[people/ms/u-boot.git] / include / configs / ls1021atwr.h

/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_ARMV7_PSCI_1_0

#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR

#define CONFIG_SYS_FSL_CLK

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_DEEP_SLEEP

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 16 * 1024 * 1024)

#define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE

#define CONFIG_SYS_CLK_FREQ		100000000
#define CONFIG_DDR_CLK_FREQ		100000000

#define DDR_SDRAM_CFG			0x470c0008
#define DDR_CS0_BNDS			0x008000bf
#define DDR_CS0_CONFIG			0x80014302
#define DDR_TIMING_CFG_0		0x50550004
#define DDR_TIMING_CFG_1		0xbcb38c56
#define DDR_TIMING_CFG_2		0x0040d120
#define DDR_TIMING_CFG_3		0x010e1000
#define DDR_TIMING_CFG_4		0x00000001
#define DDR_TIMING_CFG_5		0x03401400
#define DDR_SDRAM_CFG_2			0x00401010
#define DDR_SDRAM_MODE			0x00061c60
#define DDR_SDRAM_MODE_2		0x00180000
#define DDR_SDRAM_INTERVAL		0x18600618
#define DDR_DDR_WRLVL_CNTL		0x8655f605
#define DDR_DDR_WRLVL_CNTL_2		0x05060607
#define DDR_DDR_WRLVL_CNTL_3		0x05050505
#define DDR_DDR_CDR1			0x80040000
#define DDR_DDR_CDR2			0x00000001
#define DDR_SDRAM_CLK_CNTL		0x02000000
#define DDR_DDR_ZQ_CNTL			0x89080600
#define DDR_CS0_CONFIG_2		0
#define DDR_SDRAM_CFG_MEM_EN		0x80000000
#define SDRAM_CFG2_D_INIT		0x00000010
#define DDR_CDR2_VREF_TRAIN_EN		0x00000080
#define SDRAM_CFG2_FRC_SR		0x80000000
#define SDRAM_CFG_BI			0x00000001

#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021atwr/ls102xa_pbi.cfg
#endif

#ifdef CONFIG_SD_BOOT
#ifdef CONFIG_SD_BOOT_QSPI
#define CONFIG_SYS_FSL_PBL_RCW	\
	board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
#else
#define CONFIG_SYS_FSL_PBL_RCW	\
	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
#endif

#ifdef CONFIG_SECURE_BOOT
/*
 * HDR would be appended at end of image and copied to DDR along
 * with U-Boot image.
 */
#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
#endif /* ifdef CONFIG_SECURE_BOOT */

#define CONFIG_SPL_TEXT_BASE		0x10000000
#define CONFIG_SPL_MAX_SIZE		0x1a000
#define CONFIG_SPL_STACK		0x1001d000
#define CONFIG_SPL_PAD_TO		0x1c000

#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
		CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
#define CONFIG_SPL_BSS_START_ADDR	0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000

#ifdef CONFIG_U_BOOT_HDR_SIZE
/*
 * HDR would be appended at end of image and copied to DDR along
 * with U-Boot image. Here u-boot max. size is 512K. So if binary
 * size increases then increase this size in case of secure boot as
 * it uses raw u-boot image instead of fit image.
 */
#define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
#else
#define CONFIG_SYS_MONITOR_LEN		0x100000
#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
#endif

#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			0x80000000
#define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)

#define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE

#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
	!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#endif

/*
 * IFC Definitions
 */
#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE		0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE

#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
				CSPR_PORT_SIZE_16 | \
				CSPR_MSEL_NOR | \
				CSPR_V)
#define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)

/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
					CSOR_NOR_TRHZ_80)
#define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
					FTIM0_NOR_TEADC(0x5) | \
					FTIM0_NOR_TAVDS(0x0) | \
					FTIM0_NOR_TEAHC(0x5))
#define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
					FTIM1_NOR_TRAD_NOR(0x1A) | \
					FTIM1_NOR_TSEQRAD_NOR(0x13))
#define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
					FTIM2_NOR_TCH(0x4) | \
					FTIM2_NOR_TWP(0x1c) | \
					FTIM2_NOR_TWPH(0x0e))
#define CONFIG_SYS_NOR_FTIM3		0

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }

#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_SYS_WRITE_SWAPPED_DATA
#endif

/* CPLD */

#define CONFIG_SYS_CPLD_BASE	0x7fb00000
#define CPLD_BASE_PHYS		CONFIG_SYS_CPLD_BASE

#define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
					CSPR_PORT_SIZE_8 | \
					CSPR_MSEL_GPCM | \
					CSPR_V)
#define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
#define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
					CSOR_NOR_NOR_MODE_AVD_NOR | \
					CSOR_NOR_TRHZ_80)

