Testing for the GCC version 5 or later isn't right, since C++ 11 support
wasn't enabled by default until later. This patch tests the C++ standard
support directly instead of inferring it from the GCC version.
gold/
* incremental.cc (Sized_incremental_binary::setup_readers): Use
emplace_back for C++ 11 or later.
Alan Modra [Fri, 6 Jul 2018 05:37:08 +0000 (15:07 +0930)]
Fix diagnostic errors
Fixes a number of build errors like the following
.../elf32-arm.c: In function 'elf32_arm_nabi_write_core_note':
.../elf32-arm.c:2177: error: #pragma GCC diagnostic not allowed inside functions
.../elf32-arm.c:2186: error: #pragma GCC diagnostic not allowed inside functions
See the comment in diagnostics.h.
Tamar Christina [Fri, 6 Jul 2018 15:15:41 +0000 (16:15 +0100)]
Fix the read/write flag for these registers on AArch64
The previous constraints were based on information already in opcodes and it
seems that a few of them were wrong. I have now hand verified the ones changed
by the previous patch and corrected where needed.
This prevents a warning to be issued when one shouldn't be.
Alan Modra [Tue, 3 Jul 2018 08:27:36 +0000 (17:57 +0930)]
Correct removal of .gnu.attributes
Setting SEC_EXCLUDE for empty .gnu.attributes is too late in the link
process for the linker to remove the section. That must be done in
bfd_elf_final_link, as we do for removed group sections.
* elflink.c (bfd_elf_final_link): Remove zero size .gnu.attributes
sections.
Alan Modra [Tue, 3 Jul 2018 05:20:38 +0000 (14:50 +0930)]
GNU attribute output on errors
.gnu.attributes entries from linker input files are merged to the
output file, the output having the union of compatible input
attributes. Incompatible attributes generally cause a linker error
and no output. However in some cases only a warning is emitted, and
one of the incompatible input attributes is passed on to the output.
PowerPC tends to emit warnings rather than errors, and the output
takes the first input attribute. For example, if we have two input
files with Tag_GNU_Power_ABI_FP, the first with a value signifying
"double-precision hard float, IBM long double", the second with a
value signifying "double-precision hard float, IEEE long double",
we'll get a warning about incompatible long double types and the
output will say "double-precision hard float, IBM long double".
The output attribute of course isn't correct. It would be correct to
specify "IBM and IEEE long double", but we don't have a way to
represent that currently. While it would be possible to extend the
encoding, there isn't much gain in doing so. A shared library
providing support for both long double types should link against
objects using either long double type without warning or error. That
is what you'd get if such a shared library had no Tag_GNU_Power_ABI_FP
attribute.
So this patch provides a way for the backend to omit .gnu.attributes
tags from the output.
Tamar Christina [Fri, 29 Jun 2018 11:12:27 +0000 (12:12 +0100)]
Fix AArch64 encodings for by element instructions.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
Alan Modra [Wed, 27 Jun 2018 03:17:13 +0000 (12:47 +0930)]
gas object file locations
With the update to newer autotools, some gas object files are now
built in config/, breaking xtensa-elf and ia64-vms. This patch fixes
the dependencies.
* configure.ac: Specify extra_objects with leading "config/"
for xtensa-relax.o and te-vms.o. Use case statements to unique
extra_objects. Formatting.
* configure: Regenerate.
Cary Coutant [Sat, 23 Jun 2018 00:28:05 +0000 (17:28 -0700)]
Add x86-64 support for Indirect Branch Tracking (IBT).
gold/
PR gold/22915
* x86_64.cc (Output_data_plt_x86_64_ibt): New class.
(Target_x86_64::do_make_data_plt): (All instantiations) Check for
IBT feature bit and create IBT PLTs.
Cary Coutant [Sat, 23 Jun 2018 06:36:50 +0000 (23:36 -0700)]
Update support for .note.gnu.property sections.
The original patch did not give the target enough hooks to discover that
an input object file does not have a particular property. For the
GNU_PROPERTY_X86_FEATURE_1_AND property, for example, where a missing
property should be assumed to be all zeroes, and ANDed with other
object modules, this is essential. We now store the target-specific
properties locally in the Target structure as native uint32_t fields,
then AND the per-object feature bits with the program's feature bits
when we're finished processing each input object file. The target-specific
properties are then added back to the output note section during
finalization.
gold/
PR gold/22914
* layout.cc (read_sized_value): Fix spelling of section name.
