[people/ms/u-boot.git] / include / configs / am3517_crane.h

/*
 * am3517_crane.h - Default configuration for AM3517 CraneBoard.
 *
 * Author: Srinath.R <srinath@mistralsolutions.com>
 *
 * Based on include/configs/am3517evm.h
 *
 * Copyright (C) 2011 Mistral Solutions pvt Ltd
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap.h>

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1
#define CONFIG_REVISION_TAG		1

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
						/* initial data */
/*
 * DDR related
 */
#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3	/* UART3 on CRANEBOARD */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}

/*
 * USB configuration
 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
 * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
 */
#define CONFIG_USB_AM35X		1
#define CONFIG_USB_MUSB_HCD			1

#ifdef CONFIG_USB_AM35X

#ifdef CONFIG_USB_MUSB_HCD

#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_PREBOOT "usb start"
#endif /* CONFIG_USB_KEYBOARD */

#endif /* CONFIG_USB_MUSB_HCD */

#ifdef CONFIG_USB_MUSB_UDC
/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"AM3517CRANE"
#endif /* CONFIG_USB_MUSB_UDC */

#endif /* CONFIG_USB_AM35X */

#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE	1

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access */
							/* nand at CS0 */

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
							/* NAND devices */

#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV		"nand0"
/* start of jffs2 partition */
#define CONFIG_JFFS2_PART_OFFSET	0x680000
#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* sz of jffs2 part */

/* Environment information */

#define CONFIG_BOOTFILE		"uImage"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"console=ttyS2,115200n8\0" \
	"mmcdev=0\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"root=/dev/mmcblk0p2 rw " \
		"rootfstype=ext3 rootwait\0" \
	"nandargs=setenv bootargs console=${console} " \
		"root=/dev/mtdblock4 rw " \
		"rootfstype=jffs2\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 280000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run nandboot; " \
			"fi; " \
		"fi; " \
	"else run nandboot; fi"

#define CONFIG_AUTO_COMPLETE	1
/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS		32	/* max number of command */
						/* args */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
								/* address */

/*
 * AM3517 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		OMAP34XX_GPT2
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */
#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
						/* on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

#define CONFIG_SYS_FLASH_BASE		NAND_BASE

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

#define CONFIG_NAND_OMAP_GPMC

#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB sector */
#define CONFIG_ENV_OFFSET		0x260000
#define CONFIG_ENV_ADDR			0x260000

/*-----------------------------------------------------------------------
 * CFI FLASH driver setup
 */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)

/* Flash banks JFFS2 should use */
#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
					CONFIG_SYS_MAX_NAND_DEVICE)
#define CONFIG_SYS_JFFS2_MEM_NAND
/* use flash_info[2] */
#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
#define CONFIG_SYS_JFFS2_NUM_BANKS	1

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE		0x40200800
#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
					 CONFIG_SPL_TEXT_BASE)

#define CONFIG_SPL_BSS_START_ADDR	0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */

#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"

#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC

/* NAND boot config */
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
						10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000

/*
 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 * 64 bytes before this address should be set aside for u-boot.img's
 * header. That is 0x800FFFC0--0x80100000 should not be used for any
 * other needs.
 */
#define CONFIG_SYS_TEXT_BASE		0x80100000
#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