/* CPLD Timing parameters for IFC GPCM */
#define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xf) | \
					FTIM0_GPCM_TEADC(0xf) | \
					FTIM0_GPCM_TEAHC(0xf))
#define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
					FTIM1_GPCM_TRAD(0x3f))
#define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
					FTIM2_GPCM_TCH(0xf) | \
					FTIM2_GPCM_TWP(0xff))
#define CONFIG_SYS_FPGA_FTIM3           0x0
#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_FPGA_CSPR_EXT
#define CONFIG_SYS_CSPR1		CONFIG_SYS_FPGA_CSPR
#define CONFIG_SYS_AMASK1		CONFIG_SYS_FPGA_AMASK
#define CONFIG_SYS_CSOR1		CONFIG_SYS_FPGA_CSOR
#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_FPGA_FTIM0
#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_FPGA_FTIM1
#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_FPGA_FTIM2
#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_FPGA_FTIM3

/*
 * Serial Port
 */
#ifdef CONFIG_LPUART
#define CONFIG_LPUART_32B_REG
#else
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#endif
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
#endif

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */

/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM		1
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

/*
 * MMC
 */
#define CONFIG_FSL_ESDHC

/* SPI */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
/* QSPI */
#define QSPI0_AMBA_BASE			0x40000000
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2

/* DSPI */
#endif

/* DM SPI */
#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
#define CONFIG_DM_SPI_FLASH
#endif

/*
 * Video
 */
#ifdef CONFIG_VIDEO_FSL_DCU_FB
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO

#define CONFIG_FSL_DCU_SII9022A
#define CONFIG_SYS_I2C_DVI_BUS_NUM	1
#define CONFIG_SYS_I2C_DVI_ADDR		0x39
#endif

/*
 * eTSEC
 */
#define CONFIG_TSEC_ENET

#ifdef CONFIG_TSEC_ENET
#define CONFIG_MII
#define CONFIG_MII_DEFAULT_TSEC		1
#define CONFIG_TSEC1			1
#define CONFIG_TSEC1_NAME		"eTSEC1"
#define CONFIG_TSEC2			1
#define CONFIG_TSEC2_NAME		"eTSEC2"
#define CONFIG_TSEC3			1
#define CONFIG_TSEC3_NAME		"eTSEC3"

#define TSEC1_PHY_ADDR			2
#define TSEC2_PHY_ADDR			0
#define TSEC3_PHY_ADDR			1

#define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC3_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)

#define TSEC1_PHYIDX			0
#define TSEC2_PHYIDX			0
#define TSEC3_PHYIDX			0

#define CONFIG_ETHPRIME			"eTSEC1"

#define CONFIG_PHY_ATHEROS

#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
#endif

/* PCIe */
#define CONFIG_PCIE1		/* PCIE controller 1 */
#define CONFIG_PCIE2		/* PCIE controller 2 */

#ifdef CONFIG_PCI
#define CONFIG_PCI_SCAN_SHOW
#endif

#define CONFIG_CMDLINE_TAG

#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR		0x01ee0200
#define COUNTER_FREQUENCY		12500000

#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE		256

#define CONFIG_FSL_DEVICE_DISABLE

#include <config_distro_defaults.h>
#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0)
#include <config_distro_bootcmd.h>

