msgstr ""
"Project-Id-Version: util-linux 2.23.1\n"
"Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
-"POT-Creation-Date: 2013-09-27 12:21+0200\n"
+"POT-Creation-Date: 2023-04-19 09:50+0200\n"
"PO-Revision-Date: 2013-06-07 23:29+0800\n"
"Last-Translator: Wei-Lun Chao <bluebat@member.fsf.org>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-#: disk-utils/addpart.c:14
+#: disk-utils/addpart.c:15
#, fuzzy, c-format
msgid " %s <disk device> <partition number> <start> <length>\n"
msgstr " %s <disk device><分割區編號><開始><長度>\n"
-#: disk-utils/addpart.c:52 disk-utils/blockdev.c:275 disk-utils/blockdev.c:419
-#: disk-utils/blockdev.c:444 disk-utils/delpart.c:53 disk-utils/fdformat.c:62
-#: disk-utils/fdformat.c:154 disk-utils/fsck.c:1371
-#: disk-utils/fsck.cramfs.c:150 disk-utils/fsck.cramfs.c:511
-#: disk-utils/isosize.c:134 disk-utils/mkfs.bfs.c:187
-#: disk-utils/mkfs.cramfs.c:164 disk-utils/mkfs.cramfs.c:666
-#: disk-utils/mkfs.cramfs.c:791 disk-utils/mkfs.minix.c:757
-#: disk-utils/partx.c:931 disk-utils/resizepart.c:97
-#: disk-utils/swaplabel.c:105 fdisks/cfdisk.c:1827 fdisks/cfdisk.c:1949
-#: fdisks/cfdisk.c:2037 fdisks/fdisk.c:330 fdisks/fdisk.c:346
-#: fdisks/fdisk.c:380 fdisks/fdisk.c:521 lib/path.c:60 lib/path.c:72
-#: login-utils/islocal.c:87 login-utils/last.c:613
-#: login-utils/last-deprecated.c:245 login-utils/sulogin.c:399
-#: login-utils/sulogin.c:437 login-utils/utmpdump.c:125
-#: login-utils/utmpdump.c:344 login-utils/utmpdump.c:366
-#: login-utils/vipw.c:265 login-utils/vipw.c:283 misc-utils/findmnt.c:1019
-#: misc-utils/mcookie.c:145 misc-utils/mcookie.c:179 misc-utils/uuidd.c:221
-#: sys-utils/blkdiscard.c:135 sys-utils/cytune.c:178 sys-utils/cytune.c:404
-#: sys-utils/cytune.c:418 sys-utils/cytune.c:434 sys-utils/dmesg.c:515
-#: sys-utils/eject.c:510 sys-utils/eject.c:711 sys-utils/fallocate.c:153
-#: sys-utils/fsfreeze.c:124 sys-utils/fstrim.c:142 sys-utils/hwclock.c:265
-#: sys-utils/hwclock-cmos.c:632 sys-utils/hwclock-rtc.c:162
-#: sys-utils/hwclock-rtc.c:256 sys-utils/hwclock-rtc.c:414
-#: sys-utils/hwclock-rtc.c:435 sys-utils/hwclock-rtc.c:482
-#: sys-utils/ldattach.c:290 sys-utils/nsenter.c:112 sys-utils/rtcwake.c:106
-#: sys-utils/rtcwake.c:265 sys-utils/rtcwake.c:525 sys-utils/setpriv.c:224
-#: sys-utils/setpriv.c:521 sys-utils/setpriv.c:544 sys-utils/swapon.c:322
-#: sys-utils/swapon.c:488 sys-utils/switch_root.c:158 sys-utils/wdctl.c:310
-#: sys-utils/wdctl.c:365 term-utils/script.c:208 term-utils/script.c:233
-#: term-utils/script.c:568 term-utils/scriptreplay.c:197
-#: term-utils/scriptreplay.c:200 term-utils/wall.c:268 text-utils/rev.c:141
-#: text-utils/tailf.c:61 text-utils/tailf.c:98 text-utils/ul.c:232
+#: disk-utils/addpart.c:19
+msgid "Tell the kernel about the existence of a specified partition.\n"
+msgstr ""
+
+#: disk-utils/addpart.c:52 disk-utils/blockdev.c:251 disk-utils/delpart.c:52
+#: disk-utils/mkfs.bfs.c:134 disk-utils/resizepart.c:96 misc-utils/kill.c:323
+#: misc-utils/kill.c:384 misc-utils/rename.c:348 misc-utils/whereis.c:539
+#: sys-utils/flock.c:177 sys-utils/ipcrm.c:161 sys-utils/ldattach.c:368
+#: sys-utils/renice.c:175 sys-utils/switch_root.c:261 sys-utils/tunelp.c:152
+#: term-utils/agetty.c:910 term-utils/agetty.c:911 term-utils/agetty.c:919
+#: term-utils/agetty.c:920
+#, fuzzy
+msgid "not enough arguments"
+msgstr "不足引數"
+
+#. TRANSLATORS: '%s' refers to a file
+#: disk-utils/addpart.c:57 disk-utils/blockdev.c:300 disk-utils/blockdev.c:444
+#: disk-utils/blockdev.c:471 disk-utils/cfdisk.c:2820 disk-utils/delpart.c:58
+#: disk-utils/fdformat.c:229 disk-utils/fdisk.c:810 disk-utils/fdisk.c:1141
+#: disk-utils/fdisk-list.c:327 disk-utils/fdisk-list.c:368
+#: disk-utils/fdisk-list.c:391 disk-utils/fsck.c:1473
+#: disk-utils/fsck.cramfs.c:158 disk-utils/fsck.cramfs.c:542
+#: disk-utils/isosize.c:53 disk-utils/mkfs.bfs.c:202
+#: disk-utils/mkfs.cramfs.c:175 disk-utils/mkfs.cramfs.c:664
+#: disk-utils/mkfs.cramfs.c:812 disk-utils/mkfs.minix.c:838
+#: disk-utils/mkswap.c:347 disk-utils/mkswap.c:377 disk-utils/partx.c:1022
+#: disk-utils/resizepart.c:104 disk-utils/sfdisk.c:381 disk-utils/sfdisk.c:502
+#: disk-utils/sfdisk.c:814 disk-utils/sfdisk.c:1118 disk-utils/swaplabel.c:65
+#: libfdisk/src/bsd.c:642 login-utils/islocal.c:86 login-utils/last.c:683
+#: login-utils/sulogin.c:497 login-utils/sulogin.c:534
+#: login-utils/utmpdump.c:142 login-utils/utmpdump.c:367
+#: login-utils/utmpdump.c:391 login-utils/vipw.c:257 login-utils/vipw.c:275
+#: misc-utils/fadvise.c:148 misc-utils/findmnt.c:1227 misc-utils/logger.c:1247
+#: misc-utils/mcookie.c:119 misc-utils/pipesz.c:162 misc-utils/uuidd.c:235
+#: sys-utils/blkdiscard.c:248 sys-utils/blkpr.c:164 sys-utils/blkzone.c:144
+#: sys-utils/dmesg.c:541 sys-utils/eject.c:501 sys-utils/eject.c:696
+#: sys-utils/fallocate.c:405 sys-utils/fsfreeze.c:116 sys-utils/fstrim.c:106
+#: sys-utils/hwclock.c:241 sys-utils/hwclock.c:912 sys-utils/hwclock-rtc.c:108
+#: sys-utils/hwclock-rtc.c:353 sys-utils/hwclock-rtc.c:389
+#: sys-utils/hwclock-rtc.c:449 sys-utils/hwclock-rtc.c:502
+#: sys-utils/irq-common.c:263 sys-utils/ldattach.c:392
+#: sys-utils/lscpu-cputype.c:477 sys-utils/lsmem.c:671 sys-utils/nsenter.c:139
+#: sys-utils/rfkill.c:195 sys-utils/rtcwake.c:137 sys-utils/rtcwake.c:292
+#: sys-utils/setpriv.c:256 sys-utils/setpriv.c:622 sys-utils/setpriv.c:645
+#: sys-utils/swapon.c:382 sys-utils/swapon.c:525 sys-utils/switch_root.c:174
+#: sys-utils/unshare.c:115 sys-utils/unshare.c:130 sys-utils/wdctl.c:417
+#: sys-utils/zramctl.c:517 term-utils/agetty.c:3013 term-utils/mesg.c:154
+#: term-utils/script.c:386 term-utils/scriptlive.c:256
+#: term-utils/scriptlive.c:259 term-utils/scriptlive.c:262
+#: term-utils/scriptreplay.c:281 term-utils/scriptreplay.c:284
+#: term-utils/scriptreplay.c:287 term-utils/scriptreplay.c:290
+#: term-utils/wall.c:353 text-utils/colcrt.c:284 text-utils/more.c:459
+#: text-utils/rev.c:165 text-utils/ul.c:637
#, c-format
msgid "cannot open %s"
msgstr "無法開啟 %s"
-#: disk-utils/addpart.c:55 disk-utils/delpart.c:56 disk-utils/resizepart.c:94
+#: disk-utils/addpart.c:60 disk-utils/delpart.c:61 disk-utils/resizepart.c:101
#, fuzzy
msgid "invalid partition number argument"
msgstr "無效的分割區編號引數"
-#: disk-utils/addpart.c:56
+#: disk-utils/addpart.c:61
#, fuzzy
msgid "invalid start argument"
msgstr "無效的開始引數"
-#: disk-utils/addpart.c:57 disk-utils/resizepart.c:104
+#: disk-utils/addpart.c:62 disk-utils/resizepart.c:111 misc-utils/fadvise.c:115
#, fuzzy
msgid "invalid length argument"
msgstr "無效的長度引數"
-#: disk-utils/addpart.c:58
+#: disk-utils/addpart.c:63
#, fuzzy
msgid "failed to add partition"
msgstr "加入分割時失敗"
-#: disk-utils/blockdev.c:62
+#: disk-utils/blockdev.c:64
msgid "set read-only"
msgstr "設定唯讀"
-#: disk-utils/blockdev.c:69
+#: disk-utils/blockdev.c:71
msgid "set read-write"
msgstr "設定可讀寫"
-#: disk-utils/blockdev.c:75
+#: disk-utils/blockdev.c:77
msgid "get read-only"
msgstr "取得唯讀"
-#: disk-utils/blockdev.c:81
+#: disk-utils/blockdev.c:83
#, fuzzy
msgid "get discard zeroes support status"
msgstr "提取捨棄零支援狀態"
-#: disk-utils/blockdev.c:87
+#: disk-utils/blockdev.c:89
msgid "get logical block (sector) size"
msgstr "取得邏輯區塊 (磁區) 大小"
-#: disk-utils/blockdev.c:93
+#: disk-utils/blockdev.c:95
msgid "get physical block (sector) size"
msgstr "取得實際區塊 (磁區) 大小"
-#: disk-utils/blockdev.c:99
+#: disk-utils/blockdev.c:101
msgid "get minimum I/O size"
msgstr "取得最小 I/O 大小"
-#: disk-utils/blockdev.c:105
+#: disk-utils/blockdev.c:107
msgid "get optimal I/O size"
msgstr "取得最佳化 I/O 大小"
-#: disk-utils/blockdev.c:111
+#: disk-utils/blockdev.c:113
#, fuzzy
msgid "get alignment offset in bytes"
msgstr "提取對齊偏移在中位元組"
-#: disk-utils/blockdev.c:117
+#: disk-utils/blockdev.c:119
msgid "get max sectors per request"
msgstr "取得單一要求最大磁區"
-#: disk-utils/blockdev.c:123
+#: disk-utils/blockdev.c:125
msgid "get blocksize"
msgstr "取得區塊大小"
-#: disk-utils/blockdev.c:130
-msgid "set blocksize"
-msgstr "設定區塊大小"
+#: disk-utils/blockdev.c:132
+msgid "set blocksize on file descriptor opening the block device"
+msgstr ""
-#: disk-utils/blockdev.c:136
+#: disk-utils/blockdev.c:138
#, fuzzy
msgid "get 32-bit sector count (deprecated, use --getsz)"
msgstr "提取 32-bit 磁區計數 (不宜用，使用 --getsz)"
-#: disk-utils/blockdev.c:142
+#: disk-utils/blockdev.c:144
msgid "get size in bytes"
msgstr "以位元組為單位取得大小"
-#: disk-utils/blockdev.c:149
+#: disk-utils/blockdev.c:151
msgid "set readahead"
msgstr "設定預先讀取"
-#: disk-utils/blockdev.c:155
+#: disk-utils/blockdev.c:157
msgid "get readahead"
msgstr "取得預先讀取"
-#: disk-utils/blockdev.c:162
+#: disk-utils/blockdev.c:164
msgid "set filesystem readahead"
msgstr "設定檔案系統預先讀取"
-#: disk-utils/blockdev.c:168
+#: disk-utils/blockdev.c:170
msgid "get filesystem readahead"
msgstr "取得檔案系統預先讀取"
-#: disk-utils/blockdev.c:172
+#: disk-utils/blockdev.c:176
+msgid "get disk sequence number"
+msgstr ""
+
+#: disk-utils/blockdev.c:180
msgid "flush buffers"
msgstr "清理緩衝區"
-#: disk-utils/blockdev.c:176
+#: disk-utils/blockdev.c:184
msgid "reread partition table"
msgstr "重新讀取分割表"
-#: disk-utils/blockdev.c:183
-#, fuzzy, c-format
+#: disk-utils/blockdev.c:194
+#, c-format
msgid ""
-"\n"
-"Usage:\n"
-" %1$s -V\n"
-" %1$s --report [devices]\n"
" %1$s [-v|-q] commands devices\n"
-"\n"
-"Available commands:\n"
+" %1$s --report [devices]\n"
+" %1$s -h|-V\n"
msgstr ""
-"\n"
-"用法：\n"
-" %1$s -V\n"
-" %1$s --report [裝置]\n"
-" %1$s [-v|-q] 命令裝置\n"
-"\n"
-"可用命令：\n"
-#: disk-utils/blockdev.c:189
+#: disk-utils/blockdev.c:200
+msgid "Call block device ioctls from the command line."
+msgstr ""
+
+#: disk-utils/blockdev.c:203
+#, fuzzy
+msgid " -q quiet mode"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: disk-utils/blockdev.c:204
+#, fuzzy
+msgid " -v verbose mode"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: disk-utils/blockdev.c:205
+msgid " --report print report for specified (or all) devices"
+msgstr ""
+
+#: disk-utils/blockdev.c:210
+#, fuzzy
+msgid "Available commands:"
+msgstr "可用欄位：\n"
+
+#: disk-utils/blockdev.c:211
#, fuzzy, c-format
msgid " %-25s get size in 512-byte sectors\n"
msgstr " %-25s 提取大小在中 512-byte 磁區\n"
-#: disk-utils/blockdev.c:310
+#: disk-utils/blockdev.c:293 disk-utils/fdformat.c:219
+#: disk-utils/fsck.minix.c:1336 disk-utils/isosize.c:155
+#: disk-utils/mkfs.bfs.c:191 disk-utils/mkfs.c:110 disk-utils/mkfs.minix.c:827
+#: disk-utils/swaplabel.c:180 misc-utils/wipefs.c:764
+#: sys-utils/blkdiscard.c:237 sys-utils/blkpr.c:303 sys-utils/blkzone.c:495
+#: sys-utils/tunelp.c:241 sys-utils/zramctl.c:716 sys-utils/zramctl.c:742
+#, fuzzy
+msgid "no device specified"
+msgstr "沒有迴圈裝置指定的"
+
+#: disk-utils/blockdev.c:335
#, fuzzy
msgid "could not get device size"
msgstr "無法提取裝置大小"
-#: disk-utils/blockdev.c:316
+#: disk-utils/blockdev.c:341
#, fuzzy, c-format
msgid "Unknown command: %s"
msgstr "不明命令：%s"
-#: disk-utils/blockdev.c:332
+#: disk-utils/blockdev.c:357
#, fuzzy, c-format
msgid "%s requires an argument"
msgstr "%s 需要一個引數"
-#: disk-utils/blockdev.c:369
+#: disk-utils/blockdev.c:361
+#, fuzzy
+msgid "failed to parse command argument"
+msgstr "剖析引數時失敗"
+
+#: disk-utils/blockdev.c:392 disk-utils/blockdev.c:504
+#, fuzzy, c-format
+msgid "ioctl error on %s"
+msgstr "ioctl 錯誤於 %s"
+
+#: disk-utils/blockdev.c:394
#, c-format
msgid "%s failed.\n"
msgstr "%s 失敗。\n"
-#: disk-utils/blockdev.c:376
+#: disk-utils/blockdev.c:401
#, c-format
msgid "%s succeeded.\n"
msgstr "%s 成功。\n"
-#: disk-utils/blockdev.c:460
-#, fuzzy, c-format
-msgid "ioctl error on %s"
-msgstr "ioctl 錯誤於 %s"
+#. TRANSLATORS: Start sector not available. Max. 15 letters.
+#: disk-utils/blockdev.c:488
+msgid "N/A"
+msgstr ""
-#: disk-utils/blockdev.c:468
-#, c-format
-msgid "RO RA SSZ BSZ StartSec Size Device\n"
+#: disk-utils/blockdev.c:512
+#, fuzzy, c-format
+#| msgid "RO RA SSZ BSZ StartSec Size Device\n"
+msgid "RO RA SSZ BSZ StartSec Size Device\n"
msgstr "RO RA SSZ BSZ 起始磁區 大小 裝置\n"
-#: disk-utils/delpart.c:14
-#, fuzzy, c-format
-msgid " %s <disk device> <partition number>\n"
-msgstr " %s <disk device><分割區編號>\n"
+#: disk-utils/cfdisk.c:198
+msgid "Bootable"
+msgstr "可開機"
-#: disk-utils/delpart.c:57
-#, fuzzy
-msgid "failed to remove partition"
-msgstr "移除分割時失敗"
+#: disk-utils/cfdisk.c:198
+msgid "Toggle bootable flag of the current partition"
+msgstr "切換目前分割區的屬性旗標"
-#: disk-utils/fdformat.c:28
-#, c-format
-msgid "Formatting ... "
-msgstr "格式化中…"
+#: disk-utils/cfdisk.c:199
+msgid "Delete"
+msgstr "刪除"
-#: disk-utils/fdformat.c:48 disk-utils/fdformat.c:88
-#, c-format
-msgid "done\n"
-msgstr "已完成\n"
+#: disk-utils/cfdisk.c:199
+msgid "Delete the current partition"
+msgstr "刪除目前的分割區"
-#: disk-utils/fdformat.c:59
-#, c-format
-msgid "Verifying ... "
-msgstr "驗證中…"
+#: disk-utils/cfdisk.c:200
+msgid "Resize"
+msgstr ""
-#: disk-utils/fdformat.c:71
-msgid "Read: "
-msgstr "讀取："
+#: disk-utils/cfdisk.c:200
+#, fuzzy
+msgid "Reduce or enlarge the current partition"
+msgstr "刪除目前的分割區"
-#: disk-utils/fdformat.c:73
-#, c-format
-msgid "Problem reading cylinder %d, expected %d, read %d\n"
-msgstr "問題發生在讀取第 %d 個磁柱時，預計資料為 %d，實際讀取資料為 %d\n"
+#: disk-utils/cfdisk.c:201
+msgid "New"
+msgstr "新增"
-#: disk-utils/fdformat.c:81
-#, c-format
-msgid ""
-"bad data in cyl %d\n"
-"Continuing ... "
-msgstr ""
-"第 %d 個磁柱有壞資料。\n"
-"繼續進行..."
+#: disk-utils/cfdisk.c:201
+msgid "Create new partition from free space"
+msgstr "從剩餘空間新增一個新的分割區"
-#: disk-utils/fdformat.c:95
-#, fuzzy, c-format
-msgid "Usage: %s [options] device\n"
-msgstr "用法：%s [選項] 裝置\n"
+#: disk-utils/cfdisk.c:202
+msgid "Quit"
+msgstr "離開"
-#: disk-utils/fdformat.c:98
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -n, --no-verify disable the verification after the format\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -n, --no-verify 停用驗證之後格式\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#: disk-utils/cfdisk.c:202
+#, fuzzy
+msgid "Quit program without writing changes"
+msgstr "離開本程式且不寫入分割表"
-#: disk-utils/fdformat.c:145 disk-utils/fsck.cramfs.c:146
-#: disk-utils/mkfs.bfs.c:180 disk-utils/mkfs.cramfs.c:754
-#: disk-utils/mkfs.cramfs.c:788 disk-utils/mkfs.minix.c:750
-#: disk-utils/partx.c:870 misc-utils/namei.c:231 sys-utils/blkdiscard.c:138
-#: sys-utils/dmesg.c:517 sys-utils/fsfreeze.c:127 sys-utils/fstrim.c:136
-#: sys-utils/swapon.c:462 sys-utils/switch_root.c:88
-#: sys-utils/switch_root.c:128 term-utils/mesg.c:124 text-utils/tailf.c:101
-#: text-utils/tailf.c:279
-#, fuzzy, c-format
-msgid "stat failed %s"
-msgstr "stat 失敗 %s"
+#: disk-utils/cfdisk.c:203 libfdisk/src/bsd.c:439 libfdisk/src/bsd.c:1031
+#: libfdisk/src/dos.c:2809 libfdisk/src/gpt.c:3248 libfdisk/src/sgi.c:1165
+#: libfdisk/src/sun.c:1136
+msgid "Type"
+msgstr "類型"
-#: disk-utils/fdformat.c:148 disk-utils/partx.c:928 misc-utils/lsblk.c:1255
-#: sys-utils/blkdiscard.c:140 sys-utils/mountpoint.c:108
-#, fuzzy, c-format
-msgid "%s: not a block device"
-msgstr "%s：不是區塊裝置"
+#: disk-utils/cfdisk.c:203
+#, fuzzy
+msgid "Change the partition type"
+msgstr "列印分割表"
-#: disk-utils/fdformat.c:150
-#, fuzzy, c-format
-msgid "cannot access file %s"
-msgstr "無法存取檔案 %s"
+#: disk-utils/cfdisk.c:204
+msgid "Help"
+msgstr "求助"
-#: disk-utils/fdformat.c:156
-msgid "Could not determine current format type"
-msgstr "無法決定目前的格式類型"
+#: disk-utils/cfdisk.c:204
+msgid "Print help screen"
+msgstr "顯示說明畫面"
-#: disk-utils/fdformat.c:158
-#, c-format
-msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
-msgstr "%s面、%d 磁軌、%d 磁區/磁軌。總容量 %d kB。\n"
+#: disk-utils/cfdisk.c:205
+msgid "Sort"
+msgstr ""
-#: disk-utils/fdformat.c:159
-msgid "Double"
-msgstr "雙"
+#: disk-utils/cfdisk.c:205
+#, fuzzy
+msgid "Fix partitions order"
+msgstr "修正分割排序"
-#: disk-utils/fdformat.c:159
-msgid "Single"
-msgstr "單"
+#: disk-utils/cfdisk.c:206
+msgid "Write"
+msgstr "寫入"
+
+#: disk-utils/cfdisk.c:206
+msgid "Write partition table to disk (this might destroy data)"
+msgstr "寫入分割表至硬碟中 (可能使該分割區中的資料消失!)"
-#: disk-utils/fdformat.c:163 disk-utils/fsck.minix.c:1389
-#: disk-utils/mkfs.minix.c:808 disk-utils/mkswap.c:664 disk-utils/partx.c:983
-#: disk-utils/resizepart.c:108 fdisks/sfdisk.c:2983 fdisks/sfdisk.c:3035
-#: fdisks/sfdisk.c:3072 login-utils/utmpdump.c:384 sys-utils/dmesg.c:643
-#: sys-utils/wdctl.c:335 sys-utils/wdctl.c:399 term-utils/script.c:306
-#: term-utils/script.c:398 text-utils/pg.c:1236
+#: disk-utils/cfdisk.c:207
+msgid "Dump"
+msgstr ""
+
+#: disk-utils/cfdisk.c:207
#, fuzzy
-msgid "write failed"
-msgstr "寫å\85¥å¤±æ\95\97"
+msgid "Dump partition table to sfdisk compatible script file"
+msgstr "å\8d°å\87ºå\88\86å\89²è¡¨è\87³è\9e¢å¹\95æ\88\96æª\94æ¡\88"
-#: disk-utils/fsck.c:191
-#, fuzzy, c-format
-msgid "%s is mounted\n"
-msgstr "%s 被掛載\n"
+#: disk-utils/cfdisk.c:652 disk-utils/fdisk.c:465
+#, c-format
+msgid "internal error: unsupported dialog type %d"
+msgstr ""
-#: disk-utils/fsck.c:193
+#: disk-utils/cfdisk.c:1318
#, fuzzy, c-format
-msgid "%s is not mounted\n"
-msgstr "%s 未被掛載\n"
+msgid "%s (mounted)"
+msgstr "%s：無法掛載"
-#: disk-utils/fsck.c:307 lib/path.c:100 lib/path.c:121 lib/path.c:142
-#: lib/path.c:190
-#, c-format
-msgid "failed to read: %s"
-msgstr "讀取時失敗：%s"
+#: disk-utils/cfdisk.c:1366
+#, fuzzy
+msgid "Partition name:"
+msgstr "分割名稱"
-#: disk-utils/fsck.c:309 lib/path.c:123 lib/path.c:144
-#, c-format
-msgid "parse error: %s"
-msgstr "å\89\96æ\9e\90é\8c¯èª¤ï¼\9a%s"
+#: disk-utils/cfdisk.c:1373
+#, fuzzy
+msgid "Partition UUID:"
+msgstr "å\88\86å\89² UUID"
-#: disk-utils/fsck.c:329
-#, fuzzy, c-format
-msgid "Locking disk %s ... "
-msgstr "鎖定磁碟 %s…"
+#: disk-utils/cfdisk.c:1392
+#, fuzzy
+msgid "Partition type:"
+msgstr "分割區編號"
-#: disk-utils/fsck.c:339
-#, fuzzy, c-format
-msgid "(waiting) "
-msgstr "(等待) "
+#: disk-utils/cfdisk.c:1399
+msgid "Attributes:"
+msgstr ""
-#. TRANSLATORS: These are followups to "Locking disk...".
-#: disk-utils/fsck.c:349
+#: disk-utils/cfdisk.c:1423
#, fuzzy
-msgid "succeeded"
-msgstr "æ\88\90å\8a\9f"
+msgid "Filesystem UUID:"
+msgstr "æª\94æ¡\88系統 UUID"
-#: disk-utils/fsck.c:349
+#: disk-utils/cfdisk.c:1430
#, fuzzy
-msgid "failed"
-msgstr "失敗"
+msgid "Filesystem LABEL:"
+msgstr "檔案系統標貼"
-#: disk-utils/fsck.c:389
-#, fuzzy, c-format
-msgid "failed to setup description for %s"
-msgstr "設定描述用於 %s 時失敗"
+#: disk-utils/cfdisk.c:1436
+#, fuzzy
+msgid "Filesystem:"
+msgstr "郵件系統"
-#: disk-utils/fsck.c:415
-#, fuzzy, c-format
-msgid "%s: parse error at line %d -- ignore"
-msgstr "%s：剖析錯誤於列 %d -- 忽略"
+#: disk-utils/cfdisk.c:1441
+#, fuzzy
+msgid "Mountpoint:"
+msgstr "mountpoint"
-#: disk-utils/fsck.c:444 disk-utils/fsck.c:446
+#: disk-utils/cfdisk.c:1785
#, fuzzy, c-format
-msgid "%s: failed to parse fstab"
-msgstr "%s：無法剖析 fstab"
+msgid "Disk: %s"
+msgstr "磁碟：%.*s\n"
-#: disk-utils/fsck.c:587 sys-utils/umount.c:406 sys-utils/umount.c:429
+#: disk-utils/cfdisk.c:1787
#, fuzzy, c-format
-msgid "%s: not found"
-msgstr "%s：找不到"
+msgid "Size: %s, %<PRIu64> bytes, %ju sectors"
+msgstr ""
+"\n"
+"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: disk-utils/fsck.c:614 login-utils/login.c:1082 login-utils/sulogin.c:968
-#: login-utils/vipw.c:213 sys-utils/flock.c:292 sys-utils/nsenter.c:137
-#: sys-utils/swapon.c:279 sys-utils/unshare.c:136 term-utils/script.c:264
-#: term-utils/script.c:274
-msgid "fork failed"
-msgstr "衍生執行時失敗"
+#: disk-utils/cfdisk.c:1790
+#, fuzzy, c-format
+msgid "Label: %s, identifier: %s"
+msgstr "磁碟識別碼：0x%08x\n"
-#: disk-utils/fsck.c:621
+#: disk-utils/cfdisk.c:1793
#, fuzzy, c-format
-msgid "%s: execute failed"
-msgstr "%s：執行失敗"
+msgid "Label: %s"
+msgstr "標籤：%.*s\n"
-#: disk-utils/fsck.c:709
-#, fuzzy
-msgid "wait: no more child process?!?"
-msgstr "等待：已無更多子行程 ?!?"
+#: disk-utils/cfdisk.c:1944
+msgid "May be followed by M for MiB, G for GiB, T for TiB, or S for sectors."
+msgstr ""
-#: disk-utils/fsck.c:712
+#: disk-utils/cfdisk.c:1950
#, fuzzy
-msgid "waidpid failed"
-msgstr "waidpid 失敗"
+msgid "Please, specify size."
+msgstr "未指定任何檔名。"
-#: disk-utils/fsck.c:730
+#: disk-utils/cfdisk.c:1972
#, fuzzy, c-format
-msgid "Warning... %s for device %s exited with signal %d."
-msgstr "警告…%s 用於裝置 %s 離開的與信號 %d。"
+msgid "Minimum size is %<PRIu64> bytes."
+msgstr "以位元組為單位取得大小"
-#: disk-utils/fsck.c:736
+#: disk-utils/cfdisk.c:1981
#, fuzzy, c-format
-msgid "%s %s: status is %x, should never happen."
-msgstr "%s %s：狀態是 %x，應該永不發生。"
-
-#: disk-utils/fsck.c:782
-#, c-format
-msgid "Finished with %s (exit status %d)\n"
-msgstr "以 %s 完成 (離開狀態 %d)\n"
+msgid "Maximum size is %<PRIu64> bytes."
+msgstr "以位元組為單位取得大小"
-#: disk-utils/fsck.c:844
-#, fuzzy, c-format
-msgid "error %d while executing fsck.%s for %s"
-msgstr "%d 當執行 fsck 時發生錯誤.%s 用於 %s"
+#: disk-utils/cfdisk.c:1988
+#, fuzzy
+msgid "Failed to parse size."
+msgstr "剖析大小時失敗"
-#: disk-utils/fsck.c:913
+#: disk-utils/cfdisk.c:2046
#, fuzzy
-msgid ""
-"Either all or none of the filesystem types passed to -t must be prefixed\n"
-"with 'no' or '!'."
-msgstr ""
-"還是所有或沒有任何檔案系統類型傳遞到 -t 必須被前綴\n"
-"與『沒有』或『！』。"
+msgid "Select partition type"
+msgstr "已選分割區 %d\n"
-#: disk-utils/fsck.c:1030
-#, fuzzy, c-format
-msgid ""
-"%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
-msgstr "%s：跳過不當的列在中/etc/fstab：繫結掛載與非零值 fsck 傳送號碼"
+#: disk-utils/cfdisk.c:2096 disk-utils/cfdisk.c:2126
+#, fuzzy
+msgid "Enter script file name: "
+msgstr "無法寫入指令稿檔案"
-#: disk-utils/fsck.c:1042
-#, c-format
-msgid "%s: skipping nonexistent device\n"
-msgstr "%s：跳過不存在的裝置\n"
+#: disk-utils/cfdisk.c:2097
+#, fuzzy
+msgid "The script file will be applied to in-memory partition table."
+msgstr "您將不能寫入分割表。\n"
-#: disk-utils/fsck.c:1047
+#: disk-utils/cfdisk.c:2106 disk-utils/cfdisk.c:2148
+#: disk-utils/fdisk-menu.c:484 disk-utils/fdisk-menu.c:528
#, fuzzy, c-format
-msgid ""
-"%s: nonexistent device (\"nofail\" fstab option may be used to skip this "
-"device)\n"
-msgstr "%s：不存在的裝置 (「nofail」fstab 選項也許會被用來跳過這個裝置)\n"
+msgid "Cannot open %s"
+msgstr "無法開啟 %s\n"
-#: disk-utils/fsck.c:1064
+#: disk-utils/cfdisk.c:2108 disk-utils/fdisk-menu.c:486
#, fuzzy, c-format
-msgid "%s: skipping unknown filesystem type\n"
-msgstr "%s：跳過不明檔案系統型態\n"
+msgid "Failed to parse script file %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
-#: disk-utils/fsck.c:1083
+#: disk-utils/cfdisk.c:2110 disk-utils/fdisk-menu.c:488
#, fuzzy, c-format
-msgid "cannot check %s: fsck.%s not found"
-msgstr "無法檢查 %s：fsck.not 找到 %s "
+msgid "Failed to apply script %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
+
+#: disk-utils/cfdisk.c:2127
+msgid "The current in-memory partition table will be dumped to the file."
+msgstr ""
-#: disk-utils/fsck.c:1172
+#: disk-utils/cfdisk.c:2135 disk-utils/fdisk-menu.c:516
#, fuzzy
-msgid "failed to allocate iterator"
+msgid "Failed to allocate script handler"
msgstr "配置迭代器時失敗"
-#: disk-utils/fsck.c:1187
-msgid "Checking all file systems.\n"
-msgstr "檢查所有檔案系統。\n"
+#: disk-utils/cfdisk.c:2141
+#, fuzzy
+msgid "Failed to read disk layout into script."
+msgstr "加入輸出列時失敗"
-#: disk-utils/fsck.c:1278
-#, c-format
-msgid "--waiting-- (pass %d)\n"
-msgstr "--等待-- (通過 %d)\n"
+#: disk-utils/cfdisk.c:2155
+msgid "Disk layout successfully dumped."
+msgstr ""
-#: disk-utils/fsck.c:1303
+#: disk-utils/cfdisk.c:2158 disk-utils/fdisk-menu.c:534
#, fuzzy, c-format
-msgid " %s [options] -- [fs-options] [<filesystem> ...]\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %s [fsck-options] [fs-options] [filesys...]\n"
+msgid "Failed to write script %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
-#: disk-utils/fsck.c:1307
+#: disk-utils/cfdisk.c:2194
#, fuzzy
-msgid " -A check all filesystems\n"
-msgstr "檢查所有檔案系統。\n"
+msgid "Select label type"
+msgstr "不合法的類型\n"
-#: disk-utils/fsck.c:1308
-msgid " -C [<fd>] display progress bar; file descriptor is for GUIs\n"
-msgstr ""
+#: disk-utils/cfdisk.c:2197 disk-utils/fdisk.c:1162 disk-utils/fdisk-menu.c:492
+#, fuzzy
+msgid "Device does not contain a recognized partition table."
+msgstr "裝置不包含辨識的分割表\n"
-#: disk-utils/fsck.c:1309
-msgid " -l lock the device to guarantee exclusive access\n"
+#: disk-utils/cfdisk.c:2205
+msgid "Select a type to create a new label, press 'L' to load script file, 'Q' quits."
msgstr ""
-#: disk-utils/fsck.c:1310
+#: disk-utils/cfdisk.c:2254
#, fuzzy
-msgid " -M do not check mounted filesystems\n"
-msgstr " t 變更檔案系統的類型"
+msgid "This is cfdisk, a curses-based disk partitioning program."
+msgstr "本程式 cfdisk，是一個以游標操作為基礎的硬碟分割程式，"
-#: disk-utils/fsck.c:1311
-msgid " -N do not execute, just show what would be done\n"
-msgstr ""
+#: disk-utils/cfdisk.c:2255
+#, fuzzy
+msgid "It lets you create, delete, and modify partitions on a block device."
+msgstr "可供您新增、刪除和修改硬碟中的分割區"
-#: disk-utils/fsck.c:1312
-msgid " -P check filesystems in parallel, including root\n"
-msgstr ""
+#: disk-utils/cfdisk.c:2257
+msgid "Command Meaning"
+msgstr "按鍵命令 意義"
-#: disk-utils/fsck.c:1313
-msgid " -R skip root filesystem; useful only with '-A'\n"
-msgstr ""
+#: disk-utils/cfdisk.c:2258
+msgid "------- -------"
+msgstr "------- -------"
-#: disk-utils/fsck.c:1314
-#, fuzzy
-msgid " -r report statistics for each device checked\n"
-msgstr " -l [或 --list]： 列出每個裝置的分割區"
+#: disk-utils/cfdisk.c:2259
+msgid " b Toggle bootable flag of the current partition"
+msgstr " b 切換目前分割區的開機屬性旗標"
-#: disk-utils/fsck.c:1315
-#, fuzzy
-msgid " -s serialize the checking operations\n"
+#: disk-utils/cfdisk.c:2260
+msgid " d Delete the current partition"
msgstr " d 刪除目前的分割區"
-#: disk-utils/fsck.c:1316
+#: disk-utils/cfdisk.c:2261
+msgid " h Print this screen"
+msgstr " h 顯示本說明畫面"
+
+#: disk-utils/cfdisk.c:2262
+msgid " n Create new partition from free space"
+msgstr " n 由剩餘空間中新增一塊分割區"
+
+#: disk-utils/cfdisk.c:2263
+msgid " q Quit program without writing partition table"
+msgstr " q 離開本程式並且不寫入分割表"
+
+#: disk-utils/cfdisk.c:2264
#, fuzzy
-msgid " -T do not show the title on startup\n"
-msgstr " -f 不分割長列\n"
+msgid " r Reduce or enlarge the current partition"
+msgstr "刪除目前的分割區"
-#: disk-utils/fsck.c:1317
-msgid ""
-" -t <type> specify filesystem types to be checked;\n"
-" <type> is allowed to be a comma-separated list\n"
+#: disk-utils/cfdisk.c:2265
+msgid " s Fix partitions order (only when in disarray)"
msgstr ""
-#: disk-utils/fsck.c:1319
+#: disk-utils/cfdisk.c:2266
#, fuzzy
-msgid " -V explain what is being done\n"
-msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+msgid " t Change the partition type"
+msgstr " t 變更檔案系統的類型"
+
+#: disk-utils/cfdisk.c:2267
+msgid " u Dump disk layout to sfdisk compatible script file"
+msgstr ""
-#: disk-utils/fsck.c:1320
+#: disk-utils/cfdisk.c:2268
#, fuzzy
-msgid " -? display this help and exit\n"
-msgstr " -h 顯示這份說明然後離開\n"
+msgid " W Write partition table to disk (you must enter uppercase W);"
+msgstr " W 寫入分割表 (寫入一定要用大寫 W)"
-#: disk-utils/fsck.c:1323
-msgid "See the specific fsck.* commands for available fs-options."
-msgstr ""
+#: disk-utils/cfdisk.c:2269
+#, fuzzy
+msgid " since this might destroy data on the disk, you must either"
+msgstr " 因為這將會使您的硬碟中的資料消失，您必須"
-#: disk-utils/fsck.c:1361
+#: disk-utils/cfdisk.c:2270
#, fuzzy
-msgid "too many devices"
-msgstr "太多裝置"
+msgid " confirm or deny the write by entering 'yes' or 'no'"
+msgstr " 明確地回答 'yes' 代表寫入，若不要寫入請回答"
-#: disk-utils/fsck.c:1373
+#: disk-utils/cfdisk.c:2271
#, fuzzy
-msgid "Is /proc mounted?"
-msgstr "是/proc 掛載？"
+msgid " x Display/hide extra information about a partition"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: disk-utils/fsck.c:1381
-#, fuzzy, c-format
-msgid "must be root to scan for matching filesystems: %s"
-msgstr "必須是根到掃描用於匹配檔案系統：%s"
+#: disk-utils/cfdisk.c:2272
+msgid "Up Arrow Move cursor to the previous partition"
+msgstr "向上鍵 移動往上鍵可移至上一個分割區"
-#: disk-utils/fsck.c:1385
-#, fuzzy, c-format
-msgid "couldn't find matching filesystem: %s"
-msgstr "找不到匹配檔案系統：%s"
+#: disk-utils/cfdisk.c:2273
+msgid "Down Arrow Move cursor to the next partition"
+msgstr "向下鍵 移動往下鍵可移至下一個分割區"
-#: disk-utils/fsck.c:1393 disk-utils/fsck.c:1481 sys-utils/eject.c:292
+#: disk-utils/cfdisk.c:2274
#, fuzzy
-msgid "too many arguments"
-msgstr "太å¤\9aå¼\95æ\95¸"
+msgid "Left Arrow Move cursor to the previous menu item"
+msgstr "å\90\91ä¸\8aé\8dµ 移å\8b\95å¾\80ä¸\8aé\8dµå\8f¯ç§»è\87³ä¸\8aä¸\80å\80\8bå\88\86å\89²å\8d\80"
-#: disk-utils/fsck.c:1533
+#: disk-utils/cfdisk.c:2275
#, fuzzy
-msgid "the -l option can be used with one device only -- ignore"
-msgstr "-l 選項可以被使用與一個裝置只有 -- 忽略"
-
-#: disk-utils/fsck.cramfs.c:114 misc-utils/whereis.c:168
-#, fuzzy, c-format
-msgid " %s [options] file\n"
-msgstr " %s [選項] 檔案\n"
+msgid "Right Arrow Move cursor to the next menu item"
+msgstr "向下鍵 移動往下鍵可移至下一個分割區"
-#: disk-utils/fsck.cramfs.c:116
-msgid " -a for compatibility only, ignored\n"
-msgstr ""
+#: disk-utils/cfdisk.c:2277
+msgid "Note: All of the commands can be entered with either upper or lower"
+msgstr "注意: 以上所有的按鍵命令均不區分大小寫"
-#: disk-utils/fsck.cramfs.c:117
+#: disk-utils/cfdisk.c:2278
#, fuzzy
-msgid " -v, --verbose be more verbose\n"
-msgstr " -v, --verbose 是更多詳細的\n"
+msgid "case letters (except for Write)."
+msgstr "(除了 '寫入' 之外)。"
+
+#: disk-utils/cfdisk.c:2280
+msgid "Use lsblk(8) or partx(8) to see more details about the device."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:118
+#: disk-utils/cfdisk.c:2290 disk-utils/cfdisk.c:2593
#, fuzzy
-msgid " -x, --destination <dir> extract into directory\n"
-msgstr " -x, --destination <dir> 抽出進入目錄\n"
+msgid "Press a key to continue."
+msgstr "按任何鍵繼續"
-#: disk-utils/fsck.cramfs.c:119
-msgid " -y for compatibility only, ignored\n"
+#: disk-utils/cfdisk.c:2376
+msgid "Could not toggle the flag."
msgstr ""
-#: disk-utils/fsck.cramfs.c:156
-#, c-format
-msgid "ioctl failed: unable to determine device size: %s"
-msgstr "ioctl 失敗：無法決定裝置大小：%s"
+#: disk-utils/cfdisk.c:2386
+#, fuzzy, c-format
+msgid "Could not delete partition %zu."
+msgstr "已選分割區 %d\n"
-#: disk-utils/fsck.cramfs.c:162
-#, c-format
-msgid "not a block device or file: %s"
-msgstr "不是區塊裝置或檔案：%s"
+#: disk-utils/cfdisk.c:2388 disk-utils/fdisk-menu.c:661
+#, fuzzy, c-format
+msgid "Partition %zu has been deleted."
+msgstr "分割 %d 被刪除\n"
-#: disk-utils/fsck.cramfs.c:165 disk-utils/fsck.cramfs.c:200
-msgid "file length too short"
-msgstr "檔案長度太短"
+#: disk-utils/cfdisk.c:2409
+#, fuzzy
+msgid "Partition size: "
+msgstr "分割區 (a-%c)："
-#: disk-utils/fsck.cramfs.c:169 disk-utils/fsck.cramfs.c:176
-#: disk-utils/fsck.cramfs.c:233 disk-utils/fsck.cramfs.c:251
-#: login-utils/last.c:194 login-utils/last.c:231 sys-utils/setpriv.c:233
-#, c-format
-msgid "read failed: %s"
-msgstr "讀取失敗：%s"
+#: disk-utils/cfdisk.c:2450
+#, fuzzy, c-format
+msgid "Changed type of partition %zu."
+msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n"
-#: disk-utils/fsck.cramfs.c:174 disk-utils/fsck.cramfs.c:231
-#: disk-utils/fsck.cramfs.c:247 login-utils/last.c:189 login-utils/last.c:223
+#: disk-utils/cfdisk.c:2452
#, fuzzy, c-format
-msgid "seek failed: %s"
-msgstr "搜尋失敗"
+msgid "The type of partition %zu is unchanged."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: disk-utils/fsck.cramfs.c:180 disk-utils/fsck.cramfs.c:182
-msgid "superblock magic not found"
-msgstr "找不到超區塊的魔術標記"
+#: disk-utils/cfdisk.c:2473
+#, fuzzy
+msgid "New size: "
+msgstr "新命令殼"
-#: disk-utils/fsck.cramfs.c:185
+#: disk-utils/cfdisk.c:2488
#, fuzzy, c-format
-msgid "cramfs endianness is %s\n"
-msgstr "cramfs 尾序是 %s\n"
+msgid "Partition %zu resized."
+msgstr "%s：分割 #%d 移除\n"
-#: disk-utils/fsck.cramfs.c:186
+#: disk-utils/cfdisk.c:2506 disk-utils/fdisk.c:1138 disk-utils/fdisk-menu.c:595
+msgid "Device is open in read-only mode."
+msgstr ""
+
+#: disk-utils/cfdisk.c:2511
#, fuzzy
-msgid "big"
-msgstr "大"
+msgid "Are you sure you want to write the partition table to disk? "
+msgstr "您確定要將分割表寫入硬碟中嗎? (yes 或 no):"
+
+#: disk-utils/cfdisk.c:2513
+msgid "Type \"yes\" or \"no\", or press ESC to leave this dialog."
+msgstr ""
+
+#: disk-utils/cfdisk.c:2518 login-utils/lslogins.c:219 sys-utils/lscpu.c:339
+#: sys-utils/lsmem.c:266
+msgid "yes"
+msgstr "是"
-#: disk-utils/fsck.cramfs.c:186
+#: disk-utils/cfdisk.c:2519
#, fuzzy
-msgid "little"
-msgstr "小型"
+msgid "Did not write partition table to disk."
+msgstr "不要將分割表寫入硬碟"
-#: disk-utils/fsck.cramfs.c:190
-msgid "unsupported filesystem features"
-msgstr "不受支援的檔案系統特徵"
+#: disk-utils/cfdisk.c:2524
+#, fuzzy
+msgid "Failed to write disklabel."
+msgstr "%s：無法寫入標籤"
-#: disk-utils/fsck.cramfs.c:193
-#, c-format
-msgid "superblock size (%d) too small"
-msgstr "超區塊大小 (%d) 太小"
+#: disk-utils/cfdisk.c:2530 disk-utils/fdisk-menu.c:602
+#, fuzzy
+msgid "The partition table has been altered."
+msgstr ""
+"分割表已變更！\n"
+"\n"
-#: disk-utils/fsck.cramfs.c:198
-msgid "zero file count"
-msgstr "零個檔案計數"
+#: disk-utils/cfdisk.c:2553 disk-utils/cfdisk.c:2628
+#, fuzzy
+msgid "Note that partition table entries are not in disk order now."
+msgstr ""
+"\n"
+"分割表項目未按磁碟排序\n"
-#: disk-utils/fsck.cramfs.c:203
+#: disk-utils/cfdisk.c:2590
#, c-format
-msgid "warning: file extends past end of filesystem\n"
-msgstr "警告：檔案延伸超過檔案系統末端\n"
+msgid "Device already contains a %s signature; it will be removed by a write command."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:205
-#, c-format
-msgid "warning: old cramfs format\n"
-msgstr "警告：舊的 cramfs 格式\n"
+#: disk-utils/cfdisk.c:2602
+#, fuzzy
+msgid "failed to create a new disklabel"
+msgstr "建立新的清空 Sun disklabel"
-#: disk-utils/fsck.cramfs.c:217
-msgid "unable to test CRC: old cramfs format"
-msgstr "無法測試循環冗餘檢查：舊的 cramfs 格式"
+#: disk-utils/cfdisk.c:2611
+#, fuzzy
+msgid "failed to read partitions"
+msgstr "加入分割時失敗"
-#: disk-utils/fsck.cramfs.c:270
-msgid "crc error"
-msgstr "循環冗餘檢查錯誤"
+#: disk-utils/cfdisk.c:2624
+msgid "Device is open in read-only mode. Changes will remain in memory only."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:301 disk-utils/fsck.minix.c:551
-msgid "seek failed"
-msgstr "搜尋失敗"
+#: disk-utils/cfdisk.c:2626
+msgid "Device is currently in use, repartitioning is probably a bad idea."
+msgstr ""
-#: disk-utils/fsck.cramfs.c:305
-#, fuzzy
-msgid "read romfs failed"
-msgstr "fread 失敗"
+#: disk-utils/cfdisk.c:2712
+#, fuzzy, c-format
+msgid " %1$s [options] <disk>\n"
+msgstr " %s [選項] <device>\n"
-#: disk-utils/fsck.cramfs.c:337
-msgid "root inode is not directory"
-msgstr "根 inode 並非目錄"
+#: disk-utils/cfdisk.c:2715 disk-utils/fdisk.c:855 disk-utils/sfdisk.c:2044
+#, fuzzy
+msgid "Display or manipulate a disk partition table.\n"
+msgstr "%s：無法讀取分割表"
-#: disk-utils/fsck.cramfs.c:341
-#, c-format
-msgid "bad root offset (%lu)"
-msgstr "不當的根偏移 (%lu)"
+#: disk-utils/cfdisk.c:2719
+#, fuzzy, c-format
+msgid " -L, --color[=<when>] colorize output (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.cramfs.c:359
-msgid "data block too large"
-msgstr "資料區塊太大"
+#: disk-utils/cfdisk.c:2722
+#, fuzzy
+msgid " -z, --zero start with zeroed partition table\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.cramfs.c:363
+#: disk-utils/cfdisk.c:2724
#, fuzzy, c-format
-msgid "decompression error: %s"
-msgstr "解壓縮錯誤 %p(%d)：%s"
+msgid " --lock[=<mode>] use exclusive device lock (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.cramfs.c:389
-#, c-format
-msgid " hole at %ld (%zd)\n"
-msgstr " 漏洞位於 %ld (%zd)\n"
+#: disk-utils/cfdisk.c:2725
+#, fuzzy
+msgid " -r, --read-only forced open cfdisk in read-only mode\n"
+msgstr " -s --shared 提取共享的鎖定\n"
-#: disk-utils/fsck.cramfs.c:396 disk-utils/fsck.cramfs.c:551
-#, c-format
-msgid " uncompressing block at %ld to %ld (%ld)\n"
-msgstr " 解壓縮區塊位於 %ld 到 %ld (%ld)\n"
+#: disk-utils/cfdisk.c:2768 disk-utils/fdisk.c:1014 disk-utils/sfdisk.c:2350
+#: misc-utils/cal.c:421 sys-utils/dmesg.c:1499 text-utils/hexdump.c:121
+#, fuzzy
+msgid "unsupported color mode"
+msgstr "不受支援的命令"
-#: disk-utils/fsck.cramfs.c:403
-#, c-format
-msgid "non-block (%ld) bytes"
-msgstr "é\9d\9eå\8d\80å¡\8a (%ld) ä½\8då\85\83çµ\84"
+#: disk-utils/cfdisk.c:2798 disk-utils/fdisk.c:949 disk-utils/sfdisk.c:232
+#, fuzzy
+msgid "failed to allocate libfdisk context"
+msgstr "é\85\8dç½®è¿ä»£å\99¨æ\99\82失æ\95\97"
-#: disk-utils/fsck.cramfs.c:407
-#, c-format
-msgid "non-size (%ld vs %ld) bytes"
-msgstr "非大小 (%ld vs %ld) 位元組"
+#: disk-utils/delpart.c:15
+#, fuzzy, c-format
+msgid " %s <disk device> <partition number>\n"
+msgstr " %s <disk device><分割區編號>\n"
-#: disk-utils/fsck.cramfs.c:413 disk-utils/fsck.cramfs.c:517
-#: disk-utils/swaplabel.c:149 fdisks/cfdisk.c:1857 fdisks/cfdisk.c:1978
-#: fdisks/cfdisk.c:2076 fdisks/sfdisk.c:254 fdisks/sfdisk.c:262
-#: fdisks/sfdisk.c:324 sys-utils/fallocate.c:172 sys-utils/setpriv.c:527
-#: sys-utils/setpriv.c:531 sys-utils/setpriv.c:550 sys-utils/swapon.c:340
-#: term-utils/ttymsg.c:173
-#, c-format
-msgid "write failed: %s"
-msgstr "寫入失敗：%s"
+#: disk-utils/delpart.c:19
+msgid "Tell the kernel to forget about a specified partition.\n"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:425
-#, c-format
-msgid "lchown failed: %s"
-msgstr "lchown 失敗：%s"
+#: disk-utils/delpart.c:62
+#, fuzzy
+msgid "failed to remove partition"
+msgstr "移除分割時失敗"
-#: disk-utils/fsck.cramfs.c:429
+#: disk-utils/fdformat.c:54
#, c-format
-msgid "chown failed: %s"
-msgstr "chown 失敗：%s"
+msgid "Formatting ... "
+msgstr "格式化中…"
-#: disk-utils/fsck.cramfs.c:434
+#: disk-utils/fdformat.c:69 disk-utils/fdformat.c:139
#, c-format
-msgid "utime failed: %s"
-msgstr "utime 失敗：%s"
+msgid "done\n"
+msgstr "已完成\n"
-#: disk-utils/fsck.cramfs.c:446
+#: disk-utils/fdformat.c:81
#, c-format
-msgid "directory inode has zero offset and non-zero size: %s"
-msgstr "目錄 inode 有零偏移值和非零大小：%s"
+msgid "Verifying ... "
+msgstr "驗證中…"
-#: disk-utils/fsck.cramfs.c:461
-#, c-format
-msgid "mkdir failed: %s"
-msgstr "mkdir 失敗：%s"
+#: disk-utils/fdformat.c:109
+msgid "Read: "
+msgstr "讀取："
-#: disk-utils/fsck.cramfs.c:477
-msgid "filename length is zero"
-msgstr "檔名長度為零"
+#: disk-utils/fdformat.c:111
+#, fuzzy, c-format
+msgid "Problem reading track/head %u/%u, expected %d, read %d\n"
+msgstr "問題發生在讀取第 %d 個磁柱時，預計資料為 %d，實際讀取資料為 %d\n"
-#: disk-utils/fsck.cramfs.c:479
-msgid "bad filename length"
-msgstr "不當的檔名長度"
+#: disk-utils/fdformat.c:128
+#, fuzzy, c-format
+msgid ""
+"bad data in track/head %u/%u\n"
+"Continuing ... "
+msgstr ""
+"第 %d 個磁柱有壞資料。\n"
+"繼續進行..."
-#: disk-utils/fsck.cramfs.c:485
-msgid "bad inode offset"
-msgstr "不當的 inode 偏移值"
+#: disk-utils/fdformat.c:146 disk-utils/fsck.minix.c:183
+#: disk-utils/swaplabel.c:123 misc-utils/wipefs.c:633 sys-utils/blkdiscard.c:92
+#: sys-utils/blkpr.c:213 sys-utils/tunelp.c:95
+#, fuzzy, c-format
+msgid " %s [options] <device>\n"
+msgstr " %s [選項] <device>\n"
-#: disk-utils/fsck.cramfs.c:500
-msgid "file inode has zero offset and non-zero size"
-msgstr "檔案 inode 有零偏移值和非零大小"
+#: disk-utils/fdformat.c:150
+msgid "Do a low-level formatting of a floppy disk.\n"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:503
-msgid "file inode has zero size and non-zero offset"
-msgstr "檔案 inode 有零大小和非零偏移值"
+#: disk-utils/fdformat.c:153
+#, fuzzy
+msgid " -f, --from <N> start at the track N (default 0)\n"
+msgstr " -a, --all 所有 (預設)\n"
-#: disk-utils/fsck.cramfs.c:532
-msgid "symbolic link has zero offset"
-msgstr "符號連結有零偏移值"
+#: disk-utils/fdformat.c:154
+#, fuzzy
+msgid " -t, --to <N> stop at the track N\n"
+msgstr " -2, --twostopbits 設定停止位元到兩\n"
-#: disk-utils/fsck.cramfs.c:534
-msgid "symbolic link has zero size"
-msgstr "符號連結有零大小"
+#: disk-utils/fdformat.c:155
+msgid ""
+" -r, --repair <N> try to repair tracks failed during\n"
+" the verification (max N retries)\n"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:543
-#, c-format
-msgid "size error in symlink: %s"
-msgstr "大小錯誤發生於符號連結：%s"
+#: disk-utils/fdformat.c:157
+msgid " -n, --no-verify disable the verification after the format\n"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:557
-#, c-format
-msgid "symlink failed: %s"
-msgstr "符è\99\9fé\80£çµ\90失æ\95\97：%s"
+#: disk-utils/fdformat.c:195
+#, fuzzy
+msgid "invalid argument - from"
+msgstr "ç\84¡æ\95\88ç\9a\84å¼\95æ\95¸：%s"
-#: disk-utils/fsck.cramfs.c:570
-#, c-format
-msgid "special file has non-zero offset: %s"
-msgstr "ç\89¹æ®\8aæª\94æ¡\88æ\9c\89é\9d\9eé\9b¶å\81\8f移å\80¼：%s"
+#: disk-utils/fdformat.c:199
+#, fuzzy
+msgid "invalid argument - to"
+msgstr "ç\84¡æ\95\88ç\9a\84å¼\95æ\95¸：%s"
-#: disk-utils/fsck.cramfs.c:580
-#, c-format
-msgid "fifo has non-zero size: %s"
-msgstr "fifo 有非零大小：%s"
+#: disk-utils/fdformat.c:202
+#, fuzzy
+msgid "invalid argument - repair"
+msgstr "無效的引數：%s"
-#: disk-utils/fsck.cramfs.c:586
-#, c-format
-msgid "socket has non-zero size: %s"
-msgstr "通訊端有非零大小：%s"
+#: disk-utils/fdformat.c:223 disk-utils/fsck.cramfs.c:162
+#: disk-utils/mkfs.bfs.c:198 disk-utils/mkfs.cramfs.c:341
+#: disk-utils/mkfs.cramfs.c:763 disk-utils/mkfs.cramfs.c:809
+#: disk-utils/mkfs.minix.c:835 disk-utils/mkswap.c:374 disk-utils/partx.c:959
+#: login-utils/last.c:697 login-utils/utmpdump.c:145 misc-utils/namei.c:146
+#: misc-utils/rename.c:164 misc-utils/rename.c:229 sys-utils/blkdiscard.c:251
+#: sys-utils/blkzone.c:147 sys-utils/dmesg.c:543 sys-utils/fallocate.c:201
+#: sys-utils/fsfreeze.c:119 sys-utils/fstrim.c:78 sys-utils/nsenter.c:187
+#: sys-utils/swapon.c:530 sys-utils/switch_root.c:93
+#: sys-utils/switch_root.c:134 sys-utils/switch_root.c:139
+#: sys-utils/unshare.c:211 term-utils/mesg.c:144 term-utils/mesg.c:156
+#: text-utils/more.c:463
+#, fuzzy, c-format
+msgid "stat of %s failed"
+msgstr "stat 失敗"
-#: disk-utils/fsck.cramfs.c:589
-#, c-format
-msgid "bogus mode: %s (%o)"
-msgstr "假造模式：%s (%o)"
+#: disk-utils/fdformat.c:226 disk-utils/partx.c:1019 misc-utils/lsblk.c:1663
+#: sys-utils/blkdiscard.c:253 sys-utils/blkzone.c:149
+#: sys-utils/mountpoint.c:109
+#, fuzzy, c-format
+msgid "%s: not a block device"
+msgstr "%s：不是區塊裝置"
-#: disk-utils/fsck.cramfs.c:598
-#, c-format
-msgid "mknod failed: %s"
-msgstr "mknod 失敗：%s"
+#: disk-utils/fdformat.c:231
+#, fuzzy
+msgid "could not determine current format type"
+msgstr "無法決定目前的格式類型"
-#: disk-utils/fsck.cramfs.c:630
+#: disk-utils/fdformat.c:233
#, c-format
-msgid "directory data start (%ld) < sizeof(struct cramfs_super) + start (%ld)"
-msgstr "目錄資料起始 (%ld) < sizeof(struct cramfs_super) + 起始 (%ld)"
+msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
+msgstr "%s面、%d 磁軌、%d 磁區/磁軌。總容量 %d kB。\n"
-#: disk-utils/fsck.cramfs.c:634
-#, c-format
-msgid "directory data end (%ld) != file data start (%ld)"
-msgstr "目錄資料結束 (%ld) != 檔案資料起始 (%ld)"
+#: disk-utils/fdformat.c:234
+msgid "Double"
+msgstr "雙"
-#: disk-utils/fsck.cramfs.c:639
-msgid "invalid file data offset"
-msgstr "無效的檔案資料偏移值"
+#: disk-utils/fdformat.c:234
+msgid "Single"
+msgstr "單"
-#: disk-utils/fsck.cramfs.c:686
-msgid "compiled without -x support"
-msgstr "編譯時不具 -x 支援"
+#: disk-utils/fdformat.c:241
+msgid "user defined start track exceeds the medium specific maximum"
+msgstr ""
-#: disk-utils/fsck.cramfs.c:706
-#, c-format
-msgid "%s: OK\n"
-msgstr "%s：確定\n"
+#: disk-utils/fdformat.c:243
+msgid "user defined end track exceeds the medium specific maximum"
+msgstr ""
+
+#: disk-utils/fdformat.c:245
+msgid "user defined start track exceeds the user defined end track"
+msgstr ""
+
+#: disk-utils/fdformat.c:253 misc-utils/logger.c:1050
+#, fuzzy
+msgid "close failed"
+msgstr "搜尋失敗"
-#: disk-utils/fsck.minix.c:195 disk-utils/swaplabel.c:162
-#: misc-utils/wipefs.c:411 sys-utils/blkdiscard.c:56 sys-utils/tunelp.c:80
+#: disk-utils/fdisk.c:206
#, fuzzy, c-format
-msgid " %s [options] <device>\n"
-msgstr " %s [選項] <device>\n"
+msgid "Select (default %c): "
+msgstr "%s (%u-%u, 預設 %u)："
+
+#: disk-utils/fdisk.c:211
+#, fuzzy, c-format
+msgid "Using default response %c."
+msgstr "使用預設回應 %c\n"
-#: disk-utils/fsck.minix.c:197
+#: disk-utils/fdisk.c:224 disk-utils/fdisk.c:298 disk-utils/fdisk.c:375
+#: libfdisk/src/dos.c:1465 libfdisk/src/gpt.c:2574
#, fuzzy
-msgid " -l list all filenames\n"
-msgstr " -l 列出所有檔名\n"
+msgid "Value out of range."
+msgstr "數值超出範圍。\n"
+
+#: disk-utils/fdisk.c:253
+#, fuzzy, c-format
+msgid "%s (%s, default %c): "
+msgstr "%s (%u-%u, 預設 %u)："
+
+#: disk-utils/fdisk.c:256 disk-utils/fdisk.c:323
+#, fuzzy, c-format
+msgid "%s (%s, default %<PRIu64>): "
+msgstr "%s (%u-%u, 預設 %u)："
+
+#: disk-utils/fdisk.c:261
+#, fuzzy, c-format
+msgid "%s (%c-%c, default %c): "
+msgstr "%s (%u-%u, 預設 %u)："
+
+#: disk-utils/fdisk.c:265 disk-utils/fdisk.c:327
+#, fuzzy, c-format
+msgid "%s (%<PRIu64>-%<PRIu64>, default %<PRIu64>): "
+msgstr "%s (%u-%u, 預設 %u)："
-#: disk-utils/fsck.minix.c:198
+#: disk-utils/fdisk.c:268
+#, fuzzy, c-format
+msgid "%s (%c-%c): "
+msgstr "%s (%s)\n"
+
+#: disk-utils/fdisk.c:271 disk-utils/fdisk.c:330
+#, fuzzy, c-format
+msgid "%s (%<PRIu64>-%<PRIu64>): "
+msgstr "%s (%u-%u, 預設 %u)："
+
+#: disk-utils/fdisk.c:442 disk-utils/sfdisk.c:206
+msgid " [Y]es/[N]o: "
+msgstr ""
+
+#: disk-utils/fdisk.c:486
#, fuzzy
-msgid " -a automatic repair\n"
-msgstr " -a 自動修復\n"
+msgid "Hex code or alias (type L to list all): "
+msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-#: disk-utils/fsck.minix.c:199
+#: disk-utils/fdisk.c:487
#, fuzzy
-msgid " -r interactive repair\n"
-msgstr " -r 互動式修復\n"
+msgid "Partition type or alias (type L to list all): "
+msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-#: disk-utils/fsck.minix.c:200
+#: disk-utils/fdisk.c:490
#, fuzzy
-msgid " -v be verbose\n"
-msgstr " -v 是詳細的\n"
+msgid "Hex code (type L to list all codes): "
+msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-#: disk-utils/fsck.minix.c:201
+#: disk-utils/fdisk.c:491
#, fuzzy
-msgid " -s output super-block information\n"
-msgstr " -s 輸出超區塊資訊\n"
+msgid "Partition type (type L to list all types): "
+msgstr "十六進位編碼 (輸入 L 以列出編碼)："
+
+#: disk-utils/fdisk.c:511
+#, fuzzy, c-format
+msgid "Failed to parse '%s' partition type."
+msgstr "剖析機能『%s 時失敗』"
+
+#: disk-utils/fdisk.c:602
+msgid ""
+"\n"
+"Aliases:\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:202
+#: disk-utils/fdisk.c:628
#, fuzzy
-msgid " -m activate mode not cleared warnings\n"
-msgstr " -m 啟用模式無法清空的警告\n"
+msgid "DOS Compatibility flag is set (DEPRECATED!)"
+msgstr "DOS 相容性旗標已設定 (不宜再用！)\n"
-#: disk-utils/fsck.minix.c:203
+#: disk-utils/fdisk.c:629
#, fuzzy
-msgid " -f force check\n"
-msgstr " -f 強制檢查\n"
+msgid "DOS Compatibility flag is not set"
+msgstr "DOS 相容性旗標未設定\n"
-#. TRANSLATORS: these yes no questions uses rpmatch(), and should be
-#. * translated.
-#: disk-utils/fsck.minix.c:262
+#: disk-utils/fdisk.c:651 disk-utils/fdisk.c:689
#, fuzzy, c-format
-msgid "%s (y/n)? "
-msgstr "%s (y/n)？"
+msgid "Partition %zu does not exist yet!"
+msgstr "分割區 %d 尚不存在！\n"
-#: disk-utils/fsck.minix.c:262
-#, fuzzy, c-format
-msgid "%s (n/y)? "
-msgstr "%s (n/y)？"
+#: disk-utils/fdisk.c:656 disk-utils/fdisk.c:667 libfdisk/src/ask.c:1032
+msgid "Unknown"
+msgstr "未知"
-#: disk-utils/fsck.minix.c:279
+#: disk-utils/fdisk.c:666
#, fuzzy, c-format
-msgid "y\n"
-msgstr "y\n"
+msgid "Changed type of partition '%s' to '%s'."
+msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n"
-#: disk-utils/fsck.minix.c:281
+#: disk-utils/fdisk.c:670
#, fuzzy, c-format
-msgid "n\n"
-msgstr "n\n"
+msgid "Type of partition %zu is unchanged: %s."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: disk-utils/fsck.minix.c:297
+#: disk-utils/fdisk.c:766
#, c-format
-msgid "%s is mounted.\t "
-msgstr "%s 已掛載。\t"
-
-#: disk-utils/fsck.minix.c:299
-msgid "Do you really want to continue"
-msgstr "您真的要繼續嗎？"
+msgid ""
+"\n"
+"%s: offset = %<PRIu64>, size = %zu bytes."
+msgstr ""
-#: disk-utils/fsck.minix.c:303
-#, c-format
-msgid "check aborted.\n"
-msgstr "已放棄檢查。\n"
+#: disk-utils/fdisk.c:772
+#, fuzzy
+msgid "cannot seek"
+msgstr "無法衍生執行"
-#: disk-utils/fsck.minix.c:319 disk-utils/fsck.minix.c:340
-#, c-format
-msgid "Zone nr < FIRSTZONE in file `%s'."
-msgstr "區域 nr < 檔案「%s」中的 FIRSTZONE。"
+#: disk-utils/fdisk.c:777
+#, fuzzy
+msgid "cannot read"
+msgstr "無法讀取 %s"
-#: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:343
-#, c-format
-msgid "Zone nr >= ZONES in file `%s'."
-msgstr "區域 nr >= 檔案「%s」中的 ZONES。"
+#: disk-utils/fdisk.c:788 libfdisk/src/bsd.c:258 libfdisk/src/dos.c:1050
+#: libfdisk/src/gpt.c:2494
+#, fuzzy
+msgid "First sector"
+msgstr "起初 %s"
-#: disk-utils/fsck.minix.c:326 disk-utils/fsck.minix.c:347
-msgid "Remove block"
-msgstr "移除區塊"
+#: disk-utils/fdisk.c:814
+#, fuzzy, c-format
+msgid "BLKGETSIZE ioctl failed on %s"
+msgstr "BLKGETSIZE ioctl 失敗的於 %s"
-#: disk-utils/fsck.minix.c:363
+#: disk-utils/fdisk.c:832
#, c-format
-msgid "Read error: unable to seek to block in file '%s'\n"
-msgstr "讀取錯誤：無法在檔案「%s」中搜尋到區塊\n"
+msgid "The device contains '%s' signature and it will be removed by a write command. See fdisk(8) man page and --wipe option for more details."
+msgstr ""
-#: disk-utils/fsck.minix.c:369
+#: disk-utils/fdisk.c:837
#, c-format
-msgid "Read error: bad block in file '%s'\n"
-msgstr "讀取錯誤：在檔案「%s」中有不良區塊\n"
+msgid "The device contains '%s' signature and it may remain on the device. It is recommended to wipe the device with wipefs(8) or fdisk --wipe, in order to avoid possible collisions."
+msgstr ""
-#: disk-utils/fsck.minix.c:381
+#: disk-utils/fdisk.c:850
#, c-format
msgid ""
-"Internal error: trying to write bad block\n"
-"Write request ignored\n"
+" %1$s [options] <disk> change partition table\n"
+" %1$s [options] -l [<disk>...] list partition table(s)\n"
msgstr ""
-"內部錯誤：嘗試寫入不良區塊\n"
-"寫入要求已忽略\n"
-#: disk-utils/fsck.minix.c:387
-msgid "seek failed in write_block"
-msgstr "write_block 時搜尋失敗"
+#: disk-utils/fdisk.c:858
+#, fuzzy
+msgid " -b, --sector-size <size> physical and logical sector size\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: disk-utils/fsck.minix.c:390
-#, c-format
-msgid "Write error: bad block in file '%s'\n"
-msgstr "寫入錯誤：在檔案「%s」中有不良區塊\n"
+#: disk-utils/fdisk.c:859
+msgid " -B, --protect-boot don't erase bootbits when creating a new label\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:502
-msgid "seek failed in write_super_block"
-msgstr "write_super_block 時搜尋失敗"
+#: disk-utils/fdisk.c:860
+msgid " -c, --compatibility[=<mode>] mode is 'dos' or 'nondos' (default)\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:504
-msgid "unable to write super-block"
-msgstr "無法寫入 super-block"
+#: disk-utils/fdisk.c:862
+#, fuzzy, c-format
+msgid " -L, --color[=<when>] colorize output (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.minix.c:517
-msgid "Unable to write inode map"
-msgstr "無法寫入 inode 對映"
+#: disk-utils/fdisk.c:865
+#, fuzzy
+msgid " -l, --list display partitions and exit\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: disk-utils/fsck.minix.c:520
-msgid "Unable to write zone map"
-msgstr "無法寫入區域對映"
+#: disk-utils/fdisk.c:866
+#, fuzzy
+msgid " -x, --list-details like --list but with more details\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: disk-utils/fsck.minix.c:523
-msgid "Unable to write inodes"
-msgstr "無法寫入 inodes"
+#: disk-utils/fdisk.c:868
+#, fuzzy
+msgid " -n, --noauto-pt don't create default partition table on empty devices\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: disk-utils/fsck.minix.c:555
-msgid "unable to alloc buffer for superblock"
-msgstr "無法配置緩衝區給超區塊"
+#: disk-utils/fdisk.c:869
+#, fuzzy
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: disk-utils/fsck.minix.c:558
-msgid "unable to read super block"
-msgstr "無法讀取超區塊"
+#: disk-utils/fdisk.c:870
+#, fuzzy
+msgid " -t, --type <type> recognize specified partition table type only\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: disk-utils/fsck.minix.c:576
-msgid "bad magic number in super-block"
-msgstr "超區塊中有不當的魔術數字"
+#: disk-utils/fdisk.c:871
+msgid " -u, --units[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
+msgstr ""
-#: disk-utils/fsck.minix.c:578
-msgid "Only 1k blocks/zones supported"
-msgstr "只有支援 1k 區塊/區域"
+#: disk-utils/fdisk.c:872
+#, fuzzy
+msgid " -s, --getsz display device size in 512-byte sectors [DEPRECATED]\n"
+msgstr " -G, --get-glush 顯示預設清理逾時值\n"
-#: disk-utils/fsck.minix.c:580
-msgid "bad s_imap_blocks field in super-block"
-msgstr "超區塊中有不當的 s_imap_blocks 欄位"
+#: disk-utils/fdisk.c:873
+#, fuzzy
+msgid " --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: disk-utils/fsck.minix.c:583
-msgid "bad s_zmap_blocks field in super-block"
-msgstr "超區塊中有不當的 s_zmap_blocks 欄位"
+#: disk-utils/fdisk.c:875
+#, fuzzy, c-format
+msgid " --lock[=<mode>] use exclusive device lock (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.minix.c:599
-msgid "Unable to allocate buffer for inode map"
-msgstr "無法配置 inode 對映緩衝區"
+#: disk-utils/fdisk.c:877
+#, fuzzy, c-format
+msgid " -w, --wipe <mode> wipe signatures (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.minix.c:602
-msgid "Unable to allocate buffer for zone map"
-msgstr "無法配置區域對映緩衝區"
+#: disk-utils/fdisk.c:879 disk-utils/sfdisk.c:2099
+#, fuzzy, c-format
+msgid " -W, --wipe-partitions <mode> wipe signatures from new partitions (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: disk-utils/fsck.minix.c:605
-msgid "Unable to allocate buffer for inodes"
-msgstr "無法配置 inodes 緩衝區"
+#: disk-utils/fdisk.c:882
+#, fuzzy
+msgid " -C, --cylinders <number> specify the number of cylinders\n"
+msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
-#: disk-utils/fsck.minix.c:608
-msgid "Unable to allocate buffer for inode count"
-msgstr "無法配置 inode 計數緩衝區"
+#: disk-utils/fdisk.c:883
+#, fuzzy
+msgid " -H, --heads <number> specify the number of heads\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
-#: disk-utils/fsck.minix.c:611
-msgid "Unable to allocate buffer for zone count"
-msgstr "無法配置區域計數緩衝區"
+#: disk-utils/fdisk.c:884
+#, fuzzy
+msgid " -S, --sectors <number> specify the number of sectors per track\n"
+msgstr " -S# [或 --sectors #]： 設定要用的磁區數量"
-#: disk-utils/fsck.minix.c:615
-msgid "Unable to read inode map"
-msgstr "無法讀取 inode 對映"
+#: disk-utils/fdisk.c:959 disk-utils/fdisk.c:961 disk-utils/partx.c:882
+#, fuzzy
+msgid "invalid sector size argument"
+msgstr "無效的磁區大小引數"
-#: disk-utils/fsck.minix.c:619
-msgid "Unable to read zone map"
-msgstr "無法讀取區域對映"
+#: disk-utils/fdisk.c:971
+#, fuzzy
+msgid "invalid cylinders argument"
+msgstr "無效的磁柱引數"
-#: disk-utils/fsck.minix.c:623
-msgid "Unable to read inodes"
-msgstr "無法讀取 inodes"
+#: disk-utils/fdisk.c:983
+#, fuzzy
+msgid "not found DOS label driver"
+msgstr "找不到未使用的裝置"
-#: disk-utils/fsck.minix.c:625
-#, c-format
-msgid "Warning: Firstzone != Norm_firstzone\n"
-msgstr "警告：Firstzone != Norm_firstzone\n"
+#: disk-utils/fdisk.c:989
+#, fuzzy, c-format
+msgid "unknown compatibility mode '%s'"
+msgstr "不明機能『%s』"
-#: disk-utils/fsck.minix.c:630
-#, c-format
-msgid "%ld inodes\n"
-msgstr "%ld inodes\n"
+#: disk-utils/fdisk.c:996
+#, fuzzy
+msgid "invalid heads argument"
+msgstr "無效的前端引數"
-#: disk-utils/fsck.minix.c:631
-#, c-format
-msgid "%ld blocks\n"
-msgstr "%ld 區塊\n"
+#: disk-utils/fdisk.c:1002
+#, fuzzy
+msgid "invalid sectors argument"
+msgstr "無效的磁區引數"
-#: disk-utils/fsck.minix.c:632 disk-utils/mkfs.minix.c:546
+#: disk-utils/fdisk.c:1034
#, fuzzy, c-format
-msgid "Firstdatazone=%jd (%jd)\n"
-msgstr "第一資料區=%ld (%ld)\n"
+msgid "unsupported disklabel: %s"
+msgstr "不受支援的引數：%s"
-#: disk-utils/fsck.minix.c:633
-#, c-format
-msgid "Zonesize=%d\n"
-msgstr "區域大小=%d\n"
+#: disk-utils/fdisk.c:1042
+#, fuzzy
+msgid "unsupported unit"
+msgstr "不受支援的引數：%s"
-#: disk-utils/fsck.minix.c:634
-#, fuzzy, c-format
-msgid "Maxsize=%zu\n"
-msgstr "最大大小=%ld\n"
+#: disk-utils/fdisk.c:1050 disk-utils/fdisk.c:1055 disk-utils/sfdisk.c:2311
+#: disk-utils/sfdisk.c:2316
+#, fuzzy
+msgid "unsupported wipe mode"
+msgstr "不受支援的命令"
+
+#: disk-utils/fdisk.c:1076
+#, fuzzy
+msgid "The device properties (sector size and geometry) should be used with one specified device only."
+msgstr "警告：-b (設定磁區大小) 選項應該與一個指定裝置共同使用\n"
+
+#: disk-utils/fdisk.c:1107 disk-utils/fdisk.c:1122 disk-utils/fsck.cramfs.c:723
+#: disk-utils/mkfs.bfs.c:211 disk-utils/mkfs.cramfs.c:799
+#: disk-utils/partx.c:975 disk-utils/raw.c:136 disk-utils/raw.c:149
+#: disk-utils/raw.c:161 disk-utils/raw.c:202 misc-utils/cal.c:525
+#: misc-utils/findfs.c:58 misc-utils/look.c:147 misc-utils/whereis.c:592
+#: misc-utils/whereis.c:603 misc-utils/whereis.c:614 misc-utils/whereis.c:659
+#: schedutils/chrt.c:442 schedutils/ionice.c:264 schedutils/taskset.c:207
+#: sys-utils/chcpu.c:355 sys-utils/chmem.c:429 sys-utils/dmesg.c:1579
+#: sys-utils/ipcmk.c:143 sys-utils/ldattach.c:321 sys-utils/losetup.c:918
+#: sys-utils/lscpu.c:1350 sys-utils/lsmem.c:656 sys-utils/mount.c:867
+#: sys-utils/mount.c:875 sys-utils/mount.c:924 sys-utils/mount.c:937
+#: sys-utils/mount.c:1009 sys-utils/mountpoint.c:191 sys-utils/pivot_root.c:71
+#: sys-utils/swapoff.c:258 sys-utils/swapon.c:1011 sys-utils/switch_root.c:270
+#: sys-utils/umount.c:629 term-utils/setterm.c:1197 text-utils/col.c:584
+#: text-utils/more.c:2096
+#, fuzzy
+msgid "bad usage"
+msgstr "不當的值"
-#: disk-utils/fsck.minix.c:635
+#: disk-utils/fdisk.c:1128
#, c-format
-msgid "Filesystem state=%d\n"
-msgstr "檔案系統狀態=%d\n"
+msgid "Welcome to fdisk (%s)."
+msgstr ""
-#: disk-utils/fsck.minix.c:636
-#, fuzzy, c-format
+#: disk-utils/fdisk.c:1130 disk-utils/sfdisk.c:1808
+#, fuzzy
msgid ""
-"namelen=%zd\n"
+"Changes will remain in memory only, until you decide to write them.\n"
+"Be careful before using the write command.\n"
+msgstr ""
+"歡迎使用 fdisk (%s)。\n"
+"\n"
+"變更將剩下在中記憶體只有，直到您決定到寫入它們。\n"
+"請小心之前使用寫入命令。\n"
"\n"
+
+#: disk-utils/fdisk.c:1145
+#, fuzzy
+msgid ""
+"This disk is currently in use - repartitioning is probably a bad idea.\n"
+"It's recommended to umount all file systems, and swapoff all swap\n"
+"partitions on this disk.\n"
msgstr ""
-"namelen=%zd\n"
"\n"
+"這個磁碟目前在使用中 - 重新設定分割區可能不是個好主意。\n"
+"卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n"
+"使用 --no-reread 旗標以抑制這個檢查。\n"
-#: disk-utils/fsck.minix.c:651 disk-utils/fsck.minix.c:701
-#, c-format
-msgid "Inode %d marked unused, but used for file '%s'\n"
-msgstr "Inode %d 標記為未使用，但是卻用於檔案「%s」\n"
+#: disk-utils/fdisk.c:1168
+msgid "A hybrid GPT was detected. You have to sync the hybrid MBR manually (expert command 'M')."
+msgstr ""
-#: disk-utils/fsck.minix.c:654 disk-utils/fsck.minix.c:704
-msgid "Mark in use"
-msgstr "標記為使用中"
+#: disk-utils/fdisk-list.c:43
+#, fuzzy, c-format
+msgid "Disklabel type: %s"
+msgstr "硬碟: %s\n"
-#: disk-utils/fsck.minix.c:676 disk-utils/fsck.minix.c:724
-#, c-format
-msgid "The file `%s' has mode %05o\n"
-msgstr "檔案「%s」具有模式 %05o\n"
+#: disk-utils/fdisk-list.c:47
+#, fuzzy, c-format
+msgid "Disk identifier: %s"
+msgstr "磁碟識別碼：0x%08x\n"
-#: disk-utils/fsck.minix.c:683 disk-utils/fsck.minix.c:730
-#, c-format
-msgid "Warning: inode count too big.\n"
-msgstr "警告：inode 數量太大。\n"
+#: disk-utils/fdisk-list.c:61
+#, fuzzy, c-format
+msgid "Disk %s: %s, %ju bytes, %ju sectors"
+msgstr ""
+"\n"
+"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: disk-utils/fsck.minix.c:742 disk-utils/fsck.minix.c:750
-msgid "root inode isn't a directory"
-msgstr "根 inode 並非目錄"
+#: disk-utils/fdisk-list.c:68
+#, fuzzy, c-format
+msgid "Disk model: %s"
+msgstr "磁碟：%.*s\n"
-#: disk-utils/fsck.minix.c:762 disk-utils/fsck.minix.c:793
-#, c-format
-msgid "Block has been used before. Now in file `%s'."
-msgstr "區塊於之前已使用。現在屬於檔案「%s」。"
+#: disk-utils/fdisk-list.c:71
+#, fuzzy, c-format
+msgid "Geometry: %d heads, %ju sectors/track, %ju cylinders"
+msgstr "%d 前端，%llu 磁區/軌段，%llu 磁柱\n"
-#: disk-utils/fsck.minix.c:764 disk-utils/fsck.minix.c:795
-#: disk-utils/fsck.minix.c:1116 disk-utils/fsck.minix.c:1125
-#: disk-utils/fsck.minix.c:1172 disk-utils/fsck.minix.c:1181
-msgid "Clear"
-msgstr "清除"
+#: disk-utils/fdisk-list.c:76 disk-utils/fdisk-list.c:299
+#, fuzzy, c-format
+msgid "Units: %s of %d * %ld = %ld bytes"
+msgstr "單位=%s 的 %d * %ld=%ld 位元組\n"
-#: disk-utils/fsck.minix.c:774 disk-utils/fsck.minix.c:805
-#, c-format
-msgid "Block %d in file `%s' is marked not in use."
-msgstr "檔案「%2$s」中的 區塊 %1$d 已標記為未被使用。"
+#: disk-utils/fdisk-list.c:82 disk-utils/fdisk-list.c:305
+#, fuzzy, c-format
+msgid "Sector size (logical/physical): %lu bytes / %lu bytes"
+msgstr "磁區大小 (邏輯的/實體)：%lu 位元組/%lu 位元組\n"
-#: disk-utils/fsck.minix.c:776 disk-utils/fsck.minix.c:807
-msgid "Correct"
-msgstr "修正"
+#: disk-utils/fdisk-list.c:85
+#, fuzzy, c-format
+msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes"
+msgstr "I/O 大小 (最小/最佳化)：%lu 位元組 / %lu 位元組\n"
-#: disk-utils/fsck.minix.c:946 disk-utils/fsck.minix.c:1014
-#, c-format
-msgid "The directory '%s' contains a bad inode number for file '%.*s'."
-msgstr "目錄「%s」含有不當的 inode 編號於檔案「%.*s」。"
+#: disk-utils/fdisk-list.c:89
+#, fuzzy, c-format
+msgid "Alignment offset: %lu bytes"
+msgstr "對齊偏移值：%lu 位元組\n"
-#: disk-utils/fsck.minix.c:948 disk-utils/fsck.minix.c:1016
-msgid " Remove"
-msgstr " 移除"
+#: disk-utils/fdisk-list.c:120 disk-utils/fdisk-list.c:241
+#: disk-utils/fsck.c:1260
+#, fuzzy
+msgid "failed to allocate iterator"
+msgstr "配置迭代器時失敗"
-#: disk-utils/fsck.minix.c:962 disk-utils/fsck.minix.c:1030
-#, c-format
-msgid "%s: bad directory: '.' isn't first\n"
-msgstr "%s：不當的目錄：「.」不是第一個\n"
+#: disk-utils/fdisk-list.c:126 disk-utils/fdisk-list.c:247
+#: disk-utils/partx.c:669 login-utils/lslogins.c:1113 misc-utils/fincore.c:357
+#: misc-utils/findmnt.c:1763 misc-utils/lsblk.c:2351 misc-utils/lsfd.c:1970
+#: misc-utils/lslocks.c:472 misc-utils/uuidparse.c:252 misc-utils/wipefs.c:157
+#: sys-utils/losetup.c:325 sys-utils/lscpu.c:604 sys-utils/lscpu.c:759
+#: sys-utils/lscpu.c:970 sys-utils/lsipc.c:354 sys-utils/prlimit.c:311
+#: sys-utils/rfkill.c:474 sys-utils/swapon.c:296 sys-utils/wdctl.c:349
+#: sys-utils/zramctl.c:496 text-utils/column.c:217
+#, fuzzy
+msgid "failed to allocate output table"
+msgstr "初始化輸出表格時失敗"
-#: disk-utils/fsck.minix.c:971 disk-utils/fsck.minix.c:1039
-#, c-format
-msgid "%s: bad directory: '..' isn't second\n"
-msgstr "%s：不當的目錄：「..」不是第二個\n"
+#: disk-utils/fdisk-list.c:167 disk-utils/fdisk-list.c:271
+#: disk-utils/partx.c:583 login-utils/lslogins.c:1173 misc-utils/fincore.c:123
+#: misc-utils/findmnt.c:788 misc-utils/findmnt.c:806 misc-utils/lsblk.c:1231
+#: misc-utils/lsfd.c:1134 misc-utils/lslocks.c:400 misc-utils/uuidparse.c:154
+#: misc-utils/wipefs.c:202 sys-utils/losetup.c:348 sys-utils/losetup.c:377
+#: sys-utils/lscpu.c:518 sys-utils/lscpu.c:794 sys-utils/lscpu.c:826
+#: sys-utils/lsipc.c:486 sys-utils/lsipc.c:567 sys-utils/lsipc.c:669
+#: sys-utils/lsipc.c:761 sys-utils/lsipc.c:925 sys-utils/prlimit.c:240
+#: sys-utils/rfkill.c:389 sys-utils/swapon.c:179 sys-utils/wdctl.c:299
+#: sys-utils/zramctl.c:414 text-utils/column.c:559 text-utils/column.c:584
+#, fuzzy
+msgid "failed to allocate output line"
+msgstr "callocate cpu 集合時失敗"
-#: disk-utils/fsck.minix.c:1073 disk-utils/fsck.minix.c:1090
-msgid "internal error"
-msgstr "內部錯誤"
+#: disk-utils/fdisk-list.c:177 disk-utils/fdisk-list.c:278
+#: disk-utils/partx.c:646 login-utils/lslogins.c:1277 misc-utils/fincore.c:159
+#: misc-utils/findmnt.c:792 misc-utils/findmnt.c:811 misc-utils/lsblk.c:1272
+#: misc-utils/lsfd-bdev.c:48 misc-utils/lsfd-bdev.c:61
+#: misc-utils/lsfd-bdev.c:87 misc-utils/lsfd-bdev.c:89
+#: misc-utils/lsfd-cdev.c:49 misc-utils/lsfd-cdev.c:66
+#: misc-utils/lsfd-cdev.c:101 misc-utils/lsfd-cdev.c:103
+#: misc-utils/lsfd-fifo.c:59 misc-utils/lsfd-fifo.c:91
+#: misc-utils/lsfd-fifo.c:93 misc-utils/lsfd-file.c:131
+#: misc-utils/lsfd-file.c:137 misc-utils/lsfd-file.c:143
+#: misc-utils/lsfd-file.c:150 misc-utils/lsfd-file.c:157
+#: misc-utils/lsfd-file.c:162 misc-utils/lsfd-file.c:274
+#: misc-utils/lsfd-file.c:276 misc-utils/lsfd-file.c:444
+#: misc-utils/lsfd-file.c:451 misc-utils/lsfd-sock.c:54
+#: misc-utils/lsfd-sock.c:114 misc-utils/lsfd-sock.c:116
+#: misc-utils/lsfd-unkn.c:114 misc-utils/lsfd-unkn.c:116
+#: misc-utils/lslocks.c:459 misc-utils/uuidparse.c:239 misc-utils/wipefs.c:242
+#: sys-utils/losetup.c:305 sys-utils/lscpu.c:586 sys-utils/lscpu.c:801
+#: sys-utils/lscpu.c:830 sys-utils/lscpu.c:840 sys-utils/lsipc.c:526
+#: sys-utils/lsipc.c:651 sys-utils/prlimit.c:275 sys-utils/rfkill.c:417
+#: sys-utils/swapon.c:227 sys-utils/wdctl.c:327 sys-utils/zramctl.c:481
+#: text-utils/column.c:568
+#, fuzzy
+msgid "failed to add output data"
+msgstr "加入輸出列時失敗"
+
+#: disk-utils/fdisk-list.c:197
+#, fuzzy, c-format
+msgid "Partition %zu does not start on physical sector boundary."
+msgstr "分割區 %i 並非開始於磁柱邊界。\n"
-#: disk-utils/fsck.minix.c:1076 disk-utils/fsck.minix.c:1093
+#: disk-utils/fdisk-list.c:205
#, c-format
-msgid "%s: bad directory: size < 32"
-msgstr "%s：不當的目錄：大小 < 32"
+msgid "Filesystem/RAID signature on partition %zu will be wiped."
+msgstr ""
-#: disk-utils/fsck.minix.c:1105
-msgid "seek failed in bad_zone"
-msgstr "在損毀區域中搜尋失敗"
+#: disk-utils/fdisk-list.c:214
+#, fuzzy
+msgid "Partition table entries are not in disk order."
+msgstr ""
+"\n"
+"分割表項目未按磁碟排序\n"
-#: disk-utils/fsck.minix.c:1115 disk-utils/fsck.minix.c:1171
-#, fuzzy, c-format
-msgid "Inode %lu mode not cleared."
-msgstr "Inode %lu 模式無法清空。"
+#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1026 libfdisk/src/dos.c:2803
+#: libfdisk/src/gpt.c:3244 libfdisk/src/sgi.c:1159 libfdisk/src/sun.c:1130
+#, fuzzy
+msgid "Start"
+msgstr "啟始"
-#: disk-utils/fsck.minix.c:1124 disk-utils/fsck.minix.c:1180
-#, fuzzy, c-format
-msgid "Inode %lu not used, marked used in the bitmap."
-msgstr "Inode %lu 未使用，標記的已用於位元圖。"
+#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1027 libfdisk/src/dos.c:2804
+#: libfdisk/src/gpt.c:3245 libfdisk/src/sgi.c:1160 libfdisk/src/sun.c:1131
+msgid "End"
+msgstr "結束"
-#: disk-utils/fsck.minix.c:1130 disk-utils/fsck.minix.c:1186
-#, fuzzy, c-format
-msgid "Inode %lu used, marked unused in the bitmap."
-msgstr "Inode %lu 使用，標記的未使用的在中位元圖。"
+#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1028 libfdisk/src/dos.c:2805
+#: libfdisk/src/gpt.c:3246 libfdisk/src/sgi.c:1161 libfdisk/src/sun.c:1132
+msgid "Sectors"
+msgstr "磁區"
-#: disk-utils/fsck.minix.c:1131 disk-utils/fsck.minix.c:1187
-msgid "Set"
-msgstr "設定"
+#: disk-utils/fdisk-list.c:233 libfdisk/src/bsd.c:1030 libfdisk/src/dos.c:2807
+#: libfdisk/src/gpt.c:3247 libfdisk/src/sgi.c:1163 libfdisk/src/sun.c:1134
+msgid "Size"
+msgstr ""
-#: disk-utils/fsck.minix.c:1135 disk-utils/fsck.minix.c:1191
+#: disk-utils/fdisk-list.c:293
#, fuzzy, c-format
-msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
-msgstr "Inode %lu (模式=%07o)，inlinks=%d(_N)，計數=%d。"
-
-#: disk-utils/fsck.minix.c:1138 disk-utils/fsck.minix.c:1194
-msgid "Set i_nlinks to count"
-msgstr "設定 in_links 加入計數"
+msgid "Unpartitioned space %s: %s, %ju bytes, %ju sectors"
+msgstr ""
+"\n"
+"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: disk-utils/fsck.minix.c:1150 disk-utils/fsck.minix.c:1206
+#: disk-utils/fdisk-list.c:483
#, fuzzy, c-format
-msgid "Zone %lu: marked in use, no file uses it."
-msgstr "區 %lu：標記的在中使用，沒有檔案使用它。"
+msgid "%s unknown column: %s"
+msgstr "不明直欄：%s"
-#: disk-utils/fsck.minix.c:1152 disk-utils/fsck.minix.c:1208
-msgid "Unmark"
-msgstr "取消標記"
+#: disk-utils/fdisk-menu.c:96
+msgid "Generic"
+msgstr ""
-#: disk-utils/fsck.minix.c:1157 disk-utils/fsck.minix.c:1213
-#, fuzzy, c-format
-msgid "Zone %lu: in use, counted=%d\n"
-msgstr "å\8d\80 %luï¼\9aå\9c¨ä¸ä½¿ç\94¨ï¼\8cè¨\88æ\95¸=%d\n"
+#: disk-utils/fdisk-menu.c:97
+#, fuzzy
+msgid "delete a partition"
+msgstr "å\88ªé\99¤å\88\86å\89²"
-#: disk-utils/fsck.minix.c:1160 disk-utils/fsck.minix.c:1216
-#, fuzzy, c-format
-msgid "Zone %lu: not in use, counted=%d\n"
-msgstr "區 %lu：不在使用中，計數=%d\n"
+#: disk-utils/fdisk-menu.c:98
+#, fuzzy
+msgid "list free unpartitioned space"
+msgstr "清單進階分割區"
-#: disk-utils/fsck.minix.c:1257
-msgid "bad inode size"
-msgstr "不當的 inode 大小"
+#: disk-utils/fdisk-menu.c:99
+#, fuzzy
+msgid "list known partition types"
+msgstr "清單已知分割區類型"
-#: disk-utils/fsck.minix.c:1259
-msgid "bad v2 inode size"
-msgstr "不當的 v2 inode 大小"
+#: disk-utils/fdisk-menu.c:100
+#, fuzzy
+msgid "add a new partition"
+msgstr "加入新的分割"
-#: disk-utils/fsck.minix.c:1303
-msgid "need terminal for interactive repairs"
-msgstr "需要終端機以進行互動式修復"
+#: disk-utils/fdisk-menu.c:101
+#, fuzzy
+msgid "print the partition table"
+msgstr "列印分割表"
-#: disk-utils/fsck.minix.c:1307
-#, fuzzy, c-format
-msgid "cannot open %s: %s"
-msgstr "無法開啟 %s：%s"
+#: disk-utils/fdisk-menu.c:102
+#, fuzzy
+msgid "change a partition type"
+msgstr "變更分割系統識別號"
-#: disk-utils/fsck.minix.c:1318
-#, c-format
-msgid "%s is clean, no check.\n"
-msgstr "%s 已清除，不做檢查。\n"
+#: disk-utils/fdisk-menu.c:103
+#, fuzzy
+msgid "verify the partition table"
+msgstr "驗證分割表"
-#: disk-utils/fsck.minix.c:1321
-#, c-format
-msgid "Forcing filesystem check on %s.\n"
-msgstr "強制檢查 %s 檔案系統。\n"
+#: disk-utils/fdisk-menu.c:104
+#, fuzzy
+msgid "print information about a partition"
+msgstr "%s：不是區塊裝置"
-#: disk-utils/fsck.minix.c:1323
-#, c-format
-msgid "Filesystem on %s is dirty, needs checking.\n"
-msgstr "%s 檔案系統不乾淨，需要檢查。\n"
+#: disk-utils/fdisk-menu.c:106
+#, fuzzy
+msgid "print the raw data of the first sector from the device"
+msgstr "列印未經處理資料在中分割表"
-#: disk-utils/fsck.minix.c:1355
-#, c-format
-msgid ""
-"\n"
-"%6ld inodes used (%ld%%)\n"
-msgstr ""
-"\n"
-"%6ld inodes 已使用 (%ld%%)\n"
+#: disk-utils/fdisk-menu.c:107
+#, fuzzy
+msgid "print the raw data of the disklabel from the device"
+msgstr "列印未經處理資料在中分割表"
-#: disk-utils/fsck.minix.c:1361
-#, c-format
-msgid "%6ld zones used (%ld%%)\n"
-msgstr "%6ld 區域已使用 (%ld%%)\n"
+#: disk-utils/fdisk-menu.c:108
+#, fuzzy
+msgid "fix partitions order"
+msgstr "修正分割排序"
-#: disk-utils/fsck.minix.c:1363
-#, c-format
-msgid ""
-"\n"
-"%6d regular files\n"
-"%6d directories\n"
-"%6d character device files\n"
-"%6d block device files\n"
-"%6d links\n"
-"%6d symbolic links\n"
-"------\n"
-"%6d files\n"
+#: disk-utils/fdisk-menu.c:110
+msgid "Misc"
msgstr ""
-"\n"
-"%6d 標準檔案\n"
-"%6d 目錄\n"
-"%6d 字元裝置檔案\n"
-"%6d 區塊裝置檔案\n"
-"%6d 鏈結\n"
-"%6d 符號連結\n"
-"------\n"
-"%6d 檔案\n"
-#: disk-utils/fsck.minix.c:1377
-#, c-format
-msgid ""
-"----------------------------\n"
-"FILE SYSTEM HAS BEEN CHANGED\n"
-"----------------------------\n"
-msgstr ""
-"----------------------------\n"
-"檔案系統已變更\n"
-"----------------------------\n"
+#: disk-utils/fdisk-menu.c:111
+#, fuzzy
+msgid "print this menu"
+msgstr "印出這份選單"
-#: disk-utils/isosize.c:136
-#, c-format
-msgid "%s: might not be an ISO filesystem"
-msgstr ""
+#: disk-utils/fdisk-menu.c:112
+#, fuzzy
+msgid "change display/entry units"
+msgstr "變更顯示/條目單位"
-#: disk-utils/isosize.c:139
-#, fuzzy, c-format
-msgid "seek error on %s"
-msgstr "尋指錯誤於 %s"
+#: disk-utils/fdisk-menu.c:113
+#, fuzzy
+msgid "extra functionality (experts only)"
+msgstr "額外功能性 (專家限用)"
-#: disk-utils/isosize.c:142
-#, fuzzy, c-format
-msgid "read error on %s"
-msgstr "讀取錯誤於 %s"
+#: disk-utils/fdisk-menu.c:115
+msgid "Script"
+msgstr ""
-#: disk-utils/isosize.c:149
-#, c-format
-msgid "sector count: %d, sector size: %d\n"
-msgstr "磁區數量：%d, 磁區大小：%d\n"
+#: disk-utils/fdisk-menu.c:116
+msgid "load disk layout from sfdisk script file"
+msgstr ""
-#: disk-utils/isosize.c:168
-#, fuzzy, c-format
-msgid " %s [options] <iso9660_image_file>\n"
+#: disk-utils/fdisk-menu.c:117
+msgid "dump disk layout to sfdisk script file"
msgstr ""
-"\n"
-"用法：\n"
-" %s [選項] iso9660_image_file\n"
-#: disk-utils/isosize.c:171
-msgid " -d, --divisor=<number> divide the amount of bytes by <number>\n"
+#: disk-utils/fdisk-menu.c:119
+msgid "Save & Exit"
msgstr ""
-#: disk-utils/isosize.c:172
+#: disk-utils/fdisk-menu.c:120
#, fuzzy
-msgid " -x, --sectors show sector count and size\n"
-msgstr " -c, --creator 顯示建立者和擁有者\n"
+msgid "write table to disk and exit"
+msgstr "寫入表格到磁碟然後離開"
-#: disk-utils/isosize.c:204
+#: disk-utils/fdisk-menu.c:121
#, fuzzy
-msgid "invalid divisor argument"
-msgstr "無效的除數引數"
-
-#: disk-utils/mkfs.bfs.c:73
-#, fuzzy, c-format
-msgid "Usage: %s [options] device [block-count]\n"
-msgstr "用法：%s [選項] 裝置 [block-count]\n"
-
-#: disk-utils/mkfs.bfs.c:75
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -N, --inodes=NUM specify desired number of inodes\n"
-" -V, --vname=NAME specify volume name\n"
-" -F, --fname=NAME specify file system name\n"
-" -v, --verbose explain what is being done\n"
-" -c this option is silently ignored\n"
-" -l this option is silently ignored\n"
-" -V, --version output version information and exit\n"
-" -V as version must be only option\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -N, --inodes=NUM 指定設想的 inodes 數量\n"
-" -V, --vname=名稱 指定卷冊名稱\n"
-" -F, --fname=名稱 指定檔案系統名稱\n"
-" -v, --verbose 解釋什麼正在是已完成\n"
-" -c 這個選項是寂靜的忽略\n"
-" -l 這個選項是寂靜的忽略\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -V 做為版本必須是只有選項\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+msgid "write table to disk"
+msgstr "寫入 disklabel 到磁碟"
-#: disk-utils/mkfs.bfs.c:139
+#: disk-utils/fdisk-menu.c:122
#, fuzzy
-msgid "invalid number of inodes"
-msgstr "無效的 inodes 數量"
+msgid "quit without saving changes"
+msgstr "離開但不儲存變更"
-#: disk-utils/mkfs.bfs.c:145
-msgid "volume name too long"
-msgstr "卷冊名稱太長"
+#: disk-utils/fdisk-menu.c:123
+#, fuzzy
+msgid "return to main menu"
+msgstr "回傳到主選單"
-#: disk-utils/mkfs.bfs.c:152
-msgid "fsname name too long"
-msgstr "檔案系統名稱太長"
+#: disk-utils/fdisk-menu.c:125
+msgid "return from BSD to DOS (MBR)"
+msgstr ""
-#: disk-utils/mkfs.bfs.c:183
-#, c-format
-msgid "%s is not a block special device"
-msgstr "%s 並非區塊特殊裝置"
+#: disk-utils/fdisk-menu.c:127 disk-utils/fdisk-menu.c:227
+msgid "return from protective/hybrid MBR to GPT"
+msgstr ""
-#: disk-utils/mkfs.bfs.c:191
+#: disk-utils/fdisk-menu.c:138
#, fuzzy
-msgid "invalid block-count"
-msgstr "無效的 block-count"
-
-#: disk-utils/mkfs.bfs.c:197
-#, c-format
-msgid "cannot get size of %s"
-msgstr "無法取得 %s 的大小"
+msgid "Create a new label"
+msgstr "建立新的清空 Sun disklabel"
-#: disk-utils/mkfs.bfs.c:202
-#, c-format
-msgid "blocks argument too large, max is %llu"
-msgstr "å\8d\80å¡\8aå¼\95æ\95¸å¤ªå¤§ï¼\8cæ\9c\80大æ\98¯ %llu"
+#: disk-utils/fdisk-menu.c:139
+#, fuzzy
+msgid "create a new empty GPT partition table"
+msgstr "建ç«\8bæ\96°ç\9a\84æ¸\85空 DOS å\88\86å\89²è¡¨"
-#: disk-utils/mkfs.bfs.c:217
-msgid "too many inodes - max is 512"
-msgstr "太多 inodes - 最大為 512"
+#: disk-utils/fdisk-menu.c:140
+#, fuzzy
+msgid "create a new empty SGI (IRIX) partition table"
+msgstr "建立新的清空 DOS 分割表"
-#: disk-utils/mkfs.bfs.c:227
-#, c-format
-msgid "not enough space, need at least %llu blocks"
-msgstr "沒有足夠的空間，需要至少 %llu 區塊"
+#: disk-utils/fdisk-menu.c:141
+#, fuzzy
+msgid "create a new empty MBR (DOS) partition table"
+msgstr "建立新的清空 DOS 分割表"
-#: disk-utils/mkfs.bfs.c:239
-#, c-format
-msgid "Device: %s\n"
-msgstr "裝置：%s\n"
+#: disk-utils/fdisk-menu.c:142
+#, fuzzy
+msgid "create a new empty Sun partition table"
+msgstr "建立新的清空 DOS 分割表"
-#: disk-utils/mkfs.bfs.c:240
-#, c-format
-msgid "Volume: <%-6s>\n"
-msgstr "å\8d·å\86\8aï¼\9a<%-6s>\n"
+#: disk-utils/fdisk-menu.c:146
+#, fuzzy
+msgid "create an IRIX (SGI) partition table"
+msgstr "建ç«\8b IRIX (SGI) å\88\86å\89²è¡¨"
-#: disk-utils/mkfs.bfs.c:241
-#, c-format
-msgid "FSname: <%-6s>\n"
-msgstr "檔案系統名稱：<%-6s>\n"
+#: disk-utils/fdisk-menu.c:155
+msgid "Geometry (for the current label)"
+msgstr ""
-#: disk-utils/mkfs.bfs.c:242
-#, c-format
-msgid "BlockSize: %d\n"
-msgstr "區塊大小：%d\n"
+#: disk-utils/fdisk-menu.c:156
+#, fuzzy
+msgid "change number of cylinders"
+msgstr "變更磁柱數量"
-#: disk-utils/mkfs.bfs.c:244
-#, fuzzy, c-format
-msgid "Inodes: %lu (in 1 block)\n"
-msgstr "Inodes：%lu (在中 1 區塊)\n"
+#: disk-utils/fdisk-menu.c:157
+#, fuzzy
+msgid "change number of heads"
+msgstr "變更前端數量"
-#: disk-utils/mkfs.bfs.c:247
-#, fuzzy, c-format
-msgid "Inodes: %lu (in %llu blocks)\n"
-msgstr "Inodes：%lu (在中 %llu 區塊)\n"
+#: disk-utils/fdisk-menu.c:158
+#, fuzzy
+msgid "change number of sectors/track"
+msgstr "變更磁區數量/軌段"
-#: disk-utils/mkfs.bfs.c:249
-#, c-format
-msgid "Blocks: %lld\n"
-msgstr "區塊：%lld\n"
+#: disk-utils/fdisk-menu.c:167 include/pt-mbr-partnames.h:102
+msgid "GPT"
+msgstr "GPT"
-#: disk-utils/mkfs.bfs.c:250
-#, c-format
-msgid "Inode end: %d, Data end: %d\n"
-msgstr "Inode 結束：%d, 資料結束：%d\n"
+#: disk-utils/fdisk-menu.c:168
+#, fuzzy
+msgid "change disk GUID"
+msgstr "已變更"
-#: disk-utils/mkfs.bfs.c:255
-msgid "error writing superblock"
-msgstr "寫入超區塊時發生錯誤"
+#: disk-utils/fdisk-menu.c:169
+#, fuzzy
+msgid "change partition name"
+msgstr "分割名稱"
-#: disk-utils/mkfs.bfs.c:276
-msgid "error writing root inode"
-msgstr "寫入根 inode 時發生錯誤"
+#: disk-utils/fdisk-menu.c:170
+#, fuzzy
+msgid "change partition UUID"
+msgstr "分割 UUID"
-#: disk-utils/mkfs.bfs.c:281
-msgid "error writing inode"
-msgstr "寫入 inode 時發生錯誤"
+#: disk-utils/fdisk-menu.c:171
+#, fuzzy
+msgid "change table length"
+msgstr "剖析長度時失敗"
-#: disk-utils/mkfs.bfs.c:284
-msgid "seek error"
-msgstr "尋找錯誤"
+#: disk-utils/fdisk-menu.c:172
+msgid "enter protective/hybrid MBR"
+msgstr ""
-#: disk-utils/mkfs.bfs.c:290
-msgid "error writing . entry"
-msgstr "寫入 . 項目時發生錯誤"
+#: disk-utils/fdisk-menu.c:175
+#, fuzzy
+msgid "toggle the legacy BIOS bootable flag"
+msgstr "切換可開機的旗標"
-#: disk-utils/mkfs.bfs.c:294
-msgid "error writing .. entry"
-msgstr "寫入 .. 項目時發生錯誤"
+#: disk-utils/fdisk-menu.c:176
+#, fuzzy
+msgid "toggle the no block IO protocol flag"
+msgstr "切換 DOS 相容性旗標"
-#: disk-utils/mkfs.bfs.c:297
-#, c-format
-msgid "error closing %s"
-msgstr "關閉 %s 時發生錯誤"
+#: disk-utils/fdisk-menu.c:177
+#, fuzzy
+msgid "toggle the required partition flag"
+msgstr "切換 DOS 相容性旗標"
-#: disk-utils/mkfs.c:38
-#, fuzzy, c-format
-msgid "Usage:\n"
+#: disk-utils/fdisk-menu.c:178
+msgid "toggle the GUID specific bits"
msgstr ""
-"\n"
-"用法：\n"
-
-#: disk-utils/mkfs.c:39
-#, fuzzy, c-format
-msgid " %s [options] [-t <type>] [fs-options] <device> [<size>]\n"
-msgstr "用法：%s [選項] [-t 型態 fs-options] 裝置 [大小]\n"
-#: disk-utils/mkfs.c:42 include/c.h:276 misc-utils/getopt.c:322
-#: misc-utils/look.c:370 misc-utils/mcookie.c:72 misc-utils/namei.c:422
-#: misc-utils/uuidd.c:74 misc-utils/uuidgen.c:38 misc-utils/wipefs.c:413
-#: sys-utils/hwclock.c:1463 sys-utils/renice.c:62 term-utils/script.c:134
-#: term-utils/scriptreplay.c:45 term-utils/setterm.c:680 term-utils/write.c:85
-#, c-format
-msgid ""
-"\n"
-"Options:\n"
+#: disk-utils/fdisk-menu.c:188
+msgid "Sun"
msgstr ""
-"\n"
-"選項：\n"
-#: disk-utils/mkfs.c:43
-#, c-format
-msgid " -t, --type=<type> filesystem type; when unspecified, ext2 is used\n"
-msgstr ""
+#: disk-utils/fdisk-menu.c:189
+#, fuzzy
+msgid "toggle the read-only flag"
+msgstr "切換唯讀旗標"
-#: disk-utils/mkfs.c:44
-#, c-format
-msgid " fs-options parameters for the real filesystem builder\n"
-msgstr ""
+#: disk-utils/fdisk-menu.c:190
+#, fuzzy
+msgid "toggle the mountable flag"
+msgstr "切換 mountable 旗標"
-#: disk-utils/mkfs.c:45
-#, c-format
-msgid " <device> path to the device to be used\n"
-msgstr ""
+#: disk-utils/fdisk-menu.c:192
+#, fuzzy
+msgid "change number of alternate cylinders"
+msgstr "變更交替磁柱數量"
-#: disk-utils/mkfs.c:46
-#, c-format
-msgid " <size> number of blocks to be used on the device\n"
-msgstr ""
+#: disk-utils/fdisk-menu.c:193
+#, fuzzy
+msgid "change number of extra sectors per cylinder"
+msgstr "變更額外磁區數量各磁柱"
-#: disk-utils/mkfs.c:47
-#, c-format
-msgid ""
-" -V, --verbose explain what is being done;\n"
-" specifying -V more than once will cause a dry-run\n"
-msgstr ""
+#: disk-utils/fdisk-menu.c:194
+#, fuzzy
+msgid "change interleave factor"
+msgstr "變更交插因子"
-#: disk-utils/mkfs.c:49
-#, fuzzy, c-format
-msgid ""
-" -V, --version display version information and exit;\n"
-" -V as --version must be the only option\n"
-msgstr ""
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#: disk-utils/fdisk-menu.c:195
+#, fuzzy
+msgid "change rotation speed (rpm)"
+msgstr "變更轉速 (rpm)"
-#: disk-utils/mkfs.c:51
-#, fuzzy, c-format
-msgid " -h, --help display this help text and exit\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+#: disk-utils/fdisk-menu.c:196
+#, fuzzy
+msgid "change number of physical cylinders"
+msgstr "變更實體磁柱數量"
-#: disk-utils/mkfs.c:53
-#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see mkfs(8).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 mkfs (8)。\n"
+#: disk-utils/fdisk-menu.c:205
+#, fuzzy
+msgid "SGI"
+msgstr "SGI raw"
-#: disk-utils/mkfs.cramfs.c:122
-#, c-format
-msgid ""
-"usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n "
-"name] dirname outfile\n"
-" -h print this help\n"
-" -v be verbose\n"
-" -E make all warnings errors (non-zero exit status)\n"
-" -b blksize use this blocksize, must equal page size\n"
-" -e edition set edition number (part of fsid)\n"
-" -N endian set cramfs endianness (big|little|host), default host\n"
-" -i file insert a file image into the filesystem (requires >= 2.4.0)\n"
-" -n name set name of cramfs filesystem\n"
-" -p pad by %d bytes for boot code\n"
-" -s sort directory entries (old option, ignored)\n"
-" -z make explicit holes (requires >= 2.3.39)\n"
-" dirname root of the filesystem to be compressed\n"
-" outfile output file\n"
-msgstr ""
-"用法：%s [-h] [-v] [-b 區塊大小] [-e 編次] [-N 尾序] [-i 檔案] [-n 名稱] "
-"dirname outfile\n"
-" -h 印出這個說明\n"
-" -v 詳細訊息\n"
-" -E 所有警告視為錯誤 (非零結束狀態)\n"
-" -b 區塊大小 使用這個區塊大小，必須等於頁面大小\n"
-" -e 編次 設定編次數字 (部分的 fsid)\n"
-" -N 尾序 設定 cramfs 尾序 (大|小|主機)，預設依主機\n"
-" -i 檔案 插入檔案影像到檔案系統 (需求 >= 2.4.0)\n"
-" -n 名稱 設定 cramfs 檔案系統的名稱\n"
-" -p 填充 %d 位元組於開機碼\n"
-" -s 排序目錄項目 (舊選項，忽略)\n"
-" -z 製作明確的空洞 (需求 >= 2.3.39)\n"
-" dirname 壓縮的檔案系統根目錄\n"
-" outfile 輸出檔案\n"
-
-#: disk-utils/mkfs.cramfs.c:155
-#, fuzzy, c-format
-msgid "readlink failed: %s"
-msgstr "讀取失敗：%s"
+#: disk-utils/fdisk-menu.c:206
+#, fuzzy
+msgid "select bootable partition"
+msgstr "選取可開機的分割"
-#: disk-utils/mkfs.cramfs.c:301
-#, fuzzy, c-format
-msgid "could not read directory %s"
-msgstr "ç\84¡æ³\95è®\80å\8f\96ç\9b®é\8c\84 %s"
+#: disk-utils/fdisk-menu.c:207
+#, fuzzy
+msgid "edit bootfile entry"
+msgstr "編輯 bootfile æ¢\9dç\9b®"
-#: disk-utils/mkfs.cramfs.c:326
-#, fuzzy, c-format
-msgid ""
-"Very long (%zu bytes) filename `%s' found.\n"
-" Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting."
+#: disk-utils/fdisk-menu.c:208
+#, fuzzy
+msgid "select sgi swap partition"
+msgstr "選取 sgi 交換分割區"
+
+#: disk-utils/fdisk-menu.c:209
+msgid "create SGI info"
msgstr ""
-"很長 (%zu 位元組) 檔名『%s』找到。\n"
-" 請增加 MAX_INPUT_NAMELEN 在中 mkcramfs.c 和重新編譯。 離開。"
-#: disk-utils/mkfs.cramfs.c:448
+#: disk-utils/fdisk-menu.c:218
#, fuzzy
-msgid "filesystem too big. Exiting."
-msgstr "檔案系統太大。 離開。"
+msgid "DOS (MBR)"
+msgstr "DOS R/O"
-#: disk-utils/mkfs.cramfs.c:607
-#, c-format
-msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
-msgstr "AIEEE：區塊「被壓縮」到 > 2*區塊長度 (%ld)\n"
+#: disk-utils/fdisk-menu.c:219
+#, fuzzy
+msgid "toggle a bootable flag"
+msgstr "切換可開機的旗標"
-#: disk-utils/mkfs.cramfs.c:626
-#, c-format
-msgid "%6.2f%% (%+ld bytes)\t%s\n"
-msgstr "%6.2f%% (%+ld 位元組)\t%s\n"
+#: disk-utils/fdisk-menu.c:220
+#, fuzzy
+msgid "edit nested BSD disklabel"
+msgstr "編輯 bsd disklabel"
-#: disk-utils/mkfs.cramfs.c:671
-#, fuzzy, c-format
-msgid "cannot close file %s"
-msgstr "無法關閉檔案 %s"
+#: disk-utils/fdisk-menu.c:221
+#, fuzzy
+msgid "toggle the dos compatibility flag"
+msgstr "切換 DOS 相容性旗標"
-#: disk-utils/mkfs.cramfs.c:732
+#: disk-utils/fdisk-menu.c:223
#, fuzzy
-msgid "invalid blocksize argument"
-msgstr "ç\84¡æ\95\88ç\9a\84å\8d\80å¡\8a大å°\8få¼\95æ\95¸"
+msgid "move beginning of data in a partition"
+msgstr "移å\8b\95èµ·å§\8bé\83¨å\88\86ç\9a\84è³\87æ\96\99å\9c¨ä¸å\88\86å\89²"
-#: disk-utils/mkfs.cramfs.c:738
+#: disk-utils/fdisk-menu.c:224
#, fuzzy
-msgid "invalid edition number argument"
-msgstr "無效的分割區編號引數"
+msgid "fix partitions C/H/S values"
+msgstr "修正分割排序"
-#: disk-utils/mkfs.cramfs.c:748
+#: disk-utils/fdisk-menu.c:225
#, fuzzy
-msgid "invalid endianness given; must be 'big', 'little', or 'host'"
-msgstr "無效的尾序給定的。必須是『大』，『小型』，或『主機』"
+msgid "change the disk identifier"
+msgstr "變更磁碟識別碼"
-#: disk-utils/mkfs.cramfs.c:809
-#, fuzzy, c-format
-msgid ""
-"warning: guestimate of required size (upper bound) is %lldMB, but maximum "
-"image size is %uMB. We might die prematurely."
-msgstr ""
-"警告：guestimate 的必要項大小 (上限) 是 %lldMB，但是最大值影像大小是 %uMB。 "
-"我們也許消滅過早。"
+#: disk-utils/fdisk-menu.c:237
+#, fuzzy
+msgid "BSD"
+msgstr "BSD/OS"
-#: disk-utils/mkfs.cramfs.c:833
-msgid "ROM image map"
-msgstr "唯讀記憶體圖像映射"
+#: disk-utils/fdisk-menu.c:238
+#, fuzzy
+msgid "edit drive data"
+msgstr "編輯推動資料"
-#: disk-utils/mkfs.cramfs.c:845
-#, c-format
-msgid "Including: %s\n"
-msgstr "å\8c\85å\90«ï¼\9a%s\n"
+#: disk-utils/fdisk-menu.c:239
+#, fuzzy
+msgid "install bootstrap"
+msgstr "å®\89è£\9då\95\9få\8b\95ç¨\8bå¼\8f"
-#: disk-utils/mkfs.cramfs.c:851
-#, c-format
-msgid "Directory data: %zd bytes\n"
-msgstr "目錄資料：%zd 位元組\n"
+#: disk-utils/fdisk-menu.c:240
+#, fuzzy
+msgid "show complete disklabel"
+msgstr "顯示完成 disklabel"
-#: disk-utils/mkfs.cramfs.c:859
-#, c-format
-msgid "Everything: %zd kilobytes\n"
-msgstr "所有東西：%zd 千位元組\n"
+#: disk-utils/fdisk-menu.c:241
+#, fuzzy
+msgid "link BSD partition to non-BSD partition"
+msgstr "鏈結 BSD 分割到 non-BSD 分割"
-#: disk-utils/mkfs.cramfs.c:864
+#: disk-utils/fdisk-menu.c:373
#, c-format
-msgid "Super block: %zd bytes\n"
-msgstr "超區塊：%zd 位元組\n"
+msgid ""
+"\n"
+"Help (expert commands):\n"
+msgstr ""
+
+#: disk-utils/fdisk-menu.c:375 disk-utils/sfdisk.c:1472
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Help:\n"
+msgstr "求助"
-#: disk-utils/mkfs.cramfs.c:871
+#: disk-utils/fdisk-menu.c:395
#, c-format
-msgid "CRC: %x\n"
-msgstr "CRC：%x\n"
+msgid "You're editing nested '%s' partition table, primary partition table is '%s'."
+msgstr ""
-#: disk-utils/mkfs.cramfs.c:876
-#, fuzzy, c-format
-msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
-msgstr "不足空格配置的用於唯讀記憶體影像 (%lld 配置，%zu 使用)"
+#: disk-utils/fdisk-menu.c:425
+msgid "Expert command (m for help): "
+msgstr "專家命令 (m 以獲得說明)："
-#: disk-utils/mkfs.cramfs.c:882
-#, fuzzy, c-format
-msgid "ROM image write failed (%zd %zd)"
-msgstr "唯讀記憶體影像寫入失敗 (%zd %zd)"
+#: disk-utils/fdisk-menu.c:427
+msgid "Command (m for help): "
+msgstr "命令 (m 以獲得說明)："
-#: disk-utils/mkfs.cramfs.c:885
-msgid "ROM image"
-msgstr "唯讀記憶體映像"
+#: disk-utils/fdisk-menu.c:439
+msgid ""
+"\n"
+"All unwritten changes will be lost, do you really want to quit? (y/n)"
+msgstr ""
+
+#: disk-utils/fdisk-menu.c:452
+#, fuzzy, c-format
+msgid "%c: unknown command"
+msgstr "%c: 不明的命令\n"
-#: disk-utils/mkfs.cramfs.c:894
+#: disk-utils/fdisk-menu.c:477 disk-utils/fdisk-menu.c:510
#, fuzzy
-msgid "warning: filenames truncated to 255 bytes."
-msgstr "警告：檔名截短至 255 位元組。"
+msgid "Enter script file name"
+msgstr "無法寫入指令稿檔案"
+
+#: disk-utils/fdisk-menu.c:489
+msgid "Resetting fdisk!"
+msgstr ""
-#: disk-utils/mkfs.cramfs.c:896
+#: disk-utils/fdisk-menu.c:496
+msgid "Script successfully applied."
+msgstr ""
+
+#: disk-utils/fdisk-menu.c:522
#, fuzzy
-msgid "warning: files were skipped due to errors."
-msgstr "警告：檔案被略過由於錯誤。"
+msgid "Failed to transform disk layout into script"
+msgstr "加入輸出列時失敗"
-#: disk-utils/mkfs.cramfs.c:898
-#, fuzzy, c-format
-msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
-msgstr "警告：檔案大小截短至 %luMB (minus 1 位元組)。"
+#: disk-utils/fdisk-menu.c:536
+msgid "Script successfully saved."
+msgstr ""
-#: disk-utils/mkfs.cramfs.c:902
+#: disk-utils/fdisk-menu.c:559 disk-utils/sfdisk.c:1698
#, fuzzy, c-format
-msgid "warning: uids truncated to %u bits. (This may be a security concern.)"
-msgstr "警告：uids 截短至 %u 位元。 (這也許會是安全上的考量.)"
+msgid "Partition #%zu contains a %s signature."
+msgstr "警告：分割區 %d 含有磁區 0\n"
-#: disk-utils/mkfs.cramfs.c:905
-#, fuzzy, c-format
-msgid "warning: gids truncated to %u bits. (This may be a security concern.)"
-msgstr "警告：gids 截短至 %u 位元。 (這也許會是安全上的考量.)"
+#: disk-utils/fdisk-menu.c:562 disk-utils/sfdisk.c:1701
+#, fuzzy
+msgid "Do you want to remove the signature?"
+msgstr "您要將這個寫入磁碟嗎？[ynq] "
-#: disk-utils/mkfs.cramfs.c:908
-#, fuzzy, c-format
-msgid ""
-"WARNING: device numbers truncated to %u bits. This almost certainly means\n"
-"that some device files will be wrong."
+#: disk-utils/fdisk-menu.c:567 disk-utils/sfdisk.c:1706
+msgid "The signature will be removed by a write command."
msgstr ""
-"警告：裝置編號截短至 %u 位元。 這個幾乎某些表示\n"
-"該某些裝置檔案將是錯誤的。"
-#: disk-utils/mkfs.minix.c:149
+#: disk-utils/fdisk-menu.c:600
+#, fuzzy
+msgid "failed to write disklabel"
+msgstr "%s：無法寫入標籤"
+
+#: disk-utils/fdisk-menu.c:659
#, fuzzy, c-format
-msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
-msgstr "用法：%s [-c|-l 檔名] [-nXX] [-iXX]/dev/名稱 [區塊]"
+msgid "Could not delete partition %zu"
+msgstr "已選分割區 %d\n"
-#: disk-utils/mkfs.minix.c:171
-#, c-format
-msgid "%s is mounted; will not make a filesystem here!"
-msgstr "%s 已掛載；在此將無法製作檔案系統！"
+#: disk-utils/fdisk-menu.c:688
+#, fuzzy
+msgid "Changing display/entry units to cylinders (DEPRECATED!)."
+msgstr "變更顯示/輸入單位為磁柱 (不宜再用！)\n"
-#: disk-utils/mkfs.minix.c:197
-#, fuzzy, c-format
-msgid "%s: seek to boot block failed in write_tables"
-msgstr "%s：尋指到啟動區段失敗 在中 writetables(_T)"
+#: disk-utils/fdisk-menu.c:690
+#, fuzzy
+msgid "Changing display/entry units to sectors."
+msgstr "變更顯示/輸入單位為磁區\n"
-#: disk-utils/mkfs.minix.c:200
-#, fuzzy, c-format
-msgid "%s: unable to clear boot sector"
-msgstr "%s：無法清空開機磁區"
+#: disk-utils/fdisk-menu.c:700 disk-utils/fdisk-menu.c:871
+#, fuzzy
+msgid "Leaving nested disklabel."
+msgstr "編輯 bsd disklabel"
-#: disk-utils/mkfs.minix.c:202
-#, fuzzy, c-format
-msgid "%s: seek failed in write_tables"
-msgstr "%s：尋指失敗的在中 writetables(_T)"
+#: disk-utils/fdisk-menu.c:737
+msgid "New maximum entries"
+msgstr ""
-#: disk-utils/mkfs.minix.c:205
-#, fuzzy, c-format
-msgid "%s: unable to write super-block"
-msgstr "%s：無法寫入超區塊"
+#: disk-utils/fdisk-menu.c:748
+msgid "Entering protective/hybrid MBR disklabel."
+msgstr ""
-#: disk-utils/mkfs.minix.c:208
-#, fuzzy, c-format
-msgid "%s: unable to write inode map"
-msgstr "%s：無法寫入 inode 映射"
+#: disk-utils/fdisk-menu.c:764
+msgid "New UUID (in 8-4-4-4-12 format)"
+msgstr ""
-#: disk-utils/mkfs.minix.c:211
-#, fuzzy, c-format
-msgid "%s: unable to write zone map"
-msgstr "%s：無法寫入區映射"
+#: disk-utils/fdisk-menu.c:779
+#, fuzzy
+msgid "New name"
+msgstr "使用者名稱"
-#: disk-utils/mkfs.minix.c:214
-#, fuzzy, c-format
-msgid "%s: unable to write inodes"
-msgstr "%s：無法寫入 inodes"
+#: disk-utils/fdisk-menu.c:842
+#, fuzzy
+msgid "Entering nested BSD disklabel."
+msgstr "建立新的 Sun disklabel。\n"
-#: disk-utils/mkfs.minix.c:219
-#, fuzzy, c-format
-msgid "%s: seek failed in write_block"
-msgstr "%s：尋指失敗的在中 writeblock(_B)"
+#: disk-utils/fdisk-menu.c:878
+msgid "C/H/S values fixed."
+msgstr ""
-#: disk-utils/mkfs.minix.c:222
-#, fuzzy, c-format
-msgid "%s: write failed in write_block"
-msgstr "%s：寫入失敗的在中 writeblock(_B)"
+#: disk-utils/fdisk-menu.c:880
+#, fuzzy
+msgid "Nothing to do. C/H/S values are correct already."
+msgstr ""
+"無事可做。順序已經是正確的。\n"
+"\n"
-#: disk-utils/mkfs.minix.c:231 disk-utils/mkfs.minix.c:306
-#: disk-utils/mkfs.minix.c:355
-#, fuzzy, c-format
-msgid "%s: too many bad blocks"
-msgstr "%s：太多不當的區塊"
+#: disk-utils/fdisk-menu.c:1047
+msgid "Number of cylinders"
+msgstr "磁柱數量"
-#: disk-utils/mkfs.minix.c:239
-#, fuzzy, c-format
-msgid "%s: not enough good blocks"
-msgstr "%s：不足良好區塊"
+#: disk-utils/fdisk-menu.c:1054
+msgid "Number of heads"
+msgstr "磁頭數量"
-#: disk-utils/mkfs.minix.c:485
-#, fuzzy, c-format
-msgid "%s: unable to allocate buffer for superblock"
-msgstr "%s：無法 alloc 緩衝區用於超區塊"
+#: disk-utils/fdisk-menu.c:1060
+msgid "Number of sectors"
+msgstr "磁區數量"
-#: disk-utils/mkfs.minix.c:531
+#: disk-utils/fdisk-menu.c:1111
#, fuzzy, c-format
-msgid "%s: unable to allocate buffers for maps"
-msgstr "%s：無法配置緩衝區用於映射"
+msgid "Failed to create '%s' disk label"
+msgstr "建立新的清空 Sun disklabel"
-#: disk-utils/mkfs.minix.c:541
+#: disk-utils/fsck.c:214
#, fuzzy, c-format
-msgid "%s: unable to allocate buffer for inodes"
-msgstr "%s：無法配置緩衝區用於 inodes"
+msgid "%s is mounted\n"
+msgstr "%s 被掛載\n"
-#: disk-utils/mkfs.minix.c:544
+#: disk-utils/fsck.c:216
#, fuzzy, c-format
-msgid "%lu inodes\n"
-msgstr "%lu inodes\n"
+msgid "%s is not mounted\n"
+msgstr "%s 未被掛載\n"
-#: disk-utils/mkfs.minix.c:545
+#: disk-utils/fsck.c:330 disk-utils/fsck.cramfs.c:179
+#: disk-utils/fsck.cramfs.c:186 disk-utils/fsck.cramfs.c:242
+#: disk-utils/fsck.cramfs.c:263 disk-utils/sfdisk.c:308 libfdisk/src/bsd.c:647
+#: login-utils/last.c:215 login-utils/last.c:252 login-utils/sulogin.c:721
+#: misc-utils/hardlink.c:840 schedutils/uclampset.c:111
+#: sys-utils/ctrlaltdel.c:44 sys-utils/irq-common.c:269 sys-utils/rfkill.c:216
+#: sys-utils/setpriv.c:265 term-utils/setterm.c:746 term-utils/setterm.c:802
+#: term-utils/setterm.c:806 term-utils/setterm.c:813
#, fuzzy, c-format
-msgid "%lu blocks\n"
-msgstr "%lu 區塊\n"
+msgid "cannot read %s"
+msgstr "無法讀取 %s"
+
+#: disk-utils/fsck.c:332 login-utils/utmpdump.c:288
+#, c-format
+msgid "parse error: %s"
+msgstr "剖析錯誤：%s"
-#: disk-utils/mkfs.minix.c:547
+#: disk-utils/fsck.c:359
#, fuzzy, c-format
-msgid "Zonesize=%zu\n"
-msgstr "區域大小=%d\n"
+msgid "cannot create directory %s"
+msgstr "無法變更目錄到 %s"
-#: disk-utils/mkfs.minix.c:548
+#: disk-utils/fsck.c:372
#, fuzzy, c-format
-msgid ""
-"Maxsize=%zu\n"
-"\n"
-msgstr ""
-"最大容量=%ld\n"
-"\n"
+msgid "Locking disk by %s ... "
+msgstr "鎖定磁碟 %s…"
-#: disk-utils/mkfs.minix.c:561
+#: disk-utils/fsck.c:383
#, fuzzy, c-format
-msgid "%s: seek failed during testing of blocks"
-msgstr "%s：尋指失敗的在的期間測試的區塊"
+msgid "(waiting) "
+msgstr "(等待) "
-#: disk-utils/mkfs.minix.c:568
-#, c-format
-msgid "Weird values in do_check: probably bugs\n"
-msgstr "do_check 中出現異常值：可能錯誤\n"
+#. TRANSLATORS: These are followups to "Locking disk...".
+#: disk-utils/fsck.c:393
+#, fuzzy
+msgid "succeeded"
+msgstr "成功"
-#: disk-utils/mkfs.minix.c:601
-#, fuzzy, c-format
-msgid "%s: seek failed in check_blocks"
-msgstr "%s：尋指失敗的在中 checkblocks(_B)"
+#: disk-utils/fsck.c:393
+#, fuzzy
+msgid "failed"
+msgstr "失敗"
-#: disk-utils/mkfs.minix.c:611
+#: disk-utils/fsck.c:410
#, fuzzy, c-format
-msgid "%s: bad blocks before data-area: cannot make fs"
-msgstr "%s：不當的區塊之前 data-area：無法製作 fs"
-
-#: disk-utils/mkfs.minix.c:618 disk-utils/mkfs.minix.c:644
-#, c-format
-msgid "%d bad blocks\n"
-msgstr "%d 個不良區塊\n"
-
-#: disk-utils/mkfs.minix.c:620 disk-utils/mkfs.minix.c:646
-#, c-format
-msgid "one bad block\n"
-msgstr "一個不良區塊\n"
+msgid "Unlocking %s.\n"
+msgstr "正在使用 %s。\n"
-#: disk-utils/mkfs.minix.c:629
+#: disk-utils/fsck.c:441
#, fuzzy, c-format
-msgid "%s: can't open file of bad blocks"
-msgstr "%s：無法開啟檔案的不當的區塊"
+msgid "failed to setup description for %s"
+msgstr "設定描述用於 %s 時失敗"
-#: disk-utils/mkfs.minix.c:634
-#, c-format
-msgid "badblock number input error on line %d\n"
-msgstr "損壞區塊編號輸入錯誤於第 %d 列\n"
+#: disk-utils/fsck.c:471 misc-utils/findmnt.c:897 misc-utils/lsblk-mnt.c:15
+#: sys-utils/mount.c:100 sys-utils/swapon-common.c:19 sys-utils/umount.c:52
+#, fuzzy, c-format
+msgid "%s: parse error at line %d -- ignored"
+msgstr "%s：剖析錯誤於列 %d -- 忽略"
-#: disk-utils/mkfs.minix.c:635
+#: disk-utils/fsck.c:503 disk-utils/fsck.c:505
#, fuzzy, c-format
-msgid "%s: cannot read badblocks file"
-msgstr "%s：無法讀取 badblocks 檔案"
+msgid "%s: failed to parse fstab"
+msgstr "%s：無法剖析 fstab"
-#: disk-utils/mkfs.minix.c:668
-#, c-format
-msgid "%s (%s)\n"
-msgstr "%s (%s)\n"
+#: disk-utils/fsck.c:690 login-utils/login.c:1119 login-utils/sulogin.c:1112
+#: login-utils/vipw.c:200 sys-utils/flock.c:351 sys-utils/nsenter.c:207
+#: sys-utils/swapon.c:332 sys-utils/unshare.c:298 sys-utils/unshare.c:626
+#: sys-utils/unshare.c:962
+msgid "fork failed"
+msgstr "衍生執行時失敗"
-#: disk-utils/mkfs.minix.c:673 disk-utils/mkfs.minix.c:675
+#: disk-utils/fsck.c:697
#, fuzzy, c-format
-msgid "%s: bad inode size"
-msgstr "%s：不當的 inode 大小"
+msgid "%s: execute failed"
+msgstr "%s：執行失敗"
-#: disk-utils/mkfs.minix.c:684
+#: disk-utils/fsck.c:787
#, fuzzy
-msgid "failed to parse number of inodes"
-msgstr "剖析列號的時失敗"
+msgid "wait: no more child process?!?"
+msgstr "等待：已無更多子行程 ?!?"
-#: disk-utils/mkfs.minix.c:690
-#, fuzzy
-msgid "failed to parse maximum length of filenames"
-msgstr "剖析列號的時失敗"
+#: disk-utils/fsck.c:790 sys-utils/flock.c:369 sys-utils/swapon.c:359
+#: sys-utils/unshare.c:248 sys-utils/unshare.c:986
+msgid "waitpid failed"
+msgstr "waitpid 失敗"
-#: disk-utils/mkfs.minix.c:723
-#, fuzzy
-msgid "failed to parse number of blocks"
-msgstr "剖析列號的時失敗"
+#: disk-utils/fsck.c:808
+#, fuzzy, c-format
+msgid "Warning... %s for device %s exited with signal %d."
+msgstr "警告…%s 用於裝置 %s 離開的與信號 %d。"
-#: disk-utils/mkfs.minix.c:766
+#: disk-utils/fsck.c:814
#, fuzzy, c-format
-msgid "%s: device is misaligned"
-msgstr "%s：裝置被 misaligned"
+msgid "%s %s: status is %x, should never happen."
+msgstr "%s %s：狀態是 %x，應該永不發生。"
-#: disk-utils/mkfs.minix.c:769
+#: disk-utils/fsck.c:860
#, c-format
-msgid "block size smaller than physical sector size of %s"
-msgstr "區段大小小於 %s 的實體磁區大小"
+msgid "Finished with %s (exit status %d)\n"
+msgstr "以 %s 完成 (離開狀態 %d)\n"
-#: disk-utils/mkfs.minix.c:773
-#, c-format
-msgid "cannot determine size of %s"
-msgstr "無法決定 %s 的大小"
+#: disk-utils/fsck.c:941
+#, fuzzy, c-format
+msgid "error %d (%s) while executing fsck.%s for %s"
+msgstr "%d 當執行 fsck 時發生錯誤.%s 用於 %s"
-#: disk-utils/mkfs.minix.c:782
-#, c-format
-msgid "will not try to make filesystem on '%s'"
-msgstr "將不會試著於「%s」製作檔案系統"
+#: disk-utils/fsck.c:1007
+#, fuzzy
+msgid ""
+"Either all or none of the filesystem types passed to -t must be prefixed\n"
+"with 'no' or '!'."
+msgstr ""
+"還是所有或沒有任何檔案系統類型傳遞到 -t 必須被前綴\n"
+"與『沒有』或『！』。"
-#: disk-utils/mkfs.minix.c:784
+#: disk-utils/fsck.c:1123
#, fuzzy, c-format
-msgid "%s: number of blocks too small"
-msgstr "%s：區塊數量太小"
+msgid "%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
+msgstr "%s：跳過不當的列在中/etc/fstab：繫結掛載與非零值 fsck 傳送號碼"
-#: disk-utils/mkswap.c:162
-#, fuzzy, c-format
-msgid "Bad user-specified page size %u"
-msgstr "不當的使用者指定的頁面大小 %u"
+#: disk-utils/fsck.c:1135
+#, c-format
+msgid "%s: skipping nonexistent device\n"
+msgstr "%s：跳過不存在的裝置\n"
-#: disk-utils/mkswap.c:168
+#: disk-utils/fsck.c:1140
#, fuzzy, c-format
-msgid "Using user-specified page size %d, instead of the system value %d"
-msgstr "使用使用者指定的頁面大小 %d，以代替系統值 %d"
+msgid "%s: nonexistent device (\"nofail\" fstab option may be used to skip this device)\n"
+msgstr "%s：不存在的裝置 (「nofail」fstab 選項也許會被用來跳過這個裝置)\n"
-#: disk-utils/mkswap.c:191
-#, fuzzy
-msgid "Bad swap header size, no label written."
-msgstr "不當的交換頁首大小，沒有標貼手寫的。"
+#: disk-utils/fsck.c:1157
+#, fuzzy, c-format
+msgid "%s: skipping unknown filesystem type\n"
+msgstr "%s：跳過不明檔案系統型態\n"
-#: disk-utils/mkswap.c:201
-#, fuzzy
-msgid "Label was truncated."
-msgstr "標貼被截斷。"
+#: disk-utils/fsck.c:1171
+#, fuzzy, c-format
+msgid "cannot check %s: fsck.%s not found"
+msgstr "無法檢查 %s：fsck.not 找到 %s "
-#: disk-utils/mkswap.c:207
-#, c-format
-msgid "no label, "
-msgstr "無標籤，"
+#: disk-utils/fsck.c:1275
+msgid "Checking all file systems.\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/mkswap.c:215
+#: disk-utils/fsck.c:1366
#, c-format
-msgid "no uuid\n"
-msgstr "沒有 uuid\n"
+msgid "--waiting-- (pass %d)\n"
+msgstr "--等待-- (通過 %d)\n"
-#: disk-utils/mkswap.c:280
+#: disk-utils/fsck.c:1392
#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] device [size]\n"
+msgid " %s [options] -- [fs-options] [<filesystem> ...]\n"
msgstr ""
"\n"
"用法：\n"
-" %s [選項] 裝置 [大小]\n"
-
-#: disk-utils/mkswap.c:285
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -c, --check check bad blocks before creating the swap area\n"
-" -f, --force allow swap size area be larger than device\n"
-" -p, --pagesize SIZE specify page size in bytes\n"
-" -L, --label LABEL specify label\n"
-" -v, --swapversion NUM specify swap-space version number\n"
-" -U, --uuid UUID specify the uuid to use\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -c, --check 檢查不當的區塊之前建立交換區域\n"
-" -f, --force 允許交換大小區域是大於裝置\n"
-" -p, --pagesize 大小 指定頁面大小在中位元組\n"
-" -L, --label 標貼 指定標貼\n"
-" -v, --swapversion NUM 指定交換空間版本編號\n"
-" -U, --uuid UUID 指定 uuid 以使用\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+" %s [fsck-options] [fs-options] [filesys...]\n"
-#: disk-utils/mkswap.c:304
-msgid "too many bad pages"
-msgstr "太多不良頁面"
+#: disk-utils/fsck.c:1396
+#, fuzzy
+msgid "Check and repair a Linux filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/mkswap.c:324
-msgid "seek failed in check_blocks"
-msgstr "在 check_blocks 中的尋找失敗"
+#: disk-utils/fsck.c:1399
+#, fuzzy
+msgid " -A check all filesystems\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/mkswap.c:332
-#, fuzzy, c-format
-msgid "%lu bad page\n"
-msgid_plural "%lu bad pages\n"
-msgstr[0] "%lu 個不良頁面\n"
+#: disk-utils/fsck.c:1400
+msgid " -C [<fd>] display progress bar; file descriptor is for GUIs\n"
+msgstr ""
-#: disk-utils/mkswap.c:361
-msgid "unable to alloc new libblkid probe"
-msgstr "無法配置新的 libblkid 探針"
+#: disk-utils/fsck.c:1401
+msgid " -l lock the device to guarantee exclusive access\n"
+msgstr ""
-#: disk-utils/mkswap.c:363
-msgid "unable to assign device to libblkid probe"
-msgstr "無法指派裝置給 libblkid 探針"
+#: disk-utils/fsck.c:1402
+#, fuzzy
+msgid " -M do not check mounted filesystems\n"
+msgstr " t 變更檔案系統的類型"
-#: disk-utils/mkswap.c:378 disk-utils/mkswap.c:405 disk-utils/mkswap.c:621
-msgid "unable to rewind swap-device"
-msgstr "無法倒轉交換裝置"
+#: disk-utils/fsck.c:1403
+msgid " -N do not execute, just show what would be done\n"
+msgstr ""
-#: disk-utils/mkswap.c:409
-msgid "unable to erase bootbits sectors"
-msgstr "無法清除開機磁區"
+#: disk-utils/fsck.c:1404
+msgid " -P check filesystems in parallel, including root\n"
+msgstr ""
-#: disk-utils/mkswap.c:423
-#, c-format
-msgid "%s: warning: wiping old %s signature."
+#: disk-utils/fsck.c:1405
+msgid " -R skip root filesystem; useful only with '-A'\n"
msgstr ""
-#: disk-utils/mkswap.c:428
-#, fuzzy, c-format
-msgid "%s: warning: don't erase bootbits sectors"
-msgstr "%s：警告：不清除 bootbits 磁區"
+#: disk-utils/fsck.c:1406
+#, fuzzy
+msgid ""
+" -r [<fd>] report statistics for each device checked;\n"
+" file descriptor is for GUIs\n"
+msgstr " -l [或 --list]： 列出每個裝置的分割區"
-#: disk-utils/mkswap.c:431
-#, c-format
-msgid " (%s partition table detected). "
-msgstr " (偵測到 %s 分割表)。"
+#: disk-utils/fsck.c:1408
+#, fuzzy
+msgid " -s serialize the checking operations\n"
+msgstr " d 刪除目前的分割區"
-#: disk-utils/mkswap.c:433
-#, c-format
-msgid " (compiled without libblkid). "
-msgstr " (編譯時未支援 libblkid)。"
+#: disk-utils/fsck.c:1409
+#, fuzzy
+msgid " -T do not show the title on startup\n"
+msgstr " -f 不分割長列\n"
-#: disk-utils/mkswap.c:434
-#, fuzzy, c-format
-msgid "Use -f to force.\n"
-msgstr " -f 強制檢查\n"
+#: disk-utils/fsck.c:1410
+msgid ""
+" -t <type> specify filesystem types to be checked;\n"
+" <type> is allowed to be a comma-separated list\n"
+msgstr ""
-#: disk-utils/mkswap.c:485
+#: disk-utils/fsck.c:1412
#, fuzzy
-msgid "parsing page size failed"
-msgstr "剖析頁面大小失敗"
+msgid " -V explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: disk-utils/mkswap.c:491
-#, fuzzy
-msgid "parsing version number failed"
-msgstr "剖析版本編號失敗"
+#: disk-utils/fsck.c:1418
+msgid "See the specific fsck.* commands for available fs-options."
+msgstr ""
-#: disk-utils/mkswap.c:497
-#, fuzzy, c-format
-msgid "warning: ignoring -U (UUIDs are unsupported by %s)"
-msgstr "警告：忽略 -U (UUIDs 被不受支援的由 %s)"
+#: disk-utils/fsck.c:1463
+#, fuzzy
+msgid "too many devices"
+msgstr "太多裝置"
-#: disk-utils/mkswap.c:515
-msgid "only one device argument is currently supported"
-msgstr ""
+#: disk-utils/fsck.c:1475
+#, fuzzy
+msgid "Is /proc mounted?"
+msgstr "是/proc 掛載？"
-#: disk-utils/mkswap.c:521
+#: disk-utils/fsck.c:1483
#, fuzzy, c-format
-msgid "swapspace version %d is not supported"
-msgstr "速度 %d 不受支援"
+msgid "must be root to scan for matching filesystems: %s"
+msgstr "必須是根到掃描用於匹配檔案系統：%s"
-#: disk-utils/mkswap.c:526
-#, fuzzy
-msgid "error: parsing UUID failed"
-msgstr "錯誤：UUID 剖析失敗"
+#: disk-utils/fsck.c:1487
+#, fuzzy, c-format
+msgid "couldn't find matching filesystem: %s"
+msgstr "找不到匹配檔案系統：%s"
-#: disk-utils/mkswap.c:535
+#: disk-utils/fsck.c:1495 disk-utils/fsck.c:1592 misc-utils/kill.c:286
+#: sys-utils/eject.c:281
#, fuzzy
-msgid "error: Nowhere to set up swap on?"
-msgstr "錯誤：無處可設置交換於？"
+msgid "too many arguments"
+msgstr "太多引數"
-#: disk-utils/mkswap.c:541
+#: disk-utils/fsck.c:1550 disk-utils/fsck.c:1553
#, fuzzy
-msgid "invalid block count argument"
-msgstr "ç\84¡æ\95\88ç\9a\84å\8d\80å¡\8aè¨\88æ\95¸å¼\95æ\95¸"
+msgid "invalid argument of -r"
+msgstr "ç\84¡æ\95\88ç\9a\84å¼\95æ\95¸ï¼\9a%s"
-#: disk-utils/mkswap.c:549
+#: disk-utils/fsck.c:1565
#, fuzzy, c-format
-msgid "error: size %llu KiB is larger than device size %llu KiB"
-msgstr "é\8c¯èª¤ï¼\9a大å°\8f %llu KiB æ\98¯å¤§æ\96¼è£\9d置大å°\8f %llu KiB"
+msgid "option '%s' may be specified only once"
+msgstr "é\81¸é \85 --pid ä¹\9f許æ\9c\83被æ\8c\87å®\9aç\9a\84å\8fªä¸\80次"
-#: disk-utils/mkswap.c:555
+#: disk-utils/fsck.c:1572 misc-utils/kill.c:336 misc-utils/kill.c:352
#, fuzzy, c-format
-msgid "error: swap area needs to be at least %ld KiB"
-msgstr "錯誤：交換區域需要是至少 %ld KiB"
+msgid "option '%s' requires an argument"
+msgstr "%s 需要一個引數"
-#: disk-utils/mkswap.c:571
+#: disk-utils/fsck.c:1603
#, fuzzy, c-format
-msgid "warning: truncating swap area to %llu KiB"
-msgstr "警告：截斷交換區域到 %llu KiB"
+msgid "invalid argument of -r: %d"
+msgstr "無效的引數：%s"
-#: disk-utils/mkswap.c:576
-#, fuzzy, c-format
-msgid "error: %s is mounted; will not make swapspace"
-msgstr "錯誤：%s 被掛載；將無法製作 swapspace。"
+#: disk-utils/fsck.c:1648
+#, fuzzy
+msgid "the -l option can be used with one device only -- ignore"
+msgstr "-l 選項可以被使用與一個裝置只有 -- 忽略"
-#: disk-utils/mkswap.c:597
+#: disk-utils/fsck.cramfs.c:117
#, fuzzy, c-format
-msgid "warning: %s is misaligned"
-msgstr "警告：%s 被 misaligned"
+msgid " %s [options] <file>\n"
+msgstr " %s [選項] [<file>]\n"
-#: disk-utils/mkswap.c:610
-msgid "Unable to set up swap-space: unreadable"
-msgstr "無法設置交換空間：無法讀取"
+#: disk-utils/fsck.cramfs.c:120
+msgid "Check and repair a compressed ROM filesystem.\n"
+msgstr ""
-#: disk-utils/mkswap.c:613
-#, c-format
-msgid "Setting up swapspace version 1, size = %llu KiB\n"
-msgstr "設定 swapspace 版本 1, 大小 = %llu KiB\n"
+#: disk-utils/fsck.cramfs.c:123
+msgid " -a for compatibility only, ignored\n"
+msgstr ""
-#: disk-utils/mkswap.c:625
-#, fuzzy, c-format
-msgid "%s: unable to write signature page"
-msgstr "%s：無法寫入簽名頁面"
+#: disk-utils/fsck.cramfs.c:124
+#, fuzzy
+msgid " -v, --verbose be more verbose\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: disk-utils/mkswap.c:637
-#, fuzzy, c-format
-msgid "%s: unable to obtain selinux file label"
-msgstr "%s：無法得到 selinux 檔案標貼"
+#: disk-utils/fsck.cramfs.c:125
+msgid " -y for compatibility only, ignored\n"
+msgstr ""
-#: disk-utils/mkswap.c:640
-msgid "unable to matchpathcon()"
-msgstr "無法 matchpathcon()"
+#: disk-utils/fsck.cramfs.c:126
+msgid " -b, --blocksize <size> use this blocksize, defaults to page size\n"
+msgstr ""
-#: disk-utils/mkswap.c:643
-msgid "unable to create new selinux context"
-msgstr "無法建立新的 selinux 相關項目"
+#: disk-utils/fsck.cramfs.c:127
+msgid " --extract[=<dir>] test uncompression, optionally extract into <dir>\n"
+msgstr ""
-#: disk-utils/mkswap.c:645
-msgid "couldn't compute selinux context"
-msgstr "無法計算 selinux 相關項目"
+#: disk-utils/fsck.cramfs.c:167
+#, c-format
+msgid "ioctl failed: unable to determine device size: %s"
+msgstr "ioctl 失敗：無法決定裝置大小：%s"
+
+#: disk-utils/fsck.cramfs.c:172
+#, c-format
+msgid "not a block device or file: %s"
+msgstr "不是區塊裝置或檔案：%s"
+
+#: disk-utils/fsck.cramfs.c:175 disk-utils/fsck.cramfs.c:211
+msgid "file length too short"
+msgstr "檔案長度太短"
-#: disk-utils/mkswap.c:651
+#: disk-utils/fsck.cramfs.c:184 disk-utils/fsck.cramfs.c:239
+#: disk-utils/fsck.cramfs.c:259 libfdisk/src/bsd.c:719 libfdisk/src/bsd.c:901
+#: login-utils/last.c:210 login-utils/last.c:244 sys-utils/fallocate.c:206
#, fuzzy, c-format
-msgid "unable to relabel %s to %s"
-msgstr "無法 relabel %s 到 %s"
+msgid "seek on %s failed"
+msgstr "搜尋失敗"
-#: disk-utils/partx.c:80
-#, fuzzy
-msgid "partition number"
-msgstr "分割區編號"
+#: disk-utils/fsck.cramfs.c:190 disk-utils/fsck.cramfs.c:192
+msgid "superblock magic not found"
+msgstr "找不到超區塊的魔術標記"
-#: disk-utils/partx.c:81
-#, fuzzy
-msgid "start of the partition in sectors"
-msgstr "開始的分割在中磁區"
+#: disk-utils/fsck.cramfs.c:195
+#, fuzzy, c-format
+msgid "cramfs endianness is %s\n"
+msgstr "cramfs 尾序是 %s\n"
-#: disk-utils/partx.c:82
+#: disk-utils/fsck.cramfs.c:196
#, fuzzy
-msgid "end of the partition in sectors"
-msgstr "結束的分割在中磁區"
+msgid "big"
+msgstr "大"
-#: disk-utils/partx.c:83
+#: disk-utils/fsck.cramfs.c:196
#, fuzzy
-msgid "number of sectors"
-msgstr "磁區數量"
+msgid "little"
+msgstr "小型"
-#: disk-utils/partx.c:84
-#, fuzzy
-msgid "human readable size"
-msgstr "人類 readable 大小"
+#: disk-utils/fsck.cramfs.c:200
+msgid "unsupported filesystem features"
+msgstr "不受支援的檔案系統特徵"
-#: disk-utils/partx.c:85
-#, fuzzy
-msgid "partition name"
-msgstr "分割名稱"
+#: disk-utils/fsck.cramfs.c:204
+#, c-format
+msgid "superblock size (%d) too small"
+msgstr "超區塊大小 (%d) 太小"
-#: disk-utils/partx.c:86 misc-utils/findmnt.c:122 misc-utils/lsblk.c:129
-#, fuzzy
-msgid "partition UUID"
-msgstr "分割 UUID"
+#: disk-utils/fsck.cramfs.c:209
+msgid "zero file count"
+msgstr "零個檔案計數"
-#: disk-utils/partx.c:87
+#: disk-utils/fsck.cramfs.c:213
#, fuzzy
-msgid "partition table type (dos, gpt, ...)"
-msgstr "分割表型態 (DOS、gpt，...)"
+msgid "file extends past end of filesystem"
+msgstr "警告：檔案延伸超過檔案系統末端\n"
-#: disk-utils/partx.c:88
+#: disk-utils/fsck.cramfs.c:215
#, fuzzy
-msgid "partition flags"
-msgstr "分割旗標"
+msgid "old cramfs format"
+msgstr "警告：舊的 cramfs 格式\n"
-#: disk-utils/partx.c:89
-#, fuzzy
-msgid "partition type hex or uuid"
-msgstr "分割區類型十六進位或 uuid"
+#: disk-utils/fsck.cramfs.c:224
+msgid "unable to test CRC: old cramfs format"
+msgstr "無法測試循環冗餘檢查：舊的 cramfs 格式"
+
+#: disk-utils/fsck.cramfs.c:244
+#, fuzzy, c-format
+msgid "failed to read %<PRIu32> bytes from file %s"
+msgstr "讀取 typescript 檔案 %s 時失敗"
+
+#: disk-utils/fsck.cramfs.c:282
+msgid "crc error"
+msgstr "循環冗餘檢查錯誤"
-#: disk-utils/partx.c:107 sys-utils/losetup.c:479
+#: disk-utils/fsck.cramfs.c:312 disk-utils/fsck.minix.c:558
+msgid "seek failed"
+msgstr "搜尋失敗"
+
+#: disk-utils/fsck.cramfs.c:316
#, fuzzy
-msgid "failed to initialize loopcxt"
-msgstr "初始化 loopcxt 時失敗"
+msgid "read romfs failed"
+msgstr "fread 失敗"
-#: disk-utils/partx.c:111
-#, fuzzy, c-format
-msgid "%s: failed to find unused loop device"
-msgstr "%s：無法尋找未使用的迴圈裝置"
+#: disk-utils/fsck.cramfs.c:348
+msgid "root inode is not directory"
+msgstr "根 inode 並非目錄"
-#: disk-utils/partx.c:115
+#: disk-utils/fsck.cramfs.c:352
+#, c-format
+msgid "bad root offset (%lu)"
+msgstr "不當的根偏移 (%lu)"
+
+#: disk-utils/fsck.cramfs.c:370
+msgid "data block too large"
+msgstr "資料區塊太大"
+
+#: disk-utils/fsck.cramfs.c:374
#, fuzzy, c-format
-msgid "Trying to use '%s' for the loop device\n"
-msgstr "嘗試使用『%s』用於迴圈裝置\n"
+msgid "decompression error: %s"
+msgstr "解壓縮錯誤 %p(%d)：%s"
-#: disk-utils/partx.c:119
+#: disk-utils/fsck.cramfs.c:400
#, fuzzy, c-format
-msgid "%s: failed to set backing file"
-msgstr "%s：無法設定上一步檔案"
+msgid " hole at %lu (%zu)\n"
+msgstr " 漏洞位於 %ld (%zd)\n"
-#: disk-utils/partx.c:124 sys-utils/mount.c:444
+#: disk-utils/fsck.cramfs.c:407 disk-utils/fsck.cramfs.c:582
#, fuzzy, c-format
-msgid "%s: failed to setup loop device"
-msgstr "%s：無法設定迴圈裝置"
+msgid " uncompressing block at %lu to %lu (%lu)\n"
+msgstr " 解壓縮區塊位於 %ld 到 %ld (%ld)\n"
-#: disk-utils/partx.c:154 misc-utils/findmnt.c:361 misc-utils/lsblk.c:280
-#: misc-utils/lslocks.c:333 sys-utils/losetup.c:102 sys-utils/lscpu.c:275
-#: sys-utils/prlimit.c:270 sys-utils/swapon.c:121 sys-utils/wdctl.c:145
+#: disk-utils/fsck.cramfs.c:414
#, c-format
-msgid "unknown column: %s"
-msgstr "不明直欄：%s"
+msgid "non-block (%ld) bytes"
+msgstr "非區塊 (%ld) 位元組"
-#: disk-utils/partx.c:201
-#, fuzzy, c-format
-msgid "%s: failed to get partition number"
-msgstr "%s：無法提取分割區編號"
+#: disk-utils/fsck.cramfs.c:418
+#, c-format
+msgid "non-size (%ld vs %ld) bytes"
+msgstr "非大小 (%ld vs %ld) 位元組"
-#: disk-utils/partx.c:266
-#, fuzzy, c-format
-msgid "%s: error deleting partition %d"
-msgstr "%s：錯誤刪除分割 %d"
+#: disk-utils/fsck.cramfs.c:423 disk-utils/fsck.cramfs.c:548
+#: disk-utils/swaplabel.c:109 misc-utils/uuidd.c:407 sys-utils/fallocate.c:440
+#: sys-utils/rfkill.c:565 sys-utils/setpriv.c:628 sys-utils/setpriv.c:651
+#: sys-utils/swapon.c:400 term-utils/script.c:322 term-utils/ttymsg.c:175
+#, c-format
+msgid "write failed: %s"
+msgstr "寫入失敗：%s"
-#: disk-utils/partx.c:268
-#, fuzzy, c-format
-msgid "%s: error deleting partitions %d-%d"
-msgstr "%s：錯誤刪除分割區 %d-%d"
+#: disk-utils/fsck.cramfs.c:433
+#, c-format
+msgid "lchown failed: %s"
+msgstr "lchown 失敗：%s"
-#: disk-utils/partx.c:292 disk-utils/partx.c:439 disk-utils/partx.c:953
+#: disk-utils/fsck.cramfs.c:437
#, fuzzy, c-format
-msgid "specified range <%d:%d> does not make sense"
-msgstr "指定的範圍<%d:%d>不具任何意義"
+#| msgid "mknod failed: %s"
+msgid "chmod failed: %s"
+msgstr "mknod 失敗：%s"
-#: disk-utils/partx.c:301
+#: disk-utils/fsck.cramfs.c:442
#, fuzzy, c-format
-msgid "%s: partition #%d removed\n"
-msgstr "%s：分割 #%d 移除\n"
+msgid "utimes failed: %s"
+msgstr "utime 失敗：%s"
-#: disk-utils/partx.c:305
-#, fuzzy, c-format
-msgid "%s: partition #%d already doesn't exist\n"
-msgstr "%s：分割 #%d 已經不存在\n"
+#: disk-utils/fsck.cramfs.c:471
+#, c-format
+msgid "directory inode has zero offset and non-zero size: %s"
+msgstr "目錄 inode 有零偏移值和非零大小：%s"
-#: disk-utils/partx.c:310
-#, fuzzy, c-format
-msgid "%s: deleting partition #%d failed"
-msgstr "%s：刪除分割 #%d 失敗"
+#: disk-utils/fsck.cramfs.c:486
+#, c-format
+msgid "mkdir failed: %s"
+msgstr "mkdir 失敗：%s"
-#: disk-utils/partx.c:330
-#, fuzzy, c-format
-msgid "%s: error adding partition %d"
-msgstr "%s：錯誤加入分割 %d"
+#: disk-utils/fsck.cramfs.c:502
+#, fuzzy
+msgid "illegal filename"
+msgstr " -l 列出所有檔名\n"
-#: disk-utils/partx.c:332
-#, fuzzy, c-format
-msgid "%s: error adding partitions %d-%d"
-msgstr "%s：錯誤加入分割區 %d-%d"
+#: disk-utils/fsck.cramfs.c:504
+#, fuzzy
+msgid "dangerous filename"
+msgstr "無法寫入指令稿檔案"
-#: disk-utils/partx.c:369 disk-utils/partx.c:481
-#, fuzzy, c-format
-msgid "%s: partition #%d added\n"
-msgstr "%s：分割 #%d 已加入\n"
+#: disk-utils/fsck.cramfs.c:508
+msgid "filename length is zero"
+msgstr "檔名長度為零"
-#: disk-utils/partx.c:374
-#, fuzzy, c-format
-msgid "%s: adding partition #%d failed"
-msgstr "%s：加入分割 #%d 失敗"
+#: disk-utils/fsck.cramfs.c:510
+msgid "bad filename length"
+msgstr "不當的檔名長度"
-#: disk-utils/partx.c:409
-#, fuzzy, c-format
-msgid "%s: error updating partition %d"
-msgstr "%s：錯誤刪除分割 %d"
+#: disk-utils/fsck.cramfs.c:516
+msgid "bad inode offset"
+msgstr "不當的 inode 偏移值"
-#: disk-utils/partx.c:411
-#, fuzzy, c-format
-msgid "%s: error updating partitions %d-%d"
-msgstr "%s：錯誤刪除分割區 %d-%d"
+#: disk-utils/fsck.cramfs.c:531
+msgid "file inode has zero offset and non-zero size"
+msgstr "檔案 inode 有零偏移值和非零大小"
-#: disk-utils/partx.c:475
-#, fuzzy, c-format
-msgid "%s: partition #%d resized\n"
-msgstr "%s：分割 #%d 移除\n"
+#: disk-utils/fsck.cramfs.c:534
+msgid "file inode has zero size and non-zero offset"
+msgstr "檔案 inode 有零大小和非零偏移值"
-#: disk-utils/partx.c:489
-#, fuzzy, c-format
-msgid "%s: updating partition #%d failed"
-msgstr "%s：刪除分割 #%d 失敗"
+#: disk-utils/fsck.cramfs.c:563
+msgid "symbolic link has zero offset"
+msgstr "符號連結有零偏移值"
-#: disk-utils/partx.c:526
-#, fuzzy, c-format
-msgid "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
-msgstr "#%2d：%9 ju-%9 ju (%9 ju 磁區，%6 ju MB)\n"
+#: disk-utils/fsck.cramfs.c:565
+msgid "symbolic link has zero size"
+msgstr "符號連結有零大小"
-#: disk-utils/partx.c:543 misc-utils/findmnt.c:664 misc-utils/findmnt.c:681
-#: misc-utils/lslocks.c:396 sys-utils/prlimit.c:220 sys-utils/swapon.c:149
-#: sys-utils/wdctl.c:208
-msgid "failed to add line to output"
-msgstr "加入輸出列時失敗"
+#: disk-utils/fsck.cramfs.c:574
+#, c-format
+msgid "size error in symlink: %s"
+msgstr "大小錯誤發生於符號連結：%s"
-#: disk-utils/partx.c:619 misc-utils/findmnt.c:1435 misc-utils/lsblk.c:1583
-#: misc-utils/lslocks.c:455 sys-utils/losetup.c:311 sys-utils/lscpu.c:1152
-#: sys-utils/prlimit.c:290 sys-utils/swapon.c:242 sys-utils/wdctl.c:250
-msgid "failed to initialize output table"
-msgstr "初始化輸出表格時失敗"
+#: disk-utils/fsck.cramfs.c:588
+#, c-format
+msgid "symlink failed: %s"
+msgstr "符號連結失敗：%s"
-#: disk-utils/partx.c:627 misc-utils/findmnt.c:1453 misc-utils/lsblk.c:1593
-#: misc-utils/lslocks.c:463 sys-utils/losetup.c:317 sys-utils/prlimit.c:298
-#: sys-utils/swapon.c:250 sys-utils/wdctl.c:259
-msgid "failed to initialize output column"
-msgstr "初始化輸出欄時失敗"
+#: disk-utils/fsck.cramfs.c:601
+#, c-format
+msgid "special file has non-zero offset: %s"
+msgstr "特殊檔案有非零偏移值：%s"
-#: disk-utils/partx.c:665
-#, fuzzy, c-format
-msgid "failed to initialize blkid filter for '%s'"
-msgstr "初始化 blkid 篩選器用於『%s 時失敗』"
+#: disk-utils/fsck.cramfs.c:611
+#, c-format
+msgid "fifo has non-zero size: %s"
+msgstr "fifo 有非零大小：%s"
-#: disk-utils/partx.c:673
-#, fuzzy, c-format
-msgid "%s: failed to read partition table"
-msgstr "%s：無法讀取分割表"
+#: disk-utils/fsck.cramfs.c:617
+#, c-format
+msgid "socket has non-zero size: %s"
+msgstr "通訊端有非零大小：%s"
-#: disk-utils/partx.c:679
-#, fuzzy, c-format
-msgid "%s: partition table type '%s' detected\n"
-msgstr "%s：分割表型態『%s』偵測到\n"
+#: disk-utils/fsck.cramfs.c:620
+#, c-format
+msgid "bogus mode: %s (%o)"
+msgstr "假造模式：%s (%o)"
+
+#: disk-utils/fsck.cramfs.c:629
+#, c-format
+msgid "mknod failed: %s"
+msgstr "mknod 失敗：%s"
-#: disk-utils/partx.c:683
+#: disk-utils/fsck.cramfs.c:661
#, fuzzy, c-format
-msgid "%s: partition table with no partitions"
-msgstr "%s：分割表不具任何分割區"
+msgid "directory data start (%lu) < sizeof(struct cramfs_super) + start (%zu)"
+msgstr "目錄資料起始 (%ld) < sizeof(struct cramfs_super) + 起始 (%ld)"
-#: disk-utils/partx.c:695
+#: disk-utils/fsck.cramfs.c:665
#, fuzzy, c-format
-msgid " %s [-a|-d|-s|-u] [--nr <n:m> | <partition>] <disk>\n"
-msgstr " %s [-a|-d|-s] [--nr <n:m>|<分割>]<磁碟>\n"
+msgid "directory data end (%lu) != file data start (%lu)"
+msgstr "目錄資料結束 (%ld) != 檔案資料起始 (%ld)"
+
+#: disk-utils/fsck.cramfs.c:669
+msgid "invalid file data offset"
+msgstr "無效的檔案資料偏移值"
-#: disk-utils/partx.c:699
+#: disk-utils/fsck.cramfs.c:716 disk-utils/mkfs.cramfs.c:741
#, fuzzy
-msgid " -a, --add add specified partitions or all of them\n"
-msgstr " -i, --irq <num> 指定並列埠 irq\n"
+msgid "invalid blocksize argument"
+msgstr "無效的區塊大小引數"
-#: disk-utils/partx.c:700
-msgid " -d, --delete delete specified partitions or all of them\n"
-msgstr ""
+#: disk-utils/fsck.cramfs.c:750
+#, c-format
+msgid "%s: OK\n"
+msgstr "%s：確定\n"
-#: disk-utils/partx.c:701
+#: disk-utils/fsck.minix.c:185
#, fuzzy
-msgid ""
-" -s, --show list partitions\n"
-"\n"
-msgstr " -n, --noparity 設定同位到無\n"
+msgid "Check the consistency of a Minix filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
-#: disk-utils/partx.c:702
+#: disk-utils/fsck.minix.c:187
#, fuzzy
-msgid " -u, --update update specified partitions or all of them\n"
-msgstr " -n, --noparity 設定同位到無\n"
-
-#: disk-utils/partx.c:703 misc-utils/lsblk.c:1370
-msgid ""
-" -b, --bytes print SIZE in bytes rather than in human readable "
-"format\n"
-msgstr ""
-
-#: disk-utils/partx.c:704
-msgid " -g, --noheadings don't print headings for --show\n"
-msgstr ""
-
-#: disk-utils/partx.c:705
-msgid " -n, --nr <n:m> specify the range of partitions (e.g. --nr 2:4)\n"
-msgstr ""
-
-#: disk-utils/partx.c:706
-msgid " -o, --output <type> define which output columns to use\n"
-msgstr ""
+msgid " -l, --list list all filenames\n"
+msgstr " -l 列出所有檔名\n"
-#: disk-utils/partx.c:707 misc-utils/lsblk.c:1383
+#: disk-utils/fsck.minix.c:188
#, fuzzy
-msgid " -P, --pairs use key=\"value\" output format\n"
-msgstr " -V, --version 輸出版本資訊\n"
+msgid " -a, --auto automatic repair\n"
+msgstr " -a 自動修復\n"
-#: disk-utils/partx.c:708 misc-utils/lsblk.c:1384
+#: disk-utils/fsck.minix.c:189
#, fuzzy
-msgid " -r, --raw use raw output format\n"
-msgstr " -V, --version 輸出版本資訊\n"
-
-#: disk-utils/partx.c:709
-msgid ""
-" -t, --type <type> specify the partition type (dos, bsd, solaris, etc.)\n"
-msgstr ""
+msgid " -r, --repair interactive repair\n"
+msgstr " -r 互動式修復\n"
-#: disk-utils/partx.c:710
+#: disk-utils/fsck.minix.c:190
#, fuzzy
-msgid " -v, --verbose verbose mode\n"
+msgid " -v, --verbose be verbose\n"
msgstr " -v, --verbose 列印詳細的資料\n"
-#: disk-utils/partx.c:716
-#, fuzzy
-msgid ""
-"\n"
-"Available columns (for --show, --raw or --pairs):\n"
-msgstr ""
-"\n"
-"可用欄位 (用於 --show，--raw 或 --pairs)：\n"
-
-#: disk-utils/partx.c:789
-#, fuzzy
-msgid "failed to parse --nr <M-N> range"
-msgstr "剖析 --nr 時失敗 <M-N> 範圍"
-
-#: disk-utils/partx.c:889
-#, fuzzy
-msgid "--nr and <partition> are mutually exclusive"
-msgstr "--nr 和 <partition> 彼此互斥"
-
-#: disk-utils/partx.c:908
-#, fuzzy, c-format
-msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
-msgstr "分割：%s，磁碟：%s，降低：%d，大寫：%d\n"
-
-#: disk-utils/partx.c:920
-#, fuzzy, c-format
-msgid "%s: cannot delete partitions"
-msgstr "%s：無法刪除分割區"
-
-#: disk-utils/partx.c:923
-#, fuzzy, c-format
-msgid "%s: partitioned loop devices unsupported"
-msgstr "%s：分割的迴圈裝置不受支援的"
-
-#: disk-utils/partx.c:940
-#, fuzzy, c-format
-msgid "%s: failed to initialize blkid prober"
-msgstr "%s：無法初始化 blkid prober"
-
-#: disk-utils/raw.c:52
-#, fuzzy, c-format
-msgid ""
-" %1$s %2$srawN <major> <minor>\n"
-" %1$s %2$srawN /dev/<blockdevice>\n"
-" %1$s -q %2$srawN\n"
-" %1$s -qa\n"
-msgstr ""
-" %1$s %2$srawN <major><次要>\n"
-" %1$s %2$srawN/dev/<blockdevice>\n"
-" %1$s -q %2$srawN\n"
-" %1$s -qa\n"
-
-#: disk-utils/raw.c:58
+#: disk-utils/fsck.minix.c:191
#, fuzzy
-msgid " -q, --query set query mode\n"
-msgstr " -q, --query 設定查詢模式\n"
+msgid " -s, --super output super-block information\n"
+msgstr " -s 輸出超區塊資訊\n"
-#: disk-utils/raw.c:59
+#: disk-utils/fsck.minix.c:192
#, fuzzy
-msgid " -a, --all query all raw devices\n"
-msgstr " -a, --all 查詢所有原始裝置\n"
-
-#: disk-utils/raw.c:161
-#, fuzzy, c-format
-msgid ""
-"Device '%s' is the control raw device (use raw<N> where <N> is greater than "
-"zero)"
-msgstr "裝置『%s』是控制原始裝置 (使用原始<N> 位置<N>是大於零)"
-
-#: disk-utils/raw.c:178
-#, fuzzy, c-format
-msgid "Cannot locate block device '%s'"
-msgstr "無法尋找位置區塊裝置『%s』"
-
-#: disk-utils/raw.c:181
-#, fuzzy, c-format
-msgid "Device '%s' is not a block device"
-msgstr "裝置『%s』並非區塊裝置"
+msgid " -m, --uncleared activate mode not cleared warnings\n"
+msgstr " -m 啟用模式無法清空的警告\n"
-#: disk-utils/raw.c:190 disk-utils/raw.c:193 sys-utils/ipcrm.c:340
-#: sys-utils/ipcrm.c:353 sys-utils/ipcrm.c:366
+#: disk-utils/fsck.minix.c:193
#, fuzzy
-msgid "failed to parse argument"
-msgstr "剖析引數時失敗"
-
-#: disk-utils/raw.c:210
-#, fuzzy, c-format
-msgid "Cannot open master raw device '%s'"
-msgstr "無法開啟主原始裝置『%s』"
-
-#: disk-utils/raw.c:225
-#, fuzzy, c-format
-msgid "Cannot locate raw device '%s'"
-msgstr "無法尋找位置原始裝置『%s』"
-
-#: disk-utils/raw.c:228
-#, fuzzy, c-format
-msgid "Raw device '%s' is not a character dev"
-msgstr "原始裝置『%s』並非字元 dev"
+msgid " -f, --force force check\n"
+msgstr " -f 強制檢查\n"
-#: disk-utils/raw.c:232
+#. TRANSLATORS: these yes no questions uses rpmatch(), and should be
+#. * translated.
+#: disk-utils/fsck.minix.c:252
#, fuzzy, c-format
-msgid "Device '%s' is not a raw dev"
-msgstr "裝置『%s』並非原始 dev"
-
-#: disk-utils/raw.c:242
-#, fuzzy
-msgid "Error querying raw device"
-msgstr "查詢原始裝置時發生錯誤"
+msgid "%s (y/n)? "
+msgstr "%s (y/n)？"
-#: disk-utils/raw.c:251 disk-utils/raw.c:266
+#: disk-utils/fsck.minix.c:252
#, fuzzy, c-format
-msgid "%sraw%d: bound to major %d, minor %d\n"
-msgstr "%sraw%d： 約束到主要的 %d，次要 %d\n"
-
-#: disk-utils/raw.c:265
-#, fuzzy
-msgid "Error setting raw device"
-msgstr "設定原始裝置時發生錯誤"
+msgid "%s (n/y)? "
+msgstr "%s (n/y)？"
-#: disk-utils/resizepart.c:19
+#: disk-utils/fsck.minix.c:269
#, fuzzy, c-format
-msgid " %s <disk device> <partition number> <length>\n"
-msgstr " %s <disk device><分割區編號><長度>\n"
+msgid "y\n"
+msgstr "y\n"
-#: disk-utils/resizepart.c:100
+#: disk-utils/fsck.minix.c:271
#, fuzzy, c-format
-msgid "%s: failed to get start of the partition number %s"
-msgstr "%s：無法提取開始的分割區編號 %s"
-
-#: disk-utils/resizepart.c:105
-#, fuzzy
-msgid "failed to resize partition"
-msgstr "調整大小分割時失敗"
-
-#: disk-utils/swaplabel.c:50 disk-utils/swaplabel.c:63
-#, c-format
-msgid "%s: unable to probe device"
-msgstr "%s：無法探查裝置"
+msgid "n\n"
+msgstr "n\n"
-#: disk-utils/swaplabel.c:65
+#: disk-utils/fsck.minix.c:287
#, c-format
-msgid "%s: ambivalent probing result, use wipefs(8)"
-msgstr "%s：探查結果產生矛盾，使用 wipefs(8)"
+msgid "%s is mounted.\t "
+msgstr "%s 已掛載。\t"
-#: disk-utils/swaplabel.c:67
-#, c-format
-msgid "%s: not a valid swap partition"
-msgstr "%s：不是有效的交換分割區"
+#: disk-utils/fsck.minix.c:289
+msgid "Do you really want to continue"
+msgstr "您真的要繼續嗎？"
-#: disk-utils/swaplabel.c:74
+#: disk-utils/fsck.minix.c:293
#, c-format
-msgid "%s: unsupported swap version '%s'"
-msgstr "%s：不受支援的交換版本「%s」"
+msgid "check aborted.\n"
+msgstr "已放棄檢查。\n"
-#: disk-utils/swaplabel.c:114
+#: disk-utils/fsck.minix.c:318 disk-utils/fsck.minix.c:339
#, c-format
-msgid "failed to parse UUID: %s"
-msgstr "å\89\96æ\9e\90 UUID æ\99\82失æ\95\97ï¼\9a%s"
+msgid "Zone nr < FIRSTZONE in file `%s'."
+msgstr "å\8d\80å\9f\9f nr < æª\94æ¡\88ã\80\8c%sã\80\8dä¸ç\9a\84 FIRSTZONEã\80\82"
-#: disk-utils/swaplabel.c:118
+#: disk-utils/fsck.minix.c:321 disk-utils/fsck.minix.c:342
#, c-format
-msgid "%s: failed to seek to swap UUID"
-msgstr "%s：無法尋指到交換 UUID"
+msgid "Zone nr >= ZONES in file `%s'."
+msgstr "區域 nr >= 檔案「%s」中的 ZONES。"
-#: disk-utils/swaplabel.c:122
-#, c-format
-msgid "%s: failed to write UUID"
-msgstr "%s：無法寫入 UUID"
+#: disk-utils/fsck.minix.c:325 disk-utils/fsck.minix.c:346
+msgid "Remove block"
+msgstr "移除區塊"
-#: disk-utils/swaplabel.c:133
+#: disk-utils/fsck.minix.c:362
#, c-format
-msgid "%s: failed to seek to swap label "
-msgstr "%s：無法尋指到交換標籤 "
+msgid "Read error: unable to seek to block in file '%s'\n"
+msgstr "讀取錯誤：無法在檔案「%s」中搜尋到區塊\n"
-#: disk-utils/swaplabel.c:140
+#: disk-utils/fsck.minix.c:368
#, c-format
-msgid "label is too long. Truncating it to '%s'"
-msgstr "標籤太長。將它截斷為「%s」"
+msgid "Read error: bad block in file '%s'\n"
+msgstr "讀取錯誤：在檔案「%s」中有不良區塊\n"
-#: disk-utils/swaplabel.c:143
+#: disk-utils/fsck.minix.c:380
#, c-format
-msgid "%s: failed to write label"
-msgstr "%s：無法寫入標籤"
-
-#: disk-utils/swaplabel.c:165
-#, fuzzy
msgid ""
-" -L, --label <label> specify a new label\n"
-" -U, --uuid <uuid> specify a new uuid\n"
+"Internal error: trying to write bad block\n"
+"Write request ignored\n"
msgstr ""
-" -L, --label <label> 指定新的標貼\n"
-" -U, --uuid<uuid> 指定新的 uuid\n"
+"內部錯誤：嘗試寫入不良區塊\n"
+"寫入要求已忽略\n"
-#: disk-utils/swaplabel.c:208
-msgid "ignore -U (UUIDs are unsupported)"
-msgstr "忽略 -U (UUIDs 不受支援)"
+#: disk-utils/fsck.minix.c:386
+msgid "seek failed in write_block"
+msgstr "write_block 時搜尋失敗"
-#: fdisks/cfdisk.c:370
+#: disk-utils/fsck.minix.c:389
#, c-format
-msgid "%s: Out of memory!\n"
-msgstr "%s：記憶體不足！\n"
-
-# "無法建立 %s: %s\n"
-#: fdisks/cfdisk.c:395 fdisks/cfdisk.c:1909
-msgid "Unusable"
-msgstr "無法使用"
-
-#: fdisks/cfdisk.c:397 fdisks/cfdisk.c:1911
-msgid "Free Space"
-msgstr "剩餘空間"
+msgid "Write error: bad block in file '%s'\n"
+msgstr "寫入錯誤：在檔案「%s」中有不良區塊\n"
-#: fdisks/cfdisk.c:409
+#: disk-utils/fsck.minix.c:423
#, fuzzy, c-format
-msgid "write failed\n"
-msgstr "寫入失敗"
-
-#: fdisks/cfdisk.c:416
-#, c-format
-msgid "Disk has been changed.\n"
-msgstr "磁碟已變更。\n"
-
-#: fdisks/cfdisk.c:418
-#, c-format
-msgid "Reboot the system to ensure the partition table is correctly updated.\n"
-msgstr "系統重新開機以確保分割表正確地被更新。\n"
+msgid "Warning: block out of range\n"
+msgstr "警告：inode 數量太大。\n"
-#: fdisks/cfdisk.c:422
-#, c-format
-msgid ""
-"\n"
-"WARNING: If you have created or modified any\n"
-"DOS 6.x partitions, please see the cfdisk manual\n"
-"page for additional information.\n"
-msgstr ""
-"\n"
-"警告：如果您已建立或修改任何\n"
-"DOS 6.x 分割區，請參看 cfdisk 手冊\n"
-"以獲得額外的資訊。\n"
+#: disk-utils/fsck.minix.c:510
+msgid "seek failed in write_super_block"
+msgstr "write_super_block 時搜尋失敗"
-#: fdisks/cfdisk.c:566
-msgid "FATAL ERROR"
-msgstr "嚴重錯誤"
+#: disk-utils/fsck.minix.c:512
+msgid "unable to write super-block"
+msgstr "無法寫入 super-block"
-#: fdisks/cfdisk.c:567
-msgid "Press any key to exit cfdisk"
-msgstr "按任何鍵以離開 cfdisk"
+#: disk-utils/fsck.minix.c:524
+msgid "Unable to write inode map"
+msgstr "無法寫入 inode 對映"
-#: fdisks/cfdisk.c:614 fdisks/cfdisk.c:622
-msgid "Cannot seek on disk drive"
-msgstr "無法搜尋磁碟"
+#: disk-utils/fsck.minix.c:527
+msgid "Unable to write zone map"
+msgstr "無法寫入區域對映"
-#: fdisks/cfdisk.c:616
-msgid "Cannot read disk drive"
-msgstr "無法讀取磁碟"
+#: disk-utils/fsck.minix.c:530
+msgid "Unable to write inodes"
+msgstr "無法寫入 inodes"
-#: fdisks/cfdisk.c:624
-msgid "Cannot write disk drive"
-msgstr "無法寫入磁碟"
+#: disk-utils/fsck.minix.c:562
+msgid "unable to alloc buffer for superblock"
+msgstr "無法配置緩衝區給超區塊"
-#: fdisks/cfdisk.c:832
-msgid "Too many partitions"
-msgstr "分割區過多"
+#: disk-utils/fsck.minix.c:565
+msgid "unable to read super block"
+msgstr "無法讀取超區塊"
-#: fdisks/cfdisk.c:837
-msgid "Partition begins before sector 0"
-msgstr "分割區開端小於磁區 0"
+#: disk-utils/fsck.minix.c:587
+msgid "bad magic number in super-block"
+msgstr "超區塊中有不當的魔術數字"
-#: fdisks/cfdisk.c:842
-msgid "Partition ends before sector 0"
-msgstr "å\88\86å\89²å\8d\80çµ\90å°¾å°\8fæ\96¼ç£\81å\8d\80 0"
+#: disk-utils/fsck.minix.c:589
+msgid "Only 1k blocks/zones supported"
+msgstr "å\8fªæ\9c\89æ\94¯æ\8f´ 1k å\8d\80å¡\8a/å\8d\80å\9f\9f"
-#: fdisks/cfdisk.c:847
-msgid "Partition begins after end-of-disk"
-msgstr "分割區開端大於磁碟末端"
+#: disk-utils/fsck.minix.c:591
+#, fuzzy
+msgid "bad s_ninodes field in super-block"
+msgstr "超區塊中有不當的 s_imap_blocks 欄位"
-#: fdisks/cfdisk.c:852
-msgid "Partition ends after end-of-disk"
-msgstr "分割區結尾大於磁碟末端"
+#: disk-utils/fsck.minix.c:593
+msgid "bad s_imap_blocks field in super-block"
+msgstr "超區塊中有不當的 s_imap_blocks 欄位"
-#: fdisks/cfdisk.c:876
-msgid "logical partitions not in disk order"
-msgstr "邏輯分割區未按磁碟順序"
+#: disk-utils/fsck.minix.c:595
+#, fuzzy
+msgid "bad s_firstdatazone field in super-block"
+msgstr "超區塊中有不當的 s_imap_blocks 欄位"
-#: fdisks/cfdisk.c:879
-msgid "logical partitions overlap"
-msgstr "邏輯分割區重疊"
+#: disk-utils/fsck.minix.c:598
+msgid "bad s_zmap_blocks field in super-block"
+msgstr "超區塊中有不當的 s_zmap_blocks 欄位"
-#: fdisks/cfdisk.c:883
-msgid "enlarged logical partitions overlap"
-msgstr "擴大的邏輯分割區重疊"
+#: disk-utils/fsck.minix.c:614
+msgid "Unable to allocate buffer for inode map"
+msgstr "無法配置 inode 對映緩衝區"
-#: fdisks/cfdisk.c:913
-msgid ""
-"!!!! Internal error creating logical drive with no extended partition !!!!"
-msgstr "!!!! 內部錯誤! 新增邏輯磁碟沒有用於擴展分割區 !!!!"
+#: disk-utils/fsck.minix.c:617
+msgid "Unable to allocate buffer for zone map"
+msgstr "無法配置區域對映緩衝區"
-#: fdisks/cfdisk.c:924 fdisks/cfdisk.c:936
-msgid ""
-"Cannot create logical drive here -- would create two extended partitions"
-msgstr "無法在此新增邏輯磁碟 -- 如此將造成二個擴展分割區"
+#: disk-utils/fsck.minix.c:620
+msgid "Unable to allocate buffer for inodes"
+msgstr "無法配置 inodes 緩衝區"
-#: fdisks/cfdisk.c:1070
-msgid "Menu item too long. Menu may look odd."
-msgstr "選單項目太長，選單看起來會很奇怪。"
+#: disk-utils/fsck.minix.c:623
+msgid "Unable to allocate buffer for inode count"
+msgstr "無法配置 inode 計數緩衝區"
-#: fdisks/cfdisk.c:1185
-msgid "Illegal key"
-msgstr "ç\84¡æ\95\88æ\8c\89é\8dµ"
+#: disk-utils/fsck.minix.c:626
+msgid "Unable to allocate buffer for zone count"
+msgstr "ç\84¡æ³\95é\85\8dç½®å\8d\80å\9f\9fè¨\88æ\95¸ç·©è¡\9då\8d\80"
-#: fdisks/cfdisk.c:1210
-msgid "Press a key to continue"
-msgstr "按任何鍵繼續"
+#: disk-utils/fsck.minix.c:630
+msgid "Unable to read inode map"
+msgstr "無法讀取 inode 對映"
-#: fdisks/cfdisk.c:1257 fdisks/cfdisk.c:1880 fdisks/cfdisk.c:2420
-#: fdisks/cfdisk.c:2422
-msgid "Primary"
-msgstr "主要的"
+#: disk-utils/fsck.minix.c:634
+msgid "Unable to read zone map"
+msgstr "無法讀取區域對映"
-#: fdisks/cfdisk.c:1257
-msgid "Create a new primary partition"
-msgstr "新增一個主要分割區"
+#: disk-utils/fsck.minix.c:638
+msgid "Unable to read inodes"
+msgstr "無法讀取 inodes"
-#: fdisks/cfdisk.c:1258 fdisks/cfdisk.c:1880 fdisks/cfdisk.c:2419
-#: fdisks/cfdisk.c:2422
-msgid "Logical"
-msgstr "邏輯的"
+#: disk-utils/fsck.minix.c:640
+#, c-format
+msgid "Warning: Firstzone != Norm_firstzone\n"
+msgstr "警告：Firstzone != Norm_firstzone\n"
-#: fdisks/cfdisk.c:1258
-msgid "Create a new logical partition"
-msgstr "新增一個邏輯分割區"
+#: disk-utils/fsck.minix.c:645
+#, c-format
+msgid "%ld inodes\n"
+msgstr "%ld inodes\n"
-#: fdisks/cfdisk.c:1259 fdisks/cfdisk.c:1314 fdisks/cfdisk.c:2093
-msgid "Cancel"
-msgstr "取消"
-
-#: fdisks/cfdisk.c:1259 fdisks/cfdisk.c:1314
-msgid "Don't create a partition"
-msgstr "不要新增一個分割區"
-
-#: fdisks/cfdisk.c:1275
-msgid "!!! Internal error !!!"
-msgstr "!!! 內部錯誤 !!!"
-
-#: fdisks/cfdisk.c:1278
-msgid "Size (in MB): "
-msgstr "大小 (單位 MB): "
-
-#: fdisks/cfdisk.c:1312
-msgid "Beginning"
-msgstr "開始"
+#: disk-utils/fsck.minix.c:646
+#, c-format
+msgid "%ld blocks\n"
+msgstr "%ld 區塊\n"
-#: fdisks/cfdisk.c:1312
-msgid "Add partition at beginning of free space"
-msgstr "新增分割區於剩餘空間開頭位置"
+#: disk-utils/fsck.minix.c:647 disk-utils/mkfs.minix.c:571
+#, fuzzy, c-format
+msgid "Firstdatazone=%jd (%jd)\n"
+msgstr "第一資料區=%ld (%ld)\n"
-#: fdisks/cfdisk.c:1313 libfdisk/src/bsd.c:395 libfdisk/src/dos.c:1606
-#: libfdisk/src/gpt.c:1201 libfdisk/src/sgi.c:278 libfdisk/src/sun.c:703
-msgid "End"
-msgstr "結束"
+#: disk-utils/fsck.minix.c:649
+#, c-format
+msgid "Zonesize=%d\n"
+msgstr "區域大小=%d\n"
-#: fdisks/cfdisk.c:1313
-msgid "Add partition at end of free space"
-msgstr "新增分割區於剩餘空間末端"
+#: disk-utils/fsck.minix.c:650
+#, fuzzy, c-format
+msgid "Maxsize=%zu\n"
+msgstr "最大大小=%ld\n"
-#: fdisks/cfdisk.c:1331
-msgid "No room to create the extended partition"
-msgstr "已無多餘的磁碟空間可開啟擴充分割區"
+#: disk-utils/fsck.minix.c:652
+#, c-format
+msgid "Filesystem state=%d\n"
+msgstr "檔案系統狀態=%d\n"
-#: fdisks/cfdisk.c:1400
-msgid "No partition table.\n"
-msgstr "無分割表。\n"
+#: disk-utils/fsck.minix.c:653
+#, fuzzy, c-format
+msgid ""
+"namelen=%zd\n"
+"\n"
+msgstr ""
+"namelen=%zd\n"
+"\n"
-#: fdisks/cfdisk.c:1404
-msgid "No partition table. Starting with zero table."
-msgstr "無分割表。以空的表格開始。"
+#: disk-utils/fsck.minix.c:668 disk-utils/fsck.minix.c:718
+#, c-format
+msgid "Inode %d marked unused, but used for file '%s'\n"
+msgstr "Inode %d 標記為未使用，但是卻用於檔案「%s」\n"
-#: fdisks/cfdisk.c:1414
-msgid "Bad signature on partition table"
-msgstr "分割表上有不當的簽章"
+#: disk-utils/fsck.minix.c:671 disk-utils/fsck.minix.c:721
+msgid "Mark in use"
+msgstr "標記為使用中"
-#: fdisks/cfdisk.c:1418
-msgid "Unknown partition table type"
-msgstr "不明的分割表類型"
+#: disk-utils/fsck.minix.c:693 disk-utils/fsck.minix.c:741
+#, c-format
+msgid "The file `%s' has mode %05o\n"
+msgstr "檔案「%s」具有模式 %05o\n"
-#: fdisks/cfdisk.c:1420
-msgid "Do you wish to start with a zero table [y/N] ?"
-msgstr "您想要以一個空的分割表開始嗎 [y/N] ?"
+#: disk-utils/fsck.minix.c:700 disk-utils/fsck.minix.c:747
+#, c-format
+msgid "Warning: inode count too big.\n"
+msgstr "警告：inode 數量太大。\n"
-#: fdisks/cfdisk.c:1467
-msgid "You specified more cylinders than fit on disk"
-msgstr "æ\82¨æ\8c\87å®\9aäº\86æ¯\94ç£\81ç¢\9fä¸\8aé\82\84å¤\9aç\9a\84ç£\81æ\9f±æ\95¸"
+#: disk-utils/fsck.minix.c:759 disk-utils/fsck.minix.c:767
+msgid "root inode isn't a directory"
+msgstr "æ ¹ inode 並é\9d\9eç\9b®é\8c\84"
-#: fdisks/cfdisk.c:1503
-msgid "Cannot open disk drive"
-msgstr "無法開啟磁碟"
+#: disk-utils/fsck.minix.c:779 disk-utils/fsck.minix.c:810
+#, c-format
+msgid "Block has been used before. Now in file `%s'."
+msgstr "區塊於之前已使用。現在屬於檔案「%s」。"
-#: fdisks/cfdisk.c:1505 fdisks/cfdisk.c:1687
-msgid "Opened disk read-only - you have no permission to write"
-msgstr "已開啟磁碟為唯讀 - 您無權限可寫入"
+#: disk-utils/fsck.minix.c:781 disk-utils/fsck.minix.c:812
+#: disk-utils/fsck.minix.c:1145 disk-utils/fsck.minix.c:1154
+#: disk-utils/fsck.minix.c:1201 disk-utils/fsck.minix.c:1210
+msgid "Clear"
+msgstr "清除"
-#: fdisks/cfdisk.c:1528
-msgid "Cannot get disk size"
-msgstr "無法取得磁碟大小"
+#: disk-utils/fsck.minix.c:791 disk-utils/fsck.minix.c:822
+#, c-format
+msgid "Block %d in file `%s' is marked not in use."
+msgstr "檔案「%2$s」中的 區塊 %1$d 已標記為未被使用。"
-#: fdisks/cfdisk.c:1554
-msgid "Bad primary partition"
-msgstr "壞的主要分割區"
+#: disk-utils/fsck.minix.c:793 disk-utils/fsck.minix.c:824
+msgid "Correct"
+msgstr "修正"
-#: fdisks/cfdisk.c:1584
-msgid "Bad logical partition"
-msgstr "壞的邏輯分割區"
+#: disk-utils/fsck.minix.c:963 disk-utils/fsck.minix.c:1036
+#, c-format
+msgid "The directory '%s' contains a bad inode number for file '%.*s'."
+msgstr "目錄「%s」含有不當的 inode 編號於檔案「%.*s」。"
-#: fdisks/cfdisk.c:1699
-msgid "Warning!! This may destroy data on your disk!"
-msgstr "警告!! 這項操作可能會使您硬碟中的資料消失!"
+#: disk-utils/fsck.minix.c:965 disk-utils/fsck.minix.c:1038
+msgid " Remove"
+msgstr " 移除"
-#: fdisks/cfdisk.c:1703
-msgid ""
-"Are you sure you want to write the partition table to disk? (yes or no): "
-msgstr "您確定要將分割表寫入硬碟中嗎? (yes 或 no):"
+#: disk-utils/fsck.minix.c:981 disk-utils/fsck.minix.c:1054
+#, c-format
+msgid "%s: bad directory: '.' isn't first\n"
+msgstr "%s：不當的目錄：「.」不是第一個\n"
-#: fdisks/cfdisk.c:1709 sys-utils/lscpu.c:986 sys-utils/lscpu.c:996
+#: disk-utils/fsck.minix.c:990 disk-utils/fsck.minix.c:1063
#, c-format
-msgid "no"
-msgstr "否"
+msgid "%s: bad directory: '..' isn't second\n"
+msgstr "%s：不當的目錄：「..」不是第二個\n"
-#: fdisks/cfdisk.c:1711
-msgid "Did not write partition table to disk"
-msgstr "不要將分割表寫入硬碟"
+#: disk-utils/fsck.minix.c:1096 disk-utils/fsck.minix.c:1119
+msgid "internal error"
+msgstr "內部錯誤"
-#: fdisks/cfdisk.c:1713 sys-utils/lscpu.c:986 sys-utils/lscpu.c:996
+#: disk-utils/fsck.minix.c:1099 disk-utils/fsck.minix.c:1122
#, c-format
-msgid "yes"
-msgstr "是"
+msgid "%s: bad directory: size < 32"
+msgstr "%s：不當的目錄：大小 < 32"
-#: fdisks/cfdisk.c:1717
-msgid "Please enter `yes' or `no'"
-msgstr "請鍵入 `yes' 或 `no'"
+#: disk-utils/fsck.minix.c:1105
+#, fuzzy, c-format
+msgid "%s: bad directory: invalid i_zone, use --repair to fix\n"
+msgstr "%s：不當的目錄：「.」不是第一個\n"
-#: fdisks/cfdisk.c:1721
-msgid "Writing partition table to disk..."
-msgstr "正寫入分割表到硬碟…"
+#: disk-utils/fsck.minix.c:1134
+msgid "seek failed in bad_zone"
+msgstr "在損毀區域中搜尋失敗"
-#: fdisks/cfdisk.c:1746 fdisks/cfdisk.c:1750
-msgid "Wrote partition table to disk"
-msgstr "已將分割表寫入硬碟"
+#: disk-utils/fsck.minix.c:1144 disk-utils/fsck.minix.c:1200
+#, fuzzy, c-format
+msgid "Inode %lu mode not cleared."
+msgstr "Inode %lu 模式無法清空。"
-#: fdisks/cfdisk.c:1748
-msgid ""
-"Wrote partition table, but re-read table failed. Run partprobe(8), kpartx"
-"(8) or reboot to update table."
-msgstr ""
-"已寫入分割表，但重讀失敗。 請執行 partprobe(8)、kpartx(8) 或重新開機以更新分"
-"割表。"
+#: disk-utils/fsck.minix.c:1153 disk-utils/fsck.minix.c:1209
+#, fuzzy, c-format
+msgid "Inode %lu not used, marked used in the bitmap."
+msgstr "Inode %lu 未使用，標記的已用於位元圖。"
-#: fdisks/cfdisk.c:1758
-msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
-msgstr "沒有主要分割區被標記為可開機. DOS MBR 無法由此開機."
+#: disk-utils/fsck.minix.c:1159 disk-utils/fsck.minix.c:1215
+#, fuzzy, c-format
+msgid "Inode %lu used, marked unused in the bitmap."
+msgstr "Inode %lu 使用，標記的未使用的在中位元圖。"
-#: fdisks/cfdisk.c:1760
-msgid ""
-"More than one primary partition is marked bootable. DOS MBR cannot boot this."
-msgstr "超過一個主要分割區標記為可開機. DOS MBR 無法由此開機."
+#: disk-utils/fsck.minix.c:1160 disk-utils/fsck.minix.c:1216
+msgid "Set"
+msgstr "設定"
-#: fdisks/cfdisk.c:1818 fdisks/cfdisk.c:1941 fdisks/cfdisk.c:2029
-msgid "Enter filename or press RETURN to display on screen: "
-msgstr "鍵入檔名或按 Enter 鍵以顯示於螢幕上: "
+#: disk-utils/fsck.minix.c:1164 disk-utils/fsck.minix.c:1220
+#, fuzzy, c-format
+msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
+msgstr "Inode %lu (模式=%07o)，inlinks=%d(_N)，計數=%d。"
-#: fdisks/cfdisk.c:1838
-#, c-format
-msgid "Disk Drive: %s\n"
-msgstr "硬碟: %s\n"
+#: disk-utils/fsck.minix.c:1167 disk-utils/fsck.minix.c:1223
+msgid "Set i_nlinks to count"
+msgstr "設定 in_links 加入計數"
-#: fdisks/cfdisk.c:1840
-msgid "Sector 0:\n"
-msgstr "磁區 0:\n"
+#: disk-utils/fsck.minix.c:1179 disk-utils/fsck.minix.c:1235
+#, fuzzy, c-format
+msgid "Zone %lu: marked in use, no file uses it."