(Layout::layout_gnu_property): Call Sized_target::record_gnu_property
for target-specific properties;
don't store them with target-independent properties yet.
(Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
(Layout::create_gnu_properties_note): Call target to finalize
target-specific properties. Fix spelling of output section name.
* layout.h (Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
* object.cc (Sized_relobj_file::do_layout): Call
Layout::merge_gnu_properties.
* target.h (Target::merge_gnu_property): Remove.
(Target::finalize_gnu_properties): New method.
(Target::do_merge_gnu_property): Move to Sized_target and rename.
(Target::do_finalize_gnu_properties): New virtual method.
(Sized_target::record_gnu_property): Moved and renamed from
Target::do_merge_gnu_property.
(Sized_target::merge_gnu_properties): New virtual method.
* x86_64.cc (Target_x86_64::isa_1_used_, isa_1_needed_)
(feature_1_, object_feature_1_, seen_first_object_): New data members.
(Target_x86_64::do_merge_gnu_property): Rename to ...
(Target_x86_64::record_gnu_property): ... this. Save target-specific
properties in Target class object.
(Target_x86_64::merge_gnu_properties): New method.
(add_property): New static inline function.
(Target_x86_64::do_finalize_gnu_properties): New method.
* testsuite/Makefile.am (gnu_property_test): Remove C source file;
link directly without compiler driver.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: Add _start.
Cary Coutant [Sat, 23 Jun 2018 01:19:51 +0000 (18:19 -0700)]
Silence GCC 9 error about deprecated implicit copy constructor.
Replacing push_back() with emplace_back() eliminates the calls to the
copy constructor, but I still had to provide explicit copy constructors
because of the call to vector::reserve(), which tries to instantiate them
even though they'll never actually be called when reserve() is called
on an empty vector.
gold/
* incremental.cc (Sized_incremental_binary::setup_readers): Use
emplace_back for GCC 5 and later.
* incremental.h (Incremental_binary::Input_reader): Provide copy
constructor.
(Sized_incremental_binary::Sized_input_reader): Likewise.
Cary Coutant [Fri, 22 Jun 2018 16:27:39 +0000 (09:27 -0700)]
Add support for .note.gnu.property sections.
elfcpp/
PR gold/22914
* elfcpp.h (NT_GNU_PROPERTY_TYPE_0): New note type.
(GNU_PROPERTY_*): New Gnu property types.
* x86_64.h (GNU_PROPERTY_X86_FEATURE_1_IBT)
(GNU_PROPERTY_X86_FEATURE_1_SHSTK): New x86 feature bits.
gold/
PR gold/22914
* layout.cc (Layout::Layout): Initialize gnu_properties_.
(read_sized_value, write_sized_value): New functions.
(Layout::layout_gnu_property): New method.
(Layout::create_notes): Call create_gnu_properties_note.
(Layout::create_gnu_properties_note): New method.
* layout.h (Layout::layout_gnu_property): New method.
(Layout::create_gnu_properties_note): New method.
(Layout::Gnu_property, Layout::Gnu_properties): New types.
(Layout::gnu_properties_): New data member.
* object.cc (Sized_relobj_file::layout_gnu_property_section): New
method.
(Sized_relobj_file::do_layout): Handle .note.gnu.property sections.
* object.h (Sized_relobj_file::layout_gnu_property_section): New
method.
* target.h (Target::merge_gnu_property): New method.
(Target::do_merge_gnu_property): New virtual method.
* x86_64.cc (Target_x86_64::do_merge_gnu_property): New method.
* testsuite/Makefile.am (gnu_property_test): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: New source file.
* testsuite/gnu_property_b.S: New source file.
* testsuite/gnu_property_c.S: New source file.
* testsuite/gnu_property_main.c: New source file.
* testsuite/gnu_property_test.sh: New test script.
Alan Hayward [Wed, 20 Jun 2018 17:19:05 +0000 (18:19 +0100)]
Use partial register read/writes in transfer_regset
This avoids assert failures when the register is bigger than the
slot size. This happens on Aarch64 when truncating Z registers
into an fpsimd structure. This can be triggered by running
gdb command "generate-core-file".
Also, when the register is smaller then the slot size, then
zero pad when writing to the slot, and truncate when writing
to the regcache. This happens on Aarch64 with the CPSR register.