#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS       \
	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
	"initrd_high=0xffffffff\0"      \
	"fdt_high=0xffffffff\0"		\
	"fdt_addr=0x64f00000\0"		\
	"kernel_addr=0x65000000\0"	\
	"scriptaddr=0x80000000\0"	\
	"scripthdraddr=0x80080000\0"	\
	"fdtheader_addr_r=0x80100000\0"	\
	"kernelheader_addr_r=0x80200000\0"	\
	"kernel_addr_r=0x81000000\0"	\
	"fdt_addr_r=0x90000000\0"	\
	"ramdisk_addr_r=0xa0000000\0"	\
	"load_addr=0xa0000000\0"	\
	"kernel_size=0x2800000\0"	\
	"kernel_addr_sd=0x8000\0"	\
	"kernel_size_sd=0x14000\0"	\
	BOOTENV				\
	"boot_scripts=ls1021atwr_boot.scr\0"	\
	"boot_script_hdr=hdr_ls1021atwr_bs.out\0"	\
		"scan_dev_for_boot_part="	\
			"part list ${devtype} ${devnum} devplist; "	\
			"env exists devplist || setenv devplist 1; "	\
			"for distro_bootpart in ${devplist}; do "	\
			"if fstype ${devtype} "				\
				"${devnum}:${distro_bootpart} "		\
				"bootfstype; then "			\
				"run scan_dev_for_boot; "		\
			"fi; "			\
		"done\0"			\
	"scan_dev_for_boot="				  \
		"echo Scanning ${devtype} "		  \
				"${devnum}:${distro_bootpart}...; "  \
		"for prefix in ${boot_prefixes}; do "	  \
			"run scan_dev_for_scripts; "	  \
		"done;"					  \
		"\0"					  \
	"boot_a_script="				  \
		"load ${devtype} ${devnum}:${distro_bootpart} "  \
			"${scriptaddr} ${prefix}${script}; "    \
		"env exists secureboot && load ${devtype} "     \
			"${devnum}:${distro_bootpart} "		\
			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
			"&& esbc_validate ${scripthdraddr};"    \
		"source ${scriptaddr}\0"	  \
	"installer=load mmc 0:2 $load_addr "	\
		"/flex_installer_arm32.itb; "		\
		"bootm $load_addr#ls1021atwr\0"	\
	"qspi_bootcmd=echo Trying load from qspi..;"	\
		"sf probe && sf read $load_addr "	\
		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
	"nor_bootcmd=echo Trying load from nor..;"	\
		"cp.b $kernel_addr $load_addr "		\
		"$kernel_size && bootm $load_addr#$board\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
	"initrd_high=0xffffffff\0"      \
	"fdt_high=0xffffffff\0"		\
	"fdt_addr=0x64f00000\0"		\
	"kernel_addr=0x61000000\0"	\
	"kernelheader_addr=0x60800000\0"	\
	"scriptaddr=0x80000000\0"	\
	"scripthdraddr=0x80080000\0"	\
	"fdtheader_addr_r=0x80100000\0"	\
	"kernelheader_addr_r=0x80200000\0"	\
	"kernel_addr_r=0x81000000\0"	\
	"kernelheader_size=0x40000\0"	\
	"fdt_addr_r=0x90000000\0"	\
	"ramdisk_addr_r=0xa0000000\0"	\
	"load_addr=0xa0000000\0"	\
	"kernel_size=0x2800000\0"	\
	"kernel_addr_sd=0x8000\0"	\
	"kernel_size_sd=0x14000\0"	\
	"kernelhdr_addr_sd=0x4000\0"		\
	"kernelhdr_size_sd=0x10\0"		\
	BOOTENV				\
	"boot_scripts=ls1021atwr_boot.scr\0"	\
	"boot_script_hdr=hdr_ls1021atwr_bs.out\0"	\
		"scan_dev_for_boot_part="	\
			"part list ${devtype} ${devnum} devplist; "	\
			"env exists devplist || setenv devplist 1; "	\
			"for distro_bootpart in ${devplist}; do "	\
			"if fstype ${devtype} "				\
				"${devnum}:${distro_bootpart} "		\
				"bootfstype; then "			\
				"run scan_dev_for_boot; "		\
			"fi; "			\
		"done\0"			\
	"scan_dev_for_boot="				  \
		"echo Scanning ${devtype} "		  \
				"${devnum}:${distro_bootpart}...; "  \
		"for prefix in ${boot_prefixes}; do "	  \
			"run scan_dev_for_scripts; "	  \
		"done;"					  \
		"\0"					  \
	"boot_a_script="				  \
		"load ${devtype} ${devnum}:${distro_bootpart} "  \
			"${scriptaddr} ${prefix}${script}; "    \
		"env exists secureboot && load ${devtype} "     \
			"${devnum}:${distro_bootpart} "		\
			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
			"&& esbc_validate ${scripthdraddr};"    \
		"source ${scriptaddr}\0"	  \
	"qspi_bootcmd=echo Trying load from qspi..;"	\
		"sf probe && sf read $load_addr "	\
		"$kernel_addr $kernel_size; env exists secureboot "	\
		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
		"bootm $load_addr#$board\0" \
	"nor_bootcmd=echo Trying load from nor..;"	\
		"cp.b $kernel_addr $load_addr "		\
		"$kernel_size; env exists secureboot "	\
		"&& cp.b $kernelheader_addr $kernelheader_addr_r "	\
		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
		"bootm $load_addr#$board\0"	\
	"sd_bootcmd=echo Trying load from SD ..;"       \
		"mmcinfo && mmc read $load_addr "	\
		"$kernel_addr_sd $kernel_size_sd && "	\
		"env exists secureboot && mmc read $kernelheader_addr_r "		\
		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
		" && esbc_validate ${kernelheader_addr_r};"	\
		"bootm $load_addr#$board\0"
#endif

#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd"	\
			   "env exists secureboot && esbc_halt"
#elif defined(CONFIG_SD_BOOT)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
			   "env exists secureboot && esbc_halt;"
#else
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"	\
			   "env exists secureboot && esbc_halt;"
#endif

/*
 * Miscellaneous configurable options
 */

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

#define CONFIG_SYS_LOAD_ADDR		0x82000000

#define CONFIG_LS102XA_STREAM_ID

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
#endif

#define CONFIG_SYS_QE_FW_ADDR     0x60940000

/*
 * Environment
 */
#define CONFIG_ENV_OVERWRITE

#if defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_OFFSET		0x300000
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_SIZE			0x20000
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		0x300000
#define CONFIG_ENV_SECT_SIZE		0x10000
#else
#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
#define CONFIG_ENV_SIZE			0x20000
#define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
#endif

