[people/ms/u-boot.git] / include / configs / omap3_igep00x0.h

/*
 * Common configuration settings for IGEP technology based boards
 *
 * (C) Copyright 2012
 * ISEE 2007 SL, <www.iseebcn.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __IGEP00X0_H
#define __IGEP00X0_H

#ifdef CONFIG_BOOT_NAND
#define CONFIG_NAND
#endif

#define CONFIG_NR_DRAM_BANKS            2

#include <configs/ti_omap3_common.h>
#include <asm/mach-types.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

#define CONFIG_MISC_INIT_R

#define CONFIG_REVISION_TAG		1

/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
#define CONFIG_STATUS_LED
#define CONFIG_BOARD_SPECIFIC_LED
#define CONFIG_GPIO_LED
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
#define RED_LED_GPIO 27
#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define RED_LED_GPIO 16
#else
#error "status LED not defined for this machine."
#endif
#define RED_LED_DEV				0
#define STATUS_LED_BIT			RED_LED_GPIO
#define STATUS_LED_STATE		STATUS_LED_ON
#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
#define STATUS_LED_BOOT			RED_LED_DEV
#endif

/* GPIO banks */
#define CONFIG_OMAP3_GPIO_3		/* GPIO64 .. 95 is in GPIO bank 3 */
#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */

/* USB */
#define CONFIG_MUSB_UDC			1
#define CONFIG_USB_OMAP3		1
#define CONFIG_TWL4030_USB		1

/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1

/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"IGEP"

#define CONFIG_CMD_CACHE
#ifdef CONFIG_BOOT_ONENAND
#define CONFIG_CMD_ONENAND	/* ONENAND support		*/
#endif
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_NFS		/* NFS support			*/

/*#undef CONFIG_ENV_IS_NOWHERE*/

#define CONFIG_EXTRA_ENV_SETTINGS \
	"usbtty=cdc_acm\0" \
	"loadaddr=0x82000000\0" \
	"dtbaddr=0x81600000\0" \
	"bootdir=/boot\0" \
	"bootfile=zImage\0" \
	"usbtty=cdc_acm\0" \
	"console=ttyO2,115200n8\0" \
	"mpurate=auto\0" \
	"vram=12M\0" \
	"dvimode=1024x768MR-16@60\0" \
	"defaultdisplay=dvi\0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"nandroot=/dev/mtdblock4 rw\0" \
	"nandrootfstype=jffs2\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype}\0" \
	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
	"loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootz ${loadaddr}\0" \
	"mmcbootfdt=echo Booting with DT from mmc ...; " \
		"bootz ${loadaddr} - ${dtbaddr}\0" \
	"nandboot=echo Booting from onenand ...; " \
		"run nandargs; " \
		"onenand read ${loadaddr} 280000 400000; " \
		"bootz ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"echo SD/MMC found on device ${mmcdev};" \
		"if run loadbootenv; then " \
			"run importbootenv;" \
		"fi;" \
		"if test -n $uenvcmd; then " \
			"echo Running uenvcmd ...;" \
			"run uenvcmd;" \
		"fi;" \
		"if run loadzimage; then " \
			"if test -n $dtbfile; then " \
				"if run loadfdt; then " \
					"run mmcbootfdt;" \
				"fi;" \
			"fi;" \
			"run mmcboot;" \
		"fi;" \
	"fi;" \
	"run nandboot;" \

/*
 * FLASH and environment organization
 */

#ifdef CONFIG_BOOT_ONENAND
#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP

#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */

#define CONFIG_ENV_IS_IN_ONENAND	1
#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
#define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
#endif

#ifdef CONFIG_NAND
#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
#define CONFIG_ENV_IS_IN_NAND	        1
#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
#define CONFIG_ENV_ADDR			NAND_ENV_OFFSET
#endif

/*
 * SMSC911x Ethernet
 */
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE	0x2C000000
#endif /* (CONFIG_CMD_NET) */

/* OneNAND boot config */
#ifdef CONFIG_BOOT_ONENAND
#define CONFIG_SPL_ONENAND_SUPPORT
#define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
#define CONFIG_SYS_ONENAND_PAGE_SIZE	2048
#define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
#define CONFIG_SPL_ONENAND_LOAD_SIZE    \
	(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)

#endif

/* NAND boot config */
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
						10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
/* NAND: SPL falcon mode configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_CMD_SPL_NAND_OFS		0x240000
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
#endif
#endif

