include/configs/dbau1x00.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for the dbau1x00 board.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_MIPS32           1  /* MIPS32 CPU core   */
  16 #define CONFIG_DBAU1X00         1
  17 #define CONFIG_SOC_AU1X00       1  /* alchemy series cpu */
  18
  19 #ifdef CONFIG_DBAU1000
  20 /* Also known as Merlot */
  21 #define CONFIG_SOC_AU1000       1
  22 #else
  23 #ifdef CONFIG_DBAU1100
  24 #define CONFIG_SOC_AU1100       1
  25 #else
  26 #ifdef CONFIG_DBAU1500
  27 #define CONFIG_SOC_AU1500       1
  28 #else
  29 #ifdef CONFIG_DBAU1550
  30 /* Cabernet */
  31 #define CONFIG_SOC_AU1550       1
  32 #else
  33 #error "No valid board set"
  34 #endif
  35 #endif
  36 #endif
  37 #endif
  38
  39 #define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
  40
  41 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds     */
  42
  43 #define CONFIG_BAUDRATE         115200
  44
  45 /* valid baudrates */
  46
  47 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  48 #undef  CONFIG_BOOTARGS
  49
  50 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  51         "addmisc=setenv bootargs ${bootargs} "                          \
  52                 "console=ttyS0,${baudrate} "                            \
  53                 "panic=1\0"                                             \
  54         "bootfile=/tftpboot/vmlinux.srec\0"                             \
  55         "load=tftp 80500000 ${u-boot}\0"                                \
  56         ""
  57
  58 #ifdef CONFIG_DBAU1550
  59 /* Boot from flash by default, revert to bootp */
  60 #define CONFIG_BOOTCOMMAND      "bootm 0xbfc20000; bootp; bootm"
  61 #else /* CONFIG_DBAU1550 */
  62 #define CONFIG_BOOTCOMMAND      "bootp;bootm"
  63 #endif /* CONFIG_DBAU1550 */
  64
  65
  66 /*
  67  * BOOTP options
  68  */
  69 #define CONFIG_BOOTP_BOOTFILESIZE
  70 #define CONFIG_BOOTP_BOOTPATH
  71 #define CONFIG_BOOTP_GATEWAY
  72 #define CONFIG_BOOTP_HOSTNAME
  73
  74
  75 /*
  76  * Command line configuration.
  77  */
  78 #include <config_cmd_default.h>
  79
  80 #undef CONFIG_CMD_BDI
  81 #undef CONFIG_CMD_BEDBUG
  82 #undef CONFIG_CMD_ELF
  83 #undef CONFIG_CMD_SAVEENV
  84 #undef CONFIG_CMD_FAT
  85 #undef CONFIG_CMD_FPGA
  86 #undef CONFIG_CMD_MII
  87 #undef CONFIG_CMD_RUN
  88
  89
  90 #ifdef CONFIG_DBAU1550
  91
  92 #define CONFIG_CMD_FLASH
  93 #define CONFIG_CMD_LOADB
  94 #define CONFIG_CMD_NET
  95
  96 #undef CONFIG_CMD_I2C
  97 #undef CONFIG_CMD_IDE
  98 #undef CONFIG_CMD_NFS
  99 #undef CONFIG_CMD_PCMCIA
 100
 101 #else
 102
 103 #define CONFIG_CMD_IDE
 104 #define CONFIG_CMD_DHCP
 105
 106 #undef CONFIG_CMD_FLASH
 107 #undef CONFIG_CMD_LOADB
 108 #undef CONFIG_CMD_LOADS
 109
 110 #endif
 111
 112
 113 /*
 114  * Miscellaneous configurable options
 115  */
 116 #define CONFIG_SYS_LONGHELP                             /* undef to save memory      */
 117
 118 #define CONFIG_SYS_PROMPT               "DbAu1xx0 # "   /* Monitor Command Prompt    */
 119
 120 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size   */
 121 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
 122 #define CONFIG_SYS_MAXARGS              16              /* max number of command args*/
 123
 124 #define CONFIG_SYS_MALLOC_LEN           128*1024
 125
 126 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
 127
 128 #define CONFIG_SYS_MHZ                  396
 129
 130 #if (CONFIG_SYS_MHZ % 12) != 0
 131 #error "Invalid CPU frequency - must be multiple of 12!"