+msgstr "區 %lu：標記的在中使用，沒有檔案使用它。"
-#: fdisks/cfdisk.c:1847
-#, c-format
-msgid "Sector %d:\n"
-msgstr "磁區 %d:\n"
+#: disk-utils/fsck.minix.c:1181 disk-utils/fsck.minix.c:1237
+msgid "Unmark"
+msgstr "取消標記"
-#: fdisks/cfdisk.c:1871
-msgid " None "
-msgstr " 無 "
+#: disk-utils/fsck.minix.c:1186 disk-utils/fsck.minix.c:1242
+#, fuzzy, c-format
+msgid "Zone %lu: in use, counted=%d\n"
+msgstr "區 %lu：在中使用，計數=%d\n"
-#: fdisks/cfdisk.c:1873
-msgid " Pri/Log"
-msgstr " 主要/邏輯"
+#: disk-utils/fsck.minix.c:1189 disk-utils/fsck.minix.c:1245
+#, fuzzy, c-format
+msgid "Zone %lu: not in use, counted=%d\n"
+msgstr "區 %lu：不在使用中，計數=%d\n"
-#: fdisks/cfdisk.c:1875
-msgid " Primary"
-msgstr " 主要的 "
+#: disk-utils/fsck.minix.c:1295
+msgid "bad inode size"
+msgstr "不當的 inode 大小"
-#: fdisks/cfdisk.c:1877
-msgid " Logical"
-msgstr " 邏輯的"
+#: disk-utils/fsck.minix.c:1297
+msgid "bad v2 inode size"
+msgstr "不當的 v2 inode 大小"
-#: fdisks/cfdisk.c:1915 fdisks/fdisk.c:181 fdisks/fdisk.c:182
-#: fdisks/fdisk.c:187 fdisks/sfdisk.c:585 libfdisk/src/ask.c:660
-#: libfdisk/src/dos.c:1661
-msgid "Unknown"
-msgstr "未知"
+#: disk-utils/fsck.minix.c:1341
+msgid "need terminal for interactive repairs"
+msgstr "需要終端機以進行互動式修復"
-#: fdisks/cfdisk.c:1921 fdisks/cfdisk.c:2397 libfdisk/src/dos.c:1604
-#: libfdisk/src/sun.c:33
-msgid "Boot"
-msgstr "可開機"
+#: disk-utils/fsck.minix.c:1345
+#, fuzzy, c-format
+msgid "cannot open %s: %s"
+msgstr "無法開啟 %s：%s"
-#: fdisks/cfdisk.c:1923
+#: disk-utils/fsck.minix.c:1356
#, c-format
-msgid "(%02X)"
-msgstr "(%02X)"
-
-#: fdisks/cfdisk.c:1925
-msgid "None"
-msgstr "無"
+msgid "%s is clean, no check.\n"
+msgstr "%s 已清除，不做檢查。\n"
-#: fdisks/cfdisk.c:1960 fdisks/cfdisk.c:2048
+#: disk-utils/fsck.minix.c:1361
#, c-format
-msgid "Partition Table for %s\n"
-msgstr "%s 的分割表\n"
+msgid "Forcing filesystem check on %s.\n"
+msgstr "強制檢查 %s 檔案系統。\n"
-#: fdisks/cfdisk.c:1962
-msgid " First Last\n"
-msgstr " 第一個 最後的\n"
+#: disk-utils/fsck.minix.c:1363
+#, c-format
+msgid "Filesystem on %s is dirty, needs checking.\n"
+msgstr "%s 檔案系統不乾淨，需要檢查。\n"
-#: fdisks/cfdisk.c:1963
+#: disk-utils/fsck.minix.c:1395
+#, c-format
msgid ""
-" # Type Sector Sector Offset Length Filesystem Type (ID) "
-"Flag\n"
+"\n"
+"%6ld inodes used (%ld%%)\n"
msgstr ""
-" # 類型 磁區 磁區偏移值 長度 檔案系統類型 (ID) 旗"
-"標\n"
+"\n"
+"%6ld inodes 已使用 (%ld%%)\n"
+
+#: disk-utils/fsck.minix.c:1401
+#, c-format
+msgid "%6ld zones used (%ld%%)\n"
+msgstr "%6ld 區域已使用 (%ld%%)\n"
-#: fdisks/cfdisk.c:1964
+#: disk-utils/fsck.minix.c:1403
+#, c-format
msgid ""
-"-- ------- ----------- ----------- ------ ----------- -------------------- "
-"----\n"
+"\n"
+"%6d regular files\n"
+"%6d directories\n"
+"%6d character device files\n"
+"%6d block device files\n"
+"%6d links\n"
+"%6d symbolic links\n"
+"------\n"
+"%6d files\n"
msgstr ""
-"-- ------- ----------- ----------- ------ ----------- -------------------- "
-"----\n"
+"\n"
+"%6d 標準檔案\n"
+"%6d 目錄\n"
+"%6d 字元裝置檔案\n"
+"%6d 區塊裝置檔案\n"
+"%6d 鏈結\n"
+"%6d 符號連結\n"
+"------\n"
+"%6d 檔案\n"
-#: fdisks/cfdisk.c:2051
-msgid " ---Starting---- ----Ending----- Start Number of\n"
-msgstr " ---開始--- ----結束----- 開始 數量\n"
+#: disk-utils/fsck.minix.c:1417
+#, c-format
+msgid ""
+"----------------------------\n"
+"FILE SYSTEM HAS BEEN CHANGED\n"
+"----------------------------\n"
+msgstr ""
+"----------------------------\n"
+"檔案系統已變更\n"
+"----------------------------\n"
-#: fdisks/cfdisk.c:2052
-msgid " # Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors\n"
-msgstr " # 旗標 磁頭 磁區 磁柱 ID 磁頭 磁區 磁柱 磁區 磁區數 \n"
+#: disk-utils/fsck.minix.c:1429 disk-utils/mkfs.minix.c:854
+#: disk-utils/mkswap.c:737 disk-utils/partx.c:1071 disk-utils/resizepart.c:115
+#: login-utils/utmpdump.c:408 sys-utils/dmesg.c:684 sys-utils/wdctl.c:457
+#: sys-utils/wdctl.c:536 term-utils/setterm.c:908 text-utils/col.c:195
+#: text-utils/pg.c:1255
+#, fuzzy
+msgid "write failed"
+msgstr "寫入失敗"
-#: fdisks/cfdisk.c:2053
-msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
+#: disk-utils/isosize.c:57
+#, c-format
+msgid "%s: might not be an ISO filesystem"
msgstr ""
-"-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
-#: fdisks/cfdisk.c:2090
-msgid "Raw"
-msgstr "原始"
+#: disk-utils/isosize.c:62 disk-utils/isosize.c:64
+#, fuzzy, c-format
+msgid "read error on %s"
+msgstr "讀取錯誤於 %s"
-#: fdisks/cfdisk.c:2090
-msgid "Print the table using raw data format"
-msgstr "用原始資料格式顯示分割表"
+#: disk-utils/isosize.c:75
+#, c-format
+msgid "sector count: %d, sector size: %d\n"
+msgstr "磁區數量：%d, 磁區大小：%d\n"
-#: fdisks/cfdisk.c:2091 fdisks/cfdisk.c:2194 libfdisk/src/sgi.c:279
-msgid "Sectors"
-msgstr "磁區"
+#: disk-utils/isosize.c:99
+#, fuzzy, c-format
+msgid " %s [options] <iso9660_image_file> ...\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [選項] iso9660_image_file\n"
-#: fdisks/cfdisk.c:2091
-msgid "Print the table ordered by sectors"
-msgstr "用磁區數大小顯示分割表"
+#: disk-utils/isosize.c:103
+msgid "Show the length of an ISO-9660 filesystem.\n"
+msgstr ""
-#: fdisks/cfdisk.c:2092
-msgid "Table"
-msgstr "分割表"
+#: disk-utils/isosize.c:106
+msgid " -d, --divisor=<number> divide the amount of bytes by <number>\n"
+msgstr ""
-#: fdisks/cfdisk.c:2092
-msgid "Just print the partition table"
-msgstr "只顯示此分割表"
+#: disk-utils/isosize.c:107
+#, fuzzy
+msgid " -x, --sectors show sector count and size\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: fdisks/cfdisk.c:2093
-msgid "Don't print the table"
-msgstr "不顯示此分割表"
+#: disk-utils/isosize.c:138
+#, fuzzy
+msgid "invalid divisor argument"
+msgstr "無效的除數引數"
-#: fdisks/cfdisk.c:2121
-msgid "Help Screen for cfdisk"
-msgstr "cfdisk 的說明畫面"
+#: disk-utils/mkfs.bfs.c:75
+#, fuzzy, c-format
+msgid "Usage: %s [options] device [block-count]\n"
+msgstr "用法：%s [選項] 裝置 [block-count]\n"
-#: fdisks/cfdisk.c:2123
-msgid "This is cfdisk, a curses based disk partitioning program, which"
-msgstr "本程式 cfdisk，是一個以游標操作為基礎的硬碟分割程式，"
+#: disk-utils/mkfs.bfs.c:79
+msgid "Make an SCO bfs filesystem.\n"
+msgstr ""
-#: fdisks/cfdisk.c:2124
-msgid "allows you to create, delete and modify partitions on your hard"
-msgstr "可供您新增、刪除和修改硬碟中的分割區"
+#: disk-utils/mkfs.bfs.c:81
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Options:\n"
+" -N, --inodes=NUM specify desired number of inodes\n"
+" -V, --vname=NAME specify volume name\n"
+" -F, --fname=NAME specify file system name\n"
+" -v, --verbose explain what is being done\n"
+" -c this option is silently ignored\n"
+" -l this option is silently ignored\n"
+" --lock[=<mode>] use exclusive device lock (yes, no or nonblock)\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -N, --inodes=NUM 指定設想的 inodes 數量\n"
+" -V, --vname=名稱 指定卷冊名稱\n"
+" -F, --fname=名稱 指定檔案系統名稱\n"
+" -v, --verbose 解釋什麼正在是已完成\n"
+" -c 這個選項是寂靜的忽略\n"
+" -l 這個選項是寂靜的忽略\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -V 做為版本必須是只有選項\n"
+" -h, --help 顯示這份說明然後離開\n"
+"\n"
-#: fdisks/cfdisk.c:2125
-msgid "disk drive."
-msgstr "。"
+#: disk-utils/mkfs.bfs.c:146
+#, fuzzy
+msgid "invalid number of inodes"
+msgstr "無效的 inodes 數量"
-#: fdisks/cfdisk.c:2127
-msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
-msgstr "著作權©1994-1999 Kevin E.Martin & aeb"
+#: disk-utils/mkfs.bfs.c:152
+msgid "volume name too long"
+msgstr "卷冊名稱太長"
-#: fdisks/cfdisk.c:2129
-msgid "Command Meaning"
-msgstr "æ\8c\89é\8dµå\91½ä»¤ æ\84\8f義"
+#: disk-utils/mkfs.bfs.c:159
+msgid "fsname name too long"
+msgstr "æª\94æ¡\88系統å\90\8d稱太é\95·"
-#: fdisks/cfdisk.c:2130
-msgid "------- -------"
-msgstr "------- -------"
+#: disk-utils/mkfs.bfs.c:209
+#, fuzzy
+msgid "invalid block-count"
+msgstr "無效的 block-count"
-#: fdisks/cfdisk.c:2131
-msgid " b Toggle bootable flag of the current partition"
-msgstr " b 切換目前分割區的開機屬性旗標"
+#: disk-utils/mkfs.bfs.c:217
+#, c-format
+msgid "cannot get size of %s"
+msgstr "無法取得 %s 的大小"
-#: fdisks/cfdisk.c:2132
-msgid " d Delete the current partition"
-msgstr " d 刪除目前的分割區"
+#: disk-utils/mkfs.bfs.c:222
+#, c-format
+msgid "blocks argument too large, max is %llu"
+msgstr "區塊引數太大，最大是 %llu"
-#: fdisks/cfdisk.c:2133
-msgid " g Change cylinders, heads, sectors-per-track parameters"
-msgstr " g 變更磁柱、磁頭、每一磁軌磁區數各項參數"
+#: disk-utils/mkfs.bfs.c:237
+msgid "too many inodes - max is 512"
+msgstr "太多 inodes - 最大為 512"
-#: fdisks/cfdisk.c:2134
-msgid " WARNING: This option should only be used by people who"
-msgstr " 警告: 此選項只適用於那些"
+#: disk-utils/mkfs.bfs.c:247
+#, c-format
+msgid "not enough space, need at least %llu blocks"
+msgstr "沒有足夠的空間，需要至少 %llu 區塊"
-#: fdisks/cfdisk.c:2135
-msgid " know what they are doing."
-msgstr " 知道他自己在做什麼的人。"
+#: disk-utils/mkfs.bfs.c:259
+#, c-format
+msgid "Device: %s\n"
+msgstr "裝置：%s\n"
-#: fdisks/cfdisk.c:2136
-msgid " h Print this screen"
-msgstr " h 顯示本說明畫面"
+#: disk-utils/mkfs.bfs.c:260
+#, c-format
+msgid "Volume: <%-6s>\n"
+msgstr "卷冊：<%-6s>\n"
-#: fdisks/cfdisk.c:2137
-msgid " m Maximize disk usage of the current partition"
-msgstr " m 將分割區的用量最大化"
+#: disk-utils/mkfs.bfs.c:261
+#, c-format
+msgid "FSname: <%-6s>\n"
+msgstr "檔案系統名稱：<%-6s>\n"
-#: fdisks/cfdisk.c:2138
-msgid " Note: This may make the partition incompatible with"
-msgstr " 注意: 這將使分割區不相容於"
+#: disk-utils/mkfs.bfs.c:262
+#, c-format
+msgid "BlockSize: %d\n"
+msgstr "區塊大小：%d\n"
-#: fdisks/cfdisk.c:2139
-msgid " DOS, OS/2, ..."
-msgstr " DOS, OS/2,…"
+#: disk-utils/mkfs.bfs.c:264
+#, fuzzy, c-format
+msgid "Inodes: %ld (in 1 block)\n"
+msgstr "Inodes：%lu (在中 1 區塊)\n"
-#: fdisks/cfdisk.c:2140
-msgid " n Create new partition from free space"
-msgstr " n 由剩餘空間中新增一塊分割區"
+#: disk-utils/mkfs.bfs.c:267
+#, fuzzy, c-format
+msgid "Inodes: %ld (in %llu blocks)\n"
+msgstr "Inodes：%lu (在中 %llu 區塊)\n"
-#: fdisks/cfdisk.c:2141
-msgid " p Print partition table to the screen or to a file"
-msgstr " p 顯示分割表於螢幕或輸出至檔案"
+#: disk-utils/mkfs.bfs.c:269
+#, fuzzy, c-format
+msgid "Blocks: %llu\n"
+msgstr "區塊：%lld\n"
-#: fdisks/cfdisk.c:2142
-msgid " There are several different formats for the partition"
-msgstr " 這裡有不同的分割區格式"
+#: disk-utils/mkfs.bfs.c:270
+#, c-format
+msgid "Inode end: %d, Data end: %d\n"
+msgstr "Inode 結束：%d, 資料結束：%d\n"
-#: fdisks/cfdisk.c:2143
-msgid " that you can choose from:"
-msgstr " 以下您可以選擇:"
+#: disk-utils/mkfs.bfs.c:275
+msgid "error writing superblock"
+msgstr "寫入超區塊時發生錯誤"
-#: fdisks/cfdisk.c:2144
-msgid " r - Raw data (exactly what would be written to disk)"
-msgstr " r - 原始資料 (和您寫入硬碟中的一樣)"
+#: disk-utils/mkfs.bfs.c:296
+msgid "error writing root inode"
+msgstr "寫入根 inode 時發生錯誤"
-#: fdisks/cfdisk.c:2145
-msgid " s - Table ordered by sectors"
-msgstr " s - 分割表以磁區數排列"
+#: disk-utils/mkfs.bfs.c:301
+msgid "error writing inode"
+msgstr "寫入 inode 時發生錯誤"
-#: fdisks/cfdisk.c:2146
-msgid " t - Table in raw format"
-msgstr " t - 分割表以原始格式顯示"
+#: disk-utils/mkfs.bfs.c:304
+msgid "seek error"
+msgstr "尋找錯誤"
-#: fdisks/cfdisk.c:2147
-msgid " q Quit program without writing partition table"
-msgstr " q 離開本程式並且不寫入分割表"
+#: disk-utils/mkfs.bfs.c:310
+msgid "error writing . entry"
+msgstr "寫入 . 項目時發生錯誤"
-#: fdisks/cfdisk.c:2148
-msgid " t Change the filesystem type"
-msgstr " t 變更檔案系統的類型"
+#: disk-utils/mkfs.bfs.c:314
+msgid "error writing .. entry"
+msgstr "寫入 .. 項目時發生錯誤"
-#: fdisks/cfdisk.c:2149
-msgid " u Change units of the partition size display"
-msgstr " u 變更分割區大小的顯示單位"
+#: disk-utils/mkfs.bfs.c:317
+#, c-format
+msgid "error closing %s"
+msgstr "關閉 %s 時發生錯誤"
-#: fdisks/cfdisk.c:2150
-msgid " Rotates through MB, sectors and cylinders"
-msgstr " 循環顯示 MB、磁區數和磁柱數"
+#: disk-utils/mkfs.c:45
+#, fuzzy, c-format
+msgid " %s [options] [-t <type>] [fs-options] <device> [<size>]\n"
+msgstr "用法：%s [選項] [-t 型態 fs-options] 裝置 [大小]\n"
-#: fdisks/cfdisk.c:2151
-msgid " W Write partition table to disk (must enter upper case W)"
-msgstr " W 寫入分割表 (寫入一定要用大寫 W)"
+#: disk-utils/mkfs.c:49
+#, fuzzy
+msgid "Make a Linux filesystem.\n"
+msgstr "檔案系統型態"
-#: fdisks/cfdisk.c:2152
-msgid " Since this might destroy data on the disk, you must"
-msgstr " 因為這將會使您的硬碟中的資料消失，您必須"
+#: disk-utils/mkfs.c:52
+#, c-format
+msgid " -t, --type=<type> filesystem type; when unspecified, ext2 is used\n"
+msgstr ""
-#: fdisks/cfdisk.c:2153
-msgid " either confirm or deny the write by entering `yes' or"
-msgstr " 明確地回答 'yes' 代表寫入，若不要寫入請回答"
+#: disk-utils/mkfs.c:53
+#, c-format
+msgid " fs-options parameters for the real filesystem builder\n"
+msgstr ""
-#: fdisks/cfdisk.c:2154
-msgid " `no'"
-msgstr " `no'"
+#: disk-utils/mkfs.c:54
+#, c-format
+msgid " <device> path to the device to be used\n"
+msgstr ""
-#: fdisks/cfdisk.c:2155
-msgid "Up Arrow Move cursor to the previous partition"
-msgstr "向上鍵 移動往上鍵可移至上一個分割區"
+#: disk-utils/mkfs.c:55
+#, c-format
+msgid " <size> number of blocks to be used on the device\n"
+msgstr ""
-#: fdisks/cfdisk.c:2156
-msgid "Down Arrow Move cursor to the next partition"
-msgstr "向下鍵 移動往下鍵可移至下一個分割區"
+#: disk-utils/mkfs.c:56
+#, c-format
+msgid ""
+" -V, --verbose explain what is being done;\n"
+" specifying -V more than once will cause a dry-run\n"
+msgstr ""
-#: fdisks/cfdisk.c:2157
-msgid "CTRL-L Redraws the screen"
-msgstr "CTRL-L 重新整理畫面(以免有殘影)"
+#: disk-utils/mkfs.c:133 include/c.h:310 login-utils/su-common.c:1290
+#: login-utils/sulogin.c:864 login-utils/sulogin.c:868 sys-utils/flock.c:123
+#: sys-utils/rtcwake.c:623
+#, c-format
+msgid "failed to execute %s"
+msgstr "執行 %s 時失敗"
-#: fdisks/cfdisk.c:2158
-msgid " ? Print this screen"
-msgstr " ? 顯示此畫面"
+#: disk-utils/mkfs.cramfs.c:129
+#, c-format
+msgid " %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
+msgstr ""
-#: fdisks/cfdisk.c:2160
-msgid "Note: All of the commands can be entered with either upper or lower"
-msgstr "注意: 以上所有的按鍵命令均不區分大小寫"
+#: disk-utils/mkfs.cramfs.c:132
+#, fuzzy
+msgid "Make compressed ROM file system."
+msgstr "檔案系統型態"
-#: fdisks/cfdisk.c:2161
-msgid "case letters (except for Writes)."
-msgstr "(除了 '寫入' 之外)。"
+#: disk-utils/mkfs.cramfs.c:134
+#, fuzzy
+msgid " -v be verbose"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisks/cfdisk.c:2192 libfdisk/src/sun.c:187
-msgid "Cylinders"
-msgstr "磁柱"
+#: disk-utils/mkfs.cramfs.c:135
+msgid " -E make all warnings errors (non-zero exit status)"
+msgstr ""
-#: fdisks/cfdisk.c:2192
-msgid "Change cylinder geometry"
-msgstr "變更磁柱結構"
+#: disk-utils/mkfs.cramfs.c:136
+msgid " -b blksize use this blocksize, must equal page size"
+msgstr ""
-#: fdisks/cfdisk.c:2193 libfdisk/src/sun.c:183
-msgid "Heads"
-msgstr "磁頭"
+#: disk-utils/mkfs.cramfs.c:137
+msgid " -e edition set edition number (part of fsid)"
+msgstr ""
-#: fdisks/cfdisk.c:2193
-msgid "Change head geometry"
-msgstr "變更磁頭結構"
+#: disk-utils/mkfs.cramfs.c:138
+#, c-format
+msgid " -N endian set cramfs endianness (%s|%s|%s), default %s\n"
+msgstr ""
-#: fdisks/cfdisk.c:2194
-msgid "Change sector geometry"
-msgstr "變更磁區結構"
+#: disk-utils/mkfs.cramfs.c:139
+#, fuzzy
+msgid " -i file insert a file image into the filesystem"
+msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
-#: fdisks/cfdisk.c:2195 fdisks/sfdisk.c:2969 fdisks/sfdisk.c:3030
-#: fdisks/sfdisk.c:3066
-msgid "Done"
-msgstr "完成"
+#: disk-utils/mkfs.cramfs.c:140
+#, fuzzy
+msgid " -n name set name of cramfs filesystem"
+msgstr "檢查所有檔案系統。\n"
-#: fdisks/cfdisk.c:2195
-msgid "Done with changing geometry"
-msgstr "變更結構完成"
+#: disk-utils/mkfs.cramfs.c:141
+#, fuzzy, c-format
+msgid " -p pad by %d bytes for boot code\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisks/cfdisk.c:2208
-msgid "Enter the number of cylinders: "
-msgstr "鍵入磁柱數: "
+#: disk-utils/mkfs.cramfs.c:142
+msgid " -s sort directory entries (old option, ignored)"
+msgstr ""
-#: fdisks/cfdisk.c:2219 fdisks/cfdisk.c:2812
-msgid "Illegal cylinders value"
-msgstr "磁柱數值不合法"
+#: disk-utils/mkfs.cramfs.c:143
+#, fuzzy
+msgid " -z make explicit holes"
+msgstr " -f 不分割長列\n"
-#: fdisks/cfdisk.c:2225
-msgid "Enter the number of heads: "
-msgstr "鍵入磁頭數字: "
+#: disk-utils/mkfs.cramfs.c:144
+#, fuzzy
+msgid " -l[=<mode>] use exclusive device lock (yes, no or nonblock)"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: fdisks/cfdisk.c:2232 fdisks/cfdisk.c:2822
-msgid "Illegal heads value"
-msgstr "磁頭數值不合法"
+#: disk-utils/mkfs.cramfs.c:145
+msgid " dirname root of the filesystem to be compressed"
+msgstr ""
-#: fdisks/cfdisk.c:2238
-msgid "Enter the number of sectors per track: "
-msgstr "鍵入每一磁軌的磁區數: "
+#: disk-utils/mkfs.cramfs.c:146
+msgid " outfile output file"
+msgstr ""
-#: fdisks/cfdisk.c:2245 fdisks/cfdisk.c:2829
-msgid "Illegal sectors value"
-msgstr "磁區數不合法"
+#: disk-utils/mkfs.cramfs.c:166
+#, fuzzy, c-format
+msgid "readlink failed: %s"
+msgstr "讀取失敗：%s"
-#: fdisks/cfdisk.c:2348
-msgid "Enter filesystem type: "
-msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+#: disk-utils/mkfs.cramfs.c:311
+#, fuzzy, c-format
+msgid "could not read directory %s"
+msgstr "無法讀取目錄 %s"
-#: fdisks/cfdisk.c:2366
-msgid "Cannot change FS Type to empty"
-msgstr "無法變更檔案系統類型為空"
+#: disk-utils/mkfs.cramfs.c:446
+#, fuzzy
+msgid "filesystem too big. Exiting."
+msgstr "檔案系統太大。 離開。"
-#: fdisks/cfdisk.c:2368
-msgid "Cannot change FS Type to extended"
-msgstr "無法變更檔案系統類型為擴展的"
+#: disk-utils/mkfs.cramfs.c:605
+#, c-format
+msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
+msgstr "AIEEE：區塊「被壓縮」到 > 2*區塊長度 (%ld)\n"
-#: fdisks/cfdisk.c:2399
+#: disk-utils/mkfs.cramfs.c:624
#, c-format
-msgid "Unk(%02X)"
-msgstr "Unk(%02X)"
+msgid "%6.2f%% (%+ld bytes)\t%s\n"
+msgstr "%6.2f%% (%+ld 位元組)\t%s\n"
+
+#: disk-utils/mkfs.cramfs.c:669
+#, fuzzy, c-format
+msgid "cannot close file %s"
+msgstr "無法關閉檔案 %s"
+
+#: disk-utils/mkfs.cramfs.c:747
+#, fuzzy
+msgid "invalid edition number argument"
+msgstr "無效的分割區編號引數"
-#: fdisks/cfdisk.c:2402 fdisks/cfdisk.c:2405
-msgid ", NC"
-msgstr ", NC"
+#: disk-utils/mkfs.cramfs.c:757
+#, fuzzy
+msgid "invalid endianness given; must be 'big', 'little', or 'host'"
+msgstr "無效的尾序給定的。必須是『大』，『小型』，或『主機』"
-#: fdisks/cfdisk.c:2410 fdisks/cfdisk.c:2413
-msgid "NC"
-msgstr "NC"
+#: disk-utils/mkfs.cramfs.c:833
+#, fuzzy, c-format
+msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely."
+msgstr "警告：guestimate 的必要項大小 (上限) 是 %lldMB，但是最大值影像大小是 %uMB。 我們也許消滅過早。"
-#: fdisks/cfdisk.c:2421
-msgid "Pri/Log"
-msgstr "主要/邏輯"
+#: disk-utils/mkfs.cramfs.c:857
+msgid "ROM image map"
+msgstr "唯讀記憶體圖像映射"
-#: fdisks/cfdisk.c:2428
+#: disk-utils/mkfs.cramfs.c:869
#, c-format
-msgid "Unknown (%02X)"
-msgstr "未知的 (%02X)"
+msgid "Including: %s\n"
+msgstr "包含：%s\n"
-#: fdisks/cfdisk.c:2497
+#: disk-utils/mkfs.cramfs.c:875
#, c-format
-msgid "Disk Drive: %s"
-msgstr "硬ç¢\9f: %s"
+msgid "Directory data: %zd bytes\n"
+msgstr "ç\9b®é\8c\84è³\87æ\96\99ï¼\9a%zd ä½\8då\85\83çµ\84\n"
-#: fdisks/cfdisk.c:2504
+#: disk-utils/mkfs.cramfs.c:883
#, c-format
-msgid "Size: %lld bytes, %lld MB"
-msgstr "大小: %lld 位元組, %lld MB"
+msgid "Everything: %zd kilobytes\n"
+msgstr "所有東西：%zd 千位元組\n"
-#: fdisks/cfdisk.c:2507
+#: disk-utils/mkfs.cramfs.c:888
#, c-format
-msgid "Size: %lld bytes, %lld.%lld GB"
-msgstr "大小: %lld 位元組, %lld.%lld GB"
+msgid "Super block: %zd bytes\n"
+msgstr "超區塊：%zd 位元組\n"
-#: fdisks/cfdisk.c:2511
+#: disk-utils/mkfs.cramfs.c:895
#, c-format
-msgid "Heads: %d Sectors per Track: %d Cylinders: %lld"
-msgstr "磁頭數: %d 每一磁軌的磁區數: %d 磁柱數: %lld"
+msgid "CRC: %x\n"
+msgstr "CRC：%x\n"
-#: fdisks/cfdisk.c:2515 libfdisk/src/gpt.c:1207 libfdisk/src/sgi.c:335
-#: login-utils/chfn.c:235 login-utils/chfn.c:315
-msgid "Name"
-msgstr "名稱"
+#: disk-utils/mkfs.cramfs.c:900
+#, fuzzy, c-format
+msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
+msgstr "不足空格配置的用於唯讀記憶體影像 (%lld 配置，%zu 使用)"
-#: fdisks/cfdisk.c:2516
-msgid "Flags"
-msgstr "屬性旗標"
+#: disk-utils/mkfs.cramfs.c:906
+#, fuzzy, c-format
+msgid "ROM image write failed (%zd %zd)"
+msgstr "唯讀記憶體影像寫入失敗 (%zd %zd)"
-#: fdisks/cfdisk.c:2517
-msgid "Part Type"
-msgstr "å\88\86å\89²å\8d\80é¡\9eå\9e\8b"
+#: disk-utils/mkfs.cramfs.c:909
+msgid "ROM image"
+msgstr "å\94¯è®\80è¨\98æ\86¶é«\94æ\98 å\83\8f"
-#: fdisks/cfdisk.c:2518
-msgid "FS Type"
-msgstr "檔案系統類型"
+#: disk-utils/mkfs.cramfs.c:918
+#, fuzzy, c-format
+msgid "warning: filenames truncated to %u bytes."
+msgstr "警告：檔名截短至 255 位元組。"
-#: fdisks/cfdisk.c:2519
-msgid "[Label]"
-msgstr "[標記名稱]"
+#: disk-utils/mkfs.cramfs.c:920
+#, fuzzy
+msgid "warning: files were skipped due to errors."
+msgstr "警告：檔案被略過由於錯誤。"
-#: fdisks/cfdisk.c:2521
-msgid " Sectors"
-msgstr " 磁區"
+#: disk-utils/mkfs.cramfs.c:922
+#, fuzzy, c-format
+msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
+msgstr "警告：檔案大小截短至 %luMB (minus 1 位元組)。"
-#: fdisks/cfdisk.c:2523
-msgid " Cylinders"
-msgstr " 磁柱"
+#: disk-utils/mkfs.cramfs.c:926
+#, fuzzy, c-format
+msgid "warning: uids truncated to %u bits. (This may be a security concern.)"
+msgstr "警告：uids 截短至 %u 位元。 (這也許會是安全上的考量.)"
-#: fdisks/cfdisk.c:2525
-msgid " Size (MB)"
-msgstr " 大小 (MB)"
+#: disk-utils/mkfs.cramfs.c:929
+#, fuzzy, c-format
+msgid "warning: gids truncated to %u bits. (This may be a security concern.)"
+msgstr "警告：gids 截短至 %u 位元。 (這也許會是安全上的考量.)"
-#: fdisks/cfdisk.c:2527
-msgid " Size (GB)"
-msgstr " 大小 (GB)"
+#: disk-utils/mkfs.cramfs.c:932
+#, fuzzy, c-format
+msgid ""
+"WARNING: device numbers truncated to %u bits. This almost certainly means\n"
+"that some device files will be wrong."
+msgstr ""
+"警告：裝置編號截短至 %u 位元。 這個幾乎某些表示\n"
+"該某些裝置檔案將是錯誤的。"
-#: fdisks/cfdisk.c:2549
-msgid "No more partitions"
-msgstr "已無多餘的分割區"
+#: disk-utils/mkfs.minix.c:139
+#, fuzzy, c-format
+msgid " %s [options] /dev/name [blocks]\n"
+msgstr "用法：%s [選項] 裝置 [block-count]\n"
-#: fdisks/cfdisk.c:2582
-msgid "Bootable"
-msgstr "可開機"
+#: disk-utils/mkfs.minix.c:141
+#, fuzzy
+msgid " -1 use Minix version 1\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: fdisks/cfdisk.c:2582
-msgid "Toggle bootable flag of the current partition"
-msgstr "切換目前分割區的屬性旗標"
+#: disk-utils/mkfs.minix.c:142
+#, fuzzy
+msgid " -2, -v use Minix version 2\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: fdisks/cfdisk.c:2583
-msgid "Delete"
-msgstr "刪除"
+#: disk-utils/mkfs.minix.c:143
+#, fuzzy
+msgid " -3 use Minix version 3\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: fdisks/cfdisk.c:2583
-msgid "Delete the current partition"
-msgstr "刪除目前的分割區"
+#: disk-utils/mkfs.minix.c:144
+#, fuzzy
+msgid " -n, --namelength <num> maximum length of filenames\n"
+msgstr "剖析列號的時失敗"
-#: fdisks/cfdisk.c:2584 fdisks/fdisk-menu.c:138
-msgid "Geometry"
-msgstr "結構"
+#: disk-utils/mkfs.minix.c:145
+#, fuzzy
+msgid " -i, --inodes <num> number of inodes for the filesystem\n"
+msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
-#: fdisks/cfdisk.c:2584
-msgid "Change disk geometry (experts only)"
-msgstr "變更磁碟結構 (老手適用)"
+#: disk-utils/mkfs.minix.c:146
+#, fuzzy
+msgid " -c, --check check the device for bad blocks\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: fdisks/cfdisk.c:2585
-msgid "Help"
-msgstr "求助"
+#: disk-utils/mkfs.minix.c:147
+msgid " -l, --badblocks <file> list of bad blocks from file\n"
+msgstr ""
-#: fdisks/cfdisk.c:2585
-msgid "Print help screen"
-msgstr "顯示說明畫面"
+#: disk-utils/mkfs.minix.c:149
+#, fuzzy, c-format
+msgid " --lock[=<mode>] use exclusive device lock (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: fdisks/cfdisk.c:2586
-msgid "Maximize"
-msgstr "最大化"
+#: disk-utils/mkfs.minix.c:192
+#, fuzzy, c-format
+msgid "%s: seek to boot block failed in write_tables"
+msgstr "%s：尋指到啟動區段失敗 在中 writetables(_T)"
-#: fdisks/cfdisk.c:2586
-msgid "Maximize disk usage of the current partition (experts only)"
-msgstr "使目前的分割區的磁碟使用最大化 (老手適用)"
+#: disk-utils/mkfs.minix.c:195
+#, fuzzy, c-format
+msgid "%s: unable to clear boot sector"
+msgstr "%s：無法清空開機磁區"
-#: fdisks/cfdisk.c:2587
-msgid "New"
-msgstr "新增"
+#: disk-utils/mkfs.minix.c:197
+#, fuzzy, c-format
+msgid "%s: seek failed in write_tables"
+msgstr "%s：尋指失敗的在中 writetables(_T)"
-#: fdisks/cfdisk.c:2587
-msgid "Create new partition from free space"
-msgstr "從剩餘空間新增一個新的分割區"
+#: disk-utils/mkfs.minix.c:200
+#, fuzzy, c-format
+msgid "%s: unable to write super-block"
+msgstr "%s：無法寫入超區塊"
-#: fdisks/cfdisk.c:2588
-msgid "Print"
-msgstr "印出"
+#: disk-utils/mkfs.minix.c:203
+#, fuzzy, c-format
+msgid "%s: unable to write inode map"
+msgstr "%s：無法寫入 inode 映射"
-#: fdisks/cfdisk.c:2588
-msgid "Print partition table to the screen or to a file"
-msgstr "印出分割表至螢幕或檔案"
+#: disk-utils/mkfs.minix.c:206
+#, fuzzy, c-format
+msgid "%s: unable to write zone map"
+msgstr "%s：無法寫入區映射"
-#: fdisks/cfdisk.c:2589
-msgid "Quit"
-msgstr "離開"
+#: disk-utils/mkfs.minix.c:209
+#, fuzzy, c-format
+msgid "%s: unable to write inodes"
+msgstr "%s：無法寫入 inodes"
-#: fdisks/cfdisk.c:2589
-msgid "Quit program without writing partition table"
-msgstr "離開本程式且不寫入分割表"
+#: disk-utils/mkfs.minix.c:214
+#, fuzzy, c-format
+msgid "%s: seek failed in write_block"
+msgstr "%s：尋指失敗的在中 writeblock(_B)"
-#: fdisks/cfdisk.c:2590 libfdisk/src/bsd.c:397 libfdisk/src/gpt.c:1203
-msgid "Type"
-msgstr "類型"
+#: disk-utils/mkfs.minix.c:217
+#, fuzzy, c-format
+msgid "%s: write failed in write_block"
+msgstr "%s：寫入失敗的在中 writeblock(_B)"
-#: fdisks/cfdisk.c:2590
-msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
-msgstr "變更檔案系統的類型 (DOS, Linux, swap, OS/2 等等)"
+#: disk-utils/mkfs.minix.c:226 disk-utils/mkfs.minix.c:301
+#: disk-utils/mkfs.minix.c:350
+#, fuzzy, c-format
+msgid "%s: too many bad blocks"
+msgstr "%s：太多不當的區塊"
-#: fdisks/cfdisk.c:2591
-msgid "Units"
-msgstr "單位"
+#: disk-utils/mkfs.minix.c:234
+#, fuzzy, c-format
+msgid "%s: not enough good blocks"
+msgstr "%s：不足良好區塊"
-#: fdisks/cfdisk.c:2591
-msgid "Change units of the partition size display (MB, sect, cyl)"
-msgstr "變更分割區大小的顯示單位 (用 MB、磁區數或磁柱數)"
+#: disk-utils/mkfs.minix.c:549
+#, c-format
+msgid ""
+"First data block at %jd, which is too far (max %d).\n"
+"Try specifying fewer inodes by passing --inodes <num>"
+msgstr ""
-#: fdisks/cfdisk.c:2592
-msgid "Write"
-msgstr "寫入"
+#: disk-utils/mkfs.minix.c:569
+#, fuzzy, c-format
+msgid "%lu inode\n"
+msgid_plural "%lu inodes\n"
+msgstr[0] "%lu inodes\n"
-#: fdisks/cfdisk.c:2592
-msgid "Write partition table to disk (this might destroy data)"
-msgstr "寫入分割表至硬碟中 (可能使該分割區中的資料消失!)"
+#: disk-utils/mkfs.minix.c:570
+#, fuzzy, c-format
+msgid "%lu block\n"
+msgid_plural "%lu blocks\n"
+msgstr[0] "%lu 區塊\n"
+
+#: disk-utils/mkfs.minix.c:573
+#, fuzzy, c-format
+msgid "Zonesize=%zu\n"
+msgstr "區域大小=%d\n"
-#: fdisks/cfdisk.c:2639
-msgid "Cannot make this partition bootable"
-msgstr "無法讓這個分割區變成可開機"
+#: disk-utils/mkfs.minix.c:574
+#, fuzzy, c-format
+msgid ""
+"Maxsize=%zu\n"
+"\n"
+msgstr ""
+"最大容量=%ld\n"
+"\n"
-#: fdisks/cfdisk.c:2649
-msgid "Cannot delete an empty partition"
-msgstr "無法刪除一個空的分割區"
+#: disk-utils/mkfs.minix.c:587
+#, fuzzy, c-format
+msgid "%s: seek failed during testing of blocks"
+msgstr "%s：尋指失敗的在的期間測試的區塊"
-#: fdisks/cfdisk.c:2669 fdisks/cfdisk.c:2671
-msgid "Cannot maximize this partition"
-msgstr "無法將這個分割區最大化"
+#: disk-utils/mkfs.minix.c:594
+#, c-format
+msgid "Weird values in do_check: probably bugs\n"
+msgstr "do_check 中出現異常值：可能錯誤\n"
-#: fdisks/cfdisk.c:2679
-msgid "This partition is unusable"
-msgstr "這個分割區無法使用"
+#: disk-utils/mkfs.minix.c:627
+#, fuzzy, c-format
+msgid "%s: seek failed in check_blocks"
+msgstr "%s：尋指失敗的在中 checkblocks(_B)"
-#: fdisks/cfdisk.c:2681
-msgid "This partition is already in use"
-msgstr "這個分割區已在使用中"
+#: disk-utils/mkfs.minix.c:637
+#, fuzzy, c-format
+msgid "%s: bad blocks before data-area: cannot make fs"
+msgstr "%s：不當的區塊之前 data-area：無法製作 fs"
-#: fdisks/cfdisk.c:2698
-msgid "Cannot change the type of an empty partition"
-msgstr "無法變更一個空分割區的類型"
+#: disk-utils/mkfs.minix.c:644 disk-utils/mkfs.minix.c:668
+#, fuzzy, c-format
+msgid "%d bad block\n"
+msgid_plural "%d bad blocks\n"
+msgstr[0] "%d 個不良區塊\n"
-#: fdisks/cfdisk.c:2742
-msgid "Illegal command"
-msgstr "無效的命令"
+#: disk-utils/mkfs.minix.c:653
+#, fuzzy, c-format
+msgid "%s: can't open file of bad blocks"
+msgstr "%s：無法開啟檔案的不當的區塊"
-#: fdisks/cfdisk.c:2752
+#: disk-utils/mkfs.minix.c:658
#, c-format
-msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
-msgstr "版權©1994-2002 Kevin E. Martin & aeb\n"
+msgid "badblock number input error on line %d\n"
+msgstr "損壞區塊編號輸入錯誤於第 %d 列\n"
-#: fdisks/cfdisk.c:2759
+#: disk-utils/mkfs.minix.c:659
#, fuzzy, c-format
-msgid " %s [options] device\n"
-msgstr " %s [選項] <device>\n"
+msgid "%s: cannot read badblocks file"
+msgstr "%s：無法讀取 badblocks 檔案"
+
+#: disk-utils/mkfs.minix.c:699
+#, c-format
+msgid "block size smaller than physical sector size of %s"
+msgstr "區段大小小於 %s 的實體磁區大小"
-#: fdisks/cfdisk.c:2761
+#: disk-utils/mkfs.minix.c:702 disk-utils/mkswap.c:349
+#, c-format
+msgid "cannot determine size of %s"
+msgstr "無法決定 %s 的大小"
+
+#: disk-utils/mkfs.minix.c:710
+#, c-format
+msgid "%s: requested blocks (%llu) exceeds available (%llu) blocks\n"
+msgstr ""
+
+#: disk-utils/mkfs.minix.c:713
+#, fuzzy, c-format
+msgid "%s: number of blocks too small"
+msgstr "%s：區塊數量太小"
+
+#: disk-utils/mkfs.minix.c:728 disk-utils/mkfs.minix.c:734
+#, fuzzy, c-format
+msgid "unsupported name length: %d"
+msgstr "不受支援的引數：%s"
+
+#: disk-utils/mkfs.minix.c:737
+#, fuzzy, c-format
+msgid "unsupported minix file system version: %d"
+msgstr "不受支援的檔案系統特徵"
+
+#: disk-utils/mkfs.minix.c:778
+msgid "-v is ambiguous, use '-2' instead"
+msgstr ""
+
+#: disk-utils/mkfs.minix.c:789
#, fuzzy
-msgid " -c, --cylinders <number> set the number of cylinders to use\n"
-msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量"
+msgid "failed to parse maximum length of filenames"
+msgstr "剖析列號的時失敗"
-#: fdisks/cfdisk.c:2762
+#: disk-utils/mkfs.minix.c:793
#, fuzzy
-msgid " -h, --heads <number> set the number of heads to use\n"
-msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+msgid "failed to parse number of inodes"
+msgstr "剖析列號的時失敗"
-#: fdisks/cfdisk.c:2763
+#: disk-utils/mkfs.minix.c:824
#, fuzzy
-msgid " -s, --sectors <number> set the number of sectors to use\n"
-msgstr " -S# [或 --sectors #]： 設定要用的磁區數量"
+msgid "failed to parse number of blocks"
+msgstr "剖析列號的時失敗"
+
+#: disk-utils/mkfs.minix.c:832
+#, c-format
+msgid "%s is mounted; will not make a filesystem here!"
+msgstr "%s 已掛載；在此將無法製作檔案系統！"
-#: fdisks/cfdisk.c:2764
+#: disk-utils/mkswap.c:111
+#, fuzzy, c-format
+msgid "Bad user-specified page size %u"
+msgstr "不當的使用者指定的頁面大小 %u"
+
+#: disk-utils/mkswap.c:114
+#, fuzzy, c-format
+msgid "Using user-specified page size %d, instead of the system value %d"
+msgstr "使用使用者指定的頁面大小 %d，以代替系統值 %d"
+
+#: disk-utils/mkswap.c:156
#, fuzzy
-msgid " -g, --guess guess a geometry from partition table\n"
-msgstr " -s, --status 查詢印表機狀態\n"
+msgid "Label was truncated."
+msgstr "標貼被截斷。"
+
+#: disk-utils/mkswap.c:164
+#, c-format
+msgid "no label, "
+msgstr "無標籤，"
+
+#: disk-utils/mkswap.c:172
+#, c-format
+msgid "no uuid\n"
+msgstr "沒有 uuid\n"
+
+#: disk-utils/mkswap.c:181
+#, fuzzy, c-format
+msgid " %s [options] device [size]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [選項] 裝置 [大小]\n"
+
+#: disk-utils/mkswap.c:184
+msgid "Set up a Linux swap area.\n"
+msgstr ""
-#: fdisks/cfdisk.c:2765
+#: disk-utils/mkswap.c:187
#, fuzzy
-msgid " -P, --print <r|s|t> print partition table in specified format\n"
-msgstr " p 顯示分割表於螢幕或輸出至檔案"
+msgid " -c, --check check bad blocks before creating the swap area\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: fdisks/cfdisk.c:2766
+#: disk-utils/mkswap.c:188
#, fuzzy
-msgid " -z, --zero start with zeroed partition table\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+msgid " -f, --force allow swap size area be larger than device\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: fdisks/cfdisk.c:2767
+#: disk-utils/mkswap.c:189
#, fuzzy
-msgid ""
-" -a, --arrow use arrow for highlighting the current partition\n"
-msgstr " d 刪除目前的分割區"
+msgid " -q, --quiet suppress output and warning messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: fdisks/cfdisk.c:2769
+#: disk-utils/mkswap.c:190
#, fuzzy
-msgid " --help display this help and exit\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+msgid " -p, --pagesize SIZE specify page size in bytes\n"
+msgstr " -l, --limits 顯示資源限度\n"
-#: fdisks/cfdisk.c:2810
+#: disk-utils/mkswap.c:191
#, fuzzy
-msgid "cannot parse number of cylinders"
-msgstr "無法剖析磁柱數量"
+msgid " -L, --label LABEL specify label\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/cfdisk.c:2820
+#: disk-utils/mkswap.c:192
#, fuzzy
-msgid "cannot parse number of heads"
-msgstr "無法剖析前端數量"
+msgid " -v, --swapversion NUM specify swap-space version number\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/cfdisk.c:2827
+#: disk-utils/mkswap.c:193
#, fuzzy
-msgid "cannot parse number of sectors"
-msgstr "無法剖析磁區數量"
+msgid " -U, --uuid UUID specify the uuid to use\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/fdisk-ask.c:29
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Do you really want to quit? "
-msgstr "您真的要離開嗎？"
+#: disk-utils/mkswap.c:195
+#, c-format
+msgid " -e, --endianness=<value> specify the endianness to use (%s, %s or %s)\n"
+msgstr ""
-#: fdisks/fdisk-ask.c:74
-#, fuzzy, c-format
-msgid "%s (%s, default %c): "
-msgstr "%s (%u-%u, 預設 %u)："
+#: disk-utils/mkswap.c:197
+#, fuzzy
+msgid " --verbose verbose output\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisks/fdisk-ask.c:77 fdisks/fdisk-ask.c:143
+#: disk-utils/mkswap.c:200 disk-utils/sfdisk.c:2088
#, fuzzy, c-format
-msgid "%s (%s, default %jd): "
-msgstr "%s (%u-%u, 預設 %u)："
+msgid " --lock[=<mode>] use exclusive device lock (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: fdisks/fdisk-ask.c:82
+#: disk-utils/mkswap.c:214
#, fuzzy, c-format
-msgid "%s (%c-%c, default %c): "
-msgstr "%s (%u-%u, 預設 %u)："
+msgid "too many bad pages: %lu"
+msgstr "太多不良頁面"
-#: fdisks/fdisk-ask.c:85 fdisks/fdisk-ask.c:145
-#, fuzzy, c-format
-msgid "%s (%jd-%jd, default %jd): "
-msgstr "%s (%u-%u, 預設 %u)："
+#: disk-utils/mkswap.c:235
+msgid "seek failed in check_blocks"
+msgstr "在 check_blocks 中的尋找失敗"
-#: fdisks/fdisk-ask.c:88
+#: disk-utils/mkswap.c:245
#, fuzzy, c-format
-msgid "%s (%c-%c): "
-msgstr "%s (%s)\n"
+msgid "%lu bad page\n"
+msgid_plural "%lu bad pages\n"
+msgstr[0] "%lu 個不良頁面\n"
-#: fdisks/fdisk-ask.c:91 fdisks/fdisk-ask.c:147
+#: disk-utils/mkswap.c:257
#, c-format
-msgid "%s (%jd-%jd): "
+msgid ""
+"mkswap: %s contains holes or other unsupported extents.\n"
+" This swap file can be rejected by kernel on swap activation!\n"
msgstr ""
-#: fdisks/fdisk-ask.c:118 fdisks/fdisk-ask.c:189
-#, fuzzy
-msgid "Value out of range."
-msgstr "數值超出範圍。\n"
+#: disk-utils/mkswap.c:265
+#, fuzzy, c-format
+msgid " Use --verbose for more details.\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisks/fdisk-ask.c:214
-msgid ": "
+#: disk-utils/mkswap.c:306 disk-utils/mkswap.c:331
+#, c-format
+msgid "hole detected at offset %ju"
msgstr ""
-#: fdisks/fdisk-ask.c:277
-msgid " [Y]es/[N]o: "
+#: disk-utils/mkswap.c:314
+#, c-format
+msgid "data inline extent at offset %ju"
msgstr ""
-#: fdisks/fdisk-ask.c:298
+#: disk-utils/mkswap.c:317
#, c-format
-msgid "internal error: unsupported dialog type %d"
+msgid "shared extent at offset %ju"
msgstr ""
-#: fdisks/fdisk-ask.c:312
-#, fuzzy
-msgid "Partition type (type L to list all types): "
-msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-
-#: fdisks/fdisk-ask.c:313
-#, fuzzy
-msgid "Hex code (type L to list all codes): "
-msgstr "十六進位編碼 (輸入 L 以列出編碼)："
-
-#: fdisks/fdisk.c:53
+#: disk-utils/mkswap.c:320
#, c-format
-msgid ""
-" %1$s [options] <disk> change partition table\n"
-" %1$s [options] -l <disk> list partition table(s)\n"
+msgid "unallocated extent at offset %ju"
msgstr ""
-#: fdisks/fdisk.c:58
-msgid " -b <size> sector size (512, 1024, 2048 or 4096)\n"
-msgstr ""
+#: disk-utils/mkswap.c:361
+msgid "unable to alloc new libblkid probe"
+msgstr "無法配置新的 libblkid 探針"
+
+#: disk-utils/mkswap.c:363
+msgid "unable to assign device to libblkid probe"
+msgstr "無法指派裝置給 libblkid 探針"
-#: fdisks/fdisk.c:59 fdisks/fdisk.c:61
-msgid " -c[=<mode>] compatible mode: 'dos' or 'nondos' (default)\n"
+#: disk-utils/mkswap.c:385
+#, c-format
+msgid "warning: checking bad blocks from swap file is not supported: %s"
msgstr ""
-#: fdisks/fdisk.c:60
-#, fuzzy
-msgid " -h print this help text\n"
-msgstr " -h 顯示這份說明然後離開\n"
+#: disk-utils/mkswap.c:400 disk-utils/mkswap.c:425 disk-utils/mkswap.c:473
+msgid "unable to rewind swap-device"
+msgstr "無法倒轉交換裝置"
-#: fdisks/fdisk.c:62
-msgid " -L[=<when>] colorize output (auto, always or never)\n"
-msgstr ""
+#: disk-utils/mkswap.c:428
+msgid "unable to erase bootbits sectors"
+msgstr "無法清除開機磁區"
-#: fdisks/fdisk.c:63
-msgid " -u[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
+#: disk-utils/mkswap.c:445
+#, c-format
+msgid "%s: warning: wiping old %s signature."
msgstr ""
-#: fdisks/fdisk.c:64
-#, fuzzy
-msgid " -v print program version\n"
-msgstr " -a, --all 查詢所有原始裝置\n"
+#: disk-utils/mkswap.c:450
+#, fuzzy, c-format
+msgid "%s: warning: don't erase bootbits sectors"
+msgstr "%s：警告：不清除 bootbits 磁區"
-#: fdisks/fdisk.c:65
-#, fuzzy
-msgid " -C <number> specify the number of cylinders\n"
-msgstr "鍵入磁柱數: "
+#: disk-utils/mkswap.c:453
+#, c-format
+msgid " (%s partition table detected). "
+msgstr " (偵測到 %s 分割表)。"
-#: fdisks/fdisk.c:66
-#, fuzzy
-msgid " -H <number> specify the number of heads\n"
-msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+#: disk-utils/mkswap.c:455
+#, c-format
+msgid " (compiled without libblkid). "
+msgstr " (編譯時未支援 libblkid)。"
-#: fdisks/fdisk.c:67
-#, fuzzy
-msgid " -S <number> specify the number of sectors per track\n"
-msgstr "鍵入每一磁軌的磁區數: "
+#: disk-utils/mkswap.c:456
+#, fuzzy, c-format
+msgid "Use -f to force.\n"
+msgstr " -f 強制檢查\n"
+
+#: disk-utils/mkswap.c:478
+#, fuzzy, c-format
+msgid "%s: unable to write signature page"
+msgstr "%s：無法寫入簽名頁面"
-#: fdisks/fdisk.c:150
+#: disk-utils/mkswap.c:536
#, fuzzy
-msgid "DOS Compatibility flag is set (DEPRECATED!)"
-msgstr "DOS 相容性旗標已設定 (不宜再用！)\n"
+msgid "parsing page size failed"
+msgstr "剖析頁面大小失敗"
-#: fdisks/fdisk.c:151
+#: disk-utils/mkswap.c:545
#, fuzzy
-msgid "DOS Compatibility flag is not set"
-msgstr "DOS 相容性旗標未設定\n"
+msgid "parsing version number failed"
+msgstr "剖析版本編號失敗"
-#: fdisks/fdisk.c:172
+#: disk-utils/mkswap.c:548
#, fuzzy, c-format
-msgid "Partition %zu does not exist yet!"
-msgstr "分割區 %d 尚不存在！\n"
+msgid "swapspace version %d is not supported"
+msgstr "速度 %d 不受支援"
-#: fdisks/fdisk.c:180
+#: disk-utils/mkswap.c:554
#, fuzzy, c-format
-msgid "Changed type of partition '%s' to '%s'."
-msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n"
+msgid "warning: ignoring -U (UUIDs are unsupported by %s)"
+msgstr "警告：忽略 -U (UUIDs 被不受支援的由 %s)"
-#: fdisks/fdisk.c:185
+#: disk-utils/mkswap.c:567
#, fuzzy, c-format
-msgid "Type of partition %zu is unchanged: %s."
-msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
+msgid "invalid endianness %s is not supported"
+msgstr "速度 %d 不受支援"
-#: fdisks/fdisk.c:201
-#, fuzzy, c-format
-msgid "Disk %s: %s, %llu bytes, %llu sectors"
+#: disk-utils/mkswap.c:596
+msgid "only one device argument is currently supported"
msgstr ""
-"\n"
-"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: fdisks/fdisk.c:206
-#, fuzzy, c-format
-msgid "Geometry: %d heads, %llu sectors/track, %llu cylinders"
-msgstr "%d 前端，%llu 磁區/軌段，%llu 磁柱\n"
+#: disk-utils/mkswap.c:609
+#, fuzzy
+msgid "error: parsing UUID failed"
+msgstr "錯誤：UUID 剖析失敗"
-#: fdisks/fdisk.c:209
-#, fuzzy, c-format
-msgid "Units: %s of %d * %ld = %ld bytes"
-msgstr "單位=%s 的 %d * %ld=%ld 位元組\n"
+#: disk-utils/mkswap.c:618
+#, fuzzy
+msgid "error: Nowhere to set up swap on?"
+msgstr "錯誤：無處可設置交換於？"
+
+#: disk-utils/mkswap.c:624
+#, fuzzy
+msgid "invalid block count argument"
+msgstr "無效的區塊計數引數"
-#: fdisks/fdisk.c:215
+#: disk-utils/mkswap.c:633
#, fuzzy, c-format
-msgid "Sector size (logical/physical): %lu bytes / %lu bytes"
-msgstr "磁區大小 (邏輯的/實體)：%lu 位元組/%lu 位元組\n"
+msgid "error: size %llu KiB is larger than device size %<PRIu64> KiB"
+msgstr "錯誤：大小 %llu KiB 是大於裝置大小 %llu KiB"
-#: fdisks/fdisk.c:217
+#: disk-utils/mkswap.c:639
#, fuzzy, c-format
-msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes"
-msgstr "I/O 大小 (最小/最佳化)：%lu 位元組 / %lu 位元組\n"
+msgid "error: swap area needs to be at least %ld KiB"
+msgstr "錯誤：交換區域需要是至少 %ld KiB"
-#: fdisks/fdisk.c:220
+#: disk-utils/mkswap.c:645
#, fuzzy, c-format
-msgid "Alignment offset: %lu bytes"
-msgstr "對齊偏移值：%lu 位元組\n"
+msgid "warning: truncating swap area to %llu KiB"
+msgstr "警告：截斷交換區域到 %llu KiB"
-#: fdisks/fdisk.c:223
+#: disk-utils/mkswap.c:650
#, fuzzy, c-format
-msgid "Disk label type: %s"
-msgstr "硬碟: %s\n"
+msgid "error: %s is mounted; will not make swapspace"
+msgstr "錯誤：%s 被掛載；將無法製作 swapspace。"
-#: fdisks/fdisk.c:226
+#: disk-utils/mkswap.c:657
#, fuzzy, c-format
-msgid "Disk identifier: %s"
-msgstr "磁碟識別碼：0x%08x\n"
+msgid "%s: insecure permissions %04o, fix with: chmod %04o %s"
+msgstr "%s：不安全的權限 %04o, 建議使用 %04o。"
-#: fdisks/fdisk.c:274
-#, c-format
-msgid ""
-"\n"
-"%s: offset = %ju, size = %zu bytes."
-msgstr ""
+#: disk-utils/mkswap.c:662
+#, fuzzy, c-format
+msgid "%s: insecure file owner %d, fix with: chown 0:0 %s"
+msgstr "%s：不安全檔案擁有者 %d，0 (根) 建議。"
-#: fdisks/fdisk.c:278
-#, fuzzy
-msgid "cannot seek"
-msgstr "無法衍生執行"
+#: disk-utils/mkswap.c:681
+msgid "Unable to set up swap-space: unreadable"
+msgstr "無法設置交換空間：無法讀取"
-#: fdisks/fdisk.c:283
-#, fuzzy
-msgid "cannot read"
-msgstr "無法讀取 %s"
+#: disk-utils/mkswap.c:687
+#, fuzzy, c-format
+msgid "Setting up swapspace version %d, size = %s (%<PRIu64> bytes)\n"
+msgstr "設定 swapspace 版本 1, 大小 = %llu KiB\n"
-#: fdisks/fdisk.c:297 libfdisk/src/bsd.c:215 libfdisk/src/dos.c:876
-#: libfdisk/src/gpt.c:1684
-#, fuzzy
-msgid "First sector"
-msgstr "起初 %s"
+#: disk-utils/mkswap.c:707
+#, fuzzy, c-format
+msgid "%s: unable to obtain selinux file label"
+msgstr "%s：無法得到 selinux 檔案標貼"
-#: fdisks/fdisk.c:383
+#: disk-utils/mkswap.c:712
#, fuzzy, c-format
-msgid "BLKGETSIZE ioctl failed on %s"
-msgstr "BLKGETSIZE ioctl 失敗的於 %s"
+msgid "%s: unable to obtain default selinux file label"
+msgstr "%s：無法得到 selinux 檔案標貼"
-#: fdisks/fdisk.c:409
-#, fuzzy
-msgid "failed to allocate libfdisk context"
-msgstr "配置迭代器時失敗"
+#: disk-utils/mkswap.c:716
+msgid "unable to create new selinux context"
+msgstr "無法建立新的 selinux 相關項目"
-#: fdisks/fdisk.c:418
-#, fuzzy
-msgid "invalid sector size argument"
-msgstr "無效的磁區大小引數"
+#: disk-utils/mkswap.c:718
+msgid "couldn't compute selinux context"
+msgstr "無法計算 selinux 相關項目"
+
+#: disk-utils/mkswap.c:724
+#, fuzzy, c-format
+msgid "unable to relabel %s to %s"
+msgstr "無法 relabel %s 到 %s"
-#: fdisks/fdisk.c:427 fdisks/sfdisk.c:2597
+#: disk-utils/partx.c:86
#, fuzzy
-msgid "invalid cylinders argument"
-msgstr "無效的磁柱引數"
+msgid "partition number"
+msgstr "分割區編號"
-#: fdisks/fdisk.c:436
+#: disk-utils/partx.c:87
#, fuzzy
-msgid "not found DOS label driver"
-msgstr "找不到未使用的裝置"
+msgid "start of the partition in sectors"
+msgstr "開始的分割在中磁區"
-#: fdisks/fdisk.c:449 fdisks/sfdisk.c:2606
+#: disk-utils/partx.c:88
#, fuzzy
-msgid "invalid heads argument"
-msgstr "ç\84¡æ\95\88ç\9a\84å\89\8d端å¼\95æ\95¸"
+msgid "end of the partition in sectors"
+msgstr "çµ\90æ\9d\9fç\9a\84å\88\86å\89²å\9c¨ä¸ç£\81å\8d\80"
-#: fdisks/fdisk.c:455 fdisks/sfdisk.c:2624
+#: disk-utils/partx.c:89
#, fuzzy
-msgid "invalid sectors argument"
-msgstr "ç\84¡æ\95\88ç\9a\84ç£\81å\8d\80å¼\95æ\95¸"
+msgid "number of sectors"
+msgstr "ç£\81å\8d\80æ\95¸é\87\8f"
-#: fdisks/fdisk.c:463 misc-utils/cal.c:351 sys-utils/dmesg.c:1286
+#: disk-utils/partx.c:90
#, fuzzy
-msgid "unsupported color mode"
-msgstr "ä¸\8då\8f\97æ\94¯æ\8f´ç\9a\84å\91½ä»¤"
+msgid "human readable size"
+msgstr "人é¡\9e readable 大å°\8f"
-#: fdisks/fdisk.c:486
+#: disk-utils/partx.c:91
#, fuzzy
-msgid ""
-"The device properties (sector size and geometry) should be used with one "
-"specified device only."
-msgstr "警告：-b (設定磁區大小) 選項應該與一個指定裝置共同使用\n"
+msgid "partition name"
+msgstr "分割名稱"
-#: fdisks/fdisk.c:525
-#, c-format
-msgid "Welcome to fdisk (%s)."
-msgstr ""
+#: disk-utils/partx.c:92 misc-utils/findmnt.c:118 misc-utils/lsblk.c:205
+#, fuzzy
+msgid "partition UUID"
+msgstr "分割 UUID"
-#: fdisks/fdisk.c:527
+#: disk-utils/partx.c:93
#, fuzzy
-msgid ""
-"Changes will remain in memory only, until you decide to write them.\n"
-"Be careful before using the write command.\n"
-msgstr ""
-"歡迎使用 fdisk (%s)。\n"
-"\n"
-"變更將剩下在中記憶體只有，直到您決定到寫入它們。\n"
-"請小心之前使用寫入命令。\n"
-"\n"
+msgid "partition table type (dos, gpt, ...)"
+msgstr "分割表型態 (DOS、gpt，...)"
-#: fdisks/fdisk.c:532
+#: disk-utils/partx.c:94 misc-utils/lsblk.c:200
#, fuzzy
-msgid "Device does not contain a recognized partition table."
-msgstr "裝置不包含辨識的分割表\n"
+msgid "partition flags"
+msgstr "分割旗標"
-#: fdisks/fdisk-menu.c:90
-msgid "Generic"
+#: disk-utils/partx.c:95
+msgid "partition type (a string, a UUID, or hex)"
msgstr ""
-#: fdisks/fdisk-menu.c:91
+#: disk-utils/partx.c:114 sys-utils/losetup.c:534 sys-utils/losetup.c:652
#, fuzzy
-msgid "delete a partition"
-msgstr "å\88ªé\99¤å\88\86å\89²"
+msgid "failed to initialize loopcxt"
+msgstr "å\88\9då§\8bå\8c\96 loopcxt æ\99\82失æ\95\97"
-#: fdisks/fdisk-menu.c:92
-#, fuzzy
-msgid "list known partition types"
-msgstr "清單已知分割區類型"
+#: disk-utils/partx.c:118
+#, fuzzy, c-format
+msgid "%s: failed to find unused loop device"
+msgstr "%s：無法尋找未使用的迴圈裝置"
-#: fdisks/fdisk-menu.c:93
-#, fuzzy
-msgid "add a new partition"
-msgstr "å\8a å\85¥æ\96°ç\9a\84å\88\86å\89²"
+#: disk-utils/partx.c:122
+#, fuzzy, c-format
+msgid "Trying to use '%s' for the loop device\n"
+msgstr "å\98\97試使ç\94¨ã\80\8e%sã\80\8fç\94¨æ\96¼è¿´å\9c\88è£\9dç½®\n"
-#: fdisks/fdisk-menu.c:94
-#, fuzzy
-msgid "print the partition table"
-msgstr "列印分割表"
+#: disk-utils/partx.c:126
+#, fuzzy, c-format
+msgid "%s: failed to set backing file"
+msgstr "%s：無法設定上一步檔案"
-#: fdisks/fdisk-menu.c:95
-#, fuzzy
-msgid "change a partition type"
-msgstr "變更分割系統識別號"
+#: disk-utils/partx.c:131 sys-utils/losetup.c:585
+#, fuzzy, c-format
+msgid "%s: failed to set up loop device"
+msgstr "%s：無法設定迴圈裝置"
-#: fdisks/fdisk-menu.c:96
-#, fuzzy
-msgid "verify the partition table"
-msgstr "驗證分割表"
+#: disk-utils/partx.c:161 login-utils/lslogins.c:322 misc-utils/fincore.c:92
+#: misc-utils/findmnt.c:383 misc-utils/lsblk.c:343 misc-utils/lsfd.c:477
+#: misc-utils/lslocks.c:351 misc-utils/uuidparse.c:125 misc-utils/wipefs.c:132
+#: sys-utils/irq-common.c:103 sys-utils/losetup.c:112 sys-utils/lscpu.c:200
+#: sys-utils/lscpu.c:215 sys-utils/lsipc.c:233 sys-utils/lsmem.c:178
+#: sys-utils/lsns.c:268 sys-utils/prlimit.c:291 sys-utils/rfkill.c:162
+#: sys-utils/swapon.c:150 sys-utils/wdctl.c:179 sys-utils/zramctl.c:147
+#, c-format
+msgid "unknown column: %s"
+msgstr "不明直欄：%s"
-#: fdisks/fdisk-menu.c:98
-#, fuzzy
-msgid "print the raw data of the first sector from the device"
-msgstr "列印未經處理資料在中分割表"
+#: disk-utils/partx.c:209
+#, fuzzy, c-format
+msgid "%s: failed to get partition number"
+msgstr "%s：無法提取分割區編號"
-#: fdisks/fdisk-menu.c:99
-#, fuzzy
-msgid "print the raw data of the disklabel from the device"
-msgstr "列印未經處理資料在中分割表"
+#: disk-utils/partx.c:287 disk-utils/partx.c:325 disk-utils/partx.c:479
+#, fuzzy, c-format
+msgid "specified range <%d:%d> does not make sense"
+msgstr "指定的範圍<%d:%d>不具任何意義"
-#: fdisks/fdisk-menu.c:101
-msgid "Misc"
+#: disk-utils/partx.c:291
+#, c-format
+msgid "range recount: max partno=%d, lower=%d, upper=%d\n"
msgstr ""
-#: fdisks/fdisk-menu.c:102
-#, fuzzy
-msgid "print this menu"
-msgstr "印出這份選單"
-
-#: fdisks/fdisk-menu.c:103
-#, fuzzy
-msgid "change display/entry units"
-msgstr "變更顯示/條目單位"
+#: disk-utils/partx.c:298
+#, fuzzy, c-format
+msgid "%s: error deleting partition %d"
+msgstr "%s：錯誤刪除分割 %d"
-#: fdisks/fdisk-menu.c:104
-#, fuzzy
-msgid "extra functionality (experts only)"
-msgstr "額外功能性 (專家限用)"
+#: disk-utils/partx.c:300
+#, fuzzy, c-format
+msgid "%s: error deleting partitions %d-%d"
+msgstr "%s：錯誤刪除分割區 %d-%d"
-#: fdisks/fdisk-menu.c:106
-msgid "Save & Exit"
-msgstr ""
+#: disk-utils/partx.c:333
+#, fuzzy, c-format
+msgid "%s: partition #%d removed\n"
+msgstr "%s：分割 #%d 移除\n"
-#: fdisks/fdisk-menu.c:107
-#, fuzzy
-msgid "write table to disk and exit"
-msgstr "寫入表格到磁碟然後離開"
+#: disk-utils/partx.c:339
+#, fuzzy, c-format
+msgid "%s: partition #%d doesn't exist\n"
+msgstr "%s：分割 #%d 已經不存在\n"
-#: fdisks/fdisk-menu.c:108
-#, fuzzy
-msgid "write table to disk"
-msgstr "寫入 disklabel 到磁碟"
+#: disk-utils/partx.c:344
+#, fuzzy, c-format
+msgid "%s: deleting partition #%d failed"
+msgstr "%s：刪除分割 #%d 失敗"
-#: fdisks/fdisk-menu.c:109
-#, fuzzy
-msgid "quit without saving changes"
-msgstr "離開但不儲存變更"
+#: disk-utils/partx.c:364
+#, fuzzy, c-format
+msgid "%s: error adding partition %d"
+msgstr "%s：錯誤加入分割 %d"
-#: fdisks/fdisk-menu.c:110 fdisks/fdisk-menu.c:111
-#, fuzzy
-msgid "return to main menu"
-msgstr "回傳到主選單"
+#: disk-utils/partx.c:366
+#, fuzzy, c-format
+msgid "%s: error adding partitions %d-%d"
+msgstr "%s：錯誤加入分割區 %d-%d"
-#: fdisks/fdisk-menu.c:121
-#, fuzzy
-msgid "Create a new label"
-msgstr "建立新的清空 Sun disklabel"
+#: disk-utils/partx.c:407 disk-utils/partx.c:515
+#, fuzzy, c-format
+msgid "%s: partition #%d added\n"
+msgstr "%s：分割 #%d 已加入\n"
-#: fdisks/fdisk-menu.c:122
-#, fuzzy
-msgid "create a new empty GPT partition table"
-msgstr "建立新的清空 DOS 分割表"
+#: disk-utils/partx.c:412
+#, fuzzy, c-format
+msgid "%s: adding partition #%d failed"
+msgstr "%s：加入分割 #%d 失敗"
-#: fdisks/fdisk-menu.c:123
-#, fuzzy
-msgid "create a new empty SGI (IRIX) partition table"
-msgstr "建立新的清空 DOS 分割表"
+#: disk-utils/partx.c:447
+#, fuzzy, c-format
+msgid "%s: error updating partition %d"
+msgstr "%s：錯誤刪除分割 %d"
-#: fdisks/fdisk-menu.c:124
-#, fuzzy
-msgid "create a new empty DOS partition table"
-msgstr "建立新的清空 DOS 分割表"
+#: disk-utils/partx.c:449
+#, fuzzy, c-format
+msgid "%s: error updating partitions %d-%d"
+msgstr "%s：錯誤刪除分割區 %d-%d"
-#: fdisks/fdisk-menu.c:125
-#, fuzzy
-msgid "create a new empty Sun partition table"
-msgstr "建立新的清空 DOS 分割表"
+#: disk-utils/partx.c:488
+#, fuzzy, c-format
+msgid "%s: no partition #%d"
+msgstr "%s：分割 #%d 已加入\n"
-#: fdisks/fdisk-menu.c:129
-#, fuzzy
-msgid "create an IRIX (SGI) partition table"
-msgstr "建立 IRIX (SGI) 分割表"
+#: disk-utils/partx.c:509
+#, fuzzy, c-format
+msgid "%s: partition #%d resized\n"
+msgstr "%s：分割 #%d 移除\n"
-#: fdisks/fdisk-menu.c:139
-#, fuzzy
-msgid "change number of cylinders"
-msgstr "變更磁柱數量"
+#: disk-utils/partx.c:523
+#, fuzzy, c-format
+msgid "%s: updating partition #%d failed"
+msgstr "%s：刪除分割 #%d 失敗"
-#: fdisks/fdisk-menu.c:140
-#, fuzzy
-msgid "change number of heads"
-msgstr "變更前端數量"
+#: disk-utils/partx.c:564
+#, fuzzy, c-format
+msgid "#%2d: %9ju-%9ju (%9ju sector, %6ju MB)\n"
+msgid_plural "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
+msgstr[0] "#%2d：%9 ju-%9 ju (%9 ju 磁區，%6 ju MB)\n"
-#: fdisks/fdisk-menu.c:141
+#: disk-utils/partx.c:680 misc-utils/fincore.c:371 misc-utils/findmnt.c:1792
+#: misc-utils/lsblk.c:2395 misc-utils/lsfd.c:532 misc-utils/lsfd.c:1984
+#: misc-utils/lslocks.c:487 sys-utils/losetup.c:339 sys-utils/lscpu.c:616
+#: sys-utils/lscpu.c:772 sys-utils/prlimit.c:320 sys-utils/rfkill.c:487
+#: sys-utils/swapon.c:305 sys-utils/wdctl.c:360
#, fuzzy
-msgid "change number of sectors/track"
-msgstr "變更磁區數量/軌段"
+msgid "failed to allocate output column"
+msgstr "callocate cpu 集合時失敗"
-#: fdisks/fdisk-menu.c:150 include/pt-mbr-partnames.h:91
-msgid "GPT"
-msgstr "GPT"
+#: disk-utils/partx.c:724
+#, fuzzy, c-format
+msgid "failed to initialize blkid filter for '%s'"
+msgstr "初始化 blkid 篩選器用於『%s 時失敗』"
-#: fdisks/fdisk-menu.c:151
-#, fuzzy
-msgid "change disk GUID"
-msgstr "已變更"
+#: disk-utils/partx.c:732
+#, fuzzy, c-format
+msgid "%s: failed to read partition table"
+msgstr "%s：無法讀取分割表"
-#: fdisks/fdisk-menu.c:152
-#, fuzzy
-msgid "change partition name"
-msgstr "分割名稱"
+#: disk-utils/partx.c:738
+#, fuzzy, c-format
+msgid "%s: partition table type '%s' detected\n"
+msgstr "%s：分割表型態『%s』偵測到\n"
-#: fdisks/fdisk-menu.c:153
-#, fuzzy
-msgid "change partition UUID"
-msgstr "分割 UUID"
+#: disk-utils/partx.c:742
+#, fuzzy, c-format
+msgid "%s: partition table with no partitions"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/fdisk-menu.c:163
-msgid "Sun"
+#: disk-utils/partx.c:755
+#, fuzzy, c-format
+msgid " %s [-a|-d|-s|-u] [--nr <n:m> | <partition>] <disk>\n"
+msgstr " %s [-a|-d|-s] [--nr <n:m>|<分割>]<磁碟>\n"
+
+#: disk-utils/partx.c:759
+msgid "Tell the kernel about the presence and numbering of partitions.\n"
msgstr ""
-#: fdisks/fdisk-menu.c:164
+#: disk-utils/partx.c:762
#, fuzzy
-msgid "toggle a read only flag"
-msgstr "切換唯讀旗標"
+msgid " -a, --add add specified partitions or all of them\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/fdisk-menu.c:165
-#, fuzzy
-msgid "toggle the mountable flag"
-msgstr "切換 mountable 旗標"
+#: disk-utils/partx.c:763
+msgid " -d, --delete delete specified partitions or all of them\n"
+msgstr ""
-#: fdisks/fdisk-menu.c:167
+#: disk-utils/partx.c:764
#, fuzzy
-msgid "change number of alternate cylinders"
-msgstr "變更交替磁柱數量"
+msgid " -u, --update update specified partitions or all of them\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/fdisk-menu.c:168
+#: disk-utils/partx.c:765
#, fuzzy
-msgid "change number of extra sectors per cylinder"
-msgstr "變更額外磁區數量各磁柱"
+msgid ""
+" -s, --show list partitions\n"
+"\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/fdisk-menu.c:169
-#, fuzzy
-msgid "change interleave factor"
-msgstr "變更交插因子"
+#: disk-utils/partx.c:766 misc-utils/lsblk.c:2000 sys-utils/lsmem.c:528
+msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr ""
-#: fdisks/fdisk-menu.c:170
-#, fuzzy
-msgid "change rotation speed (rpm)"
-msgstr "變更轉速 (rpm)"
+#: disk-utils/partx.c:767
+msgid " -g, --noheadings don't print headings for --show\n"
+msgstr ""
-#: fdisks/fdisk-menu.c:171
-#, fuzzy
-msgid "change number of physical cylinders"
-msgstr "變更實體磁柱數量"
+#: disk-utils/partx.c:768
+msgid " -n, --nr <n:m> specify the range of partitions (e.g. --nr 2:4)\n"
+msgstr ""
-#: fdisks/fdisk-menu.c:180
+#: disk-utils/partx.c:769 sys-utils/irqtop.c:271 sys-utils/lsirq.c:66
#, fuzzy
-msgid "SGI"
-msgstr "SGI raw"
+msgid " -o, --output <list> define which output columns to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: fdisks/fdisk-menu.c:181
+#: disk-utils/partx.c:770 sys-utils/lsmem.c:531
#, fuzzy
-msgid "select bootable partition"
-msgstr "選取可開機的分割"
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: fdisks/fdisk-menu.c:182
+#: disk-utils/partx.c:771 misc-utils/lsblk.c:1994 sys-utils/lsirq.c:64
+#: sys-utils/lsmem.c:526
#, fuzzy
-msgid "edit bootfile entry"
-msgstr "編輯 bootfile 條目"
+msgid " -P, --pairs use key=\"value\" output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: fdisks/fdisk-menu.c:183
+#: disk-utils/partx.c:772 misc-utils/lsblk.c:2010 sys-utils/lsmem.c:532
#, fuzzy
-msgid "select sgi swap partition"
-msgstr "選取 sgi 交換分割區"
-
-#: fdisks/fdisk-menu.c:184
-msgid "create SGI info"
-msgstr ""
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: fdisks/fdisk-menu.c:193
+#: disk-utils/partx.c:773
#, fuzzy
-msgid "DOS (MBR)"
-msgstr "DOS R/O"
+msgid " -S, --sector-size <num> overwrite sector size\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: fdisks/fdisk-menu.c:194
+#: disk-utils/partx.c:774
#, fuzzy
-msgid "toggle a bootable flag"
-msgstr "切換可開機的旗標"
+msgid " -t, --type <type> specify the partition type\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/fdisk-menu.c:195
+#: disk-utils/partx.c:775
#, fuzzy
-msgid "edit nested BSD disklabel"
-msgstr "編輯 bsd disklabel"
+msgid " --list-types list supported partition types and exit\n"
+msgstr " -T [或 --list-types]：列出已知分割區類型"
-#: fdisks/fdisk-menu.c:196
+#: disk-utils/partx.c:776 sys-utils/fallocate.c:101
#, fuzzy
-msgid "toggle the dos compatibility flag"
-msgstr "切換 DOS 相容性旗標"
+msgid " -v, --verbose verbose mode\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: fdisks/fdisk-menu.c:198
+#: disk-utils/partx.c:861
#, fuzzy
-msgid "move beginning of data in a partition"
-msgstr "移動起始部分的資料在中分割"
+msgid "failed to parse --nr <M-N> range"
+msgstr "剖析 --nr 時失敗 <M-N> 範圍"
-#: fdisks/fdisk-menu.c:199
+#: disk-utils/partx.c:950
#, fuzzy
-msgid "list extended partitions"
-msgstr "清單進階分割區"
+msgid "partition and disk name do not match"
+msgstr ""
+"分割表已變更！\n"
+"\n"
-#: fdisks/fdisk-menu.c:200
+#: disk-utils/partx.c:979
#, fuzzy
-msgid "fix partition order"
-msgstr "修正分割排序"
+msgid "--nr and <partition> are mutually exclusive"
+msgstr "--nr 和 <partition> 彼此互斥"
-#: fdisks/fdisk-menu.c:201
-#, fuzzy
-msgid "change the disk identifier"
-msgstr "變更磁碟識別碼"
+#: disk-utils/partx.c:998
+#, fuzzy, c-format
+msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
+msgstr "分割：%s，磁碟：%s，降低：%d，大寫：%d\n"
-#: fdisks/fdisk-menu.c:210
-#, fuzzy
-msgid "BSD"
-msgstr "BSD/OS"
+#: disk-utils/partx.c:1010
+#, fuzzy, c-format
+msgid "%s: cannot delete partitions"
+msgstr "%s：無法刪除分割區"
-#: fdisks/fdisk-menu.c:211
-#, fuzzy
-msgid "edit drive data"
-msgstr "編輯推動資料"
+#: disk-utils/partx.c:1013
+#, fuzzy, c-format
+msgid "%s: partitioned loop devices unsupported"
+msgstr "%s：分割的迴圈裝置不受支援的"
-#: fdisks/fdisk-menu.c:212
-#, fuzzy
-msgid "install bootstrap"
-msgstr "安裝啟動程式"
+#: disk-utils/partx.c:1031
+#, fuzzy, c-format
+msgid "%s: failed to initialize blkid prober"
+msgstr "%s：無法初始化 blkid prober"
-#: fdisks/fdisk-menu.c:213
-#, fuzzy
-msgid "show complete disklabel"
-msgstr "顯示完成 disklabel"
+#: disk-utils/raw.c:50
+#, fuzzy, c-format
+msgid ""
+" %1$s %2$srawN <major> <minor>\n"
+" %1$s %2$srawN /dev/<blockdevice>\n"
+" %1$s -q %2$srawN\n"
+" %1$s -qa\n"
+msgstr ""
+" %1$s %2$srawN <major><次要>\n"
+" %1$s %2$srawN/dev/<blockdevice>\n"
+" %1$s -q %2$srawN\n"
+" %1$s -qa\n"
+
+#: disk-utils/raw.c:57
+msgid "Bind a raw character device to a block device.\n"
+msgstr ""
-#: fdisks/fdisk-menu.c:214
+#: disk-utils/raw.c:60
#, fuzzy
-msgid "link BSD partition to non-BSD partition"
-msgstr "鏈結 BSD 分割到 non-BSD 分割"
+msgid " -q, --query set query mode\n"
+msgstr " -q, --query 設定查詢模式\n"
-#: fdisks/fdisk-menu.c:324
-#, c-format
-msgid ""
-"\n"
-"Help (expert commands):\n"
-msgstr ""
+#: disk-utils/raw.c:61
+#, fuzzy
+msgid " -a, --all query all raw devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: fdisks/fdisk-menu.c:326
+#: disk-utils/raw.c:166
#, fuzzy, c-format
-msgid ""
-"\n"
-"Help:\n"
-msgstr "求助"
-
-#: fdisks/fdisk-menu.c:364
-msgid "Expert command (m for help): "
-msgstr "專家命令 (m 以獲得說明)："
+msgid "Device '%s' is the control raw device (use raw<N> where <N> is greater than zero)"
+msgstr "裝置『%s』是控制原始裝置 (使用原始<N> 位置<N>是大於零)"
-#: fdisks/fdisk-menu.c:366
-msgid "Command (m for help): "
-msgstr "命令 (m 以獲得說明)："
+#: disk-utils/raw.c:183
+#, fuzzy, c-format
+msgid "Cannot locate block device '%s'"
+msgstr "無法尋找位置區塊裝置『%s』"
-#: fdisks/fdisk-menu.c:376
+#: disk-utils/raw.c:186
#, fuzzy, c-format
-msgid "%c: unknown command"
-msgstr "%c: 不明的命令\n"
+msgid "Device '%s' is not a block device"
+msgstr "裝置『%s』並非區塊裝置"
-#: fdisks/fdisk-menu.c:416
+#: disk-utils/raw.c:195 disk-utils/raw.c:198 sys-utils/ipcrm.c:353
+#: sys-utils/ipcrm.c:367 sys-utils/ipcrm.c:381
#, fuzzy
-msgid "failed to write disk label"
-msgstr "%s：無法寫入標籤"
+msgid "failed to parse argument"
+msgstr "剖析引數時失敗"
-#: fdisks/fdisk-menu.c:419
-#, fuzzy
-msgid "The partition table has been altered."
-msgstr ""
-"分割表已變更！\n"
-"\n"
+#: disk-utils/raw.c:216
+#, fuzzy, c-format
+msgid "Cannot open master raw device '%s'"
+msgstr "無法開啟主原始裝置『%s』"
-#: fdisks/fdisk-menu.c:459
+#: disk-utils/raw.c:231
#, fuzzy, c-format
-msgid "Could not delete partition %d"
-msgstr "已選分割區 %d\n"
+msgid "Cannot locate raw device '%s'"
+msgstr "無法尋找位置原始裝置『%s』"
-#: fdisks/fdisk-menu.c:461
+#: disk-utils/raw.c:234
#, fuzzy, c-format
-msgid "Partition %d is deleted"
-msgstr "å\88\86å\89² %d 被å\88ªé\99¤\n"
+msgid "Raw device '%s' is not a character dev"
+msgstr "å\8e\9få§\8bè£\9dç½®ã\80\8e%sã\80\8f並é\9d\9eå\97å\85\83 dev"
-#: fdisks/fdisk-menu.c:477
-#, fuzzy
-msgid "Changing display/entry units to cylinders (DEPRECATED!)."
-msgstr "è®\8aæ\9b´é¡¯ç¤º/輸å\85¥å\96®ä½\8dç\82ºç£\81æ\9f± (ä¸\8då®\9cå\86\8dç\94¨ï¼\81)\n"
+#: disk-utils/raw.c:238
+#, fuzzy, c-format
+msgid "Device '%s' is not a raw dev"
+msgstr "è£\9dç½®ã\80\8e%sã\80\8f並é\9d\9eå\8e\9få§\8b dev"
-#: fdisks/fdisk-menu.c:479
+#: disk-utils/raw.c:248
#, fuzzy
-msgid "Changing display/entry units to sectors."
-msgstr "變更顯示/輸入單位為磁區\n"
+msgid "Error querying raw device"
+msgstr "查詢原始裝置時發生錯誤"
-#: fdisks/fdisk-menu.c:489
-#, fuzzy
-msgid "Leaving nested disk label."
-msgstr "編輯 bsd disklabel"
+#: disk-utils/raw.c:257 disk-utils/raw.c:272
+#, fuzzy, c-format
+msgid "%sraw%d: bound to major %d, minor %d\n"
+msgstr "%sraw%d： 約束到主要的 %d，次要 %d\n"
-#: fdisks/fdisk-menu.c:572
+#: disk-utils/raw.c:271
#, fuzzy
-msgid "Entering to nested BSD disk label"
-msgstr "編輯 bsd disklabel"
-
-#: fdisks/fdisk-menu.c:754
-msgid "Number of cylinders"
-msgstr "磁柱數量"
+msgid "Error setting raw device"
+msgstr "設定原始裝置時發生錯誤"
-#: fdisks/fdisk-menu.c:758
-msgid "Number of heads"
-msgstr "磁頭數量"
+#: disk-utils/resizepart.c:20
+#, fuzzy, c-format
+msgid " %s <disk device> <partition number> <length>\n"
+msgstr " %s <disk device><分割區編號><長度>\n"
-#: fdisks/fdisk-menu.c:762
-msgid "Number of sectors"
-msgstr "磁區數量"
+#: disk-utils/resizepart.c:24
+msgid "Tell the kernel about the new size of a partition.\n"
+msgstr ""
-#: fdisks/sfdisk.c:112
+#: disk-utils/resizepart.c:107
#, fuzzy, c-format
-msgid "seek error on %s - cannot seek to %lu"
-msgstr "於 %s 搜尋錯誤 - 無法搜尋至 %lu\n"
+msgid "%s: failed to get start of the partition number %s"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisks/sfdisk.c:117
-#, fuzzy, c-format
-msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x"
-msgstr "搜尋錯誤：想要 0x%08x%08x, 得到 0x%08x%08x\n"
+#: disk-utils/resizepart.c:112
+#, fuzzy
+msgid "failed to resize partition"
+msgstr "調整大小分割時失敗"
-#: fdisks/sfdisk.c:165 fdisks/sfdisk.c:243
-#, fuzzy, c-format
-msgid "read error on %s - cannot read sector %llu"
-msgstr "於 %s 讀取錯誤 - 無法讀取磁區 %lu\n"
+#: disk-utils/sfdisk.c:242
+#, fuzzy
+msgid "failed to allocate nested libfdisk context"
+msgstr "配置迭代器時失敗"
-#: fdisks/sfdisk.c:195
+#: disk-utils/sfdisk.c:302
#, fuzzy, c-format
-msgid "write error on %s - cannot write sector %llu"
-msgstr "於 %s 寫入錯誤 - 無法寫入磁區 %lu\n"
+msgid "cannot seek %s"
+msgstr "無法開啟 %s"
-#: fdisks/sfdisk.c:232
+#: disk-utils/sfdisk.c:313 libfdisk/src/bsd.c:724 libfdisk/src/bsd.c:905
+#: schedutils/uclampset.c:119 term-utils/script.c:470
#, fuzzy, c-format
-msgid "cannot open partition sector save file (%s)"
-msgstr "無法開啟分割磁區的儲存檔案 (%s)\n"
+msgid "cannot write %s"
+msgstr "無法寫入 %s"
-#: fdisks/sfdisk.c:248
-#, fuzzy, c-format
-msgid "write error on %s"
-msgstr "於 %s 寫入錯誤\n"
+#: disk-utils/sfdisk.c:320
+#, c-format
+msgid "%12s (offset %5ju, size %5ju): %s"
+msgstr ""
-#: fdisks/sfdisk.c:277
+#: disk-utils/sfdisk.c:326
#, fuzzy, c-format
-msgid "cannot stat partition restore file (%s)"
-msgstr "無法識別分割區的還原檔案狀態 (%s)\n"
+msgid "%s: failed to create a backup"
+msgstr "%s：無法寫入標籤"
-#: fdisks/sfdisk.c:282
+#: disk-utils/sfdisk.c:339
#, fuzzy
-msgid "partition restore file has wrong size - not restoring"
-msgstr "分割區還原檔案大小有誤 - 無法還原\n"
+msgid "failed to create a backup file, $HOME undefined"
+msgstr "%s：無法寫入標籤"
-#: fdisks/sfdisk.c:291
-#, fuzzy, c-format
-msgid "cannot open partition restore file (%s)"
-msgstr "無法開啟分割區的還原檔案 (%s)\n"
+#: disk-utils/sfdisk.c:365
+msgid "Backup files:"
+msgstr ""
-#: fdisks/sfdisk.c:296
-#, fuzzy, c-format
-msgid "error reading %s"
-msgstr "讀取 %s 時發生錯誤\n"
+#: disk-utils/sfdisk.c:411
+#, fuzzy
+msgid "failed to read new partition from device; ignoring --move-data"
+msgstr "%s：無法讀取分割表"
-#: fdisks/sfdisk.c:302
-#, fuzzy, c-format
-msgid "cannot open device %s for writing"
-msgstr "無法開啟裝置 %s 以供寫入\n"
+#: disk-utils/sfdisk.c:413
+#, fuzzy
+msgid "failed to get size of the new partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisks/sfdisk.c:312
-#, fuzzy, c-format
-msgid "error writing sector %lu on %s"
-msgstr "於 %2$s 寫入磁區 %1$lu 時發生錯誤\n"
+#: disk-utils/sfdisk.c:415
+#, fuzzy
+msgid "failed to get start of the new partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisks/sfdisk.c:383
-#, fuzzy, c-format
-msgid "Disk %s: cannot get geometry"
-msgstr "磁碟 %s: 無法取得結構參數\n"
+#: disk-utils/sfdisk.c:417
+#, fuzzy
+msgid "failed to get size of the old partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisks/sfdisk.c:400
-#, fuzzy, c-format
-msgid "Disk %s: cannot get size"
-msgstr "磁碟 %s: 無法取得大小\n"
+#: disk-utils/sfdisk.c:419
+#, fuzzy
+msgid "failed to get start of the old partition; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisks/sfdisk.c:432
-#, fuzzy, c-format
-msgid ""
-"Warning: start=%lu - this looks like a partition rather than\n"
-"the entire disk. Using fdisk on it is probably meaningless.\n"
-"[Use the --force option if you really want this]"
-msgstr ""
-"警告：開始=%lu - 這看來像是分割區而非\n"
-"整個磁碟。於其上使用 fdisk 可能不具意義的。\n"
-"[如果您確實想要如此，就使用 --force 選項]\n"
+#: disk-utils/sfdisk.c:421
+#, fuzzy
+msgid "start of the partition has not been moved; ignoring --move-data"
+msgstr "%s：無法提取開始的分割區編號 %s"
-#: fdisks/sfdisk.c:440
-#, fuzzy, c-format
-msgid "Warning: HDIO_GETGEO says that there are %lu heads"
-msgstr "警告：HDIO_GETGEO 表示具有 %lu 個磁頭\n"
+#: disk-utils/sfdisk.c:423
+msgid "new partition is smaller than original; ignoring --move-data"
+msgstr ""
-#: fdisks/sfdisk.c:443
-#, fuzzy, c-format
-msgid "Warning: HDIO_GETGEO says that there are %lu sectors"
-msgstr "警告：HDIO_GETGEO 表示具有 %lu 段磁區\n"
+#: disk-utils/sfdisk.c:474
+msgid "Data move: (--no-act)"
+msgstr ""
-#: fdisks/sfdisk.c:447
-#, fuzzy, c-format
-msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders"
-msgstr "警告：BLKGETSIZE/HDIO_GETGEO 表示具有 %lu 圈磁柱\n"
+#: disk-utils/sfdisk.c:474
+msgid "Data move:"
+msgstr ""
-#: fdisks/sfdisk.c:452
+#: disk-utils/sfdisk.c:477
#, fuzzy, c-format
-msgid ""
-"Warning: unlikely number of sectors (%lu) - usually at most 63\n"
-"This will give problems with all software that uses C/H/S addressing."
-msgstr ""
-"警告：不太可能的磁區數量 (%lu) - 通常最多為 63\n"
-"這將對於使用 C/H/S 定址的軟體造成問題。\n"
+msgid " typescript file: %s"
+msgstr "無法開啟 typescript 檔案 %s"
-#: fdisks/sfdisk.c:456
+#: disk-utils/sfdisk.c:478
#, c-format
-msgid ""
-"\n"
-"Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
+msgid " start sector: (from/to) %ju / %ju\n"
msgstr ""
-"\n"
-"磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n"
-#: fdisks/sfdisk.c:542
+#: disk-utils/sfdisk.c:479
#, fuzzy, c-format
-msgid ""
-"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)"
-msgstr "分割區 %2$s 的 %1$s 有不可能的磁頭數值：%3$lu (應該介於 0-%4$lu)\n"
+msgid " sectors: %ju\n"
+msgstr "，%llu 磁區\n"
-#: fdisks/sfdisk.c:547
+#: disk-utils/sfdisk.c:480
#, fuzzy, c-format
-msgid ""
-"%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)"
-msgstr "分割區 %1$s 的 %2$s 有不可能的磁區數值：%3$lu (應該介於 1-%4$lu)\n"
+msgid " step size: %zu bytes\n"
+msgstr "以位元組為單位取得大小"
-#: fdisks/sfdisk.c:552
-#, fuzzy, c-format
-msgid ""
-"%s of partition %s has impossible value for cylinders: %lu (should be in 0-"
-"%lu)"
-msgstr "分割區 %1$s 的 %2$s 有不可能的磁柱數值：%3$lu (應該介於 0-%4$lu)\n"
+#: disk-utils/sfdisk.c:490
+#, fuzzy
+msgid "Do you want to move partition data?"
+msgstr "您要將這個寫入磁碟嗎？[ynq] "
-#: fdisks/sfdisk.c:592
-#, c-format
-msgid ""
-"Id Name\n"
-"\n"
+#: disk-utils/sfdisk.c:492 disk-utils/sfdisk.c:2014
+msgid "Leaving."
msgstr ""
-"識別號 名稱\n"
-"\n"
-#: fdisks/sfdisk.c:755
+#: disk-utils/sfdisk.c:554
#, c-format
-msgid "Re-reading the partition table ...\n"
-msgstr "重新讀取分割表…\n"
-
-#: fdisks/sfdisk.c:757
-#, fuzzy
-msgid ""
-"The command to re-read the partition table failed.\n"
-"Run partprobe(8), kpartx(8) or reboot your system now,\n"
-"before using mkfs"
+msgid "cannot read at offset: %ju; continue"
msgstr ""
-"重新讀取分割表的命令失敗。\n"
-"在使用 mkfs 之前，請執行 partprobe(8),kpartx(8) 或將您的系統重新開機\n"
-
-#: fdisks/sfdisk.c:765
-#, fuzzy, c-format
-msgid "Error closing %s"
-msgstr "關閉 %s 時發生錯誤\n"
-#: fdisks/sfdisk.c:806
+#: disk-utils/sfdisk.c:565
#, c-format
-msgid "%s: no such partition\n"
-msgstr "%s：無此類分割區\n"
+msgid "cannot write at offset: %ju; continue"
+msgstr ""
-#: fdisks/sfdisk.c:829
-#, fuzzy
-msgid "unrecognized format - using sectors"
-msgstr "無法辨識的格式 - 使用磁區數\n"
+#: disk-utils/sfdisk.c:571
+#, c-format
+msgid "cannot fsync at offset: %ju; continue"
+msgstr ""
-#: fdisks/sfdisk.c:890
-#, fuzzy, c-format
-msgid "unimplemented format - using %s"
-msgstr "尚未實作的格式 - 使用 %s\n"
+#: disk-utils/sfdisk.c:595
+#, c-format
+msgid "Moved %ju from %ju sectors (%.3f%%, %.1f MiB/s)."
+msgstr ""
-#: fdisks/sfdisk.c:891 libfdisk/src/bsd.c:496
-msgid "cylinders"
-msgstr "磁柱"
+#: disk-utils/sfdisk.c:600
+#, c-format
+msgid "Moved %ju from %ju sectors (%.3f%%)."
+msgstr ""
-#: fdisks/sfdisk.c:891
-msgid "sectors"
-msgstr "磁區"
+#: disk-utils/sfdisk.c:624
+#, c-format
+msgid "Moved %ju from %ju sectors (%.0f%%)."
+msgstr ""
-#: fdisks/sfdisk.c:895
-#, fuzzy, c-format
-msgid ""
-"Units: cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
-"\n"
+#: disk-utils/sfdisk.c:637
+msgid "Your data has not been moved (--no-act)."
msgstr ""
-"單位：磁柱的 %lu 位元組，區塊的 1024 位元組，計數從 %d\n"
-"\n"
-#: fdisks/sfdisk.c:897
+#: disk-utils/sfdisk.c:639
#, c-format
-msgid " Device Boot Start End #cyls #blocks Id System\n"
-msgstr " 裝置開機起始 結束 磁柱數 區塊數 識別號 系統\n"
+msgid "%zu I/O errors detected!"
+msgstr ""
-#: fdisks/sfdisk.c:902
+#: disk-utils/sfdisk.c:642
#, fuzzy, c-format
-msgid ""
-"Units: sectors of 512 bytes, counting from %d\n"
-"\n"
+msgid "%s: failed to move data"
+msgstr "設定路徑時失敗"
+
+#: disk-utils/sfdisk.c:654
+#, fuzzy
+msgid "The partition table is unchanged (--no-act)."
msgstr ""
-"å\96®ä½\8dï¼\9aç£\81å\8d\80ç\9a\84 512 ä½\8då\85\83çµ\84ï¼\8cè¨\88æ\95¸å¾\9e %d\n"
+"å\88\86å\89²è¡¨å·²è®\8aæ\9b´ï¼\81\n"
"\n"
-#: fdisks/sfdisk.c:904
-#, c-format
-msgid " Device Boot Start End #sectors Id System\n"
-msgstr " 裝置開機 起始 結束 磁區數 識別號 系統\n"
-
-#: fdisks/sfdisk.c:907
-#, fuzzy, c-format
+#: disk-utils/sfdisk.c:662
+#, fuzzy
msgid ""
-"Units: blocks of 1024 bytes, counting from %d\n"
"\n"
+"The partition table has been altered."
msgstr ""
-"å\96®ä½\8dï¼\9aå\8d\80å¡\8aç\9a\84 1024 ä½\8då\85\83çµ\84ï¼\8cè¨\88æ\95¸å¾\9e %d\n"
+"å\88\86å\89²è¡¨å·²è®\8aæ\9b´ï¼\81\n"
"\n"
-#: fdisks/sfdisk.c:909
-#, c-format
-msgid " Device Boot Start End #blocks Id System\n"
-msgstr " 裝置開機 起始 結束 區塊數 識別號 系統\n"
-
-#: fdisks/sfdisk.c:912
+#: disk-utils/sfdisk.c:737
#, fuzzy, c-format
+msgid "unsupported label '%s'"
+msgstr "不受支援的引數：%s"
+
+#: disk-utils/sfdisk.c:740
msgid ""
-"Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from %d\n"
+"Id Name\n"
"\n"
msgstr ""
-"單位：1 MiB=1024*1024 位元組，區塊的 1024 位元組，計數從 %d\n"
+"識別號 名稱\n"
"\n"
-#: fdisks/sfdisk.c:914
-#, c-format
-msgid " Device Boot Start End MiB #blocks Id System\n"
-msgstr " 裝置開機起始 結束 MiB 區塊數 識別號 系統\n"
-
-#: fdisks/sfdisk.c:1073
-#, c-format
-msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
-msgstr "\t\t起始：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
+#: disk-utils/sfdisk.c:767
+#, fuzzy
+msgid "unrecognized partition table type"
+msgstr " %s: 無法辨識的分割表類型\n"
-#: fdisks/sfdisk.c:1080
-#, c-format
-msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
-msgstr "\t\t結束：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
+#: disk-utils/sfdisk.c:820
+#, fuzzy, c-format
+msgid "Cannot get size of %s"
+msgstr "無法提取大小的 %s"
-#: fdisks/sfdisk.c:1083
-#, c-format
-msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
-msgstr "分割區結束於磁柱 %ld，位於磁碟末端之後\n"
+#: disk-utils/sfdisk.c:857
+#, fuzzy, c-format
+msgid "total: %ju blocks\n"
+msgstr "總計：%llu 區塊\n"
-#: fdisks/sfdisk.c:1094
+#: disk-utils/sfdisk.c:916 disk-utils/sfdisk.c:994 disk-utils/sfdisk.c:1031
+#: disk-utils/sfdisk.c:1056 disk-utils/sfdisk.c:1090 disk-utils/sfdisk.c:1149
+#: disk-utils/sfdisk.c:1217 disk-utils/sfdisk.c:1272 disk-utils/sfdisk.c:1328
+#: disk-utils/sfdisk.c:1381 disk-utils/sfdisk.c:1419 disk-utils/sfdisk.c:1755
#, fuzzy
-msgid "No partitions found"
-msgstr "æ\89¾ä¸\8då\88°å\88\86å\89²å\8d\80\n"
+msgid "no disk device specified"
+msgstr "æ²\92æ\9c\89è¿´å\9c\88è£\9dç½®æ\8c\87å®\9aç\9a\84"
-#: fdisks/sfdisk.c:1097
-#, fuzzy, c-format
-msgid ""
-"Warning: The partition table looks like it was made\n"
-" for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
-"For this listing I'll assume that geometry."
+#: disk-utils/sfdisk.c:926
+msgid "toggle boot flags is unsupported for Hybrid GPT/MBR"
msgstr ""
-"警告：分割表看起來像是\n"
-"用於 C/H/S=*/%ld/%ld (而非 %ld/%ld/%ld)。\n"
-"我將會假設該結構參數以用於此列表。\n"
-#: fdisks/sfdisk.c:1146
+#: disk-utils/sfdisk.c:931
#, fuzzy
-msgid "no partition table present."
-msgstr "沒有分割表呈現。"
+msgid "cannot switch to PMBR"
+msgstr "無法識別「%s」狀態"
-#: fdisks/sfdisk.c:1148
-#, fuzzy, c-format
-msgid "strange, only %d partitions defined."
-msgstr "怪異的，只有 %d 分割區定義。"
+#: disk-utils/sfdisk.c:932
+msgid "Activation is unsupported for GPT -- entering nested PMBR."
+msgstr ""
-#: fdisks/sfdisk.c:1157
-#, fuzzy, c-format
-msgid "Warning: partition %s has size 0 but is not marked Empty"
-msgstr "警告：分割區 %s 大小為 0 但是並未標記為空\n"
+#: disk-utils/sfdisk.c:935
+msgid "toggle boot flags is supported for MBR or PMBR only"
+msgstr ""
-#: fdisks/sfdisk.c:1160
-#, fuzzy, c-format
-msgid "Warning: partition %s has size 0 and is bootable"
-msgstr "警告：分割區 %s 大小為 0 且為可開機\n"
+#: disk-utils/sfdisk.c:967 disk-utils/sfdisk.c:1010 disk-utils/sfdisk.c:1154
+#: disk-utils/sfdisk.c:1222 disk-utils/sfdisk.c:1277 disk-utils/sfdisk.c:1333
+#: disk-utils/sfdisk.c:1753 disk-utils/sfdisk.c:2285
+#, fuzzy
+msgid "failed to parse partition number"
+msgstr "%s：無法提取分割區編號"
-#: fdisks/sfdisk.c:1163
-#, fuzzy, c-format
-msgid "Warning: partition %s has size 0 and nonzero start"
-msgstr "警告：分割區 %s 大小為 0 且以非零值開始\n"
+#: disk-utils/sfdisk.c:972
+#, c-format
+msgid "%s: partition %d: failed to toggle bootable flag"
+msgstr ""
-#: fdisks/sfdisk.c:1175
+#: disk-utils/sfdisk.c:1005 disk-utils/sfdisk.c:1013
#, fuzzy, c-format
-msgid "Warning: partition %s is not contained in partition %s"
-msgstr "警告：分割 %s 未被包含在中分割 %s\n"
+msgid "%s: partition %zu: failed to delete"
+msgstr "%s：無法提取分割區編號"
-#: fdisks/sfdisk.c:1187
+#: disk-utils/sfdisk.c:1061 disk-utils/sfdisk.c:1095
#, fuzzy, c-format
-msgid "Warning: partitions %s and %s overlap"
-msgstr "è¦å\91\8aï¼\9aå\88\86å\89²å\8d\80 %s å\92\8c %s é\87\8dç\96\8a\n"
+msgid "%s: does not contain a recognized partition table"
+msgstr "è£\9dç½®ä¸\8då\8c\85å\90«è¾¨è\98ç\9a\84å\88\86å\89²è¡¨\n"
-#: fdisks/sfdisk.c:1199
-#, fuzzy, c-format
-msgid ""
-"Warning: partition %s contains part of the partition table (sector %llu),\n"
-"and will destroy it when filled"
-msgstr ""
-"警告：分割 %s 含有部分的分割表 (磁區 %llu)，\n"
-"並將銷毀它時 filled\n"
+#: disk-utils/sfdisk.c:1065
+#, fuzzy
+msgid "failed to allocate dump struct"
+msgstr "callocate cpu 集合時失敗"
-#: fdisks/sfdisk.c:1212
+#: disk-utils/sfdisk.c:1069
#, fuzzy, c-format
-msgid "Warning: partition %s starts at sector 0"
-msgstr "警告：分割區 %s 開始於磁區 0\n"
+msgid "%s: failed to dump partition table"
+msgstr "%s：無法讀取分割表"
-#: fdisks/sfdisk.c:1217
+#: disk-utils/sfdisk.c:1127
#, fuzzy, c-format
-msgid "Warning: partition %s extends past end of disk"
-msgstr "警告：分割區 %s 延伸超過磁碟末端\n"
+msgid "%s: no partition table found"
+msgstr "無分割表。\n"
-#: fdisks/sfdisk.c:1233
+#: disk-utils/sfdisk.c:1131
#, fuzzy, c-format
-msgid ""
-"Warning: partition %s has size %d.%d TB (%llu bytes),\n"
-"which is larger than the %llu bytes limit imposed\n"
-"by the DOS partition table for %d-byte sectors"
-msgstr ""
-"警告：分割 %s 有大小 %d.%d TB (%llu 位元組)，\n"
-"該項是大於 %llu 位元組限制施加\n"
-"由 DOS 分割表用於 %d-byte 磁區\n"
+msgid "%s: partition %zu: partition table contains only %zu partitions"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:1249
+#: disk-utils/sfdisk.c:1134
#, fuzzy, c-format
-msgid ""
-"Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
-"which exceeds the DOS partition table limit of %llu sectors"
-msgstr ""
-"警告：分割 %s 開始於磁區 %llu (%d.%d TB 用於 %d-byte 磁區)，\n"
-"該項超出 DOS 分割表限制的 %llu 磁區\n"
+msgid "%s: partition %zu: partition is unused"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:1269
+#: disk-utils/sfdisk.c:1153 disk-utils/sfdisk.c:1221 disk-utils/sfdisk.c:1276
+#: disk-utils/sfdisk.c:1332
#, fuzzy
-msgid ""
-"Among the primary partitions, at most one can be extended\n"
-" (although this is not a problem under Linux)"
-msgstr ""
-"在主要分割區之中，最多只能有一個是擴充分割區\n"
-"(雖然這在 Linux 之下並不是個問題)\n"
-
-#: fdisks/sfdisk.c:1289
-#, fuzzy, c-format
-msgid "Warning: partition %s does not start at a cylinder boundary"
-msgstr "警告：分割區 %s 並非啟始於磁柱邊界\n"
-
-#: fdisks/sfdisk.c:1295
-#, fuzzy, c-format
-msgid "Warning: partition %s does not end at a cylinder boundary"
-msgstr "警告：分割區 %s 並非結束於磁柱邊界\n"
+msgid "no partition number specified"
+msgstr "未指定任何動作"
-#: fdisks/sfdisk.c:1314
+#: disk-utils/sfdisk.c:1159 disk-utils/sfdisk.c:1227 disk-utils/sfdisk.c:1282
+#: disk-utils/sfdisk.c:1338 disk-utils/sfdisk.c:1387 disk-utils/sfdisk.c:1421
+#: sys-utils/losetup.c:784
#, fuzzy
-msgid ""
-"Warning: more than one primary partition is marked bootable (active)\n"
-"This does not matter for LILO, but the DOS MBR will not boot this disk."
-msgstr ""
-"警告：超過一個的主要分割區被標記為可開機的 (作用中)\n"
-"這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
+msgid "unexpected arguments"
+msgstr "未預期的引數數量"
-#: fdisks/sfdisk.c:1321
-#, fuzzy
-msgid ""
-"Warning: usually one can boot from primary partitions only\n"
-"LILO disregards the `bootable' flag."
-msgstr ""
-"警告：通常只可以從主要分割區開機\n"
-"LILO 並不理會「可開機的」旗標。\n"
+#: disk-utils/sfdisk.c:1174
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to get partition type"
+msgstr "%s：無法提取分割區編號"
-#: fdisks/sfdisk.c:1327
-#, fuzzy
-msgid ""
-"Warning: no primary partition is marked bootable (active)\n"
-"This does not matter for LILO, but the DOS MBR will not boot this disk."
-msgstr ""
-"警告：沒有主要分割區被標記為可開機的 (作用中)\n"
-"這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
+#: disk-utils/sfdisk.c:1197
+#, fuzzy, c-format
+msgid "failed to parse %s partition type '%s'"
+msgstr "剖析機能『%s 時失敗』"
-#: fdisks/sfdisk.c:1341
-msgid "start"
-msgstr "啟始"
+#: disk-utils/sfdisk.c:1201
+#, fuzzy, c-format
+msgid "%s: partition %zu: failed to set partition type"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:1344
+#: disk-utils/sfdisk.c:1239
#, fuzzy, c-format
-msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)"
-msgstr ""
-"分割區 %s：啟始：(c,h,s) 預期為 (%ld ,%ld ,%ld) 但找到 (%ld ,%ld ,%ld)\n"
+msgid "%s: partition %zu: failed to get partition UUID"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:1350
-msgid "end"
-msgstr "結束"
+#: disk-utils/sfdisk.c:1252 disk-utils/sfdisk.c:1307 disk-utils/sfdisk.c:1361
+#, fuzzy
+msgid "failed to allocate partition object"
+msgstr "配置迭代器時失敗"
-#: fdisks/sfdisk.c:1353
+#: disk-utils/sfdisk.c:1256
#, fuzzy, c-format
-msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)"
-msgstr "分割區 %s：結束：(c,h,s) 預期為 (%ld ,%ld ,%ld) 找到 (%ld ,%ld ,%ld)\n"
+msgid "%s: partition %zu: failed to set partition UUID"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:1356
+#: disk-utils/sfdisk.c:1294
#, fuzzy, c-format
-msgid "partition %s ends on cylinder %ld, beyond the end of the disk"
-msgstr "分割區 %s 結束於磁柱 %ld，位於磁碟的末端之後\n"
+msgid "%s: partition %zu: failed to get partition name"
+msgstr "%s：無法提取分割區編號"
-#: fdisks/sfdisk.c:1381
+#: disk-utils/sfdisk.c:1311
#, fuzzy, c-format
-msgid ""
-"Warning: shifted start of the extd partition from %lld to %lld\n"
-"(For listing purposes only. Do not change its contents.)"
-msgstr ""
-"警告：Shift 的開始的 extd 分割從 %lld 到 %lld\n"
-"(用於列表宗旨只有。不變更它的內容.)\n"
-
-#: fdisks/sfdisk.c:1386
-#, fuzzy
-msgid ""
-"Warning: extended partition does not start at a cylinder boundary.\n"
-"DOS and Linux will interpret the contents differently."
-msgstr ""
-"警告：擴充分割區非啟始於磁柱邊界。\n"
-"DOS 和 Linux 將對內容有不同解譯。\n"
+msgid "%s: partition %zu: failed to set partition name"
+msgstr "%s：無法提取分割區編號"
-#: fdisks/sfdisk.c:1399
+#: disk-utils/sfdisk.c:1365
#, fuzzy, c-format
-msgid "ERROR: sector %llu does not have an msdos signature"
-msgstr "錯誤：磁區 %lu 沒有 msdos 簽章\n"
+msgid "%s: partition %zu: failed to set partition attributes"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:1406 fdisks/sfdisk.c:1483
+#: disk-utils/sfdisk.c:1402
#, fuzzy, c-format
-msgid "too many partitions - ignoring those past nr (%zu)"
-msgstr "太多分割區 - 忽略那些過去 nr (%ld)\n"
+msgid "%s: failed to set disklabel ID"
+msgstr "%s：無法尋指到交換標籤 "
-#: fdisks/sfdisk.c:1421
+#: disk-utils/sfdisk.c:1417
#, fuzzy
-msgid "tree of partitions?"
-msgstr "分割區的樹狀圖？\n"
+msgid "no relocate operation specified"
+msgstr "沒有 --date 選項指定的。"
-#: fdisks/sfdisk.c:1530
+#: disk-utils/sfdisk.c:1431
#, fuzzy
-msgid "detected Disk Manager - unable to handle that"
-msgstr "偵測到磁碟管理員 - 無法處理它\n"
+msgid "unsupported relocation operation"
+msgstr "不受支援的引數：%s"
-#: fdisks/sfdisk.c:1538
+#: disk-utils/sfdisk.c:1476
#, fuzzy
-msgid "DM6 signature found - giving up"
-msgstr "æ\89¾å\88° DM6 ç°½ç« - æ\94¾æ£\84\n"
+msgid " Commands:\n"
+msgstr "æ²\92æ\9c\89å\91½ä»¤ï¼\9f"
-#: fdisks/sfdisk.c:1558
+#: disk-utils/sfdisk.c:1478
#, fuzzy
-msgid "strange..., an extended partition of size 0?"
-msgstr "å¾\88å¥\87æ\80ªâ\80¦ï¼\8c大å°\8fç\82º 0 ç\9a\84æ\93´å\85\85å\88\86å\89²å\8d\80ï¼\9f\n"
+msgid " write write table to disk and exit\n"
+msgstr "寫å\85¥è¡¨æ ¼å\88°ç£\81ç¢\9fç\84¶å¾\8cé\9b¢é\96\8b"
-#: fdisks/sfdisk.c:1565 fdisks/sfdisk.c:1576
-#, fuzzy
-msgid "strange..., a BSD partition of size 0?"
-msgstr "很奇怪…，大小為 0 的 BSD 分割區？\n"
+#: disk-utils/sfdisk.c:1479
+msgid " quit show new situation and wait for user's feedback before write\n"
+msgstr ""
-#: fdisks/sfdisk.c:1620
-#, fuzzy, c-format
-msgid " %s: unrecognized partition table type"
-msgstr " %s: 無法辨識的分割表類型\n"
+#: disk-utils/sfdisk.c:1480
+msgid " abort exit sfdisk shell\n"
+msgstr ""
-#: fdisks/sfdisk.c:1632
+#: disk-utils/sfdisk.c:1481
#, fuzzy
-msgid "-n flag was given: Nothing changed"
-msgstr "-n 旗標已給定：沒有改變任何東西\n"
+msgid " print display the partition table\n"
+msgstr " p 印出 BSD 分割表"
-#: fdisks/sfdisk.c:1649
-msgid "Failed saving the old sectors - aborting\n"
-msgstr "儲存舊的磁區時失敗 - 放棄\n"
+#: disk-utils/sfdisk.c:1482
+#, fuzzy
+msgid " help show this help text\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: fdisks/sfdisk.c:1654 fdisks/sfdisk.c:1658
-#, fuzzy, c-format
-msgid "Failed writing the partition on %s"
-msgstr "寫入分割區於 %s 時失敗\n"
+#: disk-utils/sfdisk.c:1484
+msgid " Ctrl-D the same as 'quit'\n"
+msgstr ""
-#: fdisks/sfdisk.c:1736
+#: disk-utils/sfdisk.c:1488
#, fuzzy
-msgid "long or incomplete input line - quitting"
-msgstr "長或不完整輸入列 - 離開"
+msgid " Input format:\n"
+msgstr "輸出格式：\n"
-#: fdisks/sfdisk.c:1772
-#, fuzzy, c-format
-msgid "input error: `=' expected after %s field"
-msgstr "輸入錯誤：『=』預期的之後 %s 欄位"
+#: disk-utils/sfdisk.c:1490
+msgid " <start>, <size>, <type>, <bootable>\n"
+msgstr ""
-#: fdisks/sfdisk.c:1779
-#, fuzzy, c-format
-msgid "input error: unexpected character %c after %s field"
-msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
+#: disk-utils/sfdisk.c:1493
+msgid ""
+" <start> Beginning of the partition in sectors, or bytes if\n"
+" specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
+" The default is the first free space.\n"
+msgstr ""
-#: fdisks/sfdisk.c:1785
-#, fuzzy, c-format
-msgid "unrecognized input: %s"
-msgstr "無法辨識的輸入：%s"
+#: disk-utils/sfdisk.c:1498
+msgid ""
+" <size> Size of the partition in sectors, or bytes if\n"
+" specified in the format <number>{K,M,G,T,P,E,Z,Y}.\n"
+" The default is all available space.\n"
+msgstr ""
-#: fdisks/sfdisk.c:1826 fdisks/sfdisk.c:1863
-#, fuzzy
-msgid "number too big"
-msgstr "數字太大\n"
+#: disk-utils/sfdisk.c:1503
+msgid " <type> The partition type. Default is a Linux data partition.\n"
+msgstr ""
-#: fdisks/sfdisk.c:1830 fdisks/sfdisk.c:1867
-#, fuzzy
-msgid "trailing junk after number"
-msgstr "數字之後尾隨無用物\n"
+#: disk-utils/sfdisk.c:1504
+msgid " MBR: hex or L,S,Ex,X,U,R,V shortcuts.\n"
+msgstr ""
-#: fdisks/sfdisk.c:1992
-#, fuzzy
-msgid "no room for partition descriptor"
-msgstr "沒有空間可用於分割區描述\n"
+#: disk-utils/sfdisk.c:1505
+msgid " GPT: UUID or L,S,H,U,R,V shortcuts.\n"
+msgstr ""
-#: fdisks/sfdisk.c:2025
+#: disk-utils/sfdisk.c:1508
#, fuzzy
-msgid "cannot build surrounding extended partition"
-msgstr "無法圍繞擴充分割區建立\n"
+msgid " <bootable> Use '*' to mark an MBR partition as bootable.\n"
+msgstr "您將不能寫入分割表。\n"
-#: fdisks/sfdisk.c:2076
-#, fuzzy
-msgid "too many input fields"
-msgstr "太多輸入欄位\n"
+#: disk-utils/sfdisk.c:1512
+msgid " Example:\n"
+msgstr ""
-#: fdisks/sfdisk.c:2110
+#: disk-utils/sfdisk.c:1514
#, fuzzy
-msgid "No room for more"
-msgstr "沒有空間可容納更多\n"
+msgid " , 4G Creates a 4GiB partition at default start offset.\n"
+msgstr " n 由剩餘空間中新增一塊分割區"
-#: fdisks/sfdisk.c:2129
+#: disk-utils/sfdisk.c:1546 sys-utils/dmesg.c:1674
#, fuzzy
-msgid "Illegal type"
-msgstr "ä¸\8då\90\88æ³\95ç\9a\84é¡\9eå\9e\8b\n"
+msgid "unsupported command"
+msgstr "ä¸\8då\8f\97æ\94¯æ\8f´ç\9a\84å\91½ä»¤"
-#: fdisks/sfdisk.c:2163
+#: disk-utils/sfdisk.c:1548
#, fuzzy, c-format
-msgid "Warning: given size (%llu) exceeds max allowable size (%llu)"
-msgstr "警告：給定的大小 (%lu) 超出所允許的最大值 (%lu)\n"
+msgid "line %d: unsupported command"
+msgstr "不受支援的命令"
-#: fdisks/sfdisk.c:2169
-#, fuzzy
-msgid "Warning: empty partition"
-msgstr "警告：空的分割區\n"
+#: disk-utils/sfdisk.c:1667
+#, c-format
+msgid "The device contains '%s' signature and it may be removed by a write command. See sfdisk(8) man page and --wipe option for more details."
+msgstr ""
-#: fdisks/sfdisk.c:2183
-#, fuzzy, c-format
-msgid "Warning: bad partition start (earliest %llu)"
-msgstr "警告：不當的分割區啟始 (最先 %lu)\n"
+#: disk-utils/sfdisk.c:1674
+#, c-format
+msgid "The device contains '%s' signature and it may remain on the device. It is recommended to wipe the device with wipefs(8) or sfdisk --wipe, in order to avoid possible collisions."
+msgstr ""
-#: fdisks/sfdisk.c:2196
+#: disk-utils/sfdisk.c:1722
#, fuzzy
-msgid "unrecognized bootable flag - choose - or *"
-msgstr "無法辨識的可開機旗標 - 選擇 - 或 *\n"
+msgid "failed to allocate partition name"
+msgstr "加入分割時失敗"
-#: fdisks/sfdisk.c:2213 fdisks/sfdisk.c:2227
+#: disk-utils/sfdisk.c:1761
#, fuzzy
-msgid "partial c,h,s specification?"
-msgstr "é\83¨å\88\86 c,h,s è¦\8fæ ¼ï¼\9f\n"
+msgid "failed to allocate script handler"
+msgstr "é\85\8dç½®è¿ä»£å\99¨æ\99\82失æ\95\97"
-#: fdisks/sfdisk.c:2238
-#, fuzzy
-msgid "Extended partition not where expected"
-msgstr "擴充分割區不在預期的位置\n"
+#: disk-utils/sfdisk.c:1777
+#, fuzzy, c-format
+msgid "%s: cannot modify partition %d: no partition table was found"
+msgstr "%s：無法讀取分割表"
-#: fdisks/sfdisk.c:2270
-#, fuzzy
-msgid "bad input"
-msgstr "不當的輸入"
+#: disk-utils/sfdisk.c:1782
+#, fuzzy, c-format
+msgid "%s: cannot modify partition %d: partition table contains only %zu partitions"
+msgstr "%s：分割表不具任何分割區"
-#: fdisks/sfdisk.c:2293
-#, fuzzy
-msgid "too many partitions"
-msgstr "太å¤\9aå\88\86å\89²å\8d\80\n"
+#: disk-utils/sfdisk.c:1788
+#, fuzzy, c-format
+msgid "warning: %s: partition %d is not defined yet"
+msgstr "å°\9aç\84¡å\88\86å\89²å\8d\80被å®\9a義ï¼\81\n"
-#: fdisks/sfdisk.c:2326
-#, fuzzy
+#: disk-utils/sfdisk.c:1806
+#, c-format
msgid ""
-"Input in the following format; absent fields get a default value.\n"
-"<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
-"Usually you only need to specify <start> and <size> (and perhaps <type>)."
+"\n"
+"Welcome to sfdisk (%s)."
msgstr ""
-"以下列的格式輸入；缺值欄位將取得預設值。\n"
-"<啟始> <大小> <類型 [E,S,L,X, 十六進位]> <可開機 [-,*]> <c,h,s> <c,h,s>\n"
-"常常您只有需要指定 <啟始> 和 <大小> (也許還有 <類型>)。\n"
-#: fdisks/sfdisk.c:2348
-#, fuzzy, c-format
-msgid " %s [options] <device> [...]\n"
-msgstr " %s [選項] <device> [...]\n"
-
-#: fdisks/sfdisk.c:2351
+#: disk-utils/sfdisk.c:1814
#, fuzzy
+msgid "Checking that no-one is using this disk right now ..."
+msgstr "檢查是否沒有人現在正使用這個磁碟…\n"
+
+#: disk-utils/sfdisk.c:1817
msgid ""
-" -s, --show-size list size of a partition\n"
-" -c, --id change or print partition Id\n"
-" --change-id change Id\n"
-" --print-id print Id\n"
+" FAILED\n"
+"\n"
msgstr ""
-" -s, --show-size 清單大小的分割\n"
-" -c, --id 變更或列印分割識別號\n"
-" --change-id 變更識別號\n"
-" --print-id 列印識別號\n"
-#: fdisks/sfdisk.c:2355
+#: disk-utils/sfdisk.c:1820
#, fuzzy
msgid ""
-" -l, --list list partitions of each device\n"
-" -d, --dump idem, but in a format suitable for later input\n"
-" -i, --increment number cylinders etc. from 1 instead of from 0\n"
-" -u, --unit <letter> units to be used; <letter> can be one of\n"
-" S (sectors), C (cylinders), B (blocks), or M "
-"(MB)\n"
+"This disk is currently in use - repartitioning is probably a bad idea.\n"
+"Umount all file systems, and swapoff all swap partitions on this disk.\n"
+"Use the --no-reread flag to suppress this check.\n"
msgstr ""
-" -l, --list 清單分割區的每個裝置\n"
-" -d, --dump idem，但是在中格式適用稍後輸入\n"
-" -i, --increment 數字磁柱等項從 1 以代替從 0\n"
-" -u, --unit <letter> 單位為使用；<字母>可以是之一\n"
-" S (磁區)，C (磁柱)，B (區塊)，或公尺 (MB)\n"
+"\n"
+"這個磁碟目前在使用中 - 重新設定分割區可能不是個好主意。\n"
+"卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n"
+"使用 --no-reread 旗標以抑制這個檢查。\n"
-#: fdisks/sfdisk.c:2360
+#: disk-utils/sfdisk.c:1825
#, fuzzy
-msgid ""
-" -1, --one-only reserved option that does nothing currently\n"
-" -T, --list-types list the known partition types\n"
-" -D, --DOS for DOS-compatibility: waste a little space\n"
-" -E, --DOS-extended DOS extended partition compatibility\n"
-" -R, --re-read make the kernel reread the partition table\n"
-msgstr ""
-" -1, --one-only 保留的選項該沒做任何事目前\n"
-" -T, --list-types 清單已知分割區類型\n"
-" -D, --DOS 用於 DOS-compatibility：waste 小型空格\n"
-" -E, --DOS-extended DOS 進階分割相容性\n"
-" -R, --re-read 製作內核重新讀取分割表\n"
+msgid "Use the --force flag to overrule all checks."
+msgstr "使用 --force 旗標以駁回所有檢查。\n"
-#: fdisks/sfdisk.c:2365
+#: disk-utils/sfdisk.c:1827
#, fuzzy
msgid ""
-" -N <number> change only the partition with this <number>\n"
-" -n do not actually write to disk\n"
-" -O <file> save the sectors that will be overwritten to "
-"<file>\n"
-" -I <file> restore sectors from <file>\n"
-msgstr ""
-" -N <number> 變更只有分割與這個<數字>\n"
-" -n 不實際的寫入磁碟\n"
-" -O<檔案> 儲存磁區該將被覆寫到<檔案>\n"
-" -I<檔案> 還原磁區從<檔案>\n"
+" OK\n"
+"\n"
+msgstr "%s：確定\n"
-#: fdisks/sfdisk.c:2369
+#: disk-utils/sfdisk.c:1836
#, fuzzy
msgid ""
-" -V, --verify check that the listed partitions are reasonable\n"
-" -v, --version display version information and exit\n"
-" -h, --help display this help text and exit\n"
-msgstr ""
-" -V, --verify 檢查該清單的分割區是 reasonable\n"
-" -v, --version 顯示版本資訊然後離開\n"
-" -h, --help 顯示這份說明文字然後離開\n"
+"\n"
+"Old situation:"
+msgstr "舊的情況：\n"
-#: fdisks/sfdisk.c:2373
+#: disk-utils/sfdisk.c:1849
#, fuzzy
+msgid "failed to set script header"
+msgstr "配置迭代器時失敗"
+
+#: disk-utils/sfdisk.c:1854
+#, c-format
msgid ""
"\n"
-"Dangerous options:\n"
+"sfdisk is going to create a new '%s' disk label.\n"
+"Use 'label: <name>' before you define a first partition\n"
+"to override the default."
msgstr ""
-"\n"
-"危險選項：\n"
-#: fdisks/sfdisk.c:2374
+#: disk-utils/sfdisk.c:1857
#, fuzzy
msgid ""
-" -f, --force disable all consistency checking\n"
-" --no-reread do not check whether the partition is in use\n"
-" -q, --quiet suppress warning messages\n"
-" -L, --Linux do not complain about things irrelevant for "
-"Linux\n"
-msgstr ""
-" -f, --force 全部停用一致性檢查\n"
-" --no-reread 不檢查是否分割是在中使用\n"
-" -q, --quiet 抑制警告訊息\n"
-" -L, --Linux 不抱怨關於 irrelevant 用於 Linux\n"
+"\n"
+"Type 'help' to get more information.\n"
+msgstr "嘗試『%s --help』以獲得更多資訊。\n"
-#: fdisks/sfdisk.c:2378
+#: disk-utils/sfdisk.c:1875
#, fuzzy
-msgid ""
-" -g, --show-geometry print the kernel's idea of the geometry\n"
-" -G, --show-pt-geometry print geometry guessed from the partition table\n"
+msgid "All partitions used."
+msgstr "這個分割區已在使用中"
+
+#: disk-utils/sfdisk.c:1895
+#, c-format
+msgid "Unknown script header '%s' -- ignore."
msgstr ""
-" -g, --show-geometry 列印內核主意的幾何位置\n"
-" -G, --show-pt-geometry 列印幾何位置猜測的從分割表\n"
-#: fdisks/sfdisk.c:2380
+#: disk-utils/sfdisk.c:1911
#, fuzzy
-msgid ""
-" -A, --activate[=<device>] activate bootable flag\n"
-" -U, --unhide[=<dev>] set partition unhidden\n"
-" -x, --show-extended also list extended partitions in the output,\n"
-" or expect descriptors for them in the input\n"
-msgstr ""
-" -A, --activate [=<device>] 啟用可開機的旗標\n"
-" -U, --unhide [=<dev>] 設定分割 unhidden\n"
-" -x, --show-extended 也清單進階分割區在中輸出，\n"
-" 或預期描述元用於它們在中輸入\n"
+msgid "Done.\n"
+msgstr "完成。\n"
-#: fdisks/sfdisk.c:2384
+#: disk-utils/sfdisk.c:1923
#, fuzzy
-msgid ""
-" --leave-last do not allocate the last cylinder\n"
-" --IBM same as --leave-last\n"
-msgstr ""
-" --leave-last 不配置最後一筆磁柱\n"
-" --IBM 如同 --leave-last\n"
+msgid "Ignoring partition."
+msgstr "已選分割區 %d\n"
-#: fdisks/sfdisk.c:2386
+#: disk-utils/sfdisk.c:1934
#, fuzzy
-msgid ""
-" --in-order partitions are in order\n"
-" --not-in-order partitions are not in order\n"
-" --inside-outer all logicals inside outermost extended\n"
-" --not-inside-outer not all logicals inside outermost extended\n"
+msgid "Failed to apply script headers, disk label not created"
+msgstr "加入輸出列時失敗"
+
+#: disk-utils/sfdisk.c:1955
+#, fuzzy, c-format
+msgid "Failed to add #%zu partition"
+msgstr "加入分割時失敗"
+
+#: disk-utils/sfdisk.c:1978
+msgid "Script header accepted."
msgstr ""
-" --in-order 分割區是在中排序\n"
-" --not-in-order 分割區不是在中排序\n"
-" --inside-outer 所有邏輯的內部 outermost 進階\n"
-" --not-inside-outer 並非所有邏輯的內部 outermost 進階\n"
-#: fdisks/sfdisk.c:2390
-#, fuzzy
-msgid ""
-" --nested every partition is disjoint from all others\n"
-" --chained like nested, but extended partitions may lie "
-"outside\n"
-" --onesector partitions are mutually disjoint\n"
+#: disk-utils/sfdisk.c:1995
+msgid "Failed to apply script headers, disk label not created."
msgstr ""
-" --nested 每分割是 disjoint 從所有其他人\n"
-" --chained 如同巢狀，但是進階分割區也許會 lie 外側\n"
-" --onesector 分割區是交互 disjoint\n"
-#: fdisks/sfdisk.c:2394
+#: disk-utils/sfdisk.c:2002
#, fuzzy
msgid ""
"\n"
-"Override the detected geometry using:\n"
-" -C, --cylinders <number> set the number of cylinders to use\n"
-" -H, --heads <number> set the number of heads to use\n"
-" -S, --sectors <number> set the number of sectors to use\n"
-msgstr ""
-"\n"
-"強制變更偵測到幾何位置使用：\n"
-" -C, --cylinders <number> 設定磁柱數量以使用\n"
-" -H, --heads<數字> 設定前端數量以使用\n"
-" -S, --sectors<數字> 設定磁區數量以使用\n"
-"\n"
+"New situation:"
+msgstr "新的情況：\n"
-#: fdisks/sfdisk.c:2412
-#, fuzzy, c-format
-msgid " %s%sdevice list active partitions on device\n"
-msgstr "%s 裝置\t\t 列出裝置上的作用中分割區\n"
+#: disk-utils/sfdisk.c:2012
+#, fuzzy
+msgid "Do you want to write this to disk?"
+msgstr "您要將這個寫入磁碟嗎？[ynq] "
+
+#: disk-utils/sfdisk.c:2025
+msgid "Leaving.\n"
+msgstr ""
-#: fdisks/sfdisk.c:2414
+#: disk-utils/sfdisk.c:2040
#, fuzzy, c-format
msgid ""
-" %s%sdevice n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
-msgstr "%s 裝置 n1 n2…啟用分割區 n1…, 停用其餘的\n"
+" %1$s [options] <dev> [[-N] <part>]\n"
+" %1$s [options] <command>\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
-#: fdisks/sfdisk.c:2543
-#, fuzzy
-msgid "no command?"
-msgstr "沒有命令？"
+#: disk-utils/sfdisk.c:2047
+msgid " -A, --activate <dev> [<part> ...] list or set bootable (P)MBR partitions\n"
+msgstr ""
-#: fdisks/sfdisk.c:2612
+#: disk-utils/sfdisk.c:2048
#, fuzzy
-msgid "invalid number of partitions argument"
-msgstr "無效的分割區數量引數"
+msgid " -d, --dump <dev> dump partition table (usable for later input)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: fdisks/sfdisk.c:2682
-#, c-format
-msgid "cannot open %s\n"
-msgstr "無法開啟 %s\n"
+#: disk-utils/sfdisk.c:2049
+#, fuzzy
+msgid " -J, --json <dev> dump partition table in JSON format\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: fdisks/sfdisk.c:2701
-#, c-format
-msgid "total: %llu blocks\n"
-msgstr "總計：%llu 區塊\n"
+#: disk-utils/sfdisk.c:2050
+#, fuzzy
+msgid " -B, --backup-pt-sectors <dev> binary partition table backup (see -b and -O)\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/sfdisk.c:2738
+#: disk-utils/sfdisk.c:2051
+msgid " -g, --show-geometry [<dev> ...] list geometry of all or specified devices\n"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2052
#, fuzzy
-msgid "usage: sfdisk --print-id device partition-number"
-msgstr "用法：sfdisk --print-id 裝置分割區編號"
+msgid " -l, --list [<dev> ...] list partitions of each device\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/sfdisk.c:2740
+#: disk-utils/sfdisk.c:2053
#, fuzzy
-msgid "usage: sfdisk --change-id device partition-number Id"
-msgstr "用法：sfdisk --change-id 裝置分割區編號識別號"
+msgid " -F, --list-free [<dev> ...] list unpartitioned free areas of each device\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/sfdisk.c:2742
+#: disk-utils/sfdisk.c:2054
#, fuzzy
-msgid "usage: sfdisk --id device partition-number [Id]"
-msgstr "用法：sfdisk --id 裝置分割區編號 [識別號]"
+msgid " -r, --reorder <dev> fix partitions order (by start offset)\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/sfdisk.c:2749
+#: disk-utils/sfdisk.c:2055
#, fuzzy
-msgid "can specify only one device (except with -l or -s)"
-msgstr "可以指定只有一個裝置 (除了與 -l 或 -s)"
+msgid " -s, --show-size [<dev> ...] list sizes of all or specified devices\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: fdisks/sfdisk.c:2774
-#, fuzzy, c-format
-msgid "cannot open %s read-write"
-msgstr "無法開啟 %s 可讀可寫"
+#: disk-utils/sfdisk.c:2056
+#, fuzzy
+msgid " -T, --list-types print the recognized types (see -X)\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: fdisks/sfdisk.c:2776
-#, fuzzy, c-format
-msgid "cannot open %s for reading"
-msgstr "無法開啟 %s 用於讀取"
+#: disk-utils/sfdisk.c:2057
+#, fuzzy
+msgid " -V, --verify [<dev> ...] test whether partitions seem correct\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: fdisks/sfdisk.c:2801
-#, fuzzy, c-format
-msgid "%s: OK"
-msgstr "%s：確定\n"
+#: disk-utils/sfdisk.c:2058
+msgid " --delete <dev> [<part> ...] delete all or specified partitions\n"
+msgstr ""
-#: fdisks/sfdisk.c:2820 fdisks/sfdisk.c:2852
-#, c-format
-msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
-msgstr "%s：%ld 磁柱，%ld 磁頭，%ld 磁區/磁軌\n"
+#: disk-utils/sfdisk.c:2061
+msgid " --part-label <dev> <part> [<str>] print or change partition label\n"
+msgstr ""
-#: fdisks/sfdisk.c:2870
-#, fuzzy, c-format
-msgid "Cannot get size of %s"
-msgstr "無法提取大小的 %s"
+#: disk-utils/sfdisk.c:2062
+msgid " --part-type <dev> <part> [<type>] print or change partition type\n"
+msgstr ""
-#: fdisks/sfdisk.c:2950
-#, fuzzy, c-format
-msgid "bad active byte: 0x%x instead of 0x80"
-msgstr "不當的作用中位元組：0x%x 而非 0x80\n"
+#: disk-utils/sfdisk.c:2063
+#, fuzzy
+msgid " --part-uuid <dev> <part> [<uuid>] print or change partition uuid\n"
+msgstr " -c [或 --id]： 印出或變更分割區識別號"
-#: fdisks/sfdisk.c:2978
-#, fuzzy, c-format
-msgid ""
-"You have %d active primary partitions. This does not matter for LILO,\n"
-"but the DOS MBR will only boot a disk with 1 active partition."
+#: disk-utils/sfdisk.c:2064
+msgid " --part-attrs <dev> <part> [<str>] print or change partition attributes\n"
msgstr ""
-"您有 %d 塊作用中的主要分割區。這個不會影響到 LILO，\n"
-"但是 DOS MBR 只能將具有一塊作用中分割區的磁碟開機。\n"
-#: fdisks/sfdisk.c:2999
-#, fuzzy, c-format
-msgid "partition %s has id %x and is not hidden"
-msgstr "分割 %s 有識別號 %x 和未被隱藏"
+#: disk-utils/sfdisk.c:2067
+msgid " --disk-id <dev> [<str>] print or change disk label ID (UUID)\n"
+msgstr ""
-#: fdisks/sfdisk.c:3062
-#, fuzzy, c-format
-msgid "Bad Id %lx"
-msgstr "不當的識別號 %lx"
+#: disk-utils/sfdisk.c:2068
+#, fuzzy
+msgid " --relocate <oper> <dev> move partition header\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/sfdisk.c:3083
+#: disk-utils/sfdisk.c:2071
#, fuzzy
-msgid "This disk is currently in use."
-msgstr "這個磁碟為目前在使用中。\n"
+msgid " <dev> device (usually disk) path\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: fdisks/sfdisk.c:3103
-#, fuzzy, c-format
-msgid "Fatal error: cannot find %s"
-msgstr "嚴重錯誤：找不到 %s"
+#: disk-utils/sfdisk.c:2072
+#, fuzzy
+msgid " <part> partition number\n"
+msgstr " -N# ： 只變更編號為 # 的分割區"
-#: fdisks/sfdisk.c:3105
-#, fuzzy, c-format
-msgid "Warning: %s is not a block device"
-msgstr "警告：%s 並非區塊裝置\n"
+#: disk-utils/sfdisk.c:2073
+msgid " <type> partition type, GUID for GPT, hex for MBR\n"
+msgstr ""
-#: fdisks/sfdisk.c:3111
+#: disk-utils/sfdisk.c:2076
#, fuzzy
-msgid "Checking that no-one is using this disk right now ..."
-msgstr "檢查是否沒有人現在正使用這個磁碟…\n"
+msgid " -a, --append append partitions to existing partition table\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/sfdisk.c:3113
+#: disk-utils/sfdisk.c:2077
#, fuzzy
-msgid ""
-"\n"
-"This disk is currently in use - repartitioning is probably a bad idea.\n"
-"Umount all file systems, and swapoff all swap partitions on this disk.\n"
-"Use the --no-reread flag to suppress this check."
+msgid " -b, --backup backup partition table sectors (see -O)\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: disk-utils/sfdisk.c:2078
+#, fuzzy
+msgid " --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: disk-utils/sfdisk.c:2079
+msgid " --move-data[=<typescript>] move partition data after relocation (requires -N)\n"
msgstr ""
-"\n"
-"這個磁碟目前在使用中 - 重新設定分割區可能不是個好主意。\n"
-"卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n"
-"使用 --no-reread 旗標以抑制這個檢查。\n"
-#: fdisks/sfdisk.c:3117
+#: disk-utils/sfdisk.c:2080
+msgid " --move-use-fsync use fsync after each write when move data\n"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2081
#, fuzzy
-msgid "Use the --force flag to overrule all checks."
-msgstr "使用 --force 旗標以駁回所有檢查。\n"
+msgid " -f, --force disable all consistency checking\n"
+msgstr "您可以停用所有的一致性檢查藉由："
-#: fdisks/sfdisk.c:3119
+#: disk-utils/sfdisk.c:2084
+#, fuzzy, c-format
+msgid " --color[=<when>] colorize output (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: disk-utils/sfdisk.c:2089
#, fuzzy
-msgid "OK"
-msgstr "確定\n"
+msgid " -N, --partno <num> specify partition number\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: fdisks/sfdisk.c:3128
-#, c-format
-msgid "Old situation:\n"
-msgstr "舊的情況：\n"
+#: disk-utils/sfdisk.c:2090
+#, fuzzy
+msgid " -n, --no-act do everything except write to device\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: fdisks/sfdisk.c:3132
-#, fuzzy, c-format
-msgid "Partition %d does not exist, cannot change it"
-msgstr "分割 %d 不存在，無法變更它"
+#: disk-utils/sfdisk.c:2091
+#, fuzzy
+msgid " --no-reread do not check whether the device is in use\n"
+msgstr " -c 清空螢幕之前顯示\n"
-#: fdisks/sfdisk.c:3140
-#, c-format
-msgid "New situation:\n"
-msgstr "新的情況：\n"
+#: disk-utils/sfdisk.c:2092
+#, fuzzy
+msgid " --no-tell-kernel do not tell kernel about changes\n"
+msgstr " -f 不分割長列\n"
-#: fdisks/sfdisk.c:3145
+#: disk-utils/sfdisk.c:2093
+msgid " -O, --backup-file <path> override default backup file name\n"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2094
#, fuzzy
-msgid ""
-"I don't like these partitions - nothing changed.\n"
-"(If you really want this, use the --force option.)"
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: disk-utils/sfdisk.c:2095
+#, fuzzy
+msgid " -q, --quiet suppress extra info messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: disk-utils/sfdisk.c:2097
+#, fuzzy, c-format
+msgid " -w, --wipe <mode> wipe signatures (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: disk-utils/sfdisk.c:2100
+#, fuzzy
+msgid " -X, --label <name> specify label type (dos, gpt, ...)\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: disk-utils/sfdisk.c:2101
+msgid " -Y, --label-nested <name> specify nested label type (dos, bsd)\n"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2103
+msgid " -G, --show-pt-geometry deprecated, alias to --show-geometry\n"
msgstr ""
-"我不如同這些分割區 - 沒有任何東西變更。\n"
-"(如果您真的要想要這個，使用 --force 選項.)"
-#: fdisks/sfdisk.c:3148
+#: disk-utils/sfdisk.c:2104
+#, fuzzy
+msgid " -L, --Linux deprecated, only for backward compatibility\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: disk-utils/sfdisk.c:2105
#, fuzzy
-msgid "I don't like this - probably you should answer No"
-msgstr "我不喜歡這個 - 您也許應該回答 No\n"
+msgid " -u, --unit S deprecated, only sector unit is supported\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: disk-utils/sfdisk.c:2239
+#, c-format
+msgid "%s is deprecated in favour of --part-type"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2244
+msgid "--id is deprecated in favour of --part-type"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2260
+msgid "--show-pt-geometry is no more implemented. Using --show-geometry."
+msgstr ""
+
+#: disk-utils/sfdisk.c:2272
+msgid "--Linux option is unnecessary and deprecated"
+msgstr ""
+
+#: disk-utils/sfdisk.c:2301
+#, fuzzy, c-format
+msgid "unsupported unit '%c'"
+msgstr "不受支援的引數：%s"
+
+#: disk-utils/sfdisk.c:2396
+msgid "--movedata requires -N"
+msgstr ""
-#. TRANSLATORS: sfdisk uses rpmatch which means the answers y and n
-#. * should be translated, but that is not the case with q answer.
-#: fdisks/sfdisk.c:3155
+#: disk-utils/swaplabel.c:74
#, c-format
-msgid "Are you satisfied with this? [ynq] "
-msgstr "您滿意這個嗎？[ynq] "
+msgid "failed to parse UUID: %s"
+msgstr "剖析 UUID 時失敗：%s"
-#: fdisks/sfdisk.c:3157
+#: disk-utils/swaplabel.c:78
#, c-format
-msgid "Do you want to write this to disk? [ynq] "
-msgstr "您要將這個寫入磁碟嗎？[ynq] "
+msgid "%s: failed to seek to swap UUID"
+msgstr "%s：無法尋指到交換 UUID"
-#: fdisks/sfdisk.c:3160
-#, fuzzy
-msgid "Quitting - nothing changed"
-msgstr "離開 - 沒有任何東西變更"
+#: disk-utils/swaplabel.c:82
+#, c-format
+msgid "%s: failed to write UUID"
+msgstr "%s：無法寫入 UUID"
-#: fdisks/sfdisk.c:3166
+#: disk-utils/swaplabel.c:93
#, c-format
-msgid "Please answer one of y,n,q\n"
-msgstr "請以 y,n,q 之一回答\n"
+msgid "%s: failed to seek to swap label "
+msgstr "%s：無法尋指到交換標籤 "
-#: fdisks/sfdisk.c:3174
+#: disk-utils/swaplabel.c:100
#, c-format
-msgid ""
-"Successfully wrote the new partition table\n"
-"\n"
+msgid "label is too long. Truncating it to '%s'"
+msgstr "標籤太長。將它截斷為「%s」"
+
+#: disk-utils/swaplabel.c:103
+#, c-format
+msgid "%s: failed to write label"
+msgstr "%s：無法寫入標籤"
+
+#: disk-utils/swaplabel.c:127
+msgid "Display or change the label or UUID of a swap area.\n"
msgstr ""
-"成功寫入新的分割表\n"
-"\n"
-#: fdisks/sfdisk.c:3182
+#: disk-utils/swaplabel.c:130
#, fuzzy
msgid ""
-"If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
-"to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
-"(See fdisk(8).)"
+" -L, --label <label> specify a new label\n"
+" -U, --uuid <uuid> specify a new uuid\n"
msgstr ""
-"如果您建立或變更 DOS 分割區(假設是 /dev/foo7)，就得使用 dd(1)\n"
-"將開頭的 512 位元組歸零：dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
-"(參看 fdisk(8).)\n"
+" -L, --label <label> 指定新的標貼\n"
+" -U, --uuid<uuid> 指定新的 uuid\n"
+
+#: disk-utils/swaplabel.c:171
+msgid "ignore -U (UUIDs are unsupported)"
+msgstr "忽略 -U (UUIDs 不受支援)"
+
+#: include/c.h:301
+#, fuzzy, c-format
+msgid "Try '%s --help' for more information.\n"
+msgstr "嘗試『%s --help』以獲得更多資訊。\n"
-#: include/c.h:275 misc-utils/getopt.c:314 misc-utils/look.c:366
-#: misc-utils/mcookie.c:68 misc-utils/namei.c:418 misc-utils/uuidd.c:70
-#: misc-utils/uuidgen.c:34 misc-utils/wipefs.c:409 sys-utils/hwclock.c:1442
-#: sys-utils/renice.c:55 term-utils/script.c:130 term-utils/scriptreplay.c:40
-#: term-utils/setterm.c:676 term-utils/write.c:80
+#: include/c.h:446
#, fuzzy
msgid ""
"\n"
"\n"
"用法：\n"
-#: include/c.h:277 sys-utils/ipcs.c:59 sys-utils/ipcs.c:65
+#: include/c.h:447
+msgid ""
+"\n"
+"Options:\n"
+msgstr ""
+"\n"
+"選項：\n"
+
+#: include/c.h:448
#, fuzzy
-msgid "\n"
-msgstr "\n"
+msgid ""
+"\n"
+"Functions:\n"
+msgstr ""
+"\n"
+"函式：\n"
+
+#: include/c.h:449
+msgid ""
+"\n"
+"Commands:\n"
+msgstr ""
-#: include/c.h:278
+#: include/c.h:450
#, fuzzy
-msgid " -h, --help display this help and exit\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+msgid ""
+"\n"
+"Arguments:\n"
+msgstr "不當的引數"
+
+#: include/c.h:451
+#, fuzzy
+msgid ""
+"\n"
+"Available output columns:\n"
+msgstr ""
+"\n"
+"可用欄位：\n"
-#: include/c.h:279
+#: include/c.h:454
#, fuzzy
-msgid " -V, --version output version information and exit\n"
-msgstr " -V, --version 輸出版本資訊然後離開\n"
+msgid "display this help"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: include/c.h:455
+msgid "display version"
+msgstr ""
+
+#: include/c.h:465
+#, c-format
+msgid ""
+" %s arguments may be followed by the suffixes for\n"
+" GiB, TiB, PiB, EiB, ZiB, and YiB (the \"iB\" is optional)\n"
+msgstr ""
-#: include/c.h:280
+#: include/c.h:468
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"以獲得更多細節參看 %s。\n"
-#: include/c.h:282 schedutils/chrt.c:266 schedutils/ionice.c:171
-#: schedutils/taskset.c:166 sys-utils/chcpu.c:307 sys-utils/cytune.c:378
-#: sys-utils/dmesg.c:1328 sys-utils/hwclock.c:1422 sys-utils/lscpu.c:1453
-#: sys-utils/renice.c:102 sys-utils/rtcwake.c:474 sys-utils/tunelp.c:249
-#: term-utils/agetty.c:723 term-utils/script.c:212
-#: term-utils/scriptreplay.c:172 term-utils/setterm.c:812
-#: term-utils/write.c:113 text-utils/col.c:208 text-utils/colcrt.c:118
-#: text-utils/colrm.c:174 text-utils/column.c:152 text-utils/rev.c:124
-#: text-utils/tailf.c:264 text-utils/ul.c:196
+#: include/c.h:470
#, c-format
msgid "%s from %s\n"
msgstr "%s 來自 %s\n"
-#: include/closestream.h:41 include/closestream.h:43 login-utils/vipw.c:280
-#: login-utils/vipw.c:299 mount-deprecated/mount_mntent.c:58
-#: sys-utils/rtcwake.c:276 term-utils/script.c:290 term-utils/script.c:300
-#: term-utils/script.c:413 term-utils/script.c:424 term-utils/script.c:492
-#: term-utils/setterm.c:1118 term-utils/wall.c:306 text-utils/col.c:144
+#: include/c.h:492 misc-utils/kill.c:237 term-utils/agetty.c:704
#, fuzzy, c-format
+msgid "%s from %s"
+msgstr "%s 來自 %s\n"
+
+#: include/c.h:496
+msgid "features:"
+msgstr ""
+
+#: include/closestream.h:74 include/closestream.h:76 login-utils/vipw.c:272
+#: login-utils/vipw.c:291 sys-utils/rtcwake.c:304 term-utils/setterm.c:833
+#, fuzzy
msgid "write error"
msgstr "寫入錯誤"
-#: include/optutils.h:81
+#: include/colors.h:27
+#, fuzzy
+msgid "colors are enabled by default"
+msgstr "預設會拒絕從 %2$s 登入到 %1$s。\n"
+
+#: include/colors.h:29
+#, fuzzy
+msgid "colors are disabled by default"
+msgstr "預設會拒絕從 %2$s 登入到 %1$s。\n"
+
+#: include/env.h:26 lib/pager.c:158 login-utils/login.c:1203
+#: login-utils/login.c:1207 term-utils/agetty.c:1241
#, fuzzy, c-format
-msgid "%s: options "
-msgstr "%s：選項 "
+msgid "failed to set the %s environment variable"
+msgstr "設定 %s 資源限制時失敗"
-#: include/optutils.h:93
+#: include/optutils.h:89
#, fuzzy, c-format
-msgid "are mutually exclusive."
+msgid "%s: mutually exclusive arguments:"
msgstr "彼此互斥。"
-#: include/pt-mbr-partnames.h:1
-msgid "Empty"
-msgstr "空"
+#: include/pt-gpt-partnames.h:15
+msgid "EFI System"
+msgstr ""
-#: include/pt-mbr-partnames.h:2
-msgid "FAT12"
-msgstr "FAT12"
+#: include/pt-gpt-partnames.h:17
+#, fuzzy
+msgid "MBR partition scheme"
+msgstr "分割名稱"
-#: include/pt-mbr-partnames.h:3
-msgid "XENIX root"
-msgstr "XENIX root"
+#: include/pt-gpt-partnames.h:18
+msgid "Intel Fast Flash"
+msgstr ""
-#: include/pt-mbr-partnames.h:4
-msgid "XENIX usr"
-msgstr "XENIX usr"
+#: include/pt-gpt-partnames.h:21
+#, fuzzy
+msgid "BIOS boot"
+msgstr "FreeBSD"
-#: include/pt-mbr-partnames.h:5
-msgid "FAT16 <32M"
-msgstr "FAT16 <32M"
+#: include/pt-gpt-partnames.h:24
+#, fuzzy
+msgid "Sony boot partition"
+msgstr "選取可開機的分割"
-#: include/pt-mbr-partnames.h:6
-msgid "Extended"
-msgstr "延伸"
+#: include/pt-gpt-partnames.h:25
+#, fuzzy
+msgid "Lenovo boot partition"
+msgstr "選取可開機的分割"
-#: include/pt-mbr-partnames.h:7
-msgid "FAT16"
-msgstr "FAT16"
+#: include/pt-gpt-partnames.h:28
+#, fuzzy
+msgid "PowerPC PReP boot"
+msgstr "PPC PReP 開機"
-#: include/pt-mbr-partnames.h:8
+#: include/pt-gpt-partnames.h:31
#, fuzzy
-msgid "HPFS/NTFS/exFAT"
-msgstr "HPFS/NTFS/exFAT"
+msgid "ONIE boot"
+msgstr "FreeBSD"
-#: include/pt-mbr-partnames.h:9
-msgid "AIX"
-msgstr "AIX"
+#: include/pt-gpt-partnames.h:32
+msgid "ONIE config"
+msgstr ""
-#: include/pt-mbr-partnames.h:10
-msgid "AIX bootable"
-msgstr "AIX 可開機"
+#: include/pt-gpt-partnames.h:35
+msgid "Microsoft reserved"
+msgstr ""
-#: include/pt-mbr-partnames.h:11
-msgid "OS/2 Boot Manager"
-msgstr "OS/2 開機管理員"
+#: include/pt-gpt-partnames.h:36
+msgid "Microsoft basic data"
+msgstr ""
-#: include/pt-mbr-partnames.h:12
-msgid "W95 FAT32"
-msgstr "W95 FAT32"
+#: include/pt-gpt-partnames.h:37
+msgid "Microsoft LDM metadata"
+msgstr ""
-#: include/pt-mbr-partnames.h:13
-msgid "W95 FAT32 (LBA)"
-msgstr "W95 FAT32 (LBA)"
+#: include/pt-gpt-partnames.h:38
+msgid "Microsoft LDM data"
+msgstr ""
-#: include/pt-mbr-partnames.h:14
-msgid "W95 FAT16 (LBA)"
-msgstr "W95 FAT16 (LBA)"
+#: include/pt-gpt-partnames.h:39
+msgid "Windows recovery environment"
+msgstr ""
-#: include/pt-mbr-partnames.h:15
-msgid "W95 Ext'd (LBA)"
-msgstr "W95 Ext'd (LBA)"
+#: include/pt-gpt-partnames.h:40
+msgid "IBM General Parallel Fs"
+msgstr ""
-#: include/pt-mbr-partnames.h:16
-msgid "OPUS"
-msgstr "OPUS"
+#: include/pt-gpt-partnames.h:41
+msgid "Microsoft Storage Spaces"
+msgstr ""
-#: include/pt-mbr-partnames.h:17
-msgid "Hidden FAT12"
-msgstr "隱藏 FAT12"
+#: include/pt-gpt-partnames.h:44
+#, fuzzy
+msgid "HP-UX data"
+msgstr "刪除分割"
-#: include/pt-mbr-partnames.h:18
-msgid "Compaq diagnostics"
-msgstr "Compaq 診斷"
+#: include/pt-gpt-partnames.h:45
+#, fuzzy
+msgid "HP-UX service"
+msgstr "已無多餘的分割區"
-#: include/pt-mbr-partnames.h:19
-msgid "Hidden FAT16 <32M"
-msgstr "隱藏 FAT16 <32M"
+#: include/pt-gpt-partnames.h:48 libfdisk/src/sgi.c:60 libfdisk/src/sun.c:51
+msgid "Linux swap"
+msgstr "Linux swap"
-#: include/pt-mbr-partnames.h:20
-msgid "Hidden FAT16"
-msgstr "隱藏 FAT16"
+#: include/pt-gpt-partnames.h:49
+#, fuzzy
+msgid "Linux filesystem"
+msgstr "檔案系統型態"
-#: include/pt-mbr-partnames.h:21
-msgid "Hidden HPFS/NTFS"
-msgstr "隱藏 HPFS/NTFS"
+#: include/pt-gpt-partnames.h:50
+#, fuzzy
+msgid "Linux server data"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:22
-msgid "AST SmartSleep"
-msgstr "AST 智慧休眠"
+#: include/pt-gpt-partnames.h:51
+msgid "Linux root (x86)"
+msgstr ""
-#: include/pt-mbr-partnames.h:23
-msgid "Hidden W95 FAT32"
-msgstr "隱藏 W95 FAT32"
+#: include/pt-gpt-partnames.h:52
+msgid "Linux root (x86-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:24
-msgid "Hidden W95 FAT32 (LBA)"
-msgstr "隱藏 W95 FAT32 (LBA)"
+#: include/pt-gpt-partnames.h:53
+#, fuzzy
+msgid "Linux root (Alpha)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:25
-msgid "Hidden W95 FAT16 (LBA)"
-msgstr "隱藏 W95 FAT16 (LBA)"
+#: include/pt-gpt-partnames.h:54
+#, fuzzy
+msgid "Linux root (ARC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:26
-msgid "NEC DOS"
-msgstr "NEC DOS"
+#: include/pt-gpt-partnames.h:55
+msgid "Linux root (ARM)"
+msgstr ""
-#: include/pt-mbr-partnames.h:27
-#, fuzzy
-msgid "Hidden NTFS WinRE"
-msgstr "隱藏 NTFS WinRE"
+#: include/pt-gpt-partnames.h:56
+msgid "Linux root (ARM-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:28
-msgid "Plan 9"
-msgstr "Plan 9"
+#: include/pt-gpt-partnames.h:57
+msgid "Linux root (IA-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:29
-msgid "PartitionMagic recovery"
-msgstr "PartitionMagic 復原"
+#: include/pt-gpt-partnames.h:58
+msgid "Linux root (LoongArch-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:30
-msgid "Venix 80286"
-msgstr "Venix 80286"
+#: include/pt-gpt-partnames.h:59
+#, fuzzy
+msgid "Linux root (MIPS-32 LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:31
-msgid "PPC PReP Boot"
-msgstr "PPC PReP 開機"
+#: include/pt-gpt-partnames.h:60
+#, fuzzy
+msgid "Linux root (MIPS-64 LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:32
-msgid "SFS"
-msgstr "SFS"
+#: include/pt-gpt-partnames.h:61
+#, fuzzy
+msgid "Linux root (HPPA/PARISC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:33
-msgid "QNX4.x"
-msgstr "QNX4.x"
+#: include/pt-gpt-partnames.h:62
+#, fuzzy
+msgid "Linux root (PPC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:34
-msgid "QNX4.x 2nd part"
-msgstr "QNX4.x 第二部分"
+#: include/pt-gpt-partnames.h:63
+#, fuzzy
+msgid "Linux root (PPC64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:35
-msgid "QNX4.x 3rd part"
-msgstr "QNX4.x 第三部分"
+#: include/pt-gpt-partnames.h:64
+#, fuzzy
+msgid "Linux root (PPC64LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:36
-msgid "OnTrack DM"
-msgstr "OnTrack DM"
+#: include/pt-gpt-partnames.h:65
+msgid "Linux root (RISC-V-32)"
+msgstr ""
-#: include/pt-mbr-partnames.h:37
-msgid "OnTrack DM6 Aux1"
-msgstr "OnTrack DM6 Aux1"
+#: include/pt-gpt-partnames.h:66
+msgid "Linux root (RISC-V-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:38
-msgid "CP/M"
-msgstr "CP/M"
+#: include/pt-gpt-partnames.h:67
+#, fuzzy
+msgid "Linux root (S390)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:39
-msgid "OnTrack DM6 Aux3"
-msgstr "OnTrack DM6 Aux3"
+#: include/pt-gpt-partnames.h:68
+#, fuzzy
+msgid "Linux root (S390X)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:40
-msgid "OnTrackDM6"
-msgstr "OnTrackDM6"
+#: include/pt-gpt-partnames.h:69
+#, fuzzy
+msgid "Linux root (TILE-Gx)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:41
-msgid "EZ-Drive"
-msgstr "EZ-Drive"
+#: include/pt-gpt-partnames.h:70
+#, fuzzy
+msgid "Linux reserved"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:42
-msgid "Golden Bow"
-msgstr "Golden Bow"
+#: include/pt-gpt-partnames.h:71
+#, fuzzy
+msgid "Linux home"
+msgstr "Linux"
-#: include/pt-mbr-partnames.h:43
-msgid "Priam Edisk"
-msgstr "Priam Edisk"
+#: include/pt-gpt-partnames.h:72 libfdisk/src/sgi.c:63
+msgid "Linux RAID"
+msgstr "Linux RAID"
-#: include/pt-mbr-partnames.h:44 include/pt-mbr-partnames.h:88
-#: include/pt-mbr-partnames.h:94 include/pt-mbr-partnames.h:95
-msgid "SpeedStor"
-msgstr "SpeedStor"
+#: include/pt-gpt-partnames.h:73 include/pt-mbr-partnames.h:65
+#: libfdisk/src/sgi.c:62 libfdisk/src/sun.c:53
+msgid "Linux LVM"
+msgstr "Linux LVM"
-#: include/pt-mbr-partnames.h:45
-msgid "GNU HURD or SysV"
-msgstr "GNU HURD 或 SysV"
+#: include/pt-gpt-partnames.h:74
+#, fuzzy
+msgid "Linux variable data"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:46
-msgid "Novell Netware 286"
-msgstr "Novell Netware 286"
+#: include/pt-gpt-partnames.h:75
+#, fuzzy
+msgid "Linux temporary data"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:47
-msgid "Novell Netware 386"
-msgstr "Novell Netware 386"
+#: include/pt-gpt-partnames.h:76
+msgid "Linux /usr (x86)"
+msgstr ""
-#: include/pt-mbr-partnames.h:48
-msgid "DiskSecure Multi-Boot"
-msgstr "DiskSecure 多種開機"
+#: include/pt-gpt-partnames.h:77
+msgid "Linux /usr (x86-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:49
-msgid "PC/IX"
-msgstr "PC/IX"
+#: include/pt-gpt-partnames.h:78
+#, fuzzy
+msgid "Linux /usr (Alpha)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:50
-msgid "Old Minix"
-msgstr "舊版 Minix"
+#: include/pt-gpt-partnames.h:79
+#, fuzzy
+msgid "Linux /usr (ARC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:51
-msgid "Minix / old Linux"
-msgstr "Minix / 舊版 Linux"
+#: include/pt-gpt-partnames.h:80
+msgid "Linux /usr (ARM)"
+msgstr ""
-#: include/pt-mbr-partnames.h:52
-msgid "Linux swap / Solaris"
-msgstr "Linux 交換區/ Solaris"
+#: include/pt-gpt-partnames.h:81
+msgid "Linux /usr (ARM-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:53
-msgid "Linux"
-msgstr "Linux"
+#: include/pt-gpt-partnames.h:82
+msgid "Linux /usr (IA-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:54
-msgid "OS/2 hidden C: drive"
-msgstr "OS/2 隱藏 C: 磁碟"
+#: include/pt-gpt-partnames.h:83
+msgid "Linux /usr (LoongArch-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:55
-msgid "Linux extended"
-msgstr "Linux 擴展"
+#: include/pt-gpt-partnames.h:84
+#, fuzzy
+msgid "Linux /usr (MIPS-32 LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:56 include/pt-mbr-partnames.h:57
-msgid "NTFS volume set"
-msgstr "NTFS 卷冊集"
+#: include/pt-gpt-partnames.h:85
+#, fuzzy
+msgid "Linux /usr (MIPS-64 LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:58
-msgid "Linux plaintext"
-msgstr "Linux 純文字"
+#: include/pt-gpt-partnames.h:86
+#, fuzzy
+msgid "Linux /usr (HPPA/PARISC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:59 libfdisk/src/gpt.c:164 libfdisk/src/sgi.c:55
-#: libfdisk/src/sun.c:46
-msgid "Linux LVM"
-msgstr "Linux LVM"
+#: include/pt-gpt-partnames.h:87
+#, fuzzy
+msgid "Linux /usr (PPC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:60
-msgid "Amoeba"
-msgstr "Amoeba"
+#: include/pt-gpt-partnames.h:88
+#, fuzzy
+msgid "Linux /usr (PPC64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:61
-msgid "Amoeba BBT"
-msgstr "Amoeba BBT"
+#: include/pt-gpt-partnames.h:89
+#, fuzzy
+msgid "Linux /usr (PPC64LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:62
-msgid "BSD/OS"
-msgstr "BSD/OS"
+#: include/pt-gpt-partnames.h:90
+#, fuzzy
+msgid "Linux /usr (RISC-V-32)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:63
-msgid "IBM Thinkpad hibernation"
-msgstr "IBM Thinkpad hibernation"
+#: include/pt-gpt-partnames.h:91
+#, fuzzy
+msgid "Linux /usr (RISC-V-64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:64
-msgid "FreeBSD"
-msgstr "FreeBSD"
+#: include/pt-gpt-partnames.h:92
+#, fuzzy
+msgid "Linux /usr (S390)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:65
-msgid "OpenBSD"
-msgstr "OpenBSD"
+#: include/pt-gpt-partnames.h:93
+#, fuzzy
+msgid "Linux /usr (S390X)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:66
-msgid "NeXTSTEP"
-msgstr "NeXTSTEP"
+#: include/pt-gpt-partnames.h:94
+#, fuzzy
+msgid "Linux /usr (TILE-Gx)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:67
-msgid "Darwin UFS"
-msgstr "Darwin UFS"
+#: include/pt-gpt-partnames.h:95
+msgid "Linux root verity (x86)"
+msgstr ""
-#: include/pt-mbr-partnames.h:68
-msgid "NetBSD"
-msgstr "NetBSD"
+#: include/pt-gpt-partnames.h:96
+msgid "Linux root verity (x86-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:69
-msgid "Darwin boot"
-msgstr "Darwin 開機"
+#: include/pt-gpt-partnames.h:97
+#, fuzzy
+msgid "Linux root verity (Alpha)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:70
-msgid "HFS / HFS+"
-msgstr "HFS / HFS+"
+#: include/pt-gpt-partnames.h:98
+#, fuzzy
+msgid "Linux root verity (ARC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:71
-msgid "BSDI fs"
-msgstr "BSDI fs"
+#: include/pt-gpt-partnames.h:99
+msgid "Linux root verity (ARM)"
+msgstr ""
-#: include/pt-mbr-partnames.h:72
-msgid "BSDI swap"
-msgstr "BSDI 交換區"
+#: include/pt-gpt-partnames.h:100
+msgid "Linux root verity (ARM-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:73
-msgid "Boot Wizard hidden"
-msgstr "開機精靈隱藏"
+#: include/pt-gpt-partnames.h:101
+msgid "Linux root verity (IA-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:74 libfdisk/src/gpt.c:186
-msgid "Solaris boot"
-msgstr "Solaris 開機"
+#: include/pt-gpt-partnames.h:102
+#, fuzzy
+msgid "Linux root verity (LoongArch-64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:75
-msgid "Solaris"
-msgstr "Solaris"
+#: include/pt-gpt-partnames.h:103
+#, fuzzy
+msgid "Linux root verity (MIPS-32 LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:76
-msgid "DRDOS/sec (FAT-12)"
-msgstr "DRDOS/sec (FAT-12)"
+#: include/pt-gpt-partnames.h:104
+#, fuzzy
+msgid "Linux root verity (MIPS-64 LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:77
-msgid "DRDOS/sec (FAT-16 < 32M)"
-msgstr "DRDOS/sec (FAT-16 < 32M)"
+#: include/pt-gpt-partnames.h:105
+#, fuzzy
+msgid "Linux root verity (HPPA/PARISC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:78
-msgid "DRDOS/sec (FAT-16)"
-msgstr "DRDOS/sec (FAT-16)"
+#: include/pt-gpt-partnames.h:106
+#, fuzzy
+msgid "Linux root verity (PPC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:79
-msgid "Syrinx"
-msgstr "Syrinx"
+#: include/pt-gpt-partnames.h:107
+#, fuzzy
+msgid "Linux root verity (PPC64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:80
-msgid "Non-FS data"
-msgstr "Non-FS 資料"
+#: include/pt-gpt-partnames.h:108
+#, fuzzy
+msgid "Linux root verity (PPC64LE)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:81
-msgid "CP/M / CTOS / ..."
-msgstr "CP/M / CTOS /…"
+#: include/pt-gpt-partnames.h:109
+#, fuzzy
+msgid "Linux root verity (RISC-V-32)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:83
-msgid "Dell Utility"
-msgstr "Dell 公用程式"
+#: include/pt-gpt-partnames.h:110
+#, fuzzy
+msgid "Linux root verity (RISC-V-64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:84
-msgid "BootIt"
-msgstr "BootIt"
+#: include/pt-gpt-partnames.h:111
+#, fuzzy
+msgid "Linux root verity (S390)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:85
-msgid "DOS access"
-msgstr "DOS 存取"
+#: include/pt-gpt-partnames.h:112
+#, fuzzy
+msgid "Linux root verity (S390X)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:87
-msgid "DOS R/O"
-msgstr "DOS R/O"
+#: include/pt-gpt-partnames.h:113
+#, fuzzy
+msgid "Linux root verity (TILE-Gx)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:90
-msgid "BeOS fs"
-msgstr "BeOS fs"
+#: include/pt-gpt-partnames.h:114
+#, fuzzy
+msgid "Linux /usr verity (x86)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:92
-msgid "EFI (FAT-12/16/32)"
-msgstr "EFI (FAT-12/16/32)"
+#: include/pt-gpt-partnames.h:115
+msgid "Linux /usr verity (x86-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:93
-msgid "Linux/PA-RISC boot"
-msgstr "Linux/PA-RISC 開機"
+#: include/pt-gpt-partnames.h:116
+#, fuzzy
+msgid "Linux /usr verity (Alpha)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:96
-msgid "DOS secondary"
-msgstr "DOS 次級"
+#: include/pt-gpt-partnames.h:117
+#, fuzzy
+msgid "Linux /usr verity (ARC)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:97
-msgid "VMware VMFS"
-msgstr "VMware VMFS"
+#: include/pt-gpt-partnames.h:118
+#, fuzzy
+msgid "Linux /usr verity (ARM)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:98
-msgid "VMware VMKCORE"
-msgstr "VMware VMKCORE"
+#: include/pt-gpt-partnames.h:119
+msgid "Linux /usr verity (ARM-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:99 libfdisk/src/sun.c:47
-msgid "Linux raid autodetect"
-msgstr "Linux raid 自動偵測"
+#: include/pt-gpt-partnames.h:120
+msgid "Linux /usr verity (IA-64)"
+msgstr ""
-#: include/pt-mbr-partnames.h:102
-msgid "LANstep"
-msgstr "LANstep"
+#: include/pt-gpt-partnames.h:121
+#, fuzzy
+msgid "Linux /usr verity (LoongArch-64)"
+msgstr "SunOS 保留區"
-#: include/pt-mbr-partnames.h:103
-msgid "BBT"
-msgstr "BBT"
+#: include/pt-gpt-partnames.h:122
+#, fuzzy
+msgid "Linux /usr verity (MIPS-32 LE)"
+msgstr "SunOS 保留區"
-#: lib/exec_shell.c:45 login-utils/newgrp.c:186 login-utils/su-common.c:638
-#: login-utils/su-common.c:965 login-utils/sulogin.c:741
-#: login-utils/sulogin.c:745 schedutils/chrt.c:334 schedutils/ionice.c:232
-#: schedutils/taskset.c:237 sys-utils/flock.c:298 sys-utils/nsenter.c:339
-#: sys-utils/prlimit.c:636 sys-utils/rtcwake.c:587 sys-utils/setarch.c:292
-#: sys-utils/setarch.c:355 sys-utils/setsid.c:114 sys-utils/swapon.c:295
-#: sys-utils/switch_root.c:233 sys-utils/unshare.c:157 term-utils/script.c:459
-#: text-utils/pg.c:1363
-#, c-format
-msgid "failed to execute %s"
-msgstr "執行 %s 時失敗"
+#: include/pt-gpt-partnames.h:123
+#, fuzzy
+msgid "Linux /usr verity (MIPS-64 LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/alignment.c:108
-#, c-format
-msgid "Partition %i does not start on physical sector boundary.\n"
-msgstr "分割區 %i 並非開始於磁柱邊界。\n"
+#: include/pt-gpt-partnames.h:124
+#, fuzzy
+msgid "Linux /usr verity (HPPA/PARISC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/alignment.c:518
+#: include/pt-gpt-partnames.h:125
#, fuzzy
-msgid "Calling ioctl() to re-read partition table."
-msgstr "呼叫 ioctl() 以重新讀取分割表。\n"
+msgid "Linux /usr verity (PPC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/alignment.c:527
+#: include/pt-gpt-partnames.h:126
#, fuzzy
-msgid "Re-reading the partition table failed."
-msgstr "重新讀取分割表…\n"
+msgid "Linux /usr verity (PPC64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/alignment.c:529
+#: include/pt-gpt-partnames.h:127
#, fuzzy
-msgid ""
-"The kernel still uses the old table. The new table will be used at the next "
-"reboot or after you run partprobe(8) or kpartx(8)."
-msgstr ""
-"\n"
-"警告：Re-reading 分割表失敗的與錯誤 %d：%m。\n"
-"內核仍然使用舊的表格。新的表格將被使用於\n"
-"下一個重新開機或之後您運行 partprobe (8) 或 kpartx (8)\n"
+msgid "Linux /usr verity (PPC64LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/ask.c:334 libfdisk/src/ask.c:346
-#, fuzzy, c-format
-msgid "Selected partition %d"
-msgstr "已選分割區 %d\n"
+#: include/pt-gpt-partnames.h:128
+#, fuzzy
+msgid "Linux /usr verity (RISC-V-32)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/ask.c:337
+#: include/pt-gpt-partnames.h:129
#, fuzzy
-msgid "No partition is defined yet!"
-msgstr "尚無分割區被定義！\n"
+msgid "Linux /usr verity (RISC-V-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/ask.c:349
+#: include/pt-gpt-partnames.h:130
#, fuzzy
-msgid "No free partition available!"
-msgstr "沒有可用的磁區存在\n"
+msgid "Linux /usr verity (S390)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/ask.c:359
-msgid "Partition number"
-msgstr "分割區編號"
+#: include/pt-gpt-partnames.h:131
+#, fuzzy
+msgid "Linux /usr verity (S390X)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/ask.c:659
-#, fuzzy, c-format
-msgid "Created a new partition %d of type '%s' and of size %s."
-msgstr "分割 %d 的型態 %s 和的大小 %s 是設定\n"
+#: include/pt-gpt-partnames.h:132
+#, fuzzy
+msgid "Linux /usr verity (TILE-Gx)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:152
-#, fuzzy, c-format
-msgid "Partition %zd: has invalid starting sector 0."
-msgstr "分割區 %s 具有無效的開始磁區 0。\n"
+#: include/pt-gpt-partnames.h:133
+#, fuzzy
+msgid "Linux root verity sign. (x86)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:167
-#, fuzzy, c-format
-msgid "There is no *BSD partition on %s."
-msgstr "沒有任何 *BSD 分割位於 %s。\n"
+#: include/pt-gpt-partnames.h:134
+#, fuzzy
+msgid "Linux root verity sign. (x86-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:213 libfdisk/src/dos.c:874
+#: include/pt-gpt-partnames.h:135
#, fuzzy
-msgid "First cylinder"
-msgstr "磁柱"
+msgid "Linux root verity sign. (Alpha)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:240 libfdisk/src/dos.c:936
+#: include/pt-gpt-partnames.h:136
#, fuzzy
-msgid "Last cylinder, +cylinders or +size{K,M,G,T,P}"
-msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+msgid "Linux root verity sign. (ARC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:245 libfdisk/src/dos.c:941 libfdisk/src/gpt.c:1705
+#: include/pt-gpt-partnames.h:137
#, fuzzy
-msgid "Last sector, +sectors or +size{K,M,G,T,P}"
-msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+msgid "Linux root verity sign. (ARM)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:281
-#, fuzzy, c-format
-msgid "The device %s does not contain BSD disklabel."
-msgstr "%s 不含任何磁碟標籤。\n"
+#: include/pt-gpt-partnames.h:138
+#, fuzzy
+msgid "Linux root verity sign. (ARM-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:283
+#: include/pt-gpt-partnames.h:139
#, fuzzy
-msgid "Do you want to create a BSD disklabel?"
-msgstr "您要建立磁碟標籤嗎？(y/n) "
+msgid "Linux root verity sign. (IA-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:346
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "類型：%s\n"
+#: include/pt-gpt-partnames.h:140
+#, fuzzy
+msgid "Linux root verity sign. (LoongArch-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:348
-#, fuzzy, c-format
-msgid "type: %d"
-msgstr "類型：%d\n"
+#: include/pt-gpt-partnames.h:141
+#, fuzzy
+msgid "Linux root verity sign. (MIPS-32 LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:350
-#, fuzzy, c-format
-msgid "disk: %.*s"
-msgstr "磁碟：%.*s\n"
+#: include/pt-gpt-partnames.h:142
+#, fuzzy
+msgid "Linux root verity sign. (MIPS-64 LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:351
-#, fuzzy, c-format
-msgid "label: %.*s"
-msgstr "標籤：%.*s\n"
+#: include/pt-gpt-partnames.h:143
+#, fuzzy
+msgid "Linux root verity sign. (HPPA/PARISC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:353
-#, fuzzy, c-format
-msgid "flags: %s"
-msgstr "旗標："
+#: include/pt-gpt-partnames.h:144
+#, fuzzy
+msgid "Linux root verity sign. (PPC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:354
-msgid " removable"
-msgstr " 可移除的"
+#: include/pt-gpt-partnames.h:145
+#, fuzzy
+msgid "Linux root verity sign. (PPC64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:355
-msgid " ecc"
-msgstr " ecc"
+#: include/pt-gpt-partnames.h:146
+#, fuzzy
+msgid "Linux root verity sign. (PPC64LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:356
-msgid " badsect"
-msgstr " 不良磁區"
+#: include/pt-gpt-partnames.h:147
+#, fuzzy
+msgid "Linux root verity sign. (RISC-V-32)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:360
-#, fuzzy, c-format
-msgid "bytes/sector: %ld"
-msgstr "位元組/磁區：%ld\n"
+#: include/pt-gpt-partnames.h:148
+#, fuzzy
+msgid "Linux root verity sign. (RISC-V-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:361
-#, fuzzy, c-format
-msgid "sectors/track: %ld"
-msgstr "磁區/磁軌：%ld\n"
+#: include/pt-gpt-partnames.h:149
+#, fuzzy
+msgid "Linux root verity sign. (S390)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:362
-#, fuzzy, c-format
-msgid "tracks/cylinder: %ld"
-msgstr "磁軌/磁柱：%ld\n"
+#: include/pt-gpt-partnames.h:150
+#, fuzzy
+msgid "Linux root verity sign. (S390X)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:363
-#, fuzzy, c-format
-msgid "sectors/cylinder: %ld"
-msgstr "磁區/磁柱：%ld\n"
+#: include/pt-gpt-partnames.h:151
+#, fuzzy
+msgid "Linux root verity sign. (TILE-Gx)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:364
-#, fuzzy, c-format
-msgid "cylinders: %ld"
-msgstr "磁柱：%ld\n"
+#: include/pt-gpt-partnames.h:152
+#, fuzzy
+msgid "Linux /usr verity sign. (x86)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:365
-#, fuzzy, c-format
-msgid "rpm: %d"
-msgstr "rpm：%d\n"
+#: include/pt-gpt-partnames.h:153
+#, fuzzy
+msgid "Linux /usr verity sign. (x86-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:366
-#, fuzzy, c-format
-msgid "interleave: %d"
-msgstr "交錯：%d\n"
+#: include/pt-gpt-partnames.h:154
+#, fuzzy
+msgid "Linux /usr verity sign. (Alpha)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:367
-#, fuzzy, c-format
-msgid "trackskew: %d"
-msgstr "trackskew：%d\n"
+#: include/pt-gpt-partnames.h:155
+#, fuzzy
+msgid "Linux /usr verity sign. (ARC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:368
-#, fuzzy, c-format
-msgid "cylinderskew: %d"
-msgstr "cylinderskew：%d\n"
+#: include/pt-gpt-partnames.h:156
+#, fuzzy
+msgid "Linux /usr verity sign. (ARM)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:369
-#, fuzzy, c-format
-msgid "headswitch: %ld (milliseconds)"
-msgstr "headswitch：%ld\t\t# 毫秒\n"
+#: include/pt-gpt-partnames.h:157
+#, fuzzy
+msgid "Linux /usr verity sign. (ARM-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:370
-#, fuzzy, c-format
-msgid "track-to-track seek: %ld (milliseconds)"
-msgstr "軌對軌搜尋：%ld\t# 毫秒\n"
+#: include/pt-gpt-partnames.h:158
+#, fuzzy
+msgid "Linux /usr verity sign. (IA-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:383
-#, fuzzy, c-format
-msgid "partitions: %d"
-msgstr ""
-"\n"
-"%d 分割區：\n"
+#: include/pt-gpt-partnames.h:159
+#, fuzzy
+msgid "Linux /usr verity sign. (LoongArch-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:393 libfdisk/src/sgi.c:334
-msgid "#"
-msgstr ""
+#: include/pt-gpt-partnames.h:160
+#, fuzzy
+msgid "Linux /usr verity sign. (MIPS-32 LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:394 libfdisk/src/dos.c:1512 libfdisk/src/dos.c:1605
-#: libfdisk/src/gpt.c:1200 libfdisk/src/sgi.c:277 libfdisk/src/sun.c:702
+#: include/pt-gpt-partnames.h:161
#, fuzzy
-msgid "Start"
-msgstr "啟始"
+msgid "Linux /usr verity sign. (MIPS-64 LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:396 libfdisk/src/dos.c:1513 libfdisk/src/gpt.c:1202
-#: libfdisk/src/sgi.c:337
-msgid "Size"
-msgstr ""
+#: include/pt-gpt-partnames.h:162
+#, fuzzy
+msgid "Linux /usr verity sign. (HPPA/PARISC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:398
-msgid "fsize"
-msgstr ""
+#: include/pt-gpt-partnames.h:163
+#, fuzzy
+msgid "Linux /usr verity sign. (PPC)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:399
-msgid "bsize"
-msgstr ""
+#: include/pt-gpt-partnames.h:164
+#, fuzzy
+msgid "Linux /usr verity sign. (PPC64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:400
-msgid "cpg"
-msgstr ""
+#: include/pt-gpt-partnames.h:165
+#, fuzzy
+msgid "Linux /usr verity sign. (PPC64LE)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:491
-msgid "bytes/sector"
-msgstr "位元組/磁區"
+#: include/pt-gpt-partnames.h:166
+#, fuzzy
+msgid "Linux /usr verity sign. (RISC-V-32)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:494
-msgid "sectors/track"
-msgstr "磁區/磁軌"
+#: include/pt-gpt-partnames.h:167
+#, fuzzy
+msgid "Linux /usr verity sign. (RISC-V-64)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:495
-msgid "tracks/cylinder"
-msgstr "磁軌/磁柱"
+#: include/pt-gpt-partnames.h:168
+#, fuzzy
+msgid "Linux /usr verity sign. (S390)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:500
-msgid "sectors/cylinder"
-msgstr "磁區/磁柱"
+#: include/pt-gpt-partnames.h:169
+#, fuzzy
+msgid "Linux /usr verity sign. (S390X)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:503
-msgid "rpm"
-msgstr "rpm"
+#: include/pt-gpt-partnames.h:170
+#, fuzzy
+msgid "Linux /usr verity sign. (TILE-Gx)"
+msgstr "SunOS 保留區"
-#: libfdisk/src/bsd.c:504
-msgid "interleave"
-msgstr "交錯"
+#: include/pt-gpt-partnames.h:176 include/pt-mbr-partnames.h:99
+#, fuzzy
+msgid "Linux extended boot"
+msgstr "Linux 擴展"
-#: libfdisk/src/bsd.c:505
-msgid "trackskew"
-msgstr "trackskew"
+#: include/pt-gpt-partnames.h:179
+#, fuzzy
+msgid "Linux user's home"
+msgstr "Linux"
-#: libfdisk/src/bsd.c:506
-msgid "cylinderskew"
-msgstr "cylinderskew"
+#: include/pt-gpt-partnames.h:182
+#, fuzzy
+msgid "FreeBSD data"
+msgstr "FreeBSD"
-#: libfdisk/src/bsd.c:508
-msgid "headswitch"
-msgstr "headswitch"
+#: include/pt-gpt-partnames.h:183
+#, fuzzy
+msgid "FreeBSD boot"
+msgstr "FreeBSD"
-#: libfdisk/src/bsd.c:509
-msgid "track-to-track seek"
-msgstr "軌對軌搜尋"
+#: include/pt-gpt-partnames.h:184
+#, fuzzy
+msgid "FreeBSD swap"
+msgstr "BSDI 交換區"
-#: libfdisk/src/bsd.c:521
-#, fuzzy, c-format
-msgid "open failed %s"
-msgstr "開啟失敗：%s"
+#: include/pt-gpt-partnames.h:185
+#, fuzzy
+msgid "FreeBSD UFS"
+msgstr "FreeBSD"
-#: libfdisk/src/bsd.c:526
-#, fuzzy, c-format
-msgid "read failed %s"
-msgstr "讀取失敗：%s"
+#: include/pt-gpt-partnames.h:186
+#, fuzzy
+msgid "FreeBSD ZFS"
+msgstr "FreeBSD"
-#: libfdisk/src/bsd.c:532
-#, c-format
-msgid "The bootstrap file %s successfully loaded."
-msgstr ""
+#: include/pt-gpt-partnames.h:187
+#, fuzzy
+msgid "FreeBSD Vinum"
+msgstr "FreeBSD"
-#: libfdisk/src/bsd.c:548
-#, fuzzy, c-format
-msgid "Bootstrap: %1$sboot -> boot%1$s (default %1$s)"
-msgstr "啟動程式：%sboot -> boot%s (%s)："
+#: include/pt-gpt-partnames.h:190
+#, fuzzy
+msgid "Apple HFS/HFS+"
+msgstr "HFS / HFS+"
-#: libfdisk/src/bsd.c:579
+#: include/pt-gpt-partnames.h:191
#, fuzzy
-msgid "Bootstrap overlaps with disk label!"
-msgstr "啟動程式與磁碟標籤重疊！\n"
+msgid "Apple APFS"
+msgstr "HFS / HFS+"
-#: libfdisk/src/bsd.c:593
-#, fuzzy, c-format
-msgid "seek failed %s"
-msgstr "搜尋失敗"
+#: include/pt-gpt-partnames.h:192
+msgid "Apple UFS"
+msgstr ""
-#: libfdisk/src/bsd.c:598
-#, fuzzy, c-format
-msgid "write failed %s"
-msgstr "寫入失敗：%s"
+#: include/pt-gpt-partnames.h:193
+msgid "Apple RAID"
+msgstr ""
-#: libfdisk/src/bsd.c:604
-#, fuzzy, c-format
-msgid "Bootstrap installed on %s."
-msgstr "啟動程式已安裝於 %s。\n"
+#: include/pt-gpt-partnames.h:194
+msgid "Apple RAID offline"
+msgstr ""
-#: libfdisk/src/bsd.c:761
-#, fuzzy, c-format
-msgid "seek failed: %d"
-msgstr "搜尋失敗"
+#: include/pt-gpt-partnames.h:195
+msgid "Apple boot"
+msgstr ""
-#: libfdisk/src/bsd.c:765
-#, fuzzy, c-format
-msgid "write failed: %d"
-msgstr "寫入失敗：%s"
+#: include/pt-gpt-partnames.h:196
+msgid "Apple label"
+msgstr ""
-#: libfdisk/src/bsd.c:771
-#, fuzzy, c-format
-msgid "Disklabel written to %s."
-msgstr "硬碟: %s\n"
+#: include/pt-gpt-partnames.h:197
+msgid "Apple TV recovery"
+msgstr ""
-#: libfdisk/src/bsd.c:777 libfdisk/src/context.c:213
+#: include/pt-gpt-partnames.h:198
+msgid "Apple Core storage"
+msgstr ""
+
+#: include/pt-gpt-partnames.h:199
+msgid "Apple Silicon boot"
+msgstr ""
+
+#: include/pt-gpt-partnames.h:200
+msgid "Apple Silicon recovery"
+msgstr ""
+
+#: include/pt-gpt-partnames.h:203 include/pt-mbr-partnames.h:81
+msgid "Solaris boot"
+msgstr "Solaris 開機"
+
+#: include/pt-gpt-partnames.h:204
#, fuzzy
-msgid "Syncing disks."
-msgstr "同步磁碟。\n"
+msgid "Solaris root"
+msgstr "Solaris 開機"
-#: libfdisk/src/bsd.c:811
-msgid "BSD label is not nested within a DOS partition"
+#: include/pt-gpt-partnames.h:206
+msgid "Solaris /usr & Apple ZFS"
msgstr ""
-#: libfdisk/src/bsd.c:840
-#, fuzzy, c-format
-msgid "BSD partition '%c' linked to DOS partition %d."
-msgstr "鏈結 BSD 分割到 non-BSD 分割"
+#: include/pt-gpt-partnames.h:207
+#, fuzzy
+msgid "Solaris swap"
+msgstr "Solaris"
-#: libfdisk/src/context.c:209
-#, fuzzy, c-format
-msgid "%s: close device failed"
-msgstr "%s：lseek 失敗"
+#: include/pt-gpt-partnames.h:208
+#, fuzzy
+msgid "Solaris backup"
+msgstr "Solaris 開機"
-#: libfdisk/src/context.c:343
+#: include/pt-gpt-partnames.h:209
#, fuzzy
-msgid "cylinder"
-msgid_plural "cylinders"
-msgstr[0] "磁柱"
+msgid "Solaris /var"
+msgstr "Solaris"
-#: libfdisk/src/context.c:344
+#: include/pt-gpt-partnames.h:210
#, fuzzy
-msgid "sector"
-msgid_plural "sectors"
-msgstr[0] "磁區"
+msgid "Solaris /home"
+msgstr "Solaris 開機"
-#: libfdisk/src/dos.c:170
+#: include/pt-gpt-partnames.h:211
#, fuzzy
-msgid "All primary partitions have been defined already."
-msgstr "所有主要分割區已被定義！\n"
+msgid "Solaris alternate sector"
+msgstr "太多交替速度"
-#: libfdisk/src/dos.c:215
-#, fuzzy, c-format
-msgid "Failed to read extended partition table (offset=%jd)"
-msgstr "%s：無法讀取分割表"
+#: include/pt-gpt-partnames.h:212
+#, fuzzy
+msgid "Solaris reserved 1"
+msgstr "SunOS 保留區"
-#: libfdisk/src/dos.c:275
+#: include/pt-gpt-partnames.h:213
#, fuzzy
-msgid "You can set geometry from the extra functions menu."
-msgstr ""
-"%s%s.\n"
-"您可以從額外函式選單來做這個。\n"
+msgid "Solaris reserved 2"
+msgstr "SunOS 保留區"
-#: libfdisk/src/dos.c:278
-msgid "DOS-compatible mode is deprecated."
-msgstr ""
+#: include/pt-gpt-partnames.h:214
+#, fuzzy
+msgid "Solaris reserved 3"
+msgstr "SunOS 保留區"
-#: libfdisk/src/dos.c:282
+#: include/pt-gpt-partnames.h:215
#, fuzzy
-msgid ""
-"The device presents a logical sector size that is smaller than the physical "
-"sector size. Aligning to a physical sector (or optimal I/O) size boundary is "
-"recommended, or performance may be impacted."
-msgstr ""
-"\n"
-"裝置呈現的邏輯區大小小於\n"
-"實體磁區大小。建議對齊到實體磁區 (或最佳化\n"
-"I/O) 大小邊界，否則效能也許會被影響。\n"
+msgid "Solaris reserved 4"
+msgstr "SunOS 保留區"
-#: libfdisk/src/dos.c:288
-msgid "Cylinders as display units are deprecated."
+#: include/pt-gpt-partnames.h:216
+#, fuzzy
+msgid "Solaris reserved 5"
+msgstr "SunOS 保留區"
+
+#: include/pt-gpt-partnames.h:224
+#, fuzzy
+msgid "NetBSD swap"
+msgstr "BSDI 交換區"
+
+#: include/pt-gpt-partnames.h:225
+#, fuzzy
+msgid "NetBSD FFS"
+msgstr "NetBSD"
+
+#: include/pt-gpt-partnames.h:226
+#, fuzzy
+msgid "NetBSD LFS"
+msgstr "NetBSD"
+
+#: include/pt-gpt-partnames.h:227
+msgid "NetBSD concatenated"
msgstr ""
-#: libfdisk/src/dos.c:295
-#, fuzzy, c-format
-msgid ""
-"The size of this disk is %s (%llu bytes). DOS partition table format can not "
-"be used on drives for volumes larger than (%llu bytes) for %ld-byte sectors. "
-"Use GUID partition table format (GPT)."
+#: include/pt-gpt-partnames.h:228
+msgid "NetBSD encrypted"
msgstr ""
-"\n"
-"警告：大小的這個磁碟是 %d.%d TB (%llu 位元組)。\n"
-"DOS 分割表格式無法使用的於磁碟用於音量\n"
-"大於 (%llu 位元組) 用於 %ld-byte 磁區。使用退出了 (1) 和 GUID\n"
-"分割表格式 (GPT)。\n"
-"\n"
-#: libfdisk/src/dos.c:421
+#: include/pt-gpt-partnames.h:229
#, fuzzy
-msgid "Bad offset in primary extended partition."
-msgstr "在主要擴充分割區中的不當偏移值\n"
+msgid "NetBSD RAID"
+msgstr "NetBSD"
-#: libfdisk/src/dos.c:437
-#, fuzzy, c-format
-msgid ""
-"Omitting partitions after #%zd. They will be deleted if you save this "
-"partition table."
+#: include/pt-gpt-partnames.h:232
+msgid "ChromeOS kernel"
msgstr ""
-"警告：忽略 #%d 之後的分割區。\n"
-"如果您儲存這個分割表就會刪除它們。\n"
-#: libfdisk/src/dos.c:459
-#, fuzzy, c-format
-msgid "Extra link pointer in partition table %zd."
-msgstr "警告：在分割表中有額外的鏈結指標 %d\n"
+#: include/pt-gpt-partnames.h:233
+msgid "ChromeOS root fs"
+msgstr ""
-#: libfdisk/src/dos.c:467
-#, fuzzy, c-format
-msgid "Ignoring extra data in partition table %zd."
-msgstr "警告：忽略分割表 %d 中的額外資料\n"
+#: include/pt-gpt-partnames.h:234
+#, fuzzy
+msgid "ChromeOS reserved"
+msgstr "SunOS 保留區"
-#: libfdisk/src/dos.c:501
-#, fuzzy, c-format
-msgid "omitting empty partition (%zd)"
-msgstr "忽略空的分割 (%d)\n"
+#: include/pt-gpt-partnames.h:237
+msgid "MidnightBSD data"
+msgstr ""
-#: libfdisk/src/dos.c:569
-#, fuzzy
-msgid "Enter of the new disk identifier"
-msgstr "變更磁碟識別碼"
+#: include/pt-gpt-partnames.h:238
+msgid "MidnightBSD boot"
+msgstr ""
-#: libfdisk/src/dos.c:576
+#: include/pt-gpt-partnames.h:239
#, fuzzy
-msgid "Incorrect value."
-msgstr "無效的設定值"
+msgid "MidnightBSD swap"
+msgstr "BSDI 交換區"
-#: libfdisk/src/dos.c:586
-#, fuzzy, c-format
-msgid "Disk identifier changed from 0x%08x to 0x%08x."
-msgstr "磁碟識別碼：0x%08x\n"
+#: include/pt-gpt-partnames.h:240
+msgid "MidnightBSD UFS"
+msgstr ""
-#: libfdisk/src/dos.c:678
-#, fuzzy, c-format
-msgid "Ignoring extra extended partition %zd"
-msgstr "忽略額外的擴充分割區 %d\n"
+#: include/pt-gpt-partnames.h:241
+msgid "MidnightBSD ZFS"
+msgstr ""
-#: libfdisk/src/dos.c:690
-#, fuzzy, c-format
-msgid ""
-"Invalid flag 0x%02x%02x of partition table %zd will be corrected by w(rite)"
-msgstr "警告：分割表 %2$d 的無效旗標 0x%1$04x 將由 w(rite) 所修正\n"
+#: include/pt-gpt-partnames.h:242
+msgid "MidnightBSD Vinum"
+msgstr ""
-#: libfdisk/src/dos.c:811
-#, fuzzy, c-format
-msgid "Partition %d is already defined. Delete it before re-adding it."
-msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+#: include/pt-gpt-partnames.h:245
+msgid "Ceph Journal"
+msgstr ""
-#: libfdisk/src/dos.c:863
-#, fuzzy, c-format
-msgid "Sector %llu is already allocated."
-msgstr "磁區 %llu 已經配置\n"
+#: include/pt-gpt-partnames.h:246
+msgid "Ceph Encrypted Journal"
+msgstr ""
-#: libfdisk/src/dos.c:920 libfdisk/src/gpt.c:1660
-#, fuzzy
-msgid "No free sectors available."
-msgstr "沒有可用的磁區存在\n"
+#: include/pt-gpt-partnames.h:247
+msgid "Ceph OSD"
+msgstr ""
-#: libfdisk/src/dos.c:1029
-#, fuzzy, c-format
-msgid "Adding logical partition %zd"
-msgstr "加入邏輯分割區 %d\n"
+#: include/pt-gpt-partnames.h:248
+msgid "Ceph crypt OSD"
+msgstr ""
-#: libfdisk/src/dos.c:1045
-#, fuzzy, c-format
-msgid "Partition %zd: contains sector 0"
-msgstr "警告：分割區 %d 含有磁區 0\n"
+#: include/pt-gpt-partnames.h:249
+msgid "Ceph disk in creation"
+msgstr ""
-#: libfdisk/src/dos.c:1047
-#, fuzzy, c-format
-msgid "Partition %zd: head %d greater than maximum %d"
-msgstr "分割區 %d: 磁頭 %d 大於最大值 %d\n"
+#: include/pt-gpt-partnames.h:250
+msgid "Ceph crypt disk in creation"
+msgstr ""
-#: libfdisk/src/dos.c:1050
-#, fuzzy, c-format
-msgid "Partition %zd: sector %d greater than maximum %llu"
-msgstr "分割區 %d: 磁區 %d 大於最大值 %llu\n"
+#: include/pt-gpt-partnames.h:253 include/pt-mbr-partnames.h:109
+msgid "VMware VMFS"
+msgstr "VMware VMFS"
-#: libfdisk/src/dos.c:1053
-#, fuzzy, c-format
-msgid "Partition %zd: cylinder %d greater than maximum %llu"
-msgstr "分割區 %d：磁柱 %d 大於最大值 %llu\n"
-
-#: libfdisk/src/dos.c:1059
-#, fuzzy, c-format
-msgid "Partition %zd: previous sectors %d disagrees with total %d"
-msgstr "分割區 %d: 之前磁區 %d 與總計不一致 %d\n"
-
-#: libfdisk/src/dos.c:1112
-#, fuzzy, c-format
-msgid ""
-"Partition %zd: different physical/logical beginnings (non-Linux?): phys=(%d, "
-"%d, %d), logical=(%d, %d, %d)"
-msgstr "分割區 %d 有不同的實體/邏輯開始位置 (非 Linux？)：\n"
-
-#: libfdisk/src/dos.c:1123
-#, fuzzy, c-format
-msgid ""
-"Partition %zd: different physical/logical endings: phys=(%d, %d, %d), "
-"logical=(%d, %d, %d)"
-msgstr "分割區 %d 有不同的實體/邏輯結束位置：\n"
-
-#: libfdisk/src/dos.c:1132
-#, fuzzy, c-format
-msgid "Partition %zd: does not end on cylinder boundary."
-msgstr "分割區 %d 並非終於磁柱邊界。\n"
-
-#: libfdisk/src/dos.c:1159
-#, fuzzy, c-format
-msgid "Partition %zd: bad start-of-data."
-msgstr "分割區 %d 沒有資料區域\n"
-
-#: libfdisk/src/dos.c:1169
-#, fuzzy, c-format
-msgid "Partition %zd: overlaps partition %zd."
-msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
-
-#: libfdisk/src/dos.c:1195
-#, fuzzy, c-format
-msgid "Partition %zd: empty."
-msgstr "警告：分割區 %d 是空的\n"
-
-#: libfdisk/src/dos.c:1200
-#, fuzzy, c-format
-msgid "Logical partition %zd: not entirely in partition %zd."
-msgstr "邏輯分割區 %d 並非完整處於分割區 %d 中\n"
-
-#: libfdisk/src/dos.c:1208
-#, fuzzy, c-format
-msgid "Total allocated sectors %llu greater than the maximum %llu."