#define CONFIG_MISC_INIT_R

#include <asm/fsl_secure_boot.h>
#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */

#endif
Commit	Line	Data
c8a7d9da WH	1	/*
	2	* Copyright 2014 Freescale Semiconductor, Inc.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
aeb901f2	10	#define CONFIG_ARMV7_PSCI_1_0
340848b1	11
3288628a HZ	12	#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
3288628a HZ	13
18fb0e3c	14	#define CONFIG_SYS_FSL_CLK
c8a7d9da	15
c8a7d9da	16	#define CONFIG_SKIP_LOWLEVEL_INIT
99e1bd42	17	#define CONFIG_DEEP_SLEEP
c8a7d9da WH	18
	19	/*
	20	* Size of malloc() pool
	21	*/
	22	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
	23
	24	#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
	25	#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
	26
c8a7d9da WH	27	#define CONFIG_SYS_CLK_FREQ 100000000
	28	#define CONFIG_DDR_CLK_FREQ 100000000
	29
a88cc3bd YS	30	#define DDR_SDRAM_CFG 0x470c0008
	31	#define DDR_CS0_BNDS 0x008000bf
	32	#define DDR_CS0_CONFIG 0x80014302
	33	#define DDR_TIMING_CFG_0 0x50550004
	34	#define DDR_TIMING_CFG_1 0xbcb38c56
	35	#define DDR_TIMING_CFG_2 0x0040d120
	36	#define DDR_TIMING_CFG_3 0x010e1000
	37	#define DDR_TIMING_CFG_4 0x00000001
	38	#define DDR_TIMING_CFG_5 0x03401400
	39	#define DDR_SDRAM_CFG_2 0x00401010
	40	#define DDR_SDRAM_MODE 0x00061c60
	41	#define DDR_SDRAM_MODE_2 0x00180000
	42	#define DDR_SDRAM_INTERVAL 0x18600618
	43	#define DDR_DDR_WRLVL_CNTL 0x8655f605
	44	#define DDR_DDR_WRLVL_CNTL_2 0x05060607
	45	#define DDR_DDR_WRLVL_CNTL_3 0x05050505
	46	#define DDR_DDR_CDR1 0x80040000
	47	#define DDR_DDR_CDR2 0x00000001
	48	#define DDR_SDRAM_CLK_CNTL 0x02000000
	49	#define DDR_DDR_ZQ_CNTL 0x89080600
	50	#define DDR_CS0_CONFIG_2 0
	51	#define DDR_SDRAM_CFG_MEM_EN 0x80000000
99e1bd42 TY	52	#define SDRAM_CFG2_D_INIT 0x00000010
	53	#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
	54	#define SDRAM_CFG2_FRC_SR 0x80000000
	55	#define SDRAM_CFG_BI 0x00000001
a88cc3bd	56
8415bb68 AW	57	#ifdef CONFIG_RAMBOOT_PBL
	58	#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
	59	#endif
	60
	61	#ifdef CONFIG_SD_BOOT
947cee11 AW	62	#ifdef CONFIG_SD_BOOT_QSPI
	63	#define CONFIG_SYS_FSL_PBL_RCW \
	64	board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
	65	#else
	66	#define CONFIG_SYS_FSL_PBL_RCW \
	67	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
	68	#endif
e7e720c2 SG	69
e7e720c2 SG	70	#ifdef CONFIG_SECURE_BOOT
e7e720c2 SG	71	/*
	72	* HDR would be appended at end of image and copied to DDR along
	73	* with U-Boot image.
	74	*/
693d4c9f	75	#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
e7e720c2	76	#endif /* ifdef CONFIG_SECURE_BOOT */
8415bb68 AW	77
	78	#define CONFIG_SPL_TEXT_BASE 0x10000000
	79	#define CONFIG_SPL_MAX_SIZE 0x1a000
	80	#define CONFIG_SPL_STACK 0x1001d000
	81	#define CONFIG_SPL_PAD_TO 0x1c000
8415bb68	82
99e1bd42 TY	83	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
99e1bd42 TY	84	CONFIG_SYS_MONITOR_LEN)
8415bb68 AW	85	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	86	#define CONFIG_SPL_BSS_START_ADDR 0x80100000
	87	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
e7e720c2 SG	88
	89	#ifdef CONFIG_U_BOOT_HDR_SIZE
	90	/*
	91	* HDR would be appended at end of image and copied to DDR along
	92	* with U-Boot image. Here u-boot max. size is 512K. So if binary
	93	* size increases then increase this size in case of secure boot as
	94	* it uses raw u-boot image instead of fit image.
	95	*/
9b6639fa	96	#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
e7e720c2	97	#else
9b6639fa	98	#define CONFIG_SYS_MONITOR_LEN 0x100000
e7e720c2	99	#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
8415bb68 AW	100	#endif
8415bb68 AW	101
c8a7d9da WH	102	#define CONFIG_NR_DRAM_BANKS 1
	103	#define PHYS_SDRAM 0x80000000
	104	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	105
	106	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