Continue to ensure registers are invalidated when both buffers
are null.
gdb/
* regcache.c (readable_regcache::read_part): Fix asserts.
(reg_buffer::raw_collect_part): New function.
(regcache::write_part): Fix asserts.
(reg_buffer::raw_supply_part): New function.
(regcache::transfer_regset_register): New helper function.
(regcache::transfer_regset): Call new functions.
(regcache_supply_regset): Use gdb_byte*.
(regcache::supply_regset): Likewise.
(regcache_collect_regset): Likewise.
(regcache::collect_regset): Likewise.
* regcache.h (reg_buffer::raw_collect_part): New declaration.
(reg_buffer::raw_supply_part): Likewise.
(regcache::transfer_regset_register): Likewise.
(regcache::transfer_regset): Use gdb_byte*.
Tamar Christina [Fri, 22 Jun 2018 11:27:53 +0000 (12:27 +0100)]
Correct negs aliasing on AArch64.
This patch fixes a disassembly issue with the aliases to subs with a shifted
register. The subs instruction with the zero register as destination is
supposed to alias to cmp and when the first input register is the zero register
the subs is supposed to be aliased to negs.
This means that a subs with destination and first input registers the zero
register is supposed to be a cmp.
This is done by raising the priority of the cmp alias.
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Fix alias flag for negs
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
gas/
* testsuite/gas/aarch64/addsub.s: Add negs to zero reg test.
* testsuite/gas/aarch64/addsub.d: Likewise.
Cary Coutant [Thu, 21 Jun 2018 20:51:16 +0000 (13:51 -0700)]
Fix treatment of symbol versions with unused as-needed libraries.
When we have a weak reference to a symbol defined in an
as-needed library, and that library ends up not-needed, gold
simply clears the version information in the symbol table, even
if the symbol could have been resolved by a needed library later
in the link order. This results in a loss of version information,
which can cause the program to bind to the wrong version at run
time.
This patch lets a dynamic definition override an earlier one if
the earlier one is from a not-needed library, so that we can
retain the version information from the binding to the needed
library. In order to do that, the tracking of needed/not-needed
had to be moved up to symbol resolution time, instead of during
Symbol_table::set_dynsym_indexes().
In cases where we still end up discarding version information,
I've added a warning.
For the original problem report and discussion, see:
gold/
* resolve.cc (Symbol_table::resolve): Rename tobinding to
orig_tobinding. Call set_is_needed() for objects that resolve
non-weak references.
(Symbol_table::should_override): Allow a dynamic definition to
override an earlier one in a not-needed library.
* symtab.cc (Symbol_table::set_dynsym_indexes): Remove separate
processing for as-needed symbols. Add warning when discarding
version informatin.
* testsuite/Makefile.am (weak_as_needed): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/weak_as_needed.sh: New test script.
* testsuite/weak_as_needed_a.c: New source file.
* testsuite/weak_as_needed_b.c: New source file.
* testsuite/weak_as_needed_b.script: New version script.
* testsuite/weak_as_needed_c.c: New source file.
* testsuite/weak_as_needed_c.script: New version script.
Shuffle code in `_bfd_mips_post_process_headers' so that the setting of
the EI_ABIVERSION ELF file header field is complete before calling
`_bfd_elf_post_process_headers'. This used to be the case, but was
changed with commit 351cdf24d223 ("[MIPS] Implement O32 FPXX, FP64 and
FP64A ABI extensions") for no reason.
MIPS/BFD: Use enumeration constants for EI_ABIVERSION
Define enumeration constants based on generated `libc-abis.h' from GNU
libc, adding a MIPS_ prefix as these are port-specific. Use them to
replace magic numbers stored in the EI_ABIVERSION field of the ELF file
header.
bfd/
* elfxx-mips.c (MIPS_LIBC_ABI_DEFAULT, MIPS_LIBC_ABI_MIPS_PLT)
(MIPS_LIBC_ABI_UNIQUE, MIPS_LIBC_ABI_MIPS_O32_FP64)
(MIPS_LIBC_ABI_MAX): New enumeration constants.
(_bfd_mips_post_process_headers): Use them in place of magic
numbers.
Pedro Alves [Thu, 21 Jun 2018 16:09:31 +0000 (17:09 +0100)]
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
Alan Modra [Wed, 20 Jun 2018 04:46:52 +0000 (14:16 +0930)]
Regen doc/Makefile.in
Also make the automake strictness "foreign". My regeneration of the
three doc/Makefile.in files already had --foreign in the automake
invocation, so this just makes it explicit.