-msgstr "配置的磁區總計 %llu 大於最大值 %llu\n"
-
-#: libfdisk/src/dos.c:1211
-#, fuzzy, c-format
-msgid "Remaining %lld unallocated %ld-byte sectors."
-msgstr "其餘 %lld unallocated %ld-byte 磁區\n"
-
-#: libfdisk/src/dos.c:1242
+#: include/pt-gpt-partnames.h:254
#, fuzzy
-msgid "The maximum number of partitions has been created."
-msgstr "已建立分割區的最大數量\n"
+msgid "VMware Diagnostic"
+msgstr "Compaq 診斷"
-#: libfdisk/src/dos.c:1250
+#: include/pt-gpt-partnames.h:255
#, fuzzy
-msgid "All primary partitions are in use."
-msgstr "所有主要分割區是在中使用\n"
+msgid "VMware Virtual SAN"
+msgstr "VMware VMFS"
-#: libfdisk/src/dos.c:1253
+#: include/pt-gpt-partnames.h:256
#, fuzzy
-msgid ""
-"If you want to create more than four partitions, you must replace aprimary "
-"partition with an extended partition first."
-msgstr ""
-"如果您要建立超過四分割區，您必須置換\n"
-"主要分割與進階分割先。\n"
+msgid "VMware Virsto"
+msgstr "VMware VMFS"
-#: libfdisk/src/dos.c:1261
+#: include/pt-gpt-partnames.h:257
#, fuzzy
-msgid "All logical partitions are in use. Adding a primary partition."
-msgstr "所有邏輯分割區都在使用中\n"
-
-#: libfdisk/src/dos.c:1274
-#, fuzzy, c-format
-msgid ""
-"Partition type:\n"
-" p primary (%zd primary, %d extended, %zd free)\n"
-"%s\n"
-"Select (default %c)"
-msgstr ""
-"分割區類型：\n"
-" p 主要 (%d 主要，%d 進階，%d 自由)\n"
-"%s\n"
-"選取 (預設 %c)："
+msgid "VMware Reserved"
+msgstr "SunOS 保留區"
-#: libfdisk/src/dos.c:1280
+#: include/pt-gpt-partnames.h:260
#, fuzzy
-msgid " l logical (numbered from 5)"
-msgstr " l 邏輯的 (已編號從 5)"
+msgid "OpenBSD data"
+msgstr "FreeBSD"
-#: libfdisk/src/dos.c:1280
+#: include/pt-gpt-partnames.h:263
#, fuzzy
-msgid " e extended"
-msgstr " e 進階"
-
-#: libfdisk/src/dos.c:1288
-#, fuzzy, c-format
-msgid "Using default response %c."
-msgstr "使用預設回應 %c\n"
-
-#: libfdisk/src/dos.c:1310
-#, fuzzy, c-format
-msgid "Invalid partition type `%c'."
-msgstr "無效的分割區類型『%c』\n"
-
-#: libfdisk/src/dos.c:1325
-#, c-format
-msgid "Write sector %jd failed: seek failed"
-msgstr ""
+msgid "QNX6 file system"
+msgstr "檔案系統型態"
-#: libfdisk/src/dos.c:1417
+#: include/pt-gpt-partnames.h:266
#, fuzzy
-msgid ""
-"You cannot change a partition into an extended one or vice versa. Delete it "
-"first."
-msgstr ""
-"您無法變更分割區為一個擴充分割或反之\n"
-"請先刪除它。\n"
+msgid "Plan 9 partition"
+msgstr "刪除分割"
-#: libfdisk/src/dos.c:1423
-#, fuzzy
-msgid ""
-"If you have created or modified any DOS 6.x partitions, please see the fdisk "
-"documantation for additional information."
+#: include/pt-gpt-partnames.h:269
+msgid "HiFive FSBL"
msgstr ""
-"\n"
-"警告：如果您已建立或修改任何\n"
-"DOS 6.x 分割區，請參看 cfdisk 手冊\n"
-"以獲得額外的資訊。\n"
-#: libfdisk/src/dos.c:1501
-#, fuzzy
-msgid "Nr"
-msgstr "N"
-
-#: libfdisk/src/dos.c:1502
-msgid "AF"
+#: include/pt-gpt-partnames.h:270
+msgid "HiFive BBL"
msgstr ""
-#: libfdisk/src/dos.c:1504 libfdisk/src/dos.c:1508
-msgid "Hd"
+#: include/pt-gpt-partnames.h:273
+msgid "Haiku BFS"
msgstr ""
-#: libfdisk/src/dos.c:1505 libfdisk/src/dos.c:1509
-#, fuzzy
-msgid "Sec"
-msgstr "設定"
-
-#: libfdisk/src/dos.c:1506 libfdisk/src/dos.c:1510
-msgid "Cyl"
+#: include/pt-gpt-partnames.h:276
+msgid "Marvell Armada 3700 Boot partition"
msgstr ""
-#: libfdisk/src/dos.c:1514 libfdisk/src/dos.c:1609 libfdisk/src/sgi.c:280
-#: libfdisk/src/sun.c:706
-msgid "Id"
-msgstr ""
+#: include/pt-mbr-partnames.h:5
+msgid "Empty"
+msgstr "空"
-#: libfdisk/src/dos.c:1588
-#, fuzzy
-msgid ""
-"This doesn't look like a partition table Probably you selected the wrong "
-"device."
-msgstr ""
-"這看起來不像是一個分割表\n"
-"您大概選了錯誤的裝置。\n"
-"\n"
+#: include/pt-mbr-partnames.h:6
+msgid "FAT12"
+msgstr "FAT12"
-#: libfdisk/src/dos.c:1603 libfdisk/src/gpt.c:1199 libfdisk/src/sgi.c:275
-#: libfdisk/src/sun.c:700
-msgid "Device"
-msgstr "所用裝置"
+#: include/pt-mbr-partnames.h:7
+msgid "XENIX root"
+msgstr "XENIX root"
-#. TRANSLATORS: keep one blank space behind 'Blocks'
-#: libfdisk/src/dos.c:1608 libfdisk/src/sun.c:705
-#, fuzzy
-msgid "Blocks "
-msgstr "區塊"
+#: include/pt-mbr-partnames.h:8
+msgid "XENIX usr"
+msgstr "XENIX usr"
-#: libfdisk/src/dos.c:1610 libfdisk/src/sgi.c:281 libfdisk/src/sun.c:707
-msgid "System"
-msgstr ""
+#: include/pt-mbr-partnames.h:9
+msgid "FAT16 <32M"
+msgstr "FAT16 <32M"
-#: libfdisk/src/dos.c:1677
-#, fuzzy
-msgid "Partition table entries are not in disk order."
-msgstr ""
-"\n"
-"分割表項目未按磁碟排序\n"
+#: include/pt-mbr-partnames.h:10
+msgid "Extended"
+msgstr "延伸"
-#: libfdisk/src/dos.c:1754
-#, fuzzy
-msgid "Nothing to do. Ordering is correct already."
-msgstr ""
-"無事可做。順序已經是正確的。\n"
-"\n"
+#: include/pt-mbr-partnames.h:11
+msgid "FAT16"
+msgstr "FAT16"
-#: libfdisk/src/dos.c:1783
+#: include/pt-mbr-partnames.h:12
#, fuzzy
-msgid "Done."
-msgstr "完成。\n"
+msgid "HPFS/NTFS/exFAT"
+msgstr "HPFS/NTFS/exFAT"
-#: libfdisk/src/dos.c:1803
-#, fuzzy, c-format
-msgid "Partition %d: no data area."
-msgstr "分割區 %d 沒有資料區域\n"
+#: include/pt-mbr-partnames.h:13
+msgid "AIX"
+msgstr "AIX"
-#: libfdisk/src/dos.c:1833
-msgid "New beginning of data"
-msgstr "新的資料開始部分"
+#: include/pt-mbr-partnames.h:14
+msgid "AIX bootable"
+msgstr "AIX 可開機"
-#: libfdisk/src/dos.c:1895
-#, fuzzy, c-format
-msgid "Partition %d: is an extended partition."
-msgstr "警告：分割區 %d 是擴充分割區\n"
+#: include/pt-mbr-partnames.h:15
+msgid "OS/2 Boot Manager"
+msgstr "OS/2 開機管理員"
-#: libfdisk/src/gpt.c:142
-msgid "EFI System"
-msgstr ""
+#: include/pt-mbr-partnames.h:16
+msgid "W95 FAT32"
+msgstr "W95 FAT32"
-#: libfdisk/src/gpt.c:144
-#, fuzzy
-msgid "MBR partition scheme"
-msgstr "分割名稱"
+#: include/pt-mbr-partnames.h:17
+msgid "W95 FAT32 (LBA)"
+msgstr "W95 FAT32 (LBA)"
-#: libfdisk/src/gpt.c:146
-#, fuzzy
-msgid "BIOS boot partition"
-msgstr "選取可開機的分割"
+#: include/pt-mbr-partnames.h:18
+msgid "W95 FAT16 (LBA)"
+msgstr "W95 FAT16 (LBA)"
-#: libfdisk/src/gpt.c:149
-msgid "Microsoft reserved"
-msgstr ""
+#: include/pt-mbr-partnames.h:19
+msgid "W95 Ext'd (LBA)"
+msgstr "W95 Ext'd (LBA)"
-#: libfdisk/src/gpt.c:150
-msgid "Microsoft basic data"
-msgstr ""
+#: include/pt-mbr-partnames.h:20
+msgid "OPUS"
+msgstr "OPUS"
-#: libfdisk/src/gpt.c:151
-msgid "Microsoft LDM metadata"
-msgstr ""
+#: include/pt-mbr-partnames.h:21
+msgid "Hidden FAT12"
+msgstr "隱藏 FAT12"
-#: libfdisk/src/gpt.c:152
-msgid "Microsoft LDM data"
-msgstr ""
+#: include/pt-mbr-partnames.h:22
+msgid "Compaq diagnostics"
+msgstr "Compaq 診斷"
-#: libfdisk/src/gpt.c:153
-msgid "Windows recovery evironment"
-msgstr ""
+#: include/pt-mbr-partnames.h:23
+msgid "Hidden FAT16 <32M"
+msgstr "隱藏 FAT16 <32M"
-#: libfdisk/src/gpt.c:154
-msgid "IBM General Parallel Fs"
-msgstr ""
+#: include/pt-mbr-partnames.h:24
+msgid "Hidden FAT16"
+msgstr "隱藏 FAT16"
-#: libfdisk/src/gpt.c:157
-#, fuzzy
-msgid "HP-UX data partition"
-msgstr "刪除分割"
+#: include/pt-mbr-partnames.h:25
+msgid "Hidden HPFS/NTFS"
+msgstr "隱藏 HPFS/NTFS"
-#: libfdisk/src/gpt.c:158
-#, fuzzy
-msgid "HP-UX service partition"
-msgstr "已無多餘的分割區"
+#: include/pt-mbr-partnames.h:26
+msgid "AST SmartSleep"
+msgstr "AST 智慧休眠"
-#: libfdisk/src/gpt.c:161
-#, fuzzy
-msgid "Linux filesystem"
-msgstr "檔案系統型態"
+#: include/pt-mbr-partnames.h:27
+msgid "Hidden W95 FAT32"
+msgstr "隱藏 W95 FAT32"
-#: libfdisk/src/gpt.c:162 libfdisk/src/sgi.c:56
-msgid "Linux RAID"
-msgstr "Linux RAID"
+#: include/pt-mbr-partnames.h:28
+msgid "Hidden W95 FAT32 (LBA)"
+msgstr "隱藏 W95 FAT32 (LBA)"
-#: libfdisk/src/gpt.c:163 libfdisk/src/sgi.c:53 libfdisk/src/sun.c:44
-msgid "Linux swap"
-msgstr "Linux swap"
+#: include/pt-mbr-partnames.h:29
+msgid "Hidden W95 FAT16 (LBA)"
+msgstr "隱藏 W95 FAT16 (LBA)"
-#: libfdisk/src/gpt.c:165
-#, fuzzy
-msgid "Linux reserved"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:30
+msgid "NEC DOS"
+msgstr "NEC DOS"
-#: libfdisk/src/gpt.c:168
+#: include/pt-mbr-partnames.h:31
#, fuzzy
-msgid "FreeBSD data"
-msgstr "FreeBSD"
+msgid "Hidden NTFS WinRE"
+msgstr "隱藏 NTFS WinRE"
-#: libfdisk/src/gpt.c:169
-#, fuzzy
-msgid "FreeBSD boot"
-msgstr "FreeBSD"
+#: include/pt-mbr-partnames.h:32
+msgid "Plan 9"
+msgstr "Plan 9"
-#: libfdisk/src/gpt.c:170
-#, fuzzy
-msgid "FreeBSD swap"
-msgstr "BSDI 交換區"
+#: include/pt-mbr-partnames.h:33
+msgid "PartitionMagic recovery"
+msgstr "PartitionMagic 復原"
-#: libfdisk/src/gpt.c:171
-#, fuzzy
-msgid "FreeBSD UFS"
-msgstr "FreeBSD"
+#: include/pt-mbr-partnames.h:34
+msgid "Venix 80286"
+msgstr "Venix 80286"
-#: libfdisk/src/gpt.c:172
-#, fuzzy
-msgid "FreeBSD ZFS"
-msgstr "FreeBSD"
+#: include/pt-mbr-partnames.h:35
+msgid "PPC PReP Boot"
+msgstr "PPC PReP 開機"
-#: libfdisk/src/gpt.c:173
-#, fuzzy
-msgid "FreeBSD Vinum"
-msgstr "FreeBSD"
+#: include/pt-mbr-partnames.h:36
+msgid "SFS"
+msgstr "SFS"
-#: libfdisk/src/gpt.c:176
-#, fuzzy
-msgid "Apple HFS/HFS+"
-msgstr "HFS / HFS+"
+#: include/pt-mbr-partnames.h:37
+msgid "QNX4.x"
+msgstr "QNX4.x"
-#: libfdisk/src/gpt.c:177
-msgid "Apple UFS"
-msgstr ""
-
-#: libfdisk/src/gpt.c:178
-msgid "Apple RAID"
-msgstr ""
-
-#: libfdisk/src/gpt.c:179
-msgid "Apple RAID offline"
-msgstr ""
-
-#: libfdisk/src/gpt.c:180
-msgid "Apple boot"
-msgstr ""
+#: include/pt-mbr-partnames.h:38
+msgid "QNX4.x 2nd part"
+msgstr "QNX4.x 第二部分"
-#: libfdisk/src/gpt.c:181
-msgid "Apple label"
-msgstr ""
+#: include/pt-mbr-partnames.h:39
+msgid "QNX4.x 3rd part"
+msgstr "QNX4.x 第三部分"
-#: libfdisk/src/gpt.c:182
-msgid "Apple TV recovery"
-msgstr ""
+#: include/pt-mbr-partnames.h:40
+msgid "OnTrack DM"
+msgstr "OnTrack DM"
-#: libfdisk/src/gpt.c:183
-msgid "Apple Core storage"
-msgstr ""
+#: include/pt-mbr-partnames.h:41
+msgid "OnTrack DM6 Aux1"
+msgstr "OnTrack DM6 Aux1"
-#: libfdisk/src/gpt.c:187
-#, fuzzy
-msgid "Solaris root"
-msgstr "Solaris 開機"
+#: include/pt-mbr-partnames.h:42
+msgid "CP/M"
+msgstr "CP/M"
-#: libfdisk/src/gpt.c:189
-msgid "Solaris /usr & Apple ZFS"
-msgstr ""
+#: include/pt-mbr-partnames.h:43
+msgid "OnTrack DM6 Aux3"
+msgstr "OnTrack DM6 Aux3"
-#: libfdisk/src/gpt.c:190
-#, fuzzy
-msgid "Solaris swap"
-msgstr "Solaris"
+#: include/pt-mbr-partnames.h:44
+msgid "OnTrackDM6"
+msgstr "OnTrackDM6"
-#: libfdisk/src/gpt.c:191
-#, fuzzy
-msgid "Solaris backup"
-msgstr "Solaris 開機"
+#: include/pt-mbr-partnames.h:45
+msgid "EZ-Drive"
+msgstr "EZ-Drive"
-#: libfdisk/src/gpt.c:192
-#, fuzzy
-msgid "Solaris /var"
-msgstr "Solaris"
+#: include/pt-mbr-partnames.h:46
+msgid "Golden Bow"
+msgstr "Golden Bow"
-#: libfdisk/src/gpt.c:193
-#, fuzzy
-msgid "Solaris /home"
-msgstr "Solaris 開機"
+#: include/pt-mbr-partnames.h:47
+msgid "Priam Edisk"
+msgstr "Priam Edisk"
-#: libfdisk/src/gpt.c:194
-#, fuzzy
-msgid "Solaris alternate sector"
-msgstr "太多交替速度"
+#: include/pt-mbr-partnames.h:48 include/pt-mbr-partnames.h:95
+#: include/pt-mbr-partnames.h:105 include/pt-mbr-partnames.h:106
+msgid "SpeedStor"
+msgstr "SpeedStor"
-#: libfdisk/src/gpt.c:195
-#, fuzzy
-msgid "Solaris reserved 1"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:49
+msgid "GNU HURD or SysV"
+msgstr "GNU HURD 或 SysV"
-#: libfdisk/src/gpt.c:196
-#, fuzzy
-msgid "Solaris reserved 2"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:50
+msgid "Novell Netware 286"
+msgstr "Novell Netware 286"
-#: libfdisk/src/gpt.c:197
-#, fuzzy
-msgid "Solaris reserved 3"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:51
+msgid "Novell Netware 386"
+msgstr "Novell Netware 386"
-#: libfdisk/src/gpt.c:198
-#, fuzzy
-msgid "Solaris reserved 4"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:52
+msgid "DiskSecure Multi-Boot"
+msgstr "DiskSecure 多種開機"
-#: libfdisk/src/gpt.c:199
-#, fuzzy
-msgid "Solaris reserved 5"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:53
+msgid "PC/IX"
+msgstr "PC/IX"
-#: libfdisk/src/gpt.c:202
-#, fuzzy
-msgid "NetBSD swap"
-msgstr "BSDI 交換區"
+#: include/pt-mbr-partnames.h:54
+msgid "Old Minix"
+msgstr "舊版 Minix"
-#: libfdisk/src/gpt.c:203
-#, fuzzy
-msgid "NetBSD FFS"
-msgstr "NetBSD"
+#: include/pt-mbr-partnames.h:55
+msgid "Minix / old Linux"
+msgstr "Minix / 舊版 Linux"
-#: libfdisk/src/gpt.c:204
-#, fuzzy
-msgid "NetBSD LFS"
-msgstr "NetBSD"
+#: include/pt-mbr-partnames.h:56
+msgid "Linux swap / Solaris"
+msgstr "Linux 交換區/ Solaris"
-#: libfdisk/src/gpt.c:205
-msgid "NetBSD concatenated"
-msgstr ""
+#: include/pt-mbr-partnames.h:57
+msgid "Linux"
+msgstr "Linux"
-#: libfdisk/src/gpt.c:206
-msgid "NetBSD encrypted"
+#: include/pt-mbr-partnames.h:58
+msgid "OS/2 hidden or Intel hibernation"
msgstr ""
-#: libfdisk/src/gpt.c:207
-#, fuzzy
-msgid "NetBSD RAID"
-msgstr "NetBSD"
+#: include/pt-mbr-partnames.h:61
+msgid "Linux extended"
+msgstr "Linux 擴展"
-#: libfdisk/src/gpt.c:210
-msgid "ChromeOS kernel"
-msgstr ""
+#: include/pt-mbr-partnames.h:62 include/pt-mbr-partnames.h:63
+msgid "NTFS volume set"
+msgstr "NTFS 卷冊集"
-#: libfdisk/src/gpt.c:211
-msgid "ChromeOS root fs"
-msgstr ""
+#: include/pt-mbr-partnames.h:64
+msgid "Linux plaintext"
+msgstr "Linux 純文字"
-#: libfdisk/src/gpt.c:212
-#, fuzzy
-msgid "ChromeOS reserved"
-msgstr "SunOS 保留區"
+#: include/pt-mbr-partnames.h:66
+msgid "Amoeba"
+msgstr "Amoeba"
-#: libfdisk/src/gpt.c:215
-msgid "MidnightBSD data"
-msgstr ""
+#: include/pt-mbr-partnames.h:67
+msgid "Amoeba BBT"
+msgstr "Amoeba BBT"
-#: libfdisk/src/gpt.c:216
-msgid "MidnightBSD boot"
-msgstr ""
+#: include/pt-mbr-partnames.h:68
+msgid "BSD/OS"
+msgstr "BSD/OS"
-#: libfdisk/src/gpt.c:217
-#, fuzzy
-msgid "MidnightBSD swap"
-msgstr "BSDI 交換區"
+#: include/pt-mbr-partnames.h:69
+msgid "IBM Thinkpad hibernation"
+msgstr "IBM Thinkpad hibernation"
-#: libfdisk/src/gpt.c:218
-msgid "MidnightBSD UFS"
-msgstr ""
+#: include/pt-mbr-partnames.h:70
+msgid "FreeBSD"
+msgstr "FreeBSD"
-#: libfdisk/src/gpt.c:219
-msgid "MidnightBSD ZFS"
-msgstr ""
+#: include/pt-mbr-partnames.h:71
+msgid "OpenBSD"
+msgstr "OpenBSD"
-#: libfdisk/src/gpt.c:220
-msgid "MidnightBSD Vinum"
-msgstr ""
+#: include/pt-mbr-partnames.h:72
+msgid "NeXTSTEP"
+msgstr "NeXTSTEP"
-#: libfdisk/src/gpt.c:528
-#, fuzzy
-msgid "gpt: stat() failed"
-msgstr "%s：stat 失敗"
+#: include/pt-mbr-partnames.h:73
+msgid "Darwin UFS"
+msgstr "Darwin UFS"
-#: libfdisk/src/gpt.c:538
-#, c-format
-msgid "gpt: cannot handle files with mode %o"
-msgstr ""
+#: include/pt-mbr-partnames.h:74
+msgid "NetBSD"
+msgstr "NetBSD"
-#: libfdisk/src/gpt.c:795
-msgid "GPT Header"
-msgstr ""
+#: include/pt-mbr-partnames.h:75
+msgid "Darwin boot"
+msgstr "Darwin 開機"
-#: libfdisk/src/gpt.c:800
-msgid "GPT Entries"
-msgstr ""
+#: include/pt-mbr-partnames.h:76
+msgid "HFS / HFS+"
+msgstr "HFS / HFS+"
-#: libfdisk/src/gpt.c:1193
-#, fuzzy, c-format
-msgid "First LBA: %ju"
-msgstr "起初 %s"
+#: include/pt-mbr-partnames.h:77
+msgid "BSDI fs"
+msgstr "BSDI fs"
-#: libfdisk/src/gpt.c:1194
-#, c-format
-msgid "Last LBA: %ju"
-msgstr ""
+#: include/pt-mbr-partnames.h:78
+msgid "BSDI swap"
+msgstr "BSDI 交換區"
-#: libfdisk/src/gpt.c:1195
-#, c-format
-msgid "Alternative LBA: %ju"
-msgstr ""
+#: include/pt-mbr-partnames.h:79
+msgid "Boot Wizard hidden"
+msgstr "開機精靈隱藏"
-#: libfdisk/src/gpt.c:1196
-#, c-format
-msgid "Partitions entries LBA: %ju"
-msgstr ""
+#: include/pt-mbr-partnames.h:80
+#, fuzzy
+msgid "Acronis FAT32 LBA"
+msgstr "W95 FAT32 (LBA)"
-#: libfdisk/src/gpt.c:1197
-#, fuzzy, c-format
-msgid "Allocated partition entries: %ju"
-msgstr "已選分割區 %d\n"
+#: include/pt-mbr-partnames.h:82
+msgid "Solaris"
+msgstr "Solaris"
-#: libfdisk/src/gpt.c:1206
-msgid "UUID"
-msgstr ""
+#: include/pt-mbr-partnames.h:83
+msgid "DRDOS/sec (FAT-12)"
+msgstr "DRDOS/sec (FAT-12)"
-#: libfdisk/src/gpt.c:1445
-msgid "Disk does not contain a valid backup header."
-msgstr ""
+#: include/pt-mbr-partnames.h:84
+msgid "DRDOS/sec (FAT-16 < 32M)"
+msgstr "DRDOS/sec (FAT-16 < 32M)"
-#: libfdisk/src/gpt.c:1450
-msgid "Invalid primary header CRC checksum."
-msgstr ""
+#: include/pt-mbr-partnames.h:85
+msgid "DRDOS/sec (FAT-16)"
+msgstr "DRDOS/sec (FAT-16)"
-#: libfdisk/src/gpt.c:1454
-msgid "Invalid backup header CRC checksum."
-msgstr ""
+#: include/pt-mbr-partnames.h:86
+msgid "Syrinx"
+msgstr "Syrinx"
-#: libfdisk/src/gpt.c:1459
-#, fuzzy
-msgid "Invalid partition entry checksum."
-msgstr "無效的分割區類型『%c』\n"
+#: include/pt-mbr-partnames.h:87
+msgid "Non-FS data"
+msgstr "Non-FS 資料"
-#: libfdisk/src/gpt.c:1464
-msgid "Invalid primary header LBA sanity checks."
-msgstr ""
+#: include/pt-mbr-partnames.h:88
+msgid "CP/M / CTOS / ..."
+msgstr "CP/M / CTOS /…"
-#: libfdisk/src/gpt.c:1468
-msgid "Invalid backup header LBA sanity checks."
-msgstr ""
+#: include/pt-mbr-partnames.h:90
+msgid "Dell Utility"
+msgstr "Dell 公用程式"
-#: libfdisk/src/gpt.c:1473
-msgid "MyLBA mismatch with real position at primary header."
-msgstr ""
+#: include/pt-mbr-partnames.h:91
+msgid "BootIt"
+msgstr "BootIt"
-#: libfdisk/src/gpt.c:1477
-msgid "MyLBA mismatch with real position at backup header."
-msgstr ""
+#: include/pt-mbr-partnames.h:92
+msgid "DOS access"
+msgstr "DOS 存取"
-#: libfdisk/src/gpt.c:1482
-msgid "Disk is to small to hold all data."
-msgstr ""
+#: include/pt-mbr-partnames.h:94
+msgid "DOS R/O"
+msgstr "DOS R/O"
-#: libfdisk/src/gpt.c:1492
-msgid "Primary and backup header mismatch."
-msgstr ""
+#: include/pt-mbr-partnames.h:101
+msgid "BeOS fs"
+msgstr "BeOS fs"
-#: libfdisk/src/gpt.c:1498
-#, fuzzy, c-format
-msgid "Partition %u overlaps with partition %u."
-msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
+#: include/pt-mbr-partnames.h:103
+msgid "EFI (FAT-12/16/32)"
+msgstr "EFI (FAT-12/16/32)"
-#: libfdisk/src/gpt.c:1505
-#, fuzzy, c-format
-msgid "Partition %u is too big for the disk."
-msgstr "分割重疊在之上磁碟。\n"
+#: include/pt-mbr-partnames.h:104
+msgid "Linux/PA-RISC boot"
+msgstr "Linux/PA-RISC 開機"
-#: libfdisk/src/gpt.c:1512
-#, fuzzy, c-format
-msgid "Partition %u ends before it starts."
-msgstr "分割區結尾小於磁區 0"
+#: include/pt-mbr-partnames.h:107
+msgid "DOS secondary"
+msgstr "DOS 次級"
-#: libfdisk/src/gpt.c:1520
-msgid "No errors detected."
+#: include/pt-mbr-partnames.h:108
+msgid "EBBR protective"
msgstr ""
-#: libfdisk/src/gpt.c:1521
+#: include/pt-mbr-partnames.h:110
+msgid "VMware VMKCORE"
+msgstr "VMware VMKCORE"
+
+#: include/pt-mbr-partnames.h:111 libfdisk/src/sun.c:54
+msgid "Linux raid autodetect"
+msgstr "Linux raid 自動偵測"
+
+#: include/pt-mbr-partnames.h:114
+msgid "LANstep"
+msgstr "LANstep"
+
+#: include/pt-mbr-partnames.h:115
+msgid "BBT"
+msgstr "BBT"
+
+#: lib/blkdev.c:286
#, fuzzy, c-format
-msgid "Header version: %s"
-msgstr "剖析錯誤：%s"
+msgid "warning: %s is misaligned"
+msgstr "警告：%s 被 misaligned"
-#: libfdisk/src/gpt.c:1522
+#: lib/blkdev.c:398
#, fuzzy, c-format
-msgid "Using %u out of %d partitions."
-msgstr "怪異的，只有 %d 分割區定義。"
+msgid "unsupported lock mode: %s"
+msgstr "不受支援的命令"
-#: libfdisk/src/gpt.c:1528
+#: lib/blkdev.c:408
#, c-format
-msgid "A total of %ld free sectors available in %d segment(s) (largest %ld)."
+msgid "%s: %s: device already locked, waiting to get lock ... "
msgstr ""
-#: libfdisk/src/gpt.c:1532
+#: lib/blkdev.c:417
+#, fuzzy, c-format
+msgid "%s: device already locked"
+msgstr "%s 已經掛載"
+
+#: lib/blkdev.c:420
+#, fuzzy, c-format
+msgid "%s: failed to get lock"
+msgstr "設定路徑時失敗"
+
+#: lib/blkdev.c:423
#, c-format
-msgid "Detected %d error(s)."
-msgstr ""
+msgid "OK\n"
+msgstr "確定\n"
-#: libfdisk/src/gpt.c:1649
+#: libfdisk/src/ask.c:509 libfdisk/src/ask.c:521
#, fuzzy, c-format
-msgid "Partition %zd is already defined. Delete it before re-adding it."
-msgstr "å\88\86å\89²å\8d\80 %d å·²ç¶\93å®\9a義ã\80\82 å\9c¨é\87\8dæ\96°å\8a å\85¥ä¹\8bå\89\8då\88ªé\99¤å®\83ã\80\82\n"
+msgid "Selected partition %ju"
+msgstr "å·²é\81¸å\88\86å\89²å\8d\80 %d\n"
-#: libfdisk/src/gpt.c:1655
+#: libfdisk/src/ask.c:512
#, fuzzy
-msgid "All partitions are already in use."
-msgstr "這個分割區已在使用中"
+msgid "No partition is defined yet!"
+msgstr "尚無分割區被定義！\n"
-#: libfdisk/src/gpt.c:1696
+#: libfdisk/src/ask.c:524
+#, fuzzy
+msgid "No free partition available!"
+msgstr "沒有可用的磁區存在\n"
+
+#: libfdisk/src/ask.c:534
+msgid "Partition number"
+msgstr "分割區編號"
+
+#: libfdisk/src/ask.c:1031
#, fuzzy, c-format
-msgid "Sector %ju already used."
-msgstr "磁區 %llu 已經配置\n"
+msgid "Created a new partition %d of type '%s' and of size %s."
+msgstr "分割 %d 的型態 %s 和的大小 %s 是設定\n"
-#: libfdisk/src/gpt.c:1726
+#: libfdisk/src/bsd.c:165
#, fuzzy, c-format
-msgid "Could not create partition %zd"
-msgstr "不要新增一個分割區"
+msgid "Partition %zd: has invalid starting sector 0."
+msgstr "分割區 %s 具有無效的開始磁區 0。\n"
-#: libfdisk/src/gpt.c:1807
+#: libfdisk/src/bsd.c:180
#, fuzzy, c-format
-msgid "Created a new GPT disklabel (GUID: %s)"
-msgstr "建立新的清空 Sun disklabel"
+msgid "There is no *BSD partition on %s."
+msgstr "沒有任何 *BSD 分割位於 %s。\n"
-#: libfdisk/src/gpt.c:1844
-msgid "Enter new disk UUID (in 8-4-4-4-12 format)"
-msgstr ""
+#: libfdisk/src/bsd.c:258 libfdisk/src/dos.c:1050
+#, fuzzy
+msgid "First cylinder"
+msgstr "磁柱"
-#: libfdisk/src/gpt.c:1851 libfdisk/src/gpt.c:1979
+#: libfdisk/src/bsd.c:291 libfdisk/src/dos.c:1436
#, fuzzy
-msgid "Failed to parse your UUID."
-msgstr "剖析 %s 時失敗"
+msgid "Last cylinder, +/-cylinders or +/-size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+
+#: libfdisk/src/bsd.c:296 libfdisk/src/dos.c:1441 libfdisk/src/gpt.c:2551
+#, fuzzy
+msgid "Last sector, +/-sectors or +/-size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: libfdisk/src/gpt.c:1866
+#: libfdisk/src/bsd.c:381
#, fuzzy, c-format
-msgid "Disk identifier changed from %s to %s."
-msgstr "變更根從『%s』到『%s 時失敗』"
+msgid "The device %s does not contain BSD disklabel."
+msgstr "%s 不含任何磁碟標籤。\n"
-#: libfdisk/src/gpt.c:1972
-msgid "New UUID (in 8-4-4-4-12 format)"
+#: libfdisk/src/bsd.c:383
+#, fuzzy
+msgid "Do you want to create a BSD disklabel?"
+msgstr "您要建立磁碟標籤嗎？(y/n) "
+
+#: libfdisk/src/bsd.c:449
+#, fuzzy
+msgid "Disk"
+msgstr "磁碟：%.*s\n"
+
+#: libfdisk/src/bsd.c:456
+msgid "Packname"
msgstr ""
-#: libfdisk/src/gpt.c:1994
-#, fuzzy, c-format
-msgid "Partition UUID changed from %s to %s"
-msgstr "變更根從『%s』到『%s 時失敗』"
+#: libfdisk/src/bsd.c:463 libfdisk/src/sun.c:1137
+msgid "Flags"
+msgstr "屬性旗標"
+
+#: libfdisk/src/bsd.c:466
+msgid " removable"
+msgstr " 可移除的"
+
+#: libfdisk/src/bsd.c:467
+msgid " ecc"
+msgstr " ecc"
+
+#: libfdisk/src/bsd.c:468
+msgid " badsect"
+msgstr " 不良磁區"
-#: libfdisk/src/gpt.c:2017
+#: libfdisk/src/bsd.c:476
#, fuzzy
-msgid "New name"
-msgstr "使ç\94¨è\80\85å\90\8d稱"
+msgid "Bytes/Sector"
+msgstr "ä½\8då\85\83çµ\84/ç£\81å\8d\80"
-#: libfdisk/src/gpt.c:2039
-#, fuzzy, c-format
-msgid "Partition name changed from '%s' to '%.*s'"
-msgstr "變更根從『%s』到『%s 時失敗』"
+#: libfdisk/src/bsd.c:481
+#, fuzzy
+msgid "Tracks/Cylinder"
+msgstr "磁軌/磁柱"
-#: libfdisk/src/label.c:102
-msgid "Incomplete geometry setting."
-msgstr ""
+#: libfdisk/src/bsd.c:486
+#, fuzzy
+msgid "Sectors/Cylinder"
+msgstr "磁區/磁柱"
-#: libfdisk/src/parttype.c:85 misc-utils/findmnt.c:631 schedutils/ionice.c:79
-#: sys-utils/hwclock.c:317
-msgid "unknown"
-msgstr "不明的"
+#: libfdisk/src/bsd.c:491 libfdisk/src/bsd.c:1029 libfdisk/src/dos.c:2806
+#: libfdisk/src/sgi.c:1162 libfdisk/src/sun.c:203 libfdisk/src/sun.c:1133
+msgid "Cylinders"
+msgstr "磁柱"
-#: libfdisk/src/sgi.c:39
-msgid "SGI volhdr"
-msgstr "SGI volhdr"
+#: libfdisk/src/bsd.c:496 libfdisk/src/sun.c:783
+#, fuzzy
+msgid "Rpm"
+msgstr "rpm"
-#: libfdisk/src/sgi.c:40
-msgid "SGI trkrepl"
-msgstr "SGI trkrepl"
+#: libfdisk/src/bsd.c:501 libfdisk/src/sgi.c:291 libfdisk/src/sun.c:803
+#, fuzzy
+msgid "Interleave"
+msgstr "交錯"
-#: libfdisk/src/sgi.c:41
-msgid "SGI secrepl"
-msgstr "SGI secrepl"
+#: libfdisk/src/bsd.c:506
+#, fuzzy
+msgid "Trackskew"
+msgstr "trackskew"
-#: libfdisk/src/sgi.c:42
-msgid "SGI raw"
-msgstr "SGI raw"
+#: libfdisk/src/bsd.c:511
+#, fuzzy
+msgid "Cylinderskew"
+msgstr "cylinderskew"
-#: libfdisk/src/sgi.c:43
-msgid "SGI bsd"
-msgstr "SGI bsd"
+#: libfdisk/src/bsd.c:516
+#, fuzzy
+msgid "Headswitch"
+msgstr "headswitch"
-#: libfdisk/src/sgi.c:44
-msgid "SGI sysv"
-msgstr "SGI sysv"
+#: libfdisk/src/bsd.c:521
+#, fuzzy
+msgid "Track-to-track seek"
+msgstr "軌對軌搜尋"
-#: libfdisk/src/sgi.c:45
-msgid "SGI volume"
-msgstr "SGI volume"
+#: libfdisk/src/bsd.c:611
+msgid "bytes/sector"
+msgstr "位元組/磁區"
-#: libfdisk/src/sgi.c:46
-msgid "SGI efs"
-msgstr "SGI efs"
+#: libfdisk/src/bsd.c:614
+msgid "sectors/track"
+msgstr "磁區/磁軌"
-#: libfdisk/src/sgi.c:47
-msgid "SGI lvol"
-msgstr "SGI lvol"
+#: libfdisk/src/bsd.c:615
+msgid "tracks/cylinder"
+msgstr "磁軌/磁柱"
-#: libfdisk/src/sgi.c:48
-msgid "SGI rlvol"
-msgstr "SGI rlvol"
+#: libfdisk/src/bsd.c:616
+msgid "cylinders"
+msgstr "磁柱"
-#: libfdisk/src/sgi.c:49
-msgid "SGI xfs"
-msgstr "SGI xfs"
+#: libfdisk/src/bsd.c:621
+msgid "sectors/cylinder"
+msgstr "磁區/磁柱"
-#: libfdisk/src/sgi.c:50
-msgid "SGI xfslog"
-msgstr "SGI xfslog"
+#: libfdisk/src/bsd.c:624
+msgid "rpm"
+msgstr "rpm"
-#: libfdisk/src/sgi.c:51
-msgid "SGI xlv"
-msgstr "SGI xlv"
+#: libfdisk/src/bsd.c:625
+msgid "interleave"
+msgstr "交錯"
-#: libfdisk/src/sgi.c:52
-msgid "SGI xvm"
-msgstr "SGI xvm"
+#: libfdisk/src/bsd.c:626
+msgid "trackskew"
+msgstr "trackskew"
-#: libfdisk/src/sgi.c:54 libfdisk/src/sun.c:45
-msgid "Linux native"
-msgstr "Linux native"
+#: libfdisk/src/bsd.c:627
+msgid "cylinderskew"
+msgstr "cylinderskew"
-#: libfdisk/src/sgi.c:141
-msgid "SGI info created on second sector"
+#: libfdisk/src/bsd.c:629
+msgid "headswitch"
+msgstr "headswitch"
+
+#: libfdisk/src/bsd.c:630
+msgid "track-to-track seek"
+msgstr "軌對軌搜尋"
+
+#: libfdisk/src/bsd.c:652
+#, c-format
+msgid "The bootstrap file %s successfully loaded."
msgstr ""
-#: libfdisk/src/sgi.c:241
+#: libfdisk/src/bsd.c:674
+#, fuzzy, c-format
+msgid "Bootstrap: %1$sboot -> boot%1$s (default %1$s)"
+msgstr "啟動程式：%sboot -> boot%s (%s)："
+
+#: libfdisk/src/bsd.c:705
#, fuzzy
-msgid "Detected sgi disklabel with wrong checksum."
-msgstr "å\81µæ¸¬å\88° sgi ç£\81ç¢\9fæ¨\99籤è\88\87é\8c¯èª¤ç\9a\84總å\92\8c檢æ\9f¥ç¢¼ã\80\82\n"
+msgid "Bootstrap overlaps with disklabel!"
+msgstr "å\95\9få\8b\95ç¨\8bå¼\8fè\88\87ç£\81ç¢\9fæ¨\99籤é\87\8dç\96\8aï¼\81\n"
-#: libfdisk/src/sgi.c:260
+#: libfdisk/src/bsd.c:729
#, fuzzy, c-format
-msgid ""
-"Label geometry: %d heads, %llu sectors\n"
-" %llu cylinders, %d physical cylinders\n"
-" %d extra sects/cyl, interleave %d:1\n"
-msgstr ""
-"\n"
-"磁碟 %s (SGI 磁碟標貼)：%d 前端，%llu 磁區\n"
-"%llu 磁柱，%d 實體磁柱\n"
-"%d 額外 sects/cyl，交插 %d:1\n"
-"%s\n"
-"單位=%s 的 %d * %ld 位元組\n"
-"\n"
+msgid "Bootstrap installed on %s."
+msgstr "啟動程式已安裝於 %s。\n"
-#: libfdisk/src/sgi.c:274
-msgid "Pt#"
+#: libfdisk/src/bsd.c:911
+#, c-format
+msgid "Disklabel written to %s. (Don't forget to write the %s disklabel too.)"
msgstr ""
-#: libfdisk/src/sgi.c:276
-msgid "Info"
-msgstr ""
+#: libfdisk/src/bsd.c:914
+#, fuzzy, c-format
+msgid "Disklabel written to %s."
+msgstr "硬碟: %s\n"
-#: libfdisk/src/sgi.c:336
+#: libfdisk/src/bsd.c:920 libfdisk/src/context.c:776
#, fuzzy
-msgid "Sector"
-msgstr "磁區"
+msgid "Syncing disks."
+msgstr "同步磁碟。\n"
-#: libfdisk/src/sgi.c:365
+#: libfdisk/src/bsd.c:961
+msgid "BSD label is not nested within a DOS partition."
+msgstr ""
+
+#: libfdisk/src/bsd.c:989
#, fuzzy, c-format
-msgid "Bootfile: %s"
-msgstr "檔案 %s"
+msgid "BSD partition '%c' linked to DOS partition %zu."
+msgstr "鏈結 BSD 分割到 non-BSD 分割"
-#: libfdisk/src/sgi.c:414
-#, fuzzy
-msgid ""
-"Invalid Bootfile! The bootfile must be an absolute non-zero pathname,e.g. \"/"
-"unix\" or \"/unix.save\"."
+#: libfdisk/src/bsd.c:1025
+msgid "Slice"
msgstr ""
-"\n"
-"無效的開機檔案！\n"
-"\t開機檔案名稱必須是絕對且非零路徑，\n"
-"\t例如「/unix」或「/unix.save」。\n"
-#: libfdisk/src/sgi.c:420
-#, fuzzy, c-format
-msgid "Name of Bootfile too long: %zu bytes maximum."
+#: libfdisk/src/bsd.c:1032
+msgid "Fsize"
msgstr ""
-"\n"
-"\t開機檔案的名稱太長：最大為 16 位元組。\n"
-#: libfdisk/src/sgi.c:425
-#, fuzzy
-msgid "Bootfile must have a fully qualified pathname."
+#: libfdisk/src/bsd.c:1033
+msgid "Bsize"
msgstr ""
-"\n"
-"\t開機檔案必須有完全合法的路徑名稱。\n"
-#: libfdisk/src/sgi.c:431
-#, fuzzy
-msgid ""
-"Be aware, that the bootfile is not checked for existence. SGI's default is "
-"\"/unix\" and for backup \"/unix.save\"."
+#: libfdisk/src/bsd.c:1034
+msgid "Cpg"
msgstr ""
-"\n"
-"\t要知道，開機檔案並未檢查是否存在。\n"
-"\tSGI 預設為「/unix」和用於備份的「/unix.save」。\n"
-#: libfdisk/src/sgi.c:448
+#: libfdisk/src/context.c:766
#, fuzzy, c-format
-msgid "The current boot file is: %s"
-msgstr ""
-"\n"
-"目前的啟動檔案為：%s\n"
+msgid "%s: fsync device failed"
+msgstr "%s：lseek 失敗"
-#: libfdisk/src/sgi.c:450
-#, fuzzy
-msgid "Enter of the new boot file"
-msgstr "請輸入新的啟動檔案名稱："
-
-#: libfdisk/src/sgi.c:455
-#, fuzzy
-msgid "Boot file unchanged"
-msgstr "啟動檔案未變更\n"
-
-#: libfdisk/src/sgi.c:467
+#: libfdisk/src/context.c:771 misc-utils/wipefs.c:619
#, fuzzy, c-format
-msgid "Bootfile is changed to \"%s\"."
-msgstr ""
-"\n"
-"\t開機檔案已變更為「%s」。\n"
+msgid "%s: close device failed"
+msgstr "%s：lseek 失敗"
-#: libfdisk/src/sgi.c:607
+#: libfdisk/src/context.c:854
#, fuzzy
-msgid "More than one entire disk entry present."
-msgstr "å\98å\9c¨å¤\9aæ\96¼ä¸\80å\80\8bå®\8cæ\95´ç£\81ç¢\9fé \85ç\9b®。\n"
+msgid "Calling ioctl() to re-read partition table."
+msgstr "å\91¼å\8f« ioctl() 以é\87\8dæ\96°è®\80å\8f\96å\88\86å\89²è¡¨。\n"
-#: libfdisk/src/sgi.c:614
+#: libfdisk/src/context.c:862
#, fuzzy
-msgid "No partitions defined"
-msgstr "無已定義分割區\n"
+msgid "Re-reading the partition table failed."
+msgstr "重新讀取分割表…\n"
-#: libfdisk/src/sgi.c:622
+#: libfdisk/src/context.c:864
#, fuzzy
-msgid "IRIX likes when Partition 11 covers the entire disk."
-msgstr "IRIX 偏好分割區 11 涵蓋整個磁碟。\n"
-
-#: libfdisk/src/sgi.c:626
-#, fuzzy, c-format
-msgid "The entire disk partition should start at block 0, not at diskblock %d."
+msgid "The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or partx(8)."
msgstr ""
-"整個磁碟分割區應該始於區塊 0，\n"
-"而非磁碟區塊 %d。\n"
+"\n"
+"警告：Re-reading 分割表失敗的與錯誤 %d：%m。\n"
+"內核仍然使用舊的表格。新的表格將被使用於\n"
+"下一個重新開機或之後您運行 partprobe (8) 或 kpartx (8)\n"
-#: libfdisk/src/sgi.c:637
-#, fuzzy
-msgid "Partition 11 should cover the entire disk."
-msgstr "分割 11 應該封套整個磁碟。\n"
+#: libfdisk/src/context.c:954
+#, fuzzy, c-format
+msgid "Failed to remove partition %zu from system"
+msgstr "移除分割時失敗"
-#: libfdisk/src/sgi.c:659
+#: libfdisk/src/context.c:963
#, fuzzy, c-format
-msgid "The Partition %d and %d overlap by %d sectors."
-msgstr "分割區 %d 與 %d 有 %d 塊磁區相互重疊。\n"
+msgid "Failed to update system information about partition %zu"
+msgstr "%s：不是區塊裝置"
-#: libfdisk/src/sgi.c:668 libfdisk/src/sgi.c:689
+#: libfdisk/src/context.c:983
#, fuzzy, c-format
-msgid "Unused gap of %8u sectors - sectors %8u-%u"
-msgstr "%8u 塊磁區的未使用間隙 - 磁區 %8u-%u\n"
+msgid "Failed to add partition %zu to system"
+msgstr "加入分割時失敗"
-#: libfdisk/src/sgi.c:700
+#: libfdisk/src/context.c:989
#, fuzzy
-msgid "The boot partition does not exist."
+msgid "The kernel still uses the old partitions. The new table will be used at the next reboot. "
msgstr ""
"\n"
-"開機分割區不存在。\n"
+"警告：Re-reading 分割表失敗的與錯誤 %d：%m。\n"
+"內核仍然使用舊的表格。新的表格將被使用於\n"
+"下一個重新開機或之後您運行 partprobe (8) 或 kpartx (8)\n"
-#: libfdisk/src/sgi.c:704
+#: libfdisk/src/context.c:1193
#, fuzzy
-msgid "The swap partition does not exist."
-msgstr ""
-"\n"
-"交換分割區不存在。\n"
+msgid "cylinder"
+msgid_plural "cylinders"
+msgstr[0] "磁柱"
-#: libfdisk/src/sgi.c:708
+#: libfdisk/src/context.c:1194
#, fuzzy
-msgid "The swap partition has no swap type."
+msgid "sector"
+msgid_plural "sectors"
+msgstr[0] "磁區"
+
+#: libfdisk/src/context.c:1550
+msgid "Incomplete geometry setting."
msgstr ""
-"\n"
-"交換分割區不具有交換類型。\n"
-#: libfdisk/src/sgi.c:711
+#: libfdisk/src/dos.c:217
#, fuzzy
-msgid "You have chosen an unusual boot file name."
-msgstr "\t您選擇了一個不尋常的啟動檔案名稱。\n"
+msgid "All primary partitions have been defined already."
+msgstr "所有主要分割區已被定義！\n"
-#: libfdisk/src/sgi.c:762
+#: libfdisk/src/dos.c:220
#, fuzzy
-msgid "Partition overlap on the disk."
-msgstr "分割重疊在之上磁碟。\n"
+msgid "Primary partition not available."
+msgstr "沒有可用的磁區存在\n"
-#: libfdisk/src/sgi.c:840 libfdisk/src/sun.c:471
+#: libfdisk/src/dos.c:274
#, fuzzy, c-format
-msgid "Partition %zd is already defined. Delete it before re-adding it."
-msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+msgid "Failed to read extended partition table (offset=%ju)"
+msgstr "%s：無法讀取分割表"
-#: libfdisk/src/sgi.c:845
+#: libfdisk/src/dos.c:344
#, fuzzy
-msgid "Attempting to generate entire disk entry automatically."
-msgstr "試圖自動產生整個磁碟項目。\n"
+msgid "You can set geometry from the extra functions menu."
+msgstr ""
+"%s%s.\n"
+"您可以從額外函式選單來做這個。\n"
-#: libfdisk/src/sgi.c:850
-#, fuzzy
-msgid "The entire disk is already covered with partitions."
-msgstr "整個磁碟已經被分割區所覆蓋。\n"
+#: libfdisk/src/dos.c:347
+msgid "DOS-compatible mode is deprecated."
+msgstr ""
-#: libfdisk/src/sgi.c:854
+#: libfdisk/src/dos.c:351
#, fuzzy
-msgid "You got a partition overlap on the disk. Fix it first!"
-msgstr "您的磁碟上有重疊的分割區，請先修正它！\n"
+msgid "The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted."
+msgstr ""
+"\n"
+"裝置呈現的邏輯區大小小於\n"
+"實體磁區大小。建議對齊到實體磁區 (或最佳化\n"
+"I/O) 大小邊界，否則效能也許會被影響。\n"
-#: libfdisk/src/sgi.c:858 libfdisk/src/sun.c:487
-#, c-format
-msgid "First %s"
-msgstr "起初 %s"
+#: libfdisk/src/dos.c:357
+msgid "Cylinders as display units are deprecated."
+msgstr ""
-#: libfdisk/src/sgi.c:888 libfdisk/src/sgi.c:941
-#, fuzzy
-msgid ""
-"It is highly recommended that eleventh partition covers the entire disk and "
-"is of type `SGI volume'"
+#: libfdisk/src/dos.c:364
+#, fuzzy, c-format
+msgid "The size of this disk is %s (%ju bytes). DOS partition table format cannot be used on drives for volumes larger than %lu bytes for %lu-byte sectors. Use GUID partition table format (GPT)."
msgstr ""
-"強烈建議第十一塊分割區\n"
-"覆蓋整個磁碟並且為「SGI 卷冊」類型\n"
+"\n"
+"警告：大小的這個磁碟是 %d.%d TB (%llu 位元組)。\n"
+"DOS 分割表格式無法使用的於磁碟用於音量\n"
+"大於 (%llu 位元組) 用於 %ld-byte 磁區。使用退出了 (1) 和 GUID\n"
+"分割表格式 (GPT)。\n"
+"\n"
-#: libfdisk/src/sgi.c:899
+#: libfdisk/src/dos.c:540
#, fuzzy
-msgid "You will get a partition overlap on the disk. Fix it first!"
-msgstr "您的磁碟上將會有重疊的分割區，請先修正它！\n"
+msgid "Bad offset in primary extended partition."
+msgstr "在主要擴充分割區中的不當偏移值\n"
-#: libfdisk/src/sgi.c:906 libfdisk/src/sun.c:567
+#: libfdisk/src/dos.c:554
#, fuzzy, c-format
-msgid "Last %s or +%s or +size{K,M,G,T,P}"
-msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+msgid "Omitting partitions after #%zu. They will be deleted if you save this partition table."
+msgstr ""
+"警告：忽略 #%d 之後的分割區。\n"
+"如果您儲存這個分割表就會刪除它們。\n"
-#: libfdisk/src/sgi.c:976
+#: libfdisk/src/dos.c:587
#, fuzzy, c-format
-msgid ""
-"Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of "
-"%llu.This value may be truncated for devices > 33.8 GB."
-msgstr ""
-"警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
-"這個值也許會被截斷用於裝置>33.8 GB。\n"
+msgid "Extra link pointer in partition table %zu."
+msgstr "警告：在分割表中有額外的鏈結指標 %d\n"
-#: libfdisk/src/sgi.c:1037
-#, fuzzy
-msgid "Created a new SGI disklabel."
-msgstr "建立新的清空 Sun disklabel"
+#: libfdisk/src/dos.c:595
+#, fuzzy, c-format
+msgid "Ignoring extra data in partition table %zu."
+msgstr "警告：忽略分割表 %d 中的額外資料\n"
-#: libfdisk/src/sgi.c:1064
-#, fuzzy
-msgid "Sorry, only for non-empty partitions you can change the tag."
-msgstr "抱歉，只有用於非空分割區您可以變更標籤。\n"
+#: libfdisk/src/dos.c:651
+#, fuzzy, c-format
+msgid "omitting empty partition (%zu)"
+msgstr "忽略空的分割 (%d)\n"
-#: libfdisk/src/sgi.c:1070
-#, fuzzy
-msgid ""
-"Consider leaving partition 9 as volume header (0), and partition 11 as "
-"entire volume (6), as IRIX expects it."
-msgstr ""
-"考慮保留分割區 9 為卷冊標頭 (0)，\n"
-"以及分割區 11 為整個卷冊 (6)，如同 IRIX 所預期。\n"
-"\n"
+#: libfdisk/src/dos.c:711
+#, fuzzy, c-format
+msgid "Created a new DOS (MBR) disklabel with disk identifier 0x%08x."
+msgstr "建立新的 DOS disklabel 與磁碟識別碼 0x%08x。\n"
-#: libfdisk/src/sgi.c:1078
+#: libfdisk/src/dos.c:734
#, fuzzy
-msgid ""
-"It is highly recommended that the partition at offset 0 is of type \"SGI "
-"volhdr\", the IRIX system will rely on it to retrieve from its directory "
-"standalone tools like sash and fx. Only the \"SGI volume\" entire disk "
-"section may violate this. Are you sure about tagging this partition "
-"differently?"
-msgstr ""
-"強烈建議位於偏移 0 的分割區\n"
-"類型為「SGI volhdr」，IRIX 系統將會依靠它以\n"
-"取回它的目錄獨立工具，諸如 sash 和 fx。\n"
-"只有「SGI 卷冊」整個磁碟區段的話，也許會對此有所妨害。\n"
-"如果您確定將這個分割區貼上不同的標籤，就輸入 YES。\n"
+msgid "Enter the new disk identifier"
+msgstr "變更磁碟識別碼"
-#: libfdisk/src/sun.c:32
-msgid "Unassigned"
-msgstr "未指定"
+#: libfdisk/src/dos.c:743
+#, fuzzy
+msgid "Incorrect value."
+msgstr "無效的設定值"
-#: libfdisk/src/sun.c:34
-msgid "SunOS root"
-msgstr "SunOS 根分割區"
+#: libfdisk/src/dos.c:756
+#, fuzzy, c-format
+msgid "Disk identifier changed from 0x%08x to 0x%08x."
+msgstr "磁碟識別碼：0x%08x\n"
-#: libfdisk/src/sun.c:35
-msgid "SunOS swap"
-msgstr "SunOS 交換分割區"
+#: libfdisk/src/dos.c:952
+#, fuzzy, c-format
+msgid "Ignoring extra extended partition %zu"
+msgstr "忽略額外的擴充分割區 %d\n"
-#: libfdisk/src/sun.c:36
-msgid "SunOS usr"
-msgstr "SunOS usr 分割區"
+#: libfdisk/src/dos.c:966
+#, fuzzy, c-format
+msgid "Invalid flag 0x%02x%02x of EBR (for partition %zu) will be corrected by w(rite)."
+msgstr "警告：分割表 %2$d 的無效旗標 0x%1$04x 將由 w(rite) 所修正\n"
-#: libfdisk/src/sun.c:37
-msgid "Whole disk"
-msgstr "整顆磁碟"
+#: libfdisk/src/dos.c:1037
+#, fuzzy, c-format
+msgid "Start sector %ju out of range."
+msgstr "數值超出範圍。\n"
-#: libfdisk/src/sun.c:38
-msgid "SunOS stand"
-msgstr "SunOS stand 分割區"
+#: libfdisk/src/dos.c:1276 libfdisk/src/gpt.c:2409 libfdisk/src/sgi.c:842
+#: libfdisk/src/sun.c:528
+#, fuzzy, c-format
+msgid "Partition %zu is already defined. Delete it before re-adding it."
+msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
-#: libfdisk/src/sun.c:39
-msgid "SunOS var"
-msgstr "SunOS var 分割區"
+#: libfdisk/src/dos.c:1291 libfdisk/src/dos.c:1317 libfdisk/src/dos.c:1375
+#: libfdisk/src/dos.c:1407 libfdisk/src/gpt.c:2418
+#, fuzzy
+msgid "No free sectors available."
+msgstr "沒有可用的磁區存在\n"
-#: libfdisk/src/sun.c:40
-msgid "SunOS home"
-msgstr "SunOS home 分割區"
+#: libfdisk/src/dos.c:1342
+#, fuzzy, c-format
+msgid "Sector %ju is already allocated."
+msgstr "磁區 %llu 已經配置\n"
-#: libfdisk/src/sun.c:41
-msgid "SunOS alt sectors"
-msgstr "SunOS alt 磁區"
+#: libfdisk/src/dos.c:1562
+#, fuzzy, c-format
+msgid "Adding logical partition %zu"
+msgstr "加入邏輯分割區 %d\n"
-#: libfdisk/src/sun.c:42
-msgid "SunOS cachefs"
-msgstr "SunOS 快取檔案系統"
+#: libfdisk/src/dos.c:1594
+#, fuzzy, c-format
+msgid "Partition %zu: contains sector 0"
+msgstr "警告：分割區 %d 含有磁區 0\n"
-#: libfdisk/src/sun.c:43
-msgid "SunOS reserved"
-msgstr "SunOS 保留區"
+#: libfdisk/src/dos.c:1598
+#, fuzzy, c-format
+msgid "Partition %zu: head %d greater than maximum %d"
+msgstr "分割區 %d: 磁頭 %d 大於最大值 %d\n"
-#: libfdisk/src/sun.c:128
-#, fuzzy
-msgid ""
-"Detected sun disklabel with wrong checksum. Probably you'll have to set all "
-"the values, e.g. heads, sectors, cylinders and partitions or force a fresh "
-"label (s command in main menu)"
-msgstr ""
-"偵測到具有錯誤總和檢查碼的 sun 磁碟標籤。\n"
-"也許您必須設定所有的值，\n"
-"例如：磁頭、磁區、磁柱和分割區，\n"
-"或是強制設定新的標籤 (使用主選單的 s 命令)\n"
+#: libfdisk/src/dos.c:1603
+#, fuzzy, c-format
+msgid "Partition %zu: sector %d greater than maximum %ju"
+msgstr "分割區 %d: 磁區 %d 大於最大值 %llu\n"
-#: libfdisk/src/sun.c:141
+#: libfdisk/src/dos.c:1609
#, fuzzy, c-format
-msgid "Detected sun disklabel with wrong version [%d]."
-msgstr "å\81µæ¸¬å\88°å\85·æ\9c\89é\8c¯èª¤ç\89\88æ\9c¬ [0x%08x] ç\9a\84 sun ç£\81ç¢\9fæ¨\99籤ã\80\82\n"
+msgid "Partition %zu: cylinder %d greater than maximum %ju"
+msgstr "å\88\86å\89²å\8d\80 %dï¼\9aç£\81æ\9f± %d 大æ\96¼æ\9c\80大å\80¼ %llu\n"
-#: libfdisk/src/sun.c:146
+#: libfdisk/src/dos.c:1616
#, fuzzy, c-format
-msgid "Detected sun disklabel with wrong vtoc.sanity [0x%08x]."
-msgstr "å\81µæ¸¬å\88°å\85·æ\9c\89ä¸\8då®\8cæ\95´æ\80§ [0x%08x] ç\9a\84 sun ç£\81ç¢\9fæ¨\99籤ã\80\82\n"
+msgid "Partition %zu: LBA sector %u disagrees with C/H/S calculated sector %u"
+msgstr "å\88\86å\89²å\8d\80 %d: ä¹\8bå\89\8dç£\81å\8d\80 %d è\88\87總è¨\88ä¸\8dä¸\80è\87´ %d\n"
-#: libfdisk/src/sun.c:151
+#: libfdisk/src/dos.c:1675
#, fuzzy, c-format
-msgid "Detected sun disklabel with wrong vtoc.nparts [%u]."
-msgstr "å\81µæ¸¬å\88°å\85·æ\9c\89é\8c¯èª¤å\88\86å\89²å\8d\80æ\95¸ [%u] ç\9a\84 sun ç£\81ç¢\9fæ¨\99籤ã\80\82\n"
+msgid "Partition %zu: different physical/logical beginnings (non-Linux?): phys=(%d, %d, %d), logical=(%d, %d, %d)"
+msgstr "å\88\86å\89²å\8d\80 %d æ\9c\89ä¸\8då\90\8cç\9a\84實é«\94/é\82\8f輯é\96\8bå§\8bä½\8dç½® (é\9d\9e Linuxï¼\9f)ï¼\9a\n"
-#: libfdisk/src/sun.c:156
-#, fuzzy
-msgid ""
-"Warning: Wrong values need to be fixed up and will be corrected by w(rite)"
-msgstr "警告：錯誤值需要經由 w(rite) 而修正\n"
+#: libfdisk/src/dos.c:1687
+#, fuzzy, c-format
+msgid "Partition %zu: different physical/logical endings: phys=(%d, %d, %d), logical=(%d, %d, %d)"
+msgstr "分割區 %d 有不同的實體/邏輯結束位置：\n"
-#: libfdisk/src/sun.c:185
-msgid "Sectors/track"
-msgstr "磁區/磁軌"
+#: libfdisk/src/dos.c:1697
+#, fuzzy, c-format
+msgid "Partition %zu: does not end on cylinder boundary."
+msgstr "分割區 %d 並非終於磁柱邊界。\n"
-#: libfdisk/src/sun.c:229
+#: libfdisk/src/dos.c:1748
#, fuzzy, c-format
-msgid ""
-"BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu. This "
-"value may be truncated for devices > 33.8 GB."
-msgstr ""
-"警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
-"這個值也許會被截斷用於裝置>33.8 GB。\n"
+msgid "Partition %zu: bad start-of-data."
+msgstr "分割區結尾小於磁區 0"
-#: libfdisk/src/sun.c:282
-#, fuzzy
-msgid "Created a new Sun disklabel."
-msgstr "建立新的清空 Sun disklabel"
+#: libfdisk/src/dos.c:1764
+#, fuzzy, c-format
+msgid "Partition %zu: overlaps partition %zu."
+msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
-#: libfdisk/src/sun.c:395
+#: libfdisk/src/dos.c:1793
#, fuzzy, c-format
-msgid "Partition %d doesn't end on cylinder boundary."
-msgstr "分割區 %d 並非結束於磁柱邊界\n"
+msgid "Partition %zu: empty."
+msgstr "分割區 (a-%c)："
-#: libfdisk/src/sun.c:415
+#: libfdisk/src/dos.c:1800
#, fuzzy, c-format
-msgid "Partition %d overlaps with others in sectors %d-%d."
-msgstr "分割區 %d 與 %d-%d 中的其他磁區重疊\n"
+msgid "Logical partition %zu: not entirely in partition %zu."
+msgstr "邏輯分割區 %d 並非完整處於分割區 %d 中\n"
-#: libfdisk/src/sun.c:435
-#, fuzzy
-msgid "No partitions defined."
-msgstr "無已定義分割區\n"
+#: libfdisk/src/dos.c:1809 libfdisk/src/gpt.c:2315
+msgid "No errors detected."
+msgstr ""
-#: libfdisk/src/sun.c:440
+#: libfdisk/src/dos.c:1811
#, fuzzy, c-format
-msgid "Unused gap - sectors 0-%d."
-msgstr "未使用的間隙 - 磁區 0-%d\n"
+msgid "Total allocated sectors %ju greater than the maximum %ju."
+msgstr "配置的磁區總計 %llu 大於最大值 %llu\n"
-#: libfdisk/src/sun.c:442 libfdisk/src/sun.c:448
+#: libfdisk/src/dos.c:1814
#, fuzzy, c-format
-msgid "Unused gap - sectors %d-%d."
-msgstr "未使用的間隙 - 磁區 %d-%d\n"
+msgid "Remaining %ju unallocated %ld-byte sectors."
+msgstr "其餘 %lld unallocated %ld-byte 磁區\n"
+
+#: libfdisk/src/dos.c:1818 libfdisk/src/gpt.c:2335
+#, c-format
+msgid "%d error detected."
+msgid_plural "%d errors detected."
+msgstr[0] ""
-#: libfdisk/src/sun.c:482
+#: libfdisk/src/dos.c:1851
#, fuzzy
-msgid ""
-"Other partitions already cover the whole disk. Delete some/shrink them "
-"before retry."
-msgstr ""
-"其他分割區已經涵蓋整個磁碟。\n"
-"請於重試之前刪除部分或縮減它們。\n"
+msgid "The maximum number of partitions has been created."
+msgstr "已建立分割區的最大數量\n"
-#: libfdisk/src/sun.c:521
-#, c-format
-msgid "Aligning the first sector from %u to %u to be on cylinder boundary."
+#: libfdisk/src/dos.c:1884 libfdisk/src/dos.c:1899 libfdisk/src/dos.c:2352
+#, fuzzy
+msgid "Extended partition already exists."
+msgstr "這個分割區已經存在。\n"
+
+#: libfdisk/src/dos.c:1914
+msgid "Extended partition does not exists. Failed to add logical partition."
msgstr ""
-#: libfdisk/src/sun.c:528
+#: libfdisk/src/dos.c:1974
#, fuzzy
-msgid ""
-"It is highly recommended that the third partition covers the whole disk and "
-"is of type `Whole disk'"
-msgstr ""
-"強烈建議第三分割區包括\n"
-"整個磁碟並且為「整顆磁碟」類型\n"
+msgid "All primary partitions are in use."
+msgstr "所有主要分割區是在中使用\n"
-#: libfdisk/src/sun.c:556
-#, fuzzy, c-format
-msgid "Sector %d is already allocated"
-msgstr "磁區 %d 已經被配置\n"
+#: libfdisk/src/dos.c:1976 libfdisk/src/dos.c:1988
+#, fuzzy
+msgid "All space for primary partitions is in use."
+msgstr "所有主要分割區是在中使用\n"
-#: libfdisk/src/sun.c:618
-#, fuzzy, c-format
-msgid ""
-"You haven't covered the whole disk with the 3rd partition, but your value\n"
-"%d %s covers some other partition. Your entry has been changed\n"
-"to %d %s"
+#. TRANSLATORS: Try to keep this within 80 characters.
+#: libfdisk/src/dos.c:1991
+#, fuzzy
+msgid "To create more partitions, first replace a primary with an extended partition."
msgstr ""
-"您未以第三分割區涵蓋整個磁碟，但是您設定的值\n"
-"%d %s 涵蓋某些其他的分割區。您的輸入值已變更\n"
-"為 %d %s\n"
+"如果您要建立超過四分割區，您必須置換\n"
+"主要分割與進階分割先。\n"
-#: libfdisk/src/sun.c:657
-#, fuzzy, c-format
-msgid ""
-"If you want to maintain SunOS/Solaris compatibility, consider leaving this "
-"partition as Whole disk (5), starting at 0, with %u sectors"
-msgstr ""
-"如果您要維持 SunOS/Solaris 的相容性，請考慮保持這個\n"
-"分割區為整個磁碟 (5)，開始於 0, 具備 %u 磁區\n"
+#: libfdisk/src/dos.c:2012
+#, fuzzy
+msgid "Partition type"
+msgstr "分割區編號"
-#: libfdisk/src/sun.c:684
+#: libfdisk/src/dos.c:2016
#, c-format
-msgid ""
-"Label geometry: %d rpm, %d alternate and %d physical cylinders,\n"
-" %d extra sects/cyl, interleave %d:1"
+msgid "%u primary, %d extended, %u free"
msgstr ""
-#: libfdisk/src/sun.c:691
-#, fuzzy, c-format
-msgid "Label ID: %s"
-msgstr "標籤：%.*s\n"
-
-#: libfdisk/src/sun.c:692
-#, fuzzy, c-format
-msgid "Volume ID: %s"
-msgstr "卷冊：<%-6s>\n"
+#: libfdisk/src/dos.c:2021
+#, fuzzy
+msgid "primary"
+msgstr "主要的"
-#: libfdisk/src/sun.c:693
+#: libfdisk/src/dos.c:2023
#, fuzzy
-msgid "<none>"
-msgstr "無"
+msgid "extended"
+msgstr "延伸"
-#: libfdisk/src/sun.c:701
+#: libfdisk/src/dos.c:2023
#, fuzzy
-msgid "Flag"
-msgstr "屬æ\80§æ\97\97æ¨\99"
+msgid "container for logical partitions"
+msgstr "å£\9eç\9a\84é\82\8f輯å\88\86å\89²å\8d\80"
-#: libfdisk/src/sun.c:768
-msgid "Number of alternate cylinders"
-msgstr "替代磁柱數量"
+#: libfdisk/src/dos.c:2025
+#, fuzzy
+msgid "logical"
+msgstr "邏輯的"
-#: libfdisk/src/sun.c:784
-msgid "Extra sectors per cylinder"
-msgstr "每磁柱的額外磁區"
+#: libfdisk/src/dos.c:2025
+#, fuzzy
+msgid "numbered from 5"
+msgstr " l 邏輯的 (已編號從 5)"
-#: libfdisk/src/sun.c:799
-msgid "Interleave factor"
-msgstr "交錯因子"
+#: libfdisk/src/dos.c:2064
+#, fuzzy, c-format
+msgid "Invalid partition type `%c'."
+msgstr "無效的分割區類型『%c』\n"
-#: libfdisk/src/sun.c:814
-msgid "Rotation speed (rpm)"
-msgstr "旋轉速度 (rpm)"
+#: libfdisk/src/dos.c:2082
+#, fuzzy, c-format
+msgid "Cannot write sector %jd: seek failed"
+msgstr "無法寫入指令稿檔案"
-#: libfdisk/src/sun.c:829
-msgid "Number of physical cylinders"
-msgstr "實體磁柱數量"
+#: libfdisk/src/dos.c:2242 libfdisk/src/gpt.c:1291
+#, fuzzy
+msgid "Disk identifier"
+msgstr "磁碟識別碼：0x%08x\n"
-#: libfdisk/src/sun.c:910
+#: libfdisk/src/dos.c:2357
#, fuzzy
-msgid ""
-"Consider leaving partition 3 as Whole disk (5),\n"
-"as SunOS/Solaris expects it and even Linux likes it.\n"
+msgid "Type 0 means free space to many systems. Having partitions of type 0 is probably unwise."
msgstr ""
-"考慮保留分割區 3 為整個磁碟 (5)，\n"
-"SunOS/Solaris 是如此預期．甚至 Linux 也喜歡它。\n"
-"\n"
+"類型 0 對於許多系統而言表示剩餘空間\n"
+"(並不包括 Linux)。具有\n"
+"類型為 0 的分割區可能不太明智。您可以\n"
+"使用「d」命令來刪除分割區。\n"
-#: libfdisk/src/sun.c:919
-#, fuzzy
-msgid ""
-"It is highly recommended that the partition at offset 0\n"
-"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
-"there may destroy your partition table and bootblock.\n"
-"Are you sure you want to tag the partition as Linux swap?"
+#: libfdisk/src/dos.c:2362
+msgid "Cannot change type of the extended partition which is already used by logical partitions. Delete logical partitions first."
msgstr ""
-"強烈建議位於偏移值 0 的分割區\n"
-"為 UFS、EXT2FS 檔案系統或 SunOS 交換區。將 Linux 交換區放在\n"
-"那裡也許會銷毀您的分割表和啟動區塊。\n"
-"如果您很確定想要該分割區被\n"
-"標示為 82 (Linux 交換區) 就輸入 YES："
-#: lib/pager.c:102
+#: libfdisk/src/dos.c:2684
#, fuzzy, c-format
-msgid "waitpid failed (%s)"
-msgstr "waitpid 失敗 (%s)"
-
-#: lib/path.c:199 sys-utils/lscpu.c:1252
-msgid "failed to callocate cpu set"
-msgstr "callocate cpu 集合時失敗"
+msgid "Partition %zu: no data area."
+msgstr "分割區 %d 沒有資料區域\n"
-#: lib/path.c:203
-#, fuzzy, c-format
-msgid "failed to parse CPU list %s"
-msgstr "剖析 CPU 清單 %s 時失敗"
+#: libfdisk/src/dos.c:2718
+msgid "New beginning of data"
+msgstr "新的資料開始部分"
-#: lib/path.c:206
-#, c-format
-msgid "failed to parse CPU mask %s"
-msgstr "剖析 CPU 遮罩 %s 時失敗"
+#: libfdisk/src/dos.c:2735
+msgid "The new beginning of the partition overlaps the disk label area. Be very careful when using the partition. You can lose all your partitions on the disk."
+msgstr ""
-#: login-utils/chfn.c:83 login-utils/chsh.c:72
+#: libfdisk/src/dos.c:2781
#, fuzzy, c-format
-msgid " %s [options] [username]\n"
-msgstr " %s [選項] [使用者名稱]\n"
+msgid "Partition %zu: is an extended partition."
+msgstr "警告：分割區 %d 是擴充分割區\n"
-#: login-utils/chfn.c:85
-#, fuzzy
-msgid " -f, --full-name <full-name> real name\n"
-msgstr " -f, --full-name <full-name> 真實名稱\n"
+#: libfdisk/src/dos.c:2787
+#, fuzzy, c-format
+msgid "The bootable flag on partition %zu is enabled now."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: login-utils/chfn.c:86
-#, fuzzy
-msgid " -o, --office <office> office number\n"
-msgstr " -o, --office <office> 辦公室數字\n"
+#: libfdisk/src/dos.c:2788
+#, fuzzy, c-format
+msgid "The bootable flag on partition %zu is disabled now."
+msgstr "切換目前分割區的屬性旗標"
-#: login-utils/chfn.c:87
-#, fuzzy
-msgid " -p, --office-phone <phone> office phone number\n"
-msgstr " -p, --office-phone <phone> 辦公室電話號碼\n"
+#: libfdisk/src/dos.c:2801 libfdisk/src/gpt.c:3243 libfdisk/src/sgi.c:1158
+#: libfdisk/src/sun.c:1129
+msgid "Device"
+msgstr "所用裝置"
-#: login-utils/chfn.c:88
-#, fuzzy
-msgid " -h, --home-phone <phone> home phone number\n"
-msgstr " -h, --home-phone <phone> 個人資料夾電話號碼\n"
+#: libfdisk/src/dos.c:2802 libfdisk/src/sun.c:40
+msgid "Boot"
+msgstr "可開機"
-#: login-utils/chfn.c:90 login-utils/chsh.c:77
-#, fuzzy
-msgid " -u, --help display this help and exit\n"
-msgstr " -u, --help 顯示這份說明然後離開\n"
+#: libfdisk/src/dos.c:2808 libfdisk/src/sgi.c:1164 libfdisk/src/sun.c:1135
+msgid "Id"
+msgstr ""
-#: login-utils/chfn.c:91 login-utils/chsh.c:78
-#, fuzzy
-msgid " -v, --version output version information and exit\n"
-msgstr " -v, --version 輸出版本資訊然後離開\n"
+#: libfdisk/src/dos.c:2812
+msgid "Start-C/H/S"
+msgstr ""
-#: login-utils/chfn.c:127 login-utils/chsh.c:104
-#, fuzzy, c-format
-msgid "you (user %d) don't exist."
-msgstr "您 (使用者 %d) 不存在。"
+#: libfdisk/src/dos.c:2813
+msgid "End-C/H/S"
+msgstr ""
-#: login-utils/chfn.c:132 login-utils/chsh.c:109 login-utils/libuser.c:59
-#, fuzzy, c-format
-msgid "user \"%s\" does not exist."
-msgstr "使用者「%s」不存在。"
+#: libfdisk/src/dos.c:2814 libfdisk/src/gpt.c:3253 libfdisk/src/sgi.c:1166
+msgid "Attrs"
+msgstr ""
-#: login-utils/chfn.c:138
+#: libfdisk/src/gpt.c:691
#, fuzzy
-msgid "can only change local entries"
-msgstr "只能變更本地條目"
+msgid "failed to allocate GPT header"
+msgstr "配置迭代器時失敗"
-#: login-utils/chfn.c:149
-#, fuzzy, c-format
-msgid "%s is not authorized to change the finger info of %s"
-msgstr "%s 未被授權到變更手指資訊的 %s"
+#: libfdisk/src/gpt.c:800
+msgid "First LBA specified by script is out of range."
+msgstr ""
-#: login-utils/chfn.c:151 login-utils/chsh.c:129
-msgid "Unknown user context"
-msgstr "不明的使用者相關環境"
+#: libfdisk/src/gpt.c:812
+msgid "Last LBA specified by script is out of range."
+msgstr ""
-#: login-utils/chfn.c:157 login-utils/chsh.c:135
-#, fuzzy, c-format
-msgid "can't set default context for %s"
-msgstr "無法設定預設語境用於 %s"
+#: libfdisk/src/gpt.c:953
+#, c-format
+msgid "GPT PMBR size mismatch (%<PRIu64> != %<PRIu64>) will be corrected by write."
+msgstr ""
-#: login-utils/chfn.c:168
+#: libfdisk/src/gpt.c:978
#, fuzzy
-msgid "running UID doesn't match UID of user we're altering, change denied"
-msgstr "執行中 UID 不匹配 UID 的使用者我們正在改變，命令殼變更拒絕"
+msgid "gpt: stat() failed"
+msgstr "%s：stat 失敗"
-#: login-utils/chfn.c:172
+#: libfdisk/src/gpt.c:988
#, c-format
-msgid "Changing finger information for %s.\n"
-msgstr "修改 %s 的 finger 資訊。\n"
+msgid "gpt: cannot handle files with mode %o"
+msgstr ""
-#: login-utils/chfn.c:184
-#, c-format
-msgid "Finger information not changed.\n"
-msgstr "Finger 資訊沒有變更。\n"
+#: libfdisk/src/gpt.c:1248
+msgid "GPT Header"
+msgstr ""
-#: login-utils/chfn.c:239 login-utils/chfn.c:316
-msgid "Office"
-msgstr "辦公室"
+#: libfdisk/src/gpt.c:1253
+msgid "GPT Entries"
+msgstr ""
-#: login-utils/chfn.c:243 login-utils/chfn.c:317
-msgid "Office Phone"
-msgstr "辦公室電話"
+#: libfdisk/src/gpt.c:1259
+msgid "GPT Backup Entries"
+msgstr ""
-#: login-utils/chfn.c:247 login-utils/chfn.c:318
-msgid "Home Phone"
-msgstr "住家電話"
+#: libfdisk/src/gpt.c:1265
+msgid "GPT Backup Header"
+msgstr ""
-#: login-utils/chfn.c:338 login-utils/chsh.c:260
+#: libfdisk/src/gpt.c:1298
#, fuzzy
-msgid "Aborted."
-msgstr "放棄。"
-
-#: login-utils/chfn.c:370
-#, fuzzy, c-format
-msgid "field %s is too long"
-msgstr "欄位 %s 太長"
+msgid "First usable LBA"
+msgstr "起初 %s"
-#: login-utils/chfn.c:372
+#: libfdisk/src/gpt.c:1303
#, fuzzy
-msgid "field is too long"
-msgstr "欄位太長"
+msgid "Last usable LBA"
+msgstr " 最後一筆 %s"
-#: login-utils/chfn.c:380
-#, fuzzy, c-format
-msgid "%s: '%c' is not allowed"
-msgstr "%s：『%c』未被允許"
+#. TRANSLATORS: The LBA (Logical Block Address) of the backup GPT header.
+#: libfdisk/src/gpt.c:1309
+msgid "Alternative LBA"
+msgstr ""
-#: login-utils/chfn.c:382 login-utils/chsh.c:304
-#, fuzzy, c-format
-msgid "'%c' is not allowed"
-msgstr "『%c』未被允許"
+#. TRANSLATORS: The start of the array of partition entries.
+#: libfdisk/src/gpt.c:1315
+#, fuzzy
+msgid "Partition entries starting LBA"
+msgstr "分割區 (a-%c)："
-#: login-utils/chfn.c:388
-#, fuzzy, c-format
-msgid "%s: control characters are not allowed"
-msgstr "%s：控制字元未被允許"
+#. TRANSLATORS: The end of the array of partition entries.
+#: libfdisk/src/gpt.c:1321
+#, fuzzy
+msgid "Partition entries ending LBA"
+msgstr "分割區 (a-%c)："
-#: login-utils/chfn.c:391 login-utils/chsh.c:308
+#: libfdisk/src/gpt.c:1328
#, fuzzy
-msgid "control characters are not allowed"
-msgstr "控制字元未被允許"
+msgid "Allocated partition entries"
+msgstr "已選分割區 %d\n"
-#: login-utils/chfn.c:473
-#, c-format
-msgid "Finger information *NOT* changed. Try again later.\n"
-msgstr "Finger 資訊 *未被* 變更。請稍後再嘗試。\n"
+#: libfdisk/src/gpt.c:1670
+msgid "The backup GPT table is corrupt, but the primary appears OK, so that will be used."
+msgstr ""
-#: login-utils/chfn.c:476
-#, c-format
-msgid "Finger information changed.\n"
-msgstr "Finger 資訊已變更。\n"
+#: libfdisk/src/gpt.c:1680
+msgid "The primary GPT table is corrupt, but the backup appears OK, so that will be used."
+msgstr ""
-#: login-utils/chsh.c:74
-#, fuzzy
-msgid " -s, --shell <shell> specify login shell\n"
-msgstr " -s, --shell <shell> 指定登入命令殼\n"
+#: libfdisk/src/gpt.c:1696
+msgid "The backup GPT table is not on the end of the device."
+msgstr ""
-#: login-utils/chsh.c:75
-#, fuzzy
-msgid " -l, --list-shells print list of shells and exit\n"
-msgstr " -l, --list-shells 列印命令殼清單的然後離開\n"
+#: libfdisk/src/gpt.c:1699
+msgid "The backup GPT table is not on the end of the device. This problem will be corrected by write."
+msgstr ""
-#: login-utils/chsh.c:115
+#: libfdisk/src/gpt.c:1703
#, fuzzy
-msgid "can only change local entries."
-msgstr "å\8fªè\83½è®\8aæ\9b´æ\9c¬å\9c°æ¢\9dç\9b®ã\80\82"
+msgid "Failed to recalculate backup GPT table location"
+msgstr "å\88\9då§\8bå\8c\96輸å\87ºè¡¨æ ¼æ\99\82失æ\95\97"
-#: login-utils/chsh.c:128
+#: libfdisk/src/gpt.c:1858
#, fuzzy, c-format
-msgid "%s is not authorized to change the shell of %s"
-msgstr "%s 未被授權到變更命令殼的 %s"
-
-#: login-utils/chsh.c:152
-#, fuzzy
-msgid ""
-"running UID doesn't match UID of user we're altering, shell change denied"
-msgstr "執行中 UID 不匹配 UID 的使用者我們正在改變，命令殼變更拒絕"
+msgid "unsupported GPT attribute bit '%s'"
+msgstr "不受支援的引數：%s"
-#: login-utils/chsh.c:157
+#: libfdisk/src/gpt.c:1863
#, fuzzy, c-format
-msgid "your shell is not in %s, shell change denied"
-msgstr "您的命令殼不是在中 %s，命令殼變更拒絕"
-
-#: login-utils/chsh.c:163
-#, c-format
-msgid "Changing shell for %s.\n"
-msgstr "變更 %s 的 shell。\n"
+msgid "failed to parse GPT attribute string '%s'"
+msgstr "剖析清單『%s 時失敗』"
-#: login-utils/chsh.c:171
-msgid "New shell"
-msgstr "新命令殼"
+#: libfdisk/src/gpt.c:1963
+#, fuzzy, c-format
+msgid "Partition UUID changed from %s to %s."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/chsh.c:180
+#: libfdisk/src/gpt.c:1972
#, fuzzy
-msgid "Shell not changed."
-msgstr "å\91½ä»¤æ®¼ç\84¡æ³\95è®\8aæ\9b´ã\80\82"
+msgid "Failed to translate partition name, name not changed."
+msgstr "å\8a å\85¥å\88\86å\89²æ\99\82失æ\95\97"
-#: login-utils/chsh.c:185
-#, fuzzy
-msgid "Shell *NOT* changed. Try again later."
-msgstr ""
-"setpwnam 失敗\n"
-"命令殼 * 無法 * 變更。 稍後再試一次。"
+#: libfdisk/src/gpt.c:1974
+#, fuzzy, c-format
+msgid "Partition name changed from '%s' to '%.*s'."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/chsh.c:189
+#: libfdisk/src/gpt.c:2003
#, fuzzy
-msgid ""
-"setpwnam failed\n"
-"Shell *NOT* changed. Try again later."
+msgid "The start of the partition understeps FirstUsableLBA."
msgstr ""
-"setpwnam 失敗\n"
-"命令殼 * 無法 * 變更。 稍後再試一次。"
-
-#: login-utils/chsh.c:193
-#, c-format
-msgid "Shell changed.\n"
-msgstr "shell 已變更。\n"
+"\n"
+"開機分割區不存在。\n"
-#: login-utils/chsh.c:289
+#: libfdisk/src/gpt.c:2010
#, fuzzy
-msgid "shell must be a full path name"
-msgstr "命令殼必須是完整路徑名稱"
+msgid "The end of the partition oversteps LastUsableLBA."
+msgstr "結束的分割在中磁區"
-#: login-utils/chsh.c:293
-#, fuzzy, c-format
-msgid "\"%s\" does not exist"
-msgstr "「%s」不存在"
+#: libfdisk/src/gpt.c:2203
+msgid "The device contains hybrid MBR -- writing GPT only."
+msgstr ""
-#: login-utils/chsh.c:297
-#, fuzzy, c-format
-msgid "\"%s\" is not executable"
-msgstr "「%s」不是可執行檔案"
+#: libfdisk/src/gpt.c:2239
+msgid "Disk does not contain a valid backup header."
+msgstr ""
-#: login-utils/chsh.c:316
-#, fuzzy, c-format
-msgid "Warning: \"%s\" is not listed in %s."
-msgstr "警告：「%s」未被清單在中 %s。"
+#: libfdisk/src/gpt.c:2244
+msgid "Invalid primary header CRC checksum."
+msgstr ""
-#: login-utils/chsh.c:320 login-utils/chsh.c:326
-#, fuzzy, c-format
-msgid ""
-"\"%s\" is not listed in %s.\n"
-"Use %s -l to see list."
+#: libfdisk/src/gpt.c:2248
+msgid "Invalid backup header CRC checksum."
msgstr ""
-"「%s」未被清單在中 %s。\n"
-"使用 %s -l 到參看清單。"
-#: login-utils/chsh.c:350
+#: libfdisk/src/gpt.c:2253
#, fuzzy
-msgid "No known shells."
-msgstr "沒有已知命令殼。"
+msgid "Invalid partition entry checksum."
+msgstr "無效的分割區類型『%c』\n"
-#: login-utils/islocal.c:99
-#, fuzzy, c-format
-msgid "Usage: %s <passwordfile> <username>...\n"
-msgstr "用法：%s [選項] [檔案...]\n"
-
-#: login-utils/last.c:154 sys-utils/dmesg.c:1170
-#, fuzzy, c-format
-msgid "unknown time format: %s"
-msgstr "不明動作：%s"
-
-#: login-utils/last.c:262 login-utils/last.c:270
-#, fuzzy, c-format
-msgid "Interrupted %s"
+#: libfdisk/src/gpt.c:2258
+msgid "Invalid primary header LBA sanity checks."
msgstr ""
-"\n"
-"發生插斷 %10.10s %5.5s\n"
-#: login-utils/last.c:425
-msgid "preallocation size exceeded"
+#: libfdisk/src/gpt.c:2262
+msgid "Invalid backup header LBA sanity checks."
msgstr ""
-#: login-utils/last.c:547
-#, fuzzy, c-format
-msgid " %s [options] [<username>...] [<tty>...]\n"
-msgstr " %s [選項] <user> [<ttyname>]\n"
+#: libfdisk/src/gpt.c:2267
+msgid "MyLBA mismatch with real position at primary header."
+msgstr ""
-#: login-utils/last.c:550
-msgid " -<number> how many lines to show\n"
+#: libfdisk/src/gpt.c:2271
+msgid "MyLBA mismatch with real position at backup header."
msgstr ""
-#: login-utils/last.c:551
-msgid " -a, --hostlast display hostnames in the last column\n"
+#: libfdisk/src/gpt.c:2276
+msgid "Disk is too small to hold all data."
msgstr ""
-#: login-utils/last.c:552
-msgid " -d, --dns translate the IP number back into a hostname\n"
+#: libfdisk/src/gpt.c:2286
+msgid "Primary and backup header mismatch."
msgstr ""
-#: login-utils/last.c:554
+#: libfdisk/src/gpt.c:2292
#, fuzzy, c-format
-msgid " -f, --file <file> use a specific file instead of %s\n"
-msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+msgid "Partition %u overlaps with partition %u."
+msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
-#: login-utils/last.c:555
-msgid " -F, --fulltimes print full login and logout times and dates\n"
-msgstr ""
+#: libfdisk/src/gpt.c:2299
+#, fuzzy, c-format
+msgid "Partition %u is too big for the disk."
+msgstr "分割重疊在之上磁碟。\n"
-#: login-utils/last.c:556
-#, fuzzy
-msgid " -i, --ip display IP numbers in numbers-and-dots notation\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#: libfdisk/src/gpt.c:2306
+#, fuzzy, c-format
+msgid "Partition %u ends before it starts."
+msgstr "分割區結尾小於磁區 0"
-#: login-utils/last.c:557
-msgid " -n, --limit <number> how many lines to show\n"
-msgstr ""
+#: libfdisk/src/gpt.c:2316
+#, fuzzy, c-format
+msgid "Header version: %s"
+msgstr "剖析錯誤：%s"
-#: login-utils/last.c:558
-#, fuzzy
-msgid " -R, --nohostname don't display the hostname field\n"
-msgstr " -q, --stats 顯示統計關於 tty\n"
+#: libfdisk/src/gpt.c:2317
+#, fuzzy, c-format
+msgid "Using %zu out of %zu partitions."
+msgstr "怪異的，只有 %d 分割區定義。"
-#: login-utils/last.c:559
+#: libfdisk/src/gpt.c:2327
+#, fuzzy, c-format
+msgid "A total of %ju free sectors is available in %u segment."
+msgid_plural "A total of %ju free sectors is available in %u segments (the largest is %s)."
+msgstr[0] "沒有可用的磁區存在\n"
+
+#: libfdisk/src/gpt.c:2414
#, fuzzy
-msgid " -s, --since <time> display the lines since the specified time\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+msgid "All partitions are already in use."
+msgstr "這個分割區已在使用中"
-#: login-utils/last.c:560
+#: libfdisk/src/gpt.c:2465
#, fuzzy
-msgid " -t, --until <time> display the lines until the specified time\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+msgid "No enough free sectors available."
+msgstr "沒有可用的磁區存在\n"
-#: login-utils/last.c:561
-msgid " -p, --present <time> display who where present at the specified time\n"
-msgstr ""
+#: libfdisk/src/gpt.c:2479 libfdisk/src/gpt.c:2506
+#, fuzzy, c-format
+msgid "Sector %ju already used."
+msgstr "磁區 %llu 已經配置\n"
-#: login-utils/last.c:562
-#, fuzzy
-msgid " -w, --fullnames display full user and domain names\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#: libfdisk/src/gpt.c:2580
+#, fuzzy, c-format
+msgid "Could not create partition %zu"
+msgstr "不要新增一個分割區"
-#: login-utils/last.c:563
-msgid ""
-" -x, --system display system shutdown entries and run level changes\n"
+#: libfdisk/src/gpt.c:2587
+#, c-format
+msgid "The last usable GPT sector is %ju, but %ju is requested."
msgstr ""
-#: login-utils/last.c:564
-msgid " --time-format <format> show time stamp using format:\n"
+#: libfdisk/src/gpt.c:2594
+#, c-format
+msgid "The first usable GPT sector is %ju, but %ju is requested."
msgstr ""
-#: login-utils/last.c:565
-#, fuzzy
-msgid " [notime|short|full|iso]\n"
-msgstr " 「%s」)\n"
+#: libfdisk/src/gpt.c:2733
+#, fuzzy, c-format
+msgid "Created a new GPT disklabel (GUID: %s)."
+msgstr "建立新的清空 Sun disklabel"
-#: login-utils/last.c:820
+#: libfdisk/src/gpt.c:2736
#, fuzzy, c-format
-msgid ""
-"\n"
-"%s begins %s"
+msgid "The maximal number of partitions is %zu (default is %zu)."
+msgstr "已建立分割區的最大數量\n"
+
+#: libfdisk/src/gpt.c:2758
+msgid "Enter new disk UUID (in 8-4-4-4-12 format)"
msgstr ""
-"\n"
-"wtmp 開始 %s"
-#: login-utils/last.c:890
+#: libfdisk/src/gpt.c:2766
#, fuzzy
-msgid "failed to parse number"
-msgstr "剖析列號的時失敗"
+msgid "Failed to parse your UUID."
+msgstr "剖析 %s 時失敗"
-#: login-utils/last.c:912 login-utils/last.c:917 login-utils/last.c:922
+#: libfdisk/src/gpt.c:2780
#, fuzzy, c-format
-msgid "invalid time value \"%s\""
-msgstr "無效的逾時引數"
+msgid "Disk identifier changed from %s to %s."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/last-deprecated.c:155
-msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
-msgstr "用法：last [-#] [-f file] [-t tty] [-h hostname] [user…]\n"
+#: libfdisk/src/gpt.c:2800
+#, fuzzy
+msgid "Not enough space for new partition table!"
+msgstr "沒有可用的磁區存在\n"
-#: login-utils/last-deprecated.c:252
+#: libfdisk/src/gpt.c:2811
#, fuzzy, c-format
-msgid "%s: mmap failed"
-msgstr "%s：mmap 失敗"
-
-#: login-utils/last-deprecated.c:312
-msgid " still logged in"
-msgstr " 仍然在登入狀態"
+msgid "Partition #%zu out of range (minimal start is %<PRIu64> sectors)"
+msgstr "分割區 %s 具有無效的開始磁區 0。\n"
-#: login-utils/last-deprecated.c:334
+#: libfdisk/src/gpt.c:2816
#, c-format
-msgid ""
-"\n"
-"wtmp begins %s"
+msgid "Partition #%zu out of range (maximal end is %<PRIu64> sectors)"
msgstr ""
-"\n"
-"wtmp 開始 %s"
-#: login-utils/last-deprecated.c:433
+#: libfdisk/src/gpt.c:2862
#, fuzzy
-msgid "gethostname failed"
-msgstr "gethostname 失敗"
-
-#: login-utils/last-deprecated.c:479
-#, c-format
-msgid ""
-"\n"
-"interrupted %10.10s %5.5s \n"
+msgid "The partition entry size is zero."
msgstr ""
"\n"
-"發生插斷 %10.10s %5.5s\n"
-
-#: login-utils/libuser.c:29 login-utils/libuser.c:31
-msgid "Couldn't drop group privileges"
-msgstr ""
+"開機分割區不存在。\n"
-#: login-utils/libuser.c:47
+#: libfdisk/src/gpt.c:2864
#, fuzzy, c-format
-msgid "libuser initialization failed: %s."
-msgstr "群組初始化失敗：%m"
+msgid "The number of the partition has to be smaller than %zu."
+msgstr "已建立分割區的最大數量\n"
-#: login-utils/libuser.c:52
+#: libfdisk/src/gpt.c:2888
#, fuzzy
-msgid "changing user attribute failed"
-msgstr "變更 %s 模式失敗"
-
-#: login-utils/libuser.c:66
-#, c-format
-msgid "user attribute not changed: %s"
-msgstr ""
-
-#. TRANSLATORS: The standard value for %u is 60.
-#: login-utils/login.c:177
-#, fuzzy, c-format
-msgid "timed out after %u seconds"
-msgstr "已逾時之後 %u 秒"
-
-#: login-utils/login.c:285
-#, fuzzy, c-format
-msgid "FATAL: can't reopen tty: %m"
-msgstr "嚴重：無法重新開啟 tty：%m"
-
-#: login-utils/login.c:291
-#, c-format
-msgid "FATAL: %s is not a terminal"
-msgstr "嚴重：%s 並非終端機"
+msgid "Cannot allocate memory!"
+msgstr "配置記憶體時失敗：%m"
-#: login-utils/login.c:309
+#: libfdisk/src/gpt.c:2917
#, fuzzy, c-format
-msgid "chown (%s, %lu, %lu) failed: %m"
-msgstr "chown (%s，%lu，%lu) 失敗：%m"
+msgid "Partition table length changed from %<PRIu32> to %<PRIu32>."
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: login-utils/login.c:313
+#: libfdisk/src/gpt.c:3027
#, fuzzy, c-format
-msgid "chmod (%s, %u) failed: %m"
-msgstr "chmod (%s，%u) 失敗：%m"
+msgid "The attributes on partition %zu changed to 0x%016<PRIx64>."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
-#: login-utils/login.c:374
-msgid "FATAL: bad tty"
-msgstr "嚴重：不當的 tty"
+#: libfdisk/src/gpt.c:3077
+msgid "Enter GUID specific bit"
+msgstr ""
-#: login-utils/login.c:392
+#: libfdisk/src/gpt.c:3092
#, fuzzy, c-format
-msgid "FATAL: %s: change permissions failed: %m"
-msgstr "嚴重：%s：變更權限失敗：%m"
+msgid "failed to toggle unsupported bit %lu"
+msgstr "掛載移動 %s 到 %s 時失敗"
-#: login-utils/login.c:520
+#: libfdisk/src/gpt.c:3105
#, c-format
-msgid "Last login: %.*s "
-msgstr "上次登入：%.*s "
+msgid "The GUID specific bit %d on partition %zu is enabled now."
+msgstr ""
-#: login-utils/login.c:522
+#: libfdisk/src/gpt.c:3106
#, c-format
-msgid "from %.*s\n"
-msgstr "從 %.*s\n"
+msgid "The GUID specific bit %d on partition %zu is disabled now."
+msgstr ""
-#: login-utils/login.c:525
-#, c-format
-msgid "on %.*s\n"
-msgstr "於 %.*s\n"
+#: libfdisk/src/gpt.c:3110
+#, fuzzy, c-format
+msgid "The %s flag on partition %zu is enabled now."
+msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n"
+
+#: libfdisk/src/gpt.c:3111
+#, fuzzy, c-format
+msgid "The %s flag on partition %zu is disabled now."
+msgstr "這個分割區無法使用"
-#: login-utils/login.c:543
+#: libfdisk/src/gpt.c:3250
#, fuzzy
-msgid "write lastlog failed"
-msgstr "寫入 lastlog 失敗"
+msgid "Type-UUID"
+msgstr "類型"
-#: login-utils/login.c:640
-#, c-format
-msgid "DIALUP AT %s BY %s"
-msgstr "由 %2$s 於 %1$s 撥號進入"
+#: libfdisk/src/gpt.c:3251
+msgid "UUID"
+msgstr ""
-#: login-utils/login.c:645
-#, c-format
-msgid "ROOT LOGIN ON %s FROM %s"
-msgstr "å¾\9e %2$s æ\96¼ %1$s ç\99»å\85¥ç\82ºç³»çµ±ç®¡ç\90\86å\93¡"
+#: libfdisk/src/gpt.c:3252 login-utils/chfn.c:151 login-utils/chfn.c:153
+#: login-utils/chfn.c:316
+msgid "Name"
+msgstr "å\90\8d稱"
-#: login-utils/login.c:648
-#, c-format
-msgid "ROOT LOGIN ON %s"
-msgstr "系統管ç\90\86å\93¡æ\96¼ %s ç\99»å\85¥"
+#: libfdisk/src/label.c:597
+#, fuzzy
+msgid "Partitions order fixed."
+msgstr "ç\84¡å·²å®\9a義å\88\86å\89²å\8d\80\n"
-#: login-utils/login.c:651
-#, c-format
-msgid "LOGIN ON %s BY %s FROM %s"
-msgstr "由 %2$s 從 %3$s 於 %1$s 登入"
+#: libfdisk/src/label.c:600
+#, fuzzy
+msgid "Nothing to do. Ordering is correct already."
+msgstr ""
+"無事可做。順序已經是正確的。\n"
+"\n"
-#: login-utils/login.c:654
-#, c-format
-msgid "LOGIN ON %s BY %s"
-msgstr "由 %2$s 於 %1$s 登入"
+#: libfdisk/src/label.c:603
+#, fuzzy
+msgid "Failed to fix partitions order."
+msgstr "修正分割排序"
-#: login-utils/login.c:715
-msgid "login: "
-msgstr "登入："
+#: libfdisk/src/partition.c:871
+#, fuzzy
+msgid "Free space"
+msgstr "剩餘空間"
-#: login-utils/login.c:741
+#: libfdisk/src/partition.c:1365
#, fuzzy, c-format
-msgid "PAM failure, aborting: %s"
-msgstr "PAM 失敗，放棄：%s"
-
-#: login-utils/login.c:742
-#, c-format
-msgid "Couldn't initialize PAM: %s"
-msgstr "無法初始化 PAM：%s"
+msgid "Failed to resize partition #%zu."
+msgstr "調整大小分割時失敗"
-#: login-utils/login.c:813
-#, fuzzy, c-format
-msgid "FAILED LOGIN %u FROM %s FOR %s, %s"
-msgstr "失敗的登入 %u 從 %s 用於 %s，%s"
+#: libfdisk/src/parttype.c:291 misc-utils/findmnt.c:753
+#: misc-utils/uuidparse.c:199 misc-utils/uuidparse.c:217 schedutils/chrt.c:127
+#: schedutils/ionice.c:81 sys-utils/hwclock.c:286
+msgid "unknown"
+msgstr "不明的"
-#: login-utils/login.c:821 login-utils/sulogin.c:957
-#, c-format
-msgid ""
-"Login incorrect\n"
-"\n"
+#: libfdisk/src/script.c:820
+msgid "The script and device sector size differ; the sizes will be recalculated to match the device."
msgstr ""
-"登入不正確\n"
-"\n"
-#: login-utils/login.c:836
-#, fuzzy, c-format
-msgid "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"
-msgstr "太多登入嘗試 (%u) 從 %s 用於 %s，%s"
-
-#: login-utils/login.c:842
-#, c-format
-msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
-msgstr "失敗的登入執行階段自 %s 用於 %s, %s"
-
-#: login-utils/login.c:850
-#, c-format
-msgid ""
-"\n"
-"Login incorrect\n"
+#: libfdisk/src/script.c:1037
+msgid "Can't recalculate partition start to the device sectors"
msgstr ""
-"\n"
-"登入錯誤\n"
-#: login-utils/login.c:878 login-utils/login.c:1331 login-utils/login.c:1354
-#, fuzzy
-msgid ""
-"\n"
-"Session setup problem, abort."
+#: libfdisk/src/script.c:1095
+msgid "Can't recalculate partition size to the device sectors"
msgstr ""
-"\n"
-"作業階段設定問題，放棄。"
-#: login-utils/login.c:879
-#, c-format
-msgid "NULL user name in %s:%d. Abort."
-msgstr "在 %s:%d 中包含空使用者名稱，放棄。"
+#: libfdisk/src/script.c:1554
+msgid "Ignore \"first-lba\" header due to sector size mismatch."
+msgstr ""
-#: login-utils/login.c:1030
-msgid "hush login status: restore original IDs failed"
+#: libfdisk/src/script.c:1558
+msgid "Ignore \"last-lba\" header due to sector size mismatch."
msgstr ""
-#: login-utils/login.c:1134
-#, c-format
-msgid "TIOCSCTTY failed: %m"
-msgstr "TIOCSCTTY 失敗：%m"
+#: libfdisk/src/sgi.c:46
+msgid "SGI volhdr"
+msgstr "SGI volhdr"
-#: login-utils/login.c:1275
-#, fuzzy, c-format
-msgid "login: -h is for superuser only\n"
-msgstr "login：-h 只提供系統管理者使用。\n"
+#: libfdisk/src/sgi.c:47
+msgid "SGI trkrepl"
+msgstr "SGI trkrepl"
-#: login-utils/login.c:1290
-#, fuzzy, c-format
-msgid "Usage: login [-p] [-h <host>] [-H] [[-f] <username>]\n"
-msgstr "用法：登入 [-p] [-h 主機] [-H] [-f 使用者名稱|使用者名稱]\n"
+#: libfdisk/src/sgi.c:48
+msgid "SGI secrepl"
+msgstr "SGI secrepl"
-#: login-utils/login.c:1332
-#, c-format
-msgid "Invalid user name \"%s\" in %s:%d. Abort."
-msgstr "無效的使用者名稱「%s」於 %s:%d，放棄。"
+#: libfdisk/src/sgi.c:49
+msgid "SGI raw"
+msgstr "SGI raw"
-#: login-utils/login.c:1353
-#, fuzzy, c-format
-msgid "groups initialization failed: %m"
-msgstr "群組初始化失敗：%m"
-
-#: login-utils/login.c:1378
-#, fuzzy
-msgid "setgid() failed"
-msgstr "setgid() 失敗"
-
-#: login-utils/login.c:1408
-#, c-format
-msgid "You have new mail.\n"
-msgstr "您有新郵件。\n"
+#: libfdisk/src/sgi.c:50
+msgid "SGI bsd"
+msgstr "SGI bsd"
-#: login-utils/login.c:1410
-#, c-format
-msgid "You have mail.\n"
-msgstr "您有郵件。\n"
+#: libfdisk/src/sgi.c:51
+msgid "SGI sysv"
+msgstr "SGI sysv"
-#: login-utils/login.c:1424
-msgid "setuid() failed"
-msgstr "setuid() 失敗"
+#: libfdisk/src/sgi.c:52
+msgid "SGI volume"
+msgstr "SGI volume"
-#: login-utils/login.c:1430 login-utils/sulogin.c:679
-#, fuzzy, c-format
-msgid "%s: change directory failed"
-msgstr "%s：變更目錄失敗"
+#: libfdisk/src/sgi.c:53
+msgid "SGI efs"
+msgstr "SGI efs"
-#: login-utils/login.c:1437 login-utils/sulogin.c:680
-#, c-format
-msgid "Logging in with home = \"/\".\n"
-msgstr "登入時個人資料夾=「/」。\n"
+#: libfdisk/src/sgi.c:54
+msgid "SGI lvol"
+msgstr "SGI lvol"
-#: login-utils/login.c:1466
-#, fuzzy
-msgid "couldn't exec shell script"
-msgstr "無法 exec 命令稿"
+#: libfdisk/src/sgi.c:55
+msgid "SGI rlvol"
+msgstr "SGI rlvol"
-#: login-utils/login.c:1468
-#, fuzzy
-msgid "no shell"
-msgstr "沒有命令殼"
+#: libfdisk/src/sgi.c:56
+msgid "SGI xfs"
+msgstr "SGI xfs"
-#: login-utils/logindefs.c:203
-#, fuzzy, c-format
-msgid "%s: %s contains invalid numerical value: %s"
-msgstr "%s：%s 含有無效的數值：%s"
+#: libfdisk/src/sgi.c:57
+msgid "SGI xfslog"
+msgstr "SGI xfslog"
-#: login-utils/newgrp.c:102
-msgid "Password: "
-msgstr "密碼："
+#: libfdisk/src/sgi.c:58
+msgid "SGI xlv"
+msgstr "SGI xlv"
-#: login-utils/newgrp.c:106
-#, fuzzy
-msgid "crypt() failed"
-msgstr "意見調查() 失敗"
+#: libfdisk/src/sgi.c:59
+msgid "SGI xvm"
+msgstr "SGI xvm"
-#: login-utils/newgrp.c:118
-#, fuzzy, c-format
-msgid " %s <group>\n"
-msgstr " %s <group>\n"
+#: libfdisk/src/sgi.c:61 libfdisk/src/sun.c:52
+msgid "Linux native"
+msgstr "Linux native"
-#: login-utils/newgrp.c:155
-#, fuzzy
-msgid "who are you?"
-msgstr "誰是您？"
+#: libfdisk/src/sgi.c:158
+msgid "SGI info created on second sector."
+msgstr ""
-#: login-utils/newgrp.c:162 login-utils/newgrp.c:174 sys-utils/nsenter.c:334
+#: libfdisk/src/sgi.c:258
#, fuzzy
-msgid "setgid failed"
-msgstr "setgid 失敗"
+msgid "Detected an SGI disklabel with wrong checksum."
+msgstr "偵測到 sgi 磁碟標籤與錯誤的總和檢查碼。\n"
-#: login-utils/newgrp.c:167 login-utils/newgrp.c:170
+#: libfdisk/src/sgi.c:281 libfdisk/src/sun.c:793
#, fuzzy
-msgid "no such group"
-msgstr "沒有此類群組"
+msgid "Physical cylinders"
+msgstr "實體磁柱數量"
-#: login-utils/newgrp.c:176 sys-utils/mount.c:476
+#: libfdisk/src/sgi.c:286 libfdisk/src/sun.c:798
#, fuzzy
-msgid "permission denied"
-msgstr "æ¬\8aé\99\90被æ\8b\92"
+msgid "Extra sects/cyl"
+msgstr "æ¯\8fç£\81æ\9f±ç\9a\84é¡\8då¤\96ç£\81å\8d\80"
-#: login-utils/newgrp.c:181 sys-utils/nsenter.c:332
+#: libfdisk/src/sgi.c:296
#, fuzzy
-msgid "setuid failed"
-msgstr "setuid 失敗"
-
-#: login-utils/su-common.c:285
-#, fuzzy, c-format
-msgid "cannot open session: %s"
-msgstr "無法無法開啟作業階段：%s"
+msgid "Bootfile"
+msgstr "檔案 %s"
-#: login-utils/su-common.c:295
+#: libfdisk/src/sgi.c:394
#, fuzzy
-msgid "cannot create child process"
-msgstr "無法建立子行程"
+msgid "Invalid bootfile! The bootfile must be an absolute non-zero pathname, e.g. \"/unix\" or \"/unix.save\"."
+msgstr ""
+"\n"
+"無效的開機檔案！\n"
+"\t開機檔案名稱必須是絕對且非零路徑，\n"
+"\t例如「/unix」或「/unix.save」。\n"
-#: login-utils/su-common.c:307
+#: libfdisk/src/sgi.c:402
#, fuzzy, c-format
-msgid "cannot change directory to %s"
-msgstr "無法變更目錄到 %s"
+msgid "Name of bootfile is too long: %zu byte maximum."
+msgid_plural "Name of bootfile is too long: %zu bytes maximum."
+msgstr[0] ""
+"\n"
+"\t開機檔案的名稱太長：最大為 16 位元組。\n"
-#: login-utils/su-common.c:312
+#: libfdisk/src/sgi.c:411
#, fuzzy
-msgid "cannot block signals"
-msgstr "無法區塊信號"
+msgid "Bootfile must have a fully qualified pathname."
+msgstr ""
+"\n"
+"\t開機檔案必須有完全合法的路徑名稱。\n"
-#: login-utils/su-common.c:326 login-utils/su-common.c:334
-#: login-utils/su-common.c:340 sys-utils/cytune.c:170
+#: libfdisk/src/sgi.c:417
#, fuzzy
-msgid "cannot set signal handler"
-msgstr "無法設定信號處理程式"
-
-#: login-utils/su-common.c:366
-#, c-format
-msgid "%s (core dumped)\n"
+msgid "Be aware that the bootfile is not checked for existence. SGI's default is \"/unix\", and for backup \"/unix.save\"."
msgstr ""
+"\n"
+"\t要知道，開機檔案並未檢查是否存在。\n"
+"\tSGI 預設為「/unix」和用於備份的「/unix.save」。\n"
-#: login-utils/su-common.c:382
+#: libfdisk/src/sgi.c:442
#, fuzzy, c-format
-msgid ""
-"\n"
-"Session terminated, killing shell..."
+msgid "The current boot file is: %s"
msgstr ""
"\n"
-"作業階段終止，killing 命令殼…"
+"目前的啟動檔案為：%s\n"
-#: login-utils/su-common.c:392
-#, fuzzy, c-format
-msgid " ...killed.\n"
-msgstr "...killed。\n"
+#: libfdisk/src/sgi.c:444
+#, fuzzy
+msgid "Enter of the new boot file"
+msgstr "請輸入新的啟動檔案名稱："
-#: login-utils/su-common.c:469
-msgid "may not be used by non-root users"
+#: libfdisk/src/sgi.c:449
+#, fuzzy
+msgid "Boot file is unchanged."
+msgstr "啟動檔案未變更\n"
+
+#: libfdisk/src/sgi.c:460
+#, fuzzy, c-format
+msgid "Bootfile has been changed to \"%s\"."
msgstr ""
+"\n"
+"\t開機檔案已變更為「%s」。\n"
-#: login-utils/su-common.c:497
+#: libfdisk/src/sgi.c:599
#, fuzzy
-msgid "incorrect password"
-msgstr "不正確密碼"
+msgid "More than one entire disk entry present."
+msgstr "存在多於一個完整磁碟項目。\n"
-#: login-utils/su-common.c:512
+#: libfdisk/src/sgi.c:606 libfdisk/src/sun.c:467
#, fuzzy
-msgid "failed to set PATH"
-msgstr "設定路徑時失敗"
+msgid "No partitions defined."
+msgstr "無已定義分割區\n"
-#: login-utils/su-common.c:579
+#: libfdisk/src/sgi.c:616
#, fuzzy
-msgid "cannot set groups"
-msgstr "無法設定群組"
+msgid "IRIX likes it when partition 11 covers the entire disk."
+msgstr "IRIX 偏好分割區 11 涵蓋整個磁碟。\n"
-#: login-utils/su-common.c:594 sys-utils/eject.c:675
-msgid "cannot set group id"
-msgstr "無法設定群組識別號"
+#: libfdisk/src/sgi.c:620
+#, fuzzy, c-format
+msgid "The entire disk partition should start at block 0, not at block %d."
+msgstr ""
+"整個磁碟分割區應該始於區塊 0，\n"
+"而非磁碟區塊 %d。\n"
-#: login-utils/su-common.c:596 sys-utils/eject.c:678
-msgid "cannot set user id"
-msgstr "無法設定使用者識別號"
+#: libfdisk/src/sgi.c:631
+#, fuzzy
+msgid "Partition 11 should cover the entire disk."
+msgstr "分割 11 應該封套整個磁碟。\n"
-#: login-utils/su-common.c:669
+#: libfdisk/src/sgi.c:655
#, fuzzy, c-format
-msgid " %s [options] -u <user> <command>\n"
-msgstr " %s [選項] <user> [<ttyname>]\n"
+msgid "Partitions %d and %d overlap by %d sector."
+msgid_plural "Partitions %d and %d overlap by %d sectors."
+msgstr[0] "分割區 %d 與 %d 有 %d 塊磁區相互重疊。\n"
-#: login-utils/su-common.c:670 login-utils/su-common.c:682
+#: libfdisk/src/sgi.c:666 libfdisk/src/sgi.c:688
#, fuzzy, c-format
-msgid " %s [options] [-] [<user> [<argument>...]]\n"
-msgstr " %s [選項] <program> [引數...]\n"
-
-#: login-utils/su-common.c:671
-msgid ""
-"\n"
-"Run <command> with the effective user ID and group ID of <user>. If -u is\n"
-"not given, fall back to su(1)-compatible semantics and execute standard "
-"shell.\n"
-"The options -c, -f, -l, and -s are mutually exclusive with -u.\n"
-msgstr ""
-
-#: login-utils/su-common.c:678
-#, fuzzy
-msgid " -u, --user <user> username\n"
-msgstr " -v, --verbose 是更多詳細的\n"
+msgid "Unused gap of %8u sector: sector %8u"
+msgid_plural "Unused gap of %8u sectors: sectors %8u-%u"
+msgstr[0] "%8u 塊磁區的未使用間隙 - 磁區 %8u-%u\n"
-#: login-utils/su-common.c:683
+#: libfdisk/src/sgi.c:701
#, fuzzy
-msgid ""
-"\n"
-"Change the effective user ID and group ID to that of <user>.\n"
-"A mere - implies -l. If <user> is not given, root is assumed.\n"
+msgid "The boot partition does not exist."
msgstr ""
"\n"
-" 變更有效使用者識別號和群組識別號到該的使用者。\n"
-" mere - 意味著 -l. 如果使用者無法給定的，假設根。\n"
+"開機分割區不存在。\n"
-#: login-utils/su-common.c:690
-msgid " -m, -p, --preserve-environment do not reset environment variables\n"
+#: libfdisk/src/sgi.c:705
+#, fuzzy
+msgid "The swap partition does not exist."
msgstr ""
+"\n"
+"交換分割區不存在。\n"
-#: login-utils/su-common.c:691
+#: libfdisk/src/sgi.c:709
#, fuzzy
-msgid " -g, --group <group> specify the primary group\n"
-msgstr " -i, --irq <num> 指定並列埠 irq\n"
-
-#: login-utils/su-common.c:692
-msgid ""
-" -G, --supp-group <group> specify a supplemental group\n"
-"\n"
+msgid "The swap partition has no swap type."
msgstr ""
+"\n"
+"交換分割區不具有交換類型。\n"
-#: login-utils/su-common.c:694
+#: libfdisk/src/sgi.c:712
#, fuzzy
-msgid " -, -l, --login make the shell a login shell\n"
-msgstr " -h, --help 這個小用法指導\n"
+msgid "You have chosen an unusual bootfile name."
+msgstr "\t您選擇了一個不尋常的啟動檔案名稱。\n"
-#: login-utils/su-common.c:695
+#: libfdisk/src/sgi.c:762
#, fuzzy
-msgid ""
-" -c, --command <command> pass a single command to the shell with -c\n"
-msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+msgid "Partition overlap on the disk."
+msgstr "分割重疊在之上磁碟。\n"
-#: login-utils/su-common.c:696
+#: libfdisk/src/sgi.c:847
#, fuzzy
-msgid ""
-" --session-command <command> pass a single command to the shell with -c\n"
-" and do not create a new session\n"
-msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+msgid "Attempting to generate entire disk entry automatically."
+msgstr "試圖自動產生整個磁碟項目。\n"
-#: login-utils/su-common.c:698
+#: libfdisk/src/sgi.c:852
#, fuzzy
-msgid ""
-" -f, --fast pass -f to the shell (for csh or tcsh)\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid "The entire disk is already covered with partitions."
+msgstr "整個磁碟已經被分割區所覆蓋。\n"
-#: login-utils/su-common.c:699
+#: libfdisk/src/sgi.c:856
#, fuzzy
-msgid " -s, --shell <shell> run <shell> if /etc/shells allows it\n"
-msgstr " -s, --shell <shell> 設定命令殼引言慣例\n"
-
-#: login-utils/su-common.c:796 login-utils/su-common.c:809
-#, fuzzy, c-format
-msgid "group %s does not exist"
-msgstr "使用者 %s 不存在"
+msgid "You got a partition overlap on the disk. Fix it first!"
+msgstr "您的磁碟上有重疊的分割區，請先修正它！\n"
-#: login-utils/su-common.c:805
+#: libfdisk/src/sgi.c:878 libfdisk/src/sun.c:563
#, c-format
-msgid "can't specify more than %d supplemental groups"
-msgstr ""
-
-#: login-utils/su-common.c:853
-msgid "ignore --preserve-environment, it's mutually exclusive to --login."
-msgstr ""
-
-#: login-utils/su-common.c:864
-msgid ""
-"options --{shell,fast,command,session-command,login} and --user are mutually "
-"exclusive."
-msgstr ""
+msgid "First %s"
+msgstr "起初 %s"
-#: login-utils/su-common.c:868
+#: libfdisk/src/sgi.c:902 libfdisk/src/sgi.c:953
#, fuzzy
-msgid "COMMAND not specified."
-msgstr "沒有 mountpoint 指定的。"
-
-#: login-utils/su-common.c:882
-msgid "only root can specify alternative groups"
+msgid "It is highly recommended that the eleventh partition covers the entire disk and is of type 'SGI volume'."
msgstr ""
+"強烈建議第十一塊分割區\n"
+"覆蓋整個磁碟並且為「SGI 卷冊」類型\n"
-#: login-utils/su-common.c:889
+#: libfdisk/src/sgi.c:917
#, fuzzy, c-format
-msgid "user %s does not exist"
-msgstr "使用者 %s 不存在"
+msgid "Last %s or +%s or +size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: login-utils/su-common.c:935
+#: libfdisk/src/sgi.c:989 libfdisk/src/sun.c:248
#, fuzzy, c-format
-msgid "using restricted shell %s"
-msgstr "使用限制的命令殼 %s"
+msgid "BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %ju. This value may be truncated for devices > 33.8 GB."
+msgstr ""
+"警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
+"這個值也許會被截斷用於裝置>33.8 GB。\n"
-#: login-utils/su-common.c:959
-#, fuzzy, c-format
-msgid "warning: cannot change directory to %s"
-msgstr "警告：無法變更目錄到 %s"
+#: libfdisk/src/sgi.c:1056
+#, fuzzy
+msgid "Created a new SGI disklabel."
+msgstr "建立新的清空 Sun disklabel"
-#: login-utils/sulogin.c:91
+#: libfdisk/src/sgi.c:1075
#, fuzzy
-msgid "tcgetattr failed"
-msgstr "tcgetattr 失敗"
+msgid "Sorry, only for non-empty partitions you can change the tag."
+msgstr "抱歉，只有用於非空分割區您可以變更標籤。\n"
-#: login-utils/sulogin.c:166
+#: libfdisk/src/sgi.c:1081
#, fuzzy
-msgid "tcsetattr failed"
-msgstr "tcsetattr 失敗"
+msgid "Consider leaving partition 9 as volume header (0), and partition 11 as entire volume (6), as IRIX expects it."
+msgstr ""
+"考慮保留分割區 9 為卷冊標頭 (0)，\n"
+"以及分割區 11 為整個卷冊 (6)，如同 IRIX 所預期。\n"
+"\n"
-#: login-utils/sulogin.c:426
-#, fuzzy, c-format
-msgid "%s: no entry for root\n"
-msgstr "%s：沒有條目用於根\n"
+#: libfdisk/src/sgi.c:1090
+#, fuzzy
+msgid "It is highly recommended that the partition at offset 0 is of type \"SGI volhdr\", the IRIX system will rely on it to retrieve from its directory standalone tools like sash and fx. Only the \"SGI volume\" entire disk section may violate this. Are you sure about tagging this partition differently?"
+msgstr ""
+"強烈建議位於偏移 0 的分割區\n"
+"類型為「SGI volhdr」，IRIX 系統將會依靠它以\n"
+"取回它的目錄獨立工具，諸如 sash 和 fx。\n"
+"只有「SGI 卷冊」整個磁碟區段的話，也許會對此有所妨害。\n"
+"如果您確定將這個分割區貼上不同的標籤，就輸入 YES。\n"
-#: login-utils/sulogin.c:453
-#, fuzzy, c-format
-msgid "%s: no entry for root"
-msgstr "%s：沒有條目用於根"
+#: libfdisk/src/sun.c:39
+msgid "Unassigned"
+msgstr "未指定"
-#: login-utils/sulogin.c:457
-#, fuzzy, c-format
-msgid "%s: root password garbled"
-msgstr "%s：Root 密碼錯亂"
+#: libfdisk/src/sun.c:41
+msgid "SunOS root"
+msgstr "SunOS 根分割區"
-#: login-utils/sulogin.c:485
-#, fuzzy, c-format
-msgid "Give root password for login: "
-msgstr "給出 Root 密碼用於維護\n"
+#: libfdisk/src/sun.c:42
+msgid "SunOS swap"
+msgstr "SunOS 交換分割區"
-#: login-utils/sulogin.c:487
-#, fuzzy, c-format
-msgid "Press Enter for login: "
-msgstr "按下輸入用於維護"
+#: libfdisk/src/sun.c:43
+msgid "SunOS usr"
+msgstr "SunOS usr 分割區"
-#: login-utils/sulogin.c:490
-#, fuzzy, c-format
-msgid "Give root password for maintenance\n"
-msgstr "給出 Root 密碼用於維護\n"
+#: libfdisk/src/sun.c:44
+msgid "Whole disk"
+msgstr "整顆磁碟"
-#: login-utils/sulogin.c:492
-#, fuzzy, c-format
-msgid "Press Enter for maintenance"
-msgstr "按下輸入用於維護"
+#: libfdisk/src/sun.c:45
+msgid "SunOS stand"
+msgstr "SunOS stand 分割區"
-#: login-utils/sulogin.c:493
-#, fuzzy, c-format
-msgid "(or press Control-D to continue): "
-msgstr "(或型態 Control-D 到繼續)："
+#: libfdisk/src/sun.c:46
+msgid "SunOS var"
+msgstr "SunOS var 分割區"
-#: login-utils/sulogin.c:605
-#, fuzzy, c-format
-msgid "%s: read failed"
-msgstr "fread 失敗"
+#: libfdisk/src/sun.c:47
+msgid "SunOS home"
+msgstr "SunOS home 分割區"
-#: login-utils/sulogin.c:683
-#, fuzzy
-msgid "change directory to system root failed"
-msgstr "變更目錄到系統根失敗"
+#: libfdisk/src/sun.c:48
+msgid "SunOS alt sectors"
+msgstr "SunOS alt 磁區"
-#: login-utils/sulogin.c:732
-#, fuzzy
-msgid "setexeccon failed"
-msgstr "setexeccon 失敗"
+#: libfdisk/src/sun.c:49
+msgid "SunOS cachefs"
+msgstr "SunOS 快取檔案系統"
-#: login-utils/sulogin.c:752
-#, fuzzy, c-format
-msgid " %s [options] [tty device]\n"
-msgstr " %s [選項] [tty 裝置]\n"
+#: libfdisk/src/sun.c:50
+msgid "SunOS reserved"
+msgstr "SunOS 保留區"
-#: login-utils/sulogin.c:755
-#, fuzzy
-msgid ""
-" -p, --login-shell start a login shell\n"
-" -t, --timeout <seconds> max time to wait for a password (default: no "
-"limit)\n"
-" -e, --force examine password files directly if getpwnam(3) "
-"fails\n"
+#: libfdisk/src/sun.c:86
+#, c-format
+msgid "#%zu: start cylinder overflows Sun label limits"
msgstr ""
-" -p, --login-shell 開始登入命令殼\n"
-" -t, --timeout <seconds> 最大時間到等待密碼 (預設：沒有限制)\n"
-" -e, --force 檢查密碼檔案直接如果 getpwnam (3) 失敗\n"
-
-#: login-utils/sulogin.c:806 misc-utils/findmnt.c:1335 sys-utils/wdctl.c:508
-#: term-utils/wall.c:130
-#, fuzzy
-msgid "invalid timeout argument"
-msgstr "無效的逾時引數"
-#: login-utils/sulogin.c:828
-#, fuzzy
-msgid "only root can run this program."
-msgstr "只有根可以運行這個程式。"
+#: libfdisk/src/sun.c:89
+#, c-format
+msgid "#%zu: number of sectors overflow Sun label limits"
+msgstr ""
-#: login-utils/sulogin.c:871
+#: libfdisk/src/sun.c:136
#, fuzzy
-msgid "cannot open console"
-msgstr "無法開啟 %s"
+msgid "Detected sun disklabel with wrong checksum. Probably you'll have to set all the values, e.g. heads, sectors, cylinders and partitions or force a fresh label (s command in main menu)"
+msgstr ""
+"偵測到具有錯誤總和檢查碼的 sun 磁碟標籤。\n"
+"也許您必須設定所有的值，\n"
+"例如：磁頭、磁區、磁柱和分割區，\n"
+"或是強制設定新的標籤 (使用主選單的 s 命令)\n"
-#: login-utils/sulogin.c:878
-#, fuzzy
-msgid "cannot open password database."
-msgstr "無法開啟密碼資料庫。"
+#: libfdisk/src/sun.c:153
+#, fuzzy, c-format
+msgid "Detected sun disklabel with wrong version [%d]."
+msgstr "偵測到具有錯誤版本 [0x%08x] 的 sun 磁碟標籤。\n"
-#: login-utils/sulogin.c:937
-#, fuzzy
-msgid "crypt failed"
-msgstr "寫å\85¥å¤±æ\95\97"
+#: libfdisk/src/sun.c:158
+#, fuzzy, c-format
+msgid "Detected sun disklabel with wrong vtoc.sanity [0x%08x]."
+msgstr "å\81µæ¸¬å\88°å\85·æ\9c\89ä¸\8då®\8cæ\95´æ\80§ [0x%08x] ç\9a\84 sun ç£\81ç¢\9fæ¨\99籤ã\80\82\n"
-#: login-utils/sulogin.c:954
+#: libfdisk/src/sun.c:163
#, fuzzy, c-format
-msgid ""
-"Can not execute su shell\n"
-"\n"
-msgstr "無法取得磁碟大小"
+msgid "Detected sun disklabel with wrong vtoc.nparts [%u]."
+msgstr "偵測到具有錯誤分割區數 [%u] 的 sun 磁碟標籤。\n"
-#: login-utils/sulogin.c:961
+#: libfdisk/src/sun.c:168
#, fuzzy
-msgid ""
-"Timed out\n"
-"\n"
-msgstr "已逾時"
-
-#: login-utils/utmpdump.c:128
-#, c-format
-msgid "%s: stat failed"
-msgstr "%s：stat 失敗"
+msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)"
+msgstr "警告：錯誤值需要經由 w(rite) 而修正\n"
-#: login-utils/utmpdump.c:165 text-utils/tailf.c:164
-#, c-format
-msgid "%s: cannot add inotify watch."
-msgstr "%s：無法加入 inotify 監看。"
+#: libfdisk/src/sun.c:193
+msgid "Heads"
+msgstr "磁頭"
-#: login-utils/utmpdump.c:174 text-utils/tailf.c:173
-#, c-format
-msgid "%s: cannot read inotify events"
-msgstr "%s：無法讀取 inotify 事件"
+#: libfdisk/src/sun.c:198
+msgid "Sectors/track"
+msgstr "磁區/磁軌"
-#: login-utils/utmpdump.c:235 login-utils/utmpdump.c:240
+#: libfdisk/src/sun.c:301
#, fuzzy
-msgid "Extraneous newline in file. Exiting."
-msgstr "å¤\96ä¾\86æ\96°å\88\97å\97å\85\83å\9c¨ä¸æª\94æ¡\88ã\80\82é\9b¢é\96\8bã\80\82"
+msgid "Created a new Sun disklabel."
+msgstr "建ç«\8bæ\96°ç\9a\84æ¸\85空 Sun disklabel"
-#: login-utils/utmpdump.c:297
+#: libfdisk/src/sun.c:425
#, fuzzy, c-format
-msgid " %s [options] [filename]\n"
-msgstr " %s [選項] [檔名]\n"
-
-#: login-utils/utmpdump.c:300
-#, fuzzy
-msgid " -f, --follow output appended data as the file grows\n"
-msgstr ""
-" -f, --follow 輸出附加的資料做為檔案 grows\n"
-" -r, --reverse 寫入上一步傾印的資料進入 utmp 檔案\n"
-
-#: login-utils/utmpdump.c:301
-#, fuzzy
-msgid " -r, --reverse write back dumped data into utmp file\n"
-msgstr ""
-" -f, --follow 輸出附加的資料做為檔案 grows\n"
-" -r, --reverse 寫入上一步傾印的資料進入 utmp 檔案\n"
-
-#: login-utils/utmpdump.c:302
-#, fuzzy
-msgid " -o, --output <file> write to file instead of standard output\n"
-msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+msgid "Partition %u doesn't end on cylinder boundary."
+msgstr "分割區 %d 並非結束於磁柱邊界\n"
-#: login-utils/utmpdump.c:369
-#, fuzzy
-msgid "following standard input is unsupported"
-msgstr "下列標準輸入被不受支援的"
+#: libfdisk/src/sun.c:444
+#, fuzzy, c-format
+msgid "Partition %u overlaps with others in sectors %u-%u."
+msgstr "分割區 %d 與 %d-%d 中的其他磁區重疊\n"
-#: login-utils/utmpdump.c:375
+#: libfdisk/src/sun.c:472
#, fuzzy, c-format
-msgid "Utmp undump of %s\n"
-msgstr "Utmp undump 的 %s\n"
+msgid "Unused gap - sectors 0-%u."
+msgstr "未使用的間隙 - 磁區 0-%d\n"
-#: login-utils/utmpdump.c:378
+#: libfdisk/src/sun.c:474 libfdisk/src/sun.c:480
#, fuzzy, c-format
-msgid "Utmp dump of %s\n"
-msgstr "Utmp 傾印的 %s\n"
+msgid "Unused gap - sectors %u-%u."
+msgstr "未使用的間隙 - 磁區 %d-%d\n"
-#: login-utils/vipw.c:151 term-utils/wall.c:192
+#: libfdisk/src/sun.c:542
#, fuzzy
-msgid "can't open temporary file"
-msgstr "無法開啟暫存檔"
+msgid "Other partitions already cover the whole disk. Delete some/shrink them before retry."
+msgstr ""
+"其他分割區已經涵蓋整個磁碟。\n"
+"請於重試之前刪除部分或縮減它們。\n"
+
+#: libfdisk/src/sun.c:559
+#, fuzzy
+msgid "It is highly recommended that the third partition covers the whole disk and is of type `Whole disk'"
+msgstr ""
+"強烈建議第三分割區包括\n"
+"整個磁碟並且為「整顆磁碟」類型\n"
+
+#: libfdisk/src/sun.c:601
+#, c-format
+msgid "Aligning the first sector from %u to %u to be on cylinder boundary."
+msgstr ""
-#: login-utils/vipw.c:167
+#: libfdisk/src/sun.c:629
#, fuzzy, c-format
-msgid "%s: create a link to %s failed"
-msgstr "%s：建立連結到 %s 失敗"
+msgid "Sector %d is already allocated"
+msgstr "磁區 %d 已經被配置\n"
-#: login-utils/vipw.c:174
+#: libfdisk/src/sun.c:658
#, fuzzy, c-format
-msgid "Can't get context for %s"
-msgstr "無法提取語境用於 %s"
+msgid "Last %s or +/-%s or +/-size{K,M,G,T,P}"
+msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
-#: login-utils/vipw.c:180
+#: libfdisk/src/sun.c:706
#, fuzzy, c-format
-msgid "Can't set context for %s"
-msgstr "無法設定語境用於 %s"
+msgid ""
+"You haven't covered the whole disk with the 3rd partition, but your value\n"
+"%lu %s covers some other partition. Your entry has been changed\n"
+"to %lu %s"
+msgstr ""
+"您未以第三分割區涵蓋整個磁碟，但是您設定的值\n"
+"%d %s 涵蓋某些其他的分割區。您的輸入值已變更\n"
+"為 %d %s\n"
-#: login-utils/vipw.c:245
+#: libfdisk/src/sun.c:749
#, fuzzy, c-format
-msgid "%s unchanged"
-msgstr "%s 未變更"
+msgid "If you want to maintain SunOS/Solaris compatibility, consider leaving this partition as Whole disk (5), starting at 0, with %u sectors"
+msgstr ""
+"如果您要維持 SunOS/Solaris 的相容性，請考慮保持這個\n"
+"分割區為整個磁碟 (5)，開始於 0, 具備 %u 磁區\n"
-#: login-utils/vipw.c:261
+#: libfdisk/src/sun.c:773
#, fuzzy
-msgid "cannot get lock"
-msgstr "無法提取鎖定"
+msgid "Label ID"
+msgstr "標籤：%.*s\n"
-#: login-utils/vipw.c:288
+#: libfdisk/src/sun.c:778
#, fuzzy
-msgid "no changes made"
-msgstr "沒有變更所做"
+msgid "Volume ID"
+msgstr "卷冊：<%-6s>\n"
-#: login-utils/vipw.c:297
+#: libfdisk/src/sun.c:788
#, fuzzy
-msgid "cannot chmod file"
-msgstr "無法 chmod 檔案"
-
-#: login-utils/vipw.c:353
-#, c-format
-msgid "You are using shadow groups on this system.\n"
-msgstr "您正在這個系統中使用陰影群組。\n"
+msgid "Alternate cylinders"
+msgstr "替代磁柱數量"
-#: login-utils/vipw.c:354
-#, c-format
-msgid "You are using shadow passwords on this system.\n"
-msgstr "您正在這個系統中使用陰影密碼。\n"
+#: libfdisk/src/sun.c:894
+msgid "Number of alternate cylinders"
+msgstr "替代磁柱數量"
-#. TRANSLATORS: this program uses for y and n rpmatch(3),
-#. * which means they can be translated.
-#: login-utils/vipw.c:357
-#, c-format
-msgid "Would you like to edit %s now [y/n]? "
-msgstr "您現在想要編輯 %s 嗎[y/n]？"
+#: libfdisk/src/sun.c:919
+msgid "Extra sectors per cylinder"
+msgstr "每磁柱的額外磁區"
-#: misc-utils/cal.c:370
-#, fuzzy
-msgid "illegal day value"
-msgstr "不合法的天值"
+#: libfdisk/src/sun.c:943
+msgid "Interleave factor"
+msgstr "交錯因子"
-#: misc-utils/cal.c:372 misc-utils/cal.c:386
-#, c-format
-msgid "illegal day value: use 1-%d"
-msgstr "不合法的日號：使用 1-%d"
+#: libfdisk/src/sun.c:967
+msgid "Rotation speed (rpm)"
+msgstr "旋轉速度 (rpm)"
-#: misc-utils/cal.c:375 misc-utils/cal.c:377
-msgid "illegal month value: use 1-12"
-msgstr "不合法的月分：使用 1-12"
+#: libfdisk/src/sun.c:991
+msgid "Number of physical cylinders"
+msgstr "實體磁柱數量"
-#: misc-utils/cal.c:380
+#: libfdisk/src/sun.c:1056
#, fuzzy
-msgid "illegal year value"
-msgstr "不合法的天值"
+msgid ""
+"Consider leaving partition 3 as Whole disk (5),\n"
+"as SunOS/Solaris expects it and even Linux likes it.\n"
+msgstr ""
+"考慮保留分割區 3 為整個磁碟 (5)，\n"
+"SunOS/Solaris 是如此預期．甚至 Linux 也喜歡它。\n"
+"\n"
-#: misc-utils/cal.c:382
+#: libfdisk/src/sun.c:1067
#, fuzzy
-msgid "illegal year value: use positive integer"
-msgstr "不合法的年分：使用 1-9999"
+msgid ""
+"It is highly recommended that the partition at offset 0\n"
+"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
+"there may destroy your partition table and bootblock.\n"
+"Are you sure you want to tag the partition as Linux swap?"
+msgstr ""
+"強烈建議位於偏移值 0 的分割區\n"
+"為 UFS、EXT2FS 檔案系統或 SunOS 交換區。將 Linux 交換區放在\n"
+"那裡也許會銷毀您的分割表和啟動區塊。\n"
+"如果您很確定想要該分割區被\n"
+"標示為 82 (Linux 交換區) 就輸入 YES："
-#: misc-utils/cal.c:468
+#: lib/logindefs.c:216
#, fuzzy, c-format
-msgid "%s"
-msgstr "%s"
-
-#: misc-utils/cal.c:471
-#, c-format
-msgid "%ld"
-msgstr ""
+msgid "%s: %s contains invalid numerical value: %s"
+msgstr "%s：%s 含有無效的數值：%s"
-#: misc-utils/cal.c:475
+#: lib/logindefs.c:266
#, fuzzy, c-format
-msgid "%s %ld"
-msgstr "%s %d"
+msgid "Error reading login.defs: %s"
+msgstr "讀取 %s 時發生錯誤\n"
-#: misc-utils/cal.c:808
+#: lib/logindefs.c:333 lib/logindefs.c:353 lib/logindefs.c:379
#, fuzzy, c-format
-msgid " %s [options] [[[day] month] year]\n"
-msgstr " %s [選項] [[[天] 月] 年]\n"
+msgid "couldn't fetch %s: %s"
+msgstr "無法開啟 %s：%s\n"
-#: misc-utils/cal.c:811
-#, fuzzy
-msgid " -1, --one show only current month (default)\n"
-msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+#: lib/logindefs.c:538
+msgid "hush login status: restore original IDs failed"
+msgstr ""
-#: misc-utils/cal.c:812
-#, fuzzy
-msgid " -3, --three show previous, current and next month\n"
-msgstr " -c, --creator 顯示建立者和擁有者\n"
-
-#: misc-utils/cal.c:813
-#, fuzzy
-msgid " -s, --sunday Sunday as first day of week\n"
-msgstr " -n, --noparity 設定同位到無\n"
-
-#: misc-utils/cal.c:814
-#, fuzzy
-msgid " -m, --monday Monday as first day of week\n"
-msgstr " -n, --noparity 設定同位到無\n"
+#: libmount/src/context.c:2700
+#, fuzzy, c-format
+msgid "operation failed: %m"
+msgstr "開啟失敗：%s"
-#: misc-utils/cal.c:815
-#, fuzzy
-msgid " -j, --julian output Julian dates\n"
-msgstr " -V 輸出版本資訊然後離開\n"
+#: libmount/src/context_mount.c:1404
+#, fuzzy, c-format
+msgid "WARNING: failed to apply propagation flags"
+msgstr "附加選項時失敗"
-#: misc-utils/cal.c:816
-#, fuzzy
-msgid " -y, --year show whole current year\n"
-msgstr " -c, --creator 顯示建立者和擁有者\n"
+#: libmount/src/context_mount.c:1414
+#, fuzzy, c-format
+msgid "WARNING: source write-protected, mounted read-only"
+msgstr "%s 被防止寫入的，掛載唯讀"
-#: misc-utils/cal.c:817
-msgid " --color[=<when>] colorize messages (auto, always or never)\n"
+#: libmount/src/context_mount.c:1428
+#, c-format
+msgid "operation permitted for root only"
msgstr ""
-#: misc-utils/findfs.c:22
+#: libmount/src/context_mount.c:1432
#, fuzzy, c-format
-msgid ""
-" %1$s [options] LABEL=<label>\n"
-" %1$s [options] UUID=<uuid>\n"
-msgstr ""
-" %1$s [選項] 標貼=<label>\n"
-" %1$s [選項] UUID=<uuid>\n"
-
-#: misc-utils/findfs.c:64
-#, c-format
-msgid "unable to resolve '%s'"
-msgstr "無法解決「%s」"
+msgid "%s is already mounted"
+msgstr "%s 已經掛載"
-#: misc-utils/findmnt.c:113
-#, fuzzy
-msgid "source device"
-msgstr "來源裝置"
+#: libmount/src/context_mount.c:1438
+#, fuzzy, c-format
+msgid "can't find in %s"
+msgstr "找不到 %s 在中 %s"
-#: misc-utils/findmnt.c:114
-#, fuzzy
-msgid "mountpoint"
-msgstr "mountpoint"
+#: libmount/src/context_mount.c:1441
+#, fuzzy, c-format
+msgid "can't find mount point in %s"
+msgstr "找不到 mountpoint %s 在中 %s"
-#: misc-utils/findmnt.c:115 misc-utils/lsblk.c:123
-#, fuzzy
-msgid "filesystem type"
-msgstr "æª\94æ¡\88系統å\9e\8bæ\85\8b"
+#: libmount/src/context_mount.c:1444
+#, fuzzy, c-format
+msgid "can't find mount source %s in %s"
+msgstr "æ\89¾ä¸\8då\88°æ\8e\9bè¼\89ä¾\86æº\90 %s å\9c¨ä¸ %s"
-#: misc-utils/findmnt.c:116
-#, fuzzy
-msgid "all mount options"
-msgstr "所有掛載選項"
+#: libmount/src/context_mount.c:1449
+#, c-format
+msgid "more filesystems detected on %s; use -t <type> or wipefs(8)"
+msgstr ""
-#: misc-utils/findmnt.c:117
-#, fuzzy
-msgid "VFS specific mount options"
-msgstr "VFS 特定的掛載選項"
+#: libmount/src/context_mount.c:1454
+#, fuzzy, c-format
+msgid "failed to determine filesystem type"
+msgstr "%s：無法讀取速度"
-#: misc-utils/findmnt.c:118
-#, fuzzy
-msgid "FS specific mount options"
-msgstr "FS 特定的掛載選項"
+#: libmount/src/context_mount.c:1455
+#, fuzzy, c-format
+msgid "no valid filesystem type specified"
+msgstr "未指定任何檔名"
-#: misc-utils/findmnt.c:119
-#, fuzzy
-msgid "filesystem label"
-msgstr "æª\94æ¡\88系統æ¨\99è²¼"
+#: libmount/src/context_mount.c:1462
+#, fuzzy, c-format
+msgid "can't find %s"
+msgstr "æ\89¾ä¸\8då\88° %s"
-#: misc-utils/findmnt.c:120 misc-utils/lsblk.c:126
-#, fuzzy
-msgid "filesystem UUID"
-msgstr "æª\94æ¡\88系統 UUID"
+#: libmount/src/context_mount.c:1464
+#, fuzzy, c-format
+msgid "no mount source specified"
+msgstr "æ²\92æ\9c\89 mountpoint æ\8c\87å®\9aç\9a\84ã\80\82"
-#: misc-utils/findmnt.c:121
-#, fuzzy
-msgid "partition label"
-msgstr "å\88\86å\89²æ¨\99è²¼"
+#: libmount/src/context_mount.c:1475
+#, fuzzy, c-format
+msgid "failed to parse mount options '%s': %m"
+msgstr "å\89\96æ\9e\90æ\8e\9bè¼\89é\81¸é \85æ\99\82失æ\95\97"
-#: misc-utils/findmnt.c:123 misc-utils/lsblk.c:122
-#, fuzzy
-msgid "major:minor device number"
-msgstr "主è¦\81ç\9a\84ï¼\9a次ç´\9aè£\9dç½®æ\95¸å\97"
+#: libmount/src/context_mount.c:1476
+#, fuzzy, c-format
+msgid "failed to parse mount options '%s'"
+msgstr "å\89\96æ\9e\90æ\8e\9bè¼\89é\81¸é \85æ\99\82失æ\95\97"
-#: misc-utils/findmnt.c:124
-#, fuzzy
-msgid "action detected by --poll"
-msgstr "å\8b\95ä½\9cå\81µæ¸¬å\88°ç\94± --poll"
+#: libmount/src/context_mount.c:1479
+#, fuzzy, c-format
+msgid "failed to parse mount options: %m"
+msgstr "å\89\96æ\9e\90æ\8e\9bè¼\89é\81¸é \85æ\99\82失æ\95\97"
-#: misc-utils/findmnt.c:125
-#, fuzzy
-msgid "old mount options saved by --poll"
-msgstr "舊的掛載選項儲存的由 --poll"
+#: libmount/src/context_mount.c:1480
+#, fuzzy, c-format
+msgid "failed to parse mount options"
+msgstr "剖析掛載選項時失敗"
-#: misc-utils/findmnt.c:126
-#, fuzzy
-msgid "old mountpoint saved by --poll"
-msgstr "舊的 mountpoint 儲存的由 --poll"
+#: libmount/src/context_mount.c:1485
+#, fuzzy, c-format
+msgid "failed to setup loop device for %s"
+msgstr "%s：無法設定迴圈裝置"
-#: misc-utils/findmnt.c:127
-#, fuzzy
-msgid "filesystem size"
-msgstr "檔案系統大小"
+#: libmount/src/context_mount.c:1489
+#, fuzzy, c-format
+msgid "overlapping loop device exists for %s"
+msgstr "%s 不是 lp 裝置"
-#: misc-utils/findmnt.c:128
-#, fuzzy
-msgid "filesystem size available"
-msgstr "檔案系統大小可用"
+#: libmount/src/context_mount.c:1493 libmount/src/context_umount.c:1263
+#, fuzzy, c-format
+msgid "locking failed"
+msgstr "關閉 %s 失敗"
-#: misc-utils/findmnt.c:129
-#, fuzzy
-msgid "filesystem size used"
-msgstr "檔案系統大小使用"
+#: libmount/src/context_mount.c:1497 libmount/src/context_umount.c:1269
+#: sys-utils/umount.c:261 sys-utils/umount.c:277
+#, fuzzy, c-format
+msgid "failed to switch namespace"
+msgstr "狀態的裝置"
-#: misc-utils/findmnt.c:130
-#, fuzzy
-msgid "filesystem use percentage"
-msgstr "檔案系統使用百分比"
+#: libmount/src/context_mount.c:1501
+#, fuzzy, c-format
+msgid "filesystem already mounted"
+msgstr "%s 已經掛載"
-#: misc-utils/findmnt.c:131
-#, fuzzy
-msgid "filesystem root"
-msgstr "æª\94æ¡\88ç³»çµ±æ ¹"
+#: libmount/src/context_mount.c:1504
+#, fuzzy, c-format
+msgid "mount failed: %m"
+msgstr "æ\8e\9bè¼\89失æ\95\97"
-#: misc-utils/findmnt.c:132
-#, fuzzy
-msgid "task ID"
-msgstr "任務識別號"
+#: libmount/src/context_mount.c:1514
+#, fuzzy, c-format
+msgid "filesystem was mounted, but failed to update userspace mount table"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/findmnt.c:133
-#, fuzzy
-msgid "mount ID"
-msgstr "掛載"
+#: libmount/src/context_mount.c:1520
+#, fuzzy, c-format
+msgid "filesystem was mounted, but failed to switch namespace back"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/findmnt.c:134
-#, fuzzy
-msgid "optional mount fields"
-msgstr "mount：掛載時失敗"
+#: libmount/src/context_mount.c:1526
+#, fuzzy, c-format
+msgid "filesystem was mounted, but failed to change ownership: %m"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/findmnt.c:135
-#, fuzzy
-msgid "VFS propagation flags"
-msgstr "分割旗標"
+#: libmount/src/context_mount.c:1532
+#, fuzzy, c-format
+msgid "filesystem was mounted, but failed to change mode: %m"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/findmnt.c:136
-msgid "dump(8) period in days [fstab only]"
-msgstr ""
+#: libmount/src/context_mount.c:1538
+#, fuzzy, c-format
+msgid "filesystem was mounted, but failed to attach idmapping"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/findmnt.c:137
-msgid "pass number on parallel fsck(8) [fstab only]"
-msgstr ""
+#: libmount/src/context_mount.c:1544
+#, fuzzy, c-format
+msgid "filesystem was mounted, but any subsequent operation failed: %m"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/findmnt.c:318
+#: libmount/src/context_mount.c:1562 libmount/src/context_mount.c:1607
#, fuzzy, c-format
-msgid "unknown action: %s"
-msgstr "不明動作：%s"
+msgid "mount point is not a directory"
+msgstr "掛載點 %s 並非目錄"
-#: misc-utils/findmnt.c:619
-#, fuzzy
-msgid "mount"
-msgstr "æ\8e\9bè¼\89"
+#: libmount/src/context_mount.c:1564 login-utils/newgrp.c:228
+#, fuzzy, c-format
+msgid "permission denied"
+msgstr "æ¬\8aé\99\90被æ\8b\92"
-#: misc-utils/findmnt.c:622
-#, fuzzy
-msgid "umount"
-msgstr "umount"
+#: libmount/src/context_mount.c:1566
+#, fuzzy, c-format
+msgid "must be superuser to use mount"
+msgstr "必須是系統管理者以使用掛載"
-#: misc-utils/findmnt.c:625
-#, fuzzy
-msgid "remount"
-msgstr "remount"
+#: libmount/src/context_mount.c:1573
+#, fuzzy, c-format
+msgid "mount point is busy"
+msgstr "mount：%s 忙碌中"
-#: misc-utils/findmnt.c:628
-#, fuzzy
-msgid "move"
-msgstr "移動"
+#: libmount/src/context_mount.c:1580
+#, fuzzy, c-format
+msgid "%s already mounted on %s"
+msgstr "mount：%s 已經掛載到 %s\n"
-#: misc-utils/findmnt.c:749
+#: libmount/src/context_mount.c:1584
#, fuzzy, c-format
-msgid "%s: parse error at line %d"
-msgstr "%s：剖析錯誤於列 %d"
+msgid "%s already mounted or mount point busy"
+msgstr "%s 已經掛載的或 %s 忙碌"
-#: misc-utils/findmnt.c:778 misc-utils/findmnt.c:997 sys-utils/eject.c:731
-#: sys-utils/mount.c:640
-#, fuzzy
-msgid "failed to initialize libmount table"
-msgstr "初始化 libmount 表格時失敗"
+#: libmount/src/context_mount.c:1589
+#, fuzzy, c-format
+msgid "mount point does not exist"
+msgstr "掛載點 %s 不存在"
-#: misc-utils/findmnt.c:805 text-utils/parse.c:64
+#: libmount/src/context_mount.c:1592
#, fuzzy, c-format
-msgid "can't read %s"
-msgstr "無法讀取 %s"
+msgid "mount point is a symbolic link to nowhere"
+msgstr "掛載點 %s 是符號連結到 nowhere"
-#: misc-utils/findmnt.c:937 misc-utils/findmnt.c:1003 sys-utils/mount.c:135
-#: sys-utils/mount.c:183 sys-utils/swapoff.c:98 sys-utils/swapon.c:207
-#: sys-utils/swapon.c:238 sys-utils/swapon.c:636 sys-utils/umount.c:272
-msgid "failed to initialize libmount iterator"
-msgstr "初始化 libmount 迭代器時失敗"
+#: libmount/src/context_mount.c:1597
+#, fuzzy, c-format
+msgid "special device %s does not exist"
+msgstr "特殊裝置 %s 不存在"
-#: misc-utils/findmnt.c:1009
-#, fuzzy
-msgid "failed to initialize libmount tabdiff"
-msgstr "初始化 libmount tabdiff 時失敗"
+#: libmount/src/context_mount.c:1600 libmount/src/context_mount.c:1616
+#: libmount/src/context_mount.c:1700 libmount/src/context_mount.c:1723
+#, fuzzy, c-format
+msgid "mount(2) system call failed: %m"
+msgstr "掛載 (2) 失敗"
-#: misc-utils/findmnt.c:1037
-#, fuzzy
-msgid "poll() failed"
-msgstr "意見調查() 失敗"
+#: libmount/src/context_mount.c:1612
+#, fuzzy, c-format
+msgid "special device %s does not exist (a path prefix is not a directory)"
+msgstr "特殊裝置 %s 不存在 (a 路徑前綴並非目錄)"
-#: misc-utils/findmnt.c:1099
+#: libmount/src/context_mount.c:1624
#, fuzzy, c-format
-msgid ""
-" %1$s [options]\n"
-" %1$s [options] <device> | <mountpoint>\n"
-" %1$s [options] <device> <mountpoint>\n"
-" %1$s [options] [--source <device>] [--target <mountpoint>]\n"
-msgstr ""
-" %1$s [選項]\n"
-" %1$s [選項] <device>|<mountpoint>\n"
-" %1$s [選項]<裝置><mountpoint>\n"
-" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
+msgid "mount point not mounted or bad option"
+msgstr "掛載：%s 無法掛載的或不當的選項"
-#: misc-utils/findmnt.c:1106
+#: libmount/src/context_mount.c:1626
#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -s, --fstab search in static table of filesystems\n"
-" -m, --mtab search in table of mounted filesystems\n"
-" -k, --kernel search in kernel table of mounted\n"
-" filesystems (default)\n"
-"\n"
+msgid "not mount point or bad option"
+msgstr "%s 不是 mountpoint 或不當的選項"
+
+#: libmount/src/context_mount.c:1629
+#, c-format
+msgid "bad option; moving a mount residing under a shared mount is unsupported"
msgstr ""
-"\n"
-"選項：\n"
-" -s, --fstab 搜尋在中靜態表格的檔案系統\n"
-" -m, --mtab 搜尋在中表格的掛載的檔案系統\n"
-" -k, --kernel 搜尋在中內核表格的掛載\n"
-" 檔案系統 (預設)\n"
-"\n"
-#: misc-utils/findmnt.c:1113
+#: libmount/src/context_mount.c:1633
#, fuzzy, c-format
-msgid ""
-" -p, --poll[=<list>] monitor changes in table of mounted filesystems\n"
-" -w, --timeout <num> upper limit in milliseconds that --poll will block\n"
-"\n"
+msgid "bad option; for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program"
msgstr ""
-" -p, --poll [=<list>] 監視器變更在中表格的掛載的檔案系統\n"
-" -w, --timeout<num> 上限在中毫秒該 --poll 將區塊\n"
-"\n"
+" (對於許多檔案系統 (例如 nfs，cifs) 您也許\n"
+" 需要 /sbin/mount.<type> 輔助程式)"
-#: misc-utils/findmnt.c:1117
-#, fuzzy, c-format
-msgid ""
-" -A, --all disable all built-in filters, print all filesystems\n"
-" -a, --ascii use ASCII chars for tree formatting\n"
-" -c, --canonicalize canonicalize printed paths\n"
-" -D, --df imitate the output of df(1)\n"
-" -d, --direction <word> direction of search, 'forward' or 'backward'\n"
-" -e, --evaluate convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
-" to device names\n"
-" -F, --tab-file <path> alternative file for --fstab, --mtab or --kernel "
-"options\n"
-" -f, --first-only print the first found filesystem only\n"
-msgstr ""
-" -A, --all 全部停用內建篩選器，列印所有檔案系統\n"
-" -a, --ascii 使用 ASCII 字元用於樹格式化\n"
-" -c, --canonicalize 正則化列印的路徑\n"
-" -D, --df imitate 輸出的 df (1)\n"
-" -d, --direction <word> 方向的搜尋，『轉寄』或『退一步』\n"
-" -e, --evaluate 轉換標籤 (標貼，UUID，PARTUUID，PARTLABEL)\n"
-" 到裝置名稱\n"
-" -F, --tab-file<路徑> 替代方案檔案用於 --fstab，--mtab 或 --kernel 選項\n"
-" -f, --first-only 列印第一個找到檔案系統只有\n"
-
-#: misc-utils/findmnt.c:1128
+#: libmount/src/context_mount.c:1637
#, fuzzy, c-format
-msgid ""
-" -i, --invert invert the sense of matching\n"
-" -l, --list use list format output\n"
-" -N, --task <tid> use alternative namespace (/proc/<tid>/mountinfo "
-"file)\n"
-" -n, --noheadings don't print column headings\n"
-" -u, --notruncate don't truncate text in columns\n"
-msgstr ""
-" -i, --invert 反向 sense 的匹配\n"
-" -l, --list 使用清單格式輸出\n"
-" -N, --task <tid> 使用替代方案命名空間 (/proc/<tid>/mountinfo 檔案)\n"
-" -n, --noheadings 不列印欄標頭\n"
-" -u, --notruncate 不截斷文字在中欄位\n"
-
-#: misc-utils/findmnt.c:1133
-msgid " -O, --options <list> limit the set of filesystems by mount options\n"
+msgid "wrong fs type, bad option, bad superblock on %s, missing codepage or helper program, or other error"
msgstr ""
+"錯誤的 fs 型態，不當的選項，不當的超區塊於 %s，\n"
+" 缺少的編碼頁或輔助程式程式，或其他錯誤"
-#: misc-utils/findmnt.c:1134
-#, fuzzy
-msgid " -o, --output <list> the output columns to be shown\n"
-msgstr " -o, --options <optstring> 短選項為辨識的\n"
+#: libmount/src/context_mount.c:1644
+#, c-format
+msgid "mount table full"
+msgstr "掛載表已滿"
-#: misc-utils/findmnt.c:1135
-#, fuzzy
-msgid " -P, --pairs use key=\"value\" output format\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: libmount/src/context_mount.c:1649
+#, fuzzy, c-format
+msgid "can't read superblock on %s"
+msgstr "%s：無法讀取超區塊"
-#: misc-utils/findmnt.c:1136
-#, fuzzy
-msgid " -r, --raw use raw output format\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: libmount/src/context_mount.c:1656
+#, fuzzy, c-format
+msgid "unknown filesystem type '%s'"
+msgstr "不明檔案系統型態『%s』"
-#: misc-utils/findmnt.c:1137
-#, fuzzy
-msgid " -t, --types <list> limit the set of filesystems by FS types\n"
-msgstr " l 列出已知檔案系統類型"
+#: libmount/src/context_mount.c:1659
+#, fuzzy, c-format
+msgid "unknown filesystem type"
+msgstr "不明檔案系統型態『%s』"
-#: misc-utils/findmnt.c:1139
+#: libmount/src/context_mount.c:1668
#, fuzzy, c-format
-msgid ""
-" -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
-" -R, --submounts print all submounts for the matching filesystems\n"
-" -S, --source <string> the device to mount (by name, maj:min, \n"
-" LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
-" -T, --target <string> the mountpoint to use\n"
-msgstr ""
-" -v, --nofsroot 不列印 [/dir] 用於繫結或 btrfs 掛載\n"
-" -R, --submounts 列印所有 submounts 用於匹配檔案系統\n"
-" -S, --source <string> 裝置到掛載 (依名稱，maj：最小，\n"
-" 標貼=, UUID=, PARTUUID=, PARTLABEL=)\n"
-" -T, --target<字串> mountpoint 以使用\n"
+msgid "%s is not a block device, and stat(2) fails?"
+msgstr "%s 並非區塊裝置，而stat (2) 失敗？"
-#: misc-utils/findmnt.c:1149 sys-utils/lscpu.c:1370
+#: libmount/src/context_mount.c:1671
#, fuzzy, c-format
-msgid ""
-"\n"
-"Available columns:\n"
+msgid "the kernel does not recognize %s as a block device; maybe \"modprobe driver\" is necessary"
msgstr ""
-"\n"
-"可用欄位：\n"
-
-#: misc-utils/findmnt.c:1249
-#, c-format
-msgid "unknown direction '%s'"
-msgstr "不明方向「%s」"
-
-#: misc-utils/findmnt.c:1318
-#, fuzzy
-msgid "invalid TID argument"
-msgstr "無效的 TID 引數"
-
-#: misc-utils/findmnt.c:1375
-#, fuzzy
-msgid "--poll accepts only one file, but more specified by --tab-file"
-msgstr "--poll 接受只有一個檔案，但是更多指定的由 --tab-file"
-
-#: misc-utils/findmnt.c:1379
-msgid ""
-"options --target and --source can't be used together with command line "
-"element that is not an option"
-msgstr "選項 --target 和 --source 無法與不是選項的命令列元素一起使用"
-
-#: misc-utils/findmnt.c:1424
-msgid "failed to initialize libmount cache"
-msgstr "初始化 libmount 快取時失敗"
+"內核不識別 %s 做為區塊裝置\n"
+" (也許『modprobe 驅動程式』?)"
-#: misc-utils/findmnt.c:1447
+#: libmount/src/context_mount.c:1674
#, fuzzy, c-format
-msgid "%s column is requested, but --poll is not enabled"
-msgstr "%s 欄被要求的，但是 --poll 未被已啟用"
+msgid "%s is not a block device; try \"-o loop\""
+msgstr "%s 並非區塊裝置 (也許嘗試『-o 迴圈』?)"
-#: misc-utils/getopt.c:219
+#: libmount/src/context_mount.c:1676
#, fuzzy, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "嘗試『%s --help』以獲得更多資訊。\n"
-
-#: misc-utils/getopt.c:288
-msgid "empty long option after -l or --long argument"
-msgstr "-l 或 --long 引數之後出現空的長選項"
-
-#: misc-utils/getopt.c:309
-msgid "unknown shell after -s or --shell argument"
-msgstr "-s 或 --shell 引數之後出現不明的命令殼名稱"
+msgid "%s is not a block device"
+msgstr " %s 並非區塊裝置"
-#: misc-utils/getopt.c:317
+#: libmount/src/context_mount.c:1683
#, fuzzy, c-format
-msgid ""
-" %1$s optstring parameters\n"
-" %1$s [options] [--] optstring parameters\n"
-" %1$s [options] -o|--options optstring [options] [--] parameters\n"
-msgstr ""
-" %1$s optstring 參數\n"
-" %1$s [選項] [--] optstring 參數\n"
-" %1$s [選項] -o|--options optstring [選項] [--] 參數\n"
-
-#: misc-utils/getopt.c:323
-#, fuzzy
-msgid ""
-" -a, --alternative Allow long options starting with single -\n"
-msgstr " -a, --alternative 允許長選項開始與單一 -\n"
+msgid "%s is not a valid block device"
+msgstr "%s 並非有效區塊裝置"
-#: misc-utils/getopt.c:324
-#, fuzzy
-msgid " -h, --help This small usage guide\n"
-msgstr " -h, --help 這個小用法指導\n"
+#: libmount/src/context_mount.c:1691
+#, fuzzy, c-format
+msgid "cannot mount %s read-only"
+msgstr "無法掛載 %s 唯讀"
-#: misc-utils/getopt.c:325
-#, fuzzy
-msgid " -l, --longoptions <longopts> Long options to be recognized\n"
-msgstr " -l, --longoptions <longopts> 長選項為辨識的\n"
+#: libmount/src/context_mount.c:1693
+#, fuzzy, c-format
+msgid "%s is write-protected but explicit read-write mode requested"
+msgstr "%s 被防止寫入的但是明確的『-w』旗標給定的"
-#: misc-utils/getopt.c:326
-#, fuzzy
-msgid ""
-" -n, --name <progname> The name under which errors are reported\n"
-msgstr " -n, --name <progname> 名稱之下該項錯誤被報告\n"
+#: libmount/src/context_mount.c:1695
+#, fuzzy, c-format
+msgid "cannot remount %s read-write, is write-protected"
+msgstr "無法 remount %s 可讀可寫，被防止寫入的"
-#: misc-utils/getopt.c:327
-#, fuzzy
-msgid " -o, --options <optstring> Short options to be recognized\n"
-msgstr " -o, --options <optstring> 短選項為辨識的\n"
+#: libmount/src/context_mount.c:1697
+#, fuzzy, c-format
+msgid "bind %s failed"
+msgstr "%s 失敗。\n"
-#: misc-utils/getopt.c:328
-#, fuzzy
-msgid " -q, --quiet Disable error reporting by getopt(3)\n"
-msgstr " -q, --quiet 停用錯誤報告由 getopt (3)\n"
+#: libmount/src/context_mount.c:1708
+#, fuzzy, c-format
+msgid "no medium found on %s"
+msgstr "找不到任何中於 %s"
-#: misc-utils/getopt.c:329
-#, fuzzy
-msgid " -Q, --quiet-output No normal output\n"
-msgstr " -Q, --quiet-output 沒有一般輸出\n"
+#: libmount/src/context_mount.c:1715
+#, fuzzy, c-format
+msgid "cannot mount; probably corrupted filesystem on %s"
+msgstr "將不會試著於「%s」製作檔案系統"
-#: misc-utils/getopt.c:330
-#, fuzzy
-msgid " -s, --shell <shell> Set shell quoting conventions\n"
-msgstr " -s, --shell <shell> 設定命令殼引言慣例\n"
+#: libmount/src/context_umount.c:1257 libmount/src/context_umount.c:1311
+#, fuzzy, c-format
+msgid "not mounted"
+msgstr "%s：無法掛載"
-#: misc-utils/getopt.c:331
-#, fuzzy
-msgid " -T, --test Test for getopt(1) version\n"
-msgstr " -T, --test 測試用於 getopt (1) 版本\n"
+#: libmount/src/context_umount.c:1273
+#, fuzzy, c-format
+msgid "umount failed: %m"
+msgstr "%s：umount 失敗"
-#: misc-utils/getopt.c:332
-#, fuzzy
-msgid " -u, --unquoted Do not quote the output\n"
-msgstr " -u, --unquote 不引言輸出\n"
+#: libmount/src/context_umount.c:1282
+#, fuzzy, c-format
+msgid "filesystem was unmounted, but failed to update userspace mount table"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/getopt.c:333
-#, fuzzy
-msgid " -V, --version Output version information\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: libmount/src/context_umount.c:1288
+#, fuzzy, c-format
+msgid "filesystem was unmounted, but failed to switch namespace back"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/getopt.c:383 misc-utils/getopt.c:442
-msgid "missing optstring argument"
-msgstr "缺少選項字串引數"
+#: libmount/src/context_umount.c:1295
+#, fuzzy, c-format
+msgid "filesystem was unmounted, but any subsequent operation failed: %m"
+msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
-#: misc-utils/getopt.c:437
-msgid "internal error, contact the author."
-msgstr "內部錯誤，請與作者連絡。"
+#: libmount/src/context_umount.c:1308
+#, fuzzy, c-format
+msgid "invalid block device"
+msgstr "%s：無效的區塊裝置"
-#: misc-utils/kill.c:205 misc-utils/kill.c:213
+#: libmount/src/context_umount.c:1314
#, fuzzy, c-format
-msgid "unknown signal: %s"
-msgstr "%s：不明信號 %s\n"
+msgid "can't write superblock"
+msgstr "%s：無法寫入超區塊"
-#: misc-utils/kill.c:248
-#, fuzzy
-msgid "invalid sigval argument"
-msgstr "無效的 sigval 引數"
+#: libmount/src/context_umount.c:1317
+#, fuzzy, c-format
+msgid "target is busy"
+msgstr "%s 忙碌中"
-#: misc-utils/kill.c:304
+#: libmount/src/context_umount.c:1320
#, fuzzy, c-format
-msgid "cannot find process \"%s\""
-msgstr "%s：找不到行程「%s」\n"
+msgid "no mount point specified"
+msgstr "沒有 mountpoint 指定的。"
-#: misc-utils/kill.c:382
+#: libmount/src/context_umount.c:1323
#, fuzzy, c-format
-msgid "unknown signal %s; valid signals:"
-msgstr "%s：不明信號 %s; 有效信號：\n"
+msgid "must be superuser to unmount"
+msgstr "%s：必須是系統管理者到 umount"
-#: misc-utils/kill.c:461
+#: libmount/src/context_umount.c:1326
#, fuzzy, c-format
-msgid " %s [options] <pid|name> [...]\n"
-msgstr " %s [選項] <device> [...]\n"
+msgid "block devices are not permitted on filesystem"
+msgstr "%s：區塊裝置無法允許的於 fs"
-#: misc-utils/kill.c:463
-msgid ""
-" -a, --all do not restrict the name-to-pid conversion to "
-"processes\n"
-" with the same uid as the present process\n"
-msgstr ""
+#: libmount/src/context_umount.c:1329
+#, fuzzy, c-format
+msgid "umount(2) system call failed: %m"
+msgstr "掛載 (2) 失敗"
-#: misc-utils/kill.c:465
-msgid " -s, --signal <sig> send specified signal\n"
-msgstr ""
+#: lib/plymouth-ctrl.c:73
+#, fuzzy
+msgid "cannot open UNIX socket"
+msgstr "無法開啟 %s"
-#: misc-utils/kill.c:466
+#: lib/plymouth-ctrl.c:79
#, fuzzy
-msgid " -q, --queue <sig> use sigqueue(2) rather than kill(2)\n"
-msgstr " -q, --queue-id <id> 移除訊息佇列由識別號\n"
+msgid "cannot set option for UNIX socket"
+msgstr "無法設定逾時用於 %s"
-#: misc-utils/kill.c:467
+#: lib/plymouth-ctrl.c:90
#, fuzzy
-msgid " -p, --pid print pids without signaling them\n"
-msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+msgid "cannot connect on UNIX socket"
+msgstr "無法開啟 %s"
-#: misc-utils/kill.c:468
-msgid " -l, --list [=<signal>] list signal names, or convert one to a name\n"
+#: lib/plymouth-ctrl.c:128
+#, c-format
+msgid "the plymouth request %c is not implemented"
msgstr ""
-#: misc-utils/kill.c:469
-msgid " -L, --table list signal names and numbers\n"
+#: lib/randutils.c:191
+msgid "getrandom() function"
msgstr ""
-#: misc-utils/kill.c:494
-#, fuzzy, c-format
-msgid "sending signal to %s failed"
-msgstr "重新命名 %s 到 %s 失敗"
+#: lib/randutils.c:204
+msgid "libc pseudo-random functions"
+msgstr ""
-#: misc-utils/logger.c:115
+#: lib/shells.c:36
#, fuzzy, c-format
-msgid "unknown facility name: %s."
-msgstr "不明機能名稱：%s。"
+msgid "Cannot parse shells files: %s"
+msgstr "無法開啟鎖定檔案 %s"
-#: misc-utils/logger.c:124
-#, fuzzy, c-format
-msgid "unknown priority name: %s."
-msgstr "不明優先權名稱：%s。"
+#: lib/shells.c:44
+#, c-format
+msgid "Cannot evaluate entries in shells files: %s"
+msgstr ""
-#: misc-utils/logger.c:134
-#, fuzzy, c-format
-msgid "openlog %s: pathname too long"
-msgstr "openlog %s：路徑名稱太長"
+#: lib/swapprober.c:22 lib/swapprober.c:35
+#, c-format
+msgid "%s: unable to probe device"
+msgstr "%s：無法探查裝置"
-#: misc-utils/logger.c:156
+#: lib/swapprober.c:37
#, fuzzy, c-format
-msgid "socket %s"
-msgstr "通訊端 %s"
+msgid "%s: ambiguous probing result; use wipefs(8)"
+msgstr "%s：探查結果產生矛盾，使用 wipefs(8)"
-#: misc-utils/logger.c:185
-#, fuzzy, c-format
-msgid "failed to resolve name %s port %s: %s"
-msgstr "掛載移動 %s 到 %s 時失敗"
+#: lib/swapprober.c:39
+#, c-format
+msgid "%s: not a valid swap partition"
+msgstr "%s：不是有效的交換分割區"
+
+#: lib/swapprober.c:46
+#, c-format
+msgid "%s: unsupported swap version '%s'"
+msgstr "%s：不受支援的交換版本「%s」"
+
+#: lib/timeutils.c:513
+msgid "format_iso_time: buffer overflow."
+msgstr ""
-#: misc-utils/logger.c:202
+#: lib/timeutils.c:531 lib/timeutils.c:555
#, fuzzy, c-format
-msgid "failed to connect to %s port %s"
-msgstr "æ\8e\9bè¼\89移å\8b\95 %s å\88° %s æ\99\82失æ\95\97"
+msgid "time %<PRId64> is out of range."
+msgstr "æ\95¸å\80¼è¶\85å\87ºç¯\84å\9c\8dã\80\82\n"
-#: misc-utils/logger.c:238
+#: login-utils/chfn.c:91 login-utils/chsh.c:70 login-utils/lslogins.c:1442
#, fuzzy, c-format
-msgid " %s [options] [<message>]\n"
-msgstr " %s [選項] [訊息]\n"
+msgid " %s [options] [<username>]\n"
+msgstr " %s [選項] [使用者名稱]\n"
-#: misc-utils/logger.c:241
+#: login-utils/chfn.c:94
#, fuzzy
-msgid " -T, --tcp use TCP only\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid "Change your finger information.\n"
+msgstr "修改 %s 的 finger 資訊。\n"
-#: misc-utils/logger.c:242
+#: login-utils/chfn.c:97
#, fuzzy
-msgid " -d, --udp use UDP only\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid " -f, --full-name <full-name> real name\n"
+msgstr " -f, --full-name <full-name> 真實名稱\n"
-#: misc-utils/logger.c:243
+#: login-utils/chfn.c:98
#, fuzzy
-msgid " -i, --id log the process ID too\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid " -o, --office <office> office number\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: misc-utils/logger.c:244
+#: login-utils/chfn.c:99
#, fuzzy
-msgid " -f, --file <file> log the contents of this file\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+msgid " -p, --office-phone <phone> office phone number\n"
+msgstr " -p, --office-phone <phone> 辦公室電話號碼\n"
-#: misc-utils/logger.c:245
-msgid " -n, --server <name> write to this remote syslog server\n"
-msgstr ""
+#: login-utils/chfn.c:100
+#, fuzzy
+msgid " -h, --home-phone <phone> home phone number\n"
+msgstr " -h, --home-phone <phone> 個人資料夾電話號碼\n"
+
+#: login-utils/chfn.c:118
+#, fuzzy, c-format
+msgid "field %s is too long"
+msgstr "欄位 %s 太長"
-#: misc-utils/logger.c:246
-msgid " -P, --port <number> use this UDP port\n"
+#: login-utils/chfn.c:122 login-utils/chsh.c:182
+#, c-format
+msgid "%s: has illegal characters"
msgstr ""
-#: misc-utils/logger.c:247
-msgid " -p, --priority <prio> mark given message with this priority\n"
+#: login-utils/chfn.c:151 login-utils/chfn.c:157 login-utils/chfn.c:163
+#: login-utils/chfn.c:169
+#, c-format
+msgid "login.defs forbids setting %s"
msgstr ""
-#: misc-utils/logger.c:248
-msgid ""
-" --prio-prefix look for a prefix on every line read from stdin\n"
+#: login-utils/chfn.c:157 login-utils/chfn.c:159 login-utils/chfn.c:318
+msgid "Office"
+msgstr "辦公室"
+
+#: login-utils/chfn.c:163 login-utils/chfn.c:165 login-utils/chfn.c:320
+msgid "Office Phone"
+msgstr "辦公室電話"
+
+#: login-utils/chfn.c:169 login-utils/chfn.c:171 login-utils/chfn.c:322
+msgid "Home Phone"
+msgstr "住家電話"
+
+#: login-utils/chfn.c:189 login-utils/chsh.c:135
+msgid "cannot handle multiple usernames"
msgstr ""
-#: misc-utils/logger.c:249
+#: login-utils/chfn.c:240
#, fuzzy
-msgid " -s, --stderr output message to standard error as well\n"
-msgstr " -s 列印訊息到標準輸出\n"
+msgid "Aborted."
+msgstr "放棄。"
-#: misc-utils/logger.c:250
-msgid " -t, --tag <tag> mark every line with this tag\n"
+#: login-utils/chfn.c:304
+#, c-format
+msgid "%s: CHFN_RESTRICT has unexpected value: %s"
msgstr ""
-#: misc-utils/logger.c:251
-msgid " -u, --socket <socket> write to this Unix socket\n"
+#: login-utils/chfn.c:306
+#, c-format
+msgid "%s: CHFN_RESTRICT does not allow any changes"
msgstr ""
-#: misc-utils/logger.c:307
+#: login-utils/chfn.c:388
+#, c-format
+msgid "Finger information *NOT* changed. Try again later.\n"
+msgstr "Finger 資訊 *未被* 變更。請稍後再嘗試。\n"
+
+#: login-utils/chfn.c:392
+#, c-format
+msgid "Finger information changed.\n"
+msgstr "Finger 資訊已變更。\n"
+
+#: login-utils/chfn.c:418 login-utils/chsh.c:219 sys-utils/unshare.c:426
#, fuzzy, c-format
-msgid "file %s"
-msgstr "æª\94æ¡\88 %s"
+msgid "you (user %d) don't exist."
+msgstr "æ\82¨ (使ç\94¨è\80\85 %d) ä¸\8då\98å\9c¨ã\80\82"
-#: misc-utils/look.c:368
+#: login-utils/chfn.c:424 login-utils/chsh.c:224 login-utils/libuser.c:59
#, fuzzy, c-format
-msgid " %s [options] string [file]\n"
-msgstr " %s [選項] 字串 [檔案]\n"
+msgid "user \"%s\" does not exist."
+msgstr "使用者「%s」不存在。"
-#: misc-utils/look.c:371
+#: login-utils/chfn.c:430 login-utils/chsh.c:230
#, fuzzy
-msgid ""
-" -a, --alternative use alternative dictionary\n"
-" -d, --alphanum compare only alphanumeric characters\n"
-" -f, --ignore-case ignore case differences when comparing\n"
-" -t, --terminate <char> define string termination character\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-" -a, --alternative 使用交替字典\n"
-" -d, --alphanum 比較只有 alpha 數字字元\n"
-" -f, --ignore-case 忽略時比較\n"
-" -t, --terminate <char> 定義字串終止字元\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+msgid "can only change local entries"
+msgstr "只能變更本地條目"
-#: misc-utils/lsblk.c:119
-#, fuzzy
-msgid "device name"
-msgstr "裝置名稱"
+#: login-utils/chfn.c:439
+#, fuzzy, c-format
+msgid "%s is not authorized to change the finger info of %s"
+msgstr "%s 未被授權到變更手指資訊的 %s"
-#: misc-utils/lsblk.c:120
-#, fuzzy
-msgid "internal kernel device name"
-msgstr "內部內核裝置名稱"
+#: login-utils/chfn.c:441 login-utils/chsh.c:240
+msgid "Unknown user context"
+msgstr "不明的使用者相關環境"
-#: misc-utils/lsblk.c:121
-#, fuzzy
-msgid "internal parent kernel device name"
-msgstr "內部內核裝置名稱"
+#: login-utils/chfn.c:446 login-utils/chsh.c:245
+#, fuzzy, c-format
+msgid "can't set default context for %s"
+msgstr "無法設定預設語境用於 %s"
-#: misc-utils/lsblk.c:124
+#: login-utils/chfn.c:457
#, fuzzy
-msgid "where the device is mounted"
-msgstr "位置裝置被掛載"
+msgid "running UID doesn't match UID of user we're altering, change denied"
+msgstr "執行中 UID 不匹配 UID 的使用者我們正在改變，命令殼變更拒絕"
-#: misc-utils/lsblk.c:125
-#, fuzzy
-msgid "filesystem LABEL"
-msgstr "檔案系統標貼"
+#: login-utils/chfn.c:461
+#, c-format
+msgid "Changing finger information for %s.\n"
+msgstr "修改 %s 的 finger 資訊。\n"
-#: misc-utils/lsblk.c:128
-#, fuzzy
-msgid "partition LABEL"
-msgstr "分割標貼"
+#: login-utils/chfn.c:475
+#, c-format
+msgid "Finger information not changed.\n"
+msgstr "Finger 資訊沒有變更。\n"
-#: misc-utils/lsblk.c:131
+#: login-utils/chsh.c:73
#, fuzzy
-msgid "read-ahead of the device"
-msgstr "預先讀取的的裝置"
+msgid "Change your login shell.\n"
+msgstr "變更 %s 的 shell。\n"
-#: misc-utils/lsblk.c:132 sys-utils/losetup.c:68
+#: login-utils/chsh.c:76
#, fuzzy
-msgid "read-only device"
-msgstr "唯讀裝置"
+msgid " -s, --shell <shell> specify login shell\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: misc-utils/lsblk.c:133
+#: login-utils/chsh.c:77
#, fuzzy
-msgid "removable device"
-msgstr "可移除的裝置"
+msgid " -l, --list-shells print list of shells and exit\n"
+msgstr " -l, --list-shells 列印命令殼清單的然後離開\n"
-#: misc-utils/lsblk.c:134
+#: login-utils/chsh.c:176
#, fuzzy
-msgid "rotational device"
-msgstr "rotational 裝置"
+msgid "shell must be a full path name"
+msgstr "命令殼必須是完整路徑名稱"
-#: misc-utils/lsblk.c:135
-msgid "adds randomness"
-msgstr ""
+#: login-utils/chsh.c:178
+#, fuzzy, c-format
+msgid "\"%s\" does not exist"
+msgstr "「%s」不存在"
-#: misc-utils/lsblk.c:136
-#, fuzzy
-msgid "device identifier"
-msgstr "裝置識別碼"
+#: login-utils/chsh.c:180
+#, fuzzy, c-format
+msgid "\"%s\" is not executable"
+msgstr "「%s」不是可執行檔案"
-#: misc-utils/lsblk.c:137
-msgid "disk serial number"
+#: login-utils/chsh.c:186
+#, fuzzy, c-format
+msgid "Warning: \"%s\" is not listed in %s."
+msgstr "警告：「%s」未被清單在中 %s。"
+
+#: login-utils/chsh.c:190 login-utils/chsh.c:194
+#, fuzzy, c-format
+msgid ""
+"\"%s\" is not listed in %s.\n"
+"Use %s -l to see list."
msgstr ""
+"「%s」未被清單在中 %s。\n"
+"使用 %s -l 到參看清單。"
-#: misc-utils/lsblk.c:138
-#, fuzzy
-msgid "size of the device"
-msgstr "大小的裝置"
+#: login-utils/chsh.c:239
+#, fuzzy, c-format
+msgid "%s is not authorized to change the shell of %s"
+msgstr "%s 未被授權到變更命令殼的 %s"
-#: misc-utils/lsblk.c:139
+#: login-utils/chsh.c:264
#, fuzzy
-msgid "state of the device"
-msgstr "狀態的裝置"
+msgid "running UID doesn't match UID of user we're altering, shell change denied"
+msgstr "執行中 UID 不匹配 UID 的使用者我們正在改變，命令殼變更拒絕"
-#: misc-utils/lsblk.c:140
-#, fuzzy
-msgid "user name"
-msgstr "使用者名稱"
+#: login-utils/chsh.c:269
+#, fuzzy, c-format
+msgid "your shell is not in %s, shell change denied"
+msgstr "您的命令殼不是在中 %s，命令殼變更拒絕"
-#: misc-utils/lsblk.c:141
-#, fuzzy
-msgid "group name"
-msgstr "群組名稱"
+#: login-utils/chsh.c:273
+#, c-format
+msgid "Changing shell for %s.\n"
+msgstr "變更 %s 的 shell。\n"
-#: misc-utils/lsblk.c:142
-#, fuzzy
-msgid "device node permissions"
-msgstr "裝置節點權限"
+#: login-utils/chsh.c:281
+msgid "New shell"
+msgstr "新命令殼"
-#: misc-utils/lsblk.c:143
+#: login-utils/chsh.c:289
#, fuzzy
-msgid "alignment offset"
-msgstr "å°\8dé½\8aå\81\8f移"
+msgid "Shell not changed."
+msgstr "å\91½ä»¤æ®¼ç\84¡æ³\95è®\8aæ\9b´ã\80\82"
-#: misc-utils/lsblk.c:144
+#: login-utils/chsh.c:294
#, fuzzy
-msgid "minimum I/O size"
-msgstr "最小 I/O 大小"
+msgid "Shell *NOT* changed. Try again later."
+msgstr ""
+"setpwnam 失敗\n"
+"命令殼 * 無法 * 變更。 稍後再試一次。"
-#: misc-utils/lsblk.c:145
+#: login-utils/chsh.c:298
#, fuzzy
-msgid "optimal I/O size"
-msgstr "最佳化 I/O 大小"
+msgid ""
+"setpwnam failed\n"
+"Shell *NOT* changed. Try again later."
+msgstr ""
+"setpwnam 失敗\n"
+"命令殼 * 無法 * 變更。 稍後再試一次。"
-#: misc-utils/lsblk.c:146
-#, fuzzy
-msgid "physical sector size"
-msgstr "實體磁區大小"
+#: login-utils/chsh.c:302
+#, c-format
+msgid "Shell changed.\n"
+msgstr "shell 已變更。\n"
-#: misc-utils/lsblk.c:147
-#, fuzzy
-msgid "logical sector size"
-msgstr "邏輯區大小"
+#: login-utils/islocal.c:95
+#, fuzzy, c-format
+msgid "Usage: %s <passwordfile> <username>...\n"
+msgstr "用法：%s [選項] [檔案...]\n"
-#: misc-utils/lsblk.c:148
-#, fuzzy
-msgid "I/O scheduler name"
-msgstr "I/O 排程程式名稱"
+#: login-utils/last.c:175 login-utils/lslogins.c:1433 sys-utils/dmesg.c:1342
+#: sys-utils/lsipc.c:283
+#, fuzzy, c-format
+msgid "unknown time format: %s"
+msgstr "不明動作：%s"
-#: misc-utils/lsblk.c:149
-#, fuzzy
-msgid "request queue size"
-msgstr "要求佇列大小"
+#: login-utils/last.c:439 login-utils/last.c:450 login-utils/last.c:901
+msgid "preallocation size exceeded"
+msgstr ""
-#: misc-utils/lsblk.c:150
-#, fuzzy
-msgid "device type"
-msgstr "裝置類型"
+#: login-utils/last.c:568
+#, fuzzy, c-format
+msgid " %s [options] [<username>...] [<tty>...]\n"
+msgstr " %s [選項] <user> [<ttyname>]\n"
-#: misc-utils/lsblk.c:151
-#, fuzzy
-msgid "discard alignment offset"
-msgstr "捨棄對齊偏移"
+#: login-utils/last.c:571
+msgid "Show a listing of last logged in users.\n"
+msgstr ""
-#: misc-utils/lsblk.c:152
-#, fuzzy
-msgid "discard granularity"
-msgstr "捨棄顆粒性"
+#: login-utils/last.c:574
+msgid " -<number> how many lines to show\n"
+msgstr ""
+
+#: login-utils/last.c:575
+msgid " -a, --hostlast display hostnames in the last column\n"
+msgstr ""
+
+#: login-utils/last.c:576
+msgid " -d, --dns translate the IP number back into a hostname\n"
+msgstr ""
-#: misc-utils/lsblk.c:153
+#: login-utils/last.c:578
+#, fuzzy, c-format
+msgid " -f, --file <file> use a specific file instead of %s\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#: login-utils/last.c:579
+msgid " -F, --fulltimes print full login and logout times and dates\n"
+msgstr ""
+
+#: login-utils/last.c:580
#, fuzzy
-msgid "discard max bytes"
-msgstr "捨棄最大位元組"
+msgid " -i, --ip display IP numbers in numbers-and-dots notation\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: login-utils/last.c:581
+msgid " -n, --limit <number> how many lines to show\n"
+msgstr ""
-#: misc-utils/lsblk.c:154
+#: login-utils/last.c:582
#, fuzzy
-msgid "discard zeroes data"
-msgstr "捨棄零資料"
+msgid " -R, --nohostname don't display the hostname field\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
-#: misc-utils/lsblk.c:155
+#: login-utils/last.c:583
#, fuzzy
-msgid "write same max bytes"
-msgstr "捨棄最大位元組"
+msgid " -s, --since <time> display the lines since the specified time\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: misc-utils/lsblk.c:156
+#: login-utils/last.c:584
#, fuzzy
-msgid "unique storage identifier"
-msgstr "唯一貯藏體識別碼"
+msgid " -t, --until <time> display the lines until the specified time\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: misc-utils/lsblk.c:157
-msgid "Host:Channel:Target:Lun for SCSI"
+#: login-utils/last.c:585
+msgid " -p, --present <time> display who were present at the specified time\n"
msgstr ""
-#: misc-utils/lsblk.c:158
+#: login-utils/last.c:586
#, fuzzy
-msgid "device transport type"
-msgstr "裝置類型"
+msgid " -w, --fullnames display full user and domain names\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: misc-utils/lsblk.c:159
-#, fuzzy
-msgid "device revision"
-msgstr "裝置節點權限"
+#: login-utils/last.c:587
+msgid " -x, --system display system shutdown entries and run level changes\n"
+msgstr ""
-#: misc-utils/lsblk.c:160
-#, fuzzy
-msgid "device vendor"
-msgstr "裝置名稱"
+#: login-utils/last.c:588
+msgid ""
+" --time-format <format> show timestamps in the specified <format>:\n"
+" notime|short|full|iso\n"
+msgstr ""
-#: misc-utils/lsblk.c:979
+#: login-utils/last.c:902
#, fuzzy, c-format
-msgid "%s: failed to get device path"
-msgstr "%s：無法提取裝置路徑"
+msgid ""
+"\n"
+"%s begins %s\n"
+msgstr ""
+"\n"
+"wtmp 開始 %s"
-#: misc-utils/lsblk.c:986
-#, fuzzy, c-format
-msgid "%s: unknown device name"
-msgstr "%s：不明裝置名稱"
+#: login-utils/last.c:1011 term-utils/scriptlive.c:85
+#: term-utils/scriptlive.c:89 term-utils/scriptreplay.c:80
+#: term-utils/scriptreplay.c:84 text-utils/more.c:285 text-utils/more.c:291
+#, fuzzy
+msgid "failed to parse number"
+msgstr "剖析列號的時失敗"
-#: misc-utils/lsblk.c:992 misc-utils/lsblk.c:999
+#: login-utils/last.c:1032 login-utils/last.c:1037 login-utils/last.c:1042
+#: sys-utils/dmesg.c:1560 sys-utils/dmesg.c:1566 sys-utils/rtcwake.c:511
#, fuzzy, c-format
-msgid "%s: failed to initialize sysfs handler"
-msgstr "%s：無法初始化 sysfs 處理常式"
+msgid "invalid time value \"%s\""
+msgstr "無效的逾時引數"
+
+#: login-utils/libuser.c:29 login-utils/libuser.c:31
+msgid "Couldn't drop group privileges"
+msgstr ""
-#: misc-utils/lsblk.c:1022
+#: login-utils/libuser.c:47
#, fuzzy, c-format
-msgid "%s: failed to get dm name"
-msgstr "%s：無法提取 dm 名稱"
+msgid "libuser initialization failed: %s."
+msgstr "群組初始化失敗：%m"
-#: misc-utils/lsblk.c:1063
+#: login-utils/libuser.c:52
#, fuzzy
-msgid "failed to open device directory in sysfs"
-msgstr "開啟裝置目錄在中 sysfs 時失敗"
+msgid "changing user attribute failed"
+msgstr "變更 %s 模式失敗"
-#: misc-utils/lsblk.c:1231
-#, fuzzy, c-format
-msgid "%s: failed to compose sysfs path"
-msgstr "撰寫 sysfs 路徑用於 %s 時失敗"
+#: login-utils/libuser.c:66
+#, c-format
+msgid "user attribute not changed: %s"
+msgstr ""
-#: misc-utils/lsblk.c:1237
-#, fuzzy, c-format
-msgid "%s: failed to read link"
-msgstr "%s：無法讀取鏈結"
+#: login-utils/login.c:417
+#, c-format
+msgid "You have new mail.\n"
+msgstr "您有新郵件。\n"
+
+#: login-utils/login.c:419
+#, c-format
+msgid "You have mail.\n"
+msgstr "您有郵件。\n"
-#: misc-utils/lsblk.c:1260
+#: login-utils/login.c:442
#, fuzzy, c-format
-msgid "%s: failed to get sysfs name"
-msgstr "%s：無法提取 dm 名稱"
+msgid "FATAL: can't reopen tty: %m"
+msgstr "嚴重：無法重新開啟 tty：%m"
+
+#: login-utils/login.c:448
+#, c-format
+msgid "FATAL: %s is not a terminal"
+msgstr "嚴重：%s 並非終端機"
-#: misc-utils/lsblk.c:1269
+#: login-utils/login.c:467
#, fuzzy, c-format
-msgid "%s: failed to get whole-disk device number"
-msgstr "%s：無法提取 whole-disk 裝置編號"
+msgid "chown (%s, %u, %u) failed: %m"
+msgstr "chown (%s，%lu，%lu) 失敗：%m"
-#: misc-utils/lsblk.c:1321 misc-utils/lsblk.c:1323 misc-utils/lsblk.c:1348
-#: misc-utils/lsblk.c:1350
+#: login-utils/login.c:472
#, fuzzy, c-format
-msgid "failed to parse list '%s'"
-msgstr "剖析清單『%s 時失敗』"
+msgid "chmod (%s, %u) failed: %m"
+msgstr "chmod (%s，%u) 失敗：%m"
-#. TRANSLATORS: The standard value for %d is 256.
-#: misc-utils/lsblk.c:1328
+#: login-utils/login.c:535
+msgid "FATAL: bad tty"
+msgstr "嚴重：不當的 tty"
+
+#: login-utils/login.c:551
#, fuzzy, c-format
-msgid "the list of excluded devices is too large (limit is %d devices)"
-msgstr "排除的裝置清單的太大 (限制是 %d 裝置)"
+msgid "TIOCGWINSZ ioctl failed: %m"
+msgstr "TIOCSCTTY：ioctl 失敗"
-#. TRANSLATORS: The standard value for %d is 256.
-#: misc-utils/lsblk.c:1355
+#: login-utils/login.c:559
#, fuzzy, c-format
-msgid "the list of included devices is too large (limit is %d devices)"
-msgstr "å\8c\85å\90«ç\9a\84è£\9dç½®æ¸\85å\96®ç\9a\84太大 (é\99\90å\88¶æ\98¯ %d è£\9dç½®)"
+msgid "FATAL: %s: change permissions failed: %m"
+msgstr "å\9a´é\87\8dï¼\9a%sï¼\9aè®\8aæ\9b´æ¬\8aé\99\90失æ\95\97ï¼\9a%m"
-#: misc-utils/lsblk.c:1367 sys-utils/wdctl.c:169
+#: login-utils/login.c:588
#, fuzzy, c-format
-msgid " %s [options] [<device> ...]\n"
-msgstr " %s [選項] [<device>...]\n"
+msgid "TIOCSWINSZ ioctl failed: %m"
+msgstr "TIOCSCTTY：ioctl 失敗"
-#: misc-utils/lsblk.c:1369
-#, fuzzy
-msgid " -a, --all print all devices\n"
-msgstr " -a, --all 查詢所有原始裝置\n"
+#: login-utils/login.c:694
+#, c-format
+msgid "Last login: %.*s "
+msgstr "上次登入：%.*s "
-#: misc-utils/lsblk.c:1371
+#: login-utils/login.c:698
+#, fuzzy, c-format
+msgid "from %s\n"
+msgstr "從 %.*s\n"
+
+#: login-utils/login.c:701
+#, fuzzy, c-format
+msgid "on %s\n"
+msgstr "於 %.*s\n"
+
+#: login-utils/login.c:717
#, fuzzy
-msgid " -d, --nodeps don't print slaves or holders\n"
-msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+msgid "write lastlog failed"
+msgstr "寫入 lastlog 失敗"
-#: misc-utils/lsblk.c:1372
-msgid " -D, --discard print discard capabilities\n"
-msgstr ""
+#: login-utils/login.c:808
+#, c-format
+msgid "DIALUP AT %s BY %s"
+msgstr "由 %2$s 於 %1$s 撥號進入"
+
+#: login-utils/login.c:813
+#, c-format
+msgid "ROOT LOGIN ON %s FROM %s"
+msgstr "從 %2$s 於 %1$s 登入為系統管理員"
+
+#: login-utils/login.c:816
+#, c-format
+msgid "ROOT LOGIN ON %s"
+msgstr "系統管理員於 %s 登入"
-#: misc-utils/lsblk.c:1373
+#: login-utils/login.c:819
+#, c-format
+msgid "LOGIN ON %s BY %s FROM %s"
+msgstr "由 %2$s 從 %3$s 於 %1$s 登入"
+
+#: login-utils/login.c:822
+#, c-format
+msgid "LOGIN ON %s BY %s"
+msgstr "由 %2$s 於 %1$s 登入"
+
+#: login-utils/login.c:857
+msgid "login: "
+msgstr "登入："
+
+#: login-utils/login.c:893
+#, fuzzy, c-format
+msgid "PAM failure, aborting: %s"
+msgstr "PAM 失敗，放棄：%s"
+
+#: login-utils/login.c:894
+#, c-format
+msgid "Couldn't initialize PAM: %s"
+msgstr "無法初始化 PAM：%s"
+
+#: login-utils/login.c:967
+#, fuzzy, c-format
+msgid "FAILED LOGIN %u FROM %s FOR %s, %s"
+msgstr "失敗的登入 %u 從 %s 用於 %s，%s"
+
+#: login-utils/login.c:977 login-utils/sulogin.c:1101
+#, c-format
msgid ""
-" -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
+"Login incorrect\n"
+"\n"
msgstr ""
+"登入不正確\n"
+"\n"
-#: misc-utils/lsblk.c:1374
-msgid " -I, --include <list> show only devices with specified major numbers\n"
+#: login-utils/login.c:979
+#, fuzzy, c-format
+msgid ""
+"Password incorrect\n"
+"\n"
msgstr ""
+"登入不正確\n"
+"\n"
-#: misc-utils/lsblk.c:1375
-#, fuzzy
-msgid " -f, --fs output info about filesystems\n"
-msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+#: login-utils/login.c:993
+#, fuzzy, c-format
+msgid "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"
+msgstr "太多登入嘗試 (%u) 從 %s 用於 %s，%s"
-#: misc-utils/lsblk.c:1376
-#, fuzzy
-msgid " -h, --help usage information (this)\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: login-utils/login.c:999
+#, c-format
+msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
+msgstr "失敗的登入執行階段自 %s 用於 %s, %s"
-#: misc-utils/lsblk.c:1377
-#, fuzzy
-msgid " -i, --ascii use ascii characters only\n"
-msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+#: login-utils/login.c:1007
+#, c-format
+msgid ""
+"\n"
+"Login incorrect\n"
+msgstr ""
+"\n"
+"登入錯誤\n"
-#: misc-utils/lsblk.c:1378
+#: login-utils/login.c:1034 login-utils/login.c:1421 login-utils/login.c:1447
#, fuzzy
-msgid " -m, --perms output info about permissions\n"
-msgstr " -V, --version 輸出版本資訊\n"
+msgid ""
+"\n"
+"Session setup problem, abort."
+msgstr ""
+"\n"
+"作業階段設定問題，放棄。"
-#: misc-utils/lsblk.c:1379
+#: login-utils/login.c:1035
#, fuzzy
-msgid " -l, --list use list format output\n"
-msgstr " -Q, --quiet-output 沒有一般輸出\n"
+msgid "NULL user name. Abort."
+msgstr "在 %s:%d 中包含空使用者名稱，放棄。"
-#: misc-utils/lsblk.c:1380
-msgid " -n, --noheadings don't print headings\n"
-msgstr ""
+#: login-utils/login.c:1173
+#, c-format
+msgid "TIOCSCTTY failed: %m"
+msgstr "TIOCSCTTY 失敗：%m"
-#: misc-utils/lsblk.c:1381
-msgid " -o, --output <list> output columns\n"
-msgstr ""
+#: login-utils/login.c:1275
+#, fuzzy, c-format
+msgid " %s [-p] [-h <host>] [-H] [[-f] <username>]\n"
+msgstr "用法：登入 [-p] [-h 主機] [-H] [-f 使用者名稱|使用者名稱]\n"
-#: misc-utils/lsblk.c:1382
+#: login-utils/login.c:1277
#, fuzzy
-msgid " -p, --paths print complete device path\n"
-msgstr " -v, --verbose 列印詳細的資料\n"
+msgid "Begin a session on the system.\n"
+msgstr "您正在這個系統中使用陰影密碼。\n"
-#: misc-utils/lsblk.c:1385
+#: login-utils/login.c:1280
#, fuzzy
-msgid " -s, --inverse inverse dependencies\n"
-msgstr " -v, --verbose 列印詳細的資料\n"
+msgid " -p do not destroy the environment"
+msgstr " -f 不分割長列\n"
-#: misc-utils/lsblk.c:1386
-msgid " -t, --topology output info about topology\n"
+#: login-utils/login.c:1281
+#, fuzzy
+msgid " -f skip a login authentication"
+msgstr " -f 不分割長列\n"
+
+#: login-utils/login.c:1282
+msgid " -h <host> hostname to be used for utmp logging"
msgstr ""
-#: misc-utils/lsblk.c:1387
+#: login-utils/login.c:1283
#, fuzzy
-msgid " -S, --scsi output info about SCSI devices\n"
-msgstr " -V 輸出版本資訊然後離開\n"
+msgid " -H suppress hostname in the login prompt"
+msgstr " -e 不暫停於結束的檔案\n"
-#: misc-utils/lsblk.c:1392 misc-utils/lslocks.c:510 sys-utils/prlimit.c:186
+#. TRANSLATORS: The standard value for %u is 60.