	107	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	108
4c59ab9c AW	109	#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
4c59ab9c AW	110	!defined(CONFIG_QSPI_BOOT)
eaa859e7	111	#define CONFIG_U_QE
5aa03ddd	112	#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
eaa859e7 ZQ	113	#endif
eaa859e7 ZQ	114
c8a7d9da WH	115	/*
	116	* IFC Definitions
	117	*/
947cee11	118	#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
c8a7d9da WH	119	#define CONFIG_FSL_IFC
	120	#define CONFIG_SYS_FLASH_BASE 0x60000000
	121	#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
	122
	123	#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
	124	#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \| \
	125	CSPR_PORT_SIZE_16 \| \
	126	CSPR_MSEL_NOR \| \
	127	CSPR_V)
	128	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
	129
	130	/* NOR Flash Timing Params */
	131	#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) \| \
	132	CSOR_NOR_TRHZ_80)
	133	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) \| \
	134	FTIM0_NOR_TEADC(0x5) \| \
	135	FTIM0_NOR_TAVDS(0x0) \| \
	136	FTIM0_NOR_TEAHC(0x5))
	137	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) \| \
	138	FTIM1_NOR_TRAD_NOR(0x1A) \| \
	139	FTIM1_NOR_TSEQRAD_NOR(0x13))
	140	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) \| \
	141	FTIM2_NOR_TCH(0x4) \| \
	142	FTIM2_NOR_TWP(0x1c) \| \
	143	FTIM2_NOR_TWPH(0x0e))
	144	#define CONFIG_SYS_NOR_FTIM3 0
	145
	146	#define CONFIG_FLASH_CFI_DRIVER
	147	#define CONFIG_SYS_FLASH_CFI
	148	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	149	#define CONFIG_SYS_FLASH_QUIET_TEST
	150	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
	151
	152	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
	153	#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
	154	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	155	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	156
	157	#define CONFIG_SYS_FLASH_EMPTY_INFO
	158	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
	159
	160	#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
272c5265	161	#define CONFIG_SYS_WRITE_SWAPPED_DATA
d612f0ab	162	#endif
c8a7d9da WH	163
	164	/* CPLD */
	165
	166	#define CONFIG_SYS_CPLD_BASE 0x7fb00000
	167	#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
	168
	169	#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
	170	#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) \| \
	171	CSPR_PORT_SIZE_8 \| \
	172	CSPR_MSEL_GPCM \| \
	173	CSPR_V)
	174	#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
	175	#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) \| \
	176	CSOR_NOR_NOR_MODE_AVD_NOR \| \
	177	CSOR_NOR_TRHZ_80)
	178
	179	/* CPLD Timing parameters for IFC GPCM */
	180	#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) \| \
	181	FTIM0_GPCM_TEADC(0xf) \| \
	182	FTIM0_GPCM_TEAHC(0xf))
	183	#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) \| \
	184	FTIM1_GPCM_TRAD(0x3f))
	185	#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) \| \
	186	FTIM2_GPCM_TCH(0xf) \| \
	187	FTIM2_GPCM_TWP(0xff))
	188	#define CONFIG_SYS_FPGA_FTIM3 0x0
	189	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
	190	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
	191	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
	192	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
	193	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
	194	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
	195	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
	196	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
	197	#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
	198	#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
	199	#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
	200	#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
	201	#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
