgstr "不能读 %s"

#: disk-utils/fsck.c:332 login-utils/utmpdump.c:288
#, c-format
msgid "parse error: %s"
msgstr "解析错误：%s"

#: disk-utils/fsck.c:359
#, c-format
msgid "cannot create directory %s"
msgstr "无法创建 %s 目录"

#: disk-utils/fsck.c:372
#, c-format
msgid "Locking disk by %s ... "
msgstr "正由 %s 锁定磁盘..."

#: disk-utils/fsck.c:383
#, c-format
msgid "(waiting) "
msgstr "(等待中) "

#. TRANSLATORS: These are followups to "Locking disk...".
#: disk-utils/fsck.c:393
msgid "succeeded"
msgstr "成功"

#: disk-utils/fsck.c:393
msgid "failed"
msgstr "失败"

#: disk-utils/fsck.c:410
#, c-format
msgid "Unlocking %s.\n"
msgstr "正在解锁 %s。\n"

#: disk-utils/fsck.c:441
#, c-format
msgid "failed to setup description for %s"
msgstr "设置 %s 描述 失败"

#: disk-utils/fsck.c:471 misc-utils/findmnt.c:897 misc-utils/lsblk-mnt.c:15
#: sys-utils/mount.c:100 sys-utils/swapon-common.c:19 sys-utils/umount.c:52
#, c-format
msgid "%s: parse error at line %d -- ignored"
msgstr "%s：第 %d 行解析出错 -- 已忽略"

#: disk-utils/fsck.c:503 disk-utils/fsck.c:505
#, c-format
msgid "%s: failed to parse fstab"
msgstr "%s：解析 fstab 失败"

#: disk-utils/fsck.c:690 login-utils/login.c:1119 login-utils/sulogin.c:1112
#: login-utils/vipw.c:200 sys-utils/flock.c:351 sys-utils/nsenter.c:207
#: sys-utils/swapon.c:332 sys-utils/unshare.c:298 sys-utils/unshare.c:626
#: sys-utils/unshare.c:962
msgid "fork failed"
msgstr "fork 失败"

#: disk-utils/fsck.c:697
#, c-format
msgid "%s: execute failed"
msgstr "%s：执行失败"

#: disk-utils/fsck.c:787
msgid "wait: no more child process?!?"
msgstr "wait：没有剩余子进程了？！？"

#: disk-utils/fsck.c:790 sys-utils/flock.c:369 sys-utils/swapon.c:359
#: sys-utils/unshare.c:248 sys-utils/unshare.c:986
msgid "waitpid failed"
msgstr "waitpid 失败"

#: disk-utils/fsck.c:808
#, c-format
msgid "Warning... %s for device %s exited with signal %d."
msgstr "警告... 对设备 %2$s 的 %1$s 以信号 %3$d 退出。"

#: disk-utils/fsck.c:814
#, c-format
msgid "%s %s: status is %x, should never happen."
msgstr "%s %s：状态为 %x，这不应该发生。"

#: disk-utils/fsck.c:860
#, c-format
msgid "Finished with %s (exit status %d)\n"
msgstr "以 %s 结束(退出状态为 %d)\n"

#: disk-utils/fsck.c:941
#, c-format
msgid "error %d (%s) while executing fsck.%s for %s"
msgstr "错误 %d（%s）出现在执行 fsck.%s 时，用于 %s"

#: disk-utils/fsck.c:1007
msgid ""
"Either all or none of the filesystem types passed to -t must be prefixed\n"
"with 'no' or '!'."
msgstr "传递给 -t 选项的文件系统类型必须全部/全不以“no”或“!”为前缀。"

#: disk-utils/fsck.c:1123
#, c-format
msgid "%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
msgstr "%s：将跳过 /etc/fstab 中的错误行：fsck 通过次数非零的绑定式挂载"

#: disk-utils/fsck.c:1135
#, c-format
msgid "%s: skipping nonexistent device\n"
msgstr "%s：将跳过不存在的设备\n"

#: disk-utils/fsck.c:1140
#, c-format
msgid "%s: nonexistent device (\"nofail\" fstab option may be used to skip this device)\n"
msgstr "%s：设备不存在(可以使用fstab 选项“nofail”来跳过此设备)\n"

#: disk-utils/fsck.c:1157
#, c-format
msgid "%s: skipping unknown filesystem type\n"
msgstr "%s：跳过未知的文件系统类型\n"

#: disk-utils/fsck.c:1171
#, c-format
msgid "cannot check %s: fsck.%s not found"
msgstr "无法检查 %s：找不到 fsck.%s"

#: disk-utils/fsck.c:1275
msgid "Checking all file systems.\n"
msgstr "正在检查所有文件系统。\n"

# pass number 是fstab中定义的，不为0则每次检测
#: disk-utils/fsck.c:1366
#, c-format
msgid "--waiting-- (pass %d)\n"
msgstr "--等待中-- (第 %d 遍)\n"

#: disk-utils/fsck.c:1392
#, c-format
msgid " %s [options] -- [fs-options] [<filesystem> ...]\n"
msgstr " %s [选项] -- [文件系统选项] [<文件系统> ...]\n"

#: disk-utils/fsck.c:1396
msgid "Check and repair a Linux filesystem.\n"
msgstr "检查并修复 Linux 文件系统。\n"

#: disk-utils/fsck.c:1399
msgid " -A         check all filesystems\n"
msgstr " -A         检查所有文件系统\n"

#: disk-utils/fsck.c:1400
msgid " -C [<fd>]  display progress bar; file descriptor is for GUIs\n"
msgstr " -C [<fd>]  显示进度条；文件描述符 fd 用于图形用户界面\n"

#: disk-utils/fsck.c:1401
msgid " -l         lock the device to guarantee exclusive access\n"
msgstr " -l         锁定设备以确保独占访问\n"

#: disk-utils/fsck.c:1402
msgid " -M         do not check mounted filesystems\n"
msgstr " -M         不检查已挂臷的文件系统\n"

#: disk-utils/fsck.c:1403
msgid " -N         do not execute, just show what would be done\n"
msgstr " -N         不执行，只显示将执行的操作\n"

#: disk-utils/fsck.c:1404
msgid " -P         check filesystems in parallel, including root\n"
msgstr " -P         并行检查文件系统，包括 root\n"

#: disk-utils/fsck.c:1405
msgid " -R         skip root filesystem; useful only with '-A'\n"
msgstr " -R         跳过根文件系统；只在指定 '-A' 时有用\n"

#: disk-utils/fsck.c:1406
msgid ""
" -r [<fd>]  report statistics for each device checked;\n"
"            file descriptor is for GUIs\n"
msgstr ""
" -r [<fd>]  报告对每个已检查设备的统计；\n"
"            文件描述符用于 GUI\n"

#: disk-utils/fsck.c:1408
msgid " -s         serialize the checking operations\n"
msgstr " -s         串行化检查操作\n"

#: disk-utils/fsck.c:1409
msgid " -T         do not show the title on startup\n"
msgstr " -T         启动时不显示标题\n"

#: disk-utils/fsck.c:1410
msgid ""
" -t <type>  specify filesystem types to be checked;\n"
"            <type> is allowed to be a comma-separated list\n"
msgstr ""
" -t <类型>  指定要检查的文件系统类型；\n"
"             <类型> 可以是以英文逗号分隔的列表\n"

#: disk-utils/fsck.c:1412
msgid " -V         explain what is being done\n"
msgstr " -V         解释正在进行的操作\n"

#: disk-utils/fsck.c:1418
msgid "See the specific fsck.* commands for available fs-options."
msgstr "参见特定的 fsck.* 命令了解可用的文件系统选项。"

#: disk-utils/fsck.c:1463
msgid "too many devices"
msgstr "设备过多"

#: disk-utils/fsck.c:1475
msgid "Is /proc mounted?"
msgstr "/proc 挂载了吗？"

#: disk-utils/fsck.c:1483
#, c-format
msgid "must be root to scan for matching filesystems: %s"
msgstr "必须以 root 用户进行匹配文件系统扫描：%s"

#: disk-utils/fsck.c:1487
#, c-format
msgid "couldn't find matching filesystem: %s"
msgstr "找不到匹配的文件系统：%s"

#: disk-utils/fsck.c:1495 disk-utils/fsck.c:1592 misc-utils/kill.c:286
#: sys-utils/eject.c:281
msgid "too many arguments"
msgstr "参数过多"

#: disk-utils/fsck.c:1550 disk-utils/fsck.c:1553
msgid "invalid argument of -r"
msgstr "-r 的参数无效"

#: disk-utils/fsck.c:1565
#, c-format
msgid "option '%s' may be specified only once"
msgstr "选项“%s”只能指定一次"

#: disk-utils/fsck.c:1572 misc-utils/kill.c:336 misc-utils/kill.c:352
#, c-format
msgid "option '%s' requires an argument"
msgstr "“%s”选项需要一个参数"

#: disk-utils/fsck.c:1603
#, c-format
msgid "invalid argument of -r: %d"
msgstr "-r 的参数无效：%d"

#: disk-utils/fsck.c:1648
msgid "the -l option can be used with one device only -- ignore"
msgstr "-l 选项只能用于一个设备 -- 忽略"

#: disk-utils/fsck.cramfs.c:117
#, c-format
msgid " %s [options] <file>\n"
msgstr " %s [选项] <文件>\n"

#: disk-utils/fsck.cramfs.c:120
msgid "Check and repair a compressed ROM filesystem.\n"
msgstr "检查并修复压缩的 ROM 文件系统。\n"

#: disk-utils/fsck.cramfs.c:123
msgid " -a                       for compatibility only, ignored\n"
msgstr " -a                       纯兼容性选项，忽略\n"

#: disk-utils/fsck.cramfs.c:124
msgid " -v, --verbose            be more verbose\n"
msgstr " -v, --verbose            更详尽\n"

#: disk-utils/fsck.cramfs.c:125
msgid " -y                       for compatibility only, ignored\n"
msgstr " -y                       纯兼容性选项，忽略\n"

#: disk-utils/fsck.cramfs.c:126
msgid " -b, --blocksize <size>   use this blocksize, defaults to page size\n"
msgstr " -b, --blocksize <大小>   使用指定的块大小，默认为页的大小\n"

#: disk-utils/fsck.cramfs.c:127
msgid "     --extract[=<dir>]    test uncompression, optionally extract into <dir>\n"
msgstr "     --extract[=<目录>]    测试解压，可指定解压到<目录>\n"

#: disk-utils/fsck.cramfs.c:167
#, c-format
msgid "ioctl failed: unable to determine device size: %s"
msgstr "ioctl 失败：无法确定设备大小：%s"

#: disk-utils/fsck.cramfs.c:172
#, c-format
msgid "not a block device or file: %s"
msgstr "不是一个块设备或文件：%s"

#: disk-utils/fsck.cramfs.c:175 disk-utils/fsck.cramfs.c:211
msgid "file length too short"
msgstr "文件长度过短"

#: disk-utils/fsck.cramfs.c:184 disk-utils/fsck.cramfs.c:239
#: disk-utils/fsck.cramfs.c:259 libfdisk/src/bsd.c:719 libfdisk/src/bsd.c:901
#: login-utils/last.c:210 login-utils/last.c:244 sys-utils/fallocate.c:206
#, c-format
msgid "seek on %s failed"
msgstr "在 %s 上定位失败"

#: disk-utils/fsck.cramfs.c:190 disk-utils/fsck.cramfs.c:192
msgid "superblock magic not found"
msgstr "超级块魔数(magic)未找到"

#: disk-utils/fsck.cramfs.c:195
#, c-format
msgid "cramfs endianness is %s\n"
msgstr "cramfs 大小端为 %s\n"

#: disk-utils/fsck.cramfs.c:196
msgid "big"
msgstr "大端"

#: disk-utils/fsck.cramfs.c:196
msgid "little"
msgstr "小端"

#: disk-utils/fsck.cramfs.c:200
msgid "unsupported filesystem features"
msgstr "不支持的文件系统特性"

#: disk-utils/fsck.cramfs.c:204
#, c-format
msgid "superblock size (%d) too small"
msgstr "超级块尺寸(%d)过小"

#: disk-utils/fsck.cramfs.c:209
msgid "zero file count"
msgstr "零文件计数"

#: disk-utils/fsck.cramfs.c:213
msgid "file extends past end of filesystem"
msgstr "警告：文件超过了文件系统终点"

#: disk-utils/fsck.cramfs.c:215
msgid "old cramfs format"
msgstr "旧的 cramfs 格式"

#: disk-utils/fsck.cramfs.c:224
msgid "unable to test CRC: old cramfs format"
msgstr "无法检测 CRC：旧的 cramfs 格式"

#: disk-utils/fsck.cramfs.c:244
#, c-format
msgid "failed to read %<PRIu32> bytes from file %s"
msgstr "读取 %<PRIu32> 字节（读自文件 %s）时失败"

#: disk-utils/fsck.cramfs.c:282
msgid "crc error"
msgstr "crc 错误"

#: disk-utils/fsck.cramfs.c:312 disk-utils/fsck.minix.c:558
msgid "seek failed"
msgstr "定位失败"

#: disk-utils/fsck.cramfs.c:316
msgid "read romfs failed"
msgstr "读取 romfs 失败"

#: disk-utils/fsck.cramfs.c:348
msgid "root inode is not directory"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.cramfs.c:352
#, c-format
msgid "bad root offset (%lu)"
msgstr "错误的根偏移(%lu)"

#: disk-utils/fsck.cramfs.c:370
msgid "data block too large"
msgstr "数据块过大"

#: disk-utils/fsck.cramfs.c:374
#, c-format
msgid "decompression error: %s"
msgstr "解压出错：%s"

#: disk-utils/fsck.cramfs.c:400
#, c-format
msgid "  hole at %lu (%zu)\n"
msgstr "  位于 %lu 的空洞(%zu)\n"

#: disk-utils/fsck.cramfs.c:407 disk-utils/fsck.cramfs.c:582
#, c-format
msgid "  uncompressing block at %lu to %lu (%lu)\n"
msgstr "  正在将 %lu 处的块解压到 %lu (%lu)\n"

#: disk-utils/fsck.cramfs.c:414
#, c-format
msgid "non-block (%ld) bytes"
msgstr "非块(%ld)字节 "

#: disk-utils/fsck.cramfs.c:418
#, c-format
msgid "non-size (%ld vs %ld) bytes"
msgstr "无大小(%ld ： %ld)字节"

#: disk-utils/fsck.cramfs.c:423 disk-utils/fsck.cramfs.c:548
#: disk-utils/swaplabel.c:109 misc-utils/uuidd.c:407 sys-utils/fallocate.c:440
#: sys-utils/rfkill.c:565 sys-utils/setpriv.c:628 sys-utils/setpriv.c:651
#: sys-utils/swapon.c:400 term-utils/script.c:322 term-utils/ttymsg.c:175
#, c-format
msgid "write failed: %s"
msgstr "写失败：%s"

#: disk-utils/fsck.cramfs.c:433
#, c-format
msgid "lchown failed: %s"
msgstr "lchown 失败：%s"

#: disk-utils/fsck.cramfs.c:437
#, fuzzy, c-format
#| msgid "mknod failed: %s"
msgid "chmod failed: %s"
msgstr "mknod 失败：%s"

#: disk-utils/fsck.cramfs.c:442
#, c-format
msgid "utimes failed: %s"
msgstr "utimes 失败：%s"

#: disk-utils/fsck.cramfs.c:471
#, c-format
msgid "directory inode has zero offset and non-zero size: %s"
msgstr "目录 inode 偏移为 0，大小不为 0：%s"

#: disk-utils/fsck.cramfs.c:486
#, c-format
msgid "mkdir failed: %s"
msgstr "mkdir 失败：%s"

#: disk-utils/fsck.cramfs.c:502
#, fuzzy
#| msgid " -file dumpfilename\n"
msgid "illegal filename"
msgstr " -file dumpfilename\n"

#: disk-utils/fsck.cramfs.c:504
#, fuzzy
#| msgid "Enter script file name"
msgid "dangerous filename"
msgstr "输入脚本文件名"

#: disk-utils/fsck.cramfs.c:508
msgid "filename length is zero"
msgstr "文件名长度为 0"

#: disk-utils/fsck.cramfs.c:510
msgid "bad filename length"
msgstr "文件名长度有误"

#: disk-utils/fsck.cramfs.c:516
msgid "bad inode offset"
msgstr "inode 偏移有误"

#: disk-utils/fsck.cramfs.c:531
msgid "file inode has zero offset and non-zero size"
msgstr "文件 inode 偏移为 0，大小不为 0"

#: disk-utils/fsck.cramfs.c:534
msgid "file inode has zero size and non-zero offset"
msgstr "文件 inode 大小为 0，偏移不为 0"

#: disk-utils/fsck.cramfs.c:563
msgid "symbolic link has zero offset"
msgstr "符号链接偏移为 0"

#: disk-utils/fsck.cramfs.c:565
msgid "symbolic link has zero size"
msgstr "符号链接大小为 0"

#: disk-utils/fsck.cramfs.c:574
#, c-format
msgid "size error in symlink: %s"
msgstr "符号链接大小出错：%s"

#: disk-utils/fsck.cramfs.c:588
#, c-format
msgid "symlink failed: %s"
msgstr "symlink 失败：%s"

#: disk-utils/fsck.cramfs.c:601
#, c-format
msgid "special file has non-zero offset: %s"
msgstr "特殊文件的偏移不为 0：%s"

#: disk-utils/fsck.cramfs.c:611
#, c-format
msgid "fifo has non-zero size: %s"
msgstr "FIFO 的大小不为 0：%s"

#: disk-utils/fsck.cramfs.c:617
#, c-format
msgid "socket has non-zero size: %s"
msgstr "套接字的大小不为 0：%s"

#: disk-utils/fsck.cramfs.c:620
#, c-format
msgid "bogus mode: %s (%o)"
msgstr "伪(bogus)模式：%s (%o)"

#: disk-utils/fsck.cramfs.c:629
#, c-format
msgid "mknod failed: %s"
msgstr "mknod 失败：%s"

#: disk-utils/fsck.cramfs.c:661
#, c-format
msgid "directory data start (%lu) < sizeof(struct cramfs_super) + start (%zu)"
msgstr "目录数据起点(%lu) < sizeof(struct cramfs_super) + 起点 (%zu)"

#: disk-utils/fsck.cramfs.c:665
#, c-format
msgid "directory data end (%lu) != file data start (%lu)"
msgstr "目录数据终点 (%lu) != 文件数据起点 (%lu)"

#: disk-utils/fsck.cramfs.c:669
msgid "invalid file data offset"
msgstr "无效的文件数据偏移"

#: disk-utils/fsck.cramfs.c:716 disk-utils/mkfs.cramfs.c:741
msgid "invalid blocksize argument"
msgstr "无效的 块大小 参数"

#: disk-utils/fsck.cramfs.c:750
#, c-format
msgid "%s: OK\n"
msgstr "%s：OK\n"

#: disk-utils/fsck.minix.c:185
msgid "Check the consistency of a Minix filesystem.\n"
msgstr "检查 Minix 文件系统的一致性。\n"

#: disk-utils/fsck.minix.c:187
msgid " -l, --list       list all filenames\n"
msgstr " -l, --list       列出所有文件名\n"

#: disk-utils/fsck.minix.c:188
msgid " -a, --auto       automatic repair\n"
msgstr " -a, --auto      自动修复\n"

#: disk-utils/fsck.minix.c:189
msgid " -r, --repair     interactive repair\n"
msgstr " -r, --repair     交互修复\n"

#: disk-utils/fsck.minix.c:190
msgid " -v, --verbose    be verbose\n"
msgstr " -v, --verbose    详尽方式\n"

#: disk-utils/fsck.minix.c:191
msgid " -s, --super      output super-block information\n"
msgstr " -s, --super      输出超级块信息\n"

#: disk-utils/fsck.minix.c:192
msgid " -m, --uncleared  activate mode not cleared warnings\n"
msgstr " -m, --uncleared  激活 模式未清除 警告\n"

#: disk-utils/fsck.minix.c:193
msgid " -f, --force      force check\n"
msgstr " -f, --force      强制检查\n"

#. TRANSLATORS: these yes no questions uses rpmatch(), and should be
#. * translated.
#: disk-utils/fsck.minix.c:252
#, c-format
msgid "%s (y/n)? "
msgstr "%s (是/否)? "

#: disk-utils/fsck.minix.c:252
#, c-format
msgid "%s (n/y)? "
msgstr "%s (否/是)? "

#: disk-utils/fsck.minix.c:269
#, c-format
msgid "y\n"
msgstr "是\n"

#: disk-utils/fsck.minix.c:271
#, c-format
msgid "n\n"
msgstr "否\n"

#: disk-utils/fsck.minix.c:287
#, c-format
msgid "%s is mounted.\t "
msgstr "%s 已经挂载。\t"

#: disk-utils/fsck.minix.c:289
msgid "Do you really want to continue"
msgstr "您确认要继续吗"

#: disk-utils/fsck.minix.c:293
#, c-format
msgid "check aborted.\n"
msgstr "检查中止。\n"

#: disk-utils/fsck.minix.c:318 disk-utils/fsck.minix.c:339
#, c-format
msgid "Zone nr < FIRSTZONE in file `%s'."
msgstr "nr 区 < 文件“%s”中的 FIRSTZONE。"

#: disk-utils/fsck.minix.c:321 disk-utils/fsck.minix.c:342
#, c-format
msgid "Zone nr >= ZONES in file `%s'."
msgstr "nr 区 >= 文件“%s”中的 FIRSTZONE。"

#: disk-utils/fsck.minix.c:325 disk-utils/fsck.minix.c:346
msgid "Remove block"
msgstr "删除块"

#: disk-utils/fsck.minix.c:362
#, c-format
msgid "Read error: unable to seek to block in file '%s'\n"
msgstr "读取错误: 无法在文件 '%s' 中定位到该块\n"

#: disk-utils/fsck.minix.c:368
#, c-format
msgid "Read error: bad block in file '%s'\n"
msgstr "读取错误: 文件 '%s' 中有坏块\n"

#: disk-utils/fsck.minix.c:380
#, c-format
msgid ""
"Internal error: trying to write bad block\n"
"Write request ignored\n"
msgstr ""
"内部错误: 试图写坏块\n"
"写请求忽略\n"

#: disk-utils/fsck.minix.c:386
msgid "seek failed in write_block"
msgstr "在 write_block 中定位失败"

#: disk-utils/fsck.minix.c:389
#, c-format
msgid "Write error: bad block in file '%s'\n"
msgstr "写入错误: 文件 '%s' 中有坏块\n"

#: disk-utils/fsck.minix.c:423
#, c-format
msgid "Warning: block out of range\n"
msgstr "警告: 块超出范围\n"

#: disk-utils/fsck.minix.c:510
msgid "seek failed in write_super_block"
msgstr "在 write_super_block 中定位失败"

#: disk-utils/fsck.minix.c:512
msgid "unable to write super-block"
msgstr "不能写超级块"

#: disk-utils/fsck.minix.c:524
msgid "Unable to write inode map"
msgstr "不能写 inode map"

#: disk-utils/fsck.minix.c:527
msgid "Unable to write zone map"
msgstr "不能写 zone map"

#: disk-utils/fsck.minix.c:530
msgid "Unable to write inodes"
msgstr "不能写 inodes"

#: disk-utils/fsck.minix.c:562
msgid "unable to alloc buffer for superblock"
msgstr "无法为超级块分配缓冲区"

#: disk-utils/fsck.minix.c:565
msgid "unable to read super block"
msgstr "不能读超级块"

#: disk-utils/fsck.minix.c:587
msgid "bad magic number in super-block"
msgstr "超级块中的魔数数字损坏"

#: disk-utils/fsck.minix.c:589
msgid "Only 1k blocks/zones supported"
msgstr "只支持 1k 块/区"

#: disk-utils/fsck.minix.c:591
msgid "bad s_ninodes field in super-block"
msgstr "超级块中有不正确的 s_ninodes 字段"

#: disk-utils/fsck.minix.c:593
msgid "bad s_imap_blocks field in super-block"
msgstr "不正确的 s_imap_blocks 域在超级块中"

#: disk-utils/fsck.minix.c:595
msgid "bad s_firstdatazone field in super-block"
msgstr "超级块中有不正确的 s_firstdatazone 字段"

#: disk-utils/fsck.minix.c:598
msgid "bad s_zmap_blocks field in super-block"
msgstr "不正确的 s_zmap_blocks 域在超级块中"

#: disk-utils/fsck.minix.c:614
msgid "Unable to allocate buffer for inode map"
msgstr "不能为 inode map 分配缓冲区"

#: disk-utils/fsck.minix.c:617
msgid "Unable to allocate buffer for zone map"
msgstr "不能为 zone map 分配缓冲区"

#: disk-utils/fsck.minix.c:620
msgid "Unable to allocate buffer for inodes"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/fsck.minix.c:623
msgid "Unable to allocate buffer for inode count"
msgstr "不能为 inode count 分配缓冲区"

#: disk-utils/fsck.minix.c:626
msgid "Unable to allocate buffer for zone count"
msgstr "不能为 zone count 分配缓冲区"

#: disk-utils/fsck.minix.c:630
msgid "Unable to read inode map"
msgstr "不能读 inode map"

#: disk-utils/fsck.minix.c:634
msgid "Unable to read zone map"
msgstr "不能读 zone map"

#: disk-utils/fsck.minix.c:638
msgid "Unable to read inodes"
msgstr "不能读 inodes"

#: disk-utils/fsck.minix.c:640
#, c-format
msgid "Warning: Firstzone != Norm_firstzone\n"
msgstr "警告: Firstzone != Norm_firstzone\n"

#: disk-utils/fsck.minix.c:645
#, c-format
msgid "%ld inodes\n"
msgstr "%ld 个inode\n"

#: disk-utils/fsck.minix.c:646
#, c-format
msgid "%ld blocks\n"
msgstr "%ld 块\n"

#: disk-utils/fsck.minix.c:647 disk-utils/mkfs.minix.c:571
#, c-format
msgid "Firstdatazone=%jd (%jd)\n"
msgstr "首个数据区=%jd (%jd)\n"

#: disk-utils/fsck.minix.c:649
#, c-format
msgid "Zonesize=%d\n"
msgstr "区大小=%d\n"

#: disk-utils/fsck.minix.c:650
#, c-format
msgid "Maxsize=%zu\n"
msgstr "最大尺寸=%zu\n"

#: disk-utils/fsck.minix.c:652
#, c-format
msgid "Filesystem state=%d\n"
msgstr "文件系统状态=%d\n"

#: disk-utils/fsck.minix.c:653
#, c-format
msgid ""
"namelen=%zd\n"
"\n"
msgstr ""
"名称长度=%zd\n"
"\n"

#: disk-utils/fsck.minix.c:668 disk-utils/fsck.minix.c:718
#, c-format
msgid "Inode %d marked unused, but used for file '%s'\n"
msgstr "Inode %d 标记为未使用, 但用于文件 '%s'\n"

#: disk-utils/fsck.minix.c:671 disk-utils/fsck.minix.c:721
msgid "Mark in use"
msgstr "标记为已使用"

#: disk-utils/fsck.minix.c:693 disk-utils/fsck.minix.c:741
#, c-format
msgid "The file `%s' has mode %05o\n"
msgstr "文件 `%s' 的模式 %05o\n"

#: disk-utils/fsck.minix.c:700 disk-utils/fsck.minix.c:747
#, c-format
msgid "Warning: inode count too big.\n"
msgstr "警告: inode 计数太大.\n"

#: disk-utils/fsck.minix.c:759 disk-utils/fsck.minix.c:767
msgid "root inode isn't a directory"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.minix.c:779 disk-utils/fsck.minix.c:810
#, c-format
msgid "Block has been used before. Now in file `%s'."
msgstr "块已经被使用, 现在在文件 `%s' 中."

#: disk-utils/fsck.minix.c:781 disk-utils/fsck.minix.c:812
#: disk-utils/fsck.minix.c:1145 disk-utils/fsck.minix.c:1154
#: disk-utils/fsck.minix.c:1201 disk-utils/fsck.minix.c:1210
msgid "Clear"
msgstr "清除"

#: disk-utils/fsck.minix.c:791 disk-utils/fsck.minix.c:822
#, c-format
msgid "Block %d in file `%s' is marked not in use."
msgstr "文件中块 %d `%s' 标记为没有使用."

#: disk-utils/fsck.minix.c:793 disk-utils/fsck.minix.c:824
msgid "Correct"
msgstr "正确"

#: disk-utils/fsck.minix.c:963 disk-utils/fsck.minix.c:1036
#, c-format
msgid "The directory '%s' contains a bad inode number for file '%.*s'."
msgstr "目录 '%s' 包含了一个不正确的 inode number 文件 '%.*s'. "

#: disk-utils/fsck.minix.c:965 disk-utils/fsck.minix.c:1038
msgid " Remove"
msgstr " 删除"

#: disk-utils/fsck.minix.c:981 disk-utils/fsck.minix.c:1054
#, c-format
msgid "%s: bad directory: '.' isn't first\n"
msgstr "%s: 不正确的目录: '.' 不是第一个\n"

#: disk-utils/fsck.minix.c:990 disk-utils/fsck.minix.c:1063
#, c-format
msgid "%s: bad directory: '..' isn't second\n"
msgstr "%s: 不正确的目录: '.' 不是第二个\n"

#: disk-utils/fsck.minix.c:1096 disk-utils/fsck.minix.c:1119
msgid "internal error"
msgstr "内部错误"

#: disk-utils/fsck.minix.c:1099 disk-utils/fsck.minix.c:1122
#, c-format
msgid "%s: bad directory: size < 32"
msgstr "%s: 不正确的目录: 大小 < 32"

#: disk-utils/fsck.minix.c:1105
#, c-format
msgid "%s: bad directory: invalid i_zone, use --repair to fix\n"
msgstr "%s: 目录错误: i_zone 无效，请用 --repair 修复\n"

#: disk-utils/fsck.minix.c:1134
msgid "seek failed in bad_zone"
msgstr "bad_zone 中定位失败"

#: disk-utils/fsck.minix.c:1144 disk-utils/fsck.minix.c:1200
#, c-format
msgid "Inode %lu mode not cleared."
msgstr "Inode %lu 模式未清除。"

#: disk-utils/fsck.minix.c:1153 disk-utils/fsck.minix.c:1209
#, c-format
msgid "Inode %lu not used, marked used in the bitmap."
msgstr "Inode %lu 未使用，但在位图(bitmap)中标记为已使用。"

#: disk-utils/fsck.minix.c:1159 disk-utils/fsck.minix.c:1215
#, c-format
msgid "Inode %lu used, marked unused in the bitmap."
msgstr "Inode %lu 已使用，但在位图(bitmap)中标记为未使用。"

#: disk-utils/fsck.minix.c:1160 disk-utils/fsck.minix.c:1216
msgid "Set"
msgstr "设置"

#: disk-utils/fsck.minix.c:1164 disk-utils/fsck.minix.c:1220
#, c-format
msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
msgstr "Inode %lu (模式 = %07o), i_nlinks=%d, 已计数=%d。"

#: disk-utils/fsck.minix.c:1167 disk-utils/fsck.minix.c:1223
msgid "Set i_nlinks to count"
msgstr "将 i_nlinks 设为计数"

#: disk-utils/fsck.minix.c:1179 disk-utils/fsck.minix.c:1235
#, c-format
msgid "Zone %lu: marked in use, no file uses it."
msgstr "%lu 区：标记为使用，但没有文件使用它。"

#: disk-utils/fsck.minix.c:1181 disk-utils/fsck.minix.c:1237
msgid "Unmark"
msgstr "清标记"

#: disk-utils/fsck.minix.c:1186 disk-utils/fsck.minix.c:1242
#, c-format
msgid "Zone %lu: in use, counted=%d\n"
msgstr "区 %lu：使用中，已计数=%d\n"

#: disk-utils/fsck.minix.c:1189 disk-utils/fsck.minix.c:1245
#, c-format
msgid "Zone %lu: not in use, counted=%d\n"
msgstr "区 %lu：未使用，已计数=%d\n"

#: disk-utils/fsck.minix.c:1295
msgid "bad inode size"
msgstr "inode 大小有误"

#: disk-utils/fsck.minix.c:1297
msgid "bad v2 inode size"
msgstr "v2 inode 大小有误"

#: disk-utils/fsck.minix.c:1341
msgid "need terminal for interactive repairs"
msgstr "需要终端来进行交互式修复"

#: disk-utils/fsck.minix.c:1345
#, c-format
msgid "cannot open %s: %s"
msgstr "无法打开 %s：%s"

#: disk-utils/fsck.minix.c:1356
#, c-format
msgid "%s is clean, no check.\n"
msgstr "%s 是干净的，不检查。\n"

#: disk-utils/fsck.minix.c:1361
#, c-format
msgid "Forcing filesystem check on %s.\n"
msgstr "强制在 %s 上进行文件系统检查。\n"

#: disk-utils/fsck.minix.c:1363
#, c-format
msgid "Filesystem on %s is dirty, needs checking.\n"
msgstr "%s 上的文件系统有问题，需要检查。\n"

#: disk-utils/fsck.minix.c:1395
#, c-format
msgid ""
"\n"
"%6ld inodes used (%ld%%)\n"
msgstr ""
"\n"
"已使用 %6ld inodes(%ld%%)\n"

#: disk-utils/fsck.minix.c:1401
#, c-format
msgid "%6ld zones used (%ld%%)\n"
msgstr "已使用 %6ld 区(%ld%%)\n"

#: disk-utils/fsck.minix.c:1403
#, c-format
msgid ""
"\n"
"%6d regular files\n"
"%6d directories\n"
"%6d character device files\n"
"%6d block device files\n"
"%6d links\n"
"%6d symbolic links\n"
"------\n"
"%6d files\n"
msgstr ""
"\n"
"%6d 个常规文件\n"
"%6d 个目录\n"
"%6d 个字符设备文件\n"
"%6d 个块设备文件\n"
"%6d 个链接\n"
"%6d 个符号链接\n"
"------\n"
"%6d 个文件\n"

#: disk-utils/fsck.minix.c:1417
#, c-format
msgid ""
"----------------------------\n"
"FILE SYSTEM HAS BEEN CHANGED\n"
"----------------------------\n"
msgstr ""
"----------------\n"
"文件系统已经更改\n"
"----------------\n"

#: disk-utils/fsck.minix.c:1429 disk-utils/mkfs.minix.c:854
#: disk-utils/mkswap.c:737 disk-utils/partx.c:1071 disk-utils/resizepart.c:115
#: login-utils/utmpdump.c:408 sys-utils/dmesg.c:684 sys-utils/wdctl.c:457
#: sys-utils/wdctl.c:536 term-utils/setterm.c:908 text-utils/col.c:195
#: text-utils/pg.c:1255
msgid "write failed"
msgstr "写失败"

#: disk-utils/isosize.c:57
#, c-format
msgid "%s: might not be an ISO filesystem"
msgstr "%s：可能不是 ISO 文件系统"

#: disk-utils/isosize.c:62 disk-utils/isosize.c:64
#, c-format
msgid "read error on %s"
msgstr "%s 读出错"

#: disk-utils/isosize.c:75
#, c-format
msgid "sector count: %d, sector size: %d\n"
msgstr "扇区计数：%d，扇区大小：%d\n"

#: disk-utils/isosize.c:99
#, c-format
msgid " %s [options] <iso9660_image_file> ...\n"
msgstr " %s [选项] <iso9660镜像文件> ...\n"

#: disk-utils/isosize.c:103
msgid "Show the length of an ISO-9660 filesystem.\n"
msgstr "显示 ISO-9660 文件系统的长度。\n"

#: disk-utils/isosize.c:106
msgid " -d, --divisor=<number>  divide the amount of bytes by <number>\n"
msgstr " -d, --divisor=<数字>    将字节数除以 <数字>\n"

#: disk-utils/isosize.c:107
msgid " -x, --sectors           show sector count and size\n"
msgstr " -x, --sectors           显示扇区计数和大小\n"

#: disk-utils/isosize.c:138
msgid "invalid divisor argument"
msgstr "无效的 divisor(除数) 参数"

#: disk-utils/mkfs.bfs.c:75
#, c-format
msgid "Usage: %s [options] device [block-count]\n"
msgstr "Usage: %s [选项] 设备 [块数]\n"

#: disk-utils/mkfs.bfs.c:79
msgid "Make an SCO bfs filesystem.\n"
msgstr "制作 SCO bfs 文件系统。\n"

#: disk-utils/mkfs.bfs.c:81
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "Options:\n"
#| " -N, --inodes=NUM    specify desired number of inodes\n"
#| " -V, --vname=NAME    specify volume name\n"
#| " -F, --fname=NAME    specify file system name\n"
#| " -v, --verbose       explain what is being done\n"
#| " -c                  this option is silently ignored\n"
#| " -l                  this option is silently ignored\n"
msgid ""
"\n"
"Options:\n"
" -N, --inodes=NUM    specify desired number of inodes\n"
" -V, --vname=NAME    specify volume name\n"
" -F, --fname=NAME    specify file system name\n"
" -v, --verbose       explain what is being done\n"
" -c                  this option is silently ignored\n"
" -l                  this option is silently ignored\n"
" --lock[=<mode>]     use exclusive device lock (yes, no or nonblock)\n"
msgstr ""
"\n"
"选项：\n"
" -N, --inodes=NUM    指定希望的 inodes 数目\n"
" -V, --vname=NAME    指定卷名\n"
" -F, --fname=NAME    指定文件系统名\n"
" -v, --verbose       解释正在进行的操作\n"
" -c                  此选项将被忽略，不做提示\n"
" -l                  此选项将被忽略，不做提示\n"

#: disk-utils/mkfs.bfs.c:146
msgid "invalid number of inodes"
msgstr "无效的 inodes 数目"

#: disk-utils/mkfs.bfs.c:152
msgid "volume name too long"
msgstr "卷名过长"

#: disk-utils/mkfs.bfs.c:159
msgid "fsname name too long"
msgstr "fsname 名过长"

#: disk-utils/mkfs.bfs.c:209
msgid "invalid block-count"
msgstr "无效的块计数"

#: disk-utils/mkfs.bfs.c:217
#, c-format
msgid "cannot get size of %s"
msgstr "无法获得 %s 的大小"

#: disk-utils/mkfs.bfs.c:222
#, c-format
msgid "blocks argument too large, max is %llu"
msgstr "块参数过大，最大值是 %llu"

#: disk-utils/mkfs.bfs.c:237
msgid "too many inodes - max is 512"
msgstr "inodes 过多 - 最多 512"

#: disk-utils/mkfs.bfs.c:247
#, c-format
msgid "not enough space, need at least %llu blocks"
msgstr "空间不足，至少需要 %llu 个块"

#: disk-utils/mkfs.bfs.c:259
#, c-format
msgid "Device: %s\n"
msgstr "设备：%s\n"

#: disk-utils/mkfs.bfs.c:260
#, c-format
msgid "Volume: <%-6s>\n"
msgstr "卷：<%-6s>\n"

#: disk-utils/mkfs.bfs.c:261
#, c-format
msgid "FSname: <%-6s>\n"
msgstr "文件系统名：<%-6s>\n"

#: disk-utils/mkfs.bfs.c:262
#, c-format
msgid "BlockSize: %d\n"
msgstr "块大小：%d\n"

#: disk-utils/mkfs.bfs.c:264
#, c-format
msgid "Inodes: %ld (in 1 block)\n"
msgstr "Inodes：%ld (在 1 个块中)\n"

#: disk-utils/mkfs.bfs.c:267
#, c-format
msgid "Inodes: %ld (in %llu blocks)\n"
msgstr "Inodes：%ld (在 %llu 个块中)\n"

#: disk-utils/mkfs.bfs.c:269
#, c-format
msgid "Blocks: %llu\n"
msgstr "块：%llu\n"

#: disk-utils/mkfs.bfs.c:270
#, c-format
msgid "Inode end: %d, Data end: %d\n"
msgstr "Inode 终点：%d，数据终点：%d\n"

#: disk-utils/mkfs.bfs.c:275
msgid "error writing superblock"
msgstr "写超级块出错"

#: disk-utils/mkfs.bfs.c:296
msgid "error writing root inode"
msgstr "写根 inode 出错"

#: disk-utils/mkfs.bfs.c:301
msgid "error writing inode"
msgstr "写 inode 出错"

#: disk-utils/mkfs.bfs.c:304
msgid "seek error"
msgstr "定位出错"

#: disk-utils/mkfs.bfs.c:310
msgid "error writing . entry"
msgstr "写 . 记录出错"

#: disk-utils/mkfs.bfs.c:314
msgid "error writing .. entry"
msgstr "写 .. 记录出错"

#: disk-utils/mkfs.bfs.c:317
#, c-format
msgid "error closing %s"
msgstr "关闭 %s 出错"

#: disk-utils/mkfs.c:45
#, c-format
msgid " %s [options] [-t <type>] [fs-options] <device> [<size>]\n"
msgstr " %s [选项] [-t <类型>] [文件系统选项] <设备> [<大小>]\n"

#: disk-utils/mkfs.c:49
msgid "Make a Linux filesystem.\n"
msgstr "创建一个Linux 文件系统。\n"

#: disk-utils/mkfs.c:52
#, c-format
msgid " -t, --type=<type>  filesystem type; when unspecified, ext2 is used\n"
msgstr " -t, --type=<类型>  文件系统类型；若不指定，将使用 ext2\n"

#: disk-utils/mkfs.c:53
#, c-format
msgid "     fs-options     parameters for the real filesystem builder\n"
msgstr "     fs-options     实际文件系统构建程序的参数\n"

#: disk-utils/mkfs.c:54
#, c-format
msgid "     <device>       path to the device to be used\n"
msgstr "     <设备>         要使用设备的路径\n"

#: disk-utils/mkfs.c:55
#, c-format
msgid "     <size>         number of blocks to be used on the device\n"
msgstr "     <大小>         要使用设备上的块数\n"

#: disk-utils/mkfs.c:56
#, c-format
msgid ""
" -V, --verbose      explain what is being done;\n"
"                      specifying -V more than once will cause a dry-run\n"
msgstr ""
" -V, --verbose      解释正在进行的操作；\n"
"                      多次指定 -V 将导致空运行(dry-run)\n"

#: disk-utils/mkfs.c:133 include/c.h:310 login-utils/su-common.c:1290
#: login-utils/sulogin.c:864 login-utils/sulogin.c:868 sys-utils/flock.c:123
#: sys-utils/rtcwake.c:623
#, c-format
msgid "failed to execute %s"
msgstr "执行 %s 失败"

#: disk-utils/mkfs.cramfs.c:129
#, c-format
msgid " %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
msgstr " %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n 名称] dirname outfile\n"

#: disk-utils/mkfs.cramfs.c:132
msgid "Make compressed ROM file system."
msgstr "制作压缩的 ROM 文件系统"

#: disk-utils/mkfs.cramfs.c:134
msgid " -v             be verbose"
msgstr " -v             详尽模式"

#: disk-utils/mkfs.cramfs.c:135
msgid " -E             make all warnings errors (non-zero exit status)"
msgstr " -E             将所有警告当作错误（以非零退出值返回）"

#: disk-utils/mkfs.cramfs.c:136
msgid " -b blksize     use this blocksize, must equal page size"
msgstr " -b blksize     使用指定的块大小，必须等于页的大小"

#: disk-utils/mkfs.cramfs.c:137
msgid " -e edition     set edition number (part of fsid)"
msgstr " -e 版本        设置修订版本号（fsid 的一部分）"

#: disk-utils/mkfs.cramfs.c:138
#, c-format
msgid " -N endian      set cramfs endianness (%s|%s|%s), default %s\n"
msgstr " -N 大小端      设置 cramfs 大小端 (%s|%s|%s), 默认 %s\n"

#: disk-utils/mkfs.cramfs.c:139
msgid " -i file        insert a file image into the filesystem"
msgstr " -i 文件        将文件镜像插入文件系统"

#: disk-utils/mkfs.cramfs.c:140
msgid " -n name        set name of cramfs filesystem"
msgstr " -n 名称        设置 cramfs 文件系统的名称"

#: disk-utils/mkfs.cramfs.c:141
#, c-format
msgid " -p             pad by %d bytes for boot code\n"
msgstr " -p             为引导代码填充 %d 字节\n"

#: disk-utils/mkfs.cramfs.c:142
msgid " -s             sort directory entries (old option, ignored)"
msgstr " -s             对目录记录进行排序（旧选项，会被忽略）"

#: disk-utils/mkfs.cramfs.c:143
msgid " -z             make explicit holes"
msgstr " -z             产生显式空洞"

#: disk-utils/mkfs.cramfs.c:144
#, fuzzy
#| msgid "     --lock[=<mode>]     use exclusive device lock (%s, %s or %s)\n"
msgid " -l[=<mode>]    use exclusive device lock (yes, no or nonblock)"
msgstr "     --lock[=<模式>]     使用独占设备锁（%s、%s 或 %s）\n"

#: disk-utils/mkfs.cramfs.c:145
msgid " dirname        root of the filesystem to be compressed"
msgstr " dirname        要压缩的文件系统的根"

#: disk-utils/mkfs.cramfs.c:146
msgid " outfile        output file"
msgstr " outfile        输出文件"

#: disk-utils/mkfs.cramfs.c:166
#, c-format
msgid "readlink failed: %s"
msgstr "readlink 失败：%s"

#: disk-utils/mkfs.cramfs.c:311
#, c-format
msgid "could not read directory %s"
msgstr "无法读目录 %s"

#: disk-utils/mkfs.cramfs.c:446
msgid "filesystem too big.  Exiting."
msgstr "文件系统过大。将退出。"

#: disk-utils/mkfs.cramfs.c:605
#, c-format
msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
msgstr "AIEEE：块已“压缩”到 > 2*块长度(%ld)\n"

#: disk-utils/mkfs.cramfs.c:624
#, c-format
msgid "%6.2f%% (%+ld bytes)\t%s\n"
msgstr "%6.2f%% (%+ld 字节)\t%s\n"

#: disk-utils/mkfs.cramfs.c:669
#, c-format
msgid "cannot close file %s"
msgstr "无法关闭文件 %s"

#: disk-utils/mkfs.cramfs.c:747
msgid "invalid edition number argument"
msgstr "无效的修订版本号参数"

#: disk-utils/mkfs.cramfs.c:757
msgid "invalid endianness given; must be 'big', 'little', or 'host'"
msgstr "给定的大小端无效。必须为“big”、“little”或“host”"

#: disk-utils/mkfs.cramfs.c:833
#, c-format
msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB.  We might die prematurely."
msgstr "警告：估计需要的大小(上限)为 %lldMB，但最大镜像大小为 %uMB。程序可能提前终止(die)。"

#: disk-utils/mkfs.cramfs.c:857
msgid "ROM image map"
msgstr "ROM 镜像映射"

#: disk-utils/mkfs.cramfs.c:869
#, c-format
msgid "Including: %s\n"
msgstr "包含：%s\n"

#: disk-utils/mkfs.cramfs.c:875
#, c-format
msgid "Directory data: %zd bytes\n"
msgstr "目录数据：%zd 字节\n"

#: disk-utils/mkfs.cramfs.c:883
#, c-format
msgid "Everything: %zd kilobytes\n"
msgstr "全部：%zd KB\n"

#: disk-utils/mkfs.cramfs.c:888
#, c-format
msgid "Super block: %zd bytes\n"
msgstr "超级块：%zd 字节\n"

#: disk-utils/mkfs.cramfs.c:895
#, c-format
msgid "CRC: %x\n"
msgstr "CRC：%x\n"

#: disk-utils/mkfs.cramfs.c:900
#, c-format
msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
msgstr "为 ROM 镜像分配的空间不足(已分配 %lld，已使用 %zu)"

#: disk-utils/mkfs.cramfs.c:906
#, c-format
msgid "ROM image write failed (%zd %zd)"
msgstr "写 ROM 镜像失败(%zd %zd)"

#: disk-utils/mkfs.cramfs.c:909
msgid "ROM image"
msgstr "ROM 镜像"

#: disk-utils/mkfs.cramfs.c:918
#, c-format
msgid "warning: filenames truncated to %u bytes."
msgstr "警告：文件名被截短为 %u 个字节。"

#: disk-utils/mkfs.cramfs.c:920
msgid "warning: files were skipped due to errors."
msgstr "警告：由于错误，文件被跳过。"

#: disk-utils/mkfs.cramfs.c:922
#, c-format
msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
msgstr "警告：文件大小被截短为 %luMB(减 1 字节)。"

#: disk-utils/mkfs.cramfs.c:926
#, c-format
msgid "warning: uids truncated to %u bits.  (This may be a security concern.)"
msgstr "警告：uid 被截短为 %u 位。(可能有安全隐患。)"

#: disk-utils/mkfs.cramfs.c:929
#, c-format
msgid "warning: gids truncated to %u bits.  (This may be a security concern.)"
msgstr "警告：gid 被截短为 %u 位。(可能有安全隐患。)"

#: disk-utils/mkfs.cramfs.c:932
#, c-format
msgid ""
"WARNING: device numbers truncated to %u bits.  This almost certainly means\n"
"that some device files will be wrong."
msgstr "警告：设备号被截短为 %u 位。几乎可以肯定某些设备文件将出错。"

#: disk-utils/mkfs.minix.c:139
#, c-format
msgid " %s [options] /dev/name [blocks]\n"
msgstr " %s [选项] /dev/name [块数]\n"

#: disk-utils/mkfs.minix.c:141
msgid " -1                      use Minix version 1\n"
msgstr " -1                      使用 Minix 第 1 版\n"

#: disk-utils/mkfs.minix.c:142
msgid " -2, -v                  use Minix version 2\n"
msgstr " -2, -v                  使用 Minix 第 2 版\n"

#: disk-utils/mkfs.minix.c:143
msgid " -3                      use Minix version 3\n"
msgstr " -3                      使用 Minix 第 3 版\n"

#: disk-utils/mkfs.minix.c:144
msgid " -n, --namelength <num>  maximum length of filenames\n"
msgstr " -n, --namelength <数字> 文件名的最大长度\n"

#: disk-utils/mkfs.minix.c:145
msgid " -i, --inodes <num>      number of inodes for the filesystem\n"
msgstr " -i, --inodes <数字>     文件系统的 inode 数\n"

#: disk-utils/mkfs.minix.c:146
msgid " -c, --check             check the device for bad blocks\n"
msgstr " -c, --check             检查设备坏块\n"

#: disk-utils/mkfs.minix.c:147
msgid " -l, --badblocks <file>  list of bad blocks from file\n"
msgstr " -l, --badblocks <文件>  列出文件中的坏块\n"

#: disk-utils/mkfs.minix.c:149
#, c-format
msgid "     --lock[=<mode>]     use exclusive device lock (%s, %s or %s)\n"
msgstr "     --lock[=<模式>]     使用独占设备锁（%s、%s 或 %s）\n"

#: disk-utils/mkfs.minix.c:192
#, c-format
msgid "%s: seek to boot block failed  in write_tables"
msgstr "%s：在 write_tables 中定位到启动块失败"

#: disk-utils/mkfs.minix.c:195
#, c-format
msgid "%s: unable to clear boot sector"
msgstr "%s：无法清除启动扇区"

#: disk-utils/mkfs.minix.c:197
#, c-format
msgid "%s: seek failed in write_tables"
msgstr "%s：在 write_tables 中定位失败"

#: disk-utils/mkfs.minix.c:200
#, c-format
msgid "%s: unable to write super-block"
msgstr "%s：无法写超级块"

#: disk-utils/mkfs.minix.c:203
#, c-format
msgid "%s: unable to write inode map"
msgstr "%s：无法写 inode map"

#: disk-utils/mkfs.minix.c:206
#, c-format
msgid "%s: unable to write zone map"
msgstr "%s：无法写 zone map"

#: disk-utils/mkfs.minix.c:209
#, c-format
msgid "%s: unable to write inodes"
msgstr "%s：无法写 inodes"

#: disk-utils/mkfs.minix.c:214
#, c-format
msgid "%s: seek failed in write_block"
msgstr "%s：在 write_block 中定位失败"

#: disk-utils/mkfs.minix.c:217
#, c-format
msgid "%s: write failed in write_block"
msgstr "%s：在 write_block 中写入失败"

#: disk-utils/mkfs.minix.c:226 disk-utils/mkfs.minix.c:301
#: disk-utils/mkfs.minix.c:350
#, c-format
msgid "%s: too many bad blocks"
msgstr "%s：坏块太多"

#: disk-utils/mkfs.minix.c:234
#, c-format
msgid "%s: not enough good blocks"
msgstr "%s：好块不够"

#: disk-utils/mkfs.minix.c:549
#, c-format
msgid ""
"First data block at %jd, which is too far (max %d).\n"
"Try specifying fewer inodes by passing --inodes <num>"
msgstr ""
"第一个数据块位于 %jd，过远(最大为 %d)。\n"
"请尝试通过传递 --inodes <数值> 来指定更少的 inode"

#: disk-utils/mkfs.minix.c:569
#, c-format
msgid "%lu inode\n"
msgid_plural "%lu inodes\n"
msgstr[0] "%lu 个 inode\n"

#: disk-utils/mkfs.minix.c:570
#, c-format
msgid "%lu block\n"
msgid_plural "%lu blocks\n"
msgstr[0] "%lu 个块\n"

#: disk-utils/mkfs.minix.c:573
#, c-format
msgid "Zonesize=%zu\n"
msgstr "区大小=%zu\n"

#: disk-utils/mkfs.minix.c:574
#, c-format
msgid ""
"Maxsize=%zu\n"
"\n"
msgstr ""
"最大尺寸=%zu\n"
"\n"

#: disk-utils/mkfs.minix.c:587
#, c-format
msgid "%s: seek failed during testing of blocks"
msgstr "%s：在测试块时定位失败"

#: disk-utils/mkfs.minix.c:594
#, c-format
msgid "Weird values in do_check: probably bugs\n"
msgstr "do_check 中的值异常：可能有 bug\n"

#: disk-utils/mkfs.minix.c:627
#, c-format
msgid "%s: seek failed in check_blocks"
msgstr "%s：在 check_blocks 中定位失败"

#: disk-utils/mkfs.minix.c:637
#, c-format
msgid "%s: bad blocks before data-area: cannot make fs"
msgstr "%s：数据区前有坏块：无法创建文件系统"

#: disk-utils/mkfs.minix.c:644 disk-utils/mkfs.minix.c:668
#, c-format
msgid "%d bad block\n"
msgid_plural "%d bad blocks\n"
msgstr[0] "%d 个坏块\n"

#: disk-utils/mkfs.minix.c:653
#, c-format
msgid "%s: can't open file of bad blocks"
msgstr "%s: 打不开坏块文件"

#: disk-utils/mkfs.minix.c:658
#, c-format
msgid "badblock number input error on line %d\n"
msgstr "第 %d 行坏块数输入错误\n"

#: disk-utils/mkfs.minix.c:659
#, c-format
msgid "%s: cannot read badblocks file"
msgstr "%s: 打不开 badblocks 文件"

#: disk-utils/mkfs.minix.c:699
#, c-format
msgid "block size smaller than physical sector size of %s"
msgstr "块尺寸比 %s 的物理扇区尺寸小"

#: disk-utils/mkfs.minix.c:702 disk-utils/mkswap.c:349
#, c-format
msgid "cannot determine size of %s"
msgstr "无法确定 %s 的大小"

#: disk-utils/mkfs.minix.c:710
#, c-format
msgid "%s: requested blocks (%llu) exceeds available (%llu) blocks\n"
msgstr "%s：重复的块 (%llu) 超出可用的 (%llu) 块\n"

#: disk-utils/mkfs.minix.c:713
#, c-format
msgid "%s: number of blocks too small"
msgstr "%s：块数太小"

#: disk-utils/mkfs.minix.c:728 disk-utils/mkfs.minix.c:734
#, c-format
msgid "unsupported name length: %d"
msgstr "不支持的名字长度：%d"

#: disk-utils/mkfs.minix.c:737
#, c-format
msgid "unsupported minix file system version: %d"
msgstr " 不支持的 minix 文件系统版本：%d"

#: disk-utils/mkfs.minix.c:778
msgid "-v is ambiguous, use '-2' instead"
msgstr "-v 含义不清，请转用“-2”"

#: disk-utils/mkfs.minix.c:789
msgid "failed to parse maximum length of filenames"
msgstr "解析文件名最大长度失败"

#: disk-utils/mkfs.minix.c:793
msgid "failed to parse number of inodes"
msgstr "解析 inode 数 失败"

#: disk-utils/mkfs.minix.c:824
msgid "failed to parse number of blocks"
msgstr "解析块数失败"

#: disk-utils/mkfs.minix.c:832
#, c-format
msgid "%s is mounted; will not make a filesystem here!"
msgstr "%s 已挂载；将不会在此创建文件系统！"

#: disk-utils/mkswap.c:111
#, c-format
msgid "Bad user-specified page size %u"
msgstr "用户指定的页大小 %u 有误"

#: disk-utils/mkswap.c:114
#, c-format
msgid "Using user-specified page size %d, instead of the system value %d"
msgstr "将使用用户指定的页大小 %d 来取代系统值 %d"

#: disk-utils/mkswap.c:156
msgid "Label was truncated."
msgstr "标签已截短。"

#: disk-utils/mkswap.c:164
#, c-format
msgid "no label, "
msgstr "无标签，"

#: disk-utils/mkswap.c:172
#, c-format
msgid "no uuid\n"
msgstr "无 uuid\n"

#: disk-utils/mkswap.c:181
#, c-format
msgid " %s [options] device [size]\n"
msgstr " %s [选项] 设备 [大小]\n"

#: disk-utils/mkswap.c:184
msgid "Set up a Linux swap area.\n"
msgstr "设置 Linux 交换区。\n"

#: disk-utils/mkswap.c:187
msgid " -c, --check               check bad blocks before creating the swap area\n"
msgstr " -c, --check               创建交换区之前先检查设备坏块\n"

#: disk-utils/mkswap.c:188
msgid " -f, --force               allow swap size area be larger than device\n"
msgstr " -f, --force               允许交换区大小大于设备大小\n"

#: disk-utils/mkswap.c:189
msgid " -q, --quiet               suppress output and warning messages\n"
msgstr " -q, --quiet               禁止输出和警告信息\n"

#: disk-utils/mkswap.c:190
msgid " -p, --pagesize SIZE       specify page size in bytes\n"
msgstr " -p, --pagesize 大小       指定页面大小，以字节为单位\n"

#: disk-utils/mkswap.c:191
msgid " -L, --label LABEL         specify label\n"
msgstr " -L, --label 标签          指定标签\n"

#: disk-utils/mkswap.c:192
msgid " -v, --swapversion NUM     specify swap-space version number\n"
msgstr " -v, --swapversion 数字      指定交换空间版本号\n"

#: disk-utils/mkswap.c:193
msgid " -U, --uuid UUID           specify the uuid to use\n"
msgstr " -U, --uuid UUID           指定要使用的 uuid\n"

#: disk-utils/mkswap.c:195
#, c-format
msgid " -e, --endianness=<value>  specify the endianness to use (%s, %s or %s)\n"
msgstr ""

#: disk-utils/mkswap.c:197
msgid "     --verbose             verbose output\n"
msgstr "     --verbose             详尽输出\n"

#: disk-utils/mkswap.c:200 disk-utils/sfdisk.c:2088
#, c-format
msgid "     --lock[=<mode>]       use exclusive device lock (%s, %s or %s)\n"
msgstr "     --lock[=<模式>]       使用独占设备锁（%s、%s 或 %s）\n"

#: disk-utils/mkswap.c:214
#, c-format
msgid "too many bad pages: %lu"
msgstr "坏页过多：%lu"

#: disk-utils/mkswap.c:235
msgid "seek failed in check_blocks"
msgstr "check_blocks (检查块)时定位失败"

#: disk-utils/mkswap.c:245
#, c-format
msgid "%lu bad page\n"
msgid_plural "%lu bad pages\n"
msgstr[0] "%lu 个坏页\n"

#: disk-utils/mkswap.c:257
#, c-format
msgid ""
"mkswap: %s contains holes or other unsupported extents.\n"
"        This swap file can be rejected by kernel on swap activation!\n"
msgstr ""
"mkswap: %s 包含空洞或者其它不支持的扩展。\n"
"        此交换文件可能会在启用时被内核拒绝！\n"

#: disk-utils/mkswap.c:265
#, c-format
msgid "        Use --verbose for more details.\n"
msgstr "        使用 --verbose 显示更多细节。\n"

#: disk-utils/mkswap.c:306 disk-utils/mkswap.c:331
#, c-format
msgid "hole detected at offset %ju"
msgstr "在偏移量 %ju 处探测到空洞"

#: disk-utils/mkswap.c:314
#, c-format
msgid "data inline extent at offset %ju"
msgstr ""

#: disk-utils/mkswap.c:317
#, c-format
msgid "shared extent at offset %ju"
msgstr ""

#: disk-utils/mkswap.c:320
#, c-format
msgid "unallocated extent at offset %ju"
msgstr ""

#: disk-utils/mkswap.c:361
msgid "unable to alloc new libblkid probe"
msgstr "无法分配新的 libblkid 探针"

#: disk-utils/mkswap.c:363
msgid "unable to assign device to libblkid probe"
msgstr "无法将设备分配给 libblkid 探针"

#: disk-utils/mkswap.c:385
#, c-format
msgid "warning: checking bad blocks from swap file is not supported: %s"
msgstr "警告：不支持检查交换区的坏块：%s"

#: disk-utils/mkswap.c:400 disk-utils/mkswap.c:425 disk-utils/mkswap.c:473
msgid "unable to rewind swap-device"
msgstr "无法倒回(rewind)交换设备"

#: disk-utils/mkswap.c:428
msgid "unable to erase bootbits sectors"
msgstr "不能擦除 bootbits 扇区"

#: disk-utils/mkswap.c:445
#, c-format
msgid "%s: warning: wiping old %s signature."
msgstr "%s：警告，将擦除旧的 %s 签名。"

#: disk-utils/mkswap.c:450
#, c-format
msgid "%s: warning: don't erase bootbits sectors"
msgstr "%s：警告，不要擦除 bootbits 扇区"

#: disk-utils/mkswap.c:453
#, c-format
msgid "        (%s partition table detected). "
msgstr "        (检测到 %s 分区表)。"

#: disk-utils/mkswap.c:455
#, c-format
msgid "        (compiled without libblkid). "
msgstr "        (编译时未链接 libblkid)。"

#: disk-utils/mkswap.c:456
#, c-format
msgid "Use -f to force.\n"
msgstr "使用 -f 选项强制执行。\n"

#: disk-utils/mkswap.c:478
#, c-format
msgid "%s: unable to write signature page"
msgstr "%s：无法写签名页"

#: disk-utils/mkswap.c:536
msgid "parsing page size failed"
msgstr "解析页大小失败"

#: disk-utils/mkswap.c:545
msgid "parsing version number failed"
msgstr "解析版本号失败"

#: disk-utils/mkswap.c:548
#, c-format
msgid "swapspace version %d is not supported"
msgstr "不支持 swapspace 版本 %d"

#: disk-utils/mkswap.c:554
#, c-format
msgid "warning: ignoring -U (UUIDs are unsupported by %s)"
msgstr "警告：将忽略 -U 选项(%s 不支持 UUID)"

#: disk-utils/mkswap.c:567
#, fuzzy, c-format
#| msgid "swapspace version %d is not supported"
msgid "invalid endianness %s is not supported"
msgstr "不支持 swapspace 版本 %d"

#: disk-utils/mkswap.c:596
msgid "only one device argument is currently supported"
msgstr "当前只支持一个设备参数"

#: disk-utils/mkswap.c:609
msgid "error: parsing UUID failed"
msgstr "错误：解析 UUID 失败"

#: disk-utils/mkswap.c:618
msgid "error: Nowhere to set up swap on?"
msgstr "错误：没有设置交换空间的地方？"

#: disk-utils/mkswap.c:624
msgid "invalid block count argument"
msgstr "无效的 块计数 参数"

#: disk-utils/mkswap.c:633
#, c-format
msgid "error: size %llu KiB is larger than device size %<PRIu64> KiB"
msgstr "错误：尺寸 %llu KiB 大于设备尺寸 %<PRIu64> KiB"

#: disk-utils/mkswap.c:639
#, c-format
msgid "error: swap area needs to be at least %ld KiB"
msgstr "错误：交换区至少需要 %ld KiB"

#: disk-utils/mkswap.c:645
#, c-format
msgid "warning: truncating swap area to %llu KiB"
msgstr "警告：将把交换区截短为 %llu KiB"

#: disk-utils/mkswap.c:650
#, c-format
msgid "error: %s is mounted; will not make swapspace"
msgstr "错误：%s 已挂载；将不会创建交换空间"

#: disk-utils/mkswap.c:657
#, c-format
msgid "%s: insecure permissions %04o, fix with: chmod %04o %s"
msgstr "%s：不安全的权限 %04o，建议修复方式：chmod %04o %s"

#: disk-utils/mkswap.c:662
#, c-format
msgid "%s: insecure file owner %d, fix with: chown 0:0 %s"
msgstr "%s：不安全的文件拥有者 %d，建议修复方式：chown 0:0 %s"

#: disk-utils/mkswap.c:681
msgid "Unable to set up swap-space: unreadable"
msgstr "无法设置交换空间：不可读"

#: disk-utils/mkswap.c:687
#, c-format
msgid "Setting up swapspace version %d, size = %s (%<PRIu64> bytes)\n"
msgstr "正在设置交换空间版本 %d，大小 = %s (%<PRIu64>  个字节)\n"

#: disk-utils/mkswap.c:707
#, c-format
msgid "%s: unable to obtain selinux file label"
msgstr "%s：无法获得 selinux 文件标签"

#: disk-utils/mkswap.c:712
#, c-format
msgid "%s: unable to obtain default selinux file label"
msgstr "%s：无法获得默认 selinux 文件标签"

#: disk-utils/mkswap.c:716
msgid "unable to create new selinux context"
msgstr "无法创建新的 selinux 环境(context)"

#: disk-utils/mkswap.c:718
msgid "couldn't compute selinux context"
msgstr "无法计算 selinux 环境(context)"

#: disk-utils/mkswap.c:724
#, c-format
msgid "unable to relabel %s to %s"
msgstr "无法将 %s 标签改为 %s"

#: disk-utils/partx.c:86
msgid "partition number"
msgstr "分区号"

#: disk-utils/partx.c:87
msgid "start of the partition in sectors"
msgstr "分区起点(扇区数)"

#: disk-utils/partx.c:88
msgid "end of the partition in sectors"
msgstr "分区终点(扇区数)"

#: disk-utils/partx.c:89
msgid "number of sectors"
msgstr "扇区数"

#: disk-utils/partx.c:90
msgid "human readable size"
msgstr "易读形式的大小"

#: disk-utils/partx.c:91
msgid "partition name"
msgstr "分区名"

#: disk-utils/partx.c:92 misc-utils/findmnt.c:118 misc-utils/lsblk.c:205
msgid "partition UUID"
msgstr "分区 UUID"

#: disk-utils/partx.c:93
msgid "partition table type (dos, gpt, ...)"
msgstr "分区表类型(dos、gpt、...)"

#: disk-utils/partx.c:94 misc-utils/lsblk.c:200
msgid "partition flags"
msgstr "分区标志"

#: disk-utils/partx.c:95
msgid "partition type (a string, a UUID, or hex)"
msgstr "分区类型(字符串，UUID 或十六进制数)"

#: disk-utils/partx.c:114 sys-utils/losetup.c:534 sys-utils/losetup.c:652
msgid "failed to initialize loopcxt"
msgstr "初始化 loopcxt 失败"

#: disk-utils/partx.c:118
#, c-format
msgid "%s: failed to find unused loop device"
msgstr "%s：查找未使用的回环设备失败"

#: disk-utils/partx.c:122
#, c-format
msgid "Trying to use '%s' for the loop device\n"
msgstr "尝试将“%s”用作回环设备\n"

#: disk-utils/partx.c:126
#, c-format
msgid "%s: failed to set backing file"
msgstr "%s：设置后备文件失败"

#: disk-utils/partx.c:131 sys-utils/losetup.c:585
#, c-format
msgid "%s: failed to set up loop device"
msgstr "%s：设置回环设备失败"

#: disk-utils/partx.c:161 login-utils/lslogins.c:322 misc-utils/fincore.c:92
#: misc-utils/findmnt.c:383 misc-utils/lsblk.c:343 misc-utils/lsfd.c:477
#: misc-utils/lslocks.c:351 misc-utils/uuidparse.c:125 misc-utils/wipefs.c:132
#: sys-utils/irq-common.c:103 sys-utils/losetup.c:112 sys-utils/lscpu.c:200
#: sys-utils/lscpu.c:215 sys-utils/lsipc.c:233 sys-utils/lsmem.c:178
#: sys-utils/lsns.c:268 sys-utils/prlimit.c:291 sys-utils/rfkill.c:162
#: sys-utils/swapon.c:150 sys-utils/wdctl.c:179 sys-utils/zramctl.c:147
#, c-format
msgid "unknown column: %s"
msgstr "未知列: %s"

#: disk-utils/partx.c:209
#, c-format
msgid "%s: failed to get partition number"
msgstr "%s：获取分区号失败"

#: disk-utils/partx.c:287 disk-utils/partx.c:325 disk-utils/partx.c:479
#, c-format
msgid "specified range <%d:%d> does not make sense"
msgstr "指定的范围 <%d:%d> 无效"

#: disk-utils/partx.c:291
#, c-format
msgid "range recount: max partno=%d, lower=%d, upper=%d\n"
msgstr "重新计算范围：最大分区号=%d，下限=%d，上限=%d\n"

#: disk-utils/partx.c:298
#, c-format
msgid "%s: error deleting partition %d"
msgstr "%s：删除分区 %d 出错"

#: disk-utils/partx.c:300
#, c-format
msgid "%s: error deleting partitions %d-%d"
msgstr "%s：删除分区 %d-%d 出错"

#: disk-utils/partx.c:333
#, c-format
msgid "%s: partition #%d removed\n"
msgstr "%s：分区 #%d 已移除\n"

#: disk-utils/partx.c:339
#, c-format
msgid "%s: partition #%d doesn't exist\n"
msgstr "%s：分区 #%d 不存在\n"

#: disk-utils/partx.c:344
#, c-format
msgid "%s: deleting partition #%d failed"
msgstr "%s：删除分区 #%d 失败"

#: disk-utils/partx.c:364
#, c-format
msgid "%s: error adding partition %d"
msgstr "%s：添加分区 %d 出错"

#: disk-utils/partx.c:366
#, c-format
msgid "%s: error adding partitions %d-%d"
msgstr "%s：添加分区 %d-%d 出错"

#: disk-utils/partx.c:407 disk-utils/partx.c:515
#, c-format
msgid "%s: partition #%d added\n"
msgstr "%s：分区 #%d 已添加\n"

#: disk-utils/partx.c:412
#, c-format
msgid "%s: adding partition #%d failed"
msgstr "%s：添加分区 #%d 失败"

#: disk-utils/partx.c:447
#, c-format
msgid "%s: error updating partition %d"
msgstr "%s：更新分区 %d 出错"

#: disk-utils/partx.c:449
#, c-format
msgid "%s: error updating partitions %d-%d"
msgstr "%s：更新分区 %d-%d 出错"

#: disk-utils/partx.c:488
#, c-format
msgid "%s: no partition #%d"
msgstr "%s：无分区 #%d"

#: disk-utils/partx.c:509
#, c-format
msgid "%s: partition #%d resized\n"
msgstr "%s：已调整分区 #%d 的大小\n"

#: disk-utils/partx.c:523
#, c-format
msgid "%s: updating partition #%d failed"
msgstr "%s：更新分区 #%d 失败"

#: disk-utils/partx.c:564
#, c-format
msgid "#%2d: %9ju-%9ju (%9ju sector, %6ju MB)\n"
msgid_plural "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
msgstr[0] "#%2d：%9ju-%9ju (%9ju 扇区%6ju MB)\n"

#: disk-utils/partx.c:680 misc-utils/fincore.c:371 misc-utils/findmnt.c:1792
#: misc-utils/lsblk.c:2395 misc-utils/lsfd.c:532 misc-utils/lsfd.c:1984
#: misc-utils/lslocks.c:487 sys-utils/losetup.c:339 sys-utils/lscpu.c:616
#: sys-utils/lscpu.c:772 sys-utils/prlimit.c:320 sys-utils/rfkill.c:487
#: sys-utils/swapon.c:305 sys-utils/wdctl.c:360
msgid "failed to allocate output column"
msgstr "分配输出列失败"

#: disk-utils/partx.c:724
#, c-format
msgid "failed to initialize blkid filter for '%s'"
msgstr "初始化“%s”的 blkid 过滤器失败"

#: disk-utils/partx.c:732
#, c-format
msgid "%s: failed to read partition table"
msgstr "%s：读取分区表失败"

#: disk-utils/partx.c:738
#, c-format
msgid "%s: partition table type '%s' detected\n"
msgstr "%s：检测到分区表类型“%s”\n"

#: disk-utils/partx.c:742
#, c-format
msgid "%s: partition table with no partitions"
msgstr "%s：分区表中无分区"

#: disk-utils/partx.c:755
#, c-format
msgid " %s [-a|-d|-s|-u] [--nr <n:m> | <partition>] <disk>\n"
msgstr " %s [-a|-d|-s|-u] [--nr <n:m> | <分区>] <磁盘>\n"

#: disk-utils/partx.c:759
msgid "Tell the kernel about the presence and numbering of partitions.\n"
msgstr "告知内核分区的存在和排列情况。\n"

#: disk-utils/partx.c:762
msgid " -a, --add            add specified partitions or all of them\n"
msgstr " -a, --add            添加指定的分区或所有分区\n"

#: disk-utils/partx.c:763
msgid " -d, --delete         delete specified partitions or all of them\n"
msgstr " -d, --delete         删除指定的分区或所有分区\n"

#: disk-utils/partx.c:764
msgid " -u, --update         update specified partitions or all of them\n"
msgstr " -u, --update         更新指定的分区或所有分区\n"

#: disk-utils/partx.c:765
msgid ""
" -s, --show           list partitions\n"
"\n"
msgstr ""
" -s, --show           列出分区\n"
"\n"

#: disk-utils/partx.c:766 misc-utils/lsblk.c:2000 sys-utils/lsmem.c:528
msgid " -b, --bytes          print SIZE in bytes rather than in human readable format\n"
msgstr " -b, --bytes          以字节为单位而非易读的格式来打印 SIZE\n"

#: disk-utils/partx.c:767
msgid " -g, --noheadings     don't print headings for --show\n"
msgstr " -g, --noheadings     --show 时不打印标题\n"

#: disk-utils/partx.c:768
msgid " -n, --nr <n:m>       specify the range of partitions (e.g. --nr 2:4)\n"
msgstr " -n, --nr <n:m>       指定分区范围(例如：--nr 2:4)\n"

#: disk-utils/partx.c:769 sys-utils/irqtop.c:271 sys-utils/lsirq.c:66
msgid " -o, --output <list>  define which output columns to use\n"
msgstr " -o, --output <列表>  定义使用哪个输出列\n"

#: disk-utils/partx.c:770 sys-utils/lsmem.c:531
msgid "     --output-all     output all columns\n"
msgstr "     --output-all     输出所有列\n"

#: disk-utils/partx.c:771 misc-utils/lsblk.c:1994 sys-utils/lsirq.c:64
#: sys-utils/lsmem.c:526
msgid " -P, --pairs          use key=\"value\" output format\n"
msgstr " -P, --pairs          使用 key=“value” 输出格式\n"

#: disk-utils/partx.c:772 misc-utils/lsblk.c:2010 sys-utils/lsmem.c:532
msgid " -r, --raw            use raw output format\n"
msgstr " -r, --raw            使用原生输出格式\n"

#: disk-utils/partx.c:773
msgid " -S, --sector-size <num>  overwrite sector size\n"
msgstr " -S, --sector-size <num>  覆盖并指定扇区大小\n"

#: disk-utils/partx.c:774
msgid " -t, --type <type>    specify the partition type\n"
msgstr " -t, --type <类型>    指定分区类型\n"

#: disk-utils/partx.c:775
msgid "     --list-types     list supported partition types and exit\n"
msgstr "     --list-types     列出支持的分区类型并退出\n"

#: disk-utils/partx.c:776 sys-utils/fallocate.c:101
msgid " -v, --verbose        verbose mode\n"
msgstr " -v, --verbose        详尽模式\n"

#: disk-utils/partx.c:861
msgid "failed to parse --nr <M-N> range"
msgstr "解析 --nr <M-N> 范围失败"

#: disk-utils/partx.c:950
msgid "partition and disk name do not match"
msgstr "分区和磁盘名不符"

#: disk-utils/partx.c:979
msgid "--nr and <partition> are mutually exclusive"
msgstr "--nr 和 <分区> 相互排斥"

#: disk-utils/partx.c:998
#, c-format
msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
msgstr "分区：%s，磁盘：%s，从分区：%d,到分区：%d\n"

#: disk-utils/partx.c:1010
#, c-format
msgid "%s: cannot delete partitions"
msgstr "%s：不能删除分区"

#: disk-utils/partx.c:1013
#, c-format
msgid "%s: partitioned loop devices unsupported"
msgstr "%s：不支持已分区的回环设备"

#: disk-utils/partx.c:1031
#, c-format
msgid "%s: failed to initialize blkid prober"
msgstr "%s：初始化 blkid 探针失败"

#: disk-utils/raw.c:50
#, c-format
msgid ""
" %1$s %2$srawN <major> <minor>\n"
" %1$s %2$srawN /dev/<blockdevice>\n"
" %1$s -q %2$srawN\n"
" %1$s -qa\n"
msgstr ""
" %1$s %2$srawN <主设备号> <次设备号>\n"
" %1$s %2$srawN /dev/<块设备>\n"
" %1$s -q %2$srawN\n"
" %1$s -qa\n"

#: disk-utils/raw.c:57
msgid "Bind a raw character device to a block device.\n"
msgstr "将原生字符设备绑定到块设备。\n"

#: disk-utils/raw.c:60
msgid " -q, --query    set query mode\n"
msgstr " -q, --query    设置查询模式\n"

#: disk-utils/raw.c:61
msgid " -a, --all      query all raw devices\n"
msgstr " -a, --all      查询所有 raw 设备\n"

#: disk-utils/raw.c:166
#, c-format
msgid "Device '%s' is the control raw device (use raw<N> where <N> is greater than zero)"
msgstr "设备“%s”是控制原生设备(请使用 raw<N>，其中 <N> 大于 0)"

#: disk-utils/raw.c:183
#, c-format
msgid "Cannot locate block device '%s'"
msgstr "无法定位块设备“%s”"

#: disk-utils/raw.c:186
#, c-format
msgid "Device '%s' is not a block device"
msgstr "设备“%s”不是块设备"

#: disk-utils/raw.c:195 disk-utils/raw.c:198 sys-utils/ipcrm.c:353
#: sys-utils/ipcrm.c:367 sys-utils/ipcrm.c:381
msgid "failed to parse argument"
msgstr "解析参数失败"

#: disk-utils/raw.c:216
#, c-format
msgid "Cannot open master raw device '%s'"
msgstr "无法打开主 Raw 设备“%s”"

#: disk-utils/raw.c:231
#, c-format
msgid "Cannot locate raw device '%s'"
msgstr "无法定位 raw 设备“%s”"

#: disk-utils/raw.c:234
#, c-format
msgid "Raw device '%s' is not a character dev"
msgstr "设备“%s”不是字符设备"

#: disk-utils/raw.c:238
#, c-format
msgid "Device '%s' is not a raw dev"
msgstr "设备“%s”不是 raw 设备"

#: disk-utils/raw.c:248
msgid "Error querying raw device"
msgstr "查询原生(raw)设备失败"

#: disk-utils/raw.c:257 disk-utils/raw.c:272
#, c-format
msgid "%sraw%d:  bound to major %d, minor %d\n"
msgstr "%sraw%d：绑定到主设备号 %d, 次设备号 %d\n"

#: disk-utils/raw.c:271
msgid "Error setting raw device"
msgstr "设置原生(raw)设备出错"

#: disk-utils/resizepart.c:20
#, c-format
msgid " %s <disk device> <partition number> <length>\n"
msgstr " %s <磁盘设备> <分区号> <长度>\n"

#: disk-utils/resizepart.c:24
msgid "Tell the kernel about the new size of a partition.\n"
msgstr "告诉内核分区的新尺寸。\n"

#: disk-utils/resizepart.c:107
#, c-format
msgid "%s: failed to get start of the partition number %s"
msgstr "%s：获取分区号 %s 的起点失败"

#: disk-utils/resizepart.c:112
msgid "failed to resize partition"
msgstr "调整分区大小失败"

#: disk-utils/sfdisk.c:242
msgid "failed to allocate nested libfdisk context"
msgstr "分配嵌套 libfdisk 环境(context)失败"

#: disk-utils/sfdisk.c:302
#, c-format
msgid "cannot seek %s"
msgstr "无法定位 %s"

#: disk-utils/sfdisk.c:313 libfdisk/src/bsd.c:724 libfdisk/src/bsd.c:905
#: schedutils/uclampset.c:119 term-utils/script.c:470
#, c-format
msgid "cannot write %s"
msgstr "无法写 %s"

#: disk-utils/sfdisk.c:320
#, c-format
msgid "%12s (offset %5ju, size %5ju): %s"
msgstr "%12s (偏移  %5ju, 大小 %5ju): %s"

#: disk-utils/sfdisk.c:326
#, c-format
msgid "%s: failed to create a backup"
msgstr "%s：创建备份失败"

#: disk-utils/sfdisk.c:339
msgid "failed to create a backup file, $HOME undefined"
msgstr "创建备份失败，未定义 $HOME"

#: disk-utils/sfdisk.c:365
msgid "Backup files:"
msgstr "备份文件："

#: disk-utils/sfdisk.c:411
msgid "failed to read new partition from device; ignoring --move-data"
msgstr "从设备读取新分区失败；将忽略 --move-data"

#: disk-utils/sfdisk.c:413
msgid "failed to get size of the new partition; ignoring --move-data"
msgstr "获取新分区大小失败，将忽略 --move-data"

#: disk-utils/sfdisk.c:415
msgid "failed to get start of the new partition; ignoring --move-data"
msgstr "获取新分区起点失败，将忽略 --move-data"

#: disk-utils/sfdisk.c:417
msgid "failed to get size of the old partition; ignoring --move-data"
msgstr "获取新分区大小失败，将忽略 --move-data"

#: disk-utils/sfdisk.c:419
msgid "failed to get start of the old partition; ignoring --move-data"
msgstr "获取旧分区起点失败，将忽略 --move-data"

#: disk-utils/sfdisk.c:421
msgid "start of the partition has not been moved; ignoring --move-data"
msgstr "分区起点未移动；将忽略 --move-data"

#: disk-utils/sfdisk.c:423
msgid "new partition is smaller than original; ignoring --move-data"
msgstr "新分区小于原分区；将忽略 --move-data"

#: disk-utils/sfdisk.c:474
msgid "Data move: (--no-act)"
msgstr "数据移动︰（--no-act）"

#: disk-utils/sfdisk.c:474
msgid "Data move:"
msgstr "数据移动︰"

#: disk-utils/sfdisk.c:477
#, c-format
msgid " typescript file: %s"
msgstr "typescript 文件：%s"

#: disk-utils/sfdisk.c:478
#, c-format
msgid "  start sector: (from/to) %ju / %ju\n"
msgstr ""

#: disk-utils/sfdisk.c:479
#, fuzzy, c-format
#| msgid ", %llu sectors\n"
msgid "  sectors: %ju\n"
msgstr "，%llu 个扇区\n"

#: disk-utils/sfdisk.c:480
#, fuzzy, c-format
#| msgid "get size in bytes"
msgid "  step size: %zu bytes\n"
msgstr "获得字节大小"

#: disk-utils/sfdisk.c:490
msgid "Do you want to move partition data?"
msgstr "您想移动分区数据吗？"

#: disk-utils/sfdisk.c:492 disk-utils/sfdisk.c:2014
msgid "Leaving."
msgstr "离开中。"

#: disk-utils/sfdisk.c:554
#, fuzzy, c-format
#| msgid "cannot read at offset: %zu; continue"
msgid "cannot read at offset: %ju; continue"
msgstr "无法在偏移量 %zu 处读取；继续"

#: disk-utils/sfdisk.c:565
#, fuzzy, c-format
#| msgid "cannot write at offset: %zu; continue"
msgid "cannot write at offset: %ju; continue"
msgstr "无法在偏移量 %zu 处写入；继续"

#: disk-utils/sfdisk.c:571
#, fuzzy, c-format
#| msgid "cannot read at offset: %zu; continue"
msgid "cannot fsync at offset: %ju; continue"
msgstr "无法在偏移量 %zu 处读取；继续"

#: disk-utils/sfdisk.c:595
#, c-format
msgid "Moved %ju from %ju sectors (%.3f%%, %.1f MiB/s)."
msgstr ""

#: disk-utils/sfdisk.c:600
#, c-format
msgid "Moved %ju from %ju sectors (%.3f%%)."
msgstr ""

#: disk-utils/sfdisk.c:624
#, c-format
msgid "Moved %ju from %ju sectors (%.0f%%)."
msgstr ""

#: disk-utils/sfdisk.c:637
msgid "Your data has not been moved (--no-act)."
msgstr "您的数据未被移动（--no-act）。"

#: disk-utils/sfdisk.c:639
#, c-format
msgid "%zu I/O errors detected!"
msgstr "检测到 %zu 个 I/O 错误！"

#: disk-utils/sfdisk.c:642
#, c-format
msgid "%s: failed to move data"
msgstr "%s：移动数据失败"

#: disk-utils/sfdisk.c:654
msgid "The partition table is unchanged (--no-act)."
msgstr "分区表未更改(--no-act)。"

#: disk-utils/sfdisk.c:662
msgid ""
"\n"
"The partition table has been altered."
msgstr ""
"\n"
"分区表已调整。"

#: disk-utils/sfdisk.c:737
#, c-format
msgid "unsupported label '%s'"
msgstr "不支持的标签：“%s”"

#: disk-utils/sfdisk.c:740
msgid ""
"Id  Name\n"
"\n"
msgstr ""
"Id 名称\n"
"\n"

#: disk-utils/sfdisk.c:767
msgid "unrecognized partition table type"
msgstr "未识别的分区表类型"

#: disk-utils/sfdisk.c:820
#, c-format
msgid "Cannot get size of %s"
msgstr "无法获得 %s 的大小"

#: disk-utils/sfdisk.c:857
#, c-format
msgid "total: %ju blocks\n"
msgstr "共计：%ju 个块\n"

#: disk-utils/sfdisk.c:916 disk-utils/sfdisk.c:994 disk-utils/sfdisk.c:1031
#: disk-utils/sfdisk.c:1056 disk-utils/sfdisk.c:1090 disk-utils/sfdisk.c:1149
#: disk-utils/sfdisk.c:1217 disk-utils/sfdisk.c:1272 disk-utils/sfdisk.c:1328
#: disk-utils/sfdisk.c:1381 disk-utils/sfdisk.c:1419 disk-utils/sfdisk.c:1755
msgid "no disk device specified"
msgstr "未指定磁盘设备"

#: disk-utils/sfdisk.c:926
msgid "toggle boot flags is unsupported for Hybrid GPT/MBR"
msgstr "混合 GPT/MBR 不支持切换启动（boot）标志"

#: disk-utils/sfdisk.c:931
msgid "cannot switch to PMBR"
msgstr "无法切换至 PMBR"

#: disk-utils/sfdisk.c:932
msgid "Activation is unsupported for GPT -- entering nested PMBR."
msgstr "GPT 不支持激活（Activation）-- 将进入嵌套 PMBR。"

#: disk-utils/sfdisk.c:935
msgid "toggle boot flags is supported for MBR or PMBR only"
msgstr "只支持为 MBR 或 PMBR 切换启动（boot）标志"

#: disk-utils/sfdisk.c:967 disk-utils/sfdisk.c:1010 disk-utils/sfdisk.c:1154
#: disk-utils/sfdisk.c:1222 disk-utils/sfdisk.c:1277 disk-utils/sfdisk.c:1333
#: disk-utils/sfdisk.c:1753 disk-utils/sfdisk.c:2285
msgid "failed to parse partition number"
msgstr "解析分区号失败"

#: disk-utils/sfdisk.c:972
#, c-format
msgid "%s: partition %d: failed to toggle bootable flag"
msgstr "%s：分区 %d：开/关启动标志失败"

#: disk-utils/sfdisk.c:1005 disk-utils/sfdisk.c:1013
#, c-format
msgid "%s: partition %zu: failed to delete"
msgstr "%s：分区 %zu：删除失败"

#: disk-utils/sfdisk.c:1061 disk-utils/sfdisk.c:1095
#, c-format
msgid "%s: does not contain a recognized partition table"
msgstr "%s：不包含可识别的分区表"

#: disk-utils/sfdisk.c:1065
msgid "failed to allocate dump struct"
msgstr "分配转储结构失败"

#: disk-utils/sfdisk.c:1069
#, c-format
msgid "%s: failed to dump partition table"
msgstr "%s：转储分区表失败"

#: disk-utils/sfdisk.c:1127
#, c-format
msgid "%s: no partition table found"
msgstr "%s：找不到分区表"

#: disk-utils/sfdisk.c:1131
#, c-format
msgid "%s: partition %zu: partition table contains only %zu partitions"
msgstr "%s：分区 %zu：分区表中只包含 %zu 个分区"

#: disk-utils/sfdisk.c:1134
#, c-format
msgid "%s: partition %zu: partition is unused"
msgstr "%s: 分区 %zu: 分区未使用"

#: disk-utils/sfdisk.c:1153 disk-utils/sfdisk.c:1221 disk-utils/sfdisk.c:1276
#: disk-utils/sfdisk.c:1332
msgid "no partition number specified"
msgstr "未指定分区号"

#: disk-utils/sfdisk.c:1159 disk-utils/sfdisk.c:1227 disk-utils/sfdisk.c:1282
#: disk-utils/sfdisk.c:1338 disk-utils/sfdisk.c:1387 disk-utils/sfdisk.c:1421
#: sys-utils/losetup.c:784
msgid "unexpected arguments"
msgstr "参数异常"

#: disk-utils/sfdisk.c:1174
#, c-format
msgid "%s: partition %zu: failed to get partition type"
msgstr "%s: 分区 %zu:获取分区类型失败"

#: disk-utils/sfdisk.c:1197
#, c-format
msgid "failed to parse %s partition type '%s'"
msgstr "解析 %s 的分区类型“%s”失败"

#: disk-utils/sfdisk.c:1201
#, c-format
msgid "%s: partition %zu: failed to set partition type"
msgstr "%s: 分区 %zu: 设置分区类型失败"

#: disk-utils/sfdisk.c:1239
#, c-format
msgid "%s: partition %zu: failed to get partition UUID"
msgstr "%s: 分区 %zu: 获取分区 UUID 失败"

#: disk-utils/sfdisk.c:1252 disk-utils/sfdisk.c:1307 disk-utils/sfdisk.c:1361
msgid "failed to allocate partition object"
msgstr "分配分区对象失败"

#: disk-utils/sfdisk.c:1256
#, c-format
msgid "%s: partition %zu: failed to set partition UUID"
msgstr "%s: 分区 %zu: 设置分区 UUID 失败"

#: disk-utils/sfdisk.c:1294
#, c-format
msgid "%s: partition %zu: failed to get partition name"
msgstr "%s: 分区 %zu: 获取分区名失败"

#: disk-utils/sfdisk.c:1311
#, c-format
msgid "%s: partition %zu: failed to set partition name"
msgstr "%s: 分区 %zu: 设置分区名失败"

#: disk-utils/sfdisk.c:1365
#, c-format
msgid "%s: partition %zu: failed to set partition attributes"
msgstr "%s: 分区 %zu: 设置分区属性失败"

#: disk-utils/sfdisk.c:1402
#, c-format
msgid "%s: failed to set disklabel ID"
msgstr "%s：设置磁盘标签 ID 失败"

#: disk-utils/sfdisk.c:1417
#, fuzzy
#| msgid "No --date option specified."
msgid "no relocate operation specified"
msgstr "未指定  --date 选项。"

#: disk-utils/sfdisk.c:1431
#, fuzzy
#| msgid "unsupported option format: %s"
msgid "unsupported relocation operation"
msgstr "不支持的参数格式：%s"

#: disk-utils/sfdisk.c:1476
msgid " Commands:\n"
msgstr " 命令：\n"

#: disk-utils/sfdisk.c:1478
msgid "   write    write table to disk and exit\n"
msgstr "   write    将分区表写入磁盘并退出\n"

#: disk-utils/sfdisk.c:1479
msgid "   quit     show new situation and wait for user's feedback before write\n"
msgstr "   quit     显示新状况并等待用户反馈后再写入\n"

#: disk-utils/sfdisk.c:1480
msgid "   abort    exit sfdisk shell\n"
msgstr "   abort    退出 sfdisk shell\n"

#: disk-utils/sfdisk.c:1481
msgid "   print    display the partition table\n"
msgstr "   print    显示分区表\n"

#: disk-utils/sfdisk.c:1482
msgid "   help     show this help text\n"
msgstr "   help     显示帮助并退出\n"

#: disk-utils/sfdisk.c:1484
msgid "   Ctrl-D   the same as 'quit'\n"
msgstr "   Ctrl-D   同“quit”\n"

#: disk-utils/sfdisk.c:1488
msgid " Input format:\n"
msgstr " 输入格式：\n"

#: disk-utils/sfdisk.c:1490
msgid "   <start>, <size>, <type>, <bootable>\n"
msgstr "   <起点>, <大小>, <类型>, <可启动>\n"

#: disk-utils/sfdisk.c:1493
msgid ""
"   <start>  Beginning of the partition in sectors, or bytes if\n"
"            specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
"            The default is the first free space.\n"
msgstr ""
"   <起点>   分区的起始扇区数或字节数，如果以\n"
"            <数值>{K,M,G,T,P,E,Z,Y} 格式指定。\n"
"            默认为第一处可用空间。\n"

#: disk-utils/sfdisk.c:1498
msgid ""
"   <size>   Size of the partition in sectors, or bytes if\n"
"            specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
"            The default is all available space.\n"
msgstr ""
"   <大小>   分区的大小(扇区或字节数)，如果以\n"
"            <数值>{K,M,G,T,P,E,Z,Y} 格式指定。\n"
"            默认为所有可用空间。\n"

#: disk-utils/sfdisk.c:1503
msgid "   <type>   The partition type.  Default is a Linux data partition.\n"
msgstr "   <类型>   分区类型。默认为 Linux 数据分区。\n"

#: disk-utils/sfdisk.c:1504
msgid "            MBR: hex or L,S,Ex,X,U,R,V shortcuts.\n"
msgstr "            MBR：hex 或 L,S,Ex,X,U,R,V 快捷方式。\n"

#: disk-utils/sfdisk.c:1505
msgid "            GPT: UUID or L,S,H,U,R,V shortcuts.\n"
msgstr "            GPT：UUID 或 L,S,H,U,R,V 快捷方式。\n"

#: disk-utils/sfdisk.c:1508
msgid "   <bootable>  Use '*' to mark an MBR partition as bootable.\n"
msgstr "   <可启动>    使用“*”将 MBR 分区标记为 可启动。\n"

#: disk-utils/sfdisk.c:1512
msgid " Example:\n"
msgstr " 示例：\n"

#: disk-utils/sfdisk.c:1514
msgid "   , 4G     Creates a 4GiB partition at default start offset.\n"
msgstr "   , 4G     在默认起始偏移位置创建一个 4GiB 分区。\n"

#: disk-utils/sfdisk.c:1546 sys-utils/dmesg.c:1674
msgid "unsupported command"
msgstr "不支持的命令"

#: disk-utils/sfdisk.c:1548
#, c-format
msgid "line %d: unsupported command"
msgstr "第 %d 行：不支持的命令"

#: disk-utils/sfdisk.c:1667
#, fuzzy, c-format
#| msgid "Device already contains a %s signature; it will be removed by a write command."
msgid "The device contains '%s' signature and it may be removed by a write command. See sfdisk(8) man page and --wipe option for more details."
msgstr "设备已包含一个 %s 签名；写入命令会将其移除。"

#: disk-utils/sfdisk.c:1674
#, fuzzy, c-format
#| msgid "The old %s signature may remain on the device. It is recommended to wipe the device with wipefs(8) or sfdisk --wipe, in order to avoid possible collisions."
msgid "The device contains '%s' signature and it may remain on the device. It is recommended to wipe the device with wipefs(8) or sfdisk --wipe, in order to avoid possible collisions."
msgstr "旧签名 %s 可能仍然在设备上存留。建议您使用 wipefs(8) 或者 fdisk --wipe 来擦除该设备，以避免潜在的冲突。"

#: disk-utils/sfdisk.c:1722
msgid "failed to allocate partition name"
msgstr "分配分区名失败"

#: disk-utils/sfdisk.c:1761
msgid "failed to allocate script handler"
msgstr "分配脚本处理程序失败"

#: disk-utils/sfdisk.c:1777
#, c-format
msgid "%s: cannot modify partition %d: no partition table was found"
msgstr "%s：无法修改分区 %d：未找到分区表"

#: disk-utils/sfdisk.c:1782
#, c-format
msgid "%s: cannot modify partition %d: partition table contains only %zu partitions"
msgstr "%s: 无法修改分区 %d: 分区表只包含 %zu 个分区"

#: disk-utils/sfdisk.c:1788
#, c-format
msgid "warning: %s: partition %d is not defined yet"
msgstr "警告：%s: 分区 %d 尚未定义"

#: disk-utils/sfdisk.c:1806
#, c-format
msgid ""
"\n"
"Welcome to sfdisk (%s)."
msgstr ""
"\n"
"欢迎使用 sfdisk (%s)。"

#: disk-utils/sfdisk.c:1814
msgid "Checking that no-one is using this disk right now ..."
msgstr "请检查现在是不是有人在使用此磁盘..."

#: disk-utils/sfdisk.c:1817
msgid ""
" FAILED\n"
"\n"
msgstr ""
" 失败\n"
"\n"

#: disk-utils/sfdisk.c:1820
msgid ""
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"Umount all file systems, and swapoff all swap partitions on this disk.\n"
"Use the --no-reread flag to suppress this check.\n"
msgstr ""
"该磁盘目前正在使用 - 不建议您重新分区。\n"
"请卸载此磁盘上所有的文件系统，并关闭(swapoff)上面的交换分区。\n"
"可使用 --no-reread 标志阻止此检查。\n"

#: disk-utils/sfdisk.c:1825
msgid "Use the --force flag to overrule all checks."
msgstr "使用 --force 标志否决所有检查。"

#: disk-utils/sfdisk.c:1827
msgid ""
" OK\n"
"\n"
msgstr ""
" 好的\n"
"\n"

#: disk-utils/sfdisk.c:1836
msgid ""
"\n"
"Old situation:"
msgstr ""
"\n"
"旧状况："

#: disk-utils/sfdisk.c:1849
msgid "failed to set script header"
msgstr "设置脚本标头（header）失败"

#: disk-utils/sfdisk.c:1854
#, c-format
msgid ""
"\n"
"sfdisk is going to create a new '%s' disk label.\n"
"Use 'label: <name>' before you define a first partition\n"
"to override the default."
msgstr ""
"\n"
"sfdisk 即将创建一个新的磁盘标签“%s”。\n"
"在定义第一个分区之前使用“label: <名字>”可覆盖默认值。"

#: disk-utils/sfdisk.c:1857
msgid ""
"\n"
"Type 'help' to get more information.\n"
msgstr ""
"\n"
"请执行“%s --help”了解更多信息。\n"

#: disk-utils/sfdisk.c:1875
msgid "All partitions used."
msgstr "所有分区均已使用。"

#: disk-utils/sfdisk.c:1895
#, c-format
msgid "Unknown script header '%s' -- ignore."
msgstr "未知的脚本标头（header）“%s”——忽略。"

#: disk-utils/sfdisk.c:1911
msgid "Done.\n"
msgstr "完成。\n"

#: disk-utils/sfdisk.c:1923
msgid "Ignoring partition."
msgstr "忽略分区。"

#: disk-utils/sfdisk.c:1934
#, fuzzy
#| msgid "Failed to apply script headers, disk label not created."
msgid "Failed to apply script headers, disk label not created"
msgstr "无法应用脚本标头(header)，未创建磁盘标签。"

#: disk-utils/sfdisk.c:1955
#, c-format
msgid "Failed to add #%zu partition"
msgstr "添加 #%zu 分区失败"

#: disk-utils/sfdisk.c:1978
msgid "Script header accepted."
msgstr "已接受脚本标头(header)。"

#: disk-utils/sfdisk.c:1995
msgid "Failed to apply script headers, disk label not created."
msgstr "无法应用脚本标头(header)，未创建磁盘标签。"

#: disk-utils/sfdisk.c:2002
msgid ""
"\n"
"New situation:"
msgstr ""
"\n"
"新状况："

#: disk-utils/sfdisk.c:2012
msgid "Do you want to write this to disk?"
msgstr "您想写入该磁盘吗？"

#: disk-utils/sfdisk.c:2025
msgid "Leaving.\n"
msgstr "离开中。\n"

#: disk-utils/sfdisk.c:2040
#, c-format
msgid ""
" %1$s [options] <dev> [[-N] <part>]\n"
" %1$s [options] <command>\n"
msgstr ""
" %1$s [选项] <设备> [[-N] <分区>]\n"
" %1$s [选项] <命令>\n"

#: disk-utils/sfdisk.c:2047
msgid " -A, --activate <dev> [<part> ...] list or set bootable (P)MBR partitions\n"
msgstr " -A, --activate <设备> [<分区> ...] 列出或设置可启动的 (P)MBR 分区\n"

#: disk-utils/sfdisk.c:2048
msgid " -d, --dump <dev>                  dump partition table (usable for later input)\n"
msgstr " -d, --dump <设备>                 转储分区表(用于后续输入)\n"

#: disk-utils/sfdisk.c:2049
msgid " -J, --json <dev>                  dump partition table in JSON format\n"
msgstr " -J, --json <设备>                 以 JSON 格式转储分区表\n"

#: disk-utils/sfdisk.c:2050
msgid " -B, --backup-pt-sectors <dev>     binary partition table backup (see -b and -O)\n"
msgstr " -B, --backup-pt-sectors <dev>     二进制分区表备份（参见 -b 和 -O）\n"

#: disk-utils/sfdisk.c:2051
msgid " -g, --show-geometry [<dev> ...]   list geometry of all or specified devices\n"
msgstr " -g, --show-geometry [<设备> ...]  列出所有或指定设备的几何属性\n"

#: disk-utils/sfdisk.c:2052
msgid " -l, --list [<dev> ...]            list partitions of each device\n"
msgstr " -l, --list [<设备> ...]           列出每台设备上的分区\n"

#: disk-utils/sfdisk.c:2053
msgid " -F, --list-free [<dev> ...]       list unpartitioned free areas of each device\n"
msgstr " -F, --list-free [<设备> ...]      列出每台设备上的未分区空间\n"

#: disk-utils/sfdisk.c:2054
msgid " -r, --reorder <dev>               fix partitions order (by start offset)\n"
msgstr " -r, --reorder <设备>              (通过起始偏移量)修复分区顺序\n"

#: disk-utils/sfdisk.c:2055
msgid " -s, --show-size [<dev> ...]       list sizes of all or specified devices\n"
msgstr " -s, --show-size [<设备> ...]       列出所有或指定设备的大小\n"

#: disk-utils/sfdisk.c:2056
msgid " -T, --list-types                  print the recognized types (see -X)\n"
msgstr " -T, --list-types                  打印识别的类型(见 -X)\n"

#: disk-utils/sfdisk.c:2057
msgid " -V, --verify [<dev> ...]          test whether partitions seem correct\n"
msgstr " -V, --verify [<设备> ...]         测试分区是否正确\n"

#: disk-utils/sfdisk.c:2058
msgid "     --delete <dev> [<part> ...]   delete all or specified partitions\n"
msgstr "     --delete <设备> [<分区> ...]  删除所有或指定分区\n"

#: disk-utils/sfdisk.c:2061
msgid " --part-label <dev> <part> [<str>] print or change partition label\n"
msgstr " --part-label <设备> <分区> [<字符串>] 打印或更改分区标签\n"

#: disk-utils/sfdisk.c:2062
msgid " --part-type <dev> <part> [<type>] print or change partition type\n"
msgstr " --part-type <设备> <分区> [<类型>]    打印或更改分区类型\n"

#: disk-utils/sfdisk.c:2063
msgid " --part-uuid <dev> <part> [<uuid>] print or change partition uuid\n"
msgstr " --part-uuid <设备> <分区> [<uuid>]    打印或更改分区 uuid\n"

#: disk-utils/sfdisk.c:2064
msgid " --part-attrs <dev> <part> [<str>] print or change partition attributes\n"
msgstr " --part-attrs <设备> <分区> [<字符串>] 打印或更改分区属性\n"

#: disk-utils/sfdisk.c:2067
msgid " --disk-id <dev> [<str>]           print or change disk label ID (UUID)\n"
msgstr " --disk-id <设备> [<字符串>]       打印或更改磁盘标签 ID（UUID）\n"

#: disk-utils/sfdisk.c:2068
msgid " --relocate <oper> <dev>           move partition header\n"
msgstr " --relocate <oper> <设备>          移动分区头\n"

#: disk-utils/sfdisk.c:2071
msgid " <dev>                     device (usually disk) path\n"
msgstr " <设备>                    设备(通常是磁盘)的路径\n"

#: disk-utils/sfdisk.c:2072
msgid " <part>                    partition number\n"
msgstr " <分区>                   分区号\n"

#: disk-utils/sfdisk.c:2073
msgid " <type>                    partition type, GUID for GPT, hex for MBR\n"
msgstr " <类型>                    分区类型，GUID 对应 GPT，hex 对应 MBR\n"

#: disk-utils/sfdisk.c:2076
msgid " -a, --append              append partitions to existing partition table\n"
msgstr " -a, --append              将分区附加到已有分区表\n"

#: disk-utils/sfdisk.c:2077
msgid " -b, --backup              backup partition table sectors (see -O)\n"
msgstr " -b, --backup              备份分区表扇区(见 -O)\n"

#: disk-utils/sfdisk.c:2078
msgid "     --bytes               print SIZE in bytes rather than in human readable format\n"
msgstr "     -b, --bytes               以字节为单位而非易读的格式来打印 SIZE\n"

#: disk-utils/sfdisk.c:2079
msgid "     --move-data[=<typescript>] move partition data after relocation (requires -N)\n"
msgstr "     --move-data[=<typescript>] 重新定位后移动分区数据(需要 -N)\n"

#: disk-utils/sfdisk.c:2080
msgid "     --move-use-fsync      use fsync after each write when move data\n"
msgstr "     --move-use-fsync      移动数据每次写入后调用 fsync\n"

#: disk-utils/sfdisk.c:2081
msgid " -f, --force               disable all consistency checking\n"
msgstr " -f, --force               禁用所有的一致性检查\n"

#: disk-utils/sfdisk.c:2084
#, c-format
msgid "     --color[=<when>]      colorize output (%s, %s or %s)\n"
msgstr "     --color[=<何时>]     彩色输出（%s, %s 或 %s）\n"

#: disk-utils/sfdisk.c:2089
msgid " -N, --partno <num>        specify partition number\n"
msgstr " -N, --partno <数字>       指定分区号\n"

#: disk-utils/sfdisk.c:2090
msgid " -n, --no-act              do everything except write to device\n"
msgstr " -n, --no-act              不真正执行写入设备\n"

#: disk-utils/sfdisk.c:2091
msgid "     --no-reread           do not check whether the device is in use\n"
msgstr "     --no-reread           不检查设备是否正在使用\n"

#: disk-utils/sfdisk.c:2092
msgid "     --no-tell-kernel      do not tell kernel about changes\n"
msgstr "     --no-tell-kernel      更改而不告诉内核\n"

#: disk-utils/sfdisk.c:2093
msgid " -O, --backup-file <path>  override default backup file name\n"
msgstr " -O, --backup-file <路径>  覆盖默认的备份文件名\n"

#: disk-utils/sfdisk.c:2094
msgid " -o, --output <list>       output columns\n"
msgstr " -o, --output <列表>       输出列\n"

#: disk-utils/sfdisk.c:2095
msgid " -q, --quiet               suppress extra info messages\n"
msgstr " -q, --quiet               禁止输出额外信息\n"

#: disk-utils/sfdisk.c:2097
#, c-format
msgid " -w, --wipe <mode>         wipe signatures (%s, %s or %s)\n"
msgstr " -w, --wipe <模式>         擦除签名（%s, %s 或 %s）\n"

#: disk-utils/sfdisk.c:2100
msgid " -X, --label <name>        specify label type (dos, gpt, ...)\n"
msgstr " -X, --label <名称>        指定标签类型(dos, gpt, ...)\n"

#: disk-utils/sfdisk.c:2101
msgid " -Y, --label-nested <name> specify nested label type (dos, bsd)\n"
msgstr " -Y, --label-nested <名称> 指定嵌套标签类型(dos, bsd)\n"

#: disk-utils/sfdisk.c:2103
msgid " -G, --show-pt-geometry    deprecated, alias to --show-geometry\n"
msgstr " -G, --show-pt-geometry    已废弃，同 --show-geometry\n"

#: disk-utils/sfdisk.c:2104
msgid " -L, --Linux               deprecated, only for backward compatibility\n"
msgstr " -L, --Linux               已废弃，仅为向后兼容\n"

#: disk-utils/sfdisk.c:2105
msgid " -u, --unit S              deprecated, only sector unit is supported\n"
msgstr " -u, --unit S              已废弃，只支持扇区单位\n"

#: disk-utils/sfdisk.c:2239
#, c-format
msgid "%s is deprecated in favour of --part-type"
msgstr "%s 已废弃，请改用 --part-type"

#: disk-utils/sfdisk.c:2244
msgid "--id is deprecated in favour of --part-type"
msgstr "--id 已废弃，请改用 --part-type"

#: disk-utils/sfdisk.c:2260
msgid "--show-pt-geometry is no more implemented. Using --show-geometry."
msgstr "--show-pt-geometry 不再实现。请使用 --show-geometry。"

#: disk-utils/sfdisk.c:2272
msgid "--Linux option is unnecessary and deprecated"
msgstr "--Linux 选项没必要，并且已废弃"

#: disk-utils/sfdisk.c:2301
#, c-format
msgid "unsupported unit '%c'"
msgstr "不支持的单位“%c”"

#: disk-utils/sfdisk.c:2396
msgid "--movedata requires -N"
msgstr "--movedata  需要 -N"

#: disk-utils/swaplabel.c:74
#, c-format
msgid "failed to parse UUID: %s"
msgstr "解析 UUID 失败：%s"

#: disk-utils/swaplabel.c:78
#, c-format
msgid "%s: failed to seek to swap UUID"
msgstr "%s：定位到交换区 UUID 失败"

#: disk-utils/swaplabel.c:82
#, c-format
msgid "%s: failed to write UUID"
msgstr "%s：写 UUID 失败"

#: disk-utils/swaplabel.c:93
#, c-format
msgid "%s: failed to seek to swap label "
msgstr "%s：无法定位到交换区标签 "

#: disk-utils/swaplabel.c:100
#, c-format
msgid "label is too long. Truncating it to '%s'"
msgstr "标签过长。将截短到“%s”"

#: disk-utils/swaplabel.c:103
#, c-format
msgid "%s: failed to write label"
msgstr "%s：写标签失败"

#: disk-utils/swaplabel.c:127
msgid "Display or change the label or UUID of a swap area.\n"
msgstr "显示或更改交换区的标签或 UUID。\n"

#: disk-utils/swaplabel.c:130
msgid ""
" -L, --label <label> specify a new label\n"
" -U, --uuid <uuid>   specify a new uuid\n"
msgstr ""
" -L, --label <标签>  指定一个新标签\n"
" -U, --uuid <uuid>   指定一个新 uuid\n"

#: disk-utils/swaplabel.c:171
msgid "ignore -U (UUIDs are unsupported)"
msgstr "忽略 -U (不支持 UUID)"

#: include/c.h:301
#, c-format
msgid "Try '%s --help' for more information.\n"
msgstr "请尝试执行“%s --help”了解更多信息。\n"

#: include/c.h:446
msgid ""
"\n"
"Usage:\n"
msgstr ""
"\n"
"用法：\n"

#: include/c.h:447
msgid ""
"\n"
"Options:\n"
msgstr ""
"\n"
"选项：\n"

#: include/c.h:448
msgid ""
"\n"
"Functions:\n"
msgstr ""
"\n"
"功能：\n"

#: include/c.h:449
msgid ""
"\n"
"Commands:\n"
msgstr ""
"\n"
"命令：\n"

#: include/c.h:450
msgid ""
"\n"
"Arguments:\n"
msgstr ""
"\n"
"参数：\n"

#: include/c.h:451
msgid ""
"\n"
"Available output columns:\n"
msgstr ""
"\n"
"可用的输出列：\n"

#: include/c.h:454
msgid "display this help"
msgstr "显示此帮助"

#: include/c.h:455
msgid "display version"
msgstr "显示版本"

#: include/c.h:465
#, c-format
msgid ""
" %s arguments may be followed by the suffixes for\n"
"   GiB, TiB, PiB, EiB, ZiB, and YiB (the \"iB\" is optional)\n"
msgstr ""
" %s 参数可能跟随一个后缀，包括\n"
"   GiB、TiB、PiB、EiB、ZiB 和 YiB（其中的“iB”是可选的）\n"

#: include/c.h:468
#, c-format
msgid ""
"\n"
"For more details see %s.\n"
msgstr ""
"\n"
"更多信息请参阅 %s。\n"

#: include/c.h:470
#, c-format
msgid "%s from %s\n"
msgstr "%s，来自 %s\n"

#: include/c.h:492 misc-utils/kill.c:237 term-utils/agetty.c:704
#, fuzzy, c-format
#| msgid "%s from %s\n"
msgid "%s from %s"
msgstr "%s，来自 %s\n"

#: include/c.h:496
msgid "features:"
msgstr ""

#: include/closestream.h:74 include/closestream.h:76 login-utils/vipw.c:272
#: login-utils/vipw.c:291 sys-utils/rtcwake.c:304 term-utils/setterm.c:833
msgid "write error"
msgstr "写出错"

#: include/colors.h:27
msgid "colors are enabled by default"
msgstr "默认启用颜色"

#: include/colors.h:29
msgid "colors are disabled by default"
msgstr "默认禁用颜色"

#: include/env.h:26 lib/pager.c:158 login-utils/login.c:1203
#: login-utils/login.c:1207 term-utils/agetty.c:1241
#, c-format
msgid "failed to set the %s environment variable"
msgstr "设置环境变量 %s 失败"

#: include/optutils.h:89
#, c-format
msgid "%s: mutually exclusive arguments:"
msgstr "%s：互斥参数："

#: include/pt-gpt-partnames.h:15
msgid "EFI System"
msgstr "EFI 系统"

#: include/pt-gpt-partnames.h:17
msgid "MBR partition scheme"
msgstr "MBR 分区方案"

#: include/pt-gpt-partnames.h:18
msgid "Intel Fast Flash"
msgstr "Intel Fast Flash"

#: include/pt-gpt-partnames.h:21
msgid "BIOS boot"
msgstr "BIOS 启动"

#: include/pt-gpt-partnames.h:24
msgid "Sony boot partition"
msgstr "Sony 启动分区"

#: include/pt-gpt-partnames.h:25
msgid "Lenovo boot partition"
msgstr "Lenovo 启动分区"

#: include/pt-gpt-partnames.h:28
msgid "PowerPC PReP boot"
msgstr "PowerPC PReP boot"

#: include/pt-gpt-partnames.h:31
msgid "ONIE boot"
msgstr "ONIE boot"

#: include/pt-gpt-partnames.h:32
msgid "ONIE config"
msgstr "ONIE 配置"

#: include/pt-gpt-partnames.h:35
msgid "Microsoft reserved"
msgstr "Microsoft 保留"

#: include/pt-gpt-partnames.h:36
msgid "Microsoft basic data"
msgstr "Microsoft 基本数据"

#: include/pt-gpt-partnames.h:37
msgid "Microsoft LDM metadata"
msgstr "Microsoft LDM 元数据"

#: include/pt-gpt-partnames.h:38
msgid "Microsoft LDM data"
msgstr "Microsoft LDM 数据"

#: include/pt-gpt-partnames.h:39
msgid "Windows recovery environment"
msgstr "Windows 恢复环境"

#: include/pt-gpt-partnames.h:40
msgid "IBM General Parallel Fs"
msgstr "IBM 通用并行文件系统"

#: include/pt-gpt-partnames.h:41
msgid "Microsoft Storage Spaces"
msgstr "Microsoft 存储空间"

#: include/pt-gpt-partnames.h:44
msgid "HP-UX data"
msgstr "HP-UX 数据"

#: include/pt-gpt-partnames.h:45
msgid "HP-UX service"
msgstr "HP-UX 服务"

#: include/pt-gpt-partnames.h:48 libfdisk/src/sgi.c:60 libfdisk/src/sun.c:51
msgid "Linux swap"
msgstr "Linux swap"

#: include/pt-gpt-partnames.h:49
msgid "Linux filesystem"
msgstr "Linux 文件系统"

#: include/pt-gpt-partnames.h:50
msgid "Linux server data"
msgstr "Linux 保留数据"