+#: login-utils/login.c:1307
#, fuzzy, c-format
-msgid ""
-"\n"
-"Available columns (for --output):\n"
-msgstr ""
-"\n"
-"可用欄位 (用於 --output)：\n"
+msgid "%s: timed out after %u seconds"
+msgstr "已逾時之後 %u 秒"
-#: misc-utils/lsblk.c:1405
+#: login-utils/login.c:1334
#, fuzzy, c-format
-msgid "failed to access sysfs directory: %s"
-msgstr "存取 sysfs 目錄時失敗：%s"
+msgid "login: -h is for superuser only\n"
+msgstr "login：-h 只提供系統管理者使用。\n"
+
+#: login-utils/login.c:1422
+#, fuzzy, c-format
+msgid "Invalid user name \"%s\". Abort."
+msgstr "無效的使用者名稱「%s」於 %s:%d，放棄。"
+
+#: login-utils/login.c:1446
+#, fuzzy, c-format
+msgid "groups initialization failed: %m"
+msgstr "群組初始化失敗：%m"
-#: misc-utils/lslocks.c:71
+#: login-utils/login.c:1474
#, fuzzy
-msgid "command of the process holding the lock"
-msgstr "命令的處理保有鎖定"
+msgid "setgid() failed"
+msgstr "setgid() 失敗"
+
+#: login-utils/login.c:1498
+msgid "setuid() failed"
+msgstr "setuid() 失敗"
+
+#: login-utils/login.c:1504 login-utils/sulogin.c:801
+#, fuzzy, c-format
+msgid "%s: change directory failed"
+msgstr "%s：變更目錄失敗"
+
+#: login-utils/login.c:1511 login-utils/sulogin.c:802
+#, c-format
+msgid "Logging in with home = \"/\".\n"
+msgstr "登入時個人資料夾=「/」。\n"
-#: misc-utils/lslocks.c:72
+#: login-utils/login.c:1542
#, fuzzy
-msgid "PID of the process holding the lock"
-msgstr "PID 的處理保有鎖定"
+msgid "couldn't exec shell script"
+msgstr "無法 exec 命令稿"
-#: misc-utils/lslocks.c:73
+#: login-utils/login.c:1544
#, fuzzy
-msgid "kind of lock: FL_FLOCK or FL_POSIX."
-msgstr "kind 的鎖定：FL_FLOCK 或 FL_POSIX。"
+msgid "no shell"
+msgstr "沒有命令殼"
+
+#: login-utils/lslogins.c:218 sys-utils/lscpu.c:339 sys-utils/lsmem.c:266
+msgid "no"
+msgstr "否"
-#: misc-utils/lslocks.c:74
+#: login-utils/lslogins.c:227 misc-utils/lsblk.c:199
#, fuzzy
-msgid "size of the lock"
-msgstr "大小的鎖定"
+msgid "user name"
+msgstr "使用者名稱"
-#: misc-utils/lslocks.c:75
+#: login-utils/lslogins.c:227
#, fuzzy
-msgid "lock access mode"
-msgstr "鎖定存取模式"
+msgid "Username"
+msgstr "使用者名稱"
-#: misc-utils/lslocks.c:76
+#: login-utils/lslogins.c:228 sys-utils/renice.c:54
#, fuzzy
-msgid "mandatory state of the lock: 0 (none), 1 (set)"
-msgstr "必要狀態的鎖定：0 (無)，1 (設定)"
+msgid "user ID"
+msgstr "使用者識別號"
-#: misc-utils/lslocks.c:77
+#: login-utils/lslogins.c:229
#, fuzzy
-msgid "relative byte offset of the lock"
-msgstr "相對的位元組偏移的鎖定"
+msgid "password not defined"
+msgstr "掛載來源無法定義"
-#: misc-utils/lslocks.c:78
+#: login-utils/lslogins.c:229
#, fuzzy
-msgid "ending offset of the lock"
-msgstr "結束部分偏移的鎖定"
+msgid "Password not required (empty)"
+msgstr ""
+"登入不正確\n"
+"\n"
-#: misc-utils/lslocks.c:79
+#: login-utils/lslogins.c:230
#, fuzzy
-msgid "path of the locked file"
-msgstr "路徑的鎖定的檔案"
+msgid "login by password disabled"
+msgstr "%s：Root 密碼錯亂"
-#: misc-utils/lslocks.c:80
+#: login-utils/lslogins.c:230
#, fuzzy
-msgid "PID of the process blocking the lock"
-msgstr "PID 的處理保有鎖定"
+msgid "Login by password disabled"
+msgstr "%s：Root 密碼錯亂"
+
+#: login-utils/lslogins.c:231
+msgid "password defined, but locked"
+msgstr ""
-#: misc-utils/lslocks.c:256
+#: login-utils/lslogins.c:231
#, fuzzy
-msgid "failed to parse ID"
-msgstr "å\89\96æ\9e\90 %s æ\99\82失æ\95\97"
+msgid "Password is locked"
+msgstr "å¯\86碼ï¼\9a"
-#: misc-utils/lslocks.c:278 sys-utils/nsenter.c:205
-msgid "failed to parse pid"
-msgstr "剖析 pid 時失敗"
+#: login-utils/lslogins.c:232
+#, fuzzy
+msgid "password encryption method"
+msgstr "密碼："
-#: misc-utils/lslocks.c:281
+#: login-utils/lslogins.c:232
#, fuzzy
-msgid "(unknown)"
-msgstr "(不明)"
+msgid "Password encryption method"
+msgstr "密碼："
+
+#: login-utils/lslogins.c:233
+msgid "log in disabled by nologin(8) or pam_nologin(8)"
+msgstr ""
-#: misc-utils/lslocks.c:290
+#: login-utils/lslogins.c:233
#, fuzzy
-msgid "failed to parse start"
-msgstr "剖析開始時失敗"
+msgid "No login"
+msgstr "登入："
-#: misc-utils/lslocks.c:297
+#: login-utils/lslogins.c:234
#, fuzzy
-msgid "failed to parse end"
-msgstr "剖析結束時失敗"
+msgid "primary group name"
+msgstr "群組名稱"
-#: misc-utils/lslocks.c:499 misc-utils/mcookie.c:70 misc-utils/uuidd.c:72
-#: misc-utils/uuidgen.c:36 sys-utils/dmesg.c:236 sys-utils/ipcmk.c:66
-#: sys-utils/lscpu.c:1356 sys-utils/readprofile.c:104 sys-utils/rtcwake.c:72
-#: term-utils/setterm.c:678
-#, fuzzy, c-format
-msgid " %s [options]\n"
-msgstr " %s [選項]\n"
+#: login-utils/lslogins.c:234
+#, fuzzy
+msgid "Primary group"
+msgstr "主要的"
-#: misc-utils/lslocks.c:502
+#: login-utils/lslogins.c:235
#, fuzzy
-msgid ""
-" -p, --pid <pid> process id\n"
-" -o, --output <list> define which output columns to use\n"
-" -n, --noheadings don't print headings\n"
-" -r, --raw use the raw output format\n"
-" -u, --notruncate don't truncate text in columns\n"
-" -h, --help display this help and exit\n"
-" -V, --version output version information and exit\n"
+msgid "primary group ID"
+msgstr "處理群組識別號"
+
+#: login-utils/lslogins.c:236
+msgid "supplementary group names"
+msgstr ""
+
+#: login-utils/lslogins.c:236
+msgid "Supplementary groups"
+msgstr ""
+
+#: login-utils/lslogins.c:237
+msgid "supplementary group IDs"
+msgstr ""
+
+#: login-utils/lslogins.c:237
+msgid "Supplementary group IDs"
msgstr ""
-" -p, --pid <pid> 處理識別號\n"
-" -o, --output<清單> 定義該項輸出欄位以使用\n"
-" -n, --noheadings 不列印標頭\n"
-" -r --raw 使用原始輸出格式\n"
-" -u, --notruncate 不截斷文字在中欄位\n"
-" -h, --help 顯示這份說明然後離開\n"
-" -V, --version 輸出版本資訊然後離開\n"
-#: misc-utils/lslocks.c:546 schedutils/chrt.c:257 schedutils/ionice.c:165
-#: schedutils/ionice.c:213 schedutils/ionice.c:223 schedutils/taskset.c:160
-#: sys-utils/prlimit.c:580
+#: login-utils/lslogins.c:238
#, fuzzy
-msgid "invalid PID argument"
-msgstr "ç\84¡æ\95\88ç\9a\84 PID å¼\95æ\95¸"
+msgid "home directory"
+msgstr "ç\9b®é\8c\84 %s ä¸\8då\98å\9c¨ï¼\81\n"
-#: misc-utils/mcookie.c:73
+#: login-utils/lslogins.c:238
#, fuzzy
-msgid ""
-" -f, --file <file> use file as a cookie seed\n"
-" -v, --verbose explain what is being done\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-" -f, --file <file> 使用檔案做為庫克種子\n"
-" -v, --verbose 解釋什麼正在是已完成\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+msgid "Home directory"
+msgstr "目錄 %s 不存在！\n"
-#: misc-utils/mcookie.c:150 misc-utils/mcookie.c:174
-#, c-format
-msgid "Got %d bytes from %s\n"
-msgstr "從 %2$s 取得 %1$d 位元組\n"
+#: login-utils/lslogins.c:239
+#, fuzzy
+msgid "login shell"
+msgstr "沒有命令殼"
-#: misc-utils/mcookie.c:156
-#, fuzzy, c-format
-msgid "closing %s failed"
-msgstr "關閉 %s 失敗"
+#: login-utils/lslogins.c:239
+#, fuzzy
+msgid "Shell"
+msgstr "沒有命令殼"
-#: misc-utils/namei.c:186
-#, c-format
-msgid "failed to read symlink: %s"
-msgstr "讀取符號連結時失敗：%s"
+#: login-utils/lslogins.c:240
+#, fuzzy
+msgid "full user name"
+msgstr "使用者名稱"
-#: misc-utils/namei.c:370
-#, fuzzy, c-format
-msgid "%s - No such file or directory\n"
-msgstr "%s - 沒有此類檔案或目錄\n"
+#: login-utils/lslogins.c:240
+msgid "Gecos field"
+msgstr ""
-#: misc-utils/namei.c:420
-#, fuzzy, c-format
-msgid " %s [options] pathname [pathname ...]\n"
-msgstr " %s [選項] 路徑名稱 [路徑名稱...]\n"
+#: login-utils/lslogins.c:241
+#, fuzzy
+msgid "date of last login"
+msgstr "略過第一列"
-#: misc-utils/namei.c:423
+#: login-utils/lslogins.c:241
#, fuzzy
-msgid ""
-" -h, --help displays this help text\n"
-" -V, --version output version information and exit\n"
-" -x, --mountpoints show mount point directories with a 'D'\n"
-" -m, --modes show the mode bits of each file\n"
-" -o, --owners show owner and group name of each file\n"
-" -l, --long use a long listing format (-m -o -v) \n"
-" -n, --nosymlinks don't follow symlinks\n"
-" -v, --vertical vertical align of modes and owners\n"
-msgstr ""
-" -h, --help 顯示這份說明文字\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -x, --mountpoints 顯示掛載點目錄與『D』\n"
-" -m, --modes 顯示模式位元的每個檔案\n"
-" -o, --owners 顯示擁有者和群組名稱的每個檔案\n"
-" -l, --long 使用長列表格式 (-m -o -v)\n"
-" -n, --nosymlinks 不追隨符號連結\n"
-" -v, --vertical 垂直對齊的模式和擁有者\n"
+msgid "Last login"
+msgstr "上次登入：%.*s "
-#: misc-utils/namei.c:432
-msgid ""
-"\n"
-"For more information see namei(1).\n"
+#: login-utils/lslogins.c:242
+msgid "last tty used"
msgstr ""
-"\n"
-"要獲得更多資訊請參看 namei(1)。\n"
-#: misc-utils/namei.c:492
+#: login-utils/lslogins.c:242
#, fuzzy
-msgid "pathname argument is missing"
-msgstr "路徑名稱引數缺少"
-
-#: misc-utils/namei.c:516
-#, c-format
-msgid "%s: exceeded limit of symlinks"
-msgstr "%s：超出符號連結的限制"
-
-#: misc-utils/rename.c:38
-#, fuzzy, c-format
-msgid "%s: lstat failed"
-msgstr "%s：stat 失敗"
-
-#: misc-utils/rename.c:41
-#, fuzzy, c-format
-msgid "%s: not a symbolic link"
-msgstr "%s：不是區塊裝置"
-
-#: misc-utils/rename.c:45
-#, fuzzy, c-format
-msgid "%s: readlink failed"
-msgstr "%s：開啟失敗"
-
-#: misc-utils/rename.c:79
-#, fuzzy, c-format
-msgid "%s: unlink failed"
-msgstr "%s：lseek 失敗"
-
-#: misc-utils/rename.c:81
-#, fuzzy, c-format
-msgid "%s: symlinking to %s failed"
-msgstr "%s：建立連結到 %s 失敗"
+msgid "Last terminal"
+msgstr "嚴重：%s 並非終端機"
-#: misc-utils/rename.c:86
-#, fuzzy, c-format
-msgid "%s: rename to %s failed"
-msgstr "%s：建立連結到 %s 失敗"
+#: login-utils/lslogins.c:243
+msgid "hostname during the last session"
+msgstr ""
-#: misc-utils/rename.c:100
-#, fuzzy, c-format
-msgid " %s [options] expression replacement file...\n"
-msgstr " %s [選項] 運算式置換檔案…\n"
+#: login-utils/lslogins.c:243
+#, fuzzy
+msgid "Last hostname"
+msgstr "last：gethostname"
-#: misc-utils/rename.c:103
+#: login-utils/lslogins.c:244
#, fuzzy
-msgid " -v, --verbose explain what is being done\n"
-msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+msgid "date of last failed login"
+msgstr "路徑 lstat 時失敗\n"
-#: misc-utils/rename.c:104
-msgid " -s, --symlink act on symlink target\n"
+#: login-utils/lslogins.c:244
+msgid "Failed login"
msgstr ""
-#: misc-utils/rename.c:151 sys-utils/ipcrm.c:154 term-utils/agetty.c:736
-#: term-utils/agetty.c:745
+#: login-utils/lslogins.c:245
#, fuzzy
-msgid "not enough arguments"
-msgstr "不足引數"
+msgid "where did the login fail?"
+msgstr "寫入 lastlog 失敗"
-#: misc-utils/uuidd.c:75
+#: login-utils/lslogins.c:245
#, fuzzy
-msgid ""
-" -p, --pid <path> path to pid file\n"
-" -s, --socket <path> path to socket\n"
-" -T, --timeout <sec> specify inactivity timeout\n"
-" -k, --kill kill running daemon\n"
-" -r, --random test random-based generation\n"
-" -t, --time test time-based generation\n"
-" -n, --uuids <num> request number of uuids\n"
-" -P, --no-pid do not create pid file\n"
-" -F, --no-fork do not daemonize using double-fork\n"
-" -S, --socket-activation do not create listening socket\n"
-" -d, --debug run in debugging mode\n"
-" -q, --quiet turn on quiet mode\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+msgid "Failed login terminal"
+msgstr "設定控制終端機時失敗"
+
+#: login-utils/lslogins.c:246
+msgid "user's hush settings"
msgstr ""
-" -p, --pid <path> 路徑到 pid 檔案\n"
-" -s, --socket<路徑> 路徑到通訊端\n"
-" -T, --timeout<sec> 指定不作用逾時\n"
-" -k, --kill 砍除執行中守護程式\n"
-" -r, --random 測試 random-based 產生\n"
-" -t, --time 測試 time-based 產生\n"
-" -n, --uuids<num> 要求 uuids 數量\n"
-" -P, --no-pid 不建立 pid 檔案\n"
-" -F, --no-fork 不 daemonize 使用 double-fork\n"
-" -S, --socket-activation 不建立傾聽通訊端\n"
-" -d, --debug 運行在中偵錯模式\n"
-" -q, --quiet 打開無訊息模式\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
-#: misc-utils/uuidd.c:129
-msgid "bad arguments"
-msgstr "不當的引數"
+#: login-utils/lslogins.c:246
+msgid "Hushed"
+msgstr ""
-#: misc-utils/uuidd.c:136
-msgid "socket"
-msgstr "通訊端"
+#: login-utils/lslogins.c:247
+msgid "days user is warned of password expiration"
+msgstr ""
-#: misc-utils/uuidd.c:147
-msgid "connect"
-msgstr "連接"
+#: login-utils/lslogins.c:247
+msgid "Password expiration warn interval"
+msgstr ""
-#: misc-utils/uuidd.c:167
-msgid "write"
-msgstr "寫入"
+#: login-utils/lslogins.c:248
+msgid "password expiration date"
+msgstr ""
-#: misc-utils/uuidd.c:175
-msgid "read count"
-msgstr "讀取計數"
+#: login-utils/lslogins.c:248
+#, fuzzy
+msgid "Password expiration"
+msgstr "密碼："
-#: misc-utils/uuidd.c:181
-msgid "bad response length"
-msgstr "不當的回應長度"
+#: login-utils/lslogins.c:249
+msgid "date of last password change"
+msgstr ""
-#: misc-utils/uuidd.c:235
-#, fuzzy, c-format
-msgid "cannot lock %s"
-msgstr "無法開啟 %s"
+#: login-utils/lslogins.c:249
+#, fuzzy
+msgid "Password changed"
+msgstr "密碼："
+
+#: login-utils/lslogins.c:250
+msgid "number of days required between changes"
+msgstr ""
-#: misc-utils/uuidd.c:259
+#: login-utils/lslogins.c:250
#, fuzzy
-msgid "couldn't create unix stream socket"
-msgstr "無法建立 unix 串流通訊端：%m"
+msgid "Minimum change time"
+msgstr "沒有變更所做"
-#: misc-utils/uuidd.c:284
-#, fuzzy, c-format
-msgid "couldn't bind unix socket %s"
-msgstr "無法繫結 unix 通訊端 %s：%m\n"
+#: login-utils/lslogins.c:251
+msgid "max number of days a password may remain unchanged"
+msgstr ""
-#: misc-utils/uuidd.c:321
-#, fuzzy, c-format
-msgid "uuidd daemon is already running at pid %s"
-msgstr "uuidd 守護程式已經以 pid %s 運行中\n"
+#: login-utils/lslogins.c:251
+msgid "Maximum change time"
+msgstr ""
-#: misc-utils/uuidd.c:332
-#, fuzzy, c-format
-msgid "couldn't listen on unix socket %s"
-msgstr "無法聽取於 unix 通訊端 %s：%m\n"
+#: login-utils/lslogins.c:252
+msgid "the user's security context"
+msgstr ""
-#: misc-utils/uuidd.c:358
+#: login-utils/lslogins.c:252
#, fuzzy
-msgid "no or too many file descriptors received"
-msgstr "沒有或太多檔案描述符號接收。\n"
+msgid "Selinux context"
+msgstr "Linux 純文字"
-#: misc-utils/uuidd.c:379
+#: login-utils/lslogins.c:253
#, fuzzy
-msgid "read failed"
-msgstr "fread 失敗"
+msgid "number of processes run by the user"
+msgstr "最大行程數量"
-#: misc-utils/uuidd.c:381
-#, fuzzy, c-format
-msgid "error reading from client, len = %d"
-msgstr "從客戶端讀取時發生錯誤，長度 = %d\n"
+#: login-utils/lslogins.c:253
+#, fuzzy
+msgid "Running processes"
+msgstr "%s：找不到行程「%s」\n"
-#: misc-utils/uuidd.c:390
+#: login-utils/lslogins.c:303 misc-utils/findmnt.c:142 misc-utils/lsblk.c:255
+#: sys-utils/lsipc.c:205 sys-utils/lsmem.c:145
#, c-format
-msgid "operation %d, incoming num = %d\n"
-msgstr "操作 %d，即將來到的數字 = %d\n"
+msgid "too many columns specified, the limit is %zu columns"
+msgstr ""
-#: misc-utils/uuidd.c:393
-#, c-format
-msgid "operation %d\n"
-msgstr "操作 %d\n"
+#: login-utils/lslogins.c:357 sys-utils/lsipc.c:472
+#, fuzzy
+msgid "unsupported time type"
+msgstr "不受支援的引數：%s"
-#: misc-utils/uuidd.c:409
-#, c-format
-msgid "Generated time UUID: %s\n"
-msgstr "產生的時間 UUID：%s\n"
+#: login-utils/lslogins.c:361
+#, fuzzy
+msgid "failed to compose time string"
+msgstr "剖析大小時失敗"
-#: misc-utils/uuidd.c:419
-#, c-format
-msgid "Generated random UUID: %s\n"
-msgstr "產生的隨機 UUID：%s\n"
+#: login-utils/lslogins.c:783
+#, fuzzy
+msgid "failed to get supplementary groups"
+msgstr "設定 umount 目標時失敗"
-#: misc-utils/uuidd.c:428
+#: login-utils/lslogins.c:1093
#, fuzzy, c-format
-msgid "Generated time UUID %s and %d following\n"
-msgid_plural "Generated time UUID %s and %d following\n"
-msgstr[0] "產生的時間 UUID %s 和 %d 下列\n"
+msgid "cannot found '%s'"
+msgstr "無法開啟 %s"
+
+#: login-utils/lslogins.c:1273
+#, fuzzy
+msgid "internal error: unknown column"
+msgstr "內部錯誤"
-#: misc-utils/uuidd.c:449
+#: login-utils/lslogins.c:1381
#, fuzzy, c-format
-msgid "Generated %d UUID:\n"
-msgid_plural "Generated %d UUIDs:\n"
-msgstr[0] "產生 %d UUID：\n"
+msgid ""
+"\n"
+"Last logs:\n"
+msgstr "上次登入：%.*s "
-#: misc-utils/uuidd.c:463
-#, c-format
-msgid "Invalid operation %d\n"
-msgstr "無效的操作 %d\n"
+#: login-utils/lslogins.c:1445
+msgid "Display information about known users in the system.\n"
+msgstr ""
-#: misc-utils/uuidd.c:475
-#, fuzzy, c-format
-msgid "Unexpected reply length from server %d"
-msgstr "未預期的回覆長度從伺服器 %d"
+#: login-utils/lslogins.c:1448
+msgid " -a, --acc-expiration display info about passwords expiration\n"
+msgstr ""
+
+#: login-utils/lslogins.c:1449
+msgid " -c, --colon-separate display data in a format similar to /etc/passwd\n"
+msgstr ""
-#: misc-utils/uuidd.c:529
+#: login-utils/lslogins.c:1450 sys-utils/lsipc.c:311
#, fuzzy
-msgid "failed to parse --uuids"
-msgstr "剖析 pid 時失敗"
+msgid " -e, --export display in an export-able output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: misc-utils/uuidd.c:546
+#: login-utils/lslogins.c:1451
#, fuzzy
-msgid "uuidd has been built without support for socket activation"
-msgstr "uuidd 已被 built 而無需支援用於通訊端活化。\n"
+msgid " -f, --failed display data about the users' last failed logins\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: misc-utils/uuidd.c:565
+#: login-utils/lslogins.c:1452
#, fuzzy
-msgid "failed to parse --timeout"
-msgstr "剖析大小時失敗"
+msgid " -G, --supp-groups display information about groups\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: login-utils/lslogins.c:1453
+msgid " -g, --groups=<groups> display users belonging to a group in <groups>\n"
+msgstr ""
-#: misc-utils/uuidd.c:578
+#: login-utils/lslogins.c:1454
#, fuzzy
-msgid "Both --pid and --no-pid specified. Ignoring --no-pid."
-msgstr "兩者 --pid 和 --no-pid 指定的。忽略 --no-pid。\n"
+msgid " -L, --last show info about the users' last login sessions\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: login-utils/lslogins.c:1455
+msgid " -l, --logins=<logins> display only users from <logins>\n"
+msgstr ""
-#: misc-utils/uuidd.c:587
+#: login-utils/lslogins.c:1456 sys-utils/lsipc.c:313
#, fuzzy
-msgid "Both --socket-activation and --socket specified. Ignoring --socket."
-msgstr "兩者 --socket-activation 和 --socket 指定的。忽略 --socket\n"
+msgid " -n, --newline display each piece of information on a new line\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: misc-utils/uuidd.c:594 misc-utils/uuidd.c:622
-#, fuzzy, c-format
-msgid "error calling uuidd daemon (%s)"
-msgstr "呼叫 uuidd 守護程式 (%s) 時發生錯誤：%m\n"
+#: login-utils/lslogins.c:1457 sys-utils/lsipc.c:306
+#, fuzzy
+msgid " --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: misc-utils/uuidd.c:595 misc-utils/uuidd.c:623
+#: login-utils/lslogins.c:1458 sys-utils/lsipc.c:307
#, fuzzy
-msgid "unexpected error"
-msgstr "%s：未預期的檔案格式"
+msgid " --notruncate don't truncate output\n"
+msgstr " -f 不分割長列\n"
-#: misc-utils/uuidd.c:603
-#, fuzzy, c-format
-msgid "%s and %d subsequent UUID\n"
-msgid_plural "%s and %d subsequent UUIDs\n"
-msgstr[0] "%s 和 %d 後續 UUID\n"
+#: login-utils/lslogins.c:1459 sys-utils/lsipc.c:315
+#, fuzzy
+msgid " -o, --output[=<list>] define the columns to output\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: misc-utils/uuidd.c:607
-#, c-format
-msgid "List of UUIDs:\n"
-msgstr "UUIDs 列表：\n"
+#: login-utils/lslogins.c:1460
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: misc-utils/uuidd.c:639
-#, fuzzy, c-format
-msgid "couldn't kill uuidd running at pid %d"
-msgstr "無法砍除 uuidd 執行中於 pid %d：%m\n"
+#: login-utils/lslogins.c:1461
+#, fuzzy
+msgid " -p, --pwd display information related to login by password.\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: misc-utils/uuidd.c:644
-#, fuzzy, c-format
-msgid "Killed uuidd running at pid %d.\n"
-msgstr "已砍除執行於 pid %d 的 uuidd\n"
+#: login-utils/lslogins.c:1462 sys-utils/lsipc.c:317
+#, fuzzy
+msgid " -r, --raw display in raw mode\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-#: misc-utils/uuidgen.c:39
+#: login-utils/lslogins.c:1463
#, fuzzy
-msgid ""
-" -r, --random generate random-based uuid\n"
-" -t, --time generate time-based uuid\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+msgid " -s, --system-accs display system accounts\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: login-utils/lslogins.c:1464 sys-utils/lsipc.c:308
+msgid " --time-format=<type> display dates in short, full or iso format\n"
msgstr ""
-" -r, --random 產生 random-based uuid\n"
-" -t, --time 產生 time-based uuid\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
-#: misc-utils/whereis.c:171
+#: login-utils/lslogins.c:1465
#, fuzzy
-msgid " -b search only for binaries\n"
-msgstr " -f 不分割長列\n"
+msgid " -u, --user-accs display user accounts\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: misc-utils/whereis.c:172
-msgid " -B <dirs> define binaries lookup path\n"
+#: login-utils/lslogins.c:1466 sys-utils/lsipc.c:319
+msgid " -y, --shell use column names to be usable as shell variable identifiers\n"
msgstr ""
-#: misc-utils/whereis.c:173
-msgid " -m search only for manuals\n"
-msgstr ""
+#: login-utils/lslogins.c:1467
+#, fuzzy
+msgid " -Z, --context display SELinux contexts\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-#: misc-utils/whereis.c:174
-msgid " -M <dirs> define man lookup path\n"
-msgstr ""
+#: login-utils/lslogins.c:1468
+#, fuzzy
+msgid " -z, --print0 delimit user entries with a nul character\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: misc-utils/whereis.c:175
-msgid " -s search only for sources\n"
+#: login-utils/lslogins.c:1469
+msgid " --wtmp-file <path> set an alternate path for wtmp\n"
msgstr ""
-#: misc-utils/whereis.c:176
-msgid " -S <dirs> define sources lookup path\n"
+#: login-utils/lslogins.c:1470
+msgid " --btmp-file <path> set an alternate path for btmp\n"
msgstr ""
-#: misc-utils/whereis.c:177
+#: login-utils/lslogins.c:1471
#, fuzzy
-msgid " -f terminate <dirs> argument list\n"
-msgstr " -n 終止命令與換列\n"
+msgid " --lastlog <path> set an alternate path for lastlog\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
-#: misc-utils/whereis.c:178
-msgid " -u search for unusual entries\n"
-msgstr ""
+#: login-utils/lslogins.c:1664
+#, fuzzy
+msgid "failed to request selinux state"
+msgstr "剖析開始時失敗"
-#: misc-utils/whereis.c:179
-msgid " -l output effective lookup paths\n"
+#: login-utils/lslogins.c:1678 login-utils/lslogins.c:1683
+msgid "Only one user may be specified. Use -l for multiple users."
msgstr ""
-#: misc-utils/wipefs.c:260
-#, c-format
-msgid "error: %s: probing initialization failed"
-msgstr "錯誤：%s：試探初始化時失敗"
+#: login-utils/newgrp.c:49 login-utils/newgrp.c:55
+#, fuzzy
+msgid "could not set terminal attributes"
+msgstr "無法設定終端機屬性用於 %s"
-#: misc-utils/wipefs.c:305
-#, fuzzy, c-format
-msgid "%s: failed to erase %s magic string at offset 0x%08jx"
-msgstr "%s：無法清除 %s 魔術字串於偏移 0x%08 jx"
+#: login-utils/newgrp.c:57
+#, fuzzy
+msgid "getline() failed"
+msgstr "setgid() 失敗"
-#: misc-utils/wipefs.c:311
-#, fuzzy, c-format
-msgid "%s: %zd bytes were erased at offset 0x%08jx (%s): "
-msgstr "%s：%zd 位元組被清除於偏移 0x%08 jx (%s)："
+#: login-utils/newgrp.c:150
+msgid "Password: "
+msgstr "密碼："
+
+#: login-utils/newgrp.c:160 login-utils/sulogin.c:1083
+#, fuzzy
+msgid "crypt failed"
+msgstr "寫入失敗"
-#: misc-utils/wipefs.c:338
+#: login-utils/newgrp.c:175
#, fuzzy, c-format
-msgid "%s: failed to create a signature backup"
-msgstr "%s：無法寫入簽名頁面"
+msgid " %s <group>\n"
+msgstr " %s <group>\n"
-#: misc-utils/wipefs.c:359
-msgid "failed to create a signature backup, $HOME undefined"
+#: login-utils/newgrp.c:178
+msgid "Log in to a new group.\n"
msgstr ""
-#: misc-utils/wipefs.c:393
-#, fuzzy, c-format
-msgid "%s: offset 0x%jx not found"
-msgstr "%s：找不到偏移 0x%jx "
-
-#: misc-utils/wipefs.c:414
+#: login-utils/newgrp.c:214
#, fuzzy
-msgid ""
-" -a, --all wipe all magic strings (BE CAREFUL!)\n"
-" -b, --backup create a signature backup in $HOME\n"
-" -f, --force force erasure\n"
-" -h, --help show this help text\n"
-" -n, --no-act do everything except the actual write() call\n"
-" -o, --offset <num> offset to erase, in bytes\n"
-" -p, --parsable print out in parsable instead of printable format\n"
-" -q, --quiet suppress output messages\n"
-" -t, --types <list> limit the set of filesystem, RAIDs or partition tables\n"
-" -V, --version output version information and exit\n"
-msgstr ""
-" -a, --all 撥所有魔術字串 (請小心 !)\n"
-" -h, --help 顯示這份說明文字\n"
-" -n, --no-act 做所有東西除了實際的寫入() 呼叫\n"
-" -o, --offset <num> 偏移到清除，在中位元組\n"
-" -p, --parsable 印出在中 parsable 以代替可列印格式\n"
-" -q, --quiet 抑制輸出訊息\n"
-" -t, --types<清單> 限制集合檔案系統，RAIDs 或分割表\n"
-" -V, --version 輸出版本資訊然後離開\n"
+msgid "who are you?"
+msgstr "誰是您？"
-#: misc-utils/wipefs.c:425
-#, c-format
-msgid ""
-"\n"
-"For more information see wipefs(8).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 wipefs(8)。\n"
-
-#: misc-utils/wipefs.c:485
+#: login-utils/newgrp.c:218 login-utils/newgrp.c:230 sys-utils/nsenter.c:567
+#: sys-utils/unshare.c:1087
#, fuzzy
-msgid "invalid offset argument"
-msgstr "無效的偏移引數"
+msgid "setgid failed"
+msgstr "setgid 失敗"
-#: misc-utils/wipefs.c:510
+#: login-utils/newgrp.c:223 login-utils/newgrp.c:225
#, fuzzy
-msgid "The --backup option is meaningless in this context"
-msgstr "選項 --offset 未被允許在中這個語境。"
-
-#: mount-deprecated/fstab.c:145
-#, c-format
-msgid "warning: error reading %s: %s"
-msgstr "警告：讀取時發生錯誤 %s: %s"
+msgid "no such group"
+msgstr "沒有此類群組"
-#: mount-deprecated/fstab.c:172 mount-deprecated/fstab.c:197
-#, c-format
-msgid "warning: can't open %s: %s"
-msgstr "警告：無法開啟 %s: %s"
+#: login-utils/newgrp.c:234 sys-utils/nsenter.c:569 sys-utils/unshare.c:1090
+#, fuzzy
+msgid "setuid failed"
+msgstr "setuid 失敗"
-#: mount-deprecated/fstab.c:177
-#, c-format
-msgid "mount: could not open %s - using %s instead\n"
-msgstr "mount：無法開啟 %s - 使用 %s 做為替代\n"
+#: login-utils/nologin.c:28 misc-utils/lsfd.c:1538 misc-utils/lslocks.c:545
+#: misc-utils/mcookie.c:83 misc-utils/uuidd.c:97 misc-utils/uuidgen.c:26
+#: sys-utils/dmesg.c:276 sys-utils/ipcmk.c:67 sys-utils/irqtop.c:262
+#: sys-utils/lscpu.c:1177 sys-utils/lsipc.c:292 sys-utils/lsirq.c:57
+#: sys-utils/lsmem.c:519 sys-utils/readprofile.c:106 sys-utils/rtcwake.c:99
+#: term-utils/scriptlive.c:57 term-utils/scriptreplay.c:47
+#: term-utils/setterm.c:381 text-utils/line.c:31
+#, fuzzy, c-format
+msgid " %s [options]\n"
+msgstr " %s [選項]\n"
-#: mount-deprecated/fstab.c:635
-#, c-format
-msgid "can't create lock file %s: %s (use -n flag to override)"
-msgstr "無法建立鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+#: login-utils/nologin.c:31
+msgid "Politely refuse a login.\n"
+msgstr ""
-#: mount-deprecated/fstab.c:661
-#, c-format
-msgid "can't link lock file %s: %s (use -n flag to override)"
-msgstr "無法鏈結鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+#: login-utils/nologin.c:34
+#, fuzzy
+msgid " -c, --command <command> does nothing (for compatibility with su -c)\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
-#: mount-deprecated/fstab.c:677
-#, c-format
-msgid "can't open lock file %s: %s (use -n flag to override)"
-msgstr "無法開啟鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
+#: login-utils/nologin.c:109
+#, fuzzy, c-format
+msgid "This account is currently not available.\n"
+msgstr "這個磁碟為目前在使用中。\n"
-#: mount-deprecated/fstab.c:692
-#, c-format
-msgid "Can't lock lock file %s: %s\n"
-msgstr "無法鎖定已鎖定檔案 %s: %s\n"
+#: login-utils/su-common.c:233
+msgid " (core dumped)"
+msgstr ""
-#: mount-deprecated/fstab.c:706
-#, c-format
-msgid "can't lock lock file %s: %s"
-msgstr "無法鎖定已鎖定檔案 %s: %s"
+#: login-utils/su-common.c:281
+msgid "change owner or mode for pseudo-terminal failed"
+msgstr ""
-#: mount-deprecated/fstab.c:708
-msgid "timed out"
-msgstr "已逾時"
+#: login-utils/su-common.c:375
+#, fuzzy
+msgid "failed to modify environment"
+msgstr "開啟目錄時失敗"
-#: mount-deprecated/fstab.c:715
-#, c-format
-msgid ""
-"Cannot create link %s\n"
-"Perhaps there is a stale lock file?\n"
+#: login-utils/su-common.c:411
+msgid "may not be used by non-root users"
msgstr ""
-"無法建立鏈結 %s\n"
-"也許有失去時效的鎖定檔案？\n"
-
-#: mount-deprecated/fstab.c:857 mount-deprecated/fstab.c:914
-#, c-format
-msgid "cannot open %s (%s) - mtab not updated"
-msgstr "無法開啟 %s (%s) - mtab 尚未更新"
-#: mount-deprecated/fstab.c:922
-#, c-format
-msgid "error writing %s: %s"
-msgstr "寫入 %s 時發生錯誤：%s"
+#: login-utils/su-common.c:435
+#, fuzzy
+msgid "authentication failed"
+msgstr "tcgetattr 失敗"
-#: mount-deprecated/fstab.c:937
+#: login-utils/su-common.c:448
#, fuzzy, c-format
-msgid "%s: cannot fflush changes: %s"
-msgstr "%s：無法 fflush 變更：%s"
-
-#: mount-deprecated/fstab.c:954
-#, c-format
-msgid "error changing mode of %s: %s\n"
-msgstr "變更 %s 模式時發生錯誤：%s\n"
-
-#: mount-deprecated/fstab.c:967
-#, c-format
-msgid "error changing owner of %s: %s\n"
-msgstr "變更 %s 的擁有者時發生錯誤：%s\n"
+msgid "cannot open session: %s"
+msgstr "無法無法開啟作業階段：%s"
-#: mount-deprecated/fstab.c:978
-#, c-format
-msgid "can't rename %s to %s: %s\n"
-msgstr "無法重新命名 %s 為 %s: %s\n"
+#: login-utils/su-common.c:467
+#, fuzzy
+msgid "cannot block signals"
+msgstr "無法區塊信號"
-#: mount-deprecated/mount.c:315
-#, c-format
-msgid ""
-"\n"
-"mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
-" It's possible that information reported by mount(8) is not\n"
-" up to date. For actual information about system mount points\n"
-" check the /proc/mounts file.\n"
-"\n"
+#: login-utils/su-common.c:484
+msgid "cannot initialize signal mask for session"
msgstr ""
-"\n"
-"mount：警告：/etc/mtab 不可寫入 (例：唯讀檔案系統)。\n"
-" 由 mount(8) 所報告的資訊有可能不是最新狀況。\n"
-" 想要獲得有關系統掛載點的實際資訊，\n"
-" 請檢查 /proc/mounts 檔案。\n"
-"\n"
-#: mount-deprecated/mount.c:365
-#, c-format
-msgid "mount: improperly quoted option string '%s'"
-msgstr "mount：選項字串「%s」加入了不適當的引號"
+#: login-utils/su-common.c:492
+#, fuzzy
+msgid "cannot initialize signal mask"
+msgstr "無法區塊信號"
-#: mount-deprecated/mount.c:398
-#, c-format
-msgid "mount: translated %s '%s' to '%s'\n"
-msgstr "mount：已翻譯 %s「%s」為「%s」\n"
+#: login-utils/su-common.c:502
+#, fuzzy
+msgid "cannot set signal handler for session"
+msgstr "無法設定信號處理程式"
-#: mount-deprecated/mount.c:455
-#, fuzzy, c-format
-msgid "mount: SELinux *context= options are ignore on remount.\n"
-msgstr "掛載：SELinux * 語境=選項是忽略於 remount。\n"
+#: login-utils/su-common.c:510 misc-utils/uuidd.c:439
+#: sys-utils/lscpu-virt.c:489
+#, fuzzy
+msgid "cannot set signal handler"
+msgstr "無法設定信號處理程式"
-#: mount-deprecated/mount.c:651
-#, c-format
-msgid "mount: according to mtab, %s is already mounted on %s"
-msgstr "mount：根據 mtab，%s 已經掛載到 %s"
+#: login-utils/su-common.c:518
+#, fuzzy
+msgid "cannot set signal mask"
+msgstr "無法設定信號處理程式"
-#: mount-deprecated/mount.c:656
-#, c-format
-msgid "mount: according to mtab, %s is mounted on %s"
-msgstr "mount：根據 mtab，%s 已經掛載到 %s"
+#: login-utils/su-common.c:545 term-utils/script.c:961
+#: term-utils/scriptlive.c:296
+#, fuzzy
+msgid "failed to create pseudo-terminal"
+msgstr "初始化輸出表格時失敗"
-#: mount-deprecated/mount.c:680
-#, c-format
-msgid "mount: can't open %s for writing: %s"
-msgstr "mount：無法開啟 %s 以用於寫入：%s"
+#: login-utils/su-common.c:547 term-utils/script.c:968
+#: term-utils/scriptlive.c:298
+#, fuzzy
+msgid "failed to initialize signals handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
-#: mount-deprecated/mount.c:697
-#, c-format
-msgid "mount: error writing %s: %s"
-msgstr "mount：寫入時發生錯誤 %s: %s"
+#: login-utils/su-common.c:562
+#, fuzzy
+msgid "cannot set child signal handler"
+msgstr "無法設定信號處理程式"
-#: mount-deprecated/mount.c:705
-#, c-format
-msgid "mount: error changing mode of %s: %s"
-msgstr "mount：變更模式時發生錯誤 %s: %s"
+#: login-utils/su-common.c:572 term-utils/script.c:977
+#: term-utils/scriptlive.c:305
+#, fuzzy
+msgid "cannot create child process"
+msgstr "無法建立子行程"
-#: mount-deprecated/mount.c:807
+#: login-utils/su-common.c:591 sys-utils/nsenter.c:510
+#: sys-utils/switch_root.c:189
#, fuzzy, c-format
-msgid "mount: cannot set group id: %m"
-msgstr "掛載：無法設定群組識別號：%m"
+msgid "cannot change directory to %s"
+msgstr "無法變更目錄到 %s"
-#: mount-deprecated/mount.c:810
+#: login-utils/su-common.c:617 term-utils/scriptlive.c:354
#, fuzzy, c-format
-msgid "mount: cannot set user id: %m"
-msgstr "掛載：無法設定使用者識別號：%m"
+msgid ""
+"\n"
+"Session terminated, killing shell..."
+msgstr ""
+"\n"
+"作業階段終止，killing 命令殼…"
-#: mount-deprecated/mount.c:857 mount-deprecated/mount.c:2153
-#, c-format
-msgid "mount: cannot fork: %s"
-msgstr "mount：無法衍生執行：%s"
+#: login-utils/su-common.c:628
+#, fuzzy, c-format
+msgid " ...killed.\n"
+msgstr "...killed。\n"
-#: mount-deprecated/mount.c:993
-#, c-format
-msgid "Trying %s\n"
-msgstr "嘗試 %s\n"
+#: login-utils/su-common.c:725
+#, fuzzy
+msgid "failed to set the PATH environment variable"
+msgstr "設定 %s 資源限制時失敗"
-#: mount-deprecated/mount.c:1021
-#, c-format
-msgid "mount: you didn't specify a filesystem type for %s\n"
-msgstr "mount：您並未指定 %s 的檔案系統類型\n"
+#: login-utils/su-common.c:802
+#, fuzzy
+msgid "cannot set groups"
+msgstr "無法設定群組"
-#: mount-deprecated/mount.c:1024
-#, c-format
-msgid " I will try all types mentioned in %s or %s\n"
-msgstr " 我將嘗試所有在 %s 或 %s 中提及的類型\n"
+#: login-utils/su-common.c:808
+#, fuzzy, c-format
+msgid "failed to establish user credentials: %s"
+msgstr "剖析等級『%s 時失敗』"
-#: mount-deprecated/mount.c:1027
-#, c-format
-msgid " and it looks like this is swapspace\n"
-msgstr " 而它看起來像是個置換空間\n"
+#: login-utils/su-common.c:818
+msgid "cannot set group id"
+msgstr "無法設定群組識別號"
-#: mount-deprecated/mount.c:1029
-#, c-format
-msgid " I will try type %s\n"
-msgstr " 我將嘗試類型 %s\n"
+#: login-utils/su-common.c:820
+msgid "cannot set user id"
+msgstr "無法設定使用者識別號"
-#: mount-deprecated/mount.c:1054
-#, c-format
-msgid "%s looks like swapspace - not mounted"
-msgstr "%s 看起來像是置換空間 - 未掛載"
+#: login-utils/su-common.c:884
+msgid " -m, -p, --preserve-environment do not reset environment variables\n"
+msgstr ""
-#: mount-deprecated/mount.c:1062
-#, c-format
-msgid ""
-"mount: %s: more filesystems detected. This should not happen,\n"
-" use -t <type> to explicitly specify the filesystem type or\n"
-" use wipefs(8) to clean up the device.\n"
+#: login-utils/su-common.c:885
+msgid " -w, --whitelist-environment <list> don't reset specified variables\n"
msgstr ""
-"掛載：%s：偵測到多個檔案系統。這不應發生，\n"
-" 使用 -t <type> 以明確指定檔案系統型態或\n"
-" 使用 wipefs(8) 以清理裝置。\n"
-#: mount-deprecated/mount.c:1150
-msgid "mount failed"
-msgstr "掛載失敗"
+#: login-utils/su-common.c:888
+#, fuzzy
+msgid " -g, --group <group> specify the primary group\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: mount-deprecated/mount.c:1152
-#, c-format
-msgid "mount: only root can mount %s on %s"
-msgstr "mount：只有 root 可以將 %s 掛載到 %s"
+#: login-utils/su-common.c:889
+#, fuzzy
+msgid " -G, --supp-group <group> specify a supplemental group\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: mount-deprecated/mount.c:1243
-msgid "mount: loop device specified twice"
-msgstr "mount：環路裝置被指定了兩次"
+#: login-utils/su-common.c:892
+#, fuzzy
+msgid " -, -l, --login make the shell a login shell\n"
+msgstr " -h, --help 這個小用法指導\n"
-#: mount-deprecated/mount.c:1248
-msgid "mount: type specified twice"
-msgstr "mount：類型被指定了兩次"
+#: login-utils/su-common.c:893
+#, fuzzy
+msgid " -c, --command <command> pass a single command to the shell with -c\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
-#: mount-deprecated/mount.c:1276
-#, c-format
-msgid "mount: skipping the setup of a loop device\n"
-msgstr "mount：跳過環路裝置的設定\n"
+#: login-utils/su-common.c:894
+#, fuzzy
+msgid ""
+" --session-command <command> pass a single command to the shell with -c\n"
+" and do not create a new session\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
-#: mount-deprecated/mount.c:1287
-#, fuzzy, c-format
-msgid "mount: enabling autoclear loopdev flag\n"
-msgstr "掛載：啟用 autoclear loopdev 旗標\n"
+#: login-utils/su-common.c:896
+#, fuzzy
+msgid " -f, --fast pass -f to the shell (for csh or tcsh)\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: mount-deprecated/mount.c:1295
-#, c-format
-msgid "mount: invalid offset '%s' specified"
-msgstr "mount：指定了無效的偏移值「%s」"
+#: login-utils/su-common.c:897
+#, fuzzy
+msgid " -s, --shell <shell> run <shell> if /etc/shells allows it\n"
+msgstr " -s, --shell <shell> 設定命令殼引言慣例\n"
-#: mount-deprecated/mount.c:1299
-#, c-format
-msgid "mount: invalid sizelimit '%s' specified"
-msgstr "mount：指定了無效的大小限制「%s」"
+#: login-utils/su-common.c:898
+#, fuzzy
+msgid " -P, --pty create a new pseudo-terminal\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: mount-deprecated/mount.c:1304
-#, c-format
-msgid "mount: according to mtab %s is already mounted on %s as loop"
-msgstr "mount：根據 mtab %s 已被當做環路而掛載於 %s"
+#: login-utils/su-common.c:908
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] -u <user> [[--] <command>]\n"
+" %1$s [options] [-] [<user> [<argument>...]]\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
-#: mount-deprecated/mount.c:1309 sys-utils/losetup.c:512
-msgid "encryption not supported, use cryptsetup(8) instead"
+#: login-utils/su-common.c:913
+msgid ""
+"Run <command> with the effective user ID and group ID of <user>. If -u is\n"
+"not given, fall back to su(1)-compatible semantics and execute standard shell.\n"
+"The options -c, -f, -l, and -s are mutually exclusive with -u.\n"
msgstr ""
-#: mount-deprecated/mount.c:1314
+#: login-utils/su-common.c:918
#, fuzzy
-msgid "mount: failed to initialize loopdev context"
-msgstr "初始化 loopcxt 時失敗"
+msgid " -u, --user <user> username\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: mount-deprecated/mount.c:1319
+#: login-utils/su-common.c:929
#, fuzzy, c-format
-msgid "mount: failed to use %s device"
-msgstr "%s：無法使用裝置"
+msgid " %s [options] [-] [<user> [<argument>...]]\n"
+msgstr " %s [選項] <program> [引數...]\n"
-#: mount-deprecated/mount.c:1330
+#: login-utils/su-common.c:933
#, fuzzy
-msgid "mount: failed to found free loop device"
-msgstr "掛載：無法找到自由迴圈裝置"
+msgid ""
+"Change the effective user ID and group ID to that of <user>.\n"
+"A mere - implies -l. If <user> is not given, root is assumed.\n"
+msgstr ""
+"\n"
+" 變更有效使用者識別號和群組識別號到該的使用者。\n"
+" mere - 意味著 -l. 如果使用者無法給定的，假設根。\n"
-#: mount-deprecated/mount.c:1335
+#: login-utils/su-common.c:1010
#, c-format
-msgid "mount: going to use the loop device %s\n"
-msgstr "mount：即將使用環路裝置 %s\n"
+msgid "specifying more than %d supplemental group is not possible"
+msgid_plural "specifying more than %d supplemental groups is not possible"
+msgstr[0] ""
-#: mount-deprecated/mount.c:1347
+#: login-utils/su-common.c:1016
#, fuzzy, c-format
-msgid "mount: %s: failed to set loopdev attributes"
-msgstr "掛載：%s：無法設定 loopdev 屬性"
+msgid "group %s does not exist"
+msgstr "使用者 %s 不存在"
-#: mount-deprecated/mount.c:1358
-#, fuzzy, c-format
-msgid "mount: %s: failed setting up loop device: %m"
-msgstr "掛載：%s：失敗的設定迴圈裝置：%m"
+#: login-utils/su-common.c:1125
+msgid "--pty is not supported for your system"
+msgstr ""
-#: mount-deprecated/mount.c:1369
-#, c-format
-msgid "mount: stolen loop=%s ...trying again\n"
-msgstr "mount：丟失環路=%s …再試一次\n"
+#: login-utils/su-common.c:1159
+msgid "ignoring --preserve-environment, it's mutually exclusive with --login"
+msgstr ""
-#: mount-deprecated/mount.c:1374
-#, c-format
-msgid "mount: stolen loop=%s"
-msgstr "mount：丟失環路=%s"
+#: login-utils/su-common.c:1173
+msgid "options --{shell,fast,command,session-command,login} and --user are mutually exclusive"
+msgstr ""
-#: mount-deprecated/mount.c:1381
-#, c-format
-msgid "mount: setup loop device successfully\n"
-msgstr "mount：成功設定環路裝置\n"
+#: login-utils/su-common.c:1176
+#, fuzzy
+msgid "no command was specified"
+msgstr "未指定任何動作"
-#: mount-deprecated/mount.c:1429
-#, c-format
-msgid "mount: no %s found - creating it..\n"
-msgstr "mount：找不到 %s - 建立它…\n"
+#: login-utils/su-common.c:1188
+msgid "only root can specify alternative groups"
+msgstr ""
-#: mount-deprecated/mount.c:1456
+#: login-utils/su-common.c:1199
#, c-format
-msgid "mount: cannot open %s for setting speed"
-msgstr "mount：無法開啟 %s 以用於設定速度"
+msgid "user %s does not exist or the user entry does not contain all the required fields"
+msgstr ""
-#: mount-deprecated/mount.c:1459
+#: login-utils/su-common.c:1234
#, fuzzy, c-format
-msgid "mount: cannot set speed: %m"
-msgstr "掛載：無法設定速度：%m"
+msgid "using restricted shell %s"
+msgstr "使用限制的命令殼 %s"
-#: mount-deprecated/mount.c:1550
-#, c-format
-msgid "mount: according to mtab, %s is already mounted on %s\n"
-msgstr "mount：根據 mtab，%s 已經掛載到 %s\n"
+#: login-utils/su-common.c:1255
+#, fuzzy
+msgid "failed to allocate pty handler"
+msgstr "配置迭代器時失敗"
-#: mount-deprecated/mount.c:1629
-#, c-format
-msgid "mount: warning: %s seems to be mounted read-write.\n"
-msgstr "mount：警告：%s 似乎被掛載為可讀可寫。\n"
+#: login-utils/su-common.c:1281
+#, fuzzy, c-format
+msgid "warning: cannot change directory to %s"
+msgstr "警告：無法變更目錄到 %s"
-#: mount-deprecated/mount.c:1641
-#, c-format
-msgid "mount: warning: %s seems to be mounted read-only.\n"
-msgstr "mount：警告：%s 似乎被掛載為唯讀。\n"
+#: login-utils/sulogin.c:173 login-utils/sulogin.c:176
+#, fuzzy, c-format
+msgid "tcgetattr failed"
+msgstr "tcgetattr 失敗"
-#: mount-deprecated/mount.c:1677
-msgid ""
-"mount: I could not determine the filesystem type, and none was specified"
-msgstr "mount：我無法決定檔案系統類型，而它並未被指定"
+#: login-utils/sulogin.c:259
+#, fuzzy
+msgid "tcsetattr failed"
+msgstr "tcsetattr 失敗"
+
+#: login-utils/sulogin.c:523
+#, fuzzy, c-format
+msgid "%s: no entry for root\n"
+msgstr "%s：沒有條目用於根\n"
-#: mount-deprecated/mount.c:1680
-msgid "mount: you must specify the filesystem type"
-msgstr "mount：您必須指定檔案系統類型"
+#: login-utils/sulogin.c:550
+#, fuzzy, c-format
+msgid "%s: no entry for root"
+msgstr "%s：沒有條目用於根"
-#: mount-deprecated/mount.c:1683
-msgid "mount: mount failed"
-msgstr "mount：掛載時失敗"
+#: login-utils/sulogin.c:555
+#, fuzzy, c-format
+msgid "%s: root password garbled"
+msgstr "%s：Root 密碼錯亂"
-#: mount-deprecated/mount.c:1689 mount-deprecated/mount.c:1726
+#: login-utils/sulogin.c:584
#, c-format
-msgid "mount: mount point %s is not a directory"
-msgstr "mount：掛載點 %s 並非目錄"
+msgid ""
+"\n"
+"Cannot open access to console, the root account is locked.\n"
+"See sulogin(8) man page for more details.\n"
+"\n"
+"Press Enter to continue.\n"
+msgstr ""
-#: mount-deprecated/mount.c:1691
-msgid "mount: permission denied"
-msgstr "mount：權限被拒"
+#: login-utils/sulogin.c:590
+#, fuzzy, c-format
+msgid "Give root password for login: "
+msgstr "給出 Root 密碼用於維護\n"
-#: mount-deprecated/mount.c:1693
-msgid "mount: must be superuser to use mount"
-msgstr "mount：必須是系統管理者才能使用掛載"
+#: login-utils/sulogin.c:592
+#, fuzzy, c-format
+msgid "Press Enter for login: "
+msgstr "按下輸入用於維護"
-#: mount-deprecated/mount.c:1697 mount-deprecated/mount.c:1701
-#, c-format
-msgid "mount: %s is busy"
-msgstr "mount：%s 忙碌中"
+#: login-utils/sulogin.c:595
+#, fuzzy, c-format
+msgid "Give root password for maintenance\n"
+msgstr "給出 Root 密碼用於維護\n"
-#: mount-deprecated/mount.c:1703
-msgid "mount: proc already mounted"
-msgstr "mount：proc 已被掛載"
+#: login-utils/sulogin.c:597
+#, fuzzy, c-format
+msgid "Press Enter for maintenance\n"
+msgstr "按下輸入用於維護"
-#: mount-deprecated/mount.c:1705
-#, c-format
-msgid "mount: %s already mounted or %s busy"
-msgstr "mount：%s 已被掛載或者 %s 忙碌中"
+#: login-utils/sulogin.c:598
+#, fuzzy, c-format
+msgid "(or press Control-D to continue): "
+msgstr "(或型態 Control-D 到繼續)："
-#: mount-deprecated/mount.c:1711
-#, c-format
-msgid "mount: mount point %s does not exist"
-msgstr "mount：掛載點 %s 不存在"
+#: login-utils/sulogin.c:805
+#, fuzzy
+msgid "change directory to system root failed"
+msgstr "變更目錄到系統根失敗"
-#: mount-deprecated/mount.c:1713
-#, c-format
-msgid "mount: mount point %s is a symbolic link to nowhere"
-msgstr "mount：掛載點 %s 是不明位置的符號連結"
+#: login-utils/sulogin.c:855
+#, fuzzy
+msgid "setexeccon failed"
+msgstr "setexeccon 失敗"
-#: mount-deprecated/mount.c:1718
-#, c-format
-msgid "mount: special device %s does not exist"
-msgstr "mount：特殊裝置 %s 不存在"
+#: login-utils/sulogin.c:876
+#, fuzzy, c-format
+msgid " %s [options] [tty device]\n"
+msgstr " %s [選項] [tty 裝置]\n"
-#: mount-deprecated/mount.c:1730
-#, c-format
-msgid ""
-"mount: special device %s does not exist\n"
-" (a path prefix is not a directory)\n"
+#: login-utils/sulogin.c:879
+msgid "Single-user login.\n"
msgstr ""
-"mount：特殊裝置 %s 不存在\n"
-" (路徑前綴並非目錄)\n"
-#: mount-deprecated/mount.c:1742
-#, fuzzy, c-format
-msgid "mount: %s not mounted or bad option"
-msgstr "掛載：%s 無法掛載的或不當的選項"
-
-#: mount-deprecated/mount.c:1744
-#, c-format
+#: login-utils/sulogin.c:882
+#, fuzzy
msgid ""
-"mount: wrong fs type, bad option, bad superblock on %s,\n"
-" missing codepage or helper program, or other error"
+" -p, --login-shell start a login shell\n"
+" -t, --timeout <seconds> max time to wait for a password (default: no limit)\n"
+" -e, --force examine password files directly if getpwnam(3) fails\n"
msgstr ""
-"mount：錯誤檔案系統類型、不當的選項、不當的超區塊於 %s,\n"
-" 缺少編碼頁或輔助程式，或其他錯誤"
+" -p, --login-shell 開始登入命令殼\n"
+" -t, --timeout <seconds> 最大時間到等待密碼 (預設：沒有限制)\n"
+" -e, --force 檢查密碼檔案直接如果 getpwnam (3) 失敗\n"
-#: mount-deprecated/mount.c:1751
-msgid ""
-" (for several filesystems (e.g. nfs, cifs) you might\n"
-" need a /sbin/mount.<type> helper program)"
-msgstr ""
-" (對於許多檔案系統 (例如 nfs，cifs) 您也許\n"
-" 需要 /sbin/mount.<type> 輔助程式)"
+#: login-utils/sulogin.c:938 misc-utils/findmnt.c:1619 sys-utils/wdctl.c:764
+#: term-utils/agetty.c:860 term-utils/wall.c:219
+#, fuzzy
+msgid "invalid timeout argument"
+msgstr "無效的逾時引數"
+
+#: login-utils/sulogin.c:965
+#, fuzzy
+msgid "only superuser can run this program"
+msgstr "只有根可以運行這個程式。"
+
+#: login-utils/sulogin.c:1008
+#, fuzzy
+msgid "cannot open console"
+msgstr "無法開啟 %s"
+
+#: login-utils/sulogin.c:1015
+#, fuzzy
+msgid "cannot open password database"
+msgstr "無法開啟密碼資料庫。"
-#: mount-deprecated/mount.c:1760
+#: login-utils/sulogin.c:1098
+#, fuzzy, c-format
msgid ""
-" (could this be the IDE device where you in fact use\n"
-" ide-scsi so that sr0 or sda or so is needed?)"
-msgstr ""
-" (是否可能您使用 IDE 裝置其實是\n"
-" ide-scsi 因而需要 sr0 或 sda 之類裝置?)"
+"cannot execute su shell\n"
+"\n"
+msgstr "無法取得磁碟大小"
-#: mount-deprecated/mount.c:1765
+#: login-utils/sulogin.c:1105
+#, fuzzy
msgid ""
-" (aren't you trying to mount an extended partition,\n"
-" instead of some logical partition inside?)"
-msgstr ""
-" (您是否試著掛載擴充分割區，\n"
-" 而非其中的邏輯分割區 ?)"
+"Timed out\n"
+"\n"
+msgstr "已逾時"
-#: mount-deprecated/mount.c:1772
+#: login-utils/sulogin.c:1137
+#, fuzzy
msgid ""
-" In some cases useful info is found in syslog - try\n"
-" dmesg | tail or so\n"
-msgstr ""
-" 在某些狀況下，syslog 中可以找到有用的資訊 - 嘗試\n"
-" dmesg | tail 之類命令\n"
+"cannot wait on su shell\n"
+"\n"
+msgstr "無法取得磁碟大小"
-#: mount-deprecated/mount.c:1778 sys-utils/mount.c:563
-msgid "mount table full"
-msgstr "掛載表已滿"
+#: login-utils/utmpdump.c:181
+#, fuzzy, c-format
+msgid "%s: cannot get file position"
+msgstr "%s：無法刪除分割區"
-#: mount-deprecated/mount.c:1780
+#: login-utils/utmpdump.c:185
#, c-format
-msgid "mount: %s: can't read superblock"
-msgstr "mount：%s: 無法讀取超區塊"
+msgid "%s: cannot add inotify watch."
+msgstr "%s：無法加入 inotify 監看。"
-#: mount-deprecated/mount.c:1786
+#: login-utils/utmpdump.c:194
#, c-format
-msgid "mount: %s: unknown device"
-msgstr "mount：%s: 不明的裝置"
+msgid "%s: cannot read inotify events"
+msgstr "%s：無法讀取 inotify 事件"
-#: mount-deprecated/mount.c:1791
-#, c-format
-msgid "mount: unknown filesystem type '%s'"
-msgstr "mount：不明的檔案系統類型「%s」"
+#: login-utils/utmpdump.c:254 login-utils/utmpdump.c:259
+#, fuzzy
+msgid "Extraneous newline in file. Exiting."
+msgstr "外來新列字元在中檔案。離開。"
-#: mount-deprecated/mount.c:1803
-#, c-format
-msgid "mount: probably you meant %s"
-msgstr "mount：您的意思大概是 %s"
+#: login-utils/utmpdump.c:318
+#, fuzzy, c-format
+msgid " %s [options] [filename]\n"
+msgstr " %s [選項] [檔名]\n"
-#: mount-deprecated/mount.c:1806
-msgid "mount: maybe you meant 'iso9660'?"
-msgstr "mount：也許您的意思是「iso9660」？"
+#: login-utils/utmpdump.c:321
+msgid "Dump UTMP and WTMP files in raw format.\n"
+msgstr ""
-#: mount-deprecated/mount.c:1809
-msgid "mount: maybe you meant 'vfat'?"
-msgstr "mount：也許您的意思是「vfat」？"
+#: login-utils/utmpdump.c:324
+#, fuzzy
+msgid " -f, --follow output appended data as the file grows\n"
+msgstr ""
+" -f, --follow 輸出附加的資料做為檔案 grows\n"
+" -r, --reverse 寫入上一步傾印的資料進入 utmp 檔案\n"
-#: mount-deprecated/mount.c:1812
-#, c-format
-msgid "mount: %s has wrong device number or fs type %s not supported"
-msgstr "mount：%s 有錯誤的裝置編號，或是不支援檔案系統類型 %s"
+#: login-utils/utmpdump.c:325
+#, fuzzy
+msgid " -r, --reverse write back dumped data into utmp file\n"
+msgstr ""
+" -f, --follow 輸出附加的資料做為檔案 grows\n"
+" -r, --reverse 寫入上一步傾印的資料進入 utmp 檔案\n"
-#: mount-deprecated/mount.c:1820
-#, c-format
-msgid "mount: %s is not a block device, and stat fails?"
-msgstr "mount：%s 並非一個區塊裝置，而且取得狀態時失敗？"
+#: login-utils/utmpdump.c:326
+#, fuzzy
+msgid " -o, --output <file> write to file instead of standard output\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
-#: mount-deprecated/mount.c:1822
-#, c-format
-msgid ""
-"mount: the kernel does not recognize %s as a block device\n"
-" (maybe `modprobe driver'?)"
-msgstr ""
-"mount：內核無法識別 %s 為一個區塊裝置\n"
-" (也許要用「modprobe driver」?)"
+#: login-utils/utmpdump.c:394
+#, fuzzy
+msgid "following standard input is unsupported"
+msgstr "下列標準輸入被不受支援的"
-#: mount-deprecated/mount.c:1825
-#, c-format
-msgid "mount: %s is not a block device (maybe try `-o loop'?)"
-msgstr "mount：%s 並非一個區塊裝置 (也許試試「-o loop」?)"
+#: login-utils/utmpdump.c:400
+#, fuzzy, c-format
+msgid "Utmp undump of %s\n"
+msgstr "Utmp undump 的 %s\n"
-#: mount-deprecated/mount.c:1828
-#, c-format
-msgid "mount: %s is not a block device"
-msgstr "mount：%s 並非一個區塊裝置"
+#: login-utils/utmpdump.c:403
+#, fuzzy, c-format
+msgid "Utmp dump of %s\n"
+msgstr "Utmp 傾印的 %s\n"
-#: mount-deprecated/mount.c:1833
-#, c-format
-msgid "mount: %s is not a valid block device"
-msgstr "mount：%s 並非有效的區塊裝置"
+#: login-utils/vipw.c:132
+#, fuzzy
+msgid "can't open temporary file"
+msgstr "無法開啟暫存檔"
-#: mount-deprecated/mount.c:1836
-msgid "block device "
-msgstr "區塊裝置 "
+#: login-utils/vipw.c:152
+#, fuzzy, c-format
+msgid "%s: create a link to %s failed"
+msgstr "%s：建立連結到 %s 失敗"
-#: mount-deprecated/mount.c:1838
-#, c-format
-msgid "mount: cannot mount %s%s read-only"
-msgstr "mount：無法以唯讀方式掛載 %s%s"
+#: login-utils/vipw.c:160
+#, fuzzy, c-format
+msgid "Can't get context for %s"
+msgstr "無法提取語境用於 %s"
-#: mount-deprecated/mount.c:1842
-#, c-format
-msgid "mount: %s%s is write-protected but explicit `-w' flag given"
-msgstr "mount：%s%s 為防寫，但卻明確給定了「-w」旗標"
+#: login-utils/vipw.c:166
+#, fuzzy, c-format
+msgid "Can't set context for %s"
+msgstr "無法設定語境用於 %s"
-#: mount-deprecated/mount.c:1846
-#, c-format
-msgid "mount: cannot remount %s%s read-write, is write-protected"
-msgstr "mount：無法重新將 %s%s 掛載成可讀可寫，其為防寫的"
+#: login-utils/vipw.c:235
+#, fuzzy, c-format
+msgid "%s unchanged"
+msgstr "%s 未變更"
-#: mount-deprecated/mount.c:1861
-#, c-format
-msgid "mount: %s%s is write-protected, mounting read-only"
-msgstr "mount：%s%s 為防寫，即將以唯讀方式掛載"
+#: login-utils/vipw.c:253
+#, fuzzy
+msgid "cannot get lock"
+msgstr "無法提取鎖定"
-#: mount-deprecated/mount.c:1869
-#, c-format
-msgid "mount: no medium found on %s"
-msgstr "mount：%s 中找不到任何媒體"
+#: login-utils/vipw.c:280
+#, fuzzy
+msgid "no changes made"
+msgstr "沒有變更所做"
-#: mount-deprecated/mount.c:1887 sys-utils/mount.c:309
-#, c-format
-msgid ""
-"mount: %s does not contain SELinux labels.\n"
-" You just mounted an file system that supports labels which does not\n"
-" contain labels, onto an SELinux box. It is likely that confined\n"
-" applications will generate AVC messages and not be allowed access to\n"
-" this file system. For more details see restorecon(8) and mount(8).\n"
+#: login-utils/vipw.c:289
+#, fuzzy
+msgid "cannot chmod file"
+msgstr "無法 chmod 檔案"
+
+#: login-utils/vipw.c:304
+msgid "Edit the password or group file.\n"
msgstr ""
-"mount：%s 不包含 SELinux 標籤。\n"
-" 您剛掛載了支援標籤的檔案系統，它卻在 SELinux 框上\n"
-" 不包含標籤。似乎受限的應用程式\n"
-" 將產生 AVC 訊息，並且不被允許去存取\n"
-" 這個檔案系統。要獲得更多細節請參看 restorecon(8) 和 mount(8)。\n"
-#: mount-deprecated/mount.c:1967
-#, c-format
-msgid "mount: no type was given - I'll assume nfs because of the colon\n"
-msgstr "mount：沒有給定任何類型 - 我將因為冒號而假設是 nfs\n"
+#: login-utils/vipw.c:356
+msgid "You are using shadow groups on this system.\n"
+msgstr "您正在這個系統中使用陰影群組。\n"
+
+#: login-utils/vipw.c:357
+msgid "You are using shadow passwords on this system.\n"
+msgstr "您正在這個系統中使用陰影密碼。\n"
-#: mount-deprecated/mount.c:1973
+#. TRANSLATORS: this program uses for y and n rpmatch(3),
+#. * which means they can be translated.
+#: login-utils/vipw.c:361
#, c-format
-msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
-msgstr "mount：沒有給定任何類型 - 我將因為 // 前綴而假設是 cifs\n"
+msgid "Would you like to edit %s now [y/n]? "
+msgstr "您現在想要編輯 %s 嗎[y/n]？"
-#: mount-deprecated/mount.c:2041
-#, fuzzy, c-format
-msgid "mount: ignore %s (unparsable offset= option)\n"
-msgstr "掛載：忽略 %s (unparsable 偏移=選項)\n"
+#: misc-utils/blkid.c:72
+#, c-format
+msgid ""
+" %s --label <label> | --uuid <uuid>\n"
+"\n"
+msgstr ""
-#: mount-deprecated/mount.c:2054
+#: misc-utils/blkid.c:73
#, c-format
-msgid "mount: %s already mounted on %s\n"
-msgstr "mount：%s 已經掛載到 %s\n"
+msgid ""
+" %s [--cache-file <file>] [-ghlLv] [--output <format>] [--match-tag <tag>] \n"
+" [--match-token <token>] [<dev> ...]\n"
+"\n"
+msgstr ""
-#: mount-deprecated/mount.c:2234
+#: misc-utils/blkid.c:75
#, c-format
msgid ""
-"Usage: mount -V : print version\n"
-" mount -h : print this help\n"
-" mount : list mounted filesystems\n"
-" mount -l : idem, including volume labels\n"
-"So far the informational part. Next the mounting.\n"
-"The command is `mount [-t fstype] something somewhere'.\n"
-"Details found in /etc/fstab may be omitted.\n"
-" mount -a [-t|-O] ... : mount all stuff from /etc/fstab\n"
-" mount device : mount device at the known place\n"
-" mount directory : mount known device here\n"
-" mount -t type dev dir : ordinary mount command\n"
-"Note that one does not really mount a device, one mounts\n"
-"a filesystem (of the given type) found on the device.\n"
-"One can also mount an already visible directory tree elsewhere:\n"
-" mount --bind olddir newdir\n"
-"or move a subtree:\n"
-" mount --move olddir newdir\n"
-"One can change the type of mount containing the directory dir:\n"
-" mount --make-shared dir\n"
-" mount --make-slave dir\n"
-" mount --make-private dir\n"
-" mount --make-unbindable dir\n"
-"One can change the type of all the mounts in a mount subtree\n"
-"containing the directory dir:\n"
-" mount --make-rshared dir\n"
-" mount --make-rslave dir\n"
-" mount --make-rprivate dir\n"
-" mount --make-runbindable dir\n"
-"A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
-"or by label, using -L label or by uuid, using -U uuid .\n"
-"Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
-"For many more details, say man 8 mount .\n"
-msgstr ""
-"用法：mount -V ：印出版本\n"
-" mount -h ：印出這個說明\n"
-" mount ：列出掛載的檔案系統\n"
-" mount -l ：idem，包含卷冊標籤\n"
-"目前為止是有關資訊部分。下列有關掛載。\n"
-"命令為「mount [-t fstype] something somewhere」。\n"
-"在 /etc/fstab 中找到的細節也許會被省略。\n"
-" mount -a [-t|-O]… ：依據 /etc/fstab 掛載所有項目\n"
-" mount device ：於已知位置掛載裝置\n"
-" mount directory ：在此掛載已知裝置\n"
-" mount -t type dev dir ：標準的掛載命令\n"
-"要注意的是，並非真正地掛載裝置，而是掛載一個\n"
-"在裝置中找到的檔案系統 (給定的類型)。\n"
-"已經可見的目錄樹也可以被掛載到其他地方：\n"
-" mount --bind olddir newdir\n"
-"或是移動子樹：\n"
-" mount --move olddir newdir\n"
-"也可以變更包含目錄 dir 的掛載類型：\n"
-" mount --make-shared dir\n"
-" mount --make-slave dir\n"
-" mount --make-private dir\n"
-" mount --make-unbindable dir\n"
-"包含目錄 dir 的掛載子樹中所有掛載的類型\n"
-"都可以變更：\n"
-" mount --make-rshared dir\n"
-" mount --make-rslave dir\n"
-" mount --make-rprivate dir\n"
-" mount --make-runbindable dir\n"
-"裝置可以由名稱給定，例如 /dev/hda1 或 /dev/cdrom，\n"
-"或是利用 -L label 經由標籤，或是利用 -U uuid 而經由 uuid。\n"
-"其他選項：[-nfFrsvw] [-o options] [-p passwdfd]。\n"
-"要獲得更多細節，就用 man 8 mount。\n"
-
-#: mount-deprecated/mount.c:2445 sys-utils/losetup.c:542 sys-utils/mount.c:905
-msgid "--pass-fd is no longer supported"
-msgstr ""
-
-#: mount-deprecated/mount.c:2552
-#, c-format
-msgid "mount: only root can do that (effective UID is %u)"
-msgstr "mount：只有 root 可以那樣做 (有效 UID 是 %u)"
-
-#: mount-deprecated/mount.c:2555
-msgid "mount: only root can do that"
-msgstr "mount：只有 root 可以那樣做"
-
-#: mount-deprecated/mount.c:2566
-msgid "nothing was mounted"
-msgstr "沒有掛載任何東西"
-
-#: mount-deprecated/mount.c:2584 mount-deprecated/mount.c:2610
-msgid "mount: no such partition found"
-msgstr "mount：找不到此類分割"
-
-#: mount-deprecated/mount.c:2587
-#, c-format
-msgid "mount: can't find %s in %s or %s"
-msgstr "mount：無法在 %2$s 或 %3$s 中找到 %1$s"
-
-#: mount-deprecated/mount_mntent.c:110
-#, c-format
-msgid "[mntent]: warning: no final newline at the end of %s\n"
-msgstr "[mntent]：警告：在 %s 的結尾沒有最後的換列字元\n"
-
-#: mount-deprecated/mount_mntent.c:160
-#, c-format
-msgid "[mntent]: line %d in %s is bad%s\n"
-msgstr "[mntent]：在 %2$s 中的第 %1$d 列是不當的 %3$s\n"
-
-#: mount-deprecated/mount_mntent.c:163
-msgid "; rest of file ignored"
-msgstr "；忽略檔案的其餘部分"
-
-#: mount-deprecated/sundries.c:211 mount-deprecated/sundries.c:269
-#: mount-deprecated/sundries.c:284
-msgid "not enough memory"
-msgstr "記憶體不足"
+" %s -p [--match-tag <tag>] [--offset <offset>] [--size <size>] \n"
+" [--output <format>] <dev> ...\n"
+"\n"
+msgstr ""
-#: mount-deprecated/umount.c:43
+#: misc-utils/blkid.c:77
#, c-format
-msgid "umount: compiled without support for -f\n"
-msgstr "umount：編譯時未支援 -f\n"
+msgid " %s -i [--match-tag <tag>] [--output <format>] <dev> ...\n"
+msgstr ""
-#: mount-deprecated/umount.c:139
-#, fuzzy, c-format
-msgid "umount: cannot set group id: %m"
-msgstr "umount：無法設定群組識別號：%m"
+#: misc-utils/blkid.c:79
+#, fuzzy
+msgid ""
+" -c, --cache-file <file> read from <file> instead of reading from the default\n"
+" cache file (-c /dev/null means no cache)\n"
+msgstr ""
+" --noadjfile 不存取 %s；這個需求使用的\n"
+" 還是 --utc 或 --localtime\n"
+" --adjfile <file> 指定路徑到調整檔案；\n"
+" 預設是 %s\n"
-#: mount-deprecated/umount.c:142
-#, fuzzy, c-format
-msgid "umount: cannot set user id: %m"
-msgstr "umount：無法設定使用者識別號：%m"
+#: misc-utils/blkid.c:81
+#, fuzzy
+msgid " -d, --no-encoding don't encode non-printing characters\n"
+msgstr " -f 不分割長列\n"
-#: mount-deprecated/umount.c:171
-#, c-format
-msgid "umount: cannot fork: %s"
-msgstr "umount：無法衍生執行：%s"
+#: misc-utils/blkid.c:82
+msgid " -g, --garbage-collect garbage collect the blkid cache\n"
+msgstr ""
-#: mount-deprecated/umount.c:192
-#, c-format
-msgid "umount: %s: invalid block device"
-msgstr "umount：%s: 無效的區塊裝置"
+#: misc-utils/blkid.c:83
+msgid ""
+" -o, --output <format> output format; can be one of:\n"
+" value, device, export or full; (default: full)\n"
+msgstr ""
-#: mount-deprecated/umount.c:194
-#, c-format
-msgid "umount: %s: not mounted"
-msgstr "umount：%s: 未掛載"
+#: misc-utils/blkid.c:85
+#, fuzzy
+msgid " -k, --list-filesystems list all known filesystems/RAIDs and exit\n"
+msgstr " -l, --list-shells 列印命令殼清單的然後離開\n"
-#: mount-deprecated/umount.c:196
-#, c-format
-msgid "umount: %s: can't write superblock"
-msgstr "umount：%s: 無法寫入超區塊"
+#: misc-utils/blkid.c:86
+msgid " -s, --match-tag <tag> show specified tag(s) (default show all tags)\n"
+msgstr ""
-#: mount-deprecated/umount.c:200
-#, c-format
-msgid ""
-"umount: %s: device is busy.\n"
-" (In some cases useful info about processes that use\n"
-" the device is found by lsof(8) or fuser(1))"
+#: misc-utils/blkid.c:87
+msgid " -t, --match-token <token> find device with a specific token (NAME=value pair)\n"
msgstr ""
-"umount：%s：裝置忙碌中。\n"
-" (在某些情況下關於使用該裝置之行程的\n"
-" 有用資訊，可以藉由 lsof(8) 或 fuser(1) 找到)"
-#: mount-deprecated/umount.c:205
-#, c-format
-msgid "umount: %s: not found"
-msgstr "umount：%s: 找不到"
+#: misc-utils/blkid.c:88
+#, fuzzy
+msgid " -l, --list-one look up only first device with token specified by -t\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: mount-deprecated/umount.c:207
-#, c-format
-msgid "umount: %s: must be superuser to umount"
-msgstr "umount：%s: 必須是系統管理者才能 umount"
+#: misc-utils/blkid.c:89
+#, fuzzy
+msgid " -L, --label <label> convert LABEL to device name\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: mount-deprecated/umount.c:209
-#, c-format
-msgid "umount: %s: block devices not permitted on fs"
-msgstr "umount：%s: 區塊裝置在檔案系統中不被允許"
+#: misc-utils/blkid.c:90
+#, fuzzy
+msgid " -U, --uuid <uuid> convert UUID to device name\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: mount-deprecated/umount.c:211
-#, c-format
-msgid "umount: %s: %s"
-msgstr "umount：%s: %s"
+#: misc-utils/blkid.c:92
+#, fuzzy
+msgid "Low-level probing options:\n"
+msgstr "輸出格式：\n"
-#: mount-deprecated/umount.c:239
-#, fuzzy, c-format
-msgid "umount: internal error: invalid abs path: %s"
-msgstr "umount：內部錯誤：無效的 abs 路徑：%s"
+#: misc-utils/blkid.c:93
+#, fuzzy
+msgid " -p, --probe low-level superblocks probing (bypass cache)\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
-#: mount-deprecated/umount.c:254
-#, fuzzy, c-format
-msgid "umount: failed to chdir to %s: %m"
-msgstr "umount：無法 chdir 到 %s：%m"
+#: misc-utils/blkid.c:94
+#, fuzzy
+msgid " -i, --info gather information about I/O limits\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: mount-deprecated/umount.c:257
-#, fuzzy, c-format
-msgid "umount: failed to obtain current directory: %m"
-msgstr "umount：無法得到目前的目錄：%m"
+#: misc-utils/blkid.c:95
+#, fuzzy
+msgid " -H, --hint <value> set hint for probing function\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: mount-deprecated/umount.c:260
-#, fuzzy, c-format
-msgid "umount: mountpoint moved (%s -> %s)"
-msgstr "umount：mountpoint 移動 (%s -> %s)"
+#: misc-utils/blkid.c:96
+#, fuzzy
+msgid " -S, --size <size> overwrite device size\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: mount-deprecated/umount.c:263
-#, fuzzy, c-format
-msgid "current directory moved to %s\n"
-msgstr "目前的目錄移動到 %s\n"
+#: misc-utils/blkid.c:97
+#, fuzzy
+msgid " -O, --offset <offset> probe at the given offset\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: mount-deprecated/umount.c:328
-#, c-format
-msgid "no umount2, trying umount...\n"
-msgstr "沒有 umount2, 試試 umount…\n"
+#: misc-utils/blkid.c:98
+#, fuzzy
+msgid " -u, --usages <list> filter by \"usage\" (e.g. -u filesystem,raid)\n"
+msgstr " l 列出已知檔案系統類型"
-#: mount-deprecated/umount.c:348
-#, c-format
-msgid "umount: %s busy - remounted read-only\n"
-msgstr "umount：%s 忙碌中 - 已重新以唯讀掛載\n"
+#: misc-utils/blkid.c:99
+#, fuzzy
+msgid " -n, --match-types <list> filter by filesystem type (e.g. -n vfat,ext3)\n"
+msgstr " l 列出已知檔案系統類型"
-#: mount-deprecated/umount.c:366
-#, c-format
-msgid "umount: could not remount %s read-only\n"
-msgstr "umount：無法以唯讀重新掛載 %s\n"
+#: misc-utils/blkid.c:100
+#, fuzzy
+msgid " -D, --no-part-details don't print info from partition table\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: mount-deprecated/umount.c:375
-#, c-format
-msgid "%s has been unmounted\n"
-msgstr "%s 已卸載\n"
+#: misc-utils/blkid.c:106
+msgid "<size> and <offset>"
+msgstr ""
-#: mount-deprecated/umount.c:482
-msgid "umount: cannot find list of filesystems to unmount"
-msgstr "umount：找不到可卸載檔案系統的列表"
+#: misc-utils/blkid.c:108
+#, fuzzy
+msgid " <dev> specify device(s) to probe (default: all devices)\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: mount-deprecated/umount.c:514
-#, c-format
-msgid ""
-"Usage: umount -h | -V\n"
-" umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
-" umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
+#: misc-utils/blkid.c:240
+msgid "(mounted, mtpt unknown)"
msgstr ""
-"用法：umount -h | -V\n"
-" umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
-" umount [-d] [-f] [-r] [-n] [-v] 特殊 | 節點…\n"
-#: mount-deprecated/umount.c:558
+#: misc-utils/blkid.c:242
+#, fuzzy
+msgid "(in use)"
+msgstr "標記為使用中"
+
+#: misc-utils/blkid.c:244
+#, fuzzy
+msgid "(not mounted)"
+msgstr "%s：無法掛載"
+
+#: misc-utils/blkid.c:518 misc-utils/blkid.c:524
#, fuzzy, c-format
-msgid "failed to parse 'offset=%s' options\n"
-msgstr "剖析『偏移時失敗=%s』選項\n"
+msgid "error: %s"
+msgstr "剖析錯誤：%s"
-#: mount-deprecated/umount.c:566
+#: misc-utils/blkid.c:567
#, c-format
-msgid "device %s is associated with %s\n"
-msgstr "裝置 %s 與 %s 有所關聯\n"
+msgid "%s: ambivalent result (probably more filesystems on the device, use wipefs(8) to see more details)"
+msgstr ""
-#: mount-deprecated/umount.c:572
-#, c-format
-msgid "device %s is not associated with %s\n"
-msgstr "裝置 %s 未與 %s 有所關聯\n"
+#: misc-utils/blkid.c:613
+#, fuzzy, c-format
+msgid "unknown keyword in -u <list> argument: '%s'"
+msgstr "不明引數：%s"
-#: mount-deprecated/umount.c:606
-msgid "Cannot unmount \"\"\n"
-msgstr "無法卸載「」\n"
+#: misc-utils/blkid.c:630
+msgid "error: -u <list> argument is empty"
+msgstr ""
-#: mount-deprecated/umount.c:614
-#, c-format
-msgid "Trying to unmount %s\n"
-msgstr "嘗試卸載 %s\n"
+#: misc-utils/blkid.c:783
+#, fuzzy, c-format
+msgid "unsupported output format %s"
+msgstr "不受支援的引數：%s"
-#: mount-deprecated/umount.c:628
-msgid "umount: confused when analyzing mtab"
-msgstr "umount：分析 mtab 時感到困惑"
+#: misc-utils/blkid.c:786 misc-utils/fadvise.c:119 misc-utils/wipefs.c:734
+#, fuzzy
+msgid "invalid offset argument"
+msgstr "無效的偏移引數"
-#: mount-deprecated/umount.c:634
-#, c-format
-msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
-msgstr "umount：無法卸載 %s -- %s 被掛載於相同點之上"
+#: misc-utils/blkid.c:793
+#, fuzzy
+msgid "Too many tags specified"
+msgstr "未指定任何動作"
-#: mount-deprecated/umount.c:642
-#, c-format
-msgid "Could not find %s in mtab\n"
-msgstr "在 mtab 中找不到 %s\n"
+#: misc-utils/blkid.c:799 misc-utils/pipesz.c:273
+#, fuzzy
+msgid "invalid size argument"
+msgstr "無效的時間引數"
-#: mount-deprecated/umount.c:652
-#, fuzzy, c-format
-msgid "%s is associated with %s\n"
-msgstr "%s 被關聯的與 %s\n"
+#: misc-utils/blkid.c:803
+msgid "Can only search for one NAME=value pair"
+msgstr ""
-#: mount-deprecated/umount.c:658
-#, fuzzy, c-format
-msgid "umount: warning: %s is associated with more than one loop device\n"
-msgstr "umount：警告：%s 被關聯的與超過一個迴圈裝置\n"
+#: misc-utils/blkid.c:810
+msgid "-t needs NAME=value pair"
+msgstr ""
-#: mount-deprecated/umount.c:676
-#, c-format
-msgid "umount: %s is not mounted (according to mtab)"
-msgstr "umount：%s 未掛載 (根據 mtab)"
+#: misc-utils/blkid.c:816
+#, fuzzy, c-format
+msgid "%s from %s (libblkid %s, %s)\n"
+msgstr "%s 從 %s (libmount %s"
-#: mount-deprecated/umount.c:690
-#, c-format
-msgid "umount: it seems %s is mounted multiple times"
-msgstr "umount：%s 似乎已被多次掛載"
+#: misc-utils/blkid.c:889
+msgid "The low-level probing mode does not support 'list' output format"
+msgstr ""
-#: mount-deprecated/umount.c:704
-#, c-format
-msgid "umount: %s is not in the fstab (and you are not root)"
-msgstr "umount：%s 並不在 fstab 之中(而且您不是 root)"
+#: misc-utils/blkid.c:902
+msgid "The low-level probing mode requires a device"
+msgstr ""
-#: mount-deprecated/umount.c:710
-#, c-format
-msgid "umount: %s mount disagrees with the fstab"
-msgstr "umount：%s 掛載與 fstab 不相符"
+#: misc-utils/blkid.c:913
+#, fuzzy, c-format
+msgid "Failed to use probing hint: %s"
+msgstr "設定身分為 %s 時失敗"
-#: mount-deprecated/umount.c:751
-#, c-format
-msgid "umount: only %s can unmount %s from %s"
-msgstr "umount：只有 %1$s 可以從 %3$s 卸載 %2$s"
+#: misc-utils/blkid.c:956
+msgid "The lookup option requires a search type specified using -t"
+msgstr ""
-#: mount-deprecated/umount.c:848
-msgid "umount: only root can do that"
-msgstr "umount：只有 root 可以那樣做"
+#: misc-utils/cal.c:403
+#, fuzzy
+msgid "invalid month argument"
+msgstr "無效的長度引數"
-#: schedutils/chrt.c:63
+#: misc-utils/cal.c:411
+#, fuzzy
+msgid "invalid week argument"
+msgstr "無效的速度引數"
+
+#: misc-utils/cal.c:413
+#, fuzzy
+msgid "illegal week value: use 1-54"
+msgstr "不合法的日號：使用 1-%d"
+
+#: misc-utils/cal.c:471
#, fuzzy, c-format
-msgid ""
-"\n"
-"chrt - manipulate real-time attributes of a process\n"
-"\n"
-"Set policy:\n"
-" chrt [options] [<policy>] <priority> [-p <pid> | <command> [<arg>...]]\n"
-"\n"
-"Get policy:\n"
-" chrt [options] -p <pid>\n"
-msgstr ""
-"\n"
-" chrt - 操控行程的即時屬性\n"
-"\n"
-"設定策略：\n"
-" chrt [選項] <policy> <priority> {<pid> |<command> [<arg>...]}\n"
-"\n"
-"取得策略：\n"
-" chrt [選項] {<pid> | <command> [<arg>...]}\n"
+msgid "failed to parse timestamp or unknown month name: %s"
+msgstr "剖析大小時失敗"
-#: schedutils/chrt.c:70
-#, c-format
-msgid ""
-"\n"
-"Scheduling policies:\n"
-" -b | --batch set policy to SCHED_BATCH\n"
-" -f | --fifo set policy to SCHED_FIFO\n"
-" -i | --idle set policy to SCHED_IDLE\n"
-" -o | --other set policy to SCHED_OTHER\n"
-" -r | --rr set policy to SCHED_RR (default)\n"
-msgstr ""
-"\n"
-"排程策略：\n"
-" -b | --batch 設定策略為 SCHED_BATCH\n"
-" -f | --fifo 設定策略為 SCHED_FIFO\n"
-" -i | --idle 設定策略為 SCHED_IDLE\n"
-" -o | --other 設定策略為 SCHED_OTHER\n"
-" -r | --rr 設定策略為 SCHED_RR (預設)\n"
+#: misc-utils/cal.c:480
+#, fuzzy
+msgid "illegal day value"
+msgstr "不合法的天值"
-#: schedutils/chrt.c:79
+#: misc-utils/cal.c:482 misc-utils/cal.c:506
#, c-format
-msgid ""
-"\n"
-"Scheduling flags:\n"
-" -R | --reset-on-fork set SCHED_RESET_ON_FORK for FIFO or RR\n"
-msgstr ""
-"\n"
-"排程旗標：\n"
-" -R | --reset-on-fork 設定 SCHED_RESET_ON_FORK 用於 FIFO 或 RR\n"
+msgid "illegal day value: use 1-%d"
+msgstr "不合法的日號：使用 1-%d"
-#: schedutils/chrt.c:83
+#: misc-utils/cal.c:486 misc-utils/cal.c:494
+msgid "illegal month value: use 1-12"
+msgstr "不合法的月分：使用 1-12"
+
+#: misc-utils/cal.c:490
#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -a | --all-tasks operate on all the tasks (threads) for a given pid\n"
-" -h | --help display this help\n"
-" -m | --max show min and max valid priorities\n"
-" -p | --pid operate on existing given pid\n"
-" -v | --verbose display status information\n"
-" -V | --version output version information\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -a|--all-tasks 作用於所有事務 (執行緒) 用於給定的 pid\n"
-" -h|--help 顯示這份說明\n"
-" -m|--max 顯示最小和最大有效優先等級\n"
-" -p|--pid 作用於現有給定的 pid\n"
-" -v|--verbose 顯示狀態資訊\n"
-" -V|--version 輸出版本資訊\n"
-"\n"
+msgid "unknown month name: %s"
+msgstr "不明優先權名稱：%s。"
-#: schedutils/chrt.c:105
-#, c-format
-msgid "failed to get pid %d's policy"
-msgstr "取得 pid %d 的策略時失敗"
+#: misc-utils/cal.c:497 misc-utils/cal.c:501
+#, fuzzy
+msgid "illegal year value"
+msgstr "不合法的天值"
-#: schedutils/chrt.c:108
-#, c-format
-msgid "pid %d's new scheduling policy: "
-msgstr "pid %d 新的排程策略："
+#: misc-utils/cal.c:499
+#, fuzzy
+msgid "illegal year value: use positive integer"
+msgstr "不合法的年分：使用 1-9999"
-#: schedutils/chrt.c:110
+#: misc-utils/cal.c:535 misc-utils/cal.c:548
#, c-format
-msgid "pid %d's current scheduling policy: "
-msgstr "pid %d 目前的排程策略："
+msgid "illegal week value: year %d doesn't have week %d"
+msgstr ""
-#: schedutils/chrt.c:143
-#, fuzzy
-msgid "unknown scheduling policy"
-msgstr "不明排程策略"
+#: misc-utils/cal.c:1270
+#, fuzzy, c-format
+msgid " %s [options] [[[day] month] year]\n"
+msgstr " %s [選項] [[[天] 月] 年]\n"
-#: schedutils/chrt.c:147
-#, c-format
-msgid "failed to get pid %d's attributes"
-msgstr "取得 pid %d 的屬性時失敗"
+#: misc-utils/cal.c:1271
+#, fuzzy, c-format
+msgid " %s [options] <timestamp|monthname>\n"
+msgstr " %s [選項] <filename>\n"
-#: schedutils/chrt.c:150
-#, c-format
-msgid "pid %d's new scheduling priority: %d\n"
-msgstr "pid %d 新的排程優先權：%d\n"
+#: misc-utils/cal.c:1274
+msgid "Display a calendar, or some part of it.\n"
+msgstr ""
-#: schedutils/chrt.c:153
-#, c-format
-msgid "pid %d's current scheduling priority: %d\n"
-msgstr "pid %d 目前的排程優先權：%d\n"
+#: misc-utils/cal.c:1275
+msgid "Without any arguments, display the current month.\n"
+msgstr ""
-#: schedutils/chrt.c:188
-#, c-format
-msgid "SCHED_%s min/max priority\t: %d/%d\n"
-msgstr "SCHED_%s 最小/最大優先權\t：%d/%d\n"
+#: misc-utils/cal.c:1278
+#, fuzzy
+msgid " -1, --one show only a single month (default)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: schedutils/chrt.c:191
-#, c-format
-msgid "SCHED_%s not supported?\n"
-msgstr "SCHED_%s 不被支援？\n"
+#: misc-utils/cal.c:1279
+#, fuzzy
+msgid " -3, --three show three months spanning the date\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: schedutils/chrt.c:287 schedutils/chrt.c:320
+#: misc-utils/cal.c:1280
#, fuzzy
-msgid "cannot obtain the list of tasks"
-msgstr "無法得到事務清單的"
+msgid " -n, --months <num> show num months starting with date's month\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: schedutils/chrt.c:299
+#: misc-utils/cal.c:1281
#, fuzzy
-msgid "invalid priority argument"
-msgstr "無效的優先權引數"
+msgid " -S, --span span the date when displaying multiple months\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-#: schedutils/chrt.c:305
+#: misc-utils/cal.c:1282
#, fuzzy
-msgid ""
-"SCHED_RESET_ON_FORK flag is supported for SCHED_FIFO and SCHED_RR policies "
-"only"
-msgstr "SCHED_RESET_ON_FORK 旗標只被支援用於 SCHED_FIFO 和 SCHED_RR 策略"
+msgid " -s, --sunday Sunday as first day of week\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: schedutils/chrt.c:323
-#, fuzzy, c-format
-msgid "failed to set tid %d's policy"
-msgstr "設定 tid %d's 策略時失敗"
+#: misc-utils/cal.c:1283
+#, fuzzy
+msgid " -m, --monday Monday as first day of week\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: schedutils/chrt.c:326
-#, c-format
-msgid "failed to set pid %d's policy"
-msgstr "設定 pid %d 的策略時失敗"
+#: misc-utils/cal.c:1284
+#, fuzzy
+msgid " -j, --julian use day-of-year for all calendars\n"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: schedutils/ionice.c:76
-msgid "ioprio_get failed"
-msgstr "ioprio_get 失敗"
+#: misc-utils/cal.c:1285
+msgid " --reform <val> Gregorian reform date (1752|gregorian|iso|julian)\n"
+msgstr ""
-#: schedutils/ionice.c:85
-#, fuzzy, c-format
-msgid "%s: prio %lu\n"
-msgstr "%s：選項 "
+#: misc-utils/cal.c:1286
+#, fuzzy
+msgid " --iso alias for --reform=iso\n"
+msgstr " t - 分割表以原始格式顯示"
-#: schedutils/ionice.c:98
-msgid "ioprio_set failed"
-msgstr "ioprio_set 失敗"
+#: misc-utils/cal.c:1287
+#, fuzzy
+msgid " -y, --year show the whole year\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: schedutils/ionice.c:104
-#, fuzzy, c-format
-msgid ""
-"\n"
-"%1$s - sets or gets process io scheduling class and priority.\n"
-"\n"
-"Usage:\n"
-" %1$s [OPTION] -p PID [PID...]\n"
-" %1$s [OPTION] COMMAND\n"
-"\n"
-"Options:\n"
-" -c, --class <class> scheduling class name or number\n"
-" 0: none, 1: realtime, 2: best-effort, 3: idle\n"
-" -n, --classdata <num> scheduling class data\n"
-" 0-7 for realtime and best-effort classes\n"
-" -p, --pid=PID view or modify already running process\n"
-" -t, --ignore ignore failures\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
+#: misc-utils/cal.c:1288
+#, fuzzy
+msgid " -Y, --twelve show the next twelve months\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: misc-utils/cal.c:1289
+msgid " -w, --week[=<num>] show US or ISO-8601 week numbers\n"
msgstr ""
-"\n"
-"%1$s - 集合或提取處理 io 排程類別和優先權。\n"
-"\n"
-"用法：\n"
-" %1$s [選項] -p PID [PID...]\n"
-" %1$s [選項] 命令\n"
-"\n"
-"選項：\n"
-" -c, --class <class> 排程類別名稱或數字\n"
-" 0:無，1:realtime，2:盡力，3:閒置\n"
-" -n, --classdata<num>排程類別資料\n"
-" 0-7 用於 realtime 和盡力類別\n"
-" -p, --pid=PID 檢視或修改已經執行中處理\n"
-" -t, --ignore 忽略失敗\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
-#: schedutils/ionice.c:148
+#: misc-utils/cal.c:1290
#, fuzzy
-msgid "invalid class data argument"
-msgstr "無效的類別資料引數"
+msgid " -v, --vertical show day vertically instead of line\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: schedutils/ionice.c:154
+#: misc-utils/cal.c:1291
#, fuzzy
-msgid "invalid class argument"
-msgstr "無效的類別引數"
+msgid " -c, --columns <width> amount of columns to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: schedutils/ionice.c:159
+#: misc-utils/cal.c:1293
#, fuzzy, c-format
-msgid "unknown scheduling class: '%s'"
-msgstr "不明排程類別：『%s』"
-
-#: schedutils/ionice.c:183
-msgid "ignoring given class data for none class"
-msgstr "忽略給定的無類別資料"
+msgid " --color[=<when>] colorize messages (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: schedutils/ionice.c:191
-msgid "ignoring given class data for idle class"
-msgstr "忽略給定的閒置類別資料"
+#: misc-utils/fadvise.c:49
+#, fuzzy, c-format
+msgid " %s [options] file\n"
+msgstr " %s [選項] 檔案\n"
-#: schedutils/ionice.c:196
+#: misc-utils/fadvise.c:50
#, fuzzy, c-format
-msgid "unknown prio class %d"
-msgstr "不明 prio 類別 %d"
+msgid " %s [options] --fd|-d file-descriptor\n"
+msgstr " %s [選項] 檔案\n"
-#: schedutils/taskset.c:52
-#, c-format
-msgid ""
-"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
-"\n"
+#: misc-utils/fadvise.c:53
+msgid " -a, --advice <advice> applying advice to the file (default: \"dontneed\")\n"
msgstr ""
-"用法：%s [選項] [遮罩| cpu-list] [pid|cmd [引數...]]\n"
-"\n"
-#: schedutils/taskset.c:56
-#, fuzzy, c-format
-msgid ""
-"Options:\n"
-" -a, --all-tasks operate on all the tasks (threads) for a given pid\n"
-" -p, --pid operate on existing given pid\n"
-" -c, --cpu-list display and specify cpus in list format\n"
-" -h, --help display this help\n"
-" -V, --version output version information\n"
-"\n"
-msgstr ""
-"選項：\n"
-" -a, --all-tasks 作用於所有事務 (執行緒) 用於給定的 pid\n"
-" -p, --pid 作用於現有給定的 pid\n"
-" -c, --cpu-list 顯示和指定 cpus 在中清單格式\n"
-" -h, --help 顯示這份說明\n"
-" -V, --version 輸出版本資訊\n"
-"\n"
+#: misc-utils/fadvise.c:54
+#, fuzzy
+msgid " -l, --length <num> length for range operations, in bytes\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: schedutils/taskset.c:64
-#, c-format
-msgid ""
-"The default behavior is to run a new command:\n"
-" %1$s 03 sshd -b 1024\n"
-"You can retrieve the mask of an existing task:\n"
-" %1$s -p 700\n"
-"Or set it:\n"
-" %1$s -p 03 700\n"
-"List format uses a comma-separated list instead of a mask:\n"
-" %1$s -pc 0,3,7-11 700\n"
-"Ranges in list format can take a stride argument:\n"
-" e.g. 0-31:2 is equivalent to mask 0x55555555\n"
-msgstr ""
-"預設行為是執行新的命令：\n"
-" %1$s 03 sshd -b 1024\n"
-"您可以取回現有任務的遮罩：\n"
-" %1$s -p 700\n"
-"或設定它：\n"
-" %1$s -p 03 700\n"
-"清單格式使用以逗號分隔的清單以代替遮罩：\n"
-" %1$s -pc 0,3,7-11 700\n"
-"清單格式中的範圍可以加上一個跨越引數：\n"
-" 例如：0-31:2 相當於遮罩 0x55555555\n"
+#: misc-utils/fadvise.c:55
+#, fuzzy
+msgid " -o, --offset <num> offset for range operations, in bytes\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: schedutils/taskset.c:76
-#, c-format
+#: misc-utils/fadvise.c:60
+#, fuzzy
msgid ""
"\n"
-"For more information see taskset(1).\n"
+"Available values for advice:\n"
msgstr ""
"\n"
-"要獲得更多資訊請參看 taskset(1)。\n"
-
-#: schedutils/taskset.c:87
-#, c-format
-msgid "pid %d's new affinity list: %s\n"
-msgstr "pid %d 新的近似者清單：%s\n"
+"可用欄位 (用於 --show)：\n"
-#: schedutils/taskset.c:88
-#, c-format
-msgid "pid %d's current affinity list: %s\n"
-msgstr "pid %d 目前的近似者清單：%s\n"
+#: misc-utils/fadvise.c:111 misc-utils/pipesz.c:263 misc-utils/pipesz.c:335
+#, fuzzy
+msgid "invalid fd argument"
+msgstr "無效的速度引數"
-#: schedutils/taskset.c:91
-#, c-format
-msgid "pid %d's new affinity mask: %s\n"
-msgstr "pid %d 新的近似者遮罩：%s\n"
+#: misc-utils/fadvise.c:131 misc-utils/fincore.c:339 sys-utils/losetup.c:828
+#, fuzzy
+msgid "no file specified"
+msgstr "沒有檔案指定的"
-#: schedutils/taskset.c:92
-#, c-format
-msgid "pid %d's current affinity mask: %s\n"
-msgstr "pid %d 目前的近似者遮罩：%s\n"
+#: misc-utils/fadvise.c:136
+#, fuzzy
+msgid "specify either file descriptor or file name"
+msgstr "旗標描述"
-#: schedutils/taskset.c:96
+#: misc-utils/fadvise.c:141
#, fuzzy
-msgid "internal error: conversion from cpuset to string failed"
-msgstr "轉換從 cpuset 到字串失敗"
+msgid "specify one file descriptor or file name"
+msgstr "旗標描述"
-#: schedutils/taskset.c:106 schedutils/taskset.c:122
-#, c-format
-msgid "failed to get pid %d's affinity"
-msgstr "取得 pid %d 的近似者時失敗"
+#: misc-utils/fadvise.c:156
+#, fuzzy, c-format
+msgid "failed to advise: %s"
+msgstr "讀取速度時失敗"
-#: schedutils/taskset.c:116
-#, c-format
-msgid "failed to set pid %d's affinity"
-msgstr "設定 pid %d 的近似者時失敗"
+#: misc-utils/fincore.c:61
+#, fuzzy
+msgid "file data resident in memory in pages"
+msgstr "共用記憶體識別號：%d\n"
-#: schedutils/taskset.c:184 sys-utils/chcpu.c:263
-msgid "cannot determine NR_CPUS; aborting"
-msgstr "無法決定 NR_CPUS；放棄"
+#: misc-utils/fincore.c:62
+#, fuzzy
+msgid "file data resident in memory in bytes"
+msgstr "共用記憶體識別號：%d\n"
-#: schedutils/taskset.c:193 schedutils/taskset.c:206 sys-utils/chcpu.c:269
-msgid "cpuset_alloc failed"
-msgstr "cpuset_alloc 失敗"
+#: misc-utils/fincore.c:63
+#, fuzzy
+msgid "size of the file"
+msgstr "大小的裝置"
+
+#: misc-utils/fincore.c:64
+#, fuzzy
+msgid "file name"
+msgstr "檔名"
-#: schedutils/taskset.c:213 sys-utils/chcpu.c:209
+#: misc-utils/fincore.c:174
#, fuzzy, c-format
-msgid "failed to parse CPU list: %s"
-msgstr "剖析 CPU 清單時失敗：%s"
+msgid "failed to do mincore: %s"
+msgstr "讀取符號連結時失敗：%s"
-#: schedutils/taskset.c:216
+#: misc-utils/fincore.c:211
#, fuzzy, c-format
-msgid "failed to parse CPU mask: %s"
-msgstr "剖析 CPU 遮罩時失敗：%s"
+msgid "failed to do mmap: %s"
+msgstr "讀取時失敗：%s"
+
+#: misc-utils/fincore.c:237
+#, fuzzy, c-format
+msgid "failed to open: %s"
+msgstr "%s：開啟失敗：%s\n"
+
+#: misc-utils/fincore.c:242
+#, fuzzy, c-format
+msgid "failed to do fstat: %s"
+msgstr "讀取時失敗：%s"
-#: sys-utils/blkdiscard.c:58
+#: misc-utils/fincore.c:263
+#, fuzzy, c-format
+msgid " %s [options] file...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: misc-utils/fincore.c:266
#, fuzzy
-msgid ""
-" -o, --offset <num> offset in bytes to discard from\n"
-" -l, --length <num> length of bytes to discard from the offset\n"
-" -s, --secure perform secure discard\n"
-" -v, --verbose print aligned length and offset\n"
-msgstr ""
-" -o, --offset <num> 偏移在中位元組到捨棄從\n"
-" -l, --length<num> 長度的位元組到捨棄從偏移\n"
-" -m, --minimum<num>最小延伸長度到捨棄\n"
-" -v, --verbose 列印捨棄的位元組數量\n"
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/blkdiscard.c:105 sys-utils/fstrim.c:106
-#: text-utils/hexsyntax.c:104
+#: misc-utils/fincore.c:267
#, fuzzy
-msgid "failed to parse length"
-msgstr "剖析長度時失敗"
+msgid " -b, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/blkdiscard.c:109 sys-utils/fstrim.c:110 sys-utils/losetup.c:534
-#: text-utils/hexsyntax.c:111
+#: misc-utils/fincore.c:268
#, fuzzy
-msgid "failed to parse offset"
-msgstr "剖析偏移時失敗"
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/blkdiscard.c:124
+#: misc-utils/fincore.c:269
#, fuzzy
-msgid "no device specified"
-msgstr "沒有迴圈裝置指定的"
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/blkdiscard.c:129 sys-utils/fallocate.c:147
-#: sys-utils/fsfreeze.c:118 sys-utils/fstrim.c:131
-msgid "unexpected number of arguments"
-msgstr "未預期的引數數量"
+#: misc-utils/fincore.c:270
+#, fuzzy
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/blkdiscard.c:143
-#, fuzzy, c-format
-msgid "%s: BLKGETSIZE64 ioctl failed"
-msgstr "BLKGETSIZE ioctl 失敗的於 %s"
+#: misc-utils/findfs.c:28
+#, c-format
+msgid " %s [options] {LABEL,UUID,PARTUUID,PARTLABEL}=<value>\n"
+msgstr ""
-#: sys-utils/blkdiscard.c:145
-#, fuzzy, c-format
-msgid "%s: BLKSSZGET ioctl failed"
-msgstr "%s：FITRIM ioctl 失敗"
+#: misc-utils/findfs.c:32
+#, fuzzy
+msgid "Find a filesystem by label or UUID.\n"
+msgstr "強制檢查 %s 檔案系統。\n"
-#: sys-utils/blkdiscard.c:158
-#, fuzzy, c-format
-msgid "%s: BLKSECDISCARD ioctl failed"
-msgstr "%s：FITRIM ioctl 失敗"
+#: misc-utils/findfs.c:74
+#, c-format
+msgid "unable to resolve '%s'"
+msgstr "無法解決「%s」"
-#: sys-utils/blkdiscard.c:161
-#, fuzzy, c-format
-msgid "%s: BLKDISCARD ioctl failed"
-msgstr "%s：FITRIM ioctl 失敗"
+#: misc-utils/findmnt.c:103
+#, fuzzy
+msgid "action detected by --poll"
+msgstr "動作偵測到由 --poll"
-#. TRANSLATORS: The standard value here is a very large number.
-#: sys-utils/blkdiscard.c:166
-#, c-format
-msgid "%s: Discarded %<PRIu64> bytes from the offset %<PRIu64>\n"
+#: misc-utils/findmnt.c:104 misc-utils/lsblk.c:179
+#, fuzzy
+msgid "filesystem size available"
+msgstr "檔案系統大小可用"
+
+#: misc-utils/findmnt.c:105
+msgid "dump(8) period in days [fstab only]"
msgstr ""
-#: sys-utils/chcpu.c:79 sys-utils/chcpu.c:161
-#, fuzzy, c-format
-msgid "CPU %d does not exist\n"
-msgstr "CPU %d 不存在\n"
+#: misc-utils/findmnt.c:106
+#, fuzzy
+msgid "filesystem root"
+msgstr "檔案系統根"
-#: sys-utils/chcpu.c:83
-#, fuzzy, c-format
-msgid "CPU %d is not hot pluggable\n"
-msgstr "CPU %d 不是熱門 pluggable\n"
+#: misc-utils/findmnt.c:107 misc-utils/lsblk.c:182
+#, fuzzy
+msgid "filesystem type"
+msgstr "檔案系統型態"
-#: sys-utils/chcpu.c:88
-#, fuzzy, c-format
-msgid "CPU %d is already enabled\n"
-msgstr "CPU %d 已經已啟用\n"
+#: misc-utils/findmnt.c:108
+#, fuzzy
+msgid "FS specific mount options"
+msgstr "FS 特定的掛載選項"
-#: sys-utils/chcpu.c:92
-#, fuzzy, c-format
-msgid "CPU %d is already disabled\n"
-msgstr "CPU %d 已經已停用\n"
+#: misc-utils/findmnt.c:109
+#, fuzzy
+msgid "mount ID"
+msgstr "掛載"
-#: sys-utils/chcpu.c:100
-#, fuzzy, c-format
-msgid "CPU %d enable failed (CPU is deconfigured)"
-msgstr "CPU %d 啟用失敗 (CPU 被 deconfigured)\n"
+#: misc-utils/findmnt.c:110
+#, fuzzy
+msgid "filesystem label"
+msgstr "檔案系統標貼"
-#: sys-utils/chcpu.c:103
-#, fuzzy, c-format
-msgid "CPU %d enable failed"
-msgstr "CPU %d 啟用失敗 (%m)\n"
+#: misc-utils/findmnt.c:111 misc-utils/lsblk.c:192 misc-utils/lslocks.c:80
+#, fuzzy
+msgid "major:minor device number"
+msgstr "主要的：次級裝置數字"
-#: sys-utils/chcpu.c:105
-#, fuzzy, c-format
-msgid "CPU %d enabled\n"
-msgstr "CPU %d 已啟用\n"
+#: misc-utils/findmnt.c:112
+#, fuzzy
+msgid "old mount options saved by --poll"
+msgstr "舊的掛載選項儲存的由 --poll"
-#: sys-utils/chcpu.c:108
-#, fuzzy, c-format
-msgid "CPU %d disable failed (last enabled CPU)\n"
-msgstr "CPU %d 停用失敗 (最後一筆已啟用 CPU)\n"
+#: misc-utils/findmnt.c:113
+#, fuzzy
+msgid "old mountpoint saved by --poll"
+msgstr "舊的 mountpoint 儲存的由 --poll"
-#: sys-utils/chcpu.c:114
-#, fuzzy, c-format
-msgid "CPU %d disable failed"
-msgstr "CPU %d 停用失敗 (%m)\n"
+#: misc-utils/findmnt.c:114
+#, fuzzy
+msgid "all mount options"
+msgstr "所有掛載選項"
-#: sys-utils/chcpu.c:116
-#, fuzzy, c-format
-msgid "CPU %d disabled\n"
-msgstr "CPU %d 已停用\n"
+#: misc-utils/findmnt.c:115
+#, fuzzy
+msgid "optional mount fields"
+msgstr "mount：掛載時失敗"
-#: sys-utils/chcpu.c:128
+#: misc-utils/findmnt.c:116
#, fuzzy
-msgid "This system does not support rescanning of CPUs"
-msgstr "這個系統不支援重新掃描的 CPUs"
+msgid "mount parent ID"
+msgstr "掛載"
-#: sys-utils/chcpu.c:130
+#: misc-utils/findmnt.c:117
#, fuzzy
-msgid "Failed to trigger rescan of CPUs"
-msgstr "觸發重新掃描的 CPUs 時失敗"
+msgid "partition label"
+msgstr "分割標貼"
-#: sys-utils/chcpu.c:131
-#, fuzzy, c-format
-msgid "Triggered rescan of CPUs\n"
-msgstr "觸發的重新掃描的 CPUs\n"
+#: misc-utils/findmnt.c:119
+msgid "pass number on parallel fsck(8) [fstab only]"
+msgstr ""
-#: sys-utils/chcpu.c:138
+#: misc-utils/findmnt.c:120
#, fuzzy
-msgid "This system does not support setting the dispatching mode of CPUs"
-msgstr "這個系統不支援設定派送模式的 CPUs"
+msgid "VFS propagation flags"
+msgstr "分割旗標"
-#: sys-utils/chcpu.c:142
+#: misc-utils/findmnt.c:121 misc-utils/lsblk.c:181
#, fuzzy
-msgid "Failed to set horizontal dispatch mode"
-msgstr "設定水平派送模式時失敗"
+msgid "filesystem size"
+msgstr "檔案系統大小"
-#: sys-utils/chcpu.c:143
-#, fuzzy, c-format
-msgid "Successfully set horizontal dispatching mode\n"
-msgstr "成功設定水平派送模式\n"
+#: misc-utils/findmnt.c:122
+#, fuzzy
+msgid "all possible source devices"
+msgstr "來源裝置"
-#: sys-utils/chcpu.c:146
+#: misc-utils/findmnt.c:123
#, fuzzy
-msgid "Failed to set vertical dispatch mode"
-msgstr "設定垂直派送模式時失敗"
+msgid "source device"
+msgstr "來源裝置"
-#: sys-utils/chcpu.c:147
-#, fuzzy, c-format
-msgid "Successfully set vertical dispatching mode\n"
-msgstr "成功設定垂直派送模式\n"
+#: misc-utils/findmnt.c:124
+#, fuzzy
+msgid "mountpoint"
+msgstr "mountpoint"
-#: sys-utils/chcpu.c:165
-#, fuzzy, c-format
-msgid "CPU %d is not configurable\n"
-msgstr "CPU %d 不是可組配的\n"
+#: misc-utils/findmnt.c:125
+#, fuzzy
+msgid "task ID"
+msgstr "任務識別號"
-#: sys-utils/chcpu.c:170
-#, fuzzy, c-format
-msgid "CPU %d is already configured\n"
-msgstr "CPU %d 已經已組配\n"
+#: misc-utils/findmnt.c:126 misc-utils/lsblk.c:183
+#, fuzzy
+msgid "filesystem size used"
+msgstr "檔案系統大小使用"
-#: sys-utils/chcpu.c:174
-#, fuzzy, c-format
-msgid "CPU %d is already deconfigured\n"
-msgstr "CPU %d 已經 deconfigured\n"
+#: misc-utils/findmnt.c:127 misc-utils/lsblk.c:184
+#, fuzzy
+msgid "filesystem use percentage"
+msgstr "檔案系統使用百分比"
-#: sys-utils/chcpu.c:179
-#, fuzzy, c-format
-msgid "CPU %d deconfigure failed (CPU is enabled)\n"
-msgstr "CPU %d deconfigure 失敗 (CPU 已啟用)\n"
+#: misc-utils/findmnt.c:128 misc-utils/lsblk.c:228
+#, fuzzy
+msgid "filesystem UUID"
+msgstr "檔案系統 UUID"
-#: sys-utils/chcpu.c:186
-#, fuzzy, c-format
-msgid "CPU %d configure failed"
-msgstr "CPU %d 組配失敗 (%m)\n"
+#: misc-utils/findmnt.c:129
+#, fuzzy
+msgid "VFS specific mount options"
+msgstr "VFS 特定的掛載選項"
-#: sys-utils/chcpu.c:188
+#: misc-utils/findmnt.c:340
#, fuzzy, c-format
-msgid "CPU %d configured\n"
-msgstr "CPU %d 已組配\n"
+msgid "unknown action: %s"
+msgstr "不明動作：%s"
-#: sys-utils/chcpu.c:192
-#, fuzzy, c-format
-msgid "CPU %d deconfigure failed"
-msgstr "CPU %d deconfigure 失敗 (%m)\n"
+#: misc-utils/findmnt.c:741
+#, fuzzy
+msgid "mount"
+msgstr "掛載"
-#: sys-utils/chcpu.c:194
-#, fuzzy, c-format
-msgid "CPU %d deconfigured\n"
-msgstr "CPU %d deconfigured\n"
+#: misc-utils/findmnt.c:744
+#, fuzzy
+msgid "umount"
+msgstr "umount"
-#: sys-utils/chcpu.c:208
-#, fuzzy, c-format
-msgid "invalid CPU number in CPU list: %s"
-msgstr "無效的 CPU 數字在中 CPU 清單：%s"
+#: misc-utils/findmnt.c:747
+#, fuzzy
+msgid "remount"
+msgstr "remount"
-#: sys-utils/chcpu.c:215 text-utils/col.c:121
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options]\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %s [選項]\n"
+#: misc-utils/findmnt.c:750
+#, fuzzy
+msgid "move"
+msgstr "移動"
-#: sys-utils/chcpu.c:218
+#: misc-utils/findmnt.c:927 misc-utils/findmnt.c:1205 sys-utils/eject.c:715
+#: sys-utils/mount.c:408
#, fuzzy
-msgid ""
-"\n"
-"Options:\n"
-" -h, --help print this help\n"
-" -e, --enable <cpu-list> enable cpus\n"
-" -d, --disable <cpu-list> disable cpus\n"
-" -c, --configure <cpu-list> configure cpus\n"
-" -g, --deconfigure <cpu-list> deconfigure cpus\n"
-" -p, --dispatch <mode> set dispatching mode\n"
-" -r, --rescan trigger rescan of cpus\n"
-" -V, --version output version information and exit\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -h, --help 印出這份說明\n"
-" -e, --enable <cpu-list> 啟用 cpus\n"
-" -d, --disable<cpu-list> 停用 cpus\n"
-" -c, --configure<cpu-list> 組配 cpus\n"
-" -g, --deconfigure<cpu-list> deconfigure cpus\n"
-" -p, --dispatch<模式> 設定派送模式\n"
-" -r, --rescan 觸發重新掃描的 cpus\n"
-" -V, --version 輸出版本資訊然後離開\n"
+msgid "failed to initialize libmount table"
+msgstr "初始化 libmount 表格時失敗"
-#: sys-utils/chcpu.c:300
+#: misc-utils/findmnt.c:954 text-utils/hexdump-parse.c:84
#, fuzzy, c-format
-msgid "unsupported argument: %s"
-msgstr "不受支援的引數：%s"
+msgid "can't read %s"
+msgstr "無法讀取 %s"
-#: sys-utils/ctrlaltdel.c:21
-#, fuzzy, c-format
-msgid " %s <hard|soft>\n"
-msgstr " %s <hard|soft>\n"
+#: misc-utils/findmnt.c:1145 misc-utils/findmnt.c:1211
+#: misc-utils/findmnt-verify.c:101 misc-utils/findmnt-verify.c:529
+#: sys-utils/fstrim.c:329 sys-utils/mount.c:134 sys-utils/mount.c:182
+#: sys-utils/mount.c:249 sys-utils/swapoff.c:63 sys-utils/swapoff.c:173
+#: sys-utils/swapon.c:247 sys-utils/swapon.c:290 sys-utils/swapon.c:750
+#: sys-utils/umount.c:199
+msgid "failed to initialize libmount iterator"
+msgstr "初始化 libmount 迭代器時失敗"
-#: sys-utils/ctrlaltdel.c:56
+#: misc-utils/findmnt.c:1217
#, fuzzy
-msgid "You must be root to set the Ctrl-Alt-Del behaviour"
-msgstr "您必須是根到設定 Ctrl-Alt-Del 行為"
-
-#: sys-utils/cytune.c:92
-#, fuzzy, c-format
-msgid " %s [options] <tty> [...]\n"
-msgstr " %s [選項] <tty> [...]\n"
+msgid "failed to initialize libmount tabdiff"
+msgstr "初始化 libmount tabdiff 時失敗"
-#: sys-utils/cytune.c:94
-#, fuzzy, c-format
-msgid " -s, --set-threshold <num> set interruption threshold value\n"
-msgstr " -s, --set-threshold <num> 設定插斷臨界值\n"
+#: misc-utils/findmnt.c:1245 misc-utils/kill.c:416
+#, fuzzy
+msgid "poll() failed"
+msgstr "意見調查() 失敗"
-#: sys-utils/cytune.c:95
-#, fuzzy, c-format
-msgid " -g, --get-threshold display current threshold value\n"
-msgstr " -g, --get-threshold 顯示目前的臨界值\n"
-
-#: sys-utils/cytune.c:96
-#, fuzzy, c-format
-msgid " -S, --set-default-threshold <num> set default threshold value\n"
-msgstr " -S, --set-default-threshold <num> 設定預設臨界值\n"
-
-#: sys-utils/cytune.c:97
-#, fuzzy, c-format
-msgid " -t, --set-flush <num> set flush timeout to value\n"
-msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-
-#: sys-utils/cytune.c:98
+#: misc-utils/findmnt.c:1320
#, fuzzy, c-format
msgid ""
-" -G, --get-glush display default flush timeout value\n"
-msgstr " -G, --get-glush 顯示預設清理逾時值\n"
+" %1$s [options]\n"
+" %1$s [options] <device> | <mountpoint>\n"
+" %1$s [options] <device> <mountpoint>\n"
+" %1$s [options] [--source <device>] [--target <path> | --mountpoint <dir>]\n"
+msgstr ""
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
-#: sys-utils/cytune.c:99
-#, fuzzy, c-format
-msgid ""
-" -T, --set-default-flush <num> set the default flush timeout to value\n"
-msgstr " -T, --set-default-flush <num> 設定預設清理逾時到值\n"
+#: misc-utils/findmnt.c:1327
+#, fuzzy
+msgid "Find a (mounted) filesystem.\n"
+msgstr "檔案系統型態"
-#: sys-utils/cytune.c:100
-#, fuzzy, c-format
-msgid " -q, --stats display statistics about the tty\n"
-msgstr " -q, --stats 顯示統計關於 tty\n"
+#: misc-utils/findmnt.c:1330
+#, fuzzy
+msgid " -s, --fstab search in static table of filesystems\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/cytune.c:101
-#, fuzzy, c-format
+#: misc-utils/findmnt.c:1331
+#, fuzzy
msgid ""
-" -i, --interval <seconds> gather statistics every <seconds> "
-"interval\n"
-msgstr " -i, --interval <seconds> 積聚統計每<秒>間隔\n"
+" -m, --mtab search in table of mounted filesystems\n"
+" (includes user space mount options)\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -s, --fstab 搜尋在中靜態表格的檔案系統\n"
+" -m, --mtab 搜尋在中表格的掛載的檔案系統\n"
+" -k, --kernel 搜尋在中內核表格的掛載\n"
+" 檔案系統 (預設)\n"
+"\n"
-#: sys-utils/cytune.c:132
-#, fuzzy, c-format
+#: misc-utils/findmnt.c:1333
+#, fuzzy
msgid ""
-"File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
-"and the maximum transfer rate in characters/second was %f"
+" -k, --kernel search in kernel table of mounted\n"
+" filesystems (default)\n"
msgstr ""
-"檔案 %s，用於臨界值 %lu，最大值字元在中 fifo 是 %d，\n"
-"和最大值轉送速率在中字元/秒是 %f"
+"\n"
+"選項：\n"
+" -s, --fstab 搜尋在中靜態表格的檔案系統\n"
+" -m, --mtab 搜尋在中表格的掛載的檔案系統\n"
+" -k, --kernel 搜尋在中內核表格的掛載\n"
+" 檔案系統 (預設)\n"
+"\n"
-#: sys-utils/cytune.c:141
-#, fuzzy, c-format
-msgid ""
-"File %s, For threshold value %lu and timeout value %lu, Maximum characters "
-"in fifo were %d,\n"
-"and the maximum transfer rate in characters/second was %f"
+#: misc-utils/findmnt.c:1336
+#, fuzzy
+msgid " -p, --poll[=<list>] monitor changes in table of mounted filesystems\n"
msgstr ""
-"檔案 %s，用於臨界值 %lu 和逾時值 %lu，最大值字元在中 fifo 是 %d，\n"
-"和最大值轉送速率在中字元/秒是 %f"
+" -p, --poll [=<list>] 監視器變更在中表格的掛載的檔案系統\n"
+" -w, --timeout<num> 上限在中毫秒該 --poll 將區塊\n"
+"\n"
-#: sys-utils/cytune.c:172 sys-utils/cytune.c:196 sys-utils/dmesg.c:482
-msgid "gettimeofday failed"
-msgstr "gettimeofday 失敗"
+#: misc-utils/findmnt.c:1337
+#, fuzzy
+msgid " -w, --timeout <num> upper limit in milliseconds that --poll will block\n"
+msgstr ""
+" -p, --poll [=<list>] 監視器變更在中表格的掛載的檔案系統\n"
+" -w, --timeout<num> 上限在中毫秒該 --poll 將區塊\n"
+"\n"
-#: sys-utils/cytune.c:181 sys-utils/cytune.c:204
-#, fuzzy, c-format
-msgid "cannot issue CYGETMON on %s"
-msgstr "無法議題 CYGETMON 於 %s"
+#: misc-utils/findmnt.c:1340
+#, fuzzy
+msgid " -A, --all disable all built-in filters, print all filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#: sys-utils/cytune.c:186 sys-utils/cytune.c:209 sys-utils/cytune.c:439
-#, fuzzy, c-format
-msgid "cannot get threshold for %s"
-msgstr "無法提取臨界值用於 %s"
+#: misc-utils/findmnt.c:1341
+#, fuzzy
+msgid " -a, --ascii use ASCII chars for tree formatting\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/cytune.c:189 sys-utils/cytune.c:214 sys-utils/cytune.c:444
-#, fuzzy, c-format
-msgid "cannot get timeout for %s"
-msgstr "無法提取逾時用於 %s"
+#: misc-utils/findmnt.c:1342
+#, fuzzy
+msgid " -b, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/cytune.c:247
-#, c-format
-msgid ""
-"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#: misc-utils/findmnt.c:1343
+msgid " -C, --nocanonicalize don't canonicalize when comparing paths\n"
msgstr ""
-"%s：%lu 間隔值，%lu/%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大"
-"值，%lu 當前值\n"
-#: sys-utils/cytune.c:253
-#, c-format
-msgid " %f int/sec; %f rec, %f send (char/sec)\n"
-msgstr " %f 間隔/秒；%f 記錄，%f 發送 (字元/秒)\n"
-
-#: sys-utils/cytune.c:256
-#, c-format
-msgid ""
-"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#: misc-utils/findmnt.c:1344
+msgid " -c, --canonicalize canonicalize printed paths\n"
msgstr ""
-"%s：%lu 間隔值，%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大值，%lu 當"
-"前值\n"
-#: sys-utils/cytune.c:261
-#, c-format
-msgid " %f int/sec; %f rec (char/sec)\n"
-msgstr " %f 間隔/秒；%f 記錄 (字元/秒)\n"
-
-#: sys-utils/cytune.c:326
+#: misc-utils/findmnt.c:1345
#, fuzzy
-msgid "Invalid interval value"
-msgstr "無效的間隔值"
+msgid " -D, --df imitate the output of df(1)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/cytune.c:328
-#, fuzzy, c-format
-msgid "Invalid interval value: %d"
-msgstr "無效的間隔值：%d"
+#: misc-utils/findmnt.c:1346
+msgid " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
+msgstr ""
-#: sys-utils/cytune.c:335
-#, fuzzy
-msgid "Invalid set value"
-msgstr "無效的設定值"
+#: misc-utils/findmnt.c:1347
+msgid ""
+" -e, --evaluate convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
+" to device names\n"
+msgstr ""
-#: sys-utils/cytune.c:337
-#, fuzzy, c-format
-msgid "Invalid set value: %d"
-msgstr "無效的設定值：%d"
+#: misc-utils/findmnt.c:1349
+msgid " -F, --tab-file <path> alternative file for -s, -m or -k options\n"
+msgstr ""
-#: sys-utils/cytune.c:344
+#: misc-utils/findmnt.c:1350
#, fuzzy
-msgid "Invalid default value"
-msgstr "無效的預設值"
-
-#: sys-utils/cytune.c:346
-#, fuzzy, c-format
-msgid "Invalid default value: %d"
-msgstr "無效的預設值：%d"
+msgid " -f, --first-only print the first found filesystem only\n"
+msgstr " l 列出已知檔案系統類型"
-#: sys-utils/cytune.c:354
+#: misc-utils/findmnt.c:1351
#, fuzzy
-msgid "Invalid set time value"
-msgstr "無效的設定時間值"
-
-#: sys-utils/cytune.c:356
-#, fuzzy, c-format
-msgid "Invalid set time value: %d"
-msgstr "無效的設定時間值：%d"
+msgid " -i, --invert invert the sense of matching\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/cytune.c:364
+#: misc-utils/findmnt.c:1352 misc-utils/lslocks.c:552 sys-utils/lsns.c:1291
+#: sys-utils/rfkill.c:639
#, fuzzy
-msgid "Invalid default time value"
-msgstr "無效的預設時間值"
-
-#: sys-utils/cytune.c:366
-#, fuzzy, c-format
-msgid "Invalid default time value: %d"
-msgstr "無效的預設時間值：%d"
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/cytune.c:409
-#, fuzzy, c-format
-msgid "cannot set %s to threshold %d"
-msgstr "無法設定 %s 到臨界值 %d"
+#: misc-utils/findmnt.c:1353 sys-utils/lsns.c:1292
+#, fuzzy
+msgid " -l, --list use list format output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/cytune.c:423
-#, fuzzy, c-format
-msgid "cannot set %s to time threshold %d"
-msgstr "無法設定 %s 到時間臨界值 %d"
+#: misc-utils/findmnt.c:1354
+msgid " -N, --task <tid> use alternative namespace (/proc/<tid>/mountinfo file)\n"
+msgstr ""
-#: sys-utils/cytune.c:447
-#, c-format
-msgid "%s: %ld current threshold and %ld current timeout\n"
-msgstr "%s：%ld 為目前臨界值以及 %ld 為目前逾時值\n"
+#: misc-utils/findmnt.c:1355
+#, fuzzy
+msgid " -n, --noheadings don't print column headings\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/cytune.c:450
-#, c-format
-msgid "%s: %ld default threshold and %ld default timeout\n"
-msgstr "%s：%ld 為預設臨界值以及 %ld 為預設逾時值\n"
+#: misc-utils/findmnt.c:1356
+msgid " -O, --options <list> limit the set of filesystems by mount options\n"
+msgstr ""
-#: sys-utils/dmesg.c:86
+#: misc-utils/findmnt.c:1357
#, fuzzy
-msgid "system is unusable"
-msgstr "系統是無法使用"
+msgid " -o, --output <list> the output columns to be shown\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/dmesg.c:87
+#: misc-utils/findmnt.c:1358
#, fuzzy
-msgid "action must be taken immediately"
-msgstr "動作必須被佔用即時"
+msgid " --output-all output all available columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/dmesg.c:88
+#: misc-utils/findmnt.c:1359
#, fuzzy
-msgid "critical conditions"
-msgstr "重要條件"
+msgid " -P, --pairs use key=\"value\" output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/dmesg.c:89
+#: misc-utils/findmnt.c:1360
#, fuzzy
-msgid "error conditions"
-msgstr "條件時發生錯誤"
+msgid " --pseudo print only pseudo-filesystems\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/dmesg.c:90
+#: misc-utils/findmnt.c:1361
#, fuzzy
-msgid "warning conditions"
-msgstr "警告條件"
+msgid " --shadowed print only filesystems over-mounted by another filesystem\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/dmesg.c:91
+#: misc-utils/findmnt.c:1362
#, fuzzy
-msgid "normal but significant condition"
-msgstr "一般但是顯著的條件"
+msgid " -R, --submounts print all submounts for the matching filesystems\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/dmesg.c:92
+#: misc-utils/findmnt.c:1363
#, fuzzy
-msgid "informational"
-msgstr "參考性"
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/dmesg.c:93
+#: misc-utils/findmnt.c:1364
#, fuzzy
-msgid "debug-level messages"
-msgstr "debug-level 訊息"
+msgid " --real print only real filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#: sys-utils/dmesg.c:107
-#, fuzzy
-msgid "kernel messages"
-msgstr "內核訊息"
+#: misc-utils/findmnt.c:1365
+msgid ""
+" -S, --source <string> the device to mount (by name, maj:min, \n"
+" LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
+msgstr ""
-#: sys-utils/dmesg.c:108
+#: misc-utils/findmnt.c:1367
#, fuzzy
-msgid "random user-level messages"
-msgstr "隨機使用者級訊息"
+msgid " -T, --target <path> the path to the filesystem to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/dmesg.c:109
+#: misc-utils/findmnt.c:1368
#, fuzzy
-msgid "mail system"
-msgstr "郵件系統"
+msgid " --tree enable tree format output if possible\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/dmesg.c:110
+#: misc-utils/findmnt.c:1369
#, fuzzy
-msgid "system daemons"
-msgstr "系統守護程式"
+msgid " -M, --mountpoint <dir> the mountpoint directory\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
-#: sys-utils/dmesg.c:111
+#: misc-utils/findmnt.c:1370
#, fuzzy
-msgid "security/authorization messages"
-msgstr "安全/授權訊息"
+msgid " -t, --types <list> limit the set of filesystems by FS types\n"
+msgstr " l 列出已知檔案系統類型"
-#: sys-utils/dmesg.c:112
+#: misc-utils/findmnt.c:1371
#, fuzzy
-msgid "messages generated internally by syslogd"
-msgstr "訊息產生的內部由 syslogd"
+msgid " -U, --uniq ignore filesystems with duplicate target\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/dmesg.c:113
+#: misc-utils/findmnt.c:1372 misc-utils/lslocks.c:559 sys-utils/lsns.c:1299
#, fuzzy
-msgid "line printer subsystem"
-msgstr "列印表機子系統"
+msgid " -u, --notruncate don't truncate text in columns\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/dmesg.c:114
+#: misc-utils/findmnt.c:1373
#, fuzzy
-msgid "network news subsystem"
-msgstr "網路新聞子系統"
+msgid " -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/dmesg.c:115
-#, fuzzy
-msgid "UUCP subsystem"
-msgstr "UUCP 子系統"
+#: misc-utils/findmnt.c:1374
+msgid " -y, --shell use column names to be usable as shell variable identifiers\n"
+msgstr ""
-#: sys-utils/dmesg.c:116
+#: misc-utils/findmnt.c:1377
#, fuzzy
-msgid "clock daemon"
-msgstr "時鐘守護程式"
+msgid " -x, --verify verify mount table content (default is fstab)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/dmesg.c:117
+#: misc-utils/findmnt.c:1378
#, fuzzy
-msgid "security/authorization messages (private)"
-msgstr "安全/授權訊息 (私人的)"
+msgid " --verbose print more details\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/dmesg.c:118
+#: misc-utils/findmnt.c:1379
#, fuzzy
-msgid "ftp daemon"
-msgstr "檔案傳輸通訊協定守護程式"
+msgid " --vfs-all print all VFS options\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/dmesg.c:238
-#, fuzzy
-msgid " -C, --clear clear the kernel ring buffer\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#: misc-utils/findmnt.c:1519
+#, c-format
+msgid "unknown direction '%s'"
+msgstr "不明方向「%s」"
-#: sys-utils/dmesg.c:239
+#: misc-utils/findmnt.c:1596
#, fuzzy
-msgid " -c, --read-clear read and clear all messages\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+msgid "invalid TID argument"
+msgstr "無效的 TID 引數"
-#: sys-utils/dmesg.c:240
+#: misc-utils/findmnt.c:1683
#, fuzzy
-msgid " -D, --console-off disable printing messages to console\n"
-msgstr " -s 列印訊息到標準輸出\n"
+msgid "--poll accepts only one file, but more specified by --tab-file"
+msgstr "--poll 接受只有一個檔案，但是更多指定的由 --tab-file"
-#: sys-utils/dmesg.c:241
-#, fuzzy
-msgid " -E, --console-on enable printing messages to console\n"
-msgstr " -s 列印訊息到標準輸出\n"
+#: misc-utils/findmnt.c:1687
+msgid "options --target and --source can't be used together with command line element that is not an option"
+msgstr "選項 --target 和 --source 無法與不是選項的命令列元素一起使用"
-#: sys-utils/dmesg.c:242
-msgid ""
-" -F, --file <file> use the file instead of the kernel log buffer\n"
-msgstr ""
+#: misc-utils/findmnt.c:1740 sys-utils/fstrim.c:308
+msgid "failed to initialize libmount cache"
+msgstr "初始化 libmount 快取時失敗"
-#: sys-utils/dmesg.c:243
-msgid " -f, --facility <list> restrict output to defined facilities\n"
-msgstr ""
+#: misc-utils/findmnt.c:1785
+#, fuzzy, c-format
+msgid "%s column is requested, but --poll is not enabled"
+msgstr "%s 欄被要求的，但是 --poll 未被已啟用"
-#: sys-utils/dmesg.c:244
+#: misc-utils/findmnt-verify.c:125
#, fuzzy
-msgid " -H, --human human readable output\n"
-msgstr " -u, --unquote 不引言輸出\n"
+msgid "target specified more than once"
+msgstr "您指定了比磁碟上還多的磁柱數"
-#: sys-utils/dmesg.c:245
-#, fuzzy
-msgid " -k, --kernel display kernel messages\n"
-msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+#: misc-utils/findmnt-verify.c:127
+#, c-format
+msgid "wrong order: %s specified before %s"
+msgstr ""
-#: sys-utils/dmesg.c:246
-#, fuzzy
-msgid ""
-" -L, --color[=<when>] colorize messages (auto, always or never)\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#: misc-utils/findmnt-verify.c:141
+msgid "undefined target (fs_file)"
+msgstr ""
-#: sys-utils/dmesg.c:247
-msgid " -l, --level <list> restrict output to defined levels\n"
+#: misc-utils/findmnt-verify.c:148
+#, c-format
+msgid "non-canonical target path (real: %s)"
msgstr ""
-#: sys-utils/dmesg.c:248
-msgid " -n, --console-level <level> set level of messages printed to console\n"
+#: misc-utils/findmnt-verify.c:153
+#, c-format
+msgid "unreachable on boot required target: %m"
msgstr ""
-#: sys-utils/dmesg.c:249
-#, fuzzy
-msgid " -P, --nopager do not pipe output into a pager\n"
-msgstr " -u, --unquote 不引言輸出\n"
+#: misc-utils/findmnt-verify.c:155
+#, fuzzy, c-format
+msgid "unreachable target: %m"
+msgstr "無法讀取 %s"
-#: sys-utils/dmesg.c:250
+#: misc-utils/findmnt-verify.c:159
#, fuzzy
-msgid " -r, --raw print the raw message buffer\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid "target is not a directory"
+msgstr "%s：並非目錄"
-#: sys-utils/dmesg.c:251
-#, fuzzy
-msgid ""
-" -S, --syslog force to use syslog(2) rather than /dev/kmsg\n"
-msgstr " -s, --status 查詢印表機狀態\n"
+#: misc-utils/findmnt-verify.c:161
+msgid "target exists"
+msgstr ""
-#: sys-utils/dmesg.c:252
-msgid ""
-" -s, --buffer-size <size> buffer size to query the kernel ring buffer\n"
+#: misc-utils/findmnt-verify.c:176
+#, c-format
+msgid "unreachable on boot required source: %s=%s"
msgstr ""
-#: sys-utils/dmesg.c:253
-#, fuzzy
-msgid " -u, --userspace display userspace messages\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#: misc-utils/findmnt-verify.c:178
+#, fuzzy, c-format
+msgid "unreachable: %s=%s"
+msgstr "讀取失敗：%s"
-#: sys-utils/dmesg.c:254
-#, fuzzy
-msgid " -w, --follow wait for new messages\n"
-msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+#: misc-utils/findmnt-verify.c:180
+#, fuzzy, c-format
+msgid "%s=%s translated to %s"
+msgstr "%s 被關聯的與 %s\n"
-#: sys-utils/dmesg.c:255
-msgid ""
-" -x, --decode decode facility and level to readable string\n"
+#: misc-utils/findmnt-verify.c:201
+msgid "undefined source (fs_spec)"
msgstr ""
-#: sys-utils/dmesg.c:256
-#, fuzzy
-msgid " -d, --show-delta show time delta between printed messages\n"
-msgstr " -s, --status 查詢印表機狀態\n"
+#: misc-utils/findmnt-verify.c:210
+#, fuzzy, c-format
+msgid "unsupported source tag: %s"
+msgstr "不受支援的引數：%s"
-#: sys-utils/dmesg.c:257
-msgid ""
-" -e, --reltime show local time and time delta in readable "
-"format\n"
+#: misc-utils/findmnt-verify.c:217
+#, c-format
+msgid "do not check %s source (pseudo/net)"
msgstr ""
-#: sys-utils/dmesg.c:258
-#, fuzzy
-msgid " -T, --ctime show human readable timestamp\n"
-msgstr " -u, --unquote 不引言輸出\n"
-
-#: sys-utils/dmesg.c:259
-#, fuzzy
-msgid " -t, --notime don't print messages timestamp\n"
-msgstr " -u, --unquote 不引言輸出\n"
+#: misc-utils/findmnt-verify.c:220
+#, fuzzy, c-format
+msgid "unreachable source: %s: %m"
+msgstr "無法開啟「%s」：%s"
-#: sys-utils/dmesg.c:260
-msgid ""
-" --time-format <format> show time stamp using format:\n"
-" [delta|reltime|ctime|notime|iso]\n"
-"Suspending/resume will make ctime and iso timestamps inaccurate.\n"
+#: misc-utils/findmnt-verify.c:223
+#, c-format
+msgid "non-bind mount source %s is a directory or regular file"
msgstr ""
-#: sys-utils/dmesg.c:266
-#, fuzzy
-msgid ""
-"\n"
-"Supported log facilities:\n"
-msgstr ""
-"\n"
-"支援的記錄檔機能：\n"
+#: misc-utils/findmnt-verify.c:226
+#, fuzzy, c-format
+msgid "source %s is not a block device"
+msgstr " %s 並非區塊裝置"
-#: sys-utils/dmesg.c:272
-#, fuzzy
-msgid ""
-"\n"
-"Supported log levels (priorities):\n"
-msgstr ""
-"\n"
-"支援的記錄檔等級 (優先等級)：\n"
+#: misc-utils/findmnt-verify.c:228
+#, fuzzy, c-format
+msgid "source %s exists"
+msgstr "來源裝置"
-#: sys-utils/dmesg.c:326
+#: misc-utils/findmnt-verify.c:241
#, fuzzy, c-format
-msgid "failed to parse level '%s'"
-msgstr "剖析等級『%s 時失敗』"
+msgid "VFS options: %s"
+msgstr "%s：選項 "
-#: sys-utils/dmesg.c:328
+#: misc-utils/findmnt-verify.c:245
#, fuzzy, c-format
-msgid "unknown level '%s'"
-msgstr "不明等級『%s』"
+msgid "FS options: %s"
+msgstr "%s：選項 "
-#: sys-utils/dmesg.c:364
+#: misc-utils/findmnt-verify.c:249
#, fuzzy, c-format
-msgid "failed to parse facility '%s'"
-msgstr "剖析機能『%s 時失敗』"
+msgid "userspace options: %s"
+msgstr "資源選項：\n"
-#: sys-utils/dmesg.c:366
+#: misc-utils/findmnt-verify.c:263
#, fuzzy, c-format
-msgid "unknown facility '%s'"
-msgstr "不明機能『%s』"
+msgid "unsupported swaparea discard policy: %s"
+msgstr "不受支援的引數：%s"
-#: sys-utils/dmesg.c:495
+#: misc-utils/findmnt-verify.c:271
#, fuzzy
-msgid "sysinfo failed"
-msgstr "sysinfo 失敗"
+msgid "failed to parse swaparea priority option"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/dmesg.c:521
-#, fuzzy, c-format
-msgid "cannot mmap: %s"
-msgstr "無法 mmap：%s"
+#: misc-utils/findmnt-verify.c:421
+#, c-format
+msgid "do not check %s FS type (pseudo/net)"
+msgstr ""
-#: sys-utils/dmesg.c:1311
-#, fuzzy
-msgid "invalid buffer size argument"
-msgstr "無效的緩衝區大小引數"
+#: misc-utils/findmnt-verify.c:433
+msgid "\"none\" FS type is recommended for bind or move oprations only"
+msgstr ""
-#: sys-utils/dmesg.c:1368
-#, fuzzy
-msgid "--show-delta is ignored when used together with iso8601 time format"
-msgstr "--reltime 無法使用的一起與 --ctime "
+#: misc-utils/findmnt-verify.c:445
+#, fuzzy, c-format
+msgid "%s seems unsupported by the current kernel"
+msgstr "唯讀光碟機選取速度命令不支援由這個內核"
-#: sys-utils/dmesg.c:1377
+#: misc-utils/findmnt-verify.c:452
#, fuzzy
-msgid ""
-"--raw can't be used together with level, facility, decode, delta, ctime or "
-"notime options"
-msgstr "--raw 無法使用的一起與等級、機能、解碼、delta，ctime 或 notime 選項"
+#| msgid "Unknown"
+msgid "reason unknown"
+msgstr "未知"
-#: sys-utils/dmesg.c:1400
-#, fuzzy
-msgid "read kernel buffer failed"
-msgstr "讀取內核緩衝區失敗"
+#: misc-utils/findmnt-verify.c:455 misc-utils/findmnt-verify.c:457
+#, fuzzy, c-format
+msgid "cannot detect on-disk filesystem type (%s)"
+msgstr "不明檔案系統型態『%s』"
-#: sys-utils/dmesg.c:1413
-#, fuzzy
-msgid "unsupported command"
-msgstr "不受支援的命令"
+#: misc-utils/findmnt-verify.c:467
+#, c-format
+msgid "%s does not match with on-disk %s"
+msgstr ""
-#: sys-utils/dmesg.c:1419
-#, fuzzy
-msgid "klogctl failed"
-msgstr "klogctl 失敗"
+#: misc-utils/findmnt-verify.c:471
+#, fuzzy, c-format
+msgid "on-disk %s seems unsupported by the current kernel"
+msgstr "唯讀光碟機選取速度命令不支援由這個內核"
-#: sys-utils/eject.c:142
+#: misc-utils/findmnt-verify.c:475
#, fuzzy, c-format
-msgid " %s [options] [<device>|<mountpoint>]\n"
-msgstr " %s [選項] [<device>|<mountpoint>]\n"
+msgid "FS type is %s"
+msgstr "類型：%s\n"
-#: sys-utils/eject.c:145
-#, fuzzy
-msgid ""
-" -a, --auto <on|off> turn auto-eject feature on or off\n"
-" -c, --changerslot <slot> switch discs on a CD-ROM changer\n"
-" -d, --default display default device\n"
-" -f, --floppy eject floppy\n"
-" -F, --force don't care about device type\n"
-" -i, --manualeject <on|off> toggle manual eject protection on/off\n"
-" -m, --no-unmount do not unmount device even if it is mounted\n"
-" -M, --no-partitions-unmount do not unmount another partitions\n"
-" -n, --noop don't eject, just show device found\n"
-" -p, --proc use /proc/mounts instead of /etc/mtab\n"
-" -q, --tape eject tape\n"
-" -r, --cdrom eject CD-ROM\n"
-" -s, --scsi eject SCSI device\n"
-" -t, --trayclose close tray\n"
-" -T, --traytoggle toggle tray\n"
-" -v, --verbose enable verbose output\n"
-" -x, --cdspeed <speed> set CD-ROM max speed\n"
-" -X, --listspeed list CD-ROM available speeds\n"
+#: misc-utils/findmnt-verify.c:492
+#, c-format
+msgid "recommended root FS passno is 1 (current is %d)"
msgstr ""
-" -a, --auto <on|off> 輪值 auto-eject 特徵開或關\n"
-" -c, --changerslot<插槽> 切換碟片於唯讀光碟機 changer\n"
-" -d, --default 顯示預設裝置\n"
-" -f, --floppy 退出軟碟\n"
-" -F, --force 不要去管裝置類型\n"
-" -i, --manualeject<於|關閉> 切換手動退出保護開/關\n"
-" -m, --no-unmount 不卸載裝置即使它被掛載\n"
-" -M, --no-partitions-unmount 不卸載另外的分割區\n"
-" -n, --noop 不退出，僅顯示裝置找到\n"
-" -p, --proc 使用/proc/掛載以代替/etc/mtab\n"
-" -q, --tape 退出磁帶\n"
-" -r, --cdrom 退出唯讀光碟機\n"
-" -s, --scsi 退出 SCSI 裝置\n"
-" -t, --trayclose 關閉托盤\n"
-" -T, --traytoggle 切換托盤\n"
-" -v, --verbose 啟用詳細的輸出\n"
-" -x, --cdspeed<速度> 設定唯讀光碟機最大速度\n"
-" -X, --listspeed 清單唯讀光碟機可用速度\n"
-#: sys-utils/eject.c:169
-#, fuzzy
+#: misc-utils/findmnt-verify.c:563
msgid ""
-"\n"
-"By default tries -r, -s, -f, and -q in order until success.\n"
+"your fstab has been modified, but systemd still uses the old version;\n"
+" use 'systemctl daemon-reload' to reload"
msgstr ""
-"\n"
-"按照預設嘗試 -r, -s, -f, 和 -q 在中排序直到成功。\n"
-
-#: sys-utils/eject.c:215
-#, fuzzy
-msgid "invalid argument to --auto/-a option"
-msgstr "無效的引數到 --auto /-a 選項"
-#: sys-utils/eject.c:219
-#, fuzzy
-msgid "invalid argument to --changerslot/-c option"
-msgstr "無效的引數到 --changerslot /-c 選項"
+#: misc-utils/findmnt-verify.c:574
+#, fuzzy, c-format
+msgid "%d parse error"
+msgid_plural "%d parse errors"
+msgstr[0] "剖析錯誤\n"
-#: sys-utils/eject.c:223
-#, fuzzy
-msgid "invalid argument to --cdspeed/-x option"
-msgstr "無效的引數到 --cdspeed /-x 選項"
+#: misc-utils/findmnt-verify.c:575
+#, fuzzy, c-format
+msgid ", %d error"
+msgid_plural ", %d errors"
+msgstr[0] "，錯誤"
-#: sys-utils/eject.c:244
-#, fuzzy
-msgid "invalid argument to --manualeject/-i option"
-msgstr "無效的引數到 --manualeject /-i 選項"
+#: misc-utils/findmnt-verify.c:576
+#, c-format
+msgid ", %d warning"
+msgid_plural ", %d warnings"
+msgstr[0] ""
-#: sys-utils/eject.c:339
-#, fuzzy
-msgid "CD-ROM auto-eject command failed"
-msgstr "唯讀光碟機 auto-eject 命令失敗"
+#: misc-utils/findmnt-verify.c:579
+#, c-format
+msgid "Success, no errors or warnings detected\n"
+msgstr ""
-#: sys-utils/eject.c:356
-#, fuzzy
-msgid "CD-ROM lock door command failed"
-msgstr "唯讀光碟機鎖定匣門命令失敗"
+#: misc-utils/getopt.c:315
+msgid "empty long option after -l or --long argument"
+msgstr "-l 或 --long 引數之後出現空的長選項"
-#: sys-utils/eject.c:359
-#, fuzzy
-msgid "CD-Drive may NOT be ejected with device button"
-msgstr "CD-Drive 可能無法被退出與裝置按鈕"
+#: misc-utils/getopt.c:336
+msgid "unknown shell after -s or --shell argument"
+msgstr "-s 或 --shell 引數之後出現不明的命令殼名稱"
-#: sys-utils/eject.c:361
-#, fuzzy
-msgid "CD-Drive may be ejected with device button"
-msgstr "CD-Drive 也許會被退出與裝置按鈕"
+#: misc-utils/getopt.c:343
+#, fuzzy, c-format
+msgid ""
+" %1$s <optstring> <parameters>\n"
+" %1$s [options] [--] <optstring> <parameters>\n"
+" %1$s [options] -o|--options <optstring> [options] [--] <parameters>\n"
+msgstr ""
+" %1$s optstring 參數\n"
+" %1$s [選項] [--] optstring 參數\n"
+" %1$s [選項] -o|--options optstring [選項] [--] 參數\n"
-#: sys-utils/eject.c:372
+#: misc-utils/getopt.c:349
#, fuzzy
-msgid "CD-ROM select disc command failed"
-msgstr "唯讀光碟機選取碟片命令失敗"
+msgid "Parse command options.\n"
+msgstr "所有掛載選項"
-#: sys-utils/eject.c:376
+#: misc-utils/getopt.c:352
#, fuzzy
-msgid "CD-ROM load from slot command failed"
-msgstr "唯讀光碟機載入從插槽命令失敗"
+msgid " -a, --alternative allow long options starting with single -\n"
+msgstr " -a, --alternative 允許長選項開始與單一 -\n"
-#: sys-utils/eject.c:378
+#: misc-utils/getopt.c:353
#, fuzzy
-msgid "IDE/ATAPI CD-ROM changer not supported by this kernel\n"
-msgstr "整合開發環境/ATAPI 唯讀光碟機 changer 不支援由這個內核\n"
+msgid " -l, --longoptions <longopts> the long options to be recognized\n"
+msgstr " -l, --longoptions <longopts> 長選項為辨識的\n"
-#: sys-utils/eject.c:396
+#: misc-utils/getopt.c:354
#, fuzzy
-msgid "CD-ROM tray close command failed"
-msgstr "唯讀光碟機托盤關閉命令失敗"
+msgid " -n, --name <progname> the name under which errors are reported\n"
+msgstr " -n, --name <progname> 名稱之下該項錯誤被報告\n"
-#: sys-utils/eject.c:398
+#: misc-utils/getopt.c:355
#, fuzzy
-msgid "CD-ROM tray close command not supported by this kernel\n"
-msgstr "唯讀光碟機托盤關閉命令不支援由這個內核\n"
+msgid " -o, --options <optstring> the short options to be recognized\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/eject.c:415
+#: misc-utils/getopt.c:356
#, fuzzy
-msgid "CD-ROM eject unsupported"
-msgstr "唯讀光碟機退出不受支援的"
+msgid " -q, --quiet disable error reporting by getopt(3)\n"
+msgstr " -q, --quiet 停用錯誤報告由 getopt (3)\n"
-#: sys-utils/eject.c:446 sys-utils/eject.c:467 sys-utils/eject.c:1119
+#: misc-utils/getopt.c:357
#, fuzzy
-msgid "CD-ROM eject command failed"
-msgstr "唯讀光碟機退出命令失敗"
+msgid " -Q, --quiet-output no normal output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/eject.c:449
+#: misc-utils/getopt.c:358
#, fuzzy
-msgid "no CD-ROM information available"
-msgstr "沒有唯讀光碟機資訊可用"
+msgid " -s, --shell <shell> set quoting conventions to those of <shell>\n"
+msgstr " -s, --shell <shell> 設定命令殼引言慣例\n"
-#: sys-utils/eject.c:452
+#: misc-utils/getopt.c:359
#, fuzzy
-msgid "CD-ROM drive is not ready"
-msgstr "光碟機不是就緒"
+msgid " -T, --test test for getopt(1) version\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
-#: sys-utils/eject.c:492
+#: misc-utils/getopt.c:360
#, fuzzy
-msgid "CD-ROM select speed command failed"
-msgstr "唯讀光碟機選取速度命令失敗"
+msgid " -u, --unquoted do not quote the output\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/eject.c:494 sys-utils/eject.c:580
-#, fuzzy
-msgid "CD-ROM select speed command not supported by this kernel"
-msgstr "唯讀光碟機選取速度命令不支援由這個內核"
+#: misc-utils/getopt.c:409 misc-utils/getopt.c:468
+msgid "missing optstring argument"
+msgstr "缺少選項字串引數"
-#: sys-utils/eject.c:531
-#, fuzzy, c-format
-msgid "%s: failed to finding CD-ROM name"
-msgstr "%s：無法尋找唯讀光碟機名稱"
+#: misc-utils/getopt.c:463
+msgid "internal error, contact the author."
+msgstr "內部錯誤，請與作者連絡。"
-#: sys-utils/eject.c:546
+#: misc-utils/hardlink.c:272
#, fuzzy, c-format
-msgid "%s: failed to read speed"
-msgstr "%s：無法讀取速度"
+msgid "could not compile regular expression %s: %s"
+msgstr "沒有前一個正規表示式"
-#: sys-utils/eject.c:554
+#: misc-utils/hardlink.c:391
#, fuzzy
-msgid "failed to read speed"
-msgstr "讀取速度時失敗"
+msgid "Mode:"
+msgstr "型號："
-#: sys-utils/eject.c:598
-#, fuzzy
-msgid "not an sg device, or old sg driver"
-msgstr "不是 sg 裝置，或舊的 sg 驅動程式"
+#: misc-utils/hardlink.c:392
+msgid "dry-run"
+msgstr ""
-#: sys-utils/eject.c:670
-#, fuzzy, c-format
-msgid "%s: unmounting"
-msgstr "%s：卸載"
+#: misc-utils/hardlink.c:392
+msgid "real"
+msgstr ""
-#: sys-utils/eject.c:685
-#, fuzzy, c-format
-msgid "unable to exec /bin/umount of `%s'"
-msgstr "無法 exec/bin/umount 的『%s』"
+#: misc-utils/hardlink.c:393
+msgid "Method:"
+msgstr ""
-#: sys-utils/eject.c:688
+#: misc-utils/hardlink.c:394
#, fuzzy
-msgid "unable to fork"
-msgstr "無法衍生"
+msgid "Files:"
+msgstr "檔案 %s"
-#: sys-utils/eject.c:695
-#, fuzzy, c-format
-msgid "unmount of `%s' did not exit normally"
-msgstr "卸載的『%s』並未正常離開"
+#: misc-utils/hardlink.c:395 misc-utils/hardlink.c:401
+#: misc-utils/hardlink.c:405
+#, c-format
+msgid "%-25s %zu files"
+msgstr ""
-#: sys-utils/eject.c:698
-#, fuzzy, c-format
-msgid "unmount of `%s' failed\n"
-msgstr "卸載的『%s』失敗\n"
+#: misc-utils/hardlink.c:395
+msgid "Linked:"
+msgstr ""
-#: sys-utils/eject.c:742
-#, fuzzy
-msgid "failed to parse mount table"
-msgstr "剖析掛載表時失敗"
+#: misc-utils/hardlink.c:398
+#, c-format
+msgid "%-25s %zu xattrs"
+msgstr ""
-#: sys-utils/eject.c:803 sys-utils/eject.c:1000
-#, fuzzy, c-format
-msgid "%s: mounted on %s"
-msgstr "%s：掛載的於 %s"
+#: misc-utils/hardlink.c:398 misc-utils/hardlink.c:401
+msgid "Compared:"
+msgstr ""
-#: sys-utils/eject.c:900
-#, fuzzy, c-format
-msgid "%s: is removable device"
-msgstr "%s：是可移除的裝置"
+#: misc-utils/hardlink.c:405
+msgid "Skipped reflinks:"
+msgstr ""
-#: sys-utils/eject.c:919
+#: misc-utils/hardlink.c:412
+#, fuzzy
+msgid "Saved:"
+msgstr "已儲存"
+
+#: misc-utils/hardlink.c:415
#, fuzzy, c-format
-msgid "%s: connected by hotplug subsystem: %s"
-msgstr "%s：連線由 hotplug 子系統：%s"
+msgid "%-25s %<PRId64>.%06<PRId64> seconds"
+msgstr "%-15s%2i 秒\n"
-#: sys-utils/eject.c:940
+#: misc-utils/hardlink.c:415
#, fuzzy
-msgid "setting CD-ROM speed to auto"
-msgstr "設定唯讀光碟機速度到自動"
+msgid "Duration:"
+msgstr "旗標描述"
-#: sys-utils/eject.c:942
+#: misc-utils/hardlink.c:453
#, fuzzy, c-format
-msgid "setting CD-ROM speed to %ldX"
-msgstr "設定唯讀光碟機速度到 %ldX"
+msgid "cannot get xattr names for %s"
+msgstr "無法提取臨界值用於 %s"
-#: sys-utils/eject.c:969
+#: misc-utils/hardlink.c:469
#, fuzzy, c-format
-msgid "default device: `%s'"
-msgstr "預設裝置：『%s』"
+msgid "cannot get xattr value of %s for %s"
+msgstr "無法提取臨界值用於 %s"
-#: sys-utils/eject.c:975
-#, fuzzy, c-format
-msgid "using default device `%s'"
-msgstr "使用預設裝置『%s』"
+#: misc-utils/hardlink.c:549
+#, c-format
+msgid "Comparing xattrs of %s to %s"
+msgstr ""
-#: sys-utils/eject.c:994
-#, fuzzy, c-format
-msgid "%s: unable to find device"
-msgstr "%s：無法找到裝置"
+#: misc-utils/hardlink.c:716
+msgid "Reflinking failed, fallback to hardlinking"
+msgstr ""
-#: sys-utils/eject.c:996
+#: misc-utils/hardlink.c:751
#, fuzzy, c-format
-msgid "device name is `%s'"
-msgstr "裝置名稱是『%s』"
+msgid "%s%sLinking %s to %s (-%s)"
+msgstr "%s：建立連結到 %s 失敗"
-#: sys-utils/eject.c:1002 sys-utils/umount.c:204 sys-utils/umount.c:233
-#: sys-utils/umount.c:405 sys-utils/umount.c:428
-#, fuzzy, c-format
-msgid "%s: not mounted"
-msgstr "%s：無法掛載"
+#: misc-utils/hardlink.c:752
+msgid "[DryRun] "
+msgstr ""
-#: sys-utils/eject.c:1006
+#: misc-utils/hardlink.c:766
#, fuzzy, c-format
-msgid "%s: disc device: %s (disk device will be used for eject)"
-msgstr "%s：碟片裝置：%s (磁碟裝置將被用於退出)"
+msgid "cannot link %s to %s"
+msgstr "無法開啟 %s：%s"
-#: sys-utils/eject.c:1014
+#: misc-utils/hardlink.c:769
#, fuzzy, c-format
-msgid "%s: not found mountpoint or device with the given name"
-msgstr "%s：找不到 mountpoint 或裝置與給定的名稱"
+msgid "cannot rename %s to %s"
+msgstr "無法重新命名 %s 為 %s: %s\n"
-#: sys-utils/eject.c:1017
-#, fuzzy, c-format
-msgid "%s: is whole-disk device"
-msgstr "%s：是 whole-disk 裝置"
+#: misc-utils/hardlink.c:855
+#, c-format
+msgid "Skipped %s (smaller than configured size)"
+msgstr ""
-#: sys-utils/eject.c:1021
+#: misc-utils/hardlink.c:865
#, fuzzy, c-format
-msgid "%s: is not hot-pluggable device"
-msgstr "%s：不是可熱插式的裝置"
+msgid "Skipped %s (greater than configured size)"
+msgstr "無法提取裝置大小"
-#: sys-utils/eject.c:1025
+#: misc-utils/hardlink.c:893
#, fuzzy, c-format
-msgid "device is `%s'"
-msgstr "裝置是『%s』"
+msgid "Skipped %s (specified more than once)"
+msgstr "您指定了比磁碟上還多的磁柱數"
-#: sys-utils/eject.c:1026
+#: misc-utils/hardlink.c:932
#, fuzzy
-msgid "exiting due to -n/--noop option"
-msgstr "離開由於 -n/--noop 選項"
-
-#: sys-utils/eject.c:1040
-#, fuzzy, c-format
-msgid "%s: enabling auto-eject mode"
-msgstr "%s：啟用 auto-eject 模式"
-
-#: sys-utils/eject.c:1042
-#, fuzzy, c-format
-msgid "%s: disabling auto-eject mode"
-msgstr "%s：停用 auto-eject 模式"
-
-#: sys-utils/eject.c:1050
-#, fuzzy, c-format
-msgid "%s: closing tray"
-msgstr "%s：關閉托盤"
+msgid "cannot continue"
+msgstr "無法守護程式化"
-#: sys-utils/eject.c:1059
+#: misc-utils/hardlink.c:1100
#, fuzzy, c-format
-msgid "%s: toggling tray"
-msgstr "%s：切換托盤"
+msgid "Skipped (attributes mismatch) %s"
+msgstr "不受支援的引數：%s"
-#: sys-utils/eject.c:1068
-#, fuzzy, c-format
-msgid "%s: listing CD-ROM speed"
-msgstr "%s：列表唯讀光碟機速度"
+#: misc-utils/hardlink.c:1106
+#, c-format
+msgid "Skipped (already reflink) %s"
+msgstr ""
-#: sys-utils/eject.c:1094
-#, fuzzy, c-format
-msgid "error: %s: device in use"
-msgstr "錯誤：%s：裝置在中使用"
+#: misc-utils/hardlink.c:1127
+#, c-format
+msgid "Skipped (content mismatch) %s"
+msgstr ""
-#: sys-utils/eject.c:1100
+#: misc-utils/hardlink.c:1157
#, fuzzy, c-format
-msgid "%s: selecting CD-ROM disc #%ld"
-msgstr "%s：選取唯讀光碟機碟片 #%ld"
+msgid " %s [options] <directory>|<file> ...\n"
+msgstr " %s [選項] [<file>]\n"
-#: sys-utils/eject.c:1116
-#, fuzzy, c-format
-msgid "%s: trying to eject using CD-ROM eject command"
-msgstr "%s：嘗試退出使用唯讀光碟機退出命令"
+#: misc-utils/hardlink.c:1161
+msgid "Consolidate duplicate files using hardlinks.\n"
+msgstr ""
-#: sys-utils/eject.c:1118
+#: misc-utils/hardlink.c:1164
#, fuzzy
-msgid "CD-ROM eject command succeeded"
-msgstr "唯讀光碟機退出命令成功"
-
-#: sys-utils/eject.c:1123
-#, fuzzy, c-format
-msgid "%s: trying to eject using SCSI commands"
-msgstr "%s：嘗試退出使用 SCSI 命令"
+msgid " -c, --content compare only file contents, same as -pot\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/eject.c:1125
+#: misc-utils/hardlink.c:1165
#, fuzzy
-msgid "SCSI eject succeeded"
-msgstr "SCSI 退出成功"
+msgid ""
+" -b, --io-size <size> I/O buffer size for file reading\n"
+" (speedup, using more RAM)\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/eject.c:1126
+#: misc-utils/hardlink.c:1167
#, fuzzy
-msgid "SCSI eject failed"
-msgstr "SCSI 退出失敗"
+msgid " -d, --respect-dir directory names have to be identical\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/eject.c:1130
-#, fuzzy, c-format
-msgid "%s: trying to eject using floppy eject command"
-msgstr "%s：嘗試退出使用軟碟退出命令"
+#: misc-utils/hardlink.c:1168
+msgid " -f, --respect-name filenames have to be identical\n"
+msgstr ""
-#: sys-utils/eject.c:1132
-#, fuzzy
-msgid "floppy eject command succeeded"
-msgstr "軟碟退出命令成功"
+#: misc-utils/hardlink.c:1169
+msgid " -i, --include <regex> regular expression to include files/dirs\n"
+msgstr ""
-#: sys-utils/eject.c:1133
+#: misc-utils/hardlink.c:1170
#, fuzzy
-msgid "floppy eject command failed"
-msgstr "軟碟退出命令失敗"
-
-#: sys-utils/eject.c:1137
-#, fuzzy, c-format
-msgid "%s: trying to eject using tape offline command"
-msgstr "%s：嘗試退出使用磁帶離線命令"
+msgid ""
+" -m, --maximize maximize the hardlink count, remove the file with\n"
+" lowest hardlink count\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -s, --fstab 搜尋在中靜態表格的檔案系統\n"
+" -m, --mtab 搜尋在中表格的掛載的檔案系統\n"
+" -k, --kernel 搜尋在中內核表格的掛載\n"
+" 檔案系統 (預設)\n"
+"\n"
-#: sys-utils/eject.c:1139
+#: misc-utils/hardlink.c:1172
#, fuzzy
-msgid "tape offline command succeeded"
-msgstr "磁帶離線命令成功"
+msgid " -M, --minimize reverse the meaning of -m\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/eject.c:1140
+#: misc-utils/hardlink.c:1173
#, fuzzy
-msgid "tape offline command failed"
-msgstr "磁帶離線命令失敗"
+msgid " -n, --dry-run don't actually link anything\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/eject.c:1144
+#: misc-utils/hardlink.c:1174
#, fuzzy
-msgid "unable to eject"
-msgstr "無法退出"
-
-#: sys-utils/fallocate.c:60
-#, fuzzy, c-format
-msgid " %s [options] <filename>\n"
-msgstr " %s [選項] <filename>\n"
+msgid " -o, --ignore-owner ignore owner changes\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: sys-utils/fallocate.c:62
-#, fuzzy
+#: misc-utils/hardlink.c:1175
msgid ""
-" -n, --keep-size don't modify the length of the file\n"
-" -p, --punch-hole punch holes in the file\n"
-" -o, --offset <num> offset of the allocation, in bytes\n"
-" -l, --length <num> length of the allocation, in bytes\n"
+" -O, --keep-oldest keep the oldest file of multiple equal files\n"
+" (lower precedence than minimize/maximize)\n"
msgstr ""
-" -n, --keep-size 不修改長度的檔案\n"
-" -p, --punch-hole 打孔漏洞在中檔案\n"
-" -o, --offset <num> 偏移的配額，在中位元組\n"
-" -l, --length<num> 長度的配額，在中位元組\n"
-#: sys-utils/fallocate.c:136
-msgid "no length argument specified"
-msgstr "未指定任何長度引數"
+#: misc-utils/hardlink.c:1177
+#, fuzzy
+msgid " -p, --ignore-mode ignore changes of file mode\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: sys-utils/fallocate.c:138
-msgid "invalid length value specified"
-msgstr "指定了無效的長度值"
+#: misc-utils/hardlink.c:1178
+#, fuzzy
+msgid " -q, --quiet quiet mode - don't print anything\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: sys-utils/fallocate.c:140
-msgid "invalid offset value specified"
-msgstr "指定了無效的偏移值"
+#: misc-utils/hardlink.c:1179
+#, fuzzy
+msgid " -r, --cache-size <size> memory limit for cached file content data\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/fallocate.c:142
-msgid "no filename specified."
-msgstr "未指定任何檔名。"
+#: misc-utils/hardlink.c:1180
+#, fuzzy
+msgid " -s, --minimum-size <size> minimum size for files.\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/fallocate.c:167
-msgid "keep size mode (-n option) unsupported"
-msgstr "保持大小模式 (-n 選項) 未受支援"
+#: misc-utils/hardlink.c:1181
+#, fuzzy
+msgid " -S, --maximum-size <size> maximum size for files.\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/fallocate.c:168
-#, c-format
-msgid "%s: fallocate failed"
-msgstr "%s：fallocate 失敗"
+#: misc-utils/hardlink.c:1182
+#, fuzzy
+msgid " -t, --ignore-time ignore timestamps (when testing for equality)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/flock.c:52
-#, fuzzy, c-format
-msgid ""
-" %1$s [options] <file|directory> <command> [<arguments>...]\n"
-" %1$s [options] <file|directory> -c <command>\n"
-" %1$s [options] <file descriptor number>\n"
+#: misc-utils/hardlink.c:1183
+#, fuzzy
+msgid " -v, --verbose verbose output (repeat for more verbosity)\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: misc-utils/hardlink.c:1184
+msgid " -x, --exclude <regex> regular expression to exclude files\n"
msgstr ""
-" %1$s [選項] <file descriptor number>\n"
-" %1$s [選項]<檔案>-c<命令>\n"
-" %1$s [選項}<目錄>-c<命令>\n"
-#: sys-utils/flock.c:57
-#, fuzzy
-msgid " -s --shared get a shared lock\n"
-msgstr " -s --shared 提取共享的鎖定\n"
+#: misc-utils/hardlink.c:1186
+msgid " -X, --respect-xattrs respect extended attributes\n"
+msgstr ""
-#: sys-utils/flock.c:58
+#: misc-utils/hardlink.c:1188
#, fuzzy
-msgid " -x --exclusive get an exclusive lock (default)\n"
-msgstr " -x --exclusive 提取專用鎖定 (預設)\n"
+msgid " -y, --method <name> file content comparison method\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: sys-utils/flock.c:59
+#: misc-utils/hardlink.c:1191
#, fuzzy
-msgid " -u --unlock remove a lock\n"
-msgstr " -u --unlock 移除鎖定\n"
+msgid " --reflink[=<when>] create clone/CoW copies (auto, always, never)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: sys-utils/flock.c:60
-#, fuzzy
-msgid " -n --nonblock fail rather than wait\n"
-msgstr " -n --nonblock 失敗而非等待\n"
+#: misc-utils/hardlink.c:1192
+msgid " --skip-reflinks skip already cloned files (enabled on --reflink)\n"
+msgstr ""
-#: sys-utils/flock.c:61
+#: misc-utils/hardlink.c:1303
#, fuzzy
-msgid " -w --timeout <secs> wait for a limited amount of time\n"
-msgstr " -w --timeout <secs> 等待限制的數目的時間\n"
+msgid "failed to parse minimum size"
+msgstr "剖析大小時失敗"
-#: sys-utils/flock.c:62
+#: misc-utils/hardlink.c:1306
#, fuzzy
-msgid ""
-" -E --conflict-exit-code <number> exit code after conflict or timeout\n"
-msgstr " -E --conflict-exit-code <number> 離開代碼之後衝突或逾時\n"
+msgid "failed to parse maximum size"
+msgstr "剖析大小時失敗"
-#: sys-utils/flock.c:63
+#: misc-utils/hardlink.c:1309
#, fuzzy
-msgid ""
-" -o --close close file descriptor before running command\n"
-msgstr " -o --close 關閉檔案描述符號之前執行中命令\n"
+msgid "failed to parse cache size"
+msgstr "剖析大小時失敗"
-#: sys-utils/flock.c:64
+#: misc-utils/hardlink.c:1312
#, fuzzy
-msgid ""
-" -c --command <command> run a single command string through the shell\n"
-msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+msgid "failed to parse I/O size"
+msgstr "剖析大小時失敗"
-#: sys-utils/flock.c:97
+#: misc-utils/hardlink.c:1325
#, fuzzy, c-format
-msgid "cannot open lock file %s"
-msgstr "無法開啟鎖定檔案 %s"
+msgid "unsupported reflink mode; %s"
+msgstr "不受支援的命令"
-#: sys-utils/flock.c:177
+#: misc-utils/hardlink.c:1406
#, fuzzy
-msgid "invalid timeout value"
-msgstr "ç\84¡æ\95\88ç\9a\84é\80¾æ\99\82å¼\95æ\95¸"
+msgid "cannot register exit handler"
+msgstr "ç\84¡æ³\95è¨å®\9aä¿¡è\99\9fè\99\95ç\90\86ç¨\8bå¼\8f"
-#: sys-utils/flock.c:179
+#: misc-utils/hardlink.c:1411
#, fuzzy
-msgid "timeout cannot be zero"
-msgstr "逾時無法零"
+msgid "no directory or file specified"
+msgstr "沒有迴圈裝置指定的"
+
+#: misc-utils/hardlink.c:1417
+#, c-format
+msgid "cannot initialize %s method, use 'memcmp' fallback"
+msgstr ""
-#: sys-utils/flock.c:183
+#: misc-utils/hardlink.c:1422
#, fuzzy
-msgid "invalid exit code"
-msgstr "無效的離開代碼"
+msgid "failed to initialize files comparior"
+msgstr "初始化 loopcxt 時失敗"
+
+#: misc-utils/hardlink.c:1434
+msgid "Scanning [device/inode/links]:"
+msgstr ""
-#: sys-utils/flock.c:203
+#: misc-utils/hardlink.c:1439 sys-utils/fstrim.c:97
#, fuzzy, c-format
-msgid "%s requires exactly one command argument"
-msgstr "%s 需求精確的一個指令引數"
+msgid "cannot get realpath: %s"
+msgstr "無法讀取 %s"
-#: sys-utils/flock.c:224
-#, fuzzy
-msgid "requires file descriptor, file or directory"
-msgstr "需求檔案描述符號，檔案或目錄"
+#: misc-utils/hardlink.c:1445
+#, fuzzy, c-format
+msgid "cannot process %s"
+msgstr "無法存取 %s"
-#: sys-utils/flock.c:309 sys-utils/swapon.c:303 sys-utils/unshare.c:141
-msgid "waitpid failed"
-msgstr "waitpid 失敗"
+#: misc-utils/kill.c:171
+#, fuzzy, c-format
+msgid "unknown signal %s; valid signals:"
+msgstr "%s：不明信號 %s; 有效信號：\n"
-#: sys-utils/fsfreeze.c:50
+#: misc-utils/kill.c:197
#, fuzzy, c-format
-msgid " %s [options] <mountpoint>\n"
-msgstr " %s [選項] <mount point>\n"
+msgid " %s [options] <pid>|<name>...\n"
+msgstr " %s [選項] <device> [...]\n"
-#: sys-utils/fsfreeze.c:52
-#, fuzzy
-msgid " -f, --freeze freeze the filesystem\n"
-msgstr " t 變更檔案系統的類型"
+#: misc-utils/kill.c:200
+msgid "Forcibly terminate a process.\n"
+msgstr ""
-#: sys-utils/fsfreeze.c:53
-msgid " -u, --unfreeze unfreeze the filesystem\n"
+#: misc-utils/kill.c:203
+msgid ""
+" -a, --all do not restrict the name-to-pid conversion to processes\n"
+" with the same uid as the present process\n"
msgstr ""
-#: sys-utils/fsfreeze.c:112
-msgid "neither --freeze or --unfreeze specified"
+#: misc-utils/kill.c:205
+msgid " -s, --signal <signal> send this <signal> instead of SIGTERM\n"
msgstr ""
-#: sys-utils/fsfreeze.c:114
-msgid "no filename specified"
-msgstr "未指定任何檔名"
+#: misc-utils/kill.c:207
+#, fuzzy
+msgid " -q, --queue <value> use sigqueue(2), not kill(2), and pass <value> as data\n"
+msgstr " -q, --queue-id <id> 移除訊息佇列由識別號\n"
-#: sys-utils/fsfreeze.c:132
-#, c-format
-msgid "%s: is not a directory"
-msgstr "%s：並非目錄"
+#: misc-utils/kill.c:210
+msgid ""
+" --timeout <milliseconds> <follow-up signal>\n"
+" wait up to timeout and send follow-up signal\n"
+msgstr ""
-#: sys-utils/fsfreeze.c:139
-#, c-format
-msgid "%s: freeze failed"
-msgstr "%s：凍結時失敗"
+#: misc-utils/kill.c:213
+#, fuzzy
+msgid " -p, --pid print pids without signaling them\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/fsfreeze.c:145
-#, c-format
-msgid "%s: unfreeze failed"
-msgstr "%s：解除凍結時失敗"
+#: misc-utils/kill.c:214
+msgid " -l, --list[=<signal>] list signal names, or convert a signal number to a name\n"
+msgstr ""
-#: sys-utils/fstrim.c:58
-#, fuzzy, c-format
-msgid " %s [options] <mount point>\n"
-msgstr " %s [選項] <mount point>\n"
+#: misc-utils/kill.c:215
+msgid " -L, --table list signal names and numbers\n"
+msgstr ""
-#: sys-utils/fstrim.c:60
-#, fuzzy
-msgid ""
-" -o, --offset <num> offset in bytes to discard from\n"
-" -l, --length <num> length of bytes to discard from the offset\n"
-" -m, --minimum <num> minimum extent length to discard\n"
-" -v, --verbose print number of discarded bytes\n"
+#: misc-utils/kill.c:216
+msgid " -r, --require-handler do not send signal if signal handler is not present\n"
msgstr ""
-" -o, --offset <num> 偏移在中位元組到捨棄從\n"
-" -l, --length<num> 長度的位元組到捨棄從偏移\n"
-" -m, --minimum<num>最小延伸長度到捨棄\n"
-" -v, --verbose 列印捨棄的位元組數量\n"
-#: sys-utils/fstrim.c:114
+#: misc-utils/kill.c:217
#, fuzzy
-msgid "failed to parse minimum extent length"
-msgstr "剖析最小延伸長度時失敗"
+msgid " --verbose print pids that will be signaled\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/fstrim.c:126
-#, fuzzy
-msgid "no mountpoint specified"
-msgstr "沒有 mountpoint 指定的。"
+#: misc-utils/kill.c:241
+msgid " (with: "
+msgstr ""
-#: sys-utils/fstrim.c:138 sys-utils/mountpoint.c:197
+#: misc-utils/kill.c:290 misc-utils/kill.c:299 sys-utils/setpriv.c:448
+#: sys-utils/unshare.c:873
#, fuzzy, c-format
-msgid "%s: not a directory"
-msgstr "%sï¼\9aä¸\8dæ\98¯ç\9b®é\8c\84"
+msgid "unknown signal: %s"
+msgstr "%sï¼\9aä¸\8dæ\98\8eä¿¡è\99\9f %s\n"
-#: sys-utils/fstrim.c:145
+#: misc-utils/kill.c:314 misc-utils/kill.c:317 misc-utils/kill.c:326
+#: misc-utils/kill.c:338 misc-utils/kill.c:381 sys-utils/mountpoint.c:195
#, fuzzy, c-format
-msgid "%s: FITRIM ioctl failed"
-msgstr "%s：FITRIM ioctl 失敗"
+msgid "%s and %s are mutually exclusive"
+msgstr "彼此互斥。"
-#. TRANSLATORS: The standard value here is a very large number.
-#: sys-utils/fstrim.c:152
+#: misc-utils/kill.c:341 misc-utils/kill.c:356 sys-utils/eject.c:210
+#: sys-utils/eject.c:232 sys-utils/losetup.c:730 sys-utils/tunelp.c:164
+#: sys-utils/tunelp.c:171 sys-utils/tunelp.c:178 sys-utils/tunelp.c:185
+#: sys-utils/tunelp.c:192 sys-utils/tunelp.c:198 sys-utils/tunelp.c:202
+#: sys-utils/tunelp.c:209 term-utils/setterm.c:211 term-utils/setterm.c:214
+#: term-utils/setterm.c:233 term-utils/setterm.c:235 term-utils/setterm.c:273
+#: term-utils/setterm.c:275 term-utils/setterm.c:291 term-utils/setterm.c:298
+#: term-utils/setterm.c:300 term-utils/setterm.c:312 term-utils/setterm.c:314
+#: term-utils/setterm.c:323 term-utils/setterm.c:331 term-utils/setterm.c:346
+#: term-utils/setterm.c:348 term-utils/setterm.c:360 term-utils/setterm.c:362
+#: term-utils/setterm.c:373 term-utils/setterm.c:561 term-utils/setterm.c:566
+#: term-utils/setterm.c:571 term-utils/setterm.c:576 term-utils/setterm.c:600
+#: term-utils/setterm.c:605 term-utils/setterm.c:610 term-utils/setterm.c:615
+#: term-utils/setterm.c:620 term-utils/setterm.c:625 term-utils/setterm.c:634
+#: term-utils/setterm.c:669 text-utils/more.c:329
+#, fuzzy
+msgid "argument error"
+msgstr "引數錯誤。"
+
+#: misc-utils/kill.c:378
#, fuzzy, c-format
-msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
-msgstr "%s：%<PRIu64> 位元組被已修整\n"
+msgid "invalid signal name or number: %s"
+msgstr "無效的 sigval 引數"
-#: sys-utils/hwclock.c:155 sys-utils/hwclock.c:157
+#: misc-utils/kill.c:404
#, fuzzy, c-format
-msgid "cannot write %s"
-msgstr "無法寫入 %s"
+msgid "pidfd_open() failed: %d"
+msgstr "開啟失敗：%s"
-#: sys-utils/hwclock.c:226
-#, c-format
-msgid "Assuming hardware clock is kept in %s time.\n"
-msgstr "假設硬體時鐘被保持在 %s 時間。\n"
+#: misc-utils/kill.c:409 misc-utils/kill.c:423
+#, fuzzy
+msgid "pidfd_send_signal() failed"
+msgstr "settimeofday() 失敗"
-#: sys-utils/hwclock.c:227 sys-utils/hwclock.c:317
-msgid "UTC"
-msgstr "UTC"
+#: misc-utils/kill.c:420
+#, fuzzy, c-format
+msgid "timeout, sending signal %d to pid %d\n"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/hwclock.c:227 sys-utils/hwclock.c:316
-msgid "local"
-msgstr "本地"
+#: misc-utils/kill.c:435
+#, fuzzy, c-format
+msgid "sending signal %d to pid %d\n"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/hwclock.c:301
-#, fuzzy
-msgid ""
-"Warning: unrecognized third line in adjtime file\n"
-"(Expected: `UTC' or `LOCAL' or nothing.)"
-msgstr ""
-"警告：無法辨識的第三列在中 adjtime 檔案\n"
-"(預期：『UTC』或『本地』或沒有任何東西.)"
+#: misc-utils/kill.c:453
+#, fuzzy, c-format
+msgid "sending signal to %s failed"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/hwclock.c:310
+#: misc-utils/kill.c:478
#, c-format
-msgid "Last drift adjustment done at %ld seconds after 1969\n"
-msgstr "最後一次偏差調整已於 1969 年之後 %ld 秒完成\n"
+msgid "not signalling pid %d, it has no userspace handler for signal %d\n"
+msgstr ""
-#: sys-utils/hwclock.c:312
-#, c-format
-msgid "Last calibration done at %ld seconds after 1969\n"
-msgstr "最後一次校測已於 1969 年之後 %ld 秒完成\n"
+#: misc-utils/kill.c:540
+#, fuzzy, c-format
+msgid "cannot find process \"%s\""
+msgstr "%s：找不到行程「%s」\n"
-#: sys-utils/hwclock.c:314
-#, c-format
-msgid "Hardware clock is on %s time\n"
-msgstr "硬體時鐘位於 %s 時間\n"
+#: misc-utils/logger.c:230
+#, fuzzy, c-format
+msgid "unknown facility name: %s"
+msgstr "不明機能名稱：%s。"
-#: sys-utils/hwclock.c:341
-#, c-format
-msgid "Waiting for clock tick...\n"
-msgstr "等候時鐘週期…\n"
+#: misc-utils/logger.c:236
+#, fuzzy, c-format
+msgid "unknown priority name: %s"
+msgstr "不明優先權名稱：%s。"
-#: sys-utils/hwclock.c:347
-#, c-format
-msgid "...synchronization failed\n"
-msgstr "…同步化失敗\n"
+#: misc-utils/logger.c:248
+#, fuzzy, c-format
+msgid "openlog %s: pathname too long"
+msgstr "openlog %s：路徑名稱太長"
-#: sys-utils/hwclock.c:349
-#, c-format
-msgid "...got clock tick\n"
-msgstr "…獲得時鐘週期\n"
+#: misc-utils/logger.c:275
+#, fuzzy, c-format
+msgid "socket %s"
+msgstr "通訊端 %s"
-#: sys-utils/hwclock.c:412
-#, c-format
-msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
-msgstr "硬體時鐘的無效值：%4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
+#: misc-utils/logger.c:312
+#, fuzzy, c-format
+msgid "failed to resolve name %s port %s: %s"
+msgstr "掛載移動 %s 到 %s 時失敗"
-#: sys-utils/hwclock.c:421
-#, c-format
-msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
-msgstr "硬體時鐘時間：%4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
+#: misc-utils/logger.c:329
+#, fuzzy, c-format
+msgid "failed to connect to %s port %s"
+msgstr "掛載移動 %s 到 %s 時失敗"
-#: sys-utils/hwclock.c:455
+#: misc-utils/logger.c:377
#, c-format
-msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
-msgstr "從硬體時鐘讀取時間：%4d/%.2d/%.2d %02d:%02d:%02d\n"
+msgid "maximum input lines (%d) exceeded"
+msgstr ""
-#: sys-utils/hwclock.c:483
-#, c-format
-msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
-msgstr "設定硬體時鐘為 %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
+#: misc-utils/logger.c:520
+#, fuzzy
+msgid "send message failed"
+msgstr "建立訊息佇列時失敗"
-#: sys-utils/hwclock.c:489
+#: misc-utils/logger.c:590
#, c-format
-msgid "Clock not changed - testing only.\n"
-msgstr "時鐘未變更 - 只做為測試。\n"
+msgid "structured data ID '%s' is not unique"
+msgstr ""
-#: sys-utils/hwclock.c:547
+#: misc-utils/logger.c:604
#, c-format
-msgid ""
-"Time elapsed since reference time has been %.6f seconds.\n"
-"Delaying further to reach the new time.\n"
+msgid "--sd-id was not specified for --sd-param %s"
msgstr ""
-"從參考時間起算已經過 %.6f 秒。\n"
-"多延遲一點以達到新的時間。\n"
-#: sys-utils/hwclock.c:583
+#: misc-utils/logger.c:808
#, fuzzy
-msgid ""
-"The Hardware Clock registers contain values that are either invalid (e.g. "
-"50th day of month) or beyond the range we can handle (e.g. Year 2095)."
-msgstr ""
-"硬體鐘訊暫存器包含值所還是無效的(例如：50 th 月中某日) 或位於之後範圍我們可以"
-"控柄(例如：年 2095)。"
+msgid "localtime() failed"
+msgstr "意見調查() 失敗"
-#: sys-utils/hwclock.c:593
-#, c-format
-msgid "%s %.6f seconds\n"
-msgstr "%s %.6f 秒\n"
+#: misc-utils/logger.c:818
+#, fuzzy, c-format
+msgid "hostname '%s' is too long"
+msgstr "欄位 %s 太長"
+
+#: misc-utils/logger.c:824
+#, fuzzy, c-format
+msgid "tag '%s' is too long"
+msgstr "欄位 %s 太長"
+
+#: misc-utils/logger.c:887
+#, fuzzy, c-format
+msgid "ignoring unknown option argument: %s"
+msgstr "不明引數：%s"
+
+#: misc-utils/logger.c:899
+#, fuzzy, c-format
+msgid "invalid argument: %s: using automatic errors"
+msgstr "無效的引數到 --auto /-a 選項"
-#: sys-utils/hwclock.c:624
+#: misc-utils/logger.c:1059
+#, fuzzy, c-format
+msgid " %s [options] [<message>]\n"
+msgstr " %s [選項] [訊息]\n"
+
+#: misc-utils/logger.c:1062
#, fuzzy
-msgid "No --date option specified."
-msgstr "沒有 --date 選項指定的。"
+msgid "Enter messages into the system log.\n"
+msgstr "無法設定系統時鐘。\n"
-#: sys-utils/hwclock.c:630
+#: misc-utils/logger.c:1065
#, fuzzy
-msgid "--date argument too long"
-msgstr "--date 引數太長"
+msgid " -i log the logger command's PID\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: sys-utils/hwclock.c:637
+#: misc-utils/logger.c:1066
#, fuzzy
-msgid ""
-"The value of the --date option is not a valid date.\n"
-"In particular, it contains quotation marks."
-msgstr ""
-"值的 --date 選項並非有效日期。\n"
-"尤其，它含有引號。"
+msgid " --id[=<id>] log the given <id>, or otherwise the PID\n"
+msgstr " -a, --all 所有 (預設)\n"
-#: sys-utils/hwclock.c:645
-#, c-format
-msgid "Issuing date command: %s\n"
-msgstr "執行日期命令：%s\n"
+#: misc-utils/logger.c:1067
+#, fuzzy
+msgid " -f, --file <file> log the contents of this file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: misc-utils/logger.c:1068
+#, fuzzy
+msgid " -e, --skip-empty do not log empty lines when processing files\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/hwclock.c:649
-msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
-msgstr "無法在 /bin/sh 命令殼中運行「date」程式。popen() 失敗"
+#: misc-utils/logger.c:1069
+#, fuzzy
+msgid " --no-act do everything except the write the log\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/hwclock.c:657
-#, c-format
-msgid "response from date command = %s\n"
-msgstr "日期命令的回應 = %s\n"
+#: misc-utils/logger.c:1070
+#, fuzzy
+msgid " -p, --priority <prio> mark given message with this priority\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/hwclock.c:659
-#, fuzzy, c-format
-msgid ""
-"The date command issued by %s returned unexpected results.\n"
-"The command was:\n"
-" %s\n"
-"The response was:\n"
-" %s"
+#: misc-utils/logger.c:1071
+msgid " --octet-count use rfc6587 octet counting\n"
msgstr ""
-"日期命令議題的由 %s 回傳的未預期的結果。\n"
-"命令是：\n"
-" %s\n"
-"回應是：\n"
-" %s"
-#: sys-utils/hwclock.c:670
-#, c-format
-msgid ""
-"The date command issued by %s returned something other than an integer where "
-"the converted time value was expected.\n"
-"The command was:\n"
-" %s\n"
-"The response was:\n"
-" %s\n"
+#: misc-utils/logger.c:1072
+msgid " --prio-prefix look for a prefix on every line read from stdin\n"
msgstr ""
-"由 %s 所執行的日期命令回傳了一些非整數的東西，而非預期己轉換的時間值。\n"
-"命令是：\n"
-" %s\n"
-"回應是：\n"
-"%s\n"
-
-#: sys-utils/hwclock.c:682
-#, c-format
-msgid "date string %s equates to %ld seconds since 1969.\n"
-msgstr "日期字串 %s 表示自 1969 年以來己過 %ld 秒。\n"
-#: sys-utils/hwclock.c:714
+#: misc-utils/logger.c:1073
#, fuzzy
-msgid ""
-"The Hardware Clock does not contain a valid time, so we cannot set the "
-"System Time from it."
-msgstr "硬體時鐘不包含有效時間，因而我們無法設定系統時間從它。"
-
-#: sys-utils/hwclock.c:736 sys-utils/hwclock.c:816
-#, c-format
-msgid "Calling settimeofday:\n"
-msgstr "呼叫 settimeofday：\n"
+msgid " -s, --stderr output message to standard error as well\n"
+msgstr " -s 列印訊息到標準輸出\n"
-#: sys-utils/hwclock.c:737 sys-utils/hwclock.c:818
-#, c-format
-msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
-msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
+#: misc-utils/logger.c:1074
+#, fuzzy
+msgid " -S, --size <size> maximum size for a single message\n"
+msgstr " -o, --office <office> 辦公室數字\n"
-#: sys-utils/hwclock.c:739 sys-utils/hwclock.c:820
-#, c-format
-msgid "\ttz.tz_minuteswest = %d\n"
-msgstr "\ttz.tz_minuteswest = %d\n"
+#: misc-utils/logger.c:1075
+msgid " -t, --tag <tag> mark every line with this tag\n"
+msgstr ""
-#: sys-utils/hwclock.c:743 sys-utils/hwclock.c:824
-#, c-format
-msgid "Not setting system clock because running in test mode.\n"
-msgstr "未設定系統時鐘，因為在測試模式中執行。\n"
+#: misc-utils/logger.c:1076
+msgid " -n, --server <name> write to this remote syslog server\n"
+msgstr ""
-#: sys-utils/hwclock.c:752 sys-utils/hwclock.c:848
+#: misc-utils/logger.c:1077
#, fuzzy
-msgid "Must be superuser to set system clock."
-msgstr "必須是系統管理者到設定系統時鐘。"
-
-#: sys-utils/hwclock.c:755 sys-utils/hwclock.c:851
-msgid "settimeofday() failed"
-msgstr "settimeofday() 失敗"
+msgid " -P, --port <port> use this port for UDP or TCP connection\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
-#: sys-utils/hwclock.c:791
-#, c-format
-msgid "Current system time: %ld = %s\n"
-msgstr "目前的系統時間：%ld = %s\n"
+#: misc-utils/logger.c:1078
+#, fuzzy
+msgid " -T, --tcp use TCP only\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: sys-utils/hwclock.c:817
-#, c-format
-msgid "\tUTC: %s\n"
-msgstr "\tUTC：%s\n"
+#: misc-utils/logger.c:1079
+#, fuzzy
+msgid " -d, --udp use UDP only\n"
+msgstr " -r, --reset 重置通訊埠\n"
-#: sys-utils/hwclock.c:880
-#, c-format
-msgid ""
-"Not adjusting drift factor because the Hardware Clock previously contained "
-"garbage.\n"
-msgstr "無法調整偏差係數，因為之前的硬體時鐘包含了無用資料。\n"
+#: misc-utils/logger.c:1080
+#, fuzzy
+msgid " --rfc3164 use the obsolete BSD syslog protocol\n"
+msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
-#: sys-utils/hwclock.c:885
-#, c-format
+#: misc-utils/logger.c:1081
msgid ""
-"Not adjusting drift factor because last calibration time is zero,\n"
-"so history is bad and calibration startover is necessary.\n"
+" --rfc5424[=<snip>] use the syslog protocol (the default for remote);\n"
+" <snip> can be notime, or notq, and/or nohost\n"
msgstr ""
-"無法調整偏差係數，因為最後一次校測時間為零，\n"
-"因而不當的歷史記錄使得啟始校測為必要的。\n"
-#: sys-utils/hwclock.c:891
-#, c-format
-msgid ""
-"Not adjusting drift factor because it has been less than a day since the "
-"last calibration.\n"
-msgstr "無法調整偏差係數，因為它從最後一次校測起已經慢過於一天。\n"
+#: misc-utils/logger.c:1083
+#, fuzzy
+msgid " --sd-id <id> rfc5424 structured data ID\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/hwclock.c:939
-#, c-format
-msgid ""
-"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor "
-"of %f seconds/day.\n"
-"Adjusting drift factor by %f seconds/day\n"
+#: misc-utils/logger.c:1084
+msgid " --sd-param <data> rfc5424 structured data name=value\n"
msgstr ""
-"時鐘偏差為 %.1f 秒發生於過去 %d 秒內，而不管 %f 秒/天的偏差係數。\n"
-"以 %f 秒/天來調整偏差係數\n"
-
-#: sys-utils/hwclock.c:985
-#, c-format
-msgid "Time since last adjustment is %d seconds\n"
-msgstr "從最後一次調整後經過的時間為 %d 秒\n"
-#: sys-utils/hwclock.c:987
-#, c-format
-msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
-msgstr "需要插入 %d 秒並回溯參考 %.6f 秒之前的時間\n"
+#: misc-utils/logger.c:1085
+#, fuzzy
+msgid " --msgid <msgid> set rfc5424 message id field\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/hwclock.c:1017
-#, c-format
-msgid "Not updating adjtime file because of testing mode.\n"
-msgstr "無法更新 adjtime 檔案，因為處於測試模式。\n"
+#: misc-utils/logger.c:1086
+msgid " -u, --socket <socket> write to this Unix socket\n"
+msgstr ""
-#: sys-utils/hwclock.c:1018
-#, c-format
+#: misc-utils/logger.c:1087
msgid ""
-"Would have written the following to %s:\n"
-"%s"
+" --socket-errors[=<on|off|auto>]\n"
+" print connection errors when using Unix sockets\n"
msgstr ""
-"將會寫入下列資料到 %s:\n"
-"%s"
-#: sys-utils/hwclock.c:1027
-#, c-format
-msgid ""
-"Could not open file with the clock adjustment parameters in it (%s) for "
-"writing"
-msgstr "無法以其中的時鐘調整參數 (%s) 開啟檔案用於寫入"
+#: misc-utils/logger.c:1090
+msgid " --journald[=<file>] write journald entry\n"
+msgstr ""
-#: sys-utils/hwclock.c:1033 sys-utils/hwclock.c:1040
-#, c-format
-msgid "Could not update file with the clock adjustment parameters (%s) in it"
-msgstr "無法以其中的時鐘調整參數 (%s) 更新檔案"
+#: misc-utils/logger.c:1176
+#, fuzzy, c-format
+msgid "file %s"
+msgstr "檔案 %s"
-#: sys-utils/hwclock.c:1048
+#: misc-utils/logger.c:1191
#, fuzzy
-msgid "Drift adjustment parameters not updated."
-msgstr "漂移調整參數無法更新。"
+msgid "failed to parse id"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/hwclock.c:1087
+#: misc-utils/logger.c:1209
#, fuzzy
-msgid ""
-"The Hardware Clock does not contain a valid time, so we cannot adjust it."
-msgstr "硬體時鐘不包含有效時間，因而我們無法調整它。"
+msgid "failed to parse message size"
+msgstr "剖析大小時失敗"
-#: sys-utils/hwclock.c:1096
-#, c-format
-msgid ""
-"Not setting clock because last adjustment time is zero, so history is bad."
-msgstr "無法設定時鐘因為最後一次調整時間為零，因而歷史記錄是不當的。"
+#: misc-utils/logger.c:1239
+msgid "--msgid cannot contain space"
+msgstr ""
-#: sys-utils/hwclock.c:1118
-#, c-format
-msgid "Needed adjustment is less than one second, so not setting clock.\n"
-msgstr "所需的調整少於一秒鐘，因而無法設定時鐘。\n"
+#: misc-utils/logger.c:1261
+#, fuzzy, c-format
+msgid "invalid structured data ID: '%s'"
+msgstr "無效的引數：%s"
-#: sys-utils/hwclock.c:1143
-#, c-format
-msgid "Using %s.\n"
-msgstr "正在使用 %s。\n"
+#: misc-utils/logger.c:1266
+#, fuzzy, c-format
+msgid "invalid structured data parameter: '%s'"
+msgstr "無效的逾時引數：%s"
-#: sys-utils/hwclock.c:1145
-#, c-format
-msgid "No usable clock interface found.\n"
-msgstr "找不到可用的時鐘介面。\n"
+#: misc-utils/logger.c:1281
+#, fuzzy
+msgid "--file <file> and <message> are mutually exclusive, message is ignored"
+msgstr "--offset 和 --all 彼此互斥"
-#: sys-utils/hwclock.c:1274 sys-utils/hwclock.c:1280
-#, c-format
-msgid "Unable to set system clock.\n"
-msgstr "無法設定系統時鐘。\n"
+#: misc-utils/logger.c:1288
+msgid "journald entry could not be written"
+msgstr ""
-#: sys-utils/hwclock.c:1293
-#, c-format
-msgid ""
-"At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
-msgstr "1969 年之後 %ld 秒, RTC 預計會讀取 1969 之後 %ld 秒。\n"
+#: misc-utils/look.c:357
+#, fuzzy, c-format
+msgid " %s [options] <string> [<file>...]\n"
+msgstr " %s [選項] 字串 [檔案]\n"
-#: sys-utils/hwclock.c:1322
-#, fuzzy
-msgid ""
-"The kernel keeps an epoch value for the Hardware Clock only on an Alpha "
-"machine.\n"
-"This copy of hwclock was built for a machine other than Alpha\n"
-"(and thus is presumably not running on an Alpha now). No action taken."