#endif /* __CONFIG_H */
Commit	Line	Data
915162da S	1	/*
	2	* am3517_crane.h - Default configuration for AM3517 CraneBoard.
	3	*
	4	* Author: Srinath.R <srinath@mistralsolutions.com>
	5	*
	6	* Based on include/configs/am3517evm.h
	7	*
	8	* Copyright (C) 2011 Mistral Solutions pvt Ltd
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
915162da S	11	*/
	12
	13	#ifndef __CONFIG_H
	14	#define __CONFIG_H
	15
	16	/*
	17	* High Level Configuration Options
	18	*/
915162da S	19
915162da S	20	#include <asm/arch/cpu.h> /* get chip and board defs */
987ec585	21	#include <asm/arch/omap.h>
915162da	22
915162da S	23	/* Clock Defines */
	24	#define V_OSCK 26000000 /* Clock output from T2 */
	25	#define V_SCLK (V_OSCK >> 1)
	26
915162da S	27	#define CONFIG_MISC_INIT_R
	28
	29	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	30	#define CONFIG_SETUP_MEMORY_TAGS 1
	31	#define CONFIG_INITRD_TAG 1
	32	#define CONFIG_REVISION_TAG 1
	33
	34	/*
	35	* Size of malloc() pool
	36	*/
	37	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
	38	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
	39	/* initial data */
	40	/*
	41	* DDR related
	42	*/
915162da S	43	#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
	44
	45	/*
	46	* Hardware drivers
	47	*/
	48
	49	/*
	50	* NS16550 Configuration
	51	*/
	52	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	53
915162da S	54	#define CONFIG_SYS_NS16550_SERIAL
	55	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	56	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	57
	58	/*
	59	* select serial console configuration
	60	*/
	61	#define CONFIG_CONS_INDEX 3
	62	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	63	#define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */
	64
	65	/* allow to overwrite serial and ethaddr */
	66	#define CONFIG_ENV_OVERWRITE
915162da S	67	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
915162da S	68	115200}
915162da S	69
	70	/*
	71	* USB configuration
95de1e2f PK	72	* Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
95de1e2f PK	73	* Enable CONFIG_USB_MUSB_UDC for Device functionalities.
915162da S	74	*/
915162da S	75	#define CONFIG_USB_AM35X 1
95de1e2f	76	#define CONFIG_USB_MUSB_HCD 1
915162da S	77
	78	#ifdef CONFIG_USB_AM35X
	79
95de1e2f	80	#ifdef CONFIG_USB_MUSB_HCD
915162da	81
915162da	82	#ifdef CONFIG_USB_KEYBOARD
915162da S	83	#define CONFIG_PREBOOT "usb start"
	84	#endif /* CONFIG_USB_KEYBOARD */
	85
95de1e2f	86	#endif /* CONFIG_USB_MUSB_HCD */
915162da	87
95de1e2f	88	#ifdef CONFIG_USB_MUSB_UDC
915162da S	89	/* USB device configuration */
	90	#define CONFIG_USB_DEVICE 1
	91	#define CONFIG_USB_TTY 1
915162da S	92	/* Change these to suit your needs */
	93	#define CONFIG_USBD_VENDORID 0x0451
	94	#define CONFIG_USBD_PRODUCTID 0x5678
	95	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	96	#define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE"
95de1e2f	97	#endif /* CONFIG_USB_MUSB_UDC */
915162da S	98
	99	#endif /* CONFIG_USB_AM35X */
	100
6789e84e HS	101	#define CONFIG_SYS_I2C
	102	#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
	103	#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
915162da	104
915162da S	105	/*
	106	* Board NAND Info.
	107	*/
	108	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	109	/* to access nand */
	110	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	111	/* to access */
	112	/* nand at CS0 */
	113
	114	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
	115	/* NAND devices */
915162da S	116
	117	#define CONFIG_JFFS2_NAND
	118	/* nand device jffs2 lives on */
	119	#define CONFIG_JFFS2_DEV "nand0"
	120	/* start of jffs2 partition */
	121	#define CONFIG_JFFS2_PART_OFFSET 0x680000
	122	#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
	123
	124	/* Environment information */
915162da	125
b3f44c21	126	#define CONFIG_BOOTFILE "uImage"
915162da S	127
	128	#define CONFIG_EXTRA_ENV_SETTINGS \
	129	"loadaddr=0x82000000\0" \
	130	"console=ttyS2,115200n8\0" \
a5a8821c	131	"mmcdev=0\0" \
915162da S	132	"mmcargs=setenv bootargs console=${console} " \
	133	"root=/dev/mmcblk0p2 rw " \
	134	"rootfstype=ext3 rootwait\0" \
	135	"nandargs=setenv bootargs console=${console} " \
	136	"root=/dev/mtdblock4 rw " \
	137	"rootfstype=jffs2\0" \
a5a8821c	138	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
915162da S	139	"bootscript=echo Running bootscript from mmc ...; " \
915162da S	140	"source ${loadaddr}\0" \
a5a8821c	141	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
915162da S	142	"mmcboot=echo Booting from mmc ...; " \
	143	"run mmcargs; " \
	144	"bootm ${loadaddr}\0" \
	145	"nandboot=echo Booting from nand ...; " \
	146	"run nandargs; " \
	147	"nand read ${loadaddr} 280000 400000; " \
	148	"bootm ${loadaddr}\0" \
	149
	150	#define CONFIG_BOOTCOMMAND \
66968110	151	"mmc dev ${mmcdev}; if mmc rescan; then " \
915162da S	152	"if run loadbootscript; then " \
	153	"run bootscript; " \
	154	"else " \
	155	"if run loaduimage; then " \
	156	"run mmcboot; " \