Richard Bunt [Thu, 21 Jun 2018 13:09:34 +0000 (14:09 +0100)]
Enable hardware watchpoints on attach for aarch64
This commit fixes a bug whereby hardware watchpoints are not used on
aarch64 when attaching to a target. The fix adds an aarch64 specialization
of post_attach which records the number of available hardware debug registers
using aarch64_linux_get_debug_reg_capacity. This implementation mirrors that
of aarch64_linux_child_post_startup_inferior which successfully enables the
use of hardware watchpoints when launching the target under the debugger.
gdb/ChangeLog:
* aarch64-linux-nat.c (post_attach): New.
(aarch64_linux_nat_target::post_attach): Override post_attach to
record the number of hardware debug registers.
gdb/testsuite/ChangeLog:
* gdb.base/watchpoint-hw-attach.c: New test.
* gdb.base/watchpoint-hw-attach.exp: New file.
Alan Hayward [Thu, 21 Jun 2018 08:37:58 +0000 (09:37 +0100)]
Use offsets instead of addresses in ELF_SECTION_IN_SEGMENT for non SHT_NOBITS
For sections that are not SHT_NOBITS, use sh_offset and p_offset instead of
sh_addr and p_vaddr when calculating if a section fits in a segment. Both
methods are valid when using the GNU linker.
include/
* elf/internal.h (ELF_SECTION_IN_SEGMENT): Don’t check addresses
for non SHT_NOBITS.
Tom Tromey [Wed, 20 Jun 2018 21:35:04 +0000 (15:35 -0600)]
Fix a memory leak in py-param.c
Mark Wielaard pointed out this memory leak to me:
==17633== 775 bytes in 1 blocks are definitely lost in loss record 13,346 of 13,967
==17633== at 0x4C2DB6B: malloc (vg_replace_malloc.c:299)
==17633== by 0x6652B7: xmalloc (common-utils.c:45)
==17633== by 0xC4C889: xstrdup (xstrdup.c:34)
==17633== by 0x5A71FD: unicode_to_encoded_string(_object*, char const*) (py-utils.c:81)
==17633== by 0x5A73EB: python_string_to_host_string(_object*) (py-utils.c:158)
==17633== by 0x59CC6C: get_doc_string(_object*, _object*) (py-param.c:334)
==17633== by 0x59D2AA: parmpy_init(_object*, _object*, _object*) (py-param.c:728)
The bug here is that parmpy_init is written as though
add_setshow_generic takes ownership of its doc-string arguments.
However, it does not. This patch fixes the bug in a straightforward
way and also applies some missing constification to make the problem
more apparent.
Tested on x86-64 Fedora 26.
gdb/ChangeLog
2018-06-20 Tom Tromey <tom@tromey.com>
* python/py-param.c (add_setshow_generic): Make parameters const.
(parmpy_init): Update.
Simon Marchi [Wed, 20 Jun 2018 16:49:03 +0000 (12:49 -0400)]
Rename regcache_cooked_read_ftype and make a function_view
regcache_cooked_read_ftype can be converted to a function_view, which
allows us to use lambda functions and therefore avoid having to pass an
opaque pointer parameter.
Adjusting the fallouts showed that the "const regcache &" passed to the
readonly_detached_regcache constructor is cast to non-const in
do_cooked_read. I changed the constructor parameter to be non-const.
Finally, I renamed the typedef from regcache_cooked_read_ftype to
register_read_ftype, since there is nothing that forces us to use it
only for regcaches nor cooked registers.
gdb/ChangeLog:
* regcache.h (regcache_cooked_read_ftype): Rename to...
(register_read_ftype): ...this, change type to function_view.
(class reg_buffer) <save>: Remove src parameter.
(readonly_detached_regcache) <readonly_detached_regcache>: Make
parameter non-const in first overload. Remove src parameter in
second overload.
* regcache.c (do_cooked_read): Remove.
(readonly_detached_regcache::readonly_detached_regcache): Make
parameter non-const, adjust call to other constructor.
(reg_buffer::save): Remove src parameter.
* frame.c (do_frame_register_read): Remove.
(frame_save_as_regcache): Use lambda function.
* ppc-linux-tdep.c (ppu2spu_unwind_register): Change type of src
parameter to ppu2spu_data *.
(ppu2spu_sniffer): Use lambda function.