+#: misc-utils/look.c:360
+msgid "Display lines beginning with a specified string.\n"
msgstr ""
-"內核保持時期值用於硬體時鐘只有於 Alpha 機器。\n"
-"這個複製的 hwclock 是 built 用於機器不同於 Alpha\n"
-"(和因而是據推測無法執行中於 Alpha 現在)。 未採取任何行動。"
-#: sys-utils/hwclock.c:1339
+#: misc-utils/look.c:363
#, fuzzy
-msgid "Unable to get the epoch value from the kernel."
-msgstr "無法提取時期值從內核。"
-
-#: sys-utils/hwclock.c:1341
-#, c-format
-msgid "Kernel is assuming an epoch value of %lu\n"
-msgstr "內核假設時期值為 %lu\n"
+msgid " -a, --alternative use the alternative dictionary\n"
+msgstr " -a, --alternative 允許長選項開始與單一 -\n"
-#: sys-utils/hwclock.c:1346
+#: misc-utils/look.c:364
#, fuzzy
-msgid ""
-"To set the epoch value, you must use the 'epoch' option to tell to what "
-"value to set it."
-msgstr "要設定時期值，您必須使用『時期』選項到告訴到什麼值到設定它。"
-
-#: sys-utils/hwclock.c:1350
-#, c-format
-msgid "Not setting the epoch to %d - testing only.\n"
-msgstr "不將時期設定為 %d - 只限於測試。\n"
-
-#: sys-utils/hwclock.c:1354
-#, c-format
-msgid "Unable to set the epoch value in the kernel.\n"
-msgstr "無法在內核中設定時期值。\n"
+msgid " -d, --alphanum compare only blanks and alphanumeric characters\n"
+msgstr " -c, --chars <num> 輸出字元數的之前暫停\n"
-#: sys-utils/hwclock.c:1443
+#: misc-utils/look.c:365
#, fuzzy
-msgid " hwclock [function] [option...]\n"
-msgstr " hwclock [函式] [選項...]\n"
+msgid " -f, --ignore-case ignore case differences when comparing\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/hwclock.c:1445
-#, fuzzy
-msgid ""
-"\n"
-"Functions:\n"
+#: misc-utils/look.c:366
+msgid " -t, --terminate <char> define the string-termination character\n"
msgstr ""
-"\n"
-"函式：\n"
-#: sys-utils/hwclock.c:1446
+#: misc-utils/lsblk.c:170
#, fuzzy
-msgid ""
-" -h, --help show this help text and exit\n"
-" -r, --show read hardware clock and print result\n"
-" --set set the RTC to the time given with --date\n"
+msgid "alignment offset"
+msgstr "對齊偏移"
+
+#: misc-utils/lsblk.c:171
+msgid "udev ID (based on ID-LINK)"
msgstr ""
-" -h, --help 顯示這份說明文字然後離開\n"
-" -r, --show 讀取硬體時鐘和列印結果\n"
-" --set 設定 RTC 到時間給定的與 --date\n"
-#: sys-utils/hwclock.c:1449
-#, fuzzy
-msgid ""
-" -s, --hctosys set the system time from the hardware clock\n"
-" -w, --systohc set the hardware clock from the current system time\n"
-" --systz set the system time based on the current timezone\n"
-" --adjust adjust the RTC to account for systematic drift since\n"
-" the clock was last set or adjusted\n"
-msgstr ""
-" -s, --hctosys 設定系統時間從硬體時鐘\n"
-" -w, --systohc 設定硬體時鐘從目前的系統時間\n"
-" --systz 設定系統時間基於目前的時區\n"
-" --adjust 調整 RTC 到帳號用於 systematic 漂移自從\n"
-" 時鐘是最後一筆設定或調整\n"
-
-#: sys-utils/hwclock.c:1454
-msgid ""
-" -c, --compare periodically compare the system clock with the CMOS "
-"clock\n"
+#: misc-utils/lsblk.c:172
+msgid "the shortest udev /dev/disk/by-id link name"
msgstr ""
-#: sys-utils/hwclock.c:1456
+#: misc-utils/lsblk.c:173
#, fuzzy
-msgid ""
-" --getepoch print out the kernel's hardware clock epoch value\n"
-" --setepoch set the kernel's hardware clock epoch value to the \n"
-" value given with --epoch\n"
-msgstr ""
-" --getepoch 印出內核『s 硬體時鐘時期值\n"
-" --setepoch 設定內核』s 硬體時鐘時期值到\n"
-" 值給定的與 --epoch\n"
+msgid "discard alignment offset"
+msgstr "捨棄對齊偏移"
-#: sys-utils/hwclock.c:1460
+#: misc-utils/lsblk.c:174
#, fuzzy
-msgid ""
-" --predict predict RTC reading at time given with --date\n"
-" -V, --version display version information and exit\n"
-msgstr ""
-" --predict 預測 RTC 讀取於時間給定的與 --date\n"
-" -V, --version 顯示版本資訊然後離開\n"
+msgid "dax-capable device"
+msgstr "可移除的裝置"
-#: sys-utils/hwclock.c:1464
+#: misc-utils/lsblk.c:175
#, fuzzy
-msgid ""
-" -u, --utc the hardware clock is kept in UTC\n"
-" --localtime the hardware clock is kept in local time\n"
-msgstr ""
-" -u, --utc 硬體時鐘被保持在中 UTC\n"
-" --localtime 硬體時鐘被保持在中本地時間\n"
+msgid "discard granularity"
+msgstr "捨棄顆粒性"
-#: sys-utils/hwclock.c:1467
+#: misc-utils/lsblk.c:176
#, fuzzy
-msgid " -f, --rtc <file> special /dev/... file to use instead of default\n"
-msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+msgid "disk sequence number"
+msgstr "邏輯的 NUMA 節點數字"
-#: sys-utils/hwclock.c:1470
-#, fuzzy, c-format
-msgid ""
-" --directisa access the ISA bus directly instead of %s\n"
-" --badyear ignore RTC's year because the BIOS is broken\n"
-" --date <time> specifies the time to which to set the hardware clock\n"
-" --epoch <year> specifies the year which is the beginning of the\n"
-" hardware clock's epoch value\n"
-msgstr ""
-" --directisa 存取 ISA 匯流排直接以代替 %s\n"
-" --badyear 忽略 RTC's 年因為 BIOS 被不完整的\n"
-" --date <time> 指定時間到該項到設定硬體時鐘\n"
-" --epoch<年> 指定年該項是起始部分的\n"
-" 硬體時鐘時期值\n"
+#: misc-utils/lsblk.c:177
+#, fuzzy
+msgid "discard max bytes"
+msgstr "捨棄最大位元組"
-#: sys-utils/hwclock.c:1476
-#, fuzzy, c-format
-msgid ""
-" --noadjfile do not access %s; this requires the use of\n"
-" either --utc or --localtime\n"
-" --adjfile <file> specifies the path to the adjust file;\n"
-" the default is %s\n"
-msgstr ""
-" --noadjfile 不存取 %s；這個需求使用的\n"
-" 還是 --utc 或 --localtime\n"
-" --adjfile <file> 指定路徑到調整檔案；\n"
-" 預設是 %s\n"
-
-#: sys-utils/hwclock.c:1480
+#: misc-utils/lsblk.c:178
#, fuzzy
-msgid ""
-" --test do not update anything, just show what would happen\n"
-" -D, --debug debugging mode\n"
-"\n"
-msgstr ""
-" --test 不更新任何事，僅顯示什麼會發生\n"
-" -D, --debug 偵錯模式\n"
-"\n"
+msgid "discard zeroes data"
+msgstr "捨棄零資料"
-#: sys-utils/hwclock.c:1483
+#: misc-utils/lsblk.c:180
#, fuzzy
-msgid ""
-" -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
-" tell hwclock the type of Alpha you have (see hwclock(8))\n"
-"\n"
-msgstr ""
-" -J|--jensen，-A|--arc，-S|--srm，-F|--funky-toy\n"
-" 告訴 hwclock 型態的 Alpha 您有 (參看 hwclock (8))\n"
-"\n"
+msgid "mounted filesystem roots"
+msgstr "檔案系統根"
-#: sys-utils/hwclock.c:1606
+#: misc-utils/lsblk.c:185
#, fuzzy
-msgid "Unable to connect to audit system"
-msgstr "無法連線到稽核系統"
+msgid "filesystem version"
+msgstr "檔案系統大小"
-#: sys-utils/hwclock.c:1704
+#: misc-utils/lsblk.c:186
#, fuzzy
-msgid "invalid epoch argument"
-msgstr "ç\84¡æ\95\88ç\9a\84æ\99\82æ\9c\9få¼\95æ\95¸"
+msgid "group name"
+msgstr "群çµ\84å\90\8d稱"
-#: sys-utils/hwclock.c:1743
-#, c-format
-msgid "%s takes no non-option arguments. You supplied %d.\n"
-msgstr "%s 無需非選項引數。 您卻已給定 %d。\n"
+#: misc-utils/lsblk.c:187
+msgid "Host:Channel:Target:Lun for SCSI"
+msgstr ""
-#: sys-utils/hwclock.c:1752
-#, fuzzy
-msgid "With --noadjfile, you must specify either --utc or --localtime"
-msgstr "與 --noadjfile，您必須指定還是 --utc 或 --localtime"
+#: misc-utils/lsblk.c:188
+msgid "removable or hotplug device (usb, pcmcia, ...)"
+msgstr ""
-#: sys-utils/hwclock.c:1765
+#: misc-utils/lsblk.c:189
#, fuzzy
-msgid "No usable set-to time. Cannot set clock."
-msgstr "沒有可用 set-to 時間。 無法設定時鐘。"
+msgid "internal kernel device name"
+msgstr "內部內核裝置名稱"
-#: sys-utils/hwclock.c:1780
+#: misc-utils/lsblk.c:190 misc-utils/wipefs.c:110
#, fuzzy
-msgid "Sorry, only the superuser can change the Hardware Clock."
-msgstr "æ\8a±æ\89ï¼\8cå\8fªæ\9c\89系統管ç\90\86è\80\85å\8f¯ä»¥è®\8aæ\9b´ç¡¬é«\94æ\99\82é\90\98ã\80\82"
+msgid "filesystem LABEL"
+msgstr "æª\94æ¡\88系統æ¨\99è²¼"
-#: sys-utils/hwclock.c:1784
+#: misc-utils/lsblk.c:191
#, fuzzy
-msgid "Sorry, only the superuser can change the System Clock."
-msgstr "抱歉，只有系統管理者可以變更系統時鐘。"
+msgid "logical sector size"
+msgstr "邏輯區大小"
-#: sys-utils/hwclock.c:1788
+#: misc-utils/lsblk.c:193
#, fuzzy
-msgid ""
-"Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
-msgstr "抱歉，只有系統管理者可以變更硬體時鐘時期在中內核。"
+msgid "minimum I/O size"
+msgstr "最小 I/O 大小"
-#: sys-utils/hwclock.c:1811
+#: misc-utils/lsblk.c:194
#, fuzzy
-msgid "Cannot access the Hardware Clock via any known method."
-msgstr "無法存取硬體時鐘透過任何已知方法。"
+msgid "device identifier"
+msgstr "裝置識別碼"
-#: sys-utils/hwclock.c:1814
+#: misc-utils/lsblk.c:195
#, fuzzy
-msgid ""
-"Use the --debug option to see the details of our search for an access method."
-msgstr "使用 --debug 選項到參看細節的我們的搜尋存取方法。"
-
-#: sys-utils/hwclock-cmos.c:217
-#, c-format
-msgid "booted from MILO\n"
-msgstr "從 MILO 開機\n"
-
-#: sys-utils/hwclock-cmos.c:229
-#, c-format
-msgid "Ruffian BCD clock\n"
-msgstr "Ruffian BCD 時鐘\n"
-
-#: sys-utils/hwclock-cmos.c:248
-#, c-format
-msgid "clockport adjusted to 0x%x\n"
-msgstr "時鐘通訊埠調整到 0x%x\n"
-
-#: sys-utils/hwclock-cmos.c:264
-#, c-format
-msgid "funky TOY!\n"
-msgstr "畏縮的玩具！\n"
-
-#: sys-utils/hwclock-cmos.c:292
-#, fuzzy, c-format
-msgid "atomic %s failed for 1000 iterations!"
-msgstr "基元的 %s 失敗的用於 1000 反覆運算！"
-
-#: sys-utils/hwclock-cmos.c:318
-#, fuzzy, c-format
-msgid "cmos_read(): write to control address %X failed"
-msgstr "cmosread()(_R)：寫入控制位址 %X 失敗：%m\n"
-
-#: sys-utils/hwclock-cmos.c:322
-#, fuzzy, c-format
-msgid "cmos_read(): read data address %X failed"
-msgstr "cmosread()(_R)：讀取資料位址 %X 失敗：%m\n"
-
-#: sys-utils/hwclock-cmos.c:359
-#, fuzzy, c-format
-msgid "cmos_write(): write to control address %X failed"
-msgstr "cmoswrite()(_W)：寫入控制位址 %X 失敗：%m\n"
-
-#: sys-utils/hwclock-cmos.c:364
-#, fuzzy, c-format
-msgid "cmos_write(): write to data address %X failed"
-msgstr "cmoswrite()(_W)：寫入資料位址 %X 失敗：%m\n"
+msgid "device node permissions"
+msgstr "裝置節點權限"
-#: sys-utils/hwclock-cmos.c:639
+#: misc-utils/lsblk.c:196
#, fuzzy
-msgid "I failed to get permission because I didn't try."
-msgstr "我無法提取權限因為我並未嘗試。"
+msgid "device queues"
+msgstr "裝置名稱"
-#: sys-utils/hwclock-cmos.c:642
+#: misc-utils/lsblk.c:197
#, fuzzy
-msgid "unable to get I/O port access: the iopl(3) call failed."
-msgstr "無法提取 I/O 通訊埠存取： iopl (3) 呼叫失敗。"
-
-#: sys-utils/hwclock-cmos.c:645
-msgid "Probably you need root privileges.\n"
-msgstr "您大概需要系統管理者權限。\n"
+msgid "device name"
+msgstr "裝置名稱"
-#: sys-utils/hwclock-kd.c:47
-#, c-format
-msgid "Waiting in loop for time from KDGHWCLK to change\n"
-msgstr "循環等待自 KDGHWCLK 變更起的時間\n"
+#: misc-utils/lsblk.c:198
+#, fuzzy
+msgid "optimal I/O size"
+msgstr "最佳化 I/O 大小"
-#: sys-utils/hwclock-kd.c:50
-msgid "KDGHWCLK ioctl to read time failed"
-msgstr "KDGHWCLK ioctl 讀取時間失敗"
+#: misc-utils/lsblk.c:201
+#, fuzzy
+msgid "partition LABEL"
+msgstr "分割標貼"
-#: sys-utils/hwclock-kd.c:72
-msgid "KDGHWCLK ioctl to read time failed in loop"
-msgstr "KDGHWCLK ioctl 讀取時間於循環中失敗"
+#: misc-utils/lsblk.c:202
+#, fuzzy
+msgid "partition number as read from the partition table"
+msgstr "%s：無法提取分割區編號"
-#: sys-utils/hwclock-kd.c:79 sys-utils/hwclock-rtc.c:236
+#: misc-utils/lsblk.c:203
#, fuzzy
-msgid "Timed out waiting for time change."
-msgstr "å·²é\80¾æ\99\82ç\89å¾\85æ\99\82é\96\93è®\8aæ\9b´ã\80\82"
+msgid "partition type name"
+msgstr "å\88\86å\89²å\90\8d稱"
-#: sys-utils/hwclock-kd.c:98
-#, c-format
-msgid "ioctl() failed to read time from %s"
-msgstr "ioctl() 從 %s 讀取時間失敗"
+#: misc-utils/lsblk.c:204
+#, fuzzy
+msgid "partition type code or UUID"
+msgstr "分割 UUID"
-#: sys-utils/hwclock-kd.c:134
-msgid "ioctl KDSHWCLK failed"
-msgstr "ioctl KDSHWCLK 失敗"
+#: misc-utils/lsblk.c:206
+#, fuzzy
+msgid "path to the device node"
+msgstr "狀態的裝置"
-#: sys-utils/hwclock-kd.c:170
-msgid "Can't open /dev/tty1 or /dev/vc/1"
-msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
+#: misc-utils/lsblk.c:207
+#, fuzzy
+msgid "physical sector size"
+msgstr "實體磁區大小"
-#: sys-utils/hwclock-kd.c:174
-msgid "KDGHWCLK ioctl failed"
-msgstr "KDGHWCLK ioctl 失敗"
+#: misc-utils/lsblk.c:208
+#, fuzzy
+msgid "internal parent kernel device name"
+msgstr "內部內核裝置名稱"
-#: sys-utils/hwclock-rtc.c:195
-#, fuzzy, c-format
-msgid "ioctl(%s) to %s to read the time failed"
-msgstr "ioctl (%s) 到 %s 到讀取時間失敗"
+#: misc-utils/lsblk.c:209
+#, fuzzy
+msgid "partition table type"
+msgstr "不明的分割表類型"
-#: sys-utils/hwclock-rtc.c:217
-#, c-format
-msgid "Waiting in loop for time from %s to change\n"
-msgstr "循環等候自 %s 變更起的時間\n"
+#: misc-utils/lsblk.c:210
+msgid "partition table identifier (usually UUID)"
+msgstr ""
-#: sys-utils/hwclock-rtc.c:279
-#, c-format
-msgid "%s does not have interrupt functions. "
-msgstr "%s 沒有插斷函式。"
+#: misc-utils/lsblk.c:211
+msgid "adds randomness"
+msgstr ""
-#: sys-utils/hwclock-rtc.c:290
-#, c-format
-msgid "read() to %s to wait for clock tick failed"
-msgstr "%s 的 read() 等候時鐘週期失敗"
+#: misc-utils/lsblk.c:212
+#, fuzzy
+msgid "read-ahead of the device"
+msgstr "預先讀取的的裝置"
-#: sys-utils/hwclock-rtc.c:314
-#, c-format
-msgid "select() to %s to wait for clock tick failed"
-msgstr "%s 的 select() 等候時鐘週期失敗"
+#: misc-utils/lsblk.c:213
+#, fuzzy
+msgid "device revision"
+msgstr "裝置節點權限"
-#: sys-utils/hwclock-rtc.c:317
-#, fuzzy, c-format
-msgid "select() to %s to wait for clock tick timed out"
-msgstr "選取() 到 %s 到等待時鐘週期已逾時"
+#: misc-utils/lsblk.c:214
+#, fuzzy
+msgid "removable device"
+msgstr "可移除的裝置"
-#: sys-utils/hwclock-rtc.c:326
-#, c-format
-msgid "ioctl() to %s to turn off update interrupts failed"
-msgstr "%s 的 ioctl() 關閉更新插斷失敗"
+#: misc-utils/lsblk.c:215
+#, fuzzy
+msgid "rotational device"
+msgstr "rotational 裝置"
-#: sys-utils/hwclock-rtc.c:329
-#, c-format
-msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
-msgstr "%s 的 ioctl() 打開更新插斷意外地失敗"
+#: misc-utils/lsblk.c:216 sys-utils/losetup.c:79
+#, fuzzy
+msgid "read-only device"
+msgstr "唯讀裝置"
-#: sys-utils/hwclock-rtc.c:383
-#, fuzzy, c-format
-msgid "ioctl(%s) to %s to set the time failed."
-msgstr "ioctl (%s) 到 %s 到設定時間失敗。"
+#: misc-utils/lsblk.c:217
+#, fuzzy
+msgid "request queue size"
+msgstr "要求佇列大小"
-#: sys-utils/hwclock-rtc.c:389
-#, c-format
-msgid "ioctl(%s) was successful.\n"
-msgstr "ioctl(%s) 原本成功。\n"
+#: misc-utils/lsblk.c:218
+#, fuzzy
+msgid "I/O scheduler name"
+msgstr "I/O 排程程式名稱"
-#: sys-utils/hwclock-rtc.c:430 sys-utils/hwclock-rtc.c:477
-#, fuzzy, c-format
-msgid ""
-"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' "
-"device driver via the device special file %s. This file does not exist on "
-"this system."
+#: misc-utils/lsblk.c:219
+msgid "disk serial number"
msgstr ""
-"要操控時期值在中內核，我們必須存取 Linux『rtc』裝置驅動程式透過裝置特殊檔案 "
-"%s。 這個檔案不存在於這個系統。"
-#: sys-utils/hwclock-rtc.c:442
-#, c-format
-msgid "ioctl(RTC_EPOCH_READ) to %s failed"
-msgstr "%s 的 ioctl(RTC_EPOCH_READ) 失敗"
-
-#: sys-utils/hwclock-rtc.c:448
-#, c-format
-msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n"
-msgstr "我們已從具備 RTC_EPOCH_READ ioctl 的 %2$s 讀取了時期 %1$ld。\n"
-
-#: sys-utils/hwclock-rtc.c:468
-#, fuzzy, c-format
-msgid "The epoch value may not be less than 1900. You requested %ld"
-msgstr "時期值可能無法是少於 1900. 您要求的 %ld"
+#: misc-utils/lsblk.c:220
+#, fuzzy
+msgid "size of the device"
+msgstr "大小的裝置"
-#: sys-utils/hwclock-rtc.c:487
-#, c-format
-msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n"
-msgstr "設定 epoch 到 %ld 以及 RTC_EPOCH_SET ioctl 到 %s。\n"
+#: misc-utils/lsblk.c:221
+#, fuzzy
+msgid "partition start offset"
+msgstr "分割名稱"
-#: sys-utils/hwclock-rtc.c:493
-#, fuzzy, c-format
-msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
-msgstr "內核裝置驅動程式用於 %s 沒有 RTC_EPOCH_SET ioctl。"
+#: misc-utils/lsblk.c:222
+#, fuzzy
+msgid "state of the device"
+msgstr "狀態的裝置"
-#: sys-utils/hwclock-rtc.c:497
-#, c-format
-msgid "ioctl(RTC_EPOCH_SET) to %s failed"
-msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+#: misc-utils/lsblk.c:223
+msgid "de-duplicated chain of subsystems"
+msgstr ""
-#: sys-utils/ipcmk.c:69
+#: misc-utils/lsblk.c:224
#, fuzzy
-msgid " -M, --shmem <size> create shared memory segment of size <size>\n"
-msgstr " -M, --shmem <size> 建立共用記憶體資料段的大小<大小>\n"
+msgid "all locations where device is mounted"
+msgstr "位置裝置被掛載"
-#: sys-utils/ipcmk.c:70
+#: misc-utils/lsblk.c:225 sys-utils/zramctl.c:86
#, fuzzy
-msgid ""
-" -S, --semaphore <nsems> create semaphore array with <nsems> elements\n"
-msgstr " -S, --semaphore <nsems> 建立號誌陣列與<nsems>元件\n"
+msgid "where the device is mounted"
+msgstr "位置裝置被掛載"
-#: sys-utils/ipcmk.c:71
+#: misc-utils/lsblk.c:226
#, fuzzy
-msgid " -Q, --queue create message queue\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+msgid "device transport type"
+msgstr "裝置類型"
-#: sys-utils/ipcmk.c:72
+#: misc-utils/lsblk.c:227
#, fuzzy
-msgid ""
-" -p, --mode <mode> permission for the resource (default is 0644)\n"
-msgstr " -p, --mode <mode> 權限用於資源 (預設是 0644)\n"
+msgid "device type"
+msgstr "裝置類型"
-#: sys-utils/ipcmk.c:106 sys-utils/losetup.c:557
+#: misc-utils/lsblk.c:229
#, fuzzy
-msgid "failed to parse size"
-msgstr "剖析大小時失敗"
+msgid "device vendor"
+msgstr "裝置名稱"
-#: sys-utils/ipcmk.c:113
+#: misc-utils/lsblk.c:230
#, fuzzy
-msgid "failed to parse elements"
-msgstr "剖析元件時失敗"
-
-#: sys-utils/ipcmk.c:137
-msgid "create share memory failed"
-msgstr "建立共享記憶體時失敗"
-
-#: sys-utils/ipcmk.c:139
-#, c-format
-msgid "Shared memory id: %d\n"
-msgstr "共用記憶體識別號：%d\n"
-
-#: sys-utils/ipcmk.c:145
-msgid "create message queue failed"
-msgstr "建立訊息佇列時失敗"
-
-#: sys-utils/ipcmk.c:147
-#, c-format
-msgid "Message queue id: %d\n"
-msgstr "訊息佇列識別號：%d\n"
+msgid "write same max bytes"
+msgstr "捨棄最大位元組"
-#: sys-utils/ipcmk.c:153
-msgid "create semaphore failed"
-msgstr "建立號誌時失敗"
+#: misc-utils/lsblk.c:231
+#, fuzzy
+msgid "unique storage identifier"
+msgstr "唯一貯藏體識別碼"
-#: sys-utils/ipcmk.c:155
-#, c-format
-msgid "Semaphore id: %d\n"
-msgstr "號誌識別號：%d\n"
+#: misc-utils/lsblk.c:232
+msgid "zone model"
+msgstr ""
-#: sys-utils/ipcrm.c:53
+#: misc-utils/lsblk.c:233
#, fuzzy
-msgid " -m, --shmem-id <id> remove shared memory segment by shmid\n"
-msgstr " -m, --shmem-id <id> 移除共用記憶體資料段由 shmid\n"
+msgid "zone size"
+msgstr "最大常駐設定大小"
-#: sys-utils/ipcrm.c:54
+#: misc-utils/lsblk.c:234
#, fuzzy
-msgid " -M, --shmem-key <key> remove shared memory segment by key\n"
-msgstr " -M, --shmem-key <key> 移除共用記憶體資料段由鍵\n"
+msgid "zone write granularity"
+msgstr "捨棄顆粒性"
-#: sys-utils/ipcrm.c:55
+#: misc-utils/lsblk.c:235
#, fuzzy
-msgid " -q, --queue-id <id> remove message queue by id\n"
-msgstr " -q, --queue-id <id> 移除訊息佇列由識別號\n"
+msgid "zone append max bytes"
+msgstr "捨棄最大位元組"
-#: sys-utils/ipcrm.c:56
+#: misc-utils/lsblk.c:236
#, fuzzy
-msgid " -Q, --queue-key <key> remove message queue by key\n"
-msgstr " -Q, --queue-key <key> 移除訊息佇列由鍵\n"
+msgid "number of zones"
+msgstr "磁區數量"
-#: sys-utils/ipcrm.c:57
+#: misc-utils/lsblk.c:237
#, fuzzy
-msgid " -s, --semaphore-id <id> remove semaphore by id\n"
-msgstr " -s, --semaphore-id <id> 移除號誌由識別號\n"
+msgid "maximum number of open zones"
+msgstr "最大開啟檔案數量"
-#: sys-utils/ipcrm.c:58
+#: misc-utils/lsblk.c:238
#, fuzzy
-msgid " -S, --semaphore-key <key> remove semaphore by key\n"
-msgstr " -S, --semaphore-key <key> 移除號誌由鍵\n"
+msgid "maximum number of active zones"
+msgstr "最大行程數量"
-#: sys-utils/ipcrm.c:59
+#: misc-utils/lsblk.c:1433
#, fuzzy
-msgid " -a, --all[=<shm|msg|sem>] remove all\n"
-msgstr " -a, --all [=<shm|msg|sem>] 全部移除\n"
+msgid "failed to allocate device"
+msgstr "配置迭代器時失敗"
-#: sys-utils/ipcrm.c:60
+#: misc-utils/lsblk.c:1493
#, fuzzy
-msgid " -v, --verbose explain what is being done\n"
-msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+msgid "failed to open device directory in sysfs"
+msgstr "開啟裝置目錄在中 sysfs 時失敗"
-#: sys-utils/ipcrm.c:80
+#: misc-utils/lsblk.c:1681
#, fuzzy, c-format
-msgid "removing shared memory segment id `%d'\n"
-msgstr "移除共用記憶體資料段識別號『%d』\n"
+msgid "%s: failed to get sysfs name"
+msgstr "%s：無法提取 dm 名稱"
-#: sys-utils/ipcrm.c:85
+#: misc-utils/lsblk.c:1693
#, fuzzy, c-format
-msgid "removing message queue id `%d'\n"
-msgstr "移除訊息佇列識別號『%d』\n"
+msgid "%s: failed to get whole-disk device number"
+msgstr "%s：無法提取 whole-disk 裝置編號"
-#: sys-utils/ipcrm.c:90
-#, fuzzy, c-format
-msgid "removing semaphore id `%d'\n"
-msgstr "移除號誌識別號『%d』\n"
+#: misc-utils/lsblk.c:1766 misc-utils/lsblk.c:1814
+#, fuzzy
+msgid "failed to allocate /sys handler"
+msgstr "配置迭代器時失敗"
-#: sys-utils/ipcrm.c:102 sys-utils/ipcrm.c:216
-msgid "permission denied for key"
-msgstr "權限被拒用於鍵值"
+#: misc-utils/lsblk.c:1874 misc-utils/lsblk.c:1876 misc-utils/lsblk.c:1905
+#: misc-utils/lsblk.c:1907
+#, fuzzy, c-format
+msgid "failed to parse list '%s'"
+msgstr "剖析清單『%s 時失敗』"
-#: sys-utils/ipcrm.c:102
-msgid "permission denied for id"
-msgstr "權限被拒用於識別號"
-
-#: sys-utils/ipcrm.c:105 sys-utils/ipcrm.c:222
-msgid "invalid key"
-msgstr "無效的鍵值"
-
-#: sys-utils/ipcrm.c:105
-msgid "invalid id"
-msgstr "無效的識別號"
+#. TRANSLATORS: The standard value for %d is 256.
+#: misc-utils/lsblk.c:1881
+#, fuzzy, c-format
+msgid "the list of excluded devices is too large (limit is %d devices)"
+msgstr "排除的裝置清單的太大 (限制是 %d 裝置)"
-#: sys-utils/ipcrm.c:108 sys-utils/ipcrm.c:219
-msgid "already removed key"
-msgstr "已經移除的鍵值"
+#. TRANSLATORS: The standard value for %d is 256.
+#: misc-utils/lsblk.c:1912
+#, fuzzy, c-format
+msgid "the list of included devices is too large (limit is %d devices)"
+msgstr "包含的裝置清單的太大 (限制是 %d 裝置)"
-#: sys-utils/ipcrm.c:108
-msgid "already removed id"
-msgstr "已經移除的識別號"
+#: misc-utils/lsblk.c:1981 sys-utils/wdctl.c:225
+#, fuzzy, c-format
+msgid " %s [options] [<device> ...]\n"
+msgstr " %s [選項] [<device>...]\n"
-#: sys-utils/ipcrm.c:111 sys-utils/ipcrm.c:225
+#: misc-utils/lsblk.c:1984
#, fuzzy
-msgid "key failed"
-msgstr "鍵失敗"
+msgid "List information about block devices.\n"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/ipcrm.c:111
+#: misc-utils/lsblk.c:1987
#, fuzzy
-msgid "id failed"
-msgstr "識別號失敗"
+msgid " -A, --noempty don't print empty devices\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/ipcrm.c:128
-#, fuzzy, c-format
-msgid "invalid id: %s"
-msgstr "無效的識別號：%s"
+#: misc-utils/lsblk.c:1988
+msgid " -D, --discard print discard capabilities\n"
+msgstr ""
-#: sys-utils/ipcrm.c:161
-#, c-format
-msgid "resource(s) deleted\n"
-msgstr "資源已刪除\n"
+#: misc-utils/lsblk.c:1989
+#, fuzzy
+msgid " -E, --dedup <column> de-duplicate output by <column>\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/ipcrm.c:194
-#, fuzzy, c-format
-msgid "illegal key (%s)"
-msgstr "不合法的鍵 (%s)"
+#: misc-utils/lsblk.c:1990
+msgid " -I, --include <list> show only devices with specified major numbers\n"
+msgstr ""
-#: sys-utils/ipcrm.c:252
+#: misc-utils/lsblk.c:1991 sys-utils/lsirq.c:63 sys-utils/lsmem.c:525
#, fuzzy
-msgid "kernel not configured for shared memory"
-msgstr "內核無法已組配用於共用記憶體"
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/ipcrm.c:265
+#: misc-utils/lsblk.c:1992
#, fuzzy
-msgid "kernel not configured for semaphores"
-msgstr "內核無法已組配用於號誌"
+msgid " -M, --merge group parents of sub-trees (usable for RAIDs, Multi-path)\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/ipcrm.c:279
+#: misc-utils/lsblk.c:1993
#, fuzzy
-msgid "kernel not configured for message queues"
-msgstr "內核無法已組配用於訊息佇列"
-
-#: sys-utils/ipcrm.c:381 sys-utils/ipcrm.c:405
-#, fuzzy, c-format
-msgid "unknown argument: %s"
-msgstr "不明引數：%s"
+msgid " -O, --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/ipcs.c:56
+#: misc-utils/lsblk.c:1995
#, fuzzy
-msgid " -i, --id <id> print details on resource identified by id\n"
-msgstr " -i, --id <id> 列印細節於資源識別的由識別號\n"
+msgid " -S, --scsi output info about SCSI devices\n"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: sys-utils/ipcs.c:60
+#: misc-utils/lsblk.c:1996
#, fuzzy
-msgid "Resource options:\n"
-msgstr "資源選項：\n"
+msgid " -N, --nvme output info about NVMe devices\n"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: sys-utils/ipcs.c:61
+#: misc-utils/lsblk.c:1997
#, fuzzy
-msgid " -m, --shmems shared memory segments\n"
-msgstr " -m, --shmems 共用記憶體資料段\n"
+msgid " -v, --virtio output info about virtio devices\n"
+msgstr " -V 輸出版本資訊然後離開\n"
-#: sys-utils/ipcs.c:62
+#: misc-utils/lsblk.c:1998
#, fuzzy
-msgid " -q, --queues message queues\n"
-msgstr " -q, --queues 訊息佇列\n"
+msgid " -T, --tree[=<column>] use tree format output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/ipcs.c:63
+#: misc-utils/lsblk.c:1999
#, fuzzy
-msgid " -s, --semaphores semaphores\n"
-msgstr " -s, --semaphores 號誌\n"
+msgid " -a, --all print all devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/ipcs.c:64
+#: misc-utils/lsblk.c:2001
#, fuzzy
-msgid " -a, --all all (default)\n"
-msgstr " -a, --all 所有 (預設)\n"
+msgid " -d, --nodeps don't print slaves or holders\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: misc-utils/lsblk.c:2002
+msgid " -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
+msgstr ""
-#: sys-utils/ipcs.c:66
+#: misc-utils/lsblk.c:2003
#, fuzzy
-msgid "Output format:\n"
-msgstr "輸出格式：\n"
+msgid " -f, --fs output info about filesystems\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/ipcs.c:67
+#: misc-utils/lsblk.c:2004
#, fuzzy
-msgid " -t, --time show attach, detach and change times\n"
-msgstr " -t, --time 顯示附加、卸離和變更次\n"
+msgid " -i, --ascii use ascii characters only\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
-#: sys-utils/ipcs.c:68
+#: misc-utils/lsblk.c:2005
#, fuzzy
-msgid " -p, --pid show creator and last operations PIDs\n"
-msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+msgid " -l, --list use list format output\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/ipcs.c:69
+#: misc-utils/lsblk.c:2006
#, fuzzy
-msgid " -c, --creator show creator and owner\n"
-msgstr " -c, --creator 顯示建立者和擁有者\n"
+msgid " -m, --perms output info about permissions\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/ipcs.c:70
+#: misc-utils/lsblk.c:2007 sys-utils/lsirq.c:65 sys-utils/lsmem.c:529
+msgid " -n, --noheadings don't print headings\n"
+msgstr ""
+
+#: misc-utils/lsblk.c:2008 sys-utils/lsmem.c:530
+msgid " -o, --output <list> output columns\n"
+msgstr ""
+
+#: misc-utils/lsblk.c:2009
#, fuzzy
-msgid " -l, --limits show resource limits\n"
-msgstr " -l, --limits 顯示資源限度\n"
+msgid " -p, --paths print complete device path\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/ipcs.c:71
+#: misc-utils/lsblk.c:2011
#, fuzzy
-msgid " -u, --summary show status summary\n"
-msgstr " -u, --summary 顯示狀態概要\n"
+msgid " -s, --inverse inverse dependencies\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/ipcs.c:72
-msgid " --human show sizes in human readable format\n"
+#: misc-utils/lsblk.c:2012
+msgid " -t, --topology output info about topology\n"
msgstr ""
-#: sys-utils/ipcs.c:73
+#: misc-utils/lsblk.c:2013
#, fuzzy
-msgid " -b, --bytes show sizes in bytes\n"
-msgstr " -l, --limits 顯示資源限度\n"
+msgid " -w, --width <num> specifies output width as number of characters\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/ipcs.c:158
-msgid "when using an ID, a single resource must be specified"
+#: misc-utils/lsblk.c:2014
+msgid " -x, --sort <column> sort output by <column>\n"
msgstr ""
-#: sys-utils/ipcs.c:196
-#, c-format
-msgid "------ Shared Memory Limits --------\n"
-msgstr "------ 共用記憶體限度 --------\n"
+#: misc-utils/lsblk.c:2015
+msgid " -y, --shell use column names to be usable as shell variable identifiers\n"
+msgstr ""
-#: sys-utils/ipcs.c:199
-#, fuzzy, c-format
-msgid "max number of segments = %ju\n"
-msgstr "最大資料段數量 = %lu\n"
+#: misc-utils/lsblk.c:2016
+#, fuzzy
+msgid " -z, --zoned print zone related information\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/ipcs.c:201
+#: misc-utils/lsblk.c:2017
#, fuzzy
-msgid "max seg size"
-msgstr "最大檔案大小"
+msgid " --sysroot <dir> use specified directory as system root\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: misc-utils/lsblk.c:2034
+#, fuzzy, c-format
+msgid "failed to access sysfs directory: %s"
+msgstr "存取 sysfs 目錄時失敗：%s"
-#: sys-utils/ipcs.c:203
+#: misc-utils/lsblk.c:2280
#, fuzzy
-msgid "max total shared memory"
-msgstr "最大共用記憶體 (千位元組) = %llu\n"
+msgid "invalid output width number argument"
+msgstr "無效的埠號引數"
-#: sys-utils/ipcs.c:206
+#: misc-utils/lsblk.c:2439
#, fuzzy
-msgid "min seg size"
-msgstr "最大常駐設定大小"
+msgid "failed to allocate device tree"
+msgstr "配置迭代器時失敗"
-#: sys-utils/ipcs.c:216
-#, c-format
-msgid "kernel not configured for shared memory\n"
-msgstr "內核未組配支援共用記憶體\n"
+#: misc-utils/lsfd.c:125
+msgid "class of anonymous inode"
+msgstr ""
-#: sys-utils/ipcs.c:220
-#, c-format
-msgid "------ Shared Memory Status --------\n"
-msgstr "------ 共用記憶體狀態 --------\n"
+#: misc-utils/lsfd.c:128
+#, fuzzy
+msgid "association between file and process"
+msgstr "無法建立子行程"
-#: sys-utils/ipcs.c:232
-#, fuzzy, c-format
-msgid ""
-"segments allocated %d\n"
-"pages allocated %ld\n"
-"pages resident %ld\n"
-"pages swapped %ld\n"
-"Swap performance: %ld attempts\t %ld successes\n"
+#: misc-utils/lsfd.c:131
+msgid "block device driver name resolved by /proc/devices"
msgstr ""
-"資料段配置 %d\n"
-"頁面配置 %ld\n"
-"頁面常駐 %ld\n"
-"頁面交換 %ld\n"
-"交換效能：%ld 試圖\t %ld 成功\n"
-#: sys-utils/ipcs.c:249
-#, c-format
-msgid "------ Shared Memory Segment Creators/Owners --------\n"
-msgstr "------ 共用記憶體資料段建立者/擁有者 --------\n"
+#: misc-utils/lsfd.c:134
+msgid "character device driver name resolved by /proc/devices"
+msgstr ""
-#: sys-utils/ipcs.c:251 sys-utils/ipcs.c:257 sys-utils/ipcs.c:264
-#: sys-utils/ipcs.c:270
-msgid "shmid"
-msgstr "shmid"
+#: misc-utils/lsfd.c:137
+#, fuzzy
+msgid "command of the process opening the file"
+msgstr "命令的處理保有鎖定"
-#: sys-utils/ipcs.c:251 sys-utils/ipcs.c:270 sys-utils/ipcs.c:374
-#: sys-utils/ipcs.c:389 sys-utils/ipcs.c:473 sys-utils/ipcs.c:491
-msgid "perms"
-msgstr "perms"
+#: misc-utils/lsfd.c:140
+msgid "reachability from the file system"
+msgstr ""
-#: sys-utils/ipcs.c:251 sys-utils/ipcs.c:374 sys-utils/ipcs.c:473
-msgid "cuid"
-msgstr "cuid"
+#: misc-utils/lsfd.c:143
+#, fuzzy
+msgid "ID of device containing file"
+msgstr "裝置識別碼"
-#: sys-utils/ipcs.c:251 sys-utils/ipcs.c:374 sys-utils/ipcs.c:473
-msgid "cgid"
-msgstr "cgid"
+#: misc-utils/lsfd.c:146
+msgid "device type (blk, char, or nodev)"
+msgstr ""
-#: sys-utils/ipcs.c:251 sys-utils/ipcs.c:374 sys-utils/ipcs.c:473
-msgid "uid"
-msgstr "uid"
+#: misc-utils/lsfd.c:149
+msgid "IPC endpoints information communicated with the fd"
+msgstr ""
-#: sys-utils/ipcs.c:251 sys-utils/ipcs.c:374 sys-utils/ipcs.c:473
-msgid "gid"
-msgstr "gid"
+#: misc-utils/lsfd.c:152
+msgid "flags specified when opening the file"
+msgstr ""
-#: sys-utils/ipcs.c:255
-#, c-format
-msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
-msgstr "------ 共用記憶體附加/卸離/變更 次數 --------\n"
+#: misc-utils/lsfd.c:155
+#, fuzzy
+msgid "file descriptor for the file"
+msgstr "旗標描述"
-#: sys-utils/ipcs.c:257 sys-utils/ipcs.c:264 sys-utils/ipcs.c:270
-#: sys-utils/ipcs.c:380 sys-utils/ipcs.c:389 sys-utils/ipcs.c:479
-#: sys-utils/ipcs.c:485 sys-utils/ipcs.c:491
-msgid "owner"
-msgstr "擁有者"
+#: misc-utils/lsfd.c:158
+#, fuzzy
+msgid "user ID number of the file's owner"
+msgstr "最大開啟檔案數量"
-#: sys-utils/ipcs.c:257
-msgid "attached"
-msgstr "已附加"
+#: misc-utils/lsfd.c:161 misc-utils/lslocks.c:79
+#, fuzzy
+msgid "inode number"
+msgstr "邏輯的 NUMA 節點數字"
-#: sys-utils/ipcs.c:257
-msgid "detached"
-msgstr "已卸離"
+#: misc-utils/lsfd.c:164
+msgid "local IP address"
+msgstr ""
-#: sys-utils/ipcs.c:258
-msgid "changed"
-msgstr "已變更"
+#: misc-utils/lsfd.c:167
+msgid "remote IP address"
+msgstr ""
-#: sys-utils/ipcs.c:262
-#, c-format
-msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
-msgstr "------ 共用記憶體建立者/最後操作 PIDs --------\n"
+#: misc-utils/lsfd.c:170
+msgid "local IPv6 address"
+msgstr ""
-#: sys-utils/ipcs.c:264
-msgid "cpid"
-msgstr "cpid"
+#: misc-utils/lsfd.c:173
+msgid "remote IPv6 address"
+msgstr ""
-#: sys-utils/ipcs.c:264
-msgid "lpid"
-msgstr "lpid"
+#: misc-utils/lsfd.c:176
+#, fuzzy
+msgid "name of the file (raw)"
+msgstr "大小的裝置"
-#: sys-utils/ipcs.c:268
-#, c-format
-msgid "------ Shared Memory Segments --------\n"
-msgstr "------ 共用記憶體資料段 --------\n"
+#: misc-utils/lsfd.c:179
+msgid "opened by a kernel thread"
+msgstr ""
-#: sys-utils/ipcs.c:270 sys-utils/ipcs.c:389 sys-utils/ipcs.c:491
-msgid "key"
-msgstr "鍵值"
+#: misc-utils/lsfd.c:182
+msgid "device ID for special, or ID of device containing file"
+msgstr ""
-#: sys-utils/ipcs.c:271 sys-utils/ipcs.c:492
-msgid "size"
+#: misc-utils/lsfd.c:185
+msgid "length of file mapping (in page)"
msgstr ""
-#: sys-utils/ipcs.c:271 sys-utils/prlimit.c:70 sys-utils/prlimit.c:73
-#: sys-utils/prlimit.c:76 sys-utils/prlimit.c:77 sys-utils/prlimit.c:85
-msgid "bytes"
-msgstr "位元組"
+#: misc-utils/lsfd.c:188
+msgid "misc character device name resolved by /proc/misc"
+msgstr ""
-#: sys-utils/ipcs.c:272
-msgid "nattch"
-msgstr "使用數"
+#: misc-utils/lsfd.c:191
+#, fuzzy
+msgid "mount id"
+msgstr "掛載"
-#: sys-utils/ipcs.c:272
-msgid "status"
-msgstr "狀態"
+#: misc-utils/lsfd.c:194
+#, fuzzy
+msgid "access mode (rwx)"
+msgstr "鎖定存取模式"
-#: sys-utils/ipcs.c:296 sys-utils/ipcs.c:298 sys-utils/ipcs.c:300
-#: sys-utils/ipcs.c:412 sys-utils/ipcs.c:414 sys-utils/ipcs.c:516
-#: sys-utils/ipcs.c:518 sys-utils/ipcs.c:520 sys-utils/ipcs.c:574
-#: sys-utils/ipcs.c:576 sys-utils/ipcs.c:605 sys-utils/ipcs.c:607
-#: sys-utils/ipcs.c:609 sys-utils/ipcs.c:633
-msgid "Not set"
-msgstr "未設定"
+#: misc-utils/lsfd.c:197
+#, fuzzy
+msgid "name of the file (cooked)"
+msgstr "大小的裝置"
-#: sys-utils/ipcs.c:326
-msgid "dest"
-msgstr "目標"
+#: misc-utils/lsfd.c:200
+msgid "netlink multicast groups"
+msgstr ""
-#: sys-utils/ipcs.c:327
-msgid "locked"
-msgstr "已鎖定"
+#: misc-utils/lsfd.c:203
+msgid "netlink local port id"
+msgstr ""
-#: sys-utils/ipcs.c:346
-#, c-format
-msgid "------ Semaphore Limits --------\n"
-msgstr "------ 號誌限度 --------\n"
+#: misc-utils/lsfd.c:206
+msgid "netlink protocol"
+msgstr ""
-#: sys-utils/ipcs.c:349
-#, c-format
-msgid "max number of arrays = %d\n"
-msgstr "最大陣列數量 = %d\n"
+#: misc-utils/lsfd.c:209
+#, fuzzy
+#| msgid "ncount"
+msgid "link count"
+msgstr "ncount"
-#: sys-utils/ipcs.c:350
-#, c-format
-msgid "max semaphores per array = %d\n"
-msgstr "各陣列最大號誌 = %d\n"
+#: misc-utils/lsfd.c:212
+msgid "name of the namespace (NS.TYPE:[INODE])"
+msgstr ""
-#: sys-utils/ipcs.c:351
-#, c-format
-msgid "max semaphores system wide = %d\n"
-msgstr "系統整體最大號誌 = %d\n"
-
-#: sys-utils/ipcs.c:352
-#, c-format
-msgid "max ops per semop call = %d\n"
-msgstr "各 semop 呼叫最大 ops = %d\n"
-
-#: sys-utils/ipcs.c:353
-#, c-format
-msgid "semaphore max value = %d\n"
-msgstr "號誌最大值 = %d\n"
-
-#: sys-utils/ipcs.c:362
-#, c-format
-msgid "kernel not configured for semaphores\n"
-msgstr "內核未組配用於號誌\n"
-
-#: sys-utils/ipcs.c:365
-#, c-format
-msgid "------ Semaphore Status --------\n"
-msgstr "------ 號誌狀態 --------\n"
+#: misc-utils/lsfd.c:215
+#, fuzzy
+msgid "type of the namespace"
+msgstr "狀態的裝置"
-#: sys-utils/ipcs.c:366
-#, c-format
-msgid "used arrays = %d\n"
-msgstr "å·²ç\94¨é\99£å\88\97 = %d\n"
+#: misc-utils/lsfd.c:218
+#, fuzzy
+msgid "owner of the file"
+msgstr "大å°\8fç\9a\84è£\9dç½®"
-#: sys-utils/ipcs.c:367
-#, c-format
-msgid "allocated semaphores = %d\n"
-msgstr "已配置號誌 = %d\n"
+#: misc-utils/lsfd.c:221
+msgid "net interface associated with the packet socket"
+msgstr ""
-#: sys-utils/ipcs.c:372
-#, c-format
-msgid "------ Semaphore Arrays Creators/Owners --------\n"
-msgstr "------ 號誌陣列建立者/擁有者 --------\n"
+#: misc-utils/lsfd.c:224
+msgid "L3 protocol associated with the packet socket"
+msgstr ""
-#: sys-utils/ipcs.c:374 sys-utils/ipcs.c:380 sys-utils/ipcs.c:389
-msgid "semid"
-msgstr "semid"
+#: misc-utils/lsfd.c:227
+msgid "block device name resolved by /proc/partition"
+msgstr ""
-#: sys-utils/ipcs.c:378
-#, c-format
-msgid "------ Semaphore Operation/Change Times --------\n"
-msgstr "------ 號誌作業/變更 次數 --------\n"
+#: misc-utils/lsfd.c:230
+#, fuzzy
+msgid "PID of the process opening the file"
+msgstr "PID 的處理保有鎖定"
-#: sys-utils/ipcs.c:380
-msgid "last-op"
-msgstr "最後操作者"
+#: misc-utils/lsfd.c:233
+#, fuzzy
+msgid "command of the process targeted by the pidfd"
+msgstr "命令的處理保有鎖定"
-#: sys-utils/ipcs.c:380
-msgid "last-changed"
-msgstr "最後變更者"
+#: misc-utils/lsfd.c:236
+msgid "NSpid field in fdinfo of the pidfd"
+msgstr ""
-#: sys-utils/ipcs.c:387
-#, c-format
-msgid "------ Semaphore Arrays --------\n"
-msgstr "------ 號誌陣列 --------\n"
+#: misc-utils/lsfd.c:239
+#, fuzzy
+msgid "PID of the process targeted by the pidfd"
+msgstr "PID 的處理保有鎖定"
-#: sys-utils/ipcs.c:389
-msgid "nsems"
-msgstr "nsems"
+#: misc-utils/lsfd.c:242
+msgid "ICMP echo request ID"
+msgstr ""
-#: sys-utils/ipcs.c:448
-#, c-format
-msgid "------ Messages Limits --------\n"
-msgstr "------ 訊息限度 --------\n"
+#: misc-utils/lsfd.c:245
+#, fuzzy
+msgid "file position"
+msgstr "%s：無法刪除分割區"
-#: sys-utils/ipcs.c:449
-#, c-format
-msgid "max queues system wide = %d\n"
-msgstr "系統整體最大佇列 = %d\n"
+#: misc-utils/lsfd.c:248
+#, fuzzy
+msgid "protocol number of the raw socket"
+msgstr "最大行程數量"
-#: sys-utils/ipcs.c:451
+#: misc-utils/lsfd.c:251
#, fuzzy
-msgid "max size of message"
-msgstr "訊息最大尺寸 (位元組)=%d\n"
+msgid "device ID (if special file)"
+msgstr "沒有迴圈裝置指定的"
-#: sys-utils/ipcs.c:453
+#: misc-utils/lsfd.c:254
#, fuzzy
-msgid "default max size of queue"
-msgstr "預設佇列最大尺寸 (位元組)=%d\n"
+msgid "file size"
+msgstr "最大檔案大小"
-#: sys-utils/ipcs.c:460
-#, c-format
-msgid "kernel not configured for message queues\n"
-msgstr "內核未組配用於訊息佇列\n"
+#: misc-utils/lsfd.c:257
+msgid "listening socket"
+msgstr ""
-#: sys-utils/ipcs.c:463
-#, c-format
-msgid "------ Messages Status --------\n"
-msgstr "------ 訊息狀態 --------\n"
+#: misc-utils/lsfd.c:260
+msgid "inode identifying network namespace where the socket belongs to"
+msgstr ""
-#: sys-utils/ipcs.c:464
-#, c-format
-msgid "allocated queues = %d\n"
-msgstr "å·²é\85\8dç½®ä½\87å\88\97 = %d\n"
+#: misc-utils/lsfd.c:263
+#, fuzzy
+msgid "protocol name"
+msgstr "å\88\86å\89²å\90\8d稱"
-#: sys-utils/ipcs.c:465
-#, c-format
-msgid "used headers = %d\n"
-msgstr "已用標頭 = %d\n"
+#: misc-utils/lsfd.c:266
+msgid "State of socket"
+msgstr ""
-#: sys-utils/ipcs.c:466
+#: misc-utils/lsfd.c:269
#, fuzzy
-msgid "used space"
-msgstr "已用空間 = %d 位元組\n"
+#| msgid "socket"
+msgid "Type of socket"
+msgstr "通訊端"
-#: sys-utils/ipcs.c:467
+#: misc-utils/lsfd.c:272
#, fuzzy
-msgid " bytes\n"
-msgstr "位元組"
+msgid "file system, partition, or device containing file"
+msgstr "%s：無法讀取分割表"
-#: sys-utils/ipcs.c:471
-#, c-format
-msgid "------ Message Queues Creators/Owners --------\n"
-msgstr "------ 訊息佇列建立者/擁有者 --------\n"
+#: misc-utils/lsfd.c:275
+#, fuzzy
+msgid "file type (raw)"
+msgstr "檔案系統型態"
-#: sys-utils/ipcs.c:473 sys-utils/ipcs.c:479 sys-utils/ipcs.c:485
-#: sys-utils/ipcs.c:491
-msgid "msqid"
-msgstr "msqid"
+#: misc-utils/lsfd.c:278
+msgid "local TCP address (INET address:TCP port)"
+msgstr ""
-#: sys-utils/ipcs.c:477
-#, c-format
-msgid "------ Message Queues Send/Recv/Change Times --------\n"
-msgstr "------ 訊息佇列發送/接收/變更 次數 --------\n"
+#: misc-utils/lsfd.c:281
+msgid "remote TCP address (INET address:TCP port)"
+msgstr ""
-#: sys-utils/ipcs.c:479
-msgid "send"
-msgstr "發送"
+#: misc-utils/lsfd.c:284
+#, fuzzy
+msgid "local TCP port"
+msgstr "邏輯的 CPU 數字"
-#: sys-utils/ipcs.c:479
-msgid "recv"
-msgstr "接收"
+#: misc-utils/lsfd.c:287
+msgid "remote TCP port"
+msgstr ""
-#: sys-utils/ipcs.c:479
-msgid "change"
-msgstr "變更"
+#: misc-utils/lsfd.c:290
+#, fuzzy
+msgid "thread ID of the process opening the file"
+msgstr "PID 的處理保有鎖定"
-#: sys-utils/ipcs.c:483
-#, c-format
-msgid "------ Message Queues PIDs --------\n"
-msgstr "------ 訊息佇列 PIDs --------\n"
+#: misc-utils/lsfd.c:293
+#, fuzzy
+msgid "file type (cooked)"
+msgstr "檔案系統型態"
-#: sys-utils/ipcs.c:485
-msgid "lspid"
-msgstr "lspid"
+#: misc-utils/lsfd.c:296
+msgid "local UDP address (INET address:UDP port)"
+msgstr ""
-#: sys-utils/ipcs.c:485
-msgid "lrpid"
-msgstr "lrpid"
+#: misc-utils/lsfd.c:299
+msgid "remote UDP address (INET address:UDP port)"
+msgstr ""
-#: sys-utils/ipcs.c:489
-#, c-format
-msgid "------ Message Queues --------\n"
-msgstr "------ 訊息佇列 --------\n"
+#: misc-utils/lsfd.c:302
+msgid "local UDP port"
+msgstr ""
-#: sys-utils/ipcs.c:492
-msgid "used-bytes"
-msgstr "已用位元組"
+#: misc-utils/lsfd.c:305
+msgid "remote UDP port"
+msgstr ""
-#: sys-utils/ipcs.c:493
-msgid "messages"
-msgstr "訊息"
+#: misc-utils/lsfd.c:308
+msgid "local UDPLite address (INET address:UDPLite port)"
+msgstr ""
-#: sys-utils/ipcs.c:558 sys-utils/ipcs.c:588 sys-utils/ipcs.c:621
-#, fuzzy, c-format
-msgid "id %d not found"
-msgstr "%s：找不到"
+#: misc-utils/lsfd.c:311
+msgid "remote UDPLite address (INET address:UDPLite port)"
+msgstr ""
-#: sys-utils/ipcs.c:562
-#, c-format
-msgid ""
-"\n"
-"Shared memory Segment shmid=%d\n"
+#: misc-utils/lsfd.c:314
+msgid "local UDPLite port"
msgstr ""
-"\n"
-"共用記憶體資料段 shmid = %d\n"
-#: sys-utils/ipcs.c:563
-#, fuzzy, c-format
-msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
-msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
+#: misc-utils/lsfd.c:317
+msgid "remote UDPLite port"
+msgstr ""
-#: sys-utils/ipcs.c:566
-#, c-format
-msgid "mode=%#o\taccess_perms=%#o\n"
-msgstr "mode=%#o\taccess_perms=%#o\n"
+#: misc-utils/lsfd.c:320
+#, fuzzy
+msgid "user ID number of the process"
+msgstr "最大行程數量"
-#: sys-utils/ipcs.c:568
-msgid "size="
+#: misc-utils/lsfd.c:323
+msgid "filesystem pathname for UNIX domain socket"
msgstr ""
-#: sys-utils/ipcs.c:568
+#: misc-utils/lsfd.c:326
#, fuzzy
-msgid "bytes="
-msgstr "位元組"
+msgid "user of the process"
+msgstr "最大行程數量"
-#: sys-utils/ipcs.c:570
-#, fuzzy, c-format
-msgid "lpid=%u\tcpid=%u\tnattch=%jd\n"
-msgstr "位元組=%lu\tlpid=%d\tcpid=%d\tnattch=%ld\n"
+#: misc-utils/lsfd.c:370 sys-utils/prlimit.c:87
+#, fuzzy
+msgid "processes"
+msgstr "處理識別號"
-#: sys-utils/ipcs.c:573
-#, c-format
-msgid "att_time=%-26.24s\n"
-msgstr "att_time=%-26.24s\n"
+#: misc-utils/lsfd.c:374
+#, fuzzy
+msgid "root owned processes"
+msgstr "%s：找不到行程「%s」\n"
-#: sys-utils/ipcs.c:575
-#, c-format
-msgid "det_time=%-26.24s\n"
-msgstr "det_time=%-26.24s\n"
+#: misc-utils/lsfd.c:378
+#, fuzzy
+msgid "kernel threads"
+msgstr "內核訊息"
-#: sys-utils/ipcs.c:577 sys-utils/ipcs.c:608
-#, c-format
-msgid "change_time=%-26.24s\n"
-msgstr "change_time=%-26.24s\n"
+#: misc-utils/lsfd.c:382
+#, fuzzy
+msgid "open files"
+msgstr "openpty 失敗"
-#: sys-utils/ipcs.c:592
-#, c-format
-msgid ""
-"\n"
-"Message Queue msqid=%d\n"
+#: misc-utils/lsfd.c:386
+#, fuzzy
+msgid "RO open files"
+msgstr "openpty 失敗"
+
+#: misc-utils/lsfd.c:390
+#, fuzzy
+msgid "WO open files"
+msgstr "openpty 失敗"
+
+#: misc-utils/lsfd.c:394
+msgid "shared mappings"
msgstr ""
-"\n"
-"訊息佇列 msqid=%d\n"
-#: sys-utils/ipcs.c:593
-#, fuzzy, c-format
-msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
-msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\t模式=%#o\n"
+#: misc-utils/lsfd.c:398
+msgid "RO shared mappings"
+msgstr ""
-#: sys-utils/ipcs.c:597
-msgid "csize="
+#: misc-utils/lsfd.c:402
+msgid "WO shared mappings"
msgstr ""
-#: sys-utils/ipcs.c:597
+#: misc-utils/lsfd.c:406
+msgid "regular files"
+msgstr ""
+
+#: misc-utils/lsfd.c:410
#, fuzzy
-msgid "cbytes="
-msgstr "位元組"
+#| msgid "Sectors"
+msgid "directories"
+msgstr "磁區"
-#: sys-utils/ipcs.c:599
-msgid "qsize="
+#: misc-utils/lsfd.c:414
+#, fuzzy
+#| msgid "socket"
+msgid "sockets"
+msgstr "通訊端"
+
+#: misc-utils/lsfd.c:418
+msgid "fifos/pipes"
msgstr ""
-#: sys-utils/ipcs.c:599
+#: misc-utils/lsfd.c:422
#, fuzzy
-msgid "qbytes="
-msgstr "位元組"
+#| msgid "/dev/%s: not a character device"
+msgid "character devices"
+msgstr "/dev/%s: 不是字元裝置"
-#: sys-utils/ipcs.c:604
-#, c-format
-msgid "send_time=%-26.24s\n"
-msgstr "send_time =%-26.24s\n"
+#: misc-utils/lsfd.c:426
+#, fuzzy
+msgid "block devices"
+msgstr "區塊裝置 "
-#: sys-utils/ipcs.c:606
-#, c-format
-msgid "rcv_time=%-26.24s\n"
-msgstr "rcv_time=%-26.24s\n"
+#: misc-utils/lsfd.c:430
+#, fuzzy
+msgid "unknown types"
+msgstr "不明使用者 %s"
-#: sys-utils/ipcs.c:625
-#, c-format
-msgid ""
-"\n"
-"Semaphore Array semid=%d\n"
+#: misc-utils/lsfd.c:526
+msgid "too many columns are added via filter expression"
msgstr ""
-"\n"
-"號誌陣列 semid=%d\n"
-#: sys-utils/ipcs.c:626
-#, fuzzy, c-format
-msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
-msgstr "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
+#: misc-utils/lsfd.c:1323
+#, fuzzy
+msgid "failed to allocate an idcache"
+msgstr "配置迭代器時失敗"
-#: sys-utils/ipcs.c:629
-#, c-format
-msgid "mode=%#o, access_perms=%#o\n"
-msgstr "模式=%#o, access_perms=%#o\n"
+#: misc-utils/lsfd.c:1378 misc-utils/lslocks.c:292
+#, fuzzy
+msgid "(unknown)"
+msgstr "(不明)"
+
+#: misc-utils/lsfd.c:1434 misc-utils/lsfd-filter.c:374
+#: misc-utils/lsfd-sock-xinfo.c:152 misc-utils/lsfd-sock-xinfo.c:279
+#, fuzzy
+msgid "failed to allocate memory"
+msgstr "配置記憶體時失敗：%m"
-#: sys-utils/ipcs.c:631
+#: misc-utils/lsfd.c:1465
#, fuzzy, c-format
-msgid "nsems = %ju\n"
-msgstr "nsems = %ld\n"
+msgid "unexpected value for pid specification: %s"
+msgstr "未預期的檔案結束於 %s"
-#: sys-utils/ipcs.c:632
+#: misc-utils/lsfd.c:1467
#, c-format
-msgid "otime = %-26.24s\n"
-msgstr "otime = %-26.24s\n"
+msgid "garbage at the end of pid specification: %s"
+msgstr ""
-#: sys-utils/ipcs.c:634
+#: misc-utils/lsfd.c:1469
#, c-format
-msgid "ctime = %-26.24s\n"
-msgstr "ctime = %-26.24s\n"
-
-#: sys-utils/ipcs.c:637
-msgid "semnum"
-msgstr "semnum"
-
-#: sys-utils/ipcs.c:637
-msgid "value"
-msgstr "值"
-
-#: sys-utils/ipcs.c:637
-msgid "ncount"
-msgstr "ncount"
-
-#: sys-utils/ipcs.c:637
-msgid "zcount"
-msgstr "zcount"
-
-#: sys-utils/ipcs.c:637
-msgid "pid"
-msgstr "pid"
-
-#: sys-utils/ipcutils.c:231 sys-utils/ipcutils.c:235 sys-utils/ipcutils.c:239
-#: sys-utils/ipcutils.c:243
-#, fuzzy, c-format
-msgid "%s failed"
-msgstr "%s 失敗。\n"
-
-#: sys-utils/ipcutils.c:521
-#, fuzzy, c-format
-msgid "%s (bytes) = "
-msgstr "%zd 位元組 ["
-
-#: sys-utils/ipcutils.c:523
-#, fuzzy, c-format
-msgid "%s (kbytes) = "
-msgstr "%zd 位元組 ["
-
-#: sys-utils/ldattach.c:143
-#, fuzzy
-msgid "invalid iflag"
-msgstr "無效的 iflag"
-
-#: sys-utils/ldattach.c:159
-#, fuzzy, c-format
-msgid " %s [options] <ldisc> <device>\n"
-msgstr " %s [選項] <ldisc><裝置>\n"
+msgid "out of range value for pid specification: %ld"
+msgstr ""
-#: sys-utils/ldattach.c:162
+#: misc-utils/lsfd.c:1513
#, fuzzy
-msgid " -d, --debug print verbose messages to stderr\n"
-msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+msgid "failed to alloc procfs handler"
+msgstr "配置迭代器時失敗"
-#: sys-utils/ldattach.c:163
+#: misc-utils/lsfd.c:1517
#, fuzzy
-msgid " -s, --speed <value> set serial line speed\n"
-msgstr " -s, --speed <value> 設定序列線路速度\n"
+msgid "failed to open /proc"
+msgstr "%s：開啟失敗：%s\n"
-#: sys-utils/ldattach.c:164
+#: misc-utils/lsfd.c:1541
#, fuzzy
-msgid " -7, --sevenbits set character size to 7 bits\n"
-msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+msgid " -l, --threads list in threads level\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/ldattach.c:165
+#: misc-utils/lsfd.c:1542
#, fuzzy
-msgid " -8, --eightbits set character size to 8 bits\n"
-msgstr " -8, --eightbits 設定字元大小到 8 位元\n"
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/ldattach.c:166
+#: misc-utils/lsfd.c:1543
#, fuzzy
-msgid " -n, --noparity set parity to none\n"
-msgstr " -n, --noparity 設定同位到無\n"
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/ldattach.c:167
+#: misc-utils/lsfd.c:1544
#, fuzzy
-msgid " -e, --evenparity set parity to even\n"
-msgstr " -e, --evenparity 設定同位到甚至\n"
+msgid " -o, --output <list> output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/ldattach.c:168
+#: misc-utils/lsfd.c:1545
#, fuzzy
-msgid " -o, --oddparity set parity to odd\n"
-msgstr " -o, --oddparity 設定同位到奇數\n"
+msgid " -r, --raw use raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/ldattach.c:169
+#: misc-utils/lsfd.c:1546
#, fuzzy
-msgid " -1, --onestopbit set stop bits to one\n"
-msgstr " -1, --onestopbit 設定停止位元到一個\n"
+msgid " -u, --notruncate don't truncate text in columns\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/ldattach.c:170
+#: misc-utils/lsfd.c:1547
#, fuzzy
-msgid " -2, --twostopbits set stop bits to two\n"
-msgstr " -2, --twostopbits 設定停止位元到兩\n"
+msgid " -p, --pid <pid(s)> collect information only specified processes\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/ldattach.c:171
-#, fuzzy
-msgid " -i, --iflag [-]<iflag> set input mode flag\n"
-msgstr " -i, --iflag [-]<iflag> 設定輸入模式旗標\n"
+#: misc-utils/lsfd.c:1548
+msgid " -i[4|6], --inet[=4|6] list only IPv4 and/or IPv6 sockets\n"
+msgstr ""
-#: sys-utils/ldattach.c:176
-msgid ""
-"\n"
-"Known <ldisc> names:\n"
+#: misc-utils/lsfd.c:1549
+msgid " -Q, --filter <expr> apply display filter\n"
msgstr ""
-"\n"
-"已知 <ldisc> 名稱：\n"
-#: sys-utils/ldattach.c:178
-msgid ""
-"\n"
-"Known <iflag> names:\n"
+#: misc-utils/lsfd.c:1550
+msgid " --debug-filter dump the internal data structure of filter and exit\n"
msgstr ""
-"\n"
-"已知 <iflag> 名稱：\n"
-#: sys-utils/ldattach.c:263
+#: misc-utils/lsfd.c:1551
#, fuzzy
-msgid "invalid speed argument"
-msgstr "無效的速度引數"
+msgid ""
+" -C, --counter <name>:<expr>\n"
+" define custom counter for --summary output\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
-#: sys-utils/ldattach.c:274
-msgid "invalid option"
-msgstr "無效的選項"
+#: misc-utils/lsfd.c:1553
+msgid " --dump-counters dump counter definitions\n"
+msgstr ""
-#: sys-utils/ldattach.c:285
-#, fuzzy
-msgid "invalid line discipline argument"
-msgstr "無效的列規律引數"
+#: misc-utils/lsfd.c:1554
+msgid " --summary[=<when>] print summary information (only, append, or never)\n"
+msgstr ""
-#: sys-utils/ldattach.c:292
+#: misc-utils/lsfd.c:1621
#, c-format
-msgid "%s is not a serial line"
-msgstr "%s 並非序列線路"
+msgid "too short counter specification: -C/--counter %s"
+msgstr ""
-#: sys-utils/ldattach.c:299
+#: misc-utils/lsfd.c:1625 misc-utils/lsfd.c:1631
#, c-format
-msgid "cannot get terminal attributes for %s"
-msgstr "無法取得終端機屬性用於 %s"
+msgid "no name for counter: -C/--counter %s"
+msgstr ""
-#: sys-utils/ldattach.c:302
+#: misc-utils/lsfd.c:1635
#, c-format
-msgid "speed %d unsupported"
-msgstr "速度 %d 不受支援"
+msgid "empty counter expression given: -C/--counter %s"
+msgstr ""
-#: sys-utils/ldattach.c:351
+#: misc-utils/lsfd.c:1643
#, c-format
-msgid "cannot set terminal attributes for %s"
-msgstr "無法設定終端機屬性用於 %s"
+msgid "don't use `{' in the name of a counter: %s"
+msgstr ""
-#: sys-utils/ldattach.c:358
-msgid "cannot set line discipline"
-msgstr "無法設定線路規律"
+#: misc-utils/lsfd.c:1664
+msgid "failed in making filter for a counter: "
+msgstr ""
-#: sys-utils/ldattach.c:364
-msgid "cannot daemonize"
-msgstr "無法守護程式化"
+#: misc-utils/lsfd.c:1732
+#, fuzzy
+msgid "failed to allocate summary table"
+msgstr "初始化輸出表格時失敗"
-#: sys-utils/losetup.c:61
-msgid "autoclear flag set"
+#: misc-utils/lsfd.c:1742
+msgid "VALUE"
msgstr ""
-#: sys-utils/losetup.c:62
+#: misc-utils/lsfd.c:1744 misc-utils/lsfd.c:1750
#, fuzzy
-msgid "device backing file"
-msgstr "裝置識別碼"
+msgid "failed to allocate summary column"
+msgstr "callocate cpu 集合時失敗"
+
+#: misc-utils/lsfd.c:1748
+msgid "COUNTER"
+msgstr ""
-#: sys-utils/losetup.c:63
+#: misc-utils/lsfd.c:1763 misc-utils/lsfd.c:1765 misc-utils/lsfd.c:1768
#, fuzzy
-msgid "backing file inode number"
-msgstr "邏輯的 NUMA 節點數字"
+msgid "failed to add summary data"
+msgstr "加入輸出列時失敗"
+
+#: misc-utils/lsfd.c:1905
+#, fuzzy, c-format
+msgid "unknown -i/--inet argument: %s"
+msgstr "不明引數：%s"
-#: sys-utils/losetup.c:64
+#: misc-utils/lsfd.c:1931 sys-utils/lsmem.c:641
#, fuzzy
-msgid "backing file major:minor device number"
-msgstr "主è¦\81ç\9a\84ï¼\9a次ç´\9aè£\9dç½®æ\95¸å\97"
+msgid "unsupported --summary argument"
+msgstr "ä¸\8då\8f\97æ\94¯æ\8f´ç\9a\84å¼\95æ\95¸ï¼\9a%s"
-#: sys-utils/losetup.c:65
+#: misc-utils/lsfd-file.c:311 misc-utils/namei.c:455 sys-utils/lsns.c:1486
#, fuzzy
-msgid "loop device name"
-msgstr "裝置名稱"
+msgid "failed to allocate UID cache"
+msgstr "配置迭代器時失敗"
-#: sys-utils/losetup.c:66
-msgid "offset from the beginning"
+#: misc-utils/lsfd-filter.c:417
+#, c-format
+msgid "error: string literal is not terminated: %s"
msgstr ""
-#: sys-utils/losetup.c:67
-#, fuzzy
-msgid "partscan flag set"
-msgstr "分割旗標"
-
-#: sys-utils/losetup.c:69
-#, fuzzy
-msgid "size limit of the file in bytes"
-msgstr "提取對齊偏移在中位元組"
+#: misc-utils/lsfd-filter.c:511
+#, c-format
+msgid "error: unbalanced parenthesis: %s"
+msgstr ""
-#: sys-utils/losetup.c:70
-#, fuzzy
-msgid "loop device major:minor number"
-msgstr "主要的：次級裝置數字"
+#: misc-utils/lsfd-filter.c:560 misc-utils/lsfd-filter.c:570
+#: misc-utils/lsfd-filter.c:580
+#, fuzzy, c-format
+msgid "error: unexpected character %c after ="
+msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
-#: sys-utils/losetup.c:130 sys-utils/losetup.c:142
+#: misc-utils/lsfd-filter.c:641
#, fuzzy, c-format
-msgid ", offset %ju"
-msgstr "，偏移 %ju"
+msgid "error: failed to convert input to number"
+msgstr "%s：無法提取分割區編號"
-#: sys-utils/losetup.c:133 sys-utils/losetup.c:145
+#: misc-utils/lsfd-filter.c:645
#, fuzzy, c-format
-msgid ", sizelimit %ju"
-msgstr "，sizelimit %ju"
+msgid "error: unexpected character %c"
+msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
-#: sys-utils/losetup.c:153
+#: misc-utils/lsfd-filter.c:700
#, fuzzy, c-format
-msgid ", encryption %s (type %u)"
-msgstr "，加密 %s (型態 %u)"
+msgid "error: unexpected token: %s after %s"
+msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
-#: sys-utils/losetup.c:195
+#: misc-utils/lsfd-filter.c:711
+#, c-format
+msgid "error: empty left side expression: %s"
+msgstr ""
+
+#: misc-utils/lsfd-filter.c:726
#, fuzzy, c-format
-msgid "%s: detach failed"
-msgstr "%s：卸離失敗"
+#| msgid "error: cannot open %s"
+msgid "error: no such column: %s"
+msgstr "錯誤：無法開啟 %s"
-#: sys-utils/losetup.c:366
+#: misc-utils/lsfd-filter.c:737
#, fuzzy, c-format
-msgid ""
-" %1$s [options] [<loopdev>]\n"
-" %1$s [options] -f | <loopdev> <file>\n"
-msgstr ""
-" %1$s [選項] [<loopdev>]\n"
-" %1$s [選項] -f|<loopdev><檔案>\n"
+#| msgid "error: cannot open %s"
+msgid "error: cannot add a column to table: %s"
+msgstr "錯誤：無法開啟 %s"
-#: sys-utils/losetup.c:371
-#, fuzzy
-msgid ""
-" -a, --all list all used devices\n"
-" -d, --detach <loopdev> [...] detach one or more devices\n"
-" -D, --detach-all detach all used devices\n"
-" -f, --find find first unused device\n"
-" -c, --set-capacity <loopdev> resize device\n"
-" -j, --associated <file> list all devices associated with <file>\n"
-msgstr ""
-" -a, --all 列出所有使用的裝置\n"
-" -d, --detach <loopdev> [...] 卸離一或多個裝置\n"
-" -D, --detach-all 卸離所有使用的裝置\n"
-" -f, --find 尋找先未使用的裝置\n"
-" -c, --set-capacity<loopdev> 調整大小裝置\n"
-" -j, --associated<檔案> 列出所有裝置關聯的與<檔案>\n"
-
-#: sys-utils/losetup.c:379
-#, fuzzy
-msgid " -o, --offset <num> start at offset <num> into file\n"
-msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+#: misc-utils/lsfd-filter.c:759
+#, c-format
+msgid "error: unsupported column data type: %d, column: %s"
+msgstr ""
-#: sys-utils/losetup.c:380
-msgid ""
-" --sizelimit <num> device limited to <num> bytes of the file\n"
+#: misc-utils/lsfd-filter.c:804 misc-utils/lsfd-filter.c:834
+#, c-format
+msgid "error: empty right side expression: %s"
msgstr ""
-#: sys-utils/losetup.c:381
+#: misc-utils/lsfd-filter.c:874
#, fuzzy
-msgid " -P, --partscan create partitioned loop device\n"
-msgstr " -n, --noparity 設定同位到無\n"
+msgid "error: empty filter expression"
+msgstr "沒有前一個正規表示式"
-#: sys-utils/losetup.c:382
-#, fuzzy
-msgid " -r, --read-only setup read-only loop device\n"
-msgstr " -s --shared 提取共享的鎖定\n"
+#: misc-utils/lsfd-filter.c:975
+#, fuzzy, c-format
+#| msgid "unexpected end of file on %s"
+msgid "unexpected type in filter application: %s"
+msgstr "未預期的檔案結束於 %s"
-#: sys-utils/losetup.c:383
-msgid ""
-" --show print device name after setup (with -f)\n"
-msgstr ""
+#: misc-utils/lsfd-filter.c:1076
+#, fuzzy, c-format
+msgid "error: unexpected operand type %s for: %s"
+msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
-#: sys-utils/losetup.c:384
-#, fuzzy
-msgid " -v, --verbose verbose mode\n"
-msgstr " -v, --verbose 列印詳細的資料\n"
+#: misc-utils/lsfd-filter.c:1199 misc-utils/lsfd-filter.c:1232
+#: misc-utils/lsfd-filter.c:1254
+#, fuzzy, c-format
+msgid "error: unexpected left operand type %s for: %s"
+msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
-#: sys-utils/losetup.c:388
-#, fuzzy
-msgid " -l, --list list info about all or specified\n"
-msgstr " -T, --test 測試用於 getopt (1) 版本\n"
+#: misc-utils/lsfd-filter.c:1207 misc-utils/lsfd-filter.c:1240
+#: misc-utils/lsfd-filter.c:1262
+#, fuzzy, c-format
+msgid "error: unexpected right operand type %s for: %s"
+msgstr "輸入錯誤：未預期的字元 %c 之後 %s 欄位"
-#: sys-utils/losetup.c:389
-msgid " -O, --output <cols> specify columns to output for --list\n"
+#: misc-utils/lsfd-filter.c:1269
+#, c-format
+msgid "error: string literal is expected as right operand for: %s"
msgstr ""
-#: sys-utils/losetup.c:390
-#, fuzzy
-msgid " -n, --noheadings don't print headings for --list ouput\n"
-msgstr " -u, --unquote 不引言輸出\n"
-
-#: sys-utils/losetup.c:391
-#, fuzzy
-msgid " --raw use raw --list output format\n"
-msgstr " -V, --version 輸出版本資訊\n"
+#: misc-utils/lsfd-filter.c:1285
+#, fuzzy, c-format
+msgid "error: could not compile regular expression %s: %s"
+msgstr "沒有前一個正規表示式"
-#: sys-utils/losetup.c:397
-#, fuzzy
-msgid ""
-"\n"
-"Available --list columns:\n"
+#: misc-utils/lsfd-filter.c:1321
+msgid "error: unbalanced parenthesis: ("
msgstr ""
-"\n"
-"可用欄位：\n"
-#: sys-utils/losetup.c:417
-#, fuzzy, c-format
-msgid ""
-"%s: Warning: file is smaller than 512 bytes; the loop device may be useless "
-"or invisible for system tools."
+#: misc-utils/lsfd-filter.c:1327
+#, c-format
+msgid "error: garbage at the end of expression: %s"
msgstr ""
-"%s：警告：檔案小於 512 位元組，迴圈裝置也許是無用的或隱形的用於系統工具。"
-#: sys-utils/losetup.c:421
-#, fuzzy, c-format
-msgid ""
-"%s: Warning: file does not fit into a 512-byte sector; the end of the file "
-"will be ignored."
-msgstr "%s：警告：檔案不符合進入 512-byte 磁區結束的檔案將被忽略。"
+#: misc-utils/lsfd-filter.c:1333
+#, c-format
+msgid "error: bool expression is expected: %s"
+msgstr ""
-#: sys-utils/losetup.c:494 sys-utils/losetup.c:504 sys-utils/losetup.c:602
-#: sys-utils/losetup.c:616 sys-utils/losetup.c:696
-#, fuzzy, c-format
-msgid "%s: failed to use device"
-msgstr "%s：無法使用裝置"
+#: misc-utils/lsfd.h:232
+#, fuzzy
+msgid "failed to allocate memory for string"
+msgstr "配置記憶體時失敗：%m"
-#: sys-utils/losetup.c:613
+#: misc-utils/lsfd-sock-xinfo.c:228
#, fuzzy
-msgid "no loop device specified"
-msgstr "沒有迴圈裝置指定的"
+msgid "failed to alloc path context for /var/run/netns"
+msgstr "callocate cpu 集合時失敗"
-#: sys-utils/losetup.c:621
+#: misc-utils/lslocks.c:75
#, fuzzy
-msgid "no file specified"
-msgstr "沒有檔案指定的"
+msgid "command of the process holding the lock"
+msgstr "命令的處理保有鎖定"
-#: sys-utils/losetup.c:628
-#, fuzzy, c-format
-msgid "the options %s are allowed during loop device setup only"
-msgstr "選項 %s 被允許到迴圈裝置設定只有"
+#: misc-utils/lslocks.c:76
+#, fuzzy
+msgid "PID of the process holding the lock"
+msgstr "PID 的處理保有鎖定"
-#: sys-utils/losetup.c:633
+#: misc-utils/lslocks.c:77
#, fuzzy
-msgid "the option --offset is not allowed in this context"
-msgstr "選項 --offset 未被允許在中這個語境。"
+msgid "kind of lock"
+msgstr "大小的鎖定"
-#: sys-utils/losetup.c:653 sys-utils/losetup.c:707
+#: misc-utils/lslocks.c:78
#, fuzzy
-msgid "cannot find an unused loop device"
-msgstr "找不到未使用的裝置"
+msgid "size of the lock"
+msgstr "大小的鎖定"
-#: sys-utils/losetup.c:663
-#, fuzzy, c-format
-msgid "%s: failed to use backing file"
-msgstr "%s：無法使用上一步檔案"
+#: misc-utils/lslocks.c:81
+#, fuzzy
+msgid "lock access mode"
+msgstr "鎖定存取模式"
-#: sys-utils/losetup.c:677
-#, fuzzy, c-format
-msgid "%s: failed to set up loop device, offset is not 512-byte aligned."
-msgstr "%s：無法設定迴圈裝置"
+#: misc-utils/lslocks.c:82
+#, fuzzy
+msgid "mandatory state of the lock: 0 (none), 1 (set)"
+msgstr "必要狀態的鎖定：0 (無)，1 (設定)"
-#: sys-utils/losetup.c:680
-#, fuzzy, c-format
-msgid "%s: failed to set up loop device"
-msgstr "%s：無法設定迴圈裝置"
+#: misc-utils/lslocks.c:83
+#, fuzzy
+msgid "relative byte offset of the lock"
+msgstr "相對的位元組偏移的鎖定"
-#: sys-utils/losetup.c:728
-#, fuzzy, c-format
-msgid "%s: set capacity failed"
-msgstr "%s：設定容量失敗"
+#: misc-utils/lslocks.c:84
+#, fuzzy
+msgid "ending offset of the lock"
+msgstr "結束部分偏移的鎖定"
-#: sys-utils/lscpu.c:71
-msgid "none"
-msgstr "無"
+#: misc-utils/lslocks.c:85
+#, fuzzy
+msgid "path of the locked file"
+msgstr "路徑的鎖定的檔案"
-#: sys-utils/lscpu.c:72
-msgid "para"
-msgstr "部分"
+#: misc-utils/lslocks.c:86
+#, fuzzy
+msgid "PID of the process blocking the lock"
+msgstr "PID 的處理保有鎖定"
-#: sys-utils/lscpu.c:73
-msgid "full"
-msgstr "全部"
+#: misc-utils/lslocks.c:234
+#, fuzzy, c-format
+msgid "failed to parse '%s'"
+msgstr "剖析 %s 時失敗"
-#: sys-utils/lscpu.c:74
-msgid "container"
+#: misc-utils/lslocks.c:266
+#, fuzzy
+msgid "failed to parse ID"
+msgstr "剖析 %s 時失敗"
+
+#: misc-utils/lslocks.c:288 misc-utils/uuidd.c:800 misc-utils/waitpid.c:57
+#: sys-utils/nsenter.c:299
+msgid "failed to parse pid"
+msgstr "剖析 pid 時失敗"
+
+#: misc-utils/lslocks.c:294
+msgid "(undefined)"
msgstr ""
-#: sys-utils/lscpu.c:113
+#: misc-utils/lslocks.c:303
#, fuzzy
-msgid "horizontal"
-msgstr "水平"
+msgid "failed to parse start"
+msgstr "剖析開始時失敗"
-#: sys-utils/lscpu.c:114
+#: misc-utils/lslocks.c:310
#, fuzzy
-msgid "vertical"
-msgstr "å\9e\82ç\9b´"
+msgid "failed to parse end"
+msgstr "å\89\96æ\9e\90çµ\90æ\9d\9fæ\99\82失æ\95\97"
-#: sys-utils/lscpu.c:250
+#: misc-utils/lslocks.c:548
#, fuzzy
-msgid "logical CPU number"
-msgstr "邏輯的 CPU 數字"
+msgid "List local system locks.\n"
+msgstr "無法設定系統時鐘。\n"
-#: sys-utils/lscpu.c:251
+#: misc-utils/lslocks.c:551
#, fuzzy
-msgid "logical core number"
-msgstr "邏輯的核心數字"
+msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/lscpu.c:252
-#, fuzzy
-msgid "logical socket number"
-msgstr "邏輯的通訊端數字"
+#: misc-utils/lslocks.c:553
+msgid " -i, --noinaccessible ignore locks without read permissions\n"
+msgstr ""
-#: sys-utils/lscpu.c:253
+#: misc-utils/lslocks.c:554 sys-utils/lsns.c:1293 sys-utils/rfkill.c:640
#, fuzzy
-msgid "logical NUMA node number"
-msgstr "邏輯的 NUMA 節點數字"
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/lscpu.c:254
+#: misc-utils/lslocks.c:555 sys-utils/lsns.c:1294 sys-utils/rfkill.c:641
#, fuzzy
-msgid "logical book number"
-msgstr "邏輯的書籍數字"
+msgid " -o, --output <list> define which output columns to use\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/lscpu.c:255
+#: misc-utils/lslocks.c:556 sys-utils/lsns.c:1295 sys-utils/rfkill.c:642
#, fuzzy
-msgid "shows how caches are shared between CPUs"
-msgstr "顯示如何 caches 被共享介於 CPUs"
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/lscpu.c:256
-#, fuzzy
-msgid "CPU dispatching mode on virtual hardware"
-msgstr "CPU 派送模式於虛擬硬體"
+#: misc-utils/lslocks.c:557
+msgid " -p, --pid <pid> display only locks held by this process\n"
+msgstr ""
-#: sys-utils/lscpu.c:257
+#: misc-utils/lslocks.c:558 sys-utils/lsns.c:1298 sys-utils/rfkill.c:643
#, fuzzy
-msgid "physical address of a CPU"
-msgstr "實體位址的 CPU"
+msgid " -r, --raw use the raw output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/lscpu.c:258
+#: misc-utils/lslocks.c:623 schedutils/chrt.c:413 schedutils/ionice.c:179
+#: schedutils/taskset.c:190 schedutils/uclampset.c:257 sys-utils/choom.c:102
+#: sys-utils/lsns.c:1388 sys-utils/prlimit.c:604
#, fuzzy
-msgid "shows if the hypervisor has allocated the CPU"
-msgstr "顯示如果 hypervisor 已配置 CPU"
+msgid "invalid PID argument"
+msgstr "無效的 PID 引數"
+
+#: misc-utils/mcookie.c:86
+msgid "Generate magic cookies for xauth.\n"
+msgstr ""
-#: sys-utils/lscpu.c:259
+#: misc-utils/mcookie.c:89
#, fuzzy
-msgid "shows if Linux currently makes use of the CPU"
-msgstr "顯示如果 Linux 目前利用 CPU"
+msgid " -f, --file <file> use file as a cookie seed\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: sys-utils/lscpu.c:260
-msgid "shows the maximum mhz of the CPU"
+#: misc-utils/mcookie.c:90
+msgid " -m, --max-size <num> limit how much is read from seed files\n"
msgstr ""
-#: sys-utils/lscpu.c:261
-msgid "shows the minimum mhz of the CPU"
-msgstr ""
+#: misc-utils/mcookie.c:91
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/lscpu.c:356
-msgid "error: uname failed"
-msgstr "錯誤：uname 失敗"
+#: misc-utils/mcookie.c:97 misc-utils/wipefs.c:656 sys-utils/blkdiscard.c:111
+#: sys-utils/fallocate.c:107 sys-utils/fstrim.c:475
+msgid "<num>"
+msgstr ""
-#: sys-utils/lscpu.c:423
+#: misc-utils/mcookie.c:124
#, fuzzy, c-format
-msgid "failed to determine number of CPUs: %s"
-msgstr "剖析列號的時失敗"
+msgid "Got %zu byte from %s\n"
+msgid_plural "Got %zu bytes from %s\n"
+msgstr[0] "從 %2$s 取得 %1$d 位元組\n"
-#: sys-utils/lscpu.c:983 sys-utils/lscpu.c:993
+#: misc-utils/mcookie.c:129
#, fuzzy, c-format
-msgid "Y"
-msgstr "Y"
+msgid "closing %s failed"
+msgstr "關閉 %s 失敗"
-#: sys-utils/lscpu.c:983 sys-utils/lscpu.c:993
-#, fuzzy, c-format
-msgid "N"
-msgstr "N"
+#: misc-utils/mcookie.c:168 sys-utils/blkdiscard.c:204 sys-utils/fstrim.c:542
+#: text-utils/hexdump.c:124
+#, fuzzy
+msgid "failed to parse length"
+msgstr "剖析長度時失敗"
-#: sys-utils/lscpu.c:1075
-#, fuzzy, c-format
-msgid ""
-"# The following is the parsable format, which can be fed to other\n"
-"# programs. Each different item in every column has an unique ID\n"
-"# starting from zero.\n"
+#: misc-utils/mcookie.c:181
+msgid "--max-size ignored when used without --file"
msgstr ""
-"# 下列是 parsable 格式，該項可以被 fed 到其他\n"
-"# 程式。每個不同的項目在中每欄有唯一識別號\n"
-"# 開始從零。\n"
-#: sys-utils/lscpu.c:1215
-msgid "Architecture:"
-msgstr "架構："
+#: misc-utils/mcookie.c:190
+#, fuzzy, c-format
+msgid "Got %d byte from %s\n"
+msgid_plural "Got %d bytes from %s\n"
+msgstr[0] "從 %2$s 取得 %1$d 位元組\n"
-#: sys-utils/lscpu.c:1229
-msgid "CPU op-mode(s):"
-msgstr "CPU 作業模式："
+#: misc-utils/namei.c:101
+#, c-format
+msgid "failed to read symlink: %s"
+msgstr "讀取符號連結時失敗：%s"
-#: sys-utils/lscpu.c:1232 sys-utils/lscpu.c:1234
-#, fuzzy
-msgid "Byte Order:"
-msgstr "位元組次序："
+#: misc-utils/namei.c:359
+#, fuzzy, c-format
+msgid " %s [options] <pathname>...\n"
+msgstr " %s [選項] <device> [...]\n"
-#: sys-utils/lscpu.c:1236
-#, fuzzy
-msgid "CPU(s):"
-msgstr "CPU (s)："
+#: misc-utils/namei.c:362
+msgid "Follow a pathname until a terminal point is found.\n"
+msgstr ""
-#: sys-utils/lscpu.c:1239
+#: misc-utils/namei.c:366
#, fuzzy
-msgid "On-line CPU(s) mask:"
-msgstr "線上 CPU (s) 遮罩："
+msgid ""
+" -x, --mountpoints show mount point directories with a 'D'\n"
+" -m, --modes show the mode bits of each file\n"
+" -o, --owners show owner and group name of each file\n"
+" -l, --long use a long listing format (-m -o -v) \n"
+" -n, --nosymlinks don't follow symlinks\n"
+" -v, --vertical vertical align of modes and owners\n"
+msgstr ""
+" -h, --help 顯示這份說明文字\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -x, --mountpoints 顯示掛載點目錄與『D』\n"
+" -m, --modes 顯示模式位元的每個檔案\n"
+" -o, --owners 顯示擁有者和群組名稱的每個檔案\n"
+" -l, --long 使用長列表格式 (-m -o -v)\n"
+" -n, --nosymlinks 不追隨符號連結\n"
+" -v, --vertical 垂直對齊的模式和擁有者\n"
-#: sys-utils/lscpu.c:1240
+#: misc-utils/namei.c:373
#, fuzzy
-msgid "On-line CPU(s) list:"
-msgstr "線上 CPU (s) 清單："
+msgid " -Z, --context print any security context of each file \n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/lscpu.c:1258
+#: misc-utils/namei.c:449
#, fuzzy
-msgid "Off-line CPU(s) mask:"
-msgstr "離線 CPU (s) 遮罩："
+msgid "pathname argument is missing"
+msgstr "路徑名稱引數缺少"
-#: sys-utils/lscpu.c:1259
+#: misc-utils/namei.c:458
#, fuzzy
-msgid "Off-line CPU(s) list:"
-msgstr "é\9b¢ç·\9a CPU (s) æ¸\85å\96®ï¼\9a"
+msgid "failed to allocate GID cache"
+msgstr "é\85\8dç½®è¿ä»£å\99¨æ\99\82失æ\95\97"
-#: sys-utils/lscpu.c:1290
-msgid "Thread(s) per core:"
-msgstr "每核心執行緒數："
+#: misc-utils/namei.c:480
+#, c-format
+msgid "%s: exceeded limit of symlinks"
+msgstr "%s：超出符號連結的限制"
-#: sys-utils/lscpu.c:1291
-msgid "Core(s) per socket:"
-msgstr "每通訊端核心數："
+#: misc-utils/pipesz.c:65
+#, fuzzy, c-format
+msgid " %s [options] [--set <size>] [--] [command]\n"
+msgstr " %s [選項] <user> [<ttyname>]\n"
-#: sys-utils/lscpu.c:1294
-#, fuzzy
-msgid "Socket(s) per book:"
-msgstr "通訊端各書籍："
+#: misc-utils/pipesz.c:66
+#, fuzzy, c-format
+msgid " %s [options] --get\n"
+msgstr " %s [選項]\n"
-#: sys-utils/lscpu.c:1296
-#, fuzzy
-msgid "Book(s):"
-msgstr "書籍："
+#. TRANSLATORS: 'command' refers to a program argument
+#: misc-utils/pipesz.c:70
+msgid "Set or examine pipe buffer sizes and optionally execute command."
+msgstr ""
-#: sys-utils/lscpu.c:1298
+#: misc-utils/pipesz.c:73
#, fuzzy
-msgid "Socket(s):"
-msgstr "通訊端："
-
-#: sys-utils/lscpu.c:1302
-msgid "NUMA node(s):"
-msgstr "NUMA 節點："
-
-#: sys-utils/lscpu.c:1304
-msgid "Vendor ID:"
-msgstr "供應商識別號："
-
-#: sys-utils/lscpu.c:1306
-msgid "CPU family:"
-msgstr "CPU 家族："
+msgid " -g, --get examine pipe buffers"
+msgstr " -u --unlock 移除鎖定\n"
-#: sys-utils/lscpu.c:1308
-msgid "Model:"
-msgstr "型號："
+#: misc-utils/pipesz.c:76
+#, fuzzy, c-format
+msgid ""
+" -s, --set <size> set pipe buffer sizes\n"
+" size defaults to %s\n"
+msgstr ""
+" --noadjfile 不存取 %s；這個需求使用的\n"
+" 還是 --utc 或 --localtime\n"
+" --adjfile <file> 指定路徑到調整檔案；\n"
+" 預設是 %s\n"
-#: sys-utils/lscpu.c:1310
+#: misc-utils/pipesz.c:81
#, fuzzy
-msgid "Model name:"
-msgstr "型號："
-
-#: sys-utils/lscpu.c:1312
-msgid "Stepping:"
-msgstr "製程："
-
-#: sys-utils/lscpu.c:1314
-msgid "CPU MHz:"
-msgstr "CPU MHz："
+msgid " -f, --file <path> act on a file"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/lscpu.c:1316
+#: misc-utils/pipesz.c:82
#, fuzzy
-msgid "CPU max MHz:"
-msgstr "CPU MHz："
+msgid " -n, --fd <num> act on a file descriptor"
+msgstr " -h, --help 顯示這份說明然後離開\n"
-#: sys-utils/lscpu.c:1318
+#: misc-utils/pipesz.c:83
#, fuzzy
-msgid "CPU min MHz:"
-msgstr "CPU MHz："
+msgid " -i, --stdin act on standard input"
+msgstr " -f 不分割長列\n"
-#: sys-utils/lscpu.c:1320
+#: misc-utils/pipesz.c:84
#, fuzzy
-msgid "BogoMIPS:"
-msgstr "BogoMIPS："
-
-#: sys-utils/lscpu.c:1323 sys-utils/lscpu.c:1325
-msgid "Virtualization:"
-msgstr "虛擬："
+msgid " -o, --stdout act on standard output"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
-#: sys-utils/lscpu.c:1328
+#: misc-utils/pipesz.c:85
#, fuzzy
-msgid "Hypervisor:"
-msgstr "Hypervisor："
-
-#: sys-utils/lscpu.c:1330
-msgid "Hypervisor vendor:"
-msgstr "Hypervisor 供應商："
+msgid " -e, --stderr act on standard error"
+msgstr " -s 列印訊息到標準輸出\n"
-#: sys-utils/lscpu.c:1331
-msgid "Virtualization type:"
-msgstr "虛擬型態："
+#: misc-utils/pipesz.c:88
+#, fuzzy
+msgid " -c, --check do not continue after an error"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/lscpu.c:1334
+#: misc-utils/pipesz.c:89
#, fuzzy
-msgid "Dispatching mode:"
-msgstr "派送模式："
+msgid " -q, --quiet do not warn of non-fatal errors"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: sys-utils/lscpu.c:1340
-#, c-format
-msgid "%s cache:"
-msgstr "%s 快取："
+#: misc-utils/pipesz.c:90
+#, fuzzy
+msgid " -v, --verbose provide detailed output"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/lscpu.c:1346
-#, c-format
-msgid "NUMA node%d CPU(s):"
-msgstr "NUMA node%d CPU(s)："
+#. TRANSLATORS: '%s' refers to a file
+#: misc-utils/pipesz.c:111
+#, fuzzy, c-format
+#| msgid "cannot get size of %s"
+msgid "cannot get pipe buffer size of %s"
+msgstr "無法取得 %s 的大小"
-#: sys-utils/lscpu.c:1359
-#, fuzzy
-msgid ""
-" -a, --all print both online and offline CPUs (default for -"
-"e)\n"
-msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+#. TRANSLATORS: '%s' refers to a file
+#: misc-utils/pipesz.c:131
+#, fuzzy, c-format
+#| msgid "cannot get size of %s"
+msgid "cannot set pipe buffer size of %s"
+msgstr "無法取得 %s 的大小"
-#: sys-utils/lscpu.c:1360
-#, fuzzy
-msgid " -b, --online print online CPUs only (default for -p)\n"
-msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+#. TRANSLATORS: '%s' refers to a file, '%d' to a buffer size in bytes
+#: misc-utils/pipesz.c:134
+#, c-format
+msgid "%s pipe buffer size set to %d"
+msgstr ""
-#: sys-utils/lscpu.c:1361
-#, fuzzy
-msgid " -c, --offline print offline CPUs only\n"
-msgstr " -n, --noparity 設定同位到無\n"
+#. TRANSLATORS: '%s' refers to a system file
+#: misc-utils/pipesz.c:185 misc-utils/pipesz.c:191
+#, fuzzy, c-format
+msgid "cannot parse %s"
+msgstr "無法開啟 %s"
-#: sys-utils/lscpu.c:1362
-msgid " -e, --extended[=<list>] print out an extended readable format\n"
+#: misc-utils/pipesz.c:288
+msgid "cannot specify a command with --get"
msgstr ""
-#: sys-utils/lscpu.c:1363
-msgid " -p, --parse[=<list>] print out a parsable format\n"
+#. TRANSLATORS: a column that contains the names of files that are unix pipes
+#: misc-utils/pipesz.c:294
+msgid "pipe"
msgstr ""
-#: sys-utils/lscpu.c:1364
-msgid " -s, --sysroot <dir> use specified directory as system root\n"
+#. TRANSLATORS: a column that contains buffer sizes in bytes
+#: misc-utils/pipesz.c:296 sys-utils/ipcs.c:303 sys-utils/ipcs.c:528
+msgid "size"
msgstr ""
-#: sys-utils/lscpu.c:1365
+#. TRANSLATORS: a column that contains an amount of data which has not been used by a program
+#: misc-utils/pipesz.c:298
#, fuzzy
-msgid ""
-" -x, --hex print hexadecimal masks rather than lists of CPUs\n"
-msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+#| msgid ", ready"
+msgid "unread"
+msgstr "，就緒"
+
+#: misc-utils/pipesz.c:311
+#, fuzzy
+#| msgid "mount: type specified twice"
+msgid "using last specified size"
+msgstr "mount：類型被指定了兩次"
-#: sys-utils/lscpu.c:1375
+#: misc-utils/rename.c:117
#, fuzzy, c-format
-msgid ""
-"\n"
-"For more details see lscpu(1).\n"
-msgstr ""
-"\n"
-"以獲得更多細節參看 lscpu (1)。\n"
+msgid "%s: overwrite `%s'? "
+msgstr "%s：寫入錯誤：%s\n"
-#: sys-utils/lscpu.c:1463
+#: misc-utils/rename.c:159 misc-utils/rename.c:224
#, fuzzy, c-format
-msgid ""
-"%s: options --all, --online and --offline may only be used with options --"
-"extended or --parse.\n"
-msgstr ""
-"%s：選項 --all，--online 和 --offline 也許會只有被使用與選項 --extended 或 --"
-"parsable。\n"
+msgid "%s: not accessible"
+msgstr "%s：並非目錄"
-#: sys-utils/mount.c:66 sys-utils/umount.c:115
+#: misc-utils/rename.c:168
#, fuzzy, c-format
-msgid "only root can use \"--%s\" option (effective UID is %u)"
-msgstr "只有根可以使用「--%s」選項 (有效 UID 是 %u)"
+msgid "%s: not a symbolic link"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/mount.c:69 sys-utils/umount.c:118
+#: misc-utils/rename.c:175
#, fuzzy, c-format
-msgid "only root can do that (effective UID is %u)"
-msgstr "只有根可以那樣做 (有效 UID 是 %u)"
+msgid "%s: readlink failed"
+msgstr "%s：開啟失敗"
-#: sys-utils/mount.c:73 sys-utils/umount.c:122
+#: misc-utils/rename.c:191
#, fuzzy, c-format
-msgid "only root can use \"--%s\" option"
-msgstr "只有根可以使用「--%s」選項"
-
-#: sys-utils/mount.c:74 sys-utils/umount.c:123
-#, fuzzy
-msgid "only root can do that"
-msgstr "只有根可以那樣做"
+msgid "Skipping existing link: `%s' -> `%s'\n"
+msgstr "…跳到檔案 "
-#: sys-utils/mount.c:85 sys-utils/umount.c:60
+#: misc-utils/rename.c:197
#, fuzzy, c-format
-msgid "%s from %s (libmount %s"
-msgstr "%s 從 %s (libmount %s"
+msgid "%s: unlink failed"
+msgstr "%s：lseek 失敗"
-#: sys-utils/mount.c:102 sys-utils/umount.c:46
+#: misc-utils/rename.c:201
#, fuzzy, c-format
-msgid "%s: parse error: ignore entry at line %d."
-msgstr "%s：剖析錯誤：忽略條目於列 %d。"
-
-#: sys-utils/mount.c:131
-#, fuzzy
-msgid "failed to read mtab"
-msgstr "讀取 mtab 時失敗"
+msgid "%s: symlinking to %s failed"
+msgstr "%s：建立連結到 %s 失敗"
-#: sys-utils/mount.c:193 sys-utils/umount.c:282
+#: misc-utils/rename.c:240
#, fuzzy, c-format
-msgid "%-25s: ignored\n"
-msgstr "%-25s: 忽略\n"
+msgid "Skipping existing file: `%s'\n"
+msgstr "…跳到檔案 "
-#: sys-utils/mount.c:194
+#: misc-utils/rename.c:244
#, fuzzy, c-format
-msgid "%-25s: already mounted\n"
-msgstr "%-25s: 已經掛載\n"
+msgid "%s: rename to %s failed"
+msgstr "%s：建立連結到 %s 失敗"
-#: sys-utils/mount.c:248
+#: misc-utils/rename.c:258
#, fuzzy, c-format
-msgid "%s: %s moved to %s.\n"
-msgstr "%s：掛載的於 %s"
+msgid " %s [options] <expression> <replacement> <file>...\n"
+msgstr " %s [選項] 運算式置換檔案…\n"
-#: sys-utils/mount.c:250
-#, fuzzy, c-format
-msgid "%s: %s bound on %s.\n"
-msgstr "%s：掛載的於 %s"
+#: misc-utils/rename.c:262
+#, fuzzy
+msgid "Rename files.\n"
+msgstr "uname 失敗"
-#: sys-utils/mount.c:253 sys-utils/mount.c:257
-#, fuzzy, c-format
-msgid "%s: %s mounted on %s.\n"
-msgstr "%s：掛載的於 %s"
+#: misc-utils/rename.c:265
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/mount.c:255
-#, c-format
-msgid "%s: %s propagation flags changed.\n"
-msgstr ""
+#: misc-utils/rename.c:266
+#, fuzzy
+msgid " -s, --symlink act on the target of symlinks\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/mount.c:377
+#: misc-utils/rename.c:267
#, fuzzy
-msgid "WARNING: failed to apply propagation flags"
-msgstr "附加選項時失敗"
+msgid " -n, --no-act do not make any changes\n"
+msgstr " -f 不分割長列\n"
-#: sys-utils/mount.c:399
-#, fuzzy, c-format
-msgid "only root can mount %s on %s"
-msgstr "只有根可以掛載 %s 於 %s"
+#: misc-utils/rename.c:268
+#, fuzzy
+msgid " -a, --all replace all occurrences\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/mount.c:402
-#, fuzzy, c-format
-msgid "%s is already mounted"
-msgstr "%s 已經掛載"
+#: misc-utils/rename.c:269
+#, fuzzy
+msgid " -l, --last replace only the last occurrence\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
-#: sys-utils/mount.c:406
-#, fuzzy, c-format
-msgid "can't find %s in %s"
-msgstr "找不到 %s 在中 %s"
+#: misc-utils/rename.c:270
+msgid " -o, --no-overwrite don't overwrite existing files\n"
+msgstr ""
-#: sys-utils/mount.c:413
-#, fuzzy, c-format
-msgid "can't find mountpoint %s in %s"
-msgstr "找不到 mountpoint %s 在中 %s"
+#: misc-utils/rename.c:271
+msgid " -i, --interactive prompt before overwrite\n"
+msgstr ""
-#: sys-utils/mount.c:416
-#, fuzzy, c-format
-msgid "can't find mount source %s in %s"
-msgstr "找不到掛載來源 %s 在中 %s"
+#: misc-utils/rename.c:361
+#, fuzzy
+msgid "failed to get terminal attributes"
+msgstr "無法取得終端機屬性用於 %s"
-#: sys-utils/mount.c:420
-#, fuzzy, c-format
-msgid ""
-"%s: more filesystems detected. This should not happen,\n"
-" use -t <type> to explicitly specify the filesystem type or\n"
-" use wipefs(8) to clean up the device."
+#: misc-utils/uuidd.c:99
+msgid "A daemon for generating UUIDs.\n"
msgstr ""
-"掛載：%s：偵測到多個檔案系統。這不應發生，\n"
-" 使用 -t <type> 以明確指定檔案系統型態或\n"
-" 使用 wipefs(8) 以清理裝置。\n"
-#: sys-utils/mount.c:426
+#: misc-utils/uuidd.c:101
#, fuzzy
-msgid "I could not determine the filesystem type, and none was specified"
-msgstr "我無法決定檔案系統型態，而無被指定的"
+msgid " -p, --pid <path> path to pid file\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/mount.c:429
+#: misc-utils/uuidd.c:102
#, fuzzy
-msgid "you must specify the filesystem type"
-msgstr "您必須指定檔案系統型態"
+msgid " -s, --socket <path> path to socket\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/mount.c:433
-#, fuzzy, c-format
-msgid "can't find %s"
-msgstr "找不到 %s"
+#: misc-utils/uuidd.c:103
+#, fuzzy
+msgid " -T, --timeout <sec> specify inactivity timeout\n"
+msgstr " -w --timeout <secs> 等待限制的數目的時間\n"
-#: sys-utils/mount.c:435
+#: misc-utils/uuidd.c:104
#, fuzzy
-msgid "mount source not defined"
-msgstr "掛載來源無法定義"
+msgid " -k, --kill kill running daemon\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
-#: sys-utils/mount.c:439 sys-utils/mount.c:441
+#: misc-utils/uuidd.c:105
#, fuzzy
-msgid "failed to parse mount options"
-msgstr "剖析掛載選項時失敗"
+msgid " -r, --random test random-based generation\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/mount.c:447
-#, fuzzy, c-format
-msgid "%s: mount failed"
-msgstr "%s：掛載失敗"
+#: misc-utils/uuidd.c:106
+#, fuzzy
+msgid " -t, --time test time-based generation\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
-#: sys-utils/mount.c:457
-#, fuzzy, c-format
-msgid "%s: filesystem mounted, but mount(8) failed"
-msgstr "%s：檔案系統掛載，但是掛載 (8) 失敗"
+#: misc-utils/uuidd.c:107
+#, fuzzy
+msgid " -n, --uuids <num> request number of uuids\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
-#: sys-utils/mount.c:474 sys-utils/mount.c:526
-#, fuzzy, c-format
-msgid "mount point %s is not a directory"
-msgstr "掛載點 %s 並非目錄"
+#: misc-utils/uuidd.c:108
+#, fuzzy
+msgid " -P, --no-pid do not create pid file\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
-#: sys-utils/mount.c:478
+#: misc-utils/uuidd.c:109
#, fuzzy
-msgid "must be superuser to use mount"
-msgstr "必須是系統管理者以使用掛載"
+msgid " -F, --no-fork do not daemonize using double-fork\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: sys-utils/mount.c:486
-#, fuzzy, c-format
-msgid "%s is busy"
-msgstr "%s 忙碌中"
+#: misc-utils/uuidd.c:110
+#, fuzzy
+msgid " -S, --socket-activation do not create listening socket\n"
+msgstr "兩者 --socket-activation 和 --socket 指定的。忽略 --socket\n"
-#: sys-utils/mount.c:490
-#, fuzzy, c-format
-msgid "%s is already mounted or %s busy"
-msgstr "%s 已經掛載的或 %s 忙碌"
+#: misc-utils/uuidd.c:111
+msgid " -C, --cont-clock[=<NUM>[hd]]\n"
+msgstr ""
-#: sys-utils/mount.c:502
-#, fuzzy, c-format
-msgid " %s is already mounted on %s\n"
-msgstr " %s 已經掛載的於 %s\n"
+#: misc-utils/uuidd.c:112
+#, fuzzy
+msgid " activate continuous clock handling\n"
+msgstr " -h 顯示這份說明然後離開\n"
-#: sys-utils/mount.c:510
-#, fuzzy, c-format
-msgid "mount point %s does not exist"
-msgstr "掛載點 %s 不存在"
+#: misc-utils/uuidd.c:113
+#, fuzzy
+msgid " -d, --debug run in debugging mode\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
-#: sys-utils/mount.c:512
-#, fuzzy, c-format
-msgid "mount point %s is a symbolic link to nowhere"
-msgstr "掛載點 %s 是符號連結到 nowhere"
+#: misc-utils/uuidd.c:114
+#, fuzzy
+msgid " -q, --quiet turn on quiet mode\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: sys-utils/mount.c:517
+#: misc-utils/uuidd.c:146
+msgid "bad arguments"
+msgstr "不當的引數"
+
+#: misc-utils/uuidd.c:153
+msgid "socket"
+msgstr "通訊端"
+
+#: misc-utils/uuidd.c:164
+msgid "connect"
+msgstr "連接"
+
+#: misc-utils/uuidd.c:184
+msgid "write"
+msgstr "寫入"
+
+#: misc-utils/uuidd.c:192
+msgid "read count"
+msgstr "讀取計數"
+
+#: misc-utils/uuidd.c:198
+msgid "bad response length"
+msgstr "不當的回應長度"
+
+#: misc-utils/uuidd.c:249
#, fuzzy, c-format
-msgid "special device %s does not exist"
-msgstr "ç\89¹æ®\8aè£\9dç½® %s ä¸\8då\98å\9c¨"
+msgid "cannot lock %s"
+msgstr "ç\84¡æ³\95é\96\8bå\95\9f %s"
-#: sys-utils/mount.c:520 sys-utils/mount.c:535
+#: misc-utils/uuidd.c:274
#, fuzzy
-msgid "mount(2) failed"
-msgstr "掛載 (2) 失敗"
+msgid "couldn't create unix stream socket"
+msgstr "無法建立 unix 串流通訊端：%m"
-#: sys-utils/mount.c:531
+#: misc-utils/uuidd.c:299
#, fuzzy, c-format
-msgid "special device %s does not exist (a path prefix is not a directory)"
-msgstr "ç\89¹æ®\8aè£\9dç½® %s ä¸\8då\98å\9c¨ (a è·¯å¾\91å\89\8d綴並é\9d\9eç\9b®é\8c\84)"
+msgid "couldn't bind unix socket %s"
+msgstr "ç\84¡æ³\95繫çµ\90 unix é\80\9aè¨\8a端 %sï¼\9a%m\n"
-#: sys-utils/mount.c:541
-#, fuzzy, c-format
-msgid "%s not mounted or bad option"
-msgstr "%s 無法掛載的或不當的選項"
+#: misc-utils/uuidd.c:326
+#, fuzzy
+msgid "receiving signal failed"
+msgstr "重新命名 %s 到 %s 失敗"
-#: sys-utils/mount.c:543
-#, fuzzy, c-format
-msgid "%s is not mountpoint or bad option"
-msgstr "%s 不是 mountpoint 或不當的選項"
+#: misc-utils/uuidd.c:341
+msgid "timed out"
+msgstr "已逾時"
-#: sys-utils/mount.c:545
-msgid ""
-"bad option. Note that moving a mount residing under a shared\n"
-" mount is unsupported."
-msgstr ""
+#: misc-utils/uuidd.c:377 sys-utils/flock.c:276
+#, fuzzy
+msgid "cannot set up timer"
+msgstr "無法設定群組識別號"
-#: sys-utils/mount.c:548
+#: misc-utils/uuidd.c:385
#, fuzzy, c-format
-msgid ""
-"wrong fs type, bad option, bad superblock on %s,\n"
-" missing codepage or helper program, or other error"
-msgstr ""
-"錯誤的 fs 型態，不當的選項，不當的超區塊於 %s，\n"
-" 缺少的編碼頁或輔助程式程式，或其他錯誤"
+msgid "uuidd daemon is already running at pid %s"
+msgstr "uuidd 守護程式已經以 pid %s 運行中\n"
-#: sys-utils/mount.c:554
+#: misc-utils/uuidd.c:394
#, fuzzy, c-format
-msgid ""
-" (for several filesystems (e.g. nfs, cifs) you might\n"
-" need a /sbin/mount.<type> helper program)\n"
-msgstr ""
-" (用於多個檔案系統(例如：nfs，cifs) 您也許\n"
-" 需要/sbin/掛載。<type> 輔助程式程式)\n"
+msgid "couldn't listen on unix socket %s"
+msgstr "無法聽取於 unix 通訊端 %s：%m\n"
-#: sys-utils/mount.c:557
+#: misc-utils/uuidd.c:404
#, fuzzy, c-format
-msgid ""
-"\n"
-" In some cases useful info is found in syslog - try\n"
-" dmesg | tail or so.\n"
-msgstr ""
-" 在某些情況下有用資訊是找到在中 syslog - 嘗試\n"
-" dmesg|尾端之類\n"
+msgid "could not truncate file: %s"
+msgstr "無法顯示狀態「%s」"
-#: sys-utils/mount.c:567
-#, fuzzy, c-format
-msgid "%s: can't read superblock"
-msgstr "%s：無法讀取超區塊"
+#: misc-utils/uuidd.c:418
+#, fuzzy
+msgid "sd_listen_fds() failed"
+msgstr "settimeofday() 失敗"
-#: sys-utils/mount.c:571
-#, fuzzy, c-format
-msgid "unknown filesystem type '%s'"
-msgstr "不明檔案系統型態『%s』"
+#: misc-utils/uuidd.c:421
+msgid "no file descriptors received, check systemctl status uuidd.socket"
+msgstr ""
-#: sys-utils/mount.c:579
-#, fuzzy, c-format
-msgid "%s is not a block device, and stat(2) fails?"
-msgstr "%s 並非區塊裝置，而stat (2) 失敗？"
+#: misc-utils/uuidd.c:424
+#, fuzzy
+msgid "too many file descriptors received, check uuidd.socket"
+msgstr "沒有或太多檔案描述符號接收。\n"
-#: sys-utils/mount.c:581
-#, fuzzy, c-format
-msgid ""
-"the kernel does not recognize %s as a block device\n"
-" (maybe `modprobe driver'?)"
+#: misc-utils/uuidd.c:450
+#, c-format
+msgid "max_clock_offset = %u sec\n"
msgstr ""
-"內核不識別 %s 做為區塊裝置\n"
-" (也許『modprobe 驅動程式』?)"
-#: sys-utils/mount.c:584
-#, fuzzy, c-format
-msgid "%s is not a block device (maybe try `-o loop'?)"
-msgstr "%s 並非區塊裝置 (也許嘗試『-o 迴圈』?)"
+#: misc-utils/uuidd.c:461 text-utils/more.c:1367
+#, fuzzy
+msgid "poll failed"
+msgstr "意見調查() 失敗"
-#: sys-utils/mount.c:586
+#: misc-utils/uuidd.c:466
#, fuzzy, c-format
-msgid " %s is not a block device"
-msgstr " %s 並非區塊裝置"
+msgid "timeout [%d sec]\n"
+msgstr "已逾時之後 %u 秒"
-#: sys-utils/mount.c:593
-#, fuzzy, c-format
-msgid "%s is not a valid block device"
-msgstr "%s 並非有效區塊裝置"
+#: misc-utils/uuidd.c:483 sys-utils/irqtop.c:228 sys-utils/irqtop.c:231
+#: sys-utils/irqtop.c:248 term-utils/setterm.c:920 text-utils/column.c:616
+#: text-utils/column.c:646
+#, fuzzy
+msgid "read failed"
+msgstr "fread 失敗"
-#: sys-utils/mount.c:599
+#: misc-utils/uuidd.c:485
#, fuzzy, c-format
-msgid "cannot mount %s read-only"
-msgstr "無法掛載 %s 唯讀"
+msgid "error reading from client, len = %d"
+msgstr "從客戶端讀取時發生錯誤，長度 = %d\n"
-#: sys-utils/mount.c:602
-#, fuzzy, c-format
-msgid "%s is write-protected but explicit `-w' flag given"
-msgstr "%s 被防止寫入的但是明確的『-w』旗標給定的"
+#: misc-utils/uuidd.c:494
+#, c-format
+msgid "operation %d, incoming num = %d\n"
+msgstr "操作 %d，即將來到的數字 = %d\n"
-#: sys-utils/mount.c:605
-#, fuzzy, c-format
-msgid "cannot remount %s read-write, is write-protected"
-msgstr "無法 remount %s 可讀可寫，被防止寫入的"
+#: misc-utils/uuidd.c:497
+#, c-format
+msgid "operation %d\n"
+msgstr "操作 %d\n"
-#: sys-utils/mount.c:608
-#, fuzzy, c-format
-msgid "%s is write-protected, mounting read-only"
-msgstr "%s 被防止寫入的，掛載唯讀"
+#: misc-utils/uuidd.c:512 misc-utils/uuidd.c:533
+#, fuzzy
+msgid "failed to open/lock clock counter"
+msgstr "剖析大小時失敗"
-#: sys-utils/mount.c:621
-#, fuzzy, c-format
-msgid "no medium found on %s"
-msgstr "找不到任何中於 %s"
+#: misc-utils/uuidd.c:515
+#, c-format
+msgid "Generated time UUID: %s\n"
+msgstr "產生的時間 UUID：%s\n"
-#: sys-utils/mount.c:625
-#, fuzzy, c-format
-msgid "mount %s on %s failed"
-msgstr "掛載 %s 於 %s 失敗"
+#: misc-utils/uuidd.c:525
+#, c-format
+msgid "Generated random UUID: %s\n"
+msgstr "產生的隨機 UUID：%s\n"
-#: sys-utils/mount.c:649
+#: misc-utils/uuidd.c:536
#, fuzzy, c-format
-msgid "%s: failed to parse"
-msgstr "%s：無法剖析"
+msgid "Generated time UUID %s and %d following\n"
+msgid_plural "Generated time UUID %s and %d following\n"
+msgstr[0] "產生的時間 UUID %s 和 %d 下列\n"
-#: sys-utils/mount.c:688
+#: misc-utils/uuidd.c:557
#, fuzzy, c-format
-msgid "unsupported option format: %s"
-msgstr "不受支援的引數：%s"
+msgid "Generated %d UUID:\n"
+msgid_plural "Generated %d UUIDs:\n"
+msgstr[0] "產生 %d UUID：\n"
-#: sys-utils/mount.c:690
-#, fuzzy, c-format
-msgid "failed to append option '%s'"
-msgstr "附加選項時失敗"
+#: misc-utils/uuidd.c:569
+#, c-format
+msgid "Invalid operation %d\n"
+msgstr "無效的操作 %d\n"
-#: sys-utils/mount.c:697
+#: misc-utils/uuidd.c:581
#, fuzzy, c-format
-msgid ""
-" %1$s [-lhV]\n"
-" %1$s -a [options]\n"
-" %1$s [options] [--source] <source> | [--target] <directory>\n"
-" %1$s [options] <source> <directory>\n"
-" %1$s <operation> <mountpoint> [<target>]\n"
-msgstr ""
-" %1$s [-lhV]\n"
-" %1$s -a [選項]\n"
-" %1$s [選項] [--source] <source>|[--target]<目錄>\n"
-" %1$s [選項]<來源><目錄>\n"
-" %1$s<作業><mountpoint>[<目標>]\n"
-
-#: sys-utils/mount.c:706
-#, fuzzy, c-format
-msgid ""
-" -a, --all mount all filesystems mentioned in fstab\n"
-" -c, --no-canonicalize don't canonicalize paths\n"
-" -f, --fake dry run; skip the mount(2) syscall\n"
-" -F, --fork fork off for each device (use with -a)\n"
-" -T, --fstab <path> alternative file to /etc/fstab\n"
-msgstr ""
-" -a, --all 掛載所有檔案系統提及的在中 fstab\n"
-" -c, --no-canonicalize 不正則化路徑\n"
-" -f, --fake 模擬測試；跳過掛載 (2) syscall\n"
-" -F, --fork 衍生關閉用於每個裝置 (使用與 -a)\n"
-" -T, --fstab <path> 替代方案檔案到/etc/fstab\n"
-
-#: sys-utils/mount.c:712
-#, fuzzy, c-format
-msgid ""
-" -h, --help display this help text and exit\n"
-" -i, --internal-only don't call the mount.<type> helpers\n"
-" -l, --show-labels lists all mounts with LABELs\n"
-" -n, --no-mtab don't write to /etc/mtab\n"
-msgstr ""
-" -h, --help 顯示這份說明文字然後離開\n"
-" -i, --internal-only 不呼叫掛載。<type> 輔助程式\n"
-" -l, --show-labels 列出所有掛載與標貼\n"
-" -n, --no-mtab 不寫入/etc/mtab\n"
-
-#: sys-utils/mount.c:717
-#, fuzzy, c-format
-msgid ""
-" -o, --options <list> comma-separated list of mount options\n"
-" -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
-" -r, --read-only mount the filesystem read-only (same as -o ro)\n"
-" -t, --types <list> limit the set of filesystem types\n"
-msgstr ""
-" -o, --options <list> 以逗號分隔的掛載選項清單的\n"
-" -O, --test-opts<清單> 限制集合檔案系統 (使用與 -a)\n"
-" -p, --pass-fd<num> 讀取密語從檔案描述符號\n"
-" -r, --read-only 掛載檔案系統唯讀 (如同 -o ro)\n"
-" -t, --types<清單> 限制集合檔案系統類型\n"
-
-#: sys-utils/mount.c:722
-#, fuzzy, c-format
-msgid ""
-" --source <src> explicitly specifies source (path, label, uuid)\n"
-" --target <target> explicitly specifies mountpoint\n"
-msgstr ""
-" --source <src> 明確的指定來源 (路徑、標貼，uuid)\n"
-" --target<目標> 明確的指定 mountpoint\n"
-
-#: sys-utils/mount.c:725
-#, fuzzy, c-format
-msgid ""
-" -v, --verbose say what is being done\n"
-" -V, --version display version information and exit\n"
-" -w, --rw, --read-write mount the filesystem read-write (default)\n"
-msgstr ""
-" -v, --verbose 表示什麼正在是已完成\n"
-" -V, --version 顯示版本資訊然後離開\n"
-" -w, --read-write 掛載檔案系統可讀可寫 (預設)\n"
+msgid "Unexpected reply length from server %d"
+msgstr "未預期的回覆長度從伺服器 %d"
-#: sys-utils/mount.c:734
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Source:\n"
-" -L, --label <label> synonym for LABEL=<label>\n"
-" -U, --uuid <uuid> synonym for UUID=<uuid>\n"
-" LABEL=<label> specifies device by filesystem label\n"
-" UUID=<uuid> specifies device by filesystem UUID\n"
-" PARTLABEL=<label> specifies device by partition label\n"
-" PARTUUID=<uuid> specifies device by partition UUID\n"
-msgstr ""
-"\n"
-"來源：\n"
-" -L, --label <label> 同義字用於標貼=<標貼>\n"
-" -U, --uuid<uuid> 同義字用於 UUID=<uuid>\n"
-" 標貼=<標貼> 指定裝置由檔案系統標貼\n"
-" UUID=<uuid> 指定裝置由檔案系統 UUID\n"
-" PARTLABEL=<標貼> 指定裝置由分割標貼\n"
-" PARTUUID=<uuid> 指定裝置由分割 UUID\n"
+#: misc-utils/uuidd.c:601
+#, fuzzy
+msgid "failed to parse --cont-clock/-C"
+msgstr "剖析結束時失敗"
-#: sys-utils/mount.c:743
-#, fuzzy, c-format
-msgid ""
-" <device> specifies device by path\n"
-" <directory> mountpoint for bind mounts (see --bind/rbind)\n"
-" <file> regular file for loopdev setup\n"
-msgstr ""
-" <device> 指定裝置由路徑\n"
-"<目錄> mountpoint 用於繫結掛載 (參看 --bind/rbind)\n"
-"<檔案> 標準檔案用於 loopdev 設定\n"
+#: misc-utils/uuidd.c:652
+#, fuzzy
+msgid "failed to parse --uuids"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/mount.c:748
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Operations:\n"
-" -B, --bind mount a subtree somewhere else (same as -o bind)\n"
-" -M, --move move a subtree to some other place\n"
-" -R, --rbind mount a subtree and all submounts somewhere else\n"
-msgstr ""
-"\n"
-"計算：\n"
-" -B, --bind 掛載子樹其他地方 (如同 -o 繫結)\n"
-" -M, --move 移動子樹到某些其他置放\n"
-" -R, --rbind 掛載子樹和所有 submounts 其他地方\n"
+#: misc-utils/uuidd.c:669
+#, fuzzy
+msgid "uuidd has been built without support for socket activation"
+msgstr "uuidd 已被 built 而無需支援用於通訊端活化。\n"
-#: sys-utils/mount.c:753
-#, fuzzy, c-format
-msgid ""
-" --make-shared mark a subtree as shared\n"
-" --make-slave mark a subtree as slave\n"
-" --make-private mark a subtree as private\n"
-" --make-unbindable mark a subtree as unbindable\n"
-msgstr ""
-" --make-shared 標記子樹做為共享\n"
-" --make-slave 標記子樹做為從屬\n"
-" --make-private 標記子樹做為私人的\n"
-" --make-unbindable 標記子樹做為 unbindable\n"
+#: misc-utils/uuidd.c:688
+#, fuzzy
+msgid "failed to parse --timeout"
+msgstr "剖析大小時失敗"
-#: sys-utils/mount.c:758
+#: misc-utils/uuidd.c:729
#, fuzzy, c-format
-msgid ""
-" --make-rshared recursively mark a whole subtree as shared\n"
-" --make-rslave recursively mark a whole subtree as slave\n"
-" --make-rprivate recursively mark a whole subtree as private\n"
-" --make-runbindable recursively mark a whole subtree as unbindable\n"
-msgstr ""
-" --make-rshared 遞迴標記整個子樹做為共享\n"
-" --make-rslave 遞迴標記整個子樹做為從屬\n"
-" --make-rprivate 遞迴標記整個子樹做為私人的\n"
-" --make-runbindable 遞迴標記整個子樹做為 unbindable\n"
-
-#: sys-utils/mount.c:845 sys-utils/umount.c:539
-#, fuzzy
-msgid "libmount context allocation failed"
-msgstr "libmount 語境配額失敗"
+msgid "socket name too long: %s"
+msgstr "卷冊名稱太長"
-#: sys-utils/mount.c:902 sys-utils/umount.c:592
+#: misc-utils/uuidd.c:736
#, fuzzy
-msgid "failed to set options pattern"
-msgstr "設定選項胚騰時失敗"
+msgid "Both --socket-activation and --socket specified. Ignoring --socket."
+msgstr "兩者 --socket-activation 和 --socket 指定的。忽略 --socket\n"
-#: sys-utils/mountpoint.c:119
+#: misc-utils/uuidd.c:747 misc-utils/uuidd.c:782
#, fuzzy, c-format
-msgid ""
-" %1$s [-qd] /path/to/directory\n"
-" %1$s -x /dev/device\n"
-msgstr ""
-" %1$s [-qd]/路徑/到/目錄\n"
-" %1$s -x/dev/裝置\n"
+msgid "error calling uuidd daemon (%s)"
+msgstr "呼叫 uuidd 守護程式 (%s) 時發生錯誤：%m\n"
-#: sys-utils/mountpoint.c:123
+#: misc-utils/uuidd.c:748 misc-utils/uuidd.c:783
#, fuzzy
-msgid ""
-" -q, --quiet quiet mode - don't print anything\n"
-" -d, --fs-devno print maj:min device number of the filesystem\n"
-" -x, --devno print maj:min device number of the block device\n"
-msgstr ""
-" -q, --quiet 無訊息模式 - 不列印任何事\n"
-" -d, --fs-devno 列印 maj：最小裝置編號的檔案系統\n"
-" -x, --devno 列印 maj：最小裝置編號的區塊裝置\n"
+msgid "unexpected error"
+msgstr "%s：未預期的檔案格式"
-#: sys-utils/mountpoint.c:203
+#: misc-utils/uuidd.c:756
#, fuzzy, c-format
-msgid "%s is not a mountpoint\n"
-msgstr "%s 並非 mountpoint\n"
+msgid "%s and %d subsequent UUID\n"
+msgid_plural "%s and %d subsequent UUIDs\n"
+msgstr[0] "%s 和 %d 後續 UUID\n"
+
+#: misc-utils/uuidd.c:762
+#, c-format
+msgid "List of UUIDs:\n"
+msgstr "UUIDs 列表：\n"
-#: sys-utils/mountpoint.c:209
+#: misc-utils/uuidd.c:804
#, fuzzy, c-format
-msgid "%s is a mountpoint\n"
-msgstr "%s 是 mountpoint\n"
+msgid "couldn't kill uuidd running at pid %d"
+msgstr "無法砍除 uuidd 執行中於 pid %d：%m\n"
-#: sys-utils/nsenter.c:64 sys-utils/setpriv.c:93 sys-utils/unshare.c:42
+#: misc-utils/uuidd.c:809
#, fuzzy, c-format
-msgid " %s [options] <program> [args...]\n"
-msgstr " %s [選項] <program> [引數...]\n"
+msgid "Killed uuidd running at pid %d.\n"
+msgstr "已砍除執行於 pid %d 的 uuidd\n"
-#: sys-utils/nsenter.c:68
-msgid " -t, --target <pid> target process to get namespaces from\n"
+#: misc-utils/uuidgen.c:29
+msgid "Create a new UUID value.\n"
msgstr ""
-#: sys-utils/nsenter.c:69
-msgid " -m, --mount [=<file>] enter mount namespace\n"
-msgstr ""
+#: misc-utils/uuidgen.c:32
+#, fuzzy
+msgid " -r, --random generate random-based uuid\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
-#: sys-utils/nsenter.c:70
-msgid " -u, --uts [=<file>] enter UTS namespace (hostname etc)\n"
-msgstr ""
+#: misc-utils/uuidgen.c:33
+#, fuzzy
+msgid " -t, --time generate time-based uuid\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
-#: sys-utils/nsenter.c:71
-msgid " -i, --ipc [=<file>] enter System V IPC namespace\n"
+#: misc-utils/uuidgen.c:34
+msgid " -n, --namespace ns generate hash-based uuid in this namespace\n"
msgstr ""
-#: sys-utils/nsenter.c:72
-msgid " -n, --net [=<file>] enter network namespace\n"
-msgstr ""
+#: misc-utils/uuidgen.c:35
+#, fuzzy, c-format
+msgid " available namespaces: %s\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/nsenter.c:73
-msgid " -p, --pid [=<file>] enter pid namespace\n"
+#: misc-utils/uuidgen.c:36
+msgid " -N, --name name generate hash-based uuid from this name\n"
msgstr ""
-#: sys-utils/nsenter.c:74
+#: misc-utils/uuidgen.c:37
#, fuzzy
-msgid " -U, --user [=<file>] enter user namespace\n"
-msgstr " -s, --speed <value> 設定序列線路速度\n"
+msgid " -m, --md5 generate md5 hash\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/nsenter.c:75
+#: misc-utils/uuidgen.c:38
#, fuzzy
-msgid " -S, --setuid <uid> set uid in user namespace\n"
-msgstr " -m, --shmems 共用記憶體資料段\n"
+msgid " -s, --sha1 generate sha1 hash\n"
+msgstr " -s --shared 提取共享的鎖定\n"
-#: sys-utils/nsenter.c:76
+#: misc-utils/uuidgen.c:39
#, fuzzy
-msgid " -G, --setgid <gid> set gid in user namespace\n"
-msgstr " -m, --shmems 共用記憶體資料段\n"
+msgid " -x, --hex interpret name as hex string\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/nsenter.c:77
+#: misc-utils/uuidgen.c:53
#, fuzzy
-msgid " -r, --root [=<dir>] set the root directory\n"
-msgstr " -x, --destination <dir> 抽出進入目錄\n"
+msgid "not a valid hex string"
+msgstr "%s：不是有效的交換分割區"
-#: sys-utils/nsenter.c:78
+#: misc-utils/uuidgen.c:144
#, fuzzy
-msgid " -w, --wd [=<dir>] set the working directory\n"
-msgstr " -x, --destination <dir> 抽出進入目錄\n"
-
-#: sys-utils/nsenter.c:79
-msgid " -F, --no-fork do not fork before exec'ing <program>\n"
-msgstr ""
+msgid "--namespace requires --name argument"
+msgstr "%s 需要一個引數"
-#: sys-utils/nsenter.c:104
-#, c-format
-msgid "neither filename nor target pid supplied for %s"
+#: misc-utils/uuidgen.c:148
+msgid "--namespace requires --md5 or --sha1"
msgstr ""
-#: sys-utils/nsenter.c:244
+#: misc-utils/uuidgen.c:153
#, fuzzy
-msgid "failed to parse uid"
-msgstr "剖析 pid 時失敗"
+msgid "--name requires --namespace argument"
+msgstr "無效的前端引數"
-#: sys-utils/nsenter.c:247
+#: misc-utils/uuidgen.c:157
#, fuzzy
-msgid "failed to parse gid"
-msgstr "剖析 pid 時失敗"
+msgid "--md5 or --sha1 requires --namespace argument"
+msgstr "%s 需要一個引數"
-#: sys-utils/nsenter.c:290
+#: misc-utils/uuidgen.c:182
#, fuzzy, c-format
-msgid "reassociate to namespace '%s' failed"
-msgstr "讀取系統時間失敗"
+msgid "unknown namespace alias: '%s'"
+msgstr "不明的資源類型：%s\n"
-#: sys-utils/nsenter.c:301
-#, fuzzy
-msgid "cannot open current working directory"
-msgstr "%s：無法變更工作目錄 %s：%m"
+#: misc-utils/uuidgen.c:188
+#, fuzzy, c-format
+msgid "invalid uuid for namespace: '%s'"
+msgstr "無效的識別號：%s"
-#: sys-utils/nsenter.c:308
+#: misc-utils/uuidparse.c:76
#, fuzzy
-msgid "change directory by root file descriptor failed"
-msgstr "變更目錄到系統根失敗"
+msgid "unique identifier"
+msgstr "唯一貯藏體識別碼"
-#: sys-utils/nsenter.c:311
+#: misc-utils/uuidparse.c:77
#, fuzzy
-msgid "chroot failed"
-msgstr "掛載失敗"
+msgid "variant name"
+msgstr "分割名稱"
-#: sys-utils/nsenter.c:321
+#: misc-utils/uuidparse.c:78
#, fuzzy
-msgid "change directory by working directory file descriptor failed"
-msgstr "變更目錄到系統根失敗"
+msgid "type name"
+msgstr "使用者名稱"
-#: sys-utils/pivot_root.c:33
-#, fuzzy, c-format
-msgid " %s [options] new_root put_old\n"
-msgstr " %s [選項] new_root put_old\n"
+#: misc-utils/uuidparse.c:79
+msgid "timestamp"
+msgstr ""
-#: sys-utils/pivot_root.c:71
+#: misc-utils/uuidparse.c:97
#, fuzzy, c-format
-msgid "failed to change root from `%s' to `%s'"
-msgstr "變更根從『%s』到『%s 時失敗』"
+msgid " %s [options] <uuid ...>\n"
+msgstr " %s [選項] [<file>]\n"
-#: sys-utils/prlimit.c:70
+#: misc-utils/uuidparse.c:100
#, fuzzy
-msgid "address space limit"
-msgstr "位址空間限制"
+msgid " -J, --json use JSON output format"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/prlimit.c:71
+#: misc-utils/uuidparse.c:101
#, fuzzy
-msgid "max core file size"
-msgstr "最大記憶體檔案大小"
+msgid " -n, --noheadings don't print headings"
+msgstr " -f 不分割長列\n"
-#: sys-utils/prlimit.c:71 sys-utils/prlimit.c:74
+#: misc-utils/uuidparse.c:102
#, fuzzy
-msgid "blocks"
-msgstr "區塊"
+msgid " -o, --output <list> COLUMNS to display (see below)"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
-#: sys-utils/prlimit.c:72
+#: misc-utils/uuidparse.c:103
#, fuzzy
-msgid "CPU time"
-msgstr "CPU 時間"
+msgid " -r, --raw use the raw output format"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/prlimit.c:72
+#: misc-utils/uuidparse.c:172 misc-utils/uuidparse.c:191
+#: misc-utils/uuidparse.c:222
#, fuzzy
-msgid "seconds"
-msgstr "ç§\92"
+msgid "invalid"
+msgstr "ç\84¡æ\95\88ç\9a\84è\98å\88¥è\99\9f"
-#: sys-utils/prlimit.c:73
-#, fuzzy
-msgid "max data size"
-msgstr "最大資料大小"
+#: misc-utils/uuidparse.c:186
+msgid "other"
+msgstr ""
-#: sys-utils/prlimit.c:74
-#, fuzzy
-msgid "max file size"
-msgstr "最大檔案大小"
+#: misc-utils/uuidparse.c:197
+msgid "nil"
+msgstr ""
-#: sys-utils/prlimit.c:75
-#, fuzzy
-msgid "max number of file locks held"
-msgstr "最大檔案鎖定數量延遲"
+#: misc-utils/uuidparse.c:202
+msgid "time-based"
+msgstr ""
-#: sys-utils/prlimit.c:76
-#, fuzzy
-msgid "max locked-in-memory address space"
-msgstr "最大 locked-in-memory 位址空間"
+#: misc-utils/uuidparse.c:208
+msgid "name-based"
+msgstr ""
-#: sys-utils/prlimit.c:77
-#, fuzzy
-msgid "max bytes in POSIX mqueues"
-msgstr "最大位元組在中 POSIX mqueues"
+#: misc-utils/uuidparse.c:211
+msgid "random"
+msgstr ""
-#: sys-utils/prlimit.c:78
-#, fuzzy
-msgid "max nice prio allowed to raise"
-msgstr "最大好 prio 允許到引發"
+#: misc-utils/uuidparse.c:214
+msgid "sha1-based"
+msgstr ""
-#: sys-utils/prlimit.c:79
-#, fuzzy
-msgid "max number of open files"
-msgstr "最大開啟檔案數量"
+#: misc-utils/uuidparse.c:267 misc-utils/wipefs.c:178
+#: sys-utils/irq-common.c:156 sys-utils/irq-common.c:478 sys-utils/lscpu.c:990
+#: sys-utils/lsns.c:1146 sys-utils/zramctl.c:505
+msgid "failed to initialize output column"
+msgstr "初始化輸出欄時失敗"
-#: sys-utils/prlimit.c:80
+#: misc-utils/waitpid.c:70
+#, c-format
+msgid "PID %d has exited, skipping"
+msgstr ""
+
+#: misc-utils/waitpid.c:73
+#, fuzzy, c-format
+#| msgid "Could not open %s\n"
+msgid "could not open pid %u"
+msgstr "無法開啟 %s\n"
+
+#: misc-utils/waitpid.c:92
#, fuzzy
-msgid "max number of processes"
-msgstr "最大行程數量"
+msgid "could not create timerfd"
+msgstr "無法設定群組識別號"
-#: sys-utils/prlimit.c:81
+#: misc-utils/waitpid.c:95
#, fuzzy
-msgid "max resident set size"
-msgstr "最大常駐設定大小"
+msgid "could not set timer"
+msgstr "無法設定群組識別號"
-#: sys-utils/prlimit.c:81
+#: misc-utils/waitpid.c:111
#, fuzzy
-msgid "pages"
-msgstr "頁面"
+msgid "could not add timerfd"
+msgstr "無法設定群組識別號"
-#: sys-utils/prlimit.c:82
+#: misc-utils/waitpid.c:121
#, fuzzy
-msgid "max real-time priority"
-msgstr "最大即時優先權"
+msgid "could not add listener"
+msgstr "無法讀取 %s"
-#: sys-utils/prlimit.c:83
+#: misc-utils/waitpid.c:139
+msgid "failure during wait"
+msgstr ""
+
+#: misc-utils/waitpid.c:143
+#, c-format
+msgid "Timeout expired\n"
+msgstr ""
+
+#: misc-utils/waitpid.c:147
+#, c-format
+msgid "PID %d finished\n"
+msgstr ""
+
+#: misc-utils/waitpid.c:160
+#, fuzzy, c-format
+msgid " %s [options] pid...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: misc-utils/waitpid.c:163
#, fuzzy
-msgid "timeout for real-time tasks"
-msgstr "逾時用於即時事務"
+msgid " -v, --verbose be more verbose\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: sys-utils/prlimit.c:83
+#: misc-utils/waitpid.c:164
#, fuzzy
-msgid "microsecs"
-msgstr "microsecs"
+msgid " -t, --timeout=<timeout> wait at most timeout seconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
-#: sys-utils/prlimit.c:84
+#: misc-utils/waitpid.c:165
#, fuzzy
-msgid "max number of pending signals"
-msgstr "最大擱置信號數量"
+msgid " -e, --exited allow exited PIDs\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/prlimit.c:85
+#: misc-utils/waitpid.c:166
#, fuzzy
-msgid "max stack size"
-msgstr "最大堆疊大小"
+msgid " -c, --count=<count> number of process exits to wait for\n"
+msgstr "剖析列號的時失敗"
-#: sys-utils/prlimit.c:116
+#: misc-utils/waitpid.c:204
#, fuzzy
-msgid "resource name"
-msgstr "資源名稱"
+msgid "Could not parse timeout"
+msgstr "剖析大小時失敗"
-#: sys-utils/prlimit.c:117
+#: misc-utils/waitpid.c:210
#, fuzzy
-msgid "resource description"
-msgstr "資源描述"
+msgid "Invalid count"
+msgstr "無效的 block-count"
-#: sys-utils/prlimit.c:118
+#: misc-utils/waitpid.c:237
#, fuzzy
-msgid "soft limit"
-msgstr "軟式限制"
+msgid "no PIDs specified"
+msgstr "沒有檔案指定的"
-#: sys-utils/prlimit.c:119
-#, fuzzy
-msgid "hard limit (ceiling)"
-msgstr "強制限制 (頂符號)"
+#: misc-utils/waitpid.c:241
+#, c-format
+msgid "can't want for %zu of %zu PIDs"
+msgstr ""
-#: sys-utils/prlimit.c:120
+#: misc-utils/waitpid.c:249
#, fuzzy
-msgid "units"
-msgstr "單位"
+msgid "could not create epoll"
+msgstr "無法讀取 %s"
-#: sys-utils/prlimit.c:154
+#: misc-utils/whereis.c:205
#, fuzzy, c-format
-msgid " %s [options] [-p PID]\n"
-msgstr " %s [選項] [-p PID]\n"
+msgid " %s [options] [-BMS <dir>... -f] <name>\n"
+msgstr " %s [選項] [<file>]\n"
-#: sys-utils/prlimit.c:156
-#, fuzzy, c-format
-msgid " %s [options] COMMAND\n"
-msgstr " %s [選項] 命令\n"
+#: misc-utils/whereis.c:208
+msgid "Locate the binary, source, and manual-page files for a command.\n"
+msgstr ""
-#: sys-utils/prlimit.c:158
+#: misc-utils/whereis.c:211
#, fuzzy
-msgid ""
-"\n"
-"General Options:\n"
+msgid " -b search only for binaries\n"
+msgstr " -f 不分割長列\n"
+
+#: misc-utils/whereis.c:212
+msgid " -B <dirs> define binaries lookup path\n"
msgstr ""
-"\n"
-"一般選項：\n"
-#: sys-utils/prlimit.c:159
+#: misc-utils/whereis.c:213
#, fuzzy
-msgid ""
-" -p, --pid <pid> process id\n"
-" -o, --output <list> define which output columns to use\n"
-" --noheadings don't print headings\n"
-" --raw use the raw output format\n"
-" --verbose verbose output\n"
-" -h, --help display this help and exit\n"
-" -V, --version output version information and exit\n"
+msgid " -m search only for manuals and infos\n"
+msgstr " -f 不分割長列\n"
+
+#: misc-utils/whereis.c:214
+msgid " -M <dirs> define man and info lookup path\n"
+msgstr ""
+
+#: misc-utils/whereis.c:215
+msgid " -s search only for sources\n"
+msgstr ""
+
+#: misc-utils/whereis.c:216
+msgid " -S <dirs> define sources lookup path\n"
msgstr ""
-" -p, --pid <pid> 處理識別號\n"
-" -o, --output<清單> 定義該項輸出欄位以使用\n"
-" --noheadings 不列印標頭\n"
-" --raw 使用原始輸出格式\n"
-" --verbose 詳細的輸出\n"
-" -h, --help 顯示這份說明然後離開\n"
-" -V, --version 輸出版本資訊然後離開\n"
-#: sys-utils/prlimit.c:167
+#: misc-utils/whereis.c:217
#, fuzzy
-msgid ""
-"\n"
-"Resources Options:\n"
+msgid " -f terminate <dirs> argument list\n"
+msgstr " -n 終止命令與換列\n"
+
+#: misc-utils/whereis.c:218
+msgid " -u search for unusual entries\n"
msgstr ""
-"\n"
-"資源選項：\n"
-#: sys-utils/prlimit.c:168
+#: misc-utils/whereis.c:219
#, fuzzy
-msgid ""
-" -c, --core maximum size of core files created\n"
-" -d, --data maximum size of a process's data segment\n"
-" -e, --nice maximum nice priority allowed to raise\n"
-" -f, --fsize maximum size of files written by the process\n"
-" -i, --sigpending maximum number of pending signals\n"
-" -l, --memlock maximum size a process may lock into memory\n"
-" -m, --rss maximum resident set size\n"
-" -n, --nofile maximum number of open files\n"
-" -q, --msgqueue maximum bytes in POSIX message queues\n"
-" -r, --rtprio maximum real-time scheduling priority\n"
-" -s, --stack maximum stack size\n"
-" -t, --cpu maximum amount of CPU time in seconds\n"
-" -u, --nproc maximum number of user processes\n"
-" -v, --as size of virtual memory\n"
-" -x, --locks maximum number of file locks\n"
-" -y, --rttime CPU time in microseconds a process scheduled\n"
-" under real-time scheduling\n"
+msgid " -g interpret name as glob (pathnames pattern)\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: misc-utils/whereis.c:220
+msgid " -l output effective lookup paths\n"
msgstr ""
-" -c, --core 最大容量的記憶體檔案建立\n"
-" -d, --data 最大容量的處理資料區段\n"
-" -e, --nice 最大值好優先權允許到引發\n"
-" -f, --fsize 最大容量的檔案作者處理\n"
-" -i, --sigpending 最大值擱置信號數量\n"
-" -l, --memlock 最大容量處理也許會鎖定進入記憶體\n"
-" -m, --rss 最大值常駐設定大小\n"
-" -n, --nofile 最大值開啟檔案數量\n"
-" -q, --msgqueue 最大值位元組在中 POSIX 訊息佇列\n"
-" -r, --rtprio 最大值即時排程優先權\n"
-" -s, --stack 最大值堆疊大小\n"
-" -t, --cpu 最大值數目的 CPU 時間的秒數\n"
-" -u, --nproc 最大值使用者行程數量\n"
-" -v, --as 大小的虛擬記憶體\n"
-" -x, --locks 最大值檔案鎖定數量\n"
-" -y, --rttime CPU 時間在中 microseconds 處理已排程\n"
-" 之下即時排程\n"
-#: sys-utils/prlimit.c:236 sys-utils/prlimit.c:242 sys-utils/prlimit.c:360
-#: sys-utils/prlimit.c:365
+#: misc-utils/whereis.c:670
#, fuzzy
-msgid "unlimited"
-msgstr "無限制的"
+msgid "option -f is missing"
+msgstr "路徑名稱引數缺少"
-#: sys-utils/prlimit.c:327
-#, fuzzy, c-format
-msgid "failed to get old %s limit"
-msgstr "æ\8f\90å\8f\96è\88\8aç\9a\84 %s é\99\90å\88¶æ\99\82失æ\95\97"
+#: misc-utils/wipefs.c:109
+#, fuzzy
+msgid "partition/filesystem UUID"
+msgstr "æª\94æ¡\88系統 UUID"
-#: sys-utils/prlimit.c:351
-#, fuzzy, c-format
-msgid "the soft limit %s cannot exceed the hard limit"
-msgstr "軟式限制 %s 無法超出強制限制"
+#: misc-utils/wipefs.c:111
+msgid "magic string length"
+msgstr ""
+
+#: misc-utils/wipefs.c:112
+msgid "superblok type"
+msgstr ""
+
+#: misc-utils/wipefs.c:113
+#, fuzzy
+msgid "magic string offset"
+msgstr "不當的 inode 偏移值"
+
+#: misc-utils/wipefs.c:114
+#, fuzzy
+msgid "type description"
+msgstr "旗標描述"
+
+#: misc-utils/wipefs.c:115
+#, fuzzy
+msgid "block device name"
+msgstr "區塊裝置 "
+
+#: misc-utils/wipefs.c:310
+#, fuzzy
+msgid "partition-table"
+msgstr "分割標貼"
+
+#: misc-utils/wipefs.c:401
+#, c-format
+msgid "error: %s: probing initialization failed"
+msgstr "錯誤：%s：試探初始化時失敗"
-#: sys-utils/prlimit.c:358
+#: misc-utils/wipefs.c:452
#, fuzzy, c-format
-msgid "New %s limit: "
-msgstr "新 %s 限制："
+msgid "%s: failed to erase %s magic string at offset 0x%08jx"
+msgstr "%s：無法清除 %s 魔術字串於偏移 0x%08 jx"
-#: sys-utils/prlimit.c:372
+#: misc-utils/wipefs.c:458
#, fuzzy, c-format
-msgid "failed to set the %s resource limit"
-msgstr "設定 %s 資源限制時失敗"
+msgid "%s: %zd byte was erased at offset 0x%08jx (%s): "
+msgid_plural "%s: %zd bytes were erased at offset 0x%08jx (%s): "
+msgstr[0] "%s：%zd 位元組被清除於偏移 0x%08 jx (%s)："
-#: sys-utils/prlimit.c:373
+#: misc-utils/wipefs.c:487
#, fuzzy, c-format
-msgid "failed to get the %s resource limit"
-msgstr "提取 %s 資源限制時失敗"
+msgid "%s: failed to create a signature backup"
+msgstr "%s：無法寫入簽名頁面"
-#: sys-utils/prlimit.c:450
+#: misc-utils/wipefs.c:513
#, fuzzy, c-format
-msgid "failed to parse %s limit"
-msgstr "å\89\96æ\9e\90 %s é\99\90å\88¶æ\99\82失æ\95\97"
+msgid "%s: calling ioctl to re-read partition table: %m\n"
+msgstr "å\91¼å\8f« ioctl() 以é\87\8dæ\96°è®\80å\8f\96å\88\86å\89²è¡¨ã\80\82\n"
-#: sys-utils/prlimit.c:579
-#, fuzzy
-msgid "option --pid may be specified only once"
-msgstr "選項 --pid 也許會被指定的只一次"
+#: misc-utils/wipefs.c:542
+msgid "failed to create a signature backup, $HOME undefined"
+msgstr ""
-#: sys-utils/prlimit.c:610
-#, fuzzy
-msgid "options --pid and COMMAND are mutually exclusive"
-msgstr "選項 --pid 和命令彼此互斥"
+#: misc-utils/wipefs.c:560
+#, c-format
+msgid "%s: ignoring nested \"%s\" partition table on non-whole disk device"
+msgstr ""
-#: sys-utils/readprofile.c:108
+#: misc-utils/wipefs.c:589
#, fuzzy, c-format
-msgid " -m, --mapfile <mapfile> (defaults: \"%s\" and\n"
-msgstr " -m, --mapfile <mapfile> (預設值：「%s」和\n"
+msgid "%s: offset 0x%jx not found"
+msgstr "%s：找不到偏移 0x%jx "
-#: sys-utils/readprofile.c:110
-#, fuzzy, c-format
-msgid " \"%s\")\n"
-msgstr " 「%s」)\n"
+#: misc-utils/wipefs.c:594
+#, fuzzy
+msgid "Use the --force option to force erase."
+msgstr "使用 --force 旗標以駁回所有檢查。\n"
-#: sys-utils/readprofile.c:112
+#: misc-utils/wipefs.c:597
#, fuzzy, c-format
-msgid " -p, --profile <pro-file> (default: \"%s\")\n"
-msgstr " -p, --profile <pro-file> (預設：「%s」)\n"
+msgid "%s: cannot flush modified buffers"
+msgstr "%s：無法 fflush 變更：%s"
-#: sys-utils/readprofile.c:113
+#: misc-utils/wipefs.c:636
#, fuzzy
-msgid " -M, --multiplier <mult> set the profiling multiplier to <mult>\n"
-msgstr " -M, --multiplier <mult> 設定側寫檔倍數到<mult>\n"
+msgid "Wipe signatures from a device."
+msgstr "%s：寫入簽章時失敗"
-#: sys-utils/readprofile.c:114
+#: misc-utils/wipefs.c:639
#, fuzzy
-msgid " -i, --info print only info about the sampling step\n"
-msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+msgid " -a, --all wipe all magic strings (BE CAREFUL!)"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/readprofile.c:115
+#: misc-utils/wipefs.c:640
#, fuzzy
-msgid " -v, --verbose print verbose data\n"
-msgstr " -v, --verbose 列印詳細的資料\n"
+msgid " -b, --backup create a signature backup in $HOME"
+msgstr "%s：無法寫入簽名頁面"
-#: sys-utils/readprofile.c:116
+#: misc-utils/wipefs.c:641
#, fuzzy
-msgid " -a, --all print all symbols, even if count is 0\n"
-msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+msgid " -f, --force force erasure"
+msgstr " -f 強制檢查\n"
-#: sys-utils/readprofile.c:117
+#: misc-utils/wipefs.c:642
#, fuzzy
-msgid " -b, --histbin print individual histogram-bin counts\n"
-msgstr " -b, --histbin 列印個別 histogram-bin 計數\n"
+msgid " -i, --noheadings don't print headings"
+msgstr " -f 不分割長列\n"
-#: sys-utils/readprofile.c:118
+#: misc-utils/wipefs.c:643
#, fuzzy
-msgid " -s, --counters print individual counters within functions\n"
-msgstr " -s, --counters 列印個別計數器在之內函式\n"
+msgid " -J, --json use JSON output format"
+msgstr " -V, --version 輸出版本資訊\n"
-#: sys-utils/readprofile.c:119
+#: misc-utils/wipefs.c:644
#, fuzzy
-msgid " -r, --reset reset all the counters (root only)\n"
-msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+msgid " -n, --no-act do everything except the actual write() call"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/readprofile.c:120
+#: misc-utils/wipefs.c:645
#, fuzzy
-msgid " -n, --no-auto disable byte order auto-detection\n"
-msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
+msgid " -o, --offset <num> offset to erase, in bytes"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/readprofile.c:237
-#, fuzzy, c-format
-msgid "error writing %s"
-msgstr "寫入 %s 時發生錯誤"
+#: misc-utils/wipefs.c:646
+msgid " -O, --output <list> COLUMNS to display (see below)"
+msgstr ""
-#: sys-utils/readprofile.c:268
+#: misc-utils/wipefs.c:647
#, fuzzy
-msgid "Assuming reversed byte order. Use -n to force native byte order."
-msgstr "假設反向的位元組次序。使用 -n 到強制原生位元組次序。"
+msgid " -p, --parsable print out in parsable instead of printable format"
+msgstr " -a, --all 查詢所有原始裝置\n"
-#: sys-utils/readprofile.c:283
-#, c-format
-msgid "Sampling_step: %i\n"
-msgstr "取樣率：%i\n"
+#: misc-utils/wipefs.c:648
+#, fuzzy
+msgid " -q, --quiet suppress output messages"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: sys-utils/readprofile.c:299 sys-utils/readprofile.c:320
-#, fuzzy, c-format
-msgid "%s(%i): wrong map line"
-msgstr "%s(%i)：錯誤的映射列"
+#: misc-utils/wipefs.c:649
+#, fuzzy
+msgid " -t, --types <list> limit the set of filesystem, RAIDs or partition tables"
+msgstr " l 列出已知檔案系統類型"
-#: sys-utils/readprofile.c:310
+#: misc-utils/wipefs.c:651
#, fuzzy, c-format
-msgid "can't find \"_stext\" in %s"
-msgstr "找不到「stext」在中 %s(_S)"
+msgid " --lock[=<mode>] use exclusive device lock (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: sys-utils/readprofile.c:343
+#: misc-utils/wipefs.c:770
#, fuzzy
-msgid "profile address out of range. Wrong map file?"
-msgstr "側寫檔位址超出範圍。錯誤的映射檔案？"
-
-#: sys-utils/readprofile.c:401
-msgid "total"
-msgstr "總計"
+msgid "The --backup option is meaningless in this context"
+msgstr "選項 --offset 未被允許在中這個語境。"
-#: sys-utils/renice.c:57
-#, fuzzy, c-format
-msgid ""
-" %1$s [-n] <priority> [-p|--pid] <pid>...\n"
-" %1$s [-n] <priority> -g|--pgrp <pgid>...\n"
-" %1$s [-n] <priority> -u|--user <user>...\n"
+#: schedutils/chrt.c:60
+msgid "Show or change the real-time scheduling attributes of a process.\n"
msgstr ""
-" %1$s [-n] <priority> [-p]<pid>[<pid>...]\n"
-" %1$s [-n]<優先權> -g<pgrp>[<pgrp>...]\n"
-" %1$s [-n]<優先權> -u<使用者>[<使用者>...]\n"
-#: sys-utils/renice.c:63
-#, fuzzy
-msgid ""
-" -g, --pgrp <id> interpret argument as process group ID\n"
-" -n, --priority <num> specify the nice increment value\n"
-" -p, --pid <id> interpret argument as process ID (default)\n"
-" -u, --user <name|id> interpret argument as username or user ID\n"
-" -h, --help display help text and exit\n"
-" -V, --version display version information and exit\n"
-msgstr ""
-" -g, --pgrp <id> 解譯做為處理群組識別號\n"
-" -h, --help 列印說明\n"
-" -n, --priority<num> 設定好遞增值\n"
-" -p, --pid<識別號> 強制為解譯的做為處理識別號\n"
-" -u, --user<名稱|識別號> 解譯做為使用者名稱或使用者識別號\n"
-" -v, --version 印出版本\n"
-
-#: sys-utils/renice.c:70
+#: schedutils/chrt.c:62
#, fuzzy
msgid ""
-"\n"
-"For more information see renice(1).\n"
+"Set policy:\n"
+" chrt [options] <priority> <command> [<arg>...]\n"
+" chrt [options] --pid <priority> <pid>\n"
msgstr ""
"\n"
-"要獲得更多資訊請參看 renice (1)。\n"
+" chrt - 操控行程的即時屬性\n"
+"\n"
+"設定策略：\n"
+" chrt [選項] <policy> <priority> {<pid> |<command> [<arg>...]}\n"
+"\n"
+"取得策略：\n"
+" chrt [選項] {<pid> | <command> [<arg>...]}\n"
-#: sys-utils/renice.c:140
-#, fuzzy, c-format
-msgid "unknown user %s"
-msgstr "不明使用者 %s"
+#: schedutils/chrt.c:66
+msgid ""
+"Get policy:\n"
+" chrt [options] -p <pid>\n"
+msgstr ""
-#: sys-utils/renice.c:148
-#, fuzzy, c-format
-msgid "bad value %s"
-msgstr "不當的值 %s"
+#: schedutils/chrt.c:70
+#, fuzzy
+msgid "Policy options:\n"
+msgstr "資源選項：\n"
-#: sys-utils/renice.c:161
+#: schedutils/chrt.c:71
#, fuzzy
-msgid "process ID"
-msgstr "處理識別號"
+msgid " -b, --batch set policy to SCHED_BATCH\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/renice.c:164
+#: schedutils/chrt.c:72
#, fuzzy
-msgid "user ID"
-msgstr "使用者識別號"
+msgid " -d, --deadline set policy to SCHED_DEADLINE\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/renice.c:166
+#: schedutils/chrt.c:73
#, fuzzy
-msgid "process group ID"
-msgstr "處理群組識別號"
+msgid " -f, --fifo set policy to SCHED_FIFO\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/renice.c:171 sys-utils/renice.c:181
-#, fuzzy, c-format
-msgid "failed to get priority for %d (%s)"
-msgstr "提取優先權用於 %d (%s) 時失敗"
+#: schedutils/chrt.c:74
+#, fuzzy
+msgid " -i, --idle set policy to SCHED_IDLE\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/renice.c:175
-#, fuzzy, c-format
-msgid "failed to set priority for %d (%s)"
-msgstr "設定優先權用於 %d (%s) 時失敗"
+#: schedutils/chrt.c:75
+#, fuzzy
+msgid " -o, --other set policy to SCHED_OTHER\n"
+msgstr " -o, --oddparity 設定同位到奇數\n"
-#: sys-utils/renice.c:185
-#, fuzzy, c-format
-msgid "%d (%s) old priority %d, new priority %d\n"
-msgstr "%d (%s) 舊的優先權 %d，新優先權 %d\n"
-
-#: sys-utils/rtcwake.c:75
+#: schedutils/chrt.c:76
#, fuzzy
-msgid ""
-" -a, --auto reads the clock mode from adjust file (default)\n"
-msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
-
-#: sys-utils/rtcwake.c:77
-#, fuzzy, c-format
-msgid ""
-" -A, --adjfile <file> specifies the path to the adjust file\n"
-" the default is %s\n"
-msgstr ""
-" --noadjfile 不存取 %s；這個需求使用的\n"
-" 還是 --utc 或 --localtime\n"
-" --adjfile <file> 指定路徑到調整檔案；\n"
-" 預設是 %s\n"
-
-#: sys-utils/rtcwake.c:79
-msgid " -d, --device <device> select rtc device (rtc0|rtc1|...)\n"
-msgstr ""
-
-#: sys-utils/rtcwake.c:80
-msgid " -n, --dry-run does everything, but suspend\n"
-msgstr ""
+msgid " -r, --rr set policy to SCHED_RR (default)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
-#: sys-utils/rtcwake.c:81
+#: schedutils/chrt.c:79
#, fuzzy
-msgid " -l, --local RTC uses local timezone\n"
-msgstr " -V, --version 輸出版本資訊\n"
+msgid "Scheduling options:\n"
+msgstr "輸出格式：\n"
-#: sys-utils/rtcwake.c:82
-msgid " -m, --mode <mode> standby|mem|... sleep mode\n"
+#: schedutils/chrt.c:80
+#, fuzzy
+msgid " -R, --reset-on-fork set reset-on-fork flag\n"
msgstr ""
+"\n"
+"排程旗標：\n"
+" -R | --reset-on-fork 設定 SCHED_RESET_ON_FORK 用於 FIFO 或 RR\n"
-#: sys-utils/rtcwake.c:83
-msgid " -s, --seconds <seconds> seconds to sleep\n"
+#: schedutils/chrt.c:81
+msgid " -T, --sched-runtime <ns> runtime parameter for DEADLINE\n"
msgstr ""
-#: sys-utils/rtcwake.c:84
-msgid " -t, --time <time_t> time to wake\n"
+#: schedutils/chrt.c:82
+msgid " -P, --sched-period <ns> period parameter for DEADLINE\n"
msgstr ""
-#: sys-utils/rtcwake.c:85
-#, fuzzy
-msgid " -u, --utc RTC uses UTC\n"
-msgstr " -r, --reset 重置通訊埠\n"
-
-#: sys-utils/rtcwake.c:86
-#, fuzzy
-msgid " -v, --verbose verbose messages\n"
-msgstr " -v, --verbose 列印詳細的資料\n"
-
-#: sys-utils/rtcwake.c:143
-#, fuzzy
-msgid "read rtc time failed"
-msgstr "讀取 rtc 時間失敗"
-
-#: sys-utils/rtcwake.c:148
-#, fuzzy
-msgid "read system time failed"
-msgstr "讀取系統時間失敗"
+#: schedutils/chrt.c:83
+msgid " -D, --sched-deadline <ns> deadline parameter for DEADLINE\n"
+msgstr ""
-#: sys-utils/rtcwake.c:166
+#: schedutils/chrt.c:86
#, fuzzy
-msgid "convert rtc time failed"
-msgstr "è½\89æ\8f\9b rtc æ\99\82é\96\93失æ\95\97"
+msgid "Other options:\n"
+msgstr "輸å\87ºæ ¼å¼\8fï¼\9a\n"
-#: sys-utils/rtcwake.c:226
-#, fuzzy
-msgid "set rtc alarm failed"
-msgstr "設定 rtc 警示失敗"
+#: schedutils/chrt.c:87 schedutils/uclampset.c:66
+msgid " -a, --all-tasks operate on all the tasks (threads) for a given pid\n"
+msgstr ""
-#: sys-utils/rtcwake.c:230
+#: schedutils/chrt.c:88
#, fuzzy
-msgid "enable rtc alarm failed"
-msgstr "啟用 rtc 警示失敗"
+msgid " -m, --max show min and max valid priorities\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: sys-utils/rtcwake.c:234
+#: schedutils/chrt.c:89
#, fuzzy
-msgid "set rtc wake alarm failed"
-msgstr "設定 rtc 喚醒警示失敗"
+msgid " -p, --pid operate on existing given pid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/rtcwake.c:337
+#: schedutils/chrt.c:90 schedutils/uclampset.c:70
#, fuzzy
-msgid "read rtc alarm failed"
-msgstr "讀取 rtc 警示失敗"
+msgid " -v, --verbose display status information\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/rtcwake.c:343
-#, fuzzy, c-format
-msgid "alarm: off\n"
-msgstr "警示：關閉\n"
+#: schedutils/chrt.c:153 schedutils/chrt.c:175
+#, c-format
+msgid "failed to get pid %d's policy"
+msgstr "取得 pid %d 的策略時失敗"
-#: sys-utils/rtcwake.c:360
-#, fuzzy
-msgid "convert time failed"
-msgstr "轉換時間失敗"
+#: schedutils/chrt.c:178
+#, c-format
+msgid "failed to get pid %d's attributes"
+msgstr "取得 pid %d 的屬性時失敗"
-#: sys-utils/rtcwake.c:367
+#: schedutils/chrt.c:188
#, fuzzy, c-format
-msgid "alarm: on %s"
-msgstr "警示：於 %s"
+msgid "pid %d's new scheduling policy: %s"
+msgstr "pid %d 新的排程策略："
-#: sys-utils/rtcwake.c:445
+#: schedutils/chrt.c:190
#, fuzzy, c-format
-msgid "unrecognized suspend state '%s'"
-msgstr "無法辨識的懸置狀態『%s』"
-
-#: sys-utils/rtcwake.c:455
-#, fuzzy
-msgid "invalid seconds argument"
-msgstr "無效的秒引數"
-
-#: sys-utils/rtcwake.c:462
-#, fuzzy
-msgid "invalid time argument"
-msgstr "無效的時間引數"
+msgid "pid %d's current scheduling policy: %s"
+msgstr "pid %d 目前的排程策略："
-#: sys-utils/rtcwake.c:487
+#: schedutils/chrt.c:197
#, c-format
-msgid "%s: assuming RTC uses UTC ...\n"
-msgstr "%s：假設 RTC 使用 UTC …\n"
+msgid "pid %d's new scheduling priority: %d\n"
+msgstr "pid %d 新的排程優先權：%d\n"
-#: sys-utils/rtcwake.c:493
+#: schedutils/chrt.c:199
#, c-format
-msgid "Using UTC time.\n"
-msgstr "使用 UTC 時間。\n"
+msgid "pid %d's current scheduling priority: %d\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
-#: sys-utils/rtcwake.c:494
+#: schedutils/chrt.c:204
#, c-format
-msgid "Using local time.\n"
-msgstr "使用當地時間。\n"
-
-#: sys-utils/rtcwake.c:499
-#, fuzzy
-msgid "must provide wake time (see -t and -s options)"
-msgstr "必須提供喚醒時間 (參看 -t 和 -s 選項)"
+msgid "pid %d's new runtime/deadline/period parameters: %ju/%ju/%ju\n"
+msgstr ""
-#: sys-utils/rtcwake.c:516
+#: schedutils/chrt.c:207
#, fuzzy, c-format
-msgid "%s not enabled for wakeup events"
-msgstr "%s 未啟用用於 wakeup 事件"
-
-#: sys-utils/rtcwake.c:531
-#, c-format
-msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
-msgstr "警示 %ld，系統時間 %ld，rtc 時間 %ld，秒數 %u\n"
+msgid "pid %d's current runtime/deadline/period parameters: %ju/%ju/%ju\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
-#: sys-utils/rtcwake.c:537
-#, fuzzy, c-format
-msgid "suspend to \"%s\" unavailable"
-msgstr "懸置到「%s」不得使用"
+#: schedutils/chrt.c:227 schedutils/chrt.c:331 schedutils/chrt.c:339
+#: schedutils/uclampset.c:142 schedutils/uclampset.c:184
+#, fuzzy
+msgid "cannot obtain the list of tasks"
+msgstr "無法得到事務清單的"
-#: sys-utils/rtcwake.c:545
+#: schedutils/chrt.c:257
#, fuzzy, c-format
-msgid "time doesn't go backward to %s"
-msgstr "時間不前往退一步到 %s"
+msgid "%s min/max priority\t: %d/%d\n"
+msgstr "SCHED_%s 最小/最大優先權\t：%d/%d\n"
-#: sys-utils/rtcwake.c:555
+#: schedutils/chrt.c:260
#, fuzzy, c-format
-msgid "%s: wakeup using %s at %s"
-msgstr "%s：wakeup 使用 %s 於 %s"
+msgid "%s not supported?\n"
+msgstr "SCHED_%s 不被支援？\n"
-#: sys-utils/rtcwake.c:559
+#: schedutils/chrt.c:335
#, fuzzy, c-format
-msgid "%s: wakeup from \"%s\" using %s at %s"
-msgstr "%s：wakeup 從「%s」使用 %s 於 %s"
-
-#: sys-utils/rtcwake.c:568
-#, c-format
-msgid "suspend mode: no; leaving\n"
-msgstr "懸置模式：無；離開\n"
-
-#: sys-utils/rtcwake.c:576
-#, c-format
-msgid "suspend mode: off; executing %s\n"
-msgstr "懸置模式：關閉；執行 %s\n"
+msgid "failed to set tid %d's policy"
+msgstr "設定 tid %d's 策略時失敗"
-#: sys-utils/rtcwake.c:595
+#: schedutils/chrt.c:342
#, c-format
-msgid "suspend mode: on; reading rtc\n"
-msgstr "懸置模式：開啟；讀取 rtc\n"
+msgid "failed to set pid %d's policy"
+msgstr "設定 pid %d 的策略時失敗"
-#: sys-utils/rtcwake.c:601
+#: schedutils/chrt.c:422
#, fuzzy
-msgid "rtc read failed"
-msgstr "rtc 讀取失敗"
-
-#: sys-utils/rtcwake.c:612
-#, c-format
-msgid "suspend mode: disable; disabling alarm\n"
-msgstr "懸置模式：停用；停用警示\n"
-
-#: sys-utils/rtcwake.c:616
-#, fuzzy, c-format
-msgid "suspend mode: show; printing alarm info\n"
-msgstr "懸置模式：顯示；列印警示資訊\n"
-
-#: sys-utils/rtcwake.c:623
-#, c-format
-msgid "suspend mode: %s; suspending system\n"
-msgstr "懸置模式：%s；懸置系統\n"
+msgid "invalid runtime argument"
+msgstr "無效的時間引數"
-#: sys-utils/rtcwake.c:636 sys-utils/rtcwake.c:642
+#: schedutils/chrt.c:425
#, fuzzy
-msgid "disable rtc alarm interrupt failed"
-msgstr "停用 rtc 警示插斷失敗"
-
-#: sys-utils/setarch.c:52
-#, c-format
-msgid "Switching on %s.\n"
-msgstr "切換於 %s。\n"
+msgid "invalid period argument"
+msgstr "無效的速度引數"
-#: sys-utils/setarch.c:94
-#, fuzzy, c-format
-msgid " %s%s [options] [program [program arguments]]\n"
-msgstr " %s%s [選項] [程式 [程式引數]]\n"
+#: schedutils/chrt.c:428
+#, fuzzy
+msgid "invalid deadline argument"
+msgstr "無效的前端引數"
-#: sys-utils/setarch.c:99
+#: schedutils/chrt.c:453
#, fuzzy
-msgid " -v, --verbose says what options are being switched on\n"
-msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+msgid "invalid priority argument"
+msgstr "無效的優先權引數"
-#: sys-utils/setarch.c:100
-msgid ""
-" -R, --addr-no-randomize disables randomization of the virtual address "
-"space\n"
+#: schedutils/chrt.c:457
+msgid "--sched-{runtime,deadline,period} options are supported for SCHED_DEADLINE only"
msgstr ""
-#: sys-utils/setarch.c:101
-msgid ""
-" -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
-msgstr ""
+#: schedutils/chrt.c:472
+#, fuzzy
+msgid "SCHED_DEADLINE is unsupported"
+msgstr "SCHED_%s 不被支援？\n"
-#: sys-utils/setarch.c:102
-msgid " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
+#: schedutils/chrt.c:479
+#, c-format
+msgid "unsupported priority value for the policy: %d: see --max for valid range"
msgstr ""
-#: sys-utils/setarch.c:103
-msgid " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
-msgstr ""
+#: schedutils/ionice.c:78
+msgid "ioprio_get failed"
+msgstr "ioprio_get 失敗"
-#: sys-utils/setarch.c:104
-msgid " -X, --read-implies-exec turns on READ_IMPLIES_EXEC\n"
-msgstr ""
+#: schedutils/ionice.c:87
+#, fuzzy, c-format
+msgid "%s: prio %lu\n"
+msgstr "%s：選項 "
-#: sys-utils/setarch.c:105
-msgid " -B, --32bit turns on ADDR_LIMIT_32BIT\n"
-msgstr ""
+#: schedutils/ionice.c:100
+msgid "ioprio_set failed"
+msgstr "ioprio_set 失敗"
-#: sys-utils/setarch.c:106
-msgid " -I, --short-inode turns on SHORT_INODE\n"
+#: schedutils/ionice.c:107
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] -p <pid>...\n"
+" %1$s [options] -P <pgid>...\n"
+" %1$s [options] -u <uid>...\n"
+" %1$s [options] <command>\n"
msgstr ""
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
-#: sys-utils/setarch.c:107
-msgid " -S, --whole-seconds turns on WHOLE_SECONDS\n"
+#: schedutils/ionice.c:113
+msgid "Show or change the I/O-scheduling class and priority of a process.\n"
msgstr ""
-#: sys-utils/setarch.c:108
-msgid " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
+#: schedutils/ionice.c:116
+msgid ""
+" -c, --class <class> name or number of scheduling class,\n"
+" 0: none, 1: realtime, 2: best-effort, 3: idle\n"
msgstr ""
-#: sys-utils/setarch.c:109
+#: schedutils/ionice.c:118
msgid ""
-" -3, --3gb limits the used address space to a maximum of 3 "
-"GB\n"
+" -n, --classdata <num> priority (0..7) in the specified scheduling class,\n"
+" only for the realtime and best-effort classes\n"
msgstr ""
-#: sys-utils/setarch.c:110
-msgid " --4gb ignored (for backward compatibility only)\n"
+#: schedutils/ionice.c:120
+msgid " -p, --pid <pid>... act on these already running processes\n"
msgstr ""
-#: sys-utils/setarch.c:111
-msgid " --uname-2.6 turns on UNAME26\n"
+#: schedutils/ionice.c:121
+msgid " -P, --pgid <pgrp>... act on already running processes in these groups\n"
msgstr ""
-#: sys-utils/setarch.c:112
-msgid " --list list settable architectures, and exit\n"
-msgstr ""
+#: schedutils/ionice.c:122
+#, fuzzy
+msgid " -t, --ignore ignore failures\n"
+msgstr " -u --unlock 移除鎖定\n"
-#: sys-utils/setarch.c:126
-#, fuzzy, c-format
-msgid ""
-"%s\n"
-"Try `%s --help' for more information."
+#: schedutils/ionice.c:123
+msgid " -u, --uid <uid>... act on already running processes owned by these users\n"
msgstr ""
-"%s\n"
-"嘗試『%s --help』以獲得更多資訊。"
-
-#: sys-utils/setarch.c:128
-#, fuzzy, c-format
-msgid "Try `%s --help' for more information."
-msgstr "嘗試『%s --help』以獲得更多資訊。"
-
-#: sys-utils/setarch.c:212 sys-utils/setarch.c:227
-#, c-format
-msgid "%s: Unrecognized architecture"
-msgstr "%s：無法辨識的架構"
-
-#: sys-utils/setarch.c:268 sys-utils/setarch.c:274
-msgid "Not enough arguments"
-msgstr "引數不足"
-
-#: sys-utils/setarch.c:290 sys-utils/setarch.c:351
-#, c-format
-msgid "Failed to set personality to %s"
-msgstr "設定身分為 %s 時失敗"
-#: sys-utils/setpriv.c:95
+#: schedutils/ionice.c:159
#, fuzzy
-msgid ""
-" -d, --dump show current state (and do not exec anything)\n"
-msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+msgid "invalid class data argument"
+msgstr "無效的類別資料引數"
-#: sys-utils/setpriv.c:96
-msgid " --nnp, --no-new-privs disallow granting new privileges\n"
-msgstr ""
+#: schedutils/ionice.c:165
+#, fuzzy
+msgid "invalid class argument"
+msgstr "無效的類別引數"
-#: sys-utils/setpriv.c:97
-msgid " --inh-caps <caps,...> set inheritable capabilities\n"
-msgstr ""
+#: schedutils/ionice.c:170
+#, fuzzy, c-format
+msgid "unknown scheduling class: '%s'"
+msgstr "不明排程類別：『%s』"
-#: sys-utils/setpriv.c:98
-msgid " --bounding-set <caps> set capability bounding set\n"
+#: schedutils/ionice.c:178 schedutils/ionice.c:186 schedutils/ionice.c:194
+msgid "can handle only one of pid, pgid or uid at once"
msgstr ""
-#: sys-utils/setpriv.c:99
-#, fuzzy
-msgid " --ruid <uid> set real uid\n"
-msgstr " -i, --irq <num> 指定並列埠 irq\n"
-
-#: sys-utils/setpriv.c:100
+#: schedutils/ionice.c:187
#, fuzzy
-msgid " --euid <uid> set effective uid\n"
-msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+msgid "invalid PGID argument"
+msgstr "無效的 PID 引數"
-#: sys-utils/setpriv.c:101
+#: schedutils/ionice.c:195
#, fuzzy
-msgid " --rgid <gid> set real gid\n"
-msgstr " -i, --irq <num> 指定並列埠 irq\n"
-
-#: sys-utils/setpriv.c:102
-msgid " --egid <gid> set effective gid\n"
-msgstr ""
+msgid "invalid UID argument"
+msgstr "無效的 TID 引數"
-#: sys-utils/setpriv.c:103
-msgid " --reuid <uid> set real and effective uid\n"
-msgstr ""
+#: schedutils/ionice.c:214
+msgid "ignoring given class data for none class"
+msgstr "忽略給定的無類別資料"
-#: sys-utils/setpriv.c:104
-msgid " --regid <gid> set real and effective gid\n"
-msgstr ""
+#: schedutils/ionice.c:222
+msgid "ignoring given class data for idle class"
+msgstr "忽略給定的閒置類別資料"
-#: sys-utils/setpriv.c:105
-msgid " --clear-groups clear supplementary groups\n"
-msgstr ""
+#: schedutils/ionice.c:227
+#, fuzzy, c-format
+msgid "unknown prio class %d"
+msgstr "不明 prio 類別 %d"
-#: sys-utils/setpriv.c:106
-msgid " --keep-groups keep supplementary groups\n"
+#: schedutils/taskset.c:56
+#, c-format
+msgid ""
+"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
+"\n"
msgstr ""
+"用法：%s [選項] [遮罩| cpu-list] [pid|cmd [引數...]]\n"
+"\n"
-#: sys-utils/setpriv.c:107
-msgid " --groups <group,...> set supplementary groups\n"
+#: schedutils/taskset.c:60
+msgid "Show or change the CPU affinity of a process.\n"
msgstr ""
-#: sys-utils/setpriv.c:108
-#, fuzzy
-msgid " --securebits <bits> set securebits\n"
-msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
-
-#: sys-utils/setpriv.c:109
+#: schedutils/taskset.c:64
+#, fuzzy, c-format
msgid ""
-" --selinux-label <label> set SELinux label (requires process:transition)\n"
+"Options:\n"
+" -a, --all-tasks operate on all the tasks (threads) for a given pid\n"
+" -p, --pid operate on existing given pid\n"
+" -c, --cpu-list display and specify cpus in list format\n"
msgstr ""
+"選項：\n"
+" -a, --all-tasks 作用於所有事務 (執行緒) 用於給定的 pid\n"
+" -p, --pid 作用於現有給定的 pid\n"
+" -c, --cpu-list 顯示和指定 cpus 在中清單格式\n"
+" -h, --help 顯示這份說明\n"
+" -V, --version 輸出版本資訊\n"
+"\n"
-#: sys-utils/setpriv.c:110
+#: schedutils/taskset.c:73
+#, c-format
msgid ""
-" --apparmor-profile <pr> set AppArmor profile (requires onexec permission)\n"
-msgstr ""
-
-#: sys-utils/setpriv.c:115
-msgid " This tool can be dangerous. Read the manpage, and be careful.\n"
-msgstr ""
-
-#: sys-utils/setpriv.c:187 sys-utils/setpriv.c:459
-msgid "getting process secure bits failed"
+"The default behavior is to run a new command:\n"
+" %1$s 03 sshd -b 1024\n"
+"You can retrieve the mask of an existing task:\n"
+" %1$s -p 700\n"
+"Or set it:\n"
+" %1$s -p 03 700\n"
+"List format uses a comma-separated list instead of a mask:\n"
+" %1$s -pc 0,3,7-11 700\n"
+"Ranges in list format can take a stride argument:\n"
+" e.g. 0-31:2 is equivalent to mask 0x55555555\n"
msgstr ""
+"預設行為是執行新的命令：\n"
+" %1$s 03 sshd -b 1024\n"
+"您可以取回現有任務的遮罩：\n"
+" %1$s -p 700\n"
+"或設定它：\n"
+" %1$s -p 03 700\n"
+"清單格式使用以逗號分隔的清單以代替遮罩：\n"
+" %1$s -pc 0,3,7-11 700\n"
+"清單格式中的範圍可以加上一個跨越引數：\n"
+" 例如：0-31:2 相當於遮罩 0x55555555\n"
-#: sys-utils/setpriv.c:191
+#: schedutils/taskset.c:95
#, c-format
-msgid "Securebits: "
-msgstr ""
+msgid "pid %d's new affinity list: %s\n"
+msgstr "pid %d 新的近似者清單：%s\n"
-#: sys-utils/setpriv.c:211
-#, fuzzy, c-format
-msgid "[none]\n"
-msgstr "無"
+#: schedutils/taskset.c:96
+#, c-format
+msgid "pid %d's current affinity list: %s\n"
+msgstr "pid %d 目前的近似者清單：%s\n"
-#: sys-utils/setpriv.c:237
-#, fuzzy, c-format
-msgid "%s: too long"
-msgstr "列太長"
+#: schedutils/taskset.c:99
+#, c-format
+msgid "pid %d's new affinity mask: %s\n"
+msgstr "pid %d 新的近似者遮罩：%s\n"
-#: sys-utils/setpriv.c:264
+#: schedutils/taskset.c:100
#, c-format
-msgid "Supplementary groups: "
-msgstr ""
+msgid "pid %d's current affinity mask: %s\n"
+msgstr "pid %d 目前的近似者遮罩：%s\n"
-#: sys-utils/setpriv.c:266 sys-utils/setpriv.c:313 sys-utils/setpriv.c:318
-#: sys-utils/setpriv.c:324 sys-utils/setpriv.c:329
-#, fuzzy, c-format
-msgid "[none]"
-msgstr "無"
+#: schedutils/taskset.c:104
+#, fuzzy
+msgid "internal error: conversion from cpuset to string failed"
+msgstr "轉換從 cpuset 到字串失敗"
-#: sys-utils/setpriv.c:285
+#: schedutils/taskset.c:113
#, c-format
-msgid "uid: %u\n"
-msgstr ""
+msgid "failed to set pid %d's affinity"
+msgstr "設定 pid %d 的近似者時失敗"
-#: sys-utils/setpriv.c:286
+#: schedutils/taskset.c:114
#, c-format
-msgid "euid: %u\n"
-msgstr ""
+msgid "failed to get pid %d's affinity"
+msgstr "取得 pid %d 的近似者時失敗"
-#: sys-utils/setpriv.c:289
-#, c-format
-msgid "suid: %u\n"
+#: schedutils/taskset.c:142
+msgid "affinity cannot be set due to PF_NO_SETAFFINITY flag set"
msgstr ""
-#: sys-utils/setpriv.c:291 sys-utils/setpriv.c:383
-#, fuzzy
-msgid "getresuid failed"
-msgstr "setuid 失敗"
+#: schedutils/taskset.c:213 sys-utils/chcpu.c:300 sys-utils/irqtop.c:326
+msgid "cannot determine NR_CPUS; aborting"
+msgstr "無法決定 NR_CPUS；放棄"
-#: sys-utils/setpriv.c:300 sys-utils/setpriv.c:398
-#, fuzzy
-msgid "getresgid failed"
-msgstr "setgid 失敗"
+#: schedutils/taskset.c:222 schedutils/taskset.c:235 sys-utils/chcpu.c:307
+#: sys-utils/irqtop.c:330
+msgid "cpuset_alloc failed"
+msgstr "cpuset_alloc 失敗"
-#: sys-utils/setpriv.c:311
-#, c-format
-msgid "Effective capabilities: "
-msgstr ""
+#: schedutils/taskset.c:242 sys-utils/chcpu.c:234 sys-utils/irqtop.c:333
+#, fuzzy, c-format
+msgid "failed to parse CPU list: %s"
+msgstr "剖析 CPU 清單時失敗：%s"
-#: sys-utils/setpriv.c:316
-#, c-format
-msgid "Permitted capabilities: "
-msgstr ""
+#: schedutils/taskset.c:245
+#, fuzzy, c-format
+msgid "failed to parse CPU mask: %s"
+msgstr "剖析 CPU 遮罩時失敗：%s"
-#: sys-utils/setpriv.c:322
-#, c-format
-msgid "Inheritable capabilities: "
+#: schedutils/uclampset.c:56
+#, fuzzy, c-format
+msgid ""
+" %1$s [options]\n"
+" %1$s [options] --pid <pid> | --system | <command> <arg>...\n"
msgstr ""
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
-#: sys-utils/setpriv.c:327
-#, c-format
-msgid "Capability bounding set: "
+#: schedutils/uclampset.c:61
+msgid "Show or change the utilization clamping attributes.\n"
msgstr ""
-#: sys-utils/setpriv.c:335
+#: schedutils/uclampset.c:64
#, fuzzy
-msgid "SELinux label"
-msgstr "Linux 純文字"
+msgid " -m <value> util_min value to set\n"
+msgstr " -s 列印訊息到標準輸出\n"
-#: sys-utils/setpriv.c:338
-msgid "AppArmor profile"
+#: schedutils/uclampset.c:65
+msgid " -M <value> util_max value to set\n"
msgstr ""
-#: sys-utils/setpriv.c:351
-#, c-format
-msgid "cap %d: libcap-ng is broken"
-msgstr ""
+#: schedutils/uclampset.c:67
+#, fuzzy
+msgid " -p, --pid <pid> operate on existing given pid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
-#: sys-utils/setpriv.c:374
-msgid "Invalid supplementary group id"
+#: schedutils/uclampset.c:68
+#, fuzzy
+msgid " -s, --system operate on system\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: schedutils/uclampset.c:69
+msgid " -R, --reset-on-fork set reset-on-fork flag\n"
msgstr ""
-#: sys-utils/setpriv.c:391
-#, fuzzy
-msgid "setresuid failed"
-msgstr "setuid 失敗"
+#: schedutils/uclampset.c:75
+msgid "Utilization value range is [0:1024]. Use special -1 value to reset to system's default.\n"
+msgstr ""
-#: sys-utils/setpriv.c:406
-#, fuzzy
-msgid "setresgid failed"
-msgstr "setgid 失敗"
+#: schedutils/uclampset.c:92 schedutils/uclampset.c:158
+#, fuzzy, c-format
+msgid "failed to get pid %d's uclamp values"
+msgstr "取得 pid %d 的屬性時失敗"
-#: sys-utils/setpriv.c:427
-msgid "bad capability string"
+#: schedutils/uclampset.c:99
+#, c-format
+msgid "%s (%d) util_clamp: min: %d max: %d\n"
msgstr ""
-#: sys-utils/setpriv.c:435
-msgid "libcap-ng is too old for \"all\" caps"
+#: schedutils/uclampset.c:129
+#, c-format
+msgid "System util_clamp: min: %u max: %u\n"
msgstr ""
-#: sys-utils/setpriv.c:444
+#: schedutils/uclampset.c:188
#, fuzzy, c-format
-msgid "unknown capability \"%s\""
-msgstr "不明機能『%s』"
+msgid "failed to set tid %d's uclamp values"
+msgstr "設定 tid %d's 策略時失敗"
-#: sys-utils/setpriv.c:468
-#, fuzzy
-msgid "unrecognized securebit set -- refusing to adjust"
-msgstr "無法辨識的格式 - 使用磁區數\n"
+#: schedutils/uclampset.c:193
+#, fuzzy, c-format
+msgid "failed to set pid %d's uclamp values"
+msgstr "設定 pid %d 的策略時失敗"
-#: sys-utils/setpriv.c:472
-msgid "bad securebits string"
+#: schedutils/uclampset.c:207
+msgid "util_min must be <= util_max"
msgstr ""
-#: sys-utils/setpriv.c:479
+#: schedutils/uclampset.c:218
+#, fuzzy, c-format
+msgid "%d out of range"
+msgstr "數值超出範圍。\n"
+
+#: schedutils/uclampset.c:269
#, fuzzy
-msgid "+all securebits is not allowed"
-msgstr "『%c』未被允許"
+msgid "invalid util_min argument"
+msgstr "無效的時間引數"
-#: sys-utils/setpriv.c:492
+#: schedutils/uclampset.c:274
#, fuzzy
-msgid "adjusting keep_caps does not make sense"
-msgstr "指定的範圍<%d:%d>不具任何意義"
+msgid "invalid util_max argument"
+msgstr "無效的時間引數"
-#: sys-utils/setpriv.c:496
+#: schedutils/uclampset.c:296
#, fuzzy
-msgid "unrecognized securebit"
-msgstr "ç\84¡æ³\95辨è\98ç\9a\84輸å\85¥ï¼\9a%s"
+msgid "missing -p option"
+msgstr "缺å°\91é\81¸é \85å\97串å¼\95æ\95¸"
-#: sys-utils/setpriv.c:516
-msgid "SELinux is not running"
-msgstr ""
+#: schedutils/uclampset.c:314
+#, fuzzy
+msgid "no cmd to execute"
+msgstr "執行 %s 時失敗"
-#: sys-utils/setpriv.c:539
-msgid "AppArmor is not running"
+#: sys-utils/blkdiscard.c:76
+#, c-format
+msgid "%s: Zero-filled %<PRIu64> bytes from the offset %<PRIu64>\n"
msgstr ""
-#: sys-utils/setpriv.c:650
-msgid "duplicate --no-new-privs option"
+#: sys-utils/blkdiscard.c:81
+#, c-format
+msgid "%s: Discarded %<PRIu64> bytes from the offset %<PRIu64>\n"
msgstr ""
-#: sys-utils/setpriv.c:655
-msgid "duplicate ruid"
+#: sys-utils/blkdiscard.c:95
+msgid "Discard the content of sectors on a device.\n"
msgstr ""
-#: sys-utils/setpriv.c:657
+#: sys-utils/blkdiscard.c:98
#, fuzzy
-msgid "failed to parse ruid"
-msgstr "剖析 pid 時失敗"
-
-#: sys-utils/setpriv.c:661
-msgid "duplicate euid"
-msgstr ""
+msgid " -f, --force disable all checking\n"
+msgstr "您可以停用所有的一致性檢查藉由："
-#: sys-utils/setpriv.c:663
+#: sys-utils/blkdiscard.c:99
#, fuzzy
-msgid "failed to parse euid"
-msgstr "剖析結束時失敗"
+msgid " -l, --length <num> length of bytes to discard from the offset\n"
+msgstr "剖析列號的時失敗"
-#: sys-utils/setpriv.c:667
-msgid "duplicate ruid or euid"
-msgstr ""
+#: sys-utils/blkdiscard.c:100
+#, fuzzy
+msgid " -o, --offset <num> offset in bytes to discard from\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/setpriv.c:669
+#: sys-utils/blkdiscard.c:101
#, fuzzy
-msgid "failed to parse reuid"
-msgstr "剖析 pid 時失敗"
+msgid " -p, --step <num> size of the discard iterations within the offset\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/setpriv.c:673
-msgid "duplicate rgid"
-msgstr ""
+#: sys-utils/blkdiscard.c:102
+#, fuzzy
+msgid " -q, --quiet suppress warning messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
-#: sys-utils/setpriv.c:675
+#: sys-utils/blkdiscard.c:103
#, fuzzy
-msgid "failed to parse rgid"
-msgstr "剖析 pid 時失敗"
+msgid " -s, --secure perform secure discard\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
-#: sys-utils/setpriv.c:679
-msgid "duplicate egid"
-msgstr ""
+#: sys-utils/blkdiscard.c:104
+#, fuzzy
+msgid " -v, --verbose print aligned length and offset\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
-#: sys-utils/setpriv.c:681
+#: sys-utils/blkdiscard.c:105
#, fuzzy
-msgid "failed to parse egid"
-msgstr "剖析結束時失敗"
+msgid " -z, --zeroout zero-fill rather than discard\n"
+msgstr " -n --nonblock 失敗而非等待\n"
-#: sys-utils/setpriv.c:685
-msgid "duplicate rgid or egid"
-msgstr ""
+#: sys-utils/blkdiscard.c:162 sys-utils/blkzone.c:378
+#, fuzzy, c-format
+msgid "%s: %s ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#: sys-utils/setpriv.c:687
+#: sys-utils/blkdiscard.c:208 sys-utils/fstrim.c:546 sys-utils/losetup.c:710
+#: text-utils/hexdump.c:131
#, fuzzy
-msgid "failed to parse regid"
-msgstr "剖析 pid 時失敗"
+msgid "failed to parse offset"
+msgstr "剖析偏移時失敗"
-#: sys-utils/setpriv.c:692
-msgid "duplicate --clear-groups option"
-msgstr ""
+#: sys-utils/blkdiscard.c:212
+#, fuzzy
+msgid "failed to parse step"
+msgstr "剖析大小時失敗"
-#: sys-utils/setpriv.c:698
-msgid "duplicate --keep-groups option"
-msgstr ""
+#: sys-utils/blkdiscard.c:242 sys-utils/blkpr.c:307 sys-utils/blkzone.c:499
+#: sys-utils/fallocate.c:382 sys-utils/fsfreeze.c:110 sys-utils/fstrim.c:577
+#: sys-utils/umount.c:619 term-utils/script.c:908
+msgid "unexpected number of arguments"
+msgstr "未預期的引數數量"
-#: sys-utils/setpriv.c:704
-msgid "duplicate --groups option"
-msgstr ""
+#: sys-utils/blkdiscard.c:256
+#, fuzzy, c-format
+msgid "%s: BLKGETSIZE64 ioctl failed"
+msgstr "BLKGETSIZE ioctl 失敗的於 %s"
-#: sys-utils/setpriv.c:713
-msgid "duplicate --inh-caps option"
-msgstr ""
+#: sys-utils/blkdiscard.c:258 sys-utils/blkzone.c:155
+#, fuzzy, c-format
+msgid "%s: BLKSSZGET ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
-#: sys-utils/setpriv.c:719
-msgid "duplicate --bounding-set option"
+#: sys-utils/blkdiscard.c:262
+#, c-format
+msgid "%s: offset %<PRIu64> is not aligned to sector size %i"
msgstr ""
-#: sys-utils/setpriv.c:725
-msgid "duplicate --securebits option"
-msgstr ""
+#: sys-utils/blkdiscard.c:267 sys-utils/blkzone.c:356
+#, fuzzy, c-format
+msgid "%s: offset is greater than device size"
+msgstr "無法提取裝置大小"
-#: sys-utils/setpriv.c:731
-msgid "duplicate --selinux-label option"
+#: sys-utils/blkdiscard.c:276
+#, c-format
+msgid "%s: length %<PRIu64> is not aligned to sector size %i"
msgstr ""
-#: sys-utils/setpriv.c:737
-msgid "duplicate --apparmor-profile option"
+#: sys-utils/blkdiscard.c:281
+msgid "Operation forced, data will be lost!"
msgstr ""
-#: sys-utils/setpriv.c:748
-#, fuzzy, c-format
-msgid "unrecognized option '%c'"
-msgstr "無法辨識的輸入：%s"
-
-#: sys-utils/setpriv.c:755
-msgid "--dump is incompatible with all other options"
+#: sys-utils/blkdiscard.c:292
+msgid "This is destructive operation, data will be lost! Use the -f option to override."
msgstr ""
-#: sys-utils/setpriv.c:763
+#: sys-utils/blkdiscard.c:299
#, fuzzy
-msgid "--list-caps must be specified alone"
-msgstr "é\81¸é \85 --pid ä¹\9f許æ\9c\83被æ\8c\87å®\9aç\9a\84å\8fªä¸\80次"
+msgid "failed to probe the device"
+msgstr "é\85\8dç½®è¿ä»£å\99¨æ\99\82失æ\95\97"
-#: sys-utils/setpriv.c:769
+#: sys-utils/blkpr.c:195 sys-utils/blkpr.c:280
#, fuzzy
-msgid "No program specified"
-msgstr "未指定任何檔名"
+msgid "unknown command"
+msgstr "%c: 不明的命令\n"
-#: sys-utils/setpriv.c:774
-msgid "--[re]gid requires --keep-groups, --clear-groups, or --groups"
-msgstr ""
+#: sys-utils/blkpr.c:200
+#, fuzzy
+msgid "pr ioctl failed"
+msgstr "ioctl 失敗"
-#: sys-utils/setpriv.c:778
-msgid "disallow granting new privileges failed"
+#: sys-utils/blkpr.c:202
+#, c-format
+msgid "error code 0x%x, for more detailed information see specification of device model."
msgstr ""
-#: sys-utils/setpriv.c:786
-msgid "keep process capabilities failed"
+#: sys-utils/blkpr.c:216
+msgid "Persistent reservations on a device.\n"
msgstr ""
-#: sys-utils/setpriv.c:794
-msgid "activate capabilities"
-msgstr ""
+#: sys-utils/blkpr.c:219
+#, fuzzy
+msgid " -c, --command <cmd> command of persistent reservations\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
-#: sys-utils/setpriv.c:800
-msgid "reactivate capabilities"
-msgstr ""
-
-#: sys-utils/setpriv.c:808 sys-utils/setpriv.c:812
-#, fuzzy
-msgid "setgroups failed"
-msgstr "strdup 失敗"
-
-#: sys-utils/setpriv.c:817
-#, fuzzy
-msgid "set process securebits failed"
-msgstr "setuid 失敗"
-
-#: sys-utils/setpriv.c:823
-msgid "apply bounding set"
-msgstr ""
-
-#: sys-utils/setpriv.c:829
-msgid "apply capabilities"
-msgstr ""
-
-#: sys-utils/setpriv.c:834
-#, fuzzy, c-format
-msgid "cannot execute: %s"
-msgstr "無法寫入 %s"
-
-#: sys-utils/setsid.c:32
-#, fuzzy, c-format
-msgid " %s [options] <program> [arguments ...]\n"
-msgstr " %s [選項] <program> [引數...]\n"
-
-#: sys-utils/setsid.c:36
+#: sys-utils/blkpr.c:220
#, fuzzy
-msgid " -c, --ctty set the controlling terminal to the current one\n"
-msgstr " -c, --ctty 設定控制終端機到目前的一個\n"
-
-#: sys-utils/setsid.c:37
-msgid " -w, --wait wait program to exit, and use the same return\n"
-msgstr ""
+msgid " -k, --key <num> key to operate\n"
+msgstr " -v, --verbose 是更多詳細的\n"
-#: sys-utils/setsid.c:90
+#: sys-utils/blkpr.c:221
#, fuzzy
-msgid "fork"
-msgstr "衍生"
-
-#: sys-utils/setsid.c:102
-#, fuzzy, c-format
-msgid "child %d did not exit normally"
-msgstr "卸載的『%s』並未正常離開"
+msgid " -K, --oldkey <num> old key to operate\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
-#: sys-utils/setsid.c:107
+#: sys-utils/blkpr.c:222
#, fuzzy
-msgid "setsid failed"
-msgstr "setsid 失敗"
+msgid " -f, --flag <flag> command flag\n"
+msgstr " -i, --iflag [-]<iflag> 設定輸入模式旗標\n"
-#: sys-utils/setsid.c:111
+#: sys-utils/blkpr.c:223
#, fuzzy
-msgid "failed to set the controlling terminal"
-msgstr "設定控制終端機時失敗"
-
-#: sys-utils/swapoff.c:32
-#, fuzzy, c-format
-msgid "swapoff %s\n"
-msgstr "swapoff %s\n"
-
-#: sys-utils/swapoff.c:44
-msgid "Not superuser."