#: include/pt-gpt-partnames.h:51
msgid "Linux root (x86)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:52
msgid "Linux root (x86-64)"
msgstr "Linux root (x86-64)"

#: include/pt-gpt-partnames.h:53
msgid "Linux root (Alpha)"
msgstr "Linux root (Alpha)"

#: include/pt-gpt-partnames.h:54
msgid "Linux root (ARC)"
msgstr "Linux root (ARC)"

#: include/pt-gpt-partnames.h:55
msgid "Linux root (ARM)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:56
msgid "Linux root (ARM-64)"
msgstr "Linux root (ARM-64)"

#: include/pt-gpt-partnames.h:57
msgid "Linux root (IA-64)"
msgstr "Linux root (IA-64)"

#: include/pt-gpt-partnames.h:58
msgid "Linux root (LoongArch-64)"
msgstr "Linux root (LoongArch-64)"

#: include/pt-gpt-partnames.h:59
msgid "Linux root (MIPS-32 LE)"
msgstr "Linux root (MIPS-32 LE)"

#: include/pt-gpt-partnames.h:60
msgid "Linux root (MIPS-64 LE)"
msgstr "Linux root (MIPS-64 LE)"

#: include/pt-gpt-partnames.h:61
#, fuzzy
#| msgid "Linux root (ARC)"
msgid "Linux root (HPPA/PARISC)"
msgstr "Linux root (ARC)"

#: include/pt-gpt-partnames.h:62
msgid "Linux root (PPC)"
msgstr "Linux root (PPC)"

#: include/pt-gpt-partnames.h:63
msgid "Linux root (PPC64)"
msgstr "Linux root (PPC64)"

#: include/pt-gpt-partnames.h:64
msgid "Linux root (PPC64LE)"
msgstr "Linux root (PPC64LE)"

#: include/pt-gpt-partnames.h:65
msgid "Linux root (RISC-V-32)"
msgstr "Linux root (RISC-V-32)"

#: include/pt-gpt-partnames.h:66
msgid "Linux root (RISC-V-64)"
msgstr "Linux root (RISC-V-64)"

#: include/pt-gpt-partnames.h:67
msgid "Linux root (S390)"
msgstr "Linux root (S390)"

#: include/pt-gpt-partnames.h:68
msgid "Linux root (S390X)"
msgstr "Linux root (S390X)"

#: include/pt-gpt-partnames.h:69
msgid "Linux root (TILE-Gx)"
msgstr "Linux root (TILE-Gx)"

#: include/pt-gpt-partnames.h:70
msgid "Linux reserved"
msgstr "Linux 保留"

#: include/pt-gpt-partnames.h:71
msgid "Linux home"
msgstr "Linux home"

#: include/pt-gpt-partnames.h:72 libfdisk/src/sgi.c:63
msgid "Linux RAID"
msgstr "Linux RAID"

#: include/pt-gpt-partnames.h:73 include/pt-mbr-partnames.h:65
#: libfdisk/src/sgi.c:62 libfdisk/src/sun.c:53
msgid "Linux LVM"
msgstr "Linux LVM"

#: include/pt-gpt-partnames.h:74
msgid "Linux variable data"
msgstr "Linux 可变数据"

#: include/pt-gpt-partnames.h:75
msgid "Linux temporary data"
msgstr "Linux 临时数据"

#: include/pt-gpt-partnames.h:76
msgid "Linux /usr (x86)"
msgstr "Linux /usr (x86)"

#: include/pt-gpt-partnames.h:77
msgid "Linux /usr (x86-64)"
msgstr "Linux /usr (x86-64)"

#: include/pt-gpt-partnames.h:78
msgid "Linux /usr (Alpha)"
msgstr "Linux /usr (Alpha)"

#: include/pt-gpt-partnames.h:79
msgid "Linux /usr (ARC)"
msgstr "Linux /usr (ARC)"

#: include/pt-gpt-partnames.h:80
msgid "Linux /usr (ARM)"
msgstr "Linux /usr (ARM)"

#: include/pt-gpt-partnames.h:81
msgid "Linux /usr (ARM-64)"
msgstr "Linux /usr (ARM-64)"

#: include/pt-gpt-partnames.h:82
msgid "Linux /usr (IA-64)"
msgstr "Linux /usr (IA-64)"

#: include/pt-gpt-partnames.h:83
msgid "Linux /usr (LoongArch-64)"
msgstr "Linux /usr (LoongArch-64)"

#: include/pt-gpt-partnames.h:84
msgid "Linux /usr (MIPS-32 LE)"
msgstr "Linux /usr (MIPS-32 LE)"

#: include/pt-gpt-partnames.h:85
msgid "Linux /usr (MIPS-64 LE)"
msgstr "Linux /usr (MIPS-64 LE)"

#: include/pt-gpt-partnames.h:86
#, fuzzy
#| msgid "Linux /usr (ARC)"
msgid "Linux /usr (HPPA/PARISC)"
msgstr "Linux /usr (ARC)"

#: include/pt-gpt-partnames.h:87
msgid "Linux /usr (PPC)"
msgstr "Linux /usr (PPC)"

#: include/pt-gpt-partnames.h:88
msgid "Linux /usr (PPC64)"
msgstr "Linux /usr (PPC64)"

#: include/pt-gpt-partnames.h:89
msgid "Linux /usr (PPC64LE)"
msgstr "Linux /usr (PPC64LE)"

#: include/pt-gpt-partnames.h:90
msgid "Linux /usr (RISC-V-32)"
msgstr "Linux /usr (RISC-V-32)"

#: include/pt-gpt-partnames.h:91
msgid "Linux /usr (RISC-V-64)"
msgstr "Linux /usr (RISC-V-64)"

#: include/pt-gpt-partnames.h:92
msgid "Linux /usr (S390)"
msgstr "Linux /usr (S390)"

#: include/pt-gpt-partnames.h:93
msgid "Linux /usr (S390X)"
msgstr "Linux /usr (S390X)"

#: include/pt-gpt-partnames.h:94
msgid "Linux /usr (TILE-Gx)"
msgstr "Linux /usr (TILE-Gx)"

#: include/pt-gpt-partnames.h:95
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity (x86)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:96
#, fuzzy
#| msgid "Linux root (x86-64)"
msgid "Linux root verity (x86-64)"
msgstr "Linux root (x86-64)"

#: include/pt-gpt-partnames.h:97
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity (Alpha)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:98
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity (ARC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:99
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity (ARM)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:100
#, fuzzy
#| msgid "Linux root (ARM-64)"
msgid "Linux root verity (ARM-64)"
msgstr "Linux root (ARM-64)"

#: include/pt-gpt-partnames.h:101
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (IA-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:102
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (LoongArch-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:103
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (MIPS-32 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:104
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (MIPS-64 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:105
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity (HPPA/PARISC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:106
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity (PPC)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:107
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (PPC64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:108
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (PPC64LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:109
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (RISC-V-32)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:110
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (RISC-V-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:111
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity (S390)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:112
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity (S390X)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:113
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity (TILE-Gx)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:114
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity (x86)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:115
#, fuzzy
#| msgid "Linux root (x86-64)"
msgid "Linux /usr verity (x86-64)"
msgstr "Linux root (x86-64)"

#: include/pt-gpt-partnames.h:116
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity (Alpha)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:117
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity (ARC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:118
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity (ARM)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:119
#, fuzzy
#| msgid "Linux root (ARM-64)"
msgid "Linux /usr verity (ARM-64)"
msgstr "Linux root (ARM-64)"

#: include/pt-gpt-partnames.h:120
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (IA-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:121
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (LoongArch-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:122
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (MIPS-32 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:123
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (MIPS-64 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:124
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity (HPPA/PARISC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:125
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity (PPC)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:126
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (PPC64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:127
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (PPC64LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:128
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (RISC-V-32)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:129
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (RISC-V-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:130
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity (S390)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:131
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity (S390X)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:132
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity (TILE-Gx)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:133
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity sign. (x86)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:134
#, fuzzy
#| msgid "Linux root (x86-64)"
msgid "Linux root verity sign. (x86-64)"
msgstr "Linux root (x86-64)"

#: include/pt-gpt-partnames.h:135
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity sign. (Alpha)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:136
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity sign. (ARC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:137
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity sign. (ARM)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:138
#, fuzzy
#| msgid "Linux root (ARM-64)"
msgid "Linux root verity sign. (ARM-64)"
msgstr "Linux root (ARM-64)"

#: include/pt-gpt-partnames.h:139
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (IA-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:140
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (LoongArch-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:141
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (MIPS-32 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:142
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (MIPS-64 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:143
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux root verity sign. (HPPA/PARISC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:144
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity sign. (PPC)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:145
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (PPC64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:146
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (PPC64LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:147
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (RISC-V-32)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:148
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (RISC-V-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:149
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity sign. (S390)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:150
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux root verity sign. (S390X)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:151
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux root verity sign. (TILE-Gx)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:152
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity sign. (x86)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:153
#, fuzzy
#| msgid "Linux root (x86-64)"
msgid "Linux /usr verity sign. (x86-64)"
msgstr "Linux root (x86-64)"

#: include/pt-gpt-partnames.h:154
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity sign. (Alpha)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:155
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity sign. (ARC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:156
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity sign. (ARM)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:157
#, fuzzy
#| msgid "Linux root (ARM-64)"
msgid "Linux /usr verity sign. (ARM-64)"
msgstr "Linux root (ARM-64)"

#: include/pt-gpt-partnames.h:158
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (IA-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:159
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (LoongArch-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:160
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (MIPS-32 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:161
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (MIPS-64 LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:162
#, fuzzy
#| msgid "Linux root (ARM)"
msgid "Linux /usr verity sign. (HPPA/PARISC)"
msgstr "Linux root (ARM)"

#: include/pt-gpt-partnames.h:163
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity sign. (PPC)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:164
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (PPC64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:165
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (PPC64LE)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:166
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (RISC-V-32)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:167
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (RISC-V-64)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:168
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity sign. (S390)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:169
#, fuzzy
#| msgid "Linux root (x86)"
msgid "Linux /usr verity sign. (S390X)"
msgstr "Linux root (x86)"

#: include/pt-gpt-partnames.h:170
#, fuzzy
#| msgid "Linux root\t(IA-64)"
msgid "Linux /usr verity sign. (TILE-Gx)"
msgstr "Linux root\t(IA-64)"

#: include/pt-gpt-partnames.h:176 include/pt-mbr-partnames.h:99
msgid "Linux extended boot"
msgstr "Linux 扩展启动"

#: include/pt-gpt-partnames.h:179
msgid "Linux user's home"
msgstr "Linux 用户家分区"

#: include/pt-gpt-partnames.h:182
msgid "FreeBSD data"
msgstr "FreeBSD 数据"

#: include/pt-gpt-partnames.h:183
msgid "FreeBSD boot"
msgstr "FreeBSD 启动"

#: include/pt-gpt-partnames.h:184
msgid "FreeBSD swap"
msgstr "FreeBSD 交换"

#: include/pt-gpt-partnames.h:185
msgid "FreeBSD UFS"
msgstr "FreeBSD UFS"

#: include/pt-gpt-partnames.h:186
msgid "FreeBSD ZFS"
msgstr "FreeBSD ZFS"

#: include/pt-gpt-partnames.h:187
msgid "FreeBSD Vinum"
msgstr "FreeBSD Vinum"

#: include/pt-gpt-partnames.h:190
msgid "Apple HFS/HFS+"
msgstr "Apple HFS/HFS+"

#: include/pt-gpt-partnames.h:191
msgid "Apple APFS"
msgstr "Apple APFS"

#: include/pt-gpt-partnames.h:192
msgid "Apple UFS"
msgstr "Apple UFS"

#: include/pt-gpt-partnames.h:193
msgid "Apple RAID"
msgstr "Apple RAID"

#: include/pt-gpt-partnames.h:194
msgid "Apple RAID offline"
msgstr "Apple RAID 离线"

#: include/pt-gpt-partnames.h:195
msgid "Apple boot"
msgstr "Apple 启动"

#: include/pt-gpt-partnames.h:196
msgid "Apple label"
msgstr "Apple 标签"

#: include/pt-gpt-partnames.h:197
msgid "Apple TV recovery"
msgstr "Apple TV 恢复"

#: include/pt-gpt-partnames.h:198
msgid "Apple Core storage"
msgstr "Apple Core 存储"

#: include/pt-gpt-partnames.h:199
#, fuzzy
#| msgid "Apple boot"
msgid "Apple Silicon boot"
msgstr "Apple 启动"

#: include/pt-gpt-partnames.h:200
#, fuzzy
#| msgid "Apple TV recovery"
msgid "Apple Silicon recovery"
msgstr "Apple TV 恢复"

#: include/pt-gpt-partnames.h:203 include/pt-mbr-partnames.h:81
msgid "Solaris boot"
msgstr "Solaris 启动"

#: include/pt-gpt-partnames.h:204
msgid "Solaris root"
msgstr "Solaris root"

#: include/pt-gpt-partnames.h:206
msgid "Solaris /usr & Apple ZFS"
msgstr "Solaris /usr & Apple ZFS"

#: include/pt-gpt-partnames.h:207
msgid "Solaris swap"
msgstr "Solaris 交换"

#: include/pt-gpt-partnames.h:208
msgid "Solaris backup"
msgstr "Solaris 备份"

#: include/pt-gpt-partnames.h:209
msgid "Solaris /var"
msgstr "Solaris /var"

#: include/pt-gpt-partnames.h:210
msgid "Solaris /home"
msgstr "Solaris /home"

#: include/pt-gpt-partnames.h:211
msgid "Solaris alternate sector"
msgstr "Solaris 备选扇区"

#: include/pt-gpt-partnames.h:212
msgid "Solaris reserved 1"
msgstr "Solaris 保留 1"

#: include/pt-gpt-partnames.h:213
msgid "Solaris reserved 2"
msgstr "Solaris 保留 2"

#: include/pt-gpt-partnames.h:214
msgid "Solaris reserved 3"
msgstr "Solaris 保留 3"

#: include/pt-gpt-partnames.h:215
msgid "Solaris reserved 4"
msgstr "Solaris 保留 4"

#: include/pt-gpt-partnames.h:216
msgid "Solaris reserved 5"
msgstr "Solaris 保留 5"

#: include/pt-gpt-partnames.h:224
msgid "NetBSD swap"
msgstr "NetBSD 交换"

#: include/pt-gpt-partnames.h:225
msgid "NetBSD FFS"
msgstr "NetBSD FFS"

#: include/pt-gpt-partnames.h:226
msgid "NetBSD LFS"
msgstr "NetBSD LFS"

#: include/pt-gpt-partnames.h:227
msgid "NetBSD concatenated"
msgstr "NetBSD concatenated"

#: include/pt-gpt-partnames.h:228
msgid "NetBSD encrypted"
msgstr "NetBSD 加密"

#: include/pt-gpt-partnames.h:229
msgid "NetBSD RAID"
msgstr "NetBSD RAID"

#: include/pt-gpt-partnames.h:232
msgid "ChromeOS kernel"
msgstr "ChromeOS 内核"

#: include/pt-gpt-partnames.h:233
msgid "ChromeOS root fs"
msgstr "ChromeOS 根文件系统"

#: include/pt-gpt-partnames.h:234
msgid "ChromeOS reserved"
msgstr "ChromeOS 保留"

#: include/pt-gpt-partnames.h:237
msgid "MidnightBSD data"
msgstr "MidnightBSD 数据"

#: include/pt-gpt-partnames.h:238
msgid "MidnightBSD boot"
msgstr "MidnightBSD 启动"

#: include/pt-gpt-partnames.h:239
msgid "MidnightBSD swap"
msgstr "MidnightBSD 交换"

#: include/pt-gpt-partnames.h:240
msgid "MidnightBSD UFS"
msgstr "MidnightBSD UFS"

#: include/pt-gpt-partnames.h:241
msgid "MidnightBSD ZFS"
msgstr "MidnightBSD ZFS"

#: include/pt-gpt-partnames.h:242
msgid "MidnightBSD Vinum"
msgstr "MidnightBSD Vinum"

#: include/pt-gpt-partnames.h:245
msgid "Ceph Journal"
msgstr "Ceph 日志"

#: include/pt-gpt-partnames.h:246
msgid "Ceph Encrypted Journal"
msgstr "Ceph 加密日志"

#: include/pt-gpt-partnames.h:247
msgid "Ceph OSD"
msgstr "Ceph OSD"

#: include/pt-gpt-partnames.h:248
msgid "Ceph crypt OSD"
msgstr "Ceph 加密 OSD"

#: include/pt-gpt-partnames.h:249
msgid "Ceph disk in creation"
msgstr "创建中的 Ceph 磁盘"

#: include/pt-gpt-partnames.h:250
msgid "Ceph crypt disk in creation"
msgstr "创建中的加密 Ceph 磁盘"

#: include/pt-gpt-partnames.h:253 include/pt-mbr-partnames.h:109
msgid "VMware VMFS"
msgstr "VMware VMFS"

#: include/pt-gpt-partnames.h:254
msgid "VMware Diagnostic"
msgstr "VMware 诊断"

#: include/pt-gpt-partnames.h:255
msgid "VMware Virtual SAN"
msgstr "VMware Virtual SAN"

#: include/pt-gpt-partnames.h:256
msgid "VMware Virsto"
msgstr "VMware Virsto"

#: include/pt-gpt-partnames.h:257
msgid "VMware Reserved"
msgstr "VMware 保留"

#: include/pt-gpt-partnames.h:260
msgid "OpenBSD data"
msgstr "OpenBSD 数据"

#: include/pt-gpt-partnames.h:263
msgid "QNX6 file system"
msgstr "QNX6 文件系统"

#: include/pt-gpt-partnames.h:266
msgid "Plan 9 partition"
msgstr "Plan 9 分区"

#: include/pt-gpt-partnames.h:269
msgid "HiFive FSBL"
msgstr "HiFive FSBL"

#: include/pt-gpt-partnames.h:270
msgid "HiFive BBL"
msgstr "HiFive BBL"

#: include/pt-gpt-partnames.h:273
msgid "Haiku BFS"
msgstr "Haiku BFS"

#: include/pt-gpt-partnames.h:276
msgid "Marvell Armada 3700 Boot partition"
msgstr ""

#: include/pt-mbr-partnames.h:5
msgid "Empty"
msgstr "空"

#: include/pt-mbr-partnames.h:6
msgid "FAT12"
msgstr "FAT12"

#: include/pt-mbr-partnames.h:7
msgid "XENIX root"
msgstr "XENIX root"

#: include/pt-mbr-partnames.h:8
msgid "XENIX usr"
msgstr "XENIX usr"

#: include/pt-mbr-partnames.h:9
msgid "FAT16 <32M"
msgstr "FAT16 <32M"

#: include/pt-mbr-partnames.h:10
msgid "Extended"
msgstr "扩展"

#: include/pt-mbr-partnames.h:11
msgid "FAT16"
msgstr "FAT16"

#: include/pt-mbr-partnames.h:12
msgid "HPFS/NTFS/exFAT"
msgstr "HPFS/NTFS/exFAT"

#: include/pt-mbr-partnames.h:13
msgid "AIX"
msgstr "AIX"

#: include/pt-mbr-partnames.h:14
msgid "AIX bootable"
msgstr "AIX 可启动"

#: include/pt-mbr-partnames.h:15
msgid "OS/2 Boot Manager"
msgstr "OS/2 启动管理器"

#: include/pt-mbr-partnames.h:16
msgid "W95 FAT32"
msgstr "W95 FAT32"

#: include/pt-mbr-partnames.h:17
msgid "W95 FAT32 (LBA)"
msgstr "W95 FAT32 (LBA)"

#: include/pt-mbr-partnames.h:18
msgid "W95 FAT16 (LBA)"
msgstr "W95 FAT16 (LBA)"

#: include/pt-mbr-partnames.h:19
msgid "W95 Ext'd (LBA)"
msgstr "W95 扩展 (LBA)"

#: include/pt-mbr-partnames.h:20
msgid "OPUS"
msgstr "OPUS"

#: include/pt-mbr-partnames.h:21
msgid "Hidden FAT12"
msgstr "隐藏的 FAT12"

#: include/pt-mbr-partnames.h:22
msgid "Compaq diagnostics"
msgstr "Compaq 诊断"

#: include/pt-mbr-partnames.h:23
msgid "Hidden FAT16 <32M"
msgstr "隐藏的 FAT16 <32M"

#: include/pt-mbr-partnames.h:24
msgid "Hidden FAT16"
msgstr "隐藏的 FAT16"

#: include/pt-mbr-partnames.h:25
msgid "Hidden HPFS/NTFS"
msgstr "隐藏的 HPFS/NTFS"

#: include/pt-mbr-partnames.h:26
msgid "AST SmartSleep"
msgstr "AST 智能睡眠"

#: include/pt-mbr-partnames.h:27
msgid "Hidden W95 FAT32"
msgstr "隐藏的 W95 FAT32"

#: include/pt-mbr-partnames.h:28
msgid "Hidden W95 FAT32 (LBA)"
msgstr "隐藏的 W95 FAT32 (LBA)"

#: include/pt-mbr-partnames.h:29
msgid "Hidden W95 FAT16 (LBA)"
msgstr "隐藏的 W95 FAT16 (LBA)"

#: include/pt-mbr-partnames.h:30
msgid "NEC DOS"
msgstr "NEC DOS"

#: include/pt-mbr-partnames.h:31
msgid "Hidden NTFS WinRE"
msgstr "隐藏的 NTFS WinRE"

#: include/pt-mbr-partnames.h:32
msgid "Plan 9"
msgstr "Plan 9"

#: include/pt-mbr-partnames.h:33
msgid "PartitionMagic recovery"
msgstr "PartitionMagic 恢复"

#: include/pt-mbr-partnames.h:34
msgid "Venix 80286"
msgstr "Venix 80286"

#: include/pt-mbr-partnames.h:35
msgid "PPC PReP Boot"
msgstr "PPC PReP Boot"

#: include/pt-mbr-partnames.h:36
msgid "SFS"
msgstr "SFS"

#: include/pt-mbr-partnames.h:37
msgid "QNX4.x"
msgstr "QNX4.x"

#: include/pt-mbr-partnames.h:38
msgid "QNX4.x 2nd part"
msgstr "QNX4.x 第2部分"

#: include/pt-mbr-partnames.h:39
msgid "QNX4.x 3rd part"
msgstr "QNX4.x 第3部分"

#: include/pt-mbr-partnames.h:40
msgid "OnTrack DM"
msgstr "OnTrack DM"

#: include/pt-mbr-partnames.h:41
msgid "OnTrack DM6 Aux1"
msgstr "OnTrack DM6 Aux1"

#: include/pt-mbr-partnames.h:42
msgid "CP/M"
msgstr "CP/M"

#: include/pt-mbr-partnames.h:43
msgid "OnTrack DM6 Aux3"
msgstr "OnTrack DM6 Aux3"

#: include/pt-mbr-partnames.h:44
msgid "OnTrackDM6"
msgstr "OnTrackDM6"

#: include/pt-mbr-partnames.h:45
msgid "EZ-Drive"
msgstr "EZ-Drive"

#: include/pt-mbr-partnames.h:46
msgid "Golden Bow"
msgstr "Golden Bow"

#: include/pt-mbr-partnames.h:47
msgid "Priam Edisk"
msgstr "Priam Edisk"

#: include/pt-mbr-partnames.h:48 include/pt-mbr-partnames.h:95
#: include/pt-mbr-partnames.h:105 include/pt-mbr-partnames.h:106
msgid "SpeedStor"
msgstr "SpeedStor"

#: include/pt-mbr-partnames.h:49
msgid "GNU HURD or SysV"
msgstr "GNU HURD 或 SysV"

#: include/pt-mbr-partnames.h:50
msgid "Novell Netware 286"
msgstr "Novell Netware 286"

#: include/pt-mbr-partnames.h:51
msgid "Novell Netware 386"
msgstr "Novell Netware 386"

#: include/pt-mbr-partnames.h:52
msgid "DiskSecure Multi-Boot"
msgstr "DiskSecure 多启动"

#: include/pt-mbr-partnames.h:53
msgid "PC/IX"
msgstr "PC/IX"

#: include/pt-mbr-partnames.h:54
msgid "Old Minix"
msgstr "旧 Minix"

#: include/pt-mbr-partnames.h:55
msgid "Minix / old Linux"
msgstr "Minix / 旧 Linux"

#: include/pt-mbr-partnames.h:56
msgid "Linux swap / Solaris"
msgstr "Linux swap / Solaris"

#: include/pt-mbr-partnames.h:57
msgid "Linux"
msgstr "Linux"

#: include/pt-mbr-partnames.h:58
msgid "OS/2 hidden or Intel hibernation"
msgstr "OS/2 隐藏 或 Intel 休眠"

#: include/pt-mbr-partnames.h:61
msgid "Linux extended"
msgstr "Linux 扩展"

#: include/pt-mbr-partnames.h:62 include/pt-mbr-partnames.h:63
msgid "NTFS volume set"
msgstr "NTFS 卷集"

#: include/pt-mbr-partnames.h:64
msgid "Linux plaintext"
msgstr "Linux 纯文本"

#: include/pt-mbr-partnames.h:66
msgid "Amoeba"
msgstr "Amoeba"

#: include/pt-mbr-partnames.h:67
msgid "Amoeba BBT"
msgstr "Amoeba BBT"

#: include/pt-mbr-partnames.h:68
msgid "BSD/OS"
msgstr "BSD/OS"

#: include/pt-mbr-partnames.h:69
msgid "IBM Thinkpad hibernation"
msgstr "IBM Thinkpad 休眠"

#: include/pt-mbr-partnames.h:70
msgid "FreeBSD"
msgstr "FreeBSD"

#: include/pt-mbr-partnames.h:71
msgid "OpenBSD"
msgstr "OpenBSD"

#: include/pt-mbr-partnames.h:72
msgid "NeXTSTEP"
msgstr "NeXTSTEP"

#: include/pt-mbr-partnames.h:73
msgid "Darwin UFS"
msgstr "Darwin UFS"

#: include/pt-mbr-partnames.h:74
msgid "NetBSD"
msgstr "NetBSD"

#: include/pt-mbr-partnames.h:75
msgid "Darwin boot"
msgstr "Darwin 启动"

#: include/pt-mbr-partnames.h:76
msgid "HFS / HFS+"
msgstr "HFS / HFS+"

#: include/pt-mbr-partnames.h:77
msgid "BSDI fs"
msgstr "BSDI fs"

#: include/pt-mbr-partnames.h:78
msgid "BSDI swap"
msgstr "BSDI swap"

#: include/pt-mbr-partnames.h:79
msgid "Boot Wizard hidden"
msgstr "Boot Wizard 隐藏"

#: include/pt-mbr-partnames.h:80
msgid "Acronis FAT32 LBA"
msgstr "Acronis FAT32 LBA"

#: include/pt-mbr-partnames.h:82
msgid "Solaris"
msgstr "Solaris"

#: include/pt-mbr-partnames.h:83
msgid "DRDOS/sec (FAT-12)"
msgstr "DRDOS/sec (FAT-12)"

#: include/pt-mbr-partnames.h:84
msgid "DRDOS/sec (FAT-16 < 32M)"
msgstr "DRDOS/sec (FAT-16 < 32M)"

#: include/pt-mbr-partnames.h:85
msgid "DRDOS/sec (FAT-16)"
msgstr "DRDOS/sec (FAT-16)"

#: include/pt-mbr-partnames.h:86
msgid "Syrinx"
msgstr "Syrinx"

#: include/pt-mbr-partnames.h:87
msgid "Non-FS data"
msgstr "非文件系统数据"

#: include/pt-mbr-partnames.h:88
msgid "CP/M / CTOS / ..."
msgstr "CP/M / CTOS / ..."

#: include/pt-mbr-partnames.h:90
msgid "Dell Utility"
msgstr "Dell 工具"

#: include/pt-mbr-partnames.h:91
msgid "BootIt"
msgstr "BootIt"

#: include/pt-mbr-partnames.h:92
msgid "DOS access"
msgstr "DOS 访问"

#: include/pt-mbr-partnames.h:94
msgid "DOS R/O"
msgstr "DOS R/O"

#: include/pt-mbr-partnames.h:101
msgid "BeOS fs"
msgstr "BeOS fs"

#: include/pt-mbr-partnames.h:103
msgid "EFI (FAT-12/16/32)"
msgstr "EFI (FAT-12/16/32)"

#: include/pt-mbr-partnames.h:104
msgid "Linux/PA-RISC boot"
msgstr "Linux/PA-RISC 启动"

#: include/pt-mbr-partnames.h:107
msgid "DOS secondary"
msgstr "DOS 次要"

#: include/pt-mbr-partnames.h:108
msgid "EBBR protective"
msgstr ""

#: include/pt-mbr-partnames.h:110
msgid "VMware VMKCORE"
msgstr "VMware VMKCORE"

#: include/pt-mbr-partnames.h:111 libfdisk/src/sun.c:54
msgid "Linux raid autodetect"
msgstr "Linux raid 自动检测"

#: include/pt-mbr-partnames.h:114
msgid "LANstep"
msgstr "LANstep"

#: include/pt-mbr-partnames.h:115
msgid "BBT"
msgstr "BBT"

#: lib/blkdev.c:286
#, c-format
msgid "warning: %s is misaligned"
msgstr "警告：%s 未正确对齐"

#: lib/blkdev.c:398
#, c-format
msgid "unsupported lock mode: %s"
msgstr "不支持的锁模式：%s"

#: lib/blkdev.c:408
#, c-format
msgid "%s: %s: device already locked, waiting to get lock ... "
msgstr "%s：%s：设备已锁定，等待获取锁……"

#: lib/blkdev.c:417
#, c-format
msgid "%s: device already locked"
msgstr "%s：设备已锁定"

#: lib/blkdev.c:420
#, c-format
msgid "%s: failed to get lock"
msgstr "%s：获取锁失败"

#: lib/blkdev.c:423
#, c-format
msgid "OK\n"
msgstr "正常\n"

#: libfdisk/src/ask.c:509 libfdisk/src/ask.c:521
#, c-format
msgid "Selected partition %ju"
msgstr "已选择分区 %ju"

#: libfdisk/src/ask.c:512
msgid "No partition is defined yet!"
msgstr "还没有定义分区！"

#: libfdisk/src/ask.c:524
msgid "No free partition available!"
msgstr "无空闲分区可用！"

#: libfdisk/src/ask.c:534
msgid "Partition number"
msgstr "分区号"

#: libfdisk/src/ask.c:1031
#, c-format
msgid "Created a new partition %d of type '%s' and of size %s."
msgstr "创建了一个新分区 %d，类型为“%s”，大小为 %s。"

#: libfdisk/src/bsd.c:165
#, c-format
msgid "Partition %zd: has invalid starting sector 0."
msgstr "分区 %zd：无效的起始扇区 0。"

#: libfdisk/src/bsd.c:180
#, c-format
msgid "There is no *BSD partition on %s."
msgstr "%s 上没有 *BSD 分区。"

#: libfdisk/src/bsd.c:258 libfdisk/src/dos.c:1050
msgid "First cylinder"
msgstr "第一个柱面"

#: libfdisk/src/bsd.c:291 libfdisk/src/dos.c:1436
msgid "Last cylinder, +/-cylinders or +/-size{K,M,G,T,P}"
msgstr "最后一个柱面, +/-cylinders 或 +size{K,M,G,T,P}"

#: libfdisk/src/bsd.c:296 libfdisk/src/dos.c:1441 libfdisk/src/gpt.c:2551
msgid "Last sector, +/-sectors or +/-size{K,M,G,T,P}"
msgstr "最后一个扇区，+/-sectors 或 +size{K,M,G,T,P}"

#: libfdisk/src/bsd.c:381
#, c-format
msgid "The device %s does not contain BSD disklabel."
msgstr "设备 %s 不包含 BSD 磁盘标签。"

#: libfdisk/src/bsd.c:383
msgid "Do you want to create a BSD disklabel?"
msgstr "您想创建一个 BSD 磁盘标签吗？"

#: libfdisk/src/bsd.c:449
msgid "Disk"
msgstr "磁盘"

#: libfdisk/src/bsd.c:456
msgid "Packname"
msgstr "包名"

#: libfdisk/src/bsd.c:463 libfdisk/src/sun.c:1137
msgid "Flags"
msgstr "标志"

#: libfdisk/src/bsd.c:466
msgid " removable"
msgstr " 可移动"

#: libfdisk/src/bsd.c:467
msgid " ecc"
msgstr " ecc"

#: libfdisk/src/bsd.c:468
msgid " badsect"
msgstr " 坏扇区"

#: libfdisk/src/bsd.c:476
msgid "Bytes/Sector"
msgstr "字节/扇区"

#: libfdisk/src/bsd.c:481
msgid "Tracks/Cylinder"
msgstr "磁道/柱面"

#: libfdisk/src/bsd.c:486
msgid "Sectors/Cylinder"
msgstr "扇区/柱面"

#: libfdisk/src/bsd.c:491 libfdisk/src/bsd.c:1029 libfdisk/src/dos.c:2806
#: libfdisk/src/sgi.c:1162 libfdisk/src/sun.c:203 libfdisk/src/sun.c:1133
msgid "Cylinders"
msgstr "柱面"

#: libfdisk/src/bsd.c:496 libfdisk/src/sun.c:783
msgid "Rpm"
msgstr "转每分"

#: libfdisk/src/bsd.c:501 libfdisk/src/sgi.c:291 libfdisk/src/sun.c:803
msgid "Interleave"
msgstr "交错"

#: libfdisk/src/bsd.c:506
msgid "Trackskew"
msgstr "磁道螺距"

#: libfdisk/src/bsd.c:511
msgid "Cylinderskew"
msgstr "柱头螺距"

#: libfdisk/src/bsd.c:516
msgid "Headswitch"
msgstr "磁头切换"

#: libfdisk/src/bsd.c:521
msgid "Track-to-track seek"
msgstr "跨磁道定位"

#: libfdisk/src/bsd.c:611
msgid "bytes/sector"
msgstr "字节/扇区"

#: libfdisk/src/bsd.c:614
msgid "sectors/track"
msgstr "扇区/磁道"

#: libfdisk/src/bsd.c:615
msgid "tracks/cylinder"
msgstr "磁道/柱面"

#: libfdisk/src/bsd.c:616
msgid "cylinders"
msgstr "柱面"

#: libfdisk/src/bsd.c:621
msgid "sectors/cylinder"
msgstr "扇区/柱面"

#: libfdisk/src/bsd.c:624
msgid "rpm"
msgstr "rpm"

#: libfdisk/src/bsd.c:625
msgid "interleave"
msgstr "交错"

#: libfdisk/src/bsd.c:626
msgid "trackskew"
msgstr "磁道螺距"

#: libfdisk/src/bsd.c:627
msgid "cylinderskew"
msgstr "柱头螺距"

#: libfdisk/src/bsd.c:629
msgid "headswitch"
msgstr "磁头切换"

#: libfdisk/src/bsd.c:630
msgid "track-to-track seek"
msgstr "跨磁道定位"

#: libfdisk/src/bsd.c:652
#, c-format
msgid "The bootstrap file %s successfully loaded."
msgstr "成功加载了引导程序文件 %s。"

#: libfdisk/src/bsd.c:674
#, c-format
msgid "Bootstrap: %1$sboot -> boot%1$s (default %1$s)"
msgstr "引导：%1$sboot -> boot%1$s (默认 %1$s)"

#: libfdisk/src/bsd.c:705
msgid "Bootstrap overlaps with disklabel!"
msgstr "引导程序与磁盘标签重叠！"

#: libfdisk/src/bsd.c:729
#, c-format
msgid "Bootstrap installed on %s."
msgstr "已在 %s 上安装引导程序。"

#: libfdisk/src/bsd.c:911
#, c-format
msgid "Disklabel written to %s.  (Don't forget to write the %s disklabel too.)"
msgstr "磁盘标签已写入 %s。(不要忘了也写入 %s 磁盘标签。)"

#: libfdisk/src/bsd.c:914
#, c-format
msgid "Disklabel written to %s."
msgstr "磁盘标签已写入 %s。"

#: libfdisk/src/bsd.c:920 libfdisk/src/context.c:776
msgid "Syncing disks."
msgstr "正在同步磁盘。"

#: libfdisk/src/bsd.c:961
msgid "BSD label is not nested within a DOS partition."
msgstr "BSD 标签未嵌套在 DOS 分区中。"

#: libfdisk/src/bsd.c:989
#, c-format
msgid "BSD partition '%c' linked to DOS partition %zu."
msgstr "BSD 分区“%c”已链接到 DOS 分区 %zu。"

#: libfdisk/src/bsd.c:1025
msgid "Slice"
msgstr "片"

#: libfdisk/src/bsd.c:1032
msgid "Fsize"
msgstr "Fsize"

#: libfdisk/src/bsd.c:1033
msgid "Bsize"
msgstr "Bsize"

#: libfdisk/src/bsd.c:1034
msgid "Cpg"
msgstr "Cpg"

#: libfdisk/src/context.c:766
#, c-format
msgid "%s: fsync device failed"
msgstr "%s：设备 fsync 失败"

#: libfdisk/src/context.c:771 misc-utils/wipefs.c:619
#, c-format
msgid "%s: close device failed"
msgstr "%s：关闭设备失败"

#: libfdisk/src/context.c:854
msgid "Calling ioctl() to re-read partition table."
msgstr "将调用 ioctl() 来重新读分区表。"

#: libfdisk/src/context.c:862
msgid "Re-reading the partition table failed."
msgstr "重新读取分区表失败。"

#: libfdisk/src/context.c:864
msgid "The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or partx(8)."
msgstr "内核仍在使用旧分区表。新分区表将在下次重启或运行 partprobe(8) 或 partx(8) 后生效。"

#: libfdisk/src/context.c:954
#, c-format
msgid "Failed to remove partition %zu from system"
msgstr "从系统上移除分区 %zu 时失败"

#: libfdisk/src/context.c:963
#, c-format
msgid "Failed to update system information about partition %zu"
msgstr "更新系统中有关分区 %zu 的信息时失败"

#: libfdisk/src/context.c:983
#, c-format
msgid "Failed to add partition %zu to system"
msgstr "添加分区 %zu 至系统时失败"

#: libfdisk/src/context.c:989
msgid "The kernel still uses the old partitions. The new table will be used at the next reboot. "
msgstr "内核仍在使用旧分区。新分区表将在下次重启后生效。"

#: libfdisk/src/context.c:1193
msgid "cylinder"
msgid_plural "cylinders"
msgstr[0] "柱面"

#: libfdisk/src/context.c:1194
msgid "sector"
msgid_plural "sectors"
msgstr[0] "扇区"

#: libfdisk/src/context.c:1550
msgid "Incomplete geometry setting."
msgstr "不完整的几何属性设置。"

#: libfdisk/src/dos.c:217
msgid "All primary partitions have been defined already."
msgstr "已经定义了所有主分区。"

#: libfdisk/src/dos.c:220
msgid "Primary partition not available."
msgstr "主分区不可用。"

#: libfdisk/src/dos.c:274
#, c-format
msgid "Failed to read extended partition table (offset=%ju)"
msgstr "读取扩展分区表失败(偏移=%ju)"

#: libfdisk/src/dos.c:344
msgid "You can set geometry from the extra functions menu."
msgstr "您可以从 更多功能 菜单获取几何属性。"

#: libfdisk/src/dos.c:347
msgid "DOS-compatible mode is deprecated."
msgstr "DOS 兼容模式已废弃。"

#: libfdisk/src/dos.c:351
msgid "The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted."
msgstr "设备上存在一个小于物理扇区尺寸的逻辑扇区尺寸。建议您对齐到物理扇区(或最佳 I/O)尺寸边界，否则性能可能受影响。"

#: libfdisk/src/dos.c:357
msgid "Cylinders as display units are deprecated."
msgstr "以柱面为显示单位的方式已废弃。"

#: libfdisk/src/dos.c:364
#, c-format
msgid "The size of this disk is %s (%ju bytes). DOS partition table format cannot be used on drives for volumes larger than %lu bytes for %lu-byte sectors. Use GUID partition table format (GPT)."
msgstr "该磁盘的大小为 %s （%ju 字节）。DOS 分区表不能用于卷容量大于 %lu 字节、%lu 字节扇区的驱动器。请使用 GUID 分区表格式（GPT）。"

#: libfdisk/src/dos.c:540
msgid "Bad offset in primary extended partition."
msgstr "主扩展分区中的偏移错误。"

#: libfdisk/src/dos.c:554
#, c-format
msgid "Omitting partitions after #%zu. They will be deleted if you save this partition table."
msgstr "警告：将忽略 #%zu 后的扇区。如果您保存此分区表，它们会被删除。"

#: libfdisk/src/dos.c:587
#, c-format
msgid "Extra link pointer in partition table %zu."
msgstr "在分区表 %zu 中有额外链接指针。"

#: libfdisk/src/dos.c:595
#, c-format
msgid "Ignoring extra data in partition table %zu."
msgstr "将忽略分区表 %zu 中的额外数据。"

#: libfdisk/src/dos.c:651
#, c-format
msgid "omitting empty partition (%zu)"
msgstr "将忽略空分区(%zu)"

#: libfdisk/src/dos.c:711
#, fuzzy, c-format
#| msgid "Created a new DOS disklabel with disk identifier 0x%08x."
msgid "Created a new DOS (MBR) disklabel with disk identifier 0x%08x."
msgstr "创建了一个磁盘标识符为 0x%08x 的新 DOS 磁盘标签。"

#: libfdisk/src/dos.c:734
msgid "Enter the new disk identifier"
msgstr "输入新磁盘标识符"

#: libfdisk/src/dos.c:743
msgid "Incorrect value."
msgstr "无效的值。"

#: libfdisk/src/dos.c:756
#, c-format
msgid "Disk identifier changed from 0x%08x to 0x%08x."
msgstr "磁盘标识从 0x%08x 改为 0x%08x。"

#: libfdisk/src/dos.c:952
#, c-format
msgid "Ignoring extra extended partition %zu"
msgstr "将忽略额外的扩展分区 %zu"

#: libfdisk/src/dos.c:966
#, c-format
msgid "Invalid flag 0x%02x%02x of EBR (for partition %zu) will be corrected by w(rite)."
msgstr "分区表 %3$zu 的无效标志 0x%1$02x%2$02x 将通过写入来更正"

#: libfdisk/src/dos.c:1037
#, c-format
msgid "Start sector %ju out of range."
msgstr "起始扇区 %ju 超出范围。"

#: libfdisk/src/dos.c:1276 libfdisk/src/gpt.c:2409 libfdisk/src/sgi.c:842
#: libfdisk/src/sun.c:528
#, c-format
msgid "Partition %zu is already defined.  Delete it before re-adding it."
msgstr "分区 %zu 已经定义过。请删除后再重新添加它。"

#: libfdisk/src/dos.c:1291 libfdisk/src/dos.c:1317 libfdisk/src/dos.c:1375
#: libfdisk/src/dos.c:1407 libfdisk/src/gpt.c:2418
msgid "No free sectors available."
msgstr "无空闲扇区可用。"

#: libfdisk/src/dos.c:1342
#, c-format
msgid "Sector %ju is already allocated."
msgstr "扇区 %ju 已经分配。"

#: libfdisk/src/dos.c:1562
#, c-format
msgid "Adding logical partition %zu"
msgstr "添加逻辑分区 %zu"

#: libfdisk/src/dos.c:1594
#, c-format
msgid "Partition %zu: contains sector 0"
msgstr "分区 %zu：包含扇区 0"

#: libfdisk/src/dos.c:1598
#, c-format
msgid "Partition %zu: head %d greater than maximum %d"
msgstr "分区 %zu：磁头 %d 大于最大值 %d"

#: libfdisk/src/dos.c:1603
#, fuzzy, c-format
#| msgid "Partition %zu: sector %d greater than maximum %llu"
msgid "Partition %zu: sector %d greater than maximum %ju"
msgstr "分区 %zu：扇区 %d 大于最大值 %llu"

#: libfdisk/src/dos.c:1609
#, fuzzy, c-format
#| msgid "Partition %zu: cylinder %d greater than maximum %llu"
msgid "Partition %zu: cylinder %d greater than maximum %ju"
msgstr "分区 %zu：柱面 %d 大于最大值 %llu"

#: libfdisk/src/dos.c:1616
#, fuzzy, c-format
#| msgid "Partition %zu: previous sectors %u disagrees with total %u"
msgid "Partition %zu: LBA sector %u disagrees with C/H/S calculated sector %u"
msgstr "分区 %zu：之前的扇区数 %u 与总数 %u 不符"

#: libfdisk/src/dos.c:1675
#, c-format
msgid "Partition %zu: different physical/logical beginnings (non-Linux?): phys=(%d, %d, %d), logical=(%d, %d, %d)"
msgstr "分区 %zu 的物理/逻辑起点不同(非 Linux 分区？)：物理=(%d, %d, %d), 逻辑=(%d, %d, %d)"

#: libfdisk/src/dos.c:1687
#, c-format
msgid "Partition %zu: different physical/logical endings: phys=(%d, %d, %d), logical=(%d, %d, %d)"
msgstr "分区 %zu 的物理/逻辑终点不同：物理=(%d, %d, %d), 逻辑=(%d, %d, %d)"

#: libfdisk/src/dos.c:1697
#, c-format
msgid "Partition %zu: does not end on cylinder boundary."
msgstr "分区 %zu 未结束在柱面边界上。"

#: libfdisk/src/dos.c:1748
#, c-format
msgid "Partition %zu: bad start-of-data."
msgstr "分区 %zu：数据起点错误。"

#: libfdisk/src/dos.c:1764
#, c-format
msgid "Partition %zu: overlaps partition %zu."
msgstr "分区 %zu：与 分区 %zu 重叠。"

#: libfdisk/src/dos.c:1793
#, c-format
msgid "Partition %zu: empty."
msgstr "分区 %zu：空分区。"

#: libfdisk/src/dos.c:1800
#, c-format
msgid "Logical partition %zu: not entirely in partition %zu."
msgstr "逻辑分区 %zu：没有完全在分区 %zu 中。"

#: libfdisk/src/dos.c:1809 libfdisk/src/gpt.c:2315
msgid "No errors detected."
msgstr "未检测到错误。"

#: libfdisk/src/dos.c:1811
#, fuzzy, c-format
#| msgid "Total allocated sectors %llu greater than the maximum %llu."
msgid "Total allocated sectors %ju greater than the maximum %ju."
msgstr "分配的总扇区数 %llu 大于最大值 %llu。"

#: libfdisk/src/dos.c:1814
#, fuzzy, c-format
#| msgid "Remaining %lld unallocated %ld-byte sectors."
msgid "Remaining %ju unallocated %ld-byte sectors."
msgstr "剩余 %lld 未分配的 %ld字节 扇区。"

#: libfdisk/src/dos.c:1818 libfdisk/src/gpt.c:2335
#, c-format
msgid "%d error detected."
msgid_plural "%d errors detected."
msgstr[0] "检测到 %d 个错误。"

#: libfdisk/src/dos.c:1851
msgid "The maximum number of partitions has been created."
msgstr "已创建分区达到最大数量。"

#: libfdisk/src/dos.c:1884 libfdisk/src/dos.c:1899 libfdisk/src/dos.c:2352
msgid "Extended partition already exists."
msgstr "扩展分区已存在。"

#: libfdisk/src/dos.c:1914
msgid "Extended partition does not exists. Failed to add logical partition."
msgstr "扩展分区不存在。添加逻辑分区失败。"

#: libfdisk/src/dos.c:1974
msgid "All primary partitions are in use."
msgstr "所有主分区都在使用中。"

#: libfdisk/src/dos.c:1976 libfdisk/src/dos.c:1988
msgid "All space for primary partitions is in use."
msgstr "所有主分区的空间都在使用中。"

#. TRANSLATORS: Try to keep this within 80 characters.
#: libfdisk/src/dos.c:1991
msgid "To create more partitions, first replace a primary with an extended partition."
msgstr "要创建更多分区，请先将一个主分区替换为扩展分区。"

#: libfdisk/src/dos.c:2012
msgid "Partition type"
msgstr "分区类型"

#: libfdisk/src/dos.c:2016
#, c-format
msgid "%u primary, %d extended, %u free"
msgstr "%u个主分区，%d个扩展分区，%u空闲"

#: libfdisk/src/dos.c:2021
msgid "primary"
msgstr "主分区"

#: libfdisk/src/dos.c:2023
msgid "extended"
msgstr "扩展分区"

#: libfdisk/src/dos.c:2023
msgid "container for logical partitions"
msgstr "逻辑分区容器"

#: libfdisk/src/dos.c:2025
msgid "logical"
msgstr "逻辑分区"

#: libfdisk/src/dos.c:2025
msgid "numbered from 5"
msgstr "从 5 开始编号"

#: libfdisk/src/dos.c:2064
#, c-format
msgid "Invalid partition type `%c'."
msgstr "无效的分区类型“%c”。"

#: libfdisk/src/dos.c:2082
#, c-format
msgid "Cannot write sector %jd: seek failed"
msgstr "写扇区 %jd 失败：定位失败"

#: libfdisk/src/dos.c:2242 libfdisk/src/gpt.c:1291
msgid "Disk identifier"
msgstr "磁盘标识符"

#: libfdisk/src/dos.c:2357
msgid "Type 0 means free space to many systems. Having partitions of type 0 is probably unwise."
msgstr "很多系统将类型 0 视为空闲空间。不建议设置类型为 0 的分区。"

#: libfdisk/src/dos.c:2362
msgid "Cannot change type of the extended partition which is already used by logical partitions. Delete logical partitions first."
msgstr "无法更改已被逻辑分区使用的扩展分区的类型。请先删除逻辑分区。"

#: libfdisk/src/dos.c:2684
#, c-format
msgid "Partition %zu: no data area."
msgstr "分区 %zu：无数据区。"

#: libfdisk/src/dos.c:2718
msgid "New beginning of data"
msgstr "新数据起点"

#: libfdisk/src/dos.c:2735
msgid "The new beginning of the partition overlaps the disk label area. Be very careful when using the partition. You can lose all your partitions on the disk."
msgstr ""

#: libfdisk/src/dos.c:2781
#, c-format
msgid "Partition %zu: is an extended partition."
msgstr "分区 %zu：是一个扩展分区。"

#: libfdisk/src/dos.c:2787
#, c-format
msgid "The bootable flag on partition %zu is enabled now."
msgstr "分区 %zu 的 可启动 标志已启用。"

#: libfdisk/src/dos.c:2788
#, c-format
msgid "The bootable flag on partition %zu is disabled now."
msgstr "分区 %zu 的 可启动 标志已禁用。"

#: libfdisk/src/dos.c:2801 libfdisk/src/gpt.c:3243 libfdisk/src/sgi.c:1158
#: libfdisk/src/sun.c:1129
msgid "Device"
msgstr "设备"

#: libfdisk/src/dos.c:2802 libfdisk/src/sun.c:40
msgid "Boot"
msgstr "启动"

#: libfdisk/src/dos.c:2808 libfdisk/src/sgi.c:1164 libfdisk/src/sun.c:1135
msgid "Id"
msgstr "Id"

#: libfdisk/src/dos.c:2812
msgid "Start-C/H/S"
msgstr "起始-C/H/S"

#: libfdisk/src/dos.c:2813
msgid "End-C/H/S"
msgstr "终-C/H/S"

#: libfdisk/src/dos.c:2814 libfdisk/src/gpt.c:3253 libfdisk/src/sgi.c:1166
msgid "Attrs"
msgstr "属性"

#: libfdisk/src/gpt.c:691
msgid "failed to allocate GPT header"
msgstr "分配 GPT 头失败"

#: libfdisk/src/gpt.c:800
msgid "First LBA specified by script is out of range."
msgstr "脚本指定的第一个 LBA 超出范围。"

#: libfdisk/src/gpt.c:812
msgid "Last LBA specified by script is out of range."
msgstr "脚本指定的最后一个 LBA 超出范围。"

#: libfdisk/src/gpt.c:953
#, c-format
msgid "GPT PMBR size mismatch (%<PRIu64> != %<PRIu64>) will be corrected by write."
msgstr "GPT PMBR 大小不符（%<PRIu64> != %<PRIu64>），将用写入予以更正。"

#: libfdisk/src/gpt.c:978
msgid "gpt: stat() failed"
msgstr "gpt：stat() 失败"

#: libfdisk/src/gpt.c:988
#, c-format
msgid "gpt: cannot handle files with mode %o"
msgstr "gpt：无法操作模式为 %o 的文件"

#: libfdisk/src/gpt.c:1248
msgid "GPT Header"
msgstr "GPT 头"

#: libfdisk/src/gpt.c:1253
msgid "GPT Entries"
msgstr "GPT 记录项"

#: libfdisk/src/gpt.c:1259
msgid "GPT Backup Entries"
msgstr "GPT 备份记录项"

#: libfdisk/src/gpt.c:1265
msgid "GPT Backup Header"
msgstr "GPT 备份头"

#: libfdisk/src/gpt.c:1298
msgid "First usable LBA"
msgstr "第一个可用 LBA"

#: libfdisk/src/gpt.c:1303
msgid "Last usable LBA"
msgstr "最后一个可用 LBA"

#. TRANSLATORS: The LBA (Logical Block Address) of the backup GPT header.
#: libfdisk/src/gpt.c:1309
msgid "Alternative LBA"
msgstr "替代 LBA"

#. TRANSLATORS: The start of the array of partition entries.
#: libfdisk/src/gpt.c:1315
#, fuzzy
#| msgid "Partition entries LBA"
msgid "Partition entries starting LBA"
msgstr "分区记录项 LBA"

#. TRANSLATORS: The end of the array of partition entries.
#: libfdisk/src/gpt.c:1321
#, fuzzy
#| msgid "Partition entries LBA"
msgid "Partition entries ending LBA"
msgstr "分区记录项 LBA"

#: libfdisk/src/gpt.c:1328
msgid "Allocated partition entries"
msgstr "已分配的分区项"

#: libfdisk/src/gpt.c:1670
msgid "The backup GPT table is corrupt, but the primary appears OK, so that will be used."
msgstr "备份 GPT 表损坏，但主表似乎正常，将使用它。"

#: libfdisk/src/gpt.c:1680
msgid "The primary GPT table is corrupt, but the backup appears OK, so that will be used."
msgstr "主 GPT 表损坏，但备份似乎正常，将使用它。"

#: libfdisk/src/gpt.c:1696
msgid "The backup GPT table is not on the end of the device."
msgstr "备份 GPT 表不在设备的末尾位置。"

#: libfdisk/src/gpt.c:1699
msgid "The backup GPT table is not on the end of the device. This problem will be corrected by write."
msgstr ""

#: libfdisk/src/gpt.c:1703
#, fuzzy
#| msgid "failed to allocate output table"
msgid "Failed to recalculate backup GPT table location"
msgstr "分配输出表失败"

#: libfdisk/src/gpt.c:1858
#, c-format
msgid "unsupported GPT attribute bit '%s'"
msgstr "不支持的 GPT 属性位“%s”"

#: libfdisk/src/gpt.c:1863
#, fuzzy, c-format
#| msgid "failed to parse list '%s'"
msgid "failed to parse GPT attribute string '%s'"
msgstr "解析列表“%s”失败"

#: libfdisk/src/gpt.c:1963
#, c-format
msgid "Partition UUID changed from %s to %s."
msgstr "分区 UUID 已从 %s 更改为 %s。"

#: libfdisk/src/gpt.c:1972
msgid "Failed to translate partition name, name not changed."
msgstr "翻译分区名称失败，名称未改变。"

#: libfdisk/src/gpt.c:1974
#, c-format
msgid "Partition name changed from '%s' to '%.*s'."
msgstr "分区名已由“%s”改为“%.*s”。"

#: libfdisk/src/gpt.c:2003
msgid "The start of the partition understeps FirstUsableLBA."
msgstr "分区起点未到首个可用 LBA。"

#: libfdisk/src/gpt.c:2010
msgid "The end of the partition oversteps LastUsableLBA."
msgstr "分区终点超过了最后可用 LBA。"

#: libfdisk/src/gpt.c:2203
msgid "The device contains hybrid MBR -- writing GPT only."
msgstr "该设备包含混合 MBR -- 将只写入 GPT。"

#: libfdisk/src/gpt.c:2239
msgid "Disk does not contain a valid backup header."
msgstr "磁盘不含有效的备用磁头。"

#: libfdisk/src/gpt.c:2244
msgid "Invalid primary header CRC checksum."
msgstr "无效的主磁头 CRC 校验和。"

#: libfdisk/src/gpt.c:2248
msgid "Invalid backup header CRC checksum."
msgstr "无效的备份磁头 CRC 校验和。"

#: libfdisk/src/gpt.c:2253
msgid "Invalid partition entry checksum."
msgstr "无效的分区记录校验和。"

#: libfdisk/src/gpt.c:2258
msgid "Invalid primary header LBA sanity checks."
msgstr "无效的主磁头 LBA 完整性检查。"

#: libfdisk/src/gpt.c:2262
msgid "Invalid backup header LBA sanity checks."
msgstr "无效的备用磁头 LBA 完整性检查。"

#: libfdisk/src/gpt.c:2267
msgid "MyLBA mismatch with real position at primary header."
msgstr "MyLBA 不匹配，真正位置在主磁头。"

#: libfdisk/src/gpt.c:2271
msgid "MyLBA mismatch with real position at backup header."
msgstr "MyLBA 不匹配，真正位置在备份磁头。"

#: libfdisk/src/gpt.c:2276
msgid "Disk is too small to hold all data."
msgstr "磁盘太小，放不下所有数据。"

#: libfdisk/src/gpt.c:2286
msgid "Primary and backup header mismatch."
msgstr "主磁头和备份磁头不匹配。"

#: libfdisk/src/gpt.c:2292
#, c-format
msgid "Partition %u overlaps with partition %u."
msgstr "分区 %u 与 %u 重叠。"

#: libfdisk/src/gpt.c:2299
#, c-format
msgid "Partition %u is too big for the disk."
msgstr "分区 %u 对于该磁盘而言过大。"

#: libfdisk/src/gpt.c:2306
#, c-format
msgid "Partition %u ends before it starts."
msgstr "分区 %u 结束于起点之前。"

#: libfdisk/src/gpt.c:2316
#, c-format
msgid "Header version: %s"
msgstr "磁头版本：%s"

#: libfdisk/src/gpt.c:2317
#, fuzzy, c-format
#| msgid "Using %u out of %d partitions."
msgid "Using %zu out of %zu partitions."
msgstr "使用着 %2$d 个分区中的 %1$u 个。"

#: libfdisk/src/gpt.c:2327
#, c-format
msgid "A total of %ju free sectors is available in %u segment."
msgid_plural "A total of %ju free sectors is available in %u segments (the largest is %s)."
msgstr[0] "%2$u 个片段中共有 %1$ju 个空闲扇区(最大的是 %3$s)。"

#: libfdisk/src/gpt.c:2414
msgid "All partitions are already in use."
msgstr "所有分区均已占用。"

#: libfdisk/src/gpt.c:2465
#, fuzzy
#| msgid "No free sectors available."
msgid "No enough free sectors available."
msgstr "无空闲扇区可用。"

#: libfdisk/src/gpt.c:2479 libfdisk/src/gpt.c:2506
#, c-format
msgid "Sector %ju already used."
msgstr "扇区 %ju 已使用。"

#: libfdisk/src/gpt.c:2580
#, c-format
msgid "Could not create partition %zu"
msgstr "无法创建分区 %zu"

#: libfdisk/src/gpt.c:2587
#, c-format
msgid "The last usable GPT sector is %ju, but %ju is requested."
msgstr "最后一个可用的 GPT 扇区是 %ju，但请求了 %ju。"

#: libfdisk/src/gpt.c:2594
#, c-format
msgid "The first usable GPT sector is %ju, but %ju is requested."
msgstr "第一个可用的 GPT 扇区是 %ju，但请求了 %ju。"

#: libfdisk/src/gpt.c:2733
#, c-format
msgid "Created a new GPT disklabel (GUID: %s)."
msgstr "已创建新的 GPT 磁盘标签(GUID: %s)。"

#: libfdisk/src/gpt.c:2736
#, fuzzy, c-format
#| msgid "The maximum number of partitions has been created."
msgid "The maximal number of partitions is %zu (default is %zu)."
msgstr "已创建分区达到最大数量。"

#: libfdisk/src/gpt.c:2758
msgid "Enter new disk UUID (in 8-4-4-4-12 format)"
msgstr "输入新磁盘 UUID(以 8-4-4-4-12 格式)"

#: libfdisk/src/gpt.c:2766
msgid "Failed to parse your UUID."
msgstr "解析您的 UUID 失败。"

#: libfdisk/src/gpt.c:2780
#, c-format
msgid "Disk identifier changed from %s to %s."
msgstr "将磁盘标识从 %s 更改为 %s 失败。"

#: libfdisk/src/gpt.c:2800
msgid "Not enough space for new partition table!"
msgstr "创建新分区表的空闲空间不够！"

#: libfdisk/src/gpt.c:2811
#, fuzzy, c-format
#| msgid "Partition #%u out of range (minimal start is %<PRIu64> sectors)"
msgid "Partition #%zu out of range (minimal start is %<PRIu64> sectors)"
msgstr "分区 #%u 超出范围(最小起点是 %<PRIu64> 扇区)"

#: libfdisk/src/gpt.c:2816
#, fuzzy, c-format
#| msgid "Partition #%u out of range (maximal end is %<PRIu64> sectors)"
msgid "Partition #%zu out of range (maximal end is %<PRIu64> sectors)"
msgstr "分区 #%u 超出范围(最小终点是 %<PRIu64> 扇区)"

#: libfdisk/src/gpt.c:2862
msgid "The partition entry size is zero."
msgstr "分区条目大小为零。"

#: libfdisk/src/gpt.c:2864
#, c-format
msgid "The number of the partition has to be smaller than %zu."
msgstr "分区数量必须小于 %zu。"

#: libfdisk/src/gpt.c:2888
msgid "Cannot allocate memory!"
msgstr "无法分配内存！"

#: libfdisk/src/gpt.c:2917
#, fuzzy, c-format
#| msgid "Partition table length changed from %<PRIu32> to %<PRIu64>."
msgid "Partition table length changed from %<PRIu32> to %<PRIu32>."
msgstr "分区表长度已从 %<PRIu32> 改为 %<PRIu64>。"

#: libfdisk/src/gpt.c:3027
#, c-format
msgid "The attributes on partition %zu changed to 0x%016<PRIx64>."
msgstr "分区 %zu 的属性已改为 0x%016<PRIx64>。"

#: libfdisk/src/gpt.c:3077
msgid "Enter GUID specific bit"
msgstr "输入 GUID 特定位"

#: libfdisk/src/gpt.c:3092
#, c-format
msgid "failed to toggle unsupported bit %lu"
msgstr "开/关不支持的位 %lu 失败"

#: libfdisk/src/gpt.c:3105
#, c-format
msgid "The GUID specific bit %d on partition %zu is enabled now."
msgstr "分区 %2$zu 上的 GUID 特定位 %1$d 现已启用。"

#: libfdisk/src/gpt.c:3106
#, c-format
msgid "The GUID specific bit %d on partition %zu is disabled now."
msgstr "分区 %2$zu 上的 GUID 特定位 %1$d 现已禁用。"

#: libfdisk/src/gpt.c:3110
#, c-format
msgid "The %s flag on partition %zu is enabled now."
msgstr "分区 %2$zu 上的标志 %1$s 现已启用。"

#: libfdisk/src/gpt.c:3111
#, c-format
msgid "The %s flag on partition %zu is disabled now."
msgstr "分区 %2$zu 上的标志 %1$s 现已禁用。"

#: libfdisk/src/gpt.c:3250
msgid "Type-UUID"
msgstr "类型-UUID"

#: libfdisk/src/gpt.c:3251
msgid "UUID"
msgstr "UUID"

#: libfdisk/src/gpt.c:3252 login-utils/chfn.c:151 login-utils/chfn.c:153
#: login-utils/chfn.c:316
msgid "Name"
msgstr "名称"

#: libfdisk/src/label.c:597
msgid "Partitions order fixed."
msgstr "已修复分区顺序。"

#: libfdisk/src/label.c:600
msgid "Nothing to do. Ordering is correct already."
msgstr "无须操作。顺序已经是正确的了。"

#: libfdisk/src/label.c:603
msgid "Failed to fix partitions order."
msgstr "修复分区顺序失败。"

#: libfdisk/src/partition.c:871
msgid "Free space"
msgstr "剩余空间"

#: libfdisk/src/partition.c:1365
#, c-format
msgid "Failed to resize partition #%zu."
msgstr "调整分区 #%zu 的大小失败。"

#: libfdisk/src/parttype.c:291 misc-utils/findmnt.c:753
#: misc-utils/uuidparse.c:199 misc-utils/uuidparse.c:217 schedutils/chrt.c:127
#: schedutils/ionice.c:81 sys-utils/hwclock.c:286
msgid "unknown"
msgstr "未知"

#: libfdisk/src/script.c:820
msgid "The script and device sector size differ; the sizes will be recalculated to match the device."
msgstr ""

#: libfdisk/src/script.c:1037
msgid "Can't recalculate partition start to the device sectors"
msgstr ""

#: libfdisk/src/script.c:1095
msgid "Can't recalculate partition size to the device sectors"
msgstr ""

#: libfdisk/src/script.c:1554
msgid "Ignore \"first-lba\" header due to sector size mismatch."
msgstr ""

#: libfdisk/src/script.c:1558
msgid "Ignore \"last-lba\" header due to sector size mismatch."
msgstr ""

#: libfdisk/src/sgi.c:46
msgid "SGI volhdr"
msgstr "SGI volhdr"

#: libfdisk/src/sgi.c:47
msgid "SGI trkrepl"
msgstr "SGI trkrepl"

#: libfdisk/src/sgi.c:48
msgid "SGI secrepl"
msgstr "SGI secrepl"

#: libfdisk/src/sgi.c:49
msgid "SGI raw"
msgstr "SGI raw"

#: libfdisk/src/sgi.c:50
msgid "SGI bsd"
msgstr "SGI bsd"

#: libfdisk/src/sgi.c:51
msgid "SGI sysv"
msgstr "SGI sysv"

#: libfdisk/src/sgi.c:52
msgid "SGI volume"
msgstr "SGI volume"

#: libfdisk/src/sgi.c:53
msgid "SGI efs"
msgstr "SGI efs"

#: libfdisk/src/sgi.c:54
msgid "SGI lvol"
msgstr "SGI lvol"

#: libfdisk/src/sgi.c:55
msgid "SGI rlvol"
msgstr "SGI rlvol"

#: libfdisk/src/sgi.c:56
msgid "SGI xfs"
msgstr "SGI xfs"

#: libfdisk/src/sgi.c:57
msgid "SGI xfslog"
msgstr "SGI xfslog"

#: libfdisk/src/sgi.c:58
msgid "SGI xlv"
msgstr "SGI xlv"

#: libfdisk/src/sgi.c:59
msgid "SGI xvm"
msgstr "SGI xvm"

#: libfdisk/src/sgi.c:61 libfdisk/src/sun.c:52
msgid "Linux native"
msgstr "Linux native"

#: libfdisk/src/sgi.c:158
msgid "SGI info created on second sector."
msgstr "在第二扇区创建了 SGI 信息。"

#: libfdisk/src/sgi.c:258
msgid "Detected an SGI disklabel with wrong checksum."
msgstr "检测到校验和错误的 sgi 磁盘标签。"

#: libfdisk/src/sgi.c:281 libfdisk/src/sun.c:793
msgid "Physical cylinders"
msgstr "物理柱面数"

#: libfdisk/src/sgi.c:286 libfdisk/src/sun.c:798
msgid "Extra sects/cyl"
msgstr "额外扇区/柱面"

#: libfdisk/src/sgi.c:296
msgid "Bootfile"
msgstr "启动文件"

#: libfdisk/src/sgi.c:394
msgid "Invalid bootfile!  The bootfile must be an absolute non-zero pathname, e.g. \"/unix\" or \"/unix.save\"."
msgstr "无效的启动文件！启动文件必须为绝对非零路径名，例如“/unix”或“/unix.save”。"

#: libfdisk/src/sgi.c:402
#, c-format
msgid "Name of bootfile is too long: %zu byte maximum."
msgid_plural "Name of bootfile is too long: %zu bytes maximum."
msgstr[0] "启动文件名过长：最多 %zu 个字节。"

#: libfdisk/src/sgi.c:411
msgid "Bootfile must have a fully qualified pathname."
msgstr "启动文件必须用完全限定路径名。"

#: libfdisk/src/sgi.c:417
msgid "Be aware that the bootfile is not checked for existence.  SGI's default is \"/unix\", and for backup \"/unix.save\"."
msgstr "注意，不会检查启动文件是否存在。SGI 默认值为“/unix”，备份为“/unix.save”。"

#: libfdisk/src/sgi.c:442
#, c-format
msgid "The current boot file is: %s"
msgstr "当前启动文件为：%s"

#: libfdisk/src/sgi.c:444
msgid "Enter of the new boot file"
msgstr "输入新启动文件的路径"

#: libfdisk/src/sgi.c:449
msgid "Boot file is unchanged."
msgstr "启动文件未改变。"

#: libfdisk/src/sgi.c:460
#, c-format
msgid "Bootfile has been changed to \"%s\"."
msgstr "启动文件已更改为“%s”。"

#: libfdisk/src/sgi.c:599
msgid "More than one entire disk entry present."
msgstr "存在超过一个整磁盘记录。"

#: libfdisk/src/sgi.c:606 libfdisk/src/sun.c:467
msgid "No partitions defined."
msgstr "未定义分区。"

#: libfdisk/src/sgi.c:616
msgid "IRIX likes it when partition 11 covers the entire disk."
msgstr "IRIX 偏向于让分区 11 覆盖整个磁盘。"

#: libfdisk/src/sgi.c:620
#, c-format
msgid "The entire disk partition should start at block 0, not at block %d."
msgstr "整磁盘分区应开始于块 0，而非块 %d。"

#: libfdisk/src/sgi.c:631
msgid "Partition 11 should cover the entire disk."
msgstr "分区 11 应覆盖整个磁盘。"

#: libfdisk/src/sgi.c:655
#, c-format
msgid "Partitions %d and %d overlap by %d sector."
msgid_plural "Partitions %d and %d overlap by %d sectors."
msgstr[0] "分区 %d 与 %d 重叠了 %d 个扇区。"

#: libfdisk/src/sgi.c:666 libfdisk/src/sgi.c:688
#, c-format
msgid "Unused gap of %8u sector: sector %8u"
msgid_plural "Unused gap of %8u sectors: sectors %8u-%u"
msgstr[0] "有未使用的 %8u 个扇区的间隙：扇区 %8u-%u"

#: libfdisk/src/sgi.c:701
msgid "The boot partition does not exist."
msgstr "启动分区不存在。"

#: libfdisk/src/sgi.c:705
msgid "The swap partition does not exist."
msgstr "交换分区不存在。"

#: libfdisk/src/sgi.c:709
msgid "The swap partition has no swap type."
msgstr "交换分区不是交换类型。"

#: libfdisk/src/sgi.c:712
msgid "You have chosen an unusual bootfile name."
msgstr "您选择了一个不常用的启动文件名。"

#: libfdisk/src/sgi.c:762
msgid "Partition overlap on the disk."
msgstr "磁盘上的分区重叠。"

#: libfdisk/src/sgi.c:847
msgid "Attempting to generate entire disk entry automatically."
msgstr "尝试自动生成整磁盘记录。"

#: libfdisk/src/sgi.c:852
msgid "The entire disk is already covered with partitions."
msgstr "整个磁盘已经被分区覆盖。"

#: libfdisk/src/sgi.c:856
msgid "You got a partition overlap on the disk. Fix it first!"
msgstr "磁盘上有重叠分区。请先修复它！"

#: libfdisk/src/sgi.c:878 libfdisk/src/sun.c:563
#, c-format
msgid "First %s"
msgstr "起始 %s"

#: libfdisk/src/sgi.c:902 libfdisk/src/sgi.c:953
msgid "It is highly recommended that the eleventh partition covers the entire disk and is of type 'SGI volume'."
msgstr "强烈建议第十一分区覆盖整个磁盘，并使用“SGI volume”类型。"

#: libfdisk/src/sgi.c:917
#, c-format
msgid "Last %s or +%s or +size{K,M,G,T,P}"
msgstr "最后 %s 或+%s 或 +大小{K,M,G,T,P}"

#: libfdisk/src/sgi.c:989 libfdisk/src/sun.c:248
#, fuzzy, c-format
#| msgid "BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu. This value may be truncated for devices > 33.8 GB."
msgid "BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %ju. This value may be truncated for devices > 33.8 GB."
msgstr "对 %s 执行 BLKGETSIZE ioctl 失败。将使用几何 柱面 属性值 %llu。对于大于 33.8 GB 的设备，这个值可能被截短。"

#: libfdisk/src/sgi.c:1056
msgid "Created a new SGI disklabel."
msgstr "创建新的SGI 磁盘标签。"

#: libfdisk/src/sgi.c:1075
msgid "Sorry, only for non-empty partitions you can change the tag."
msgstr "抱歉，只有非空分区才能更改标志(tag)。"

#: libfdisk/src/sgi.c:1081
msgid "Consider leaving partition 9 as volume header (0), and partition 11 as entire volume (6), as IRIX expects it."
msgstr "考虑将分区 9 留作卷头(volume header) (0)，分区 11 作为整卷(6)，以符合 IRIX 规定。"

#: libfdisk/src/sgi.c:1090
msgid "It is highly recommended that the partition at offset 0 is of type \"SGI volhdr\", the IRIX system will rely on it to retrieve from its directory standalone tools like sash and fx. Only the \"SGI volume\" entire disk section may violate this. Are you sure about tagging this partition differently?"
msgstr "强烈建议偏移 0 处的分区设为“SGI volhdr”类型，IRIX 会依靠它从它的目录中获取独立的工具，如 sash 和 fx。只有“SGI volume”整磁盘部分(entire disk section)能违反这一规定。您确定要将这一分区标记成其他类型吗？"

#: libfdisk/src/sun.c:39
msgid "Unassigned"
msgstr "未分配"

#: libfdisk/src/sun.c:41
msgid "SunOS root"
msgstr "SunOS 根"

#: libfdisk/src/sun.c:42
msgid "SunOS swap"
msgstr "SunOS 交换"

#: libfdisk/src/sun.c:43
msgid "SunOS usr"
msgstr "SunOS usr"

#: libfdisk/src/sun.c:44
msgid "Whole disk"
msgstr "整盘"

#: libfdisk/src/sun.c:45
msgid "SunOS stand"
msgstr "SunOS stand"

#: libfdisk/src/sun.c:46
msgid "SunOS var"
msgstr "SunOS var"

#: libfdisk/src/sun.c:47
msgid "SunOS home"
msgstr "SunOS home"

#: libfdisk/src/sun.c:48
msgid "SunOS alt sectors"
msgstr "SunOS alt 扇区"

#: libfdisk/src/sun.c:49
msgid "SunOS cachefs"
msgstr "SunOS cachefs"

#: libfdisk/src/sun.c:50
msgid "SunOS reserved"
msgstr "SunOS 保留"

#: libfdisk/src/sun.c:86
#, c-format
msgid "#%zu: start cylinder overflows Sun label limits"
msgstr ""

#: libfdisk/src/sun.c:89
#, c-format
msgid "#%zu: number of sectors overflow Sun label limits"
msgstr ""

#: libfdisk/src/sun.c:136
msgid "Detected sun disklabel with wrong checksum. Probably you'll have to set all the values, e.g. heads, sectors, cylinders and partitions or force a fresh label (s command in main menu)"
msgstr "检测到校验和错误的 sun 磁盘标签。您可能要设置所有的值(如磁头、扇区、柱面和分区)或强制一个新标签(主菜单中的 s 命令)"

#: libfdisk/src/sun.c:153
#, c-format
msgid "Detected sun disklabel with wrong version [%d]."
msgstr "检测到带错误版本 [%d] 的 sun 磁盘标签 。"

#: libfdisk/src/sun.c:158
#, c-format
msgid "Detected sun disklabel with wrong vtoc.sanity [0x%08x]."
msgstr "检测到带错误的 vtoc.sanity [0x%08x] 的 sun 磁盘标签。"

#: libfdisk/src/sun.c:163
#, c-format
msgid "Detected sun disklabel with wrong vtoc.nparts [%u]."
msgstr "检测到带错误 vtoc.nparts [%u] 的 sun 磁盘标签。"

#: libfdisk/src/sun.c:168
msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)"
msgstr "警告：错误值需要修复，并且将通过 w(写) 操作修正。"

#: libfdisk/src/sun.c:193
msgid "Heads"
msgstr "磁头"

#: libfdisk/src/sun.c:198
msgid "Sectors/track"
msgstr "扇区/磁道"

#: libfdisk/src/sun.c:301
msgid "Created a new Sun disklabel."
msgstr "创建新的 Sun 磁盘标签。"

#: libfdisk/src/sun.c:425
#, c-format
msgid "Partition %u doesn't end on cylinder boundary."
msgstr "分区 %u 未结束在柱面边界上。"

#: libfdisk/src/sun.c:444
#, c-format
msgid "Partition %u overlaps with others in sectors %u-%u."
msgstr "分区 %u 在扇区 %u-%u 与其他分区重叠。"

#: libfdisk/src/sun.c:472
#, c-format
msgid "Unused gap - sectors 0-%u."
msgstr "未使用的间隙 - 扇区 0-%u。"

#: libfdisk/src/sun.c:474 libfdisk/src/sun.c:480
#, c-format
msgid "Unused gap - sectors %u-%u."
msgstr "未使用的间隙 - 扇区 %u-%u。"

#: libfdisk/src/sun.c:542
msgid "Other partitions already cover the whole disk. Delete some/shrink them before retry."
msgstr "其他分区已覆盖了整个磁盘。删除几个分区或压缩它们，然后重试。"

#: libfdisk/src/sun.c:559
msgid "It is highly recommended that the third partition covers the whole disk and is of type `Whole disk'"
msgstr "强烈建议让第三个分区覆盖整个磁盘，并设为“整盘”类型"

#: libfdisk/src/sun.c:601
#, c-format
msgid "Aligning the first sector from %u to %u to be on cylinder boundary."
msgstr "将把从 %u 到 %u 的首个扇区对齐到柱面边界。"

#: libfdisk/src/sun.c:629
#, c-format
msgid "Sector %d is already allocated"
msgstr "扇区 %d 已分配"

#: libfdisk/src/sun.c:658
#, c-format
msgid "Last %s or +/-%s or +/-size{K,M,G,T,P}"
msgstr "最后 %s 或 +/-%s 或 +/-大小{K,M,G,T,P}"

#: libfdisk/src/sun.c:706
#, c-format
msgid ""
"You haven't covered the whole disk with the 3rd partition, but your value\n"
"%lu %s covers some other partition. Your entry has been changed\n"
"to %lu %s"
msgstr ""
"您没有使第三个分区覆盖整个磁盘，但是值 %lu %s 覆盖了其他分区。\n"
"您的记录已经更改为 %lu %s"

#: libfdisk/src/sun.c:749
#, c-format
msgid "If you want to maintain SunOS/Solaris compatibility, consider leaving this partition as Whole disk (5), starting at 0, with %u sectors"
msgstr "如果您想与 SunOS/Solaris 兼容，请保持此分区为 整盘 (5)，以 0 开始，大小为 %u 个扇区"

#: libfdisk/src/sun.c:773
msgid "Label ID"
msgstr "标签 ID"

#: libfdisk/src/sun.c:778
msgid "Volume ID"
msgstr "卷 ID"

#: libfdisk/src/sun.c:788
msgid "Alternate cylinders"
msgstr "备用柱面数"

#: libfdisk/src/sun.c:894
msgid "Number of alternate cylinders"
msgstr "备用柱面的数量"

#: libfdisk/src/sun.c:919
msgid "Extra sectors per cylinder"
msgstr "每个柱面的额外扇区数"

#: libfdisk/src/sun.c:943
msgid "Interleave factor"
msgstr "交错系数"

#: libfdisk/src/sun.c:967
msgid "Rotation speed (rpm)"
msgstr "转速(转/分)"

#: libfdisk/src/sun.c:991
msgid "Number of physical cylinders"
msgstr "物理柱面数"

#: libfdisk/src/sun.c:1056
msgid ""
"Consider leaving partition 3 as Whole disk (5),\n"
"as SunOS/Solaris expects it and even Linux likes it.\n"
msgstr ""
"考虑保持分区 3 为 整盘 (5)，\n"
"这是 SunOS/Solaris 的规定，Linux 也建议这么做。\n"

#: libfdisk/src/sun.c:1067
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
"there may destroy your partition table and bootblock.\n"
"Are you sure you want to tag the partition as Linux swap?"
msgstr ""
"强烈建议偏移 0 处的分区为 UFS、EXT2FS 文件系统或\n"
"SunOS 交换分区。将 Linux 交换分区放在那里可能毁坏分区表\n"
"和启动锁。\n"
"您确信要把该分区标记为 Linux 交换分区吗？"

#: lib/logindefs.c:216
#, c-format
msgid "%s: %s contains invalid numerical value: %s"
msgstr "%s：%s 包含无效的数字值：%s"

#: lib/logindefs.c:266
#, c-format
msgid "Error reading login.defs: %s"
msgstr "读取 login.defs 出错：%s"

#: lib/logindefs.c:333 lib/logindefs.c:353 lib/logindefs.c:379
#, c-format
msgid "couldn't fetch %s: %s"
msgstr "无法读取%s：%s"

#: lib/logindefs.c:538
msgid "hush login status: restore original IDs failed"
msgstr "静默(hush)登录状态：恢复原 ID 失败"

#: libmount/src/context.c:2700
#, c-format
msgid "operation failed: %m"
msgstr "操作失败：%m"

#: libmount/src/context_mount.c:1404
#, c-format
msgid "WARNING: failed to apply propagation flags"
msgstr "警告：应用传播标志失败"

#: libmount/src/context_mount.c:1414
#, fuzzy, c-format
#| msgid "WARNING: device write-protected, mounted read-only"
msgid "WARNING: source write-protected, mounted read-only"
msgstr "警告：设备写保护，使用只读方式挂载"

#: libmount/src/context_mount.c:1428
#, c-format
msgid "operation permitted for root only"
msgstr "操作只允许由 root 进行"

#: libmount/src/context_mount.c:1432
#, c-format
msgid "%s is already mounted"
msgstr "%s 已经挂载"

#: libmount/src/context_mount.c:1438
#, c-format
msgid "can't find in %s"
msgstr "无法在 %s 中找到"

#: libmount/src/context_mount.c:1441
#, c-format
msgid "can't find mount point in %s"
msgstr "无法在 %s 中找到挂载点"

#: libmount/src/context_mount.c:1444
#, c-format
msgid "can't find mount source %s in %s"
msgstr "在 %2$s 中找不到挂载源 %1$s"

#: libmount/src/context_mount.c:1449
#, c-format
msgid "more filesystems detected on %s; use -t <type> or wipefs(8)"
msgstr "%s 上探测到了更多文件系统；请使用 -t <类型> 或 wipefs(8)"

#: libmount/src/context_mount.c:1454
#, c-format
msgid "failed to determine filesystem type"
msgstr "无法确定文件系统类型"

#: libmount/src/context_mount.c:1455
#, fuzzy, c-format
#| msgid "no filesystem type specified"
msgid "no valid filesystem type specified"
msgstr "未指定文件系统类型"

#: libmount/src/context_mount.c:1462
#, c-format
msgid "can't find %s"
msgstr "找不到 %s"

#: libmount/src/context_mount.c:1464
#, c-format
msgid "no mount source specified"
msgstr "未指定挂载来源"

#: libmount/src/context_mount.c:1475
#, fuzzy, c-format
#| msgid "failed to parse mount options: %m"
msgid "failed to parse mount options '%s': %m"
msgstr "解析挂臷选项失败：%m"

#: libmount/src/context_mount.c:1476
#, fuzzy, c-format
#| msgid "failed to parse mount options: %m"
msgid "failed to parse mount options '%s'"
msgstr "解析挂臷选项失败：%m"

#: libmount/src/context_mount.c:1479
#, c-format
msgid "failed to parse mount options: %m"
msgstr "解析挂臷选项失败：%m"

#: libmount/src/context_mount.c:1480
#, c-format
msgid "failed to parse mount options"
msgstr "解析挂臷选项失败"

#: libmount/src/context_mount.c:1485
#, fuzzy, c-format
#| msgid "%s: failed to setup loop device"
msgid "failed to setup loop device for %s"
msgstr "%s：设置回环设备失败"

#: libmount/src/context_mount.c:1489
#, fuzzy, c-format
#| msgid "%s: overlapping loop device exists"
msgid "overlapping loop device exists for %s"
msgstr "%s: 重叠的回环设备已存在"

#: libmount/src/context_mount.c:1493 libmount/src/context_umount.c:1263
#, c-format
msgid "locking failed"
msgstr "锁定失败"

#: libmount/src/context_mount.c:1497 libmount/src/context_umount.c:1269
#: sys-utils/umount.c:261 sys-utils/umount.c:277
#, c-format
msgid "failed to switch namespace"
msgstr "切换名字空间失败"

#: libmount/src/context_mount.c:1501
#, fuzzy, c-format
#| msgid "%s is already mounted"
msgid "filesystem already mounted"
msgstr "%s 已经挂载"

#: libmount/src/context_mount.c:1504
#, c-format
msgid "mount failed: %m"
msgstr "挂载失败：%m"

#: libmount/src/context_mount.c:1514
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was mounted, but failed to update userspace mount table"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_mount.c:1520
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was mounted, but failed to switch namespace back"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_mount.c:1526
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was mounted, but failed to change ownership: %m"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_mount.c:1532
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was mounted, but failed to change mode: %m"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_mount.c:1538
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was mounted, but failed to attach idmapping"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_mount.c:1544
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was mounted, but any subsequent operation failed: %m"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_mount.c:1562 libmount/src/context_mount.c:1607
#, c-format
msgid "mount point is not a directory"
msgstr "挂载点不是目录"

#: libmount/src/context_mount.c:1564 login-utils/newgrp.c:228
#, c-format
msgid "permission denied"
msgstr "权限不足"

#: libmount/src/context_mount.c:1566
#, c-format
msgid "must be superuser to use mount"
msgstr "必须以超级用户身份使用 mount"

#: libmount/src/context_mount.c:1573
#, c-format
msgid "mount point is busy"
msgstr "挂载点忙"

#: libmount/src/context_mount.c:1580
#, c-format
msgid "%s already mounted on %s"
msgstr "%s 已挂载于 %s"

#: libmount/src/context_mount.c:1584
#, c-format
msgid "%s already mounted or mount point busy"
msgstr "%s 已经挂载或挂载点忙"

#: libmount/src/context_mount.c:1589
#, c-format
msgid "mount point does not exist"
msgstr "挂载点不存在"

#: libmount/src/context_mount.c:1592
#, c-format
msgid "mount point is a symbolic link to nowhere"
msgstr "挂载点是一个没有目标的符号链接"

#: libmount/src/context_mount.c:1597
#, c-format
msgid "special device %s does not exist"
msgstr "特殊设备 %s 不存在"

#: libmount/src/context_mount.c:1600 libmount/src/context_mount.c:1616
#: libmount/src/context_mount.c:1700 libmount/src/context_mount.c:1723
#, c-format
msgid "mount(2) system call failed: %m"
msgstr "mount(2) 系统调用失败：%m"

#: libmount/src/context_mount.c:1612
#, c-format
msgid "special device %s does not exist (a path prefix is not a directory)"
msgstr "特殊设备 %s 不存在(路径前缀不是目录)"

#: libmount/src/context_mount.c:1624
#, c-format
msgid "mount point not mounted or bad option"
msgstr "挂载点未挂载或选项有误"

#: libmount/src/context_mount.c:1626
#, c-format
msgid "not mount point or bad option"
msgstr "不是一个挂载点或选项有误"

#: libmount/src/context_mount.c:1629
#, c-format
msgid "bad option; moving a mount residing under a shared mount is unsupported"
msgstr "选项错误；不支持移动位于共享挂载内的挂载"

#: libmount/src/context_mount.c:1633
#, c-format
msgid "bad option; for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program"
msgstr "选项错误；对某些文件系统（如 nfs、cifs）您可能需要一款 /sbin/mount.<类型> 的帮助程序"

#: libmount/src/context_mount.c:1637
#, c-format
msgid "wrong fs type, bad option, bad superblock on %s, missing codepage or helper program, or other error"
msgstr "文件系统类型错误、选项错误、%s 上有坏超级块、缺少代码页或帮助程序或其他错误"

#: libmount/src/context_mount.c:1644
#, c-format
msgid "mount table full"
msgstr "挂载表满"

#: libmount/src/context_mount.c:1649
#, c-format
msgid "can't read superblock on %s"
msgstr "无法读取 %s 上的超级块"

#: libmount/src/context_mount.c:1656
#, c-format
msgid "unknown filesystem type '%s'"
msgstr "未知的文件系统类型“%s”"

#: libmount/src/context_mount.c:1659
#, c-format
msgid "unknown filesystem type"
msgstr "未知的文件系统类型"

#: libmount/src/context_mount.c:1668
#, c-format
msgid "%s is not a block device, and stat(2) fails?"
msgstr "%s 不是块设备，而且 stat(2) 失败？"

#: libmount/src/context_mount.c:1671
#, c-format
msgid "the kernel does not recognize %s as a block device; maybe \"modprobe driver\" is necessary"
msgstr "内核无法将 %s 识别为块设备；也许需要“modprobe driver”"

#: libmount/src/context_mount.c:1674
#, c-format
msgid "%s is not a block device; try \"-o loop\""
msgstr "%s 不是块设备；请尝试“-o loop”"

#: libmount/src/context_mount.c:1676
#, c-format
msgid "%s is not a block device"
msgstr "%s 不是一个块设备"

#: libmount/src/context_mount.c:1683
#, c-format
msgid "%s is not a valid block device"
msgstr "%s 不是一个有效的块设备"

#: libmount/src/context_mount.c:1691
#, c-format
msgid "cannot mount %s read-only"
msgstr "无法以只读方式挂载 %s"

#: libmount/src/context_mount.c:1693
#, c-format
msgid "%s is write-protected but explicit read-write mode requested"
msgstr "%s 是写保护的，但明确请求了读写模式"

#: libmount/src/context_mount.c:1695
#, c-format
msgid "cannot remount %s read-write, is write-protected"
msgstr "无法以读写方式重新挂载 %s，它是写保护的"

#: libmount/src/context_mount.c:1697
#, c-format
msgid "bind %s failed"
msgstr "绑定 %s 失败"

#: libmount/src/context_mount.c:1708
#, c-format
msgid "no medium found on %s"
msgstr "在 %s 上找不到媒体"

#: libmount/src/context_mount.c:1715
#, c-format
msgid "cannot mount; probably corrupted filesystem on %s"
msgstr "无法挂载；%s 上的文件系统可能已损坏"

#: libmount/src/context_umount.c:1257 libmount/src/context_umount.c:1311
#, c-format
msgid "not mounted"
msgstr "未挂载"

#: libmount/src/context_umount.c:1273
#, c-format
msgid "umount failed: %m"
msgstr "挂载失败：%m"

#: libmount/src/context_umount.c:1282
#, c-format
msgid "filesystem was unmounted, but failed to update userspace mount table"
msgstr "文件系统已卸载，但更新用户空间挂载表失败"

#: libmount/src/context_umount.c:1288
#, c-format
msgid "filesystem was unmounted, but failed to switch namespace back"
msgstr ""

#: libmount/src/context_umount.c:1295
#, fuzzy, c-format
#| msgid "%s: filesystem was unmounted, but mount(8) failed"
msgid "filesystem was unmounted, but any subsequent operation failed: %m"
msgstr "%s：文件系统已卸载，但 mount(8) 失败"

#: libmount/src/context_umount.c:1308
#, c-format
msgid "invalid block device"
msgstr "无效的块设备"

#: libmount/src/context_umount.c:1314
#, c-format
msgid "can't write superblock"
msgstr "无法写超级块"

#: libmount/src/context_umount.c:1317
#, c-format
msgid "target is busy"
msgstr "目标忙"

#: libmount/src/context_umount.c:1320
#, c-format
msgid "no mount point specified"
msgstr "未指定挂载点"

#: libmount/src/context_umount.c:1323
#, c-format
msgid "must be superuser to unmount"
msgstr "必须以超级用户身份卸载"

#: libmount/src/context_umount.c:1326
#, c-format
msgid "block devices are not permitted on filesystem"
msgstr "文件系统不允许块设备"

#: libmount/src/context_umount.c:1329
#, c-format
msgid "umount(2) system call failed: %m"
msgstr "umount(2) 系统调用失败：%m"

#: lib/plymouth-ctrl.c:73
msgid "cannot open UNIX socket"
msgstr "无法打开 UNIX 套接字"

#: lib/plymouth-ctrl.c:79
msgid "cannot set option for UNIX socket"
msgstr "无法设置 UNIX 套接字选项"

#: lib/plymouth-ctrl.c:90
msgid "cannot connect on UNIX socket"
msgstr "无法连接 UNIX 套接字"

#: lib/plymouth-ctrl.c:128
#, c-format
msgid "the plymouth request %c is not implemented"
msgstr "plymouth 请求 %c 没有实现"

#: lib/randutils.c:191
msgid "getrandom() function"
msgstr "getrandom() 函数"

#: lib/randutils.c:204
msgid "libc pseudo-random functions"
msgstr "libc 伪随机函数"

#: lib/shells.c:36
#, fuzzy, c-format
#| msgid "cannot open lock file %s"
msgid "Cannot parse shells files: %s"
msgstr "不能打开锁文件 %s"

#: lib/shells.c:44
#, c-format
msgid "Cannot evaluate entries in shells files: %s"
msgstr ""

#: lib/swapprober.c:22 lib/swapprober.c:35
#, c-format
msgid "%s: unable to probe device"
msgstr "%s：无法探测设备"

#: lib/swapprober.c:37
#, c-format
msgid "%s: ambiguous probing result; use wipefs(8)"
msgstr "%s：探测结果有歧义；请使用 wipefs(8)"

#: lib/swapprober.c:39
#, c-format
msgid "%s: not a valid swap partition"
msgstr "%s：不是有效的交换分区"

#: lib/swapprober.c:46
#, c-format
msgid "%s: unsupported swap version '%s'"
msgstr "%s：不支持的 swap 版本“%s”"

#: lib/timeutils.c:513
msgid "format_iso_time: buffer overflow."
msgstr "format_iso_time：缓冲溢出。"

#: lib/timeutils.c:531 lib/timeutils.c:555
#, c-format
msgid "time %<PRId64> is out of range."
msgstr "时间 %<PRId64> 超出范围。"

#: login-utils/chfn.c:91 login-utils/chsh.c:70 login-utils/lslogins.c:1442
#, c-format
msgid " %s [options] [<username>]\n"
msgstr " %s [选项] [<用户名>]\n"

#: login-utils/chfn.c:94
msgid "Change your finger information.\n"
msgstr "更改您的 finger 信息。\n"

#: login-utils/chfn.c:97
msgid " -f, --full-name <full-name>  real name\n"
msgstr " -f, --full-name <全名>       真实姓名\n"

#: login-utils/chfn.c:98
msgid " -o, --office <office>        office number\n"
msgstr " -o, --office <办公>          办公号码\n"

#: login-utils/chfn.c:99
msgid " -p, --office-phone <phone>   office phone number\n"
msgstr " -p, --office-phone <电话>    办公电话\n"

#: login-utils/chfn.c:100
msgid " -h, --home-phone <phone>     home phone number\n"
msgstr " -h, --home-phone <电话>      住宅电话\n"

#: login-utils/chfn.c:118
#, c-format
msgid "field %s is too long"
msgstr "字段 %s 过长"

#: login-utils/chfn.c:122 login-utils/chsh.c:182
#, c-format
msgid "%s: has illegal characters"
msgstr "%s：含有非法字符"

#: login-utils/chfn.c:151 login-utils/chfn.c:157 login-utils/chfn.c:163
#: login-utils/chfn.c:169
#, c-format
msgid "login.defs forbids setting %s"
msgstr "login.defs 禁止设置 %s"

#: login-utils/chfn.c:157 login-utils/chfn.c:159 login-utils/chfn.c:318
msgid "Office"
msgstr "办公"

#: login-utils/chfn.c:163 login-utils/chfn.c:165 login-utils/chfn.c:320
msgid "Office Phone"
msgstr "办公电话"

#: login-utils/chfn.c:169 login-utils/chfn.c:171 login-utils/chfn.c:322
msgid "Home Phone"
msgstr "住宅电话"

#: login-utils/chfn.c:189 login-utils/chsh.c:135
msgid "cannot handle multiple usernames"
msgstr "无法处理多个用户名"

#: login-utils/chfn.c:240
msgid "Aborted."
msgstr "已中止。"

#: login-utils/chfn.c:304
#, c-format
msgid "%s: CHFN_RESTRICT has unexpected value: %s"
msgstr "%s: CHFN_RESTRICT 的值异常：%s"

#: login-utils/chfn.c:306
#, c-format
msgid "%s: CHFN_RESTRICT does not allow any changes"
msgstr "%s: CHFN_RESTRICT 不允许更改"

#: login-utils/chfn.c:388
#, c-format
msgid "Finger information *NOT* changed.  Try again later.\n"
msgstr "Finger 信息*没有*更改。请稍后重试。\n"

#: login-utils/chfn.c:392
#, c-format
msgid "Finger information changed.\n"
msgstr "Finger 信息已更改。\n"

#: login-utils/chfn.c:418 login-utils/chsh.c:219 sys-utils/unshare.c:426
#, c-format
msgid "you (user %d) don't exist."
msgstr "您(用户 %d)不存在。"

#: login-utils/chfn.c:424 login-utils/chsh.c:224 login-utils/libuser.c:59
#, c-format
msgid "user \"%s\" does not exist."
msgstr "用户“%s”不存在。"

#: login-utils/chfn.c:430 login-utils/chsh.c:230
msgid "can only change local entries"
msgstr "只能更改本地记录"

#: login-utils/chfn.c:439
#, c-format
msgid "%s is not authorized to change the finger info of %s"
msgstr "%s 未得到授权更改 %s 的 finger 信息"

#: login-utils/chfn.c:441 login-utils/chsh.c:240
msgid "Unknown user context"
msgstr "未知用户环境(context)"

#: login-utils/chfn.c:446 login-utils/chsh.c:245
#, c-format
msgid "can't set default context for %s"
msgstr "无法设置 %s 默认环境(context)"

#: login-utils/chfn.c:457
msgid "running UID doesn't match UID of user we're altering, change denied"
msgstr "运行中的 UID 与要改变的用户的 UID 不匹配，更改被拒绝"

#: login-utils/chfn.c:461
#, c-format
msgid "Changing finger information for %s.\n"
msgstr "正在更改 %s 的 finger 信息。\n"

#: login-utils/chfn.c:475
#, c-format
msgid "Finger information not changed.\n"
msgstr "Finger 信息未更改。\n"

#: login-utils/chsh.c:73
msgid "Change your login shell.\n"
msgstr "更改您的登录 shell。\n"

#: login-utils/chsh.c:76
msgid " -s, --shell <shell>  specify login shell\n"
msgstr " -s, --shell <shell>  指定登录 shell\n"

#: login-utils/chsh.c:77
msgid " -l, --list-shells    print list of shells and exit\n"
msgstr " -l, --list-shells    打印 shell 列表并退出\n"

#: login-utils/chsh.c:176
msgid "shell must be a full path name"
msgstr "shell 必须为完整路径名称"

#: login-utils/chsh.c:178
#, c-format
msgid "\"%s\" does not exist"
msgstr "“%s”不存在"

#: login-utils/chsh.c:180
#, c-format
msgid "\"%s\" is not executable"
msgstr "“%s”不可执行"

#: login-utils/chsh.c:186
#, c-format
msgid "Warning: \"%s\" is not listed in %s."
msgstr "警告：“%s”未在 %s 中列出。"

#: login-utils/chsh.c:190 login-utils/chsh.c:194
#, c-format
msgid ""
"\"%s\" is not listed in %s.\n"
"Use %s -l to see list."
msgstr ""
"“%s”未列在 %s 中。\n"
"请使用 %s -l 查看列表。"

#: login-utils/chsh.c:239
#, c-format
msgid "%s is not authorized to change the shell of %s"
msgstr "%s 无权更改 %s 的 shell"

#: login-utils/chsh.c:264
msgid "running UID doesn't match UID of user we're altering, shell change denied"
msgstr "运行 UID 与要更改的用户的 UID 不匹配，更改 shell 被拒绝"

#: login-utils/chsh.c:269
#, c-format
msgid "your shell is not in %s, shell change denied"
msgstr "您的 shell 不在 %s 中，更改 shell 被拒绝"

#: login-utils/chsh.c:273
#, c-format
msgid "Changing shell for %s.\n"
msgstr "正在更改 %s 的 shell。\n"

#: login-utils/chsh.c:281
msgid "New shell"
msgstr "新 shell"

#: login-utils/chsh.c:289
msgid "Shell not changed."
msgstr "Shell 未更改。"

#: login-utils/chsh.c:294
msgid "Shell *NOT* changed.  Try again later."
msgstr "Shell *未* 更改。请稍后重试。"

#: login-utils/chsh.c:298
msgid ""
"setpwnam failed\n"
"Shell *NOT* changed.  Try again later."
msgstr ""
"setpwnam 失败\n"
"Shell *未* 更改。请稍后重试。"

#: login-utils/chsh.c:302
#, c-format
msgid "Shell changed.\n"
msgstr "Shell 已更改。\n"

#: login-utils/islocal.c:95
#, c-format
msgid "Usage: %s <passwordfile> <username>...\n"
msgstr "用法：%s <密码文件> <用户名>...\n"

#: login-utils/last.c:175 login-utils/lslogins.c:1433 sys-utils/dmesg.c:1342
#: sys-utils/lsipc.c:283
#, c-format
msgid "unknown time format: %s"
msgstr "未知时间格式: %s"

#: login-utils/last.c:439 login-utils/last.c:450 login-utils/last.c:901
msgid "preallocation size exceeded"
msgstr "超过了预分配大小"

#: login-utils/last.c:568
#, c-format
msgid " %s [options] [<username>...] [<tty>...]\n"
msgstr " %s [选项] [<用户名>...] [<tty>...]\n"

#: login-utils/last.c:571
msgid "Show a listing of last logged in users.\n"
msgstr "显示上次登录用户的列表。\n"

#: login-utils/last.c:574
msgid " -<number>            how many lines to show\n"
msgstr " -<数字>              显示行数\n"

#: login-utils/last.c:575
msgid " -a, --hostlast       display hostnames in the last column\n"
msgstr " -a, --hostlast       最后一列显示主机名\n"

#: login-utils/last.c:576
msgid " -d, --dns            translate the IP number back into a hostname\n"
msgstr " -d, --dns            将 IP 号转换回主机名\n"

#: login-utils/last.c:578
#, c-format
msgid " -f, --file <file>    use a specific file instead of %s\n"
msgstr " -F, --file <文件>    用指定文件代替 %s\n"

#: login-utils/last.c:579
msgid " -F, --fulltimes      print full login and logout times and dates\n"
msgstr " -F, --fulltimes      打印完整的登录和注销时间和日期\n"

#: login-utils/last.c:580
msgid " -i, --ip             display IP numbers in numbers-and-dots notation\n"
msgstr " -i, --ip             以数字和点的形式显示 IP 号\n"

#: login-utils/last.c:581
msgid " -n, --limit <number> how many lines to show\n"
msgstr " -n, --limit <数字>   要显示的行数\n"

#: login-utils/last.c:582
msgid " -R, --nohostname     don't display the hostname field\n"
msgstr " -R, --nohostname     不显示主机名字段\n"

#: login-utils/last.c:583
msgid " -s, --since <time>   display the lines since the specified time\n"
msgstr " -s, --since <时间>   显示从指定时间起的行\n"

#: login-utils/last.c:584
msgid " -t, --until <time>   display the lines until the specified time\n"
msgstr " -t, --until <时间>   显示到指定时间为止的行\n"

#: login-utils/last.c:585
msgid " -p, --present <time> display who were present at the specified time\n"
msgstr " -p, --present <时间> 显示在指定时间谁在场(present)\n"

#: login-utils/last.c:586
msgid " -w, --fullnames      display full user and domain names\n"
msgstr " -w, --fullnames      显示完整的用户名和域名\n"

#: login-utils/last.c:587
msgid " -x, --system         display system shutdown entries and run level changes\n"
msgstr " -x, --system         显示系统关机项和运行级别更改\n"

#: login-utils/last.c:588
msgid ""
"     --time-format <format>  show timestamps in the specified <format>:\n"
"                               notime|short|full|iso\n"
msgstr ""
"     --time-format <格式>    以指定<格式>显示时间戳：\n"
"                               notime|short|full|iso\n"

#: login-utils/last.c:902
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "%s begins %s"
msgid ""
"\n"
"%s begins %s\n"
msgstr ""
"\n"
"%s 开始 %s"

#: login-utils/last.c:1011 term-utils/scriptlive.c:85
#: term-utils/scriptlive.c:89 term-utils/scriptreplay.c:80
#: term-utils/scriptreplay.c:84 text-utils/more.c:285 text-utils/more.c:291
msgid "failed to parse number"
msgstr "解析数字失败"

#: login-utils/last.c:1032 login-utils/last.c:1037 login-utils/last.c:1042
#: sys-utils/dmesg.c:1560 sys-utils/dmesg.c:1566 sys-utils/rtcwake.c:511
#, c-format
msgid "invalid time value \"%s\""
msgstr "无效的时间值\"%s\""

#: login-utils/libuser.c:29 login-utils/libuser.c:31
msgid "Couldn't drop group privileges"
msgstr "无法丢弃(drop)组优先级"

#: login-utils/libuser.c:47
#, c-format
msgid "libuser initialization failed: %s."
msgstr "libuser 初始化失败：%s。"

#: login-utils/libuser.c:52
msgid "changing user attribute failed"
msgstr "更改用户属性失败"

#: login-utils/libuser.c:66
#, c-format
msgid "user attribute not changed: %s"
msgstr "用户属性未更改：%s"

#: login-utils/login.c:417
#, c-format
msgid "You have new mail.\n"
msgstr "有您的新邮件。\n"

#: login-utils/login.c:419
#, c-format
msgid "You have mail.\n"
msgstr "有您的邮件。\n"

#: login-utils/login.c:442
#, c-format
msgid "FATAL: can't reopen tty: %m"
msgstr "致命：无法重新打开 tty：%m"

#: login-utils/login.c:448
#, c-format
msgid "FATAL: %s is not a terminal"
msgstr "致命：%s 不是终端"

#: login-utils/login.c:467
#, fuzzy, c-format
#| msgid "chown (%s, %lu, %lu) failed: %m"
msgid "chown (%s, %u, %u) failed: %m"
msgstr "chown (%s, %lu, %lu) 失败：%m"

#: login-utils/login.c:472
#, c-format
msgid "chmod (%s, %u) failed: %m"
msgstr "chmod (%s, %u) 失败：%m"

#: login-utils/login.c:535
msgid "FATAL: bad tty"
msgstr "致命：坏的 tty"

#: login-utils/login.c:551
#, c-format
msgid "TIOCGWINSZ ioctl failed: %m"
msgstr "TIOCGWINSZ ioctl 失败: %m"

#: login-utils/login.c:559
#, c-format
msgid "FATAL: %s: change permissions failed: %m"
msgstr "致命：%s：更改权限失败：%m"

#: login-utils/login.c:588
#, c-format
msgid "TIOCSWINSZ ioctl failed: %m"
msgstr "TIOCSWINSZ ioctl 失败: %m"

#: login-utils/login.c:694
#, c-format
msgid "Last login: %.*s "
msgstr "上次登录：%.*s "

#: login-utils/login.c:698
#, c-format
msgid "from %s\n"
msgstr "来自 %s\n"

#: login-utils/login.c:701
#, c-format
msgid "on %s\n"
msgstr "于 %s\n"

#: login-utils/login.c:717
msgid "write lastlog failed"
msgstr "写 lastlog 失败"

#: login-utils/login.c:808
#, c-format
msgid "DIALUP AT %s BY %s"
msgstr "DIALUP AT %s BY %s"

#: login-utils/login.c:813
#, c-format
msgid "ROOT LOGIN ON %s FROM %s"
msgstr "ROOT LOGIN ON %s FROM %s"

#: login-utils/login.c:816
#, c-format
msgid "ROOT LOGIN ON %s"
msgstr "ROOT LOGIN ON %s"

#: login-utils/login.c:819
#, c-format
msgid "LOGIN ON %s BY %s FROM %s"
msgstr "LOGIN ON %s BY %s FROM %s"

#: login-utils/login.c:822
#, c-format
msgid "LOGIN ON %s BY %s"
msgstr "LOGIN ON %s BY %s"

#: login-utils/login.c:857
msgid "login: "
msgstr "登录："

#: login-utils/login.c:893
#, c-format
msgid "PAM failure, aborting: %s"
msgstr "PAM 失败，将中止：%s"

#: login-utils/login.c:894
#, c-format
msgid "Couldn't initialize PAM: %s"
msgstr "无法初始化 PAM：%s"

#: login-utils/login.c:967
#, c-format
msgid "FAILED LOGIN %u FROM %s FOR %s, %s"
msgstr "FAILED LOGIN %u FROM %s FOR %s, %s"

#: login-utils/login.c:977 login-utils/sulogin.c:1101
#, c-format
msgid ""
"Login incorrect\n"
"\n"
msgstr ""
"登录不正确\n"
"\n"

#: login-utils/login.c:979
#, c-format
msgid ""
"Password incorrect\n"
"\n"
msgstr ""
"密码不正确\n"
"\n"

#: login-utils/login.c:993
#, c-format
msgid "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"
msgstr "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"

#: login-utils/login.c:999
#, c-format
msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
msgstr "FAILED LOGIN SESSION FROM %s FOR %s, %s"

#: login-utils/login.c:1007
#, c-format
msgid ""
"\n"
"Login incorrect\n"
msgstr ""
"\n"
"登录不正确\n"

#: login-utils/login.c:1034 login-utils/login.c:1421 login-utils/login.c:1447
msgid ""
"\n"
"Session setup problem, abort."
msgstr ""
"\n"
"会话设置问题，中止。"

#: login-utils/login.c:1035
msgid "NULL user name. Abort."
msgstr "空（NULL）用户名。中止。"

#: login-utils/login.c:1173
#, c-format
msgid "TIOCSCTTY failed: %m"
msgstr "TIOCSCTTY 失败：%m"

#: login-utils/login.c:1275
#, c-format
msgid " %s [-p] [-h <host>] [-H] [[-f] <username>]\n"
msgstr "%s [-p] [-h <主机>] [-H] [[-f] <用户名>]\n"

#: login-utils/login.c:1277
msgid "Begin a session on the system.\n"
msgstr "在此系统上开始一次会话。\n"

#: login-utils/login.c:1280
msgid " -p             do not destroy the environment"
msgstr " -p             不要清空环境信息"

#: login-utils/login.c:1281
msgid " -f             skip a login authentication"
msgstr " -f             跳过登录认证"

#: login-utils/login.c:1282
msgid " -h <host>      hostname to be used for utmp logging"
msgstr ""

#: login-utils/login.c:1283
msgid " -H             suppress hostname in the login prompt"
msgstr " -H             在登录提示符中不显示主机名"

#. TRANSLATORS: The standard value for %u is 60.
#: login-utils/login.c:1307
#, c-format
msgid "%s: timed out after %u seconds"
msgstr "%s：%u 秒后超时"

#: login-utils/login.c:1334
#, c-format
msgid "login: -h is for superuser only\n"
msgstr "login：-h 是超级用户专用选项\n"

#: login-utils/login.c:1422
#, c-format
msgid "Invalid user name \"%s\". Abort."
msgstr "无效的用户名“%s”。中止。"

#: login-utils/login.c:1446
#, c-format
msgid "groups initialization failed: %m"
msgstr "组初始化失败：%m"

#: login-utils/login.c:1474
msgid "setgid() failed"
msgstr "setgid() 失败"

#: login-utils/login.c:1498
msgid "setuid() failed"
msgstr "setuid() 失败"

#: login-utils/login.c:1504 login-utils/sulogin.c:801
#, c-format
msgid "%s: change directory failed"
msgstr "%s：更改目录失败"

#: login-utils/login.c:1511 login-utils/sulogin.c:802
#, c-format
msgid "Logging in with home = \"/\".\n"
msgstr "以 home = “/” 登录。\n"

#: login-utils/login.c:1542
msgid "couldn't exec shell script"
msgstr "无法执行(exec) shell 脚本"

#: login-utils/login.c:1544
msgid "no shell"
msgstr "无 shell"

#: login-utils/lslogins.c:218 sys-utils/lscpu.c:339 sys-utils/lsmem.c:266
msgid "no"
msgstr "否"

#: login-utils/lslogins.c:227 misc-utils/lsblk.c:199
msgid "user name"
msgstr "用户名"

#: login-utils/lslogins.c:227
msgid "Username"
msgstr "用户名"

#: login-utils/lslogins.c:228 sys-utils/renice.c:54
msgid "user ID"
msgstr "用户 ID"

#: login-utils/lslogins.c:229
#, fuzzy
#| msgid "password not required"
msgid "password not defined"
msgstr "无需密码"

#: login-utils/lslogins.c:229
#, fuzzy
#| msgid "Password not required"
msgid "Password not required (empty)"
msgstr "无需密码"

#: login-utils/lslogins.c:230
msgid "login by password disabled"
msgstr "已禁止使用密码登录"

#: login-utils/lslogins.c:230
msgid "Login by password disabled"
msgstr "已禁止使用密码登录"

#: login-utils/lslogins.c:231
msgid "password defined, but locked"
msgstr "定义了密码，但已锁定"

#: login-utils/lslogins.c:231
msgid "Password is locked"
msgstr "密码已锁定"

#: login-utils/lslogins.c:232
msgid "password encryption method"
msgstr "密码加密方式"

#: login-utils/lslogins.c:232
msgid "Password encryption method"
msgstr "密码加密方式"

#: login-utils/lslogins.c:233
msgid "log in disabled by nologin(8) or pam_nologin(8)"
msgstr "nologin(8) 或 pam_nologin(8) 禁止了登录"

#: login-utils/lslogins.c:233
msgid "No login"
msgstr "不能登录"

#: login-utils/lslogins.c:234
msgid "primary group name"
msgstr "主组名"

#: login-utils/lslogins.c:234
msgid "Primary group"
msgstr "主组"

#: login-utils/lslogins.c:235
msgid "primary group ID"
msgstr "主组 ID"

#: login-utils/lslogins.c:236
msgid "supplementary group names"
msgstr "附属组名"

#: login-utils/lslogins.c:236
msgid "Supplementary groups"
msgstr "附属组"

#: login-utils/lslogins.c:237
msgid "supplementary group IDs"
msgstr "附属组 ID"

#: login-utils/lslogins.c:237
msgid "Supplementary group IDs"
msgstr "附属组 ID"

#: login-utils/lslogins.c:238
msgid "home directory"
msgstr "主目录"

#: login-utils/lslogins.c:238
msgid "Home directory"
msgstr "主目录"

#: login-utils/lslogins.c:239
msgid "login shell"
msgstr "登录 shell"

#: login-utils/lslogins.c:239
msgid "Shell"
msgstr "Shell"

#: login-utils/lslogins.c:240
msgid "full user name"
msgstr "完整用户名"

#: login-utils/lslogins.c:240
msgid "Gecos field"
msgstr "Gecos 字段"

#: login-utils/lslogins.c:241
msgid "date of last login"
msgstr "上次登录日期"

#: login-utils/lslogins.c:241
msgid "Last login"
msgstr "上次登录"

#: login-utils/lslogins.c:242
msgid "last tty used"
msgstr "上次使用的终端"

#: login-utils/lslogins.c:242
msgid "Last terminal"
msgstr "上次的终端"

#: login-utils/lslogins.c:243
msgid "hostname during the last session"
msgstr "上次会话时的主机名(hostname)"

#: login-utils/lslogins.c:243
msgid "Last hostname"
msgstr "上次的主机名"

#: login-utils/lslogins.c:244
msgid "date of last failed login"
msgstr "上次登录失败的日期"

#: login-utils/lslogins.c:244
msgid "Failed login"
msgstr "失败的登录"

#: login-utils/lslogins.c:245
msgid "where did the login fail?"
msgstr "登录在哪里失败的？"

#: login-utils/lslogins.c:245
msgid "Failed login terminal"
msgstr "登录终端失败"

#: login-utils/lslogins.c:246
msgid "user's hush settings"
msgstr "用户的静默(hush)设置"

#: login-utils/lslogins.c:246
msgid "Hushed"
msgstr "已静默"

#: login-utils/lslogins.c:247
msgid "days user is warned of password expiration"
msgstr "警告用户密码过期的天数"

#: login-utils/lslogins.c:247
msgid "Password expiration warn interval"
msgstr "密码过期警告的间隔"

#: login-utils/lslogins.c:248
msgid "password expiration date"
msgstr "密码过期日"

#: login-utils/lslogins.c:248
msgid "Password expiration"
msgstr "密码过期"

#: login-utils/lslogins.c:249
msgid "date of last password change"
msgstr "上次更改密码的日期"

#: login-utils/lslogins.c:249
msgid "Password changed"
msgstr "密码已更改"

#: login-utils/lslogins.c:250
msgid "number of days required between changes"
msgstr "更改密码的限期(天)"

#: login-utils/lslogins.c:250
msgid "Minimum change time"
msgstr "最小更改时间"

#: login-utils/lslogins.c:251
msgid "max number of days a password may remain unchanged"
msgstr "密码可以多久不更改(天数)"

#: login-utils/lslogins.c:251
msgid "Maximum change time"
msgstr "最大更改时间"

#: login-utils/lslogins.c:252
msgid "the user's security context"
msgstr "用户的安全环境(context)"

#: login-utils/lslogins.c:252
msgid "Selinux context"
msgstr "Selinux 环境"

#: login-utils/lslogins.c:253
msgid "number of processes run by the user"
msgstr "用户运行的进程数"

#: login-utils/lslogins.c:253
msgid "Running processes"
msgstr "运行中的进程"

#: login-utils/lslogins.c:303 misc-utils/findmnt.c:142 misc-utils/lsblk.c:255
#: sys-utils/lsipc.c:205 sys-utils/lsmem.c:145
#, c-format
msgid "too many columns specified, the limit is %zu columns"
msgstr "指定了过多的列，限制是 %zu 列"

#: login-utils/lslogins.c:357 sys-utils/lsipc.c:472
msgid "unsupported time type"
msgstr "不支持的时间类型"

#: login-utils/lslogins.c:361
msgid "failed to compose time string"
msgstr "生成时间字符串失败"

#: login-utils/lslogins.c:783
msgid "failed to get supplementary groups"
msgstr "获得附属组失败"

#: login-utils/lslogins.c:1093
#, c-format
msgid "cannot found '%s'"
msgstr "无法找到“%s”"

#: login-utils/lslogins.c:1273
msgid "internal error: unknown column"
msgstr "内部错误：未知的列"

#: login-utils/lslogins.c:1381
#, c-format
msgid ""
"\n"
"Last logs:\n"
msgstr ""
"\n"
"上次的日志：\n"

#: login-utils/lslogins.c:1445
msgid "Display information about known users in the system.\n"
msgstr "显示系统中已知用户的信息。\n"

#: login-utils/lslogins.c:1448
msgid " -a, --acc-expiration     display info about passwords expiration\n"
msgstr " -a, --acc-expiration     显示关于密码过期的信息\n"

#: login-utils/lslogins.c:1449
msgid " -c, --colon-separate     display data in a format similar to /etc/passwd\n"
msgstr " -c, --colon-separate     以与 /etc/passwd 相似的格式显示日期\n"

#: login-utils/lslogins.c:1450 sys-utils/lsipc.c:311
msgid " -e, --export             display in an export-able output format\n"
msgstr " -e, --export             以可导出的格式显示\n"

#: login-utils/lslogins.c:1451
msgid " -f, --failed             display data about the users' last failed logins\n"
msgstr " -f, --failed             显示有关该用户上次登录失败的数据\n"

#: login-utils/lslogins.c:1452
msgid " -G, --supp-groups        display information about groups\n"
msgstr " -G, --supp-groups        显示与组相关的信息\n"

#: login-utils/lslogins.c:1453
msgid " -g, --groups=<groups>    display users belonging to a group in <groups>\n"
msgstr " -g, --groups=<groups>    显示属于<groups>中的组的用户\n"

#: login-utils/lslogins.c:1454
msgid " -L, --last               show info about the users' last login sessions\n"
msgstr " -L, --last               显示关于该用户上次登录会话的信息\n"

#: login-utils/lslogins.c:1455
msgid " -l, --logins=<logins>    display only users from <logins>\n"
msgstr " -l, --logins=<登录方式>  只显示以指定<登录方式>登录的用户\n"

#: login-utils/lslogins.c:1456 sys-utils/lsipc.c:313
msgid " -n, --newline            display each piece of information on a new line\n"
msgstr " -n, --newline            逐行显示每一部分信息\n"

#: login-utils/lslogins.c:1457 sys-utils/lsipc.c:306
msgid "     --noheadings         don't print headings\n"
msgstr "      --noheadings     不打印标题\n"

#: login-utils/lslogins.c:1458 sys-utils/lsipc.c:307
msgid "     --notruncate         don't truncate output\n"
msgstr "     --notruncate         不截断输出\n"

#: login-utils/lslogins.c:1459 sys-utils/lsipc.c:315
msgid " -o, --output[=<list>]    define the columns to output\n"
msgstr " -o, --output[=<列表>]    定义要输出的列\n"

#: login-utils/lslogins.c:1460
msgid "     --output-all         output all columns\n"
msgstr "     --output-all         输出所有列\n"

#: login-utils/lslogins.c:1461
msgid " -p, --pwd                display information related to login by password.\n"
msgstr " -p, --pwd                显示与 用密码登录 相关的信息。\n"

#: login-utils/lslogins.c:1462 sys-utils/lsipc.c:317
msgid " -r, --raw                display in raw mode\n"
msgstr " -r, --raw                以原始方式显示\n"

#: login-utils/lslogins.c:1463
msgid " -s, --system-accs        display system accounts\n"
msgstr " -s, --system-accs        显示系统帐户\n"

#: login-utils/lslogins.c:1464 sys-utils/lsipc.c:308
msgid "     --time-format=<type> display dates in short, full or iso format\n"
msgstr "     --time-format=<格式>  以短、长或 iso 格式显示日期\n"

#: login-utils/lslogins.c:1465
msgid " -u, --user-accs          display user accounts\n"
msgstr " -u, --user-accs          显示用户帐户\n"

#: login-utils/lslogins.c:1466 sys-utils/lsipc.c:319
msgid " -y, --shell              use column names to be usable as shell variable identifiers\n"
msgstr ""

#: login-utils/lslogins.c:1467
msgid " -Z, --context            display SELinux contexts\n"
msgstr " -Z, --context            显示 SELinux 环境\n"

#: login-utils/lslogins.c:1468
msgid " -z, --print0             delimit user entries with a nul character\n"
msgstr " -z, --print0             用空字符(nul)分隔用户记录项\n"

#: login-utils/lslogins.c:1469
msgid "     --wtmp-file <path>   set an alternate path for wtmp\n"
msgstr "     --wtmp-file <路径>   设置 wtmp 的可选路径\n"

#: login-utils/lslogins.c:1470
msgid "     --btmp-file <path>   set an alternate path for btmp\n"
msgstr "     --btmp-file <路径>   设置 btmp 的可选路径\n"

#: login-utils/lslogins.c:1471
msgid "     --lastlog <path>     set an alternate path for lastlog\n"
msgstr "     --lastlog <路径>     设置 lastlog 的可选路径\n"

#: login-utils/lslogins.c:1664
msgid "failed to request selinux state"
msgstr "请求 selinux 状态失败"

#: login-utils/lslogins.c:1678 login-utils/lslogins.c:1683
msgid "Only one user may be specified. Use -l for multiple users."
msgstr "只能指定一个用户。多用户请使用 -l。"

#: login-utils/newgrp.c:49 login-utils/newgrp.c:55
msgid "could not set terminal attributes"
msgstr "无法设置终端属性"

#: login-utils/newgrp.c:57
msgid "getline() failed"
msgstr "getline() 失败"

#: login-utils/newgrp.c:150
msgid "Password: "
msgstr "密码："

#: login-utils/newgrp.c:160 login-utils/sulogin.c:1083
msgid "crypt failed"
msgstr "crypt 失败"

#: login-utils/newgrp.c:175
#, c-format
msgid " %s <group>\n"
msgstr " %s <组>\n"

#: login-utils/newgrp.c:178
msgid "Log in to a new group.\n"
msgstr "以新的组登录。\n"

#: login-utils/newgrp.c:214
msgid "who are you?"
msgstr "您是哪位？"

#: login-utils/newgrp.c:218 login-utils/newgrp.c:230 sys-utils/nsenter.c:567
#: sys-utils/unshare.c:1087
msgid "setgid failed"
msgstr "setgid 失败"

#: login-utils/newgrp.c:223 login-utils/newgrp.c:225
msgid "no such group"
msgstr "无此组"

#: login-utils/newgrp.c:234 sys-utils/nsenter.c:569 sys-utils/unshare.c:1090
msgid "setuid failed"
msgstr "setuid 失败"

#: login-utils/nologin.c:28 misc-utils/lsfd.c:1538 misc-utils/lslocks.c:545
#: misc-utils/mcookie.c:83 misc-utils/uuidd.c:97 misc-utils/uuidgen.c:26
#: sys-utils/dmesg.c:276 sys-utils/ipcmk.c:67 sys-utils/irqtop.c:262
#: sys-utils/lscpu.c:1177 sys-utils/lsipc.c:292 sys-utils/lsirq.c:57
#: sys-utils/lsmem.c:519 sys-utils/readprofile.c:106 sys-utils/rtcwake.c:99
#: term-utils/scriptlive.c:57 term-utils/scriptreplay.c:47
#: term-utils/setterm.c:381 text-utils/line.c:31
#, c-format
msgid " %s [options]\n"
msgstr " %s [选项]\n"

#: login-utils/nologin.c:31
msgid "Politely refuse a login.\n"
msgstr "客气的拒绝登录。\n"

#: login-utils/nologin.c:34
msgid " -c, --command <command>  does nothing (for compatibility with su -c)\n"
msgstr " -c, --command <命令>     无操作（用于保持与 su -c 的兼容性）\n"

#: login-utils/nologin.c:109
#, c-format
msgid "This account is currently not available.\n"
msgstr "此帐户目前不可用。\n"

#: login-utils/su-common.c:233
msgid " (core dumped)"
msgstr " (核心已转储)"

#: login-utils/su-common.c:281
msgid "change owner or mode for pseudo-terminal failed"
msgstr ""

#: login-utils/su-common.c:375
msgid "failed to modify environment"
msgstr "修改环境失败"

#: login-utils/su-common.c:411
msgid "may not be used by non-root users"
msgstr "非 root 用户不能使用"

#: login-utils/su-common.c:435
msgid "authentication failed"
msgstr "验证失败"

#: login-utils/su-common.c:448
#, c-format
msgid "cannot open session: %s"
msgstr "无法打开会话：%s"

#: login-utils/su-common.c:467
msgid "cannot block signals"
msgstr "无法阻塞信号"

#: login-utils/su-common.c:484
msgid "cannot initialize signal mask for session"
msgstr ""

#: login-utils/su-common.c:492
#, fuzzy
#| msgid "cannot block signals"
msgid "cannot initialize signal mask"
msgstr "无法阻塞信号"

#: login-utils/su-common.c:502
#, fuzzy
#| msgid "cannot set signal handler"
msgid "cannot set signal handler for session"
msgstr "无法设置信号处理函数"

#: login-utils/su-common.c:510 misc-utils/uuidd.c:439
#: sys-utils/lscpu-virt.c:489
msgid "cannot set signal handler"
msgstr "无法设置信号处理函数"

#: login-utils/su-common.c:518
#, fuzzy
#| msgid "cannot set signal handler"
msgid "cannot set signal mask"
msgstr "无法设置信号处理函数"

#: login-utils/su-common.c:545 term-utils/script.c:961
#: term-utils/scriptlive.c:296
msgid "failed to create pseudo-terminal"
msgstr "创建伪终端失败"

#: login-utils/su-common.c:547 term-utils/script.c:968
#: term-utils/scriptlive.c:298
#, fuzzy
#| msgid "%s: failed to initialize sysfs handler"
msgid "failed to initialize signals handler"
msgstr "%s：初始化 sysfs 处理函数失败"

#: login-utils/su-common.c:562
#, fuzzy
#| msgid "cannot set signal handler"
msgid "cannot set child signal handler"
msgstr "无法设置信号处理函数"

#: login-utils/su-common.c:572 term-utils/script.c:977
#: term-utils/scriptlive.c:305
msgid "cannot create child process"
msgstr "无法创建子进程"

#: login-utils/su-common.c:591 sys-utils/nsenter.c:510
#: sys-utils/switch_root.c:189
#, c-format
msgid "cannot change directory to %s"
msgstr "无法更改到 %s 目录"

#: login-utils/su-common.c:617 term-utils/scriptlive.c:354
#, c-format
msgid ""
"\n"
"Session terminated, killing shell..."
msgstr ""
"\n"
"会话已终止，正在杀死 shell..."