Simon Marchi [Wed, 20 Jun 2018 16:46:28 +0000 (12:46 -0400)]
testsuite: Fix cc-with-tweaks.sh being executed in the wrong shell
The cc-with-tweaks.sh script needs to be executed with bash. When
trying to run this:
make check RUNTESTFLAGS="--target_board=dwarf4-gdb-index" TESTS="gdb.base/return.exp"
I get:
gdb compile failed, /home/emaisin/src/binutils-gdb/gdb/contrib/cc-with-tweaks.sh: 174: /home/emaisin/src/binutils-gdb/gdb/contrib/cc-with-tweaks.sh: Bad substitution
The reason is that the board files execute cc-with-tweaks.sh using
/bin/sh, which points to dash on my machine. Remove the /bin/sh part
and let the shebang choose the right interpreter.
Simon Marchi [Wed, 20 Jun 2018 16:40:54 +0000 (12:40 -0400)]
Remove struct keyword in range-based for-loop
Fix this with gcc 6.3.0, and make the loop variable const while at it:
/home/simark/src/binutils-gdb/gdb/record-full.c: In member function 'virtual int record_full_target::insert_breakpoint(gdbarch*, bp_target_info*)':
/home/simark/src/binutils-gdb/gdb/record-full.c:1789:8: error: types may not be defined in a for-range-declaration [-Werror]
for (struct record_full_breakpoint &bp : record_full_breakpoints)
Ulrich Weigand [Wed, 20 Jun 2018 14:24:16 +0000 (16:24 +0200)]
Improve gdb.base/float128.exp failure message
If the "print large128" sub-test fails in a manner that typically
indicates internal overflow due to GDB being built without MPFR
support, explicitly state this in the failure message.
Renlin Li [Fri, 27 Apr 2018 09:48:18 +0000 (10:48 +0100)]
[BFD][AARCH64]Properly truncate no overflow checking relocation value for load/store immediate.
bfd/ChangeLog:
2018-06-20 Renlin Li <renlin.li@arm.com>
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Use PG_OFFSET
to resolve BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
ld/ChangeLog:
2018-06-20 Renlin Li <renlin.li@arm.com>
* testsuite/ld-aarch64/emit-relocs-115.d: Update test with new value.
* testsuite/ld-aarch64/emit-relocs-534.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-555.d: Likewise.
Nick Clifton [Wed, 20 Jun 2018 11:38:10 +0000 (12:38 +0100)]
Change the ARM assembler's ADR and ADRl pseudo-ops so that they will only set the bottom bit of imported thumb function symbols if the -mthumb-interwork option is active.
For more information see the email thread starting here:
https://www.sourceware.org/ml/binutils/2018-05/msg00348.html
PR 21458
* tc-arm.c (do_adr): Only set the bottom bit of an imported thumb
function symbol address if -mthumb-interwork is active.
(do_adrl): Likewise.
* doc/c-arm.texi: Update descriptions of the -mthumb-interwork
option and the ADR and ADRL pseudo-ops.
* NEWS: Mention the new behaviour of the ADR and ADRL pseudo-ops.
* testsuite/gas/arm/pr21458.d: Add -mthumb-interwork option to
assembler command line.
* testsuite/gas/arm/adr.d: Likewise.
* testsuite/gas/arm/adrl.d: Likewise.
Nick Clifton [Wed, 20 Jun 2018 09:43:00 +0000 (10:43 +0100)]
Stop objcopy from corrupting mach-o files.
PR 23299
* mach-o.c (cputype): New function.
(cpusubtype): New function.
(bfd_mach_o_bfd_print_private_data): New function. Dispalys the
values in the MACH-O file header.
(bfd_mach_o_bfd_copy_private_header_data): Copy the cputype and
cpusubtype fields from the input bfd's mach-o header to the output
bfd.
* mach-o-target.c (bfd_mach_o_bfd_print_private_bfd_data):
Redefine to bfd_mach_o_bfd_print_private_data.
* mach-o.h (bfd_mach_o_bfd_print_private_bfd_data): Prototype.
Cary Coutant [Wed, 20 Jun 2018 08:24:11 +0000 (01:24 -0700)]
Fix problem where gold does not create base version for executables.
gold/
PR gold/23268
* dynobj.cc (Versions::Versions): Change init for needs_base_version_.
(Versions::record_version): Add verdefs for both shared objects and
executables.