#endif /* __IGEP00X0_H */
Commit	Line	Data
8a3f6bb6	1	/*
dc7a9e64 EBS	2	* Common configuration settings for IGEP technology based boards
	3	*
	4	* (C) Copyright 2012
8a3f6bb6 EBS	5	* ISEE 2007 SL, <www.iseebcn.com>
8a3f6bb6 EBS	6	*
3765b3e7	7	* SPDX-License-Identifier: GPL-2.0+
8a3f6bb6 EBS	8	*/
8a3f6bb6 EBS	9
dc7a9e64 EBS	10	#ifndef __IGEP00X0_H
	11	#define __IGEP00X0_H
	12
e37e954e EBS	13	#ifdef CONFIG_BOOT_NAND
	14	#define CONFIG_NAND
	15	#endif
8a3f6bb6	16
e37e954e	17	#define CONFIG_NR_DRAM_BANKS 2
8a3f6bb6	18
e37e954e	19	#include <configs/ti_omap3_common.h>
aa127df6	20	#include <asm/mach-types.h>
8a3f6bb6 EBS	21
	22	/*
	23	* Display CPU and Board information
	24	*/
	25	#define CONFIG_DISPLAY_CPUINFO 1
	26	#define CONFIG_DISPLAY_BOARDINFO 1
	27
8a3f6bb6 EBS	28	#define CONFIG_MISC_INIT_R
8a3f6bb6 EBS	29
8a3f6bb6 EBS	30	#define CONFIG_REVISION_TAG 1
8a3f6bb6 EBS	31
50bb94c9 EBS	32	/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
50bb94c9 EBS	33	#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
f3b4bc45 EBS	34	#define CONFIG_STATUS_LED
	35	#define CONFIG_BOARD_SPECIFIC_LED
	36	#define CONFIG_GPIO_LED
	37	#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
	38	#define RED_LED_GPIO 27
50bb94c9	39	#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
f3b4bc45	40	#define RED_LED_GPIO 16
50bb94c9 EBS	41	#else
50bb94c9 EBS	42	#error "status LED not defined for this machine."
d9aacf41	43	#endif
f3b4bc45 EBS	44	#define RED_LED_DEV 0
	45	#define STATUS_LED_BIT RED_LED_GPIO
	46	#define STATUS_LED_STATE STATUS_LED_ON
	47	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
	48	#define STATUS_LED_BOOT RED_LED_DEV
50bb94c9	49	#endif
9d4f5421	50
dd1e8583 EBS	51	/* GPIO banks */
	52	#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
	53	#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
	54	#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
	55
8a3f6bb6 EBS	56	/* USB */
	57	#define CONFIG_MUSB_UDC 1
	58	#define CONFIG_USB_OMAP3 1
	59	#define CONFIG_TWL4030_USB 1
	60
	61	/* USB device configuration */
	62	#define CONFIG_USB_DEVICE 1
	63	#define CONFIG_USB_TTY 1
	64	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	65
	66	/* Change these to suit your needs */
	67	#define CONFIG_USBD_VENDORID 0x0451
	68	#define CONFIG_USBD_PRODUCTID 0x5678
	69	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	70	#define CONFIG_USBD_PRODUCT_NAME "IGEP"
	71
8a3f6bb6	72	#define CONFIG_CMD_CACHE
ca511cfb	73	#ifdef CONFIG_BOOT_ONENAND
8a3f6bb6	74	#define CONFIG_CMD_ONENAND /* ONENAND support */
ca511cfb	75	#endif
d9aacf41 EBS	76	#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) \|\| \
d9aacf41 EBS	77	(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
8a3f6bb6	78	#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
77eea280	79	#endif
8a3f6bb6 EBS	80	#define CONFIG_CMD_DHCP
	81	#define CONFIG_CMD_PING
	82	#define CONFIG_CMD_NFS /* NFS support */
8a3f6bb6	83
e37e954e	84	/#undef CONFIG_ENV_IS_NOWHERE/
8a3f6bb6 EBS	85
8a3f6bb6 EBS	86	#define CONFIG_EXTRA_ENV_SETTINGS \
304a46ca EBS	87	"usbtty=cdc_acm\0" \
304a46ca EBS	88	"loadaddr=0x82000000\0" \
a2fa28bc JMC	89	"dtbaddr=0x81600000\0" \
	90	"bootdir=/boot\0" \
	91	"bootfile=zImage\0" \
304a46ca	92	"usbtty=cdc_acm\0" \
e5e73c17	93	"console=ttyO2,115200n8\0" \
f1e445c3	94	"mpurate=auto\0" \
304a46ca EBS	95	"vram=12M\0" \
	96	"dvimode=1024x768MR-16@60\0" \
	97	"defaultdisplay=dvi\0" \
	98	"mmcdev=0\0" \
	99	"mmcroot=/dev/mmcblk0p2 rw\0" \
b4ebeb86	100	"mmcrootfstype=ext4 rootwait\0" \
304a46ca EBS	101	"nandroot=/dev/mtdblock4 rw\0" \
	102	"nandrootfstype=jffs2\0" \
	103	"mmcargs=setenv bootargs console=${console} " \
	104	"mpurate=${mpurate} " \
	105	"vram=${vram} " \
	106	"omapfb.mode=dvi:${dvimode} " \
	107	"omapfb.debug=y " \
	108	"omapdss.def_disp=${defaultdisplay} " \
	109	"root=${mmcroot} " \
	110	"rootfstype=${mmcrootfstype}\0" \
	111	"nandargs=setenv bootargs console=${console} " \
	112	"mpurate=${mpurate} " \
	113	"vram=${vram} " \
	114	"omapfb.mode=dvi:${dvimode} " \
	115	"omapfb.debug=y " \