	202	#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
	203	#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
	204	#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
	205
	206	/*
	207	* Serial Port
	208	*/
55d53ab4	209	#ifdef CONFIG_LPUART
55d53ab4 AW	210	#define CONFIG_LPUART_32B_REG
55d53ab4 AW	211	#else
c8a7d9da	212	#define CONFIG_CONS_INDEX 1
c8a7d9da	213	#define CONFIG_SYS_NS16550_SERIAL
f833cd62	214	#ifndef CONFIG_DM_SERIAL
c8a7d9da	215	#define CONFIG_SYS_NS16550_REG_SIZE 1
f833cd62	216	#endif
c8a7d9da	217	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
55d53ab4	218	#endif
c8a7d9da	219
c8a7d9da WH	220	/*
	221	* I2C
	222	*/
c8a7d9da WH	223	#define CONFIG_SYS_I2C
c8a7d9da WH	224	#define CONFIG_SYS_I2C_MXC
03544c66 AA	225	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	226	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	227	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
c8a7d9da	228
5175a288	229	/* EEPROM */
5175a288 AW	230	#define CONFIG_ID_EEPROM
	231	#define CONFIG_SYS_I2C_EEPROM_NXID
	232	#define CONFIG_SYS_EEPROM_BUS_NUM 1
	233	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
	234	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	235	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	236	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
5175a288	237
c8a7d9da WH	238	/*
	239	* MMC
	240	*/
c8a7d9da	241	#define CONFIG_FSL_ESDHC
c8a7d9da	242
9dd3d3c0	243	/* SPI */
947cee11	244	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
9dd3d3c0	245	/* QSPI */
d612f0ab AW	246	#define QSPI0_AMBA_BASE 0x40000000
	247	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	248	#define FSL_QSPI_FLASH_NUM 2
	249
03d1d568	250	/* DSPI */
03d1d568 YY	251	#endif
03d1d568 YY	252
9dd3d3c0 HW	253	/* DM SPI */
9dd3d3c0 HW	254	#if defined(CONFIG_FSL_DSPI) \|\| defined(CONFIG_FSL_QSPI)
9dd3d3c0 HW	255	#define CONFIG_DM_SPI_FLASH
9dd3d3c0 HW	256	#endif
d612f0ab	257
b4ecc8c6 WH	258	/*
	259	* Video
	260	*/
b215fb3f	261	#ifdef CONFIG_VIDEO_FSL_DCU_FB
b4ecc8c6 WH	262	#define CONFIG_VIDEO_LOGO
	263	#define CONFIG_VIDEO_BMP_LOGO
	264
	265	#define CONFIG_FSL_DCU_SII9022A
	266	#define CONFIG_SYS_I2C_DVI_BUS_NUM 1
	267	#define CONFIG_SYS_I2C_DVI_ADDR 0x39
	268	#endif
	269
c8a7d9da WH	270	/*
	271	* eTSEC
	272	*/
	273	#define CONFIG_TSEC_ENET
	274
	275	#ifdef CONFIG_TSEC_ENET
	276	#define CONFIG_MII
	277	#define CONFIG_MII_DEFAULT_TSEC 1
	278	#define CONFIG_TSEC1 1
	279	#define CONFIG_TSEC1_NAME "eTSEC1"
	280	#define CONFIG_TSEC2 1
	281	#define CONFIG_TSEC2_NAME "eTSEC2"
	282	#define CONFIG_TSEC3 1
	283	#define CONFIG_TSEC3_NAME "eTSEC3"
	284
	285	#define TSEC1_PHY_ADDR 2
	286	#define TSEC2_PHY_ADDR 0
	287	#define TSEC3_PHY_ADDR 1
	288
	289	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	290	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	291	#define TSEC3_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	292
	293	#define TSEC1_PHYIDX 0
	294	#define TSEC2_PHYIDX 0
	295	#define TSEC3_PHYIDX 0
	296
	297	#define CONFIG_ETHPRIME "eTSEC1"
	298
c8a7d9da WH	299	#define CONFIG_PHY_ATHEROS
	300
	301	#define CONFIG_HAS_ETH0
	302	#define CONFIG_HAS_ETH1
	303	#define CONFIG_HAS_ETH2
	304	#endif
	305
da419027	306	/* PCIe */
b38eaec5 RD	307	#define CONFIG_PCIE1 /* PCIE controller 1 */
b38eaec5 RD	308	#define CONFIG_PCIE2 /* PCIE controller 2 */
da419027	309
180b8688	310	#ifdef CONFIG_PCI
180b8688	311	#define CONFIG_PCI_SCAN_SHOW
180b8688 ML	312	#endif
180b8688 ML	313
c8a7d9da	314	#define CONFIG_CMDLINE_TAG
8415bb68	315
1a2826f6	316	#define CONFIG_PEN_ADDR_BIG_ENDIAN
435acd83	317	#define CONFIG_LAYERSCAPE_NS_ACCESS
1a2826f6	318	#define CONFIG_SMP_PEN_ADDR 0x01ee0200
e4916e85	319	#define COUNTER_FREQUENCY 12500000
1a2826f6	320
c8a7d9da	321	#define CONFIG_HWCONFIG
03c22449 ZZ	322	#define HWCONFIG_BUFFER_SIZE 256
	323
	324	#define CONFIG_FSL_DEVICE_DISABLE
c8a7d9da	325