#: login-utils/su-common.c:628
#, c-format
msgid " ...killed.\n"
msgstr " ...已杀死。\n"

#: login-utils/su-common.c:725
msgid "failed to set the PATH environment variable"
msgstr "设置 PATH 环境变量失败"

#: login-utils/su-common.c:802
msgid "cannot set groups"
msgstr "无法设置 组"

#: login-utils/su-common.c:808
#, fuzzy, c-format
#| msgid "failed to parse level '%s'"
msgid "failed to establish user credentials: %s"
msgstr "解析级别“%s”失败"

#: login-utils/su-common.c:818
msgid "cannot set group id"
msgstr "无法设置 组 id"

#: login-utils/su-common.c:820
msgid "cannot set user id"
msgstr "无法设置 用户 id"

#: login-utils/su-common.c:884
msgid " -m, -p, --preserve-environment      do not reset environment variables\n"
msgstr " -m, -p, --preserve-environment      不重置环境变量\n"

#: login-utils/su-common.c:885
#, fuzzy
#| msgid " -m, -p, --preserve-environment  do not reset environment variables\n"
msgid " -w, --whitelist-environment <list>  don't reset specified variables\n"
msgstr " -m, -p, --preserve-environment  不重置环境变量\n"

#: login-utils/su-common.c:888
msgid " -g, --group <group>             specify the primary group\n"
msgstr " -g, --group <组>                指定主组\n"

#: login-utils/su-common.c:889
#, fuzzy
#| msgid ""
#| " -G, --supp-group <group>        specify a supplemental group\n"
#| "\n"
msgid " -G, --supp-group <group>        specify a supplemental group\n"
msgstr ""
" -G, --supp-group <组>        指定一个辅助组\n"
"\n"

#: login-utils/su-common.c:892
msgid " -, -l, --login                  make the shell a login shell\n"
msgstr " -, -l, --login                  使 shell 成为登录 shell\n"

#: login-utils/su-common.c:893
msgid " -c, --command <command>         pass a single command to the shell with -c\n"
msgstr " -c, --command <命令>            使用 -c 向 shell 传递一条命令\n"

#: login-utils/su-common.c:894
msgid ""
" --session-command <command>     pass a single command to the shell with -c\n"
"                                   and do not create a new session\n"
msgstr ""
" --session-command <命令>        使用 -c 向 shell 传递一条命令\n"
"                                   而不创建新会话\n"

#: login-utils/su-common.c:896
msgid " -f, --fast                      pass -f to the shell (for csh or tcsh)\n"
msgstr " -f, --fast                      向shell 传递 -f 选项(csh 或 tcsh)\n"

#: login-utils/su-common.c:897
msgid " -s, --shell <shell>             run <shell> if /etc/shells allows it\n"
msgstr " -s, --shell <shell>             若 /etc/shells 允许，运行<shell>\n"

#: login-utils/su-common.c:898
msgid " -P, --pty                       create a new pseudo-terminal\n"
msgstr ""

#: login-utils/su-common.c:908
#, fuzzy, c-format
#| msgid ""
#| " %1$s [options] <dev> [[-N] <part>]\n"
#| " %1$s [options] <command>\n"
msgid ""
" %1$s [options] -u <user> [[--] <command>]\n"
" %1$s [options] [-] [<user> [<argument>...]]\n"
msgstr ""
" %1$s [选项] <设备> [[-N] <分区>]\n"
" %1$s [选项] <命令>\n"

#: login-utils/su-common.c:913
#, fuzzy
#| msgid ""
#| "\n"
#| "Run <command> with the effective user ID and group ID of <user>.  If -u is\n"
#| "not given, fall back to su(1)-compatible semantics and execute standard shell.\n"
#| "The options -c, -f, -l, and -s are mutually exclusive with -u.\n"
msgid ""
"Run <command> with the effective user ID and group ID of <user>.  If -u is\n"
"not given, fall back to su(1)-compatible semantics and execute standard shell.\n"
"The options -c, -f, -l, and -s are mutually exclusive with -u.\n"
msgstr ""
"\n"
"以<用户>的有效用户 id 和组 id 运行<命令>。如果未给出 -u，\n"
"将退而使用与 su(1) 兼容的语法并执行标准 shell。\n"
"选项 -c、-f、-l 及 -s 与 -u 相互排斥。\n"

#: login-utils/su-common.c:918
msgid " -u, --user <user>               username\n"
msgstr " -u, --user <用户>               用户名\n"

#: login-utils/su-common.c:929
#, c-format
msgid " %s [options] [-] [<user> [<argument>...]]\n"
msgstr " %s [选项] [-] [<用户> [<参数>...]]\n"

#: login-utils/su-common.c:933
#, fuzzy
#| msgid ""
#| "\n"
#| "Change the effective user ID and group ID to that of <user>.\n"
#| "A mere - implies -l.  If <user> is not given, root is assumed.\n"
msgid ""
"Change the effective user ID and group ID to that of <user>.\n"
"A mere - implies -l.  If <user> is not given, root is assumed.\n"
msgstr ""
"\n"
"将有效用户 id 和组 id 更改为<用户>的 id。\n"
"单个 - 视为 -l。如果未指定<用户>，将假定为 root。\n"

#: login-utils/su-common.c:1010
#, c-format
msgid "specifying more than %d supplemental group is not possible"
msgid_plural "specifying more than %d supplemental groups is not possible"
msgstr[0] "不能指定多于 %d 个补充组"

#: login-utils/su-common.c:1016
#, c-format
msgid "group %s does not exist"
msgstr "组 %s 不存在"

#: login-utils/su-common.c:1125
msgid "--pty is not supported for your system"
msgstr "--pty 在您的系统上不受支持"

#: login-utils/su-common.c:1159
msgid "ignoring --preserve-environment, it's mutually exclusive with --login"
msgstr "将忽略 --preserve-environment，它与 --login 互斥。"

#: login-utils/su-common.c:1173
msgid "options --{shell,fast,command,session-command,login} and --user are mutually exclusive"
msgstr "选项 --{shell,fast,command,session-command,login} 和 --user 互斥"

#: login-utils/su-common.c:1176
msgid "no command was specified"
msgstr "没有指定命令"

#: login-utils/su-common.c:1188
msgid "only root can specify alternative groups"
msgstr "只有 root 用户能指定替代组"

#: login-utils/su-common.c:1199
#, c-format
msgid "user %s does not exist or the user entry does not contain all the required fields"
msgstr ""

#: login-utils/su-common.c:1234
#, c-format
msgid "using restricted shell %s"
msgstr "将使用受限 shell %s"

#: login-utils/su-common.c:1255
msgid "failed to allocate pty handler"
msgstr ""

#: login-utils/su-common.c:1281
#, c-format
msgid "warning: cannot change directory to %s"
msgstr "警告：无法更改到 %s 目录"

#: login-utils/sulogin.c:173 login-utils/sulogin.c:176
#, c-format
msgid "tcgetattr failed"
msgstr "tcgetattr 失败"

#: login-utils/sulogin.c:259
msgid "tcsetattr failed"
msgstr "tcsetattr 失败"

#: login-utils/sulogin.c:523
#, c-format
msgid "%s: no entry for root\n"
msgstr "%s：无 root 的记录\n"

#: login-utils/sulogin.c:550
#, c-format
msgid "%s: no entry for root"
msgstr "%s：无 root 的记录"

#: login-utils/sulogin.c:555
#, c-format
msgid "%s: root password garbled"
msgstr "%s：root 密码有误"

#: login-utils/sulogin.c:584
#, c-format
msgid ""
"\n"
"Cannot open access to console, the root account is locked.\n"
"See sulogin(8) man page for more details.\n"
"\n"
"Press Enter to continue.\n"
msgstr ""
"\n"
"无法访问终端，root 账号被锁。 \n"
"参阅 sulogin(8) 帮助页面了解更多信息。\n"
"\n"
"按 Enter 继续。\n"

#: login-utils/sulogin.c:590
#, c-format
msgid "Give root password for login: "
msgstr "指定 root 的登录密码："

#: login-utils/sulogin.c:592
#, c-format
msgid "Press Enter for login: "
msgstr "按 Enter 键登录："

#: login-utils/sulogin.c:595
#, c-format
msgid "Give root password for maintenance\n"
msgstr "指定 root 的维护密码\n"

#: login-utils/sulogin.c:597
#, c-format
msgid "Press Enter for maintenance\n"
msgstr "按 Enter 键进行维护\n"

#: login-utils/sulogin.c:598
#, c-format
msgid "(or press Control-D to continue): "
msgstr "(或按 Control-D 键继续)："

#: login-utils/sulogin.c:805
msgid "change directory to system root failed"
msgstr "更改到系统根目录失败"

#: login-utils/sulogin.c:855
msgid "setexeccon failed"
msgstr "setexeccon 失败"

#: login-utils/sulogin.c:876
#, c-format
msgid " %s [options] [tty device]\n"
msgstr " %s [选项] [tty 设备]\n"

#: login-utils/sulogin.c:879
msgid "Single-user login.\n"
msgstr "单用户登录。\n"

#: login-utils/sulogin.c:882
msgid ""
" -p, --login-shell        start a login shell\n"
" -t, --timeout <seconds>  max time to wait for a password (default: no limit)\n"
" -e, --force              examine password files directly if getpwnam(3) fails\n"
msgstr ""
" -p, --login-shell        启动登录 shell\n"
" -t, --timeout <秒数>     等待密码的最大时间(默认：无限制)\n"
" -e, --force              如果 getpwnam(3) 失败，直接检查密码文件\n"

#: login-utils/sulogin.c:938 misc-utils/findmnt.c:1619 sys-utils/wdctl.c:764
#: term-utils/agetty.c:860 term-utils/wall.c:219
msgid "invalid timeout argument"
msgstr "无效的 timeout 超时参数"

#: login-utils/sulogin.c:965
msgid "only superuser can run this program"
msgstr "只有超级用户能运行此程序"

#: login-utils/sulogin.c:1008
msgid "cannot open console"
msgstr "打不开终端"

#: login-utils/sulogin.c:1015
msgid "cannot open password database"
msgstr "无法打开密码数据库"

#: login-utils/sulogin.c:1098
#, c-format
msgid ""
"cannot execute su shell\n"
"\n"
msgstr ""
"无法执行 su shell\n"
"\n"

#: login-utils/sulogin.c:1105
msgid ""
"Timed out\n"
"\n"
msgstr ""
"超时\n"
"\n"

#: login-utils/sulogin.c:1137
msgid ""
"cannot wait on su shell\n"
"\n"
msgstr ""
"无法等待 su shell\n"
"\n"

#: login-utils/utmpdump.c:181
#, c-format
msgid "%s: cannot get file position"
msgstr "%s：无法获取文件位置"

#: login-utils/utmpdump.c:185
#, c-format
msgid "%s: cannot add inotify watch."
msgstr "%s：无法添加 inotify 观察。"

#: login-utils/utmpdump.c:194
#, c-format
msgid "%s: cannot read inotify events"
msgstr "%s：无法读 inotify 事件"

#: login-utils/utmpdump.c:254 login-utils/utmpdump.c:259
msgid "Extraneous newline in file. Exiting."
msgstr "文件中有无关的换行符。将退出。"

#: login-utils/utmpdump.c:318
#, c-format
msgid " %s [options] [filename]\n"
msgstr " %s [选项] [文件名]\n"

#: login-utils/utmpdump.c:321
msgid "Dump UTMP and WTMP files in raw format.\n"
msgstr "以原始格式转储 UTMP 和 WTMP 文件。\n"

#: login-utils/utmpdump.c:324
msgid " -f, --follow         output appended data as the file grows\n"
msgstr " -f, --follow         随文件增长输出追加的数据\n"

#: login-utils/utmpdump.c:325
msgid " -r, --reverse        write back dumped data into utmp file\n"
msgstr " -r, --reverse        将转储的数据写回 utmp 文件\n"

#: login-utils/utmpdump.c:326
msgid " -o, --output <file>  write to file instead of standard output\n"
msgstr " -o, --output <文件>  写入文件而非标准输出\n"

#: login-utils/utmpdump.c:394
msgid "following standard input is unsupported"
msgstr "不支持跟随(follow)标准输入"

#: login-utils/utmpdump.c:400
#, c-format
msgid "Utmp undump of %s\n"
msgstr "%s 的 Utmp undump\n"

#: login-utils/utmpdump.c:403
#, c-format
msgid "Utmp dump of %s\n"
msgstr "%s 的 Utmp dump\n"

#: login-utils/vipw.c:132
msgid "can't open temporary file"
msgstr "无法打开临时文件"

#: login-utils/vipw.c:152
#, c-format
msgid "%s: create a link to %s failed"
msgstr "%s：创建指向 %s 的链接失败"

#: login-utils/vipw.c:160
#, c-format
msgid "Can't get context for %s"
msgstr "无法获取 %s 的环境"

#: login-utils/vipw.c:166
#, c-format
msgid "Can't set context for %s"
msgstr "无法设置 %s 的环境"

#: login-utils/vipw.c:235
#, c-format
msgid "%s unchanged"
msgstr "%s 未改变"

#: login-utils/vipw.c:253
msgid "cannot get lock"
msgstr "无法获得锁"

#: login-utils/vipw.c:280
msgid "no changes made"
msgstr "无改变"

#: login-utils/vipw.c:289
msgid "cannot chmod file"
msgstr "无法对文件 chmod"

#: login-utils/vipw.c:304
msgid "Edit the password or group file.\n"
msgstr "编辑密码或组文件。\n"

#: login-utils/vipw.c:356
msgid "You are using shadow groups on this system.\n"
msgstr "您正在使用此系统上的遮蔽(shadow)组。\n"

#: login-utils/vipw.c:357
msgid "You are using shadow passwords on this system.\n"
msgstr "您正在使用此系统上的遮蔽(shadow)密码。\n"

#. TRANSLATORS: this program uses for y and n rpmatch(3),
#. * which means they can be translated.
#: login-utils/vipw.c:361
#, c-format
msgid "Would you like to edit %s now [y/n]? "
msgstr "您想现在编辑 %s 吗[y/n]？"

#: misc-utils/blkid.c:72
#, c-format
msgid ""
" %s --label <label> | --uuid <uuid>\n"
"\n"
msgstr ""

#: misc-utils/blkid.c:73
#, c-format
msgid ""
" %s [--cache-file <file>] [-ghlLv] [--output <format>] [--match-tag <tag>] \n"
"       [--match-token <token>] [<dev> ...]\n"
"\n"
msgstr ""

#: misc-utils/blkid.c:75
#, c-format
msgid ""
" %s -p [--match-tag <tag>] [--offset <offset>] [--size <size>] \n"
"       [--output <format>] <dev> ...\n"
"\n"
msgstr ""

#: misc-utils/blkid.c:77
#, c-format
msgid " %s -i [--match-tag <tag>] [--output <format>] <dev> ...\n"
msgstr ""

#: misc-utils/blkid.c:79
#, fuzzy
#| msgid ""
#| " -A, --adjfile <file>     specifies the path to the adjust file\n"
#| "                            the default is %s\n"
msgid ""
" -c, --cache-file <file>    read from <file> instead of reading from the default\n"
"                              cache file (-c /dev/null means no cache)\n"
msgstr ""
" -A, --adjfile <文件>     指定 adjust 文件的路径\n"
"                            默认为 %s\n"

#: misc-utils/blkid.c:81
#, fuzzy
#| msgid " -n, --noheadings          don't print headings\n"
msgid " -d, --no-encoding          don't encode non-printing characters\n"
msgstr " -n, --noheadings          不打印标题\n"

#: misc-utils/blkid.c:82
msgid " -g, --garbage-collect      garbage collect the blkid cache\n"
msgstr " -g, --garbage-collect      对 blkid 缓存进行垃圾回收\n"

#: misc-utils/blkid.c:83
msgid ""
" -o, --output <format>      output format; can be one of:\n"
"                              value, device, export or full; (default: full)\n"
msgstr ""

#: misc-utils/blkid.c:85
#, fuzzy
#| msgid " -l, --list-shells    print list of shells and exit\n"
msgid " -k, --list-filesystems     list all known filesystems/RAIDs and exit\n"
msgstr " -l, --list-shells    打印 shell 列表并退出\n"

#: misc-utils/blkid.c:86
msgid " -s, --match-tag <tag>      show specified tag(s) (default show all tags)\n"
msgstr ""

#: misc-utils/blkid.c:87
msgid " -t, --match-token <token>  find device with a specific token (NAME=value pair)\n"
msgstr ""

#: misc-utils/blkid.c:88
#, fuzzy
#| msgid " -l, --list                    list info about all or specified (default)\n"
msgid " -l, --list-one             look up only first device with token specified by -t\n"
msgstr " -l, --list                    列出所有或指定的信息(默认)\n"

#: misc-utils/blkid.c:89
#, fuzzy
#| msgid " -s, --size <size>         device size\n"
msgid " -L, --label <label>        convert LABEL to device name\n"
msgstr " -s, --size <尺寸>         设备尺寸\n"

#: misc-utils/blkid.c:90
msgid " -U, --uuid <uuid>          convert UUID to device name\n"
msgstr " -U, --uuid <uuid>          将 UUID 转换为设备名\n"

#: misc-utils/blkid.c:92
#, fuzzy
#| msgid "Scheduling options:\n"
msgid "Low-level probing options:\n"
msgstr "调度选项：\n"

#: misc-utils/blkid.c:93
#, fuzzy
#| msgid " -p, --pid                 unshare pid namespace\n"
msgid " -p, --probe                low-level superblocks probing (bypass cache)\n"
msgstr " -p, --pid                 取消共享 pid 名字空间\n"

#: misc-utils/blkid.c:94
#, fuzzy
#| msgid " -i, --info                print only info about the sampling step\n"
msgid " -i, --info                 gather information about I/O limits\n"
msgstr " -i, --info                只打印有关采样步骤(sampling step)的信息\n"

#: misc-utils/blkid.c:95
#, fuzzy
#| msgid " -P, --port <port>        use this port for UDP or TCP connection\n"
msgid " -H, --hint <value>         set hint for probing function\n"
msgstr " -P, --port <端口>        使用指定端口进行 UDP 或 TCP 连接\n"

#: misc-utils/blkid.c:96
#, fuzzy
#| msgid " -s, --size <size>         device size\n"
msgid " -S, --size <size>          overwrite device size\n"
msgstr " -s, --size <尺寸>         设备尺寸\n"

#: misc-utils/blkid.c:97
#, fuzzy
#| msgid " -H, --host <hostname>      specify login host\n"
msgid " -O, --offset <offset>      probe at the given offset\n"
msgstr " -H, --host <主机名>        指定登录主机\n"

#: misc-utils/blkid.c:98
#, fuzzy
#| msgid " -t, --types <list>      limit the set of filesystem types\n"
msgid " -u, --usages <list>        filter by \"usage\" (e.g. -u filesystem,raid)\n"
msgstr " -t, --types <列表>      限制文件系统集合\n"

#: misc-utils/blkid.c:99
#, fuzzy
#| msgid " -t, --types <list>      limit the set of filesystem types\n"
msgid " -n, --match-types <list>   filter by filesystem type (e.g. -n vfat,ext3)\n"
msgstr " -t, --types <列表>      限制文件系统集合\n"

#: misc-utils/blkid.c:100
msgid " -D, --no-part-details      don't print info from partition table\n"
msgstr " -D, --no-part-details      不要打印来自分区表的信息\n"

#: misc-utils/blkid.c:106
msgid "<size> and <offset>"
msgstr ""

#: misc-utils/blkid.c:108
#, fuzzy
#| msgid " <dev>                     device (usually disk) path\n"
msgid " <dev> specify device(s) to probe (default: all devices)\n"
msgstr " <设备>                    设备(通常是磁盘)的路径\n"

#: misc-utils/blkid.c:240
msgid "(mounted, mtpt unknown)"
msgstr ""

#: misc-utils/blkid.c:242
msgid "(in use)"
msgstr "（使用中）"

#: misc-utils/blkid.c:244
msgid "(not mounted)"
msgstr "（未挂载）"

#: misc-utils/blkid.c:518 misc-utils/blkid.c:524
#, c-format
msgid "error: %s"
msgstr "错误：%s"

#: misc-utils/blkid.c:567
#, c-format
msgid "%s: ambivalent result (probably more filesystems on the device, use wipefs(8) to see more details)"
msgstr ""

#: misc-utils/blkid.c:613
#, fuzzy, c-format
#| msgid "unknown argument: %s"
msgid "unknown keyword in -u <list> argument: '%s'"
msgstr "未知参数：%s"

#: misc-utils/blkid.c:630
msgid "error: -u <list> argument is empty"
msgstr ""

#: misc-utils/blkid.c:783
#, c-format
msgid "unsupported output format %s"
msgstr "不支持的输出格式：%s"

#: misc-utils/blkid.c:786 misc-utils/fadvise.c:119 misc-utils/wipefs.c:734
msgid "invalid offset argument"
msgstr "无效的 偏移 参数"

#: misc-utils/blkid.c:793
#, fuzzy
#| msgid "no command was specified"
msgid "Too many tags specified"
msgstr "没有指定命令"

#: misc-utils/blkid.c:799 misc-utils/pipesz.c:273
#, fuzzy
#| msgid "invalid time argument"
msgid "invalid size argument"
msgstr "无效的 时间 参数"

#: misc-utils/blkid.c:803
msgid "Can only search for one NAME=value pair"
msgstr ""

#: misc-utils/blkid.c:810
msgid "-t needs NAME=value pair"
msgstr ""

#: misc-utils/blkid.c:816
#, c-format
msgid "%s from %s  (libblkid %s, %s)\n"
msgstr "%s，来自 %s（libblkid %s，%s）\n"

#: misc-utils/blkid.c:889
msgid "The low-level probing mode does not support 'list' output format"
msgstr ""

#: misc-utils/blkid.c:902
msgid "The low-level probing mode requires a device"
msgstr ""

#: misc-utils/blkid.c:913
#, fuzzy, c-format
#| msgid "Failed to set personality to %s"
msgid "Failed to use probing hint: %s"
msgstr "无法将人格(personality)设置为 %s"

#: misc-utils/blkid.c:956
msgid "The lookup option requires a search type specified using -t"
msgstr ""

#: misc-utils/cal.c:403
msgid "invalid month argument"
msgstr "无效的月份参数"

#: misc-utils/cal.c:411
msgid "invalid week argument"
msgstr "无效的 周 参数"

#: misc-utils/cal.c:413
msgid "illegal week value: use 1-54"
msgstr "非法的 周 值：请使用 1-54"

#: misc-utils/cal.c:471
#, c-format
msgid "failed to parse timestamp or unknown month name: %s"
msgstr " 解析时间戳失败或月份名未知：%s"

#: misc-utils/cal.c:480
msgid "illegal day value"
msgstr "日 值不合法"

#: misc-utils/cal.c:482 misc-utils/cal.c:506
#, c-format
msgid "illegal day value: use 1-%d"
msgstr "日 值不合法：请使用 1-%d"

#: misc-utils/cal.c:486 misc-utils/cal.c:494
msgid "illegal month value: use 1-12"
msgstr "月份值不合法：请使用 1-12"

#: misc-utils/cal.c:490
#, c-format
msgid "unknown month name: %s"
msgstr "月份名未知：%s"

#: misc-utils/cal.c:497 misc-utils/cal.c:501
msgid "illegal year value"
msgstr "年份值不合法"

#: misc-utils/cal.c:499
msgid "illegal year value: use positive integer"
msgstr "年份值不合法：请使用正整数"

#: misc-utils/cal.c:535 misc-utils/cal.c:548
#, c-format
msgid "illegal week value: year %d doesn't have week %d"
msgstr "非法的 周 值：%d 年没有第 %d 周"

#: misc-utils/cal.c:1270
#, c-format
msgid " %s [options] [[[day] month] year]\n"
msgstr " %s [选项] [[[日] 月] 年]\n"

#: misc-utils/cal.c:1271
#, c-format
msgid " %s [options] <timestamp|monthname>\n"
msgstr " %s [选项] <时间戳|月份名>\n"

#: misc-utils/cal.c:1274
msgid "Display a calendar, or some part of it.\n"
msgstr "显示日历或部分日历。\n"

#: misc-utils/cal.c:1275
msgid "Without any arguments, display the current month.\n"
msgstr "不带参数时，显示当月日历。\n"

#: misc-utils/cal.c:1278
msgid " -1, --one             show only a single month (default)\n"
msgstr " -1, --one             只显示一个月(默认)\n"

#: misc-utils/cal.c:1279
msgid " -3, --three           show three months spanning the date\n"
msgstr " -3, --three           显示该日期前后三个月\n"

#: misc-utils/cal.c:1280
msgid " -n, --months <num>    show num months starting with date's month\n"
msgstr " -n, --months < 数字>   显示以日期所在月份开始的若干个月\n"

#: misc-utils/cal.c:1281
msgid " -S, --span            span the date when displaying multiple months\n"
msgstr " -S, --span            显示多个月份时的日期范围\n"

#: misc-utils/cal.c:1282
msgid " -s, --sunday          Sunday as first day of week\n"
msgstr " -s, --sunday          周日作为一周的第一天\n"

#: misc-utils/cal.c:1283
msgid " -m, --monday          Monday as first day of week\n"
msgstr " -m, --monday          周一作为一周的第一天\n"

#: misc-utils/cal.c:1284
#, fuzzy
#| msgid " -j, --julian          output Julian dates\n"
msgid " -j, --julian          use day-of-year for all calendars\n"
msgstr " -j, --julian          输出儒略日期\n"

#: misc-utils/cal.c:1285
msgid "     --reform <val>    Gregorian reform date (1752|gregorian|iso|julian)\n"
msgstr ""

#: misc-utils/cal.c:1286
msgid "     --iso             alias for --reform=iso\n"
msgstr "     --iso             --reform=iso 的别名\n"

#: misc-utils/cal.c:1287
msgid " -y, --year            show the whole year\n"
msgstr " -y, --year            显示全年\n"

#: misc-utils/cal.c:1288
msgid " -Y, --twelve          show the next twelve months\n"
msgstr " -Y, --twelve          显示之后的 12 个月\n"

#: misc-utils/cal.c:1289
msgid " -w, --week[=<num>]    show US or ISO-8601 week numbers\n"
msgstr " -w, --week[=<数字>]   显示美国或 ISO-8601 周数\n"

#: misc-utils/cal.c:1290
#, fuzzy
#| msgid " -y, --physical          print physical instead of logical IDs\n"
msgid " -v, --vertical        show day vertically instead of line\n"
msgstr " -y, --physical          打印物理 ID 而非逻辑 ID\n"

#: misc-utils/cal.c:1291
#, fuzzy
#| msgid " -o, --output <list>  define which output columns to use\n"
msgid " -c, --columns <width> amount of columns to use\n"
msgstr " -o, --output <列表>  定义使用哪个输出列\n"

#: misc-utils/cal.c:1293
#, fuzzy, c-format
#| msgid "     --color[=<when>]  colorize messages (auto, always or never)\n"
msgid "     --color[=<when>]  colorize messages (%s, %s or %s)\n"
msgstr "     --color[=<时机>]  消息彩色显示(auto, always 或 never)\n"

#: misc-utils/fadvise.c:49
#, c-format
msgid " %s [options] file\n"
msgstr " %s [选项] 文件\n"

#: misc-utils/fadvise.c:50
#, fuzzy, c-format
#| msgid " %s [options] file\n"
msgid " %s [options] --fd|-d file-descriptor\n"
msgstr " %s [选项] 文件\n"

#: misc-utils/fadvise.c:53
msgid " -a, --advice <advice> applying advice to the file (default: \"dontneed\")\n"
msgstr ""

#: misc-utils/fadvise.c:54
#, fuzzy
#| msgid " -l, --length <num>   length for range operations, in bytes\n"
msgid " -l, --length <num>    length for range operations, in bytes\n"
msgstr " -l, --length <数字>  范围操作的长度(字节数)\n"

#: misc-utils/fadvise.c:55
#, fuzzy
#| msgid " -o, --offset <num>   offset for range operations, in bytes\n"
msgid " -o, --offset <num>    offset for range operations, in bytes\n"
msgstr " -o, --offset <数字>  范围操作的偏移量(字节数)\n"

#: misc-utils/fadvise.c:60
#, fuzzy
#| msgid ""
#| "\n"
#| "Available columns (for --show):\n"
msgid ""
"\n"
"Available values for advice:\n"
msgstr ""
"\n"
"可用列(用于 --show)：\n"

#: misc-utils/fadvise.c:111 misc-utils/pipesz.c:263 misc-utils/pipesz.c:335
#, fuzzy
#| msgid "invalid speed argument"
msgid "invalid fd argument"
msgstr "无效的 速度 参数"

#: misc-utils/fadvise.c:131 misc-utils/fincore.c:339 sys-utils/losetup.c:828
msgid "no file specified"
msgstr "未指定文件"

#: misc-utils/fadvise.c:136
#, fuzzy
#| msgid "bad file descriptor"
msgid "specify either file descriptor or file name"
msgstr "错误的文件描述符"

#: misc-utils/fadvise.c:141
#, fuzzy
#| msgid "bad file descriptor"
msgid "specify one file descriptor or file name"
msgstr "错误的文件描述符"

#: misc-utils/fadvise.c:156
#, fuzzy, c-format
#| msgid "failed to read pipe"
msgid "failed to advise: %s"
msgstr "读取管道失败"

#: misc-utils/fincore.c:61
#, fuzzy
#| msgid "Shared memory pages"
msgid "file data resident in memory in pages"
msgstr "共享内存页"

#: misc-utils/fincore.c:62
msgid "file data resident in memory in bytes"
msgstr ""

#: misc-utils/fincore.c:63
msgid "size of the file"
msgstr "文件大小"

#: misc-utils/fincore.c:64
msgid "file name"
msgstr "文件名称"

#: misc-utils/fincore.c:174
#, fuzzy, c-format
#| msgid "failed to read symlink: %s"
msgid "failed to do mincore: %s"
msgstr "读符号链接失败：%s"

#: misc-utils/fincore.c:211
#, c-format
msgid "failed to do mmap: %s"
msgstr "进行 mmap 失败：%s"

#: misc-utils/fincore.c:237
#, c-format
msgid "failed to open: %s"
msgstr "打开失败：%s"

#: misc-utils/fincore.c:242
#, c-format
msgid "failed to do fstat: %s"
msgstr "进行 fstat 失败：%s"

#: misc-utils/fincore.c:263
#, c-format
msgid " %s [options] file...\n"
msgstr " %s [选项] 文件...\n"

#: misc-utils/fincore.c:266
msgid " -J, --json            use JSON output format\n"
msgstr " -J, --json            使用 JSON 输出格式\n"

#: misc-utils/fincore.c:267
#, fuzzy
#| msgid " -b, --bytes            print sizes in bytes rather than in human readable format\n"
msgid " -b, --bytes           print sizes in bytes rather than in human readable format\n"
msgstr " -b, --bytes           以字节为单位而非易读的格式来打印大小\n"

#: misc-utils/fincore.c:268
#, fuzzy
#| msgid " -n, --noheadings       don't print headings\n"
msgid " -n, --noheadings      don't print headings\n"
msgstr " -n, --noheadings       不打印标题\n"

#: misc-utils/fincore.c:269
#, fuzzy
#| msgid " -o, --output <list>  output columns\n"
msgid " -o, --output <list>   output columns\n"
msgstr " -o, --output <列表>  输出列\n"

#: misc-utils/fincore.c:270
msgid " -r, --raw             use raw output format\n"
msgstr " -r, --raw             使用原始输出格式\n"

#: misc-utils/findfs.c:28
#, c-format
msgid " %s [options] {LABEL,UUID,PARTUUID,PARTLABEL}=<value>\n"
msgstr " %s [选项] {LABEL,UUID,PARTUUID,PARTLABEL}=<值>\n"

#: misc-utils/findfs.c:32
msgid "Find a filesystem by label or UUID.\n"
msgstr "按标签或 UUID 查找文件系统。\n"

#: misc-utils/findfs.c:74
#, c-format
msgid "unable to resolve '%s'"
msgstr "不能解析“%s”"

#: misc-utils/findmnt.c:103
msgid "action detected by --poll"
msgstr "--poll 检测到的操作"

#: misc-utils/findmnt.c:104 misc-utils/lsblk.c:179
msgid "filesystem size available"
msgstr "文件系统可用大小"

#: misc-utils/findmnt.c:105
msgid "dump(8) period in days [fstab only]"
msgstr "dump(8) 周期(天数) [仅 fstab]"

#: misc-utils/findmnt.c:106
msgid "filesystem root"
msgstr "文件系统 root"

#: misc-utils/findmnt.c:107 misc-utils/lsblk.c:182
msgid "filesystem type"
msgstr "文件系统类型"

#: misc-utils/findmnt.c:108
msgid "FS specific mount options"
msgstr "FS 的特定挂载选项"

#: misc-utils/findmnt.c:109
msgid "mount ID"
msgstr "挂载 ID"

#: misc-utils/findmnt.c:110
msgid "filesystem label"
msgstr "文件系统标签"

#: misc-utils/findmnt.c:111 misc-utils/lsblk.c:192 misc-utils/lslocks.c:80
msgid "major:minor device number"
msgstr "主:次 设备号"

#: misc-utils/findmnt.c:112
msgid "old mount options saved by --poll"
msgstr "--poll 保存的旧挂载选项"

#: misc-utils/findmnt.c:113
msgid "old mountpoint saved by --poll"
msgstr "--poll 保存的旧挂载点"

#: misc-utils/findmnt.c:114
msgid "all mount options"
msgstr "全部挂臷选项"

#: misc-utils/findmnt.c:115
msgid "optional mount fields"
msgstr "可选的挂载字段"

#: misc-utils/findmnt.c:116
#, fuzzy
#| msgid "mount ID"
msgid "mount parent ID"
msgstr "挂载 ID"

#: misc-utils/findmnt.c:117
msgid "partition label"
msgstr "分区标签"

#: misc-utils/findmnt.c:119
msgid "pass number on parallel fsck(8) [fstab only]"
msgstr "并行 fsck(8) 的遍数(pass number) [仅 fstab]"

#: misc-utils/findmnt.c:120
msgid "VFS propagation flags"
msgstr "VFS 传播标志"

#: misc-utils/findmnt.c:121 misc-utils/lsblk.c:181
msgid "filesystem size"
msgstr "文件系统大小"

#: misc-utils/findmnt.c:122
#, fuzzy
#| msgid "source device"
msgid "all possible source devices"
msgstr "源设备"

#: misc-utils/findmnt.c:123
msgid "source device"
msgstr "源设备"

#: misc-utils/findmnt.c:124
msgid "mountpoint"
msgstr "挂载点"

#: misc-utils/findmnt.c:125
msgid "task ID"
msgstr "任务 ID"

#: misc-utils/findmnt.c:126 misc-utils/lsblk.c:183
msgid "filesystem size used"
msgstr "文件系统已用大小"

#: misc-utils/findmnt.c:127 misc-utils/lsblk.c:184
msgid "filesystem use percentage"
msgstr "文件系统使用百分比"

#: misc-utils/findmnt.c:128 misc-utils/lsblk.c:228
msgid "filesystem UUID"
msgstr "文件系统 UUID"

#: misc-utils/findmnt.c:129
msgid "VFS specific mount options"
msgstr "VFS 的特定挂载选项"

#: misc-utils/findmnt.c:340
#, c-format
msgid "unknown action: %s"
msgstr "未知操作: %s"

#: misc-utils/findmnt.c:741
msgid "mount"
msgstr "挂载"

#: misc-utils/findmnt.c:744
msgid "umount"
msgstr "卸载"

#: misc-utils/findmnt.c:747
msgid "remount"
msgstr "重新挂载"

#: misc-utils/findmnt.c:750
msgid "move"
msgstr "移动"

#: misc-utils/findmnt.c:927 misc-utils/findmnt.c:1205 sys-utils/eject.c:715
#: sys-utils/mount.c:408
msgid "failed to initialize libmount table"
msgstr "初始化 libmount table 失败"

#: misc-utils/findmnt.c:954 text-utils/hexdump-parse.c:84
#, c-format
msgid "can't read %s"
msgstr "不能读 %s"

#: misc-utils/findmnt.c:1145 misc-utils/findmnt.c:1211
#: misc-utils/findmnt-verify.c:101 misc-utils/findmnt-verify.c:529
#: sys-utils/fstrim.c:329 sys-utils/mount.c:134 sys-utils/mount.c:182
#: sys-utils/mount.c:249 sys-utils/swapoff.c:63 sys-utils/swapoff.c:173
#: sys-utils/swapon.c:247 sys-utils/swapon.c:290 sys-utils/swapon.c:750
#: sys-utils/umount.c:199
msgid "failed to initialize libmount iterator"
msgstr "无法初始化 libmount 迭代器"

#: misc-utils/findmnt.c:1217
msgid "failed to initialize libmount tabdiff"
msgstr "初始化 libmount tabdiff 失败"

#: misc-utils/findmnt.c:1245 misc-utils/kill.c:416
msgid "poll() failed"
msgstr "poll() 失败"

#: misc-utils/findmnt.c:1320
#, c-format
msgid ""
" %1$s [options]\n"
" %1$s [options] <device> | <mountpoint>\n"
" %1$s [options] <device> <mountpoint>\n"
" %1$s [options] [--source <device>] [--target <path> | --mountpoint <dir>]\n"
msgstr ""
" %1$s [选项]\n"
" %1$s [选项] <设备> | <挂臷点>\n"
" %1$s [选项] <设备> <挂臷点>\n"
" %1$s [选项] [--source <设备>] [--target <挂臷点>]\n"

#: misc-utils/findmnt.c:1327
msgid "Find a (mounted) filesystem.\n"
msgstr "查找(挂载的)文件系统。\n"

#: misc-utils/findmnt.c:1330
msgid " -s, --fstab            search in static table of filesystems\n"
msgstr " -s, --fstab            在文件系统表态表中搜索\n"

#: misc-utils/findmnt.c:1331
#, fuzzy
#| msgid ""
#| " -k, --kernel           search in kernel table of mounted\n"
#| "                          filesystems (default)\n"
msgid ""
" -m, --mtab             search in table of mounted filesystems\n"
"                          (includes user space mount options)\n"
msgstr ""
" -k, --kernel           在已挂载文件系统的内核表中搜索\n"
"                          (默认)\n"

#: misc-utils/findmnt.c:1333
msgid ""
" -k, --kernel           search in kernel table of mounted\n"
"                          filesystems (default)\n"
msgstr ""
" -k, --kernel           在已挂载文件系统的内核表中搜索\n"
"                          (默认)\n"

#: misc-utils/findmnt.c:1336
msgid " -p, --poll[=<list>]    monitor changes in table of mounted filesystems\n"
msgstr " -p, --poll[=<列表>]    监测已挂臷文件系统表的改变\n"

#: misc-utils/findmnt.c:1337
msgid " -w, --timeout <num>    upper limit in milliseconds that --poll will block\n"
msgstr " -w, --timeout <数字>   --poll 阻塞的时间上限(毫秒)\n"

#: misc-utils/findmnt.c:1340
msgid " -A, --all              disable all built-in filters, print all filesystems\n"
msgstr " -A, --all              禁用所有内置过滤器，打印所有文件系统\n"

#: misc-utils/findmnt.c:1341
msgid " -a, --ascii            use ASCII chars for tree formatting\n"
msgstr " -a, --ascii            用 ASCII 字符格式化树\n"

#: misc-utils/findmnt.c:1342
msgid " -b, --bytes            print sizes in bytes rather than in human readable format\n"
msgstr " -b, --bytes           以字节为单位而非易读的格式来打印大小\n"

#: misc-utils/findmnt.c:1343
msgid " -C, --nocanonicalize   don't canonicalize when comparing paths\n"
msgstr " -c, --no-canonicalize  在比较路径时不对路径规范化\n"

#: misc-utils/findmnt.c:1344
msgid " -c, --canonicalize     canonicalize printed paths\n"
msgstr " -c, --no-canonicalize  对打印的路径规范化\n"

#: misc-utils/findmnt.c:1345
msgid " -D, --df               imitate the output of df(1)\n"
msgstr " -D, --df               仿照 df(1) 输出\n"

#: misc-utils/findmnt.c:1346
msgid " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
msgstr " -d, --direction <单词> 搜索方向，“forward”(往前)或“backward”(往回)\n"

#: misc-utils/findmnt.c:1347
msgid ""
" -e, --evaluate         convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
"                          to device names\n"
msgstr ""
" -e, --evaluate         将标签(LABEL,UUID,PARTUUID,PARTLABEL) 转换为\n"
"                          设备名\n"

#: misc-utils/findmnt.c:1349
msgid " -F, --tab-file <path>  alternative file for -s, -m or -k options\n"
msgstr " -F, --tab-file <路径>  -s, -m 或 -k 选项的替代文件\n"

#: misc-utils/findmnt.c:1350
msgid " -f, --first-only       print the first found filesystem only\n"
msgstr " -f, --first-only       只打印找到的第一个文件系统\n"

#: misc-utils/findmnt.c:1351
msgid " -i, --invert           invert the sense of matching\n"
msgstr " -i, --invert           反转搜索的匹配\n"

#: misc-utils/findmnt.c:1352 misc-utils/lslocks.c:552 sys-utils/lsns.c:1291
#: sys-utils/rfkill.c:639
msgid " -J, --json             use JSON output format\n"
msgstr " -J, --json              使用 JSON 输出格式\n"

#: misc-utils/findmnt.c:1353 sys-utils/lsns.c:1292
msgid " -l, --list             use list format output\n"
msgstr " -l, --list             使用列表格式的输出\n"

#: misc-utils/findmnt.c:1354
msgid " -N, --task <tid>       use alternative namespace (/proc/<tid>/mountinfo file)\n"
msgstr " -N, --task <tid>       使用替代的名字空间(/proc/<tid>/mountinfo 文件)\n"

#: misc-utils/findmnt.c:1355
msgid " -n, --noheadings       don't print column headings\n"
msgstr " -n, --noheadings       不打印列标题\n"

#: misc-utils/findmnt.c:1356
msgid " -O, --options <list>   limit the set of filesystems by mount options\n"
msgstr " -O, --options <列表>   根据挂臷选项限制文件系统集合\n"

#: misc-utils/findmnt.c:1357
msgid " -o, --output <list>    the output columns to be shown\n"
msgstr " -o, --output <列表>    要显示的列\n"

#: misc-utils/findmnt.c:1358
msgid "     --output-all       output all available columns\n"
msgstr "     --output-all       输出所有可用列\n"

#: misc-utils/findmnt.c:1359
msgid " -P, --pairs            use key=\"value\" output format\n"
msgstr " -P, --pairs            使用 键=“值”的输出格式\n"

#: misc-utils/findmnt.c:1360
msgid "     --pseudo           print only pseudo-filesystems\n"
msgstr "     --pseudo           只打印伪文件系统\n"

#: misc-utils/findmnt.c:1361
#, fuzzy
#| msgid "     --verbose          print more details\n"
msgid "     --shadowed         print only filesystems over-mounted by another filesystem\n"
msgstr "     --verbose          打印更多细节\n"

#: misc-utils/findmnt.c:1362
msgid " -R, --submounts        print all submounts for the matching filesystems\n"
msgstr " -R, --submounts        打印匹配文件系统的所有子挂载(submount)\n"

#: misc-utils/findmnt.c:1363
msgid " -r, --raw              use raw output format\n"
msgstr " -r, --raw              使用原生输出格式\n"

#: misc-utils/findmnt.c:1364
msgid "     --real             print only real filesystems\n"
msgstr "     --real             只打印真实文件系统\n"

#: misc-utils/findmnt.c:1365
msgid ""
" -S, --source <string>  the device to mount (by name, maj:min, \n"
"                          LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
msgstr ""
" -S, --source <字符串>  要挂载的设备(按 名称, 主:次设备号, \n"
"                          LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"

#: misc-utils/findmnt.c:1367
msgid " -T, --target <path>    the path to the filesystem to use\n"
msgstr " -T, --target <路径>    要使用的文件系统的路径\n"

#: misc-utils/findmnt.c:1368
msgid "     --tree             enable tree format output if possible\n"
msgstr "     --tree             可能的话，启用树形格式化输出\n"

#: misc-utils/findmnt.c:1369
msgid " -M, --mountpoint <dir> the mountpoint directory\n"
msgstr " -M, --mountpoint <目录> 挂载点目录\n"

#: misc-utils/findmnt.c:1370
msgid " -t, --types <list>     limit the set of filesystems by FS types\n"
msgstr " -t, --types <列表>     根据文件系统类型限制文件系统集合\n"

#: misc-utils/findmnt.c:1371
msgid " -U, --uniq             ignore filesystems with duplicate target\n"
msgstr " -U, --uniq             忽略目标重复的文件系统\n"

#: misc-utils/findmnt.c:1372 misc-utils/lslocks.c:559 sys-utils/lsns.c:1299
msgid " -u, --notruncate       don't truncate text in columns\n"
msgstr " -u, --notruncate       不截断列中的文本\n"

#: misc-utils/findmnt.c:1373
msgid " -v, --nofsroot         don't print [/dir] for bind or btrfs mounts\n"
msgstr " -v, --nofsroot         对绑定式或 btrfs 挂载不打印[/dir]\n"

#: misc-utils/findmnt.c:1374
msgid " -y, --shell            use column names to be usable as shell variable identifiers\n"
msgstr ""

#: misc-utils/findmnt.c:1377
msgid " -x, --verify           verify mount table content (default is fstab)\n"
msgstr " -x, --verify           验证挂载表内容(默认为 fstab)\n"

#: misc-utils/findmnt.c:1378
msgid "     --verbose          print more details\n"
msgstr "     --verbose          打印更多细节\n"

#: misc-utils/findmnt.c:1379
msgid "     --vfs-all          print all VFS options\n"
msgstr "     --vfs-all          打印所有 VFS 选项\n"

#: misc-utils/findmnt.c:1519
#, c-format
msgid "unknown direction '%s'"
msgstr "未知方向“%s”"

#: misc-utils/findmnt.c:1596
msgid "invalid TID argument"
msgstr "无效的 TID 参数"

#: misc-utils/findmnt.c:1683
msgid "--poll accepts only one file, but more specified by --tab-file"
msgstr "--poll 只接受一个文件，但用 --tab-file 指定了多个"

#: misc-utils/findmnt.c:1687
msgid "options --target and --source can't be used together with command line element that is not an option"
msgstr "--target 和 --source 选项不能与非选项的命令行元素一起使用"

#: misc-utils/findmnt.c:1740 sys-utils/fstrim.c:308
msgid "failed to initialize libmount cache"
msgstr "初始化 libmount 缓存失败"

#: misc-utils/findmnt.c:1785
#, c-format
msgid "%s column is requested, but --poll is not enabled"
msgstr "请示了 %s 列，但未启用 --poll"

#: misc-utils/findmnt-verify.c:125
msgid "target specified more than once"
msgstr "不止一次指定目标"

#: misc-utils/findmnt-verify.c:127
#, c-format
msgid "wrong order: %s specified before %s"
msgstr "顺序错误：%s 在 %s 之前指定"

#: misc-utils/findmnt-verify.c:141
msgid "undefined target (fs_file)"
msgstr "未定义目标 (fs_file)"

#: misc-utils/findmnt-verify.c:148
#, c-format
msgid "non-canonical target path (real: %s)"
msgstr "目标路径不规范(实为：%s)"

#: misc-utils/findmnt-verify.c:153
#, c-format
msgid "unreachable on boot required target: %m"
msgstr "启动所需目标无法访问：%m"

#: misc-utils/findmnt-verify.c:155
#, c-format
msgid "unreachable target: %m"
msgstr "不可及的目标: %m"

#: misc-utils/findmnt-verify.c:159
msgid "target is not a directory"
msgstr "目标不是一个目录"

#: misc-utils/findmnt-verify.c:161
msgid "target exists"
msgstr "目标存在"

#: misc-utils/findmnt-verify.c:176
#, c-format
msgid "unreachable on boot required source: %s=%s"
msgstr "启动所需的源无法访问：%s=%s"

#: misc-utils/findmnt-verify.c:178
#, c-format
msgid "unreachable: %s=%s"
msgstr "不可及: %s=%s"

#: misc-utils/findmnt-verify.c:180
#, c-format
msgid "%s=%s translated to %s"
msgstr "%s=%s 转换为 %s"

#: misc-utils/findmnt-verify.c:201
msgid "undefined source (fs_spec)"
msgstr "源未定义(fs_spec)"

#: misc-utils/findmnt-verify.c:210
#, c-format
msgid "unsupported source tag: %s"
msgstr "不受支持的源标记︰ %s"

#: misc-utils/findmnt-verify.c:217
#, c-format
msgid "do not check %s source (pseudo/net)"
msgstr "不检查 %s 源(pseudo/net)"

#: misc-utils/findmnt-verify.c:220
#, c-format
msgid "unreachable source: %s: %m"
msgstr "无法访问源︰ %s: %m"

#: misc-utils/findmnt-verify.c:223
#, c-format
msgid "non-bind mount source %s is a directory or regular file"
msgstr "非绑定挂载源 %s 是一个目录或常规文件"

#: misc-utils/findmnt-verify.c:226
#, c-format
msgid "source %s is not a block device"
msgstr "源 %s 不是一个块设备"

#: misc-utils/findmnt-verify.c:228
#, c-format
msgid "source %s exists"
msgstr "源 %s 已存在"

#: misc-utils/findmnt-verify.c:241
#, c-format
msgid "VFS options: %s"
msgstr "VFS 选项︰ %s"

#: misc-utils/findmnt-verify.c:245
#, c-format
msgid "FS options: %s"
msgstr "FS 选项︰ %s"

#: misc-utils/findmnt-verify.c:249
#, c-format
msgid "userspace options: %s"
msgstr "用户空间选项︰ %s"

#: misc-utils/findmnt-verify.c:263
#, c-format
msgid "unsupported swaparea discard policy: %s"
msgstr "不支持的 swaparea 放弃策略︰ %s"

#: misc-utils/findmnt-verify.c:271
msgid "failed to parse swaparea priority option"
msgstr "解析 swaparea 优先级选项失败"

#: misc-utils/findmnt-verify.c:421
#, c-format
msgid "do not check %s FS type (pseudo/net)"
msgstr "不检查 %s 文件系统类型 (pseudo/net)"

#: misc-utils/findmnt-verify.c:433
msgid "\"none\" FS type is recommended for bind or move oprations only"
msgstr "\"none\" 这种文件系统类型只建议用于绑定或移动操作"

#: misc-utils/findmnt-verify.c:445
#, fuzzy, c-format
#| msgid "%s seems unspported by the current kernel"
msgid "%s seems unsupported by the current kernel"
msgstr "当前内核似乎不支持 %s"

#: misc-utils/findmnt-verify.c:452
#, fuzzy
#| msgid "unknown"
msgid "reason unknown"
msgstr "未知"

#: misc-utils/findmnt-verify.c:455 misc-utils/findmnt-verify.c:457
#, fuzzy, c-format
#| msgid "cannot detect on-disk filesystem type"
msgid "cannot detect on-disk filesystem type (%s)"
msgstr "无法检测磁盘上(on-disk)的文件系统类型"

#: misc-utils/findmnt-verify.c:467
#, c-format
msgid "%s does not match with on-disk %s"
msgstr "%s 与磁盘上的 %s 不匹配"

#: misc-utils/findmnt-verify.c:471
#, fuzzy, c-format
#| msgid "on-disk %s seems unspported by the current kernel"
msgid "on-disk %s seems unsupported by the current kernel"
msgstr "当前内核似乎不支持磁盘上的 %s"

#: misc-utils/findmnt-verify.c:475
#, c-format
msgid "FS type is %s"
msgstr "文件系统类型是 %s"

#: misc-utils/findmnt-verify.c:492
#, c-format
msgid "recommended root FS passno is 1 (current is %d)"
msgstr " 根文件系统的 passno 推荐值为 1 (当前是 %d)"

#: misc-utils/findmnt-verify.c:563
msgid ""
"your fstab has been modified, but systemd still uses the old version;\n"
"       use 'systemctl daemon-reload' to reload"
msgstr ""

#: misc-utils/findmnt-verify.c:574
#, c-format
msgid "%d parse error"
msgid_plural "%d parse errors"
msgstr[0] "%d 个解析错误"

#: misc-utils/findmnt-verify.c:575
#, c-format
msgid ", %d error"
msgid_plural ", %d errors"
msgstr[0] "，%d 个错误"

#: misc-utils/findmnt-verify.c:576
#, c-format
msgid ", %d warning"
msgid_plural ", %d warnings"
msgstr[0] "，%d 个警告"

#: misc-utils/findmnt-verify.c:579
#, c-format
msgid "Success, no errors or warnings detected\n"
msgstr "成功，未检测到错误或警告\n"

#: misc-utils/getopt.c:315
msgid "empty long option after -l or --long argument"
msgstr "-l 或 --long 参数后的长选项为空"

#: misc-utils/getopt.c:336
msgid "unknown shell after -s or --shell argument"
msgstr "-s 或 --shell 参数后是未知的 shell"

#: misc-utils/getopt.c:343
#, c-format
msgid ""
" %1$s <optstring> <parameters>\n"
" %1$s [options] [--] <optstring> <parameters>\n"
" %1$s [options] -o|--options <optstring> [options] [--] <parameters>\n"
msgstr ""
" %1$s 选项字符串 参数\n"
" %1$s [options] [--] 选项字符串 参数\n"
" %1$s [options] -o|--options 选项字符串 [选项] [--] 参数\n"

#: misc-utils/getopt.c:349
msgid "Parse command options.\n"
msgstr "解析命令选项。 \n"

#: misc-utils/getopt.c:352
msgid " -a, --alternative             allow long options starting with single -\n"
msgstr " -a, --alternative             允许长选项以单个 - 开头\n"

#: misc-utils/getopt.c:353
msgid " -l, --longoptions <longopts>  the long options to be recognized\n"
msgstr " -l, --longoptions <longopts>  要识别的长选项\n"

#: misc-utils/getopt.c:354
msgid " -n, --name <progname>         the name under which errors are reported\n"
msgstr " -n, --name <progname>         要报告其错误的程序名称\n"

#: misc-utils/getopt.c:355
msgid " -o, --options <optstring>     the short options to be recognized\n"
msgstr " -o, --options <optstring>     要识别的短选项名称\n"

#: misc-utils/getopt.c:356
msgid " -q, --quiet                   disable error reporting by getopt(3)\n"
msgstr " -q, --quiet                   禁止 getopt(3) 的错误报告\n"

#: misc-utils/getopt.c:357
msgid " -Q, --quiet-output            no normal output\n"
msgstr " -Q, --quiet-output            无常规输出\n"

#: misc-utils/getopt.c:358
msgid " -s, --shell <shell>           set quoting conventions to those of <shell>\n"
msgstr " -s, --shell <shell>           设置 <shell> 的引用习惯\n"

#: misc-utils/getopt.c:359
msgid " -T, --test                    test for getopt(1) version\n"
msgstr " -T, --test                   getopt(1) 版本测试\n"

#: misc-utils/getopt.c:360
msgid " -u, --unquoted                do not quote the output\n"
msgstr " -u, --unquoted                不引用输出\n"

#: misc-utils/getopt.c:409 misc-utils/getopt.c:468
msgid "missing optstring argument"
msgstr "缺少 optstring 参数"

#: misc-utils/getopt.c:463
msgid "internal error, contact the author."
msgstr "内部错误，请联系作者。"

#: misc-utils/hardlink.c:272
#, c-format
msgid "could not compile regular expression %s: %s"
msgstr "无法编译正则表达式 %s：%s"

#: misc-utils/hardlink.c:391
msgid "Mode:"
msgstr "模式："

#: misc-utils/hardlink.c:392
msgid "dry-run"
msgstr ""

#: misc-utils/hardlink.c:392
msgid "real"
msgstr ""

#: misc-utils/hardlink.c:393
msgid "Method:"
msgstr ""

#: misc-utils/hardlink.c:394
msgid "Files:"
msgstr "文件："

#: misc-utils/hardlink.c:395 misc-utils/hardlink.c:401
#: misc-utils/hardlink.c:405
#, c-format
msgid "%-25s %zu files"
msgstr ""

#: misc-utils/hardlink.c:395
msgid "Linked:"
msgstr ""

#: misc-utils/hardlink.c:398
#, c-format
msgid "%-25s %zu xattrs"
msgstr ""

#: misc-utils/hardlink.c:398 misc-utils/hardlink.c:401
msgid "Compared:"
msgstr ""

#: misc-utils/hardlink.c:405
msgid "Skipped reflinks:"
msgstr ""

#: misc-utils/hardlink.c:412
#, fuzzy
#| msgid "saved"
msgid "Saved:"
msgstr "已保存"

#: misc-utils/hardlink.c:415
#, fuzzy, c-format
#| msgid "%s (%<PRIu64>-%<PRIu64>): "
msgid "%-25s %<PRId64>.%06<PRId64> seconds"
msgstr "%s (%<PRIu64>-%<PRIu64>): "

#: misc-utils/hardlink.c:415
#, fuzzy
#| msgid "Description"
msgid "Duration:"
msgstr "描述"

#: misc-utils/hardlink.c:453
#, fuzzy, c-format
#| msgid "cannot get threshold for %s"
msgid "cannot get xattr names for %s"
msgstr "无法获取 %s 的阈值"

#: misc-utils/hardlink.c:469
#, fuzzy, c-format
#| msgid "cannot get threshold for %s"
msgid "cannot get xattr value of %s for %s"
msgstr "无法获取 %s 的阈值"

#: misc-utils/hardlink.c:549
#, c-format
msgid "Comparing xattrs of %s to %s"
msgstr ""

#: misc-utils/hardlink.c:716
msgid "Reflinking failed, fallback to hardlinking"
msgstr ""

#: misc-utils/hardlink.c:751
#, fuzzy, c-format
#| msgid "%s: symlinking to %s failed"
msgid "%s%sLinking %s to %s (-%s)"
msgstr "%s：符号链接到 %s 失败"

#: misc-utils/hardlink.c:752
msgid "[DryRun] "
msgstr ""

#: misc-utils/hardlink.c:766
#, fuzzy, c-format
#| msgid "cannot open %s: %s"
msgid "cannot link %s to %s"
msgstr "无法打开 %s：%s"

#: misc-utils/hardlink.c:769
#, c-format
msgid "cannot rename %s to %s"
msgstr "无法将 %s 改名为 %s"

#: misc-utils/hardlink.c:855
#, c-format
msgid "Skipped %s (smaller than configured size)"
msgstr ""

#: misc-utils/hardlink.c:865
#, fuzzy, c-format
#| msgid "%s: offset is greater than device size"
msgid "Skipped %s (greater than configured size)"
msgstr "%s：偏移量超过设备大小"

#: misc-utils/hardlink.c:893
#, fuzzy, c-format
#| msgid "target specified more than once"
msgid "Skipped %s (specified more than once)"
msgstr "不止一次指定目标"

#: misc-utils/hardlink.c:932
msgid "cannot continue"
msgstr "无法继续"

#: misc-utils/hardlink.c:1100
#, fuzzy, c-format
#| msgid "unsupported GPT attribute bit '%s'"
msgid "Skipped (attributes mismatch) %s"
msgstr "不支持的 GPT 属性位“%s”"

#: misc-utils/hardlink.c:1106
#, c-format
msgid "Skipped (already reflink) %s"
msgstr ""

#: misc-utils/hardlink.c:1127
#, c-format
msgid "Skipped (content mismatch) %s"
msgstr ""

#: misc-utils/hardlink.c:1157
#, c-format
msgid " %s [options] <directory>|<file> ...\n"
msgstr " %s [options] <目录>|<文件> ...\n"

#: misc-utils/hardlink.c:1161
msgid "Consolidate duplicate files using hardlinks.\n"
msgstr ""

#: misc-utils/hardlink.c:1164
#, fuzzy
#| msgid " -c, --content          compare only contents, ignore permission, etc."
msgid " -c, --content              compare only file contents, same as -pot\n"
msgstr " -c, --content          只比较内容，忽略权限等其它信息"

#: misc-utils/hardlink.c:1165
#, fuzzy
#| msgid " -S, --size <size>        maximum size for a single message\n"
msgid ""
" -b, --io-size <size>       I/O buffer size for file reading\n"
"                              (speedup, using more RAM)\n"
msgstr " -S, --size <大小>        单条消息的最大尺寸\n"

#: misc-utils/hardlink.c:1167
#, fuzzy
#| msgid " -U, --detect-case          detect uppercase terminal\n"
msgid " -d, --respect-dir          directory names have to be identical\n"
msgstr " -U, --detect-case          检测纯大写终端\n"

#: misc-utils/hardlink.c:1168
#, fuzzy
#| msgid " -U, --detect-case          detect uppercase terminal\n"
msgid " -f, --respect-name         filenames have to be identical\n"
msgstr " -U, --detect-case          检测纯大写终端\n"

#: misc-utils/hardlink.c:1169
msgid " -i, --include <regex>      regular expression to include files/dirs\n"
msgstr " -i, --include <正则>       用于包含文件/目录的正则表达式\n"

#: misc-utils/hardlink.c:1170
#, fuzzy
#| msgid ""
#| " -k, --kernel           search in kernel table of mounted\n"
#| "                          filesystems (default)\n"
msgid ""
" -m, --maximize             maximize the hardlink count, remove the file with\n"
"                              lowest hardlink count\n"
msgstr ""
" -k, --kernel           在已挂载文件系统的内核表中搜索\n"
"                          (默认)\n"

#: misc-utils/hardlink.c:1172
#, fuzzy
#| msgid " -i, --invert           invert the sense of matching\n"
msgid " -M, --minimize             reverse the meaning of -m\n"
msgstr " -i, --invert           反转搜索的匹配\n"

#: misc-utils/hardlink.c:1173
#, fuzzy
#| msgid " -n, --dry-run          don't actually link anything"
msgid " -n, --dry-run              don't actually link anything\n"
msgstr " -n, --dry-run          不要实际进行任何链接操作"

#: misc-utils/hardlink.c:1174
#, fuzzy
#| msgid " -t, --ignore           ignore failures\n"
msgid " -o, --ignore-owner         ignore owner changes\n"
msgstr " -t, --ignore           忽略失败\n"

#: misc-utils/hardlink.c:1175
msgid ""
" -O, --keep-oldest          keep the oldest file of multiple equal files\n"
"                              (lower precedence than minimize/maximize)\n"
msgstr ""

#: misc-utils/hardlink.c:1177
#, fuzzy
#| msgid " -t, --ignore           ignore failures\n"
msgid " -p, --ignore-mode          ignore changes of file mode\n"
msgstr " -t, --ignore           忽略失败\n"

#: misc-utils/hardlink.c:1178
msgid " -q, --quiet                quiet mode - don't print anything\n"
msgstr " -q, --quiet                安静模式 - 不要打印任何内容\n"

#: misc-utils/hardlink.c:1179
#, fuzzy
#| msgid " -S, --size <size>        maximum size for a single message\n"
msgid " -r, --cache-size <size>    memory limit for cached file content data\n"
msgstr " -S, --size <大小>        单条消息的最大尺寸\n"

#: misc-utils/hardlink.c:1180
#, fuzzy
#| msgid " -S, --size <size>        maximum size for a single message\n"
msgid " -s, --minimum-size <size>  minimum size for files.\n"
msgstr " -S, --size <大小>        单条消息的最大尺寸\n"

#: misc-utils/hardlink.c:1181
#, fuzzy
#| msgid " -S, --size <size>        maximum size for a single message\n"
msgid " -S, --maximum-size <size>  maximum size for files.\n"
msgstr " -S, --size <大小>        单条消息的最大尺寸\n"

#: misc-utils/hardlink.c:1182
#, fuzzy
#| msgid " -t, --notime                don't show any timestamp with messages\n"
msgid " -t, --ignore-time          ignore timestamps (when testing for equality)\n"
msgstr " -t, --notime                不显示任何消息的时间戳\n"

#: misc-utils/hardlink.c:1183
msgid " -v, --verbose              verbose output (repeat for more verbosity)\n"
msgstr " -v, --verbose              详尽输出（重复该参数可获得更详尽内容）\n"

#: misc-utils/hardlink.c:1184
#, fuzzy
#| msgid " -x, --exclude <regex>  exclude files matching pattern"
msgid " -x, --exclude <regex>      regular expression to exclude files\n"
msgstr " -x, --exclude <正则>   排除匹配指定模式的文件"

#: misc-utils/hardlink.c:1186
msgid " -X, --respect-xattrs       respect extended attributes\n"
msgstr ""

#: misc-utils/hardlink.c:1188
#, fuzzy
#| msgid " -f, --file <file>        log the contents of this file\n"
msgid " -y, --method <name>        file content comparison method\n"
msgstr " -f, --file <文件>       记录指定文件的内容\n"

#: misc-utils/hardlink.c:1191
#, fuzzy
#| msgid " -E, --echo <when>             echo input (auto, always or never)\n"
msgid "     --reflink[=<when>]     create clone/CoW copies (auto, always, never)\n"
msgstr " -E, --echo <时机>             回显输入（, always 或 never）\n"

#: misc-utils/hardlink.c:1192
msgid "     --skip-reflinks        skip already cloned files (enabled on --reflink)\n"
msgstr ""

#: misc-utils/hardlink.c:1303
#, fuzzy
#| msgid "failed to parse size"
msgid "failed to parse minimum size"
msgstr "解析大小失败"

#: misc-utils/hardlink.c:1306
#, fuzzy
#| msgid "failed to parse size"
msgid "failed to parse maximum size"
msgstr "解析大小失败"

#: misc-utils/hardlink.c:1309
#, fuzzy
#| msgid "failed to parse size"
msgid "failed to parse cache size"
msgstr "解析大小失败"

#: misc-utils/hardlink.c:1312
#, fuzzy
#| msgid "failed to parse size"
msgid "failed to parse I/O size"
msgstr "解析大小失败"

#: misc-utils/hardlink.c:1325
#, fuzzy, c-format
#| msgid "unsupported lock mode: %s"
msgid "unsupported reflink mode; %s"
msgstr "不支持的锁模式：%s"

#: misc-utils/hardlink.c:1406
msgid "cannot register exit handler"
msgstr "无法登记退出处理函数"

#: misc-utils/hardlink.c:1411
msgid "no directory or file specified"
msgstr "未指定目录或文件"

#: misc-utils/hardlink.c:1417
#, c-format
msgid "cannot initialize %s method, use 'memcmp' fallback"
msgstr ""

#: misc-utils/hardlink.c:1422
#, fuzzy
#| msgid "failed to initialize loopcxt"
msgid "failed to initialize files comparior"
msgstr "初始化 loopcxt 失败"

#: misc-utils/hardlink.c:1434
msgid "Scanning [device/inode/links]:"
msgstr ""

#: misc-utils/hardlink.c:1439 sys-utils/fstrim.c:97
#, c-format
msgid "cannot get realpath: %s"
msgstr "无法获取真实路径：%s"

#: misc-utils/hardlink.c:1445
#, c-format
msgid "cannot process %s"
msgstr "无法处理 %s"

#: misc-utils/kill.c:171
#, c-format
msgid "unknown signal %s; valid signals:"
msgstr "未知信号 %s；有效信号为："

#: misc-utils/kill.c:197
#, c-format
msgid " %s [options] <pid>|<name>...\n"
msgstr " %s [选项] <pid>|<名称> ...\n"

#: misc-utils/kill.c:200
msgid "Forcibly terminate a process.\n"
msgstr "强制结束某个进程。\n"

#: misc-utils/kill.c:203
msgid ""
" -a, --all              do not restrict the name-to-pid conversion to processes\n"
"                          with the same uid as the present process\n"
msgstr ""
" -a, --all              不限于只对和当前进程的 uid 相同的进程进行\n"
"                          名称-pid 转换\n"

#: misc-utils/kill.c:205
msgid " -s, --signal <signal>  send this <signal> instead of SIGTERM\n"
msgstr " -s, --signal <信号>    发送指定的<信号>而非 SIGTERM\n"

#: misc-utils/kill.c:207
msgid " -q, --queue <value>    use sigqueue(2), not kill(2), and pass <value> as data\n"
msgstr " -q, --queue <值>       使用 sigqueue(2) 代替 kill(2)，并传递<值>数据\n"

#: misc-utils/kill.c:210
msgid ""
"     --timeout <milliseconds> <follow-up signal>\n"
"                        wait up to timeout and send follow-up signal\n"
msgstr ""

#: misc-utils/kill.c:213
msgid " -p, --pid              print pids without signaling them\n"
msgstr " -p, --pid              打印 pid 而不向它们发送信号\n"

#: misc-utils/kill.c:214
msgid " -l, --list[=<signal>]  list signal names, or convert a signal number to a name\n"
msgstr " -l, --list [=<信号>]   列出信号名，或将一个信号数值转换为名称\n"

#: misc-utils/kill.c:215
msgid " -L, --table            list signal names and numbers\n"
msgstr " -L, --table            列出信号名和数值\n"

#: misc-utils/kill.c:216
msgid " -r, --require-handler  do not send signal if signal handler is not present\n"
msgstr ""

#: misc-utils/kill.c:217
msgid "     --verbose          print pids that will be signaled\n"
msgstr "     --verbose          打印将收到信号的 pid\n"

#: misc-utils/kill.c:241
msgid " (with: "
msgstr ""

#: misc-utils/kill.c:290 misc-utils/kill.c:299 sys-utils/setpriv.c:448
#: sys-utils/unshare.c:873
#, c-format
msgid "unknown signal: %s"
msgstr "未知信号：%s"

#: misc-utils/kill.c:314 misc-utils/kill.c:317 misc-utils/kill.c:326
#: misc-utils/kill.c:338 misc-utils/kill.c:381 sys-utils/mountpoint.c:195
#, c-format
msgid "%s and %s are mutually exclusive"
msgstr "%s 和 %s 相互排斥"

#: misc-utils/kill.c:341 misc-utils/kill.c:356 sys-utils/eject.c:210
#: sys-utils/eject.c:232 sys-utils/losetup.c:730 sys-utils/tunelp.c:164
#: sys-utils/tunelp.c:171 sys-utils/tunelp.c:178 sys-utils/tunelp.c:185
#: sys-utils/tunelp.c:192 sys-utils/tunelp.c:198 sys-utils/tunelp.c:202
#: sys-utils/tunelp.c:209 term-utils/setterm.c:211 term-utils/setterm.c:214
#: term-utils/setterm.c:233 term-utils/setterm.c:235 term-utils/setterm.c:273
#: term-utils/setterm.c:275 term-utils/setterm.c:291 term-utils/setterm.c:298
#: term-utils/setterm.c:300 term-utils/setterm.c:312 term-utils/setterm.c:314
#: term-utils/setterm.c:323 term-utils/setterm.c:331 term-utils/setterm.c:346
#: term-utils/setterm.c:348 term-utils/setterm.c:360 term-utils/setterm.c:362
#: term-utils/setterm.c:373 term-utils/setterm.c:561 term-utils/setterm.c:566
#: term-utils/setterm.c:571 term-utils/setterm.c:576 term-utils/setterm.c:600
#: term-utils/setterm.c:605 term-utils/setterm.c:610 term-utils/setterm.c:615
#: term-utils/setterm.c:620 term-utils/setterm.c:625 term-utils/setterm.c:634
#: term-utils/setterm.c:669 text-utils/more.c:329
msgid "argument error"
msgstr "参数出错"

#: misc-utils/kill.c:378
#, c-format
msgid "invalid signal name or number: %s"
msgstr "无效的信号名或数字：%s"

#: misc-utils/kill.c:404
#, c-format
msgid "pidfd_open() failed: %d"
msgstr "pidfd_open() 失败：%d"

#: misc-utils/kill.c:409 misc-utils/kill.c:423
msgid "pidfd_send_signal() failed"
msgstr "pidfd_send_signal() 失败"

#: misc-utils/kill.c:420
#, fuzzy, c-format
#| msgid "sending signal %d to pid %d\n"
msgid "timeout, sending signal %d to pid %d\n"
msgstr "将信号 %d 发送给 pid %d\n"

#: misc-utils/kill.c:435
#, c-format
msgid "sending signal %d to pid %d\n"
msgstr "将信号 %d 发送给 pid %d\n"

#: misc-utils/kill.c:453
#, c-format
msgid "sending signal to %s failed"
msgstr "向 %s 发送信号失败"

#: misc-utils/kill.c:478
#, c-format
msgid "not signalling pid %d, it has no userspace handler for signal %d\n"
msgstr ""

#: misc-utils/kill.c:540
#, c-format
msgid "cannot find process \"%s\""
msgstr "找不到进程“%s”"

#: misc-utils/logger.c:230
#, c-format
msgid "unknown facility name: %s"
msgstr "未知设施名称：%s"

#: misc-utils/logger.c:236
#, c-format
msgid "unknown priority name: %s"
msgstr "未知优先级名称：%s"

#: misc-utils/logger.c:248
#, c-format
msgid "openlog %s: pathname too long"
msgstr "openlog %s：路径名过长"

#: misc-utils/logger.c:275
#, c-format
msgid "socket %s"
msgstr "套接字 %s"

#: misc-utils/logger.c:312
#, c-format
msgid "failed to resolve name %s port %s: %s"
msgstr "解析名称 %s 端口 %s 失败：%s"

#: misc-utils/logger.c:329
#, c-format
msgid "failed to connect to %s port %s"
msgstr "连接 %s 端口 %s 失败"

#: misc-utils/logger.c:377
#, c-format
msgid "maximum input lines (%d) exceeded"
msgstr "超过了最大输入行数(%d)"

#: misc-utils/logger.c:520
msgid "send message failed"
msgstr "发送消息失败"

#: misc-utils/logger.c:590
#, c-format
msgid "structured data ID '%s' is not unique"
msgstr "结构化数据的 ID “%s” 不唯一"

#: misc-utils/logger.c:604
#, c-format
msgid "--sd-id was not specified for --sd-param %s"
msgstr "没有为 --sd-param %s 指定 --sd-id"

#: misc-utils/logger.c:808
msgid "localtime() failed"
msgstr "localtime() 失败"

#: misc-utils/logger.c:818
#, c-format
msgid "hostname '%s' is too long"
msgstr "主机名“'%s”太长"

#: misc-utils/logger.c:824
#, c-format
msgid "tag '%s' is too long"
msgstr "标签“%s”太长"

#: misc-utils/logger.c:887
#, c-format
msgid "ignoring unknown option argument: %s"
msgstr "将忽略未知的选项参数：%s"

#: misc-utils/logger.c:899
#, c-format
msgid "invalid argument: %s: using automatic errors"
msgstr "无效参数︰ %s︰ 将使用自动错误"

#: misc-utils/logger.c:1059
#, c-format
msgid " %s [options] [<message>]\n"
msgstr " %s [选项] [<消息>]\n"

#: misc-utils/logger.c:1062
msgid "Enter messages into the system log.\n"
msgstr "将消息输入系统日志。\n"

#: misc-utils/logger.c:1065
msgid " -i                       log the logger command's PID\n"
msgstr " -i                       记录日志程序的 PID\n"

#: misc-utils/logger.c:1066
msgid "     --id[=<id>]          log the given <id>, or otherwise the PID\n"
msgstr "     --id[=<id>]          记录指定的 <id>，否则记录 PID\n"

#: misc-utils/logger.c:1067
msgid " -f, --file <file>        log the contents of this file\n"
msgstr " -f, --file <文件>       记录指定文件的内容\n"

#: misc-utils/logger.c:1068
msgid " -e, --skip-empty         do not log empty lines when processing files\n"
msgstr " -e, --skip-empty         处理文件时不记录空行\n"

#: misc-utils/logger.c:1069
msgid "     --no-act             do everything except the write the log\n"
msgstr "     --no-act             操作但不实际写入日志\n"

#: misc-utils/logger.c:1070
msgid " -p, --priority <prio>    mark given message with this priority\n"
msgstr " -p, --priority <prio>    将指定消息标记为此优先级\n"

#: misc-utils/logger.c:1071
msgid "     --octet-count        use rfc6587 octet counting\n"
msgstr "     --octet-count        使用 rfc6587 八位元组(octet) 计数\n"

#: misc-utils/logger.c:1072
msgid "     --prio-prefix        look for a prefix on every line read from stdin\n"
msgstr "     --prio-prefix        从 stdin 输入的每一行查找前缀\n"

#: misc-utils/logger.c:1073
msgid " -s, --stderr             output message to standard error as well\n"
msgstr " -s, --stderr             也向标准错误输出消息\n"

#: misc-utils/logger.c:1074
msgid " -S, --size <size>        maximum size for a single message\n"
msgstr " -S, --size <大小>        单条消息的最大尺寸\n"

#: misc-utils/logger.c:1075
msgid " -t, --tag <tag>          mark every line with this tag\n"
msgstr " -t, --tag <tag>          向每一行添加指定标记\n"

#: misc-utils/logger.c:1076
msgid " -n, --server <name>      write to this remote syslog server\n"
msgstr " -n, --server <名称>      写入指定的远程 syslog 服务器\n"

#: misc-utils/logger.c:1077
msgid " -P, --port <port>        use this port for UDP or TCP connection\n"
msgstr " -P, --port <端口>        使用指定端口进行 UDP 或 TCP 连接\n"

#: misc-utils/logger.c:1078
msgid " -T, --tcp                use TCP only\n"
msgstr " -T, --tcp                只用 TCP\n"

#: misc-utils/logger.c:1079
msgid " -d, --udp                use UDP only\n"
msgstr " -d, --udp                只用 UDP\n"

#: misc-utils/logger.c:1080
msgid "     --rfc3164            use the obsolete BSD syslog protocol\n"
msgstr "     --rfc3164            使用过时的 BSD syslog 协议\n"

#: misc-utils/logger.c:1081
msgid ""
"     --rfc5424[=<snip>]   use the syslog protocol (the default for remote);\n"
"                            <snip> can be notime, or notq, and/or nohost\n"
msgstr ""
"     --rfc5424[=<snip>]   使用 syslog 协议(远程时默认);\n"
"                            <snip> 可以是 notime, 或 notq, 和/或 nohost\n"

#: misc-utils/logger.c:1083
msgid "     --sd-id <id>         rfc5424 structured data ID\n"
msgstr "     --sd-id <id>         rfc5424 结构化数据 ID\n"

#: misc-utils/logger.c:1084
msgid "     --sd-param <data>    rfc5424 structured data name=value\n"
msgstr "     --sd-param <数据>    rfc5424 结构化数据名称=值\n"

#: misc-utils/logger.c:1085
msgid "     --msgid <msgid>      set rfc5424 message id field\n"
msgstr "     --msgid <msgid>      设置 rfc5424 消息 id 字段\n"

#: misc-utils/logger.c:1086
msgid " -u, --socket <socket>    write to this Unix socket\n"
msgstr " -u, --socket <套接字>    写入此 Unix 套接字\n"

#: misc-utils/logger.c:1087
msgid ""
"     --socket-errors[=<on|off|auto>]\n"
"                          print connection errors when using Unix sockets\n"
msgstr ""
"     --socket-errors[=<on|off|auto>]\n"
"                          使用 Unix 套接字时打印连接错误\n"

#: misc-utils/logger.c:1090
msgid "     --journald[=<file>]  write journald entry\n"
msgstr "     --journald[=<文件>]  写 journald 记录\n"

#: misc-utils/logger.c:1176
#, c-format
msgid "file %s"
msgstr "文件 %s"

#: misc-utils/logger.c:1191
msgid "failed to parse id"
msgstr "解析 id 失败"

#: misc-utils/logger.c:1209
msgid "failed to parse message size"
msgstr "解析消息大小失败"

#: misc-utils/logger.c:1239
msgid "--msgid cannot contain space"
msgstr "--msgid 不能包含空格"

#: misc-utils/logger.c:1261
#, c-format
msgid "invalid structured data ID: '%s'"
msgstr "无效的结构化数据 ID: “%s”"

#: misc-utils/logger.c:1266
#, c-format
msgid "invalid structured data parameter: '%s'"
msgstr "无效的结构化数据参数: “%s”"

#: misc-utils/logger.c:1281
msgid "--file <file> and <message> are mutually exclusive, message is ignored"
msgstr "--file <文件> 和 <消息> 互斥，消息已忽略"

#: misc-utils/logger.c:1288
msgid "journald entry could not be written"
msgstr "无法写入 journald 项"

#: misc-utils/look.c:357
#, c-format
msgid " %s [options] <string> [<file>...]\n"
msgstr " %s [选项] <字符串> [<文件>...]\n"

#: misc-utils/look.c:360
msgid "Display lines beginning with a specified string.\n"
msgstr "显示以指定字符串开头的行。\n"

#: misc-utils/look.c:363
msgid " -a, --alternative        use the alternative dictionary\n"
msgstr " -a, --alternative        使用替代字典\n"

#: misc-utils/look.c:364
msgid " -d, --alphanum           compare only blanks and alphanumeric characters\n"
msgstr " -d, --alphanum           只比较空白和字母数字字符\n"

#: misc-utils/look.c:365
msgid " -f, --ignore-case        ignore case differences when comparing\n"
msgstr " -f, --ignore-case        比较时忽略大小写\n"

#: misc-utils/look.c:366
msgid " -t, --terminate <char>   define the string-termination character\n"
msgstr " -t, --terminate <字符>   定义字符串终止字符\n"

#: misc-utils/lsblk.c:170
msgid "alignment offset"
msgstr "对齐偏移量"

#: misc-utils/lsblk.c:171
msgid "udev ID (based on ID-LINK)"
msgstr ""

#: misc-utils/lsblk.c:172
msgid "the shortest udev /dev/disk/by-id link name"
msgstr ""

#: misc-utils/lsblk.c:173
msgid "discard alignment offset"
msgstr "忽略对齐偏移量"

#: misc-utils/lsblk.c:174
#, fuzzy
#| msgid "removable device"
msgid "dax-capable device"
msgstr "可移动设备"

#: misc-utils/lsblk.c:175
msgid "discard granularity"
msgstr "忽略粒度"

#: misc-utils/lsblk.c:176
#, fuzzy
#| msgid "disk serial number"
msgid "disk sequence number"
msgstr "磁盘序列号"

#: misc-utils/lsblk.c:177
msgid "discard max bytes"
msgstr "忽略最大字节数"

#: misc-utils/lsblk.c:178
msgid "discard zeroes data"
msgstr "忽略零数据"

#: misc-utils/lsblk.c:180
#, fuzzy
#| msgid "filesystem root"
msgid "mounted filesystem roots"
msgstr "文件系统 root"

#: misc-utils/lsblk.c:185
msgid "filesystem version"
msgstr "文件系统版本"

#: misc-utils/lsblk.c:186
msgid "group name"
msgstr "组名"

#: misc-utils/lsblk.c:187
msgid "Host:Channel:Target:Lun for SCSI"
msgstr "SCSI 的 Host:Channel:Target:Lun"

#: misc-utils/lsblk.c:188
msgid "removable or hotplug device (usb, pcmcia, ...)"
msgstr "可移动或热插拔设备(usb, pcmcia, ...)"

#: misc-utils/lsblk.c:189
msgid "internal kernel device name"
msgstr "内部内核设备名称"

#: misc-utils/lsblk.c:190 misc-utils/wipefs.c:110
msgid "filesystem LABEL"
msgstr "文件系统标签"

#: misc-utils/lsblk.c:191
msgid "logical sector size"
msgstr "逻辑扇区大小"

#: misc-utils/lsblk.c:193
msgid "minimum I/O size"
msgstr "最小 I/O 大小"

#: misc-utils/lsblk.c:194
msgid "device identifier"
msgstr "设备标识符"

#: misc-utils/lsblk.c:195
msgid "device node permissions"
msgstr "设备节点权限"

#: misc-utils/lsblk.c:196
#, fuzzy
#| msgid "device name"
msgid "device queues"
msgstr "设备名"

#: misc-utils/lsblk.c:197
msgid "device name"
msgstr "设备名"

#: misc-utils/lsblk.c:198
msgid "optimal I/O size"
msgstr "最优 I/O 大小"

#: misc-utils/lsblk.c:201
msgid "partition LABEL"
msgstr "分区 LABEL"

#: misc-utils/lsblk.c:202
#, fuzzy
#| msgid "%s: partition %zu: failed to get partition type"
msgid "partition number as read from the partition table"
msgstr "%s: 分区 %zu:获取分区类型失败"

#: misc-utils/lsblk.c:203
msgid "partition type name"
msgstr "分区类型名"

#: misc-utils/lsblk.c:204
#, fuzzy
#| msgid "partition type UUID"
msgid "partition type code or UUID"
msgstr "分区类型 UUID"

#: misc-utils/lsblk.c:206
msgid "path to the device node"
msgstr "到设备节点的路径"

#: misc-utils/lsblk.c:207
msgid "physical sector size"
msgstr "物理扇区大小"

#: misc-utils/lsblk.c:208
msgid "internal parent kernel device name"
msgstr "内部上级内核设备名称"

#: misc-utils/lsblk.c:209
msgid "partition table type"
msgstr "分区表类型"

#: misc-utils/lsblk.c:210
msgid "partition table identifier (usually UUID)"
msgstr "分区表标识符（通常为 UUID）"

#: misc-utils/lsblk.c:211
msgid "adds randomness"
msgstr "添加随机性"

#: misc-utils/lsblk.c:212
msgid "read-ahead of the device"
msgstr "该设备的预读(read-ahead)"

#: misc-utils/lsblk.c:213
msgid "device revision"
msgstr "设备修订版本"

#: misc-utils/lsblk.c:214
msgid "removable device"
msgstr "可移动设备"

#: misc-utils/lsblk.c:215
msgid "rotational device"
msgstr "转动设备"

#: misc-utils/lsblk.c:216 sys-utils/losetup.c:79
msgid "read-only device"
msgstr "只读设备"

#: misc-utils/lsblk.c:217
msgid "request queue size"
msgstr "请求队列大小"

#: misc-utils/lsblk.c:218
msgid "I/O scheduler name"
msgstr "I/O 调度器名称"

#: misc-utils/lsblk.c:219
msgid "disk serial number"
msgstr "磁盘序列号"

#: misc-utils/lsblk.c:220
msgid "size of the device"
msgstr "磁盘容量"

#: misc-utils/lsblk.c:221
#, fuzzy
#| msgid "partition name"
msgid "partition start offset"
msgstr "分区名"

#: misc-utils/lsblk.c:222
msgid "state of the device"
msgstr "设备的状态"

#: misc-utils/lsblk.c:223
msgid "de-duplicated chain of subsystems"
msgstr "对成链的子系统去重"

#: misc-utils/lsblk.c:224
#, fuzzy
#| msgid "where the device is mounted"
msgid "all locations where device is mounted"
msgstr "设备挂载位置"

#: misc-utils/lsblk.c:225 sys-utils/zramctl.c:86
msgid "where the device is mounted"
msgstr "设备挂载位置"

#: misc-utils/lsblk.c:226
msgid "device transport type"
msgstr "设备传输类型"

#: misc-utils/lsblk.c:227
msgid "device type"
msgstr "设备类型"

#: misc-utils/lsblk.c:229
msgid "device vendor"
msgstr "设备制造商"

#: misc-utils/lsblk.c:230
msgid "write same max bytes"
msgstr "写相同的最大字节数"

#: misc-utils/lsblk.c:231
msgid "unique storage identifier"
msgstr "惟一存储标识符"

#: misc-utils/lsblk.c:232
msgid "zone model"
msgstr ""

#: misc-utils/lsblk.c:233
#, fuzzy
#| msgid "min seg size"
msgid "zone size"
msgstr "最小段大小"

#: misc-utils/lsblk.c:234
#, fuzzy
#| msgid "discard granularity"
msgid "zone write granularity"
msgstr "忽略粒度"

#: misc-utils/lsblk.c:235
#, fuzzy
#| msgid "write same max bytes"
msgid "zone append max bytes"
msgstr "写相同的最大字节数"

#: misc-utils/lsblk.c:236
#, fuzzy
#| msgid "number of sectors"
msgid "number of zones"
msgstr "扇区数"

#: misc-utils/lsblk.c:237
#, fuzzy
#| msgid "max number of open files"
msgid "maximum number of open zones"
msgstr "打开文件的最大数量"

#: misc-utils/lsblk.c:238
#, fuzzy
#| msgid "max number of processes"
msgid "maximum number of active zones"
msgstr "最大进程数"

#: misc-utils/lsblk.c:1433
msgid "failed to allocate device"
msgstr "分配设备失败"

#: misc-utils/lsblk.c:1493
msgid "failed to open device directory in sysfs"
msgstr "打开 sysfs 中的设备目录失败"

#: misc-utils/lsblk.c:1681
#, c-format
msgid "%s: failed to get sysfs name"
msgstr "%s：获取 sysfs 名称失败"

#: misc-utils/lsblk.c:1693
#, c-format
msgid "%s: failed to get whole-disk device number"
msgstr "%s：获取 整盘 设备号失败"

#: misc-utils/lsblk.c:1766 misc-utils/lsblk.c:1814
msgid "failed to allocate /sys handler"
msgstr "分配 /sys 处理程序失败"

#: misc-utils/lsblk.c:1874 misc-utils/lsblk.c:1876 misc-utils/lsblk.c:1905
#: misc-utils/lsblk.c:1907
#, c-format
msgid "failed to parse list '%s'"
msgstr "解析列表“%s”失败"

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:1881
#, c-format
msgid "the list of excluded devices is too large (limit is %d devices)"
msgstr "排除设备列表过大(限制为 %d 台设备)"

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:1912
#, c-format
msgid "the list of included devices is too large (limit is %d devices)"
msgstr "包含设备列表过大(限制为 %d 台设备)"

#: misc-utils/lsblk.c:1981 sys-utils/wdctl.c:225
#, c-format
msgid " %s [options] [<device> ...]\n"
msgstr " %s [选项] [<设备> ...]\n"

#: misc-utils/lsblk.c:1984
msgid "List information about block devices.\n"
msgstr "列出块设备的信息。\n"

#: misc-utils/lsblk.c:1987
#, fuzzy
#| msgid " -d, --nodeps         don't print slaves or holders\n"
msgid " -A, --noempty        don't print empty devices\n"
msgstr " -d, --nodeps         不打印从属设备(slave)或占位设备(holder)\n"

#: misc-utils/lsblk.c:1988
msgid " -D, --discard        print discard capabilities\n"
msgstr " -D, --discard        打印时丢弃能力\n"

#: misc-utils/lsblk.c:1989
#, fuzzy
#| msgid " -x, --sort <column>  sort output by <column>\n"
msgid " -E, --dedup <column> de-duplicate output by <column>\n"
msgstr " -x, --sort <列>      按<列>对输出排序\n"

#: misc-utils/lsblk.c:1990
msgid " -I, --include <list> show only devices with specified major numbers\n"
msgstr " -I, --include <列表> 只显示有指定主设备号的设备\n"

#: misc-utils/lsblk.c:1991 sys-utils/lsirq.c:63 sys-utils/lsmem.c:525
msgid " -J, --json           use JSON output format\n"
msgstr " -J, --json           使用 JSON 输出格式\n"

#: misc-utils/lsblk.c:1992
#, fuzzy
#| msgid " -d, --dump <dev>                  dump partition table (usable for later input)\n"
msgid " -M, --merge          group parents of sub-trees (usable for RAIDs, Multi-path)\n"
msgstr " -d, --dump <设备>                 转储分区表(用于后续输入)\n"

#: misc-utils/lsblk.c:1993
msgid " -O, --output-all     output all columns\n"
msgstr " -O, --output-all     输出所有列\n"

#: misc-utils/lsblk.c:1995
msgid " -S, --scsi           output info about SCSI devices\n"
msgstr " -S, --scsi           输出有关 SCSI 设备的信息\n"

#: misc-utils/lsblk.c:1996
#, fuzzy
#| msgid " -S, --scsi           output info about SCSI devices\n"
msgid " -N, --nvme           output info about NVMe devices\n"
msgstr " -S, --scsi           输出有关 SCSI 设备的信息\n"

#: misc-utils/lsblk.c:1997
#, fuzzy
#| msgid " -S, --scsi           output info about SCSI devices\n"
msgid " -v, --virtio         output info about virtio devices\n"
msgstr " -S, --scsi           输出有关 SCSI 设备的信息\n"

#: misc-utils/lsblk.c:1998
#, fuzzy
#| msgid " -l, --list           use list format output\n"
msgid " -T, --tree[=<column>] use tree format output\n"
msgstr " -l, --list           使用列表格式的输出\n"

#: misc-utils/lsblk.c:1999
msgid " -a, --all            print all devices\n"
msgstr " -a, --all            打印所有设备\n"

#: misc-utils/lsblk.c:2001
msgid " -d, --nodeps         don't print slaves or holders\n"
msgstr " -d, --nodeps         不打印从属设备(slave)或占位设备(holder)\n"

#: misc-utils/lsblk.c:2002
msgid " -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
msgstr " -e, --exclude <列表> 根据主设备号排除设备(默认：内存盘)\n"

#: misc-utils/lsblk.c:2003
msgid " -f, --fs             output info about filesystems\n"
msgstr " -f, --fs             输出文件系统信息\n"

#: misc-utils/lsblk.c:2004
msgid " -i, --ascii          use ascii characters only\n"
msgstr " -i, --ascii          只使用 ascii 字符\n"

#: misc-utils/lsblk.c:2005
msgid " -l, --list           use list format output\n"
msgstr " -l, --list           使用列表格式的输出\n"

#: misc-utils/lsblk.c:2006
msgid " -m, --perms          output info about permissions\n"
msgstr " -m, --perms          输出权限信息\n"

#: misc-utils/lsblk.c:2007 sys-utils/lsirq.c:65 sys-utils/lsmem.c:529
msgid " -n, --noheadings     don't print headings\n"
msgstr " -n, --noheadings     不打印标题\n"

#: misc-utils/lsblk.c:2008 sys-utils/lsmem.c:530
msgid " -o, --output <list>  output columns\n"
msgstr " -o, --output <列表>  输出列\n"

#: misc-utils/lsblk.c:2009
msgid " -p, --paths          print complete device path\n"
msgstr " -p, --paths          打印完整设备路径\n"

#: misc-utils/lsblk.c:2011
msgid " -s, --inverse        inverse dependencies\n"
msgstr " -s, --inverse        反向依赖\n"

#: misc-utils/lsblk.c:2012
msgid " -t, --topology       output info about topology\n"
msgstr " -t, --topology       输出拓扑信息\n"

#: misc-utils/lsblk.c:2013
#, fuzzy
#| msgid " -c, --columns <width>    width of output in number of characters\n"
msgid " -w, --width <num>    specifies output width as number of characters\n"
msgstr " -c, --columns <宽度>     输出宽度(字符数)\n"

#: misc-utils/lsblk.c:2014
msgid " -x, --sort <column>  sort output by <column>\n"
msgstr " -x, --sort <列>      按<列>对输出排序\n"

#: misc-utils/lsblk.c:2015
msgid " -y, --shell          use column names to be usable as shell variable identifiers\n"
msgstr ""

#: misc-utils/lsblk.c:2016
#, fuzzy
#| msgid " -c, --offline           print offline CPUs only\n"
msgid " -z, --zoned          print zone related information\n"
msgstr " -c, --offline           只打印离线 CPU\n"

#: misc-utils/lsblk.c:2017
msgid "     --sysroot <dir>  use specified directory as system root\n"
msgstr " -s, --sysroot <目录>    以指定目录作为系统根目录\n"

#: misc-utils/lsblk.c:2034
#, c-format
msgid "failed to access sysfs directory: %s"
msgstr "无法访问 sysfs 目录：%s"

#: misc-utils/lsblk.c:2280
#, fuzzy
#| msgid "invalid partition number argument"
msgid "invalid output width number argument"
msgstr "无效的分区号参数"

#: misc-utils/lsblk.c:2439
msgid "failed to allocate device tree"
msgstr "分配设备树失败"

#: misc-utils/lsfd.c:125
msgid "class of anonymous inode"
msgstr ""

#: misc-utils/lsfd.c:128
#, fuzzy
#| msgid "cannot create child process"
msgid "association between file and process"
msgstr "无法创建子进程"

#: misc-utils/lsfd.c:131
msgid "block device driver name resolved by /proc/devices"
msgstr ""

#: misc-utils/lsfd.c:134
msgid "character device driver name resolved by /proc/devices"
msgstr ""

#: misc-utils/lsfd.c:137
#, fuzzy
#| msgid "command of the process holding the lock"
msgid "command of the process opening the file"
msgstr "持有锁的进程命令"

#: misc-utils/lsfd.c:140
msgid "reachability from the file system"
msgstr ""

#: misc-utils/lsfd.c:143
#, fuzzy
#| msgid "device backing file"
msgid "ID of device containing file"
msgstr "设备后备文件"

#: misc-utils/lsfd.c:146
msgid "device type (blk, char, or nodev)"
msgstr ""

#: misc-utils/lsfd.c:149
msgid "IPC endpoints information communicated with the fd"
msgstr ""

#: misc-utils/lsfd.c:152
msgid "flags specified when opening the file"
msgstr ""

#: misc-utils/lsfd.c:155
#, fuzzy
#| msgid "bad file descriptor"
msgid "file descriptor for the file"
msgstr "错误的文件描述符"

#: misc-utils/lsfd.c:158
#, fuzzy
#| msgid "max number of open files"
msgid "user ID number of the file's owner"
msgstr "打开文件的最大数量"

#: misc-utils/lsfd.c:161 misc-utils/lslocks.c:79
#, fuzzy
#| msgid "logical NUMA node number"
msgid "inode number"
msgstr "逻辑 NUMA 节点数量"

#: misc-utils/lsfd.c:164
msgid "local IP address"
msgstr ""

#: misc-utils/lsfd.c:167
msgid "remote IP address"
msgstr ""

#: misc-utils/lsfd.c:170
msgid "local IPv6 address"
msgstr ""

#: misc-utils/lsfd.c:173
msgid "remote IPv6 address"
msgstr ""

#: misc-utils/lsfd.c:176
#, fuzzy
#| msgid "size of the file"
msgid "name of the file (raw)"
msgstr "文件大小"

#: misc-utils/lsfd.c:179
msgid "opened by a kernel thread"
msgstr ""

#: misc-utils/lsfd.c:182
msgid "device ID for special, or ID of device containing file"
msgstr ""

#: misc-utils/lsfd.c:185
msgid "length of file mapping (in page)"
msgstr ""

#: misc-utils/lsfd.c:188
msgid "misc character device name resolved by /proc/misc"
msgstr ""

#: misc-utils/lsfd.c:191
#, fuzzy
#| msgid "mount"
msgid "mount id"
msgstr "挂载"

#: misc-utils/lsfd.c:194
#, fuzzy
#| msgid "lock access mode"
msgid "access mode (rwx)"
msgstr "锁访问模式"

#: misc-utils/lsfd.c:197
#, fuzzy
#| msgid "size of the file"
msgid "name of the file (cooked)"
msgstr "文件大小"

#: misc-utils/lsfd.c:200
msgid "netlink multicast groups"
msgstr ""

#: misc-utils/lsfd.c:203
msgid "netlink local port id"
msgstr ""

#: misc-utils/lsfd.c:206
msgid "netlink protocol"
msgstr ""

#: misc-utils/lsfd.c:209
#, fuzzy
#| msgid "ncount"
msgid "link count"
msgstr "ncount"

#: misc-utils/lsfd.c:212
msgid "name of the namespace (NS.TYPE:[INODE])"
msgstr ""

#: misc-utils/lsfd.c:215
#, fuzzy
#| msgid "path to the namespace"
msgid "type of the namespace"
msgstr "名字空间路径"

#: misc-utils/lsfd.c:218
#, fuzzy
#| msgid "size of the file"
msgid "owner of the file"
msgstr "文件大小"

#: misc-utils/lsfd.c:221
msgid "net interface associated with the packet socket"
msgstr ""

#: misc-utils/lsfd.c:224
msgid "L3 protocol associated with the packet socket"
msgstr ""

#: misc-utils/lsfd.c:227
msgid "block device name resolved by /proc/partition"
msgstr ""

#: misc-utils/lsfd.c:230
#, fuzzy
#| msgid "PID of the process holding the lock"
msgid "PID of the process opening the file"
msgstr "持有锁的进程 PID"

#: misc-utils/lsfd.c:233
#, fuzzy
#| msgid "command of the process holding the lock"
msgid "command of the process targeted by the pidfd"
msgstr "持有锁的进程命令"

#: misc-utils/lsfd.c:236
msgid "NSpid field in fdinfo of the pidfd"
msgstr ""

#: misc-utils/lsfd.c:239
#, fuzzy
#| msgid "PID of the process holding the lock"
msgid "PID of the process targeted by the pidfd"
msgstr "持有锁的进程 PID"

#: misc-utils/lsfd.c:242
msgid "ICMP echo request ID"
msgstr ""

#: misc-utils/lsfd.c:245
#, fuzzy
#| msgid "%s: cannot get file position"
msgid "file position"
msgstr "%s：无法获取文件位置"

#: misc-utils/lsfd.c:248
#, fuzzy
#| msgid "Number of attached processes"
msgid "protocol number of the raw socket"
msgstr "附加的进程数"

#: misc-utils/lsfd.c:251
#, fuzzy
#| msgid "no device specified"
msgid "device ID (if special file)"
msgstr "未指定设备"

#: misc-utils/lsfd.c:254
#, fuzzy
#| msgid "max file size"
msgid "file size"
msgstr "最大文件尺寸"

#: misc-utils/lsfd.c:257
msgid "listening socket"
msgstr ""

#: misc-utils/lsfd.c:260
msgid "inode identifying network namespace where the socket belongs to"
msgstr ""

#: misc-utils/lsfd.c:263
#, fuzzy
#| msgid "partition name"
msgid "protocol name"
msgstr "分区名"

#: misc-utils/lsfd.c:266
msgid "State of socket"
msgstr ""

#: misc-utils/lsfd.c:269
#, fuzzy
#| msgid "socket"
msgid "Type of socket"
msgstr "套接字"

#: misc-utils/lsfd.c:272
#, fuzzy
#| msgid "failed to read new partition from device; ignoring --move-data"
msgid "file system, partition, or device containing file"
msgstr "从设备读取新分区失败；将忽略 --move-data"

#: misc-utils/lsfd.c:275
#, fuzzy
#| msgid "filesystem type"
msgid "file type (raw)"
msgstr "文件系统类型"

#: misc-utils/lsfd.c:278
msgid "local TCP address (INET address:TCP port)"
msgstr ""

#: misc-utils/lsfd.c:281
msgid "remote TCP address (INET address:TCP port)"
msgstr ""

#: misc-utils/lsfd.c:284
#, fuzzy
#| msgid "logical CPU number"
msgid "local TCP port"
msgstr "逻辑 CPU 数量"

#: misc-utils/lsfd.c:287
msgid "remote TCP port"
msgstr ""

#: misc-utils/lsfd.c:290
#, fuzzy
#| msgid "PID of the process holding the lock"
msgid "thread ID of the process opening the file"
msgstr "持有锁的进程 PID"

#: misc-utils/lsfd.c:293
#, fuzzy
#| msgid "filesystem type"
msgid "file type (cooked)"
msgstr "文件系统类型"

#: misc-utils/lsfd.c:296
msgid "local UDP address (INET address:UDP port)"
msgstr ""

#: misc-utils/lsfd.c:299
msgid "remote UDP address (INET address:UDP port)"
msgstr ""

#: misc-utils/lsfd.c:302
msgid "local UDP port"
msgstr ""

#: misc-utils/lsfd.c:305
msgid "remote UDP port"
msgstr ""

#: misc-utils/lsfd.c:308
msgid "local UDPLite address (INET address:UDPLite port)"
msgstr ""

#: misc-utils/lsfd.c:311
msgid "remote UDPLite address (INET address:UDPLite port)"
msgstr ""

#: misc-utils/lsfd.c:314
msgid "local UDPLite port"
msgstr ""

#: misc-utils/lsfd.c:317
msgid "remote UDPLite port"
msgstr ""

#: misc-utils/lsfd.c:320
#, fuzzy
#| msgid "Number of attached processes"
msgid "user ID number of the process"
msgstr "附加的进程数"

#: misc-utils/lsfd.c:323
msgid "filesystem pathname for UNIX domain socket"
msgstr ""

#: misc-utils/lsfd.c:326
#, fuzzy
#| msgid "Number of attached processes"
msgid "user of the process"
msgstr "附加的进程数"

#: misc-utils/lsfd.c:370 sys-utils/prlimit.c:87
msgid "processes"
msgstr "进程"

#: misc-utils/lsfd.c:374
#, fuzzy
#| msgid "Attached processes"
msgid "root owned processes"
msgstr "附加的进程"

#: misc-utils/lsfd.c:378
#, fuzzy
#| msgid "kernel messages"
msgid "kernel threads"
msgstr "内核消息"

#: misc-utils/lsfd.c:382
#, fuzzy
#| msgid "open failed"
msgid "open files"
msgstr "打开失败"

#: misc-utils/lsfd.c:386
#, fuzzy
#| msgid "open failed"
msgid "RO open files"
msgstr "打开失败"

#: misc-utils/lsfd.c:390
#, fuzzy
#| msgid "open failed"
msgid "WO open files"
msgstr "打开失败"

#: misc-utils/lsfd.c:394
msgid "shared mappings"
msgstr ""

#: misc-utils/lsfd.c:398
msgid "RO shared mappings"
msgstr ""

#: misc-utils/lsfd.c:402
msgid "WO shared mappings"
msgstr ""