-msgstr "並非系統管理者。"
-
-#: sys-utils/swapoff.c:47
-#, c-format
-msgid "%s: swapoff failed"
-msgstr "%s：swapoff 失敗"
+msgid " -t, --type <type> command type\n"
+msgstr " -n, --noparity 設定同位到無\n"
-#: sys-utils/swapoff.c:68 sys-utils/swapon.c:683
-#, fuzzy, c-format
-msgid " %s [options] [<spec>]\n"
-msgstr " %s [選項] [<spec>]\n"
+#: sys-utils/blkpr.c:230
+msgid " <cmd> is an command, available command:\n"
+msgstr ""
-#: sys-utils/swapoff.c:71
-#, fuzzy
-msgid ""
-" -a, --all disable all swaps from /proc/swaps\n"
-" -v, --verbose verbose mode\n"
+#: sys-utils/blkpr.c:233
+msgid " <flag> is a command flag, available flags:\n"
msgstr ""
-" -a, --all 全部停用交換從/proc/交換\n"
-" -v, --verbose 詳細模式\n"
-#: sys-utils/swapoff.c:78
-#, fuzzy
-msgid ""
-"\n"
-"The <spec> parameter:\n"
-" -L <label> LABEL of device to be used\n"
-" -U <uuid> UUID of device to be used\n"
-" LABEL=<label> LABEL of device to be used\n"
-" UUID=<uuid> UUID of device to be used\n"
-" <device> name of device to be used\n"
-" <file> name of file to be used\n"
+#: sys-utils/blkpr.c:236
+msgid " <type> is a command type, available types:\n"
msgstr ""
-"\n"
-"<spec> 參數：\n"
-" -L<標貼> 標貼的裝置為使用\n"
-" -U<uuid> UUID 的裝置為使用\n"
-" 標貼=<標貼> 標貼的裝置為使用\n"
-" UUID=<uuid> UUID 的裝置為使用\n"
-"<裝置> 名稱的裝置為使用\n"
-"<檔案> 名稱的檔案為使用\n"
-#: sys-utils/swapon.c:100
+#: sys-utils/blkpr.c:271
#, fuzzy
-msgid "device file or partition path"
-msgstr "裝置檔案或分割路徑"
+msgid "failed to parse key"
+msgstr "剖析結束時失敗"
-#: sys-utils/swapon.c:101
+#: sys-utils/blkpr.c:275
#, fuzzy
-msgid "type of the device"
-msgstr "å\9e\8bæ\85\8bç\9a\84è£\9dç½®"
+msgid "failed to parse old key"
+msgstr "å\89\96æ\9e\90 pid æ\99\82失æ\95\97"
-#: sys-utils/swapon.c:102
+#: sys-utils/blkpr.c:285
#, fuzzy
-msgid "size of the swap area"
-msgstr "大小的交換區域"
+msgid "unknown type"
+msgstr "不明使用者 %s"
-#: sys-utils/swapon.c:103
+#: sys-utils/blkpr.c:290
#, fuzzy
-msgid "bytes in use"
-msgstr "ä½\8då\85\83çµ\84å\9c¨ä¸ä½¿ç\94¨"
+msgid "unknown flag"
+msgstr "ä¸\8dæ\98\8eæ\97\97æ¨\99ï¼\9a%s"
-#: sys-utils/swapon.c:104
+#: sys-utils/blkzone.c:93
#, fuzzy
-msgid "swap priority"
-msgstr "交換優先權"
-
-#: sys-utils/swapon.c:209
-#, fuzzy, c-format
-msgid "%s\t\t\t\tType\t\tSize\tUsed\tPriority\n"
-msgstr "%s\t\t\t\t型態\t\t大小\t使用\t優先權\n"
+msgid "Report zone information about the given device"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/swapon.c:209
+#: sys-utils/blkzone.c:97
#, fuzzy
-msgid "Filename"
-msgstr "檔名"
-
-#: sys-utils/swapon.c:275
-#, c-format
-msgid "%s: reinitializing the swap."
-msgstr "%s：重新初始化交換區。"
-
-#: sys-utils/swapon.c:327
-#, c-format
-msgid "%s: lseek failed"
-msgstr "%s：lseek 失敗"
+msgid "Report sum of zone capacities for the given device"
+msgstr "%s：不是區塊裝置"
-#: sys-utils/swapon.c:333
-#, c-format
-msgid "%s: write signature failed"
-msgstr "%s：寫入簽章時失敗"
+#: sys-utils/blkzone.c:103
+msgid "Reset a range of zones."
+msgstr ""
-#: sys-utils/swapon.c:420
-#, c-format
-msgid "%s: found swap signature: version %d, page-size %d, %s byte order"
-msgstr "%s：找到交換區簽章：版本 %d，頁面大小 %d，%s 位元組序"
+#: sys-utils/blkzone.c:109
+msgid "Open a range of zones."
+msgstr ""
-#: sys-utils/swapon.c:425
-msgid "different"
-msgstr "不同"
+#: sys-utils/blkzone.c:115
+msgid "Close a range of zones."
+msgstr ""
-#: sys-utils/swapon.c:425
-msgid "same"
-msgstr "相同"
+#: sys-utils/blkzone.c:121
+msgid "Set a range of zones to Full."
+msgstr ""
-#: sys-utils/swapon.c:468
-#, c-format
-msgid "%s: insecure permissions %04o, %04o suggested."
-msgstr "%s：不安全的權限 %04o, 建議使用 %04o。"
+#: sys-utils/blkzone.c:152
+#, fuzzy, c-format
+msgid "%s: blkdev_get_sectors ioctl failed"
+msgstr "%s：變更目錄失敗"
-#: sys-utils/swapon.c:473
+#: sys-utils/blkzone.c:242
#, fuzzy, c-format
-msgid "%s: insecure file owner %d, 0 (root) suggested."
-msgstr "%s：不安全檔案擁有者 %d，0 (根) 建議。"
+msgid "%s: offset is greater than or equal to device size"
+msgstr "無法提取裝置大小"
-#: sys-utils/swapon.c:479
-#, c-format
-msgid "%s: skipping - it appears to have holes."
-msgstr "%s：跳過 - 看來似乎有漏洞。"
+#: sys-utils/blkzone.c:246 sys-utils/blkzone.c:346
+#, fuzzy, c-format
+msgid "%s: unable to determine zone size"
+msgstr "%s：無法寫入區映射"
-#: sys-utils/swapon.c:493
-#, c-format
-msgid "%s: get size failed"
-msgstr "%s：取得大小時失敗"
+#: sys-utils/blkzone.c:264
+#, fuzzy, c-format
+msgid "%s: BLKREPORTZONE ioctl failed"
+msgstr "BLKGETSIZE ioctl 失敗的於 %s"
-#: sys-utils/swapon.c:499
+#: sys-utils/blkzone.c:267
#, c-format
-msgid "%s: read swap header failed"
-msgstr "%s：讀取交換區頁首失敗"
+msgid "Found %d zones from 0x%<PRIx64>\n"
+msgstr ""
-#: sys-utils/swapon.c:509
+#: sys-utils/blkzone.c:302
#, c-format
-msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
-msgstr "%s：pagesize=%d，swapsize=%llu，devsize=%llu"
+msgid " start: 0x%09<PRIx64>, len 0x%06<PRIx64>, cap 0x%06<PRIx64>, wptr 0x%06<PRIx64> reset:%u non-seq:%u, zcond:%2u(%s) [type: %u(%s)]\n"
+msgstr ""
-#: sys-utils/swapon.c:514
+#: sys-utils/blkzone.c:310
#, c-format
-msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
-msgstr "%s：last_page 0x%08llx 大於實際的交換區空間大小"
+msgid " start: 0x%09<PRIx64>, len 0x%06<PRIx64>, wptr 0x%06<PRIx64> reset:%u non-seq:%u, zcond:%2u(%s) [type: %u(%s)]\n"
+msgstr ""
-#: sys-utils/swapon.c:524
+#: sys-utils/blkzone.c:326
#, c-format
-msgid "%s: swap format pagesize does not match."
-msgstr "%s：交換區格式頁面大小不吻合。"
+msgid "0x%09<PRIx64>\n"
+msgstr ""
-#: sys-utils/swapon.c:532
+#: sys-utils/blkzone.c:351
#, c-format
-msgid ""
-"%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
-msgstr "%s：交換區格式頁面大小不吻合。(使用 --fixpgsz 以重新初始它。)"
+msgid "%s: offset %<PRIu64> is not aligned to zone size %lu"
+msgstr ""
-#: sys-utils/swapon.c:541
+#: sys-utils/blkzone.c:370
#, c-format
-msgid "%s: software suspend data detected. Rewriting the swap signature."
-msgstr "%s：偵測到軟體懸置資料。重新寫入交換區簽章。"
+msgid "%s: number of sectors %<PRIu64> is not aligned to zone size %lu"
+msgstr ""
-#: sys-utils/swapon.c:566
+#: sys-utils/blkzone.c:381
#, fuzzy, c-format
-msgid "swapon %s\n"
-msgstr "swapon %s\n"
-
-#: sys-utils/swapon.c:605
-#, c-format
-msgid "%s: swapon failed"
-msgstr "%s：swapon 失敗"
+msgid "%s: successful %s of zones in range from %<PRIu64>, to %<PRIu64>"
+msgstr "變更根從『%s』到『%s 時失敗』"
-#: sys-utils/swapon.c:632 sys-utils/umount.c:325
+#: sys-utils/blkzone.c:396
#, fuzzy, c-format
-msgid "failed to parse %s"
-msgstr "剖析 %s 時失敗"
+msgid " %s <command> [options] <device>\n"
+msgstr " %s [選項] <device>\n"
-#: sys-utils/swapon.c:686
-#, fuzzy
-msgid ""
-" -a, --all enable all swaps from /etc/fstab\n"
-" -d, --discard[=<policy>] enable swap discards, if supported by device\n"
-" -e, --ifexists silently skip devices that do not exist\n"
-" -f, --fixpgsz reinitialize the swap space if necessary\n"
-" -p, --priority <prio> specify the priority of the swap device\n"
-" -s, --summary display summary about used swap devices\n"
-" --show[=<columns>] display summary in definable table\n"
-" --noheadings don't print headings, use with --show\n"
-" --raw use the raw output format, use with --show\n"
-" --bytes display swap size in bytes in --show output\n"
-" -v, --verbose verbose mode\n"
-msgstr ""
-" -a, --all 全部啟用交換從/etc/fstab\n"
-" -d, --discard 捨棄自由的頁面之前它們被重新使用\n"
-" -e, --ifexists 寂靜的跳過裝置該不存在\n"
-" -f, --fixpgsz 重新初始化交換空間如果必要的話\n"
-" -p, --priority <prio> 指定優先權的交換裝置\n"
-" -s, --summary 顯示概要關於使用的交換裝置\n"
-" --show [=<欄位>] 顯示概要在中 definable 表格\n"
-" --noheadings 不列印標頭，使用與 --show\n"
-" --raw 使用原始輸出格式，使用與 --show\n"
-" --bytes 顯示交換大小在中位元組在中 --show 輸出\n"
-" -v, --verbose 詳細模式\n"
+#: sys-utils/blkzone.c:399
+msgid "Run zone command on the given block device.\n"
+msgstr ""
-#: sys-utils/swapon.c:702
+#: sys-utils/blkzone.c:406
#, fuzzy
-msgid ""
-"\n"
-"The <spec> parameter:\n"
-" -L <label> synonym for LABEL=<label>\n"
-" -U <uuid> synonym for UUID=<uuid>\n"
-" LABEL=<label> specifies device by swap area label\n"
-" UUID=<uuid> specifies device by swap area UUID\n"
-" PARTLABEL=<label> specifies device by partition label\n"
-" PARTUUID=<uuid> specifies device by partition UUID\n"
-" <device> name of device to be used\n"
-" <file> name of file to be used\n"
-msgstr ""
-"\n"
-"<spec> 參數：\n"
-" -L<標貼> 同義字用於標貼=<標貼>\n"
-" -U<uuid> 同義字用於 UUID=<uuid>\n"
-" 標貼=<標貼> 指定裝置由交換區域標貼\n"
-" UUID=<uuid> 指定裝置由交換區域 UUID\n"
-" PARTLABEL=<標貼> 指定裝置由分割標貼\n"
-" PARTUUID=<uuid> 指定裝置由分割 UUID\n"
-"<裝置> 名稱的裝置為使用\n"
-"<檔案> 名稱的檔案為使用\n"
+msgid " -o, --offset <sector> start sector of zone to act (in 512-byte sectors)\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
-#: sys-utils/swapon.c:712
-msgid ""
-"\n"
-"Available discard policy types (for --discard):\n"
-" once\t : only single-time area discards are issued. (swapon)\n"
-" pages\t : discard freed pages before they are reused.\n"
-" * if no policy is selected both discard types are enabled. (default)\n"
+#: sys-utils/blkzone.c:407
+msgid " -l, --length <sectors> maximum sectors to act (in 512-byte sectors)\n"
msgstr ""
-#: sys-utils/swapon.c:717
+#: sys-utils/blkzone.c:408
#, fuzzy
-msgid ""
-"\n"
-"Available columns (for --show):\n"
-msgstr ""
-"\n"
-"可用欄位 (用於 --show)：\n"
+msgid " -c, --count <number> maximum number of zones\n"
+msgstr "剖析列號的時失敗"
-#: sys-utils/swapon.c:775
+#: sys-utils/blkzone.c:409
#, fuzzy
-msgid "failed to parse priority"
-msgstr "剖析 pid 時失敗"
+msgid " -f, --force enforce on block devices used by the system\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/blkzone.c:410
+#, fuzzy
+msgid " -v, --verbose display more details\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/blkzone.c:415
+#, fuzzy
+msgid "<sector> and <sectors>"
+msgstr "磁區數量：%d, 磁區大小：%d\n"
-#: sys-utils/swapon.c:794
+#: sys-utils/blkzone.c:453
#, fuzzy, c-format
-msgid "unsupported discard policy: %s"
-msgstr "不受支援的引數：%s"
+msgid "%s is not valid command name"
+msgstr "%s 並非有效區塊裝置"
-#: sys-utils/swapon-common.c:62
-#, c-format
-msgid "cannot find the device for %s"
-msgstr "找不到做為 %s 的裝置"
+#: sys-utils/blkzone.c:465
+#, fuzzy
+msgid "failed to parse number of zones"
+msgstr "剖析列號的時失敗"
-#: sys-utils/switch_root.c:57
+#: sys-utils/blkzone.c:469
#, fuzzy
-msgid "failed to open directory"
-msgstr "é\96\8bå\95\9fç\9b®é\8c\84æ\99\82失æ\95\97"
+msgid "failed to parse number of sectors"
+msgstr "å\89\96æ\9e\90å\88\97è\99\9fç\9a\84æ\99\82失æ\95\97"
-#: sys-utils/switch_root.c:65 term-utils/wall.c:297
+#: sys-utils/blkzone.c:473
#, fuzzy
-msgid "stat failed"
-msgstr "stat 失敗"
+msgid "failed to parse zone offset"
+msgstr "剖析偏移時失敗"
-#: sys-utils/switch_root.c:75
+#: sys-utils/blkzone.c:492 sys-utils/setsid.c:92
#, fuzzy
-msgid "failed to read directory"
-msgstr "讀取目錄時失敗"
+msgid "no command specified"
+msgstr "未指定任何動作"
-#: sys-utils/switch_root.c:107
+#: sys-utils/chcpu.c:84 sys-utils/chcpu.c:181
#, fuzzy, c-format
-msgid "failed to unlink %s"
-msgstr "取消連結 %s 時失敗"
+msgid "CPU %u does not exist"
+msgstr "CPU %d 不存在\n"
-#: sys-utils/switch_root.c:144
+#: sys-utils/chcpu.c:89
#, fuzzy, c-format
-msgid "failed to mount moving %s to %s"
-msgstr "掛載移動 %s 到 %s 時失敗"
+msgid "CPU %u is not hot pluggable"
+msgstr "CPU %d 不是熱門 pluggable\n"
-#: sys-utils/switch_root.c:146
+#: sys-utils/chcpu.c:96
#, fuzzy, c-format
-msgid "forcing unmount of %s"
-msgstr "強制卸載的 %s"
+msgid "CPU %u is already enabled\n"
+msgstr "CPU %d 已經已啟用\n"
-#: sys-utils/switch_root.c:152
+#: sys-utils/chcpu.c:100
#, fuzzy, c-format
-msgid "failed to change directory to %s"
-msgstr "變更目錄到 %s 時失敗"
+msgid "CPU %u is already disabled\n"
+msgstr "CPU %d 已經已停用\n"
-#: sys-utils/switch_root.c:164
+#: sys-utils/chcpu.c:108
#, fuzzy, c-format
-msgid "failed to mount moving %s to /"
-msgstr "掛載移動 %s 到時失敗/"
+msgid "CPU %u enable failed (CPU is deconfigured)"
+msgstr "CPU %d 啟用失敗 (CPU 被 deconfigured)\n"
-#: sys-utils/switch_root.c:170
-#, fuzzy
-msgid "failed to change root"
-msgstr "變更根時失敗"
+#: sys-utils/chcpu.c:111
+#, fuzzy, c-format
+msgid "CPU %u enable failed"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: sys-utils/switch_root.c:181
-msgid "old root filesystem is not an initramfs"
-msgstr ""
-
-#: sys-utils/switch_root.c:195
+#: sys-utils/chcpu.c:114
#, fuzzy, c-format
-msgid " %s [options] <newrootdir> <init> <args to init>\n"
-msgstr " %s [選項] <newrootdir><init><引數到 init>\n"
-
-#: sys-utils/switch_root.c:227
-#, fuzzy
-msgid "failed. Sorry."
-msgstr "失敗。抱歉。"
+msgid "CPU %u enabled\n"
+msgstr "CPU %d 已啟用\n"
-#: sys-utils/switch_root.c:230
+#: sys-utils/chcpu.c:117
#, fuzzy, c-format
-msgid "cannot access %s"
-msgstr "無法存取 %s"
-
-#: sys-utils/tunelp.c:83
-#, fuzzy
-msgid " -i, --irq <num> specify parallel port irq\n"
-msgstr " -i, --irq <num> 指定並列埠 irq\n"
-
-#: sys-utils/tunelp.c:84
-#, fuzzy
-msgid " -t, --time <ms> driver wait time in milliseconds\n"
-msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
-
-#: sys-utils/tunelp.c:85
-#, fuzzy
-msgid ""
-" -c, --chars <num> number of output characters before sleep\n"
-msgstr " -c, --chars <num> 輸出字元數的之前暫停\n"
+msgid "CPU %u disable failed (last enabled CPU)"
+msgstr "CPU %d 停用失敗 (最後一筆已啟用 CPU)\n"
-#: sys-utils/tunelp.c:86
-#, fuzzy
-msgid " -w, --wait <us> strobe wait in micro seconds\n"
-msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+#: sys-utils/chcpu.c:123
+#, fuzzy, c-format
+msgid "CPU %u disable failed"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#. TRANSLATORS: do not translate <on|off> arguments. The
-#. argument reader does not recognize locale, unless `on' is
-#. exactly that very same string.
-#: sys-utils/tunelp.c:90
-#, fuzzy
-msgid " -a, --abort <on|off> abort on error\n"
-msgstr " -a, --abort <on|off> 放棄於錯誤\n"
+#: sys-utils/chcpu.c:126
+#, fuzzy, c-format
+msgid "CPU %u disabled\n"
+msgstr "CPU %d 已停用\n"
-#: sys-utils/tunelp.c:91
+#: sys-utils/chcpu.c:139
#, fuzzy
-msgid " -o, --check-status <on|off> check printer status before printing\n"
-msgstr " -o, --check-status <on|off> 檢查印表機狀態之前列印\n"
+msgid "This system does not support rescanning of CPUs"
+msgstr "這個系統不支援重新掃描的 CPUs"
-#: sys-utils/tunelp.c:92
+#: sys-utils/chcpu.c:142
#, fuzzy
-msgid " -C, --careful <on|off> extra checking to status check\n"
-msgstr " -C, --careful <on|off> 額外檢查到狀態檢查\n"
+msgid "Failed to trigger rescan of CPUs"
+msgstr "觸發重新掃描的 CPUs 時失敗"
-#: sys-utils/tunelp.c:93
-#, fuzzy
-msgid " -s, --status query printer status\n"
-msgstr " -s, --status 查詢印表機狀態\n"
+#: sys-utils/chcpu.c:144
+#, fuzzy, c-format
+msgid "Triggered rescan of CPUs\n"
+msgstr "觸發的重新掃描的 CPUs\n"
-#: sys-utils/tunelp.c:94
+#: sys-utils/chcpu.c:151
#, fuzzy
-msgid " -T, --trust-irq <on|off> make driver to trust irq\n"
-msgstr " -T, --trust-irq <on|off> 製作驅動程式到信賴 irq\n"
+msgid "This system does not support setting the dispatching mode of CPUs"
+msgstr "這個系統不支援設定派送模式的 CPUs"
-#: sys-utils/tunelp.c:95
+#: sys-utils/chcpu.c:155
#, fuzzy
-msgid " -r, --reset reset the port\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid "Failed to set horizontal dispatch mode"
+msgstr "設定水平派送模式時失敗"
-#: sys-utils/tunelp.c:96
-#, fuzzy
-msgid " -q, --print-irq <on|off> display current irq setting\n"
-msgstr " -q, --print-irq <on|off> 顯示目前的 irq 設定\n"
+#: sys-utils/chcpu.c:157
+#, fuzzy, c-format
+msgid "Successfully set horizontal dispatching mode\n"
+msgstr "成功設定水平派送模式\n"
-#: sys-utils/tunelp.c:109
+#: sys-utils/chcpu.c:160
#, fuzzy
-msgid "bad value"
-msgstr "不當的值"
+msgid "Failed to set vertical dispatch mode"
+msgstr "設定垂直派送模式時失敗"
-#: sys-utils/tunelp.c:273
+#: sys-utils/chcpu.c:162
#, fuzzy, c-format
-msgid "%s not an lp device"
-msgstr "%s 不是 lp 裝置"
-
-#: sys-utils/tunelp.c:293
-msgid "LPGETSTATUS error"
-msgstr "LPGETSTATUS 錯誤"
-
-#: sys-utils/tunelp.c:298
-#, c-format
-msgid "%s status is %d"
-msgstr "%s 狀態為 %d"
-
-#: sys-utils/tunelp.c:300
-#, c-format
-msgid ", busy"
-msgstr "，忙碌中"
-
-#: sys-utils/tunelp.c:302
-#, c-format
-msgid ", ready"
-msgstr "，就緒"
+msgid "Successfully set vertical dispatching mode\n"
+msgstr "成功設定垂直派送模式\n"
-#: sys-utils/tunelp.c:304
-#, c-format
-msgid ", out of paper"
-msgstr "，紙張耗盡"
+#: sys-utils/chcpu.c:186
+#, fuzzy, c-format
+msgid "CPU %u is not configurable"
+msgstr "CPU %d 不是可組配的\n"
-#: sys-utils/tunelp.c:306
-#, c-format
-msgid ", on-line"
-msgstr "，上線"
+#: sys-utils/chcpu.c:192
+#, fuzzy, c-format
+msgid "CPU %u is already configured\n"
+msgstr "CPU %d 已經已組配\n"
-#: sys-utils/tunelp.c:308
-#, c-format
-msgid ", error"
-msgstr "，錯誤"
+#: sys-utils/chcpu.c:196
+#, fuzzy, c-format
+msgid "CPU %u is already deconfigured\n"
+msgstr "CPU %d 已經 deconfigured\n"
-#: sys-utils/tunelp.c:314
-#, fuzzy
-msgid "ioctl failed"
-msgstr "ioctl 失敗"
+#: sys-utils/chcpu.c:201
+#, fuzzy, c-format
+msgid "CPU %u deconfigure failed (CPU is enabled)"
+msgstr "CPU %d deconfigure 失敗 (CPU 已啟用)\n"
-#: sys-utils/tunelp.c:324
-msgid "LPGETIRQ error"
-msgstr "LPGETIRQ 錯誤"
+#: sys-utils/chcpu.c:208
+#, fuzzy, c-format
+msgid "CPU %u configure failed"
+msgstr "CPU %d 組配失敗 (%m)\n"
-#: sys-utils/tunelp.c:329
-#, c-format
-msgid "%s using IRQ %d\n"
-msgstr "%s 正在使用 IRQ %d\n"
+#: sys-utils/chcpu.c:211
+#, fuzzy, c-format
+msgid "CPU %u configured\n"
+msgstr "CPU %d 已組配\n"
-#: sys-utils/tunelp.c:331
-#, c-format
-msgid "%s using polling\n"
-msgstr "%s 正在使用輪詢\n"
+#: sys-utils/chcpu.c:215
+#, fuzzy, c-format
+msgid "CPU %u deconfigure failed"
+msgstr "CPU %d deconfigure 失敗 (%m)\n"
-#: sys-utils/umount.c:76
+#: sys-utils/chcpu.c:218
#, fuzzy, c-format
-msgid ""
-" %1$s [-hV]\n"
-" %1$s -a [options]\n"
-" %1$s [options] <source> | <directory>\n"
-msgstr ""
-" %1$s [-hV]\n"
-" %1$s -a [選項]\n"
-" %1$s [選項] <source>|<目錄>\n"
+msgid "CPU %u deconfigured\n"
+msgstr "CPU %d deconfigured\n"
-#: sys-utils/umount.c:82
-#, fuzzy
-msgid " -a, --all unmount all filesystems\n"
-msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+#: sys-utils/chcpu.c:233
+#, fuzzy, c-format
+msgid "invalid CPU number in CPU list: %s"
+msgstr "無效的 CPU 數字在中 CPU 清單：%s"
-#: sys-utils/umount.c:83
+#: sys-utils/chcpu.c:241 text-utils/col.c:170
+#, fuzzy, c-format
msgid ""
-" -A, --all-targets unmount all mountpoins for the given device in the\n"
-" current namespace\n"
+"\n"
+"Usage:\n"
+" %s [options]\n"
msgstr ""
+"\n"
+"用法：\n"
+" %s [選項]\n"
-#: sys-utils/umount.c:85
-msgid " -c, --no-canonicalize don't canonicalize paths\n"
+#: sys-utils/chcpu.c:245
+msgid "Configure CPUs in a multi-processor system.\n"
msgstr ""
-#: sys-utils/umount.c:86
+#: sys-utils/chcpu.c:249
+#, fuzzy
msgid ""
-" -d, --detach-loop if mounted loop device, also free this loop device\n"
+" -e, --enable <cpu-list> enable cpus\n"
+" -d, --disable <cpu-list> disable cpus\n"
+" -c, --configure <cpu-list> configure cpus\n"
+" -g, --deconfigure <cpu-list> deconfigure cpus\n"
+" -p, --dispatch <mode> set dispatching mode\n"
+" -r, --rescan trigger rescan of cpus\n"
msgstr ""
+"\n"
+"選項：\n"
+" -h, --help 印出這份說明\n"
+" -e, --enable <cpu-list> 啟用 cpus\n"
+" -d, --disable<cpu-list> 停用 cpus\n"
+" -c, --configure<cpu-list> 組配 cpus\n"
+" -g, --deconfigure<cpu-list> deconfigure cpus\n"
+" -p, --dispatch<模式> 設定派送模式\n"
+" -r, --rescan 觸發重新掃描的 cpus\n"
+" -V, --version 輸出版本資訊然後離開\n"
-#: sys-utils/umount.c:87
-msgid " --fake dry run; skip the umount(2) syscall\n"
-msgstr ""
+#: sys-utils/chcpu.c:296
+#, fuzzy
+msgid "failed to initialize sysfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
-#: sys-utils/umount.c:88
-msgid ""
-" -f, --force force unmount (in case of an unreachable NFS "
-"system)\n"
-msgstr ""
+#: sys-utils/chcpu.c:338
+#, fuzzy, c-format
+msgid "unsupported argument: %s"
+msgstr "不受支援的引數：%s"
-#: sys-utils/umount.c:89
-msgid " -i, --internal-only don't call the umount.<type> helpers\n"
+#: sys-utils/chmem.c:100
+#, c-format
+msgid "Memory Block %<PRIu64> (0x%016<PRIx64>-0x%016<PRIx64>)"
msgstr ""
-#: sys-utils/umount.c:90
+#: sys-utils/chmem.c:124 sys-utils/chmem.c:197
#, fuzzy
-msgid " -n, --no-mtab don't write to /etc/mtab\n"
-msgstr " -n, --noparity 設定同位到無\n"
+msgid "Failed to parse index"
+msgstr "剖析 pid 時失敗"
-#: sys-utils/umount.c:91
-#, fuzzy
-msgid ""
-" -l, --lazy detach the filesystem now, clean up things later\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#: sys-utils/chmem.c:151
+#, fuzzy, c-format
+msgid "%s enable failed\n"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: sys-utils/umount.c:92
-msgid " -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
-msgstr ""
+#: sys-utils/chmem.c:153
+#, fuzzy, c-format
+msgid "%s disable failed\n"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: sys-utils/umount.c:93
-msgid ""
-" -R, --recursive recursively unmount a target with all its children\n"
-msgstr ""
+#: sys-utils/chmem.c:156 sys-utils/chmem.c:242
+#, fuzzy, c-format
+msgid "%s enabled\n"
+msgstr "CPU %d 已啟用\n"
-#: sys-utils/umount.c:94
-#, fuzzy
-msgid ""
-" -r, --read-only in case unmounting fails, try to remount read-only\n"
-msgstr " -s --shared 提取共享的鎖定\n"
+#: sys-utils/chmem.c:158 sys-utils/chmem.c:244
+#, fuzzy, c-format
+msgid "%s disabled\n"
+msgstr "CPU %d 已停用\n"
-#: sys-utils/umount.c:95
-#, fuzzy
-msgid " -t, --types <list> limit the set of filesystem types\n"
-msgstr " l 列出已知檔案系統類型"
+#: sys-utils/chmem.c:170
+#, c-format
+msgid "Could only enable %s of memory"
+msgstr ""
-#: sys-utils/umount.c:96
-#, fuzzy
-msgid " -v, --verbose say what is being done\n"
-msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+#: sys-utils/chmem.c:172
+#, c-format
+msgid "Could only disable %s of memory"
+msgstr ""
-#: sys-utils/umount.c:140
+#: sys-utils/chmem.c:206
#, fuzzy, c-format
-msgid "%s (%s) unmounted"
-msgstr "%s 被掛載\n"
+msgid "%s already enabled\n"
+msgstr "CPU %d 已經已啟用\n"
-#: sys-utils/umount.c:142
+#: sys-utils/chmem.c:208
#, fuzzy, c-format
-msgid "%s unmounted"
-msgstr "%s：無法掛載"
+msgid "%s already disabled\n"
+msgstr "CPU %d 已經已停用\n"
-#: sys-utils/umount.c:207
+#: sys-utils/chmem.c:218
#, fuzzy, c-format
-msgid "%s: umount failed"
-msgstr "%s：umount 失敗"
+msgid "%s enable failed: Zone mismatch"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: sys-utils/umount.c:216
+#: sys-utils/chmem.c:222
#, fuzzy, c-format
-msgid "%s: filesystem was unmounted, but mount(8) failed"
-msgstr "%s：檔案系統 umounted，但是掛載 (8) 失敗"
+msgid "%s disable failed: Zone mismatch"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: sys-utils/umount.c:230
+#: sys-utils/chmem.c:237
#, fuzzy, c-format
-msgid "%s: invalid block device"
-msgstr "%s：無效的區塊裝置"
+msgid "%s enable failed"
+msgstr "CPU %d 啟用失敗 (%m)\n"
-#: sys-utils/umount.c:236
+#: sys-utils/chmem.c:239
#, fuzzy, c-format
-msgid "%s: can't write superblock"
-msgstr "%s：無法寫入超區塊"
+msgid "%s disable failed"
+msgstr "CPU %d 停用失敗 (%m)\n"
-#: sys-utils/umount.c:239
+#: sys-utils/chmem.c:274 sys-utils/lsmem.c:503
#, fuzzy, c-format
-msgid ""
-"%s: target is busy\n"
-" (In some cases useful info about processes that\n"
-" use the device is found by lsof(8) or fuser(1).)"
+msgid "Failed to read %s"
+msgstr "讀取速度時失敗"
+
+#: sys-utils/chmem.c:280
+#, fuzzy
+msgid "Failed to parse block number"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/chmem.c:285
+#, fuzzy
+msgid "Failed to parse size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/chmem.c:289
+#, c-format
+msgid "Size must be aligned to memory block size (%s)"
msgstr ""
-"%s：目標忙碌中。\n"
-" (在某些情況下有用資訊關於行程該使用\n"
-" 裝置是找到由 lsof (8) 或 fuser (1))"
-#: sys-utils/umount.c:246
-#, fuzzy, c-format
-msgid "%s: mountpoint not found"
-msgstr "%s：找不到"
+#: sys-utils/chmem.c:298
+#, fuzzy
+msgid "Failed to parse start"
+msgstr "剖析開始時失敗"
-#: sys-utils/umount.c:248
+#: sys-utils/chmem.c:299
#, fuzzy
-msgid "undefined mountpoint"
-msgstr "mountpoint"
+msgid "Failed to parse end"
+msgstr "剖析結束時失敗"
-#: sys-utils/umount.c:251
+#: sys-utils/chmem.c:303
#, fuzzy, c-format
-msgid "%s: must be superuser to unmount"
-msgstr "%s：必須是系統管理者到 umount"
+msgid "Invalid start address format: %s"
+msgstr "無效的開始引數"
-#: sys-utils/umount.c:254
+#: sys-utils/chmem.c:305
#, fuzzy, c-format
-msgid "%s: block devices are not permitted on filesystem"
-msgstr "%s：區塊裝置無法允許的於 fs"
+msgid "Invalid end address format: %s"
+msgstr "無效的 sigval 引數"
-#: sys-utils/umount.c:303
+#: sys-utils/chmem.c:306
#, fuzzy
-msgid "failed to set umount target"
-msgstr "設定 umount 目標時失敗"
+msgid "Failed to parse start address"
+msgstr "剖析開始時失敗"
-#: sys-utils/umount.c:319
+#: sys-utils/chmem.c:307
#, fuzzy
-msgid "libmount table allocation failed"
-msgstr "libmount 語境配額失敗"
+msgid "Failed to parse end address"
+msgstr "剖析結束時失敗"
-#: sys-utils/umount.c:362 sys-utils/umount.c:440
-#, fuzzy
-msgid "libmount iterator allocation failed"
-msgstr "libmount 語境配額失敗"
+#: sys-utils/chmem.c:310
+#, c-format
+msgid "Start address and (end address + 1) must be aligned to memory block size (%s)"
+msgstr ""
-#: sys-utils/umount.c:368
+#: sys-utils/chmem.c:324
#, fuzzy, c-format
-msgid "failed to get child fs of %s"
-msgstr "提取舊的 %s 限制時失敗"
+msgid "Invalid parameter: %s"
+msgstr "無效的引數：%s"
-#: sys-utils/umount.c:436
+#: sys-utils/chmem.c:331
#, fuzzy, c-format
-msgid "%s: failed to determine source"
-msgstr "%s：無法讀取速度"
+msgid "Invalid range: %s"
+msgstr "無效的引數：%s"
-#: sys-utils/unshare.c:45
-#, fuzzy
-msgid " -m, --mount unshare mounts namespace\n"
-msgstr " -m, --shmems 共用記憶體資料段\n"
+#: sys-utils/chmem.c:340
+#, fuzzy, c-format
+msgid " %s [options] [SIZE|RANGE|BLOCKRANGE]\n"
+msgstr " %s [選項] [y|n]\n"
-#: sys-utils/unshare.c:46
-#, fuzzy
-msgid " -u, --uts unshare UTS namespace (hostname etc)\n"
-msgstr " -m, --shmems 共用記憶體資料段\n"
+#: sys-utils/chmem.c:343
+msgid "Set a particular size or range of memory online or offline.\n"
+msgstr ""
-#: sys-utils/unshare.c:47
+#: sys-utils/chmem.c:346
#, fuzzy
-msgid " -i, --ipc unshare System V IPC namespace\n"
-msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+msgid " -e, --enable enable memory\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/unshare.c:48
+#: sys-utils/chmem.c:347
#, fuzzy
-msgid " -n, --net unshare network namespace\n"
-msgstr " -n, --noparity 設定同位到無\n"
+msgid " -d, --disable disable memory\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/unshare.c:49
+#: sys-utils/chmem.c:348
#, fuzzy
-msgid " -p, --pid unshare pid namespace\n"
-msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+msgid " -b, --blocks use memory blocks\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/unshare.c:50
-#, fuzzy
-msgid " -U, --user unshare user namespace\n"
-msgstr " -m, --shmems 共用記憶體資料段\n"
+#: sys-utils/chmem.c:349
+msgid " -z, --zone <name> select memory zone (see below)\n"
+msgstr ""
-#: sys-utils/unshare.c:51
+#: sys-utils/chmem.c:350
#, fuzzy
-msgid " -f, --fork fork before launching <program>\n"
-msgstr " -r, --reset 重置通訊埠\n"
+msgid " -v, --verbose verbose output\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
-#: sys-utils/unshare.c:52
+#: sys-utils/chmem.c:353
+#, fuzzy
msgid ""
-" --mount-proc[=<dir>] mount proc filesystem first (implies --mount)\n"
+"\n"
+"Supported zones:\n"
msgstr ""
+"\n"
+"支援的記錄檔機能：\n"
-#: sys-utils/unshare.c:128
-msgid "unshare failed"
-msgstr "unshare 失敗"
+#: sys-utils/chmem.c:394 sys-utils/lscpu-cputype.c:889 sys-utils/lsmem.c:667
+#, fuzzy, c-format
+msgid "failed to initialize %s handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
-#: sys-utils/unshare.c:146
-#, fuzzy
-msgid "child exit failed"
-msgstr "識別號失敗"
+#: sys-utils/chmem.c:440
+msgid "zone ignored, no valid_zones sysfs attribute present"
+msgstr ""
-#: sys-utils/unshare.c:153
+#: sys-utils/chmem.c:445
#, fuzzy, c-format
-msgid "mount %s failed"
-msgstr "掛載失敗"
+msgid "unknown memory zone: %s"
+msgstr "不明優先權名稱：%s。"
+
+#: sys-utils/choom.c:38
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] -p pid\n"
+" %1$s [options] -n number -p pid\n"
+" %1$s [options] -n number [--] command [args...]]\n"
+msgstr ""
+" %1$s [選項]\n"
+" %1$s [選項] <device>|<mountpoint>\n"
+" %1$s [選項]<裝置><mountpoint>\n"
+" %1$s [選項] [--source<裝置>] [--target<mountpoint>]\n"
+
+#: sys-utils/choom.c:44
+msgid "Display and adjust OOM-killer score.\n"
+msgstr ""
-#: sys-utils/wdctl.c:67
+#: sys-utils/choom.c:47
#, fuzzy
-msgid "Card previously reset the CPU"
-msgstr "卡在之前重置 CPU"
+msgid " -n, --adjust <num> specify the adjust score value\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
-#: sys-utils/wdctl.c:68
+#: sys-utils/choom.c:48
#, fuzzy
-msgid "External relay 1"
-msgstr "外部中繼 1"
+msgid " -p, --pid <num> process ID\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
-#: sys-utils/wdctl.c:69
+#: sys-utils/choom.c:60
#, fuzzy
-msgid "External relay 2"
-msgstr "外部中繼 2"
+msgid "failed to read OOM score value"
+msgstr "讀取速度時失敗"
-#: sys-utils/wdctl.c:70
+#: sys-utils/choom.c:70
#, fuzzy
-msgid "Fan failed"
-msgstr "影迷失敗"
+msgid "failed to read OOM score adjust value"
+msgstr "讀取速度時失敗"
-#: sys-utils/wdctl.c:71
+#: sys-utils/choom.c:105
#, fuzzy
-msgid "Keep alive ping reply"
-msgstr "保持活動狀態 ping 回覆"
+msgid "invalid adjust argument"
+msgstr "無效的前端引數"
-#: sys-utils/wdctl.c:72
+#: sys-utils/choom.c:119 term-utils/mesg.c:178
+#, fuzzy, c-format
+msgid "invalid argument: %s"
+msgstr "無效的引數：%s"
+
+#: sys-utils/choom.c:123
#, fuzzy
-msgid "Supports magic close char"
-msgstr "æ\94¯æ\8f´é\94è¡\93é\97\9cé\96\89å\97å\85\83"
+msgid "no PID or COMMAND specified"
+msgstr "æ²\92æ\9c\89 mountpoint æ\8c\87å®\9aç\9a\84ã\80\82"
-#: sys-utils/wdctl.c:73
+#: sys-utils/choom.c:127
#, fuzzy
-msgid "Reset due to CPU overheat"
-msgstr "重置由於 CPU overheat"
+msgid "no OOM score adjust value specified"
+msgstr "指定了無效的偏移值"
-#: sys-utils/wdctl.c:74
+#: sys-utils/choom.c:135
+#, fuzzy, c-format
+msgid "pid %d's current OOM score: %d\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
+
+#: sys-utils/choom.c:136
+#, fuzzy, c-format
+msgid "pid %d's current OOM score adjust value: %d\n"
+msgstr "pid %d 目前的排程優先權：%d\n"
+
+#: sys-utils/choom.c:143 sys-utils/choom.c:150
#, fuzzy
-msgid "Power over voltage"
-msgstr "乘冪之上 voltage"
+msgid "failed to set score adjust value"
+msgstr "設定路徑時失敗"
-#: sys-utils/wdctl.c:75
+#: sys-utils/choom.c:145
+#, c-format
+msgid "pid %d's OOM score adjust value changed from %d to %d\n"
+msgstr ""
+
+#: sys-utils/ctrlaltdel.c:28
+#, fuzzy, c-format
+msgid " %s hard|soft\n"
+msgstr " %s <hard|soft>\n"
+
+#: sys-utils/ctrlaltdel.c:31
+#, c-format
+msgid "Set the function of the Ctrl-Alt-Del combination.\n"
+msgstr ""
+
+#: sys-utils/ctrlaltdel.c:54
+msgid "implicit"
+msgstr ""
+
+#: sys-utils/ctrlaltdel.c:55
+#, fuzzy, c-format
+msgid "unexpected value in %s: %ju"
+msgstr "未預期的檔案結束於 %s"
+
+#: sys-utils/ctrlaltdel.c:66
#, fuzzy
-msgid "Power bad/power fault"
-msgstr "乘冪不當的/乘冪失誤"
+msgid "You must be root to set the Ctrl-Alt-Del behavior"
+msgstr "您必須是根到設定 Ctrl-Alt-Del 行為"
-#: sys-utils/wdctl.c:76
+#: sys-utils/ctrlaltdel.c:74 sys-utils/ipcrm.c:396 sys-utils/ipcrm.c:419
+#, fuzzy, c-format
+msgid "unknown argument: %s"
+msgstr "不明引數：%s"
+
+#: sys-utils/dmesg.c:110
#, fuzzy
-msgid "Pretimeout (in seconds)"
-msgstr "Pretimeout (的秒數)"
+msgid "system is unusable"
+msgstr "系統是無法使用"
-#: sys-utils/wdctl.c:77
+#: sys-utils/dmesg.c:111
#, fuzzy
-msgid "Set timeout (in seconds)"
-msgstr "設定逾時 (的秒數)"
+msgid "action must be taken immediately"
+msgstr "動作必須被佔用即時"
-#: sys-utils/wdctl.c:78
-msgid "Not trigger reboot"
-msgstr ""
+#: sys-utils/dmesg.c:112
+#, fuzzy
+msgid "critical conditions"
+msgstr "重要條件"
-#: sys-utils/wdctl.c:94
+#: sys-utils/dmesg.c:113
#, fuzzy
-msgid "flag name"
-msgstr "æ\97\97æ¨\99å\90\8d稱"
+msgid "error conditions"
+msgstr "æ¢\9d件æ\99\82ç\99¼ç\94\9fé\8c¯èª¤"
-#: sys-utils/wdctl.c:95
+#: sys-utils/dmesg.c:114
#, fuzzy
-msgid "flag description"
-msgstr "旗標描述"
+msgid "warning conditions"
+msgstr "警告條件"
-#: sys-utils/wdctl.c:96
+#: sys-utils/dmesg.c:115
#, fuzzy
-msgid "flag status"
-msgstr "旗標狀態"
+msgid "normal but significant condition"
+msgstr "一般但是顯著的條件"
-#: sys-utils/wdctl.c:97
+#: sys-utils/dmesg.c:116
#, fuzzy
-msgid "flag boot status"
-msgstr "旗標開機狀態"
+msgid "informational"
+msgstr "參考性"
-#: sys-utils/wdctl.c:98
+#: sys-utils/dmesg.c:117
#, fuzzy
-msgid "watchdog device name"
-msgstr "監視程式裝置名稱"
+msgid "debug-level messages"
+msgstr "debug-level 訊息"
-#: sys-utils/wdctl.c:132
-#, fuzzy, c-format
-msgid "unknown flag: %s"
-msgstr "不明旗標：%s"
+#: sys-utils/dmesg.c:131
+#, fuzzy
+msgid "kernel messages"
+msgstr "內核訊息"
-#: sys-utils/wdctl.c:173
+#: sys-utils/dmesg.c:132
#, fuzzy
-msgid ""
-" -f, --flags <list> print selected flags only\n"
-" -F, --noflags don't print information about flags\n"
-" -I, --noident don't print watchdog identity information\n"
-" -n, --noheadings don't print headings for flags table\n"
-" -O, --oneline print all information on one line\n"
-" -o, --output <list> output columns of the flags\n"
-" -r, --raw use raw output format for flags table\n"
-" -T, --notimeouts don't print watchdog timeouts\n"
-" -s, --settimeout <sec> set watchdog timeout\n"
-" -x, --flags-only print only flags table (same as -I -T)\n"
-msgstr ""
-" -f, --flags <list> 列印已選旗標只有\n"
-" -F, --noflags 不列印相關資訊旗標\n"
-" -I, --noident 不列印監視程式身分資訊\n"
-" -n, --noheadings 不列印標頭用於旗標表格\n"
-" -O, --oneline 列印所有資訊於一個列\n"
-" -o, --output<清單> 輸出欄位的旗標\n"
-" -r, --raw 使用原始輸出格式用於旗標表格\n"
-" -T, --notimeouts 不列印監視程式逾時\n"
-" -s, --settimeout<sec>設定監視程式逾時\n"
-" -x, --flags-only 列印只有旗標表格 (如同 -I -T)\n"
+msgid "random user-level messages"
+msgstr "隨機使用者級訊息"
-#: sys-utils/wdctl.c:189
-#, fuzzy, c-format
-msgid "The default device is %s.\n"
-msgstr "é \90è¨è£\9dç½®æ\98¯ %sã\80\82\n"
+#: sys-utils/dmesg.c:133
+#, fuzzy
+msgid "mail system"
+msgstr "é\83µä»¶ç³»çµ±"
-#: sys-utils/wdctl.c:192
+#: sys-utils/dmesg.c:134
#, fuzzy
-msgid "Available columns:\n"
-msgstr "可用欄位：\n"
+msgid "system daemons"
+msgstr "系統守護程式"
-#: sys-utils/wdctl.c:278
-#, fuzzy, c-format
-msgid "%s: unknown flags 0x%x\n"
-msgstr "%s：不明旗標 0x%x\n"
+#: sys-utils/dmesg.c:135
+#, fuzzy
+msgid "security/authorization messages"
+msgstr "安全/授權訊息"
-#: sys-utils/wdctl.c:308 sys-utils/wdctl.c:363
-#, fuzzy, c-format
-msgid "%s: watchdog already in use, terminating."
-msgstr "%s：監視程式已在使用中，終止。"
+#: sys-utils/dmesg.c:136
+#, fuzzy
+msgid "messages generated internally by syslogd"
+msgstr "訊息產生的內部由 syslogd"
-#: sys-utils/wdctl.c:322 sys-utils/wdctl.c:391
-#, fuzzy, c-format
-msgid "%s: failed to disarm watchdog"
-msgstr "%s：無法 disarm 監視程式"
+#: sys-utils/dmesg.c:137
+#, fuzzy
+msgid "line printer subsystem"
+msgstr "列印表機子系統"
-#: sys-utils/wdctl.c:331
-#, fuzzy, c-format
-msgid "cannot set timeout for %s"
-msgstr "ç\84¡æ³\95è¨å®\9aé\80¾æ\99\82ç\94¨æ\96¼ %s"
+#: sys-utils/dmesg.c:138
+#, fuzzy
+msgid "network news subsystem"
+msgstr "網路æ\96°è\81\9eå\90系統"
-#: sys-utils/wdctl.c:370
-#, fuzzy, c-format
-msgid "%s: failed to get information about watchdog"
-msgstr "%s：無法提取相關資訊監視程式"
+#: sys-utils/dmesg.c:139
+#, fuzzy
+msgid "UUCP subsystem"
+msgstr "UUCP 子系統"
-#: sys-utils/wdctl.c:452 sys-utils/wdctl.c:454 sys-utils/wdctl.c:456
-#, fuzzy, c-format
-msgid "%-15s%2i seconds\n"
-msgstr "%-15s%2i 秒\n"
+#: sys-utils/dmesg.c:140
+#, fuzzy
+msgid "clock daemon"
+msgstr "時鐘守護程式"
-#: sys-utils/wdctl.c:452
+#: sys-utils/dmesg.c:141
#, fuzzy
-msgid "Timeout:"
-msgstr "逾時："
+msgid "security/authorization messages (private)"
+msgstr "安全/授權訊息 (私人的)"
-#: sys-utils/wdctl.c:454
+#: sys-utils/dmesg.c:142
#, fuzzy
-msgid "Pre-timeout:"
-msgstr "Pre-timeout："
+msgid "FTP daemon"
+msgstr "檔案傳輸通訊協定守護程式"
-#: sys-utils/wdctl.c:456
+#: sys-utils/dmesg.c:279
+msgid "Display or control the kernel ring buffer.\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:282
#, fuzzy
-msgid "Timeleft:"
-msgstr "Timeleft："
+msgid " -C, --clear clear the kernel ring buffer\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: sys-utils/wdctl.c:590
+#: sys-utils/dmesg.c:283
#, fuzzy
-msgid "Device:"
-msgstr "裝置："
+msgid " -c, --read-clear read and clear all messages\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
-#: sys-utils/wdctl.c:592
-msgid "Identity:"
-msgstr ""
+#: sys-utils/dmesg.c:284
+#, fuzzy
+msgid " -D, --console-off disable printing messages to console\n"
+msgstr " -s 列印訊息到標準輸出\n"
-#: sys-utils/wdctl.c:594
-msgid "version"
+#: sys-utils/dmesg.c:285
+#, fuzzy
+msgid " -E, --console-on enable printing messages to console\n"
+msgstr " -s 列印訊息到標準輸出\n"
+
+#: sys-utils/dmesg.c:286
+msgid " -F, --file <file> use the file instead of the kernel log buffer\n"
msgstr ""
-#: term-utils/agetty.c:402
-#, c-format
-msgid "%s%s (automatic login)\n"
+#: sys-utils/dmesg.c:287
+msgid " -f, --facility <list> restrict output to defined facilities\n"
msgstr ""
-#: term-utils/agetty.c:456
-#, fuzzy, c-format
-msgid "%s: can't change root directory %s: %m"
-msgstr "%s：無法變更根目錄 %s：%m"
+#: sys-utils/dmesg.c:288
+#, fuzzy
+msgid " -H, --human human readable output\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/dmesg.c:289
+#, fuzzy
+msgid " -J, --json use JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
-#: term-utils/agetty.c:461
+#: sys-utils/dmesg.c:290
+#, fuzzy
+msgid " -k, --kernel display kernel messages\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: sys-utils/dmesg.c:292
#, fuzzy, c-format
-msgid "%s: can't change working directory %s: %m"
-msgstr "%s：無法變更工作目錄 %s：%m"
+msgid " -L, --color[=<when>] colorize messages (%s, %s or %s)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/dmesg.c:295
+msgid " -l, --level <list> restrict output to defined levels\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:296
+msgid " -n, --console-level <level> set level of messages printed to console\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:297
+#, fuzzy
+msgid " -P, --nopager do not pipe output into a pager\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/dmesg.c:298
+msgid " -p, --force-prefix force timestamp output on each line of multi-line messages\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:299
+#, fuzzy
+msgid " -r, --raw print the raw message buffer\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/dmesg.c:300
+#, fuzzy
+msgid " --noescape don't escape unprintable character\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/dmesg.c:301
+#, fuzzy
+msgid " -S, --syslog force to use syslog(2) rather than /dev/kmsg\n"
+msgstr " -s, --status 查詢印表機狀態\n"
+
+#: sys-utils/dmesg.c:302
+msgid " -s, --buffer-size <size> buffer size to query the kernel ring buffer\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:303
+#, fuzzy
+msgid " -u, --userspace display userspace messages\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/dmesg.c:304
+#, fuzzy
+msgid " -w, --follow wait for new messages\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+
+#: sys-utils/dmesg.c:305
+#, fuzzy
+msgid " -W, --follow-new wait and print only new messages\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+
+#: sys-utils/dmesg.c:306
+msgid " -x, --decode decode facility and level to readable string\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:307
+#, fuzzy
+msgid " -d, --show-delta show time delta between printed messages\n"
+msgstr " -s, --status 查詢印表機狀態\n"
+
+#: sys-utils/dmesg.c:308
+msgid " -e, --reltime show local time and time delta in readable format\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:309
+#, fuzzy
+msgid " -T, --ctime show human-readable timestamp (may be inaccurate!)\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/dmesg.c:310
+#, fuzzy
+msgid " -t, --notime don't show any timestamp with messages\n"
+msgstr " -u, --unquote 不引言輸出\n"
-#: term-utils/agetty.c:466
+#: sys-utils/dmesg.c:311
+msgid ""
+" --time-format <format> show timestamp using the given format:\n"
+" [delta|reltime|ctime|notime|iso]\n"
+"Suspending/resume will make ctime and iso timestamps inaccurate.\n"
+msgstr ""
+
+#: sys-utils/dmesg.c:314
+#, fuzzy
+msgid " --since <time> display the lines since the specified time\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: sys-utils/dmesg.c:315
+#, fuzzy
+msgid " --until <time> display the lines until the specified time\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: sys-utils/dmesg.c:319
+#, fuzzy
+msgid ""
+"\n"
+"Supported log facilities:\n"
+msgstr ""
+"\n"
+"支援的記錄檔機能：\n"
+
+#: sys-utils/dmesg.c:325
+#, fuzzy
+msgid ""
+"\n"
+"Supported log levels (priorities):\n"
+msgstr ""
+"\n"
+"支援的記錄檔等級 (優先等級)：\n"
+
+#: sys-utils/dmesg.c:379
#, fuzzy, c-format
-msgid "%s: can't change process priority: %m"
-msgstr "%s：無法變更處理優先權：%m"
+msgid "failed to parse level '%s'"
+msgstr "剖析等級『%s 時失敗』"
+
+#: sys-utils/dmesg.c:381
+#, fuzzy, c-format
+msgid "unknown level '%s'"
+msgstr "不明等級『%s』"
+
+#: sys-utils/dmesg.c:417
+#, fuzzy, c-format
+msgid "failed to parse facility '%s'"
+msgstr "剖析機能『%s 時失敗』"
+
+#: sys-utils/dmesg.c:419
+#, fuzzy, c-format
+msgid "unknown facility '%s'"
+msgstr "不明機能『%s』"
+
+#: sys-utils/dmesg.c:547
+#, fuzzy, c-format
+msgid "cannot mmap: %s"
+msgstr "無法 mmap：%s"
+
+#. TRANSLATORS: dmesg uses strftime() fo generate date-time string
+#. where %a is abbreviated name of the day, %b is abbreviated month
+#. name and %e is day of the month as a decimal number. Please, set
+#. proper month/day order here
+#: sys-utils/dmesg.c:863
+msgid "%a %b %e %H:%M:%S %Y"
+msgstr ""
+
+#. TRANSLATORS: dmesg uses strftime() fo generate date-time string
+#. where: %b is abbreviated month and %e is day of the month as a
+#. decimal number. Please, set proper month/day order here.
+#: sys-utils/dmesg.c:873
+msgid "%b%e %H:%M"
+msgstr ""
+
+#: sys-utils/dmesg.c:1526
+#, fuzzy
+msgid "invalid buffer size argument"
+msgstr "無效的緩衝區大小引數"
+
+#: sys-utils/dmesg.c:1612
+#, fuzzy
+msgid "--show-delta is ignored when used together with iso8601 time format"
+msgstr "--reltime 無法使用的一起與 --ctime "
+
+#: sys-utils/dmesg.c:1636
+#, fuzzy
+msgid "--raw can be used together with --level or --facility only when reading messages from /dev/kmsg"
+msgstr "--raw 無法使用的一起與等級、機能、解碼、delta，ctime 或 notime 選項"
+
+#: sys-utils/dmesg.c:1656
+#, fuzzy
+msgid "read kernel buffer failed"
+msgstr "讀取內核緩衝區失敗"
+
+#: sys-utils/dmesg.c:1664
+#, fuzzy
+msgid "clear kernel buffer failed"
+msgstr "讀取內核緩衝區失敗"
+
+#: sys-utils/dmesg.c:1680
+#, fuzzy
+msgid "klogctl failed"
+msgstr "klogctl 失敗"
+
+#: sys-utils/eject.c:140
+#, fuzzy, c-format
+msgid " %s [options] [<device>|<mountpoint>]\n"
+msgstr " %s [選項] [<device>|<mountpoint>]\n"
+
+#: sys-utils/eject.c:143
+#, fuzzy
+msgid "Eject removable media.\n"
+msgstr "可移除的裝置"
+
+#: sys-utils/eject.c:146
+#, fuzzy
+msgid ""
+" -a, --auto <on|off> turn auto-eject feature on or off\n"
+" -c, --changerslot <slot> switch discs on a CD-ROM changer\n"
+" -d, --default display default device\n"
+" -f, --floppy eject floppy\n"
+" -F, --force don't care about device type\n"
+" -i, --manualeject <on|off> toggle manual eject protection on/off\n"
+" -m, --no-unmount do not unmount device even if it is mounted\n"
+" -M, --no-partitions-unmount do not unmount another partitions\n"
+" -n, --noop don't eject, just show device found\n"
+" -p, --proc use /proc/mounts instead of /etc/mtab\n"
+" -q, --tape eject tape\n"
+" -r, --cdrom eject CD-ROM\n"
+" -s, --scsi eject SCSI device\n"
+" -t, --trayclose close tray\n"
+" -T, --traytoggle toggle tray\n"
+" -v, --verbose enable verbose output\n"
+" -x, --cdspeed <speed> set CD-ROM max speed\n"
+" -X, --listspeed list CD-ROM available speeds\n"
+msgstr ""
+" -a, --auto <on|off> 輪值 auto-eject 特徵開或關\n"
+" -c, --changerslot<插槽> 切換碟片於唯讀光碟機 changer\n"
+" -d, --default 顯示預設裝置\n"
+" -f, --floppy 退出軟碟\n"
+" -F, --force 不要去管裝置類型\n"
+" -i, --manualeject<於|關閉> 切換手動退出保護開/關\n"
+" -m, --no-unmount 不卸載裝置即使它被掛載\n"
+" -M, --no-partitions-unmount 不卸載另外的分割區\n"
+" -n, --noop 不退出，僅顯示裝置找到\n"
+" -p, --proc 使用/proc/掛載以代替/etc/mtab\n"
+" -q, --tape 退出磁帶\n"
+" -r, --cdrom 退出唯讀光碟機\n"
+" -s, --scsi 退出 SCSI 裝置\n"
+" -t, --trayclose 關閉托盤\n"
+" -T, --traytoggle 切換托盤\n"
+" -v, --verbose 啟用詳細的輸出\n"
+" -x, --cdspeed<速度> 設定唯讀光碟機最大速度\n"
+" -X, --listspeed 清單唯讀光碟機可用速度\n"
+
+#: sys-utils/eject.c:169
+#, fuzzy
+msgid ""
+"\n"
+"By default tries -r, -s, -f, and -q in order until success.\n"
+msgstr ""
+"\n"
+"按照預設嘗試 -r, -s, -f, 和 -q 在中排序直到成功。\n"
+
+#: sys-utils/eject.c:215
+#, fuzzy
+msgid "invalid argument to --changerslot/-c option"
+msgstr "無效的引數到 --changerslot /-c 選項"
+
+#: sys-utils/eject.c:219
+#, fuzzy
+msgid "invalid argument to --cdspeed/-x option"
+msgstr "無效的引數到 --cdspeed /-x 選項"
+
+#: sys-utils/eject.c:327
+#, fuzzy
+msgid "CD-ROM auto-eject command failed"
+msgstr "唯讀光碟機 auto-eject 命令失敗"
+
+#: sys-utils/eject.c:341
+#, fuzzy
+msgid "CD-ROM door lock is not supported"
+msgstr "光碟機不是就緒"
+
+#: sys-utils/eject.c:343
+msgid "other users have the drive open and not CAP_SYS_ADMIN"
+msgstr ""
+
+#: sys-utils/eject.c:345
+#, fuzzy
+msgid "CD-ROM lock door command failed"
+msgstr "唯讀光碟機鎖定匣門命令失敗"
+
+#: sys-utils/eject.c:350
+#, fuzzy
+msgid "CD-Drive may NOT be ejected with device button"
+msgstr "CD-Drive 可能無法被退出與裝置按鈕"
+
+#: sys-utils/eject.c:352
+#, fuzzy
+msgid "CD-Drive may be ejected with device button"
+msgstr "CD-Drive 也許會被退出與裝置按鈕"
+
+#: sys-utils/eject.c:363
+#, fuzzy
+msgid "CD-ROM select disc command failed"
+msgstr "唯讀光碟機選取碟片命令失敗"
+
+#: sys-utils/eject.c:367
+#, fuzzy
+msgid "CD-ROM load from slot command failed"
+msgstr "唯讀光碟機載入從插槽命令失敗"
+
+#: sys-utils/eject.c:369
+#, fuzzy
+msgid "IDE/ATAPI CD-ROM changer not supported by this kernel\n"
+msgstr "整合開發環境/ATAPI 唯讀光碟機 changer 不支援由這個內核\n"
+
+#: sys-utils/eject.c:387
+#, fuzzy
+msgid "CD-ROM tray close command failed"
+msgstr "唯讀光碟機托盤關閉命令失敗"
+
+#: sys-utils/eject.c:389
+#, fuzzy
+msgid "CD-ROM tray close command not supported by this kernel\n"
+msgstr "唯讀光碟機托盤關閉命令不支援由這個內核\n"
+
+#: sys-utils/eject.c:406
+#, fuzzy
+msgid "CD-ROM eject unsupported"
+msgstr "唯讀光碟機退出不受支援的"
+
+#: sys-utils/eject.c:434 sys-utils/eject.c:457 sys-utils/eject.c:1018
+#, fuzzy
+msgid "CD-ROM eject command failed"
+msgstr "唯讀光碟機退出命令失敗"
+
+#: sys-utils/eject.c:437
+#, fuzzy
+msgid "no CD-ROM information available"
+msgstr "沒有唯讀光碟機資訊可用"
+
+#: sys-utils/eject.c:440
+#, fuzzy
+msgid "CD-ROM drive is not ready"
+msgstr "光碟機不是就緒"
+
+#: sys-utils/eject.c:443
+#, fuzzy
+msgid "CD-ROM status command failed"
+msgstr "唯讀光碟機退出命令失敗"
+
+#: sys-utils/eject.c:483
+#, fuzzy
+msgid "CD-ROM select speed command failed"
+msgstr "唯讀光碟機選取速度命令失敗"
+
+#: sys-utils/eject.c:485
+#, fuzzy
+msgid "CD-ROM select speed command not supported by this kernel"
+msgstr "唯讀光碟機選取速度命令不支援由這個內核"
+
+#: sys-utils/eject.c:522
+#, fuzzy, c-format
+msgid "%s: failed to finding CD-ROM name"
+msgstr "%s：無法尋找唯讀光碟機名稱"
+
+#: sys-utils/eject.c:539
+#, fuzzy, c-format
+msgid "%s: failed to read speed"
+msgstr "%s：無法讀取速度"
+
+#: sys-utils/eject.c:545
+#, fuzzy
+msgid "failed to read speed"
+msgstr "讀取速度時失敗"
+
+#: sys-utils/eject.c:585
+#, fuzzy
+msgid "not an sg device, or old sg driver"
+msgstr "不是 sg 裝置，或舊的 sg 驅動程式"
+
+#: sys-utils/eject.c:657
+#, fuzzy, c-format
+msgid "%s: unmounting"
+msgstr "%s：卸載"
+
+#: sys-utils/eject.c:662 sys-utils/mount.c:59 sys-utils/umount.c:122
+#: text-utils/more.c:1271
+#, fuzzy
+msgid "drop permissions failed"
+msgstr "權限被拒"
+
+#: sys-utils/eject.c:671
+#, fuzzy
+msgid "unable to fork"
+msgstr "無法衍生"
+
+#: sys-utils/eject.c:678
+#, fuzzy, c-format
+msgid "unmount of `%s' did not exit normally"
+msgstr "卸載的『%s』並未正常離開"
+
+#: sys-utils/eject.c:681
+#, fuzzy, c-format
+msgid "unmount of `%s' failed\n"
+msgstr "卸載的『%s』失敗\n"
+
+#: sys-utils/eject.c:726
+#, fuzzy
+msgid "failed to parse mount table"
+msgstr "剖析掛載表時失敗"
+
+#: sys-utils/eject.c:792 sys-utils/eject.c:894
+#, fuzzy, c-format
+msgid "%s: mounted on %s"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/eject.c:835
+#, fuzzy
+msgid "setting CD-ROM speed to auto"
+msgstr "設定唯讀光碟機速度到自動"
+
+#: sys-utils/eject.c:837
+#, fuzzy, c-format
+msgid "setting CD-ROM speed to %ldX"
+msgstr "設定唯讀光碟機速度到 %ldX"
+
+#: sys-utils/eject.c:863
+#, fuzzy, c-format
+msgid "default device: `%s'"
+msgstr "預設裝置：『%s』"
+
+#: sys-utils/eject.c:869
+#, fuzzy, c-format
+msgid "using default device `%s'"
+msgstr "使用預設裝置『%s』"
+
+#: sys-utils/eject.c:888
+#, fuzzy
+msgid "unable to find device"
+msgstr "%s：無法找到裝置"
+
+#: sys-utils/eject.c:890
+#, fuzzy, c-format
+msgid "device name is `%s'"
+msgstr "裝置名稱是『%s』"
+
+#: sys-utils/eject.c:896 sys-utils/umount.c:365 sys-utils/umount.c:389
+#, fuzzy, c-format
+msgid "%s: not mounted"
+msgstr "%s：無法掛載"
+
+#: sys-utils/eject.c:900
+#, fuzzy, c-format
+msgid "%s: disc device: %s (disk device will be used for eject)"
+msgstr "%s：碟片裝置：%s (磁碟裝置將被用於退出)"
+
+#: sys-utils/eject.c:908
+#, fuzzy, c-format
+msgid "%s: not found mountpoint or device with the given name"
+msgstr "%s：找不到 mountpoint 或裝置與給定的名稱"
+
+#: sys-utils/eject.c:911
+#, fuzzy, c-format
+msgid "%s: is whole-disk device"
+msgstr "%s：是 whole-disk 裝置"
+
+#: sys-utils/eject.c:915
+#, fuzzy, c-format
+msgid "%s: is not ejectable device"
+msgstr "%s：不是可熱插式的裝置"
+
+#: sys-utils/eject.c:919
+#, fuzzy, c-format
+msgid "device is `%s'"
+msgstr "裝置是『%s』"
+
+#: sys-utils/eject.c:920
+#, fuzzy
+msgid "exiting due to -n/--noop option"
+msgstr "離開由於 -n/--noop 選項"
+
+#: sys-utils/eject.c:934
+#, fuzzy, c-format
+msgid "%s: enabling auto-eject mode"
+msgstr "%s：啟用 auto-eject 模式"
+
+#: sys-utils/eject.c:936
+#, fuzzy, c-format
+msgid "%s: disabling auto-eject mode"
+msgstr "%s：停用 auto-eject 模式"
+
+#: sys-utils/eject.c:944
+#, fuzzy, c-format
+msgid "%s: closing tray"
+msgstr "%s：關閉托盤"
+
+#: sys-utils/eject.c:953
+#, fuzzy, c-format
+msgid "%s: toggling tray"
+msgstr "%s：切換托盤"
+
+#: sys-utils/eject.c:962
+#, fuzzy, c-format
+msgid "%s: listing CD-ROM speed"
+msgstr "%s：列表唯讀光碟機速度"
+
+#: sys-utils/eject.c:988
+#, fuzzy, c-format
+msgid "error: %s: device in use"
+msgstr "錯誤：%s：裝置在中使用"
+
+#: sys-utils/eject.c:999
+#, fuzzy, c-format
+msgid "%s: selecting CD-ROM disc #%ld"
+msgstr "%s：選取唯讀光碟機碟片 #%ld"
+
+#: sys-utils/eject.c:1015
+#, fuzzy, c-format
+msgid "%s: trying to eject using CD-ROM eject command"
+msgstr "%s：嘗試退出使用唯讀光碟機退出命令"
+
+#: sys-utils/eject.c:1017
+#, fuzzy
+msgid "CD-ROM eject command succeeded"
+msgstr "唯讀光碟機退出命令成功"
+
+#: sys-utils/eject.c:1022
+#, fuzzy, c-format
+msgid "%s: trying to eject using SCSI commands"
+msgstr "%s：嘗試退出使用 SCSI 命令"
+
+#: sys-utils/eject.c:1024
+#, fuzzy
+msgid "SCSI eject succeeded"
+msgstr "SCSI 退出成功"
+
+#: sys-utils/eject.c:1025
+#, fuzzy
+msgid "SCSI eject failed"
+msgstr "SCSI 退出失敗"
+
+#: sys-utils/eject.c:1029
+#, fuzzy, c-format
+msgid "%s: trying to eject using floppy eject command"
+msgstr "%s：嘗試退出使用軟碟退出命令"
+
+#: sys-utils/eject.c:1031
+#, fuzzy
+msgid "floppy eject command succeeded"
+msgstr "軟碟退出命令成功"
+
+#: sys-utils/eject.c:1032
+#, fuzzy
+msgid "floppy eject command failed"
+msgstr "軟碟退出命令失敗"
+
+#: sys-utils/eject.c:1036
+#, fuzzy, c-format
+msgid "%s: trying to eject using tape offline command"
+msgstr "%s：嘗試退出使用磁帶離線命令"
+
+#: sys-utils/eject.c:1038
+#, fuzzy
+msgid "tape offline command succeeded"
+msgstr "磁帶離線命令成功"
+
+#: sys-utils/eject.c:1039
+#, fuzzy
+msgid "tape offline command failed"
+msgstr "磁帶離線命令失敗"
+
+#: sys-utils/eject.c:1043
+#, fuzzy
+msgid "unable to eject"
+msgstr "無法退出"
+
+#: sys-utils/fallocate.c:84
+#, fuzzy, c-format
+msgid " %s [options] <filename>\n"
+msgstr " %s [選項] <filename>\n"
+
+#: sys-utils/fallocate.c:87
+msgid "Preallocate space to, or deallocate space from a file.\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:90
+msgid " -c, --collapse-range remove a range from the file\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:91
+msgid " -d, --dig-holes detect zeroes and replace with holes\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:92
+msgid " -i, --insert-range insert a hole at range, shifting existing data\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:93
+msgid " -l, --length <num> length for range operations, in bytes\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:94
+msgid " -n, --keep-size maintain the apparent size of the file\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:95
+#, fuzzy
+msgid " -o, --offset <num> offset for range operations, in bytes\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/fallocate.c:96
+msgid " -p, --punch-hole replace a range with a hole (implies -n)\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:97
+msgid " -z, --zero-range zero and ensure allocation of a range\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:99
+#, fuzzy
+msgid " -x, --posix use posix_fallocate(3) instead of fallocate(2)\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/fallocate.c:139
+#, fuzzy
+msgid "fallocate failed: keep size mode is unsupported"
+msgstr "保持大小模式 (-n 選項) 未受支援"
+
+#: sys-utils/fallocate.c:140 sys-utils/fallocate.c:149
+#, fuzzy
+msgid "fallocate failed"
+msgstr "%s：fallocate 失敗"
+
+#: sys-utils/fallocate.c:237
+#, fuzzy, c-format
+msgid "%s: read failed"
+msgstr "fread 失敗"
+
+#: sys-utils/fallocate.c:281
+#, c-format
+msgid "%s: %s (%ju bytes) converted to sparse holes.\n"
+msgstr ""
+
+#: sys-utils/fallocate.c:361
+msgid "posix_fallocate support is not compiled"
+msgstr ""
+
+#: sys-utils/fallocate.c:377 sys-utils/fsfreeze.c:106
+msgid "no filename specified"
+msgstr "未指定任何檔名"
+
+#: sys-utils/fallocate.c:389 sys-utils/fallocate.c:395
+msgid "invalid length value specified"
+msgstr "指定了無效的長度值"
+
+#: sys-utils/fallocate.c:393
+msgid "no length argument specified"
+msgstr "未指定任何長度引數"
+
+#: sys-utils/fallocate.c:398
+msgid "invalid offset value specified"
+msgstr "指定了無效的偏移值"
+
+#: sys-utils/fallocate.c:421
+#, fuzzy, c-format
+msgid "%s: %s (%ju bytes) hole created.\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#: sys-utils/fallocate.c:424
+#, fuzzy, c-format
+msgid "%s: %s (%ju bytes) removed.\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#: sys-utils/fallocate.c:427
+#, fuzzy, c-format
+msgid "%s: %s (%ju bytes) inserted.\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#: sys-utils/fallocate.c:430
+#, fuzzy, c-format
+msgid "%s: %s (%ju bytes) zeroed.\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#: sys-utils/fallocate.c:433
+#, fuzzy, c-format
+msgid "%s: %s (%ju bytes) allocated.\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#: sys-utils/flock.c:53
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] <file>|<directory> <command> [<argument>...]\n"
+" %1$s [options] <file>|<directory> -c <command>\n"
+" %1$s [options] <file descriptor number>\n"
+msgstr ""
+" %1$s [選項] <file descriptor number>\n"
+" %1$s [選項]<檔案>-c<命令>\n"
+" %1$s [選項}<目錄>-c<命令>\n"
+
+#: sys-utils/flock.c:59
+#, fuzzy
+msgid "Manage file locks from shell scripts.\n"
+msgstr "login：無記憶體可用於命令稿。\n"
+
+#: sys-utils/flock.c:62
+#, fuzzy
+msgid " -s, --shared get a shared lock\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/flock.c:63
+#, fuzzy
+msgid " -x, --exclusive get an exclusive lock (default)\n"
+msgstr " -x --exclusive 提取專用鎖定 (預設)\n"
+
+#: sys-utils/flock.c:64
+#, fuzzy
+msgid " -u, --unlock remove a lock\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: sys-utils/flock.c:65
+#, fuzzy
+msgid " -n, --nonblock fail rather than wait\n"
+msgstr " -n --nonblock 失敗而非等待\n"
+
+#: sys-utils/flock.c:66
+#, fuzzy
+msgid " -w, --timeout <secs> wait for a limited amount of time\n"
+msgstr " -w --timeout <secs> 等待限制的數目的時間\n"
+
+#: sys-utils/flock.c:67
+#, fuzzy
+msgid " -E, --conflict-exit-code <number> exit code after conflict or timeout\n"
+msgstr " -E --conflict-exit-code <number> 離開代碼之後衝突或逾時\n"
+
+#: sys-utils/flock.c:68
+#, fuzzy
+msgid " -o, --close close file descriptor before running command\n"
+msgstr " -o --close 關閉檔案描述符號之前執行中命令\n"
+
+#: sys-utils/flock.c:69
+#, fuzzy
+msgid " -c, --command <command> run a single command string through the shell\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: sys-utils/flock.c:70
+#, fuzzy
+msgid " -F, --no-fork execute command without forking\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: sys-utils/flock.c:71
+#, fuzzy
+msgid " --verbose increase verbosity\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: sys-utils/flock.c:108
+#, fuzzy, c-format
+msgid "cannot open lock file %s"
+msgstr "無法開啟鎖定檔案 %s"
+
+#: sys-utils/flock.c:210
+#, fuzzy
+msgid "invalid timeout value"
+msgstr "無效的逾時引數"
+
+#: sys-utils/flock.c:214
+#, fuzzy
+msgid "invalid exit code"
+msgstr "無效的離開代碼"
+
+#: sys-utils/flock.c:216
+msgid "exit code out of range (expected 0 to 255)"
+msgstr ""
+
+#: sys-utils/flock.c:233
+msgid "the --no-fork and --close options are incompatible"
+msgstr ""
+
+#: sys-utils/flock.c:241
+#, fuzzy, c-format
+msgid "%s requires exactly one command argument"
+msgstr "%s 需求精確的一個指令引數"
+
+#: sys-utils/flock.c:259
+#, fuzzy
+msgid "bad file descriptor"
+msgstr "旗標描述"
+
+#: sys-utils/flock.c:262
+#, fuzzy
+msgid "requires file descriptor, file or directory"
+msgstr "需求檔案描述符號，檔案或目錄"
+
+#: sys-utils/flock.c:286
+#, fuzzy
+msgid "failed to get lock"
+msgstr "設定路徑時失敗"
+
+#: sys-utils/flock.c:293
+msgid "timeout while waiting to get lock"
+msgstr ""
+
+#: sys-utils/flock.c:334
+#, fuzzy, c-format
+msgid "%s: getting lock took %<PRId64>.%06<PRId64> seconds\n"
+msgstr "%s %.6f 秒\n"
+
+#: sys-utils/flock.c:346
+#, fuzzy, c-format
+msgid "%s: executing %s\n"
+msgstr "發生錯誤於執行\t%s\n"
+
+#: sys-utils/fsfreeze.c:41
+#, fuzzy, c-format
+msgid " %s [options] <mountpoint>\n"
+msgstr " %s [選項] <mount point>\n"
+
+#: sys-utils/fsfreeze.c:44
+#, fuzzy
+msgid "Suspend access to a filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/fsfreeze.c:47
+#, fuzzy
+msgid " -f, --freeze freeze the filesystem\n"
+msgstr " t 變更檔案系統的類型"
+
+#: sys-utils/fsfreeze.c:48
+msgid " -u, --unfreeze unfreeze the filesystem\n"
+msgstr ""
+
+#: sys-utils/fsfreeze.c:104
+msgid "neither --freeze or --unfreeze specified"
+msgstr ""
+
+#: sys-utils/fsfreeze.c:124
+#, c-format
+msgid "%s: is not a directory"
+msgstr "%s：並非目錄"
+
+#: sys-utils/fsfreeze.c:131
+#, c-format
+msgid "%s: freeze failed"
+msgstr "%s：凍結時失敗"
+
+#: sys-utils/fsfreeze.c:137
+#, c-format
+msgid "%s: unfreeze failed"
+msgstr "%s：解除凍結時失敗"
+
+#: sys-utils/fstrim.c:83
+#, fuzzy, c-format
+msgid "%s: not a directory"
+msgstr "%s：不是目錄"
+
+#: sys-utils/fstrim.c:113
+#, fuzzy, c-format
+msgid "%s: 0 B (dry run) trimmed on %s\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/fstrim.c:115
+#, c-format
+msgid "%s: 0 B (dry run) trimmed\n"
+msgstr ""
+
+#: sys-utils/fstrim.c:133
+#, fuzzy, c-format
+msgid "%s: FITRIM ioctl failed"
+msgstr "%s：FITRIM ioctl 失敗"
+
+#. TRANSLATORS: The standard value here is a very large number.
+#: sys-utils/fstrim.c:143
+#, fuzzy, c-format
+msgid "%s: %s (%<PRIu64> bytes) trimmed on %s\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#. TRANSLATORS: The standard value here is a very large number.
+#: sys-utils/fstrim.c:147
+#, fuzzy, c-format
+msgid "%s: %s (%<PRIu64> bytes) trimmed\n"
+msgstr "%s：%<PRIu64> 位元組被已修整\n"
+
+#: sys-utils/fstrim.c:290 sys-utils/lsns.c:1494 sys-utils/swapon.c:746
+#: sys-utils/umount.c:271
+#, fuzzy, c-format
+msgid "failed to parse %s"
+msgstr "剖析 %s 時失敗"
+
+#: sys-utils/fstrim.c:316
+#, fuzzy
+msgid "failed to allocate FS handler"
+msgstr "配置迭代器時失敗"
+
+#: sys-utils/fstrim.c:403 sys-utils/fstrim.c:591
+#, fuzzy, c-format
+msgid "%s: the discard operation is not supported"
+msgstr "速度 %d 不受支援"
+
+#: sys-utils/fstrim.c:454
+#, fuzzy, c-format
+msgid " %s [options] <mount point>\n"
+msgstr " %s [選項] <mount point>\n"
+
+#: sys-utils/fstrim.c:457
+msgid "Discard unused blocks on a mounted filesystem.\n"
+msgstr ""
+
+#: sys-utils/fstrim.c:460
+#, fuzzy
+msgid " -a, --all trim mounted filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/fstrim.c:461
+#, fuzzy
+msgid " -A, --fstab trim filesystems from /etc/fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/fstrim.c:462
+#, fuzzy
+msgid " -I, --listed-in <list> trim filesystems listed in specified files\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: sys-utils/fstrim.c:463
+#, fuzzy
+msgid " -o, --offset <num> the offset in bytes to start discarding from\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/fstrim.c:464
+#, fuzzy
+msgid " -l, --length <num> the number of bytes to discard\n"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/fstrim.c:465
+msgid " -m, --minimum <num> the minimum extent length to discard\n"
+msgstr ""
+
+#: sys-utils/fstrim.c:466
+#, fuzzy
+msgid " -t, --types <list> limit the set of filesystem types\n"
+msgstr " l 列出已知檔案系統類型"
+
+#: sys-utils/fstrim.c:467
+#, fuzzy
+msgid " -v, --verbose print number of discarded bytes\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/fstrim.c:468
+#, fuzzy
+msgid " --quiet-unsupported suppress error messages if trim unsupported\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: sys-utils/fstrim.c:469
+#, fuzzy
+msgid " -n, --dry-run does everything, but trim\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/fstrim.c:550
+#, fuzzy
+msgid "failed to parse minimum extent length"
+msgstr "剖析最小延伸長度時失敗"
+
+#: sys-utils/fstrim.c:572
+#, fuzzy
+msgid "no mountpoint specified"
+msgstr "沒有 mountpoint 指定的。"
+
+#: sys-utils/hwclock.c:215
+#, c-format
+msgid "Assuming hardware clock is kept in %s time.\n"
+msgstr "假設硬體時鐘被保持在 %s 時間。\n"
+
+#: sys-utils/hwclock.c:216 sys-utils/hwclock.c:286
+msgid "UTC"
+msgstr "UTC"
+
+#: sys-utils/hwclock.c:216 sys-utils/hwclock.c:285
+msgid "local"
+msgstr "本地"
+
+#: sys-utils/hwclock.c:258 sys-utils/hwclock.c:261
+#, fuzzy, c-format
+msgid "Warning: unrecognized line in adjtime file: %s"
+msgstr ""
+"警告：無法辨識的第三列在中 adjtime 檔案\n"
+"(預期：『UTC』或『本地』或沒有任何東西.)"
+
+#: sys-utils/hwclock.c:273
+#, fuzzy
+msgid ""
+"Warning: unrecognized third line in adjtime file\n"
+"(Expected: `UTC' or `LOCAL' or nothing.)"
+msgstr ""
+"警告：無法辨識的第三列在中 adjtime 檔案\n"
+"(預期：『UTC』或『本地』或沒有任何東西.)"
+
+#: sys-utils/hwclock.c:279
+#, fuzzy, c-format
+#| msgid "Last drift adjustment done at %ld seconds after 1969\n"
+msgid "Last drift adjustment done at %<PRId64> seconds after 1969\n"
+msgstr "最後一次偏差調整已於 1969 年之後 %ld 秒完成\n"
+
+#: sys-utils/hwclock.c:281
+#, fuzzy, c-format
+#| msgid "Last calibration done at %ld seconds after 1969\n"
+msgid "Last calibration done at %<PRId64> seconds after 1969\n"
+msgstr "最後一次校測已於 1969 年之後 %ld 秒完成\n"
+
+#: sys-utils/hwclock.c:283
+#, c-format
+msgid "Hardware clock is on %s time\n"
+msgstr "硬體時鐘位於 %s 時間\n"
+
+#: sys-utils/hwclock.c:310
+#, c-format
+msgid "Waiting for clock tick...\n"
+msgstr "等候時鐘週期…\n"
+
+#: sys-utils/hwclock.c:316
+#, c-format
+msgid "...synchronization failed\n"
+msgstr "…同步化失敗\n"
+
+#: sys-utils/hwclock.c:318
+#, c-format
+msgid "...got clock tick\n"
+msgstr "…獲得時鐘週期\n"
+
+#: sys-utils/hwclock.c:359
+#, c-format
+msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
+msgstr "硬體時鐘的無效值：%4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
+
+#: sys-utils/hwclock.c:366
+#, fuzzy, c-format
+#| msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
+msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %<PRId64> seconds since 1969\n"
+msgstr "硬體時鐘時間：%4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
+
+#: sys-utils/hwclock.c:392
+#, c-format
+msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
+msgstr "從硬體時鐘讀取時間：%4d/%.2d/%.2d %02d:%02d:%02d\n"
+
+#: sys-utils/hwclock.c:419
+#, fuzzy, c-format
+#| msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
+msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %<PRId64> seconds since 1969\n"
+msgstr "設定硬體時鐘為 %.2d:%.2d:%.2d = %ld 秒自 1969 年起算\n"
+
+#: sys-utils/hwclock.c:455
+#, fuzzy, c-format
+msgid "RTC type: '%s'\n"
+msgstr "類型：%d\n"
+
+#: sys-utils/hwclock.c:555
+#, fuzzy, c-format
+msgid "Using delay: %.6f seconds\n"
+msgstr "%s %.6f 秒\n"
+
+#: sys-utils/hwclock.c:574
+#, c-format
+msgid "time jumped backward %.6f seconds to %<PRId64>.%06<PRId64> - retargeting\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:596
+#, c-format
+msgid "missed it - %<PRId64>.%06<PRId64> is too far past %<PRId64>.%06<PRId64> (%.6f > %.6f)\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:623
+#, c-format
+msgid ""
+"%<PRId64>.%06<PRId64> is close enough to %<PRId64>.%06<PRId64> (%.6f < %.6f)\n"
+"Set RTC to %<PRId64> (%<PRId64> + %d; refsystime = %<PRId64>.%06<PRId64>)\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:717
+#, fuzzy
+msgid "Calling settimeofday(NULL, 0) to lock the warp_clock function."
+msgstr "呼叫 settimeofday：\n"
+
+#: sys-utils/hwclock.c:720
+#, fuzzy, c-format
+msgid "Calling settimeofday(NULL, %d) to set the kernel timezone.\n"
+msgstr "呼叫 settimeofday：\n"
+
+#: sys-utils/hwclock.c:724
+#, c-format
+msgid "Calling settimeofday(NULL, %d) to warp System time, set PCIL and the kernel tz.\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:729
+#, fuzzy, c-format
+msgid "Calling settimeofday(%<PRId64>.%06<PRId64>, NULL) to set the System time.\n"
+msgstr "呼叫 settimeofday：\n"
+
+#: sys-utils/hwclock.c:751
+msgid "settimeofday() failed"
+msgstr "settimeofday() 失敗"
+
+#: sys-utils/hwclock.c:775
+#, fuzzy, c-format
+msgid "Not adjusting drift factor because the --update-drift option was not used.\n"
+msgstr "無法調整偏差係數，因為之前的硬體時鐘包含了無用資料。\n"
+
+#: sys-utils/hwclock.c:779
+#, c-format
+msgid ""
+"Not adjusting drift factor because last calibration time is zero,\n"
+"so history is bad and calibration startover is necessary.\n"
+msgstr ""
+"無法調整偏差係數，因為最後一次校測時間為零，\n"
+"因而不當的歷史記錄使得啟始校測為必要的。\n"
+
+#: sys-utils/hwclock.c:785
+#, fuzzy, c-format
+msgid "Not adjusting drift factor because it has been less than four hours since the last calibration.\n"
+msgstr "無法調整偏差係數，因為它從最後一次校測起已經慢過於一天。\n"
+
+#: sys-utils/hwclock.c:823
+#, c-format
+msgid ""
+"Clock drift factor was calculated as %f seconds/day.\n"
+"It is far too much. Resetting to zero.\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:830
+#, fuzzy, c-format
+msgid ""
+"Clock drifted %f seconds in the past %f seconds\n"
+"in spite of a drift factor of %f seconds/day.\n"
+"Adjusting drift factor by %f seconds/day\n"
+msgstr ""
+"時鐘偏差為 %.1f 秒發生於過去 %d 秒內，而不管 %f 秒/天的偏差係數。\n"
+"以 %f 秒/天來調整偏差係數\n"
+
+#: sys-utils/hwclock.c:874
+#, fuzzy, c-format
+msgid "Time since last adjustment is %<PRId64> second\n"
+msgid_plural "Time since last adjustment is %<PRId64> seconds\n"
+msgstr[0] "從最後一次調整後經過的時間為 %d 秒\n"
+
+#: sys-utils/hwclock.c:878
+#, fuzzy, c-format
+msgid "Calculated Hardware Clock drift is %<PRId64>.%06<PRId64> seconds\n"
+msgstr "%s %.6f 秒\n"
+
+#: sys-utils/hwclock.c:903
+#, c-format
+msgid ""
+"New %s data:\n"
+"%s"
+msgstr ""
+
+#: sys-utils/hwclock.c:920
+#, fuzzy, c-format
+msgid "cannot update %s"
+msgstr "無法開啟 %s"
+
+#: sys-utils/hwclock.c:956
+#, fuzzy, c-format
+msgid "Not setting clock because last adjustment time is zero, so history is bad.\n"
+msgstr "無法設定時鐘因為最後一次調整時間為零，因而歷史記錄是不當的。"
+
+#: sys-utils/hwclock.c:960
+#, fuzzy, c-format
+msgid "Not setting clock because drift factor %f is far too high.\n"
+msgstr "無法設定時鐘因為最後一次調整時間為零，因而歷史記錄是不當的。"
+
+#: sys-utils/hwclock.c:990
+#, c-format
+msgid "No usable clock interface found.\n"
+msgstr "找不到可用的時鐘介面。\n"
+
+#: sys-utils/hwclock.c:992
+#, fuzzy
+msgid "Cannot access the Hardware Clock via any known method."
+msgstr "無法存取硬體時鐘透過任何已知方法。"
+
+#: sys-utils/hwclock.c:996
+#, fuzzy
+msgid "Use the --verbose option to see the details of our search for an access method."
+msgstr "使用 --debug 選項到參看細節的我們的搜尋存取方法。"
+
+#: sys-utils/hwclock.c:1046
+#, fuzzy, c-format
+msgid "Target date: %<PRId64>\n"
+msgstr "已交換記憶體頁 %ld\n"
+
+#: sys-utils/hwclock.c:1047
+#, c-format
+msgid "Predicted RTC: %<PRId64>\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1077
+msgid "RTC read returned an invalid value."
+msgstr ""
+
+#: sys-utils/hwclock.c:1107
+#, c-format
+msgid "Needed adjustment is less than one second, so not setting clock.\n"
+msgstr "所需的調整少於一秒鐘，因而無法設定時鐘。\n"
+
+#: sys-utils/hwclock.c:1144
+#, fuzzy
+msgid "unable to read the RTC epoch."
+msgstr "無法讀取超區塊"
+
+#: sys-utils/hwclock.c:1146
+#, c-format
+msgid "The RTC epoch is set to %lu.\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1149
+msgid "--epoch is required for --setepoch."
+msgstr ""
+
+#: sys-utils/hwclock.c:1152
+#, fuzzy
+msgid "unable to set the RTC epoch."
+msgstr "無法設定系統時鐘。\n"
+
+#: sys-utils/hwclock.c:1165
+#, fuzzy, c-format
+msgid "unable to read the RTC parameter %s"
+msgstr "無法讀取超區塊"
+
+#: sys-utils/hwclock.c:1170
+#, c-format
+msgid "The RTC parameter 0x%jx is set to 0x%jx.\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1198
+#, fuzzy, c-format
+msgid " %s [function] [option...]\n"
+msgstr " hwclock [函式] [選項...]\n"
+
+#: sys-utils/hwclock.c:1201
+msgid "Time clocks utility."
+msgstr ""
+
+#: sys-utils/hwclock.c:1204
+#, fuzzy
+msgid " -r, --show display the RTC time"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: sys-utils/hwclock.c:1205
+#, fuzzy
+msgid " --get display drift corrected RTC time"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: sys-utils/hwclock.c:1206
+#, fuzzy
+msgid " --set set the RTC according to --date"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1207
+#, fuzzy
+msgid " -s, --hctosys set the system time from the RTC"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1208
+#, fuzzy
+msgid " -w, --systohc set the RTC from the system time"
+msgstr " l 列出已知檔案系統類型"
+
+#: sys-utils/hwclock.c:1209
+#, fuzzy
+msgid " --systz send timescale configurations to the kernel"
+msgstr " 「%s」)\n"
+
+#: sys-utils/hwclock.c:1210
+#, fuzzy
+msgid " -a, --adjust adjust the RTC to account for systematic drift"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/hwclock.c:1212
+#, fuzzy
+msgid " --getepoch display the RTC epoch"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/hwclock.c:1213
+#, fuzzy
+msgid " --setepoch set the RTC epoch according to --epoch"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1216
+#, fuzzy
+msgid " --param-get <param> display the RTC parameter"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/hwclock.c:1217
+msgid " --param-set <param>=<value> set the RTC parameter"
+msgstr ""
+
+#: sys-utils/hwclock.c:1219
+#, fuzzy
+msgid " --predict predict the drifted RTC time according to --date"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1221
+#, fuzzy
+msgid " -u, --utc the RTC timescale is UTC"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1222
+#, fuzzy
+msgid " -l, --localtime the RTC timescale is Local"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/hwclock.c:1225
+#, fuzzy, c-format
+msgid " -f, --rtc <file> use an alternate file to %1$s\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#: sys-utils/hwclock.c:1228
+#, fuzzy, c-format
+msgid " --directisa use the ISA bus instead of %1$s access\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/hwclock.c:1229
+#, fuzzy
+msgid " --date <time> date/time input for --set and --predict"
+msgstr " -V 輸出版本資訊然後離開\n"
+
+#: sys-utils/hwclock.c:1230
+#, fuzzy
+msgid " --delay <sec> delay used when set new RTC time"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: sys-utils/hwclock.c:1232
+msgid " --epoch <year> epoch input for --setepoch"
+msgstr ""
+
+#: sys-utils/hwclock.c:1234
+#, fuzzy
+msgid " --update-drift update the RTC drift factor"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/hwclock.c:1236
+#, fuzzy, c-format
+msgid " --noadjfile do not use %1$s\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/hwclock.c:1238
+#, fuzzy, c-format
+msgid " --adjfile <file> use an alternate file to %1$s\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#: sys-utils/hwclock.c:1239
+#, fuzzy
+msgid " --test dry run; implies --verbose"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/hwclock.c:1240
+#, fuzzy
+msgid " -v, --verbose display more details"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/hwclock.c:1247
+msgid " <param> is either a numeric RTC parameter value or one of these aliases:"
+msgstr ""
+
+#: sys-utils/hwclock.c:1250
+#, c-format
+msgid " - %1$s: %2$s (0x%3$x)\n"
+msgstr ""
+
+#: sys-utils/hwclock.c:1254
+msgid " See Kernel's include/uapi/linux/rtc.h for parameters and values."
+msgstr ""
+
+#: sys-utils/hwclock.c:1256
+msgid " <param> and <value> accept hexadecimal values if prefixed with 0x, otherwise decimal."
+msgstr ""
+
+#: sys-utils/hwclock.c:1357
+#, fuzzy
+msgid "Unable to connect to audit system"
+msgstr "無法連線到稽核系統"
+
+#: sys-utils/hwclock.c:1381
+msgid "use --verbose, --debug has been deprecated."
+msgstr ""
+
+#: sys-utils/hwclock.c:1494
+#, fuzzy, c-format
+msgid "%d too many arguments given"
+msgstr "太多引數"
+
+#: sys-utils/hwclock.c:1502
+msgid "--update-drift requires --set or --systohc"
+msgstr ""
+
+#: sys-utils/hwclock.c:1507
+#, fuzzy
+msgid "With --noadjfile, you must specify either --utc or --localtime"
+msgstr "與 --noadjfile，您必須指定還是 --utc 或 --localtime"
+
+#: sys-utils/hwclock.c:1514
+msgid "--date is required for --set or --predict"
+msgstr ""
+
+#: sys-utils/hwclock.c:1531
+#, fuzzy, c-format
+msgid "invalid date '%s'"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/hwclock.c:1554
+#, fuzzy, c-format
+msgid "System Time: %<PRId64>.%06<PRId64>\n"
+msgstr "目前的系統時間：%ld = %s\n"
+
+#: sys-utils/hwclock.c:1571
+#, fuzzy
+msgid "Test mode: nothing was changed."
+msgstr "大小的交換區域"
+
+#: sys-utils/hwclock-cmos.c:360
+msgid "ISA port access is not implemented"
+msgstr ""
+
+#: sys-utils/hwclock-cmos.c:362
+#, fuzzy
+msgid "iopl() port access failed"
+msgstr "無法存取檔案 %s"
+
+#: sys-utils/hwclock-cmos.c:373
+msgid "Using direct ISA access to the clock"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:48
+#, fuzzy
+#| msgid "unsupported filesystem features"
+msgid "supported features"
+msgstr "不受支援的檔案系統特徵"
+
+#: sys-utils/hwclock-rtc.c:49
+msgid "time correction"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:50
+msgid "backup switch mode"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:101
+#, fuzzy, c-format
+msgid "Trying to open: %s\n"
+msgstr "嘗試卸載 %s\n"
+
+#: sys-utils/hwclock-rtc.c:126 sys-utils/hwclock-rtc.c:216
+#, fuzzy
+msgid "cannot open rtc device"
+msgstr "無法開啟 "
+
+#: sys-utils/hwclock-rtc.c:140
+#, fuzzy, c-format
+msgid "ioctl(RTC_RD_NAME) to %s to read the time failed"
+msgstr "ioctl (%s) 到 %s 到讀取時間失敗"
+
+#: sys-utils/hwclock-rtc.c:177
+#, c-format
+msgid "Waiting in loop for time from %s to change\n"
+msgstr "循環等候自 %s 變更起的時間\n"
+
+#: sys-utils/hwclock-rtc.c:196
+#, fuzzy
+msgid "Timed out waiting for time change."
+msgstr "已逾時等待時間變更。"
+
+#: sys-utils/hwclock-rtc.c:244
+#, fuzzy, c-format
+msgid "select() to %s to wait for clock tick timed out"
+msgstr "選取() 到 %s 到等待時鐘週期已逾時"
+
+#: sys-utils/hwclock-rtc.c:247
+#, c-format
+msgid "select() to %s to wait for clock tick failed"
+msgstr "%s 的 select() 等候時鐘週期失敗"
+
+#: sys-utils/hwclock-rtc.c:252
+#, c-format
+msgid "ioctl() to %s to turn off update interrupts failed"
+msgstr "%s 的 ioctl() 關閉更新插斷失敗"
+
+#: sys-utils/hwclock-rtc.c:258
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_UIE_ON, 0) to %s failed"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:303
+#, fuzzy, c-format
+msgid "ioctl(RTC_SET_TIME) to %s to set the time failed"
+msgstr "ioctl (%s) 到 %s 到設定時間失敗。"
+
+#: sys-utils/hwclock-rtc.c:309
+#, fuzzy, c-format
+#| msgid "ioctl(%s) was successful.\n"
+msgid "ioctl(RTC_SET_TIME) was successful.\n"
+msgstr "ioctl(%s) 原本成功。\n"
+
+#: sys-utils/hwclock-rtc.c:325
+msgid "Using the rtc interface to the clock."
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:358
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_READ, epoch_p) to %s failed"
+msgstr "%s 的 ioctl(RTC_EPOCH_READ) 失敗"
+
+#: sys-utils/hwclock-rtc.c:364
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_READ, epoch_p) to %s succeeded.\n"
+msgstr "%s 的 ioctl(RTC_EPOCH_READ) 失敗"
+
+#: sys-utils/hwclock-rtc.c:383
+#, fuzzy, c-format
+msgid "invalid epoch '%s'."
+msgstr "無效的識別號：%s"
+
+#: sys-utils/hwclock-rtc.c:394
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_SET, %lu) to %s failed"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:400
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_EPOCH_SET, %lu) to %s succeeded.\n"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:442 sys-utils/hwclock-rtc.c:484
+msgid "could not convert parameter name to number"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:454
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_PARAM_GET, param) to %s failed"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:465
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_PARAM_GET, param) to %s succeeded.\n"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:491
+msgid "expected <param>=<value>"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:495
+msgid "could not convert parameter value to number"
+msgstr ""
+
+#: sys-utils/hwclock-rtc.c:507
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_PARAM_SET, param) to %s failed"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/hwclock-rtc.c:513
+#, fuzzy, c-format
+msgid "ioctl(%d, RTC_PARAM_SET, param) to %s succeeded.\n"
+msgstr "ioctl(RTC_EPOCH_SET) 到 %s 時失敗"
+
+#: sys-utils/ipcmk.c:70
+msgid "Create various IPC resources.\n"
+msgstr ""
+
+#: sys-utils/ipcmk.c:73
+#, fuzzy
+msgid " -M, --shmem <size> create shared memory segment of size <size>\n"
+msgstr " -M, --shmem <size> 建立共用記憶體資料段的大小<大小>\n"
+
+#: sys-utils/ipcmk.c:74
+#, fuzzy
+msgid " -S, --semaphore <number> create semaphore array with <number> elements\n"
+msgstr " -S, --semaphore <nsems> 建立號誌陣列與<nsems>元件\n"
+
+#: sys-utils/ipcmk.c:75
+#, fuzzy
+msgid " -Q, --queue create message queue\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/ipcmk.c:76
+#, fuzzy
+msgid " -p, --mode <mode> permission for the resource (default is 0644)\n"
+msgstr " -p, --mode <mode> 權限用於資源 (預設是 0644)\n"
+
+#: sys-utils/ipcmk.c:82 sys-utils/zramctl.c:565
+msgid "<size>"
+msgstr ""
+
+#: sys-utils/ipcmk.c:114 sys-utils/losetup.c:737 sys-utils/zramctl.c:653
+#, fuzzy
+msgid "failed to parse size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/ipcmk.c:121
+#, fuzzy
+msgid "failed to parse elements"
+msgstr "剖析元件時失敗"
+
+#: sys-utils/ipcmk.c:130
+#, fuzzy
+msgid "failed to parse mode"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/ipcmk.c:149
+msgid "create share memory failed"
+msgstr "建立共享記憶體時失敗"
+
+#: sys-utils/ipcmk.c:151
+#, c-format
+msgid "Shared memory id: %d\n"
+msgstr "共用記憶體識別號：%d\n"
+
+#: sys-utils/ipcmk.c:157
+msgid "create message queue failed"
+msgstr "建立訊息佇列時失敗"
+
+#: sys-utils/ipcmk.c:159
+#, c-format
+msgid "Message queue id: %d\n"
+msgstr "訊息佇列識別號：%d\n"
+
+#: sys-utils/ipcmk.c:165
+msgid "create semaphore failed"
+msgstr "建立號誌時失敗"
+
+#: sys-utils/ipcmk.c:167
+#, c-format
+msgid "Semaphore id: %d\n"
+msgstr "號誌識別號：%d\n"
+
+#: sys-utils/ipcrm.c:51
+#, fuzzy, c-format
+msgid ""
+" %1$s [options]\n"
+" %1$s shm|msg|sem <id>...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: sys-utils/ipcrm.c:55
+msgid "Remove certain IPC resources.\n"
+msgstr ""
+
+#: sys-utils/ipcrm.c:58
+#, fuzzy
+msgid " -m, --shmem-id <id> remove shared memory segment by id\n"
+msgstr " -m, --shmem-id <id> 移除共用記憶體資料段由 shmid\n"
+
+#: sys-utils/ipcrm.c:59
+#, fuzzy
+msgid " -M, --shmem-key <key> remove shared memory segment by key\n"
+msgstr " -M, --shmem-key <key> 移除共用記憶體資料段由鍵\n"
+
+#: sys-utils/ipcrm.c:60
+#, fuzzy
+msgid " -q, --queue-id <id> remove message queue by id\n"
+msgstr " -q, --queue-id <id> 移除訊息佇列由識別號\n"
+
+#: sys-utils/ipcrm.c:61
+#, fuzzy
+msgid " -Q, --queue-key <key> remove message queue by key\n"
+msgstr " -Q, --queue-key <key> 移除訊息佇列由鍵\n"
+
+#: sys-utils/ipcrm.c:62
+#, fuzzy
+msgid " -s, --semaphore-id <id> remove semaphore by id\n"
+msgstr " -s, --semaphore-id <id> 移除號誌由識別號\n"
+
+#: sys-utils/ipcrm.c:63
+#, fuzzy
+msgid " -S, --semaphore-key <key> remove semaphore by key\n"
+msgstr " -S, --semaphore-key <key> 移除號誌由鍵\n"
+
+#: sys-utils/ipcrm.c:64
+#, fuzzy
+msgid " -a, --all[=shm|msg|sem] remove all (in the specified category)\n"
+msgstr " -a, --all [=<shm|msg|sem>] 全部移除\n"
+
+#: sys-utils/ipcrm.c:65
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: sys-utils/ipcrm.c:86
+#, fuzzy, c-format
+msgid "removing shared memory segment id `%d'\n"
+msgstr "移除共用記憶體資料段識別號『%d』\n"
+
+#: sys-utils/ipcrm.c:91
+#, fuzzy, c-format
+msgid "removing message queue id `%d'\n"
+msgstr "移除訊息佇列識別號『%d』\n"
+
+#: sys-utils/ipcrm.c:96
+#, fuzzy, c-format
+msgid "removing semaphore id `%d'\n"
+msgstr "移除號誌識別號『%d』\n"
+
+#: sys-utils/ipcrm.c:108 sys-utils/ipcrm.c:223
+msgid "permission denied for key"
+msgstr "權限被拒用於鍵值"
+
+#: sys-utils/ipcrm.c:108
+msgid "permission denied for id"
+msgstr "權限被拒用於識別號"
+
+#: sys-utils/ipcrm.c:111 sys-utils/ipcrm.c:229
+msgid "invalid key"
+msgstr "無效的鍵值"
+
+#: sys-utils/ipcrm.c:111
+msgid "invalid id"
+msgstr "無效的識別號"
+
+#: sys-utils/ipcrm.c:114 sys-utils/ipcrm.c:226
+msgid "already removed key"
+msgstr "已經移除的鍵值"
+
+#: sys-utils/ipcrm.c:114
+msgid "already removed id"
+msgstr "已經移除的識別號"
+
+#: sys-utils/ipcrm.c:117 sys-utils/ipcrm.c:232
+#, fuzzy
+msgid "key failed"
+msgstr "鍵失敗"
+
+#: sys-utils/ipcrm.c:117
+#, fuzzy
+msgid "id failed"
+msgstr "識別號失敗"
+
+#: sys-utils/ipcrm.c:135
+#, fuzzy, c-format
+msgid "invalid id: %s"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/ipcrm.c:168
+#, c-format
+msgid "resource(s) deleted\n"
+msgstr "資源已刪除\n"
+
+#: sys-utils/ipcrm.c:201
+#, fuzzy, c-format
+msgid "illegal key (%s)"
+msgstr "不合法的鍵 (%s)"
+
+#: sys-utils/ipcrm.c:257
+#, fuzzy
+msgid "kernel not configured for shared memory"
+msgstr "內核無法已組配用於共用記憶體"
+
+#: sys-utils/ipcrm.c:270
+#, fuzzy
+msgid "kernel not configured for semaphores"
+msgstr "內核無法已組配用於號誌"
+
+#: sys-utils/ipcrm.c:291
+#, fuzzy
+msgid "kernel not configured for message queues"
+msgstr "內核無法已組配用於訊息佇列"
+
+#: sys-utils/ipcs.c:61
+#, fuzzy, c-format
+msgid ""
+" %1$s [resource-option...] [output-option]\n"
+" %1$s -m|-q|-s -i <id>\n"
+msgstr ""
+"用法：%1$s [資源]... [輸出格式]\n"
+" %1$s [資源] -i 識別號\n"
+"\n"
+
+#: sys-utils/ipcs.c:65 sys-utils/lsipc.c:295
+#, fuzzy
+msgid "Show information on IPC facilities.\n"
+msgstr ""
+"對於您有讀取權限的項目，提供 ipc 機能的資訊。\n"
+"\n"
+
+#: sys-utils/ipcs.c:68
+#, fuzzy
+msgid " -i, --id <id> print details on resource identified by <id>\n"
+msgstr " -i, --id <id> 列印細節於資源識別的由識別號\n"
+
+#: sys-utils/ipcs.c:72 sys-utils/lsipc.c:298
+#, fuzzy
+msgid "Resource options:\n"
+msgstr "資源選項：\n"
+
+#: sys-utils/ipcs.c:73 sys-utils/lsipc.c:299
+#, fuzzy
+msgid " -m, --shmems shared memory segments\n"
+msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#: sys-utils/ipcs.c:74 sys-utils/lsipc.c:300
+#, fuzzy
+msgid " -q, --queues message queues\n"
+msgstr " -q, --queues 訊息佇列\n"
+
+#: sys-utils/ipcs.c:75 sys-utils/lsipc.c:301
+#, fuzzy
+msgid " -s, --semaphores semaphores\n"
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/ipcs.c:76
+#, fuzzy
+msgid " -a, --all all (default)\n"
+msgstr " -a, --all 所有 (預設)\n"
+
+#: sys-utils/ipcs.c:79
+#, fuzzy
+msgid "Output options:\n"
+msgstr "輸出格式：\n"
+
+#: sys-utils/ipcs.c:80
+#, fuzzy
+msgid " -t, --time show attach, detach and change times\n"
+msgstr " -t, --time 顯示附加、卸離和變更次\n"
+
+#: sys-utils/ipcs.c:81
+#, fuzzy
+msgid " -p, --pid show PIDs of creator and last operator\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/ipcs.c:82
+#, fuzzy
+msgid " -c, --creator show creator and owner\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
+
+#: sys-utils/ipcs.c:83
+#, fuzzy
+msgid " -l, --limits show resource limits\n"
+msgstr " -l, --limits 顯示資源限度\n"
+
+#: sys-utils/ipcs.c:84
+#, fuzzy
+msgid " -u, --summary show status summary\n"
+msgstr " -u, --summary 顯示狀態概要\n"
+
+#: sys-utils/ipcs.c:85
+#, fuzzy
+msgid " --human show sizes in human-readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/ipcs.c:86
+#, fuzzy
+msgid " -b, --bytes show sizes in bytes\n"
+msgstr " -l, --limits 顯示資源限度\n"
+
+#: sys-utils/ipcs.c:124
+#, fuzzy
+msgid "failed to parse id argument"
+msgstr "剖析引數時失敗"
+
+#: sys-utils/ipcs.c:172
+msgid "when using an ID, a single resource must be specified"
+msgstr ""
+
+#: sys-utils/ipcs.c:212
+#, fuzzy, c-format
+msgid "unable to fetch shared memory limits\n"
+msgstr "最大共用記憶體 (千位元組) = %llu\n"
+
+#: sys-utils/ipcs.c:215
+#, c-format
+msgid "------ Shared Memory Limits --------\n"
+msgstr "------ 共用記憶體限度 --------\n"
+
+#: sys-utils/ipcs.c:216
+#, fuzzy, c-format
+msgid "max number of segments = %ju\n"
+msgstr "最大資料段數量 = %lu\n"
+
+#: sys-utils/ipcs.c:218
+#, fuzzy
+msgid "max seg size"
+msgstr "最大檔案大小"
+
+#: sys-utils/ipcs.c:225
+#, fuzzy
+msgid "max total shared memory (kbytes)"
+msgstr "最大共用記憶體 (千位元組) = %llu\n"
+
+#: sys-utils/ipcs.c:233
+#, fuzzy
+msgid "max total shared memory"
+msgstr "最大共用記憶體 (千位元組) = %llu\n"
+
+#: sys-utils/ipcs.c:236
+#, fuzzy
+msgid "min seg size"
+msgstr "最大常駐設定大小"
+
+#: sys-utils/ipcs.c:248
+#, c-format
+msgid "kernel not configured for shared memory\n"
+msgstr "內核未組配支援共用記憶體\n"
+
+#: sys-utils/ipcs.c:252
+#, c-format
+msgid "------ Shared Memory Status --------\n"
+msgstr "------ 共用記憶體狀態 --------\n"
+
+#. TRANSLATORS: This output format is maintained for backward
+#. compatibility as ipcs is used in scripts. For consistency
+#. with the rest, the translated form can follow this model:
+#. *
+#. "segments allocated = %d\n"
+#. "pages allocated = %ld\n"
+#. "pages resident = %ld\n"
+#. "pages swapped = %ld\n"
+#. "swap performance = %ld attempts, %ld successes\n"
+#.
+#: sys-utils/ipcs.c:264
+#, fuzzy, c-format
+msgid ""
+"segments allocated %d\n"
+"pages allocated %ld\n"
+"pages resident %ld\n"
+"pages swapped %ld\n"
+"Swap performance: %ld attempts\t %ld successes\n"
+msgstr ""
+"資料段配置 %d\n"
+"頁面配置 %ld\n"
+"頁面常駐 %ld\n"
+"頁面交換 %ld\n"
+"交換效能：%ld 試圖\t %ld 成功\n"
+
+#: sys-utils/ipcs.c:281
+#, c-format
+msgid "------ Shared Memory Segment Creators/Owners --------\n"
+msgstr "------ 共用記憶體資料段建立者/擁有者 --------\n"
+
+#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:289 sys-utils/ipcs.c:296
+#: sys-utils/ipcs.c:302
+msgid "shmid"
+msgstr "shmid"
+
+#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:302 sys-utils/ipcs.c:407
+#: sys-utils/ipcs.c:422 sys-utils/ipcs.c:509 sys-utils/ipcs.c:527
+msgid "perms"
+msgstr "perms"
+
+#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
+msgid "cuid"
+msgstr "cuid"
+
+#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
+msgid "cgid"
+msgstr "cgid"
+
+#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
+msgid "uid"
+msgstr "uid"
+
+#: sys-utils/ipcs.c:283 sys-utils/ipcs.c:407 sys-utils/ipcs.c:509
+msgid "gid"
+msgstr "gid"
+
+#: sys-utils/ipcs.c:287
+#, c-format
+msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
+msgstr "------ 共用記憶體附加/卸離/變更 次數 --------\n"
+
+#: sys-utils/ipcs.c:289 sys-utils/ipcs.c:296 sys-utils/ipcs.c:302
+#: sys-utils/ipcs.c:413 sys-utils/ipcs.c:422 sys-utils/ipcs.c:515
+#: sys-utils/ipcs.c:521 sys-utils/ipcs.c:527
+msgid "owner"
+msgstr "擁有者"
+
+#: sys-utils/ipcs.c:289
+msgid "attached"
+msgstr "已附加"
+
+#: sys-utils/ipcs.c:289
+msgid "detached"
+msgstr "已卸離"
+
+#: sys-utils/ipcs.c:290
+msgid "changed"
+msgstr "已變更"
+
+#: sys-utils/ipcs.c:294
+#, c-format
+msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
+msgstr "------ 共用記憶體建立者/最後操作 PIDs --------\n"
+
+#: sys-utils/ipcs.c:296
+msgid "cpid"
+msgstr "cpid"
+
+#: sys-utils/ipcs.c:296
+msgid "lpid"
+msgstr "lpid"
+
+#: sys-utils/ipcs.c:300
+#, c-format
+msgid "------ Shared Memory Segments --------\n"
+msgstr "------ 共用記憶體資料段 --------\n"
+
+#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:422 sys-utils/ipcs.c:527
+msgid "key"
+msgstr "鍵值"
+
+#: sys-utils/ipcs.c:303 sys-utils/prlimit.c:77 sys-utils/prlimit.c:78
+#: sys-utils/prlimit.c:80 sys-utils/prlimit.c:81 sys-utils/prlimit.c:83
+#: sys-utils/prlimit.c:84 sys-utils/prlimit.c:88 sys-utils/prlimit.c:92
+msgid "bytes"
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:304
+msgid "nattch"
+msgstr "使用數"
+
+#: sys-utils/ipcs.c:304
+msgid "status"
+msgstr "狀態"
+
+#: sys-utils/ipcs.c:328 sys-utils/ipcs.c:330 sys-utils/ipcs.c:332
+#: sys-utils/ipcs.c:445 sys-utils/ipcs.c:447 sys-utils/ipcs.c:552
+#: sys-utils/ipcs.c:554 sys-utils/ipcs.c:556 sys-utils/ipcs.c:609
+#: sys-utils/ipcs.c:611 sys-utils/ipcs.c:640 sys-utils/ipcs.c:642
+#: sys-utils/ipcs.c:644 sys-utils/ipcs.c:668
+msgid "Not set"
+msgstr "未設定"
+
+#: sys-utils/ipcs.c:358 sys-utils/lsipc.c:1012 sys-utils/lsipc.c:1018
+msgid "dest"
+msgstr "目標"
+
+#: sys-utils/ipcs.c:359 sys-utils/lsipc.c:1013 sys-utils/lsipc.c:1026
+msgid "locked"
+msgstr "已鎖定"
+
+#: sys-utils/ipcs.c:378
+#, fuzzy, c-format
+msgid "unable to fetch semaphore limits\n"
+msgstr "設定 %s 資源限制時失敗"
+
+#: sys-utils/ipcs.c:381
+#, c-format
+msgid "------ Semaphore Limits --------\n"
+msgstr "------ 號誌限度 --------\n"
+
+#: sys-utils/ipcs.c:382
+#, c-format
+msgid "max number of arrays = %d\n"
+msgstr "最大陣列數量 = %d\n"
+
+#: sys-utils/ipcs.c:383
+#, c-format
+msgid "max semaphores per array = %d\n"
+msgstr "各陣列最大號誌 = %d\n"
+
+#: sys-utils/ipcs.c:384
+#, c-format
+msgid "max semaphores system wide = %d\n"
+msgstr "系統整體最大號誌 = %d\n"
+
+#: sys-utils/ipcs.c:385
+#, c-format
+msgid "max ops per semop call = %d\n"
+msgstr "各 semop 呼叫最大 ops = %d\n"
+
+#: sys-utils/ipcs.c:386
+#, fuzzy, c-format
+msgid "semaphore max value = %u\n"
+msgstr "號誌最大值 = %d\n"
+
+#: sys-utils/ipcs.c:395
+#, c-format
+msgid "kernel not configured for semaphores\n"
+msgstr "內核未組配用於號誌\n"
+
+#: sys-utils/ipcs.c:398
+#, c-format
+msgid "------ Semaphore Status --------\n"
+msgstr "------ 號誌狀態 --------\n"
+
+#: sys-utils/ipcs.c:399
+#, c-format
+msgid "used arrays = %d\n"
+msgstr "已用陣列 = %d\n"
+
+#: sys-utils/ipcs.c:400
+#, c-format
+msgid "allocated semaphores = %d\n"
+msgstr "已配置號誌 = %d\n"
+
+#: sys-utils/ipcs.c:405
+#, c-format
+msgid "------ Semaphore Arrays Creators/Owners --------\n"
+msgstr "------ 號誌陣列建立者/擁有者 --------\n"
+
+#: sys-utils/ipcs.c:407 sys-utils/ipcs.c:413 sys-utils/ipcs.c:422
+msgid "semid"
+msgstr "semid"
+
+#: sys-utils/ipcs.c:411
+#, c-format
+msgid "------ Semaphore Operation/Change Times --------\n"
+msgstr "------ 號誌作業/變更 次數 --------\n"
+
+#: sys-utils/ipcs.c:413
+msgid "last-op"
+msgstr "最後操作者"
+
+#: sys-utils/ipcs.c:413
+msgid "last-changed"
+msgstr "最後變更者"
+
+#: sys-utils/ipcs.c:420
+#, c-format
+msgid "------ Semaphore Arrays --------\n"
+msgstr "------ 號誌陣列 --------\n"
+
+#: sys-utils/ipcs.c:422
+msgid "nsems"
+msgstr "nsems"
+
+#: sys-utils/ipcs.c:479
+#, fuzzy, c-format
+msgid "unable to fetch message limits\n"
+msgstr "磁頭數量"
+
+#: sys-utils/ipcs.c:482
+#, c-format
+msgid "------ Messages Limits --------\n"
+msgstr "------ 訊息限度 --------\n"
+
+#: sys-utils/ipcs.c:483
+#, c-format
+msgid "max queues system wide = %d\n"
+msgstr "系統整體最大佇列 = %d\n"
+
+#: sys-utils/ipcs.c:485
+#, fuzzy
+msgid "max size of message"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/ipcs.c:487
+#, fuzzy
+msgid "default max size of queue"
+msgstr "預設佇列最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/ipcs.c:494
+#, c-format
+msgid "kernel not configured for message queues\n"
+msgstr "內核未組配用於訊息佇列\n"
+
+#: sys-utils/ipcs.c:497
+#, c-format
+msgid "------ Messages Status --------\n"
+msgstr "------ 訊息狀態 --------\n"
+
+#: sys-utils/ipcs.c:499
+#, c-format
+msgid "allocated queues = %d\n"
+msgstr "已配置佇列 = %d\n"
+
+#: sys-utils/ipcs.c:500
+#, c-format
+msgid "used headers = %d\n"
+msgstr "已用標頭 = %d\n"
+
+#: sys-utils/ipcs.c:502
+#, fuzzy
+msgid "used space"
+msgstr "已用空間 = %d 位元組\n"
+
+#: sys-utils/ipcs.c:503
+#, fuzzy
+msgid " bytes\n"
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:507
+#, c-format
+msgid "------ Message Queues Creators/Owners --------\n"
+msgstr "------ 訊息佇列建立者/擁有者 --------\n"
+
+#: sys-utils/ipcs.c:509 sys-utils/ipcs.c:515 sys-utils/ipcs.c:521
+#: sys-utils/ipcs.c:527
+msgid "msqid"
+msgstr "msqid"
+
+#: sys-utils/ipcs.c:513
+#, c-format
+msgid "------ Message Queues Send/Recv/Change Times --------\n"
+msgstr "------ 訊息佇列發送/接收/變更 次數 --------\n"
+
+#: sys-utils/ipcs.c:515
+msgid "send"
+msgstr "發送"
+
+#: sys-utils/ipcs.c:515
+msgid "recv"
+msgstr "接收"
+
+#: sys-utils/ipcs.c:515
+msgid "change"
+msgstr "變更"
+
+#: sys-utils/ipcs.c:519
+#, c-format
+msgid "------ Message Queues PIDs --------\n"
+msgstr "------ 訊息佇列 PIDs --------\n"
+
+#: sys-utils/ipcs.c:521
+msgid "lspid"
+msgstr "lspid"
+
+#: sys-utils/ipcs.c:521
+msgid "lrpid"
+msgstr "lrpid"
+
+#: sys-utils/ipcs.c:525
+#, c-format
+msgid "------ Message Queues --------\n"
+msgstr "------ 訊息佇列 --------\n"
+
+#: sys-utils/ipcs.c:528
+msgid "used-bytes"
+msgstr "已用位元組"
+
+#: sys-utils/ipcs.c:529
+msgid "messages"
+msgstr "訊息"
+
+#: sys-utils/ipcs.c:593 sys-utils/ipcs.c:623 sys-utils/ipcs.c:656
+#: sys-utils/lsipc.c:559 sys-utils/lsipc.c:751 sys-utils/lsipc.c:914
+#, fuzzy, c-format
+msgid "id %d not found"
+msgstr "%s：找不到"
+
+#: sys-utils/ipcs.c:597
+#, c-format
+msgid ""
+"\n"
+"Shared memory Segment shmid=%d\n"
+msgstr ""
+"\n"
+"共用記憶體資料段 shmid = %d\n"
+
+#: sys-utils/ipcs.c:598
+#, fuzzy, c-format
+msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
+msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
+
+#: sys-utils/ipcs.c:601
+#, c-format
+msgid "mode=%#o\taccess_perms=%#o\n"
+msgstr "mode=%#o\taccess_perms=%#o\n"
+
+#: sys-utils/ipcs.c:603
+msgid "size="
+msgstr ""
+
+#: sys-utils/ipcs.c:603
+#, fuzzy
+msgid "bytes="
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:605
+#, fuzzy, c-format
+msgid "lpid=%u\tcpid=%u\tnattch=%jd\n"
+msgstr "位元組=%lu\tlpid=%d\tcpid=%d\tnattch=%ld\n"
+
+#: sys-utils/ipcs.c:608
+#, c-format
+msgid "att_time=%-26.24s\n"
+msgstr "att_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:610
+#, c-format
+msgid "det_time=%-26.24s\n"
+msgstr "det_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:612 sys-utils/ipcs.c:643
+#, c-format
+msgid "change_time=%-26.24s\n"
+msgstr "change_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:627
+#, c-format
+msgid ""
+"\n"
+"Message Queue msqid=%d\n"
+msgstr ""
+"\n"
+"訊息佇列 msqid=%d\n"
+
+#: sys-utils/ipcs.c:628
+#, fuzzy, c-format
+msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
+msgstr "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\t模式=%#o\n"
+
+#: sys-utils/ipcs.c:632
+msgid "csize="
+msgstr ""
+
+#: sys-utils/ipcs.c:632
+#, fuzzy
+msgid "cbytes="
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:634
+msgid "qsize="
+msgstr ""
+
+#: sys-utils/ipcs.c:634
+#, fuzzy
+msgid "qbytes="
+msgstr "位元組"
+
+#: sys-utils/ipcs.c:639
+#, c-format
+msgid "send_time=%-26.24s\n"
+msgstr "send_time =%-26.24s\n"
+
+#: sys-utils/ipcs.c:641
+#, c-format
+msgid "rcv_time=%-26.24s\n"
+msgstr "rcv_time=%-26.24s\n"
+
+#: sys-utils/ipcs.c:660
+#, c-format
+msgid ""
+"\n"
+"Semaphore Array semid=%d\n"
+msgstr ""
+"\n"
+"號誌陣列 semid=%d\n"
+
+#: sys-utils/ipcs.c:661
+#, fuzzy, c-format
+msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
+msgstr "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
+
+#: sys-utils/ipcs.c:664
+#, c-format
+msgid "mode=%#o, access_perms=%#o\n"
+msgstr "模式=%#o, access_perms=%#o\n"
+
+#: sys-utils/ipcs.c:666
+#, fuzzy, c-format
+msgid "nsems = %ju\n"
+msgstr "nsems = %ld\n"
+
+#: sys-utils/ipcs.c:667
+#, c-format
+msgid "otime = %-26.24s\n"
+msgstr "otime = %-26.24s\n"
+
+#: sys-utils/ipcs.c:669
+#, c-format
+msgid "ctime = %-26.24s\n"
+msgstr "ctime = %-26.24s\n"
+
+#: sys-utils/ipcs.c:672
+msgid "semnum"
+msgstr "semnum"
+
+#: sys-utils/ipcs.c:672
+msgid "value"
+msgstr "值"
+
+#: sys-utils/ipcs.c:672
+msgid "ncount"
+msgstr "ncount"
+
+#: sys-utils/ipcs.c:672
+msgid "zcount"
+msgstr "zcount"
+
+#: sys-utils/ipcs.c:672
+msgid "pid"
+msgstr "pid"
+
+#: sys-utils/ipcutils.c:234 sys-utils/ipcutils.c:238 sys-utils/ipcutils.c:242
+#: sys-utils/ipcutils.c:246
+#, fuzzy, c-format
+msgid "%s failed"
+msgstr "%s 失敗。\n"
+
+#: sys-utils/ipcutils.c:507
+#, fuzzy, c-format
+msgid "%s (bytes) = "
+msgstr "%zd 位元組 ["
+
+#: sys-utils/ipcutils.c:509
+#, fuzzy, c-format
+msgid "%s (kbytes) = "
+msgstr "%zd 位元組 ["
+
+#: sys-utils/irq-common.c:54
+#, fuzzy
+msgid "interrupts"
+msgstr ""
+"\n"
+"發生插斷 %10.10s %5.5s\n"
+
+#: sys-utils/irq-common.c:55
+#, fuzzy
+msgid "total count"
+msgstr "讀取計數"
+
+#: sys-utils/irq-common.c:56
+#, fuzzy
+msgid "delta count"
+msgstr "讀取計數"
+
+#: sys-utils/irq-common.c:57
+#, fuzzy
+msgid "name"
+msgstr "使用者名稱"
+
+#: sys-utils/irq-common.c:139 sys-utils/irq-common.c:460 sys-utils/lsmem.c:702
+#: sys-utils/lsns.c:1116
+msgid "failed to initialize output table"
+msgstr "初始化輸出表格時失敗"
+
+#: sys-utils/irq-common.c:173 sys-utils/lsns.c:1037
+msgid "failed to add line to output"
+msgstr "加入輸出列時失敗"
+
+#: sys-utils/irq-common.c:416
+#, fuzzy
+msgid "unsupported column name to sort output"
+msgstr "不受支援的命令"
+
+#: sys-utils/irq-common.c:468
+#, fuzzy
+msgid "cpu-interrupts"
+msgstr ""
+"\n"
+"發生插斷 %10.10s %5.5s\n"
+
+#: sys-utils/irq-common.c:504
+#, no-c-format
+msgid "%delta:"
+msgstr ""
+
+#: sys-utils/irqtop.c:139
+#, c-format
+msgid ""
+"irqtop | total: %ld delta: %ld | %s | %s\n"
+"\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:187
+#, fuzzy
+msgid "cannot not create timerfd"
+msgstr "無法設定群組識別號"
+
+#: sys-utils/irqtop.c:189
+#, fuzzy
+msgid "cannot set timerfd"
+msgstr "無法設定群組識別號"
+
+#: sys-utils/irqtop.c:194 sys-utils/irqtop.c:212 sys-utils/irqtop.c:217
+#, fuzzy
+msgid "epoll_ctl failed"
+msgstr "意見調查() 失敗"
+
+#: sys-utils/irqtop.c:197
+#, fuzzy
+msgid "sigfillset failed"
+msgstr "semctl 失敗"
+
+#: sys-utils/irqtop.c:199
+#, fuzzy
+msgid "sigprocmask failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/irqtop.c:207
+#, fuzzy
+msgid "cannot not create signalfd"
+msgstr "無法區塊信號"
+
+#: sys-utils/irqtop.c:265
+msgid "Interactive utility to display kernel interrupt information."
+msgstr ""
+
+#: sys-utils/irqtop.c:268
+msgid " -c, --cpu-stat <mode> show per-cpu stat (auto, enable, disable)\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:269
+msgid " -C, --cpu-list <list> specify cpus in list format\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:270
+msgid " -d, --delay <secs> delay updates\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:272 sys-utils/lsirq.c:67
+#, fuzzy
+msgid " -s, --sort <column> specify sort column\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/irqtop.c:273 sys-utils/lsirq.c:68
+#, fuzzy
+msgid " -S, --softirq show softirqs instead of interrupts\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/irqtop.c:277
+msgid ""
+"\n"
+"The following interactive key commands are valid:\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:278
+msgid " i sort by IRQ\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:279
+msgid " t sort by TOTAL\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:280
+msgid " d sort by DELTA\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:281
+msgid " n sort by NAME\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:282
+msgid " q Q quit program\n"
+msgstr ""
+
+#: sys-utils/irqtop.c:320
+#, fuzzy, c-format
+msgid "unsupported mode '%s'"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/irqtop.c:342
+#, fuzzy
+msgid "failed to parse delay argument"
+msgstr "剖析引數時失敗"
+
+#: sys-utils/irqtop.c:399
+msgid "terminal setting retrieval"
+msgstr ""
+
+#: sys-utils/ldattach.c:184
+#, fuzzy
+msgid "invalid iflag"
+msgstr "無效的 iflag"
+
+#: sys-utils/ldattach.c:200
+#, fuzzy, c-format
+msgid " %s [options] <ldisc> <device>\n"
+msgstr " %s [選項] <ldisc><裝置>\n"
+
+#: sys-utils/ldattach.c:203
+msgid "Attach a line discipline to a serial line.\n"
+msgstr ""
+
+#: sys-utils/ldattach.c:206
+#, fuzzy
+msgid " -d, --debug print verbose messages to stderr\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/ldattach.c:207
+#, fuzzy
+msgid " -s, --speed <value> set serial line speed\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/ldattach.c:208
+msgid " -c, --intro-command <string> intro sent before ldattach\n"
+msgstr ""
+
+#: sys-utils/ldattach.c:209
+msgid " -p, --pause <seconds> pause between intro and ldattach\n"
+msgstr ""
+
+#: sys-utils/ldattach.c:210
+#, fuzzy
+msgid " -7, --sevenbits set character size to 7 bits\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+
+#: sys-utils/ldattach.c:211
+#, fuzzy
+msgid " -8, --eightbits set character size to 8 bits\n"
+msgstr " -8, --eightbits 設定字元大小到 8 位元\n"
+
+#: sys-utils/ldattach.c:212
+#, fuzzy
+msgid " -n, --noparity set parity to none\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/ldattach.c:213
+#, fuzzy
+msgid " -e, --evenparity set parity to even\n"
+msgstr " -e, --evenparity 設定同位到甚至\n"
+
+#: sys-utils/ldattach.c:214
+#, fuzzy
+msgid " -o, --oddparity set parity to odd\n"
+msgstr " -o, --oddparity 設定同位到奇數\n"
+
+#: sys-utils/ldattach.c:215
+#, fuzzy
+msgid " -1, --onestopbit set stop bits to one\n"
+msgstr " -1, --onestopbit 設定停止位元到一個\n"
+
+#: sys-utils/ldattach.c:216
+#, fuzzy
+msgid " -2, --twostopbits set stop bits to two\n"
+msgstr " -2, --twostopbits 設定停止位元到兩\n"
+
+#: sys-utils/ldattach.c:217
+#, fuzzy
+msgid " -i, --iflag [-]<iflag> set input mode flag\n"
+msgstr " -i, --iflag [-]<iflag> 設定輸入模式旗標\n"
+
+#: sys-utils/ldattach.c:222
+msgid ""
+"\n"
+"Known <ldisc> names:\n"
+msgstr ""
+"\n"
+"已知 <ldisc> 名稱：\n"
+
+#: sys-utils/ldattach.c:226
+msgid ""
+"\n"
+"Known <iflag> names:\n"
+msgstr ""
+"\n"
+"已知 <iflag> 名稱：\n"
+
+#: sys-utils/ldattach.c:344
+#, fuzzy
+msgid "invalid speed argument"
+msgstr "無效的速度引數"
+
+#: sys-utils/ldattach.c:347
+#, fuzzy
+msgid "invalid pause argument"
+msgstr "無效的前端引數"
+
+#: sys-utils/ldattach.c:374
+#, fuzzy
+msgid "invalid line discipline argument"
+msgstr "無效的列規律引數"
+
+#: sys-utils/ldattach.c:394
+#, c-format
+msgid "%s is not a serial line"
+msgstr "%s 並非序列線路"
+
+#: sys-utils/ldattach.c:401
+#, c-format
+msgid "cannot get terminal attributes for %s"
+msgstr "無法取得終端機屬性用於 %s"
+
+#: sys-utils/ldattach.c:404
+#, c-format
+msgid "speed %d unsupported"
+msgstr "速度 %d 不受支援"
+
+#: sys-utils/ldattach.c:453
+#, c-format
+msgid "cannot set terminal attributes for %s"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: sys-utils/ldattach.c:463
+#, fuzzy, c-format
+msgid "cannot write intro command to %s"
+msgstr "無法寫入 %s"
+
+#: sys-utils/ldattach.c:473
+msgid "cannot set line discipline"
+msgstr "無法設定線路規律"
+
+#: sys-utils/ldattach.c:483
+msgid "cannot daemonize"
+msgstr "無法守護程式化"
+
+#: sys-utils/losetup.c:72
+msgid "autoclear flag set"
+msgstr ""
+
+#: sys-utils/losetup.c:73
+#, fuzzy
+msgid "device backing file"
+msgstr "裝置識別碼"
+
+#: sys-utils/losetup.c:74
+#, fuzzy
+msgid "backing file inode number"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/losetup.c:75
+#, fuzzy
+msgid "backing file major:minor device number"
+msgstr "主要的：次級裝置數字"
+
+#: sys-utils/losetup.c:76
+#, fuzzy
+msgid "loop device name"
+msgstr "裝置名稱"
+
+#: sys-utils/losetup.c:77
+msgid "offset from the beginning"
+msgstr ""
+
+#: sys-utils/losetup.c:78
+#, fuzzy
+msgid "partscan flag set"
+msgstr "分割旗標"
+
+#: sys-utils/losetup.c:80
+#, fuzzy
+msgid "size limit of the file in bytes"
+msgstr "提取對齊偏移在中位元組"
+
+#: sys-utils/losetup.c:81
+#, fuzzy
+msgid "loop device major:minor number"
+msgstr "主要的：次級裝置數字"
+
+#: sys-utils/losetup.c:82
+msgid "access backing file with direct-io"
+msgstr ""
+
+#: sys-utils/losetup.c:83
+#, fuzzy
+msgid "logical sector size in bytes"
+msgstr "邏輯區大小"
+
+#: sys-utils/losetup.c:140 sys-utils/losetup.c:151
+#, fuzzy, c-format
+msgid ", offset %ju"
+msgstr "，偏移 %ju"
+
+#: sys-utils/losetup.c:143 sys-utils/losetup.c:154
+#, fuzzy, c-format
+msgid ", sizelimit %ju"
+msgstr "，sizelimit %ju"
+
+#: sys-utils/losetup.c:162
+#, fuzzy, c-format
+msgid ", encryption %s (type %u)"
+msgstr "，加密 %s (型態 %u)"
+
+#: sys-utils/losetup.c:206
+#, fuzzy, c-format
+msgid "%s: detach failed"
+msgstr "%s：卸離失敗"
+
+#: sys-utils/losetup.c:401
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] [<loopdev>]\n"
+" %1$s [options] -f | <loopdev> <file>\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
+
+#: sys-utils/losetup.c:406
+msgid "Set up and control loop devices.\n"
+msgstr ""
+
+#: sys-utils/losetup.c:410
+#, fuzzy
+msgid " -a, --all list all used devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/losetup.c:411
+msgid " -d, --detach <loopdev>... detach one or more devices\n"
+msgstr ""
+
+#: sys-utils/losetup.c:412
+#, fuzzy
+msgid " -D, --detach-all detach all used devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/losetup.c:413
+#, fuzzy
+msgid " -f, --find find first unused device\n"
+msgstr " -h, --help 這個小用法指導\n"
+
+#: sys-utils/losetup.c:414
+msgid " -c, --set-capacity <loopdev> resize the device\n"
+msgstr ""
+
+#: sys-utils/losetup.c:415
+msgid " -j, --associated <file> list all devices associated with <file>\n"
+msgstr ""
+
+#: sys-utils/losetup.c:416
+#, fuzzy
+msgid " -L, --nooverlap avoid possible conflict between devices\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/losetup.c:420
+#, fuzzy
+msgid " -o, --offset <num> start at offset <num> into file\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/losetup.c:421
+#, fuzzy
+msgid " --sizelimit <num> device is limited to <num> bytes of the file\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/losetup.c:422
+#, fuzzy
+msgid " -b, --sector-size <num> set the logical sector size to <num>\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
+
+#: sys-utils/losetup.c:423
+#, fuzzy
+msgid " -P, --partscan create a partitioned loop device\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/losetup.c:424
+#, fuzzy
+msgid " -r, --read-only set up a read-only loop device\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/losetup.c:425
+msgid " --direct-io[=<on|off>] open backing file with O_DIRECT\n"
+msgstr ""
+
+#: sys-utils/losetup.c:426
+msgid " --show print device name after setup (with -f)\n"
+msgstr ""
+
+#: sys-utils/losetup.c:427
+#, fuzzy
+msgid " -v, --verbose verbose mode\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/losetup.c:431
+#, fuzzy
+msgid " -J, --json use JSON --list output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/losetup.c:432
+#, fuzzy
+msgid " -l, --list list info about all or specified (default)\n"
+msgstr " -T, --test 測試用於 getopt (1) 版本\n"
+
+#: sys-utils/losetup.c:433
+#, fuzzy
+msgid " -n, --noheadings don't print headings for --list output\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/losetup.c:434
+msgid " -O, --output <cols> specify columns to output for --list\n"
+msgstr ""
+
+#: sys-utils/losetup.c:435
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/losetup.c:436
+#, fuzzy
+msgid " --raw use raw --list output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/losetup.c:464
+#, fuzzy, c-format
+msgid "%s: Warning: file is smaller than 512 bytes; the loop device may be useless or invisible for system tools."
+msgstr "%s：警告：檔案小於 512 位元組，迴圈裝置也許是無用的或隱形的用於系統工具。"
+
+#: sys-utils/losetup.c:468
+#, fuzzy, c-format
+msgid "%s: Warning: file does not fit into a 512-byte sector; the end of the file will be ignored."
+msgstr "%s：警告：檔案不符合進入 512-byte 磁區結束的檔案將被忽略。"
+
+#: sys-utils/losetup.c:490 sys-utils/losetup.c:542
+#, fuzzy, c-format
+msgid "%s: overlapping loop device exists"
+msgstr "%s 不是 lp 裝置"
+
+#: sys-utils/losetup.c:501
+#, c-format
+msgid "%s: overlapping read-only loop device exists"
+msgstr ""
+
+#: sys-utils/losetup.c:508
+#, c-format
+msgid "%s: overlapping encrypted loop device exists"
+msgstr ""
+
+#: sys-utils/losetup.c:514
+#, fuzzy, c-format
+msgid "%s: failed to re-use loop device"
+msgstr "%s：無法設定迴圈裝置"
+
+#: sys-utils/losetup.c:520
+#, fuzzy
+msgid "failed to inspect loop devices"
+msgstr "%s：無法設定迴圈裝置"
+
+#: sys-utils/losetup.c:543
+#, fuzzy, c-format
+msgid "%s: failed to check for conflicting loop devices"
+msgstr "%s：無法設定迴圈裝置"
+
+#: sys-utils/losetup.c:555 sys-utils/losetup.c:881
+#, fuzzy
+msgid "cannot find an unused loop device"
+msgstr "找不到未使用的裝置"
+
+#: sys-utils/losetup.c:568
+#, fuzzy, c-format
+msgid "%s: failed to use backing file"
+msgstr "%s：無法使用上一步檔案"
+
+#: sys-utils/losetup.c:665
+#, fuzzy
+msgid "failed to parse logical block size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/losetup.c:671 sys-utils/losetup.c:681 sys-utils/losetup.c:809
+#: sys-utils/losetup.c:823 sys-utils/losetup.c:861
+#, fuzzy, c-format
+msgid "%s: failed to use device"
+msgstr "%s：無法使用裝置"
+
+#: sys-utils/losetup.c:820
+#, fuzzy
+msgid "no loop device specified"
+msgstr "沒有迴圈裝置指定的"
+
+#: sys-utils/losetup.c:835
+#, fuzzy, c-format
+msgid "the options %s are allowed during loop device setup only"
+msgstr "選項 %s 被允許到迴圈裝置設定只有"
+
+#: sys-utils/losetup.c:840
+#, fuzzy
+msgid "the option --offset is not allowed in this context"
+msgstr "選項 --offset 未被允許在中這個語境。"
+
+#: sys-utils/losetup.c:902
+#, fuzzy, c-format
+msgid "%s: set capacity failed"
+msgstr "%s：設定容量失敗"
+
+#: sys-utils/losetup.c:908
+#, fuzzy, c-format
+msgid "%s: set direct io failed"
+msgstr "%s：變更目錄失敗"
+
+#: sys-utils/losetup.c:914
+#, fuzzy, c-format
+msgid "%s: set logical block size failed"
+msgstr "%s：取得大小時失敗"
+
+#: sys-utils/lscpu.c:48
+msgid "none"
+msgstr "無"
+
+#: sys-utils/lscpu.c:49
+msgid "para"
+msgstr "部分"
+
+#: sys-utils/lscpu.c:50
+msgid "full"
+msgstr "全部"
+
+#: sys-utils/lscpu.c:51
+msgid "container"
+msgstr ""
+
+#: sys-utils/lscpu.c:75
+#, fuzzy
+msgid "horizontal"
+msgstr "水平"
+
+#: sys-utils/lscpu.c:76
+#, fuzzy
+msgid "vertical"
+msgstr "垂直"
+
+#: sys-utils/lscpu.c:144
+msgid "crude measurement of CPU speed"
+msgstr ""
+
+#: sys-utils/lscpu.c:145
+#, fuzzy
+msgid "logical CPU number"
+msgstr "邏輯的 CPU 數字"
+
+#: sys-utils/lscpu.c:146
+#, fuzzy
+msgid "logical core number"
+msgstr "邏輯的核心數字"
+
+#: sys-utils/lscpu.c:147
+#, fuzzy
+msgid "logical cluster number"
+msgstr "邏輯的核心數字"
+
+#: sys-utils/lscpu.c:148
+#, fuzzy
+msgid "logical socket number"
+msgstr "邏輯的通訊端數字"
+
+#: sys-utils/lscpu.c:149
+#, fuzzy
+msgid "logical NUMA node number"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/lscpu.c:150
+#, fuzzy
+msgid "logical book number"
+msgstr "邏輯的書籍數字"
+
+#: sys-utils/lscpu.c:151
+#, fuzzy
+msgid "logical drawer number"
+msgstr "邏輯的核心數字"
+
+#: sys-utils/lscpu.c:152
+#, fuzzy
+msgid "shows how caches are shared between CPUs"
+msgstr "顯示如何 caches 被共享介於 CPUs"
+
+#: sys-utils/lscpu.c:153
+#, fuzzy
+msgid "CPU dispatching mode on virtual hardware"
+msgstr "CPU 派送模式於虛擬硬體"
+
+#: sys-utils/lscpu.c:154
+#, fuzzy
+msgid "physical address of a CPU"
+msgstr "實體位址的 CPU"
+
+#: sys-utils/lscpu.c:155
+#, fuzzy
+msgid "shows if the hypervisor has allocated the CPU"
+msgstr "顯示如果 hypervisor 已配置 CPU"
+
+#: sys-utils/lscpu.c:156
+#, fuzzy
+msgid "shows if Linux currently makes use of the CPU"
+msgstr "顯示如果 Linux 目前利用 CPU"
+
+#: sys-utils/lscpu.c:157
+#, fuzzy
+msgid "shows the currently MHz of the CPU"
+msgstr "顯示如果 Linux 目前利用 CPU"
+
+#: sys-utils/lscpu.c:158
+msgid "shows scaling percentage of the CPU frequency"
+msgstr ""
+
+#: sys-utils/lscpu.c:159
+msgid "shows the maximum MHz of the CPU"
+msgstr ""
+
+#: sys-utils/lscpu.c:160
+msgid "shows the minimum MHz of the CPU"
+msgstr ""
+
+#: sys-utils/lscpu.c:161
+msgid "shows CPU model name"
+msgstr ""
+
+#: sys-utils/lscpu.c:166
+#, fuzzy
+msgid "size of all system caches"
+msgstr "設定檔案系統預先讀取"
+
+#: sys-utils/lscpu.c:167
+msgid "cache level"
+msgstr ""
+
+#: sys-utils/lscpu.c:168
+#, fuzzy
+msgid "cache name"
+msgstr "裝置名稱"
+
+#: sys-utils/lscpu.c:169
+#, fuzzy
+msgid "size of one cache"
+msgstr "大小的裝置"
+
+#: sys-utils/lscpu.c:170
+#, fuzzy
+msgid "cache type"
+msgstr "分割區編號"
+
+#: sys-utils/lscpu.c:171
+msgid "ways of associativity"
+msgstr ""
+
+#: sys-utils/lscpu.c:172
+msgid "allocation policy"
+msgstr ""
+
+#: sys-utils/lscpu.c:173
+#, fuzzy
+msgid "write policy"
+msgstr "寫入錯誤"
+
+#: sys-utils/lscpu.c:174
+#, fuzzy
+msgid "number of physical cache line per cache tag"
+msgstr "實體磁柱數量"
+
+#: sys-utils/lscpu.c:175
+msgid "number of sets in the cache; set lines has the same cache index"
+msgstr ""
+
+#: sys-utils/lscpu.c:176
+msgid "minimum amount of data in bytes transferred from memory to cache"
+msgstr ""
+
+#: sys-utils/lscpu.c:229
+#, fuzzy
+msgid "failed to initialize rootfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
+
+#: sys-utils/lscpu.c:236
+#, fuzzy
+msgid "failed to initialize CPUs sysfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
+
+#: sys-utils/lscpu.c:243
+#, fuzzy
+msgid "failed to initialize procfs handler"
+msgstr "%s：無法初始化 sysfs 處理常式"
+
+#: sys-utils/lscpu.c:336
+#, fuzzy
+msgid "Y"
+msgstr "Y"
+
+#: sys-utils/lscpu.c:336
+#, fuzzy
+msgid "N"
+msgstr "N"
+
+#: sys-utils/lscpu.c:677
+#, fuzzy, c-format
+msgid ""
+"# The following is the parsable format, which can be fed to other\n"
+"# programs. Each different item in every column has an unique ID\n"
+"# starting usually from zero.\n"
+msgstr ""
+"# 下列是 parsable 格式，該項可以被 fed 到其他\n"
+"# 程式。每個不同的項目在中每欄有唯一識別號\n"
+"# 開始從零。\n"
+
+#: sys-utils/lscpu.c:880
+#, fuzzy
+msgid "Model name:"
+msgstr "型號："
+
+#: sys-utils/lscpu.c:882
+#, fuzzy
+msgid "BIOS Model name:"
+msgstr "型號："
+
+#: sys-utils/lscpu.c:884
+#, fuzzy
+#| msgid "CPU family:"
+msgid "BIOS CPU family:"
+msgstr "CPU 家族："
+
+#: sys-utils/lscpu.c:886
+#, fuzzy
+msgid "Machine type:"
+msgstr "分割區編號"
+
+#: sys-utils/lscpu.c:888
+msgid "CPU family:"
+msgstr "CPU 家族："
+
+#: sys-utils/lscpu.c:890
+msgid "Model:"
+msgstr "型號："
+
+#: sys-utils/lscpu.c:892
+msgid "Thread(s) per core:"
+msgstr "每核心執行緒數："
+
+#: sys-utils/lscpu.c:894
+#, fuzzy
+msgid "Core(s) per cluster:"
+msgstr "每通訊端核心數："
+
+#: sys-utils/lscpu.c:896
+msgid "Core(s) per socket:"
+msgstr "每通訊端核心數："
+
+#: sys-utils/lscpu.c:899
+#, fuzzy
+msgid "Socket(s) per book:"
+msgstr "通訊端各書籍："
+
+#: sys-utils/lscpu.c:901
+msgid "Book(s) per drawer:"
+msgstr ""
+
+#: sys-utils/lscpu.c:902
+msgid "Drawer(s):"
+msgstr ""
+
+#: sys-utils/lscpu.c:904
+#, fuzzy
+msgid "Book(s):"
+msgstr "書籍："
+
+#: sys-utils/lscpu.c:908 sys-utils/lscpu.c:910 sys-utils/lscpu.c:915
+#, fuzzy
+msgid "Socket(s):"
+msgstr "通訊端："
+
+#: sys-utils/lscpu.c:912
+msgid "Cluster(s):"
+msgstr ""
+
+#: sys-utils/lscpu.c:920
+msgid "Stepping:"
+msgstr "製程："
+
+#: sys-utils/lscpu.c:922
+#, fuzzy
+msgid "Frequency boost:"
+msgstr "FreeBSD"
+
+#: sys-utils/lscpu.c:923
+#, fuzzy
+msgid "enabled"
+msgstr "CPU %d 已啟用\n"
+
+#: sys-utils/lscpu.c:923
+#, fuzzy
+msgid "disabled"
+msgstr "CPU %d 已停用\n"
+
+#: sys-utils/lscpu.c:927
+#, fuzzy
+msgid "CPU dynamic MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:929
+#, fuzzy
+msgid "CPU static MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:934
+#, fuzzy
+msgid "CPU(s) scaling MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:935
+#, fuzzy
+msgid "CPU max MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:936
+#, fuzzy
+msgid "CPU min MHz:"
+msgstr "CPU MHz："
+
+#: sys-utils/lscpu.c:939
+#, fuzzy
+msgid "BogoMIPS:"
+msgstr "BogoMIPS："
+
+#: sys-utils/lscpu.c:942
+#, fuzzy
+msgid "Dispatching mode:"
+msgstr "派送模式："
+
+#: sys-utils/lscpu.c:945
+#, fuzzy
+msgid "Physical sockets:"
+msgstr "實體磁柱數量"
+
+#: sys-utils/lscpu.c:946
+#, fuzzy
+msgid "Physical chips:"
+msgstr "實體磁柱數量"
+
+#: sys-utils/lscpu.c:947
+#, fuzzy
+msgid "Physical cores/chip:"
+msgstr "實體磁區大小"
+
+#: sys-utils/lscpu.c:951
+#, fuzzy
+msgid "Flags:"
+msgstr "屬性旗標"
+
+#: sys-utils/lscpu.c:995
+msgid "Architecture:"
+msgstr "架構："
+
+#: sys-utils/lscpu.c:1008
+msgid "CPU op-mode(s):"
+msgstr "CPU 作業模式："
+
+#: sys-utils/lscpu.c:1011
+msgid "Address sizes:"
+msgstr ""
+
+#: sys-utils/lscpu.c:1014 sys-utils/lscpu.c:1016
+#, fuzzy
+msgid "Byte Order:"
+msgstr "位元組次序："
+
+#: sys-utils/lscpu.c:1019
+#, fuzzy
+msgid "CPU(s):"
+msgstr "CPU (s)："
+
+#: sys-utils/lscpu.c:1023
+#, fuzzy
+msgid "On-line CPU(s) mask:"
+msgstr "線上 CPU (s) 遮罩："
+
+#: sys-utils/lscpu.c:1024
+#, fuzzy
+msgid "On-line CPU(s) list:"
+msgstr "線上 CPU (s) 清單："
+
+#: sys-utils/lscpu.c:1036
+msgid "failed to callocate cpu set"
+msgstr "callocate cpu 集合時失敗"
+
+#: sys-utils/lscpu.c:1045
+#, fuzzy
+msgid "Off-line CPU(s) mask:"
+msgstr "離線 CPU (s) 遮罩："
+
+#: sys-utils/lscpu.c:1046
+#, fuzzy
+msgid "Off-line CPU(s) list:"
+msgstr "離線 CPU (s) 清單："
+
+#: sys-utils/lscpu.c:1053
+msgid "Vendor ID:"
+msgstr "供應商識別號："
+
+#: sys-utils/lscpu.c:1055
+#, fuzzy
+msgid "BIOS Vendor ID:"
+msgstr "供應商識別號："
+
+#: sys-utils/lscpu.c:1063
+#, fuzzy
+msgid "Virtualization features:"
+msgstr "虛擬型態："
+
+#: sys-utils/lscpu.c:1065 sys-utils/lscpu.c:1067
+msgid "Virtualization:"
+msgstr "虛擬："
+
+#: sys-utils/lscpu.c:1070
+#, fuzzy
+msgid "Hypervisor:"
+msgstr "Hypervisor："
+
+#: sys-utils/lscpu.c:1072
+msgid "Hypervisor vendor:"
+msgstr "Hypervisor 供應商："
+
+#: sys-utils/lscpu.c:1073
+msgid "Virtualization type:"
+msgstr "虛擬型態："
+
+#: sys-utils/lscpu.c:1096
+msgid "Caches (sum of all):"
+msgstr ""
+
+#: sys-utils/lscpu.c:1100 sys-utils/lscpu.c:1130 sys-utils/lscpu.c:1162
+#, fuzzy, c-format
+msgid "%s:"
+msgstr "%s"
+
+#: sys-utils/lscpu.c:1100 sys-utils/lscpu.c:1130
+#, fuzzy, c-format
+msgid "%s cache:"
+msgstr "%s 快取："
+
+#: sys-utils/lscpu.c:1103
+#, c-format
+msgid "%<PRIu64> (%d instance)"
+msgid_plural "%<PRIu64> (%d instances)"
+msgstr[0] ""
+
+#: sys-utils/lscpu.c:1112
+#, c-format
+msgid "%s (%d instance)"
+msgid_plural "%s (%d instances)"
+msgstr[0] ""
+
+#: sys-utils/lscpu.c:1127
+#, fuzzy
+msgid "Caches:"
+msgstr "%s 快取："
+
+#: sys-utils/lscpu.c:1146
+msgid "NUMA:"
+msgstr ""
+
+#: sys-utils/lscpu.c:1148
+msgid "NUMA node(s):"
+msgstr "NUMA 節點："
+
+#: sys-utils/lscpu.c:1150
+#, c-format
+msgid "NUMA node%d CPU(s):"
+msgstr "NUMA node%d CPU(s)："
+
+#: sys-utils/lscpu.c:1158
+msgid "Vulnerabilities:"
+msgstr ""
+
+#: sys-utils/lscpu.c:1162
+#, fuzzy, c-format
+msgid "Vulnerability %s:"
+msgstr "不明機能『%s』"
+
+#: sys-utils/lscpu.c:1180
+msgid "Display information about the CPU architecture.\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:1183
+#, fuzzy
+msgid " -a, --all print both online and offline CPUs (default for -e)\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/lscpu.c:1184
+#, fuzzy
+msgid " -b, --online print online CPUs only (default for -p)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/lscpu.c:1185
+#, fuzzy
+msgid " -B, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: sys-utils/lscpu.c:1186
+msgid " -C, --caches[=<list>] info about caches in extended readable format\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:1187
+#, fuzzy
+msgid " -c, --offline print offline CPUs only\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/lscpu.c:1188
+#, fuzzy
+msgid " -J, --json use JSON for default or extended format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/lscpu.c:1189
+msgid " -e, --extended[=<list>] print out an extended readable format\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:1190
+msgid " -p, --parse[=<list>] print out a parsable format\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:1191
+msgid " -s, --sysroot <dir> use specified directory as system root\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:1192
+#, fuzzy
+msgid " -x, --hex print hexadecimal masks rather than lists of CPUs\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/lscpu.c:1193
+#, fuzzy
+msgid " -y, --physical print physical instead of logical IDs\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/lscpu.c:1194
+msgid " --hierarchic[=when] use subsections in summary (auto, never, always)\n"
+msgstr ""
+
+#: sys-utils/lscpu.c:1195
+#, fuzzy
+msgid " --output-all print all available columns for -e, -p or -C\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/lscpu.c:1199
+#, fuzzy
+msgid ""
+"\n"
+"Available output columns for -e or -p:\n"
+msgstr ""
+"\n"
+"可用欄位：\n"
+
+#: sys-utils/lscpu.c:1203
+#, fuzzy
+msgid ""
+"\n"
+"Available output columns for -C:\n"
+msgstr ""
+"\n"
+"可用欄位：\n"
+
+#: sys-utils/lscpu.c:1319
+#, fuzzy
+msgid "unsupported --flat argument"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/lscpu.c:1343
+#, fuzzy, c-format
+msgid "%s: options --all, --online and --offline may only be used with options --extended or --parse.\n"
+msgstr "%s：選項 --all，--online 和 --offline 也許會只有被使用與選項 --extended 或 --parsable。\n"
+
+#: sys-utils/lscpu-cputype.c:604
+msgid "error: uname failed"
+msgstr "錯誤：uname 失敗"
+
+#: sys-utils/lscpu-cputype.c:711
+#, fuzzy, c-format
+msgid "failed to determine number of CPUs: %s"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/lscpu-cputype.c:914
+#, fuzzy
+msgid "Failed to extract the node number"
+msgstr "%s：無法提取分割區編號"
+
+#: sys-utils/lscpu-virt.c:494
+#, fuzzy
+msgid "cannot restore signal handler"
+msgstr "無法設定信號處理程式"
+
+#: sys-utils/lsipc.c:150
+#, fuzzy
+msgid "Resource key"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:150
+#, fuzzy
+msgid "Key"
+msgstr "鍵值"
+
+#: sys-utils/lsipc.c:151
+#, fuzzy
+msgid "Resource ID"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:151
+msgid "ID"
+msgstr ""
+
+#: sys-utils/lsipc.c:152
+msgid "Owner's username or UID"
+msgstr ""
+
+#: sys-utils/lsipc.c:152
+#, fuzzy
+msgid "Owner"
+msgstr "擁有者"
+
+#: sys-utils/lsipc.c:153
+#, fuzzy
+msgid "Permissions"
+msgstr "權限被拒"
+
+#: sys-utils/lsipc.c:154
+msgid "Creator UID"
+msgstr ""
+
+#: sys-utils/lsipc.c:155
+msgid "Creator user"
+msgstr ""
+
+#: sys-utils/lsipc.c:156
+msgid "Creator GID"
+msgstr ""
+
+#: sys-utils/lsipc.c:157
+#, fuzzy
+msgid "Creator group"
+msgstr "主要的"
+
+#: sys-utils/lsipc.c:158
+#, fuzzy
+msgid "User ID"
+msgstr "使用者識別號"
+
+#: sys-utils/lsipc.c:158
+msgid "UID"
+msgstr ""
+
+#: sys-utils/lsipc.c:159
+#, fuzzy
+msgid "User name"
+msgstr "使用者名稱"
+
+#: sys-utils/lsipc.c:160
+msgid "Group ID"
+msgstr ""
+
+#: sys-utils/lsipc.c:160
+#, fuzzy
+msgid "GID"
+msgstr "SGI raw"
+
+#: sys-utils/lsipc.c:161
+#, fuzzy
+msgid "Group name"
+msgstr "群組名稱"
+
+#: sys-utils/lsipc.c:162
+#, fuzzy
+msgid "Time of the last change"
+msgstr "大小的交換區域"
+
+#: sys-utils/lsipc.c:162
+#, fuzzy
+msgid "Last change"
+msgstr "最後變更者"
+
+#: sys-utils/lsipc.c:165
+#, fuzzy
+msgid "Bytes used"
+msgstr "位元組在中使用"
+
+#: sys-utils/lsipc.c:166
+#, fuzzy
+msgid "Number of messages"
+msgstr "磁頭數量"
+
+#: sys-utils/lsipc.c:166
+#, fuzzy
+msgid "Messages"
+msgstr "訊息"
+
+#: sys-utils/lsipc.c:167
+#, fuzzy
+msgid "Time of last msg sent"
+msgstr "略過第一列"
+
+#: sys-utils/lsipc.c:167
+msgid "Msg sent"
+msgstr ""
+
+#: sys-utils/lsipc.c:168
+msgid "Time of last msg received"
+msgstr ""
+
+#: sys-utils/lsipc.c:168
+msgid "Msg received"
+msgstr ""
+
+#: sys-utils/lsipc.c:169
+msgid "PID of the last msg sender"
+msgstr ""
+
+#: sys-utils/lsipc.c:169
+msgid "Msg sender"
+msgstr ""
+
+#: sys-utils/lsipc.c:170
+msgid "PID of the last msg receiver"
+msgstr ""
+
+#: sys-utils/lsipc.c:170
+msgid "Msg receiver"
+msgstr ""
+
+#: sys-utils/lsipc.c:173
+#, fuzzy
+msgid "Segment size"
+msgstr "取得區塊大小"
+
+#: sys-utils/lsipc.c:174
+#, fuzzy
+msgid "Number of attached processes"
+msgstr "最大行程數量"
+
+#: sys-utils/lsipc.c:174
+msgid "Attached processes"
+msgstr ""
+
+#: sys-utils/lsipc.c:175
+#, fuzzy
+msgid "Status"
+msgstr "狀態"
+
+#: sys-utils/lsipc.c:176
+#, fuzzy
+msgid "Attach time"
+msgstr "已附加"
+
+#: sys-utils/lsipc.c:177
+#, fuzzy
+msgid "Detach time"
+msgstr "已卸離"
+
+#: sys-utils/lsipc.c:178
+#, fuzzy
+msgid "Creator command line"
+msgstr "所有掛載選項"
+
+#: sys-utils/lsipc.c:178
+#, fuzzy
+msgid "Creator command"
+msgstr "無效的命令"
+
+#: sys-utils/lsipc.c:179
+msgid "PID of the creator"
+msgstr ""
+
+#: sys-utils/lsipc.c:179
+msgid "Creator PID"
+msgstr ""
+
+#: sys-utils/lsipc.c:180
+msgid "PID of last user"
+msgstr ""
+
+#: sys-utils/lsipc.c:180
+#, fuzzy
+msgid "Last user PID"
+msgstr "使用者識別號"
+
+#: sys-utils/lsipc.c:183
+#, fuzzy
+msgid "Number of semaphores"
+msgstr "磁區數量"
+
+#: sys-utils/lsipc.c:183
+#, fuzzy
+msgid "Semaphores"
+msgstr "號誌識別號：%d\n"
+
+#: sys-utils/lsipc.c:184
+msgid "Time of the last operation"
+msgstr ""
+
+#: sys-utils/lsipc.c:184
+#, fuzzy
+msgid "Last operation"
+msgstr "操作 %d\n"
+
+#: sys-utils/lsipc.c:187
+#, fuzzy
+msgid "Resource name"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:187
+#, fuzzy
+msgid "Resource"
+msgstr "資源名稱"
+
+#: sys-utils/lsipc.c:188
+#, fuzzy
+msgid "Resource description"
+msgstr "資源描述"
+
+#: sys-utils/lsipc.c:188
+#, fuzzy
+msgid "Description"
+msgstr "旗標描述"
+
+#: sys-utils/lsipc.c:189
+msgid "Currently used"
+msgstr ""
+
+#: sys-utils/lsipc.c:189
+msgid "Used"
+msgstr ""
+
+#: sys-utils/lsipc.c:190
+#, fuzzy
+msgid "Currently use percentage"
+msgstr "檔案系統使用百分比"
+
+#: sys-utils/lsipc.c:190
+#, fuzzy
+msgid "Use"
+msgstr "用法："
+
+#: sys-utils/lsipc.c:191
+msgid "System-wide limit"
+msgstr ""
+
+#: sys-utils/lsipc.c:191
+msgid "Limit"
+msgstr ""
+
+#: sys-utils/lsipc.c:226
+#, c-format
+msgid "column %s does not apply to the specified IPC"
+msgstr ""
+
+#: sys-utils/lsipc.c:302
+msgid " -g, --global info about system-wide usage (may be used with -m, -q and -s)\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:303
+#, fuzzy
+msgid " -i, --id <id> print details on resource identified by <id>\n"
+msgstr " -i, --id <id> 列印細節於資源識別的由識別號\n"
+
+#: sys-utils/lsipc.c:309
+#, fuzzy
+msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/lsipc.c:310
+#, fuzzy
+msgid " -c, --creator show creator and owner\n"
+msgstr " -c, --creator 顯示建立者和擁有者\n"
+
+#: sys-utils/lsipc.c:312
+#, fuzzy
+msgid " -J, --json use the JSON output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/lsipc.c:314
+#, fuzzy
+msgid " -l, --list force list output format (for example with --id)\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
+
+#: sys-utils/lsipc.c:316
+msgid " -P, --numeric-perms print numeric permissions (PERMS column)\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:318
+#, fuzzy
+msgid " -t, --time show attach, detach and change times\n"
+msgstr " -t, --time 顯示附加、卸離和變更次\n"
+
+#: sys-utils/lsipc.c:325
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Generic columns:\n"
+msgstr ""
+"\n"
+"一般選項：\n"
+
+#: sys-utils/lsipc.c:329
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Shared-memory columns (--shmems):\n"
+msgstr ""
+"\n"
+"共用記憶體資料段 shmid = %d\n"
+
+#: sys-utils/lsipc.c:333
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Message-queue columns (--queues):\n"
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/lsipc.c:337
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Semaphore columns (--semaphores):\n"
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/lsipc.c:341
+#, c-format
+msgid ""
+"\n"
+"Summary columns (--global):\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:429
+#, c-format
+msgid ""
+"Elements:\n"
+"\n"
+msgstr ""
+
+#: sys-utils/lsipc.c:709 sys-utils/lsipc.c:873 sys-utils/lsipc.c:1072
+#, fuzzy
+msgid "failed to set data"
+msgstr "設定路徑時失敗"
+
+#: sys-utils/lsipc.c:734
+#, fuzzy
+msgid "Number of semaphore identifiers"
+msgstr "磁區數量"
+
+#: sys-utils/lsipc.c:735
+#, fuzzy
+msgid "Total number of semaphores"
+msgstr "磁區數量"
+
+#: sys-utils/lsipc.c:736
+#, fuzzy
+msgid "Max semaphores per semaphore set."
+msgstr " -s, --semaphores 號誌\n"
+
+#: sys-utils/lsipc.c:737
+#, fuzzy
+msgid "Max number of operations per semop(2)"
+msgstr "最大開啟檔案數量"
+
+#: sys-utils/lsipc.c:738
+#, fuzzy
+msgid "Semaphore max value"
+msgstr "號誌最大值 = %d\n"
+
+#: sys-utils/lsipc.c:898
+#, fuzzy
+msgid "Number of message queues"
+msgstr "磁頭數量"
+
+#: sys-utils/lsipc.c:899
+#, fuzzy
+msgid "Max size of message (bytes)"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:900
+#, fuzzy
+msgid "Default max size of queue (bytes)"
+msgstr "預設佇列最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:1014 sys-utils/lsipc.c:1033
+msgid "hugetlb"
+msgstr ""
+
+#: sys-utils/lsipc.c:1015 sys-utils/lsipc.c:1040
+#, fuzzy
+msgid "noreserve"
+msgstr "SunOS 保留區"
+
+#: sys-utils/lsipc.c:1097
+#, fuzzy
+msgid "Shared memory segments"
+msgstr ""
+"\n"
+"共用記憶體資料段 shmid = %d\n"
+
+#: sys-utils/lsipc.c:1098
+#, fuzzy
+msgid "Shared memory pages"
+msgstr "共用記憶體識別號：%d\n"
+
+#: sys-utils/lsipc.c:1099
+#, fuzzy
+msgid "Max size of shared memory segment (bytes)"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:1100
+#, fuzzy
+msgid "Min size of shared memory segment (bytes)"
+msgstr "訊息最大尺寸 (位元組)=%d\n"
+
+#: sys-utils/lsipc.c:1171
+#, fuzzy
+msgid "failed to parse IPC identifier"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/lsipc.c:1268
+#, fuzzy
+msgid "--global is mutually exclusive with --creator, --id and --time"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/lsirq.c:60
+msgid "Utility to display kernel interrupt information."
+msgstr ""
+
+#: sys-utils/lsmem.c:126
+msgid "start and end address of the memory range"
+msgstr ""
+
+#: sys-utils/lsmem.c:127
+#, fuzzy
+msgid "size of the memory range"
+msgstr "大小的裝置"
+
+#: sys-utils/lsmem.c:128
+msgid "online status of the memory range"
+msgstr ""
+
+#: sys-utils/lsmem.c:129
+#, fuzzy
+msgid "memory is removable"
+msgstr " 可移除的"
+
+#: sys-utils/lsmem.c:130
+msgid "memory block number or blocks range"
+msgstr ""
+
+#: sys-utils/lsmem.c:131
+#, fuzzy
+msgid "numa node of memory"
+msgstr "記憶體不足"
+
+#: sys-utils/lsmem.c:132
+#, fuzzy
+msgid "valid zones for the memory range"
+msgstr "大小的裝置"
+
+#: sys-utils/lsmem.c:259
+#, fuzzy
+msgid "online"
+msgstr "，上線"
+
+#: sys-utils/lsmem.c:260
+#, fuzzy
+msgid "offline"
+msgstr "，上線"
+
+#: sys-utils/lsmem.c:261
+msgid "on->off"
+msgstr ""
+
+#: sys-utils/lsmem.c:315 sys-utils/lsmem.c:322
+#, fuzzy
+msgid "Memory block size:"
+msgstr "取得區塊大小"
+
+#: sys-utils/lsmem.c:316 sys-utils/lsmem.c:326
+#, fuzzy
+msgid "Total online memory:"
+msgstr "記憶體不足"
+
+#: sys-utils/lsmem.c:317 sys-utils/lsmem.c:330
+#, fuzzy
+msgid "Total offline memory:"
+msgstr "記憶體不足"
+
+#: sys-utils/lsmem.c:343
+#, fuzzy, c-format
+msgid "Failed to open %s"
+msgstr "無法開啟 %s"
+
+#: sys-utils/lsmem.c:462 sys-utils/lsmem.c:467
+#, fuzzy
+msgid "failed to read memory block size"
+msgstr "剖析大小時失敗"
+
+#: sys-utils/lsmem.c:497
+#, fuzzy
+msgid "This system does not support memory blocks"
+msgstr "這個系統不支援重新掃描的 CPUs"
+
+#: sys-utils/lsmem.c:522
+msgid "List the ranges of available memory with their online status.\n"
+msgstr ""
+
+#: sys-utils/lsmem.c:527
+#, fuzzy
+msgid " -a, --all list each individual memory block\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/lsmem.c:533
+#, fuzzy
+msgid " -S, --split <list> split ranges by specified columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/lsmem.c:534
+#, fuzzy
+msgid " -s, --sysroot <dir> use the specified directory as system root\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/lsmem.c:535
+msgid " --summary[=when] print summary information (never,always or only)\n"
+msgstr ""
+
+#: sys-utils/lsmem.c:661
+#, fuzzy
+msgid "options --{raw,json,pairs} and --summary=only are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/lsmem.c:669
+#, fuzzy
+msgid "invalid argument to --sysroot"
+msgstr "無效的引數：%s"
+
+#: sys-utils/lsmem.c:717
+#, fuzzy
+msgid "Failed to initialize output column"
+msgstr "初始化輸出欄時失敗"
+
+#: sys-utils/lsns.c:117
+#, fuzzy
+msgid "namespace identifier (inode number)"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/lsns.c:118
+msgid "kind of namespace"
+msgstr ""
+
+#: sys-utils/lsns.c:119
+#, fuzzy
+msgid "path to the namespace"
+msgstr "狀態的裝置"
+
+#: sys-utils/lsns.c:120
+#, fuzzy
+msgid "number of processes in the namespace"
+msgstr "最大行程數量"
+
+#: sys-utils/lsns.c:121
+msgid "lowest PID in the namespace"
+msgstr ""
+
+#: sys-utils/lsns.c:122
+msgid "PPID of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:123
+msgid "command line of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:124
+msgid "UID of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:125
+msgid "username of the PID"
+msgstr ""
+
+#: sys-utils/lsns.c:126
+msgid "namespace ID as used by network subsystem"
+msgstr ""
+
+#: sys-utils/lsns.c:127
+msgid "nsfs mountpoint (usually used network subsystem)"
+msgstr ""
+
+#: sys-utils/lsns.c:128
+#, fuzzy
+msgid "parent namespace identifier (inode number)"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/lsns.c:129
+#, fuzzy
+msgid "owner namespace identifier (inode number)"
+msgstr "邏輯的 NUMA 節點數字"
+
+#: sys-utils/lsns.c:1285
+#, fuzzy, c-format
+msgid " %s [options] [<namespace>]\n"
+msgstr " %s [選項] [訊息]\n"
+
+#: sys-utils/lsns.c:1288
+#, fuzzy
+msgid "List system namespaces.\n"
+msgstr "無法設定系統時鐘。\n"
+
+#: sys-utils/lsns.c:1296
+#, fuzzy
+msgid " -P, --persistent namespaces without processes\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: sys-utils/lsns.c:1297
+#, fuzzy
+msgid " -p, --task <pid> print process namespaces\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/lsns.c:1300
+#, fuzzy
+msgid " -W, --nowrap don't use multi-line representation\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/lsns.c:1301
+msgid " -t, --type <name> namespace type (mnt, net, ipc, user, pid, uts, cgroup, time)\n"
+msgstr ""
+
+#: sys-utils/lsns.c:1302
+#, fuzzy
+msgid " -T, --tree <rel> use tree format (parent, owner, or process)\n"
+msgstr " -Q, --quiet-output 沒有一般輸出\n"
+
+#: sys-utils/lsns.c:1403
+#, fuzzy, c-format
+msgid "unknown namespace type: %s"
+msgstr "不明的資源類型：%s\n"
+
+#: sys-utils/lsns.c:1423
+#, fuzzy, c-format
+msgid "unknown tree type: %s"
+msgstr "不明的資源類型：%s\n"
+
+#: sys-utils/lsns.c:1445
+#, fuzzy
+msgid "--task is mutually exclusive with <namespace>"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/lsns.c:1446
+#, fuzzy
+msgid "invalid namespace argument"
+msgstr "無效的前端引數"
+
+#: sys-utils/lsns.c:1476
+msgid "--tree={parent|owner} is unsupported for your system"
+msgstr ""
+
+#: sys-utils/lsns.c:1504
+#, c-format
+msgid "not found namespace: %ju"
+msgstr ""
+
+#: sys-utils/mount.c:63 sys-utils/umount.c:126
+#, fuzzy
+msgid "drop permissions failed."
+msgstr "權限被拒"
+
+#: sys-utils/mount.c:83 sys-utils/umount.c:65
+#, fuzzy, c-format
+msgid "%s from %s (libmount %s"
+msgstr "%s 從 %s (libmount %s"
+
+#: sys-utils/mount.c:130
+#, fuzzy
+msgid "failed to read mtab"
+msgstr "讀取 mtab 時失敗"
+
+#: sys-utils/mount.c:192 sys-utils/mount.c:259 sys-utils/umount.c:209
+#, fuzzy, c-format
+msgid "%-25s: ignored\n"
+msgstr "%-25s: 忽略\n"
+
+#: sys-utils/mount.c:193
+#, fuzzy, c-format
+msgid "%-25s: already mounted\n"
+msgstr "%-25s: 已經掛載\n"
+
+#: sys-utils/mount.c:300
+#, fuzzy, c-format
+msgid "%s: %s moved to %s.\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/mount.c:302
+#, fuzzy, c-format
+msgid "%s: %s bound on %s.\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/mount.c:305 sys-utils/mount.c:309
+#, fuzzy, c-format
+msgid "%s: %s mounted on %s.\n"
+msgstr "%s：掛載的於 %s"
+
+#: sys-utils/mount.c:307
+#, c-format
+msgid "%s: %s propagation flags changed.\n"
+msgstr ""
+
+#: sys-utils/mount.c:327
+#, fuzzy, c-format
+msgid ""
+"mount: %s does not contain SELinux labels.\n"
+" You just mounted a file system that supports labels which does not\n"
+" contain labels, onto an SELinux box. It is likely that confined\n"
+" applications will generate AVC messages and not be allowed access to\n"
+" this file system. For more details see restorecon(8) and mount(8).\n"
+msgstr ""
+"mount：%s 不包含 SELinux 標籤。\n"
+" 您剛掛載了支援標籤的檔案系統，它卻在 SELinux 框上\n"
+" 不包含標籤。似乎受限的應用程式\n"
+" 將產生 AVC 訊息，並且不被允許去存取\n"
+" 這個檔案系統。要獲得更多細節請參看 restorecon(8) 和 mount(8)。\n"
+
+#: sys-utils/mount.c:356
+#, c-format
+msgid ""
+"mount: (hint) your fstab has been modified, but systemd still uses\n"
+" the old version; use 'systemctl daemon-reload' to reload.\n"
+msgstr ""
+
+#: sys-utils/mount.c:388
+#, c-format
+msgid " dmesg(1) may have more information after failed mount system call.\n"
+msgstr ""
+
+#: sys-utils/mount.c:417
+#, fuzzy, c-format
+msgid "%s: failed to parse"
+msgstr "%s：無法剖析"
+
+#: sys-utils/mount.c:459
+#, fuzzy, c-format
+msgid "unsupported option format: %s"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/mount.c:465
+#, fuzzy, c-format
+msgid "failed to append option '%s'"
+msgstr "附加選項時失敗"
+
+#: sys-utils/mount.c:486
+#, fuzzy, c-format
+msgid ""
+" %1$s [-lhV]\n"
+" %1$s -a [options]\n"
+" %1$s [options] [--source] <source> | [--target] <directory>\n"
+" %1$s [options] <source> <directory>\n"
+" %1$s <operation> <mountpoint> [<target>]\n"
+msgstr ""
+" %1$s [-lhV]\n"
+" %1$s -a [選項]\n"
+" %1$s [選項] [--source] <source>|[--target]<目錄>\n"
+" %1$s [選項]<來源><目錄>\n"
+" %1$s<作業><mountpoint>[<目標>]\n"
+
+#: sys-utils/mount.c:494
+#, fuzzy
+msgid "Mount a filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/mount.c:497
+#, fuzzy
+msgid " -a, --all mount all filesystems mentioned in fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/mount.c:498 sys-utils/umount.c:94
+msgid " -c, --no-canonicalize don't canonicalize paths\n"
+msgstr ""
+
+#: sys-utils/mount.c:499
+#, fuzzy
+msgid " -f, --fake dry run; skip the mount(2) syscall\n"
+msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#: sys-utils/mount.c:500
+#, fuzzy
+msgid " -F, --fork fork off for each device (use with -a)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/mount.c:501
+#, fuzzy
+msgid " -T, --fstab <path> alternative file to /etc/fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/mount.c:502
+msgid " -i, --internal-only don't call the mount.<type> helpers\n"
+msgstr ""
+
+#: sys-utils/mount.c:503
+#, fuzzy
+msgid " -l, --show-labels show also filesystem labels\n"
+msgstr " -l, --limits 顯示資源限度\n"
+
+#: sys-utils/mount.c:504
+msgid " -m, --mkdir[=<mode>] alias to '-o X-mount.mkdir[=<mode>]'\n"
+msgstr ""
+
+#: sys-utils/mount.c:505 sys-utils/umount.c:99
+#, fuzzy
+msgid " -n, --no-mtab don't write to /etc/mtab\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/mount.c:506
+msgid ""
+" --options-mode <mode>\n"
+" what to do with options loaded from fstab\n"
+msgstr ""
+
+#: sys-utils/mount.c:508
+#, fuzzy
+msgid ""
+" --options-source <source>\n"
+" mount options source\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/mount.c:510
+msgid ""
+" --options-source-force\n"
+" force use of options from fstab/mtab\n"
+msgstr ""
+
+#: sys-utils/mount.c:512
+#, fuzzy
+msgid " --onlyonce check if filesystem is already mounted\n"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/mount.c:513
+#, fuzzy
+msgid " -o, --options <list> comma-separated list of mount options\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/mount.c:514 sys-utils/umount.c:101
+msgid " -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
+msgstr ""
+
+#: sys-utils/mount.c:515
+#, fuzzy
+msgid " -r, --read-only mount the filesystem read-only (same as -o ro)\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/mount.c:516 sys-utils/umount.c:104
+#, fuzzy
+msgid " -t, --types <list> limit the set of filesystem types\n"
+msgstr " l 列出已知檔案系統類型"
+
+#: sys-utils/mount.c:517
+#, fuzzy
+msgid " --source <src> explicitly specifies source (path, label, uuid)\n"
+msgstr ""
+" --source <src> 明確的指定來源 (路徑、標貼，uuid)\n"
+" --target<目標> 明確的指定 mountpoint\n"
+
+#: sys-utils/mount.c:518
+#, fuzzy
+msgid " --target <target> explicitly specifies mountpoint\n"
+msgstr ""
+" --source <src> 明確的指定來源 (路徑、標貼，uuid)\n"
+" --target<目標> 明確的指定 mountpoint\n"
+
+#: sys-utils/mount.c:519
+#, fuzzy
+msgid ""
+" --target-prefix <path>\n"
+" specifies path used for all mountpoints\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: sys-utils/mount.c:521 sys-utils/umount.c:105
+#, fuzzy
+msgid " -v, --verbose say what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: sys-utils/mount.c:522
+msgid " -w, --rw, --read-write mount the filesystem read-write (default)\n"
+msgstr ""
+
+#: sys-utils/mount.c:523
+#, fuzzy
+msgid " -N, --namespace <ns> perform mount in another namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/mount.c:529
+#, fuzzy
+msgid "Source:\n"
+msgstr "資源名稱"
+
+#: sys-utils/mount.c:530
+#, fuzzy
+msgid " -L, --label <label> synonym for LABEL=<label>\n"
+msgstr " -o, --office <office> 辦公室數字\n"
+
+#: sys-utils/mount.c:531
+#, fuzzy
+msgid " -U, --uuid <uuid> synonym for UUID=<uuid>\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: sys-utils/mount.c:532
+#, fuzzy
+msgid " LABEL=<label> specifies device by filesystem label\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/mount.c:533
+msgid " UUID=<uuid> specifies device by filesystem UUID\n"
+msgstr ""
+
+#: sys-utils/mount.c:534
+msgid " PARTLABEL=<label> specifies device by partition label\n"
+msgstr ""
+
+#: sys-utils/mount.c:535
+msgid " PARTUUID=<uuid> specifies device by partition UUID\n"
+msgstr ""
+
+#: sys-utils/mount.c:536
+#, fuzzy
+msgid " ID=<id> specifies device by udev hardware ID\n"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/mount.c:537
+#, fuzzy
+msgid " <device> specifies device by path\n"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/mount.c:538
+msgid " <directory> mountpoint for bind mounts (see --bind/rbind)\n"
+msgstr ""
+
+#: sys-utils/mount.c:539
+#, fuzzy
+msgid " <file> regular file for loopdev setup\n"
+msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#: sys-utils/mount.c:542
+#, fuzzy
+#| msgid ""
+#| "\n"
+#| "Options:\n"
+msgid "Operations:\n"
+msgstr ""
+"\n"
+"選項：\n"
+
+#: sys-utils/mount.c:543
+#, fuzzy
+msgid " -B, --bind mount a subtree somewhere else (same as -o bind)\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/mount.c:544
+#, fuzzy
+msgid " -M, --move move a subtree to some other place\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: sys-utils/mount.c:545
+#, fuzzy
+msgid " -R, --rbind mount a subtree and all submounts somewhere else\n"
+msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#: sys-utils/mount.c:546
+#, fuzzy
+msgid " --make-shared mark a subtree as shared\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/mount.c:547
+#, fuzzy
+msgid " --make-slave mark a subtree as slave\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/mount.c:548
+msgid " --make-private mark a subtree as private\n"
+msgstr ""
+
+#: sys-utils/mount.c:549
+msgid " --make-unbindable mark a subtree as unbindable\n"
+msgstr ""
+
+#: sys-utils/mount.c:550
+#, fuzzy
+msgid " --make-rshared recursively mark a whole subtree as shared\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/mount.c:551
+msgid " --make-rslave recursively mark a whole subtree as slave\n"
+msgstr ""
+
+#: sys-utils/mount.c:552
+msgid " --make-rprivate recursively mark a whole subtree as private\n"
+msgstr ""
+
+#: sys-utils/mount.c:553
+msgid " --make-runbindable recursively mark a whole subtree as unbindable\n"
+msgstr ""
+
+#: sys-utils/mount.c:704 sys-utils/umount.c:520
+#, fuzzy
+msgid "libmount context allocation failed"
+msgstr "libmount 語境配額失敗"
+
+#: sys-utils/mount.c:766 sys-utils/umount.c:582
+#, fuzzy
+msgid "failed to set options pattern"
+msgstr "設定選項胚騰時失敗"
+
+#: sys-utils/mount.c:818 sys-utils/umount.c:599
+#, fuzzy, c-format
+msgid "failed to set target namespace to %s"
+msgstr "設定身分為 %s 時失敗"
+
+#: sys-utils/mount.c:986
+#, fuzzy
+msgid "source specified more than once"
+msgstr "您指定了比磁碟上還多的磁柱數"
+
+#: sys-utils/mountpoint.c:121
+#, fuzzy, c-format
+msgid ""
+" %1$s [-qd] /path/to/directory\n"
+" %1$s -x /dev/device\n"
+msgstr ""
+" %1$s [-qd]/路徑/到/目錄\n"
+" %1$s -x/dev/裝置\n"
+
+#: sys-utils/mountpoint.c:125
+msgid "Check whether a directory or file is a mountpoint.\n"
+msgstr ""
+
+#: sys-utils/mountpoint.c:128
+#, fuzzy
+msgid ""
+" -q, --quiet quiet mode - don't print anything\n"
+" --nofollow do not follow symlink\n"
+" -d, --fs-devno print maj:min device number of the filesystem\n"
+" -x, --devno print maj:min device number of the block device\n"
+msgstr ""
+" -q, --quiet 無訊息模式 - 不列印任何事\n"
+" -d, --fs-devno 列印 maj：最小裝置編號的檔案系統\n"
+" -x, --devno 列印 maj：最小裝置編號的區塊裝置\n"
+
+#: sys-utils/mountpoint.c:210
+#, fuzzy, c-format
+msgid "%s is not a mountpoint\n"
+msgstr "%s 並非 mountpoint\n"
+
+#: sys-utils/mountpoint.c:216
+#, fuzzy, c-format
+msgid "%s is a mountpoint\n"
+msgstr "%s 是 mountpoint\n"
+
+#: sys-utils/nsenter.c:78 sys-utils/setarch.c:139 sys-utils/unshare.c:643
+#, fuzzy, c-format
+msgid " %s [options] [<program> [<argument>...]]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/nsenter.c:82
+msgid "Run a program with namespaces of other processes.\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:85
+#, fuzzy
+msgid " -a, --all enter all namespaces\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/nsenter.c:86
+msgid " -t, --target <pid> target process to get namespaces from\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:87
+#, fuzzy
+msgid " -m, --mount[=<file>] enter mount namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:88
+#, fuzzy
+msgid " -u, --uts[=<file>] enter UTS namespace (hostname etc)\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:89
+#, fuzzy
+msgid " -i, --ipc[=<file>] enter System V IPC namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:90
+#, fuzzy
+msgid " -n, --net[=<file>] enter network namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:91
+#, fuzzy
+msgid " -p, --pid[=<file>] enter pid namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:92
+#, fuzzy
+msgid " -C, --cgroup[=<file>] enter cgroup namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:93
+#, fuzzy
+msgid " -U, --user[=<file>] enter user namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:94
+#, fuzzy
+msgid " -T, --time[=<file>] enter time namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/nsenter.c:95
+#, fuzzy
+msgid " -S, --setuid[=<uid>] set uid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/nsenter.c:96
+#, fuzzy
+msgid " -G, --setgid[=<gid>] set gid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/nsenter.c:97
+msgid " --preserve-credentials do not touch uids or gids\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:98
+#, fuzzy
+msgid " -r, --root[=<dir>] set the root directory\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/nsenter.c:99
+#, fuzzy
+msgid " -w, --wd[=<dir>] set the working directory\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/nsenter.c:100
+#, fuzzy
+msgid " -W, --wdns <dir> set the working directory in namespace\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/nsenter.c:101
+#, fuzzy
+msgid " -e, --env inherit environment variables from target process\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/nsenter.c:102
+msgid " -F, --no-fork do not fork before exec'ing <program>\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:104
+msgid " -Z, --follow-context set SELinux context according to --target PID\n"
+msgstr ""
+
+#: sys-utils/nsenter.c:131
+#, c-format
+msgid "neither filename nor target pid supplied for %s"
+msgstr ""
+
+#: sys-utils/nsenter.c:353 sys-utils/unshare.c:828 sys-utils/unshare.c:884
+#, fuzzy
+msgid "failed to parse uid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/nsenter.c:360 sys-utils/unshare.c:832 sys-utils/unshare.c:888
+#, fuzzy
+msgid "failed to parse gid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/nsenter.c:406
+msgid "no target PID specified for --follow-context"
+msgstr ""
+
+#: sys-utils/nsenter.c:408
+#, fuzzy, c-format
+msgid "failed to get %d SELinux context"
+msgstr "無法建立新的 selinux 相關項目"
+
+#: sys-utils/nsenter.c:411
+#, fuzzy, c-format
+msgid "failed to set exec context to '%s'"
+msgstr "設定身分為 %s 時失敗"
+
+#: sys-utils/nsenter.c:418
+#, fuzzy
+msgid "no target PID specified for --all"
+msgstr "您指定了比磁碟上還多的磁柱數"
+
+#: sys-utils/nsenter.c:482
+#, fuzzy, c-format
+msgid "reassociate to namespace '%s' failed"
+msgstr "讀取系統時間失敗"
+
+#: sys-utils/nsenter.c:498 sys-utils/nsenter.c:521
+#, fuzzy
+msgid "cannot open current working directory"
+msgstr "%s：無法變更工作目錄 %s：%m"
+
+#: sys-utils/nsenter.c:505
+#, fuzzy
+msgid "change directory by root file descriptor failed"
+msgstr "變更目錄到系統根失敗"
+
+#: sys-utils/nsenter.c:508
+#, fuzzy
+msgid "chroot failed"
+msgstr "掛載失敗"
+
+#: sys-utils/nsenter.c:528
+#, fuzzy
+msgid "change directory by working directory file descriptor failed"
+msgstr "變更目錄到系統根失敗"
+
+#: sys-utils/nsenter.c:537
+#, fuzzy
+msgid "failed to get environment variables"
+msgstr "設定 %s 資源限制時失敗"
+
+#: sys-utils/nsenter.c:540
+#, fuzzy
+msgid "failed to set environment variables"
+msgstr "設定 %s 資源限制時失敗"
+
+#: sys-utils/nsenter.c:549
+#, fuzzy
+msgid "can not get process stat"
+msgstr "無法存取 %s"
+
+#: sys-utils/nsenter.c:565 sys-utils/setpriv.c:1025 sys-utils/setpriv.c:1032
+#: sys-utils/unshare.c:1085
+#, fuzzy
+msgid "setgroups failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/pivot_root.c:34
+#, fuzzy, c-format
+msgid " %s [options] new_root put_old\n"
+msgstr " %s [選項] new_root put_old\n"
+
+#: sys-utils/pivot_root.c:38
+#, fuzzy
+msgid "Change the root filesystem.\n"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/pivot_root.c:75
+#, fuzzy, c-format
+msgid "failed to change root from `%s' to `%s'"
+msgstr "變更根從『%s』到『%s 時失敗』"
+
+#: sys-utils/prlimit.c:77
+#, fuzzy
+msgid "address space limit"
+msgstr "位址空間限制"
+
+#: sys-utils/prlimit.c:78
+#, fuzzy
+msgid "max core file size"
+msgstr "最大記憶體檔案大小"
+
+#: sys-utils/prlimit.c:79
+#, fuzzy
+msgid "CPU time"
+msgstr "CPU 時間"
+
+#: sys-utils/prlimit.c:79
+#, fuzzy
+msgid "seconds"
+msgstr "秒"
+
+#: sys-utils/prlimit.c:80
+#, fuzzy
+msgid "max data size"
+msgstr "最大資料大小"
+
+#: sys-utils/prlimit.c:81
+#, fuzzy
+msgid "max file size"
+msgstr "最大檔案大小"
+
+#: sys-utils/prlimit.c:82
+#, fuzzy
+msgid "max number of file locks held"
+msgstr "最大檔案鎖定數量延遲"
+
+#: sys-utils/prlimit.c:82
+#, fuzzy
+msgid "locks"
+msgstr "區塊"
+
+#: sys-utils/prlimit.c:83
+#, fuzzy
+msgid "max locked-in-memory address space"
+msgstr "最大 locked-in-memory 位址空間"
+
+#: sys-utils/prlimit.c:84
+#, fuzzy
+msgid "max bytes in POSIX mqueues"
+msgstr "最大位元組在中 POSIX mqueues"
+
+#: sys-utils/prlimit.c:85
+#, fuzzy
+msgid "max nice prio allowed to raise"
+msgstr "最大好 prio 允許到引發"
+
+#: sys-utils/prlimit.c:86
+#, fuzzy
+msgid "max number of open files"
+msgstr "最大開啟檔案數量"
+
+#: sys-utils/prlimit.c:86
+#, fuzzy
+msgid "files"
+msgstr "檔案 %s"
+
+#: sys-utils/prlimit.c:87
+#, fuzzy
+msgid "max number of processes"
+msgstr "最大行程數量"
+
+#: sys-utils/prlimit.c:88
+#, fuzzy
+msgid "max resident set size"
+msgstr "最大常駐設定大小"
+
+#: sys-utils/prlimit.c:89
+#, fuzzy
+msgid "max real-time priority"
+msgstr "最大即時優先權"
+
+#: sys-utils/prlimit.c:90
+#, fuzzy
+msgid "timeout for real-time tasks"
+msgstr "逾時用於即時事務"
+
+#: sys-utils/prlimit.c:90
+#, fuzzy
+msgid "microsecs"
+msgstr "microsecs"
+
+#: sys-utils/prlimit.c:91
+#, fuzzy
+msgid "max number of pending signals"
+msgstr "最大擱置信號數量"
+
+#: sys-utils/prlimit.c:91
+msgid "signals"
+msgstr ""
+
+#: sys-utils/prlimit.c:92
+#, fuzzy
+msgid "max stack size"
+msgstr "最大堆疊大小"
+
+#: sys-utils/prlimit.c:125
+#, fuzzy
+msgid "resource name"
+msgstr "資源名稱"
+
+#: sys-utils/prlimit.c:126
+#, fuzzy
+msgid "resource description"
+msgstr "資源描述"
+
+#: sys-utils/prlimit.c:127
+#, fuzzy
+msgid "soft limit"
+msgstr "軟式限制"
+
+#: sys-utils/prlimit.c:128
+#, fuzzy
+msgid "hard limit (ceiling)"
+msgstr "強制限制 (頂符號)"
+
+#: sys-utils/prlimit.c:129
+#, fuzzy
+msgid "units"
+msgstr "單位"
+
+#: sys-utils/prlimit.c:168
+#, fuzzy, c-format
+msgid " %s [options] [--<resource>=<limit>] [-p PID]\n"
+msgstr " %s [選項] [-p PID]\n"
+
+#: sys-utils/prlimit.c:170
+#, fuzzy, c-format
+msgid " %s [options] [--<resource>=<limit>] COMMAND\n"
+msgstr " %s [選項] 命令\n"
+
+#: sys-utils/prlimit.c:173
+msgid "Show or change the resource limits of a process.\n"
+msgstr ""
+
+#: sys-utils/prlimit.c:176
+#, fuzzy
+msgid ""
+" -p, --pid <pid> process id\n"
+" -o, --output <list> define which output columns to use\n"
+" --noheadings don't print headings\n"
+" --raw use the raw output format\n"
+" --verbose verbose output\n"
+msgstr ""
+" -p, --pid <pid> 處理識別號\n"
+" -o, --output<清單> 定義該項輸出欄位以使用\n"
+" --noheadings 不列印標頭\n"
+" --raw 使用原始輸出格式\n"
+" --verbose 詳細的輸出\n"
+" -h, --help 顯示這份說明然後離開\n"
+" -V, --version 輸出版本資訊然後離開\n"
+
+#: sys-utils/prlimit.c:184
+#, fuzzy
+msgid ""
+"\n"
+"Resources:\n"
+msgstr "資源名稱"
+
+#: sys-utils/prlimit.c:185
+#, fuzzy
+msgid ""
+" -c, --core maximum size of core files created\n"
+" -d, --data maximum size of a process's data segment\n"
+" -e, --nice maximum nice priority allowed to raise\n"
+" -f, --fsize maximum size of files written by the process\n"
+" -i, --sigpending maximum number of pending signals\n"
+" -l, --memlock maximum size a process may lock into memory\n"
+" -m, --rss maximum resident set size\n"
+" -n, --nofile maximum number of open files\n"
+" -q, --msgqueue maximum bytes in POSIX message queues\n"
+" -r, --rtprio maximum real-time scheduling priority\n"
+" -s, --stack maximum stack size\n"
+" -t, --cpu maximum amount of CPU time in seconds\n"
+" -u, --nproc maximum number of user processes\n"
+" -v, --as size of virtual memory\n"
+" -x, --locks maximum number of file locks\n"
+" -y, --rttime CPU time in microseconds a process scheduled\n"
+" under real-time scheduling\n"
+msgstr ""
+" -c, --core 最大容量的記憶體檔案建立\n"
+" -d, --data 最大容量的處理資料區段\n"
+" -e, --nice 最大值好優先權允許到引發\n"
+" -f, --fsize 最大容量的檔案作者處理\n"
+" -i, --sigpending 最大值擱置信號數量\n"
+" -l, --memlock 最大容量處理也許會鎖定進入記憶體\n"
+" -m, --rss 最大值常駐設定大小\n"
+" -n, --nofile 最大值開啟檔案數量\n"
+" -q, --msgqueue 最大值位元組在中 POSIX 訊息佇列\n"
+" -r, --rtprio 最大值即時排程優先權\n"
+" -s, --stack 最大值堆疊大小\n"
+" -t, --cpu 最大值數目的 CPU 時間的秒數\n"
+" -u, --nproc 最大值使用者行程數量\n"
+" -v, --as 大小的虛擬記憶體\n"
+" -x, --locks 最大值檔案鎖定數量\n"
+" -y, --rttime CPU 時間在中 microseconds 處理已排程\n"
+" 之下即時排程\n"
+
+#: sys-utils/prlimit.c:205
+msgid ""
+" <limit> is defined as a range soft:hard, soft:, :hard or a value to\n"
+" define both limits (e.g. -e=0:10 -r=:10).\n"
+msgstr ""
+
+#: sys-utils/prlimit.c:256 sys-utils/prlimit.c:262 sys-utils/prlimit.c:379
+#: sys-utils/prlimit.c:384
+#, fuzzy
+msgid "unlimited"
+msgstr "無限制的"
+
+#: sys-utils/prlimit.c:345
+#, fuzzy, c-format
+msgid "failed to get old %s limit"
+msgstr "提取舊的 %s 限制時失敗"
+
+#: sys-utils/prlimit.c:369
+#, fuzzy, c-format
+msgid "the soft limit %s cannot exceed the hard limit"
+msgstr "軟式限制 %s 無法超出強制限制"
+
+#: sys-utils/prlimit.c:376
+#, fuzzy, c-format
+msgid "New %s limit for pid %d: "
+msgstr "新 %s 限制："
+
+#: sys-utils/prlimit.c:391
+#, fuzzy, c-format
+msgid "failed to set the %s resource limit"
+msgstr "設定 %s 資源限制時失敗"
+
+#: sys-utils/prlimit.c:392
+#, fuzzy, c-format
+msgid "failed to get the %s resource limit"
+msgstr "提取 %s 資源限制時失敗"
+
+#: sys-utils/prlimit.c:474
+#, fuzzy, c-format
+msgid "failed to parse %s limit"
+msgstr "剖析 %s 限制時失敗"
+
+#: sys-utils/prlimit.c:603
+#, fuzzy
+msgid "option --pid may be specified only once"
+msgstr "選項 --pid 也許會被指定的只一次"
+
+#: sys-utils/prlimit.c:632
+#, fuzzy
+msgid "options --pid and COMMAND are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/readprofile.c:109
+msgid "Display kernel profiling information.\n"
+msgstr ""
+
+#: sys-utils/readprofile.c:113
+#, fuzzy, c-format
+msgid " -m, --mapfile <mapfile> (defaults: \"%s\" and\n"
+msgstr " -m, --mapfile <mapfile> (預設值：「%s」和\n"
+
+#: sys-utils/readprofile.c:115
+#, fuzzy, c-format
+msgid " \"%s\")\n"
+msgstr " 「%s」)\n"
+
+#: sys-utils/readprofile.c:117
+#, fuzzy, c-format
+msgid " -p, --profile <pro-file> (default: \"%s\")\n"
+msgstr " -p, --profile <pro-file> (預設：「%s」)\n"
+
+#: sys-utils/readprofile.c:118
+#, fuzzy
+msgid " -M, --multiplier <mult> set the profiling multiplier to <mult>\n"
+msgstr " -M, --multiplier <mult> 設定側寫檔倍數到<mult>\n"
+
+#: sys-utils/readprofile.c:119
+#, fuzzy
+msgid " -i, --info print only info about the sampling step\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: sys-utils/readprofile.c:120
+#, fuzzy
+msgid " -v, --verbose print verbose data\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/readprofile.c:121
+#, fuzzy
+msgid " -a, --all print all symbols, even if count is 0\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/readprofile.c:122
+#, fuzzy
+msgid " -b, --histbin print individual histogram-bin counts\n"
+msgstr " -b, --histbin 列印個別 histogram-bin 計數\n"
+
+#: sys-utils/readprofile.c:123
+#, fuzzy
+msgid " -s, --counters print individual counters within functions\n"
+msgstr " -s, --counters 列印個別計數器在之內函式\n"
+
+#: sys-utils/readprofile.c:124
+#, fuzzy
+msgid " -r, --reset reset all the counters (root only)\n"
+msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+
+#: sys-utils/readprofile.c:125
+#, fuzzy
+msgid " -n, --no-auto disable byte order auto-detection\n"
+msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
+
+#: sys-utils/readprofile.c:204
+#, fuzzy
+#| msgid "failed to parse pid"
+msgid "failed to parse multiplier"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/readprofile.c:242
+#, fuzzy, c-format
+msgid "error writing %s"
+msgstr "寫入 %s 時發生錯誤"
+
+#: sys-utils/readprofile.c:253
+#, fuzzy
+msgid "input file is empty"
+msgstr "檔案系統型態"
+
+#: sys-utils/readprofile.c:275
+#, fuzzy
+msgid "Assuming reversed byte order. Use -n to force native byte order."