(Versions::add_def): Likewise for base version.
(Versions::add_need): Don't add base version for executables.
(Versions::version_index): Look up version for both shared objects and
executables.
* testsuite/Makefile.am (ver_test_14): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_14.script: New version script.
* testsuite/ver_test_14.sh: New test script.
Cary Coutant [Wed, 20 Jun 2018 01:57:28 +0000 (18:57 -0700)]
Replace thread config with automatic config using ax_pthread.m4.
The autotools library macro (AX_PTHREAD) is now used to detect if
pthreads is present and multi-threaded linking in gold is automatically
enabled if it is found. This enables multi-threaded gold on platforms
where pthreads is enabled via other methods than just -lpthread
(e.g., MinGW).
The addressable signed 32-bit range for n64 MIPS `.got.plt' references
is from 0xffffffff7fff8000 to 0x7fff7fff, due to how the composition of
an LUI and an LD instruction works for address calculation in the 64-bit
addressing mode, such as when CP0.Status.UX=1.
We currently have a range check in `mips_finish_exec_plt', however it is
not correct as it verifies that the `.got.plt' start address referred is
between 0xffffffff80000000 and 0x7fffffff. It is also implemented as an
assertion rather than a proper error message despite that the situation
can be triggered by user input. Additionally there is no check made for
individual `.got.plt' entries referred even though they can be out of
range while the `.got.plt' start address is not.
Fix all these problems and use the correct range for the check, limiting
it to n64 output files, and then issue a proper error message both in
`mips_finish_exec_plt' and in `_bfd_mips_elf_finish_dynamic_symbol',
suggesting the use of the `-Ttext-segment=...' option that will often
work and with the default linker scripts in particular. Add suitable
tests covering boundary cases.
bfd/
PR ld/22966
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Verify the
`.got.plt' entry referred is in range.
(mips_finish_exec_plt): Correct the range check for `.got.plt'
start. Replace the assertion used for that with a proper error
message.
ld/
PR ld/22966
* testsuite/ld-mips-elf/n64-plt-1.dd: New test.
* testsuite/ld-mips-elf/n64-plt-1.gd: New test.
* testsuite/ld-mips-elf/n64-plt-2.ed: New test.
* testsuite/ld-mips-elf/n64-plt-3.ed: New test.
* testsuite/ld-mips-elf/n64-plt-4.dd: New test.
* testsuite/ld-mips-elf/n64-plt-4.gd: New test.
* testsuite/ld-mips-elf/n64-plt-1.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-2.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-3.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-4.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt.s: New test source.
* testsuite/ld-mips-elf/n64-plt-lib.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
MIPS/LD/testsuite: XFAIL DT_TEXTREL map file warning test
Remove:
FAIL: DT_TEXTREL map file warning
introduced with commit 63c1f59d6655 ("readonly_dynrelocs"), coming from
the lack of a "dynamic relocation against `foo' in read-only section
`.rodata'" warning message produced.
The cause of the failure is that for sections which have dynamic
relocations attached the MIPS backend sets SHF_WRITE, in
`mips_elf_create_dynamic_relocation', yielding:
so the section is read/write and therefore there is nothing to warn
about.
This arrangement came from commit 7403cb6305f5 ("PATCH for N32 ABI"),
<https://sourceware.org/ml/binutils/1999-q2/msg00375.html>, i.e. for all
practical purposes it has been there since forever, and therefore it can
be considered a part of the ABI and the test case irrelevant for MIPS
targets.
We don't have a clean way to request UNSUPPORTED result, which would be
the most appropriate here, so just XFAIL the test instead.
ld/
* testsuite/ld-elf/shared.exp: XFAIL DT_TEXTREL map file warning
test for `mips*-*-*'.