#: misc-utils/lsfd.c:406
msgid "regular files"
msgstr ""

#: misc-utils/lsfd.c:410
#, fuzzy
#| msgid "Sectors"
msgid "directories"
msgstr "扇区"

#: misc-utils/lsfd.c:414
#, fuzzy
#| msgid "socket"
msgid "sockets"
msgstr "套接字"

#: misc-utils/lsfd.c:418
msgid "fifos/pipes"
msgstr ""

#: misc-utils/lsfd.c:422
#, fuzzy
#| msgid "/dev/%s: not a character device"
msgid "character devices"
msgstr "/dev/%s：不是字符设备"

#: misc-utils/lsfd.c:426
#, fuzzy
#| msgid "block device name"
msgid "block devices"
msgstr "块设备名称"

#: misc-utils/lsfd.c:430
#, fuzzy
#| msgid "unknown user %s"
msgid "unknown types"
msgstr "未知用户 %s"

#: misc-utils/lsfd.c:526
msgid "too many columns are added via filter expression"
msgstr ""

#: misc-utils/lsfd.c:1323
#, fuzzy
#| msgid "failed to allocate UID cache"
msgid "failed to allocate an idcache"
msgstr "分配 UID 缓存失败"

#: misc-utils/lsfd.c:1378 misc-utils/lslocks.c:292
msgid "(unknown)"
msgstr "(未知)"

#: misc-utils/lsfd.c:1434 misc-utils/lsfd-filter.c:374
#: misc-utils/lsfd-sock-xinfo.c:152 misc-utils/lsfd-sock-xinfo.c:279
#, fuzzy
#| msgid "failed to allocate memory: %m"
msgid "failed to allocate memory"
msgstr "分配内存失败：%m"

#: misc-utils/lsfd.c:1465
#, fuzzy, c-format
#| msgid "unexpected value in %s: %ju"
msgid "unexpected value for pid specification: %s"
msgstr "%s 有异常值：%ju"

#: misc-utils/lsfd.c:1467
#, c-format
msgid "garbage at the end of pid specification: %s"
msgstr ""

#: misc-utils/lsfd.c:1469
#, c-format
msgid "out of range value for pid specification: %ld"
msgstr ""

#: misc-utils/lsfd.c:1513
#, fuzzy
#| msgid "failed to initialize procfs handler"
msgid "failed to alloc procfs handler"
msgstr "%s：初始化 procfs 处理函数失败"

#: misc-utils/lsfd.c:1517
#, fuzzy
#| msgid "failed to open: %s"
msgid "failed to open /proc"
msgstr "打开失败：%s"

#: misc-utils/lsfd.c:1541
#, fuzzy
#| msgid " -n, --noheadings          don't print headings\n"
msgid " -l,      --threads           list in threads level\n"
msgstr " -n, --noheadings          不打印标题\n"

#: misc-utils/lsfd.c:1542
#, fuzzy
#| msgid " -J, --json             use JSON output format\n"
msgid " -J,      --json              use JSON output format\n"
msgstr " -J, --json              使用 JSON 输出格式\n"

#: misc-utils/lsfd.c:1543
#, fuzzy
#| msgid "     --noheadings         don't print headings\n"
msgid " -n,      --noheadings        don't print headings\n"
msgstr "      --noheadings     不打印标题\n"

#: misc-utils/lsfd.c:1544
#, fuzzy
#| msgid " -o, --output <list>       output columns\n"
msgid " -o,      --output <list>     output columns\n"
msgstr " -o, --output <列表>       输出列\n"

#: misc-utils/lsfd.c:1545
#, fuzzy
#| msgid " -r, --raw              use raw output format\n"
msgid " -r,      --raw               use raw output format\n"
msgstr " -r, --raw              使用原生输出格式\n"

#: misc-utils/lsfd.c:1546
#, fuzzy
#| msgid " -u, --notruncate       don't truncate text in columns\n"
msgid " -u,      --notruncate        don't truncate text in columns\n"
msgstr " -u, --notruncate       不截断列中的文本\n"

#: misc-utils/lsfd.c:1547
#, fuzzy
#| msgid " -p, --pid <pid>...     act on these already running processes\n"
msgid " -p,      --pid  <pid(s)>     collect information only specified processes\n"
msgstr " -p, --pid <pid>...     对这些已运行的进程操作\n"

#: misc-utils/lsfd.c:1548
msgid " -i[4|6], --inet[=4|6]        list only IPv4 and/or IPv6 sockets\n"
msgstr ""

#: misc-utils/lsfd.c:1549
msgid " -Q,      --filter <expr>     apply display filter\n"
msgstr ""

#: misc-utils/lsfd.c:1550
msgid "          --debug-filter      dump the internal data structure of filter and exit\n"
msgstr ""

#: misc-utils/lsfd.c:1551
#, fuzzy
#| msgid " --default                         use default terminal settings\n"
msgid ""
" -C,      --counter <name>:<expr>\n"
"                              define custom counter for --summary output\n"
msgstr " --default                         使用默认终端设置\n"

#: misc-utils/lsfd.c:1553
msgid "          --dump-counters     dump counter definitions\n"
msgstr ""

#: misc-utils/lsfd.c:1554
msgid "          --summary[=<when>]  print summary information (only, append, or never)\n"
msgstr ""

#: misc-utils/lsfd.c:1621
#, c-format
msgid "too short counter specification: -C/--counter %s"
msgstr ""

#: misc-utils/lsfd.c:1625 misc-utils/lsfd.c:1631
#, c-format
msgid "no name for counter: -C/--counter %s"
msgstr ""

#: misc-utils/lsfd.c:1635
#, c-format
msgid "empty counter expression given: -C/--counter %s"
msgstr ""

#: misc-utils/lsfd.c:1643
#, c-format
msgid "don't use `{' in the name of a counter: %s"
msgstr ""

#: misc-utils/lsfd.c:1664
msgid "failed in making filter for a counter: "
msgstr ""

#: misc-utils/lsfd.c:1732
#, fuzzy
#| msgid "failed to allocate output table"
msgid "failed to allocate summary table"
msgstr "分配输出表失败"

#: misc-utils/lsfd.c:1742
msgid "VALUE"
msgstr ""

#: misc-utils/lsfd.c:1744 misc-utils/lsfd.c:1750
#, fuzzy
#| msgid "failed to allocate output column"
msgid "failed to allocate summary column"
msgstr "分配输出列失败"

#: misc-utils/lsfd.c:1748
msgid "COUNTER"
msgstr ""

#: misc-utils/lsfd.c:1763 misc-utils/lsfd.c:1765 misc-utils/lsfd.c:1768
#, fuzzy
#| msgid "failed to add output data"
msgid "failed to add summary data"
msgstr "添加输出信息失败"

#: misc-utils/lsfd.c:1905
#, fuzzy, c-format
#| msgid "unknown argument: %s"
msgid "unknown -i/--inet argument: %s"
msgstr "未知参数：%s"

#: misc-utils/lsfd.c:1931 sys-utils/lsmem.c:641
msgid "unsupported --summary argument"
msgstr "不支持的 --summary 参数"

#: misc-utils/lsfd-file.c:311 misc-utils/namei.c:455 sys-utils/lsns.c:1486
msgid "failed to allocate UID cache"
msgstr "分配 UID 缓存失败"

#: misc-utils/lsfd-filter.c:417
#, c-format
msgid "error: string literal is not terminated: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:511
#, c-format
msgid "error: unbalanced parenthesis: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:560 misc-utils/lsfd-filter.c:570
#: misc-utils/lsfd-filter.c:580
#, fuzzy, c-format
#| msgid "input error: unexpected character %c after %s field"
msgid "error: unexpected character %c after ="
msgstr "输入错误：%2$s 字段后出现异常字符 %1$c"

#: misc-utils/lsfd-filter.c:641
#, fuzzy, c-format
#| msgid "%s: failed to get partition number"
msgid "error: failed to convert input to number"
msgstr "%s：获取分区号失败"

#: misc-utils/lsfd-filter.c:645
#, fuzzy, c-format
#| msgid "input error: unexpected character %c after %s field"
msgid "error: unexpected character %c"
msgstr "输入错误：%2$s 字段后出现异常字符 %1$c"

#: misc-utils/lsfd-filter.c:700
#, fuzzy, c-format
#| msgid "input error: unexpected character %c after %s field"
msgid "error: unexpected token: %s after %s"
msgstr "输入错误：%2$s 字段后出现异常字符 %1$c"

#: misc-utils/lsfd-filter.c:711
#, c-format
msgid "error: empty left side expression: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:726
#, fuzzy, c-format
#| msgid "error writing sector %lu on %s"
msgid "error: no such column: %s"
msgstr "写 %2$s 上的 %1$lu 扇区出错"

#: misc-utils/lsfd-filter.c:737
#, c-format
msgid "error: cannot add a column to table: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:759
#, fuzzy, c-format
#| msgid "internal error: unsupported dialog type %d"
msgid "error: unsupported column data type: %d, column: %s"
msgstr "内部错误：不支持的对话类型 %d"

#: misc-utils/lsfd-filter.c:804 misc-utils/lsfd-filter.c:834
#, c-format
msgid "error: empty right side expression: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:874
#, fuzzy
#| msgid "could not compile regular expression %s: %s"
msgid "error: empty filter expression"
msgstr "无法编译正则表达式 %s：%s"

#: misc-utils/lsfd-filter.c:975
#, fuzzy, c-format
#| msgid "unexpected end of file on %s"
msgid "unexpected type in filter application: %s"
msgstr "%s 上的文件结尾异常"

#: misc-utils/lsfd-filter.c:1076
#, fuzzy, c-format
#| msgid "input error: unexpected character %c after %s field"
msgid "error: unexpected operand type %s for: %s"
msgstr "输入错误：%2$s 字段后出现异常字符 %1$c"

#: misc-utils/lsfd-filter.c:1199 misc-utils/lsfd-filter.c:1232
#: misc-utils/lsfd-filter.c:1254
#, fuzzy, c-format
#| msgid "input error: unexpected character %c after %s field"
msgid "error: unexpected left operand type %s for: %s"
msgstr "输入错误：%2$s 字段后出现异常字符 %1$c"

#: misc-utils/lsfd-filter.c:1207 misc-utils/lsfd-filter.c:1240
#: misc-utils/lsfd-filter.c:1262
#, fuzzy, c-format
#| msgid "input error: unexpected character %c after %s field"
msgid "error: unexpected right operand type %s for: %s"
msgstr "输入错误：%2$s 字段后出现异常字符 %1$c"

#: misc-utils/lsfd-filter.c:1269
#, c-format
msgid "error: string literal is expected as right operand for: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:1285
#, fuzzy, c-format
#| msgid "could not compile regular expression %s: %s"
msgid "error: could not compile regular expression %s: %s"
msgstr "无法编译正则表达式 %s：%s"

#: misc-utils/lsfd-filter.c:1321
msgid "error: unbalanced parenthesis: ("
msgstr ""

#: misc-utils/lsfd-filter.c:1327
#, c-format
msgid "error: garbage at the end of expression: %s"
msgstr ""

#: misc-utils/lsfd-filter.c:1333
#, c-format
msgid "error: bool expression is expected: %s"
msgstr ""

#: misc-utils/lsfd.h:232
#, fuzzy
#| msgid "failed to allocate memory: %m"
msgid "failed to allocate memory for string"
msgstr "分配内存失败：%m"

#: misc-utils/lsfd-sock-xinfo.c:228
#, fuzzy
#| msgid "failed to allocate output column"
msgid "failed to alloc path context for /var/run/netns"
msgstr "分配输出列失败"

#: misc-utils/lslocks.c:75
msgid "command of the process holding the lock"
msgstr "持有锁的进程命令"

#: misc-utils/lslocks.c:76
msgid "PID of the process holding the lock"
msgstr "持有锁的进程 PID"

#: misc-utils/lslocks.c:77
msgid "kind of lock"
msgstr "锁的类型"

#: misc-utils/lslocks.c:78
msgid "size of the lock"
msgstr "锁的大小"

#: misc-utils/lslocks.c:81
msgid "lock access mode"
msgstr "锁访问模式"

#: misc-utils/lslocks.c:82
msgid "mandatory state of the lock: 0 (none), 1 (set)"
msgstr "锁的强制(mandatory)状态：0(未设置)，1(设置)"

#: misc-utils/lslocks.c:83
msgid "relative byte offset of the lock"
msgstr "锁的相对字节偏移量"

#: misc-utils/lslocks.c:84
msgid "ending offset of the lock"
msgstr "锁的末尾偏移量"

#: misc-utils/lslocks.c:85
msgid "path of the locked file"
msgstr "锁定文件的路径"

#: misc-utils/lslocks.c:86
msgid "PID of the process blocking the lock"
msgstr "阻塞锁的进程的 PID"

#: misc-utils/lslocks.c:234
#, fuzzy, c-format
#| msgid "failed to parse %s"
msgid "failed to parse '%s'"
msgstr "解析 %s 失败"

#: misc-utils/lslocks.c:266
msgid "failed to parse ID"
msgstr "解析 ID 失败"

#: misc-utils/lslocks.c:288 misc-utils/uuidd.c:800 misc-utils/waitpid.c:57
#: sys-utils/nsenter.c:299
msgid "failed to parse pid"
msgstr "解析 pid 失败"

#: misc-utils/lslocks.c:294
msgid "(undefined)"
msgstr ""

#: misc-utils/lslocks.c:303
msgid "failed to parse start"
msgstr "解析 起点 失败"

#: misc-utils/lslocks.c:310
msgid "failed to parse end"
msgstr "解析 终点 失败"

#: misc-utils/lslocks.c:548
msgid "List local system locks.\n"
msgstr "列出本地系统锁。\n"

#: misc-utils/lslocks.c:551
#, fuzzy
#| msgid " -b, --bytes              print SIZE in bytes rather than in human readable format\n"
msgid " -b, --bytes            print SIZE in bytes rather than in human readable format\n"
msgstr " -b, --bytes              以字节为打印 SIZE，而非易读格式\n"

#: misc-utils/lslocks.c:553
msgid " -i, --noinaccessible   ignore locks without read permissions\n"
msgstr " -i, --noinaccessible   忽略没有读权限的锁\n"

#: misc-utils/lslocks.c:554 sys-utils/lsns.c:1293 sys-utils/rfkill.c:640
msgid " -n, --noheadings       don't print headings\n"
msgstr " -n, --noheadings       不打印标题\n"

#: misc-utils/lslocks.c:555 sys-utils/lsns.c:1294 sys-utils/rfkill.c:641
msgid " -o, --output <list>    define which output columns to use\n"
msgstr " -o, --output <list>    定义使用哪个输出列\n"

#: misc-utils/lslocks.c:556 sys-utils/lsns.c:1295 sys-utils/rfkill.c:642
msgid "     --output-all       output all columns\n"
msgstr "     --output-all       输出所有列\n"

#: misc-utils/lslocks.c:557
msgid " -p, --pid <pid>        display only locks held by this process\n"
msgstr " -p, --pid <pid>        只显示由指定进程持有的锁\n"

#: misc-utils/lslocks.c:558 sys-utils/lsns.c:1298 sys-utils/rfkill.c:643
msgid " -r, --raw              use the raw output format\n"
msgstr " -r, --raw              使用原生输出格式\n"

#: misc-utils/lslocks.c:623 schedutils/chrt.c:413 schedutils/ionice.c:179
#: schedutils/taskset.c:190 schedutils/uclampset.c:257 sys-utils/choom.c:102
#: sys-utils/lsns.c:1388 sys-utils/prlimit.c:604
msgid "invalid PID argument"
msgstr "无效的 PID 参数"

#: misc-utils/mcookie.c:86
msgid "Generate magic cookies for xauth.\n"
msgstr "为 xauth 生成 magic cookies。\n"

#: misc-utils/mcookie.c:89
msgid " -f, --file <file>     use file as a cookie seed\n"
msgstr " -f, --file <文件>     用指定文件作为 cookie 种子\n"

#: misc-utils/mcookie.c:90
msgid " -m, --max-size <num>  limit how much is read from seed files\n"
msgstr " -m, --max-size <数字> 限制从种子文件读取的大小\n"

#: misc-utils/mcookie.c:91
msgid " -v, --verbose         explain what is being done\n"
msgstr " -v, --verbose         解释正在进行的操作\n"

#: misc-utils/mcookie.c:97 misc-utils/wipefs.c:656 sys-utils/blkdiscard.c:111
#: sys-utils/fallocate.c:107 sys-utils/fstrim.c:475
msgid "<num>"
msgstr ""

#: misc-utils/mcookie.c:124
#, c-format
msgid "Got %zu byte from %s\n"
msgid_plural "Got %zu bytes from %s\n"
msgstr[0] "从 %2$s 获得 %1$zu 字节\n"

#: misc-utils/mcookie.c:129
#, c-format
msgid "closing %s failed"
msgstr "关闭 %s 失败"

#: misc-utils/mcookie.c:168 sys-utils/blkdiscard.c:204 sys-utils/fstrim.c:542
#: text-utils/hexdump.c:124
msgid "failed to parse length"
msgstr "解析长度失败"

#: misc-utils/mcookie.c:181
msgid "--max-size ignored when used without --file"
msgstr "不带 --file 时忽略 --max-size"

#: misc-utils/mcookie.c:190
#, c-format
msgid "Got %d byte from %s\n"
msgid_plural "Got %d bytes from %s\n"
msgstr[0] "从 %2$s 获取到 %1$d 字节\n"

#: misc-utils/namei.c:101
#, c-format
msgid "failed to read symlink: %s"
msgstr "读符号链接失败：%s"

#: misc-utils/namei.c:359
#, c-format
msgid " %s [options] <pathname>...\n"
msgstr " %s [选项] <路径名> ...\n"

#: misc-utils/namei.c:362
msgid "Follow a pathname until a terminal point is found.\n"
msgstr "沿路径寻找，直到某个终止点为止。\n"

#: misc-utils/namei.c:366
#, fuzzy
#| msgid ""
#| " -h, --help          displays this help text\n"
#| " -V, --version       output version information and exit\n"
#| " -x, --mountpoints   show mount point directories with a 'D'\n"
#| " -m, --modes         show the mode bits of each file\n"
#| " -o, --owners        show owner and group name of each file\n"
#| " -l, --long          use a long listing format (-m -o -v) \n"
#| " -n, --nosymlinks    don't follow symlinks\n"
#| " -v, --vertical      vertical align of modes and owners\n"
msgid ""
" -x, --mountpoints   show mount point directories with a 'D'\n"
" -m, --modes         show the mode bits of each file\n"
" -o, --owners        show owner and group name of each file\n"
" -l, --long          use a long listing format (-m -o -v) \n"
" -n, --nosymlinks    don't follow symlinks\n"
" -v, --vertical      vertical align of modes and owners\n"
msgstr ""
" -h, --help          显示此帮助文字\n"
" -V, --version       输出版本信息并退出\n"
" -x, --mountpoints   用“D”显示挂载点目录\n"
" -m, --modes         显示每个文件的模式位\n"
" -o, --owners        显示每个文件的拥有者和组名\n"
" -l, --long          使用长列表格式 (-m -o -v) \n"
" -n, --nosymlinks    不显示符号链接\n"
" -v, --vertical      竖直对齐 模式 和 拥有者\n"

#: misc-utils/namei.c:373
#, fuzzy
#| msgid " -R, --submounts        print all submounts for the matching filesystems\n"
msgid " -Z, --context       print any security context of each file \n"
msgstr " -R, --submounts        打印匹配文件系统的所有子挂载(submount)\n"

#: misc-utils/namei.c:449
msgid "pathname argument is missing"
msgstr "缺少 路径名 参数"

#: misc-utils/namei.c:458
msgid "failed to allocate GID cache"
msgstr "分配 GID 缓存失败"

#: misc-utils/namei.c:480
#, c-format
msgid "%s: exceeded limit of symlinks"
msgstr "%s：超过了符号链接限制"

#: misc-utils/pipesz.c:65
#, fuzzy, c-format
#| msgid " %s [options] -u <user> <command>\n"
msgid " %s [options] [--set <size>] [--] [command]\n"
msgstr " %s [选项] -u <用户> <命令>\n"

#: misc-utils/pipesz.c:66
#, fuzzy, c-format
#| msgid " %s [options]\n"
msgid " %s [options] --get\n"
msgstr " %s [选项]\n"

#. TRANSLATORS: 'command' refers to a program argument
#: misc-utils/pipesz.c:70
msgid "Set or examine pipe buffer sizes and optionally execute command."
msgstr ""

#: misc-utils/pipesz.c:73
#, fuzzy
#| msgid " -t, --ignore           ignore failures\n"
msgid " -g, --get          examine pipe buffers"
msgstr " -t, --ignore           忽略失败\n"

#: misc-utils/pipesz.c:76
#, fuzzy, c-format
#| msgid ""
#| " -A, --adjfile <file>     specifies the path to the adjust file\n"
#| "                            the default is %s\n"
msgid ""
" -s, --set <size>   set pipe buffer sizes\n"
"                      size defaults to %s\n"
msgstr ""
" -A, --adjfile <文件>     指定 adjust 文件的路径\n"
"                            默认为 %s\n"

#: misc-utils/pipesz.c:81
#, fuzzy
#| msgid " -p, --pid <path>        path to pid file\n"
msgid " -f, --file <path>  act on a file"
msgstr " -p, --pid <路径>        pid 文件路径\n"

#: misc-utils/pipesz.c:82
#, fuzzy
#| msgid " -f, --file <file>        log the contents of this file\n"
msgid " -n, --fd <num>     act on a file descriptor"
msgstr " -f, --file <文件>       记录指定文件的内容\n"

#: misc-utils/pipesz.c:83
#, fuzzy
#| msgid " -s, --symlink       act on the target of symlinks\n"
msgid " -i, --stdin        act on standard input"
msgstr " -s, --symlink       在符号链接的目标上执行操作\n"

#: misc-utils/pipesz.c:84
#, fuzzy
#| msgid " -o, --output <file>  write to file instead of standard output\n"
msgid " -o, --stdout       act on standard output"
msgstr " -o, --output <文件>  写入文件而非标准输出\n"

#: misc-utils/pipesz.c:85
#, fuzzy
#| msgid " -s, --stderr             output message to standard error as well\n"
msgid " -e, --stderr       act on standard error"
msgstr " -s, --stderr             也向标准错误输出消息\n"

#: misc-utils/pipesz.c:88
#, fuzzy
#| msgid " -c, --creator            show creator and owner\n"
msgid " -c, --check        do not continue after an error"
msgstr " -c, --creator            显示创建者和拥有者\n"

#: misc-utils/pipesz.c:89
#, fuzzy
#| msgid " -q, --quiet             suppress 'not mounted' error messages\n"
msgid " -q, --quiet        do not warn of non-fatal errors"
msgstr " -q, --quiet             不要输出“未挂载”错误信息\n"

#: misc-utils/pipesz.c:90
#, fuzzy
#| msgid " -v, --verbose      verbose output\n"
msgid " -v, --verbose      provide detailed output"
msgstr " -v, --verbose      详尽输出\n"

#. TRANSLATORS: '%s' refers to a file
#: misc-utils/pipesz.c:111
#, fuzzy, c-format
#| msgid "cannot get size of %s"
msgid "cannot get pipe buffer size of %s"
msgstr "无法获得 %s 的大小"

#. TRANSLATORS: '%s' refers to a file
#: misc-utils/pipesz.c:131
#, fuzzy, c-format
#| msgid "cannot get size of %s"
msgid "cannot set pipe buffer size of %s"
msgstr "无法获得 %s 的大小"

#. TRANSLATORS: '%s' refers to a file, '%d' to a buffer size in bytes
#: misc-utils/pipesz.c:134
#, c-format
msgid "%s pipe buffer size set to %d"
msgstr ""

#. TRANSLATORS: '%s' refers to a system file
#: misc-utils/pipesz.c:185 misc-utils/pipesz.c:191
#, fuzzy, c-format
#| msgid "cannot update %s"
msgid "cannot parse %s"
msgstr "无法更新 %s"

#: misc-utils/pipesz.c:288
msgid "cannot specify a command with --get"
msgstr ""

#. TRANSLATORS: a column that contains the names of files that are unix pipes
#: misc-utils/pipesz.c:294
msgid "pipe"
msgstr ""

#. TRANSLATORS: a column that contains buffer sizes in bytes
#: misc-utils/pipesz.c:296 sys-utils/ipcs.c:303 sys-utils/ipcs.c:528
msgid "size"
msgstr "大小"

#. TRANSLATORS: a column that contains an amount of data which has not been used by a program
#: misc-utils/pipesz.c:298
#, fuzzy
#| msgid ", ready"
msgid "unread"
msgstr "，就绪"

#: misc-utils/pipesz.c:311
#, fuzzy
#| msgid "mount: type specified twice"
msgid "using last specified size"
msgstr "mount：类型指定了两次"

#: misc-utils/rename.c:117
#, c-format
msgid "%s: overwrite `%s'? "
msgstr ""

#: misc-utils/rename.c:159 misc-utils/rename.c:224
#, c-format
msgid "%s: not accessible"
msgstr "%s：不可访问"

#: misc-utils/rename.c:168
#, c-format
msgid "%s: not a symbolic link"
msgstr "%s：不是符号链接"

#: misc-utils/rename.c:175
#, c-format
msgid "%s: readlink failed"
msgstr "%s：readlink 失败"

#: misc-utils/rename.c:191
#, c-format
msgid "Skipping existing link: `%s' -> `%s'\n"
msgstr "跳过已存在的链接：“%s”->“%s”\n"

#: misc-utils/rename.c:197
#, c-format
msgid "%s: unlink failed"
msgstr "%s：unlink 失败"

#: misc-utils/rename.c:201
#, c-format
msgid "%s: symlinking to %s failed"
msgstr "%s：符号链接到 %s 失败"

#: misc-utils/rename.c:240
#, c-format
msgid "Skipping existing file: `%s'\n"
msgstr "跳过已存在的文件：“%s”\n"

#: misc-utils/rename.c:244
#, c-format
msgid "%s: rename to %s failed"
msgstr "%s：重命名为 %s 失败"

#: misc-utils/rename.c:258
#, c-format
msgid " %s [options] <expression> <replacement> <file>...\n"
msgstr " %s [选项] <表达式> <替换> <文件>...\n"

#: misc-utils/rename.c:262
msgid "Rename files.\n"
msgstr "重命名文件。\n"

#: misc-utils/rename.c:265
msgid " -v, --verbose       explain what is being done\n"
msgstr " -v, --verbose       解释正在进行的操作\n"

#: misc-utils/rename.c:266
msgid " -s, --symlink       act on the target of symlinks\n"
msgstr " -s, --symlink       在符号链接的目标上执行操作\n"

#: misc-utils/rename.c:267
msgid " -n, --no-act        do not make any changes\n"
msgstr " -n, --no-act        不要进行任何修改\n"

#: misc-utils/rename.c:268
#, fuzzy
#| msgid " -a, --all            print all devices\n"
msgid " -a, --all           replace all occurrences\n"
msgstr " -a, --all            打印所有设备\n"

#: misc-utils/rename.c:269
#, fuzzy
#| msgid " -a, --hostlast       display hostnames in the last column\n"
msgid " -l, --last          replace only the last occurrence\n"
msgstr " -a, --hostlast       最后一列显示主机名\n"

#: misc-utils/rename.c:270
msgid " -o, --no-overwrite  don't overwrite existing files\n"
msgstr " -o, --no-overwrite  不要覆写已存在的文件\n"

#: misc-utils/rename.c:271
msgid " -i, --interactive   prompt before overwrite\n"
msgstr " -i, --interactive   覆写之前进行提示\n"

#: misc-utils/rename.c:361
msgid "failed to get terminal attributes"
msgstr "取终端属性失败"

#: misc-utils/uuidd.c:99
msgid "A daemon for generating UUIDs.\n"
msgstr "一个用于生成 UUID 的守护进程。\n"

#: misc-utils/uuidd.c:101
msgid " -p, --pid <path>        path to pid file\n"
msgstr " -p, --pid <路径>        pid 文件路径\n"

#: misc-utils/uuidd.c:102
msgid " -s, --socket <path>     path to socket\n"
msgstr " -s, --socket <路径>     套接字路径\n"

#: misc-utils/uuidd.c:103
msgid " -T, --timeout <sec>     specify inactivity timeout\n"
msgstr " -T, --timeout <秒>    指定无活动超时\n"

#: misc-utils/uuidd.c:104
msgid " -k, --kill              kill running daemon\n"
msgstr " -k, --kill              杀死运行中的守护进程\n"

#: misc-utils/uuidd.c:105
msgid " -r, --random            test random-based generation\n"
msgstr " -r, --random            测试基于随机数的生成方式\n"

#: misc-utils/uuidd.c:106
msgid " -t, --time              test time-based generation\n"
msgstr " -t, --time              测试基于时间的生成方式\n"

#: misc-utils/uuidd.c:107
msgid " -n, --uuids <num>       request number of uuids\n"
msgstr " -n, --uuids <数值>       请求指定数量的 uuid\n"

#: misc-utils/uuidd.c:108
msgid " -P, --no-pid            do not create pid file\n"
msgstr " -P, --no-pid            不创建 pid 文件\n"

#: misc-utils/uuidd.c:109
msgid " -F, --no-fork           do not daemonize using double-fork\n"
msgstr " -F, --no-fork           不使用双 fork 变成守护进程\n"

#: misc-utils/uuidd.c:110
msgid " -S, --socket-activation do not create listening socket\n"
msgstr " -S, --socket-activation 不创建侦听套接字\n"

#: misc-utils/uuidd.c:111
msgid " -C, --cont-clock[=<NUM>[hd]]\n"
msgstr ""

#: misc-utils/uuidd.c:112
#, fuzzy
#| msgid " --help                            display this help and exit\n"
msgid "                         activate continuous clock handling\n"
msgstr " --help                            显示此帮助并退出\n"

#: misc-utils/uuidd.c:113
msgid " -d, --debug             run in debugging mode\n"
msgstr " -d, --debug             以调试模式运行\n"

#: misc-utils/uuidd.c:114
msgid " -q, --quiet             turn on quiet mode\n"
msgstr " -q, --quiet             开启安静模式\n"

#: misc-utils/uuidd.c:146
msgid "bad arguments"
msgstr "参数错误"

#: misc-utils/uuidd.c:153
msgid "socket"
msgstr "套接字"

#: misc-utils/uuidd.c:164
msgid "connect"
msgstr "连接"

#: misc-utils/uuidd.c:184
msgid "write"
msgstr "写"

#: misc-utils/uuidd.c:192
msgid "read count"
msgstr "读计数"

#: misc-utils/uuidd.c:198
msgid "bad response length"
msgstr "响应长度错误"

#: misc-utils/uuidd.c:249
#, c-format
msgid "cannot lock %s"
msgstr "无法锁定 %s"

#: misc-utils/uuidd.c:274
msgid "couldn't create unix stream socket"
msgstr "无法创建 unix 流套接字"

#: misc-utils/uuidd.c:299
#, c-format
msgid "couldn't bind unix socket %s"
msgstr "无法绑定 unix 套接字 %s"

#: misc-utils/uuidd.c:326
msgid "receiving signal failed"
msgstr "接收信号失败"

#: misc-utils/uuidd.c:341
msgid "timed out"
msgstr "已超时"

#: misc-utils/uuidd.c:377 sys-utils/flock.c:276
msgid "cannot set up timer"
msgstr "无法设置定时器"

#: misc-utils/uuidd.c:385
#, c-format
msgid "uuidd daemon is already running at pid %s"
msgstr "uuidd 守护进程已运行，pid 为 %s"

#: misc-utils/uuidd.c:394
#, c-format
msgid "couldn't listen on unix socket %s"
msgstr "无法侦听 unix 套接字 %s"

#: misc-utils/uuidd.c:404
#, c-format
msgid "could not truncate file: %s"
msgstr "无法截短文件：%s"

#: misc-utils/uuidd.c:418
msgid "sd_listen_fds() failed"
msgstr "sd_listen_fds() 失败"

#: misc-utils/uuidd.c:421
msgid "no file descriptors received, check systemctl status uuidd.socket"
msgstr "没有收到文件描述符，请检查 systemctl 状态 uuidd.socket"

#: misc-utils/uuidd.c:424
msgid "too many file descriptors received, check uuidd.socket"
msgstr "收到太多文件描述符，请检查 uuidd.socket"

#: misc-utils/uuidd.c:450
#, c-format
msgid "max_clock_offset = %u sec\n"
msgstr ""

#: misc-utils/uuidd.c:461 text-utils/more.c:1367
msgid "poll failed"
msgstr "轮询失败"

#: misc-utils/uuidd.c:466
#, c-format
msgid "timeout [%d sec]\n"
msgstr "超时 [%d 秒]\n"

#: misc-utils/uuidd.c:483 sys-utils/irqtop.c:228 sys-utils/irqtop.c:231
#: sys-utils/irqtop.c:248 term-utils/setterm.c:920 text-utils/column.c:616
#: text-utils/column.c:646
msgid "read failed"
msgstr "read 失败"

#: misc-utils/uuidd.c:485
#, c-format
msgid "error reading from client, len = %d"
msgstr "从客户端读取出错，长度 = %d"

#: misc-utils/uuidd.c:494
#, c-format
msgid "operation %d, incoming num = %d\n"
msgstr "操作 %d，接收数 = %d\n"

#: misc-utils/uuidd.c:497
#, c-format
msgid "operation %d\n"
msgstr "操作 %d\n"

#: misc-utils/uuidd.c:512 misc-utils/uuidd.c:533
#, fuzzy
#| msgid "failed to parse logical block size"
msgid "failed to open/lock clock counter"
msgstr "解析逻辑块大小失败"

#: misc-utils/uuidd.c:515
#, c-format
msgid "Generated time UUID: %s\n"
msgstr "已生成时间 UUID：%s\n"

#: misc-utils/uuidd.c:525
#, c-format
msgid "Generated random UUID: %s\n"
msgstr "已生成随机 UUID：%s\n"

#: misc-utils/uuidd.c:536
#, c-format
msgid "Generated time UUID %s and %d following\n"
msgid_plural "Generated time UUID %s and %d following\n"
msgstr[0] "已生成时间 UUID %s 和后续 %d 个\n"

#: misc-utils/uuidd.c:557
#, c-format
msgid "Generated %d UUID:\n"
msgid_plural "Generated %d UUIDs:\n"
msgstr[0] "已生成 %d 个 UUID：\n"

#: misc-utils/uuidd.c:569
#, c-format
msgid "Invalid operation %d\n"
msgstr "无效操作 %d\n"

#: misc-utils/uuidd.c:581
#, c-format
msgid "Unexpected reply length from server %d"
msgstr "服务器 %d 响应长度异常"

#: misc-utils/uuidd.c:601
#, fuzzy
#| msgid "failed to parse column"
msgid "failed to parse --cont-clock/-C"
msgstr "解析列失败"

#: misc-utils/uuidd.c:652
msgid "failed to parse --uuids"
msgstr "解析 --uuids 失败"

#: misc-utils/uuidd.c:669
msgid "uuidd has been built without support for socket activation"
msgstr "uuidd 构建时没有添加套接字激活支持"

#: misc-utils/uuidd.c:688
msgid "failed to parse --timeout"
msgstr "解析 --timeout 失败"

#: misc-utils/uuidd.c:729
#, c-format
msgid "socket name too long: %s"
msgstr "套接字名称过长：%s"

#: misc-utils/uuidd.c:736
msgid "Both --socket-activation and --socket specified. Ignoring --socket."
msgstr "同时指定了 --socket-activation 和 --socket。将忽略 --socket"

#: misc-utils/uuidd.c:747 misc-utils/uuidd.c:782
#, c-format
msgid "error calling uuidd daemon (%s)"
msgstr "调用 uuidd 守护进程(%s)出错"

#: misc-utils/uuidd.c:748 misc-utils/uuidd.c:783
msgid "unexpected error"
msgstr "意外错误"

#: misc-utils/uuidd.c:756
#, c-format
msgid "%s and %d subsequent UUID\n"
msgid_plural "%s and %d subsequent UUIDs\n"
msgstr[0] "%s 和 %d 个后续 UUID\n"

#: misc-utils/uuidd.c:762
#, c-format
msgid "List of UUIDs:\n"
msgstr "UUID 列表：\n"

#: misc-utils/uuidd.c:804
#, c-format
msgid "couldn't kill uuidd running at pid %d"
msgstr "无法运行 pid 为 %d 的 uuidd"

#: misc-utils/uuidd.c:809
#, c-format
msgid "Killed uuidd running at pid %d.\n"
msgstr "已杀死运行 pid 为 %d 的 uuidd。\n"

#: misc-utils/uuidgen.c:29
msgid "Create a new UUID value.\n"
msgstr "创建新的 UUID 值。\n"

#: misc-utils/uuidgen.c:32
#, fuzzy
#| msgid " -r, --random            test random-based generation\n"
msgid " -r, --random        generate random-based uuid\n"
msgstr " -r, --random            测试基于随机数的生成方式\n"

#: misc-utils/uuidgen.c:33
msgid " -t, --time          generate time-based uuid\n"
msgstr " -t, --time          生成基于时间的 uuid\n"

#: misc-utils/uuidgen.c:34
msgid " -n, --namespace ns  generate hash-based uuid in this namespace\n"
msgstr ""

#: misc-utils/uuidgen.c:35
#, fuzzy, c-format
#| msgid " -a, --all            print all devices\n"
msgid "                       available namespaces: %s\n"
msgstr " -a, --all            打印所有设备\n"

#: misc-utils/uuidgen.c:36
msgid " -N, --name name     generate hash-based uuid from this name\n"
msgstr ""

#: misc-utils/uuidgen.c:37
msgid " -m, --md5           generate md5 hash\n"
msgstr " -m, --md5           生成 md5 散列\n"

#: misc-utils/uuidgen.c:38
msgid " -s, --sha1          generate sha1 hash\n"
msgstr " -s, --sha1          生成 sha1 散列\n"

#: misc-utils/uuidgen.c:39
#, fuzzy
#| msgid " -i, --invert           invert the sense of matching\n"
msgid " -x, --hex           interpret name as hex string\n"
msgstr " -i, --invert           反转搜索的匹配\n"

#: misc-utils/uuidgen.c:53
msgid "not a valid hex string"
msgstr "不是有效的十六进制字符串"

#: misc-utils/uuidgen.c:144
#, fuzzy
#| msgid "%s requires an argument"
msgid "--namespace requires --name argument"
msgstr "%s 需要一个参数"

#: misc-utils/uuidgen.c:148
#, fuzzy
#| msgid "--init-groups requires --ruid or --reuid"
msgid "--namespace requires --md5 or --sha1"
msgstr "--init-groups 需要 --ruid 或者 --reuid"

#: misc-utils/uuidgen.c:153
msgid "--name requires --namespace argument"
msgstr "--name 需要 --namespace 参数"

#: misc-utils/uuidgen.c:157
#, fuzzy
#| msgid "%s requires an argument"
msgid "--md5 or --sha1 requires --namespace argument"
msgstr "%s 需要一个参数"

#: misc-utils/uuidgen.c:182
#, c-format
msgid "unknown namespace alias: '%s'"
msgstr "未知的名字空间别名︰“%s”"

#: misc-utils/uuidgen.c:188
#, fuzzy, c-format
#| msgid "invalid id: %s"
msgid "invalid uuid for namespace: '%s'"
msgstr "无效 ID：%s"

#: misc-utils/uuidparse.c:76
msgid "unique identifier"
msgstr "惟一标识符"

#: misc-utils/uuidparse.c:77
#, fuzzy
#| msgid "partition name"
msgid "variant name"
msgstr "分区名"

#: misc-utils/uuidparse.c:78
msgid "type name"
msgstr "类型名称"

#: misc-utils/uuidparse.c:79
msgid "timestamp"
msgstr "时间戳"

#: misc-utils/uuidparse.c:97
#, c-format
msgid " %s [options] <uuid ...>\n"
msgstr " %s [选项] <uuid ...>\n"

#: misc-utils/uuidparse.c:100
msgid " -J, --json             use JSON output format"
msgstr " -J, --json              使用 JSON 输出格式"

#: misc-utils/uuidparse.c:101
#, fuzzy
#| msgid " -n, --noheadings       don't print headings\n"
msgid " -n, --noheadings       don't print headings"
msgstr " -n, --noheadings       不打印标题\n"

#: misc-utils/uuidparse.c:102
#, fuzzy
#| msgid " -o, --output <list>    the output columns to be shown\n"
msgid " -o, --output <list>    COLUMNS to display (see below)"
msgstr " -o, --output <列表>    要显示的列\n"

#: misc-utils/uuidparse.c:103
msgid " -r, --raw              use the raw output format"
msgstr " -r, --raw              使用原始输出格式"

#: misc-utils/uuidparse.c:172 misc-utils/uuidparse.c:191
#: misc-utils/uuidparse.c:222
msgid "invalid"
msgstr "无效"

#: misc-utils/uuidparse.c:186
msgid "other"
msgstr "其它"

#: misc-utils/uuidparse.c:197
msgid "nil"
msgstr ""

#: misc-utils/uuidparse.c:202
msgid "time-based"
msgstr "基于时间"

#: misc-utils/uuidparse.c:208
msgid "name-based"
msgstr "基于名称"

#: misc-utils/uuidparse.c:211
msgid "random"
msgstr "随机"

#: misc-utils/uuidparse.c:214
msgid "sha1-based"
msgstr "基于sha1"

#: misc-utils/uuidparse.c:267 misc-utils/wipefs.c:178
#: sys-utils/irq-common.c:156 sys-utils/irq-common.c:478 sys-utils/lscpu.c:990
#: sys-utils/lsns.c:1146 sys-utils/zramctl.c:505
msgid "failed to initialize output column"
msgstr "初始化输出列失败"

#: misc-utils/waitpid.c:70
#, c-format
msgid "PID %d has exited, skipping"
msgstr ""

#: misc-utils/waitpid.c:73
#, fuzzy, c-format
#| msgid "could not read: %s"
msgid "could not open pid %u"
msgstr "无法读取︰%s"

#: misc-utils/waitpid.c:92
#, fuzzy
#| msgid "cannot not create timerfd"
msgid "could not create timerfd"
msgstr "无法创建 timerfd"

#: misc-utils/waitpid.c:95
#, fuzzy
#| msgid "cannot set timerfd"
msgid "could not set timer"
msgstr "无法设置 timerfd"

#: misc-utils/waitpid.c:111
#, fuzzy
#| msgid "cannot not create timerfd"
msgid "could not add timerfd"
msgstr "无法创建 timerfd"

#: misc-utils/waitpid.c:121
#, fuzzy
#| msgid "could not read: %s"
msgid "could not add listener"
msgstr "无法读取︰%s"

#: misc-utils/waitpid.c:139
msgid "failure during wait"
msgstr ""

#: misc-utils/waitpid.c:143
#, c-format
msgid "Timeout expired\n"
msgstr ""

#: misc-utils/waitpid.c:147
#, c-format
msgid "PID %d finished\n"
msgstr ""

#: misc-utils/waitpid.c:160
#, fuzzy, c-format
#| msgid " %s [options] file...\n"
msgid " %s [options] pid...\n"
msgstr " %s [选项] 文件...\n"

#: misc-utils/waitpid.c:163
#, fuzzy
#| msgid " -v, --verbose            be more verbose\n"
msgid " -v, --verbose           be more verbose\n"
msgstr " -v, --verbose            更详尽\n"

#: misc-utils/waitpid.c:164
#, fuzzy
#| msgid " -t, --timeout <timeout> write timeout in seconds\n"
msgid " -t, --timeout=<timeout> wait at most timeout seconds\n"
msgstr " -t, --timeout <超时>    写超时(秒)\n"

#: misc-utils/waitpid.c:165
#, fuzzy
#| msgid " -a, --all            print all devices\n"
msgid " -e, --exited            allow exited PIDs\n"
msgstr " -a, --all            打印所有设备\n"

#: misc-utils/waitpid.c:166
#, fuzzy
#| msgid " -t, --streams <number>    number of compression streams\n"
msgid " -c, --count=<count>     number of process exits to wait for\n"
msgstr " -t, --streams <数字>      压缩流数量\n"

#: misc-utils/waitpid.c:204
#, fuzzy
#| msgid "failed to parse --timeout"
msgid "Could not parse timeout"
msgstr "解析 --timeout 失败"

#: misc-utils/waitpid.c:210
#, fuzzy
#| msgid "invalid block-count"
msgid "Invalid count"
msgstr "无效的块计数"

#: misc-utils/waitpid.c:237
#, fuzzy
#| msgid "no file specified"
msgid "no PIDs specified"
msgstr "未指定文件"

#: misc-utils/waitpid.c:241
#, c-format
msgid "can't want for %zu of %zu PIDs"
msgstr ""

#: misc-utils/waitpid.c:249
#, fuzzy
#| msgid "could not read: %s"
msgid "could not create epoll"
msgstr "无法读取︰%s"

#: misc-utils/whereis.c:205
#, c-format
msgid " %s [options] [-BMS <dir>... -f] <name>\n"
msgstr " %s [选项] [-BMS <dir>... -f] <名称>\n"

#: misc-utils/whereis.c:208
msgid "Locate the binary, source, and manual-page files for a command.\n"
msgstr "定位某个命令的二进制文件、源码和帮助页文件。\n"

#: misc-utils/whereis.c:211
msgid " -b         search only for binaries\n"
msgstr " -b         只搜索二进制文件\n"

#: misc-utils/whereis.c:212
msgid " -B <dirs>  define binaries lookup path\n"
msgstr " -B <目录>  定义二进制文件查找路径\n"

#: misc-utils/whereis.c:213
msgid " -m         search only for manuals and infos\n"
msgstr " -m         只搜索手册和信息\n"

#: misc-utils/whereis.c:214
msgid " -M <dirs>  define man and info lookup path\n"
msgstr " -M <目录>  定义 man 和 info 查找路径\n"

#: misc-utils/whereis.c:215
msgid " -s         search only for sources\n"
msgstr " -s         只搜索源代码\n"

#: misc-utils/whereis.c:216
msgid " -S <dirs>  define sources lookup path\n"
msgstr " -S <目录>  定义源代码查找路径\n"

#: misc-utils/whereis.c:217
msgid " -f         terminate <dirs> argument list\n"
msgstr " -f         终止 <目录> 参数列表\n"

#: misc-utils/whereis.c:218
msgid " -u         search for unusual entries\n"
msgstr " -u         搜索不常见记录\n"

#: misc-utils/whereis.c:219
#, fuzzy
#| msgid " -i, --invert           invert the sense of matching\n"
msgid " -g         interpret name as glob (pathnames pattern)\n"
msgstr " -i, --invert           反转搜索的匹配\n"

#: misc-utils/whereis.c:220
msgid " -l         output effective lookup paths\n"
msgstr " -l         输出有效查找路径\n"

#: misc-utils/whereis.c:670
msgid "option -f is missing"
msgstr "缺少 -f 选项"

#: misc-utils/wipefs.c:109
msgid "partition/filesystem UUID"
msgstr "分区/文件系统 UUID"

#: misc-utils/wipefs.c:111
msgid "magic string length"
msgstr ""

#: misc-utils/wipefs.c:112
msgid "superblok type"
msgstr "超级块类型"

#: misc-utils/wipefs.c:113
#, fuzzy
#| msgid "bad inode offset"
msgid "magic string offset"
msgstr "inode 偏移有误"

#: misc-utils/wipefs.c:114
msgid "type description"
msgstr "类型描述"

#: misc-utils/wipefs.c:115
msgid "block device name"
msgstr "块设备名称"

#: misc-utils/wipefs.c:310
msgid "partition-table"
msgstr "分区表"

#: misc-utils/wipefs.c:401
#, c-format
msgid "error: %s: probing initialization failed"
msgstr "错误：%s：探测初始化失败"

#: misc-utils/wipefs.c:452
#, c-format
msgid "%s: failed to erase %s magic string at offset 0x%08jx"
msgstr "%1$s：擦除位于偏移 0x%3$08jx 处的魔数字符串 %2$s 失败"

#: misc-utils/wipefs.c:458
#, c-format
msgid "%s: %zd byte was erased at offset 0x%08jx (%s): "
msgid_plural "%s: %zd bytes were erased at offset 0x%08jx (%s): "
msgstr[0] "%s：%zd 个字节已擦除，位置偏移为 0x%08jx (%s)："

#: misc-utils/wipefs.c:487
#, c-format
msgid "%s: failed to create a signature backup"
msgstr "%s：创建签名备份失败"

#: misc-utils/wipefs.c:513
#, c-format
msgid "%s: calling ioctl to re-read partition table: %m\n"
msgstr "%s：将调用 ioctl 来重新读分区表：%m\n"

#: misc-utils/wipefs.c:542
msgid "failed to create a signature backup, $HOME undefined"
msgstr "创建签名备份失败，未定义 $HOME"

#: misc-utils/wipefs.c:560
#, c-format
msgid "%s: ignoring nested \"%s\" partition table on non-whole disk device"
msgstr "%s：忽略 非整盘 设备上的嵌套分区表“%s”"

#: misc-utils/wipefs.c:589
#, c-format
msgid "%s: offset 0x%jx not found"
msgstr "%s：找不到偏移 0x%jx"

#: misc-utils/wipefs.c:594
msgid "Use the --force option to force erase."
msgstr "使用 --force 选项强制擦除。"

#: misc-utils/wipefs.c:597
#, fuzzy, c-format
#| msgid "%s: cannot fflush changes: %s"
msgid "%s: cannot flush modified buffers"
msgstr "%s：无法 fflush 更改：%s"

#: misc-utils/wipefs.c:636
msgid "Wipe signatures from a device."
msgstr "从设备擦除签名。"

#: misc-utils/wipefs.c:639
#, fuzzy
#| msgid " -a, --all            print all devices\n"
msgid " -a, --all           wipe all magic strings (BE CAREFUL!)"
msgstr " -a, --all            打印所有设备\n"

#: misc-utils/wipefs.c:640
#, fuzzy
#| msgid "failed to create a signature backup, $HOME undefined"
msgid " -b, --backup        create a signature backup in $HOME"
msgstr "创建签名备份失败，未定义 $HOME"

#: misc-utils/wipefs.c:641
msgid " -f, --force         force erasure"
msgstr " -f, --force         强制擦除"

#: misc-utils/wipefs.c:642
#, fuzzy
#| msgid " -n, --noheadings     don't print headings\n"
msgid " -i, --noheadings    don't print headings"
msgstr " -n, --noheadings     不打印标题\n"

#: misc-utils/wipefs.c:643
msgid " -J, --json          use JSON output format"
msgstr " -J, --json          使用 JSON 输出格式"

#: misc-utils/wipefs.c:644
#, fuzzy
#| msgid "     --no-act             do everything except the write the log\n"
msgid " -n, --no-act        do everything except the actual write() call"
msgstr "     --no-act             操作但不实际写入日志\n"

#: misc-utils/wipefs.c:645
#, fuzzy
#| msgid " -o, --offset <num>   offset for range operations, in bytes\n"
msgid " -o, --offset <num>  offset to erase, in bytes"
msgstr " -o, --offset <数字>  范围操作的偏移量(字节数)\n"

#: misc-utils/wipefs.c:646
msgid " -O, --output <list> COLUMNS to display (see below)"
msgstr ""

#: misc-utils/wipefs.c:647
#, fuzzy
#| msgid " -p, --parse[=<list>]    print out a parsable format\n"
msgid " -p, --parsable      print out in parsable instead of printable format"
msgstr " -p, --parse[=<列表>]    打印可解析格式\n"

#: misc-utils/wipefs.c:648
msgid " -q, --quiet         suppress output messages"
msgstr " -q, --quiet         禁止输出信息"

#: misc-utils/wipefs.c:649
#, fuzzy
#| msgid " -t, --types <list>     limit the set of filesystems by FS types\n"
msgid " -t, --types <list>  limit the set of filesystem, RAIDs or partition tables"
msgstr " -t, --types <列表>     根据文件系统类型限制文件系统集合\n"

#: misc-utils/wipefs.c:651
#, fuzzy, c-format
#| msgid "     --color[=<when>]  colorize messages (auto, always or never)\n"
msgid "     --lock[=<mode>] use exclusive device lock (%s, %s or %s)\n"
msgstr "     --color[=<时机>]  消息彩色显示(auto, always 或 never)\n"

#: misc-utils/wipefs.c:770
msgid "The --backup option is meaningless in this context"
msgstr "--backup 在此环境中无意义"

#: schedutils/chrt.c:60
msgid "Show or change the real-time scheduling attributes of a process.\n"
msgstr "显示或更改某个进程的实时调度属性。\n"

#: schedutils/chrt.c:62
msgid ""
"Set policy:\n"
" chrt [options] <priority> <command> [<arg>...]\n"
" chrt [options] --pid <priority> <pid>\n"
msgstr ""
"设置策略：\n"
" chrt [选项] <优先级> <命令> [<参数>...]\n"
" chrt [选项] --pid <优先级> <pid>\n"

#: schedutils/chrt.c:66
msgid ""
"Get policy:\n"
" chrt [options] -p <pid>\n"
msgstr ""
"获取策略\n"
" chrt [选项] -p <pid>\n"

#: schedutils/chrt.c:70
msgid "Policy options:\n"
msgstr "策略选项：\n"

#: schedutils/chrt.c:71
msgid " -b, --batch          set policy to SCHED_BATCH\n"
msgstr " -b, --batch          将策略设置为 SCHED_BATCH\n"

#: schedutils/chrt.c:72
msgid " -d, --deadline       set policy to SCHED_DEADLINE\n"
msgstr " -d, --deadline       将策略设置为 SCHED_DEADLINE\n"

#: schedutils/chrt.c:73
msgid " -f, --fifo           set policy to SCHED_FIFO\n"
msgstr " -f, --fifo           将策略设置为 SCHED_FIFO\n"

#: schedutils/chrt.c:74
msgid " -i, --idle           set policy to SCHED_IDLE\n"
msgstr " -i, --idle           将策略设置为 SCHED_IDLE\n"

#: schedutils/chrt.c:75
msgid " -o, --other          set policy to SCHED_OTHER\n"
msgstr " -o, --other          将策略设置为 SCHED_OTHER\n"

#: schedutils/chrt.c:76
msgid " -r, --rr             set policy to SCHED_RR (default)\n"
msgstr " -r, --rr             将策略设置为 SCHED_RR (默认)\n"

#: schedutils/chrt.c:79
msgid "Scheduling options:\n"
msgstr "调度选项：\n"

#: schedutils/chrt.c:80
#, fuzzy
#| msgid " -R, --reset-on-fork       set SCHED_RESET_ON_FORK for FIFO or RR\n"
msgid " -R, --reset-on-fork       set reset-on-fork flag\n"
msgstr " -R, --reset-on-fork       为 FIFO 或 RR 设置 SCHED_RESET_ON_FORK\n"

#: schedutils/chrt.c:81
msgid " -T, --sched-runtime <ns>  runtime parameter for DEADLINE\n"
msgstr " -T, --sched-runtime <ns>  DEADLINE 的运行时参数\n"

#: schedutils/chrt.c:82
msgid " -P, --sched-period <ns>   period parameter for DEADLINE\n"
msgstr " -P, --sched-period <ns>  DEADLINE 的周期参数\n"

#: schedutils/chrt.c:83
msgid " -D, --sched-deadline <ns> deadline parameter for DEADLINE\n"
msgstr " -D, --sched-deadline <ns> DEADLINE 的截止时间参数\n"

#: schedutils/chrt.c:86
msgid "Other options:\n"
msgstr "其他选项：\n"

#: schedutils/chrt.c:87 schedutils/uclampset.c:66
msgid " -a, --all-tasks      operate on all the tasks (threads) for a given pid\n"
msgstr " -a, --all-tasks      对指定 pid 的所有任务(线程) 操作\n"

#: schedutils/chrt.c:88
msgid " -m, --max            show min and max valid priorities\n"
msgstr " -m, --max            显示最小和最大有效优先级\n"

#: schedutils/chrt.c:89
msgid " -p, --pid            operate on existing given pid\n"
msgstr " -p, --pid            对指定且存在的 pid 操作\n"

#: schedutils/chrt.c:90 schedutils/uclampset.c:70
msgid " -v, --verbose        display status information\n"
msgstr " -v, --verbose        显示状态信息\n"

#: schedutils/chrt.c:153 schedutils/chrt.c:175
#, c-format
msgid "failed to get pid %d's policy"
msgstr "无法获得 pid %d 的策略"

#: schedutils/chrt.c:178
#, c-format
msgid "failed to get pid %d's attributes"
msgstr "获取 pid %d 的属性失败"

#: schedutils/chrt.c:188
#, c-format
msgid "pid %d's new scheduling policy: %s"
msgstr "pid “%d” 的新调度策略：%s"

#: schedutils/chrt.c:190
#, c-format
msgid "pid %d's current scheduling policy: %s"
msgstr "pid %d 当前的调度策略︰ %s"

#: schedutils/chrt.c:197
#, c-format
msgid "pid %d's new scheduling priority: %d\n"
msgstr "pid %d 的新调度策略：%d\n"

#: schedutils/chrt.c:199
#, c-format
msgid "pid %d's current scheduling priority: %d\n"
msgstr "pid %d 的当前调度优先级：%d\n"

#: schedutils/chrt.c:204
#, c-format
msgid "pid %d's new runtime/deadline/period parameters: %ju/%ju/%ju\n"
msgstr "pid %d 新的运行时/截止时间/周期参数︰ %ju/%ju/%ju\n"

#: schedutils/chrt.c:207
#, c-format
msgid "pid %d's current runtime/deadline/period parameters: %ju/%ju/%ju\n"
msgstr "pid %d 当前的运行时/截止时间/周期参数︰ %ju/%ju/%ju\n"

#: schedutils/chrt.c:227 schedutils/chrt.c:331 schedutils/chrt.c:339
#: schedutils/uclampset.c:142 schedutils/uclampset.c:184
msgid "cannot obtain the list of tasks"
msgstr "无法获取任务列表"

#: schedutils/chrt.c:257
#, c-format
msgid "%s min/max priority\t: %d/%d\n"
msgstr "%s 最小/最大优先级\t: %d/%d\n"

#: schedutils/chrt.c:260
#, c-format
msgid "%s not supported?\n"
msgstr "%s 不支持？ \n"

#: schedutils/chrt.c:335
#, c-format
msgid "failed to set tid %d's policy"
msgstr "设置 tid %d 策略失败"

#: schedutils/chrt.c:342
#, c-format
msgid "failed to set pid %d's policy"
msgstr "设置 pid %d 的策略失败"

#: schedutils/chrt.c:422
msgid "invalid runtime argument"
msgstr "无效的运行时参数"

#: schedutils/chrt.c:425
msgid "invalid period argument"
msgstr "无效的周期参数"

#: schedutils/chrt.c:428
msgid "invalid deadline argument"
msgstr "无效的截止时间参数"

#: schedutils/chrt.c:453
msgid "invalid priority argument"
msgstr "无效的 优先级 参数"

#: schedutils/chrt.c:457
msgid "--sched-{runtime,deadline,period} options are supported for SCHED_DEADLINE only"
msgstr "--sched-{runtime,deadline,period} 选项只支持 SCHED_DEADLINE"

#: schedutils/chrt.c:472
msgid "SCHED_DEADLINE is unsupported"
msgstr "不支持 SCHED_DEADLINE"

#: schedutils/chrt.c:479
#, c-format
msgid "unsupported priority value for the policy: %d: see --max for valid range"
msgstr "不支持此策略的优先级值：%d：查看 --max 了解有效范围"

#: schedutils/ionice.c:78
msgid "ioprio_get failed"
msgstr "ioprio_get 失败"

#: schedutils/ionice.c:87
#, c-format
msgid "%s: prio %lu\n"
msgstr "%s：优先级 %lu\n"

#: schedutils/ionice.c:100
msgid "ioprio_set failed"
msgstr "ioprio_set 失败"

#: schedutils/ionice.c:107
#, c-format
msgid ""
" %1$s [options] -p <pid>...\n"
" %1$s [options] -P <pgid>...\n"
" %1$s [options] -u <uid>...\n"
" %1$s [options] <command>\n"
msgstr ""
" %1$s [选项] -p <pid>...\n"
" %1$s [选项] -P <pgid>...\n"
" %1$s [选项] -u <uid>...\n"
" %1$s [选项] <命令>\n"

#: schedutils/ionice.c:113
msgid "Show or change the I/O-scheduling class and priority of a process.\n"
msgstr "设置或更改进程的 IO 调度类别和优先级。\n"

#: schedutils/ionice.c:116
msgid ""
" -c, --class <class>    name or number of scheduling class,\n"
"                          0: none, 1: realtime, 2: best-effort, 3: idle\n"
msgstr ""
" -c, --class <类别>    调度类别的名称或数值\n"
"                          0: 无, 1: 实时, 2: 尽力, 3: 空闲\n"

#: schedutils/ionice.c:118
msgid ""
" -n, --classdata <num>  priority (0..7) in the specified scheduling class,\n"
"                          only for the realtime and best-effort classes\n"
msgstr ""
" -n, --classdata <数字> 指定调度类别的优先级(0..7)，只针对\n"
"                          “实时”和“尽力”类别\n"

#: schedutils/ionice.c:120
msgid " -p, --pid <pid>...     act on these already running processes\n"
msgstr " -p, --pid <pid>...     对这些已运行的进程操作\n"

#: schedutils/ionice.c:121
msgid " -P, --pgid <pgrp>...   act on already running processes in these groups\n"
msgstr " -P, --pgid <pgrp>...   对这些组中已运行的进程操作\n"

#: schedutils/ionice.c:122
msgid " -t, --ignore           ignore failures\n"
msgstr " -t, --ignore           忽略失败\n"

#: schedutils/ionice.c:123
msgid " -u, --uid <uid>...     act on already running processes owned by these users\n"
msgstr " -u, --uid <uid>...     对属于这些用户的已运行进程操作\n"

#: schedutils/ionice.c:159
msgid "invalid class data argument"
msgstr "无效的类别数据参数"

#: schedutils/ionice.c:165
msgid "invalid class argument"
msgstr "无效的类别参数"

#: schedutils/ionice.c:170
#, c-format
msgid "unknown scheduling class: '%s'"
msgstr "未知的调度类别：“%s”"

#: schedutils/ionice.c:178 schedutils/ionice.c:186 schedutils/ionice.c:194
msgid "can handle only one of pid, pgid or uid at once"
msgstr "无法一次只处理一个 pid、pgid 或 uid"

#: schedutils/ionice.c:187
msgid "invalid PGID argument"
msgstr "无效的 PGID 参数"

#: schedutils/ionice.c:195
msgid "invalid UID argument"
msgstr "无效的 UID 参数"

#: schedutils/ionice.c:214
msgid "ignoring given class data for none class"
msgstr "将忽略为“无”类别指定的类别数据"

#: schedutils/ionice.c:222
msgid "ignoring given class data for idle class"
msgstr "将忽略为“空闲”类别指定的类别数据"

#: schedutils/ionice.c:227
#, c-format
msgid "unknown prio class %d"
msgstr "未知的优先级类别 %d"

#: schedutils/taskset.c:56
#, c-format
msgid ""
"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
"\n"
msgstr ""
"用法：%s [选项] [掩码 | cpu列表] [pid|命令 [参数...]]\n"
"\n"

#: schedutils/taskset.c:60
msgid "Show or change the CPU affinity of a process.\n"
msgstr "显示或更改某个进程的 CPU 亲和力。\n"

#: schedutils/taskset.c:64
#, c-format
msgid ""
"Options:\n"
" -a, --all-tasks         operate on all the tasks (threads) for a given pid\n"
" -p, --pid               operate on existing given pid\n"
" -c, --cpu-list          display and specify cpus in list format\n"
msgstr ""
"选项：\n"
" -a, --all-tasks         在给定 pid 的所有任务(线程)上操作\n"
" -p, --pid               在存在的给定 pid 上操作\n"
" -c, --cpu-list          以列表格式显示和指定 CPU\n"

#: schedutils/taskset.c:73
#, c-format
msgid ""
"The default behavior is to run a new command:\n"
"    %1$s 03 sshd -b 1024\n"
"You can retrieve the mask of an existing task:\n"
"    %1$s -p 700\n"
"Or set it:\n"
"    %1$s -p 03 700\n"
"List format uses a comma-separated list instead of a mask:\n"
"    %1$s -pc 0,3,7-11 700\n"
"Ranges in list format can take a stride argument:\n"
"    e.g. 0-31:2 is equivalent to mask 0x55555555\n"
msgstr ""
"默认行为是运行一条新命令：\n"
"    %1$s 03 sshd -b 1024\n"
"您可以获取现有任务的掩码：\n"
"    %1$s -p 700\n"
"或设置掩码：\n"
"    %1$s -p 03 700\n"
"使用逗号分隔的列表格式而不是掩码：\n"
"    %1$s -pc 0,3,7-11 700\n"
"列表格式中的范围可以带一个跨度参数：\n"
"    例如 0-31:2 与掩码 0x55555555 等效\n"

#: schedutils/taskset.c:95
#, c-format
msgid "pid %d's new affinity list: %s\n"
msgstr "pid %d 的新亲和力列表：%s\n"

#: schedutils/taskset.c:96
#, c-format
msgid "pid %d's current affinity list: %s\n"
msgstr "pid %d 的当前亲和力列表：%s\n"

#: schedutils/taskset.c:99
#, c-format
msgid "pid %d's new affinity mask: %s\n"
msgstr "pid %d 的新亲和力掩码：%s\n"

#: schedutils/taskset.c:100
#, c-format
msgid "pid %d's current affinity mask: %s\n"
msgstr "pid %d 的当前亲和力掩码：%s\n"

#: schedutils/taskset.c:104
msgid "internal error: conversion from cpuset to string failed"
msgstr "内部错误：从 cpuset 转换到字符串失败"

#: schedutils/taskset.c:113
#, c-format
msgid "failed to set pid %d's affinity"
msgstr "设置 pid %d 的亲和力失败"

#: schedutils/taskset.c:114
#, c-format
msgid "failed to get pid %d's affinity"
msgstr "获取 pid %d 的亲和力失败"

#: schedutils/taskset.c:142
msgid "affinity cannot be set due to PF_NO_SETAFFINITY flag set"
msgstr ""

#: schedutils/taskset.c:213 sys-utils/chcpu.c:300 sys-utils/irqtop.c:326
msgid "cannot determine NR_CPUS; aborting"
msgstr "无法确定 NR_CPUS；将中止"

#: schedutils/taskset.c:222 schedutils/taskset.c:235 sys-utils/chcpu.c:307
#: sys-utils/irqtop.c:330
msgid "cpuset_alloc failed"
msgstr "cpuset_alloc 失败"

#: schedutils/taskset.c:242 sys-utils/chcpu.c:234 sys-utils/irqtop.c:333
#, c-format
msgid "failed to parse CPU list: %s"
msgstr "解析 CPU 列表失败：%s"

#: schedutils/taskset.c:245
#, c-format
msgid "failed to parse CPU mask: %s"
msgstr "解析 CPU 掩码失败：%s"

#: schedutils/uclampset.c:56
#, fuzzy, c-format
#| msgid ""
#| " %1$s [options] -p <pid>...\n"
#| " %1$s [options] -P <pgid>...\n"
#| " %1$s [options] -u <uid>...\n"
#| " %1$s [options] <command>\n"
msgid ""
" %1$s [options]\n"
" %1$s [options] --pid <pid> | --system | <command> <arg>...\n"
msgstr ""
" %1$s [选项] -p <pid>...\n"
" %1$s [选项] -P <pgid>...\n"
" %1$s [选项] -u <uid>...\n"
" %1$s [选项] <命令>\n"

#: schedutils/uclampset.c:61
#, fuzzy
#| msgid "Show or change the real-time scheduling attributes of a process.\n"
msgid "Show or change the utilization clamping attributes.\n"
msgstr "显示或更改某个进程的实时调度属性。\n"

#: schedutils/uclampset.c:64
#, fuzzy
#| msgid " -<number>            how many lines to show\n"
msgid " -m <value>           util_min value to set\n"
msgstr " -<数字>              显示行数\n"

#: schedutils/uclampset.c:65
#, fuzzy
#| msgid " -<number>            how many lines to show\n"
msgid " -M <value>           util_max value to set\n"
msgstr " -<数字>              显示行数\n"

#: schedutils/uclampset.c:67
msgid " -p, --pid <pid>      operate on existing given pid\n"
msgstr " -p, --pid <pid>      对指定且存在的 pid 操作\n"

#: schedutils/uclampset.c:68
#, fuzzy
#| msgid " -s, --system-accs        display system accounts\n"
msgid " -s, --system         operate on system\n"
msgstr " -s, --system-accs        显示系统帐户\n"

#: schedutils/uclampset.c:69
msgid " -R, --reset-on-fork  set reset-on-fork flag\n"
msgstr ""

#: schedutils/uclampset.c:75
msgid "Utilization value range is [0:1024]. Use special -1 value to reset to system's default.\n"
msgstr ""

#: schedutils/uclampset.c:92 schedutils/uclampset.c:158
#, fuzzy, c-format
#| msgid "failed to get pid %d's attributes"
msgid "failed to get pid %d's uclamp values"
msgstr "获取 pid %d 的属性失败"

#: schedutils/uclampset.c:99
#, c-format
msgid "%s (%d) util_clamp: min: %d max: %d\n"
msgstr ""

#: schedutils/uclampset.c:129
#, c-format
msgid "System util_clamp: min: %u max: %u\n"
msgstr ""

#: schedutils/uclampset.c:188
#, fuzzy, c-format
#| msgid "failed to set tid %d's policy"
msgid "failed to set tid %d's uclamp values"
msgstr "设置 tid %d 策略失败"

#: schedutils/uclampset.c:193
#, fuzzy, c-format
#| msgid "failed to set pid %d's policy"
msgid "failed to set pid %d's uclamp values"
msgstr "设置 pid %d 的策略失败"

#: schedutils/uclampset.c:207
msgid "util_min must be <= util_max"
msgstr "util_min 必须 <= util_max"

#: schedutils/uclampset.c:218
#, c-format
msgid "%d out of range"
msgstr "%d 超出范围"

#: schedutils/uclampset.c:269
msgid "invalid util_min argument"
msgstr "无效的 util_min 参数"

#: schedutils/uclampset.c:274
msgid "invalid util_max argument"
msgstr "无效的 util_max 参数"

#: schedutils/uclampset.c:296
msgid "missing -p option"
msgstr "缺少 -p 参数"

#: schedutils/uclampset.c:314
msgid "no cmd to execute"
msgstr "无可执行的指令"

#: sys-utils/blkdiscard.c:76
#, c-format
msgid "%s: Zero-filled %<PRIu64> bytes from the offset %<PRIu64>\n"
msgstr "%s: 用零填充的 %<PRIu64> 个字节，始于偏移量 %<PRIu64>\n"

#: sys-utils/blkdiscard.c:81
#, c-format
msgid "%s: Discarded %<PRIu64> bytes from the offset %<PRIu64>\n"
msgstr "%1$s：已忽略从偏移 %3$<PRIu64> 位置开始的 %2$<PRIu64> 个字节\n"

#: sys-utils/blkdiscard.c:95
msgid "Discard the content of sectors on a device.\n"
msgstr "丢弃一个设备上的扇区内容。\n"

#: sys-utils/blkdiscard.c:98
msgid " -f, --force         disable all checking\n"
msgstr " -f, --force         禁用所有检查\n"

#: sys-utils/blkdiscard.c:99
msgid " -l, --length <num>  length of bytes to discard from the offset\n"
msgstr " -l, --length <数值> 从起始处起要丢弃的长度(字节数)\n"

#: sys-utils/blkdiscard.c:100
msgid " -o, --offset <num>  offset in bytes to discard from\n"
msgstr " -o, --offset <数值> 要丢弃的起始位置(字节)\n"

#: sys-utils/blkdiscard.c:101
msgid " -p, --step <num>    size of the discard iterations within the offset\n"
msgstr " -p, --step <数值>   在偏移范围内丢弃迭代的尺寸\n"

#: sys-utils/blkdiscard.c:102
#, fuzzy
#| msgid " -q, --quiet         suppress output messages"
msgid " -q, --quiet         suppress warning messages\n"
msgstr " -q, --quiet         禁止输出信息"

#: sys-utils/blkdiscard.c:103
msgid " -s, --secure        perform secure discard\n"
msgstr " -s, --secure        执行安全丢弃\n"

#: sys-utils/blkdiscard.c:104
msgid " -v, --verbose       print aligned length and offset\n"
msgstr " -v, --verbose       打印对齐的长度和偏移\n"

#: sys-utils/blkdiscard.c:105
msgid " -z, --zeroout       zero-fill rather than discard\n"
msgstr " -z, --zeroout       用 零填充而非丢弃\n"

#: sys-utils/blkdiscard.c:162 sys-utils/blkzone.c:378
#, c-format
msgid "%s: %s ioctl failed"
msgstr "%s：%s ioctl 失败"

#: sys-utils/blkdiscard.c:208 sys-utils/fstrim.c:546 sys-utils/losetup.c:710
#: text-utils/hexdump.c:131
msgid "failed to parse offset"
msgstr "解析偏移失败"

#: sys-utils/blkdiscard.c:212
msgid "failed to parse step"
msgstr "解析步长失败"

#: sys-utils/blkdiscard.c:242 sys-utils/blkpr.c:307 sys-utils/blkzone.c:499
#: sys-utils/fallocate.c:382 sys-utils/fsfreeze.c:110 sys-utils/fstrim.c:577
#: sys-utils/umount.c:619 term-utils/script.c:908
msgid "unexpected number of arguments"
msgstr "参数数量异常"

#: sys-utils/blkdiscard.c:256
#, c-format
msgid "%s: BLKGETSIZE64 ioctl failed"
msgstr "%s：BLKGETSIZE64 ioctl 失败"

#: sys-utils/blkdiscard.c:258 sys-utils/blkzone.c:155
#, c-format
msgid "%s: BLKSSZGET ioctl failed"
msgstr "%s：BLKSSZGET ioctl 失败"

#: sys-utils/blkdiscard.c:262
#, c-format
msgid "%s: offset %<PRIu64> is not aligned to sector size %i"
msgstr "%s: 偏移量 %<PRIu64> 未与扇区大小 %i 对齐"

#: sys-utils/blkdiscard.c:267 sys-utils/blkzone.c:356
#, c-format
msgid "%s: offset is greater than device size"
msgstr "%s：偏移量超过设备大小"

#: sys-utils/blkdiscard.c:276
#, c-format
msgid "%s: length %<PRIu64> is not aligned to sector size %i"
msgstr "%s: 长度 %<PRIu64> 未与扇区大小 %i 对齐"

#: sys-utils/blkdiscard.c:281
msgid "Operation forced, data will be lost!"
msgstr "强制进行操作，数据将丢失！"

#: sys-utils/blkdiscard.c:292
msgid "This is destructive operation, data will be lost! Use the -f option to override."
msgstr "这是一个破坏性的操作，数据将会丢失！使用 -f 选项以强制进行。"

#: sys-utils/blkdiscard.c:299
#, fuzzy
#| msgid "failed to allocate device"
msgid "failed to probe the device"
msgstr "分配设备失败"

#: sys-utils/blkpr.c:195 sys-utils/blkpr.c:280
#, fuzzy
#| msgid "%c: unknown command"
msgid "unknown command"
msgstr "%c：未知命令"

#: sys-utils/blkpr.c:200
#, fuzzy
#| msgid "ioctl failed"
msgid "pr ioctl failed"
msgstr "ioctl 失败"

#: sys-utils/blkpr.c:202
#, c-format
msgid "error code 0x%x, for more detailed information see specification of device model."
msgstr ""

#: sys-utils/blkpr.c:216
#, fuzzy
#| msgid "Discard the content of sectors on a device.\n"
msgid "Persistent reservations on a device.\n"
msgstr "丢弃一个设备上的扇区内容。\n"

#: sys-utils/blkpr.c:219
#, fuzzy
#| msgid " -c, --command <command>       run command rather than interactive shell\n"
msgid " -c, --command <cmd>      command of persistent reservations\n"
msgstr " -c, --command <命令>          运行指定命令而非启动交互式 shell\n"

#: sys-utils/blkpr.c:220
#, fuzzy
#| msgid " -u, --user <user>               username\n"
msgid " -k, --key <num>          key to operate\n"
msgstr " -u, --user <用户>               用户名\n"

#: sys-utils/blkpr.c:221
#, fuzzy
#| msgid " -p, --task <pid>       print process namespaces\n"
msgid " -K, --oldkey <num>       old key to operate\n"
msgstr " -p, --task <pid>       打印进程名字空间\n"

#: sys-utils/blkpr.c:222
#, fuzzy
#| msgid " -i, --iflag [-]<iflag>  set input mode flag\n"
msgid " -f, --flag <flag>        command flag\n"
msgstr " -i, --iflag [-]<iflag>  设置输入模式标志\n"

#: sys-utils/blkpr.c:223
#, fuzzy
#| msgid " -t, --type <type>    specify the partition type\n"
msgid " -t, --type <type>        command type\n"
msgstr " -t, --type <类型>    指定分区类型\n"

#: sys-utils/blkpr.c:230
msgid " <cmd> is an command, available command:\n"
msgstr ""

#: sys-utils/blkpr.c:233
msgid " <flag> is a command flag, available flags:\n"
msgstr ""

#: sys-utils/blkpr.c:236
msgid " <type> is a command type, available types:\n"
msgstr ""

#: sys-utils/blkpr.c:271
#, fuzzy
#| msgid "failed to parse end"
msgid "failed to parse key"
msgstr "解析 终点 失败"

#: sys-utils/blkpr.c:275
#, fuzzy
#| msgid "failed to parse id"
msgid "failed to parse old key"
msgstr "解析 id 失败"

#: sys-utils/blkpr.c:285
#, fuzzy
#| msgid "unknown user %s"
msgid "unknown type"
msgstr "未知用户 %s"

#: sys-utils/blkpr.c:290
#, fuzzy
#| msgid "unknown flag: %s"
msgid "unknown flag"
msgstr "未知标志：%s"

#: sys-utils/blkzone.c:93
#, fuzzy
#| msgid "List information about block devices.\n"
msgid "Report zone information about the given device"
msgstr "列出块设备的信息。\n"

#: sys-utils/blkzone.c:97
#, fuzzy
#| msgid "List information about block devices.\n"
msgid "Report sum of zone capacities for the given device"
msgstr "列出块设备的信息。\n"

#: sys-utils/blkzone.c:103
msgid "Reset a range of zones."
msgstr ""

#: sys-utils/blkzone.c:109
msgid "Open a range of zones."
msgstr ""

#: sys-utils/blkzone.c:115
msgid "Close a range of zones."
msgstr ""

#: sys-utils/blkzone.c:121
msgid "Set a range of zones to Full."
msgstr ""

#: sys-utils/blkzone.c:152
#, fuzzy, c-format
#| msgid "%s: set direct io failed"
msgid "%s: blkdev_get_sectors ioctl failed"
msgstr "%s︰ 设置直接 io 失败"

#: sys-utils/blkzone.c:242
#, fuzzy, c-format
#| msgid "%s: offset is greater than device size"
msgid "%s: offset is greater than or equal to device size"
msgstr "%s：偏移量超过设备大小"

#: sys-utils/blkzone.c:246 sys-utils/blkzone.c:346
#, fuzzy, c-format
#| msgid "%s: unable to write zone map"
msgid "%s: unable to determine zone size"
msgstr "%s：无法写 zone map"

#: sys-utils/blkzone.c:264
#, fuzzy, c-format
#| msgid "%s: BLKGETSIZE64 ioctl failed"
msgid "%s: BLKREPORTZONE ioctl failed"
msgstr "%s：BLKGETSIZE64 ioctl 失败"

#: sys-utils/blkzone.c:267
#, c-format
msgid "Found %d zones from 0x%<PRIx64>\n"
msgstr ""

#: sys-utils/blkzone.c:302
#, c-format
msgid "  start: 0x%09<PRIx64>, len 0x%06<PRIx64>, cap 0x%06<PRIx64>, wptr 0x%06<PRIx64> reset:%u non-seq:%u, zcond:%2u(%s) [type: %u(%s)]\n"
msgstr ""

#: sys-utils/blkzone.c:310
#, c-format
msgid "  start: 0x%09<PRIx64>, len 0x%06<PRIx64>, wptr 0x%06<PRIx64> reset:%u non-seq:%u, zcond:%2u(%s) [type: %u(%s)]\n"
msgstr ""

#: sys-utils/blkzone.c:326
#, c-format
msgid "0x%09<PRIx64>\n"
msgstr ""

#: sys-utils/blkzone.c:351
#, fuzzy, c-format
#| msgid "%s: offset %<PRIu64> is not aligned to sector size %i"
msgid "%s: offset %<PRIu64> is not aligned to zone size %lu"
msgstr "%s: 偏移量 %<PRIu64> 未与扇区大小 %i 对齐"

#: sys-utils/blkzone.c:370
#, fuzzy, c-format
#| msgid "%s: offset %<PRIu64> is not aligned to sector size %i"
msgid "%s: number of sectors %<PRIu64> is not aligned to zone size %lu"
msgstr "%s: 偏移量 %<PRIu64> 未与扇区大小 %i 对齐"

#: sys-utils/blkzone.c:381
#, fuzzy, c-format
#| msgid "Partition table length changed from %<PRIu32> to %<PRIu64>."
msgid "%s: successful %s of zones in range from %<PRIu64>, to %<PRIu64>"
msgstr "分区表长度已从 %<PRIu32> 改为 %<PRIu64>。"

#: sys-utils/blkzone.c:396
#, c-format
msgid " %s <command> [options] <device>\n"
msgstr " %s <命令> [选项] <设备>\n"

#: sys-utils/blkzone.c:399
msgid "Run zone command on the given block device.\n"
msgstr ""

#: sys-utils/blkzone.c:406
#, fuzzy
#| msgid " -o, --offset <num>   offset for range operations, in bytes\n"
msgid " -o, --offset <sector>  start sector of zone to act (in 512-byte sectors)\n"
msgstr " -o, --offset <数字>  范围操作的偏移量(字节数)\n"

#: sys-utils/blkzone.c:407
msgid " -l, --length <sectors> maximum sectors to act (in 512-byte sectors)\n"
msgstr ""

#: sys-utils/blkzone.c:408
#, fuzzy
#| msgid " -t, --streams <number>    number of compression streams\n"
msgid " -c, --count <number>   maximum number of zones\n"
msgstr " -t, --streams <数字>      压缩流数量\n"

#: sys-utils/blkzone.c:409
#, fuzzy
#| msgid " -f, --force            force hardlinking across filesystems"
msgid " -f, --force            enforce on block devices used by the system\n"
msgstr " -f, --force            强制跨文件系统进行硬链接"

#: sys-utils/blkzone.c:410
msgid " -v, --verbose          display more details\n"
msgstr " -v, --verbose          显示更多细节\n"

#: sys-utils/blkzone.c:415
#, fuzzy
#| msgid "sector count: %d, sector size: %d\n"
msgid "<sector> and <sectors>"
msgstr "扇区计数：%d，扇区大小：%d\n"

#: sys-utils/blkzone.c:453
#, fuzzy, c-format
#| msgid "%s is not a valid block device"
msgid "%s is not valid command name"
msgstr "%s 不是一个有效的块设备"

#: sys-utils/blkzone.c:465
#, fuzzy
#| msgid "failed to parse number of lines"
msgid "failed to parse number of zones"
msgstr "解析行数失败"

#: sys-utils/blkzone.c:469
#, fuzzy
#| msgid "failed to parse number of lines"
msgid "failed to parse number of sectors"
msgstr "解析行数失败"

#: sys-utils/blkzone.c:473
#, fuzzy
#| msgid "failed to parse offset"
msgid "failed to parse zone offset"
msgstr "解析偏移失败"

#: sys-utils/blkzone.c:492 sys-utils/setsid.c:92
msgid "no command specified"
msgstr "没有指定命令"

#: sys-utils/chcpu.c:84 sys-utils/chcpu.c:181
#, c-format
msgid "CPU %u does not exist"
msgstr "CPU %u 不存在"

#: sys-utils/chcpu.c:89
#, c-format
msgid "CPU %u is not hot pluggable"
msgstr "CPU %u 不能进行热插拔"

#: sys-utils/chcpu.c:96
#, c-format
msgid "CPU %u is already enabled\n"
msgstr "CPU %u 已经启用\n"

#: sys-utils/chcpu.c:100
#, c-format
msgid "CPU %u is already disabled\n"
msgstr "CPU %u 已经禁用\n"

#: sys-utils/chcpu.c:108
#, c-format
msgid "CPU %u enable failed (CPU is deconfigured)"
msgstr "CPU %u 启用失败(CPU 已取消配置)"

#: sys-utils/chcpu.c:111
#, c-format
msgid "CPU %u enable failed"
msgstr "CPU %u 启用失败"

#: sys-utils/chcpu.c:114
#, c-format
msgid "CPU %u enabled\n"
msgstr "CPU %u 已启用\n"

#: sys-utils/chcpu.c:117
#, c-format
msgid "CPU %u disable failed (last enabled CPU)"
msgstr "CPU %u 禁用失败 (最后启用的 CPU)"

#: sys-utils/chcpu.c:123
#, c-format
msgid "CPU %u disable failed"
msgstr "CPU %u 禁用失败"

#: sys-utils/chcpu.c:126
#, c-format
msgid "CPU %u disabled\n"
msgstr "CPU %u 已禁用\n"

#: sys-utils/chcpu.c:139
msgid "This system does not support rescanning of CPUs"
msgstr "该系统不支持重新扫描 CPU"

#: sys-utils/chcpu.c:142
msgid "Failed to trigger rescan of CPUs"
msgstr "触发 CPU 重新扫描失败"

#: sys-utils/chcpu.c:144
#, c-format
msgid "Triggered rescan of CPUs\n"
msgstr "已触发 CPU 重新扫描\n"

#: sys-utils/chcpu.c:151
msgid "This system does not support setting the dispatching mode of CPUs"
msgstr "此系统不支持设置 CPU 分派模式(dispatching mode)"

#: sys-utils/chcpu.c:155
msgid "Failed to set horizontal dispatch mode"
msgstr "设置水平分派模式失败"

#: sys-utils/chcpu.c:157
#, c-format
msgid "Successfully set horizontal dispatching mode\n"
msgstr "成功设置了水平分派模式\n"

#: sys-utils/chcpu.c:160
msgid "Failed to set vertical dispatch mode"
msgstr "设置竖直分派模式失败"

#: sys-utils/chcpu.c:162
#, c-format
msgid "Successfully set vertical dispatching mode\n"
msgstr "成功设置了竖直分派模式\n"

#: sys-utils/chcpu.c:186
#, c-format
msgid "CPU %u is not configurable"
msgstr "CPU %u 是不可配置的"

#: sys-utils/chcpu.c:192
#, c-format
msgid "CPU %u is already configured\n"
msgstr "CPU %u 是已经配置过的\n"

#: sys-utils/chcpu.c:196
#, c-format
msgid "CPU %u is already deconfigured\n"
msgstr "CPU %u 是已经取消配置的\n"

#: sys-utils/chcpu.c:201
#, c-format
msgid "CPU %u deconfigure failed (CPU is enabled)"
msgstr "CPU %u 取消配置失败(CPU 已启用)"

#: sys-utils/chcpu.c:208
#, c-format
msgid "CPU %u configure failed"
msgstr "CPU %u 配置失败"

#: sys-utils/chcpu.c:211
#, c-format
msgid "CPU %u configured\n"
msgstr "CPU %u 已配置\n"

#: sys-utils/chcpu.c:215
#, c-format
msgid "CPU %u deconfigure failed"
msgstr "CPU %u 取消配置失败"

#: sys-utils/chcpu.c:218
#, c-format
msgid "CPU %u deconfigured\n"
msgstr "CPU %u 已取消配置\n"

#: sys-utils/chcpu.c:233
#, c-format
msgid "invalid CPU number in CPU list: %s"
msgstr "CPU 列表中的 CPU 数量无效：%s"

#: sys-utils/chcpu.c:241 text-utils/col.c:170
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr ""
"\n"
"用法：\n"
" %s [选项]\n"

#: sys-utils/chcpu.c:245
msgid "Configure CPUs in a multi-processor system.\n"
msgstr "配置多处理器系统中的 CPU。\n"

#: sys-utils/chcpu.c:249
#, fuzzy
#| msgid ""
#| "\n"
#| "Options:\n"
#| "  -h, --help                    print this help\n"
#| "  -e, --enable <cpu-list>       enable cpus\n"
#| "  -d, --disable <cpu-list>      disable cpus\n"
#| "  -c, --configure <cpu-list>    configure cpus\n"
#| "  -g, --deconfigure <cpu-list>  deconfigure cpus\n"
#| "  -p, --dispatch <mode>         set dispatching mode\n"
#| "  -r, --rescan                  trigger rescan of cpus\n"
#| "  -V, --version                 output version information and exit\n"
msgid ""
" -e, --enable <cpu-list>       enable cpus\n"
" -d, --disable <cpu-list>      disable cpus\n"
" -c, --configure <cpu-list>    configure cpus\n"
" -g, --deconfigure <cpu-list>  deconfigure cpus\n"
" -p, --dispatch <mode>         set dispatching mode\n"
" -r, --rescan                  trigger rescan of cpus\n"
msgstr ""
"\n"
"选项：\n"
"  -h, --help                    打印此帮助\n"
"  -e, --enable <cpu列表>        启用 cpu\n"
"  -d, --disable <cpu列表>       禁用 cpu\n"
"  -c, --configure <cpu列表>     配置 cpu\n"
"  -g, --deconfigure <cpu列表>   取消配置 cpu\n"
"  -p, --dispatch <模式>         设置分派模式\n"
"  -r, --rescan                  触发重新扫描 cpu\n"
"  -V, --version                 输出版本信息并退出\n"

#: sys-utils/chcpu.c:296
#, fuzzy
#| msgid "%s: failed to initialize sysfs handler"
msgid "failed to initialize sysfs handler"
msgstr "%s：初始化 sysfs 处理函数失败"

#: sys-utils/chcpu.c:338
#, c-format
msgid "unsupported argument: %s"
msgstr "不支持的参数：%s"

#: sys-utils/chmem.c:100
#, c-format
msgid "Memory Block %<PRIu64> (0x%016<PRIx64>-0x%016<PRIx64>)"
msgstr ""

#: sys-utils/chmem.c:124 sys-utils/chmem.c:197
#, fuzzy
#| msgid "failed to parse id"
msgid "Failed to parse index"
msgstr "解析 id 失败"

#: sys-utils/chmem.c:151
#, c-format
msgid "%s enable failed\n"
msgstr "%s 启用失败\n"

#: sys-utils/chmem.c:153
#, c-format
msgid "%s disable failed\n"
msgstr "%s 禁用失败\n"

#: sys-utils/chmem.c:156 sys-utils/chmem.c:242
#, c-format
msgid "%s enabled\n"
msgstr "%s 已启用\n"

#: sys-utils/chmem.c:158 sys-utils/chmem.c:244
#, c-format
msgid "%s disabled\n"
msgstr "%s 已禁用\n"

#: sys-utils/chmem.c:170
#, c-format
msgid "Could only enable %s of memory"
msgstr ""

#: sys-utils/chmem.c:172
#, c-format
msgid "Could only disable %s of memory"
msgstr ""

#: sys-utils/chmem.c:206
#, c-format
msgid "%s already enabled\n"
msgstr ""
"%s 已启用\n"
"\n"

#: sys-utils/chmem.c:208
#, c-format
msgid "%s already disabled\n"
msgstr "%s 已禁用\n"

#: sys-utils/chmem.c:218
#, fuzzy, c-format
#| msgid "%s: failed to disarm watchdog"
msgid "%s enable failed: Zone mismatch"
msgstr "%s：喂看门狗失败"

#: sys-utils/chmem.c:222
#, fuzzy, c-format
#| msgid "%s: failed to disarm watchdog"
msgid "%s disable failed: Zone mismatch"
msgstr "%s：喂看门狗失败"

#: sys-utils/chmem.c:237
#, c-format
msgid "%s enable failed"
msgstr "%s 启用失败"

#: sys-utils/chmem.c:239
#, c-format
msgid "%s disable failed"
msgstr "%s 禁用失败"

#: sys-utils/chmem.c:274 sys-utils/lsmem.c:503
#, c-format
msgid "Failed to read %s"
msgstr "无法读取 %s"

#: sys-utils/chmem.c:280
#, fuzzy
#| msgid "failed to parse number"
msgid "Failed to parse block number"
msgstr "解析数字失败"

#: sys-utils/chmem.c:285
msgid "Failed to parse size"
msgstr "解析大小失败"

#: sys-utils/chmem.c:289
#, c-format
msgid "Size must be aligned to memory block size (%s)"
msgstr ""

#: sys-utils/chmem.c:298
#, fuzzy
#| msgid "failed to parse start"
msgid "Failed to parse start"
msgstr "解析 起点 失败"

#: sys-utils/chmem.c:299
#, fuzzy
#| msgid "failed to parse end"
msgid "Failed to parse end"
msgstr "解析 终点 失败"

#: sys-utils/chmem.c:303
#, fuzzy, c-format
#| msgid "invalid start argument"
msgid "Invalid start address format: %s"
msgstr "无效的 起点 参数"

#: sys-utils/chmem.c:305
#, fuzzy, c-format
#| msgid "invalid signal name or number: %s"
msgid "Invalid end address format: %s"
msgstr "无效的信号名或数字：%s"

#: sys-utils/chmem.c:306
#, fuzzy
#| msgid "failed to parse start"
msgid "Failed to parse start address"
msgstr "解析 起点 失败"

#: sys-utils/chmem.c:307
#, fuzzy
#| msgid "failed to parse end"
msgid "Failed to parse end address"
msgstr "解析 终点 失败"

#: sys-utils/chmem.c:310
#, c-format
msgid "Start address and (end address + 1) must be aligned to memory block size (%s)"
msgstr ""

#: sys-utils/chmem.c:324
#, c-format
msgid "Invalid parameter: %s"
msgstr "无效参数：%s"

#: sys-utils/chmem.c:331
#, c-format
msgid "Invalid range: %s"
msgstr "无效范围：%s"

#: sys-utils/chmem.c:340
#, fuzzy, c-format
#| msgid " %s [options] [y | n]\n"
msgid " %s [options] [SIZE|RANGE|BLOCKRANGE]\n"
msgstr " %s [选项] [y | n]\n"

#: sys-utils/chmem.c:343
msgid "Set a particular size or range of memory online or offline.\n"
msgstr ""

#: sys-utils/chmem.c:346
msgid " -e, --enable       enable memory\n"
msgstr " -e, --enable       启用内存\n"

#: sys-utils/chmem.c:347
msgid " -d, --disable      disable memory\n"
msgstr " -d, --disable      禁用内存\n"

#: sys-utils/chmem.c:348
msgid " -b, --blocks       use memory blocks\n"
msgstr " -b, --blocks       使用内存块\n"

#: sys-utils/chmem.c:349
msgid " -z, --zone <name>  select memory zone (see below)\n"
msgstr ""

#: sys-utils/chmem.c:350
msgid " -v, --verbose      verbose output\n"
msgstr " -v, --verbose      详尽输出\n"

#: sys-utils/chmem.c:353
#, fuzzy
#| msgid ""
#| "\n"
#| "Supported log facilities:\n"
msgid ""
"\n"
"Supported zones:\n"
msgstr ""
"\n"
"支持的日志设施：\n"

#: sys-utils/chmem.c:394 sys-utils/lscpu-cputype.c:889 sys-utils/lsmem.c:667
#, fuzzy, c-format
#| msgid "%s: failed to initialize sysfs handler"
msgid "failed to initialize %s handler"
msgstr "%s：初始化 sysfs 处理函数失败"

#: sys-utils/chmem.c:440
msgid "zone ignored, no valid_zones sysfs attribute present"
msgstr ""

#: sys-utils/chmem.c:445
#, fuzzy, c-format
#| msgid "unknown month name: %s"
msgid "unknown memory zone: %s"
msgstr "月份名未知：%s"

#: sys-utils/choom.c:38
#, fuzzy, c-format
#| msgid ""
#| " %1$s [options] -p <pid>...\n"
#| " %1$s [options] -P <pgid>...\n"
#| " %1$s [options] -u <uid>...\n"
#| " %1$s [options] <command>\n"
msgid ""
" %1$s [options] -p pid\n"
" %1$s [options] -n number -p pid\n"
" %1$s [options] -n number [--] command [args...]]\n"
msgstr ""
" %1$s [选项] -p <pid>...\n"
" %1$s [选项] -P <pgid>...\n"
" %1$s [选项] -u <uid>...\n"
" %1$s [选项] <命令>\n"

#: sys-utils/choom.c:44
msgid "Display and adjust OOM-killer score.\n"
msgstr ""

#: sys-utils/choom.c:47
#, fuzzy
#| msgid " -n, --priority <num>   specify the nice increment value\n"
msgid " -n, --adjust <num>     specify the adjust score value\n"
msgstr " -n, --priority <数字>  指定 nice 增量\n"

#: sys-utils/choom.c:48
#, fuzzy
#| msgid " -p, --task <pid>       print process namespaces\n"
msgid " -p, --pid <num>        process ID\n"
msgstr " -p, --task <pid>       打印进程名字空间\n"

#: sys-utils/choom.c:60
msgid "failed to read OOM score value"
msgstr ""

#: sys-utils/choom.c:70
#, fuzzy
#| msgid "failed to read speed"
msgid "failed to read OOM score adjust value"
msgstr "读 速度 失败"

#: sys-utils/choom.c:105
#, fuzzy
#| msgid "invalid heads argument"
msgid "invalid adjust argument"
msgstr "无效的 磁头数 参数"

#: sys-utils/choom.c:119 term-utils/mesg.c:178
#, c-format
msgid "invalid argument: %s"
msgstr "无效参数：%s"

#: sys-utils/choom.c:123
#, fuzzy
#| msgid "COMMAND not specified."
msgid "no PID or COMMAND specified"
msgstr "没有指定命令"

#: sys-utils/choom.c:127
#, fuzzy
#| msgid "invalid offset value specified"
msgid "no OOM score adjust value specified"
msgstr "指定的偏移值无效"

#: sys-utils/choom.c:135
#, fuzzy, c-format
#| msgid "pid %d's current scheduling priority: %d\n"
msgid "pid %d's current OOM score: %d\n"
msgstr "pid %d 的当前调度优先级：%d\n"

#: sys-utils/choom.c:136
#, fuzzy, c-format
#| msgid "pid %d's current scheduling priority: %d\n"
msgid "pid %d's current OOM score adjust value: %d\n"
msgstr "pid %d 的当前调度优先级：%d\n"

#: sys-utils/choom.c:143 sys-utils/choom.c:150
#, fuzzy
#| msgid "failed to set data"
msgid "failed to set score adjust value"
msgstr "设置数据失败"

#: sys-utils/choom.c:145
#, c-format
msgid "pid %d's OOM score adjust value changed from %d to %d\n"
msgstr ""

#: sys-utils/ctrlaltdel.c:28
#, c-format
msgid " %s hard|soft\n"
msgstr " %s hard|soft\n"

#: sys-utils/ctrlaltdel.c:31
#, c-format
msgid "Set the function of the Ctrl-Alt-Del combination.\n"
msgstr "设置 Ctrl-Alt-Del 组合键的功能。\n"

#: sys-utils/ctrlaltdel.c:54
msgid "implicit"
msgstr "隐含"

#: sys-utils/ctrlaltdel.c:55
#, c-format
msgid "unexpected value in %s: %ju"
msgstr "%s 有异常值：%ju"

#: sys-utils/ctrlaltdel.c:66
msgid "You must be root to set the Ctrl-Alt-Del behavior"
msgstr "只有 root 用户才能设置 Ctrl-Alt-Del 行为"

#: sys-utils/ctrlaltdel.c:74 sys-utils/ipcrm.c:396 sys-utils/ipcrm.c:419
#, c-format
msgid "unknown argument: %s"
msgstr "未知参数：%s"

#: sys-utils/dmesg.c:110
msgid "system is unusable"
msgstr "系统无法使用"

#: sys-utils/dmesg.c:111
msgid "action must be taken immediately"
msgstr "操作必须立即执行"

#: sys-utils/dmesg.c:112
msgid "critical conditions"
msgstr "紧急条件"

#: sys-utils/dmesg.c:113
msgid "error conditions"
msgstr "错误条件"

#: sys-utils/dmesg.c:114
msgid "warning conditions"
msgstr "警告条件"

#: sys-utils/dmesg.c:115
msgid "normal but significant condition"
msgstr "正常但重要的条件"

#: sys-utils/dmesg.c:116
msgid "informational"
msgstr "信息"

#: sys-utils/dmesg.c:117
msgid "debug-level messages"
msgstr "调试级别的消息"

#: sys-utils/dmesg.c:131
msgid "kernel messages"
msgstr "内核消息"

#: sys-utils/dmesg.c:132
msgid "random user-level messages"
msgstr "随机的用户级消息"

#: sys-utils/dmesg.c:133
msgid "mail system"
msgstr "邮件系统"

#: sys-utils/dmesg.c:134
msgid "system daemons"
msgstr "系统守护进程"

#: sys-utils/dmesg.c:135
msgid "security/authorization messages"
msgstr "安全/认证消息"

#: sys-utils/dmesg.c:136
msgid "messages generated internally by syslogd"
msgstr "syslogd 内部生成的消息"

#: sys-utils/dmesg.c:137
msgid "line printer subsystem"
msgstr "行打印机子系统"

#: sys-utils/dmesg.c:138
msgid "network news subsystem"
msgstr "网络新闻子系统"

#: sys-utils/dmesg.c:139
msgid "UUCP subsystem"
msgstr "UUCP 子系统"

#: sys-utils/dmesg.c:140
msgid "clock daemon"
msgstr "时钟守护进程"

#: sys-utils/dmesg.c:141
msgid "security/authorization messages (private)"
msgstr "安全/认证消息(私有)"

#: sys-utils/dmesg.c:142
msgid "FTP daemon"
msgstr "FTP 守护进程"

#: sys-utils/dmesg.c:279
msgid "Display or control the kernel ring buffer.\n"
msgstr "显示或控制内核环形缓冲区。\n"

#: sys-utils/dmesg.c:282
msgid " -C, --clear                 clear the kernel ring buffer\n"
msgstr " -C, --clear                 清除内核环形缓冲区(ring butter)\n"

#: sys-utils/dmesg.c:283
msgid " -c, --read-clear            read and clear all messages\n"
msgstr " -c, --read-clear            读取并清除所有消息\n"

#: sys-utils/dmesg.c:284
msgid " -D, --console-off           disable printing messages to console\n"
msgstr " -D, --console-off           禁止向终端打印消息\n"

#: sys-utils/dmesg.c:285
msgid " -E, --console-on            enable printing messages to console\n"
msgstr " -E, --console-on            启用向终端打印消息\n"

#: sys-utils/dmesg.c:286
msgid " -F, --file <file>           use the file instead of the kernel log buffer\n"
msgstr " -F, --file <文件>           用 文件 代替内核日志缓冲区\n"

#: sys-utils/dmesg.c:287
msgid " -f, --facility <list>       restrict output to defined facilities\n"
msgstr " -f, --facility <列表>       将输出限制为定义的设施\n"

#: sys-utils/dmesg.c:288
msgid " -H, --human                 human readable output\n"
msgstr " -H, --human                 易读格式输出\n"

#: sys-utils/dmesg.c:289
#, fuzzy
#| msgid " -J, --json             use JSON output format\n"
msgid " -J, --json                  use JSON output format\n"
msgstr " -J, --json              使用 JSON 输出格式\n"

#: sys-utils/dmesg.c:290
msgid " -k, --kernel                display kernel messages\n"
msgstr " -k, --kernel                显示内核消息\n"

#: sys-utils/dmesg.c:292
#, fuzzy, c-format
#| msgid " -L, --color[=<when>]        colorize messages (auto, always or never)\n"
msgid " -L, --color[=<when>]        colorize messages (%s, %s or %s)\n"
msgstr " -L, --color[=<时机>]        彩色显示消息(auto, always 或 never)\n"

#: sys-utils/dmesg.c:295
msgid " -l, --level <list>          restrict output to defined levels\n"
msgstr " -l, --level <列表>          限制输出级别\n"

#: sys-utils/dmesg.c:296
msgid " -n, --console-level <level> set level of messages printed to console\n"
msgstr " -n, --console-level <级别>  设置打印到终端的消息级别\n"

#: sys-utils/dmesg.c:297
msgid " -P, --nopager               do not pipe output into a pager\n"
msgstr " -P, --nopager               不将输出通过管道传递给分页程序\n"

#: sys-utils/dmesg.c:298
msgid " -p, --force-prefix          force timestamp output on each line of multi-line messages\n"
msgstr ""

#: sys-utils/dmesg.c:299
msgid " -r, --raw                   print the raw message buffer\n"
msgstr " -r, --raw                   打印原生消息缓冲区\n"

#: sys-utils/dmesg.c:300
#, fuzzy
#| msgid " -n, --noheadings          don't print headings\n"
msgid "     --noescape              don't escape unprintable character\n"
msgstr " -n, --noheadings          不打印标题\n"

#: sys-utils/dmesg.c:301
msgid " -S, --syslog                force to use syslog(2) rather than /dev/kmsg\n"
msgstr " -S, --syslog                强制使用 syslog(2) 而非 /dev/kmsg\n"

#: sys-utils/dmesg.c:302
msgid " -s, --buffer-size <size>    buffer size to query the kernel ring buffer\n"
msgstr " -s, --buffer-size <大小>    查询内核环形缓冲区所用的缓冲区大小\n"

#: sys-utils/dmesg.c:303
msgid " -u, --userspace             display userspace messages\n"
msgstr " -u, --userspace             显示用户空间消息\n"

#: sys-utils/dmesg.c:304
msgid " -w, --follow                wait for new messages\n"
msgstr " -w, --follow                等待新消息\n"

#: sys-utils/dmesg.c:305
#, fuzzy
#| msgid " -w, --follow                wait for new messages\n"
msgid " -W, --follow-new            wait and print only new messages\n"
msgstr " -w, --follow                等待新消息\n"

#: sys-utils/dmesg.c:306
msgid " -x, --decode                decode facility and level to readable string\n"
msgstr " -x, --decode                将设施和级别解码为可读的字符串\n"

#: sys-utils/dmesg.c:307
msgid " -d, --show-delta            show time delta between printed messages\n"
msgstr " -d, --show-delta            显示打印消息之间的时间差\n"

#: sys-utils/dmesg.c:308
msgid " -e, --reltime               show local time and time delta in readable format\n"
msgstr " -e, --reltime               以易读格式显示本地时间和时间差\n"

#: sys-utils/dmesg.c:309
msgid " -T, --ctime                 show human-readable timestamp (may be inaccurate!)\n"
msgstr " -T, --ctime                 显示易读的时间戳(可能不准确！)\n"

#: sys-utils/dmesg.c:310
msgid " -t, --notime                don't show any timestamp with messages\n"
msgstr " -t, --notime                不显示任何消息的时间戳\n"

#: sys-utils/dmesg.c:311
msgid ""
"     --time-format <format>  show timestamp using the given format:\n"
"                               [delta|reltime|ctime|notime|iso]\n"
"Suspending/resume will make ctime and iso timestamps inaccurate.\n"
msgstr ""
"     --time-format <格式>    以指定格式显示时间戳：\n"
"                               [delta|reltime|ctime|notime|iso]\n"
"挂起/恢复会使 ctime 和 iso 时间戳不精确。\n"

#: sys-utils/dmesg.c:314
#, fuzzy
#| msgid " -s, --since <time>   display the lines since the specified time\n"
msgid "     --since <time>          display the lines since the specified time\n"
msgstr " -s, --since <时间>   显示从指定时间起的行\n"

#: sys-utils/dmesg.c:315
#, fuzzy
#| msgid " -t, --until <time>   display the lines until the specified time\n"
msgid "     --until <time>          display the lines until the specified time\n"
msgstr " -t, --until <时间>   显示到指定时间为止的行\n"

#: sys-utils/dmesg.c:319
msgid ""
"\n"
"Supported log facilities:\n"
msgstr ""
"\n"
"支持的日志设施：\n"

#: sys-utils/dmesg.c:325
msgid ""
"\n"
"Supported log levels (priorities):\n"
msgstr ""
"\n"
"支持的日志级别(优先级)：\n"

#: sys-utils/dmesg.c:379
#, c-format
msgid "failed to parse level '%s'"
msgstr "解析级别“%s”失败"

#: sys-utils/dmesg.c:381
#, c-format
msgid "unknown level '%s'"
msgstr "未知级别“%s”"

#: sys-utils/dmesg.c:417
#, c-format
msgid "failed to parse facility '%s'"
msgstr "解析设施“%s”失败"

#: sys-utils/dmesg.c:419
#, c-format
msgid "unknown facility '%s'"
msgstr "未知设施“%s”"

#: sys-utils/dmesg.c:547
#, c-format
msgid "cannot mmap: %s"
msgstr "无法 mmap：%s"

#. TRANSLATORS: dmesg uses strftime() fo generate date-time string
#. where %a is abbreviated name of the day, %b is abbreviated month
#. name and %e is day of the month as a decimal number. Please, set
#. proper month/day order here
#: sys-utils/dmesg.c:863
msgid "%a %b %e %H:%M:%S %Y"
msgstr ""

#. TRANSLATORS: dmesg uses strftime() fo generate date-time string
#. where: %b is abbreviated month and %e is day of the month as a
#. decimal number. Please, set proper month/day order here.
#: sys-utils/dmesg.c:873
msgid "%b%e %H:%M"
msgstr ""

#: sys-utils/dmesg.c:1526
msgid "invalid buffer size argument"
msgstr "无效的 缓冲区大小 参数"

#: sys-utils/dmesg.c:1612
msgid "--show-delta is ignored when used together with iso8601 time format"
msgstr "--show-delta 与 iso8601 时间格式共用时将忽略"

#: sys-utils/dmesg.c:1636
msgid "--raw can be used together with --level or --facility only when reading messages from /dev/kmsg"
msgstr "只有从 /dev/kmsg 读消息时，--raw 才可与 --level 或 --facility 共用"

#: sys-utils/dmesg.c:1656
msgid "read kernel buffer failed"
msgstr "读取内核缓冲区失败"

#: sys-utils/dmesg.c:1664
msgid "clear kernel buffer failed"
msgstr "清除内核缓冲区失败"

#: sys-utils/dmesg.c:1680
msgid "klogctl failed"
msgstr "klogctl 失败"

#: sys-utils/eject.c:140
#, c-format
msgid " %s [options] [<device>|<mountpoint>]\n"
msgstr " %s [选项] [<设备>|<挂臷点>]\n"

#: sys-utils/eject.c:143
msgid "Eject removable media.\n"
msgstr "弹出可移动媒体 \n"

#: sys-utils/eject.c:146
msgid ""
" -a, --auto <on|off>         turn auto-eject feature on or off\n"
" -c, --changerslot <slot>    switch discs on a CD-ROM changer\n"
" -d, --default               display default device\n"
" -f, --floppy                eject floppy\n"
" -F, --force                 don't care about device type\n"
" -i, --manualeject <on|off>  toggle manual eject protection on/off\n"
" -m, --no-unmount            do not unmount device even if it is mounted\n"
" -M, --no-partitions-unmount do not unmount another partitions\n"
" -n, --noop                  don't eject, just show device found\n"
" -p, --proc                  use /proc/mounts instead of /etc/mtab\n"
" -q, --tape                  eject tape\n"
" -r, --cdrom                 eject CD-ROM\n"
" -s, --scsi                  eject SCSI device\n"
" -t, --trayclose             close tray\n"
" -T, --traytoggle            toggle tray\n"
" -v, --verbose               enable verbose output\n"
" -x, --cdspeed <speed>       set CD-ROM max speed\n"
" -X, --listspeed             list CD-ROM available speeds\n"
msgstr ""
" -a, --auto <on|off>         打开/关闭自动弹出功能\n"
" -c, --changerslot <插槽>    在指定 CD-ROM 更换器上换盘\n"
" -d, --default               显示默认设备\n"
" -f, --floppy                弹出软盘\n"
" -F, --force                 无视设备类型\n"
" -i, --manualeject <on|off>  切换手动弹出保护开/关\n"
" -m, --no-unmount            不卸载设备，即使它已挂臷\n"
" -M, --no-partitions-unmount 不卸载另外的分区\n"
" -n, --noop                  不弹出，只显示找到的设备\n"
" -p, --proc                  使用 /proc/mounts 代替 /etc/mtab\n"
" -q, --tape                  弹出磁带\n"
" -r, --cdrom                 弹出 CD-ROM\n"
" -s, --scsi                  弹出 SCSI 设备\n"
" -t, --trayclose             关闭托盘\n"
" -T, --traytoggle            开关托盘\n"
" -v, --verbose               启用详尽输出\n"
" -x, --cdspeed <速度>        设置 CD-ROM 最高速度\n"
" -X, --listspeed             列出 CD-ROM 可用速度\n"

#: sys-utils/eject.c:169
msgid ""
"\n"
"By default tries -r, -s, -f, and -q in order until success.\n"
msgstr ""
"\n"
"默认将依次尝试 -r、-s、-f 和 -q 直到成功。\n"

#: sys-utils/eject.c:215
msgid "invalid argument to --changerslot/-c option"
msgstr "--changerslot/-c 选项的参数无效"

#: sys-utils/eject.c:219
msgid "invalid argument to --cdspeed/-x option"
msgstr "--cdspeed/-x 选项的参数无效"

#: sys-utils/eject.c:327
msgid "CD-ROM auto-eject command failed"
msgstr "CD-ROM 自动弹出命令失败"

#: sys-utils/eject.c:341
msgid "CD-ROM door lock is not supported"
msgstr "不支持光盘仓门锁"

#: sys-utils/eject.c:343
msgid "other users have the drive open and not CAP_SYS_ADMIN"
msgstr "其他用户开启了驱动器仓门，并且非 CAP_SYS_ADMIN"

#: sys-utils/eject.c:345
msgid "CD-ROM lock door command failed"
msgstr "CD-ROM 锁仓门命令失败"

#: sys-utils/eject.c:350
msgid "CD-Drive may NOT be ejected with device button"
msgstr "CD 驱动器不能通过设备上的按钮弹出"

#: sys-utils/eject.c:352
msgid "CD-Drive may be ejected with device button"
msgstr "CD 驱动器可以通过设备上的按钮弹出"

#: sys-utils/eject.c:363
msgid "CD-ROM select disc command failed"
msgstr "CD-ROM 选择光盘命令失败"

#: sys-utils/eject.c:367
msgid "CD-ROM load from slot command failed"
msgstr "CD-ROM 从槽加载命令失败"

#: sys-utils/eject.c:369
msgid "IDE/ATAPI CD-ROM changer not supported by this kernel\n"
msgstr "此内核不支持 IDE/ATAPI CD-ROM\n"

#: sys-utils/eject.c:387
msgid "CD-ROM tray close command failed"
msgstr "CD-ROM 关闭仓门命令失败"

#: sys-utils/eject.c:389
msgid "CD-ROM tray close command not supported by this kernel\n"
msgstr "此内核不支持 CD-ROM 关闭仓门命令\n"

#: sys-utils/eject.c:406
msgid "CD-ROM eject unsupported"
msgstr "不支持 CD-ROM 弹出"

#: sys-utils/eject.c:434 sys-utils/eject.c:457 sys-utils/eject.c:1018
msgid "CD-ROM eject command failed"
msgstr "CD-ROM 弹出命令失败"

#: sys-utils/eject.c:437
msgid "no CD-ROM information available"
msgstr "没有可用的 CD-ROM 信息"

#: sys-utils/eject.c:440
msgid "CD-ROM drive is not ready"
msgstr "CD-ROM 驱动器未就绪"

#: sys-utils/eject.c:443
msgid "CD-ROM status command failed"
msgstr "CD-ROM 状态命令失败"

#: sys-utils/eject.c:483
msgid "CD-ROM select speed command failed"
msgstr "CD-ROM 选择速度命令失败"

#: sys-utils/eject.c:485
msgid "CD-ROM select speed command not supported by this kernel"
msgstr "此内核不支持 CD-ROM 选择速度命令"

#: sys-utils/eject.c:522
#, c-format
msgid "%s: failed to finding CD-ROM name"
msgstr "%s：获取 CD-ROM 名称失败"

#: sys-utils/eject.c:539
#, c-format
msgid "%s: failed to read speed"
msgstr "%s：读 速度 失败"

#: sys-utils/eject.c:545
msgid "failed to read speed"
msgstr "读 速度 失败"

#: sys-utils/eject.c:585
msgid "not an sg device, or old sg driver"
msgstr "不是 sg 设备，或为旧 sg 驱动"

#: sys-utils/eject.c:657
#, c-format
msgid "%s: unmounting"
msgstr "%s：正在卸载"

#: sys-utils/eject.c:662 sys-utils/mount.c:59 sys-utils/umount.c:122
#: text-utils/more.c:1271
#, fuzzy
#| msgid "permission denied"
msgid "drop permissions failed"
msgstr "权限不足"

#: sys-utils/eject.c:671
msgid "unable to fork"
msgstr "无法 fork"

#: sys-utils/eject.c:678
#, c-format
msgid "unmount of `%s' did not exit normally"
msgstr "卸载“%s”未正常退出"

#: sys-utils/eject.c:681
#, c-format
msgid "unmount of `%s' failed\n"
msgstr "挂臷“%s”失败\n"