+msgstr "假設反向的位元組次序。使用 -n 到強制原生位元組次序。"
+
+#: sys-utils/readprofile.c:290
+#, fuzzy, c-format
+msgid "Sampling_step: %u\n"
+msgstr "取樣率：%i\n"
+
+#: sys-utils/readprofile.c:306 sys-utils/readprofile.c:327
+#, fuzzy, c-format
+msgid "%s(%i): wrong map line"
+msgstr "%s(%i)：錯誤的映射列"
+
+#: sys-utils/readprofile.c:317
+#, fuzzy, c-format
+msgid "can't find \"_stext\" in %s"
+msgstr "找不到「stext」在中 %s(_S)"
+
+#: sys-utils/readprofile.c:350
+#, fuzzy
+msgid "profile address out of range. Wrong map file?"
+msgstr "側寫檔位址超出範圍。錯誤的映射檔案？"
+
+#: sys-utils/readprofile.c:411
+msgid "total"
+msgstr "總計"
+
+#: sys-utils/renice.c:52
+#, fuzzy
+msgid "process ID"
+msgstr "處理識別號"
+
+#: sys-utils/renice.c:53
+#, fuzzy
+msgid "process group ID"
+msgstr "處理群組識別號"
+
+#: sys-utils/renice.c:62
+#, fuzzy, c-format
+msgid ""
+" %1$s [-n|--priority|--relative] <priority> [-p|--pid] <pid>...\n"
+" %1$s [-n|--priority|--relative] <priority> -g|--pgrp <pgid>...\n"
+" %1$s [-n|--priority|--relative] <priority> -u|--user <user>...\n"
+msgstr ""
+" %1$s [-n] <priority> [-p]<pid>[<pid>...]\n"
+" %1$s [-n]<優先權> -g<pgrp>[<pgrp>...]\n"
+" %1$s [-n]<優先權> -u<使用者>[<使用者>...]\n"
+
+#: sys-utils/renice.c:68
+msgid "Alter the priority of running processes.\n"
+msgstr ""
+
+#: sys-utils/renice.c:71
+#, fuzzy
+msgid " -n <num> specify the nice value\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+
+#: sys-utils/renice.c:72
+#, fuzzy
+msgid " If POSIXLY_CORRECT flag is set in environment\n"
+msgstr " 「%s」)\n"
+
+#: sys-utils/renice.c:73
+#, fuzzy
+msgid " then the priority is 'relative' to current\n"
+msgstr " 「%s」)\n"
+
+#: sys-utils/renice.c:74
+#, fuzzy
+msgid " process priority. Otherwise it is 'absolute'.\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: sys-utils/renice.c:75
+#, fuzzy
+msgid " --priority <num> specify the 'absolute' nice value\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+
+#: sys-utils/renice.c:76
+#, fuzzy
+msgid " --relative <num> specify the 'relative' nice value\n"
+msgstr " -H# [或 --heads #]： 設定要用的磁頭數量"
+
+#: sys-utils/renice.c:77
+#, fuzzy
+msgid " -p, --pid interpret arguments as process ID (default)\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/renice.c:78
+#, fuzzy
+msgid " -g, --pgrp interpret arguments as process group ID\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/renice.c:79
+#, fuzzy
+msgid " -u, --user interpret arguments as username or user ID\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/renice.c:91
+#, fuzzy, c-format
+msgid "failed to get priority for %d (%s)"
+msgstr "提取優先權用於 %d (%s) 時失敗"
+
+#: sys-utils/renice.c:110
+#, fuzzy, c-format
+msgid "failed to set priority for %d (%s)"
+msgstr "設定優先權用於 %d (%s) 時失敗"
+
+#: sys-utils/renice.c:115
+#, fuzzy, c-format
+msgid "%d (%s) old priority %d, new priority %d\n"
+msgstr "%d (%s) 舊的優先權 %d，新優先權 %d\n"
+
+#: sys-utils/renice.c:181
+#, fuzzy, c-format
+msgid "invalid priority '%s'"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/renice.c:208
+#, fuzzy, c-format
+msgid "unknown user %s"
+msgstr "不明使用者 %s"
+
+#. TRANSLATORS: The first %s is one of the above
+#. * three ID names. Read: "bad value for %s: %s"
+#: sys-utils/renice.c:217
+#, fuzzy, c-format
+msgid "bad %s value: %s"
+msgstr "不當的值 %s"
+
+#: sys-utils/rfkill.c:131
+#, fuzzy
+msgid "kernel device name"
+msgstr "內部內核裝置名稱"
+
+#: sys-utils/rfkill.c:132
+#, fuzzy
+msgid "device identifier value"
+msgstr "裝置識別碼"
+
+#: sys-utils/rfkill.c:133
+msgid "device type name that can be used as identifier"
+msgstr ""
+
+#: sys-utils/rfkill.c:134
+#, fuzzy
+msgid "device type description"
+msgstr "旗標描述"
+
+#: sys-utils/rfkill.c:135
+#, fuzzy
+msgid "status of software block"
+msgstr "大小的鎖定"
+
+#: sys-utils/rfkill.c:136
+#, fuzzy
+msgid "status of hardware block"
+msgstr "大小的鎖定"
+
+#: sys-utils/rfkill.c:200
+#, fuzzy, c-format
+msgid "cannot set non-blocking %s"
+msgstr "無法開啟 %s"
+
+#: sys-utils/rfkill.c:221
+#, c-format
+msgid "wrong size of rfkill event: %zu < %zu"
+msgstr ""
+
+#: sys-utils/rfkill.c:259
+#, fuzzy, c-format
+msgid "failed to poll %s"
+msgstr "剖析 %s 時失敗"
+
+#: sys-utils/rfkill.c:328
+#, fuzzy
+msgid "invalid identifier"
+msgstr "裝置識別碼"
+
+#: sys-utils/rfkill.c:408 sys-utils/rfkill.c:411
+#, fuzzy
+msgid "blocked"
+msgstr "已鎖定"
+
+#: sys-utils/rfkill.c:408 sys-utils/rfkill.c:411
+#, fuzzy
+msgid "unblocked"
+msgstr "已鎖定"
+
+#: sys-utils/rfkill.c:430 sys-utils/rfkill.c:505 sys-utils/rfkill.c:546
+#: sys-utils/rfkill.c:582 sys-utils/rfkill.c:603
+#, fuzzy, c-format
+msgid "invalid identifier: %s"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:633
+#, fuzzy, c-format
+msgid " %s [options] command [identifier ...]\n"
+msgstr " %s [選項] [檔案]\n"
+
+#: sys-utils/rfkill.c:636
+msgid "Tool for enabling and disabling wireless devices.\n"
+msgstr ""
+
+#. TRANSLATORS: command names should not be translated, explaining
+#. them as additional field after identifier is fine, for example
+#. *
+#. list [identifier] (lista [tarkenne])
+#.
+#: sys-utils/rfkill.c:660
+msgid " help\n"
+msgstr ""
+
+#: sys-utils/rfkill.c:661
+msgid " event\n"
+msgstr ""
+
+#: sys-utils/rfkill.c:662
+#, fuzzy
+msgid " list [identifier]\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:663
+#, fuzzy
+msgid " block identifier\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:664
+#, fuzzy
+msgid " unblock identifier\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rfkill.c:665
+#, fuzzy
+msgid " toggle identifier\n"
+msgstr "磁碟識別碼：0x%08x\n"
+
+#: sys-utils/rtcwake.c:102
+msgid "Enter a system sleep state until a specified wakeup time.\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:105
+#, fuzzy
+msgid " -a, --auto reads the clock mode from adjust file (default)\n"
+msgstr " -n, --no-auto 停用位元組次序 auto-detection\n"
+
+#: sys-utils/rtcwake.c:107
+#, fuzzy, c-format
+msgid ""
+" -A, --adjfile <file> specifies the path to the adjust file\n"
+" the default is %s\n"
+msgstr ""
+" --noadjfile 不存取 %s；這個需求使用的\n"
+" 還是 --utc 或 --localtime\n"
+" --adjfile <file> 指定路徑到調整檔案；\n"
+" 預設是 %s\n"
+
+#: sys-utils/rtcwake.c:109
+msgid " --date <timestamp> date time of timestamp to wake\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:110
+msgid " -d, --device <device> select rtc device (rtc0|rtc1|...)\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:111
+msgid " -n, --dry-run does everything, but suspend\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:112
+#, fuzzy
+msgid " -l, --local RTC uses local timezone\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/rtcwake.c:113
+msgid " --list-modes list available modes\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:114
+msgid " -m, --mode <mode> standby|mem|... sleep mode\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:115
+msgid " -s, --seconds <seconds> seconds to sleep\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:116
+msgid " -t, --time <time_t> time to wake\n"
+msgstr ""
+
+#: sys-utils/rtcwake.c:117
+#, fuzzy
+msgid " -u, --utc RTC uses UTC\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/rtcwake.c:118
+#, fuzzy
+msgid " -v, --verbose verbose messages\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/rtcwake.c:168
+#, fuzzy
+msgid "read rtc time failed"
+msgstr "讀取 rtc 時間失敗"
+
+#: sys-utils/rtcwake.c:174
+#, fuzzy
+msgid "read system time failed"
+msgstr "讀取系統時間失敗"
+
+#: sys-utils/rtcwake.c:190
+#, fuzzy
+msgid "convert rtc time failed"
+msgstr "轉換 rtc 時間失敗"
+
+#: sys-utils/rtcwake.c:240
+#, fuzzy
+msgid "set rtc wake alarm failed"
+msgstr "設定 rtc 喚醒警示失敗"
+
+#: sys-utils/rtcwake.c:280
+#, fuzzy
+msgid "discarding stdin"
+msgstr "捨棄對齊偏移"
+
+#: sys-utils/rtcwake.c:331
+#, fuzzy, c-format
+msgid "unexpected third line in: %s: %s"
+msgstr "未預期的檔案結束於 %s"
+
+#: sys-utils/rtcwake.c:345 sys-utils/rtcwake.c:675
+#, fuzzy
+msgid "read rtc alarm failed"
+msgstr "讀取 rtc 警示失敗"
+
+#: sys-utils/rtcwake.c:350
+#, fuzzy, c-format
+msgid "alarm: off\n"
+msgstr "警示：關閉\n"
+
+#: sys-utils/rtcwake.c:363
+#, fuzzy
+msgid "convert time failed"
+msgstr "轉換時間失敗"
+
+#: sys-utils/rtcwake.c:369
+#, fuzzy, c-format
+msgid "alarm: on %s"
+msgstr "警示：於 %s"
+
+#: sys-utils/rtcwake.c:402
+#, fuzzy, c-format
+msgid "%s: unable to find device"
+msgstr "%s：無法找到裝置"
+
+#: sys-utils/rtcwake.c:413
+#, fuzzy, c-format
+msgid "could not read: %s"
+msgstr "無法讀取 %s"
+
+#: sys-utils/rtcwake.c:493
+#, fuzzy, c-format
+msgid "unrecognized suspend state '%s'"
+msgstr "無法辨識的懸置狀態『%s』"
+
+#: sys-utils/rtcwake.c:501
+#, fuzzy
+msgid "invalid seconds argument"
+msgstr "無效的秒引數"
+
+#: sys-utils/rtcwake.c:505
+#, fuzzy
+msgid "invalid time argument"
+msgstr "無效的時間引數"
+
+#: sys-utils/rtcwake.c:532
+#, c-format
+msgid "%s: assuming RTC uses UTC ...\n"
+msgstr "%s：假設 RTC 使用 UTC …\n"
+
+#: sys-utils/rtcwake.c:537
+msgid "Using UTC time.\n"
+msgstr "使用 UTC 時間。\n"
+
+#: sys-utils/rtcwake.c:538
+msgid "Using local time.\n"
+msgstr "使用當地時間。\n"
+
+#: sys-utils/rtcwake.c:541
+#, fuzzy
+msgid "must provide wake time (see --seconds, --time and --date options)"
+msgstr "必須提供喚醒時間 (參看 -t 和 -s 選項)"
+
+#: sys-utils/rtcwake.c:547
+#, fuzzy, c-format
+msgid "%s not enabled for wakeup events"
+msgstr "%s 未啟用用於 wakeup 事件"
+
+#: sys-utils/rtcwake.c:554
+#, fuzzy, c-format
+#| msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
+msgid "alarm %<PRId64>, sys_time %<PRId64>, rtc_time %<PRId64>, seconds %<PRIu64>\n"
+msgstr "警示 %ld，系統時間 %ld，rtc 時間 %ld，秒數 %u\n"
+
+#: sys-utils/rtcwake.c:567
+#, fuzzy, c-format
+msgid "time doesn't go backward to %s"
+msgstr "時間不前往退一步到 %s"
+
+#: sys-utils/rtcwake.c:580
+#, fuzzy, c-format
+msgid "%s: wakeup using %s at %s"
+msgstr "%s：wakeup 使用 %s 於 %s"
+
+#: sys-utils/rtcwake.c:586
+#, fuzzy, c-format
+msgid "%s: wakeup from \"%s\" using %s at %s"
+msgstr "%s：wakeup 從「%s」使用 %s 於 %s"
+
+#: sys-utils/rtcwake.c:596
+#, c-format
+msgid "suspend mode: no; leaving\n"
+msgstr "懸置模式：無；離開\n"
+
+#: sys-utils/rtcwake.c:619
+#, c-format
+msgid "suspend mode: off; executing %s\n"
+msgstr "懸置模式：關閉；執行 %s\n"
+
+#: sys-utils/rtcwake.c:628
+#, fuzzy
+msgid "failed to find shutdown command"
+msgstr "讀取時失敗：%s"
+
+#: sys-utils/rtcwake.c:638
+#, c-format
+msgid "suspend mode: on; reading rtc\n"
+msgstr "懸置模式：開啟；讀取 rtc\n"
+
+#: sys-utils/rtcwake.c:643
+#, fuzzy
+msgid "rtc read failed"
+msgstr "rtc 讀取失敗"
+
+#: sys-utils/rtcwake.c:655
+#, c-format
+msgid "suspend mode: disable; disabling alarm\n"
+msgstr "懸置模式：停用；停用警示\n"
+
+#: sys-utils/rtcwake.c:659
+#, fuzzy, c-format
+msgid "suspend mode: show; printing alarm info\n"
+msgstr "懸置模式：顯示；列印警示資訊\n"
+
+#: sys-utils/rtcwake.c:666
+#, c-format
+msgid "suspend mode: %s; suspending system\n"
+msgstr "懸置模式：%s；懸置系統\n"
+
+#: sys-utils/rtcwake.c:680
+#, fuzzy
+msgid "disable rtc alarm interrupt failed"
+msgstr "停用 rtc 警示插斷失敗"
+
+#: sys-utils/setarch.c:50
+#, c-format
+msgid "Switching on %s.\n"
+msgstr "切換於 %s。\n"
+
+#: sys-utils/setarch.c:137
+#, fuzzy, c-format
+msgid " %s [<arch>] [options] [<program> [<argument>...]]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/setarch.c:142
+msgid "Change the reported architecture and set personality flags.\n"
+msgstr ""
+
+#: sys-utils/setarch.c:145
+msgid " -B, --32bit turns on ADDR_LIMIT_32BIT\n"
+msgstr ""
+
+#: sys-utils/setarch.c:146
+msgid " -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
+msgstr ""
+
+#: sys-utils/setarch.c:147
+msgid " -I, --short-inode turns on SHORT_INODE\n"
+msgstr ""
+
+#: sys-utils/setarch.c:148
+msgid " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
+msgstr ""
+
+#: sys-utils/setarch.c:149
+msgid " -R, --addr-no-randomize disables randomization of the virtual address space\n"
+msgstr ""
+
+#: sys-utils/setarch.c:150
+msgid " -S, --whole-seconds turns on WHOLE_SECONDS\n"
+msgstr ""
+
+#: sys-utils/setarch.c:151
+msgid " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
+msgstr ""
+
+#: sys-utils/setarch.c:152
+msgid " -X, --read-implies-exec turns on READ_IMPLIES_EXEC\n"
+msgstr ""
+
+#: sys-utils/setarch.c:153
+msgid " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
+msgstr ""
+
+#: sys-utils/setarch.c:154
+msgid " -3, --3gb limits the used address space to a maximum of 3 GB\n"
+msgstr ""
+
+#: sys-utils/setarch.c:155
+msgid " --4gb ignored (for backward compatibility only)\n"
+msgstr ""
+
+#: sys-utils/setarch.c:156
+msgid " --uname-2.6 turns on UNAME26\n"
+msgstr ""
+
+#: sys-utils/setarch.c:157
+#, fuzzy
+msgid " -v, --verbose say what options are being switched on\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: sys-utils/setarch.c:160
+msgid " --list list settable architectures, and exit\n"
+msgstr ""
+
+#: sys-utils/setarch.c:161
+msgid " --show[=personality] show current or specific personality and exit\n"
+msgstr ""
+
+#: sys-utils/setarch.c:341
+#, fuzzy, c-format
+msgid "Kernel cannot set architecture to %s"
+msgstr "無法設定逾時用於 %s"
+
+#: sys-utils/setarch.c:406
+msgid "Can not get current kernel personality"
+msgstr ""
+
+#: sys-utils/setarch.c:459
+msgid "Not enough arguments"
+msgstr "引數不足"
+
+#: sys-utils/setarch.c:527
+#, fuzzy
+msgid "unrecognized option '--list'"
+msgstr "無法辨識的輸入：%s"
+
+#: sys-utils/setarch.c:536
+#, fuzzy
+msgid "could not parse personality"
+msgstr "掛載"
+
+#: sys-utils/setarch.c:540
+#, fuzzy
+msgid "unrecognized option '--show'"
+msgstr "無法辨識的輸入：%s"
+
+#: sys-utils/setarch.c:554
+#, fuzzy
+msgid "no architecture argument or personality flags specified"
+msgstr "未指定任何長度引數"
+
+#: sys-utils/setarch.c:566
+#, c-format
+msgid "%s: Unrecognized architecture"
+msgstr "%s：無法辨識的架構"
+
+#: sys-utils/setarch.c:584
+#, fuzzy, c-format
+msgid "failed to set personality to %s"
+msgstr "設定身分為 %s 時失敗"
+
+#: sys-utils/setarch.c:596
+#, fuzzy, c-format
+msgid "Execute command `%s'.\n"
+msgstr "執行日期命令：%s\n"
+
+#: sys-utils/setpriv.c:119
+#, fuzzy, c-format
+msgid " %s [options] <program> [<argument>...]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/setpriv.c:123
+msgid "Run a program with different privilege settings.\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:126
+#, fuzzy
+msgid " -d, --dump show current state (and do not exec)\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/setpriv.c:127
+msgid " --nnp, --no-new-privs disallow granting new privileges\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:128
+msgid " --ambient-caps <caps,...> set ambient capabilities\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:129
+msgid " --inh-caps <caps,...> set inheritable capabilities\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:130
+msgid " --bounding-set <caps> set capability bounding set\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:131
+#, fuzzy
+msgid " --ruid <uid|user> set real uid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:132
+#, fuzzy
+msgid " --euid <uid|user> set effective uid\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/setpriv.c:133
+#, fuzzy
+msgid " --rgid <gid|user> set real gid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:134
+#, fuzzy
+msgid " --egid <gid|group> set effective gid\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/setpriv.c:135
+#, fuzzy
+msgid " --reuid <uid|user> set real and effective uid\n"
+msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
+
+#: sys-utils/setpriv.c:136
+#, fuzzy
+msgid " --regid <gid|group> set real and effective gid\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:137
+#, fuzzy
+msgid " --clear-groups clear supplementary groups\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:138
+#, fuzzy
+msgid " --keep-groups keep supplementary groups\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:139
+#, fuzzy
+msgid " --init-groups initialize supplementary groups\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:140
+#, fuzzy
+msgid " --groups <group,...> set supplementary groups by UID or name\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/setpriv.c:141
+#, fuzzy
+msgid " --securebits <bits> set securebits\n"
+msgstr " -7, --sevenbits 設定字元大小到 7 位元\n"
+
+#: sys-utils/setpriv.c:142
+#, fuzzy
+msgid ""
+" --pdeathsig keep|clear|<signame>\n"
+" set or clear parent death signal\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: sys-utils/setpriv.c:144
+#, fuzzy
+msgid " --selinux-label <label> set SELinux label\n"
+msgstr " -o, --office <office> 辦公室數字\n"
+
+#: sys-utils/setpriv.c:145
+msgid " --apparmor-profile <pr> set AppArmor profile\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:146
+msgid ""
+" --reset-env clear all environment and initialize\n"
+" HOME, SHELL, USER, LOGNAME and PATH\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:152
+msgid " This tool can be dangerous. Read the manpage, and be careful.\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:170
+#, fuzzy
+msgid "invalid capability type"
+msgstr "無效的分割區類型『%c』\n"
+
+#: sys-utils/setpriv.c:193 sys-utils/setpriv.c:412
+#, c-format
+msgid "cap %d: libcap-ng is broken"
+msgstr ""
+
+#: sys-utils/setpriv.c:219 sys-utils/setpriv.c:560
+msgid "getting process secure bits failed"
+msgstr ""
+
+#: sys-utils/setpriv.c:223
+#, c-format
+msgid "Securebits: "
+msgstr ""
+
+#: sys-utils/setpriv.c:243 sys-utils/setpriv.c:327
+#, fuzzy, c-format
+msgid "[none]\n"
+msgstr "無"
+
+#: sys-utils/setpriv.c:269
+#, fuzzy, c-format
+msgid "%s: too long"
+msgstr "列太長"
+
+#: sys-utils/setpriv.c:297
+#, c-format
+msgid "Supplementary groups: "
+msgstr ""
+
+#: sys-utils/setpriv.c:299 sys-utils/setpriv.c:365 sys-utils/setpriv.c:370
+#: sys-utils/setpriv.c:376 sys-utils/setpriv.c:382 sys-utils/setpriv.c:389
+#, fuzzy, c-format
+msgid "[none]"
+msgstr "無"
+
+#: sys-utils/setpriv.c:317
+#, fuzzy
+msgid "get pdeathsig failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:321
+#, fuzzy, c-format
+msgid "Parent death signal: "
+msgstr "設定 rtc 喚醒警示失敗"
+
+#: sys-utils/setpriv.c:337
+#, c-format
+msgid "uid: %u\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:338
+#, c-format
+msgid "euid: %u\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:341
+#, c-format
+msgid "suid: %u\n"
+msgstr ""
+
+#: sys-utils/setpriv.c:343 sys-utils/setpriv.c:456
+#, fuzzy
+msgid "getresuid failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:352 sys-utils/setpriv.c:471
+#, fuzzy
+msgid "getresgid failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/setpriv.c:363
+#, c-format
+msgid "Effective capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:368
+#, c-format
+msgid "Permitted capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:374
+#, c-format
+msgid "Inheritable capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:379
+#, c-format
+msgid "Ambient capabilities: "
+msgstr ""
+
+#: sys-utils/setpriv.c:384
+#, fuzzy, c-format
+msgid "[unsupported]"
+msgstr "不受支援的命令"
+
+#: sys-utils/setpriv.c:387
+#, c-format
+msgid "Capability bounding set: "
+msgstr ""
+
+#: sys-utils/setpriv.c:396
+#, fuzzy
+msgid "SELinux label"
+msgstr "Linux 純文字"
+
+#: sys-utils/setpriv.c:399
+msgid "AppArmor profile"
+msgstr ""
+
+#: sys-utils/setpriv.c:434
+msgid "Invalid supplementary group id"
+msgstr ""
+
+#: sys-utils/setpriv.c:444
+#, fuzzy
+msgid "failed to get parent death signal"
+msgstr "剖析掛載表時失敗"
+
+#: sys-utils/setpriv.c:464
+#, fuzzy
+msgid "setresuid failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:479
+#, fuzzy
+msgid "setresgid failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/setpriv.c:511
+#, fuzzy
+msgid "unsupported capability type"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/setpriv.c:528
+msgid "bad capability string"
+msgstr ""
+
+#: sys-utils/setpriv.c:545
+#, fuzzy, c-format
+msgid "unknown capability \"%s\""
+msgstr "不明機能『%s』"
+
+#: sys-utils/setpriv.c:569
+#, fuzzy
+msgid "unrecognized securebit set -- refusing to adjust"
+msgstr "無法辨識的格式 - 使用磁區數\n"
+
+#: sys-utils/setpriv.c:573
+msgid "bad securebits string"
+msgstr ""
+
+#: sys-utils/setpriv.c:580
+#, fuzzy
+msgid "+all securebits is not allowed"
+msgstr "『%c』未被允許"
+
+#: sys-utils/setpriv.c:593
+#, fuzzy
+msgid "adjusting keep_caps does not make sense"
+msgstr "指定的範圍<%d:%d>不具任何意義"
+
+#: sys-utils/setpriv.c:597
+#, fuzzy
+msgid "unrecognized securebit"
+msgstr "無法辨識的輸入：%s"
+
+#: sys-utils/setpriv.c:617
+msgid "SELinux is not running"
+msgstr ""
+
+#: sys-utils/setpriv.c:632
+#, fuzzy, c-format
+msgid "close failed: %s"
+msgstr "搜尋失敗"
+
+#: sys-utils/setpriv.c:640
+msgid "AppArmor is not running"
+msgstr ""
+
+#: sys-utils/setpriv.c:819
+msgid "duplicate --no-new-privs option"
+msgstr ""
+
+#: sys-utils/setpriv.c:824
+msgid "duplicate ruid"
+msgstr ""
+
+#: sys-utils/setpriv.c:826
+#, fuzzy
+msgid "failed to parse ruid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:834
+msgid "duplicate euid"
+msgstr ""
+
+#: sys-utils/setpriv.c:836
+#, fuzzy
+msgid "failed to parse euid"
+msgstr "剖析結束時失敗"
+
+#: sys-utils/setpriv.c:840
+msgid "duplicate ruid or euid"
+msgstr ""
+
+#: sys-utils/setpriv.c:842
+#, fuzzy
+msgid "failed to parse reuid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:851
+msgid "duplicate rgid"
+msgstr ""
+
+#: sys-utils/setpriv.c:853
+#, fuzzy
+msgid "failed to parse rgid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:857
+msgid "duplicate egid"
+msgstr ""
+
+#: sys-utils/setpriv.c:859
+#, fuzzy
+msgid "failed to parse egid"
+msgstr "剖析結束時失敗"
+
+#: sys-utils/setpriv.c:863
+msgid "duplicate rgid or egid"
+msgstr ""
+
+#: sys-utils/setpriv.c:865
+#, fuzzy
+msgid "failed to parse regid"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/setpriv.c:870
+msgid "duplicate --clear-groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:876
+msgid "duplicate --keep-groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:882
+msgid "duplicate --init-groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:888
+msgid "duplicate --groups option"
+msgstr ""
+
+#: sys-utils/setpriv.c:894
+msgid "duplicate --keep-pdeathsig option"
+msgstr ""
+
+#: sys-utils/setpriv.c:903
+msgid "duplicate --inh-caps option"
+msgstr ""
+
+#: sys-utils/setpriv.c:909
+msgid "duplicate --ambient-caps option"
+msgstr ""
+
+#: sys-utils/setpriv.c:915
+msgid "duplicate --bounding-set option"
+msgstr ""
+
+#: sys-utils/setpriv.c:921
+msgid "duplicate --securebits option"
+msgstr ""
+
+#: sys-utils/setpriv.c:927
+msgid "duplicate --selinux-label option"
+msgstr ""
+
+#: sys-utils/setpriv.c:933
+msgid "duplicate --apparmor-profile option"
+msgstr ""
+
+#: sys-utils/setpriv.c:952
+msgid "--dump is incompatible with all other options"
+msgstr ""
+
+#: sys-utils/setpriv.c:960
+#, fuzzy
+msgid "--list-caps must be specified alone"
+msgstr "選項 --pid 也許會被指定的只一次"
+
+#: sys-utils/setpriv.c:966
+#, fuzzy
+msgid "No program specified"
+msgstr "未指定任何檔名"
+
+#: sys-utils/setpriv.c:972
+msgid "--[re]gid requires --keep-groups, --clear-groups, --init-groups, or --groups"
+msgstr ""
+
+#: sys-utils/setpriv.c:976
+msgid "--init-groups requires --ruid or --reuid"
+msgstr ""
+
+#: sys-utils/setpriv.c:980
+#, c-format
+msgid "uid %ld not found, --init-groups requires an user that can be found on the system"
+msgstr ""
+
+#: sys-utils/setpriv.c:995
+msgid "disallow granting new privileges failed"
+msgstr ""
+
+#: sys-utils/setpriv.c:1003
+msgid "keep process capabilities failed"
+msgstr ""
+
+#: sys-utils/setpriv.c:1011
+msgid "activate capabilities"
+msgstr ""
+
+#: sys-utils/setpriv.c:1017
+msgid "reactivate capabilities"
+msgstr ""
+
+#: sys-utils/setpriv.c:1028
+#, fuzzy
+msgid "initgroups failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/setpriv.c:1036
+#, fuzzy
+msgid "set process securebits failed"
+msgstr "setuid 失敗"
+
+#: sys-utils/setpriv.c:1042
+msgid "apply bounding set"
+msgstr ""
+
+#: sys-utils/setpriv.c:1048
+msgid "apply capabilities"
+msgstr ""
+
+#: sys-utils/setpriv.c:1057
+#, fuzzy
+msgid "set parent death signal failed"
+msgstr "設定 rtc 喚醒警示失敗"
+
+#: sys-utils/setsid.c:33
+#, fuzzy, c-format
+msgid " %s [options] <program> [arguments ...]\n"
+msgstr " %s [選項] <program> [引數...]\n"
+
+#: sys-utils/setsid.c:37
+msgid "Run a program in a new session.\n"
+msgstr ""
+
+#: sys-utils/setsid.c:40
+#, fuzzy
+msgid " -c, --ctty set the controlling terminal to the current one\n"
+msgstr " -c, --ctty 設定控制終端機到目前的一個\n"
+
+#: sys-utils/setsid.c:41
+#, fuzzy
+msgid " -f, --fork always fork\n"
+msgstr " -f 強制檢查\n"
+
+#: sys-utils/setsid.c:42
+msgid " -w, --wait wait program to exit, and use the same return\n"
+msgstr ""
+
+#: sys-utils/setsid.c:100
+#, fuzzy
+msgid "fork"
+msgstr "衍生"
+
+#: sys-utils/setsid.c:112
+#, fuzzy, c-format
+msgid "child %d did not exit normally"
+msgstr "卸載的『%s』並未正常離開"
+
+#: sys-utils/setsid.c:117
+#, fuzzy
+msgid "setsid failed"
+msgstr "setsid 失敗"
+
+#: sys-utils/setsid.c:120
+#, fuzzy
+msgid "failed to set the controlling terminal"
+msgstr "設定控制終端機時失敗"
+
+#: sys-utils/swapoff.c:94
+#, fuzzy, c-format
+msgid "swapoff %s\n"
+msgstr "swapoff %s\n"
+
+#: sys-utils/swapoff.c:114
+msgid "Not superuser."
+msgstr "並非系統管理者。"
+
+#: sys-utils/swapoff.c:117 sys-utils/swapoff.c:122
+#, c-format
+msgid "%s: swapoff failed"
+msgstr "%s：swapoff 失敗"
+
+#: sys-utils/swapoff.c:141 sys-utils/swapon.c:807
+#, fuzzy, c-format
+msgid " %s [options] [<spec>]\n"
+msgstr " %s [選項] [<spec>]\n"
+
+#: sys-utils/swapoff.c:144
+msgid "Disable devices and files for paging and swapping.\n"
+msgstr ""
+
+#: sys-utils/swapoff.c:147
+#, fuzzy
+msgid ""
+" -a, --all disable all swaps from /proc/swaps\n"
+" -v, --verbose verbose mode\n"
+msgstr ""
+" -a, --all 全部停用交換從/proc/交換\n"
+" -v, --verbose 詳細模式\n"
+
+#: sys-utils/swapoff.c:153
+#, fuzzy
+msgid ""
+"\n"
+"The <spec> parameter:\n"
+" -L <label> LABEL of device to be used\n"
+" -U <uuid> UUID of device to be used\n"
+" LABEL=<label> LABEL of device to be used\n"
+" UUID=<uuid> UUID of device to be used\n"
+" <device> name of device to be used\n"
+" <file> name of file to be used\n"
+msgstr ""
+"\n"
+"<spec> 參數：\n"
+" -L<標貼> 標貼的裝置為使用\n"
+" -U<uuid> UUID 的裝置為使用\n"
+" 標貼=<標貼> 標貼的裝置為使用\n"
+" UUID=<uuid> UUID 的裝置為使用\n"
+"<裝置> 名稱的裝置為使用\n"
+"<檔案> 名稱的檔案為使用\n"
+
+#: sys-utils/swapon.c:96
+#, fuzzy
+msgid "device file or partition path"
+msgstr "裝置檔案或分割路徑"
+
+#: sys-utils/swapon.c:97
+#, fuzzy
+msgid "type of the device"
+msgstr "型態的裝置"
+
+#: sys-utils/swapon.c:98
+#, fuzzy
+msgid "size of the swap area"
+msgstr "大小的交換區域"
+
+#: sys-utils/swapon.c:99
+#, fuzzy
+msgid "bytes in use"
+msgstr "位元組在中使用"
+
+#: sys-utils/swapon.c:100
+#, fuzzy
+msgid "swap priority"
+msgstr "交換優先權"
+
+#: sys-utils/swapon.c:101
+msgid "swap uuid"
+msgstr ""
+
+#: sys-utils/swapon.c:102
+#, fuzzy
+msgid "swap label"
+msgstr "無標籤，"
+
+#. TRANSLATORS: The tabs make each field a multiple of 8 characters. Keep aligned with each entry below.
+#: sys-utils/swapon.c:250
+#, fuzzy, c-format
+msgid "Filename\t\t\t\tType\t\tSize\t\tUsed\t\tPriority\n"
+msgstr "%s\t\t\t\t型態\t\t大小\t使用\t優先權\n"
+
+#: sys-utils/swapon.c:328
+#, c-format
+msgid "%s: reinitializing the swap."
+msgstr "%s：重新初始化交換區。"
+
+#: sys-utils/swapon.c:387
+#, c-format
+msgid "%s: lseek failed"
+msgstr "%s：lseek 失敗"
+
+#: sys-utils/swapon.c:393
+#, c-format
+msgid "%s: write signature failed"
+msgstr "%s：寫入簽章時失敗"
+
+#: sys-utils/swapon.c:536
+#, c-format
+msgid "%s: insecure permissions %04o, %04o suggested."
+msgstr "%s：不安全的權限 %04o, 建議使用 %04o。"
+
+#: sys-utils/swapon.c:541
+#, fuzzy, c-format
+msgid "%s: insecure file owner %d, 0 (root) suggested."
+msgstr "%s：不安全檔案擁有者 %d，0 (根) 建議。"
+
+#: sys-utils/swapon.c:547
+#, c-format
+msgid "%s: skipping - it appears to have holes."
+msgstr "%s：跳過 - 看來似乎有漏洞。"
+
+#: sys-utils/swapon.c:555
+#, c-format
+msgid "%s: get size failed"
+msgstr "%s：取得大小時失敗"
+
+#: sys-utils/swapon.c:561
+#, c-format
+msgid "%s: read swap header failed"
+msgstr "%s：讀取交換區頁首失敗"
+
+#: sys-utils/swapon.c:566
+#, fuzzy, c-format
+msgid "%s: found signature [pagesize=%d, signature=%s]"
+msgstr "%s：找到交換區簽章：版本 %d，頁面大小 %d，%s 位元組序"
+
+#: sys-utils/swapon.c:577
+#, c-format
+msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
+msgstr "%s：pagesize=%d，swapsize=%llu，devsize=%llu"
+
+#: sys-utils/swapon.c:582
+#, c-format
+msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
+msgstr "%s：last_page 0x%08llx 大於實際的交換區空間大小"
+
+#: sys-utils/swapon.c:592
+#, c-format
+msgid "%s: swap format pagesize does not match."
+msgstr "%s：交換區格式頁面大小不吻合。"
+
+#: sys-utils/swapon.c:598
+#, c-format
+msgid "%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
+msgstr "%s：交換區格式頁面大小不吻合。(使用 --fixpgsz 以重新初始它。)"
+
+#: sys-utils/swapon.c:607
+#, c-format
+msgid "%s: software suspend data detected. Rewriting the swap signature."
+msgstr "%s：偵測到軟體懸置資料。重新寫入交換區簽章。"
+
+#: sys-utils/swapon.c:677
+#, fuzzy, c-format
+msgid "swapon %s\n"
+msgstr "swapon %s\n"
+
+#: sys-utils/swapon.c:681
+#, c-format
+msgid "%s: swapon failed"
+msgstr "%s：swapon 失敗"
+
+#: sys-utils/swapon.c:760
+#, fuzzy, c-format
+msgid "%s: noauto option -- ignored"
+msgstr "%s：剖析錯誤於列 %d -- 忽略"
+
+#: sys-utils/swapon.c:782
+#, fuzzy, c-format
+msgid "%s: already active -- ignored"
+msgstr "%s：剖析錯誤於列 %d -- 忽略"
+
+#: sys-utils/swapon.c:788
+#, fuzzy, c-format
+msgid "%s: inaccessible -- ignored"
+msgstr "%s：無法寫入 inodes"
+
+#: sys-utils/swapon.c:810
+msgid "Enable devices and files for paging and swapping.\n"
+msgstr ""
+
+#: sys-utils/swapon.c:813
+#, fuzzy
+msgid " -a, --all enable all swaps from /etc/fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/swapon.c:814
+msgid " -d, --discard[=<policy>] enable swap discards, if supported by device\n"
+msgstr ""
+
+#: sys-utils/swapon.c:815
+msgid " -e, --ifexists silently skip devices that do not exist\n"
+msgstr ""
+
+#: sys-utils/swapon.c:816
+msgid " -f, --fixpgsz reinitialize the swap space if necessary\n"
+msgstr ""
+
+#: sys-utils/swapon.c:817
+msgid " -o, --options <list> comma-separated list of swap options\n"
+msgstr ""
+
+#: sys-utils/swapon.c:818
+#, fuzzy
+msgid " -p, --priority <prio> specify the priority of the swap device\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/swapon.c:819
+msgid " -s, --summary display summary about used swap devices (DEPRECATED)\n"
+msgstr ""
+
+#: sys-utils/swapon.c:820
+#, fuzzy
+msgid " -T, --fstab <path> alternative file to /etc/fstab\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/swapon.c:821
+msgid " --show[=<columns>] display summary in definable table\n"
+msgstr ""
+
+#: sys-utils/swapon.c:822
+#, fuzzy
+msgid " --noheadings don't print table heading (with --show)\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/swapon.c:823
+#, fuzzy
+msgid " --raw use the raw output format (with --show)\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/swapon.c:824
+#, fuzzy
+msgid " --bytes display swap size in bytes in --show output\n"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: sys-utils/swapon.c:825
+#, fuzzy
+msgid " -v, --verbose verbose mode\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: sys-utils/swapon.c:830
+#, fuzzy
+msgid ""
+"\n"
+"The <spec> parameter:\n"
+" -L <label> synonym for LABEL=<label>\n"
+" -U <uuid> synonym for UUID=<uuid>\n"
+" LABEL=<label> specifies device by swap area label\n"
+" UUID=<uuid> specifies device by swap area UUID\n"
+" PARTLABEL=<label> specifies device by partition label\n"
+" PARTUUID=<uuid> specifies device by partition UUID\n"
+" <device> name of device to be used\n"
+" <file> name of file to be used\n"
+msgstr ""
+"\n"
+"<spec> 參數：\n"
+" -L<標貼> 同義字用於標貼=<標貼>\n"
+" -U<uuid> 同義字用於 UUID=<uuid>\n"
+" 標貼=<標貼> 指定裝置由交換區域標貼\n"
+" UUID=<uuid> 指定裝置由交換區域 UUID\n"
+" PARTLABEL=<標貼> 指定裝置由分割標貼\n"
+" PARTUUID=<uuid> 指定裝置由分割 UUID\n"
+"<裝置> 名稱的裝置為使用\n"
+"<檔案> 名稱的檔案為使用\n"
+
+#: sys-utils/swapon.c:840
+msgid ""
+"\n"
+"Available discard policy types (for --discard):\n"
+" once : only single-time area discards are issued\n"
+" pages : freed pages are discarded before they are reused\n"
+"If no policy is selected, both discard types are enabled (default).\n"
+msgstr ""
+
+#: sys-utils/swapon.c:923
+#, fuzzy
+msgid "failed to parse priority"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/swapon.c:945
+#, fuzzy, c-format
+msgid "unsupported discard policy: %s"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/swapon-common.c:73
+#, c-format
+msgid "cannot find the device for %s"
+msgstr "找不到做為 %s 的裝置"
+
+#: sys-utils/switch_root.c:60
+#, fuzzy
+msgid "failed to open directory"
+msgstr "開啟目錄時失敗"
+
+#: sys-utils/switch_root.c:67
+#, fuzzy
+msgid "stat failed"
+msgstr "stat 失敗"
+
+#: sys-utils/switch_root.c:78
+#, fuzzy
+msgid "failed to read directory"
+msgstr "讀取目錄時失敗"
+
+#: sys-utils/switch_root.c:113
+#, fuzzy, c-format
+msgid "failed to unlink %s"
+msgstr "取消連結 %s 時失敗"
+
+#: sys-utils/switch_root.c:160
+#, fuzzy, c-format
+msgid "failed to mount moving %s to %s"
+msgstr "掛載移動 %s 到 %s 時失敗"
+
+#: sys-utils/switch_root.c:162
+#, fuzzy, c-format
+msgid "forcing unmount of %s"
+msgstr "強制卸載的 %s"
+
+#: sys-utils/switch_root.c:168
+#, fuzzy, c-format
+msgid "failed to change directory to %s"
+msgstr "變更目錄到 %s 時失敗"
+
+#: sys-utils/switch_root.c:179
+#, fuzzy, c-format
+msgid "failed to mount moving %s to /"
+msgstr "掛載移動 %s 到時失敗/"
+
+#: sys-utils/switch_root.c:184
+#, fuzzy
+msgid "failed to change root"
+msgstr "變更根時失敗"
+
+#: sys-utils/switch_root.c:203
+msgid "old root filesystem is not an initramfs"
+msgstr ""
+
+#: sys-utils/switch_root.c:226
+#, fuzzy, c-format
+msgid " %s [options] <newrootdir> <init> <args to init>\n"
+msgstr " %s [選項] <newrootdir><init><引數到 init>\n"
+
+#: sys-utils/switch_root.c:230
+msgid "Switch to another filesystem as the root of the mount tree.\n"
+msgstr ""
+
+#: sys-utils/switch_root.c:275
+#, fuzzy
+msgid "failed. Sorry."
+msgstr "失敗。抱歉。"
+
+#: sys-utils/switch_root.c:278
+#, fuzzy, c-format
+msgid "cannot access %s"
+msgstr "無法存取 %s"
+
+#: sys-utils/tunelp.c:98
+msgid "Set various parameters for the line printer.\n"
+msgstr ""
+
+#: sys-utils/tunelp.c:101
+#, fuzzy
+msgid " -i, --irq <num> specify parallel port irq\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: sys-utils/tunelp.c:102
+#, fuzzy
+msgid " -t, --time <ms> driver wait time in milliseconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+
+#: sys-utils/tunelp.c:103
+#, fuzzy
+msgid " -c, --chars <num> number of output characters before sleep\n"
+msgstr " -c, --chars <num> 輸出字元數的之前暫停\n"
+
+#: sys-utils/tunelp.c:104
+#, fuzzy
+msgid " -w, --wait <us> strobe wait in micro seconds\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+
+#. TRANSLATORS: do not translate <on|off> arguments. The
+#. argument reader does not recognize locale, unless `on' is
+#. exactly that very same string.
+#: sys-utils/tunelp.c:108
+#, fuzzy
+msgid " -a, --abort <on|off> abort on error\n"
+msgstr " -a, --abort <on|off> 放棄於錯誤\n"
+
+#: sys-utils/tunelp.c:109
+#, fuzzy
+msgid " -o, --check-status <on|off> check printer status before printing\n"
+msgstr " -o, --check-status <on|off> 檢查印表機狀態之前列印\n"
+
+#: sys-utils/tunelp.c:110
+#, fuzzy
+msgid " -C, --careful <on|off> extra checking to status check\n"
+msgstr " -C, --careful <on|off> 額外檢查到狀態檢查\n"
+
+#: sys-utils/tunelp.c:111
+#, fuzzy
+msgid " -s, --status query printer status\n"
+msgstr " -s, --status 查詢印表機狀態\n"
+
+#: sys-utils/tunelp.c:112
+#, fuzzy
+msgid " -r, --reset reset the port\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/tunelp.c:113
+#, fuzzy
+msgid " -q, --print-irq <on|off> display current irq setting\n"
+msgstr " -q, --print-irq <on|off> 顯示目前的 irq 設定\n"
+
+#: sys-utils/tunelp.c:258
+#, fuzzy, c-format
+msgid "%s not an lp device"
+msgstr "%s 不是 lp 裝置"
+
+#: sys-utils/tunelp.c:277
+msgid "LPGETSTATUS error"
+msgstr "LPGETSTATUS 錯誤"
+
+#: sys-utils/tunelp.c:282
+#, c-format
+msgid "%s status is %d"
+msgstr "%s 狀態為 %d"
+
+#: sys-utils/tunelp.c:284
+#, c-format
+msgid ", busy"
+msgstr "，忙碌中"
+
+#: sys-utils/tunelp.c:286
+#, c-format
+msgid ", ready"
+msgstr "，就緒"
+
+#: sys-utils/tunelp.c:288
+#, c-format
+msgid ", out of paper"
+msgstr "，紙張耗盡"
+
+#: sys-utils/tunelp.c:290
+#, c-format
+msgid ", on-line"
+msgstr "，上線"
+
+#: sys-utils/tunelp.c:292
+#, c-format
+msgid ", error"
+msgstr "，錯誤"
+
+#: sys-utils/tunelp.c:296
+#, fuzzy
+msgid "ioctl failed"
+msgstr "ioctl 失敗"
+
+#: sys-utils/tunelp.c:306
+msgid "LPGETIRQ error"
+msgstr "LPGETIRQ 錯誤"
+
+#: sys-utils/tunelp.c:311
+#, c-format
+msgid "%s using IRQ %d\n"
+msgstr "%s 正在使用 IRQ %d\n"
+
+#: sys-utils/tunelp.c:313
+#, c-format
+msgid "%s using polling\n"
+msgstr "%s 正在使用輪詢\n"
+
+#: sys-utils/umount.c:82
+#, fuzzy, c-format
+msgid ""
+" %1$s [-hV]\n"
+" %1$s -a [options]\n"
+" %1$s [options] <source> | <directory>\n"
+msgstr ""
+" %1$s [-hV]\n"
+" %1$s -a [選項]\n"
+" %1$s [選項] <source>|<目錄>\n"
+
+#: sys-utils/umount.c:88
+#, fuzzy
+msgid "Unmount filesystems.\n"
+msgstr "檔案系統型態"
+
+#: sys-utils/umount.c:91
+#, fuzzy
+msgid " -a, --all unmount all filesystems\n"
+msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#: sys-utils/umount.c:92
+msgid ""
+" -A, --all-targets unmount all mountpoints for the given device in the\n"
+" current namespace\n"
+msgstr ""
+
+#: sys-utils/umount.c:95
+msgid " -d, --detach-loop if mounted loop device, also free this loop device\n"
+msgstr ""
+
+#: sys-utils/umount.c:96
+msgid " --fake dry run; skip the umount(2) syscall\n"
+msgstr ""
+
+#: sys-utils/umount.c:97
+msgid " -f, --force force unmount (in case of an unreachable NFS system)\n"
+msgstr ""
+
+#: sys-utils/umount.c:98
+msgid " -i, --internal-only don't call the umount.<type> helpers\n"
+msgstr ""
+
+#: sys-utils/umount.c:100
+#, fuzzy
+msgid " -l, --lazy detach the filesystem now, clean up things later\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: sys-utils/umount.c:102
+msgid " -R, --recursive recursively unmount a target with all its children\n"
+msgstr ""
+
+#: sys-utils/umount.c:103
+#, fuzzy
+msgid " -r, --read-only in case unmounting fails, try to remount read-only\n"
+msgstr " -s --shared 提取共享的鎖定\n"
+
+#: sys-utils/umount.c:106
+#, fuzzy
+msgid " -q, --quiet suppress 'not mounted' error messages\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: sys-utils/umount.c:107
+#, fuzzy
+msgid " -N, --namespace <ns> perform umount in another namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/umount.c:152
+#, fuzzy, c-format
+msgid "%s (%s) unmounted"
+msgstr "%s 被掛載\n"
+
+#: sys-utils/umount.c:154
+#, fuzzy, c-format
+msgid "%s unmounted"
+msgstr "%s：無法掛載"
+
+#: sys-utils/umount.c:232
+#, fuzzy
+msgid "failed to set umount target"
+msgstr "設定 umount 目標時失敗"
+
+#: sys-utils/umount.c:265
+#, fuzzy
+msgid "libmount table allocation failed"
+msgstr "libmount 語境配額失敗"
+
+#: sys-utils/umount.c:311 sys-utils/umount.c:403
+#, fuzzy
+msgid "libmount iterator allocation failed"
+msgstr "libmount 語境配額失敗"
+
+#: sys-utils/umount.c:324
+#, fuzzy, c-format
+msgid "failed to get child fs of %s"
+msgstr "提取舊的 %s 限制時失敗"
+
+#: sys-utils/umount.c:366 sys-utils/umount.c:390
+#, fuzzy, c-format
+msgid "%s: not found"
+msgstr "%s：找不到"
+
+#: sys-utils/umount.c:397
+#, c-format
+msgid "%s: failed to determine source (--all-targets is unsupported on systems with regular mtab file)."
+msgstr ""
+
+#: sys-utils/unshare.c:98
+#, fuzzy, c-format
+msgid "unsupported --setgroups argument '%s'"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/unshare.c:119 sys-utils/unshare.c:134
+#, fuzzy, c-format
+msgid "write failed %s"
+msgstr "寫入失敗：%s"
+
+#: sys-utils/unshare.c:157
+#, fuzzy, c-format
+msgid "unsupported propagation mode: %s"
+msgstr "不受支援的引數：%s"
+
+#: sys-utils/unshare.c:166
+#, fuzzy
+msgid "cannot change root filesystem propagation"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/unshare.c:197
+#, fuzzy, c-format
+msgid "mount %s on %s failed"
+msgstr "掛載 %s 於 %s 失敗"
+
+#: sys-utils/unshare.c:224
+#, fuzzy
+msgid "failed to open /proc/self/timens_offsets"
+msgstr "剖析偏移時失敗"
+
+#: sys-utils/unshare.c:227
+#, fuzzy
+msgid "failed to write to /proc/self/timens_offsets"
+msgstr "剖析偏移時失敗"
+
+#: sys-utils/unshare.c:294
+#, fuzzy
+msgid "eventfd failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/unshare.c:304
+#, fuzzy
+msgid "failed to read eventfd"
+msgstr "讀取速度時失敗"
+
+#: sys-utils/unshare.c:402
+#, fuzzy, c-format
+msgid "invalid mapping '%s'"
+msgstr "無效的識別號：%s"
+
+#: sys-utils/unshare.c:430
+#, fuzzy, c-format
+#| msgid "Could not open %s\n"
+msgid "could not open '%s'"
+msgstr "無法開啟 %s\n"
+
+#: sys-utils/unshare.c:455 sys-utils/unshare.c:461
+#, fuzzy
+msgid "failed to parse subid map"
+msgstr "剖析 pid 時失敗"
+
+#: sys-utils/unshare.c:470
+#, c-format
+msgid "no line matching user \"%s\" in %s"
+msgstr ""
+
+#: sys-utils/unshare.c:647
+msgid "Run a program with some namespaces unshared from the parent.\n"
+msgstr ""
+
+#: sys-utils/unshare.c:650
+#, fuzzy
+msgid " -m, --mount[=<file>] unshare mounts namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:651
+#, fuzzy
+msgid " -u, --uts[=<file>] unshare UTS namespace (hostname etc)\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:652
+#, fuzzy
+msgid " -i, --ipc[=<file>] unshare System V IPC namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:653
+#, fuzzy
+msgid " -n, --net[=<file>] unshare network namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:654
+#, fuzzy
+msgid " -p, --pid[=<file>] unshare pid namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:655
+#, fuzzy
+msgid " -U, --user[=<file>] unshare user namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:656
+#, fuzzy
+msgid " -C, --cgroup[=<file>] unshare cgroup namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:657
+#, fuzzy
+msgid " -T, --time[=<file>] unshare time namespace\n"
+msgstr " -s, --speed <value> 設定序列線路速度\n"
+
+#: sys-utils/unshare.c:659
+#, fuzzy
+msgid " -f, --fork fork before launching <program>\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: sys-utils/unshare.c:660
+msgid " --map-user=<uid>|<name> map current user to uid (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:661
+msgid " --map-group=<gid>|<name> map current group to gid (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:662
+msgid " -r, --map-root-user map current user to root (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:663
+msgid " -c, --map-current-user map current user to itself (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:664
+#, fuzzy
+msgid " --map-auto map users and groups automatically (implies --user)\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/unshare.c:665
+msgid ""
+" --map-users=<inneruid>:<outeruid>:<count>\n"
+" map count users from outeruid to inneruid (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:667
+msgid ""
+" --map-groups=<innergid>:<outergid>:<count>\n"
+" map count groups from outergid to innergid (implies --user)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:670
+msgid ""
+" --kill-child[=<signame>] when dying, kill the forked child (implies --fork)\n"
+" defaults to SIGKILL\n"
+msgstr ""
+
+#: sys-utils/unshare.c:672
+msgid " --mount-proc[=<dir>] mount proc filesystem first (implies --mount)\n"
+msgstr ""
+
+#: sys-utils/unshare.c:673
+msgid ""
+" --propagation slave|shared|private|unchanged\n"
+" modify mount propagation in mount namespace\n"
+msgstr ""
+
+#: sys-utils/unshare.c:675
+msgid " --setgroups allow|deny control the setgroups syscall in user namespaces\n"
+msgstr ""
+
+#: sys-utils/unshare.c:676
+#, fuzzy
+msgid " --keep-caps retain capabilities granted in user namespaces\n"
+msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#: sys-utils/unshare.c:678
+#, fuzzy
+msgid " -R, --root=<dir> run the command with root directory set to <dir>\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/unshare.c:679
+#, fuzzy
+msgid " -w, --wd=<dir> change working directory to <dir>\n"
+msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#: sys-utils/unshare.c:680
+#, fuzzy
+msgid " -S, --setuid <uid> set uid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/unshare.c:681
+#, fuzzy
+msgid " -G, --setgid <gid> set gid in entered namespace\n"
+msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#: sys-utils/unshare.c:682
+msgid " --monotonic <offset> set clock monotonic offset (seconds) in time namespaces\n"
+msgstr ""
+
+#: sys-utils/unshare.c:683
+msgid " --boottime <offset> set clock boottime offset (seconds) in time namespaces\n"
+msgstr ""
+
+#: sys-utils/unshare.c:898
+#, fuzzy
+msgid "failed to parse monotonic offset"
+msgstr "剖析偏移時失敗"
+
+#: sys-utils/unshare.c:902
+#, fuzzy
+msgid "failed to parse boottime offset"
+msgstr "剖析偏移時失敗"
+
+#: sys-utils/unshare.c:916
+msgid "options --monotonic and --boottime require unsharing of a time namespace (-t)"
+msgstr ""
+
+#: sys-utils/unshare.c:930
+msgid "unshare failed"
+msgstr "unshare 失敗"
+
+#: sys-utils/unshare.c:947
+#, fuzzy
+msgid "sigprocmask block failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/unshare.c:953
+#, fuzzy
+msgid "pidfd_open failed"
+msgstr "開啟失敗：%s"
+
+#: sys-utils/unshare.c:966
+#, fuzzy
+msgid "sigprocmask restore failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/unshare.c:1002
+#, fuzzy
+msgid "sigprocmask unblock failed"
+msgstr "strdup 失敗"
+
+#: sys-utils/unshare.c:1006
+#, fuzzy
+msgid "child exit failed"
+msgstr "識別號失敗"
+
+#: sys-utils/unshare.c:1045
+#, fuzzy
+msgid "options --setgroups=allow and --map-group are mutually exclusive"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/unshare.c:1060
+#, fuzzy, c-format
+msgid "cannot change root directory to '%s'"
+msgstr "無法變更目錄到 %s"
+
+#: sys-utils/unshare.c:1064
+#, fuzzy, c-format
+msgid "cannot chdir to '%s'"
+msgstr "無法變更目錄到 %s"
+
+#: sys-utils/unshare.c:1076
+#, fuzzy, c-format
+msgid "cannot change %s filesystem propagation"
+msgstr "檢查所有檔案系統。\n"
+
+#: sys-utils/unshare.c:1080
+#, fuzzy, c-format
+msgid "mount %s failed"
+msgstr "掛載失敗"
+
+#: sys-utils/unshare.c:1105
+#, fuzzy
+msgid "capget failed"
+msgstr "寫入失敗"
+
+#: sys-utils/unshare.c:1113
+#, fuzzy
+msgid "capset failed"
+msgstr "setgid 失敗"
+
+#: sys-utils/unshare.c:1125
+msgid "prctl(PR_CAP_AMBIENT) failed"
+msgstr ""
+
+#: sys-utils/wdctl.c:73
+#, fuzzy
+msgid "Card previously reset the CPU"
+msgstr "卡在之前重置 CPU"
+
+#: sys-utils/wdctl.c:74
+#, fuzzy
+msgid "External relay 1"
+msgstr "外部中繼 1"
+
+#: sys-utils/wdctl.c:75
+#, fuzzy
+msgid "External relay 2"
+msgstr "外部中繼 2"
+
+#: sys-utils/wdctl.c:76
+#, fuzzy
+msgid "Fan failed"
+msgstr "影迷失敗"
+
+#: sys-utils/wdctl.c:77
+#, fuzzy
+msgid "Keep alive ping reply"
+msgstr "保持活動狀態 ping 回覆"
+
+#: sys-utils/wdctl.c:78
+#, fuzzy
+msgid "Supports magic close char"
+msgstr "支援魔術關閉字元"
+
+#: sys-utils/wdctl.c:79
+#, fuzzy
+msgid "Reset due to CPU overheat"
+msgstr "重置由於 CPU overheat"
+
+#: sys-utils/wdctl.c:80
+#, fuzzy
+msgid "Power over voltage"
+msgstr "乘冪之上 voltage"
+
+#: sys-utils/wdctl.c:81
+#, fuzzy
+msgid "Power bad/power fault"
+msgstr "乘冪不當的/乘冪失誤"
+
+#: sys-utils/wdctl.c:82
+#, fuzzy
+msgid "Pretimeout (in seconds)"
+msgstr "Pretimeout (的秒數)"
+
+#: sys-utils/wdctl.c:83
+#, fuzzy
+msgid "Set timeout (in seconds)"
+msgstr "設定逾時 (的秒數)"
+
+#: sys-utils/wdctl.c:84
+msgid "Not trigger reboot"
+msgstr ""
+
+#: sys-utils/wdctl.c:100
+#, fuzzy
+msgid "flag name"
+msgstr "旗標名稱"
+
+#: sys-utils/wdctl.c:101
+#, fuzzy
+msgid "flag description"
+msgstr "旗標描述"
+
+#: sys-utils/wdctl.c:102
+#, fuzzy
+msgid "flag status"
+msgstr "旗標狀態"
+
+#: sys-utils/wdctl.c:103
+#, fuzzy
+msgid "flag boot status"
+msgstr "旗標開機狀態"
+
+#: sys-utils/wdctl.c:104
+#, fuzzy
+msgid "watchdog device name"
+msgstr "監視程式裝置名稱"
+
+#: sys-utils/wdctl.c:166
+#, fuzzy, c-format
+msgid "unknown flag: %s"
+msgstr "不明旗標：%s"
+
+#: sys-utils/wdctl.c:228
+msgid "Show the status of the hardware watchdog.\n"
+msgstr ""
+
+#: sys-utils/wdctl.c:231
+#, fuzzy
+msgid ""
+" -f, --flags <list> print selected flags only\n"
+" -F, --noflags don't print information about flags\n"
+" -I, --noident don't print watchdog identity information\n"
+" -n, --noheadings don't print headings for flags table\n"
+" -O, --oneline print all information on one line\n"
+" -o, --output <list> output columns of the flags\n"
+" -p, --setpretimeout <sec> set watchdog pre-timeout\n"
+" -g, --setpregovernor <name> set pre-timeout governor\n"
+" -r, --raw use raw output format for flags table\n"
+" -T, --notimeouts don't print watchdog timeouts\n"
+" -s, --settimeout <sec> set watchdog timeout\n"
+" -x, --flags-only print only flags table (same as -I -T)\n"
+msgstr ""
+" -f, --flags <list> 列印已選旗標只有\n"
+" -F, --noflags 不列印相關資訊旗標\n"
+" -I, --noident 不列印監視程式身分資訊\n"
+" -n, --noheadings 不列印標頭用於旗標表格\n"
+" -O, --oneline 列印所有資訊於一個列\n"
+" -o, --output<清單> 輸出欄位的旗標\n"
+" -r, --raw 使用原始輸出格式用於旗標表格\n"
+" -T, --notimeouts 不列印監視程式逾時\n"
+" -s, --settimeout<sec>設定監視程式逾時\n"
+" -x, --flags-only 列印只有旗標表格 (如同 -I -T)\n"
+
+#: sys-utils/wdctl.c:249
+#, fuzzy, c-format
+msgid "The default device is %s.\n"
+msgstr "預設裝置是 %s。\n"
+
+#: sys-utils/wdctl.c:251
+#, fuzzy, c-format
+msgid "No default device is available.\n"
+msgstr "預設裝置是 %s。\n"
+
+#: sys-utils/wdctl.c:379
+#, fuzzy, c-format
+msgid "%s: unknown flags 0x%x\n"
+msgstr "%s：不明旗標 0x%x\n"
+
+#: sys-utils/wdctl.c:415
+#, fuzzy, c-format
+msgid "%s: watchdog already in use, terminating."
+msgstr "%s：監視程式已在使用中，終止。"
+
+#: sys-utils/wdctl.c:429 sys-utils/wdctl.c:528
+#, fuzzy, c-format
+msgid "%s: failed to disarm watchdog"
+msgstr "%s：無法 disarm 監視程式"
+
+#: sys-utils/wdctl.c:439
+#, fuzzy, c-format
+msgid "cannot set timeout for %s"
+msgstr "無法設定逾時用於 %s"
+
+#: sys-utils/wdctl.c:441
+#, fuzzy, c-format
+msgid "Timeout has been set to %d second.\n"
+msgid_plural "Timeout has been set to %d seconds.\n"
+msgstr[0] "從最後一次調整後經過的時間為 %d 秒\n"
+
+#: sys-utils/wdctl.c:449
+#, fuzzy, c-format
+msgid "cannot set pretimeout for %s"
+msgstr "無法設定逾時用於 %s"
+
+#: sys-utils/wdctl.c:451
+#, fuzzy, c-format
+msgid "Pre-timeout has been set to %d second.\n"
+msgid_plural "Pre-timeout has been set to %d seconds.\n"
+msgstr[0] "從最後一次調整後經過的時間為 %d 秒\n"
+
+#: sys-utils/wdctl.c:470
+#, fuzzy
+msgid "cannot set pre-timeout governor"
+msgstr "無法設定逾時用於 %s"
+
+#: sys-utils/wdctl.c:500
+#, fuzzy, c-format
+msgid "%s: failed to get information about watchdog"
+msgstr "%s：無法提取相關資訊監視程式"
+
+#: sys-utils/wdctl.c:609
+#, fuzzy, c-format
+msgid "cannot read information about %s"
+msgstr "無法寫入 %s"
+
+#: sys-utils/wdctl.c:620 sys-utils/wdctl.c:623 sys-utils/wdctl.c:626
+#, fuzzy, c-format
+msgid "%-14s %2i second\n"
+msgid_plural "%-14s %2i seconds\n"
+msgstr[0] "%-15s%2i 秒\n"
+
+#: sys-utils/wdctl.c:621
+#, fuzzy
+msgid "Timeout:"
+msgstr "逾時："
+
+#: sys-utils/wdctl.c:624
+#, fuzzy
+msgid "Timeleft:"
+msgstr "Timeleft："
+
+#: sys-utils/wdctl.c:627
+#, fuzzy
+msgid "Pre-timeout:"
+msgstr "Pre-timeout："
+
+#: sys-utils/wdctl.c:633 sys-utils/wdctl.c:638
+#, fuzzy, c-format
+msgid "%-14s %s\n"
+msgstr "%-15s%2i 秒\n"
+
+#: sys-utils/wdctl.c:633
+#, fuzzy
+msgid "Pre-timeout governor:"
+msgstr "Pre-timeout："
+
+#: sys-utils/wdctl.c:639
+#, fuzzy
+msgid "Available pre-timeout governors:"
+msgstr ""
+"\n"
+"可用欄位：\n"
+
+#: sys-utils/wdctl.c:697
+#, fuzzy
+msgid "Device:"
+msgstr "裝置："
+
+#: sys-utils/wdctl.c:699
+msgid "Identity:"
+msgstr ""
+
+#: sys-utils/wdctl.c:701
+msgid "version"
+msgstr ""
+
+#: sys-utils/wdctl.c:768
+#, fuzzy
+msgid "invalid pretimeout argument"
+msgstr "無效的逾時引數"
+
+#: sys-utils/wdctl.c:822
+#, fuzzy
+msgid "No default device is available."
+msgstr "預設裝置是 %s。\n"
+
+#: sys-utils/zramctl.c:75
+#, fuzzy
+msgid "zram device name"
+msgstr "裝置名稱"
+
+#: sys-utils/zramctl.c:76
+msgid "limit on the uncompressed amount of data"
+msgstr ""
+
+#: sys-utils/zramctl.c:77
+msgid "uncompressed size of stored data"
+msgstr ""
+
+#: sys-utils/zramctl.c:78
+msgid "compressed size of stored data"
+msgstr ""
+
+#: sys-utils/zramctl.c:79
+msgid "the selected compression algorithm"
+msgstr ""
+
+#: sys-utils/zramctl.c:80
+msgid "number of concurrent compress operations"
+msgstr ""
+
+#: sys-utils/zramctl.c:81
+#, fuzzy
+msgid "empty pages with no allocated memory"
+msgstr "配置記憶體時失敗"
+
+#: sys-utils/zramctl.c:82
+msgid "all memory including allocator fragmentation and metadata overhead"
+msgstr ""
+
+#: sys-utils/zramctl.c:83
+msgid "memory limit used to store compressed data"
+msgstr ""
+
+#: sys-utils/zramctl.c:84
+msgid "memory zram have been consumed to store compressed data"
+msgstr ""
+
+#: sys-utils/zramctl.c:85
+msgid "number of objects migrated by compaction"
+msgstr ""
+
+#: sys-utils/zramctl.c:378
+#, fuzzy
+msgid "Failed to parse mm_stat"
+msgstr "剖析開始時失敗"
+
+#: sys-utils/zramctl.c:541
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] <device>\n"
+" %1$s -r <device> [...]\n"
+" %1$s [options] -f | <device> -s <size>\n"
+msgstr ""
+" %1$s [選項] [<loopdev>]\n"
+" %1$s [選項] -f|<loopdev><檔案>\n"
+
+#: sys-utils/zramctl.c:547
+msgid "Set up and control zram devices.\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:550
+msgid " -a, --algorithm <alg> compression algorithm to use\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:551
+#, fuzzy
+msgid " -b, --bytes print sizes in bytes rather than in human readable format\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: sys-utils/zramctl.c:552
+#, fuzzy
+msgid " -f, --find find a free device\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: sys-utils/zramctl.c:553
+#, fuzzy
+msgid " -n, --noheadings don't print headings\n"
+msgstr " -f 不分割長列\n"
+
+#: sys-utils/zramctl.c:554
+#, fuzzy
+msgid " -o, --output <list> columns to use for status output\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/zramctl.c:555
+#, fuzzy
+msgid " --output-all output all columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: sys-utils/zramctl.c:556
+#, fuzzy
+msgid " --raw use raw status output format\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: sys-utils/zramctl.c:557
+#, fuzzy
+msgid " -r, --reset reset all specified devices\n"
+msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+
+#: sys-utils/zramctl.c:558
+#, fuzzy
+msgid " -s, --size <size> device size\n"
+msgstr " -o, --office <office> 辦公室數字\n"
+
+#: sys-utils/zramctl.c:559
+msgid " -t, --streams <number> number of compression streams\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:567
+msgid " <alg> specify algorithm, supported are:\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:568
+msgid " lzo, lz4, lz4hc, deflate, 842 and zstd\n"
+msgstr ""
+
+#: sys-utils/zramctl.c:657
+#, fuzzy
+msgid "failed to parse streams"
+msgstr "剖析開始時失敗"
+
+#: sys-utils/zramctl.c:679
+#, fuzzy
+msgid "option --find is mutually exclusive with <device>"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: sys-utils/zramctl.c:685
+msgid "only one <device> at a time is allowed"
+msgstr ""
+
+#: sys-utils/zramctl.c:688
+msgid "options --algorithm and --streams must be combined with --size"
+msgstr ""
+
+#: sys-utils/zramctl.c:721 sys-utils/zramctl.c:750
+#, fuzzy, c-format
+msgid "%s: failed to reset"
+msgstr "%s：無法剖析"
+
+#: sys-utils/zramctl.c:732 sys-utils/zramctl.c:740
+msgid "no free zram device found"
+msgstr ""
+
+#: sys-utils/zramctl.c:754
+#, fuzzy, c-format
+msgid "%s: failed to set number of streams"
+msgstr "剖析列號的時失敗"
+
+#: sys-utils/zramctl.c:758
+#, fuzzy, c-format
+msgid "%s: failed to set algorithm"
+msgstr "%s：無法設定上一步檔案"
+
+#: sys-utils/zramctl.c:761
+#, fuzzy, c-format
+msgid "%s: failed to set disksize (%ju bytes)"
+msgstr "%s：無法提取 whole-disk 裝置編號"
+
+#: term-utils/agetty.c:512
+#, c-format
+msgid "%s%s (automatic login)\n"
+msgstr ""
+
+#: term-utils/agetty.c:569
+#, fuzzy, c-format
+msgid "%s: can't change root directory %s: %m"
+msgstr "%s：無法變更根目錄 %s：%m"
+
+#: term-utils/agetty.c:572
+#, fuzzy, c-format
+msgid "%s: can't change working directory %s: %m"
+msgstr "%s：無法變更工作目錄 %s：%m"
+
+#: term-utils/agetty.c:575
+#, fuzzy, c-format
+msgid "%s: can't change process priority: %m"
+msgstr "%s：無法變更處理優先權：%m"
+
+#: term-utils/agetty.c:586
+#, c-format
+msgid "%s: can't exec %s: %m"
+msgstr "%s：無法 exec %s: %m"
+
+#: term-utils/agetty.c:617 term-utils/agetty.c:961 term-utils/agetty.c:1192
+#: term-utils/agetty.c:1517 term-utils/agetty.c:1535 term-utils/agetty.c:1572
+#: term-utils/agetty.c:1582 term-utils/agetty.c:1624 term-utils/agetty.c:1985
+#: term-utils/agetty.c:2346 term-utils/agetty.c:2917
+#, fuzzy, c-format
+msgid "failed to allocate memory: %m"
+msgstr "配置記憶體時失敗：%m"
+
+#: term-utils/agetty.c:791
+#, fuzzy
+msgid "invalid delay argument"
+msgstr "無效的前端引數"
+
+#: term-utils/agetty.c:829
+#, fuzzy
+msgid "invalid argument of --local-line"
+msgstr "無效的引數到 --auto /-a 選項"
+
+#: term-utils/agetty.c:848
+#, fuzzy
+msgid "invalid nice argument"
+msgstr "無效的時間引數"
+
+#: term-utils/agetty.c:939
+#, fuzzy, c-format
+msgid "could not get terminal name: %d"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: term-utils/agetty.c:966
+#, c-format
+msgid "bad speed: %s"
+msgstr "不當的速度：%s"
+
+#: term-utils/agetty.c:968
+msgid "too many alternate speeds"
+msgstr "太多交替速度"
+
+#: term-utils/agetty.c:1075 term-utils/agetty.c:1079 term-utils/agetty.c:1132
+#, c-format
+msgid "/dev/%s: cannot open as standard input: %m"
+msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+
+#: term-utils/agetty.c:1098
+#, c-format
+msgid "/dev/%s: not a character device"
+msgstr "/dev/%s: 不是字元裝置"
+
+#: term-utils/agetty.c:1100
+#, fuzzy, c-format
+msgid "/dev/%s: not a tty"
+msgstr "%s：不是 tty"
+
+#: term-utils/agetty.c:1104 term-utils/agetty.c:1136
+#, fuzzy, c-format
+msgid "/dev/%s: cannot get controlling tty: %m"
+msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+
+#: term-utils/agetty.c:1126
+#, fuzzy, c-format
+msgid "/dev/%s: vhangup() failed: %m"
+msgstr "%s：calloc() 失敗：%s\n"
+
+#: term-utils/agetty.c:1147
+#, c-format
+msgid "%s: not open for read/write"
+msgstr "%s：無法開啟用於讀取/寫入"
+
+#: term-utils/agetty.c:1152
+#, fuzzy, c-format
+msgid "/dev/%s: cannot set process group: %m"
+msgstr "%s：無法變更處理優先權：%m"
+
+#: term-utils/agetty.c:1166
+#, c-format
+msgid "%s: dup problem: %m"
+msgstr "%s：dup 問題：%m"
+
+#: term-utils/agetty.c:1183
+#, fuzzy, c-format
+msgid "%s: failed to get terminal attributes: %m"
+msgstr "無法取得終端機屬性用於 %s"
+
+#: term-utils/agetty.c:1414 term-utils/agetty.c:1443
+#, fuzzy, c-format
+msgid "setting terminal attributes failed: %m"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: term-utils/agetty.c:1562
+#, fuzzy
+msgid "cannot open os-release file"
+msgstr "無法開啟鎖定檔案 %s"
+
+#: term-utils/agetty.c:1729
+#, fuzzy, c-format
+msgid "failed to create reload file: %s: %m"
+msgstr "讀取 typescript 檔案 %s 時失敗"
+
+#: term-utils/agetty.c:2049
+#, fuzzy, c-format
+msgid "failed to get terminal attributes: %m"
+msgstr "無法取得終端機屬性用於 %s"
+
+#: term-utils/agetty.c:2071
+msgid "[press ENTER to login]"
+msgstr ""
+
+#: term-utils/agetty.c:2099
+#, fuzzy
+msgid "Num Lock off"
+msgstr "Num 鎖定關閉"
+
+#: term-utils/agetty.c:2102
+#, fuzzy
+msgid "Num Lock on"
+msgstr "Num 鎖定開"
+
+#: term-utils/agetty.c:2105
+#, fuzzy
+msgid "Caps Lock on"
+msgstr "大寫鍵開"
+
+#: term-utils/agetty.c:2108
+#, fuzzy
+msgid "Scroll Lock on"
+msgstr "捲動鎖定開"
+
+#: term-utils/agetty.c:2111
+#, fuzzy, c-format
+msgid ""
+"Hint: %s\n"
+"\n"
+msgstr ""
+"提示：%s\n"
+"\n"
+
+#: term-utils/agetty.c:2255
+#, c-format
+msgid "%s: read: %m"
+msgstr "%s：讀取：%m"
+
+#: term-utils/agetty.c:2322
+#, c-format
+msgid "%s: input overrun"
+msgstr "%s：輸入超出"
+
+#: term-utils/agetty.c:2342 term-utils/agetty.c:2350
+#, c-format
+msgid "%s: invalid character conversion for login name"
+msgstr ""
+
+#: term-utils/agetty.c:2356
+#, c-format
+msgid "%s: invalid character 0x%x in login name"
+msgstr ""
+
+#: term-utils/agetty.c:2441
+#, fuzzy, c-format
+msgid "%s: failed to set terminal attributes: %m"
+msgstr "無法設定終端機屬性用於 %s"
+
+#: term-utils/agetty.c:2486
+#, fuzzy, c-format
+msgid ""
+" %1$s [options] <line> [<baud_rate>,...] [<termtype>]\n"
+" %1$s [options] <baud_rate>,... <line> [<termtype>]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %1$s [選項] 列 baud_rate ,...[termtype]\n"
+" %1$s [選項] baud_rate ,...列 [termtype]\n"
+
+#: term-utils/agetty.c:2490
+msgid "Open a terminal and set its mode.\n"
+msgstr ""
+
+#: term-utils/agetty.c:2493
+#, fuzzy
+msgid " -8, --8bits assume 8-bit tty\n"
+msgstr " -s, --status 查詢印表機狀態\n"
+
+#: term-utils/agetty.c:2494
+msgid " -a, --autologin <user> login the specified user automatically\n"
+msgstr ""
+
+#: term-utils/agetty.c:2495
+#, fuzzy
+msgid " -c, --noreset do not reset control mode\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/agetty.c:2496
+#, fuzzy
+msgid " -E, --remote use -r <hostname> for login(1)\n"
+msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+
+#: term-utils/agetty.c:2497
+#, fuzzy
+msgid " -f, --issue-file <list> display issue files or directories\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/agetty.c:2498
+#, fuzzy
+msgid " --show-issue display issue file and exit\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/agetty.c:2499
+msgid " -h, --flow-control enable hardware flow control\n"
+msgstr ""
+
+#: term-utils/agetty.c:2500
+#, fuzzy
+msgid " -H, --host <hostname> specify login host\n"
+msgstr " -s, --shell <shell> 指定登入命令殼\n"
+
+#: term-utils/agetty.c:2501
+#, fuzzy
+msgid " -i, --noissue do not display issue file\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/agetty.c:2502
+msgid " -I, --init-string <string> set init string\n"
+msgstr ""
+
+#: term-utils/agetty.c:2503
+#, fuzzy
+msgid " -J --noclear do not clear the screen before prompt\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/agetty.c:2504
+msgid " -l, --login-program <file> specify login program\n"
+msgstr ""
+
+#: term-utils/agetty.c:2505
+#, fuzzy
+msgid " -L, --local-line[=<mode>] control the local line flag\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: term-utils/agetty.c:2506
+msgid " -m, --extract-baud extract baud rate during connect\n"
+msgstr ""
+
+#: term-utils/agetty.c:2507
+#, fuzzy
+msgid " -n, --skip-login do not prompt for login\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2508
+#, fuzzy
+msgid " -N --nonewline do not print a newline before issue\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: term-utils/agetty.c:2509
+#, fuzzy
+msgid " -o, --login-options <opts> options that are passed to login\n"
+msgstr " -l, --longoptions <longopts> 長選項為辨識的\n"
+
+#: term-utils/agetty.c:2510
+#, fuzzy
+msgid " -p, --login-pause wait for any key before the login\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2511
+#, fuzzy
+msgid " -r, --chroot <dir> change root to the directory\n"
+msgstr " -a, --abort <on|off> 放棄於錯誤\n"
+
+#: term-utils/agetty.c:2512
+#, fuzzy
+msgid " -R, --hangup do virtually hangup on the tty\n"
+msgstr " -u, --unquote 不引言輸出\n"
+
+#: term-utils/agetty.c:2513
+#, fuzzy
+msgid " -s, --keep-baud try to keep baud rate after break\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: term-utils/agetty.c:2514
+msgid " -t, --timeout <number> login process timeout\n"
+msgstr ""
+
+#: term-utils/agetty.c:2515
+msgid " -U, --detect-case detect uppercase terminal\n"
+msgstr ""
+
+#: term-utils/agetty.c:2516
+#, fuzzy
+msgid " -w, --wait-cr wait carriage-return\n"
+msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+
+#: term-utils/agetty.c:2517
+#, fuzzy
+msgid " --nohints do not print hints\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2518
+#, fuzzy
+msgid " --nohostname no hostname at all will be shown\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: term-utils/agetty.c:2519
+msgid " --long-hostname show full qualified hostname\n"
+msgstr ""
+
+#: term-utils/agetty.c:2520
+msgid " --erase-chars <string> additional backspace chars\n"
+msgstr ""
+
+#: term-utils/agetty.c:2521
+msgid " --kill-chars <string> additional kill chars\n"
+msgstr ""
+
+#: term-utils/agetty.c:2522
+msgid " --chdir <directory> chdir before the login\n"
+msgstr ""
+
+#: term-utils/agetty.c:2523
+#, fuzzy
+msgid " --delay <number> sleep seconds before prompt\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/agetty.c:2524
+msgid " --nice <number> run login with this priority\n"
+msgstr ""
+
+#: term-utils/agetty.c:2525
+#, fuzzy
+msgid " --reload reload prompts on running agetty instances\n"
+msgstr " -f 不分割長列\n"
+
+#: term-utils/agetty.c:2526
+#, fuzzy
+msgid " --list-speeds display supported baud rates\n"
+msgstr " -T [或 --list-types]：列出已知分割區類型"
+
+#: term-utils/agetty.c:2874
+#, fuzzy, c-format
+msgid "%d user"
+msgid_plural "%d users"
+msgstr[0] "使用者"
+
+#: term-utils/agetty.c:3004
+#, fuzzy, c-format
+msgid "checkname failed: %m"
+msgstr "chown 失敗：%s"
+
+#: term-utils/agetty.c:3016
+#, fuzzy, c-format
+msgid "cannot touch file %s"
+msgstr "無法關閉檔案 %s"
+
+#: term-utils/agetty.c:3020
+msgid "--reload is unsupported on your system"
+msgstr ""
+
+#: term-utils/mesg.c:78
+#, fuzzy, c-format
+msgid " %s [options] [y | n]\n"
+msgstr " %s [選項] [y|n]\n"
+
+#: term-utils/mesg.c:81
+#, fuzzy
+msgid "Control write access of other users to your terminal.\n"
+msgstr "寫入存取到您的終端機被拒絕"
+
+#: term-utils/mesg.c:84
+#, fuzzy
+msgid " -v, --verbose explain what is being done\n"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: term-utils/mesg.c:130
+msgid "no tty"
+msgstr ""
+
+#: term-utils/mesg.c:139
+#, c-format
+msgid "ttyname() failed, attempting to go around using: %s"
+msgstr ""
+
+#: term-utils/mesg.c:146
+#, fuzzy
+msgid "is y"
+msgstr "是 y"
+
+#: term-utils/mesg.c:149
+#, fuzzy
+msgid "is n"
+msgstr "是 n"
+
+#: term-utils/mesg.c:165 term-utils/mesg.c:172
+#, fuzzy, c-format
+msgid "change %s mode failed"
+msgstr "變更 %s 模式失敗"
+
+#: term-utils/mesg.c:167
+#, fuzzy
+msgid "write access to your terminal is allowed"
+msgstr "寫入存取到您的終端機被允許"
+
+#: term-utils/mesg.c:174
+#, fuzzy
+msgid "write access to your terminal is denied"
+msgstr "寫入存取到您的終端機被拒絕"
+
+#: term-utils/script.c:193
+#, fuzzy, c-format
+msgid " %s [options] [file]\n"
+msgstr " %s [選項] [檔案]\n"
+
+#: term-utils/script.c:196
+msgid "Make a typescript of a terminal session.\n"
+msgstr ""
+
+#: term-utils/script.c:199
+#, fuzzy
+msgid " -I, --log-in <file> log stdin to file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/script.c:200
+#, fuzzy
+msgid " -O, --log-out <file> log stdout to file (default)\n"
+msgstr " -a, --all 所有 (預設)\n"
+
+#: term-utils/script.c:201
+#, fuzzy
+msgid " -B, --log-io <file> log stdin and stdout to file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/script.c:204
+#, fuzzy
+msgid " -T, --log-timing <file> log timing information to file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/script.c:205
+msgid " -t[<file>], --timing[=<file>] deprecated alias to -T (default file is stderr)\n"
+msgstr ""
+
+#: term-utils/script.c:206
+msgid " -m, --logging-format <name> force to 'classic' or 'advanced' format\n"
+msgstr ""
+
+#: term-utils/script.c:209
+#, fuzzy
+msgid " -a, --append append to the log file\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: term-utils/script.c:210
+#, fuzzy
+msgid " -c, --command <command> run command rather than interactive shell\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: term-utils/script.c:211
+#, fuzzy
+msgid " -e, --return return exit code of the child process\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/script.c:212
+#, fuzzy
+msgid " -f, --flush run flush after each write\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: term-utils/script.c:213
+#, fuzzy
+msgid " --force use output file even when it is a link\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: term-utils/script.c:214
+#, fuzzy
+msgid " -E, --echo <when> echo input in session (auto, always or never)\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: term-utils/script.c:215
+#, fuzzy
+msgid " -o, --output-limit <size> terminate if output files exceed size\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: term-utils/script.c:216
+#, fuzzy
+msgid " -q, --quiet be quiet\n"
+msgstr " -q [或 --quiet]： 抑制警告訊息"
+
+#: term-utils/script.c:299
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Script done on %s [<%s>]\n"
+msgstr ""
+"\n"
+"命令稿已於 %s 完成"
+
+#: term-utils/script.c:301
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Script done on %s [COMMAND_EXIT_CODE=\"%d\"]\n"
+msgstr ""
+"\n"
+"命令稿已於 %s 完成"
+
+#: term-utils/script.c:399
+#, fuzzy, c-format
+msgid "Script started on %s ["
+msgstr "命令稿啟動於 %s"
+
+#: term-utils/script.c:415
+#, c-format
+msgid "%*s<not executed on terminal>"
+msgstr ""
+
+#: term-utils/script.c:689
+#, c-format
+msgid "Script terminated, max output files size %<PRIu64> exceeded.\n"
+msgstr ""
+
+#: term-utils/script.c:691
+msgid "max output size exceeded"
+msgstr ""
+
+#: term-utils/script.c:752
+#, fuzzy, c-format
+msgid ""
+"output file `%s' is a link\n"
+"Use --force if you really want to use it.\n"
+"Program not started."
+msgstr ""
+"輸出檔案『%s』是鏈結\n"
+"使用 --force 如果您真的要使用它。\n"
+"程式無法開始。"
+
+#: term-utils/script.c:833
+#, fuzzy, c-format
+msgid "unssuported echo mode: '%s'"
+msgstr "不受支援的命令"
+
+#: term-utils/script.c:858
+#, fuzzy
+msgid "failed to parse output limit size"
+msgstr "剖析 %s 限制時失敗"
+
+#: term-utils/script.c:869
+#, fuzzy, c-format
+msgid "unsupported logging format: '%s'"
+msgstr "不受支援的引數：%s"
+
+#: term-utils/script.c:922
+#, fuzzy
+msgid "log multiple streams is mutually exclusive with 'classic' format"
+msgstr "選項 --pid 和命令彼此互斥"
+
+#: term-utils/script.c:949
+#, fuzzy, c-format
+msgid "Script started"
+msgstr "命令稿啟動於 %s"
+
+#: term-utils/script.c:951
+#, fuzzy, c-format
+msgid ", output log file is '%s'"
+msgstr "命令稿已完成，檔案是 %s\n"
+
+#: term-utils/script.c:953
+#, fuzzy, c-format
+msgid ", input log file is '%s'"
+msgstr "命令稿已完成，檔案是 %s\n"
+
+#: term-utils/script.c:955
+#, fuzzy, c-format
+msgid ", timing file is '%s'"
+msgstr "無法開啟時序檔案 %s"
+
+#: term-utils/script.c:956
+#, fuzzy, c-format
+msgid ".\n"
+msgstr "\n"
+
+#: term-utils/script.c:1065
+#, fuzzy, c-format
+msgid "Script done.\n"
+msgstr "命令稿已完成，檔案是 %s\n"
+
+#: term-utils/scriptlive.c:60
+#, fuzzy, c-format
+msgid " %s [-t] timingfile [-I|-B] typescript\n"
+msgstr " %s [-t] timingfile [typescript] [除數]\n"
+
+#: term-utils/scriptlive.c:64
+msgid "Execute terminal typescript.\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:67 term-utils/scriptreplay.c:57
+#, fuzzy
+msgid " -t, --timing <file> script timing log file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/scriptlive.c:68 term-utils/scriptreplay.c:58
+msgid " -T, --log-timing <file> alias to -t\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:69 term-utils/scriptreplay.c:59
+#, fuzzy
+msgid " -I, --log-in <file> script stdin log file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/scriptlive.c:70 term-utils/scriptreplay.c:61
+msgid " -B, --log-io <file> script stdin and stdout log file\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:73
+#, fuzzy
+msgid " -c, --command <command> run command rather than interactive shell\n"
+msgstr " -c --command <command> 運行單一命令字串透過命令殼\n"
+
+#: term-utils/scriptlive.c:74 term-utils/scriptreplay.c:67
+msgid " -d, --divisor <num> speed up or slow down execution with time divisor\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:75 term-utils/scriptreplay.c:68
+#, fuzzy
+msgid " -m, --maxdelay <num> wait at most this many seconds between updates\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/scriptlive.c:226 term-utils/scriptreplay.c:233
+#, fuzzy
+msgid "failed to parse maximal delay argument"
+msgstr "剖析引數時失敗"
+
+#: term-utils/scriptlive.c:249 term-utils/scriptreplay.c:274
+#, fuzzy
+msgid "timing file not specified"
+msgstr "沒有檔案指定的"
+
+#: term-utils/scriptlive.c:251
+#, fuzzy
+msgid "stdin typescript file not specified"
+msgstr "沒有輸入檔案指定的"
+
+#: term-utils/scriptlive.c:277
+#, c-format
+msgid ">>> scriptlive: Starting your typescript execution by %s.\n"
+msgstr ""
+
+#: term-utils/scriptlive.c:284
+#, fuzzy
+msgid "failed to allocate PTY handler"
+msgstr "配置迭代器時失敗"
+
+#: term-utils/scriptlive.c:365
+#, c-format
+msgid ""
+"\n"
+">>> scriptlive: done.\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:50
+#, fuzzy, c-format
+msgid " %s [-t] timingfile [typescript] [divisor]\n"
+msgstr " %s [-t] timingfile [typescript] [除數]\n"
+
+#: term-utils/scriptreplay.c:54
+msgid "Play back terminal typescripts, using timing information.\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:60
+#, fuzzy
+msgid " -O, --log-out <file> script stdout log file (default)\n"
+msgstr " -a, --all 所有 (預設)\n"
+
+#: term-utils/scriptreplay.c:63
+msgid " -s, --typescript <file> deprecated alias to -O\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:66
+#, fuzzy
+msgid " --summary display overview about recorded session and exit\n"
+msgstr " -V 輸出版本資訊然後離開\n"
+
+#: term-utils/scriptreplay.c:69
+msgid " -x, --stream <name> stream type (out, in, signal or info)\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:70
+msgid " -c, --cr-mode <type> CR char mode (auto, never, always)\n"
+msgstr ""
+
+#: term-utils/scriptreplay.c:131
+#, fuzzy
+msgid "unexpected tcgetattr failure"
+msgstr "tcgetattr 失敗"
+
+#: term-utils/scriptreplay.c:212
+#, fuzzy, c-format
+msgid "unsupported mode name: '%s'"
+msgstr "不受支援的引數：%s"
+
+#: term-utils/scriptreplay.c:245
+#, fuzzy, c-format
+msgid "unsupported stream name: '%s'"
+msgstr "不受支援的引數：%s"
+
+#: term-utils/scriptreplay.c:276
+#, fuzzy
+msgid "data log file not specified"
+msgstr "沒有檔案指定的"
+
+#: term-utils/scriptreplay.c:330
+#, fuzzy, c-format
+msgid "%s: log file error"
+msgstr "klogctl 錯誤"
+
+#: term-utils/scriptreplay.c:332
+#, c-format
+msgid "%s: line %d: timing file error"
+msgstr ""
+
+#: term-utils/setterm.c:237
+#, fuzzy, c-format
+msgid "argument error: bright %s is not supported"
+msgstr "速度 %d 不受支援"
+
+#: term-utils/setterm.c:328
+#, fuzzy
+msgid "too many tabs"
+msgstr "太多引數"
+
+#: term-utils/setterm.c:384
+msgid "Set the attributes of a terminal.\n"
+msgstr ""
+
+#: term-utils/setterm.c:387
+#, fuzzy
+msgid " --term <terminal_name> override TERM environment variable\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:388
+#, fuzzy
+msgid " --reset reset terminal to power-on state\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:389
+#, fuzzy
+msgid " --resize reset terminal rows and columns\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:390
+#, fuzzy
+msgid " --initialize display init string, and use default settings\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/setterm.c:391
+#, fuzzy
+msgid " --default use default terminal settings\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/setterm.c:392
+#, fuzzy
+msgid " --store save current terminal settings as default\n"
+msgstr " -q, --stats 顯示統計關於 tty\n"
+
+#: term-utils/setterm.c:395
+#, fuzzy
+msgid " --cursor on|off display cursor\n"
+msgstr " -g, --get-threshold 顯示目前的臨界值\n"
+
+#: term-utils/setterm.c:396
+#, fuzzy
+msgid " --repeat on|off keyboard repeat\n"
+msgstr " -r, --reset 重置通訊埠\n"
+
+#: term-utils/setterm.c:397
+msgid " --appcursorkeys on|off cursor key application mode\n"
+msgstr ""
+
+#: term-utils/setterm.c:398
+#, fuzzy
+msgid " --linewrap on|off continue on a new line when a line is full\n"
+msgstr " -h, --help 這個小用法指導\n"
+
+#: term-utils/setterm.c:399
+msgid " --inversescreen on|off swap colors for the whole screen\n"
+msgstr ""
+
+#: term-utils/setterm.c:402
+#, fuzzy
+msgid " --msg on|off send kernel messages to console\n"
+msgstr " -s 列印訊息到標準輸出\n"
+
+#: term-utils/setterm.c:403
+#, fuzzy
+msgid " --msglevel <0-8> kernel console log level\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: term-utils/setterm.c:406
+msgid " --foreground default|<color> set foreground color\n"
+msgstr ""
+
+#: term-utils/setterm.c:407
+msgid " --background default|<color> set background color\n"
+msgstr ""
+
+#: term-utils/setterm.c:408
+msgid " --ulcolor [bright] <color> set underlined text color\n"
+msgstr ""
+
+#: term-utils/setterm.c:409
+msgid " --hbcolor [bright] <color> set half-bright text color\n"
+msgstr ""
+
+#: term-utils/setterm.c:410
+msgid " <color>: black blue cyan green grey magenta red white yellow\n"
+msgstr ""
+
+#: term-utils/setterm.c:413
+#, fuzzy
+msgid " --bold on|off bold\n"
+msgstr " -v, --verbose 列印詳細的資料\n"
+
+#: term-utils/setterm.c:414
+#, fuzzy
+msgid " --half-bright on|off dim\n"
+msgstr " [ -half-bright [on|off] ]\n"
+
+#: term-utils/setterm.c:415
+#, fuzzy
+msgid " --blink on|off blink\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: term-utils/setterm.c:416
+#, fuzzy
+msgid " --underline on|off underline\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: term-utils/setterm.c:417
+msgid " --reverse on|off swap foreground and background colors\n"
+msgstr ""
+
+#: term-utils/setterm.c:420
+#, fuzzy
+msgid " --clear[=<all|rest>] clear screen and set cursor position\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: term-utils/setterm.c:421
+msgid " --tabs[=<number>...] set these tab stop positions, or show them\n"
+msgstr ""
+
+#: term-utils/setterm.c:422
+msgid " --clrtabs[=<number>...] clear these tab stop positions, or all\n"
+msgstr ""
+
+#: term-utils/setterm.c:423
+msgid " --regtabs[=1-160] set a regular tab stop interval\n"
+msgstr ""
+
+#: term-utils/setterm.c:424
+msgid " --blank[=0-60|force|poke] set time of inactivity before screen blanks\n"
+msgstr ""
+
+#: term-utils/setterm.c:427
+msgid " --dump[=<number>] write vcsa<number> console dump to file\n"
+msgstr ""
+
+#: term-utils/setterm.c:428
+#, fuzzy
+msgid " --append <number> append vcsa<number> console dump to file\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: term-utils/setterm.c:429
+#, fuzzy
+msgid " --file <filename> name of the dump file\n"
+msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#: term-utils/setterm.c:432
+#, fuzzy
+msgid " --powersave on|vsync|hsync|powerdown|off\n"
+msgstr " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
+
+#: term-utils/setterm.c:433
+#, fuzzy
+msgid " set vesa powersaving features\n"
+msgstr " 「%s」)\n"
+
+#: term-utils/setterm.c:434
+msgid " --powerdown[=<0-60>] set vesa powerdown interval in minutes\n"
+msgstr ""
+
+#: term-utils/setterm.c:437
+#, fuzzy
+msgid " --blength[=<0-2000>] duration of the bell in milliseconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+
+#: term-utils/setterm.c:438
+msgid " --bfreq[=<number>] bell frequency in Hertz\n"
+msgstr ""
+
+#: term-utils/setterm.c:451
+msgid "duplicate use of an option"
+msgstr ""
+
+#: term-utils/setterm.c:763
+#, fuzzy
+msgid "cannot force blank"
+msgstr "無法強制空白"
+
+#: term-utils/setterm.c:768
+#, fuzzy
+msgid "cannot force unblank"
+msgstr "無法強制 unblank"
+
+#: term-utils/setterm.c:774
+#, fuzzy
+msgid "cannot get blank status"
+msgstr "無法提取空白狀態"
+
+#: term-utils/setterm.c:799
+#, fuzzy, c-format
+msgid "cannot open dump file %s for output"
+msgstr "無法開啟傾印檔案 %s 用於輸出"
+
+#: term-utils/setterm.c:840
+#, fuzzy, c-format
+msgid "terminal %s does not support %s"
+msgstr "使用者 %s 不存在"
+
+#: term-utils/setterm.c:878
+#, fuzzy
+msgid "select failed"
+msgstr "semctl 失敗"
+
+#: term-utils/setterm.c:904
+#, fuzzy
+msgid "stdin does not refer to a terminal"
+msgstr "%s 於此終端機被拒絕登入。\n"
+
+#: term-utils/setterm.c:932
+#, fuzzy, c-format
+msgid "invalid cursor position: %s"
+msgstr "無效的選項"
+
+#: term-utils/setterm.c:954
+#, fuzzy
+msgid "reset failed"
+msgstr "setgid 失敗"
+
+#: term-utils/setterm.c:1118
+#, fuzzy
+msgid "cannot (un)set powersave mode"
+msgstr "無法 (un) 設定 powersave 模式"
+
+#: term-utils/setterm.c:1137 term-utils/setterm.c:1146
+#, fuzzy
+msgid "klogctl error"
+msgstr "klogctl 錯誤"
+
+#: term-utils/setterm.c:1167
+#, fuzzy
+msgid "$TERM is not defined."
+msgstr "$TERM 未被定義。"
+
+#: term-utils/setterm.c:1174
+#, fuzzy
+msgid "terminfo database cannot be found"
+msgstr "terminfo 資料庫無法找到"
+
+#: term-utils/setterm.c:1176
+#, fuzzy, c-format
+msgid "%s: unknown terminal type"
+msgstr "%s：不明終端機類型"
+
+#: term-utils/setterm.c:1178
+#, fuzzy
+msgid "terminal is hardcopy"
+msgstr "終端機是 hardcopy"
+
+#: term-utils/ttymsg.c:81
+#, fuzzy, c-format
+msgid "internal error: too many iov's"
+msgstr "內部錯誤"
+
+#: term-utils/ttymsg.c:94
+#, c-format
+msgid "excessively long line arg"
+msgstr "過長的命令列引數"
+
+#: term-utils/ttymsg.c:108
+#, fuzzy, c-format
+msgid "open failed"
+msgstr "openpty 失敗"
+
+#: term-utils/ttymsg.c:147
+#, fuzzy, c-format
+msgid "fork: %m"
+msgstr "衍生：%s"
+
+#: term-utils/ttymsg.c:149
+#, c-format
+msgid "cannot fork"
+msgstr "無法衍生執行"
+
+#: term-utils/ttymsg.c:182
+#, fuzzy, c-format
+msgid "%s: BAD ERROR, message is far too long"
+msgstr "%s：不當的錯誤，訊息是 far 太長"
+
+#: term-utils/wall.c:89
+#, fuzzy, c-format
+msgid " %s [options] [<file> | <message>]\n"
+msgstr " %s [選項] [訊息]\n"
+
+#: term-utils/wall.c:92
+msgid "Write a message to all users.\n"
+msgstr ""
+
+#: term-utils/wall.c:95
+#, fuzzy
+msgid " -g, --group <group> only send message to group\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: term-utils/wall.c:96
+#, fuzzy
+msgid " -n, --nobanner do not print banner, works only for root\n"
+msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#: term-utils/wall.c:97
+#, fuzzy
+msgid " -t, --timeout <timeout> write timeout in seconds\n"
+msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+
+#: term-utils/wall.c:125
+#, fuzzy
+msgid "invalid group argument"
+msgstr "無效的速度引數"
+
+#: term-utils/wall.c:127
+#, fuzzy, c-format
+msgid "%s: unknown gid"
+msgstr "%c: 不明的命令\n"
+
+#: term-utils/wall.c:170
+msgid "getgrouplist found more groups than sysconf allows"
+msgstr ""
+
+#: term-utils/wall.c:216
+#, fuzzy
+msgid "--nobanner is available only for root"
+msgstr "--nobanner 是可用只有用於根"
+
+#: term-utils/wall.c:221
+#, fuzzy, c-format
+msgid "invalid timeout argument: %s"
+msgstr "無效的逾時引數：%s"
+
+#: term-utils/wall.c:293
+#, fuzzy
+msgid "cannot get passwd uid"
+msgstr "無法提取 passwd uid"
+
+#: term-utils/wall.c:317
+#, fuzzy, c-format
+msgid "Broadcast message from %s@%s (%s) (%s):"
+msgstr "廣播訊息來自 %s@%s"
+
+#: term-utils/wall.c:349
+#, fuzzy, c-format
+msgid "will not read %s - use stdin."
+msgstr "將無法讀取 %s - 使用標準輸入。"
+
+#: term-utils/write.c:87
+#, fuzzy, c-format
+msgid " %s [options] <user> [<ttyname>]\n"
+msgstr " %s [選項] <user> [<ttyname>]\n"
+
+#: term-utils/write.c:91
+msgid "Send a message to another user.\n"
+msgstr ""
+
+#: term-utils/write.c:116
+#, c-format
+msgid "effective gid does not match group of %s"
+msgstr ""
+
+#: term-utils/write.c:201
+#, fuzzy, c-format
+msgid "%s is not logged in"
+msgstr "%s 未被登入"
+
+#: term-utils/write.c:206
+#, fuzzy
+msgid "can't find your tty's name"
+msgstr "找不到您的 tty's 名稱"
+
+#: term-utils/write.c:211
+#, fuzzy, c-format
+msgid "%s has messages disabled"
+msgstr "%s 有訊息已停用"
+
+#: term-utils/write.c:214
+#, fuzzy, c-format
+msgid "%s is logged in more than once; writing to %s"
+msgstr "%s 被登入一次以上；寫入 %s"
+
+#: term-utils/write.c:265
+#, fuzzy, c-format
+msgid "Message from %s@%s (as %s) on %s at %02d:%02d ..."
+msgstr "訊息來自 %s@%s (身分為 %s) 於 %s 在 %s …"
+
+#: term-utils/write.c:269
+#, fuzzy, c-format
+msgid "Message from %s@%s on %s at %02d:%02d ..."
+msgstr "訊息來自 %s@%s 於 %s 在 %s …"
+
+#: term-utils/write.c:280
+#, fuzzy
+msgid "carefulputc failed"
+msgstr "carefulputc 失敗"
+
+#: term-utils/write.c:318
+#, fuzzy
+msgid "you have write permission turned off"
+msgstr "您有寫入權限被關閉"
+
+#: term-utils/write.c:341
+#, fuzzy, c-format
+msgid "%s is not logged in on %s"
+msgstr "%s 未被登入於 %s"
+
+#: term-utils/write.c:347
+#, fuzzy, c-format
+msgid "%s has messages disabled on %s"
+msgstr "%s 有訊息已停用於 %s"
+
+#: text-utils/col.c:174
+#, fuzzy
+msgid "Filter out reverse line feeds from standard input.\n"
+msgstr "太多單純換列字元。\n"
+
+#: text-utils/col.c:177
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Options:\n"
+" -b, --no-backspaces do not output backspaces\n"
+" -f, --fine permit forward half line feeds\n"
+" -p, --pass pass unknown control sequences\n"
+" -h, --tabs convert spaces to tabs\n"
+" -x, --spaces convert tabs to spaces\n"
+" -l, --lines NUM buffer at least NUM lines\n"
+msgstr ""
+"\n"
+"選項：\n"
+" -b, --no-backspaces 不輸出退格\n"
+" -f, --fine 允許轉寄半送列\n"
+" -p, --pass 回合不明控制序列\n"
+" -h, --tabs 轉換空格轉為跳格\n"
+" -x, --spaces 轉換跳格轉為空格\n"
+" -l, --lines NUM 緩衝區至少 NUM 列\n"
+" -V, --version 輸出版本資訊然後離開\n"
+" -H, --help 顯示這份說明然後離開\n"
+"\n"
+
+#: text-utils/col.c:496
+#, fuzzy, c-format
+msgid "warning: can't back up %s."
+msgstr "警告：無法上一步向上 %s。"
+
+#: text-utils/col.c:498
+msgid "past first line"
+msgstr "略過第一列"
+
+#: text-utils/col.c:499
+msgid "-- line already flushed"
+msgstr "-- 列已經清理"
+
+#: text-utils/col.c:565
+#, fuzzy
+msgid "bad -l argument"
+msgstr "不當的 -l 引數"
+
+#: text-utils/colcrt.c:82 text-utils/column.c:748
+#, fuzzy, c-format
+msgid " %s [options] [<file>...]\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: text-utils/colcrt.c:85
+msgid "Filter nroff output for CRT previewing.\n"
+msgstr ""
+
+#: text-utils/colcrt.c:88
+msgid " -, --no-underlining suppress all underlining\n"
+msgstr ""
+
+#: text-utils/colcrt.c:89
+#, fuzzy
+msgid " -2, --half-lines print all half-lines\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: text-utils/colrm.c:60
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Usage:\n"
+" %s [startcol [endcol]]\n"
+msgstr ""
+"\n"
+"用法：\n"
+" %s [startcol [endcol]]\n"
+
+#: text-utils/colrm.c:65
+msgid "Filter out the specified columns.\n"
+msgstr ""
+
+#: text-utils/colrm.c:69
+#, fuzzy, c-format
+msgid ""
+"%s reads from standard input and writes to standard output\n"
+"\n"
+msgstr ""
+"%s 讀取從標準輸入和寫入標準輸出\n"
+"\n"
+
+#: text-utils/colrm.c:184
+#, fuzzy
+msgid "first argument"
+msgstr "第一個引數"
+
+#: text-utils/colrm.c:186
+#, fuzzy
+msgid "second argument"
+msgstr "秒引數"
+
+#: text-utils/column.c:282
+#, fuzzy
+msgid "failed to parse column"
+msgstr "剖析結束時失敗"
+
+#: text-utils/column.c:291
+#, fuzzy, c-format
+msgid "undefined column name '%s'"
+msgstr "mountpoint"
+
+#: text-utils/column.c:403
+#, fuzzy
+msgid "failed to parse --table-order list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:481
+#, fuzzy
+msgid "failed to parse --table-hide list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:485
+#, fuzzy
+msgid "failed to parse --table-right list"
+msgstr "剖析開始時失敗"
+
+#: text-utils/column.c:489
+#, fuzzy
+msgid "failed to parse --table-trunc list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:493
+#, fuzzy
+msgid "failed to parse --table-noextreme list"
+msgstr "剖析大小時失敗"
+
+#: text-utils/column.c:497
+#, fuzzy
+msgid "failed to parse --table-wrap list"
+msgstr "剖析開始時失敗"
+
+#: text-utils/column.c:549
+#, c-format
+msgid "line %zu: for JSON the name of the column %zu is required"
+msgstr ""
+
+#: text-utils/column.c:566
+#, fuzzy
+msgid "failed to allocate output data"
+msgstr "初始化輸出表格時失敗"
+
+#: text-utils/column.c:751
+msgid "Columnate lists.\n"
+msgstr ""
+
+#: text-utils/column.c:754
+#, fuzzy
+msgid " -t, --table create a table\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: text-utils/column.c:755
+#, fuzzy
+msgid " -n, --table-name <name> table name for JSON output\n"
+msgstr " -n, --name <progname> 名稱之下該項錯誤被報告\n"
+
+#: text-utils/column.c:756
+#, fuzzy
+msgid " -O, --table-order <columns> specify order of output columns\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: text-utils/column.c:757
+#, fuzzy
+msgid " -C, --table-column <properties> define column\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: text-utils/column.c:758
+#, fuzzy
+msgid " -N, --table-columns <names> comma separated columns names\n"
+msgstr " -Q, --queue 建立訊息佇列\n"
+
+#: text-utils/column.c:759
+#, fuzzy
+msgid " -l, --table-columns-limit <num> maximal number of input columns\n"
+msgstr "剖析列號的時失敗"
+
+#: text-utils/column.c:760
+msgid " -E, --table-noextreme <columns> don't count long text from the columns to column width\n"
+msgstr ""
+
+#: text-utils/column.c:761
+#, fuzzy
+msgid " -d, --table-noheadings don't print header\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/column.c:762
+#, fuzzy
+msgid " -m, --table-maxout fill all available space\n"
+msgstr " -a, --all 查詢所有原始裝置\n"
+
+#: text-utils/column.c:763
+msgid " -e, --table-header-repeat repeat header for each page\n"
+msgstr ""
+
+#: text-utils/column.c:764
+#, fuzzy
+msgid " -H, --table-hide <columns> don't print the columns\n"
+msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+
+#: text-utils/column.c:765
+msgid " -R, --table-right <columns> right align text in these columns\n"
+msgstr ""
+
+#: text-utils/column.c:766
+#, fuzzy
+msgid " -T, --table-truncate <columns> truncate text in the columns when necessary\n"
+msgstr " -n, --noparity 設定同位到無\n"
+
+#: text-utils/column.c:767
+msgid " -W, --table-wrap <columns> wrap text in the columns when necessary\n"
+msgstr ""
+
+#: text-utils/column.c:768
+#, fuzzy
+msgid " -L, --keep-empty-lines don't ignore empty lines\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/column.c:769
+#, fuzzy
+msgid " -J, --json use JSON output format for table\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: text-utils/column.c:772
+#, fuzzy
+msgid " -r, --tree <column> column to use tree-like output for the table\n"
+msgstr " -V, --version 輸出版本資訊\n"
+
+#: text-utils/column.c:773
+#, fuzzy
+msgid " -i, --tree-id <column> line ID to specify child-parent relation\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: text-utils/column.c:774
+#, fuzzy
+msgid " -p, --tree-parent <column> parent to specify child-parent relation\n"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: text-utils/column.c:777
+#, fuzzy
+msgid " -c, --output-width <width> width of output in number of characters\n"
+msgstr " -o, --options <optstring> 短選項為辨識的\n"
+
+#: text-utils/column.c:778
+msgid " -o, --output-separator <string> columns separator for table output (default is two spaces)\n"
+msgstr ""
+
+#: text-utils/column.c:779
+msgid " -s, --separator <string> possible table delimiters\n"
+msgstr ""
+
+#: text-utils/column.c:780
+#, fuzzy
+msgid " -x, --fillrows fill rows before columns\n"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: text-utils/column.c:861
+#, fuzzy
+msgid "invalid columns argument"
+msgstr "無效的欄位引數"
+
+#: text-utils/column.c:887
+#, fuzzy
+msgid "invalid columns limit argument"
+msgstr "無效的欄位引數"
+
+#: text-utils/column.c:889
+msgid "columns limit must be greater than zero"
+msgstr ""
+
+#: text-utils/column.c:892
+#, fuzzy
+msgid "failed to parse column names"
+msgstr "剖析掛載表時失敗"
+
+#: text-utils/column.c:919
+#, fuzzy
+msgid "failed to use input separator"
+msgstr "配置迭代器時失敗"
+
+#: text-utils/column.c:952
+msgid "options --tree-id and --tree-parent are required for tree formatting"
+msgstr ""
+
+#: text-utils/column.c:960
+msgid "option --table required for all --table-*"
+msgstr ""
+
+#: text-utils/column.c:963
+msgid "option --table-columns or --table-column required for --json"
+msgstr ""
+
+#: text-utils/hexdump.c:162 text-utils/more.c:237
+#, fuzzy, c-format
+msgid " %s [options] <file>...\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: text-utils/hexdump.c:165
+msgid "Display file contents in hexadecimal, decimal, octal, or ascii.\n"
+msgstr ""
+
+#: text-utils/hexdump.c:168
+msgid " -b, --one-byte-octal one-byte octal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:169
+msgid " -c, --one-byte-char one-byte character display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:170
+msgid " -C, --canonical canonical hex+ASCII display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:171
+msgid " -d, --two-bytes-decimal two-byte decimal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:172
+msgid " -o, --two-bytes-octal two-byte octal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:173
+msgid " -x, --two-bytes-hex two-byte hexadecimal display\n"
+msgstr ""
+
+#: text-utils/hexdump.c:174
+msgid " -L, --color[=<mode>] interpret color formatting specifiers\n"
+msgstr ""
+
+#: text-utils/hexdump.c:177
+msgid " -e, --format <format> format string to be used for displaying data\n"
+msgstr ""
+
+#: text-utils/hexdump.c:178
+msgid " -f, --format-file <file> file that contains format strings\n"
+msgstr ""
+
+#: text-utils/hexdump.c:179
+msgid " -n, --length <length> interpret only length bytes of input\n"
+msgstr ""
+
+#: text-utils/hexdump.c:180
+msgid " -s, --skip <offset> skip offset bytes from the beginning\n"
+msgstr ""
+
+#: text-utils/hexdump.c:181
+#, fuzzy
+msgid " -v, --no-squeezing output identical lines\n"
+msgstr " -u --unlock 移除鎖定\n"
+
+#: text-utils/hexdump.c:187
+msgid "<length> and <offset>"
+msgstr ""
+
+#: text-utils/hexdump-display.c:366
+#, fuzzy
+msgid "all input file arguments failed"
+msgstr "所有輸入檔案引數失敗"
+
+#: text-utils/hexdump-parse.c:55
+#, fuzzy, c-format
+msgid "bad byte count for conversion character %s"
+msgstr "不當的位元組計數用於轉換字元 %s"
+
+#: text-utils/hexdump-parse.c:60
+#, fuzzy, c-format
+msgid "%%s requires a precision or a byte count"
+msgstr "%%s 需要精確度或位元組計數"
+
+#: text-utils/hexdump-parse.c:65
+#, fuzzy, c-format
+msgid "bad format {%s}"
+msgstr "不當的格式 {%s}"
+
+#: text-utils/hexdump-parse.c:70
+#, fuzzy, c-format
+msgid "bad conversion character %%%s"
+msgstr "不當的轉換字元 %%%s"
+
+#: text-utils/hexdump-parse.c:440
+#, fuzzy
+msgid "byte count with multiple conversion characters"
+msgstr "位元組計數與多重轉換字元"
+
+#: text-utils/line.c:34
+msgid "Read one line.\n"
+msgstr ""
+
+#: text-utils/more.c:240
+msgid "Display the contents of a file in a terminal."
+msgstr ""
+
+#: text-utils/more.c:243
+#, fuzzy
+msgid " -d, --silent display help instead of ringing bell"
+msgstr " -h 顯示這份說明然後離開\n"
+
+#: text-utils/more.c:244
+#, fuzzy
+msgid " -f, --logical count logical rather than screen lines"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/more.c:245
+#, fuzzy
+msgid " -l, --no-pause suppress pause after form feed"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: text-utils/more.c:246
+#, fuzzy
+msgid " -c, --print-over do not scroll, display text and clean line ends"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/more.c:247
+#, fuzzy
+msgid " -p, --clean-print do not scroll, clean screen and display text"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: text-utils/more.c:248
+msgid " -e, --exit-on-eof exit on end-of-file"
+msgstr ""
+
+#: text-utils/more.c:249
+#, fuzzy
+msgid " -s, --squeeze squeeze multiple blank lines into one"
+msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#: text-utils/more.c:250
+#, fuzzy
+msgid " -u, --plain suppress underlining and bold"
+msgstr " -i, --irq <num> 指定並列埠 irq\n"
+
+#: text-utils/more.c:251
+#, fuzzy
+msgid " -n, --lines <number> the number of lines per screenful"
+msgstr " -number 列各頁面\n"
+
+#: text-utils/more.c:252
+#, fuzzy
+msgid " -<number> same as --lines"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: text-utils/more.c:253
+#, fuzzy
+msgid " +<number> display file beginning from line number"
+msgstr " -v, --verbose 是更多詳細的\n"
+
+#: text-utils/more.c:254
+msgid " +/<pattern> display file beginning from pattern match"
+msgstr ""
+
+#: text-utils/more.c:357
+#, fuzzy
+msgid "MORE environment variable"
+msgstr "設定 %s 資源限制時失敗"
+
+#: text-utils/more.c:410
+#, fuzzy
+msgid "magic failed"
+msgstr "mkdir 失敗：%s"
+
+#: text-utils/more.c:414 text-utils/more.c:433
+#, c-format
+msgid ""
+"\n"
+"******** %s: Not a text file ********\n"
+"\n"
+msgstr ""
+"\n"
+"******** %s: 不是文字檔 ********\n"
+"\n"
+
+#: text-utils/more.c:467
+#, c-format
+msgid ""
+"\n"
+"*** %s: directory ***\n"
+"\n"
+msgstr ""
+"\n"
+"*** %s: 目錄 ***\n"
+"\n"
+
+#: text-utils/more.c:729
+#, c-format
+msgid "--More--"
+msgstr "--更多--"
+
+#: text-utils/more.c:731
+#, c-format
+msgid "(Next file: %s)"
+msgstr "(下一個檔案：%s)"
+
+#: text-utils/more.c:736 text-utils/more.c:742
+#, c-format
+msgid "(END)"
+msgstr ""
+
+#: text-utils/more.c:747
+#, c-format
+msgid "[Press space to continue, 'q' to quit.]"
+msgstr "[按下空格以繼續，「q」表示離開。]"
+
+#: text-utils/more.c:949
+msgid ""
+"\n"
+"...Skipping "
+msgstr ""
+"\n"
+"...跳過 "
+
+#: text-utils/more.c:953
+msgid "...Skipping to file "
+msgstr "…跳到檔案 "
+
+#: text-utils/more.c:955
+msgid "...Skipping back to file "
+msgstr "…跳回檔案 "
+
+#: text-utils/more.c:1117
+msgid "Line too long"
+msgstr "列太長"
+
+#: text-utils/more.c:1160
+msgid "No previous command to substitute for"
+msgstr "沒有前一個命令可用於替代"
+
+#: text-utils/more.c:1189
+#, c-format
+msgid "[Use q or Q to quit]"
+msgstr "[使用 q 或 Q 以離開]"
+
+#: text-utils/more.c:1275
+msgid "exec failed\n"
+msgstr "執行時失敗\n"
+
+#: text-utils/more.c:1285
+msgid "can't fork\n"
+msgstr "無法衍生執行\n"
+
+#: text-utils/more.c:1441
+msgid "...skipping\n"
+msgstr "…跳過\n"
+
+#: text-utils/more.c:1478
+msgid ""
+"\n"
+"Pattern not found\n"
+msgstr ""
+"\n"
+"找不到相符的式樣\n"
+
+#: text-utils/more.c:1482 text-utils/pg.c:1032 text-utils/pg.c:1180
+msgid "Pattern not found"
+msgstr "找不到相符的式樣"
+
+#: text-utils/more.c:1500
+#, fuzzy
+msgid ""
+"Most commands optionally preceded by integer argument k. Defaults in brackets.\n"
+"Star (*) indicates argument becomes new default.\n"
+msgstr ""
+"\n"
+"大部分命令可選用前導的整數引數 k。預設值位於中括號內。\n"
+"星號 (*) 用來指定引數成為新的預設值。\n"
+
+#: text-utils/more.c:1506
+#, fuzzy, c-format
+msgid ""
+"<space> Display next k lines of text [current screen size]\n"
+"z Display next k lines of text [current screen size]*\n"
+"<return> Display next k lines of text [1]*\n"
+"d or ctrl-D Scroll k lines [current scroll size, initially 11]*\n"
+"q or Q or <interrupt> Exit from more\n"
+"s Skip forward k lines of text [1]\n"
+"f Skip forward k screenfuls of text [1]\n"
+"b or ctrl-B Skip backwards k screenfuls of text [1]\n"
+"' Go to place where previous search started\n"
+"= Display current line number\n"
+"/<regular expression> Search for kth occurrence of regular expression [1]\n"
+"n Search for kth occurrence of last r.e [1]\n"
+"!<cmd> or :!<cmd> Execute <cmd> in a subshell\n"
+"v Start up '%s' at current line\n"
+"ctrl-L Redraw screen\n"
+":n Go to kth next file [1]\n"
+":p Go to kth previous file [1]\n"
+":f Display current file name and line number\n"
+". Repeat previous command\n"
+msgstr ""
+"<space> 顯示下一組 k 列文字 [目前螢幕大小]\n"
+"z 顯示下一組 k 列文字 [目前螢幕大小]*\n"
+"<return> 顯示下一組 k 列文字 [1]*\n"
+"d 或 ctrl-D 捲動 k 列 [目前捲動大小，初始值 11]*\n"
+"q 或 Q 或 <interrupt> 離開 more\n"
+"s 向前跳過 k 列文字 [1]\n"
+"f 向前跳過 k 全螢幕的文字 [1]\n"
+"b 或 ctrl-B 向後跳過 k 全螢幕的文字 [1]\n"
+"' 前往前一個搜尋開始的位置\n"
+"= 顯示目前列號\n"
+"/<正規表示式> 搜尋第 k 個出現的正規表示式 [1]\n"
+"n 搜尋第 k 個出現的倒數正規表示式 [1]\n"
+"!<cmd> 或 :!<cmd> 在 subshell 中執行 <cmd>\n"
+"v 在當前列上啟動 /usr/bin/vi\n"
+"ctrl-L 重繪螢幕\n"
+":n 前往後面第 k 個檔案 [1]\n"
+":p 前往前面第 k 個檔案 [1]\n"
+":f 顯示目前檔案名稱和列號\n"
+". 重複前一個命令\n"
+
+#: text-utils/more.c:1572
+#, fuzzy, c-format
+msgid "...back %d page"
+msgid_plural "...back %d pages"
+msgstr[0] "…倒退 %d 頁"
+
+#: text-utils/more.c:1596
+#, fuzzy, c-format
+msgid "...skipping %d line"
+msgid_plural "...skipping %d lines"
+msgstr[0] "…跳過 %d 列"
+
+#: text-utils/more.c:1696
+msgid ""
+"\n"
+"***Back***\n"
+"\n"
+msgstr ""
+"\n"
+"***倒退***\n"
+"\n"
+
+#: text-utils/more.c:1715
+#, c-format
+msgid "\"%s\" line %d"
+msgstr "「%s」第 %d 列"
+
+#: text-utils/more.c:1718
+#, c-format
+msgid "[Not a file] line %d"
+msgstr "[非檔案] 第 %d 列"
+
+#: text-utils/more.c:1724
+#, fuzzy
+msgid "No previous regular expression"
+msgstr "沒有前一個正規表示式"
+
+#: text-utils/more.c:1793
+#, c-format
+msgid "[Press 'h' for instructions.]"
+msgstr "[按下「h」列出指令。]"
+
+#: text-utils/pg.c:152
+#, fuzzy
+msgid ""
+"-------------------------------------------------------\n"
+" h this screen\n"
+" q or Q quit program\n"
+" <newline> next page\n"
+" f skip a page forward\n"
+" d or ^D next halfpage\n"
+" l next line\n"
+" $ last page\n"
+" /regex/ search forward for regex\n"
+" ?regex? or ^regex^ search backward for regex\n"
+" . or ^L redraw screen\n"
+" w or z set page size and go to next page\n"
+" s filename save current file to filename\n"
+" !command shell escape\n"
+" p go to previous file\n"
+" n go to next file\n"
+"\n"
+"Many commands accept preceding numbers, for example:\n"
+"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first page).\n"
+"\n"
+"See pg(1) for more information.\n"
+"-------------------------------------------------------\n"
+msgstr ""
+"-------------------------------------------------------\n"
+" h 這個螢幕\n"
+" q 或 Q 離開程式\n"
+" <newline> 下一頁\n"
+" f 跳過頁面轉寄\n"
+" d 或 ^D 下一個 halfpage\n"
+" l 下一個列\n"
+" $ 最後一頁\n"
+" /regex/ 搜尋轉寄用於 regex\n"
+" ？regex？或 ^ regex ^ 向後搜尋用於 regex\n"
+" .或 ^L 重繪螢幕\n"
+" w 或 z 設定頁面大小並前往下一頁\n"
+" s 檔名 儲存目前的檔案到檔名\n"
+" ！命令 命令殼退出\n"
+" p 前往前一個檔案\n"
+" n 前往下一個檔案\n"
+"\n"
+"許多命令接受前繼數量，舉例來說：\n"
+"+1<新列字元>(下一頁)；-1< 新列字元>(上一頁)；1<新列字元>(第一頁)。\n"
+"\n"
+"參看 pg (1) 以獲得更多資訊。\n"
+"-------------------------------------------------------\n"
+
+#: text-utils/pg.c:231
+#, fuzzy, c-format
+msgid " %s [options] [+line] [+/pattern/] [files]\n"
+msgstr " %s [選項] [+列] [+/胚騰/] [檔案]\n"
+
+#: text-utils/pg.c:235
+msgid "Browse pagewise through text files.\n"
+msgstr ""
+
+#: text-utils/pg.c:238
+#, fuzzy
+msgid " -number lines per page\n"
+msgstr " -number 列各頁面\n"
+
+#: text-utils/pg.c:239
+#, fuzzy
+msgid " -c clear screen before displaying\n"
+msgstr " -c 清空螢幕之前顯示\n"
+
+#: text-utils/pg.c:240
+#, fuzzy
+msgid " -e do not pause at end of a file\n"
+msgstr " -e 不暫停於結束的檔案\n"
+
+#: text-utils/pg.c:241
+#, fuzzy
+msgid " -f do not split long lines\n"
+msgstr " -f 不分割長列\n"
+
+#: text-utils/pg.c:242
+#, fuzzy
+msgid " -n terminate command with new line\n"
+msgstr " -n 終止命令與換列\n"
+
+#: text-utils/pg.c:243
+#, fuzzy
+msgid " -p <prompt> specify prompt\n"
+msgstr " -p <prompt> 指定提示\n"
+
+#: text-utils/pg.c:244
+#, fuzzy
+msgid " -r disallow shell escape\n"
+msgstr " -r disallow 命令殼退出\n"
+
+#: text-utils/pg.c:245
+#, fuzzy
+msgid " -s print messages to stdout\n"
+msgstr " -s 列印訊息到標準輸出\n"
+
+#: text-utils/pg.c:246
+#, fuzzy
+msgid " +number start at the given line\n"
+msgstr "+數字 開始於給定的列\n"
+
+#: text-utils/pg.c:247
+#, fuzzy
+msgid " +/pattern/ start at the line containing pattern\n"
+msgstr "+/胚騰/ 開始於列包含胚騰\n"
+
+#: text-utils/pg.c:258
+#, fuzzy, c-format
+msgid "option requires an argument -- %s"
+msgstr "%s：選項需要一個引數 -- %s\n"
+
+#: text-utils/pg.c:264
+#, fuzzy, c-format
+msgid "illegal option -- %s"
+msgstr "%s：不合法的選項 -- %s\n"
+
+#: text-utils/pg.c:366
+msgid "...skipping forward\n"
+msgstr "…向前跳過\n"
+
+#: text-utils/pg.c:368
+msgid "...skipping backward\n"
+msgstr "…向後跳過\n"
+
+#: text-utils/pg.c:384
+msgid "No next file"
+msgstr "沒有下個檔案"
+
+#: text-utils/pg.c:388
+msgid "No previous file"
+msgstr "沒有上個檔案"
+
+#: text-utils/pg.c:887
+#, fuzzy, c-format
+msgid "Read error from %s file"
+msgstr "%s：從 %s 檔案讀取時錯誤\n"
+
+#: text-utils/pg.c:890
+#, fuzzy, c-format
+msgid "Unexpected EOF in %s file"
+msgstr "%s：在 %s 檔案中出現未預期的檔案結束\n"
+
+#: text-utils/pg.c:892
+#, fuzzy, c-format
+msgid "Unknown error in %s file"
+msgstr "%s：%s 檔案中發生不明錯誤\n"
+
+#: text-utils/pg.c:945
+#, fuzzy
+msgid "Cannot create temporary file"
+msgstr "%s：無法建立暫存檔\n"
+
+#: text-utils/pg.c:954 text-utils/pg.c:1121 text-utils/pg.c:1147
+msgid "RE error: "
+msgstr "正規表示式錯誤："
+
+#: text-utils/pg.c:1104
+msgid "(EOF)"
+msgstr "(檔案結束)"
+
+#: text-utils/pg.c:1129 text-utils/pg.c:1155
+msgid "No remembered search string"
+msgstr "沒有被記住的搜尋字串"
+
+#: text-utils/pg.c:1210
+#, fuzzy
+msgid "cannot open "
+msgstr "無法開啟 "
+
+#: text-utils/pg.c:1262
+msgid "saved"
+msgstr "已儲存"
+
+#: text-utils/pg.c:1352
+msgid ": !command not allowed in rflag mode.\n"
+msgstr "：!命令在 rflag 模式不允許。\n"
+
+#: text-utils/pg.c:1386
+msgid "fork() failed, try again later\n"
+msgstr "fork() 失敗，稍後再試\n"
+
+#: text-utils/pg.c:1474
+msgid "(Next file: "
+msgstr "(下個檔案："
+
+#: text-utils/pg.c:1540
+#, fuzzy, c-format
+msgid "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"
+msgstr "%s %s 著作權©2000-2001 Gunnar Ritter。版權所有。\n"
+
+#: text-utils/pg.c:1593 text-utils/pg.c:1666
+#, fuzzy
+msgid "failed to parse number of lines per page"
+msgstr "剖析列號的時失敗"
+
+#: text-utils/rev.c:75
+#, fuzzy, c-format
+msgid "Usage: %s [options] [file ...]\n"
+msgstr "用法：%s [選項] [檔案...]\n"
+
+#: text-utils/rev.c:79
+msgid "Reverse lines characterwise.\n"
+msgstr ""
+
+#: text-utils/ul.c:123
+#, fuzzy, c-format
+msgid " %s [options] [<file> ...]\n"
+msgstr " %s [選項] [<file>]\n"
+
+#: text-utils/ul.c:126
+msgid "Do underlining.\n"
+msgstr ""
+
+#: text-utils/ul.c:129
+msgid " -t, -T, --terminal TERMINAL override the TERM environment variable\n"
+msgstr ""
+
+#: text-utils/ul.c:130
+msgid " -i, --indicated underlining is indicated via a separate line\n"
+msgstr ""
+
+#: text-utils/ul.c:503
+#, fuzzy, c-format
+msgid "unknown escape sequence in input: %o, %o"
+msgstr "不明的退出序列在中輸入：%o，%o"
+
+#: text-utils/ul.c:618
+msgid "trouble reading terminfo"
+msgstr "讀取 terminfo 時出現問題"
+
+#: text-utils/ul.c:622
+#, fuzzy, c-format
+msgid "terminal `%s' is not known, defaulting to `dumb'"
+msgstr "終端機『%s』不是已知，預設到『dumb』"
+
+#, c-format
+#~ msgid "chown failed: %s"
+#~ msgstr "chown 失敗：%s"
+
+#, fuzzy, c-format
+#~ msgid "waitpid failed (%s)"
+#~ msgstr "waitpid 失敗 (%s)"
+
+#, fuzzy, c-format
+#~ msgid "Interrupted %s"
+#~ msgstr ""
+#~ "\n"
+#~ "發生插斷 %10.10s %5.5s\n"
+
+#, fuzzy
+#~ msgid " -u, --notruncate don't truncate text in columns\n"
+#~ msgstr " -n, --noparity 設定同位到無\n"
+
+#, fuzzy, c-format
+#~ msgid "%s: BLKZEROOUT ioctl failed"
+#~ msgstr "%s：FITRIM ioctl 失敗"
+
+#, fuzzy, c-format
+#~ msgid "%s: BLKSECDISCARD ioctl failed"
+#~ msgstr "%s：FITRIM ioctl 失敗"
+
+#, fuzzy, c-format
+#~ msgid "%s: BLKDISCARD ioctl failed"
+#~ msgstr "%s：FITRIM ioctl 失敗"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ " -a, --all mount all filesystems mentioned in fstab\n"
+#~ " -c, --no-canonicalize don't canonicalize paths\n"
+#~ " -f, --fake dry run; skip the mount(2) syscall\n"
+#~ " -F, --fork fork off for each device (use with -a)\n"
+#~ " -T, --fstab <path> alternative file to /etc/fstab\n"
+#~ msgstr ""
+#~ " -a, --all 掛載所有檔案系統提及的在中 fstab\n"
+#~ " -c, --no-canonicalize 不正則化路徑\n"
+#~ " -f, --fake 模擬測試；跳過掛載 (2) syscall\n"
+#~ " -F, --fork 衍生關閉用於每個裝置 (使用與 -a)\n"
+#~ " -T, --fstab <path> 替代方案檔案到/etc/fstab\n"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ " -o, --options <list> comma-separated list of mount options\n"
+#~ " -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
+#~ " -r, --read-only mount the filesystem read-only (same as -o ro)\n"
+#~ " -t, --types <list> limit the set of filesystem types\n"
+#~ msgstr ""
+#~ " -o, --options <list> 以逗號分隔的掛載選項清單的\n"
+#~ " -O, --test-opts<清單> 限制集合檔案系統 (使用與 -a)\n"
+#~ " -p, --pass-fd<num> 讀取密語從檔案描述符號\n"
+#~ " -r, --read-only 掛載檔案系統唯讀 (如同 -o ro)\n"
+#~ " -t, --types<清單> 限制集合檔案系統類型\n"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ "\n"
+#~ "Source:\n"
+#~ " -L, --label <label> synonym for LABEL=<label>\n"
+#~ " -U, --uuid <uuid> synonym for UUID=<uuid>\n"
+#~ " LABEL=<label> specifies device by filesystem label\n"
+#~ " UUID=<uuid> specifies device by filesystem UUID\n"
+#~ " PARTLABEL=<label> specifies device by partition label\n"
+#~ " PARTUUID=<uuid> specifies device by partition UUID\n"
+#~ " ID=<id> specifies device by udev hardware ID\n"
+#~ msgstr ""
+#~ "\n"
+#~ "來源：\n"
+#~ " -L, --label <label> 同義字用於標貼=<標貼>\n"
+#~ " -U, --uuid<uuid> 同義字用於 UUID=<uuid>\n"
+#~ " 標貼=<標貼> 指定裝置由檔案系統標貼\n"
+#~ " UUID=<uuid> 指定裝置由檔案系統 UUID\n"
+#~ " PARTLABEL=<標貼> 指定裝置由分割標貼\n"
+#~ " PARTUUID=<uuid> 指定裝置由分割 UUID\n"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ " <device> specifies device by path\n"
+#~ " <directory> mountpoint for bind mounts (see --bind/rbind)\n"
+#~ " <file> regular file for loopdev setup\n"
+#~ msgstr ""
+#~ " <device> 指定裝置由路徑\n"
+#~ "<目錄> mountpoint 用於繫結掛載 (參看 --bind/rbind)\n"
+#~ "<檔案> 標準檔案用於 loopdev 設定\n"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ "\n"
+#~ "Operations:\n"
+#~ " -B, --bind mount a subtree somewhere else (same as -o bind)\n"
+#~ " -M, --move move a subtree to some other place\n"
+#~ " -R, --rbind mount a subtree and all submounts somewhere else\n"
+#~ msgstr ""
+#~ "\n"
+#~ "計算：\n"
+#~ " -B, --bind 掛載子樹其他地方 (如同 -o 繫結)\n"
+#~ " -M, --move 移動子樹到某些其他置放\n"
+#~ " -R, --rbind 掛載子樹和所有 submounts 其他地方\n"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ " --make-shared mark a subtree as shared\n"
+#~ " --make-slave mark a subtree as slave\n"
+#~ " --make-private mark a subtree as private\n"
+#~ " --make-unbindable mark a subtree as unbindable\n"
+#~ msgstr ""
+#~ " --make-shared 標記子樹做為共享\n"
+#~ " --make-slave 標記子樹做為從屬\n"
+#~ " --make-private 標記子樹做為私人的\n"
+#~ " --make-unbindable 標記子樹做為 unbindable\n"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ " --make-rshared recursively mark a whole subtree as shared\n"
+#~ " --make-rslave recursively mark a whole subtree as slave\n"
+#~ " --make-rprivate recursively mark a whole subtree as private\n"
+#~ " --make-runbindable recursively mark a whole subtree as unbindable\n"
+#~ msgstr ""
+#~ " --make-rshared 遞迴標記整個子樹做為共享\n"
+#~ " --make-rslave 遞迴標記整個子樹做為從屬\n"
+#~ " --make-rprivate 遞迴標記整個子樹做為私人的\n"
+#~ " --make-runbindable 遞迴標記整個子樹做為 unbindable\n"
+
+#, fuzzy
+#~ msgid "failed to cache size"
+#~ msgstr "剖析大小時失敗"
+
+#, fuzzy
+#~ msgid "child kill failed"
+#~ msgstr "識別號失敗"
+
+#, fuzzy, c-format
+#~ msgid "Comparing %s to %s"
+#~ msgstr ""
+#~ "\n"
+#~ "%d 分割區：\n"
+
+#, fuzzy, c-format
+#~ msgid "Visiting %s (file %zu)"
+#~ msgstr "關閉 %s 失敗"
+
+#, fuzzy
+#~ msgid " -v, --verbose display more details"
+#~ msgstr " -v, --verbose 列印詳細的資料\n"
+
+#, fuzzy, c-format
+#~ msgid " %s [options] COMMAND\n"
+#~ msgstr " %s [選項] 命令\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "General Options:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "一般選項：\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Resources Options:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "資源選項：\n"
+
+#, fuzzy, c-format
+#~ msgid "cannot stat %s"
+#~ msgstr "無法識別「%s」狀態"
+
+#, fuzzy
+#~ msgid "pipe failed"
+#~ msgstr "openpty 失敗"
+
+#, fuzzy
+#~ msgid "Filename"
+#~ msgstr "檔名"
+
+#, fuzzy, c-format
+#~ msgid "umount %s failed"
+#~ msgstr "掛載失敗"
+
+#, fuzzy, c-format
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -c, --check check bad blocks before creating the swap area\n"
+#~ " -f, --force allow swap size area be larger than device\n"
+#~ " -p, --pagesize SIZE specify page size in bytes\n"
+#~ " -L, --label LABEL specify label\n"
+#~ " -v, --swapversion NUM specify swap-space version number\n"
+#~ " -U, --uuid UUID specify the uuid to use\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -c, --check 檢查不當的區塊之前建立交換區域\n"
+#~ " -f, --force 允許交換大小區域是大於裝置\n"
+#~ " -p, --pagesize 大小 指定頁面大小在中位元組\n"
+#~ " -L, --label 標貼 指定標貼\n"
+#~ " -v, --swapversion NUM 指定交換空間版本編號\n"
+#~ " -U, --uuid UUID 指定 uuid 以使用\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#~ msgid "unable to matchpathcon()"
+#~ msgstr "無法 matchpathcon()"
+
+#, fuzzy, c-format
+#~ msgid "Directories: %9lld\n"
+#~ msgstr "已交換記憶體頁 %ld\n"
+
+#, fuzzy
+#~ msgid " -v, --verbose print summary after hardlinking"
+#~ msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#, fuzzy
+#~ msgid " -vv print every hardlinked file and summary"
+#~ msgstr " -r, --reset 重置通訊埠\n"
+
+#, fuzzy
+#~ msgid " -f, --force force hardlinking across filesystems"
+#~ msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+
+#, fuzzy
+#~ msgid "integer overflow"
+#~ msgstr "內部錯誤"
+
+#, fuzzy, c-format
+#~ msgid "file %s changed underneath us"
+#~ msgstr "變更目錄到 %s 時失敗"
+
+#, fuzzy, c-format
+#~ msgid "failed to remove temporary link %s"
+#~ msgstr "移除分割時失敗"
+
+#, fuzzy, c-format
+#~ msgid " %s %s to %s\n"
+#~ msgstr "%s：掛載的於 %s"
+
+#, fuzzy, c-format
+#~ msgid "pattern error at offset %d: %s"
+#~ msgstr "剖析錯誤發生於列號："
+
+#, fuzzy, c-format
+#~ msgid "Skipping %s%s\n"
+#~ msgstr ""
+#~ "\n"
+#~ "...跳過 "
+
+#, fuzzy
+#~ msgid "--reset-on-fork option is supported for SCHED_FIFO and SCHED_RR policies only"
+#~ msgstr "SCHED_RESET_ON_FORK 旗標只被支援用於 SCHED_FIFO 和 SCHED_RR 策略"
+
+#~ msgid "CPU MHz:"
+#~ msgstr "CPU MHz："
+
+#, fuzzy, c-format
+#~ msgid "failed on line %d"
+#~ msgstr "取消連結 %s 時失敗"
+
+#, fuzzy
+#~ msgid "Input line too long."
+#~ msgstr "輸入列太長。"
+
+#, fuzzy, c-format
+#~ msgid "%s: failed to read partition start from sysfs"
+#~ msgstr "%s：無法讀取分割表"
+
+#, fuzzy
+#~ msgid "All logical partitions are in use. Adding a primary partition."
+#~ msgstr "所有邏輯分割區都在使用中\n"
+
+#, fuzzy, c-format
+#~ msgid "%s: BLKRESETZONE ioctl failed"
+#~ msgstr "%s：FITRIM ioctl 失敗"
+
+#, fuzzy
+#~ msgid " -a, --all trim all supported mounted filesystems\n"
+#~ msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#, fuzzy
+#~ msgid " -S, --setuid <uid>\t set uid in entered namespace\n"
+#~ msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#, fuzzy
+#~ msgid " -G, --setgid <gid>\t set gid in entered namespace\n"
+#~ msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#, fuzzy
+#~ msgid "options --map-root-user and --map-current-user are mutually exclusive"
+#~ msgstr "選項 --pid 和命令彼此互斥"
+
+#, fuzzy
+#~ msgid "options --setgroups=allow and --map-current-user are mutually exclusive"
+#~ msgstr "選項 --pid 和命令彼此互斥"
+
+#, fuzzy, c-format
+#~ msgid "unknown option -%s"
+#~ msgstr "不明選項 -%s"
+
+#~ msgid " Overflow\n"
+#~ msgstr " 溢位\n"
+
+#, fuzzy
+#~ msgid "Rufus alignment"
+#~ msgstr "第一個引數"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Do you really want to quit? "
+#~ msgstr "您真的要離開嗎？"
+
+#, fuzzy
+#~ msgid ""
+#~ "usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
+#~ " -v be verbose\n"
+#~ " -E make all warnings errors (non-zero exit status)\n"
+#~ " -b blksize use this blocksize, must equal page size\n"
+#~ " -e edition set edition number (part of fsid)\n"
+#~ " -N endian set cramfs endianness (big|little|host), default host\n"
+#~ " -i file insert a file image into the filesystem\n"
+#~ " -n name set name of cramfs filesystem\n"
+#~ " -p pad by %d bytes for boot code\n"
+#~ " -s sort directory entries (old option, ignored)\n"
+#~ " -z make explicit holes\n"
+#~ " dirname root of the filesystem to be compressed\n"
+#~ " outfile output file\n"
+#~ msgstr ""
+#~ "用法：%s [-h] [-v] [-b 區塊大小] [-e 編次] [-N 尾序] [-i 檔案] [-n 名稱] dirname outfile\n"
+#~ " -h 印出這個說明\n"
+#~ " -v 詳細訊息\n"
+#~ " -E 所有警告視為錯誤 (非零結束狀態)\n"
+#~ " -b 區塊大小 使用這個區塊大小，必須等於頁面大小\n"
+#~ " -e 編次 設定編次數字 (部分的 fsid)\n"
+#~ " -N 尾序 設定 cramfs 尾序 (大|小|主機)，預設依主機\n"
+#~ " -i 檔案 插入檔案影像到檔案系統 (需求 >= 2.4.0)\n"
+#~ " -n 名稱 設定 cramfs 檔案系統的名稱\n"
+#~ " -p 填充 %d 位元組於開機碼\n"
+#~ " -s 排序目錄項目 (舊選項，忽略)\n"
+#~ " -z 製作明確的空洞 (需求 >= 2.3.39)\n"
+#~ " dirname 壓縮的檔案系統根目錄\n"
+#~ " outfile 輸出檔案\n"
+
+#, fuzzy
+#~ msgid "user %s does not exist"
+#~ msgstr "使用者 %s 不存在"
+
+#, fuzzy
+#~ msgid "only root can use \"--%s\" option (effective UID is %u)"
+#~ msgstr "只有根可以使用「--%s」選項 (有效 UID 是 %u)"
+
+#, fuzzy
+#~ msgid "only root can do that (effective UID is %u)"
+#~ msgstr "只有根可以那樣做 (有效 UID 是 %u)"
+
+#, fuzzy
+#~ msgid "only root can use \"--%s\" option"
+#~ msgstr "只有根可以使用「--%s」選項"
+
+#, fuzzy
+#~ msgid "only root can do that"
+#~ msgstr "只有根可以那樣做"
+
+#, fuzzy
+#~ msgid ""
+#~ " -a, --append append the output\n"
+#~ " -c, --command <command> run command rather than interactive shell\n"
+#~ " -e, --return return exit code of the child process\n"
+#~ " -f, --flush run flush after each write\n"
+#~ " --force use output file even when it is a link\n"
+#~ " -o, --output-limit <size> terminate if output files exceed size\n"
+#~ " -q, --quiet be quiet\n"
+#~ " -t[<file>], --timing[=<file>] output timing data to stderr or to FILE\n"
+#~ msgstr ""
+#~ " -a, --append 附加輸出\n"
+#~ " -c, --command <command> 運行命令而非互動式命令殼\n"
+#~ " -e, --return 回傳離開代碼的子行程\n"
+#~ " -f, --flush 運行清理之後每個寫入\n"
+#~ " --force 使用輸出檔案甚至時它是鏈結\n"
+#~ " -q, --quiet 是安靜的\n"
+#~ " -t, --timing [=<檔案>] 輸出時機資料到標準勘誤 (或到檔案)\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "cannot write script file"
+#~ msgstr "無法寫入指令稿檔案"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Session terminated.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "作業階段終止，killing 命令殼…"
+
+#, fuzzy
+#~ msgid "openpty failed"
+#~ msgstr "openpty 失敗"
+
+#, fuzzy
+#~ msgid "out of pty's"
+#~ msgstr "發信匣的 pty's"
+
+#~ msgid "Script started, file is %s\n"
+#~ msgstr "命令稿已啟動，檔案是 %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -t, --timing <file> script timing output file\n"
+#~ " -s, --typescript <file> script terminal session output file\n"
+#~ " -d, --divisor <num> speed up or slow down execution with time divisor\n"
+#~ " -m, --maxdelay <num> wait at most this many seconds between updates\n"
+#~ msgstr ""
+#~ " -t, --timing <file> 指令稿時機輸出檔案\n"
+#~ " -s, --typescript<檔案>指令稿終端機作業階段輸出檔案\n"
+#~ " -d, --divisor<num> 加速或拖慢執行與時間除數\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#~ msgid "write to stdout failed"
+#~ msgstr "寫入標準輸出時失敗"
+
+#~ msgid "failed to read typescript file %s"
+#~ msgstr "讀取 typescript 檔案 %s 時失敗"
+
+#, fuzzy
+#~ msgid "wrong number of arguments"
+#~ msgstr "錯誤的引數數量"
+
+#~ msgid "failed to read timing file %s"
+#~ msgstr "讀取時序檔案 %s 時失敗"
+
+#, fuzzy
+#~ msgid "timing file %s: line %lu: unexpected format"
+#~ msgstr "時序檔案 %s：%lu：未預期的格式"
+
+#, fuzzy
+#~ msgid "ttyname failed"
+#~ msgstr "ttyname 失敗"
+
+#, fuzzy
+#~ msgid "incorrect password"
+#~ msgstr "不正確密碼"
+
+#, fuzzy
+#~ msgid "cannot get tty name"
+#~ msgstr "無法提取 tty 名稱"
+
+#, fuzzy
+#~ msgid "%15s: %s"
+#~ msgstr "磁碟：%.*s\n"
+
+#, fuzzy
+#~ msgid "failed to parse CPU list %s"
+#~ msgstr "剖析 CPU 清單 %s 時失敗"
+
+#~ msgid "failed to parse CPU mask %s"
+#~ msgstr "剖析 CPU 遮罩 %s 時失敗"
+
+#, fuzzy
+#~ msgid "%s %04d"
+#~ msgstr "%s %d"
+
+#, fuzzy
+#~ msgid "%s: failed to compose sysfs path"
+#~ msgstr "撰寫 sysfs 路徑用於 %s 時失敗"
+
+#, fuzzy
+#~ msgid "%s: failed to read link"
+#~ msgstr "%s：無法讀取鏈結"
+
+#, fuzzy
+#~ msgid "%s - No such file or directory\n"
+#~ msgstr "%s - 沒有此類檔案或目錄\n"
+
+#, fuzzy
+#~ msgid "%s: %s."
+#~ msgstr "磁碟：%.*s\n"
+
+#~ msgid "Geometry"
+#~ msgstr "結構"
+
+#, fuzzy
+#~ msgid "kind of lock: FL_FLOCK or FL_POSIX."
+#~ msgstr "kind 的鎖定：FL_FLOCK 或 FL_POSIX。"
+
+#, fuzzy
+#~ msgid "unable to exec /bin/umount of `%s'"
+#~ msgstr "無法 exec/bin/umount 的『%s』"
+
+#, fuzzy
+#~ msgid " -D, --debug display more details"
+#~ msgstr " -v, --verbose 列印詳細的資料\n"
+
+#, fuzzy
+#~ msgid "failed to read from: %s"
+#~ msgstr "讀取時失敗：%s"
+
+#, fuzzy
+#~ msgid "cannot execute: %s"
+#~ msgstr "無法寫入 %s"
+
+#, fuzzy
+#~ msgid "unsupported algorithm: %s"
+#~ msgstr "不受支援的引數：%s"
+
+#, fuzzy
+#~ msgid ""
+#~ "Test mode: %s was not updated with:\n"
+#~ "%s"
+#~ msgstr "裝置 %s 未與 %s 有所關聯\n"
+
+#~ msgid "Could not open file with the clock adjustment parameters in it (%s) for writing"
+#~ msgstr "無法以其中的時鐘調整參數 (%s) 開啟檔案用於寫入"
+
+#~ msgid "Could not update file with the clock adjustment parameters (%s) in it"
+#~ msgstr "無法以其中的時鐘調整參數 (%s) 更新檔案"
+
+#, fuzzy
+#~ msgid "Drift adjustment parameters not updated."
+#~ msgstr "漂移調整參數無法更新。"
+
+#, fuzzy
+#~ msgid "Test mode: epoch was not set to %s.\n"
+#~ msgstr "大小的交換區域"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %1$s -V\n"
+#~ " %1$s --report [devices]\n"
+#~ " %1$s [-v|-q] commands devices\n"
+#~ "\n"
+#~ "Available commands:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %1$s -V\n"
+#~ " %1$s --report [裝置]\n"
+#~ " %1$s [-v|-q] 命令裝置\n"
+#~ "\n"
+#~ "可用命令：\n"
+
+#, fuzzy
+#~ msgid "seek error on %s"
+#~ msgstr "尋指錯誤於 %s"
+
+#, fuzzy
+#~ msgid ""
+#~ " -V, --version display version information and exit;\n"
+#~ " -V as --version must be the only option\n"
+#~ msgstr ""
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid " -h, --help display this help text and exit\n"
+#~ msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for --show, --raw or --pairs):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --show，--raw 或 --pairs)：\n"
+
+#, fuzzy
+#~ msgid " -v, --version output version information and exit\n"
+#~ msgstr " -v, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "Try '%s -h' for more information.\n"
+#~ msgstr "嘗試『%s --help』以獲得更多資訊。\n"
+
+#, fuzzy
+#~ msgid " -h, --help display this help and exit\n"
+#~ msgstr " -h, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid " -V, --version output version information and exit\n"
+#~ msgstr " -V, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid " -u, --help display this help and exit\n"
+#~ msgstr " -u, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid "No known shells."
+#~ msgstr "沒有已知命令殼。"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位：\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for --output):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --output)：\n"
+
+#, fuzzy
+#~ msgid "Try `%s --help' for more information.\n"
+#~ msgstr "嘗試『%s --help』以獲得更多資訊。\n"
+
+#, fuzzy
+#~ msgid " -v, --verbose explain what is being done\n"
+#~ msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -r, --random generate random-based uuid\n"
+#~ " -t, --time generate time-based uuid\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -r, --random 產生 random-based uuid\n"
+#~ " -t, --time 產生 time-based uuid\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -a, --all wipe all magic strings (BE CAREFUL!)\n"
+#~ " -b, --backup create a signature backup in $HOME\n"
+#~ " -f, --force force erasure\n"
+#~ " -h, --help show this help text\n"
+#~ " -n, --no-act do everything except the actual write() call\n"
+#~ " -o, --offset <num> offset to erase, in bytes\n"
+#~ " -p, --parsable print out in parsable instead of printable format\n"
+#~ " -q, --quiet suppress output messages\n"
+#~ " -t, --types <list> limit the set of filesystem, RAIDs or partition tables\n"
+#~ " -V, --version output version information and exit\n"
+#~ msgstr ""
+#~ " -a, --all 撥所有魔術字串 (請小心 !)\n"
+#~ " -h, --help 顯示這份說明文字\n"
+#~ " -n, --no-act 做所有東西除了實際的寫入() 呼叫\n"
+#~ " -o, --offset <num> 偏移到清除，在中位元組\n"
+#~ " -p, --parsable 印出在中 parsable 以代替可列印格式\n"
+#~ " -q, --quiet 抑制輸出訊息\n"
+#~ " -t, --types<清單> 限制集合檔案系統，RAIDs 或分割表\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095)."
+#~ msgstr "硬體鐘訊暫存器包含值所還是無效的(例如：50 th 月中某日) 或位於之後範圍我們可以控柄(例如：年 2095)。"
+
+#, fuzzy
+#~ msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it."
+#~ msgstr "硬體時鐘不包含有效時間，因而我們無法設定系統時間從它。"
+
+#~ msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
+#~ msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
+
+#~ msgid "\ttz.tz_minuteswest = %d\n"
+#~ msgstr "\ttz.tz_minuteswest = %d\n"
+
+#, fuzzy
+#~ msgid "Must be superuser to set system clock."
+#~ msgstr "必須是系統管理者到設定系統時鐘。"
+
+#~ msgid "\tUTC: %s\n"
+#~ msgstr "\tUTC：%s\n"
+
+#~ msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n"
+#~ msgstr "無法調整偏差係數，因為之前的硬體時鐘包含了無用資料。\n"
+
+#, fuzzy
+#~ msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it."
+#~ msgstr "硬體時鐘不包含有效時間，因而我們無法調整它。"
+
+#~ msgid "At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
+#~ msgstr "1969 年之後 %ld 秒, RTC 預計會讀取 1969 之後 %ld 秒。\n"
+
+#, fuzzy
+#~ msgid "Unable to get the epoch value from the kernel."
+#~ msgstr "無法提取時期值從內核。"
+
+#~ msgid "Kernel is assuming an epoch value of %lu\n"
+#~ msgstr "內核假設時期值為 %lu\n"
+
+#, fuzzy
+#~ msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it."
+#~ msgstr "要設定時期值，您必須使用『時期』選項到告訴到什麼值到設定它。"
+
+#, fuzzy
+#~ msgid "Not setting the epoch to %lu - testing only.\n"
+#~ msgstr "不將時期設定為 %d - 只限於測試。\n"
+
+#~ msgid "Unable to set the epoch value in the kernel.\n"
+#~ msgstr "無法在內核中設定時期值。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -h, --help show this help text and exit\n"
+#~ " -r, --show read hardware clock and print result\n"
+#~ " --get read hardware clock and print drift corrected result\n"
+#~ " --set set the RTC to the time given with --date\n"
+#~ msgstr ""
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ " -r, --show 讀取硬體時鐘和列印結果\n"
+#~ " --set 設定 RTC 到時間給定的與 --date\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -s, --hctosys set the system time from the hardware clock\n"
+#~ " -w, --systohc set the hardware clock from the current system time\n"
+#~ " --systz set the system time based on the current timezone\n"
+#~ " --adjust adjust the RTC to account for systematic drift since\n"
+#~ " the clock was last set or adjusted\n"
+#~ msgstr ""
+#~ " -s, --hctosys 設定系統時間從硬體時鐘\n"
+#~ " -w, --systohc 設定硬體時鐘從目前的系統時間\n"
+#~ " --systz 設定系統時間基於目前的時區\n"
+#~ " --adjust 調整 RTC 到帳號用於 systematic 漂移自從\n"
+#~ " 時鐘是最後一筆設定或調整\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --getepoch print out the kernel's hardware clock epoch value\n"
+#~ " --setepoch set the kernel's hardware clock epoch value to the \n"
+#~ " value given with --epoch\n"
+#~ msgstr ""
+#~ " --getepoch 印出內核『s 硬體時鐘時期值\n"
+#~ " --setepoch 設定內核』s 硬體時鐘時期值到\n"
+#~ " 值給定的與 --epoch\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --predict predict RTC reading at time given with --date\n"
+#~ " -V, --version display version information and exit\n"
+#~ msgstr ""
+#~ " --predict 預測 RTC 讀取於時間給定的與 --date\n"
+#~ " -V, --version 顯示版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -u, --utc the hardware clock is kept in UTC\n"
+#~ " --localtime the hardware clock is kept in local time\n"
+#~ msgstr ""
+#~ " -u, --utc 硬體時鐘被保持在中 UTC\n"
+#~ " --localtime 硬體時鐘被保持在中本地時間\n"
+
+#, fuzzy
+#~ msgid " -f, --rtc <file> special /dev/... file to use instead of default\n"
+#~ msgstr " -f, --rtc <file> 特殊/dev/...檔案以使用以代替預設\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --update-drift update drift factor in %1$s (requires\n"
+#~ " --set or --systohc)\n"
+#~ " --noadjfile do not access %1$s; this requires the use of\n"
+#~ " either --utc or --localtime\n"
+#~ " --adjfile <file> specifies the path to the adjust file;\n"
+#~ " the default is %1$s\n"
+#~ msgstr ""
+#~ " --noadjfile 不存取 %s；這個需求使用的\n"
+#~ " 還是 --utc 或 --localtime\n"
+#~ " --adjfile <file> 指定路徑到調整檔案；\n"
+#~ " 預設是 %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " --test do not update anything, just show what would happen\n"
+#~ " -D, --debug debugging mode\n"
+#~ "\n"
+#~ msgstr ""
+#~ " --test 不更新任何事，僅顯示什麼會發生\n"
+#~ " -D, --debug 偵錯模式\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "invalid epoch argument"
+#~ msgstr "無效的時期引數"
+
+#~ msgid "%s does not have interrupt functions. "
+#~ msgstr "%s 沒有插斷函式。"
+
+#~ msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
+#~ msgstr "%s 的 ioctl() 打開更新插斷意外地失敗"
+
+#, fuzzy
+#~ msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file. This file does not exist on this system."
+#~ msgstr "要操控時期值在中內核，我們必須存取 Linux『rtc』裝置驅動程式透過裝置特殊檔案 %s。 這個檔案不存在於這個系統。"
+
+#, fuzzy
+#~ msgid "we have read epoch %lu from %s with RTC_EPOCH_READ ioctl.\n"
+#~ msgstr "我們已從具備 RTC_EPOCH_READ ioctl 的 %2$s 讀取了時期 %1$ld。\n"
+
+#, fuzzy
+#~ msgid "The epoch value may not be less than 1900. You requested %ld"
+#~ msgstr "時期值可能無法是少於 1900. 您要求的 %ld"
+
+#, fuzzy
+#~ msgid "setting epoch to %lu with RTC_EPOCH_SET ioctl to %s.\n"
+#~ msgstr "設定 epoch 到 %ld 以及 RTC_EPOCH_SET ioctl 到 %s。\n"
+
+#, fuzzy
+#~ msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
+#~ msgstr "內核裝置驅動程式用於 %s 沒有 RTC_EPOCH_SET ioctl。"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s\n"
+#~ "Try `%s --help' for more information."
+#~ msgstr ""
+#~ "%s\n"
+#~ "嘗試『%s --help』以獲得更多資訊。"
+
+#, fuzzy
+#~ msgid "Try `%s --help' for more information."
+#~ msgstr "嘗試『%s --help』以獲得更多資訊。"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Available columns (for --show):\n"
+#~ msgstr ""
+#~ "\n"
+#~ "可用欄位 (用於 --show)：\n"
+
+#, fuzzy
+#~ msgid " -T, --trust-irq <on|off> make driver to trust irq\n"
+#~ msgstr " -T, --trust-irq <on|off> 製作驅動程式到信賴 irq\n"
+
+#, fuzzy
+#~ msgid " --version show version information and exit\n"
+#~ msgstr " -V 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "failed to add data to output table"
+#~ msgstr "加入輸出列時失敗"
+
+#, fuzzy
+#~ msgid "failed to initialize output line"
+#~ msgstr "初始化輸出表格時失敗"
+
+#, fuzzy
+#~ msgid "%s: these options are mutually exclusive:"
+#~ msgstr "--nr 和 <partition> 彼此互斥"
+
+#, fuzzy
+#~ msgid " -m, --mtab search in table of mounted filesystems\n"
+#~ msgstr " -a, --all 列印所有符號，即使計數是 0\n"
+
+#~ msgid "Clock not changed - testing only.\n"
+#~ msgstr "時鐘未變更 - 只做為測試。\n"
+
+#, fuzzy
+#~ msgid "--date argument too long"
+#~ msgstr "--date 引數太長"
+
+#, fuzzy
+#~ msgid ""
+#~ "The value of the --date option is not a valid date.\n"
+#~ "In particular, it contains quotation marks."
+#~ msgstr ""
+#~ "值的 --date 選項並非有效日期。\n"
+#~ "尤其，它含有引號。"
+
+#~ msgid "Issuing date command: %s\n"
+#~ msgstr "執行日期命令：%s\n"
+
+#~ msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
+#~ msgstr "無法在 /bin/sh 命令殼中運行「date」程式。popen() 失敗"
+
+#~ msgid "response from date command = %s\n"
+#~ msgstr "日期命令的回應 = %s\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "The date command issued by %s returned unexpected results.\n"
+#~ "The command was:\n"
+#~ " %s\n"
+#~ "The response was:\n"
+#~ " %s"
+#~ msgstr ""
+#~ "日期命令議題的由 %s 回傳的未預期的結果。\n"
+#~ "命令是：\n"
+#~ " %s\n"
+#~ "回應是：\n"
+#~ " %s"
+
+#~ msgid ""
+#~ "The date command issued by %s returned something other than an integer where the converted time value was expected.\n"
+#~ "The command was:\n"
+#~ " %s\n"
+#~ "The response was:\n"
+#~ " %s\n"
+#~ msgstr ""
+#~ "由 %s 所執行的日期命令回傳了一些非整數的東西，而非預期己轉換的時間值。\n"
+#~ "命令是：\n"
+#~ " %s\n"
+#~ "回應是：\n"
+#~ "%s\n"
+
+#~ msgid "date string %s equates to %ld seconds since 1969.\n"
+#~ msgstr "日期字串 %s 表示自 1969 年以來己過 %ld 秒。\n"
+
+#~ msgid "Not setting system clock because running in test mode.\n"
+#~ msgstr "未設定系統時鐘，因為在測試模式中執行。\n"
+
+#~ msgid "Not updating adjtime file because of testing mode.\n"
+#~ msgstr "無法更新 adjtime 檔案，因為處於測試模式。\n"
+
+#~ msgid ""
+#~ "Would have written the following to %s:\n"
+#~ "%s"
+#~ msgstr ""
+#~ "將會寫入下列資料到 %s:\n"
+#~ "%s"
+
+#, fuzzy
+#~ msgid ""
+#~ "The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n"
+#~ "This copy of hwclock was built for a machine other than Alpha\n"
+#~ "(and thus is presumably not running on an Alpha now). No action taken."
+#~ msgstr ""
+#~ "內核保持時期值用於硬體時鐘只有於 Alpha 機器。\n"
+#~ "這個複製的 hwclock 是 built 用於機器不同於 Alpha\n"
+#~ "(和因而是據推測無法執行中於 Alpha 現在)。 未採取任何行動。"
+
+#, fuzzy
+#~ msgid ""
+#~ " --directisa access the ISA bus directly instead of %s\n"
+#~ " --badyear ignore RTC's year because the BIOS is broken\n"
+#~ " --date <time> specifies the time to which to set the hardware clock\n"
+#~ " --epoch <year> specifies the year which is the beginning of the\n"
+#~ " hardware clock's epoch value\n"
+#~ msgstr ""
+#~ " --directisa 存取 ISA 匯流排直接以代替 %s\n"
+#~ " --badyear 忽略 RTC's 年因為 BIOS 被不完整的\n"
+#~ " --date <time> 指定時間到該項到設定硬體時鐘\n"
+#~ " --epoch<年> 指定年該項是起始部分的\n"
+#~ " 硬體時鐘時期值\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
+#~ " tell hwclock the type of Alpha you have (see hwclock(8))\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -J|--jensen，-A|--arc，-S|--srm，-F|--funky-toy\n"
+#~ " 告訴 hwclock 型態的 Alpha 您有 (參看 hwclock (8))\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "Sorry, only the superuser can use the Hardware Clock."
+#~ msgstr "抱歉，只有系統管理者可以變更硬體時鐘。"
+
+#~ msgid "%s takes no non-option arguments. You supplied %d.\n"
+#~ msgstr "%s 無需非選項引數。 您卻已給定 %d。\n"
+
+#, fuzzy
+#~ msgid "No usable set-to time. Cannot set clock."
+#~ msgstr "沒有可用 set-to 時間。 無法設定時鐘。"
+
+#~ msgid "booted from MILO\n"
+#~ msgstr "從 MILO 開機\n"
+
+#~ msgid "Ruffian BCD clock\n"
+#~ msgstr "Ruffian BCD 時鐘\n"
+
+#~ msgid "clockport adjusted to 0x%x\n"
+#~ msgstr "時鐘通訊埠調整到 0x%x\n"
+
+#~ msgid "funky TOY!\n"
+#~ msgstr "畏縮的玩具！\n"
+
+#, fuzzy
+#~ msgid "atomic %s failed for 1000 iterations!"
+#~ msgstr "基元的 %s 失敗的用於 1000 反覆運算！"
+
+#, fuzzy
+#~ msgid "cmos_read(): write to control address %X failed"
+#~ msgstr "cmosread()(_R)：寫入控制位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "cmos_read(): read from data address %X failed"
+#~ msgstr "cmosread()(_R)：讀取資料位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "cmos_write(): write to control address %X failed"
+#~ msgstr "cmoswrite()(_W)：寫入控制位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "cmos_write(): write to data address %X failed"
+#~ msgstr "cmoswrite()(_W)：寫入資料位址 %X 失敗：%m\n"
+
+#, fuzzy
+#~ msgid "I failed to get permission because I didn't try."
+#~ msgstr "我無法提取權限因為我並未嘗試。"
+
+#, fuzzy
+#~ msgid "unable to get I/O port access: the iopl(3) call failed."
+#~ msgstr "無法提取 I/O 通訊埠存取： iopl (3) 呼叫失敗。"
+
+#~ msgid "Probably you need root privileges.\n"
+#~ msgstr "您大概需要系統管理者權限。\n"
+
+#, fuzzy
+#~ msgid "error: can not set signal handler"
+#~ msgstr "無法設定信號處理程式"
+
+#, fuzzy
+#~ msgid "error: can not restore signal handler"
+#~ msgstr "無法設定信號處理程式"
+
+#, fuzzy
+#~ msgid "only root can mount %s on %s"
+#~ msgstr "只有根可以掛載 %s 於 %s"
+
+#, fuzzy
+#~ msgid "%s is used as read only loop, mounting read-only"
+#~ msgstr "%s 被防止寫入的，掛載唯讀"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: more filesystems detected. This should not happen,\n"
+#~ " use -t <type> to explicitly specify the filesystem type or\n"
+#~ " use wipefs(8) to clean up the device."
+#~ msgstr ""
+#~ "掛載：%s：偵測到多個檔案系統。這不應發生，\n"
+#~ " 使用 -t <type> 以明確指定檔案系統型態或\n"
+#~ " 使用 wipefs(8) 以清理裝置。\n"
+
+#, fuzzy
+#~ msgid "I could not determine the filesystem type, and none was specified"
+#~ msgstr "我無法決定檔案系統型態，而無被指定的"
+
+#, fuzzy
+#~ msgid "you must specify the filesystem type"
+#~ msgstr "您必須指定檔案系統型態"
+
+#, fuzzy
+#~ msgid "%s: mount failed"
+#~ msgstr "%s：掛載失敗"
+
+#, fuzzy
+#~ msgid "%s: filesystem mounted, but mount(8) failed"
+#~ msgstr "%s：檔案系統掛載，但是掛載 (8) 失敗"
+
+#, fuzzy
+#~ msgid " %s is already mounted on %s\n"
+#~ msgstr " %s 已經掛載的於 %s\n"
+
+#, fuzzy
+#~ msgid "%s not mounted or bad option"
+#~ msgstr "%s 無法掛載的或不當的選項"
+
+#, fuzzy
+#~ msgid ""
+#~ " (for several filesystems (e.g. nfs, cifs) you might\n"
+#~ " need a /sbin/mount.<type> helper program)\n"
+#~ msgstr ""
+#~ " (用於多個檔案系統(例如：nfs，cifs) 您也許\n"
+#~ " 需要/sbin/掛載。<type> 輔助程式程式)\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ " In some cases useful info is found in syslog - try\n"
+#~ " dmesg | tail or so.\n"
+#~ msgstr ""
+#~ " 在某些情況下有用資訊是找到在中 syslog - 嘗試\n"
+#~ " dmesg|尾端之類\n"
+
+#, fuzzy
+#~ msgid "unrecognized option '%c'"
+#~ msgstr "無法辨識的輸入：%s"
+
+#, fuzzy
+#~ msgid ""
+#~ "%s: target is busy\n"
+#~ " (In some cases useful info about processes that\n"
+#~ " use the device is found by lsof(8) or fuser(1).)"
+#~ msgstr ""
+#~ "%s：目標忙碌中。\n"
+#~ " (在某些情況下有用資訊關於行程該使用\n"
+#~ " 裝置是找到由 lsof (8) 或 fuser (1))"
+
+#, fuzzy
+#~ msgid "%s: mountpoint not found"
+#~ msgstr "%s：找不到"
+
+#, fuzzy
+#~ msgid "line %d is too long, output will be truncated"
+#~ msgstr "列 %d 太長，輸出將被截斷"
+
+#~ msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
+#~ msgstr "寫入「%s」不完整 (已寫入 %zd，預期則為 %zd)\n"
+
+#~ msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
+#~ msgstr "%s：無法加入 inotify 監看 (已達到 inotify 的監看限制)。"
+
+#, fuzzy
+#~ msgid " %s [option] <file>\n"
+#~ msgstr " %s [選項] [<file>]\n"
+
+#, fuzzy
+#~ msgid "failed to load seccomp rule"
+#~ msgstr "讀取速度時失敗"
+
+#, fuzzy
+#~ msgid "Filesystem label:"
+#~ msgstr "檔案系統標貼"
+
+#, fuzzy
+#~ msgid "failed to set PATH"
+#~ msgstr "設定路徑時失敗"
+
+#~ msgid "expected a number, but got '%s'"
+#~ msgstr "預期一個數字，但是卻得到「%s」"
+
+#~ msgid "divisor '%s'"
+#~ msgstr "除數「%s」"
+
+#, fuzzy
+#~ msgid "argument error: %s"
+#~ msgstr "引數錯誤。"
+
+#, fuzzy
+#~ msgid "tty path %s too long"
+#~ msgstr "tty 路徑 %s 太長"
+
+#~ msgid "bad timeout value: %s"
+#~ msgstr "不當的逾時設定值：%s"
+
+#, fuzzy
+#~ msgid "%s: parse error at line %d"
+#~ msgstr "%s：剖析錯誤於列 %d"
+
+#, fuzzy
+#~ msgid "%s: parse error: ignore entry at line %d."
+#~ msgstr "%s：剖析錯誤：忽略條目於列 %d。"
+
+#~ msgid "different"
+#~ msgstr "不同"
+
+#~ msgid "same"
+#~ msgstr "相同"
+
+#~ msgid "%s is not a block special device"
+#~ msgstr "%s 並非區塊特殊裝置"
+
+#, fuzzy
+#~ msgid "%s: device is misaligned"
+#~ msgstr "%s：裝置被 misaligned"
+
+#~ msgid "OS/2 hidden C: drive"
+#~ msgstr "OS/2 隱藏 C: 磁碟"
+
+#, fuzzy
+#~ msgid "%s: failed to get device path"
+#~ msgstr "%s：無法提取裝置路徑"
+
+#, fuzzy
+#~ msgid "%s: unknown device name"
+#~ msgstr "%s：不明裝置名稱"
+
+#, fuzzy
+#~ msgid "%s: failed to get dm name"
+#~ msgstr "%s：無法提取 dm 名稱"
+
+#, fuzzy
+#~ msgid ""
+#~ " -p, --pid <path> path to pid file\n"
+#~ " -s, --socket <path> path to socket\n"
+#~ " -T, --timeout <sec> specify inactivity timeout\n"
+#~ " -k, --kill kill running daemon\n"
+#~ " -r, --random test random-based generation\n"
+#~ " -t, --time test time-based generation\n"
+#~ " -n, --uuids <num> request number of uuids\n"
+#~ " -P, --no-pid do not create pid file\n"
+#~ " -F, --no-fork do not daemonize using double-fork\n"
+#~ " -S, --socket-activation do not create listening socket\n"
+#~ " -d, --debug run in debugging mode\n"
+#~ " -q, --quiet turn on quiet mode\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -p, --pid <path> 路徑到 pid 檔案\n"
+#~ " -s, --socket<路徑> 路徑到通訊端\n"
+#~ " -T, --timeout<sec> 指定不作用逾時\n"
+#~ " -k, --kill 砍除執行中守護程式\n"
+#~ " -r, --random 測試 random-based 產生\n"
+#~ " -t, --time 測試 time-based 產生\n"
+#~ " -n, --uuids<num> 要求 uuids 數量\n"
+#~ " -P, --no-pid 不建立 pid 檔案\n"
+#~ " -F, --no-fork 不 daemonize 使用 double-fork\n"
+#~ " -S, --socket-activation 不建立傾聽通訊端\n"
+#~ " -d, --debug 運行在中偵錯模式\n"
+#~ " -q, --quiet 打開無訊息模式\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "unknown scheduling policy"
+#~ msgstr "不明排程策略"
+
+#, fuzzy
+#~ msgid ""
+#~ " -o, --offset <num> offset in bytes to discard from\n"
+#~ " -l, --length <num> length of bytes to discard from the offset\n"
+#~ " -p, --step <num> size of the discard iterations within the offset\n"
+#~ " -s, --secure perform secure discard\n"
+#~ " -v, --verbose print aligned length and offset\n"
+#~ msgstr ""
+#~ " -o, --offset <num> 偏移在中位元組到捨棄從\n"
+#~ " -l, --length<num> 長度的位元組到捨棄從偏移\n"
+#~ " -m, --minimum<num>最小延伸長度到捨棄\n"
+#~ " -v, --verbose 列印捨棄的位元組數量\n"
+
+#, fuzzy
+#~ msgid "pages"
+#~ msgstr "頁面"
+
+#, fuzzy
+#~ msgid ""
+#~ "Very long (%zu bytes) filename `%s' found.\n"
+#~ " Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile. Exiting."
+#~ msgstr ""
+#~ "很長 (%zu 位元組) 檔名『%s』找到。\n"
+#~ " 請增加 MAX_INPUT_NAMELEN 在中 mkcramfs.c 和重新編譯。 離開。"
+
+#, fuzzy
+#~ msgid "%s: unable to allocate buffer for superblock"
+#~ msgstr "%s：無法 alloc 緩衝區用於超區塊"
+
+#, fuzzy
+#~ msgid "%s: unable to allocate buffers for maps"
+#~ msgstr "%s：無法配置緩衝區用於映射"
+
+#, fuzzy
+#~ msgid "%s: unable to allocate buffer for inodes"
+#~ msgstr "%s：無法配置緩衝區用於 inodes"
+
+#, fuzzy
+#~ msgid ""
+#~ " -J, --json use JSON output format\n"
+#~ " -p, --pid <pid> process id\n"
+#~ " -o, --output <list> define which output columns to use\n"
+#~ " -n, --noheadings don't print headings\n"
+#~ " -r, --raw use the raw output format\n"
+#~ " -u, --notruncate don't truncate text in columns\n"
+#~ " -h, --help display this help and exit\n"
+#~ " -V, --version output version information and exit\n"
+#~ msgstr ""
+#~ " -p, --pid <pid> 處理識別號\n"
+#~ " -o, --output<清單> 定義該項輸出欄位以使用\n"
+#~ " -n, --noheadings 不列印標頭\n"
+#~ " -r --raw 使用原始輸出格式\n"
+#~ " -u, --notruncate 不截斷文字在中欄位\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+
+#, fuzzy
+#~ msgid "Number of Semaphore IDs"
+#~ msgstr "磁區數量"
+
+#, fuzzy
+#~ msgid ""
+#~ " -h, --help display this help text and exit\n"
+#~ " -i, --internal-only don't call the mount.<type> helpers\n"
+#~ " -l, --show-labels lists all mounts with LABELs\n"
+#~ " -n, --no-mtab don't write to /etc/mtab\n"
+#~ msgstr ""
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ " -i, --internal-only 不呼叫掛載。<type> 輔助程式\n"
+#~ " -l, --show-labels 列出所有掛載與標貼\n"
+#~ " -n, --no-mtab 不寫入/etc/mtab\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -v, --verbose say what is being done\n"
+#~ " -V, --version display version information and exit\n"
+#~ " -w, --rw, --read-write mount the filesystem read-write (default)\n"
+#~ msgstr ""
+#~ " -v, --verbose 表示什麼正在是已完成\n"
+#~ " -V, --version 顯示版本資訊然後離開\n"
+#~ " -w, --read-write 掛載檔案系統可讀可寫 (預設)\n"
+
+#, fuzzy
+#~ msgid " -v be verbose\n"
+#~ msgstr " -v 是詳細的\n"
+
+#, fuzzy
+#~ msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
+#~ msgstr "用法：%s [-c|-l 檔名] [-nXX] [-iXX]/dev/名稱 [區塊]"
+
+#, fuzzy
+#~ msgid "%s: bad inode size"
+#~ msgstr "%s：不當的 inode 大小"
+
+#, fuzzy
+#~ msgid "disk: %.*s"
+#~ msgstr "磁碟：%.*s\n"
+
+#, fuzzy
+#~ msgid "label: %.*s"
+#~ msgstr "標籤：%.*s\n"
+
+#, fuzzy
+#~ msgid "flags: %s"
+#~ msgstr "旗標："
+
+#, fuzzy
+#~ msgid "bytes/sector: %ld"
+#~ msgstr "位元組/磁區：%ld\n"
+
+#, fuzzy
+#~ msgid "sectors/track: %ld"
+#~ msgstr "磁區/磁軌：%ld\n"
+
+#, fuzzy
+#~ msgid "tracks/cylinder: %ld"
+#~ msgstr "磁軌/磁柱：%ld\n"
+
+#, fuzzy
+#~ msgid "sectors/cylinder: %ld"
+#~ msgstr "磁區/磁柱：%ld\n"
+
+#, fuzzy
+#~ msgid "cylinders: %ld"
+#~ msgstr "磁柱：%ld\n"
+
+#, fuzzy
+#~ msgid "rpm: %d"
+#~ msgstr "rpm：%d\n"
+
+#, fuzzy
+#~ msgid "interleave: %d"
+#~ msgstr "交錯：%d\n"
+
+#, fuzzy
+#~ msgid "trackskew: %d"
+#~ msgstr "trackskew：%d\n"
+
+#, fuzzy
+#~ msgid "cylinderskew: %d"
+#~ msgstr "cylinderskew：%d\n"
+
+#, fuzzy
+#~ msgid "headswitch: %ld (milliseconds)"
+#~ msgstr "headswitch：%ld\t\t# 毫秒\n"
+
+#, fuzzy
+#~ msgid "track-to-track seek: %ld (milliseconds)"
+#~ msgstr "軌對軌搜尋：%ld\t# 毫秒\n"
+
+#, fuzzy
+#~ msgid "You cannot change a partition into an extended one or vice versa. Delete it first."
+#~ msgstr ""
+#~ "您無法變更分割區為一個擴充分割或反之\n"
+#~ "請先刪除它。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Label geometry: %d heads, %llu sectors\n"
+#~ " %llu cylinders, %d physical cylinders\n"
+#~ " %d extra sects/cyl, interleave %d:1\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (SGI 磁碟標貼)：%d 前端，%llu 磁區\n"
+#~ "%llu 磁柱，%d 實體磁柱\n"
+#~ "%d 額外 sects/cyl，交插 %d:1\n"
+#~ "%s\n"
+#~ "單位=%s 的 %d * %ld 位元組\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "<none>"
+#~ msgstr "無"
+
+#~ msgid "gettimeofday failed"
+#~ msgstr "gettimeofday 失敗"
+
+#, fuzzy
+#~ msgid "sysinfo failed"
+#~ msgstr "sysinfo 失敗"
+
+#~ msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
+#~ msgstr "用法：last [-#] [-f file] [-t tty] [-h hostname] [user…]\n"
+
+#, fuzzy
+#~ msgid "%s: mmap failed"
+#~ msgstr "%s：mmap 失敗"
+
+#~ msgid " still logged in"
+#~ msgstr " 仍然在登入狀態"
+
+#~ msgid ""
+#~ "\n"
+#~ "wtmp begins %s"
+#~ msgstr ""
+#~ "\n"
+#~ "wtmp 開始 %s"
+
+#, fuzzy
+#~ msgid "gethostname failed"
+#~ msgstr "gethostname 失敗"
+
+#~ msgid ""
+#~ "\n"
+#~ "interrupted %10.10s %5.5s \n"
+#~ msgstr ""
+#~ "\n"
+#~ "發生插斷 %10.10s %5.5s\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Scheduling policies:\n"
+#~ " -b | --batch set policy to SCHED_BATCH\n"
+#~ " -f | --fifo set policy to SCHED_FIFO\n"
+#~ " -i | --idle set policy to SCHED_IDLE\n"
+#~ " -o | --other set policy to SCHED_OTHER\n"
+#~ " -r | --rr set policy to SCHED_RR (default)\n"
+#~ msgstr ""
+#~ "\n"
+#~ "排程策略：\n"
+#~ " -b | --batch 設定策略為 SCHED_BATCH\n"
+#~ " -f | --fifo 設定策略為 SCHED_FIFO\n"
+#~ " -i | --idle 設定策略為 SCHED_IDLE\n"
+#~ " -o | --other 設定策略為 SCHED_OTHER\n"
+#~ " -r | --rr 設定策略為 SCHED_RR (預設)\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -a | --all-tasks operate on all the tasks (threads) for a given pid\n"
+#~ " -h | --help display this help\n"
+#~ " -m | --max show min and max valid priorities\n"
+#~ " -p | --pid operate on existing given pid\n"
+#~ " -v | --verbose display status information\n"
+#~ " -V | --version output version information\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -a|--all-tasks 作用於所有事務 (執行緒) 用於給定的 pid\n"
+#~ " -h|--help 顯示這份說明\n"
+#~ " -m|--max 顯示最小和最大有效優先等級\n"
+#~ " -p|--pid 作用於現有給定的 pid\n"
+#~ " -v|--verbose 顯示狀態資訊\n"
+#~ " -V|--version 輸出版本資訊\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "invalid argument to --auto/-a option"
+#~ msgstr "無效的引數到 --auto /-a 選項"
+
+#, fuzzy
+#~ msgid "invalid argument to --manualeject/-i option"
+#~ msgstr "無效的引數到 --manualeject /-i 選項"
+
+#, fuzzy
+#~ msgid "Sorry, only the superuser can change the System Clock."
+#~ msgstr "抱歉，只有系統管理者可以變更系統時鐘。"
+
+#, fuzzy
+#~ msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
+#~ msgstr "抱歉，只有系統管理者可以變更硬體時鐘時期在中內核。"
+
+#~ msgid "read() to %s to wait for clock tick failed"
+#~ msgstr "%s 的 read() 等候時鐘週期失敗"
+
+#, fuzzy
+#~ msgid "set rtc alarm failed"
+#~ msgstr "設定 rtc 警示失敗"
+
+#, fuzzy
+#~ msgid "enable rtc alarm failed"
+#~ msgstr "啟用 rtc 警示失敗"
+
+#, fuzzy
+#~ msgid "suspend to \"%s\" unavailable"
+#~ msgstr "懸置到「%s」不得使用"
+
+#, fuzzy
+#~ msgid " -u, --uts unshare UTS namespace (hostname etc)\n"
+#~ msgstr " -m, --shmems 共用記憶體資料段\n"
+
+#, fuzzy
+#~ msgid " -i, --ipc unshare System V IPC namespace\n"
+#~ msgstr " -p, --pid 顯示建立者和最後一筆計算 PIDs\n"
+
+#, fuzzy
+#~ msgid "cannot open %s: %m"
+#~ msgstr "無法開啟 %s：%s"
+
+#, fuzzy
+#~ msgid "fread failed"
+#~ msgstr "fread 失敗"
+
+#~ msgid "Help Screen for cfdisk"
+#~ msgstr "cfdisk 的說明畫面"
+
+#~ msgid "disk drive."
+#~ msgstr "。"
+
+#~ msgid " `no'"
+#~ msgstr " `no'"
+
+#, fuzzy
+#~ msgid "Too small partition size specified."
+#~ msgstr "沒有 --date 選項指定的。"
+
+#, fuzzy
+#~ msgid "stat failed %s"
+#~ msgstr "stat 失敗 %s"
+
+#, fuzzy
+#~ msgid "faild to allocate iterator"
+#~ msgstr "配置迭代器時失敗"
+
+#, fuzzy
+#~ msgid "cannot open: %s"
+#~ msgstr "無法開啟 %s"
+
+#~ msgid "%s: stat failed"
+#~ msgstr "%s：stat 失敗"
+
+#, fuzzy
+#~ msgid "%s: lstat failed"
+#~ msgstr "%s：stat 失敗"
+
+#~ msgid "set blocksize"
+#~ msgstr "設定區塊大小"
+
+#~ msgid "usage:\n"
+#~ msgstr "用法：\n"
+
+#~ msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
+#~ msgstr "\t註記：elvtune 只適用於 2.4 內核\n"
+
+#~ msgid "missing blockdevice, use -h for help\n"
+#~ msgstr "缺少區塊裝置，使用 -h 以獲得說明\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "elvtune is only useful on older kernels;\n"
+#~ "for 2.6 use IO scheduler sysfs tunables instead..\n"
+#~ msgstr ""
+#~ "\n"
+#~ " elvtune 只適用於舊的內核；\n"
+#~ "於 2.6 請使用 IO 排程程式 sysfs tunables 做為替代。\n"
+
+#, fuzzy
+#~ msgid "Usage: %s [options] device\n"
+#~ msgstr "用法：%s [選項] 裝置\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -n, --no-verify disable the verification after the format\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -n, --no-verify 停用驗證之後格式\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "waidpid failed"
+#~ msgstr "waidpid 失敗"
+
+#, fuzzy
+#~ msgid " -x, --destination <dir> extract into directory\n"
+#~ msgstr " -x, --destination <dir> 抽出進入目錄\n"
+
+#~ msgid "compiled without -x support"
+#~ msgstr "編譯時不具 -x 支援"
+
+#, fuzzy
+#~ msgid "Usage:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "For more information see mkfs(8).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 mkfs (8)。\n"
+
+#, fuzzy
+#~ msgid "edition number argument failed"
+#~ msgstr "編輯數字引數失敗"
+
+#~ msgid "one bad block\n"
+#~ msgstr "一個不良區塊\n"
+
+#, fuzzy
+#~ msgid "Bad swap header size, no label written."
+#~ msgstr "不當的交換頁首大小，沒有標貼手寫的。"
+
+#~ msgid "fsync failed"
+#~ msgstr "fsync 失敗"
+
+#, fuzzy
+#~ msgid "partition type hex or uuid"
+#~ msgstr "分割區類型十六進位或 uuid"
+
+#~ msgid "%s: Out of memory!\n"
+#~ msgstr "%s：記憶體不足！\n"
+
+# "無法建立 %s: %s\n"
+#~ msgid "Unusable"
+#~ msgstr "無法使用"
+
+#~ msgid "Disk has been changed.\n"
+#~ msgstr "磁碟已變更。\n"
+
+#~ msgid "Reboot the system to ensure the partition table is correctly updated.\n"
+#~ msgstr "系統重新開機以確保分割表正確地被更新。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: If you have created or modified any\n"
+#~ "DOS 6.x partitions, please see the cfdisk manual\n"
+#~ "page for additional information.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "警告：如果您已建立或修改任何\n"
+#~ "DOS 6.x 分割區，請參看 cfdisk 手冊\n"
+#~ "以獲得額外的資訊。\n"
+
+#~ msgid "FATAL ERROR"
+#~ msgstr "嚴重錯誤"
+
+#~ msgid "Press any key to exit cfdisk"
+#~ msgstr "按任何鍵以離開 cfdisk"
+
+#~ msgid "Cannot seek on disk drive"
+#~ msgstr "無法搜尋磁碟"
+
+#~ msgid "Cannot read disk drive"
+#~ msgstr "無法讀取磁碟"
+
+#~ msgid "Cannot write disk drive"
+#~ msgstr "無法寫入磁碟"
+
+#~ msgid "Too many partitions"
+#~ msgstr "分割區過多"
+
+#~ msgid "Partition begins before sector 0"
+#~ msgstr "分割區開端小於磁區 0"
+
+#~ msgid "Partition ends before sector 0"
+#~ msgstr "分割區結尾小於磁區 0"
+
+#~ msgid "Partition begins after end-of-disk"
+#~ msgstr "分割區開端大於磁碟末端"
+
+#~ msgid "Partition ends after end-of-disk"
+#~ msgstr "分割區結尾大於磁碟末端"
+
+#~ msgid "logical partitions not in disk order"
+#~ msgstr "邏輯分割區未按磁碟順序"
+
+#~ msgid "logical partitions overlap"
+#~ msgstr "邏輯分割區重疊"
+
+#~ msgid "enlarged logical partitions overlap"
+#~ msgstr "擴大的邏輯分割區重疊"
+
+#~ msgid "!!!! Internal error creating logical drive with no extended partition !!!!"
+#~ msgstr "!!!! 內部錯誤! 新增邏輯磁碟沒有用於擴展分割區 !!!!"
+
+#~ msgid "Cannot create logical drive here -- would create two extended partitions"
+#~ msgstr "無法在此新增邏輯磁碟 -- 如此將造成二個擴展分割區"
+
+#~ msgid "Menu item too long. Menu may look odd."
+#~ msgstr "選單項目太長，選單看起來會很奇怪。"
+
+#~ msgid "Illegal key"
+#~ msgstr "無效按鍵"
+
+#~ msgid "Create a new primary partition"
+#~ msgstr "新增一個主要分割區"
+
+#~ msgid "Create a new logical partition"
+#~ msgstr "新增一個邏輯分割區"
+
+#~ msgid "Cancel"
+#~ msgstr "取消"
+
+#~ msgid "Don't create a partition"
+#~ msgstr "不要新增一個分割區"
+
+#~ msgid "!!! Internal error !!!"
+#~ msgstr "!!! 內部錯誤 !!!"
+
+#~ msgid "Size (in MB): "
+#~ msgstr "大小 (單位 MB): "
+
+#~ msgid "Beginning"
+#~ msgstr "開始"
+
+#~ msgid "Add partition at beginning of free space"
+#~ msgstr "新增分割區於剩餘空間開頭位置"
+
+#~ msgid "Add partition at end of free space"
+#~ msgstr "新增分割區於剩餘空間末端"
+
+#~ msgid "No room to create the extended partition"
+#~ msgstr "已無多餘的磁碟空間可開啟擴充分割區"
+
+#~ msgid "No partition table. Starting with zero table."
+#~ msgstr "無分割表。以空的表格開始。"
+
+#~ msgid "Bad signature on partition table"
+#~ msgstr "分割表上有不當的簽章"
+
+#~ msgid "Do you wish to start with a zero table [y/N] ?"
+#~ msgstr "您想要以一個空的分割表開始嗎 [y/N] ?"
+
+#~ msgid "Cannot open disk drive"
+#~ msgstr "無法開啟磁碟"
+
+#~ msgid "Opened disk read-only - you have no permission to write"
+#~ msgstr "已開啟磁碟為唯讀 - 您無權限可寫入"
+
+#~ msgid "Cannot get disk size"
+#~ msgstr "無法取得磁碟大小"
+
+#~ msgid "Bad primary partition"
+#~ msgstr "壞的主要分割區"
+
+#~ msgid "Warning!! This may destroy data on your disk!"
+#~ msgstr "警告!! 這項操作可能會使您硬碟中的資料消失!"
+
+#~ msgid "Please enter `yes' or `no'"
+#~ msgstr "請鍵入 `yes' 或 `no'"
+
+#~ msgid "Writing partition table to disk..."
+#~ msgstr "正寫入分割表到硬碟…"
+
+#~ msgid "Wrote partition table to disk"
+#~ msgstr "已將分割表寫入硬碟"
+
+#~ msgid "Wrote partition table, but re-read table failed. Run partprobe(8), kpartx(8) or reboot to update table."
+#~ msgstr "已寫入分割表，但重讀失敗。 請執行 partprobe(8)、kpartx(8) 或重新開機以更新分割表。"
+
+#~ msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
+#~ msgstr "沒有主要分割區被標記為可開機. DOS MBR 無法由此開機."
+
+#~ msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this."
+#~ msgstr "超過一個主要分割區標記為可開機. DOS MBR 無法由此開機."
+
+#~ msgid "Enter filename or press RETURN to display on screen: "
+#~ msgstr "鍵入檔名或按 Enter 鍵以顯示於螢幕上: "
+
+#~ msgid "Disk Drive: %s\n"
+#~ msgstr "硬碟: %s\n"
+
+#~ msgid "Sector 0:\n"
+#~ msgstr "磁區 0:\n"
+
+#~ msgid "Sector %d:\n"
+#~ msgstr "磁區 %d:\n"
+
+#~ msgid " None "
+#~ msgstr " 無 "
+
+#~ msgid " Pri/Log"
+#~ msgstr " 主要/邏輯"
+
+#~ msgid " Primary"
+#~ msgstr " 主要的 "
+
+#~ msgid " Logical"
+#~ msgstr " 邏輯的"
+
+#~ msgid "(%02X)"
+#~ msgstr "(%02X)"
+
+#~ msgid "None"
+#~ msgstr "無"
+
+#~ msgid "Partition Table for %s\n"
+#~ msgstr "%s 的分割表\n"
+
+#~ msgid " First Last\n"
+#~ msgstr " 第一個 最後的\n"
+
+#~ msgid " # Type Sector Sector Offset Length Filesystem Type (ID) Flag\n"
+#~ msgstr " # 類型 磁區 磁區偏移值 長度 檔案系統類型 (ID) 旗標\n"
+
+#~ msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
+#~ msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
+
+#~ msgid " ---Starting---- ----Ending----- Start Number of\n"
+#~ msgstr " ---開始--- ----結束----- 開始 數量\n"
+
+#~ msgid " # Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors\n"
+#~ msgstr " # 旗標 磁頭 磁區 磁柱 ID 磁頭 磁區 磁柱 磁區 磁區數 \n"
+
+#~ msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
+#~ msgstr "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
+
+#~ msgid "Raw"
+#~ msgstr "原始"
+
+#~ msgid "Print the table using raw data format"
+#~ msgstr "用原始資料格式顯示分割表"
+
+#~ msgid "Print the table ordered by sectors"
+#~ msgstr "用磁區數大小顯示分割表"
+
+#~ msgid "Table"
+#~ msgstr "分割表"
+
+#~ msgid "Just print the partition table"
+#~ msgstr "只顯示此分割表"
+
+#~ msgid "Don't print the table"
+#~ msgstr "不顯示此分割表"
+
+#~ msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
+#~ msgstr "著作權©1994-1999 Kevin E.Martin & aeb"
+
+#~ msgid " g Change cylinders, heads, sectors-per-track parameters"
+#~ msgstr " g 變更磁柱、磁頭、每一磁軌磁區數各項參數"
+
+#~ msgid " WARNING: This option should only be used by people who"
+#~ msgstr " 警告: 此選項只適用於那些"
+
+#~ msgid " know what they are doing."
+#~ msgstr " 知道他自己在做什麼的人。"
+
+#~ msgid " m Maximize disk usage of the current partition"
+#~ msgstr " m 將分割區的用量最大化"
+
+#~ msgid " Note: This may make the partition incompatible with"
+#~ msgstr " 注意: 這將使分割區不相容於"
+
+#~ msgid " DOS, OS/2, ..."