	116	"omapdss.def_disp=${defaultdisplay} " \
	117	"root=${nandroot} " \
	118	"rootfstype=${nandrootfstype}\0" \
2be6bed0	119	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
1b8ec016 EBS	120	"importbootenv=echo Importing environment from mmc ...; " \
1b8ec016 EBS	121	"env import -t $loadaddr $filesize\0" \
a2fa28bc JMC	122	"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
a2fa28bc JMC	123	"loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
304a46ca EBS	124	"mmcboot=echo Booting from mmc ...; " \
304a46ca EBS	125	"run mmcargs; " \
2be6bed0	126	"bootz ${loadaddr}\0" \
a2fa28bc JMC	127	"mmcbootfdt=echo Booting with DT from mmc ...; " \
a2fa28bc JMC	128	"bootz ${loadaddr} - ${dtbaddr}\0" \
304a46ca EBS	129	"nandboot=echo Booting from onenand ...; " \
	130	"run nandargs; " \
	131	"onenand read ${loadaddr} 280000 400000; " \
2be6bed0	132	"bootz ${loadaddr}\0" \
304a46ca EBS	133
304a46ca EBS	134	#define CONFIG_BOOTCOMMAND \
66968110	135	"mmc dev ${mmcdev}; if mmc rescan; then " \
1b8ec016 EBS	136	"echo SD/MMC found on device ${mmcdev};" \
	137	"if run loadbootenv; then " \
	138	"run importbootenv;" \
	139	"fi;" \
	140	"if test -n $uenvcmd; then " \
	141	"echo Running uenvcmd ...;" \
	142	"run uenvcmd;" \
	143	"fi;" \
2be6bed0	144	"if run loadzimage; then " \
a2fa28bc JMC	145	"if test -n $dtbfile; then " \
	146	"if run loadfdt; then " \
	147	"run mmcbootfdt;" \
	148	"fi;" \
	149	"fi;" \
1b8ec016 EBS	150	"run mmcboot;" \
	151	"fi;" \
	152	"fi;" \
	153	"run nandboot;" \
8a3f6bb6	154
8a3f6bb6 EBS	155	/*
	156	* FLASH and environment organization
	157	*/
	158
ca511cfb	159	#ifdef CONFIG_BOOT_ONENAND
8a3f6bb6 EBS	160	#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
	161
	162	#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
	163
	164	#define CONFIG_ENV_IS_IN_ONENAND 1
	165	#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
	166	#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
ca511cfb JMC	167	#endif
ca511cfb JMC	168
e37e954e	169	#ifdef CONFIG_NAND
ca511cfb JMC	170	#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
	171	#define CONFIG_ENV_IS_IN_NAND 1
	172	#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
	173	#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
ca511cfb	174	#endif
8a3f6bb6	175
8a3f6bb6 EBS	176	/*
	177	* SMSC911x Ethernet
	178	*/
	179	#if defined(CONFIG_CMD_NET)
8a3f6bb6 EBS	180	#define CONFIG_SMC911X
	181	#define CONFIG_SMC911X_32_BIT
	182	#define CONFIG_SMC911X_BASE 0x2C000000
	183	#endif /* (CONFIG_CMD_NET) */
	184
e37e954e	185	/* OneNAND boot config */
d271a611 JMC	186	#ifdef CONFIG_BOOT_ONENAND
d271a611 JMC	187	#define CONFIG_SPL_ONENAND_SUPPORT
d271a611 JMC	188	#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
	189	#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
	190	#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
	191	#define CONFIG_SPL_ONENAND_LOAD_SIZE \
	192	(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
	193
	194	#endif
	195
d271a611	196	/* NAND boot config */
e37e954e	197	#ifdef CONFIG_NAND
b80a6603	198	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
d271a611 JMC	199	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	200	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	201	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	202	#define CONFIG_SYS_NAND_OOBSIZE 64
	203	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	204	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
	205	#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
	206	10, 11, 12, 13}
	207	#define CONFIG_SYS_NAND_ECCSIZE 512
	208	#define CONFIG_SYS_NAND_ECCBYTES 3
3f719069	209	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
434f2cfc	210	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	211	/* NAND: SPL falcon mode configs */
	212	#ifdef CONFIG_SPL_OS_BOOT
	213	#define CONFIG_CMD_SPL_NAND_OFS 0x240000
	214	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
	215	#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
	216	#endif
d271a611 JMC	217	#endif
d271a611 JMC	218
dc7a9e64	219	#endif /* __IGEP00X0_H */