#: sys-utils/eject.c:726
msgid "failed to parse mount table"
msgstr "解析挂臷表失败"

#: sys-utils/eject.c:792 sys-utils/eject.c:894
#, c-format
msgid "%s: mounted on %s"
msgstr "%s：已挂臷于 %s"

#: sys-utils/eject.c:835
msgid "setting CD-ROM speed to auto"
msgstr "正在将 CD-ROM 速度设置为自动"

#: sys-utils/eject.c:837
#, c-format
msgid "setting CD-ROM speed to %ldX"
msgstr "正在将 CD-ROM 速度设置为 %ldX"

#: sys-utils/eject.c:863
#, c-format
msgid "default device: `%s'"
msgstr "默认设备：“%s”"

#: sys-utils/eject.c:869
#, c-format
msgid "using default device `%s'"
msgstr "使用默认设备“%s”"

#: sys-utils/eject.c:888
msgid "unable to find device"
msgstr "找不到设备"

#: sys-utils/eject.c:890
#, c-format
msgid "device name is `%s'"
msgstr "设备名称为“%s”"

#: sys-utils/eject.c:896 sys-utils/umount.c:365 sys-utils/umount.c:389
#, c-format
msgid "%s: not mounted"
msgstr "%s：未挂载"

#: sys-utils/eject.c:900
#, c-format
msgid "%s: disc device: %s (disk device will be used for eject)"
msgstr "%s：盘设备：%s(盘设备将用于弹出)"

#: sys-utils/eject.c:908
#, c-format
msgid "%s: not found mountpoint or device with the given name"
msgstr "%s：未找到指定名称的挂载点或设备"

#: sys-utils/eject.c:911
#, c-format
msgid "%s: is whole-disk device"
msgstr "%s：是 整盘 设备"

#: sys-utils/eject.c:915
#, fuzzy, c-format
#| msgid "%s: is not hot-pluggable device"
msgid "%s: is not ejectable device"
msgstr "%s：不是热插拔设备"

#: sys-utils/eject.c:919
#, c-format
msgid "device is `%s'"
msgstr "设备是“%s”"

#: sys-utils/eject.c:920
msgid "exiting due to -n/--noop option"
msgstr "将因 -n/--noop 选项退出"

#: sys-utils/eject.c:934
#, c-format
msgid "%s: enabling auto-eject mode"
msgstr "%s：正在启用自动弹出模式"

#: sys-utils/eject.c:936
#, c-format
msgid "%s: disabling auto-eject mode"
msgstr "%s：正在禁用自动弹出模式"

#: sys-utils/eject.c:944
#, c-format
msgid "%s: closing tray"
msgstr "%s：正在关闭仓门"

#: sys-utils/eject.c:953
#, c-format
msgid "%s: toggling tray"
msgstr "%s：开关仓门"

#: sys-utils/eject.c:962
#, c-format
msgid "%s: listing CD-ROM speed"
msgstr "%s：正在列出 CD-ROM 速度"

#: sys-utils/eject.c:988
#, c-format
msgid "error: %s: device in use"
msgstr "错误：%s：设备正在使用"

#: sys-utils/eject.c:999
#, c-format
msgid "%s: selecting CD-ROM disc #%ld"
msgstr "%s：正在选择 CD-ROM 盘 #%ld"

#: sys-utils/eject.c:1015
#, c-format
msgid "%s: trying to eject using CD-ROM eject command"
msgstr "%s：正在尝试使用 CD-ROM 弹出命令弹出"

#: sys-utils/eject.c:1017
msgid "CD-ROM eject command succeeded"
msgstr "CD-ROM 弹出命令成功"

#: sys-utils/eject.c:1022
#, c-format
msgid "%s: trying to eject using SCSI commands"
msgstr "%s：正在尝试使用 SCSI 命令弹出"

#: sys-utils/eject.c:1024
msgid "SCSI eject succeeded"
msgstr "SCSI 弹出成功"

#: sys-utils/eject.c:1025
msgid "SCSI eject failed"
msgstr "SCSI 弹出失败"

#: sys-utils/eject.c:1029
#, c-format
msgid "%s: trying to eject using floppy eject command"
msgstr "%s：正在尝试使用软盘弹出命令弹出"

#: sys-utils/eject.c:1031
msgid "floppy eject command succeeded"
msgstr "软盘弹出命令成功"

#: sys-utils/eject.c:1032
msgid "floppy eject command failed"
msgstr "软盘弹出命令失败"

#: sys-utils/eject.c:1036
#, c-format
msgid "%s: trying to eject using tape offline command"
msgstr "%s：正在尝试使用磁带离线命令弹出"

#: sys-utils/eject.c:1038
msgid "tape offline command succeeded"
msgstr "磁带离线命令成功"

#: sys-utils/eject.c:1039
msgid "tape offline command failed"
msgstr "磁带离线命令失败"

#: sys-utils/eject.c:1043
msgid "unable to eject"
msgstr "无法弹出"

#: sys-utils/fallocate.c:84
#, c-format
msgid " %s [options] <filename>\n"
msgstr " %s [选项] <文件名>\n"

#: sys-utils/fallocate.c:87
msgid "Preallocate space to, or deallocate space from a file.\n"
msgstr "为文件预分配空间或从文件回收空间。\n"

#: sys-utils/fallocate.c:90
msgid " -c, --collapse-range remove a range from the file\n"
msgstr " -c, --collapse-range 移除文件中的某个范围\n"

#: sys-utils/fallocate.c:91
msgid " -d, --dig-holes      detect zeroes and replace with holes\n"
msgstr " -d, --dig-holes      检测零并替换为空洞\n"

#: sys-utils/fallocate.c:92
msgid " -i, --insert-range   insert a hole at range, shifting existing data\n"
msgstr ""

#: sys-utils/fallocate.c:93
msgid " -l, --length <num>   length for range operations, in bytes\n"
msgstr " -l, --length <数字>  范围操作的长度(字节数)\n"

#: sys-utils/fallocate.c:94
msgid " -n, --keep-size      maintain the apparent size of the file\n"
msgstr " -n, --keep-size      保持文件的显示大小\n"

#: sys-utils/fallocate.c:95
msgid " -o, --offset <num>   offset for range operations, in bytes\n"
msgstr " -o, --offset <数字>  范围操作的偏移量(字节数)\n"

#: sys-utils/fallocate.c:96
msgid " -p, --punch-hole     replace a range with a hole (implies -n)\n"
msgstr " -p, --punch-hole     将某个范围替换为空洞(连带打开 -n)\n"

#: sys-utils/fallocate.c:97
msgid " -z, --zero-range     zero and ensure allocation of a range\n"
msgstr " -z, --zero-range     清零并保证分配某个范围\n"

#: sys-utils/fallocate.c:99
msgid " -x, --posix          use posix_fallocate(3) instead of fallocate(2)\n"
msgstr " -x, --posix          使用 posix_fallocate(3) 而非 fallocate(2)\n"

#: sys-utils/fallocate.c:139
msgid "fallocate failed: keep size mode is unsupported"
msgstr "fallocate 失败；不支持保持大小(keep size) 模式"

#: sys-utils/fallocate.c:140 sys-utils/fallocate.c:149
msgid "fallocate failed"
msgstr "fallocate 失败"

#: sys-utils/fallocate.c:237
#, c-format
msgid "%s: read failed"
msgstr "%s：read 失败"

#: sys-utils/fallocate.c:281
#, c-format
msgid "%s: %s (%ju bytes) converted to sparse holes.\n"
msgstr "%s：已将 %s(%ju 字节) 转换为稀疏空洞。\n"

#: sys-utils/fallocate.c:361
msgid "posix_fallocate support is not compiled"
msgstr ""

#: sys-utils/fallocate.c:377 sys-utils/fsfreeze.c:106
msgid "no filename specified"
msgstr "未指定文件名"

#: sys-utils/fallocate.c:389 sys-utils/fallocate.c:395
msgid "invalid length value specified"
msgstr "指定的长度值无效"

#: sys-utils/fallocate.c:393
msgid "no length argument specified"
msgstr "没有指定长度参数"

#: sys-utils/fallocate.c:398
msgid "invalid offset value specified"
msgstr "指定的偏移值无效"

#: sys-utils/fallocate.c:421
#, fuzzy, c-format
#| msgid "%s: %s (%ju bytes) converted to sparse holes.\n"
msgid "%s: %s (%ju bytes) hole created.\n"
msgstr "%s：已将 %s(%ju 字节) 转换为稀疏空洞。\n"

#: sys-utils/fallocate.c:424
#, fuzzy, c-format
#| msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
msgid "%s: %s (%ju bytes) removed.\n"
msgstr "%s：%s (%<PRIu64> 字节) 已修剪\n"

#: sys-utils/fallocate.c:427
#, fuzzy, c-format
#| msgid "%s: %s (%ju bytes) converted to sparse holes.\n"
msgid "%s: %s (%ju bytes) inserted.\n"
msgstr "%s：已将 %s(%ju 字节) 转换为稀疏空洞。\n"

#: sys-utils/fallocate.c:430
#, fuzzy, c-format
#| msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
msgid "%s: %s (%ju bytes) zeroed.\n"
msgstr "%s：%s (%<PRIu64> 字节) 已修剪\n"

#: sys-utils/fallocate.c:433
#, fuzzy, c-format
#| msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
msgid "%s: %s (%ju bytes) allocated.\n"
msgstr "%s：%s (%<PRIu64> 字节) 已修剪\n"

#: sys-utils/flock.c:53
#, c-format
msgid ""
" %1$s [options] <file>|<directory> <command> [<argument>...]\n"
" %1$s [options] <file>|<directory> -c <command>\n"
" %1$s [options] <file descriptor number>\n"
msgstr ""
" %1$s [选项] <文件|目录> <命令> [<参数>...]\n"
" %1$s [选项] <文件|目录> -c <命令>\n"
" %1$s [选项] <文件描述符号码>\n"

#: sys-utils/flock.c:59
msgid "Manage file locks from shell scripts.\n"
msgstr "通过 shell 脚本管理文件锁。\n"

#: sys-utils/flock.c:62
msgid " -s, --shared             get a shared lock\n"
msgstr " -s, --shared             获取共享锁\n"

#: sys-utils/flock.c:63
msgid " -x, --exclusive          get an exclusive lock (default)\n"
msgstr " -x, --exclusive          获取排他锁(默认)\n"

#: sys-utils/flock.c:64
msgid " -u, --unlock             remove a lock\n"
msgstr " -u, --unlock             移除锁\n"

#: sys-utils/flock.c:65
msgid " -n, --nonblock           fail rather than wait\n"
msgstr " -n, --nonblock           失败而非等待\n"

#: sys-utils/flock.c:66
msgid " -w, --timeout <secs>     wait for a limited amount of time\n"
msgstr " -w, --timeout <秒>       等待限定的时间\n"

#: sys-utils/flock.c:67
msgid " -E, --conflict-exit-code <number>  exit code after conflict or timeout\n"
msgstr " -E, --conflict-exit-code <数字>     冲突或超时后的退出代码\n"

#: sys-utils/flock.c:68
msgid " -o, --close              close file descriptor before running command\n"
msgstr " -o, --close              运行命令前关闭文件描述符\n"

#: sys-utils/flock.c:69
msgid " -c, --command <command>  run a single command string through the shell\n"
msgstr " -c, --command <命令>      通过 shell 运行单个命令字符串\n"

#: sys-utils/flock.c:70
msgid " -F, --no-fork            execute command without forking\n"
msgstr " -F, --no-fork            执行命令时不 fork\n"

#: sys-utils/flock.c:71
msgid "     --verbose            increase verbosity\n"
msgstr "     --verbose            增加详尽程度\n"

#: sys-utils/flock.c:108
#, c-format
msgid "cannot open lock file %s"
msgstr "不能打开锁文件 %s"

#: sys-utils/flock.c:210
msgid "invalid timeout value"
msgstr "无效的 超时值"

#: sys-utils/flock.c:214
msgid "invalid exit code"
msgstr "无效退出代码"

#: sys-utils/flock.c:216
msgid "exit code out of range (expected 0 to 255)"
msgstr ""

#: sys-utils/flock.c:233
msgid "the --no-fork and --close options are incompatible"
msgstr "--no-fork 和 --close 选项不兼容"

#: sys-utils/flock.c:241
#, c-format
msgid "%s requires exactly one command argument"
msgstr "%s 需要惟一的命令行参数"

#: sys-utils/flock.c:259
msgid "bad file descriptor"
msgstr "错误的文件描述符"

#: sys-utils/flock.c:262
msgid "requires file descriptor, file or directory"
msgstr "需要文件描述符、文件或目录"

#: sys-utils/flock.c:286
msgid "failed to get lock"
msgstr "获取锁失败"

#: sys-utils/flock.c:293
msgid "timeout while waiting to get lock"
msgstr "等待获得锁超时"

#: sys-utils/flock.c:334
#, fuzzy, c-format
#| msgid "%s: getting lock took %ld.%06ld seconds\n"
msgid "%s: getting lock took %<PRId64>.%06<PRId64> seconds\n"
msgstr "%s：等待获得锁花了 %ld.%06ld 秒\n"

#: sys-utils/flock.c:346
#, c-format
msgid "%s: executing %s\n"
msgstr "%s: 正在执行 %s\n"

#: sys-utils/fsfreeze.c:41
#, c-format
msgid " %s [options] <mountpoint>\n"
msgstr " %s [选项] <挂臷点>\n"

#: sys-utils/fsfreeze.c:44
#, fuzzy
#| msgid "Mount a filesystem.\n"
msgid "Suspend access to a filesystem.\n"
msgstr "挂载文件系统。\n"

#: sys-utils/fsfreeze.c:47
msgid " -f, --freeze      freeze the filesystem\n"
msgstr " -f, --freeze      冻结文件系统\n"

#: sys-utils/fsfreeze.c:48
msgid " -u, --unfreeze    unfreeze the filesystem\n"
msgstr " -u, --unfreeze    解冻文件系统\n"

#: sys-utils/fsfreeze.c:104
msgid "neither --freeze or --unfreeze specified"
msgstr "既未指定 --freeze 也未指定 --unfreeze"

#: sys-utils/fsfreeze.c:124
#, c-format
msgid "%s: is not a directory"
msgstr "%s：不是目录"

#: sys-utils/fsfreeze.c:131
#, c-format
msgid "%s: freeze failed"
msgstr "%s：冻结失败"

#: sys-utils/fsfreeze.c:137
#, c-format
msgid "%s: unfreeze failed"
msgstr "%s：解冻失败"

#: sys-utils/fstrim.c:83
#, c-format
msgid "%s: not a directory"
msgstr "%s：不是一个目录"

#: sys-utils/fstrim.c:113
#, fuzzy, c-format
#| msgid "%s: %s mounted on %s.\n"
msgid "%s: 0 B (dry run) trimmed on %s\n"
msgstr "%s：%s 已挂臷到 %s。\n"

#: sys-utils/fstrim.c:115
#, c-format
msgid "%s: 0 B (dry run) trimmed\n"
msgstr ""

#: sys-utils/fstrim.c:133
#, c-format
msgid "%s: FITRIM ioctl failed"
msgstr "%s：FITRIM ioctl 失败"

#. TRANSLATORS: The standard value here is a very large number.
#: sys-utils/fstrim.c:143
#, fuzzy, c-format
#| msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
msgid "%s: %s (%<PRIu64> bytes) trimmed on %s\n"
msgstr "%s：%s (%<PRIu64> 字节) 已修剪\n"

#. TRANSLATORS: The standard value here is a very large number.
#: sys-utils/fstrim.c:147
#, c-format
msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
msgstr "%s：%s (%<PRIu64> 字节) 已修剪\n"

#: sys-utils/fstrim.c:290 sys-utils/lsns.c:1494 sys-utils/swapon.c:746
#: sys-utils/umount.c:271
#, c-format
msgid "failed to parse %s"
msgstr "解析 %s 失败"

#: sys-utils/fstrim.c:316
#, fuzzy
#| msgid "failed to allocate script handler"
msgid "failed to allocate FS handler"
msgstr "分配脚本处理程序失败"

#: sys-utils/fstrim.c:403 sys-utils/fstrim.c:591
#, c-format
msgid "%s: the discard operation is not supported"
msgstr "%s：不支持丢弃操作"

#: sys-utils/fstrim.c:454
#, c-format
msgid " %s [options] <mount point>\n"
msgstr " %s [选项] <挂臷点>\n"

#: sys-utils/fstrim.c:457
msgid "Discard unused blocks on a mounted filesystem.\n"
msgstr "忽略已挂载文件系统上的未用锁。\n"

#: sys-utils/fstrim.c:460
#, fuzzy
#| msgid " -a, --all               unmount all filesystems\n"
msgid " -a, --all                trim mounted filesystems\n"
msgstr " -a, --all               卸载所有文件系统\n"

#: sys-utils/fstrim.c:461
#, fuzzy
#| msgid " -a, --all           trim all mounted filesystems that are supported\n"
msgid " -A, --fstab              trim filesystems from /etc/fstab\n"
msgstr " -a, --all           修剪不支持的所有已挂载文件系统\n"

#: sys-utils/fstrim.c:462
#, fuzzy
#| msgid " -m, -p, --preserve-environment  do not reset environment variables\n"
msgid " -I, --listed-in <list>   trim filesystems listed in specified files\n"
msgstr " -m, -p, --preserve-environment  不重置环境变量\n"

#: sys-utils/fstrim.c:463
#, fuzzy
#| msgid " -o, --offset <num>  the offset in bytes to start discarding from\n"
msgid " -o, --offset <num>       the offset in bytes to start discarding from\n"
msgstr " -o, --offset <数字> 开始丢弃的偏移量(字节)\n"

#: sys-utils/fstrim.c:464
#, fuzzy
#| msgid " -l, --length <num>  the number of bytes to discard\n"
msgid " -l, --length <num>       the number of bytes to discard\n"
msgstr " -l, --length <数字> 要丢弃的字符数\n"

#: sys-utils/fstrim.c:465
#, fuzzy
#| msgid " -m, --minimum <num> the minimum extent length to discard\n"
msgid " -m, --minimum <num>      the minimum extent length to discard\n"
msgstr " -m, --minimum <数字> 要丢弃的最小限制长度\n"

#: sys-utils/fstrim.c:466
#, fuzzy
#| msgid " -t, --types <list>      limit the set of filesystem types\n"
msgid " -t, --types <list>       limit the set of filesystem types\n"
msgstr " -t, --types <列表>      限制文件系统集合\n"

#: sys-utils/fstrim.c:467
#, fuzzy
#| msgid " -v, --verbose       print number of discarded bytes\n"
msgid " -v, --verbose            print number of discarded bytes\n"
msgstr " -v, --verbose       打印丢弃的字节数\n"

#: sys-utils/fstrim.c:468
#, fuzzy
#| msgid " -q, --quiet               suppress extra info messages\n"
msgid "     --quiet-unsupported  suppress error messages if trim unsupported\n"
msgstr " -q, --quiet               禁止输出额外信息\n"

#: sys-utils/fstrim.c:469
#, fuzzy
#| msgid " -n, --dry-run            does everything, but suspend\n"
msgid " -n, --dry-run            does everything, but trim\n"
msgstr " -n, --dry-run            演示操作但不执行(suspend)\n"

#: sys-utils/fstrim.c:550
msgid "failed to parse minimum extent length"
msgstr "解析 最小范围长度 失败"

#: sys-utils/fstrim.c:572
msgid "no mountpoint specified"
msgstr "未指定挂载点"

#: sys-utils/hwclock.c:215
#, c-format
msgid "Assuming hardware clock is kept in %s time.\n"
msgstr "将假设硬件时钟保持为 %s 时间。\n"

#: sys-utils/hwclock.c:216 sys-utils/hwclock.c:286
msgid "UTC"
msgstr "UTC"

#: sys-utils/hwclock.c:216 sys-utils/hwclock.c:285
msgid "local"
msgstr "当地"

#: sys-utils/hwclock.c:258 sys-utils/hwclock.c:261
#, fuzzy, c-format
#| msgid ""
#| "Warning: unrecognized third line in adjtime file\n"
#| "(Expected: `UTC' or `LOCAL' or nothing.)"
msgid "Warning: unrecognized line in adjtime file: %s"
msgstr ""
"警告：adjtime 文件第三行无法识别\n"
"(应为：“UTC”或“LOCAL”或空)"

#: sys-utils/hwclock.c:273
msgid ""
"Warning: unrecognized third line in adjtime file\n"
"(Expected: `UTC' or `LOCAL' or nothing.)"
msgstr ""
"警告：adjtime 文件第三行无法识别\n"
"(应为：“UTC”或“LOCAL”或空)"

#: sys-utils/hwclock.c:279
#, fuzzy, c-format
#| msgid "Last drift adjustment done at %ld seconds after 1969\n"
msgid "Last drift adjustment done at %<PRId64> seconds after 1969\n"
msgstr "上次漂移调整完成于1969(年)后 %ld 秒\n"

#: sys-utils/hwclock.c:281
#, fuzzy, c-format
#| msgid "Last calibration done at %ld seconds after 1969\n"
msgid "Last calibration done at %<PRId64> seconds after 1969\n"
msgstr "上次校准完成于1969(年)后 %ld 秒\n"

#: sys-utils/hwclock.c:283
#, c-format
msgid "Hardware clock is on %s time\n"
msgstr "硬件时钟为 %s 时间\n"

#: sys-utils/hwclock.c:310
#, c-format
msgid "Waiting for clock tick...\n"
msgstr "正在等待时钟滴答...\n"

#: sys-utils/hwclock.c:316
#, c-format
msgid "...synchronization failed\n"
msgstr "...同步失败\n"

#: sys-utils/hwclock.c:318
#, c-format
msgid "...got clock tick\n"
msgstr "...已获取时钟滴答\n"

#: sys-utils/hwclock.c:359
#, c-format
msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
msgstr "硬件时钟值无效：%4d/%.2d/%.2d %.2d:%.2d:%.2d\n"

#: sys-utils/hwclock.c:366
#, fuzzy, c-format
#| msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %<PRId64> seconds since 1969\n"
msgstr "硬件时钟时间：%4d/%.2d/%.2d %.2d:%.2d:%.2d = 1969(年)后 %ld 秒\n"

#: sys-utils/hwclock.c:392
#, c-format
msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
msgstr "从硬件时钟读取的时间：%4d/%.2d/%.2d %02d:%02d:%02d\n"

#: sys-utils/hwclock.c:419
#, fuzzy, c-format
#| msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %<PRId64> seconds since 1969\n"
msgstr "正在将硬件时钟设置为 %.2d:%.2d:%.2d = 1969(年)后 %ld 秒\n"

#: sys-utils/hwclock.c:455
#, c-format
msgid "RTC type: '%s'\n"
msgstr "RTC 类型：“%s”\n"

#: sys-utils/hwclock.c:555
#, fuzzy, c-format
#| msgid "%s  %.6f seconds\n"
msgid "Using delay: %.6f seconds\n"
msgstr "%s  %.6f 秒\n"

#: sys-utils/hwclock.c:574
#, fuzzy, c-format
#| msgid "time jumped backward %.6f seconds to %ld.%06ld - retargeting\n"
msgid "time jumped backward %.6f seconds to %<PRId64>.%06<PRId64> - retargeting\n"
msgstr "时间倒退了 %.6f 秒到 %ld.%06ld - 正在重新定位\n"

#: sys-utils/hwclock.c:596
#, fuzzy, c-format
#| msgid "missed it - %ld.%06ld is too far past %ld.%06ld (%.6f > %.6f)\n"
msgid "missed it - %<PRId64>.%06<PRId64> is too far past %<PRId64>.%06<PRId64> (%.6f > %.6f)\n"
msgstr "错过了- %ld.%06ld 在 %ld.%06ld 之后太长时间了(%.6f > %.6f)\n"

#: sys-utils/hwclock.c:623
#, fuzzy, c-format
#| msgid ""
#| "%ld.%06ld is close enough to %ld.%06ld (%.6f < %.6f)\n"
#| "Set RTC to %ld (%ld + %d; refsystime = %ld.%06ld)\n"
msgid ""
"%<PRId64>.%06<PRId64> is close enough to %<PRId64>.%06<PRId64> (%.6f < %.6f)\n"
"Set RTC to %<PRId64> (%<PRId64> + %d; refsystime = %<PRId64>.%06<PRId64>)\n"
msgstr ""
"%ld.%06d 距 %ld.%06d 太近(%.6f < %.6f)\n"
"请将 RTC 设为 %ld (%ld + %d; refsystime = %ld.%06d)\n"

#: sys-utils/hwclock.c:717
#, fuzzy
#| msgid "Calling settimeofday(NULL, %d) "
msgid "Calling settimeofday(NULL, 0) to lock the warp_clock function."
msgstr "正在调用 settimeofday(NULL, %d)"

#: sys-utils/hwclock.c:720
#, fuzzy, c-format
#| msgid "Calling settimeofday(NULL, %d) "
msgid "Calling settimeofday(NULL, %d) to set the kernel timezone.\n"
msgstr "正在调用 settimeofday(NULL, %d)"

#: sys-utils/hwclock.c:724
#, c-format
msgid "Calling settimeofday(NULL, %d) to warp System time, set PCIL and the kernel tz.\n"
msgstr ""

#: sys-utils/hwclock.c:729
#, fuzzy, c-format
#| msgid "Calling settimeofday:\n"
msgid "Calling settimeofday(%<PRId64>.%06<PRId64>, NULL) to set the System time.\n"
msgstr "正在调用 settimeofday：\n"

#: sys-utils/hwclock.c:751
msgid "settimeofday() failed"
msgstr "settimeofday() 失败"

#: sys-utils/hwclock.c:775
#, c-format
msgid "Not adjusting drift factor because the --update-drift option was not used.\n"
msgstr "将不调整漂移系数，因为没有使用 --update-drift 选项。\n"

#: sys-utils/hwclock.c:779
#, c-format
msgid ""
"Not adjusting drift factor because last calibration time is zero,\n"
"so history is bad and calibration startover is necessary.\n"
msgstr ""
"将不调整漂移系数，因为上次校准时间为零，\n"
"历史有问题；需要启动校准。\n"

#: sys-utils/hwclock.c:785
#, c-format
msgid "Not adjusting drift factor because it has been less than four hours since the last calibration.\n"
msgstr "将不调整漂移系数，因为距上次校正不到四个小时。\n"

#: sys-utils/hwclock.c:823
#, c-format
msgid ""
"Clock drift factor was calculated as %f seconds/day.\n"
"It is far too much. Resetting to zero.\n"
msgstr ""
"时钟漂移系数会按 %f 秒/天计算。\n"
"系数过大，将重置为 0。\n"

#: sys-utils/hwclock.c:830
#, fuzzy, c-format
#| msgid ""
#| "Clock drifted %f seconds in the past %f seconds\n"
#| "in spite of a drift factor of %f seconds/day.\n"
#| "Adjusting drift factor by %f seconds/day\n"
msgid ""
"Clock drifted %f seconds in the past %f seconds\n"
"in spite of a drift factor of %f seconds/day.\n"
"Adjusting drift factor by %f seconds/day\n"
msgstr "在过去的 %2$d 秒内，时钟漂移了 %1$.1f 秒，而漂移系数为 %3$f 秒/天。会将漂移系数调整 %4$f 秒/天\n"

#: sys-utils/hwclock.c:874
#, fuzzy, c-format
#| msgid "Time since last adjustment is %d second\n"
#| msgid_plural "Time since last adjustment is %d seconds\n"
msgid "Time since last adjustment is %<PRId64> second\n"
msgid_plural "Time since last adjustment is %<PRId64> seconds\n"
msgstr[0] "距上次调整的时间为 %d 秒\n"

#: sys-utils/hwclock.c:878
#, fuzzy, c-format
#| msgid "Calculated Hardware Clock drift is %ld.%06ld seconds\n"
msgid "Calculated Hardware Clock drift is %<PRId64>.%06<PRId64> seconds\n"
msgstr "计算出的硬件锁偏差为 %ld.%06ld 秒\n"

#: sys-utils/hwclock.c:903
#, c-format
msgid ""
"New %s data:\n"
"%s"
msgstr ""

#: sys-utils/hwclock.c:920
#, c-format
msgid "cannot update %s"
msgstr "无法更新 %s"

#: sys-utils/hwclock.c:956
#, c-format
msgid "Not setting clock because last adjustment time is zero, so history is bad.\n"
msgstr "将不设置时钟，因为上次调整时间为零，历史有误。\n"

#: sys-utils/hwclock.c:960
#, c-format
msgid "Not setting clock because drift factor %f is far too high.\n"
msgstr "将不设置时钟，因为上次漂移系数 %f 过高。\n"

#: sys-utils/hwclock.c:990
#, c-format
msgid "No usable clock interface found.\n"
msgstr "未找到可用的时钟接口。\n"

#: sys-utils/hwclock.c:992
msgid "Cannot access the Hardware Clock via any known method."
msgstr "无法通过已知的任何方式访问硬件时钟。"

#: sys-utils/hwclock.c:996
#, fuzzy
#| msgid "Use the --debug option to see the details of our search for an access method."
msgid "Use the --verbose option to see the details of our search for an access method."
msgstr "请使用 --debug 选项来观察程序搜索访问方法的详情。"

#: sys-utils/hwclock.c:1046
#, c-format
msgid "Target date:   %<PRId64>\n"
msgstr ""

#: sys-utils/hwclock.c:1047
#, c-format
msgid "Predicted RTC: %<PRId64>\n"
msgstr ""

#: sys-utils/hwclock.c:1077
msgid "RTC read returned an invalid value."
msgstr ""

#: sys-utils/hwclock.c:1107
#, c-format
msgid "Needed adjustment is less than one second, so not setting clock.\n"
msgstr "需要的调整不到一秒，将不设置时钟。\n"

#: sys-utils/hwclock.c:1144
#, fuzzy
#| msgid "unable to read super block"
msgid "unable to read the RTC epoch."
msgstr "不能读超级块"

#: sys-utils/hwclock.c:1146
#, c-format
msgid "The RTC epoch is set to %lu.\n"
msgstr ""

#: sys-utils/hwclock.c:1149
msgid "--epoch is required for --setepoch."
msgstr ""

#: sys-utils/hwclock.c:1152
#, fuzzy
#| msgid "Unable to set system clock.\n"
msgid "unable to set the RTC epoch."
msgstr "无法设置系统时钟。\n"

#: sys-utils/hwclock.c:1165
#, fuzzy, c-format
#| msgid "unable to read super block"
msgid "unable to read the RTC parameter %s"
msgstr "不能读超级块"

#: sys-utils/hwclock.c:1170
#, c-format
msgid "The RTC parameter 0x%jx is set to 0x%jx.\n"
msgstr ""

#: sys-utils/hwclock.c:1198
#, fuzzy, c-format
#| msgid " hwclock [function] [option...]\n"
msgid " %s [function] [option...]\n"
msgstr " hwclock [功能] [选项...]\n"

#: sys-utils/hwclock.c:1201
msgid "Time clocks utility."
msgstr ""

#: sys-utils/hwclock.c:1204
#, fuzzy
#| msgid " -r, --show           display the RTC time"
msgid " -r, --show                      display the RTC time"
msgstr " -r, --show           显示 RTC 时间"

#: sys-utils/hwclock.c:1205
#, fuzzy
#| msgid " -Z, --context            display SELinux contexts\n"
msgid "     --get                       display drift corrected RTC time"
msgstr " -Z, --context            显示 SELinux 环境\n"

#: sys-utils/hwclock.c:1206
#, fuzzy
#| msgid " -r, --reset                  reset the port\n"
msgid "     --set                       set the RTC according to --date"
msgstr " -r, --reset                  重置端口\n"

#: sys-utils/hwclock.c:1207
#, fuzzy
#| msgid " -r, --reset                  reset the port\n"
msgid " -s, --hctosys                   set the system time from the RTC"
msgstr " -r, --reset                  重置端口\n"

#: sys-utils/hwclock.c:1208
#, fuzzy
#| msgid " -t, --types <list>      limit the set of filesystem types\n"
msgid " -w, --systohc                   set the RTC from the system time"
msgstr " -t, --types <列表>      限制文件系统集合\n"

#: sys-utils/hwclock.c:1209
#, fuzzy
#| msgid "                               set vesa powersaving features\n"
msgid "     --systz                     send timescale configurations to the kernel"
msgstr "                               设置 vesa 节能功能\n"

#: sys-utils/hwclock.c:1210
#, fuzzy
#| msgid " -J, --json                    use JSON --list output format\n"
msgid " -a, --adjust                    adjust the RTC to account for systematic drift"
msgstr " -J, --json                    使用 JSON --list 输出格式\n"

#: sys-utils/hwclock.c:1212
#, fuzzy
#| msgid "     --help                 display this help and exit\n"
msgid "     --getepoch                  display the RTC epoch"
msgstr "     --help                 显示此帮助并退出\n"

#: sys-utils/hwclock.c:1213
#, fuzzy
#| msgid " -r, --reset                  reset the port\n"
msgid "     --setepoch                  set the RTC epoch according to --epoch"
msgstr " -r, --reset                  重置端口\n"

#: sys-utils/hwclock.c:1216
#, fuzzy
#| msgid "     --help                 display this help and exit\n"
msgid "     --param-get <param>         display the RTC parameter"
msgstr "     --help                 显示此帮助并退出\n"

#: sys-utils/hwclock.c:1217
msgid "     --param-set <param>=<value> set the RTC parameter"
msgstr ""

#: sys-utils/hwclock.c:1219
#, fuzzy
#| msgid " -r, --reset                  reset the port\n"
msgid "     --predict                   predict the drifted RTC time according to --date"
msgstr " -r, --reset                  重置端口\n"

#: sys-utils/hwclock.c:1221
#, fuzzy
#| msgid " -u, --utc                RTC uses UTC\n"
msgid " -u, --utc                       the RTC timescale is UTC"
msgstr " -u, --utc                RTC 使用 UTC\n"

#: sys-utils/hwclock.c:1222
#, fuzzy
#| msgid " -l, --local              RTC uses local timezone\n"
msgid " -l, --localtime                 the RTC timescale is Local"
msgstr " -l, --local              RTC 使用本地时区\n"

#: sys-utils/hwclock.c:1225
#, fuzzy, c-format
#| msgid " -f, --file <file>    use a specific file instead of %s\n"
msgid " -f, --rtc <file>                use an alternate file to %1$s\n"
msgstr " -F, --file <文件>    用指定文件代替 %s\n"

#: sys-utils/hwclock.c:1228
#, fuzzy, c-format
#| msgid "     --raw                 use raw status output format\n"
msgid "     --directisa                 use the ISA bus instead of %1$s access\n"
msgstr "     --raw                 使用原生状态输出格式\n"

#: sys-utils/hwclock.c:1229
#, fuzzy
#| msgid "     --date <time>    date/time input for --set and --predict"
msgid "     --date <time>               date/time input for --set and --predict"
msgstr "     --date <时间戳>  指定用于 --set 和 --predict 的日期/时间输入"

#: sys-utils/hwclock.c:1230
#, fuzzy
#| msgid " -Z, --context            display SELinux contexts\n"
msgid "     --delay <sec>               delay used when set new RTC time"
msgstr " -Z, --context            显示 SELinux 环境\n"

#: sys-utils/hwclock.c:1232
msgid "     --epoch <year>              epoch input for --setepoch"
msgstr ""

#: sys-utils/hwclock.c:1234
#, fuzzy
#| msgid " -r, --reset                  reset the port\n"
msgid "     --update-drift              update the RTC drift factor"
msgstr " -r, --reset                  重置端口\n"

#: sys-utils/hwclock.c:1236
#, fuzzy, c-format
#| msgid "     --noadjfile      do not use %1$s\n"
msgid "     --noadjfile                 do not use %1$s\n"
msgstr "     --noadjfile      不使用 %1$s\n"

#: sys-utils/hwclock.c:1238
#, fuzzy, c-format
#| msgid " -f, --file <file>    use a specific file instead of %s\n"
msgid "     --adjfile <file>            use an alternate file to %1$s\n"
msgstr " -F, --file <文件>    用指定文件代替 %s\n"

#: sys-utils/hwclock.c:1239
#, fuzzy
#| msgid "     --test           dry run; implies --verbose"
msgid "     --test                      dry run; implies --verbose"
msgstr "     --test           测试运行；隐含启用 --verbose"

#: sys-utils/hwclock.c:1240
#, fuzzy
#| msgid " -v, --verbose          display more details\n"
msgid " -v, --verbose                   display more details"
msgstr " -v, --verbose          显示更多细节\n"

#: sys-utils/hwclock.c:1247
msgid " <param> is either a numeric RTC parameter value or one of these aliases:"
msgstr ""

#: sys-utils/hwclock.c:1250
#, c-format
msgid "   - %1$s: %2$s (0x%3$x)\n"
msgstr ""

#: sys-utils/hwclock.c:1254
msgid "   See Kernel's include/uapi/linux/rtc.h for parameters and values."
msgstr ""

#: sys-utils/hwclock.c:1256
msgid " <param> and <value> accept hexadecimal values if prefixed with 0x, otherwise decimal."
msgstr ""

#: sys-utils/hwclock.c:1357
msgid "Unable to connect to audit system"
msgstr "无法连接到审计系统"

#: sys-utils/hwclock.c:1381
msgid "use --verbose, --debug has been deprecated."
msgstr ""

#: sys-utils/hwclock.c:1494
#, fuzzy, c-format
#| msgid "too many arguments"
msgid "%d too many arguments given"
msgstr "参数过多"

#: sys-utils/hwclock.c:1502
msgid "--update-drift requires --set or --systohc"
msgstr ""

#: sys-utils/hwclock.c:1507
msgid "With --noadjfile, you must specify either --utc or --localtime"
msgstr "指定 --noadjfile 时，您必须指定 --utc 或 --localtime"

#: sys-utils/hwclock.c:1514
msgid "--date is required for --set or --predict"
msgstr ""

#: sys-utils/hwclock.c:1531
#, c-format
msgid "invalid date '%s'"
msgstr "无效日期“%s”"

#: sys-utils/hwclock.c:1554
#, fuzzy, c-format
#| msgid "Current system time: %ld = %s\n"
msgid "System Time: %<PRId64>.%06<PRId64>\n"
msgstr "当前系统时间：%ld = %s\n"

#: sys-utils/hwclock.c:1571
msgid "Test mode: nothing was changed."
msgstr "演示模式：无实际修改。"

#: sys-utils/hwclock-cmos.c:360
msgid "ISA port access is not implemented"
msgstr "未实现 ISA 端口访问"

#: sys-utils/hwclock-cmos.c:362
msgid "iopl() port access failed"
msgstr "iopl() 端口访问失败"

#: sys-utils/hwclock-cmos.c:373
#, fuzzy
#| msgid "Using direct I/O instructions to ISA clock."
msgid "Using direct ISA access to the clock"
msgstr "将对 ISA 时钟使用直接 I/O 指令。"

#: sys-utils/hwclock-rtc.c:48
#, fuzzy
#| msgid "unsupported filesystem features"
msgid "supported features"
msgstr "不支持的文件系统特性"

#: sys-utils/hwclock-rtc.c:49
msgid "time correction"
msgstr ""

#: sys-utils/hwclock-rtc.c:50
msgid "backup switch mode"
msgstr ""

#: sys-utils/hwclock-rtc.c:101
#, c-format
msgid "Trying to open: %s\n"
msgstr "正在尝试打开：%s\n"

#: sys-utils/hwclock-rtc.c:126 sys-utils/hwclock-rtc.c:216
msgid "cannot open rtc device"
msgstr "无法打开 rtc 设备"

#: sys-utils/hwclock-rtc.c:140
#, fuzzy, c-format
#| msgid "ioctl(%s) to %s to read the time failed"
msgid "ioctl(RTC_RD_NAME) to %s to read the time failed"
msgstr "对 %2$s 的读取时间 ioctl(%1$s) 失败"

#: sys-utils/hwclock-rtc.c:177
#, c-format
msgid "Waiting in loop for time from %s to change\n"
msgstr "正在循环等待来自 %s 的时间更改\n"

#: sys-utils/hwclock-rtc.c:196
msgid "Timed out waiting for time change."
msgstr "等待时间更改超时。"

#: sys-utils/hwclock-rtc.c:244
#, c-format
msgid "select() to %s to wait for clock tick timed out"
msgstr "对 %s select() 以等待时钟嘀嗒超时"

#: sys-utils/hwclock-rtc.c:247
#, c-format
msgid "select() to %s to wait for clock tick failed"
msgstr "对 %s select() 以等待时钟嘀嗒失败"

#: sys-utils/hwclock-rtc.c:252
#, c-format
msgid "ioctl() to %s to turn off update interrupts failed"
msgstr "对 %s ioctl() 以关闭更新中断失败"

#: sys-utils/hwclock-rtc.c:258
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_UIE_ON, 0) to %s failed"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/hwclock-rtc.c:303
#, fuzzy, c-format
#| msgid "ioctl(%s) to %s to set the time failed."
msgid "ioctl(RTC_SET_TIME) to %s to set the time failed"
msgstr "对 %2$s ioctl(%1$s) 以设置时间失败。"

#: sys-utils/hwclock-rtc.c:309
#, fuzzy, c-format
#| msgid "ioctl(%s) was successful.\n"
msgid "ioctl(RTC_SET_TIME) was successful.\n"
msgstr "ioctl(%s) 成功。\n"

#: sys-utils/hwclock-rtc.c:325
#, fuzzy
#| msgid "Using the /dev interface to the clock."
msgid "Using the rtc interface to the clock."
msgstr "将对时钟使用 /dev 接口。"

#: sys-utils/hwclock-rtc.c:358
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgid "ioctl(%d, RTC_EPOCH_READ, epoch_p) to %s failed"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_READ) 失败"

#: sys-utils/hwclock-rtc.c:364
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgid "ioctl(%d, RTC_EPOCH_READ, epoch_p) to %s succeeded.\n"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_READ) 失败"

#: sys-utils/hwclock-rtc.c:383
#, fuzzy, c-format
#| msgid "invalid epoch argument"
msgid "invalid epoch '%s'."
msgstr "无效的纪元(epoch)参数"

#: sys-utils/hwclock-rtc.c:394
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_EPOCH_SET, %lu) to %s failed"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/hwclock-rtc.c:400
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_EPOCH_SET, %lu) to %s succeeded.\n"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/hwclock-rtc.c:442 sys-utils/hwclock-rtc.c:484
msgid "could not convert parameter name to number"
msgstr ""

#: sys-utils/hwclock-rtc.c:454
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_PARAM_GET, param) to %s failed"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/hwclock-rtc.c:465
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_PARAM_GET, param) to %s succeeded.\n"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/hwclock-rtc.c:491
msgid "expected <param>=<value>"
msgstr ""

#: sys-utils/hwclock-rtc.c:495
msgid "could not convert parameter value to number"
msgstr ""

#: sys-utils/hwclock-rtc.c:507
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_PARAM_SET, param) to %s failed"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/hwclock-rtc.c:513
#, fuzzy, c-format
#| msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgid "ioctl(%d, RTC_PARAM_SET, param) to %s succeeded.\n"
msgstr "对 %s 进行 ioctl(RTC_EPOCH_SET) 失败"

#: sys-utils/ipcmk.c:70
msgid "Create various IPC resources.\n"
msgstr "创建各种 IPC 资源。\n"

#: sys-utils/ipcmk.c:73
msgid " -M, --shmem <size>       create shared memory segment of size <size>\n"
msgstr " -M, --shmem <尺寸>       创建大小为指定<尺寸>的共享内存段。\n"

#: sys-utils/ipcmk.c:74
msgid " -S, --semaphore <number> create semaphore array with <number> elements\n"
msgstr " -S, --semaphore <数字>   创建包含 <数字> 个元素的信号量\n"

#: sys-utils/ipcmk.c:75
msgid " -Q, --queue              create message queue\n"
msgstr " -Q, --queue              创建消息队列\n"

#: sys-utils/ipcmk.c:76
msgid " -p, --mode <mode>        permission for the resource (default is 0644)\n"
msgstr " -p, --mode <模式>        资源的权限模式掩码(默认为 0644)\n"

#: sys-utils/ipcmk.c:82 sys-utils/zramctl.c:565
#, fuzzy
#| msgid "size"
msgid "<size>"
msgstr "大小"

#: sys-utils/ipcmk.c:114 sys-utils/losetup.c:737 sys-utils/zramctl.c:653
msgid "failed to parse size"
msgstr "解析大小失败"

#: sys-utils/ipcmk.c:121
msgid "failed to parse elements"
msgstr "解析元素失败"

#: sys-utils/ipcmk.c:130
#, fuzzy
#| msgid "failed to parse id"
msgid "failed to parse mode"
msgstr "解析 id 失败"

#: sys-utils/ipcmk.c:149
msgid "create share memory failed"
msgstr "创建共享内存失败"

#: sys-utils/ipcmk.c:151
#, c-format
msgid "Shared memory id: %d\n"
msgstr "共享内存 id：%d\n"

#: sys-utils/ipcmk.c:157
msgid "create message queue failed"
msgstr "创建消息队列失败"

#: sys-utils/ipcmk.c:159
#, c-format
msgid "Message queue id: %d\n"
msgstr "消息队列 id：%d\n"

#: sys-utils/ipcmk.c:165
msgid "create semaphore failed"
msgstr "创建信号量失败"

#: sys-utils/ipcmk.c:167
#, c-format
msgid "Semaphore id: %d\n"
msgstr "信号量 id：%d\n"

#: sys-utils/ipcrm.c:51
#, c-format
msgid ""
" %1$s [options]\n"
" %1$s shm|msg|sem <id>...\n"
msgstr ""
" %1$s [选项]\n"
" %1$s shm|msg|sem <id>...\n"

#: sys-utils/ipcrm.c:55
msgid "Remove certain IPC resources.\n"
msgstr "移除某个 IPC 资源。\n"

#: sys-utils/ipcrm.c:58
msgid " -m, --shmem-id <id>        remove shared memory segment by id\n"
msgstr " -m, --shmem-id <id>        按 id 号移除共享内存段\n"

#: sys-utils/ipcrm.c:59
msgid " -M, --shmem-key <key>      remove shared memory segment by key\n"
msgstr " -M, --shmem-key <键>       按键值移除共享内存段\n"

#: sys-utils/ipcrm.c:60
msgid " -q, --queue-id <id>        remove message queue by id\n"
msgstr " -q, --queue-id <id>        按 id 号移除消息队列\n"

#: sys-utils/ipcrm.c:61
msgid " -Q, --queue-key <key>      remove message queue by key\n"
msgstr " -Q, --queue-key <键>       按键值移除消息队列\n"

#: sys-utils/ipcrm.c:62
msgid " -s, --semaphore-id <id>    remove semaphore by id\n"
msgstr " -s, --semaphore-id <id>    按 id 号移除信号量\n"

#: sys-utils/ipcrm.c:63
msgid " -S, --semaphore-key <key>  remove semaphore by key\n"
msgstr " -S, --semaphore-key <键>  按键值移除信号量\n"

#: sys-utils/ipcrm.c:64
msgid " -a, --all[=shm|msg|sem]    remove all (in the specified category)\n"
msgstr " -a, --all[=<shm|msg|sem>]  (将指定类别中的)全部移除\n"

#: sys-utils/ipcrm.c:65
msgid " -v, --verbose              explain what is being done\n"
msgstr " -v, --verbose              解释正在进行的操作\n"

#: sys-utils/ipcrm.c:86
#, c-format
msgid "removing shared memory segment id `%d'\n"
msgstr "正在移除共享内存段 id “%d”\n"

#: sys-utils/ipcrm.c:91
#, c-format
msgid "removing message queue id `%d'\n"
msgstr "正在移除消息队列 id “%d”\n"

#: sys-utils/ipcrm.c:96
#, c-format
msgid "removing semaphore id `%d'\n"
msgstr "正在移除信号量 id “%d”\n"

#: sys-utils/ipcrm.c:108 sys-utils/ipcrm.c:223
msgid "permission denied for key"
msgstr "对 键 的权限不足"

#: sys-utils/ipcrm.c:108
msgid "permission denied for id"
msgstr "对 id 的权限不足"

#: sys-utils/ipcrm.c:111 sys-utils/ipcrm.c:229
msgid "invalid key"
msgstr "无效键"

#: sys-utils/ipcrm.c:111
msgid "invalid id"
msgstr "无效 id"

#: sys-utils/ipcrm.c:114 sys-utils/ipcrm.c:226
msgid "already removed key"
msgstr "已移除的键"

#: sys-utils/ipcrm.c:114
msgid "already removed id"
msgstr "已移除的 id"

#: sys-utils/ipcrm.c:117 sys-utils/ipcrm.c:232
msgid "key failed"
msgstr "键失败"

#: sys-utils/ipcrm.c:117
msgid "id failed"
msgstr "ID 失败"

#: sys-utils/ipcrm.c:135
#, c-format
msgid "invalid id: %s"
msgstr "无效 ID：%s"

#: sys-utils/ipcrm.c:168
#, c-format
msgid "resource(s) deleted\n"
msgstr "资源已删除\n"

#: sys-utils/ipcrm.c:201
#, c-format
msgid "illegal key (%s)"
msgstr "非法的键(%s)"

#: sys-utils/ipcrm.c:257
msgid "kernel not configured for shared memory"
msgstr "内核未做共享内存的相关配置"

#: sys-utils/ipcrm.c:270
msgid "kernel not configured for semaphores"
msgstr "内核未做信号量的相关配置"

#: sys-utils/ipcrm.c:291
msgid "kernel not configured for message queues"
msgstr "内核未做消息的相关配置"

#: sys-utils/ipcs.c:61
#, c-format
msgid ""
" %1$s [resource-option...] [output-option]\n"
" %1$s -m|-q|-s -i <id>\n"
msgstr ""
" %1$s [资源选项...] [输出选项]\n"
" %1$s -m|-q|-s -i <id>\n"

#: sys-utils/ipcs.c:65 sys-utils/lsipc.c:295
msgid "Show information on IPC facilities.\n"
msgstr "显示 IPC 设施的信息。\n"

#: sys-utils/ipcs.c:68
msgid " -i, --id <id>  print details on resource identified by <id>\n"
msgstr " -i, --id <id>  打印由<id>标识的资源的详细信息\n"

#: sys-utils/ipcs.c:72 sys-utils/lsipc.c:298
msgid "Resource options:\n"
msgstr "资源选项：\n"

#: sys-utils/ipcs.c:73 sys-utils/lsipc.c:299
msgid " -m, --shmems      shared memory segments\n"
msgstr " -m, --shmems      共享内存段\n"

#: sys-utils/ipcs.c:74 sys-utils/lsipc.c:300
msgid " -q, --queues      message queues\n"
msgstr " -q, --queues      消息队列\n"

#: sys-utils/ipcs.c:75 sys-utils/lsipc.c:301
msgid " -s, --semaphores  semaphores\n"
msgstr " -s, --semaphores  信号量\n"

#: sys-utils/ipcs.c:76
msgid " -a, --all         all (default)\n"
msgstr " -a, --all         全部(默认)\n"

#: sys-utils/ipcs.c:79
msgid "Output options:\n"
msgstr "输出选项：\n"

#: sys-utils/ipcs.c:80
msgid " -t, --time        show attach, detach and change times\n"
msgstr " -t, --time        显示附加、脱离和更改时间\n"

#: sys-utils/ipcs.c:81
msgid " -p, --pid         show PIDs of creator and last operator\n"
msgstr " -p, --pid         显示创建者和最后操作者的 PID\n"

#: sys-utils/ipcs.c:82
msgid " -c, --creator     show creator and owner\n"
msgstr " -c, --creator     显示创建者和拥有者\n"

#: sys-utils/ipcs.c:83
msgid " -l, --limits      show resource limits\n"
msgstr " -l, --limits      显示资源限制\n"

#: sys-utils/ipcs.c:84
msgid " -u, --summary     show status summary\n"
msgstr " -u, --summary     显示状态摘要\n"

#: sys-utils/ipcs.c:85
msgid "     --human       show sizes in human-readable format\n"
msgstr "     --human       以易读格式显示大小\n"

#: sys-utils/ipcs.c:86
msgid " -b, --bytes       show sizes in bytes\n"
msgstr " -b, --bytes       以字节数显示大小\n"

#: sys-utils/ipcs.c:124
#, fuzzy
#| msgid "failed to parse argument"
msgid "failed to parse id argument"
msgstr "解析参数失败"

#: sys-utils/ipcs.c:172
msgid "when using an ID, a single resource must be specified"
msgstr "使用 ID 时，必须指定一个资源"

#: sys-utils/ipcs.c:212
#, c-format
msgid "unable to fetch shared memory limits\n"
msgstr "无法获取共享内存限制\n"

#: sys-utils/ipcs.c:215
#, c-format
msgid "------ Shared Memory Limits --------\n"
msgstr "---------- 同享内存限制 ------------\n"

#: sys-utils/ipcs.c:216
#, c-format
msgid "max number of segments = %ju\n"
msgstr "最大段数 = %ju\n"

#: sys-utils/ipcs.c:218
msgid "max seg size"
msgstr "最大段大小"

#: sys-utils/ipcs.c:225
msgid "max total shared memory (kbytes)"
msgstr "最大总共享内存（千字节）"

#: sys-utils/ipcs.c:233
msgid "max total shared memory"
msgstr "最大总共享内存"

#: sys-utils/ipcs.c:236
msgid "min seg size"
msgstr "最小段大小"

#: sys-utils/ipcs.c:248
#, c-format
msgid "kernel not configured for shared memory\n"
msgstr "内核未做共享内存的相关配置\n"

#: sys-utils/ipcs.c:252
#, c-format
msgid "------ Shared Memory Status --------\n"
msgstr "---------- 共享内存状态 ------------\n"

#. TRANSLATORS: This output format is maintained for backward
#. compatibility as ipcs is used in scripts. For consistency
#. with the rest, the translated form can follow this model:
#. *
#. "segments allocated = %d\n"
#. "pages allocated = %ld\n"
#. "pages resident = %ld\n"
#. "pages swapped = %ld\n"
#. "swap performance = %ld attempts, %ld successes\n"
#.
#: sys-utils/ipcs.c:264
#, c-format
msgid ""
"segments allocated %d\n"
"pages allocated %ld\n"
"pages resident  %ld\n"
"pages swapped   %ld\n"
"Swap performance: %ld attempts\t %ld successes\n"
msgstr ""
"段已分配 %d\n"
"页已分配 %ld\n"
"页驻留  %ld\n"
"页交换  %ld\n"
"交换性能：%ld 次尝试\t %ld 次成功\n"

#: sys-utils/ipcs.c:281
#, c-format
msgid "------ Shared Memory Segment Creators/Owners --------\n"
msgstr "------------- 共享内存段创建者/拥有者 ---------------\n"

#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:289 sys-utils/ipcs.c:296
#: sys-utils/ipcs.c:302
msgid "shmid"
msgstr "shmid"

#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:302 sys-utils/ipcs.c:407
#: sys-utils/ipcs.c:422 sys-utils/ipcs.c:509 sys-utils/ipcs.c:527
msgid "perms"
msgstr "权限"

#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
msgid "cuid"
msgstr "cuid"

#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
msgid "cgid"
msgstr "cgid"

#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
msgid "uid"
msgstr "uid"

#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
msgid "gid"
msgstr "gid"

#: sys-utils/ipcs.c:287
#, c-format
msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
msgstr "------------ 共享内存 附加/脱离/更改 时间 --------------\n"

#: sys-utils/ipcs.c:289 sys-utils/ipcs.c:296 sys-utils/ipcs.c:302
#: sys-utils/ipcs.c:413 sys-utils/ipcs.c:422 sys-utils/ipcs.c:515
#: sys-utils/ipcs.c:521 sys-utils/ipcs.c:527
msgid "owner"
msgstr "拥有者"

#: sys-utils/ipcs.c:289
msgid "attached"
msgstr "已附加"

#: sys-utils/ipcs.c:289
msgid "detached"
msgstr "已断开"

#: sys-utils/ipcs.c:290
msgid "changed"
msgstr "已更改"

#: sys-utils/ipcs.c:294
#, c-format
msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
msgstr "-------- 共享内存 创建者/上次修改者 PID ----------\n"

#: sys-utils/ipcs.c:296
msgid "cpid"
msgstr "cpid"

#: sys-utils/ipcs.c:296
msgid "lpid"
msgstr "lpid"

#: sys-utils/ipcs.c:300
#, c-format
msgid "------ Shared Memory Segments --------\n"
msgstr "------------ 共享内存段 --------------\n"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:422 sys-utils/ipcs.c:527
msgid "key"
msgstr "键"

#: sys-utils/ipcs.c:303 sys-utils/prlimit.c:77 sys-utils/prlimit.c:78
#: sys-utils/prlimit.c:80 sys-utils/prlimit.c:81 sys-utils/prlimit.c:83
#: sys-utils/prlimit.c:84 sys-utils/prlimit.c:88 sys-utils/prlimit.c:92
msgid "bytes"
msgstr "字节"

#: sys-utils/ipcs.c:304
msgid "nattch"
msgstr "连接数"

#: sys-utils/ipcs.c:304
msgid "status"
msgstr "状态"

#: sys-utils/ipcs.c:328 sys-utils/ipcs.c:330 sys-utils/ipcs.c:332
#: sys-utils/ipcs.c:445 sys-utils/ipcs.c:447 sys-utils/ipcs.c:552
#: sys-utils/ipcs.c:554 sys-utils/ipcs.c:556 sys-utils/ipcs.c:609
#: sys-utils/ipcs.c:611 sys-utils/ipcs.c:640 sys-utils/ipcs.c:642
#: sys-utils/ipcs.c:644 sys-utils/ipcs.c:668
msgid "Not set"
msgstr "未设置"

#: sys-utils/ipcs.c:358 sys-utils/lsipc.c:1012 sys-utils/lsipc.c:1018
msgid "dest"
msgstr "目标"

#: sys-utils/ipcs.c:359 sys-utils/lsipc.c:1013 sys-utils/lsipc.c:1026
msgid "locked"
msgstr "已锁定"

#: sys-utils/ipcs.c:378
#, c-format
msgid "unable to fetch semaphore limits\n"
msgstr "无法获取信号量限制\n"

#: sys-utils/ipcs.c:381
#, c-format
msgid "------ Semaphore Limits --------\n"
msgstr "--------- 信号量限制 -----------\n"

#: sys-utils/ipcs.c:382
#, c-format
msgid "max number of arrays = %d\n"
msgstr "最大数组数量 = %d\n"

#: sys-utils/ipcs.c:383
#, c-format
msgid "max semaphores per array = %d\n"
msgstr "每个数组的最大信号量数目 = %d\n"

#: sys-utils/ipcs.c:384
#, c-format
msgid "max semaphores system wide = %d\n"
msgstr "系统最大信号量数 = %d\n"

#: sys-utils/ipcs.c:385
#, c-format
msgid "max ops per semop call = %d\n"
msgstr "每次信号量调用最大操作数 = %d\n"

#: sys-utils/ipcs.c:386
#, c-format
msgid "semaphore max value = %u\n"
msgstr "信号量最大值=%u\n"

#: sys-utils/ipcs.c:395
#, c-format
msgid "kernel not configured for semaphores\n"
msgstr "内核未做信号量的相关配置\n"

#: sys-utils/ipcs.c:398
#, c-format
msgid "------ Semaphore Status --------\n"
msgstr "--------- 信号量状态 -----------\n"

#: sys-utils/ipcs.c:399
#, c-format
msgid "used arrays = %d\n"
msgstr "已使用数组 = %d\n"

#: sys-utils/ipcs.c:400
#, c-format
msgid "allocated semaphores = %d\n"
msgstr "已分配信号量数 = %d\n"

#: sys-utils/ipcs.c:405
#, c-format
msgid "------ Semaphore Arrays Creators/Owners --------\n"
msgstr "----------- 信号量数组创建者/拥有者 ------------\n"

#: sys-utils/ipcs.c:407 sys-utils/ipcs.c:413 sys-utils/ipcs.c:422
msgid "semid"
msgstr "semid"

#: sys-utils/ipcs.c:411
#, c-format
msgid "------ Semaphore Operation/Change Times --------\n"
msgstr "------------ 信号量 操作/更改 时间 -------------\n"

#: sys-utils/ipcs.c:413
msgid "last-op"
msgstr "上一操作"

#: sys-utils/ipcs.c:413
msgid "last-changed"
msgstr "上次更改"

#: sys-utils/ipcs.c:420
#, c-format
msgid "------ Semaphore Arrays --------\n"
msgstr "--------- 信号量数组 -----------\n"

#: sys-utils/ipcs.c:422
msgid "nsems"
msgstr "nsems"

#: sys-utils/ipcs.c:479
#, c-format
msgid "unable to fetch message limits\n"
msgstr "无法获取消息限制\n"

#: sys-utils/ipcs.c:482
#, c-format
msgid "------ Messages Limits --------\n"
msgstr "---------- 消息限制 -----------\n"

#: sys-utils/ipcs.c:483
#, c-format
msgid "max queues system wide = %d\n"
msgstr "系统最大队列数量 = %d\n"

#: sys-utils/ipcs.c:485
msgid "max size of message"
msgstr "最大消息尺寸"

#: sys-utils/ipcs.c:487
msgid "default max size of queue"
msgstr "默认的队列最大尺寸"

#: sys-utils/ipcs.c:494
#, c-format
msgid "kernel not configured for message queues\n"
msgstr "内核未做消息的相关配置\n"

#: sys-utils/ipcs.c:497
#, c-format
msgid "------ Messages Status --------\n"
msgstr "---------- 消息状态 -----------\n"

#: sys-utils/ipcs.c:499
#, c-format
msgid "allocated queues = %d\n"
msgstr "已分配队列数 = %d\n"

#: sys-utils/ipcs.c:500
#, c-format
msgid "used headers = %d\n"
msgstr "已用消息头(header)数 = %d\n"

#: sys-utils/ipcs.c:502
msgid "used space"
msgstr "已用空间"

#: sys-utils/ipcs.c:503
msgid " bytes\n"
msgstr " 字节\n"

#: sys-utils/ipcs.c:507
#, c-format
msgid "------ Message Queues Creators/Owners --------\n"
msgstr "---------- 消息队列 创建者/拥有者 ------------\n"

#: sys-utils/ipcs.c:509 sys-utils/ipcs.c:515 sys-utils/ipcs.c:521
#: sys-utils/ipcs.c:527
msgid "msqid"
msgstr "msqid"

#: sys-utils/ipcs.c:513
#, c-format
msgid "------ Message Queues Send/Recv/Change Times --------\n"
msgstr "----------- 消息队列 发送/接收/更改 时间 ------------\n"

#: sys-utils/ipcs.c:515
msgid "send"
msgstr "发送"

#: sys-utils/ipcs.c:515
msgid "recv"
msgstr "接收"

#: sys-utils/ipcs.c:515
msgid "change"
msgstr "更改"

#: sys-utils/ipcs.c:519
#, c-format
msgid "------ Message Queues PIDs --------\n"
msgstr "--------- 消息队列 PID -----------\n"

#: sys-utils/ipcs.c:521
msgid "lspid"
msgstr "lspid"

#: sys-utils/ipcs.c:521
msgid "lrpid"
msgstr "lrpid"

#: sys-utils/ipcs.c:525
#, c-format
msgid "------ Message Queues --------\n"
msgstr "--------- 消息队列 -----------\n"

#: sys-utils/ipcs.c:528
msgid "used-bytes"
msgstr "已用字节数"

#: sys-utils/ipcs.c:529
msgid "messages"
msgstr "消息"

#: sys-utils/ipcs.c:593 sys-utils/ipcs.c:623 sys-utils/ipcs.c:656
#: sys-utils/lsipc.c:559 sys-utils/lsipc.c:751 sys-utils/lsipc.c:914
#, c-format
msgid "id %d not found"
msgstr "找不到 id %d"

#: sys-utils/ipcs.c:597
#, c-format
msgid ""
"\n"
"Shared memory Segment shmid=%d\n"
msgstr ""
"\n"
"共享内存段 shmid=%d\n"

#: sys-utils/ipcs.c:598
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"

#: sys-utils/ipcs.c:601
#, c-format
msgid "mode=%#o\taccess_perms=%#o\n"
msgstr "模式=%#o\t访问权限=%#o\n"

#: sys-utils/ipcs.c:603
msgid "size="
msgstr "大小="

#: sys-utils/ipcs.c:603
msgid "bytes="
msgstr "字节数="

#: sys-utils/ipcs.c:605
#, c-format
msgid "lpid=%u\tcpid=%u\tnattch=%jd\n"
msgstr "lpid=%u\tcpid=%u\tnattch=%jd\n"

#: sys-utils/ipcs.c:608
#, c-format
msgid "att_time=%-26.24s\n"
msgstr "附加时间=%-26.24s\n"

#: sys-utils/ipcs.c:610
#, c-format
msgid "det_time=%-26.24s\n"
msgstr "脱离时间=%-26.24s\n"

#: sys-utils/ipcs.c:612 sys-utils/ipcs.c:643
#, c-format
msgid "change_time=%-26.24s\n"
msgstr "更改时间=%-26.24s\n"

#: sys-utils/ipcs.c:627
#, c-format
msgid ""
"\n"
"Message Queue msqid=%d\n"
msgstr ""
"\n"
"消息队列 msqid=%d\n"

#: sys-utils/ipcs.c:628
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\t模式=%#o\n"

#: sys-utils/ipcs.c:632
msgid "csize="
msgstr "csize="

#: sys-utils/ipcs.c:632
msgid "cbytes="
msgstr "cbytes="

#: sys-utils/ipcs.c:634
msgid "qsize="
msgstr "qsize="

#: sys-utils/ipcs.c:634
msgid "qbytes="
msgstr "qbytes="

#: sys-utils/ipcs.c:639
#, c-format
msgid "send_time=%-26.24s\n"
msgstr "发送时间=%-26.24s\n"

#: sys-utils/ipcs.c:641
#, c-format
msgid "rcv_time=%-26.24s\n"
msgstr "接收时间=%-26.24s\n"

#: sys-utils/ipcs.c:660
#, c-format
msgid ""
"\n"
"Semaphore Array semid=%d\n"
msgstr ""
"\n"
"信号量数组 semid=%d\n"

#: sys-utils/ipcs.c:661
#, c-format
msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
msgstr "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"

#: sys-utils/ipcs.c:664
#, c-format
msgid "mode=%#o, access_perms=%#o\n"
msgstr "模式=%#o，访问权限=%#o\n"

#: sys-utils/ipcs.c:666
#, c-format
msgid "nsems = %ju\n"
msgstr "nsems = %ju\n"

#: sys-utils/ipcs.c:667
#, c-format
msgid "otime = %-26.24s\n"
msgstr "otime = %-26.24s\n"

#: sys-utils/ipcs.c:669
#, c-format
msgid "ctime = %-26.24s\n"
msgstr "ctime = %-26.24s\n"

#: sys-utils/ipcs.c:672
msgid "semnum"
msgstr "semnum"

#: sys-utils/ipcs.c:672
msgid "value"
msgstr "值"

#: sys-utils/ipcs.c:672
msgid "ncount"
msgstr "ncount"

#: sys-utils/ipcs.c:672
msgid "zcount"
msgstr "zcount"

#: sys-utils/ipcs.c:672
msgid "pid"
msgstr "pid"

#: sys-utils/ipcutils.c:234 sys-utils/ipcutils.c:238 sys-utils/ipcutils.c:242
#: sys-utils/ipcutils.c:246
#, c-format
msgid "%s failed"
msgstr "%s 失败"

#: sys-utils/ipcutils.c:507
#, c-format
msgid "%s (bytes) = "
msgstr "%s (字节) = "

#: sys-utils/ipcutils.c:509
#, c-format
msgid "%s (kbytes) = "
msgstr "%s (千字节) = "

#: sys-utils/irq-common.c:54
msgid "interrupts"
msgstr "中断"

#: sys-utils/irq-common.c:55
#, fuzzy
#| msgid "read count"
msgid "total count"
msgstr "读计数"

#: sys-utils/irq-common.c:56
#, fuzzy
#| msgid "read count"
msgid "delta count"
msgstr "读计数"

#: sys-utils/irq-common.c:57
msgid "name"
msgstr "名称"

#: sys-utils/irq-common.c:139 sys-utils/irq-common.c:460 sys-utils/lsmem.c:702
#: sys-utils/lsns.c:1116
msgid "failed to initialize output table"
msgstr "初始化输出表失败"

#: sys-utils/irq-common.c:173 sys-utils/lsns.c:1037
msgid "failed to add line to output"
msgstr "向输出添加行出错"

#: sys-utils/irq-common.c:416
#, fuzzy
#| msgid "unsupported color mode"
msgid "unsupported column name to sort output"
msgstr "不支持的颜色模式"

#: sys-utils/irq-common.c:468
#, fuzzy
#| msgid "interrupts"
msgid "cpu-interrupts"
msgstr "中断"

#: sys-utils/irq-common.c:504
#, no-c-format
msgid "%delta:"
msgstr ""

#: sys-utils/irqtop.c:139
#, c-format
msgid ""
"irqtop | total: %ld delta: %ld | %s | %s\n"
"\n"
msgstr ""

#: sys-utils/irqtop.c:187
msgid "cannot not create timerfd"
msgstr "无法创建 timerfd"

#: sys-utils/irqtop.c:189
msgid "cannot set timerfd"
msgstr "无法设置 timerfd"

#: sys-utils/irqtop.c:194 sys-utils/irqtop.c:212 sys-utils/irqtop.c:217
msgid "epoll_ctl failed"
msgstr "epoll_ctl 失败"

#: sys-utils/irqtop.c:197
msgid "sigfillset failed"
msgstr "sigfillset 失败"

#: sys-utils/irqtop.c:199
msgid "sigprocmask failed"
msgstr "sigprocmask 失败"

#: sys-utils/irqtop.c:207
msgid "cannot not create signalfd"
msgstr "无法创建 signalfd"

#: sys-utils/irqtop.c:265
msgid "Interactive utility to display kernel interrupt information."
msgstr ""

#: sys-utils/irqtop.c:268
msgid " -c, --cpu-stat <mode> show per-cpu stat (auto, enable, disable)\n"
msgstr ""

#: sys-utils/irqtop.c:269
msgid " -C, --cpu-list <list> specify cpus in list format\n"
msgstr ""

#: sys-utils/irqtop.c:270
msgid " -d, --delay <secs>   delay updates\n"
msgstr ""

#: sys-utils/irqtop.c:272 sys-utils/lsirq.c:67
#, fuzzy
#| msgid " -x, --sort <column>  sort output by <column>\n"
msgid " -s, --sort <column>  specify sort column\n"
msgstr " -x, --sort <列>      按<列>对输出排序\n"

#: sys-utils/irqtop.c:273 sys-utils/lsirq.c:68
#, fuzzy
#| msgid " -y, --physical          print physical instead of logical IDs\n"
msgid " -S, --softirq        show softirqs instead of interrupts\n"
msgstr " -y, --physical          打印物理 ID 而非逻辑 ID\n"

#: sys-utils/irqtop.c:277
msgid ""
"\n"
"The following interactive key commands are valid:\n"
msgstr ""

#: sys-utils/irqtop.c:278
msgid "  i      sort by IRQ\n"
msgstr ""

#: sys-utils/irqtop.c:279
msgid "  t      sort by TOTAL\n"
msgstr ""

#: sys-utils/irqtop.c:280
msgid "  d      sort by DELTA\n"
msgstr ""

#: sys-utils/irqtop.c:281
msgid "  n      sort by NAME\n"
msgstr ""

#: sys-utils/irqtop.c:282
msgid "  q Q    quit program\n"
msgstr ""

#: sys-utils/irqtop.c:320
#, fuzzy, c-format
#| msgid "unsupported mode name: '%s'"
msgid "unsupported mode '%s'"
msgstr "不支持的模式名称：“%s”"

#: sys-utils/irqtop.c:342
#, fuzzy
#| msgid "failed to parse argument"
msgid "failed to parse delay argument"
msgstr "解析参数失败"

#: sys-utils/irqtop.c:399
msgid "terminal setting retrieval"
msgstr ""

#: sys-utils/ldattach.c:184
msgid "invalid iflag"
msgstr "无效的 iflag"

#: sys-utils/ldattach.c:200
#, c-format
msgid " %s [options] <ldisc> <device>\n"
msgstr " %s [选项] <线路规则> <设备>\n"

#: sys-utils/ldattach.c:203
msgid "Attach a line discipline to a serial line.\n"
msgstr "向串口线附加一条线路规则。\n"

#: sys-utils/ldattach.c:206
msgid " -d, --debug             print verbose messages to stderr\n"
msgstr " -d, --debug             向标准错误打印详尽消息\n"

#: sys-utils/ldattach.c:207
msgid " -s, --speed <value>     set serial line speed\n"
msgstr " -s, --speed <值>        设置串口线速度\n"

#: sys-utils/ldattach.c:208
msgid " -c, --intro-command <string> intro sent before ldattach\n"
msgstr " -c, --intro-command <字符串> 先发送 intro 后发送 ldattach\n"

#: sys-utils/ldattach.c:209
msgid " -p, --pause <seconds>   pause between intro and ldattach\n"
msgstr " -p, --pause <秒数>   在 intro 和 ldattach 之间暂停\n"

#: sys-utils/ldattach.c:210
msgid " -7, --sevenbits         set character size to 7 bits\n"
msgstr " -7, --sevenbits         字节大小设为 7 位\n"

#: sys-utils/ldattach.c:211
msgid " -8, --eightbits         set character size to 8 bits\n"
msgstr " -8, --eightbits         字节大小设为 8 位\n"

#: sys-utils/ldattach.c:212
msgid " -n, --noparity          set parity to none\n"
msgstr " -n, --noparity          设为无校验位\n"

#: sys-utils/ldattach.c:213
msgid " -e, --evenparity        set parity to even\n"
msgstr " -e, --evenparity        设为奇检验\n"

#: sys-utils/ldattach.c:214
msgid " -o, --oddparity         set parity to odd\n"
msgstr " -o, --oddparity         设为偶检验\n"

#: sys-utils/ldattach.c:215
msgid " -1, --onestopbit        set stop bits to one\n"
msgstr " -1, --onestopbit        停止位设为 1\n"

#: sys-utils/ldattach.c:216
msgid " -2, --twostopbits       set stop bits to two\n"
msgstr " -2, --twostopbits       停止位设为 2\n"

#: sys-utils/ldattach.c:217
msgid " -i, --iflag [-]<iflag>  set input mode flag\n"
msgstr " -i, --iflag [-]<iflag>  设置输入模式标志\n"

#: sys-utils/ldattach.c:222
msgid ""
"\n"
"Known <ldisc> names:\n"
msgstr ""
"\n"
"已知<线路规则>名称：\n"

#: sys-utils/ldattach.c:226
msgid ""
"\n"
"Known <iflag> names:\n"
msgstr ""
"\n"
"已知<iflag>名称：\n"

#: sys-utils/ldattach.c:344
msgid "invalid speed argument"
msgstr "无效的 速度 参数"

#: sys-utils/ldattach.c:347
msgid "invalid pause argument"
msgstr "无效的暂停参数"

#: sys-utils/ldattach.c:374
msgid "invalid line discipline argument"
msgstr "无效的 线路规则 参数"

#: sys-utils/ldattach.c:394
#, c-format
msgid "%s is not a serial line"
msgstr "%s 不是串行线"

#: sys-utils/ldattach.c:401
#, c-format
msgid "cannot get terminal attributes for %s"
msgstr "无法获取 %s 的终端属性"

#: sys-utils/ldattach.c:404
#, c-format
msgid "speed %d unsupported"
msgstr "不支持速度 %d"

#: sys-utils/ldattach.c:453
#, c-format
msgid "cannot set terminal attributes for %s"
msgstr "无法设置 %s 的终端属性"

#: sys-utils/ldattach.c:463
#, c-format
msgid "cannot write intro command to %s"
msgstr "无法向 %s 写入 intro 命令"

#: sys-utils/ldattach.c:473
msgid "cannot set line discipline"
msgstr "无法设置行规则"

#: sys-utils/ldattach.c:483
msgid "cannot daemonize"
msgstr "无法转为守护进程"

#: sys-utils/losetup.c:72
msgid "autoclear flag set"
msgstr "已设置 自动清除 标志"

#: sys-utils/losetup.c:73
msgid "device backing file"
msgstr "设备后备文件"

#: sys-utils/losetup.c:74
msgid "backing file inode number"
msgstr "后备文件 inode 号"

#: sys-utils/losetup.c:75
msgid "backing file major:minor device number"
msgstr "后备文件 主:次 设备号"

#: sys-utils/losetup.c:76
msgid "loop device name"
msgstr "回环设备名"

#: sys-utils/losetup.c:77
msgid "offset from the beginning"
msgstr "起始位置偏移"

#: sys-utils/losetup.c:78
msgid "partscan flag set"
msgstr "已设置 partscan 标志"

#: sys-utils/losetup.c:80
msgid "size limit of the file in bytes"
msgstr "文件的大小限制(字节数)"

#: sys-utils/losetup.c:81
msgid "loop device major:minor number"
msgstr "回环设备 主:次 设备号"

#: sys-utils/losetup.c:82
msgid "access backing file with direct-io"
msgstr "通过直接 IO 访问后备文件"

#: sys-utils/losetup.c:83
#, fuzzy
#| msgid "logical sector size"
msgid "logical sector size in bytes"
msgstr "逻辑扇区大小"

#: sys-utils/losetup.c:140 sys-utils/losetup.c:151
#, c-format
msgid ", offset %ju"
msgstr "，偏移 %ju"

#: sys-utils/losetup.c:143 sys-utils/losetup.c:154
#, c-format
msgid ", sizelimit %ju"
msgstr "，大小限制 %ju"

#: sys-utils/losetup.c:162
#, c-format
msgid ", encryption %s (type %u)"
msgstr "，加密 %s(类型 %u)"

#: sys-utils/losetup.c:206
#, c-format
msgid "%s: detach failed"
msgstr "%s：断开失败"

#: sys-utils/losetup.c:401
#, c-format
msgid ""
" %1$s [options] [<loopdev>]\n"
" %1$s [options] -f | <loopdev> <file>\n"
msgstr ""
" %1$s [选项] [<回环设备>]\n"
" %1$s [选项] -f | <回环设备> <文件>\n"

#: sys-utils/losetup.c:406
msgid "Set up and control loop devices.\n"
msgstr "设置和控制回环设备。\n"

#: sys-utils/losetup.c:410
msgid " -a, --all                     list all used devices\n"
msgstr " -a, --all                     列出所有使用的设备\n"

#: sys-utils/losetup.c:411
msgid " -d, --detach <loopdev>...     detach one or more devices\n"
msgstr " -d, --detach <回环设备>...    断开一台或多台设备\n"

#: sys-utils/losetup.c:412
msgid " -D, --detach-all              detach all used devices\n"
msgstr " -D, --detach-all              断开所有使用的设备\n"

#: sys-utils/losetup.c:413
msgid " -f, --find                    find first unused device\n"
msgstr " -f, --find                    查找第一个未使用的设备\n"

#: sys-utils/losetup.c:414
msgid " -c, --set-capacity <loopdev>  resize the device\n"
msgstr " -c, --set-capacity <回环设备> 改变设备容量\n"

#: sys-utils/losetup.c:415
msgid " -j, --associated <file>       list all devices associated with <file>\n"
msgstr " -j, --associated <文件>       列出所有与 <文件> 相关的设备\n"

#: sys-utils/losetup.c:416
msgid " -L, --nooverlap               avoid possible conflict between devices\n"
msgstr " -L, --nooverlap               避免设备间的潜在冲突\n"

#: sys-utils/losetup.c:420
msgid " -o, --offset <num>            start at offset <num> into file\n"
msgstr " -o, --offset <数字>           在文件偏移量 <数字> 处开始\n"

#: sys-utils/losetup.c:421
msgid "     --sizelimit <num>         device is limited to <num> bytes of the file\n"
msgstr "     --sizelimit <数字>        设备限制为了文件的<数字>个字节\n"

#: sys-utils/losetup.c:422
#, fuzzy
#| msgid " -b, --sector-size <size>      physical and logical sector size\n"
msgid " -b, --sector-size <num>       set the logical sector size to <num>\n"
msgstr " -b, --sectors-size <大小>     显示扇区计数和大小\n"

#: sys-utils/losetup.c:423
msgid " -P, --partscan                create a partitioned loop device\n"
msgstr " -P, --partscan                创建带分区的回环设备\n"

#: sys-utils/losetup.c:424
msgid " -r, --read-only               set up a read-only loop device\n"
msgstr " -r, --read-only               创建只读的回环设备\n"

#: sys-utils/losetup.c:425
msgid "     --direct-io[=<on|off>]    open backing file with O_DIRECT\n"
msgstr "     --direct-io[=<on|off>]    通过 O_DIRECT 打开后备文件\n"

#: sys-utils/losetup.c:426
msgid "     --show                    print device name after setup (with -f)\n"
msgstr "     --show                    设置后打印设备名(加 -f 选项)\n"

#: sys-utils/losetup.c:427
msgid " -v, --verbose                 verbose mode\n"
msgstr " -v, --verbose                 详尽模式\n"

#: sys-utils/losetup.c:431
msgid " -J, --json                    use JSON --list output format\n"
msgstr " -J, --json                    使用 JSON --list 输出格式\n"

#: sys-utils/losetup.c:432
msgid " -l, --list                    list info about all or specified (default)\n"
msgstr " -l, --list                    列出所有或指定的信息(默认)\n"

#: sys-utils/losetup.c:433
msgid " -n, --noheadings              don't print headings for --list output\n"
msgstr " -n, --noheadings              --list 输出时不打印标题\n"

#: sys-utils/losetup.c:434
msgid " -O, --output <cols>           specify columns to output for --list\n"
msgstr " -O, --output <列>           指定 --list 选项要输出的列\n"

#: sys-utils/losetup.c:435
#, fuzzy
#| msgid " -O, --output-all     output all columns\n"
msgid "     --output-all              output all columns\n"
msgstr " -O, --output-all     输出所有列\n"

#: sys-utils/losetup.c:436
msgid "     --raw                     use raw --list output format\n"
msgstr "     --raw                     使用原生 --list 输出格式\n"

#: sys-utils/losetup.c:464
#, c-format
msgid "%s: Warning: file is smaller than 512 bytes; the loop device may be useless or invisible for system tools."
msgstr "%s：警告，文件小于 512 个字节，回环设备可能无用或在系统工具中看不到。"

#: sys-utils/losetup.c:468
#, c-format
msgid "%s: Warning: file does not fit into a 512-byte sector; the end of the file will be ignored."
msgstr "%s：警告，文件未对齐 512 字节扇区，其末尾将被忽略。"

#: sys-utils/losetup.c:490 sys-utils/losetup.c:542
#, c-format
msgid "%s: overlapping loop device exists"
msgstr "%s: 重叠的回环设备已存在"

#: sys-utils/losetup.c:501
#, c-format
msgid "%s: overlapping read-only loop device exists"
msgstr "%s: 存在重叠的只读回环设备"

#: sys-utils/losetup.c:508
#, c-format
msgid "%s: overlapping encrypted loop device exists"
msgstr "%s：存在重叠的加密回环设备"

#: sys-utils/losetup.c:514
#, c-format
msgid "%s: failed to re-use loop device"
msgstr "%s︰ 未能重新使用回环设备"

#: sys-utils/losetup.c:520
msgid "failed to inspect loop devices"
msgstr "审查回环设备失败"

#: sys-utils/losetup.c:543
#, c-format
msgid "%s: failed to check for conflicting loop devices"
msgstr "%s︰ 检查冲突的循环设备失败"

#: sys-utils/losetup.c:555 sys-utils/losetup.c:881
msgid "cannot find an unused loop device"
msgstr "找不到未使用的回环设备"

#: sys-utils/losetup.c:568
#, c-format
msgid "%s: failed to use backing file"
msgstr "%s：使用后备文件失败"

#: sys-utils/losetup.c:665
msgid "failed to parse logical block size"
msgstr "解析逻辑块大小失败"

#: sys-utils/losetup.c:671 sys-utils/losetup.c:681 sys-utils/losetup.c:809
#: sys-utils/losetup.c:823 sys-utils/losetup.c:861
#, c-format
msgid "%s: failed to use device"
msgstr "%s：使用设备失败"

#: sys-utils/losetup.c:820
msgid "no loop device specified"
msgstr "未指定回环设备"

#: sys-utils/losetup.c:835
#, c-format
msgid "the options %s are allowed during loop device setup only"
msgstr "选项 %s 只允许在设置回环设备时使用"

#: sys-utils/losetup.c:840
msgid "the option --offset is not allowed in this context"
msgstr "此环境下不允许使用 --offset 选项"

#: sys-utils/losetup.c:902
#, c-format
msgid "%s: set capacity failed"
msgstr "%s：设置容量失败"

#: sys-utils/losetup.c:908
#, c-format
msgid "%s: set direct io failed"
msgstr "%s︰ 设置直接 io 失败"

#: sys-utils/losetup.c:914
#, c-format
msgid "%s: set logical block size failed"
msgstr "%s：设置逻辑块大小失败"

#: sys-utils/lscpu.c:48
msgid "none"
msgstr "无"

#: sys-utils/lscpu.c:49
msgid "para"
msgstr "半"

#: sys-utils/lscpu.c:50
msgid "full"
msgstr "完全"

#: sys-utils/lscpu.c:51
msgid "container"
msgstr "容器"

#: sys-utils/lscpu.c:75
msgid "horizontal"
msgstr "水平"

#: sys-utils/lscpu.c:76
msgid "vertical"
msgstr "竖直"

#: sys-utils/lscpu.c:144
msgid "crude measurement of CPU speed"
msgstr ""

#: sys-utils/lscpu.c:145
msgid "logical CPU number"
msgstr "逻辑 CPU 数量"

#: sys-utils/lscpu.c:146
msgid "logical core number"
msgstr "逻辑核心数量"

#: sys-utils/lscpu.c:147
#, fuzzy
#| msgid "logical core number"
msgid "logical cluster number"
msgstr "逻辑核心数量"

#: sys-utils/lscpu.c:148
msgid "logical socket number"
msgstr "逻辑(CPU)座数量"

#: sys-utils/lscpu.c:149
msgid "logical NUMA node number"
msgstr "逻辑 NUMA 节点数量"

#: sys-utils/lscpu.c:150
msgid "logical book number"
msgstr "逻辑 book 数"

#: sys-utils/lscpu.c:151
msgid "logical drawer number"
msgstr "逻辑抽屉号"

#: sys-utils/lscpu.c:152
msgid "shows how caches are shared between CPUs"
msgstr "显示 CPU 间是如何共享缓存的"

#: sys-utils/lscpu.c:153
msgid "CPU dispatching mode on virtual hardware"
msgstr "虚拟硬件上的 CPU 调度模式"

#: sys-utils/lscpu.c:154
msgid "physical address of a CPU"
msgstr "CPU 的物理地址"

#: sys-utils/lscpu.c:155
msgid "shows if the hypervisor has allocated the CPU"
msgstr "显示超级监督(hypervisor)是否分配了 CPU"

#: sys-utils/lscpu.c:156
msgid "shows if Linux currently makes use of the CPU"
msgstr "显示 Linux 当前是否在使用该 CPU"

#: sys-utils/lscpu.c:157
#, fuzzy
#| msgid "shows the maximum MHz of the CPU"
msgid "shows the currently MHz of the CPU"
msgstr "显示 CPU 的最大 MHz"

#: sys-utils/lscpu.c:158
msgid "shows scaling percentage of the CPU frequency"
msgstr ""

#: sys-utils/lscpu.c:159
msgid "shows the maximum MHz of the CPU"
msgstr "显示 CPU 的最大 MHz"

#: sys-utils/lscpu.c:160
msgid "shows the minimum MHz of the CPU"
msgstr "显示 CPU 的最小 MHz"

#: sys-utils/lscpu.c:161
msgid "shows CPU model name"
msgstr ""

#: sys-utils/lscpu.c:166
#, fuzzy
#| msgid "set filesystem readahead"
msgid "size of all system caches"
msgstr "设置 文件系统 readahead"

#: sys-utils/lscpu.c:167
msgid "cache level"
msgstr "缓存等级"

#: sys-utils/lscpu.c:168
msgid "cache name"
msgstr "缓存名称"

#: sys-utils/lscpu.c:169
#, fuzzy
#| msgid "size of the device"
msgid "size of one cache"
msgstr "磁盘容量"

#: sys-utils/lscpu.c:170
msgid "cache type"
msgstr "缓存类型"

#: sys-utils/lscpu.c:171
msgid "ways of associativity"
msgstr ""

#: sys-utils/lscpu.c:172
msgid "allocation policy"
msgstr ""

#: sys-utils/lscpu.c:173
msgid "write policy"
msgstr "写策略"

#: sys-utils/lscpu.c:174
#, fuzzy
#| msgid "Number of physical cylinders"
msgid "number of physical cache line per cache tag"
msgstr "物理柱面数"

#: sys-utils/lscpu.c:175
msgid "number of sets in the cache; set lines has the same cache index"
msgstr ""

#: sys-utils/lscpu.c:176
msgid "minimum amount of data in bytes transferred from memory to cache"
msgstr ""

#: sys-utils/lscpu.c:229
#, fuzzy
#| msgid "failed to initialize procfs handler"
msgid "failed to initialize rootfs handler"
msgstr "%s：初始化 procfs 处理函数失败"

#: sys-utils/lscpu.c:236
msgid "failed to initialize CPUs sysfs handler"
msgstr "%s：初始化 CPU sysfs 处理函数失败"

#: sys-utils/lscpu.c:243
msgid "failed to initialize procfs handler"
msgstr "%s：初始化 procfs 处理函数失败"

#: sys-utils/lscpu.c:336
msgid "Y"
msgstr "Y"

#: sys-utils/lscpu.c:336
msgid "N"
msgstr "N"

#: sys-utils/lscpu.c:677
#, fuzzy, c-format
#| msgid ""
#| "# The following is the parsable format, which can be fed to other\n"
#| "# programs. Each different item in every column has an unique ID\n"
#| "# starting from zero.\n"
msgid ""
"# The following is the parsable format, which can be fed to other\n"
"# programs. Each different item in every column has an unique ID\n"
"# starting usually from zero.\n"
msgstr ""
"# 以下是可解析格式，可以输给其他程序。每列中的各个不同项有一个惟一\n"
"# 的从 0 开始的 ID。\n"

#: sys-utils/lscpu.c:880
msgid "Model name:"
msgstr "型号名称："

#: sys-utils/lscpu.c:882
msgid "BIOS Model name:"
msgstr "BIOS 型号名称："

#: sys-utils/lscpu.c:884
#, fuzzy
#| msgid "CPU family:"
msgid "BIOS CPU family:"
msgstr "CPU 系列："

#: sys-utils/lscpu.c:886
msgid "Machine type:"
msgstr "机器类型︰"

#: sys-utils/lscpu.c:888
msgid "CPU family:"
msgstr "CPU 系列："

#: sys-utils/lscpu.c:890
msgid "Model:"
msgstr "型号："

#: sys-utils/lscpu.c:892
msgid "Thread(s) per core:"
msgstr "每个核的线程数："

#: sys-utils/lscpu.c:894
#, fuzzy
#| msgid "Core(s) per socket:"
msgid "Core(s) per cluster:"
msgstr "每个座的核数："

#: sys-utils/lscpu.c:896
msgid "Core(s) per socket:"
msgstr "每个座的核数："

#: sys-utils/lscpu.c:899
msgid "Socket(s) per book:"
msgstr "每个 book 的座数："

#: sys-utils/lscpu.c:901
msgid "Book(s) per drawer:"
msgstr "每个抽屉里的 Book 数︰"

#: sys-utils/lscpu.c:902
msgid "Drawer(s):"
msgstr "抽屉："

#: sys-utils/lscpu.c:904
msgid "Book(s):"
msgstr "Book："

#: sys-utils/lscpu.c:908 sys-utils/lscpu.c:910 sys-utils/lscpu.c:915
msgid "Socket(s):"
msgstr "座："

#: sys-utils/lscpu.c:912
msgid "Cluster(s):"
msgstr ""

#: sys-utils/lscpu.c:920
msgid "Stepping:"
msgstr "步进："

#: sys-utils/lscpu.c:922
#, fuzzy
#| msgid "FreeBSD boot"
msgid "Frequency boost:"
msgstr "FreeBSD 启动"

#: sys-utils/lscpu.c:923
#, fuzzy
#| msgid "Unusable"
msgid "enabled"
msgstr "不可用"

#: sys-utils/lscpu.c:923
#, fuzzy
#| msgid "CPU %u disabled\n"
msgid "disabled"
msgstr "CPU %u 已禁用\n"

#: sys-utils/lscpu.c:927
msgid "CPU dynamic MHz:"
msgstr "CPU 动态 MHz:"

#: sys-utils/lscpu.c:929
msgid "CPU static MHz:"
msgstr "CPU 静态 MHz:"

#: sys-utils/lscpu.c:934
#, fuzzy
#| msgid "CPU min MHz:"
msgid "CPU(s) scaling MHz:"
msgstr "CPU 最小 MHz："

#: sys-utils/lscpu.c:935
msgid "CPU max MHz:"
msgstr "CPU 最大 MHz："

#: sys-utils/lscpu.c:936
msgid "CPU min MHz:"
msgstr "CPU 最小 MHz："

#: sys-utils/lscpu.c:939
msgid "BogoMIPS:"
msgstr "BogoMIPS："

#: sys-utils/lscpu.c:942
msgid "Dispatching mode:"
msgstr "分派模式："

#: sys-utils/lscpu.c:945
msgid "Physical sockets:"
msgstr "物理套接字︰"

#: sys-utils/lscpu.c:946
msgid "Physical chips:"
msgstr "物理芯片︰"

#: sys-utils/lscpu.c:947
msgid "Physical cores/chip:"
msgstr "物理核心/芯片︰"

#: sys-utils/lscpu.c:951
msgid "Flags:"
msgstr "标记："

#: sys-utils/lscpu.c:995
msgid "Architecture:"
msgstr "架构："

#: sys-utils/lscpu.c:1008
msgid "CPU op-mode(s):"
msgstr "CPU 运行模式："

#: sys-utils/lscpu.c:1011
msgid "Address sizes:"
msgstr ""

#: sys-utils/lscpu.c:1014 sys-utils/lscpu.c:1016
msgid "Byte Order:"
msgstr "字节序："

#: sys-utils/lscpu.c:1019
msgid "CPU(s):"
msgstr "CPU:"

#: sys-utils/lscpu.c:1023
msgid "On-line CPU(s) mask:"
msgstr "在线 CPU 掩码："

#: sys-utils/lscpu.c:1024
msgid "On-line CPU(s) list:"
msgstr "在线 CPU 列表："

#: sys-utils/lscpu.c:1036
msgid "failed to callocate cpu set"
msgstr "分配(callocate) CPU 组 失败"

#: sys-utils/lscpu.c:1045
msgid "Off-line CPU(s) mask:"
msgstr "离线 CPU 掩码："

#: sys-utils/lscpu.c:1046
msgid "Off-line CPU(s) list:"
msgstr "离线 CPU 列表："

#: sys-utils/lscpu.c:1053
msgid "Vendor ID:"
msgstr "厂商 ID："

#: sys-utils/lscpu.c:1055
msgid "BIOS Vendor ID:"
msgstr "BIOS 厂商 ID："

#: sys-utils/lscpu.c:1063
#, fuzzy
#| msgid "Virtualization type:"
msgid "Virtualization features:"
msgstr "虚拟化类型："

#: sys-utils/lscpu.c:1065 sys-utils/lscpu.c:1067
msgid "Virtualization:"
msgstr "虚拟化："

#: sys-utils/lscpu.c:1070
msgid "Hypervisor:"
msgstr "超管理器："

#: sys-utils/lscpu.c:1072
msgid "Hypervisor vendor:"
msgstr "超管理器厂商："

#: sys-utils/lscpu.c:1073
msgid "Virtualization type:"
msgstr "虚拟化类型："

#: sys-utils/lscpu.c:1096
msgid "Caches (sum of all):"
msgstr ""

#: sys-utils/lscpu.c:1100 sys-utils/lscpu.c:1130 sys-utils/lscpu.c:1162
#, fuzzy, c-format
#| msgid "%s"
msgid "%s:"
msgstr "%s"

#: sys-utils/lscpu.c:1100 sys-utils/lscpu.c:1130
#, c-format
msgid "%s cache:"
msgstr "%s 缓存："

#: sys-utils/lscpu.c:1103
#, c-format
msgid "%<PRIu64> (%d instance)"
msgid_plural "%<PRIu64> (%d instances)"
msgstr[0] ""

#: sys-utils/lscpu.c:1112
#, c-format
msgid "%s (%d instance)"
msgid_plural "%s (%d instances)"
msgstr[0] ""

#: sys-utils/lscpu.c:1127
msgid "Caches:"
msgstr "缓存："

#: sys-utils/lscpu.c:1146
msgid "NUMA:"
msgstr ""

#: sys-utils/lscpu.c:1148
msgid "NUMA node(s):"
msgstr "NUMA 节点："

#: sys-utils/lscpu.c:1150
#, c-format
msgid "NUMA node%d CPU(s):"
msgstr "NUMA 节点%d CPU："

#: sys-utils/lscpu.c:1158
#, fuzzy
#| msgid "Inheritable capabilities: "
msgid "Vulnerabilities:"
msgstr "可继承的权能："

#: sys-utils/lscpu.c:1162
#, fuzzy, c-format
#| msgid "unknown capability \"%s\""
msgid "Vulnerability %s:"
msgstr "未知权能“%s”"

#: sys-utils/lscpu.c:1180
msgid "Display information about the CPU architecture.\n"
msgstr "显示 CPU 架构信息。\n"

#: sys-utils/lscpu.c:1183
msgid " -a, --all               print both online and offline CPUs (default for -e)\n"
msgstr " -a, --all               同时打印在线和离线 CPU (-e 选项默认值)\n"

#: sys-utils/lscpu.c:1184
msgid " -b, --online            print online CPUs only (default for -p)\n"
msgstr " -b, --online            只打印在线 CPU (-p 选项默认值)\n"

#: sys-utils/lscpu.c:1185
#, fuzzy
#| msgid " -b, --bytes            print sizes in bytes rather than in human readable format\n"
msgid " -B, --bytes             print sizes in bytes rather than in human readable format\n"
msgstr " -b, --bytes           以字节为单位而非易读的格式来打印大小\n"

#: sys-utils/lscpu.c:1186
#, fuzzy
#| msgid " -e, --extended[=<list>] print out an extended readable format\n"
msgid " -C, --caches[=<list>]   info about caches in extended readable format\n"
msgstr " -e, --extended[=<列表>] 打印扩展的可读格式\n"

#: sys-utils/lscpu.c:1187
msgid " -c, --offline           print offline CPUs only\n"
msgstr " -c, --offline           只打印离线 CPU\n"

#: sys-utils/lscpu.c:1188
#, fuzzy
#| msgid " -J, --json             use JSON output format\n"
msgid " -J, --json              use JSON for default or extended format\n"
msgstr " -J, --json              使用 JSON 输出格式\n"

#: sys-utils/lscpu.c:1189
msgid " -e, --extended[=<list>] print out an extended readable format\n"
msgstr " -e, --extended[=<列表>] 打印扩展的可读格式\n"

#: sys-utils/lscpu.c:1190
msgid " -p, --parse[=<list>]    print out a parsable format\n"
msgstr " -p, --parse[=<列表>]    打印可解析格式\n"

#: sys-utils/lscpu.c:1191
msgid " -s, --sysroot <dir>     use specified directory as system root\n"
msgstr " -s, --sysroot <目录>    以指定目录作为系统根目录\n"

#: sys-utils/lscpu.c:1192
msgid " -x, --hex               print hexadecimal masks rather than lists of CPUs\n"
msgstr " -x, --hex               打印十六进制掩码而非 CPU 列表\n"

#: sys-utils/lscpu.c:1193
msgid " -y, --physical          print physical instead of logical IDs\n"
msgstr " -y, --physical          打印物理 ID 而非逻辑 ID\n"

#: sys-utils/lscpu.c:1194
msgid "     --hierarchic[=when] use subsections in summary (auto, never, always)\n"
msgstr ""

#: sys-utils/lscpu.c:1195
#, fuzzy
#| msgid " -O, --output-all     output all columns\n"
msgid "     --output-all        print all available columns for -e, -p or -C\n"
msgstr " -O, --output-all     输出所有列\n"

#: sys-utils/lscpu.c:1199
#, fuzzy
#| msgid ""
#| "\n"
#| "Available columns (for -o):\n"
msgid ""
"\n"
"Available output columns for -e or -p:\n"
msgstr ""
"\n"
"可用列(用于 -o)：\n"

#: sys-utils/lscpu.c:1203
#, fuzzy
#| msgid ""
#| "\n"
#| "Available columns (for -o):\n"
msgid ""
"\n"
"Available output columns for -C:\n"
msgstr ""
"\n"
"可用列(用于 -o)：\n"

#: sys-utils/lscpu.c:1319
#, fuzzy
#| msgid "unsupported --summary argument"
msgid "unsupported --flat argument"
msgstr "不支持的 --summary 参数"

#: sys-utils/lscpu.c:1343
#, c-format
msgid "%s: options --all, --online and --offline may only be used with options --extended or --parse.\n"
msgstr "%s：--all、--online 和 --offline 选项只能与 --extended 或 --parse 选项一起使用。\n"

#: sys-utils/lscpu-cputype.c:604
msgid "error: uname failed"
msgstr "错误：uname 失败"

#: sys-utils/lscpu-cputype.c:711
#, c-format
msgid "failed to determine number of CPUs: %s"
msgstr "确定 CPU 数 失败：%s"

#: sys-utils/lscpu-cputype.c:914
msgid "Failed to extract the node number"
msgstr "提取节点号失败"

#: sys-utils/lscpu-virt.c:494
#, fuzzy
#| msgid "cannot set signal handler"
msgid "cannot restore signal handler"
msgstr "无法设置信号处理函数"

#: sys-utils/lsipc.c:150
msgid "Resource key"
msgstr "资源键"

#: sys-utils/lsipc.c:150
msgid "Key"
msgstr "键"

#: sys-utils/lsipc.c:151
msgid "Resource ID"
msgstr "资源 ID"

#: sys-utils/lsipc.c:151
msgid "ID"
msgstr "ID"

#: sys-utils/lsipc.c:152
msgid "Owner's username or UID"
msgstr "拥有者的用户名或 UID"

#: sys-utils/lsipc.c:152
msgid "Owner"
msgstr "拥有者"

#: sys-utils/lsipc.c:153
msgid "Permissions"
msgstr "权限"

#: sys-utils/lsipc.c:154
msgid "Creator UID"
msgstr " 创建者 UID"

#: sys-utils/lsipc.c:155
msgid "Creator user"
msgstr " 创建者 用户"

#: sys-utils/lsipc.c:156
msgid "Creator GID"
msgstr "创建者 GID"

#: sys-utils/lsipc.c:157
msgid "Creator group"
msgstr "创建者组"

#: sys-utils/lsipc.c:158
msgid "User ID"
msgstr "用户 ID"

#: sys-utils/lsipc.c:158
msgid "UID"
msgstr "UID"

#: sys-utils/lsipc.c:159
msgid "User name"
msgstr "用户名"

#: sys-utils/lsipc.c:160
msgid "Group ID"
msgstr " 组 ID"

#: sys-utils/lsipc.c:160
msgid "GID"
msgstr "GID"

#: sys-utils/lsipc.c:161
msgid "Group name"
msgstr "组名"

#: sys-utils/lsipc.c:162
msgid "Time of the last change"
msgstr "上次更改时间"

#: sys-utils/lsipc.c:162
msgid "Last change"
msgstr "上次更改"

#: sys-utils/lsipc.c:165
msgid "Bytes used"
msgstr "已用字节数"

#: sys-utils/lsipc.c:166
msgid "Number of messages"
msgstr "消息数"

#: sys-utils/lsipc.c:166
msgid "Messages"
msgstr "消息"

#: sys-utils/lsipc.c:167
msgid "Time of last msg sent"
msgstr "上次发消息的时间"

#: sys-utils/lsipc.c:167
msgid "Msg sent"
msgstr " 消息已发送"

#: sys-utils/lsipc.c:168
msgid "Time of last msg received"
msgstr "收到上条消息的时间"

#: sys-utils/lsipc.c:168
msgid "Msg received"
msgstr "消息已收到"

#: sys-utils/lsipc.c:169
msgid "PID of the last msg sender"
msgstr "上条消息发送者的 PID"

#: sys-utils/lsipc.c:169
msgid "Msg sender"
msgstr " 消息发送者"

#: sys-utils/lsipc.c:170
msgid "PID of the last msg receiver"
msgstr "上条消息接收者的 PID"

#: sys-utils/lsipc.c:170
msgid "Msg receiver"
msgstr "消息接收者"

#: sys-utils/lsipc.c:173
msgid "Segment size"
msgstr "片段大小"

#: sys-utils/lsipc.c:174
msgid "Number of attached processes"
msgstr "附加的进程数"

#: sys-utils/lsipc.c:174
msgid "Attached processes"
msgstr "附加的进程"

#: sys-utils/lsipc.c:175
msgid "Status"
msgstr "状态"

#: sys-utils/lsipc.c:176
msgid "Attach time"
msgstr "附加时间"

#: sys-utils/lsipc.c:177
msgid "Detach time"
msgstr "分离时间"

#: sys-utils/lsipc.c:178
msgid "Creator command line"
msgstr "创建者命令行"

#: sys-utils/lsipc.c:178
msgid "Creator command"
msgstr "创建者命令"

#: sys-utils/lsipc.c:179
msgid "PID of the creator"
msgstr "创建者的 PID"

#: sys-utils/lsipc.c:179
msgid "Creator PID"
msgstr " 创建者 PID"

#: sys-utils/lsipc.c:180
msgid "PID of last user"
msgstr " 上个用户的 PID"

#: sys-utils/lsipc.c:180
msgid "Last user PID"
msgstr "上一用户 PID"

#: sys-utils/lsipc.c:183
msgid "Number of semaphores"
msgstr "信号量个数"

#: sys-utils/lsipc.c:183
msgid "Semaphores"
msgstr "信号量"

#: sys-utils/lsipc.c:184
msgid "Time of the last operation"
msgstr " 上次操作的时间"

#: sys-utils/lsipc.c:184
msgid "Last operation"
msgstr "上次操作"

#: sys-utils/lsipc.c:187
msgid "Resource name"
msgstr "资源名称"

#: sys-utils/lsipc.c:187
msgid "Resource"
msgstr "资源"

#: sys-utils/lsipc.c:188
msgid "Resource description"
msgstr "资源描述"

#: sys-utils/lsipc.c:188
msgid "Description"
msgstr "描述"

#: sys-utils/lsipc.c:189
msgid "Currently used"
msgstr "当前已使用"

#: sys-utils/lsipc.c:189
msgid "Used"
msgstr "已使用"

#: sys-utils/lsipc.c:190
msgid "Currently use percentage"
msgstr "当前使用比例"

#: sys-utils/lsipc.c:190
msgid "Use"
msgstr "使用"

#: sys-utils/lsipc.c:191
msgid "System-wide limit"
msgstr "系统级限制"

#: sys-utils/lsipc.c:191
msgid "Limit"
msgstr "限制"

#: sys-utils/lsipc.c:226
#, c-format
msgid "column %s does not apply to the specified IPC"
msgstr "列 %s 不适用于指定的 IPC"

#: sys-utils/lsipc.c:302
msgid " -g, --global      info about system-wide usage (may be used with -m, -q and -s)\n"
msgstr " -g, --global      有关系统范围使用量的信息(可与 -m, -q 和 -s 共用)\n"

#: sys-utils/lsipc.c:303
msgid " -i, --id <id>     print details on resource identified by <id>\n"
msgstr " -i, --id <id>     打印由<id>标识的资源的详细信息\n"

#: sys-utils/lsipc.c:309
msgid " -b, --bytes              print SIZE in bytes rather than in human readable format\n"
msgstr " -b, --bytes              以字节为打印 SIZE，而非易读格式\n"

#: sys-utils/lsipc.c:310
msgid " -c, --creator            show creator and owner\n"
msgstr " -c, --creator            显示创建者和拥有者\n"

#: sys-utils/lsipc.c:312
msgid " -J, --json               use the JSON output format\n"
msgstr " -J, --json               使用 JSON 输出格式\n"

#: sys-utils/lsipc.c:314
msgid " -l, --list               force list output format (for example with --id)\n"
msgstr " -l, --list               强制以列表格式输出(如与 --id 共用)\n"

#: sys-utils/lsipc.c:316
msgid " -P, --numeric-perms      print numeric permissions (PERMS column)\n"
msgstr " -P, --numeric-perms      打印权限数值(PERMS 列)\n"

#: sys-utils/lsipc.c:318
msgid " -t, --time               show attach, detach and change times\n"
msgstr " -t, --time               显示附加、脱离和更改时间\n"

#: sys-utils/lsipc.c:325
#, c-format
msgid ""
"\n"
"Generic columns:\n"
msgstr ""
"\n"
"常规选项：\n"

#: sys-utils/lsipc.c:329
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "Shared-memory columns (--shmems):\n"
msgid ""
"\n"
"Shared-memory columns (--shmems):\n"
msgstr ""
"\n"
"共享内存段 shmid=%d\n"

#: sys-utils/lsipc.c:333
#, c-format
msgid ""
"\n"
"Message-queue columns (--queues):\n"
msgstr ""
"\n"
"消息队列 列(queues)：\n"

#: sys-utils/lsipc.c:337
#, c-format
msgid ""
"\n"
"Semaphore columns (--semaphores):\n"
msgstr ""
"\n"
"信号量 列(--semaphores)：\n"

#: sys-utils/lsipc.c:341
#, c-format
msgid ""
"\n"
"Summary columns (--global):\n"
msgstr ""
"\n"
"摘要 列(--global)：\n"

#: sys-utils/lsipc.c:429
#, c-format
msgid ""
"Elements:\n"
"\n"
msgstr ""
"元素：\n"
"\n"

#: sys-utils/lsipc.c:709 sys-utils/lsipc.c:873 sys-utils/lsipc.c:1072
msgid "failed to set data"
msgstr "设置数据失败"

#: sys-utils/lsipc.c:734
msgid "Number of semaphore identifiers"
msgstr "信号量标识符的数量"

#: sys-utils/lsipc.c:735
msgid "Total number of semaphores"
msgstr "信号量的总数"

#: sys-utils/lsipc.c:736
msgid "Max semaphores per semaphore set."
msgstr "每个信号量集的最大信号量数。"

#: sys-utils/lsipc.c:737
msgid "Max number of operations per semop(2)"
msgstr "每个 semop(2) 的最大操作数"

#: sys-utils/lsipc.c:738
msgid "Semaphore max value"
msgstr "信号量的最大值"

#: sys-utils/lsipc.c:898
msgid "Number of message queues"
msgstr "消息队列的数目"

#: sys-utils/lsipc.c:899
msgid "Max size of message (bytes)"
msgstr "消息的最大尺寸(字节)"

#: sys-utils/lsipc.c:900
msgid "Default max size of queue (bytes)"
msgstr "队列的默认最大尺寸(字节)"

#: sys-utils/lsipc.c:1014 sys-utils/lsipc.c:1033
msgid "hugetlb"
msgstr "hugetlb"

#: sys-utils/lsipc.c:1015 sys-utils/lsipc.c:1040
msgid "noreserve"
msgstr "noreserve"

#: sys-utils/lsipc.c:1097
msgid "Shared memory segments"
msgstr "共享内存段"

#: sys-utils/lsipc.c:1098
msgid "Shared memory pages"
msgstr "共享内存页"

#: sys-utils/lsipc.c:1099
msgid "Max size of shared memory segment (bytes)"
msgstr "共享内存段的最大尺寸(字节)"

#: sys-utils/lsipc.c:1100
msgid "Min size of shared memory segment (bytes)"
msgstr "共享内存段的最小尺寸(字节)"

#: sys-utils/lsipc.c:1171
msgid "failed to parse IPC identifier"
msgstr "解析 IPC 标识符失败"

#: sys-utils/lsipc.c:1268
msgid "--global is mutually exclusive with --creator, --id and --time"
msgstr "--global 与 --creator, --id 和 --time 互斥"

#: sys-utils/lsirq.c:60
#, fuzzy
#| msgid "Display kernel profiling information.\n"
msgid "Utility to display kernel interrupt information."
msgstr "显示内核分析信息。\n"

#: sys-utils/lsmem.c:126
msgid "start and end address of the memory range"
msgstr ""

#: sys-utils/lsmem.c:127
#, fuzzy
#| msgid "size of the device"
msgid "size of the memory range"
msgstr "磁盘容量"

#: sys-utils/lsmem.c:128
msgid "online status of the memory range"
msgstr ""

#: sys-utils/lsmem.c:129
#, fuzzy
#| msgid " removable"
msgid "memory is removable"
msgstr " 可移动"

#: sys-utils/lsmem.c:130
msgid "memory block number or blocks range"
msgstr ""

#: sys-utils/lsmem.c:131
#, fuzzy
#| msgid "not enough memory"
msgid "numa node of memory"
msgstr "内存不足"

#: sys-utils/lsmem.c:132
msgid "valid zones for the memory range"
msgstr ""

#: sys-utils/lsmem.c:259
msgid "online"
msgstr "在线"

#: sys-utils/lsmem.c:260
msgid "offline"
msgstr "离线"

#: sys-utils/lsmem.c:261
msgid "on->off"
msgstr ""

#: sys-utils/lsmem.c:315 sys-utils/lsmem.c:322
#, fuzzy
#| msgid "get blocksize"
msgid "Memory block size:"
msgstr "获得块大小"

#: sys-utils/lsmem.c:316 sys-utils/lsmem.c:326
#, fuzzy
#| msgid "max total shared memory"
msgid "Total online memory:"
msgstr "最大总共享内存"

#: sys-utils/lsmem.c:317 sys-utils/lsmem.c:330
msgid "Total offline memory:"
msgstr ""

#: sys-utils/lsmem.c:343
#, c-format
msgid "Failed to open %s"
msgstr "打开 %s 失败"

#: sys-utils/lsmem.c:462 sys-utils/lsmem.c:467
#, fuzzy
#| msgid "failed to parse number of blocks"
msgid "failed to read memory block size"
msgstr "解析块数失败"

#: sys-utils/lsmem.c:497
#, fuzzy
#| msgid "This system does not support rescanning of CPUs"
msgid "This system does not support memory blocks"
msgstr "该系统不支持重新扫描 CPU"

#: sys-utils/lsmem.c:522
msgid "List the ranges of available memory with their online status.\n"
msgstr ""

#: sys-utils/lsmem.c:527
#, fuzzy
#| msgid " -a, --all            print all devices\n"
msgid " -a, --all            list each individual memory block\n"
msgstr " -a, --all            打印所有设备\n"

#: sys-utils/lsmem.c:533
#, fuzzy
#| msgid " -o, --output <list>       output columns\n"
msgid " -S, --split <list>   split ranges by specified columns\n"
msgstr " -o, --output <列表>       输出列\n"

#: sys-utils/lsmem.c:534
#, fuzzy
#| msgid " -s, --sysroot <dir>     use specified directory as system root\n"
msgid " -s, --sysroot <dir>  use the specified directory as system root\n"
msgstr " -s, --sysroot <目录>    以指定目录作为系统根目录\n"

#: sys-utils/lsmem.c:535
msgid "     --summary[=when] print summary information (never,always or only)\n"
msgstr ""

#: sys-utils/lsmem.c:661
#, fuzzy
#| msgid "options --setgroups=allow and --map-root-user are mutually exclusive"
msgid "options --{raw,json,pairs} and --summary=only are mutually exclusive"
msgstr "--setgroups=allow 和 --map-root-user 选项是互斥的"

#: sys-utils/lsmem.c:669
#, fuzzy
#| msgid "invalid argument of -r"
msgid "invalid argument to --sysroot"
msgstr "-r 的参数无效"

#: sys-utils/lsmem.c:717
msgid "Failed to initialize output column"
msgstr "初始化输出列失败"

#: sys-utils/lsns.c:117
msgid "namespace identifier (inode number)"
msgstr "名字空间标识符 (inode 号)"

#: sys-utils/lsns.c:118
msgid "kind of namespace"
msgstr "名字空间类型"

#: sys-utils/lsns.c:119
msgid "path to the namespace"
msgstr "名字空间路径"

#: sys-utils/lsns.c:120
msgid "number of processes in the namespace"
msgstr "名字空间中的进程数"

#: sys-utils/lsns.c:121
msgid "lowest PID in the namespace"
msgstr "名字空间中的最低 PID"

#: sys-utils/lsns.c:122
msgid "PPID of the PID"
msgstr "PID 的 PPID"

#: sys-utils/lsns.c:123
msgid "command line of the PID"
msgstr "PID 的命令行"

#: sys-utils/lsns.c:124
msgid "UID of the PID"
msgstr "PID 的 UID"

#: sys-utils/lsns.c:125
msgid "username of the PID"
msgstr "PID 的用户名"

#: sys-utils/lsns.c:126
msgid "namespace ID as used by network subsystem"
msgstr ""

#: sys-utils/lsns.c:127
msgid "nsfs mountpoint (usually used network subsystem)"
msgstr ""

#: sys-utils/lsns.c:128
#, fuzzy
#| msgid "namespace identifier (inode number)"
msgid "parent namespace identifier (inode number)"
msgstr "名字空间标识符 (inode 号)"