+#~ msgstr " DOS, OS/2,…"
+
+#~ msgid " p Print partition table to the screen or to a file"
+#~ msgstr " p 顯示分割表於螢幕或輸出至檔案"
+
+#~ msgid " There are several different formats for the partition"
+#~ msgstr " 這裡有不同的分割區格式"
+
+#~ msgid " that you can choose from:"
+#~ msgstr " 以下您可以選擇:"
+
+#~ msgid " r - Raw data (exactly what would be written to disk)"
+#~ msgstr " r - 原始資料 (和您寫入硬碟中的一樣)"
+
+#~ msgid " s - Table ordered by sectors"
+#~ msgstr " s - 分割表以磁區數排列"
+
+#~ msgid " u Change units of the partition size display"
+#~ msgstr " u 變更分割區大小的顯示單位"
+
+#~ msgid " Rotates through MB, sectors and cylinders"
+#~ msgstr " 循環顯示 MB、磁區數和磁柱數"
+
+#~ msgid "CTRL-L Redraws the screen"
+#~ msgstr "CTRL-L 重新整理畫面(以免有殘影)"
+
+#~ msgid " ? Print this screen"
+#~ msgstr " ? 顯示此畫面"
+
+#~ msgid "Change cylinder geometry"
+#~ msgstr "變更磁柱結構"
+
+#~ msgid "Change head geometry"
+#~ msgstr "變更磁頭結構"
+
+#~ msgid "Change sector geometry"
+#~ msgstr "變更磁區結構"
+
+#~ msgid "Done"
+#~ msgstr "完成"
+
+#~ msgid "Done with changing geometry"
+#~ msgstr "變更結構完成"
+
+#~ msgid "Enter the number of cylinders: "
+#~ msgstr "鍵入磁柱數: "
+
+#~ msgid "Illegal cylinders value"
+#~ msgstr "磁柱數值不合法"
+
+#~ msgid "Enter the number of heads: "
+#~ msgstr "鍵入磁頭數字: "
+
+#~ msgid "Illegal heads value"
+#~ msgstr "磁頭數值不合法"
+
+#~ msgid "Enter the number of sectors per track: "
+#~ msgstr "鍵入每一磁軌的磁區數: "
+
+#~ msgid "Illegal sectors value"
+#~ msgstr "磁區數不合法"
+
+#~ msgid "Enter filesystem type: "
+#~ msgstr "請觀察上表,輸入該檔案系統的類型代碼: "
+
+#~ msgid "Cannot change FS Type to empty"
+#~ msgstr "無法變更檔案系統類型為空"
+
+#~ msgid "Cannot change FS Type to extended"
+#~ msgstr "無法變更檔案系統類型為擴展的"
+
+#~ msgid "Unk(%02X)"
+#~ msgstr "Unk(%02X)"
+
+#~ msgid ", NC"
+#~ msgstr ", NC"
+
+#~ msgid "NC"
+#~ msgstr "NC"
+
+#~ msgid "Pri/Log"
+#~ msgstr "主要/邏輯"
+
+#~ msgid "Unknown (%02X)"
+#~ msgstr "未知的 (%02X)"
+
+#~ msgid "Disk Drive: %s"
+#~ msgstr "硬碟: %s"
+
+#~ msgid "Size: %lld bytes, %lld MB"
+#~ msgstr "大小: %lld 位元組, %lld MB"
+
+#~ msgid "Size: %lld bytes, %lld.%lld GB"
+#~ msgstr "大小: %lld 位元組, %lld.%lld GB"
+
+#~ msgid "Heads: %d Sectors per Track: %d Cylinders: %lld"
+#~ msgstr "磁頭數: %d 每一磁軌的磁區數: %d 磁柱數: %lld"
+
+#~ msgid "Part Type"
+#~ msgstr "分割區類型"
+
+#~ msgid "FS Type"
+#~ msgstr "檔案系統類型"
+
+#~ msgid "[Label]"
+#~ msgstr "[標記名稱]"
+
+#~ msgid " Sectors"
+#~ msgstr " 磁區"
+
+#~ msgid " Cylinders"
+#~ msgstr " 磁柱"
+
+#~ msgid " Size (MB)"
+#~ msgstr " 大小 (MB)"
+
+#~ msgid " Size (GB)"
+#~ msgstr " 大小 (GB)"
+
+#~ msgid "No more partitions"
+#~ msgstr "已無多餘的分割區"
+
+#~ msgid "Change disk geometry (experts only)"
+#~ msgstr "變更磁碟結構 (老手適用)"
+
+#~ msgid "Maximize"
+#~ msgstr "最大化"
+
+#~ msgid "Maximize disk usage of the current partition (experts only)"
+#~ msgstr "使目前的分割區的磁碟使用最大化 (老手適用)"
+
+#~ msgid "Print"
+#~ msgstr "印出"
+
+#~ msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
+#~ msgstr "變更檔案系統的類型 (DOS, Linux, swap, OS/2 等等)"
+
+#~ msgid "Units"
+#~ msgstr "單位"
+
+#~ msgid "Change units of the partition size display (MB, sect, cyl)"
+#~ msgstr "變更分割區大小的顯示單位 (用 MB、磁區數或磁柱數)"
+
+#~ msgid "Cannot make this partition bootable"
+#~ msgstr "無法讓這個分割區變成可開機"
+
+#~ msgid "Cannot delete an empty partition"
+#~ msgstr "無法刪除一個空的分割區"
+
+#~ msgid "Cannot maximize this partition"
+#~ msgstr "無法將這個分割區最大化"
+
+#~ msgid "This partition is already in use"
+#~ msgstr "這個分割區已在使用中"
+
+#~ msgid "Cannot change the type of an empty partition"
+#~ msgstr "無法變更一個空分割區的類型"
+
+#~ msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
+#~ msgstr "版權©1994-2002 Kevin E. Martin & aeb\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ "Print version:\n"
+#~ " %s -v\n"
+#~ "Print partition table:\n"
+#~ " %s -P {r|s|t} [options] device\n"
+#~ "Interactive use:\n"
+#~ " %s [options] device\n"
+#~ "\n"
+#~ "Options:\n"
+#~ "-a: Use arrow instead of highlighting;\n"
+#~ "-z: Start with a zero partition table, instead of reading the pt from disk;\n"
+#~ "-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
+#~ " the number of heads and the number of sectors/track.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ "印出版本：\n"
+#~ " %s -v\n"
+#~ "印出分割表：\n"
+#~ " %s -P {r|s|t} [選項] 裝置\n"
+#~ "互動式使用：\n"
+#~ " %s [選項] 裝置\n"
+#~ "\n"
+#~ "選項：\n"
+#~ "-a: 使用箭頭以代替高亮度顯示；\n"
+#~ "-z: 以零分割表開始，以代替從磁碟讀取分割表；\n"
+#~ "-c C -h H -s S:強制變更內核認為的磁柱數量、\n"
+#~ " 磁頭數量和每一磁軌的磁區數量。\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "cannot parse number of cylinders"
+#~ msgstr "無法剖析磁柱數量"
+
+#, fuzzy
+#~ msgid "cannot parse number of heads"
+#~ msgstr "無法剖析前端數量"
+
+#, fuzzy
+#~ msgid "cannot parse number of sectors"
+#~ msgstr "無法剖析磁區數量"
+
+#~ msgid "Writing disklabel to %s.\n"
+#~ msgstr "將磁碟標籤寫入 %s。\n"
+
+#~ msgid "Last %s or +size or +sizeM or +sizeK"
+#~ msgstr "最後 %s 或 +size 或 +sizeM 或 +sizeK"
+
+#~ msgid "Reading disklabel of %s at sector %d.\n"
+#~ msgstr "於磁區 %2$d 讀取 %1$s 的磁碟標籤。\n"
+
+#~ msgid "BSD disklabel command (m for help): "
+#~ msgstr "BSD 磁碟標籤命令 (m 以獲得說明)："
+
+#~ msgid "drivedata: "
+#~ msgstr "磁碟資料："
+
+#~ msgid "# start end size fstype [fsize bsize cpg]\n"
+#~ msgstr "# 開始 結束 大小 檔案系統類型 [fsize bsize cpg]\n"
+
+#~ msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
+#~ msgstr "必須 <= 磁區/磁軌 * 磁軌/磁柱 (預設)。\n"
+
+#~ msgid "Warning: too many partitions (%d, maximum is %d).\n"
+#~ msgstr "警告：太多分割區 (%d, 最大值為 %d)。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "Syncing disks.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "同步磁碟。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Usage:\n"
+#~ " %1$s [options] <disk> change partition table\n"
+#~ " %1$s [options] -l <disk> list partition table(s)\n"
+#~ " %1$s -s <partition> give partition size(s) in blocks\n"
+#~ "\n"
+#~ "Options:\n"
+#~ " -b <size> sector size (512, 1024, 2048 or 4096)\n"
+#~ " -c[=<mode>] compatible mode: 'dos' or 'nondos' (default)\n"
+#~ " -h print this help text\n"
+#~ " -u[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
+#~ " -v print program version\n"
+#~ " -C <number> specify the number of cylinders\n"
+#~ " -H <number> specify the number of heads\n"
+#~ " -S <number> specify the number of sectors per track\n"
+#~ "\n"
+#~ msgstr ""
+#~ "用法：\n"
+#~ " %1$s [選項] <disk> 變更分割表\n"
+#~ " %1$s [選項] -l<磁碟>清單分割表\n"
+#~ " %1$s -s<分割> 給出分割區大小在中區塊\n"
+#~ "\n"
+#~ "選項：\n"
+#~ " -b<大小> 磁區大小 (512,- 1024, 2048 或 4096)\n"
+#~ " -c[=< 模式>] 相容模式：'dos' 或 'nondos' (預設)\n"
+#~ " -h 印出這份說明文字\n"
+#~ " -u[=< 單位>] 顯示單位：'cylinders' 或 'sectors' (預設)\n"
+#~ " -v 列印程式版本\n"
+#~ " -C<數字> 指定磁柱數量\n"
+#~ " -H<數字> 指定前端數量\n"
+#~ " -S<數字> 指定磁區數量各軌段\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "unable to seek on %s"
+#~ msgstr "無法尋指於 %s"
+
+#, fuzzy
+#~ msgid "unable to write %s"
+#~ msgstr "無法寫入 %s"
+
+#, fuzzy
+#~ msgid "fatal error"
+#~ msgstr "嚴重錯誤"
+
+#~ msgid "Command action"
+#~ msgstr "命令動作"
+
+#~ msgid "You must set"
+#~ msgstr "您必須設定"
+
+#~ msgid "heads"
+#~ msgstr "磁頭"
+
+#~ msgid "sectors"
+#~ msgstr "磁區"
+
+#~ msgid " and "
+#~ msgstr " 和 "
+
+#~ msgid "Unsupported suffix: '%s'.\n"
+#~ msgstr "不受支援的字尾：「%s」。\n"
+
+#~ msgid ""
+#~ "Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
+#~ " 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
+#~ msgstr ""
+#~ "支援的單位: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
+#~ " 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
+
+#~ msgid "Using default value %u\n"
+#~ msgstr "使用預設值 %u\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s: %ld MB, %lld bytes"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s：%ld MB，%lld 位元組"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s: %ld.%ld GB, %llu bytes"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s：%ld.%ld GB，%llu 位元組"
+
+#, fuzzy
+#~ msgid "cannot write disk label"
+#~ msgstr "無法寫入磁碟標貼"
+
+#~ msgid ""
+#~ "\n"
+#~ "Error closing file\n"
+#~ msgstr ""
+#~ "\n"
+#~ "關閉檔案發生錯誤\n"
+
+#, fuzzy
+#~ msgid "Warning: setting sector offset for DOS compatibility\n"
+#~ msgstr "警告：設定磁區偏移用於 DOS 相容性\n"
+
+#~ msgid "cannot open %s\n"
+#~ msgstr "無法開啟 %s\n"
+
+#~ msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
+#~ msgstr "於 %s 偵測到 OSF/1 磁碟標籤，進入磁碟標籤模式。\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
+#~ " switch off the mode (with command 'c')."
+#~ msgstr ""
+#~ "\n"
+#~ "警告：不宜再使用 DOS 相容模式。強烈建議\n"
+#~ " 關掉此模式 (利用命令「c」)。"
+
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
+#~ " change units to sectors.\n"
+#~ msgstr ""
+#~ "\n"
+#~ "警告：不宜再用磁柱做為顯示單位。使用命令「u」以\n"
+#~ " 變更單位為磁區。\n"
+
+#~ msgid "New disk identifier (current 0x%08x): "
+#~ msgstr "新磁碟識別碼 (目前為 0x%08x)："
+
+#~ msgid "Partition %d is already defined. Delete it before re-adding it.\n"
+#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
+
+#~ msgid "No free sectors available\n"
+#~ msgstr "沒有可用的磁區存在\n"
+
+#~ msgid "Last %1$s, +%2$s or +size{K,M,G}"
+#~ msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+
+#~ msgid " phys=(%d, %d, %d) "
+#~ msgstr " 實體=(%d, %d, %d) "
+
+#~ msgid "logical=(%d, %d, %d)\n"
+#~ msgstr "邏輯=(%d, %d, %d)\n"
+
+#, fuzzy
+#~ msgid "Warning: bad start-of-data in partition %zd\n"
+#~ msgstr "警告：在分割區 %d 中不當的資料起始\n"
+
+#, fuzzy
+#~ msgid "Warning: partition %zd overlaps partition %zd.\n"
+#~ msgstr "警告：分割區 %d 與分割區 %d 重疊。\n"
+
+#, fuzzy
+#~ msgid "Warning: partition %zd is empty\n"
+#~ msgstr "警告：分割區 %d 是空的\n"
+
+#~ msgid "Adding a primary partition\n"
+#~ msgstr "加入一個主要分割區\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Partition type:\n"
+#~ " p primary (%zd primary, %d extended, %zd free)\n"
+#~ "%s\n"
+#~ "Select (default %c): "
+#~ msgstr ""
+#~ "分割區類型：\n"
+#~ " p 主要 (%d 主要，%d 進階，%d 自由)\n"
+#~ "%s\n"
+#~ "選取 (預設 %c)："
+
+#, fuzzy
+#~ msgid " e extended"
+#~ msgstr " e 進階"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "WARNING: If you have created or modified any DOS 6.xpartitions, please see the fdisk manual page for additionalinformation.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "警告：如果您已建立或修改任何 DOS 6.x\n"
+#~ "分割區，請參看 fdisk 線上手冊以獲得額外\n"
+#~ "資訊。\n"
+
+#~ msgid ""
+#~ "This doesn't look like a partition table\n"
+#~ "Probably you selected the wrong device.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "這看起來不像是一個分割表\n"
+#~ "您大概選了錯誤的裝置。\n"
+#~ "\n"
+
+#~ msgid "%*s Boot Start End Blocks Id System\n"
+#~ msgstr "%*s 開機 開始 結束 區塊 識別號 系統\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s: %d heads, %llu sectors, %llu cylinders\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s：%d 前端，%llu 磁區，%llu 磁柱\n"
+#~ "\n"
+
+#~ msgid "Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID\n"
+#~ msgstr "Nr AF 磁頭 磁區 磁柱 磁頭 磁區 磁柱 開始 大小 ID\n"
+
+#~ msgid ""
+#~ "\n"
+#~ "\tThere is a valid Mac label on this disk.\n"
+#~ "\tUnfortunately fdisk(1) cannot handle these disks.\n"
+#~ "\tUse either pdisk or parted to modify the partition table.\n"
+#~ "\tNevertheless some advice:\n"
+#~ "\t1. fdisk will destroy its contents on write.\n"
+#~ "\t2. Be sure that this disk is NOT a still vital\n"
+#~ "\t part of a volume group. (Otherwise you may\n"
+#~ "\t erase the other disks as well, if unmirrored.)\n"
+#~ msgstr ""
+#~ "\n"
+#~ "\t有效的 Mac 標籤位於這個磁碟。\n"
+#~ "\t不幸地 fdisk(1) 無法處理這些磁碟。\n"
+#~ "\t必須使用 pdisk 或 parted 以修改分割表。\n"
+#~ "\t不論如何還是有些建言：\n"
+#~ "\t1.fdisk 將於寫入時銷毀它的內容。\n"
+#~ "\t2.確認這個磁碟並非仍是\n"
+#~ "\t 卷冊群的現用部分。(否則如果沒有鏡像備份的話，\n"
+#~ "\t 您也許同樣會清除其他磁碟。)\n"
-#: term-utils/agetty.c:479
-#, c-format
-msgid "%s: can't exec %s: %m"
-msgstr "%s：無法 exec %s: %m"
+#~ msgid ""
+#~ "\tSorry - this fdisk cannot handle Mac disk labels.\n"
+#~ "\tIf you want to add DOS-type partitions, create\n"
+#~ "\ta new empty DOS partition table first. (Use o.)\n"
+#~ "\tWARNING: This will destroy the present disk contents.\n"
+#~ msgstr ""
+#~ "\t抱歉 - fdisk 無法處理 Mac 磁碟標籤。\n"
+#~ "\t如果您要加入 DOS 類型分割區，請先建立\n"
+#~ "\t新的空 DOS 分割表。(使用 o.)\n"
+#~ "\t警告：這將銷毀現有磁碟內容。\n"
-#: term-utils/agetty.c:510 term-utils/agetty.c:788 term-utils/agetty.c:800
-#: term-utils/agetty.c:1292 term-utils/agetty.c:1310 term-utils/agetty.c:1342
-#: term-utils/agetty.c:1352 term-utils/agetty.c:1390 term-utils/agetty.c:1666
-#: term-utils/agetty.c:2153
-#, fuzzy, c-format
-msgid "failed to allocate memory: %m"
-msgstr "配置記憶體時失敗：%m"
+#~ msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n"
+#~ msgstr "根據 MIPS 電腦系統公司，標籤必須包含不超過 512 位元組\n"
-#: term-utils/agetty.c:670
#, fuzzy
-msgid "unssuported --local-line mode argument"
-msgstr "不受支援的引數：%s"
-
-#: term-utils/agetty.c:699
-#, c-format
-msgid "bad timeout value: %s"
-msgstr "不當的逾時設定值：%s"
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s (SGI disk label): %d heads, %llu sectors, %llu cylinders\n"
+#~ "Units = %s of %d * %ld bytes\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (SGI 磁碟標貼)：%d 前端，%llu 磁區，%llu 磁柱\n"
+#~ "單位=%s 的 %d * %ld 位元組\n"
+#~ "\n"
-#: term-utils/agetty.c:818
-#, c-format
-msgid "bad speed: %s"
-msgstr "不當的速度：%s"
+#~ msgid ""
+#~ "----- partitions -----\n"
+#~ "Pt# %*s Info Start End Sectors Id System\n"
+#~ msgstr ""
+#~ "----- 分割區 -----\n"
+#~ "Pt# %*s 資訊 開始 結束 磁區 識別號 系統\n"
-#: term-utils/agetty.c:820
-msgid "too many alternate speeds"
-msgstr "太多交替速度"
+#~ msgid ""
+#~ "----- Bootinfo -----\n"
+#~ "Bootfile: %s\n"
+#~ "----- Directory Entries -----\n"
+#~ msgstr ""
+#~ "----- 開機資訊 -----\n"
+#~ "開機檔案：%s\n"
+#~ "----- 目錄項目 -----\n"
-#: term-utils/agetty.c:945 term-utils/agetty.c:962 term-utils/agetty.c:1002
-#, c-format
-msgid "/dev/%s: cannot open as standard input: %m"
-msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+#, fuzzy
+#~ msgid "%2zd: %-10s sector%5u size%8u\n"
+#~ msgstr "%2d: %-10s 磁區%5u 大小%8u\n"
-#: term-utils/agetty.c:966 term-utils/agetty.c:970
-#, c-format
-msgid "/dev/%s: not a character device"
-msgstr "/dev/%s: 不是字元裝置"
+#~ msgid "No partitions defined\n"
+#~ msgstr "無已定義分割區\n"
-#: term-utils/agetty.c:974 term-utils/agetty.c:1006
-#, fuzzy, c-format
-msgid "/dev/%s: cannot get controlling tty: %m"
-msgstr "/dev/%s: 無法開啟為標準輸入：%m"
+#~ msgid ""
+#~ "The entire disk partition is only %d diskblock large,\n"
+#~ "but the disk is %d diskblocks long.\n"
+#~ msgstr ""
+#~ "整個磁碟分割區大小只有 %d 磁碟區塊，\n"
+#~ "但是這個磁碟大小為 %d 磁碟區塊。\n"
-#: term-utils/agetty.c:996
-#, fuzzy, c-format
-msgid "/dev/%s: vhangup() failed: %m"
-msgstr "%s：calloc() 失敗：%s\n"
+#~ msgid "Partition %d does not start on cylinder boundary.\n"
+#~ msgstr "分割區 %d 並非始於磁柱邊界。\n"
-#: term-utils/agetty.c:1017
-#, c-format
-msgid "%s: not open for read/write"
-msgstr "%s：無法開啟用於讀取/寫入"
+#~ msgid "Partition %d does not end on cylinder boundary.\n"
+#~ msgstr "分割區 %d 並非終於磁柱邊界。\n"
-#: term-utils/agetty.c:1022
-#, fuzzy, c-format
-msgid "/dev/%s: cannot set process group: %m"
-msgstr "%s：無法變更處理優先權：%m"
+#, fuzzy
+#~ msgid "Partition %zd is already defined. Delete it before re-adding it.\n"
+#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
-#: term-utils/agetty.c:1036
-#, c-format
-msgid "%s: dup problem: %m"
-msgstr "%s：dup 問題：%m"
+#~ msgid "You will get a partition overlap on the disk. Fix it first!\n"
+#~ msgstr "您的磁碟上將會有重疊的分割區，請先修正它！\n"
-#: term-utils/agetty.c:1053
-#, fuzzy, c-format
-msgid "%s: failed to get terminal attributes: %m"
-msgstr "無法取得終端機屬性用於 %s"
+#, fuzzy
+#~ msgid "Building a new SGI disklabel.\n"
+#~ msgstr "建立新的 SGI disklabel。\n"
-#: term-utils/agetty.c:1222
-#, fuzzy, c-format
-msgid "setting terminal attributes failed: %m"
-msgstr "無法設定終端機屬性用於 %s"
+#, fuzzy
+#~ msgid "HDIO_GETGEO ioctl failed on %s"
+#~ msgstr "HDIO_GETGEO ioctl 失敗的於 %s"
-#: term-utils/agetty.c:1333
-#, fuzzy, c-format
-msgid "cannot open: %s: %m"
-msgstr "無法開啟 %s：%s"
+#, fuzzy
+#~ msgid ""
+#~ "Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %llu.\n"
+#~ "This value may be truncated for devices > 33.8 GB.\n"
+#~ msgstr ""
+#~ "警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
+#~ "這個值也許會被截斷用於裝置>33.8 GB。\n"
-#: term-utils/agetty.c:1440
-msgid "[press ENTER to login]"
-msgstr ""
+#~ msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
+#~ msgstr "識別號=%02x\t開始=%d\t長度=%d\n"
-#: term-utils/agetty.c:1456
#, fuzzy
-msgid "Num Lock off"
-msgstr "Num 鎖定關閉"
+#~ msgid "Trying to keep parameters of partitions already set.\n"
+#~ msgstr "嘗試保持參數的分割區已經設定。\n"
-#: term-utils/agetty.c:1459
-#, fuzzy
-msgid "Num Lock on"
-msgstr "Num 鎖定開"
+#~ msgid "YES\n"
+#~ msgstr "YES\n"
-#: term-utils/agetty.c:1462
#, fuzzy
-msgid "Caps Lock on"
-msgstr "大寫鍵開"
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
+#~ "%llu cylinders, %d alternate cylinders, %d physical cylinders\n"
+#~ "%d extra sects/cyl, interleave %d:1\n"
+#~ "Label ID: %s\n"
+#~ "Volume ID: %s\n"
+#~ "Units = %s of %d * 512 bytes\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (Sun 磁碟標貼)：%u 前端，%llu 磁區，%d rpm\n"
+#~ "%llu 磁柱，%d 交替磁柱，%d 實體磁柱\n"
+#~ "%d 額外 sects/cyl，交插 %d:1\n"
+#~ "標貼識別號：%s\n"
+#~ "音量識別號：%s\n"
+#~ "單位=%s 的 %d * 512 位元組\n"
+#~ "\n"
-#: term-utils/agetty.c:1465
#, fuzzy
-msgid "Scroll Lock on"
-msgstr "捲動鎖定開"
+#~ msgid ""
+#~ "\n"
+#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %llu cylinders\n"
+#~ "Units = %s of %d * 512 bytes\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "磁碟 %s (Sun 磁碟標貼)：%u 前端，%llu 磁區，%llu 磁柱\n"
+#~ "單位=%s 的 %d * 512 位元組\n"
+#~ "\n"
-#: term-utils/agetty.c:1468
-#, fuzzy, c-format
-msgid ""
-"Hint: %s\n"
-"\n"
-msgstr ""
-"提示：%s\n"
-"\n"
+#~ msgid "%*s Flag Start End Blocks Id System\n"
+#~ msgstr "%*s 旗標 開始 結束 區塊 識別號 系統\n"
-#: term-utils/agetty.c:1587
-#, c-format
-msgid "%s: read: %m"
-msgstr "%s：讀取：%m"
+#~ msgid "seek error on %s - cannot seek to %lu\n"
+#~ msgstr "於 %s 搜尋錯誤 - 無法搜尋至 %lu\n"
-#: term-utils/agetty.c:1646
-#, c-format
-msgid "%s: input overrun"
-msgstr "%s：輸入超出"
+#~ msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
+#~ msgstr "搜尋錯誤：想要 0x%08x%08x, 得到 0x%08x%08x\n"
-#: term-utils/agetty.c:1662 term-utils/agetty.c:1670
-#, c-format
-msgid "%s: invalid character conversion for login name"
-msgstr ""
+#~ msgid "read error on %s - cannot read sector %lu\n"
+#~ msgstr "於 %s 讀取錯誤 - 無法讀取磁區 %lu\n"
-#: term-utils/agetty.c:1676
-#, c-format
-msgid "%s: invalid character 0x%x in login name"
-msgstr ""
+#~ msgid "write error on %s - cannot write sector %lu\n"
+#~ msgstr "於 %s 寫入錯誤 - 無法寫入磁區 %lu\n"
-#: term-utils/agetty.c:1761
-#, fuzzy, c-format
-msgid "%s: failed to set terminal attributes: %m"
-msgstr "無法設定終端機屬性用於 %s"
+#~ msgid "cannot open partition sector save file (%s)\n"
+#~ msgstr "無法開啟分割磁區的儲存檔案 (%s)\n"
-#: term-utils/agetty.c:1797
-#, fuzzy, c-format
-msgid ""
-" %1$s [options] line [baud_rate,...] [termtype]\n"
-" %1$s [options] baud_rate,... line [termtype]\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %1$s [選項] 列 baud_rate ,...[termtype]\n"
-" %1$s [選項] baud_rate ,...列 [termtype]\n"
+#~ msgid "write error on %s\n"
+#~ msgstr "於 %s 寫入錯誤\n"
-#: term-utils/agetty.c:1800
-#, fuzzy
-msgid " -8, --8bits assume 8-bit tty\n"
-msgstr " -s, --status 查詢印表機狀態\n"
+#~ msgid "cannot stat partition restore file (%s)\n"
+#~ msgstr "無法識別分割區的還原檔案狀態 (%s)\n"
-#: term-utils/agetty.c:1801
-msgid " -a, --autologin <user> login the specified user automatically\n"
-msgstr ""
+#~ msgid "partition restore file has wrong size - not restoring\n"
+#~ msgstr "分割區還原檔案大小有誤 - 無法還原\n"
-#: term-utils/agetty.c:1802
-#, fuzzy
-msgid " -c, --noreset do not reset control mode\n"
-msgstr " -r, --reset 重置通訊埠\n"
+#~ msgid "cannot open partition restore file (%s)\n"
+#~ msgstr "無法開啟分割區的還原檔案 (%s)\n"
-#: term-utils/agetty.c:1803
-#, fuzzy
-msgid " -E, --remote use -r <hostname> for login(1)\n"
-msgstr " -r, --reset 重置所有計數器 (只限 root)\n"
+#~ msgid "cannot open device %s for writing\n"
+#~ msgstr "無法開啟裝置 %s 以供寫入\n"
-#: term-utils/agetty.c:1804
-#, fuzzy
-msgid " -f, --issue-file <file> display issue file\n"
-msgstr " -h, --help 顯示這份說明然後離開\n"
+#~ msgid "error writing sector %lu on %s\n"
+#~ msgstr "於 %2$s 寫入磁區 %1$lu 時發生錯誤\n"
-#: term-utils/agetty.c:1805
-msgid " -h, --flow-control enable hardware flow control\n"
-msgstr ""
+#~ msgid "Disk %s: cannot get geometry\n"
+#~ msgstr "磁碟 %s: 無法取得結構參數\n"
-#: term-utils/agetty.c:1806
-#, fuzzy
-msgid " -H, --host <hostname> specify login host\n"
-msgstr " -s, --shell <shell> 指定登入命令殼\n"
+#~ msgid "Disk %s: cannot get size\n"
+#~ msgstr "磁碟 %s: 無法取得大小\n"
-#: term-utils/agetty.c:1807
-#, fuzzy
-msgid " -i, --noissue do not display issue file\n"
-msgstr " -q, --stats 顯示統計關於 tty\n"
+#~ msgid ""
+#~ "Warning: start=%lu - this looks like a partition rather than\n"
+#~ "the entire disk. Using fdisk on it is probably meaningless.\n"
+#~ "[Use the --force option if you really want this]\n"
+#~ msgstr ""
+#~ "警告：開始=%lu - 這看來像是分割區而非\n"
+#~ "整個磁碟。於其上使用 fdisk 可能不具意義的。\n"
+#~ "[如果您確實想要如此，就使用 --force 選項]\n"
-#: term-utils/agetty.c:1808
-msgid " -I, --init-string <string> set init string\n"
-msgstr ""
+#~ msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
+#~ msgstr "警告：HDIO_GETGEO 表示具有 %lu 個磁頭\n"
-#: term-utils/agetty.c:1809
-msgid " -l, --login-program <file> specify login program\n"
-msgstr ""
+#~ msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
+#~ msgstr "警告：HDIO_GETGEO 表示具有 %lu 段磁區\n"
-#: term-utils/agetty.c:1810
-#, fuzzy
-msgid " -L, --local-line[=<mode>] cotrol local line flag\n"
-msgstr " -u --unlock 移除鎖定\n"
+#~ msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
+#~ msgstr "警告：BLKGETSIZE/HDIO_GETGEO 表示具有 %lu 圈磁柱\n"
-#: term-utils/agetty.c:1811
-msgid " -m, --extract-baud extract baud rate during connect\n"
-msgstr ""
+#~ msgid ""
+#~ "Warning: unlikely number of sectors (%lu) - usually at most 63\n"
+#~ "This will give problems with all software that uses C/H/S addressing.\n"
+#~ msgstr ""
+#~ "警告：不太可能的磁區數量 (%lu) - 通常最多為 63\n"
+#~ "這將對於使用 C/H/S 定址的軟體造成問題。\n"
-#: term-utils/agetty.c:1812
-#, fuzzy
-msgid " -n, --skip-login do not prompt for login\n"
-msgstr " -f 不分割長列\n"
+#~ msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
+#~ msgstr "分割區 %2$s 的 %1$s 有不可能的磁頭數值：%3$lu (應該介於 0-%4$lu)\n"
-#: term-utils/agetty.c:1813
-#, fuzzy
-msgid " -o, --login-options <opts> options that are passed to login\n"
-msgstr " -l, --longoptions <longopts> 長選項為辨識的\n"
+#~ msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n"
+#~ msgstr "分割區 %1$s 的 %2$s 有不可能的磁區數值：%3$lu (應該介於 1-%4$lu)\n"
-#: term-utils/agetty.c:1814
-#, fuzzy
-msgid " -p, --login-pause wait for any key before the login\n"
-msgstr " -f 不分割長列\n"
+#~ msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n"
+#~ msgstr "分割區 %1$s 的 %2$s 有不可能的磁柱數值：%3$lu (應該介於 0-%4$lu)\n"
-#: term-utils/agetty.c:1815
-#, fuzzy
-msgid " -r, --chroot <dir> change root to the directory\n"
-msgstr " -a, --abort <on|off> 放棄於錯誤\n"
+#~ msgid ""
+#~ "The command to re-read the partition table failed.\n"
+#~ "Run partprobe(8), kpartx(8) or reboot your system now,\n"
+#~ "before using mkfs\n"
+#~ msgstr ""
+#~ "重新讀取分割表的命令失敗。\n"
+#~ "在使用 mkfs 之前，請執行 partprobe(8),kpartx(8) 或將您的系統重新開機\n"
-#: term-utils/agetty.c:1816
-#, fuzzy
-msgid " -R, --hangup do virtually hangup on the tty\n"
-msgstr " -u, --unquote 不引言輸出\n"
+#~ msgid "Error closing %s\n"
+#~ msgstr "關閉 %s 時發生錯誤\n"
+
+#~ msgid "%s: no such partition\n"
+#~ msgstr "%s：無此類分割區\n"
+
+#~ msgid "unrecognized format - using sectors\n"
+#~ msgstr "無法辨識的格式 - 使用磁區數\n"
+
+#~ msgid "unimplemented format - using %s\n"
+#~ msgstr "尚未實作的格式 - 使用 %s\n"
-#: term-utils/agetty.c:1817
#, fuzzy
-msgid " -s, --keep-baud try to keep baud rate after break\n"
-msgstr " -d, --debug 列印詳細的訊息到標準勘誤\n"
+#~ msgid ""
+#~ "Units: cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：磁柱的 %lu 位元組，區塊的 1024 位元組，計數從 %d\n"
+#~ "\n"
-#: term-utils/agetty.c:1818
-msgid " -t, --timeout <number> login process timeout\n"
-msgstr ""
+#~ msgid " Device Boot Start End #cyls #blocks Id System\n"
+#~ msgstr " 裝置開機起始 結束 磁柱數 區塊數 識別號 系統\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Units: sectors of 512 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：磁區的 512 位元組，計數從 %d\n"
+#~ "\n"
-#: term-utils/agetty.c:1819
-msgid " -U, --detect-case detect uppercase terminal\n"
-msgstr ""
+#~ msgid " Device Boot Start End #sectors Id System\n"
+#~ msgstr " 裝置開機 起始 結束 磁區數 識別號 系統\n"
-#: term-utils/agetty.c:1820
#, fuzzy
-msgid " -w, --wait-cr wait carriage-return\n"
-msgstr " -w, --wait <us> strobe 等待在中 micro 秒\n"
+#~ msgid ""
+#~ "Units: blocks of 1024 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：區塊的 1024 位元組，計數從 %d\n"
+#~ "\n"
-#: term-utils/agetty.c:1821
-#, fuzzy
-msgid " --noclear do not clear the screen before prompt\n"
-msgstr " -c 清空螢幕之前顯示\n"
+#~ msgid " Device Boot Start End #blocks Id System\n"
+#~ msgstr " 裝置開機 起始 結束 區塊數 識別號 系統\n"
-#: term-utils/agetty.c:1822
#, fuzzy
-msgid " --nohints do not print hints\n"
-msgstr " -f 不分割長列\n"
+#~ msgid ""
+#~ "Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from %d\n"
+#~ "\n"
+#~ msgstr ""
+#~ "單位：1 MiB=1024*1024 位元組，區塊的 1024 位元組，計數從 %d\n"
+#~ "\n"
-#: term-utils/agetty.c:1823
-#, fuzzy
-msgid " --nonewline do not print a newline before issue\n"
-msgstr " -e 不暫停於結束的檔案\n"
+#~ msgid " Device Boot Start End MiB #blocks Id System\n"
+#~ msgstr " 裝置開機起始 結束 MiB 區塊數 識別號 系統\n"
-#: term-utils/agetty.c:1824
-#, fuzzy
-msgid " --nohostname no hostname at all will be shown\n"
-msgstr " -e 不暫停於結束的檔案\n"
+#~ msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "\t\t起始：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
-#: term-utils/agetty.c:1825
-msgid " --long-hostname show full qualified hostname\n"
-msgstr ""
+#~ msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "\t\t結束：(c,h,s) 預期為 (%ld,%ld,%ld) 辨認為 (%ld,%ld,%ld)\n"
-#: term-utils/agetty.c:1826
-msgid " --erase-chars <string> additional backspace chars\n"
-msgstr ""
+#~ msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
+#~ msgstr "分割區結束於磁柱 %ld，位於磁碟末端之後\n"
-#: term-utils/agetty.c:1827
-msgid " --kill-chars <string> additional kill chars\n"
-msgstr ""
+#~ msgid "No partitions found\n"
+#~ msgstr "找不到分割區\n"
+
+#~ msgid ""
+#~ "Warning: The partition table looks like it was made\n"
+#~ " for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
+#~ "For this listing I'll assume that geometry.\n"
+#~ msgstr ""
+#~ "警告：分割表看起來像是\n"
+#~ "用於 C/H/S=*/%ld/%ld (而非 %ld/%ld/%ld)。\n"
+#~ "我將會假設該結構參數以用於此列表。\n"
-#: term-utils/agetty.c:1828
#, fuzzy
-msgid " --help display this help and exit\n"
-msgstr " -h 顯示這份說明然後離開\n"
+#~ msgid "no partition table present."
+#~ msgstr "沒有分割表呈現。"
-#: term-utils/agetty.c:1829
#, fuzzy
-msgid " --version output version information and exit\n"
-msgstr " -V 輸出版本資訊然後離開\n"
+#~ msgid "strange, only %d partitions defined."
+#~ msgstr "怪異的，只有 %d 分割區定義。"
-#: term-utils/agetty.c:2118
-#, fuzzy, c-format
-msgid "%d user"
-msgid_plural "%d users"
-msgstr[0] "使用者"
+#~ msgid "Warning: partition %s has size 0 but is not marked Empty\n"
+#~ msgstr "警告：分割區 %s 大小為 0 但是並未標記為空\n"
-#: term-utils/agetty.c:2241
-#, fuzzy, c-format
-msgid "checkname failed: %m"
-msgstr "chown 失敗：%s"
+#~ msgid "Warning: partition %s has size 0 and is bootable\n"
+#~ msgstr "警告：分割區 %s 大小為 0 且為可開機\n"
-#: term-utils/mesg.c:75
-#, fuzzy, c-format
-msgid " %s [options] [y | n]\n"
-msgstr " %s [選項] [y|n]\n"
+#~ msgid "Warning: partition %s has size 0 and nonzero start\n"
+#~ msgstr "警告：分割區 %s 大小為 0 且以非零值開始\n"
-#: term-utils/mesg.c:77
#, fuzzy
-msgid " -v, --verbose explain what is being done\n"
-msgstr " -v, --verbose 解釋什麼正在是已完成\n"
+#~ msgid "Warning: partition %s is not contained in partition %s\n"
+#~ msgstr "警告：分割 %s 未被包含在中分割 %s\n"
-#: term-utils/mesg.c:121
#, fuzzy
-msgid "ttyname failed"
-msgstr "ttyname 失敗"
+#~ msgid "Warning: partitions %s and %s overlap\n"
+#~ msgstr "警告：分割區 %s 和 %s 重疊\n"
-#: term-utils/mesg.c:128
#, fuzzy
-msgid "is y"
-msgstr "是 y"
+#~ msgid ""
+#~ "Warning: partition %s contains part of the partition table (sector %llu),\n"
+#~ "and will destroy it when filled\n"
+#~ msgstr ""
+#~ "警告：分割 %s 含有部分的分割表 (磁區 %llu)，\n"
+#~ "並將銷毀它時 filled\n"
-#: term-utils/mesg.c:131
-#, fuzzy
-msgid "is n"
-msgstr "是 n"
+#~ msgid "Warning: partition %s starts at sector 0\n"
+#~ msgstr "警告：分割區 %s 開始於磁區 0\n"
-#: term-utils/mesg.c:142 term-utils/mesg.c:148
-#, fuzzy, c-format
-msgid "change %s mode failed"
-msgstr "變更 %s 模式失敗"
+#~ msgid "Warning: partition %s extends past end of disk\n"
+#~ msgstr "警告：分割區 %s 延伸超過磁碟末端\n"
-#: term-utils/mesg.c:144
#, fuzzy
-msgid "write access to your terminal is allowed"
-msgstr "寫入存取到您的終端機被允許"
+#~ msgid ""
+#~ "Warning: partition %s has size %d.%d TB (%llu bytes),\n"
+#~ "which is larger than the %llu bytes limit imposed\n"
+#~ "by the DOS partition table for %d-byte sectors\n"
+#~ msgstr ""
+#~ "警告：分割 %s 有大小 %d.%d TB (%llu 位元組)，\n"
+#~ "該項是大於 %llu 位元組限制施加\n"
+#~ "由 DOS 分割表用於 %d-byte 磁區\n"
-#: term-utils/mesg.c:150
#, fuzzy
-msgid "write access to your terminal is denied"
-msgstr "寫入存取到您的終端機被拒絕"
+#~ msgid ""
+#~ "Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
+#~ "which exceeds the DOS partition table limit of %llu sectors\n"
+#~ msgstr ""
+#~ "警告：分割 %s 開始於磁區 %llu (%d.%d TB 用於 %d-byte 磁區)，\n"
+#~ "該項超出 DOS 分割表限制的 %llu 磁區\n"
-#: term-utils/mesg.c:153
-#, fuzzy, c-format
-msgid "invalid argument: %s"
-msgstr "無效的引數：%s"
+#~ msgid ""
+#~ "Among the primary partitions, at most one can be extended\n"
+#~ " (although this is not a problem under Linux)\n"
+#~ msgstr ""
+#~ "在主要分割區之中，最多只能有一個是擴充分割區\n"
+#~ "(雖然這在 Linux 之下並不是個問題)\n"
-#: term-utils/script.c:122
-#, fuzzy, c-format
-msgid ""
-"output file `%s' is a link\n"
-"Use --force if you really want to use it.\n"
-"Program not started."
-msgstr ""
-"輸出檔案『%s』是鏈結\n"
-"使用 --force 如果您真的要使用它。\n"
-"程式無法開始。"
+#~ msgid "Warning: partition %s does not start at a cylinder boundary\n"
+#~ msgstr "警告：分割區 %s 並非啟始於磁柱邊界\n"
-#: term-utils/script.c:132
-#, fuzzy, c-format
-msgid " %s [options] [file]\n"
-msgstr " %s [選項] [檔案]\n"
+#~ msgid "Warning: partition %s does not end at a cylinder boundary\n"
+#~ msgstr "警告：分割區 %s 並非結束於磁柱邊界\n"
-#: term-utils/script.c:135
-#, fuzzy
-msgid ""
-" -a, --append append the output\n"
-" -c, --command <command> run command rather than interactive shell\n"
-" -e, --return return exit code of the child process\n"
-" -f, --flush run flush after each write\n"
-" --force use output file even when it is a link\n"
-" -q, --quiet be quiet\n"
-" -t, --timing[=<file>] output timing data to stderr (or to FILE)\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-" -a, --append 附加輸出\n"
-" -c, --command <command> 運行命令而非互動式命令殼\n"
-" -e, --return 回傳離開代碼的子行程\n"
-" -f, --flush 運行清理之後每個寫入\n"
-" --force 使用輸出檔案甚至時它是鏈結\n"
-" -q, --quiet 是安靜的\n"
-" -t, --timing [=<檔案>] 輸出時機資料到標準勘誤 (或到檔案)\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#~ msgid ""
+#~ "Warning: more than one primary partition is marked bootable (active)\n"
+#~ "This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
+#~ msgstr ""
+#~ "警告：超過一個的主要分割區被標記為可開機的 (作用中)\n"
+#~ "這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
-#: term-utils/script.c:243
-#, c-format
-msgid "Script started, file is %s\n"
-msgstr "命令稿已啟動，檔案是 %s\n"
+#~ msgid ""
+#~ "Warning: usually one can boot from primary partitions only\n"
+#~ "LILO disregards the `bootable' flag.\n"
+#~ msgstr ""
+#~ "警告：通常只可以從主要分割區開機\n"
+#~ "LILO 並不理會「可開機的」旗標。\n"
-#: term-utils/script.c:367
-#, c-format
-msgid "Script started on %s"
-msgstr "命令稿啟動於 %s"
+#~ msgid ""
+#~ "Warning: no primary partition is marked bootable (active)\n"
+#~ "This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
+#~ msgstr ""
+#~ "警告：沒有主要分割區被標記為可開機的 (作用中)\n"
+#~ "這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
-#: term-utils/script.c:403
-#, fuzzy
-msgid "cannot write script file"
-msgstr "無法寫入指令稿檔案"
+#~ msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "分割區 %s：啟始：(c,h,s) 預期為 (%ld ,%ld ,%ld) 但找到 (%ld ,%ld ,%ld)\n"
-#: term-utils/script.c:489
-#, c-format
-msgid ""
-"\n"
-"Script done on %s"
-msgstr ""
-"\n"
-"命令稿已於 %s 完成"
+#~ msgid "end"
+#~ msgstr "結束"
-#: term-utils/script.c:499
-#, c-format
-msgid "Script done, file is %s\n"
-msgstr "命令稿已完成，檔案是 %s\n"
+#~ msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
+#~ msgstr "分割區 %s：結束：(c,h,s) 預期為 (%ld ,%ld ,%ld) 找到 (%ld ,%ld ,%ld)\n"
-#: term-utils/script.c:521
-#, fuzzy
-msgid "openpty failed"
-msgstr "openpty 失敗"
+#~ msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
+#~ msgstr "分割區 %s 結束於磁柱 %ld，位於磁碟的末端之後\n"
-#: term-utils/script.c:557
#, fuzzy
-msgid "out of pty's"
-msgstr "發信匣的 pty's"
+#~ msgid ""
+#~ "Warning: shifted start of the extd partition from %lld to %lld\n"
+#~ "(For listing purposes only. Do not change its contents.)\n"
+#~ msgstr ""
+#~ "警告：Shift 的開始的 extd 分割從 %lld 到 %lld\n"
+#~ "(用於列表宗旨只有。不變更它的內容.)\n"
-#: term-utils/scriptreplay.c:42
-#, fuzzy, c-format
-msgid " %s [-t] timingfile [typescript] [divisor]\n"
-msgstr " %s [-t] timingfile [typescript] [除數]\n"
+#~ msgid ""
+#~ "Warning: extended partition does not start at a cylinder boundary.\n"
+#~ "DOS and Linux will interpret the contents differently.\n"
+#~ msgstr ""
+#~ "警告：擴充分割區非啟始於磁柱邊界。\n"
+#~ "DOS 和 Linux 將對內容有不同解譯。\n"
-#: term-utils/scriptreplay.c:46
-#, fuzzy
-msgid ""
-" -t, --timing <file> script timing output file\n"
-" -s, --typescript <file> script terminal session output file\n"
-" -d, --divisor <num> speed up or slow down execution with time divisor\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-" -t, --timing <file> 指令稿時機輸出檔案\n"
-" -s, --typescript<檔案>指令稿終端機作業階段輸出檔案\n"
-" -d, --divisor<num> 加速或拖慢執行與時間除數\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#~ msgid "ERROR: sector %lu does not have an msdos signature\n"
+#~ msgstr "錯誤：磁區 %lu 沒有 msdos 簽章\n"
-#: term-utils/scriptreplay.c:65
-#, c-format
-msgid "expected a number, but got '%s'"
-msgstr "預期一個數字，但是卻得到「%s」"
+#, fuzzy
+#~ msgid "too many partitions - ignoring those past nr (%zu)\n"
+#~ msgstr "太多分割區 - 忽略那些過去 nr (%ld)\n"
-#: term-utils/scriptreplay.c:68 term-utils/scriptreplay.c:72
-#, c-format
-msgid "divisor '%s'"
-msgstr "除數「%s」"
+#~ msgid "tree of partitions?\n"
+#~ msgstr "分割區的樹狀圖？\n"
-#: term-utils/scriptreplay.c:116
-msgid "write to stdout failed"
-msgstr "寫入標準輸出時失敗"
+#~ msgid "detected Disk Manager - unable to handle that\n"
+#~ msgstr "偵測到磁碟管理員 - 無法處理它\n"
-#: term-utils/scriptreplay.c:122
-#, c-format
-msgid "unexpected end of file on %s"
-msgstr "未預期的檔案結束於 %s"
+#~ msgid "DM6 signature found - giving up\n"
+#~ msgstr "找到 DM6 簽章 - 放棄\n"
-#: term-utils/scriptreplay.c:124
-#, c-format
-msgid "failed to read typescript file %s"
-msgstr "讀取 typescript 檔案 %s 時失敗"
+#~ msgid "strange..., an extended partition of size 0?\n"
+#~ msgstr "很奇怪…，大小為 0 的擴充分割區？\n"
-#: term-utils/scriptreplay.c:185
-#, fuzzy
-msgid "wrong number of arguments"
-msgstr "錯誤的引數數量"
+#~ msgid "strange..., a BSD partition of size 0?\n"
+#~ msgstr "很奇怪…，大小為 0 的 BSD 分割區？\n"
-#: term-utils/scriptreplay.c:215
-#, c-format
-msgid "failed to read timing file %s"
-msgstr "讀取時序檔案 %s 時失敗"
+#~ msgid "-n flag was given: Nothing changed\n"
+#~ msgstr "-n 旗標已給定：沒有改變任何東西\n"
-#: term-utils/scriptreplay.c:217
-#, c-format
-msgid "timings file %s: %lu: unexpected format"
-msgstr "時序檔案 %s：%lu：未預期的格式"
+#~ msgid "Failed saving the old sectors - aborting\n"
+#~ msgstr "儲存舊的磁區時失敗 - 放棄\n"
-#: term-utils/setterm.c:674
-#, fuzzy
-msgid "Argument error."
-msgstr "引數錯誤。"
+#~ msgid "Failed writing the partition on %s\n"
+#~ msgstr "寫入分割區於 %s 時失敗\n"
-#: term-utils/setterm.c:681
#, fuzzy
-msgid " -term <terminal_name>\n"
-msgstr " [ -term terminal_name]\n"
+#~ msgid "long or incomplete input line - quitting"
+#~ msgstr "長或不完整輸入列 - 離開"
-#: term-utils/setterm.c:682
#, fuzzy
-msgid " -reset\n"
-msgstr " [ -reset ]\n"
+#~ msgid "input error: `=' expected after %s field"
+#~ msgstr "輸入錯誤：『=』預期的之後 %s 欄位"
-#: term-utils/setterm.c:683
#, fuzzy
-msgid " -initialize\n"
-msgstr " [ -initialize ]\n"
+#~ msgid "unrecognized input: %s"
+#~ msgstr "無法辨識的輸入：%s"
-#: term-utils/setterm.c:684
-#, fuzzy
-msgid " -cursor <on|off>\n"
-msgstr " [ -cursor [on|off] ]\n"
+#~ msgid "number too big\n"
+#~ msgstr "數字太大\n"
-#: term-utils/setterm.c:685
-#, fuzzy
-msgid " -repeat <on|off>\n"
-msgstr " [ -repeat [on|off] ]\n"
+#~ msgid "trailing junk after number\n"
+#~ msgstr "數字之後尾隨無用物\n"
-#: term-utils/setterm.c:686
-#, fuzzy
-msgid " -appcursorkeys <on|off>\n"
-msgstr " [ -appcursorkeys [on|off] ]\n"
+#~ msgid "no room for partition descriptor\n"
+#~ msgstr "沒有空間可用於分割區描述\n"
-#: term-utils/setterm.c:687
-#, fuzzy
-msgid " -linewrap <on|off>\n"
-msgstr " [ -linewrap [on|off] ]\n"
+#~ msgid "cannot build surrounding extended partition\n"
+#~ msgstr "無法圍繞擴充分割區建立\n"
-#: term-utils/setterm.c:688
-#, fuzzy
-msgid " -default\n"
-msgstr " [ -default ]\n"
+#~ msgid "too many input fields\n"
+#~ msgstr "太多輸入欄位\n"
-#: term-utils/setterm.c:689
-msgid " -foreground <default|black|blue|cyan|green|magenta|red|white|yellow>\n"
-msgstr ""
+#~ msgid "No room for more\n"
+#~ msgstr "沒有空間可容納更多\n"
-#: term-utils/setterm.c:690
-msgid " -background <default|black|blue|cyan|green|magenta|red|white|yellow>\n"
-msgstr ""
+#~ msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
+#~ msgstr "警告：給定的大小 (%lu) 超出所允許的最大值 (%lu)\n"
-#: term-utils/setterm.c:691 term-utils/setterm.c:692
-msgid ""
-" -ulcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>\n"
-msgstr ""
+#~ msgid "Warning: empty partition\n"
+#~ msgstr "警告：空的分割區\n"
-#: term-utils/setterm.c:693 term-utils/setterm.c:694
-msgid ""
-" -hbcolor <black|blue|bright|cyan|green|grey|magenta|red|white|yellow>\n"
-msgstr ""
+#~ msgid "Warning: bad partition start (earliest %lu)\n"
+#~ msgstr "警告：不當的分割區啟始 (最先 %lu)\n"
-#: term-utils/setterm.c:695
-#, fuzzy
-msgid " -inversescreen <on|off>\n"
-msgstr " [ -inversescreen [on|off] ]\n"
+#~ msgid "unrecognized bootable flag - choose - or *\n"
+#~ msgstr "無法辨識的可開機旗標 - 選擇 - 或 *\n"
-#: term-utils/setterm.c:696
-#, fuzzy
-msgid " -bold <on|off>\n"
-msgstr " [ -bold [on|off] ]\n"
+#~ msgid "partial c,h,s specification?\n"
+#~ msgstr "部分 c,h,s 規格？\n"
-#: term-utils/setterm.c:697
-#, fuzzy
-msgid " -half-bright <on|off>\n"
-msgstr " [ -half-bright [on|off] ]\n"
+#~ msgid "Extended partition not where expected\n"
+#~ msgstr "擴充分割區不在預期的位置\n"
-#: term-utils/setterm.c:698
#, fuzzy
-msgid " -blink <on|off>\n"
-msgstr " [ -blink [on|off] ]\n"
+#~ msgid "bad input"
+#~ msgstr "不當的輸入"
-#: term-utils/setterm.c:699
-#, fuzzy
-msgid " -reverse <on|off>\n"
-msgstr " [ -reverse [on|off] ]\n"
+#~ msgid "too many partitions\n"
+#~ msgstr "太多分割區\n"
-#: term-utils/setterm.c:700
-#, fuzzy
-msgid " -underline <on|off>\n"
-msgstr " [ -underline [on|off] ]\n"
+#~ msgid ""
+#~ "Input in the following format; absent fields get a default value.\n"
+#~ "<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
+#~ "Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
+#~ msgstr ""
+#~ "以下列的格式輸入；缺值欄位將取得預設值。\n"
+#~ "<啟始> <大小> <類型 [E,S,L,X, 十六進位]> <可開機 [-,*]> <c,h,s> <c,h,s>\n"
+#~ "常常您只有需要指定 <啟始> 和 <大小> (也許還有 <類型>)。\n"
-#: term-utils/setterm.c:701
#, fuzzy
-msgid " -store\n"
-msgstr " [ -store ]\n"
+#~ msgid " %s [options] <device> [...]\n"
+#~ msgstr " %s [選項] <device> [...]\n"
-#: term-utils/setterm.c:702
#, fuzzy
-msgid " -clear <all|rest>\n"
-msgstr " [ -clear [all|rest] ]\n"
+#~ msgid ""
+#~ " -s, --show-size list size of a partition\n"
+#~ " -c, --id change or print partition Id\n"
+#~ " --change-id change Id\n"
+#~ " --print-id print Id\n"
+#~ msgstr ""
+#~ " -s, --show-size 清單大小的分割\n"
+#~ " -c, --id 變更或列印分割識別號\n"
+#~ " --change-id 變更識別號\n"
+#~ " --print-id 列印識別號\n"
-#: term-utils/setterm.c:703
#, fuzzy
-msgid " -tabs <tab1 tab2 tab3 ...> (tabn = 1-160)\n"
-msgstr " [ -tabs [ tab1 tab2 tab3 … ] ] (tabn = 1-160)\n"
+#~ msgid ""
+#~ " -l, --list list partitions of each device\n"
+#~ " -d, --dump idem, but in a format suitable for later input\n"
+#~ " -i, --increment number cylinders etc. from 1 instead of from 0\n"
+#~ " -u, --unit <letter> units to be used; <letter> can be one of\n"
+#~ " S (sectors), C (cylinders), B (blocks), or M (MB)\n"
+#~ msgstr ""
+#~ " -l, --list 清單分割區的每個裝置\n"
+#~ " -d, --dump idem，但是在中格式適用稍後輸入\n"
+#~ " -i, --increment 數字磁柱等項從 1 以代替從 0\n"
+#~ " -u, --unit <letter> 單位為使用；<字母>可以是之一\n"
+#~ " S (磁區)，C (磁柱)，B (區塊)，或公尺 (MB)\n"
-#: term-utils/setterm.c:704
#, fuzzy
-msgid " -clrtabs <tab1 tab2 tab3 ...> (tabn = 1-160)\n"
-msgstr " [ -clrtabs [ tab1 tab2 tab3 … ] ] (tabn = 1-160)\n"
+#~ msgid ""
+#~ " -1, --one-only reserved option that does nothing currently\n"
+#~ " -T, --list-types list the known partition types\n"
+#~ " -D, --DOS for DOS-compatibility: waste a little space\n"
+#~ " -E, --DOS-extended DOS extended partition compatibility\n"
+#~ " -R, --re-read make the kernel reread the partition table\n"
+#~ msgstr ""
+#~ " -1, --one-only 保留的選項該沒做任何事目前\n"
+#~ " -T, --list-types 清單已知分割區類型\n"
+#~ " -D, --DOS 用於 DOS-compatibility：waste 小型空格\n"
+#~ " -E, --DOS-extended DOS 進階分割相容性\n"
+#~ " -R, --re-read 製作內核重新讀取分割表\n"
-#: term-utils/setterm.c:705
#, fuzzy
-msgid " -regtabs <1-160>\n"
-msgstr " [ -regtabs [1-160] ]\n"
+#~ msgid ""
+#~ " -N <number> change only the partition with this <number>\n"
+#~ " -n do not actually write to disk\n"
+#~ " -O <file> save the sectors that will be overwritten to <file>\n"
+#~ " -I <file> restore sectors from <file>\n"
+#~ msgstr ""
+#~ " -N <number> 變更只有分割與這個<數字>\n"
+#~ " -n 不實際的寫入磁碟\n"
+#~ " -O<檔案> 儲存磁區該將被覆寫到<檔案>\n"
+#~ " -I<檔案> 還原磁區從<檔案>\n"
-#: term-utils/setterm.c:706
#, fuzzy
-msgid " -blank <0-60|force|poke>\n"
-msgstr " [ -blank [0-60|force|poke] ]\n"
+#~ msgid ""
+#~ " -V, --verify check that the listed partitions are reasonable\n"
+#~ " -v, --version display version information and exit\n"
+#~ " -h, --help display this help text and exit\n"
+#~ msgstr ""
+#~ " -V, --verify 檢查該清單的分割區是 reasonable\n"
+#~ " -v, --version 顯示版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明文字然後離開\n"
-#: term-utils/setterm.c:707
#, fuzzy
-msgid " -dump <1-NR_CONSOLES>\n"
-msgstr " [ -dump [1-NR_CONSOLES] ]\n"
+#~ msgid ""
+#~ "\n"
+#~ "Dangerous options:\n"
+#~ msgstr ""
+#~ "\n"
+#~ "危險選項：\n"
-#: term-utils/setterm.c:708
#, fuzzy
-msgid " -append <1-NR_CONSOLES>\n"
-msgstr " [ -append [1-NR_CONSOLES] ]\n"
+#~ msgid ""
+#~ " -f, --force disable all consistency checking\n"
+#~ " --no-reread do not check whether the partition is in use\n"
+#~ " -q, --quiet suppress warning messages\n"
+#~ " -L, --Linux do not complain about things irrelevant for Linux\n"
+#~ msgstr ""
+#~ " -f, --force 全部停用一致性檢查\n"
+#~ " --no-reread 不檢查是否分割是在中使用\n"
+#~ " -q, --quiet 抑制警告訊息\n"
+#~ " -L, --Linux 不抱怨關於 irrelevant 用於 Linux\n"
-#: term-utils/setterm.c:709
#, fuzzy
-msgid " -file dumpfilename\n"
-msgstr " -l 列出所有檔名\n"
+#~ msgid ""
+#~ " -g, --show-geometry print the kernel's idea of the geometry\n"
+#~ " -G, --show-pt-geometry print geometry guessed from the partition table\n"
+#~ msgstr ""
+#~ " -g, --show-geometry 列印內核主意的幾何位置\n"
+#~ " -G, --show-pt-geometry 列印幾何位置猜測的從分割表\n"
-#: term-utils/setterm.c:710
#, fuzzy
-msgid " -msg <on|off>\n"
-msgstr " [ -msg [on|off] ]\n"
+#~ msgid ""
+#~ " -A, --activate[=<device>] activate bootable flag\n"
+#~ " -U, --unhide[=<dev>] set partition unhidden\n"
+#~ " -x, --show-extended also list extended partitions in the output,\n"
+#~ " or expect descriptors for them in the input\n"
+#~ msgstr ""
+#~ " -A, --activate [=<device>] 啟用可開機的旗標\n"
+#~ " -U, --unhide [=<dev>] 設定分割 unhidden\n"
+#~ " -x, --show-extended 也清單進階分割區在中輸出，\n"
+#~ " 或預期描述元用於它們在中輸入\n"
-#: term-utils/setterm.c:711
#, fuzzy
-msgid " -msglevel <0-8>\n"
-msgstr " [ -msglevel [0-8] ]\n"
+#~ msgid ""
+#~ " --leave-last do not allocate the last cylinder\n"
+#~ " --IBM same as --leave-last\n"
+#~ msgstr ""
+#~ " --leave-last 不配置最後一筆磁柱\n"
+#~ " --IBM 如同 --leave-last\n"
-#: term-utils/setterm.c:712
#, fuzzy
-msgid " -powersave <on|vsync|hsync|powerdown|off>\n"
-msgstr " [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
+#~ msgid ""
+#~ " --in-order partitions are in order\n"
+#~ " --not-in-order partitions are not in order\n"
+#~ " --inside-outer all logicals inside outermost extended\n"
+#~ " --not-inside-outer not all logicals inside outermost extended\n"
+#~ msgstr ""
+#~ " --in-order 分割區是在中排序\n"
+#~ " --not-in-order 分割區不是在中排序\n"
+#~ " --inside-outer 所有邏輯的內部 outermost 進階\n"
+#~ " --not-inside-outer 並非所有邏輯的內部 outermost 進階\n"
-#: term-utils/setterm.c:713
#, fuzzy
-msgid " -powerdown <0-60>\n"
-msgstr " [ -powerdown [0-60] ]\n"
+#~ msgid ""
+#~ " --nested every partition is disjoint from all others\n"
+#~ " --chained like nested, but extended partitions may lie outside\n"
+#~ " --onesector partitions are mutually disjoint\n"
+#~ msgstr ""
+#~ " --nested 每分割是 disjoint 從所有其他人\n"
+#~ " --chained 如同巢狀，但是進階分割區也許會 lie 外側\n"
+#~ " --onesector 分割區是交互 disjoint\n"
-#: term-utils/setterm.c:714
#, fuzzy
-msgid " -blength <0-2000>\n"
-msgstr " [ -blength [0-2000] ]\n"
+#~ msgid ""
+#~ "\n"
+#~ "Override the detected geometry using:\n"
+#~ " -C, --cylinders <number> set the number of cylinders to use\n"
+#~ " -H, --heads <number> set the number of heads to use\n"
+#~ " -S, --sectors <number> set the number of sectors to use\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "強制變更偵測到幾何位置使用：\n"
+#~ " -C, --cylinders <number> 設定磁柱數量以使用\n"
+#~ " -H, --heads<數字> 設定前端數量以使用\n"
+#~ " -S, --sectors<數字> 設定磁區數量以使用\n"
+#~ "\n"
-#: term-utils/setterm.c:715
-#, fuzzy
-msgid " -bfreq freqnumber\n"
-msgstr " [ -bfreq 頻率數 ]\n"
+#~ msgid "%s device\t\t list active partitions on device\n"
+#~ msgstr "%s 裝置\t\t 列出裝置上的作用中分割區\n"
-#: term-utils/setterm.c:716
-msgid " -version\n"
-msgstr ""
+#~ msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
+#~ msgstr "%s 裝置 n1 n2…啟用分割區 n1…, 停用其餘的\n"
-#: term-utils/setterm.c:717
-msgid " -help\n"
-msgstr ""
+#~ msgid "%s -An device\t activate partition n, inactivate the other ones\n"
+#~ msgstr "%s -An 裝置\t 啟用分割區 n, 停用另外一個\n"
-#: term-utils/setterm.c:1072
#, fuzzy
-msgid "cannot force blank"
-msgstr "無法強制空白"
+#~ msgid "invalid number of partitions argument"
+#~ msgstr "無效的分割區數量引數"
-#: term-utils/setterm.c:1076
#, fuzzy
-msgid "cannot force unblank"
-msgstr "無法強制 unblank"
+#~ msgid "usage: sfdisk --print-id device partition-number"
+#~ msgstr "用法：sfdisk --print-id 裝置分割區編號"
-#: term-utils/setterm.c:1082
#, fuzzy
-msgid "cannot get blank status"
-msgstr "無法提取空白狀態"
+#~ msgid "usage: sfdisk --change-id device partition-number Id"
+#~ msgstr "用法：sfdisk --change-id 裝置分割區編號識別號"
-#: term-utils/setterm.c:1094
#, fuzzy
-msgid "cannot (un)set powersave mode"
-msgstr "無法 (un) 設定 powersave 模式"
-
-#: term-utils/setterm.c:1114
-#, fuzzy, c-format
-msgid "can not open dump file %s for output"
-msgstr "無法開啟傾印檔案 %s 用於輸出"
+#~ msgid "usage: sfdisk --id device partition-number [Id]"
+#~ msgstr "用法：sfdisk --id 裝置分割區編號 [識別號]"
-#: term-utils/setterm.c:1131 term-utils/setterm.c:1139
#, fuzzy
-msgid "klogctl error"
-msgstr "klogctl 錯誤"
+#~ msgid "can specify only one device (except with -l or -s)"
+#~ msgstr "可以指定只有一個裝置 (除了與 -l 或 -s)"
-#: term-utils/setterm.c:1207
#, fuzzy
-msgid "Error writing screendump"
-msgstr "寫入 screendump 時發生錯誤"
+#~ msgid "cannot open %s read-write"
+#~ msgstr "無法開啟 %s 可讀可寫"
-#: term-utils/setterm.c:1217
-#, fuzzy, c-format
-msgid "Couldn't read %s"
-msgstr "無法讀取 %s"
-
-#: term-utils/setterm.c:1219
#, fuzzy
-msgid "Couldn't read neither /dev/vcsa0 nor /dev/vcsa"
-msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
+#~ msgid "cannot open %s for reading"
+#~ msgstr "無法開啟 %s 用於讀取"
-#: term-utils/setterm.c:1276
-#, fuzzy
-msgid "$TERM is not defined."
-msgstr "$TERM 未被定義。"
+#~ msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
+#~ msgstr "%s：%ld 磁柱，%ld 磁頭，%ld 磁區/磁軌\n"
-#: term-utils/setterm.c:1284
-#, fuzzy
-msgid "terminfo database cannot be found"
-msgstr "terminfo 資料庫無法找到"
+#~ msgid "bad active byte: 0x%x instead of 0x80\n"
+#~ msgstr "不當的作用中位元組：0x%x 而非 0x80\n"
-#: term-utils/setterm.c:1286
-#, fuzzy, c-format
-msgid "%s: unknown terminal type"
-msgstr "%s：不明終端機類型"
+#~ msgid ""
+#~ "Done\n"
+#~ "\n"
+#~ msgstr ""
+#~ "完成\n"
+#~ "\n"
-#: term-utils/setterm.c:1288
-#, fuzzy
-msgid "terminal is hardcopy"
-msgstr "終端機是 hardcopy"
+#~ msgid ""
+#~ "You have %d active primary partitions. This does not matter for LILO,\n"
+#~ "but the DOS MBR will only boot a disk with 1 active partition.\n"
+#~ msgstr ""
+#~ "您有 %d 塊作用中的主要分割區。這個不會影響到 LILO，\n"
+#~ "但是 DOS MBR 只能將具有一塊作用中分割區的磁碟開機。\n"
-#: term-utils/ttymsg.c:77
#, fuzzy
-msgid "internal error: too many iov's"
-msgstr "內部錯誤"
-
-#: term-utils/ttymsg.c:87
-#, c-format
-msgid "excessively long line arg"
-msgstr "過長的命令列引數"
-
-#: term-utils/ttymsg.c:142
-#, c-format
-msgid "cannot fork"
-msgstr "無法衍生執行"
-
-#: term-utils/ttymsg.c:146
-#, c-format
-msgid "fork: %s"
-msgstr "衍生：%s"
-
-#: term-utils/ttymsg.c:177
-#, fuzzy, c-format
-msgid "%s: BAD ERROR, message is far too long"
-msgstr "%s：不當的錯誤，訊息是 far 太長"
+#~ msgid "partition %s has id %x and is not hidden"
+#~ msgstr "分割 %s 有識別號 %x 和未被隱藏"
-#: term-utils/wall.c:82
-#, fuzzy, c-format
-msgid " %s [options] [<file> | <message>]\n"
-msgstr " %s [選項] [訊息]\n"
-
-#: term-utils/wall.c:84
#, fuzzy
-msgid " -n, --nobanner do not print banner, works only for root\n"
-msgstr " -i, --info 列印只有資訊關於取樣步驟\n"
+#~ msgid "Bad Id %lx"
+#~ msgstr "不當的識別號 %lx"
-#: term-utils/wall.c:85
#, fuzzy
-msgid " -t, --timeout <timeout> write timeout in seconds\n"
-msgstr " -t, --time <ms> 驅動程式等待時間在中毫秒\n"
+#~ msgid "Fatal error: cannot find %s"
+#~ msgstr "嚴重錯誤：找不到 %s"
-#: term-utils/wall.c:127
-#, fuzzy
-msgid "--nobanner is available only for root"
-msgstr "--nobanner 是可用只有用於根"
+#~ msgid "Warning: %s is not a block device\n"
+#~ msgstr "警告：%s 並非區塊裝置\n"
-#: term-utils/wall.c:132
-#, fuzzy, c-format
-msgid "invalid timeout argument: %s"
-msgstr "無效的逾時引數：%s"
+#, fuzzy
+#~ msgid "Partition %d does not exist, cannot change it"
+#~ msgstr "分割 %d 不存在，無法變更它"
-#: term-utils/wall.c:206
#, fuzzy
-msgid "cannot get passwd uid"
-msgstr "無法提取 passwd uid"
+#~ msgid ""
+#~ "I don't like these partitions - nothing changed.\n"
+#~ "(If you really want this, use the --force option.)"
+#~ msgstr ""
+#~ "我不如同這些分割區 - 沒有任何東西變更。\n"
+#~ "(如果您真的要想要這個，使用 --force 選項.)"
+
+#~ msgid "I don't like this - probably you should answer No\n"
+#~ msgstr "我不喜歡這個 - 您也許應該回答 No\n"
+
+#~ msgid "Are you satisfied with this? [ynq] "
+#~ msgstr "您滿意這個嗎？[ynq] "
-#: term-utils/wall.c:211
#, fuzzy
-msgid "cannot get tty name"
-msgstr "無法提取 tty 名稱"
+#~ msgid "Quitting - nothing changed"
+#~ msgstr "離開 - 沒有任何東西變更"
-#: term-utils/wall.c:229
-#, fuzzy, c-format
-msgid "Broadcast message from %s@%s (%s) (%s):"
-msgstr "廣播訊息來自 %s@%s"
+#~ msgid "Please answer one of y,n,q\n"
+#~ msgstr "請以 y,n,q 之一回答\n"
-#: term-utils/wall.c:264
-#, fuzzy, c-format
-msgid "will not read %s - use stdin."
-msgstr "將無法讀取 %s - 使用標準輸入。"
+#~ msgid ""
+#~ "Successfully wrote the new partition table\n"
+#~ "\n"
+#~ msgstr ""
+#~ "成功寫入新的分割表\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
+#~ "to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
+#~ "(See fdisk(8).)\n"
+#~ msgstr ""
+#~ "如果您建立或變更 DOS 分割區(假設是 /dev/foo7)，就得使用 dd(1)\n"
+#~ "將開頭的 512 位元組歸零：dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
+#~ "(參看 fdisk(8).)\n"
-#: term-utils/wall.c:303
#, fuzzy
-msgid "fread failed"
-msgstr "fread 失敗"
+#~ msgid "Partition %zd is already defined. Delete it before re-adding it."
+#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
-#: term-utils/write.c:82
-#, fuzzy, c-format
-msgid " %s [options] <user> [<ttyname>]\n"
-msgstr " %s [選項] <user> [<ttyname>]\n"
+#, fuzzy
+#~ msgid "field is too long"
+#~ msgstr "欄位太長"
-#: term-utils/write.c:86
#, fuzzy
-msgid ""
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#~ msgid "%s: '%c' is not allowed"
+#~ msgstr "%s：『%c』未被允許"
-#: term-utils/write.c:138
#, fuzzy
-msgid "can't find your tty's name"
-msgstr "æ\89¾ä¸\8då\88°æ\82¨ç\9a\84 tty's å\90\8d稱"
+#~ msgid "'%c' is not allowed"
+#~ msgstr "ã\80\8e%cã\80\8fæ\9cªè¢«å\85\81許"
-#: term-utils/write.c:151
#, fuzzy
-msgid "you have write permission turned off"
-msgstr "您有寫入權限被關閉"
+#~ msgid "%s: control characters are not allowed"
+#~ msgstr "%s：控制字元未被允許"
-#: term-utils/write.c:169
-#, fuzzy, c-format
-msgid "%s is not logged in on %s"
-msgstr "%s 未被登入於 %s"
+#, fuzzy
+#~ msgid "control characters are not allowed"
+#~ msgstr "控制字元未被允許"
-#: term-utils/write.c:175
-#, fuzzy, c-format
-msgid "%s has messages disabled on %s"
-msgstr "%s 有訊息已停用於 %s"
+#, fuzzy
+#~ msgid "can only change local entries."
+#~ msgstr "只能變更本地條目。"
-#: term-utils/write.c:270
-#, fuzzy, c-format
-msgid "%s is not logged in"
-msgstr "%s 未被登入"
+#, fuzzy
+#~ msgid "crypt() failed"
+#~ msgstr "意見調查() 失敗"
-#: term-utils/write.c:277
-#, fuzzy, c-format
-msgid "%s has messages disabled"
-msgstr "%s 有訊息已停用"
+#, fuzzy
+#~ msgid " %s [options] [-] [USER [arg]...]\n"
+#~ msgstr " %s [選項] [-] [使用者 [arg]...]\n"
-#: term-utils/write.c:279
-#, fuzzy, c-format
-msgid "%s is logged in more than once; writing to %s"
-msgstr "%s 被登入一次以上；寫入 %s"
+#, fuzzy
+#~ msgid " and do not create a new session\n"
+#~ msgstr " 「%s」)\n"
-#: term-utils/write.c:328
-#, fuzzy, c-format
-msgid "tty path %s too long"
-msgstr "tty 路徑 %s 太長"
+#, fuzzy
+#~ msgid ""
+#~ " -1, --one show only current month (default)\n"
+#~ " -3, --three show previous, current and next month\n"
+#~ " -s, --sunday Sunday as first day of week\n"
+#~ " -m, --monday Monday as first day of week\n"
+#~ " -j, --julian output Julian dates\n"
+#~ " -y, --year show whole current year\n"
+#~ " -V, --version display version information and exit\n"
+#~ " -h, --help display this help text and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -1, --one 只顯示當月 (預設)\n"
+#~ " -3, --three 顯示前一個、目前的和次月\n"
+#~ " -s, --sunday 週日做為先週中某日\n"
+#~ " -m, --monday 週一做為先週中某日\n"
+#~ " -j, --julian 輸出儒略曆約會\n"
+#~ " -y, --year 顯示整個目前的年\n"
+#~ " -V, --version 顯示版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ "\n"
-#: term-utils/write.c:346
-#, c-format
-msgid "Message from %s@%s (as %s) on %s at %s ..."
-msgstr "訊息來自 %s@%s (身分為 %s) 於 %s 在 %s …"
+#, fuzzy
+#~ msgid ""
+#~ " %1$s [options] LABEL=<label>\n"
+#~ " %1$s [options] UUID=<uuid>\n"
+#~ msgstr ""
+#~ " %1$s [選項] 標貼=<label>\n"
+#~ " %1$s [選項] UUID=<uuid>\n"
-#: term-utils/write.c:349
-#, c-format
-msgid "Message from %s@%s on %s at %s ..."
-msgstr "訊息來自 %s@%s 於 %s 在 %s …"
+#, fuzzy
+#~ msgid ""
+#~ " -A, --all disable all built-in filters, print all filesystems\n"
+#~ " -a, --ascii use ASCII chars for tree formatting\n"
+#~ " -c, --canonicalize canonicalize printed paths\n"
+#~ " -D, --df imitate the output of df(1)\n"
+#~ " -d, --direction <word> direction of search, 'forward' or 'backward'\n"
+#~ " -e, --evaluate convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
+#~ " to device names\n"
+#~ " -F, --tab-file <path> alternative file for --fstab, --mtab or --kernel options\n"
+#~ " -f, --first-only print the first found filesystem only\n"
+#~ msgstr ""
+#~ " -A, --all 全部停用內建篩選器，列印所有檔案系統\n"
+#~ " -a, --ascii 使用 ASCII 字元用於樹格式化\n"
+#~ " -c, --canonicalize 正則化列印的路徑\n"
+#~ " -D, --df imitate 輸出的 df (1)\n"
+#~ " -d, --direction <word> 方向的搜尋，『轉寄』或『退一步』\n"
+#~ " -e, --evaluate 轉換標籤 (標貼，UUID，PARTUUID，PARTLABEL)\n"
+#~ " 到裝置名稱\n"
+#~ " -F, --tab-file<路徑> 替代方案檔案用於 --fstab，--mtab 或 --kernel 選項\n"
+#~ " -f, --first-only 列印第一個找到檔案系統只有\n"
-#: term-utils/write.c:377
#, fuzzy
-msgid "carefulputc failed"
-msgstr "carefulputc 失敗"
+#~ msgid ""
+#~ " -i, --invert invert the sense of matching\n"
+#~ " -l, --list use list format output\n"
+#~ " -N, --task <tid> use alternative namespace (/proc/<tid>/mountinfo file)\n"
+#~ " -n, --noheadings don't print column headings\n"
+#~ " -u, --notruncate don't truncate text in columns\n"
+#~ msgstr ""
+#~ " -i, --invert 反向 sense 的匹配\n"
+#~ " -l, --list 使用清單格式輸出\n"
+#~ " -N, --task <tid> 使用替代方案命名空間 (/proc/<tid>/mountinfo 檔案)\n"
+#~ " -n, --noheadings 不列印欄標頭\n"
+#~ " -u, --notruncate 不截斷文字在中欄位\n"
-#: text-utils/col.c:125
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -b, --no-backspaces do not output backspaces\n"
-" -f, --fine permit forward half line feeds\n"
-" -p, --pass pass unknown control sequences\n"
-" -h, --tabs convert spaces to tabs\n"
-" -x, --spaces convert tabs to spaces\n"
-" -l, --lines NUM buffer at least NUM lines\n"
-" -V, --version output version information and exit\n"
-" -H, --help display this help and exit\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -b, --no-backspaces 不輸出退格\n"
-" -f, --fine 允許轉寄半送列\n"
-" -p, --pass 回合不明控制序列\n"
-" -h, --tabs 轉換空格轉為跳格\n"
-" -x, --spaces 轉換跳格轉為空格\n"
-" -l, --lines NUM 緩衝區至少 NUM 列\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -H, --help 顯示這份說明然後離開\n"
-"\n"
+#, fuzzy
+#~ msgid ""
+#~ " -v, --nofsroot don't print [/dir] for bind or btrfs mounts\n"
+#~ " -R, --submounts print all submounts for the matching filesystems\n"
+#~ " -S, --source <string> the device to mount (by name, maj:min, \n"
+#~ " LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
+#~ " -T, --target <string> the mountpoint to use\n"
+#~ msgstr ""
+#~ " -v, --nofsroot 不列印 [/dir] 用於繫結或 btrfs 掛載\n"
+#~ " -R, --submounts 列印所有 submounts 用於匹配檔案系統\n"
+#~ " -S, --source <string> 裝置到掛載 (依名稱，maj：最小，\n"
+#~ " 標貼=, UUID=, PARTUUID=, PARTLABEL=)\n"
+#~ " -T, --target<字串> mountpoint 以使用\n"
-#: text-utils/col.c:136 text-utils/colrm.c:67
-#, fuzzy, c-format
-msgid ""
-"%s reads from standard input and writes to standard output\n"
-"\n"
-msgstr ""
-"%s 讀取從標準輸入和寫入標準輸出\n"
-"\n"
+#, fuzzy
+#~ msgid " -V, --version Output version information\n"
+#~ msgstr " -V, --version 輸出版本資訊\n"
-#: text-utils/col.c:199
#, fuzzy
-msgid "bad -l argument"
-msgstr "不當的 -l 引數"
+#~ msgid ""
+#~ " -d, --udp use UDP only\n"
+#~ " -i, --id log the process ID too\n"
+#~ " -f, --file <file> log the contents of this file\n"
+#~ " -h, --help display this help text and exit\n"
+#~ msgstr ""
+#~ " -d, --udp 使用 UDP (TCP 是預設)\n"
+#~ " -i, --id 記錄檔處理識別號太\n"
+#~ " -f, --file <file> 記錄檔內容的這個檔案\n"
+#~ " -h, --help 顯示這份說明文字然後離開\n"
-#: text-utils/col.c:324
-#, fuzzy, c-format
-msgid "warning: can't back up %s."
-msgstr "警告：無法上一步向上 %s。"
+#, fuzzy
+#~ msgid ""
+#~ " -n, --server <name> write to this remote syslog server\n"
+#~ " -P, --port <number> use this UDP port\n"
+#~ " -p, --priority <prio> mark given message with this priority\n"
+#~ " -s, --stderr output message to standard error as well\n"
+#~ msgstr ""
+#~ " -n, --server <name> 寫入這個遠端 syslog 伺服器\n"
+#~ " -P, --port<數字> 使用這個 UDP 通訊埠\n"
+#~ " -p, --priority<prio>標記給定的訊息與這個優先權\n"
+#~ " -s, --stderr 輸出訊息到標準錯誤同樣\n"
-#: text-utils/col.c:325
-msgid "past first line"
-msgstr "略過第一列"
+#, fuzzy
+#~ msgid ""
+#~ " -t, --tag <tag> mark every line with this tag\n"
+#~ " -u, --socket <socket> write to this Unix socket\n"
+#~ " -V, --version output version information and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -t, --tag <tag> 標記每列與這個標籤\n"
+#~ " -u, --socket<通訊端>寫入這個 Unix 通訊端\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ "\n"
-#: text-utils/col.c:325
-msgid "-- line already flushed"
-msgstr "-- 列已經清理"
+#, fuzzy
+#~ msgid ""
+#~ " -a, --alternative use alternative dictionary\n"
+#~ " -d, --alphanum compare only alphanumeric characters\n"
+#~ " -f, --ignore-case ignore case differences when comparing\n"
+#~ " -t, --terminate <char> define string termination character\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -a, --alternative 使用交替字典\n"
+#~ " -d, --alphanum 比較只有 alpha 數字字元\n"
+#~ " -f, --ignore-case 忽略時比較\n"
+#~ " -t, --terminate <char> 定義字串終止字元\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
-#: text-utils/colcrt.c:315
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [options] [file ...]\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %s [選項] [檔案...]\n"
+#, fuzzy
+#~ msgid ""
+#~ " -f, --file <file> use file as a cookie seed\n"
+#~ " -v, --verbose explain what is being done\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -f, --file <file> 使用檔案做為庫克種子\n"
+#~ " -v, --verbose 解釋什麼正在是已完成\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
-#: text-utils/colcrt.c:319
-#, fuzzy, c-format
-msgid ""
-" -, --no-underlining suppress all underlining\n"
-" -2, --half-lines print all half-lines\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-" -, --no-underlining 抑制所有底線\n"
-" -2, --half-lines 列印所有 half-lines\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#, fuzzy
+#~ msgid " %s [options] pathname [pathname ...]\n"
+#~ msgstr " %s [選項] 路徑名稱 [路徑名稱...]\n"
-#: text-utils/colrm.c:59
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [startcol [endcol]]\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %s [startcol [endcol]]\n"
+#~ msgid ""
+#~ "\n"
+#~ "For more information see namei(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 namei(1)。\n"
-#: text-utils/colrm.c:63
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#, fuzzy
+#~ msgid "Failed to open/create %s: %m\n"
+#~ msgstr "開啟時失敗/建立 %s：%m\n"
-#: text-utils/colrm.c:185
#, fuzzy
-msgid "first argument"
-msgstr "第一個引數"
+#~ msgid "Failed to lock %s: %m\n"
+#~ msgstr "鎖定 %s 時失敗：%m\n"
+
+#~ msgid "Bad number: %s\n"
+#~ msgstr "不當的數字：%s\n"
-#: text-utils/colrm.c:187
#, fuzzy
-msgid "second argument"
-msgstr "秒引數"
+#~ msgid "Both --pid and --no-pid specified. Ignoring --no-pid.\n"
+#~ msgstr "兩者 --pid 和 --no-pid 指定的。忽略 --no-pid。\n"
-#: text-utils/column.c:92
-#, fuzzy, c-format
-msgid " %s [options] [<file>...]\n"
-msgstr " %s [選項] [<file>]\n"
+#~ msgid ""
+#~ "\n"
+#~ "For more information see wipefs(8).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 wipefs(8)。\n"
-#: text-utils/column.c:94
-msgid " -c, --columns <width> width of output in number of characters\n"
-msgstr ""
+#~ msgid "warning: error reading %s: %s"
+#~ msgstr "警告：讀取時發生錯誤 %s: %s"
-#: text-utils/column.c:95
-#, fuzzy
-msgid " -t, --table create a table\n"
-msgstr " -Q, --queue 建立訊息佇列\n"
+#~ msgid "warning: can't open %s: %s"
+#~ msgstr "警告：無法開啟 %s: %s"
-#: text-utils/column.c:96
-msgid " -s, --separator <string> possible table delimiters\n"
-msgstr ""
+#~ msgid "mount: could not open %s - using %s instead\n"
+#~ msgstr "mount：無法開啟 %s - 使用 %s 做為替代\n"
-#: text-utils/column.c:97
-msgid ""
-" -o, --output-separator <string>\n"
-" columns separator for table output; default is two "
-"spaces\n"
-msgstr ""
+#~ msgid "can't create lock file %s: %s (use -n flag to override)"
+#~ msgstr "無法建立鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
-#: text-utils/column.c:99
-#, fuzzy
-msgid " -x, --fillrows fill rows before columns\n"
-msgstr " -v, --verbose 是更多詳細的\n"
+#~ msgid "can't link lock file %s: %s (use -n flag to override)"
+#~ msgstr "無法鏈結鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
-#: text-utils/column.c:156
-#, fuzzy
-msgid "invalid columns argument"
-msgstr "無效的欄位引數"
+#~ msgid "can't open lock file %s: %s (use -n flag to override)"
+#~ msgstr "無法開啟鎖定檔案 %s: %s (使用 -n 旗標以強制變更)"
-#: text-utils/column.c:386
-#, fuzzy, c-format
-msgid "line %d is too long, output will be truncated"
-msgstr "列 %d 太長，輸出將被截斷"
+#~ msgid "Can't lock lock file %s: %s\n"
+#~ msgstr "無法鎖定已鎖定檔案 %s: %s\n"
-#: text-utils/display.c:262
-#, fuzzy
-msgid "all input file arguments failed"
-msgstr "所有輸入檔案引數失敗"
+#~ msgid "can't lock lock file %s: %s"
+#~ msgstr "無法鎖定已鎖定檔案 %s: %s"
+
+#~ msgid ""
+#~ "Cannot create link %s\n"
+#~ "Perhaps there is a stale lock file?\n"
+#~ msgstr ""
+#~ "無法建立鏈結 %s\n"
+#~ "也許有失去時效的鎖定檔案？\n"
-#: text-utils/hexdump.c:66
-#, fuzzy
-msgid ""
-"calling hexdump as od has been deprecated in favour to GNU coreutils od."
-msgstr "呼叫 hexdump 做為 od 已被不宜用在中 favour 到 GNU coreutils od。"
+#~ msgid "cannot open %s (%s) - mtab not updated"
+#~ msgstr "無法開啟 %s (%s) - mtab 尚未更新"
-#: text-utils/hexsyntax.c:142
-#, fuzzy, c-format
-msgid " %s [options] file...\n"
-msgstr " %s [選項] [檔案]\n"
+#~ msgid "error writing %s: %s"
+#~ msgstr "寫入 %s 時發生錯誤：%s"
-#: text-utils/hexsyntax.c:144
-msgid " -b, --one-byte-octal one-byte octal display\n"
-msgstr ""
+#~ msgid "error changing mode of %s: %s\n"
+#~ msgstr "變更 %s 模式時發生錯誤：%s\n"
-#: text-utils/hexsyntax.c:145
-msgid " -c, --one-byte-char one-byte character display\n"
-msgstr ""
+#~ msgid "error changing owner of %s: %s\n"
+#~ msgstr "變更 %s 的擁有者時發生錯誤：%s\n"
-#: text-utils/hexsyntax.c:146
-msgid " -C, --canonical canonical hex+ASCII display\n"
-msgstr ""
+#~ msgid ""
+#~ "\n"
+#~ "mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
+#~ " It's possible that information reported by mount(8) is not\n"
+#~ " up to date. For actual information about system mount points\n"
+#~ " check the /proc/mounts file.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "mount：警告：/etc/mtab 不可寫入 (例：唯讀檔案系統)。\n"
+#~ " 由 mount(8) 所報告的資訊有可能不是最新狀況。\n"
+#~ " 想要獲得有關系統掛載點的實際資訊，\n"
+#~ " 請檢查 /proc/mounts 檔案。\n"
+#~ "\n"
-#: text-utils/hexsyntax.c:147
-msgid " -d, --two-bytes-decimal two-byte decimal display\n"
-msgstr ""
+#~ msgid "mount: improperly quoted option string '%s'"
+#~ msgstr "mount：選項字串「%s」加入了不適當的引號"
-#: text-utils/hexsyntax.c:148
-msgid " -o, --two-bytes-octal two-byte octal display\n"
-msgstr ""
+#~ msgid "mount: translated %s '%s' to '%s'\n"
+#~ msgstr "mount：已翻譯 %s「%s」為「%s」\n"
-#: text-utils/hexsyntax.c:149
-msgid " -x, --two-bytes-hex two-byte hexadecimal display\n"
-msgstr ""
+#, fuzzy
+#~ msgid "mount: SELinux *context= options are ignore on remount.\n"
+#~ msgstr "掛載：SELinux * 語境=選項是忽略於 remount。\n"
-#: text-utils/hexsyntax.c:150
-msgid ""
-" -e, --format format format string to be used for displaying data\n"
-msgstr ""
+#~ msgid "mount: according to mtab, %s is already mounted on %s"
+#~ msgstr "mount：根據 mtab，%s 已經掛載到 %s"
-#: text-utils/hexsyntax.c:151
-msgid " -f, --format-file <file> file that contains format strings\n"
-msgstr ""
+#~ msgid "mount: according to mtab, %s is mounted on %s"
+#~ msgstr "mount：根據 mtab，%s 已經掛載到 %s"
-#: text-utils/hexsyntax.c:152
-msgid " -n, --length <length> interpret only length bytes of input\n"
-msgstr ""
+#~ msgid "mount: can't open %s for writing: %s"
+#~ msgstr "mount：無法開啟 %s 以用於寫入：%s"
-#: text-utils/hexsyntax.c:153
-msgid " -s, --skip <offset> skip offset bytes from the beginning\n"
-msgstr ""
+#~ msgid "mount: error writing %s: %s"
+#~ msgstr "mount：寫入時發生錯誤 %s: %s"
+
+#~ msgid "mount: error changing mode of %s: %s"
+#~ msgstr "mount：變更模式時發生錯誤 %s: %s"
-#: text-utils/hexsyntax.c:154
#, fuzzy
-msgid " -v, --no-squeezing output identical lines\n"
-msgstr " -u --unlock 移除鎖定\n"
+#~ msgid "mount: cannot set group id: %m"
+#~ msgstr "掛載：無法設定群組識別號：%m"
-#: text-utils/more.c:319
-#, fuzzy, c-format
-msgid ""
-"Usage: %s [options] file...\n"
-"\n"
-msgstr ""
-"用法：%s [選項] 檔案…\n"
-"\n"
+#, fuzzy
+#~ msgid "mount: cannot set user id: %m"
+#~ msgstr "掛載：無法設定使用者識別號：%m"
-#: text-utils/more.c:322
-#, fuzzy, c-format
-msgid ""
-"Options:\n"
-" -d display help instead of ring bell\n"
-" -f count logical, rather than screen lines\n"
-" -l suppress pause after form feed\n"
-" -p do not scroll, clean screen and display text\n"
-" -c do not scroll, display text and clean line ends\n"
-" -u suppress underlining\n"
-" -s squeeze multiple blank lines into one\n"
-" -NUM specify the number of lines per screenful\n"
-" +NUM display file beginning from line number NUM\n"
-" +/STRING display file beginning from search string match\n"
-" -V output version information and exit\n"
-msgstr ""
-"選項：\n"
-" -d 顯示說明以代替環響鈴\n"
-" -f 計數邏輯的，而非螢幕列\n"
-" -l 抑制暫停之後表格饋送\n"
-" -p 抑制捲動，清除螢幕和顯示文字\n"
-" -c 抑制捲動，顯示文字和清除列結束\n"
-" -u 抑制底線\n"
-" -s squeeze 多重空列進入一個\n"
-" -NUM 指定列號的各全螢幕\n"
-" +NUM 顯示檔案起始部分從列號 NUM\n"
-" +/字串 顯示檔案起始部分從搜尋字串匹配\n"
-" -V 輸出版本資訊然後離開\n"
+#~ msgid "mount: cannot fork: %s"
+#~ msgstr "mount：無法衍生執行：%s"
-#: text-utils/more.c:575
-#, fuzzy, c-format
-msgid "unknown option -%s"
-msgstr "不明選項 -%s"
+#~ msgid "Trying %s\n"
+#~ msgstr "嘗試 %s\n"
-#: text-utils/more.c:599
-#, c-format
-msgid ""
-"\n"
-"*** %s: directory ***\n"
-"\n"
-msgstr ""
-"\n"
-"*** %s: 目錄 ***\n"
-"\n"
+#~ msgid "mount: you didn't specify a filesystem type for %s\n"
+#~ msgstr "mount：您並未指定 %s 的檔案系統類型\n"
-#: text-utils/more.c:639
-#, c-format
-msgid ""
-"\n"
-"******** %s: Not a text file ********\n"
-"\n"
-msgstr ""
-"\n"
-"******** %s: 不是文字檔 ********\n"
-"\n"
+#~ msgid " I will try all types mentioned in %s or %s\n"
+#~ msgstr " 我將嘗試所有在 %s 或 %s 中提及的類型\n"
-#: text-utils/more.c:735
-#, c-format
-msgid "[Use q or Q to quit]"
-msgstr "[使用 q 或 Q 以離開]"
+#~ msgid " and it looks like this is swapspace\n"
+#~ msgstr " 而它看起來像是個置換空間\n"
-#: text-utils/more.c:806
-#, c-format
-msgid "--More--"
-msgstr "--更多--"
+#~ msgid " I will try type %s\n"
+#~ msgstr " 我將嘗試類型 %s\n"
-#: text-utils/more.c:808
-#, c-format
-msgid "(Next file: %s)"
-msgstr "(下一個檔案：%s)"
+#~ msgid "%s looks like swapspace - not mounted"
+#~ msgstr "%s 看起來像是置換空間 - 未掛載"
-#: text-utils/more.c:816
-#, c-format
-msgid "[Press space to continue, 'q' to quit.]"
-msgstr "[按下空格以繼續，「q」表示離開。]"
+#~ msgid ""
+#~ "mount: %s: more filesystems detected. This should not happen,\n"
+#~ " use -t <type> to explicitly specify the filesystem type or\n"
+#~ " use wipefs(8) to clean up the device.\n"
+#~ msgstr ""
+#~ "掛載：%s：偵測到多個檔案系統。這不應發生，\n"
+#~ " 使用 -t <type> 以明確指定檔案系統型態或\n"
+#~ " 使用 wipefs(8) 以清理裝置。\n"
-#: text-utils/more.c:1236
-#, c-format
-msgid "...back %d pages"
-msgstr "…倒退 %d 頁"
+#~ msgid "mount: only root can mount %s on %s"
+#~ msgstr "mount：只有 root 可以將 %s 掛載到 %s"
-#: text-utils/more.c:1238
-msgid "...back 1 page"
-msgstr "…倒退 1 頁"
+#~ msgid "mount: loop device specified twice"
+#~ msgstr "mount：環路裝置被指定了兩次"
-#: text-utils/more.c:1285
-msgid "...skipping one line"
-msgstr "…跳過 1 列"
+#~ msgid "mount: skipping the setup of a loop device\n"
+#~ msgstr "mount：跳過環路裝置的設定\n"
-#: text-utils/more.c:1287
-#, c-format
-msgid "...skipping %d lines"
-msgstr "…跳過 %d 列"
+#, fuzzy
+#~ msgid "mount: enabling autoclear loopdev flag\n"
+#~ msgstr "掛載：啟用 autoclear loopdev 旗標\n"
-#: text-utils/more.c:1323
-msgid ""
-"\n"
-"***Back***\n"
-"\n"
-msgstr ""
-"\n"
-"***倒退***\n"
-"\n"
+#~ msgid "mount: invalid offset '%s' specified"
+#~ msgstr "mount：指定了無效的偏移值「%s」"
+
+#~ msgid "mount: invalid sizelimit '%s' specified"
+#~ msgstr "mount：指定了無效的大小限制「%s」"
+
+#~ msgid "mount: according to mtab %s is already mounted on %s as loop"
+#~ msgstr "mount：根據 mtab %s 已被當做環路而掛載於 %s"
-#: text-utils/more.c:1338
#, fuzzy
-msgid "No previous regular expression"
-msgstr "沒有前一個正規表示式"
+#~ msgid "mount: tailed to initialize loopdev context"
+#~ msgstr "初始化 loopcxt 時失敗"
-#: text-utils/more.c:1368
-msgid ""
-"\n"
-"Most commands optionally preceded by integer argument k. Defaults in "
-"brackets.\n"
-"Star (*) indicates argument becomes new default.\n"
-msgstr ""
-"\n"
-"大部分命令可選用前導的整數引數 k。預設值位於中括號內。\n"
-"星號 (*) 用來指定引數成為新的預設值。\n"
+#, fuzzy
+#~ msgid "mount: failed to use %s device"
+#~ msgstr "%s：無法使用裝置"
-#: text-utils/more.c:1375
-msgid ""
-"<space> Display next k lines of text [current screen size]\n"
-"z Display next k lines of text [current screen size]*\n"
-"<return> Display next k lines of text [1]*\n"
-"d or ctrl-D Scroll k lines [current scroll size, initially 11]*\n"
-"q or Q or <interrupt> Exit from more\n"
-"s Skip forward k lines of text [1]\n"
-"f Skip forward k screenfuls of text [1]\n"
-"b or ctrl-B Skip backwards k screenfuls of text [1]\n"
-"' Go to place where previous search started\n"
-"= Display current line number\n"
-"/<regular expression> Search for kth occurrence of regular expression [1]\n"
-"n Search for kth occurrence of last r.e [1]\n"
-"!<cmd> or :!<cmd> Execute <cmd> in a subshell\n"
-"v Start up /usr/bin/vi at current line\n"
-"ctrl-L Redraw screen\n"
-":n Go to kth next file [1]\n"
-":p Go to kth previous file [1]\n"
-":f Display current file name and line number\n"
-". Repeat previous command\n"
-msgstr ""
-"<space> 顯示下一組 k 列文字 [目前螢幕大小]\n"
-"z 顯示下一組 k 列文字 [目前螢幕大小]*\n"
-"<return> 顯示下一組 k 列文字 [1]*\n"
-"d 或 ctrl-D 捲動 k 列 [目前捲動大小，初始值 11]*\n"
-"q 或 Q 或 <interrupt> 離開 more\n"
-"s 向前跳過 k 列文字 [1]\n"
-"f 向前跳過 k 全螢幕的文字 [1]\n"
-"b 或 ctrl-B 向後跳過 k 全螢幕的文字 [1]\n"
-"' 前往前一個搜尋開始的位置\n"
-"= 顯示目前列號\n"
-"/<正規表示式> 搜尋第 k 個出現的正規表示式 [1]\n"
-"n 搜尋第 k 個出現的倒數正規表示式 [1]\n"
-"!<cmd> 或 :!<cmd> 在 subshell 中執行 <cmd>\n"
-"v 在當前列上啟動 /usr/bin/vi\n"
-"ctrl-L 重繪螢幕\n"
-":n 前往後面第 k 個檔案 [1]\n"
-":p 前往前面第 k 個檔案 [1]\n"
-":f 顯示目前檔案名稱和列號\n"
-". 重複前一個命令\n"
+#, fuzzy
+#~ msgid "mount: failed to found free loop device"
+#~ msgstr "掛載：無法找到自由迴圈裝置"
-#: text-utils/more.c:1448 text-utils/more.c:1454
-#, c-format
-msgid "[Press 'h' for instructions.]"
-msgstr "[按下「h」列出指令。]"
+#~ msgid "mount: going to use the loop device %s\n"
+#~ msgstr "mount：即將使用環路裝置 %s\n"
-#: text-utils/more.c:1485
-#, c-format
-msgid "\"%s\" line %d"
-msgstr "「%s」第 %d 列"
+#, fuzzy
+#~ msgid "mount: %s: failed to set loopdev attributes"
+#~ msgstr "掛載：%s：無法設定 loopdev 屬性"
-#: text-utils/more.c:1487
-#, c-format
-msgid "[Not a file] line %d"
-msgstr "[非檔案] 第 %d 列"
+#, fuzzy
+#~ msgid "mount: %s: failed setting up loop device: %m"
+#~ msgstr "掛載：%s：失敗的設定迴圈裝置：%m"
-#: text-utils/more.c:1569
-msgid " Overflow\n"
-msgstr " 溢位\n"
+#~ msgid "mount: stolen loop=%s ...trying again\n"
+#~ msgstr "mount：丟失環路=%s …再試一次\n"
-#: text-utils/more.c:1616
-msgid "...skipping\n"
-msgstr "…跳過\n"
+#~ msgid "mount: stolen loop=%s"
+#~ msgstr "mount：丟失環路=%s"
-#: text-utils/more.c:1650
-msgid ""
-"\n"
-"Pattern not found\n"
-msgstr ""
-"\n"
-"找不到相符的式樣\n"
+#~ msgid "mount: setup loop device successfully\n"
+#~ msgstr "mount：成功設定環路裝置\n"
-#: text-utils/more.c:1655 text-utils/pg.c:1015 text-utils/pg.c:1161
-msgid "Pattern not found"
-msgstr "找不到相符的式樣"
+#~ msgid "mount: no %s found - creating it..\n"
+#~ msgstr "mount：找不到 %s - 建立它…\n"
-#: text-utils/more.c:1701
-msgid "exec failed\n"
-msgstr "執行時失敗\n"
+#~ msgid "mount: cannot open %s for setting speed"
+#~ msgstr "mount：無法開啟 %s 以用於設定速度"
-#: text-utils/more.c:1715
-msgid "can't fork\n"
-msgstr "無法衍生執行\n"
+#, fuzzy
+#~ msgid "mount: cannot set speed: %m"
+#~ msgstr "掛載：無法設定速度：%m"
-#: text-utils/more.c:1749
-msgid ""
-"\n"
-"...Skipping "
-msgstr ""
-"\n"
-"...跳過 "
+#~ msgid "mount: according to mtab, %s is already mounted on %s\n"
+#~ msgstr "mount：根據 mtab，%s 已經掛載到 %s\n"
-#: text-utils/more.c:1753
-msgid "...Skipping to file "
-msgstr "…跳到檔案 "
+#~ msgid "mount: warning: %s seems to be mounted read-write.\n"
+#~ msgstr "mount：警告：%s 似乎被掛載為可讀可寫。\n"
-#: text-utils/more.c:1755
-msgid "...Skipping back to file "
-msgstr "…跳回檔案 "
+#~ msgid "mount: warning: %s seems to be mounted read-only.\n"
+#~ msgstr "mount：警告：%s 似乎被掛載為唯讀。\n"
-#: text-utils/more.c:2040
-msgid "Line too long"
-msgstr "列太長"
+#~ msgid "mount: I could not determine the filesystem type, and none was specified"
+#~ msgstr "mount：我無法決定檔案系統類型，而它並未被指定"
-#: text-utils/more.c:2077
-msgid "No previous command to substitute for"
-msgstr "沒有前一個命令可用於替代"
+#~ msgid "mount: you must specify the filesystem type"
+#~ msgstr "mount：您必須指定檔案系統類型"
-#: text-utils/parse.c:67
-msgid "line too long"
-msgstr "列的長度過長"
+#~ msgid "mount: mount failed"
+#~ msgstr "mount：掛載時失敗"
-#: text-utils/parse.c:400
-#, fuzzy
-msgid "byte count with multiple conversion characters"
-msgstr "位元組計數與多重轉換字元"
+#~ msgid "mount: mount point %s is not a directory"
+#~ msgstr "mount：掛載點 %s 並非目錄"
-#: text-utils/parse.c:481
-#, fuzzy, c-format
-msgid "bad byte count for conversion character %s"
-msgstr "不當的位元組計數用於轉換字元 %s"
+#~ msgid "mount: permission denied"
+#~ msgstr "mount：權限被拒"
-#: text-utils/parse.c:486
-#, fuzzy, c-format
-msgid "%%s requires a precision or a byte count"
-msgstr "%%s 需要精確度或位元組計數"
+#~ msgid "mount: must be superuser to use mount"
+#~ msgstr "mount：必須是系統管理者才能使用掛載"
-#: text-utils/parse.c:491
-#, fuzzy, c-format
-msgid "bad format {%s}"
-msgstr "不當的格式 {%s}"
+#~ msgid "mount: proc already mounted"
+#~ msgstr "mount：proc 已被掛載"
-#: text-utils/parse.c:496
-#, fuzzy, c-format
-msgid "bad conversion character %%%s"
-msgstr "不當的轉換字元 %%%s"
+#~ msgid "mount: %s already mounted or %s busy"
+#~ msgstr "mount：%s 已被掛載或者 %s 忙碌中"
-#: text-utils/pg.c:136
-#, fuzzy
-msgid ""
-"-------------------------------------------------------\n"
-" h this screen\n"
-" q or Q quit program\n"
-" <newline> next page\n"
-" f skip a page forward\n"
-" d or ^D next halfpage\n"
-" l next line\n"
-" $ last page\n"
-" /regex/ search forward for regex\n"
-" ?regex? or ^regex^ search backward for regex\n"
-" . or ^L redraw screen\n"
-" w or z set page size and go to next page\n"
-" s filename save current file to filename\n"
-" !command shell escape\n"
-" p go to previous file\n"
-" n go to next file\n"
-"\n"
-"Many commands accept preceding numbers, for example:\n"
-"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first "
-"page).\n"
-"\n"
-"See pg(1) for more information.\n"
-"-------------------------------------------------------\n"
-msgstr ""
-"-------------------------------------------------------\n"
-" h 這個螢幕\n"
-" q 或 Q 離開程式\n"
-" <newline> 下一頁\n"
-" f 跳過頁面轉寄\n"
-" d 或 ^D 下一個 halfpage\n"
-" l 下一個列\n"
-" $ 最後一頁\n"
-" /regex/ 搜尋轉寄用於 regex\n"
-" ？regex？或 ^ regex ^ 向後搜尋用於 regex\n"
-" .或 ^L 重繪螢幕\n"
-" w 或 z 設定頁面大小並前往下一頁\n"
-" s 檔名 儲存目前的檔案到檔名\n"
-" ！命令 命令殼退出\n"
-" p 前往前一個檔案\n"
-" n 前往下一個檔案\n"
-"\n"
-"許多命令接受前繼數量，舉例來說：\n"
-"+1<新列字元>(下一頁)；-1< 新列字元>(上一頁)；1<新列字元>(第一頁)。\n"
-"\n"
-"參看 pg (1) 以獲得更多資訊。\n"
-"-------------------------------------------------------\n"
+#~ msgid "mount: mount point %s does not exist"
+#~ msgstr "mount：掛載點 %s 不存在"
-#: text-utils/pg.c:214
-#, fuzzy, c-format
-msgid " %s [options] [+line] [+/pattern/] [files]\n"
-msgstr " %s [選項] [+列] [+/胚騰/] [檔案]\n"
+#~ msgid "mount: mount point %s is a symbolic link to nowhere"
+#~ msgstr "mount：掛載點 %s 是不明位置的符號連結"
-#: text-utils/pg.c:217
-#, fuzzy
-msgid " -number lines per page\n"
-msgstr " -number 列各頁面\n"
+#~ msgid "mount: special device %s does not exist"
+#~ msgstr "mount：特殊裝置 %s 不存在"
+
+#~ msgid ""
+#~ "mount: special device %s does not exist\n"
+#~ " (a path prefix is not a directory)\n"
+#~ msgstr ""
+#~ "mount：特殊裝置 %s 不存在\n"
+#~ " (路徑前綴並非目錄)\n"
+
+#~ msgid ""
+#~ "mount: wrong fs type, bad option, bad superblock on %s,\n"
+#~ " missing codepage or helper program, or other error"
+#~ msgstr ""
+#~ "mount：錯誤檔案系統類型、不當的選項、不當的超區塊於 %s,\n"
+#~ " 缺少編碼頁或輔助程式，或其他錯誤"
-#: text-utils/pg.c:218
-#, fuzzy
-msgid " -c clear screen before displaying\n"
-msgstr " -c 清空螢幕之前顯示\n"
+#~ msgid ""
+#~ " (could this be the IDE device where you in fact use\n"
+#~ " ide-scsi so that sr0 or sda or so is needed?)"
+#~ msgstr ""
+#~ " (是否可能您使用 IDE 裝置其實是\n"
+#~ " ide-scsi 因而需要 sr0 或 sda 之類裝置?)"
-#: text-utils/pg.c:219
-#, fuzzy
-msgid " -e do not pause at end of a file\n"
-msgstr " -e 不暫停於結束的檔案\n"
+#~ msgid ""
+#~ " (aren't you trying to mount an extended partition,\n"
+#~ " instead of some logical partition inside?)"
+#~ msgstr ""
+#~ " (您是否試著掛載擴充分割區，\n"
+#~ " 而非其中的邏輯分割區 ?)"
-#: text-utils/pg.c:220
-#, fuzzy
-msgid " -f do not split long lines\n"
-msgstr " -f 不分割長列\n"
+#~ msgid ""
+#~ " In some cases useful info is found in syslog - try\n"
+#~ " dmesg | tail or so\n"
+#~ msgstr ""
+#~ " 在某些狀況下，syslog 中可以找到有用的資訊 - 嘗試\n"
+#~ " dmesg | tail 之類命令\n"
-#: text-utils/pg.c:221
-#, fuzzy
-msgid " -n terminate command with new line\n"
-msgstr " -n 終止命令與換列\n"
+#~ msgid "mount: %s: can't read superblock"
+#~ msgstr "mount：%s: 無法讀取超區塊"
-#: text-utils/pg.c:222
-#, fuzzy
-msgid " -p <prompt> specify prompt\n"
-msgstr " -p <prompt> 指定提示\n"
+#~ msgid "mount: %s: unknown device"
+#~ msgstr "mount：%s: 不明的裝置"
-#: text-utils/pg.c:223
-#, fuzzy
-msgid " -r disallow shell escape\n"
-msgstr " -r disallow 命令殼退出\n"
+#~ msgid "mount: unknown filesystem type '%s'"
+#~ msgstr "mount：不明的檔案系統類型「%s」"
-#: text-utils/pg.c:224
-#, fuzzy
-msgid " -s print messages to stdout\n"
-msgstr " -s 列印訊息到標準輸出\n"
+#~ msgid "mount: probably you meant %s"
+#~ msgstr "mount：您的意思大概是 %s"
-#: text-utils/pg.c:225
-#, fuzzy
-msgid " +number start at the given line\n"
-msgstr "+數字 開始於給定的列\n"
+#~ msgid "mount: maybe you meant 'iso9660'?"
+#~ msgstr "mount：也許您的意思是「iso9660」？"
-#: text-utils/pg.c:226
-#, fuzzy
-msgid " +/pattern/ start at the line containing pattern\n"
-msgstr "+/胚騰/ 開始於列包含胚騰\n"
+#~ msgid "mount: maybe you meant 'vfat'?"
+#~ msgstr "mount：也許您的意思是「vfat」？"
-#: text-utils/pg.c:238
-#, fuzzy, c-format
-msgid "option requires an argument -- %s"
-msgstr "%s：選項需要一個引數 -- %s\n"
+#~ msgid "mount: %s has wrong device number or fs type %s not supported"
+#~ msgstr "mount：%s 有錯誤的裝置編號，或是不支援檔案系統類型 %s"
-#: text-utils/pg.c:244
-#, fuzzy, c-format
-msgid "illegal option -- %s"
-msgstr "%s：不合法的選項 -- %s\n"
+#~ msgid "mount: %s is not a block device, and stat fails?"
+#~ msgstr "mount：%s 並非一個區塊裝置，而且取得狀態時失敗？"
-#: text-utils/pg.c:347
-msgid "...skipping forward\n"
-msgstr "…向前跳過\n"
+#~ msgid ""
+#~ "mount: the kernel does not recognize %s as a block device\n"
+#~ " (maybe `modprobe driver'?)"
+#~ msgstr ""
+#~ "mount：內核無法識別 %s 為一個區塊裝置\n"
+#~ " (也許要用「modprobe driver」?)"
-#: text-utils/pg.c:349
-msgid "...skipping backward\n"
-msgstr "…向後跳過\n"
+#~ msgid "mount: %s is not a block device (maybe try `-o loop'?)"
+#~ msgstr "mount：%s 並非一個區塊裝置 (也許試試「-o loop」?)"
-#: text-utils/pg.c:365
-msgid "No next file"
-msgstr "沒有下個檔案"
+#~ msgid "mount: %s is not a block device"
+#~ msgstr "mount：%s 並非一個區塊裝置"
-#: text-utils/pg.c:369
-msgid "No previous file"
-msgstr "沒有上個檔案"
+#~ msgid "mount: %s is not a valid block device"
+#~ msgstr "mount：%s 並非有效的區塊裝置"
-#: text-utils/pg.c:871
-#, fuzzy, c-format
-msgid "Read error from %s file"
-msgstr "%s：從 %s 檔案讀取時錯誤\n"
+#~ msgid "mount: cannot mount %s%s read-only"
+#~ msgstr "mount：無法以唯讀方式掛載 %s%s"
-#: text-utils/pg.c:874
-#, fuzzy, c-format
-msgid "Unexpected EOF in %s file"
-msgstr "%s：在 %s 檔案中出現未預期的檔案結束\n"
+#~ msgid "mount: %s%s is write-protected but explicit `-w' flag given"
+#~ msgstr "mount：%s%s 為防寫，但卻明確給定了「-w」旗標"
-#: text-utils/pg.c:876
-#, fuzzy, c-format
-msgid "Unknown error in %s file"
-msgstr "%s：%s 檔案中發生不明錯誤\n"
+#~ msgid "mount: cannot remount %s%s read-write, is write-protected"
+#~ msgstr "mount：無法重新將 %s%s 掛載成可讀可寫，其為防寫的"
-#: text-utils/pg.c:929
-#, fuzzy
-msgid "Cannot create tempfile"
-msgstr "%s：無法建立暫存檔\n"
+#~ msgid "mount: %s%s is write-protected, mounting read-only"
+#~ msgstr "mount：%s%s 為防寫，即將以唯讀方式掛載"
-#: text-utils/pg.c:938 text-utils/pg.c:1102 text-utils/pg.c:1128
-msgid "RE error: "
-msgstr "正規表示式錯誤："
+#~ msgid "mount: no medium found on %s"
+#~ msgstr "mount：%s 中找不到任何媒體"
-#: text-utils/pg.c:1085
-msgid "(EOF)"
-msgstr "(檔案結束)"
+#~ msgid "mount: no type was given - I'll assume nfs because of the colon\n"
+#~ msgstr "mount：沒有給定任何類型 - 我將因為冒號而假設是 nfs\n"
-#: text-utils/pg.c:1110 text-utils/pg.c:1136
-msgid "No remembered search string"
-msgstr "沒有被記住的搜尋字串"
+#~ msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
+#~ msgstr "mount：沒有給定任何類型 - 我將因為 // 前綴而假設是 cifs\n"
-#: text-utils/pg.c:1191
#, fuzzy
-msgid "cannot open "
-msgstr "無法開啟 "
+#~ msgid "mount: ignore %s (unparsable offset= option)\n"
+#~ msgstr "掛載：忽略 %s (unparsable 偏移=選項)\n"
-#: text-utils/pg.c:1243
-msgid "saved"
-msgstr "已儲存"
+#~ msgid ""
+#~ "Usage: mount -V : print version\n"
+#~ " mount -h : print this help\n"
+#~ " mount : list mounted filesystems\n"
+#~ " mount -l : idem, including volume labels\n"
+#~ "So far the informational part. Next the mounting.\n"
+#~ "The command is `mount [-t fstype] something somewhere'.\n"
+#~ "Details found in /etc/fstab may be omitted.\n"
+#~ " mount -a [-t|-O] ... : mount all stuff from /etc/fstab\n"
+#~ " mount device : mount device at the known place\n"
+#~ " mount directory : mount known device here\n"
+#~ " mount -t type dev dir : ordinary mount command\n"
+#~ "Note that one does not really mount a device, one mounts\n"
+#~ "a filesystem (of the given type) found on the device.\n"
+#~ "One can also mount an already visible directory tree elsewhere:\n"
+#~ " mount --bind olddir newdir\n"
+#~ "or move a subtree:\n"
+#~ " mount --move olddir newdir\n"
+#~ "One can change the type of mount containing the directory dir:\n"
+#~ " mount --make-shared dir\n"
+#~ " mount --make-slave dir\n"
+#~ " mount --make-private dir\n"
+#~ " mount --make-unbindable dir\n"
+#~ "One can change the type of all the mounts in a mount subtree\n"
+#~ "containing the directory dir:\n"
+#~ " mount --make-rshared dir\n"
+#~ " mount --make-rslave dir\n"
+#~ " mount --make-rprivate dir\n"
+#~ " mount --make-runbindable dir\n"
+#~ "A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
+#~ "or by label, using -L label or by uuid, using -U uuid .\n"
+#~ "Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
+#~ "For many more details, say man 8 mount .\n"
+#~ msgstr ""
+#~ "用法：mount -V ：印出版本\n"
+#~ " mount -h ：印出這個說明\n"
+#~ " mount ：列出掛載的檔案系統\n"
+#~ " mount -l ：idem，包含卷冊標籤\n"
+#~ "目前為止是有關資訊部分。下列有關掛載。\n"
+#~ "命令為「mount [-t fstype] something somewhere」。\n"
+#~ "在 /etc/fstab 中找到的細節也許會被省略。\n"
+#~ " mount -a [-t|-O]… ：依據 /etc/fstab 掛載所有項目\n"
+#~ " mount device ：於已知位置掛載裝置\n"
+#~ " mount directory ：在此掛載已知裝置\n"
+#~ " mount -t type dev dir ：標準的掛載命令\n"
+#~ "要注意的是，並非真正地掛載裝置，而是掛載一個\n"
+#~ "在裝置中找到的檔案系統 (給定的類型)。\n"
+#~ "已經可見的目錄樹也可以被掛載到其他地方：\n"
+#~ " mount --bind olddir newdir\n"
+#~ "或是移動子樹：\n"
+#~ " mount --move olddir newdir\n"
+#~ "也可以變更包含目錄 dir 的掛載類型：\n"
+#~ " mount --make-shared dir\n"
+#~ " mount --make-slave dir\n"
+#~ " mount --make-private dir\n"
+#~ " mount --make-unbindable dir\n"
+#~ "包含目錄 dir 的掛載子樹中所有掛載的類型\n"
+#~ "都可以變更：\n"
+#~ " mount --make-rshared dir\n"
+#~ " mount --make-rslave dir\n"
+#~ " mount --make-rprivate dir\n"
+#~ " mount --make-runbindable dir\n"
+#~ "裝置可以由名稱給定，例如 /dev/hda1 或 /dev/cdrom，\n"
+#~ "或是利用 -L label 經由標籤，或是利用 -U uuid 而經由 uuid。\n"
+#~ "其他選項：[-nfFrsvw] [-o options] [-p passwdfd]。\n"
+#~ "要獲得更多細節，就用 man 8 mount。\n"
+
+#~ msgid "mount: only root can do that (effective UID is %u)"
+#~ msgstr "mount：只有 root 可以那樣做 (有效 UID 是 %u)"
+
+#~ msgid "mount: only root can do that"
+#~ msgstr "mount：只有 root 可以那樣做"
+
+#~ msgid "nothing was mounted"
+#~ msgstr "沒有掛載任何東西"
+
+#~ msgid "mount: no such partition found"
+#~ msgstr "mount：找不到此類分割"
+
+#~ msgid "mount: can't find %s in %s or %s"
+#~ msgstr "mount：無法在 %2$s 或 %3$s 中找到 %1$s"
+
+#~ msgid "[mntent]: warning: no final newline at the end of %s\n"
+#~ msgstr "[mntent]：警告：在 %s 的結尾沒有最後的換列字元\n"
+
+#~ msgid "[mntent]: line %d in %s is bad%s\n"
+#~ msgstr "[mntent]：在 %2$s 中的第 %1$d 列是不當的 %3$s\n"
+
+#~ msgid "; rest of file ignored"
+#~ msgstr "；忽略檔案的其餘部分"
+
+#~ msgid "not enough memory"
+#~ msgstr "記憶體不足"
-#: text-utils/pg.c:1333
-msgid ": !command not allowed in rflag mode.\n"
-msgstr "：!命令在 rflag 模式不允許。\n"
+#~ msgid "umount: compiled without support for -f\n"
+#~ msgstr "umount：編譯時未支援 -f\n"
-#: text-utils/pg.c:1368
-msgid "fork() failed, try again later\n"
-msgstr "fork() 失敗，稍後再試\n"
+#, fuzzy
+#~ msgid "umount: cannot set group id: %m"
+#~ msgstr "umount：無法設定群組識別號：%m"
-#: text-utils/pg.c:1456
-msgid "(Next file: "
-msgstr "(下個檔案："
+#, fuzzy
+#~ msgid "umount: cannot set user id: %m"
+#~ msgstr "umount：無法設定使用者識別號：%m"
-#: text-utils/pg.c:1522
-#, fuzzy, c-format
-msgid "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"
-msgstr "%s %s 著作權©2000-2001 Gunnar Ritter。版權所有。\n"
+#~ msgid "umount: cannot fork: %s"
+#~ msgstr "umount：無法衍生執行：%s"
-#: text-utils/pg.c:1575 text-utils/pg.c:1648
-#, fuzzy
-msgid "failed to parse number of lines per page"
-msgstr "剖析列號的時失敗"
+#~ msgid "umount: %s: invalid block device"
+#~ msgstr "umount：%s: 無效的區塊裝置"
-#: text-utils/rev.c:77
-#, fuzzy, c-format
-msgid "Usage: %s [options] [file ...]\n"
-msgstr "用法：%s [選項] [檔案...]\n"
+#~ msgid "umount: %s: not mounted"
+#~ msgstr "umount：%s: 未掛載"
-#: text-utils/rev.c:80
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
+#~ msgid "umount: %s: can't write superblock"
+#~ msgstr "umount：%s: 無法寫入超區塊"
-#: text-utils/rev.c:84
-#, fuzzy, c-format
-msgid ""
-"\n"
-"For more information see rev(1).\n"
-msgstr ""
-"\n"
-"要獲得更多資訊請參看 rev (1)。\n"
+#~ msgid ""
+#~ "umount: %s: device is busy.\n"
+#~ " (In some cases useful info about processes that use\n"
+#~ " the device is found by lsof(8) or fuser(1))"
+#~ msgstr ""
+#~ "umount：%s：裝置忙碌中。\n"
+#~ " (在某些情況下關於使用該裝置之行程的\n"
+#~ " 有用資訊，可以藉由 lsof(8) 或 fuser(1) 找到)"
-#: text-utils/tailf.c:114
-#, c-format
-msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
-msgstr "寫入「%s」不完整 (已寫入 %zd，預期則為 %zd)\n"
+#~ msgid "umount: %s: not found"
+#~ msgstr "umount：%s: 找不到"
-#: text-utils/tailf.c:160
-#, c-format
-msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
-msgstr "%s：無法加入 inotify 監看 (已達到 inotify 的監看限制)。"
+#~ msgid "umount: %s: must be superuser to umount"
+#~ msgstr "umount：%s: 必須是系統管理者才能 umount"
-#: text-utils/tailf.c:197
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Usage:\n"
-" %s [option] file\n"
-msgstr ""
-"\n"
-"用法：\n"
-" %s [選項] 檔案\n"
+#~ msgid "umount: %s: block devices not permitted on fs"
+#~ msgstr "umount：%s: 區塊裝置在檔案系統中不被允許"
-#: text-utils/tailf.c:202
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Options:\n"
-" -n, --lines NUMBER output the last NUMBER lines\n"
-" -NUMBER same as `-n NUMBER'\n"
-" -V, --version output version information and exit\n"
-" -h, --help display this help and exit\n"
-"\n"
-msgstr ""
-"\n"
-"選項：\n"
-" -n, --lines 數字 輸出最後一筆數字列\n"
-" -NUMBER 如同『-n 數字』\n"
-" -V, --version 輸出版本資訊然後離開\n"
-" -h, --help 顯示這份說明然後離開\n"
-"\n"
+#~ msgid "umount: %s: %s"
+#~ msgstr "umount：%s: %s"
-#: text-utils/tailf.c:220 text-utils/tailf.c:261
#, fuzzy
-msgid "failed to parse number of lines"
-msgstr "剖析列號的時失敗"
+#~ msgid "umount: internal error: invalid abs path: %s"
+#~ msgstr "umount：內部錯誤：無效的 abs 路徑：%s"
-#: text-utils/tailf.c:274
#, fuzzy
-msgid "no input file specified"
-msgstr "沒有輸入檔案指定的"
-
-#: text-utils/ul.c:136
-#, fuzzy, c-format
-msgid " %s [options] [<file> ...]\n"
-msgstr " %s [選項] [<file>]\n"
-
-#: text-utils/ul.c:139
-msgid " -t, -T, --terminal TERMINAL override the TERM environment variable\n"
-msgstr ""
+#~ msgid "umount: failed to chdir to %s: %m"
+#~ msgstr "umount：無法 chdir 到 %s：%m"
-#: text-utils/ul.c:140
-msgid ""
-" -i, --indicated underlining is indicated via a separate line\n"
-msgstr ""
+#, fuzzy
+#~ msgid "umount: failed to obtain current directory: %m"
+#~ msgstr "umount：無法得到目前的目錄：%m"
-#: text-utils/ul.c:211
-msgid "trouble reading terminfo"
-msgstr "讀取 terminfo 時出現問題"
+#, fuzzy
+#~ msgid "umount: mountpoint moved (%s -> %s)"
+#~ msgstr "umount：mountpoint 移動 (%s -> %s)"
-#: text-utils/ul.c:216
-#, fuzzy, c-format
-msgid "terminal `%s' is not known, defaulting to `dumb'"
-msgstr "終端機『%s』不是已知，預設到『dumb』"
+#, fuzzy
+#~ msgid "current directory moved to %s\n"
+#~ msgstr "目前的目錄移動到 %s\n"
-#: text-utils/ul.c:312
-#, fuzzy, c-format
-msgid "unknown escape sequence in input: %o, %o"
-msgstr "不明的退出序列在中輸入：%o，%o"
+#~ msgid "no umount2, trying umount...\n"
+#~ msgstr "沒有 umount2, 試試 umount…\n"
-#: text-utils/ul.c:647
-#, fuzzy
-msgid "Input line too long."
-msgstr "輸入列太長。"
+#~ msgid "umount: %s busy - remounted read-only\n"
+#~ msgstr "umount：%s 忙碌中 - 已重新以唯讀掛載\n"
-#~ msgid "usage:\n"
-#~ msgstr "用法：\n"
+#~ msgid "umount: could not remount %s read-only\n"
+#~ msgstr "umount：無法以唯讀重新掛載 %s\n"
-#~ msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
-#~ msgstr "\t註記：elvtune 只適用於 2.4 內核\n"
+#~ msgid "%s has been unmounted\n"
+#~ msgstr "%s 已卸載\n"
-#~ msgid "missing blockdevice, use -h for help\n"
-#~ msgstr "缺少區塊裝置，使用 -h 以獲得說明\n"
+#~ msgid "umount: cannot find list of filesystems to unmount"
+#~ msgstr "umount：找不到可卸載檔案系統的列表"
#~ msgid ""
-#~ "\n"
-#~ "elvtune is only useful on older kernels;\n"
-#~ "for 2.6 use IO scheduler sysfs tunables instead..\n"
+#~ "Usage: umount -h | -V\n"
+#~ " umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
+#~ " umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
#~ msgstr ""
-#~ "\n"
-#~ " elvtune 只適用於舊的內核；\n"
-#~ "於 2.6 請使用 IO 排程程式 sysfs tunables 做為替代。\n"
+#~ "用法：umount -h | -V\n"
+#~ " umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
+#~ " umount [-d] [-f] [-r] [-n] [-v] 特殊 | 節點…\n"
#, fuzzy
-#~ msgid "edition number argument failed"
-#~ msgstr "編輯數字引數失敗"
+#~ msgid "failed to parse 'offset=%s' options\n"
+#~ msgstr "剖析『偏移時失敗=%s』選項\n"
-#~ msgid "fsync failed"
-#~ msgstr "fsync 失敗"
+#~ msgid "device %s is associated with %s\n"
+#~ msgstr "裝置 %s 與 %s 有所關聯\n"
-#~ msgid ""
-#~ "\n"
-#~ "Usage:\n"
-#~ "Print version:\n"
-#~ " %s -v\n"
-#~ "Print partition table:\n"
-#~ " %s -P {r|s|t} [options] device\n"
-#~ "Interactive use:\n"
-#~ " %s [options] device\n"
-#~ "\n"
-#~ "Options:\n"
-#~ "-a: Use arrow instead of highlighting;\n"
-#~ "-z: Start with a zero partition table, instead of reading the pt from "
-#~ "disk;\n"
-#~ "-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
-#~ " the number of heads and the number of sectors/track.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "用法：\n"
-#~ "印出版本：\n"
-#~ " %s -v\n"
-#~ "印出分割表：\n"
-#~ " %s -P {r|s|t} [選項] 裝置\n"
-#~ "互動式使用：\n"
-#~ " %s [選項] 裝置\n"
-#~ "\n"
-#~ "選項：\n"
-#~ "-a: 使用箭頭以代替高亮度顯示；\n"
-#~ "-z: 以零分割表開始，以代替從磁碟讀取分割表；\n"
-#~ "-c C -h H -s S:強制變更內核認為的磁柱數量、\n"
-#~ " 磁頭數量和每一磁軌的磁區數量。\n"
-#~ "\n"
+#~ msgid "Cannot unmount \"\"\n"
+#~ msgstr "無法卸載「」\n"
-#~ msgid "Writing disklabel to %s.\n"
-#~ msgstr "將磁碟標籤寫入 %s。\n"
+#~ msgid "umount: confused when analyzing mtab"
+#~ msgstr "umount：分析 mtab 時感到困惑"
-#~ msgid "Last %s or +size or +sizeM or +sizeK"
-#~ msgstr "最後 %s 或 +size 或 +sizeM 或 +sizeK"
+#~ msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
+#~ msgstr "umount：無法卸載 %s -- %s 被掛載於相同點之上"
-#~ msgid "Reading disklabel of %s at sector %d.\n"
-#~ msgstr "於磁區 %2$d 讀取 %1$s 的磁碟標籤。\n"
+#~ msgid "Could not find %s in mtab\n"
+#~ msgstr "在 mtab 中找不到 %s\n"
-#~ msgid "BSD disklabel command (m for help): "
-#~ msgstr "BSD 磁碟標籤命令 (m 以獲得說明)："
+#, fuzzy
+#~ msgid "umount: warning: %s is associated with more than one loop device\n"
+#~ msgstr "umount：警告：%s 被關聯的與超過一個迴圈裝置\n"
-#~ msgid "drivedata: "
-#~ msgstr "磁碟資料："
+#~ msgid "umount: %s is not mounted (according to mtab)"
+#~ msgstr "umount：%s 未掛載 (根據 mtab)"
-#~ msgid "# start end size fstype [fsize bsize cpg]\n"
-#~ msgstr ""
-#~ "# 開始 結束 大小 檔案系統類型 [fsize bsize cpg]\n"
+#~ msgid "umount: it seems %s is mounted multiple times"
+#~ msgstr "umount：%s 似乎已被多次掛載"
-#~ msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
-#~ msgstr "必須 <= 磁區/磁軌 * 磁軌/磁柱 (預設)。\n"
+#~ msgid "umount: %s is not in the fstab (and you are not root)"
+#~ msgstr "umount：%s 並不在 fstab 之中(而且您不是 root)"
-#~ msgid "Partition (a-%c): "
-#~ msgstr "分割區 (a-%c)："
+#~ msgid "umount: %s mount disagrees with the fstab"
+#~ msgstr "umount：%s 掛載與 fstab 不相符"
-#~ msgid "This partition already exists.\n"
-#~ msgstr "這個分割區已經存在。\n"
+#~ msgid "umount: only %s can unmount %s from %s"
+#~ msgstr "umount：只有 %1$s 可以從 %3$s 卸載 %2$s"
-#~ msgid "Warning: too many partitions (%d, maximum is %d).\n"
-#~ msgstr "警告：太多分割區 (%d, 最大值為 %d)。\n"
+#~ msgid "umount: only root can do that"
+#~ msgstr "umount：只有 root 可以那樣做"
+#, fuzzy
#~ msgid ""
#~ "\n"
-#~ "Syncing disks.\n"
-#~ msgstr ""
+#~ "%1$s - sets or gets process io scheduling class and priority.\n"
#~ "\n"
-#~ "同步磁碟。\n"
-
-#, fuzzy
-#~ msgid ""
#~ "Usage:\n"
-#~ " %1$s [options] <disk> change partition table\n"
-#~ " %1$s [options] -l <disk> list partition table(s)\n"
-#~ " %1$s -s <partition> give partition size(s) in blocks\n"
+#~ " %1$s [OPTION] -p PID [PID...]\n"
+#~ " %1$s [OPTION] COMMAND\n"
#~ "\n"
#~ "Options:\n"
-#~ " -b <size> sector size (512, 1024, 2048 or 4096)\n"
-#~ " -c[=<mode>] compatible mode: 'dos' or 'nondos' (default)\n"
-#~ " -h print this help text\n"
-#~ " -u[=<unit>] display units: 'cylinders' or 'sectors' (default)\n"
-#~ " -v print program version\n"
-#~ " -C <number> specify the number of cylinders\n"
-#~ " -H <number> specify the number of heads\n"
-#~ " -S <number> specify the number of sectors per track\n"
+#~ " -c, --class <class> scheduling class name or number\n"
+#~ " 0: none, 1: realtime, 2: best-effort, 3: idle\n"
+#~ " -n, --classdata <num> scheduling class data\n"
+#~ " 0-7 for realtime and best-effort classes\n"
+#~ " -p, --pid=PID view or modify already running process\n"
+#~ " -t, --ignore ignore failures\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
#~ "\n"
#~ msgstr ""
+#~ "\n"
+#~ "%1$s - 集合或提取處理 io 排程類別和優先權。\n"
+#~ "\n"
#~ "用法：\n"
-#~ " %1$s [選項] <disk> 變更分割表\n"
-#~ " %1$s [選項] -l<磁碟>清單分割表\n"
-#~ " %1$s -s<分割> 給出分割區大小在中區塊\n"
+#~ " %1$s [選項] -p PID [PID...]\n"
+#~ " %1$s [選項] 命令\n"
#~ "\n"
#~ "選項：\n"
-#~ " -b<大小> 磁區大小 (512,- 1024, 2048 或 4096)\n"
-#~ " -c[=< 模式>] 相容模式：'dos' 或 'nondos' (預設)\n"
-#~ " -h 印出這份說明文字\n"
-#~ " -u[=< 單位>] 顯示單位：'cylinders' 或 'sectors' (預設)\n"
-#~ " -v 列印程式版本\n"
-#~ " -C<數字> 指定磁柱數量\n"
-#~ " -H<數字> 指定前端數量\n"
-#~ " -S<數字> 指定磁區數量各軌段\n"
+#~ " -c, --class <class> 排程類別名稱或數字\n"
+#~ " 0:無，1:realtime，2:盡力，3:閒置\n"
+#~ " -n, --classdata<num>排程類別資料\n"
+#~ " 0-7 用於 realtime 和盡力類別\n"
+#~ " -p, --pid=PID 檢視或修改已經執行中處理\n"
+#~ " -t, --ignore 忽略失敗\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#~ msgid ""
#~ "\n"
+#~ "For more information see taskset(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 taskset(1)。\n"
+
+#, fuzzy
+#~ msgid " %s [options] <tty> [...]\n"
+#~ msgstr " %s [選項] <tty> [...]\n"
+
+#, fuzzy
+#~ msgid " -s, --set-threshold <num> set interruption threshold value\n"
+#~ msgstr " -s, --set-threshold <num> 設定插斷臨界值\n"
+
+#, fuzzy
+#~ msgid " -S, --set-default-threshold <num> set default threshold value\n"
+#~ msgstr " -S, --set-default-threshold <num> 設定預設臨界值\n"
#, fuzzy
-#~ msgid "unable to read %s"
-#~ msgstr "無法讀取 %s"
+#~ msgid " -t, --set-flush <num> set flush timeout to value\n"
+#~ msgstr " -t, --set-flush <num> 設定清理逾時到值\n"
#, fuzzy
-#~ msgid "unable to seek on %s"
-#~ msgstr "無法尋指於 %s"
+#~ msgid " -T, --set-default-flush <num> set the default flush timeout to value\n"
+#~ msgstr " -T, --set-default-flush <num> 設定預設清理逾時到值\n"
#, fuzzy
-#~ msgid "unable to write %s"
-#~ msgstr "無法寫入 %s"
+#~ msgid " -i, --interval <seconds> gather statistics every <seconds> interval\n"
+#~ msgstr " -i, --interval <seconds> 積聚統計每<秒>間隔\n"
#, fuzzy
-#~ msgid "fatal error"
-#~ msgstr "嚴重錯誤"
+#~ msgid ""
+#~ "File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
+#~ "and the maximum transfer rate in characters/second was %f"
+#~ msgstr ""
+#~ "檔案 %s，用於臨界值 %lu，最大值字元在中 fifo 是 %d，\n"
+#~ "和最大值轉送速率在中字元/秒是 %f"
-#~ msgid "Command action"
-#~ msgstr "命令動作"
+#, fuzzy
+#~ msgid ""
+#~ "File %s, For threshold value %lu and timeout value %lu, Maximum characters in fifo were %d,\n"
+#~ "and the maximum transfer rate in characters/second was %f"
+#~ msgstr ""
+#~ "檔案 %s，用於臨界值 %lu 和逾時值 %lu，最大值字元在中 fifo 是 %d，\n"
+#~ "和最大值轉送速率在中字元/秒是 %f"
-#~ msgid "You must set"
-#~ msgstr "您必須設定"
+#, fuzzy
+#~ msgid "cannot issue CYGETMON on %s"
+#~ msgstr "無法議題 CYGETMON 於 %s"
-#~ msgid "heads"
-#~ msgstr "磁頭"
+#, fuzzy
+#~ msgid "cannot get timeout for %s"
+#~ msgstr "無法提取逾時用於 %s"
-#~ msgid " and "
-#~ msgstr " 和 "
+#~ msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#~ msgstr "%s：%lu 間隔值，%lu/%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大值，%lu 當前值\n"
-#~ msgid "Unsupported suffix: '%s'.\n"
-#~ msgstr "不受支援的字尾：「%s」。\n"
+#~ msgid " %f int/sec; %f rec, %f send (char/sec)\n"
+#~ msgstr " %f 間隔/秒；%f 記錄，%f 發送 (字元/秒)\n"
-#~ msgid ""
-#~ "Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
-#~ " 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
-#~ msgstr ""
-#~ "支援的單位: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
-#~ " 2^N: K (KibiByte), M (MebiByte), G (GibiByte)\n"
+#~ msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
+#~ msgstr "%s：%lu 間隔值，%lu 字元值；fifo：%lu 臨界值，%lu 逾時值，%lu 最大值，%lu 當前值\n"
-#~ msgid "Using default value %u\n"
-#~ msgstr "使用預設值 %u\n"
+#~ msgid " %f int/sec; %f rec (char/sec)\n"
+#~ msgstr " %f 間隔/秒；%f 記錄 (字元/秒)\n"
#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "Disk %s: %ld MB, %lld bytes"
-#~ msgstr ""
-#~ "\n"
-#~ "磁碟 %s：%ld MB，%lld 位元組"
+#~ msgid "Invalid interval value"
+#~ msgstr "無效的間隔值"
#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "Disk %s: %ld.%ld GB, %llu bytes"
-#~ msgstr ""
-#~ "\n"
-#~ "磁碟 %s：%ld.%ld GB，%llu 位元組"
+#~ msgid "Invalid interval value: %d"
+#~ msgstr "無效的間隔值：%d"
#, fuzzy
-#~ msgid ", %llu sectors\n"
-#~ msgstr "，%llu 磁區\n"
+#~ msgid "Invalid set value: %d"
+#~ msgstr "無效的設定值：%d"
#, fuzzy
-#~ msgid "cannot write disk label"
-#~ msgstr "無法寫入磁碟標貼"
-
-#~ msgid ""
-#~ "\n"
-#~ "Error closing file\n"
-#~ msgstr ""
-#~ "\n"
-#~ "關閉檔案發生錯誤\n"
+#~ msgid "Invalid default value"
+#~ msgstr "無效的預設值"
#, fuzzy
-#~ msgid "Warning: setting sector offset for DOS compatibility\n"
-#~ msgstr "警告：設定磁區偏移用於 DOS 相容性\n"
+#~ msgid "Invalid default value: %d"
+#~ msgstr "無效的預設值：%d"
-#~ msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
-#~ msgstr "於 %s 偵測到 OSF/1 磁碟標籤，進入磁碟標籤模式。\n"
+#, fuzzy
+#~ msgid "Invalid set time value"
+#~ msgstr "無效的設定時間值"
-#~ msgid ""
-#~ "\n"
-#~ "WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
-#~ " switch off the mode (with command 'c')."
-#~ msgstr ""
-#~ "\n"
-#~ "警告：不宜再使用 DOS 相容模式。強烈建議\n"
-#~ " 關掉此模式 (利用命令「c」)。"
+#, fuzzy
+#~ msgid "Invalid set time value: %d"
+#~ msgstr "無效的設定時間值：%d"
-#~ msgid ""
-#~ "\n"
-#~ "WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
-#~ " change units to sectors.\n"
-#~ msgstr ""
-#~ "\n"
-#~ "警告：不宜再用磁柱做為顯示單位。使用命令「u」以\n"
-#~ " 變更單位為磁區。\n"
+#, fuzzy
+#~ msgid "Invalid default time value"
+#~ msgstr "無效的預設時間值"
#, fuzzy
-#~ msgid "Building a new DOS disklabel with disk identifier 0x%08x.\n"
-#~ msgstr "建立新的 DOS disklabel 與磁碟識別碼 0x%08x。\n"
+#~ msgid "Invalid default time value: %d"
+#~ msgstr "無效的預設時間值：%d"
-#~ msgid "New disk identifier (current 0x%08x): "
-#~ msgstr "新磁碟識別碼 (目前為 0x%08x)："
+#, fuzzy
+#~ msgid "cannot set %s to threshold %d"
+#~ msgstr "無法設定 %s 到臨界值 %d"
-#~ msgid "No free sectors available\n"
-#~ msgstr "沒有可用的磁區存在\n"
+#, fuzzy
+#~ msgid "cannot set %s to time threshold %d"
+#~ msgstr "無法設定 %s 到時間臨界值 %d"
-#~ msgid "Last %1$s, +%2$s or +size{K,M,G}"
-#~ msgstr "最後 %1$s, +%2$s 或 +大小{K,M,G}"
+#~ msgid "%s: %ld current threshold and %ld current timeout\n"
+#~ msgstr "%s：%ld 為目前臨界值以及 %ld 為目前逾時值\n"
-#~ msgid " phys=(%d, %d, %d) "
-#~ msgstr " 實體=(%d, %d, %d) "
+#~ msgid "%s: %ld default threshold and %ld default timeout\n"
+#~ msgstr "%s：%ld 為預設臨界值以及 %ld 為預設逾時值\n"
-#~ msgid "logical=(%d, %d, %d)\n"
-#~ msgstr "邏輯=(%d, %d, %d)\n"
+#, fuzzy
+#~ msgid "--notime can't be used together with --ctime or --reltime"
+#~ msgstr "--notime 無法使用的一起與 --ctime 或 --reltime"
#, fuzzy
-#~ msgid "Warning: bad start-of-data in partition %zd\n"
-#~ msgstr "警告：在分割區 %d 中不當的資料起始\n"
+#~ msgid "%s: is removable device"
+#~ msgstr "%s：是可移除的裝置"
-#~ msgid "Adding a primary partition\n"
-#~ msgstr "加入一個主要分割區\n"
+#, fuzzy
+#~ msgid "%s: connected by hotplug subsystem: %s"
+#~ msgstr "%s：連線由 hotplug 子系統：%s"
#, fuzzy
#~ msgid ""
-#~ "\n"
-#~ "WARNING: If you have created or modified any DOS 6.xpartitions, please "
-#~ "see the fdisk manual page for additionalinformation.\n"
-#~ "\n"
+#~ " -n, --keep-size don't modify the length of the file\n"
+#~ " -p, --punch-hole punch holes in the file\n"
+#~ " -o, --offset <num> offset of the allocation, in bytes\n"
+#~ " -l, --length <num> length of the allocation, in bytes\n"
#~ msgstr ""
-#~ "\n"
-#~ "警告：如果您已建立或修改任何 DOS 6.x\n"
-#~ "分割區，請參看 fdisk 線上手冊以獲得額外\n"
-#~ "資訊。\n"
+#~ " -n, --keep-size 不修改長度的檔案\n"
+#~ " -p, --punch-hole 打孔漏洞在中檔案\n"
+#~ " -o, --offset <num> 偏移的配額，在中位元組\n"
+#~ " -l, --length<num> 長度的配額，在中位元組\n"
-#~ msgid "%*s Boot Start End Blocks Id System\n"
-#~ msgstr "%*s 開機 開始 結束 區塊 識別號 系統\n"
+#, fuzzy
+#~ msgid "timeout cannot be zero"
+#~ msgstr "逾時無法零"
#, fuzzy
#~ msgid ""
-#~ "\n"
-#~ "Disk %s: %d heads, %llu sectors, %llu cylinders\n"
-#~ "\n"
+#~ " -o, --offset <num> offset in bytes to discard from\n"
+#~ " -l, --length <num> length of bytes to discard from the offset\n"
+#~ " -m, --minimum <num> minimum extent length to discard\n"
+#~ " -v, --verbose print number of discarded bytes\n"
#~ msgstr ""
-#~ "\n"
-#~ "磁碟 %s：%d 前端，%llu 磁區，%llu 磁柱\n"
-#~ "\n"
-
-#~ msgid "Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID\n"
-#~ msgstr "Nr AF 磁頭 磁區 磁柱 磁頭 磁區 磁柱 開始 大小 ID\n"
+#~ " -o, --offset <num> 偏移在中位元組到捨棄從\n"
+#~ " -l, --length<num> 長度的位元組到捨棄從偏移\n"
+#~ " -m, --minimum<num>最小延伸長度到捨棄\n"
+#~ " -v, --verbose 列印捨棄的位元組數量\n"
#~ msgid ""
-#~ "\n"
-#~ "\tThere is a valid Mac label on this disk.\n"
-#~ "\tUnfortunately fdisk(1) cannot handle these disks.\n"
-#~ "\tUse either pdisk or parted to modify the partition table.\n"
-#~ "\tNevertheless some advice:\n"
-#~ "\t1. fdisk will destroy its contents on write.\n"
-#~ "\t2. Be sure that this disk is NOT a still vital\n"
-#~ "\t part of a volume group. (Otherwise you may\n"
-#~ "\t erase the other disks as well, if unmirrored.)\n"
+#~ "Time elapsed since reference time has been %.6f seconds.\n"
+#~ "Delaying further to reach the new time.\n"
#~ msgstr ""
-#~ "\n"
-#~ "\t有效的 Mac 標籤位於這個磁碟。\n"
-#~ "\t不幸地 fdisk(1) 無法處理這些磁碟。\n"
-#~ "\t必須使用 pdisk 或 parted 以修改分割表。\n"
-#~ "\t不論如何還是有些建言：\n"
-#~ "\t1.fdisk 將於寫入時銷毀它的內容。\n"
-#~ "\t2.確認這個磁碟並非仍是\n"
-#~ "\t 卷冊群的現用部分。(否則如果沒有鏡像備份的話，\n"
-#~ "\t 您也許同樣會清除其他磁碟。)\n"
+#~ "從參考時間起算已經過 %.6f 秒。\n"
+#~ "多延遲一點以達到新的時間。\n"
+
+#~ msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
+#~ msgstr "需要插入 %d 秒並回溯參考 %.6f 秒之前的時間\n"
+
+#~ msgid "Waiting in loop for time from KDGHWCLK to change\n"
+#~ msgstr "循環等待自 KDGHWCLK 變更起的時間\n"
+
+#~ msgid "KDGHWCLK ioctl to read time failed"
+#~ msgstr "KDGHWCLK ioctl 讀取時間失敗"
+
+#~ msgid "KDGHWCLK ioctl to read time failed in loop"
+#~ msgstr "KDGHWCLK ioctl 讀取時間於循環中失敗"
+
+#~ msgid "ioctl() failed to read time from %s"
+#~ msgstr "ioctl() 從 %s 讀取時間失敗"
+#~ msgid "ioctl KDSHWCLK failed"
+#~ msgstr "ioctl KDSHWCLK 失敗"
+
+#~ msgid "Can't open /dev/tty1 or /dev/vc/1"
+#~ msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
+
+#~ msgid "KDGHWCLK ioctl failed"
+#~ msgstr "KDGHWCLK ioctl 失敗"
+
+#, fuzzy
#~ msgid ""
-#~ "\tSorry - this fdisk cannot handle Mac disk labels.\n"
-#~ "\tIf you want to add DOS-type partitions, create\n"
-#~ "\ta new empty DOS partition table first. (Use o.)\n"
-#~ "\tWARNING: This will destroy the present disk contents.\n"
+#~ " -a, --all list all used devices\n"
+#~ " -d, --detach <loopdev> [...] detach one or more devices\n"
+#~ " -D, --detach-all detach all used devices\n"
+#~ " -f, --find find first unused device\n"
+#~ " -c, --set-capacity <loopdev> resize device\n"
+#~ " -j, --associated <file> list all devices associated with <file>\n"
#~ msgstr ""
-#~ "\t抱歉 - fdisk 無法處理 Mac 磁碟標籤。\n"
-#~ "\t如果您要加入 DOS 類型分割區，請先建立\n"
-#~ "\t新的空 DOS 分割表。(使用 o.)\n"
-#~ "\t警告：這將銷毀現有磁碟內容。\n"
+#~ " -a, --all 列出所有使用的裝置\n"
+#~ " -d, --detach <loopdev> [...] 卸離一或多個裝置\n"
+#~ " -D, --detach-all 卸離所有使用的裝置\n"
+#~ " -f, --find 尋找先未使用的裝置\n"
+#~ " -c, --set-capacity<loopdev> 調整大小裝置\n"
+#~ " -j, --associated<檔案> 列出所有裝置關聯的與<檔案>\n"
-#~ msgid ""
-#~ "According to MIPS Computer Systems, Inc the Label must not contain more "
-#~ "than 512 bytes\n"
-#~ msgstr "根據 MIPS 電腦系統公司，標籤必須包含不超過 512 位元組\n"
+#, fuzzy
+#~ msgid "find unused loop device failed"
+#~ msgstr "尋找未使用的迴圈裝置失敗"
#, fuzzy
#~ msgid ""
#~ "\n"
-#~ "Disk %s (SGI disk label): %d heads, %llu sectors, %llu cylinders\n"
-#~ "Units = %s of %d * %ld bytes\n"
-#~ "\n"
+#~ "For more details see lscpu(1).\n"
#~ msgstr ""
#~ "\n"
-#~ "磁碟 %s (SGI 磁碟標貼)：%d 前端，%llu 磁區，%llu 磁柱\n"
-#~ "單位=%s 的 %d * %ld 位元組\n"
-#~ "\n"
+#~ "以獲得更多細節參看 lscpu (1)。\n"
+
+#, fuzzy
+#~ msgid " %s [options] <program> [args...]\n"
+#~ msgstr " %s [選項] <program> [引數...]\n"
+#, fuzzy
#~ msgid ""
-#~ "----- partitions -----\n"
-#~ "Pt# %*s Info Start End Sectors Id System\n"
+#~ " -g, --pgrp <id> interpret argument as process group ID\n"
+#~ " -n, --priority <num> specify the nice increment value\n"
+#~ " -p, --pid <id> interpret argument as process ID (default)\n"
+#~ " -u, --user <name|id> interpret argument as username or user ID\n"
+#~ " -h, --help display help text and exit\n"
+#~ " -V, --version display version information and exit\n"
#~ msgstr ""
-#~ "----- 分割區 -----\n"
-#~ "Pt# %*s 資訊 開始 結束 磁區 識別號 系統\n"
+#~ " -g, --pgrp <id> 解譯做為處理群組識別號\n"
+#~ " -h, --help 列印說明\n"
+#~ " -n, --priority<num> 設定好遞增值\n"
+#~ " -p, --pid<識別號> 強制為解譯的做為處理識別號\n"
+#~ " -u, --user<名稱|識別號> 解譯做為使用者名稱或使用者識別號\n"
+#~ " -v, --version 印出版本\n"
+#, fuzzy
#~ msgid ""
-#~ "----- Bootinfo -----\n"
-#~ "Bootfile: %s\n"
-#~ "----- Directory Entries -----\n"
+#~ "\n"
+#~ "For more information see renice(1).\n"
#~ msgstr ""
-#~ "----- 開機資訊 -----\n"
-#~ "開機檔案：%s\n"
-#~ "----- 目錄項目 -----\n"
+#~ "\n"
+#~ "要獲得更多資訊請參看 renice (1)。\n"
#, fuzzy
-#~ msgid "%2zd: %-10s sector%5u size%8u\n"
-#~ msgstr "%2d: %-10s 磁區%5u 大小%8u\n"
-
-#~ msgid "No partitions defined\n"
-#~ msgstr "無已定義分割區\n"
+#~ msgid " %s%s [options] [program [program arguments]]\n"
+#~ msgstr " %s%s [選項] [程式 [程式引數]]\n"
+#, fuzzy
#~ msgid ""
-#~ "The entire disk partition is only %d diskblock large,\n"
-#~ "but the disk is %d diskblocks long.\n"
+#~ " -a, --all enable all swaps from /etc/fstab\n"
+#~ " -d, --discard discard freed pages before they are reused\n"
+#~ " -e, --ifexists silently skip devices that do not exist\n"
+#~ " -f, --fixpgsz reinitialize the swap space if necessary\n"
+#~ " -p, --priority <prio> specify the priority of the swap device\n"
+#~ " -s, --summary display summary about used swap devices\n"
+#~ " --show[=<columns>] display summary in definable table\n"
+#~ " --noheadings don't print headings, use with --show\n"
+#~ " --raw use the raw output format, use with --show\n"
+#~ " --bytes display swap size in bytes in --show output\n"
+#~ " -v, --verbose verbose mode\n"
#~ msgstr ""
-#~ "整個磁碟分割區大小只有 %d 磁碟區塊，\n"
-#~ "但是這個磁碟大小為 %d 磁碟區塊。\n"
-
-#~ msgid "Partition %d does not start on cylinder boundary.\n"
-#~ msgstr "分割區 %d 並非始於磁柱邊界。\n"
-
-#~ msgid "Partition %d does not end on cylinder boundary.\n"
-#~ msgstr "分割區 %d 並非終於磁柱邊界。\n"
+#~ " -a, --all 全部啟用交換從/etc/fstab\n"
+#~ " -d, --discard 捨棄自由的頁面之前它們被重新使用\n"
+#~ " -e, --ifexists 寂靜的跳過裝置該不存在\n"
+#~ " -f, --fixpgsz 重新初始化交換空間如果必要的話\n"
+#~ " -p, --priority <prio> 指定優先權的交換裝置\n"
+#~ " -s, --summary 顯示概要關於使用的交換裝置\n"
+#~ " --show [=<欄位>] 顯示概要在中 definable 表格\n"
+#~ " --noheadings 不列印標頭，使用與 --show\n"
+#~ " --raw 使用原始輸出格式，使用與 --show\n"
+#~ " --bytes 顯示交換大小在中位元組在中 --show 輸出\n"
+#~ " -v, --verbose 詳細模式\n"
#, fuzzy
-#~ msgid "Partition %zd is already defined. Delete it before re-adding it.\n"
-#~ msgstr "分割區 %d 已經定義。 在重新加入之前刪除它。\n"
-
-#~ msgid " Last %s"
-#~ msgstr " 最後一筆 %s"
+#~ msgid ""
+#~ " -v, --verbose explain what is being done\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help output help screen and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -v, --verbose 解釋什麼正在是已完成\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 輸出說明畫面然後離開\n"
+#~ "\n"
#, fuzzy
-#~ msgid "Building a new SGI disklabel.\n"
-#~ msgstr "建立新的 SGI disklabel。\n"
+#~ msgid " -term <terminal_name>\n"
+#~ msgstr " [ -term terminal_name]\n"
#, fuzzy
-#~ msgid "HDIO_GETGEO ioctl failed on %s"
-#~ msgstr "HDIO_GETGEO ioctl 失敗的於 %s"
+#~ msgid " -reset\n"
+#~ msgstr " [ -reset ]\n"
#, fuzzy
-#~ msgid ""
-#~ "Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value "
-#~ "of %llu.\n"
-#~ "This value may be truncated for devices > 33.8 GB.\n"
-#~ msgstr ""
-#~ "警告： BLKGETSIZE ioctl 失敗的於 %s。 使用幾何位置磁柱值的 %llu。\n"
-#~ "這個值也許會被截斷用於裝置>33.8 GB。\n"
-
-#~ msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
-#~ msgstr "識別號=%02x\t開始=%d\t長度=%d\n"
+#~ msgid " -initialize\n"
+#~ msgstr " [ -initialize ]\n"
#, fuzzy
-#~ msgid "Trying to keep parameters of partitions already set.\n"
-#~ msgstr "嘗試保持參數的分割區已經設定。\n"
+#~ msgid " -cursor <on|off>\n"
+#~ msgstr " [ -cursor [on|off] ]\n"
-#~ msgid "YES\n"
-#~ msgstr "YES\n"
+#, fuzzy
+#~ msgid " -repeat <on|off>\n"
+#~ msgstr " [ -repeat [on|off] ]\n"
#, fuzzy
-#~ msgid "Building a new Sun disklabel."
-#~ msgstr "建立新的 Sun disklabel。\n"
+#~ msgid " -appcursorkeys <on|off>\n"
+#~ msgstr " [ -appcursorkeys [on|off] ]\n"
#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
-#~ "%llu cylinders, %d alternate cylinders, %d physical cylinders\n"
-#~ "%d extra sects/cyl, interleave %d:1\n"
-#~ "Label ID: %s\n"
-#~ "Volume ID: %s\n"
-#~ "Units = %s of %d * 512 bytes\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "磁碟 %s (Sun 磁碟標貼)：%u 前端，%llu 磁區，%d rpm\n"
-#~ "%llu 磁柱，%d 交替磁柱，%d 實體磁柱\n"
-#~ "%d 額外 sects/cyl，交插 %d:1\n"
-#~ "標貼識別號：%s\n"
-#~ "音量識別號：%s\n"
-#~ "單位=%s 的 %d * 512 位元組\n"
-#~ "\n"
+#~ msgid " -linewrap <on|off>\n"
+#~ msgstr " [ -linewrap [on|off] ]\n"
#, fuzzy
-#~ msgid ""
-#~ "\n"
-#~ "Disk %s (Sun disk label): %u heads, %llu sectors, %llu cylinders\n"
-#~ "Units = %s of %d * 512 bytes\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "磁碟 %s (Sun 磁碟標貼)：%u 前端，%llu 磁區，%llu 磁柱\n"
-#~ "單位=%s 的 %d * 512 位元組\n"
-#~ "\n"
+#~ msgid " -default\n"
+#~ msgstr " [ -default ]\n"
-#~ msgid "%*s Flag Start End Blocks Id System\n"
-#~ msgstr "%*s 旗標 開始 結束 區塊 識別號 系統\n"
+#, fuzzy
+#~ msgid " -inversescreen <on|off>\n"
+#~ msgstr " [ -inversescreen [on|off] ]\n"
-#~ msgid "Usage:"
-#~ msgstr "用法："
+#, fuzzy
+#~ msgid " -bold <on|off>\n"
+#~ msgstr " [ -bold [on|off] ]\n"
-#~ msgid "%s -An device\t activate partition n, inactivate the other ones\n"
-#~ msgstr "%s -An 裝置\t 啟用分割區 n, 停用另外一個\n"
+#, fuzzy
+#~ msgid " -blink <on|off>\n"
+#~ msgstr " [ -blink [on|off] ]\n"
-#~ msgid ""
-#~ "Done\n"
-#~ "\n"
-#~ msgstr ""
-#~ "完成\n"
-#~ "\n"
+#, fuzzy
+#~ msgid " -reverse <on|off>\n"
+#~ msgstr " [ -reverse [on|off] ]\n"
#, fuzzy
-#~ msgid "Created partition %zd\n"
-#~ msgstr "已選分割區 %d\n"
+#~ msgid " -underline <on|off>\n"
+#~ msgstr " [ -underline [on|off] ]\n"
#, fuzzy
-#~ msgid " %s [options] -u <USER> COMMAND\n"
-#~ msgstr " %s [選項] 命令\n"
+#~ msgid " -store\n"
+#~ msgstr " [ -store ]\n"
#, fuzzy
-#~ msgid " %s [options] [-] [USER [arg]...]\n"
-#~ msgstr " %s [選項] [-] [使用者 [arg]...]\n"
+#~ msgid " -clear <all|rest>\n"
+#~ msgstr " [ -clear [all|rest] ]\n"
#, fuzzy
-#~ msgid " and do not create a new session\n"
-#~ msgstr " 「%s」)\n"
+#~ msgid " -tabs <tab1 tab2 tab3 ...> (tabn = 1-160)\n"
+#~ msgstr " [ -tabs [ tab1 tab2 tab3 … ] ] (tabn = 1-160)\n"
#, fuzzy
-#~ msgid ""
-#~ " -1, --one show only current month (default)\n"
-#~ " -3, --three show previous, current and next month\n"
-#~ " -s, --sunday Sunday as first day of week\n"
-#~ " -m, --monday Monday as first day of week\n"
-#~ " -j, --julian output Julian dates\n"
-#~ " -y, --year show whole current year\n"
-#~ " -V, --version display version information and exit\n"
-#~ " -h, --help display this help text and exit\n"
-#~ "\n"
-#~ msgstr ""
-#~ " -1, --one 只顯示當月 (預設)\n"
-#~ " -3, --three 顯示前一個、目前的和次月\n"
-#~ " -s, --sunday 週日做為先週中某日\n"
-#~ " -m, --monday 週一做為先週中某日\n"
-#~ " -j, --julian 輸出儒略曆約會\n"
-#~ " -y, --year 顯示整個目前的年\n"
-#~ " -V, --version 顯示版本資訊然後離開\n"
-#~ " -h, --help 顯示這份說明文字然後離開\n"
-#~ "\n"
+#~ msgid " -clrtabs <tab1 tab2 tab3 ...> (tabn = 1-160)\n"
+#~ msgstr " [ -clrtabs [ tab1 tab2 tab3 … ] ] (tabn = 1-160)\n"
#, fuzzy
-#~ msgid ""
-#~ " -d, --udp use UDP only\n"
-#~ " -i, --id log the process ID too\n"
-#~ " -f, --file <file> log the contents of this file\n"
-#~ " -h, --help display this help text and exit\n"
-#~ msgstr ""
-#~ " -d, --udp 使用 UDP (TCP 是預設)\n"
-#~ " -i, --id 記錄檔處理識別號太\n"
-#~ " -f, --file <file> 記錄檔內容的這個檔案\n"
-#~ " -h, --help 顯示這份說明文字然後離開\n"
+#~ msgid " -regtabs <1-160>\n"
+#~ msgstr " [ -regtabs [1-160] ]\n"
#, fuzzy
-#~ msgid ""
-#~ " -n, --server <name> write to this remote syslog server\n"
-#~ " -P, --port <number> use this UDP port\n"
-#~ " -p, --priority <prio> mark given message with this priority\n"
-#~ " -s, --stderr output message to standard error as well\n"
-#~ msgstr ""
-#~ " -n, --server <name> 寫入這個遠端 syslog 伺服器\n"
-#~ " -P, --port<數字> 使用這個 UDP 通訊埠\n"
-#~ " -p, --priority<prio>標記給定的訊息與這個優先權\n"
-#~ " -s, --stderr 輸出訊息到標準錯誤同樣\n"
+#~ msgid " -blank <0-60|force|poke>\n"
+#~ msgstr " [ -blank [0-60|force|poke] ]\n"
#, fuzzy
-#~ msgid ""
-#~ " -t, --tag <tag> mark every line with this tag\n"
-#~ " -u, --socket <socket> write to this Unix socket\n"
-#~ " -V, --version output version information and exit\n"
-#~ "\n"
-#~ msgstr ""
-#~ " -t, --tag <tag> 標記每列與這個標籤\n"
-#~ " -u, --socket<通訊端>寫入這個 Unix 通訊端\n"
-#~ " -V, --version 輸出版本資訊然後離開\n"
-#~ "\n"
+#~ msgid " -dump <1-NR_CONSOLES>\n"
+#~ msgstr " [ -dump [1-NR_CONSOLES] ]\n"
#, fuzzy
-#~ msgid "Failed to open/create %s: %m\n"
-#~ msgstr "開啟時失敗/建立 %s：%m\n"
+#~ msgid " -append <1-NR_CONSOLES>\n"
+#~ msgstr " [ -append [1-NR_CONSOLES] ]\n"
#, fuzzy
-#~ msgid "Failed to lock %s: %m\n"
-#~ msgstr "鎖定 %s 時失敗：%m\n"
+#~ msgid " -msg <on|off>\n"
+#~ msgstr " [ -msg [on|off] ]\n"
-#~ msgid "Bad number: %s\n"
-#~ msgstr "不當的數字：%s\n"
+#, fuzzy
+#~ msgid " -msglevel <0-8>\n"
+#~ msgstr " [ -msglevel [0-8] ]\n"
#, fuzzy
-#~ msgid "--notime can't be used together with --ctime or --reltime"
-#~ msgstr "--notime 無法使用的一起與 --ctime 或 --reltime"
+#~ msgid " -powerdown <0-60>\n"
+#~ msgstr " [ -powerdown [0-60] ]\n"
#, fuzzy
-#~ msgid "find unused loop device failed"
-#~ msgstr "尋找未使用的迴圈裝置失敗"
+#~ msgid " -blength <0-2000>\n"
+#~ msgstr " [ -blength [0-2000] ]\n"
#, fuzzy
-#~ msgid ""
-#~ " -v, --verbose explain what is being done\n"
-#~ " -V, --version output version information and exit\n"
-#~ " -h, --help output help screen and exit\n"
-#~ "\n"
-#~ msgstr ""
-#~ " -v, --verbose 解釋什麼正在是已完成\n"
-#~ " -V, --version 輸出版本資訊然後離開\n"
-#~ " -h, --help 輸出說明畫面然後離開\n"
-#~ "\n"
+#~ msgid " -bfreq freqnumber\n"
+#~ msgstr " [ -bfreq 頻率數 ]\n"
#, fuzzy
-#~ msgid " %s [options] [<file>]\n"
-#~ msgstr " %s [選項] [<file>]\n"
+#~ msgid "Error writing screendump"
+#~ msgstr "寫入 screendump 時發生錯誤"
+
+#, fuzzy
+#~ msgid "Couldn't read neither /dev/vcsa0 nor /dev/vcsa"
+#~ msgstr "無法開啟 /dev/tty1 或 /dev/vc/1"
#, fuzzy
#~ msgid ""
#~ " -h, --help 顯示這份說明然後離開\n"
#~ "\n"
+#, fuzzy
+#~ msgid ""
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %s [options] [file ...]\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] [檔案...]\n"
+
+#, fuzzy
+#~ msgid ""
+#~ " -, --no-underlining suppress all underlining\n"
+#~ " -2, --half-lines print all half-lines\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ " -, --no-underlining 抑制所有底線\n"
+#~ " -2, --half-lines 列印所有 half-lines\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid "calling hexdump as od has been deprecated in favour to GNU coreutils od."
+#~ msgstr "呼叫 hexdump 做為 od 已被不宜用在中 favour 到 GNU coreutils od。"
+
#, fuzzy
#~ msgid ""
#~ "\n"
#~ "\n"
#, fuzzy
-#~ msgid " -V output version information and exit\n"
-#~ msgstr " -V 輸出版本資訊然後離開\n"
+#~ msgid ""
+#~ "Usage: %s [options] file...\n"
+#~ "\n"
+#~ msgstr ""
+#~ "用法：%s [選項] 檔案…\n"
+#~ "\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "Options:\n"
+#~ " -d display help instead of ring bell\n"
+#~ " -f count logical, rather than screen lines\n"
+#~ " -l suppress pause after form feed\n"
+#~ " -p do not scroll, clean screen and display text\n"
+#~ " -c do not scroll, display text and clean line ends\n"
+#~ " -u suppress underlining\n"
+#~ " -s squeeze multiple blank lines into one\n"
+#~ " -NUM specify the number of lines per screenful\n"
+#~ " +NUM display file beginning from line number NUM\n"
+#~ " +/STRING display file beginning from search string match\n"
+#~ " -V output version information and exit\n"
+#~ msgstr ""
+#~ "選項：\n"
+#~ " -d 顯示說明以代替環響鈴\n"
+#~ " -f 計數邏輯的，而非螢幕列\n"
+#~ " -l 抑制暫停之後表格饋送\n"
+#~ " -p 抑制捲動，清除螢幕和顯示文字\n"
+#~ " -c 抑制捲動，顯示文字和清除列結束\n"
+#~ " -u 抑制底線\n"
+#~ " -s squeeze 多重空列進入一個\n"
+#~ " -NUM 指定列號的各全螢幕\n"
+#~ " +NUM 顯示檔案起始部分從列號 NUM\n"
+#~ " +/字串 顯示檔案起始部分從搜尋字串匹配\n"
+#~ " -V 輸出版本資訊然後離開\n"
+
+#~ msgid "...back 1 page"
+#~ msgstr "…倒退 1 頁"
+
+#~ msgid "...skipping one line"
+#~ msgstr "…跳過 1 列"
+
+#~ msgid "line too long"
+#~ msgstr "列的長度過長"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "For more information see rev(1).\n"
+#~ msgstr ""
+#~ "\n"
+#~ "要獲得更多資訊請參看 rev (1)。\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Usage:\n"
+#~ " %s [option] file\n"
+#~ msgstr ""
+#~ "\n"
+#~ "用法：\n"
+#~ " %s [選項] 檔案\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "Options:\n"
+#~ " -n, --lines NUMBER output the last NUMBER lines\n"
+#~ " -NUMBER same as `-n NUMBER'\n"
+#~ " -V, --version output version information and exit\n"
+#~ " -h, --help display this help and exit\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\n"
+#~ "選項：\n"
+#~ " -n, --lines 數字 輸出最後一筆數字列\n"
+#~ " -NUMBER 如同『-n 數字』\n"
+#~ " -V, --version 輸出版本資訊然後離開\n"
+#~ " -h, --help 顯示這份說明然後離開\n"
+#~ "\n"
#, fuzzy
#~ msgid ""
#~ msgstr " 於整個磁碟。"
#, fuzzy
-#~| msgid "%s: does not support swapspace version %d.\n"
#~ msgid "does not support swapspace version %d."
#~ msgstr "不支援 swapspace 版本 %d。"
#~ " -l, --list list partitions (DEPRECATED)\n"
#~ " -s, --show list partitions\n"
#~ "\n"
-#~ " -b, --bytes print SIZE in bytes rather than in human readable "
-#~ "format\n"
+#~ " -b, --bytes print SIZE in bytes rather than in human readable format\n"
#~ " -g, --noheadings don't print headings for --show\n"
#~ " -n, --nr <n:m> specify the range of partitions (e.g. --nr 2:4)\n"
#~ " -o, --output <type> define which output columns to use\n"
#~ " -P, --pairs use key=\"value\" output format\n"
#~ " -r, --raw use raw output format\n"
-#~ " -t, --type <type> specify the partition type (dos, bsd, solaris, "
-#~ "etc.)\n"
+#~ " -t, --type <type> specify the partition type (dos, bsd, solaris, etc.)\n"
#~ " -v, --verbose verbose mode\n"
#~ msgstr ""
#~ " -a, --add 加入指定的分割區或所有的它們\n"
#~ " -t, --type<型態> 指定分割區類型 (DOS、bsd、solaris，etc.)\n"
#~ " -v, --verbose 詳細模式\n"
-#~ msgid ""
-#~ "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU "
-#~ "Parted."
+#~ msgid "Warning!! Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
#~ msgstr "警告 !! 偵測到不受支援的 GPT (GUID 分割表)。使用 GNU Parted。"
#~ msgid ""
#~ msgid "Warning: partition %d has empty type\n"
#~ msgstr "警告：分割區 %d 有空的類型\n"
-#~ msgid ""
-#~ "Type 0 means free space to many systems\n"
-#~ "(but not to Linux). Having partitions of\n"
-#~ "type 0 is probably unwise. You can delete\n"
-#~ "a partition using the `d' command.\n"
-#~ msgstr ""
-#~ "類型 0 對於許多系統而言表示剩餘空間\n"
-#~ "(並不包括 Linux)。具有\n"
-#~ "類型為 0 的分割區可能不太明智。您可以\n"
-#~ "使用「d」命令來刪除分割區。\n"
-
#~ msgid "Partition %i does not end on cylinder boundary.\n"
#~ msgstr "分割區 %i 並非結束於磁柱邊界。\n"
#~ msgid ""
#~ "\n"
-#~ "WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk "
-#~ "doesn't support GPT. Use GNU Parted.\n"
+#~ "WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
-#~ "警告：於「%s」偵測到 GPT (GUID 分割表)！工具程式 fdisk 不支援 GPT。請使用 "
-#~ "GNU Parted。\n"
+#~ "警告：於「%s」偵測到 GPT (GUID 分割表)！工具程式 fdisk 不支援 GPT。請使用 GNU Parted。\n"
#~ "\n"
#, fuzzy
-#~| msgid "Note: sector size is %d (not %d)\n"
#~ msgid "Note: sector size is %ld (not %d)\n"
#~ msgstr "註記：磁區大小是 %ld (無法 %d)\n"
#~ msgid ""
#~ "\n"
-#~ "WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk "
-#~ "doesn't support GPT. Use GNU Parted.\n"
+#~ "WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
-#~ "警告：GPT (GUID 分割表) 於「%s」偵測到！工具程式 sfdisk 不支援 GPT。使用 "
-#~ "GNU Parted。\n"
+#~ "警告：GPT (GUID 分割表) 於「%s」偵測到！工具程式 sfdisk 不支援 GPT。使用 GNU Parted。\n"
#~ "\n"
#~ msgid "Use the --force flag to overrule this check.\n"
#~ " -s, --shell<命令殼> 運行命令殼如果/etc/命令殼允許它\n"
#, fuzzy
-#~| msgid "%s: lseek failed"
#~ msgid "%s: exec failed"
#~ msgstr "%s：exec 失敗"
-#, fuzzy
-#~| msgid "%s: is not a directory"
-#~ msgid "%s: not a tty"
-#~ msgstr "%s：不是 tty"
-
-#, fuzzy
-#~| msgid "TIOCSCTTY failed: %m"
-#~ msgid "TIOCSCTTY: ioctl failed"
-#~ msgstr "TIOCSCTTY：ioctl 失敗"
-
#~ msgid "usage: %s [+format] [day month year]\n"
#~ msgstr "用法：%s [+format] [day month year]\n"
#~ msgstr " %s -l [ signal ]\n"
#, fuzzy
-#~| msgid "connect: %s.\n"
#~ msgid "connect %s"
#~ msgstr "連接 %s"
#, fuzzy
-#~| msgid "unexpected number of arguments"
-#~ msgid "invalid port number argument"
-#~ msgstr "無效的埠號引數"
-
-#, fuzzy
-#~| msgid "Usage: %s [options] device ...\n"
#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ "\n"
#~ "Options:\n"
#~ " -a, --all print all devices\n"
-#~ " -b, --bytes print SIZE in bytes rather than in human readable "
-#~ "format\n"
+#~ " -b, --bytes print SIZE in bytes rather than in human readable format\n"
#~ " -d, --nodeps don't print slaves or holders\n"
#~ " -D, --discard print discard capabilities\n"
-#~ " -e, --exclude <list> exclude devices by major number (default: RAM "
-#~ "disks)\n"
+#~ " -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
#~ " -I, --include <list> show only devices with specified major numbers\n"
#~ " -f, --fs output info about filesystems\n"
#~ " -h, --help usage information (this)\n"
#~ msgstr "參看如何使用檔案和 dirs 引數從位置 (1) 手動。\n"
#, fuzzy
-#~| msgid "Couldn't lock into memory, exiting.\n"
#~ msgid "mount: couldn't lock into memory"
#~ msgstr "掛載：無法鎖定進入記憶體"
#~ msgid "executing %s failed"
#~ msgstr "執行 %s 時失敗"
-#, fuzzy
-#~| msgid "unshare failed"
-#~ msgid "uname failed"
-#~ msgstr "uname 失敗"
-
#, fuzzy
#~ msgid ""
#~ " -C, --clear clear the kernel ring buffer\n"
#~ " -c, --read-clear read and clear all messages\n"
#~ " -D, --console-off disable printing messages to console\n"
#~ " -d, --show-delta show time delta between printed messages\n"
-#~ " -e, --reltime show local time and time delta in readable "
-#~ "format\n"
+#~ " -e, --reltime show local time and time delta in readable format\n"
#~ " -E, --console-on enable printing messages to console\n"
-#~ " -F, --file <file> use the file instead of the kernel log "
-#~ "buffer\n"
+#~ " -F, --file <file> use the file instead of the kernel log buffer\n"
#~ " -f, --facility <list> restrict output to defined facilities\n"
#~ " -h, --help display this help and exit\n"
#~ " -k, --kernel display kernel messages\n"
#~ " -l, --level <list> restrict output to defined levels\n"
#~ " -n, --console-level <level> set level of messages printed to console\n"
#~ " -r, --raw print the raw message buffer\n"
-#~ " -S, --syslog force to use syslog(2) rather than /dev/"
-#~ "kmsg\n"
+#~ " -S, --syslog force to use syslog(2) rather than /dev/kmsg\n"
#~ " -s, --buffer-size <size> buffer size to query the kernel ring buffer\n"
#~ " -T, --ctime show human readable timestamp (could be \n"
#~ " inaccurate if you have used SUSPEND/RESUME)\n"
#~ " -u, --userspace display userspace messages\n"
#~ " -V, --version output version information and exit\n"
#~ " -w, --follow wait for new messages\n"
-#~ " -x, --decode decode facility and level to readable "
-#~ "string\n"
+#~ " -x, --decode decode facility and level to readable string\n"
#~ msgstr ""
#~ " -C, --clear 清空內核環緩衝區\n"
#~ " -c, --read-clear 讀取和全部清除訊息\n"
#~ " -x, --decode 解碼機能和等級到 readable 字串\n"
#, fuzzy
-#~| msgid "cannot set user id"
#~ msgid "eject: cannot set user id"
#~ msgstr "退出：無法設定使用者識別號"
#, fuzzy
-#~| msgid ""
-#~| " -h, --help this help\n"
-#~| " -f, --freeze freeze the filesystem\n"
-#~| " -u, --unfreeze unfreeze the filesystem\n"
#~ msgid ""
#~ " -h, --help this help\n"
#~ " -f, --freeze freeze the filesystem\n"
#~ "\n"
#~ "要獲得更多資訊請參看 fsfreeze(8)。\n"
-#~ msgid "no action specified"
-#~ msgstr "未指定任何動作"
-
#~ msgid "max seg size (kbytes) = %lu\n"
#~ msgstr "最大資料段大小 (千位元組) = %lu\n"
#~ msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
#~ msgstr "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
-#~ msgid "semctl failed"
-#~ msgstr "semctl 失敗"
-
-#, fuzzy
-#~| msgid ""
-#~| "\n"
-#~| "Options:\n"
-#~| " -e | --encryption <type> enable data encryption with specified <name/"
-#~| "num>\n"
-#~| " -h | --help this help\n"
-#~| " -o | --offset <num> start at offset <num> into file\n"
-#~| " --sizelimit <num> loop limited to only <num> bytes of the file\n"
-#~| " -p | --pass-fd <num> read passphrase from file descriptor <num>\n"
-#~| " -r | --read-only setup read-only loop device\n"
-#~| " --show print device name (with -f <file>)\n"
-#~| " -v | --verbose verbose mode\n"
-#~| "\n"
+#, fuzzy
#~ msgid ""
-#~ " -e, --encryption <type> enable encryption with specified <name/"
-#~ "num>\n"
+#~ " -e, --encryption <type> enable encryption with specified <name/num>\n"
#~ " -o, --offset <num> start at offset <num> into file\n"
#~ " --sizelimit <num> device limited to <num> bytes of the file\n"
-#~ " -p, --pass-fd <num> read passphrase from file descriptor "
-#~ "<num>\n"
+#~ " -p, --pass-fd <num> read passphrase from file descriptor <num>\n"
#~ " -P, --partscan create partitioned loop device\n"
#~ " -r, --read-only setup read-only loop device\n"
#~ " --show print device name after setup (with -f)\n"
#~ msgstr "無效的密語檔案描述符號"
#, fuzzy
-#~| msgid "%s: unable to probe device"
#~ msgid "%s failed to use device"
#~ msgstr "%s 無法使用裝置"
#, fuzzy
-#~| msgid "Couldn't lock into memory, exiting.\n"
#~ msgid "couldn't lock into memory"
#~ msgstr "無法鎖定進入記憶體"
-#, fuzzy
-#~| msgid "failed to allocate outbuffer"
-#~ msgid "failed to allocate memory"
-#~ msgstr "配置記憶體時失敗"
-
#, fuzzy
#~ msgid ""
#~ " -a, --all print online and offline CPUs (default for -e)\n"
#~ " -p, --parse[=<list>] print out a parsable format\n"
#~ " -s, --sysroot <dir> use directory DIR as system root\n"
#~ " -V, --version print version information and exit\n"
-#~ " -x, --hex print hexadecimal masks rather than lists of "
-#~ "CPUs\n"
+#~ " -x, --hex print hexadecimal masks rather than lists of CPUs\n"
#~ msgstr ""
#~ " -a, --all 列印線上和離線 CPUs (預設用於 -e)\n"
#~ " -b, --online 列印線上 CPUs 只有 (預設用於 -p)\n"
#~ msgstr "renice 自 %s\n"
#, fuzzy
-#~| msgid ""
-#~| "usage: %s [options]\n"
-#~| " -d | --device <device> select rtc device (rtc0|rtc1|...)\n"
-#~| " -n | --dry-run does everything, but suspend\n"
-#~| " -l | --local RTC uses local timezone\n"
-#~| " -m | --mode standby|mem|... sleep mode\n"
-#~| " -s | --seconds <seconds> seconds to sleep\n"
-#~| " -t | --time <time_t> time to wake\n"
-#~| " -u | --utc RTC uses UTC\n"
-#~| " -v | --verbose verbose messages\n"
-#~| " -V | --version show version\n"
#~ msgid ""
#~ " -d, --device <device> select rtc device (rtc0|rtc1|...)\n"
#~ " -n, --dry-run does everything, but suspend\n"
#~ " -v, --verbose 詳細的訊息\n"
#, fuzzy
-#~| msgid "failed to execute %s"
#~ msgid "unable to execute %s"
#~ msgstr "無法執行 %s"
#, fuzzy
-#~| msgid ""
-#~| " -h, --help displays this help text\n"
-#~| " -v, --verbose says what options are being switched on\n"
-#~| " -R, --addr-no-randomize disables randomization of the virtual address "
-#~| "space\n"
-#~| " -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
-#~| " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
-#~| " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
-#~| " -X, --read-implies-exec turns on READ_IMPLIES_EXEC\n"
-#~| " -B, --32bit turns on ADDR_LIMIT_32BIT\n"
-#~| " -I, --short-inode turns on SHORT_INODE\n"
-#~| " -S, --whole-seconds turns on WHOLE_SECONDS\n"
-#~| " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
-#~| " -3, --3gb limits the used address space to a maximum of "
-#~| "3 GB\n"
-#~| " --4gb ignored (for backward compatibility only)\n"
#~ msgid ""
#~ " -v, --verbose says what options are being switched on\n"
-#~ " -R, --addr-no-randomize disables randomization of the virtual address "
-#~ "space\n"
+#~ " -R, --addr-no-randomize disables randomization of the virtual address space\n"
#~ " -F, --fdpic-funcptrs makes function pointers point to descriptors\n"
#~ " -Z, --mmap-page-zero turns on MMAP_PAGE_ZERO\n"
#~ " -L, --addr-compat-layout changes the way virtual memory is allocated\n"
#~ " -I, --short-inode turns on SHORT_INODE\n"
#~ " -S, --whole-seconds turns on WHOLE_SECONDS\n"
#~ " -T, --sticky-timeouts turns on STICKY_TIMEOUTS\n"
-#~ " -3, --3gb limits the used address space to a maximum of 3 "
-#~ "GB\n"
+#~ " -3, --3gb limits the used address space to a maximum of 3 GB\n"
#~ " --4gb ignored (for backward compatibility only)\n"
#~ " --uname-2.6 turns on UNAME26\n"
#~ msgstr ""
#~ " --uname-2.6 打開 UNAME26\n"
#, fuzzy
-#~| msgid "execv failed"
#~ msgid "execvp failed"
#~ msgstr "execvp 失敗"
#~ msgid ""
#~ " -a, --all umount all filesystems\n"
#~ " -c, --no-canonicalize don't canonicalize paths\n"
-#~ " -d, --detach-loop if mounted loop device, also free this loop "
-#~ "device\n"
+#~ " -d, --detach-loop if mounted loop device, also free this loop device\n"
#~ " --fake dry run; skip the umount(2) syscall\n"
-#~ " -f, --force force unmount (in case of an unreachable NFS "
-#~ "system)\n"
+#~ " -f, --force force unmount (in case of an unreachable NFS system)\n"
#~ msgstr ""
#~ " -a, --all umount 所有檔案系統\n"
#~ " -c, --no-canonicalize 不正則化路徑\n"
#~ msgid ""
#~ " -i, --internal-only don't call the umount.<type> helpers\n"
#~ " -n, --no-mtab don't write to /etc/mtab\n"
-#~ " -l, --lazy detach the filesystem now, and cleanup all "
-#~ "later\n"
+#~ " -l, --lazy detach the filesystem now, and cleanup all later\n"
#~ msgstr ""
#~ " -i, --internal-only 不呼叫 umount。<type> 輔助程式\n"
#~ " -n, --no-mtab 不寫入/etc/mtab\n"
#, fuzzy
#~ msgid ""
#~ " -O, --test-opts <list> limit the set of filesystems (use with -a)\n"
-#~ " -r, --read-only In case unmounting fails, try to remount read-"
-#~ "only\n"
+#~ " -r, --read-only In case unmounting fails, try to remount read-only\n"
#~ " -t, --types <list> limit the set of filesystem types\n"
#~ " -v, --verbose say what is being done\n"
#~ msgstr ""
#~ " -v, --verbose 表示什麼正在是已完成\n"
#, fuzzy
-#~| msgid ""
-#~| "Run program with some namespaces unshared from parent\n"
-#~| "\n"
-#~| " -h, --help usage information (this)\n"
-#~| " -m, --mount unshare mounts namespace\n"
-#~| " -u, --uts unshare UTS namespace (hostname etc)\n"
-#~| " -i, --ipc unshare System V IPC namespace\n"
-#~| " -n, --net unshare network namespace\n"
#~ msgid ""
#~ " -m, --mount unshare mounts namespace\n"
#~ " -u, --uts unshare UTS namespace (hostname etc)\n"
#~ " -n, --net unshare 網路命名空間\n"
#, fuzzy
-#~| msgid "%s: version %s\n"
#~ msgid "%-15s%s [version %x]\n"
#~ msgstr "%-15s%s [版本 %x]\n"
#~ msgstr "太多 iov's (變更 wall/ttymsg.c 中的編碼)"
#, fuzzy
-#~| msgid "col: write error.\n"
#~ msgid "write error."
#~ msgstr "寫入錯誤。"
#, fuzzy
-#~| msgid "Usage: %s [options] device ...\n"
#~ msgid ""
#~ "\n"
#~ "Usage: %s [options] [file ...]\n"
#~ " -x, --fillrows 填充列之前欄位\n"
#, fuzzy
-#~| msgid ""
-#~| "\n"
-#~| "For more information see ipcmk(1).\n"
-#~| "\n"
#~ msgid ""
#~ "\n"
#~ "For more information see column(1).\n"
#~ "要獲得更多資訊請參看欄 (1)。\n"
#, fuzzy
-#~| msgid "mkfs (%s)\n"
#~ msgid "more (%s)\n"
#~ msgstr "更多 (%s)\n"
#, fuzzy
-#~| msgid "Usage: %s [options] device ...\n"
#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ msgid "%s: cannot open %s\n"
#~ msgstr "%s：無法開啟 %s\n"
-#~ msgid "parse error\n"
-#~ msgstr "剖析錯誤\n"
-
#~ msgid "usage: %s [ -n ] device\n"
#~ msgstr "用法：%s [-n] 裝置\n"
#~ msgid "Usage: %s [-larvsmf] /dev/name\n"
#~ msgstr "用法：%s [-larvsmf] /dev/name\n"
-#~ msgid "unable to open '%s': %s"
-#~ msgstr "無法開啟「%s」：%s"
-
-#~ msgid "%s: failed to open: %s\n"
-#~ msgstr "%s：開啟失敗：%s\n"
-
#~ msgid "Usage: %s [-x] [-d <num>] iso9660-image\n"
#~ msgstr "用法：%s [-x] [-d<num>] iso9660-image\n"
#~ msgid "Usage: %s [-c] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n"
#~ msgstr "用法：%s [-c] [-p頁面大小] [-L 標籤] [-U UUID] /dev/名稱 [區塊]\n"
-#~ msgid "Out of memory"
-#~ msgstr "記憶體不足"
-
#~ msgid "%s: error: will not try to make swapdevice on '%s'\n"
#~ msgstr "%s：錯誤：將不會試著於「%s」製作交換裝置\n"
#~ msgid " n add a new BSD partition"
#~ msgstr " n 加入新的 BSD 分割"
-#~ msgid " p print BSD partition table"
-#~ msgstr " p 印出 BSD 分割表"
-
#~ msgid " t change a partition's filesystem id"
#~ msgstr " t 變更分割區的檔案系統識別號"
#~ "在此之後，前一個內容當然將無法回復。\n"
#~ "\n"
-#~ msgid "You will not be able to write the partition table.\n"
-#~ msgstr "您將不能寫入分割表。\n"
-
#~ msgid ""
#~ "This disk has both DOS and BSD magic.\n"
#~ "Give the 'b' command to go to BSD mode.\n"
#~ "這個磁碟同時有 DOS 和 BSD 特殊碼。\n"
#~ "輸入「b」命令以前往 BSD 模式。\n"
-#~ msgid ""
-#~ "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF "
-#~ "disklabel\n"
+#~ msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n"
#~ msgstr "裝置不含有效的 DOS 分割表，也不含 Sun、SGI 或 OSF 磁碟標籤\n"
#~ msgid "Internal error\n"
#~ " %s\n"
#~ " p 主要分割區 (1-4)\n"
-#~ msgid "Cannot open %s\n"
-#~ msgstr "無法開啟 %s\n"
-
#~ msgid "This kernel finds the sector size itself - -b option ignored\n"
#~ msgstr "內核自行找到磁區大小 - -b 選項忽略\n"
#~ msgid " -s [or --show-size]: list size of a partition"
#~ msgstr " -s [或 --show-size]：列出分割區大小"
-#~ msgid " -c [or --id]: print or change partition Id"
-#~ msgstr " -c [或 --id]： 印出或變更分割區識別號"
-
-#~ msgid ""
-#~ " -d [or --dump]: idem, but in a format suitable for later input"
+#~ msgid " -d [or --dump]: idem, but in a format suitable for later input"
#~ msgstr " -d [或 --dump]： idem，但是格式是適於稍後輸入"
-#~ msgid ""
-#~ " -i [or --increment]: number cylinders etc. from 1 instead of from 0"
+#~ msgid " -i [or --increment]: number cylinders etc. from 1 instead of from 0"
#~ msgstr " -i [或 --increment]：磁柱等項的編號。從 1 而非 0 開始"
-#~ msgid ""
-#~ " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/"
-#~ "cylinders/MB"
+#~ msgid " -uS, -uB, -uC, -uM: accept/report in units of sectors/blocks/cylinders/MB"
#~ msgstr " -uS，-uB，-uC，-uM： 接受/報告的單位是磁區/區塊/磁柱/MB"
-#~ msgid " -T [or --list-types]:list the known partition types"
-#~ msgstr " -T [或 --list-types]：列出已知分割區類型"
-
#~ msgid " -D [or --DOS]: for DOS-compatibility: waste a little space"
#~ msgstr " -D [或 --DOS]： 用於 DOS-相容性：浪費一些空間"
#~ msgid " -R [or --re-read]: make kernel reread partition table"
#~ msgstr " -R [或 --re-read]： 讓內核重新讀取分割表"
-#~ msgid " -N# : change only the partition with number #"
-#~ msgstr " -N# ： 只變更編號為 # 的分割區"
-
-#~ msgid ""
-#~ " -O file : save the sectors that will be overwritten to file"
+#~ msgid " -O file : save the sectors that will be overwritten to file"
#~ msgstr " -O 檔案 ： 把將要被覆寫的磁區儲存到檔案"
#~ msgid " -I file : restore these sectors again"
#~ msgid " -g [or --show-geometry]: print the kernel's idea of the geometry"
#~ msgstr " -g [或 --show-geometry]：印出內核對於硬碟結構參數的認知"
-#~ msgid ""
-#~ " -L [or --Linux]: do not complain about things irrelevant for "
-#~ "Linux"
+#~ msgid " -L [or --Linux]: do not complain about things irrelevant for Linux"
#~ msgstr " -L [或 --Linux]： 不抱怨對於 Linux 而言並不重要的東西"
-#~ msgid " -q [or --quiet]: suppress warning messages"
-#~ msgstr " -q [或 --quiet]： 抑制警告訊息"
-
#~ msgid " You can override the detected geometry using:"
#~ msgstr " 您可以強制變更偵測到的硬碟結構參數而使用："
-#~ msgid "You can disable all consistency checking with:"
-#~ msgstr "您可以停用所有的一致性檢查藉由："
-
#~ msgid " -f [or --force]: do what I say, even if it is stupid"
#~ msgstr " -f [或 --force]： 照我所說的去做，即使它有些愚蠢"
#~ msgid "Couldn't allocate memory for filesystem types\n"
#~ msgstr "無法配置記憶體給檔案系統類型\n"
-#~ msgid ""
-#~ "Usage: fsck [-AMNPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] "
-#~ "[filesys ...]\n"
-#~ msgstr ""
-#~ "用法：fsck [-AMNPRTV] [ -C [ fd ] ] [-t 檔案系統類型] [檔案系統選項] [檔案"
-#~ "系統 …]\n"
-
-#~ msgid "Couldn't open %s: %s\n"
-#~ msgstr "無法開啟 %s：%s\n"
+#~ msgid "Usage: fsck [-AMNPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]\n"
+#~ msgstr "用法：fsck [-AMNPRTV] [ -C [ fd ] ] [-t 檔案系統類型] [檔案系統選項] [檔案系統 …]\n"
#~ msgid "fsck from %s\n"
#~ msgstr "fsck 來自 %s\n"
#~ " -s | --hctosys set the system time from the hardware clock\n"
#~ " -w | --systohc set the hardware clock to the current system time\n"
#~ " --systz set the system time based on the current timezone\n"
-#~ " --adjust adjust the rtc to account for systematic drift "
-#~ "since\n"
+#~ " --adjust adjust the rtc to account for systematic drift since\n"
#~ " the clock was last set or adjusted\n"
#~ " --getepoch print out the kernel's hardware clock epoch value\n"
-#~ " --setepoch set the kernel's hardware clock epoch value to "
-#~ "the \n"
+#~ " --setepoch set the kernel's hardware clock epoch value to the \n"
#~ " value given with --epoch\n"
#~ " --predict predict rtc reading at time given with --date\n"
#~ " -v | --version print out the version of hwclock to stdout\n"
#~ " -f | --rtc=path special /dev/... file to use instead of default\n"
#~ " --directisa access the ISA bus directly instead of %s\n"
#~ " --badyear ignore rtc's year because the bios is broken\n"
-#~ " --date specifies the time to which to set the hardware "
-#~ "clock\n"
+#~ " --date specifies the time to which to set the hardware clock\n"
#~ " --epoch=year specifies the year which is the beginning of the \n"
#~ " hardware clock's epoch value\n"
#~ " --noadjfile do not access /etc/adjtime. Requires the use of\n"
#~ " either --utc or --localtime\n"
#~ " --adjfile=path specifies the path to the adjust file (default is\n"
#~ " /etc/adjtime)\n"
-#~ " --test do everything except actually updating the "
-#~ "hardware\n"
+#~ " --test do everything except actually updating the hardware\n"
#~ " clock or anything else\n"
#~ " -D | --debug debug mode\n"
#~ "\n"
#~ "您已指定多重功能。\n"
#~ "您只能一次實行一個功能。\n"
-#~ msgid ""
-#~ "%s: The --utc and --localtime options are mutually exclusive. You "
-#~ "specified both.\n"
+#~ msgid "%s: The --utc and --localtime options are mutually exclusive. You specified both.\n"
#~ msgstr "%s：--utc 和 --localtime 選項互斥。 您卻已指定兩者。\n"
-#~ msgid ""
-#~ "%s: The --adjust and --noadjfile options are mutually exclusive. You "
-#~ "specified both.\n"
+#~ msgid "%s: The --adjust and --noadjfile options are mutually exclusive. You specified both.\n"
#~ msgstr "%s：--adjust 和 --noadjfile 選項互斥。 您卻已指定兩者。\n"
-#~ msgid ""
-#~ "%s: The --adjfile and --noadjfile options are mutually exclusive. You "
-#~ "specified both.\n"
+#~ msgid "%s: The --adjfile and --noadjfile options are mutually exclusive. You specified both.\n"
#~ msgstr "%s：--adjust 和 --noadjfile 選項互斥。 您卻已指定兩者。\n"
#~ msgid "Open of %s failed"
#~ msgstr "開啟 %s 時失敗"
-#~ msgid "Unable to open %s"
-#~ msgstr "無法開啟 %s"
-
#~ msgid "can't malloc initstring"
#~ msgstr "無法 malloc 初始字串"
#~ msgid ""
-#~ "Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] baud_rate,... line [termtype]\n"
-#~ "or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] line baud_rate,... [termtype]\n"
+#~ "Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n"
+#~ "or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n"
#~ msgstr ""
-#~ "用法：%s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] baud_rate,... line [termtype]\n"
-#~ "或\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H "
-#~ "login_host] line baud_rate,... [termtype]\n"
+#~ "用法：%s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n"
+#~ "或\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n"
#~ msgid "login: memory low, login may fail\n"
#~ msgstr "登入：記憶體減少，登入也可能會失敗\n"
#~ msgid "can't malloc for grplist"
#~ msgstr "無法將 malloc 用於 grplist"
-#~ msgid "Login on %s from %s denied by default.\n"
-#~ msgstr "預設會拒絕從 %2$s 登入到 %1$s。\n"
-
#~ msgid "Login on %s from %s denied.\n"
#~ msgstr "從 %2$s 到 %1$s 的登入被拒。\n"
#~ msgid "last: malloc failure.\n"
#~ msgstr "last：malloc 失敗。\n"
-#~ msgid "last: gethostname"
-#~ msgstr "last：gethostname"
-
#~ msgid "login: Out of memory\n"
#~ msgstr "登入：記憶體不足\n"
-#~ msgid "%s login refused on this terminal.\n"
-#~ msgstr "%s 於此終端機被拒絕登入。\n"
-
#~ msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
#~ msgstr "從 %2$s 於 TTY %3$s 被拒絕登入 %1$s"
#~ msgid "login: failure forking: %s"
#~ msgstr "login：衍生程式失敗：%s"
-#~ msgid "No directory %s!\n"
-#~ msgstr "目錄 %s 不存在！\n"
-
-#~ msgid "login: no memory for shell script.\n"
-#~ msgstr "login：無記憶體可用於命令稿。\n"
-
#~ msgid "login: no shell: %s.\n"
#~ msgstr "login：無命令殼：%s。\n"
#~ msgid "login names may not start with '-'.\n"
#~ msgstr "登入名稱不可用「-」啟始。\n"
-#~ msgid "too many bare linefeeds.\n"
-#~ msgstr "太多單純換列字元。\n"
-
#~ msgid "EXCESSIVE linefeeds"
#~ msgstr "EXCESSIVE 換列字元"
#~ msgid "Executing the program \"%s\" ...\n"
#~ msgstr "正在執行程式「%s」…\n"
-#~ msgid "Error executing\t%s\n"
-#~ msgstr "發生錯誤於執行\t%s\n"
-
#~ msgid "URGENT: broadcast message from %s:"
#~ msgstr "緊急：廣播訊息來自 %s："
#~ "\n"
#~ "錯誤的密碼。\n"
-#~ msgid "lstat of path failed\n"
-#~ msgstr "路徑 lstat 時失敗\n"
-
#~ msgid "respawning: \"%s\" too fast: quenching entry\n"
#~ msgstr "respawning：「%s」太快：停息項目\n"
#~ msgid "logger: %s: %s.\n"
#~ msgstr "logger：%s: %s。\n"
-#~ msgid ""
-#~ "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] "
-#~ "[ message ... ]\n"
-#~ msgstr ""
-#~ "用法：logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message … ]\n"
+#~ msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n"
+#~ msgstr "用法：logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message … ]\n"
#~ msgid "usage: look [-dfa] [-t char] string [file]\n"
#~ msgstr "用法：look [-dfa] [-t 字元] 字串 [檔案]\n"
-#~ msgid "Could not open %s\n"
-#~ msgstr "無法開啟 %s\n"
-
#~ msgid "out of memory?"
#~ msgstr "記憶體不足？"
-#~ msgid "could not stat '%s'"
-#~ msgstr "無法顯示狀態「%s」"
-
#~ msgid "%s: out of memory\n"
#~ msgstr "%s：記憶體用盡\n"
#~ msgid "%s: write error %d: %s\n"
#~ msgstr "%s：寫入錯誤 %d：%s\n"
-#~ msgid "%s: write error: %s\n"
-#~ msgstr "%s：寫入錯誤：%s\n"
-
-#~ msgid "cannot open timing file %s"
-#~ msgstr "無法開啟時序檔案 %s"
-
-#~ msgid "cannot open typescript file %s"
-#~ msgstr "無法開啟 typescript 檔案 %s"
-
#~ msgid " [ -snow [on|off] ]\n"
#~ msgstr " [ -snow [on|off] ]\n"
#~ msgid "invalid offset value '%s' specified"
#~ msgstr "指定了無效的偏移值「%s」"
-#~ msgid "--offset and --all are mutually exclusive"
-#~ msgstr "--offset 和 --all 彼此互斥"
-
#~ msgid "usage: write user [tty]\n"
#~ msgstr "用法：write user [tty]\n"
#~ " %1$s -d | --detach <loopdev> [<loopdev> ...] delete\n"
#~ " %1$s -f | --find find unused\n"
#~ " %1$s -c | --set-capacity <loopdev> resize\n"
-#~ " %1$s -j | --associated <file> [-o <num>] list all associated with "
-#~ "<file>\n"
+#~ " %1$s -j | --associated <file> [-o <num>] list all associated with <file>\n"
#~ " %1$s [ options ] {-f|--find|loopdev} <file> setup\n"
#~ msgstr ""
#~ "\n"
#~ msgid "CPU mask"
#~ msgstr "CPU 遮罩"
-#~ msgid "parse error at lines: "
-#~ msgstr "剖析錯誤發生於列號："
-
#~ msgid " and %d."
#~ msgstr " 和 %d。"
#~ msgid "Usage: ctrlaltdel hard|soft\n"
#~ msgstr "用法：ctrlaltdel hard|soft\n"
-#~ msgid ""
-#~ "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T "
-#~ "value]) [-g|-G] file [file...]\n"
-#~ msgstr ""
-#~ "用法：%s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T "
-#~ "value]) [-g|-G] file [file…]\n"
+#~ msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n"
+#~ msgstr "用法：%s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file…]\n"
#~ msgid "Can't open %s: %s\n"
#~ msgstr "無法開啟 %s: %s\n"
#~ msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
#~ msgstr "不宜用法：%s {shm | msg | sem} id …\n"
-#~ msgid "unknown resource type: %s\n"
-#~ msgstr "不明的資源類型：%s\n"
-
#~ msgid ""
#~ "usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
#~ " [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
#~ " %1$s [-s|-m|-q] -i 識別號\n"
#~ " %1$s -h 以獲得說明\n"
-#~ msgid ""
-#~ "Usage: %1$s [resource]... [output-format]\n"
-#~ " %1$s [resource] -i id\n"
-#~ "\n"
-#~ msgstr ""
-#~ "用法：%1$s [資源]... [輸出格式]\n"
-#~ " %1$s [資源] -i 識別號\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "Provide information on IPC facilities for which you have read access.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "對於您有讀取權限的項目，提供 ipc 機能的資訊。\n"
-#~ "\n"
-
#~ msgid ""
#~ "Resource options:\n"
#~ " -m shared memory segments\n"
#~ msgid "pages resident %ld\n"
#~ msgstr "常駐記憶體頁 %ld\n"
-#~ msgid "pages swapped %ld\n"
-#~ msgstr "已交換記憶體頁 %ld\n"
-
#~ msgid "Swap performance: %ld attempts\t %ld successes\n"
#~ msgstr "交換效能：%ld 次嘗試\t%ld 次成功\n"
#~ msgid ""
#~ "\n"
-#~ "Usage: %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> "
-#~ "<device>\n"
+#~ "Usage: %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
#~ msgstr ""
#~ "\n"
-#~ "用法：%s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> "
-#~ "<device>\n"
+#~ "用法：%s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
#~ msgid "ldattach from %s\n"
#~ msgstr "ldattach 自 %s\n"
-#~ msgid "error: cannot open %s"
-#~ msgstr "錯誤：無法開啟 %s"
-
#~ msgid "error: strdup failed"
#~ msgstr "錯誤：strdup 失敗"
#~ " -p, --parse 以可剖析格式印出以代替可列印格式。\n"
#~ " -s, --sysroot 使用此目錄做為新系統的根目錄。\n"
-#~ msgid "out of memory"
-#~ msgstr "記憶體不足"
-
#~ msgid ""
#~ "%s: Usage: \"%s [options]\n"
#~ "\t -m <mapfile> (defaults: \"%s\" and\n"
#~ msgid "hexdump: bad skip value.\n"
#~ msgstr "hexdump：不當的跳過值。\n"
-#~ msgid ""
-#~ "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] "
-#~ "[file ...]\n"
-#~ msgstr ""
-#~ "hexdump：[-bcCdovx] [-e 格式] [-f 格式檔案] [-n 長度] [-s 跳過] [檔案 …]\n"
+#~ msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n"
+#~ msgstr "hexdump：[-bcCdovx] [-e 格式] [-f 格式檔案] [-n 長度] [-s 跳過] [檔案 …]\n"
#~ msgid "usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n"
#~ msgstr "用法：%s [-dflpcsu] [+列號 | +/式樣] 名稱一 名稱二…\n"
#~ msgid "usage: rev [file ...]\n"
#~ msgstr "用法：rev [檔案…]\n"
-#~ msgid "cannot stat \"%s\""
-#~ msgstr "無法識別「%s」狀態"
-
#~ msgid "usage: tailf [-n N | -N] logfile"
#~ msgstr "用法：tailf [-n N | -N] 日誌檔案"
projects / thirdparty / util-linux.git / blobdiff