a65d7408 AW	326	#include <config_distro_defaults.h>
	327	#define BOOT_TARGET_DEVICES(func) \
	328	func(MMC, mmc, 0) \
	329	func(USB, usb, 0)
	330	#include <config_distro_bootcmd.h>
c8a7d9da	331
55d53ab4 AW	332	#ifdef CONFIG_LPUART
	333	#define CONFIG_EXTRA_ENV_SETTINGS \
	334	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
7ff7166c	335	"initrd_high=0xffffffff\0" \
a65d7408 AW	336	"fdt_high=0xffffffff\0" \
	337	"fdt_addr=0x64f00000\0" \
	338	"kernel_addr=0x65000000\0" \
	339	"scriptaddr=0x80000000\0" \
b8ae6798	340	"scripthdraddr=0x80080000\0" \
a65d7408 AW	341	"fdtheader_addr_r=0x80100000\0" \
	342	"kernelheader_addr_r=0x80200000\0" \
	343	"kernel_addr_r=0x81000000\0" \
	344	"fdt_addr_r=0x90000000\0" \
	345	"ramdisk_addr_r=0xa0000000\0" \
	346	"load_addr=0xa0000000\0" \
	347	"kernel_size=0x2800000\0" \
397a173e SL	348	"kernel_addr_sd=0x8000\0" \
397a173e SL	349	"kernel_size_sd=0x14000\0" \
a65d7408 AW	350	BOOTENV \
a65d7408 AW	351	"boot_scripts=ls1021atwr_boot.scr\0" \
b8ae6798	352	"boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
a65d7408 AW	353	"scan_dev_for_boot_part=" \
	354	"part list ${devtype} ${devnum} devplist; " \
	355	"env exists devplist \|\| setenv devplist 1; " \
	356	"for distro_bootpart in ${devplist}; do " \
	357	"if fstype ${devtype} " \
	358	"${devnum}:${distro_bootpart} " \
	359	"bootfstype; then " \
	360	"run scan_dev_for_boot; " \
	361	"fi; " \
	362	"done\0" \
b8ae6798 SG	363	"scan_dev_for_boot=" \
	364	"echo Scanning ${devtype} " \
	365	"${devnum}:${distro_bootpart}...; " \
	366	"for prefix in ${boot_prefixes}; do " \
	367	"run scan_dev_for_scripts; " \
	368	"done;" \
	369	"\0" \
	370	"boot_a_script=" \
	371	"load ${devtype} ${devnum}:${distro_bootpart} " \
	372	"${scriptaddr} ${prefix}${script}; " \
	373	"env exists secureboot && load ${devtype} " \
	374	"${devnum}:${distro_bootpart} " \
	375	"${scripthdraddr} ${prefix}${boot_script_hdr} " \
	376	"&& esbc_validate ${scripthdraddr};" \
	377	"source ${scriptaddr}\0" \
a65d7408 AW	378	"installer=load mmc 0:2 $load_addr " \
	379	"/flex_installer_arm32.itb; " \
	380	"bootm $load_addr#ls1021atwr\0" \
	381	"qspi_bootcmd=echo Trying load from qspi..;" \
	382	"sf probe && sf read $load_addr " \
	383	"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
	384	"nor_bootcmd=echo Trying load from nor..;" \
	385	"cp.b $kernel_addr $load_addr " \
	386	"$kernel_size && bootm $load_addr#$board\0"
55d53ab4	387	#else
c8a7d9da WH	388	#define CONFIG_EXTRA_ENV_SETTINGS \
c8a7d9da WH	389	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
7ff7166c	390	"initrd_high=0xffffffff\0" \
a65d7408 AW	391	"fdt_high=0xffffffff\0" \
a65d7408 AW	392	"fdt_addr=0x64f00000\0" \
9b457cc6 VPB	393	"kernel_addr=0x61000000\0" \
9b457cc6 VPB	394	"kernelheader_addr=0x60800000\0" \
a65d7408	395	"scriptaddr=0x80000000\0" \
b8ae6798	396	"scripthdraddr=0x80080000\0" \
a65d7408 AW	397	"fdtheader_addr_r=0x80100000\0" \
	398	"kernelheader_addr_r=0x80200000\0" \
	399	"kernel_addr_r=0x81000000\0" \
9b457cc6	400	"kernelheader_size=0x40000\0" \
a65d7408 AW	401	"fdt_addr_r=0x90000000\0" \
	402	"ramdisk_addr_r=0xa0000000\0" \
	403	"load_addr=0xa0000000\0" \
	404	"kernel_size=0x2800000\0" \
9b457cc6 VPB	405	"kernel_addr_sd=0x8000\0" \
	406	"kernel_size_sd=0x14000\0" \
	407	"kernelhdr_addr_sd=0x4000\0" \
	408	"kernelhdr_size_sd=0x10\0" \
a65d7408 AW	409	BOOTENV \
a65d7408 AW	410	"boot_scripts=ls1021atwr_boot.scr\0" \
b8ae6798	411	"boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
a65d7408 AW	412	"scan_dev_for_boot_part=" \
	413	"part list ${devtype} ${devnum} devplist; " \
	414	"env exists devplist \|\| setenv devplist 1; " \
	415	"for distro_bootpart in ${devplist}; do " \
	416	"if fstype ${devtype} " \
	417	"${devnum}:${distro_bootpart} " \
	418	"bootfstype; then " \
	419	"run scan_dev_for_boot; " \
	420	"fi; " \
	421	"done\0" \
b8ae6798 SG	422	"scan_dev_for_boot=" \
	423	"echo Scanning ${devtype} " \