#: sys-utils/lsns.c:129
#, fuzzy
#| msgid "namespace identifier (inode number)"
msgid "owner namespace identifier (inode number)"
msgstr "名字空间标识符 (inode 号)"

#: sys-utils/lsns.c:1285
#, c-format
msgid " %s [options] [<namespace>]\n"
msgstr " %s [选项] [<名字空间>]\n"

#: sys-utils/lsns.c:1288
msgid "List system namespaces.\n"
msgstr "列出系统名字空间。\n"

#: sys-utils/lsns.c:1296
#, fuzzy
#| msgid " -q, --quiet         suppress output messages"
msgid " -P, --persistent       namespaces without processes\n"
msgstr " -q, --quiet         禁止输出信息"

#: sys-utils/lsns.c:1297
msgid " -p, --task <pid>       print process namespaces\n"
msgstr " -p, --task <pid>       打印进程名字空间\n"

#: sys-utils/lsns.c:1300
msgid " -W, --nowrap           don't use multi-line representation\n"
msgstr " -W, --nowrap           不要使用多行表现\n"

#: sys-utils/lsns.c:1301
#, fuzzy
#| msgid " -t, --type <name>      namespace type (mnt, net, ipc, user, pid, uts, cgroup)\n"
msgid " -t, --type <name>      namespace type (mnt, net, ipc, user, pid, uts, cgroup, time)\n"
msgstr " -t, --type <name>      名字空间类型(mnt, net, ipc, user, pid, uts, cgroup)\n"

#: sys-utils/lsns.c:1302
#, fuzzy
#| msgid "     --tree             enable tree format output if possible\n"
msgid " -T, --tree <rel>       use tree format (parent, owner, or process)\n"
msgstr "     --tree             可能的话，启用树形格式化输出\n"

#: sys-utils/lsns.c:1403
#, c-format
msgid "unknown namespace type: %s"
msgstr "未知的名字空间类型︰ %s"

#: sys-utils/lsns.c:1423
#, fuzzy, c-format
#| msgid "unknown namespace type: %s"
msgid "unknown tree type: %s"
msgstr "未知的名字空间类型︰ %s"

#: sys-utils/lsns.c:1445
msgid "--task is mutually exclusive with <namespace>"
msgstr "--task 与 <名字空间> 互斥"

#: sys-utils/lsns.c:1446
msgid "invalid namespace argument"
msgstr "无效的名字空间参数"

#: sys-utils/lsns.c:1476
#, fuzzy
#| msgid "--pty is not supported for your system"
msgid "--tree={parent|owner} is unsupported for your system"
msgstr "--pty 在您的系统上不受支持"

#: sys-utils/lsns.c:1504
#, c-format
msgid "not found namespace: %ju"
msgstr "找不到名字空间︰ %ju"

#: sys-utils/mount.c:63 sys-utils/umount.c:126
#, fuzzy
#| msgid "permission denied"
msgid "drop permissions failed."
msgstr "权限不足"

#: sys-utils/mount.c:83 sys-utils/umount.c:65
#, c-format
msgid "%s from %s (libmount %s"
msgstr "%s，来自 %s(libmount %s"

#: sys-utils/mount.c:130
msgid "failed to read mtab"
msgstr "读取 mtab 失败"

#: sys-utils/mount.c:192 sys-utils/mount.c:259 sys-utils/umount.c:209
#, c-format
msgid "%-25s: ignored\n"
msgstr "%-25s：已忽略\n"

#: sys-utils/mount.c:193
#, c-format
msgid "%-25s: already mounted\n"
msgstr "%-25s：已经挂载\n"

#: sys-utils/mount.c:300
#, c-format
msgid "%s: %s moved to %s.\n"
msgstr "%s：%s 已移到 %s。\n"

#: sys-utils/mount.c:302
#, c-format
msgid "%s: %s bound on %s.\n"
msgstr "%s：%s 已绑定到 %s 。\n"

#: sys-utils/mount.c:305 sys-utils/mount.c:309
#, c-format
msgid "%s: %s mounted on %s.\n"
msgstr "%s：%s 已挂臷到 %s。\n"

#: sys-utils/mount.c:307
#, c-format
msgid "%s: %s propagation flags changed.\n"
msgstr "%s：%s 传播标志已更改。\n"

#: sys-utils/mount.c:327
#, fuzzy, c-format
#| msgid ""
#| "mount: %s does not contain SELinux labels.\n"
#| "       You just mounted an file system that supports labels which does not\n"
#| "       contain labels, onto an SELinux box. It is likely that confined\n"
#| "       applications will generate AVC messages and not be allowed access to\n"
#| "       this file system.  For more details see restorecon(8) and mount(8).\n"
msgid ""
"mount: %s does not contain SELinux labels.\n"
"       You just mounted a file system that supports labels which does not\n"
"       contain labels, onto an SELinux box. It is likely that confined\n"
"       applications will generate AVC messages and not be allowed access to\n"
"       this file system.  For more details see restorecon(8) and mount(8).\n"
msgstr ""
"mount：%s 不包含 SELinux 标志\n"
"       您刚将一个支持标签但未包含标签的文件系统挂载到了 SELinux 机器上。\n"
"       受限制的应用程序可能会生成 AVC 消息，并被阻止访问该文件系统。\n"
"       更多详细信息请参阅 restorecon(8) 和 mount(8)。\n"

#: sys-utils/mount.c:356
#, c-format
msgid ""
"mount: (hint) your fstab has been modified, but systemd still uses\n"
"       the old version; use 'systemctl daemon-reload' to reload.\n"
msgstr ""

#: sys-utils/mount.c:388
#, c-format
msgid "       dmesg(1) may have more information after failed mount system call.\n"
msgstr ""

#: sys-utils/mount.c:417
#, c-format
msgid "%s: failed to parse"
msgstr "%s：解析失败"

#: sys-utils/mount.c:459
#, c-format
msgid "unsupported option format: %s"
msgstr "不支持的参数格式：%s"

#: sys-utils/mount.c:465
#, c-format
msgid "failed to append option '%s'"
msgstr "追加选项“%s”失败"

#: sys-utils/mount.c:486
#, c-format
msgid ""
" %1$s [-lhV]\n"
" %1$s -a [options]\n"
" %1$s [options] [--source] <source> | [--target] <directory>\n"
" %1$s [options] <source> <directory>\n"
" %1$s <operation> <mountpoint> [<target>]\n"
msgstr ""
" %1$s [-lhV]\n"
" %1$s -a [选项]\n"
" %1$s [选项] [--source] <源> | [--target] <目录>\n"
" %1$s [选项] <源> <目录>\n"
" %1$s <操作> <挂载点> [<目标>]\n"

#: sys-utils/mount.c:494
msgid "Mount a filesystem.\n"
msgstr "挂载文件系统。\n"

#: sys-utils/mount.c:497
#, fuzzy
#| msgid " -a, --all               unmount all filesystems\n"
msgid " -a, --all               mount all filesystems mentioned in fstab\n"
msgstr " -a, --all               卸载所有文件系统\n"

#: sys-utils/mount.c:498 sys-utils/umount.c:94
msgid " -c, --no-canonicalize   don't canonicalize paths\n"
msgstr " -c, --no-canonicalize   不对路径规范化\n"

#: sys-utils/mount.c:499
#, fuzzy
#| msgid "     --fake              dry run; skip the umount(2) syscall\n"
msgid " -f, --fake              dry run; skip the mount(2) syscall\n"
msgstr "     --fake              空运行；跳过 umount(2) 系统调用\n"

#: sys-utils/mount.c:500
#, fuzzy
#| msgid " -f, --force            force hardlinking across filesystems"
msgid " -F, --fork              fork off for each device (use with -a)\n"
msgstr " -f, --force            强制跨文件系统进行硬链接"

#: sys-utils/mount.c:501
#, fuzzy
#| msgid " -a, --all           trim all mounted filesystems that are supported\n"
msgid " -T, --fstab <path>      alternative file to /etc/fstab\n"
msgstr " -a, --all           修剪不支持的所有已挂载文件系统\n"

#: sys-utils/mount.c:502
msgid " -i, --internal-only     don't call the mount.<type> helpers\n"
msgstr " -i, --internal-only     不调用 mount.<type> 辅助程序\n"

#: sys-utils/mount.c:503
msgid " -l, --show-labels       show also filesystem labels\n"
msgstr " -l, --show-labels       也显示文件系统标签\n"

#: sys-utils/mount.c:504
msgid " -m, --mkdir[=<mode>]    alias to '-o X-mount.mkdir[=<mode>]'\n"
msgstr ""

#: sys-utils/mount.c:505 sys-utils/umount.c:99
msgid " -n, --no-mtab           don't write to /etc/mtab\n"
msgstr " -n, --no-mtab           不写 /etc/mtab\n"

#: sys-utils/mount.c:506
msgid ""
"     --options-mode <mode>\n"
"                         what to do with options loaded from fstab\n"
msgstr ""

#: sys-utils/mount.c:508
#, fuzzy
#| msgid ""
#| "     --propagation slave|shared|private|unchanged\n"
#| "                           modify mount propagation in mount namespace\n"
msgid ""
"     --options-source <source>\n"
"                         mount options source\n"
msgstr ""
"     --propagation slave|shared|private|unchanged\n"
"                           修改 mount 名字空间中的 mount 传播\n"

#: sys-utils/mount.c:510
msgid ""
"     --options-source-force\n"
"                         force use of options from fstab/mtab\n"
msgstr ""

#: sys-utils/mount.c:512
#, fuzzy
#| msgid " -P         check filesystems in parallel, including root\n"
msgid "     --onlyonce          check if filesystem is already mounted\n"
msgstr " -P         并行检查文件系统，包括 root\n"

#: sys-utils/mount.c:513
#, fuzzy
#| msgid " -o, --options <list>     comma-separated list of swap options\n"
msgid " -o, --options <list>    comma-separated list of mount options\n"
msgstr " -o, --options <列表>     以英文逗号分隔的 swap 选项\n"

#: sys-utils/mount.c:514 sys-utils/umount.c:101
msgid " -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
msgstr " -O, --test-opts <列表>  限制文件系统集合(和 -a 选项一起使用)\n"

#: sys-utils/mount.c:515
#, fuzzy
#| msgid " -r, --read-only          forced open cfdisk in read-only mode\n"
msgid " -r, --read-only         mount the filesystem read-only (same as -o ro)\n"
msgstr " -r, --read-only          强制以只读模式打开 cfdisk\n"

#: sys-utils/mount.c:516 sys-utils/umount.c:104
msgid " -t, --types <list>      limit the set of filesystem types\n"
msgstr " -t, --types <列表>      限制文件系统集合\n"

#: sys-utils/mount.c:517
#, fuzzy
#| msgid ""
#| "     --source <src>      explicitly specifies source (path, label, uuid)\n"
#| "     --target <target>   explicitly specifies mountpoint\n"
msgid "     --source <src>      explicitly specifies source (path, label, uuid)\n"
msgstr ""
"     --source <源>       指明源(路径、标签、uuid)\n"
"     --target <目标>     指明挂载点\n"

#: sys-utils/mount.c:518
#, fuzzy
#| msgid ""
#| "     --source <src>      explicitly specifies source (path, label, uuid)\n"
#| "     --target <target>   explicitly specifies mountpoint\n"
msgid "     --target <target>   explicitly specifies mountpoint\n"
msgstr ""
"     --source <源>       指明源(路径、标签、uuid)\n"
"     --target <目标>     指明挂载点\n"

#: sys-utils/mount.c:519
#, fuzzy
#| msgid " --default                         use default terminal settings\n"
msgid ""
"     --target-prefix <path>\n"
"                         specifies path used for all mountpoints\n"
msgstr " --default                         使用默认终端设置\n"

#: sys-utils/mount.c:521 sys-utils/umount.c:105
msgid " -v, --verbose           say what is being done\n"
msgstr " -v, --verbose           打印当前进行的操作\n"

#: sys-utils/mount.c:522
msgid " -w, --rw, --read-write  mount the filesystem read-write (default)\n"
msgstr " -w, --rw, --read-write  以读写方式挂载文件系统(默认)\n"

#: sys-utils/mount.c:523
#, fuzzy
#| msgid " -S, --setuid <uid>     set uid in entered namespace\n"
msgid " -N, --namespace <ns>    perform mount in another namespace\n"
msgstr " -S, --setuid <uid>     设置进入空间中的 uid\n"

#: sys-utils/mount.c:529
#, fuzzy
#| msgid "Resource"
msgid "Source:\n"
msgstr "资源"

#: sys-utils/mount.c:530
#, fuzzy
#| msgid " -s, --size <size>         device size\n"
msgid " -L, --label <label>     synonym for LABEL=<label>\n"
msgstr " -s, --size <尺寸>         设备尺寸\n"

#: sys-utils/mount.c:531
#, fuzzy
#| msgid " -U, --uuid <uuid>          convert UUID to device name\n"
msgid " -U, --uuid <uuid>       synonym for UUID=<uuid>\n"
msgstr " -U, --uuid <uuid>          将 UUID 转换为设备名\n"

#: sys-utils/mount.c:532
#, fuzzy
#| msgid " -L, --label LABEL         specify label\n"
msgid " LABEL=<label>           specifies device by filesystem label\n"
msgstr " -L, --label 标签          指定标签\n"

#: sys-utils/mount.c:533
msgid " UUID=<uuid>             specifies device by filesystem UUID\n"
msgstr ""

#: sys-utils/mount.c:534
msgid " PARTLABEL=<label>       specifies device by partition label\n"
msgstr ""

#: sys-utils/mount.c:535
msgid " PARTUUID=<uuid>         specifies device by partition UUID\n"
msgstr ""

#: sys-utils/mount.c:536
#, fuzzy
#| msgid " <dev>                     device (usually disk) path\n"
msgid " ID=<id>                 specifies device by udev hardware ID\n"
msgstr " <设备>                    设备(通常是磁盘)的路径\n"

#: sys-utils/mount.c:537
#, fuzzy
#| msgid " <dev>                     device (usually disk) path\n"
msgid " <device>                specifies device by path\n"
msgstr " <设备>                    设备(通常是磁盘)的路径\n"

#: sys-utils/mount.c:538
msgid " <directory>             mountpoint for bind mounts (see --bind/rbind)\n"
msgstr ""

#: sys-utils/mount.c:539
#, fuzzy
#| msgid " -f, --file <file>    use a specific file instead of %s\n"
msgid " <file>                  regular file for loopdev setup\n"
msgstr " -F, --file <文件>    用指定文件代替 %s\n"

#: sys-utils/mount.c:542
#, fuzzy
#| msgid ""
#| "\n"
#| "Options:\n"
msgid "Operations:\n"
msgstr ""
"\n"
"选项：\n"

#: sys-utils/mount.c:543
#, fuzzy
#| msgid " -c, --content          compare only contents, ignore permission, etc."
msgid " -B, --bind              mount a subtree somewhere else (same as -o bind)\n"
msgstr " -c, --content          只比较内容，忽略权限等其它信息"

#: sys-utils/mount.c:544
#, fuzzy
#| msgid " -n, --net                 unshare network namespace\n"
msgid " -M, --move              move a subtree to some other place\n"
msgstr " -n, --net                 取消共享网络名字空间\n"

#: sys-utils/mount.c:545
#, fuzzy
#| msgid " -m, --mount               unshare mounts namespace\n"
msgid " -R, --rbind             mount a subtree and all submounts somewhere else\n"
msgstr " -m, --mount               取消共享挂载名字空间\n"

#: sys-utils/mount.c:546
#, fuzzy
#| msgid " -s, --shared             get a shared lock\n"
msgid " --make-shared           mark a subtree as shared\n"
msgstr " -s, --shared             获取共享锁\n"

#: sys-utils/mount.c:547
#, fuzzy
#| msgid " -s, --shared             get a shared lock\n"
msgid " --make-slave            mark a subtree as slave\n"
msgstr " -s, --shared             获取共享锁\n"

#: sys-utils/mount.c:548
msgid " --make-private          mark a subtree as private\n"
msgstr ""

#: sys-utils/mount.c:549
msgid " --make-unbindable       mark a subtree as unbindable\n"
msgstr ""

#: sys-utils/mount.c:550
#, fuzzy
#| msgid " -s, --shared             get a shared lock\n"
msgid " --make-rshared          recursively mark a whole subtree as shared\n"
msgstr " -s, --shared             获取共享锁\n"

#: sys-utils/mount.c:551
#, fuzzy
#| msgid " -R, --recursive         recursively unmount a target with all its children\n"
msgid " --make-rslave           recursively mark a whole subtree as slave\n"
msgstr " -R, --recursive         递归卸载目录及其子对象\n"

#: sys-utils/mount.c:552
#, fuzzy
#| msgid " -R, --recursive         recursively unmount a target with all its children\n"
msgid " --make-rprivate         recursively mark a whole subtree as private\n"
msgstr " -R, --recursive         递归卸载目录及其子对象\n"

#: sys-utils/mount.c:553
msgid " --make-runbindable      recursively mark a whole subtree as unbindable\n"
msgstr ""

#: sys-utils/mount.c:704 sys-utils/umount.c:520
msgid "libmount context allocation failed"
msgstr "libmount 环境(context)分配失败"

#: sys-utils/mount.c:766 sys-utils/umount.c:582
msgid "failed to set options pattern"
msgstr "设置选项模式失败"

#: sys-utils/mount.c:818 sys-utils/umount.c:599
#, fuzzy, c-format
#| msgid "failed to set personality to %s"
msgid "failed to set target namespace to %s"
msgstr "无法将人格(personality)设置为 %s"

#: sys-utils/mount.c:986
msgid "source specified more than once"
msgstr "源指定了多次"

#: sys-utils/mountpoint.c:121
#, c-format
msgid ""
" %1$s [-qd] /path/to/directory\n"
" %1$s -x /dev/device\n"
msgstr ""
" %1$s [-qd] /目录/的/路径\n"
" %1$s -x /dev/设备\n"

#: sys-utils/mountpoint.c:125
msgid "Check whether a directory or file is a mountpoint.\n"
msgstr "检查目录或文件是否为挂载点。\n"

#: sys-utils/mountpoint.c:128
#, fuzzy
#| msgid ""
#| " -q, --quiet        quiet mode - don't print anything\n"
#| " -d, --fs-devno     print maj:min device number of the filesystem\n"
#| " -x, --devno        print maj:min device number of the block device\n"
msgid ""
" -q, --quiet        quiet mode - don't print anything\n"
"     --nofollow     do not follow symlink\n"
" -d, --fs-devno     print maj:min device number of the filesystem\n"
" -x, --devno        print maj:min device number of the block device\n"
msgstr ""
" -q, --quiet        安静模式 - 不打印任何信息\n"
" -d, --fs-devno     打印文件系统的 主：次 设备号\n"
" -x, --devno        打印块设备的主：次设备号\n"

#: sys-utils/mountpoint.c:210
#, c-format
msgid "%s is not a mountpoint\n"
msgstr "%s 不是一个挂载点\n"

#: sys-utils/mountpoint.c:216
#, c-format
msgid "%s is a mountpoint\n"
msgstr "%s 是一个挂载点\n"

#: sys-utils/nsenter.c:78 sys-utils/setarch.c:139 sys-utils/unshare.c:643
#, c-format
msgid " %s [options] [<program> [<argument>...]]\n"
msgstr " %s [选项] [<程序> [<参数>...]]\n"

#: sys-utils/nsenter.c:82
msgid "Run a program with namespaces of other processes.\n"
msgstr "以其他程序的名字空间运行某个程序。\n"

#: sys-utils/nsenter.c:85
msgid " -a, --all              enter all namespaces\n"
msgstr " -a, --all              进入所有名字空间\n"

#: sys-utils/nsenter.c:86
msgid " -t, --target <pid>     target process to get namespaces from\n"
msgstr " -t, --target <pid>     要获取名字空间的目标进程\n"

#: sys-utils/nsenter.c:87
msgid " -m, --mount[=<file>]   enter mount namespace\n"
msgstr " -m, --mount[=<文件>]   进入 mount 名字空间\n"

#: sys-utils/nsenter.c:88
msgid " -u, --uts[=<file>]     enter UTS namespace (hostname etc)\n"
msgstr " -u, --uts[=<文件>]     进入 UTS 名字空间(主机名等)\n"

#: sys-utils/nsenter.c:89
msgid " -i, --ipc[=<file>]     enter System V IPC namespace\n"
msgstr " -i, --ipc[=<文件>]     进入 System V IPC 名字空间\n"

#: sys-utils/nsenter.c:90
msgid " -n, --net[=<file>]     enter network namespace\n"
msgstr " -n, --net[=<文件>]     进入网络名字空间\n"

#: sys-utils/nsenter.c:91
msgid " -p, --pid[=<file>]     enter pid namespace\n"
msgstr " -p, --pid[=<文件>]     进入 pid 名字空间\n"

#: sys-utils/nsenter.c:92
msgid " -C, --cgroup[=<file>]  enter cgroup namespace\n"
msgstr " -C, --cgroup[=<文件>]  进入 cgroup 名字空间\n"

#: sys-utils/nsenter.c:93
msgid " -U, --user[=<file>]    enter user namespace\n"
msgstr " -U, --user[=<文件>]    进入用户名字空间\n"

#: sys-utils/nsenter.c:94
#, fuzzy
#| msgid " -p, --pid[=<file>]     enter pid namespace\n"
msgid " -T, --time[=<file>]    enter time namespace\n"
msgstr " -p, --pid[=<文件>]     进入 pid 名字空间\n"

#: sys-utils/nsenter.c:95
#, fuzzy
#| msgid " -S, --setuid <uid>     set uid in entered namespace\n"
msgid " -S, --setuid[=<uid>]   set uid in entered namespace\n"
msgstr " -S, --setuid <uid>     设置进入空间中的 uid\n"

#: sys-utils/nsenter.c:96
#, fuzzy
#| msgid " -G, --setgid <gid>     set gid in entered namespace\n"
msgid " -G, --setgid[=<gid>]   set gid in entered namespace\n"
msgstr " -G, --setgid <gid>     设置进入名字空间中的 gid\n"

#: sys-utils/nsenter.c:97
msgid "     --preserve-credentials do not touch uids or gids\n"
msgstr "     --preserve-credentials 不干涉 uid 或 gid\n"

#: sys-utils/nsenter.c:98
msgid " -r, --root[=<dir>]     set the root directory\n"
msgstr " -r, --root[=<目录>]     设置根目录\n"

#: sys-utils/nsenter.c:99
msgid " -w, --wd[=<dir>]       set the working directory\n"
msgstr " -w, --wd[=<dir>]       设置工作目录\n"

#: sys-utils/nsenter.c:100
#, fuzzy
#| msgid " -w, --wd[=<dir>]       set the working directory\n"
msgid " -W, --wdns <dir>       set the working directory in namespace\n"
msgstr " -w, --wd[=<dir>]       设置工作目录\n"

#: sys-utils/nsenter.c:101
#, fuzzy
#| msgid " -e, --return                  return exit code of the child process\n"
msgid " -e, --env              inherit environment variables from target process\n"
msgstr " -e, --return                  返回子进程的退出值\n"

#: sys-utils/nsenter.c:102
msgid " -F, --no-fork          do not fork before exec'ing <program>\n"
msgstr " -F, --no-fork          执行 <程序> 前不 fork\n"

#: sys-utils/nsenter.c:104
msgid " -Z, --follow-context   set SELinux context according to --target PID\n"
msgstr " -Z, --follow-context  根据 --target PID 设置 SELinux 环境\n"

#: sys-utils/nsenter.c:131
#, c-format
msgid "neither filename nor target pid supplied for %s"
msgstr "没有为 %s 提供文件名或目标 pid"

#: sys-utils/nsenter.c:353 sys-utils/unshare.c:828 sys-utils/unshare.c:884
msgid "failed to parse uid"
msgstr "解析 uid 失败"

#: sys-utils/nsenter.c:360 sys-utils/unshare.c:832 sys-utils/unshare.c:888
msgid "failed to parse gid"
msgstr "解析 gid 失败"

#: sys-utils/nsenter.c:406
msgid "no target PID specified for --follow-context"
msgstr "没有为 --follow-context 设置目标 PID"

#: sys-utils/nsenter.c:408
#, c-format
msgid "failed to get %d SELinux context"
msgstr "未能获取 %d SELinux 环境"

#: sys-utils/nsenter.c:411
#, c-format
msgid "failed to set exec context to '%s'"
msgstr "向“%s”设置 exec 环境失败"

#: sys-utils/nsenter.c:418
#, fuzzy
#| msgid "no target PID specified for --follow-context"
msgid "no target PID specified for --all"
msgstr "没有为 --follow-context 设置目标 PID"

#: sys-utils/nsenter.c:482
#, c-format
msgid "reassociate to namespace '%s' failed"
msgstr "重新关联到名字空间“%s”失败"

#: sys-utils/nsenter.c:498 sys-utils/nsenter.c:521
msgid "cannot open current working directory"
msgstr "打不开当前工作目录"

#: sys-utils/nsenter.c:505
msgid "change directory by root file descriptor failed"
msgstr "根据 root 文件描述符 更改目录失败"

#: sys-utils/nsenter.c:508
msgid "chroot failed"
msgstr "chroot 失败"

#: sys-utils/nsenter.c:528
msgid "change directory by working directory file descriptor failed"
msgstr "按工作目录文件描述符更改目录失败"

#: sys-utils/nsenter.c:537
#, fuzzy
#| msgid "failed to set the %s environment variable"
msgid "failed to get environment variables"
msgstr "设置环境变量 %s 失败"

#: sys-utils/nsenter.c:540
#, fuzzy
#| msgid "failed to set the %s environment variable"
msgid "failed to set environment variables"
msgstr "设置环境变量 %s 失败"

#: sys-utils/nsenter.c:549
#, fuzzy
#| msgid "cannot process %s"
msgid "can not get process stat"
msgstr "无法处理 %s"

#: sys-utils/nsenter.c:565 sys-utils/setpriv.c:1025 sys-utils/setpriv.c:1032
#: sys-utils/unshare.c:1085
msgid "setgroups failed"
msgstr "setgroups 失败"

#: sys-utils/pivot_root.c:34
#, c-format
msgid " %s [options] new_root put_old\n"
msgstr " %s [选项] 新根目录 旧根目录更名\n"

#: sys-utils/pivot_root.c:38
msgid "Change the root filesystem.\n"
msgstr "更改根文件系统。\n"

#: sys-utils/pivot_root.c:75
#, c-format
msgid "failed to change root from `%s' to `%s'"
msgstr "将根目录从“%s”更改为“%s”失败"

#: sys-utils/prlimit.c:77
msgid "address space limit"
msgstr "地址空间限制"

#: sys-utils/prlimit.c:78
msgid "max core file size"
msgstr "最大核心文件尺寸"

#: sys-utils/prlimit.c:79
msgid "CPU time"
msgstr "CPU 时间"

#: sys-utils/prlimit.c:79
msgid "seconds"
msgstr "秒数"

#: sys-utils/prlimit.c:80
msgid "max data size"
msgstr "最大数据尺寸"

#: sys-utils/prlimit.c:81
msgid "max file size"
msgstr "最大文件尺寸"

#: sys-utils/prlimit.c:82
msgid "max number of file locks held"
msgstr "最大文件锁保持数量"

#: sys-utils/prlimit.c:82
msgid "locks"
msgstr "锁"

#: sys-utils/prlimit.c:83
msgid "max locked-in-memory address space"
msgstr "最大内存锁定(locked-in-memory)地址空间"

#: sys-utils/prlimit.c:84
msgid "max bytes in POSIX mqueues"
msgstr "POSIX 消息队列中的最大字节数"

#: sys-utils/prlimit.c:85
msgid "max nice prio allowed to raise"
msgstr "允许提升的最大 nice 优先级"

#: sys-utils/prlimit.c:86
msgid "max number of open files"
msgstr "打开文件的最大数量"

#: sys-utils/prlimit.c:86
msgid "files"
msgstr "文件"

#: sys-utils/prlimit.c:87
msgid "max number of processes"
msgstr "最大进程数"

#: sys-utils/prlimit.c:88
msgid "max resident set size"
msgstr "最大驻留集尺寸"

#: sys-utils/prlimit.c:89
msgid "max real-time priority"
msgstr "最大实时优先级"

#: sys-utils/prlimit.c:90
msgid "timeout for real-time tasks"
msgstr "实时任务超时"

#: sys-utils/prlimit.c:90
msgid "microsecs"
msgstr "毫秒数"

#: sys-utils/prlimit.c:91
msgid "max number of pending signals"
msgstr "挂起(pending)信号的最大数量"

#: sys-utils/prlimit.c:91
msgid "signals"
msgstr "信号"

#: sys-utils/prlimit.c:92
msgid "max stack size"
msgstr "最大栈(stack)尺寸"

#: sys-utils/prlimit.c:125
msgid "resource name"
msgstr "资源名称"

#: sys-utils/prlimit.c:126
msgid "resource description"
msgstr "资源描述"

#: sys-utils/prlimit.c:127
msgid "soft limit"
msgstr "软限制"

#: sys-utils/prlimit.c:128
msgid "hard limit (ceiling)"
msgstr "硬限制(触顶)"

#: sys-utils/prlimit.c:129
msgid "units"
msgstr "单位"

#: sys-utils/prlimit.c:168
#, fuzzy, c-format
#| msgid " %s [options] [-p PID]\n"
msgid " %s [options] [--<resource>=<limit>] [-p PID]\n"
msgstr " %s [选项] [-p PID]\n"

#: sys-utils/prlimit.c:170
#, fuzzy, c-format
#| msgid " %s [options] -u <USER> COMMAND\n"
msgid " %s [options] [--<resource>=<limit>] COMMAND\n"
msgstr " %s [选项] -u <USER> COMMAND\n"

#: sys-utils/prlimit.c:173
msgid "Show or change the resource limits of a process.\n"
msgstr "显示或更改进程的资源限制。 \n"

#: sys-utils/prlimit.c:176
#, fuzzy
#| msgid ""
#| " -p, --pid <pid>        process id\n"
#| " -o, --output <list>    define which output columns to use\n"
#| "     --noheadings       don't print headings\n"
#| "     --raw              use the raw output format\n"
#| "     --verbose          verbose output\n"
#| " -h, --help             display this help and exit\n"
#| " -V, --version          output version information and exit\n"
msgid ""
" -p, --pid <pid>        process id\n"
" -o, --output <list>    define which output columns to use\n"
"     --noheadings       don't print headings\n"
"     --raw              use the raw output format\n"
"     --verbose          verbose output\n"
msgstr ""
" -p, --pid <pid>        进程 id\n"
" -o, --output <列表>    定义要使用的输出列\n"
"     --noheadings       不打印标题\n"
"     --raw              使用原生输出格式\n"
"     --verbose          详尽输出\n"
" -h, --help             显示此帮助并退出\n"
" -V, --version          输出版本信息并退出\n"

#: sys-utils/prlimit.c:184
#, fuzzy
#| msgid "Resource"
msgid ""
"\n"
"Resources:\n"
msgstr "资源"

#: sys-utils/prlimit.c:185
msgid ""
" -c, --core             maximum size of core files created\n"
" -d, --data             maximum size of a process's data segment\n"
" -e, --nice             maximum nice priority allowed to raise\n"
" -f, --fsize            maximum size of files written by the process\n"
" -i, --sigpending       maximum number of pending signals\n"
" -l, --memlock          maximum size a process may lock into memory\n"
" -m, --rss              maximum resident set size\n"
" -n, --nofile           maximum number of open files\n"
" -q, --msgqueue         maximum bytes in POSIX message queues\n"
" -r, --rtprio           maximum real-time scheduling priority\n"
" -s, --stack            maximum stack size\n"
" -t, --cpu              maximum amount of CPU time in seconds\n"
" -u, --nproc            maximum number of user processes\n"
" -v, --as               size of virtual memory\n"
" -x, --locks            maximum number of file locks\n"
" -y, --rttime           CPU time in microseconds a process scheduled\n"
"                        under real-time scheduling\n"
msgstr ""
" -c, --core             创建核心文件的最大尺寸\n"
" -d, --data             进程数据段的最大尺寸\n"
" -e, --nice             允许提升的最大 nice 优先级\n"
" -f, --fsize            进程写文件的最大尺寸\n"
" -i, --sigpending       挂起(pending)信号的最大数量\n"
" -l, --memlock          内存中进程锁的最大数量\n"
" -m, --rss              (内存虚拟页)驻留集的最大数量\n"
" -n, --nofile           打开文件的最大数量\n"
" -q, --msgqueue         POSIX 消息队列的最大字节数\n"
" -r, --rtprio           最大实时调度优先级\n"
" -s, --stack            最大栈(stack)尺寸\n"
" -t, --cpu              最长 CPU 时间(秒)\n"
" -u, --nproc            最多用户进程数量\n"
" -v, --as               虚拟内存大小\n"
" -x, --locks            文件锁的最大数量\n"
" -y, --rttime           实时调度时进程调度的 CPU\n"
"                        (间隔)时间(毫秒)\n"

#: sys-utils/prlimit.c:205
msgid ""
" <limit> is defined as a range soft:hard, soft:, :hard or a value to\n"
"         define both limits (e.g. -e=0:10 -r=:10).\n"
msgstr ""

#: sys-utils/prlimit.c:256 sys-utils/prlimit.c:262 sys-utils/prlimit.c:379
#: sys-utils/prlimit.c:384
msgid "unlimited"
msgstr "无限制"

#: sys-utils/prlimit.c:345
#, c-format
msgid "failed to get old %s limit"
msgstr "获取旧的 %s 限制失败"

#: sys-utils/prlimit.c:369
#, c-format
msgid "the soft limit %s cannot exceed the hard limit"
msgstr "软限制 %s 不能超过硬限制"

#: sys-utils/prlimit.c:376
#, c-format
msgid "New %s limit for pid %d: "
msgstr "pid %2$d 的新 %1$s 限制："

#: sys-utils/prlimit.c:391
#, c-format
msgid "failed to set the %s resource limit"
msgstr "设置 %s 资源限制失败"

#: sys-utils/prlimit.c:392
#, c-format
msgid "failed to get the %s resource limit"
msgstr "获取 %s 资源限制失败"

#: sys-utils/prlimit.c:474
#, c-format
msgid "failed to parse %s limit"
msgstr "解析 %s 限制失败"

#: sys-utils/prlimit.c:603
msgid "option --pid may be specified only once"
msgstr "--pid 选项只能指定一次"

#: sys-utils/prlimit.c:632
msgid "options --pid and COMMAND are mutually exclusive"
msgstr "--pid 和 命令 互相排斥"

#: sys-utils/readprofile.c:109
msgid "Display kernel profiling information.\n"
msgstr "显示内核分析信息。\n"

#: sys-utils/readprofile.c:113
#, c-format
msgid " -m, --mapfile <mapfile>   (defaults: \"%s\" and\n"
msgstr " -m, --mapfile <映射文件>  (默认：“%s”和\n"

#: sys-utils/readprofile.c:115
#, c-format
msgid "                                      \"%s\")\n"
msgstr "                                      “%s”)\n"

#: sys-utils/readprofile.c:117
#, c-format
msgid " -p, --profile <pro-file>  (default:  \"%s\")\n"
msgstr " -p, --profile <pro-file>  (默认：“%s”)\n"

#: sys-utils/readprofile.c:118
msgid " -M, --multiplier <mult>   set the profiling multiplier to <mult>\n"
msgstr " -M, --multiplier <乘数>   将性能测试乘数设置为<乘数>\n"

#: sys-utils/readprofile.c:119
msgid " -i, --info                print only info about the sampling step\n"
msgstr " -i, --info                只打印有关采样步骤(sampling step)的信息\n"

#: sys-utils/readprofile.c:120
msgid " -v, --verbose             print verbose data\n"
msgstr " -v, --verbose             打印详细信息\n"

#: sys-utils/readprofile.c:121
msgid " -a, --all                 print all symbols, even if count is 0\n"
msgstr " -a, --all                 打印所有符号，即使计数为 0\n"

#: sys-utils/readprofile.c:122
msgid " -b, --histbin             print individual histogram-bin counts\n"
msgstr " -b, --histbin             打印各个直方图区间的计数\n"

#: sys-utils/readprofile.c:123
msgid " -s, --counters            print individual counters within functions\n"
msgstr " -s, --counters            打印函数内的独立计数\n"

#: sys-utils/readprofile.c:124
msgid " -r, --reset               reset all the counters (root only)\n"
msgstr " -r, --reset               重置所有计数(限 root 用户)\n"

#: sys-utils/readprofile.c:125
msgid " -n, --no-auto             disable byte order auto-detection\n"
msgstr " -n, --no-auto             禁用字节顺序自动检测\n"

#: sys-utils/readprofile.c:204
#, fuzzy
#| msgid "failed to parse pid"
msgid "failed to parse multiplier"
msgstr "解析 pid 失败"

#: sys-utils/readprofile.c:242
#, c-format
msgid "error writing %s"
msgstr "写 %s 出错"

#: sys-utils/readprofile.c:253
msgid "input file is empty"
msgstr "输入文件为空"

#: sys-utils/readprofile.c:275
msgid "Assuming reversed byte order. Use -n to force native byte order."
msgstr "将假设为反向字节顺序。可使用 -n 强制为原生字节顺序。"

#: sys-utils/readprofile.c:290
#, c-format
msgid "Sampling_step: %u\n"
msgstr "采样步长：%u\n"

#: sys-utils/readprofile.c:306 sys-utils/readprofile.c:327
#, c-format
msgid "%s(%i): wrong map line"
msgstr "%s(%i)：错误的 map 行"

#: sys-utils/readprofile.c:317
#, c-format
msgid "can't find \"_stext\" in %s"
msgstr "在 %s 中找不到“_stext”"

#: sys-utils/readprofile.c:350
msgid "profile address out of range. Wrong map file?"
msgstr "配置(profile)地址超出范围。map 文件错误？"

#: sys-utils/readprofile.c:411
msgid "total"
msgstr "总计"

#: sys-utils/renice.c:52
msgid "process ID"
msgstr "进程 ID"

#: sys-utils/renice.c:53
msgid "process group ID"
msgstr "进程组 ID"

#: sys-utils/renice.c:62
#, fuzzy, c-format
#| msgid ""
#| " %1$s [-n] <priority> [-p|--pid] <pid>...\n"
#| " %1$s [-n] <priority>  -g|--pgrp <pgid>...\n"
#| " %1$s [-n] <priority>  -u|--user <user>...\n"
msgid ""
" %1$s [-n|--priority|--relative] <priority> [-p|--pid] <pid>...\n"
" %1$s [-n|--priority|--relative] <priority>  -g|--pgrp <pgid>...\n"
" %1$s [-n|--priority|--relative] <priority>  -u|--user <user>...\n"
msgstr ""
" %1$s [-n] <优先级> [-p|--pid] <pid>...\n"
" %1$s [-n] <优先级>  -g|--pgrp <pgid>...\n"
" %1$s [-n] <优先级>  -u|--user <用户>...\n"

#: sys-utils/renice.c:68
msgid "Alter the priority of running processes.\n"
msgstr "改变运行进程的优先级。 \n"

#: sys-utils/renice.c:71
#, fuzzy
#| msgid " -n, --priority <num>   specify the nice increment value\n"
msgid " -n <num>               specify the nice value\n"
msgstr " -n, --priority <数字>  指定 nice 增量\n"

#: sys-utils/renice.c:72
#, fuzzy
#| msgid "                               set vesa powersaving features\n"
msgid "                          If POSIXLY_CORRECT flag is set in environment\n"
msgstr "                               设置 vesa 节能功能\n"

#: sys-utils/renice.c:73
#, fuzzy
#| msgid "                               set vesa powersaving features\n"
msgid "                          then the priority is 'relative' to current\n"
msgstr "                               设置 vesa 节能功能\n"

#: sys-utils/renice.c:74
#, fuzzy
#| msgid " --store                           save current terminal settings as default\n"
msgid "                          process priority. Otherwise it is 'absolute'.\n"
msgstr " --store                           将当前终端设置保存为默认值\n"

#: sys-utils/renice.c:75
#, fuzzy
#| msgid " -n, --priority <num>   specify the nice increment value\n"
msgid " --priority <num>       specify the 'absolute' nice value\n"
msgstr " -n, --priority <数字>  指定 nice 增量\n"

#: sys-utils/renice.c:76
#, fuzzy
#| msgid " -n, --priority <num>   specify the nice increment value\n"
msgid " --relative <num>       specify the 'relative' nice value\n"
msgstr " -n, --priority <数字>  指定 nice 增量\n"

#: sys-utils/renice.c:77
#, fuzzy
#| msgid " -p, --pid <id>         interpret argument as process ID (default)\n"
msgid " -p, --pid              interpret arguments as process ID (default)\n"
msgstr " -p, --pid <id>         将参数解释为进程 ID (默认)\n"

#: sys-utils/renice.c:78
#, fuzzy
#| msgid " -g, --pgrp <id>        interpret argument as process group ID\n"
msgid " -g, --pgrp             interpret arguments as process group ID\n"
msgstr " -g, --pgrp <id>        将参数解释为进程组 ID\n"

#: sys-utils/renice.c:79
#, fuzzy
#| msgid " -u, --user <name>|<id> interpret argument as username or user ID\n"
msgid " -u, --user             interpret arguments as username or user ID\n"
msgstr " -u, --user <name>|<id> 将参数解释为 用户名 或 用户 ID\n"

#: sys-utils/renice.c:91
#, c-format
msgid "failed to get priority for %d (%s)"
msgstr "获取 %d (%s) 的优先级失败"

#: sys-utils/renice.c:110
#, c-format
msgid "failed to set priority for %d (%s)"
msgstr "设置 %d 的优先级失败(%s)"

#: sys-utils/renice.c:115
#, c-format
msgid "%d (%s) old priority %d, new priority %d\n"
msgstr "%d (%s) 旧优先级为 %d，新优先级为 %d\n"

#: sys-utils/renice.c:181
#, c-format
msgid "invalid priority '%s'"
msgstr "无效的优先级“%s”"

#: sys-utils/renice.c:208
#, c-format
msgid "unknown user %s"
msgstr "未知用户 %s"

#. TRANSLATORS: The first %s is one of the above
#. * three ID names. Read: "bad value for %s: %s"
#: sys-utils/renice.c:217
#, c-format
msgid "bad %s value: %s"
msgstr "错误的 %s 值：%s"

#: sys-utils/rfkill.c:131
msgid "kernel device name"
msgstr "内核设备名称"

#: sys-utils/rfkill.c:132
msgid "device identifier value"
msgstr "设备标识符值"

#: sys-utils/rfkill.c:133
msgid "device type name that can be used as identifier"
msgstr ""

#: sys-utils/rfkill.c:134
msgid "device type description"
msgstr "设备类型描述"

#: sys-utils/rfkill.c:135
#, fuzzy
#| msgid "size of the lock"
msgid "status of software block"
msgstr "锁的大小"

#: sys-utils/rfkill.c:136
#, fuzzy
#| msgid "Show the status of the hardware watchdog.\n"
msgid "status of hardware block"
msgstr "显示硬件看门狗的状态。\n"

#: sys-utils/rfkill.c:200
#, fuzzy, c-format
#| msgid "cannot lock %s"
msgid "cannot set non-blocking %s"
msgstr "无法锁定 %s"

#: sys-utils/rfkill.c:221
#, c-format
msgid "wrong size of rfkill event: %zu < %zu"
msgstr ""

#: sys-utils/rfkill.c:259
#, fuzzy, c-format
#| msgid "failed to parse %s"
msgid "failed to poll %s"
msgstr "解析 %s 失败"

#: sys-utils/rfkill.c:328
msgid "invalid identifier"
msgstr "无效的标识符"

#: sys-utils/rfkill.c:408 sys-utils/rfkill.c:411
#, fuzzy
#| msgid "locked"
msgid "blocked"
msgstr "已锁定"

#: sys-utils/rfkill.c:408 sys-utils/rfkill.c:411
#, fuzzy
#| msgid "locked"
msgid "unblocked"
msgstr "已锁定"

#: sys-utils/rfkill.c:430 sys-utils/rfkill.c:505 sys-utils/rfkill.c:546
#: sys-utils/rfkill.c:582 sys-utils/rfkill.c:603
#, c-format
msgid "invalid identifier: %s"
msgstr "无效的标识符：%s"

#: sys-utils/rfkill.c:633
#, fuzzy, c-format
#| msgid " %s [options] [<device> ...]\n"
msgid " %s [options] command [identifier ...]\n"
msgstr " %s [选项] [<设备> ...]\n"

#: sys-utils/rfkill.c:636
msgid "Tool for enabling and disabling wireless devices.\n"
msgstr ""

#. TRANSLATORS: command names should not be translated, explaining
#. them as additional field after identifier is fine, for example
#. *
#. list   [identifier]   (lista [tarkenne])
#.
#: sys-utils/rfkill.c:660
#, fuzzy
#| msgid " -help\n"
msgid " help\n"
msgstr " -help\n"

#: sys-utils/rfkill.c:661
msgid " event\n"
msgstr ""

#: sys-utils/rfkill.c:662
#, fuzzy
#| msgid "Disk identifier"
msgid " list   [identifier]\n"
msgstr "磁盘标识符"

#: sys-utils/rfkill.c:663
#, fuzzy
#| msgid "Disk identifier"
msgid " block   identifier\n"
msgstr "磁盘标识符"

#: sys-utils/rfkill.c:664
#, fuzzy
#| msgid "Disk identifier"
msgid " unblock identifier\n"
msgstr "磁盘标识符"

#: sys-utils/rfkill.c:665
#, fuzzy
#| msgid "Disk identifier"
msgid " toggle  identifier\n"
msgstr "磁盘标识符"

#: sys-utils/rtcwake.c:102
msgid "Enter a system sleep state until a specified wakeup time.\n"
msgstr "进入系统睡眠状态，直到指定的唤醒时间。\n"

#: sys-utils/rtcwake.c:105
msgid " -a, --auto               reads the clock mode from adjust file (default)\n"
msgstr " -a, --auto               从 adjust 文件读取时钟模式(默认)\n"

#: sys-utils/rtcwake.c:107
#, c-format
msgid ""
" -A, --adjfile <file>     specifies the path to the adjust file\n"
"                            the default is %s\n"
msgstr ""
" -A, --adjfile <文件>     指定 adjust 文件的路径\n"
"                            默认为 %s\n"

#: sys-utils/rtcwake.c:109
msgid "     --date <timestamp>   date time of timestamp to wake\n"
msgstr "     --date <时间戳>      唤醒时间戳的日期时间\n"

#: sys-utils/rtcwake.c:110
msgid " -d, --device <device>    select rtc device (rtc0|rtc1|...)\n"
msgstr " -d, --device <设备>      选择 rtc 设备(rtc0|rtc1|...)\n"

#: sys-utils/rtcwake.c:111
msgid " -n, --dry-run            does everything, but suspend\n"
msgstr " -n, --dry-run            演示操作但不执行(suspend)\n"

#: sys-utils/rtcwake.c:112
msgid " -l, --local              RTC uses local timezone\n"
msgstr " -l, --local              RTC 使用本地时区\n"

#: sys-utils/rtcwake.c:113
msgid "     --list-modes         list available modes\n"
msgstr "     --list-modes         列出可用模式\n"

#: sys-utils/rtcwake.c:114
msgid " -m, --mode <mode>        standby|mem|... sleep mode\n"
msgstr " -m, --mode <模式>        指定 standby|mem|... 等睡眠模式\n"

#: sys-utils/rtcwake.c:115
msgid " -s, --seconds <seconds>  seconds to sleep\n"
msgstr " -s, --seconds <秒数>     指定睡眠的秒数\n"

#: sys-utils/rtcwake.c:116
msgid " -t, --time <time_t>      time to wake\n"
msgstr " -t, --time <time_t>      指定唤醒时刻\n"

#: sys-utils/rtcwake.c:117
msgid " -u, --utc                RTC uses UTC\n"
msgstr " -u, --utc                RTC 使用 UTC\n"

#: sys-utils/rtcwake.c:118
msgid " -v, --verbose            verbose messages\n"
msgstr " -v, --verbose            输出详尽消息\n"

#: sys-utils/rtcwake.c:168
msgid "read rtc time failed"
msgstr "读取 rtc 时间失败"

#: sys-utils/rtcwake.c:174
msgid "read system time failed"
msgstr "读取系统时间失败"

#: sys-utils/rtcwake.c:190
msgid "convert rtc time failed"
msgstr "转换 rtc 时间失败"

#: sys-utils/rtcwake.c:240
msgid "set rtc wake alarm failed"
msgstr "设置 rtc 唤醒闹钟失败"

#: sys-utils/rtcwake.c:280
msgid "discarding stdin"
msgstr "丢弃标准输入"

#: sys-utils/rtcwake.c:331
#, c-format
msgid "unexpected third line in: %s: %s"
msgstr "第 3 行异常：%s：%s"

#: sys-utils/rtcwake.c:345 sys-utils/rtcwake.c:675
msgid "read rtc alarm failed"
msgstr "读取 rtc 闹钟失败"

#: sys-utils/rtcwake.c:350
#, c-format
msgid "alarm: off\n"
msgstr "闹钟：关\n"

#: sys-utils/rtcwake.c:363
msgid "convert time failed"
msgstr "转换时间失败"

#: sys-utils/rtcwake.c:369
#, c-format
msgid "alarm: on  %s"
msgstr "闹钟：于  %s"

#: sys-utils/rtcwake.c:402
#, c-format
msgid "%s: unable to find device"
msgstr "%s：找不到设备"

#: sys-utils/rtcwake.c:413
#, c-format
msgid "could not read: %s"
msgstr "无法读取︰%s"

#: sys-utils/rtcwake.c:493
#, c-format
msgid "unrecognized suspend state '%s'"
msgstr "不支持的挂起状态“%s”"

#: sys-utils/rtcwake.c:501
msgid "invalid seconds argument"
msgstr "无效的 秒数 参数"

#: sys-utils/rtcwake.c:505
msgid "invalid time argument"
msgstr "无效的 时间 参数"

#: sys-utils/rtcwake.c:532
#, c-format
msgid "%s: assuming RTC uses UTC ...\n"
msgstr "%s：将假设 RTC 使用 UTC...\n"

#: sys-utils/rtcwake.c:537
msgid "Using UTC time.\n"
msgstr "使用 UTC 时间。\n"

#: sys-utils/rtcwake.c:538
msgid "Using local time.\n"
msgstr "使用当地时间。\n"

#: sys-utils/rtcwake.c:541
msgid "must provide wake time (see --seconds, --time and --date options)"
msgstr "必须提供唤醒时间(见 --seconds, --time 和 --date 选项)"

#: sys-utils/rtcwake.c:547
#, c-format
msgid "%s not enabled for wakeup events"
msgstr "%s 没有为唤醒事件启用"

#: sys-utils/rtcwake.c:554
#, fuzzy, c-format
#| msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
msgid "alarm %<PRId64>, sys_time %<PRId64>, rtc_time %<PRId64>, seconds %<PRIu64>\n"
msgstr "闹钟 %ld，sys 时间 %ld，rtc 时间 %ld，秒数 %u\n"

#: sys-utils/rtcwake.c:567
#, c-format
msgid "time doesn't go backward to %s"
msgstr "时间不能返回到 %s"

#: sys-utils/rtcwake.c:580
#, c-format
msgid "%s: wakeup using %s at %s"
msgstr "%1$s：用 %3$s 的 %2$s 唤醒"

#: sys-utils/rtcwake.c:586
#, c-format
msgid "%s: wakeup from \"%s\" using %s at %s"
msgstr "%s：从“%s”唤醒，使用 %s，时间 %s"

#: sys-utils/rtcwake.c:596
#, c-format
msgid "suspend mode: no; leaving\n"
msgstr "挂起模式：无；将离开\n"

#: sys-utils/rtcwake.c:619
#, c-format
msgid "suspend mode: off; executing %s\n"
msgstr "挂起模式：关；正在执行 %s\n"

#: sys-utils/rtcwake.c:628
msgid "failed to find shutdown command"
msgstr "无法找到 shutdown 命令"

#: sys-utils/rtcwake.c:638
#, c-format
msgid "suspend mode: on; reading rtc\n"
msgstr "挂起模式：开；正在读 rtc\n"

#: sys-utils/rtcwake.c:643
msgid "rtc read failed"
msgstr "读 rtc 失败"

#: sys-utils/rtcwake.c:655
#, c-format
msgid "suspend mode: disable; disabling alarm\n"
msgstr "挂起模式：禁用；正在禁用闹钟\n"

#: sys-utils/rtcwake.c:659
#, c-format
msgid "suspend mode: show; printing alarm info\n"
msgstr "挂起模式：显示；正在打印闹钟信息\n"

#: sys-utils/rtcwake.c:666
#, c-format
msgid "suspend mode: %s; suspending system\n"
msgstr "挂起模式：%s；正在挂起系统\n"

#: sys-utils/rtcwake.c:680
msgid "disable rtc alarm interrupt failed"
msgstr "禁用 rtc 闹钟中断失败"

#: sys-utils/setarch.c:50
#, c-format
msgid "Switching on %s.\n"
msgstr "正在打开 %s。\n"

#: sys-utils/setarch.c:137
#, c-format
msgid " %s [<arch>] [options] [<program> [<argument>...]]\n"
msgstr " %s [<架构>] [选项] [<程序> [<参数>...]]\n"

#: sys-utils/setarch.c:142
msgid "Change the reported architecture and set personality flags.\n"
msgstr "更改报告的架构并设置人格标志(personality flag) 。\n"

#: sys-utils/setarch.c:145
msgid " -B, --32bit              turns on ADDR_LIMIT_32BIT\n"
msgstr " -B, --32bit              开启 ADDR_LIMIT_32BIT\n"

#: sys-utils/setarch.c:146
msgid " -F, --fdpic-funcptrs     makes function pointers point to descriptors\n"
msgstr " -F, --fdpic-funcptrs     将程序指针指向描述符\n"

#: sys-utils/setarch.c:147
msgid " -I, --short-inode        turns on SHORT_INODE\n"
msgstr " -I, --short-inode        开启 SHORT_INODE\n"

#: sys-utils/setarch.c:148
msgid " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
msgstr " -L, --addr-compat-layout 更改虚拟内存分配的方式\n"

#: sys-utils/setarch.c:149
msgid " -R, --addr-no-randomize  disables randomization of the virtual address space\n"
msgstr " -R, --addr-no-randomize  禁止随机化虚拟地址空间\n"

#: sys-utils/setarch.c:150
msgid " -S, --whole-seconds      turns on WHOLE_SECONDS\n"
msgstr " -S, --whole-seconds      开启 WHOLE_SECONDS\n"

#: sys-utils/setarch.c:151
msgid " -T, --sticky-timeouts    turns on STICKY_TIMEOUTS\n"
msgstr " -T, --sticky-timeouts    开启 STICKY_TIMEOUTS\n"

#: sys-utils/setarch.c:152
msgid " -X, --read-implies-exec  turns on READ_IMPLIES_EXEC\n"
msgstr " -X, --read-implies-exec  开启 READ_IMPLIES_EXEC\n"

#: sys-utils/setarch.c:153
msgid " -Z, --mmap-page-zero     turns on MMAP_PAGE_ZERO\n"
msgstr " -Z, --mmap-page-zero     开启 MMAP_PAGE_ZERO\n"

#: sys-utils/setarch.c:154
msgid " -3, --3gb                limits the used address space to a maximum of 3 GB\n"
msgstr " -3, --3gb                将用户地址空间限制为最多 3 GB\n"

#: sys-utils/setarch.c:155
msgid "     --4gb                ignored (for backward compatibility only)\n"
msgstr "     --4gb                忽略(纯为兼容)\n"

#: sys-utils/setarch.c:156
msgid "     --uname-2.6          turns on UNAME26\n"
msgstr "     --uname-2.6          开启 UNAME26\n"

#: sys-utils/setarch.c:157
msgid " -v, --verbose            say what options are being switched on\n"
msgstr " -v, --verbose            告知打开了哪些选项\n"

#: sys-utils/setarch.c:160
msgid "     --list               list settable architectures, and exit\n"
msgstr "     --list               列出可设置的架构并退出\n"

#: sys-utils/setarch.c:161
msgid "     --show[=personality] show current or specific personality and exit\n"
msgstr ""

#: sys-utils/setarch.c:341
#, c-format
msgid "Kernel cannot set architecture to %s"
msgstr "内核不能设置为 %s 的架构"

#: sys-utils/setarch.c:406
msgid "Can not get current kernel personality"
msgstr ""

#: sys-utils/setarch.c:459
msgid "Not enough arguments"
msgstr "参数不够"

#: sys-utils/setarch.c:527
msgid "unrecognized option '--list'"
msgstr "无法识别的“--list”选项"

#: sys-utils/setarch.c:536
#, fuzzy
#| msgid "mount ID"
msgid "could not parse personality"
msgstr "挂载 ID"

#: sys-utils/setarch.c:540
#, fuzzy
#| msgid "unrecognized option '--list'"
msgid "unrecognized option '--show'"
msgstr "无法识别的“--list”选项"

#: sys-utils/setarch.c:554
#, fuzzy
msgid "no architecture argument or personality flags specified"
msgstr "未指定架构参数"

#: sys-utils/setarch.c:566
#, c-format
msgid "%s: Unrecognized architecture"
msgstr "%s：未识别的架构"

#: sys-utils/setarch.c:584
#, c-format
msgid "failed to set personality to %s"
msgstr "无法将人格(personality)设置为 %s"

#: sys-utils/setarch.c:596
#, c-format
msgid "Execute command `%s'.\n"
msgstr "执行命令“%s”。\n"

#: sys-utils/setpriv.c:119
#, c-format
msgid " %s [options] <program> [<argument>...]\n"
msgstr " %s [选项] <程序> [<参数>...]\n"

#: sys-utils/setpriv.c:123
msgid "Run a program with different privilege settings.\n"
msgstr "以不同的权限设置运行程序。\n"

#: sys-utils/setpriv.c:126
#, fuzzy
#| msgid " -d, --dump               show current state (and do not exec anything)\n"
msgid " -d, --dump                  show current state (and do not exec)\n"
msgstr " -d, --dump               显示当前状态(不执行任何操作)\n"

#: sys-utils/setpriv.c:127
#, fuzzy
#| msgid " --nnp, --no-new-privs    disallow granting new privileges\n"
msgid " --nnp, --no-new-privs       disallow granting new privileges\n"
msgstr " --nnp, --no-new-privs    禁止赋予新权限\n"

#: sys-utils/setpriv.c:128
#, fuzzy
#| msgid " --inh-caps <caps,...>    set inheritable capabilities\n"
msgid " --ambient-caps <caps,...>   set ambient capabilities\n"
msgstr " --inh-caps <caps,...>    设置可继承的权能\n"

#: sys-utils/setpriv.c:129
#, fuzzy
#| msgid " --inh-caps <caps,...>    set inheritable capabilities\n"
msgid " --inh-caps <caps,...>       set inheritable capabilities\n"
msgstr " --inh-caps <caps,...>    设置可继承的权能\n"

#: sys-utils/setpriv.c:130
#, fuzzy
#| msgid " --bounding-set <caps>    set capability bounding set\n"
msgid " --bounding-set <caps>       set capability bounding set\n"
msgstr " --bounding-set <caps>    设置权能绑定集\n"

#: sys-utils/setpriv.c:131
#, fuzzy
#| msgid " --ruid <uid>             set real uid\n"
msgid " --ruid <uid|user>           set real uid\n"
msgstr " --ruid <uid>             设置实际 uid\n"

#: sys-utils/setpriv.c:132
#, fuzzy
#| msgid " --euid <uid>             set effective uid\n"
msgid " --euid <uid|user>           set effective uid\n"
msgstr " --euid <uid>             设置有效 uid\n"

#: sys-utils/setpriv.c:133
#, fuzzy
#| msgid " --rgid <gid>             set real gid\n"
msgid " --rgid <gid|user>           set real gid\n"
msgstr " --rgid <gid>             设置实际 gid\n"

#: sys-utils/setpriv.c:134
#, fuzzy
#| msgid " --egid <gid>             set effective gid\n"
msgid " --egid <gid|group>          set effective gid\n"
msgstr " --egid <gid>             设置有效 gid\n"

#: sys-utils/setpriv.c:135
#, fuzzy
#| msgid " --reuid <uid>            set real and effective uid\n"
msgid " --reuid <uid|user>          set real and effective uid\n"
msgstr " --reuid <uid>            设置实际和有效 uid\n"

#: sys-utils/setpriv.c:136
#, fuzzy
#| msgid " --regid <gid>            set real and effective gid\n"
msgid " --regid <gid|group>         set real and effective gid\n"
msgstr " --regid <gid>            设置实际和有效 gid\n"

#: sys-utils/setpriv.c:137
#, fuzzy
#| msgid " --clear-groups           clear supplementary groups\n"
msgid " --clear-groups              clear supplementary groups\n"
msgstr " --clear-groups           清除附属组\n"

#: sys-utils/setpriv.c:138
#, fuzzy
#| msgid " --keep-groups            keep supplementary groups\n"
msgid " --keep-groups               keep supplementary groups\n"
msgstr " --keep-groups            保留附属组\n"

#: sys-utils/setpriv.c:139
#, fuzzy
#| msgid " --keep-groups            keep supplementary groups\n"
msgid " --init-groups               initialize supplementary groups\n"
msgstr " --keep-groups            保留附属组\n"

#: sys-utils/setpriv.c:140
#, fuzzy
#| msgid " --groups <group,...>     set supplementary groups\n"
msgid " --groups <group,...>        set supplementary groups by UID or name\n"
msgstr " --groups <组,...>        设置附属组\n"

#: sys-utils/setpriv.c:141
#, fuzzy
#| msgid " --securebits <bits>      set securebits\n"
msgid " --securebits <bits>         set securebits\n"
msgstr " --securebits <位>        设置安全位\n"

#: sys-utils/setpriv.c:142
#, fuzzy
#| msgid " --store                           save current terminal settings as default\n"
msgid ""
" --pdeathsig keep|clear|<signame>\n"
"                             set or clear parent death signal\n"
msgstr " --store                           将当前终端设置保存为默认值\n"

#: sys-utils/setpriv.c:144
#, fuzzy
#| msgid " --selinux-label <label>  set SELinux label\n"
msgid " --selinux-label <label>     set SELinux label\n"
msgstr " --selinux-label <标签>  设置 SELinux 标签\n"

#: sys-utils/setpriv.c:145
#, fuzzy
#| msgid " --apparmor-profile <pr>  set AppArmor profile\n"
msgid " --apparmor-profile <pr>     set AppArmor profile\n"
msgstr " --apparmor-profile <pr>  设置 AppArmor 配置文件\n"

#: sys-utils/setpriv.c:146
msgid ""
" --reset-env                 clear all environment and initialize\n"
"                               HOME, SHELL, USER, LOGNAME and PATH\n"
msgstr ""

#: sys-utils/setpriv.c:152
msgid " This tool can be dangerous.  Read the manpage, and be careful.\n"
msgstr "运行此工具有风险。请阅读 man 手册，谨慎操作。\n"

#: sys-utils/setpriv.c:170
msgid "invalid capability type"
msgstr "无效的权能类型"

#: sys-utils/setpriv.c:193 sys-utils/setpriv.c:412
#, c-format
msgid "cap %d: libcap-ng is broken"
msgstr "权能 %d：libcap-ng 损坏"

#: sys-utils/setpriv.c:219 sys-utils/setpriv.c:560
msgid "getting process secure bits failed"
msgstr "获取进程安全位失败"

#: sys-utils/setpriv.c:223
#, c-format
msgid "Securebits: "
msgstr "安全位："

#: sys-utils/setpriv.c:243 sys-utils/setpriv.c:327
#, c-format
msgid "[none]\n"
msgstr "[无]\n"

#: sys-utils/setpriv.c:269
#, c-format
msgid "%s: too long"
msgstr "%s：过长"

#: sys-utils/setpriv.c:297
#, c-format
msgid "Supplementary groups: "
msgstr "附属组："

#: sys-utils/setpriv.c:299 sys-utils/setpriv.c:365 sys-utils/setpriv.c:370
#: sys-utils/setpriv.c:376 sys-utils/setpriv.c:382 sys-utils/setpriv.c:389
#, c-format
msgid "[none]"
msgstr "[无]"

#: sys-utils/setpriv.c:317
msgid "get pdeathsig failed"
msgstr "获取 pdeathsig 失败"

#: sys-utils/setpriv.c:321
#, fuzzy, c-format
#| msgid "set parent death signal failed"
msgid "Parent death signal: "
msgstr "设置父进程死亡信号失败"

#: sys-utils/setpriv.c:337
#, c-format
msgid "uid: %u\n"
msgstr "uid：%u\n"

#: sys-utils/setpriv.c:338
#, c-format
msgid "euid: %u\n"
msgstr "euid：%u\n"

#: sys-utils/setpriv.c:341
#, c-format
msgid "suid: %u\n"
msgstr "suid：%u\n"

#: sys-utils/setpriv.c:343 sys-utils/setpriv.c:456
msgid "getresuid failed"
msgstr "getresuid 失败"

#: sys-utils/setpriv.c:352 sys-utils/setpriv.c:471
msgid "getresgid failed"
msgstr "getresgid 失败"

#: sys-utils/setpriv.c:363
#, c-format
msgid "Effective capabilities: "
msgstr "有效权能："

#: sys-utils/setpriv.c:368
#, c-format
msgid "Permitted capabilities: "
msgstr "允许的权能："

#: sys-utils/setpriv.c:374
#, c-format
msgid "Inheritable capabilities: "
msgstr "可继承的权能："

#: sys-utils/setpriv.c:379
#, fuzzy, c-format
#| msgid "Permitted capabilities: "
msgid "Ambient capabilities: "
msgstr "允许的权能："

#: sys-utils/setpriv.c:384
#, c-format
msgid "[unsupported]"
msgstr "[不支持]"

#: sys-utils/setpriv.c:387
#, c-format
msgid "Capability bounding set: "
msgstr "权能绑定集："

#: sys-utils/setpriv.c:396
msgid "SELinux label"
msgstr "SELinux 标签"

#: sys-utils/setpriv.c:399
msgid "AppArmor profile"
msgstr "AppArmor 配置文件"

#: sys-utils/setpriv.c:434
msgid "Invalid supplementary group id"
msgstr "无效的附属组 id"

#: sys-utils/setpriv.c:444
msgid "failed to get parent death signal"
msgstr "获取父进程死亡信号失败"

#: sys-utils/setpriv.c:464
msgid "setresuid failed"
msgstr "setresuid 失败"

#: sys-utils/setpriv.c:479
msgid "setresgid failed"
msgstr "setresgid 失败"

#: sys-utils/setpriv.c:511
msgid "unsupported capability type"
msgstr "不支持的权能类型"

#: sys-utils/setpriv.c:528
msgid "bad capability string"
msgstr "错误的权能字符串"

#: sys-utils/setpriv.c:545
#, c-format
msgid "unknown capability \"%s\""
msgstr "未知权能“%s”"

#: sys-utils/setpriv.c:569
msgid "unrecognized securebit set -- refusing to adjust"
msgstr "无法识别的安全位集 -- 拒绝调整"

#: sys-utils/setpriv.c:573
msgid "bad securebits string"
msgstr "安全位字符串有误"

#: sys-utils/setpriv.c:580
msgid "+all securebits is not allowed"
msgstr "+all 安全位是不允许的"

#: sys-utils/setpriv.c:593
msgid "adjusting keep_caps does not make sense"
msgstr "调整 keep_caps(保持权能) 没有意义"

#: sys-utils/setpriv.c:597
msgid "unrecognized securebit"
msgstr "无法识别的安全位"

#: sys-utils/setpriv.c:617
msgid "SELinux is not running"
msgstr "SELinux 没有运行"

#: sys-utils/setpriv.c:632
#, c-format
msgid "close failed: %s"
msgstr "关闭失败：%s"

#: sys-utils/setpriv.c:640
msgid "AppArmor is not running"
msgstr "AppArmor 没有运行"

#: sys-utils/setpriv.c:819
msgid "duplicate --no-new-privs option"
msgstr "复制 --no-new-privs 选项"

#: sys-utils/setpriv.c:824
msgid "duplicate ruid"
msgstr "复制 ruid"

#: sys-utils/setpriv.c:826
msgid "failed to parse ruid"
msgstr "解析 ruid 失败"

#: sys-utils/setpriv.c:834
msgid "duplicate euid"
msgstr "复制 euid"

#: sys-utils/setpriv.c:836
msgid "failed to parse euid"
msgstr "解析 euid 失败"

#: sys-utils/setpriv.c:840
msgid "duplicate ruid or euid"
msgstr "复制 ruid 或 euid"

#: sys-utils/setpriv.c:842
msgid "failed to parse reuid"
msgstr "解析 reuid 失败"

#: sys-utils/setpriv.c:851
msgid "duplicate rgid"
msgstr "复制 rgid"

#: sys-utils/setpriv.c:853
msgid "failed to parse rgid"
msgstr "解析 rgid 失败"

#: sys-utils/setpriv.c:857
msgid "duplicate egid"
msgstr "复制 egid"

#: sys-utils/setpriv.c:859
msgid "failed to parse egid"
msgstr "解析 egid 失败"

#: sys-utils/setpriv.c:863
msgid "duplicate rgid or egid"
msgstr "复制 rgid 或 egid"

#: sys-utils/setpriv.c:865
msgid "failed to parse regid"
msgstr "解析 regid 失败"

#: sys-utils/setpriv.c:870
msgid "duplicate --clear-groups option"
msgstr "复制  --clear-groups 选项"

#: sys-utils/setpriv.c:876
msgid "duplicate --keep-groups option"
msgstr "复制 --keep-groups 选项"

#: sys-utils/setpriv.c:882
msgid "duplicate --init-groups option"
msgstr "复制 --init-groups 选项"

#: sys-utils/setpriv.c:888
msgid "duplicate --groups option"
msgstr "复制 --groups 选项"

#: sys-utils/setpriv.c:894
msgid "duplicate --keep-pdeathsig option"
msgstr "复制 --keep-pdeathsig 选项"

#: sys-utils/setpriv.c:903
msgid "duplicate --inh-caps option"
msgstr "复制 --inh-caps 选项"

#: sys-utils/setpriv.c:909
msgid "duplicate --ambient-caps option"
msgstr "复制 --ambient-caps 选项"

#: sys-utils/setpriv.c:915
msgid "duplicate --bounding-set option"
msgstr "复制 --bounding-set 选项"

#: sys-utils/setpriv.c:921
msgid "duplicate --securebits option"
msgstr "复制 --securebits 选项"

#: sys-utils/setpriv.c:927
msgid "duplicate --selinux-label option"
msgstr "复制 --selinux-label 选项"

#: sys-utils/setpriv.c:933
msgid "duplicate --apparmor-profile option"
msgstr "复制 --apparmor-profile 选项"

#: sys-utils/setpriv.c:952
msgid "--dump is incompatible with all other options"
msgstr "--dump 与其他所有选项不兼容"

#: sys-utils/setpriv.c:960
msgid "--list-caps must be specified alone"
msgstr "--list-caps 必须作为单独选项指定"

#: sys-utils/setpriv.c:966
msgid "No program specified"
msgstr "未指定程序"

#: sys-utils/setpriv.c:972
#, fuzzy
#| msgid "--[re]gid requires --keep-groups, --clear-groups, or --groups"
msgid "--[re]gid requires --keep-groups, --clear-groups, --init-groups, or --groups"
msgstr "--[re]gid 需要 --keep-groups、--clear-groups 或 --groups"

#: sys-utils/setpriv.c:976
msgid "--init-groups requires --ruid or --reuid"
msgstr "--init-groups 需要 --ruid 或者 --reuid"

#: sys-utils/setpriv.c:980
#, c-format
msgid "uid %ld not found, --init-groups requires an user that can be found on the system"
msgstr ""

#: sys-utils/setpriv.c:995
msgid "disallow granting new privileges failed"
msgstr "禁止赋予新权限失败"

#: sys-utils/setpriv.c:1003
msgid "keep process capabilities failed"
msgstr "保持进程权能失败"

#: sys-utils/setpriv.c:1011
msgid "activate capabilities"
msgstr "激活权能"

#: sys-utils/setpriv.c:1017
msgid "reactivate capabilities"
msgstr "重新激活权能"

#: sys-utils/setpriv.c:1028
msgid "initgroups failed"
msgstr "initgroups 失败"

#: sys-utils/setpriv.c:1036
msgid "set process securebits failed"
msgstr "设置进程安全位失败"

#: sys-utils/setpriv.c:1042
msgid "apply bounding set"
msgstr "应用绑定集"

#: sys-utils/setpriv.c:1048
msgid "apply capabilities"
msgstr "应用权能"

#: sys-utils/setpriv.c:1057
msgid "set parent death signal failed"
msgstr "设置父进程死亡信号失败"

#: sys-utils/setsid.c:33
#, c-format
msgid " %s [options] <program> [arguments ...]\n"
msgstr " %s [选项] <程序> [参数 ...]\n"

#: sys-utils/setsid.c:37
msgid "Run a program in a new session.\n"
msgstr "在新会话中运行程序。\n"

#: sys-utils/setsid.c:40
msgid " -c, --ctty     set the controlling terminal to the current one\n"
msgstr " -c, --ctty     将控制终端设置为当前终端\n"

#: sys-utils/setsid.c:41
msgid " -f, --fork     always fork\n"
msgstr " -f, --fork     总是 fork\n"

#: sys-utils/setsid.c:42
msgid " -w, --wait     wait program to exit, and use the same return\n"
msgstr " -w, --wait     等待程序退出，并使用它的返回值\n"

#: sys-utils/setsid.c:100
msgid "fork"
msgstr "fork"

#: sys-utils/setsid.c:112
#, c-format
msgid "child %d did not exit normally"
msgstr "子 %d 未正常退出"

#: sys-utils/setsid.c:117
msgid "setsid failed"
msgstr "setsid 失败"

#: sys-utils/setsid.c:120
msgid "failed to set the controlling terminal"
msgstr "设置控制终端失败"

#: sys-utils/swapoff.c:94
#, c-format
msgid "swapoff %s\n"
msgstr "swapoff %s\n"

#: sys-utils/swapoff.c:114
msgid "Not superuser."
msgstr "非超级用户。"

#: sys-utils/swapoff.c:117 sys-utils/swapoff.c:122
#, c-format
msgid "%s: swapoff failed"
msgstr "%s：swapoff 失败"

#: sys-utils/swapoff.c:141 sys-utils/swapon.c:807
#, c-format
msgid " %s [options] [<spec>]\n"
msgstr " %s [选项] [<指定>]\n"

#: sys-utils/swapoff.c:144
msgid "Disable devices and files for paging and swapping.\n"
msgstr "禁止将设备和文件用于分页和交换。\n"

#: sys-utils/swapoff.c:147
msgid ""
" -a, --all              disable all swaps from /proc/swaps\n"
" -v, --verbose          verbose mode\n"
msgstr ""
" -a, --all              禁用 /proc/swaps 中的所有交换区\n"
" -v, --verbose          verbose mode\n"

#: sys-utils/swapoff.c:153
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             LABEL of device to be used\n"
" -U <uuid>              UUID of device to be used\n"
" LABEL=<label>          LABEL of device to be used\n"
" UUID=<uuid>            UUID of device to be used\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
msgstr ""
"\n"
" <指定>参数包括：\n"
" -L <标签>              要使用设备的标签\n"
" -U <uuid>              要使用设备的 UUID\n"
" LABEL=<标签>           要使用设备的标签\n"
" UUID=<uuid>            要使用设备的 UUID\n"
" <设备>                 要使用设备的名称\n"
" <文件>                 要使用文件的名称\n"

#: sys-utils/swapon.c:96
msgid "device file or partition path"
msgstr "设备文件或分区路径"

#: sys-utils/swapon.c:97
msgid "type of the device"
msgstr "设备的类型"

#: sys-utils/swapon.c:98
msgid "size of the swap area"
msgstr "交换区大小"

#: sys-utils/swapon.c:99
msgid "bytes in use"
msgstr "已使用字节数"

#: sys-utils/swapon.c:100
msgid "swap priority"
msgstr "交换优先级"

#: sys-utils/swapon.c:101
msgid "swap uuid"
msgstr "swap uuid"

#: sys-utils/swapon.c:102
msgid "swap label"
msgstr "swap 标签"

#. TRANSLATORS: The tabs make each field a multiple of 8 characters. Keep aligned with each entry below.
#: sys-utils/swapon.c:250
#, fuzzy, c-format
#| msgid "%s\t\t\t\tType\t\tSize\tUsed\tPriority\n"
msgid "Filename\t\t\t\tType\t\tSize\t\tUsed\t\tPriority\n"
msgstr "%s\t\t\t\t类型\t\t大小\t已用\t权限\n"

#: sys-utils/swapon.c:328
#, c-format
msgid "%s: reinitializing the swap."
msgstr "%s：正在重新初始化交换区。"

#: sys-utils/swapon.c:387
#, c-format
msgid "%s: lseek failed"
msgstr "%s：lseek 失败"

#: sys-utils/swapon.c:393
#, c-format
msgid "%s: write signature failed"
msgstr "%s：写签名失败"

#: sys-utils/swapon.c:536
#, c-format
msgid "%s: insecure permissions %04o, %04o suggested."
msgstr "%s：不安全的权限 %04o，建议使用 %04o。"

#: sys-utils/swapon.c:541
#, c-format
msgid "%s: insecure file owner %d, 0 (root) suggested."
msgstr "%s：不安全的文件拥有者 %d，建议使用 0(root)。"

#: sys-utils/swapon.c:547
#, c-format
msgid "%s: skipping - it appears to have holes."
msgstr "%s：将跳过 - 它似乎有空洞。"

#: sys-utils/swapon.c:555
#, c-format
msgid "%s: get size failed"
msgstr "%s：获取大小失败"

#: sys-utils/swapon.c:561
#, c-format
msgid "%s: read swap header failed"
msgstr "%s：读交换区头失败"

#: sys-utils/swapon.c:566
#, c-format
msgid "%s: found signature [pagesize=%d, signature=%s]"
msgstr "%s：找到签名[页尺寸=%d, 签名=%s]"

#: sys-utils/swapon.c:577
#, c-format
msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
msgstr "%s：页大小=%d，交换区大小=%llu，设备大小=%llu"

#: sys-utils/swapon.c:582
#, c-format
msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
msgstr "%s：末页 0x%08llx 大于交换空间的实际大小"

#: sys-utils/swapon.c:592
#, c-format
msgid "%s: swap format pagesize does not match."
msgstr "%s：交换格式 页大小 不匹配。"

#: sys-utils/swapon.c:598
#, c-format
msgid "%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
msgstr "%s：交换格式 页大小 不匹配。(使用 --fixpgsz 来重新对它初始化。)"

#: sys-utils/swapon.c:607
#, c-format
msgid "%s: software suspend data detected. Rewriting the swap signature."
msgstr "%s：检测到软件挂起数据。将重新写交换签名。"

#: sys-utils/swapon.c:677
#, c-format
msgid "swapon %s\n"
msgstr "swapon %s\n"

#: sys-utils/swapon.c:681
#, c-format
msgid "%s: swapon failed"
msgstr "%s：swapon 失败"

#: sys-utils/swapon.c:760
#, c-format
msgid "%s: noauto option -- ignored"
msgstr "%s：无自动选项 -- 已忽略"

#: sys-utils/swapon.c:782
#, c-format
msgid "%s: already active -- ignored"
msgstr "%s：已激活 -- 已忽略"

#: sys-utils/swapon.c:788
#, c-format
msgid "%s: inaccessible -- ignored"
msgstr "%s：无法访问 -- 已忽略"

#: sys-utils/swapon.c:810
msgid "Enable devices and files for paging and swapping.\n"
msgstr "允许将设备和文件用于分页和交换。\n"

#: sys-utils/swapon.c:813
msgid " -a, --all                enable all swaps from /etc/fstab\n"
msgstr " -a, --all                启用 /etc/fstab 中的所有交换区\n"

#: sys-utils/swapon.c:814
msgid " -d, --discard[=<policy>] enable swap discards, if supported by device\n"
msgstr " -d, --discard[=<policy>] 如果设备支持，启用 swap 丢弃\n"

#: sys-utils/swapon.c:815
msgid " -e, --ifexists           silently skip devices that do not exist\n"
msgstr " -e, --ifexists           自动跳过不存在的设备而不提示\n"

#: sys-utils/swapon.c:816
msgid " -f, --fixpgsz            reinitialize the swap space if necessary\n"
msgstr " -f, --fixpgsz            必要时重新初始化交换区\n"

#: sys-utils/swapon.c:817
msgid " -o, --options <list>     comma-separated list of swap options\n"
msgstr " -o, --options <列表>     以英文逗号分隔的 swap 选项\n"

#: sys-utils/swapon.c:818
msgid " -p, --priority <prio>    specify the priority of the swap device\n"
msgstr " -p, --priority <优先级>  指定交换设备的优先级\n"

#: sys-utils/swapon.c:819
msgid " -s, --summary            display summary about used swap devices (DEPRECATED)\n"
msgstr " -s, --summary            显示已使用交换设备的摘要(已废弃)\n"

#: sys-utils/swapon.c:820
#, fuzzy
#| msgid " -a, --all           trim all mounted filesystems that are supported\n"
msgid " -T, --fstab <path>       alternative file to /etc/fstab\n"
msgstr " -a, --all           修剪不支持的所有已挂载文件系统\n"

#: sys-utils/swapon.c:821
msgid "     --show[=<columns>]   display summary in definable table\n"
msgstr "     --show[=<列>]        以可自定义的表格形式打印摘要\n"

#: sys-utils/swapon.c:822
msgid "     --noheadings         don't print table heading (with --show)\n"
msgstr "     --noheadings         不打印表头(与 --show 合用)\n"

#: sys-utils/swapon.c:823
msgid "     --raw                use the raw output format (with --show)\n"
msgstr "     --raw                使用原生输出格式(与 --show 合用)\n"

#: sys-utils/swapon.c:824
msgid "     --bytes              display swap size in bytes in --show output\n"
msgstr "     --bytes              在 --show 输出中以字节数显示交换区大小\n"

#: sys-utils/swapon.c:825
msgid " -v, --verbose            verbose mode\n"
msgstr " -v, --verbose                 详尽模式\n"

#: sys-utils/swapon.c:830
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             synonym for LABEL=<label>\n"
" -U <uuid>              synonym for UUID=<uuid>\n"
" LABEL=<label>          specifies device by swap area label\n"
" UUID=<uuid>            specifies device by swap area UUID\n"
" PARTLABEL=<label>      specifies device by partition label\n"
" PARTUUID=<uuid>        specifies device by partition UUID\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
msgstr ""
"\n"
"<spec> 参数：\n"
" -L <标签>              同 LABEL=<标签>\n"
" -U <uuid>              同 UUID=<uuid>\n"
" LABEL=<标签>           按交换区标签指定设备\n"
" UUID=<uuid>            按交换区 UUID 指定设备\n"
" PARTLABEL=<标签>       按分区标签指定设备\n"
" PARTUUID=<uuid>        按分区 UUID 指定设备\n"
" <设备>                 要使用设备的名称\n"
" <文件>                 要使用文件的名称\n"

#: sys-utils/swapon.c:840
msgid ""
"\n"
"Available discard policy types (for --discard):\n"
" once    : only single-time area discards are issued\n"
" pages   : freed pages are discarded before they are reused\n"
"If no policy is selected, both discard types are enabled (default).\n"
msgstr ""
"\n"
"可用的丢弃策略类型(针对 --discard)：\n"
" once\t  ：只进行单次区域丢弃(swapon)\n"
" pages\t  ：对释放的页在重新使用前丢弃\n"
" * 如果未选择策略，则两者都将启用。(默认)\n"

#: sys-utils/swapon.c:923
msgid "failed to parse priority"
msgstr "解析优先级失败"

#: sys-utils/swapon.c:945
#, c-format
msgid "unsupported discard policy: %s"
msgstr "不支持的丢弃策略：%s"

#: sys-utils/swapon-common.c:73
#, c-format
msgid "cannot find the device for %s"
msgstr "找不到对应 %s 的设备"

#: sys-utils/switch_root.c:60
msgid "failed to open directory"
msgstr "打开目录失败"

#: sys-utils/switch_root.c:67
msgid "stat failed"
msgstr "stat 失败"

#: sys-utils/switch_root.c:78
msgid "failed to read directory"
msgstr "读目录失败"

#: sys-utils/switch_root.c:113
#, c-format
msgid "failed to unlink %s"
msgstr "unlink %s 失败"

#: sys-utils/switch_root.c:160
#, c-format
msgid "failed to mount moving %s to %s"
msgstr "将 %s 挂载移动到 %s 失败"

#: sys-utils/switch_root.c:162
#, c-format
msgid "forcing unmount of %s"
msgstr "正在强制卸载 %s"

#: sys-utils/switch_root.c:168
#, c-format
msgid "failed to change directory to %s"
msgstr "将目录更改到 %s 失败"

#: sys-utils/switch_root.c:179
#, c-format
msgid "failed to mount moving %s to /"
msgstr "将 %s 挂载移动到 / 失败"

#: sys-utils/switch_root.c:184
msgid "failed to change root"
msgstr "更改 root 失败"

#: sys-utils/switch_root.c:203
msgid "old root filesystem is not an initramfs"
msgstr "旧根文件系统不是 initramfs 格式"

#: sys-utils/switch_root.c:226
#, c-format
msgid " %s [options] <newrootdir> <init> <args to init>\n"
msgstr " %s [选项] <新根目录> <init 程序> <init 程序参数>\n"

#: sys-utils/switch_root.c:230
msgid "Switch to another filesystem as the root of the mount tree.\n"
msgstr "切换到另一个文件系统作为挂载树的根目录。\n"

#: sys-utils/switch_root.c:275
msgid "failed. Sorry."
msgstr "失败了。抱歉。"

#: sys-utils/switch_root.c:278
#, c-format
msgid "cannot access %s"
msgstr "无法访问 %s"

#: sys-utils/tunelp.c:98
msgid "Set various parameters for the line printer.\n"
msgstr "设置行式打印机的各种参数。\n"

#: sys-utils/tunelp.c:101
msgid " -i, --irq <num>              specify parallel port irq\n"
msgstr " -i, --irq <数字>             指定并口中断号\n"

#: sys-utils/tunelp.c:102
msgid " -t, --time <ms>              driver wait time in milliseconds\n"
msgstr " -t, --time <毫秒数>          驱动等待时间(毫秒)\n"

#: sys-utils/tunelp.c:103
msgid " -c, --chars <num>            number of output characters before sleep\n"
msgstr " -c, --chars <数字>     睡眠前输出的字符数\n"

#: sys-utils/tunelp.c:104
msgid " -w, --wait <us>              strobe wait in micro seconds\n"
msgstr " -w, --wait <微秒数>          选通(strobe)信号等待时间(微秒)\n"

#. TRANSLATORS: do not translate <on|off> arguments. The
#. argument reader does not recognize locale, unless `on' is
#. exactly that very same string.
#: sys-utils/tunelp.c:108
msgid " -a, --abort <on|off>         abort on error\n"
msgstr " -a, --abort <on|off>         出错时中止\n"

#: sys-utils/tunelp.c:109
msgid " -o, --check-status <on|off>  check printer status before printing\n"
msgstr " -o, --check-status <on|off>  打印前检查打印机状态\n"

#: sys-utils/tunelp.c:110
msgid " -C, --careful <on|off>       extra checking to status check\n"
msgstr " -C, --careful <on|off>       进行状态检查外的其他检查\n"

#: sys-utils/tunelp.c:111
msgid " -s, --status                 query printer status\n"
msgstr " -s, --status                 查询打印机状态\n"

#: sys-utils/tunelp.c:112
msgid " -r, --reset                  reset the port\n"
msgstr " -r, --reset                  重置端口\n"

#: sys-utils/tunelp.c:113
msgid " -q, --print-irq <on|off>     display current irq setting\n"
msgstr " -q, --print-irq <on|off>     显示当前的中断设置\n"

#: sys-utils/tunelp.c:258
#, c-format
msgid "%s not an lp device"
msgstr "%s 不是循环设备"

#: sys-utils/tunelp.c:277
msgid "LPGETSTATUS error"
msgstr "LPGETSTATUS 出错"

#: sys-utils/tunelp.c:282
#, c-format
msgid "%s status is %d"
msgstr "%s 状态为 %d"

#: sys-utils/tunelp.c:284
#, c-format
msgid ", busy"
msgstr "，忙碌"

#: sys-utils/tunelp.c:286
#, c-format
msgid ", ready"
msgstr "，就绪"

#: sys-utils/tunelp.c:288
#, c-format
msgid ", out of paper"
msgstr "，缺页"

#: sys-utils/tunelp.c:290
#, c-format
msgid ", on-line"
msgstr "，在线"

#: sys-utils/tunelp.c:292
#, c-format
msgid ", error"
msgstr "，错误"

#: sys-utils/tunelp.c:296
msgid "ioctl failed"
msgstr "ioctl 失败"

#: sys-utils/tunelp.c:306
msgid "LPGETIRQ error"
msgstr "LPGETIRQ 出错"

#: sys-utils/tunelp.c:311
#, c-format
msgid "%s using IRQ %d\n"
msgstr "%s 使用中断请求 %d\n"

#: sys-utils/tunelp.c:313
#, c-format
msgid "%s using polling\n"
msgstr "%s 使用轮询\n"

#: sys-utils/umount.c:82
#, c-format
msgid ""
" %1$s [-hV]\n"
" %1$s -a [options]\n"
" %1$s [options] <source> | <directory>\n"
msgstr ""
" %1$s [-hV]\n"
" %1$s -a [选项]\n"
" %1$s [选项] <源> | <目录>\n"

#: sys-utils/umount.c:88
msgid "Unmount filesystems.\n"
msgstr "卸载文件系统。\n"

#: sys-utils/umount.c:91
msgid " -a, --all               unmount all filesystems\n"
msgstr " -a, --all               卸载所有文件系统\n"

#: sys-utils/umount.c:92
msgid ""
" -A, --all-targets       unmount all mountpoints for the given device in the\n"
"                           current namespace\n"
msgstr ""
" -A, --all-targets       卸载当前名字空间内指定设备\n"
"                         对应的所有挂臷点\n"

#: sys-utils/umount.c:95
msgid " -d, --detach-loop       if mounted loop device, also free this loop device\n"
msgstr " -d, --detach-loop       若挂臷了回环设备，也释放该回环设备\n"

#: sys-utils/umount.c:96
msgid "     --fake              dry run; skip the umount(2) syscall\n"
msgstr "     --fake              空运行；跳过 umount(2) 系统调用\n"

#: sys-utils/umount.c:97
msgid " -f, --force             force unmount (in case of an unreachable NFS system)\n"
msgstr " -f, --force             强制卸载(遇到不响应的 NFS 系统时)\n"

#: sys-utils/umount.c:98
msgid " -i, --internal-only     don't call the umount.<type> helpers\n"
msgstr " -i, --internal-only     不调用 umount.<类型> 辅助程序\n"

#: sys-utils/umount.c:100
msgid " -l, --lazy              detach the filesystem now, clean up things later\n"
msgstr " -l, --lazy              立即断开文件系统，清理以后执行\n"

#: sys-utils/umount.c:102
msgid " -R, --recursive         recursively unmount a target with all its children\n"
msgstr " -R, --recursive         递归卸载目录及其子对象\n"

#: sys-utils/umount.c:103
msgid " -r, --read-only         in case unmounting fails, try to remount read-only\n"
msgstr " -r, --read-only         若卸载失败，尝试以只读方式重新挂臷\n"

#: sys-utils/umount.c:106
msgid " -q, --quiet             suppress 'not mounted' error messages\n"
msgstr " -q, --quiet             不要输出“未挂载”错误信息\n"

#: sys-utils/umount.c:107
msgid " -N, --namespace <ns>    perform umount in another namespace\n"
msgstr " -N, --namespace <ns>    在另一个命名空间进行卸载\n"

#: sys-utils/umount.c:152
#, c-format
msgid "%s (%s) unmounted"
msgstr "%s (%s) 已卸载"

#: sys-utils/umount.c:154
#, c-format
msgid "%s unmounted"
msgstr "%s 未挂载"

#: sys-utils/umount.c:232
msgid "failed to set umount target"
msgstr "设置卸载目标失败"

#: sys-utils/umount.c:265
msgid "libmount table allocation failed"
msgstr "libmount 表分配失败"

#: sys-utils/umount.c:311 sys-utils/umount.c:403
msgid "libmount iterator allocation failed"
msgstr "分配 libmount 迭代器失败！"

#: sys-utils/umount.c:324
#, c-format
msgid "failed to get child fs of %s"
msgstr "获取 %s 的子文件系统失败"

#: sys-utils/umount.c:366 sys-utils/umount.c:390
#, c-format
msgid "%s: not found"
msgstr "%s：找不到"

#: sys-utils/umount.c:397
#, c-format
msgid "%s: failed to determine source (--all-targets is unsupported on systems with regular mtab file)."
msgstr "%s：确定源失败(有常规 mtab 文件的系统不支持 --all-targets)"

#: sys-utils/unshare.c:98
#, c-format
msgid "unsupported --setgroups argument '%s'"
msgstr "不支持的 --setgroups 参数“%s”"

#: sys-utils/unshare.c:119 sys-utils/unshare.c:134
#, c-format
msgid "write failed %s"
msgstr "写失败：%s"

#: sys-utils/unshare.c:157
#, c-format
msgid "unsupported propagation mode: %s"
msgstr "不受支持的传播模式︰%s"

#: sys-utils/unshare.c:166
msgid "cannot change root filesystem propagation"
msgstr "无法更改根文件系统传播"

#: sys-utils/unshare.c:197
#, c-format
msgid "mount %s on %s failed"
msgstr "将 %s 挂载到 %s 失败"

#: sys-utils/unshare.c:224
msgid "failed to open /proc/self/timens_offsets"
msgstr "打开 /proc/self/timens_offsets 失败"

#: sys-utils/unshare.c:227
msgid "failed to write to /proc/self/timens_offsets"
msgstr "写入 /proc/self/timens_offsets 失败"

#: sys-utils/unshare.c:294
#, fuzzy
#| msgid "reset failed"
msgid "eventfd failed"
msgstr "reset 失败"

#: sys-utils/unshare.c:304
#, fuzzy
#| msgid "failed to read speed"
msgid "failed to read eventfd"
msgstr "读 速度 失败"

#: sys-utils/unshare.c:402
#, fuzzy, c-format
#| msgid "invalid date '%s'"
msgid "invalid mapping '%s'"
msgstr "无效日期“%s”"

#: sys-utils/unshare.c:430
#, fuzzy, c-format
#| msgid "could not read: %s"
msgid "could not open '%s'"
msgstr "无法读取︰%s"

#: sys-utils/unshare.c:455 sys-utils/unshare.c:461
#, fuzzy
#| msgid "failed to parse uid"
msgid "failed to parse subid map"
msgstr "解析 uid 失败"

#: sys-utils/unshare.c:470
#, c-format
msgid "no line matching user \"%s\" in %s"
msgstr ""

#: sys-utils/unshare.c:647
msgid "Run a program with some namespaces unshared from the parent.\n"
msgstr "以某些未与父(进程)共享的名字空间运行某个程序。\n"

#: sys-utils/unshare.c:650
msgid " -m, --mount[=<file>]      unshare mounts namespace\n"
msgstr " -m, --mount[=<文件>]      取消共享 mounts 名字空间\n"

#: sys-utils/unshare.c:651
msgid " -u, --uts[=<file>]        unshare UTS namespace (hostname etc)\n"
msgstr " -u, --uts[=<文件>]        取消共享 UTS 名字空间(主机名等)\n"

#: sys-utils/unshare.c:652
msgid " -i, --ipc[=<file>]        unshare System V IPC namespace\n"
msgstr " -i, --ipc[=<文件>]        取消共享 System V IPC 名字空间\n"

#: sys-utils/unshare.c:653
msgid " -n, --net[=<file>]        unshare network namespace\n"
msgstr " -n, --net[=<file>]        取消共享网络名字空间\n"

#: sys-utils/unshare.c:654
msgid " -p, --pid[=<file>]        unshare pid namespace\n"
msgstr " -p, --pid[=<文件>]        取消共享 pid 名字空间\n"

#: sys-utils/unshare.c:655
msgid " -U, --user[=<file>]       unshare user namespace\n"
msgstr " -U, --user[=<文件>]       取消共享用户名字空间\n"

#: sys-utils/unshare.c:656
msgid " -C, --cgroup[=<file>]     unshare cgroup namespace\n"
msgstr " -C, --cgroup[=<文件>]     取消共享 cgroup 名字空间\n"

#: sys-utils/unshare.c:657
msgid " -T, --time[=<file>]       unshare time namespace\n"
msgstr " -T, --time[=<文件>]       取消共享时间名字空间\n"

#: sys-utils/unshare.c:659
msgid " -f, --fork                fork before launching <program>\n"
msgstr " -f, --fork                在启动<程序>前 fork\n"

#: sys-utils/unshare.c:660
#, fuzzy
#| msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgid " --map-user=<uid>|<name>   map current user to uid (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:661
#, fuzzy
#| msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgid " --map-group=<gid>|<name>  map current group to gid (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:662
msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:663
#, fuzzy
#| msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgid " -c, --map-current-user    map current user to itself (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:664
#, fuzzy
#| msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgid " --map-auto                map users and groups automatically (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:665
#, fuzzy
#| msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgid ""
" --map-users=<inneruid>:<outeruid>:<count>\n"
"                           map count users from outeruid to inneruid (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:667
#, fuzzy
#| msgid " -r, --map-root-user       map current user to root (implies --user)\n"
msgid ""
" --map-groups=<innergid>:<outergid>:<count>\n"
"                           map count groups from outergid to innergid (implies --user)\n"
msgstr " -r, --map-root-user       将当前用户映射为 root (连带打开 --user)\n"

#: sys-utils/unshare.c:670
msgid ""
" --kill-child[=<signame>]  when dying, kill the forked child (implies --fork)\n"
"                             defaults to SIGKILL\n"
msgstr ""

#: sys-utils/unshare.c:672
#, fuzzy
#| msgid "     --mount-proc[=<dir>]  mount proc filesystem first (implies --mount)\n"
msgid " --mount-proc[=<dir>]      mount proc filesystem first (implies --mount)\n"
msgstr "     --mount-proc[=<目录>] 先挂载 proc 文件系统(连带打开 --mount)\n"

#: sys-utils/unshare.c:673
#, fuzzy
#| msgid ""
#| "     --propagation slave|shared|private|unchanged\n"
#| "                           modify mount propagation in mount namespace\n"
msgid ""
" --propagation slave|shared|private|unchanged\n"
"                           modify mount propagation in mount namespace\n"
msgstr ""
"     --propagation slave|shared|private|unchanged\n"
"                           修改 mount 名字空间中的 mount 传播\n"

#: sys-utils/unshare.c:675
#, fuzzy
#| msgid " -s, --setgroups allow|deny  control the setgroups syscall in user namespaces\n"
msgid " --setgroups allow|deny    control the setgroups syscall in user namespaces\n"
msgstr " -s, --setgroups allow|deny  控制用户名字空间中的 setgroups 系统调用\n"

#: sys-utils/unshare.c:676
#, fuzzy
#| msgid " -a, --all            print all devices\n"
msgid " --keep-caps               retain capabilities granted in user namespaces\n"
msgstr " -a, --all            打印所有设备\n"

#: sys-utils/unshare.c:678
#, fuzzy
#| msgid " -r, --root[=<dir>]     set the root directory\n"
msgid " -R, --root=<dir>          run the command with root directory set to <dir>\n"
msgstr " -r, --root[=<目录>]     设置根目录\n"

#: sys-utils/unshare.c:679
#, fuzzy
#| msgid " -w, --wd=<dir>\t    change working directory to <dir>\n"
msgid " -w, --wd=<dir>            change working directory to <dir>\n"
msgstr " -w, --wd=<dir>\t    变更工作目录为 <dir>\n"

#: sys-utils/unshare.c:680
#, fuzzy
#| msgid " -S, --setuid <uid>     set uid in entered namespace\n"
msgid " -S, --setuid <uid>        set uid in entered namespace\n"
msgstr " -S, --setuid <uid>     设置进入空间中的 uid\n"

#: sys-utils/unshare.c:681
#, fuzzy
#| msgid " -G, --setgid <gid>     set gid in entered namespace\n"
msgid " -G, --setgid <gid>        set gid in entered namespace\n"
msgstr " -G, --setgid <gid>     设置进入名字空间中的 gid\n"

#: sys-utils/unshare.c:682
msgid " --monotonic <offset>      set clock monotonic offset (seconds) in time namespaces\n"
msgstr ""

#: sys-utils/unshare.c:683
msgid " --boottime <offset>       set clock boottime offset (seconds) in time namespaces\n"
msgstr ""

#: sys-utils/unshare.c:898
#, fuzzy
#| msgid "failed to parse offset"
msgid "failed to parse monotonic offset"
msgstr "解析偏移失败"

#: sys-utils/unshare.c:902
#, fuzzy
#| msgid "failed to parse offset"
msgid "failed to parse boottime offset"
msgstr "解析偏移失败"

#: sys-utils/unshare.c:916
msgid "options --monotonic and --boottime require unsharing of a time namespace (-t)"
msgstr ""

#: sys-utils/unshare.c:930
msgid "unshare failed"
msgstr "unshare 失败"

#: sys-utils/unshare.c:947
#, fuzzy
#| msgid "sigprocmask failed"
msgid "sigprocmask block failed"
msgstr "sigprocmask 失败"

#: sys-utils/unshare.c:953
#, fuzzy
#| msgid "pidfd_open() failed: %d"
msgid "pidfd_open failed"
msgstr "pidfd_open() 失败：%d"

#: sys-utils/unshare.c:966
#, fuzzy
#| msgid "sigprocmask failed"
msgid "sigprocmask restore failed"
msgstr "sigprocmask 失败"

#: sys-utils/unshare.c:1002
#, fuzzy
#| msgid "sigprocmask failed"
msgid "sigprocmask unblock failed"
msgstr "sigprocmask 失败"

#: sys-utils/unshare.c:1006
msgid "child exit failed"
msgstr "子进程退出失败"

#: sys-utils/unshare.c:1045
#, fuzzy
#| msgid "options --setgroups=allow and --map-root-user are mutually exclusive"
msgid "options --setgroups=allow and --map-group are mutually exclusive"
msgstr "--setgroups=allow 和 --map-root-user 选项是互斥的"

#: sys-utils/unshare.c:1060
#, c-format
msgid "cannot change root directory to '%s'"
msgstr "无法更改根目录至“%s”"

#: sys-utils/unshare.c:1064
#, c-format
msgid "cannot chdir to '%s'"
msgstr "无法更改目录（chdir）到“%s”"

#: sys-utils/unshare.c:1076
#, fuzzy, c-format
#| msgid "cannot change root filesystem propagation"
msgid "cannot change %s filesystem propagation"
msgstr "无法更改根文件系统传播"

#: sys-utils/unshare.c:1080
#, c-format
msgid "mount %s failed"
msgstr "挂载 %s 失败"

#: sys-utils/unshare.c:1105
msgid "capget failed"
msgstr "capget 失败"

#: sys-utils/unshare.c:1113
msgid "capset failed"
msgstr "capset 失败"

#: sys-utils/unshare.c:1125
msgid "prctl(PR_CAP_AMBIENT) failed"
msgstr "prctl(PR_CAP_AMBIENT) 失败"

#: sys-utils/wdctl.c:73
msgid "Card previously reset the CPU"
msgstr "卡曾经重置 CPU"

#: sys-utils/wdctl.c:74
msgid "External relay 1"
msgstr "外部中继 1"

#: sys-utils/wdctl.c:75
msgid "External relay 2"
msgstr "外部中继 2"

#: sys-utils/wdctl.c:76
msgid "Fan failed"
msgstr "风扇失败"

#: sys-utils/wdctl.c:77
msgid "Keep alive ping reply"
msgstr "保持活动 ping 回应"

#: sys-utils/wdctl.c:78
msgid "Supports magic close char"
msgstr "支持 magic close 字符"

#: sys-utils/wdctl.c:79
msgid "Reset due to CPU overheat"
msgstr "因 CPU 过热重置"

#: sys-utils/wdctl.c:80
msgid "Power over voltage"
msgstr "供电电压过高"

#: sys-utils/wdctl.c:81
msgid "Power bad/power fault"
msgstr "供电问题/供电故障"

#: sys-utils/wdctl.c:82
msgid "Pretimeout (in seconds)"
msgstr "预超时(秒)"

#: sys-utils/wdctl.c:83
msgid "Set timeout (in seconds)"
msgstr "设置超时(秒)"

#: sys-utils/wdctl.c:84
msgid "Not trigger reboot"
msgstr "不触发重启"

#: sys-utils/wdctl.c:100
msgid "flag name"
msgstr "标志名称"

#: sys-utils/wdctl.c:101
msgid "flag description"
msgstr "标志描述"

#: sys-utils/wdctl.c:102
msgid "flag status"
msgstr "标志状态"

#: sys-utils/wdctl.c:103
msgid "flag boot status"
msgstr "标志启动状态"

#: sys-utils/wdctl.c:104
msgid "watchdog device name"
msgstr "看门狗设备名称"

#: sys-utils/wdctl.c:166
#, c-format
msgid "unknown flag: %s"
msgstr "未知标志：%s"

#: sys-utils/wdctl.c:228
msgid "Show the status of the hardware watchdog.\n"
msgstr "显示硬件看门狗的状态。\n"

#: sys-utils/wdctl.c:231
#, fuzzy
#| msgid ""
#| " -f, --flags <list>     print selected flags only\n"
#| " -F, --noflags          don't print information about flags\n"
#| " -I, --noident          don't print watchdog identity information\n"
#| " -n, --noheadings       don't print headings for flags table\n"
#| " -O, --oneline          print all information on one line\n"
#| " -o, --output <list>    output columns of the flags\n"
#| " -r, --raw              use raw output format for flags table\n"
#| " -T, --notimeouts       don't print watchdog timeouts\n"
#| " -s, --settimeout <sec> set watchdog timeout\n"
#| " -x, --flags-only       print only flags table (same as -I -T)\n"
msgid ""
" -f, --flags <list>     print selected flags only\n"
" -F, --noflags          don't print information about flags\n"
" -I, --noident          don't print watchdog identity information\n"
" -n, --noheadings       don't print headings for flags table\n"
" -O, --oneline          print all information on one line\n"
" -o, --output <list>    output columns of the flags\n"
" -p, --setpretimeout <sec> set watchdog pre-timeout\n"
" -g, --setpregovernor <name> set pre-timeout governor\n"
" -r, --raw              use raw output format for flags table\n"
" -T, --notimeouts       don't print watchdog timeouts\n"
" -s, --settimeout <sec> set watchdog timeout\n"
" -x, --flags-only       print only flags table (same as -I -T)\n"
msgstr ""
" -f, --flags <列表>     只打印选择的标志\n"
" -F, --noflags          不打印标志的相关信息\n"
" -I, --noident          不打印 watchdog 标识信息\n"
" -n, --noheadings       不打印标志表格的表头\n"
" -O, --oneline          将所有信息打印为一行\n"
" -o, --output <列表>    标志要输出的列\n"
" -r, --raw              标志表格使用原生输出格式\n"
" -T, --notimeouts       不打印看门狗超时\n"
" -s, --settimeout <秒>  设置看门狗超时\n"
" -x, --flags-only       只打印标志表格(同 -I -T)\n"

#: sys-utils/wdctl.c:249
#, c-format
msgid "The default device is %s.\n"
msgstr "默认设备为 %s。\n"

#: sys-utils/wdctl.c:251
#, c-format
msgid "No default device is available.\n"
msgstr "没有可用的默认设备。\n"

#: sys-utils/wdctl.c:379
#, c-format
msgid "%s: unknown flags 0x%x\n"
msgstr "%s：未知标志 0x%x\n"

#: sys-utils/wdctl.c:415
#, c-format
msgid "%s: watchdog already in use, terminating."
msgstr "%s：看门狗正在使用，将终止。"

#: sys-utils/wdctl.c:429 sys-utils/wdctl.c:528
#, c-format
msgid "%s: failed to disarm watchdog"
msgstr "%s：喂看门狗失败"

#: sys-utils/wdctl.c:439
#, c-format
msgid "cannot set timeout for %s"
msgstr "无法设置 %s 的超时"

#: sys-utils/wdctl.c:441
#, c-format
msgid "Timeout has been set to %d second.\n"
msgid_plural "Timeout has been set to %d seconds.\n"
msgstr[0] "超时已调整为 %d 秒\n"

#: sys-utils/wdctl.c:449
#, fuzzy, c-format
#| msgid "cannot set timeout for %s"
msgid "cannot set pretimeout for %s"
msgstr "无法设置 %s 的超时"

#: sys-utils/wdctl.c:451
#, fuzzy, c-format
#| msgid "Timeout has been set to %d second.\n"
#| msgid_plural "Timeout has been set to %d seconds.\n"
msgid "Pre-timeout has been set to %d second.\n"
msgid_plural "Pre-timeout has been set to %d seconds.\n"
msgstr[0] "超时已调整为 %d 秒\n"

#: sys-utils/wdctl.c:470
#, fuzzy
#| msgid "cannot set timeout for %s"
msgid "cannot set pre-timeout governor"
msgstr "无法设置 %s 的超时"

#: sys-utils/wdctl.c:500
#, c-format
msgid "%s: failed to get information about watchdog"
msgstr "%s：获取看门狗信息失败"

#: sys-utils/wdctl.c:609
#, c-format
msgid "cannot read information about %s"
msgstr "无法读取有关 %s 的信息"

#: sys-utils/wdctl.c:620 sys-utils/wdctl.c:623 sys-utils/wdctl.c:626
#, c-format
msgid "%-14s %2i second\n"
msgid_plural "%-14s %2i seconds\n"
msgstr[0] "%-14s %2i 秒\n"

#: sys-utils/wdctl.c:621
msgid "Timeout:"
msgstr "超时："

#: sys-utils/wdctl.c:624
msgid "Timeleft:"
msgstr "剩余时间："

#: sys-utils/wdctl.c:627
msgid "Pre-timeout:"
msgstr "预超时："

#: sys-utils/wdctl.c:633 sys-utils/wdctl.c:638
#, fuzzy, c-format
#| msgid "%-14s %2i second\n"
#| msgid_plural "%-14s %2i seconds\n"
msgid "%-14s %s\n"
msgstr "%-14s %2i 秒\n"

#: sys-utils/wdctl.c:633
#, fuzzy
#| msgid "Pre-timeout:"
msgid "Pre-timeout governor:"
msgstr "预超时："

#: sys-utils/wdctl.c:639
#, fuzzy
#| msgid ""
#| "\n"
#| "Available output columns:\n"
msgid "Available pre-timeout governors:"
msgstr ""
"\n"
"可用的输出列：\n"

#: sys-utils/wdctl.c:697
msgid "Device:"
msgstr "设备："

#: sys-utils/wdctl.c:699
msgid "Identity:"
msgstr "标识："

#: sys-utils/wdctl.c:701
msgid "version"
msgstr "版本："

#: sys-utils/wdctl.c:768
#, fuzzy
#| msgid "invalid timeout argument"
msgid "invalid pretimeout argument"
msgstr "无效的 timeout 超时参数"

#: sys-utils/wdctl.c:822
msgid "No default device is available."
msgstr "无可用默认设备。"

#: sys-utils/zramctl.c:75
msgid "zram device name"
msgstr "zram 设备名称"

#: sys-utils/zramctl.c:76
msgid "limit on the uncompressed amount of data"
msgstr "对未压缩数据量的限制"

#: sys-utils/zramctl.c:77
msgid "uncompressed size of stored data"
msgstr "存储数据的未压缩大小"

#: sys-utils/zramctl.c:78
msgid "compressed size of stored data"
msgstr "存储数据的压缩后大小"

#: sys-utils/zramctl.c:79
msgid "the selected compression algorithm"
msgstr "所选的压缩算法"

#: sys-utils/zramctl.c:80
msgid "number of concurrent compress operations"
msgstr "并发的压缩操作的数量"

#: sys-utils/zramctl.c:81
msgid "empty pages with no allocated memory"
msgstr "未分配内存的空页"

#: sys-utils/zramctl.c:82
msgid "all memory including allocator fragmentation and metadata overhead"
msgstr "包括分配器碎片和元数据开销在内的所有内存"

#: sys-utils/zramctl.c:83
msgid "memory limit used to store compressed data"
msgstr "用于存储压缩后数据的内存限制"

#: sys-utils/zramctl.c:84
msgid "memory zram have been consumed to store compressed data"
msgstr "已消耗内存 zram 来存储压缩的数据"

#: sys-utils/zramctl.c:85
msgid "number of objects migrated by compaction"
msgstr "通过压实迁移的对象数"

#: sys-utils/zramctl.c:378
msgid "Failed to parse mm_stat"
msgstr "解析 mm_stat 失败"

#: sys-utils/zramctl.c:541
#, c-format
msgid ""
" %1$s [options] <device>\n"
" %1$s -r <device> [...]\n"
" %1$s [options] -f | <device> -s <size>\n"
msgstr ""
" %1$s [选项] [<回环设备>]\n"
" %1$s [选项] -f | <回环设备> <文件>\n"

#: sys-utils/zramctl.c:547
msgid "Set up and control zram devices.\n"
msgstr "设置和控制 zram 设备。\n"

#: sys-utils/zramctl.c:550
#, fuzzy
#| msgid " -a, --algorithm lzo|lz4|lz4hc|deflate|842   compression algorithm to use\n"
msgid " -a, --algorithm <alg>     compression algorithm to use\n"
msgstr " -a, --algorithm lzo|lz4|lz4hc|deflate|842   要使用的压缩算法\n"

#: sys-utils/zramctl.c:551
msgid " -b, --bytes               print sizes in bytes rather than in human readable format\n"
msgstr " -b, --bytes               以字节为打印尺寸，而非易读格式\n"

#: sys-utils/zramctl.c:552
msgid " -f, --find                find a free device\n"
msgstr " -f, --find                查找空闲设备\n"

#: sys-utils/zramctl.c:553
msgid " -n, --noheadings          don't print headings\n"
msgstr " -n, --noheadings          不打印标题\n"

#: sys-utils/zramctl.c:554
msgid " -o, --output <list>       columns to use for status output\n"
msgstr " -o, --output <list>       用于状态输出的列\n"

#: sys-utils/zramctl.c:555
msgid "     --output-all          output all columns\n"
msgstr "     --output-all          输出所有列\n"

#: sys-utils/zramctl.c:556
msgid "     --raw                 use raw status output format\n"
msgstr "     --raw                 使用原生状态输出格式\n"

#: sys-utils/zramctl.c:557
msgid " -r, --reset               reset all specified devices\n"
msgstr " -r, --reset               重置所有指定的设备\n"

#: sys-utils/zramctl.c:558
msgid " -s, --size <size>         device size\n"
msgstr " -s, --size <尺寸>         设备尺寸\n"

#: sys-utils/zramctl.c:559
msgid " -t, --streams <number>    number of compression streams\n"
msgstr " -t, --streams <数字>      压缩流数量\n"

#: sys-utils/zramctl.c:567
msgid " <alg> specify algorithm, supported are:\n"
msgstr ""

#: sys-utils/zramctl.c:568
msgid "   lzo, lz4, lz4hc, deflate, 842 and zstd\n"
msgstr ""

#: sys-utils/zramctl.c:657
msgid "failed to parse streams"
msgstr "解析流失败"

#: sys-utils/zramctl.c:679
msgid "option --find is mutually exclusive with <device>"
msgstr "--find 选项与<设备>互斥"

#: sys-utils/zramctl.c:685
msgid "only one <device> at a time is allowed"
msgstr "一次只允许一个 <设备>"

#: sys-utils/zramctl.c:688
msgid "options --algorithm and --streams must be combined with --size"
msgstr "--algorithm 和 --streams 必须与 --size 合用"

#: sys-utils/zramctl.c:721 sys-utils/zramctl.c:750
#, c-format
msgid "%s: failed to reset"
msgstr "%s︰重置失败"

#: sys-utils/zramctl.c:732 sys-utils/zramctl.c:740
msgid "no free zram device found"
msgstr "未找到空闲的 zram 设备"

#: sys-utils/zramctl.c:754
#, c-format
msgid "%s: failed to set number of streams"
msgstr "%s︰设置流数量失败"

#: sys-utils/zramctl.c:758
#, c-format
msgid "%s: failed to set algorithm"
msgstr "%s︰设置算法失败"

#: sys-utils/zramctl.c:761
#, c-format
msgid "%s: failed to set disksize (%ju bytes)"
msgstr "%s：设置磁盘大小失败(%ju 个字节)"

#: term-utils/agetty.c:512
#, c-format
msgid "%s%s (automatic login)\n"
msgstr "%s%s (自动登录)\n"

#: term-utils/agetty.c:569
#, c-format
msgid "%s: can't change root directory %s: %m"
msgstr "%s：无法更改根目录 %s：%m"

#: term-utils/agetty.c:572
#, c-format
msgid "%s: can't change working directory %s: %m"
msgstr "%s：无法更改工作目录 %s：%m"

#: term-utils/agetty.c:575
#, c-format
msgid "%s: can't change process priority: %m"
msgstr "%s：无法更改进程优先级：%m"

#: term-utils/agetty.c:586
#, c-format
msgid "%s: can't exec %s: %m"
msgstr "%s：无法执行 %s：%m"