Simon Marchi [Tue, 19 Jun 2018 20:54:48 +0000 (16:54 -0400)]
Bump to autoconf 2.69 and automake 1.15.1
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
Pedro Alves [Tue, 19 Jun 2018 17:16:40 +0000 (18:16 +0100)]
Silence -Wmaybe-uninitialized warning in minsyms.c:lookup_minimal_symbol_by_pc_section
Compiling with GCC 8.1 shows this warning:
gdb/minsyms.c: In function 'bound_minimal_symbol lookup_minimal_symbol_by_pc_section(CORE_ADDR, obj_section*, lookup_msym_prefer)':
gdb/minsyms.c:825:40: warning: 'want_type' may be used uninitialized in this function [-Wmaybe-uninitialized]
&& MSYMBOL_TYPE (&msymbol[hi]) != want_type
That warning is a false positive, because the switch that converts
enum lookup_msym_prefer values to enum enum minimal_symbol_type values
has a case for every lookup_msym_prefer enumerator:
switch (prefer)
{
case lookup_msym_prefer::TEXT:
want_type = mst_text;
break;
case lookup_msym_prefer::TRAMPOLINE:
want_type = mst_solib_trampoline;
break;
case lookup_msym_prefer::GNU_IFUNC:
want_type = mst_text_gnu_ifunc;
break;
}
The problem is that GCC assumes that enum variables may hold values
other than the named enumerators (like e.g., "lookup_msym_prefer
prefer = (lookup_msym_prefer) 10;").
Rework the code a bit, adding a gdb_assert to make it explicit to the
compiler that want_type is initialized in all normal-return paths.
gdb/ChangeLog:
2018-06-19 Pedro Alves <palves@redhat.com>
* minsyms.c (msym_prefer_to_msym_type): New, factored out from ...
(lookup_minimal_symbol_by_pc_section): ... here with
gdb_assert_not_reached added.
Currently, gdb.gdb/selftest.exp fails if you build GDB with
optimization (-O2, etc.).
The reason is that after setting a breakpoint in captured_main, we
stop at:
...
Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492
...
while selftest_setup expects a stop at captured_main.
Here, captured_main_1 has been inlined into captured_main, and
captured_main has been inlined into gdb_main:
Indeed, the two inlined functions show up in the backtrace:
...
(gdb) bt
#0 captured_main_1 (context=<optimized out>) at main.c:492
#1 captured_main (data=<optimized out>) at main.c:1147
#2 gdb_main (args=args@entry=0x7fffffffdb80) at main.c:1173
#3 0x000000000040fea5 in main (argc=<optimized out>, argv=<optimized out>)
at gdb.c:32
...
We're now stopping at captured_main_1 because commit ddfe970e6bec
("Don't elide all inlined frames") makes GDB present a stop at the
innermost inlined frame if the program stopped by a user breakpoint.
Now, the selftest.exp testcase explicitly asks to stop at
"captured_main", not "captured_main_1", so I'm thinking that it's
GDB'S behavior that should be improved. That is what this commit
does, by only showing a stop at an inline frame if the user breakpoint
was set in that frame's block.
Before this commit:
(top-gdb) b captured_main
Breakpoint 1 at 0x792f99: file src/gdb/main.c, line 492.
(top-gdb) r
Starting program: build/gdb/gdb
(top-gdb) b captured_main_1
Breakpoint 2 at 0x791339: file src/gdb/main.c, line 492.
(top-gdb) r
Starting program: build/gdb/gdb
Breakpoint 2, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492
492 lim_at_start = (char *) sbrk (0);
(top-gdb)
Note that both captured_main and captured_main_1 resolved to the same
address, 0x791339. That is necessary to trigger the issue in
question. The gdb.base/inline-break.exp testcase currently does not
exercise that, but the new test added by this commit does. That new
test fails without the GDB fix and passes with the fix. No
regressions on x86-64 GNU/Linux.
While at it, the THIS_PC comparison in stopped_by_user_bp_inline_frame
is basically a nop, so just remove it -- if a software or hardware
breakpoint explains the stop, then it must be that it was installed at
the current PC.
gdb/ChangeLog:
2018-06-19 Pedro Alves <palves@redhat.com>
* inline-frame.c (stopped_by_user_bp_inline_frame): Replace PC
parameter with a block parameter. Compare location's block symbol
with the frame's block instead of addresses.
(skip_inline_frames): Pass the current block instead of the
frame's address. Break out as soon as we determine the frame
should not be skipped.
gdb/testsuite/ChangeLog:
2018-06-19 Pedro Alves <palves@redhat.com>
Andreas Schwab [Mon, 18 Jun 2018 08:29:31 +0000 (10:29 +0200)]
readelf: Handle more RISC-V relocations
* readelf.c (is_16bit_abs_reloc): Handle R_RISCV_SET16.
(is_8bit_abs_reloc): New function.
(is_6bit_abs_reloc): New function.
(is_6bit_inplace_sub_reloc): New function.
(apply_relocations): Use them. Handle 6-bit relocations.
projects / thirdparty / binutils-gdb.git / log