 132 #endif
 133
 134 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
 135
 136 #define CONFIG_SYS_SDRAM_BASE           0x80000000     /* Cached addr */
 137
 138 #define CONFIG_SYS_LOAD_ADDR            0x81000000     /* default load address  */
 139
 140 #define CONFIG_SYS_MEMTEST_START        0x80100000
 141 #define CONFIG_SYS_MEMTEST_END          0x80800000
 142
 143 /*-----------------------------------------------------------------------
 144  * FLASH and environment organization
 145  */
 146 #ifdef CONFIG_DBAU1550
 147
 148 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
 149 #define CONFIG_SYS_MAX_FLASH_SECT       (512)   /* max number of sectors on one chip */
 150
 151 #define PHYS_FLASH_1            0xb8000000 /* Flash Bank #1 */
 152 #define PHYS_FLASH_2            0xbc000000 /* Flash Bank #2 */
 153
 154 #else /* CONFIG_DBAU1550 */
 155
 156 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
 157 #define CONFIG_SYS_MAX_FLASH_SECT       (128)   /* max number of sectors on one chip */
 158
 159 #define PHYS_FLASH_1            0xbec00000 /* Flash Bank #1 */
 160 #define PHYS_FLASH_2            0xbfc00000 /* Flash Bank #2 */
 161
 162 #endif /* CONFIG_DBAU1550 */
 163
 164 #define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
 165
 166 #define CONFIG_SYS_FLASH_CFI           1
 167 #define CONFIG_FLASH_CFI_DRIVER    1
 168
 169 /* The following #defines are needed to get flash environment right */
 170 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 171 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 172
 173 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 174
 175 /* We boot from this flash, selected with dip switch */
 176 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_2
 177
 178 /* timeout values are in ticks */
 179 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 180 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 181
 182 #define CONFIG_ENV_IS_NOWHERE   1
 183
 184 /* Address and size of Primary Environment Sector       */
 185 #define CONFIG_ENV_ADDR         0xB0030000
 186 #define CONFIG_ENV_SIZE         0x10000
 187
 188 #define CONFIG_FLASH_16BIT
 189
 190 #define CONFIG_NR_DRAM_BANKS    2
 191
 192
 193 #ifdef CONFIG_DBAU1550
 194 #define MEM_SIZE 192
 195 #else
 196 #define MEM_SIZE 64
 197 #endif
 198
 199 #define CONFIG_MEMSIZE_IN_BYTES
 200
 201 #ifndef CONFIG_DBAU1550
 202 /*---ATA PCMCIA ------------------------------------*/
 203 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
 204 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
 205 #define CONFIG_PCMCIA_SLOT_A
 206
 207 #define CONFIG_ATAPI 1
 208 #define CONFIG_MAC_PARTITION 1
 209
 210 /* We run CF in "true ide" mode or a harddrive via pcmcia */
 211 #define CONFIG_IDE_PCMCIA 1
 212
 213 /* We only support one slot for now */
 214 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 215 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 216
 217 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 218 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 219
 220 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 221
 222 #define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 223
 224 /* Offset for data I/O                  */
 225 #define CONFIG_SYS_ATA_DATA_OFFSET     8
 226
 227 /* Offset for normal register accesses  */
 228 #define CONFIG_SYS_ATA_REG_OFFSET      0
 229
 230 /* Offset for alternate registers       */
 231 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 232 #endif /* CONFIG_DBAU1550 */
 233
 234 /*-----------------------------------------------------------------------
 235  * Cache Configuration
 236  */
 237 #define CONFIG_SYS_DCACHE_SIZE          16384
 238 #define CONFIG_SYS_ICACHE_SIZE          16384
 239 #define CONFIG_SYS_CACHELINE_SIZE       32
 240
 241 #endif  /* __CONFIG_H */