	424	"${devnum}:${distro_bootpart}...; " \
	425	"for prefix in ${boot_prefixes}; do " \
	426	"run scan_dev_for_scripts; " \
	427	"done;" \
	428	"\0" \
	429	"boot_a_script=" \
	430	"load ${devtype} ${devnum}:${distro_bootpart} " \
	431	"${scriptaddr} ${prefix}${script}; " \
	432	"env exists secureboot && load ${devtype} " \
	433	"${devnum}:${distro_bootpart} " \
	434	"${scripthdraddr} ${prefix}${boot_script_hdr} " \
	435	"&& esbc_validate ${scripthdraddr};" \
	436	"source ${scriptaddr}\0" \
a65d7408 AW	437	"qspi_bootcmd=echo Trying load from qspi..;" \
a65d7408 AW	438	"sf probe && sf read $load_addr " \
9b457cc6 VPB	439	"$kernel_addr $kernel_size; env exists secureboot " \
	440	"&& sf read $kernelheader_addr_r $kernelheader_addr " \
	441	"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
	442	"bootm $load_addr#$board\0" \
a65d7408 AW	443	"nor_bootcmd=echo Trying load from nor..;" \
a65d7408 AW	444	"cp.b $kernel_addr $load_addr " \
9b457cc6 VPB	445	"$kernel_size; env exists secureboot " \
	446	"&& cp.b $kernelheader_addr $kernelheader_addr_r " \
	447	"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
	448	"bootm $load_addr#$board\0" \
397a173e SL	449	"sd_bootcmd=echo Trying load from SD ..;" \
	450	"mmcinfo && mmc read $load_addr " \
	451	"$kernel_addr_sd $kernel_size_sd && " \
9b457cc6 VPB	452	"env exists secureboot && mmc read $kernelheader_addr_r " \
	453	"$kernelhdr_addr_sd $kernelhdr_size_sd " \
	454	" && esbc_validate ${kernelheader_addr_r};" \
397a173e	455	"bootm $load_addr#$board\0"
55d53ab4	456	#endif
c8a7d9da	457
a65d7408 AW	458	#undef CONFIG_BOOTCOMMAND
a65d7408 AW	459	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
9b457cc6 VPB	460	#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd" \
9b457cc6 VPB	461	"env exists secureboot && esbc_halt"
397a173e	462	#elif defined(CONFIG_SD_BOOT)
9b457cc6 VPB	463	#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \
9b457cc6 VPB	464	"env exists secureboot && esbc_halt;"
a65d7408	465	#else
9b457cc6 VPB	466	#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;" \
9b457cc6 VPB	467	"env exists secureboot && esbc_halt;"
a65d7408 AW	468	#endif
a65d7408 AW	469
c8a7d9da WH	470	/*
	471	* Miscellaneous configurable options
	472	*/
c8a7d9da	473
c8a7d9da WH	474	#define CONFIG_SYS_MEMTEST_START 0x80000000
	475	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	476
	477	#define CONFIG_SYS_LOAD_ADDR 0x82000000
c8a7d9da	478
660673af XL	479	#define CONFIG_LS102XA_STREAM_ID
660673af XL	480
c8a7d9da WH	481	#define CONFIG_SYS_INIT_SP_OFFSET \
	482	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	483	#define CONFIG_SYS_INIT_SP_ADDR \
	484	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	485
8415bb68 AW	486	#ifdef CONFIG_SPL_BUILD
	487	#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
	488	#else
c8a7d9da	489	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
8415bb68	490	#endif
c8a7d9da	491
615bfce5	492	#define CONFIG_SYS_QE_FW_ADDR 0x60940000
eaa859e7	493
c8a7d9da WH	494	/*
	495	* Environment
	496	*/
	497	#define CONFIG_ENV_OVERWRITE
	498
8415bb68	499	#if defined(CONFIG_SD_BOOT)
615bfce5	500	#define CONFIG_ENV_OFFSET 0x300000
8415bb68 AW	501	#define CONFIG_SYS_MMC_ENV_DEV 0
8415bb68 AW	502	#define CONFIG_ENV_SIZE 0x20000
d612f0ab	503	#elif defined(CONFIG_QSPI_BOOT)
d612f0ab	504	#define CONFIG_ENV_SIZE 0x2000
615bfce5	505	#define CONFIG_ENV_OFFSET 0x300000
d612f0ab	506	#define CONFIG_ENV_SECT_SIZE 0x10000
8415bb68	507	#else
615bfce5	508	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
c8a7d9da WH	509	#define CONFIG_ENV_SIZE 0x20000
c8a7d9da WH	510	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
8415bb68	511	#endif
c8a7d9da	512
4ba4a095 RG	513	#define CONFIG_MISC_INIT_R
4ba4a095 RG	514
ef6c55a2	515	#include <asm/fsl_secure_boot.h>
cc7b8b9a	516	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
4ba4a095	517
c8a7d9da	518	#endif