#: term-utils/agetty.c:617 term-utils/agetty.c:961 term-utils/agetty.c:1192
#: term-utils/agetty.c:1517 term-utils/agetty.c:1535 term-utils/agetty.c:1572
#: term-utils/agetty.c:1582 term-utils/agetty.c:1624 term-utils/agetty.c:1985
#: term-utils/agetty.c:2346 term-utils/agetty.c:2917
#, c-format
msgid "failed to allocate memory: %m"
msgstr "分配内存失败：%m"

#: term-utils/agetty.c:791
msgid "invalid delay argument"
msgstr "无效的延迟参数"

#: term-utils/agetty.c:829
msgid "invalid argument of --local-line"
msgstr "--local-line 选项参数无效"

#: term-utils/agetty.c:848
msgid "invalid nice argument"
msgstr "无效的 nice 参数"

#: term-utils/agetty.c:939
#, fuzzy, c-format
#| msgid "could not set terminal attributes"
msgid "could not get terminal name: %d"
msgstr "无法设置终端属性"

#: term-utils/agetty.c:966
#, c-format
msgid "bad speed: %s"
msgstr "速度有误：%s"

#: term-utils/agetty.c:968
msgid "too many alternate speeds"
msgstr "备选速度过多"

#: term-utils/agetty.c:1075 term-utils/agetty.c:1079 term-utils/agetty.c:1132
#, c-format
msgid "/dev/%s: cannot open as standard input: %m"
msgstr "/dev/%s：无法以标准输入打开：%m"

#: term-utils/agetty.c:1098
#, c-format
msgid "/dev/%s: not a character device"
msgstr "/dev/%s：不是字符设备"

#: term-utils/agetty.c:1100
#, c-format
msgid "/dev/%s: not a tty"
msgstr "/dev/%s：不是终端"

#: term-utils/agetty.c:1104 term-utils/agetty.c:1136
#, c-format
msgid "/dev/%s: cannot get controlling tty: %m"
msgstr "/dev/%s：无法获取控制 tty：%m"

#: term-utils/agetty.c:1126
#, c-format
msgid "/dev/%s: vhangup() failed: %m"
msgstr "/dev/%s：vhangup() 失败：%m"

#: term-utils/agetty.c:1147
#, c-format
msgid "%s: not open for read/write"
msgstr "%s：未打开(就)读/写"

#: term-utils/agetty.c:1152
#, c-format
msgid "/dev/%s: cannot set process group: %m"
msgstr "/dev/%s：无法设置进程组：%m"

#: term-utils/agetty.c:1166
#, c-format
msgid "%s: dup problem: %m"
msgstr "%s：dup 问题：%m"

#: term-utils/agetty.c:1183
#, c-format
msgid "%s: failed to get terminal attributes: %m"
msgstr "%s：获取终端属性失败：%m"

#: term-utils/agetty.c:1414 term-utils/agetty.c:1443
#, c-format
msgid "setting terminal attributes failed: %m"
msgstr "设置终端属性失败：%m"

#: term-utils/agetty.c:1562
msgid "cannot open os-release file"
msgstr "无法打开 os-release 文件"

#: term-utils/agetty.c:1729
#, c-format
msgid "failed to create reload file: %s: %m"
msgstr "未能创建 reload 文件︰%s：%m"

#: term-utils/agetty.c:2049
#, c-format
msgid "failed to get terminal attributes: %m"
msgstr "获取终端属性失败：%m"

#: term-utils/agetty.c:2071
msgid "[press ENTER to login]"
msgstr "[按 ENTER 键登录]"

#: term-utils/agetty.c:2099
msgid "Num Lock off"
msgstr "Num Lock 关"

#: term-utils/agetty.c:2102
msgid "Num Lock on"
msgstr "Num Lock 开"

#: term-utils/agetty.c:2105
msgid "Caps Lock on"
msgstr "Caps Lock 开"

#: term-utils/agetty.c:2108
msgid "Scroll Lock on"
msgstr "Scroll Lock 开"

#: term-utils/agetty.c:2111
#, c-format
msgid ""
"Hint: %s\n"
"\n"
msgstr ""
"提示：%s\n"
"\n"

#: term-utils/agetty.c:2255
#, c-format
msgid "%s: read: %m"
msgstr "%s：read：%m"

#: term-utils/agetty.c:2322
#, c-format
msgid "%s: input overrun"
msgstr "%s：输入过载"

#: term-utils/agetty.c:2342 term-utils/agetty.c:2350
#, c-format
msgid "%s: invalid character conversion for login name"
msgstr "%s：登录名字符转换无效"

#: term-utils/agetty.c:2356
#, c-format
msgid "%s: invalid character 0x%x in login name"
msgstr "%s：登录名中的字符 0x%x 无效"

#: term-utils/agetty.c:2441
#, c-format
msgid "%s: failed to set terminal attributes: %m"
msgstr "%s：设置终端属性失败：%m"

#: term-utils/agetty.c:2486
#, c-format
msgid ""
" %1$s [options] <line> [<baud_rate>,...] [<termtype>]\n"
" %1$s [options] <baud_rate>,... <line> [<termtype>]\n"
msgstr ""
" %1$s [选项] <线路> [<波特率>,...] [<终端类型>]\n"
" %1$s [选项] <波特率>,... <线路> [<终端类型>]\n"

#: term-utils/agetty.c:2490
msgid "Open a terminal and set its mode.\n"
msgstr "打开一个终端并设置其模式。\n"

#: term-utils/agetty.c:2493
msgid " -8, --8bits                assume 8-bit tty\n"
msgstr " -8, --8bits                采用 8 位 tty\n"

#: term-utils/agetty.c:2494
msgid " -a, --autologin <user>     login the specified user automatically\n"
msgstr " -a, --autologin <用户>     以指定用户自动登录\n"

#: term-utils/agetty.c:2495
msgid " -c, --noreset              do not reset control mode\n"
msgstr " -c, --noreset              不重置控制模式\n"

#: term-utils/agetty.c:2496
msgid " -E, --remote               use -r <hostname> for login(1)\n"
msgstr " -E, --remote               使用 -r <主机名> 选项调用 login(1)\n"

#: term-utils/agetty.c:2497
#, fuzzy
#| msgid " -f, --issue-file <file>    display issue file\n"
msgid " -f, --issue-file <list>    display issue files or directories\n"
msgstr " -f, --issue-file <文件>    指定要显示的预登录消息(issue)文件\n"

#: term-utils/agetty.c:2498
msgid "     --show-issue           display issue file and exit\n"
msgstr "     --show-issue           显示预登录（issue）文件并退出\n"

#: term-utils/agetty.c:2499
msgid " -h, --flow-control         enable hardware flow control\n"
msgstr " -h, --flow-control         启用硬件流控制\n"

#: term-utils/agetty.c:2500
msgid " -H, --host <hostname>      specify login host\n"
msgstr " -H, --host <主机名>        指定登录主机\n"

#: term-utils/agetty.c:2501
msgid " -i, --noissue              do not display issue file\n"
msgstr " -i, --noissue              不显示预登录消息(issue)文件\n"

#: term-utils/agetty.c:2502
msgid " -I, --init-string <string> set init string\n"
msgstr " -I, --init-string <字符串> 设置初始字符串\n"

#: term-utils/agetty.c:2503
msgid " -J  --noclear              do not clear the screen before prompt\n"
msgstr " -J  --noclear              提示之前不清屏\n"

#: term-utils/agetty.c:2504
msgid " -l, --login-program <file> specify login program\n"
msgstr " -l, --login-program <文件> 指定登录程序\n"

#: term-utils/agetty.c:2505
msgid " -L, --local-line[=<mode>]  control the local line flag\n"
msgstr " -L, --local-line[=<模式>]  控制本地线路标志\n"

#: term-utils/agetty.c:2506
msgid " -m, --extract-baud         extract baud rate during connect\n"
msgstr " -m, --extract-baud         连接过程中提取波特率\n"

#: term-utils/agetty.c:2507
msgid " -n, --skip-login           do not prompt for login\n"
msgstr " -n, --skip-login           不提示登录\n"

#: term-utils/agetty.c:2508
msgid " -N  --nonewline            do not print a newline before issue\n"
msgstr " -N  --nonewline            预登录消息(issue)前不打印换行(newline)\n"

#: term-utils/agetty.c:2509
msgid " -o, --login-options <opts> options that are passed to login\n"
msgstr " -o, --login-options <选项> 传递给登录程序的选项\n"

#: term-utils/agetty.c:2510
msgid " -p, --login-pause          wait for any key before the login\n"
msgstr " -p, --login-pause          登录前等待按下任意键来继续\n"

#: term-utils/agetty.c:2511
msgid " -r, --chroot <dir>         change root to the directory\n"
msgstr " -r, --chroot <目录>        将根目录更改为指定目录\n"

#: term-utils/agetty.c:2512
msgid " -R, --hangup               do virtually hangup on the tty\n"
msgstr " -R, --hangup               对 tty 执行虚拟挂起(virtual hangup)\n"

#: term-utils/agetty.c:2513
msgid " -s, --keep-baud            try to keep baud rate after break\n"
msgstr " -s, --keep-baud            中断(break)后尝试保持波特率\n"

#: term-utils/agetty.c:2514
msgid " -t, --timeout <number>     login process timeout\n"
msgstr " -t, --timeout <数字>       登录进程超时(秒)\n"

#: term-utils/agetty.c:2515
msgid " -U, --detect-case          detect uppercase terminal\n"
msgstr " -U, --detect-case          检测纯大写终端\n"

#: term-utils/agetty.c:2516
msgid " -w, --wait-cr              wait carriage-return\n"
msgstr " -w, --wait-cr              等待回车\n"

#: term-utils/agetty.c:2517
msgid "     --nohints              do not print hints\n"
msgstr "     --nohints              不打印提示信息\n"

#: term-utils/agetty.c:2518
msgid "     --nohostname           no hostname at all will be shown\n"
msgstr "     --nohostname           将完全不显示主机名\n"

#: term-utils/agetty.c:2519
msgid "     --long-hostname        show full qualified hostname\n"
msgstr "     --long-hostname        显示完全限定主机名\n"

#: term-utils/agetty.c:2520
msgid "     --erase-chars <string> additional backspace chars\n"
msgstr "     --erase-chars <字符串> 附加的退格字符\n"

#: term-utils/agetty.c:2521
msgid "     --kill-chars <string>  additional kill chars\n"
msgstr "     --kill-chars <字符串>  附加的杀死(kill)字符\n"

#: term-utils/agetty.c:2522
msgid "     --chdir <directory>    chdir before the login\n"
msgstr "     --chdir <目录>         登录前切换目录(chdir)\n"

#: term-utils/agetty.c:2523
msgid "     --delay <number>       sleep seconds before prompt\n"
msgstr "     --delay <数字>         提示前睡眠的秒数\n"

#: term-utils/agetty.c:2524
msgid "     --nice <number>        run login with this priority\n"
msgstr "     --nice <数字>          以指定优先级运行 login\n"

#: term-utils/agetty.c:2525
msgid "     --reload               reload prompts on running agetty instances\n"
msgstr "     --reload               在运行 agetty 实例时重新载入提示\n"

#: term-utils/agetty.c:2526
msgid "     --list-speeds          display supported baud rates\n"
msgstr "     --list-speeds          显示支持的波特率\n"

#: term-utils/agetty.c:2874
#, c-format
msgid "%d user"
msgid_plural "%d users"
msgstr[0] "%d 位用户"

#: term-utils/agetty.c:3004
#, c-format
msgid "checkname failed: %m"
msgstr "checkname 失败：%m"

#: term-utils/agetty.c:3016
#, c-format
msgid "cannot touch file %s"
msgstr "无法 touch 文件 %s"

#: term-utils/agetty.c:3020
msgid "--reload is unsupported on your system"
msgstr "您的系统不支持 --reload"

#: term-utils/mesg.c:78
#, c-format
msgid " %s [options] [y | n]\n"
msgstr " %s [选项] [y | n]\n"

#: term-utils/mesg.c:81
msgid "Control write access of other users to your terminal.\n"
msgstr "控制其他用户对您终端的写权限。\n"

#: term-utils/mesg.c:84
msgid " -v, --verbose  explain what is being done\n"
msgstr " -v, --verbose  解释正在进行的操作\n"

#: term-utils/mesg.c:130
msgid "no tty"
msgstr "无 tty"

#: term-utils/mesg.c:139
#, c-format
msgid "ttyname() failed, attempting to go around using: %s"
msgstr "ttyname() 失败，尝试使用其它命令绕过：%s"

#: term-utils/mesg.c:146
msgid "is y"
msgstr "是 y"

#: term-utils/mesg.c:149
msgid "is n"
msgstr "是 n"

#: term-utils/mesg.c:165 term-utils/mesg.c:172
#, c-format
msgid "change %s mode failed"
msgstr "更改 %s 模式失败"

#: term-utils/mesg.c:167
msgid "write access to your terminal is allowed"
msgstr "对您的终端的写访问已被允许"

#: term-utils/mesg.c:174
msgid "write access to your terminal is denied"
msgstr "对您的终端的写访问已被拒绝"

#: term-utils/script.c:193
#, c-format
msgid " %s [options] [file]\n"
msgstr " %s [选项] [文件]\n"

#: term-utils/script.c:196
msgid "Make a typescript of a terminal session.\n"
msgstr "创建终端会话的打字稿（typescript）。\n"

#: term-utils/script.c:199
msgid " -I, --log-in <file>           log stdin to file\n"
msgstr " -I, --log-in <文件>           将标准输入记录到文件\n"

#: term-utils/script.c:200
msgid " -O, --log-out <file>          log stdout to file (default)\n"
msgstr " -O, --log-out <文件>          将标准输出记录到文件（默认）\n"

#: term-utils/script.c:201
msgid " -B, --log-io <file>           log stdin and stdout to file\n"
msgstr " -B, --log-io <文件>           将标准输入和标准输出记录到文件\n"

#: term-utils/script.c:204
msgid " -T, --log-timing <file>       log timing information to file\n"
msgstr " -T, --log-timing <文件>       将时序信息记录到文件\n"

#: term-utils/script.c:205
msgid " -t[<file>], --timing[=<file>] deprecated alias to -T (default file is stderr)\n"
msgstr " -t[<文件>], --timing[=<文件>] 到 -T 的已不建议使用的别名（默认文件为标准错误）\n"

#: term-utils/script.c:206
msgid " -m, --logging-format <name>   force to 'classic' or 'advanced' format\n"
msgstr " -m, --logging-format <名称>   强制使用“classic”或“advanced”格式\n"

#: term-utils/script.c:209
msgid " -a, --append                  append to the log file\n"
msgstr " -a, --append                  附加到日志文件\n"

#: term-utils/script.c:210
msgid " -c, --command <command>       run command rather than interactive shell\n"
msgstr " -c, --command <命令>          运行指定命令而非启动交互式 shell\n"

#: term-utils/script.c:211
msgid " -e, --return                  return exit code of the child process\n"
msgstr " -e, --return                  返回子进程的退出值\n"

#: term-utils/script.c:212
msgid " -f, --flush                   run flush after each write\n"
msgstr " -f, --flush                   每次写入后清空缓冲区\n"

#: term-utils/script.c:213
msgid "     --force                   use output file even when it is a link\n"
msgstr "     --force                   强制使用指定输出文件，无论目标文件是链接与否\n"

#: term-utils/script.c:214
#, fuzzy
#| msgid " -E, --echo <when>             echo input (auto, always or never)\n"
msgid " -E, --echo <when>             echo input in session (auto, always or never)\n"
msgstr " -E, --echo <时机>             回显输入（, always 或 never）\n"

#: term-utils/script.c:215
msgid " -o, --output-limit <size>     terminate if output files exceed size\n"
msgstr " -o, --output-limit <大小>     在输出文件超出指定大小时终止\n"

#: term-utils/script.c:216
msgid " -q, --quiet                   be quiet\n"
msgstr " -q, --quiet                   开启安静模式\n"

#: term-utils/script.c:299
#, c-format
msgid ""
"\n"
"Script done on %s [<%s>]\n"
msgstr ""
"\n"
"脚本完成于 %s [<%s>]\n"

#: term-utils/script.c:301
#, c-format
msgid ""
"\n"
"Script done on %s [COMMAND_EXIT_CODE=\"%d\"]\n"
msgstr ""
"\n"
"脚本完成于 %s [COMMAND_EXIT_CODE=\"%d\"]\n"

#: term-utils/script.c:399
#, c-format
msgid "Script started on %s ["
msgstr "脚本启动于 %s ["

#: term-utils/script.c:415
#, fuzzy, c-format
#| msgid "<not executed on terminal>"
msgid "%*s<not executed on terminal>"
msgstr "<未在终端上执行>"

#: term-utils/script.c:689
#, c-format
msgid "Script terminated, max output files size %<PRIu64> exceeded.\n"
msgstr "脚本已终止，已超过最大输出文件大小 %<PRIu64>。\n"

#: term-utils/script.c:691
msgid "max output size exceeded"
msgstr "超过了最大输出大小"

#: term-utils/script.c:752
#, c-format
msgid ""
"output file `%s' is a link\n"
"Use --force if you really want to use it.\n"
"Program not started."
msgstr ""
"输出文件“%s”是链接\n"
"如果真想用它，使用 --force 选项。\n"
"程序没有启动。"

#: term-utils/script.c:833
#, c-format
msgid "unssuported echo mode: '%s'"
msgstr "不支持的回显模式：“%s”"

#: term-utils/script.c:858
msgid "failed to parse output limit size"
msgstr "解析输出大小限制失败"

#: term-utils/script.c:869
#, c-format
msgid "unsupported logging format: '%s'"
msgstr "不支持的日志格式：“%s”"

#: term-utils/script.c:922
msgid "log multiple streams is mutually exclusive with 'classic' format"
msgstr "无法在使用“classic”（经典）格式时同时记录多个流"

#: term-utils/script.c:949
#, c-format
msgid "Script started"
msgstr "脚本已启动"

#: term-utils/script.c:951
#, c-format
msgid ", output log file is '%s'"
msgstr "，输出日志文件为“%s”"

#: term-utils/script.c:953
#, c-format
msgid ", input log file is '%s'"
msgstr "，输入日志文件为“%s”"

#: term-utils/script.c:955
#, c-format
msgid ", timing file is '%s'"
msgstr "，时序文件为“%s”"

#: term-utils/script.c:956
#, c-format
msgid ".\n"
msgstr "。\n"

#: term-utils/script.c:1065
#, c-format
msgid "Script done.\n"
msgstr "脚本已完成。\n"

#: term-utils/scriptlive.c:60
#, c-format
msgid " %s [-t] timingfile [-I|-B] typescript\n"
msgstr " %s [-t] timingfile [-I|-B] typescript\n"

#: term-utils/scriptlive.c:64
msgid "Execute terminal typescript.\n"
msgstr "执行终端打字稿（typescript）。\n"

#: term-utils/scriptlive.c:67 term-utils/scriptreplay.c:57
msgid " -t, --timing <file>     script timing log file\n"
msgstr " -t, --timing <文件>     script timing log file\n"

#: term-utils/scriptlive.c:68 term-utils/scriptreplay.c:58
msgid " -T, --log-timing <file> alias to -t\n"
msgstr " -T, --log-timing <文件> 等效于 -t\n"

#: term-utils/scriptlive.c:69 term-utils/scriptreplay.c:59
#, fuzzy
msgid " -I, --log-in <file>     script stdin log file\n"
msgstr " -I, --log-in <文件>     脚本标准输入日志文件\n"

#: term-utils/scriptlive.c:70 term-utils/scriptreplay.c:61
msgid " -B, --log-io <file>     script stdin and stdout log file\n"
msgstr ""

#: term-utils/scriptlive.c:73
#, fuzzy
#| msgid " -c, --command <command>  run a single command string through the shell\n"
msgid " -c, --command <command> run command rather than interactive shell\n"
msgstr " -c, --command <命令>      通过 shell 运行单个命令字符串\n"

#: term-utils/scriptlive.c:74 term-utils/scriptreplay.c:67
msgid " -d, --divisor <num>     speed up or slow down execution with time divisor\n"
msgstr ""

#: term-utils/scriptlive.c:75 term-utils/scriptreplay.c:68
#, fuzzy
#| msgid "     --delay <number>       sleep seconds before prompt\n"
msgid " -m, --maxdelay <num>    wait at most this many seconds between updates\n"
msgstr "     --delay <数字>         提示前睡眠的秒数\n"

#: term-utils/scriptlive.c:226 term-utils/scriptreplay.c:233
#, fuzzy
#| msgid "failed to parse argument"
msgid "failed to parse maximal delay argument"
msgstr "解析参数失败"

#: term-utils/scriptlive.c:249 term-utils/scriptreplay.c:274
msgid "timing file not specified"
msgstr "未指定时序文件"

#: term-utils/scriptlive.c:251
#, fuzzy
#| msgid "no input file specified"
msgid "stdin typescript file not specified"
msgstr "未指定输入文件"

#: term-utils/scriptlive.c:277
#, c-format
msgid ">>> scriptlive: Starting your typescript execution by %s.\n"
msgstr ""

#: term-utils/scriptlive.c:284
#, fuzzy
#| msgid "failed to allocate script handler"
msgid "failed to allocate PTY handler"
msgstr "分配脚本处理程序失败"

#: term-utils/scriptlive.c:365
#, c-format
msgid ""
"\n"
">>> scriptlive: done.\n"
msgstr ""

#: term-utils/scriptreplay.c:50
#, c-format
msgid " %s [-t] timingfile [typescript] [divisor]\n"
msgstr " %s [-t] timingfile [typescript] [divisor]\n"

#: term-utils/scriptreplay.c:54
msgid "Play back terminal typescripts, using timing information.\n"
msgstr "使用定时信息回话终端 typescript。\n"

#: term-utils/scriptreplay.c:60
msgid " -O, --log-out <file>    script stdout log file (default)\n"
msgstr ""

#: term-utils/scriptreplay.c:63
msgid " -s, --typescript <file> deprecated alias to -O\n"
msgstr " -s, --typescript <文件> 已不建议使用的 -O 的别名\n"

#: term-utils/scriptreplay.c:66
#, fuzzy
#| msgid " -V          display version information and exit\n"
msgid "     --summary           display overview about recorded session and exit\n"
msgstr " -V          显示版本信息并退出\n"

#: term-utils/scriptreplay.c:69
msgid " -x, --stream <name>     stream type (out, in, signal or info)\n"
msgstr " -x, --stream <name>     流类型（out, in, signal 或 info）\n"

#: term-utils/scriptreplay.c:70
msgid " -c, --cr-mode <type>    CR char mode (auto, never, always)\n"
msgstr " -c, --cr-mode <类型>    CR 字符模式（auto, never, always）\n"

#: term-utils/scriptreplay.c:131
msgid "unexpected tcgetattr failure"
msgstr "未预期的 tcgetattr 失败"

#: term-utils/scriptreplay.c:212
#, c-format
msgid "unsupported mode name: '%s'"
msgstr "不支持的模式名称：“%s”"

#: term-utils/scriptreplay.c:245
#, c-format
msgid "unsupported stream name: '%s'"
msgstr "不支持的流名称：“%s”"

#: term-utils/scriptreplay.c:276
msgid "data log file not specified"
msgstr "未指定数据日志文件"

#: term-utils/scriptreplay.c:330
#, c-format
msgid "%s: log file error"
msgstr "%s：日志文件错误"

#: term-utils/scriptreplay.c:332
#, c-format
msgid "%s: line %d: timing file error"
msgstr "%s：行 %d：时序文件错误"

#: term-utils/setterm.c:237
#, c-format
msgid "argument error: bright %s is not supported"
msgstr "参数错误：不支持亮度 %s"

#: term-utils/setterm.c:328
msgid "too many tabs"
msgstr "标签过多"

#: term-utils/setterm.c:384
msgid "Set the attributes of a terminal.\n"
msgstr "设置终端属性。\n"

#: term-utils/setterm.c:387
msgid " --term <terminal_name>        override TERM environment variable\n"
msgstr " --term <终端_名称>            替换 TERM 环境变量\n"

#: term-utils/setterm.c:388
#, fuzzy
#| msgid " --reset                           reset terminal to power-on state\n"
msgid " --reset                       reset terminal to power-on state\n"
msgstr " --reset                           重置端口到上电时的状态\n"

#: term-utils/setterm.c:389
#, fuzzy
#| msgid " --resize                          reset terminal rows and columns\n"
msgid " --resize                      reset terminal rows and columns\n"
msgstr " --resize                          重置终端行和列大小\n"

#: term-utils/setterm.c:390
#, fuzzy
#| msgid " --initialize                      display init string, and use default settings\n"
msgid " --initialize                  display init string, and use default settings\n"
msgstr " --initialize                      显示初始化字符串，并使用默认设置\n"

#: term-utils/setterm.c:391
msgid " --default                     use default terminal settings\n"
msgstr " --default                     使用默认终端设置\n"

#: term-utils/setterm.c:392
#, fuzzy
#| msgid " --store                           save current terminal settings as default\n"
msgid " --store                       save current terminal settings as default\n"
msgstr " --store                           将当前终端设置保存为默认值\n"

#: term-utils/setterm.c:395
#, fuzzy
#| msgid " --cursor        [on|off]          display cursor\n"
msgid " --cursor on|off               display cursor\n"
msgstr " --cursor        [on|off]          显示光标\n"

#: term-utils/setterm.c:396
#, fuzzy
#| msgid " --repeat        [on|off]          keyboard repeat\n"
msgid " --repeat on|off               keyboard repeat\n"
msgstr " --repeat        [on|off]          键盘重复\n"

#: term-utils/setterm.c:397
#, fuzzy
#| msgid " --appcursorkeys [on|off]          cursor key application mode\n"
msgid " --appcursorkeys on|off        cursor key application mode\n"
msgstr " --appcursorkeys [on|off]          光标键应用程序模式\n"

#: term-utils/setterm.c:398
#, fuzzy
#| msgid " --linewrap      [on|off]          continue on a new line when a line is full\n"
msgid " --linewrap on|off             continue on a new line when a line is full\n"
msgstr " --linewrap      [on|off]          一行满时在新行中继续\n"

#: term-utils/setterm.c:399
#, fuzzy
#| msgid " --inversescreen [on|off]          swap colors for the whole screen\n"
msgid " --inversescreen on|off        swap colors for the whole screen\n"
msgstr " --inversescreen [on|off]          交换整个屏幕的颜色\n"

#: term-utils/setterm.c:402
msgid " --msg on|off                  send kernel messages to console\n"
msgstr " --msg on|off                  将内核消息发送到控制台\n"

#: term-utils/setterm.c:403
msgid " --msglevel <0-8>              kernel console log level\n"
msgstr " --msglevel <0-8>              内核控制台日志记录级别\n"

#: term-utils/setterm.c:406
msgid " --foreground default|<color>  set foreground color\n"
msgstr " --foreground default|<颜色>   设置前景色\n"

#: term-utils/setterm.c:407
msgid " --background default|<color>  set background color\n"
msgstr " --background default|<颜色>   设置背景色\n"

#: term-utils/setterm.c:408
msgid " --ulcolor [bright] <color>    set underlined text color\n"
msgstr " --ulcolor [bright] <颜色>     设置下划线文本颜色\n"

#: term-utils/setterm.c:409
msgid " --hbcolor [bright] <color>    set half-bright text color\n"
msgstr " --hbcolor [bright] <颜色>     设置半亮度文本颜色\n"

#: term-utils/setterm.c:410
msgid "        <color>: black blue cyan green grey magenta red white yellow\n"
msgstr "         <颜色>：black blue cyan green grey magenta red white yellow\n"

#: term-utils/setterm.c:413
msgid " --bold on|off                 bold\n"
msgstr " --bold on|off                 粗体\n"

#: term-utils/setterm.c:414
msgid " --half-bright on|off          dim\n"
msgstr " --half-bright on|off          变暗\n"

#: term-utils/setterm.c:415
msgid " --blink on|off                blink\n"
msgstr " --blink on|off                闪烁\n"

#: term-utils/setterm.c:416
msgid " --underline on|off            underline\n"
msgstr " --underline on|off            下划线\n"

#: term-utils/setterm.c:417
msgid " --reverse  on|off             swap foreground and background colors\n"
msgstr " --reverse  on|off             交换前景色和背景色\n"

#: term-utils/setterm.c:420
msgid " --clear[=<all|rest>]          clear screen and set cursor position\n"
msgstr " --clear[=<all|rest>]          清屏并设置光标位置\n"

#: term-utils/setterm.c:421
#, fuzzy
#| msgid " --tabs          [<number>...]     set these tab stop positions, or show them\n"
msgid " --tabs[=<number>...]          set these tab stop positions, or show them\n"
msgstr " --tabs          [<数字>...]       设置这些制表位置，或显示制表位\n"

#: term-utils/setterm.c:422
#, fuzzy
#| msgid " --clrtabs       [<number>...]     clear these tab stop positions, or all\n"
msgid " --clrtabs[=<number>...]       clear these tab stop positions, or all\n"
msgstr " --clrtabs       [<数字>...]       清除这些或所有制表位\n"

#: term-utils/setterm.c:423
#, fuzzy
#| msgid " --regtabs       [1-160]           set a regular tab stop interval\n"
msgid " --regtabs[=1-160]             set a regular tab stop interval\n"
msgstr " --regtabs       [1-160]           设置常规的制表位间隔\n"

#: term-utils/setterm.c:424
#, fuzzy
#| msgid " --blank         [0-60|force|poke] set time of inactivity before screen blanks\n"
msgid " --blank[=0-60|force|poke]     set time of inactivity before screen blanks\n"
msgstr " --blank         [0-60|force|poke] 设置多久不活动后屏幕变空白\n"

#: term-utils/setterm.c:427
#, fuzzy
#| msgid " --dump          [<number>]        write vcsa<number> console dump to file\n"
msgid " --dump[=<number>]             write vcsa<number> console dump to file\n"
msgstr " --dump          [<数字>]          将 vcsa<数字> 终端转储到文件\n"

#: term-utils/setterm.c:428
#, fuzzy
#| msgid " --append        [<number>]        append vcsa<number> console dump to file\n"
msgid " --append <number>             append vcsa<number> console dump to file\n"
msgstr " --append        [<数字>]          将 vcsa<数字> 终端转储追加到文件\n"

#: term-utils/setterm.c:429
msgid " --file <filename>             name of the dump file\n"
msgstr " --file <文件名>               转储文件的名字\n"

#: term-utils/setterm.c:432
msgid " --powersave on|vsync|hsync|powerdown|off\n"
msgstr " --powersave on|vsync|hsync|powerdown|off\n"

#: term-utils/setterm.c:433
msgid "                               set vesa powersaving features\n"
msgstr "                               设置 vesa 节能功能\n"

#: term-utils/setterm.c:434
msgid " --powerdown[=<0-60>]          set vesa powerdown interval in minutes\n"
msgstr " --powerdown[=<0-60>]          设置 vesa 关闭电源间隔（分钟）\n"

#: term-utils/setterm.c:437
msgid " --blength[=<0-2000>]          duration of the bell in milliseconds\n"
msgstr " --blength[=<0-2000>]          响铃持续时间（毫秒）\n"

#: term-utils/setterm.c:438
msgid " --bfreq[=<number>]            bell frequency in Hertz\n"
msgstr " --bfreq[=<数字>]            响铃频率，单位为 Hz\n"

#: term-utils/setterm.c:451
msgid "duplicate use of an option"
msgstr "重复使用某选项"

#: term-utils/setterm.c:763
msgid "cannot force blank"
msgstr "无法强制清空(blank)"

#: term-utils/setterm.c:768
msgid "cannot force unblank"
msgstr "无法强制反清空(unblank)"

#: term-utils/setterm.c:774
msgid "cannot get blank status"
msgstr "无法获取空白状态"

#: term-utils/setterm.c:799
#, c-format
msgid "cannot open dump file %s for output"
msgstr "无法打开转储文件 %s 进行输出"

#: term-utils/setterm.c:840
#, c-format
msgid "terminal %s does not support %s"
msgstr "终端 %s 不支持 %s"

#: term-utils/setterm.c:878
msgid "select failed"
msgstr "select 失败"

#: term-utils/setterm.c:904
msgid "stdin does not refer to a terminal"
msgstr "标准输入并未指向一个终端"

#: term-utils/setterm.c:932
#, c-format
msgid "invalid cursor position: %s"
msgstr "无效的光标位置：%s"

#: term-utils/setterm.c:954
msgid "reset failed"
msgstr "reset 失败"

#: term-utils/setterm.c:1118
msgid "cannot (un)set powersave mode"
msgstr "无法设置或取消设置节能模式"

#: term-utils/setterm.c:1137 term-utils/setterm.c:1146
msgid "klogctl error"
msgstr "klogctl 出错"

#: term-utils/setterm.c:1167
msgid "$TERM is not defined."
msgstr "$TERM 未定义。"

#: term-utils/setterm.c:1174
msgid "terminfo database cannot be found"
msgstr "找不到 terminfo 数据库"

#: term-utils/setterm.c:1176
#, c-format
msgid "%s: unknown terminal type"
msgstr "%s：未知终端类型"

#: term-utils/setterm.c:1178
msgid "terminal is hardcopy"
msgstr "终端为硬拷贝(hardcopy)"

#: term-utils/ttymsg.c:81
#, c-format
msgid "internal error: too many iov's"
msgstr "内部错误：iov 过多"

#: term-utils/ttymsg.c:94
#, c-format
msgid "excessively long line arg"
msgstr "参数行超长"

#: term-utils/ttymsg.c:108
#, c-format
msgid "open failed"
msgstr "打开失败"

#: term-utils/ttymsg.c:147
#, c-format
msgid "fork: %m"
msgstr "fork：%m"

#: term-utils/ttymsg.c:149
#, c-format
msgid "cannot fork"
msgstr "无法 fork"

#: term-utils/ttymsg.c:182
#, c-format
msgid "%s: BAD ERROR, message is far too long"
msgstr "%s：严重错误，消息太长太长了"

#: term-utils/wall.c:89
#, c-format
msgid " %s [options] [<file> | <message>]\n"
msgstr " %s [选项] [<文件> | <消息>]\n"

#: term-utils/wall.c:92
msgid "Write a message to all users.\n"
msgstr "向所有用户发消息。\n"

#: term-utils/wall.c:95
#, fuzzy
#| msgid " -g, --group <group>             specify the primary group\n"
msgid " -g, --group <group>     only send message to group\n"
msgstr " -g, --group <组>                指定主组\n"

#: term-utils/wall.c:96
msgid " -n, --nobanner          do not print banner, works only for root\n"
msgstr " -n, --nobanner          不打印欢迎消息，只对 root 用户生效\n"

#: term-utils/wall.c:97
msgid " -t, --timeout <timeout> write timeout in seconds\n"
msgstr " -t, --timeout <超时>    写超时(秒)\n"

#: term-utils/wall.c:125
msgid "invalid group argument"
msgstr "无效的组参数"

#: term-utils/wall.c:127
#, c-format
msgid "%s: unknown gid"
msgstr "%s：未知的 gid"

#: term-utils/wall.c:170
msgid "getgrouplist found more groups than sysconf allows"
msgstr ""

#: term-utils/wall.c:216
msgid "--nobanner is available only for root"
msgstr "--nobanner 只有 root 能用"

#: term-utils/wall.c:221
#, c-format
msgid "invalid timeout argument: %s"
msgstr "无效的超时参数：%s"

#: term-utils/wall.c:293
msgid "cannot get passwd uid"
msgstr "无法获取 passwd uid"

#: term-utils/wall.c:317
#, c-format
msgid "Broadcast message from %s@%s (%s) (%s):"
msgstr "来自 %s@%s (%s) (%s) 的广播消息："

#: term-utils/wall.c:349
#, c-format
msgid "will not read %s - use stdin."
msgstr "将不读 %s - 使用 stdin。"

#: term-utils/write.c:87
#, c-format
msgid " %s [options] <user> [<ttyname>]\n"
msgstr " %s [选项] <用户> [<tty名称>]\n"

#: term-utils/write.c:91
msgid "Send a message to another user.\n"
msgstr "向另一个用户发送消息。\n"

#: term-utils/write.c:116
#, c-format
msgid "effective gid does not match group of %s"
msgstr "有效 gid 与组 %s 不匹配"

#: term-utils/write.c:201
#, c-format
msgid "%s is not logged in"
msgstr "%s 未登录"

#: term-utils/write.c:206
msgid "can't find your tty's name"
msgstr "找不到您的 tty 名称"

#: term-utils/write.c:211
#, c-format
msgid "%s has messages disabled"
msgstr "%s 禁用了消息"

#: term-utils/write.c:214
#, c-format
msgid "%s is logged in more than once; writing to %s"
msgstr "%s 登录了多次；将记入 %s"

#: term-utils/write.c:265
#, c-format
msgid "Message from %s@%s (as %s) on %s at %02d:%02d ..."
msgstr "%s@%s (作为 %s) 于 %s 在 %02d:%02d 发的消息..."

#: term-utils/write.c:269
#, c-format
msgid "Message from %s@%s on %s at %02d:%02d ..."
msgstr "%s@%s 于 %s 在 %02d:%02d 发的消息..."

#: term-utils/write.c:280
msgid "carefulputc failed"
msgstr "carefulputc 失败"

#: term-utils/write.c:318
msgid "you have write permission turned off"
msgstr "您关闭了写权限"

#: term-utils/write.c:341
#, c-format
msgid "%s is not logged in on %s"
msgstr "%s 未在 %s 上登录"

#: term-utils/write.c:347
#, c-format
msgid "%s has messages disabled on %s"
msgstr "%s 在 %s 上禁用了消息"

#: text-utils/col.c:174
#, fuzzy
#| msgid "Filter out reverse line feeds.\n"
msgid "Filter out reverse line feeds from standard input.\n"
msgstr "过滤反换行。\n"

#: text-utils/col.c:177
#, c-format
msgid ""
"\n"
"Options:\n"
" -b, --no-backspaces    do not output backspaces\n"
" -f, --fine             permit forward half line feeds\n"
" -p, --pass             pass unknown control sequences\n"
" -h, --tabs             convert spaces to tabs\n"
" -x, --spaces           convert tabs to spaces\n"
" -l, --lines NUM        buffer at least NUM lines\n"
msgstr ""
"\n"
"选项：\n"
" -b, --no-backspaces    不输出退格键(backspace)\n"
" -f, --fine             允许前进半行(forward half line feed)\n"
" -p, --pass             传递未知的控制序列\n"
" -h, --tabs             将空格转换为制表符\n"
" -x, --spaces           将制表符转换为空格\n"
" -l, --lines NUM        缓冲至少 NUM 行\n"

#: text-utils/col.c:496
#, c-format
msgid "warning: can't back up %s."
msgstr "警告：无法备份 %s。"

#: text-utils/col.c:498
msgid "past first line"
msgstr "越过第一行"

#: text-utils/col.c:499
msgid "-- line already flushed"
msgstr "-- 行已经被冲洗(flushed)"

#: text-utils/col.c:565
msgid "bad -l argument"
msgstr "-l 参数有误"

#: text-utils/colcrt.c:82 text-utils/column.c:748
#, c-format
msgid " %s [options] [<file>...]\n"
msgstr " %s [选项] [<文件>...]\n"

#: text-utils/colcrt.c:85
msgid "Filter nroff output for CRT previewing.\n"
msgstr "过滤 nroff 输出以便 CRT 预览。\n"

#: text-utils/colcrt.c:88
msgid " -,  --no-underlining    suppress all underlining\n"
msgstr " -,  --no-underlining    禁止所有下划线\n"

#: text-utils/colcrt.c:89
msgid " -2, --half-lines        print all half-lines\n"
msgstr " -2, --half-lines        打印所有半行\n"

#: text-utils/colrm.c:60
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [startcol [endcol]]\n"
msgstr ""
"\n"
"用法：\n"
" %s [起始列 [终止列]]\n"

#: text-utils/colrm.c:65
msgid "Filter out the specified columns.\n"
msgstr "过滤指定列。\n"

#: text-utils/colrm.c:69
#, c-format
msgid ""
"%s reads from standard input and writes to standard output\n"
"\n"
msgstr ""
"%s 读取标准输入并写入标准输出\n"
"\n"

#: text-utils/colrm.c:184
msgid "first argument"
msgstr "第一个参数"

#: text-utils/colrm.c:186
msgid "second argument"
msgstr "第二个参数"

#: text-utils/column.c:282
msgid "failed to parse column"
msgstr "解析列失败"

#: text-utils/column.c:291
#, c-format
msgid "undefined column name '%s'"
msgstr "未定义的列名称“%s”"

#: text-utils/column.c:403
msgid "failed to parse --table-order list"
msgstr "解析 --table-order 列表失败"

#: text-utils/column.c:481
msgid "failed to parse --table-hide list"
msgstr "解析 --table-hide 列表失败"

#: text-utils/column.c:485
msgid "failed to parse --table-right list"
msgstr "解析 --table-right 列表失败"

#: text-utils/column.c:489
msgid "failed to parse --table-trunc list"
msgstr "解析 --table-trunc 列表失败"

#: text-utils/column.c:493
msgid "failed to parse --table-noextreme list"
msgstr "解析 --table-noextreme 列表失败"

#: text-utils/column.c:497
msgid "failed to parse --table-wrap list"
msgstr "解析 --table-wrap 列表失败"

#: text-utils/column.c:549
#, c-format
msgid "line %zu: for JSON the name of the column %zu is required"
msgstr ""

#: text-utils/column.c:566
msgid "failed to allocate output data"
msgstr "分配输出数据失败"

#: text-utils/column.c:751
msgid "Columnate lists.\n"
msgstr "成列输出内容。\n"

#: text-utils/column.c:754
msgid " -t, --table                      create a table\n"
msgstr " -t, --table                      创建表格\n"

#: text-utils/column.c:755
#, fuzzy
#| msgid " -n, --name <progname>         the name under which errors are reported\n"
msgid " -n, --table-name <name>          table name for JSON output\n"
msgstr " -n, --name <progname>         要报告其错误的程序名称\n"

#: text-utils/column.c:756
#, fuzzy
#| msgid " -x, --sort <column>  sort output by <column>\n"
msgid " -O, --table-order <columns>      specify order of output columns\n"
msgstr " -x, --sort <列>      按<列>对输出排序\n"

#: text-utils/column.c:757
#, fuzzy
#| msgid " -n, --noheadings       don't print column headings\n"
msgid " -C, --table-column <properties>  define column\n"
msgstr " -n, --noheadings       不打印列标题\n"

#: text-utils/column.c:758
#, fuzzy
#| msgid " -o, --options <list>     comma-separated list of swap options\n"
msgid " -N, --table-columns <names>      comma separated columns names\n"
msgstr " -o, --options <列表>     以英文逗号分隔的 swap 选项\n"

#: text-utils/column.c:759
#, fuzzy
#| msgid " -t, --streams <number>    number of compression streams\n"
msgid " -l, --table-columns-limit <num>  maximal number of input columns\n"
msgstr " -t, --streams <数字>      压缩流数量\n"

#: text-utils/column.c:760
msgid " -E, --table-noextreme <columns>  don't count long text from the columns to column width\n"
msgstr ""

#: text-utils/column.c:761
#, fuzzy
#| msgid " -n, --noheadings          don't print headings\n"
msgid " -d, --table-noheadings           don't print header\n"
msgstr " -n, --noheadings          不打印标题\n"

#: text-utils/column.c:762
#, fuzzy
#| msgid " -a, --all              enter all namespaces\n"
msgid " -m, --table-maxout               fill all available space\n"
msgstr " -a, --all              进入所有名字空间\n"

#: text-utils/column.c:763
msgid " -e, --table-header-repeat        repeat header for each page\n"
msgstr ""

#: text-utils/column.c:764
#, fuzzy
#| msgid " -n, --noheadings       don't print column headings\n"
msgid " -H, --table-hide <columns>       don't print the columns\n"
msgstr " -n, --noheadings       不打印列标题\n"

#: text-utils/column.c:765
msgid " -R, --table-right <columns>      right align text in these columns\n"
msgstr ""

#: text-utils/column.c:766
#, fuzzy
#| msgid " -u, --notruncate       don't truncate text in columns\n"
msgid " -T, --table-truncate <columns>   truncate text in the columns when necessary\n"
msgstr " -u, --notruncate       不截断列中的文本\n"

#: text-utils/column.c:767
msgid " -W, --table-wrap <columns>       wrap text in the columns when necessary\n"
msgstr ""

#: text-utils/column.c:768
#, fuzzy
#| msgid " -L, --table-empty-lines          don't ignore empty lines\n"
msgid " -L, --keep-empty-lines           don't ignore empty lines\n"
msgstr " -L, --table-empty-lines          不要忽略空行\n"

#: text-utils/column.c:769
#, fuzzy
#| msgid " -J, --json                    use JSON --list output format\n"
msgid " -J, --json                       use JSON output format for table\n"
msgstr " -J, --json                    使用 JSON --list 输出格式\n"

#: text-utils/column.c:772
#, fuzzy
#| msgid " -O, --output <cols>           specify columns to output for --list\n"
msgid " -r, --tree <column>              column to use tree-like output for the table\n"
msgstr " -O, --output <列>           指定 --list 选项要输出的列\n"

#: text-utils/column.c:773
#, fuzzy
#| msgid " -i, --irq <num>              specify parallel port irq\n"
msgid " -i, --tree-id <column>           line ID to specify child-parent relation\n"
msgstr " -i, --irq <数字>             指定并口中断号\n"

#: text-utils/column.c:774
#, fuzzy
#| msgid " -N, --partno <num>        specify partition number\n"
msgid " -p, --tree-parent <column>       parent to specify child-parent relation\n"
msgstr " -N, --partno <数字>       指定分区号\n"

#: text-utils/column.c:777
#, fuzzy
#| msgid " -c, --columns <width>    width of output in number of characters\n"
msgid " -c, --output-width <width>       width of output in number of characters\n"
msgstr " -c, --columns <宽度>     输出宽度(字符数)\n"

#: text-utils/column.c:778
#, fuzzy
#| msgid ""
#| " -o, --output-separator <string>\n"
#| "                          columns separator for table output; default is two spaces\n"
msgid " -o, --output-separator <string>  columns separator for table output (default is two spaces)\n"
msgstr ""
" -o, --output-separator <字符串>\n"
"                          表格输出列分隔符，默认为两个空格\n"

#: text-utils/column.c:779
#, fuzzy
#| msgid " -s, --separator <string> possible table delimiters\n"
msgid " -s, --separator <string>         possible table delimiters\n"
msgstr " -s, --separator <字符串> 可用的表格分隔符\n"

#: text-utils/column.c:780
#, fuzzy
#| msgid " -x, --fillrows           fill rows before columns\n"
msgid " -x, --fillrows                   fill rows before columns\n"
msgstr " -x, --fillrows           先填充行，再填充列\n"

#: text-utils/column.c:861
msgid "invalid columns argument"
msgstr "无效的 列数 参数"

#: text-utils/column.c:887
#, fuzzy
#| msgid "invalid columns argument"
msgid "invalid columns limit argument"
msgstr "无效的 列数 参数"

#: text-utils/column.c:889
msgid "columns limit must be greater than zero"
msgstr ""

#: text-utils/column.c:892
msgid "failed to parse column names"
msgstr "解析列名称失败"

#: text-utils/column.c:919
#, fuzzy
#| msgid "failed to allocate iterator"
msgid "failed to use input separator"
msgstr "分配迭代器失败"

#: text-utils/column.c:952
msgid "options --tree-id and --tree-parent are required for tree formatting"
msgstr ""

#: text-utils/column.c:960
msgid "option --table required for all --table-*"
msgstr "所有 --table-* 均需要 --table 选项"

#: text-utils/column.c:963
#, fuzzy
#| msgid "option --table-columns required for --json"
msgid "option --table-columns or --table-column required for --json"
msgstr "使用 --json 需要 --table-columns 选项"

#: text-utils/hexdump.c:162 text-utils/more.c:237
#, c-format
msgid " %s [options] <file>...\n"
msgstr " %s [选项] <文件>...\n"

#: text-utils/hexdump.c:165
msgid "Display file contents in hexadecimal, decimal, octal, or ascii.\n"
msgstr "以十六进制、十进制、八进制、二进制或 ascii 显示文件内容。\n"

#: text-utils/hexdump.c:168
msgid " -b, --one-byte-octal      one-byte octal display\n"
msgstr " -b, --one-byte-octal      单字节八进制显示\n"

#: text-utils/hexdump.c:169
msgid " -c, --one-byte-char       one-byte character display\n"
msgstr " -c, --one-byte-char       单字节字符显示\n"

#: text-utils/hexdump.c:170
msgid " -C, --canonical           canonical hex+ASCII display\n"
msgstr " -C, --canonical           规范化 hex+ASCII 显示\n"

#: text-utils/hexdump.c:171
msgid " -d, --two-bytes-decimal   two-byte decimal display\n"
msgstr " -d, --two-bytes-decimal   双字节十进制显示\n"

#: text-utils/hexdump.c:172
msgid " -o, --two-bytes-octal     two-byte octal display\n"
msgstr " -o, --two-bytes-octal     双字节八进制显示\n"

#: text-utils/hexdump.c:173
msgid " -x, --two-bytes-hex       two-byte hexadecimal display\n"
msgstr " -x, --two-bytes-hex       双字节十六进制显示\n"

#: text-utils/hexdump.c:174
msgid " -L, --color[=<mode>]      interpret color formatting specifiers\n"
msgstr " -L, --color[=<模式>]      解释颜色格式化限定符\n"

#: text-utils/hexdump.c:177
msgid " -e, --format <format>     format string to be used for displaying data\n"
msgstr " -e, --format <格式>       用于显示数据的格式化字符串\n"

#: text-utils/hexdump.c:178
msgid " -f, --format-file <file>  file that contains format strings\n"
msgstr " -f, --format-file <文件>  包含格式字符串的文件\n"

#: text-utils/hexdump.c:179
msgid " -n, --length <length>     interpret only length bytes of input\n"
msgstr " -n, --length <长度>       只解释规定字节长度的输入\n"

#: text-utils/hexdump.c:180
msgid " -s, --skip <offset>       skip offset bytes from the beginning\n"
msgstr " -s, --skip <偏移>         跳过开头的指定字节偏移\n"

#: text-utils/hexdump.c:181
msgid " -v, --no-squeezing        output identical lines\n"
msgstr " -v, --no-squeezing        输出相同的行\n"

#: text-utils/hexdump.c:187
msgid "<length> and <offset>"
msgstr ""

#: text-utils/hexdump-display.c:366
msgid "all input file arguments failed"
msgstr "所有输入文件参数失败"

#: text-utils/hexdump-parse.c:55
#, c-format
msgid "bad byte count for conversion character %s"
msgstr "转换字符 %s 的转换字符计数错误"

#: text-utils/hexdump-parse.c:60
#, c-format
msgid "%%s requires a precision or a byte count"
msgstr "%%s 需要指定精度或字符计数"

#: text-utils/hexdump-parse.c:65
#, c-format
msgid "bad format {%s}"
msgstr "格式损坏 {%s}"

#: text-utils/hexdump-parse.c:70
#, c-format
msgid "bad conversion character %%%s"
msgstr "转换字符 %%%s 有误"

#: text-utils/hexdump-parse.c:440
msgid "byte count with multiple conversion characters"
msgstr "对字符计数使用了多个转换字符"

#: text-utils/line.c:34
msgid "Read one line.\n"
msgstr "读一行内容。\n"

#: text-utils/more.c:240
#, fuzzy
#| msgid "Discard the content of sectors on a device.\n"
msgid "Display the contents of a file in a terminal."
msgstr "丢弃一个设备上的扇区内容。\n"

#: text-utils/more.c:243
#, fuzzy
#| msgid " -d          display help instead of ringing bell\n"
msgid " -d, --silent          display help instead of ringing bell"
msgstr " -d          显示帮助而非响铃\n"

#: text-utils/more.c:244
#, fuzzy
#| msgid " -f          count logical rather than screen lines\n"
msgid " -f, --logical         count logical rather than screen lines"
msgstr " -f          计算逻辑行数，而非屏幕行数\n"

#: text-utils/more.c:245
#, fuzzy
#| msgid " -l          suppress pause after form feed\n"
msgid " -l, --no-pause        suppress pause after form feed"
msgstr " -l          屏蔽换页(form feed)后的暂停\n"

#: text-utils/more.c:246
#, fuzzy
#| msgid " -c          do not scroll, display text and clean line ends\n"
msgid " -c, --print-over      do not scroll, display text and clean line ends"
msgstr " -c          不滚动，显示文本并清理行末\n"

#: text-utils/more.c:247
#, fuzzy
#| msgid " -p          do not scroll, clean screen and display text\n"
msgid " -p, --clean-print     do not scroll, clean screen and display text"
msgstr " -p          不滚动，清除屏幕并显示文本\n"

#: text-utils/more.c:248
msgid " -e, --exit-on-eof     exit on end-of-file"
msgstr ""

#: text-utils/more.c:249
#, fuzzy
#| msgid " -s          squeeze multiple blank lines into one\n"
msgid " -s, --squeeze         squeeze multiple blank lines into one"
msgstr " -s          将多行空行压缩为一行\n"

#: text-utils/more.c:250
#, fuzzy
#| msgid " -u          suppress underlining\n"
msgid " -u, --plain           suppress underlining and bold"
msgstr " -u          屏蔽下划线\n"

#: text-utils/more.c:251
#, fuzzy
#| msgid " -<number>   the number of lines per screenful\n"
msgid " -n, --lines <number>  the number of lines per screenful"
msgstr " -<数字>     每屏的行数\n"

#: text-utils/more.c:252
#, fuzzy
#| msgid " -<number>              same as '-n <number>'\n"
msgid " -<number>             same as --lines"
msgstr " -<数字>                同“-n <数字>”\n"

#: text-utils/more.c:253
#, fuzzy
#| msgid " +<number>   display file beginning from line number\n"
msgid " +<number>             display file beginning from line number"
msgstr " +<数字>     从指定行开始显示文件\n"

#: text-utils/more.c:254
#, fuzzy
#| msgid " +/<string>  display file beginning from search string match\n"
msgid " +/<pattern>           display file beginning from pattern match"
msgstr " +/<字符串>  从匹配搜索字符串的位置开始显示文件\n"

#: text-utils/more.c:357
msgid "MORE environment variable"
msgstr "MORE 环境变量"

#: text-utils/more.c:410
msgid "magic failed"
msgstr "魔数校验失败"

#: text-utils/more.c:414 text-utils/more.c:433
#, c-format
msgid ""
"\n"
"******** %s: Not a text file ********\n"
"\n"
msgstr ""
"\n"
"******** %s：不是文本文件 ********\n"
"\n"

#: text-utils/more.c:467
#, c-format
msgid ""
"\n"
"*** %s: directory ***\n"
"\n"
msgstr ""
"\n"
"*** %s：目录 ***\n"
"\n"

#: text-utils/more.c:729
#, c-format
msgid "--More--"
msgstr "--更多--"

#: text-utils/more.c:731
#, c-format
msgid "(Next file: %s)"
msgstr "(下个文件：%s)"

#: text-utils/more.c:736 text-utils/more.c:742
#, c-format
msgid "(END)"
msgstr ""

#: text-utils/more.c:747
#, c-format
msgid "[Press space to continue, 'q' to quit.]"
msgstr "[按空格键继续，“q”键退出。]"

#: text-utils/more.c:949
msgid ""
"\n"
"...Skipping "
msgstr ""
"\n"
"...跳过 "

#: text-utils/more.c:953
msgid "...Skipping to file "
msgstr "...跳到文件 "

#: text-utils/more.c:955
msgid "...Skipping back to file "
msgstr "...将跳回文件 "

#: text-utils/more.c:1117
msgid "Line too long"
msgstr "行过长"

#: text-utils/more.c:1160
msgid "No previous command to substitute for"
msgstr "没有要替换的前一命令"

#: text-utils/more.c:1189
#, c-format
msgid "[Use q or Q to quit]"
msgstr "[使用 q 或 Q 退出]"

#: text-utils/more.c:1275
msgid "exec failed\n"
msgstr "exec 失败\n"

#: text-utils/more.c:1285
msgid "can't fork\n"
msgstr "无法 fork\n"

#: text-utils/more.c:1441
msgid "...skipping\n"
msgstr "...跳过\n"

#: text-utils/more.c:1478
msgid ""
"\n"
"Pattern not found\n"
msgstr ""
"\n"
"未找到模式\n"

#: text-utils/more.c:1482 text-utils/pg.c:1032 text-utils/pg.c:1180
msgid "Pattern not found"
msgstr "找不到模式"

#: text-utils/more.c:1500
#, fuzzy
#| msgid ""
#| "\n"
#| "Most commands optionally preceded by integer argument k.  Defaults in brackets.\n"
#| "Star (*) indicates argument becomes new default.\n"
msgid ""
"Most commands optionally preceded by integer argument k.  Defaults in brackets.\n"
"Star (*) indicates argument becomes new default.\n"
msgstr ""
"\n"
"多数命令可在前面加整数参数 k。方括号中为参数的默认值\n"
"星号(*)表示参数将成为新的默认值。\n"

#: text-utils/more.c:1506
#, fuzzy, c-format
#| msgid ""
#| "<space>                 Display next k lines of text [current screen size]\n"
#| "z                       Display next k lines of text [current screen size]*\n"
#| "<return>                Display next k lines of text [1]*\n"
#| "d or ctrl-D             Scroll k lines [current scroll size, initially 11]*\n"
#| "q or Q or <interrupt>   Exit from more\n"
#| "s                       Skip forward k lines of text [1]\n"
#| "f                       Skip forward k screenfuls of text [1]\n"
#| "b or ctrl-B             Skip backwards k screenfuls of text [1]\n"
#| "'                       Go to place where previous search started\n"
#| "=                       Display current line number\n"
#| "/<regular expression>   Search for kth occurrence of regular expression [1]\n"
#| "n                       Search for kth occurrence of last r.e [1]\n"
#| "!<cmd> or :!<cmd>       Execute <cmd> in a subshell\n"
#| "v                       Start up /usr/bin/vi at current line\n"
#| "ctrl-L                  Redraw screen\n"
#| ":n                      Go to kth next file [1]\n"
#| ":p                      Go to kth previous file [1]\n"
#| ":f                      Display current file name and line number\n"
#| ".                       Repeat previous command\n"
msgid ""
"<space>                 Display next k lines of text [current screen size]\n"
"z                       Display next k lines of text [current screen size]*\n"
"<return>                Display next k lines of text [1]*\n"
"d or ctrl-D             Scroll k lines [current scroll size, initially 11]*\n"
"q or Q or <interrupt>   Exit from more\n"
"s                       Skip forward k lines of text [1]\n"
"f                       Skip forward k screenfuls of text [1]\n"
"b or ctrl-B             Skip backwards k screenfuls of text [1]\n"
"'                       Go to place where previous search started\n"
"=                       Display current line number\n"
"/<regular expression>   Search for kth occurrence of regular expression [1]\n"
"n                       Search for kth occurrence of last r.e [1]\n"
"!<cmd> or :!<cmd>       Execute <cmd> in a subshell\n"
"v                       Start up '%s' at current line\n"
"ctrl-L                  Redraw screen\n"
":n                      Go to kth next file [1]\n"
":p                      Go to kth previous file [1]\n"
":f                      Display current file name and line number\n"
".                       Repeat previous command\n"
msgstr ""
"<空格键>                显示下 k 行文本[当前屏幕尺寸]\n"
"z                       显示下 k 行文本[当前屏幕尺寸]*\n"
"<回车键>                显示下 k 行文本[1]*\n"
"d 或 ctrl-D             滚动 k 行[当前滚动尺寸，初始值为 11]*\n"
"q 或 Q 或 <interrupt>   退出 more\n"
"s                       跳过下面 k 行文本[1]\n"
"f                       跳过下面 k 屏文本[1]\n"
"b 或 ctrl-B             跳过上面 k 屏文本 [1]\n"
"'                       转到上次搜索开始处\n"
"=                       显示当前行号\n"
"/<正则表达式>           搜索正则表达式第 k 次出现处[1]\n"
"n                       搜索前一正则表达式第 k 次出现处[1]\n"
"!<cmd> 或 :!<cmd>       在子 shell 中执行 <cmd> 命令\n"
"v                       在当前行启动 /usr/bin/vi\n"
"ctrl-L                  重绘屏幕\n"
":n                      转到后面第 k 个文件[1]\n"
":p                      转到前面第 k 个文件 [1]\n"
":f                      显示当前文件名和行号\n"
".                       重复前一命令\n"

#: text-utils/more.c:1572
#, c-format
msgid "...back %d page"
msgid_plural "...back %d pages"
msgstr[0] "...后退 %d 页"

#: text-utils/more.c:1596
#, c-format
msgid "...skipping %d line"
msgid_plural "...skipping %d lines"
msgstr[0] "...跳过 %d 行"

#: text-utils/more.c:1696
msgid ""
"\n"
"***Back***\n"
"\n"
msgstr ""
"\n"
"***后退***\n"
"\n"

#: text-utils/more.c:1715
#, c-format
msgid "\"%s\" line %d"
msgstr "“%s”第 %d 行"

#: text-utils/more.c:1718
#, c-format
msgid "[Not a file] line %d"
msgstr "[不是文件] 第 %d 行"

#: text-utils/more.c:1724
msgid "No previous regular expression"
msgstr "无上一个正则表达式"

#: text-utils/more.c:1793
#, c-format
msgid "[Press 'h' for instructions.]"
msgstr "[按“h”键获取说明。]"

#: text-utils/pg.c:152
msgid ""
"-------------------------------------------------------\n"
"  h                       this screen\n"
"  q or Q                  quit program\n"
"  <newline>               next page\n"
"  f                       skip a page forward\n"
"  d or ^D                 next halfpage\n"
"  l                       next line\n"
"  $                       last page\n"
"  /regex/                 search forward for regex\n"
"  ?regex? or ^regex^      search backward for regex\n"
"  . or ^L                 redraw screen\n"
"  w or z                  set page size and go to next page\n"
"  s filename              save current file to filename\n"
"  !command                shell escape\n"
"  p                       go to previous file\n"
"  n                       go to next file\n"
"\n"
"Many commands accept preceding numbers, for example:\n"
"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first page).\n"
"\n"
"See pg(1) for more information.\n"
"-------------------------------------------------------\n"
msgstr ""
"-------------------------------------------------------\n"
"  h                       此屏幕\n"
"  q 或 Q                  退出程序\n"
"  <换行>                  下一页\n"
"  f                       跳过下一页\n"
"  d 或 ^D                 下半页\n"
"  l                       下一行\n"
"  $                       上一页\n"
"  /表达式/                往前搜索正则表达式\n"
"  ?表达式? 或 ^表达式^    往回搜索正则表达式\n"
"  . 或 ^L                 重绘屏幕\n"
"  w 或 z                  设置页尺寸并转到下一页\n"
"  s filename              以 filename 为名字保存当前文件\n"
"  !command                shell 转义\n"
"  p                       转到前一文件\n"
"  n                       转到下一文件\n"
"\n"
"很多命令前接受数字参数，如：\n"
"+1<换行> (下一页); -1<换行> (上一页); 1<换行> (第一页)。\n"
"\n"
"更多信息请参阅 pg(1)。\n"
"-------------------------------------------------------\n"

#: text-utils/pg.c:231
#, c-format
msgid " %s [options] [+line] [+/pattern/] [files]\n"
msgstr " %s [选项] [+行] [+/模式/] [文件]\n"

#: text-utils/pg.c:235
msgid "Browse pagewise through text files.\n"
msgstr "逐页查看文本文件。\n"

#: text-utils/pg.c:238
msgid " -number      lines per page\n"
msgstr " -number      每页的行数\n"

#: text-utils/pg.c:239
msgid " -c           clear screen before displaying\n"
msgstr " -c           显示前清屏\n"

#: text-utils/pg.c:240
msgid " -e           do not pause at end of a file\n"
msgstr " -e           不在文件末尾暂停\n"

#: text-utils/pg.c:241
msgid " -f           do not split long lines\n"
msgstr " -f           不分割长行\n"

#: text-utils/pg.c:242
msgid " -n           terminate command with new line\n"
msgstr " -n           用换行符(new line)终止命令\n"

#: text-utils/pg.c:243
msgid " -p <prompt>  specify prompt\n"
msgstr " -p <提示>    指定提示语\n"

#: text-utils/pg.c:244
msgid " -r           disallow shell escape\n"
msgstr " -r           禁止 shell 转义\n"

#: text-utils/pg.c:245
msgid " -s           print messages to stdout\n"
msgstr " -s           向标准输出打印消息\n"

#: text-utils/pg.c:246
msgid " +number      start at the given line\n"
msgstr " +数字        从指定行开始\n"

#: text-utils/pg.c:247
msgid " +/pattern/   start at the line containing pattern\n"
msgstr " +/模式/      从包含 模式 的行开始\n"

#: text-utils/pg.c:258
#, c-format
msgid "option requires an argument -- %s"
msgstr "选项需要一个参数 -- %s"

#: text-utils/pg.c:264
#, c-format
msgid "illegal option -- %s"
msgstr "非法的参数 -- %s"

#: text-utils/pg.c:366
msgid "...skipping forward\n"
msgstr "...前进\n"

#: text-utils/pg.c:368
msgid "...skipping backward\n"
msgstr "...后退\n"

#: text-utils/pg.c:384
msgid "No next file"
msgstr "无下一个文件"

#: text-utils/pg.c:388
msgid "No previous file"
msgstr "无上一个文件"

#: text-utils/pg.c:887
#, c-format
msgid "Read error from %s file"
msgstr "从 %s 文件读出错"

#: text-utils/pg.c:890
#, c-format
msgid "Unexpected EOF in %s file"
msgstr "在 %s 文件中遇到异常 EOF"

#: text-utils/pg.c:892
#, c-format
msgid "Unknown error in %s file"
msgstr "在 %s 文件中遇到未知错误"

#: text-utils/pg.c:945
msgid "Cannot create temporary file"
msgstr "无法创建临时文件"

#: text-utils/pg.c:954 text-utils/pg.c:1121 text-utils/pg.c:1147
msgid "RE error: "
msgstr "表达式错误："

#: text-utils/pg.c:1104
msgid "(EOF)"
msgstr "(文件末尾)"

#: text-utils/pg.c:1129 text-utils/pg.c:1155
msgid "No remembered search string"
msgstr "没有记忆的搜索字符串"

#: text-utils/pg.c:1210
msgid "cannot open "
msgstr "打不开 "

#: text-utils/pg.c:1262
msgid "saved"
msgstr "已保存"

#: text-utils/pg.c:1352
msgid ": !command not allowed in rflag mode.\n"
msgstr ": !命令 在 rflag 模式下不许使用。\n"

#: text-utils/pg.c:1386
msgid "fork() failed, try again later\n"
msgstr "fork() 失败，请稍后重试\n"

#: text-utils/pg.c:1474
msgid "(Next file: "
msgstr "(下个文件："

#: text-utils/pg.c:1540
#, c-format
msgid "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"
msgstr "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"

#: text-utils/pg.c:1593 text-utils/pg.c:1666
msgid "failed to parse number of lines per page"
msgstr "解析每页的行数失败"

#: text-utils/rev.c:75
#, c-format
msgid "Usage: %s [options] [file ...]\n"
msgstr "用法：%s [选项] [文件 ...]\n"

#: text-utils/rev.c:79
msgid "Reverse lines characterwise.\n"
msgstr "对成行的内容逐字翻转。\n"

#: text-utils/ul.c:123
#, c-format
msgid " %s [options] [<file> ...]\n"
msgstr " %s [选项] [<文件> ...]\n"

#: text-utils/ul.c:126
msgid "Do underlining.\n"
msgstr "加下划线。\n"

#: text-utils/ul.c:129
msgid " -t, -T, --terminal TERMINAL  override the TERM environment variable\n"
msgstr " -t, -T, --terminal TERMINAL  用 TERMINAL 覆盖 TERM 环境变量的值\n"

#: text-utils/ul.c:130
msgid " -i, --indicated              underlining is indicated via a separate line\n"
msgstr " -i, --indicated              通过单独一行表示下划线\n"

#: text-utils/ul.c:503
#, c-format
msgid "unknown escape sequence in input: %o, %o"
msgstr "输入中有未知转义序列：%o，%o"

#: text-utils/ul.c:618
msgid "trouble reading terminfo"
msgstr "读取终端信息出错"

#: text-utils/ul.c:622
#, c-format
msgid "terminal `%s' is not known, defaulting to `dumb'"
msgstr "终端“%s”未知，将使用默认值“dumb”"

#, c-format
#~ msgid "chown failed: %s"
#~ msgstr "chown 失败：%s"

#, c-format
#~ msgid "waitpid failed (%s)"
#~ msgstr "waitpid 失败(%s)"

#, c-format
#~ msgid "Interrupted %s"
#~ msgstr "中断的 %s"

#, fuzzy
#~| msgid " -u, --notruncate       don't truncate text in columns\n"
#~ msgid " -u, --notruncate      don't truncate text in columns\n"
#~ msgstr " -u, --notruncate       不截断列中的文本\n"

#, c-format
#~ msgid "%s: BLKZEROOUT ioctl failed"
#~ msgstr "%s: BLKZEROOUT ioctl 失败"

#, c-format
#~ msgid "%s: BLKSECDISCARD ioctl failed"
#~ msgstr "%s：BLKSECDISCARD ioctl 失败"

#, c-format
#~ msgid "%s: BLKDISCARD ioctl failed"
#~ msgstr "%s：BLKDISCARD ioctl 失败"

#, c-format
#~ msgid ""
#~ " -a, --all               mount all filesystems mentioned in fstab\n"
#~ " -c, --no-canonicalize   don't canonicalize paths\n"
#~ " -f, --fake              dry run; skip the mount(2) syscall\n"
#~ " -F, --fork              fork off for each device (use with -a)\n"
#~ " -T, --fstab <path>      alternative file to /etc/fstab\n"
#~ msgstr ""
#~ " -a, --all               挂载 fstab 中的所有文件系统\n"
#~ " -c, --no-canonicalize   不对路径规范化\n"
#~ " -f, --fake              空运行；跳过 mount(2) 系统调用\n"
#~ " -F, --fork              对每个设备禁用 fork(和 -a 选项一起使用)\n"
#~ " -T, --fstab <路径>      /etc/fstab 的替代文件\n"

#, c-format
#~ msgid ""
#~ " -o, --options <list>    comma-separated list of mount options\n"
#~ " -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
#~ " -r, --read-only         mount the filesystem read-only (same as -o ro)\n"
#~ " -t, --types <list>      limit the set of filesystem types\n"
#~ msgstr ""
#~ " -o, --options <列表>    挂载选项列表，以英文逗号分隔\n"
#~ " -O, --test-opts <列表>  限制文件系统集合(和 -a 选项一起使用)\n"
#~ " -r, --read-only         以只读方式挂载文件系统(同 -o ro)\n"
#~ " -t, --types <列表>      限制文件系统类型集合\n"

#, fuzzy, c-format
#~| msgid ""
#~| "\n"
#~| "Source:\n"
#~| " -L, --label <label>     synonym for LABEL=<label>\n"
#~| " -U, --uuid <uuid>       synonym for UUID=<uuid>\n"
#~| " LABEL=<label>           specifies device by filesystem label\n"
#~| " UUID=<uuid>             specifies device by filesystem UUID\n"
#~| " PARTLABEL=<label>       specifies device by partition label\n"
#~| " PARTUUID=<uuid>         specifies device by partition UUID\n"
#~ msgid ""
#~ "\n"
#~ "Source:\n"
#~ " -L, --label <label>     synonym for LABEL=<label>\n"
#~ " -U, --uuid <uuid>       synonym for UUID=<uuid>\n"
#~ " LABEL=<label>           specifies device by filesystem label\n"
#~ " UUID=<uuid>             specifies device by filesystem UUID\n"
#~ " PARTLABEL=<label>       specifies device by partition label\n"
#~ " PARTUUID=<uuid>         specifies device by partition UUID\n"
#~ " ID=<id>                 specifies device by udev hardware ID\n"
#~ msgstr ""
#~ "\n"
#~ "源：\n"
#~ " -L, --label <标签>      同 LABEL=<label>\n"
#~ " -U, --uuid <uuid>       同 UUID=<uuid>\n"
#~ " LABEL=<标签>            按文件系统标签指定设备\n"
#~ " UUID=<uuid>             按文件系统 UUID 指定设备\n"
#~ " PARTLABEL=<标签>        按分区标签指定设备\n"
#~ " PARTUUID=<uuid>         按分区 UUID 指定设备\n"

#, c-format
#~ msgid ""
#~ " <device>                specifies device by path\n"
#~ " <directory>             mountpoint for bind mounts (see --bind/rbind)\n"
#~ " <file>                  regular file for loopdev setup\n"
#~ msgstr ""
#~ " <设备>                  按路径指定设备\n"
#~ " <目录>                  绑定式挂载的挂载点(参阅 --bind/rbind)\n"
#~ " <文件>                  用于设置回环设备的常规文件\n"

#, c-format
#~ msgid ""
#~ "\n"
#~ "Operations:\n"
#~ " -B, --bind              mount a subtree somewhere else (same as -o bind)\n"
#~ " -M, --move              move a subtree to some other place\n"
#~ " -R, --rbind             mount a subtree and all submounts somewhere else\n"
#~ msgstr ""
#~ "\n"
#~ "操作：\n"
#~ " -B, --bind              挂载其他位置的子树(同 -o bind)\n"
#~ " -M, --move              将子树移动到其他位置\n"
#~ " -R, --rbind             挂载其他位置的子树及其包含的所有子挂载(submount)\n"

#, c-format
#~ msgid ""
#~ " --make-shared           mark a subtree as shared\n"
#~ " --make-slave            mark a subtree as slave\n"
#~ " --make-private          mark a subtree as private\n"
#~ " --make-unbindable       mark a subtree as unbindable\n"
#~ msgstr ""
#~ " --make-shared           将子树标记为 共享\n"
#~ " --make-slave            将子树标记为 从属\n"
#~ " --make-private          将子树标记为 私有\n"
#~ " --make-unbindable       将子树标记为 不可绑定\n"

#, c-format
#~ msgid ""
#~ " --make-rshared          recursively mark a whole subtree as shared\n"
#~ " --make-rslave           recursively mark a whole subtree as slave\n"
#~ " --make-rprivate         recursively mark a whole subtree as private\n"
#~ " --make-runbindable      recursively mark a whole subtree as unbindable\n"
#~ msgstr ""
#~ " --make-rshared          递归地将整个子树标记为 共享\n"
#~ " --make-rslave           递归地将整个子树标记为 从属\n"
#~ " --make-rprivate         递归地将整个子树标记为 私有\n"
#~ " --make-runbindable      递归地将整个子树标记为 不可绑定\n"

#, fuzzy
#~| msgid "A file perusal filter for CRT viewing.\n"
#~ msgid "A file perusal filter for CRT viewing."
#~ msgstr "适合屏幕查看的文件阅读输出工具。\n"

#, fuzzy
#~| msgid "partitions: %d"
#~ msgid "Comparing %s to %s"
#~ msgstr "分区数：%d"

#, fuzzy
#~| msgid "closing %s failed"
#~ msgid "Visiting %s (file %zu)"
#~ msgstr "关闭 %s 失败"

#~ msgid " -v, --verbose        display more details"
#~ msgstr " -v, --verbose        显示更多细节"

#~ msgid " %s [options] COMMAND\n"
#~ msgstr " %s [选项] 命令\n"

#~ msgid ""
#~ "\n"
#~ "General Options:\n"
#~ msgstr ""
#~ "\n"
#~ "常规选项：\n"

#~ msgid ""
#~ "\n"
#~ "Resources Options:\n"
#~ msgstr ""
#~ "\n"
#~ "资源选项：\n"

#~ msgid "cannot stat %s"
#~ msgstr "无法 stat %s"

#~ msgid "pipe failed"
#~ msgstr "pipe 失败"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -c, --check               check bad blocks before creating the swap area\n"
#~ " -f, --force               allow swap size area be larger than device\n"
#~ " -p, --pagesize SIZE       specify page size in bytes\n"
#~ " -L, --label LABEL         specify label\n"
#~ " -v, --swapversion NUM     specify swap-space version number\n"
#~ " -U, --uuid UUID           specify the uuid to use\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ " -c, --check               创建交换区前检查坏块\n"
#~ " -f, --force               允许交换区大于设备大小\n"
#~ " -p, --pagesize SIZE       指定页大小为 SIZE 字节\n"
#~ " -L, --label LABEL         指定标签为 LABEL\n"
#~ " -v, --swapversion NUM     指定交换空间版本号为 NUM\n"
#~ " -U, --uuid UUID           指定要使用的 UUID\n"

#~ msgid "unable to matchpathcon()"
#~ msgstr "无法执行 matchpathcon()"

#~ msgid " -v, --verbose          print summary after hardlinking"
#~ msgstr " -v, --verbose          硬链接后输出简要信息"

#~ msgid " -vv                    print every hardlinked file and summary"
#~ msgstr " -vv                    输出每一个硬链接的文件及其简要信息"

#~ msgid " -f, --force            force hardlinking across filesystems"
#~ msgstr " -f, --force            强制跨文件系统进行硬链接"

#~ msgid "integer overflow"
#~ msgstr "整数溢出"

#, fuzzy
#~| msgid "failed to change directory to %s"
#~ msgid "file %s changed underneath us"
#~ msgstr "将目录更改到 %s 失败"

#~ msgid "failed to remove temporary link %s"
#~ msgstr "移除临时链接 %s 失败"

#~ msgid " %s %s to %s\n"
#~ msgstr " %s %s 到 %s\n"

#~ msgid "would save"
#~ msgstr "将要保存"

#~ msgid "option --exclude not supported (built without pcre2)"
#~ msgstr "不支持 --exclude 选项（构建时未配置使用 pcre2）"

#, fuzzy
#~| msgid "%s: parse error at line %d"
#~ msgid "pattern error at offset %d: %s"
#~ msgstr "%s：第 %d 行解析出错"

#~ msgid "Skipping %s%s\n"
#~ msgstr "跳过 %s%s\n"

#~ msgid "--reset-on-fork option is supported for SCHED_FIFO and SCHED_RR policies only"
#~ msgstr "--reset-on-fork 选项只支持 SCHED_FIFO and SCHED_RR 策略"

#~ msgid "CPU MHz:"
#~ msgstr "CPU MHz："

#~ msgid "libcap-ng is too old for \"all\" caps"
#~ msgstr "对于“all”权能，libcap-ng 太旧"

#~ msgid "Filename"
#~ msgstr "文件名"

#~ msgid "umount %s failed"
#~ msgstr "卸载 %s 失败"

#~ msgid "failed on line %d"
#~ msgstr "在 %d 行失败"

#~ msgid "Input line too long."
#~ msgstr "输入行过长。"

#~ msgid "%s: failed to read partition start from sysfs"
#~ msgstr "%s：读取从 sysfs 起始的分区失败"

#~ msgid "All logical partitions are in use. Adding a primary partition."
#~ msgstr "所有逻辑分区都在使用中。将添加一个主分区。"

#, fuzzy
#~| msgid "%s: BLKSSZGET ioctl failed"
#~ msgid "%s: BLKRESETZONE ioctl failed"
#~ msgstr "%s：BLKSSZGET ioctl 失败"

#, fuzzy
#~| msgid " -a, --all           trim all mounted filesystems that are supported\n"
#~ msgid " -a, --all           trim all supported mounted filesystems\n"
#~ msgstr " -a, --all           修剪不支持的所有已挂载文件系统\n"

#, fuzzy
#~| msgid " -S, --setuid <uid>     set uid in entered namespace\n"
#~ msgid " -S, --setuid <uid>\t    set uid in entered namespace\n"
#~ msgstr " -S, --setuid <uid>     设置进入空间中的 uid\n"

#, fuzzy
#~| msgid " -G, --setgid <gid>     set gid in entered namespace\n"
#~ msgid " -G, --setgid <gid>\t    set gid in entered namespace\n"
#~ msgstr " -G, --setgid <gid>     设置进入名字空间中的 gid\n"

#~ msgid "options --map-root-user and --map-current-user are mutually exclusive"
#~ msgstr "--map-root-user 选项和 --map-current-user 选项是互斥的"

#, fuzzy
#~| msgid "options --setgroups=allow and --map-root-user are mutually exclusive"
#~ msgid "options --setgroups=allow and --map-current-user are mutually exclusive"
#~ msgstr "--setgroups=allow 和 --map-root-user 选项是互斥的"

#~ msgid " -T, --log-timing <file> aliast to -t\n"
#~ msgstr " -T, --log-timing <文件> 到 -t 的别名\n"

#~ msgid "unknown option -%s"
#~ msgstr "未知选项 -%s"

#~ msgid "  Overflow\n"
#~ msgstr "  上溢\n"

#~ msgid "The old %s signature will be removed by a write command."
#~ msgstr "写入命令将移除旧签名 %s。"

#~ msgid ""
#~ "\n"
#~ "Do you really want to quit? "
#~ msgstr ""
#~ "\n"
#~ "您确实要退出吗？"

#~ msgid ""
#~ "usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
#~ " -v         be verbose\n"
#~ " -E         make all warnings errors (non-zero exit status)\n"
#~ " -b blksize use this blocksize, must equal page size\n"
#~ " -e edition set edition number (part of fsid)\n"
#~ " -N endian  set cramfs endianness (big|little|host), default host\n"
#~ " -i file    insert a file image into the filesystem\n"
#~ " -n name    set name of cramfs filesystem\n"
#~ " -p         pad by %d bytes for boot code\n"
#~ " -s         sort directory entries (old option, ignored)\n"
#~ " -z         make explicit holes\n"
#~ " dirname    root of the filesystem to be compressed\n"
#~ " outfile    output file\n"
#~ msgstr ""
#~ "用法：%s [-h] [-v] [-b 块大小] [-e 版本] [-N 大小端] [-i 文件] [-n 名称] 目录名 输出文件\n"
#~ " -v         详尽模式\n"
#~ " -E         将所有警告视为错误(退出状态码非 0)\n"
#~ " -b 块大小  使用指定的块大小，必须与页大小相同\n"
#~ " -e 版本    设置修订版本号（fsid 的一部分）\n"
#~ " -N 大小端  设置 cramfs 大小端（big|little|host），默认为 host\n"
#~ " -i 文件    将文件镜像插入文件系统\n"
#~ " -n 名称    设置 cramfs 文件系统名称\n"
#~ " -p         为引导代码填充 %d 字节\n"
#~ " -s         对目录记录进行排序（旧选项，会被忽略）\n"
#~ " -z         产生显式空洞\n"
#~ " 目录名     要压缩的文件系统的根目录\n"
#~ " 输出文件   输出文件\n"

#~ msgid " old start: %ju, new start: %ju (move %ju sectors)\n"
#~ msgstr " 原起点：%ju，新起点：%ju (移动 %ju 个扇区)\n"

#~ msgid "Rufus alignment"
#~ msgstr "Rufus 对齐"

#~ msgid "user %s does not exist"
#~ msgstr "用户 %s 不存在"

#~ msgid "only root can use \"--%s\" option (effective UID is %u)"
#~ msgstr "只有 root 用户能使用“--%s”选项(有效 UID 是 %u)"

#~ msgid "only root can do that (effective UID is %u)"
#~ msgstr "只有 root 用户能执行该操作(有效 UID 为 %u)"

#~ msgid "only root can use \"--%s\" option"
#~ msgstr "只有 root 用户能使用“--%s”选项"

#~ msgid "only root can do that"
#~ msgstr "只有 root 能执行该操作"

#, fuzzy
#~| msgid ""
#~| " -a, --append            append the output\n"
#~| " -c, --command <command> run command rather than interactive shell\n"
#~| " -e, --return            return exit code of the child process\n"
#~| " -f, --flush             run flush after each write\n"
#~| "     --force             use output file even when it is a link\n"
#~| " -q, --quiet             be quiet\n"
#~| " -t, --timing[=<file>]   output timing data to stderr (or to FILE)\n"
#~| " -V, --version           output version information and exit\n"
#~| " -h, --help              display this help and exit\n"
#~| "\n"
#~ msgid ""
#~ " -a, --append                  append the output\n"
#~ " -c, --command <command>       run command rather than interactive shell\n"
#~ " -e, --return                  return exit code of the child process\n"
#~ " -f, --flush                   run flush after each write\n"
#~ "     --force                   use output file even when it is a link\n"
#~ " -o, --output-limit <size>     terminate if output files exceed size\n"
#~ " -q, --quiet                   be quiet\n"
#~ " -t[<file>], --timing[=<file>] output timing data to stderr or to FILE\n"
#~ msgstr ""
#~ " -a, --append            追加输出\n"
#~ " -c, --command <命令>    运行命令而不是交互式 shell\n"
#~ " -e, --return            返回子进程的退出代码\n"
#~ " -f, --flush             每次 write(写) 后运行 flush(冲刷)\n"
#~ "     --force             即使输出文件是链接也依然使用\n"
#~ " -q, --quiet             安静模式\n"
#~ " -t, --timing[=<文件>]   将时间数据输出到标准错误(或文件)\n"
#~ " -V, --version           输出版本信息并退出\n"
#~ " -h, --help              显示此帮助并退出\n"
#~ "\n"

#~ msgid "cannot write script file"
#~ msgstr "无法写脚本文件"

#~ msgid ""
#~ "\n"
#~ "Session terminated.\n"
#~ msgstr ""
#~ "\n"
#~ "会话已终止。\n"

#~ msgid "openpty failed"
#~ msgstr "openpty 失败"

#~ msgid "out of pty's"
#~ msgstr "pty 的输出"

#~ msgid "Script started, file is %s\n"
#~ msgstr "脚本已启动，文件为 %s\n"

#, fuzzy
#~| msgid ""
#~| " -t, --timing <file>     script timing output file\n"
#~| " -s, --typescript <file> script terminal session output file\n"
#~| " -d, --divisor <num>     speed up or slow down execution with time divisor\n"
#~| " -m, --maxdelay <num>    wait at most this many seconds between updates\n"
#~| " -V, --version           output version information and exit\n"
#~| " -h, --help              display this help and exit\n"
#~| "\n"
#~ msgid ""
#~ " -t, --timing <file>     script timing output file\n"
#~ " -s, --typescript <file> script terminal session output file\n"
#~ " -d, --divisor <num>     speed up or slow down execution with time divisor\n"
#~ " -m, --maxdelay <num>    wait at most this many seconds between updates\n"
#~ msgstr ""
#~ " -t, --timing <文件>     脚本时序输出文件\n"
#~ " -s, --typescript <文件> 脚本终端会话输出文件\n"
#~ " -d, --divisor <数字>    用时间除数加速或减速执行\n"
#~ " -m, --maxdelay <数字>   在更新之间最多等待这么多秒\n"
#~ " -V, --version           输出版本信息并退出\n"
#~ " -h, --help              显示此帮助并退出\n"
#~ "\n"

#~ msgid "write to stdout failed"
#~ msgstr "写 stdout 失败"

#~ msgid "failed to read typescript file %s"
#~ msgstr "读 typescript 文件 %s 失败"

#~ msgid "wrong number of arguments"
#~ msgstr "参数个数不正确"

#~ msgid "timing file %s: line %lu: unexpected format"
#~ msgstr "定时文件 %s：第 %lu 行：格式异常。"

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %1$s -V\n"
#~ " %1$s --report [devices]\n"
#~ " %1$s [-v|-q] commands devices\n"
#~ "\n"
#~ "Available commands:\n"
#~ msgstr ""
#~ "\n"
#~ "用法：\n"
#~ " %1$s -V\n"
#~ " %1$s --report [设备]\n"
#~ " %1$s [-v|-q] 命令 设备\n"
#~ "\n"
#~ "可用命令有：\n"

#~ msgid "%15s: %s"
#~ msgstr "%15s: %s"

#~ msgid "Device %s already contains a %s signature."
#~ msgstr "设备 %s 已包含一个 %s 签名。"

#~ msgid "Geometry"
#~ msgstr "几何属性"

#~ msgid "seek error on %s"
#~ msgstr "%s 定位出错"

#~ msgid ""
#~ " -V, --version      display version information and exit;\n"
#~ "                      -V as --version must be the only option\n"
#~ msgstr ""
#~ " -V, --version      显示版本信息并退出\n"
#~ "                      将 -V 作为 --version 选项时必须是惟一选项\n"

#~ msgid " -h, --help         display this help text and exit\n"
#~ msgstr " -h, --help         显示此帮助并退出\n"

#~ msgid ""
#~ "\n"
#~ "Available columns (for --show, --raw or --pairs):\n"
#~ msgstr ""
#~ "\n"
#~ "可用的列(针对 --show、--raw 或 --pairs)：\n"

#~ msgid " -v, --version  output version information and exit\n"
#~ msgstr " -v, --version  输出版本信息并退出\n"

#~ msgid " -h, --help     display this help and exit\n"
#~ msgstr " -h, --help     显示此帮助并退出\n"

#~ msgid " -V, --version  output version information and exit\n"
#~ msgstr " -V, --version  输出版本信息并退出\n"

#~ msgid "%s: these options are mutually exclusive:"
#~ msgstr "%s：以下选项相互排斥："

#~ msgid "failed to parse CPU list %s"
#~ msgstr "解析 CPU 列表 %s 失败"

#~ msgid "failed to parse CPU mask %s"
#~ msgstr "解析 CPU 掩码 %s 失败"

#~ msgid " -u, --help     display this help and exit\n"
#~ msgstr " -u, --help     显示此帮助并退出\n"

#~ msgid "No known shells."
#~ msgstr "无已知 shell。"

#~ msgid "incorrect password"
#~ msgstr "密码错误"

#~ msgid "%04d"
#~ msgstr "%04d"

#~ msgid "%s %04d"
#~ msgstr "%s %04d"

#~ msgid " -m, --mtab             search in table of mounted filesystems\n"
#~ msgstr " -m, --mtab             在已挂载文件系统表中搜索\n"

#~ msgid "%s: failed to compose sysfs path"
#~ msgstr "%s：组成 sysfs 路径失败"

#~ msgid "%s: failed to read link"
#~ msgstr "%s：读链接失败"

#~ msgid ""
#~ "\n"
#~ "Available columns (for --output):\n"
#~ msgstr ""
#~ "\n"
#~ "可用列(用于 --output)：\n"

#~ msgid "kind of lock: FL_FLOCK or FL_POSIX."
#~ msgstr "锁类型：FL_FLOCK 或 FL_POSIX。"

#~ msgid "%s - No such file or directory\n"
#~ msgstr "%s - 无此文件或目录\n"

#~ msgid " -v, --verbose    explain what is being done\n"
#~ msgstr " -v, --verbose    解释正在进行的操作\n"

#~ msgid ""
#~ " -r, --random     generate random-based uuid\n"
#~ " -t, --time       generate time-based uuid\n"
#~ " -V, --version    output version information and exit\n"
#~ " -h, --help       display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -r, --random     生成基于随机数的 uuid\n"
#~ " -t, --time       生成基于时间的 uuid\n"
#~ " -V, --version    输出版本信息并退出\n"
#~ " -h, --help       显示此帮助并退出\n"
#~ "\n"

#~ msgid ""
#~ " -a, --all           wipe all magic strings (BE CAREFUL!)\n"
#~ " -b, --backup        create a signature backup in $HOME\n"
#~ " -f, --force         force erasure\n"
#~ " -h, --help          show this help text\n"
#~ " -n, --no-act        do everything except the actual write() call\n"
#~ " -o, --offset <num>  offset to erase, in bytes\n"
#~ " -p, --parsable      print out in parsable instead of printable format\n"
#~ " -q, --quiet         suppress output messages\n"
#~ " -t, --types <list>  limit the set of filesystem, RAIDs or partition tables\n"
#~ " -V, --version       output version information and exit\n"
#~ msgstr ""
#~ " -a, --all           擦除所有魔数字符串(慎重！)\n"
#~ " -b, --backup        在 $HOME 中创建签名备份\n"
#~ " -f, --force         强制擦除\n"
#~ " -h, --help          显示此帮助文字\n"
#~ " -n, --no-act        照常操作但不执行实际的 write() 调用\n"
#~ " -o, --offset <数字> 要擦除的偏移字节数\n"
#~ " -p, --parsable      以可解析的格式打印输出，而非以可打印的格式\n"
#~ " -t, --types <列表>  限制文件系统、RAID 或分区表的集合\n"
#~ " -V, --version       输出版本信息并退出\n"

#~ msgid "unable to exec /bin/umount of `%s'"
#~ msgstr "无法对“%s”执行 /bin/umount"

#~ msgid "Suspend access to a filesystem (ext3/4, ReiserFS, JFS, XFS).\n"
#~ msgstr "暂停对文件系统的访问(ext3/4, ReiserFS, JFS, XFS)。\n"

#~ msgid "Clock not changed - testing only.\n"
#~ msgstr "时钟未更改 - 纯测试。\n"

#~ msgid "sleeping ~%d usec\n"
#~ msgstr "将睡眠 ~%d 微秒\n"

#~ msgid "%ld.%06ld < %ld.%06ld (%.6f)\n"
#~ msgstr "%ld.%06ld < %ld.%06ld (%.6f)\n"

#~ msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095)."
#~ msgstr "硬件时钟寄存器包含的值无效(如一个月的第 50 天)或超出了程序能处理的范围(如2095年)。"

#~ msgid "--date argument too long"
#~ msgstr "--date 的参数过长"

#~ msgid ""
#~ "The value of the --date option is not a valid date.\n"
#~ "In particular, it contains quotation marks."
#~ msgstr ""
#~ "--date 选项的参数不是有效的日期。\n"
#~ "具体说，它包含了引号。"

#~ msgid "Issuing date command: %s\n"
#~ msgstr "正在发出 date 命令：%s\n"

#~ msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
#~ msgstr "无法在 /bin/sh shell 中运行“date”程序。popen() 失败"

#~ msgid "response from date command = %s\n"
#~ msgstr "date 命令的响应为 %s\n"

#~ msgid ""
#~ "The date command issued by %s returned unexpected results.\n"
#~ "The command was:\n"
#~ "  %s\n"
#~ "The response was:\n"
#~ "  %s"
#~ msgstr ""
#~ "%s 发出的 date 命令返回了异常结果。\n"
#~ "命令为：\n"
#~ "  %s\n"
#~ "响应为：\n"
#~ "  %s"

#~ msgid ""
#~ "The date command issued by %s returned something other than an integer where the converted time value was expected.\n"
#~ "The command was:\n"
#~ "  %s\n"
#~ "The response was:\n"
#~ " %s\n"
#~ msgstr ""
#~ "%s 发出的 date 命令返回了意外结果，本应返回包含已转换时间值的一个整数。\n"
#~ "命令为：\n"
#~ "  %s\n"
#~ "响应为：\n"
#~ " %s\n"

#~ msgid "date string %s equates to %ld seconds since 1969.\n"
#~ msgstr "数据字符串 %s 等价于 1969年后 %ld 秒。\n"

#~ msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it."
#~ msgstr "硬件时钟不包含有效时间，因此无法从它来设置系统时间。"

#~ msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
#~ msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"

#~ msgid "\ttz.tz_minuteswest = %d\n"
#~ msgstr "\ttz.tz_minuteswest = %d\n"

#~ msgid "Not setting system clock because running in test mode.\n"
#~ msgstr "将不设置系统时钟，因为正以测试方式运行。\n"

#~ msgid "Must be superuser to set system clock."
#~ msgstr "只能以超级用户身份来设置系统时钟。"

#~ msgid "\tUTC: %s\n"
#~ msgstr "\tUTC：%s\n"

#~ msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n"
#~ msgstr "将不调整漂移系数，因为之前硬件时钟包含垃圾内容。\n"

#~ msgid "Not updating adjtime file because of testing mode.\n"
#~ msgstr "将不更新 adjtime 文件，因为正以测试方式运行。\n"

#~ msgid ""
#~ "Would have written the following to %s:\n"
#~ "%s"
#~ msgstr ""
#~ "若执行，将向 %s 写入以下内容：\n"
#~ "%s"

#~ msgid "Could not open file with the clock adjustment parameters in it (%s) for writing"
#~ msgstr "无法打开包含时钟调整参数(%s)的文件来写入"

#~ msgid "Could not update file with the clock adjustment parameters (%s) in it"
#~ msgstr "无法更新包含时钟调整参数(%s)的文件"

#~ msgid "Drift adjustment parameters not updated."
#~ msgstr "漂移调整参数未更新。"

#~ msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it."
#~ msgstr "硬件时间不包含有效时间，程序无法调整它。"

#~ msgid "At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
#~ msgstr "位于1969(年)后 %ld 秒，RTC 应读取到的是1969(年)后 %ld 秒。\n"

#~ msgid ""
#~ "The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n"
#~ "This copy of hwclock was built for a machine other than Alpha\n"
#~ "(and thus is presumably not running on an Alpha now).  No action taken."
#~ msgstr ""
#~ "只有在 Alpha 计算机上内核才会为硬件时钟保持一个纪元(epoch)值。\n"
#~ "这版 hwclock 程序不是为 Alpha 计算机编译的(因此目前也不打算在 Alpha\n"
#~ " 计算机上运行)。未执行任何操作。"

#~ msgid "Unable to get the epoch value from the kernel."
#~ msgstr "无法从内核获取纪元(epoch)值。"

#~ msgid "Kernel is assuming an epoch value of %lu\n"
#~ msgstr "内核假设纪元(epoch)值为 %lu\n"

#~ msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it."
#~ msgstr "要设置纪元(epoch)值，您必须使用“epoch”选项来指定设置的值。"

#~ msgid "Not setting the epoch to %lu - testing only.\n"
#~ msgstr "不会将纪元(epoch)设置为 %lu - 仅用于测试。\n"

#~ msgid "Unable to set the epoch value in the kernel.\n"
#~ msgstr "无法设置内核中的纪元(epoch)值。\n"

#~ msgid "Query or set the hardware clock.\n"
#~ msgstr "查询或设置硬件锁。\n"

#~ msgid ""
#~ " -h, --help           show this help text and exit\n"
#~ " -r, --show           read hardware clock and print result\n"
#~ "     --get            read hardware clock and print drift corrected result\n"
#~ "     --set            set the RTC to the time given with --date\n"
#~ msgstr ""
#~ " -h, --help           显示此帮助并退出\n"
#~ " -r, --show           读取硬件时钟并打印结果\n"
#~ "     --set            将 RTC 设置为 --date 指定的时间\n"

#~ msgid ""
#~ " -s, --hctosys        set the system time from the hardware clock\n"
#~ " -w, --systohc        set the hardware clock from the current system time\n"
#~ "     --systz          set the system time based on the current timezone\n"
#~ "     --adjust         adjust the RTC to account for systematic drift since\n"
#~ "                        the clock was last set or adjusted\n"
#~ msgstr ""
#~ " -s, --hctosys        从硬件时钟设置系统时间\n"
#~ " -w, --systohc        从当前系统时间设置硬件时钟\n"
#~ "     --systz          基于当前时区设置系统时间\n"
#~ "     --adjust         根据自上次时钟设置或调整后的系统漂移\n"
#~ "                        来调整 RTC\n"

#~ msgid " -c, --compare        periodically compare the system clock with the CMOS clock\n"
#~ msgstr " -c, --compare        定期将系统时钟与 CMOS 时钟相比较\n"

#~ msgid ""
#~ "     --getepoch       print out the kernel's hardware clock epoch value\n"
#~ "     --setepoch       set the kernel's hardware clock epoch value to the \n"
#~ "                        value given with --epoch\n"
#~ msgstr ""
#~ "     --getepoch       打印内核的硬件时钟纪元(epoch)值\n"
#~ "     --setepoch       将内核的硬件时钟纪元(epoch)值设置为\n"
#~ "                        --epoch 选项指定的值\n"

#~ msgid ""
#~ "     --predict        predict RTC reading at time given with --date\n"
#~ " -V, --version        display version information and exit\n"
#~ msgstr ""
#~ "     --predict        预测 --date 选项所指定时刻读取到的 RTC 值\n"
#~ " -V, --version        显示版本信息并退出\n"

#~ msgid ""
#~ " -u, --utc            the hardware clock is kept in UTC\n"
#~ "     --localtime      the hardware clock is kept in local time\n"
#~ msgstr ""
#~ " -u, --utc            硬件时钟保持为 UTC 时间\n"
#~ "     --localtime      硬件时钟保持为本地时间\n"

#~ msgid " -f, --rtc <file>     special /dev/... file to use instead of default\n"
#~ msgstr " -f, --rtc <文件>     代替默认文件的特殊 /dev/... 文件\n"

#~ msgid ""
#~ "     --directisa      access the ISA bus directly instead of %s\n"
#~ "     --badyear        ignore RTC's year because the BIOS is broken\n"
#~ "     --date <time>    specifies the time to which to set the hardware clock\n"
#~ "     --epoch <year>   specifies the year which is the beginning of the\n"
#~ "                        hardware clock's epoch value\n"
#~ msgstr ""
#~ "     --directisa      直接访问 ISA 总线，而非 %s\n"
#~ "     --badyear        忽略  RTC 年份(由于 BIOS 损坏)\n"
#~ "     --date <时间>    指定要设置的硬件时钟时间\n"
#~ "     --epoch <年>     指定作为硬件纪元(epoch)值起始的年份\n"

#, fuzzy
#~| msgid ""
#~| "     --update-drift   update drift factor in %1$s (requires\n"
#~| "                        --set or --systohc)\n"
#~| "     --noadjfile      do not access %1$s; this requires the use of\n"
#~| "                        either --utc or --localtime\n"
#~| "     --adjfile <file> specifies the path to the adjust file;\n"
#~| "                        the default is %1$s\n"
#~ msgid ""
#~ "     --update-drift   update drift factor in %1$s (requires\n"
#~ "                        --set or --systohc)\n"
#~ "     --noadjfile      do not access %1$s; this requires the use of\n"
#~ "                        either --utc or --localtime\n"
#~ "     --adjfile <file> specifies the path to the adjust file;\n"
#~ "                        the default is %1$s\n"
#~ msgstr ""
#~ "     --noadjfile      不访问 %s；需要使用 --utc 或 --localtime 选项\n"
#~ "     --adjfile <文件> 指定调整文件的路径；\n"
#~ "                        默认为 %s\n"

#~ msgid ""
#~ "     --test           do not update anything, just show what would happen\n"
#~ " -D, --debug          debugging mode\n"
#~ "\n"
#~ msgstr ""
#~ "     --test           不更新，只显示将进行什么操作\n"
#~ " -D, --debug          调试模式\n"
#~ "\n"

#~ msgid ""
#~ " -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
#~ "      tell hwclock the type of Alpha you have (see hwclock(8))\n"
#~ "\n"
#~ msgstr ""
#~ " -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
#~ "      告知 hwclock 您使用的 Alpha 类型(参阅 hwclock(8))\n"
#~ "\n"

#~ msgid "Sorry, only the superuser can use the Hardware Clock."
#~ msgstr "对不起，只有超级用户可以使用硬件时钟。"

#~ msgid "%s takes no non-option arguments.  You supplied %d.\n"
#~ msgstr "%s 不接受无选项的参数。您提供了 %d。\n"

#~ msgid "No usable set-to time.  Cannot set clock."
#~ msgstr "无可用的待设置时间。无法设置时钟。"

#~ msgid "booted from MILO\n"
#~ msgstr "从 MILO 启动\n"

#~ msgid "Ruffian BCD clock\n"
#~ msgstr "Ruffian BCD 时钟\n"

#~ msgid "clockport adjusted to 0x%x\n"
#~ msgstr "时钟端口已调整为 0x%x\n"

#~ msgid "funky TOY!\n"
#~ msgstr "烦人的 TOY！\n"

#~ msgid "atomic %s failed for 1000 iterations!"
#~ msgstr "原子操作 %s 1000 次迭代都失败了！"

#~ msgid "cmos_read(): write to control address %X failed"
#~ msgstr "cmos_read()：写控制地址 %X 失败"

#~ msgid "cmos_read(): read from data address %X failed"
#~ msgstr "cmos_read()：从数据地址 %X 读取失败"

#~ msgid "cmos_write(): write to control address %X failed"
#~ msgstr "cmos_write()：写控制地址 %X 失败"

#~ msgid "cmos_write(): write to data address %X failed"
#~ msgstr "cmos_write(): 读数据地址 %X 失败"

#~ msgid "I failed to get permission because I didn't try."
#~ msgstr "程序未获得权限，因为未尝试获取。"

#~ msgid "unable to get I/O port access:  the iopl(3) call failed."
#~ msgstr "无法访问 I/O 端口：iopl(3) 调用失败。"

#~ msgid "Probably you need root privileges.\n"
#~ msgstr "您可能需要 root 用户权限。\n"

#~ msgid "%s does not have interrupt functions. "
#~ msgstr "%s 没有中断函数。"

#~ msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
#~ msgstr "对 %s ioctl() 以打开更新中断意外失败"

#~ msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file %s.  This file does not exist on this system."
#~ msgstr "要操作内核中的纪元(epoch)值，必须通过设备特殊文件 %s 访问 Linux “rtc”设备驱动。此系统上不存在该文件。"

#~ msgid "we have read epoch %lu from %s with RTC_EPOCH_READ ioctl.\n"
#~ msgstr "我们使用RTC_EPOCH_READ ioctl 从 %2$s 读取了纪元(epoch) %1$lu。\n"

#~ msgid "The epoch value may not be less than 1900.  You requested %ld"
#~ msgstr "纪元(epoch)值不能小于 1900。您要求了 %ld"

#~ msgid "setting epoch to %lu with RTC_EPOCH_SET ioctl to %s.\n"
#~ msgstr "正通过 RTC_EPOCH_SET ioctl 向 %2$s 设置纪元(epoch) %1$lu。\n"

#~ msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
#~ msgstr "%s 的内核设备驱动没有 RTC_EPOCH_SET ioctl (方法)。"

#~ msgid "failed to initialize output line"
#~ msgstr "初始化输出行失败"

#~ msgid ""
#~ "\n"
#~ "Available --list columns:\n"
#~ msgstr ""
#~ "\n"
#~ "可用的 --list 列：\n"

#~ msgid "error: can not set signal handler"
#~ msgstr "错误：无法设置信号处理函数"

#~ msgid "error: can not restore signal handler"
#~ msgstr "错误：无法恢复信号处理函数"

#~ msgid "only root can mount %s on %s"
#~ msgstr "只有 root 能将 %s 挂载到 %s"

#~ msgid "%s is used as read only loop, mounting read-only"
#~ msgstr "%s 正用于只读回环，将以只读方式挂载"

#~ msgid ""
#~ "%s: more filesystems detected. This should not happen,\n"
#~ "       use -t <type> to explicitly specify the filesystem type or\n"
#~ "       use wipefs(8) to clean up the device."
#~ msgstr ""
#~ "%s：检测到更多文件系统。这不应该出现，\n"
#~ "       请使用 -t <类型> 指明文件系统类型或\n"
#~ "       使用 wipefs(8) 清理该设备。"

#~ msgid "I could not determine the filesystem type, and none was specified"
#~ msgstr "程序无法检测文件系统类型，并且您未指定类型"

#~ msgid "you must specify the filesystem type"
#~ msgstr "您必须指明文件系统类型"

#~ msgid "mount source not defined"
#~ msgstr "未定义挂臷源"

#~ msgid "%s: mount failed"
#~ msgstr "%s：挂载失败"

#~ msgid "%s: filesystem mounted, but mount(8) failed"
#~ msgstr "%s：文件系统已挂载，但 mount(8) 失败"

#~ msgid "%s is busy"
#~ msgstr "%s 忙"

#~ msgid "       %s is already mounted on %s\n"
#~ msgstr "       %s 已经挂载到 %s 上\n"

#~ msgid "%s not mounted or bad option"
#~ msgstr "%s 未挂载或选项有误"

#~ msgid ""
#~ "       (for several filesystems (e.g. nfs, cifs) you might\n"
#~ "       need a /sbin/mount.<type> helper program)\n"
#~ msgstr ""
#~ "       (对某些文件系统(如 nfs、cifs) 您可能需要\n"
#~ "       一款 /sbin/mount.<类型> 助手程序)\n"

#~ msgid ""
#~ "\n"
#~ "       In some cases useful info is found in syslog - try\n"
#~ "       dmesg | tail or so.\n"
#~ msgstr ""
#~ "\n"
#~ "       有些情况下在 syslog 中可以找到一些有用信息- 请尝试\n"
#~ "       dmesg | tail  这样的命令看看。\n"

#~ msgid ""
#~ "%s\n"
#~ "Try `%s --help' for more information."
#~ msgstr ""
#~ "%s\n"
#~ "请使用“%s --help”了解更多信息。"

#~ msgid "Try `%s --help' for more information."
#~ msgstr "请使用“%s --help”了解更多信息。"

#~ msgid "unrecognized option '%c'"
#~ msgstr "不识别的选项“%c”"

#~ msgid "cannot execute: %s"
#~ msgstr "无法执行：%s"

#~ msgid " -T, --trust-irq <on|off>     make driver to trust irq\n"
#~ msgstr " -T, --trust-irq <on|off>     将驱动设置为信任的中断\n"

#~ msgid "%s: umount failed"
#~ msgstr "%s：umount 失败"

#~ msgid ""
#~ "%s: target is busy\n"
#~ "        (In some cases useful info about processes that\n"
#~ "         use the device is found by lsof(8) or fuser(1).)"
#~ msgstr ""
#~ "%s：目标忙。\n"
#~ "        (有些情况下通过 lsof(8) 或 fuser(1) 可以\n"
#~ "         找到有关使用该设备的进程的有用信息。)"

#~ msgid "%s: mountpoint not found"
#~ msgstr "%s：找不到挂臷点"

#~ msgid "unsupported algorithm: %s"
#~ msgstr "不支持的算法︰%s"

#~ msgid "     --version              output version information and exit\n"
#~ msgstr "     --version              输出版本信息并退出\n"

#~ msgid "ttyname failed"
#~ msgstr "ttyname 失败"

#~ msgid " --version                         show version information and exit\n"
#~ msgstr " --version                         输出版本信息并退出\n"

#~ msgid "cannot get tty name"
#~ msgstr "无法获得 tty 名称"

#~ msgid "line %d is too long, output will be truncated"
#~ msgstr "第 %d 行过长，输出将截短"

#~ msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
#~ msgstr "不完整写入“%s”(写入 %zd，应为 %zd)\n"

#~ msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
#~ msgstr "%s：无法添加 inotify 观察(达到了 inotify 观察数限制)。"

#~ msgid " %s [option] <file>\n"
#~ msgstr " %s [选项] <文件>\n"

#~ msgid "Follow the growth of a log file.\n"
#~ msgstr "追踪日志文件增长。\n"

#~ msgid " -n, --lines <number>   output the last <number> lines\n"
#~ msgstr " -n, --lines <数字>     输出最后若干行\n"

#~ msgid "Warning: use of 'tailf' is deprecated, use 'tail -f' instead.\n"
#~ msgstr "警告：“tailf”已废弃，请转用“tail -f”。\n"

#, fuzzy
#~| msgid "filesystem label"
#~ msgid "Filesystem label:"
#~ msgstr "文件系统标签"

#~ msgid "%s is not a block special device"
#~ msgstr "%s 不是一个块特殊设备"

#~ msgid "%s: device is misaligned"
#~ msgstr "%s：设备未正确对齐"

#~ msgid "OS/2 hidden C: drive"
#~ msgstr "OS/2 隐藏的 C: 盘"

#~ msgid "failed to set PATH"
#~ msgstr "设置 PATH 失败"

#~ msgid "%d"
#~ msgstr "%d"

#~ msgid "use of 'kill --pid' option as command name is deprecated"
#~ msgstr "将“kill --pid”选项当作命令的做法已经废弃"

#~ msgid "%s: failed to get device path"
#~ msgstr "%s：获取设备路径失败"

#~ msgid "%s: unknown device name"
#~ msgstr "%s：未知设备名称"

#~ msgid "%s: failed to get dm name"
#~ msgstr "%s：获取 dm 名称失败"

#~ msgid "the sort column has to be among the output columns"
#~ msgstr "排序列必须是输出的列"

#~ msgid ""
#~ " -p, --pid <path>        path to pid file\n"
#~ " -s, --socket <path>     path to socket\n"
#~ " -T, --timeout <sec>     specify inactivity timeout\n"
#~ " -k, --kill              kill running daemon\n"
#~ " -r, --random            test random-based generation\n"
#~ " -t, --time              test time-based generation\n"
#~ " -n, --uuids <num>       request number of uuids\n"
#~ " -P, --no-pid            do not create pid file\n"
#~ " -F, --no-fork           do not daemonize using double-fork\n"
#~ " -S, --socket-activation do not create listening socket\n"
#~ " -d, --debug             run in debugging mode\n"
#~ " -q, --quiet             turn on quiet mode\n"
#~ " -V, --version           output version information and exit\n"
#~ " -h, --help              display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -p, --pid <路径>        pid 文件路径\n"
#~ " -s, --socket <路径>     套接字路径\n"
#~ " -T, --timeout <秒数>    指定不活动超时\n"
#~ " -k, --kill              杀死运行进程\n"
#~ " -r, --random            测试基于随机数的生成方法\n"
#~ " -t, --time              测试基于时间的生成方法\n"
#~ " -n, --uuids <数字>      指定 uuid 号\n"
#~ " -P, --no-pid            不创建 pid 文件\n"
#~ " -F, --no-fork           不使用双 fork 变成守护进程\n"
#~ " -S, --socket-activation 不创建侦听套接字\n"
#~ " -d, --debug             以调试模式运行\n"
#~ " -q, --quiet             打开安静模式\n"
#~ " -V, --version           输出版本信息并退出\n"
#~ " -h, --help              显示此帮助并退出\n"
#~ "\n"

#~ msgid "unknown scheduling policy"
#~ msgstr "未知的调度策略"

#, fuzzy
#~| msgid ""
#~| " -o, --offset <num>  offset in bytes to discard from\n"
#~| " -l, --length <num>  length of bytes to discard from the offset\n"
#~| " -s, --secure        perform secure discard\n"
#~| " -v, --verbose       print aligned length and offset\n"
#~ msgid ""
#~ " -o, --offset <num>  offset in bytes to discard from\n"
#~ " -l, --length <num>  length of bytes to discard from the offset\n"
#~ " -p, --step <num>    size of the discard iterations within the offset\n"
#~ " -s, --secure        perform secure discard\n"
#~ " -v, --verbose       print aligned length and offset\n"
#~ msgstr ""
#~ " -o, --offset <数字> 要忽略部分的字节偏移量\n"
#~ " -l, --length <数字> 从偏移位置开始要忽略的字节长度\n"
#~ " -s, --secure        执行安全忽略\n"
#~ " -v, --verbose       打印对齐的长度和偏移\n"

#~ msgid "%s: parse error: ignore entry at line %d."
#~ msgstr "%s：解析出错：忽略第 %d 行的记录。"

#~ msgid "pages"
#~ msgstr "页数"

#~ msgid "different"
#~ msgstr "不同"

#~ msgid "same"
#~ msgstr "相同"

#~ msgid "bad timeout value: %s"
#~ msgstr "超时值有误：%s"

#~ msgid "expected a number, but got '%s'"
#~ msgstr "应为数字，但收到了“%s”"

#~ msgid "divisor '%s'"
#~ msgstr "除数“%s”"

#~ msgid "argument error: %s"
#~ msgstr "参数出错：%s"

#~ msgid "tty path %s too long"
#~ msgstr "tty 路径 %s 过长"

#~ msgid "Minimal size is %ju"
#~ msgstr "最小为 %ju"

#~ msgid "Please, select a type to create a new disk label."
#~ msgstr "请选择创建新磁盘标签的类型。"

#~ msgid "Help Screen for cfdisk"
#~ msgstr "cfdisk 帮助页面"

#~ msgid "disk drive."
#~ msgstr "分区。"

#~ msgid "Copyright (C) 2014 Karel Zak <kzak@redhat.com> "
#~ msgstr "Copyright (C) 2014 Karel Zak <kzak@redhat.com> "

#~ msgid "Based on the original cfdisk from Kevin E. Martin & aeb."
#~ msgstr "基于由 Kevin E. Martin & aeb 编写的原 cfdisk。"

#~ msgid "             `no'"
#~ msgstr "             写入"

#~ msgid "Device open in read-only mode"
#~ msgstr "设备以只读方式打开"

#~ msgid "Usage: %s [options] device\n"
#~ msgstr "用法：%s [选项] 设备\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -n, --no-verify  disable the verification after the format\n"
#~ " -V, --version    output version information and exit\n"
#~ " -h, --help       display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ " -n, --no-verify  禁止格式化后的校验\n"
#~ " -V, --version    输出版本信息并退出\n"
#~ " -h, --help       显示此帮助并退出\n"
#~ "\n"

#~ msgid "stat failed %s"
#~ msgstr "stat 失败：%s"

#~ msgid " -v  be verbose\n"
#~ msgstr " -v  详尽输出\n"

#~ msgid "Usage:\n"
#~ msgstr "用法：\n"

#~ msgid ""
#~ "\n"
#~ "For more information see mkfs(8).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息请参阅 mkfs(8)。\n"

#~ msgid ""
#~ "Very long (%zu bytes) filename `%s' found.\n"
#~ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile.  Exiting."
#~ msgstr ""
#~ "发现超长的(%zu 字节)文件名“%s”。\n"
#~ " 请增加 mkcramfs.c 中 MAX_INPUT_NAMELEN 的值并重新编译。将退出。"

#~ msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#~ msgstr "用法：%s [-c | -l 文件名] [-nXX] [-iXX] /dev/name [块数]"

#~ msgid "%s: unable to allocate buffer for superblock"
#~ msgstr "%s：不能为超级块分配缓冲区"

#~ msgid "%s: unable to allocate buffers for maps"
#~ msgstr "%s：不能为 maps 分配缓冲区"

#~ msgid "%s: unable to allocate buffer for inodes"
#~ msgstr "%s：不能为 inodes 分配缓冲区"

#~ msgid "%s (%s)\n"
#~ msgstr "%s (%s)\n"

#~ msgid "%s: bad inode size"
#~ msgstr "%s：不正确的 inode 大小"

#~ msgid "Bad swap header size, no label written."
#~ msgstr "交换头(header)大小有误，未写入标签。"

#~ msgid "seek error on %s - cannot seek to %lu"
#~ msgstr "在 %s 上定位出错 - 无法定位到 %lu"

#~ msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x"
#~ msgstr "定位出错：想要 0x%08x%08x，得到了 0x%08x%08x"

#~ msgid "read error on %s - cannot read sector %llu"
#~ msgstr "在 %s 上定位出错 - 无法定位到 %llu"

#~ msgid "write error on %s - cannot write sector %llu"
#~ msgstr "在 %s 上定位出错 - 无法定位到 %llu"

#~ msgid "cannot open partition sector save file (%s)"
#~ msgstr "打不开分区扇区保存文件(%s)"

#~ msgid "write error on %s"
#~ msgstr "%s 写出错"

#~ msgid "cannot stat partition restore file (%s)"
#~ msgstr "无法 stat 分区恢复文件(%s)"

#~ msgid "partition restore file has wrong size - not restoring"
#~ msgstr "分区恢复文件大小有误 - 将不恢复"

#~ msgid "cannot open partition restore file (%s)"
#~ msgstr "无法打开分区恢复文件(%s)"

#~ msgid "cannot open device %s for writing"
#~ msgstr "不能打开 %s 以写入"

#~ msgid "Disk %s: cannot get geometry"
#~ msgstr "磁盘 %s：无法获取几何属性"

#~ msgid "Disk %s: cannot get size"
#~ msgstr "磁盘 %s：无法获取尺寸"

#~ msgid ""
#~ "Warning: start=%lu - this looks like a partition rather than\n"
#~ "the entire disk. Using fdisk on it is probably meaningless.\n"
#~ "[Use the --force option if you really want this]"
#~ msgstr ""
#~ "警告：起点为%lu - 这似乎是一个分区，而不是整个盘。对它执行\n"
#~ "fdisk 可能没有意义。[如果您真想这么做，请使用 --force 选项]"

#~ msgid "Warning: HDIO_GETGEO says that there are %lu heads"
#~ msgstr "警告：HDIO_GETGEO 表明有 %lu 个磁头"

#~ msgid "Warning: HDIO_GETGEO says that there are %lu sectors"
#~ msgstr "警告：HDIO_GETGEO 表明有 %lu 个扇区"

#~ msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders"
#~ msgstr "警告：BLKGETSIZE/HDIO_GETGEO 表明有 %lu 个柱面"

#~ msgid ""
#~ "Warning: unlikely number of sectors (%lu) - usually at most 63\n"
#~ "This will give problems with all software that uses C/H/S addressing."
#~ msgstr ""
#~ "警告：扇区数异常(%lu) - 通常最多是 63\n"
#~ "这会给所有使用 C/H/S 地址的软件带来问题。"

#~ msgid ""
#~ "\n"
#~ "Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
#~ msgstr ""
#~ "\n"
#~ "磁盘 %s：%lu 个柱面，%lu 个磁头，%lu 个扇区/磁道\n"

#~ msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)"
#~ msgstr "分区 %2$s 的 %1$s 的磁头数有误：%3$lu (应在 0-%4$lu 范围)"

#~ msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)"
#~ msgstr "分区 %2$s 的 %1$s 的扇区数有误：%3$lu (应在 1-%4$lu 范围)"

#~ msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)"
#~ msgstr "分区 %2$s 的 %1$s 的柱面数有误：%3$lu (应在 0-%4$lu 范围)"

#~ msgid "Re-reading the partition table ...\n"
#~ msgstr "正在重新读取分区表...;\n"

#~ msgid ""
#~ "The command to re-read the partition table failed.\n"
#~ "Run partprobe(8), kpartx(8) or reboot your system now,\n"
#~ "before using mkfs"
#~ msgstr ""
#~ "重新读取分区表的命令失败。\n"
#~ "在使用 mkfs 前，请先运行 partprobe(8)、kpartx(8) 或\n"
#~ "重启系统。"

#~ msgid "Error closing %s"
#~ msgstr "关闭 %s 出错"

#~ msgid "%s: no such partition\n"
#~ msgstr "%s：没有此分区\n"

#~ msgid "unrecognized format - using sectors"
#~ msgstr "无法识别的格式 - 将使用扇区"

#~ msgid "unimplemented format - using %s"
#~ msgstr "未实现的格式 - 将使用 %s"

#~ msgid "sectors"
#~ msgstr "扇区"

#~ msgid ""
#~ "Units: cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "单位：%lu 的柱面，1024字节的块，从 %d 开始计算\n"
#~ "\n"

#~ msgid "   Device Boot Start     End   #cyls    #blocks   Id  System\n"
#~ msgstr "   设备   启动 开头      结束  #柱面    #块       Id  系统\n"

#~ msgid ""
#~ "Units: sectors of 512 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "单位：512字节的扇区，从 %d 开始计算\n"
#~ "\n"

#~ msgid "   Device Boot    Start       End   #sectors  Id  System\n"
#~ msgstr "   设备   启动    开头        结束  #扇区     Id  系统\n"

#~ msgid ""
#~ "Units: blocks of 1024 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "单位：1024字节的块，从 %d 开始计算\n"
#~ "\n"

#~ msgid "   Device Boot   Start       End    #blocks   Id  System\n"
#~ msgstr "   设备   启动   开头        结束   #块       Id  系统\n"

#~ msgid ""
#~ "Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from %d\n"
#~ "\n"
#~ msgstr ""
#~ "单位：1MiB = 1024*1024 字节，1024字节的块，从 %d 开始计算\n"
#~ "\n"

#~ msgid "   Device Boot Start   End    MiB    #blocks   Id  System\n"
#~ msgstr "   设备   启动 开头    结束   MiB    #块       Id  系统\n"

#~ msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
#~ msgstr "\t\t开头：(c,h,s) 应为 (%ld,%ld,%ld) 找到的为 (%ld,%ld,%ld)\n"

#~ msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
#~ msgstr "\t\t结束：(c,h,s) 应为 (%ld,%ld,%ld) 找到的为 (%ld,%ld,%ld)\n"

#~ msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
#~ msgstr "分区结束在柱面 %ld，超过了磁盘的末尾\n"

#~ msgid ""
#~ "Warning: The partition table looks like it was made\n"
#~ "  for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
#~ "For this listing I'll assume that geometry."
#~ msgstr ""
#~ "警告：分区表似乎是为 C/H/S=*/%ld/%ld 制作的\n"
#~ "(而非 %ld/%ld/%ld)。\n"
#~ "对这次列表程序将使用该几何属性。"

#~ msgid "no partition table present"
#~ msgstr "不存在分区表"

#~ msgid "strange, only %d partition defined"
#~ msgid_plural "strange, only %d partitions defined"
#~ msgstr[0] "异常，只定义了 %d 个分区"

#~ msgid "Warning: partition %s has size 0 but is not marked Empty"
#~ msgstr "警告：分区 %s 大小为 0 但未标记为 空"

#~ msgid "Warning: partition %s has size 0 and is bootable"
#~ msgstr "警告：分区 %s 大小为 0 并且标记了 可启动"

#~ msgid "Warning: partition %s has size 0 and nonzero start"
#~ msgstr "警告：分区 %s 大小为 0 且起始位置不为 0"

#~ msgid "Warning: partitions %s and %s overlap"
#~ msgstr "警告：分区 %s 和 %s 有重叠"

#~ msgid ""
#~ "Warning: partition %s contains part of the partition table (sector %llu),\n"
#~ "and will destroy it when filled"
#~ msgstr "警告：分区 %s 包含部分分区表(%llu)，填充会破坏它。"

#~ msgid "Warning: partition %s starts at sector 0"
#~ msgstr "警告：分区 %s 起始于扇区 0"

#~ msgid "Warning: partition %s extends past end of disk"
#~ msgstr "警告：分区 %s 超出了磁盘终点"

#~ msgid ""
#~ "Warning: partition %s has size %d.%d TB (%llu bytes),\n"
#~ "which is larger than the %llu bytes limit imposed\n"
#~ "by the DOS partition table for %d-byte sectors"
#~ msgstr ""
#~ "警告：分区 %s 大小为 %d.%d TB (%llu 字节)，大于\n"
#~ "%llu 字节(DOS 分区表对 %d-字节扇区的强制限定值)"

#~ msgid ""
#~ "Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
#~ "which exceeds the DOS partition table limit of %llu sectors"
#~ msgstr ""
#~ "警告：分区 %s 起点为第 %llu 扇区 (%d.%d TB，对于 %d-字节扇区)，\n"
#~ "这超过了 DOS 分区表 %llu 个扇区的限制"

#~ msgid ""
#~ "Among the primary partitions, at most one can be extended\n"
#~ " (although this is not a problem under Linux)"
#~ msgstr ""
#~ "主分区中只有一个可设为扩展分区\n"
#~ "(尽管 Linux 下不存在这个问题)"

#~ msgid "Warning: partition %s does not start at a cylinder boundary"
#~ msgstr "警告：分区 %s 未起始于柱面边界。"

#~ msgid "Warning: partition %s does not end at a cylinder boundary"
#~ msgstr "警告：分区 %s 未结束于柱面边界。"

#~ msgid ""
#~ "Warning: more than one primary partition is marked bootable (active)\n"
#~ "This does not matter for LILO, but the DOS MBR will not boot this disk."
#~ msgstr ""
#~ "超过一个主分区被标记为 可启动(活动)。这对 LILO 没有影响，但 \n"
#~ "DOS MBR 将无法启动该磁盘。"

#~ msgid ""
#~ "Warning: usually one can boot from primary partitions only\n"
#~ "LILO disregards the `bootable' flag."
#~ msgstr ""
#~ "警告：通常只能从主分区启动\n"
#~ "LILO 会忽略“可启动”标志。"

#~ msgid ""
#~ "Warning: no primary partition is marked bootable (active)\n"
#~ "This does not matter for LILO, but the DOS MBR will not boot this disk."
#~ msgstr ""
#~ "警告：没有一个主分区被标记为 可启动(活动)。这对 LILO 没有影响，但 \n"
#~ "DOS MBR 将无法启动该磁盘。"

#~ msgid "start"
#~ msgstr "起点"

#~ msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)"
#~ msgstr "分区 %s：起点：(c,h,s) 应为 (%ld,%ld,%ld) 找到的为 (%ld,%ld,%ld)"

#~ msgid "end"
#~ msgstr "末尾"

#~ msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)"
#~ msgstr "分区 %s：终点：(c,h,s) 应为 (%ld,%ld,%ld) 找到的为 (%ld,%ld,%ld)"

#~ msgid "partition %s ends on cylinder %ld, beyond the end of the disk"
#~ msgstr "分区 %s 结束于 %ld，超出了磁盘的末尾"

#~ msgid ""
#~ "Warning: shifted start of the extd partition from %lld to %lld\n"
#~ "(For listing purposes only. Do not change its contents.)"
#~ msgstr ""
#~ "警告：扩展分区的起点从 %lld 移到了 %lld\n"
#~ "(仅用于列表。不改变其内容。)"

#~ msgid ""
#~ "Warning: extended partition does not start at a cylinder boundary.\n"
#~ "DOS and Linux will interpret the contents differently."
#~ msgstr ""
#~ "警告：扩展分区未开始于柱面边界处。\n"
#~ "DOS 和 Linux 对其内容的解释会有分歧。"

#~ msgid "ERROR: sector %llu does not have an msdos signature"
#~ msgstr "错误：扇区 %llu 没有 msdos 签名"

#~ msgid "too many partitions - ignoring those past nr (%zu)"
#~ msgstr "分区过多 - 将忽略超过 nr (%zu) 的那些分区"

#~ msgid "tree of partitions?"
#~ msgstr "分区树？"

#~ msgid "detected Disk Manager - unable to handle that"
#~ msgstr "检测到磁盘管理器 - 无法处理它"

#~ msgid "DM6 signature found - giving up"
#~ msgstr "找到 DM6 签名 - 将放弃"

#~ msgid "strange..., an extended partition of size 0?"
#~ msgstr "不对呀...，一个大小为 0 的扩展分区?"