	157	"else run nandboot; " \
	158	"fi; " \
	159	"fi; " \
	160	"else run nandboot; fi"
	161
	162	#define CONFIG_AUTO_COMPLETE 1
	163	/*
	164	* Miscellaneous configurable options
	165	*/
915162da	166	#define CONFIG_SYS_LONGHELP /* undef to save memory */
915162da	167	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
915162da S	168	#define CONFIG_SYS_MAXARGS 32 /* max number of command */
915162da S	169	/* args */
915162da S	170	/* memtest works on */
	171	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	172	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	173	0x01F00000) /* 31MB */
	174
	175	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
	176	/* address */
	177
	178	/*
	179	* AM3517 has 12 GP timers, they can be driven by the system clock
	180	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	181	* This rate is divided by a local divisor.
	182	*/
	183	#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
	184	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
915162da	185
915162da S	186	/*-----------------------------------------------------------------------
	187	* Physical Memory Map
	188	*/
	189	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	190	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
915162da S	191	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
915162da S	192
915162da S	193	/*-----------------------------------------------------------------------
	194	* FLASH and environment organization
	195	*/
	196
	197	/* ** PISMO SUPPORT * */
915162da S	198	#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
	199	/* on one chip */
	200	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
	201	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
	202
222a3113	203	#define CONFIG_SYS_FLASH_BASE NAND_BASE
915162da S	204
	205	/* Monitor at start of flash */
	206	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	207
	208	#define CONFIG_NAND_OMAP_GPMC
915162da	209
6cbec7b3	210	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */
7672d9d5 AF	211	#define CONFIG_ENV_OFFSET 0x260000
7672d9d5 AF	212	#define CONFIG_ENV_ADDR 0x260000
915162da S	213
	214	/*-----------------------------------------------------------------------
	215	* CFI FLASH driver setup
	216	*/
	217	/* timeout values are in ticks */
	218	#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
	219	#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
	220
	221	/* Flash banks JFFS2 should use */
	222	#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
	223	CONFIG_SYS_MAX_NAND_DEVICE)
	224	#define CONFIG_SYS_JFFS2_MEM_NAND
	225	/* use flash_info[2] */
	226	#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
	227	#define CONFIG_SYS_JFFS2_NUM_BANKS 1
	228
915162da S	229	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	230	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	231	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	232	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	233	CONFIG_SYS_INIT_RAM_SIZE - \
	234	GENERATED_GBL_DATA_SIZE)
d067cc46 TR	235
d067cc46 TR	236	/* Defines for SPL */
47f7bcae	237	#define CONFIG_SPL_FRAMEWORK
d067cc46 TR	238	#define CONFIG_SPL_NAND_SIMPLE
d067cc46 TR	239	#define CONFIG_SPL_TEXT_BASE 0x40200800
fa2f81b0 TR	240	#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
fa2f81b0 TR	241	CONFIG_SPL_TEXT_BASE)
d067cc46 TR	242
	243	#define CONFIG_SPL_BSS_START_ADDR 0x80000000
	244	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
	245
e2ccdf89	246	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
205b4f33	247	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
d067cc46	248
6f2f01b9 SW	249	#define CONFIG_SPL_NAND_BASE
	250	#define CONFIG_SPL_NAND_DRIVERS
	251	#define CONFIG_SPL_NAND_ECC
d067cc46 TR	252
d067cc46 TR	253	/* NAND boot config */
55f1b39f	254	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
d067cc46 TR	255	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	256	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	257	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	258	#define CONFIG_SYS_NAND_OOBSIZE 64
	259	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	260	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	261	#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
	262	10, 11, 12, 13}
	263	#define CONFIG_SYS_NAND_ECCSIZE 512
	264	#define CONFIG_SYS_NAND_ECCBYTES 3
3f719069	265	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
d067cc46 TR	266	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	267	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	268
	269	/*
	270	* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
	271	* 64 bytes before this address should be set aside for u-boot.img's
	272	* header. That is 0x800FFFC0--0x80100000 should not be used for any
	273	* other needs.
	274	*/
	275	#define CONFIG_SYS_TEXT_BASE 0x80100000
	276	#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
	277	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	278
915162da	279	#endif /* __CONFIG_H */