#~ msgid "strange..., a BSD partition of size 0?"
#~ msgstr "不对呀...，一个大小为 0 的 BSD 分区?"

#~ msgid "-n flag was given: Nothing changed"
#~ msgstr "指定了 -n 标志：未做更改"

#~ msgid "Failed saving the old sectors - aborting\n"
#~ msgstr "保存旧扇区失败 - 将中止\n"

#~ msgid "Failed writing the partition on %s"
#~ msgstr "写 %s 上的分区失败"

#~ msgid "long or incomplete input line - quitting"
#~ msgstr "输入行太长或不完整 - 将退出"

#~ msgid "input error: `=' expected after %s field"
#~ msgstr "输入错误：%s 字段后应为“=”"

#~ msgid "unrecognized input: %s"
#~ msgstr "无法识别的输入：%s"

#~ msgid "number too big"
#~ msgstr "数字过大"

#~ msgid "trailing junk after number"
#~ msgstr "数字后有垃圾内容"

#~ msgid "no room for partition descriptor"
#~ msgstr "没有空间放置分区描述符"

#~ msgid "cannot build surrounding extended partition"
#~ msgstr "无法创建环绕扩展分区"

#~ msgid "too many input fields"
#~ msgstr "输入字段过多"

#~ msgid "No room for more"
#~ msgstr "空间不足"

#~ msgid "Illegal type"
#~ msgstr "非法类型"

#~ msgid "Warning: given size (%llu) exceeds max allowable size (%llu)"
#~ msgstr "警告：指定大小(%llu)超过了最大允许大小(%llu)"

#~ msgid "Warning: bad partition start (earliest %llu)"
#~ msgstr "警告：分区起点有误(最早 %llu)"

#~ msgid "unrecognized bootable flag - choose - or *"
#~ msgstr "无法识别的可启动标志 - 选择 - 或 *"

#~ msgid "partial c,h,s specification?"
#~ msgstr "不完整的 c,h,s 说明？"

#~ msgid "bad input"
#~ msgstr "输入错误"

#~ msgid "too many partitions"
#~ msgstr "分区过多"

#~ msgid ""
#~ "Input in the following format; absent fields get a default value.\n"
#~ "<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
#~ "Usually you only need to specify <start> and <size> (and perhaps <type>)."
#~ msgstr ""
#~ "按以下格式输入，未指定的字段将以默认值填充。\n"
#~ "<起始> <大小> <类型 [E,S,L,X,hex]> <可启动 [-,*]> <c,h,s> <c,h,s>\n"
#~ "通常您只须指定 <起始> 和 <大小> (可能还要指定 <类型>)。"

#~ msgid " %s [options] <device>...\n"
#~ msgstr " %s [选项] <设备>...\n"

#~ msgid ""
#~ " -s, --show-size           list size of a partition\n"
#~ " -c, --id                  change or print partition Id\n"
#~ "     --change-id           change Id\n"
#~ "     --print-id            print Id\n"
#~ msgstr ""
#~ " -s, --show-size           列出每个分区的大小\n"
#~ " -c, --id                  更改或打印分区 Id\n"
#~ "     --change-id           更改 Id\n"
#~ "     --print-id            打印 Id\n"

#~ msgid ""
#~ " -l, --list                list partitions of each device\n"
#~ " -d, --dump                idem, but in a format suitable for later input\n"
#~ " -i, --increment           number cylinders etc. from 1 instead of from 0\n"
#~ " -u, --unit <letter>       units to be used; <letter> can be one of\n"
#~ "                             S (sectors), C (cylinders), B (blocks), or M (MB)\n"
#~ msgstr ""
#~ " -l, --list                列出每个设备的分区\n"
#~ " -d, --dump                同上，但以适合稍后输入的格式列出\n"
#~ " -i, --increment           给柱面等计数时从 1 而非从 0 开始\n"
#~ " -u, --unit <字母>         要使用的单位；<字母> 可以是以下之一\n"
#~ "                             S(扇区)，C(柱面)，B(块)或 M(MB)\n"

#~ msgid ""
#~ " -1, --one-only            reserved option that does nothing currently\n"
#~ " -T, --list-types          list the known partition types\n"
#~ " -D, --DOS                 for DOS-compatibility: waste a little space\n"
#~ " -E, --DOS-extended        DOS extended partition compatibility\n"
#~ " -R, --re-read             make the kernel reread the partition table\n"
#~ msgstr ""
#~ " -1, --one-only            预留选项，目前没有作用\n"
#~ " -T, --list-types          列出已知的分区类型\n"
#~ " -D, --DOS                 与 DOS 兼容；会浪费一点空间\n"
#~ " -E, --DOS-extended        与 DOS 扩展分区兼容\n"
#~ " -R, --re-read             让内核重新读取分区表\n"

#~ msgid ""
#~ " -N <number>               change only the partition with this <number>\n"
#~ " -n                        do not actually write to disk\n"
#~ " -O <file>                 save the sectors that will be overwritten to <file>\n"
#~ " -I <file>                 restore sectors from <file>\n"
#~ msgstr ""
#~ " -N <数字>                 只更改分区号为 <数字> 的分区\n"
#~ " -n                        并不真的写入磁盘\n"
#~ " -O <文件>                 将要覆盖的分区保存到 <文件> 中\n"
#~ " -I <文件>                 从 <文件> 恢复扇区\n"

#~ msgid ""
#~ " -V, --verify              check that the listed partitions are reasonable\n"
#~ " -v, --version             display version information and exit\n"
#~ " -h, --help                display this help text and exit\n"
#~ msgstr ""
#~ " -V, --verify              检查列出扇区的有效性\n"
#~ " -v, --version             显示版本信息并退出\n"
#~ " -h, --help                显示此帮助并退出\n"

#~ msgid ""
#~ "\n"
#~ "Dangerous options:\n"
#~ msgstr ""
#~ "\n"
#~ "危险选项：\n"

#~ msgid ""
#~ " -f, --force               disable all consistency checking\n"
#~ "     --no-reread           do not check whether the partition is in use\n"
#~ " -q, --quiet               suppress warning messages\n"
#~ " -L, --Linux               do not complain about things irrelevant for Linux\n"
#~ msgstr ""
#~ " -f, --force               禁止所有一致性检查\n"
#~ "     --no-reread           不检查分区是否正在使用\n"
#~ " -q, --quiet               抑制警告消息输出\n"
#~ " -L, --Linux               不报告与 Linux 无关的事情\n"

#~ msgid ""
#~ " -g, --show-geometry       print the kernel's idea of the geometry\n"
#~ " -G, --show-pt-geometry    print geometry guessed from the partition table\n"
#~ msgstr ""
#~ " -g, --show-geometry       打印内核检测到的几何属性\n"
#~ " -G, --show-pt-geometry    打印从分区表推测出的几何属性\n"

#~ msgid ""
#~ " -A, --activate[=<device>] activate the bootable flag\n"
#~ " -U, --unhide[=<device>]   set partition as unhidden\n"
#~ " -x, --show-extended       also list extended partitions in the output,\n"
#~ "                             or expect descriptors for them in the input\n"
#~ msgstr ""
#~ " -A, --activate[=<设备>]   激活 可启动 标志\n"
#~ " -U, --unhide[=<设备>]     取消分区隐藏\n"
#~ " -x, --show-extended       输出时也列出扩展分区，\n"
#~ "                             或输入时请求提供它们的描述符\n"

#~ msgid ""
#~ "     --leave-last          do not allocate the last cylinder\n"
#~ "     --IBM                 same as --leave-last\n"
#~ msgstr ""
#~ "     --leave-last          不分配最后一个柱面\n"
#~ "     --IBM                 同 --leave-last\n"

#~ msgid ""
#~ "     --in-order            partitions are in order\n"
#~ "     --not-in-order        partitions are not in order\n"
#~ "     --inside-outer        all logicals inside outermost extended\n"
#~ "     --not-inside-outer    not all logicals inside outermost extended\n"
#~ msgstr ""
#~ "     --in-order            分区按顺序\n"
#~ "     --not-in-order        分区不按顺序\n"
#~ "     --inside-outer        所有逻辑分区位于最外的扩展分区内\n"
#~ "     --not-inside-outer    不要求所有逻辑分区位于最外的扩展分区内\n"

#~ msgid ""
#~ "     --nested              every partition is disjoint from all others\n"
#~ "     --chained             like nested, but extended partitions may lie outside\n"
#~ "     --onesector           partitions are mutually disjoint\n"
#~ msgstr ""
#~ "     --nested              每个分区与所有其他分区不相交\n"
#~ "     --chained             与 nested 相似，但扩展分区可以超界\n"
#~ "     --onesector           各分区互不相交\n"

#~ msgid ""
#~ "\n"
#~ "Override the detected geometry using:\n"
#~ " -C, --cylinders <number>  set the number of cylinders to use\n"
#~ " -H, --heads <number>      set the number of heads to use\n"
#~ " -S, --sectors <number>    set the number of sectors to use\n"
#~ msgstr ""
#~ "\n"
#~ "用以下选项覆盖检测到的几何属性：\n"
#~ " -C, --cylinders <数字>    设置要使用的柱面数\n"
#~ " -H, --heads <数字>        设置要使用的磁头数\n"
#~ " -S, --sectors <数字>      设置要使用的扇区数n\n"

#~ msgid " %s%sdevice            list active partitions on device\n"
#~ msgstr " %s%sdevice            列出设备上的活动分区\n"

#~ msgid " %s%sdevice n1 n2 ...  activate partitions n1 ..., inactivate the rest\n"
#~ msgstr " %s%s设备 n1 n2 ...  激活分区 n1 ..., 取消激活其他分区\n"

#~ msgid "invalid number of partitions argument"
#~ msgstr "无效的 分区数 参数"

#~ msgid "cannot open %s\n"
#~ msgstr "打不开 %s\n"

#~ msgid "usage: sfdisk --print-id device partition-number"
#~ msgstr "用法：sfdisk --print-id 设备 分区号"

#~ msgid "usage: sfdisk --change-id device partition-number Id"
#~ msgstr "用法：sfdisk --change-id 设备 分区号 Id"

#~ msgid "usage: sfdisk --id device partition-number [Id]"
#~ msgstr "用法：sfdisk --id 设备 分区号 [Id]"

#~ msgid "can specify only one device (except with -l or -s)"
#~ msgstr "只能指定一台设备(除非指定 -l 或 -s)"

#~ msgid "cannot open %s read-write"
#~ msgstr "不能以读写方式打开 %s"

#~ msgid "cannot open %s for reading"
#~ msgstr "不能以读方式打开 %s"

#~ msgid "%s: OK"
#~ msgstr "%s：OK"

#~ msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
#~ msgstr "%s：%ld 个柱面，%ld 个磁头，%ld 个扇区/磁道\n"

#~ msgid "bad active byte: 0x%x instead of 0x80"
#~ msgstr "错误的 活动 字节：0x%x 而非 0x80"

#~ msgid "Done"
#~ msgstr "完成"

#~ msgid ""
#~ "You have %d active primary partitions. This does not matter for LILO,\n"
#~ "but the DOS MBR will only boot a disk with 1 active partition."
#~ msgstr ""
#~ "您有 %d 个活动的主分区。这对 LILO 没有影响，但 DOS MBR 只能启动带一个活动分区\n"
#~ "的磁盘。"

#~ msgid "partition %s has id %x and is not hidden"
#~ msgstr "分区 %s 标识为 %x，不是隐藏的"

#~ msgid "Bad Id %lx"
#~ msgstr "错误的 Id %lx"

#~ msgid "This disk is currently in use."
#~ msgstr "此分区正在使用中。"

#~ msgid "Fatal error: cannot find %s"
#~ msgstr "致命错误：找不到 %s"

#~ msgid "Warning: %s is not a block device"
#~ msgstr "警告：%s 不是一个块设备"

#~ msgid "Partition %d does not exist, cannot change it"
#~ msgstr "分区 %d 不存在，无法更改它"

#~ msgid ""
#~ "I don't like these partitions - nothing changed.\n"
#~ "(If you really want this, use the --force option.)"
#~ msgstr ""
#~ "我不愿这样分区 - 未做更改。\n"
#~ "(如果您真的想这样做，可使用 --force 选项。)"

#~ msgid "I don't like this - probably you should answer No"
#~ msgstr "我不愿这样做 - 建议您取消"

#~ msgid "Are you satisfied with this? [ynq] "
#~ msgstr "这样您满意吗？[ynq] "

#~ msgid "Please answer one of y,n,q\n"
#~ msgstr "请回答 y, n 或 q\n"

#~ msgid ""
#~ "Successfully wrote the new partition table\n"
#~ "\n"
#~ msgstr ""
#~ "成功写入了新分区表\n"
#~ "\n"

#~ msgid ""
#~ "If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
#~ "to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
#~ "(See fdisk(8).)"
#~ msgstr ""
#~ "如果您创建或更改了 DOS 分区，如 /dev/foo7，请使用 dd(1)\n"
#~ "将前 512 个字节清零：dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
#~ "(参阅 fdisk(8)。)"

#~ msgid "gettimeofday failed"
#~ msgstr "gettimeofday 失败"

#~ msgid "sysinfo failed"
#~ msgstr "sysinfo 失败"

#~ msgid "disk: %.*s"
#~ msgstr "磁盘：%.*s"

#~ msgid "label: %.*s"
#~ msgstr "标签：%.*s"

#~ msgid "flags: %s"
#~ msgstr "标志：%s"

#~ msgid "bytes/sector: %ld"
#~ msgstr "字节/扇区：%ld"

#~ msgid "sectors/track: %ld"
#~ msgstr "扇区/磁道：%ld"

#~ msgid "tracks/cylinder: %ld"
#~ msgstr "磁道/柱面：%ld"

#~ msgid "sectors/cylinder: %ld"
#~ msgstr "扇区/柱面：%ld"

#~ msgid "cylinders: %ld"
#~ msgstr "柱面：%ld"

#~ msgid "rpm: %d"
#~ msgstr "转/分：%d"

#~ msgid "interleave: %d"
#~ msgstr "交错：%d"

#~ msgid "trackskew: %d"
#~ msgstr "磁道螺距：%d"

#~ msgid "cylinderskew: %d"
#~ msgstr "柱面螺距：%d"

#~ msgid "headswitch: %ld (milliseconds)"
#~ msgstr "磁头切换：%ld (毫秒)"

#~ msgid "track-to-track seek: %ld (milliseconds)"
#~ msgstr "跨磁道定位：%ld (毫秒)"

#~ msgid "You cannot change a partition into an extended one or vice versa. Delete it first."
#~ msgstr "您不能将分区更改为扩展分区或从扩展分区改回。请先删除该分区。"

#~ msgid "If you have created or modified any DOS 6.x partitions, please see the fdisk documentation for additional information."
#~ msgstr "如果您创建或修改了 DOS 6.x 分区，请查阅 cfdisk 手册页面了解其他信息。"

#~ msgid ""
#~ "Label geometry: %d heads, %llu sectors\n"
#~ "                %llu cylinders, %d physical cylinders\n"
#~ "                %d extra sects/cyl, interleave %d:1\n"
#~ msgstr ""
#~ "标签几何属性：  %d 个磁头，%llu 个扇区\n"
#~ "                %llu 个柱面，%d 个物理柱面\n"
#~ "                %d 个额外扇区/柱面，交错 %d:1\n"

#~ msgid ""
#~ "Label geometry: %d rpm, %d alternate and %d physical cylinders,\n"
#~ "                %d extra sects/cyl, interleave %d:1"
#~ msgstr ""
#~ "标签任何属性：%d rpm, %d 个备用柱面和 %d 个物理柱面，\n"
#~ "                %d 个额外扇区/柱面，交错 %d:1"

#~ msgid "<none>"
#~ msgstr "<无>"

#~ msgid "field is too long"
#~ msgstr "字段过长"

#~ msgid "%s: '%c' is not allowed"
#~ msgstr "%s：不允许“%c”"

#~ msgid "'%c' is not allowed"
#~ msgstr "'%c' 不允许使用"

#~ msgid "%s: control characters are not allowed"
#~ msgstr "%s：不允许使用控制字符"

#~ msgid "control characters are not allowed"
#~ msgstr "不允许使用控制字符"

#~ msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
#~ msgstr "用法：last [-#] [-f 文件] [-t tty] [-h 主机名] [用户 ...]\n"

#~ msgid "%s: mmap failed"
#~ msgstr "%s：mmap 失败"

#~ msgid "  still logged in"
#~ msgstr "  仍然登录"

#~ msgid ""
#~ "\n"
#~ "wtmp begins %s"
#~ msgstr ""
#~ "\n"
#~ "wtmp 开始 %s"

#~ msgid "gethostname failed"
#~ msgstr "gethostname 失败"

#~ msgid ""
#~ "\n"
#~ "interrupted %10.10s %5.5s \n"
#~ msgstr ""
#~ "\n"
#~ "中断了 %10.10s %5.5s \n"

#~ msgid " -m, --supp-groups        display supplementary groups as well\n"
#~ msgstr " -m, --supp-groups        也显示附属组\n"

#~ msgid ""
#~ "\n"
#~ "For more details see lslogins(1).\n"
#~ msgstr ""
#~ "\n"
#~ "更多细节参见 lslogins(1)。\n"

#~ msgid "crypt() failed"
#~ msgstr "crypt() 失败"

#~ msgid "%s: stat failed"
#~ msgstr "%s：stat 失败"

#~ msgid " -h, --help                   This small usage guide\n"
#~ msgstr " -h, --help                   这个简短的用法指南\n"

#~ msgid " -V, --version                Output version information\n"
#~ msgstr " -V, --version                输出版本信息\n"

#~ msgid ""
#~ " -a, --alternative      use alternative dictionary\n"
#~ " -d, --alphanum         compare only alphanumeric characters\n"
#~ " -f, --ignore-case      ignore case differences when comparing\n"
#~ " -t, --terminate <char> define string termination character\n"
#~ " -V, --version          output version information and exit\n"
#~ " -h, --help             display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -a, --alternative      使用替代词典\n"
#~ " -d, --alphanum         只比较字母和数字\n"
#~ " -f, --ignore-case      比较时忽略大小写\n"
#~ " -t, --terminate <字符> 定义字符串终止字符\n"
#~ " -V, --version          输出版本信息并退出\n"
#~ " -h, --help             显示此帮助并退出\n"
#~ "\n"

#~ msgid ""
#~ " -p, --pid <pid>        process id\n"
#~ " -o, --output <list>    define which output columns to use\n"
#~ " -n, --noheadings       don't print headings\n"
#~ " -r, --raw              use the raw output format\n"
#~ " -u, --notruncate       don't truncate text in columns\n"
#~ " -h, --help             display this help and exit\n"
#~ " -V, --version          output version information and exit\n"
#~ msgstr ""
#~ " -p, --pid <pid>        进程标识 ID\n"
#~ " -o, --output <列表>    定义要使用哪些输出列\n"
#~ " -n, --noheadings       不打印标题\n"
#~ " -r, --raw              使用原生输出格式\n"
#~ " -u, --notruncate       不截断列中的文本\n"
#~ " -h, --help             显示此帮助并退出\n"
#~ " -V, --version          输出版本信息并退出\n"

#~ msgid ""
#~ "\n"
#~ "For more information see namei(1).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息参见 namei(1)。\n"

#~ msgid "%s: lstat failed"
#~ msgstr "%s：lstat 失败"

#~ msgid ""
#~ "\n"
#~ "For more information see wipefs(8).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息请参阅 wipefs(8)。\n"

#~ msgid ""
#~ "\n"
#~ "Scheduling policies:\n"
#~ "  -b | --batch         set policy to SCHED_BATCH\n"
#~ "  -f | --fifo          set policy to SCHED_FIFO\n"
#~ "  -i | --idle          set policy to SCHED_IDLE\n"
#~ "  -o | --other         set policy to SCHED_OTHER\n"
#~ "  -r | --rr            set policy to SCHED_RR (default)\n"
#~ msgstr ""
#~ "\n"
#~ "调度策略：\n"
#~ "  -b | --batch         设置为 SCHED_BATCH 策略\n"
#~ "  -f | --fifo          设置为 SCHED_FIFO 策略\n"
#~ "  -i | --idle          设置为 SCHED_IDLE 策略\n"
#~ "  -o | --other         设置为 SCHED_OTHER 策略\n"
#~ "  -r | --rr            设置为 SCHED_RR 策略(默认)\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ "  -a | --all-tasks     operate on all the tasks (threads) for a given pid\n"
#~ "  -h | --help          display this help\n"
#~ "  -m | --max           show min and max valid priorities\n"
#~ "  -p | --pid           operate on existing given pid\n"
#~ "  -v | --verbose       display status information\n"
#~ "  -V | --version       output version information\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ "  -a | --all-tasks     在给定 pid 的所有任务(线程)上操作\n"
#~ "  -h | --help          显示此帮助\n"
#~ "  -m | --max           显示最小和最大有效优先级\n"
#~ "  -p | --pid           在存在的指定 pid 上操作\n"
#~ "  -v | --verbose       显示状态信息\n"
#~ "  -V | --version       输出版本信息\n"
#~ "\n"

#~ msgid ""
#~ "\n"
#~ "For more information see taskset(1).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息请参阅 taskset(1)。\n"

#~ msgid "invalid argument to --manualeject/-i option"
#~ msgstr "--manualeject/-i 选项的参数无效"

#~ msgid "%s: is removable device"
#~ msgstr "%s 不是可移动设备"

#~ msgid "%s: connected by hotplug subsystem: %s"
#~ msgstr "%s：已通过热插拔子系统连接：%s"

#~ msgid "timeout cannot be zero"
#~ msgstr "超时不能为零"

#~ msgid "Need to insert %d second and refer time back %.6f seconds ago\n"
#~ msgid_plural "Need to insert %d seconds and refer time back %.6f seconds ago\n"
#~ msgstr[0] "需要插入 %d 秒并将时间往回指 %.6f 秒\n"

#~ msgid "Sorry, only the superuser can change the System Clock."
#~ msgstr "抱歉，只有超级用户才能设置系统时钟。"

#~ msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
#~ msgstr "抱歉，只有超级用户才能更改内核中的硬件时钟纪元(epoch)。"

#~ msgid "Waiting in loop for time from KDGHWCLK to change\n"
#~ msgstr "正在循环等待来自 KDGHWCLK 的时间更改\n"

#~ msgid "KDGHWCLK ioctl to read time failed"
#~ msgstr "用来读取时间的 KDGHWCLK ioctl 失败"

#~ msgid "KDGHWCLK ioctl to read time failed in loop"
#~ msgstr "在循环中用来读取时间的 KDGHWCLK ioctl 失败"

#~ msgid "ioctl() failed to read time from %s"
#~ msgstr "ioctl() 从 %s 读取时间失败"

#~ msgid "ioctl KDSHWCLK failed"
#~ msgstr "ioctl KDSHWCLK 失败"

#~ msgid "Using the KDGHWCLK interface to m68k clock."
#~ msgstr "将对 m68k 时钟使用 KDGHWCLK 接口。"

#~ msgid "Can't open /dev/tty1 or /dev/vc/1"
#~ msgstr "打不开 /dev/tty1 或 /dev/vc/1"

#~ msgid "KDGHWCLK ioctl failed"
#~ msgstr "KDGHWCLK ioctl 失败"

#~ msgid "read() to %s to wait for clock tick failed"
#~ msgstr "对 %s read() 以等待时钟嘀嗒失败"

#~ msgid ""
#~ "\n"
#~ "For more details see lscpu(1).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息请参阅 lscpu(1)。\n"

#~ msgid ""
#~ " -h, --help              display this help text and exit\n"
#~ " -i, --internal-only     don't call the mount.<type> helpers\n"
#~ " -l, --show-labels       lists all mounts with LABELs\n"
#~ " -n, --no-mtab           don't write to /etc/mtab\n"
#~ msgstr ""
#~ " -h, --help              显示此帮助并退出\n"
#~ " -i, --internal-only     不调用 mount.<类型> 助手程序\n"
#~ " -l, --show-labels       列出所有带有指定标签的挂载\n"
#~ " -n, --no-mtab           不写 /etc/mtab\n"

#~ msgid ""
#~ " -v, --verbose           say what is being done\n"
#~ " -V, --version           display version information and exit\n"
#~ " -w, --rw, --read-write  mount the filesystem read-write (default)\n"
#~ msgstr ""
#~ " -v, --verbose           打印当前进行的操作\n"
#~ " -V, --version           显示版本信息并退出\n"
#~ " -w, --rw, --read-write  以读写方式挂载文件系统(默认)\n"

#~ msgid " %s [options] <program> [args...]\n"
#~ msgstr " %s [选项] <程序> [参数...]\n"

#~ msgid ""
#~ " -g, --pgrp <id>        interpret argument as process group ID\n"
#~ " -n, --priority <num>   specify the nice increment value\n"
#~ " -p, --pid <id>         interpret argument as process ID (default)\n"
#~ " -u, --user <name|id>   interpret argument as username or user ID\n"
#~ " -h, --help             display help text and exit\n"
#~ " -V, --version          display version information and exit\n"
#~ msgstr ""
#~ " -g, --pgrp <id>        将参数解释为进程组 ID\n"
#~ " -n, --priority <数字>  指定 nice 增加值\n"
#~ " -p, --pid <id>         将参数解释为进程 ID (默认)\n"
#~ " -u, --user <名字|id>   将参数解释为用户名或用户 ID\n"
#~ " -h, --help             显示帮助文本并退出\n"
#~ " -V, --version          显示版本信息并退出\n"

#~ msgid ""
#~ "\n"
#~ "For more information see renice(1).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息请参阅 renice(1)。\n"

#~ msgid "set rtc alarm failed"
#~ msgstr "设置 rtc 闹钟失败"

#~ msgid "enable rtc alarm failed"
#~ msgstr "启用 rtc 闹钟失败"

#~ msgid "suspend to \"%s\" unavailable"
#~ msgstr "挂起到“%s”不可用"

#~ msgid " %s%s [options] [program [program arguments]]\n"
#~ msgstr " %s%s [选项] [程序 [程序参数]]\n"

#~ msgid ""
#~ " -a, --all                enable all swaps from /etc/fstab\n"
#~ " -d, --discard[=<policy>] enable swap discards, if supported by device\n"
#~ " -e, --ifexists           silently skip devices that do not exist\n"
#~ " -f, --fixpgsz            reinitialize the swap space if necessary\n"
#~ " -p, --priority <prio>    specify the priority of the swap device\n"
#~ " -s, --summary            display summary about used swap devices (DEPRECATED)\n"
#~ "     --show[=<columns>]   display summary in definable table\n"
#~ "     --noheadings         don't print headings, use with --show\n"
#~ "     --raw                use the raw output format, use with --show\n"
#~ "     --bytes              display swap size in bytes in --show output\n"
#~ " -v, --verbose            verbose mode\n"
#~ msgstr ""
#~ " -a, --all              启用 /etc/fstab 中的所有交换区\n"
#~ " -b, --discard[=<策略>] 启用交换丢弃，如果设备支持\n"
#~ " -e, --ifexists         直接跳过不存在的设备\n"
#~ " -f, --fixpgsz          需要时重新初始化交换空间\n"
#~ " -p, --priority <prio>  指定交换设备的优先级为 <prio>\n"
#~ " -s, --summary          显示已使用交换设备的摘要(已废弃)\n"
#~ "     --show[=<列>]      显示可交换表格的摘要\n"
#~ "     --noheadings       不打印标题，与 --show 一起使用\n"
#~ "     --raw              使用原生输出格式，与 --show 一起使用\n"
#~ "     --bytes            在 --show 选项输出中以字节显示交换区大小\n"
#~ " -v, --verbose          详尽模式\n"

#~ msgid " -u, --uts                 unshare UTS namespace (hostname etc)\n"
#~ msgstr " -u, --uts                 取消共享 UTS 名字空间(主机名等)\n"

#~ msgid " -i, --ipc                 unshare System V IPC namespace\n"
#~ msgstr " -i, --ipc                 取消共享 System V IPC 名字空间\n"

#~ msgid "cannot open: %s: %m"
#~ msgstr "无法打开 %s：%m"

#~ msgid "fread failed"
#~ msgstr "fread 失败"

#~ msgid ""
#~ " -V, --version    output version information and exit\n"
#~ " -h, --help       display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -V, --version    输出版本信息并退出\n"
#~ " -h, --help       显示此帮助并退出\n"
#~ "\n"

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [options] [file ...]\n"
#~ msgstr ""
#~ "\n"
#~ "用法：\n"
#~ " %s [选项] [文件 ...]\n"

#~ msgid ""
#~ " -,  --no-underlining  suppress all underlining\n"
#~ " -2, --half-lines      print all half-lines\n"
#~ " -V, --version         output version information and exit\n"
#~ " -h, --help            display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -,  --no-underlining  抑制所有下划线\n"
#~ " -2, --half-lines      打印所有半线(half-line)\n"
#~ " -V, --version         输出版本信息并退出\n"
#~ " -h, --help            显示此帮助并退出\n"
#~ "\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -V, --version   output version information and exit\n"
#~ " -h, --help      display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ " -V, --version   输出版本信息并退出\n"
#~ " -h, --help      显示此帮助并退出\n"
#~ "\n"

#~ msgid "calling hexdump as od has been deprecated in favor of GNU coreutils od"
#~ msgstr "将 hexdump 作为 od 调用的方式已废弃，请转用 GNU coreutils 的 od"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -V, --version   output version information and exit\n"
#~ " -h, --help      display this help and exit\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ " -V, --version   输出版本信息并退出\n"
#~ " -h, --help      显示此帮助并退出\n"

#~ msgid ""
#~ "\n"
#~ "For more information see rev(1).\n"
#~ msgstr ""
#~ "\n"
#~ "更多信息请参阅 rev(1)。\n"

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [option] file\n"
#~ msgstr ""
#~ "\n"
#~ "用法：\n"
#~ " %s [选项] 文件\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -n, --lines NUMBER  output the last NUMBER lines\n"
#~ " -NUMBER             same as `-n NUMBER'\n"
#~ " -V, --version       output version information and exit\n"
#~ " -h, --help          display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ " -n, --lines NUMBER  输出最后 NUMBER 行\n"
#~ " -NUMBER             同“-n NUMBER”\n"
#~ " -V, --version       输出版本信息并退出\n"
#~ " -h, --help          显示此帮助并退出\n"
#~ "\n"

#~ msgid "can only change local entries."
#~ msgstr "只能更改本地记录。"

#~ msgid "     --time-format <format>  show time stamp using format:\n"
#~ msgstr "     --time-format <格式>    以指定格式显示时间戳：\n"

#~ msgid "                               [notime|short|full|iso]\n"
#~ msgstr "                               [notime|short|full|iso]\n"

#~ msgid " %s [options] pathname [pathname ...]\n"
#~ msgstr " %s [选项] 路径名 [路径名 ...]\n"

#~ msgid "no filename specified."
#~ msgstr "未指定文件名。"

#~ msgid "...back 1 page"
#~ msgstr "...后退 1 页"

#~ msgid "...skipping one line"
#~ msgstr "...跳过一行"

#~ msgid "waidpid failed"
#~ msgstr "waidpid 失败"

#~ msgid " -x, --destination <dir>  extract into directory\n"
#~ msgstr " -x, --destination <目录> 提取到目录\n"

#~ msgid "compiled without -x support"
#~ msgstr "编译时未带有 -x 支持"

#~ msgid "%s: Out of memory!\n"
#~ msgstr "%s：内存不足！\n"

#~ msgid "write failed\n"
#~ msgstr "写失败\n"

#~ msgid "Disk has been changed.\n"
#~ msgstr "磁盘已经更改。\n"

#~ msgid "Reboot the system to ensure the partition table is correctly updated.\n"
#~ msgstr "请重启系统来确保分区表正确更新。\n"

#~ msgid ""
#~ "\n"
#~ "WARNING: If you have created or modified any\n"
#~ "DOS 6.x partitions, please see the cfdisk manual\n"
#~ "page for additional information.\n"
#~ msgstr ""
#~ "\n"
#~ "警告：如果您创建或修改了 DOS 6.x 分区，请\n"
#~ "查阅 cfdisk 手册页面了解其他信息。\n"

#~ msgid "FATAL ERROR"
#~ msgstr "致使错误"

#~ msgid "Press any key to exit cfdisk"
#~ msgstr "按任意键退出 cfdisk"

#~ msgid "Cannot seek on disk drive"
#~ msgstr "在磁盘设备上无法定位"

#~ msgid "Cannot read disk drive"
#~ msgstr "无法读磁盘驱动器"

#~ msgid "Cannot write disk drive"
#~ msgstr "无法写磁盘驱动器"

#~ msgid "Too many partitions"
#~ msgstr "分区过多"

#~ msgid "Partition begins before sector 0"
#~ msgstr "分区起始于扇区 0 之前"

#~ msgid "Partition ends before sector 0"
#~ msgstr "分区终止于扇区 0 之前"

#~ msgid "Partition begins after end-of-disk"
#~ msgstr "分区起始于磁盘终点之后"

#~ msgid "Partition ends after end-of-disk"
#~ msgstr "分区终止于磁盘终点之后"

#~ msgid "logical partitions not in disk order"
#~ msgstr "逻辑分区没有按磁盘顺序"

#~ msgid "logical partitions overlap"
#~ msgstr "逻辑分区重叠"

#~ msgid "enlarged logical partitions overlap"
#~ msgstr "扩大的(enlarged)逻辑分区重叠"

#~ msgid "!!!! Internal error creating logical drive with no extended partition !!!!"
#~ msgstr "!!! 内部错误，在没有扩展分区的情况下创建逻辑分区 !!!"

#~ msgid "Cannot create logical drive here -- would create two extended partitions"
#~ msgstr "无法在此创建逻辑分区 -- 将创建两个扩展分区"

#~ msgid "Menu item too long. Menu may look odd."
#~ msgstr "菜单项过长。菜单可能显示异常。"

#~ msgid "Illegal key"
#~ msgstr "非法的键"

#~ msgid "Create a new primary partition"
#~ msgstr "创建新的主分区"

#~ msgid "Create a new logical partition"
#~ msgstr "创建新的逻辑分区"

#~ msgid "Cancel"
#~ msgstr "取消"

#~ msgid "Don't create a partition"
#~ msgstr "不创建分区"

#~ msgid "!!! Internal error !!!"
#~ msgstr "!!! 内部错误 !!!"

#~ msgid "Size (in MB): "
#~ msgstr "大小(MB)："

#~ msgid "Beginning"
#~ msgstr "开头"

#~ msgid "Add partition at beginning of free space"
#~ msgstr "在剩余空间的开头添加分区"

#~ msgid "Add partition at end of free space"
#~ msgstr "在剩余空间的末尾添加分区"

#~ msgid "No room to create the extended partition"
#~ msgstr "没有空间来创建扩展分区"

#~ msgid "No partition table.\n"
#~ msgstr "无分区表。\n"

#~ msgid "No partition table. Starting with zero table."
#~ msgstr "无分区表。将以空表启动。"

#~ msgid "Bad signature on partition table"
#~ msgstr "分区表签名有误"

#~ msgid "Unknown partition table type"
#~ msgstr "未知的分区表类型"

#~ msgid "Do you wish to start with a zero table [y/N] ?"
#~ msgstr "您想以空表开始吗[y/N]？"

#~ msgid "Cannot open disk drive"
#~ msgstr "无法打开磁盘驱动器"

#~ msgid "Opened disk read-only - you have no permission to write"
#~ msgstr "已用只读方式打开磁盘 - 您没有写权限"

#~ msgid "Cannot get disk size"
#~ msgstr "无法获得磁盘大小"

#~ msgid "Bad primary partition"
#~ msgstr "主分区损坏"

#~ msgid "Warning!!  This may destroy data on your disk!"
#~ msgstr "警告！这可能毁坏您磁盘上的数据！"

#~ msgid "Please enter `yes' or `no'"
#~ msgstr "请输入“是”或“否”"

#~ msgid "Writing partition table to disk..."
#~ msgstr "正在将分区表写入磁盘..."

#~ msgid "Wrote partition table to disk"
#~ msgstr "已将分区表写入磁盘"

#~ msgid "Wrote partition table, but re-read table failed.  Run partprobe(8), kpartx(8) or reboot to update table."
#~ msgstr "已写入分区表，但重新读分区表失败。请运行 partprobe(8)、kpartx(8) 或重启来更新分区表。"

#~ msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
#~ msgstr "没有标记为 可启动 的主分区。DOS MBR 无法启动它。"

#~ msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this."
#~ msgstr "超过一个主分区被标记为 可启动。DOS MBR 无法启动它。"

#~ msgid "Enter filename or press RETURN to display on screen: "
#~ msgstr "输入文件名或按 回车 来显示在屏幕上："

#~ msgid "Disk Drive: %s\n"
#~ msgstr "磁盘驱动器：%s\n"

#~ msgid "Sector 0:\n"
#~ msgstr "扇区 0：\n"

#~ msgid "Sector %d:\n"
#~ msgstr "扇区 %d：\n"

#~ msgid "   None   "
#~ msgstr "   无   "

#~ msgid "   Pri/Log"
#~ msgstr "   主/逻辑"

#~ msgid "   Primary"
#~ msgstr "   主分区"

#~ msgid "   Logical"
#~ msgstr "   逻辑分区"

#~ msgid "(%02X)"
#~ msgstr "(%02X)"

#~ msgid "None"
#~ msgstr "无"

#~ msgid "Partition Table for %s\n"
#~ msgstr "%s 分区表\n"

# 以下三条打印表格的标题行，注意对齐
#~ msgid "               First       Last\n"
#~ msgstr "               起始        终止\n"

#~ msgid " # Type       Sector      Sector   Offset    Length   Filesystem Type (ID) Flag\n"
#~ msgstr " # 类型       扇区        扇区     偏移      长度     文件系统类型 (ID)    标志\n"

#~ msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
#~ msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"

# 以下三条打印表格的标题行，注意对齐
#~ msgid "         ---Starting----      ----Ending-----    Start     Number of\n"
#~ msgstr "         -----开始------      -----结束------    起点      扇区\n"

#~ msgid " # Flags Head Sect  Cyl   ID  Head Sect  Cyl     Sector    Sectors\n"
#~ msgstr " # 标志  磁头 扇区  柱面  ID  磁头 扇区  柱面    扇区      数量\n"

#~ msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
#~ msgstr "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"

#~ msgid "Raw"
#~ msgstr "原生"

#~ msgid "Print the table using raw data format"
#~ msgstr "以原生数据格式打印该表"

#~ msgid "Print the table ordered by sectors"
#~ msgstr "按扇区顺序打印表"

#~ msgid "Table"
#~ msgstr "表"

#~ msgid "Just print the partition table"
#~ msgstr "直接打印分区表"

#~ msgid "Don't print the table"
#~ msgstr "不打印表"

#~ msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
#~ msgstr "版权所有 (C) 1994-1999 Kevin E. Martin & aeb"

#~ msgid "  g          Change cylinders, heads, sectors-per-track parameters"
#~ msgstr "  g          更改柱面、磁头、每个磁道扇区数等参数"

#~ msgid "             WARNING: This option should only be used by people who"
#~ msgstr "             警告：不要使用此选项，除非您"

#~ msgid "             know what they are doing."
#~ msgstr "             清楚这样做的后果。"

#~ msgid "  m          Maximize disk usage of the current partition"
#~ msgstr "  m          使当前分区的磁盘使用最大化"

#~ msgid "             Note: This may make the partition incompatible with"
#~ msgstr "             注：这可能使该分区与以下系统不兼容"

#~ msgid "             DOS, OS/2, ..."
#~ msgstr "             DOS, OS/2, ..."

#~ msgid "  p          Print partition table to the screen or to a file"
#~ msgstr "  p          打印分区表到屏幕或文件"

#~ msgid "             There are several different formats for the partition"
#~ msgstr "             有几种不同的分区格式"

#~ msgid "             that you can choose from:"
#~ msgstr "             供您选择："

#~ msgid "                r - Raw data (exactly what would be written to disk)"
#~ msgstr "                r - 原生(raw)数据(数据会原样写入磁盘)"

#~ msgid "                s - Table ordered by sectors"
#~ msgstr "                s - 按扇区排序的表"

#~ msgid "  u          Change units of the partition size display"
#~ msgstr "  u          更改分区大小的显示单位"

#~ msgid "             Rotates through MB, sectors and cylinders"
#~ msgstr "             在 MB、扇区数、柱面数之间循环"

#~ msgid "CTRL-L       Redraws the screen"
#~ msgstr "CTRL-L       重绘屏幕"

#~ msgid "  ?          Print this screen"
#~ msgstr "  ?          打印此屏幕"

#~ msgid "Change cylinder geometry"
#~ msgstr "更改柱面几何属性"

#~ msgid "Change head geometry"
#~ msgstr "更改磁头几何属性"

#~ msgid "Change sector geometry"
#~ msgstr "更改扇区几何属性"

#~ msgid "Done with changing geometry"
#~ msgstr "更改几何属性完成"

#~ msgid "Enter the number of cylinders: "
#~ msgstr "请输入柱面数："

#~ msgid "Illegal cylinders value"
#~ msgstr "柱面数值不合法"

#~ msgid "Enter the number of heads: "
#~ msgstr "请输入磁头数："

#~ msgid "Illegal heads value"
#~ msgstr "磁头数值不合法"

#~ msgid "Enter the number of sectors per track: "
#~ msgstr "请输入每个磁道的扇区数："

#~ msgid "Illegal sectors value"
#~ msgstr "扇区数值不合法"

#~ msgid "Enter filesystem type: "
#~ msgstr "请输入文件系统类型："

#~ msgid "Cannot change FS Type to empty"
#~ msgstr "无法将文件系统类型更改为空值"

#~ msgid "Cannot change FS Type to extended"
#~ msgstr "无法将文件系统类型更改为扩展"

#~ msgid "Unk(%02X)"
#~ msgstr "未知(%02X)"

#~ msgid ", NC"
#~ msgstr "，不可用"

#~ msgid "NC"
#~ msgstr "不可用"

#~ msgid "Pri/Log"
#~ msgstr "主/逻辑"

#~ msgid "Unknown (%02X)"
#~ msgstr "未知 (%02X)"

#~ msgid "Disk Drive: %s"
#~ msgstr "磁盘驱动器：%s"

#~ msgid "Size: %lld bytes, %lld MB"
#~ msgstr "大小：%lld 字节，%lld MB"

#~ msgid "Size: %lld bytes, %lld.%lld GB"
#~ msgstr "大小：%lld 字节，%lld.%lld GB"

#~ msgid "Heads: %d   Sectors per Track: %d   Cylinders: %lld"
#~ msgstr "磁头数：%d  每磁道扇区数：%d        柱面数：%lld"

#~ msgid "Part Type"
#~ msgstr "分区类型"

#~ msgid "FS Type"
#~ msgstr "文件系统"

#~ msgid "[Label]"
#~ msgstr "[标签]"

#~ msgid "    Sectors"
#~ msgstr "    扇区"

#~ msgid "  Cylinders"
#~ msgstr "  柱面"

#~ msgid "  Size (MB)"
#~ msgstr "  大小 (MB)"

#~ msgid "  Size (GB)"
#~ msgstr "  大小 (GB)"

#~ msgid "No more partitions"
#~ msgstr "没有更多分区"

#~ msgid "Change disk geometry (experts only)"
#~ msgstr "更改磁盘的几何属性(仅限专业人员)"

#~ msgid "Maximize"
#~ msgstr "最大化"

#~ msgid "Maximize disk usage of the current partition (experts only)"
#~ msgstr "当前分区的最大磁盘使用量(仅限专业人员)"

#~ msgid "Print"
#~ msgstr "打印"

#~ msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
#~ msgstr "更改文件系统类型(DOS, Linux, OS/2 等)"

#~ msgid "Units"
#~ msgstr "单位"

#~ msgid "Change units of the partition size display (MB, sect, cyl)"
#~ msgstr "更改分区大小的单位(MB、扇区，柱面)"

#~ msgid "Cannot make this partition bootable"
#~ msgstr "无法将此分区标记为 可启动"

#~ msgid "Cannot delete an empty partition"
#~ msgstr "无法删除空分区"

#~ msgid "Cannot maximize this partition"
#~ msgstr "无法最大化此分区"

#~ msgid "This partition is unusable"
#~ msgstr "此分区无法使用"

#~ msgid "This partition is already in use"
#~ msgstr "此分区已在使用中"

#~ msgid "Cannot change the type of an empty partition"
#~ msgstr "无法更改空分区的类型"

#~ msgid "Illegal command"
#~ msgstr "非法命令"

#~ msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
#~ msgstr "版权所有 (C) 1994-2002 Kevin E. Martin & aeb\n"

#~ msgid " -h, --heads <number>      set the number of heads to use\n"
#~ msgstr " -h, --heads <数字>        设置要使用的磁头数\n"

#~ msgid " -g, --guess               guess a geometry from partition table\n"
#~ msgstr " -g, --guess               根据分区表推算几何属性\n"

#~ msgid " -P, --print <r|s|t>       print partition table in specified format\n"
#~ msgstr " -P, --print <r|s|t>       以指定的格式打印分区表\n"

#~ msgid " -a, --arrow               use arrow for highlighting the current partition\n"
#~ msgstr " -a, --arrow               用箭头突出显示当前分区\n"

#~ msgid "cannot parse number of cylinders"
#~ msgstr "无法解析柱面数"

#~ msgid "cannot parse number of heads"
#~ msgstr "无法解析磁头数"

#~ msgid "cannot parse number of sectors"
#~ msgstr "无法解析扇区数"

#~ msgid ": "
#~ msgstr "："

#~ msgid " -b <size>         sector size (512, 1024, 2048 or 4096)\n"
#~ msgstr " -b <size>         扇区大小(512, 1024, 2048 或 4096)\n"

#~ msgid " -h                print this help text\n"
#~ msgstr " -h                显示此帮助并退出\n"

#~ msgid "#"
#~ msgstr "#"

#~ msgid "fsize"
#~ msgstr "fsize"

#~ msgid "bsize"
#~ msgstr "bsize"

#~ msgid "Partition %d is already defined.  Delete it before re-adding it."
#~ msgstr "分区 %d 已经定义。请删除它再重新添加。"

#~ msgid ""
#~ "Partition type:\n"
#~ "   p   primary (%zd primary, %d extended, %zd free)\n"
#~ "%s\n"
#~ "Select (default %c)"
#~ msgstr ""
#~ "分区类型：\n"
#~ "   p   主分区(%zd 个主分区，%d 个扩展分区，%zd 空闲)\n"
#~ "%s\n"
#~ "请选择(默认为 %c)："

#~ msgid "   e   extended"
#~ msgstr "   e   扩展分区"

#~ msgid "Nr"
#~ msgstr "Nr"

#~ msgid "AF"
#~ msgstr "AF"

#~ msgid "Hd"
#~ msgstr "Hd"

#~ msgid "Sec"
#~ msgstr "Sec"

#~ msgid "Cyl"
#~ msgstr "Cyl"

#~ msgid "This doesn't look like a partition table. Probably you selected the wrong device."
#~ msgstr "这似乎不是分区表。您可能选错了设备。"

#~ msgid "Blocks "
#~ msgstr "块 "

#~ msgid "System"
#~ msgstr "系统"

#~ msgid "Partition %zd is already defined. Delete it before re-adding it."
#~ msgstr "分区 %zd 已定义。请删除它再重新添加。"

#~ msgid "Pt#"
#~ msgstr "Pt#"

#~ msgid "Info"
#~ msgstr "信息"

#~ msgid "Sector"
#~ msgstr "扇区"

#~ msgid "You will get a partition overlap on the disk. Fix it first!"
#~ msgstr "磁盘上将产生重叠分区。请先修复它！"

#~ msgid "Warning:  BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu. This value may be truncated for devices > 33.8 GB."
#~ msgstr "警告：对 %s 执行 BLKGETSIZE ioctl 失败。将使用柱面值 %llu。对大于 33.8GB 的设备这个值可能会截短。"

#~ msgid "Flag"
#~ msgstr "标志"

#~ msgid ""
#~ " %1$s [options] LABEL=<label>\n"
#~ " %1$s [options] UUID=<uuid>\n"
#~ msgstr ""
#~ " %1$s [选项] LABEL=<label>\n"
#~ " %1$s [选项] UUID=<uuid>\n"

#~ msgid ""
#~ " -A, --all              disable all built-in filters, print all filesystems\n"
#~ " -a, --ascii            use ASCII chars for tree formatting\n"
#~ " -c, --canonicalize     canonicalize printed paths\n"
#~ " -D, --df               imitate the output of df(1)\n"
#~ " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
#~ " -e, --evaluate         convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
#~ "                          to device names\n"
#~ " -F, --tab-file <path>  alternative file for --fstab, --mtab or --kernel options\n"
#~ " -f, --first-only       print the first found filesystem only\n"
#~ msgstr ""
#~ " -A, --all              禁用所有内建过滤器，打印所有文件系统\n"
#~ " -a, --ascii            使用 ASCII 进行树格式化\n"
#~ " -c, --canonicalize     规范输出路径\n"
#~ " -D, --df               仿照 df(1) 形式输出\n"
#~ " -d, --direction <词>   搜索方向，“forward”或“backward”\n"
#~ " -e, --evaluate         将标志(LABEL,UUID,PARTUUID,PARTLABEL)\n"
#~ "                          转换为设备名\n"
#~ " -F, --tab-file <路径>  --fstab、--mtab 或 --kernel 选项的备选文件\n"
#~ " -f, --first-only       只打印找到的第一个文件系统\n"

#~ msgid ""
#~ " -i, --invert           invert the sense of matching\n"
#~ " -l, --list             use list format output\n"
#~ " -N, --task <tid>       use alternative namespace (/proc/<tid>/mountinfo file)\n"
#~ " -n, --noheadings       don't print column headings\n"
#~ " -u, --notruncate       don't truncate text in columns\n"
#~ msgstr ""
#~ " -i, --invert           反转匹配规则\n"
#~ " -l, --list             使用列表格式的输出\n"
#~ " -N, --task <tid>       使用备选名字空间(/proc/<tid>/mountinfo 文件)\n"
#~ " -n, --noheadings       不打印列标题\n"
#~ " -u, --notruncate       不截短列中的文本\n"

#~ msgid ""
#~ " -v, --nofsroot         don't print [/dir] for bind or btrfs mounts\n"
#~ " -R, --submounts        print all submounts for the matching filesystems\n"
#~ " -S, --source <string>  the device to mount (by name, maj:min, \n"
#~ "                          LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
#~ " -T, --target <string>  the mountpoint to use\n"
#~ msgstr ""
#~ " -v, --nofsroot         bind 或 btrfs 挂臷时不打印 [/dir]\n"
#~ " -R, --submounts        打印匹配文件系统的所有子挂臷\n"
#~ " -S, --source <字符串>  要挂臷的设备(按名称、主设备号：次设备号、\n"
#~ "                          LABEL=、UUID=、ARTUUID=、ARTLABEL=)\n"
#~ " -T, --target <字符串>  要使用的挂臷点\n"

#~ msgid ""
#~ " -f, --file <file> use file as a cookie seed\n"
#~ " -v, --verbose     explain what is being done\n"
#~ " -V, --version     output version information and exit\n"
#~ " -h, --help        display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -f, --file <文件> 使用指定文件作为 cookie seed\n"
#~ " -v, --verbose     解释正在进行的操作\n"
#~ " -V, --version     输出版本信息并退出\n"
#~ " -h, --help        显示此帮助并退出\n"
#~ "\n"

#~ msgid "Both --pid and --no-pid specified. Ignoring --no-pid."
#~ msgstr "同时指定了 --pid 和 --no-pid。将忽略 --no-pid。"

#~ msgid "warning: error reading %s: %s"
#~ msgstr "警告：读取 %s 出错：%s"

#~ msgid "warning: can't open %s: %s"
#~ msgstr "警告：打不开 %s：%s"

#~ msgid "mount: could not open %s - using %s instead\n"
#~ msgstr "挂载：打不开 %s - 将转用 %s\n"

#~ msgid "can't create lock file %s: %s (use -n flag to override)"
#~ msgstr "无法创建锁文件 %s：%s (可使用 -n 标志覆盖)"

#~ msgid "can't link lock file %s: %s (use -n flag to override)"
#~ msgstr "无法链接锁文件 %s：%s (可使用 -n 标志覆盖)"

#~ msgid "can't open lock file %s: %s (use -n flag to override)"
#~ msgstr "打不开锁文件 %s：%s (可使用 -n 标志覆盖)"

#~ msgid "Can't lock lock file %s: %s\n"
#~ msgstr "无法锁定锁文件 %s：%s\n"

#~ msgid "can't lock lock file %s: %s"
#~ msgstr "无法锁定锁文件 %s：%s"

#~ msgid ""
#~ "Cannot create link %s\n"
#~ "Perhaps there is a stale lock file?\n"
#~ msgstr ""
#~ "无法创建链接 %s\n"
#~ "有一个过期的锁文件吗？\n"

#~ msgid "cannot open %s (%s) - mtab not updated"
#~ msgstr "无法打开 %s (%s) - mtab 未更新"

#~ msgid "error writing %s: %s"
#~ msgstr "写 %s 出错：%s"

#~ msgid "error changing mode of %s: %s\n"
#~ msgstr "更改 %s 的模式出错：%s\n"

#~ msgid "error changing owner of %s: %s\n"
#~ msgstr "更改 %s 的所有者失败：%s\n"

#~ msgid ""
#~ "\n"
#~ "mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
#~ "       It's possible that information reported by mount(8) is not\n"
#~ "       up to date. For actual information about system mount points\n"
#~ "       check the /proc/mounts file.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "mount：/etc/mtab 不可写(比如是只读文件系统)。\n"
#~ "       mount(8) 报告的信息可能不是最新的。\n"
#~ "       有关系统挂载点的实际信息请检查\n"
#~ "       /proc/mounts 获取。\n"
#~ "\n"

#~ msgid "mount: improperly quoted option string '%s'"
#~ msgstr "mount：选项字符串“%s”引号没有正确闭合"

#~ msgid "mount: translated %s '%s' to '%s'\n"
#~ msgstr "mount：已将 %s “%s”转换为“%s”\n"

#~ msgid "mount: SELinux *context= options are ignore on remount.\n"
#~ msgstr "mount：SELinux *context= 选项重新挂载会时忽略。\n"

#~ msgid "mount: according to mtab, %s is already mounted on %s"
#~ msgstr "mount：根据 mtab，%s 已挂载于 %s"

#~ msgid "mount: according to mtab, %s is mounted on %s"
#~ msgstr "mount：根据 mtab，%s 挂载于 %s"

#~ msgid "mount: can't open %s for writing: %s"
#~ msgstr "mount：无法打开 %s 进行写入：%s"

#~ msgid "mount: error writing %s: %s"
#~ msgstr "mount：写 %s 出错：%s"

#~ msgid "mount: error changing mode of %s: %s"
#~ msgstr "mount：更改 %s 的模式出错：%s"

#~ msgid "mount: cannot set group id: %m"
#~ msgstr "mount：无法设置组 id：%m"

#~ msgid "mount: cannot set user id: %m"
#~ msgstr "mount：无法设置用户 id：%m"

#~ msgid "mount: cannot fork: %s"
#~ msgstr "mount：无法 fork：%s"

#~ msgid "Trying %s\n"
#~ msgstr "正在尝试 %s\n"

#~ msgid "mount: you didn't specify a filesystem type for %s\n"
#~ msgstr "mount：您没有指定 %s 的文件系统类型\n"

#~ msgid "       I will try all types mentioned in %s or %s\n"
#~ msgstr "       程序将尝试 %s 或 %s 中提到的所有类型\n"

#~ msgid "       and it looks like this is swapspace\n"
#~ msgstr "       这似乎是交换空间\n"

#~ msgid "       I will try type %s\n"
#~ msgstr "       程序将尝试 %s 类型\n"

#~ msgid "%s looks like swapspace - not mounted"
#~ msgstr "%s 似乎是交换空间 - 未挂载"

#~ msgid ""
#~ "mount: %s: more filesystems detected. This should not happen,\n"
#~ "       use -t <type> to explicitly specify the filesystem type or\n"
#~ "       use wipefs(8) to clean up the device.\n"
#~ msgstr ""
#~ "mount：%s：检测到了更多文件系统。这不应该发生， \n"
#~ "       请使用 -t <类型> 来明确指定文件系统类型或\n"
#~ "       使用 wipefs(8) 来清理设备。\n"

#~ msgid "mount: only root can mount %s on %s"
#~ msgstr "mount：只有 root 才能将 %s 挂载于 %s"

#~ msgid "mount: loop device specified twice"
#~ msgstr "mount：回环设备指定了两次"

#~ msgid "mount: skipping the setup of a loop device\n"
#~ msgstr "mount：将跳过回环设备的设置\n"

#~ msgid "mount: enabling autoclear loopdev flag\n"
#~ msgstr "mount：将启用 自动清除 环回设备标志\n"

#~ msgid "mount: invalid offset '%s' specified"
#~ msgstr "mount：指定了无效的偏移“%s”"

#~ msgid "mount: invalid sizelimit '%s' specified"
#~ msgstr "mount：指定了无效的大小限制“%s”"

#~ msgid "mount: according to mtab %s is already mounted on %s as loop"
#~ msgstr "mount：根据 mtab，%s 已作为回环设备挂载于 %s"

#~ msgid "encryption not supported, use cryptsetup(8) instead"
#~ msgstr "不支持加密，请改用 cryptsetup(8)"

#~ msgid "mount: failed to initialize loopdev context"
#~ msgstr "mount：初始化 loopdev 环境失败"

#~ msgid "mount: failed to use %s device"
#~ msgstr "mount：使用 %s 设备失败"

#~ msgid "mount: failed to found free loop device"
#~ msgstr "mount：查找空闲的回环设备失败"

#~ msgid "mount: going to use the loop device %s\n"
#~ msgstr "mount：将使用回环设备 %s\n"

#~ msgid "mount: %s: failed to set loopdev attributes"
#~ msgstr "mount：%s：设置回环设备属性失败"

#~ msgid "mount: %s: failed setting up loop device: %m"
#~ msgstr "挂臷：%s：设置回环设备失败：%m"

#~ msgid "mount: stolen loop=%s ...trying again\n"
#~ msgstr "mount：被挪用回环=%s ...将重试\n"

#~ msgid "mount: stolen loop=%s"
#~ msgstr "挂载：被挪用回环=%s"

#~ msgid "mount: setup loop device successfully\n"
#~ msgstr "mount：设置回环设备成功\n"

#~ msgid "mount: no %s found - creating it..\n"
#~ msgstr "mount：未找到 %s - 将创建它...\n"

#~ msgid "mount: cannot open %s for setting speed"
#~ msgstr "mount：无法打开 %s 来设置速度"

#~ msgid "mount: cannot set speed: %m"
#~ msgstr "mount：无法设置速度：%m"

#~ msgid "mount: according to mtab, %s is already mounted on %s\n"
#~ msgstr "mount：根据 mtab，%s 已挂载于 %s\n"

#~ msgid "mount: warning: %s seems to be mounted read-write.\n"
#~ msgstr "mounted：警告：%s 似乎是以读写方式挂载的。\n"

#~ msgid "mount: warning: %s seems to be mounted read-only.\n"
#~ msgstr "挂载：警告：%s 似乎是以只读方式挂载的。\n"

#~ msgid "mount: I could not determine the filesystem type, and none was specified"
#~ msgstr "mount：程序无法确定文件系统类型，并且没有指定"

#~ msgid "mount: you must specify the filesystem type"
#~ msgstr "mount：您必须指定文件系统类型"

#~ msgid "mount: mount failed"
#~ msgstr "mount：挂载失败"

#~ msgid "mount: mount point %s is not a directory"
#~ msgstr "mount：挂载点 %s 不是一个目录"

#~ msgid "mount: permission denied"
#~ msgstr "mount：权限不足"

#~ msgid "mount: must be superuser to use mount"
#~ msgstr "mount：必须是超级用户才能使用 mount"

#~ msgid "mount: proc already mounted"
#~ msgstr "mount：proc 已挂载"

#~ msgid "mount: %s already mounted or %s busy"
#~ msgstr "mount：%s 已挂载或 %s 忙"

#~ msgid "mount: mount point %s does not exist"
#~ msgstr "mount：挂载点 %s 不存在"

#~ msgid "mount: mount point %s is a symbolic link to nowhere"
#~ msgstr "mount：挂载点 %s 是一个没有目标位置的符号链接"

#~ msgid "mount: special device %s does not exist"
#~ msgstr "mount：特殊设备 %s 不存在"

#~ msgid ""
#~ "mount: special device %s does not exist\n"
#~ "       (a path prefix is not a directory)\n"
#~ msgstr ""
#~ "mount：特殊设备 %s 不存在\n"
#~ "       (路径前缀不是目录)\n"

#~ msgid ""
#~ "mount: wrong fs type, bad option, bad superblock on %s,\n"
#~ "       missing codepage or helper program, or other error"
#~ msgstr ""
#~ "mount：文件系统类型错误、选项错误、%s 有坏超级块，\n"
#~ "       缺少代码页或助手程序，或其他错误"

#~ msgid ""
#~ "       (could this be the IDE device where you in fact use\n"
#~ "       ide-scsi so that sr0 or sda or so is needed?)"
#~ msgstr ""
#~ "       (这是不是一台通过 ide-scsi 方式使用的 IDE 设备，\n"
#~ "       因而需要 sr0 或 sda 或 so？)"

#~ msgid ""
#~ "       (aren't you trying to mount an extended partition,\n"
#~ "       instead of some logical partition inside?)"
#~ msgstr ""
#~ "       (您不是要试图挂载一个扩展分区，而非扩展分区中的\n"
#~ "       一些逻辑分区吧？)"

#~ msgid ""
#~ "       In some cases useful info is found in syslog - try\n"
#~ "       dmesg | tail  or so\n"
#~ msgstr ""
#~ "       有些情况下在 syslog 中可以找到一些有用信息- 请尝试\n"
#~ "       dmesg | tail  这样的命令看看。\n"

#~ msgid "mount: %s: can't read superblock"
#~ msgstr "mount：%s：无法读取超级块"

#~ msgid "mount: %s: unknown device"
#~ msgstr "mount：%s：未知设备"

#~ msgid "mount: unknown filesystem type '%s'"
#~ msgstr "mount：未知文件系统类型“%s”"

#~ msgid "mount: probably you meant %s"
#~ msgstr "mount：您可能指的是 %s"

#~ msgid "mount: maybe you meant 'iso9660'?"
#~ msgstr "mount：可能您指的是“iso9660”？"

#~ msgid "mount: maybe you meant 'vfat'?"
#~ msgstr "mount：可能您指的是“vfat”？"

#~ msgid "mount: %s has wrong device number or fs type %s not supported"
#~ msgstr "mount：%s 设备号错误或不支持文件系统 %s"

#~ msgid "mount: %s is not a block device, and stat fails?"
#~ msgstr "mount：%s 不是块设备，且 stat 命令失败？"

#~ msgid ""
#~ "mount: the kernel does not recognize %s as a block device\n"
#~ "       (maybe `modprobe driver'?)"
#~ msgstr ""
#~ "mount：内核无法将 %s 识别为块设备\n"
#~ "       (试试“modprobe driver”？)"

#~ msgid "mount: %s is not a block device (maybe try `-o loop'?)"
#~ msgstr "mount：%s 不是块设备(要不试试“-o loop”？)"

#~ msgid "mount: %s is not a block device"
#~ msgstr "mount：%s 不是块设备"

#~ msgid "mount: %s is not a valid block device"
#~ msgstr "mount：%s 不是有效的块设备"

#~ msgid "mount: cannot mount %s%s read-only"
#~ msgstr "mount：无法以只读方式挂载 %s%s"

#~ msgid "mount: %s%s is write-protected but explicit `-w' flag given"
#~ msgstr "mount：%s%s 是写保护的，但指明了“-w”标志"

#~ msgid "mount: cannot remount %s%s read-write, is write-protected"
#~ msgstr "mount：无法以读写方式重新挂载 %s%s，它是写保护的"

#~ msgid "mount: %s%s is write-protected, mounting read-only"
#~ msgstr "mount：%s%s 写保护，将以只读方式挂载"

#~ msgid "mount: no medium found on %s"
#~ msgstr "mount：在 %s 上找不到媒体"

#~ msgid "mount: no type was given - I'll assume nfs because of the colon\n"
#~ msgstr "mount：没有指定类型 - 程序将根据冒号假定为 nfs\n"

#~ msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
#~ msgstr "mount：没有指定类型 - 程序将根据 // 前缀假定为 cifs\n"

#~ msgid "mount: ignore %s (unparsable offset= option)\n"
#~ msgstr "mount：忽略 %s(无法解析的 offset= 选项)\n"

#~ msgid ""
#~ "Usage: mount -V                 : print version\n"
#~ "       mount -h                 : print this help\n"
#~ "       mount                    : list mounted filesystems\n"
#~ "       mount -l                 : idem, including volume labels\n"
#~ "So far the informational part. Next the mounting.\n"
#~ "The command is `mount [-t fstype] something somewhere'.\n"
#~ "Details found in /etc/fstab may be omitted.\n"
#~ "       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab\n"
#~ "       mount device             : mount device at the known place\n"
#~ "       mount directory          : mount known device here\n"
#~ "       mount -t type dev dir    : ordinary mount command\n"
#~ "Note that one does not really mount a device, one mounts\n"
#~ "a filesystem (of the given type) found on the device.\n"
#~ "One can also mount an already visible directory tree elsewhere:\n"
#~ "       mount --bind olddir newdir\n"
#~ "or move a subtree:\n"
#~ "       mount --move olddir newdir\n"
#~ "One can change the type of mount containing the directory dir:\n"
#~ "       mount --make-shared dir\n"
#~ "       mount --make-slave dir\n"
#~ "       mount --make-private dir\n"
#~ "       mount --make-unbindable dir\n"
#~ "One can change the type of all the mounts in a mount subtree\n"
#~ "containing the directory dir:\n"
#~ "       mount --make-rshared dir\n"
#~ "       mount --make-rslave dir\n"
#~ "       mount --make-rprivate dir\n"
#~ "       mount --make-runbindable dir\n"
#~ "A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
#~ "or by label, using  -L label  or by uuid, using  -U uuid .\n"
#~ "Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
#~ "For many more details, say  man 8 mount .\n"
#~ msgstr ""
#~ "用法： mount -V                 : 打印版本\n"
#~ "       mount -h                 : 打印此帮助\n"
#~ "       mount                    : 列出已挂臷的文件系统\n"
#~ "       mount -l                 : 同上，包含卷标\n"
#~ "以上为信息部分。以下是挂臷。\n"
#~ "挂臷命令为“mount [-t 文件系统类型] 待挂臷项 挂臷位置”。\n"
#~ "在 /etc/fstab 中列出的细节可以忽略。\n"
#~ "       mount -a [-t|-O] ...     : 挂臷 /etc/fstab 中的所有项\n"
#~ "       mount 设备               : 挂臷未知位置的设备\n"
#~ "       mount 目录               : 将已知设备挂臷到此处\n"
#~ "       mount -t 类型 设备 目录  : 正常挂臷命令\n"
#~ "注意，挂臷设备其实是(以指定类型)挂臷设备上的文件系统。\n"
#~ "\n"
#~ "也可以将已经可见的目录树挂臷到别处：\n"
#~ "       mount --bind 旧目录 新目录\n"
#~ "或移动子树：\n"
#~ "       mount --move 旧目录 新目录\n"
#~ "可以改变包含 dir 目录的挂臷的类型：\n"
#~ "       mount --make-shared dir\n"
#~ "       mount --make-slave dir\n"
#~ "       mount --make-private dir\n"
#~ "       mount --make-unbindable dir\n"
#~ "可以指定包含 dir 目录的已挂臷子树中\n"
#~ "所有挂臷的类型：\n"
#~ "       mount --make-rshared dir\n"
#~ "       mount --make-rslave dir\n"
#~ "       mount --make-rprivate dir\n"
#~ "       mount --make-runbindable dir\n"
#~ "可以通过名称指定设备，如 /dev/hda1 或 /dev/cdrom，\n"
#~ "或使用 -L 标签 按标签指定设备，或者使用 -U uuid 按 uuid 指定。\n"
#~ "其他选项：[-nfFrsvw] [-o 选项] [-p 密码文件描述符].\n"
#~ "更多细节，请输入 man 8 mount 了解。\n"

#~ msgid "--pass-fd is no longer supported"
#~ msgstr "--pass-fd 已不再支持"

#~ msgid "mount: only root can do that (effective UID is %u)"
#~ msgstr "挂臷：只有 root 用户才能执行(有效 UID 为 %u)"

#~ msgid "mount: only root can do that"
#~ msgstr "挂臷：只有 root 用户才能执行"

#~ msgid "nothing was mounted"
#~ msgstr "未挂臷任何项目"

#~ msgid "mount: no such partition found"
#~ msgstr "挂臷：没有找到该分区"

#~ msgid "mount: can't find %s in %s or %s"
#~ msgstr "mount：在 %2$s 或 %3$s 中找不到 %1$s"

#~ msgid "[mntent]: warning: no final newline at the end of %s\n"
#~ msgstr "[mntent]：警告：%s 末尾没有以空行结束\n"

#~ msgid "[mntent]: line %d in %s is bad%s\n"
#~ msgstr "[mntent]：%2$s 中的第 %1$d 行有误%3$s\n"

#~ msgid "; rest of file ignored"
#~ msgstr "；文件的其余部分被忽略"

#~ msgid "umount: compiled without support for -f\n"
#~ msgstr "umount：编译时未添加 -f 支持\n"

#~ msgid "umount: cannot set group id: %m"
#~ msgstr "umount：无法设置组 id：%m"

#~ msgid "umount: cannot set user id: %m"
#~ msgstr "umount：无法设置用户 id：%m"

#~ msgid "umount: cannot fork: %s"
#~ msgstr "umount：无法 fork：%s"

#~ msgid "umount: %s: invalid block device"
#~ msgstr "umount：%s：无效的块设备"

#~ msgid "umount: %s: not mounted"
#~ msgstr "umount：%s：未挂载"

#~ msgid "umount: %s: can't write superblock"
#~ msgstr "umount：%s：无法写超级块"

#~ msgid ""
#~ "umount: %s: device is busy.\n"
#~ "        (In some cases useful info about processes that use\n"
#~ "         the device is found by lsof(8) or fuser(1))"
#~ msgstr ""
#~ "umount：%s：设备忙。\n"
#~ "        (有些情况下在 lsof(8) 或 fuser(1)) 中可以找到\n"
#~ "         有关使用该设备的进程的有用信息"

#~ msgid "umount: %s: not found"
#~ msgstr "umount：%s：未找到"

#~ msgid "umount: %s: must be superuser to umount"
#~ msgstr "umount：%s：只有超级用户才能卸载"

#~ msgid "umount: %s: block devices not permitted on fs"
#~ msgstr "umount：%s：文件系统上不允许块设备"

#~ msgid "umount: %s: %s"
#~ msgstr "umount：%s：%s"

#~ msgid "umount: internal error: invalid abs path: %s"
#~ msgstr "umount：内部错误：无效的绝对路径：%s"

#~ msgid "umount: failed to chdir to %s: %m"
#~ msgstr "umount：更改目录到 %s 失败：%m"

#~ msgid "umount: failed to obtain current directory: %m"
#~ msgstr "umount：获取当前目录失败：%m"

#~ msgid "umount: mountpoint moved (%s -> %s)"
#~ msgstr "umount：挂载点已移动(%s -> %s)"

#~ msgid "current directory moved to %s\n"
#~ msgstr "当前目录已移动到 %s\n"

#~ msgid "no umount2, trying umount...\n"
#~ msgstr "无 umount2，将尝试 umount...\n"

#~ msgid "umount: %s busy - remounted read-only\n"
#~ msgstr "umount：%s 忙 - 已重新挂载为只读\n"

#~ msgid "umount: could not remount %s read-only\n"
#~ msgstr "umount：无法以只读方式重新挂载 %s\n"

#~ msgid "%s has been unmounted\n"
#~ msgstr "%s 已经卸载\n"

#~ msgid "umount: cannot find list of filesystems to unmount"
#~ msgstr "umount：找不到要卸载的文件系统列表"

#~ msgid ""
#~ "Usage: umount -h | -V\n"
#~ "       umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
#~ "       umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
#~ msgstr ""
#~ "用法：umount -h | -V\n"
#~ "       umount -a [-d] [-f] [-r] [-n] [-v] [-t 文件系统类型] [-O 选项]\n"
#~ "       umount [-d] [-f] [-r] [-n] [-v] 特殊 | 节点...\n"

#~ msgid "failed to parse 'offset=%s' options\n"
#~ msgstr "解析 'offset=%s' 选项失败\n"

#~ msgid "device %s is associated with %s\n"
#~ msgstr "设备 %s 与 %s 关联\n"

#~ msgid "device %s is not associated with %s\n"
#~ msgstr "设备 %s 未与 %s 关联\n"

#~ msgid "Cannot unmount \"\"\n"
#~ msgstr "无法卸载 \"\"\n"

#~ msgid "umount: confused when analyzing mtab"
#~ msgstr "umount：分析 mtab 时出现混乱"

#~ msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
#~ msgstr "umount：无法卸载 %s -- %s 已在同一挂载点上挂载替换了它"

#~ msgid "Could not find %s in mtab\n"
#~ msgstr "在 mtab 中找不到 %s\n"

#~ msgid "umount: warning: %s is associated with more than one loop device\n"
#~ msgstr "umount：警告：%s 与超过一个回环设备关联\n"

#~ msgid "umount: %s is not mounted (according to mtab)"
#~ msgstr "umount：%s 未挂载(从 mtab 得知)"

#~ msgid "umount: it seems %s is mounted multiple times"
#~ msgstr "umount：似乎 %s 挂载了多次"

#~ msgid "umount: %s is not in the fstab (and you are not root)"
#~ msgstr "umount：%s 不在 fstab 中(并且您不是 root 用户)"

#~ msgid "umount: %s mount disagrees with the fstab"
#~ msgstr "umount：%s 挂载与 fstab 不一致"

#~ msgid "umount: only %s can unmount %s from %s"
#~ msgstr "umount：只有 %s 可以从 %s 上卸载 %s"

#~ msgid "umount: only root can do that"
#~ msgstr "umount：只有 root 能执行该操作"

#~ msgid ""
#~ "\n"
#~ "%1$s - sets or gets process io scheduling class and priority.\n"
#~ "\n"
#~ "Usage:\n"
#~ "  %1$s [OPTION] -p PID [PID...]\n"
#~ "  %1$s [OPTION] COMMAND\n"
#~ "\n"
#~ "Options:\n"
#~ "  -c, --class <class>   scheduling class name or number\n"
#~ "                           0: none, 1: realtime, 2: best-effort, 3: idle\n"
#~ "  -n, --classdata <num> scheduling class data\n"
#~ "                           0-7 for realtime and best-effort classes\n"
#~ "  -p, --pid=PID         view or modify already running process\n"
#~ "  -t, --ignore          ignore failures\n"
#~ "  -V, --version         output version information and exit\n"
#~ "  -h, --help            display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "%1$s - 设置或获取进程 io 调度类别和优先级。\n"
#~ "\n"
#~ "用法：\n"
#~ "  %1$s [选项] -p PID [PID...]\n"
#~ "  %1$s [选项] 命令\n"
#~ "\n"
#~ "选项：\n"
#~ "  -c, --class <类>      调度类别名或数字\n"
#~ "                           0：无，1：实时，2：尽量(best-effort)，3：空闲\n"
#~ "  -n, --classdata <数字> 调度类别数据\n"
#~ "                           0-7，针对 实时 和 尽量 调度类别\n"
#~ "  -p, --pid=PID         查看或修改已运行的进程\n"
#~ "  -t, --ignore          忽略失败\n"
#~ "  -V, --version         输出版本信息并退出\n"
#~ "  -h, --help            显示此帮助并退出\n"
#~ "\n"

#~ msgid " %s [options] <tty> [...]\n"
#~ msgstr " %s [选项] <tty> [...]\n"

#~ msgid " -s, --set-threshold <num>          set interruption threshold value\n"
#~ msgstr " -s, --set-threshold <数字>         设置中断阈值\n"

#~ msgid " -S, --set-default-threshold <num>  set default threshold value\n"
#~ msgstr " -S, --set-default-threshold <数字> 设置默认阈值\n"

#~ msgid " -t, --set-flush <num>              set flush timeout to value\n"
#~ msgstr " -t, --set-flush <数字>             设置冲刷(flush)超时值\n"

#~ msgid " -T, --set-default-flush <num>      set the default flush timeout to value\n"
#~ msgstr " -T, --set-default-flush <数字>     设置默认冲刷超时\n"

#~ msgid " -i, --interval <seconds>           gather statistics every <seconds> interval\n"
#~ msgstr " -i, --interval <秒数>              每隔这些 <秒数> 收集一次统计\n"

#~ msgid ""
#~ "File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
#~ "and the maximum transfer rate in characters/second was %f"
#~ msgstr ""
#~ "文件 %s，对应阈值 %lu，fifo 中的最大字符数为 %d，\n"
#~ "最大传输速度(字节/秒)为 %f"

#~ msgid ""
#~ "File %s, For threshold value %lu and timeout value %lu, Maximum characters in fifo were %d,\n"
#~ "and the maximum transfer rate in characters/second was %f"
#~ msgstr ""
#~ "文件 %s，对应阈值 %lu 和超时 %lu，fifo 中的最大字符数为 %d，\n"
#~ "最大传输速度(字节/秒)为 %f"

#~ msgid "cannot issue CYGETMON on %s"
#~ msgstr "无法对 %s 实施 CYGETMON 命令"

#~ msgid "cannot get timeout for %s"
#~ msgstr "无法获取 %s 的超时"

#~ msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
#~ msgstr "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"

#~ msgid "   %f int/sec; %f rec, %f send (char/sec)\n"
#~ msgstr "   %f int/秒; %f rec, %f 发送 (char/秒)\n"

#~ msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
#~ msgstr "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"

#~ msgid "   %f int/sec; %f rec (char/sec)\n"
#~ msgstr "   %f int/秒; %f rec (char/秒)\n"

#~ msgid "Invalid interval value"
#~ msgstr "无效的间隔值"

#~ msgid "Invalid interval value: %d"
#~ msgstr "无效的间隔值：%d"

#~ msgid "Invalid set value"
#~ msgstr "无效的设置值"

#~ msgid "Invalid set value: %d"
#~ msgstr "无效的设置值：%d"

#~ msgid "Invalid default value"
#~ msgstr "无效的默认值"

#~ msgid "Invalid default value: %d"
#~ msgstr "无效的默认值：%d"

#~ msgid "Invalid set time value"
#~ msgstr "无效的设置时间值"

#~ msgid "Invalid set time value: %d"
#~ msgstr "无效的设置时间值：%d"

#~ msgid "Invalid default time value"
#~ msgstr "无效的默认时间值"

#~ msgid "Invalid default time value: %d"
#~ msgstr "无效的默认时间值：%d"

#~ msgid "cannot set %s to threshold %d"
#~ msgstr "无法将 %s 设置为阈值 %d"

#~ msgid "cannot set %s to time threshold %d"
#~ msgstr "无法将 %s 设置为时间阈值 %d"

#~ msgid "%s: %ld current threshold and %ld current timeout\n"
#~ msgstr "%s：%ld 的当前阈值和 %ld 的当前超时\n"

#~ msgid "%s: %ld default threshold and %ld default timeout\n"
#~ msgstr "%s：%ld 的默认阈值和 %ld 的默认超时\n"

#~ msgid ""
#~ " -n, --keep-size     don't modify the length of the file\n"
#~ " -p, --punch-hole    punch holes in the file\n"
#~ " -o, --offset <num>  offset of the allocation, in bytes\n"
#~ " -l, --length <num>  length of the allocation, in bytes\n"
#~ msgstr ""
#~ " -n, --keep-size     不修改文件长度\n"
#~ " -p, --punch-hole    在文件中留出空洞\n"
#~ " -o, --offset <数字>  分配的偏移(字节数)\n"
#~ " -l, --length <数字>  分配的长度(字节数)\n"

#~ msgid ""
#~ " -o, --offset <num>  offset in bytes to discard from\n"
#~ " -l, --length <num>  length of bytes to discard from the offset\n"
#~ " -m, --minimum <num> minimum extent length to discard\n"
#~ " -v, --verbose       print number of discarded bytes\n"
#~ msgstr ""
#~ " -o, --offset <数字>  要丢弃内容的起始偏移量\n"
#~ " -l, --length <数字>  从偏移量开始的丢弃长度\n"
#~ " -m, --minimum <数字> 要丢弃的最小范围长度\n"
#~ " -v, --verbose        打印丢弃字节的长度\n"

#~ msgid ""
#~ "Time elapsed since reference time has been %.6f seconds.\n"
#~ "Delaying further to reach the new time.\n"
#~ msgstr ""
#~ "时间从参考时刻起已流逝 %.6f 秒。\n"
#~ "将延迟更长时间来到达新时间。\n"

#~ msgid " -term <terminal_name>\n"
#~ msgstr " -term <终端名>\n"

#~ msgid " -reset\n"
#~ msgstr " -reset\n"

#~ msgid " -initialize\n"
#~ msgstr " -initialize\n"

#~ msgid " -cursor <on|off>\n"
#~ msgstr " -cursor <on|off>\n"

#~ msgid " -repeat <on|off>\n"
#~ msgstr " -repeat <on|off>\n"

#~ msgid " -appcursorkeys <on|off>\n"
#~ msgstr " -appcursorkeys <on|off>\n"

#~ msgid " -linewrap <on|off>\n"
#~ msgstr " -linewrap <on|off>\n"

#~ msgid " -default\n"
#~ msgstr " -default\n"

#~ msgid " -foreground <default|black|blue|cyan|green|magenta|red|white|yellow>\n"
#~ msgstr " -foreground <default|black|blue|cyan|green|magenta|red|white|yellow>\n"

#~ msgid " -background <default|black|blue|cyan|green|magenta|red|white|yellow>\n"
#~ msgstr " -background <default|black|blue|cyan|green|magenta|red|white|yellow>\n"

#~ msgid " -hbcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>\n"
#~ msgstr " -hbcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>\n"

#~ msgid " -inversescreen <on|off>\n"
#~ msgstr " -inversescreen <on|off>\n"

#~ msgid " -bold <on|off>\n"
#~ msgstr " -bold <on|off>\n"

#~ msgid " -blink <on|off>\n"
#~ msgstr " -blink <on|off>\n"

#~ msgid " -reverse <on|off>\n"
#~ msgstr " -reverse <on|off>\n"

#~ msgid " -underline <on|off>\n"
#~ msgstr " -underline <on|off>\n"

#~ msgid " -store\n"
#~ msgstr " -store\n"

#~ msgid " -clear <all|rest>\n"
#~ msgstr " -clear <all|rest>\n"

#~ msgid " -tabs <tab1 tab2 tab3 ...>      (tabn = 1-160)\n"
#~ msgstr " -tabs <tab1 tab2 tab3 ...>      (tabn = 1-160)\n"

#~ msgid " -clrtabs <tab1 tab2 tab3 ...>   (tabn = 1-160)\n"
#~ msgstr " -clrtabs <tab1 tab2 tab3 ...>   (tabn = 1-160)\n"

#~ msgid " -regtabs <1-160>\n"
#~ msgstr " -regtabs <1-160>\n"

#~ msgid " -blank <0-60|force|poke>\n"
#~ msgstr " -blank <0-60|force|poke>\n"

#~ msgid " -dump   <1-NR_CONSOLES>\n"
#~ msgstr " -dump   <1-NR_CONSOLES>\n"

#~ msgid " -append <1-NR_CONSOLES>\n"
#~ msgstr " -append <1-NR_CONSOLES>\n"

#~ msgid " -msg <on|off>\n"
#~ msgstr " -msg <on|off>\n"

#~ msgid " -msglevel <0-8>\n"
#~ msgstr " -msglevel <0-8>\n"

#~ msgid " -powerdown <0-60>\n"
#~ msgstr " -powerdown <0-60>\n"

#~ msgid " -blength <0-2000>\n"
#~ msgstr " -blength <0-2000>\n"

#~ msgid " -bfreq freqnumber\n"
#~ msgstr " -bfreq freqnumber\n"

#~ msgid "Error writing screendump"
#~ msgstr "写屏幕转储失败"

#~ msgid "Couldn't read neither /dev/vcsa0 nor /dev/vcsa"
#~ msgstr "无法读 /dev/vcsa0 或 /dev/vcsa"

#~ msgid ""
#~ "Usage: %s [options] file...\n"
#~ "\n"
#~ msgstr ""
#~ "用法：%s [选项] 文件...\n"
#~ "\n"

#~ msgid ""
#~ "Options:\n"
#~ "  -d        display help instead of ring bell\n"
#~ "  -f        count logical, rather than screen lines\n"
#~ "  -l        suppress pause after form feed\n"
#~ "  -p        do not scroll, clean screen and display text\n"
#~ "  -c        do not scroll, display text and clean line ends\n"
#~ "  -u        suppress underlining\n"
#~ "  -s        squeeze multiple blank lines into one\n"
#~ "  -NUM      specify the number of lines per screenful\n"
#~ "  +NUM      display file beginning from line number NUM\n"
#~ "  +/STRING  display file beginning from search string match\n"
#~ "  -V        output version information and exit\n"
#~ msgstr ""
#~ "选项：\n"
#~ "  -d        显示帮助，而不是响铃\n"
#~ "  -f        统计逻辑行数而不是屏幕行数\n"
#~ "  -l        抑制换页(form feed)后的暂停\n"
#~ "  -p        不滚屏，清屏并显示文本\n"
#~ "  -c        不滚屏，显示文本并清理行尾\n"
#~ "  -u        抑制下划线\n"
#~ "  -s        将多个空行压缩为一行\n"
#~ "  -NUM      指定每屏显示的行数为 NUM\n"
#~ "  +NUM      从文件第 NUM 行开始显示\n"
#~ "  +/STRING  从匹配搜索字符串 STRING 的文件位置开始显示\n"
#~ "  -V        输出版本信息并退出\n"

#~ msgid "line too long"
#~ msgstr "行过长"

#~ msgid "set blocksize"
#~ msgstr "设置块大小"

#~ msgid "one bad block\n"
#~ msgstr "一个坏块\n"

#~ msgid "partition type hex or uuid"
#~ msgstr "分区类型 十六进制 或 uuid"

#~ msgid " %s [options] device\n"
#~ msgstr " %s [选项] 设备\n"

#~ msgid "read failed %s"
#~ msgstr "读失败：%s"

#~ msgid "seek failed %s"
#~ msgstr "定位失败：%s"

#~ msgid "seek failed: %d"
#~ msgstr "定位失败：%d"

#~ msgid "Detected %d error(s)."
#~ msgstr "检测到 %d 个错误。"

#~ msgid "No partitions defined"
#~ msgstr "未定义分区"

#~ msgid ""
#~ " -a, --all                     list all used devices\n"
#~ " -d, --detach <loopdev> [...]  detach one or more devices\n"
#~ " -D, --detach-all              detach all used devices\n"
#~ " -f, --find                    find first unused device\n"
#~ " -c, --set-capacity <loopdev>  resize device\n"
#~ " -j, --associated <file>       list all devices associated with <file>\n"
#~ msgstr ""
#~ " -a, --all                     列出所有使用的设备\n"
#~ " -d, --detach <回环设备> [...] 断开一个或多个设备\n"
#~ " -D, --detach-all              断开所有使用的设备\n"
#~ " -f, --find                    查找第一个未使用的设备\n"
#~ " -c, --set-capacity <回环设备> 调整设备大小\n"
#~ " -j, --associated <文件>       列出所有与 <文件> 关联的设备\n"

#~ msgid "%s: failed to set up loop device, offset is not 512-byte aligned."
#~ msgstr "%s：设置回环设备失败，偏移没有对齐 512 字节。"

#~ msgid "unssuported --local-line mode argument"
#~ msgstr "不支持的 --local-line 模式参数"

#~ msgid "usage:\n"
#~ msgstr "用法:\n"

#~ msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
#~ msgstr "\t注：elvtune 只能与 2.4 内核配合使用\n"

#~ msgid "missing blockdevice, use -h for help\n"
#~ msgstr "缺少块设备，请使用 -h 获取帮助\n"

#~ msgid ""
#~ "\n"
#~ "elvtune is only useful on older kernels;\n"
#~ "for 2.6 use IO scheduler sysfs tunables instead..\n"
#~ msgstr ""
#~ "\n"
#~ "elvtune 只用在旧内核上；\n"
#~ "对于 2.6 内核，请转用 IO 调度器 sysfs tunables..\n"

#~ msgid "edition number argument failed"
#~ msgstr "修订版本号 参数失败"

#~ msgid "fsync failed"
#~ msgstr "fsync 失败"

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ "Print version:\n"
#~ "        %s -v\n"
#~ "Print partition table:\n"
#~ "        %s -P {r|s|t} [options] device\n"
#~ "Interactive use:\n"
#~ "        %s [options] device\n"
#~ "\n"
#~ "Options:\n"
#~ "-a: Use arrow instead of highlighting;\n"
#~ "-z: Start with a zero partition table, instead of reading the pt from disk;\n"
#~ "-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
#~ "                the number of heads and the number of sectors/track.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "用法：\n"
#~ "打印版本：\n"
#~ "        %s -v\n"
#~ "打印分区表：\n"
#~ "        %s -P {r|s|t} [选项] 设备\n"
#~ "交互式使用：\n"
#~ "        %s [选项] 设备\n"
#~ "\n"
#~ "选项：\n"
#~ "-a：使用箭头代替高亮；\n"
#~ "-z：以空分区表启动，而非从磁盘读取分区表；\n"
#~ "-c C -h H -s S：覆盖内核检测到的柱面数、磁头数\n"
#~ "                和扇区/磁道数。\n"
#~ "\n"

#~ msgid "Writing disklabel to %s.\n"
#~ msgstr "正在将磁盘标签写入 %s。\n"

#~ msgid "Last %s or +size or +sizeM or +sizeK"
#~ msgstr "终止 %s 或 +size 或 +sizeM 或 +sizeK"

#~ msgid "Reading disklabel of %s at sector %d.\n"
#~ msgstr "从扇区 %2$d 位置读取 %1$s 的标签。\n"

#~ msgid "BSD disklabel command (m for help): "
#~ msgstr "BSD 磁盘标签命令(输入 m 获取帮助)："

#~ msgid "drivedata: "
#~ msgstr "驱动数据："

#~ msgid "#       start       end      size     fstype   [fsize bsize   cpg]\n"
#~ msgstr "#       起点        终点     大小     文件系统 [fsize bsize   cpg]\n"

#~ msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
#~ msgstr "必须 <= 扇区/磁道 * 磁道/柱面 (默认)。\n"

#~ msgid "Partition (a-%c): "
#~ msgstr "分区 (a-%c)："

#~ msgid ""
#~ "\n"
#~ "Syncing disks.\n"
#~ msgstr ""
#~ "\n"
#~ "正在同步磁盘\n"

#~ msgid ""
#~ "Usage:\n"
#~ " %1$s [options] <disk>    change partition table\n"
#~ " %1$s [options] -l <disk> list partition table(s)\n"
#~ " %1$s -s <partition>      give partition size(s) in blocks\n"
#~ "\n"
#~ "Options:\n"
#~ " -b <size>             sector size (512, 1024, 2048 or 4096)\n"
#~ " -c[=<mode>]           compatible mode: 'dos' or 'nondos' (default)\n"
#~ " -h                    print this help text\n"
#~ " -u[=<unit>]           display units: 'cylinders' or 'sectors' (default)\n"
#~ " -v                    print program version\n"
#~ " -C <number>           specify the number of cylinders\n"
#~ " -H <number>           specify the number of heads\n"
#~ " -S <number>           specify the number of sectors per track\n"
#~ "\n"
#~ msgstr ""
#~ "用法：\n"
#~ " %1$s [选项] <磁盘>    更改分区表\n"
#~ " %1$s [选项] -l <磁盘> 列出分区表\n"
#~ " %1$s -s <分区>        给出分区大小(块数)\n"
#~ "\n"
#~ "选项：\n"
#~ " -b <大小>             扇区大小(512、1024、2048或4096)\n"
#~ " -c[=<模式>]           兼容模式：“dos”或“nondos”(默认)\n"
#~ " -h                    打印此帮助文本\n"
#~ " -u[=<单位>]           显示单位：“cylinders”(柱面)或“sectors”(扇区，默认)\n"
#~ " -v                    打印程序版本\n"
#~ " -C <数字>             指定柱面数\n"
#~ " -H <数字>             指定磁头数\n"
#~ " -S <数字>             指定每个磁道的扇区数\n"
#~ "\n"

#~ msgid "unable to seek on %s"
#~ msgstr "无法在 %s 上定位"

#~ msgid "unable to write %s"
#~ msgstr "不能写 %s"

#~ msgid "fatal error"
#~ msgstr "致命错误"

#~ msgid "Command action"
#~ msgstr "命令操作"

#~ msgid "You must set"
#~ msgstr "您必须设置"

#~ msgid "heads"
#~ msgstr "磁头"

#~ msgid " and "
#~ msgstr " 和 "

#~ msgid "Unsupported suffix: '%s'.\n"
#~ msgstr "不支持的后缀：“%s”。\n"

#~ msgid ""
#~ "Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
#~ "            2^N: K  (KibiByte), M  (MebiByte), G  (GibiByte)\n"
#~ msgstr ""
#~ "支持：10^N: KB (千字节), MB (兆字节), GB (吉字节)\n"
#~ "            2^N: K  (约千字节), M  (约兆字节), G  (约吉字节)\n"

#~ msgid "Using default value %u\n"
#~ msgstr "将使用默认值 %u\n"

#~ msgid ""
#~ "\n"
#~ "Disk %s: %ld MB, %lld bytes"
#~ msgstr ""
#~ "\n"
#~ "磁盘 %s：%ld MB, %lld 字节"

#~ msgid ""
#~ "\n"
#~ "Disk %s: %ld.%ld GB, %llu bytes"
#~ msgstr ""
#~ "\n"
#~ "磁盘 %s：%ld.%ld GB, %llu 字节"

#~ msgid "cannot write disk label"
#~ msgstr "无法写磁盘标签"

#~ msgid ""
#~ "\n"
#~ "Error closing file\n"
#~ msgstr ""
#~ "\n"
#~ "关闭文件出错\n"

#~ msgid "Warning: setting sector offset for DOS compatibility\n"
#~ msgstr "警告：会设置扇区偏移量以与 DOS 兼容\n"

#~ msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
#~ msgstr "在 %s 上检测到 OSF/1 磁盘标签，将进入磁盘标签模式。\n"

#~ msgid ""
#~ "\n"
#~ "WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
#~ "         switch off the mode (with command 'c')."
#~ msgstr ""
#~ "\n"
#~ "警告：DOS 兼容模式已废弃。强烈建议您关闭该模式(用“c”命令)。"

#~ msgid ""
#~ "\n"
#~ "WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
#~ "         change units to sectors.\n"
#~ msgstr ""
#~ "\n"
#~ "警告：以柱面作为显示单位已废弃。请使用“u”命令来将单位改为扇区。\n"

#~ msgid "New disk identifier (current 0x%08x): "
#~ msgstr "新磁盘标识符(当前为 0x%08x)："

#~ msgid "No free sectors available\n"
#~ msgstr "没有空闲扇区可用\n"

#~ msgid "     phys=(%d, %d, %d) "
#~ msgstr "     物理=(%d, %d, %d) "

#~ msgid "logical=(%d, %d, %d)\n"
#~ msgstr "逻辑=(%d, %d, %d)\n"

#~ msgid "Warning: bad start-of-data in partition %zd\n"
#~ msgstr "警告：分区 %zd 数据起点有误\n"

#~ msgid "Adding a primary partition\n"
#~ msgstr "添加主分区\n"

#~ msgid ""
#~ "\n"
#~ "WARNING: If you have created or modified any DOS 6.xpartitions, please see the fdisk manual page for additionalinformation.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "警告：如果您创建或修改了 DOS 6.x 分区，请查看 fdisk 手册页面了解其他信息。\n"
#~ "\n"

#~ msgid "%*s Boot      Start         End      Blocks   Id  System\n"
#~ msgstr "%*s 启动      起点          终点     块数   Id  系统\n"

#~ msgid "Nr AF  Hd Sec  Cyl  Hd Sec  Cyl     Start      Size ID\n"
#~ msgstr ""
#~ "序 启  磁 扇区 柱面 磁 扇区 柱面    起始       大小 ID\n"
#~ "号 动  头           头\n"

#~ msgid ""
#~ "\n"
#~ "\tThere is a valid Mac label on this disk.\n"
#~ "\tUnfortunately fdisk(1) cannot handle these disks.\n"
#~ "\tUse either pdisk or parted to modify the partition table.\n"
#~ "\tNevertheless some advice:\n"
#~ "\t1. fdisk will destroy its contents on write.\n"
#~ "\t2. Be sure that this disk is NOT a still vital\n"
#~ "\t   part of a volume group. (Otherwise you may\n"
#~ "\t   erase the other disks as well, if unmirrored.)\n"
#~ msgstr ""
#~ "\n"
#~ "\t该磁盘上有一个有效的 Mac 标签。\n"
#~ "\t很不幸，fdisk(1) 无法操作这类磁盘。\n"
#~ "\t请使用 pdisk 或 parted 来修改该分区表。\n"
#~ "\t仍然提醒您：\n"
#~ "\t1. fdisk 在写入时会破坏磁盘上的内容。\n"
#~ "\t2. 请确保该磁盘当前“不是”某个卷组(volume group)\n"
#~ "\t   的关键部分(否则您可能同时擦除组里的其他磁盘，\n"
#~ "\t   如果没有镜像备份的话。)\n"

#~ msgid ""
#~ "\tSorry - this fdisk cannot handle Mac disk labels.\n"
#~ "\tIf you want to add DOS-type partitions, create\n"
#~ "\ta new empty DOS partition table first. (Use o.)\n"
#~ "\tWARNING: This will destroy the present disk contents.\n"
#~ msgstr ""
#~ "\t抱歉，该版本的 fdisk 无法操作 Mac 磁盘标签。\n"
#~ "\t如果您想添加 DOS 类型的分区，请先创建一个空的\n"
#~ "\tDOS 分区表(使用 o 选项。)\n"
#~ "\t警告：此操作会破坏当前磁盘内容。\n"

#~ msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n"
#~ msgstr "根据 MIPS 计算机系统规定，增加标签长度后不能超过 512 个字节\n"

#~ msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
#~ msgstr "ID=%02x\t起始=%d\t长度=%d\n"

#~ msgid ""
#~ "Done\n"
#~ "\n"
#~ msgstr ""
#~ "完成\n"
#~ "\n"

#~ msgid "Created partition %zd\n"
#~ msgstr "已创建分区 %zd\n"

#~ msgid " %s [options] [-] [USER [arg]...]\n"
#~ msgstr " %s [选项] [-] [USER [参数]...]\n"

#~ msgid ""
#~ " -1, --one        show only current month (default)\n"
#~ " -3, --three      show previous, current and next month\n"
#~ " -s, --sunday     Sunday as first day of week\n"
#~ " -m, --monday     Monday as first day of week\n"
#~ " -j, --julian     output Julian dates\n"
#~ " -y, --year       show whole current year\n"
#~ " -V, --version    display version information and exit\n"
#~ " -h, --help       display this help text and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -1, --one        只显示当前月份(默认)\n"
#~ " -3, --three      显示上个月、当月和下个月\n"
#~ " -s, --sunday     周日作为一周第一天\n"
#~ " -m, --monday     周一用为一周第一天\n"
#~ " -j, --julian     输出儒略日\n"
#~ " -y, --year       输出整年\n"
#~ " -V, --version    显示版本信息并退出\n"
#~ " -h, --help       显示此帮助并退出\n"
#~ "\n"

#~ msgid ""
#~ " -d, --udp             use UDP only\n"
#~ " -i, --id              log the process ID too\n"
#~ " -f, --file <file>     log the contents of this file\n"
#~ " -h, --help            display this help text and exit\n"
#~ msgstr ""
#~ " -d, --udp             只使用 UDP\n"
#~ " -i, --id              同时记录进程 ID\n"
#~ " -f, --file <文件>     记录此文件的内容\n"
#~ " -h, --help            显示此帮助并退出\n"

#~ msgid ""
#~ " -n, --server <name>   write to this remote syslog server\n"
#~ " -P, --port <number>   use this UDP port\n"
#~ " -p, --priority <prio> mark given message with this priority\n"
#~ " -s, --stderr          output message to standard error as well\n"
#~ msgstr ""
#~ " -n, --server <名称>   写入此远程 syslog 服务器\n"
#~ " -P, --port <数字>     使用此 UDP 端口\n"
#~ " -p, --priority <优先级> 用此优先级标记给定的消息\n"
#~ " -s, --stderr          也将消息输出到标准错误\n"

#~ msgid ""
#~ " -t, --tag <tag>       mark every line with this tag\n"
#~ " -u, --socket <socket> write to this Unix socket\n"
#~ " -V, --version         output version information and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -t, --tag <标志>      用此标志标记每一行\n"
#~ " -u, --socket <套接字> 写入此 Unix 套接字\n"
#~ " -V, --version         输出版本信息并退出\n"
#~ "\n"

#~ msgid "Failed to open/create %s: %m\n"
#~ msgstr "打开/创建 %s 失败：%m\n"

#~ msgid "Failed to lock %s: %m\n"
#~ msgstr "锁定 %s 失败：%m\n"

#~ msgid ""
#~ " -T, --ctime                 show human readable timestamp (could be \n"
#~ "                               inaccurate if you have used SUSPEND/RESUME)\n"
#~ msgstr ""
#~ " -T, --ctime                 显示易读的时间戳(如果您使用了\n"
#~ "                                SUSPEND/RESUME 则可能不准)\n"

#~ msgid "--notime can't be used together with --ctime or --reltime"
#~ msgstr "--notime 不能与--ctime 或 --reltime 同时使用"

#~ msgid "find unused loop device failed"
#~ msgstr "查找未使用回环设备失败"

#~ msgid ""
#~ " -v, --verbose      explain what is being done\n"
#~ " -V, --version      output version information and exit\n"
#~ " -h, --help         output help screen and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -v, --verbose      解释正在进行的操作\n"
#~ " -V, --version      输出版本信息并退出\n"
#~ " -h, --help         输出帮助屏幕并退出\n"
#~ "\n"

#~ msgid ""
#~ " -n, --nobanner          do not print banner, works only for root\n"
#~ " -t, --timeout <timeout> write timeout in seconds\n"
#~ " -V, --version           output version information and exit\n"
#~ " -h, --help              display this help and exit\n"
#~ "\n"
#~ msgstr ""
#~ " -n, --nobanner          不打印标语(banner)，只对 root 有效\n"
#~ " -t, --timeout <超时>    写超时(秒数)\n"
#~ " -V, --version           输出版本信息并退出\n"
#~ " -h, --help              显示此帮助并退出\n"
#~ "\n"

#~ msgid " -o, --output-separator <string>\n"
#~ msgstr " -o, --output-separator <字符串>\n"

#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [options] file...\n"
#~ msgstr ""
#~ "\n"
#~ "用法：\n"
#~ " %s [选项] 文件 ...\n"

#~ msgid ""
#~ "\n"
#~ "Options:\n"
#~ " -b              one-byte octal display\n"
#~ " -c              one-byte character display\n"
#~ " -C              canonical hex+ASCII display\n"
#~ " -d              two-byte decimal display\n"
#~ " -o              two-byte octal display\n"
#~ " -x              two-byte hexadecimal display\n"
#~ " -e format       format string to be used for displaying data\n"
#~ " -f format_file  file that contains format strings\n"
#~ " -n length       interpret only length bytes of input\n"
#~ " -s offset       skip offset bytes from the beginning\n"
#~ " -v              display without squeezing similar lines\n"
#~ " -V              output version information and exit\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "选项：\n"
#~ " -b              单字节八进制显示\n"
#~ " -c              单字节字符显示\n"
#~ " -C              规范化 十六进制+ASCII 显示\n"
#~ " -d              两字节十进制显示\n"
#~ " -o              两字节八进制显示\n"
#~ " -x              两字节十六进制显示\n"
#~ " -e 格式         用于显示数据的格式字符串\n"
#~ " -f 格式文件     包含格式字符串的文件\n"
#~ " -n 长度         只解释输入的指定长度个字节\n"
#~ " -s 偏移         跳过开头指定长度个字节\n"
#~ " -v              显示时不压缩相似的行\n"
#~ " -V              显示此帮助并退出\n"
#~ "\n"

#~ msgid "crypt failed: %m\n"
#~ msgstr "加密失败：%m\n"

#~ msgid "Can not fork: %m\n"
#~ msgstr "无法 fork：%m\n"

#~ msgid "bug in xstrndup call"
#~ msgstr "xstrndup 调用中有问题"